regulator: mc13892: Simplify implementation of mc13892_sw_regulator_set_voltage_sel()
Use mc13xxx_reg_rmw rather than a mc13xxx_reg_read and a mc13xxx_reg_write calls.
This logic to set MC13892_SWITCHERS0_SWxHI bit is pretty simple:
if (volt > 1375000)
set MC13892_SWITCHERS0_SWxHI bit
else if (volt < 1100000)
clear MC13892_SWITCHERS0_SWxHI bit
else
leave MC13892_SWITCHERS0_SWxHI bit untouched
We already know the selector, so we don't need to calculate the selector again.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c
index 9d4296b..5d1d487 100644
--- a/drivers/regulator/mc13892-regulator.c
+++ b/drivers/regulator/mc13892-regulator.c
@@ -426,37 +426,25 @@
unsigned selector)
{
struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
- int hi, value, mask, id = rdev_get_id(rdev);
- u32 valread;
+ int volt, mask, id = rdev_get_id(rdev);
+ u32 reg_value;
int ret;
- value = rdev->desc->volt_table[selector];
+ volt = rdev->desc->volt_table[selector];
+ mask = mc13892_regulators[id].vsel_mask;
+ reg_value = selector << mc13892_regulators[id].vsel_shift;
+
+ if (volt > 1375000) {
+ mask |= MC13892_SWITCHERS0_SWxHI;
+ reg_value |= MC13892_SWITCHERS0_SWxHI;
+ } else if (volt < 1100000) {
+ mask |= MC13892_SWITCHERS0_SWxHI;
+ reg_value &= ~MC13892_SWITCHERS0_SWxHI;
+ }
mc13xxx_lock(priv->mc13xxx);
- ret = mc13xxx_reg_read(priv->mc13xxx,
- mc13892_regulators[id].vsel_reg, &valread);
- if (ret)
- goto err;
-
- if (value > 1375000)
- hi = 1;
- else if (value < 1100000)
- hi = 0;
- else
- hi = valread & MC13892_SWITCHERS0_SWxHI;
-
- if (hi) {
- value = (value - 1100000) / 25000;
- value |= MC13892_SWITCHERS0_SWxHI;
- } else
- value = (value - 600000) / 25000;
-
- mask = mc13892_regulators[id].vsel_mask | MC13892_SWITCHERS0_SWxHI;
- valread = (valread & ~mask) |
- (value << mc13892_regulators[id].vsel_shift);
- ret = mc13xxx_reg_write(priv->mc13xxx, mc13892_regulators[id].vsel_reg,
- valread);
-err:
+ ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].reg, mask,
+ reg_value);
mc13xxx_unlock(priv->mc13xxx);
return ret;