USB: imx_udc: Fix IMX UDC gadget bugs
Fix small bugs and add some omptimization in IMX UDC Gadget.
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 77c5d0a..9e3fe30 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -283,7 +283,7 @@
imx_flush(imx_ep);
/* Special care for ep0 */
- if (EP_NO(imx_ep)) {
+ if (!EP_NO(imx_ep)) {
temp = __raw_readl(imx_usb->base + USB_CTRL);
__raw_writel(temp | CTRL_CMDOVER | CTRL_CMDERROR, imx_usb->base + USB_CTRL);
do { } while (__raw_readl(imx_usb->base + USB_CTRL) & CTRL_CMDOVER);
@@ -301,7 +301,7 @@
break;
udelay(20);
}
- if (i == 50)
+ if (i == 100)
D_ERR(imx_usb->dev, "<%s> Non finished stall on %s\n",
__func__, imx_ep->ep.name);
}
@@ -539,10 +539,9 @@
struct imx_request *req = NULL;
int ret = 0;
- if (!list_empty(&imx_ep->queue))
+ if (!list_empty(&imx_ep->queue)) {
req = list_entry(imx_ep->queue.next, struct imx_request, queue);
- if (req) {
switch (imx_ep->imx_usb->ep0state) {
case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR */
@@ -561,6 +560,10 @@
}
}
+ else
+ D_ERR(imx_ep->imx_usb->dev, "<%s> no request on %s\n",
+ __func__, imx_ep->ep.name);
+
return ret;
}
@@ -759,7 +762,7 @@
*/
if (imx_usb->set_config && !EP_NO(imx_ep)) {
imx_usb->set_config = 0;
- D_EPX(imx_usb->dev,
+ D_ERR(imx_usb->dev,
"<%s> gadget reply set config\n", __func__);
return 0;
}
@@ -779,8 +782,6 @@
return -ESHUTDOWN;
}
- local_irq_save(flags);
-
/* Debug */
D_REQ(imx_usb->dev, "<%s> ep%d %s request for [%d] bytes\n",
__func__, EP_NO(imx_ep),
@@ -790,17 +791,18 @@
if (imx_ep->stopped) {
usb_req->status = -ESHUTDOWN;
- ret = -ESHUTDOWN;
- goto out;
+ return -ESHUTDOWN;
}
if (req->in_use) {
D_ERR(imx_usb->dev,
"<%s> refusing to queue req %p (already queued)\n",
__func__, req);
- goto out;
+ return 0;
}
+ local_irq_save(flags);
+
usb_req->status = -EINPROGRESS;
usb_req->actual = 0;
@@ -810,7 +812,7 @@
ret = handle_ep0(imx_ep);
else
ret = handle_ep(imx_ep);
-out:
+
local_irq_restore(flags);
return ret;
}
@@ -1010,10 +1012,8 @@
dump_usb_stat(__func__, imx_usb);
}
- if (!imx_usb->driver) {
- /*imx_udc_disable(imx_usb);*/
+ if (!imx_usb->driver)
goto end_irq;
- }
if (intr & INTR_WAKEUP) {
if (imx_usb->gadget.speed == USB_SPEED_UNKNOWN
@@ -1095,6 +1095,11 @@
}
if (intr & INTR_SOF) {
+ /* Copy from Freescale BSP.
+ We must enable SOF intr and set CMDOVER.
+ Datasheet don't specifiy this action, but it
+ is done in Freescale BSP, so just copy it.
+ */
if (imx_usb->ep0state == EP0_IDLE) {
temp = __raw_readl(imx_usb->base + USB_CTRL);
__raw_writel(temp | CTRL_CMDOVER, imx_usb->base + USB_CTRL);
diff --git a/drivers/usb/gadget/imx_udc.h b/drivers/usb/gadget/imx_udc.h
index 8500769..d1dfb2d 100644
--- a/drivers/usb/gadget/imx_udc.h
+++ b/drivers/usb/gadget/imx_udc.h
@@ -170,7 +170,7 @@
/* #define DEBUG_IRQ */
/* #define DEBUG_EPIRQ */
/* #define DEBUG_DUMP */
-#define DEBUG_ERR
+/* #define DEBUG_ERR */
#ifdef DEBUG_REQ
#define D_REQ(dev, args...) dev_dbg(dev, ## args)