[ALSA] ca0106 - Code clean up
Modules: CA0106 driver
Clean up snd-ca0106 driver code:
- Fix spaces and indents
- Remove unnecessary spinlocks
- Clean up the mixer callbacks using private_value
- Clean up mixer constructors using an array
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index a89eed2..0120c46 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -207,7 +207,8 @@
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP_VALID),
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
- .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000,
+ .rates = (SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_192000),
.rate_min = 48000,
.rate_max = 192000,
.channels_min = 2, //1,
@@ -226,7 +227,8 @@
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP_VALID),
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
- .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000,
+ .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000),
.rate_min = 44100,
.rate_max = 192000,
.channels_min = 2,
@@ -276,11 +278,10 @@
u32 value)
{
u32 tmp;
- int timeout=0;
+ int timeout = 0;
int status;
int retry;
- if ((reg > 0x7f) || (value > 0x1ff))
- {
+ if ((reg > 0x7f) || (value > 0x1ff)) {
snd_printk(KERN_ERR "i2c_write: invalid values.\n");
return -EINVAL;
}
@@ -292,8 +293,7 @@
/* This controls the I2C connected to the WM8775 ADC Codec */
snd_ca0106_ptr_write(emu, I2C_D1, 0, tmp);
- for(retry=0;retry<10;retry++)
- {
+ for (retry = 0; retry < 10; retry++) {
/* Send the data to i2c */
tmp = snd_ca0106_ptr_read(emu, I2C_A, 0);
tmp = tmp & ~(I2C_A_ADC_READ|I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD_MASK);
@@ -301,24 +301,22 @@
snd_ca0106_ptr_write(emu, I2C_A, 0, tmp);
/* Wait till the transaction ends */
- while(1)
- {
+ while (1) {
status = snd_ca0106_ptr_read(emu, I2C_A, 0);
//snd_printk("I2C:status=0x%x\n", status);
timeout++;
- if((status & I2C_A_ADC_START)==0)
+ if ((status & I2C_A_ADC_START) == 0)
break;
- if(timeout>1000)
+ if (timeout > 1000)
break;
}
//Read back and see if the transaction is successful
- if((status & I2C_A_ADC_ABORT)==0)
+ if ((status & I2C_A_ADC_ABORT) == 0)
break;
}
- if(retry==10)
- {
+ if (retry == 10) {
snd_printk(KERN_ERR "Writing to ADC failed!\n");
return -EINVAL;
}
@@ -380,10 +378,10 @@
channel->emu = chip;
channel->number = channel_id;
- channel->use=1;
+ channel->use = 1;
//printk("open:channel_id=%d, chip=%p, channel=%p\n",channel_id, chip, channel);
//channel->interrupt = snd_ca0106_pcm_channel_interrupt;
- channel->epcm=epcm;
+ channel->epcm = epcm;
if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
return err;
if ((err = snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 64)) < 0)
@@ -448,10 +446,10 @@
channel->emu = chip;
channel->number = channel_id;
- channel->use=1;
+ channel->use = 1;
//printk("open:channel_id=%d, chip=%p, channel=%p\n",channel_id, chip, channel);
//channel->interrupt = snd_ca0106_pcm_channel_interrupt;
- channel->epcm=epcm;
+ channel->epcm = epcm;
if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
return err;
//snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, &hw_constraints_capture_period_sizes);
@@ -593,8 +591,8 @@
/* FIXME: Check emu->buffer.size before actually writing to it. */
for(i=0; i < runtime->periods; i++) {
- table_base[i*2]=runtime->dma_addr+(i*period_size_bytes);
- table_base[(i*2)+1]=period_size_bytes<<16;
+ table_base[i*2] = runtime->dma_addr + (i * period_size_bytes);
+ table_base[i*2+1] = period_size_bytes << 16;
}
snd_ca0106_ptr_write(emu, PLAYBACK_LIST_ADDR, channel, emu->buffer.addr+(8*16*channel));
@@ -1008,13 +1006,8 @@
unsigned int stat76;
ca0106_channel_t *pchannel;
- spin_lock(&chip->emu_lock);
-
status = inl(chip->port + IPR);
- // call updater, unlock before it
- spin_unlock(&chip->emu_lock);
-
if (! status)
return IRQ_NONE;
@@ -1024,11 +1017,11 @@
mask = 0x11; /* 0x1 for one half, 0x10 for the other half period. */
for(i = 0; i < 4; i++) {
pchannel = &(chip->playback_channels[i]);
- if(stat76 & mask) {
+ if (stat76 & mask) {
/* FIXME: Select the correct substream for period elapsed */
if(pchannel->use) {
- snd_pcm_period_elapsed(pchannel->epcm->substream);
- //printk(KERN_INFO "interrupt [%d] used\n", i);
+ snd_pcm_period_elapsed(pchannel->epcm->substream);
+ //printk(KERN_INFO "interrupt [%d] used\n", i);
}
}
//printk(KERN_INFO "channel=%p\n",pchannel);
@@ -1038,11 +1031,11 @@
mask = 0x110000; /* 0x1 for one half, 0x10 for the other half period. */
for(i = 0; i < 4; i++) {
pchannel = &(chip->capture_channels[i]);
- if(stat76 & mask) {
+ if (stat76 & mask) {
/* FIXME: Select the correct substream for period elapsed */
if(pchannel->use) {
- snd_pcm_period_elapsed(pchannel->epcm->substream);
- //printk(KERN_INFO "interrupt [%d] used\n", i);
+ snd_pcm_period_elapsed(pchannel->epcm->substream);
+ //printk(KERN_INFO "interrupt [%d] used\n", i);
}
}
//printk(KERN_INFO "channel=%p\n",pchannel);
@@ -1051,10 +1044,9 @@
}
snd_ca0106_ptr_write(chip, EXTENDED_INT, 0, stat76);
- spin_lock(&chip->emu_lock);
if (chip->midi.dev_id &&
- (status & (chip->midi.ipr_tx|chip->midi.ipr_rx))) {
+ (status & (chip->midi.ipr_tx|chip->midi.ipr_rx))) {
if (chip->midi.interrupt)
chip->midi.interrupt(&chip->midi, status);
else
@@ -1064,8 +1056,6 @@
// acknowledge the interrupt if necessary
outl(status, chip->port+IPR);
- spin_unlock(&chip->emu_lock);
-
return IRQ_HANDLED;
}
@@ -1202,8 +1192,9 @@
strcpy(card->driver, "CA0106");
strcpy(card->shortname, "CA0106");
- for (c=ca0106_chip_details; c->serial; c++) {
- if (c->serial == chip->serial) break;
+ for (c = ca0106_chip_details; c->serial; c++) {
+ if (c->serial == chip->serial)
+ break;
}
chip->details = c;
sprintf(card->longname, "%s at 0x%lx irq %i",
@@ -1359,7 +1350,7 @@
char *name;
int err;
- if(channel==CA0106_MIDI_CHAN_B) {
+ if (channel == CA0106_MIDI_CHAN_B) {
name = "CA0106 MPU-401 (UART) B";
midi = &chip->midi2;
midi->tx_enable = INTE_MIDI_TX_B;
@@ -1499,12 +1490,7 @@
// initialization of the module
static int __init alsa_card_ca0106_init(void)
{
- int err;
-
- if ((err = pci_register_driver(&driver)) > 0)
- return err;
-
- return 0;
+ return pci_register_driver(&driver);
}
// clean up the module