defxx: Add missing DMA synchronisation calls
This adds DMA synchronisation calls needed in the receive path:
1. To retrieve the Receive Status word that is prepended by the PDQ DMA
engine in the receive buffer, and provides information about the
frame received, including its size and any errors.
2. To make data received available for copying in the small-frame case
(size <= SKBUFF_RX_COPYBREAK) where the original DMA buffer will be
returned to the receive descriptor ring and therefore its mapping
retained.
With DMA mapping error handling in place, added by the other patch,
this may now also trigger where an attempt to map a newly allocated
buffer for DMA has failed. In that case data from the original buffer
will be copied out and the buffer returned to the DMA descriptor ring.
These calls may do nothing when data is in the host DMA addressing range
of the FDDI interface, such as always on 32-bit systems, however their
absence makes frame reception stop functioning reliably on systems that
have memory beyond the low 4GB of the address space.
Reported-by: Robert Coerver <Robert.Coerver@ll.mit.edu>
Tested-by: Robert Coerver <Robert.Coerver@ll.mit.edu>
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
index ed23288..3d1a878 100644
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -196,6 +196,7 @@
* 14 Jun 2005 macro Use irqreturn_t.
* 23 Oct 2006 macro Big-endian host support.
* 14 Dec 2006 macro TURBOchannel support.
+ * 01 Jul 2014 macro Fixes for DMA on 64-bit hosts.
*/
/* Include files */
@@ -224,8 +225,8 @@
/* Version information string should be updated prior to each new release! */
#define DRV_NAME "defxx"
-#define DRV_VERSION "v1.10"
-#define DRV_RELDATE "2006/12/14"
+#define DRV_VERSION "v1.11"
+#define DRV_RELDATE "2014/07/01"
static char version[] =
DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
@@ -3026,7 +3027,7 @@
while (bp->rcv_xmt_reg.index.rcv_comp != p_type_2_cons->index.rcv_cons)
{
/* Process any errors */
-
+ dma_addr_t dma_addr;
int entry;
entry = bp->rcv_xmt_reg.index.rcv_comp;
@@ -3035,6 +3036,11 @@
#else
p_buff = bp->p_rcv_buff_va[entry];
#endif
+ dma_addr = bp->descr_block_virt->rcv_data[entry].long_1;
+ dma_sync_single_for_cpu(bp->bus_dev,
+ dma_addr + RCV_BUFF_K_DESCR,
+ sizeof(u32),
+ DMA_FROM_DEVICE);
memcpy(&descr, p_buff + RCV_BUFF_K_DESCR, sizeof(u32));
if (descr & PI_FMC_DESCR_M_RCC_FLUSH)
@@ -3082,7 +3088,7 @@
skb = (struct sk_buff *)bp->p_rcv_buff_va[entry];
dma_unmap_single(bp->bus_dev,
- bp->descr_block_virt->rcv_data[entry].long_1,
+ dma_addr,
PI_RCV_DATA_K_SIZE_MAX,
DMA_FROM_DEVICE);
skb_reserve(skb, RCV_BUFF_K_PADDING);
@@ -3108,6 +3114,12 @@
#endif
{
/* Receive buffer allocated, pass receive packet up */
+ dma_sync_single_for_cpu(
+ bp->bus_dev,
+ dma_addr +
+ RCV_BUFF_K_PADDING,
+ pkt_len + 3,
+ DMA_FROM_DEVICE);
skb_copy_to_linear_data(skb,
p_buff + RCV_BUFF_K_PADDING,