[SCSI] lpfc 8.3.39: Fix driver issues with large s/g lists for BlockGuard
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index b2227fc..1874b32 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4730,24 +4730,53 @@
return -ENOMEM;
/*
- * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+ * Since lpfc_sg_seg_cnt is module parameter, the sg_dma_buf_size
* used to create the sg_dma_buf_pool must be dynamically calculated.
- * 2 segments are added since the IOCB needs a command and response bde.
*/
- phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
- sizeof(struct fcp_rsp) +
- ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
- if (phba->cfg_enable_bg) {
- phba->cfg_sg_seg_cnt = LPFC_MAX_BPL_SEG_CNT;
- phba->cfg_sg_dma_buf_size +=
- phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
- }
-
- /* Also reinitialize the host templates with new values. */
+ /* Initialize the host templates the configured values. */
lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ /* There are going to be 2 reserved BDEs: 1 FCP cmnd + 1 FCP rsp */
+ if (phba->cfg_enable_bg) {
+ /*
+ * The scsi_buf for a T10-DIF I/O will hold the FCP cmnd,
+ * the FCP rsp, and a BDE for each. Sice we have no control
+ * over how many protection data segments the SCSI Layer
+ * will hand us (ie: there could be one for every block
+ * in the IO), we just allocate enough BDEs to accomidate
+ * our max amount and we need to limit lpfc_sg_seg_cnt to
+ * minimize the risk of running out.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ (LPFC_MAX_SG_SEG_CNT * sizeof(struct ulp_bde64));
+
+ if (phba->cfg_sg_seg_cnt > LPFC_MAX_SG_SEG_CNT_DIF)
+ phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT_DIF;
+
+ /* Total BDEs in BPL for scsi_sg_list and scsi_sg_prot_list */
+ phba->cfg_total_seg_cnt = LPFC_MAX_SG_SEG_CNT;
+ } else {
+ /*
+ * The scsi_buf for a regular I/O will hold the FCP cmnd,
+ * the FCP rsp, a BDE for each, and a BDE for up to
+ * cfg_sg_seg_cnt data segments.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
+
+ /* Total BDEs in BPL for scsi_sg_list */
+ phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + 2;
+ }
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
+ "9088 sg_tablesize:%d dmabuf_size:%d total_bde:%d\n",
+ phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size,
+ phba->cfg_total_seg_cnt);
+
phba->max_vpi = LPFC_MAX_VPI;
/* This will be set to correct value after config_port mbox */
phba->max_vports = 0;
@@ -4814,11 +4843,10 @@
{
struct lpfc_sli *psli;
LPFC_MBOXQ_t *mboxq;
- int rc, i, hbq_count, buf_size, dma_buf_size, max_buf_size;
+ int rc, i, hbq_count, max_buf_size;
uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
struct lpfc_mqe *mqe;
int longs;
- int sges_per_segment;
/* Before proceed, wait for POST done and device ready */
rc = lpfc_sli4_post_status_check(phba);
@@ -4886,11 +4914,6 @@
phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
- /* With BlockGuard we can have multiple SGEs per Data Segemnt */
- sges_per_segment = 1;
- if (phba->cfg_enable_bg)
- sges_per_segment = 2;
-
/*
* For SLI4, instead of using ring 0 (LPFC_FCP_RING) for FCP commands
* we will associate a new ring, for each FCP fastpath EQ/CQ/WQ tuple.
@@ -4910,29 +4933,62 @@
max_buf_size = (2 * SLI4_PAGE_SIZE);
if (phba->cfg_sg_seg_cnt > LPFC_MAX_SGL_SEG_CNT - 2)
phba->cfg_sg_seg_cnt = LPFC_MAX_SGL_SEG_CNT - 2;
- max_buf_size += (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
/*
- * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+ * Since lpfc_sg_seg_cnt is module parameter, the sg_dma_buf_size
* used to create the sg_dma_buf_pool must be dynamically calculated.
- * 2 segments are added since the IOCB needs a command and response bde.
- * To insure that the scsi sgl does not cross a 4k page boundary only
- * sgl sizes of must be a power of 2.
*/
- buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) +
- (((phba->cfg_sg_seg_cnt * sges_per_segment) + 2) *
- sizeof(struct sli4_sge)));
- for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE;
- dma_buf_size < max_buf_size && buf_size > dma_buf_size;
- dma_buf_size = dma_buf_size << 1)
- ;
- if (dma_buf_size == max_buf_size)
- phba->cfg_sg_seg_cnt = (dma_buf_size -
- sizeof(struct fcp_cmnd) - sizeof(struct fcp_rsp) -
- (2 * sizeof(struct sli4_sge))) /
- sizeof(struct sli4_sge);
- phba->cfg_sg_dma_buf_size = dma_buf_size;
+ if (phba->cfg_enable_bg) {
+ /*
+ * The scsi_buf for a T10-DIF I/O will hold the FCP cmnd,
+ * the FCP rsp, and a SGE for each. Sice we have no control
+ * over how many protection data segments the SCSI Layer
+ * will hand us (ie: there could be one for every block
+ * in the IO), we just allocate enough SGEs to accomidate
+ * our max amount and we need to limit lpfc_sg_seg_cnt to
+ * minimize the risk of running out.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) + max_buf_size;
+
+ /* Total SGEs for scsi_sg_list and scsi_sg_prot_list */
+ phba->cfg_total_seg_cnt = LPFC_MAX_SGL_SEG_CNT;
+
+ if (phba->cfg_sg_seg_cnt > LPFC_MAX_SG_SLI4_SEG_CNT_DIF)
+ phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SLI4_SEG_CNT_DIF;
+ } else {
+ /*
+ * The scsi_buf for a regular I/O will hold the FCP cmnd,
+ * the FCP rsp, a SGE for each, and a SGE for up to
+ * cfg_sg_seg_cnt data segments.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
+
+ /* Total SGEs for scsi_sg_list */
+ phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + 2;
+ /*
+ * NOTE: if (phba->cfg_sg_seg_cnt + 2) <= 256 we only need
+ * to post 1 page for the SGL.
+ */
+ }
+
+ /* Initialize the host templates with the updated values. */
+ lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+
+ if (phba->cfg_sg_dma_buf_size <= LPFC_MIN_SG_SLI4_BUF_SZ)
+ phba->cfg_sg_dma_buf_size = LPFC_MIN_SG_SLI4_BUF_SZ;
+ else
+ phba->cfg_sg_dma_buf_size =
+ SLI4_PAGE_ALIGN(phba->cfg_sg_dma_buf_size);
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
+ "9087 sg_tablesize:%d dmabuf_size:%d total_sge:%d\n",
+ phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size,
+ phba->cfg_total_seg_cnt);
/* Initialize buffer queue management fields */
hbq_count = lpfc_sli_hbq_count();