diff --git a/arch/tile/include/arch/mpipe.h b/arch/tile/include/arch/mpipe.h
index 8a33912..904538e 100644
--- a/arch/tile/include/arch/mpipe.h
+++ b/arch/tile/include/arch/mpipe.h
@@ -176,7 +176,18 @@
      */
     uint_reg_t stack_idx    : 5;
     /* Reserved. */
-    uint_reg_t __reserved_2 : 5;
+    uint_reg_t __reserved_2 : 3;
+    /*
+     * Instance ID.  For devices that support automatic buffer return between
+     * mPIPE instances, this field indicates the buffer owner.  If the INST
+     * field does not match the mPIPE's instance number when a packet is
+     * egressed, buffers with HWB set will be returned to the other mPIPE
+     * instance.  Note that not all devices support multi-mPIPE buffer
+     * return.  The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates
+     * whether the INST field in the buffer descriptor is populated by iDMA
+     * hardware. This field is ignored on writes.
+     */
+    uint_reg_t inst         : 2;
     /*
      * Reads as one to indicate that this is a hardware managed buffer.
      * Ignored on writes since all buffers on a given stack are the same size.
@@ -205,7 +216,8 @@
     uint_reg_t c            : 2;
     uint_reg_t size         : 3;
     uint_reg_t hwb          : 1;
-    uint_reg_t __reserved_2 : 5;
+    uint_reg_t inst         : 2;
+    uint_reg_t __reserved_2 : 3;
     uint_reg_t stack_idx    : 5;
     uint_reg_t __reserved_1 : 6;
     int_reg_t va           : 35;
@@ -231,9 +243,9 @@
     /* Reserved. */
     uint_reg_t __reserved_0 : 3;
     /* eDMA ring being accessed */
-    uint_reg_t ring         : 5;
+    uint_reg_t ring         : 6;
     /* Reserved. */
-    uint_reg_t __reserved_1 : 18;
+    uint_reg_t __reserved_1 : 17;
     /*
      * This field of the address selects the region (address space) to be
      * accessed.  For the egress DMA post region, this field must be 5.
@@ -250,8 +262,8 @@
     uint_reg_t svc_dom      : 5;
     uint_reg_t __reserved_2 : 6;
     uint_reg_t region       : 3;
-    uint_reg_t __reserved_1 : 18;
-    uint_reg_t ring         : 5;
+    uint_reg_t __reserved_1 : 17;
+    uint_reg_t ring         : 6;
     uint_reg_t __reserved_0 : 3;
 #endif
   };
diff --git a/arch/tile/include/arch/mpipe_constants.h b/arch/tile/include/arch/mpipe_constants.h
index 410a040..84022ac5 100644
--- a/arch/tile/include/arch/mpipe_constants.h
+++ b/arch/tile/include/arch/mpipe_constants.h
@@ -16,13 +16,13 @@
 #ifndef __ARCH_MPIPE_CONSTANTS_H__
 #define __ARCH_MPIPE_CONSTANTS_H__
 
-#define MPIPE_NUM_CLASSIFIERS 10
+#define MPIPE_NUM_CLASSIFIERS 16
 #define MPIPE_CLS_MHZ 1200
 
-#define MPIPE_NUM_EDMA_RINGS 32
+#define MPIPE_NUM_EDMA_RINGS 64
 
 #define MPIPE_NUM_SGMII_MACS 16
-#define MPIPE_NUM_XAUI_MACS 4
+#define MPIPE_NUM_XAUI_MACS 16
 #define MPIPE_NUM_LOOPBACK_CHANNELS 4
 #define MPIPE_NUM_NON_LB_CHANNELS 28
 
diff --git a/arch/tile/include/arch/mpipe_shm.h b/arch/tile/include/arch/mpipe_shm.h
index f2e9e12..13b3c43 100644
--- a/arch/tile/include/arch/mpipe_shm.h
+++ b/arch/tile/include/arch/mpipe_shm.h
@@ -44,8 +44,14 @@
      * descriptors toggles each time the ring tail pointer wraps.
      */
     uint_reg_t gen        : 1;
+    /**
+     * For devices with EDMA reorder support, this field allows the
+     * descriptor to select the egress FIFO.  The associated DMA ring must
+     * have ALLOW_EFIFO_SEL enabled.
+     */
+    uint_reg_t efifo_sel  : 6;
     /** Reserved.  Must be zero. */
-    uint_reg_t r0         : 7;
+    uint_reg_t r0         : 1;
     /** Checksum generation enabled for this transfer. */
     uint_reg_t csum       : 1;
     /**
@@ -110,7 +116,8 @@
     uint_reg_t notif      : 1;
     uint_reg_t ns         : 1;
     uint_reg_t csum       : 1;
-    uint_reg_t r0         : 7;
+    uint_reg_t r0         : 1;
+    uint_reg_t efifo_sel  : 6;
     uint_reg_t gen        : 1;
 #endif
 
@@ -126,14 +133,16 @@
     /** Reserved. */
     uint_reg_t __reserved_1 : 3;
     /**
-     * Instance ID.  For devices that support more than one mPIPE instance,
-     * this field indicates the buffer owner.  If the INST field does not
-     * match the mPIPE's instance number when a packet is egressed, buffers
-     * with HWB set will be returned to the other mPIPE instance.
+     * Instance ID.  For devices that support automatic buffer return between
+     * mPIPE instances, this field indicates the buffer owner.  If the INST
+     * field does not match the mPIPE's instance number when a packet is
+     * egressed, buffers with HWB set will be returned to the other mPIPE
+     * instance.  Note that not all devices support multi-mPIPE buffer
+     * return.  The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates
+     * whether the INST field in the buffer descriptor is populated by iDMA
+     * hardware.
      */
-    uint_reg_t inst         : 1;
-    /** Reserved. */
-    uint_reg_t __reserved_2 : 1;
+    uint_reg_t inst         : 2;
     /**
      * Always set to one by hardware in iDMA packet descriptors.  For eDMA,
      * indicates whether the buffer will be released to the buffer stack
@@ -166,8 +175,7 @@
     uint_reg_t c            : 2;
     uint_reg_t size         : 3;
     uint_reg_t hwb          : 1;
-    uint_reg_t __reserved_2 : 1;
-    uint_reg_t inst         : 1;
+    uint_reg_t inst         : 2;
     uint_reg_t __reserved_1 : 3;
     uint_reg_t stack_idx    : 5;
     uint_reg_t __reserved_0 : 6;
@@ -408,7 +416,10 @@
     /**
      * Sequence number applied when packet is distributed.   Classifier
      * selects which sequence number is to be applied by writing the 13-bit
-     * SQN-selector into this field.
+     * SQN-selector into this field.  For devices that support EXT_SQN (as
+     * indicated in IDMA_INFO.EXT_SQN_SUPPORT), the GP_SQN can be extended to
+     * 32-bits via the IDMA_CTL.EXT_SQN register.  In this case the
+     * PACKET_SQN will be reduced to 32 bits.
      */
     uint_reg_t gp_sqn     : 16;
     /**
@@ -451,14 +462,16 @@
     /** Reserved. */
     uint_reg_t __reserved_5 : 3;
     /**
-     * Instance ID.  For devices that support more than one mPIPE instance,
-     * this field indicates the buffer owner.  If the INST field does not
-     * match the mPIPE's instance number when a packet is egressed, buffers
-     * with HWB set will be returned to the other mPIPE instance.
+     * Instance ID.  For devices that support automatic buffer return between
+     * mPIPE instances, this field indicates the buffer owner.  If the INST
+     * field does not match the mPIPE's instance number when a packet is
+     * egressed, buffers with HWB set will be returned to the other mPIPE
+     * instance.  Note that not all devices support multi-mPIPE buffer
+     * return.  The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates
+     * whether the INST field in the buffer descriptor is populated by iDMA
+     * hardware.
      */
-    uint_reg_t inst         : 1;
-    /** Reserved. */
-    uint_reg_t __reserved_6 : 1;
+    uint_reg_t inst         : 2;
     /**
      * Always set to one by hardware in iDMA packet descriptors.  For eDMA,
      * indicates whether the buffer will be released to the buffer stack
@@ -491,8 +504,7 @@
     uint_reg_t c            : 2;
     uint_reg_t size         : 3;
     uint_reg_t hwb          : 1;
-    uint_reg_t __reserved_6 : 1;
-    uint_reg_t inst         : 1;
+    uint_reg_t inst         : 2;
     uint_reg_t __reserved_5 : 3;
     uint_reg_t stack_idx    : 5;
     uint_reg_t __reserved_4 : 6;
diff --git a/arch/tile/include/arch/trio_constants.h b/arch/tile/include/arch/trio_constants.h
index 628b045..85647e9 100644
--- a/arch/tile/include/arch/trio_constants.h
+++ b/arch/tile/include/arch/trio_constants.h
@@ -16,21 +16,21 @@
 #ifndef __ARCH_TRIO_CONSTANTS_H__
 #define __ARCH_TRIO_CONSTANTS_H__
 
-#define TRIO_NUM_ASIDS 16
+#define TRIO_NUM_ASIDS 32
 #define TRIO_NUM_TLBS_PER_ASID 16
 
 #define TRIO_NUM_TPIO_REGIONS 8
 #define TRIO_LOG2_NUM_TPIO_REGIONS 3
 
-#define TRIO_NUM_MAP_MEM_REGIONS 16
-#define TRIO_LOG2_NUM_MAP_MEM_REGIONS 4
+#define TRIO_NUM_MAP_MEM_REGIONS 32
+#define TRIO_LOG2_NUM_MAP_MEM_REGIONS 5
 #define TRIO_NUM_MAP_SQ_REGIONS 8
 #define TRIO_LOG2_NUM_MAP_SQ_REGIONS 3
 
 #define TRIO_LOG2_NUM_SQ_FIFO_ENTRIES 6
 
-#define TRIO_NUM_PUSH_DMA_RINGS 32
+#define TRIO_NUM_PUSH_DMA_RINGS 64
 
-#define TRIO_NUM_PULL_DMA_RINGS 32
+#define TRIO_NUM_PULL_DMA_RINGS 64
 
 #endif /* __ARCH_TRIO_CONSTANTS_H__ */