dmaengine: at_hdmac: modify way to use interrupts
Now we use Buffer Transfer Completed interrupts. If we
want a chained buffer completed information, we setup the
ATC_IEN bit in CTRLB register in the lli.
This is done by set_desc_eol() function and used by
memcpy/slave_sg functions.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 3d7d705..13050e6 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -464,7 +464,7 @@
for (i = 0; i < atdma->dma_common.chancnt; i++) {
atchan = &atdma->chan[i];
- if (pending & (AT_DMA_CBTC(i) | AT_DMA_ERR(i))) {
+ if (pending & (AT_DMA_BTC(i) | AT_DMA_ERR(i))) {
if (pending & AT_DMA_ERR(i)) {
/* Disable channel on AHB error */
dma_writel(atdma, CHDR, atchan->mask);
@@ -549,7 +549,7 @@
}
ctrla = ATC_DEFAULT_CTRLA;
- ctrlb = ATC_DEFAULT_CTRLB
+ ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN
| ATC_SRC_ADDR_MODE_INCR
| ATC_DST_ADDR_MODE_INCR
| ATC_FC_MEM2MEM;
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 495457e..8303306 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -309,8 +309,8 @@
struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
u32 ebci;
- /* enable interrupts on buffer chain completion & error */
- ebci = AT_DMA_CBTC(atchan->chan_common.chan_id)
+ /* enable interrupts on buffer transfer completion & error */
+ ebci = AT_DMA_BTC(atchan->chan_common.chan_id)
| AT_DMA_ERR(atchan->chan_common.chan_id);
if (on)
dma_writel(atdma, EBCIER, ebci);
@@ -347,7 +347,12 @@
*/
static void set_desc_eol(struct at_desc *desc)
{
- desc->lli.ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS;
+ u32 ctrlb = desc->lli.ctrlb;
+
+ ctrlb &= ~ATC_IEN;
+ ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS;
+
+ desc->lli.ctrlb = ctrlb;
desc->lli.dscr = 0;
}