mtd: sh_flctl: Expand the READID command to 8 bytes
The nand base code wants to read out 8 bytes in the READID command.
Reflect this in the driver code.
Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 9291066..407acb5 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -320,6 +320,7 @@
break;
case NAND_CMD_READID:
flcmncr_val &= ~SNAND_E;
+ flcmdcr_val |= CDSRC_E;
addr_len_bytes = ADRCNT_1;
break;
case NAND_CMD_STATUS:
@@ -559,13 +560,18 @@
case NAND_CMD_READID:
set_cmd_regs(mtd, command, command);
- set_addr(mtd, 0, 0);
- flctl->read_bytes = 4;
+ /* READID is always performed using an 8-bit bus */
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ column <<= 1;
+ set_addr(mtd, column, 0);
+
+ flctl->read_bytes = 8;
writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
empty_fifo(flctl);
start_translation(flctl);
- read_datareg(flctl, 0); /* read and end */
+ read_fiforeg(flctl, flctl->read_bytes, 0);
+ wait_completion(flctl);
break;
case NAND_CMD_ERASE1: