extcon: Use the extcon_set_state_sync() instead of deprecated functions
This patch alters the renamed extcon API to set the state of the external
connectors instead of deprecated extcon_set_cable_state_().
Because the patch[1] modifies the function name to maintain the function
naming pattern.
- extcon_set_cable_state_() -> extcon_set_state_sync()
- extcon_get_cable_state_() -> extcon_get_state()
[1] https://lkml.org/lkml/2016/8/4/729
- extcon: Rename the extcon_set/get_state() to maintain the function naming pattern
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Roger Quadros <rogerq@ti.com>
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index e62e6cd..bc53870 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -75,7 +75,7 @@
for (i = 0; i < data->num_conditions; i++) {
def = &data->adc_conditions[i];
if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
- extcon_set_cable_state_(data->edev, def->id, true);
+ extcon_set_state_sync(data->edev, def->id, true);
return;
}
}
@@ -83,7 +83,7 @@
/* Set the detached state if adc value is not included in the range */
for (i = 0; i < data->num_conditions; i++) {
def = &data->adc_conditions[i];
- extcon_set_cable_state_(data->edev, def->id, false);
+ extcon_set_state_sync(data->edev, def->id, false);
}
}
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 493bd9f..56e6c4c 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -614,7 +614,7 @@
}
/* If the cable was removed while measuring ignore the result */
- ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
+ ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
@@ -649,7 +649,7 @@
else
report = EXTCON_JACK_HEADPHONE;
- ret = extcon_set_cable_state_(info->edev, report, true);
+ ret = extcon_set_state_sync(info->edev, report, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report HP/line: %d\n",
ret);
@@ -732,7 +732,7 @@
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
- ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true);
+ ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
@@ -789,7 +789,7 @@
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
- ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true);
+ ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
@@ -829,7 +829,7 @@
mutex_lock(&info->lock);
/* If the cable was removed while measuring ignore the result */
- ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
+ ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
@@ -914,7 +914,7 @@
arizona_identify_headphone(info);
- ret = extcon_set_cable_state_(info->edev,
+ ret = extcon_set_state_sync(info->edev,
EXTCON_JACK_MICROPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Headset report failed: %d\n",
@@ -1108,7 +1108,7 @@
if (info->last_jackdet == present) {
dev_dbg(arizona->dev, "Detected jack\n");
- ret = extcon_set_cable_state_(info->edev,
+ ret = extcon_set_state_sync(info->edev,
EXTCON_MECHANICAL, true);
if (ret != 0)
@@ -1150,7 +1150,7 @@
input_sync(info->input);
for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) {
- ret = extcon_set_cable_state_(info->edev,
+ ret = extcon_set_state_sync(info->edev,
arizona_cable[i], false);
if (ret != 0)
dev_err(arizona->dev,
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index 04610f8..42f41e8 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -226,7 +226,7 @@
}
if (notify_charger)
- extcon_set_cable_state_(info->edev, cable, vbus_attach);
+ extcon_set_state_sync(info->edev, cable, vbus_attach);
/* Clear the flags on disconnect event */
if (!vbus_attach)
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index b1b0264..e7aebbc 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -49,7 +49,7 @@
state = gpiod_get_value_cansleep(data->id_gpiod);
if (data->pdata->gpio_active_low)
state = !state;
- extcon_set_cable_state_(data->edev, data->pdata->extcon_id, state);
+ extcon_set_state_sync(data->edev, data->pdata->extcon_id, state);
}
static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c
index a0cd652..12e26c4 100644
--- a/drivers/extcon/extcon-max14577.c
+++ b/drivers/extcon/extcon-max14577.c
@@ -357,7 +357,7 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+ extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
return 0;
}
@@ -454,24 +454,24 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
break;
case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
attached);
break;
case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
attached);
break;
case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
attached);
break;
case MAX14577_CHARGER_TYPE_SPECIAL_1A:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
attached);
break;
case MAX14577_CHARGER_TYPE_NONE:
diff --git a/drivers/extcon/extcon-max3355.c b/drivers/extcon/extcon-max3355.c
index c24abec..533e16a 100644
--- a/drivers/extcon/extcon-max3355.c
+++ b/drivers/extcon/extcon-max3355.c
@@ -39,16 +39,16 @@
* As we don't have event for USB peripheral cable attached,
* we simulate USB peripheral attach here.
*/
- extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, false);
- extcon_set_cable_state_(data->edev, EXTCON_USB, true);
+ extcon_set_state_sync(data->edev, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(data->edev, EXTCON_USB, true);
} else {
/*
* ID = 0 means USB HOST cable attached.
* As we don't have event for USB peripheral cable detached,
* we simulate USB peripheral detach here.
*/
- extcon_set_cable_state_(data->edev, EXTCON_USB, false);
- extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(data->edev, EXTCON_USB, false);
+ extcon_set_state_sync(data->edev, EXTCON_USB_HOST, true);
}
return IRQ_HANDLED;
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index f17cb76..68dbcb8 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -505,8 +505,8 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
- extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+ extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
+ extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
goto out;
case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */
dock_id = EXTCON_DOCK;
@@ -514,8 +514,8 @@
case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */
dock_id = EXTCON_DOCK;
if (!attached) {
- extcon_set_cable_state_(info->edev, EXTCON_USB, false);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_USB, false);
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
false);
}
break;
@@ -530,7 +530,7 @@
attached);
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, dock_id, attached);
+ extcon_set_state_sync(info->edev, dock_id, attached);
out:
return 0;
@@ -596,7 +596,7 @@
attached);
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+ extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX77693_MUIC_GND_AV_CABLE_LOAD:
/* Audio Video Cable with load, PATH:AUDIO */
@@ -604,14 +604,14 @@
attached);
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
break;
case MAX77693_MUIC_GND_MHL:
case MAX77693_MUIC_GND_MHL_VB:
/* MHL or MHL with USB/TA cable */
- extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+ extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
break;
default:
dev_err(info->dev, "failed to detect %s cable of gnd type\n",
@@ -653,7 +653,7 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+ extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
return 0;
}
@@ -807,10 +807,10 @@
* - Support charging through micro-usb port without
* data connection
*/
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
attached);
if (!cable_attached)
- extcon_set_cable_state_(info->edev,
+ extcon_set_state_sync(info->edev,
EXTCON_DISP_MHL, cable_attached);
break;
}
@@ -834,13 +834,13 @@
* - Support charging through micro-usb port without
* data connection.
*/
- extcon_set_cable_state_(info->edev, EXTCON_USB,
+ extcon_set_state_sync(info->edev, EXTCON_USB,
attached);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
if (!cable_attached)
- extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+ extcon_set_state_sync(info->edev, EXTCON_DOCK,
cable_attached);
break;
case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */
@@ -869,9 +869,9 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+ extcon_set_state_sync(info->edev, EXTCON_DOCK,
attached);
- extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL,
+ extcon_set_state_sync(info->edev, EXTCON_DISP_MHL,
attached);
break;
}
@@ -905,28 +905,28 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_USB,
+ extcon_set_state_sync(info->edev, EXTCON_USB,
attached);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
break;
case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
/* Only TA cable */
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
attached);
break;
}
break;
case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
attached);
break;
case MAX77693_CHARGER_TYPE_APPLE_500MA:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
attached);
break;
case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
attached);
break;
case MAX77693_CHARGER_TYPE_DEAD_BATTERY:
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
index b188bd6..5d11fdf 100644
--- a/drivers/extcon/extcon-max77843.c
+++ b/drivers/extcon/extcon-max77843.c
@@ -346,7 +346,7 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+ extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX77843_MUIC_GND_MHL_VB:
case MAX77843_MUIC_GND_MHL:
@@ -356,7 +356,7 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+ extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
break;
default:
dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
@@ -392,7 +392,7 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+ extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
return 0;
}
@@ -486,8 +486,8 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
break;
case MAX77843_MUIC_CHG_DOWNSTREAM:
@@ -497,7 +497,7 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
attached);
break;
case MAX77843_MUIC_CHG_DEDICATED:
@@ -507,7 +507,7 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_500MA:
@@ -517,7 +517,7 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_1A:
@@ -527,7 +527,7 @@
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
attached);
break;
case MAX77843_MUIC_CHG_GND:
@@ -536,10 +536,10 @@
/* Charger cable on MHL accessory is attach or detach */
if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
true);
else if (gnd_type == MAX77843_MUIC_GND_MHL)
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
false);
break;
case MAX77843_MUIC_CHG_NONE:
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 9a89320..4a0612f 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -331,11 +331,11 @@
switch (usb_type) {
case MAX8997_USB_HOST:
- extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+ extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX8997_USB_DEVICE:
- extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
break;
default:
@@ -361,7 +361,7 @@
switch (cable_type) {
case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
- extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
+ extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
break;
default:
dev_err(info->dev, "failed to detect %s dock device\n",
@@ -384,7 +384,7 @@
return ret;
}
- extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+ extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
return 0;
}
@@ -406,7 +406,7 @@
return ret;
break;
case MAX8997_MUIC_ADC_MHL:
- extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+ extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
break;
case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
@@ -489,19 +489,19 @@
}
break;
case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
attached);
break;
case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
attached);
break;
case MAX8997_CHARGER_TYPE_500MA:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
attached);
break;
case MAX8997_CHARGER_TYPE_1A:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
attached);
break;
default:
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index caff46c..634ba70 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -61,7 +61,7 @@
if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) {
if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
- extcon_set_cable_state_(edev, EXTCON_USB, true);
+ extcon_set_state_sync(edev, EXTCON_USB, true);
dev_info(palmas_usb->dev, "USB cable is attached\n");
} else {
dev_dbg(palmas_usb->dev,
@@ -70,7 +70,7 @@
} else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) {
if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
- extcon_set_cable_state_(edev, EXTCON_USB, false);
+ extcon_set_state_sync(edev, EXTCON_USB, false);
dev_info(palmas_usb->dev, "USB cable is detached\n");
} else {
dev_dbg(palmas_usb->dev,
@@ -98,7 +98,7 @@
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
- extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
} else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
@@ -106,17 +106,17 @@
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
- extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
- extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
- extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
}
@@ -137,10 +137,10 @@
id = gpiod_get_value_cansleep(palmas_usb->id_gpiod);
if (id) {
- extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
} else {
- extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
}
}
diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c
index 97e074d..174c388 100644
--- a/drivers/extcon/extcon-rt8973a.c
+++ b/drivers/extcon/extcon-rt8973a.c
@@ -398,9 +398,9 @@
return ret;
/* Change the state of external accessory */
- extcon_set_cable_state_(info->edev, id, attached);
+ extcon_set_state_sync(info->edev, id, attached);
if (id == EXTCON_USB)
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
return 0;
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index df769a1..b223256 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -411,9 +411,9 @@
return ret;
/* Change the state of external accessory */
- extcon_set_cable_state_(info->edev, id, attached);
+ extcon_set_state_sync(info->edev, id, attached);
if (id == EXTCON_USB)
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
return 0;
diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
index 2512660..a27d350 100644
--- a/drivers/extcon/extcon-usb-gpio.c
+++ b/drivers/extcon/extcon-usb-gpio.c
@@ -63,16 +63,16 @@
* As we don't have event for USB peripheral cable attached,
* we simulate USB peripheral attach here.
*/
- extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, false);
- extcon_set_cable_state_(info->edev, EXTCON_USB, true);
+ extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(info->edev, EXTCON_USB, true);
} else {
/*
* ID = 0 means USB HOST cable attached.
* As we don't have event for USB peripheral cable detached,
* we simulate USB peripheral detach here.
*/
- extcon_set_cable_state_(info->edev, EXTCON_USB, false);
- extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(info->edev, EXTCON_USB, false);
+ extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true);
}
}