trivial: Fix misspelling of firmware
Fix misspelling of firmware.
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/Documentation/ia64/kvm.txt b/Documentation/ia64/kvm.txt
index 84f7cb3..ffb5c80 100644
--- a/Documentation/ia64/kvm.txt
+++ b/Documentation/ia64/kvm.txt
@@ -42,7 +42,7 @@
hg clone http://xenbits.xensource.com/ext/efi-vfirmware.hg
you can get the firmware's binary in the directory of efi-vfirmware.hg/binaries.
- (3) Rename the firware you owned to Flash.fd, and copy it to /usr/local/share/qemu
+ (3) Rename the firmware you owned to Flash.fd, and copy it to /usr/local/share/qemu
4. Boot up Linux or Windows guests:
4.1 Create or install a image for guest boot. If you have xen experience, it should be easy.
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt
index 6c238f5..249db3a 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt
@@ -1,6 +1,6 @@
* Uploaded QE firmware
- If a new firwmare has been uploaded to the QE (usually by the
+ If a new firmware has been uploaded to the QE (usually by the
boot loader), then a 'firmware' child node should be added to the QE
node. This node provides information on the uploaded firmware that
device drivers may need.
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 5b47d6b..cbcd7eb 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -221,7 +221,7 @@
* Assumption to be fixed: we're always booted on logical / physical
* processor 0. While we're always running on logical processor 0
* this still means this is physical processor zero; it might for
- * example be disabled in the firwware.
+ * example be disabled in the firmware.
*/
alloc_cpupda(0, 0);
}
diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S
index a46c3a2..3a1b7bf 100644
--- a/arch/sparc/kernel/head_64.S
+++ b/arch/sparc/kernel/head_64.S
@@ -686,7 +686,7 @@
* point.
*
* There used to be enormous complexity wrt. transferring
- * over from the firwmare's trap table to the Linux kernel's.
+ * over from the firmware's trap table to the Linux kernel's.
* For example, there was a chicken & egg problem wrt. building
* the OBP page tables, yet needing to be on the Linux kernel
* trap table (to translate PAGE_OFFSET addresses) in order to
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 88dd2e0..ce7551e 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -2299,7 +2299,7 @@
eaddr = sc->sbm_hwaddr;
/*
- * Read the ethernet address. The firwmare left this programmed
+ * Read the ethernet address. The firmware left this programmed
* for us in the ethernet address register for each mac.
*/
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f7efcec..ed60b18 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -11225,7 +11225,7 @@
return tg3_phy_init(tp);
/* Reading the PHY ID register can conflict with ASF
- * firwmare access to the PHY hardware.
+ * firmware access to the PHY hardware.
*/
err = 0;
if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 115b704..f4e963b 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -2362,7 +2362,7 @@
i * sizeof(struct ipw2100_status));
#ifdef IPW2100_DEBUG_C3
- /* Halt the fimrware so we can get a good image */
+ /* Halt the firmware so we can get a good image */
write_register(priv->net_dev, IPW_REG_RESET_REG,
IPW_AUX_HOST_RESET_REG_STOP_MASTER);
j = 5;
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index b344994..f6174fd 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -8844,7 +8844,7 @@
#endif /* CONFIG_IPW2200_MONITOR */
/* Free the existing firmware and reset the fw_loaded
- * flag so ipw_load() will bring in the new firmawre */
+ * flag so ipw_load() will bring in the new firmware */
free_firmware();
priv->ieee->iw_mode = wrqu->mode;
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 663dc83..3889158 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1337,7 +1337,7 @@
/* api_ver should match the api version forming part of the
* firmware filename ... but we don't check for that and only rely
- * on the API version read from firware header from here on forward */
+ * on the API version read from firmware header from here on forward */
if (api_ver < api_min || api_ver > api_max) {
IWL_ERR(priv, "Driver unable to support your firmware API. "
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index a71b08c..9d5f97d 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2562,7 +2562,7 @@
/* api_ver should match the api version forming part of the
* firmware filename ... but we don't check for that and only rely
- * on the API version read from firware header from here on forward */
+ * on the API version read from firmware header from here on forward */
if (api_ver < api_min || api_ver > api_max) {
IWL_ERR(priv, "Driver unable to support your firmware API. "
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 639dd02..8c3605c 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1649,7 +1649,7 @@
/**
* @brief This function executes next command in command
- * pending queue. It will put fimware back to PS mode
+ * pending queue. It will put firmware back to PS mode
* if applicable.
*
* @param priv A pointer to struct lbs_private structure
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6d61200..dab33a2 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -550,7 +550,7 @@
* @dev: PCI device to handle.
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
*
- * Transition a device to a new power state, using the platform formware and/or
+ * Transition a device to a new power state, using the platform firmware and/or
* the device's PCI PM registers.
*
* RETURN VALUE:
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index d243320..814cb65 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -5811,7 +5811,7 @@
* ThinkPads from this same time period (and earlier) probably lack the
* tachometer as well.
*
- * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
+ * Unfortunately a lot of ThinkPads with new-style ECs but whose firmware
* was never fixed by IBM to report the EC firmware version string
* probably support the tachometer (like the early X models), so
* detecting it is quite hard. We need more data to know for sure.
diff --git a/drivers/staging/otus/hal/hpmain.c b/drivers/staging/otus/hal/hpmain.c
index 2e65c46..dab2783 100644
--- a/drivers/staging/otus/hal/hpmain.c
+++ b/drivers/staging/otus/hal/hpmain.c
@@ -152,7 +152,7 @@
else
{
#ifndef ZM_OTUS_LINUX_PHASE_2
- /* donwload the normal frimware */
+ /* download the normal firmware */
if ((ret = zfFirmwareDownload(dev, (u32_t*)zcFwImage,
(u32_t)zcFwImageSize, ZM_FIRMWARE_WLAN_ADDR)) != ZM_SUCCESS)
{
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index b6483dd..9cf9ff6 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -626,7 +626,7 @@
goto err_fw_corrupted;
/*
- * Start to upload formware : send reset
+ * Start to upload firmware : send reset
*/
value = 1;
ret = uea_send_modem_cmd(usb, F8051_USBCS, sizeof(value), &value);
diff --git a/drivers/usb/serial/ChangeLog.history b/drivers/usb/serial/ChangeLog.history
index c1b2799..f13fd48 100644
--- a/drivers/usb/serial/ChangeLog.history
+++ b/drivers/usb/serial/ChangeLog.history
@@ -715,7 +715,7 @@
0.2 (01/30/2000) greg kroah-hartman
Milestone 1 release.
- Device is found by USB subsystem, enumerated, fimware is downloaded
+ Device is found by USB subsystem, enumerated, firmware is downloaded
and the descriptors are printed to the debug log, config is set, and
green light starts to blink. Open port works, and data can be sent
and received at the default settings of the UART. Loopback connector
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 76262d8..b450a26 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -379,7 +379,7 @@
ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */
ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
not multiple of 16 bytes */
- ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firwmare update warning */
+ ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firmware update warning */
ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */
/* DMA mask for user DMA control: User visible values; DO NOT
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 4a4a206..9d1c1a0 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -265,7 +265,7 @@
* hibernation_snapshot - quiesce devices and create the hibernation
* snapshot image.
* @platform_mode - if set, use the platform driver, if available, to
- * prepare the platform frimware for the power transition.
+ * prepare the platform firmware for the power transition.
*
* Must be called with pm_mutex held
*/
@@ -378,7 +378,7 @@
* hibernation_restore - quiesce devices and restore the hibernation
* snapshot image. If successful, control returns in hibernation_snaphot()
* @platform_mode - if set, use the platform driver, if available, to
- * prepare the platform frimware for the transition.
+ * prepare the platform firmware for the transition.
*
* Must be called with pm_mutex held
*/
diff --git a/sound/oss/pss.c b/sound/oss/pss.c
index 16517a5..83f5ee2 100644
--- a/sound/oss/pss.c
+++ b/sound/oss/pss.c
@@ -46,7 +46,7 @@
* load the driver as it did in previous versions.
* 04-07-1999: Anthony Barbachan <barbcode@xmen.cis.fordham.edu>
* Added module parameter pss_firmware to allow the user to tell
- * the driver where the fireware file is located. The default
+ * the driver where the firmware file is located. The default
* setting is the previous hardcoded setting "/etc/sound/pss_synth".
* 00-03-03: Christoph Hellwig <chhellwig@infradead.org>
* Adapted to module_init/module_exit
diff --git a/sound/sh/aica.c b/sound/sh/aica.c
index f551233..583a369 100644
--- a/sound/sh/aica.c
+++ b/sound/sh/aica.c
@@ -565,7 +565,7 @@
err = request_firmware(&fw_entry, "aica_firmware.bin", &pd->dev);
if (unlikely(err))
return err;
- /* write firware into memory */
+ /* write firmware into memory */
spu_disable();
spu_memload(0, fw_entry->data, fw_entry->size);
spu_enable();