ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
The S3C2443 clock code could easily make use of the clksrc implementation
in plat-samsung for many of the clocks. Make the clocks that easily move
to clksrc-clk over, update any initialisation and remove the old register
definitions from the header file (it is only being used once).
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 5d061ea..f89e71f 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2443/clock.c
*
- * Copyright (c) 2007 Simtec Electronics
+ * Copyright (c) 2007,2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2443 Clock control support
@@ -42,6 +42,7 @@
#include <plat/s3c2443.h>
#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
/* We currently have to assume that the system is running
@@ -82,45 +83,7 @@
return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
}
-static unsigned long s3c2443_roundrate_clksrc(struct clk *clk,
- unsigned long rate,
- unsigned int max)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- /* note, we remove the +/- 1 calculations as they cancel out */
-
- div = (rate / parent_rate);
-
- if (div < 1)
- div = 1;
- else if (div > max)
- div = max;
-
- return parent_rate / div;
-}
-
-static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk,
- unsigned long rate)
-{
- return s3c2443_roundrate_clksrc(clk, rate, 4);
-}
-
-static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk,
- unsigned long rate)
-{
- return s3c2443_roundrate_clksrc(clk, rate, 16);
-}
-
-static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
- unsigned long rate)
-{
- return s3c2443_roundrate_clksrc(clk, rate, 256);
-}
+/* s3c2443_roundate_clksrc is close enough to s3c_roundate_clksrc */
/* clock selections */
@@ -143,31 +106,23 @@
.id = -1,
};
-static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+static struct clk *clk_epllref_sources[] = {
+ [0] = &clk_mpllref,
+ [1] = &clk_mpllref,
+ [2] = &clk_xtal,
+ [3] = &clk_ext,
+};
- clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK;
-
- if (parent == &clk_xtal)
- clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL;
- else if (parent == &clk_ext)
- clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK;
- else if (parent != &clk_mpllref)
- return -EINVAL;
-
- __raw_writel(clksrc, S3C2443_CLKSRC);
- clk->parent = parent;
-
- return 0;
-}
-
-static struct clk clk_epllref = {
- .name = "epllref",
- .id = -1,
- .ops = &(struct clk_ops) {
- .set_parent = s3c2443_setparent_epllref,
+static struct clksrc_clk clk_epllref = {
+ .clk = {
+ .name = "epllref",
+ .id = -1,
},
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_epllref_sources,
+ .nr_sources = ARRAY_SIZE(clk_epllref_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
};
static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
@@ -273,7 +228,7 @@
if (parent == &clk_epll)
clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL;
- else if (parent == &clk_epllref)
+ else if (parent == &clk_epllref.clk)
clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL;
else
return -EINVAL;
@@ -298,87 +253,30 @@
* UART baud-rate clock sourced from esysclk via a divisor
*/
-static unsigned long s3c2443_getrate_uart(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_UARTDIV_MASK;
- div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-
-static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc16(clk, rate);
- rate = parent_rate / rate;
-
- clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
- clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_uart = {
- .name = "uartclk",
- .id = -1,
- .parent = &clk_esysclk,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_getrate_uart,
- .set_rate = s3c2443_setrate_uart,
- .round_rate = s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_uart = {
+ .clk = {
+ .name = "uartclk",
+ .id = -1,
+ .parent = &clk_esysclk,
},
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
};
+
/* hsspi
*
* high-speed spi clock, sourced from esysclk
*/
-static unsigned long s3c2443_getrate_hsspi(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_HSSPIDIV_MASK;
- div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-
-static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc4(clk, rate);
- rate = parent_rate / rate;
-
- clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK;
- clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_hsspi = {
- .name = "hsspi",
- .id = -1,
- .parent = &clk_esysclk,
- .ctrlbit = S3C2443_SCLKCON_HSSPICLK,
- .enable = s3c2443_clkcon_enable_s,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_getrate_hsspi,
- .set_rate = s3c2443_setrate_hsspi,
- .round_rate = s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_hsspi = {
+ .clk = {
+ .name = "hsspi",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .ctrlbit = S3C2443_SCLKCON_HSSPICLK,
+ .enable = s3c2443_clkcon_enable_s,
},
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
};
/* usbhost
@@ -386,43 +284,15 @@
* usb host bus-clock, usually 48MHz to provide USB bus clock timing
*/
-static unsigned long s3c2443_getrate_usbhost(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK;
- div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc4(clk, rate);
- rate = parent_rate / rate;
-
- clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK;
- clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_usb_bus_host = {
- .name = "usb-bus-host-parent",
- .id = -1,
- .parent = &clk_esysclk,
- .ctrlbit = S3C2443_SCLKCON_USBHOST,
- .enable = s3c2443_clkcon_enable_s,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_getrate_usbhost,
- .set_rate = s3c2443_setrate_usbhost,
- .round_rate = s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_usb_bus_host = {
+ .clk = {
+ .name = "usb-bus-host-parent",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .ctrlbit = S3C2443_SCLKCON_USBHOST,
+ .enable = s3c2443_clkcon_enable_s,
},
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
};
/* clk_hsmcc_div
@@ -432,41 +302,13 @@
* be fed to the hsmmc block
*/
-static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_HSMMCDIV_MASK;
- div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc4(clk, rate);
- rate = parent_rate / rate;
-
- clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK;
- clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_hsmmc_div = {
- .name = "hsmmc-div",
- .id = -1,
- .parent = &clk_esysclk,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_getrate_hsmmc_div,
- .set_rate = s3c2443_setrate_hsmmc_div,
- .round_rate = s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_hsmmc_div = {
+ .clk = {
+ .name = "hsmmc-div",
+ .id = -1,
+ .parent = &clk_esysclk,
},
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
};
static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
@@ -499,7 +341,7 @@
static struct clk clk_hsmmc = {
.name = "hsmmc-if",
.id = -1,
- .parent = &clk_hsmmc_div,
+ .parent = &clk_hsmmc_div.clk,
.enable = s3c2443_enable_hsmmc,
.ops = &(struct clk_ops) {
.set_parent = s3c2443_setparent_hsmmc,
@@ -508,79 +350,46 @@
/* i2s_eplldiv
*
- * this clock is the output from the i2s divisor of esysclk
+ * This clock is the output from the I2S divisor of ESYSCLK, and is seperate
+ * from the mux that comes after it (cannot merge into one single clock)
*/
-static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_I2SDIV_MASK;
- div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc16(clk, rate);
- rate = parent_rate / rate;
-
- clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK;
- clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_i2s_eplldiv = {
- .name = "i2s-eplldiv",
- .id = -1,
- .parent = &clk_esysclk,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_getrate_i2s_eplldiv,
- .set_rate = s3c2443_setrate_i2s_eplldiv,
- .round_rate = s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_i2s_eplldiv = {
+ .clk = {
+ .name = "i2s-eplldiv",
+ .id = -1,
+ .parent = &clk_esysclk,
},
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
};
/* i2s-ref
*
* i2s bus reference clock, selectable from external, esysclk or epllref
+ *
+ * Note, this used to be two clocks, but was compressed into one.
*/
-static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+struct clk *clk_i2s_srclist[] = {
+ [0] = &clk_i2s_eplldiv.clk,
+ [1] = &clk_i2s_ext,
+ [2] = &clk_epllref.clk,
+ [3] = &clk_epllref.clk,
+};
- clksrc &= ~S3C2443_CLKSRC_I2S_MASK;
+static struct clksrc_clk clk_i2s = {
+ .clk = {
+ .name = "i2s-if",
+ .id = -1,
+ .ctrlbit = S3C2443_SCLKCON_I2SCLK,
+ .enable = s3c2443_clkcon_enable_s,
- if (parent == &clk_epllref)
- clksrc |= S3C2443_CLKSRC_I2S_EPLLREF;
- else if (parent == &clk_i2s_ext)
- clksrc |= S3C2443_CLKSRC_I2S_EXT;
- else if (parent != &clk_i2s_eplldiv)
- return -EINVAL;
-
- clk->parent = parent;
- __raw_writel(clksrc, S3C2443_CLKSRC);
-
- return 0;
-}
-
-static struct clk clk_i2s = {
- .name = "i2s-if",
- .id = -1,
- .parent = &clk_i2s_eplldiv,
- .ctrlbit = S3C2443_SCLKCON_I2SCLK,
- .enable = s3c2443_clkcon_enable_s,
- .ops = &(struct clk_ops) {
- .set_parent = s3c2443_setparent_i2s,
},
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_i2s_srclist,
+ .nr_sources = ARRAY_SIZE(clk_i2s_srclist),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
};
/* cam-if
@@ -588,43 +397,15 @@
* camera interface bus-clock, divided down from esysclk
*/
-static unsigned long s3c2443_getrate_cam(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_CAMDIV_MASK;
- div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc16(clk, rate);
- rate = parent_rate / rate;
-
- clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK;
- clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT;
-
- __raw_writel(clkdiv1, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_cam = {
- .name = "camif-upll", /* same as 2440 name */
- .id = -1,
- .parent = &clk_esysclk,
- .ctrlbit = S3C2443_SCLKCON_CAMCLK,
- .enable = s3c2443_clkcon_enable_s,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_getrate_cam,
- .set_rate = s3c2443_setrate_cam,
- .round_rate = s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_cam = {
+ .clk = {
+ .name = "camif-upll", /* same as 2440 name */
+ .id = -1,
+ .parent = &clk_esysclk,
+ .ctrlbit = S3C2443_SCLKCON_CAMCLK,
+ .enable = s3c2443_clkcon_enable_s,
},
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
};
/* display-if
@@ -632,43 +413,15 @@
* display interface clock, divided from esysclk
*/
-static unsigned long s3c2443_getrate_display(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_DISPDIV_MASK;
- div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_display(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc256(clk, rate);
- rate = parent_rate / rate;
-
- clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
- clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_display = {
- .name = "display-if",
- .id = -1,
- .parent = &clk_esysclk,
- .ctrlbit = S3C2443_SCLKCON_DISPCLK,
- .enable = s3c2443_clkcon_enable_s,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_getrate_display,
- .set_rate = s3c2443_setrate_display,
- .round_rate = s3c2443_roundrate_clksrc256,
+static struct clksrc_clk clk_display = {
+ .clk = {
+ .name = "display-if",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .ctrlbit = S3C2443_SCLKCON_DISPCLK,
+ .enable = s3c2443_clkcon_enable_s,
},
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
};
/* prediv
@@ -865,7 +618,7 @@
}, {
.name = "usb-bus-host",
.id = -1,
- .parent = &clk_usb_bus_host,
+ .parent = &clk_usb_bus_host.clk,
}, {
.name = "ac97",
.id = -1,
@@ -887,50 +640,27 @@
return clk_set_parent(clk, parent);
}
+static struct clksrc_clk __initdata *init_list[] = {
+ &clk_epllref, /* should be first */
+ &clk_i2s_eplldiv,
+ &clk_i2s,
+ &clk_cam,
+ &clk_uart,
+ &clk_display,
+ &clk_hsmmc_div,
+ &clk_usb_bus_host,
+};
+
static void __init s3c2443_clk_initparents(void)
{
unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
struct clk *parent;
-
- switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) {
- case S3C2443_CLKSRC_EPLLREF_EXTCLK:
- parent = &clk_ext;
- break;
-
- case S3C2443_CLKSRC_EPLLREF_XTAL:
- default:
- parent = &clk_xtal;
- break;
-
- case S3C2443_CLKSRC_EPLLREF_MPLLREF:
- case S3C2443_CLKSRC_EPLLREF_MPLLREF2:
- parent = &clk_mpllref;
- break;
- }
-
- clk_init_set_parent(&clk_epllref, parent);
-
- switch (clksrc & S3C2443_CLKSRC_I2S_MASK) {
- case S3C2443_CLKSRC_I2S_EXT:
- parent = &clk_i2s_ext;
- break;
-
- case S3C2443_CLKSRC_I2S_EPLLDIV:
- default:
- parent = &clk_i2s_eplldiv;
- break;
-
- case S3C2443_CLKSRC_I2S_EPLLREF:
- case S3C2443_CLKSRC_I2S_EPLLREF3:
- parent = &clk_epllref;
- }
-
- clk_init_set_parent(&clk_i2s, &clk_epllref);
+ int ptr;
/* esysclk source */
parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ?
- &clk_epll : &clk_epllref;
+ &clk_epll : &clk_epllref.clk;
clk_init_set_parent(&clk_esysclk, parent);
@@ -953,6 +683,9 @@
parent = &clk_armdiv;
clk_init_set_parent(&clk_arm, parent);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(init_list); ptr++)
+ s3c_set_clksrc(init_list[ptr], false);
}
/* armdiv divisor table */
@@ -984,15 +717,9 @@
/* clocks to add straight away */
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
+static struct clksrc_clk *clksrcs[] __initdata = {
&clk_usb_bus_host,
- &clk_usb_bus,
- &clk_esysclk,
&clk_epllref,
- &clk_mpllref,
- &clk_msysclk,
&clk_uart,
&clk_display,
&clk_cam,
@@ -1000,6 +727,15 @@
&clk_i2s,
&clk_hsspi,
&clk_hsmmc_div,
+};
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_epll,
+ &clk_usb_bus,
+ &clk_esysclk,
+ &clk_mpllref,
+ &clk_msysclk,
&clk_hsmmc,
&clk_armdiv,
&clk_arm,
@@ -1064,15 +800,18 @@
}
}
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_register_clksrc(clksrcs[ptr], 1);
+
clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
- clk_epll.parent = &clk_epllref;
- clk_usb_bus.parent = &clk_usb_bus_host;
+ clk_epll.parent = &clk_epllref.clk;
+ clk_usb_bus.parent = &clk_usb_bus_host.clk;
/* ensure usb bus clock is within correct rate of 48MHz */
- if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) {
+ if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
- clk_set_rate(&clk_usb_bus_host, 48*1000*1000);
+ clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
}
printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",