OMAP: LCD panel support for the Siemens SX1 mobile phone
- Add support for LCD panel on Siemens sx1 mobile phone.
Signed-off-by: Trilok Soni <soni.trilok@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index ed13889..99da8b6 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -23,6 +23,7 @@
objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
+objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
omapfb-objs := $(objs-yy)
diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c
new file mode 100644
index 0000000..c4f306a
--- /dev/null
+++ b/drivers/video/omap/lcd_sx1.c
@@ -0,0 +1,334 @@
+/*
+ * LCD panel support for the Siemens SX1 mobile phone
+ *
+ * Current version : Vovan888@gmail.com, great help from FCA00000
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/omapfb.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/mux.h>
+
+/*
+ * OMAP310 GPIO registers
+ */
+#define GPIO_DATA_INPUT 0xfffce000
+#define GPIO_DATA_OUTPUT 0xfffce004
+#define GPIO_DIR_CONTROL 0xfffce008
+#define GPIO_INT_CONTROL 0xfffce00c
+#define GPIO_INT_MASK 0xfffce010
+#define GPIO_INT_STATUS 0xfffce014
+#define GPIO_PIN_CONTROL 0xfffce018
+
+
+#define A_LCD_SSC_RD 3
+#define A_LCD_SSC_SD 7
+#define _A_LCD_RESET 9
+#define _A_LCD_SSC_CS 12
+#define _A_LCD_SSC_A0 13
+
+#define DSP_REG 0xE1017024
+
+const unsigned char INIT_1[12] = {
+ 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
+};
+
+const unsigned char INIT_2[127] = {
+ 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00,
+ 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
+ 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00,
+ 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
+ 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01,
+ 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
+ 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01,
+ 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
+ 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01,
+ 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
+ 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01,
+ 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
+ 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01,
+ 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
+ 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02,
+ 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
+};
+
+const unsigned char INIT_3[15] = {
+ 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
+ 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
+};
+
+static void epson_sendbyte(int flag, unsigned char byte)
+{
+ int i, shifter = 0x80;
+
+ if (!flag)
+ omap_set_gpio_dataout(_A_LCD_SSC_A0, 0);
+ mdelay(2);
+ omap_set_gpio_dataout(A_LCD_SSC_RD, 1);
+
+ omap_set_gpio_dataout(A_LCD_SSC_SD, flag);
+
+ OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
+ OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
+ for (i = 0; i < 8; i++) {
+ OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
+ omap_set_gpio_dataout(A_LCD_SSC_SD, shifter & byte);
+ OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
+ shifter >>= 1;
+ }
+ omap_set_gpio_dataout(_A_LCD_SSC_A0, 1);
+}
+
+static void init_system(void)
+{
+ omap_mcbsp_request(OMAP_MCBSP3);
+ omap_mcbsp_stop(OMAP_MCBSP3);
+}
+
+static void setup_GPIO(void)
+{
+ /* new wave */
+ omap_request_gpio(A_LCD_SSC_RD);
+ omap_request_gpio(A_LCD_SSC_SD);
+ omap_request_gpio(_A_LCD_RESET);
+ omap_request_gpio(_A_LCD_SSC_CS);
+ omap_request_gpio(_A_LCD_SSC_A0);
+
+ /* set all GPIOs to output */
+ omap_set_gpio_direction(A_LCD_SSC_RD, 0);
+ omap_set_gpio_direction(A_LCD_SSC_SD, 0);
+ omap_set_gpio_direction(_A_LCD_RESET, 0);
+ omap_set_gpio_direction(_A_LCD_SSC_CS, 0);
+ omap_set_gpio_direction(_A_LCD_SSC_A0, 0);
+
+ /* set GPIO data */
+ omap_set_gpio_dataout(A_LCD_SSC_RD, 1);
+ omap_set_gpio_dataout(A_LCD_SSC_SD, 0);
+ omap_set_gpio_dataout(_A_LCD_RESET, 0);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_A0, 1);
+}
+
+static void display_init(void)
+{
+ int i;
+
+ omap_cfg_reg(MCBSP3_CLKX);
+
+ mdelay(2);
+ setup_GPIO();
+ mdelay(2);
+
+ /* reset LCD */
+ omap_set_gpio_dataout(A_LCD_SSC_SD, 1);
+ epson_sendbyte(0, 0x25);
+
+ omap_set_gpio_dataout(_A_LCD_RESET, 0);
+ mdelay(10);
+ omap_set_gpio_dataout(_A_LCD_RESET, 1);
+
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ mdelay(2);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD, phase 1 */
+ epson_sendbyte(0, 0xCA);
+ for (i = 0; i < 10; i++)
+ epson_sendbyte(1, INIT_1[i]);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 2 */
+ epson_sendbyte(0, 0xCB);
+ for (i = 0; i < 125; i++)
+ epson_sendbyte(1, INIT_2[i]);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 2a */
+ epson_sendbyte(0, 0xCC);
+ for (i = 0; i < 14; i++)
+ epson_sendbyte(1, INIT_3[i]);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 3 */
+ epson_sendbyte(0, 0xBC);
+ epson_sendbyte(1, 0x08);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 4 */
+ epson_sendbyte(0, 0x07);
+ epson_sendbyte(1, 0x05);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 5 */
+ epson_sendbyte(0, 0x94);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 6 */
+ epson_sendbyte(0, 0xC6);
+ epson_sendbyte(1, 0x80);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ mdelay(100); /* used to be 1000 */
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 7 */
+ epson_sendbyte(0, 0x16);
+ epson_sendbyte(1, 0x02);
+ epson_sendbyte(1, 0x00);
+ epson_sendbyte(1, 0xB1);
+ epson_sendbyte(1, 0x00);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 8 */
+ epson_sendbyte(0, 0x76);
+ epson_sendbyte(1, 0x00);
+ epson_sendbyte(1, 0x00);
+ epson_sendbyte(1, 0xDB);
+ epson_sendbyte(1, 0x00);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 9 */
+ epson_sendbyte(0, 0xAF);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+}
+
+static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
+{
+ return 0;
+}
+
+static void sx1_panel_cleanup(struct lcd_panel *panel)
+{
+}
+
+static void sx1_panel_disable(struct lcd_panel *panel)
+{
+ printk(KERN_INFO "SX1: LCD panel disable\n");
+ sx1_setmmipower(0);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+
+ epson_sendbyte(0, 0x25);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ epson_sendbyte(0, 0xAE);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ mdelay(100);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ epson_sendbyte(0, 0x95);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+}
+
+static int sx1_panel_enable(struct lcd_panel *panel)
+{
+ printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
+ init_system();
+ display_init();
+
+ sx1_setmmipower(1);
+ sx1_setbacklight(0x18);
+ sx1_setkeylight (0x06);
+ return 0;
+}
+
+
+static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
+{
+ return 0;
+}
+
+struct lcd_panel sx1_panel = {
+ .name = "sx1",
+ .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
+ OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
+ OMAP_LCDC_INV_OUTPUT_EN,
+
+ .x_res = 176,
+ .y_res = 220,
+ .data_lines = 16,
+ .bpp = 16,
+ .hsw = 5,
+ .hfp = 5,
+ .hbp = 5,
+ .vsw = 2,
+ .vfp = 1,
+ .vbp = 1,
+ .pixel_clock = 1500,
+
+ .init = sx1_panel_init,
+ .cleanup = sx1_panel_cleanup,
+ .enable = sx1_panel_enable,
+ .disable = sx1_panel_disable,
+ .get_caps = sx1_panel_get_caps,
+};
+
+static int sx1_panel_probe(struct platform_device *pdev)
+{
+ omapfb_register_panel(&sx1_panel);
+ return 0;
+}
+
+static int sx1_panel_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ return 0;
+}
+
+static int sx1_panel_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+
+struct platform_driver sx1_panel_driver = {
+ .probe = sx1_panel_probe,
+ .remove = sx1_panel_remove,
+ .suspend = sx1_panel_suspend,
+ .resume = sx1_panel_resume,
+ .driver = {
+ .name = "lcd_sx1",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int sx1_panel_drv_init(void)
+{
+ return platform_driver_register(&sx1_panel_driver);
+}
+
+static void sx1_panel_drv_cleanup(void)
+{
+ platform_driver_unregister(&sx1_panel_driver);
+}
+
+module_init(sx1_panel_drv_init);
+module_exit(sx1_panel_drv_cleanup);