fsl_pq_mdio: Clean up tbi address configuration
The code for setting the address of the internal TBI PHY was
convoluted enough without a maze of ifdefs. Clean it up a bit
so we allow the logic to fail down to -ENODEV at the end of
the if/else ladder, rather than using ifdefs to repeat the same
failure code over and over.
Also, remove the support for the auto-configuration. I'm not aware of
anyone using it, and it ends up using the bus mutex before it's been
initialized.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
index 52f4e8a..4d9f84b 100644
--- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c
+++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
@@ -183,28 +183,10 @@
}
EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name);
-/* Scan the bus in reverse, looking for an empty spot */
-static int fsl_pq_mdio_find_free(struct mii_bus *new_bus)
-{
- int i;
- for (i = PHY_MAX_ADDR; i > 0; i--) {
- u32 phy_id;
-
- if (get_phy_id(new_bus, i, &phy_id))
- return -1;
-
- if (phy_id == 0xffffffff)
- break;
- }
-
- return i;
-}
-
-
-#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np)
{
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
struct gfar __iomem *enet_regs;
/*
@@ -220,15 +202,15 @@
} else if (of_device_is_compatible(np, "fsl,etsec2-mdio") ||
of_device_is_compatible(np, "fsl,etsec2-tbi")) {
return of_iomap(np, 1);
- } else
- return NULL;
-}
+ }
#endif
+ return NULL;
+}
-#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
{
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
struct device_node *np = NULL;
int err = 0;
@@ -261,9 +243,10 @@
return err;
else
return -EINVAL;
-}
+#else
+ return -ENODEV;
#endif
-
+}
static int fsl_pq_mdio_probe(struct platform_device *ofdev)
{
@@ -339,19 +322,13 @@
of_device_is_compatible(np, "fsl,etsec2-mdio") ||
of_device_is_compatible(np, "fsl,etsec2-tbi") ||
of_device_is_compatible(np, "gianfar")) {
-#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
tbipa = get_gfar_tbipa(regs, np);
if (!tbipa) {
err = -EINVAL;
goto err_free_irqs;
}
-#else
- err = -ENODEV;
- goto err_free_irqs;
-#endif
} else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
of_device_is_compatible(np, "ucc_geth_phy")) {
-#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
u32 id;
static u32 mii_mng_master;
@@ -364,10 +341,6 @@
mii_mng_master = id;
ucc_set_qe_mux_mii_mng(id - 1);
}
-#else
- err = -ENODEV;
- goto err_free_irqs;
-#endif
} else {
err = -ENODEV;
goto err_free_irqs;
@@ -386,16 +359,6 @@
}
if (tbiaddr == -1) {
- out_be32(tbipa, 0);
-
- tbiaddr = fsl_pq_mdio_find_free(new_bus);
- }
-
- /*
- * We define TBIPA at 0 to be illegal, opting to fail for boards that
- * have PHYs at 1-31, rather than change tbipa and rescan.
- */
- if (tbiaddr == 0) {
err = -EBUSY;
goto err_free_irqs;