mac80211: Update mesh config IE to 11s draft 3.02
The mesh config information element has changed significantly since draft 1.08
This patch brings it up to date.
Thanks to Sam Leffler and Rui Paulo for identifying this.
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 21556a2..52e15e0 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -115,7 +115,7 @@
#define IEEE80211_MAX_SSID_LEN 32
#define IEEE80211_MAX_MESH_ID_LEN 32
-#define IEEE80211_MESH_CONFIG_LEN 19
+#define IEEE80211_MESH_CONFIG_LEN 24
#define IEEE80211_QOS_CTL_LEN 2
#define IEEE80211_QOS_CTL_TID_MASK 0x000F
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 93e618a..455cc7a 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -367,6 +367,10 @@
u8 mesh_pm_id[4];
/* Congestion Control Mode Identifier */
u8 mesh_cc_id[4];
+ /* Synchronization Protocol Identifier */
+ u8 mesh_sp_id[4];
+ /* Authentication Protocol Identifier */
+ u8 mesh_auth_id[4];
/* Local mesh Destination Sequence Number */
u32 dsn;
/* Last used PREQ ID */
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 3185e18..f7364e5 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -18,8 +18,11 @@
#define PP_OFFSET 1 /* Path Selection Protocol */
#define PM_OFFSET 5 /* Path Selection Metric */
#define CC_OFFSET 9 /* Congestion Control Mode */
-#define CAPAB_OFFSET 17
-#define ACCEPT_PLINKS 0x80
+#define SP_OFFSET 13 /* Synchronization Protocol */
+#define AUTH_OFFSET 17 /* Authentication Protocol */
+#define CAPAB_OFFSET 22
+#define CAPAB_ACCEPT_PLINKS 0x80
+#define CAPAB_FORWARDING 0x10
#define TMR_RUNNING_HK 0
#define TMR_RUNNING_MP 1
@@ -84,7 +87,9 @@
memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
memcmp(ifmsh->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 &&
memcmp(ifmsh->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 &&
- memcmp(ifmsh->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0)
+ memcmp(ifmsh->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0 &&
+ memcmp(ifmsh->mesh_sp_id, ie->mesh_config + SP_OFFSET, 4) == 0 &&
+ memcmp(ifmsh->mesh_auth_id, ie->mesh_config + AUTH_OFFSET, 4) == 0)
return true;
return false;
@@ -97,7 +102,7 @@
*/
bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
{
- return (*(ie->mesh_config + CAPAB_OFFSET) & ACCEPT_PLINKS) != 0;
+ return (*(ie->mesh_config + CAPAB_OFFSET) & CAPAB_ACCEPT_PLINKS) != 0;
}
/**
@@ -123,11 +128,18 @@
void mesh_ids_set_default(struct ieee80211_if_mesh *sta)
{
- u8 def_id[4] = {0x00, 0x0F, 0xAC, 0xff};
+ u8 oui[3] = {0x00, 0x0F, 0xAC};
- memcpy(sta->mesh_pp_id, def_id, 4);
- memcpy(sta->mesh_pm_id, def_id, 4);
- memcpy(sta->mesh_cc_id, def_id, 4);
+ memcpy(sta->mesh_pp_id, oui, sizeof(oui));
+ memcpy(sta->mesh_pm_id, oui, sizeof(oui));
+ memcpy(sta->mesh_cc_id, oui, sizeof(oui));
+ memcpy(sta->mesh_sp_id, oui, sizeof(oui));
+ memcpy(sta->mesh_auth_id, oui, sizeof(oui));
+ sta->mesh_pp_id[sizeof(oui)] = 0;
+ sta->mesh_pm_id[sizeof(oui)] = 0;
+ sta->mesh_cc_id[sizeof(oui)] = 0xff;
+ sta->mesh_sp_id[sizeof(oui)] = 0xff;
+ sta->mesh_auth_id[sizeof(oui)] = 0x0;
}
int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
@@ -245,7 +257,7 @@
if (sdata->u.mesh.mesh_id_len)
memcpy(pos, sdata->u.mesh.mesh_id, sdata->u.mesh.mesh_id_len);
- pos = skb_put(skb, 21);
+ pos = skb_put(skb, 2 + IEEE80211_MESH_CONFIG_LEN);
*pos++ = WLAN_EID_MESH_CONFIG;
*pos++ = IEEE80211_MESH_CONFIG_LEN;
/* Version */
@@ -263,15 +275,22 @@
memcpy(pos, sdata->u.mesh.mesh_cc_id, 4);
pos += 4;
- /* Channel precedence:
- * Not running simple channel unification protocol
- */
- memset(pos, 0x00, 4);
+ /* Synchronization protocol identifier */
+ memcpy(pos, sdata->u.mesh.mesh_sp_id, 4);
pos += 4;
+ /* Authentication Protocol identifier */
+ memcpy(pos, sdata->u.mesh.mesh_auth_id, 4);
+ pos += 4;
+
+ /* Mesh Formation Info */
+ memset(pos, 0x00, 1);
+ pos += 1;
+
/* Mesh capability */
sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata);
- *pos++ = sdata->u.mesh.accepting_plinks ? ACCEPT_PLINKS : 0x00;
+ *pos = CAPAB_FORWARDING;
+ *pos++ |= sdata->u.mesh.accepting_plinks ? CAPAB_ACCEPT_PLINKS : 0x00;
*pos++ = 0x00;
return;