icplus: fix interrupt for IC+ 101A/G and 1001LF
This patch fixes and adds the irq handler for the
IC+ 101A/G where we need to read the reg17 to clean
the irq.
Also remove the flag for the 1001LF where no interrupt
can be used for this device.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index f08c85a..5ac46f5 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -40,6 +40,7 @@
#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */
#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */
+#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */
static int ip175c_config_init(struct phy_device *phydev)
{
@@ -185,6 +186,15 @@
return 0;
}
+static int ip101a_g_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
static struct phy_driver ip175c_driver = {
.phy_id = 0x02430d80,
.name = "ICPlus IP175C",
@@ -204,7 +214,6 @@
.phy_id_mask = 0x0ffffff0,
.features = PHY_GBIT_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause,
- .flags = PHY_HAS_INTERRUPT,
.config_init = &ip1001_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
@@ -220,6 +229,7 @@
.features = PHY_BASIC_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause,
.flags = PHY_HAS_INTERRUPT,
+ .ack_interrupt = ip101a_g_ack_interrupt,
.config_init = &ip101a_g_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,