arcnet: Add com9026.h to standardize COM9026_REG_<foo>
Deduplicate the COM9026 registers.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
diff --git a/drivers/net/arcnet/arc-rimi.c b/drivers/net/arcnet/arc-rimi.c
index 4c35a7e..a07e249 100644
--- a/drivers/net/arcnet/arc-rimi.c
+++ b/drivers/net/arcnet/arc-rimi.c
@@ -39,6 +39,7 @@
#include <linux/io.h>
#include "arcdevice.h"
+#include "com9026.h"
/* Internal function declarations */
@@ -59,18 +60,6 @@
#define BUFFER_SIZE (512)
#define MIRROR_SIZE (BUFFER_SIZE * 4)
-/* COM 9026 controller chip --> ARCnet register addresses */
-#define COM9026_REG_W_INTMASK 0 /* writable */
-#define COM9026_REG_R_STATUS 0 /* readable */
-#define COM9026_REG_W_COMMAND 1 /* writable, returns random vals on read (?) */
-#define COM9026_REG_RW_CONFIG 2 /* Configuration register */
-#define COM9026_REG_R_RESET 8 /* software reset (on read) */
-#define COM9026_REG_RW_MEMDATA 12 /* Data port for IO-mapped memory */
-#define COM9026_REG_W_ADDR_LO 14 /* Control registers for said */
-#define COM9026_REG_W_ADDR_HI 15
-
-#define COM9026_REG_R_STATION 1 /* Station ID */
-
/* We cannot probe for a RIM I card; one reason is I don't know how to reset
* them. In fact, we can't even get their node ID automatically. So, we
* need to be passed a specific shmem address, IRQ, and node ID.
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index bcfdd91..2158e98 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -53,6 +53,7 @@
#include <linux/jiffies.h>
#include "arcdevice.h"
+#include "com9026.h"
/* "do nothing" functions for protocol drivers */
static void null_rx(struct net_device *dev, int bufnum,
diff --git a/drivers/net/arcnet/com9026.h b/drivers/net/arcnet/com9026.h
new file mode 100644
index 0000000..efcaf67
--- /dev/null
+++ b/drivers/net/arcnet/com9026.h
@@ -0,0 +1,17 @@
+#ifndef __COM9026_H
+#define __COM9026_H
+
+/* COM 9026 controller chip --> ARCnet register addresses */
+
+#define COM9026_REG_W_INTMASK 0 /* writable */
+#define COM9026_REG_R_STATUS 0 /* readable */
+#define COM9026_REG_W_COMMAND 1 /* writable, returns random vals on read (?) */
+#define COM9026_REG_RW_CONFIG 2 /* Configuration register */
+#define COM9026_REG_R_RESET 8 /* software reset (on read) */
+#define COM9026_REG_RW_MEMDATA 12 /* Data port for IO-mapped memory */
+#define COM9026_REG_W_ADDR_LO 14 /* Control registers for said */
+#define COM9026_REG_W_ADDR_HI 15
+
+#define COM9026_REG_R_STATION 1 /* Station ID */
+
+#endif
diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c
index 7e084f1..b57863d 100644
--- a/drivers/net/arcnet/com90io.c
+++ b/drivers/net/arcnet/com90io.c
@@ -40,6 +40,7 @@
#include <linux/io.h>
#include "arcdevice.h"
+#include "com9026.h"
/* Internal function declarations */
@@ -58,16 +59,6 @@
/* The number of low I/O ports used by the card. */
#define ARCNET_TOTAL_SIZE 16
-/* COM 9026 controller chip --> ARCnet register addresses */
-#define COM9026_REG_W_INTMASK 0 /* writable */
-#define COM9026_REG_R_STATUS 0 /* readable */
-#define COM9026_REG_W_COMMAND 1 /* writable, returns random vals on read (?) */
-#define COM9026_REG_RW_CONFIG 2 /* Configuration register */
-#define COM9026_REG_R_RESET 8 /* software reset (on read) */
-#define COM9026_REG_RW_MEMDATA 12 /* Data port for IO-mapped memory */
-#define COM9026_REG_W_ADDR_LO 14 /* Control registers for said */
-#define COM9026_REG_W_ADDR_HI 15
-
/****************************************************************************
* *
* IO-mapped operation routines *
diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c
index a97d086..0d9b45f 100644
--- a/drivers/net/arcnet/com90xx.c
+++ b/drivers/net/arcnet/com90xx.c
@@ -38,6 +38,7 @@
#include <linux/io.h>
#include "arcdevice.h"
+#include "com9026.h"
/* Define this to speed up the autoprobe by assuming if only one io port and
* shmem are left in the list at Stage 5, they must correspond to each
@@ -78,18 +79,6 @@
#define BUFFER_SIZE (512)
#define MIRROR_SIZE (BUFFER_SIZE * 4)
-/* COM 9026 controller chip --> ARCnet register addresses */
-#define COM9026_REG_W_INTMASK 0 /* writable */
-#define COM9026_REG_R_STATUS 0 /* readable */
-#define COM9026_REG_W_COMMAND 1 /* writable, returns random vals on read (?) */
-#define COM9026_REG_RW_CONFIG 2 /* Configuration register */
-#define COM9026_REG_R_RESET 8 /* software reset (on read) */
-#define COM9026_REG_RW_MEMDATA 12 /* Data port for IO-mapped memory */
-#define COM9026_REG_W_ADDR_LO 14 /* Control registers for said */
-#define COM9026_REG_W_ADDR_HI 15
-
-#define COM9026_REG_R_STATION 1 /* Station ID */
-
static int com90xx_skip_probe __initdata = 0;
/* Module parameters */