ASoC: tas2552: Correct PDM configuration register bit definitions
The PDM clock can be selected via bit0-1.
PDM_DATA_ES bit is at bit2.
The code were trying to select BCLK as PDM reference clock but instead
it was selecting PLL and set the DATA_ES bit to 1.
Selecting the PLL output as reference clock as default does make sense,
but the driver should not change the PDM data edge.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/codecs/tas2552.c b/sound/soc/codecs/tas2552.c
index 9954bd4..07a0ec0 100644
--- a/sound/soc/codecs/tas2552.c
+++ b/sound/soc/codecs/tas2552.c
@@ -376,7 +376,7 @@
TAS2552_DIN_SRC_SEL_AVG_L_R | TAS2552_88_96KHZ);
snd_soc_write(codec, TAS2552_DOUT, TAS2552_PDM_DATA_I);
snd_soc_write(codec, TAS2552_OUTPUT_DATA, TAS2552_PDM_DATA_V_I | 0x8);
- snd_soc_write(codec, TAS2552_PDM_CFG, TAS2552_PDM_BCLK_SEL);
+ snd_soc_write(codec, TAS2552_PDM_CFG, TAS2552_PDM_CLK_SEL_PLL);
snd_soc_write(codec, TAS2552_BOOST_PT_CTRL, TAS2552_APT_DELAY_200 |
TAS2552_APT_THRESH_2_1_7);
diff --git a/sound/soc/codecs/tas2552.h b/sound/soc/codecs/tas2552.h
index 6cea8f3..938d90f 100644
--- a/sound/soc/codecs/tas2552.h
+++ b/sound/soc/codecs/tas2552.h
@@ -99,12 +99,12 @@
#define TAS2552_PDM_DATA_V_I (0x11 << 6)
/* PDM CFG Register */
-#define TAS2552_PDM_DATA_ES_RISE 0x4
-
-#define TAS2552_PDM_PLL_CLK_SEL 0x00
-#define TAS2552_PDM_IV_CLK_SEL (1 << 1)
-#define TAS2552_PDM_BCLK_SEL (1 << 2)
-#define TAS2552_PDM_MCLK_SEL (1 << 3)
+#define TAS2552_PDM_CLK_SEL_PLL (0x0 << 0)
+#define TAS2552_PDM_CLK_SEL_IVCLKIN (0x1 << 0)
+#define TAS2552_PDM_CLK_SEL_BCLK (0x2 << 0)
+#define TAS2552_PDM_CLK_SEL_MCLK (0x3 << 0)
+#define TAS2552_PDM_CLK_SEL_MASK TAS2552_PDM_CLK_SEL_MCLK
+#define TAS2552_PDM_DATA_ES (1 << 2)
/* Boost pass-through register */
#define TAS2552_APT_DELAY_50 0x00