Merge branches 'for-3.7/upstream-fixes', 'for-3.8/hidraw', 'for-3.8/i2c-hid', 'for-3.8/multitouch', 'for-3.8/roccat', 'for-3.8/sensors' and 'for-3.8/upstream' into for-linus
Conflicts:
drivers/hid/hid-core.c
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus
index c2a270b..833fd59 100644
--- a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus
@@ -8,3 +8,41 @@
When written, this file sets the number of the startup profile
and the mouse activates this profile immediately.
Please use actual_profile, it does the same thing.
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version
+Date: October 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the raw integer version number of the
+ firmware reported by the mouse. Using the integer value eases
+ further usage in other programs. To receive the real version
+ number the decimal point has to be shifted 2 positions to the
+ left. E.g. a returned value of 121 means 1.21
+ This file is readonly.
+ Please read binary attribute info which contains firmware version.
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons
+Date: August 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can store 5 profiles which can be switched by the
+ press of a button. A profile is split in settings and buttons.
+ profile_buttons holds information about button layout.
+ When read, these files return the respective profile buttons.
+ The returned data is 77 bytes in size.
+ This file is readonly.
+ Write control to select profile and read profile_buttons instead.
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings
+Date: August 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can store 5 profiles which can be switched by the
+ press of a button. A profile is split in settings and buttons.
+ profile_settings holds information like resolution, sensitivity
+ and light effects.
+ When read, these files return the respective profile settings.
+ The returned data is 43 bytes in size.
+ This file is readonly.
+ Write control to select profile and read profile_settings instead.
+Users: http://roccat.sourceforge.net
\ No newline at end of file
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus
new file mode 100644
index 0000000..4a98e02
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus
@@ -0,0 +1,66 @@
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_cpi
+Date: January 2011
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The integer value of this attribute ranges from 1-4.
+ When read, this attribute returns the number of the active
+ cpi level.
+ This file is readonly.
+ Has never been used. If bookkeeping is done, it's done in userland tools.
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x
+Date: January 2011
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The integer value of this attribute ranges from 1-10.
+ When read, this attribute returns the number of the actual
+ sensitivity in x direction.
+ This file is readonly.
+ Has never been used. If bookkeeping is done, it's done in userland tools.
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y
+Date: January 2011
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The integer value of this attribute ranges from 1-10.
+ When read, this attribute returns the number of the actual
+ sensitivity in y direction.
+ This file is readonly.
+ Has never been used. If bookkeeping is done, it's done in userland tools.
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version
+Date: January 2011
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the raw integer version number of the
+ firmware reported by the mouse. Using the integer value eases
+ further usage in other programs. To receive the real version
+ number the decimal point has to be shifted 2 positions to the
+ left. E.g. a returned value of 121 means 1.21
+ This file is readonly.
+ Obsoleted by binary sysfs attribute "info".
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons
+Date: January 2011
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can store 5 profiles which can be switched by the
+ press of a button. A profile is split in settings and buttons.
+ profile_buttons holds information about button layout.
+ When read, these files return the respective profile buttons.
+ The returned data is 23 bytes in size.
+ This file is readonly.
+ Write control to select profile and read profile_buttons instead.
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings
+Date: January 2011
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can store 5 profiles which can be switched by the
+ press of a button. A profile is split in settings and buttons.
+ profile_settings holds information like resolution, sensitivity
+ and light effects.
+ When read, these files return the respective profile settings.
+ The returned data is 16 bytes in size.
+ This file is readonly.
+ Write control to select profile and read profile_settings instead.
+Users: http://roccat.sourceforge.net
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
new file mode 100644
index 0000000..87ac87e
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
@@ -0,0 +1,73 @@
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi
+Date: August 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: It is possible to switch the cpi setting of the mouse with the
+ press of a button.
+ When read, this file returns the raw number of the actual cpi
+ setting reported by the mouse. This number has to be further
+ processed to receive the real dpi value.
+
+ VALUE DPI
+ 1 400
+ 2 800
+ 4 1600
+
+ This file is readonly.
+ Has never been used. If bookkeeping is done, it's done in userland tools.
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile
+Date: August 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the number of the actual profile in
+ range 0-4.
+ This file is readonly.
+ Please use binary attribute "settings" which provides this information.
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version
+Date: August 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the raw integer version number of the
+ firmware reported by the mouse. Using the integer value eases
+ further usage in other programs. To receive the real version
+ number the decimal point has to be shifted 2 positions to the
+ left. E.g. a returned value of 138 means 1.38
+ This file is readonly.
+ Please use binary attribute "info" which provides this information.
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons
+Date: August 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can store 5 profiles which can be switched by the
+ press of a button. A profile is split in settings and buttons.
+ profile_buttons holds information about button layout.
+ When read, these files return the respective profile buttons.
+ The returned data is 19 bytes in size.
+ This file is readonly.
+ Write control to select profile and read profile_buttons instead.
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings
+Date: August 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can store 5 profiles which can be switched by the
+ press of a button. A profile is split in settings and buttons.
+ profile_settings holds information like resolution, sensitivity
+ and light effects.
+ When read, these files return the respective profile settings.
+ The returned data is 13 bytes in size.
+ This file is readonly.
+ Write control to select profile and read profile_settings instead.
+Users: http://roccat.sourceforge.net
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile
+Date: August 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The integer value of this attribute ranges from 0-4.
+ When read, this attribute returns the number of the profile
+ that's active when the mouse is powered on.
+ This file is readonly.
+ Please use binary attribute "settings" which provides this information.
+Users: http://roccat.sourceforge.net
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku b/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
index 189dc43..9eca5a1 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
@@ -117,6 +117,14 @@
which profile and key to read.
Users: http://roccat.sourceforge.net
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/reset
+Date: November 2012
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When written, this file lets one reset the device.
+ The data has to be 3 bytes long.
+ This file is writeonly.
+Users: http://roccat.sourceforge.net
+
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/control
Date: June 2011
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
index 65e6e5d..7bd776f 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
@@ -9,15 +9,12 @@
and the mouse activates this profile immediately.
Users: http://roccat.sourceforge.net
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version
-Date: October 2010
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info
+Date: November 2012
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns the raw integer version number of the
- firmware reported by the mouse. Using the integer value eases
- further usage in other programs. To receive the real version
- number the decimal point has to be shifted 2 positions to the
- left. E.g. a returned value of 121 means 1.21
- This file is readonly.
+Description: When read, this file returns general data like firmware version.
+ When written, the device can be reset.
+ The data is 8 bytes long.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro
@@ -42,18 +39,8 @@
The mouse will reject invalid data.
Which profile to write is determined by the profile number
contained in the data.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons
-Date: August 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_buttons holds information about button layout.
- When read, these files return the respective profile buttons.
- The returned data is 77 bytes in size.
- This file is readonly.
+ Before reading this file, control has to be written to select
+ which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings
@@ -68,19 +55,8 @@
The mouse will reject invalid data.
Which profile to write is determined by the profile number
contained in the data.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings
-Date: August 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_settings holds information like resolution, sensitivity
- and light effects.
- When read, these files return the respective profile settings.
- The returned data is 43 bytes in size.
- This file is readonly.
+ Before reading this file, control has to be written to select
+ which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor
@@ -104,9 +80,9 @@
Date: October 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written a calibration process for the tracking control unit
- can be initiated/cancelled.
- The data has to be 3 bytes long.
- This file is writeonly.
+ can be initiated/cancelled. Also lets one read/write sensor
+ registers.
+ The data has to be 4 bytes long.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
index 20f937c..a10404f 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
@@ -1,12 +1,3 @@
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_cpi
-Date: January 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The integer value of this attribute ranges from 1-4.
- When read, this attribute returns the number of the active
- cpi level.
- This file is readonly.
-Users: http://roccat.sourceforge.net
-
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_profile
Date: January 2011
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
@@ -18,33 +9,12 @@
active when the mouse is powered on.
Users: http://roccat.sourceforge.net
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x
-Date: January 2011
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/info
+Date: November 2012
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The integer value of this attribute ranges from 1-10.
- When read, this attribute returns the number of the actual
- sensitivity in x direction.
- This file is readonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y
-Date: January 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The integer value of this attribute ranges from 1-10.
- When read, this attribute returns the number of the actual
- sensitivity in y direction.
- This file is readonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version
-Date: January 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns the raw integer version number of the
- firmware reported by the mouse. Using the integer value eases
- further usage in other programs. To receive the real version
- number the decimal point has to be shifted 2 positions to the
- left. E.g. a returned value of 121 means 1.21
- This file is readonly.
+Description: When read, this file returns general data like firmware version.
+ When written, the device can be reset.
+ The data is 6 bytes long.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_buttons
@@ -58,18 +28,8 @@
The mouse will reject invalid data.
Which profile to write is determined by the profile number
contained in the data.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons
-Date: January 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_buttons holds information about button layout.
- When read, these files return the respective profile buttons.
- The returned data is 23 bytes in size.
- This file is readonly.
+ Before reading this file, control has to be written to select
+ which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_settings
@@ -84,17 +44,6 @@
The mouse will reject invalid data.
Which profile to write is determined by the profile number
contained in the data.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings
-Date: January 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_settings holds information like resolution, sensitivity
- and light effects.
- When read, these files return the respective profile settings.
- The returned data is 16 bytes in size.
- This file is readonly.
+ Before reading this file, control has to be written to select
+ which profile to read.
Users: http://roccat.sourceforge.net
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua b/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua
new file mode 100644
index 0000000..31c6c4c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua
@@ -0,0 +1,7 @@
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/control
+Date: October 2012
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When written, cpi, button and light settings can be configured.
+ When read, actual cpi setting and sensor data are returned.
+ The data has to be 8 bytes long.
+Users: http://roccat.sourceforge.net
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
index 3f8de50..9fa9de3 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
@@ -1,37 +1,9 @@
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi
-Date: August 2010
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/info
+Date: November 2012
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: It is possible to switch the cpi setting of the mouse with the
- press of a button.
- When read, this file returns the raw number of the actual cpi
- setting reported by the mouse. This number has to be further
- processed to receive the real dpi value.
-
- VALUE DPI
- 1 400
- 2 800
- 4 1600
-
- This file is readonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile
-Date: August 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns the number of the actual profile in
- range 0-4.
- This file is readonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version
-Date: August 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns the raw integer version number of the
- firmware reported by the mouse. Using the integer value eases
- further usage in other programs. To receive the real version
- number the decimal point has to be shifted 2 positions to the
- left. E.g. a returned value of 138 means 1.38
- This file is readonly.
+Description: When read, this file returns general data like firmware version.
+ When written, the device can be reset.
+ The data is 6 bytes long.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings
@@ -46,19 +18,8 @@
The mouse will reject invalid data.
Which profile to write is determined by the profile number
contained in the data.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings
-Date: August 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_settings holds information like resolution, sensitivity
- and light effects.
- When read, these files return the respective profile settings.
- The returned data is 13 bytes in size.
- This file is readonly.
+ Before reading this file, control has to be written to select
+ which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons
@@ -72,27 +33,8 @@
The mouse will reject invalid data.
Which profile to write is determined by the profile number
contained in the data.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons
-Date: August 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_buttons holds information about button layout.
- When read, these files return the respective profile buttons.
- The returned data is 19 bytes in size.
- This file is readonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile
-Date: August 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The integer value of this attribute ranges from 0-4.
- When read, this attribute returns the number of the profile
- that's active when the mouse is powered on.
- This file is readonly.
+ Before reading this file, control has to be written to select
+ which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu b/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu
index b42922c..f1e02a9 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu
@@ -40,8 +40,8 @@
Date: Mai 2012
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When read, this file returns general data like firmware version.
+ When written, the device can be reset.
The data is 8 bytes long.
- This file is readonly.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/macro
@@ -74,4 +74,3 @@
This file allows reading and writing of the mouse sensors registers.
The data has to be 4 bytes long.
Users: http://roccat.sourceforge.net
-
diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt
index 53305bd..f1ea2c6 100644
--- a/Documentation/input/event-codes.txt
+++ b/Documentation/input/event-codes.txt
@@ -196,6 +196,17 @@
EV_MSC events are used for input and output events that do not fall under other
categories.
+A few EV_MSC codes have special meaning:
+
+* MSC_TIMESTAMP:
+ - Used to report the number of microseconds since the last reset. This event
+ should be coded as an uint32 value, which is allowed to wrap around with
+ no special consequence. It is assumed that the time difference between two
+ consecutive events is reliable on a reasonable time scale (hours).
+ A reset to zero can happen, in which case the time since the last event is
+ unknown. If the device does not provide this information, the driver must
+ not provide it to user space.
+
EV_LED:
----------
EV_LED events are used for input and output to set and query the state of
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 1630150..e7d6a13 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -265,6 +265,15 @@
---help---
Support for Gyration remote control.
+config HID_ICADE
+ tristate "ION iCade arcade controller"
+ depends on BT_HIDP
+ ---help---
+ Support for the ION iCade arcade controller to work as a joystick.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hid-icade.
+
config HID_TWINHAN
tristate "Twinhan IR remote control"
depends on USB_HID
@@ -728,4 +737,6 @@
source "drivers/hid/usbhid/Kconfig"
+source "drivers/hid/i2c-hid/Kconfig"
+
endmenu
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index cef68ca..b622157 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -52,6 +52,7 @@
obj-$(CONFIG_HID_HOLTEK) += hid-holtek-kbd.o
obj-$(CONFIG_HID_HOLTEK) += hid-holtekff.o
obj-$(CONFIG_HID_HYPERV_MOUSE) += hid-hyperv.o
+obj-$(CONFIG_HID_ICADE) += hid-icade.o
obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o
obj-$(CONFIG_HID_KEYTOUCH) += hid-keytouch.o
obj-$(CONFIG_HID_KYE) += hid-kye.o
@@ -93,8 +94,8 @@
obj-$(CONFIG_HID_PS3REMOTE) += hid-ps3remote.o
obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o hid-roccat-common.o \
hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \
- hid-roccat-koneplus.o hid-roccat-kovaplus.o hid-roccat-pyra.o \
- hid-roccat-savu.o
+ hid-roccat-koneplus.o hid-roccat-kovaplus.o hid-roccat-lua.o \
+ hid-roccat-pyra.o hid-roccat-savu.o
obj-$(CONFIG_HID_SAITEK) += hid-saitek.o
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
@@ -118,3 +119,4 @@
obj-$(CONFIG_USB_MOUSE) += usbhid/
obj-$(CONFIG_USB_KBD) += usbhid/
+obj-$(CONFIG_I2C_HID) += i2c-hid/
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index fd7722a..d0f7662 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -439,7 +439,8 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO),
- .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
+ APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_RDESC_JIS },
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index c96e548..eb2ee11 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -92,6 +92,7 @@
static struct hid_field *hid_register_field(struct hid_report *report, unsigned usages, unsigned values)
{
struct hid_field *field;
+ int i;
if (report->maxfield == HID_MAX_FIELDS) {
hid_err(report->device, "too many fields in report\n");
@@ -110,6 +111,9 @@
field->value = (s32 *)(field->usage + usages);
field->report = report;
+ for (i = 0; i < usages; i++)
+ field->usage[i].usage_index = i;
+
return field;
}
@@ -315,6 +319,7 @@
static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
{
+ __u32 raw_value;
switch (item->tag) {
case HID_GLOBAL_ITEM_TAG_PUSH:
@@ -365,7 +370,14 @@
return 0;
case HID_GLOBAL_ITEM_TAG_UNIT_EXPONENT:
- parser->global.unit_exponent = item_sdata(item);
+ /* Units exponent negative numbers are given through a
+ * two's complement.
+ * See "6.2.2.7 Global Items" for more information. */
+ raw_value = item_udata(item);
+ if (!(raw_value & 0xfffffff0))
+ parser->global.unit_exponent = hid_snto32(raw_value, 4);
+ else
+ parser->global.unit_exponent = raw_value;
return 0;
case HID_GLOBAL_ITEM_TAG_UNIT:
@@ -870,6 +882,12 @@
return value & (1 << (n - 1)) ? value | (-1 << n) : value;
}
+s32 hid_snto32(__u32 value, unsigned n)
+{
+ return snto32(value, n);
+}
+EXPORT_SYMBOL_GPL(hid_snto32);
+
/*
* Convert a signed 32-bit integer to a signed n-bit integer.
*/
@@ -1547,6 +1565,7 @@
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
@@ -1580,6 +1599,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
@@ -1663,6 +1683,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ISKU) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONEPLUS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KOVAPLUS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_LUA) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRED) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_SAVU) },
@@ -2154,8 +2175,13 @@
{ }
};
-static bool hid_ignore(struct hid_device *hdev)
+bool hid_ignore(struct hid_device *hdev)
{
+ if (hdev->quirks & HID_QUIRK_NO_IGNORE)
+ return false;
+ if (hdev->quirks & HID_QUIRK_IGNORE)
+ return true;
+
switch (hdev->vendor) {
case USB_VENDOR_ID_CODEMERCS:
/* ignore all Code Mercenaries IOWarrior devices */
@@ -2192,7 +2218,16 @@
if (hdev->product == USB_DEVICE_ID_JESS_YUREX &&
hdev->type == HID_TYPE_USBNONE)
return true;
- break;
+ break;
+ case USB_VENDOR_ID_DWAV:
+ /* These are handled by usbtouchscreen. hdev->type is probably
+ * HID_TYPE_USBNONE, but we say !HID_TYPE_USBMOUSE to match
+ * usbtouchscreen. */
+ if ((hdev->product == USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER ||
+ hdev->product == USB_DEVICE_ID_DWAV_TOUCHCONTROLLER) &&
+ hdev->type != HID_TYPE_USBMOUSE)
+ return true;
+ break;
}
if (hdev->type == HID_TYPE_USBMOUSE &&
@@ -2201,6 +2236,7 @@
return !!hid_match_id(hdev, hid_ignore_list);
}
+EXPORT_SYMBOL_GPL(hid_ignore);
int hid_add_device(struct hid_device *hdev)
{
@@ -2212,8 +2248,7 @@
/* we need to kill them here, otherwise they will stay allocated to
* wait for coming driver */
- if (!(hdev->quirks & HID_QUIRK_NO_IGNORE)
- && (hid_ignore(hdev) || (hdev->quirks & HID_QUIRK_IGNORE)))
+ if (hid_ignore(hdev))
return -ENODEV;
/*
diff --git a/drivers/hid/hid-icade.c b/drivers/hid/hid-icade.c
new file mode 100644
index 0000000..1d6565e3
--- /dev/null
+++ b/drivers/hid/hid-icade.c
@@ -0,0 +1,259 @@
+/*
+ * ION iCade input driver
+ *
+ * Copyright (c) 2012 Bastien Nocera <hadess@hadess.net>
+ * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+/*
+ * ↑ A C Y L
+ * ← →
+ * ↓ B X Z R
+ *
+ *
+ * UP ON,OFF = w,e
+ * RT ON,OFF = d,c
+ * DN ON,OFF = x,z
+ * LT ON,OFF = a,q
+ * A ON,OFF = y,t
+ * B ON,OFF = h,r
+ * C ON,OFF = u,f
+ * X ON,OFF = j,n
+ * Y ON,OFF = i,m
+ * Z ON,OFF = k,p
+ * L ON,OFF = o,g
+ * R ON,OFF = l,v
+ */
+
+/* The translation code uses HID usage instead of input layer
+ * keys. This code generates a lookup table that makes
+ * translation quick.
+ *
+ * #include <linux/input.h>
+ * #include <stdio.h>
+ * #include <assert.h>
+ *
+ * #define unk KEY_UNKNOWN
+ *
+ * < copy of hid_keyboard[] from hid-input.c >
+ *
+ * struct icade_key_translation {
+ * int from;
+ * const char *to;
+ * int press;
+ * };
+ *
+ * static const struct icade_key_translation icade_keys[] = {
+ * { KEY_W, "KEY_UP", 1 },
+ * { KEY_E, "KEY_UP", 0 },
+ * { KEY_D, "KEY_RIGHT", 1 },
+ * { KEY_C, "KEY_RIGHT", 0 },
+ * { KEY_X, "KEY_DOWN", 1 },
+ * { KEY_Z, "KEY_DOWN", 0 },
+ * { KEY_A, "KEY_LEFT", 1 },
+ * { KEY_Q, "KEY_LEFT", 0 },
+ * { KEY_Y, "BTN_A", 1 },
+ * { KEY_T, "BTN_A", 0 },
+ * { KEY_H, "BTN_B", 1 },
+ * { KEY_R, "BTN_B", 0 },
+ * { KEY_U, "BTN_C", 1 },
+ * { KEY_F, "BTN_C", 0 },
+ * { KEY_J, "BTN_X", 1 },
+ * { KEY_N, "BTN_X", 0 },
+ * { KEY_I, "BTN_Y", 1 },
+ * { KEY_M, "BTN_Y", 0 },
+ * { KEY_K, "BTN_Z", 1 },
+ * { KEY_P, "BTN_Z", 0 },
+ * { KEY_O, "BTN_THUMBL", 1 },
+ * { KEY_G, "BTN_THUMBL", 0 },
+ * { KEY_L, "BTN_THUMBR", 1 },
+ * { KEY_V, "BTN_THUMBR", 0 },
+ *
+ * { }
+ * };
+ *
+ * static int
+ * usage_for_key (int key)
+ * {
+ * int i;
+ * for (i = 0; i < 256; i++) {
+ * if (hid_keyboard[i] == key)
+ * return i;
+ * }
+ * assert(0);
+ * }
+ *
+ * int main (int argc, char **argv)
+ * {
+ * const struct icade_key_translation *trans;
+ * int max_usage = 0;
+ *
+ * for (trans = icade_keys; trans->from; trans++) {
+ * int usage = usage_for_key (trans->from);
+ * max_usage = usage > max_usage ? usage : max_usage;
+ * }
+ *
+ * printf ("#define ICADE_MAX_USAGE %d\n\n", max_usage);
+ * printf ("struct icade_key {\n");
+ * printf ("\tu16 to;\n");
+ * printf ("\tu8 press:1;\n");
+ * printf ("};\n\n");
+ * printf ("static const struct icade_key "
+ * "icade_usage_table[%d] = {\n", max_usage + 1);
+ * for (trans = icade_keys; trans->from; trans++) {
+ * printf ("\t[%d] = { %s, %d },\n",
+ * usage_for_key (trans->from), trans->to, trans->press);
+ * }
+ * printf ("};\n");
+ *
+ * return 0;
+ * }
+ */
+
+#define ICADE_MAX_USAGE 29
+
+struct icade_key {
+ u16 to;
+ u8 press:1;
+};
+
+static const struct icade_key icade_usage_table[30] = {
+ [26] = { KEY_UP, 1 },
+ [8] = { KEY_UP, 0 },
+ [7] = { KEY_RIGHT, 1 },
+ [6] = { KEY_RIGHT, 0 },
+ [27] = { KEY_DOWN, 1 },
+ [29] = { KEY_DOWN, 0 },
+ [4] = { KEY_LEFT, 1 },
+ [20] = { KEY_LEFT, 0 },
+ [28] = { BTN_A, 1 },
+ [23] = { BTN_A, 0 },
+ [11] = { BTN_B, 1 },
+ [21] = { BTN_B, 0 },
+ [24] = { BTN_C, 1 },
+ [9] = { BTN_C, 0 },
+ [13] = { BTN_X, 1 },
+ [17] = { BTN_X, 0 },
+ [12] = { BTN_Y, 1 },
+ [16] = { BTN_Y, 0 },
+ [14] = { BTN_Z, 1 },
+ [19] = { BTN_Z, 0 },
+ [18] = { BTN_THUMBL, 1 },
+ [10] = { BTN_THUMBL, 0 },
+ [15] = { BTN_THUMBR, 1 },
+ [25] = { BTN_THUMBR, 0 },
+};
+
+static const struct icade_key *icade_find_translation(u16 from)
+{
+ if (from < 0 || from > ICADE_MAX_USAGE)
+ return NULL;
+ return &icade_usage_table[from];
+}
+
+static int icade_event(struct hid_device *hdev, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ const struct icade_key *trans;
+
+ if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput ||
+ !usage->type)
+ return 0;
+
+ /* We ignore the fake key up, and act only on key down */
+ if (!value)
+ return 1;
+
+ trans = icade_find_translation(usage->hid & HID_USAGE);
+
+ if (!trans)
+ return 1;
+
+ input_event(field->hidinput->input, usage->type,
+ trans->to, trans->press);
+
+ return 1;
+}
+
+static int icade_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ const struct icade_key *trans;
+
+ if ((usage->hid & HID_USAGE_PAGE) == HID_UP_KEYBOARD) {
+ trans = icade_find_translation(usage->hid & HID_USAGE);
+
+ if (!trans)
+ return -1;
+
+ hid_map_usage(hi, usage, bit, max, EV_KEY, trans->to);
+ set_bit(trans->to, hi->input->keybit);
+
+ return 1;
+ }
+
+ /* ignore others */
+ return -1;
+
+}
+
+static int icade_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if (usage->type == EV_KEY)
+ set_bit(usage->type, hi->input->evbit);
+
+ return -1;
+}
+
+static const struct hid_device_id icade_devices[] = {
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) },
+
+ { }
+};
+MODULE_DEVICE_TABLE(hid, icade_devices);
+
+static struct hid_driver icade_driver = {
+ .name = "icade",
+ .id_table = icade_devices,
+ .event = icade_event,
+ .input_mapped = icade_input_mapped,
+ .input_mapping = icade_input_mapping,
+};
+
+static int __init icade_init(void)
+{
+ int ret;
+
+ ret = hid_register_driver(&icade_driver);
+ if (ret)
+ pr_err("can't register icade driver\n");
+
+ return ret;
+}
+
+static void __exit icade_exit(void)
+{
+ hid_unregister_driver(&icade_driver);
+}
+
+module_init(icade_init);
+module_exit(icade_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Bastien Nocera <hadess@hadess.net>");
+MODULE_DESCRIPTION("ION iCade input driver");
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 8fd25d3..4dfa605 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -257,6 +257,7 @@
#define USB_VENDOR_ID_DWAV 0x0eef
#define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER 0x0001
+#define USB_DEVICE_ID_DWAV_TOUCHCONTROLLER 0x0002
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480D 0x480d
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E 0x480e
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7207 0x7207
@@ -423,6 +424,9 @@
#define USB_VENDOR_ID_ILITEK 0x222a
#define USB_DEVICE_ID_ILITEK_MULTITOUCH 0x0001
+#define USB_VENDOR_ID_ION 0x15e4
+#define USB_DEVICE_ID_ICADE 0x0132
+
#define USB_VENDOR_ID_HOLTEK 0x1241
#define USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP 0x5015
@@ -598,6 +602,7 @@
#define USB_VENDOR_ID_NOVATEK 0x0603
#define USB_DEVICE_ID_NOVATEK_PCT 0x0600
+#define USB_DEVICE_ID_NOVATEK_MOUSE 0x1602
#define USB_VENDOR_ID_NTRIG 0x1b96
#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN 0x0001
@@ -672,7 +677,9 @@
#define USB_DEVICE_ID_ROCCAT_ISKU 0x319c
#define USB_DEVICE_ID_ROCCAT_KONE 0x2ced
#define USB_DEVICE_ID_ROCCAT_KONEPLUS 0x2d51
+#define USB_DEVICE_ID_ROCCAT_KONEXTD 0x2e22
#define USB_DEVICE_ID_ROCCAT_KOVAPLUS 0x2d50
+#define USB_DEVICE_ID_ROCCAT_LUA 0x2c2e
#define USB_DEVICE_ID_ROCCAT_PYRA_WIRED 0x2c24
#define USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS 0x2cf6
#define USB_DEVICE_ID_ROCCAT_SAVU 0x2d5a
@@ -691,6 +698,9 @@
#define USB_VENDOR_ID_SIGMA_MICRO 0x1c4f
#define USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD 0x0002
+#define USB_VENDOR_ID_SIGMATEL 0x066F
+#define USB_DEVICE_ID_SIGMATEL_STMP3780 0x3780
+
#define USB_VENDOR_ID_SKYCABLE 0x1223
#define USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER 0x3F07
@@ -756,6 +766,9 @@
#define USB_VENDOR_ID_TOUCHPACK 0x1bfd
#define USB_DEVICE_ID_TOUCHPACK_RTS 0x1688
+#define USB_VENDOR_ID_TPV 0x25aa
+#define USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN 0x8883
+
#define USB_VENDOR_ID_TURBOX 0x062a
#define USB_DEVICE_ID_TURBOX_KEYBOARD 0x0201
#define USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART 0x7100
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index d917c0d..21b196c 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -192,7 +192,6 @@
return -EINVAL;
}
-
/**
* hidinput_calc_abs_res - calculate an absolute axis resolution
* @field: the HID report field to calculate resolution for
@@ -208,7 +207,7 @@
* Only exponent 1 length units are processed. Centimeters and inches are
* converted to millimeters. Degrees are converted to radians.
*/
-static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
+__s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
{
__s32 unit_exponent = field->unit_exponent;
__s32 logical_extents = field->logical_maximum -
@@ -229,17 +228,29 @@
case ABS_X:
case ABS_Y:
case ABS_Z:
- if (field->unit == 0x11) { /* If centimeters */
+ case ABS_MT_POSITION_X:
+ case ABS_MT_POSITION_Y:
+ case ABS_MT_TOOL_X:
+ case ABS_MT_TOOL_Y:
+ case ABS_MT_TOUCH_MAJOR:
+ case ABS_MT_TOUCH_MINOR:
+ if (field->unit & 0xffffff00) /* Not a length */
+ return 0;
+ unit_exponent += hid_snto32(field->unit >> 4, 4) - 1;
+ switch (field->unit & 0xf) {
+ case 0x1: /* If centimeters */
/* Convert to millimeters */
unit_exponent += 1;
- } else if (field->unit == 0x13) { /* If inches */
+ break;
+ case 0x3: /* If inches */
/* Convert to millimeters */
prev = physical_extents;
physical_extents *= 254;
if (physical_extents < prev)
return 0;
unit_exponent -= 1;
- } else {
+ break;
+ default:
return 0;
}
break;
@@ -281,8 +292,9 @@
}
/* Calculate resolution */
- return logical_extents / physical_extents;
+ return DIV_ROUND_CLOSEST(logical_extents, physical_extents);
}
+EXPORT_SYMBOL_GPL(hidinput_calc_abs_res);
#ifdef CONFIG_HID_BATTERY_STRENGTH
static enum power_supply_property hidinput_battery_props[] = {
@@ -299,6 +311,9 @@
static const struct hid_device_id hid_battery_quirks[] = {
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
+ USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
+ HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI),
HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
@@ -502,9 +517,14 @@
if (code <= 0xf)
code += BTN_JOYSTICK;
else
- code += BTN_TRIGGER_HAPPY;
+ code += BTN_TRIGGER_HAPPY - 0x10;
break;
- case HID_GD_GAMEPAD: code += BTN_GAMEPAD; break;
+ case HID_GD_GAMEPAD:
+ if (code <= 0xf)
+ code += BTN_GAMEPAD;
+ else
+ code += BTN_TRIGGER_HAPPY - 0x10;
+ break;
default:
switch (field->physical) {
case HID_GD_MOUSE:
@@ -1146,6 +1166,38 @@
}
}
+static struct hid_input *hidinput_allocate(struct hid_device *hid)
+{
+ struct hid_input *hidinput = kzalloc(sizeof(*hidinput), GFP_KERNEL);
+ struct input_dev *input_dev = input_allocate_device();
+ if (!hidinput || !input_dev) {
+ kfree(hidinput);
+ input_free_device(input_dev);
+ hid_err(hid, "Out of memory during hid input probe\n");
+ return NULL;
+ }
+
+ input_set_drvdata(input_dev, hid);
+ input_dev->event = hid->ll_driver->hidinput_input_event;
+ input_dev->open = hidinput_open;
+ input_dev->close = hidinput_close;
+ input_dev->setkeycode = hidinput_setkeycode;
+ input_dev->getkeycode = hidinput_getkeycode;
+
+ input_dev->name = hid->name;
+ input_dev->phys = hid->phys;
+ input_dev->uniq = hid->uniq;
+ input_dev->id.bustype = hid->bus;
+ input_dev->id.vendor = hid->vendor;
+ input_dev->id.product = hid->product;
+ input_dev->id.version = hid->version;
+ input_dev->dev.parent = hid->dev.parent;
+ hidinput->input = input_dev;
+ list_add_tail(&hidinput->list, &hid->inputs);
+
+ return hidinput;
+}
+
/*
* Register the input device; print a message.
* Configure the input layer interface
@@ -1157,7 +1209,6 @@
struct hid_driver *drv = hid->driver;
struct hid_report *report;
struct hid_input *hidinput = NULL;
- struct input_dev *input_dev;
int i, j, k;
INIT_LIST_HEAD(&hid->inputs);
@@ -1188,33 +1239,9 @@
continue;
if (!hidinput) {
- hidinput = kzalloc(sizeof(*hidinput), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!hidinput || !input_dev) {
- kfree(hidinput);
- input_free_device(input_dev);
- hid_err(hid, "Out of memory during hid input probe\n");
+ hidinput = hidinput_allocate(hid);
+ if (!hidinput)
goto out_unwind;
- }
-
- input_set_drvdata(input_dev, hid);
- input_dev->event =
- hid->ll_driver->hidinput_input_event;
- input_dev->open = hidinput_open;
- input_dev->close = hidinput_close;
- input_dev->setkeycode = hidinput_setkeycode;
- input_dev->getkeycode = hidinput_getkeycode;
-
- input_dev->name = hid->name;
- input_dev->phys = hid->phys;
- input_dev->uniq = hid->uniq;
- input_dev->id.bustype = hid->bus;
- input_dev->id.vendor = hid->vendor;
- input_dev->id.product = hid->product;
- input_dev->id.version = hid->version;
- input_dev->dev.parent = hid->dev.parent;
- hidinput->input = input_dev;
- list_add_tail(&hidinput->list, &hid->inputs);
}
for (i = 0; i < report->maxfield; i++)
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 7867d69..61543c0 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -52,11 +52,14 @@
#define MT_QUIRK_VALID_IS_CONFIDENCE (1 << 6)
#define MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE (1 << 8)
#define MT_QUIRK_NO_AREA (1 << 9)
+#define MT_QUIRK_IGNORE_DUPLICATES (1 << 10)
+#define MT_QUIRK_HOVERING (1 << 11)
struct mt_slot {
- __s32 x, y, p, w, h;
+ __s32 x, y, cx, cy, p, w, h;
__s32 contactid; /* the device ContactID assigned to this slot */
bool touch_state; /* is the touch valid? */
+ bool inrange_state; /* is the finger in proximity of the sensor? */
};
struct mt_class {
@@ -121,6 +124,7 @@
#define MT_CLS_GENERALTOUCH_PWT_TENFINGERS 0x0109
#define MT_DEFAULT_MAXCONTACT 10
+#define MT_MAX_MAXCONTACT 250
#define MT_USB_DEVICE(v, p) HID_DEVICE(BUS_USB, HID_GROUP_MULTITOUCH, v, p)
#define MT_BT_DEVICE(v, p) HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_MULTITOUCH, v, p)
@@ -282,11 +286,26 @@
case HID_DG_CONTACTMAX:
td->maxcontact_report_id = field->report->id;
td->maxcontacts = field->value[0];
+ if (!td->maxcontacts &&
+ field->logical_maximum <= MT_MAX_MAXCONTACT)
+ td->maxcontacts = field->logical_maximum;
if (td->mtclass.maxcontacts)
/* check if the maxcontacts is given by the class */
td->maxcontacts = td->mtclass.maxcontacts;
break;
+ case 0xff0000c5:
+ if (field->report_count == 256 && field->report_size == 8) {
+ /* Win 8 devices need special quirks */
+ __s32 *quirks = &td->mtclass.quirks;
+ *quirks |= MT_QUIRK_ALWAYS_VALID;
+ *quirks |= MT_QUIRK_IGNORE_DUPLICATES;
+ *quirks |= MT_QUIRK_HOVERING;
+ *quirks &= ~MT_QUIRK_NOT_SEEN_MEANS_UP;
+ *quirks &= ~MT_QUIRK_VALID_IS_INRANGE;
+ *quirks &= ~MT_QUIRK_VALID_IS_CONFIDENCE;
+ }
+ break;
}
}
@@ -297,6 +316,7 @@
int fmax = field->logical_maximum;
int fuzz = snratio ? (fmax - fmin) / snratio : 0;
input_set_abs_params(input, code, fmin, fmax, fuzz, 0);
+ input_abs_set_res(input, code, hidinput_calc_abs_res(field, code));
}
static void mt_store_field(struct hid_usage *usage, struct mt_device *td,
@@ -317,6 +337,7 @@
struct mt_device *td = hid_get_drvdata(hdev);
struct mt_class *cls = &td->mtclass;
int code;
+ struct hid_usage *prev_usage = NULL;
/* Only map fields from TouchScreen or TouchPad collections.
* We need to ignore fields that belong to other collections
@@ -339,23 +360,42 @@
if (field->physical == HID_DG_STYLUS)
return -1;
+ if (usage->usage_index)
+ prev_usage = &field->usage[usage->usage_index - 1];
+
switch (usage->hid & HID_USAGE_PAGE) {
case HID_UP_GENDESK:
switch (usage->hid) {
case HID_GD_X:
- hid_map_usage(hi, usage, bit, max,
+ if (prev_usage && (prev_usage->hid == usage->hid)) {
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TOOL_X);
+ set_abs(hi->input, ABS_MT_TOOL_X, field,
+ cls->sn_move);
+ } else {
+ hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_X);
- set_abs(hi->input, ABS_MT_POSITION_X, field,
- cls->sn_move);
+ set_abs(hi->input, ABS_MT_POSITION_X, field,
+ cls->sn_move);
+ }
+
mt_store_field(usage, td, hi);
td->last_field_index = field->index;
return 1;
case HID_GD_Y:
- hid_map_usage(hi, usage, bit, max,
+ if (prev_usage && (prev_usage->hid == usage->hid)) {
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TOOL_Y);
+ set_abs(hi->input, ABS_MT_TOOL_Y, field,
+ cls->sn_move);
+ } else {
+ hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_Y);
- set_abs(hi->input, ABS_MT_POSITION_Y, field,
- cls->sn_move);
+ set_abs(hi->input, ABS_MT_POSITION_Y, field,
+ cls->sn_move);
+ }
+
mt_store_field(usage, td, hi);
td->last_field_index = field->index;
return 1;
@@ -365,6 +405,12 @@
case HID_UP_DIGITIZER:
switch (usage->hid) {
case HID_DG_INRANGE:
+ if (cls->quirks & MT_QUIRK_HOVERING) {
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_DISTANCE);
+ input_set_abs_params(hi->input,
+ ABS_MT_DISTANCE, 0, 1, 0, 0);
+ }
mt_store_field(usage, td, hi);
td->last_field_index = field->index;
return 1;
@@ -477,18 +523,26 @@
*/
static void mt_complete_slot(struct mt_device *td, struct input_dev *input)
{
- if (td->curvalid) {
+ if (td->curvalid || (td->mtclass.quirks & MT_QUIRK_ALWAYS_VALID)) {
int slotnum = mt_compute_slot(td, input);
struct mt_slot *s = &td->curdata;
+ struct input_mt *mt = input->mt;
if (slotnum < 0 || slotnum >= td->maxcontacts)
return;
+ if ((td->mtclass.quirks & MT_QUIRK_IGNORE_DUPLICATES) && mt) {
+ struct input_mt_slot *slot = &mt->slots[slotnum];
+ if (input_mt_is_active(slot) &&
+ input_mt_is_used(mt, slot))
+ return;
+ }
+
input_mt_slot(input, slotnum);
input_mt_report_slot_state(input, MT_TOOL_FINGER,
- s->touch_state);
- if (s->touch_state) {
- /* this finger is on the screen */
+ s->touch_state || s->inrange_state);
+ if (s->touch_state || s->inrange_state) {
+ /* this finger is in proximity of the sensor */
int wide = (s->w > s->h);
/* divided by two to match visual scale of touch */
int major = max(s->w, s->h) >> 1;
@@ -496,6 +550,10 @@
input_event(input, EV_ABS, ABS_MT_POSITION_X, s->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, s->y);
+ input_event(input, EV_ABS, ABS_MT_TOOL_X, s->cx);
+ input_event(input, EV_ABS, ABS_MT_TOOL_Y, s->cy);
+ input_event(input, EV_ABS, ABS_MT_DISTANCE,
+ !s->touch_state);
input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
input_event(input, EV_ABS, ABS_MT_PRESSURE, s->p);
input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
@@ -526,10 +584,10 @@
if (hid->claimed & HID_CLAIMED_INPUT) {
switch (usage->hid) {
case HID_DG_INRANGE:
- if (quirks & MT_QUIRK_ALWAYS_VALID)
- td->curvalid = true;
- else if (quirks & MT_QUIRK_VALID_IS_INRANGE)
+ if (quirks & MT_QUIRK_VALID_IS_INRANGE)
td->curvalid = value;
+ if (quirks & MT_QUIRK_HOVERING)
+ td->curdata.inrange_state = value;
break;
case HID_DG_TIPSWITCH:
if (quirks & MT_QUIRK_NOT_SEEN_MEANS_UP)
@@ -547,10 +605,16 @@
td->curdata.p = value;
break;
case HID_GD_X:
- td->curdata.x = value;
+ if (usage->code == ABS_MT_TOOL_X)
+ td->curdata.cx = value;
+ else
+ td->curdata.x = value;
break;
case HID_GD_Y:
- td->curdata.y = value;
+ if (usage->code == ABS_MT_TOOL_Y)
+ td->curdata.cy = value;
+ else
+ td->curdata.y = value;
break;
case HID_DG_WIDTH:
td->curdata.w = value;
@@ -575,12 +639,15 @@
return 0;
}
- if (usage->hid == td->last_slot_field)
- mt_complete_slot(td, field->hidinput->input);
+ if (usage->usage_index + 1 == field->report_count) {
+ /* we only take into account the last report. */
+ if (usage->hid == td->last_slot_field)
+ mt_complete_slot(td, field->hidinput->input);
- if (field->index == td->last_field_index
- && td->num_received >= td->num_expected)
- mt_sync_frame(td, field->hidinput->input);
+ if (field->index == td->last_field_index
+ && td->num_received >= td->num_expected)
+ mt_sync_frame(td, field->hidinput->input);
+ }
}
diff --git a/drivers/hid/hid-roccat-isku.c b/drivers/hid/hid-roccat-isku.c
index 5669916..1219998 100644
--- a/drivers/hid/hid-roccat-isku.c
+++ b/drivers/hid/hid-roccat-isku.c
@@ -167,7 +167,7 @@
loff_t off, size_t count) \
{ \
return isku_sysfs_write(fp, kobj, buf, off, count, \
- sizeof(struct isku_ ## thingy), ISKU_COMMAND_ ## THINGY); \
+ ISKU_SIZE_ ## THINGY, ISKU_COMMAND_ ## THINGY); \
}
#define ISKU_SYSFS_R(thingy, THINGY) \
@@ -176,32 +176,32 @@
loff_t off, size_t count) \
{ \
return isku_sysfs_read(fp, kobj, buf, off, count, \
- sizeof(struct isku_ ## thingy), ISKU_COMMAND_ ## THINGY); \
+ ISKU_SIZE_ ## THINGY, ISKU_COMMAND_ ## THINGY); \
}
#define ISKU_SYSFS_RW(thingy, THINGY) \
ISKU_SYSFS_R(thingy, THINGY) \
ISKU_SYSFS_W(thingy, THINGY)
-#define ISKU_BIN_ATTR_RW(thingy) \
+#define ISKU_BIN_ATTR_RW(thingy, THINGY) \
{ \
.attr = { .name = #thingy, .mode = 0660 }, \
- .size = sizeof(struct isku_ ## thingy), \
+ .size = ISKU_SIZE_ ## THINGY, \
.read = isku_sysfs_read_ ## thingy, \
.write = isku_sysfs_write_ ## thingy \
}
-#define ISKU_BIN_ATTR_R(thingy) \
+#define ISKU_BIN_ATTR_R(thingy, THINGY) \
{ \
.attr = { .name = #thingy, .mode = 0440 }, \
- .size = sizeof(struct isku_ ## thingy), \
+ .size = ISKU_SIZE_ ## THINGY, \
.read = isku_sysfs_read_ ## thingy, \
}
-#define ISKU_BIN_ATTR_W(thingy) \
+#define ISKU_BIN_ATTR_W(thingy, THINGY) \
{ \
.attr = { .name = #thingy, .mode = 0220 }, \
- .size = sizeof(struct isku_ ## thingy), \
+ .size = ISKU_SIZE_ ## THINGY, \
.write = isku_sysfs_write_ ## thingy \
}
@@ -218,21 +218,23 @@
ISKU_SYSFS_W(talk, TALK)
ISKU_SYSFS_R(info, INFO)
ISKU_SYSFS_W(control, CONTROL)
+ISKU_SYSFS_W(reset, RESET)
static struct bin_attribute isku_bin_attributes[] = {
- ISKU_BIN_ATTR_RW(macro),
- ISKU_BIN_ATTR_RW(keys_function),
- ISKU_BIN_ATTR_RW(keys_easyzone),
- ISKU_BIN_ATTR_RW(keys_media),
- ISKU_BIN_ATTR_RW(keys_thumbster),
- ISKU_BIN_ATTR_RW(keys_macro),
- ISKU_BIN_ATTR_RW(keys_capslock),
- ISKU_BIN_ATTR_RW(light),
- ISKU_BIN_ATTR_RW(key_mask),
- ISKU_BIN_ATTR_RW(last_set),
- ISKU_BIN_ATTR_W(talk),
- ISKU_BIN_ATTR_R(info),
- ISKU_BIN_ATTR_W(control),
+ ISKU_BIN_ATTR_RW(macro, MACRO),
+ ISKU_BIN_ATTR_RW(keys_function, KEYS_FUNCTION),
+ ISKU_BIN_ATTR_RW(keys_easyzone, KEYS_EASYZONE),
+ ISKU_BIN_ATTR_RW(keys_media, KEYS_MEDIA),
+ ISKU_BIN_ATTR_RW(keys_thumbster, KEYS_THUMBSTER),
+ ISKU_BIN_ATTR_RW(keys_macro, KEYS_MACRO),
+ ISKU_BIN_ATTR_RW(keys_capslock, KEYS_CAPSLOCK),
+ ISKU_BIN_ATTR_RW(light, LIGHT),
+ ISKU_BIN_ATTR_RW(key_mask, KEY_MASK),
+ ISKU_BIN_ATTR_RW(last_set, LAST_SET),
+ ISKU_BIN_ATTR_W(talk, TALK),
+ ISKU_BIN_ATTR_R(info, INFO),
+ ISKU_BIN_ATTR_W(control, CONTROL),
+ ISKU_BIN_ATTR_W(reset, RESET),
__ATTR_NULL
};
diff --git a/drivers/hid/hid-roccat-isku.h b/drivers/hid/hid-roccat-isku.h
index 605b3ce..cf6896c 100644
--- a/drivers/hid/hid-roccat-isku.h
+++ b/drivers/hid/hid-roccat-isku.h
@@ -15,76 +15,33 @@
#include <linux/types.h>
enum {
+ ISKU_SIZE_CONTROL = 0x03,
+ ISKU_SIZE_INFO = 0x06,
+ ISKU_SIZE_KEY_MASK = 0x06,
+ ISKU_SIZE_KEYS_FUNCTION = 0x29,
+ ISKU_SIZE_KEYS_EASYZONE = 0x41,
+ ISKU_SIZE_KEYS_MEDIA = 0x1d,
+ ISKU_SIZE_KEYS_THUMBSTER = 0x17,
+ ISKU_SIZE_KEYS_MACRO = 0x23,
+ ISKU_SIZE_KEYS_CAPSLOCK = 0x06,
+ ISKU_SIZE_LAST_SET = 0x14,
+ ISKU_SIZE_LIGHT = 0x0a,
+ ISKU_SIZE_MACRO = 0x823,
+ ISKU_SIZE_RESET = 0x03,
+ ISKU_SIZE_TALK = 0x10,
+};
+
+enum {
ISKU_PROFILE_NUM = 5,
ISKU_USB_INTERFACE_PROTOCOL = 0,
};
-struct isku_control {
- uint8_t command; /* ISKU_COMMAND_CONTROL */
- uint8_t value;
- uint8_t request;
-} __packed;
-
struct isku_actual_profile {
uint8_t command; /* ISKU_COMMAND_ACTUAL_PROFILE */
uint8_t size; /* always 3 */
uint8_t actual_profile;
} __packed;
-struct isku_key_mask {
- uint8_t command; /* ISKU_COMMAND_KEY_MASK */
- uint8_t size; /* 6 */
- uint8_t profile_number; /* 0-4 */
- uint8_t mask;
- uint16_t checksum;
-} __packed;
-
-struct isku_keys_function {
- uint8_t data[0x29];
-} __packed;
-
-struct isku_keys_easyzone {
- uint8_t data[0x41];
-} __packed;
-
-struct isku_keys_media {
- uint8_t data[0x1d];
-} __packed;
-
-struct isku_keys_thumbster {
- uint8_t data[0x17];
-} __packed;
-
-struct isku_keys_macro {
- uint8_t data[0x23];
-} __packed;
-
-struct isku_keys_capslock {
- uint8_t data[0x6];
-} __packed;
-
-struct isku_macro {
- uint8_t data[0x823];
-} __packed;
-
-struct isku_light {
- uint8_t data[0xa];
-} __packed;
-
-struct isku_info {
- uint8_t data[2];
- uint8_t firmware_version;
- uint8_t unknown[3];
-} __packed;
-
-struct isku_talk {
- uint8_t data[0x10];
-} __packed;
-
-struct isku_last_set {
- uint8_t data[0x14];
-} __packed;
-
enum isku_commands {
ISKU_COMMAND_CONTROL = 0x4,
ISKU_COMMAND_ACTUAL_PROFILE = 0x5,
@@ -97,6 +54,7 @@
ISKU_COMMAND_MACRO = 0xe,
ISKU_COMMAND_INFO = 0xf,
ISKU_COMMAND_LIGHT = 0x10,
+ ISKU_COMMAND_RESET = 0x11,
ISKU_COMMAND_KEYS_CAPSLOCK = 0x13,
ISKU_COMMAND_LAST_SET = 0x14,
ISKU_COMMAND_15 = 0x15,
diff --git a/drivers/hid/hid-roccat-koneplus.c b/drivers/hid/hid-roccat-koneplus.c
index f5602fe..6a48fa3 100644
--- a/drivers/hid/hid-roccat-koneplus.c
+++ b/drivers/hid/hid-roccat-koneplus.c
@@ -14,6 +14,7 @@
/*
* Roccat Kone[+] is an updated/improved version of the Kone with more memory
* and functionality and without the non-standard behaviours the Kone had.
+ * KoneXTD has same capabilities but updated sensor.
*/
#include <linux/device.h>
@@ -55,56 +56,6 @@
&control, sizeof(struct roccat_common2_control));
}
-static int koneplus_get_info(struct usb_device *usb_dev,
- struct koneplus_info *buf)
-{
- return roccat_common2_receive(usb_dev, KONEPLUS_COMMAND_INFO,
- buf, sizeof(struct koneplus_info));
-}
-
-static int koneplus_get_profile_settings(struct usb_device *usb_dev,
- struct koneplus_profile_settings *buf, uint number)
-{
- int retval;
-
- retval = koneplus_send_control(usb_dev, number,
- KONEPLUS_CONTROL_REQUEST_PROFILE_SETTINGS);
- if (retval)
- return retval;
-
- return roccat_common2_receive(usb_dev, KONEPLUS_COMMAND_PROFILE_SETTINGS,
- buf, sizeof(struct koneplus_profile_settings));
-}
-
-static int koneplus_set_profile_settings(struct usb_device *usb_dev,
- struct koneplus_profile_settings const *settings)
-{
- return roccat_common2_send_with_status(usb_dev,
- KONEPLUS_COMMAND_PROFILE_SETTINGS,
- settings, sizeof(struct koneplus_profile_settings));
-}
-
-static int koneplus_get_profile_buttons(struct usb_device *usb_dev,
- struct koneplus_profile_buttons *buf, int number)
-{
- int retval;
-
- retval = koneplus_send_control(usb_dev, number,
- KONEPLUS_CONTROL_REQUEST_PROFILE_BUTTONS);
- if (retval)
- return retval;
-
- return roccat_common2_receive(usb_dev, KONEPLUS_COMMAND_PROFILE_BUTTONS,
- buf, sizeof(struct koneplus_profile_buttons));
-}
-
-static int koneplus_set_profile_buttons(struct usb_device *usb_dev,
- struct koneplus_profile_buttons const *buttons)
-{
- return roccat_common2_send_with_status(usb_dev,
- KONEPLUS_COMMAND_PROFILE_BUTTONS,
- buttons, sizeof(struct koneplus_profile_buttons));
-}
/* retval is 0-4 on success, < 0 on error */
static int koneplus_get_actual_profile(struct usb_device *usb_dev)
@@ -113,7 +64,7 @@
int retval;
retval = roccat_common2_receive(usb_dev, KONEPLUS_COMMAND_ACTUAL_PROFILE,
- &buf, sizeof(struct koneplus_actual_profile));
+ &buf, KONEPLUS_SIZE_ACTUAL_PROFILE);
return retval ? retval : buf.actual_profile;
}
@@ -124,12 +75,12 @@
struct koneplus_actual_profile buf;
buf.command = KONEPLUS_COMMAND_ACTUAL_PROFILE;
- buf.size = sizeof(struct koneplus_actual_profile);
+ buf.size = KONEPLUS_SIZE_ACTUAL_PROFILE;
buf.actual_profile = new_profile;
return roccat_common2_send_with_status(usb_dev,
KONEPLUS_COMMAND_ACTUAL_PROFILE,
- &buf, sizeof(struct koneplus_actual_profile));
+ &buf, KONEPLUS_SIZE_ACTUAL_PROFILE);
}
static ssize_t koneplus_sysfs_read(struct file *fp, struct kobject *kobj,
@@ -182,53 +133,59 @@
return real_size;
}
-static ssize_t koneplus_sysfs_write_talk(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- return koneplus_sysfs_write(fp, kobj, buf, off, count,
- sizeof(struct koneplus_talk), KONEPLUS_COMMAND_TALK);
+#define KONEPLUS_SYSFS_W(thingy, THINGY) \
+static ssize_t koneplus_sysfs_write_ ## thingy(struct file *fp, \
+ struct kobject *kobj, struct bin_attribute *attr, char *buf, \
+ loff_t off, size_t count) \
+{ \
+ return koneplus_sysfs_write(fp, kobj, buf, off, count, \
+ KONEPLUS_SIZE_ ## THINGY, KONEPLUS_COMMAND_ ## THINGY); \
}
-static ssize_t koneplus_sysfs_write_macro(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- return koneplus_sysfs_write(fp, kobj, buf, off, count,
- sizeof(struct koneplus_macro), KONEPLUS_COMMAND_MACRO);
+#define KONEPLUS_SYSFS_R(thingy, THINGY) \
+static ssize_t koneplus_sysfs_read_ ## thingy(struct file *fp, \
+ struct kobject *kobj, struct bin_attribute *attr, char *buf, \
+ loff_t off, size_t count) \
+{ \
+ return koneplus_sysfs_read(fp, kobj, buf, off, count, \
+ KONEPLUS_SIZE_ ## THINGY, KONEPLUS_COMMAND_ ## THINGY); \
}
-static ssize_t koneplus_sysfs_read_sensor(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- return koneplus_sysfs_read(fp, kobj, buf, off, count,
- sizeof(struct koneplus_sensor), KONEPLUS_COMMAND_SENSOR);
+#define KONEPLUS_SYSFS_RW(thingy, THINGY) \
+KONEPLUS_SYSFS_W(thingy, THINGY) \
+KONEPLUS_SYSFS_R(thingy, THINGY)
+
+#define KONEPLUS_BIN_ATTRIBUTE_RW(thingy, THINGY) \
+{ \
+ .attr = { .name = #thingy, .mode = 0660 }, \
+ .size = KONEPLUS_SIZE_ ## THINGY, \
+ .read = koneplus_sysfs_read_ ## thingy, \
+ .write = koneplus_sysfs_write_ ## thingy \
}
-static ssize_t koneplus_sysfs_write_sensor(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- return koneplus_sysfs_write(fp, kobj, buf, off, count,
- sizeof(struct koneplus_sensor), KONEPLUS_COMMAND_SENSOR);
+#define KONEPLUS_BIN_ATTRIBUTE_R(thingy, THINGY) \
+{ \
+ .attr = { .name = #thingy, .mode = 0440 }, \
+ .size = KONEPLUS_SIZE_ ## THINGY, \
+ .read = koneplus_sysfs_read_ ## thingy, \
}
-static ssize_t koneplus_sysfs_write_tcu(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- return koneplus_sysfs_write(fp, kobj, buf, off, count,
- sizeof(struct koneplus_tcu), KONEPLUS_COMMAND_TCU);
+#define KONEPLUS_BIN_ATTRIBUTE_W(thingy, THINGY) \
+{ \
+ .attr = { .name = #thingy, .mode = 0220 }, \
+ .size = KONEPLUS_SIZE_ ## THINGY, \
+ .write = koneplus_sysfs_write_ ## thingy \
}
-static ssize_t koneplus_sysfs_read_tcu_image(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- return koneplus_sysfs_read(fp, kobj, buf, off, count,
- sizeof(struct koneplus_tcu_image), KONEPLUS_COMMAND_TCU);
-}
+KONEPLUS_SYSFS_W(control, CONTROL)
+KONEPLUS_SYSFS_RW(info, INFO)
+KONEPLUS_SYSFS_W(talk, TALK)
+KONEPLUS_SYSFS_W(macro, MACRO)
+KONEPLUS_SYSFS_RW(sensor, SENSOR)
+KONEPLUS_SYSFS_RW(tcu, TCU)
+KONEPLUS_SYSFS_R(tcu_image, TCU_IMAGE)
+KONEPLUS_SYSFS_RW(profile_settings, PROFILE_SETTINGS)
+KONEPLUS_SYSFS_RW(profile_buttons, PROFILE_BUTTONS)
static ssize_t koneplus_sysfs_read_profilex_settings(struct file *fp,
struct kobject *kobj, struct bin_attribute *attr, char *buf,
@@ -236,57 +193,17 @@
{
struct device *dev =
container_of(kobj, struct device, kobj)->parent->parent;
- struct koneplus_device *koneplus = hid_get_drvdata(dev_get_drvdata(dev));
-
- if (off >= sizeof(struct koneplus_profile_settings))
- return 0;
-
- if (off + count > sizeof(struct koneplus_profile_settings))
- count = sizeof(struct koneplus_profile_settings) - off;
-
- mutex_lock(&koneplus->koneplus_lock);
- memcpy(buf, ((char const *)&koneplus->profile_settings[*(uint *)(attr->private)]) + off,
- count);
- mutex_unlock(&koneplus->koneplus_lock);
-
- return count;
-}
-
-static ssize_t koneplus_sysfs_write_profile_settings(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- struct device *dev =
- container_of(kobj, struct device, kobj)->parent->parent;
- struct koneplus_device *koneplus = hid_get_drvdata(dev_get_drvdata(dev));
struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
- int retval = 0;
- int difference;
- int profile_number;
- struct koneplus_profile_settings *profile_settings;
+ ssize_t retval;
- if (off != 0 || count != sizeof(struct koneplus_profile_settings))
- return -EINVAL;
-
- profile_number = ((struct koneplus_profile_settings const *)buf)->number;
- profile_settings = &koneplus->profile_settings[profile_number];
-
- mutex_lock(&koneplus->koneplus_lock);
- difference = memcmp(buf, profile_settings,
- sizeof(struct koneplus_profile_settings));
- if (difference) {
- retval = koneplus_set_profile_settings(usb_dev,
- (struct koneplus_profile_settings const *)buf);
- if (!retval)
- memcpy(profile_settings, buf,
- sizeof(struct koneplus_profile_settings));
- }
- mutex_unlock(&koneplus->koneplus_lock);
-
+ retval = koneplus_send_control(usb_dev, *(uint *)(attr->private),
+ KONEPLUS_CONTROL_REQUEST_PROFILE_SETTINGS);
if (retval)
return retval;
- return sizeof(struct koneplus_profile_settings);
+ return koneplus_sysfs_read(fp, kobj, buf, off, count,
+ KONEPLUS_SIZE_PROFILE_SETTINGS,
+ KONEPLUS_COMMAND_PROFILE_SETTINGS);
}
static ssize_t koneplus_sysfs_read_profilex_buttons(struct file *fp,
@@ -295,57 +212,17 @@
{
struct device *dev =
container_of(kobj, struct device, kobj)->parent->parent;
- struct koneplus_device *koneplus = hid_get_drvdata(dev_get_drvdata(dev));
-
- if (off >= sizeof(struct koneplus_profile_buttons))
- return 0;
-
- if (off + count > sizeof(struct koneplus_profile_buttons))
- count = sizeof(struct koneplus_profile_buttons) - off;
-
- mutex_lock(&koneplus->koneplus_lock);
- memcpy(buf, ((char const *)&koneplus->profile_buttons[*(uint *)(attr->private)]) + off,
- count);
- mutex_unlock(&koneplus->koneplus_lock);
-
- return count;
-}
-
-static ssize_t koneplus_sysfs_write_profile_buttons(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- struct device *dev =
- container_of(kobj, struct device, kobj)->parent->parent;
- struct koneplus_device *koneplus = hid_get_drvdata(dev_get_drvdata(dev));
struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
- int retval = 0;
- int difference;
- uint profile_number;
- struct koneplus_profile_buttons *profile_buttons;
+ ssize_t retval;
- if (off != 0 || count != sizeof(struct koneplus_profile_buttons))
- return -EINVAL;
-
- profile_number = ((struct koneplus_profile_buttons const *)buf)->number;
- profile_buttons = &koneplus->profile_buttons[profile_number];
-
- mutex_lock(&koneplus->koneplus_lock);
- difference = memcmp(buf, profile_buttons,
- sizeof(struct koneplus_profile_buttons));
- if (difference) {
- retval = koneplus_set_profile_buttons(usb_dev,
- (struct koneplus_profile_buttons const *)buf);
- if (!retval)
- memcpy(profile_buttons, buf,
- sizeof(struct koneplus_profile_buttons));
- }
- mutex_unlock(&koneplus->koneplus_lock);
-
+ retval = koneplus_send_control(usb_dev, *(uint *)(attr->private),
+ KONEPLUS_CONTROL_REQUEST_PROFILE_BUTTONS);
if (retval)
return retval;
- return sizeof(struct koneplus_profile_buttons);
+ return koneplus_sysfs_read(fp, kobj, buf, off, count,
+ KONEPLUS_SIZE_PROFILE_BUTTONS,
+ KONEPLUS_COMMAND_PROFILE_BUTTONS);
}
static ssize_t koneplus_sysfs_show_actual_profile(struct device *dev,
@@ -401,9 +278,20 @@
static ssize_t koneplus_sysfs_show_firmware_version(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct koneplus_device *koneplus =
- hid_get_drvdata(dev_get_drvdata(dev->parent->parent));
- return snprintf(buf, PAGE_SIZE, "%d\n", koneplus->info.firmware_version);
+ struct koneplus_device *koneplus;
+ struct usb_device *usb_dev;
+ struct koneplus_info info;
+
+ dev = dev->parent->parent;
+ koneplus = hid_get_drvdata(dev_get_drvdata(dev));
+ usb_dev = interface_to_usbdev(to_usb_interface(dev));
+
+ mutex_lock(&koneplus->koneplus_lock);
+ roccat_common2_receive(usb_dev, KONEPLUS_COMMAND_INFO,
+ &info, KONEPLUS_SIZE_INFO);
+ mutex_unlock(&koneplus->koneplus_lock);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", info.firmware_version);
}
static struct device_attribute koneplus_attributes[] = {
@@ -419,132 +307,85 @@
};
static struct bin_attribute koneplus_bin_attributes[] = {
- {
- .attr = { .name = "sensor", .mode = 0660 },
- .size = sizeof(struct koneplus_sensor),
- .read = koneplus_sysfs_read_sensor,
- .write = koneplus_sysfs_write_sensor
- },
- {
- .attr = { .name = "tcu", .mode = 0220 },
- .size = sizeof(struct koneplus_tcu),
- .write = koneplus_sysfs_write_tcu
- },
- {
- .attr = { .name = "tcu_image", .mode = 0440 },
- .size = sizeof(struct koneplus_tcu_image),
- .read = koneplus_sysfs_read_tcu_image
- },
- {
- .attr = { .name = "profile_settings", .mode = 0220 },
- .size = sizeof(struct koneplus_profile_settings),
- .write = koneplus_sysfs_write_profile_settings
- },
+ KONEPLUS_BIN_ATTRIBUTE_W(control, CONTROL),
+ KONEPLUS_BIN_ATTRIBUTE_RW(info, INFO),
+ KONEPLUS_BIN_ATTRIBUTE_W(talk, TALK),
+ KONEPLUS_BIN_ATTRIBUTE_W(macro, MACRO),
+ KONEPLUS_BIN_ATTRIBUTE_RW(sensor, SENSOR),
+ KONEPLUS_BIN_ATTRIBUTE_RW(tcu, TCU),
+ KONEPLUS_BIN_ATTRIBUTE_R(tcu_image, TCU_IMAGE),
+ KONEPLUS_BIN_ATTRIBUTE_RW(profile_settings, PROFILE_SETTINGS),
+ KONEPLUS_BIN_ATTRIBUTE_RW(profile_buttons, PROFILE_BUTTONS),
{
.attr = { .name = "profile1_settings", .mode = 0440 },
- .size = sizeof(struct koneplus_profile_settings),
+ .size = KONEPLUS_SIZE_PROFILE_SETTINGS,
.read = koneplus_sysfs_read_profilex_settings,
.private = &profile_numbers[0]
},
{
.attr = { .name = "profile2_settings", .mode = 0440 },
- .size = sizeof(struct koneplus_profile_settings),
+ .size = KONEPLUS_SIZE_PROFILE_SETTINGS,
.read = koneplus_sysfs_read_profilex_settings,
.private = &profile_numbers[1]
},
{
.attr = { .name = "profile3_settings", .mode = 0440 },
- .size = sizeof(struct koneplus_profile_settings),
+ .size = KONEPLUS_SIZE_PROFILE_SETTINGS,
.read = koneplus_sysfs_read_profilex_settings,
.private = &profile_numbers[2]
},
{
.attr = { .name = "profile4_settings", .mode = 0440 },
- .size = sizeof(struct koneplus_profile_settings),
+ .size = KONEPLUS_SIZE_PROFILE_SETTINGS,
.read = koneplus_sysfs_read_profilex_settings,
.private = &profile_numbers[3]
},
{
.attr = { .name = "profile5_settings", .mode = 0440 },
- .size = sizeof(struct koneplus_profile_settings),
+ .size = KONEPLUS_SIZE_PROFILE_SETTINGS,
.read = koneplus_sysfs_read_profilex_settings,
.private = &profile_numbers[4]
},
{
- .attr = { .name = "profile_buttons", .mode = 0220 },
- .size = sizeof(struct koneplus_profile_buttons),
- .write = koneplus_sysfs_write_profile_buttons
- },
- {
.attr = { .name = "profile1_buttons", .mode = 0440 },
- .size = sizeof(struct koneplus_profile_buttons),
+ .size = KONEPLUS_SIZE_PROFILE_BUTTONS,
.read = koneplus_sysfs_read_profilex_buttons,
.private = &profile_numbers[0]
},
{
.attr = { .name = "profile2_buttons", .mode = 0440 },
- .size = sizeof(struct koneplus_profile_buttons),
+ .size = KONEPLUS_SIZE_PROFILE_BUTTONS,
.read = koneplus_sysfs_read_profilex_buttons,
.private = &profile_numbers[1]
},
{
.attr = { .name = "profile3_buttons", .mode = 0440 },
- .size = sizeof(struct koneplus_profile_buttons),
+ .size = KONEPLUS_SIZE_PROFILE_BUTTONS,
.read = koneplus_sysfs_read_profilex_buttons,
.private = &profile_numbers[2]
},
{
.attr = { .name = "profile4_buttons", .mode = 0440 },
- .size = sizeof(struct koneplus_profile_buttons),
+ .size = KONEPLUS_SIZE_PROFILE_BUTTONS,
.read = koneplus_sysfs_read_profilex_buttons,
.private = &profile_numbers[3]
},
{
.attr = { .name = "profile5_buttons", .mode = 0440 },
- .size = sizeof(struct koneplus_profile_buttons),
+ .size = KONEPLUS_SIZE_PROFILE_BUTTONS,
.read = koneplus_sysfs_read_profilex_buttons,
.private = &profile_numbers[4]
},
- {
- .attr = { .name = "macro", .mode = 0220 },
- .size = sizeof(struct koneplus_macro),
- .write = koneplus_sysfs_write_macro
- },
- {
- .attr = { .name = "talk", .mode = 0220 },
- .size = sizeof(struct koneplus_talk),
- .write = koneplus_sysfs_write_talk
- },
__ATTR_NULL
};
static int koneplus_init_koneplus_device_struct(struct usb_device *usb_dev,
struct koneplus_device *koneplus)
{
- int retval, i;
- static uint wait = 200;
+ int retval;
mutex_init(&koneplus->koneplus_lock);
- retval = koneplus_get_info(usb_dev, &koneplus->info);
- if (retval)
- return retval;
-
- for (i = 0; i < 5; ++i) {
- msleep(wait);
- retval = koneplus_get_profile_settings(usb_dev,
- &koneplus->profile_settings[i], i);
- if (retval)
- return retval;
-
- msleep(wait);
- retval = koneplus_get_profile_buttons(usb_dev,
- &koneplus->profile_buttons[i], i);
- if (retval)
- return retval;
- }
-
- msleep(wait);
retval = koneplus_get_actual_profile(usb_dev);
if (retval < 0)
return retval;
@@ -709,6 +550,7 @@
static const struct hid_device_id koneplus_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONEPLUS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONEXTD) },
{ }
};
@@ -749,5 +591,5 @@
module_exit(koneplus_exit);
MODULE_AUTHOR("Stefan Achatz");
-MODULE_DESCRIPTION("USB Roccat Kone[+] driver");
+MODULE_DESCRIPTION("USB Roccat Kone[+]/XTD driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/hid/hid-roccat-koneplus.h b/drivers/hid/hid-roccat-koneplus.h
index 7074b2a..af7f57e 100644
--- a/drivers/hid/hid-roccat-koneplus.h
+++ b/drivers/hid/hid-roccat-koneplus.h
@@ -14,11 +14,19 @@
#include <linux/types.h>
-struct koneplus_talk {
- uint8_t command; /* KONEPLUS_COMMAND_TALK */
- uint8_t size; /* always 0x10 */
- uint8_t data[14];
-} __packed;
+enum {
+ KONEPLUS_SIZE_ACTUAL_PROFILE = 0x03,
+ KONEPLUS_SIZE_CONTROL = 0x03,
+ KONEPLUS_SIZE_FIRMWARE_WRITE = 0x0402,
+ KONEPLUS_SIZE_INFO = 0x06,
+ KONEPLUS_SIZE_MACRO = 0x0822,
+ KONEPLUS_SIZE_PROFILE_SETTINGS = 0x2b,
+ KONEPLUS_SIZE_PROFILE_BUTTONS = 0x4d,
+ KONEPLUS_SIZE_SENSOR = 0x06,
+ KONEPLUS_SIZE_TALK = 0x10,
+ KONEPLUS_SIZE_TCU = 0x04,
+ KONEPLUS_SIZE_TCU_IMAGE = 0x0404,
+};
enum koneplus_control_requests {
KONEPLUS_CONTROL_REQUEST_PROFILE_SETTINGS = 0x80,
@@ -31,45 +39,6 @@
uint8_t actual_profile; /* Range 0-4! */
} __attribute__ ((__packed__));
-struct koneplus_profile_settings {
- uint8_t command; /* KONEPLUS_COMMAND_PROFILE_SETTINGS */
- uint8_t size; /* always 43 */
- uint8_t number; /* range 0-4 */
- uint8_t advanced_sensitivity;
- uint8_t sensitivity_x;
- uint8_t sensitivity_y;
- uint8_t cpi_levels_enabled;
- uint8_t cpi_levels_x[5];
- uint8_t cpi_startup_level; /* range 0-4 */
- uint8_t cpi_levels_y[5]; /* range 1-60 means 100-6000 cpi */
- uint8_t unknown1;
- uint8_t polling_rate;
- uint8_t lights_enabled;
- uint8_t light_effect_mode;
- uint8_t color_flow_effect;
- uint8_t light_effect_type;
- uint8_t light_effect_speed;
- uint8_t lights[16];
- uint16_t checksum;
-} __attribute__ ((__packed__));
-
-struct koneplus_profile_buttons {
- uint8_t command; /* KONEPLUS_COMMAND_PROFILE_BUTTONS */
- uint8_t size; /* always 77 */
- uint8_t number; /* range 0-4 */
- uint8_t data[72];
- uint16_t checksum;
-} __attribute__ ((__packed__));
-
-struct koneplus_macro {
- uint8_t command; /* KONEPLUS_COMMAND_MACRO */
- uint16_t size; /* always 0x822 little endian */
- uint8_t profile; /* range 0-4 */
- uint8_t button; /* range 0-23 */
- uint8_t data[2075];
- uint16_t checksum;
-} __attribute__ ((__packed__));
-
struct koneplus_info {
uint8_t command; /* KONEPLUS_COMMAND_INFO */
uint8_t size; /* always 6 */
@@ -77,51 +46,15 @@
uint8_t unknown[3];
} __attribute__ ((__packed__));
-struct koneplus_e {
- uint8_t command; /* KONEPLUS_COMMAND_E */
- uint8_t size; /* always 3 */
- uint8_t unknown; /* TODO 1; 0 before firmware update */
-} __attribute__ ((__packed__));
-
-struct koneplus_sensor {
- uint8_t command; /* KONEPLUS_COMMAND_SENSOR */
- uint8_t size; /* always 6 */
- uint8_t data[4];
-} __attribute__ ((__packed__));
-
-struct koneplus_firmware_write {
- uint8_t command; /* KONEPLUS_COMMAND_FIRMWARE_WRITE */
- uint8_t unknown[1025];
-} __attribute__ ((__packed__));
-
-struct koneplus_firmware_write_control {
- uint8_t command; /* KONEPLUS_COMMAND_FIRMWARE_WRITE_CONTROL */
- /*
- * value is 1 on success
- * 3 means "not finished yet"
- */
- uint8_t value;
- uint8_t unknown; /* always 0x75 */
-} __attribute__ ((__packed__));
-
-struct koneplus_tcu {
- uint16_t usb_command; /* KONEPLUS_USB_COMMAND_TCU */
- uint8_t data[2];
-} __attribute__ ((__packed__));
-
-struct koneplus_tcu_image {
- uint16_t usb_command; /* KONEPLUS_USB_COMMAND_TCU */
- uint8_t data[1024];
- uint16_t checksum;
-} __attribute__ ((__packed__));
-
enum koneplus_commands {
KONEPLUS_COMMAND_ACTUAL_PROFILE = 0x5,
+ KONEPLUS_COMMAND_CONTROL = 0x4,
KONEPLUS_COMMAND_PROFILE_SETTINGS = 0x6,
KONEPLUS_COMMAND_PROFILE_BUTTONS = 0x7,
KONEPLUS_COMMAND_MACRO = 0x8,
KONEPLUS_COMMAND_INFO = 0x9,
KONEPLUS_COMMAND_TCU = 0xc,
+ KONEPLUS_COMMAND_TCU_IMAGE = 0xc,
KONEPLUS_COMMAND_E = 0xe,
KONEPLUS_COMMAND_SENSOR = 0xf,
KONEPLUS_COMMAND_TALK = 0x10,
@@ -187,10 +120,6 @@
int chrdev_minor;
struct mutex koneplus_lock;
-
- struct koneplus_info info;
- struct koneplus_profile_settings profile_settings[5];
- struct koneplus_profile_buttons profile_buttons[5];
};
#endif
diff --git a/drivers/hid/hid-roccat-kovaplus.c b/drivers/hid/hid-roccat-kovaplus.c
index ca6527a..b8b3778 100644
--- a/drivers/hid/hid-roccat-kovaplus.c
+++ b/drivers/hid/hid-roccat-kovaplus.c
@@ -70,13 +70,6 @@
return kovaplus_send_control(usb_dev, number, request);
}
-static int kovaplus_get_info(struct usb_device *usb_dev,
- struct kovaplus_info *buf)
-{
- return roccat_common2_receive(usb_dev, KOVAPLUS_COMMAND_INFO,
- buf, sizeof(struct kovaplus_info));
-}
-
static int kovaplus_get_profile_settings(struct usb_device *usb_dev,
struct kovaplus_profile_settings *buf, uint number)
{
@@ -88,15 +81,7 @@
return retval;
return roccat_common2_receive(usb_dev, KOVAPLUS_COMMAND_PROFILE_SETTINGS,
- buf, sizeof(struct kovaplus_profile_settings));
-}
-
-static int kovaplus_set_profile_settings(struct usb_device *usb_dev,
- struct kovaplus_profile_settings const *settings)
-{
- return roccat_common2_send_with_status(usb_dev,
- KOVAPLUS_COMMAND_PROFILE_SETTINGS,
- settings, sizeof(struct kovaplus_profile_settings));
+ buf, KOVAPLUS_SIZE_PROFILE_SETTINGS);
}
static int kovaplus_get_profile_buttons(struct usb_device *usb_dev,
@@ -110,15 +95,7 @@
return retval;
return roccat_common2_receive(usb_dev, KOVAPLUS_COMMAND_PROFILE_BUTTONS,
- buf, sizeof(struct kovaplus_profile_buttons));
-}
-
-static int kovaplus_set_profile_buttons(struct usb_device *usb_dev,
- struct kovaplus_profile_buttons const *buttons)
-{
- return roccat_common2_send_with_status(usb_dev,
- KOVAPLUS_COMMAND_PROFILE_BUTTONS,
- buttons, sizeof(struct kovaplus_profile_buttons));
+ buf, KOVAPLUS_SIZE_PROFILE_BUTTONS);
}
/* retval is 0-4 on success, < 0 on error */
@@ -147,63 +124,122 @@
&buf, sizeof(struct kovaplus_actual_profile));
}
+static ssize_t kovaplus_sysfs_read(struct file *fp, struct kobject *kobj,
+ char *buf, loff_t off, size_t count,
+ size_t real_size, uint command)
+{
+ struct device *dev =
+ container_of(kobj, struct device, kobj)->parent->parent;
+ struct kovaplus_device *kovaplus = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int retval;
+
+ if (off >= real_size)
+ return 0;
+
+ if (off != 0 || count != real_size)
+ return -EINVAL;
+
+ mutex_lock(&kovaplus->kovaplus_lock);
+ retval = roccat_common2_receive(usb_dev, command, buf, real_size);
+ mutex_unlock(&kovaplus->kovaplus_lock);
+
+ if (retval)
+ return retval;
+
+ return real_size;
+}
+
+static ssize_t kovaplus_sysfs_write(struct file *fp, struct kobject *kobj,
+ void const *buf, loff_t off, size_t count,
+ size_t real_size, uint command)
+{
+ struct device *dev =
+ container_of(kobj, struct device, kobj)->parent->parent;
+ struct kovaplus_device *kovaplus = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int retval;
+
+ if (off != 0 || count != real_size)
+ return -EINVAL;
+
+ mutex_lock(&kovaplus->kovaplus_lock);
+ retval = roccat_common2_send_with_status(usb_dev, command,
+ buf, real_size);
+ mutex_unlock(&kovaplus->kovaplus_lock);
+
+ if (retval)
+ return retval;
+
+ return real_size;
+}
+
+#define KOVAPLUS_SYSFS_W(thingy, THINGY) \
+static ssize_t kovaplus_sysfs_write_ ## thingy(struct file *fp, \
+ struct kobject *kobj, struct bin_attribute *attr, char *buf, \
+ loff_t off, size_t count) \
+{ \
+ return kovaplus_sysfs_write(fp, kobj, buf, off, count, \
+ KOVAPLUS_SIZE_ ## THINGY, KOVAPLUS_COMMAND_ ## THINGY); \
+}
+
+#define KOVAPLUS_SYSFS_R(thingy, THINGY) \
+static ssize_t kovaplus_sysfs_read_ ## thingy(struct file *fp, \
+ struct kobject *kobj, struct bin_attribute *attr, char *buf, \
+ loff_t off, size_t count) \
+{ \
+ return kovaplus_sysfs_read(fp, kobj, buf, off, count, \
+ KOVAPLUS_SIZE_ ## THINGY, KOVAPLUS_COMMAND_ ## THINGY); \
+}
+
+#define KOVAPLUS_SYSFS_RW(thingy, THINGY) \
+KOVAPLUS_SYSFS_W(thingy, THINGY) \
+KOVAPLUS_SYSFS_R(thingy, THINGY)
+
+#define KOVAPLUS_BIN_ATTRIBUTE_RW(thingy, THINGY) \
+{ \
+ .attr = { .name = #thingy, .mode = 0660 }, \
+ .size = KOVAPLUS_SIZE_ ## THINGY, \
+ .read = kovaplus_sysfs_read_ ## thingy, \
+ .write = kovaplus_sysfs_write_ ## thingy \
+}
+
+#define KOVAPLUS_BIN_ATTRIBUTE_R(thingy, THINGY) \
+{ \
+ .attr = { .name = #thingy, .mode = 0440 }, \
+ .size = KOVAPLUS_SIZE_ ## THINGY, \
+ .read = kovaplus_sysfs_read_ ## thingy, \
+}
+
+#define KOVAPLUS_BIN_ATTRIBUTE_W(thingy, THINGY) \
+{ \
+ .attr = { .name = #thingy, .mode = 0220 }, \
+ .size = KOVAPLUS_SIZE_ ## THINGY, \
+ .write = kovaplus_sysfs_write_ ## thingy \
+}
+
+KOVAPLUS_SYSFS_W(control, CONTROL)
+KOVAPLUS_SYSFS_RW(info, INFO)
+KOVAPLUS_SYSFS_RW(profile_settings, PROFILE_SETTINGS)
+KOVAPLUS_SYSFS_RW(profile_buttons, PROFILE_BUTTONS)
+
static ssize_t kovaplus_sysfs_read_profilex_settings(struct file *fp,
struct kobject *kobj, struct bin_attribute *attr, char *buf,
loff_t off, size_t count)
{
struct device *dev =
container_of(kobj, struct device, kobj)->parent->parent;
- struct kovaplus_device *kovaplus = hid_get_drvdata(dev_get_drvdata(dev));
-
- if (off >= sizeof(struct kovaplus_profile_settings))
- return 0;
-
- if (off + count > sizeof(struct kovaplus_profile_settings))
- count = sizeof(struct kovaplus_profile_settings) - off;
-
- mutex_lock(&kovaplus->kovaplus_lock);
- memcpy(buf, ((char const *)&kovaplus->profile_settings[*(uint *)(attr->private)]) + off,
- count);
- mutex_unlock(&kovaplus->kovaplus_lock);
-
- return count;
-}
-
-static ssize_t kovaplus_sysfs_write_profile_settings(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- struct device *dev =
- container_of(kobj, struct device, kobj)->parent->parent;
- struct kovaplus_device *kovaplus = hid_get_drvdata(dev_get_drvdata(dev));
struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
- int retval = 0;
- int difference;
- int profile_index;
- struct kovaplus_profile_settings *profile_settings;
+ ssize_t retval;
- if (off != 0 || count != sizeof(struct kovaplus_profile_settings))
- return -EINVAL;
-
- profile_index = ((struct kovaplus_profile_settings const *)buf)->profile_index;
- profile_settings = &kovaplus->profile_settings[profile_index];
-
- mutex_lock(&kovaplus->kovaplus_lock);
- difference = memcmp(buf, profile_settings,
- sizeof(struct kovaplus_profile_settings));
- if (difference) {
- retval = kovaplus_set_profile_settings(usb_dev,
- (struct kovaplus_profile_settings const *)buf);
- if (!retval)
- memcpy(profile_settings, buf,
- sizeof(struct kovaplus_profile_settings));
- }
- mutex_unlock(&kovaplus->kovaplus_lock);
-
+ retval = kovaplus_select_profile(usb_dev, *(uint *)(attr->private),
+ KOVAPLUS_CONTROL_REQUEST_PROFILE_SETTINGS);
if (retval)
return retval;
- return sizeof(struct kovaplus_profile_settings);
+ return kovaplus_sysfs_read(fp, kobj, buf, off, count,
+ KOVAPLUS_SIZE_PROFILE_SETTINGS,
+ KOVAPLUS_COMMAND_PROFILE_SETTINGS);
}
static ssize_t kovaplus_sysfs_read_profilex_buttons(struct file *fp,
@@ -212,57 +248,17 @@
{
struct device *dev =
container_of(kobj, struct device, kobj)->parent->parent;
- struct kovaplus_device *kovaplus = hid_get_drvdata(dev_get_drvdata(dev));
-
- if (off >= sizeof(struct kovaplus_profile_buttons))
- return 0;
-
- if (off + count > sizeof(struct kovaplus_profile_buttons))
- count = sizeof(struct kovaplus_profile_buttons) - off;
-
- mutex_lock(&kovaplus->kovaplus_lock);
- memcpy(buf, ((char const *)&kovaplus->profile_buttons[*(uint *)(attr->private)]) + off,
- count);
- mutex_unlock(&kovaplus->kovaplus_lock);
-
- return count;
-}
-
-static ssize_t kovaplus_sysfs_write_profile_buttons(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- struct device *dev =
- container_of(kobj, struct device, kobj)->parent->parent;
- struct kovaplus_device *kovaplus = hid_get_drvdata(dev_get_drvdata(dev));
struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
- int retval = 0;
- int difference;
- uint profile_index;
- struct kovaplus_profile_buttons *profile_buttons;
+ ssize_t retval;
- if (off != 0 || count != sizeof(struct kovaplus_profile_buttons))
- return -EINVAL;
-
- profile_index = ((struct kovaplus_profile_buttons const *)buf)->profile_index;
- profile_buttons = &kovaplus->profile_buttons[profile_index];
-
- mutex_lock(&kovaplus->kovaplus_lock);
- difference = memcmp(buf, profile_buttons,
- sizeof(struct kovaplus_profile_buttons));
- if (difference) {
- retval = kovaplus_set_profile_buttons(usb_dev,
- (struct kovaplus_profile_buttons const *)buf);
- if (!retval)
- memcpy(profile_buttons, buf,
- sizeof(struct kovaplus_profile_buttons));
- }
- mutex_unlock(&kovaplus->kovaplus_lock);
-
+ retval = kovaplus_select_profile(usb_dev, *(uint *)(attr->private),
+ KOVAPLUS_CONTROL_REQUEST_PROFILE_BUTTONS);
if (retval)
return retval;
- return sizeof(struct kovaplus_profile_buttons);
+ return kovaplus_sysfs_read(fp, kobj, buf, off, count,
+ KOVAPLUS_SIZE_PROFILE_BUTTONS,
+ KOVAPLUS_COMMAND_PROFILE_BUTTONS);
}
static ssize_t kovaplus_sysfs_show_actual_profile(struct device *dev,
@@ -342,9 +338,20 @@
static ssize_t kovaplus_sysfs_show_firmware_version(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct kovaplus_device *kovaplus =
- hid_get_drvdata(dev_get_drvdata(dev->parent->parent));
- return snprintf(buf, PAGE_SIZE, "%d\n", kovaplus->info.firmware_version);
+ struct kovaplus_device *kovaplus;
+ struct usb_device *usb_dev;
+ struct kovaplus_info info;
+
+ dev = dev->parent->parent;
+ kovaplus = hid_get_drvdata(dev_get_drvdata(dev));
+ usb_dev = interface_to_usbdev(to_usb_interface(dev));
+
+ mutex_lock(&kovaplus->kovaplus_lock);
+ roccat_common2_receive(usb_dev, KOVAPLUS_COMMAND_INFO,
+ &info, KOVAPLUS_SIZE_INFO);
+ mutex_unlock(&kovaplus->kovaplus_lock);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", info.firmware_version);
}
static struct device_attribute kovaplus_attributes[] = {
@@ -363,73 +370,67 @@
};
static struct bin_attribute kovaplus_bin_attributes[] = {
- {
- .attr = { .name = "profile_settings", .mode = 0220 },
- .size = sizeof(struct kovaplus_profile_settings),
- .write = kovaplus_sysfs_write_profile_settings
- },
+ KOVAPLUS_BIN_ATTRIBUTE_W(control, CONTROL),
+ KOVAPLUS_BIN_ATTRIBUTE_RW(info, INFO),
+ KOVAPLUS_BIN_ATTRIBUTE_RW(profile_settings, PROFILE_SETTINGS),
+ KOVAPLUS_BIN_ATTRIBUTE_RW(profile_buttons, PROFILE_BUTTONS),
{
.attr = { .name = "profile1_settings", .mode = 0440 },
- .size = sizeof(struct kovaplus_profile_settings),
+ .size = KOVAPLUS_SIZE_PROFILE_SETTINGS,
.read = kovaplus_sysfs_read_profilex_settings,
.private = &profile_numbers[0]
},
{
.attr = { .name = "profile2_settings", .mode = 0440 },
- .size = sizeof(struct kovaplus_profile_settings),
+ .size = KOVAPLUS_SIZE_PROFILE_SETTINGS,
.read = kovaplus_sysfs_read_profilex_settings,
.private = &profile_numbers[1]
},
{
.attr = { .name = "profile3_settings", .mode = 0440 },
- .size = sizeof(struct kovaplus_profile_settings),
+ .size = KOVAPLUS_SIZE_PROFILE_SETTINGS,
.read = kovaplus_sysfs_read_profilex_settings,
.private = &profile_numbers[2]
},
{
.attr = { .name = "profile4_settings", .mode = 0440 },
- .size = sizeof(struct kovaplus_profile_settings),
+ .size = KOVAPLUS_SIZE_PROFILE_SETTINGS,
.read = kovaplus_sysfs_read_profilex_settings,
.private = &profile_numbers[3]
},
{
.attr = { .name = "profile5_settings", .mode = 0440 },
- .size = sizeof(struct kovaplus_profile_settings),
+ .size = KOVAPLUS_SIZE_PROFILE_SETTINGS,
.read = kovaplus_sysfs_read_profilex_settings,
.private = &profile_numbers[4]
},
{
- .attr = { .name = "profile_buttons", .mode = 0220 },
- .size = sizeof(struct kovaplus_profile_buttons),
- .write = kovaplus_sysfs_write_profile_buttons
- },
- {
.attr = { .name = "profile1_buttons", .mode = 0440 },
- .size = sizeof(struct kovaplus_profile_buttons),
+ .size = KOVAPLUS_SIZE_PROFILE_BUTTONS,
.read = kovaplus_sysfs_read_profilex_buttons,
.private = &profile_numbers[0]
},
{
.attr = { .name = "profile2_buttons", .mode = 0440 },
- .size = sizeof(struct kovaplus_profile_buttons),
+ .size = KOVAPLUS_SIZE_PROFILE_BUTTONS,
.read = kovaplus_sysfs_read_profilex_buttons,
.private = &profile_numbers[1]
},
{
.attr = { .name = "profile3_buttons", .mode = 0440 },
- .size = sizeof(struct kovaplus_profile_buttons),
+ .size = KOVAPLUS_SIZE_PROFILE_BUTTONS,
.read = kovaplus_sysfs_read_profilex_buttons,
.private = &profile_numbers[2]
},
{
.attr = { .name = "profile4_buttons", .mode = 0440 },
- .size = sizeof(struct kovaplus_profile_buttons),
+ .size = KOVAPLUS_SIZE_PROFILE_BUTTONS,
.read = kovaplus_sysfs_read_profilex_buttons,
.private = &profile_numbers[3]
},
{
.attr = { .name = "profile5_buttons", .mode = 0440 },
- .size = sizeof(struct kovaplus_profile_buttons),
+ .size = KOVAPLUS_SIZE_PROFILE_BUTTONS,
.read = kovaplus_sysfs_read_profilex_buttons,
.private = &profile_numbers[4]
},
@@ -444,10 +445,6 @@
mutex_init(&kovaplus->kovaplus_lock);
- retval = kovaplus_get_info(usb_dev, &kovaplus->info);
- if (retval)
- return retval;
-
for (i = 0; i < 5; ++i) {
msleep(wait);
retval = kovaplus_get_profile_settings(usb_dev,
diff --git a/drivers/hid/hid-roccat-kovaplus.h b/drivers/hid/hid-roccat-kovaplus.h
index f82daa1..fbb7a16 100644
--- a/drivers/hid/hid-roccat-kovaplus.h
+++ b/drivers/hid/hid-roccat-kovaplus.h
@@ -14,6 +14,13 @@
#include <linux/types.h>
+enum {
+ KOVAPLUS_SIZE_CONTROL = 0x03,
+ KOVAPLUS_SIZE_INFO = 0x06,
+ KOVAPLUS_SIZE_PROFILE_SETTINGS = 0x10,
+ KOVAPLUS_SIZE_PROFILE_BUTTONS = 0x17,
+};
+
enum kovaplus_control_requests {
/* write; value = profile number range 0-4 */
KOVAPLUS_CONTROL_REQUEST_PROFILE_SETTINGS = 0x10,
@@ -53,15 +60,9 @@
uint8_t unknown[3];
} __packed;
-/* writes 1 on plugin */
-struct kovaplus_a {
- uint8_t command; /* KOVAPLUS_COMMAND_A */
- uint8_t size; /* 3 */
- uint8_t unknown;
-} __packed;
-
enum kovaplus_commands {
KOVAPLUS_COMMAND_ACTUAL_PROFILE = 0x5,
+ KOVAPLUS_COMMAND_CONTROL = 0x4,
KOVAPLUS_COMMAND_PROFILE_SETTINGS = 0x6,
KOVAPLUS_COMMAND_PROFILE_BUTTONS = 0x7,
KOVAPLUS_COMMAND_INFO = 0x9,
@@ -125,7 +126,6 @@
int roccat_claimed;
int chrdev_minor;
struct mutex kovaplus_lock;
- struct kovaplus_info info;
struct kovaplus_profile_settings profile_settings[5];
struct kovaplus_profile_buttons profile_buttons[5];
};
diff --git a/drivers/hid/hid-roccat-lua.c b/drivers/hid/hid-roccat-lua.c
new file mode 100644
index 0000000..5084fb4
--- /dev/null
+++ b/drivers/hid/hid-roccat-lua.c
@@ -0,0 +1,227 @@
+/*
+ * Roccat Lua driver for Linux
+ *
+ * Copyright (c) 2012 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Roccat Lua is a gamer mouse which cpi, button and light settings can be
+ * configured.
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/hid-roccat.h>
+#include "hid-ids.h"
+#include "hid-roccat-common.h"
+#include "hid-roccat-lua.h"
+
+static ssize_t lua_sysfs_read(struct file *fp, struct kobject *kobj,
+ char *buf, loff_t off, size_t count,
+ size_t real_size, uint command)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct lua_device *lua = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int retval;
+
+ if (off >= real_size)
+ return 0;
+
+ if (off != 0 || count != real_size)
+ return -EINVAL;
+
+ mutex_lock(&lua->lua_lock);
+ retval = roccat_common2_receive(usb_dev, command, buf, real_size);
+ mutex_unlock(&lua->lua_lock);
+
+ return retval ? retval : real_size;
+}
+
+static ssize_t lua_sysfs_write(struct file *fp, struct kobject *kobj,
+ void const *buf, loff_t off, size_t count,
+ size_t real_size, uint command)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct lua_device *lua = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int retval;
+
+ if (off != 0 || count != real_size)
+ return -EINVAL;
+
+ mutex_lock(&lua->lua_lock);
+ retval = roccat_common2_send(usb_dev, command, (void *)buf, real_size);
+ mutex_unlock(&lua->lua_lock);
+
+ return retval ? retval : real_size;
+}
+
+#define LUA_SYSFS_W(thingy, THINGY) \
+static ssize_t lua_sysfs_write_ ## thingy(struct file *fp, \
+ struct kobject *kobj, struct bin_attribute *attr, \
+ char *buf, loff_t off, size_t count) \
+{ \
+ return lua_sysfs_write(fp, kobj, buf, off, count, \
+ LUA_SIZE_ ## THINGY, LUA_COMMAND_ ## THINGY); \
+}
+
+#define LUA_SYSFS_R(thingy, THINGY) \
+static ssize_t lua_sysfs_read_ ## thingy(struct file *fp, \
+ struct kobject *kobj, struct bin_attribute *attr, \
+ char *buf, loff_t off, size_t count) \
+{ \
+ return lua_sysfs_read(fp, kobj, buf, off, count, \
+ LUA_SIZE_ ## THINGY, LUA_COMMAND_ ## THINGY); \
+}
+
+#define LUA_BIN_ATTRIBUTE_RW(thingy, THINGY) \
+LUA_SYSFS_W(thingy, THINGY) \
+LUA_SYSFS_R(thingy, THINGY) \
+static struct bin_attribute lua_ ## thingy ## _attr = { \
+ .attr = { .name = #thingy, .mode = 0660 }, \
+ .size = LUA_SIZE_ ## THINGY, \
+ .read = lua_sysfs_read_ ## thingy, \
+ .write = lua_sysfs_write_ ## thingy \
+};
+
+LUA_BIN_ATTRIBUTE_RW(control, CONTROL)
+
+static int lua_create_sysfs_attributes(struct usb_interface *intf)
+{
+ return sysfs_create_bin_file(&intf->dev.kobj, &lua_control_attr);
+}
+
+static void lua_remove_sysfs_attributes(struct usb_interface *intf)
+{
+ sysfs_remove_bin_file(&intf->dev.kobj, &lua_control_attr);
+}
+
+static int lua_init_lua_device_struct(struct usb_device *usb_dev,
+ struct lua_device *lua)
+{
+ mutex_init(&lua->lua_lock);
+
+ return 0;
+}
+
+static int lua_init_specials(struct hid_device *hdev)
+{
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+ struct usb_device *usb_dev = interface_to_usbdev(intf);
+ struct lua_device *lua;
+ int retval;
+
+ lua = kzalloc(sizeof(*lua), GFP_KERNEL);
+ if (!lua) {
+ hid_err(hdev, "can't alloc device descriptor\n");
+ return -ENOMEM;
+ }
+ hid_set_drvdata(hdev, lua);
+
+ retval = lua_init_lua_device_struct(usb_dev, lua);
+ if (retval) {
+ hid_err(hdev, "couldn't init struct lua_device\n");
+ goto exit;
+ }
+
+ retval = lua_create_sysfs_attributes(intf);
+ if (retval) {
+ hid_err(hdev, "cannot create sysfs files\n");
+ goto exit;
+ }
+
+ return 0;
+exit:
+ kfree(lua);
+ return retval;
+}
+
+static void lua_remove_specials(struct hid_device *hdev)
+{
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+ struct lua_device *lua;
+
+ lua_remove_sysfs_attributes(intf);
+
+ lua = hid_get_drvdata(hdev);
+ kfree(lua);
+}
+
+static int lua_probe(struct hid_device *hdev,
+ const struct hid_device_id *id)
+{
+ int retval;
+
+ retval = hid_parse(hdev);
+ if (retval) {
+ hid_err(hdev, "parse failed\n");
+ goto exit;
+ }
+
+ retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (retval) {
+ hid_err(hdev, "hw start failed\n");
+ goto exit;
+ }
+
+ retval = lua_init_specials(hdev);
+ if (retval) {
+ hid_err(hdev, "couldn't install mouse\n");
+ goto exit_stop;
+ }
+
+ return 0;
+
+exit_stop:
+ hid_hw_stop(hdev);
+exit:
+ return retval;
+}
+
+static void lua_remove(struct hid_device *hdev)
+{
+ lua_remove_specials(hdev);
+ hid_hw_stop(hdev);
+}
+
+static const struct hid_device_id lua_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_LUA) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(hid, lua_devices);
+
+static struct hid_driver lua_driver = {
+ .name = "lua",
+ .id_table = lua_devices,
+ .probe = lua_probe,
+ .remove = lua_remove
+};
+
+static int __init lua_init(void)
+{
+ return hid_register_driver(&lua_driver);
+}
+
+static void __exit lua_exit(void)
+{
+ hid_unregister_driver(&lua_driver);
+}
+
+module_init(lua_init);
+module_exit(lua_exit);
+
+MODULE_AUTHOR("Stefan Achatz");
+MODULE_DESCRIPTION("USB Roccat Lua driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hid/hid-roccat-lua.h b/drivers/hid/hid-roccat-lua.h
new file mode 100644
index 0000000..547d77a3
--- /dev/null
+++ b/drivers/hid/hid-roccat-lua.h
@@ -0,0 +1,29 @@
+#ifndef __HID_ROCCAT_LUA_H
+#define __HID_ROCCAT_LUA_H
+
+/*
+ * Copyright (c) 2012 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/types.h>
+
+enum {
+ LUA_SIZE_CONTROL = 8,
+};
+
+enum lua_commands {
+ LUA_COMMAND_CONTROL = 3,
+};
+
+struct lua_device {
+ struct mutex lua_lock;
+};
+
+#endif
diff --git a/drivers/hid/hid-roccat-pyra.c b/drivers/hid/hid-roccat-pyra.c
index 1317c17..d4f1e3b 100644
--- a/drivers/hid/hid-roccat-pyra.c
+++ b/drivers/hid/hid-roccat-pyra.c
@@ -66,48 +66,14 @@
if (retval)
return retval;
return roccat_common2_receive(usb_dev, PYRA_COMMAND_PROFILE_SETTINGS,
- buf, sizeof(struct pyra_profile_settings));
-}
-
-static int pyra_get_profile_buttons(struct usb_device *usb_dev,
- struct pyra_profile_buttons *buf, int number)
-{
- int retval;
- retval = pyra_send_control(usb_dev, number,
- PYRA_CONTROL_REQUEST_PROFILE_BUTTONS);
- if (retval)
- return retval;
- return roccat_common2_receive(usb_dev, PYRA_COMMAND_PROFILE_BUTTONS,
- buf, sizeof(struct pyra_profile_buttons));
+ buf, PYRA_SIZE_PROFILE_SETTINGS);
}
static int pyra_get_settings(struct usb_device *usb_dev,
struct pyra_settings *buf)
{
return roccat_common2_receive(usb_dev, PYRA_COMMAND_SETTINGS,
- buf, sizeof(struct pyra_settings));
-}
-
-static int pyra_get_info(struct usb_device *usb_dev, struct pyra_info *buf)
-{
- return roccat_common2_receive(usb_dev, PYRA_COMMAND_INFO,
- buf, sizeof(struct pyra_info));
-}
-
-static int pyra_set_profile_settings(struct usb_device *usb_dev,
- struct pyra_profile_settings const *settings)
-{
- return roccat_common2_send_with_status(usb_dev,
- PYRA_COMMAND_PROFILE_SETTINGS, settings,
- sizeof(struct pyra_profile_settings));
-}
-
-static int pyra_set_profile_buttons(struct usb_device *usb_dev,
- struct pyra_profile_buttons const *buttons)
-{
- return roccat_common2_send_with_status(usb_dev,
- PYRA_COMMAND_PROFILE_BUTTONS, buttons,
- sizeof(struct pyra_profile_buttons));
+ buf, PYRA_SIZE_SETTINGS);
}
static int pyra_set_settings(struct usb_device *usb_dev,
@@ -115,29 +81,125 @@
{
return roccat_common2_send_with_status(usb_dev,
PYRA_COMMAND_SETTINGS, settings,
- sizeof(struct pyra_settings));
+ PYRA_SIZE_SETTINGS);
}
+static ssize_t pyra_sysfs_read(struct file *fp, struct kobject *kobj,
+ char *buf, loff_t off, size_t count,
+ size_t real_size, uint command)
+{
+ struct device *dev =
+ container_of(kobj, struct device, kobj)->parent->parent;
+ struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int retval;
+
+ if (off >= real_size)
+ return 0;
+
+ if (off != 0 || count != real_size)
+ return -EINVAL;
+
+ mutex_lock(&pyra->pyra_lock);
+ retval = roccat_common2_receive(usb_dev, command, buf, real_size);
+ mutex_unlock(&pyra->pyra_lock);
+
+ if (retval)
+ return retval;
+
+ return real_size;
+}
+
+static ssize_t pyra_sysfs_write(struct file *fp, struct kobject *kobj,
+ void const *buf, loff_t off, size_t count,
+ size_t real_size, uint command)
+{
+ struct device *dev =
+ container_of(kobj, struct device, kobj)->parent->parent;
+ struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int retval;
+
+ if (off != 0 || count != real_size)
+ return -EINVAL;
+
+ mutex_lock(&pyra->pyra_lock);
+ retval = roccat_common2_send_with_status(usb_dev, command, (void *)buf, real_size);
+ mutex_unlock(&pyra->pyra_lock);
+
+ if (retval)
+ return retval;
+
+ return real_size;
+}
+
+#define PYRA_SYSFS_W(thingy, THINGY) \
+static ssize_t pyra_sysfs_write_ ## thingy(struct file *fp, \
+ struct kobject *kobj, struct bin_attribute *attr, char *buf, \
+ loff_t off, size_t count) \
+{ \
+ return pyra_sysfs_write(fp, kobj, buf, off, count, \
+ PYRA_SIZE_ ## THINGY, PYRA_COMMAND_ ## THINGY); \
+}
+
+#define PYRA_SYSFS_R(thingy, THINGY) \
+static ssize_t pyra_sysfs_read_ ## thingy(struct file *fp, \
+ struct kobject *kobj, struct bin_attribute *attr, char *buf, \
+ loff_t off, size_t count) \
+{ \
+ return pyra_sysfs_read(fp, kobj, buf, off, count, \
+ PYRA_SIZE_ ## THINGY, PYRA_COMMAND_ ## THINGY); \
+}
+
+#define PYRA_SYSFS_RW(thingy, THINGY) \
+PYRA_SYSFS_W(thingy, THINGY) \
+PYRA_SYSFS_R(thingy, THINGY)
+
+#define PYRA_BIN_ATTRIBUTE_RW(thingy, THINGY) \
+{ \
+ .attr = { .name = #thingy, .mode = 0660 }, \
+ .size = PYRA_SIZE_ ## THINGY, \
+ .read = pyra_sysfs_read_ ## thingy, \
+ .write = pyra_sysfs_write_ ## thingy \
+}
+
+#define PYRA_BIN_ATTRIBUTE_R(thingy, THINGY) \
+{ \
+ .attr = { .name = #thingy, .mode = 0440 }, \
+ .size = PYRA_SIZE_ ## THINGY, \
+ .read = pyra_sysfs_read_ ## thingy, \
+}
+
+#define PYRA_BIN_ATTRIBUTE_W(thingy, THINGY) \
+{ \
+ .attr = { .name = #thingy, .mode = 0220 }, \
+ .size = PYRA_SIZE_ ## THINGY, \
+ .write = pyra_sysfs_write_ ## thingy \
+}
+
+PYRA_SYSFS_W(control, CONTROL)
+PYRA_SYSFS_RW(info, INFO)
+PYRA_SYSFS_RW(profile_settings, PROFILE_SETTINGS)
+PYRA_SYSFS_RW(profile_buttons, PROFILE_BUTTONS)
+PYRA_SYSFS_R(settings, SETTINGS)
+
static ssize_t pyra_sysfs_read_profilex_settings(struct file *fp,
struct kobject *kobj, struct bin_attribute *attr, char *buf,
loff_t off, size_t count)
{
struct device *dev =
container_of(kobj, struct device, kobj)->parent->parent;
- struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ ssize_t retval;
- if (off >= sizeof(struct pyra_profile_settings))
- return 0;
+ retval = pyra_send_control(usb_dev, *(uint *)(attr->private),
+ PYRA_CONTROL_REQUEST_PROFILE_SETTINGS);
+ if (retval)
+ return retval;
- if (off + count > sizeof(struct pyra_profile_settings))
- count = sizeof(struct pyra_profile_settings) - off;
-
- mutex_lock(&pyra->pyra_lock);
- memcpy(buf, ((char const *)&pyra->profile_settings[*(uint *)(attr->private)]) + off,
- count);
- mutex_unlock(&pyra->pyra_lock);
-
- return count;
+ return pyra_sysfs_read(fp, kobj, buf, off, count,
+ PYRA_SIZE_PROFILE_SETTINGS,
+ PYRA_COMMAND_PROFILE_SETTINGS);
}
static ssize_t pyra_sysfs_read_profilex_buttons(struct file *fp,
@@ -146,115 +208,17 @@
{
struct device *dev =
container_of(kobj, struct device, kobj)->parent->parent;
- struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev));
-
- if (off >= sizeof(struct pyra_profile_buttons))
- return 0;
-
- if (off + count > sizeof(struct pyra_profile_buttons))
- count = sizeof(struct pyra_profile_buttons) - off;
-
- mutex_lock(&pyra->pyra_lock);
- memcpy(buf, ((char const *)&pyra->profile_buttons[*(uint *)(attr->private)]) + off,
- count);
- mutex_unlock(&pyra->pyra_lock);
-
- return count;
-}
-
-static ssize_t pyra_sysfs_write_profile_settings(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- struct device *dev =
- container_of(kobj, struct device, kobj)->parent->parent;
- struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev));
struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
- int retval = 0;
- int difference;
- int profile_number;
- struct pyra_profile_settings *profile_settings;
+ ssize_t retval;
- if (off != 0 || count != sizeof(struct pyra_profile_settings))
- return -EINVAL;
-
- profile_number = ((struct pyra_profile_settings const *)buf)->number;
- profile_settings = &pyra->profile_settings[profile_number];
-
- mutex_lock(&pyra->pyra_lock);
- difference = memcmp(buf, profile_settings,
- sizeof(struct pyra_profile_settings));
- if (difference) {
- retval = pyra_set_profile_settings(usb_dev,
- (struct pyra_profile_settings const *)buf);
- if (!retval)
- memcpy(profile_settings, buf,
- sizeof(struct pyra_profile_settings));
- }
- mutex_unlock(&pyra->pyra_lock);
-
+ retval = pyra_send_control(usb_dev, *(uint *)(attr->private),
+ PYRA_CONTROL_REQUEST_PROFILE_BUTTONS);
if (retval)
return retval;
- return sizeof(struct pyra_profile_settings);
-}
-
-static ssize_t pyra_sysfs_write_profile_buttons(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- struct device *dev =
- container_of(kobj, struct device, kobj)->parent->parent;
- struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev));
- struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
- int retval = 0;
- int difference;
- int profile_number;
- struct pyra_profile_buttons *profile_buttons;
-
- if (off != 0 || count != sizeof(struct pyra_profile_buttons))
- return -EINVAL;
-
- profile_number = ((struct pyra_profile_buttons const *)buf)->number;
- profile_buttons = &pyra->profile_buttons[profile_number];
-
- mutex_lock(&pyra->pyra_lock);
- difference = memcmp(buf, profile_buttons,
- sizeof(struct pyra_profile_buttons));
- if (difference) {
- retval = pyra_set_profile_buttons(usb_dev,
- (struct pyra_profile_buttons const *)buf);
- if (!retval)
- memcpy(profile_buttons, buf,
- sizeof(struct pyra_profile_buttons));
- }
- mutex_unlock(&pyra->pyra_lock);
-
- if (retval)
- return retval;
-
- return sizeof(struct pyra_profile_buttons);
-}
-
-static ssize_t pyra_sysfs_read_settings(struct file *fp,
- struct kobject *kobj, struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- struct device *dev =
- container_of(kobj, struct device, kobj)->parent->parent;
- struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev));
-
- if (off >= sizeof(struct pyra_settings))
- return 0;
-
- if (off + count > sizeof(struct pyra_settings))
- count = sizeof(struct pyra_settings) - off;
-
- mutex_lock(&pyra->pyra_lock);
- memcpy(buf, ((char const *)&pyra->settings) + off, count);
- mutex_unlock(&pyra->pyra_lock);
-
- return count;
+ return pyra_sysfs_read(fp, kobj, buf, off, count,
+ PYRA_SIZE_PROFILE_BUTTONS,
+ PYRA_COMMAND_PROFILE_BUTTONS);
}
static ssize_t pyra_sysfs_write_settings(struct file *fp,
@@ -266,35 +230,32 @@
struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev));
struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
int retval = 0;
- int difference;
struct pyra_roccat_report roccat_report;
+ struct pyra_settings const *settings;
- if (off != 0 || count != sizeof(struct pyra_settings))
+ if (off != 0 || count != PYRA_SIZE_SETTINGS)
return -EINVAL;
mutex_lock(&pyra->pyra_lock);
- difference = memcmp(buf, &pyra->settings, sizeof(struct pyra_settings));
- if (difference) {
- retval = pyra_set_settings(usb_dev,
- (struct pyra_settings const *)buf);
- if (retval) {
- mutex_unlock(&pyra->pyra_lock);
- return retval;
- }
- memcpy(&pyra->settings, buf,
- sizeof(struct pyra_settings));
+ settings = (struct pyra_settings const *)buf;
- profile_activated(pyra, pyra->settings.startup_profile);
-
- roccat_report.type = PYRA_MOUSE_EVENT_BUTTON_TYPE_PROFILE_2;
- roccat_report.value = pyra->settings.startup_profile + 1;
- roccat_report.key = 0;
- roccat_report_event(pyra->chrdev_minor,
- (uint8_t const *)&roccat_report);
+ retval = pyra_set_settings(usb_dev, settings);
+ if (retval) {
+ mutex_unlock(&pyra->pyra_lock);
+ return retval;
}
+
+ profile_activated(pyra, settings->startup_profile);
+
+ roccat_report.type = PYRA_MOUSE_EVENT_BUTTON_TYPE_PROFILE_2;
+ roccat_report.value = settings->startup_profile + 1;
+ roccat_report.key = 0;
+ roccat_report_event(pyra->chrdev_minor,
+ (uint8_t const *)&roccat_report);
+
mutex_unlock(&pyra->pyra_lock);
- return sizeof(struct pyra_settings);
+ return PYRA_SIZE_SETTINGS;
}
@@ -311,23 +272,34 @@
{
struct pyra_device *pyra =
hid_get_drvdata(dev_get_drvdata(dev->parent->parent));
- return snprintf(buf, PAGE_SIZE, "%d\n", pyra->actual_profile);
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ struct pyra_settings settings;
+
+ mutex_lock(&pyra->pyra_lock);
+ roccat_common2_receive(usb_dev, PYRA_COMMAND_SETTINGS,
+ &settings, PYRA_SIZE_SETTINGS);
+ mutex_unlock(&pyra->pyra_lock);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", settings.startup_profile);
}
static ssize_t pyra_sysfs_show_firmware_version(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct pyra_device *pyra =
- hid_get_drvdata(dev_get_drvdata(dev->parent->parent));
- return snprintf(buf, PAGE_SIZE, "%d\n", pyra->firmware_version);
-}
+ struct pyra_device *pyra;
+ struct usb_device *usb_dev;
+ struct pyra_info info;
-static ssize_t pyra_sysfs_show_startup_profile(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct pyra_device *pyra =
- hid_get_drvdata(dev_get_drvdata(dev->parent->parent));
- return snprintf(buf, PAGE_SIZE, "%d\n", pyra->settings.startup_profile);
+ dev = dev->parent->parent;
+ pyra = hid_get_drvdata(dev_get_drvdata(dev));
+ usb_dev = interface_to_usbdev(to_usb_interface(dev));
+
+ mutex_lock(&pyra->pyra_lock);
+ roccat_common2_receive(usb_dev, PYRA_COMMAND_INFO,
+ &info, PYRA_SIZE_INFO);
+ mutex_unlock(&pyra->pyra_lock);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", info.firmware_version);
}
static struct device_attribute pyra_attributes[] = {
@@ -336,105 +308,88 @@
__ATTR(firmware_version, 0440,
pyra_sysfs_show_firmware_version, NULL),
__ATTR(startup_profile, 0440,
- pyra_sysfs_show_startup_profile, NULL),
+ pyra_sysfs_show_actual_profile, NULL),
__ATTR_NULL
};
static struct bin_attribute pyra_bin_attributes[] = {
- {
- .attr = { .name = "profile_settings", .mode = 0220 },
- .size = sizeof(struct pyra_profile_settings),
- .write = pyra_sysfs_write_profile_settings
- },
+ PYRA_BIN_ATTRIBUTE_W(control, CONTROL),
+ PYRA_BIN_ATTRIBUTE_RW(info, INFO),
+ PYRA_BIN_ATTRIBUTE_RW(profile_settings, PROFILE_SETTINGS),
+ PYRA_BIN_ATTRIBUTE_RW(profile_buttons, PROFILE_BUTTONS),
+ PYRA_BIN_ATTRIBUTE_RW(settings, SETTINGS),
{
.attr = { .name = "profile1_settings", .mode = 0440 },
- .size = sizeof(struct pyra_profile_settings),
+ .size = PYRA_SIZE_PROFILE_SETTINGS,
.read = pyra_sysfs_read_profilex_settings,
.private = &profile_numbers[0]
},
{
.attr = { .name = "profile2_settings", .mode = 0440 },
- .size = sizeof(struct pyra_profile_settings),
+ .size = PYRA_SIZE_PROFILE_SETTINGS,
.read = pyra_sysfs_read_profilex_settings,
.private = &profile_numbers[1]
},
{
.attr = { .name = "profile3_settings", .mode = 0440 },
- .size = sizeof(struct pyra_profile_settings),
+ .size = PYRA_SIZE_PROFILE_SETTINGS,
.read = pyra_sysfs_read_profilex_settings,
.private = &profile_numbers[2]
},
{
.attr = { .name = "profile4_settings", .mode = 0440 },
- .size = sizeof(struct pyra_profile_settings),
+ .size = PYRA_SIZE_PROFILE_SETTINGS,
.read = pyra_sysfs_read_profilex_settings,
.private = &profile_numbers[3]
},
{
.attr = { .name = "profile5_settings", .mode = 0440 },
- .size = sizeof(struct pyra_profile_settings),
+ .size = PYRA_SIZE_PROFILE_SETTINGS,
.read = pyra_sysfs_read_profilex_settings,
.private = &profile_numbers[4]
},
{
- .attr = { .name = "profile_buttons", .mode = 0220 },
- .size = sizeof(struct pyra_profile_buttons),
- .write = pyra_sysfs_write_profile_buttons
- },
- {
.attr = { .name = "profile1_buttons", .mode = 0440 },
- .size = sizeof(struct pyra_profile_buttons),
+ .size = PYRA_SIZE_PROFILE_BUTTONS,
.read = pyra_sysfs_read_profilex_buttons,
.private = &profile_numbers[0]
},
{
.attr = { .name = "profile2_buttons", .mode = 0440 },
- .size = sizeof(struct pyra_profile_buttons),
+ .size = PYRA_SIZE_PROFILE_BUTTONS,
.read = pyra_sysfs_read_profilex_buttons,
.private = &profile_numbers[1]
},
{
.attr = { .name = "profile3_buttons", .mode = 0440 },
- .size = sizeof(struct pyra_profile_buttons),
+ .size = PYRA_SIZE_PROFILE_BUTTONS,
.read = pyra_sysfs_read_profilex_buttons,
.private = &profile_numbers[2]
},
{
.attr = { .name = "profile4_buttons", .mode = 0440 },
- .size = sizeof(struct pyra_profile_buttons),
+ .size = PYRA_SIZE_PROFILE_BUTTONS,
.read = pyra_sysfs_read_profilex_buttons,
.private = &profile_numbers[3]
},
{
.attr = { .name = "profile5_buttons", .mode = 0440 },
- .size = sizeof(struct pyra_profile_buttons),
+ .size = PYRA_SIZE_PROFILE_BUTTONS,
.read = pyra_sysfs_read_profilex_buttons,
.private = &profile_numbers[4]
},
- {
- .attr = { .name = "settings", .mode = 0660 },
- .size = sizeof(struct pyra_settings),
- .read = pyra_sysfs_read_settings,
- .write = pyra_sysfs_write_settings
- },
__ATTR_NULL
};
static int pyra_init_pyra_device_struct(struct usb_device *usb_dev,
struct pyra_device *pyra)
{
- struct pyra_info info;
+ struct pyra_settings settings;
int retval, i;
mutex_init(&pyra->pyra_lock);
- retval = pyra_get_info(usb_dev, &info);
- if (retval)
- return retval;
-
- pyra->firmware_version = info.firmware_version;
-
- retval = pyra_get_settings(usb_dev, &pyra->settings);
+ retval = pyra_get_settings(usb_dev, &settings);
if (retval)
return retval;
@@ -443,14 +398,9 @@
&pyra->profile_settings[i], i);
if (retval)
return retval;
-
- retval = pyra_get_profile_buttons(usb_dev,
- &pyra->profile_buttons[i], i);
- if (retval)
- return retval;
}
- profile_activated(pyra, pyra->settings.startup_profile);
+ profile_activated(pyra, settings.startup_profile);
return 0;
}
diff --git a/drivers/hid/hid-roccat-pyra.h b/drivers/hid/hid-roccat-pyra.h
index eada783..beedcf0 100644
--- a/drivers/hid/hid-roccat-pyra.h
+++ b/drivers/hid/hid-roccat-pyra.h
@@ -14,11 +14,13 @@
#include <linux/types.h>
-struct pyra_b {
- uint8_t command; /* PYRA_COMMAND_B */
- uint8_t size; /* always 3 */
- uint8_t unknown; /* 1 */
-} __attribute__ ((__packed__));
+enum {
+ PYRA_SIZE_CONTROL = 0x03,
+ PYRA_SIZE_INFO = 0x06,
+ PYRA_SIZE_PROFILE_SETTINGS = 0x0d,
+ PYRA_SIZE_PROFILE_BUTTONS = 0x13,
+ PYRA_SIZE_SETTINGS = 0x03,
+};
enum pyra_control_requests {
PYRA_CONTROL_REQUEST_PROFILE_SETTINGS = 0x10,
@@ -46,14 +48,6 @@
uint16_t checksum; /* byte sum */
} __attribute__ ((__packed__));
-struct pyra_profile_buttons {
- uint8_t command; /* PYRA_COMMAND_PROFILE_BUTTONS */
- uint8_t size; /* always 0x13 */
- uint8_t number; /* Range 0-4 */
- uint8_t buttons[14];
- uint16_t checksum; /* byte sum */
-} __attribute__ ((__packed__));
-
struct pyra_info {
uint8_t command; /* PYRA_COMMAND_INFO */
uint8_t size; /* always 6 */
@@ -64,6 +58,7 @@
} __attribute__ ((__packed__));
enum pyra_commands {
+ PYRA_COMMAND_CONTROL = 0x4,
PYRA_COMMAND_SETTINGS = 0x5,
PYRA_COMMAND_PROFILE_SETTINGS = 0x6,
PYRA_COMMAND_PROFILE_BUTTONS = 0x7,
@@ -148,13 +143,10 @@
struct pyra_device {
int actual_profile;
int actual_cpi;
- int firmware_version;
int roccat_claimed;
int chrdev_minor;
struct mutex pyra_lock;
- struct pyra_settings settings;
struct pyra_profile_settings profile_settings[5];
- struct pyra_profile_buttons profile_buttons[5];
};
#endif
diff --git a/drivers/hid/hid-roccat-savu.c b/drivers/hid/hid-roccat-savu.c
index 014afba..31747a2 100644
--- a/drivers/hid/hid-roccat-savu.c
+++ b/drivers/hid/hid-roccat-savu.c
@@ -120,7 +120,7 @@
SAVU_SYSFS_RW(general, GENERAL)
SAVU_SYSFS_RW(buttons, BUTTONS)
SAVU_SYSFS_RW(macro, MACRO)
-SAVU_SYSFS_R(info, INFO)
+SAVU_SYSFS_RW(info, INFO)
SAVU_SYSFS_RW(sensor, SENSOR)
static struct bin_attribute savu_bin_attributes[] = {
@@ -129,7 +129,7 @@
SAVU_BIN_ATTRIBUTE_RW(general, GENERAL),
SAVU_BIN_ATTRIBUTE_RW(buttons, BUTTONS),
SAVU_BIN_ATTRIBUTE_RW(macro, MACRO),
- SAVU_BIN_ATTRIBUTE_R(info, INFO),
+ SAVU_BIN_ATTRIBUTE_RW(info, INFO),
SAVU_BIN_ATTRIBUTE_RW(sensor, SENSOR),
__ATTR_NULL
};
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index ca88ddc..0bc58bd 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -420,9 +420,6 @@
ptr = raw_data;
ptr++; /*Skip report id*/
- if (!report)
- goto err_report;
-
spin_lock_irqsave(&pdata->lock, flags);
for (i = 0; i < report->maxfield; ++i) {
@@ -468,7 +465,6 @@
callback->pdev);
spin_unlock_irqrestore(&pdata->lock, flags);
-err_report:
return 1;
}
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 7c47fc3..413a731 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -57,10 +57,6 @@
set_current_state(TASK_INTERRUPTIBLE);
while (list->head == list->tail) {
- if (file->f_flags & O_NONBLOCK) {
- ret = -EAGAIN;
- break;
- }
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
@@ -69,6 +65,10 @@
ret = -EIO;
break;
}
+ if (file->f_flags & O_NONBLOCK) {
+ ret = -EAGAIN;
+ break;
+ }
/* allow O_NONBLOCK to work well from other threads */
mutex_unlock(&list->read_mutex);
@@ -295,6 +295,13 @@
}
+static int hidraw_fasync(int fd, struct file *file, int on)
+{
+ struct hidraw_list *list = file->private_data;
+
+ return fasync_helper(fd, file, on, &list->fasync);
+}
+
static int hidraw_release(struct inode * inode, struct file * file)
{
unsigned int minor = iminor(inode);
@@ -438,6 +445,7 @@
.open = hidraw_open,
.release = hidraw_release,
.unlocked_ioctl = hidraw_ioctl,
+ .fasync = hidraw_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = hidraw_ioctl,
#endif
diff --git a/drivers/hid/i2c-hid/Kconfig b/drivers/hid/i2c-hid/Kconfig
new file mode 100644
index 0000000..b66617a
--- /dev/null
+++ b/drivers/hid/i2c-hid/Kconfig
@@ -0,0 +1,18 @@
+menu "I2C HID support"
+ depends on I2C
+
+config I2C_HID
+ tristate "HID over I2C transport layer"
+ default n
+ depends on I2C && INPUT
+ select HID
+ ---help---
+ Say Y here if you use a keyboard, a touchpad, a touchscreen, or any
+ other HID based devices which is connected to your computer via I2C.
+
+ If unsure, say N.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-hid.
+
+endmenu
diff --git a/drivers/hid/i2c-hid/Makefile b/drivers/hid/i2c-hid/Makefile
new file mode 100644
index 0000000..832d8f9
--- /dev/null
+++ b/drivers/hid/i2c-hid/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the I2C input drivers
+#
+
+obj-$(CONFIG_I2C_HID) += i2c-hid.o
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
new file mode 100644
index 0000000..9ef22244
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -0,0 +1,979 @@
+/*
+ * HID over I2C protocol implementation
+ *
+ * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
+ * Copyright (c) 2012 Red Hat, Inc
+ *
+ * This code is partly based on "USB HID support for Linux":
+ *
+ * Copyright (c) 1999 Andreas Gal
+ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ * Copyright (c) 2007-2008 Oliver Neukum
+ * Copyright (c) 2006-2010 Jiri Kosina
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/hid.h>
+#include <linux/mutex.h>
+
+#include <linux/i2c/i2c-hid.h>
+
+/* flags */
+#define I2C_HID_STARTED (1 << 0)
+#define I2C_HID_RESET_PENDING (1 << 1)
+#define I2C_HID_READ_PENDING (1 << 2)
+
+#define I2C_HID_PWR_ON 0x00
+#define I2C_HID_PWR_SLEEP 0x01
+
+/* debug option */
+static bool debug;
+module_param(debug, bool, 0444);
+MODULE_PARM_DESC(debug, "print a lot of debug information");
+
+#define i2c_hid_dbg(ihid, fmt, arg...) \
+do { \
+ if (debug) \
+ dev_printk(KERN_DEBUG, &(ihid)->client->dev, fmt, ##arg); \
+} while (0)
+
+struct i2c_hid_desc {
+ __le16 wHIDDescLength;
+ __le16 bcdVersion;
+ __le16 wReportDescLength;
+ __le16 wReportDescRegister;
+ __le16 wInputRegister;
+ __le16 wMaxInputLength;
+ __le16 wOutputRegister;
+ __le16 wMaxOutputLength;
+ __le16 wCommandRegister;
+ __le16 wDataRegister;
+ __le16 wVendorID;
+ __le16 wProductID;
+ __le16 wVersionID;
+ __le32 reserved;
+} __packed;
+
+struct i2c_hid_cmd {
+ unsigned int registerIndex;
+ __u8 opcode;
+ unsigned int length;
+ bool wait;
+};
+
+union command {
+ u8 data[0];
+ struct cmd {
+ __le16 reg;
+ __u8 reportTypeID;
+ __u8 opcode;
+ } __packed c;
+};
+
+#define I2C_HID_CMD(opcode_) \
+ .opcode = opcode_, .length = 4, \
+ .registerIndex = offsetof(struct i2c_hid_desc, wCommandRegister)
+
+/* fetch HID descriptor */
+static const struct i2c_hid_cmd hid_descr_cmd = { .length = 2 };
+/* fetch report descriptors */
+static const struct i2c_hid_cmd hid_report_descr_cmd = {
+ .registerIndex = offsetof(struct i2c_hid_desc,
+ wReportDescRegister),
+ .opcode = 0x00,
+ .length = 2 };
+/* commands */
+static const struct i2c_hid_cmd hid_reset_cmd = { I2C_HID_CMD(0x01),
+ .wait = true };
+static const struct i2c_hid_cmd hid_get_report_cmd = { I2C_HID_CMD(0x02) };
+static const struct i2c_hid_cmd hid_set_report_cmd = { I2C_HID_CMD(0x03) };
+static const struct i2c_hid_cmd hid_set_power_cmd = { I2C_HID_CMD(0x08) };
+
+/*
+ * These definitions are not used here, but are defined by the spec.
+ * Keeping them here for documentation purposes.
+ *
+ * static const struct i2c_hid_cmd hid_get_idle_cmd = { I2C_HID_CMD(0x04) };
+ * static const struct i2c_hid_cmd hid_set_idle_cmd = { I2C_HID_CMD(0x05) };
+ * static const struct i2c_hid_cmd hid_get_protocol_cmd = { I2C_HID_CMD(0x06) };
+ * static const struct i2c_hid_cmd hid_set_protocol_cmd = { I2C_HID_CMD(0x07) };
+ */
+
+static DEFINE_MUTEX(i2c_hid_open_mut);
+
+/* The main device structure */
+struct i2c_hid {
+ struct i2c_client *client; /* i2c client */
+ struct hid_device *hid; /* pointer to corresponding HID dev */
+ union {
+ __u8 hdesc_buffer[sizeof(struct i2c_hid_desc)];
+ struct i2c_hid_desc hdesc; /* the HID Descriptor */
+ };
+ __le16 wHIDDescRegister; /* location of the i2c
+ * register of the HID
+ * descriptor. */
+ unsigned int bufsize; /* i2c buffer size */
+ char *inbuf; /* Input buffer */
+ char *cmdbuf; /* Command buffer */
+ char *argsbuf; /* Command arguments buffer */
+
+ unsigned long flags; /* device flags */
+
+ wait_queue_head_t wait; /* For waiting the interrupt */
+};
+
+static int __i2c_hid_command(struct i2c_client *client,
+ const struct i2c_hid_cmd *command, u8 reportID,
+ u8 reportType, u8 *args, int args_len,
+ unsigned char *buf_recv, int data_len)
+{
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ union command *cmd = (union command *)ihid->cmdbuf;
+ int ret;
+ struct i2c_msg msg[2];
+ int msg_num = 1;
+
+ int length = command->length;
+ bool wait = command->wait;
+ unsigned int registerIndex = command->registerIndex;
+
+ /* special case for hid_descr_cmd */
+ if (command == &hid_descr_cmd) {
+ cmd->c.reg = ihid->wHIDDescRegister;
+ } else {
+ cmd->data[0] = ihid->hdesc_buffer[registerIndex];
+ cmd->data[1] = ihid->hdesc_buffer[registerIndex + 1];
+ }
+
+ if (length > 2) {
+ cmd->c.opcode = command->opcode;
+ cmd->c.reportTypeID = reportID | reportType << 4;
+ }
+
+ memcpy(cmd->data + length, args, args_len);
+ length += args_len;
+
+ i2c_hid_dbg(ihid, "%s: cmd=%*ph\n", __func__, length, cmd->data);
+
+ msg[0].addr = client->addr;
+ msg[0].flags = client->flags & I2C_M_TEN;
+ msg[0].len = length;
+ msg[0].buf = cmd->data;
+ if (data_len > 0) {
+ msg[1].addr = client->addr;
+ msg[1].flags = client->flags & I2C_M_TEN;
+ msg[1].flags |= I2C_M_RD;
+ msg[1].len = data_len;
+ msg[1].buf = buf_recv;
+ msg_num = 2;
+ set_bit(I2C_HID_READ_PENDING, &ihid->flags);
+ }
+
+ if (wait)
+ set_bit(I2C_HID_RESET_PENDING, &ihid->flags);
+
+ ret = i2c_transfer(client->adapter, msg, msg_num);
+
+ if (data_len > 0)
+ clear_bit(I2C_HID_READ_PENDING, &ihid->flags);
+
+ if (ret != msg_num)
+ return ret < 0 ? ret : -EIO;
+
+ ret = 0;
+
+ if (wait) {
+ i2c_hid_dbg(ihid, "%s: waiting...\n", __func__);
+ if (!wait_event_timeout(ihid->wait,
+ !test_bit(I2C_HID_RESET_PENDING, &ihid->flags),
+ msecs_to_jiffies(5000)))
+ ret = -ENODATA;
+ i2c_hid_dbg(ihid, "%s: finished.\n", __func__);
+ }
+
+ return ret;
+}
+
+static int i2c_hid_command(struct i2c_client *client,
+ const struct i2c_hid_cmd *command,
+ unsigned char *buf_recv, int data_len)
+{
+ return __i2c_hid_command(client, command, 0, 0, NULL, 0,
+ buf_recv, data_len);
+}
+
+static int i2c_hid_get_report(struct i2c_client *client, u8 reportType,
+ u8 reportID, unsigned char *buf_recv, int data_len)
+{
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ u8 args[3];
+ int ret;
+ int args_len = 0;
+ u16 readRegister = le16_to_cpu(ihid->hdesc.wDataRegister);
+
+ i2c_hid_dbg(ihid, "%s\n", __func__);
+
+ if (reportID >= 0x0F) {
+ args[args_len++] = reportID;
+ reportID = 0x0F;
+ }
+
+ args[args_len++] = readRegister & 0xFF;
+ args[args_len++] = readRegister >> 8;
+
+ ret = __i2c_hid_command(client, &hid_get_report_cmd, reportID,
+ reportType, args, args_len, buf_recv, data_len);
+ if (ret) {
+ dev_err(&client->dev,
+ "failed to retrieve report from device.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
+ u8 reportID, unsigned char *buf, size_t data_len)
+{
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ u8 *args = ihid->argsbuf;
+ int ret;
+ u16 dataRegister = le16_to_cpu(ihid->hdesc.wDataRegister);
+
+ /* hidraw already checked that data_len < HID_MAX_BUFFER_SIZE */
+ u16 size = 2 /* size */ +
+ (reportID ? 1 : 0) /* reportID */ +
+ data_len /* buf */;
+ int args_len = (reportID >= 0x0F ? 1 : 0) /* optional third byte */ +
+ 2 /* dataRegister */ +
+ size /* args */;
+ int index = 0;
+
+ i2c_hid_dbg(ihid, "%s\n", __func__);
+
+ if (reportID >= 0x0F) {
+ args[index++] = reportID;
+ reportID = 0x0F;
+ }
+
+ args[index++] = dataRegister & 0xFF;
+ args[index++] = dataRegister >> 8;
+
+ args[index++] = size & 0xFF;
+ args[index++] = size >> 8;
+
+ if (reportID)
+ args[index++] = reportID;
+
+ memcpy(&args[index], buf, data_len);
+
+ ret = __i2c_hid_command(client, &hid_set_report_cmd, reportID,
+ reportType, args, args_len, NULL, 0);
+ if (ret) {
+ dev_err(&client->dev, "failed to set a report to device.\n");
+ return ret;
+ }
+
+ return data_len;
+}
+
+static int i2c_hid_set_power(struct i2c_client *client, int power_state)
+{
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ int ret;
+
+ i2c_hid_dbg(ihid, "%s\n", __func__);
+
+ ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
+ 0, NULL, 0, NULL, 0);
+ if (ret)
+ dev_err(&client->dev, "failed to change power setting.\n");
+
+ return ret;
+}
+
+static int i2c_hid_hwreset(struct i2c_client *client)
+{
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ int ret;
+
+ i2c_hid_dbg(ihid, "%s\n", __func__);
+
+ ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
+ if (ret)
+ return ret;
+
+ i2c_hid_dbg(ihid, "resetting...\n");
+
+ ret = i2c_hid_command(client, &hid_reset_cmd, NULL, 0);
+ if (ret) {
+ dev_err(&client->dev, "failed to reset device.\n");
+ i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void i2c_hid_get_input(struct i2c_hid *ihid)
+{
+ int ret, ret_size;
+ int size = le16_to_cpu(ihid->hdesc.wMaxInputLength);
+
+ ret = i2c_master_recv(ihid->client, ihid->inbuf, size);
+ if (ret != size) {
+ if (ret < 0)
+ return;
+
+ dev_err(&ihid->client->dev, "%s: got %d data instead of %d\n",
+ __func__, ret, size);
+ return;
+ }
+
+ ret_size = ihid->inbuf[0] | ihid->inbuf[1] << 8;
+
+ if (!ret_size) {
+ /* host or device initiated RESET completed */
+ if (test_and_clear_bit(I2C_HID_RESET_PENDING, &ihid->flags))
+ wake_up(&ihid->wait);
+ return;
+ }
+
+ if (ret_size > size) {
+ dev_err(&ihid->client->dev, "%s: incomplete report (%d/%d)\n",
+ __func__, size, ret_size);
+ return;
+ }
+
+ i2c_hid_dbg(ihid, "input: %*ph\n", ret_size, ihid->inbuf);
+
+ if (test_bit(I2C_HID_STARTED, &ihid->flags))
+ hid_input_report(ihid->hid, HID_INPUT_REPORT, ihid->inbuf + 2,
+ ret_size - 2, 1);
+
+ return;
+}
+
+static irqreturn_t i2c_hid_irq(int irq, void *dev_id)
+{
+ struct i2c_hid *ihid = dev_id;
+
+ if (test_bit(I2C_HID_READ_PENDING, &ihid->flags))
+ return IRQ_HANDLED;
+
+ i2c_hid_get_input(ihid);
+
+ return IRQ_HANDLED;
+}
+
+static int i2c_hid_get_report_length(struct hid_report *report)
+{
+ return ((report->size - 1) >> 3) + 1 +
+ report->device->report_enum[report->type].numbered + 2;
+}
+
+static void i2c_hid_init_report(struct hid_report *report, u8 *buffer,
+ size_t bufsize)
+{
+ struct hid_device *hid = report->device;
+ struct i2c_client *client = hid->driver_data;
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ unsigned int size, ret_size;
+
+ size = i2c_hid_get_report_length(report);
+ if (i2c_hid_get_report(client,
+ report->type == HID_FEATURE_REPORT ? 0x03 : 0x01,
+ report->id, buffer, size))
+ return;
+
+ i2c_hid_dbg(ihid, "report (len=%d): %*ph\n", size, size, ihid->inbuf);
+
+ ret_size = buffer[0] | (buffer[1] << 8);
+
+ if (ret_size != size) {
+ dev_err(&client->dev, "error in %s size:%d / ret_size:%d\n",
+ __func__, size, ret_size);
+ return;
+ }
+
+ /* hid->driver_lock is held as we are in probe function,
+ * we just need to setup the input fields, so using
+ * hid_report_raw_event is safe. */
+ hid_report_raw_event(hid, report->type, buffer + 2, size - 2, 1);
+}
+
+/*
+ * Initialize all reports
+ */
+static void i2c_hid_init_reports(struct hid_device *hid)
+{
+ struct hid_report *report;
+ struct i2c_client *client = hid->driver_data;
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ u8 *inbuf = kzalloc(ihid->bufsize, GFP_KERNEL);
+
+ if (!inbuf) {
+ dev_err(&client->dev, "can not retrieve initial reports\n");
+ return;
+ }
+
+ list_for_each_entry(report,
+ &hid->report_enum[HID_INPUT_REPORT].report_list, list)
+ i2c_hid_init_report(report, inbuf, ihid->bufsize);
+
+ list_for_each_entry(report,
+ &hid->report_enum[HID_FEATURE_REPORT].report_list, list)
+ i2c_hid_init_report(report, inbuf, ihid->bufsize);
+
+ kfree(inbuf);
+}
+
+/*
+ * Traverse the supplied list of reports and find the longest
+ */
+static void i2c_hid_find_max_report(struct hid_device *hid, unsigned int type,
+ unsigned int *max)
+{
+ struct hid_report *report;
+ unsigned int size;
+
+ /* We should not rely on wMaxInputLength, as some devices may set it to
+ * a wrong length. */
+ list_for_each_entry(report, &hid->report_enum[type].report_list, list) {
+ size = i2c_hid_get_report_length(report);
+ if (*max < size)
+ *max = size;
+ }
+}
+
+static void i2c_hid_free_buffers(struct i2c_hid *ihid)
+{
+ kfree(ihid->inbuf);
+ kfree(ihid->argsbuf);
+ kfree(ihid->cmdbuf);
+ ihid->inbuf = NULL;
+ ihid->cmdbuf = NULL;
+ ihid->argsbuf = NULL;
+ ihid->bufsize = 0;
+}
+
+static int i2c_hid_alloc_buffers(struct i2c_hid *ihid, size_t report_size)
+{
+ /* the worst case is computed from the set_report command with a
+ * reportID > 15 and the maximum report length */
+ int args_len = sizeof(__u8) + /* optional ReportID byte */
+ sizeof(__u16) + /* data register */
+ sizeof(__u16) + /* size of the report */
+ report_size; /* report */
+
+ ihid->inbuf = kzalloc(report_size, GFP_KERNEL);
+ ihid->argsbuf = kzalloc(args_len, GFP_KERNEL);
+ ihid->cmdbuf = kzalloc(sizeof(union command) + args_len, GFP_KERNEL);
+
+ if (!ihid->inbuf || !ihid->argsbuf || !ihid->cmdbuf) {
+ i2c_hid_free_buffers(ihid);
+ return -ENOMEM;
+ }
+
+ ihid->bufsize = report_size;
+
+ return 0;
+}
+
+static int i2c_hid_get_raw_report(struct hid_device *hid,
+ unsigned char report_number, __u8 *buf, size_t count,
+ unsigned char report_type)
+{
+ struct i2c_client *client = hid->driver_data;
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ size_t ret_count, ask_count;
+ int ret;
+
+ if (report_type == HID_OUTPUT_REPORT)
+ return -EINVAL;
+
+ /* +2 bytes to include the size of the reply in the query buffer */
+ ask_count = min(count + 2, (size_t)ihid->bufsize);
+
+ ret = i2c_hid_get_report(client,
+ report_type == HID_FEATURE_REPORT ? 0x03 : 0x01,
+ report_number, ihid->inbuf, ask_count);
+
+ if (ret < 0)
+ return ret;
+
+ ret_count = ihid->inbuf[0] | (ihid->inbuf[1] << 8);
+
+ if (ret_count <= 2)
+ return 0;
+
+ ret_count = min(ret_count, ask_count);
+
+ /* The query buffer contains the size, dropping it in the reply */
+ count = min(count, ret_count - 2);
+ memcpy(buf, ihid->inbuf + 2, count);
+
+ return count;
+}
+
+static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
+ size_t count, unsigned char report_type)
+{
+ struct i2c_client *client = hid->driver_data;
+ int report_id = buf[0];
+
+ if (report_type == HID_INPUT_REPORT)
+ return -EINVAL;
+
+ return i2c_hid_set_report(client,
+ report_type == HID_FEATURE_REPORT ? 0x03 : 0x02,
+ report_id, buf, count);
+}
+
+static int i2c_hid_parse(struct hid_device *hid)
+{
+ struct i2c_client *client = hid->driver_data;
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ struct i2c_hid_desc *hdesc = &ihid->hdesc;
+ unsigned int rsize;
+ char *rdesc;
+ int ret;
+ int tries = 3;
+
+ i2c_hid_dbg(ihid, "entering %s\n", __func__);
+
+ rsize = le16_to_cpu(hdesc->wReportDescLength);
+ if (!rsize || rsize > HID_MAX_DESCRIPTOR_SIZE) {
+ dbg_hid("weird size of report descriptor (%u)\n", rsize);
+ return -EINVAL;
+ }
+
+ do {
+ ret = i2c_hid_hwreset(client);
+ if (ret)
+ msleep(1000);
+ } while (tries-- > 0 && ret);
+
+ if (ret)
+ return ret;
+
+ rdesc = kzalloc(rsize, GFP_KERNEL);
+
+ if (!rdesc) {
+ dbg_hid("couldn't allocate rdesc memory\n");
+ return -ENOMEM;
+ }
+
+ i2c_hid_dbg(ihid, "asking HID report descriptor\n");
+
+ ret = i2c_hid_command(client, &hid_report_descr_cmd, rdesc, rsize);
+ if (ret) {
+ hid_err(hid, "reading report descriptor failed\n");
+ kfree(rdesc);
+ return -EIO;
+ }
+
+ i2c_hid_dbg(ihid, "Report Descriptor: %*ph\n", rsize, rdesc);
+
+ ret = hid_parse_report(hid, rdesc, rsize);
+ kfree(rdesc);
+ if (ret) {
+ dbg_hid("parsing report descriptor failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int i2c_hid_start(struct hid_device *hid)
+{
+ struct i2c_client *client = hid->driver_data;
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ int ret;
+ unsigned int bufsize = HID_MIN_BUFFER_SIZE;
+
+ i2c_hid_find_max_report(hid, HID_INPUT_REPORT, &bufsize);
+ i2c_hid_find_max_report(hid, HID_OUTPUT_REPORT, &bufsize);
+ i2c_hid_find_max_report(hid, HID_FEATURE_REPORT, &bufsize);
+
+ if (bufsize > ihid->bufsize) {
+ i2c_hid_free_buffers(ihid);
+
+ ret = i2c_hid_alloc_buffers(ihid, bufsize);
+
+ if (ret)
+ return ret;
+ }
+
+ if (!(hid->quirks & HID_QUIRK_NO_INIT_REPORTS))
+ i2c_hid_init_reports(hid);
+
+ return 0;
+}
+
+static void i2c_hid_stop(struct hid_device *hid)
+{
+ struct i2c_client *client = hid->driver_data;
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+
+ hid->claimed = 0;
+
+ i2c_hid_free_buffers(ihid);
+}
+
+static int i2c_hid_open(struct hid_device *hid)
+{
+ struct i2c_client *client = hid->driver_data;
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ int ret = 0;
+
+ mutex_lock(&i2c_hid_open_mut);
+ if (!hid->open++) {
+ ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
+ if (ret) {
+ hid->open--;
+ goto done;
+ }
+ set_bit(I2C_HID_STARTED, &ihid->flags);
+ }
+done:
+ mutex_unlock(&i2c_hid_open_mut);
+ return ret;
+}
+
+static void i2c_hid_close(struct hid_device *hid)
+{
+ struct i2c_client *client = hid->driver_data;
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+
+ /* protecting hid->open to make sure we don't restart
+ * data acquistion due to a resumption we no longer
+ * care about
+ */
+ mutex_lock(&i2c_hid_open_mut);
+ if (!--hid->open) {
+ clear_bit(I2C_HID_STARTED, &ihid->flags);
+
+ /* Save some power */
+ i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+ }
+ mutex_unlock(&i2c_hid_open_mut);
+}
+
+static int i2c_hid_power(struct hid_device *hid, int lvl)
+{
+ struct i2c_client *client = hid->driver_data;
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ int ret = 0;
+
+ i2c_hid_dbg(ihid, "%s lvl:%d\n", __func__, lvl);
+
+ switch (lvl) {
+ case PM_HINT_FULLON:
+ ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
+ break;
+ case PM_HINT_NORMAL:
+ ret = i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+ break;
+ }
+ return ret;
+}
+
+static int i2c_hid_hidinput_input_event(struct input_dev *dev,
+ unsigned int type, unsigned int code, int value)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+ struct hid_field *field;
+ int offset;
+
+ if (type == EV_FF)
+ return input_ff_event(dev, type, code, value);
+
+ if (type != EV_LED)
+ return -1;
+
+ offset = hidinput_find_field(hid, type, code, &field);
+
+ if (offset == -1) {
+ hid_warn(dev, "event field not found\n");
+ return -1;
+ }
+
+ return hid_set_field(field, offset, value);
+}
+
+static struct hid_ll_driver i2c_hid_ll_driver = {
+ .parse = i2c_hid_parse,
+ .start = i2c_hid_start,
+ .stop = i2c_hid_stop,
+ .open = i2c_hid_open,
+ .close = i2c_hid_close,
+ .power = i2c_hid_power,
+ .hidinput_input_event = i2c_hid_hidinput_input_event,
+};
+
+static int __devinit i2c_hid_init_irq(struct i2c_client *client)
+{
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ int ret;
+
+ dev_dbg(&client->dev, "Requesting IRQ: %d\n", client->irq);
+
+ ret = request_threaded_irq(client->irq, NULL, i2c_hid_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ client->name, ihid);
+ if (ret < 0) {
+ dev_warn(&client->dev,
+ "Could not register for %s interrupt, irq = %d,"
+ " ret = %d\n",
+ client->name, client->irq, ret);
+
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devinit i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid)
+{
+ struct i2c_client *client = ihid->client;
+ struct i2c_hid_desc *hdesc = &ihid->hdesc;
+ unsigned int dsize;
+ int ret;
+
+ /* Fetch the length of HID description, retrieve the 4 first bytes:
+ * bytes 0-1 -> length
+ * bytes 2-3 -> bcdVersion (has to be 1.00) */
+ ret = i2c_hid_command(client, &hid_descr_cmd, ihid->hdesc_buffer, 4);
+
+ i2c_hid_dbg(ihid, "%s, ihid->hdesc_buffer: %*ph\n",
+ __func__, 4, ihid->hdesc_buffer);
+
+ if (ret) {
+ dev_err(&client->dev,
+ "unable to fetch the size of HID descriptor (ret=%d)\n",
+ ret);
+ return -ENODEV;
+ }
+
+ dsize = le16_to_cpu(hdesc->wHIDDescLength);
+ /*
+ * the size of the HID descriptor should at least contain
+ * its size and the bcdVersion (4 bytes), and should not be greater
+ * than sizeof(struct i2c_hid_desc) as we directly fill this struct
+ * through i2c_hid_command.
+ */
+ if (dsize < 4 || dsize > sizeof(struct i2c_hid_desc)) {
+ dev_err(&client->dev, "weird size of HID descriptor (%u)\n",
+ dsize);
+ return -ENODEV;
+ }
+
+ /* check bcdVersion == 1.0 */
+ if (le16_to_cpu(hdesc->bcdVersion) != 0x0100) {
+ dev_err(&client->dev,
+ "unexpected HID descriptor bcdVersion (0x%04hx)\n",
+ le16_to_cpu(hdesc->bcdVersion));
+ return -ENODEV;
+ }
+
+ i2c_hid_dbg(ihid, "Fetching the HID descriptor\n");
+
+ ret = i2c_hid_command(client, &hid_descr_cmd, ihid->hdesc_buffer,
+ dsize);
+ if (ret) {
+ dev_err(&client->dev, "hid_descr_cmd Fail\n");
+ return -ENODEV;
+ }
+
+ i2c_hid_dbg(ihid, "HID Descriptor: %*ph\n", dsize, ihid->hdesc_buffer);
+
+ return 0;
+}
+
+static int __devinit i2c_hid_probe(struct i2c_client *client,
+ const struct i2c_device_id *dev_id)
+{
+ int ret;
+ struct i2c_hid *ihid;
+ struct hid_device *hid;
+ __u16 hidRegister;
+ struct i2c_hid_platform_data *platform_data = client->dev.platform_data;
+
+ dbg_hid("HID probe called for i2c 0x%02x\n", client->addr);
+
+ if (!platform_data) {
+ dev_err(&client->dev, "HID register address not provided\n");
+ return -EINVAL;
+ }
+
+ if (!client->irq) {
+ dev_err(&client->dev,
+ "HID over i2c has not been provided an Int IRQ\n");
+ return -EINVAL;
+ }
+
+ ihid = kzalloc(sizeof(struct i2c_hid), GFP_KERNEL);
+ if (!ihid)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, ihid);
+
+ ihid->client = client;
+
+ hidRegister = platform_data->hid_descriptor_address;
+ ihid->wHIDDescRegister = cpu_to_le16(hidRegister);
+
+ init_waitqueue_head(&ihid->wait);
+
+ /* we need to allocate the command buffer without knowing the maximum
+ * size of the reports. Let's use HID_MIN_BUFFER_SIZE, then we do the
+ * real computation later. */
+ ret = i2c_hid_alloc_buffers(ihid, HID_MIN_BUFFER_SIZE);
+ if (ret < 0)
+ goto err;
+
+ ret = i2c_hid_fetch_hid_descriptor(ihid);
+ if (ret < 0)
+ goto err;
+
+ ret = i2c_hid_init_irq(client);
+ if (ret < 0)
+ goto err;
+
+ hid = hid_allocate_device();
+ if (IS_ERR(hid)) {
+ ret = PTR_ERR(hid);
+ goto err_irq;
+ }
+
+ ihid->hid = hid;
+
+ hid->driver_data = client;
+ hid->ll_driver = &i2c_hid_ll_driver;
+ hid->hid_get_raw_report = i2c_hid_get_raw_report;
+ hid->hid_output_raw_report = i2c_hid_output_raw_report;
+ hid->dev.parent = &client->dev;
+ hid->bus = BUS_I2C;
+ hid->version = le16_to_cpu(ihid->hdesc.bcdVersion);
+ hid->vendor = le16_to_cpu(ihid->hdesc.wVendorID);
+ hid->product = le16_to_cpu(ihid->hdesc.wProductID);
+
+ snprintf(hid->name, sizeof(hid->name), "%s %04hX:%04hX",
+ client->name, hid->vendor, hid->product);
+
+ ret = hid_add_device(hid);
+ if (ret) {
+ if (ret != -ENODEV)
+ hid_err(client, "can't add hid device: %d\n", ret);
+ goto err_mem_free;
+ }
+
+ return 0;
+
+err_mem_free:
+ hid_destroy_device(hid);
+
+err_irq:
+ free_irq(client->irq, ihid);
+
+err:
+ i2c_hid_free_buffers(ihid);
+ kfree(ihid);
+ return ret;
+}
+
+static int __devexit i2c_hid_remove(struct i2c_client *client)
+{
+ struct i2c_hid *ihid = i2c_get_clientdata(client);
+ struct hid_device *hid;
+
+ hid = ihid->hid;
+ hid_destroy_device(hid);
+
+ free_irq(client->irq, ihid);
+
+ if (ihid->bufsize)
+ i2c_hid_free_buffers(ihid);
+
+ kfree(ihid);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int i2c_hid_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ if (device_may_wakeup(&client->dev))
+ enable_irq_wake(client->irq);
+
+ /* Save some power */
+ i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+
+ return 0;
+}
+
+static int i2c_hid_resume(struct device *dev)
+{
+ int ret;
+ struct i2c_client *client = to_i2c_client(dev);
+
+ ret = i2c_hid_hwreset(client);
+ if (ret)
+ return ret;
+
+ if (device_may_wakeup(&client->dev))
+ disable_irq_wake(client->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(i2c_hid_pm, i2c_hid_suspend, i2c_hid_resume);
+
+static const struct i2c_device_id i2c_hid_id_table[] = {
+ { "hid", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, i2c_hid_id_table);
+
+
+static struct i2c_driver i2c_hid_driver = {
+ .driver = {
+ .name = "i2c_hid",
+ .owner = THIS_MODULE,
+ .pm = &i2c_hid_pm,
+ },
+
+ .probe = i2c_hid_probe,
+ .remove = __devexit_p(i2c_hid_remove),
+
+ .id_table = i2c_hid_id_table,
+};
+
+module_i2c_driver(i2c_hid_driver);
+
+MODULE_DESCRIPTION("HID over I2C core driver");
+MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 11c7932..ac9e352 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -72,6 +72,7 @@
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },
@@ -79,9 +80,11 @@
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_SIGMATEL, USB_DEVICE_ID_SIGMATEL_STMP3780, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_1, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_2, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_TPV, USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U, HID_QUIRK_MULTI_INPUT },
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 14599e2..87bd649 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -361,10 +361,6 @@
prepare_to_wait(&list->hiddev->wait, &wait, TASK_INTERRUPTIBLE);
while (list->head == list->tail) {
- if (file->f_flags & O_NONBLOCK) {
- retval = -EAGAIN;
- break;
- }
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
@@ -373,6 +369,10 @@
retval = -EIO;
break;
}
+ if (file->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ break;
+ }
/* let O_NONBLOCK tasks run */
mutex_unlock(&list->thread_lock);
@@ -625,7 +625,7 @@
break;
case HIDIOCAPPLICATION:
- if (arg < 0 || arg >= hid->maxapplication)
+ if (arg >= hid->maxapplication)
break;
for (i = 0; i < hid->maxcollection; i++)
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index c0ec7d4..475b9d4 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -247,7 +247,7 @@
if (mt->flags & INPUT_MT_DROP_UNUSED) {
for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
- if (s->frame == mt->frame)
+ if (input_mt_is_used(mt, s))
continue;
input_mt_slot(dev, s - mt->slots);
input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);
diff --git a/include/linux/hid.h b/include/linux/hid.h
index c5f6ec2..7330a0f 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -344,6 +344,7 @@
struct hid_usage {
unsigned hid; /* hid usage code */
unsigned collection_index; /* index into collection array */
+ unsigned usage_index; /* index into usage array */
/* hidinput data */
__u16 code; /* input driver code */
__u8 type; /* input driver type */
@@ -686,6 +687,7 @@
extern int hid_debug;
+extern bool hid_ignore(struct hid_device *);
extern int hid_add_device(struct hid_device *);
extern void hid_destroy_device(struct hid_device *);
@@ -708,6 +710,7 @@
int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
struct hid_field *hidinput_get_led_field(struct hid_device *hid);
unsigned int hidinput_count_leds(struct hid_device *hid);
+__s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code);
void hid_output_report(struct hid_report *report, __u8 *data);
struct hid_device *hid_allocate_device(void);
struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
@@ -718,6 +721,7 @@
void hid_disconnect(struct hid_device *hid);
const struct hid_device_id *hid_match_id(struct hid_device *hdev,
const struct hid_device_id *id);
+s32 hid_snto32(__u32 value, unsigned n);
/**
* hid_map_usage - map usage input bits
diff --git a/include/linux/i2c/i2c-hid.h b/include/linux/i2c/i2c-hid.h
new file mode 100644
index 0000000..60e411d
--- /dev/null
+++ b/include/linux/i2c/i2c-hid.h
@@ -0,0 +1,35 @@
+/*
+ * HID over I2C protocol implementation
+ *
+ * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef __LINUX_I2C_HID_H
+#define __LINUX_I2C_HID_H
+
+#include <linux/types.h>
+
+/**
+ * struct i2chid_platform_data - used by hid over i2c implementation.
+ * @hid_descriptor_address: i2c register where the HID descriptor is stored.
+ *
+ * Note that it is the responsibility of the platform driver (or the acpi 5.0
+ * driver) to setup the irq related to the gpio in the struct i2c_board_info.
+ * The platform driver should also setup the gpio according to the device:
+ *
+ * A typical example is the following:
+ * irq = gpio_to_irq(intr_gpio);
+ * hkdk4412_i2c_devs5[0].irq = irq; // store the irq in i2c_board_info
+ * gpio_request(intr_gpio, "elan-irq");
+ * s3c_gpio_setpull(intr_gpio, S3C_GPIO_PULL_UP);
+ */
+struct i2c_hid_platform_data {
+ u16 hid_descriptor_address;
+};
+
+#endif /* __LINUX_I2C_HID_H */
diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h
index cc5cca7..2e86bd0 100644
--- a/include/linux/input/mt.h
+++ b/include/linux/input/mt.h
@@ -69,6 +69,12 @@
return input_mt_get_value(slot, ABS_MT_TRACKING_ID) >= 0;
}
+static inline bool input_mt_is_used(const struct input_mt *mt,
+ const struct input_mt_slot *slot)
+{
+ return slot->frame == mt->frame;
+}
+
int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots,
unsigned int flags);
void input_mt_destroy_slots(struct input_dev *dev);
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
index 5588285..935119c 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input.h
@@ -851,6 +851,7 @@
#define MSC_GESTURE 0x02
#define MSC_RAW 0x03
#define MSC_SCAN 0x04
+#define MSC_TIMESTAMP 0x05
#define MSC_MAX 0x07
#define MSC_CNT (MSC_MAX+1)
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index ccd985d..1f4a32b 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -941,6 +941,13 @@
hid->hid_get_raw_report = hidp_get_raw_report;
hid->hid_output_raw_report = hidp_output_raw_report;
+ /* True if device is blacklisted in drivers/hid/hid-core.c */
+ if (hid_ignore(hid)) {
+ hid_destroy_device(session->hid);
+ session->hid = NULL;
+ return -ENODEV;
+ }
+
return 0;
fault:
@@ -1013,7 +1020,7 @@
if (req->rd_size > 0) {
err = hidp_setup_hid(session, req);
- if (err)
+ if (err && err != -ENODEV)
goto purge;
}