| /* |
| * |
| * device driver for Conexant 2388x based TV cards |
| * MPEG Transport Stream (DVB) routines |
| * |
| * (c) 2004, 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au> |
| * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/fs.h> |
| #include <linux/kthread.h> |
| #include <linux/file.h> |
| #include <linux/suspend.h> |
| |
| #include "cx88.h" |
| #include "dvb-pll.h" |
| #include <media/v4l2-common.h> |
| |
| #include "mt352.h" |
| #include "mt352_priv.h" |
| #include "cx88-vp3054-i2c.h" |
| #include "zl10353.h" |
| #include "cx22702.h" |
| #include "or51132.h" |
| #include "lgdt330x.h" |
| #include "s5h1409.h" |
| #include "xc5000.h" |
| #include "nxt200x.h" |
| #include "cx24123.h" |
| #include "isl6421.h" |
| #include "tuner-simple.h" |
| #include "tda9887.h" |
| #include "s5h1411.h" |
| #include "stv0299.h" |
| #include "z0194a.h" |
| #include "stv0288.h" |
| #include "stb6000.h" |
| #include "cx24116.h" |
| #include "stv0900.h" |
| #include "stb6100.h" |
| #include "stb6100_proc.h" |
| #include "mb86a16.h" |
| #include "ds3000.h" |
| |
| MODULE_DESCRIPTION("driver for cx2388x based DVB cards"); |
| MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); |
| MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); |
| MODULE_LICENSE("GPL"); |
| |
| static unsigned int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug,"enable debug messages [dvb]"); |
| |
| static unsigned int dvb_buf_tscnt = 32; |
| module_param(dvb_buf_tscnt, int, 0644); |
| MODULE_PARM_DESC(dvb_buf_tscnt, "DVB Buffer TS count [dvb]"); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| #define dprintk(level,fmt, arg...) if (debug >= level) \ |
| printk(KERN_DEBUG "%s/2-dvb: " fmt, core->name, ## arg) |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int dvb_buf_setup(struct videobuf_queue *q, |
| unsigned int *count, unsigned int *size) |
| { |
| struct cx8802_dev *dev = q->priv_data; |
| |
| dev->ts_packet_size = 188 * 4; |
| dev->ts_packet_count = dvb_buf_tscnt; |
| |
| *size = dev->ts_packet_size * dev->ts_packet_count; |
| *count = dvb_buf_tscnt; |
| return 0; |
| } |
| |
| static int dvb_buf_prepare(struct videobuf_queue *q, |
| struct videobuf_buffer *vb, enum v4l2_field field) |
| { |
| struct cx8802_dev *dev = q->priv_data; |
| return cx8802_buf_prepare(q, dev, (struct cx88_buffer*)vb,field); |
| } |
| |
| static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) |
| { |
| struct cx8802_dev *dev = q->priv_data; |
| cx8802_buf_queue(dev, (struct cx88_buffer*)vb); |
| } |
| |
| static void dvb_buf_release(struct videobuf_queue *q, |
| struct videobuf_buffer *vb) |
| { |
| cx88_free_buffer(q, (struct cx88_buffer*)vb); |
| } |
| |
| static const struct videobuf_queue_ops dvb_qops = { |
| .buf_setup = dvb_buf_setup, |
| .buf_prepare = dvb_buf_prepare, |
| .buf_queue = dvb_buf_queue, |
| .buf_release = dvb_buf_release, |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int cx88_dvb_bus_ctrl(struct dvb_frontend* fe, int acquire) |
| { |
| struct cx8802_dev *dev= fe->dvb->priv; |
| struct cx8802_driver *drv = NULL; |
| int ret = 0; |
| int fe_id; |
| |
| fe_id = videobuf_dvb_find_frontend(&dev->frontends, fe); |
| if (!fe_id) { |
| printk(KERN_ERR "%s() No frontend found\n", __func__); |
| return -EINVAL; |
| } |
| |
| drv = cx8802_get_driver(dev, CX88_MPEG_DVB); |
| if (drv) { |
| if (acquire){ |
| dev->frontends.active_fe_id = fe_id; |
| ret = drv->request_acquire(drv); |
| } else { |
| ret = drv->request_release(drv); |
| dev->frontends.active_fe_id = 0; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static void cx88_dvb_gate_ctrl(struct cx88_core *core, int open) |
| { |
| struct videobuf_dvb_frontends *f; |
| struct videobuf_dvb_frontend *fe; |
| |
| if (!core->dvbdev) |
| return; |
| |
| f = &core->dvbdev->frontends; |
| |
| if (!f) |
| return; |
| |
| if (f->gate <= 1) /* undefined or fe0 */ |
| fe = videobuf_dvb_get_frontend(f, 1); |
| else |
| fe = videobuf_dvb_get_frontend(f, f->gate); |
| |
| if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) |
| fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open); |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int dvico_fusionhdtv_demod_init(struct dvb_frontend* fe) |
| { |
| static const u8 clock_config [] = { CLOCK_CTL, 0x38, 0x39 }; |
| static const u8 reset [] = { RESET, 0x80 }; |
| static const u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; |
| static const u8 agc_cfg [] = { AGC_TARGET, 0x24, 0x20 }; |
| static const u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; |
| static const u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; |
| |
| mt352_write(fe, clock_config, sizeof(clock_config)); |
| udelay(200); |
| mt352_write(fe, reset, sizeof(reset)); |
| mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
| |
| mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
| mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); |
| mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
| return 0; |
| } |
| |
| static int dvico_dual_demod_init(struct dvb_frontend *fe) |
| { |
| static const u8 clock_config [] = { CLOCK_CTL, 0x38, 0x38 }; |
| static const u8 reset [] = { RESET, 0x80 }; |
| static const u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; |
| static const u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; |
| static const u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; |
| static const u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; |
| |
| mt352_write(fe, clock_config, sizeof(clock_config)); |
| udelay(200); |
| mt352_write(fe, reset, sizeof(reset)); |
| mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
| |
| mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
| mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); |
| mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
| |
| return 0; |
| } |
| |
| static int dntv_live_dvbt_demod_init(struct dvb_frontend* fe) |
| { |
| static const u8 clock_config [] = { 0x89, 0x38, 0x39 }; |
| static const u8 reset [] = { 0x50, 0x80 }; |
| static const u8 adc_ctl_1_cfg [] = { 0x8E, 0x40 }; |
| static const u8 agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF, |
| 0x00, 0xFF, 0x00, 0x40, 0x40 }; |
| static const u8 dntv_extra[] = { 0xB5, 0x7A }; |
| static const u8 capt_range_cfg[] = { 0x75, 0x32 }; |
| |
| mt352_write(fe, clock_config, sizeof(clock_config)); |
| udelay(2000); |
| mt352_write(fe, reset, sizeof(reset)); |
| mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
| |
| mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
| udelay(2000); |
| mt352_write(fe, dntv_extra, sizeof(dntv_extra)); |
| mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
| |
| return 0; |
| } |
| |
| static const struct mt352_config dvico_fusionhdtv = { |
| .demod_address = 0x0f, |
| .demod_init = dvico_fusionhdtv_demod_init, |
| }; |
| |
| static const struct mt352_config dntv_live_dvbt_config = { |
| .demod_address = 0x0f, |
| .demod_init = dntv_live_dvbt_demod_init, |
| }; |
| |
| static const struct mt352_config dvico_fusionhdtv_dual = { |
| .demod_address = 0x0f, |
| .demod_init = dvico_dual_demod_init, |
| }; |
| |
| static const struct zl10353_config cx88_terratec_cinergy_ht_pci_mkii_config = { |
| .demod_address = (0x1e >> 1), |
| .no_tuner = 1, |
| .if2 = 45600, |
| }; |
| |
| static struct mb86a16_config twinhan_vp1027 = { |
| .demod_address = 0x08, |
| }; |
| |
| #if defined(CONFIG_VIDEO_CX88_VP3054) || (defined(CONFIG_VIDEO_CX88_VP3054_MODULE) && defined(MODULE)) |
| static int dntv_live_dvbt_pro_demod_init(struct dvb_frontend* fe) |
| { |
| static const u8 clock_config [] = { 0x89, 0x38, 0x38 }; |
| static const u8 reset [] = { 0x50, 0x80 }; |
| static const u8 adc_ctl_1_cfg [] = { 0x8E, 0x40 }; |
| static const u8 agc_cfg [] = { 0x67, 0x10, 0x20, 0x00, 0xFF, 0xFF, |
| 0x00, 0xFF, 0x00, 0x40, 0x40 }; |
| static const u8 dntv_extra[] = { 0xB5, 0x7A }; |
| static const u8 capt_range_cfg[] = { 0x75, 0x32 }; |
| |
| mt352_write(fe, clock_config, sizeof(clock_config)); |
| udelay(2000); |
| mt352_write(fe, reset, sizeof(reset)); |
| mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
| |
| mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
| udelay(2000); |
| mt352_write(fe, dntv_extra, sizeof(dntv_extra)); |
| mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
| |
| return 0; |
| } |
| |
| static const struct mt352_config dntv_live_dvbt_pro_config = { |
| .demod_address = 0x0f, |
| .no_tuner = 1, |
| .demod_init = dntv_live_dvbt_pro_demod_init, |
| }; |
| #endif |
| |
| static const struct zl10353_config dvico_fusionhdtv_hybrid = { |
| .demod_address = 0x0f, |
| .no_tuner = 1, |
| }; |
| |
| static const struct zl10353_config dvico_fusionhdtv_xc3028 = { |
| .demod_address = 0x0f, |
| .if2 = 45600, |
| .no_tuner = 1, |
| }; |
| |
| static const struct mt352_config dvico_fusionhdtv_mt352_xc3028 = { |
| .demod_address = 0x0f, |
| .if2 = 4560, |
| .no_tuner = 1, |
| .demod_init = dvico_fusionhdtv_demod_init, |
| }; |
| |
| static const struct zl10353_config dvico_fusionhdtv_plus_v1_1 = { |
| .demod_address = 0x0f, |
| }; |
| |
| static const struct cx22702_config connexant_refboard_config = { |
| .demod_address = 0x43, |
| .output_mode = CX22702_SERIAL_OUTPUT, |
| }; |
| |
| static const struct cx22702_config hauppauge_hvr_config = { |
| .demod_address = 0x63, |
| .output_mode = CX22702_SERIAL_OUTPUT, |
| }; |
| |
| static int or51132_set_ts_param(struct dvb_frontend* fe, int is_punctured) |
| { |
| struct cx8802_dev *dev= fe->dvb->priv; |
| dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00; |
| return 0; |
| } |
| |
| static const struct or51132_config pchdtv_hd3000 = { |
| .demod_address = 0x15, |
| .set_ts_params = or51132_set_ts_param, |
| }; |
| |
| static int lgdt330x_pll_rf_set(struct dvb_frontend* fe, int index) |
| { |
| struct cx8802_dev *dev= fe->dvb->priv; |
| struct cx88_core *core = dev->core; |
| |
| dprintk(1, "%s: index = %d\n", __func__, index); |
| if (index == 0) |
| cx_clear(MO_GP0_IO, 8); |
| else |
| cx_set(MO_GP0_IO, 8); |
| return 0; |
| } |
| |
| static int lgdt330x_set_ts_param(struct dvb_frontend* fe, int is_punctured) |
| { |
| struct cx8802_dev *dev= fe->dvb->priv; |
| if (is_punctured) |
| dev->ts_gen_cntrl |= 0x04; |
| else |
| dev->ts_gen_cntrl &= ~0x04; |
| return 0; |
| } |
| |
| static struct lgdt330x_config fusionhdtv_3_gold = { |
| .demod_address = 0x0e, |
| .demod_chip = LGDT3302, |
| .serial_mpeg = 0x04, /* TPSERIAL for 3302 in TOP_CONTROL */ |
| .set_ts_params = lgdt330x_set_ts_param, |
| }; |
| |
| static const struct lgdt330x_config fusionhdtv_5_gold = { |
| .demod_address = 0x0e, |
| .demod_chip = LGDT3303, |
| .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */ |
| .set_ts_params = lgdt330x_set_ts_param, |
| }; |
| |
| static const struct lgdt330x_config pchdtv_hd5500 = { |
| .demod_address = 0x59, |
| .demod_chip = LGDT3303, |
| .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */ |
| .set_ts_params = lgdt330x_set_ts_param, |
| }; |
| |
| static int nxt200x_set_ts_param(struct dvb_frontend* fe, int is_punctured) |
| { |
| struct cx8802_dev *dev= fe->dvb->priv; |
| dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00; |
| return 0; |
| } |
| |
| static const struct nxt200x_config ati_hdtvwonder = { |
| .demod_address = 0x0a, |
| .set_ts_params = nxt200x_set_ts_param, |
| }; |
| |
| static int cx24123_set_ts_param(struct dvb_frontend* fe, |
| int is_punctured) |
| { |
| struct cx8802_dev *dev= fe->dvb->priv; |
| dev->ts_gen_cntrl = 0x02; |
| return 0; |
| } |
| |
| static int kworld_dvbs_100_set_voltage(struct dvb_frontend* fe, |
| fe_sec_voltage_t voltage) |
| { |
| struct cx8802_dev *dev= fe->dvb->priv; |
| struct cx88_core *core = dev->core; |
| |
| if (voltage == SEC_VOLTAGE_OFF) |
| cx_write(MO_GP0_IO, 0x000006fb); |
| else |
| cx_write(MO_GP0_IO, 0x000006f9); |
| |
| if (core->prev_set_voltage) |
| return core->prev_set_voltage(fe, voltage); |
| return 0; |
| } |
| |
| static int geniatech_dvbs_set_voltage(struct dvb_frontend *fe, |
| fe_sec_voltage_t voltage) |
| { |
| struct cx8802_dev *dev= fe->dvb->priv; |
| struct cx88_core *core = dev->core; |
| |
| if (voltage == SEC_VOLTAGE_OFF) { |
| dprintk(1,"LNB Voltage OFF\n"); |
| cx_write(MO_GP0_IO, 0x0000efff); |
| } |
| |
| if (core->prev_set_voltage) |
| return core->prev_set_voltage(fe, voltage); |
| return 0; |
| } |
| |
| static int tevii_dvbs_set_voltage(struct dvb_frontend *fe, |
| fe_sec_voltage_t voltage) |
| { |
| struct cx8802_dev *dev= fe->dvb->priv; |
| struct cx88_core *core = dev->core; |
| |
| cx_set(MO_GP0_IO, 0x6040); |
| switch (voltage) { |
| case SEC_VOLTAGE_13: |
| cx_clear(MO_GP0_IO, 0x20); |
| break; |
| case SEC_VOLTAGE_18: |
| cx_set(MO_GP0_IO, 0x20); |
| break; |
| case SEC_VOLTAGE_OFF: |
| cx_clear(MO_GP0_IO, 0x20); |
| break; |
| } |
| |
| if (core->prev_set_voltage) |
| return core->prev_set_voltage(fe, voltage); |
| return 0; |
| } |
| |
| static int vp1027_set_voltage(struct dvb_frontend *fe, |
| fe_sec_voltage_t voltage) |
| { |
| struct cx8802_dev *dev = fe->dvb->priv; |
| struct cx88_core *core = dev->core; |
| |
| switch (voltage) { |
| case SEC_VOLTAGE_13: |
| dprintk(1, "LNB SEC Voltage=13\n"); |
| cx_write(MO_GP0_IO, 0x00001220); |
| break; |
| case SEC_VOLTAGE_18: |
| dprintk(1, "LNB SEC Voltage=18\n"); |
| cx_write(MO_GP0_IO, 0x00001222); |
| break; |
| case SEC_VOLTAGE_OFF: |
| dprintk(1, "LNB Voltage OFF\n"); |
| cx_write(MO_GP0_IO, 0x00001230); |
| break; |
| } |
| |
| if (core->prev_set_voltage) |
| return core->prev_set_voltage(fe, voltage); |
| return 0; |
| } |
| |
| static const struct cx24123_config geniatech_dvbs_config = { |
| .demod_address = 0x55, |
| .set_ts_params = cx24123_set_ts_param, |
| }; |
| |
| static const struct cx24123_config hauppauge_novas_config = { |
| .demod_address = 0x55, |
| .set_ts_params = cx24123_set_ts_param, |
| }; |
| |
| static const struct cx24123_config kworld_dvbs_100_config = { |
| .demod_address = 0x15, |
| .set_ts_params = cx24123_set_ts_param, |
| .lnb_polarity = 1, |
| }; |
| |
| static const struct s5h1409_config pinnacle_pctv_hd_800i_config = { |
| .demod_address = 0x32 >> 1, |
| .output_mode = S5H1409_PARALLEL_OUTPUT, |
| .gpio = S5H1409_GPIO_ON, |
| .qam_if = 44000, |
| .inversion = S5H1409_INVERSION_OFF, |
| .status_mode = S5H1409_DEMODLOCKING, |
| .mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static const struct s5h1409_config dvico_hdtv5_pci_nano_config = { |
| .demod_address = 0x32 >> 1, |
| .output_mode = S5H1409_SERIAL_OUTPUT, |
| .gpio = S5H1409_GPIO_OFF, |
| .inversion = S5H1409_INVERSION_OFF, |
| .status_mode = S5H1409_DEMODLOCKING, |
| .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static const struct s5h1409_config kworld_atsc_120_config = { |
| .demod_address = 0x32 >> 1, |
| .output_mode = S5H1409_SERIAL_OUTPUT, |
| .gpio = S5H1409_GPIO_OFF, |
| .inversion = S5H1409_INVERSION_OFF, |
| .status_mode = S5H1409_DEMODLOCKING, |
| .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static const struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = { |
| .i2c_address = 0x64, |
| .if_khz = 5380, |
| }; |
| |
| static const struct zl10353_config cx88_pinnacle_hybrid_pctv = { |
| .demod_address = (0x1e >> 1), |
| .no_tuner = 1, |
| .if2 = 45600, |
| }; |
| |
| static const struct zl10353_config cx88_geniatech_x8000_mt = { |
| .demod_address = (0x1e >> 1), |
| .no_tuner = 1, |
| .disable_i2c_gate_ctrl = 1, |
| }; |
| |
| static const struct s5h1411_config dvico_fusionhdtv7_config = { |
| .output_mode = S5H1411_SERIAL_OUTPUT, |
| .gpio = S5H1411_GPIO_ON, |
| .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| .qam_if = S5H1411_IF_44000, |
| .vsb_if = S5H1411_IF_44000, |
| .inversion = S5H1411_INVERSION_OFF, |
| .status_mode = S5H1411_DEMODLOCKING |
| }; |
| |
| static const struct xc5000_config dvico_fusionhdtv7_tuner_config = { |
| .i2c_address = 0xc2 >> 1, |
| .if_khz = 5380, |
| }; |
| |
| static int attach_xc3028(u8 addr, struct cx8802_dev *dev) |
| { |
| struct dvb_frontend *fe; |
| struct videobuf_dvb_frontend *fe0 = NULL; |
| struct xc2028_ctrl ctl; |
| struct xc2028_config cfg = { |
| .i2c_adap = &dev->core->i2c_adap, |
| .i2c_addr = addr, |
| .ctrl = &ctl, |
| }; |
| |
| /* Get the first frontend */ |
| fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); |
| if (!fe0) |
| return -EINVAL; |
| |
| if (!fe0->dvb.frontend) { |
| printk(KERN_ERR "%s/2: dvb frontend not attached. " |
| "Can't attach xc3028\n", |
| dev->core->name); |
| return -EINVAL; |
| } |
| |
| /* |
| * Some xc3028 devices may be hidden by an I2C gate. This is known |
| * to happen with some s5h1409-based devices. |
| * Now that I2C gate is open, sets up xc3028 configuration |
| */ |
| cx88_setup_xc3028(dev->core, &ctl); |
| |
| fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); |
| if (!fe) { |
| printk(KERN_ERR "%s/2: xc3028 attach failed\n", |
| dev->core->name); |
| dvb_frontend_detach(fe0->dvb.frontend); |
| dvb_unregister_frontend(fe0->dvb.frontend); |
| fe0->dvb.frontend = NULL; |
| return -EINVAL; |
| } |
| |
| printk(KERN_INFO "%s/2: xc3028 attached\n", |
| dev->core->name); |
| |
| return 0; |
| } |
| |
| static int cx24116_set_ts_param(struct dvb_frontend *fe, |
| int is_punctured) |
| { |
| struct cx8802_dev *dev = fe->dvb->priv; |
| dev->ts_gen_cntrl = 0x2; |
| |
| return 0; |
| } |
| |
| static int stv0900_set_ts_param(struct dvb_frontend *fe, |
| int is_punctured) |
| { |
| struct cx8802_dev *dev = fe->dvb->priv; |
| dev->ts_gen_cntrl = 0; |
| |
| return 0; |
| } |
| |
| static int cx24116_reset_device(struct dvb_frontend *fe) |
| { |
| struct cx8802_dev *dev = fe->dvb->priv; |
| struct cx88_core *core = dev->core; |
| |
| /* Reset the part */ |
| /* Put the cx24116 into reset */ |
| cx_write(MO_SRST_IO, 0); |
| msleep(10); |
| /* Take the cx24116 out of reset */ |
| cx_write(MO_SRST_IO, 1); |
| msleep(10); |
| |
| return 0; |
| } |
| |
| static const struct cx24116_config hauppauge_hvr4000_config = { |
| .demod_address = 0x05, |
| .set_ts_params = cx24116_set_ts_param, |
| .reset_device = cx24116_reset_device, |
| }; |
| |
| static const struct cx24116_config tevii_s460_config = { |
| .demod_address = 0x55, |
| .set_ts_params = cx24116_set_ts_param, |
| .reset_device = cx24116_reset_device, |
| }; |
| |
| static int ds3000_set_ts_param(struct dvb_frontend *fe, |
| int is_punctured) |
| { |
| struct cx8802_dev *dev = fe->dvb->priv; |
| dev->ts_gen_cntrl = 4; |
| |
| return 0; |
| } |
| |
| static struct ds3000_config tevii_ds3000_config = { |
| .demod_address = 0x68, |
| .set_ts_params = ds3000_set_ts_param, |
| }; |
| |
| static const struct stv0900_config prof_7301_stv0900_config = { |
| .demod_address = 0x6a, |
| /* demod_mode = 0,*/ |
| .xtal = 27000000, |
| .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ |
| .diseqc_mode = 2,/* 2/3 PWM */ |
| .tun1_maddress = 0,/* 0x60 */ |
| .tun1_adc = 0,/* 2 Vpp */ |
| .path1_mode = 3, |
| .set_ts_params = stv0900_set_ts_param, |
| }; |
| |
| static const struct stb6100_config prof_7301_stb6100_config = { |
| .tuner_address = 0x60, |
| .refclock = 27000000, |
| }; |
| |
| static const struct stv0299_config tevii_tuner_sharp_config = { |
| .demod_address = 0x68, |
| .inittab = sharp_z0194a_inittab, |
| .mclk = 88000000UL, |
| .invert = 1, |
| .skip_reinit = 0, |
| .lock_output = 1, |
| .volt13_op0_op1 = STV0299_VOLT13_OP1, |
| .min_delay_ms = 100, |
| .set_symbol_rate = sharp_z0194a_set_symbol_rate, |
| .set_ts_params = cx24116_set_ts_param, |
| }; |
| |
| static const struct stv0288_config tevii_tuner_earda_config = { |
| .demod_address = 0x68, |
| .min_delay_ms = 100, |
| .set_ts_params = cx24116_set_ts_param, |
| }; |
| |
| static int cx8802_alloc_frontends(struct cx8802_dev *dev) |
| { |
| struct cx88_core *core = dev->core; |
| struct videobuf_dvb_frontend *fe = NULL; |
| int i; |
| |
| mutex_init(&dev->frontends.lock); |
| INIT_LIST_HEAD(&dev->frontends.felist); |
| |
| if (!core->board.num_frontends) |
| return -ENODEV; |
| |
| printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, |
| core->board.num_frontends); |
| for (i = 1; i <= core->board.num_frontends; i++) { |
| fe = videobuf_dvb_alloc_frontend(&dev->frontends, i); |
| if (!fe) { |
| printk(KERN_ERR "%s() failed to alloc\n", __func__); |
| videobuf_dvb_dealloc_frontends(&dev->frontends); |
| return -ENOMEM; |
| } |
| } |
| return 0; |
| } |
| |
| |
| |
| static const u8 samsung_smt_7020_inittab[] = { |
| 0x01, 0x15, |
| 0x02, 0x00, |
| 0x03, 0x00, |
| 0x04, 0x7D, |
| 0x05, 0x0F, |
| 0x06, 0x02, |
| 0x07, 0x00, |
| 0x08, 0x60, |
| |
| 0x0A, 0xC2, |
| 0x0B, 0x00, |
| 0x0C, 0x01, |
| 0x0D, 0x81, |
| 0x0E, 0x44, |
| 0x0F, 0x09, |
| 0x10, 0x3C, |
| 0x11, 0x84, |
| 0x12, 0xDA, |
| 0x13, 0x99, |
| 0x14, 0x8D, |
| 0x15, 0xCE, |
| 0x16, 0xE8, |
| 0x17, 0x43, |
| 0x18, 0x1C, |
| 0x19, 0x1B, |
| 0x1A, 0x1D, |
| |
| 0x1C, 0x12, |
| 0x1D, 0x00, |
| 0x1E, 0x00, |
| 0x1F, 0x00, |
| 0x20, 0x00, |
| 0x21, 0x00, |
| 0x22, 0x00, |
| 0x23, 0x00, |
| |
| 0x28, 0x02, |
| 0x29, 0x28, |
| 0x2A, 0x14, |
| 0x2B, 0x0F, |
| 0x2C, 0x09, |
| 0x2D, 0x05, |
| |
| 0x31, 0x1F, |
| 0x32, 0x19, |
| 0x33, 0xFC, |
| 0x34, 0x13, |
| 0xff, 0xff, |
| }; |
| |
| |
| static int samsung_smt_7020_tuner_set_params(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *params) |
| { |
| struct cx8802_dev *dev = fe->dvb->priv; |
| u8 buf[4]; |
| u32 div; |
| struct i2c_msg msg = { |
| .addr = 0x61, |
| .flags = 0, |
| .buf = buf, |
| .len = sizeof(buf) }; |
| |
| div = params->frequency / 125; |
| |
| buf[0] = (div >> 8) & 0x7f; |
| buf[1] = div & 0xff; |
| buf[2] = 0x84; /* 0xC4 */ |
| buf[3] = 0x00; |
| |
| if (params->frequency < 1500000) |
| buf[3] |= 0x10; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| if (i2c_transfer(&dev->core->i2c_adap, &msg, 1) != 1) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int samsung_smt_7020_set_tone(struct dvb_frontend *fe, |
| fe_sec_tone_mode_t tone) |
| { |
| struct cx8802_dev *dev = fe->dvb->priv; |
| struct cx88_core *core = dev->core; |
| |
| cx_set(MO_GP0_IO, 0x0800); |
| |
| switch (tone) { |
| case SEC_TONE_ON: |
| cx_set(MO_GP0_IO, 0x08); |
| break; |
| case SEC_TONE_OFF: |
| cx_clear(MO_GP0_IO, 0x08); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int samsung_smt_7020_set_voltage(struct dvb_frontend *fe, |
| fe_sec_voltage_t voltage) |
| { |
| struct cx8802_dev *dev = fe->dvb->priv; |
| struct cx88_core *core = dev->core; |
| |
| u8 data; |
| struct i2c_msg msg = { |
| .addr = 8, |
| .flags = 0, |
| .buf = &data, |
| .len = sizeof(data) }; |
| |
| cx_set(MO_GP0_IO, 0x8000); |
| |
| switch (voltage) { |
| case SEC_VOLTAGE_OFF: |
| break; |
| case SEC_VOLTAGE_13: |
| data = ISL6421_EN1 | ISL6421_LLC1; |
| cx_clear(MO_GP0_IO, 0x80); |
| break; |
| case SEC_VOLTAGE_18: |
| data = ISL6421_EN1 | ISL6421_LLC1 | ISL6421_VSEL1; |
| cx_clear(MO_GP0_IO, 0x80); |
| break; |
| default: |
| return -EINVAL; |
| }; |
| |
| return (i2c_transfer(&dev->core->i2c_adap, &msg, 1) == 1) ? 0 : -EIO; |
| } |
| |
| static int samsung_smt_7020_stv0299_set_symbol_rate(struct dvb_frontend *fe, |
| u32 srate, u32 ratio) |
| { |
| u8 aclk = 0; |
| u8 bclk = 0; |
| |
| if (srate < 1500000) { |
| aclk = 0xb7; |
| bclk = 0x47; |
| } else if (srate < 3000000) { |
| aclk = 0xb7; |
| bclk = 0x4b; |
| } else if (srate < 7000000) { |
| aclk = 0xb7; |
| bclk = 0x4f; |
| } else if (srate < 14000000) { |
| aclk = 0xb7; |
| bclk = 0x53; |
| } else if (srate < 30000000) { |
| aclk = 0xb6; |
| bclk = 0x53; |
| } else if (srate < 45000000) { |
| aclk = 0xb4; |
| bclk = 0x51; |
| } |
| |
| stv0299_writereg(fe, 0x13, aclk); |
| stv0299_writereg(fe, 0x14, bclk); |
| stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); |
| stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); |
| stv0299_writereg(fe, 0x21, ratio & 0xf0); |
| |
| return 0; |
| } |
| |
| |
| static const struct stv0299_config samsung_stv0299_config = { |
| .demod_address = 0x68, |
| .inittab = samsung_smt_7020_inittab, |
| .mclk = 88000000UL, |
| .invert = 0, |
| .skip_reinit = 0, |
| .lock_output = STV0299_LOCKOUTPUT_LK, |
| .volt13_op0_op1 = STV0299_VOLT13_OP1, |
| .min_delay_ms = 100, |
| .set_symbol_rate = samsung_smt_7020_stv0299_set_symbol_rate, |
| }; |
| |
| static int dvb_register(struct cx8802_dev *dev) |
| { |
| struct cx88_core *core = dev->core; |
| struct videobuf_dvb_frontend *fe0, *fe1 = NULL; |
| int mfe_shared = 0; /* bus not shared by default */ |
| |
| if (0 != core->i2c_rc) { |
| printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); |
| goto frontend_detach; |
| } |
| |
| /* Get the first frontend */ |
| fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); |
| if (!fe0) |
| goto frontend_detach; |
| |
| /* multi-frontend gate control is undefined or defaults to fe0 */ |
| dev->frontends.gate = 0; |
| |
| /* Sets the gate control callback to be used by i2c command calls */ |
| core->gate_ctrl = cx88_dvb_gate_ctrl; |
| |
| /* init frontend(s) */ |
| switch (core->boardnr) { |
| case CX88_BOARD_HAUPPAUGE_DVB_T1: |
| fe0->dvb.frontend = dvb_attach(cx22702_attach, |
| &connexant_refboard_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, |
| 0x61, &core->i2c_adap, |
| DVB_PLL_THOMSON_DTT759X)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1: |
| case CX88_BOARD_CONEXANT_DVB_T1: |
| case CX88_BOARD_KWORLD_DVB_T_CX22702: |
| case CX88_BOARD_WINFAST_DTV1000: |
| fe0->dvb.frontend = dvb_attach(cx22702_attach, |
| &connexant_refboard_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, |
| 0x60, &core->i2c_adap, |
| DVB_PLL_THOMSON_DTT7579)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_WINFAST_DTV2000H: |
| case CX88_BOARD_WINFAST_DTV2000H_J: |
| case CX88_BOARD_HAUPPAUGE_HVR1100: |
| case CX88_BOARD_HAUPPAUGE_HVR1100LP: |
| case CX88_BOARD_HAUPPAUGE_HVR1300: |
| fe0->dvb.frontend = dvb_attach(cx22702_attach, |
| &hauppauge_hvr_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
| &core->i2c_adap, 0x61, |
| TUNER_PHILIPS_FMD1216ME_MK3)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_HAUPPAUGE_HVR3000: |
| /* MFE frontend 1 */ |
| mfe_shared = 1; |
| dev->frontends.gate = 2; |
| /* DVB-S init */ |
| fe0->dvb.frontend = dvb_attach(cx24123_attach, |
| &hauppauge_novas_config, |
| &dev->core->i2c_adap); |
| if (fe0->dvb.frontend) { |
| if (!dvb_attach(isl6421_attach, |
| fe0->dvb.frontend, |
| &dev->core->i2c_adap, |
| 0x08, ISL6421_DCL, 0x00)) |
| goto frontend_detach; |
| } |
| /* MFE frontend 2 */ |
| fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2); |
| if (!fe1) |
| goto frontend_detach; |
| /* DVB-T init */ |
| fe1->dvb.frontend = dvb_attach(cx22702_attach, |
| &hauppauge_hvr_config, |
| &dev->core->i2c_adap); |
| if (fe1->dvb.frontend) { |
| fe1->dvb.frontend->id = 1; |
| if (!dvb_attach(simple_tuner_attach, |
| fe1->dvb.frontend, |
| &dev->core->i2c_adap, |
| 0x61, TUNER_PHILIPS_FMD1216ME_MK3)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS: |
| fe0->dvb.frontend = dvb_attach(mt352_attach, |
| &dvico_fusionhdtv, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, |
| 0x60, NULL, DVB_PLL_THOMSON_DTT7579)) |
| goto frontend_detach; |
| break; |
| } |
| /* ZL10353 replaces MT352 on later cards */ |
| fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| &dvico_fusionhdtv_plus_v1_1, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, |
| 0x60, NULL, DVB_PLL_THOMSON_DTT7579)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL: |
| /* The tin box says DEE1601, but it seems to be DTT7579 |
| * compatible, with a slightly different MT352 AGC gain. */ |
| fe0->dvb.frontend = dvb_attach(mt352_attach, |
| &dvico_fusionhdtv_dual, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, |
| 0x61, NULL, DVB_PLL_THOMSON_DTT7579)) |
| goto frontend_detach; |
| break; |
| } |
| /* ZL10353 replaces MT352 on later cards */ |
| fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| &dvico_fusionhdtv_plus_v1_1, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, |
| 0x61, NULL, DVB_PLL_THOMSON_DTT7579)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1: |
| fe0->dvb.frontend = dvb_attach(mt352_attach, |
| &dvico_fusionhdtv, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, |
| 0x61, NULL, DVB_PLL_LG_Z201)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_KWORLD_DVB_T: |
| case CX88_BOARD_DNTV_LIVE_DVB_T: |
| case CX88_BOARD_ADSTECH_DVB_T_PCI: |
| fe0->dvb.frontend = dvb_attach(mt352_attach, |
| &dntv_live_dvbt_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, |
| 0x61, NULL, DVB_PLL_UNKNOWN_1)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_DNTV_LIVE_DVB_T_PRO: |
| #if defined(CONFIG_VIDEO_CX88_VP3054) || (defined(CONFIG_VIDEO_CX88_VP3054_MODULE) && defined(MODULE)) |
| /* MT352 is on a secondary I2C bus made from some GPIO lines */ |
| fe0->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config, |
| &dev->vp3054->adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
| &core->i2c_adap, 0x61, |
| TUNER_PHILIPS_FMD1216ME_MK3)) |
| goto frontend_detach; |
| } |
| #else |
| printk(KERN_ERR "%s/2: built without vp3054 support\n", |
| core->name); |
| #endif |
| break; |
| case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID: |
| fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| &dvico_fusionhdtv_hybrid, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
| &core->i2c_adap, 0x61, |
| TUNER_THOMSON_FE6600)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: |
| fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| &dvico_fusionhdtv_xc3028, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| fe0->dvb.frontend = dvb_attach(mt352_attach, |
| &dvico_fusionhdtv_mt352_xc3028, |
| &core->i2c_adap); |
| /* |
| * On this board, the demod provides the I2C bus pullup. |
| * We must not permit gate_ctrl to be performed, or |
| * the xc3028 cannot communicate on the bus. |
| */ |
| if (fe0->dvb.frontend) |
| fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; |
| if (attach_xc3028(0x61, dev) < 0) |
| goto frontend_detach; |
| break; |
| case CX88_BOARD_PCHDTV_HD3000: |
| fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
| &core->i2c_adap, 0x61, |
| TUNER_THOMSON_DTT761X)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q: |
| dev->ts_gen_cntrl = 0x08; |
| |
| /* Do a hardware reset of chip before using it. */ |
| cx_clear(MO_GP0_IO, 1); |
| mdelay(100); |
| cx_set(MO_GP0_IO, 1); |
| mdelay(200); |
| |
| /* Select RF connector callback */ |
| fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set; |
| fe0->dvb.frontend = dvb_attach(lgdt330x_attach, |
| &fusionhdtv_3_gold, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
| &core->i2c_adap, 0x61, |
| TUNER_MICROTUNE_4042FI5)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T: |
| dev->ts_gen_cntrl = 0x08; |
| |
| /* Do a hardware reset of chip before using it. */ |
| cx_clear(MO_GP0_IO, 1); |
| mdelay(100); |
| cx_set(MO_GP0_IO, 9); |
| mdelay(200); |
| fe0->dvb.frontend = dvb_attach(lgdt330x_attach, |
| &fusionhdtv_3_gold, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
| &core->i2c_adap, 0x61, |
| TUNER_THOMSON_DTT761X)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD: |
| dev->ts_gen_cntrl = 0x08; |
| |
| /* Do a hardware reset of chip before using it. */ |
| cx_clear(MO_GP0_IO, 1); |
| mdelay(100); |
| cx_set(MO_GP0_IO, 1); |
| mdelay(200); |
| fe0->dvb.frontend = dvb_attach(lgdt330x_attach, |
| &fusionhdtv_5_gold, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
| &core->i2c_adap, 0x61, |
| TUNER_LG_TDVS_H06XF)) |
| goto frontend_detach; |
| if (!dvb_attach(tda9887_attach, fe0->dvb.frontend, |
| &core->i2c_adap, 0x43)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_PCHDTV_HD5500: |
| dev->ts_gen_cntrl = 0x08; |
| |
| /* Do a hardware reset of chip before using it. */ |
| cx_clear(MO_GP0_IO, 1); |
| mdelay(100); |
| cx_set(MO_GP0_IO, 1); |
| mdelay(200); |
| fe0->dvb.frontend = dvb_attach(lgdt330x_attach, |
| &pchdtv_hd5500, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
| &core->i2c_adap, 0x61, |
| TUNER_LG_TDVS_H06XF)) |
| goto frontend_detach; |
| if (!dvb_attach(tda9887_attach, fe0->dvb.frontend, |
| &core->i2c_adap, 0x43)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_ATI_HDTVWONDER: |
| fe0->dvb.frontend = dvb_attach(nxt200x_attach, |
| &ati_hdtvwonder, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
| &core->i2c_adap, 0x61, |
| TUNER_PHILIPS_TUV1236D)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: |
| case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: |
| fe0->dvb.frontend = dvb_attach(cx24123_attach, |
| &hauppauge_novas_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend) { |
| if (!dvb_attach(isl6421_attach, fe0->dvb.frontend, |
| &core->i2c_adap, 0x08, ISL6421_DCL, 0x00)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_KWORLD_DVBS_100: |
| fe0->dvb.frontend = dvb_attach(cx24123_attach, |
| &kworld_dvbs_100_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend) { |
| core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; |
| fe0->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage; |
| } |
| break; |
| case CX88_BOARD_GENIATECH_DVBS: |
| fe0->dvb.frontend = dvb_attach(cx24123_attach, |
| &geniatech_dvbs_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend) { |
| core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; |
| fe0->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage; |
| } |
| break; |
| case CX88_BOARD_PINNACLE_PCTV_HD_800i: |
| fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| &pinnacle_pctv_hd_800i_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| &core->i2c_adap, |
| &pinnacle_pctv_hd_800i_tuner_config)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: |
| fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| &dvico_hdtv5_pci_nano_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| struct dvb_frontend *fe; |
| struct xc2028_config cfg = { |
| .i2c_adap = &core->i2c_adap, |
| .i2c_addr = 0x61, |
| }; |
| static struct xc2028_ctrl ctl = { |
| .fname = XC2028_DEFAULT_FIRMWARE, |
| .max_len = 64, |
| .scode_table = XC3028_FE_OREN538, |
| }; |
| |
| fe = dvb_attach(xc2028_attach, |
| fe0->dvb.frontend, &cfg); |
| if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) |
| fe->ops.tuner_ops.set_config(fe, &ctl); |
| } |
| break; |
| case CX88_BOARD_PINNACLE_HYBRID_PCTV: |
| case CX88_BOARD_WINFAST_DTV1800H: |
| fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| &cx88_pinnacle_hybrid_pctv, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend) { |
| fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; |
| if (attach_xc3028(0x61, dev) < 0) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_GENIATECH_X8000_MT: |
| dev->ts_gen_cntrl = 0x00; |
| |
| fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| &cx88_geniatech_x8000_mt, |
| &core->i2c_adap); |
| if (attach_xc3028(0x61, dev) < 0) |
| goto frontend_detach; |
| break; |
| case CX88_BOARD_KWORLD_ATSC_120: |
| fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| &kworld_atsc_120_config, |
| &core->i2c_adap); |
| if (attach_xc3028(0x61, dev) < 0) |
| goto frontend_detach; |
| break; |
| case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: |
| fe0->dvb.frontend = dvb_attach(s5h1411_attach, |
| &dvico_fusionhdtv7_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| &core->i2c_adap, |
| &dvico_fusionhdtv7_tuner_config)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_HAUPPAUGE_HVR4000: |
| /* MFE frontend 1 */ |
| mfe_shared = 1; |
| dev->frontends.gate = 2; |
| /* DVB-S/S2 Init */ |
| fe0->dvb.frontend = dvb_attach(cx24116_attach, |
| &hauppauge_hvr4000_config, |
| &dev->core->i2c_adap); |
| if (fe0->dvb.frontend) { |
| if (!dvb_attach(isl6421_attach, |
| fe0->dvb.frontend, |
| &dev->core->i2c_adap, |
| 0x08, ISL6421_DCL, 0x00)) |
| goto frontend_detach; |
| } |
| /* MFE frontend 2 */ |
| fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2); |
| if (!fe1) |
| goto frontend_detach; |
| /* DVB-T Init */ |
| fe1->dvb.frontend = dvb_attach(cx22702_attach, |
| &hauppauge_hvr_config, |
| &dev->core->i2c_adap); |
| if (fe1->dvb.frontend) { |
| fe1->dvb.frontend->id = 1; |
| if (!dvb_attach(simple_tuner_attach, |
| fe1->dvb.frontend, |
| &dev->core->i2c_adap, |
| 0x61, TUNER_PHILIPS_FMD1216ME_MK3)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_HAUPPAUGE_HVR4000LITE: |
| fe0->dvb.frontend = dvb_attach(cx24116_attach, |
| &hauppauge_hvr4000_config, |
| &dev->core->i2c_adap); |
| if (fe0->dvb.frontend) { |
| if (!dvb_attach(isl6421_attach, |
| fe0->dvb.frontend, |
| &dev->core->i2c_adap, |
| 0x08, ISL6421_DCL, 0x00)) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_PROF_6200: |
| case CX88_BOARD_TBS_8910: |
| case CX88_BOARD_TEVII_S420: |
| fe0->dvb.frontend = dvb_attach(stv0299_attach, |
| &tevii_tuner_sharp_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, |
| &core->i2c_adap, DVB_PLL_OPERA1)) |
| goto frontend_detach; |
| core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; |
| fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; |
| |
| } else { |
| fe0->dvb.frontend = dvb_attach(stv0288_attach, |
| &tevii_tuner_earda_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(stb6000_attach, fe0->dvb.frontend, 0x61, |
| &core->i2c_adap)) |
| goto frontend_detach; |
| core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; |
| fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; |
| } |
| } |
| break; |
| case CX88_BOARD_TEVII_S460: |
| fe0->dvb.frontend = dvb_attach(cx24116_attach, |
| &tevii_s460_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) |
| fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; |
| break; |
| case CX88_BOARD_TEVII_S464: |
| fe0->dvb.frontend = dvb_attach(ds3000_attach, |
| &tevii_ds3000_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) |
| fe0->dvb.frontend->ops.set_voltage = |
| tevii_dvbs_set_voltage; |
| break; |
| case CX88_BOARD_OMICOM_SS4_PCI: |
| case CX88_BOARD_TBS_8920: |
| case CX88_BOARD_PROF_7300: |
| case CX88_BOARD_SATTRADE_ST4200: |
| fe0->dvb.frontend = dvb_attach(cx24116_attach, |
| &hauppauge_hvr4000_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend != NULL) |
| fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; |
| break; |
| case CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII: |
| fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| &cx88_terratec_cinergy_ht_pci_mkii_config, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend) { |
| fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; |
| if (attach_xc3028(0x61, dev) < 0) |
| goto frontend_detach; |
| } |
| break; |
| case CX88_BOARD_PROF_7301:{ |
| struct dvb_tuner_ops *tuner_ops = NULL; |
| |
| fe0->dvb.frontend = dvb_attach(stv0900_attach, |
| &prof_7301_stv0900_config, |
| &core->i2c_adap, 0); |
| if (fe0->dvb.frontend != NULL) { |
| if (!dvb_attach(stb6100_attach, fe0->dvb.frontend, |
| &prof_7301_stb6100_config, |
| &core->i2c_adap)) |
| goto frontend_detach; |
| |
| tuner_ops = &fe0->dvb.frontend->ops.tuner_ops; |
| tuner_ops->set_frequency = stb6100_set_freq; |
| tuner_ops->get_frequency = stb6100_get_freq; |
| tuner_ops->set_bandwidth = stb6100_set_bandw; |
| tuner_ops->get_bandwidth = stb6100_get_bandw; |
| |
| core->prev_set_voltage = |
| fe0->dvb.frontend->ops.set_voltage; |
| fe0->dvb.frontend->ops.set_voltage = |
| tevii_dvbs_set_voltage; |
| } |
| break; |
| } |
| case CX88_BOARD_SAMSUNG_SMT_7020: |
| dev->ts_gen_cntrl = 0x08; |
| |
| cx_set(MO_GP0_IO, 0x0101); |
| |
| cx_clear(MO_GP0_IO, 0x01); |
| mdelay(100); |
| cx_set(MO_GP0_IO, 0x01); |
| mdelay(200); |
| |
| fe0->dvb.frontend = dvb_attach(stv0299_attach, |
| &samsung_stv0299_config, |
| &dev->core->i2c_adap); |
| if (fe0->dvb.frontend) { |
| fe0->dvb.frontend->ops.tuner_ops.set_params = |
| samsung_smt_7020_tuner_set_params; |
| fe0->dvb.frontend->tuner_priv = |
| &dev->core->i2c_adap; |
| fe0->dvb.frontend->ops.set_voltage = |
| samsung_smt_7020_set_voltage; |
| fe0->dvb.frontend->ops.set_tone = |
| samsung_smt_7020_set_tone; |
| } |
| |
| break; |
| case CX88_BOARD_TWINHAN_VP1027_DVBS: |
| dev->ts_gen_cntrl = 0x00; |
| fe0->dvb.frontend = dvb_attach(mb86a16_attach, |
| &twinhan_vp1027, |
| &core->i2c_adap); |
| if (fe0->dvb.frontend) { |
| core->prev_set_voltage = |
| fe0->dvb.frontend->ops.set_voltage; |
| fe0->dvb.frontend->ops.set_voltage = |
| vp1027_set_voltage; |
| } |
| break; |
| |
| default: |
| printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n", |
| core->name); |
| break; |
| } |
| |
| if ( (NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend) ) { |
| printk(KERN_ERR |
| "%s/2: frontend initialization failed\n", |
| core->name); |
| goto frontend_detach; |
| } |
| /* define general-purpose callback pointer */ |
| fe0->dvb.frontend->callback = cx88_tuner_callback; |
| |
| /* Ensure all frontends negotiate bus access */ |
| fe0->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; |
| if (fe1) |
| fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; |
| |
| /* Put the analog decoder in standby to keep it quiet */ |
| call_all(core, core, s_power, 0); |
| |
| /* register everything */ |
| return videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, |
| &dev->pci->dev, adapter_nr, mfe_shared, NULL); |
| |
| frontend_detach: |
| core->gate_ctrl = NULL; |
| videobuf_dvb_dealloc_frontends(&dev->frontends); |
| return -EINVAL; |
| } |
| |
| /* ----------------------------------------------------------- */ |
| |
| /* CX8802 MPEG -> mini driver - We have been given the hardware */ |
| static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv) |
| { |
| struct cx88_core *core = drv->core; |
| int err = 0; |
| dprintk( 1, "%s\n", __func__); |
| |
| switch (core->boardnr) { |
| case CX88_BOARD_HAUPPAUGE_HVR1300: |
| /* We arrive here with either the cx23416 or the cx22702 |
| * on the bus. Take the bus from the cx23416 and enable the |
| * cx22702 demod |
| */ |
| /* Toggle reset on cx22702 leaving i2c active */ |
| cx_set(MO_GP0_IO, 0x00000080); |
| udelay(1000); |
| cx_clear(MO_GP0_IO, 0x00000080); |
| udelay(50); |
| cx_set(MO_GP0_IO, 0x00000080); |
| udelay(1000); |
| /* enable the cx22702 pins */ |
| cx_clear(MO_GP0_IO, 0x00000004); |
| udelay(1000); |
| break; |
| |
| case CX88_BOARD_HAUPPAUGE_HVR3000: |
| case CX88_BOARD_HAUPPAUGE_HVR4000: |
| /* Toggle reset on cx22702 leaving i2c active */ |
| cx_set(MO_GP0_IO, 0x00000080); |
| udelay(1000); |
| cx_clear(MO_GP0_IO, 0x00000080); |
| udelay(50); |
| cx_set(MO_GP0_IO, 0x00000080); |
| udelay(1000); |
| switch (core->dvbdev->frontends.active_fe_id) { |
| case 1: /* DVB-S/S2 Enabled */ |
| /* tri-state the cx22702 pins */ |
| cx_set(MO_GP0_IO, 0x00000004); |
| /* Take the cx24116/cx24123 out of reset */ |
| cx_write(MO_SRST_IO, 1); |
| core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */ |
| break; |
| case 2: /* DVB-T Enabled */ |
| /* Put the cx24116/cx24123 into reset */ |
| cx_write(MO_SRST_IO, 0); |
| /* enable the cx22702 pins */ |
| cx_clear(MO_GP0_IO, 0x00000004); |
| core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */ |
| break; |
| } |
| udelay(1000); |
| break; |
| |
| default: |
| err = -ENODEV; |
| } |
| return err; |
| } |
| |
| /* CX8802 MPEG -> mini driver - We no longer have the hardware */ |
| static int cx8802_dvb_advise_release(struct cx8802_driver *drv) |
| { |
| struct cx88_core *core = drv->core; |
| int err = 0; |
| dprintk( 1, "%s\n", __func__); |
| |
| switch (core->boardnr) { |
| case CX88_BOARD_HAUPPAUGE_HVR1300: |
| /* Do Nothing, leave the cx22702 on the bus. */ |
| break; |
| case CX88_BOARD_HAUPPAUGE_HVR3000: |
| case CX88_BOARD_HAUPPAUGE_HVR4000: |
| break; |
| default: |
| err = -ENODEV; |
| } |
| return err; |
| } |
| |
| static int cx8802_dvb_probe(struct cx8802_driver *drv) |
| { |
| struct cx88_core *core = drv->core; |
| struct cx8802_dev *dev = drv->core->dvbdev; |
| int err; |
| struct videobuf_dvb_frontend *fe; |
| int i; |
| |
| dprintk( 1, "%s\n", __func__); |
| dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", |
| core->boardnr, |
| core->name, |
| core->pci_bus, |
| core->pci_slot); |
| |
| err = -ENODEV; |
| if (!(core->board.mpeg & CX88_MPEG_DVB)) |
| goto fail_core; |
| |
| /* If vp3054 isn't enabled, a stub will just return 0 */ |
| err = vp3054_i2c_probe(dev); |
| if (0 != err) |
| goto fail_core; |
| |
| /* dvb stuff */ |
| printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name); |
| dev->ts_gen_cntrl = 0x0c; |
| |
| err = cx8802_alloc_frontends(dev); |
| if (err) |
| goto fail_core; |
| |
| err = -ENODEV; |
| for (i = 1; i <= core->board.num_frontends; i++) { |
| fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); |
| if (fe == NULL) { |
| printk(KERN_ERR "%s() failed to get frontend(%d)\n", |
| __func__, i); |
| goto fail_probe; |
| } |
| videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, |
| &dev->pci->dev, &dev->slock, |
| V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| V4L2_FIELD_TOP, |
| sizeof(struct cx88_buffer), |
| dev, NULL); |
| /* init struct videobuf_dvb */ |
| fe->dvb.name = dev->core->name; |
| } |
| |
| err = dvb_register(dev); |
| if (err) |
| /* frontends/adapter de-allocated in dvb_register */ |
| printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n", |
| core->name, err); |
| return err; |
| fail_probe: |
| videobuf_dvb_dealloc_frontends(&core->dvbdev->frontends); |
| fail_core: |
| return err; |
| } |
| |
| static int cx8802_dvb_remove(struct cx8802_driver *drv) |
| { |
| struct cx88_core *core = drv->core; |
| struct cx8802_dev *dev = drv->core->dvbdev; |
| |
| dprintk( 1, "%s\n", __func__); |
| |
| videobuf_dvb_unregister_bus(&dev->frontends); |
| |
| vp3054_i2c_remove(dev); |
| |
| core->gate_ctrl = NULL; |
| |
| return 0; |
| } |
| |
| static struct cx8802_driver cx8802_dvb_driver = { |
| .type_id = CX88_MPEG_DVB, |
| .hw_access = CX8802_DRVCTL_SHARED, |
| .probe = cx8802_dvb_probe, |
| .remove = cx8802_dvb_remove, |
| .advise_acquire = cx8802_dvb_advise_acquire, |
| .advise_release = cx8802_dvb_advise_release, |
| }; |
| |
| static int __init dvb_init(void) |
| { |
| printk(KERN_INFO "cx88/2: cx2388x dvb driver version %d.%d.%d loaded\n", |
| (CX88_VERSION_CODE >> 16) & 0xff, |
| (CX88_VERSION_CODE >> 8) & 0xff, |
| CX88_VERSION_CODE & 0xff); |
| #ifdef SNAPSHOT |
| printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n", |
| SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); |
| #endif |
| return cx8802_register_driver(&cx8802_dvb_driver); |
| } |
| |
| static void __exit dvb_fini(void) |
| { |
| cx8802_unregister_driver(&cx8802_dvb_driver); |
| } |
| |
| module_init(dvb_init); |
| module_exit(dvb_fini); |
| |
| /* |
| * Local variables: |
| * c-basic-offset: 8 |
| * compile-command: "make DVB=1" |
| * End: |
| */ |