diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 44afa0e..4ff6504 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -4,7 +4,7 @@
 - compatible: Should be "cdns,[<chip>-]{macb|gem}"
   Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs.
   Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
-  Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on
+  Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
   the Cadence GEM, or the generic form: "cdns,gem".
 - reg: Address and length of the register set for the device
 - interrupts: Should contain macb interrupt
diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/Documentation/devicetree/bindings/video/simple-framebuffer.txt
new file mode 100644
index 0000000..3ea4605
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/simple-framebuffer.txt
@@ -0,0 +1,25 @@
+Simple Framebuffer
+
+A simple frame-buffer describes a raw memory region that may be rendered to,
+with the assumption that the display hardware has already been set up to scan
+out from that buffer.
+
+Required properties:
+- compatible: "simple-framebuffer"
+- reg: Should contain the location and size of the framebuffer memory.
+- width: The width of the framebuffer in pixels.
+- height: The height of the framebuffer in pixels.
+- stride: The number of bytes in each line of the framebuffer.
+- format: The format of the framebuffer surface. Valid values are:
+  - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
+
+Example:
+
+	framebuffer {
+		compatible = "simple-framebuffer";
+		reg = <0x1d385000 (1600 * 1200 * 2)>;
+		width = <1600>;
+		height = <1200>;
+		stride = <(1600 * 2)>;
+		format = "r5g6b5";
+	};
diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt
index c75694b..a9c16c9 100644
--- a/Documentation/rapidio/rapidio.txt
+++ b/Documentation/rapidio/rapidio.txt
@@ -79,20 +79,63 @@
 In order to initialize the RapidIO subsystem, a platform must initialize and
 register at least one master port within the RapidIO network. To register mport
 within the subsystem controller driver initialization code calls function
-rio_register_mport() for each available master port. After all active master
-ports are registered with a RapidIO subsystem, the rio_init_mports() routine
-is called to perform enumeration and discovery.
+rio_register_mport() for each available master port.
 
-In the current PowerPC-based implementation a subsys_initcall() is specified to
-perform controller initialization and mport registration. At the end it directly
-calls rio_init_mports() to execute RapidIO enumeration and discovery.
+RapidIO subsystem uses subsys_initcall() or device_initcall() to perform
+controller initialization (depending on controller device type).
+
+After all active master ports are registered with a RapidIO subsystem,
+an enumeration and/or discovery routine may be called automatically or
+by user-space command.
 
 4. Enumeration and Discovery
 ----------------------------
 
-When rio_init_mports() is called it scans a list of registered master ports and
-calls an enumeration or discovery routine depending on the configured role of a
-master port: host or agent.
+4.1 Overview
+------------
+
+RapidIO subsystem configuration options allow users to specify enumeration and
+discovery methods as statically linked components or loadable modules.
+An enumeration/discovery method implementation and available input parameters
+define how any given method can be attached to available RapidIO mports:
+simply to all available mports OR individually to the specified mport device.
+
+Depending on selected enumeration/discovery build configuration, there are
+several methods to initiate an enumeration and/or discovery process:
+
+  (a) Statically linked enumeration and discovery process can be started
+  automatically during kernel initialization time using corresponding module
+  parameters. This was the original method used since introduction of RapidIO
+  subsystem. Now this method relies on enumerator module parameter which is
+  'rio-scan.scan' for existing basic enumeration/discovery method.
+  When automatic start of enumeration/discovery is used a user has to ensure
+  that all discovering endpoints are started before the enumerating endpoint
+  and are waiting for enumeration to be completed.
+  Configuration option CONFIG_RAPIDIO_DISC_TIMEOUT defines time that discovering
+  endpoint waits for enumeration to be completed. If the specified timeout
+  expires the discovery process is terminated without obtaining RapidIO network
+  information. NOTE: a timed out discovery process may be restarted later using
+  a user-space command as it is described later if the given endpoint was
+  enumerated successfully.
+
+  (b) Statically linked enumeration and discovery process can be started by
+  a command from user space. This initiation method provides more flexibility
+  for a system startup compared to the option (a) above. After all participating
+  endpoints have been successfully booted, an enumeration process shall be
+  started first by issuing a user-space command, after an enumeration is
+  completed a discovery process can be started on all remaining endpoints.
+
+  (c) Modular enumeration and discovery process can be started by a command from
+  user space. After an enumeration/discovery module is loaded, a network scan
+  process can be started by issuing a user-space command.
+  Similar to the option (b) above, an enumerator has to be started first.
+
+  (d) Modular enumeration and discovery process can be started by a module
+  initialization routine. In this case an enumerating module shall be loaded
+  first.
+
+When a network scan process is started it calls an enumeration or discovery
+routine depending on the configured role of a master port: host or agent.
 
 Enumeration is performed by a master port if it is configured as a host port by
 assigning a host device ID greater than or equal to zero. A host device ID is
@@ -104,8 +147,58 @@
 The enumeration and discovery routines use RapidIO maintenance transactions
 to access the configuration space of devices.
 
-The enumeration process is implemented according to the enumeration algorithm
-outlined in the RapidIO Interconnect Specification: Annex I [1].
+4.2 Automatic Start of Enumeration and Discovery
+------------------------------------------------
+
+Automatic enumeration/discovery start method is applicable only to built-in
+enumeration/discovery RapidIO configuration selection. To enable automatic
+enumeration/discovery start by existing basic enumerator method set use boot
+command line parameter "rio-scan.scan=1".
+
+This configuration requires synchronized start of all RapidIO endpoints that
+form a network which will be enumerated/discovered. Discovering endpoints have
+to be started before an enumeration starts to ensure that all RapidIO
+controllers have been initialized and are ready to be discovered. Configuration
+parameter CONFIG_RAPIDIO_DISC_TIMEOUT defines time (in seconds) which
+a discovering endpoint will wait for enumeration to be completed.
+
+When automatic enumeration/discovery start is selected, basic method's
+initialization routine calls rio_init_mports() to perform enumeration or
+discovery for all known mport devices.
+
+Depending on RapidIO network size and configuration this automatic
+enumeration/discovery start method may be difficult to use due to the
+requirement for synchronized start of all endpoints.
+
+4.3 User-space Start of Enumeration and Discovery
+-------------------------------------------------
+
+User-space start of enumeration and discovery can be used with built-in and
+modular build configurations. For user-space controlled start RapidIO subsystem
+creates the sysfs write-only attribute file '/sys/bus/rapidio/scan'. To initiate
+an enumeration or discovery process on specific mport device, a user needs to
+write mport_ID (not RapidIO destination ID) into that file. The mport_ID is a
+sequential number (0 ... RIO_MAX_MPORTS) assigned during mport device
+registration. For example for machine with single RapidIO controller, mport_ID
+for that controller always will be 0.
+
+To initiate RapidIO enumeration/discovery on all available mports a user may
+write '-1' (or RIO_MPORT_ANY) into the scan attribute file.
+
+4.4 Basic Enumeration Method
+----------------------------
+
+This is an original enumeration/discovery method which is available since
+first release of RapidIO subsystem code. The enumeration process is
+implemented according to the enumeration algorithm outlined in the RapidIO
+Interconnect Specification: Annex I [1].
+
+This method can be configured as statically linked or loadable module.
+The method's single parameter "scan" allows to trigger the enumeration/discovery
+process from module initialization routine.
+
+This enumeration/discovery method can be started only once and does not support
+unloading if it is built as a module.
 
 The enumeration process traverses the network using a recursive depth-first
 algorithm. When a new device is found, the enumerator takes ownership of that
@@ -160,6 +253,19 @@
 an agent skips RapidIO discovery and continues with remaining kernel
 initialization.
 
+4.5 Adding New Enumeration/Discovery Method
+-------------------------------------------
+
+RapidIO subsystem code organization allows addition of new enumeration/discovery
+methods as new configuration options without significant impact to to the core
+RapidIO code.
+
+A new enumeration/discovery method has to be attached to one or more mport
+devices before an enumeration/discovery process can be started. Normally,
+method's module initialization routine calls rio_register_scan() to attach
+an enumerator to a specified mport device (or devices). The basic enumerator
+implementation demonstrates this process.
+
 5. References
 -------------
 
diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.txt
index 97f71ce..1987817 100644
--- a/Documentation/rapidio/sysfs.txt
+++ b/Documentation/rapidio/sysfs.txt
@@ -88,3 +88,20 @@
 
 IDT_GEN2:
  errlog - reads contents of device error log until it is empty.
+
+
+5. RapidIO Bus Attributes
+-------------------------
+
+RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-specific
+attribute:
+
+  scan - allows to trigger enumeration discovery process from user space. This
+	 is a write-only attribute. To initiate an enumeration or discovery
+	 process on specific mport device, a user needs to write mport_ID (not
+	 RapidIO destination ID) into this file. The mport_ID is a sequential
+	 number (0 ... RIO_MAX_MPORTS) assigned to the mport device.
+	 For example, for a machine with a single RapidIO controller, mport_ID
+	 for that controller always will be 0.
+	 To initiate RapidIO enumeration/discovery on all available mports
+	 a user must write '-1' (or RIO_MPORT_ANY) into this attribute file.
diff --git a/MAINTAINERS b/MAINTAINERS
index 829c032..fd3a495 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3865,9 +3865,16 @@
 M:	Haiyang Zhang <haiyangz@microsoft.com>
 L:	devel@linuxdriverproject.org
 S:	Maintained
-F:	drivers/hv/
+F:	arch/x86/include/asm/mshyperv.h
+F:	arch/x86/include/uapi/asm/hyperv.h
+F:	arch/x86/kernel/cpu/mshyperv.c
 F:	drivers/hid/hid-hyperv.c
+F:	drivers/hv/
 F:	drivers/net/hyperv/
+F:	drivers/scsi/storvsc_drv.c
+F:	drivers/video/hyperv_fb.c
+F:	include/linux/hyperv.h
+F:	tools/hv/
 
 I2C OVER PARALLEL PORT
 M:	Jean Delvare <khali@linux-fr.org>
@@ -4641,12 +4648,13 @@
 F:	include/uapi/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
-M:	Marcelo Tosatti <mtosatti@redhat.com>
 M:	Gleb Natapov <gleb@redhat.com>
+M:	Paolo Bonzini <pbonzini@redhat.com>
 L:	kvm@vger.kernel.org
-W:	http://kvm.qumranet.com
+W:	http://linux-kvm.org
 S:	Supported
-F:	Documentation/*/kvm.txt
+F:	Documentation/*/kvm*.txt
+F:	Documentation/virtual/kvm/
 F:	arch/*/kvm/
 F:	arch/*/include/asm/kvm*
 F:	include/linux/kvm*
@@ -5516,18 +5524,18 @@
 F:	Documentation/networking/vxge.txt
 F:	drivers/net/ethernet/neterion/
 
-NETFILTER/IPTABLES/IPCHAINS
-P:	Harald Welte
-P:	Jozsef Kadlecsik
+NETFILTER/IPTABLES
 M:	Pablo Neira Ayuso <pablo@netfilter.org>
 M:	Patrick McHardy <kaber@trash.net>
+M:	Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
 L:	netfilter-devel@vger.kernel.org
 L:	netfilter@vger.kernel.org
 L:	coreteam@netfilter.org
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/
-T:	git git://1984.lsi.us.es/nf
-T:	git git://1984.lsi.us.es/nf-next
+Q:	http://patchwork.ozlabs.org/project/netfilter-devel/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next.git
 S:	Supported
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/
@@ -6076,6 +6084,7 @@
 W:	http://www.parisc-linux.org/
 Q:	http://patchwork.kernel.org/project/linux-parisc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git
 S:	Maintained
 F:	arch/parisc/
 F:	drivers/parisc/
diff --git a/Makefile b/Makefile
index 93875f5..73e20db 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*
diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts
index c0fd362..0fa0d4a 100644
--- a/arch/arc/boot/dts/abilis_tb100_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts
@@ -37,7 +37,7 @@
 
 	soc100 {
 		uart@FF100000 {
-			pinctrl-names = "abilis,simple-default";
+			pinctrl-names = "default";
 			pinctrl-0 = <&pctl_uart0>;
 		};
 		ethernet@FE100000 {
diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts
index 6f8c381..a4d80ce 100644
--- a/arch/arc/boot/dts/abilis_tb101_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts
@@ -37,7 +37,7 @@
 
 	soc100 {
 		uart@FF100000 {
-			pinctrl-names = "abilis,simple-default";
+			pinctrl-names = "default";
 			pinctrl-0 = <&pctl_uart0>;
 		};
 		ethernet@FE100000 {
diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
index a6139fc..b97e305 100644
--- a/arch/arc/boot/dts/abilis_tb10x.dtsi
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -88,8 +88,7 @@
 		};
 
 		uart@FF100000 {
-			compatible = "snps,dw-apb-uart",
-					"abilis,simple-pinctrl";
+			compatible = "snps,dw-apb-uart";
 			reg = <0xFF100000 0x100>;
 			clock-frequency = <166666666>;
 			interrupts = <25 1>;
@@ -184,8 +183,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <1>;
-			compatible = "abilis,tb100-spi",
-					"abilis,simple-pinctrl";
+			compatible = "abilis,tb100-spi";
 			num-cs = <2>;
 			reg = <0xFE011000 0x20>;
 			interrupt-parent = <&tb10x_ictl>;
diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h
index 9f841af..ef62682 100644
--- a/arch/arc/include/asm/cacheflush.h
+++ b/arch/arc/include/asm/cacheflush.h
@@ -93,14 +93,16 @@
 #endif
 }
 
-#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & 3)
+#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & 1)
 
 /*
  * checks if two addresses (after page aligning) index into same cache set
  */
 #define addr_not_cache_congruent(addr1, addr2)				\
+({									\
 	cache_is_vipt_aliasing() ? 					\
-		(CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0		\
+		(CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0;		\
+})
 
 #define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
 do {									\
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index 374a355..ab84bf1 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -19,13 +19,6 @@
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
 #define copy_page(to, from)		memcpy((to), (from), PAGE_SIZE)
 
-#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
-
-#define clear_user_page(addr, vaddr, pg)	clear_page(addr)
-#define copy_user_page(vto, vfrom, vaddr, pg)	copy_page(vto, vfrom)
-
-#else	/* VIPT aliasing dcache */
-
 struct vm_area_struct;
 struct page;
 
@@ -35,8 +28,6 @@
 			unsigned long u_vaddr, struct vm_area_struct *vma);
 void clear_user_page(void *to, unsigned long u_vaddr, struct page *page);
 
-#endif	/* CONFIG_ARC_CACHE_VIPT_ALIASING */
-
 #undef STRICT_MM_TYPECHECKS
 
 #ifdef STRICT_MM_TYPECHECKS
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 1cc4720..95b1522 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -57,9 +57,9 @@
 
 #define _PAGE_ACCESSED      (1<<1)	/* Page is accessed (S) */
 #define _PAGE_CACHEABLE     (1<<2)	/* Page is cached (H) */
-#define _PAGE_EXECUTE       (1<<3)	/* Page has user execute perm (H) */
-#define _PAGE_WRITE         (1<<4)	/* Page has user write perm (H) */
-#define _PAGE_READ          (1<<5)	/* Page has user read perm (H) */
+#define _PAGE_U_EXECUTE     (1<<3)	/* Page has user execute perm (H) */
+#define _PAGE_U_WRITE       (1<<4)	/* Page has user write perm (H) */
+#define _PAGE_U_READ        (1<<5)	/* Page has user read perm (H) */
 #define _PAGE_K_EXECUTE     (1<<6)	/* Page has kernel execute perm (H) */
 #define _PAGE_K_WRITE       (1<<7)	/* Page has kernel write perm (H) */
 #define _PAGE_K_READ        (1<<8)	/* Page has kernel perm (H) */
@@ -72,9 +72,9 @@
 
 /* PD1 */
 #define _PAGE_CACHEABLE     (1<<0)	/* Page is cached (H) */
-#define _PAGE_EXECUTE       (1<<1)	/* Page has user execute perm (H) */
-#define _PAGE_WRITE         (1<<2)	/* Page has user write perm (H) */
-#define _PAGE_READ          (1<<3)	/* Page has user read perm (H) */
+#define _PAGE_U_EXECUTE     (1<<1)	/* Page has user execute perm (H) */
+#define _PAGE_U_WRITE       (1<<2)	/* Page has user write perm (H) */
+#define _PAGE_U_READ        (1<<3)	/* Page has user read perm (H) */
 #define _PAGE_K_EXECUTE     (1<<4)	/* Page has kernel execute perm (H) */
 #define _PAGE_K_WRITE       (1<<5)	/* Page has kernel write perm (H) */
 #define _PAGE_K_READ        (1<<6)	/* Page has kernel perm (H) */
@@ -93,7 +93,8 @@
 #endif
 
 /* Kernel allowed all permissions for all pages */
-#define _K_PAGE_PERMS  (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
+#define _K_PAGE_PERMS  (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ | \
+			_PAGE_GLOBAL | _PAGE_PRESENT)
 
 #ifdef CONFIG_ARC_CACHE_PAGES
 #define _PAGE_DEF_CACHEABLE _PAGE_CACHEABLE
@@ -106,7 +107,11 @@
  * -by default cached, unless config otherwise
  * -present in memory
  */
-#define ___DEF (_PAGE_PRESENT | _K_PAGE_PERMS | _PAGE_DEF_CACHEABLE)
+#define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE)
+
+#define _PAGE_READ	(_PAGE_U_READ    | _PAGE_K_READ)
+#define _PAGE_WRITE	(_PAGE_U_WRITE   | _PAGE_K_WRITE)
+#define _PAGE_EXECUTE	(_PAGE_U_EXECUTE | _PAGE_K_EXECUTE)
 
 /* Set of bits not changed in pte_modify */
 #define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED)
@@ -125,11 +130,10 @@
  * kernel vaddr space - visible in all addr spaces, but kernel mode only
  * Thus Global, all-kernel-access, no-user-access, cached
  */
-#define PAGE_KERNEL          __pgprot(___DEF | _PAGE_GLOBAL)
+#define PAGE_KERNEL          __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE)
 
 /* ioremap */
-#define PAGE_KERNEL_NO_CACHE __pgprot(_PAGE_PRESENT | _K_PAGE_PERMS | \
-						     _PAGE_GLOBAL)
+#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS)
 
 /**************************************************************************
  * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h
index 85b6df8..cb0c708 100644
--- a/arch/arc/include/asm/tlb.h
+++ b/arch/arc/include/asm/tlb.h
@@ -16,7 +16,7 @@
 /* Masks for actual TLB "PD"s */
 #define PTE_BITS_IN_PD0	(_PAGE_GLOBAL | _PAGE_PRESENT)
 #define PTE_BITS_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE | \
-			 _PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \
+			 _PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \
 			 _PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
 
 #ifndef __ASSEMBLY__
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c
index 2f12bca..aedce19 100644
--- a/arch/arc/mm/cache_arc700.c
+++ b/arch/arc/mm/cache_arc700.c
@@ -610,7 +610,7 @@
 
 	local_irq_save(flags);
 	__ic_line_inv_vaddr(paddr, vaddr, len);
-	__dc_line_op(paddr, vaddr, len, OP_FLUSH);
+	__dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV);
 	local_irq_restore(flags);
 }
 
@@ -676,6 +676,17 @@
 	flush_cache_all();
 }
 
+void flush_anon_page(struct vm_area_struct *vma, struct page *page,
+		     unsigned long u_vaddr)
+{
+	/* TBD: do we really need to clear the kernel mapping */
+	__flush_dcache_page(page_address(page), u_vaddr);
+	__flush_dcache_page(page_address(page), page_address(page));
+
+}
+
+#endif
+
 void copy_user_highpage(struct page *to, struct page *from,
 	unsigned long u_vaddr, struct vm_area_struct *vma)
 {
@@ -725,16 +736,6 @@
 	set_bit(PG_arch_1, &page->flags);
 }
 
-void flush_anon_page(struct vm_area_struct *vma, struct page *page,
-		     unsigned long u_vaddr)
-{
-	/* TBD: do we really need to clear the kernel mapping */
-	__flush_dcache_page(page_address(page), u_vaddr);
-	__flush_dcache_page(page_address(page), page_address(page));
-
-}
-
-#endif
 
 /**********************************************************************
  * Explicit Cache flush request from user space via syscall
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 066145b..fe1c5a0 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -444,7 +444,8 @@
 	 *	       so userspace sees the right data.
 	 *  (Avoids the flush for Non-exec + congruent mapping case)
 	 */
-	if (vma->vm_flags & VM_EXEC || addr_not_cache_congruent(paddr, vaddr)) {
+	if ((vma->vm_flags & VM_EXEC) ||
+	     addr_not_cache_congruent(paddr, vaddr)) {
 		struct page *page = pfn_to_page(pte_pfn(*ptep));
 
 		int dirty = test_and_clear_bit(PG_arch_1, &page->flags);
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index 9df765d..3357d26 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -277,7 +277,7 @@
 	;----------------------------------------------------------------
 	; VERIFY_PTE: Check if PTE permissions approp for executing code
 	cmp_s   r2, VMALLOC_START
-	mov.lo  r2, (_PAGE_PRESENT | _PAGE_READ | _PAGE_EXECUTE)
+	mov.lo  r2, (_PAGE_PRESENT | _PAGE_U_READ | _PAGE_U_EXECUTE)
 	mov.hs  r2, (_PAGE_PRESENT | _PAGE_K_READ | _PAGE_K_EXECUTE)
 
 	and     r3, r0, r2  ; Mask out NON Flag bits from PTE
@@ -320,9 +320,9 @@
 	mov_s   r2, 0
 	lr      r3, [ecr]
 	btst_s  r3, ECR_C_BIT_DTLB_LD_MISS	; Read Access
-	or.nz   r2, r2, _PAGE_READ      	; chk for Read flag in PTE
+	or.nz   r2, r2, _PAGE_U_READ      	; chk for Read flag in PTE
 	btst_s  r3, ECR_C_BIT_DTLB_ST_MISS	; Write Access
-	or.nz   r2, r2, _PAGE_WRITE     	; chk for Write flag in PTE
+	or.nz   r2, r2, _PAGE_U_WRITE     	; chk for Write flag in PTE
 	; Above laddering takes care of XCHG access
 	;   which is both Read and Write
 
diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c
index d356769..06cb309 100644
--- a/arch/arc/plat-tb10x/tb10x.c
+++ b/arch/arc/plat-tb10x/tb10x.c
@@ -34,31 +34,6 @@
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static void __init tb10x_platform_late_init(void)
-{
-	struct device_node *dn;
-
-	/*
-	 * Pinctrl documentation recommends setting up the iomux here for
-	 * all modules which don't require control over the pins themselves.
-	 * Modules which need this kind of assistance are compatible with
-	 * "abilis,simple-pinctrl", i.e. we can easily iterate over them.
-	 * TODO: Does this recommended method work cleanly with pins required
-	 * by modules?
-	 */
-	for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") {
-		struct platform_device *pd = of_find_device_by_node(dn);
-		struct pinctrl *pctl;
-
-		pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default");
-		if (IS_ERR(pctl)) {
-			int ret = PTR_ERR(pctl);
-			dev_err(&pd->dev, "Could not set up pinctrl: %d\n",
-				ret);
-		}
-	}
-}
-
 static const char *tb10x_compat[] __initdata = {
 	"abilis,arc-tb10x",
 	NULL,
@@ -67,5 +42,4 @@
 MACHINE_START(TB10x, "tb10x")
 	.dt_compat	= tb10x_compat,
 	.init_machine	= tb10x_platform_init,
-	.init_late	= tb10x_platform_late_init,
 MACHINE_END
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9f7121..f0895c5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -177,7 +177,9 @@
 	spear320-evb.dtb \
 	spear320-hmi.dtb
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
+dtb-$(CONFIG_ARCH_SUNXI) += \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-hackberry.dtb \
 	sun5i-a13-olinuxino.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 272bbc6..550eb77 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -33,7 +33,8 @@
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&mpic>;
-		ranges = <0 0 0xd0000000 0x100000>;
+		ranges = <0          0 0xd0000000 0x0100000 /* internal registers */
+			  0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>;
 
 		internal-regs {
 			compatible = "simple-bus";
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index b2c1b5a..aee2b18 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -29,7 +29,8 @@
 	};
 
 	soc {
-		ranges = <0 0xd0000000 0x100000>;
+		ranges = <0          0xd0000000 0x0100000 /* internal registers */
+			  0xe0000000 0xe0000000 0x8100000 /* PCIe */>;
 		internal-regs {
 			system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
@@ -38,12 +39,12 @@
 
 			L2: l2-cache {
 				compatible = "marvell,aurora-outer-cache";
-				reg = <0xd0008000 0x1000>;
+				reg = <0x08000 0x1000>;
 				cache-id-part = <0x100>;
 				wt-override;
 			};
 
-			mpic: interrupt-controller@20000 {
+			interrupt-controller@20000 {
 				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
 			};
 
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 26ad06f..3ee63d1 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -39,6 +39,9 @@
 	};
 
 	soc {
+		ranges = <0          0 0xd0000000 0x100000
+			  0xf0000000 0 0xf0000000 0x1000000>;
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <250000000>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index f14d36c..46b7850 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -27,6 +27,9 @@
 	};
 
 	soc {
+		ranges = <0          0 0xd0000000 0x100000
+			  0xf0000000 0 0xf0000000 0x8000000>;
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <250000000>;
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index bacab11..5b902f9 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -31,7 +31,7 @@
 				wt-override;
 			};
 
-			mpic: interrupt-controller@20000 {
+			interrupt-controller@20000 {
 			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 70b5ccb..84c4bef 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -264,7 +264,7 @@
 						atmel,pins =
 							<0 10 0x2 0x0	/* PA10 periph B */
 							 0 11 0x2 0x0	/* PA11 periph B */
-							 0 24 0x2 0x0	/* PA24 periph B */
+							 0 22 0x2 0x0	/* PA22 periph B */
 							 0 25 0x2 0x0	/* PA25 periph B */
 							 0 26 0x2 0x0	/* PA26 periph B */
 							 0 27 0x2 0x0	/* PA27 periph B */
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 3de8e6d..8d25f88 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -57,6 +57,7 @@
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
 				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
 			};
 
 			ramc0: ramc@ffffe800 {
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index 3b40d11..315250b 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -11,7 +11,7 @@
 /include/ "at91sam9x5ek.dtsi"
 
 / {
-	model = "Atmel AT91SAM9G25-EK";
+	model = "Atmel AT91SAM9X25-EK";
 	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	ahb {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 82a404d..99ba6e1 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -516,7 +516,7 @@
 		usb_otg_hs: usb_otg_hs@480ab000 {
 			compatible = "ti,omap3-musb";
 			reg = <0x480ab000 0x1000>;
-			interrupts = <0 92 0x4>, <0 93 0x4>;
+			interrupts = <92>, <93>;
 			interrupt-names = "mc", "dma";
 			ti,hwmods = "usb_otg_hs";
 			multipoint = <1>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 2e643ea..5000e0d 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -75,11 +75,6 @@
 				compatible = "atmel,at91sam9x5-spi";
 				reg = <0xf0004000 0x100>;
 				interrupts = <24 4 3>;
-				cs-gpios = <&pioD 13 0
-					    &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
-					    &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
-					    &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
-					   >;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
 				status = "disabled";
@@ -156,7 +151,7 @@
 			};
 
 			macb0: ethernet@f0028000 {
-				compatible = "cnds,pc302-gem", "cdns,gem";
+				compatible = "cdns,pc302-gem", "cdns,gem";
 				reg = <0xf0028000 0x100>;
 				interrupts = <34 4 3>;
 				pinctrl-names = "default";
@@ -203,11 +198,6 @@
 				compatible = "atmel,at91sam9x5-spi";
 				reg = <0xf8008000 0x100>;
 				interrupts = <25 4 3>;
-				cs-gpios = <&pioC 25 0
-					    &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
-					    &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
-					    &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
-					   >;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 1f8ed40..b336e77 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -32,6 +32,10 @@
 
 	ahb {
 		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
 			macb0: ethernet@f0028000 {
 				phy-mode = "rgmii";
 			};
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index b28fbf3..6f82d93 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -14,13 +14,19 @@
 		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
 	};
 
+	/* This is where the interrupt is routed on the S8815 board */
+	external-bus@34000000 {
+		ethernet@300 {
+			interrupt-parent = <&gpio3>;
+			interrupts = <8 0x1>;
+		};
+	};
+
 	/* Custom board node with GPIO pins to active etc */
 	usb-s8815 {
 		/* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
 		ethernet-gpio {
-			gpios = <&gpio3 19 0x1>;
-			interrupts = <19 0x1>;
-			interrupt-parent = <&gpio3>;
+			gpios = <&gpio3 8 0x1>;
 		};
 		/* This will bias the MMC/SD card detect line */
 		mmcsd-gpio {
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index 4a7c35d..078ed7f 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -22,8 +22,8 @@
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc {
-		uart0: uart@01c28000 {
+	soc@01c20000 {
+		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
 			status = "okay";
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7e0ebb6..9940f7b 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -199,7 +199,6 @@
 CONFIG_USB_DEBUG=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index c1ef64b..abbe319 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -20,6 +20,7 @@
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX_DEBUG=y
@@ -204,7 +205,6 @@
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index a5f0485..f7ba3161 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -153,6 +153,7 @@
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_DRM=y
+CONFIG_TEGRA_HOST1X=y
 CONFIG_DRM_TEGRA=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
@@ -202,7 +203,7 @@
 CONFIG_STAGING=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_ISL29028=y
-CONFIG_SENSORS_AK8975=y
+CONFIG_AK8975=y
 CONFIG_MFD_NVEC=y
 CONFIG_KEYBOARD_NVEC=y
 CONFIG_SERIO_NVEC_PS2=y
diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S
index 92c6eed..99207c4 100644
--- a/arch/arm/crypto/sha1-armv4-large.S
+++ b/arch/arm/crypto/sha1-armv4-large.S
@@ -195,6 +195,7 @@
 	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
 	cmp	r14,sp
 	bne	.L_00_15		@ [((11+4)*5+2)*3]
+	sub	sp,sp,#25*4
 #if __ARM_ARCH__<7
 	ldrb	r10,[r1,#2]
 	ldrb	r9,[r1,#3]
@@ -290,7 +291,6 @@
 	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
 
 	ldr	r8,.LK_20_39		@ [+15+16*4]
-	sub	sp,sp,#25*4
 	cmn	sp,#0			@ [+3], clear carry to denote 20_39
 .L_20_39_or_60_79:
 	ldr	r9,[r14,#15*4]
diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S
index 2848857..fbd24be 100644
--- a/arch/arm/include/debug/ux500.S
+++ b/arch/arm/include/debug/ux500.S
@@ -24,9 +24,9 @@
 #define U8500_UART0_PHYS_BASE	(0x80120000)
 #define U8500_UART1_PHYS_BASE	(0x80121000)
 #define U8500_UART2_PHYS_BASE	(0x80007000)
-#define U8500_UART0_VIRT_BASE	(0xa8120000)
-#define U8500_UART1_VIRT_BASE	(0xa8121000)
-#define U8500_UART2_VIRT_BASE	(0xa8007000)
+#define U8500_UART0_VIRT_BASE	(0xf8120000)
+#define U8500_UART1_VIRT_BASE	(0xf8121000)
+#define U8500_UART2_VIRT_BASE	(0xf8007000)
 #define __UX500_PHYS_UART(n)	U8500_UART##n##_PHYS_BASE
 #define __UX500_VIRT_UART(n)	U8500_UART##n##_VIRT_BASE
 #endif
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index f219703..282de48 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -411,7 +411,6 @@
 	.vm_start	= 0xffff0000,
 	.vm_end		= 0xffff0000 + PAGE_SIZE,
 	.vm_flags	= VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC,
-	.vm_mm		= &init_mm,
 };
 
 static int __init gate_vma_init(void)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 47ab905..550d63c 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -251,7 +251,7 @@
 	 * this returns, power and/or clocks can be removed at any point
 	 * from this CPU and its cache by platform_cpu_kill().
 	 */
-	RCU_NONIDLE(complete(&cpu_died));
+	complete(&cpu_died);
 
 	/*
 	 * Ensure that the cache lines associated with that completion are
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 2acdff4..180b302 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -174,6 +174,7 @@
 static struct clock_event_device clkevt = {
 	.name		= "at91_tick",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
 	.rating		= 150,
 	.set_next_event	= clkevt32k_next_event,
 	.set_mode	= clkevt32k_mode,
@@ -264,9 +265,11 @@
 	at91_st_write(AT91_ST_RTMR, 1);
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
+	clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
+	clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
+	clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
 	clkevt.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
-					2, AT91_ST_ALMV);
+	clockevents_register_device(&clkevt);
 
 	/* register clocksource */
 	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 13cdbcd..c7d670d 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -223,13 +223,7 @@
 	at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
 }
 
-void __init at91sam9n12_initialize(void)
-{
-	at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
-}
-
 AT91_SOC_START(at91sam9n12)
 	.map_io = at91sam9n12_map_io,
 	.register_clocks = at91sam9n12_register_clocks,
-	.init = at91sam9n12_initialize,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 31df120..2bd7f51 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -179,9 +179,9 @@
 #define		AT91_PMC_PCR_CMD	(0x1  <<  12)		/* Command (read=0, write=1) */
 #define		AT91_PMC_PCR_DIV(n)	((n)  <<  16)		/* Divisor Value */
 #define			AT91_PMC_PCR_DIV0	0x0			/* Peripheral clock is MCK */
-#define			AT91_PMC_PCR_DIV2	0x2			/* Peripheral clock is MCK/2 */
-#define			AT91_PMC_PCR_DIV4	0x4			/* Peripheral clock is MCK/4 */
-#define			AT91_PMC_PCR_DIV8	0x8			/* Peripheral clock is MCK/8 */
+#define			AT91_PMC_PCR_DIV2	0x1			/* Peripheral clock is MCK/2 */
+#define			AT91_PMC_PCR_DIV4	0x2			/* Peripheral clock is MCK/4 */
+#define			AT91_PMC_PCR_DIV8	0x3			/* Peripheral clock is MCK/8 */
 #define		AT91_PMC_PCR_EN		(0x1  <<  28)		/* Enable */
 
 #endif
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 1512590..dda9a2b 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -177,7 +177,8 @@
 static const char *step_sels[]	= { "osc", "pll2_pfd2_396m", };
 static const char *pll1_sw_sels[]	= { "pll1_sys", "step", };
 static const char *periph_pre_sels[]	= { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
-static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", };
+static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", "osc", "dummy", };
+static const char *periph2_clk2_sels[]	= { "pll3_usb_otg", "pll2_bus", };
 static const char *periph_sels[]	= { "periph_pre", "periph_clk2", };
 static const char *periph2_sels[]	= { "periph2_pre", "periph2_clk2", };
 static const char *axi_sels[]		= { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
@@ -185,7 +186,7 @@
 static const char *gpu_axi_sels[]	= { "axi", "ahb", };
 static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
 static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
-static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
+static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
 static const char *ipu_sels[]		= { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
 static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
 static const char *ipu_di_pre_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
@@ -369,8 +370,8 @@
 	clk[pll1_sw]          = imx_clk_mux("pll1_sw",	        base + 0xc,  2,  1, pll1_sw_sels,      ARRAY_SIZE(pll1_sw_sels));
 	clk[periph_pre]       = imx_clk_mux("periph_pre",       base + 0x18, 18, 2, periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
 	clk[periph2_pre]      = imx_clk_mux("periph2_pre",      base + 0x18, 21, 2, periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
-	clk[periph_clk2_sel]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 1, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
-	clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
+	clk[periph_clk2_sel]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 2, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
+	clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
 	clk[axi_sel]          = imx_clk_mux("axi_sel",          base + 0x14, 6,  2, axi_sels,          ARRAY_SIZE(axi_sels));
 	clk[esai_sel]         = imx_clk_mux("esai_sel",         base + 0x20, 19, 2, audio_sels,        ARRAY_SIZE(audio_sels));
 	clk[asrc_sel]         = imx_clk_mux("asrc_sel",         base + 0x30, 7,  2, audio_sels,        ARRAY_SIZE(audio_sels));
@@ -498,7 +499,7 @@
 	clk[ldb_di1]      = imx_clk_gate2("ldb_di1",       "ldb_di1_podf",      base + 0x74, 14);
 	clk[ipu2_di1]     = imx_clk_gate2("ipu2_di1",      "ipu2_di1_sel",      base + 0x74, 10);
 	clk[hsi_tx]       = imx_clk_gate2("hsi_tx",        "hsi_tx_podf",       base + 0x74, 16);
-	clk[mlb]          = imx_clk_gate2("mlb",           "pll8_mlb",          base + 0x74, 18);
+	clk[mlb]          = imx_clk_gate2("mlb",           "axi",               base + 0x74, 18);
 	clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi",  "mmdc_ch0_axi_podf", base + 0x74, 20);
 	clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi",  "mmdc_ch1_axi_podf", base + 0x74, 22);
 	clk[ocram]        = imx_clk_gate2("ocram",         "ahb",               base + 0x74, 28);
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index 67b9c48..627f16f 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -18,8 +18,20 @@
 	.section ".text.head", "ax"
 
 #ifdef CONFIG_SMP
+diag_reg_offset:
+	.word	g_diag_reg - .
+
+	.macro	set_diag_reg
+	adr	r0, diag_reg_offset
+	ldr	r1, [r0]
+	add	r1, r1, r0		@ r1 = physical &g_diag_reg
+	ldr	r0, [r1]
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+	.endm
+
 ENTRY(v7_secondary_startup)
 	bl	v7_invalidate_l1
+	set_diag_reg
 	b	secondary_startup
 ENDPROC(v7_secondary_startup)
 #endif
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 4a69305..c6e1ab5 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -12,6 +12,7 @@
 
 #include <linux/init.h>
 #include <linux/smp.h>
+#include <asm/cacheflush.h>
 #include <asm/page.h>
 #include <asm/smp_scu.h>
 #include <asm/mach/map.h>
@@ -21,6 +22,7 @@
 
 #define SCU_STANDBY_ENABLE	(1 << 5)
 
+u32 g_diag_reg;
 static void __iomem *scu_base;
 
 static struct map_desc scu_io_desc __initdata = {
@@ -80,6 +82,18 @@
 static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
 {
 	imx_smp_prepare();
+
+	/*
+	 * The diagnostic register holds the errata bits.  Mostly bootloader
+	 * does not bring up secondary cores, so that when errata bits are set
+	 * in bootloader, they are set only for boot cpu.  But on a SMP
+	 * configuration, it should be equally done on every single core.
+	 * Read the register from boot cpu here, and will replicate it into
+	 * secondary cores when booting them.
+	 */
+	asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc");
+	__cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg));
+	outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1));
 }
 
 struct smp_operations  imx_smp_ops __initdata = {
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c2cae69..f389228 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -528,12 +528,6 @@
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
 
-	/*
-	 * Some Kirkwood devices allocate their coherent buffers from atomic
-	 * context. Increase size of atomic coherent pool to make sure such
-	 * the allocations won't fail.
-	 */
-	init_dma_coherent_pool_size(SZ_1M);
 	mvebu_mbus_init("marvell,kirkwood-mbus",
 			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
 			DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 283abff..e1267d6 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -124,7 +124,7 @@
 static int __init ts219_pci_init(void)
 {
 	if (machine_is_ts219())
-		kirkwood_pcie_init(KW_PCIE0);
+		kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index e11acbb..80a8bca 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -15,6 +15,7 @@
 	select MVEBU_CLK_GATING
 	select MVEBU_MBUS
 	select ZONE_DMA if ARM_LPAE
+	select ARCH_REQUIRE_GPIOLIB
 
 if ARCH_MVEBU
 
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 42a4cb3..1c48890 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -54,13 +54,6 @@
 	char *mbus_soc_name;
 
 	/*
-	 * Some Armada 370/XP devices allocate their coherent buffers
-	 * from atomic context. Increase size of atomic coherent pool
-	 * to make sure such the allocations won't fail.
-	 */
-	init_dma_coherent_pool_size(SZ_1M);
-
-	/*
 	 * This initialization will be replaced by a DT-based
 	 * initialization once the mvebu-mbus driver gains DT support.
 	 */
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 68ab858..a94b3a7 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -345,6 +345,7 @@
 		dev_err(&pdev->dev,
 			"%s: Memory allocation failed for d->chan!\n",
 			__func__);
+		ret = -ENOMEM;
 		goto exit_release_d;
 	}
 
diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c
index 6ebc780..af3544c 100644
--- a/arch/arm/mach-omap2/cclock33xx_data.c
+++ b/arch/arm/mach-omap2/cclock33xx_data.c
@@ -454,9 +454,29 @@
  */
 DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732);
 
-DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0,
-		AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
+static struct clk clkdiv32k_ick;
+
+static const char *clkdiv32k_ick_parent_names[] = {
+	"clkdiv32k_ck",
+};
+
+static const struct clk_ops clkdiv32k_ick_ops = {
+	.enable         = &omap2_dflt_clk_enable,
+	.disable        = &omap2_dflt_clk_disable,
+	.is_enabled     = &omap2_dflt_clk_is_enabled,
+	.init           = &omap2_init_clk_clkdm,
+};
+
+static struct clk_hw_omap clkdiv32k_ick_hw = {
+	.hw	= {
+		.clk	= &clkdiv32k_ick,
+	},
+	.enable_reg	= AM33XX_CM_PER_CLKDIV32K_CLKCTRL,
+	.enable_bit	= AM33XX_MODULEMODE_SWCTRL_SHIFT,
+	.clkdm_name	= "clk_24mhz_clkdm",
+};
+
+DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops);
 
 /* "usbotg_fck" is an additional clock and not really a modulemode */
 DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d25a95f..7341eff 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1356,13 +1356,27 @@
 
 	clkdm = _get_clkdm(oh);
 	if (sf & SYSC_HAS_SIDLEMODE) {
+		if (oh->flags & HWMOD_SWSUP_SIDLE ||
+		    oh->flags & HWMOD_SWSUP_SIDLE_ACT) {
+			idlemode = HWMOD_IDLEMODE_NO;
+		} else {
+			if (sf & SYSC_HAS_ENAWAKEUP)
+				_enable_wakeup(oh, &v);
+			if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+				idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+			else
+				idlemode = HWMOD_IDLEMODE_SMART;
+		}
+
+		/*
+		 * This is special handling for some IPs like
+		 * 32k sync timer. Force them to idle!
+		 */
 		clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU);
 		if (clkdm_act && !(oh->class->sysc->idlemodes &
 				   (SIDLE_SMART | SIDLE_SMART_WKUP)))
 			idlemode = HWMOD_IDLEMODE_FORCE;
-		else
-			idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
-				HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+
 		_set_slave_idlemode(oh, idlemode, &v);
 	}
 
@@ -1391,10 +1405,6 @@
 	    (sf & SYSC_HAS_CLOCKACTIVITY))
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
-	/* If slave is in SMARTIDLE, also enable wakeup */
-	if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
-		_enable_wakeup(oh, &v);
-
 	_write_sysconfig(v, oh);
 
 	/*
@@ -1430,13 +1440,16 @@
 	sf = oh->class->sysc->sysc_flags;
 
 	if (sf & SYSC_HAS_SIDLEMODE) {
-		/* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
-		if (oh->flags & HWMOD_SWSUP_SIDLE ||
-		    !(oh->class->sysc->idlemodes &
-		      (SIDLE_SMART | SIDLE_SMART_WKUP)))
+		if (oh->flags & HWMOD_SWSUP_SIDLE) {
 			idlemode = HWMOD_IDLEMODE_FORCE;
-		else
-			idlemode = HWMOD_IDLEMODE_SMART;
+		} else {
+			if (sf & SYSC_HAS_ENAWAKEUP)
+				_enable_wakeup(oh, &v);
+			if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+				idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+			else
+				idlemode = HWMOD_IDLEMODE_SMART;
+		}
 		_set_slave_idlemode(oh, idlemode, &v);
 	}
 
@@ -1455,10 +1468,6 @@
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
-	/* If slave is in SMARTIDLE, also enable wakeup */
-	if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
-		_enable_wakeup(oh, &v);
-
 	_write_sysconfig(v, oh);
 }
 
@@ -2065,7 +2074,7 @@
  * do so is present in the hwmod data, then call it and pass along the
  * return value; otherwise, return 0.
  */
-static int __init _enable_preprogram(struct omap_hwmod *oh)
+static int _enable_preprogram(struct omap_hwmod *oh)
 {
 	if (!oh->class->enable_preprogram)
 		return 0;
@@ -2246,42 +2255,6 @@
 }
 
 /**
- * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit
- * @oh: struct omap_hwmod *
- * @autoidle: desired AUTOIDLE bitfield value (0 or 1)
- *
- * Sets the IP block's OCP autoidle bit in hardware, and updates our
- * local copy. Intended to be used by drivers that require
- * direct manipulation of the AUTOIDLE bits.
- * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes
- * along the return value from _set_module_autoidle().
- *
- * Any users of this function should be scrutinized carefully.
- */
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle)
-{
-	u32 v;
-	int retval = 0;
-	unsigned long flags;
-
-	if (!oh || oh->_state != _HWMOD_STATE_ENABLED)
-		return -EINVAL;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-
-	v = oh->_sysc_cache;
-
-	retval = _set_module_autoidle(oh, autoidle, &v);
-
-	if (!retval)
-		_write_sysconfig(v, oh);
-
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return retval;
-}
-
-/**
  * _shutdown - shutdown an omap_hwmod
  * @oh: struct omap_hwmod *
  *
@@ -3180,38 +3153,6 @@
 }
 
 /**
- * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
- * @oh: struct omap_hwmod *
- * @idlemode: SIDLEMODE field bits (shifted to bit 0)
- *
- * Sets the IP block's OCP slave idlemode in hardware, and updates our
- * local copy.  Intended to be used by drivers that have some erratum
- * that requires direct manipulation of the SIDLEMODE bits.  Returns
- * -EINVAL if @oh is null, or passes along the return value from
- * _set_slave_idlemode().
- *
- * XXX Does this function have any current users?  If not, we should
- * remove it; it is better to let the rest of the hwmod code handle this.
- * Any users of this function should be scrutinized carefully.
- */
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
-{
-	u32 v;
-	int retval = 0;
-
-	if (!oh)
-		return -EINVAL;
-
-	v = oh->_sysc_cache;
-
-	retval = _set_slave_idlemode(oh, idlemode, &v);
-	if (!retval)
-		_write_sysconfig(v, oh);
-
-	return retval;
-}
-
-/**
  * omap_hwmod_lookup - look up a registered omap_hwmod by name
  * @name: name of the omap_hwmod to look up
  *
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index fe59629..0c898f5 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -463,6 +463,9 @@
  *     is kept in force-standby mode. Failing to do so causes PM problems
  *     with musb on OMAP3630 at least. Note that musb has a dedicated register
  *     to control MSTANDBY signal when MIDLEMODE is set to force-standby.
+ * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module
+ *     out of idle, but rely on smart-idle to the put it back in idle,
+ *     so the wakeups are still functional (Only known case for now is UART)
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -476,6 +479,7 @@
 #define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
 #define HWMOD_BLOCK_WFI				(1 << 10)
 #define HWMOD_FORCE_MSTANDBY			(1 << 11)
+#define HWMOD_SWSUP_SIDLE_ACT			(1 << 12)
 
 /*
  * omap_hwmod._int_flags definitions
@@ -641,9 +645,6 @@
 int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
 int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
 
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
-
 int omap_hwmod_reset(struct omap_hwmod *oh);
 void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index c8c64b3..d05fc7b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -512,6 +512,7 @@
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
 	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -531,6 +532,7 @@
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
 	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -550,6 +552,7 @@
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
 	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 01d8f32..075f7cc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -1995,6 +1995,7 @@
 	.name		= "uart1",
 	.class		= &uart_class,
 	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart1_irqs,
 	.sdma_reqs	= uart1_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
@@ -2015,6 +2016,7 @@
 	.name		= "uart2",
 	.class		= &uart_class,
 	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart2_irqs,
 	.sdma_reqs	= uart1_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",
@@ -2042,6 +2044,7 @@
 	.name		= "uart3",
 	.class		= &uart_class,
 	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart3_irqs,
 	.sdma_reqs	= uart3_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",
@@ -2062,6 +2065,7 @@
 	.name		= "uart4",
 	.class		= &uart_class,
 	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart4_irqs,
 	.sdma_reqs	= uart1_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",
@@ -2082,6 +2086,7 @@
 	.name		= "uart5",
 	.class		= &uart_class,
 	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart5_irqs,
 	.sdma_reqs	= uart1_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",
@@ -2102,6 +2107,7 @@
 	.name		= "uart6",
 	.class		= &uart_class,
 	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart6_irqs,
 	.sdma_reqs	= uart1_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 4083606..31c7126 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -490,6 +490,7 @@
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
 	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -508,6 +509,7 @@
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
 	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -526,6 +528,7 @@
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
 	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = OMAP3430_PER_MOD,
@@ -555,6 +558,7 @@
 	.mpu_irqs	= uart4_mpu_irqs,
 	.sdma_reqs	= uart4_sdma_reqs,
 	.main_clk	= "uart4_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = OMAP3430_PER_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index eaba9dc..848b6dc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -3434,6 +3434,7 @@
 	.name		= "uart1",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= omap44xx_uart1_irqs,
 	.sdma_reqs	= omap44xx_uart1_sdma_reqs,
 	.main_clk	= "func_48m_fclk",
@@ -3462,6 +3463,7 @@
 	.name		= "uart2",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= omap44xx_uart2_irqs,
 	.sdma_reqs	= omap44xx_uart2_sdma_reqs,
 	.main_clk	= "func_48m_fclk",
@@ -3490,7 +3492,8 @@
 	.name		= "uart3",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
+				HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= omap44xx_uart3_irqs,
 	.sdma_reqs	= omap44xx_uart3_sdma_reqs,
 	.main_clk	= "func_48m_fclk",
@@ -3519,6 +3522,7 @@
 	.name		= "uart4",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= omap44xx_uart4_irqs,
 	.sdma_reqs	= omap44xx_uart4_sdma_reqs,
 	.main_clk	= "func_48m_fclk",
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 8396b5b..f660156 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -95,38 +95,9 @@
 		omap_hwmod_disable_wakeup(od->hwmods[0]);
 }
 
-/*
- * Errata i291: [UART]:Cannot Acknowledge Idle Requests
- * in Smartidle Mode When Configured for DMA Operations.
- * WA: configure uart in force idle mode.
- */
-static void omap_uart_set_noidle(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-
-	omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
-}
-
-static void omap_uart_set_smartidle(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-	u8 idlemode;
-
-	if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
-		idlemode = HWMOD_IDLEMODE_SMART_WKUP;
-	else
-		idlemode = HWMOD_IDLEMODE_SMART;
-
-	omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
-}
-
 #else
 static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 {}
-static void omap_uart_set_noidle(struct device *dev) {}
-static void omap_uart_set_smartidle(struct device *dev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
@@ -299,8 +270,6 @@
 	omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
 	omap_up.flags = UPF_BOOT_AUTOCONF;
 	omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
-	omap_up.set_forceidle = omap_uart_set_smartidle;
-	omap_up.set_noidle = omap_uart_set_noidle;
 	omap_up.enable_wakeup = omap_uart_enable_wakeup;
 	omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
 	omap_up.dma_rx_timeout = info->dma_rx_timeout;
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index b97fd67..f8a6db9 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -199,13 +199,6 @@
 
 	orion_time_set_base(TIMER_VIRT_BASE);
 
-	/*
-	 * Some Orion5x devices allocate their coherent buffers from atomic
-	 * context. Increase size of atomic coherent pool to make sure such
-	 * the allocations won't fail.
-	 */
-	init_dma_coherent_pool_size(SZ_1M);
-
 	/* Initialize the MBUS driver */
 	orion5x_pcie_id(&dev, &rev);
 	if (dev == MV88F5281_DEV_ID)
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 9105285..b9594e9 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -212,8 +212,8 @@
 static struct usb_phy *phy;
 static int usb_power_on(struct platform_device *pdev)
 {
-	if (!phy)
-		return -EIO;
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
 
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
@@ -225,7 +225,7 @@
 
 static void usb_power_off(struct platform_device *pdev)
 {
-	if (!phy)
+	if (IS_ERR(phy))
 		return;
 
 	usb_phy_shutdown(phy);
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index d259c78..5b045e3 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,5 +1,6 @@
 config ARCH_SUNXI
 	bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
+	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select COMMON_CLK
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 6a4387e..b19b072 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -51,6 +51,7 @@
 	bool "U8500 Development platform, MOP500 versions"
 	select I2C
 	select I2C_NOMADIK
+	select REGULATOR
 	select REGULATOR_FIXED_VOLTAGE
 	select SOC_BUS
 	select UX500_SOC_DB8500
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 3cd555a..78389de 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -623,7 +623,7 @@
 	sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL;
 
 	mop500_pinmaps_init();
-	parent = u8500_init_devices(&ab8500_platdata);
+	parent = u8500_init_devices();
 
 	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
 		mop500_platform_devs[i]->dev.parent = parent;
@@ -660,7 +660,7 @@
 	sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO;
 
 	snowball_pinmaps_init();
-	parent = u8500_init_devices(&ab8500_platdata);
+	parent = u8500_init_devices();
 
 	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
 		snowball_platform_devs[i]->dev.parent = parent;
@@ -698,7 +698,7 @@
 	sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO;
 
 	hrefv60_pinmaps_init();
-	parent = u8500_init_devices(&ab8500_platdata);
+	parent = u8500_init_devices();
 
 	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
 		mop500_platform_devs[i]->dev.parent = parent;
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index e90b5ab..46cca52 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -206,7 +206,7 @@
 /*
  * This function is called from the board init
  */
-struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
+struct device * __init u8500_init_devices(void)
 {
 	struct device *parent;
 	int i;
@@ -220,8 +220,6 @@
 	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
 		platform_devs[i]->dev.parent = parent;
 
-	db8500_prcmu_device.dev.platform_data = ab8500;
-
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
 	return parent;
@@ -278,7 +276,7 @@
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
 	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
 			&db8500_prcmu_pdata),
-	OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL),
+	OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
 		"pinctrl-db8500", NULL),
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index bddce2b..cad3ca8 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -18,7 +18,7 @@
 void __init ux500_map_io(void);
 extern void __init u8500_map_io(void);
 
-extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500);
+extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
 extern void __init ux500_init_late(void);
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 1dd281e..f5c33df 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -173,6 +173,7 @@
 	"wm,wm8505",
 	"wm,wm8750",
 	"wm,wm8850",
+	NULL
 };
 
 DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 251f827..c019b7a 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -383,7 +383,7 @@
 
 static struct platform_device orion_ge10_shared = {
 	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 1,
+	.id		= 2,
 	.dev		= {
 		.platform_data	= &orion_ge10_shared_data,
 	},
@@ -398,8 +398,8 @@
 
 static struct platform_device orion_ge10 = {
 	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= 2,
+	.id		= 2,
+	.num_resources	= 1,
 	.resource	= orion_ge10_resources,
 	.dev		= {
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
@@ -432,7 +432,7 @@
 
 static struct platform_device orion_ge11_shared = {
 	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 1,
+	.id		= 3,
 	.dev		= {
 		.platform_data	= &orion_ge11_shared_data,
 	},
@@ -447,8 +447,8 @@
 
 static struct platform_device orion_ge11 = {
 	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= 2,
+	.id		= 3,
+	.num_resources	= 1,
 	.resource	= orion_ge11_resources,
 	.dev		= {
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index e06fc5f..d9a24f6 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -10,6 +10,7 @@
 
 #ifndef __PLAT_COMMON_H
 #include <linux/mv643xx_eth.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 
 struct dsa_platform_data;
 struct mv_sata_platform_data;
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 323ce1a..46e1749 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -60,7 +60,7 @@
 	str	r11, [r10, #TI_PREEMPT]
 #endif
 	ldr	r0, VFP_arch_address
-	str	r5, [r0]		@ known non-zero value
+	str	r0, [r0]		@ set to non-zero value
 	mov	pc, r9			@ we have handled the fault
 ENDPROC(vfp_testing_entry)
 
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index bdc3558..549903c 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -205,6 +205,11 @@
 config ARCH_SPARSEMEM_ENABLE
 	def_bool n
 
+config NODES_SHIFT
+	int
+	default "2"
+	depends on NEED_MULTIPLE_NODES
+
 source "mm/Kconfig"
 
 config OWNERSHIP_TRACE
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
index 4dd4f78..d22af85 100644
--- a/arch/avr32/include/asm/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
@@ -2,3 +2,4 @@
 generic-y	+= clkdev.h
 generic-y	+= exec.h
 generic-y	+= trace_clock.h
+generic-y	+= param.h
diff --git a/arch/avr32/include/asm/numnodes.h b/arch/avr32/include/asm/numnodes.h
deleted file mode 100644
index 0b864d7..0000000
--- a/arch/avr32/include/asm/numnodes.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_AVR32_NUMNODES_H
-#define __ASM_AVR32_NUMNODES_H
-
-/* Max 4 nodes */
-#define NODES_SHIFT	2
-
-#endif /* __ASM_AVR32_NUMNODES_H */
diff --git a/arch/avr32/include/asm/param.h b/arch/avr32/include/asm/param.h
deleted file mode 100644
index 009a167..0000000
--- a/arch/avr32/include/asm/param.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_AVR32_PARAM_H
-#define __ASM_AVR32_PARAM_H
-
-#include <uapi/asm/param.h>
-
-# define HZ		CONFIG_HZ
-# define USER_HZ	100		/* User interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif /* __ASM_AVR32_PARAM_H */
diff --git a/arch/avr32/include/uapi/asm/Kbuild b/arch/avr32/include/uapi/asm/Kbuild
index df53e7a..3b85ead 100644
--- a/arch/avr32/include/uapi/asm/Kbuild
+++ b/arch/avr32/include/uapi/asm/Kbuild
@@ -33,3 +33,4 @@
 header-y += termios.h
 header-y += types.h
 header-y += unistd.h
+generic-y += param.h
diff --git a/arch/avr32/include/uapi/asm/param.h b/arch/avr32/include/uapi/asm/param.h
deleted file mode 100644
index d28aa5e..0000000
--- a/arch/avr32/include/uapi/asm/param.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _UAPI__ASM_AVR32_PARAM_H
-#define _UAPI__ASM_AVR32_PARAM_H
-
-
-#ifndef HZ
-# define HZ		100
-#endif
-
-/* TODO: Should be configurable */
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-# define NOGROUP	(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64
-
-#endif /* _UAPI__ASM_AVR32_PARAM_H */
diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
index 596f730..2c94129 100644
--- a/arch/avr32/kernel/module.c
+++ b/arch/avr32/kernel/module.c
@@ -264,7 +264,7 @@
 			break;
 		case R_AVR32_GOT18SW:
 			if ((relocation & 0xfffe0003) != 0
-			    && (relocation & 0xfffc0003) != 0xffff0000)
+			    && (relocation & 0xfffc0000) != 0xfffc0000)
 				return reloc_overflow(module, "R_AVR32_GOT18SW",
 						     relocation);
 			relocation >>= 2;
diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c
index cb0f6af..9edc35f 100644
--- a/arch/mips/alchemy/board-gpr.c
+++ b/arch/mips/alchemy/board-gpr.c
@@ -31,6 +31,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <asm/bootinfo.h>
+#include <asm/idle.h>
 #include <asm/reboot.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <prom.h>
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 38afb11..93fa586 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -36,6 +36,7 @@
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 
+#include <asm/idle.h>
 #include <asm/processor.h>
 #include <asm/time.h>
 #include <asm/mach-au1x00/au1000.h>
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index a0233a2..8be4e85 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 
 #include <asm/bootinfo.h>
+#include <asm/idle.h>
 #include <asm/time.h>		/* for mips_hpt_frequency */
 #include <asm/reboot.h>		/* for _machine_{restart,halt} */
 #include <asm/mips_machine.h>
diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c
index 516b442..4eedd48 100644
--- a/arch/mips/cobalt/reset.c
+++ b/arch/mips/cobalt/reset.c
@@ -12,6 +12,7 @@
 #include <linux/io.h>
 #include <linux/leds.h>
 
+#include <asm/idle.h>
 #include <asm/processor.h>
 
 #include <cobalt.h>
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index face9d2..bac26b9 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -228,7 +228,6 @@
 CONFIG_USB_HID=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB=y
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
diff --git a/arch/mips/configs/db1235_defconfig b/arch/mips/configs/db1235_defconfig
index 14752dd..e2b4ad5 100644
--- a/arch/mips/configs/db1235_defconfig
+++ b/arch/mips/configs/db1235_defconfig
@@ -344,7 +344,6 @@
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index b6acd2f..343bebc 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -300,7 +300,6 @@
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_OTG_WHITELIST=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h
index c9456e7..778e32d 100644
--- a/arch/mips/include/asm/clock.h
+++ b/arch/mips/include/asm/clock.h
@@ -6,8 +6,6 @@
 #include <linux/seq_file.h>
 #include <linux/clk.h>
 
-extern void (*cpu_wait) (void);
-
 struct clk;
 
 struct clk_ops {
diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h
new file mode 100644
index 0000000..d192158
--- /dev/null
+++ b/arch/mips/include/asm/idle.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_IDLE_H
+#define __ASM_IDLE_H
+
+#include <linux/linkage.h>
+
+extern void (*cpu_wait)(void);
+extern void r4k_wait(void);
+extern asmlinkage void __r4k_wait(void);
+extern void r4k_wait_irqoff(void);
+extern void __pastwait(void);
+
+static inline int using_rollback_handler(void)
+{
+	return cpu_wait == r4k_wait;
+}
+
+static inline int address_is_in_r4k_wait_irqoff(unsigned long addr)
+{
+	return addr >= (unsigned long)r4k_wait_irqoff &&
+	       addr < (unsigned long)__pastwait;
+}
+
+#endif /* __ASM_IDLE_H  */
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index ec1ca53..f59552f 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -171,14 +171,13 @@
 
 #ifdef CONFIG_FLATMEM
 
-#define pfn_valid(pfn)							\
-({									\
-	unsigned long __pfn = (pfn);					\
-	/* avoid <linux/bootmem.h> include hell */			\
-	extern unsigned long min_low_pfn;				\
-									\
-	__pfn >= min_low_pfn && __pfn < max_mapnr;			\
-})
+static inline int pfn_valid(unsigned long pfn)
+{
+	/* avoid <linux/mm.h> include hell */
+	extern unsigned long max_mapnr;
+
+	return pfn >= ARCH_PFN_OFFSET && pfn < max_mapnr;
+}
 
 #elif defined(CONFIG_SPARSEMEM)
 
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 71686c8..1470b7b 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -28,7 +28,6 @@
 /*
  * System setup and hardware flags..
  */
-extern void (*cpu_wait)(void);
 
 extern unsigned int vced_count, vcei_count;
 
diff --git a/arch/mips/include/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h
similarity index 100%
rename from arch/mips/include/asm/kvm.h
rename to arch/mips/include/uapi/asm/kvm.h
diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index 16338b8..1dee279 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -694,16 +694,17 @@
 #define __NR_process_vm_writev		(__NR_Linux + 305)
 #define __NR_kcmp			(__NR_Linux + 306)
 #define __NR_finit_module		(__NR_Linux + 307)
+#define __NR_getdents64			(__NR_Linux + 308)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		307
+#define __NR_Linux_syscalls		308
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		307
+#define __NR_64_Linux_syscalls		308
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 6ad9e04..423d871 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -4,7 +4,7 @@
 
 extra-y		:= head.o vmlinux.lds
 
-obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
+obj-y		+= cpu-probe.o branch.o entry.o genex.o idle.o irq.o process.o \
 		   prom.o ptrace.o reset.o setup.o signal.o syscall.o \
 		   time.o topology.o traps.o unaligned.o watch.o vdso.o
 
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 4bbffdb..c6568bf 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -27,105 +27,6 @@
 #include <asm/spram.h>
 #include <asm/uaccess.h>
 
-/*
- * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
- * the implementation of the "wait" feature differs between CPU families. This
- * points to the function that implements CPU specific wait.
- * The wait instruction stops the pipeline and reduces the power consumption of
- * the CPU very much.
- */
-void (*cpu_wait)(void);
-EXPORT_SYMBOL(cpu_wait);
-
-static void r3081_wait(void)
-{
-	unsigned long cfg = read_c0_conf();
-	write_c0_conf(cfg | R30XX_CONF_HALT);
-}
-
-static void r39xx_wait(void)
-{
-	local_irq_disable();
-	if (!need_resched())
-		write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
-	local_irq_enable();
-}
-
-extern void r4k_wait(void);
-
-/*
- * This variant is preferable as it allows testing need_resched and going to
- * sleep depending on the outcome atomically.  Unfortunately the "It is
- * implementation-dependent whether the pipeline restarts when a non-enabled
- * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
- * using this version a gamble.
- */
-void r4k_wait_irqoff(void)
-{
-	local_irq_disable();
-	if (!need_resched())
-		__asm__("	.set	push		\n"
-			"	.set	mips3		\n"
-			"	wait			\n"
-			"	.set	pop		\n");
-	local_irq_enable();
-	__asm__("	.globl __pastwait	\n"
-		"__pastwait:			\n");
-}
-
-/*
- * The RM7000 variant has to handle erratum 38.	 The workaround is to not
- * have any pending stores when the WAIT instruction is executed.
- */
-static void rm7k_wait_irqoff(void)
-{
-	local_irq_disable();
-	if (!need_resched())
-		__asm__(
-		"	.set	push					\n"
-		"	.set	mips3					\n"
-		"	.set	noat					\n"
-		"	mfc0	$1, $12					\n"
-		"	sync						\n"
-		"	mtc0	$1, $12		# stalls until W stage	\n"
-		"	wait						\n"
-		"	mtc0	$1, $12		# stalls until W stage	\n"
-		"	.set	pop					\n");
-	local_irq_enable();
-}
-
-/*
- * The Au1xxx wait is available only if using 32khz counter or
- * external timer source, but specifically not CP0 Counter.
- * alchemy/common/time.c may override cpu_wait!
- */
-static void au1k_wait(void)
-{
-	__asm__("	.set	mips3			\n"
-		"	cache	0x14, 0(%0)		\n"
-		"	cache	0x14, 32(%0)		\n"
-		"	sync				\n"
-		"	nop				\n"
-		"	wait				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	.set	mips0			\n"
-		: : "r" (au1k_wait));
-}
-
-static int __initdata nowait;
-
-static int __init wait_disable(char *s)
-{
-	nowait = 1;
-
-	return 1;
-}
-
-__setup("nowait", wait_disable);
-
 static int __cpuinitdata mips_fpu_disabled;
 
 static int __init fpu_disable(char *s)
@@ -150,105 +51,6 @@
 
 __setup("nodsp", dsp_disable);
 
-void __init check_wait(void)
-{
-	struct cpuinfo_mips *c = &current_cpu_data;
-
-	if (nowait) {
-		printk("Wait instruction disabled.\n");
-		return;
-	}
-
-	switch (c->cputype) {
-	case CPU_R3081:
-	case CPU_R3081E:
-		cpu_wait = r3081_wait;
-		break;
-	case CPU_TX3927:
-		cpu_wait = r39xx_wait;
-		break;
-	case CPU_R4200:
-/*	case CPU_R4300: */
-	case CPU_R4600:
-	case CPU_R4640:
-	case CPU_R4650:
-	case CPU_R4700:
-	case CPU_R5000:
-	case CPU_R5500:
-	case CPU_NEVADA:
-	case CPU_4KC:
-	case CPU_4KEC:
-	case CPU_4KSC:
-	case CPU_5KC:
-	case CPU_25KF:
-	case CPU_PR4450:
-	case CPU_BMIPS3300:
-	case CPU_BMIPS4350:
-	case CPU_BMIPS4380:
-	case CPU_BMIPS5000:
-	case CPU_CAVIUM_OCTEON:
-	case CPU_CAVIUM_OCTEON_PLUS:
-	case CPU_CAVIUM_OCTEON2:
-	case CPU_JZRISC:
-	case CPU_LOONGSON1:
-	case CPU_XLR:
-	case CPU_XLP:
-		cpu_wait = r4k_wait;
-		break;
-
-	case CPU_RM7000:
-		cpu_wait = rm7k_wait_irqoff;
-		break;
-
-	case CPU_M14KC:
-	case CPU_M14KEC:
-	case CPU_24K:
-	case CPU_34K:
-	case CPU_1004K:
-		cpu_wait = r4k_wait;
-		if (read_c0_config7() & MIPS_CONF7_WII)
-			cpu_wait = r4k_wait_irqoff;
-		break;
-
-	case CPU_74K:
-		cpu_wait = r4k_wait;
-		if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
-			cpu_wait = r4k_wait_irqoff;
-		break;
-
-	case CPU_TX49XX:
-		cpu_wait = r4k_wait_irqoff;
-		break;
-	case CPU_ALCHEMY:
-		cpu_wait = au1k_wait;
-		break;
-	case CPU_20KC:
-		/*
-		 * WAIT on Rev1.0 has E1, E2, E3 and E16.
-		 * WAIT on Rev2.0 and Rev3.0 has E16.
-		 * Rev3.1 WAIT is nop, why bother
-		 */
-		if ((c->processor_id & 0xff) <= 0x64)
-			break;
-
-		/*
-		 * Another rev is incremeting c0_count at a reduced clock
-		 * rate while in WAIT mode.  So we basically have the choice
-		 * between using the cp0 timer as clocksource or avoiding
-		 * the WAIT instruction.  Until more details are known,
-		 * disable the use of WAIT for 20Kc entirely.
-		   cpu_wait = r4k_wait;
-		 */
-		break;
-	case CPU_RM9000:
-		if ((c->processor_id & 0x00ff) >= 0x40)
-			cpu_wait = r4k_wait;
-		break;
-	default:
-		break;
-	}
-}
-
 static inline void check_errata(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 9098829..31fa856 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -122,7 +122,7 @@
 	__FINIT
 
 	.align	5	/* 32 byte rollback region */
-LEAF(r4k_wait)
+LEAF(__r4k_wait)
 	.set	push
 	.set	noreorder
 	/* start of rollback region */
@@ -146,14 +146,14 @@
 	jr	ra
 	nop
 	.set	pop
-	END(r4k_wait)
+	END(__r4k_wait)
 
 	.macro	BUILD_ROLLBACK_PROLOGUE handler
 	FEXPORT(rollback_\handler)
 	.set	push
 	.set	noat
 	MFC0	k0, CP0_EPC
-	PTR_LA	k1, r4k_wait
+	PTR_LA	k1, __r4k_wait
 	ori	k0, 0x1f	/* 32 byte rollback region */
 	xori	k0, 0x1f
 	bne	k0, k1, 9f
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
new file mode 100644
index 0000000..3b09b88
--- /dev/null
+++ b/arch/mips/kernel/idle.c
@@ -0,0 +1,244 @@
+/*
+ * MIPS idle loop and WAIT instruction support.
+ *
+ * Copyright (C) xxxx  the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
+ * Copyright (C) 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2001, 2004, 2011, 2012	 MIPS Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/printk.h>
+#include <linux/sched.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <asm/idle.h>
+#include <asm/mipsregs.h>
+
+/*
+ * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
+ * the implementation of the "wait" feature differs between CPU families. This
+ * points to the function that implements CPU specific wait.
+ * The wait instruction stops the pipeline and reduces the power consumption of
+ * the CPU very much.
+ */
+void (*cpu_wait)(void);
+EXPORT_SYMBOL(cpu_wait);
+
+static void r3081_wait(void)
+{
+	unsigned long cfg = read_c0_conf();
+	write_c0_conf(cfg | R30XX_CONF_HALT);
+	local_irq_enable();
+}
+
+static void r39xx_wait(void)
+{
+	if (!need_resched())
+		write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
+	local_irq_enable();
+}
+
+void r4k_wait(void)
+{
+	local_irq_enable();
+	__r4k_wait();
+}
+
+/*
+ * This variant is preferable as it allows testing need_resched and going to
+ * sleep depending on the outcome atomically.  Unfortunately the "It is
+ * implementation-dependent whether the pipeline restarts when a non-enabled
+ * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
+ * using this version a gamble.
+ */
+void r4k_wait_irqoff(void)
+{
+	if (!need_resched())
+		__asm__(
+		"	.set	push		\n"
+		"	.set	mips3		\n"
+		"	wait			\n"
+		"	.set	pop		\n");
+	local_irq_enable();
+	__asm__(
+	"	.globl __pastwait	\n"
+	"__pastwait:			\n");
+}
+
+/*
+ * The RM7000 variant has to handle erratum 38.	 The workaround is to not
+ * have any pending stores when the WAIT instruction is executed.
+ */
+static void rm7k_wait_irqoff(void)
+{
+	if (!need_resched())
+		__asm__(
+		"	.set	push					\n"
+		"	.set	mips3					\n"
+		"	.set	noat					\n"
+		"	mfc0	$1, $12					\n"
+		"	sync						\n"
+		"	mtc0	$1, $12		# stalls until W stage	\n"
+		"	wait						\n"
+		"	mtc0	$1, $12		# stalls until W stage	\n"
+		"	.set	pop					\n");
+	local_irq_enable();
+}
+
+/*
+ * The Au1xxx wait is available only if using 32khz counter or
+ * external timer source, but specifically not CP0 Counter.
+ * alchemy/common/time.c may override cpu_wait!
+ */
+static void au1k_wait(void)
+{
+	__asm__(
+	"	.set	mips3			\n"
+	"	cache	0x14, 0(%0)		\n"
+	"	cache	0x14, 32(%0)		\n"
+	"	sync				\n"
+	"	nop				\n"
+	"	wait				\n"
+	"	nop				\n"
+	"	nop				\n"
+	"	nop				\n"
+	"	nop				\n"
+	"	.set	mips0			\n"
+	: : "r" (au1k_wait));
+	local_irq_enable();
+}
+
+static int __initdata nowait;
+
+static int __init wait_disable(char *s)
+{
+	nowait = 1;
+
+	return 1;
+}
+
+__setup("nowait", wait_disable);
+
+void __init check_wait(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	if (nowait) {
+		printk("Wait instruction disabled.\n");
+		return;
+	}
+
+	switch (c->cputype) {
+	case CPU_R3081:
+	case CPU_R3081E:
+		cpu_wait = r3081_wait;
+		break;
+	case CPU_TX3927:
+		cpu_wait = r39xx_wait;
+		break;
+	case CPU_R4200:
+/*	case CPU_R4300: */
+	case CPU_R4600:
+	case CPU_R4640:
+	case CPU_R4650:
+	case CPU_R4700:
+	case CPU_R5000:
+	case CPU_R5500:
+	case CPU_NEVADA:
+	case CPU_4KC:
+	case CPU_4KEC:
+	case CPU_4KSC:
+	case CPU_5KC:
+	case CPU_25KF:
+	case CPU_PR4450:
+	case CPU_BMIPS3300:
+	case CPU_BMIPS4350:
+	case CPU_BMIPS4380:
+	case CPU_BMIPS5000:
+	case CPU_CAVIUM_OCTEON:
+	case CPU_CAVIUM_OCTEON_PLUS:
+	case CPU_CAVIUM_OCTEON2:
+	case CPU_JZRISC:
+	case CPU_LOONGSON1:
+	case CPU_XLR:
+	case CPU_XLP:
+		cpu_wait = r4k_wait;
+		break;
+
+	case CPU_RM7000:
+		cpu_wait = rm7k_wait_irqoff;
+		break;
+
+	case CPU_M14KC:
+	case CPU_M14KEC:
+	case CPU_24K:
+	case CPU_34K:
+	case CPU_1004K:
+		cpu_wait = r4k_wait;
+		if (read_c0_config7() & MIPS_CONF7_WII)
+			cpu_wait = r4k_wait_irqoff;
+		break;
+
+	case CPU_74K:
+		cpu_wait = r4k_wait;
+		if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
+			cpu_wait = r4k_wait_irqoff;
+		break;
+
+	case CPU_TX49XX:
+		cpu_wait = r4k_wait_irqoff;
+		break;
+	case CPU_ALCHEMY:
+		cpu_wait = au1k_wait;
+		break;
+	case CPU_20KC:
+		/*
+		 * WAIT on Rev1.0 has E1, E2, E3 and E16.
+		 * WAIT on Rev2.0 and Rev3.0 has E16.
+		 * Rev3.1 WAIT is nop, why bother
+		 */
+		if ((c->processor_id & 0xff) <= 0x64)
+			break;
+
+		/*
+		 * Another rev is incremeting c0_count at a reduced clock
+		 * rate while in WAIT mode.  So we basically have the choice
+		 * between using the cp0 timer as clocksource or avoiding
+		 * the WAIT instruction.  Until more details are known,
+		 * disable the use of WAIT for 20Kc entirely.
+		   cpu_wait = r4k_wait;
+		 */
+		break;
+	case CPU_RM9000:
+		if ((c->processor_id & 0x00ff) >= 0x40)
+			cpu_wait = r4k_wait;
+		break;
+	default:
+		break;
+	}
+}
+
+static void smtc_idle_hook(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	void smtc_idle_loop_hook(void);
+
+	smtc_idle_loop_hook();
+#endif
+}
+
+void arch_cpu_idle(void)
+{
+	smtc_idle_hook();
+	if (cpu_wait)
+		cpu_wait();
+	else
+		local_irq_enable();
+}
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
index 12bc4eb..1f8187a 100644
--- a/arch/mips/kernel/kprobes.c
+++ b/arch/mips/kernel/kprobes.c
@@ -207,7 +207,10 @@
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
 {
-	free_insn_slot(p->ainsn.insn, 0);
+	if (p->ainsn.insn) {
+		free_insn_slot(p->ainsn.insn, 0);
+		p->ainsn.insn = NULL;
+	}
 }
 
 static void save_previous_kprobe(struct kprobe_ctlblk *kcb)
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index a3e4614..acb3437 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -10,6 +10,7 @@
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
+#include <asm/idle.h>
 #include <asm/mipsregs.h>
 #include <asm/processor.h>
 #include <asm/prom.h>
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index a682a87..c6a041d 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -51,19 +51,6 @@
 }
 #endif
 
-void arch_cpu_idle(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
-	extern void smtc_idle_loop_hook(void);
-
-	smtc_idle_loop_hook();
-#endif
-	if (cpu_wait)
-		(*cpu_wait)();
-	else
-		local_irq_enable();
-}
-
 asmlinkage void ret_from_fork(void);
 asmlinkage void ret_from_kernel_thread(void);
 
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 36cfd40..97a5909 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -423,4 +423,5 @@
 	PTR	sys_process_vm_writev		/* 5305 */
 	PTR	sys_kcmp
 	PTR	sys_finit_module
+	PTR	sys_getdents64
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index c17619f..6e7862a 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -37,6 +37,7 @@
 #include <linux/atomic.h>
 #include <asm/cpu.h>
 #include <asm/processor.h>
+#include <asm/idle.h>
 #include <asm/r4k-timer.h>
 #include <asm/mmu_context.h>
 #include <asm/time.h>
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 7186222..75a4fd7 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -34,6 +34,7 @@
 #include <asm/hardirq.h>
 #include <asm/hazards.h>
 #include <asm/irq.h>
+#include <asm/idle.h>
 #include <asm/mmu_context.h>
 #include <asm/mipsregs.h>
 #include <asm/cacheflush.h>
@@ -858,7 +859,6 @@
 	unsigned long flags;
 	int mtflags;
 	unsigned long tcrestart;
-	extern void r4k_wait_irqoff(void), __pastwait(void);
 	int set_resched_flag = (type == LINUX_SMP_IPI &&
 				action == SMP_RESCHEDULE_YOURSELF);
 
@@ -914,8 +914,7 @@
 			 */
 			if (cpu_wait == r4k_wait_irqoff) {
 				tcrestart = read_tc_c0_tcrestart();
-				if (tcrestart >= (unsigned long)r4k_wait_irqoff
-				    && tcrestart < (unsigned long)__pastwait) {
+				if (address_is_in_r4k_wait_irqoff(tcrestart)) {
 					write_tc_c0_tcrestart(__pastwait);
 					tcstatus &= ~TCSTATUS_IXMT;
 					write_tc_c0_tcstatus(tcstatus);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index cb14db3..e3be670 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -41,6 +41,7 @@
 #include <asm/dsp.h>
 #include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
+#include <asm/idle.h>
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/module.h>
@@ -57,7 +58,6 @@
 #include <asm/uasm.h>
 
 extern void check_wait(void);
-extern asmlinkage void r4k_wait(void);
 extern asmlinkage void rollback_handle_int(void);
 extern asmlinkage void handle_int(void);
 extern u32 handle_tlbl[];
@@ -1542,7 +1542,7 @@
 		extern char except_vec_vi, except_vec_vi_lui;
 		extern char except_vec_vi_ori, except_vec_vi_end;
 		extern char rollback_except_vec_vi;
-		char *vec_start = (cpu_wait == r4k_wait) ?
+		char *vec_start = using_rollback_handler() ?
 			&rollback_except_vec_vi : &except_vec_vi;
 #ifdef CONFIG_MIPS_MT_SMTC
 		/*
@@ -1812,10 +1812,8 @@
 	extern char except_vec4;
 	extern char except_vec3_r4000;
 	unsigned long i;
-	int rollback;
 
 	check_wait();
-	rollback = (cpu_wait == r4k_wait);
 
 #if defined(CONFIG_KGDB)
 	if (kgdb_early_setup)
@@ -1892,7 +1890,8 @@
 	if (board_be_init)
 		board_be_init();
 
-	set_except_vector(0, rollback ? rollback_handle_int : handle_int);
+	set_except_vector(0, using_rollback_handler() ? rollback_handle_int
+						      : handle_int);
 	set_except_vector(1, handle_tlbm);
 	set_except_vector(2, handle_tlbl);
 	set_except_vector(3, handle_tlbs);
diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c
index e3f0d9b..c777dd3 100644
--- a/arch/mips/kvm/kvm_tlb.c
+++ b/arch/mips/kvm/kvm_tlb.c
@@ -17,6 +17,8 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/kvm_host.h>
+#include <linux/srcu.h>
+
 
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
@@ -169,21 +171,27 @@
 	}
 }
 
-static void kvm_mips_map_page(struct kvm *kvm, gfn_t gfn)
+static int kvm_mips_map_page(struct kvm *kvm, gfn_t gfn)
 {
+	int srcu_idx, err = 0;
 	pfn_t pfn;
 
 	if (kvm->arch.guest_pmap[gfn] != KVM_INVALID_PAGE)
-		return;
+		return 0;
 
+        srcu_idx = srcu_read_lock(&kvm->srcu);
 	pfn = kvm_mips_gfn_to_pfn(kvm, gfn);
 
 	if (kvm_mips_is_error_pfn(pfn)) {
-		panic("Couldn't get pfn for gfn %#" PRIx64 "!\n", gfn);
+		kvm_err("Couldn't get pfn for gfn %#" PRIx64 "!\n", gfn);
+		err = -EFAULT;
+		goto out;
 	}
 
 	kvm->arch.guest_pmap[gfn] = pfn;
-	return;
+out:
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
+	return err;
 }
 
 /* Translate guest KSEG0 addresses to Host PA */
@@ -207,7 +215,10 @@
 			gva);
 		return KVM_INVALID_PAGE;
 	}
-	kvm_mips_map_page(vcpu->kvm, gfn);
+
+	if (kvm_mips_map_page(vcpu->kvm, gfn) < 0)
+		return KVM_INVALID_ADDR;
+
 	return (kvm->arch.guest_pmap[gfn] << PAGE_SHIFT) + offset;
 }
 
@@ -310,8 +321,11 @@
 	even = !(gfn & 0x1);
 	vaddr = badvaddr & (PAGE_MASK << 1);
 
-	kvm_mips_map_page(vcpu->kvm, gfn);
-	kvm_mips_map_page(vcpu->kvm, gfn ^ 0x1);
+	if (kvm_mips_map_page(vcpu->kvm, gfn) < 0)
+		return -1;
+
+	if (kvm_mips_map_page(vcpu->kvm, gfn ^ 0x1) < 0)
+		return -1;
 
 	if (even) {
 		pfn0 = kvm->arch.guest_pmap[gfn];
@@ -389,8 +403,11 @@
 		pfn0 = 0;
 		pfn1 = 0;
 	} else {
-		kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT);
-		kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT);
+		if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT) < 0)
+			return -1;
+
+		if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT) < 0)
+			return -1;
 
 		pfn0 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT];
 		pfn1 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT];
diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c
index 35c8c64..65bfbb5 100644
--- a/arch/mips/loongson/common/reset.c
+++ b/arch/mips/loongson/common/reset.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/pm.h>
 
+#include <asm/idle.h>
 #include <asm/reboot.h>
 
 #include <loongson.h>
diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c
index d4f610f..547f34b 100644
--- a/arch/mips/loongson1/common/reset.c
+++ b/arch/mips/loongson1/common/reset.c
@@ -9,6 +9,7 @@
 
 #include <linux/io.h>
 #include <linux/pm.h>
+#include <asm/idle.h>
 #include <asm/reboot.h>
 
 #include <loongson1.h>
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index af31914..eaa99d2 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -37,6 +37,7 @@
 #include <linux/pm.h>
 #include <linux/bootmem.h>
 
+#include <asm/idle.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
 #include <asm/bootinfo.h>
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index e3e0941..89c8c10 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -36,6 +36,7 @@
 #include <linux/serial_8250.h>
 #include <linux/pm.h>
 
+#include <asm/idle.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
 #include <asm/bootinfo.h>
diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c
index 1651cfd..396b296 100644
--- a/arch/mips/pmcs-msp71xx/msp_setup.c
+++ b/arch/mips/pmcs-msp71xx/msp_setup.c
@@ -12,6 +12,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/cacheflush.h>
+#include <asm/idle.h>
 #include <asm/r4kcache.h>
 #include <asm/reboot.h>
 #include <asm/smp-ops.h>
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 5364aab..681e7f8 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <asm/bootinfo.h>
+#include <asm/idle.h>
 #include <asm/time.h>
 #include <asm/reboot.h>
 #include <asm/r4kcache.h>
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index 70a3f90..d7f7558 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -27,6 +27,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/cpu.h>
+#include <asm/idle.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/reboot.h>
diff --git a/arch/mips/wrppmc/reset.c b/arch/mips/wrppmc/reset.c
index cc5474b..80beb18 100644
--- a/arch/mips/wrppmc/reset.c
+++ b/arch/mips/wrppmc/reset.c
@@ -9,6 +9,7 @@
 #include <linux/kernel.h>
 
 #include <asm/cacheflush.h>
+#include <asm/idle.h>
 #include <asm/mipsregs.h>
 #include <asm/processor.h>
 
diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h
index 89fb400..0da8482 100644
--- a/arch/parisc/include/asm/assembly.h
+++ b/arch/parisc/include/asm/assembly.h
@@ -438,7 +438,6 @@
 	SAVE_SP  (%sr4, PT_SR4 (\regs))
 	SAVE_SP  (%sr5, PT_SR5 (\regs))
 	SAVE_SP  (%sr6, PT_SR6 (\regs))
-	SAVE_SP  (%sr7, PT_SR7 (\regs))
 
 	SAVE_CR  (%cr17, PT_IASQ0(\regs))
 	mtctl	 %r0,	%cr17
diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h
index c19f713..241c345 100644
--- a/arch/parisc/include/asm/hardirq.h
+++ b/arch/parisc/include/asm/hardirq.h
@@ -17,17 +17,14 @@
 
 typedef struct {
 	unsigned int __softirq_pending;
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
 	unsigned int kernel_stack_usage;
-#ifdef CONFIG_IRQSTACKS
 	unsigned int irq_stack_usage;
-	unsigned int irq_stack_counter;
-#endif
-#endif
 #ifdef CONFIG_SMP
 	unsigned int irq_resched_count;
 	unsigned int irq_call_count;
 #endif
+	unsigned int irq_unaligned_count;
+	unsigned int irq_fpassist_count;
 	unsigned int irq_tlb_count;
 } ____cacheline_aligned irq_cpustat_t;
 
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index cfbc439..cc2290a 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -17,7 +17,6 @@
 #include <asm/ptrace.h>
 #include <asm/types.h>
 #include <asm/percpu.h>
-
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -59,26 +58,6 @@
 #ifndef __ASSEMBLY__
 
 /*
- * IRQ STACK - used for irq handler
- */
-#ifdef __KERNEL__
-
-#include <linux/spinlock_types.h>
-
-#define IRQ_STACK_SIZE      (4096 << 2) /* 16k irq stack size */
-
-union irq_stack_union {
-	unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)];
-	raw_spinlock_t lock;
-};
-
-DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
-
-void call_on_stack(unsigned long p1, void *func, unsigned long new_stack);
-
-#endif /* __KERNEL__ */
-
-/*
  * Data detected about CPUs at boot time which is the same for all CPU's.
  * HP boxes are SMP - ie identical processors.
  *
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index ae27cb6..e8f07dd 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -65,15 +65,11 @@
 	rsm	PSW_SM_I, %r0	/* barrier for "Relied upon Translation */
 	mtsp	%r0, %sr4
 	mtsp	%r0, %sr5
-	mfsp	%sr7, %r1
-	or,=    %r0,%r1,%r0	/* Only save sr7 in sr3 if sr7 != 0 */
-	mtsp	%r1, %sr3
+	mtsp	%r0, %sr6
 	tovirt_r1 %r29
 	load32	KERNEL_PSW, %r1
 
 	rsm     PSW_SM_QUIET,%r0	/* second "heavy weight" ctl op */
-	mtsp	%r0, %sr6
-	mtsp	%r0, %sr7
 	mtctl	%r0, %cr17	/* Clear IIASQ tail */
 	mtctl	%r0, %cr17	/* Clear IIASQ head */
 	mtctl	%r1, %ipsw
@@ -119,17 +115,20 @@
 
 	/* we save the registers in the task struct */
 
+	copy	%r30, %r17
 	mfctl   %cr30, %r1
+	ldo	THREAD_SZ_ALGN(%r1), %r30
+	mtsp	%r0,%sr7
+	mtsp	%r16,%sr3
 	tophys  %r1,%r9
 	LDREG	TI_TASK(%r9), %r1	/* thread_info -> task_struct */
 	tophys  %r1,%r9
 	ldo     TASK_REGS(%r9),%r9
-	STREG   %r30, PT_GR30(%r9)
+	STREG   %r17,PT_GR30(%r9)
 	STREG   %r29,PT_GR29(%r9)
 	STREG   %r26,PT_GR26(%r9)
+	STREG	%r16,PT_SR7(%r9)
 	copy    %r9,%r29
-	mfctl   %cr30, %r1
-	ldo	THREAD_SZ_ALGN(%r1), %r30
 	.endm
 
 	.macro  get_stack_use_r30
@@ -137,10 +136,12 @@
 	/* we put a struct pt_regs on the stack and save the registers there */
 
 	tophys  %r30,%r9
-	STREG   %r30,PT_GR30(%r9)
+	copy	%r30,%r1
 	ldo	PT_SZ_ALGN(%r30),%r30
+	STREG   %r1,PT_GR30(%r9)
 	STREG   %r29,PT_GR29(%r9)
 	STREG   %r26,PT_GR26(%r9)
+	STREG	%r16,PT_SR7(%r9)
 	copy    %r9,%r29
 	.endm
 
diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c
index f7752f6..9e2d2e4 100644
--- a/arch/parisc/kernel/hardware.c
+++ b/arch/parisc/kernel/hardware.c
@@ -222,6 +222,7 @@
 	{HPHW_NPROC,0x5DD,0x4,0x81,"Duet W2"},
 	{HPHW_NPROC,0x5DE,0x4,0x81,"Piccolo W+"},
 	{HPHW_NPROC,0x5DF,0x4,0x81,"Cantata W2"},
+	{HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+? (rp5470)"},
 	{HPHW_NPROC,0x5E0,0x4,0x91,"Cantata DC- W2"},
 	{HPHW_NPROC,0x5E1,0x4,0x91,"Crescendo DC- W2"},
 	{HPHW_NPROC,0x5E2,0x4,0x91,"Crescendo 650 W2"},
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 55237a7..2e6443b 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -27,11 +27,11 @@
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
-#include <linux/spinlock.h>
 #include <linux/types.h>
 #include <asm/io.h>
 
 #include <asm/smp.h>
+#include <asm/ldcw.h>
 
 #undef PARISC_IRQ_CR16_COUNTS
 
@@ -172,10 +172,6 @@
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_stack_usage);
 	seq_puts(p, "  Interrupt stack usage\n");
-	seq_printf(p, "%*s: ", prec, "ISC");
-	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", irq_stats(j)->irq_stack_counter);
-	seq_puts(p, "  Interrupt stack usage counter\n");
 # endif
 #endif
 #ifdef CONFIG_SMP
@@ -188,6 +184,14 @@
 		seq_printf(p, "%10u ", irq_stats(j)->irq_call_count);
 	seq_puts(p, "  Function call interrupts\n");
 #endif
+	seq_printf(p, "%*s: ", prec, "UAH");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->irq_unaligned_count);
+	seq_puts(p, "  Unaligned access handler traps\n");
+	seq_printf(p, "%*s: ", prec, "FPA");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->irq_fpassist_count);
+	seq_puts(p, "  Floating point assist traps\n");
 	seq_printf(p, "%*s: ", prec, "TLB");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count);
@@ -376,6 +380,24 @@
 	return (BITS_PER_LONG - bit) + TIMER_IRQ;
 }
 
+#ifdef CONFIG_IRQSTACKS
+/*
+ * IRQ STACK - used for irq handler
+ */
+#define IRQ_STACK_SIZE      (4096 << 2) /* 16k irq stack size */
+
+union irq_stack_union {
+	unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)];
+	volatile unsigned int slock[4];
+	volatile unsigned int lock[1];
+};
+
+DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = {
+		.slock = { 1,1,1,1 },
+	};
+#endif
+
+
 int sysctl_panic_on_stackoverflow = 1;
 
 static inline void stack_overflow_check(struct pt_regs *regs)
@@ -442,27 +464,26 @@
 }
 
 #ifdef CONFIG_IRQSTACKS
-DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = {
-		.lock = __RAW_SPIN_LOCK_UNLOCKED((irq_stack_union).lock)
-	};
+/* in entry.S: */
+void call_on_stack(unsigned long p1, void *func, unsigned long new_stack);
 
 static void execute_on_irq_stack(void *func, unsigned long param1)
 {
 	union irq_stack_union *union_ptr;
 	unsigned long irq_stack;
-	raw_spinlock_t *irq_stack_in_use;
+	volatile unsigned int *irq_stack_in_use;
 
 	union_ptr = &per_cpu(irq_stack_union, smp_processor_id());
 	irq_stack = (unsigned long) &union_ptr->stack;
-	irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.lock),
+	irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.slock),
 			 64); /* align for stack frame usage */
 
 	/* We may be called recursive. If we are already using the irq stack,
 	 * just continue to use it. Use spinlocks to serialize
 	 * the irq stack usage.
 	 */
-	irq_stack_in_use = &union_ptr->lock;
-	if (!raw_spin_trylock(irq_stack_in_use)) {
+	irq_stack_in_use = (volatile unsigned int *)__ldcw_align(union_ptr);
+	if (!__ldcw(irq_stack_in_use)) {
 		void (*direct_call)(unsigned long p1) = func;
 
 		/* We are using the IRQ stack already.
@@ -474,10 +495,8 @@
 	/* This is where we switch to the IRQ stack. */
 	call_on_stack(param1, func, irq_stack);
 
-	__inc_irq_stat(irq_stack_counter);
-
 	/* free up irq stack usage. */
-	do_raw_spin_unlock(irq_stack_in_use);
+	*irq_stack_in_use = 1;
 }
 
 asmlinkage void do_softirq(void)
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 5e1de60..36d7f40 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -605,14 +605,14 @@
 	convert_phys_for_tlb_insert20 %r26	/* convert phys addr to tlb insert format */
 	convert_phys_for_tlb_insert20 %r23	/* convert phys addr to tlb insert format */
 	depd		%r24,63,22, %r28	/* Form aliased virtual address 'to' */
-	depdi		0, 63,PAGE_SHIFT, %r28  /* Clear any offset bits */
+	depdi		0, 63,PAGE_SHIFT, %r28	/* Clear any offset bits */
 	copy		%r28, %r29
 	depdi		1, 41,1, %r29		/* Form aliased virtual address 'from' */
 #else
 	extrw,u		%r26, 24,25, %r26	/* convert phys addr to tlb insert format */
 	extrw,u		%r23, 24,25, %r23	/* convert phys addr to tlb insert format */
 	depw		%r24, 31,22, %r28	/* Form aliased virtual address 'to' */
-	depwi		0, 31,12, %r28		/* Clear any offset bits */
+	depwi		0, 31,PAGE_SHIFT, %r28	/* Clear any offset bits */
 	copy		%r28, %r29
 	depwi		1, 9,1, %r29		/* Form aliased virtual address 'from' */
 #endif
@@ -762,7 +762,7 @@
 #else
 	extrw,u		%r26, 24,25, %r26	/* convert phys addr to tlb insert format */
 	depw		%r25, 31,22, %r28	/* Form aliased virtual address 'to' */
-	depwi		0, 31,12, %r28		/* Clear any offset bits */
+	depwi		0, 31,PAGE_SHIFT, %r28	/* Clear any offset bits */
 #endif
 
 	/* Purge any old translation */
@@ -846,7 +846,7 @@
 #else
 	extrw,u		%r26, 24,25, %r26	/* convert phys addr to tlb insert format */
 	depw		%r25, 31,22, %r28	/* Form aliased virtual address 'to' */
-	depwi		0, 31,12, %r28		/* Clear any offset bits */
+	depwi		0, 31,PAGE_SHIFT, %r28	/* Clear any offset bits */
 #endif
 
 	/* Purge any old translation */
@@ -918,11 +918,11 @@
 #endif
 	convert_phys_for_tlb_insert20 %r26	/* convert phys addr to tlb insert format */
 	depd		%r25, 63,22, %r28	/* Form aliased virtual address 'to' */
-	depdi		0, 63,PAGE_SHIFT, %r28  /* Clear any offset bits */
+	depdi		0, 63,PAGE_SHIFT, %r28	/* Clear any offset bits */
 #else
 	extrw,u		%r26, 24,25, %r26	/* convert phys addr to tlb insert format */
 	depw		%r25, 31,22, %r28	/* Form aliased virtual address 'to' */
-	depwi		0, 31,12, %r28		/* Clear any offset bits */
+	depwi		0, 31,PAGE_SHIFT, %r28	/* Clear any offset bits */
 #endif
 
 	/* Purge any old translation */
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index fe41a98..04e47c6 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -646,6 +646,7 @@
 	case 14:
 		/* Assist Exception Trap, i.e. floating point exception. */
 		die_if_kernel("Floating point exception", regs, 0); /* quiet */
+		__inc_irq_stat(irq_fpassist_count);
 		handle_fpe(regs);
 		return;
 
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index 234e368..d7c0acb 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -27,6 +27,7 @@
 #include <linux/signal.h>
 #include <linux/ratelimit.h>
 #include <asm/uaccess.h>
+#include <asm/hardirq.h>
 
 /* #define DEBUG_UNALIGNED 1 */
 
@@ -454,6 +455,8 @@
 	struct siginfo si;
 	register int flop=0;	/* true if this is a flop */
 
+	__inc_irq_stat(irq_unaligned_count);
+
 	/* log a message with pacing */
 	if (user_mode(regs)) {
 		if (current->thread.flags & PARISC_UAC_SIGBUS) {
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index f791962..139a830 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -136,7 +136,6 @@
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=m
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=m
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 8b11b5b..2c1d8cb 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -174,6 +174,8 @@
 /* Get the pointer to a device_node's pci_dn */
 #define PCI_DN(dn)	((struct pci_dn *) (dn)->data)
 
+extern struct pci_dn *pci_get_pdn(struct pci_dev *pdev);
+
 extern void * update_dn_pci_info(struct device_node *dn, void *data);
 
 static inline int pci_device_from_OF_node(struct device_node *np,
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index d7e67ca..594db6b 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -284,6 +284,12 @@
 	unsigned long	ebbrr;
 	unsigned long	ebbhr;
 	unsigned long	bescr;
+	unsigned long	siar;
+	unsigned long	sdar;
+	unsigned long	sier;
+	unsigned long	mmcr0;
+	unsigned long	mmcr2;
+	unsigned long	mmcra;
 #endif
 };
 
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index b51a97c..6f16ffa 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -127,6 +127,12 @@
 	DEFINE(THREAD_BESCR, offsetof(struct thread_struct, bescr));
 	DEFINE(THREAD_EBBHR, offsetof(struct thread_struct, ebbhr));
 	DEFINE(THREAD_EBBRR, offsetof(struct thread_struct, ebbrr));
+	DEFINE(THREAD_SIAR, offsetof(struct thread_struct, siar));
+	DEFINE(THREAD_SDAR, offsetof(struct thread_struct, sdar));
+	DEFINE(THREAD_SIER, offsetof(struct thread_struct, sier));
+	DEFINE(THREAD_MMCR0, offsetof(struct thread_struct, mmcr0));
+	DEFINE(THREAD_MMCR2, offsetof(struct thread_struct, mmcr2));
+	DEFINE(THREAD_MMCRA, offsetof(struct thread_struct, mmcra));
 #endif
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 	DEFINE(PACATMSCRATCH, offsetof(struct paca_struct, tm_scratch));
diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
index a283b64..18b5b9c 100644
--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -135,8 +135,12 @@
 	blr
 
 __init_TLB:
-	/* Clear the TLB */
-	li	r6,128
+	/*
+	 * Clear the TLB using the "IS 3" form of tlbiel instruction
+	 * (invalidate by congruence class). P7 has 128 CCs, P8 has 512
+	 * so we just always do 512
+	 */
+	li	r6,512
 	mtctr	r6
 	li	r7,0xc00	/* IS field = 0b11 */
 	ptesync
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 51cfb8f..0e9095e 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -465,6 +465,20 @@
 	std	r0, THREAD_EBBHR(r3)
 	mfspr	r0, SPRN_EBBRR
 	std	r0, THREAD_EBBRR(r3)
+
+	/* PMU registers made user read/(write) by EBB */
+	mfspr	r0, SPRN_SIAR
+	std	r0, THREAD_SIAR(r3)
+	mfspr	r0, SPRN_SDAR
+	std	r0, THREAD_SDAR(r3)
+	mfspr	r0, SPRN_SIER
+	std	r0, THREAD_SIER(r3)
+	mfspr	r0, SPRN_MMCR0
+	std	r0, THREAD_MMCR0(r3)
+	mfspr	r0, SPRN_MMCR2
+	std	r0, THREAD_MMCR2(r3)
+	mfspr	r0, SPRN_MMCRA
+	std	r0, THREAD_MMCRA(r3)
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 #endif
 
@@ -560,6 +574,20 @@
 	ld	r0, THREAD_EBBRR(r4)
 	mtspr	SPRN_EBBRR, r0
 
+	/* PMU registers made user read/(write) by EBB */
+	ld	r0, THREAD_SIAR(r4)
+	mtspr	SPRN_SIAR, r0
+	ld	r0, THREAD_SDAR(r4)
+	mtspr	SPRN_SDAR, r0
+	ld	r0, THREAD_SIER(r4)
+	mtspr	SPRN_SIER, r0
+	ld	r0, THREAD_MMCR0(r4)
+	mtspr	SPRN_MMCR0, r0
+	ld	r0, THREAD_MMCR2(r4)
+	mtspr	SPRN_MMCR2, r0
+	ld	r0, THREAD_MMCRA(r4)
+	mtspr	SPRN_MMCRA, r0
+
 	ld	r0,THREAD_TAR(r4)
 	mtspr	SPRN_TAR,r0
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 6053f03..e9acf50 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1520,9 +1520,10 @@
 	for (i = 0; i < 3; ++i) {
 		res = &hose->mem_resources[i];
 		if (!res->flags) {
-			printk(KERN_ERR "PCI: Memory resource 0 not set for "
-			       "host bridge %s (domain %d)\n",
-			       hose->dn->full_name, hose->global_number);
+			if (i == 0)
+				printk(KERN_ERR "PCI: Memory resource 0 not set for "
+				       "host bridge %s (domain %d)\n",
+				       hose->dn->full_name, hose->global_number);
 			continue;
 		}
 		offset = hose->mem_offset[i];
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 873050d..2e86296 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -266,3 +266,13 @@
 }
 EXPORT_SYMBOL(pcibus_to_node);
 #endif
+
+static void quirk_radeon_32bit_msi(struct pci_dev *dev)
+{
+	struct pci_dn *pdn = pci_get_pdn(dev);
+
+	if (pdn)
+		pdn->force_32bit_msi = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon_32bit_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon_32bit_msi);
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index e7af165..df03844 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -32,6 +32,14 @@
 #include <asm/ppc-pci.h>
 #include <asm/firmware.h>
 
+struct pci_dn *pci_get_pdn(struct pci_dev *pdev)
+{
+	struct device_node *dn = pci_device_to_OF_node(pdev);
+	if (!dn)
+		return NULL;
+	return PCI_DN(dn);
+}
+
 /*
  * Traverse_func that inits the PCI fields of the device node.
  * NOTE: this *must* be done before read/write config to the device.
diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index d3e840d..c24684c 100644
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -6,6 +6,7 @@
 	select PPC_ICP_NATIVE
 	select PPC_P7_NAP
 	select PPC_PCI_CHOICE if EMBEDDED
+	select EPAPR_BOOT
 	default y
 
 config POWERNV_MSI
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 3937aaa..9c9d15e 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -68,16 +68,6 @@
 define_pe_printk_level(pe_warn, KERN_WARNING);
 define_pe_printk_level(pe_info, KERN_INFO);
 
-static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev)
-{
-	struct device_node *np;
-
-	np = pci_device_to_OF_node(dev);
-	if (!np)
-		return NULL;
-	return PCI_DN(np);
-}
-
 static int pnv_ioda_alloc_pe(struct pnv_phb *phb)
 {
 	unsigned long pe;
@@ -110,7 +100,7 @@
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
 	struct pnv_phb *phb = hose->private_data;
-	struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+	struct pci_dn *pdn = pci_get_pdn(dev);
 
 	if (!pdn)
 		return NULL;
@@ -173,7 +163,7 @@
 
 	/* Add to all parents PELT-V */
 	while (parent) {
-		struct pci_dn *pdn = pnv_ioda_get_pdn(parent);
+		struct pci_dn *pdn = pci_get_pdn(parent);
 		if (pdn && pdn->pe_number != IODA_INVALID_PE) {
 			rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
 						pe->pe_number, OPAL_ADD_PE_TO_DOMAIN);
@@ -252,7 +242,7 @@
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
 	struct pnv_phb *phb = hose->private_data;
-	struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+	struct pci_dn *pdn = pci_get_pdn(dev);
 	struct pnv_ioda_pe *pe;
 	int pe_num;
 
@@ -323,7 +313,7 @@
 	struct pci_dev *dev;
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
-		struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+		struct pci_dn *pdn = pci_get_pdn(dev);
 
 		if (pdn == NULL) {
 			pr_warn("%s: No device node associated with device !\n",
@@ -436,7 +426,7 @@
 
 static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev)
 {
-	struct pci_dn *pdn = pnv_ioda_get_pdn(pdev);
+	struct pci_dn *pdn = pci_get_pdn(pdev);
 	struct pnv_ioda_pe *pe;
 
 	/*
@@ -768,6 +758,7 @@
 				  unsigned int is_64, struct msi_msg *msg)
 {
 	struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
+	struct pci_dn *pdn = pci_get_pdn(dev);
 	struct irq_data *idata;
 	struct irq_chip *ichip;
 	unsigned int xive_num = hwirq - phb->msi_base;
@@ -783,6 +774,10 @@
 	if (pe->mve_number < 0)
 		return -ENXIO;
 
+	/* Force 32-bit MSI on some broken devices */
+	if (pdn && pdn->force_32bit_msi)
+		is_64 = 0;
+
 	/* Assign XIVE to PE */
 	rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num);
 	if (rc) {
@@ -1035,7 +1030,7 @@
 	if (!phb->initialized)
 		return 0;
 
-	pdn = pnv_ioda_get_pdn(dev);
+	pdn = pci_get_pdn(dev);
 	if (!pdn || pdn->pe_number == IODA_INVALID_PE)
 		return -EINVAL;
 
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 163bd74..277343c 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -47,6 +47,10 @@
 {
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
 	struct pnv_phb *phb = hose->private_data;
+	struct pci_dn *pdn = pci_get_pdn(pdev);
+
+	if (pdn && pdn->force_32bit_msi && !phb->msi32_support)
+		return -ENODEV;
 
 	return (phb && phb->msi_bmp.bitmap) ? 0 : -ENODEV;
 }
@@ -367,7 +371,7 @@
 	while (npages--)
 		*(tcep++) = 0;
 
-	if (tbl->it_type & TCE_PCI_SWINV_CREATE)
+	if (tbl->it_type & TCE_PCI_SWINV_FREE)
 		pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1);
 }
 
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 420524e..6d2f0ab 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -26,26 +26,6 @@
 #define RTAS_CHANGE_MSIX_FN	4
 #define RTAS_CHANGE_32MSI_FN	5
 
-static struct pci_dn *get_pdn(struct pci_dev *pdev)
-{
-	struct device_node *dn;
-	struct pci_dn *pdn;
-
-	dn = pci_device_to_OF_node(pdev);
-	if (!dn) {
-		dev_dbg(&pdev->dev, "rtas_msi: No OF device node\n");
-		return NULL;
-	}
-
-	pdn = PCI_DN(dn);
-	if (!pdn) {
-		dev_dbg(&pdev->dev, "rtas_msi: No PCI DN\n");
-		return NULL;
-	}
-
-	return pdn;
-}
-
 /* RTAS Helpers */
 
 static int rtas_change_msi(struct pci_dn *pdn, u32 func, u32 num_irqs)
@@ -91,7 +71,7 @@
 {
 	struct pci_dn *pdn;
 
-	pdn = get_pdn(pdev);
+	pdn = pci_get_pdn(pdev);
 	if (!pdn)
 		return;
 
@@ -152,7 +132,7 @@
 	struct pci_dn *pdn;
 	const u32 *req_msi;
 
-	pdn = get_pdn(pdev);
+	pdn = pci_get_pdn(pdev);
 	if (!pdn)
 		return -ENODEV;
 
@@ -394,6 +374,23 @@
 	return 0;
 }
 
+static void rtas_hack_32bit_msi_gen2(struct pci_dev *pdev)
+{
+	u32 addr_hi, addr_lo;
+
+	/*
+	 * We should only get in here for IODA1 configs. This is based on the
+	 * fact that we using RTAS for MSIs, we don't have the 32 bit MSI RTAS
+	 * support, and we are in a PCIe Gen2 slot.
+	 */
+	dev_info(&pdev->dev,
+		 "rtas_msi: No 32 bit MSI firmware support, forcing 32 bit MSI\n");
+	pci_read_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, &addr_hi);
+	addr_lo = 0xffff0000 | ((addr_hi >> (48 - 32)) << 4);
+	pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO, addr_lo);
+	pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, 0);
+}
+
 static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type)
 {
 	struct pci_dn *pdn;
@@ -401,8 +398,9 @@
 	struct msi_desc *entry;
 	struct msi_msg msg;
 	int nvec = nvec_in;
+	int use_32bit_msi_hack = 0;
 
-	pdn = get_pdn(pdev);
+	pdn = pci_get_pdn(pdev);
 	if (!pdn)
 		return -ENODEV;
 
@@ -428,15 +426,31 @@
 	 */
 again:
 	if (type == PCI_CAP_ID_MSI) {
-		if (pdn->force_32bit_msi)
+		if (pdn->force_32bit_msi) {
 			rc = rtas_change_msi(pdn, RTAS_CHANGE_32MSI_FN, nvec);
-		else
+			if (rc < 0) {
+				/*
+				 * We only want to run the 32 bit MSI hack below if
+				 * the max bus speed is Gen2 speed
+				 */
+				if (pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT)
+					return rc;
+
+				use_32bit_msi_hack = 1;
+			}
+		} else
+			rc = -1;
+
+		if (rc < 0)
 			rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec);
 
-		if (rc < 0 && !pdn->force_32bit_msi) {
+		if (rc < 0) {
 			pr_debug("rtas_msi: trying the old firmware call.\n");
 			rc = rtas_change_msi(pdn, RTAS_CHANGE_FN, nvec);
 		}
+
+		if (use_32bit_msi_hack && rc > 0)
+			rtas_hack_32bit_msi_gen2(pdev);
 	} else
 		rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec);
 
@@ -518,12 +532,3 @@
 }
 arch_initcall(rtas_msi_init);
 
-static void quirk_radeon(struct pci_dev *dev)
-{
-	struct pci_dn *pdn = get_pdn(dev);
-
-	if (pdn)
-		pdn->force_32bit_msi = 1;
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2c9789d..da183c5 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -98,7 +98,6 @@
 	select CLONE_BACKWARDS2
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CPU_DEVICES if !SMP
-	select GENERIC_KERNEL_THREAD
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL_OLD
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h
index b7931fa..bf246da 100644
--- a/arch/s390/include/asm/ftrace.h
+++ b/arch/s390/include/asm/ftrace.h
@@ -9,11 +9,6 @@
 
 #define MCOUNT_ADDR ((long)_mcount)
 
-#ifdef CONFIG_64BIT
-#define MCOUNT_INSN_SIZE  12
-#else
-#define MCOUNT_INSN_SIZE  20
-#endif
 
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
 {
@@ -21,4 +16,11 @@
 }
 
 #endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_64BIT
+#define MCOUNT_INSN_SIZE  12
+#else
+#define MCOUNT_INSN_SIZE  22
+#endif
+
 #endif /* _ASM_S390_FTRACE_H */
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 75ce9b0..5d64fb7 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -32,7 +32,7 @@
 
 void storage_key_init_range(unsigned long start, unsigned long end);
 
-static unsigned long pfmf(unsigned long function, unsigned long address)
+static inline unsigned long pfmf(unsigned long function, unsigned long address)
 {
 	asm volatile(
 		"	.insn	rre,0xb9af0000,%[function],%[address]"
@@ -44,17 +44,13 @@
 
 static inline void clear_page(void *page)
 {
-	if (MACHINE_HAS_PFMF) {
-		pfmf(0x10000, (unsigned long)page);
-	} else {
-		register unsigned long reg1 asm ("1") = 0;
-		register void *reg2 asm ("2") = page;
-		register unsigned long reg3 asm ("3") = 4096;
-		asm volatile(
-			"	mvcl	2,0"
-			: "+d" (reg2), "+d" (reg3) : "d" (reg1)
-			: "memory", "cc");
-	}
+	register unsigned long reg1 asm ("1") = 0;
+	register void *reg2 asm ("2") = page;
+	register unsigned long reg3 asm ("3") = 4096;
+	asm volatile(
+		"	mvcl	2,0"
+		: "+d" (reg2), "+d" (reg3) : "d" (reg1)
+		: "memory", "cc");
 }
 
 static inline void copy_page(void *to, void *from)
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 4105b82..0f0de30 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -306,7 +306,7 @@
 #define RCP_HC_BIT	0x00200000UL
 #define RCP_GR_BIT	0x00040000UL
 #define RCP_GC_BIT	0x00020000UL
-#define RCP_IN_BIT	0x00008000UL	/* IPTE notify bit */
+#define RCP_IN_BIT	0x00002000UL	/* IPTE notify bit */
 
 /* User dirty / referenced bit for KVM's migration feature */
 #define KVM_UR_BIT	0x00008000UL
@@ -374,7 +374,7 @@
 #define RCP_HC_BIT	0x0020000000000000UL
 #define RCP_GR_BIT	0x0004000000000000UL
 #define RCP_GC_BIT	0x0002000000000000UL
-#define RCP_IN_BIT	0x0000800000000000UL	/* IPTE notify bit */
+#define RCP_IN_BIT	0x0000200000000000UL	/* IPTE notify bit */
 
 /* User dirty / referenced bit for KVM's migration feature */
 #define KVM_UR_BIT	0x0000800000000000UL
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index 7f4a4a8..be87d3e 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -1862,6 +1862,8 @@
 	while (len) {
 		ptr = buffer;
 		opsize = insn_length(*code);
+		if (opsize > len)
+			break;
 		ptr += sprintf(ptr, "%p: ", code);
 		for (i = 0; i < opsize; i++)
 			ptr += sprintf(ptr, "%02x", code[i]);
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 78bdf0e..e3043ae 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -16,12 +16,6 @@
 #include <trace/syscall.h>
 #include <asm/asm-offsets.h>
 
-#ifdef CONFIG_64BIT
-#define MCOUNT_OFFSET_RET 12
-#else
-#define MCOUNT_OFFSET_RET 22
-#endif
-
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 void ftrace_disable_code(void);
@@ -155,9 +149,10 @@
 
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		goto out;
+	ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE;
 	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
 		goto out;
-	trace.func = (ip & PSW_ADDR_INSN) - MCOUNT_OFFSET_RET;
+	trace.func = ip;
 	/* Only trace if the calling function expects to. */
 	if (!ftrace_graph_entry(&trace)) {
 		current->curr_ret_stack--;
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index 4567ce2..08dcf21 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -7,6 +7,7 @@
 
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
+#include <asm/ftrace.h>
 
 	.section .kprobes.text, "ax"
 
@@ -33,6 +34,7 @@
 	la	%r2,0(%r14)
 	st	%r0,__SF_BACKCHAIN(%r15)
 	la	%r3,0(%r3)
+	ahi	%r2,-MCOUNT_INSN_SIZE
 	l	%r14,0b-0b(%r1)
 	l	%r14,0(%r14)
 	basr	%r14,%r14
diff --git a/arch/s390/kernel/mcount64.S b/arch/s390/kernel/mcount64.S
index 1133219..1c52eae 100644
--- a/arch/s390/kernel/mcount64.S
+++ b/arch/s390/kernel/mcount64.S
@@ -7,6 +7,7 @@
 
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
+#include <asm/ftrace.h>
 
 	.section .kprobes.text, "ax"
 
@@ -29,6 +30,7 @@
 	stg	%r1,__SF_BACKCHAIN(%r15)
 	lgr	%r2,%r14
 	lg	%r3,168(%r15)
+	aghi	%r2,-MCOUNT_INSN_SIZE
 	larl	%r14,ftrace_trace_function
 	lg	%r14,0(%r14)
 	basr	%r14,%r14
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 8074cb4..05674b6 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -645,7 +645,7 @@
 			continue;
 		pcpu = pcpu_devices + cpu;
 		pcpu->address = info->cpu[i].address;
-		pcpu->state = (cpu >= info->configured) ?
+		pcpu->state = (i >= info->configured) ?
 			CPU_STATE_STANDBY : CPU_STATE_CONFIGURED;
 		smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN);
 		set_cpu_present(cpu, true);
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 7805ddc..18dc417 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -677,8 +677,7 @@
 			break;
 		}
 		/* Get the page mapped */
-		if (get_user_pages(current, gmap->mm, addr, 1, 1, 0,
-				   NULL, NULL) != 1) {
+		if (fixup_user_fault(current, gmap->mm, addr, FAULT_FLAG_WRITE)) {
 			rc = -EFAULT;
 			break;
 		}
diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c
index d8f988a..0940682 100644
--- a/arch/score/mm/init.c
+++ b/arch/score/mm/init.c
@@ -41,8 +41,6 @@
 unsigned long empty_zero_page;
 EXPORT_SYMBOL_GPL(empty_zero_page);
 
-static struct kcore_list kcore_mem, kcore_vmalloc;
-
 static void setup_zero_page(void)
 {
 	struct page *page;
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
index 0e0fabf..6eb18c4 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/mrst.c
@@ -141,11 +141,6 @@
  */
 static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
 {
-	if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
-				|| devfn == PCI_DEVFN(0, 0)
-				|| devfn == PCI_DEVFN(3, 0)))
-		return 1;
-
 	/* This is a workaround for A0 LNC bug where PCI status register does
 	 * not have new CAP bit set. can not be written by SW either.
 	 *
@@ -155,7 +150,10 @@
 	 */
 	if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
 		return 0;
-
+	if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
+				|| devfn == PCI_DEVFN(0, 0)
+				|| devfn == PCI_DEVFN(3, 0)))
+		return 1;
 	return 0; /* langwell on others */
 }
 
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index ecb743b..536562c 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -24,7 +24,7 @@
 # Power management related files
 acpi-y				+= wakeup.o
 acpi-y				+= sleep.o
-acpi-$(CONFIG_PM)		+= device_pm.o
+acpi-y				+= device_pm.o
 acpi-$(CONFIG_ACPI_SLEEP)	+= proc.o
 
 
@@ -38,7 +38,6 @@
 acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-y				+= pci_root.o pci_link.o pci_irq.o
-acpi-y				+= csrt.o
 acpi-$(CONFIG_X86_INTEL_LPSS)	+= acpi_lpss.o
 acpi-y				+= acpi_platform.o
 acpi-y				+= power.o
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index b1c9542..652fd5c 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -35,11 +35,16 @@
 
 struct lpss_device_desc {
 	bool clk_required;
-	const char *clk_parent;
+	const char *clkdev_name;
 	bool ltr_required;
 	unsigned int prv_offset;
 };
 
+static struct lpss_device_desc lpss_dma_desc = {
+	.clk_required = true,
+	.clkdev_name = "hclk",
+};
+
 struct lpss_private_data {
 	void __iomem *mmio_base;
 	resource_size_t mmio_size;
@@ -49,7 +54,6 @@
 
 static struct lpss_device_desc lpt_dev_desc = {
 	.clk_required = true,
-	.clk_parent = "lpss_clk",
 	.prv_offset = 0x800,
 	.ltr_required = true,
 };
@@ -60,6 +64,9 @@
 };
 
 static const struct acpi_device_id acpi_lpss_device_ids[] = {
+	/* Generic LPSS devices */
+	{ "INTL9C60", (unsigned long)&lpss_dma_desc },
+
 	/* Lynxpoint LPSS devices */
 	{ "INT33C0", (unsigned long)&lpt_dev_desc },
 	{ "INT33C1", (unsigned long)&lpt_dev_desc },
@@ -91,16 +98,27 @@
 				 struct lpss_private_data *pdata)
 {
 	const struct lpss_device_desc *dev_desc = pdata->dev_desc;
+	struct lpss_clk_data *clk_data;
 
 	if (!lpss_clk_dev)
 		lpt_register_clock_device();
 
-	if (!dev_desc->clk_parent || !pdata->mmio_base
+	clk_data = platform_get_drvdata(lpss_clk_dev);
+	if (!clk_data)
+		return -ENODEV;
+
+	if (dev_desc->clkdev_name) {
+		clk_register_clkdev(clk_data->clk, dev_desc->clkdev_name,
+				    dev_name(&adev->dev));
+		return 0;
+	}
+
+	if (!pdata->mmio_base
 	    || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
 		return -ENODATA;
 
 	pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev),
-				       dev_desc->clk_parent, 0,
+				       clk_data->name, 0,
 				       pdata->mmio_base + dev_desc->prv_offset,
 				       0, 0, NULL);
 	if (IS_ERR(pdata->clk))
diff --git a/drivers/acpi/csrt.c b/drivers/acpi/csrt.c
deleted file mode 100644
index 5c15a91..0000000
--- a/drivers/acpi/csrt.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Support for Core System Resources Table (CSRT)
- *
- * Copyright (C) 2013, Intel Corporation
- * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
- *	    Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt) "ACPI: CSRT: " fmt
-
-#include <linux/acpi.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/sizes.h>
-
-ACPI_MODULE_NAME("CSRT");
-
-static int __init acpi_csrt_parse_shared_info(struct platform_device *pdev,
-					      const struct acpi_csrt_group *grp)
-{
-	const struct acpi_csrt_shared_info *si;
-	struct resource res[3];
-	size_t nres;
-	int ret;
-
-	memset(res, 0, sizeof(res));
-	nres = 0;
-
-	si = (const struct acpi_csrt_shared_info *)&grp[1];
-	/*
-	 * The peripherals that are listed on CSRT typically support only
-	 * 32-bit addresses so we only use the low part of MMIO base for
-	 * now.
-	 */
-	if (!si->mmio_base_high && si->mmio_base_low) {
-		/*
-		 * There is no size of the memory resource in shared_info
-		 * so we assume that it is 4k here.
-		 */
-		res[nres].start = si->mmio_base_low;
-		res[nres].end = res[0].start + SZ_4K - 1;
-		res[nres++].flags = IORESOURCE_MEM;
-	}
-
-	if (si->gsi_interrupt) {
-		int irq = acpi_register_gsi(NULL, si->gsi_interrupt,
-					    si->interrupt_mode,
-					    si->interrupt_polarity);
-		res[nres].start = irq;
-		res[nres].end = irq;
-		res[nres++].flags = IORESOURCE_IRQ;
-	}
-
-	if (si->base_request_line || si->num_handshake_signals) {
-		/*
-		 * We pass the driver a DMA resource describing the range
-		 * of request lines the device supports.
-		 */
-		res[nres].start = si->base_request_line;
-		res[nres].end = res[nres].start + si->num_handshake_signals - 1;
-		res[nres++].flags = IORESOURCE_DMA;
-	}
-
-	ret = platform_device_add_resources(pdev, res, nres);
-	if (ret) {
-		if (si->gsi_interrupt)
-			acpi_unregister_gsi(si->gsi_interrupt);
-		return ret;
-	}
-
-	return 0;
-}
-
-static int __init
-acpi_csrt_parse_resource_group(const struct acpi_csrt_group *grp)
-{
-	struct platform_device *pdev;
-	char vendor[5], name[16];
-	int ret, i;
-
-	vendor[0] = grp->vendor_id;
-	vendor[1] = grp->vendor_id >> 8;
-	vendor[2] = grp->vendor_id >> 16;
-	vendor[3] = grp->vendor_id >> 24;
-	vendor[4] = '\0';
-
-	if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info))
-		return -ENODEV;
-
-	snprintf(name, sizeof(name), "%s%04X", vendor, grp->device_id);
-	pdev = platform_device_alloc(name, PLATFORM_DEVID_AUTO);
-	if (!pdev)
-		return -ENOMEM;
-
-	/* Add resources based on the shared info */
-	ret = acpi_csrt_parse_shared_info(pdev, grp);
-	if (ret)
-		goto fail;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto fail;
-
-	for (i = 0; i < pdev->num_resources; i++)
-		dev_dbg(&pdev->dev, "%pR\n", &pdev->resource[i]);
-
-	return 0;
-
-fail:
-	platform_device_put(pdev);
-	return ret;
-}
-
-/*
- * CSRT or Core System Resources Table is a proprietary ACPI table
- * introduced by Microsoft. This table can contain devices that are not in
- * the system DSDT table. In particular DMA controllers might be described
- * here.
- *
- * We present these devices as normal platform devices that don't have ACPI
- * IDs or handle. The platform device name will be something like
- * <VENDOR><DEVID>.<n>.auto for example: INTL9C06.0.auto.
- */
-void __init acpi_csrt_init(void)
-{
-	struct acpi_csrt_group *grp, *end;
-	struct acpi_table_csrt *csrt;
-	acpi_status status;
-	int ret;
-
-	status = acpi_get_table(ACPI_SIG_CSRT, 0,
-				(struct acpi_table_header **)&csrt);
-	if (ACPI_FAILURE(status)) {
-		if (status != AE_NOT_FOUND)
-			pr_warn("failed to get the CSRT table\n");
-		return;
-	}
-
-	pr_debug("parsing CSRT table for devices\n");
-
-	grp = (struct acpi_csrt_group *)(csrt + 1);
-	end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length);
-
-	while (grp < end) {
-		ret = acpi_csrt_parse_resource_group(grp);
-		if (ret) {
-			pr_warn("error in parsing resource group: %d\n", ret);
-			return;
-		}
-
-		grp = (struct acpi_csrt_group *)((void *)grp + grp->length);
-	}
-}
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index 96de787..bc493aa 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -37,68 +37,6 @@
 #define _COMPONENT	ACPI_POWER_COMPONENT
 ACPI_MODULE_NAME("device_pm");
 
-static DEFINE_MUTEX(acpi_pm_notifier_lock);
-
-/**
- * acpi_add_pm_notifier - Register PM notifier for given ACPI device.
- * @adev: ACPI device to add the notifier for.
- * @context: Context information to pass to the notifier routine.
- *
- * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of
- * PM wakeup events.  For example, wakeup events may be generated for bridges
- * if one of the devices below the bridge is signaling wakeup, even if the
- * bridge itself doesn't have a wakeup GPE associated with it.
- */
-acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
-				 acpi_notify_handler handler, void *context)
-{
-	acpi_status status = AE_ALREADY_EXISTS;
-
-	mutex_lock(&acpi_pm_notifier_lock);
-
-	if (adev->wakeup.flags.notifier_present)
-		goto out;
-
-	status = acpi_install_notify_handler(adev->handle,
-					     ACPI_SYSTEM_NOTIFY,
-					     handler, context);
-	if (ACPI_FAILURE(status))
-		goto out;
-
-	adev->wakeup.flags.notifier_present = true;
-
- out:
-	mutex_unlock(&acpi_pm_notifier_lock);
-	return status;
-}
-
-/**
- * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device.
- * @adev: ACPI device to remove the notifier from.
- */
-acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
-				    acpi_notify_handler handler)
-{
-	acpi_status status = AE_BAD_PARAMETER;
-
-	mutex_lock(&acpi_pm_notifier_lock);
-
-	if (!adev->wakeup.flags.notifier_present)
-		goto out;
-
-	status = acpi_remove_notify_handler(adev->handle,
-					    ACPI_SYSTEM_NOTIFY,
-					    handler);
-	if (ACPI_FAILURE(status))
-		goto out;
-
-	adev->wakeup.flags.notifier_present = false;
-
- out:
-	mutex_unlock(&acpi_pm_notifier_lock);
-	return status;
-}
-
 /**
  * acpi_power_state_string - String representation of ACPI device power state.
  * @state: ACPI device power state to return the string representation of.
@@ -385,6 +323,69 @@
 }
 EXPORT_SYMBOL(acpi_bus_power_manageable);
 
+#ifdef CONFIG_PM
+static DEFINE_MUTEX(acpi_pm_notifier_lock);
+
+/**
+ * acpi_add_pm_notifier - Register PM notifier for given ACPI device.
+ * @adev: ACPI device to add the notifier for.
+ * @context: Context information to pass to the notifier routine.
+ *
+ * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of
+ * PM wakeup events.  For example, wakeup events may be generated for bridges
+ * if one of the devices below the bridge is signaling wakeup, even if the
+ * bridge itself doesn't have a wakeup GPE associated with it.
+ */
+acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+				 acpi_notify_handler handler, void *context)
+{
+	acpi_status status = AE_ALREADY_EXISTS;
+
+	mutex_lock(&acpi_pm_notifier_lock);
+
+	if (adev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_install_notify_handler(adev->handle,
+					     ACPI_SYSTEM_NOTIFY,
+					     handler, context);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	adev->wakeup.flags.notifier_present = true;
+
+ out:
+	mutex_unlock(&acpi_pm_notifier_lock);
+	return status;
+}
+
+/**
+ * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device.
+ * @adev: ACPI device to remove the notifier from.
+ */
+acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+				    acpi_notify_handler handler)
+{
+	acpi_status status = AE_BAD_PARAMETER;
+
+	mutex_lock(&acpi_pm_notifier_lock);
+
+	if (!adev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_remove_notify_handler(adev->handle,
+					    ACPI_SYSTEM_NOTIFY,
+					    handler);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	adev->wakeup.flags.notifier_present = false;
+
+ out:
+	mutex_unlock(&acpi_pm_notifier_lock);
+	return status;
+}
+
 bool acpi_bus_can_wakeup(acpi_handle handle)
 {
 	struct acpi_device *device;
@@ -1023,3 +1024,4 @@
 	mutex_unlock(&adev->physical_node_lock);
 }
 EXPORT_SYMBOL_GPL(acpi_dev_pm_remove_dependent);
+#endif /* CONFIG_PM */
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 6f1afd9..297cbf4 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -35,7 +35,6 @@
 void acpi_pci_root_hp_init(void);
 void acpi_platform_init(void);
 int acpi_sysfs_init(void);
-void acpi_csrt_init(void);
 #ifdef CONFIG_ACPI_CONTAINER
 void acpi_container_init(void);
 #else
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 1dd6f6c..e427dc5 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -641,7 +641,9 @@
 		/* bus enumerate */
 		printk(KERN_DEBUG "%s: Bus check notify on %s\n", __func__,
 				 (char *)buffer.pointer);
-		if (!root)
+		if (root)
+			acpiphp_check_host_bridge(handle);
+		else
 			handle_root_bridge_insertion(handle);
 
 		break;
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index c1bc608..44225cb 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -2043,7 +2043,6 @@
 	acpi_pci_link_init();
 	acpi_platform_init();
 	acpi_lpss_init();
-	acpi_csrt_init();
 	acpi_container_init();
 	acpi_memory_hotplug_init();
 
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 66f6762..e6bd910 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -161,6 +161,14 @@
 		DMI_MATCH(DMI_PRODUCT_NAME, "UL30VT"),
 		},
 	},
+	{
+	.callback = video_detect_force_vendor,
+	.ident = "Asus UL30A",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"),
+		},
+	},
 	{ },
 };
 
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 1a68f947..d414331 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -1295,6 +1295,7 @@
 
 	return subsys_register(subsys, groups, virtual_dir);
 }
+EXPORT_SYMBOL_GPL(subsys_virtual_register);
 
 int __init buses_init(void)
 {
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 016312437..2499cef 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -572,9 +572,11 @@
 
 	if (dev) {
 		WARN(((attr->attr.mode & S_IWUGO) && !attr->store),
-				"Write permission without 'store'\n");
+			"Attribute %s: write permission without 'store'\n",
+			attr->attr.name);
 		WARN(((attr->attr.mode & S_IRUGO) && !attr->show),
-				"Read permission without 'show'\n");
+			"Attribute %s: read permission without 'show'\n",
+			attr->attr.name);
 		error = sysfs_create_file(&dev->kobj, &attr->attr);
 	}
 
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index bca9c80..8bffa5c 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -84,6 +84,8 @@
 	{ BCMA_CORE_I2S, "I2S" },
 	{ BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
 	{ BCMA_CORE_SHIM, "SHIM" },
+	{ BCMA_CORE_PCIE2, "PCIe Gen2" },
+	{ BCMA_CORE_ARM_CR4, "ARM CR4" },
 	{ BCMA_CORE_DEFAULT, "Default" },
 };
 
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index f1a29f8..9bf4371 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -117,13 +117,13 @@
 
 	spin_lock(&brd->brd_lock);
 	idx = sector >> PAGE_SECTORS_SHIFT;
+	page->index = idx;
 	if (radix_tree_insert(&brd->brd_pages, idx, page)) {
 		__free_page(page);
 		page = radix_tree_lookup(&brd->brd_pages, idx);
 		BUG_ON(!page);
 		BUG_ON(page->index != idx);
-	} else
-		page->index = idx;
+	}
 	spin_unlock(&brd->brd_lock);
 
 	radix_tree_preload_end();
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index f8ef15f..3fd130f 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1160,8 +1160,7 @@
 	dev_dbg(&dev->dev, "ace_probe(%p)\n", dev);
 
 	/* device id and bus width */
-	of_property_read_u32(dev->dev.of_node, "port-number", &id);
-	if (id < 0)
+	if (of_property_read_u32(dev->dev.of_node, "port-number", &id))
 		id = 0;
 	if (of_find_property(dev->dev.of_node, "8-bit", NULL))
 		bus_width = ACE_BUS_WIDTH_8;
diff --git a/drivers/char/lp.c b/drivers/char/lp.c
index dafd9ac..0913d79 100644
--- a/drivers/char/lp.c
+++ b/drivers/char/lp.c
@@ -622,9 +622,12 @@
 				return -EFAULT;
 			break;
 		case LPGETSTATUS:
+			if (mutex_lock_interruptible(&lp_table[minor].port_mutex))
+				return -EINTR;
 			lp_claim_parport_or_block (&lp_table[minor]);
 			status = r_str(minor);
 			lp_release_parport (&lp_table[minor]);
+			mutex_unlock(&lp_table[minor].port_mutex);
 
 			if (copy_to_user(argp, &status, sizeof(int)))
 				return -EFAULT;
diff --git a/drivers/char/random.c b/drivers/char/random.c
index cd9a621..35487e8 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -865,16 +865,24 @@
 	if (r->entropy_count / 8 < min + reserved) {
 		nbytes = 0;
 	} else {
+		int entropy_count, orig;
+retry:
+		entropy_count = orig = ACCESS_ONCE(r->entropy_count);
 		/* If limited, never pull more than available */
-		if (r->limit && nbytes + reserved >= r->entropy_count / 8)
-			nbytes = r->entropy_count/8 - reserved;
+		if (r->limit && nbytes + reserved >= entropy_count / 8)
+			nbytes = entropy_count/8 - reserved;
 
-		if (r->entropy_count / 8 >= nbytes + reserved)
-			r->entropy_count -= nbytes*8;
-		else
-			r->entropy_count = reserved;
+		if (entropy_count / 8 >= nbytes + reserved) {
+			entropy_count -= nbytes*8;
+			if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig)
+				goto retry;
+		} else {
+			entropy_count = reserved;
+			if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig)
+				goto retry;
+		}
 
-		if (r->entropy_count < random_write_wakeup_thresh)
+		if (entropy_count < random_write_wakeup_thresh)
 			wakeup_write = 1;
 	}
 
@@ -957,10 +965,23 @@
 {
 	ssize_t ret = 0, i;
 	__u8 tmp[EXTRACT_SIZE];
+	unsigned long flags;
 
 	/* if last_data isn't primed, we need EXTRACT_SIZE extra bytes */
-	if (fips_enabled && !r->last_data_init)
-		nbytes += EXTRACT_SIZE;
+	if (fips_enabled) {
+		spin_lock_irqsave(&r->lock, flags);
+		if (!r->last_data_init) {
+			r->last_data_init = true;
+			spin_unlock_irqrestore(&r->lock, flags);
+			trace_extract_entropy(r->name, EXTRACT_SIZE,
+					      r->entropy_count, _RET_IP_);
+			xfer_secondary_pool(r, EXTRACT_SIZE);
+			extract_buf(r, tmp);
+			spin_lock_irqsave(&r->lock, flags);
+			memcpy(r->last_data, tmp, EXTRACT_SIZE);
+		}
+		spin_unlock_irqrestore(&r->lock, flags);
+	}
 
 	trace_extract_entropy(r->name, nbytes, r->entropy_count, _RET_IP_);
 	xfer_secondary_pool(r, nbytes);
@@ -970,19 +991,6 @@
 		extract_buf(r, tmp);
 
 		if (fips_enabled) {
-			unsigned long flags;
-
-
-			/* prime last_data value if need be, per fips 140-2 */
-			if (!r->last_data_init) {
-				spin_lock_irqsave(&r->lock, flags);
-				memcpy(r->last_data, tmp, EXTRACT_SIZE);
-				r->last_data_init = true;
-				nbytes -= EXTRACT_SIZE;
-				spin_unlock_irqrestore(&r->lock, flags);
-				extract_buf(r, tmp);
-			}
-
 			spin_lock_irqsave(&r->lock, flags);
 			if (!memcmp(tmp, r->last_data, EXTRACT_SIZE))
 				panic("Hardware RNG duplicated output!\n");
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 4945bd3..d5d2e4a 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -179,7 +179,6 @@
 {
 	int ret = -ENOMEM;
 
-	tpk_port.port.ops = &null_ops;
 	mutex_init(&tpk_port.port_write_mutex);
 
 	ttyprintk_driver = tty_alloc_driver(1,
@@ -190,6 +189,7 @@
 		return PTR_ERR(ttyprintk_driver);
 
 	tty_port_init(&tpk_port.port);
+	tpk_port.port.ops = &null_ops;
 
 	ttyprintk_driver->driver_name = "ttyprintk";
 	ttyprintk_driver->name = "ttyprintk";
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 8292a00..075db0c 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -872,6 +872,14 @@
 	struct clk *clk;
 	int i;
 
+	/* ac97 */
+	clk = tegra_clk_register_periph_gate("ac97", "pll_a_out0",
+				    TEGRA_PERIPH_ON_APB,
+				    clk_base, 0, 3, &periph_l_regs,
+				    periph_clk_enb_refcnt);
+	clk_register_clkdev(clk, NULL, "tegra20-ac97");
+	clks[ac97] = clk;
+
 	/* apbdma */
 	clk = tegra_clk_register_periph_gate("apbdma", "pclk", 0, clk_base,
 				    0, 34, &periph_h_regs,
@@ -1234,9 +1242,6 @@
 	{uartc, pll_p, 0, 0},
 	{uartd, pll_p, 0, 0},
 	{uarte, pll_p, 0, 0},
-	{usbd, clk_max, 12000000, 0},
-	{usb2, clk_max, 12000000, 0},
-	{usb3, clk_max, 12000000, 0},
 	{pll_a, clk_max, 56448000, 1},
 	{pll_a_out0, clk_max, 11289600, 1},
 	{cdev1, clk_max, 0, 1},
diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c
index 5cf4f46..4f45eee 100644
--- a/drivers/clk/x86/clk-lpt.c
+++ b/drivers/clk/x86/clk-lpt.c
@@ -15,22 +15,29 @@
 #include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/platform_data/clk-lpss.h>
 #include <linux/platform_device.h>
 
 #define PRV_CLOCK_PARAMS 0x800
 
 static int lpt_clk_probe(struct platform_device *pdev)
 {
+	struct lpss_clk_data *drvdata;
 	struct clk *clk;
 
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
 	/* LPSS free running clock */
-	clk = clk_register_fixed_rate(&pdev->dev, "lpss_clk", NULL, CLK_IS_ROOT,
-				      100000000);
+	drvdata->name = "lpss_clk";
+	clk = clk_register_fixed_rate(&pdev->dev, drvdata->name, NULL,
+				      CLK_IS_ROOT, 100000000);
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
-	/* Shared DMA clock */
-	clk_register_clkdev(clk, "hclk", "INTL9C60.0.auto");
+	drvdata->clk = clk;
+	platform_set_drvdata(pdev, drvdata);
 	return 0;
 }
 
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index 2b8a8c3..6bd63d6 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -272,7 +272,7 @@
 config X86_E_POWERSAVER
 	tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)"
 	select CPU_FREQ_TABLE
-	depends on X86_32
+	depends on X86_32 && ACPI_PROCESSOR
 	help
 	  This adds the CPUFreq driver for VIA C7 processors.  However, this driver
 	  does not have any safeguards to prevent operating the CPU out of spec
diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c
index 173ed05..fd9e3ea 100644
--- a/drivers/cpufreq/arm_big_little_dt.c
+++ b/drivers/cpufreq/arm_big_little_dt.c
@@ -19,70 +19,75 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/device.h>
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/opp.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include "arm_big_little.h"
 
-static int dt_init_opp_table(struct device *cpu_dev)
+/* get cpu node with valid operating-points */
+static struct device_node *get_cpu_node_with_valid_op(int cpu)
 {
-	struct device_node *np, *parent;
-	int count = 0, ret;
-
-	parent = of_find_node_by_path("/cpus");
-	if (!parent) {
-		pr_err("failed to find OF /cpus\n");
-		return -ENOENT;
-	}
-
-	for_each_child_of_node(parent, np) {
-		if (count++ != cpu_dev->id)
-			continue;
-		if (!of_get_property(np, "operating-points", NULL)) {
-			ret = -ENODATA;
-		} else {
-			cpu_dev->of_node = np;
-			ret = of_init_opp_table(cpu_dev);
-		}
-		of_node_put(np);
-		of_node_put(parent);
-
-		return ret;
-	}
-
-	return -ENODEV;
-}
-
-static int dt_get_transition_latency(struct device *cpu_dev)
-{
-	struct device_node *np, *parent;
-	u32 transition_latency = CPUFREQ_ETERNAL;
+	struct device_node *np = NULL, *parent;
 	int count = 0;
 
 	parent = of_find_node_by_path("/cpus");
 	if (!parent) {
-		pr_info("Failed to find OF /cpus. Use CPUFREQ_ETERNAL transition latency\n");
-		return CPUFREQ_ETERNAL;
+		pr_err("failed to find OF /cpus\n");
+		return NULL;
 	}
 
 	for_each_child_of_node(parent, np) {
-		if (count++ != cpu_dev->id)
+		if (count++ != cpu)
 			continue;
+		if (!of_get_property(np, "operating-points", NULL)) {
+			of_node_put(np);
+			np = NULL;
+		}
 
-		of_property_read_u32(np, "clock-latency", &transition_latency);
-		of_node_put(np);
-		of_node_put(parent);
-
-		return transition_latency;
+		break;
 	}
 
-	pr_info("clock-latency isn't found, use CPUFREQ_ETERNAL transition latency\n");
-	return CPUFREQ_ETERNAL;
+	of_node_put(parent);
+	return np;
+}
+
+static int dt_init_opp_table(struct device *cpu_dev)
+{
+	struct device_node *np;
+	int ret;
+
+	np = get_cpu_node_with_valid_op(cpu_dev->id);
+	if (!np)
+		return -ENODATA;
+
+	cpu_dev->of_node = np;
+	ret = of_init_opp_table(cpu_dev);
+	of_node_put(np);
+
+	return ret;
+}
+
+static int dt_get_transition_latency(struct device *cpu_dev)
+{
+	struct device_node *np;
+	u32 transition_latency = CPUFREQ_ETERNAL;
+
+	np = get_cpu_node_with_valid_op(cpu_dev->id);
+	if (!np)
+		return CPUFREQ_ETERNAL;
+
+	of_property_read_u32(np, "clock-latency", &transition_latency);
+	of_node_put(np);
+
+	pr_debug("%s: clock-latency: %d\n", __func__, transition_latency);
+	return transition_latency;
 }
 
 static struct cpufreq_arm_bL_ops dt_bL_ops = {
@@ -91,17 +96,33 @@
 	.init_opp_table = dt_init_opp_table,
 };
 
-static int generic_bL_init(void)
+static int generic_bL_probe(struct platform_device *pdev)
 {
+	struct device_node *np;
+
+	np = get_cpu_node_with_valid_op(0);
+	if (!np)
+		return -ENODEV;
+
+	of_node_put(np);
 	return bL_cpufreq_register(&dt_bL_ops);
 }
-module_init(generic_bL_init);
 
-static void generic_bL_exit(void)
+static int generic_bL_remove(struct platform_device *pdev)
 {
-	return bL_cpufreq_unregister(&dt_bL_ops);
+	bL_cpufreq_unregister(&dt_bL_ops);
+	return 0;
 }
-module_exit(generic_bL_exit);
+
+static struct platform_driver generic_bL_platdrv = {
+	.driver = {
+		.name	= "arm-bL-cpufreq-dt",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= generic_bL_probe,
+	.remove		= generic_bL_remove,
+};
+module_platform_driver(generic_bL_platdrv);
 
 MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
 MODULE_DESCRIPTION("Generic ARM big LITTLE cpufreq driver via DT");
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 4b8c7f2..2d53f47 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1729,18 +1729,23 @@
 			/* end old governor */
 			if (data->governor) {
 				__cpufreq_governor(data, CPUFREQ_GOV_STOP);
+				unlock_policy_rwsem_write(policy->cpu);
 				__cpufreq_governor(data,
 						CPUFREQ_GOV_POLICY_EXIT);
+				lock_policy_rwsem_write(policy->cpu);
 			}
 
 			/* start new governor */
 			data->governor = policy->governor;
 			if (!__cpufreq_governor(data, CPUFREQ_GOV_POLICY_INIT)) {
-				if (!__cpufreq_governor(data, CPUFREQ_GOV_START))
+				if (!__cpufreq_governor(data, CPUFREQ_GOV_START)) {
 					failed = 0;
-				else
+				} else {
+					unlock_policy_rwsem_write(policy->cpu);
 					__cpufreq_governor(data,
 							CPUFREQ_GOV_POLICY_EXIT);
+					lock_policy_rwsem_write(policy->cpu);
+				}
 			}
 
 			if (failed) {
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 9c36ace..07f2840 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -521,6 +521,7 @@
 static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
 	ICPU(0x2a, default_policy),
 	ICPU(0x2d, default_policy),
+	ICPU(0x3a, default_policy),
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids);
diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
index 8488957..d539127 100644
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/clock.h>
+#include <asm/idle.h>
 
 #include <asm/mach-loongson/loongson.h>
 
@@ -200,6 +201,7 @@
 	LOONGSON_CHIPCFG0 &= ~0x7;	/* Put CPU into wait mode */
 	LOONGSON_CHIPCFG0 = cpu_freq;	/* Restore CPU state */
 	spin_unlock_irqrestore(&loongson2_wait_lock, flags);
+	local_irq_enable();
 }
 
 static int __init cpufreq_init(void)
diff --git a/drivers/crypto/nx/nx-aes-cbc.c b/drivers/crypto/nx/nx-aes-cbc.c
index a76d4c4..35d483f 100644
--- a/drivers/crypto/nx/nx-aes-cbc.c
+++ b/drivers/crypto/nx/nx-aes-cbc.c
@@ -126,6 +126,7 @@
 	.cra_blocksize   = AES_BLOCK_SIZE,
 	.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
 	.cra_type        = &crypto_blkcipher_type,
+	.cra_alignmask   = 0xf,
 	.cra_module      = THIS_MODULE,
 	.cra_init        = nx_crypto_ctx_aes_cbc_init,
 	.cra_exit        = nx_crypto_ctx_exit,
diff --git a/drivers/crypto/nx/nx-aes-ecb.c b/drivers/crypto/nx/nx-aes-ecb.c
index ba5f161..7bbc9a8 100644
--- a/drivers/crypto/nx/nx-aes-ecb.c
+++ b/drivers/crypto/nx/nx-aes-ecb.c
@@ -123,6 +123,7 @@
 	.cra_priority    = 300,
 	.cra_flags       = CRYPTO_ALG_TYPE_BLKCIPHER,
 	.cra_blocksize   = AES_BLOCK_SIZE,
+	.cra_alignmask   = 0xf,
 	.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
 	.cra_type        = &crypto_blkcipher_type,
 	.cra_module      = THIS_MODULE,
diff --git a/drivers/crypto/nx/nx-aes-gcm.c b/drivers/crypto/nx/nx-aes-gcm.c
index c8109ed..6cca6c3 100644
--- a/drivers/crypto/nx/nx-aes-gcm.c
+++ b/drivers/crypto/nx/nx-aes-gcm.c
@@ -219,7 +219,7 @@
 	if (enc)
 		NX_CPB_FDM(csbcpb) |= NX_FDM_ENDE_ENCRYPT;
 	else
-		nbytes -= AES_BLOCK_SIZE;
+		nbytes -= crypto_aead_authsize(crypto_aead_reqtfm(req));
 
 	csbcpb->cpb.aes_gcm.bit_length_data = nbytes * 8;
 
diff --git a/drivers/crypto/nx/nx-sha256.c b/drivers/crypto/nx/nx-sha256.c
index 9767315..67024f2 100644
--- a/drivers/crypto/nx/nx-sha256.c
+++ b/drivers/crypto/nx/nx-sha256.c
@@ -69,7 +69,7 @@
 	 *  1: <= SHA256_BLOCK_SIZE: copy into state, return 0
 	 *  2: > SHA256_BLOCK_SIZE: process X blocks, copy in leftover
 	 */
-	if (len + sctx->count <= SHA256_BLOCK_SIZE) {
+	if (len + sctx->count < SHA256_BLOCK_SIZE) {
 		memcpy(sctx->buf + sctx->count, data, len);
 		sctx->count += len;
 		goto out;
@@ -110,7 +110,8 @@
 	atomic_inc(&(nx_ctx->stats->sha256_ops));
 
 	/* copy the leftover back into the state struct */
-	memcpy(sctx->buf, data + len - leftover, leftover);
+	if (leftover)
+		memcpy(sctx->buf, data + len - leftover, leftover);
 	sctx->count = leftover;
 
 	csbcpb->cpb.sha256.message_bit_length += (u64)
@@ -130,6 +131,7 @@
 	struct nx_sg *in_sg, *out_sg;
 	int rc;
 
+
 	if (NX_CPB_FDM(csbcpb) & NX_FDM_CONTINUATION) {
 		/* we've hit the nx chip previously, now we're finalizing,
 		 * so copy over the partial digest */
@@ -162,7 +164,7 @@
 
 	atomic_inc(&(nx_ctx->stats->sha256_ops));
 
-	atomic64_add(csbcpb->cpb.sha256.message_bit_length,
+	atomic64_add(csbcpb->cpb.sha256.message_bit_length / 8,
 		     &(nx_ctx->stats->sha256_bytes));
 	memcpy(out, csbcpb->cpb.sha256.message_digest, SHA256_DIGEST_SIZE);
 out:
diff --git a/drivers/crypto/nx/nx-sha512.c b/drivers/crypto/nx/nx-sha512.c
index 3177b8c..08eee11 100644
--- a/drivers/crypto/nx/nx-sha512.c
+++ b/drivers/crypto/nx/nx-sha512.c
@@ -69,7 +69,7 @@
 	 *  1: <= SHA512_BLOCK_SIZE: copy into state, return 0
 	 *  2: > SHA512_BLOCK_SIZE: process X blocks, copy in leftover
 	 */
-	if ((u64)len + sctx->count[0] <= SHA512_BLOCK_SIZE) {
+	if ((u64)len + sctx->count[0] < SHA512_BLOCK_SIZE) {
 		memcpy(sctx->buf + sctx->count[0], data, len);
 		sctx->count[0] += len;
 		goto out;
@@ -110,7 +110,8 @@
 	atomic_inc(&(nx_ctx->stats->sha512_ops));
 
 	/* copy the leftover back into the state struct */
-	memcpy(sctx->buf, data + len - leftover, leftover);
+	if (leftover)
+		memcpy(sctx->buf, data + len - leftover, leftover);
 	sctx->count[0] = leftover;
 
 	spbc_bits = csbcpb->cpb.sha512.spbc * 8;
@@ -168,7 +169,7 @@
 		goto out;
 
 	atomic_inc(&(nx_ctx->stats->sha512_ops));
-	atomic64_add(csbcpb->cpb.sha512.message_bit_length_lo,
+	atomic64_add(csbcpb->cpb.sha512.message_bit_length_lo / 8,
 		     &(nx_ctx->stats->sha512_bytes));
 
 	memcpy(out, csbcpb->cpb.sha512.message_digest, SHA512_DIGEST_SIZE);
diff --git a/drivers/crypto/nx/nx.c b/drivers/crypto/nx/nx.c
index c767f23..bbdab6e 100644
--- a/drivers/crypto/nx/nx.c
+++ b/drivers/crypto/nx/nx.c
@@ -211,44 +211,20 @@
 {
 	struct nx_sg *nx_insg = nx_ctx->in_sg;
 	struct nx_sg *nx_outsg = nx_ctx->out_sg;
-	struct blkcipher_walk walk;
-	int rc;
-
-	blkcipher_walk_init(&walk, dst, src, nbytes);
-	rc = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE);
-	if (rc)
-		goto out;
 
 	if (iv)
-		memcpy(iv, walk.iv, AES_BLOCK_SIZE);
+		memcpy(iv, desc->info, AES_BLOCK_SIZE);
 
-	while (walk.nbytes) {
-		nx_insg = nx_build_sg_list(nx_insg, walk.src.virt.addr,
-					   walk.nbytes, nx_ctx->ap->sglen);
-		nx_outsg = nx_build_sg_list(nx_outsg, walk.dst.virt.addr,
-					    walk.nbytes, nx_ctx->ap->sglen);
-
-		rc = blkcipher_walk_done(desc, &walk, 0);
-		if (rc)
-			break;
-	}
-
-	if (walk.nbytes) {
-		nx_insg = nx_build_sg_list(nx_insg, walk.src.virt.addr,
-					   walk.nbytes, nx_ctx->ap->sglen);
-		nx_outsg = nx_build_sg_list(nx_outsg, walk.dst.virt.addr,
-					    walk.nbytes, nx_ctx->ap->sglen);
-
-		rc = 0;
-	}
+	nx_insg = nx_walk_and_build(nx_insg, nx_ctx->ap->sglen, src, 0, nbytes);
+	nx_outsg = nx_walk_and_build(nx_outsg, nx_ctx->ap->sglen, dst, 0, nbytes);
 
 	/* these lengths should be negative, which will indicate to phyp that
 	 * the input and output parameters are scatterlists, not linear
 	 * buffers */
 	nx_ctx->op.inlen = (nx_ctx->in_sg - nx_insg) * sizeof(struct nx_sg);
 	nx_ctx->op.outlen = (nx_ctx->out_sg - nx_outsg) * sizeof(struct nx_sg);
-out:
-	return rc;
+
+	return 0;
 }
 
 /**
@@ -454,6 +430,8 @@
 	if (rc)
 		goto out;
 
+	nx_driver.of.status = NX_OKAY;
+
 	rc = crypto_register_alg(&nx_ecb_aes_alg);
 	if (rc)
 		goto out;
@@ -498,8 +476,6 @@
 	if (rc)
 		goto out_unreg_s512;
 
-	nx_driver.of.status = NX_OKAY;
-
 	goto out;
 
 out_unreg_s512:
diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c
index ba6fc62..5a18f82 100644
--- a/drivers/dma/acpi-dma.c
+++ b/drivers/dma/acpi-dma.c
@@ -4,7 +4,8 @@
  * Based on of-dma.c
  *
  * Copyright (C) 2013, Intel Corporation
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *	    Mika Westerberg <mika.westerberg@linux.intel.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
+#include <linux/ioport.h>
 #include <linux/acpi.h>
 #include <linux/acpi_dma.h>
 
@@ -23,6 +25,117 @@
 static DEFINE_MUTEX(acpi_dma_lock);
 
 /**
+ * acpi_dma_parse_resource_group - match device and parse resource group
+ * @grp:	CSRT resource group
+ * @adev:	ACPI device to match with
+ * @adma:	struct acpi_dma of the given DMA controller
+ *
+ * Returns 1 on success, 0 when no information is available, or appropriate
+ * errno value on error.
+ *
+ * In order to match a device from DSDT table to the corresponding CSRT device
+ * we use MMIO address and IRQ.
+ */
+static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp,
+		struct acpi_device *adev, struct acpi_dma *adma)
+{
+	const struct acpi_csrt_shared_info *si;
+	struct list_head resource_list;
+	struct resource_list_entry *rentry;
+	resource_size_t mem = 0, irq = 0;
+	u32 vendor_id;
+	int ret;
+
+	if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info))
+		return -ENODEV;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+	if (ret <= 0)
+		return 0;
+
+	list_for_each_entry(rentry, &resource_list, node) {
+		if (resource_type(&rentry->res) == IORESOURCE_MEM)
+			mem = rentry->res.start;
+		else if (resource_type(&rentry->res) == IORESOURCE_IRQ)
+			irq = rentry->res.start;
+	}
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	/* Consider initial zero values as resource not found */
+	if (mem == 0 && irq == 0)
+		return 0;
+
+	si = (const struct acpi_csrt_shared_info *)&grp[1];
+
+	/* Match device by MMIO and IRQ */
+	if (si->mmio_base_low != mem || si->gsi_interrupt != irq)
+		return 0;
+
+	vendor_id = le32_to_cpu(grp->vendor_id);
+	dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n",
+		(char *)&vendor_id, grp->device_id, grp->revision);
+
+	/* Check if the request line range is available */
+	if (si->base_request_line == 0 && si->num_handshake_signals == 0)
+		return 0;
+
+	adma->base_request_line = si->base_request_line;
+	adma->end_request_line = si->base_request_line +
+				 si->num_handshake_signals - 1;
+
+	dev_dbg(&adev->dev, "request line base: 0x%04x end: 0x%04x\n",
+		adma->base_request_line, adma->end_request_line);
+
+	return 1;
+}
+
+/**
+ * acpi_dma_parse_csrt - parse CSRT to exctract additional DMA resources
+ * @adev:	ACPI device to match with
+ * @adma:	struct acpi_dma of the given DMA controller
+ *
+ * CSRT or Core System Resources Table is a proprietary ACPI table
+ * introduced by Microsoft. This table can contain devices that are not in
+ * the system DSDT table. In particular DMA controllers might be described
+ * here.
+ *
+ * We are using this table to get the request line range of the specific DMA
+ * controller to be used later.
+ *
+ */
+static void acpi_dma_parse_csrt(struct acpi_device *adev, struct acpi_dma *adma)
+{
+	struct acpi_csrt_group *grp, *end;
+	struct acpi_table_csrt *csrt;
+	acpi_status status;
+	int ret;
+
+	status = acpi_get_table(ACPI_SIG_CSRT, 0,
+				(struct acpi_table_header **)&csrt);
+	if (ACPI_FAILURE(status)) {
+		if (status != AE_NOT_FOUND)
+			dev_warn(&adev->dev, "failed to get the CSRT table\n");
+		return;
+	}
+
+	grp = (struct acpi_csrt_group *)(csrt + 1);
+	end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length);
+
+	while (grp < end) {
+		ret = acpi_dma_parse_resource_group(grp, adev, adma);
+		if (ret < 0) {
+			dev_warn(&adev->dev,
+				 "error in parsing resource group\n");
+			return;
+		}
+
+		grp = (struct acpi_csrt_group *)((void *)grp + grp->length);
+	}
+}
+
+/**
  * acpi_dma_controller_register - Register a DMA controller to ACPI DMA helpers
  * @dev:		struct device of DMA controller
  * @acpi_dma_xlate:	translation function which converts a dma specifier
@@ -61,6 +174,8 @@
 	adma->acpi_dma_xlate = acpi_dma_xlate;
 	adma->data = data;
 
+	acpi_dma_parse_csrt(adev, adma);
+
 	/* Now queue acpi_dma controller structure in list */
 	mutex_lock(&acpi_dma_lock);
 	list_add_tail(&adma->dma_controllers, &acpi_dma_list);
@@ -149,6 +264,45 @@
 }
 EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free);
 
+/**
+ * acpi_dma_update_dma_spec - prepare dma specifier to pass to translation function
+ * @adma:	struct acpi_dma of DMA controller
+ * @dma_spec:	dma specifier to update
+ *
+ * Returns 0, if no information is avaiable, -1 on mismatch, and 1 otherwise.
+ *
+ * Accordingly to ACPI 5.0 Specification Table 6-170 "Fixed DMA Resource
+ * Descriptor":
+ *	DMA Request Line bits is a platform-relative number uniquely
+ *	identifying the request line assigned. Request line-to-Controller
+ *	mapping is done in a controller-specific OS driver.
+ * That's why we can safely adjust slave_id when the appropriate controller is
+ * found.
+ */
+static int acpi_dma_update_dma_spec(struct acpi_dma *adma,
+		struct acpi_dma_spec *dma_spec)
+{
+	/* Set link to the DMA controller device */
+	dma_spec->dev = adma->dev;
+
+	/* Check if the request line range is available */
+	if (adma->base_request_line == 0 && adma->end_request_line == 0)
+		return 0;
+
+	/* Check if slave_id falls to the range */
+	if (dma_spec->slave_id < adma->base_request_line ||
+	    dma_spec->slave_id > adma->end_request_line)
+		return -1;
+
+	/*
+	 * Here we adjust slave_id. It should be a relative number to the base
+	 * request line.
+	 */
+	dma_spec->slave_id -= adma->base_request_line;
+
+	return 1;
+}
+
 struct acpi_dma_parser_data {
 	struct acpi_dma_spec dma_spec;
 	size_t index;
@@ -193,6 +347,7 @@
 	struct acpi_device *adev;
 	struct acpi_dma *adma;
 	struct dma_chan *chan = NULL;
+	int found;
 
 	/* Check if the device was enumerated by ACPI */
 	if (!dev || !ACPI_HANDLE(dev))
@@ -219,9 +374,20 @@
 	mutex_lock(&acpi_dma_lock);
 
 	list_for_each_entry(adma, &acpi_dma_list, dma_controllers) {
-		dma_spec->dev = adma->dev;
+		/*
+		 * We are not going to call translation function if slave_id
+		 * doesn't fall to the request range.
+		 */
+		found = acpi_dma_update_dma_spec(adma, dma_spec);
+		if (found < 0)
+			continue;
 		chan = adma->acpi_dma_xlate(dma_spec, adma);
-		if (chan)
+		/*
+		 * Try to get a channel only from the DMA controller that
+		 * matches the slave_id. See acpi_dma_update_dma_spec()
+		 * description for the details.
+		 */
+		if (found > 0 || chan)
 			break;
 	}
 
diff --git a/drivers/edac/amd64_edac_inj.c b/drivers/edac/amd64_edac_inj.c
index 8c171fa..845f047 100644
--- a/drivers/edac/amd64_edac_inj.c
+++ b/drivers/edac/amd64_edac_inj.c
@@ -202,9 +202,9 @@
 		   amd64_inject_word_show, amd64_inject_word_store);
 static DEVICE_ATTR(inject_ecc_vector, S_IRUGO | S_IWUSR,
 		   amd64_inject_ecc_vector_show, amd64_inject_ecc_vector_store);
-static DEVICE_ATTR(inject_write, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(inject_write, S_IWUSR,
 		   NULL, amd64_inject_write_store);
-static DEVICE_ATTR(inject_read, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(inject_read,  S_IWUSR,
 		   NULL, amd64_inject_read_store);
 
 
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 87d5670..573c449 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -636,7 +636,7 @@
 
 config GPIO_MCP23S08
 	tristate "Microchip MCP23xxx I/O expander"
-	depends on SPI_MASTER || I2C
+	depends on (SPI_MASTER && !I2C) || I2C
 	help
 	  SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
 	  I/O expanders.
diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c
index 634c3d3..62ef10a 100644
--- a/drivers/gpio/gpio-langwell.c
+++ b/drivers/gpio/gpio-langwell.c
@@ -324,6 +324,7 @@
 	resource_size_t start, len;
 	struct lnw_gpio *lnw;
 	u32 gpio_base;
+	u32 irq_base;
 	int retval;
 	int ngpio = id->driver_data;
 
@@ -345,6 +346,7 @@
 		retval = -EFAULT;
 		goto err_ioremap;
 	}
+	irq_base = *(u32 *)base;
 	gpio_base = *((u32 *)base + 1);
 	/* release the IO mapping, since we already get the info from bar1 */
 	iounmap(base);
@@ -365,13 +367,6 @@
 		goto err_ioremap;
 	}
 
-	lnw->domain = irq_domain_add_linear(pdev->dev.of_node, ngpio,
-					    &lnw_gpio_irq_ops, lnw);
-	if (!lnw->domain) {
-		retval = -ENOMEM;
-		goto err_ioremap;
-	}
-
 	lnw->reg_base = base;
 	lnw->chip.label = dev_name(&pdev->dev);
 	lnw->chip.request = lnw_gpio_request;
@@ -384,6 +379,14 @@
 	lnw->chip.ngpio = ngpio;
 	lnw->chip.can_sleep = 0;
 	lnw->pdev = pdev;
+
+	lnw->domain = irq_domain_add_simple(pdev->dev.of_node, ngpio, irq_base,
+					    &lnw_gpio_irq_ops, lnw);
+	if (!lnw->domain) {
+		retval = -ENOMEM;
+		goto err_ioremap;
+	}
+
 	pci_set_drvdata(pdev, lnw);
 	retval = gpiochip_add(&lnw->chip);
 	if (retval) {
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index b733665..0966f26 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -496,8 +496,7 @@
 err_gpiochip_add:
 	while (--i >= 0) {
 		chip--;
-		ret = gpiochip_remove(&chip->gpio);
-		if (ret)
+		if (gpiochip_remove(&chip->gpio))
 			dev_err(&pdev->dev, "Failed gpiochip_remove(%d)\n", i);
 	}
 	kfree(chip_save);
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index 25000b0..f8e6af2 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -326,7 +326,8 @@
 
 	err = bgpio_init(&port->bgc, &pdev->dev, 4,
 			 port->base + PINCTRL_DIN(port),
-			 port->base + PINCTRL_DOUT(port), NULL,
+			 port->base + PINCTRL_DOUT(port) + MXS_SET,
+			 port->base + PINCTRL_DOUT(port) + MXS_CLR,
 			 port->base + PINCTRL_DOE(port), NULL, 0);
 	if (err)
 		goto out_irqdesc_free;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 2050891..d3f7d2d 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -69,6 +69,7 @@
 	bool is_mpuio;
 	bool dbck_flag;
 	bool loses_context;
+	bool context_valid;
 	int stride;
 	u32 width;
 	int context_loss_count;
@@ -1128,6 +1129,10 @@
 			bank->loses_context = true;
 	} else {
 		bank->loses_context = pdata->loses_context;
+
+		if (bank->loses_context)
+			bank->get_context_loss_count =
+				pdata->get_context_loss_count;
 	}
 
 
@@ -1178,9 +1183,6 @@
 	omap_gpio_chip_init(bank);
 	omap_gpio_show_rev(bank);
 
-	if (bank->loses_context)
-		bank->get_context_loss_count = pdata->get_context_loss_count;
-
 	pm_runtime_put(bank->dev);
 
 	list_add_tail(&bank->node, &omap_gpio_list);
@@ -1259,6 +1261,8 @@
 	return 0;
 }
 
+static void omap_gpio_init_context(struct gpio_bank *p);
+
 static int omap_gpio_runtime_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -1268,6 +1272,20 @@
 	int c;
 
 	spin_lock_irqsave(&bank->lock, flags);
+
+	/*
+	 * On the first resume during the probe, the context has not
+	 * been initialised and so initialise it now. Also initialise
+	 * the context loss count.
+	 */
+	if (bank->loses_context && !bank->context_valid) {
+		omap_gpio_init_context(bank);
+
+		if (bank->get_context_loss_count)
+			bank->context_loss_count =
+				bank->get_context_loss_count(bank->dev);
+	}
+
 	_gpio_dbck_enable(bank);
 
 	/*
@@ -1384,6 +1402,29 @@
 }
 
 #if defined(CONFIG_PM_RUNTIME)
+static void omap_gpio_init_context(struct gpio_bank *p)
+{
+	struct omap_gpio_reg_offs *regs = p->regs;
+	void __iomem *base = p->base;
+
+	p->context.ctrl		= __raw_readl(base + regs->ctrl);
+	p->context.oe		= __raw_readl(base + regs->direction);
+	p->context.wake_en	= __raw_readl(base + regs->wkup_en);
+	p->context.leveldetect0	= __raw_readl(base + regs->leveldetect0);
+	p->context.leveldetect1	= __raw_readl(base + regs->leveldetect1);
+	p->context.risingdetect	= __raw_readl(base + regs->risingdetect);
+	p->context.fallingdetect = __raw_readl(base + regs->fallingdetect);
+	p->context.irqenable1	= __raw_readl(base + regs->irqenable);
+	p->context.irqenable2	= __raw_readl(base + regs->irqenable2);
+
+	if (regs->set_dataout && p->regs->clr_dataout)
+		p->context.dataout = __raw_readl(base + regs->set_dataout);
+	else
+		p->context.dataout = __raw_readl(base + regs->dataout);
+
+	p->context_valid = true;
+}
+
 static void omap_gpio_restore_context(struct gpio_bank *bank)
 {
 	__raw_writel(bank->context.wake_en,
@@ -1421,6 +1462,7 @@
 #else
 #define omap_gpio_runtime_suspend NULL
 #define omap_gpio_runtime_resume NULL
+static void omap_gpio_init_context(struct gpio_bank *p) {}
 #endif
 
 static const struct dev_pm_ops gpio_pm_ops = {
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index cdf5996..0fec097 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -424,8 +424,7 @@
 err_request_irq:
 	irq_free_descs(irq_base, gpio_pins[chip->ioh]);
 
-	ret = gpiochip_remove(&chip->gpio);
-	if (ret)
+	if (gpiochip_remove(&chip->gpio))
 		dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__);
 
 err_gpiochip_add:
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 1e4de16..5af6571 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -272,10 +272,8 @@
 	return 0;
 
 err_sch_gpio_resume:
-	err = gpiochip_remove(&sch_gpio_core);
-	if (err)
-		dev_err(&pdev->dev, "%s failed, %d\n",
-				"gpiochip_remove()", err);
+	if (gpiochip_remove(&sch_gpio_core))
+		dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__);
 
 err_sch_gpio_core:
 	release_region(res->start, resource_size(res));
diff --git a/drivers/gpio/gpio-viperboard.c b/drivers/gpio/gpio-viperboard.c
index 095ab14..5ac2919 100644
--- a/drivers/gpio/gpio-viperboard.c
+++ b/drivers/gpio/gpio-viperboard.c
@@ -446,7 +446,8 @@
 	return ret;
 
 err_gpiob:
-	ret = gpiochip_remove(&vb_gpio->gpioa);
+	if (gpiochip_remove(&vb_gpio->gpioa))
+		dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__);
 
 err_gpioa:
 	return ret;
diff --git a/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c
index 955af12..a36e64e 100644
--- a/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c
@@ -138,7 +138,6 @@
 		device->oclass[NVDEV_ENGINE_BSP    ] = &nvc0_bsp_oclass;
 		device->oclass[NVDEV_ENGINE_PPP    ] = &nvc0_ppp_oclass;
 		device->oclass[NVDEV_ENGINE_COPY0  ] = &nvc0_copy0_oclass;
-		device->oclass[NVDEV_ENGINE_COPY1  ] = &nvc0_copy1_oclass;
 		device->oclass[NVDEV_ENGINE_DISP   ] = &nva3_disp_oclass;
 		break;
 	case 0xce:
@@ -225,7 +224,6 @@
 		device->oclass[NVDEV_ENGINE_BSP    ] = &nvc0_bsp_oclass;
 		device->oclass[NVDEV_ENGINE_PPP    ] = &nvc0_ppp_oclass;
 		device->oclass[NVDEV_ENGINE_COPY0  ] = &nvc0_copy0_oclass;
-		device->oclass[NVDEV_ENGINE_COPY1  ] = &nvc0_copy1_oclass;
 		device->oclass[NVDEV_ENGINE_DISP   ] = &nva3_disp_oclass;
 		break;
 	case 0xc8:
diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c
index ddaeb55..89bf459 100644
--- a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c
+++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c
@@ -47,6 +47,7 @@
 	struct nouveau_gpuobj *cur;
 	int i, p;
 
+	mutex_lock(&nv_subdev(priv)->mutex);
 	cur = priv->playlist[priv->cur_playlist];
 	priv->cur_playlist = !priv->cur_playlist;
 
@@ -60,6 +61,7 @@
 	nv_wr32(priv, 0x0032f4, cur->addr >> 12);
 	nv_wr32(priv, 0x0032ec, p);
 	nv_wr32(priv, 0x002500, 0x00000101);
+	mutex_unlock(&nv_subdev(priv)->mutex);
 }
 
 static int
diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c
index 4d4a6b9..46dfa68 100644
--- a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c
@@ -71,6 +71,7 @@
 	struct nouveau_gpuobj *cur;
 	int i, p;
 
+	mutex_lock(&nv_subdev(priv)->mutex);
 	cur = priv->playlist[priv->cur_playlist];
 	priv->cur_playlist = !priv->cur_playlist;
 
@@ -87,6 +88,7 @@
 	nv_wr32(priv, 0x002274, 0x01f00000 | (p >> 3));
 	if (!nv_wait(priv, 0x00227c, 0x00100000, 0x00000000))
 		nv_error(priv, "playlist update failed\n");
+	mutex_unlock(&nv_subdev(priv)->mutex);
 }
 
 static int
@@ -248,9 +250,17 @@
 	struct nvc0_fifo_priv *priv = (void *)object->engine;
 	struct nvc0_fifo_chan *chan = (void *)object;
 	u32 chid = chan->base.chid;
+	u32 mask, engine;
 
 	nv_mask(priv, 0x003004 + (chid * 8), 0x00000001, 0x00000000);
 	nvc0_fifo_playlist_update(priv);
+	mask = nv_rd32(priv, 0x0025a4);
+	for (engine = 0; mask && engine < 16; engine++) {
+		if (!(mask & (1 << engine)))
+			continue;
+		nv_mask(priv, 0x0025a8 + (engine * 4), 0x00000000, 0x00000000);
+		mask &= ~(1 << engine);
+	}
 	nv_wr32(priv, 0x003000 + (chid * 8), 0x00000000);
 
 	return nouveau_fifo_channel_fini(&chan->base, suspend);
diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
index 9151919..56192a7 100644
--- a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
@@ -94,11 +94,13 @@
 	u32 match = (engine << 16) | 0x00000001;
 	int i, p;
 
+	mutex_lock(&nv_subdev(priv)->mutex);
 	cur = engn->playlist[engn->cur_playlist];
 	if (unlikely(cur == NULL)) {
 		int ret = nouveau_gpuobj_new(nv_object(priv), NULL,
 					     0x8000, 0x1000, 0, &cur);
 		if (ret) {
+			mutex_unlock(&nv_subdev(priv)->mutex);
 			nv_error(priv, "playlist alloc failed\n");
 			return;
 		}
@@ -122,6 +124,7 @@
 	nv_wr32(priv, 0x002274, (engine << 20) | (p >> 3));
 	if (!nv_wait(priv, 0x002284 + (engine * 4), 0x00100000, 0x00000000))
 		nv_error(priv, "playlist %d update timeout\n", engine);
+	mutex_unlock(&nv_subdev(priv)->mutex);
 }
 
 static int
diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c
index c300b5e..c434d39 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c
@@ -1940,8 +1940,8 @@
 	trace("ZM_MASK_ADD\tR[0x%06x] &= 0x%08x += 0x%08x\n", addr, mask, add);
 	init->offset += 13;
 
-	data  =  init_rd32(init, addr) & mask;
-	data |= ((data + add) & ~mask);
+	data =  init_rd32(init, addr);
+	data = (data & mask) | ((data + add) & ~mask);
 	init_wr32(init, addr, data);
 }
 
diff --git a/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c
index e4940fb..fb794e9 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c
@@ -29,7 +29,6 @@
 struct nvc0_ltcg_priv {
 	struct nouveau_ltcg base;
 	u32 part_nr;
-	u32 part_mask;
 	u32 subp_nr;
 	struct nouveau_mm tags;
 	u32 num_tags;
@@ -105,8 +104,6 @@
 
 	/* wait until it's finished with clearing */
 	for (p = 0; p < priv->part_nr; ++p) {
-		if (!(priv->part_mask & (1 << p)))
-			continue;
 		for (i = 0; i < priv->subp_nr; ++i)
 			nv_wait(priv, 0x1410c8 + p * 0x2000 + i * 0x400, ~0, 0);
 	}
@@ -121,6 +118,8 @@
 	int ret;
 
 	nv_wr32(priv, 0x17e8d8, priv->part_nr);
+	if (nv_device(pfb)->card_type >= NV_E0)
+		nv_wr32(priv, 0x17e000, priv->part_nr);
 
 	/* tags for 1/4 of VRAM should be enough (8192/4 per GiB of VRAM) */
 	priv->num_tags = (pfb->ram.size >> 17) / 4;
@@ -167,16 +166,20 @@
 {
 	struct nvc0_ltcg_priv *priv;
 	struct nouveau_fb *pfb = nouveau_fb(parent);
-	int ret;
+	u32 parts, mask;
+	int ret, i;
 
 	ret = nouveau_ltcg_create(parent, engine, oclass, &priv);
 	*pobject = nv_object(priv);
 	if (ret)
 		return ret;
 
-	priv->part_nr = nv_rd32(priv, 0x022438);
-	priv->part_mask = nv_rd32(priv, 0x022554);
-
+	parts = nv_rd32(priv, 0x022438);
+	mask = nv_rd32(priv, 0x022554);
+	for (i = 0; i < parts; i++) {
+		if (!(mask & (1 << i)))
+			priv->part_nr++;
+	}
 	priv->subp_nr = nv_rd32(priv, 0x17e8dc) >> 28;
 
 	nv_mask(priv, 0x17e820, 0x00100000, 0x00000000); /* INTR_EN &= ~0x10 */
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 46c152f..383f4e6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -453,18 +453,32 @@
 	NV_INFO(drm, "evicting buffers...\n");
 	ttm_bo_evict_mm(&drm->ttm.bdev, TTM_PL_VRAM);
 
+	NV_INFO(drm, "waiting for kernel channels to go idle...\n");
+	if (drm->cechan) {
+		ret = nouveau_channel_idle(drm->cechan);
+		if (ret)
+			return ret;
+	}
+
+	if (drm->channel) {
+		ret = nouveau_channel_idle(drm->channel);
+		if (ret)
+			return ret;
+	}
+
+	NV_INFO(drm, "suspending client object trees...\n");
 	if (drm->fence && nouveau_fence(drm)->suspend) {
 		if (!nouveau_fence(drm)->suspend(drm))
 			return -ENOMEM;
 	}
 
-	NV_INFO(drm, "suspending client object trees...\n");
 	list_for_each_entry(cli, &drm->clients, head) {
 		ret = nouveau_client_fini(&cli->base, true);
 		if (ret)
 			goto fail_client;
 	}
 
+	NV_INFO(drm, "suspending kernel object tree...\n");
 	ret = nouveau_client_fini(&drm->client.base, true);
 	if (ret)
 		goto fail_client;
@@ -514,17 +528,18 @@
 
 	nouveau_agp_reset(drm);
 
-	NV_INFO(drm, "resuming client object trees...\n");
+	NV_INFO(drm, "resuming kernel object tree...\n");
 	nouveau_client_init(&drm->client.base);
 	nouveau_agp_init(drm);
 
+	NV_INFO(drm, "resuming client object trees...\n");
+	if (drm->fence && nouveau_fence(drm)->resume)
+		nouveau_fence(drm)->resume(drm);
+
 	list_for_each_entry(cli, &drm->clients, head) {
 		nouveau_client_init(&cli->base);
 	}
 
-	if (drm->fence && nouveau_fence(drm)->resume)
-		nouveau_fence(drm)->resume(drm);
-
 	nouveau_run_vbios_init(dev);
 	nouveau_pm_resume(dev);
 
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 6d6fdb3..d5df8fd 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1811,12 +1811,9 @@
 
 static void atombios_crtc_prepare(struct drm_crtc *crtc)
 {
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct radeon_device *rdev = dev->dev_private;
 
-	radeon_crtc->in_mode_set = true;
-
 	/* disable crtc pair power gating before programming */
 	if (ASIC_IS_DCE6(rdev))
 		atombios_powergate_crtc(crtc, ATOM_DISABLE);
@@ -1827,11 +1824,8 @@
 
 static void atombios_crtc_commit(struct drm_crtc *crtc)
 {
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
-
 	atombios_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
 	atombios_lock_crtc(crtc, ATOM_DISABLE);
-	radeon_crtc->in_mode_set = false;
 }
 
 static void atombios_crtc_disable(struct drm_crtc *crtc)
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 105bafb..8f9e2d3 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -2343,11 +2343,13 @@
 	u32 crtc_enabled, tmp, frame_count, blackout;
 	int i, j;
 
-	save->vga_render_control = RREG32(VGA_RENDER_CONTROL);
-	save->vga_hdp_control = RREG32(VGA_HDP_CONTROL);
+	if (!ASIC_IS_NODCE(rdev)) {
+		save->vga_render_control = RREG32(VGA_RENDER_CONTROL);
+		save->vga_hdp_control = RREG32(VGA_HDP_CONTROL);
 
-	/* disable VGA render */
-	WREG32(VGA_RENDER_CONTROL, 0);
+		/* disable VGA render */
+		WREG32(VGA_RENDER_CONTROL, 0);
+	}
 	/* blank the display controllers */
 	for (i = 0; i < rdev->num_crtc; i++) {
 		crtc_enabled = RREG32(EVERGREEN_CRTC_CONTROL + crtc_offsets[i]) & EVERGREEN_CRTC_MASTER_EN;
@@ -2438,8 +2440,11 @@
 		WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + crtc_offsets[i],
 		       (u32)rdev->mc.vram_start);
 	}
-	WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS_HIGH, upper_32_bits(rdev->mc.vram_start));
-	WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS, (u32)rdev->mc.vram_start);
+
+	if (!ASIC_IS_NODCE(rdev)) {
+		WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS_HIGH, upper_32_bits(rdev->mc.vram_start));
+		WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS, (u32)rdev->mc.vram_start);
+	}
 
 	/* unlock regs and wait for update */
 	for (i = 0; i < rdev->num_crtc; i++) {
@@ -2499,10 +2504,12 @@
 			}
 		}
 	}
-	/* Unlock vga access */
-	WREG32(VGA_HDP_CONTROL, save->vga_hdp_control);
-	mdelay(1);
-	WREG32(VGA_RENDER_CONTROL, save->vga_render_control);
+	if (!ASIC_IS_NODCE(rdev)) {
+		/* Unlock vga access */
+		WREG32(VGA_HDP_CONTROL, save->vga_hdp_control);
+		mdelay(1);
+		WREG32(VGA_RENDER_CONTROL, save->vga_render_control);
+	}
 }
 
 void evergreen_mc_program(struct radeon_device *rdev)
@@ -3405,8 +3412,8 @@
 		rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
 	} else {
 		/* size in MB on evergreen/cayman/tn */
-		rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
-		rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
+		rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL;
+		rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL;
 	}
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
 	r700_vram_gtt_location(rdev, &rdev->mc);
diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c
index b4ab8ce..ed7c8a7 100644
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -154,19 +154,18 @@
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-	u32 base_rate = 48000;
+	u32 base_rate = 24000;
 
 	if (!dig || !dig->afmt)
 		return;
 
-	/* XXX: properly calculate this */
 	/* XXX two dtos; generally use dto0 for hdmi */
 	/* Express [24MHz / target pixel clock] as an exact rational
 	 * number (coefficient of two integer numbers.  DCCG_AUDIO_DTOx_PHASE
 	 * is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
 	 */
-	WREG32(DCCG_AUDIO_DTO0_PHASE, (base_rate*50) & 0xffffff);
-	WREG32(DCCG_AUDIO_DTO0_MODULE, (clock*100) & 0xffffff);
+	WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
+	WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
 	WREG32(DCCG_AUDIO_DTO_SOURCE, DCCG_AUDIO_DTO0_SOURCE_SEL(radeon_crtc->crtc_id));
 }
 
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index 47f180a..456750a 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -232,7 +232,7 @@
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-	u32 base_rate = 48000;
+	u32 base_rate = 24000;
 
 	if (!dig || !dig->afmt)
 		return;
@@ -240,7 +240,6 @@
 	/* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT.
 	 * doesn't matter which one you use.  Just use the first one.
 	 */
-	/* XXX: properly calculate this */
 	/* XXX two dtos; generally use dto0 for hdmi */
 	/* Express [24MHz / target pixel clock] as an exact rational
 	 * number (coefficient of two integer numbers.  DCCG_AUDIO_DTOx_PHASE
@@ -250,13 +249,13 @@
 		/* according to the reg specs, this should DCE3.2 only, but in
 		 * practice it seems to cover DCE3.0 as well.
 		 */
-		WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 50);
+		WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
 		WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
 		WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
 	} else {
 		/* according to the reg specs, this should be DCE2.0 and DCE3.0 */
-		WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate * 50) |
-		       AUDIO_DTO_MODULE(clock * 100));
+		WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) |
+		       AUDIO_DTO_MODULE(clock / 10));
 	}
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 1442ce7..142ce6c 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1694,6 +1694,7 @@
 	int num_crtc; /* number of crtcs */
 	struct mutex dc_hw_i2c_mutex; /* display controller hw i2c mutex */
 	bool audio_enabled;
+	bool has_uvd;
 	struct r600_audio audio_status; /* audio stuff */
 	struct notifier_block acpi_nb;
 	/* only one userspace can use Hyperz features or CMASK at a time */
@@ -1838,6 +1839,7 @@
 #define ASIC_IS_DCE61(rdev) ((rdev->family >= CHIP_ARUBA) && \
 			     (rdev->flags & RADEON_IS_IGP))
 #define ASIC_IS_DCE64(rdev) ((rdev->family == CHIP_OLAND))
+#define ASIC_IS_NODCE(rdev) ((rdev->family == CHIP_HAINAN))
 
 /*
  * BIOS helpers.
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index 6417132..06b8c19 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -1935,6 +1935,8 @@
 	else
 		rdev->num_crtc = 2;
 
+	rdev->has_uvd = false;
+
 	switch (rdev->family) {
 	case CHIP_R100:
 	case CHIP_RV100:
@@ -1999,16 +2001,22 @@
 	case CHIP_RV635:
 	case CHIP_RV670:
 		rdev->asic = &r600_asic;
+		if (rdev->family == CHIP_R600)
+			rdev->has_uvd = false;
+		else
+			rdev->has_uvd = true;
 		break;
 	case CHIP_RS780:
 	case CHIP_RS880:
 		rdev->asic = &rs780_asic;
+		rdev->has_uvd = true;
 		break;
 	case CHIP_RV770:
 	case CHIP_RV730:
 	case CHIP_RV710:
 	case CHIP_RV740:
 		rdev->asic = &rv770_asic;
+		rdev->has_uvd = true;
 		break;
 	case CHIP_CEDAR:
 	case CHIP_REDWOOD:
@@ -2021,11 +2029,13 @@
 		else
 			rdev->num_crtc = 6;
 		rdev->asic = &evergreen_asic;
+		rdev->has_uvd = true;
 		break;
 	case CHIP_PALM:
 	case CHIP_SUMO:
 	case CHIP_SUMO2:
 		rdev->asic = &sumo_asic;
+		rdev->has_uvd = true;
 		break;
 	case CHIP_BARTS:
 	case CHIP_TURKS:
@@ -2036,27 +2046,37 @@
 		else
 			rdev->num_crtc = 6;
 		rdev->asic = &btc_asic;
+		rdev->has_uvd = true;
 		break;
 	case CHIP_CAYMAN:
 		rdev->asic = &cayman_asic;
 		/* set num crtcs */
 		rdev->num_crtc = 6;
+		rdev->has_uvd = true;
 		break;
 	case CHIP_ARUBA:
 		rdev->asic = &trinity_asic;
 		/* set num crtcs */
 		rdev->num_crtc = 4;
+		rdev->has_uvd = true;
 		break;
 	case CHIP_TAHITI:
 	case CHIP_PITCAIRN:
 	case CHIP_VERDE:
 	case CHIP_OLAND:
+	case CHIP_HAINAN:
 		rdev->asic = &si_asic;
 		/* set num crtcs */
-		if (rdev->family == CHIP_OLAND)
+		if (rdev->family == CHIP_HAINAN)
+			rdev->num_crtc = 0;
+		else if (rdev->family == CHIP_OLAND)
 			rdev->num_crtc = 2;
 		else
 			rdev->num_crtc = 6;
+		if (rdev->family == CHIP_HAINAN)
+			rdev->has_uvd = false;
+		else
+			rdev->has_uvd = true;
 		break;
 	default:
 		/* FIXME: not supported yet */
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index fa3c56f..061b227 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -244,24 +244,28 @@
 
 	/* enable the rom */
 	WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS));
-	/* Disable VGA mode */
-	WREG32(AVIVO_D1VGA_CONTROL,
-	       (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
-		AVIVO_DVGA_CONTROL_TIMING_SELECT)));
-	WREG32(AVIVO_D2VGA_CONTROL,
-	       (d2vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
-		AVIVO_DVGA_CONTROL_TIMING_SELECT)));
-	WREG32(AVIVO_VGA_RENDER_CONTROL,
-	       (vga_render_control & ~AVIVO_VGA_VSTATUS_CNTL_MASK));
+	if (!ASIC_IS_NODCE(rdev)) {
+		/* Disable VGA mode */
+		WREG32(AVIVO_D1VGA_CONTROL,
+		       (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
+					  AVIVO_DVGA_CONTROL_TIMING_SELECT)));
+		WREG32(AVIVO_D2VGA_CONTROL,
+		       (d2vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
+					  AVIVO_DVGA_CONTROL_TIMING_SELECT)));
+		WREG32(AVIVO_VGA_RENDER_CONTROL,
+		       (vga_render_control & ~AVIVO_VGA_VSTATUS_CNTL_MASK));
+	}
 	WREG32(R600_ROM_CNTL, rom_cntl | R600_SCK_OVERWRITE);
 
 	r = radeon_read_bios(rdev);
 
 	/* restore regs */
 	WREG32(R600_BUS_CNTL, bus_cntl);
-	WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
-	WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
-	WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
+	if (!ASIC_IS_NODCE(rdev)) {
+		WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
+		WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
+		WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
+	}
 	WREG32(R600_ROM_CNTL, rom_cntl);
 	return r;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index a8f6089..c2c59fb 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -94,6 +94,7 @@
 	"PITCAIRN",
 	"VERDE",
 	"OLAND",
+	"HAINAN",
 	"LAST",
 };
 
diff --git a/drivers/gpu/drm/radeon/radeon_family.h b/drivers/gpu/drm/radeon/radeon_family.h
index 2d91123..36e9803 100644
--- a/drivers/gpu/drm/radeon/radeon_family.h
+++ b/drivers/gpu/drm/radeon/radeon_family.h
@@ -92,6 +92,7 @@
 	CHIP_PITCAIRN,
 	CHIP_VERDE,
 	CHIP_OLAND,
+	CHIP_HAINAN,
 	CHIP_LAST,
 };
 
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index 6857cb4..7cb178a 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -1031,11 +1031,9 @@
 
 static void radeon_crtc_prepare(struct drm_crtc *crtc)
 {
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct drm_crtc *crtci;
 
-	radeon_crtc->in_mode_set = true;
 	/*
 	* The hardware wedges sometimes if you reconfigure one CRTC
 	* whilst another is running (see fdo bug #24611).
@@ -1046,7 +1044,6 @@
 
 static void radeon_crtc_commit(struct drm_crtc *crtc)
 {
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct drm_crtc *crtci;
 
@@ -1057,7 +1054,6 @@
 		if (crtci->enabled)
 			radeon_crtc_dpms(crtci, DRM_MODE_DPMS_ON);
 	}
-	radeon_crtc->in_mode_set = false;
 }
 
 static const struct drm_crtc_helper_funcs legacy_helper_funcs = {
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 44e579e..69ad4fe 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -302,7 +302,6 @@
 	u16 lut_r[256], lut_g[256], lut_b[256];
 	bool enabled;
 	bool can_tile;
-	bool in_mode_set;
 	uint32_t crtc_offset;
 	struct drm_gem_object *cursor_bo;
 	uint64_t cursor_addr;
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 93f760e..6c0ce89 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -726,7 +726,7 @@
 		return r;
 	}
 	DRM_INFO("radeon: %uM of VRAM memory ready\n",
-		 (unsigned)rdev->mc.real_vram_size / (1024 * 1024));
+		 (unsigned) (rdev->mc.real_vram_size / (1024 * 1024)));
 	r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_TT,
 				rdev->mc.gtt_size >> PAGE_SHIFT);
 	if (r) {
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index f0b6c2f..5ffade6 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -60,6 +60,11 @@
 MODULE_FIRMWARE("radeon/OLAND_ce.bin");
 MODULE_FIRMWARE("radeon/OLAND_mc.bin");
 MODULE_FIRMWARE("radeon/OLAND_rlc.bin");
+MODULE_FIRMWARE("radeon/HAINAN_pfp.bin");
+MODULE_FIRMWARE("radeon/HAINAN_me.bin");
+MODULE_FIRMWARE("radeon/HAINAN_ce.bin");
+MODULE_FIRMWARE("radeon/HAINAN_mc.bin");
+MODULE_FIRMWARE("radeon/HAINAN_rlc.bin");
 
 extern int r600_ih_ring_alloc(struct radeon_device *rdev);
 extern void r600_ih_ring_fini(struct radeon_device *rdev);
@@ -265,6 +270,40 @@
 	0x15c0, 0x000c0fc0, 0x000c0400
 };
 
+static const u32 hainan_golden_registers[] =
+{
+	0x9a10, 0x00010000, 0x00018208,
+	0x9830, 0xffffffff, 0x00000000,
+	0x9834, 0xf00fffff, 0x00000400,
+	0x9838, 0x0002021c, 0x00020200,
+	0xd0c0, 0xff000fff, 0x00000100,
+	0xd030, 0x000300c0, 0x00800040,
+	0xd8c0, 0xff000fff, 0x00000100,
+	0xd830, 0x000300c0, 0x00800040,
+	0x2ae4, 0x00073ffe, 0x000022a2,
+	0x240c, 0x000007ff, 0x00000000,
+	0x8a14, 0xf000001f, 0x00000007,
+	0x8b24, 0xffffffff, 0x00ffffff,
+	0x8b10, 0x0000ff0f, 0x00000000,
+	0x28a4c, 0x07ffffff, 0x4e000000,
+	0x28350, 0x3f3f3fff, 0x00000000,
+	0x30, 0x000000ff, 0x0040,
+	0x34, 0x00000040, 0x00004040,
+	0x9100, 0x03e00000, 0x03600000,
+	0x9060, 0x0000007f, 0x00000020,
+	0x9508, 0x00010000, 0x00010000,
+	0xac14, 0x000003ff, 0x000000f1,
+	0xac10, 0xffffffff, 0x00000000,
+	0xac0c, 0xffffffff, 0x00003210,
+	0x88d4, 0x0000001f, 0x00000010,
+	0x15c0, 0x000c0fc0, 0x000c0400
+};
+
+static const u32 hainan_golden_registers2[] =
+{
+	0x98f8, 0xffffffff, 0x02010001
+};
+
 static const u32 tahiti_mgcg_cgcg_init[] =
 {
 	0xc400, 0xffffffff, 0xfffffffc,
@@ -673,6 +712,83 @@
 	0xd8c0, 0xfffffff0, 0x00000100
 };
 
+static const u32 hainan_mgcg_cgcg_init[] =
+{
+	0xc400, 0xffffffff, 0xfffffffc,
+	0x802c, 0xffffffff, 0xe0000000,
+	0x9a60, 0xffffffff, 0x00000100,
+	0x92a4, 0xffffffff, 0x00000100,
+	0xc164, 0xffffffff, 0x00000100,
+	0x9774, 0xffffffff, 0x00000100,
+	0x8984, 0xffffffff, 0x06000100,
+	0x8a18, 0xffffffff, 0x00000100,
+	0x92a0, 0xffffffff, 0x00000100,
+	0xc380, 0xffffffff, 0x00000100,
+	0x8b28, 0xffffffff, 0x00000100,
+	0x9144, 0xffffffff, 0x00000100,
+	0x8d88, 0xffffffff, 0x00000100,
+	0x8d8c, 0xffffffff, 0x00000100,
+	0x9030, 0xffffffff, 0x00000100,
+	0x9034, 0xffffffff, 0x00000100,
+	0x9038, 0xffffffff, 0x00000100,
+	0x903c, 0xffffffff, 0x00000100,
+	0xad80, 0xffffffff, 0x00000100,
+	0xac54, 0xffffffff, 0x00000100,
+	0x897c, 0xffffffff, 0x06000100,
+	0x9868, 0xffffffff, 0x00000100,
+	0x9510, 0xffffffff, 0x00000100,
+	0xaf04, 0xffffffff, 0x00000100,
+	0xae04, 0xffffffff, 0x00000100,
+	0x949c, 0xffffffff, 0x00000100,
+	0x802c, 0xffffffff, 0xe0000000,
+	0x9160, 0xffffffff, 0x00010000,
+	0x9164, 0xffffffff, 0x00030002,
+	0x9168, 0xffffffff, 0x00040007,
+	0x916c, 0xffffffff, 0x00060005,
+	0x9170, 0xffffffff, 0x00090008,
+	0x9174, 0xffffffff, 0x00020001,
+	0x9178, 0xffffffff, 0x00040003,
+	0x917c, 0xffffffff, 0x00000007,
+	0x9180, 0xffffffff, 0x00060005,
+	0x9184, 0xffffffff, 0x00090008,
+	0x9188, 0xffffffff, 0x00030002,
+	0x918c, 0xffffffff, 0x00050004,
+	0x9190, 0xffffffff, 0x00000008,
+	0x9194, 0xffffffff, 0x00070006,
+	0x9198, 0xffffffff, 0x000a0009,
+	0x919c, 0xffffffff, 0x00040003,
+	0x91a0, 0xffffffff, 0x00060005,
+	0x91a4, 0xffffffff, 0x00000009,
+	0x91a8, 0xffffffff, 0x00080007,
+	0x91ac, 0xffffffff, 0x000b000a,
+	0x91b0, 0xffffffff, 0x00050004,
+	0x91b4, 0xffffffff, 0x00070006,
+	0x91b8, 0xffffffff, 0x0008000b,
+	0x91bc, 0xffffffff, 0x000a0009,
+	0x91c0, 0xffffffff, 0x000d000c,
+	0x91c4, 0xffffffff, 0x00060005,
+	0x91c8, 0xffffffff, 0x00080007,
+	0x91cc, 0xffffffff, 0x0000000b,
+	0x91d0, 0xffffffff, 0x000a0009,
+	0x91d4, 0xffffffff, 0x000d000c,
+	0x9150, 0xffffffff, 0x96940200,
+	0x8708, 0xffffffff, 0x00900100,
+	0xc478, 0xffffffff, 0x00000080,
+	0xc404, 0xffffffff, 0x0020003f,
+	0x30, 0xffffffff, 0x0000001c,
+	0x34, 0x000f0000, 0x000f0000,
+	0x160c, 0xffffffff, 0x00000100,
+	0x1024, 0xffffffff, 0x00000100,
+	0x20a8, 0xffffffff, 0x00000104,
+	0x264c, 0x000c0000, 0x000c0000,
+	0x2648, 0x000c0000, 0x000c0000,
+	0x2f50, 0x00000001, 0x00000001,
+	0x30cc, 0xc0000fff, 0x00000104,
+	0xc1e4, 0x00000001, 0x00000001,
+	0xd0c0, 0xfffffff0, 0x00000100,
+	0xd8c0, 0xfffffff0, 0x00000100
+};
+
 static u32 verde_pg_init[] =
 {
 	0x353c, 0xffffffff, 0x40000,
@@ -853,6 +969,17 @@
 						 oland_mgcg_cgcg_init,
 						 (const u32)ARRAY_SIZE(oland_mgcg_cgcg_init));
 		break;
+	case CHIP_HAINAN:
+		radeon_program_register_sequence(rdev,
+						 hainan_golden_registers,
+						 (const u32)ARRAY_SIZE(hainan_golden_registers));
+		radeon_program_register_sequence(rdev,
+						 hainan_golden_registers2,
+						 (const u32)ARRAY_SIZE(hainan_golden_registers2));
+		radeon_program_register_sequence(rdev,
+						 hainan_mgcg_cgcg_init,
+						 (const u32)ARRAY_SIZE(hainan_mgcg_cgcg_init));
+		break;
 	default:
 		break;
 	}
@@ -1062,6 +1189,45 @@
 	{0x0000009f, 0x00a17730}
 };
 
+static const u32 hainan_io_mc_regs[TAHITI_IO_MC_REGS_SIZE][2] = {
+	{0x0000006f, 0x03044000},
+	{0x00000070, 0x0480c018},
+	{0x00000071, 0x00000040},
+	{0x00000072, 0x01000000},
+	{0x00000074, 0x000000ff},
+	{0x00000075, 0x00143400},
+	{0x00000076, 0x08ec0800},
+	{0x00000077, 0x040000cc},
+	{0x00000079, 0x00000000},
+	{0x0000007a, 0x21000409},
+	{0x0000007c, 0x00000000},
+	{0x0000007d, 0xe8000000},
+	{0x0000007e, 0x044408a8},
+	{0x0000007f, 0x00000003},
+	{0x00000080, 0x00000000},
+	{0x00000081, 0x01000000},
+	{0x00000082, 0x02000000},
+	{0x00000083, 0x00000000},
+	{0x00000084, 0xe3f3e4f4},
+	{0x00000085, 0x00052024},
+	{0x00000087, 0x00000000},
+	{0x00000088, 0x66036603},
+	{0x00000089, 0x01000000},
+	{0x0000008b, 0x1c0a0000},
+	{0x0000008c, 0xff010000},
+	{0x0000008e, 0xffffefff},
+	{0x0000008f, 0xfff3efff},
+	{0x00000090, 0xfff3efbf},
+	{0x00000094, 0x00101101},
+	{0x00000095, 0x00000fff},
+	{0x00000096, 0x00116fff},
+	{0x00000097, 0x60010000},
+	{0x00000098, 0x10010000},
+	{0x00000099, 0x00006000},
+	{0x0000009a, 0x00001000},
+	{0x0000009f, 0x00a07730}
+};
+
 /* ucode loading */
 static int si_mc_load_microcode(struct radeon_device *rdev)
 {
@@ -1095,6 +1261,11 @@
 		ucode_size = OLAND_MC_UCODE_SIZE;
 		regs_size = TAHITI_IO_MC_REGS_SIZE;
 		break;
+	case CHIP_HAINAN:
+		io_mc_regs = (u32 *)&hainan_io_mc_regs;
+		ucode_size = OLAND_MC_UCODE_SIZE;
+		regs_size = TAHITI_IO_MC_REGS_SIZE;
+		break;
 	}
 
 	running = RREG32(MC_SEQ_SUP_CNTL) & RUN_MASK;
@@ -1198,6 +1369,15 @@
 		rlc_req_size = SI_RLC_UCODE_SIZE * 4;
 		mc_req_size = OLAND_MC_UCODE_SIZE * 4;
 		break;
+	case CHIP_HAINAN:
+		chip_name = "HAINAN";
+		rlc_chip_name = "HAINAN";
+		pfp_req_size = SI_PFP_UCODE_SIZE * 4;
+		me_req_size = SI_PM4_UCODE_SIZE * 4;
+		ce_req_size = SI_CE_UCODE_SIZE * 4;
+		rlc_req_size = SI_RLC_UCODE_SIZE * 4;
+		mc_req_size = OLAND_MC_UCODE_SIZE * 4;
+		break;
 	default: BUG();
 	}
 
@@ -2003,7 +2183,8 @@
 			WREG32(GB_TILE_MODE0 + (reg_offset * 4), gb_tile_moden);
 		}
 	} else if ((rdev->family == CHIP_VERDE) ||
-		   (rdev->family == CHIP_OLAND)) {
+		   (rdev->family == CHIP_OLAND) ||
+		   (rdev->family == CHIP_HAINAN)) {
 		for (reg_offset = 0; reg_offset < num_tile_mode_states; reg_offset++) {
 			switch (reg_offset) {
 			case 0:  /* non-AA compressed depth or any compressed stencil */
@@ -2466,6 +2647,23 @@
 		rdev->config.si.sc_earlyz_tile_fifo_size = 0x130;
 		gb_addr_config = VERDE_GB_ADDR_CONFIG_GOLDEN;
 		break;
+	case CHIP_HAINAN:
+		rdev->config.si.max_shader_engines = 1;
+		rdev->config.si.max_tile_pipes = 4;
+		rdev->config.si.max_cu_per_sh = 5;
+		rdev->config.si.max_sh_per_se = 1;
+		rdev->config.si.max_backends_per_se = 1;
+		rdev->config.si.max_texture_channel_caches = 2;
+		rdev->config.si.max_gprs = 256;
+		rdev->config.si.max_gs_threads = 16;
+		rdev->config.si.max_hw_contexts = 8;
+
+		rdev->config.si.sc_prim_fifo_size_frontend = 0x20;
+		rdev->config.si.sc_prim_fifo_size_backend = 0x40;
+		rdev->config.si.sc_hiz_tile_fifo_size = 0x30;
+		rdev->config.si.sc_earlyz_tile_fifo_size = 0x130;
+		gb_addr_config = HAINAN_GB_ADDR_CONFIG_GOLDEN;
+		break;
 	}
 
 	/* Initialize HDP */
@@ -2559,9 +2757,11 @@
 	WREG32(HDP_ADDR_CONFIG, gb_addr_config);
 	WREG32(DMA_TILING_CONFIG + DMA0_REGISTER_OFFSET, gb_addr_config);
 	WREG32(DMA_TILING_CONFIG + DMA1_REGISTER_OFFSET, gb_addr_config);
-	WREG32(UVD_UDEC_ADDR_CONFIG, gb_addr_config);
-	WREG32(UVD_UDEC_DB_ADDR_CONFIG, gb_addr_config);
-	WREG32(UVD_UDEC_DBW_ADDR_CONFIG, gb_addr_config);
+	if (rdev->has_uvd) {
+		WREG32(UVD_UDEC_ADDR_CONFIG, gb_addr_config);
+		WREG32(UVD_UDEC_DB_ADDR_CONFIG, gb_addr_config);
+		WREG32(UVD_UDEC_DBW_ADDR_CONFIG, gb_addr_config);
+	}
 
 	si_tiling_mode_table_init(rdev);
 
@@ -3304,8 +3504,9 @@
 	if (radeon_mc_wait_for_idle(rdev)) {
 		dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
 	}
-	/* Lockout access through VGA aperture*/
-	WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE);
+	if (!ASIC_IS_NODCE(rdev))
+		/* Lockout access through VGA aperture*/
+		WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE);
 	/* Update configuration */
 	WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR,
 	       rdev->mc.vram_start >> 12);
@@ -3327,9 +3528,11 @@
 		dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
 	}
 	evergreen_mc_resume(rdev, &save);
-	/* we need to own VRAM, so turn off the VGA renderer here
-	 * to stop it overwriting our objects */
-	rv515_vga_render_disable(rdev);
+	if (!ASIC_IS_NODCE(rdev)) {
+		/* we need to own VRAM, so turn off the VGA renderer here
+		 * to stop it overwriting our objects */
+		rv515_vga_render_disable(rdev);
+	}
 }
 
 static void si_vram_gtt_location(struct radeon_device *rdev,
@@ -3397,8 +3600,8 @@
 	rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
 	rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
 	/* size in MB on si */
-	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
-	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
+	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL;
+	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL;
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
 	si_vram_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
@@ -4251,8 +4454,10 @@
 	tmp = RREG32(DMA_CNTL + DMA1_REGISTER_OFFSET) & ~TRAP_ENABLE;
 	WREG32(DMA_CNTL + DMA1_REGISTER_OFFSET, tmp);
 	WREG32(GRBM_INT_CNTL, 0);
-	WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
-	WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
+	if (rdev->num_crtc >= 2) {
+		WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
+		WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
+	}
 	if (rdev->num_crtc >= 4) {
 		WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
 		WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
@@ -4262,8 +4467,10 @@
 		WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
 	}
 
-	WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
-	WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
+	if (rdev->num_crtc >= 2) {
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
+	}
 	if (rdev->num_crtc >= 4) {
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
@@ -4273,21 +4480,22 @@
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
 	}
 
-	WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
+	if (!ASIC_IS_NODCE(rdev)) {
+		WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
 
-	tmp = RREG32(DC_HPD1_INT_CONTROL) & DC_HPDx_INT_POLARITY;
-	WREG32(DC_HPD1_INT_CONTROL, tmp);
-	tmp = RREG32(DC_HPD2_INT_CONTROL) & DC_HPDx_INT_POLARITY;
-	WREG32(DC_HPD2_INT_CONTROL, tmp);
-	tmp = RREG32(DC_HPD3_INT_CONTROL) & DC_HPDx_INT_POLARITY;
-	WREG32(DC_HPD3_INT_CONTROL, tmp);
-	tmp = RREG32(DC_HPD4_INT_CONTROL) & DC_HPDx_INT_POLARITY;
-	WREG32(DC_HPD4_INT_CONTROL, tmp);
-	tmp = RREG32(DC_HPD5_INT_CONTROL) & DC_HPDx_INT_POLARITY;
-	WREG32(DC_HPD5_INT_CONTROL, tmp);
-	tmp = RREG32(DC_HPD6_INT_CONTROL) & DC_HPDx_INT_POLARITY;
-	WREG32(DC_HPD6_INT_CONTROL, tmp);
-
+		tmp = RREG32(DC_HPD1_INT_CONTROL) & DC_HPDx_INT_POLARITY;
+		WREG32(DC_HPD1_INT_CONTROL, tmp);
+		tmp = RREG32(DC_HPD2_INT_CONTROL) & DC_HPDx_INT_POLARITY;
+		WREG32(DC_HPD2_INT_CONTROL, tmp);
+		tmp = RREG32(DC_HPD3_INT_CONTROL) & DC_HPDx_INT_POLARITY;
+		WREG32(DC_HPD3_INT_CONTROL, tmp);
+		tmp = RREG32(DC_HPD4_INT_CONTROL) & DC_HPDx_INT_POLARITY;
+		WREG32(DC_HPD4_INT_CONTROL, tmp);
+		tmp = RREG32(DC_HPD5_INT_CONTROL) & DC_HPDx_INT_POLARITY;
+		WREG32(DC_HPD5_INT_CONTROL, tmp);
+		tmp = RREG32(DC_HPD6_INT_CONTROL) & DC_HPDx_INT_POLARITY;
+		WREG32(DC_HPD6_INT_CONTROL, tmp);
+	}
 }
 
 static int si_irq_init(struct radeon_device *rdev)
@@ -4366,7 +4574,7 @@
 	u32 cp_int_cntl = CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE;
 	u32 cp_int_cntl1 = 0, cp_int_cntl2 = 0;
 	u32 crtc1 = 0, crtc2 = 0, crtc3 = 0, crtc4 = 0, crtc5 = 0, crtc6 = 0;
-	u32 hpd1, hpd2, hpd3, hpd4, hpd5, hpd6;
+	u32 hpd1 = 0, hpd2 = 0, hpd3 = 0, hpd4 = 0, hpd5 = 0, hpd6 = 0;
 	u32 grbm_int_cntl = 0;
 	u32 grph1 = 0, grph2 = 0, grph3 = 0, grph4 = 0, grph5 = 0, grph6 = 0;
 	u32 dma_cntl, dma_cntl1;
@@ -4383,12 +4591,14 @@
 		return 0;
 	}
 
-	hpd1 = RREG32(DC_HPD1_INT_CONTROL) & ~DC_HPDx_INT_EN;
-	hpd2 = RREG32(DC_HPD2_INT_CONTROL) & ~DC_HPDx_INT_EN;
-	hpd3 = RREG32(DC_HPD3_INT_CONTROL) & ~DC_HPDx_INT_EN;
-	hpd4 = RREG32(DC_HPD4_INT_CONTROL) & ~DC_HPDx_INT_EN;
-	hpd5 = RREG32(DC_HPD5_INT_CONTROL) & ~DC_HPDx_INT_EN;
-	hpd6 = RREG32(DC_HPD6_INT_CONTROL) & ~DC_HPDx_INT_EN;
+	if (!ASIC_IS_NODCE(rdev)) {
+		hpd1 = RREG32(DC_HPD1_INT_CONTROL) & ~DC_HPDx_INT_EN;
+		hpd2 = RREG32(DC_HPD2_INT_CONTROL) & ~DC_HPDx_INT_EN;
+		hpd3 = RREG32(DC_HPD3_INT_CONTROL) & ~DC_HPDx_INT_EN;
+		hpd4 = RREG32(DC_HPD4_INT_CONTROL) & ~DC_HPDx_INT_EN;
+		hpd5 = RREG32(DC_HPD5_INT_CONTROL) & ~DC_HPDx_INT_EN;
+		hpd6 = RREG32(DC_HPD6_INT_CONTROL) & ~DC_HPDx_INT_EN;
+	}
 
 	dma_cntl = RREG32(DMA_CNTL + DMA0_REGISTER_OFFSET) & ~TRAP_ENABLE;
 	dma_cntl1 = RREG32(DMA_CNTL + DMA1_REGISTER_OFFSET) & ~TRAP_ENABLE;
@@ -4479,8 +4689,10 @@
 
 	WREG32(GRBM_INT_CNTL, grbm_int_cntl);
 
-	WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1);
-	WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2);
+	if (rdev->num_crtc >= 2) {
+		WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1);
+		WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2);
+	}
 	if (rdev->num_crtc >= 4) {
 		WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, crtc3);
 		WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, crtc4);
@@ -4490,8 +4702,10 @@
 		WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6);
 	}
 
-	WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1);
-	WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2);
+	if (rdev->num_crtc >= 2) {
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2);
+	}
 	if (rdev->num_crtc >= 4) {
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3);
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4);
@@ -4501,12 +4715,14 @@
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6);
 	}
 
-	WREG32(DC_HPD1_INT_CONTROL, hpd1);
-	WREG32(DC_HPD2_INT_CONTROL, hpd2);
-	WREG32(DC_HPD3_INT_CONTROL, hpd3);
-	WREG32(DC_HPD4_INT_CONTROL, hpd4);
-	WREG32(DC_HPD5_INT_CONTROL, hpd5);
-	WREG32(DC_HPD6_INT_CONTROL, hpd6);
+	if (!ASIC_IS_NODCE(rdev)) {
+		WREG32(DC_HPD1_INT_CONTROL, hpd1);
+		WREG32(DC_HPD2_INT_CONTROL, hpd2);
+		WREG32(DC_HPD3_INT_CONTROL, hpd3);
+		WREG32(DC_HPD4_INT_CONTROL, hpd4);
+		WREG32(DC_HPD5_INT_CONTROL, hpd5);
+		WREG32(DC_HPD6_INT_CONTROL, hpd6);
+	}
 
 	return 0;
 }
@@ -4515,6 +4731,9 @@
 {
 	u32 tmp;
 
+	if (ASIC_IS_NODCE(rdev))
+		return;
+
 	rdev->irq.stat_regs.evergreen.disp_int = RREG32(DISP_INTERRUPT_STATUS);
 	rdev->irq.stat_regs.evergreen.disp_int_cont = RREG32(DISP_INTERRUPT_STATUS_CONTINUE);
 	rdev->irq.stat_regs.evergreen.disp_int_cont2 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE2);
@@ -5118,15 +5337,17 @@
 		return r;
 	}
 
-	r = rv770_uvd_resume(rdev);
-	if (!r) {
-		r = radeon_fence_driver_start_ring(rdev,
-						   R600_RING_TYPE_UVD_INDEX);
+	if (rdev->has_uvd) {
+		r = rv770_uvd_resume(rdev);
+		if (!r) {
+			r = radeon_fence_driver_start_ring(rdev,
+							   R600_RING_TYPE_UVD_INDEX);
+			if (r)
+				dev_err(rdev->dev, "UVD fences init error (%d).\n", r);
+		}
 		if (r)
-			dev_err(rdev->dev, "UVD fences init error (%d).\n", r);
+			rdev->ring[R600_RING_TYPE_UVD_INDEX].ring_size = 0;
 	}
-	if (r)
-		rdev->ring[R600_RING_TYPE_UVD_INDEX].ring_size = 0;
 
 	/* Enable IRQ */
 	r = si_irq_init(rdev);
@@ -5185,16 +5406,18 @@
 	if (r)
 		return r;
 
-	ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
-	if (ring->ring_size) {
-		r = radeon_ring_init(rdev, ring, ring->ring_size,
-				     R600_WB_UVD_RPTR_OFFSET,
-				     UVD_RBC_RB_RPTR, UVD_RBC_RB_WPTR,
-				     0, 0xfffff, RADEON_CP_PACKET2);
-		if (!r)
-			r = r600_uvd_init(rdev);
-		if (r)
-			DRM_ERROR("radeon: failed initializing UVD (%d).\n", r);
+	if (rdev->has_uvd) {
+		ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
+		if (ring->ring_size) {
+			r = radeon_ring_init(rdev, ring, ring->ring_size,
+					     R600_WB_UVD_RPTR_OFFSET,
+					     UVD_RBC_RB_RPTR, UVD_RBC_RB_WPTR,
+					     0, 0xfffff, RADEON_CP_PACKET2);
+			if (!r)
+				r = r600_uvd_init(rdev);
+			if (r)
+				DRM_ERROR("radeon: failed initializing UVD (%d).\n", r);
+		}
 	}
 
 	r = radeon_ib_pool_init(rdev);
@@ -5243,8 +5466,10 @@
 	radeon_vm_manager_fini(rdev);
 	si_cp_enable(rdev, false);
 	cayman_dma_stop(rdev);
-	r600_uvd_rbc_stop(rdev);
-	radeon_uvd_suspend(rdev);
+	if (rdev->has_uvd) {
+		r600_uvd_rbc_stop(rdev);
+		radeon_uvd_suspend(rdev);
+	}
 	si_irq_suspend(rdev);
 	radeon_wb_disable(rdev);
 	si_pcie_gart_disable(rdev);
@@ -5332,11 +5557,13 @@
 	ring->ring_obj = NULL;
 	r600_ring_init(rdev, ring, 64 * 1024);
 
-	r = radeon_uvd_init(rdev);
-	if (!r) {
-		ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
-		ring->ring_obj = NULL;
-		r600_ring_init(rdev, ring, 4096);
+	if (rdev->has_uvd) {
+		r = radeon_uvd_init(rdev);
+		if (!r) {
+			ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
+			ring->ring_obj = NULL;
+			r600_ring_init(rdev, ring, 4096);
+		}
 	}
 
 	rdev->ih.ring_obj = NULL;
@@ -5384,7 +5611,8 @@
 	radeon_vm_manager_fini(rdev);
 	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
-	radeon_uvd_fini(rdev);
+	if (rdev->has_uvd)
+		radeon_uvd_fini(rdev);
 	si_pcie_gart_fini(rdev);
 	r600_vram_scratch_fini(rdev);
 	radeon_gem_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h
index 222877b..8f2d7d4 100644
--- a/drivers/gpu/drm/radeon/sid.h
+++ b/drivers/gpu/drm/radeon/sid.h
@@ -28,6 +28,7 @@
 
 #define TAHITI_GB_ADDR_CONFIG_GOLDEN        0x12011003
 #define VERDE_GB_ADDR_CONFIG_GOLDEN         0x12010002
+#define HAINAN_GB_ADDR_CONFIG_GOLDEN        0x02010001
 
 /* discrete uvd clocks */
 #define	CG_UPLL_FUNC_CNTL				0x634
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index bad8128..21ef689 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -329,7 +329,7 @@
 		return 0;
 	}
 	cur_cpu = (++next_vp % max_cpus);
-	return cur_cpu;
+	return hv_context.vp_index[cur_cpu];
 }
 
 /*
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 21fbb34..c41ca63 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -383,7 +383,8 @@
 	/* Enable the adapter */
 	__i2c_dw_enable(dev, true);
 
-	/* Enable interrupts */
+	/* Clear and enable interrupts */
+	i2c_dw_clear_int(dev);
 	dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
 }
 
@@ -448,8 +449,14 @@
 				cmd |= BIT(9);
 
 			if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
+
+				/* avoid rx buffer overrun */
+				if (rx_limit - dev->rx_outstanding <= 0)
+					break;
+
 				dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD);
 				rx_limit--;
+				dev->rx_outstanding++;
 			} else
 				dw_writel(dev, cmd | *buf++, DW_IC_DATA_CMD);
 			tx_limit--; buf_len--;
@@ -502,8 +509,10 @@
 
 		rx_valid = dw_readl(dev, DW_IC_RXFLR);
 
-		for (; len > 0 && rx_valid > 0; len--, rx_valid--)
+		for (; len > 0 && rx_valid > 0; len--, rx_valid--) {
 			*buf++ = dw_readl(dev, DW_IC_DATA_CMD);
+			dev->rx_outstanding--;
+		}
 
 		if (len > 0) {
 			dev->status |= STATUS_READ_IN_PROGRESS;
@@ -561,6 +570,7 @@
 	dev->msg_err = 0;
 	dev->status = STATUS_IDLE;
 	dev->abort_source = 0;
+	dev->rx_outstanding = 0;
 
 	ret = i2c_dw_wait_bus_not_busy(dev);
 	if (ret < 0)
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 9c1840e..e761ad1 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -60,6 +60,7 @@
  * @adapter: i2c subsystem adapter node
  * @tx_fifo_depth: depth of the hardware tx fifo
  * @rx_fifo_depth: depth of the hardware rx fifo
+ * @rx_outstanding: current master-rx elements in tx fifo
  */
 struct dw_i2c_dev {
 	struct device		*dev;
@@ -88,6 +89,7 @@
 	u32			master_cfg;
 	unsigned int		tx_fifo_depth;
 	unsigned int		rx_fifo_depth;
+	int			rx_outstanding;
 };
 
 #define ACCESS_SWAP		0x00000001
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 8ec9133..35b70a1 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -69,6 +69,7 @@
 static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "INT33C2", 0 },
 	{ "INT33C3", 0 },
+	{ "80860F41", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index e1cf2e0..3a6903f 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -231,7 +231,11 @@
 
 static unsigned int disable_features;
 module_param(disable_features, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(disable_features, "Disable selected driver features");
+MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
+	"\t\t  0x01  disable SMBus PEC\n"
+	"\t\t  0x02  disable the block buffer\n"
+	"\t\t  0x08  disable the I2C block read functionality\n"
+	"\t\t  0x10  don't use interrupts ");
 
 /* Make sure the SMBus host is ready to start transmitting.
    Return 0 if it is, -EBUSY if it is not. */
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 3bbd65d..1a3abd6 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -252,7 +252,7 @@
 		writel(drv_data->cntl_bits,
 			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
 		drv_data->block = 0;
-		wake_up_interruptible(&drv_data->waitq);
+		wake_up(&drv_data->waitq);
 		break;
 
 	case MV64XXX_I2C_ACTION_CONTINUE:
@@ -300,7 +300,7 @@
 		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
 			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
 		drv_data->block = 0;
-		wake_up_interruptible(&drv_data->waitq);
+		wake_up(&drv_data->waitq);
 		break;
 
 	case MV64XXX_I2C_ACTION_INVALID:
@@ -315,7 +315,7 @@
 		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
 			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
 		drv_data->block = 0;
-		wake_up_interruptible(&drv_data->waitq);
+		wake_up(&drv_data->waitq);
 		break;
 	}
 }
@@ -381,7 +381,7 @@
 	unsigned long	flags;
 	char		abort = 0;
 
-	time_left = wait_event_interruptible_timeout(drv_data->waitq,
+	time_left = wait_event_timeout(drv_data->waitq,
 		!drv_data->block, drv_data->adapter.timeout);
 
 	spin_lock_irqsave(&drv_data->lock, flags);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 6b63cc7..48e31ed 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -892,7 +892,8 @@
 }
 
 static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device);
-static DEVICE_ATTR(delete_device, S_IWUSR, NULL, i2c_sysfs_delete_device);
+static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL,
+				   i2c_sysfs_delete_device);
 
 static struct attribute *i2c_adapter_attrs[] = {
 	&dev_attr_name.attr,
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 9f3a8ef..b3d03d3 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -390,8 +390,8 @@
 #ifdef CONFIG_PM_SLEEP
 static int exynos_adc_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct exynos_adc *info = platform_get_drvdata(pdev);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct exynos_adc *info = iio_priv(indio_dev);
 	u32 con;
 
 	if (info->version == ADC_V2) {
@@ -413,8 +413,8 @@
 
 static int exynos_adc_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct exynos_adc *info = platform_get_drvdata(pdev);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct exynos_adc *info = iio_priv(indio_dev);
 	int ret;
 
 	ret = regulator_enable(info->vdd);
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index bd33473..ed9bc8a 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -312,6 +312,8 @@
 			goto read_error;
 
 		*val = *val >> ch->scan_type.shift;
+
+		err = st_sensors_set_enable(indio_dev, false);
 	}
 	mutex_unlock(&indio_dev->mlock);
 
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index f4a6f08..b61160b 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -5,7 +5,7 @@
 
 config AD5064
 	tristate "Analog Devices AD5064 and similar multi-channel DAC driver"
-	depends on (SPI_MASTER || I2C)
+	depends on (SPI_MASTER && I2C!=m) || I2C
 	help
 	  Say yes here to build support for Analog Devices AD5024, AD5025, AD5044,
 	  AD5045, AD5064, AD5064-1, AD5065, AD5628, AD5629R, AD5648, AD5666, AD5668,
@@ -27,7 +27,7 @@
 
 config AD5380
 	tristate "Analog Devices AD5380/81/82/83/84/90/91/92 DAC driver"
-	depends on (SPI_MASTER || I2C)
+	depends on (SPI_MASTER && I2C!=m) || I2C
 	select REGMAP_I2C if I2C
 	select REGMAP_SPI if SPI_MASTER
 	help
@@ -57,7 +57,7 @@
 
 config AD5446
 	tristate "Analog Devices AD5446 and similar single channel DACs driver"
-	depends on (SPI_MASTER || I2C)
+	depends on (SPI_MASTER && I2C!=m) || I2C
 	help
 	  Say yes here to build support for Analog Devices AD5300, AD5301, AD5310,
 	  AD5311, AD5320, AD5321, AD5444, AD5446, AD5450, AD5451, AD5452, AD5453,
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 0bfd8cf..5c68e44 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -342,10 +342,10 @@
 		wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) |
 			((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12);
 
-		switch (wacom->id[idx] & 0xfffff) {
+		switch (wacom->id[idx]) {
 		case 0x812: /* Inking pen */
 		case 0x801: /* Intuos3 Inking pen */
-		case 0x20802: /* Intuos4 Inking Pen */
+		case 0x120802: /* Intuos4/5 Inking Pen */
 		case 0x012:
 			wacom->tool[idx] = BTN_TOOL_PENCIL;
 			break;
@@ -356,11 +356,13 @@
 		case 0x823: /* Intuos3 Grip Pen */
 		case 0x813: /* Intuos3 Classic Pen */
 		case 0x885: /* Intuos3 Marker Pen */
-		case 0x802: /* Intuos4 General Pen */
-		case 0x804: /* Intuos4 Marker Pen */
-		case 0x40802: /* Intuos4 Classic Pen */
-		case 0x18802: /* DTH2242 Grip Pen */
+		case 0x802: /* Intuos4/5 13HD/24HD General Pen */
+		case 0x804: /* Intuos4/5 13HD/24HD Marker Pen */
 		case 0x022:
+		case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */
+		case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */
+		case 0x160802: /* Cintiq 13HD Pro Pen */
+		case 0x180802: /* DTH2242 Pen */
 			wacom->tool[idx] = BTN_TOOL_PEN;
 			break;
 
@@ -391,10 +393,14 @@
 		case 0x82b: /* Intuos3 Grip Pen Eraser */
 		case 0x81b: /* Intuos3 Classic Pen Eraser */
 		case 0x91b: /* Intuos3 Airbrush Eraser */
-		case 0x80c: /* Intuos4 Marker Pen Eraser */
-		case 0x80a: /* Intuos4 General Pen Eraser */
-		case 0x4080a: /* Intuos4 Classic Pen Eraser */
-		case 0x90a: /* Intuos4 Airbrush Eraser */
+		case 0x80c: /* Intuos4/5 13HD/24HD Marker Pen Eraser */
+		case 0x80a: /* Intuos4/5 13HD/24HD General Pen Eraser */
+		case 0x90a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
+		case 0x14080a: /* Intuos4/5 13HD/24HD Classic Pen Eraser */
+		case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
+		case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */
+		case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */
+		case 0x18080a: /* DTH2242 Eraser */
 			wacom->tool[idx] = BTN_TOOL_RUBBER;
 			break;
 
@@ -402,7 +408,8 @@
 		case 0x912:
 		case 0x112:
 		case 0x913: /* Intuos3 Airbrush */
-		case 0x902: /* Intuos4 Airbrush */
+		case 0x902: /* Intuos4/5 13HD/24HD Airbrush */
+		case 0x100902: /* Intuos4/5 13HD/24HD Airbrush */
 			wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
 			break;
 
@@ -533,10 +540,8 @@
 				input_report_key(input, BTN_8, (data[3] & 0x80));
 			}
 			if (data[1] | (data[2] & 0x01) | data[3]) {
-				input_report_key(input, wacom->tool[1], 1);
 				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
 			} else {
-				input_report_key(input, wacom->tool[1], 0);
 				input_report_abs(input, ABS_MISC, 0);
 			}
 		} else if (features->type == DTK) {
@@ -546,6 +551,26 @@
 			input_report_key(input, BTN_3, (data[6] & 0x08));
 			input_report_key(input, BTN_4, (data[6] & 0x10));
 			input_report_key(input, BTN_5, (data[6] & 0x20));
+			if (data[6] & 0x3f) {
+				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+			} else {
+				input_report_abs(input, ABS_MISC, 0);
+			}
+		} else if (features->type == WACOM_13HD) {
+			input_report_key(input, BTN_0, (data[3] & 0x01));
+			input_report_key(input, BTN_1, (data[4] & 0x01));
+			input_report_key(input, BTN_2, (data[4] & 0x02));
+			input_report_key(input, BTN_3, (data[4] & 0x04));
+			input_report_key(input, BTN_4, (data[4] & 0x08));
+			input_report_key(input, BTN_5, (data[4] & 0x10));
+			input_report_key(input, BTN_6, (data[4] & 0x20));
+			input_report_key(input, BTN_7, (data[4] & 0x40));
+			input_report_key(input, BTN_8, (data[4] & 0x80));
+			if ((data[3] & 0x01) | data[4]) {
+				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+			} else {
+				input_report_abs(input, ABS_MISC, 0);
+			}
 		} else if (features->type == WACOM_24HD) {
 			input_report_key(input, BTN_0, (data[6] & 0x01));
 			input_report_key(input, BTN_1, (data[6] & 0x02));
@@ -590,10 +615,8 @@
 			}
 
 			if (data[1] | data[2] | (data[3] & 0x1f) | data[4] | data[6] | data[8]) {
-				input_report_key(input, wacom->tool[1], 1);
 				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
 			} else {
-				input_report_key(input, wacom->tool[1], 0);
 				input_report_abs(input, ABS_MISC, 0);
 			}
 		} else if (features->type >= INTUOS5S && features->type <= INTUOS5L) {
@@ -618,10 +641,8 @@
 			}
 
 			if (data[2] | (data[3] & 0x01) | data[4] | data[5]) {
-				input_report_key(input, wacom->tool[1], 1);
 				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
 			} else {
-				input_report_key(input, wacom->tool[1], 0);
 				input_report_abs(input, ABS_MISC, 0);
 			}
 		} else {
@@ -668,10 +689,8 @@
 			if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) |
 				data[2] | (data[3] & 0x1f) | data[4] | data[8] |
 				(data[7] & 0x01)) {
-				input_report_key(input, wacom->tool[1], 1);
 				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
 			} else {
-				input_report_key(input, wacom->tool[1], 0);
 				input_report_abs(input, ABS_MISC, 0);
 			}
 		}
@@ -1301,6 +1320,7 @@
 	case INTUOS4L:
 	case CINTIQ:
 	case WACOM_BEE:
+	case WACOM_13HD:
 	case WACOM_21UX2:
 	case WACOM_22HD:
 	case WACOM_24HD:
@@ -1530,15 +1550,15 @@
 		__set_bit(KEY_PROG1, input_dev->keybit);
 		__set_bit(KEY_PROG2, input_dev->keybit);
 		__set_bit(KEY_PROG3, input_dev->keybit);
+
+		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+		input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
 		/* fall through */
 
 	case DTK:
 		for (i = 0; i < 6; i++)
 			__set_bit(BTN_0 + i, input_dev->keybit);
 
-		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
-		input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
-
 		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
 
 		wacom_setup_cintiq(wacom_wac);
@@ -1579,6 +1599,15 @@
 		wacom_setup_cintiq(wacom_wac);
 		break;
 
+	case WACOM_13HD:
+		for (i = 0; i < 9; i++)
+			__set_bit(BTN_0 + i, input_dev->keybit);
+
+		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+		wacom_setup_cintiq(wacom_wac);
+		break;
+
 	case INTUOS3:
 	case INTUOS3L:
 		__set_bit(BTN_4, input_dev->keybit);
@@ -1950,6 +1979,9 @@
 static const struct wacom_features wacom_features_0xC6 =
 	{ "Wacom Cintiq 12WX",    WACOM_PKGLEN_INTUOS,    53020, 33440, 1023,
 	  63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x304 =
+	{ "Wacom Cintiq 13HD",    WACOM_PKGLEN_INTUOS,    59552, 33848, 1023,
+	  63, WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xC7 =
 	{ "Wacom DTU1931",        WACOM_PKGLEN_GRAPHIRE,  37832, 30305,  511,
 	  0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1959,6 +1991,9 @@
 static const struct wacom_features wacom_features_0xF0 =
 	{ "Wacom DTU1631",        WACOM_PKGLEN_GRAPHIRE,  34623, 19553,  511,
 	  0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x57 =
+	{ "Wacom DTK2241",        WACOM_PKGLEN_INTUOS,    95840, 54260, 2047,
+	  63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES};
 static const struct wacom_features wacom_features_0x59 = /* Pen */
 	{ "Wacom DTH2242",        WACOM_PKGLEN_INTUOS,    95840, 54260, 2047,
 	  63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
@@ -1972,6 +2007,12 @@
 static const struct wacom_features wacom_features_0xFA =
 	{ "Wacom Cintiq 22HD",    WACOM_PKGLEN_INTUOS,    95840, 54260, 2047,
 	  63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x5B =
+	{ "Wacom Cintiq 22HDT", WACOM_PKGLEN_INTUOS,      95840, 54260, 2047,
+	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e };
+static const struct wacom_features wacom_features_0x5E =
+	{ "Wacom Cintiq 22HDT", .type = WACOM_24HDT,
+	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10 };
 static const struct wacom_features wacom_features_0x90 =
 	{ "Wacom ISDv4 90",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
 	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -2143,8 +2184,11 @@
 	{ USB_DEVICE_WACOM(0x43) },
 	{ USB_DEVICE_WACOM(0x44) },
 	{ USB_DEVICE_WACOM(0x45) },
+	{ USB_DEVICE_WACOM(0x57) },
 	{ USB_DEVICE_WACOM(0x59) },
 	{ USB_DEVICE_DETAILED(0x5D, USB_CLASS_HID, 0, 0) },
+	{ USB_DEVICE_WACOM(0x5B) },
+	{ USB_DEVICE_DETAILED(0x5E, USB_CLASS_HID, 0, 0) },
 	{ USB_DEVICE_WACOM(0xB0) },
 	{ USB_DEVICE_WACOM(0xB1) },
 	{ USB_DEVICE_WACOM(0xB2) },
@@ -2205,6 +2249,7 @@
 	{ USB_DEVICE_WACOM(0x100) },
 	{ USB_DEVICE_WACOM(0x101) },
 	{ USB_DEVICE_WACOM(0x10D) },
+	{ USB_DEVICE_WACOM(0x304) },
 	{ USB_DEVICE_WACOM(0x4001) },
 	{ USB_DEVICE_WACOM(0x47) },
 	{ USB_DEVICE_WACOM(0xF4) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 5f9a772..dfc9e08 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -82,6 +82,7 @@
 	WACOM_24HD,
 	CINTIQ,
 	WACOM_BEE,
+	WACOM_13HD,
 	WACOM_MO,
 	WIRELESS,
 	BAMBOO_PT,
diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
index 17c9097..39f3df8 100644
--- a/drivers/input/touchscreen/egalax_ts.c
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -216,7 +216,7 @@
 	input_set_abs_params(input_dev,
 			     ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0);
 	input_set_abs_params(input_dev,
-			     ABS_MT_POSITION_X, 0, EGALAX_MAX_Y, 0, 0);
+			     ABS_MT_POSITION_Y, 0, EGALAX_MAX_Y, 0, 0);
 	input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0);
 
 	input_set_drvdata(input_dev, ts);
diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c
index 9b1b274..c123709 100644
--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -93,7 +93,7 @@
 
 static inline struct capi_ctr *get_capi_ctr_by_nr(u16 contr)
 {
-	if (contr - 1 >= CAPI_MAXCONTR)
+	if (contr < 1 || contr - 1 >= CAPI_MAXCONTR)
 		return NULL;
 
 	return capi_controller[contr - 1];
@@ -103,7 +103,7 @@
 {
 	lockdep_assert_held(&capi_controller_lock);
 
-	if (applid - 1 >= CAPI_MAXAPPL)
+	if (applid < 1 || applid - 1 >= CAPI_MAXAPPL)
 		return NULL;
 
 	return capi_applications[applid - 1];
@@ -111,7 +111,7 @@
 
 static inline struct capi20_appl *get_capi_appl_by_nr(u16 applid)
 {
-	if (applid - 1 >= CAPI_MAXAPPL)
+	if (applid < 1 || applid - 1 >= CAPI_MAXAPPL)
 		return NULL;
 
 	return rcu_dereference(capi_applications[applid - 1]);
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index a0d931b..b02b679 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -107,6 +107,10 @@
 		return 0;
 	}
 
+	ret = devm_gpio_request(parent, template->gpio, template->name);
+	if (ret < 0)
+		return ret;
+
 	led_dat->cdev.name = template->name;
 	led_dat->cdev.default_trigger = template->default_trigger;
 	led_dat->gpio = template->gpio;
@@ -126,10 +130,7 @@
 	if (!template->retain_state_suspended)
 		led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
 
-	ret = devm_gpio_request_one(parent, template->gpio,
-				    (led_dat->active_low ^ state) ?
-				    GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
-				    template->name);
+	ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/leds/leds-ot200.c b/drivers/leds/leds-ot200.c
index ee14662e..98cae52 100644
--- a/drivers/leds/leds-ot200.c
+++ b/drivers/leds/leds-ot200.c
@@ -47,37 +47,37 @@
 	{
 		.name = "led_1",
 		.port = 0x49,
-		.mask = BIT(7),
+		.mask = BIT(6),
 	},
 	{
 		.name = "led_2",
 		.port = 0x49,
-		.mask = BIT(6),
+		.mask = BIT(5),
 	},
 	{
 		.name = "led_3",
 		.port = 0x49,
-		.mask = BIT(5),
+		.mask = BIT(4),
 	},
 	{
 		.name = "led_4",
 		.port = 0x49,
-		.mask = BIT(4),
+		.mask = BIT(3),
 	},
 	{
 		.name = "led_5",
 		.port = 0x49,
-		.mask = BIT(3),
+		.mask = BIT(2),
 	},
 	{
 		.name = "led_6",
 		.port = 0x49,
-		.mask = BIT(2),
+		.mask = BIT(1),
 	},
 	{
 		.name = "led_7",
 		.port = 0x49,
-		.mask = BIT(1),
+		.mask = BIT(0),
 	}
 };
 
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d9aed15..d54e985 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -579,7 +579,7 @@
 
 config AB8500_DEBUG
        bool "Enable debug info via debugfs"
-       depends on AB8500_CORE && DEBUG_FS
+       depends on AB8500_GPADC && DEBUG_FS
        default y if DEBUG_FS
        help
          Select this option if you want debug information using the debug
@@ -818,6 +818,7 @@
 config MFD_TPS65912
 	bool "TI TPS65912 Power Management chip"
 	depends on GPIOLIB
+	select MFD_CORE
 	help
 	  If you say yes here you get support for the TPS65912 series of
 	  PM chips.
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 8e8a016..258b367 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -868,6 +868,15 @@
 #ifdef CONFIG_DEBUG_FS
 static struct resource ab8500_debug_resources[] = {
 	{
+		.name	= "IRQ_AB8500",
+		/*
+		 * Number will be filled in. NOTE: this is deliberately
+		 * not flagged as an IRQ in ordet to avoid remapping using
+		 * the irqdomain in the MFD core, so that this IRQ passes
+		 * unremapped to the debug code.
+		 */
+	},
+	{
 		.name	= "IRQ_FIRST",
 		.start	= AB8500_INT_MAIN_EXT_CH_NOT_OK,
 		.end	= AB8500_INT_MAIN_EXT_CH_NOT_OK,
@@ -1051,6 +1060,7 @@
 	},
 	{
 		.name = "ab8500-gpadc",
+		.of_compatible = "stericsson,ab8500-gpadc",
 		.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
 		.resources = ab8500_gpadc_resources,
 	},
@@ -1097,7 +1107,7 @@
 		.of_compatible = "stericsson,ab8500-denc",
 	},
 	{
-		.name = "ab8500-gpio",
+		.name = "pinctrl-ab8500",
 		.of_compatible = "stericsson,ab8500-gpio",
 	},
 	{
@@ -1208,6 +1218,7 @@
 	},
 	{
 		.name = "ab8500-gpadc",
+		.of_compatible = "stericsson,ab8500-gpadc",
 		.num_resources = ARRAY_SIZE(ab8505_gpadc_resources),
 		.resources = ab8505_gpadc_resources,
 	},
@@ -1234,7 +1245,7 @@
 		.name = "ab8500-leds",
 	},
 	{
-		.name = "ab8500-gpio",
+		.name = "pinctrl-ab8505",
 	},
 	{
 		.name = "ab8500-usb",
@@ -1271,6 +1282,7 @@
 	},
 	{
 		.name = "ab8500-gpadc",
+		.of_compatible = "stericsson,ab8500-gpadc",
 		.num_resources = ARRAY_SIZE(ab8505_gpadc_resources),
 		.resources = ab8505_gpadc_resources,
 	},
@@ -1302,7 +1314,7 @@
 		.resources = ab8500_temp_resources,
 	},
 	{
-		.name = "ab8500-gpio",
+		.name = "pinctrl-ab8540",
 	},
 	{
 		.name = "ab8540-usb",
@@ -1712,6 +1724,12 @@
 	if (ret)
 		return ret;
 
+#if CONFIG_DEBUG_FS
+	/* Pass to debugfs */
+	ab8500_debug_resources[0].start = ab8500->irq;
+	ab8500_debug_resources[0].end = ab8500->irq;
+#endif
+
 	if (is_ab9540(ab8500))
 		ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
 				ARRAY_SIZE(ab9540_devs), NULL,
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index b88bbbc..37b7ce4c7 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -91,12 +91,10 @@
 #include <linux/ctype.h>
 #endif
 
-/* TODO: this file should not reference IRQ_DB8500_AB8500! */
-#include <mach/irqs.h>
-
 static u32 debug_bank;
 static u32 debug_address;
 
+static int irq_ab8500;
 static int irq_first;
 static int irq_last;
 static u32 *irq_count;
@@ -1589,7 +1587,7 @@
 {
 	if (line < num_interrupt_lines) {
 		num_interrupts[line]++;
-		if (suspend_test_wake_cause_interrupt_is_mine(IRQ_DB8500_AB8500))
+		if (suspend_test_wake_cause_interrupt_is_mine(irq_ab8500))
 			num_wake_interrupts[line]++;
 	}
 }
@@ -2941,6 +2939,7 @@
 	struct dentry *file;
 	int ret = -ENOMEM;
 	struct ab8500 *ab8500;
+	struct resource *res;
 	debug_bank = AB8500_MISC;
 	debug_address = AB8500_REV_REG & 0x00FF;
 
@@ -2959,6 +2958,15 @@
 	if (!event_name)
 		goto out_freedev_attr;
 
+	res = platform_get_resource_byname(plf, 0, "IRQ_AB8500");
+	if (!res) {
+		dev_err(&plf->dev, "AB8500 irq not found, err %d\n",
+			irq_first);
+		ret = -ENXIO;
+		goto out_freeevent_name;
+	}
+	irq_ab8500 = res->start;
+
 	irq_first = platform_get_irq_byname(plf, "IRQ_FIRST");
 	if (irq_first < 0) {
 		dev_err(&plf->dev, "First irq not found, err %d\n",
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 5e65b28..13f7866 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -907,14 +907,17 @@
 static int ab8500_gpadc_resume(struct device *dev)
 {
 	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+	int ret;
 
-	regulator_enable(gpadc->regu);
+	ret = regulator_enable(gpadc->regu);
+	if (ret)
+		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
 
 	pm_runtime_mark_last_busy(gpadc->dev);
 	pm_runtime_put_autosuspend(gpadc->dev);
 
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
-	return 0;
+	return ret;
 }
 
 static int ab8500_gpadc_probe(struct platform_device *pdev)
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index fbca1ce..8e0dae5 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -23,7 +23,7 @@
 
 static struct device *sysctrl_dev;
 
-void ab8500_power_off(void)
+static void ab8500_power_off(void)
 {
 	sigset_t old;
 	sigset_t all;
@@ -104,7 +104,7 @@
 
 	plat = dev_get_platdata(sysctrl_dev->parent);
 	pdata = plat->sysctrl;
-	if (pdata->reboot_reason_code)
+	if (pdata && pdata->reboot_reason_code)
 		reason = pdata->reboot_reason_code(cmd);
 	else
 		pr_warn("[%s] No reboot reason set. Default reason %d\n",
@@ -188,14 +188,15 @@
 
 	plat = dev_get_platdata(pdev->dev.parent);
 
-	if (!(plat && plat->sysctrl))
+	if (!plat)
 		return -EINVAL;
 
-	if (plat->pm_power_off)
+	sysctrl_dev = &pdev->dev;
+
+	if (!pm_power_off)
 		pm_power_off = ab8500_power_off;
 
 	pdata = plat->sysctrl;
-
 	if (pdata) {
 		int last, ret, i, j;
 
@@ -226,6 +227,10 @@
 static int ab8500_sysctrl_remove(struct platform_device *pdev)
 {
 	sysctrl_dev = NULL;
+
+	if (pm_power_off == ab8500_power_off)
+		pm_power_off = NULL;
+
 	return 0;
 }
 
diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c
index 9818afb..3714acb 100644
--- a/drivers/mfd/abx500-core.c
+++ b/drivers/mfd/abx500-core.c
@@ -156,7 +156,7 @@
 void abx500_dump_all_banks(void)
 {
 	struct abx500_ops *ops;
-	struct device dummy_child = {0};
+	struct device dummy_child = {NULL};
 	struct abx500_device_entry *dev_entry;
 
 	list_for_each_entry(dev_entry, &abx500_list, list) {
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index 19193cf..367ccb5 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -120,7 +120,7 @@
 
 		for (end = ptr + EC_MSG_PREAMBLE_COUNT; ptr != end; ptr++) {
 			if (*ptr == EC_MSG_HEADER) {
-				dev_dbg(ec_dev->dev, "msg found at %ld\n",
+				dev_dbg(ec_dev->dev, "msg found at %zd\n",
 					ptr - ec_dev->din);
 				break;
 			}
@@ -154,7 +154,7 @@
 		 * maximum-supported transfer size.
 		 */
 		todo = min(need_len, 256);
-		dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%ld\n",
+		dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%zd\n",
 			todo, need_len, ptr - ec_dev->din);
 
 		memset(&trans, '\0', sizeof(trans));
@@ -178,7 +178,7 @@
 		need_len -= todo;
 	}
 
-	dev_dbg(ec_dev->dev, "loop done, ptr=%ld\n", ptr - ec_dev->din);
+	dev_dbg(ec_dev->dev, "loop done, ptr=%zd\n", ptr - ec_dev->din);
 
 	return 0;
 }
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 319b8ab..66f8097 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -1613,6 +1613,8 @@
 
 	if (divsel == PRCM_DSI_PLLOUT_SEL_OFF)
 		divsel = dsiclk[n].divsel;
+	else
+		dsiclk[n].divsel = divsel;
 
 	switch (divsel) {
 	case PRCM_DSI_PLLOUT_SEL_PHI_4:
@@ -3095,6 +3097,7 @@
 		.num_resources = ARRAY_SIZE(db8500_thsens_resources),
 		.resources = db8500_thsens_resources,
 		.platform_data = &db8500_thsens_data,
+		.pdata_size = sizeof(db8500_thsens_data),
 	},
 };
 
diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c
index de48b4e..6f1ef63 100644
--- a/drivers/mfd/si476x-cmd.c
+++ b/drivers/mfd/si476x-cmd.c
@@ -29,6 +29,8 @@
 
 #include <linux/mfd/si476x-core.h>
 
+#include <asm/unaligned.h>
+
 #define msb(x)                  ((u8)((u16) x >> 8))
 #define lsb(x)                  ((u8)((u16) x &  0x00FF))
 
@@ -150,7 +152,7 @@
 	SI476X_ACF_SOFTMUTE_INT	= (1 << 0),
 
 	SI476X_ACF_SMUTE	= (1 << 0),
-	SI476X_ACF_SMATTN	= 0b11111,
+	SI476X_ACF_SMATTN	= 0x1f,
 	SI476X_ACF_PILOT	= (1 << 7),
 	SI476X_ACF_STBLEND	= ~SI476X_ACF_PILOT,
 };
@@ -483,7 +485,7 @@
 	if (err < 0)
 		return err;
 	else
-		return be16_to_cpup((__be16 *)(resp + 2));
+		return get_unaligned_be16(resp + 2);
 }
 EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property);
 
@@ -772,18 +774,18 @@
 	if (!report)
 		return err;
 
-	report->snrhint		= 0b00001000 & resp[1];
-	report->snrlint		= 0b00000100 & resp[1];
-	report->rssihint	= 0b00000010 & resp[1];
-	report->rssilint	= 0b00000001 & resp[1];
+	report->snrhint		= 0x08 & resp[1];
+	report->snrlint		= 0x04 & resp[1];
+	report->rssihint	= 0x02 & resp[1];
+	report->rssilint	= 0x01 & resp[1];
 
-	report->bltf		= 0b10000000 & resp[2];
-	report->snr_ready	= 0b00100000 & resp[2];
-	report->rssiready	= 0b00001000 & resp[2];
-	report->afcrl		= 0b00000010 & resp[2];
-	report->valid		= 0b00000001 & resp[2];
+	report->bltf		= 0x80 & resp[2];
+	report->snr_ready	= 0x20 & resp[2];
+	report->rssiready	= 0x08 & resp[2];
+	report->afcrl		= 0x02 & resp[2];
+	report->valid		= 0x01 & resp[2];
 
-	report->readfreq	= be16_to_cpup((__be16 *)(resp + 3));
+	report->readfreq	= get_unaligned_be16(resp + 3);
 	report->freqoff		= resp[5];
 	report->rssi		= resp[6];
 	report->snr		= resp[7];
@@ -931,26 +933,26 @@
 	if (err < 0 || report == NULL)
 		return err;
 
-	report->rdstpptyint	= 0b00010000 & resp[1];
-	report->rdspiint	= 0b00001000 & resp[1];
-	report->rdssyncint	= 0b00000010 & resp[1];
-	report->rdsfifoint	= 0b00000001 & resp[1];
+	report->rdstpptyint	= 0x10 & resp[1];
+	report->rdspiint	= 0x08 & resp[1];
+	report->rdssyncint	= 0x02 & resp[1];
+	report->rdsfifoint	= 0x01 & resp[1];
 
-	report->tpptyvalid	= 0b00010000 & resp[2];
-	report->pivalid		= 0b00001000 & resp[2];
-	report->rdssync		= 0b00000010 & resp[2];
-	report->rdsfifolost	= 0b00000001 & resp[2];
+	report->tpptyvalid	= 0x10 & resp[2];
+	report->pivalid		= 0x08 & resp[2];
+	report->rdssync		= 0x02 & resp[2];
+	report->rdsfifolost	= 0x01 & resp[2];
 
-	report->tp		= 0b00100000 & resp[3];
-	report->pty		= 0b00011111 & resp[3];
+	report->tp		= 0x20 & resp[3];
+	report->pty		= 0x1f & resp[3];
 
-	report->pi		= be16_to_cpup((__be16 *)(resp + 4));
+	report->pi		= get_unaligned_be16(resp + 4);
 	report->rdsfifoused	= resp[6];
 
-	report->ble[V4L2_RDS_BLOCK_A]	= 0b11000000 & resp[7];
-	report->ble[V4L2_RDS_BLOCK_B]	= 0b00110000 & resp[7];
-	report->ble[V4L2_RDS_BLOCK_C]	= 0b00001100 & resp[7];
-	report->ble[V4L2_RDS_BLOCK_D]	= 0b00000011 & resp[7];
+	report->ble[V4L2_RDS_BLOCK_A]	= 0xc0 & resp[7];
+	report->ble[V4L2_RDS_BLOCK_B]	= 0x30 & resp[7];
+	report->ble[V4L2_RDS_BLOCK_C]	= 0x0c & resp[7];
+	report->ble[V4L2_RDS_BLOCK_D]	= 0x03 & resp[7];
 
 	report->rds[V4L2_RDS_BLOCK_A].block = V4L2_RDS_BLOCK_A;
 	report->rds[V4L2_RDS_BLOCK_A].msb = resp[8];
@@ -991,9 +993,9 @@
 				       SI476X_DEFAULT_TIMEOUT);
 
 	if (!err) {
-		report->expected	= be16_to_cpup((__be16 *)(resp + 2));
-		report->received	= be16_to_cpup((__be16 *)(resp + 4));
-		report->uncorrectable	= be16_to_cpup((__be16 *)(resp + 6));
+		report->expected	= get_unaligned_be16(resp + 2);
+		report->received	= get_unaligned_be16(resp + 4);
+		report->uncorrectable	= get_unaligned_be16(resp + 6);
 	}
 
 	return err;
@@ -1005,7 +1007,7 @@
 {
 	u8       resp[CMD_FM_PHASE_DIVERSITY_NRESP];
 	const u8 args[CMD_FM_PHASE_DIVERSITY_NARGS] = {
-		mode & 0b111,
+		mode & 0x07,
 	};
 
 	return si476x_core_send_command(core, CMD_FM_PHASE_DIVERSITY,
@@ -1162,7 +1164,7 @@
 	const int am_freq = tuneargs->freq;
 	u8       resp[CMD_AM_TUNE_FREQ_NRESP];
 	const u8 args[CMD_AM_TUNE_FREQ_NARGS] = {
-		(tuneargs->zifsr << 6) | (tuneargs->injside & 0b11),
+		(tuneargs->zifsr << 6) | (tuneargs->injside & 0x03),
 		msb(am_freq),
 		lsb(am_freq),
 	};
@@ -1197,20 +1199,20 @@
 	if (err < 0 || report == NULL)
 		return err;
 
-	report->multhint	= 0b10000000 & resp[1];
-	report->multlint	= 0b01000000 & resp[1];
-	report->snrhint		= 0b00001000 & resp[1];
-	report->snrlint		= 0b00000100 & resp[1];
-	report->rssihint	= 0b00000010 & resp[1];
-	report->rssilint	= 0b00000001 & resp[1];
+	report->multhint	= 0x80 & resp[1];
+	report->multlint	= 0x40 & resp[1];
+	report->snrhint		= 0x08 & resp[1];
+	report->snrlint		= 0x04 & resp[1];
+	report->rssihint	= 0x02 & resp[1];
+	report->rssilint	= 0x01 & resp[1];
 
-	report->bltf		= 0b10000000 & resp[2];
-	report->snr_ready	= 0b00100000 & resp[2];
-	report->rssiready	= 0b00001000 & resp[2];
-	report->afcrl		= 0b00000010 & resp[2];
-	report->valid		= 0b00000001 & resp[2];
+	report->bltf		= 0x80 & resp[2];
+	report->snr_ready	= 0x20 & resp[2];
+	report->rssiready	= 0x08 & resp[2];
+	report->afcrl		= 0x02 & resp[2];
+	report->valid		= 0x01 & resp[2];
 
-	report->readfreq	= be16_to_cpup((__be16 *)(resp + 3));
+	report->readfreq	= get_unaligned_be16(resp + 3);
 	report->freqoff		= resp[5];
 	report->rssi		= resp[6];
 	report->snr		= resp[7];
@@ -1218,7 +1220,7 @@
 	report->hassi		= resp[10];
 	report->mult		= resp[11];
 	report->dev		= resp[12];
-	report->readantcap	= be16_to_cpup((__be16 *)(resp + 13));
+	report->readantcap	= get_unaligned_be16(resp + 13);
 	report->assi		= resp[15];
 	report->usn		= resp[16];
 
@@ -1251,20 +1253,20 @@
 	if (err < 0 || report == NULL)
 		return err;
 
-	report->multhint	= 0b10000000 & resp[1];
-	report->multlint	= 0b01000000 & resp[1];
-	report->snrhint		= 0b00001000 & resp[1];
-	report->snrlint		= 0b00000100 & resp[1];
-	report->rssihint	= 0b00000010 & resp[1];
-	report->rssilint	= 0b00000001 & resp[1];
+	report->multhint	= 0x80 & resp[1];
+	report->multlint	= 0x40 & resp[1];
+	report->snrhint		= 0x08 & resp[1];
+	report->snrlint		= 0x04 & resp[1];
+	report->rssihint	= 0x02 & resp[1];
+	report->rssilint	= 0x01 & resp[1];
 
-	report->bltf		= 0b10000000 & resp[2];
-	report->snr_ready	= 0b00100000 & resp[2];
-	report->rssiready	= 0b00001000 & resp[2];
-	report->afcrl		= 0b00000010 & resp[2];
-	report->valid		= 0b00000001 & resp[2];
+	report->bltf		= 0x80 & resp[2];
+	report->snr_ready	= 0x20 & resp[2];
+	report->rssiready	= 0x08 & resp[2];
+	report->afcrl		= 0x02 & resp[2];
+	report->valid		= 0x01 & resp[2];
 
-	report->readfreq	= be16_to_cpup((__be16 *)(resp + 3));
+	report->readfreq	= get_unaligned_be16(resp + 3);
 	report->freqoff		= resp[5];
 	report->rssi		= resp[6];
 	report->snr		= resp[7];
@@ -1272,7 +1274,7 @@
 	report->hassi		= resp[10];
 	report->mult		= resp[11];
 	report->dev		= resp[12];
-	report->readantcap	= be16_to_cpup((__be16 *)(resp + 13));
+	report->readantcap	= get_unaligned_be16(resp + 13);
 	report->assi		= resp[15];
 	report->usn		= resp[16];
 
@@ -1306,21 +1308,21 @@
 	if (err < 0 || report == NULL)
 		return err;
 
-	report->multhint	= 0b10000000 & resp[1];
-	report->multlint	= 0b01000000 & resp[1];
-	report->snrhint		= 0b00001000 & resp[1];
-	report->snrlint		= 0b00000100 & resp[1];
-	report->rssihint	= 0b00000010 & resp[1];
-	report->rssilint	= 0b00000001 & resp[1];
+	report->multhint	= 0x80 & resp[1];
+	report->multlint	= 0x40 & resp[1];
+	report->snrhint		= 0x08 & resp[1];
+	report->snrlint		= 0x04 & resp[1];
+	report->rssihint	= 0x02 & resp[1];
+	report->rssilint	= 0x01 & resp[1];
 
-	report->bltf		= 0b10000000 & resp[2];
-	report->snr_ready	= 0b00100000 & resp[2];
-	report->rssiready	= 0b00001000 & resp[2];
-	report->injside         = 0b00000100 & resp[2];
-	report->afcrl		= 0b00000010 & resp[2];
-	report->valid		= 0b00000001 & resp[2];
+	report->bltf		= 0x80 & resp[2];
+	report->snr_ready	= 0x20 & resp[2];
+	report->rssiready	= 0x08 & resp[2];
+	report->injside         = 0x04 & resp[2];
+	report->afcrl		= 0x02 & resp[2];
+	report->valid		= 0x01 & resp[2];
 
-	report->readfreq	= be16_to_cpup((__be16 *)(resp + 3));
+	report->readfreq	= get_unaligned_be16(resp + 3);
 	report->freqoff		= resp[5];
 	report->rssi		= resp[6];
 	report->snr		= resp[7];
@@ -1329,7 +1331,7 @@
 	report->hassi		= resp[10];
 	report->mult		= resp[11];
 	report->dev		= resp[12];
-	report->readantcap	= be16_to_cpup((__be16 *)(resp + 13));
+	report->readantcap	= get_unaligned_be16(resp + 13);
 	report->assi		= resp[15];
 	report->usn		= resp[16];
 
@@ -1337,7 +1339,7 @@
 	report->rdsdev		= resp[18];
 	report->assidev		= resp[19];
 	report->strongdev	= resp[20];
-	report->rdspi		= be16_to_cpup((__be16 *)(resp + 21));
+	report->rdspi		= get_unaligned_be16(resp + 21);
 
 	return err;
 }
diff --git a/drivers/misc/dummy-irq.c b/drivers/misc/dummy-irq.c
index 7014167..c37eeed 100644
--- a/drivers/misc/dummy-irq.c
+++ b/drivers/misc/dummy-irq.c
@@ -19,7 +19,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 
-static int irq;
+static int irq = -1;
 
 static irqreturn_t dummy_interrupt(int irq, void *dev_id)
 {
@@ -36,6 +36,10 @@
 
 static int __init dummy_irq_init(void)
 {
+	if (irq < 0) {
+		printk(KERN_ERR "dummy-irq: no IRQ given.  Use irq=N\n");
+		return -EIO;
+	}
 	if (request_irq(irq, &dummy_interrupt, IRQF_SHARED, "dummy_irq", &irq)) {
 		printk(KERN_ERR "dummy-irq: cannot register IRQ %d\n", irq);
 		return -EIO;
diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c
index 1e935ea..9ecd49a 100644
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -496,6 +496,8 @@
 		}
 	}
 
+	device->event_cb = NULL;
+
 	mutex_unlock(&dev->device_lock);
 
 	if (!device->ops || !device->ops->disable)
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index 7c44c8d..053139f 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -489,11 +489,16 @@
 
 	/* find ME client we're trying to connect to */
 	i = mei_me_cl_by_uuid(dev, &data->in_client_uuid);
-	if (i >= 0 && !dev->me_clients[i].props.fixed_address) {
-		cl->me_client_id = dev->me_clients[i].client_id;
-		cl->state = MEI_FILE_CONNECTING;
+	if (i < 0 || dev->me_clients[i].props.fixed_address) {
+		dev_dbg(&dev->pdev->dev, "Cannot connect to FW Client UUID = %pUl\n",
+				&data->in_client_uuid);
+		rets = -ENODEV;
+		goto end;
 	}
 
+	cl->me_client_id = dev->me_clients[i].client_id;
+	cl->state = MEI_FILE_CONNECTING;
+
 	dev_dbg(&dev->pdev->dev, "Connect to FW Client ID = %d\n",
 			cl->me_client_id);
 	dev_dbg(&dev->pdev->dev, "FW Client - Protocol Version = %d\n",
@@ -527,11 +532,6 @@
 		goto end;
 	}
 
-	if (cl->state != MEI_FILE_CONNECTING) {
-		rets = -ENODEV;
-		goto end;
-	}
-
 
 	/* prepare the output buffer */
 	client = &data->out_client_properties;
@@ -543,7 +543,6 @@
 	rets = mei_cl_connect(cl, file);
 
 end:
-	dev_dbg(&dev->pdev->dev, "free connect cb memory.");
 	return rets;
 }
 
diff --git a/drivers/misc/vmw_vmci/Kconfig b/drivers/misc/vmw_vmci/Kconfig
index ea98f7e..39c2eca 100644
--- a/drivers/misc/vmw_vmci/Kconfig
+++ b/drivers/misc/vmw_vmci/Kconfig
@@ -4,7 +4,7 @@
 
 config VMWARE_VMCI
 	tristate "VMware VMCI Driver"
-	depends on X86 && PCI && NET
+	depends on X86 && PCI
 	help
 	  This is VMware's Virtual Machine Communication Interface.  It enables
 	  high-speed communication between host and guest in a virtual
diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.c b/drivers/misc/vmw_vmci/vmci_queue_pair.c
index d94245d..8ff2e5e 100644
--- a/drivers/misc/vmw_vmci/vmci_queue_pair.c
+++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c
@@ -23,7 +23,7 @@
 #include <linux/pagemap.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/socket.h>
+#include <linux/uio.h>
 #include <linux/wait.h>
 #include <linux/vmalloc.h>
 
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index fc58d11..390061d 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2360,14 +2360,15 @@
 }
 
 /**
- * bond_3ad_get_active_agg_info - get information of the active aggregator
+ * __bond_3ad_get_active_agg_info - get information of the active aggregator
  * @bond: bonding struct to work on
  * @ad_info: ad_info struct to fill with the bond's info
  *
  * Returns:   0 on success
  *          < 0 on error
  */
-int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info)
+int __bond_3ad_get_active_agg_info(struct bonding *bond,
+				   struct ad_info *ad_info)
 {
 	struct aggregator *aggregator = NULL;
 	struct port *port;
@@ -2391,6 +2392,18 @@
 	return -1;
 }
 
+/* Wrapper used to hold bond->lock so no slave manipulation can occur */
+int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info)
+{
+	int ret;
+
+	read_lock(&bond->lock);
+	ret = __bond_3ad_get_active_agg_info(bond, ad_info);
+	read_unlock(&bond->lock);
+
+	return ret;
+}
+
 int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
 {
 	struct slave *slave, *start_at;
@@ -2402,8 +2415,8 @@
 	struct ad_info ad_info;
 	int res = 1;
 
-	if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
-		pr_debug("%s: Error: bond_3ad_get_active_agg_info failed\n",
+	if (__bond_3ad_get_active_agg_info(bond, &ad_info)) {
+		pr_debug("%s: Error: __bond_3ad_get_active_agg_info failed\n",
 			 dev->name);
 		goto out;
 	}
diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
index 0cfaa4a..5d91ad0 100644
--- a/drivers/net/bonding/bond_3ad.h
+++ b/drivers/net/bonding/bond_3ad.h
@@ -273,6 +273,8 @@
 void bond_3ad_adapter_duplex_changed(struct slave *slave);
 void bond_3ad_handle_link_change(struct slave *slave, char link);
 int  bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info);
+int  __bond_3ad_get_active_agg_info(struct bonding *bond,
+				    struct ad_info *ad_info);
 int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev);
 int bond_3ad_lacpdu_recv(const struct sk_buff *skb, struct bonding *bond,
 			 struct slave *slave);
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index d0aade0..29b846c 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1362,6 +1362,7 @@
 						     slave->dev->features,
 						     mask);
 	}
+	features = netdev_add_tso_features(features, mask);
 
 out:
 	read_unlock(&bond->lock);
@@ -2555,8 +2556,8 @@
 {
 	struct sk_buff *skb;
 
-	pr_debug("arp %d on slave %s: dst %x src %x vid %d\n", arp_op,
-		 slave_dev->name, dest_ip, src_ip, vlan_id);
+	pr_debug("arp %d on slave %s: dst %pI4 src %pI4 vid %d\n", arp_op,
+		 slave_dev->name, &dest_ip, &src_ip, vlan_id);
 
 	skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
 			 NULL, slave_dev->dev_addr, NULL);
@@ -2588,7 +2589,7 @@
 		__be32 addr;
 		if (!targets[i])
 			break;
-		pr_debug("basa: target %x\n", targets[i]);
+		pr_debug("basa: target %pI4\n", &targets[i]);
 		if (!bond_vlan_used(bond)) {
 			pr_debug("basa: empty vlan: arp_send\n");
 			addr = bond_confirm_addr(bond->dev, targets[i], 0);
@@ -4470,7 +4471,7 @@
 
 static int bond_check_params(struct bond_params *params)
 {
-	int arp_validate_value, fail_over_mac_value, primary_reselect_value;
+	int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
 
 	/*
 	 * Convert string parameters.
@@ -4650,19 +4651,18 @@
 		arp_interval = BOND_LINK_ARP_INTERV;
 	}
 
-	for (arp_ip_count = 0;
-	     (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[arp_ip_count];
-	     arp_ip_count++) {
+	for (arp_ip_count = 0, i = 0;
+	     (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[i]; i++) {
 		/* not complete check, but should be good enough to
 		   catch mistakes */
-		__be32 ip = in_aton(arp_ip_target[arp_ip_count]);
-		if (!isdigit(arp_ip_target[arp_ip_count][0]) ||
-		    ip == 0 || ip == htonl(INADDR_BROADCAST)) {
+		__be32 ip = in_aton(arp_ip_target[i]);
+		if (!isdigit(arp_ip_target[i][0]) || ip == 0 ||
+		    ip == htonl(INADDR_BROADCAST)) {
 			pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
-				   arp_ip_target[arp_ip_count]);
+				   arp_ip_target[i]);
 			arp_interval = 0;
 		} else {
-			arp_target[arp_ip_count] = ip;
+			arp_target[arp_ip_count++] = ip;
 		}
 	}
 
@@ -4696,8 +4696,6 @@
 	if (miimon) {
 		pr_info("MII link monitoring set to %d ms\n", miimon);
 	} else if (arp_interval) {
-		int i;
-
 		pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
 			arp_interval,
 			arp_validate_tbl[arp_validate_value].modename,
diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index 94d06f1..4060d41 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -130,7 +130,7 @@
 		seq_printf(seq, "Aggregator selection policy (ad_select): %s\n",
 			   ad_select_tbl[bond->params.ad_select].modename);
 
-		if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
+		if (__bond_3ad_get_active_agg_info(bond, &ad_info)) {
 			seq_printf(seq, "bond %s has no active aggregator\n",
 				   bond->dev->name);
 		} else {
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index ea7a388..d7434e0 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -316,6 +316,9 @@
 	int new_value, ret = count;
 	struct bonding *bond = to_bond(d);
 
+	if (!rtnl_trylock())
+		return restart_syscall();
+
 	if (bond->dev->flags & IFF_UP) {
 		pr_err("unable to update mode of %s because interface is up.\n",
 		       bond->dev->name);
@@ -352,6 +355,7 @@
 		bond->dev->name, bond_mode_tbl[new_value].modename,
 		new_value);
 out:
+	rtnl_unlock();
 	return ret;
 }
 static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
@@ -1315,7 +1319,6 @@
 }
 static DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL);
 
-
 /*
  * Show current 802.3ad aggregator ID.
  */
@@ -1329,7 +1332,7 @@
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
 		count = sprintf(buf, "%d\n",
-				(bond_3ad_get_active_agg_info(bond, &ad_info))
+				bond_3ad_get_active_agg_info(bond, &ad_info)
 				?  0 : ad_info.aggregator_id);
 	}
 
@@ -1351,7 +1354,7 @@
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
 		count = sprintf(buf, "%d\n",
-				(bond_3ad_get_active_agg_info(bond, &ad_info))
+				bond_3ad_get_active_agg_info(bond, &ad_info)
 				?  0 : ad_info.ports);
 	}
 
@@ -1373,7 +1376,7 @@
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
 		count = sprintf(buf, "%d\n",
-				(bond_3ad_get_active_agg_info(bond, &ad_info))
+				bond_3ad_get_active_agg_info(bond, &ad_info)
 				?  0 : ad_info.actor_key);
 	}
 
@@ -1395,7 +1398,7 @@
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
 		count = sprintf(buf, "%d\n",
-				(bond_3ad_get_active_agg_info(bond, &ad_info))
+				bond_3ad_get_active_agg_info(bond, &ad_info)
 				?  0 : ad_info.partner_key);
 	}
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index b8fbe26..be59ec4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -3313,6 +3313,7 @@
  */
 static void bnx2x_set_pbd_gso(struct sk_buff *skb,
 			      struct eth_tx_parse_bd_e1x *pbd,
+			      struct eth_tx_start_bd *tx_start_bd,
 			      u32 xmit_type)
 {
 	pbd->lso_mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
@@ -3326,11 +3327,14 @@
 						   ip_hdr(skb)->daddr,
 						   0, IPPROTO_TCP, 0));
 
-	} else
+		/* GSO on 57710/57711 needs FW to calculate IP checksum */
+		tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IP_CSUM;
+	} else {
 		pbd->tcp_pseudo_csum =
 			bswab16(~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 						 &ipv6_hdr(skb)->daddr,
 						 0, IPPROTO_TCP, 0));
+	}
 
 	pbd->global_data |=
 		cpu_to_le16(ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN);
@@ -3814,7 +3818,8 @@
 			bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data,
 					     xmit_type);
 		else
-			bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type);
+			bnx2x_set_pbd_gso(skb, pbd_e1x, tx_start_bd,
+					  xmit_type);
 	}
 
 	/* Set the PBD's parsing_data field if not zero
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 728d42a..1f2dd92 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -94,10 +94,10 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define TG3_MAJ_NUM			3
-#define TG3_MIN_NUM			131
+#define TG3_MIN_NUM			132
 #define DRV_MODULE_VERSION	\
 	__stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM)
-#define DRV_MODULE_RELDATE	"April 09, 2013"
+#define DRV_MODULE_RELDATE	"May 21, 2013"
 
 #define RESET_KIND_SHUTDOWN	0
 #define RESET_KIND_INIT		1
@@ -2957,6 +2957,31 @@
 	return 0;
 }
 
+static bool tg3_phy_power_bug(struct tg3 *tp)
+{
+	switch (tg3_asic_rev(tp)) {
+	case ASIC_REV_5700:
+	case ASIC_REV_5704:
+		return true;
+	case ASIC_REV_5780:
+		if (tp->phy_flags & TG3_PHYFLG_MII_SERDES)
+			return true;
+		return false;
+	case ASIC_REV_5717:
+		if (!tp->pci_fn)
+			return true;
+		return false;
+	case ASIC_REV_5719:
+	case ASIC_REV_5720:
+		if ((tp->phy_flags & TG3_PHYFLG_PHY_SERDES) &&
+		    !tp->pci_fn)
+			return true;
+		return false;
+	}
+
+	return false;
+}
+
 static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power)
 {
 	u32 val;
@@ -3016,12 +3041,7 @@
 	/* The PHY should not be powered down on some chips because
 	 * of bugs.
 	 */
-	if (tg3_asic_rev(tp) == ASIC_REV_5700 ||
-	    tg3_asic_rev(tp) == ASIC_REV_5704 ||
-	    (tg3_asic_rev(tp) == ASIC_REV_5780 &&
-	     (tp->phy_flags & TG3_PHYFLG_MII_SERDES)) ||
-	    (tg3_asic_rev(tp) == ASIC_REV_5717 &&
-	     !tp->pci_fn))
+	if (tg3_phy_power_bug(tp))
 		return;
 
 	if (tg3_chip_rev(tp) == CHIPREV_5784_AX ||
@@ -7428,6 +7448,20 @@
 	return (base > 0xffffdcc0) && (base + len + 8 < base);
 }
 
+/* Test for TSO DMA buffers that cross into regions which are within MSS bytes
+ * of any 4GB boundaries: 4G, 8G, etc
+ */
+static inline int tg3_4g_tso_overflow_test(struct tg3 *tp, dma_addr_t mapping,
+					   u32 len, u32 mss)
+{
+	if (tg3_asic_rev(tp) == ASIC_REV_5762 && mss) {
+		u32 base = (u32) mapping & 0xffffffff;
+
+		return ((base + len + (mss & 0x3fff)) < base);
+	}
+	return 0;
+}
+
 /* Test for DMA addresses > 40-bit */
 static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping,
 					  int len)
@@ -7464,6 +7498,9 @@
 	if (tg3_4g_overflow_test(map, len))
 		hwbug = true;
 
+	if (tg3_4g_tso_overflow_test(tp, map, len, mss))
+		hwbug = true;
+
 	if (tg3_40bit_overflow_test(tp, map, len))
 		hwbug = true;
 
@@ -8874,6 +8911,10 @@
 		tg3_halt_cpu(tp, RX_CPU_BASE);
 	}
 
+	err = tg3_poll_fw(tp);
+	if (err)
+		return err;
+
 	tw32(GRC_MODE, tp->grc_mode);
 
 	if (tg3_chip_rev_id(tp) == CHIPREV_ID_5705_A0) {
@@ -8904,10 +8945,6 @@
 
 	tg3_ape_unlock(tp, TG3_APE_LOCK_GRC);
 
-	err = tg3_poll_fw(tp);
-	if (err)
-		return err;
-
 	tg3_mdio_start(tp);
 
 	if (tg3_flag(tp, PCI_EXPRESS) &&
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 6be513d..c89aa41 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -485,7 +485,8 @@
 	status = macb_readl(bp, TSR);
 	macb_writel(bp, TSR, status);
 
-	macb_writel(bp, ISR, MACB_BIT(TCOMP));
+	if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
+		macb_writel(bp, ISR, MACB_BIT(TCOMP));
 
 	netdev_vdbg(bp->dev, "macb_tx_interrupt status = 0x%03lx\n",
 		(unsigned long)status);
@@ -738,7 +739,8 @@
 			 * now.
 			 */
 			macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
-			macb_writel(bp, ISR, MACB_BIT(RCOMP));
+			if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
+				macb_writel(bp, ISR, MACB_BIT(RCOMP));
 
 			if (napi_schedule_prep(&bp->napi)) {
 				netdev_vdbg(bp->dev, "scheduling RX softirq\n");
@@ -1062,6 +1064,17 @@
 	}
 }
 
+/*
+ * Configure peripheral capacities according to integration options used
+ */
+static void macb_configure_caps(struct macb *bp)
+{
+	if (macb_is_gem(bp)) {
+		if (GEM_BF(IRQCOR, gem_readl(bp, DCFG1)) == 0)
+			bp->caps |= MACB_CAPS_ISR_CLEAR_ON_WRITE;
+	}
+}
+
 static void macb_init_hw(struct macb *bp)
 {
 	u32 config;
@@ -1084,6 +1097,7 @@
 	bp->duplex = DUPLEX_HALF;
 
 	macb_configure_dma(bp);
+	macb_configure_caps(bp);
 
 	/* Initialize TX and RX buffers */
 	macb_writel(bp, RBQP, bp->rx_ring_dma);
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 993d703..548c0ec 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -300,6 +300,8 @@
 #define MACB_REV_SIZE				16
 
 /* Bitfields in DCFG1. */
+#define GEM_IRQCOR_OFFSET			23
+#define GEM_IRQCOR_SIZE				1
 #define GEM_DBWDEF_OFFSET			25
 #define GEM_DBWDEF_SIZE				3
 
@@ -323,6 +325,9 @@
 #define MACB_MAN_READ				2
 #define MACB_MAN_CODE				2
 
+/* Capability mask bits */
+#define MACB_CAPS_ISR_CLEAR_ON_WRITE		0x1
+
 /* Bit manipulation macros */
 #define MACB_BIT(name)					\
 	(1 << MACB_##name##_OFFSET)
@@ -574,6 +579,8 @@
 	unsigned int 		speed;
 	unsigned int 		duplex;
 
+	u32			caps;
+
 	phy_interface_t		phy_interface;
 
 	/* AT91RM9200 transmit */
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index fd7b547..a236ecd 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -2976,22 +2976,17 @@
 	for (i = 0; i < desc_count; i++) {
 		desc->desc_len = desc->desc_len ? : RESOURCE_DESC_SIZE;
 		if (((void *)desc + desc->desc_len) >
-		    (void *)(buf + max_buf_size)) {
-			desc = NULL;
-			break;
-		}
+		    (void *)(buf + max_buf_size))
+			return NULL;
 
 		if (desc->desc_type == NIC_RESOURCE_DESC_TYPE_V0 ||
 		    desc->desc_type == NIC_RESOURCE_DESC_TYPE_V1)
-			break;
+			return desc;
 
 		desc = (void *)desc + desc->desc_len;
 	}
 
-	if (!desc || i == MAX_RESOURCE_DESC)
-		return NULL;
-
-	return desc;
+	return NULL;
 }
 
 /* Uses Mbox */
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index a444110..ca2967b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -780,26 +780,18 @@
 	if (unlikely(!skb))
 		return skb;
 
-	if (vlan_tx_tag_present(skb)) {
+	if (vlan_tx_tag_present(skb))
 		vlan_tag = be_get_tx_vlan_tag(adapter, skb);
-		skb = __vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
-		if (skb)
-			skb->vlan_tci = 0;
-	}
-
-	if (qnq_async_evt_rcvd(adapter) && adapter->pvid) {
-		if (!vlan_tag)
-			vlan_tag = adapter->pvid;
-		if (skip_hw_vlan)
-			*skip_hw_vlan = true;
-	}
+	else if (qnq_async_evt_rcvd(adapter) && adapter->pvid)
+		vlan_tag = adapter->pvid;
 
 	if (vlan_tag) {
 		skb = __vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
 		if (unlikely(!skb))
 			return skb;
-
 		skb->vlan_tci = 0;
+		if (skip_hw_vlan)
+			*skip_hw_vlan = true;
 	}
 
 	/* Insert the outer VLAN, if any */
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index ca9825c..85a0603 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -109,7 +109,7 @@
 		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
 				FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM,
 	}, {
-		.name = "mvf-fec",
+		.name = "mvf600-fec",
 		.driver_data = FEC_QUIRK_ENET_MAC,
 	}, {
 		/* sentinel */
@@ -122,7 +122,7 @@
 	IMX27_FEC,	/* runs on i.mx27/35/51 */
 	IMX28_FEC,
 	IMX6Q_FEC,
-	MVF_FEC,
+	MVF600_FEC,
 };
 
 static const struct of_device_id fec_dt_ids[] = {
@@ -130,7 +130,7 @@
 	{ .compatible = "fsl,imx27-fec", .data = &fec_devtype[IMX27_FEC], },
 	{ .compatible = "fsl,imx28-fec", .data = &fec_devtype[IMX28_FEC], },
 	{ .compatible = "fsl,imx6q-fec", .data = &fec_devtype[IMX6Q_FEC], },
-	{ .compatible = "fsl,mvf-fec", .data = &fec_devtype[MVF_FEC], },
+	{ .compatible = "fsl,mvf600-fec", .data = &fec_devtype[MVF600_FEC], },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, fec_dt_ids);
@@ -451,7 +451,7 @@
 		netif_device_detach(ndev);
 		napi_disable(&fep->napi);
 		netif_stop_queue(ndev);
-		netif_tx_lock(ndev);
+		netif_tx_lock_bh(ndev);
 	}
 
 	/* Whack a reset.  We should wait for this. */
@@ -616,10 +616,10 @@
 	writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
 
 	if (netif_running(ndev)) {
-		netif_device_attach(ndev);
-		napi_enable(&fep->napi);
+		netif_tx_unlock_bh(ndev);
 		netif_wake_queue(ndev);
-		netif_tx_unlock(ndev);
+		napi_enable(&fep->napi);
+		netif_device_attach(ndev);
 	}
 }
 
diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c
index 576e4b8..083ea2b4 100644
--- a/drivers/net/ethernet/freescale/gianfar_ptp.c
+++ b/drivers/net/ethernet/freescale/gianfar_ptp.c
@@ -524,6 +524,7 @@
 	return 0;
 
 no_clock:
+	iounmap(etsects->regs);
 no_ioremap:
 	release_resource(etsects->rsrc);
 no_resource:
diff --git a/drivers/net/ethernet/icplus/ipg.h b/drivers/net/ethernet/icplus/ipg.h
index 6ce0273..abb300a 100644
--- a/drivers/net/ethernet/icplus/ipg.h
+++ b/drivers/net/ethernet/icplus/ipg.h
@@ -195,57 +195,57 @@
 /* TFD data structure masks. */
 
 /* TFDList, TFC */
-#define	IPG_TFC_RSVD_MASK			0x0000FFFF9FFFFFFF
-#define	IPG_TFC_FRAMEID				0x000000000000FFFF
-#define	IPG_TFC_WORDALIGN			0x0000000000030000
-#define	IPG_TFC_WORDALIGNTODWORD		0x0000000000000000
-#define	IPG_TFC_WORDALIGNTOWORD			0x0000000000020000
-#define	IPG_TFC_WORDALIGNDISABLED		0x0000000000030000
-#define	IPG_TFC_TCPCHECKSUMENABLE		0x0000000000040000
-#define	IPG_TFC_UDPCHECKSUMENABLE		0x0000000000080000
-#define	IPG_TFC_IPCHECKSUMENABLE		0x0000000000100000
-#define	IPG_TFC_FCSAPPENDDISABLE		0x0000000000200000
-#define	IPG_TFC_TXINDICATE			0x0000000000400000
-#define	IPG_TFC_TXDMAINDICATE			0x0000000000800000
-#define	IPG_TFC_FRAGCOUNT			0x000000000F000000
-#define	IPG_TFC_VLANTAGINSERT			0x0000000010000000
-#define	IPG_TFC_TFDDONE				0x0000000080000000
-#define	IPG_TFC_VID				0x00000FFF00000000
-#define	IPG_TFC_CFI				0x0000100000000000
-#define	IPG_TFC_USERPRIORITY			0x0000E00000000000
+#define	IPG_TFC_RSVD_MASK			0x0000FFFF9FFFFFFFULL
+#define	IPG_TFC_FRAMEID				0x000000000000FFFFULL
+#define	IPG_TFC_WORDALIGN			0x0000000000030000ULL
+#define	IPG_TFC_WORDALIGNTODWORD		0x0000000000000000ULL
+#define	IPG_TFC_WORDALIGNTOWORD			0x0000000000020000ULL
+#define	IPG_TFC_WORDALIGNDISABLED		0x0000000000030000ULL
+#define	IPG_TFC_TCPCHECKSUMENABLE		0x0000000000040000ULL
+#define	IPG_TFC_UDPCHECKSUMENABLE		0x0000000000080000ULL
+#define	IPG_TFC_IPCHECKSUMENABLE		0x0000000000100000ULL
+#define	IPG_TFC_FCSAPPENDDISABLE		0x0000000000200000ULL
+#define	IPG_TFC_TXINDICATE			0x0000000000400000ULL
+#define	IPG_TFC_TXDMAINDICATE			0x0000000000800000ULL
+#define	IPG_TFC_FRAGCOUNT			0x000000000F000000ULL
+#define	IPG_TFC_VLANTAGINSERT			0x0000000010000000ULL
+#define	IPG_TFC_TFDDONE				0x0000000080000000ULL
+#define	IPG_TFC_VID				0x00000FFF00000000ULL
+#define	IPG_TFC_CFI				0x0000100000000000ULL
+#define	IPG_TFC_USERPRIORITY			0x0000E00000000000ULL
 
 /* TFDList, FragInfo */
-#define	IPG_TFI_RSVD_MASK			0xFFFF00FFFFFFFFFF
-#define	IPG_TFI_FRAGADDR			0x000000FFFFFFFFFF
-#define	IPG_TFI_FRAGLEN				0xFFFF000000000000LL
+#define	IPG_TFI_RSVD_MASK			0xFFFF00FFFFFFFFFFULL
+#define	IPG_TFI_FRAGADDR			0x000000FFFFFFFFFFULL
+#define	IPG_TFI_FRAGLEN				0xFFFF000000000000ULL
 
 /* RFD data structure masks. */
 
 /* RFDList, RFS */
-#define	IPG_RFS_RSVD_MASK			0x0000FFFFFFFFFFFF
-#define	IPG_RFS_RXFRAMELEN			0x000000000000FFFF
-#define	IPG_RFS_RXFIFOOVERRUN			0x0000000000010000
-#define	IPG_RFS_RXRUNTFRAME			0x0000000000020000
-#define	IPG_RFS_RXALIGNMENTERROR		0x0000000000040000
-#define	IPG_RFS_RXFCSERROR			0x0000000000080000
-#define	IPG_RFS_RXOVERSIZEDFRAME		0x0000000000100000
-#define	IPG_RFS_RXLENGTHERROR			0x0000000000200000
-#define	IPG_RFS_VLANDETECTED			0x0000000000400000
-#define	IPG_RFS_TCPDETECTED			0x0000000000800000
-#define	IPG_RFS_TCPERROR			0x0000000001000000
-#define	IPG_RFS_UDPDETECTED			0x0000000002000000
-#define	IPG_RFS_UDPERROR			0x0000000004000000
-#define	IPG_RFS_IPDETECTED			0x0000000008000000
-#define	IPG_RFS_IPERROR				0x0000000010000000
-#define	IPG_RFS_FRAMESTART			0x0000000020000000
-#define	IPG_RFS_FRAMEEND			0x0000000040000000
-#define	IPG_RFS_RFDDONE				0x0000000080000000
-#define	IPG_RFS_TCI				0x0000FFFF00000000
+#define	IPG_RFS_RSVD_MASK			0x0000FFFFFFFFFFFFULL
+#define	IPG_RFS_RXFRAMELEN			0x000000000000FFFFULL
+#define	IPG_RFS_RXFIFOOVERRUN			0x0000000000010000ULL
+#define	IPG_RFS_RXRUNTFRAME			0x0000000000020000ULL
+#define	IPG_RFS_RXALIGNMENTERROR		0x0000000000040000ULL
+#define	IPG_RFS_RXFCSERROR			0x0000000000080000ULL
+#define	IPG_RFS_RXOVERSIZEDFRAME		0x0000000000100000ULL
+#define	IPG_RFS_RXLENGTHERROR			0x0000000000200000ULL
+#define	IPG_RFS_VLANDETECTED			0x0000000000400000ULL
+#define	IPG_RFS_TCPDETECTED			0x0000000000800000ULL
+#define	IPG_RFS_TCPERROR			0x0000000001000000ULL
+#define	IPG_RFS_UDPDETECTED			0x0000000002000000ULL
+#define	IPG_RFS_UDPERROR			0x0000000004000000ULL
+#define	IPG_RFS_IPDETECTED			0x0000000008000000ULL
+#define	IPG_RFS_IPERROR				0x0000000010000000ULL
+#define	IPG_RFS_FRAMESTART			0x0000000020000000ULL
+#define	IPG_RFS_FRAMEEND			0x0000000040000000ULL
+#define	IPG_RFS_RFDDONE				0x0000000080000000ULL
+#define	IPG_RFS_TCI				0x0000FFFF00000000ULL
 
 /* RFDList, FragInfo */
-#define	IPG_RFI_RSVD_MASK			0xFFFF00FFFFFFFFFF
-#define	IPG_RFI_FRAGADDR			0x000000FFFFFFFFFF
-#define	IPG_RFI_FRAGLEN				0xFFFF000000000000LL
+#define	IPG_RFI_RSVD_MASK			0xFFFF00FFFFFFFFFFULL
+#define	IPG_RFI_FRAGADDR			0x000000FFFFFFFFFFULL
+#define	IPG_RFI_FRAGLEN				0xFFFF000000000000ULL
 
 /* I/O Register masks. */
 
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index d0afeea..2ad1494 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -867,7 +867,7 @@
 	struct netdev_queue *nq = netdev_get_tx_queue(mp->dev, txq->index);
 	int reclaimed;
 
-	__netif_tx_lock(nq, smp_processor_id());
+	__netif_tx_lock_bh(nq);
 
 	reclaimed = 0;
 	while (reclaimed < budget && txq->tx_desc_count > 0) {
@@ -913,7 +913,7 @@
 		dev_kfree_skb(skb);
 	}
 
-	__netif_tx_unlock(nq);
+	__netif_tx_unlock_bh(nq);
 
 	if (reclaimed < budget)
 		mp->work_tx &= ~(1 << txq->index);
@@ -2745,7 +2745,7 @@
 
 	INIT_WORK(&mp->tx_timeout_task, tx_timeout_task);
 
-	netif_napi_add(dev, &mp->napi, mv643xx_eth_poll, 128);
+	netif_napi_add(dev, &mp->napi, mv643xx_eth_poll, NAPI_POLL_WEIGHT);
 
 	init_timer(&mp->rx_oom);
 	mp->rx_oom.data = (unsigned long)mp;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 019c5f7..c1b693c 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -907,8 +907,11 @@
 #define QLCNIC_FW_HANG			0x4000
 #define QLCNIC_FW_LRO_MSS_CAP		0x8000
 #define QLCNIC_TX_INTR_SHARED		0x10000
+#define QLCNIC_APP_CHANGED_FLAGS	0x20000
 #define QLCNIC_IS_MSI_FAMILY(adapter) \
 	((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
+#define QLCNIC_IS_TSO_CAPABLE(adapter)  \
+	((adapter)->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO)
 
 #define QLCNIC_DEF_NUM_STS_DESC_RINGS	4
 #define QLCNIC_MSIX_TBL_SPACE		8192
@@ -1034,6 +1037,7 @@
 	spinlock_t rx_mac_learn_lock;
 	u32 file_prd_off;	/*File fw product offset*/
 	u32 fw_version;
+	u32 offload_flags;
 	const struct firmware *fw;
 };
 
@@ -1542,6 +1546,8 @@
 int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter);
 int qlcnic_read_mac_addr(struct qlcnic_adapter *);
 int qlcnic_setup_netdev(struct qlcnic_adapter *, struct net_device *, int);
+void qlcnic_set_netdev_features(struct qlcnic_adapter *,
+				struct qlcnic_esw_func_cfg *);
 void qlcnic_sriov_vf_schedule_multi(struct net_device *);
 void qlcnic_vf_add_mc_list(struct net_device *, u16);
 
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index c67d1eb..5e7fb1d 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -382,8 +382,6 @@
 	clear_bit(__QLCNIC_RESETTING, &adapter->state);
 	dev_err(&adapter->pdev->dev, "%s:\n", __func__);
 
-	adapter->netdev->trans_start = jiffies;
-
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index 6a6512b..106a12f 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -973,16 +973,57 @@
 	return rc;
 }
 
+static netdev_features_t qlcnic_process_flags(struct qlcnic_adapter *adapter,
+					      netdev_features_t features)
+{
+	u32 offload_flags = adapter->offload_flags;
+
+	if (offload_flags & BIT_0) {
+		features |= NETIF_F_RXCSUM | NETIF_F_IP_CSUM |
+			    NETIF_F_IPV6_CSUM;
+		adapter->rx_csum = 1;
+		if (QLCNIC_IS_TSO_CAPABLE(adapter)) {
+			if (!(offload_flags & BIT_1))
+				features &= ~NETIF_F_TSO;
+			else
+				features |= NETIF_F_TSO;
+
+			if (!(offload_flags & BIT_2))
+				features &= ~NETIF_F_TSO6;
+			else
+				features |= NETIF_F_TSO6;
+		}
+	} else {
+		features &= ~(NETIF_F_RXCSUM |
+			      NETIF_F_IP_CSUM |
+			      NETIF_F_IPV6_CSUM);
+
+		if (QLCNIC_IS_TSO_CAPABLE(adapter))
+			features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+		adapter->rx_csum = 0;
+	}
+
+	return features;
+}
 
 netdev_features_t qlcnic_fix_features(struct net_device *netdev,
 	netdev_features_t features)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	netdev_features_t changed;
 
-	if ((adapter->flags & QLCNIC_ESWITCH_ENABLED) &&
-	    qlcnic_82xx_check(adapter)) {
-		netdev_features_t changed = features ^ netdev->features;
-		features ^= changed & (NETIF_F_ALL_CSUM | NETIF_F_RXCSUM);
+	if (qlcnic_82xx_check(adapter) &&
+	    (adapter->flags & QLCNIC_ESWITCH_ENABLED)) {
+		if (adapter->flags & QLCNIC_APP_CHANGED_FLAGS) {
+			features = qlcnic_process_flags(adapter, features);
+		} else {
+			changed = features ^ netdev->features;
+			features ^= changed & (NETIF_F_RXCSUM |
+					       NETIF_F_IP_CSUM |
+					       NETIF_F_IPV6_CSUM |
+					       NETIF_F_TSO |
+					       NETIF_F_TSO6);
+		}
 	}
 
 	if (!(features & NETIF_F_RXCSUM))
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 8fb836d..aeb26a85 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -84,14 +84,9 @@
 static void qlcnic_free_lb_filters_mem(struct qlcnic_adapter *adapter);
 static void qlcnic_dev_set_npar_ready(struct qlcnic_adapter *);
 static int qlcnicvf_start_firmware(struct qlcnic_adapter *);
-static void qlcnic_set_netdev_features(struct qlcnic_adapter *,
-				struct qlcnic_esw_func_cfg *);
 static int qlcnic_vlan_rx_add(struct net_device *, __be16, u16);
 static int qlcnic_vlan_rx_del(struct net_device *, __be16, u16);
 
-#define QLCNIC_IS_TSO_CAPABLE(adapter)	\
-	((adapter)->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO)
-
 static u32 qlcnic_vlan_tx_check(struct qlcnic_adapter *adapter)
 {
 	struct qlcnic_hardware_context *ahw = adapter->ahw;
@@ -1074,8 +1069,6 @@
 
 	if (!esw_cfg->promisc_mode)
 		adapter->flags |= QLCNIC_PROMISC_DISABLED;
-
-	qlcnic_set_netdev_features(adapter, esw_cfg);
 }
 
 int qlcnic_set_eswitch_port_config(struct qlcnic_adapter *adapter)
@@ -1090,51 +1083,23 @@
 			return -EIO;
 	qlcnic_set_vlan_config(adapter, &esw_cfg);
 	qlcnic_set_eswitch_port_features(adapter, &esw_cfg);
+	qlcnic_set_netdev_features(adapter, &esw_cfg);
 
 	return 0;
 }
 
-static void
-qlcnic_set_netdev_features(struct qlcnic_adapter *adapter,
-		struct qlcnic_esw_func_cfg *esw_cfg)
+void qlcnic_set_netdev_features(struct qlcnic_adapter *adapter,
+				struct qlcnic_esw_func_cfg *esw_cfg)
 {
 	struct net_device *netdev = adapter->netdev;
-	unsigned long features, vlan_features;
 
 	if (qlcnic_83xx_check(adapter))
 		return;
 
-	features = (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
-		    NETIF_F_IPV6_CSUM | NETIF_F_GRO);
-	vlan_features = (NETIF_F_SG | NETIF_F_IP_CSUM |
-			NETIF_F_IPV6_CSUM);
-
-	if (QLCNIC_IS_TSO_CAPABLE(adapter)) {
-		features |= (NETIF_F_TSO | NETIF_F_TSO6);
-		vlan_features |= (NETIF_F_TSO | NETIF_F_TSO6);
-	}
-
-	if (netdev->features & NETIF_F_LRO)
-		features |= NETIF_F_LRO;
-
-	if (esw_cfg->offload_flags & BIT_0) {
-		netdev->features |= features;
-		adapter->rx_csum = 1;
-		if (!(esw_cfg->offload_flags & BIT_1)) {
-			netdev->features &= ~NETIF_F_TSO;
-			features &= ~NETIF_F_TSO;
-		}
-		if (!(esw_cfg->offload_flags & BIT_2)) {
-			netdev->features &= ~NETIF_F_TSO6;
-			features &= ~NETIF_F_TSO6;
-		}
-	} else {
-		netdev->features &= ~features;
-		features &= ~features;
-		adapter->rx_csum = 0;
-	}
-
-	netdev->vlan_features = (features & vlan_features);
+	adapter->offload_flags = esw_cfg->offload_flags;
+	adapter->flags |= QLCNIC_APP_CHANGED_FLAGS;
+	netdev_update_features(netdev);
+	adapter->flags &= ~QLCNIC_APP_CHANGED_FLAGS;
 }
 
 static int
@@ -2016,8 +1981,10 @@
 	pci_enable_pcie_error_reporting(pdev);
 
 	ahw = kzalloc(sizeof(struct qlcnic_hardware_context), GFP_KERNEL);
-	if (!ahw)
+	if (!ahw) {
+		err = -ENOMEM;
 		goto err_out_free_res;
+	}
 
 	switch (ent->device) {
 	case PCI_DEVICE_ID_QLOGIC_QLE824X:
@@ -2053,6 +2020,7 @@
 
 	adapter->qlcnic_wq = create_singlethread_workqueue("qlcnic");
 	if (adapter->qlcnic_wq == NULL) {
+		err = -ENOMEM;
 		dev_err(&pdev->dev, "Failed to create workqueue\n");
 		goto err_out_free_netdev;
 	}
@@ -2133,6 +2101,10 @@
 			goto err_out_disable_msi;
 	}
 
+	err = qlcnic_get_act_pci_func(adapter);
+	if (err)
+		goto err_out_disable_mbx_intr;
+
 	err = qlcnic_setup_netdev(adapter, netdev, pci_using_dac);
 	if (err)
 		goto err_out_disable_mbx_intr;
@@ -2162,9 +2134,6 @@
 		break;
 	}
 
-	if (qlcnic_get_act_pci_func(adapter))
-		goto err_out_disable_mbx_intr;
-
 	if (adapter->drv_mac_learn)
 		qlcnic_alloc_lb_filters_mem(adapter);
 
@@ -3149,10 +3118,8 @@
 		if (adapter->need_fw_reset)
 			goto detach;
 
-		if (adapter->ahw->reset_context && qlcnic_auto_fw_reset) {
+		if (adapter->ahw->reset_context && qlcnic_auto_fw_reset)
 			qlcnic_reset_hw_context(adapter);
-			adapter->netdev->trans_start = jiffies;
-		}
 
 		return 0;
 	}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
index 3869c38..196b2d1 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
@@ -1734,7 +1734,6 @@
 
 	if (!qlcnic_sriov_vf_reinit_driver(adapter)) {
 		qlcnic_sriov_vf_attach(adapter);
-		adapter->netdev->trans_start = jiffies;
 		adapter->tx_timeo_cnt = 0;
 		adapter->reset_ctx_cnt = 0;
 		adapter->fw_fail_cnt = 0;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
index 4e22e79..e7a2fe2 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
@@ -544,6 +544,9 @@
 		switch (esw_cfg[i].op_mode) {
 		case QLCNIC_PORT_DEFAULTS:
 			qlcnic_set_eswitch_port_features(adapter, &esw_cfg[i]);
+			rtnl_lock();
+			qlcnic_set_netdev_features(adapter, &esw_cfg[i]);
+			rtnl_unlock();
 			break;
 		case QLCNIC_ADD_VLAN:
 			qlcnic_set_vlan_config(adapter, &esw_cfg[i]);
diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 7d1fb9a..0352345 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -1136,6 +1136,7 @@
 			cp->dev->stats.tx_dropped++;
 		}
 	}
+	netdev_reset_queue(cp->dev);
 
 	memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE);
 	memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 79c520b..393f961 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -5856,7 +5856,20 @@
 	return -EIO;
 }
 
-static inline void rtl8169_tso_csum(struct rtl8169_private *tp,
+static bool rtl_skb_pad(struct sk_buff *skb)
+{
+	if (skb_padto(skb, ETH_ZLEN))
+		return false;
+	skb_put(skb, ETH_ZLEN - skb->len);
+	return true;
+}
+
+static bool rtl_test_hw_pad_bug(struct rtl8169_private *tp, struct sk_buff *skb)
+{
+	return skb->len < ETH_ZLEN && tp->mac_version == RTL_GIGA_MAC_VER_34;
+}
+
+static inline bool rtl8169_tso_csum(struct rtl8169_private *tp,
 				    struct sk_buff *skb, u32 *opts)
 {
 	const struct rtl_tx_desc_info *info = tx_desc_info + tp->txd_version;
@@ -5869,13 +5882,20 @@
 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		const struct iphdr *ip = ip_hdr(skb);
 
+		if (unlikely(rtl_test_hw_pad_bug(tp, skb)))
+			return skb_checksum_help(skb) == 0 && rtl_skb_pad(skb);
+
 		if (ip->protocol == IPPROTO_TCP)
 			opts[offset] |= info->checksum.tcp;
 		else if (ip->protocol == IPPROTO_UDP)
 			opts[offset] |= info->checksum.udp;
 		else
 			WARN_ON_ONCE(1);
+	} else {
+		if (unlikely(rtl_test_hw_pad_bug(tp, skb)))
+			return rtl_skb_pad(skb);
 	}
+	return true;
 }
 
 static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
@@ -5896,17 +5916,15 @@
 		goto err_stop_0;
 	}
 
-	/* 8168evl does not automatically pad to minimum length. */
-	if (unlikely(tp->mac_version == RTL_GIGA_MAC_VER_34 &&
-		     skb->len < ETH_ZLEN)) {
-		if (skb_padto(skb, ETH_ZLEN))
-			goto err_update_stats;
-		skb_put(skb, ETH_ZLEN - skb->len);
-	}
-
 	if (unlikely(le32_to_cpu(txd->opts1) & DescOwn))
 		goto err_stop_0;
 
+	opts[1] = cpu_to_le32(rtl8169_tx_vlan_tag(skb));
+	opts[0] = DescOwn;
+
+	if (!rtl8169_tso_csum(tp, skb, opts))
+		goto err_update_stats;
+
 	len = skb_headlen(skb);
 	mapping = dma_map_single(d, skb->data, len, DMA_TO_DEVICE);
 	if (unlikely(dma_mapping_error(d, mapping))) {
@@ -5918,11 +5936,6 @@
 	tp->tx_skb[entry].len = len;
 	txd->addr = cpu_to_le64(mapping);
 
-	opts[1] = cpu_to_le32(rtl8169_tx_vlan_tag(skb));
-	opts[0] = DescOwn;
-
-	rtl8169_tso_csum(tp, skb, opts);
-
 	frags = rtl8169_xmit_frags(tp, skb, opts);
 	if (frags < 0)
 		goto err_dma_1;
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 01b9920..39e4cb3 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -638,14 +638,16 @@
 			   EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
 			   efx->type->rx_buffer_padding);
 	rx_buf_len = (sizeof(struct efx_rx_page_state) +
-		      EFX_PAGE_IP_ALIGN + efx->rx_dma_len);
+		      NET_IP_ALIGN + efx->rx_dma_len);
 	if (rx_buf_len <= PAGE_SIZE) {
 		efx->rx_scatter = false;
 		efx->rx_buffer_order = 0;
 	} else if (efx->type->can_rx_scatter) {
+		BUILD_BUG_ON(EFX_RX_USR_BUF_SIZE % L1_CACHE_BYTES);
 		BUILD_BUG_ON(sizeof(struct efx_rx_page_state) +
-			     EFX_PAGE_IP_ALIGN + EFX_RX_USR_BUF_SIZE >
-			     PAGE_SIZE / 2);
+			     2 * ALIGN(NET_IP_ALIGN + EFX_RX_USR_BUF_SIZE,
+				       EFX_RX_BUF_ALIGNMENT) >
+			     PAGE_SIZE);
 		efx->rx_scatter = true;
 		efx->rx_dma_len = EFX_RX_USR_BUF_SIZE;
 		efx->rx_buffer_order = 0;
diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h
index 9bd433a..39d6bd77 100644
--- a/drivers/net/ethernet/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
@@ -72,8 +72,20 @@
 /* Maximum possible MTU the driver supports */
 #define EFX_MAX_MTU (9 * 1024)
 
-/* Size of an RX scatter buffer.  Small enough to pack 2 into a 4K page. */
-#define EFX_RX_USR_BUF_SIZE 1824
+/* Size of an RX scatter buffer.  Small enough to pack 2 into a 4K page,
+ * and should be a multiple of the cache line size.
+ */
+#define EFX_RX_USR_BUF_SIZE	(2048 - 256)
+
+/* If possible, we should ensure cache line alignment at start and end
+ * of every buffer.  Otherwise, we just need to ensure 4-byte
+ * alignment of the network header.
+ */
+#if NET_IP_ALIGN == 0
+#define EFX_RX_BUF_ALIGNMENT	L1_CACHE_BYTES
+#else
+#define EFX_RX_BUF_ALIGNMENT	4
+#endif
 
 /* Forward declare Precision Time Protocol (PTP) support structure. */
 struct efx_ptp_data;
@@ -468,24 +480,11 @@
 };
 
 /*
- * Alignment of page-allocated RX buffers
- *
- * Controls the number of bytes inserted at the start of an RX buffer.
- * This is the equivalent of NET_IP_ALIGN [which controls the alignment
- * of the skb->head for hardware DMA].
- */
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-#define EFX_PAGE_IP_ALIGN 0
-#else
-#define EFX_PAGE_IP_ALIGN NET_IP_ALIGN
-#endif
-
-/*
  * Alignment of the skb->head which wraps a page-allocated RX buffer
  *
  * The skb allocated to wrap an rx_buffer can have this alignment. Since
  * the data is memcpy'd from the rx_buf, it does not need to be equal to
- * EFX_PAGE_IP_ALIGN.
+ * NET_IP_ALIGN.
  */
 #define EFX_PAGE_SKB_ALIGN 2
 
diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c
index e73e30b..a7dfe36 100644
--- a/drivers/net/ethernet/sfc/rx.c
+++ b/drivers/net/ethernet/sfc/rx.c
@@ -93,8 +93,8 @@
 
 void efx_rx_config_page_split(struct efx_nic *efx)
 {
-	efx->rx_page_buf_step = ALIGN(efx->rx_dma_len + EFX_PAGE_IP_ALIGN,
-				      L1_CACHE_BYTES);
+	efx->rx_page_buf_step = ALIGN(efx->rx_dma_len + NET_IP_ALIGN,
+				      EFX_RX_BUF_ALIGNMENT);
 	efx->rx_bufs_per_page = efx->rx_buffer_order ? 1 :
 		((PAGE_SIZE - sizeof(struct efx_rx_page_state)) /
 		 efx->rx_page_buf_step);
@@ -188,9 +188,9 @@
 		do {
 			index = rx_queue->added_count & rx_queue->ptr_mask;
 			rx_buf = efx_rx_buffer(rx_queue, index);
-			rx_buf->dma_addr = dma_addr + EFX_PAGE_IP_ALIGN;
+			rx_buf->dma_addr = dma_addr + NET_IP_ALIGN;
 			rx_buf->page = page;
-			rx_buf->page_offset = page_offset + EFX_PAGE_IP_ALIGN;
+			rx_buf->page_offset = page_offset + NET_IP_ALIGN;
 			rx_buf->len = efx->rx_dma_len;
 			rx_buf->flags = 0;
 			++rx_queue->added_count;
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index cf887c2..86adfa0 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -582,6 +582,7 @@
 	{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)},	/* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
 	{QMI_FIXED_INTF(0x2357, 0x0201, 4)},	/* TP-LINK HSUPA Modem MA180 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
+	{QMI_FIXED_INTF(0x1e2d, 0x12d1, 4)},	/* Cinterion PLxx */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index a491d3a..6cbdac6 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -130,19 +130,23 @@
 	struct usb_device *udev;
 	struct tasklet_struct tl;
 	struct net_device *netdev;
-	struct urb *rx_urb, *tx_urb, *intr_urb, *ctrl_urb;
+	struct urb *rx_urb, *tx_urb, *intr_urb;
 	struct sk_buff *tx_skb, *rx_skb;
 	struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE];
 	spinlock_t rx_pool_lock;
 	struct usb_ctrlrequest dr;
 	int intr_interval;
-	__le16 rx_creg;
 	u8 *intr_buff;
 	u8 phy;
 };
 
 typedef struct rtl8150 rtl8150_t;
 
+struct async_req {
+	struct usb_ctrlrequest dr;
+	u16 rx_creg;
+};
+
 static const char driver_name [] = "rtl8150";
 
 /*
@@ -164,51 +168,47 @@
 			       indx, 0, data, size, 500);
 }
 
-static void ctrl_callback(struct urb *urb)
+static void async_set_reg_cb(struct urb *urb)
 {
-	rtl8150_t *dev;
+	struct async_req *req = (struct async_req *)urb->context;
 	int status = urb->status;
 
-	switch (status) {
-	case 0:
-		break;
-	case -EINPROGRESS:
-		break;
-	case -ENOENT:
-		break;
-	default:
-		if (printk_ratelimit())
-			dev_warn(&urb->dev->dev, "ctrl urb status %d\n", status);
-	}
-	dev = urb->context;
-	clear_bit(RX_REG_SET, &dev->flags);
+	if (status < 0)
+		dev_dbg(&urb->dev->dev, "%s failed with %d", __func__, status);
+	kfree(req);
+	usb_free_urb(urb);
 }
 
-static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size)
+static int async_set_registers(rtl8150_t *dev, u16 indx, u16 size, u16 reg)
 {
-	int ret;
+	int res = -ENOMEM;
+	struct urb *async_urb;
+	struct async_req *req;
 
-	if (test_bit(RX_REG_SET, &dev->flags))
-		return -EAGAIN;
-
-	dev->dr.bRequestType = RTL8150_REQT_WRITE;
-	dev->dr.bRequest = RTL8150_REQ_SET_REGS;
-	dev->dr.wValue = cpu_to_le16(indx);
-	dev->dr.wIndex = 0;
-	dev->dr.wLength = cpu_to_le16(size);
-	dev->ctrl_urb->transfer_buffer_length = size;
-	usb_fill_control_urb(dev->ctrl_urb, dev->udev,
-			 usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr,
-			 &dev->rx_creg, size, ctrl_callback, dev);
-	if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) {
-		if (ret == -ENODEV)
+	req = kmalloc(sizeof(struct async_req), GFP_ATOMIC);
+	if (req == NULL)
+		return res;
+	async_urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (async_urb == NULL) {
+		kfree(req);
+		return res;
+	}
+	req->rx_creg = cpu_to_le16(reg);
+	req->dr.bRequestType = RTL8150_REQT_WRITE;
+	req->dr.bRequest = RTL8150_REQ_SET_REGS;
+	req->dr.wIndex = 0;
+	req->dr.wValue = cpu_to_le16(indx);
+	req->dr.wLength = cpu_to_le16(size);
+	usb_fill_control_urb(async_urb, dev->udev,
+	                     usb_sndctrlpipe(dev->udev, 0), (void *)&req->dr,
+			     &req->rx_creg, size, async_set_reg_cb, req);
+	res = usb_submit_urb(async_urb, GFP_ATOMIC);
+	if (res) {
+		if (res == -ENODEV)
 			netif_device_detach(dev->netdev);
-		dev_err(&dev->udev->dev,
-			"control request submission failed: %d\n", ret);
-	} else
-		set_bit(RX_REG_SET, &dev->flags);
-
-	return ret;
+		dev_err(&dev->udev->dev, "%s failed with %d\n", __func__, res);
+	}
+	return res;
 }
 
 static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg)
@@ -330,13 +330,6 @@
 		usb_free_urb(dev->tx_urb);
 		return 0;
 	}
-	dev->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!dev->ctrl_urb) {
-		usb_free_urb(dev->rx_urb);
-		usb_free_urb(dev->tx_urb);
-		usb_free_urb(dev->intr_urb);
-		return 0;
-	}
 
 	return 1;
 }
@@ -346,7 +339,6 @@
 	usb_free_urb(dev->rx_urb);
 	usb_free_urb(dev->tx_urb);
 	usb_free_urb(dev->intr_urb);
-	usb_free_urb(dev->ctrl_urb);
 }
 
 static void unlink_all_urbs(rtl8150_t * dev)
@@ -354,7 +346,6 @@
 	usb_kill_urb(dev->rx_urb);
 	usb_kill_urb(dev->tx_urb);
 	usb_kill_urb(dev->intr_urb);
-	usb_kill_urb(dev->ctrl_urb);
 }
 
 static inline struct sk_buff *pull_skb(rtl8150_t *dev)
@@ -629,7 +620,6 @@
 	}
 	/* RCR bit7=1 attach Rx info at the end;  =0 HW CRC (which is broken) */
 	rcr = 0x9e;
-	dev->rx_creg = cpu_to_le16(rcr);
 	tcr = 0xd8;
 	cr = 0x0c;
 	if (!(rcr & 0x80))
@@ -662,20 +652,22 @@
 static void rtl8150_set_multicast(struct net_device *netdev)
 {
 	rtl8150_t *dev = netdev_priv(netdev);
+	u16 rx_creg = 0x9e;
+
 	netif_stop_queue(netdev);
 	if (netdev->flags & IFF_PROMISC) {
-		dev->rx_creg |= cpu_to_le16(0x0001);
+		rx_creg |= 0x0001;
 		dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name);
 	} else if (!netdev_mc_empty(netdev) ||
 		   (netdev->flags & IFF_ALLMULTI)) {
-		dev->rx_creg &= cpu_to_le16(0xfffe);
-		dev->rx_creg |= cpu_to_le16(0x0002);
+		rx_creg &= 0xfffe;
+		rx_creg |= 0x0002;
 		dev_info(&netdev->dev, "%s: allmulti set\n", netdev->name);
 	} else {
 		/* ~RX_MULTICAST, ~RX_PROMISCUOUS */
-		dev->rx_creg &= cpu_to_le16(0x00fc);
+		rx_creg &= 0x00fc;
 	}
-	async_set_registers(dev, RCR, 2);
+	async_set_registers(dev, RCR, sizeof(rx_creg), rx_creg);
 	netif_wake_queue(netdev);
 }
 
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f95cb03..06ee82f 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1477,7 +1477,7 @@
 
 	/* usbnet already took usb runtime pm, so have to enable the feature
 	 * for usb interface, otherwise usb_autopm_get_interface may return
-	 * failure if USB_SUSPEND(RUNTIME_PM) is enabled.
+	 * failure if RUNTIME_PM is enabled.
 	 */
 	if (!driver->supports_autosuspend) {
 		driver->supports_autosuspend = 1;
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 655bb25..c9e0038 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -636,10 +636,11 @@
 	struct virtnet_info *vi = netdev_priv(dev);
 	int i;
 
-	for (i = 0; i < vi->curr_queue_pairs; i++) {
-		/* Make sure we have some buffers: if oom use wq. */
-		if (!try_fill_recv(&vi->rq[i], GFP_KERNEL))
-			schedule_delayed_work(&vi->refill, 0);
+	for (i = 0; i < vi->max_queue_pairs; i++) {
+		if (i < vi->curr_queue_pairs)
+			/* Make sure we have some buffers: if oom use wq. */
+			if (!try_fill_recv(&vi->rq[i], GFP_KERNEL))
+				schedule_delayed_work(&vi->refill, 0);
 		virtnet_napi_enable(&vi->rq[i]);
 	}
 
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index ba81f3c..3b1d2ee 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -301,7 +301,7 @@
 }
 
 /* Look up Ethernet address in forwarding table */
-static struct vxlan_fdb *vxlan_find_mac(struct vxlan_dev *vxlan,
+static struct vxlan_fdb *__vxlan_find_mac(struct vxlan_dev *vxlan,
 					const u8 *mac)
 
 {
@@ -316,6 +316,18 @@
 	return NULL;
 }
 
+static struct vxlan_fdb *vxlan_find_mac(struct vxlan_dev *vxlan,
+					const u8 *mac)
+{
+	struct vxlan_fdb *f;
+
+	f = __vxlan_find_mac(vxlan, mac);
+	if (f)
+		f->used = jiffies;
+
+	return f;
+}
+
 /* Add/update destinations for multicast */
 static int vxlan_fdb_append(struct vxlan_fdb *f,
 			    __be32 ip, __be16 port, __u32 vni, __u32 ifindex)
@@ -353,7 +365,7 @@
 	struct vxlan_fdb *f;
 	int notify = 0;
 
-	f = vxlan_find_mac(vxlan, mac);
+	f = __vxlan_find_mac(vxlan, mac);
 	if (f) {
 		if (flags & NLM_F_EXCL) {
 			netdev_dbg(vxlan->dev,
@@ -563,7 +575,6 @@
 
 	f = vxlan_find_mac(vxlan, src_mac);
 	if (likely(f)) {
-		f->used = jiffies;
 		if (likely(f->remote.remote_ip == src_ip))
 			return;
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 639ba7d..6988e1d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -965,7 +965,7 @@
 {
 	int i;
 
-	if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah))
+	if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah) && !AR_SREV_9485(ah))
 		return;
 
 	for (i = 0; i < AR9300_MAX_CHAINS; i++) {
diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
index 712f415..88ff1d7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
@@ -1020,7 +1020,7 @@
 	{0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0},
 	{0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18},
 	{0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982},
 	{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
 	{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 8a1888d..366002f 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -254,6 +254,7 @@
 	int sched;
 	int paused;
 	u8 state;
+	bool stop_cb;
 };
 
 struct ath_node {
@@ -351,7 +352,8 @@
 void ath_tx_edma_tasklet(struct ath_softc *sc);
 int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
 		      u16 tid, u16 *ssn);
-void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
+bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid,
+		      bool flush);
 void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
 
 void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an);
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index e6307b8..b37eb8d 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -2008,6 +2008,14 @@
 	WARN_ON(i != ATH9K_SSTATS_LEN);
 }
 
+void ath9k_deinit_debug(struct ath_softc *sc)
+{
+	if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) {
+		relay_close(sc->rfs_chan_spec_scan);
+		sc->rfs_chan_spec_scan = NULL;
+	}
+}
+
 int ath9k_init_debug(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index 794a7ec..9d49aab 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -304,6 +304,7 @@
 };
 
 int ath9k_init_debug(struct ath_hw *ah);
+void ath9k_deinit_debug(struct ath_softc *sc);
 
 void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status);
 void ath_debug_stat_tx(struct ath_softc *sc, struct ath_buf *bf,
@@ -339,6 +340,10 @@
 	return 0;
 }
 
+static inline void ath9k_deinit_debug(struct ath_softc *sc)
+{
+}
+
 static inline void ath_debug_stat_interrupt(struct ath_softc *sc,
 					    enum ath9k_int status)
 {
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 0237b28..aba4151 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -906,7 +906,7 @@
 	if (!ath_is_world_regd(reg)) {
 		error = regulatory_hint(hw->wiphy, reg->alpha2);
 		if (error)
-			goto unregister;
+			goto debug_cleanup;
 	}
 
 	ath_init_leds(sc);
@@ -914,6 +914,8 @@
 
 	return 0;
 
+debug_cleanup:
+	ath9k_deinit_debug(sc);
 unregister:
 	ieee80211_unregister_hw(hw);
 rx_cleanup:
@@ -942,11 +944,6 @@
 		sc->dfs_detector->exit(sc->dfs_detector);
 
 	ath9k_eeprom_release(sc);
-
-	if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) {
-		relay_close(sc->rfs_chan_spec_scan);
-		sc->rfs_chan_spec_scan = NULL;
-	}
 }
 
 void ath9k_deinit_device(struct ath_softc *sc)
@@ -960,6 +957,7 @@
 
 	ath9k_ps_restore(sc);
 
+	ath9k_deinit_debug(sc);
 	ieee80211_unregister_hw(hw);
 	ath_rx_cleanup(sc);
 	ath9k_deinit_softc(sc);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index a18414b..2382d12 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1687,6 +1687,7 @@
 			      u16 tid, u16 *ssn, u8 buf_size)
 {
 	struct ath_softc *sc = hw->priv;
+	bool flush = false;
 	int ret = 0;
 
 	local_bh_disable();
@@ -1703,12 +1704,13 @@
 			ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 		ath9k_ps_restore(sc);
 		break;
-	case IEEE80211_AMPDU_TX_STOP_CONT:
 	case IEEE80211_AMPDU_TX_STOP_FLUSH:
 	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
+		flush = true;
+	case IEEE80211_AMPDU_TX_STOP_CONT:
 		ath9k_ps_wakeup(sc);
-		ath_tx_aggr_stop(sc, sta, tid);
-		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		if (ath_tx_aggr_stop(sc, sta, tid, flush))
+			ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 		ath9k_ps_restore(sc);
 		break;
 	case IEEE80211_AMPDU_TX_OPERATIONAL:
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index eab0fcb..14bb335 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -164,7 +164,20 @@
 			       ARRAY_SIZE(bf->rates));
 }
 
-static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
+static void ath_tx_clear_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
+{
+	tid->state &= ~AGGR_ADDBA_COMPLETE;
+	tid->state &= ~AGGR_CLEANUP;
+	if (!tid->stop_cb)
+		return;
+
+	ieee80211_start_tx_ba_cb_irqsafe(tid->an->vif, tid->an->sta->addr,
+					 tid->tidno);
+	tid->stop_cb = false;
+}
+
+static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid,
+			     bool flush_packets)
 {
 	struct ath_txq *txq = tid->ac->txq;
 	struct sk_buff *skb;
@@ -181,16 +194,15 @@
 	while ((skb = __skb_dequeue(&tid->buf_q))) {
 		fi = get_frame_info(skb);
 		bf = fi->bf;
+		if (!bf && !flush_packets)
+			bf = ath_tx_setup_buffer(sc, txq, tid, skb);
 
 		if (!bf) {
-			bf = ath_tx_setup_buffer(sc, txq, tid, skb);
-			if (!bf) {
-				ieee80211_free_txskb(sc->hw, skb);
-				continue;
-			}
+			ieee80211_free_txskb(sc->hw, skb);
+			continue;
 		}
 
-		if (fi->retries) {
+		if (fi->retries || flush_packets) {
 			list_add_tail(&bf->list, &bf_head);
 			ath_tx_update_baw(sc, tid, bf->bf_state.seqno);
 			ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0);
@@ -201,12 +213,10 @@
 		}
 	}
 
-	if (tid->baw_head == tid->baw_tail) {
-		tid->state &= ~AGGR_ADDBA_COMPLETE;
-		tid->state &= ~AGGR_CLEANUP;
-	}
+	if (tid->baw_head == tid->baw_tail)
+		ath_tx_clear_tid(sc, tid);
 
-	if (sendbar) {
+	if (sendbar && !flush_packets) {
 		ath_txq_unlock(sc, txq);
 		ath_send_bar(tid, tid->seq_start);
 		ath_txq_lock(sc, txq);
@@ -277,9 +287,7 @@
 
 		list_add_tail(&bf->list, &bf_head);
 
-		if (fi->retries)
-			ath_tx_update_baw(sc, tid, bf->bf_state.seqno);
-
+		ath_tx_update_baw(sc, tid, bf->bf_state.seqno);
 		ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0);
 	}
 
@@ -602,7 +610,7 @@
 	}
 
 	if (tid->state & AGGR_CLEANUP)
-		ath_tx_flush_tid(sc, tid);
+		ath_tx_flush_tid(sc, tid, false);
 
 	rcu_read_unlock();
 
@@ -620,6 +628,7 @@
 				  struct ath_tx_status *ts, struct ath_buf *bf,
 				  struct list_head *bf_head)
 {
+	struct ieee80211_tx_info *info;
 	bool txok, flush;
 
 	txok = !(ts->ts_status & ATH9K_TXERR_MASK);
@@ -631,8 +640,12 @@
 		txq->axq_ampdu_depth--;
 
 	if (!bf_isampdu(bf)) {
-		if (!flush)
+		if (!flush) {
+			info = IEEE80211_SKB_CB(bf->bf_mpdu);
+			memcpy(info->control.rates, bf->rates,
+			       sizeof(info->control.rates));
 			ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok);
+		}
 		ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok);
 	} else
 		ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok);
@@ -676,7 +689,7 @@
 
 	skb = bf->bf_mpdu;
 	tx_info = IEEE80211_SKB_CB(skb);
-	rates = tx_info->control.rates;
+	rates = bf->rates;
 
 	/*
 	 * Find the lowest frame length among the rate series that will have a
@@ -1256,18 +1269,23 @@
 	return 0;
 }
 
-void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
+bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid,
+		      bool flush)
 {
 	struct ath_node *an = (struct ath_node *)sta->drv_priv;
 	struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid);
 	struct ath_txq *txq = txtid->ac->txq;
+	bool ret = !flush;
+
+	if (flush)
+		txtid->stop_cb = false;
 
 	if (txtid->state & AGGR_CLEANUP)
-		return;
+		return false;
 
 	if (!(txtid->state & AGGR_ADDBA_COMPLETE)) {
 		txtid->state &= ~AGGR_ADDBA_PROGRESS;
-		return;
+		return ret;
 	}
 
 	ath_txq_lock(sc, txq);
@@ -1279,13 +1297,17 @@
 	 * TID can only be reused after all in-progress subframes have been
 	 * completed.
 	 */
-	if (txtid->baw_head != txtid->baw_tail)
+	if (txtid->baw_head != txtid->baw_tail) {
 		txtid->state |= AGGR_CLEANUP;
-	else
+		ret = false;
+		txtid->stop_cb = !flush;
+	} else {
 		txtid->state &= ~AGGR_ADDBA_COMPLETE;
+	}
 
-	ath_tx_flush_tid(sc, txtid);
+	ath_tx_flush_tid(sc, txtid, flush);
 	ath_txq_unlock_complete(sc, txq);
+	return ret;
 }
 
 void ath_tx_aggr_sleep(struct ieee80211_sta *sta, struct ath_softc *sc,
@@ -2415,6 +2437,7 @@
 		tid->ac = &an->ac[acno];
 		tid->state &= ~AGGR_ADDBA_COMPLETE;
 		tid->state &= ~AGGR_ADDBA_PROGRESS;
+		tid->stop_cb = false;
 	}
 
 	for (acno = 0, ac = &an->ac[acno];
@@ -2451,8 +2474,7 @@
 		}
 
 		ath_tid_drain(sc, txq, tid);
-		tid->state &= ~AGGR_ADDBA_COMPLETE;
-		tid->state &= ~AGGR_CLEANUP;
+		ath_tx_clear_tid(sc, tid);
 
 		ath_txq_unlock(sc, txq);
 	}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 6d758f2..761f501 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -4140,6 +4140,10 @@
 		.types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
 			 BIT(NL80211_IFTYPE_P2P_GO)
 	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_P2P_DEVICE)
+	}
 };
 static const struct ieee80211_iface_combination brcmf_iface_combos[] = {
 	{
@@ -4197,7 +4201,8 @@
 				 BIT(NL80211_IFTYPE_ADHOC) |
 				 BIT(NL80211_IFTYPE_AP) |
 				 BIT(NL80211_IFTYPE_P2P_CLIENT) |
-				 BIT(NL80211_IFTYPE_P2P_GO);
+				 BIT(NL80211_IFTYPE_P2P_GO) |
+				 BIT(NL80211_IFTYPE_P2P_DEVICE);
 	wiphy->iface_combinations = brcmf_iface_combos;
 	wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos);
 	wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz;
diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c
index 592d0aa..e9a3cbc 100644
--- a/drivers/net/wireless/iwlegacy/common.c
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -1423,7 +1423,7 @@
 }
 EXPORT_SYMBOL(il_setup_rx_scan_handlers);
 
-inline u16
+u16
 il_get_active_dwell_time(struct il_priv *il, enum ieee80211_band band,
 			 u8 n_probes)
 {
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 191dcae..c638455 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -173,6 +173,8 @@
 	REPLY_DEBUG_CMD = 0xf0,
 	DEBUG_LOG_MSG = 0xf7,
 
+	MCAST_FILTER_CMD = 0xd0,
+
 	/* D3 commands/notifications */
 	D3_CONFIG_CMD = 0xd3,
 	PROT_OFFLOAD_CONFIG_CMD = 0xd4,
@@ -948,4 +950,29 @@
 	u8 data[0];
 } __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */
 
+#define MAX_PORT_ID_NUM	2
+
+/**
+ * struct iwl_mcast_filter_cmd - configure multicast filter.
+ * @filter_own: Set 1 to filter out multicast packets sent by station itself
+ * @port_id:	Multicast MAC addresses array specifier. This is a strange way
+ *		to identify network interface adopted in host-device IF.
+ *		It is used by FW as index in array of addresses. This array has
+ *		MAX_PORT_ID_NUM members.
+ * @count:	Number of MAC addresses in the array
+ * @pass_all:	Set 1 to pass all multicast packets.
+ * @bssid:	current association BSSID.
+ * @addr_list:	Place holder for array of MAC addresses.
+ *		IMPORTANT: add padding if necessary to ensure DWORD alignment.
+ */
+struct iwl_mcast_filter_cmd {
+	u8 filter_own;
+	u8 port_id;
+	u8 count;
+	u8 pass_all;
+	u8 bssid[6];
+	u8 reserved[2];
+	u8 addr_list[0];
+} __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */
+
 #endif /* __fw_api_h__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
index e6eca4d..b2cc3d9 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
@@ -586,10 +586,12 @@
  */
 static void iwl_mvm_mac_ctxt_cmd_fill_sta(struct iwl_mvm *mvm,
 					  struct ieee80211_vif *vif,
-					  struct iwl_mac_data_sta *ctxt_sta)
+					  struct iwl_mac_data_sta *ctxt_sta,
+					  bool force_assoc_off)
 {
 	/* We need the dtim_period to set the MAC as associated */
-	if (vif->bss_conf.assoc && vif->bss_conf.dtim_period) {
+	if (vif->bss_conf.assoc && vif->bss_conf.dtim_period &&
+	    !force_assoc_off) {
 		u32 dtim_offs;
 
 		/*
@@ -659,7 +661,8 @@
 		cmd.filter_flags &= ~cpu_to_le32(MAC_FILTER_IN_BEACON);
 
 	/* Fill the data specific for station mode */
-	iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.sta);
+	iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.sta,
+				      action == FW_CTXT_ACTION_ADD);
 
 	return iwl_mvm_mac_ctxt_send_cmd(mvm, &cmd);
 }
@@ -677,7 +680,8 @@
 	iwl_mvm_mac_ctxt_cmd_common(mvm, vif, &cmd, action);
 
 	/* Fill the data specific for station mode */
-	iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.p2p_sta.sta);
+	iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.p2p_sta.sta,
+				      action == FW_CTXT_ACTION_ADD);
 
 	cmd.p2p_sta.ctwin = cpu_to_le32(noa->oppps_ctwindow &
 					IEEE80211_P2P_OPPPS_CTWINDOW_MASK);
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index dd158ec..a5eb8c8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -701,6 +701,20 @@
 	*total_flags = 0;
 }
 
+static int iwl_mvm_configure_mcast_filter(struct iwl_mvm *mvm,
+					  struct ieee80211_vif *vif)
+{
+	struct iwl_mcast_filter_cmd mcast_filter_cmd = {
+		.pass_all = 1,
+	};
+
+	memcpy(mcast_filter_cmd.bssid, vif->bss_conf.bssid, ETH_ALEN);
+
+	return iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_SYNC,
+				    sizeof(mcast_filter_cmd),
+				    &mcast_filter_cmd);
+}
+
 static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 					     struct ieee80211_vif *vif,
 					     struct ieee80211_bss_conf *bss_conf,
@@ -722,6 +736,7 @@
 				return;
 			}
 			iwl_mvm_bt_coex_vif_assoc(mvm, vif);
+			iwl_mvm_configure_mcast_filter(mvm, vif);
 		} else if (mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) {
 			/* remove AP station now that the MAC is unassoc */
 			ret = iwl_mvm_rm_sta_id(mvm, vif, mvmvif->ap_sta_id);
@@ -931,7 +946,7 @@
 
 	switch (cmd) {
 	case STA_NOTIFY_SLEEP:
-		if (atomic_read(&mvmsta->pending_frames) > 0)
+		if (atomic_read(&mvm->pending_frames[mvmsta->sta_id]) > 0)
 			ieee80211_sta_block_awake(hw, sta, true);
 		/*
 		 * The fw updates the STA to be asleep. Tx packets on the Tx
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 8269bc5..9f46b23 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -292,6 +292,7 @@
 	struct ieee80211_sta __rcu *fw_id_to_mac_id[IWL_MVM_STATION_COUNT];
 	struct work_struct sta_drained_wk;
 	unsigned long sta_drained[BITS_TO_LONGS(IWL_MVM_STATION_COUNT)];
+	atomic_t pending_frames[IWL_MVM_STATION_COUNT];
 
 	/* configured by mac80211 */
 	u32 rts_threshold;
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index fe031d3..b29c31a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -292,6 +292,7 @@
 	CMD(BT_COEX_PROT_ENV),
 	CMD(BT_PROFILE_NOTIFICATION),
 	CMD(BT_CONFIG),
+	CMD(MCAST_FILTER_CMD),
 };
 #undef CMD
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 2157b0f..2476e43 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -298,6 +298,12 @@
 	else
 		cmd->type = cpu_to_le32(SCAN_TYPE_FORCED);
 
+	/*
+	 * TODO: This is a WA due to a bug in the FW AUX framework that does not
+	 * properly handle time events that fail to be scheduled
+	 */
+	cmd->type = cpu_to_le32(SCAN_TYPE_FORCED);
+
 	cmd->repeats = cpu_to_le32(1);
 
 	/*
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index 0fd96e4..5c664ed 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -219,7 +219,7 @@
 	mvm_sta->max_agg_bufsize = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
 
 	/* HW restart, don't assume the memory has been zeroed */
-	atomic_set(&mvm_sta->pending_frames, 0);
+	atomic_set(&mvm->pending_frames[sta_id], 0);
 	mvm_sta->tid_disable_agg = 0;
 	mvm_sta->tfd_queue_msk = 0;
 	for (i = 0; i < IEEE80211_NUM_ACS; i++)
@@ -407,14 +407,21 @@
 	}
 
 	/*
+	 * Make sure that the tx response code sees the station as -EBUSY and
+	 * calls the drain worker.
+	 */
+	spin_lock_bh(&mvm_sta->lock);
+	/*
 	 * There are frames pending on the AC queues for this station.
 	 * We need to wait until all the frames are drained...
 	 */
-	if (atomic_read(&mvm_sta->pending_frames)) {
-		ret = iwl_mvm_drain_sta(mvm, mvm_sta, true);
+	if (atomic_read(&mvm->pending_frames[mvm_sta->sta_id])) {
 		rcu_assign_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id],
 				   ERR_PTR(-EBUSY));
+		spin_unlock_bh(&mvm_sta->lock);
+		ret = iwl_mvm_drain_sta(mvm, mvm_sta, true);
 	} else {
+		spin_unlock_bh(&mvm_sta->lock);
 		ret = iwl_mvm_rm_sta_common(mvm, mvm_sta->sta_id);
 		rcu_assign_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id], NULL);
 	}
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h
index 12abd2d..a4ddce7 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.h
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.h
@@ -274,7 +274,6 @@
  * @bt_reduced_txpower: is reduced tx power enabled for this station
  * @lock: lock to protect the whole struct. Since %tid_data is access from Tx
  * and from Tx response flow, it needs a spinlock.
- * @pending_frames: number of frames for this STA on the shared Tx queues.
  * @tid_data: per tid data. Look at %iwl_mvm_tid_data.
  *
  * When mac80211 creates a station it reserves some space (hw->sta_data_size)
@@ -290,7 +289,6 @@
 	u8 max_agg_bufsize;
 	bool bt_reduced_txpower;
 	spinlock_t lock;
-	atomic_t pending_frames;
 	struct iwl_mvm_tid_data tid_data[IWL_MAX_TID_COUNT];
 	struct iwl_lq_sta lq_sta;
 	struct ieee80211_vif *vif;
diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index 4790743..f212f16 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -416,9 +416,8 @@
 
 	spin_unlock(&mvmsta->lock);
 
-	if (mvmsta->vif->type == NL80211_IFTYPE_AP &&
-	    txq_id < IWL_MVM_FIRST_AGG_QUEUE)
-		atomic_inc(&mvmsta->pending_frames);
+	if (txq_id < IWL_MVM_FIRST_AGG_QUEUE)
+		atomic_inc(&mvm->pending_frames[mvmsta->sta_id]);
 
 	return 0;
 
@@ -680,16 +679,41 @@
 	/*
 	 * If the txq is not an AMPDU queue, there is no chance we freed
 	 * several skbs. Check that out...
-	 * If there are no pending frames for this STA, notify mac80211 that
-	 * this station can go to sleep in its STA table.
 	 */
-	if (txq_id < IWL_MVM_FIRST_AGG_QUEUE && mvmsta &&
-	    !WARN_ON(skb_freed > 1) &&
-	    mvmsta->vif->type == NL80211_IFTYPE_AP &&
-	    atomic_sub_and_test(skb_freed, &mvmsta->pending_frames)) {
-		ieee80211_sta_block_awake(mvm->hw, sta, false);
-		set_bit(sta_id, mvm->sta_drained);
-		schedule_work(&mvm->sta_drained_wk);
+	if (txq_id < IWL_MVM_FIRST_AGG_QUEUE && !WARN_ON(skb_freed > 1) &&
+	    atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) {
+		if (mvmsta) {
+			/*
+			 * If there are no pending frames for this STA, notify
+			 * mac80211 that this station can go to sleep in its
+			 * STA table.
+			 */
+			if (mvmsta->vif->type == NL80211_IFTYPE_AP)
+				ieee80211_sta_block_awake(mvm->hw, sta, false);
+			/*
+			 * We might very well have taken mvmsta pointer while
+			 * the station was being removed. The remove flow might
+			 * have seen a pending_frame (because we didn't take
+			 * the lock) even if now the queues are drained. So make
+			 * really sure now that this the station is not being
+			 * removed. If it is, run the drain worker to remove it.
+			 */
+			spin_lock_bh(&mvmsta->lock);
+			sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]);
+			if (IS_ERR_OR_NULL(sta)) {
+				/*
+				 * Station disappeared in the meantime:
+				 * so we are draining.
+				 */
+				set_bit(sta_id, mvm->sta_drained);
+				schedule_work(&mvm->sta_drained_wk);
+			}
+			spin_unlock_bh(&mvmsta->lock);
+		} else if (!mvmsta) {
+			/* Tx response without STA, so we are draining */
+			set_bit(sta_id, mvm->sta_drained);
+			schedule_work(&mvm->sta_drained_wk);
+		}
 	}
 
 	rcu_read_unlock();
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index b878a32..cb34c78 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1723,11 +1723,11 @@
 	class_destroy(hwsim_class);
 }
 
-
-static struct device_driver mac80211_hwsim_driver = {
-	.name = "mac80211_hwsim",
-	.bus = &platform_bus_type,
-	.owner = THIS_MODULE,
+static struct platform_driver mac80211_hwsim_driver = {
+	.driver = {
+		.name = "mac80211_hwsim",
+		.owner = THIS_MODULE,
+	},
 };
 
 static const struct net_device_ops hwsim_netdev_ops = {
@@ -2219,7 +2219,7 @@
 	spin_lock_init(&hwsim_radio_lock);
 	INIT_LIST_HEAD(&hwsim_radios);
 
-	err = driver_register(&mac80211_hwsim_driver);
+	err = platform_driver_register(&mac80211_hwsim_driver);
 	if (err)
 		return err;
 
@@ -2254,7 +2254,7 @@
 			err = -ENOMEM;
 			goto failed_drvdata;
 		}
-		data->dev->driver = &mac80211_hwsim_driver;
+		data->dev->driver = &mac80211_hwsim_driver.driver;
 		err = device_bind_driver(data->dev);
 		if (err != 0) {
 			printk(KERN_DEBUG
@@ -2564,7 +2564,7 @@
 failed:
 	mac80211_hwsim_free();
 failed_unregister_driver:
-	driver_unregister(&mac80211_hwsim_driver);
+	platform_driver_unregister(&mac80211_hwsim_driver);
 	return err;
 }
 module_init(init_mac80211_hwsim);
@@ -2577,6 +2577,6 @@
 
 	mac80211_hwsim_free();
 	unregister_netdev(hwsim_mon);
-	driver_unregister(&mac80211_hwsim_driver);
+	platform_driver_unregister(&mac80211_hwsim_driver);
 }
 module_exit(exit_mac80211_hwsim);
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h
index d3a02e7..21ca33a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h
@@ -550,7 +550,7 @@
 	 rxmcs == DESC92C_RATE11M)
 
 struct phy_rx_agc_info_t {
-	#if __LITTLE_ENDIAN
+	#ifdef __LITTLE_ENDIAN
 		u8	gain:7, trsw:1;
 	#else
 		u8	trsw:1, gain:7;
@@ -574,7 +574,7 @@
 	u8	stream_target_csi[2];
 	u8	sig_evm;
 	u8	rsvd_3;
-#if __LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 	u8	antsel_rx_keep_2:1;	/*ex_intf_flg:1;*/
 	u8	sgi_en:1;
 	u8	rxsc:2;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 23d640a..938b1e6 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -349,6 +349,7 @@
 	{RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/
 	{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
 	{RTL_USB_DEVICE(0x0846, 0x9021, rtl92cu_hal_cfg)}, /*Netgear-Sercomm*/
+	{RTL_USB_DEVICE(0x0846, 0xf001, rtl92cu_hal_cfg)}, /*On Netwrks N300MA*/
 	{RTL_USB_DEVICE(0x0b05, 0x17ab, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
 	{RTL_USB_DEVICE(0x0bda, 0x8186, rtl92cu_hal_cfg)}, /*Realtek 92CE-VAU*/
 	{RTL_USB_DEVICE(0x0df6, 0x0061, rtl92cu_hal_cfg)}, /*Sitecom-Edimax*/
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index ac6e8e7..a042d06 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -494,15 +494,4 @@
 	.probe =        superio_probe,
 };
 
-static int __init superio_modinit(void)
-{
-	return pci_register_driver(&superio_driver);
-}
-
-static void __exit superio_exit(void)
-{
-	pci_unregister_driver(&superio_driver);
-}
-
-module_init(superio_modinit);
-module_exit(superio_exit);
+module_pci_driver(superio_driver);
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 96fed19..716aa93 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -950,6 +950,20 @@
 	return AE_OK ;
 }
 
+void acpiphp_check_host_bridge(acpi_handle handle)
+{
+	struct acpiphp_bridge *bridge;
+
+	bridge = acpiphp_handle_to_bridge(handle);
+	if (bridge) {
+		acpiphp_check_bridge(bridge);
+		put_bridge(bridge);
+	}
+
+	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
+		ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL, NULL);
+}
+
 static void _handle_hotplug_event_bridge(struct work_struct *work)
 {
 	struct acpiphp_bridge *bridge;
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 0d0b5d7..7b8979c 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -152,6 +152,7 @@
 
 config BATTERY_BQ27x00
 	tristate "BQ27x00 battery driver"
+	depends on I2C || I2C=n
 	help
 	  Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.
 
@@ -284,6 +285,7 @@
 	tristate "TI LP8788 charger driver"
 	depends on MFD_LP8788
 	depends on LP8788_ADC
+	depends on IIO
 	help
 	  Say Y to enable support for the LP8788 linear charger.
 
diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
index a441751..fef56e2 100644
--- a/drivers/power/pm2301_charger.c
+++ b/drivers/power/pm2301_charger.c
@@ -1269,5 +1269,5 @@
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay");
-MODULE_ALIAS("platform:pm2xxx-charger");
+MODULE_ALIAS("i2c:pm2xxx-charger");
 MODULE_DESCRIPTION("PM2xxx charger management driver");
diff --git a/drivers/power/wm831x_backup.c b/drivers/power/wm831x_backup.c
index 58cbb00..56fb509 100644
--- a/drivers/power/wm831x_backup.c
+++ b/drivers/power/wm831x_backup.c
@@ -207,7 +207,6 @@
 	struct wm831x_backup *devdata = platform_get_drvdata(pdev);
 
 	power_supply_unregister(&devdata->backup);
-	kfree(devdata->backup.name);
 
 	return 0;
 }
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 6194d35..5ab0564 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -47,4 +47,24 @@
 
 	  If you are unsure about this, say N here.
 
+choice
+	prompt "Enumeration method"
+	depends on RAPIDIO
+	default RAPIDIO_ENUM_BASIC
+	help
+	  There are different enumeration and discovery mechanisms offered
+	  for RapidIO subsystem. You may select single built-in method or
+	  or any number of methods to be built as modules.
+	  Selecting a built-in method disables use of loadable methods.
+
+	  If unsure, select Basic built-in.
+
+config RAPIDIO_ENUM_BASIC
+	tristate "Basic"
+	help
+	  This option includes basic RapidIO fabric enumeration and discovery
+	  mechanism similar to one described in RapidIO specification Annex 1.
+
+endchoice
+
 source "drivers/rapidio/switches/Kconfig"
diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile
index ec3fb81..3036702 100644
--- a/drivers/rapidio/Makefile
+++ b/drivers/rapidio/Makefile
@@ -1,7 +1,8 @@
 #
 # Makefile for RapidIO interconnect services
 #
-obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o
+obj-y += rio.o rio-access.o rio-driver.o rio-sysfs.o
+obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o
 
 obj-$(CONFIG_RAPIDIO)		+= switches/
 obj-$(CONFIG_RAPIDIO)		+= devices/
diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
index 6faba40..a8b2c23 100644
--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -471,6 +471,10 @@
 	u32 intval;
 	u32 ch_inte;
 
+	/* For MSI mode disable all device-level interrupts */
+	if (priv->flags & TSI721_USING_MSI)
+		iowrite32(0, priv->regs + TSI721_DEV_INTE);
+
 	dev_int = ioread32(priv->regs + TSI721_DEV_INT);
 	if (!dev_int)
 		return IRQ_NONE;
@@ -560,6 +564,14 @@
 		}
 	}
 #endif
+
+	/* For MSI mode re-enable device-level interrupts */
+	if (priv->flags & TSI721_USING_MSI) {
+		dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
+			TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
+		iowrite32(dev_int, priv->regs + TSI721_DEV_INTE);
+	}
+
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c
index 0f4a53b..a0c8755 100644
--- a/drivers/rapidio/rio-driver.c
+++ b/drivers/rapidio/rio-driver.c
@@ -164,6 +164,13 @@
 	driver_unregister(&rdrv->driver);
 }
 
+void rio_attach_device(struct rio_dev *rdev)
+{
+	rdev->dev.bus = &rio_bus_type;
+	rdev->dev.parent = &rio_bus;
+}
+EXPORT_SYMBOL_GPL(rio_attach_device);
+
 /**
  *  rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure
  *  @dev: the standard device structure to match against
@@ -200,6 +207,7 @@
 	.name = "rapidio",
 	.match = rio_match_bus,
 	.dev_attrs = rio_dev_attrs,
+	.bus_attrs = rio_bus_attrs,
 	.probe = rio_device_probe,
 	.remove = rio_device_remove,
 };
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index a965acd..4c15dbf 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -37,12 +37,8 @@
 
 #include "rio.h"
 
-LIST_HEAD(rio_devices);
-
 static void rio_init_em(struct rio_dev *rdev);
 
-DEFINE_SPINLOCK(rio_global_list_lock);
-
 static int next_destid = 0;
 static int next_comptag = 1;
 
@@ -327,127 +323,6 @@
 }
 
 /**
- * rio_switch_init - Sets switch operations for a particular vendor switch
- * @rdev: RIO device
- * @do_enum: Enumeration/Discovery mode flag
- *
- * Searches the RIO switch ops table for known switch types. If the vid
- * and did match a switch table entry, then call switch initialization
- * routine to setup switch-specific routines.
- */
-static void rio_switch_init(struct rio_dev *rdev, int do_enum)
-{
-	struct rio_switch_ops *cur = __start_rio_switch_ops;
-	struct rio_switch_ops *end = __end_rio_switch_ops;
-
-	while (cur < end) {
-		if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
-			pr_debug("RIO: calling init routine for %s\n",
-				 rio_name(rdev));
-			cur->init_hook(rdev, do_enum);
-			break;
-		}
-		cur++;
-	}
-
-	if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
-		pr_debug("RIO: adding STD routing ops for %s\n",
-			rio_name(rdev));
-		rdev->rswitch->add_entry = rio_std_route_add_entry;
-		rdev->rswitch->get_entry = rio_std_route_get_entry;
-		rdev->rswitch->clr_table = rio_std_route_clr_table;
-	}
-
-	if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
-		printk(KERN_ERR "RIO: missing routing ops for %s\n",
-		       rio_name(rdev));
-}
-
-/**
- * rio_add_device- Adds a RIO device to the device model
- * @rdev: RIO device
- *
- * Adds the RIO device to the global device list and adds the RIO
- * device to the RIO device list.  Creates the generic sysfs nodes
- * for an RIO device.
- */
-static int rio_add_device(struct rio_dev *rdev)
-{
-	int err;
-
-	err = device_add(&rdev->dev);
-	if (err)
-		return err;
-
-	spin_lock(&rio_global_list_lock);
-	list_add_tail(&rdev->global_list, &rio_devices);
-	spin_unlock(&rio_global_list_lock);
-
-	rio_create_sysfs_dev_files(rdev);
-
-	return 0;
-}
-
-/**
- * rio_enable_rx_tx_port - enable input receiver and output transmitter of
- * given port
- * @port: Master port associated with the RIO network
- * @local: local=1 select local port otherwise a far device is reached
- * @destid: Destination ID of the device to check host bit
- * @hopcount: Number of hops to reach the target
- * @port_num: Port (-number on switch) to enable on a far end device
- *
- * Returns 0 or 1 from on General Control Command and Status Register
- * (EXT_PTR+0x3C)
- */
-inline int rio_enable_rx_tx_port(struct rio_mport *port,
-				 int local, u16 destid,
-				 u8 hopcount, u8 port_num) {
-#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
-	u32 regval;
-	u32 ext_ftr_ptr;
-
-	/*
-	* enable rx input tx output port
-	*/
-	pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
-		 "%d, port_num = %d)\n", local, destid, hopcount, port_num);
-
-	ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
-
-	if (local) {
-		rio_local_read_config_32(port, ext_ftr_ptr +
-				RIO_PORT_N_CTL_CSR(0),
-				&regval);
-	} else {
-		if (rio_mport_read_config_32(port, destid, hopcount,
-		ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), &regval) < 0)
-			return -EIO;
-	}
-
-	if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
-		/* serial */
-		regval = regval | RIO_PORT_N_CTL_EN_RX_SER
-				| RIO_PORT_N_CTL_EN_TX_SER;
-	} else {
-		/* parallel */
-		regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
-				| RIO_PORT_N_CTL_EN_TX_PAR;
-	}
-
-	if (local) {
-		rio_local_write_config_32(port, ext_ftr_ptr +
-					  RIO_PORT_N_CTL_CSR(0), regval);
-	} else {
-		if (rio_mport_write_config_32(port, destid, hopcount,
-		    ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
-			return -EIO;
-	}
-#endif
-	return 0;
-}
-
-/**
  * rio_setup_device- Allocates and sets up a RIO device
  * @net: RIO network
  * @port: Master port to send transactions
@@ -587,8 +462,7 @@
 			     rdev->destid);
 	}
 
-	rdev->dev.bus = &rio_bus_type;
-	rdev->dev.parent = &rio_bus;
+	rio_attach_device(rdev);
 
 	device_initialize(&rdev->dev);
 	rdev->dev.release = rio_release_dev;
@@ -1260,19 +1134,30 @@
 /**
  * rio_enum_mport- Start enumeration through a master port
  * @mport: Master port to send transactions
+ * @flags: Enumeration control flags
  *
  * Starts the enumeration process. If somebody has enumerated our
  * master port device, then give up. If not and we have an active
  * link, then start recursive peer enumeration. Returns %0 if
  * enumeration succeeds or %-EBUSY if enumeration fails.
  */
-int rio_enum_mport(struct rio_mport *mport)
+int rio_enum_mport(struct rio_mport *mport, u32 flags)
 {
 	struct rio_net *net = NULL;
 	int rc = 0;
 
 	printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id,
 	       mport->name);
+
+	/*
+	 * To avoid multiple start requests (repeat enumeration is not supported
+	 * by this method) check if enumeration/discovery was performed for this
+	 * mport: if mport was added into the list of mports for a net exit
+	 * with error.
+	 */
+	if (mport->nnode.next || mport->nnode.prev)
+		return -EBUSY;
+
 	/* If somebody else enumerated our master port device, bail. */
 	if (rio_enum_host(mport) < 0) {
 		printk(KERN_INFO
@@ -1362,14 +1247,16 @@
 /**
  * rio_disc_mport- Start discovery through a master port
  * @mport: Master port to send transactions
+ * @flags: discovery control flags
  *
  * Starts the discovery process. If we have an active link,
- * then wait for the signal that enumeration is complete.
+ * then wait for the signal that enumeration is complete (if wait
+ * is allowed).
  * When enumeration completion is signaled, start recursive
  * peer discovery. Returns %0 if discovery succeeds or %-EBUSY
  * on failure.
  */
-int rio_disc_mport(struct rio_mport *mport)
+int rio_disc_mport(struct rio_mport *mport, u32 flags)
 {
 	struct rio_net *net = NULL;
 	unsigned long to_end;
@@ -1379,6 +1266,11 @@
 
 	/* If master port has an active link, allocate net and discover peers */
 	if (rio_mport_is_active(mport)) {
+		if (rio_enum_complete(mport))
+			goto enum_done;
+		else if (flags & RIO_SCAN_ENUM_NO_WAIT)
+			return -EAGAIN;
+
 		pr_debug("RIO: wait for enumeration to complete...\n");
 
 		to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ;
@@ -1421,3 +1313,41 @@
 bail:
 	return -EBUSY;
 }
+
+static struct rio_scan rio_scan_ops = {
+	.enumerate = rio_enum_mport,
+	.discover = rio_disc_mport,
+};
+
+static bool scan;
+module_param(scan, bool, 0);
+MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery "
+			"(default = 0)");
+
+/**
+ * rio_basic_attach:
+ *
+ * When this enumeration/discovery method is loaded as a module this function
+ * registers its specific enumeration and discover routines for all available
+ * RapidIO mport devices. The "scan" command line parameter controls ability of
+ * the module to start RapidIO enumeration/discovery automatically.
+ *
+ * Returns 0 for success or -EIO if unable to register itself.
+ *
+ * This enumeration/discovery method cannot be unloaded and therefore does not
+ * provide a matching cleanup_module routine.
+ */
+
+static int __init rio_basic_attach(void)
+{
+	if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops))
+		return -EIO;
+	if (scan)
+		rio_init_mports();
+	return 0;
+}
+
+late_initcall(rio_basic_attach);
+
+MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index 4dbe360..66d4acd 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -285,3 +285,48 @@
 			rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE);
 	}
 }
+
+static ssize_t bus_scan_store(struct bus_type *bus, const char *buf,
+				size_t count)
+{
+	long val;
+	struct rio_mport *port = NULL;
+	int rc;
+
+	if (kstrtol(buf, 0, &val) < 0)
+		return -EINVAL;
+
+	if (val == RIO_MPORT_ANY) {
+		rc = rio_init_mports();
+		goto exit;
+	}
+
+	if (val < 0 || val >= RIO_MAX_MPORTS)
+		return -EINVAL;
+
+	port = rio_find_mport((int)val);
+
+	if (!port) {
+		pr_debug("RIO: %s: mport_%d not available\n",
+			 __func__, (int)val);
+		return -EINVAL;
+	}
+
+	if (!port->nscan)
+		return -EINVAL;
+
+	if (port->host_deviceid >= 0)
+		rc = port->nscan->enumerate(port, 0);
+	else
+		rc = port->nscan->discover(port, RIO_SCAN_ENUM_NO_WAIT);
+exit:
+	if (!rc)
+		rc = count;
+
+	return rc;
+}
+
+struct bus_attribute rio_bus_attrs[] = {
+	__ATTR(scan, (S_IWUSR|S_IWGRP), NULL, bus_scan_store),
+	__ATTR_NULL
+};
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index d553b5d..cb1c089 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -31,7 +31,11 @@
 
 #include "rio.h"
 
+static LIST_HEAD(rio_devices);
+static DEFINE_SPINLOCK(rio_global_list_lock);
+
 static LIST_HEAD(rio_mports);
+static DEFINE_MUTEX(rio_mport_list_lock);
 static unsigned char next_portid;
 static DEFINE_SPINLOCK(rio_mmap_lock);
 
@@ -53,6 +57,32 @@
 }
 
 /**
+ * rio_add_device- Adds a RIO device to the device model
+ * @rdev: RIO device
+ *
+ * Adds the RIO device to the global device list and adds the RIO
+ * device to the RIO device list.  Creates the generic sysfs nodes
+ * for an RIO device.
+ */
+int rio_add_device(struct rio_dev *rdev)
+{
+	int err;
+
+	err = device_add(&rdev->dev);
+	if (err)
+		return err;
+
+	spin_lock(&rio_global_list_lock);
+	list_add_tail(&rdev->global_list, &rio_devices);
+	spin_unlock(&rio_global_list_lock);
+
+	rio_create_sysfs_dev_files(rdev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_add_device);
+
+/**
  * rio_request_inb_mbox - request inbound mailbox service
  * @mport: RIO master port from which to allocate the mailbox resource
  * @dev_id: Device specific pointer to pass on event
@@ -489,6 +519,7 @@
 
 	return ext_ftr_ptr;
 }
+EXPORT_SYMBOL_GPL(rio_mport_get_physefb);
 
 /**
  * rio_get_comptag - Begin or continue searching for a RIO device by component tag
@@ -521,6 +552,7 @@
 	spin_unlock(&rio_global_list_lock);
 	return rdev;
 }
+EXPORT_SYMBOL_GPL(rio_get_comptag);
 
 /**
  * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port.
@@ -545,6 +577,107 @@
 				  regval);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(rio_set_port_lockout);
+
+/**
+ * rio_switch_init - Sets switch operations for a particular vendor switch
+ * @rdev: RIO device
+ * @do_enum: Enumeration/Discovery mode flag
+ *
+ * Searches the RIO switch ops table for known switch types. If the vid
+ * and did match a switch table entry, then call switch initialization
+ * routine to setup switch-specific routines.
+ */
+void rio_switch_init(struct rio_dev *rdev, int do_enum)
+{
+	struct rio_switch_ops *cur = __start_rio_switch_ops;
+	struct rio_switch_ops *end = __end_rio_switch_ops;
+
+	while (cur < end) {
+		if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
+			pr_debug("RIO: calling init routine for %s\n",
+				 rio_name(rdev));
+			cur->init_hook(rdev, do_enum);
+			break;
+		}
+		cur++;
+	}
+
+	if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
+		pr_debug("RIO: adding STD routing ops for %s\n",
+			rio_name(rdev));
+		rdev->rswitch->add_entry = rio_std_route_add_entry;
+		rdev->rswitch->get_entry = rio_std_route_get_entry;
+		rdev->rswitch->clr_table = rio_std_route_clr_table;
+	}
+
+	if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
+		printk(KERN_ERR "RIO: missing routing ops for %s\n",
+		       rio_name(rdev));
+}
+EXPORT_SYMBOL_GPL(rio_switch_init);
+
+/**
+ * rio_enable_rx_tx_port - enable input receiver and output transmitter of
+ * given port
+ * @port: Master port associated with the RIO network
+ * @local: local=1 select local port otherwise a far device is reached
+ * @destid: Destination ID of the device to check host bit
+ * @hopcount: Number of hops to reach the target
+ * @port_num: Port (-number on switch) to enable on a far end device
+ *
+ * Returns 0 or 1 from on General Control Command and Status Register
+ * (EXT_PTR+0x3C)
+ */
+int rio_enable_rx_tx_port(struct rio_mport *port,
+			  int local, u16 destid,
+			  u8 hopcount, u8 port_num)
+{
+#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
+	u32 regval;
+	u32 ext_ftr_ptr;
+
+	/*
+	* enable rx input tx output port
+	*/
+	pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
+		 "%d, port_num = %d)\n", local, destid, hopcount, port_num);
+
+	ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
+
+	if (local) {
+		rio_local_read_config_32(port, ext_ftr_ptr +
+				RIO_PORT_N_CTL_CSR(0),
+				&regval);
+	} else {
+		if (rio_mport_read_config_32(port, destid, hopcount,
+		ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), &regval) < 0)
+			return -EIO;
+	}
+
+	if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
+		/* serial */
+		regval = regval | RIO_PORT_N_CTL_EN_RX_SER
+				| RIO_PORT_N_CTL_EN_TX_SER;
+	} else {
+		/* parallel */
+		regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
+				| RIO_PORT_N_CTL_EN_TX_PAR;
+	}
+
+	if (local) {
+		rio_local_write_config_32(port, ext_ftr_ptr +
+					  RIO_PORT_N_CTL_CSR(0), regval);
+	} else {
+		if (rio_mport_write_config_32(port, destid, hopcount,
+		    ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
+			return -EIO;
+	}
+#endif
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port);
+
 
 /**
  * rio_chk_dev_route - Validate route to the specified device.
@@ -610,6 +743,7 @@
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access);
 
 /**
  * rio_chk_dev_access - Validate access to the specified device.
@@ -941,6 +1075,7 @@
 		return RIO_GET_BLOCK_ID(reg_val);
 	}
 }
+EXPORT_SYMBOL_GPL(rio_mport_get_efb);
 
 /**
  * rio_mport_get_feature - query for devices' extended features
@@ -997,6 +1132,7 @@
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(rio_mport_get_feature);
 
 /**
  * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did
@@ -1246,6 +1382,95 @@
 
 #endif /* CONFIG_RAPIDIO_DMA_ENGINE */
 
+/**
+ * rio_find_mport - find RIO mport by its ID
+ * @mport_id: number (ID) of mport device
+ *
+ * Given a RIO mport number, the desired mport is located
+ * in the global list of mports. If the mport is found, a pointer to its
+ * data structure is returned.  If no mport is found, %NULL is returned.
+ */
+struct rio_mport *rio_find_mport(int mport_id)
+{
+	struct rio_mport *port;
+
+	mutex_lock(&rio_mport_list_lock);
+	list_for_each_entry(port, &rio_mports, node) {
+		if (port->id == mport_id)
+			goto found;
+	}
+	port = NULL;
+found:
+	mutex_unlock(&rio_mport_list_lock);
+
+	return port;
+}
+
+/**
+ * rio_register_scan - enumeration/discovery method registration interface
+ * @mport_id: mport device ID for which fabric scan routine has to be set
+ *            (RIO_MPORT_ANY = set for all available mports)
+ * @scan_ops: enumeration/discovery control structure
+ *
+ * Assigns enumeration or discovery method to the specified mport device (or all
+ * available mports if RIO_MPORT_ANY is specified).
+ * Returns error if the mport already has an enumerator attached to it.
+ * In case of RIO_MPORT_ANY ignores ports with valid scan routines and returns
+ * an error if was unable to find at least one available mport.
+ */
+int rio_register_scan(int mport_id, struct rio_scan *scan_ops)
+{
+	struct rio_mport *port;
+	int rc = -EBUSY;
+
+	mutex_lock(&rio_mport_list_lock);
+	list_for_each_entry(port, &rio_mports, node) {
+		if (port->id == mport_id || mport_id == RIO_MPORT_ANY) {
+			if (port->nscan && mport_id == RIO_MPORT_ANY)
+				continue;
+			else if (port->nscan)
+				break;
+
+			port->nscan = scan_ops;
+			rc = 0;
+
+			if (mport_id != RIO_MPORT_ANY)
+				break;
+		}
+	}
+	mutex_unlock(&rio_mport_list_lock);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(rio_register_scan);
+
+/**
+ * rio_unregister_scan - removes enumeration/discovery method from mport
+ * @mport_id: mport device ID for which fabric scan routine has to be
+ *            unregistered (RIO_MPORT_ANY = set for all available mports)
+ *
+ * Removes enumeration or discovery method assigned to the specified mport
+ * device (or all available mports if RIO_MPORT_ANY is specified).
+ */
+int rio_unregister_scan(int mport_id)
+{
+	struct rio_mport *port;
+
+	mutex_lock(&rio_mport_list_lock);
+	list_for_each_entry(port, &rio_mports, node) {
+		if (port->id == mport_id || mport_id == RIO_MPORT_ANY) {
+			if (port->nscan)
+				port->nscan = NULL;
+			if (mport_id != RIO_MPORT_ANY)
+				break;
+		}
+	}
+	mutex_unlock(&rio_mport_list_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_unregister_scan);
+
 static void rio_fixup_device(struct rio_dev *dev)
 {
 }
@@ -1274,7 +1499,7 @@
 	work = container_of(_work, struct rio_disc_work, work);
 	pr_debug("RIO: discovery work for mport %d %s\n",
 		 work->mport->id, work->mport->name);
-	rio_disc_mport(work->mport);
+	work->mport->nscan->discover(work->mport, 0);
 }
 
 int rio_init_mports(void)
@@ -1290,12 +1515,15 @@
 	 * First, run enumerations and check if we need to perform discovery
 	 * on any of the registered mports.
 	 */
+	mutex_lock(&rio_mport_list_lock);
 	list_for_each_entry(port, &rio_mports, node) {
-		if (port->host_deviceid >= 0)
-			rio_enum_mport(port);
-		else
+		if (port->host_deviceid >= 0) {
+			if (port->nscan)
+				port->nscan->enumerate(port, 0);
+		} else
 			n++;
 	}
+	mutex_unlock(&rio_mport_list_lock);
 
 	if (!n)
 		goto no_disc;
@@ -1322,14 +1550,16 @@
 	}
 
 	n = 0;
+	mutex_lock(&rio_mport_list_lock);
 	list_for_each_entry(port, &rio_mports, node) {
-		if (port->host_deviceid < 0) {
+		if (port->host_deviceid < 0 && port->nscan) {
 			work[n].mport = port;
 			INIT_WORK(&work[n].work, disc_work_handler);
 			queue_work(rio_wq, &work[n].work);
 			n++;
 		}
 	}
+	mutex_unlock(&rio_mport_list_lock);
 
 	flush_workqueue(rio_wq);
 	pr_debug("RIO: destroy discovery workqueue\n");
@@ -1342,8 +1572,6 @@
 	return 0;
 }
 
-device_initcall_sync(rio_init_mports);
-
 static int hdids[RIO_MAX_MPORTS + 1];
 
 static int rio_get_hdid(int index)
@@ -1371,7 +1599,10 @@
 
 	port->id = next_portid++;
 	port->host_deviceid = rio_get_hdid(port->id);
+	port->nscan = NULL;
+	mutex_lock(&rio_mport_list_lock);
 	list_add_tail(&port->node, &rio_mports);
+	mutex_unlock(&rio_mport_list_lock);
 	return 0;
 }
 
@@ -1386,3 +1617,4 @@
 EXPORT_SYMBOL_GPL(rio_release_inb_mbox);
 EXPORT_SYMBOL_GPL(rio_request_outb_mbox);
 EXPORT_SYMBOL_GPL(rio_release_outb_mbox);
+EXPORT_SYMBOL_GPL(rio_init_mports);
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index b1af414..c14f864 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -15,6 +15,7 @@
 #include <linux/rio.h>
 
 #define RIO_MAX_CHK_RETRY	3
+#define RIO_MPORT_ANY		(-1)
 
 /* Functions internal to the RIO core code */
 
@@ -27,8 +28,6 @@
 extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid,
 				    u8 hopcount);
 extern int rio_create_sysfs_dev_files(struct rio_dev *rdev);
-extern int rio_enum_mport(struct rio_mport *mport);
-extern int rio_disc_mport(struct rio_mport *mport);
 extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid,
 				   u8 hopcount, u16 table, u16 route_destid,
 				   u8 route_port);
@@ -39,10 +38,18 @@
 				   u8 hopcount, u16 table);
 extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock);
 extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from);
+extern int rio_add_device(struct rio_dev *rdev);
+extern void rio_switch_init(struct rio_dev *rdev, int do_enum);
+extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid,
+				 u8 hopcount, u8 port_num);
+extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops);
+extern int rio_unregister_scan(int mport_id);
+extern void rio_attach_device(struct rio_dev *rdev);
+extern struct rio_mport *rio_find_mport(int mport_id);
 
 /* Structures internal to the RIO core code */
 extern struct device_attribute rio_dev_attrs[];
-extern spinlock_t rio_global_list_lock;
+extern struct bus_attribute rio_bus_attrs[];
 
 extern struct rio_switch_ops __start_rio_switch_ops[];
 extern struct rio_switch_ops __end_rio_switch_ops[];
diff --git a/drivers/rtc/rtc-max8998.c b/drivers/rtc/rtc-max8998.c
index 48b6612..d5af7ba 100644
--- a/drivers/rtc/rtc-max8998.c
+++ b/drivers/rtc/rtc-max8998.c
@@ -285,7 +285,7 @@
 			info->irq, ret);
 
 	dev_info(&pdev->dev, "RTC CHIP NAME: %s\n", pdev->id_entry->name);
-	if (pdata->rtc_delay) {
+	if (pdata && pdata->rtc_delay) {
 		info->lp3974_bug_workaround = true;
 		dev_warn(&pdev->dev, "LP3974 with RTC REGERR option."
 				" RTC updates will be extremely slow.\n");
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 8900ea7..0f0609b 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -306,7 +306,7 @@
 	struct pl031_local *ldata = dev_get_drvdata(&adev->dev);
 
 	amba_set_drvdata(adev, NULL);
-	free_irq(adev->irq[0], ldata->rtc);
+	free_irq(adev->irq[0], ldata);
 	rtc_device_unregister(ldata->rtc);
 	iounmap(ldata->base);
 	kfree(ldata);
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
index 690c333..464dd29 100644
--- a/drivers/s390/block/xpram.c
+++ b/drivers/s390/block/xpram.c
@@ -343,6 +343,7 @@
 			put_disk(xpram_disks[i]);
 			goto out;
 		}
+		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, xpram_queues[i]);
 		blk_queue_make_request(xpram_queues[i], xpram_make_request);
 		blk_queue_logical_block_size(xpram_queues[i], 4096);
 	}
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index 21fabc6..6c440d4 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -352,12 +352,48 @@
 
 static DEVICE_ATTR(shared, 0444, chp_shared_show, NULL);
 
+static ssize_t chp_chid_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct channel_path *chp = to_channelpath(dev);
+	ssize_t rc;
+
+	mutex_lock(&chp->lock);
+	if (chp->desc_fmt1.flags & 0x10)
+		rc = sprintf(buf, "%04x\n", chp->desc_fmt1.chid);
+	else
+		rc = 0;
+	mutex_unlock(&chp->lock);
+
+	return rc;
+}
+static DEVICE_ATTR(chid, 0444, chp_chid_show, NULL);
+
+static ssize_t chp_chid_external_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct channel_path *chp = to_channelpath(dev);
+	ssize_t rc;
+
+	mutex_lock(&chp->lock);
+	if (chp->desc_fmt1.flags & 0x10)
+		rc = sprintf(buf, "%x\n", chp->desc_fmt1.flags & 0x8 ? 1 : 0);
+	else
+		rc = 0;
+	mutex_unlock(&chp->lock);
+
+	return rc;
+}
+static DEVICE_ATTR(chid_external, 0444, chp_chid_external_show, NULL);
+
 static struct attribute *chp_attrs[] = {
 	&dev_attr_status.attr,
 	&dev_attr_configure.attr,
 	&dev_attr_type.attr,
 	&dev_attr_cmg.attr,
 	&dev_attr_shared.attr,
+	&dev_attr_chid.attr,
+	&dev_attr_chid_external.attr,
 	NULL,
 };
 static struct attribute_group chp_attr_group = {
diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
index 349d5fc..e7ef2a6 100644
--- a/drivers/s390/cio/chsc.h
+++ b/drivers/s390/cio/chsc.h
@@ -43,7 +43,9 @@
 	u8 chpid;
 	u32:24;
 	u8 chpp;
-	u32 unused[3];
+	u32 unused[2];
+	u16 chid;
+	u32:16;
 	u16 mdc;
 	u16:13;
 	u8 r:1;
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 4e8a179..aefe820 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -72,10 +72,10 @@
 
 source "drivers/staging/iio/Kconfig"
 
-source "drivers/staging/zram/Kconfig"
-
 source "drivers/staging/zsmalloc/Kconfig"
 
+source "drivers/staging/zram/Kconfig"
+
 source "drivers/staging/wlags49_h2/Kconfig"
 
 source "drivers/staging/wlags49_h25/Kconfig"
diff --git a/drivers/staging/android/logger.c b/drivers/staging/android/logger.c
index b040200..9bd8747 100644
--- a/drivers/staging/android/logger.c
+++ b/drivers/staging/android/logger.c
@@ -242,7 +242,7 @@
  * 'log->buffer' which contains the first entry readable by 'euid'
  */
 static size_t get_next_entry_by_uid(struct logger_log *log,
-		size_t off, uid_t euid)
+		size_t off, kuid_t euid)
 {
 	while (off != log->w_off) {
 		struct logger_entry *entry;
@@ -251,7 +251,7 @@
 
 		entry = get_entry_header(log, off, &scratch);
 
-		if (entry->euid == euid)
+		if (uid_eq(entry->euid, euid))
 			return off;
 
 		next_len = sizeof(struct logger_entry) + entry->len;
diff --git a/drivers/staging/android/logger.h b/drivers/staging/android/logger.h
index cc6bbd9..70af7d8 100644
--- a/drivers/staging/android/logger.h
+++ b/drivers/staging/android/logger.h
@@ -66,7 +66,7 @@
 	__s32		tid;
 	__s32		sec;
 	__s32		nsec;
-	uid_t		euid;
+	kuid_t		euid;
 	char		msg[0];
 };
 
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 7871579..87e852a 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -981,6 +981,7 @@
 
 config COMEDI_NI_6527
 	tristate "NI 6527 support"
+	depends on HAS_DMA
 	select COMEDI_MITE
 	---help---
 	  Enable support for the National Instruments 6527 PCI card
@@ -990,6 +991,7 @@
 
 config COMEDI_NI_65XX
 	tristate "NI 65xx static dio PCI card support"
+	depends on HAS_DMA
 	select COMEDI_MITE
 	---help---
 	  Enable support for National Instruments 65xx static dio boards.
@@ -1003,6 +1005,7 @@
 
 config COMEDI_NI_660X
 	tristate "NI 660x counter/timer PCI card support"
+	depends on HAS_DMA
 	select COMEDI_NI_TIOCMD
 	---help---
 	  Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
@@ -1013,6 +1016,7 @@
 
 config COMEDI_NI_670X
 	tristate "NI 670x PCI card support"
+	depends on HAS_DMA
 	select COMEDI_MITE
 	---help---
 	  Enable support for National Instruments PCI-6703 and PCI-6704
@@ -1022,6 +1026,7 @@
 
 config COMEDI_NI_LABPC_PCI
 	tristate "NI Lab-PC PCI-1200 support"
+	depends on HAS_DMA
 	select COMEDI_NI_LABPC
 	select COMEDI_MITE
 	---help---
@@ -1032,6 +1037,7 @@
 
 config COMEDI_NI_PCIDIO
 	tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
+	depends on HAS_DMA
 	select COMEDI_MITE
 	select COMEDI_8255
 	---help---
@@ -1043,6 +1049,7 @@
 
 config COMEDI_NI_PCIMIO
 	tristate "NI PCI-MIO-E series and M series support"
+	depends on HAS_DMA
 	select COMEDI_NI_TIOCMD
 	select COMEDI_8255
 	select COMEDI_FC
@@ -1095,10 +1102,12 @@
 	  called ssv_dnp.
 
 config COMEDI_MITE
+	depends on HAS_DMA
 	tristate
 
 config COMEDI_NI_TIOCMD
 	tristate
+	depends on HAS_DMA
 	select COMEDI_NI_TIO
 	select COMEDI_MITE
 
diff --git a/drivers/staging/comedi/comedi_buf.c b/drivers/staging/comedi/comedi_buf.c
index ca70990..d4be0e6 100644
--- a/drivers/staging/comedi/comedi_buf.c
+++ b/drivers/staging/comedi/comedi_buf.c
@@ -51,10 +51,12 @@
 			clear_bit(PG_reserved,
 				  &(virt_to_page(buf->virt_addr)->flags));
 			if (s->async_dma_dir != DMA_NONE) {
+#ifdef CONFIG_HAS_DMA
 				dma_free_coherent(dev->hw_dev,
 						  PAGE_SIZE,
 						  buf->virt_addr,
 						  buf->dma_addr);
+#endif
 			} else {
 				free_page((unsigned long)buf->virt_addr);
 			}
@@ -74,6 +76,12 @@
 	struct comedi_buf_page *buf;
 	unsigned i;
 
+	if (!IS_ENABLED(CONFIG_HAS_DMA) && s->async_dma_dir != DMA_NONE) {
+		dev_err(dev->class_dev,
+			"dma buffer allocation not supported\n");
+		return;
+	}
+
 	async->buf_page_list = vzalloc(sizeof(*buf) * n_pages);
 	if (async->buf_page_list)
 		pages = vmalloc(sizeof(struct page *) * n_pages);
@@ -84,11 +92,15 @@
 	for (i = 0; i < n_pages; i++) {
 		buf = &async->buf_page_list[i];
 		if (s->async_dma_dir != DMA_NONE)
+#ifdef CONFIG_HAS_DMA
 			buf->virt_addr = dma_alloc_coherent(dev->hw_dev,
 							    PAGE_SIZE,
 							    &buf->dma_addr,
 							    GFP_KERNEL |
 							    __GFP_COMP);
+#else
+			break;
+#endif
 		else
 			buf->virt_addr = (void *)get_zeroed_page(GFP_KERNEL);
 		if (!buf->virt_addr)
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index 00f2547..924c54c 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -246,9 +246,6 @@
 		return -EBUSY;
 	}
 
-	if (!async->prealloc_buf)
-		return -EINVAL;
-
 	/* make sure buffer is an integral number of pages
 	 * (we round up) */
 	new_size = (new_size + PAGE_SIZE - 1) & PAGE_MASK;
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 3d978f3..77a7bb6 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -976,8 +976,7 @@
 		/* clear flip-flop to make sure 2-byte registers for
 		 * count and address get set correctly */
 		clear_dma_ff(devpriv->dma_chan);
-		set_dma_addr(devpriv->dma_chan,
-			     virt_to_bus(devpriv->dma_buffer));
+		set_dma_addr(devpriv->dma_chan, devpriv->dma_addr);
 		/*  set appropriate size of transfer */
 		devpriv->dma_transfer_size = labpc_suggest_transfer_size(cmd);
 		if (cmd->stop_src == TRIG_COUNT &&
@@ -1089,7 +1088,7 @@
 		devpriv->count -= num_points;
 
 	/*  set address and count for next transfer */
-	set_dma_addr(devpriv->dma_chan, virt_to_bus(devpriv->dma_buffer));
+	set_dma_addr(devpriv->dma_chan, devpriv->dma_addr);
 	set_dma_count(devpriv->dma_chan, leftover * sample_size);
 	release_dma_lock(flags);
 
@@ -1741,6 +1740,9 @@
 				unsigned long dma_flags;
 
 				devpriv->dma_chan = dma_chan;
+				devpriv->dma_addr =
+					virt_to_bus(devpriv->dma_buffer);
+
 				dma_flags = claim_dma_lock();
 				disable_dma(devpriv->dma_chan);
 				set_dma_mode(devpriv->dma_chan, DMA_MODE_READ);
diff --git a/drivers/staging/comedi/drivers/ni_labpc.h b/drivers/staging/comedi/drivers/ni_labpc.h
index 615f16f..4b691f5 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.h
+++ b/drivers/staging/comedi/drivers/ni_labpc.h
@@ -82,6 +82,7 @@
 	unsigned int divisor_b1;
 	unsigned int dma_chan;	/*  dma channel to use */
 	u16 *dma_buffer;	/*  buffer ai will dma into */
+	phys_addr_t dma_addr;
 	/* transfer size in bytes for current transfer */
 	unsigned int dma_transfer_size;
 	/* we are using dma/fifo-half-full/etc. */
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index a46d579..8c5dee9 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -310,9 +310,11 @@
 static int ni_gpct_insn_config(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
 			       struct comedi_insn *insn, unsigned int *data);
+#ifdef PCIDMA
 static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
 static int ni_gpct_cmdtest(struct comedi_device *dev,
 			   struct comedi_subdevice *s, struct comedi_cmd *cmd);
+#endif
 static int ni_gpct_cancel(struct comedi_device *dev,
 			  struct comedi_subdevice *s);
 static void handle_gpct_interrupt(struct comedi_device *dev,
@@ -4617,9 +4619,7 @@
 	for (j = 0; j < NUM_GPCT; ++j) {
 		s = &dev->subdevices[NI_GPCT_SUBDEV(j)];
 		s->type = COMEDI_SUBD_COUNTER;
-		s->subdev_flags =
-		    SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL | SDF_CMD_READ
-		    /* | SDF_CMD_WRITE */ ;
+		s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL;
 		s->n_chan = 3;
 		if (board->reg_type & ni_reg_m_series_mask)
 			s->maxdata = 0xffffffff;
@@ -4628,11 +4628,14 @@
 		s->insn_read = &ni_gpct_insn_read;
 		s->insn_write = &ni_gpct_insn_write;
 		s->insn_config = &ni_gpct_insn_config;
+#ifdef PCIDMA
+		s->subdev_flags |= SDF_CMD_READ /* | SDF_CMD_WRITE */;
 		s->do_cmd = &ni_gpct_cmd;
 		s->len_chanlist = 1;
 		s->do_cmdtest = &ni_gpct_cmdtest;
 		s->cancel = &ni_gpct_cancel;
 		s->async_dma_dir = DMA_BIDIRECTIONAL;
+#endif
 		s->private = &devpriv->counter_dev->counters[j];
 
 		devpriv->counter_dev->counters[j].chip_index = 0;
@@ -5216,10 +5219,10 @@
 	return ni_tio_winsn(counter, insn, data);
 }
 
+#ifdef PCIDMA
 static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int retval;
-#ifdef PCIDMA
 	struct ni_gpct *counter = s->private;
 /* const struct comedi_cmd *cmd = &s->async->cmd; */
 
@@ -5233,23 +5236,20 @@
 	ni_tio_acknowledge_and_confirm(counter, NULL, NULL, NULL, NULL);
 	ni_e_series_enable_second_irq(dev, counter->counter_index, 1);
 	retval = ni_tio_cmd(counter, s->async);
-#else
-	retval = -ENOTSUPP;
-#endif
 	return retval;
 }
+#endif
 
+#ifdef PCIDMA
 static int ni_gpct_cmdtest(struct comedi_device *dev,
 			   struct comedi_subdevice *s, struct comedi_cmd *cmd)
 {
-#ifdef PCIDMA
 	struct ni_gpct *counter = s->private;
 
 	return ni_tio_cmdtest(counter, cmd);
-#else
 	return -ENOTSUPP;
-#endif
 }
+#endif
 
 static int ni_gpct_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
diff --git a/drivers/staging/dwc2/Kconfig b/drivers/staging/dwc2/Kconfig
index f0b4739..d15d9d5 100644
--- a/drivers/staging/dwc2/Kconfig
+++ b/drivers/staging/dwc2/Kconfig
@@ -2,7 +2,6 @@
 	tristate "DesignWare USB2 DRD Core Support"
 	depends on USB
 	depends on VIRT_TO_BUS
-	select USB_OTG_UTILS
 	help
 	  Say Y or M here if your system has a Dual Role HighSpeed
 	  USB controller based on the DesignWare HSOTG IP Core.
@@ -39,6 +38,7 @@
 	bool "Enable Missed SOF Tracking"
 	help
 	  Say Y here to enable logging of missed SOF events to the dmesg log.
+	  WARNING: This feature is still experimental.
 	  If in doubt, say N.
 
 config USB_DWC2_DEBUG_PERIODIC
diff --git a/drivers/staging/dwc2/hcd_intr.c b/drivers/staging/dwc2/hcd_intr.c
index 6e5dbed..e24062f 100644
--- a/drivers/staging/dwc2/hcd_intr.c
+++ b/drivers/staging/dwc2/hcd_intr.c
@@ -56,8 +56,6 @@
 static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg)
 {
 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
-#warning Compiling code to track missed SOFs
-
 	u16 curr_frame_number = hsotg->frame_number;
 
 	if (hsotg->frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
diff --git a/drivers/staging/dwc2/platform.c b/drivers/staging/dwc2/platform.c
index b610960..44cce2f 100644
--- a/drivers/staging/dwc2/platform.c
+++ b/drivers/staging/dwc2/platform.c
@@ -95,6 +95,14 @@
 
 	hsotg->dev = &dev->dev;
 
+	/*
+	 * Use reasonable defaults so platforms don't have to provide these.
+	 */
+	if (!dev->dev.dma_mask)
+		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+	if (!dev->dev.coherent_dma_mask)
+		dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
 	irq = platform_get_irq(dev, 0);
 	if (irq < 0) {
 		dev_err(&dev->dev, "missing IRQ resource\n");
diff --git a/drivers/staging/gdm72xx/Kconfig b/drivers/staging/gdm72xx/Kconfig
index 3c18efe..6905913 100644
--- a/drivers/staging/gdm72xx/Kconfig
+++ b/drivers/staging/gdm72xx/Kconfig
@@ -39,7 +39,7 @@
 
 config WIMAX_GDM72XX_USB_PM
 	bool "Enable power managerment support"
-	depends on USB_SUSPEND
+	depends on PM_RUNTIME
 
 endif # WIMAX_GDM72XX_USB
 
diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
index 2856b8f..163c638 100644
--- a/drivers/staging/iio/adc/mxs-lradc.c
+++ b/drivers/staging/iio/adc/mxs-lradc.c
@@ -690,7 +690,6 @@
 static int mxs_lradc_buffer_preenable(struct iio_dev *iio)
 {
 	struct mxs_lradc *lradc = iio_priv(iio);
-	struct iio_buffer *buffer = iio->buffer;
 	int ret = 0, chan, ofs = 0;
 	unsigned long enable = 0;
 	uint32_t ctrl4_set = 0;
@@ -698,7 +697,7 @@
 	uint32_t ctrl1_irq = 0;
 	const uint32_t chan_value = LRADC_CH_ACCUMULATE |
 		((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET);
-	const int len = bitmap_weight(buffer->scan_mask, LRADC_MAX_TOTAL_CHANS);
+	const int len = bitmap_weight(iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS);
 
 	if (!len)
 		return -EINVAL;
@@ -725,7 +724,7 @@
 		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
 	writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
 
-	for_each_set_bit(chan, buffer->scan_mask, LRADC_MAX_TOTAL_CHANS) {
+	for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
 		ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs);
 		ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs);
 		ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs);
diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c
index d060f25..c99f890 100644
--- a/drivers/staging/iio/light/tsl2x7x_core.c
+++ b/drivers/staging/iio/light/tsl2x7x_core.c
@@ -1869,6 +1869,7 @@
 		dev_info(&chip->client->dev,
 				"%s: i2c device found does not match expected id\n",
 				__func__);
+		ret = -EINVAL;
 		goto fail1;
 	}
 
@@ -1907,7 +1908,7 @@
 		if (ret) {
 			dev_err(&clientp->dev,
 				"%s: irq request failed", __func__);
-			goto fail2;
+			goto fail1;
 		}
 	}
 
@@ -1920,17 +1921,17 @@
 	if (ret) {
 		dev_err(&clientp->dev,
 			"%s: iio registration failed\n", __func__);
-		goto fail1;
+		goto fail2;
 	}
 
 	dev_info(&clientp->dev, "%s Light sensor found.\n", id->name);
 
 	return 0;
 
-fail1:
+fail2:
 	if (clientp->irq)
 		free_irq(clientp->irq, indio_dev);
-fail2:
+fail1:
 	iio_device_free(indio_dev);
 
 	return ret;
diff --git a/drivers/staging/imx-drm/Kconfig b/drivers/staging/imx-drm/Kconfig
index 8c9e403..ef699f7 100644
--- a/drivers/staging/imx-drm/Kconfig
+++ b/drivers/staging/imx-drm/Kconfig
@@ -1,6 +1,7 @@
 config DRM_IMX
 	tristate "DRM Support for Freescale i.MX"
 	select DRM_KMS_HELPER
+	select VIDEOMODE_HELPERS
 	select DRM_GEM_CMA_HELPER
 	select DRM_KMS_CMA_HELPER
 	depends on DRM && (ARCH_MXC || ARCH_MULTIPLATFORM)
@@ -19,10 +20,12 @@
 config DRM_IMX_PARALLEL_DISPLAY
 	tristate "Support for parallel displays"
 	depends on DRM_IMX
+	select VIDEOMODE_HELPERS
 
 config DRM_IMX_TVE
 	tristate "Support for TV and VGA displays"
 	depends on DRM_IMX
+	select REGMAP_MMIO
 	help
 	  Choose this to enable the internal Television Encoder (TVe)
 	  found on i.MX53 processors.
@@ -30,6 +33,7 @@
 config DRM_IMX_IPUV3_CORE
 	tristate "IPUv3 core support"
 	depends on DRM_IMX
+	depends on RESET_CONTROLLER
 	help
 	  Choose this if you have a i.MX5/6 system and want
 	  to use the IPU. This option only enables IPU base
@@ -38,5 +42,6 @@
 config DRM_IMX_IPUV3
 	tristate "DRM Support for i.MX IPUv3"
 	depends on DRM_IMX
+	depends on DRM_IMX_IPUV3_CORE
 	help
 	  Choose this if you have a i.MX5 or i.MX6 processor.
diff --git a/drivers/staging/imx-drm/imx-tve.c b/drivers/staging/imx-drm/imx-tve.c
index ac16344..03892de 100644
--- a/drivers/staging/imx-drm/imx-tve.c
+++ b/drivers/staging/imx-drm/imx-tve.c
@@ -670,7 +670,9 @@
 	tve->dac_reg = devm_regulator_get(&pdev->dev, "dac");
 	if (!IS_ERR(tve->dac_reg)) {
 		regulator_set_voltage(tve->dac_reg, 2750000, 2750000);
-		regulator_enable(tve->dac_reg);
+		ret = regulator_enable(tve->dac_reg);
+		if (ret)
+			return ret;
 	}
 
 	tve->clk = devm_clk_get(&pdev->dev, "tve");
diff --git a/drivers/staging/media/solo6x10/Kconfig b/drivers/staging/media/solo6x10/Kconfig
index ec32776..df6569b 100644
--- a/drivers/staging/media/solo6x10/Kconfig
+++ b/drivers/staging/media/solo6x10/Kconfig
@@ -1,6 +1,7 @@
 config SOLO6X10
 	tristate "Softlogic 6x10 MPEG codec cards"
 	depends on PCI && VIDEO_DEV && SND && I2C
+	depends on FONTS
 	select VIDEOBUF2_DMA_SG
 	select VIDEOBUF2_DMA_CONTIG
 	select SND_PCM
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index 863b22e..197c393 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -124,6 +124,20 @@
 EXPORT_SYMBOL_GPL(nvec_register_notifier);
 
 /**
+ * nvec_unregister_notifier - Unregister a notifier with nvec
+ * @nvec: A &struct nvec_chip
+ * @nb: The notifier block to unregister
+ *
+ * Unregisters a notifier with @nvec. The notifier will be removed from the
+ * atomic notifier chain.
+ */
+int nvec_unregister_notifier(struct nvec_chip *nvec, struct notifier_block *nb)
+{
+	return atomic_notifier_chain_unregister(&nvec->notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(nvec_unregister_notifier);
+
+/**
  * nvec_status_notifier - The final notifier
  *
  * Prints a message about control events not handled in the notifier
@@ -185,7 +199,7 @@
  *
  * Free the given message
  */
-inline void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg)
+void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg)
 {
 	if (msg != &nvec->tx_scratch)
 		dev_vdbg(nvec->dev, "INFO: Free %ti\n", msg - nvec->msg_pool);
@@ -810,7 +824,7 @@
 		return -ENODEV;
 	}
 
-	i2c_clk = clk_get(&pdev->dev, "div-clk");
+	i2c_clk = devm_clk_get(&pdev->dev, "div-clk");
 	if (IS_ERR(i2c_clk)) {
 		dev_err(nvec->dev, "failed to get controller clock\n");
 		return -ENODEV;
@@ -897,8 +911,11 @@
 
 	nvec_toggle_global_events(nvec, false);
 	mfd_remove_devices(nvec->dev);
+	nvec_unregister_notifier(nvec, &nvec->nvec_status_notifier);
 	cancel_work_sync(&nvec->rx_work);
 	cancel_work_sync(&nvec->tx_work);
+	/* FIXME: needs check wether nvec is responsible for power off */
+	pm_power_off = NULL;
 
 	return 0;
 }
diff --git a/drivers/staging/nvec/nvec.h b/drivers/staging/nvec/nvec.h
index b7a14bc..2b1316d 100644
--- a/drivers/staging/nvec/nvec.h
+++ b/drivers/staging/nvec/nvec.h
@@ -197,9 +197,8 @@
 				  struct notifier_block *nb,
 				  unsigned int events);
 
-extern int nvec_unregister_notifier(struct device *dev,
-				    struct notifier_block *nb,
-				    unsigned int events);
+extern int nvec_unregister_notifier(struct nvec_chip *dev,
+				    struct notifier_block *nb);
 
 extern void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg);
 
diff --git a/drivers/staging/nvec/nvec_kbd.c b/drivers/staging/nvec/nvec_kbd.c
index 7445ce6..a0ec52a 100644
--- a/drivers/staging/nvec/nvec_kbd.c
+++ b/drivers/staging/nvec/nvec_kbd.c
@@ -169,8 +169,15 @@
 
 static int nvec_kbd_remove(struct platform_device *pdev)
 {
+	struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent);
+	char disable_kbd[] = { NVEC_KBD, DISABLE_KBD },
+	     uncnfg_wake_key_reporting[] = { NVEC_KBD, CNFG_WAKE_KEY_REPORTING,
+						false };
+	nvec_write_async(nvec, uncnfg_wake_key_reporting, 3);
+	nvec_write_async(nvec, disable_kbd, 2);
+	nvec_unregister_notifier(nvec, &keys_dev.notifier);
+
 	input_unregister_device(keys_dev.input);
-	input_free_device(keys_dev.input);
 
 	return 0;
 }
@@ -188,4 +195,5 @@
 
 MODULE_AUTHOR("Marc Dietrich <marvin24@gmx.de>");
 MODULE_DESCRIPTION("NVEC keyboard driver");
+MODULE_ALIAS("platform:nvec-kbd");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/nvec/nvec_power.c b/drivers/staging/nvec/nvec_power.c
index 296f7b9..aacfcd6 100644
--- a/drivers/staging/nvec/nvec_power.c
+++ b/drivers/staging/nvec/nvec_power.c
@@ -414,6 +414,7 @@
 	struct nvec_power *power = platform_get_drvdata(pdev);
 
 	cancel_delayed_work_sync(&power->poller);
+	nvec_unregister_notifier(power->nvec, &power->notifier);
 	switch (pdev->id) {
 	case AC:
 		power_supply_unregister(&nvec_psy);
diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c
index aff6b9b..06dbb02 100644
--- a/drivers/staging/nvec/nvec_ps2.c
+++ b/drivers/staging/nvec/nvec_ps2.c
@@ -106,7 +106,7 @@
 	struct serio *ser_dev;
 	char mouse_reset[] = { NVEC_PS2, SEND_COMMAND, PSMOUSE_RST, 3 };
 
-	ser_dev = devm_kzalloc(&pdev->dev, sizeof(struct serio), GFP_KERNEL);
+	ser_dev = kzalloc(sizeof(struct serio), GFP_KERNEL);
 	if (ser_dev == NULL)
 		return -ENOMEM;
 
@@ -133,6 +133,11 @@
 
 static int nvec_mouse_remove(struct platform_device *pdev)
 {
+	struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent);
+
+	ps2_sendcommand(ps2_dev.ser_dev, DISABLE_MOUSE);
+	ps2_stopstreaming(ps2_dev.ser_dev);
+	nvec_unregister_notifier(nvec, &ps2_dev.notifier);
 	serio_unregister_port(ps2_dev.ser_dev);
 
 	return 0;
@@ -179,4 +184,5 @@
 
 MODULE_DESCRIPTION("NVEC mouse driver");
 MODULE_AUTHOR("Marc Dietrich <marvin24@gmx.de>");
+MODULE_ALIAS("platform:nvec-mouse");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/sep/Kconfig b/drivers/staging/sep/Kconfig
index 185b676..aab945a 100644
--- a/drivers/staging/sep/Kconfig
+++ b/drivers/staging/sep/Kconfig
@@ -1,6 +1,6 @@
 config DX_SEP
 	tristate "Discretix SEP driver"
-	depends on PCI
+	depends on PCI && CRYPTO
 	help
 	  Discretix SEP driver; used for the security processor subsystem
 	  on board the Intel Mobile Internet Device and adds SEP availability
diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
index fe667dd..386362c 100644
--- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
+++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
@@ -1087,7 +1087,11 @@
 	unsigned char intr_status;
 	struct synaptics_rmi4_data *rmi4_data = dev_get_drvdata(dev);
 
-	regulator_enable(rmi4_data->regulator);
+	retval = regulator_enable(rmi4_data->regulator);
+	if (retval) {
+		dev_err(dev, "Regulator enable failed (%d)\n", retval);
+		return retval;
+	}
 
 	enable_irq(rmi4_data->i2c_client->irq);
 	rmi4_data->touch_stopped = false;
diff --git a/drivers/staging/vt6656/hostap.c b/drivers/staging/vt6656/hostap.c
index f4f1bf7..c699a30 100644
--- a/drivers/staging/vt6656/hostap.c
+++ b/drivers/staging/vt6656/hostap.c
@@ -133,7 +133,7 @@
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
 		       pDevice->dev->name, pDevice->apdev->name);
 	}
-	kfree(pDevice->apdev);
+	free_netdev(pDevice->apdev);
 	pDevice->apdev = NULL;
     pDevice->bEnable8021x = false;
     pDevice->bEnableHostWEP = false;
diff --git a/drivers/staging/vt6656/iwctl.c b/drivers/staging/vt6656/iwctl.c
index c335808..d0cf7d8 100644
--- a/drivers/staging/vt6656/iwctl.c
+++ b/drivers/staging/vt6656/iwctl.c
@@ -1345,9 +1345,12 @@
 		return rc;
 	}
 
+	spin_lock_irq(&pDevice->lock);
+
 	if (wrq->disabled) {
 		pDevice->ePSMode = WMAC_POWER_CAM;
 		PSvDisablePowerSaving(pDevice);
+		spin_unlock_irq(&pDevice->lock);
 		return rc;
 	}
 	if ((wrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
@@ -1358,6 +1361,9 @@
 		pDevice->ePSMode = WMAC_POWER_FAST;
 		PSvEnablePowerSaving((void *)pDevice, pMgmt->wListenInterval);
 	}
+
+	spin_unlock_irq(&pDevice->lock);
+
 	switch (wrq->flags & IW_POWER_MODE) {
 	case IW_POWER_UNICAST_R:
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_UNICAST_R \n");
diff --git a/drivers/staging/zcache/ramster/ramster-howto.txt b/drivers/staging/zcache/ramster/ramster-howto.txt
new file mode 100644
index 0000000..7b1ee3b
--- /dev/null
+++ b/drivers/staging/zcache/ramster/ramster-howto.txt
@@ -0,0 +1,366 @@
+			RAMSTER HOW-TO
+
+Author: Dan Magenheimer
+Ramster maintainer: Konrad Wilk <konrad.wilk@oracle.com>
+
+This is a HOWTO document for ramster which, as of this writing, is in
+the kernel as a subdirectory of zcache in drivers/staging, called ramster.
+(Zcache can be built with or without ramster functionality.)  If enabled
+and properly configured, ramster allows memory capacity load balancing
+across multiple machines in a cluster.  Further, the ramster code serves
+as an example of asynchronous access for zcache (as well as cleancache and
+frontswap) that may prove useful for future transcendent memory
+implementations, such as KVM and NVRAM.  While ramster works today on
+any network connection that supports kernel sockets, its features may
+become more interesting on future high-speed fabrics/interconnects.
+
+Ramster requires both kernel and userland support.  The userland support,
+called ramster-tools, is known to work with EL6-based distros, but is a
+set of poorly-hacked slightly-modified cluster tools based on ocfs2, which
+includes an init file, a config file, and a userland binary that interfaces
+to the kernel.  This state of userland support reflects the abysmal userland
+skills of this suitably-embarrassed author; any help/patches to turn
+ramster-tools into more distributable rpms/debs useful for a wider range
+of distros would be appreciated.  The source RPM that can be used as a
+starting point is available at:
+    http://oss.oracle.com/projects/tmem/files/RAMster/ 
+
+As a result of this author's ignorance, userland setup described in this
+HOWTO assumes an EL6 distro and is described in EL6 syntax.  Apologies
+if this offends anyone!
+
+Kernel support has only been tested on x86_64.  Systems with an active
+ocfs2 filesystem should work, but since ramster leverages a lot of
+code from ocfs2, there may be latent issues.  A kernel configuration that
+includes CONFIG_OCFS2_FS should build OK, and should certainly run OK
+if no ocfs2 filesystem is mounted.
+
+This HOWTO demonstrates memory capacity load balancing for a two-node
+cluster, where one node called the "local" node becomes overcommitted
+and the other node called the "remote" node provides additional RAM
+capacity for use by the local node.  Ramster is capable of more complex
+topologies; see the last section titled "ADVANCED RAMSTER TOPOLOGIES".
+
+If you find any terms in this HOWTO unfamiliar or don't understand the
+motivation for ramster, the following LWN reading is recommended:
+-- Transcendent Memory in a Nutshell (lwn.net/Articles/454795)
+-- The future calculus of memory management (lwn.net/Articles/475681)
+And since ramster is built on top of zcache, this article may be helpful:
+-- In-kernel memory compression (lwn.net/Articles/545244)
+
+Now that you've memorized the contents of those articles, let's get started!
+
+A. PRELIMINARY
+
+1) Install two x86_64 Linux systems that are known to work when
+   upgraded to a recent upstream Linux kernel version.
+
+On each system:
+
+2) Configure, build and install, then boot Linux, just to ensure it
+   can be done with an unmodified upstream kernel.  Confirm you booted
+   the upstream kernel with "uname -a".
+
+3) If you plan to do any performance testing or unless you plan to
+   test only swapping, the "WasActive" patch is also highly recommended.
+   (Search lkml.org for WasActive, apply the patch, rebuild your kernel.)
+   For a demo or simple testing, the patch can be ignored.
+
+4) Install ramster-tools as root.  An x86_64 rpm for EL6-based systems
+   can be found at:
+    http://oss.oracle.com/projects/tmem/files/RAMster/ 
+   (Sorry but for now, non-EL6 users must recreate ramster-tools on
+   their own from source.  See above.)
+
+5) Ensure that debugfs is mounted at each boot.  Examples below assume it
+   is mounted at /sys/kernel/debug.
+
+B. BUILDING RAMSTER INTO THE KERNEL
+
+Do the following on each system:
+
+1) Using the kernel configuration mechanism of your choice, change
+   your config to include:
+
+	CONFIG_CLEANCACHE=y
+	CONFIG_FRONTSWAP=y
+	CONFIG_STAGING=y
+	CONFIG_CONFIGFS_FS=y # NOTE: MUST BE y, not m
+	CONFIG_ZCACHE=y
+	CONFIG_RAMSTER=y
+
+   For a linux-3.10 or later kernel, you should also set:
+
+	CONFIG_ZCACHE_DEBUG=y
+	CONFIG_RAMSTER_DEBUG=y
+
+   Before building the kernel please doublecheck your kernel config
+   file to ensure all of the settings are correct.
+
+2) Build this kernel and change your boot file (e.g. /etc/grub.conf)
+   so that the new kernel will boot.
+
+3) Add "zcache" and "ramster" as kernel boot parameters for the new kernel.
+
+4) Reboot each system approximately simultaneously.
+
+5) Check dmesg to ensure there are some messages from ramster, prefixed
+   by "ramster:"
+
+	# dmesg | grep ramster
+
+   You should also see a lot of files in:
+
+	# ls /sys/kernel/debug/zcache
+	# ls /sys/kernel/debug/ramster
+
+   These are mostly counters for various zcache and ramster activities.
+   You should also see files in:
+
+	# ls /sys/kernel/mm/ramster
+
+   These are sysfs files that control ramster as we shall see.
+
+   Ramster now will act as a single-system zcache on each system
+   but doesn't yet know anything about the cluster so can't yet do
+   anything remotely.
+
+C. CONFIGURING THE RAMSTER CLUSTER
+
+This part can be error prone unless you are familiar with clustering
+filesystems.  We need to describe the cluster in a /etc/ramster.conf
+file and the init scripts that parse it are extremely picky about
+the syntax.
+
+1) Create a /etc/ramster.conf file and ensure it is identical on both
+   systems.  This file mimics the ocfs2 format and there is a good amount
+   of documentation that can be searched for ocfs2.conf, but you can use:
+
+	cluster:
+		name = ramster
+		node_count = 2
+	node:
+		name = system1
+		cluster = ramster
+		number = 0
+		ip_address = my.ip.ad.r1
+		ip_port = 7777
+	node:
+		name = system2
+		cluster = ramster
+		number = 1
+		ip_address = my.ip.ad.r2
+		ip_port = 7777
+
+   You must ensure that the "name" field in the file exactly matches
+   the output of "hostname" on each system; if "hostname" shows a
+   fully-qualified hostname, ensure the name is fully qualified in
+   /etc/ramster.conf.  Obviously, substitute my.ip.ad.rx with proper
+   ip addresses.
+
+2) Enable the ramster service and configure it.  If you used the
+   EL6 ramster-tools, this would be:
+
+	# chkconfig --add ramster
+	# service ramster configure
+
+   Set "load on boot" to "y", cluster to start is "ramster" (or whatever
+   name you chose in ramster.conf), heartbeat dead threshold as "500",
+   network idle timeout as "1000000".  Leave the others as default.
+
+3) Reboot both systems.  After reboot, try (assuming EL6 ramster-tools):
+
+	# service ramster status
+
+   You should see "Checking RAMSTER cluster "ramster": Online".  If you do
+   not, something is wrong and ramster will not work.  Note that you
+   should also see that the driver for "configfs" is loaded and mounted,
+   the driver for ocfs2_dlmfs is not loaded, and some numbers for network
+   parameters.  You will also see "Checking RAMSTER heartbeat: Not active".
+   That's all OK.
+
+4) Now you need to start the cluster heartbeat; the cluster is not "up"
+   until all nodes detect a heartbeat.  In a real cluster, heartbeat detection
+   is done via a cluster filesystem, but ramster doesn't require one.  Some
+   hack-y kernel code in ramster can start the heartbeat for you though if
+   you tell it what nodes are "up".  To enable the heartbeat, do:
+
+	# echo 0 > /sys/kernel/mm/ramster/manual_node_up
+	# echo 1 > /sys/kernel/mm/ramster/manual_node_up
+
+   This must be done on BOTH nodes and, to avoid timeouts, must be done
+   approximately concurrently on both nodes.  On an EL6 system, it is
+   convenient to put these lines in /etc/rc.local.  To confirm that the
+   cluster is now up, on both systems do:
+
+	# dmesg | grep ramster
+
+   You should see ramster "Accepted connection" messages in dmesg on both
+   nodes after this.  Note that if you check userland status again with
+
+	# service ramster status
+
+   you will still see "Checking RAMSTER heartbeat: Not active".  That's
+   still OK... the ramster kernel heartbeat hack doesn't communicate to
+   userland.
+
+5) You now must tell each node the node to which it should "remotify" pages.
+   On this two node cluster, we will assume the "local" node, node 0, has
+   memory overcommitted and will use ramster to utilize RAM capacity on
+   the "remote node", node 1.  To configure this, on node 0, you do:
+
+	# echo 1 > /sys/kernel/mm/ramster/remote_target_nodenum
+
+   You should see "ramster: node 1 set as remotification target" in dmesg
+   on node 0.  Again, on EL6, /etc/rc.local is a good place to put this
+   on node 0 so you don't forget to do it at each boot.
+
+6) One more step:  By default, the ramster code does not "remotify" any
+   pages; this is primarily for testing purposes, but sometimes it is
+   useful.  This may change in the future, but for now, on node 0, you do:
+
+	# echo 1 > /sys/kernel/mm/ramster/pers_remotify_enable
+	# echo 1 > /sys/kernel/mm/ramster/eph_remotify_enable
+
+   The first enables remotifying swap (persistent, aka frontswap) pages,
+   the second enables remotifying of page cache (ephemeral, cleancache)
+   pages.
+
+   On EL6, these lines can also be put in /etc/rc.local (AFTER the
+   node_up lines), or at the beginning of a script that runs a workload.
+
+7) Note that most testing has been done with both/all machines booted
+   roughly simultaneously to avoid cluster timeouts.  Ideally, you should
+   do this too unless you are trying to break ramster rather than just
+   use it. ;-)
+
+D. TESTING RAMSTER
+
+1) Note that ramster has no value unless pages get "remotified".  For
+   swap/frontswap/persistent pages, this doesn't happen unless/until
+   the workload would cause swapping to occur, at which point pages
+   are put into frontswap/zcache, and the remotification thread starts
+   working.  To get to the point where the system swaps, you either
+   need a workload for which the working set exceeds the RAM in the
+   system; or you need to somehow reduce the amount of RAM one of
+   the system sees.  This latter is easy when testing in a VM, but
+   harder on physical systems.  In some cases, "mem=xxxM" on the
+   kernel command line restricts memory, but for some values of xxx
+   the kernel may fail to boot.  One may also try creating a fixed
+   RAMdisk, doing nothing with it, but ensuring that it eats up a fixed
+   amount of RAM.
+
+2) To see if ramster is working, on the "remote node", node 1, try:
+
+	# grep . /sys/kernel/debug/ramster/foreign_*
+        # # note, that is space-dot-space between grep and the pathname
+
+   to monitor the number (and max) ephemeral and persistent pages
+   that ramster has sent.  If these stay at zero, ramster is not working
+   either because the workload on the local node (node 0) isn't creating
+   enough memory pressure or because "remotifying" isn't working.  On the
+   local system, node 0, you can watch lots of useful information also.
+   Try:
+
+	grep . /sys/kernel/debug/zcache/*pageframes* \
+		/sys/kernel/debug/zcache/*zbytes* \
+		/sys/kernel/debug/zcache/*zpages* \
+		/sys/kernel/debug/ramster/*remote*
+
+   Of particular note are the remote_*_pages_succ_get counters.  These
+   show how many disk reads and/or disk writes have been avoided on the
+   overcommitted local system by storing pages remotely using ramster.
+
+   At the risk of information overload, you can also grep:
+
+        /sys/kernel/debug/cleancache/* and /sys/kernel/debug/frontswap/*
+
+   These show, for example, how many disk reads and/or disk writes have
+   been avoided by using zcache to optimize RAM on the local system.
+
+
+AUTOMATIC SWAP REPATRIATION
+
+You may notice that while the systems are idle, the foreign persistent
+page count on the remote machine slowly decreases.  This is because
+ramster implements "frontswap selfshrinking":  When possible, swap
+pages that have been remotified are slowly repatriated to the local
+machine.  This is so that local RAM can be used when possible and
+so that, in case of remote machine crash, the probability of loss
+of data is reduced.
+
+REBOOTING / POWEROFF
+
+If a system is shut down while some of its swap pages still reside
+on a remote system, the system may lock up during the shutdown
+sequence.  This will occur if the network is shut down before the
+swap mechansim is shut down, which is the default ordering on many
+distros.  To avoid this annoying problem, simply shut off the swap
+subsystem before starting the shutdown sequence, e.g.:
+
+	# swapoff -a
+	# reboot
+
+Ideally, this swapoff-before-ifdown ordering should be enforced permanently
+using shutdown scripts.
+
+KNOWN PROBLEMS
+
+1) You may periodically see messages such as:
+
+    ramster_r2net, message length problem
+
+   This is harmless but indicates that a node is sending messages
+   containing compressed pages that exceed the maximum for zcache
+   (PAGE_SIZE*15/16).  The sender side needs to be fixed.
+
+2) If you see a "No longer connected to node..." message or a "No connection
+   established with node X after N seconds", it is possible you may
+   be in an unrecoverable state.  If you are certain all of the
+   appropriate cluster configuration steps described above have been
+   performed, try rebooting the two servers concurrently to see if
+   the cluster starts.
+
+   Note that "Connection to node... shutdown, state 7" is an intermediate
+   connection state.  As long as you later see "Accepted connection", the
+   intermediate states are harmless.
+
+3) There are known issues in counting certain values.  As a result
+   you may see periodic warnings from the kernel.  Almost always you
+   will see "ramster: bad accounting for XXX".  There are also "WARN_ONCE"
+   messages.  If you see kernel warnings with a tombstone, please report
+   them.  They are harmless but reflect bugs that need to be eventually fixed.
+
+ADVANCED RAMSTER TOPOLOGIES
+
+The kernel code for ramster can support up to eight nodes in a cluster,
+but no testing has been done with more than three nodes.
+
+In the example described above, the "remote" node serves as a RAM
+overflow for the "local" node.  This can be made symmetric by appropriate
+settings of the sysfs remote_target_nodenum file.  For example, by setting:
+
+	# echo 1 > /sys/kernel/mm/ramster/remote_target_nodenum
+
+on node 0, and
+
+	# echo 0 > /sys/kernel/mm/ramster/remote_target_nodenum
+
+on node 1, each node can serve as a RAM overflow for the other.
+
+For more than two nodes, a "RAM server" can be configured.  For a
+three node system, set:
+
+	# echo 0 > /sys/kernel/mm/ramster/remote_target_nodenum
+
+on node 1, and
+
+	# echo 0 > /sys/kernel/mm/ramster/remote_target_nodenum
+
+on node 2.  Then node 0 is a RAM server for node 1 and node 2.
+
+In this implementation of ramster, any remote node is potentially a single
+point of failure (SPOF).  Though the probability of failure is reduced
+by automatic swap repatriation (see above), a proposed future enhancement
+to ramster improves high-availability for the cluster by sending a copy
+of each page of date to two other nodes.  Patches welcome!
diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c
index 522cb8e..dcceed2 100644
--- a/drivers/staging/zcache/zcache-main.c
+++ b/drivers/staging/zcache/zcache-main.c
@@ -1922,15 +1922,15 @@
 
 #ifdef CONFIG_ZCACHE_MODULE
 #ifdef CONFIG_RAMSTER
-module_param(ramster_enabled, int, S_IRUGO);
+module_param(ramster_enabled, bool, S_IRUGO);
 module_param(disable_frontswap_selfshrink, int, S_IRUGO);
 #endif
-module_param(disable_cleancache, int, S_IRUGO);
-module_param(disable_frontswap, int, S_IRUGO);
+module_param(disable_cleancache, bool, S_IRUGO);
+module_param(disable_frontswap, bool, S_IRUGO);
 #ifdef FRONTSWAP_HAS_EXCLUSIVE_GETS
 module_param(frontswap_has_exclusive_gets, bool, S_IRUGO);
 #endif
-module_param(disable_frontswap_ignore_nonactive, int, S_IRUGO);
+module_param(disable_frontswap_ignore_nonactive, bool, S_IRUGO);
 module_param(zcache_comp_name, charp, S_IRUGO);
 module_init(zcache_init);
 MODULE_LICENSE("GPL");
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 6d0c27c..9bffcec 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -859,6 +859,7 @@
  */
 static void __exit ehv_bc_exit(void)
 {
+	platform_driver_unregister(&ehv_bc_tty_driver);
 	tty_unregister_driver(ehv_bc_driver);
 	put_tty_driver(ehv_bc_driver);
 	kfree(bcs);
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 71d6eb2..4c4a236 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1618,8 +1618,12 @@
 				if (ip->type == PORT_16550A)
 					me->fifo[p] = 1;
 
-				opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2);
-				opmode &= OP_MODE_MASK;
+				if (ip->board->chip_flag == MOXA_MUST_MU860_HWID) {
+					opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2);
+					opmode &= OP_MODE_MASK;
+				} else {
+					opmode = RS232_MODE;
+				}
 				me->iftype[p] = opmode;
 				mutex_unlock(&port->mutex);
 			}
@@ -1676,6 +1680,9 @@
 		int shiftbit;
 		unsigned char val, mask;
 
+		if (info->board->chip_flag != MOXA_MUST_MU860_HWID)
+			return -EFAULT;
+
 		p = tty->index % 4;
 		if (cmd == MOXA_SET_OP_MODE) {
 			if (get_user(opmode, (int __user *) argp))
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d655416..6c7fe90 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1573,6 +1573,14 @@
 			ldata->real_raw = 0;
 	}
 	n_tty_set_room(tty);
+	/*
+	 * Fix tty hang when I_IXON(tty) is cleared, but the tty
+	 * been stopped by STOP_CHAR(tty) before it.
+	 */
+	if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) {
+		start_tty(tty);
+	}
+
 	/* The termios change make the tty ready for I/O */
 	wake_up_interruptible(&tty->write_wait);
 	wake_up_interruptible(&tty->read_wait);
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 82d35c5..354564e 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -150,12 +150,14 @@
 	AIOP_INTR_BIT_3
 };
 
+#ifdef CONFIG_PCI
 static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = {
 	UPCI_AIOP_INTR_BIT_0,
 	UPCI_AIOP_INTR_BIT_1,
 	UPCI_AIOP_INTR_BIT_2,
 	UPCI_AIOP_INTR_BIT_3
 };
+#endif
 
 static Byte_t RData[RDATASIZE] = {
 	0x00, 0x09, 0xf6, 0x82,
@@ -227,7 +229,6 @@
 static int __init init_ISA(int i);
 static void rp_wait_until_sent(struct tty_struct *tty, int timeout);
 static void rp_flush_buffer(struct tty_struct *tty);
-static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model);
 static unsigned char GetLineNumber(int ctrl, int aiop, int ch);
 static unsigned char SetLineNumber(int ctrl, int aiop, int ch);
 static void rp_start(struct tty_struct *tty);
@@ -241,11 +242,6 @@
 static void sModemReset(CONTROLLER_T * CtlP, int chan, int on);
 static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on);
 static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data);
-static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
-			      ByteIO_t * AiopIOList, int AiopIOListSize,
-			      WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
-			      int PeriodicOnly, int altChanRingIndicator,
-			      int UPCIRingInd);
 static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
 			   ByteIO_t * AiopIOList, int AiopIOListSize,
 			   int IRQNum, Byte_t Frequency, int PeriodicOnly);
@@ -1775,6 +1771,145 @@
 };
 MODULE_DEVICE_TABLE(pci, rocket_pci_ids);
 
+/*  Resets the speaker controller on RocketModem II and III devices */
+static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
+{
+	ByteIO_t addr;
+
+	/* RocketModem II speaker control is at the 8th port location of offset 0x40 */
+	if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
+		addr = CtlP->AiopIO[0] + 0x4F;
+		sOutB(addr, 0);
+	}
+
+	/* RocketModem III speaker control is at the 1st port location of offset 0x80 */
+	if ((model == MODEL_UPCI_RM3_8PORT)
+	    || (model == MODEL_UPCI_RM3_4PORT)) {
+		addr = CtlP->AiopIO[0] + 0x88;
+		sOutB(addr, 0);
+	}
+}
+
+/***************************************************************************
+Function: sPCIInitController
+Purpose:  Initialization of controller global registers and controller
+          structure.
+Call:     sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
+                          IRQNum,Frequency,PeriodicOnly)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          int CtlNum; Controller number
+          ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
+             This list must be in the order the AIOPs will be found on the
+             controller.  Once an AIOP in the list is not found, it is
+             assumed that there are no more AIOPs on the controller.
+          int AiopIOListSize; Number of addresses in AiopIOList
+          int IRQNum; Interrupt Request number.  Can be any of the following:
+                         0: Disable global interrupts
+                         3: IRQ 3
+                         4: IRQ 4
+                         5: IRQ 5
+                         9: IRQ 9
+                         10: IRQ 10
+                         11: IRQ 11
+                         12: IRQ 12
+                         15: IRQ 15
+          Byte_t Frequency: A flag identifying the frequency
+                   of the periodic interrupt, can be any one of the following:
+                      FREQ_DIS - periodic interrupt disabled
+                      FREQ_137HZ - 137 Hertz
+                      FREQ_69HZ - 69 Hertz
+                      FREQ_34HZ - 34 Hertz
+                      FREQ_17HZ - 17 Hertz
+                      FREQ_9HZ - 9 Hertz
+                      FREQ_4HZ - 4 Hertz
+                   If IRQNum is set to 0 the Frequency parameter is
+                   overidden, it is forced to a value of FREQ_DIS.
+          int PeriodicOnly: 1 if all interrupts except the periodic
+                               interrupt are to be blocked.
+                            0 is both the periodic interrupt and
+                               other channel interrupts are allowed.
+                            If IRQNum is set to 0 the PeriodicOnly parameter is
+                               overidden, it is forced to a value of 0.
+Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
+               initialization failed.
+
+Comments:
+          If periodic interrupts are to be disabled but AIOP interrupts
+          are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
+
+          If interrupts are to be completely disabled set IRQNum to 0.
+
+          Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
+          invalid combination.
+
+          This function performs initialization of global interrupt modes,
+          but it does not actually enable global interrupts.  To enable
+          and disable global interrupts use functions sEnGlobalInt() and
+          sDisGlobalInt().  Enabling of global interrupts is normally not
+          done until all other initializations are complete.
+
+          Even if interrupts are globally enabled, they must also be
+          individually enabled for each channel that is to generate
+          interrupts.
+
+Warnings: No range checking on any of the parameters is done.
+
+          No context switches are allowed while executing this function.
+
+          After this function all AIOPs on the controller are disabled,
+          they can be enabled with sEnAiop().
+*/
+static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
+			      ByteIO_t * AiopIOList, int AiopIOListSize,
+			      WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
+			      int PeriodicOnly, int altChanRingIndicator,
+			      int UPCIRingInd)
+{
+	int i;
+	ByteIO_t io;
+
+	CtlP->AltChanRingIndicator = altChanRingIndicator;
+	CtlP->UPCIRingInd = UPCIRingInd;
+	CtlP->CtlNum = CtlNum;
+	CtlP->CtlID = CTLID_0001;	/* controller release 1 */
+	CtlP->BusType = isPCI;	/* controller release 1 */
+
+	if (ConfigIO) {
+		CtlP->isUPCI = 1;
+		CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
+		CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
+		CtlP->AiopIntrBits = upci_aiop_intr_bits;
+	} else {
+		CtlP->isUPCI = 0;
+		CtlP->PCIIO =
+		    (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
+		CtlP->AiopIntrBits = aiop_intr_bits;
+	}
+
+	sPCIControllerEOI(CtlP);	/* clear EOI if warm init */
+	/* Init AIOPs */
+	CtlP->NumAiop = 0;
+	for (i = 0; i < AiopIOListSize; i++) {
+		io = AiopIOList[i];
+		CtlP->AiopIO[i] = (WordIO_t) io;
+		CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
+
+		CtlP->AiopID[i] = sReadAiopID(io);	/* read AIOP ID */
+		if (CtlP->AiopID[i] == AIOPID_NULL)	/* if AIOP does not exist */
+			break;	/* done looking for AIOPs */
+
+		CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io);	/* num channels in AIOP */
+		sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE);	/* clock prescaler */
+		sOutB(io + _INDX_DATA, sClockPrescale);
+		CtlP->NumAiop++;	/* bump count of AIOPs */
+	}
+
+	if (CtlP->NumAiop == 0)
+		return (-1);
+	else
+		return (CtlP->NumAiop);
+}
+
 /*
  *  Called when a PCI card is found.  Retrieves and stores model information,
  *  init's aiopic and serial port hardware.
@@ -2519,147 +2654,6 @@
 		return (CtlP->NumAiop);
 }
 
-#ifdef CONFIG_PCI
-/***************************************************************************
-Function: sPCIInitController
-Purpose:  Initialization of controller global registers and controller
-          structure.
-Call:     sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
-                          IRQNum,Frequency,PeriodicOnly)
-          CONTROLLER_T *CtlP; Ptr to controller structure
-          int CtlNum; Controller number
-          ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
-             This list must be in the order the AIOPs will be found on the
-             controller.  Once an AIOP in the list is not found, it is
-             assumed that there are no more AIOPs on the controller.
-          int AiopIOListSize; Number of addresses in AiopIOList
-          int IRQNum; Interrupt Request number.  Can be any of the following:
-                         0: Disable global interrupts
-                         3: IRQ 3
-                         4: IRQ 4
-                         5: IRQ 5
-                         9: IRQ 9
-                         10: IRQ 10
-                         11: IRQ 11
-                         12: IRQ 12
-                         15: IRQ 15
-          Byte_t Frequency: A flag identifying the frequency
-                   of the periodic interrupt, can be any one of the following:
-                      FREQ_DIS - periodic interrupt disabled
-                      FREQ_137HZ - 137 Hertz
-                      FREQ_69HZ - 69 Hertz
-                      FREQ_34HZ - 34 Hertz
-                      FREQ_17HZ - 17 Hertz
-                      FREQ_9HZ - 9 Hertz
-                      FREQ_4HZ - 4 Hertz
-                   If IRQNum is set to 0 the Frequency parameter is
-                   overidden, it is forced to a value of FREQ_DIS.
-          int PeriodicOnly: 1 if all interrupts except the periodic
-                               interrupt are to be blocked.
-                            0 is both the periodic interrupt and
-                               other channel interrupts are allowed.
-                            If IRQNum is set to 0 the PeriodicOnly parameter is
-                               overidden, it is forced to a value of 0.
-Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
-               initialization failed.
-
-Comments:
-          If periodic interrupts are to be disabled but AIOP interrupts
-          are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
-
-          If interrupts are to be completely disabled set IRQNum to 0.
-
-          Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
-          invalid combination.
-
-          This function performs initialization of global interrupt modes,
-          but it does not actually enable global interrupts.  To enable
-          and disable global interrupts use functions sEnGlobalInt() and
-          sDisGlobalInt().  Enabling of global interrupts is normally not
-          done until all other initializations are complete.
-
-          Even if interrupts are globally enabled, they must also be
-          individually enabled for each channel that is to generate
-          interrupts.
-
-Warnings: No range checking on any of the parameters is done.
-
-          No context switches are allowed while executing this function.
-
-          After this function all AIOPs on the controller are disabled,
-          they can be enabled with sEnAiop().
-*/
-static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
-			      ByteIO_t * AiopIOList, int AiopIOListSize,
-			      WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
-			      int PeriodicOnly, int altChanRingIndicator,
-			      int UPCIRingInd)
-{
-	int i;
-	ByteIO_t io;
-
-	CtlP->AltChanRingIndicator = altChanRingIndicator;
-	CtlP->UPCIRingInd = UPCIRingInd;
-	CtlP->CtlNum = CtlNum;
-	CtlP->CtlID = CTLID_0001;	/* controller release 1 */
-	CtlP->BusType = isPCI;	/* controller release 1 */
-
-	if (ConfigIO) {
-		CtlP->isUPCI = 1;
-		CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
-		CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
-		CtlP->AiopIntrBits = upci_aiop_intr_bits;
-	} else {
-		CtlP->isUPCI = 0;
-		CtlP->PCIIO =
-		    (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
-		CtlP->AiopIntrBits = aiop_intr_bits;
-	}
-
-	sPCIControllerEOI(CtlP);	/* clear EOI if warm init */
-	/* Init AIOPs */
-	CtlP->NumAiop = 0;
-	for (i = 0; i < AiopIOListSize; i++) {
-		io = AiopIOList[i];
-		CtlP->AiopIO[i] = (WordIO_t) io;
-		CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
-
-		CtlP->AiopID[i] = sReadAiopID(io);	/* read AIOP ID */
-		if (CtlP->AiopID[i] == AIOPID_NULL)	/* if AIOP does not exist */
-			break;	/* done looking for AIOPs */
-
-		CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io);	/* num channels in AIOP */
-		sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE);	/* clock prescaler */
-		sOutB(io + _INDX_DATA, sClockPrescale);
-		CtlP->NumAiop++;	/* bump count of AIOPs */
-	}
-
-	if (CtlP->NumAiop == 0)
-		return (-1);
-	else
-		return (CtlP->NumAiop);
-}
-
-/*  Resets the speaker controller on RocketModem II and III devices */
-static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
-{
-	ByteIO_t addr;
-
-	/* RocketModem II speaker control is at the 8th port location of offset 0x40 */
-	if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
-		addr = CtlP->AiopIO[0] + 0x4F;
-		sOutB(addr, 0);
-	}
-
-	/* RocketModem III speaker control is at the 1st port location of offset 0x80 */
-	if ((model == MODEL_UPCI_RM3_8PORT)
-	    || (model == MODEL_UPCI_RM3_4PORT)) {
-		addr = CtlP->AiopIO[0] + 0x88;
-		sOutB(addr, 0);
-	}
-}
-#endif
-
 /***************************************************************************
 Function: sReadAiopID
 Purpose:  Read the AIOP idenfication number directly from an AIOP.
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index beaa283..d07b6af 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -338,7 +338,8 @@
 {
 	struct dw8250_data *data = dev_get_drvdata(dev);
 
-	clk_disable_unprepare(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_disable_unprepare(data->clk);
 
 	return 0;
 }
@@ -347,7 +348,8 @@
 {
 	struct dw8250_data *data = dev_get_drvdata(dev);
 
-	clk_prepare_enable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_prepare_enable(data->clk);
 
 	return 0;
 }
@@ -367,6 +369,7 @@
 static const struct acpi_device_id dw8250_acpi_match[] = {
 	{ "INT33C4", 0 },
 	{ "INT33C5", 0 },
+	{ "80860F0A", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 8ab70a6..e2774f9 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -332,7 +332,7 @@
 		dmaengine_slave_config(chan, &rx_conf);
 		uap->dmarx.chan = chan;
 
-		if (plat->dma_rx_poll_enable) {
+		if (plat && plat->dma_rx_poll_enable) {
 			/* Set poll rate if specified. */
 			if (plat->dma_rx_poll_rate) {
 				uap->dmarx.auto_poll_rate = false;
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index e956377..65be0c0 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -707,8 +707,10 @@
 	if (rc)
 		return rc;
 	rc = platform_driver_register(&mcf_platform_driver);
-	if (rc)
+	if (rc) {
+		uart_unregister_driver(&mcf_driver);
 		return rc;
+	}
 	return 0;
 }
 
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 018bad9..f51b280 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1497,18 +1497,23 @@
 	if (psc_ops && psc_ops->fifoc_init) {
 		ret = psc_ops->fifoc_init();
 		if (ret)
-			return ret;
+			goto err_init;
 	}
 
 	ret = platform_driver_register(&mpc52xx_uart_of_driver);
 	if (ret) {
 		printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
 		       __FILE__, ret);
-		uart_unregister_driver(&mpc52xx_uart_driver);
-		return ret;
+		goto err_reg;
 	}
 
 	return 0;
+err_reg:
+	if (psc_ops && psc_ops->fifoc_uninit)
+		psc_ops->fifoc_uninit();
+err_init:
+	uart_unregister_driver(&mpc52xx_uart_driver);
+	return ret;
 }
 
 static void __exit
diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c
index 77287c5..549c70a2 100644
--- a/drivers/tty/serial/nwpserial.c
+++ b/drivers/tty/serial/nwpserial.c
@@ -199,7 +199,7 @@
 	dcr_write(up->dcr_host, UART_IER, up->ier);
 
 	/* free irq */
-	free_irq(up->port.irq, port);
+	free_irq(up->port.irq, up);
 }
 
 static int nwpserial_verify_port(struct uart_port *port,
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 30d4f7a..f0b9f6b 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -202,26 +202,6 @@
 	return pdata->get_context_loss_count(up->dev);
 }
 
-static void serial_omap_set_forceidle(struct uart_omap_port *up)
-{
-	struct omap_uart_port_info *pdata = up->dev->platform_data;
-
-	if (!pdata || !pdata->set_forceidle)
-		return;
-
-	pdata->set_forceidle(up->dev);
-}
-
-static void serial_omap_set_noidle(struct uart_omap_port *up)
-{
-	struct omap_uart_port_info *pdata = up->dev->platform_data;
-
-	if (!pdata || !pdata->set_noidle)
-		return;
-
-	pdata->set_noidle(up->dev);
-}
-
 static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
 {
 	struct omap_uart_port_info *pdata = up->dev->platform_data;
@@ -298,8 +278,6 @@
 		serial_out(up, UART_IER, up->ier);
 	}
 
-	serial_omap_set_forceidle(up);
-
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
 }
@@ -364,7 +342,6 @@
 
 	pm_runtime_get_sync(up->dev);
 	serial_omap_enable_ier_thri(up);
-	serial_omap_set_noidle(up);
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
 }
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 074b919..8942941 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1803,6 +1803,7 @@
 
 static void __exit s3c24xx_serial_modexit(void)
 {
+	platform_driver_unregister(&samsung_serial_driver);
 	uart_unregister_driver(&s3c24xx_uart_drv);
 }
 
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index fbd447b..740202d 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -779,7 +779,6 @@
 		con_set_default_unimap(vc);
 	    vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
 	    if (!vc->vc_screenbuf) {
-		tty_port_destroy(&vc->port);
 		kfree(vc);
 		vc_cons[currcons].d = NULL;
 		return -ENOMEM;
@@ -986,26 +985,25 @@
 	return ret;
 }
 
-void vc_deallocate(unsigned int currcons)
+struct vc_data *vc_deallocate(unsigned int currcons)
 {
+	struct vc_data *vc = NULL;
+
 	WARN_CONSOLE_UNLOCKED();
 
 	if (vc_cons_allocated(currcons)) {
-		struct vc_data *vc = vc_cons[currcons].d;
-		struct vt_notifier_param param = { .vc = vc };
+		struct vt_notifier_param param;
 
+		param.vc = vc = vc_cons[currcons].d;
 		atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, &param);
 		vcs_remove_sysfs(currcons);
 		vc->vc_sw->con_deinit(vc);
 		put_pid(vc->vt_pid);
 		module_put(vc->vc_sw->owner);
 		kfree(vc->vc_screenbuf);
-		if (currcons >= MIN_NR_CONSOLES) {
-			tty_port_destroy(&vc->port);
-			kfree(vc);
-		}
 		vc_cons[currcons].d = NULL;
 	}
+	return vc;
 }
 
 /*
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 98ff173..fc2c06c 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -283,6 +283,51 @@
 	return 0;
 }
 
+/* deallocate a single console, if possible (leave 0) */
+static int vt_disallocate(unsigned int vc_num)
+{
+	struct vc_data *vc = NULL;
+	int ret = 0;
+
+	if (!vc_num)
+		return 0;
+
+	console_lock();
+	if (VT_BUSY(vc_num))
+		ret = -EBUSY;
+	else
+		vc = vc_deallocate(vc_num);
+	console_unlock();
+
+	if (vc && vc_num >= MIN_NR_CONSOLES) {
+		tty_port_destroy(&vc->port);
+		kfree(vc);
+	}
+
+	return ret;
+}
+
+/* deallocate all unused consoles, but leave 0 */
+static void vt_disallocate_all(void)
+{
+	struct vc_data *vc[MAX_NR_CONSOLES];
+	int i;
+
+	console_lock();
+	for (i = 1; i < MAX_NR_CONSOLES; i++)
+		if (!VT_BUSY(i))
+			vc[i] = vc_deallocate(i);
+		else
+			vc[i] = NULL;
+	console_unlock();
+
+	for (i = 1; i < MAX_NR_CONSOLES; i++) {
+		if (vc[i] && i >= MIN_NR_CONSOLES) {
+			tty_port_destroy(&vc[i]->port);
+			kfree(vc[i]);
+		}
+	}
+}
 
 
 /*
@@ -769,24 +814,10 @@
 			ret = -ENXIO;
 			break;
 		}
-		if (arg == 0) {
-		    /* deallocate all unused consoles, but leave 0 */
-			console_lock();
-			for (i=1; i<MAX_NR_CONSOLES; i++)
-				if (! VT_BUSY(i))
-					vc_deallocate(i);
-			console_unlock();
-		} else {
-			/* deallocate a single console, if possible */
-			arg--;
-			if (VT_BUSY(arg))
-				ret = -EBUSY;
-			else if (arg) {			      /* leave 0 */
-				console_lock();
-				vc_deallocate(arg);
-				console_unlock();
-			}
-		}
+		if (arg == 0)
+			vt_disallocate_all();
+		else
+			ret = vt_disallocate(--arg);
 		break;
 
 	case VT_RESIZE:
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index e92eeaf..5295be0 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -45,6 +45,7 @@
 
 config UIO_DMEM_GENIRQ
 	tristate "Userspace platform driver with generic irq and dynamic memory"
+	depends on HAS_DMA
 	help
 	  Platform driver for Userspace I/O devices, including generic
 	  interrupt handling code. Shared interrupts are not supported.
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index b7eb86a..8a7eb77 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -686,7 +686,8 @@
 {
 	int ret, len;
 	__le32 *buf;
-	int offb, offd;
+	int offb;
+	unsigned int offd;
 	const int stride = CMD_PACKET_SIZE / (4 * 2) - 1;
 	int buflen =  ((size - 1) / stride + 1 + size * 2) * 4;
 
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 608a2ae..b2df442 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -20,7 +20,7 @@
 config USB_CHIPIDEA_HOST
 	bool "ChipIdea host controller"
 	depends on USB=y || USB=USB_CHIPIDEA
-	depends on USB_EHCI_HCD
+	depends on USB_EHCI_HCD=y
 	select USB_EHCI_ROOT_HUB_TT
 	help
 	  Say Y here to enable host controller functionality of the
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 8faec9d..73f9d5f 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -173,17 +173,10 @@
 
 	ci13xxx_imx_platdata.phy = data->phy;
 
-	if (!pdev->dev.dma_mask) {
-		pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
-				      sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
-		if (!pdev->dev.dma_mask) {
-			ret = -ENOMEM;
-			dev_err(&pdev->dev, "Failed to alloc dma_mask!\n");
-			goto err;
-		}
-		*pdev->dev.dma_mask = DMA_BIT_MASK(32);
-		dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
-	}
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	if (usbmisc_ops && usbmisc_ops->init) {
 		ret = usbmisc_ops->init(&pdev->dev);
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 8772b36..db535b0 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -51,7 +51,7 @@
 
 config USB_OTG
 	bool "OTG support"
-	depends on USB_SUSPEND
+	depends on PM_RUNTIME
 	default n
 	help
 	  The most notable feature of USB OTG is support for a
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index ab5638d..a635988 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -88,6 +88,9 @@
 	/* Edirol SD-20 */
 	{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Alcor Micro Corp. Hub */
+	{ USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* appletouch */
 	{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index ea5ee9c..757aa18 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -19,21 +19,21 @@
 
 config USB_DWC3_HOST
 	bool "Host only mode"
-	depends on USB
+	depends on USB=y || USB=USB_DWC3
 	help
 	  Select this when you want to use DWC3 in host mode only,
 	  thereby the gadget feature will be regressed.
 
 config USB_DWC3_GADGET
 	bool "Gadget only mode"
-	depends on USB_GADGET
+	depends on USB_GADGET=y || USB_GADGET=USB_DWC3
 	help
 	  Select this when you want to use DWC3 in gadget mode only,
 	  thereby the host feature will be regressed.
 
 config USB_DWC3_DUAL_ROLE
 	bool "Dual Role mode"
-	depends on (USB && USB_GADGET)
+	depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
 	help
 	  This is the default mode of working of DWC3 controller where
 	  both host and gadget features are enabled.
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index a8afe6e..929e7dd 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -95,8 +95,6 @@
 	return 0;
 }
 
-static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32);
-
 static int dwc3_exynos_probe(struct platform_device *pdev)
 {
 	struct dwc3_exynos	*exynos;
@@ -118,7 +116,9 @@
 	 * Once we move to full device tree support this will vanish off.
 	 */
 	if (!dev->dma_mask)
-		dev->dma_mask = &dwc3_exynos_dma_mask;
+		dev->dma_mask = &dev->coherent_dma_mask;
+	if (!dev->coherent_dma_mask)
+		dev->coherent_dma_mask = DMA_BIT_MASK(32);
 
 	platform_set_drvdata(pdev, exynos);
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 83300d9..f41aa0d 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -146,7 +146,6 @@
 	depends on ARCH_LPC32XX
 	depends on USB_PHY
 	select USB_ISP1301
-	select USB_OTG_UTILS
 	help
 	   This option selects the USB device controller in the LPC32xx SoC.
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index f2a970f..5a5128a 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1992,8 +1992,6 @@
 err_get_hclk:
 	clk_put(pclk);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return ret;
 }
 
diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c
index 7922977..fd24cb4 100644
--- a/drivers/usb/gadget/bcm63xx_udc.c
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -2410,7 +2410,6 @@
 	usb_del_gadget_udc(&udc->gadget);
 	BUG_ON(udc->driver);
 
-	platform_set_drvdata(pdev, NULL);
 	bcm63xx_uninit_udc_hw(udc);
 
 	return 0;
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 3d5cfc9..80e7f75 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -821,8 +821,10 @@
 		gi->gstrings[i] = NULL;
 		s = usb_gstrings_attach(&gi->cdev, gi->gstrings,
 				USB_GADGET_FIRST_AVAIL_IDX);
-		if (IS_ERR(s))
+		if (IS_ERR(s)) {
+			ret = PTR_ERR(s);
 			goto err_comp_cleanup;
+		}
 
 		gi->cdev.desc.iManufacturer = s[USB_GADGET_MANUFACTURER_IDX].id;
 		gi->cdev.desc.iProduct = s[USB_GADGET_PRODUCT_IDX].id;
@@ -847,8 +849,10 @@
 			}
 			cfg->gstrings[i] = NULL;
 			s = usb_gstrings_attach(&gi->cdev, cfg->gstrings, 1);
-			if (IS_ERR(s))
+			if (IS_ERR(s)) {
+				ret = PTR_ERR(s);
 				goto err_comp_cleanup;
+			}
 			c->iConfiguration = s[0].id;
 		}
 
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index a792e32..c588e8e 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1001,7 +1001,6 @@
 	struct dummy	*dum = platform_get_drvdata(pdev);
 
 	usb_del_gadget_udc(&dum->gadget);
-	platform_set_drvdata(pdev, NULL);
 	device_remove_file(&dum->gadget.dev, &dev_attr_function);
 	return 0;
 }
@@ -2661,8 +2660,10 @@
 	}
 	for (i = 0; i < mod_data.num; i++) {
 		dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL);
-		if (!dum[i])
+		if (!dum[i]) {
+			retval = -ENOMEM;
 			goto err_add_pdata;
+		}
 		retval = platform_device_add_data(the_hcd_pdev[i], &dum[i],
 				sizeof(void *));
 		if (retval)
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index d893d69..abf8a31 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -816,6 +816,7 @@
  * @c: the configuration to support the network link
  * @ethaddr: a buffer in which the ethernet address of the host side
  *	side of the link was recorded
+ * @dev: eth_dev structure
  * Context: single threaded during gadget setup
  *
  * Returns zero on success, else negative errno.
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 185d6f5..7be04b3 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -373,6 +373,7 @@
  * @c: the configuration to support the network link
  * @ethaddr: a buffer in which the ethernet address of the host side
  *	side of the link was recorded
+ * @dev: eth_dev structure
  * Context: single threaded during gadget setup
  *
  * Returns zero on success, else negative errno.
diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c
index c7468b6..03c1fb6 100644
--- a/drivers/usb/gadget/f_uac2.c
+++ b/drivers/usb/gadget/f_uac2.c
@@ -456,8 +456,6 @@
 {
 	struct snd_card *card = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	if (card)
 		return snd_card_free(card);
 
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index cec8871..b8632d40 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -1461,8 +1461,10 @@
 
 	fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep,
 				GFP_KERNEL);
-	if (fusb300->ep0_req == NULL)
+	if (fusb300->ep0_req == NULL) {
+		ret = -ENOMEM;
 		goto clean_up3;
+	}
 
 	init_controller(fusb300);
 	ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget);
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index b5cebd6..9b2d24e 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1511,8 +1511,6 @@
 	if (pdata->exit)
 		pdata->exit(&pdev->dev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 866ef09..51cfe72 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1660,8 +1660,10 @@
 	m66592->epaddr2ep[0] = &m66592->ep[0];
 
 	m66592->ep0_req = m66592_alloc_request(&m66592->ep[0].ep, GFP_KERNEL);
-	if (m66592->ep0_req == NULL)
+	if (m66592->ep0_req == NULL) {
+		ret = -ENOMEM;
 		goto clean_up3;
+	}
 	m66592->ep0_req->complete = nop_completion;
 
 	init_controller(m66592);
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index ef47495..95c531d 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -2236,7 +2236,6 @@
 		dev->transceiver = NULL;
 	}
 
-	platform_set_drvdata(pdev, NULL);
 	the_controller = NULL;
 	return 0;
 }
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 0b742d1..7ff7d9c 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1977,8 +1977,10 @@
 
 	r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep,
 							GFP_KERNEL);
-	if (r8a66597->ep0_req == NULL)
+	if (r8a66597->ep0_req == NULL) {
+		ret = -ENOMEM;
 		goto clean_up3;
+	}
 	r8a66597->ep0_req->complete = nop_completion;
 
 	ret = usb_add_gadget_udc(&pdev->dev, &r8a66597->gadget);
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index a3cdc32..af22f24 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -437,7 +437,7 @@
 	if (hs_req->req.length == 0)
 		return;
 
-	usb_gadget_unmap_request(&hsotg->gadget, hs_req, hs_ep->dir_in);
+	usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in);
 }
 
 /**
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index d0e75e1..09c4f70 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1851,6 +1851,7 @@
 		irq = gpio_to_irq(udc_info->vbus_pin);
 		if (irq < 0) {
 			dev_err(dev, "no irq for gpio vbus pin\n");
+			retval = irq;
 			goto err_gpio_claim;
 		}
 
@@ -1948,8 +1949,6 @@
 	iounmap(base_addr);
 	release_mem_region(rsrc_start, rsrc_len);
 
-	platform_set_drvdata(pdev, NULL);
-
 	if (!IS_ERR(udc_clock) && udc_clock != NULL) {
 		clk_disable(udc_clock);
 		clk_put(udc_clock);
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 2cd6262..0deb9d6 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -284,12 +284,16 @@
 	ss_opts->bulk_buflen = gzero_options.bulk_buflen;
 
 	func_ss = usb_get_function(func_inst_ss);
-	if (IS_ERR(func_ss))
+	if (IS_ERR(func_ss)) {
+		status = PTR_ERR(func_ss);
 		goto err_put_func_inst_ss;
+	}
 
 	func_inst_lb = usb_get_function_instance("Loopback");
-	if (IS_ERR(func_inst_lb))
+	if (IS_ERR(func_inst_lb)) {
+		status = PTR_ERR(func_inst_lb);
 		goto err_put_func_ss;
+	}
 
 	lb_opts = container_of(func_inst_lb, struct f_lb_opts, func_inst);
 	lb_opts->bulk_buflen = gzero_options.bulk_buflen;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index de94f26..344d5e2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -507,7 +507,7 @@
 
 config USB_UHCI_HCD
 	tristate "UHCI HCD (most Intel and VIA) support"
-	depends on PCI || SPARC_LEON || ARCH_VT8500
+	depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
 	---help---
 	  The Universal Host Controller Interface is a standard by Intel for
 	  accessing the USB hardware in the PC (which is also called the USB
@@ -524,26 +524,19 @@
 
 config USB_UHCI_SUPPORT_NON_PCI_HC
 	bool
-	depends on USB_UHCI_HCD
-	default y if (SPARC_LEON || ARCH_VT8500)
+	default y if (SPARC_LEON || USB_UHCI_PLATFORM)
 
 config USB_UHCI_PLATFORM
-	bool "Generic UHCI Platform Driver support"
-	depends on USB_UHCI_SUPPORT_NON_PCI_HC
+	bool
 	default y if ARCH_VT8500
-	---help---
-	  Enable support for generic UHCI platform devices that require no
-	  additional configuration.
 
 config USB_UHCI_BIG_ENDIAN_MMIO
 	bool
-	depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
-	default y
+	default y if SPARC_LEON
 
 config USB_UHCI_BIG_ENDIAN_DESC
 	bool
-	depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
-	default y
+	default y if SPARC_LEON
 
 config USB_FHCI_HCD
 	tristate "Freescale QE USB Host Controller support"
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 6642009..02f4611 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -63,8 +63,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
-
 static int ehci_atmel_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
@@ -93,7 +91,9 @@
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &at91_ehci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 	if (!hcd) {
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 312fc10..246e124 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1286,23 +1286,6 @@
 #define	PLATFORM_DRIVER		ehci_hcd_sead3_driver
 #endif
 
-#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
-	!IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_HCD_SPEAR) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_S5P) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_HCD_AT91) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_MSM) && \
-	!defined(PLATFORM_DRIVER) && \
-	!defined(PS3_SYSTEM_BUS_DRIVER) && \
-	!defined(OF_PLATFORM_DRIVER) && \
-	!defined(XILINX_OF_PLATFORM_DRIVER)
-#error "missing bus glue for ehci-hcd"
-#endif
-
 static int __init ehci_hcd_init(void)
 {
 	int retval = 0;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 3d1491b..16d7150 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -90,8 +90,6 @@
 	.extra_priv_size = sizeof(struct omap_hcd),
 };
 
-static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32);
-
 /**
  * ehci_hcd_omap_probe - initialize TI-based HCDs
  *
@@ -146,8 +144,10 @@
 	 * Since shared usb code relies on it, set it here for now.
 	 * Once we have dma capability bindings this can go away.
 	 */
-	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &omap_ehci_dma_mask;
+	if (!dev->dma_mask)
+		dev->dma_mask = &dev->coherent_dma_mask;
+	if (!dev->coherent_dma_mask)
+		dev->coherent_dma_mask = DMA_BIT_MASK(32);
 
 	hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
 			dev_name(dev));
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 54c5794..efbc588 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -137,8 +137,6 @@
 	}
 }
 
-static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32);
-
 static int ehci_orion_drv_probe(struct platform_device *pdev)
 {
 	struct orion_ehci_data *pd = pdev->dev.platform_data;
@@ -183,7 +181,9 @@
 	 * now. Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &ehci_orion_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	if (!request_mem_region(res->start, resource_size(res),
 				ehci_orion_hc_driver.description)) {
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 6357752..379037f 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -71,8 +71,6 @@
 		dev_err(dev, "can't request ehci vbus gpio %d", gpio);
 }
 
-static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
-
 static int s5p_ehci_probe(struct platform_device *pdev)
 {
 	struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
@@ -90,7 +88,7 @@
 	 * Once we move to full device tree support this will vanish off.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &ehci_s5p_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
 	if (!pdev->dev.coherent_dma_mask)
 		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
@@ -107,6 +105,7 @@
 	if (IS_ERR(phy)) {
 		/* Fallback to pdata */
 		if (!pdata) {
+			usb_put_hcd(hcd);
 			dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
 			return -EPROBE_DEFER;
 		} else {
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index 61ecfb3..bd3e5cb 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -58,8 +58,6 @@
 static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend,
 		ehci_spear_drv_resume);
 
-static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32);
-
 static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd ;
@@ -84,7 +82,9 @@
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &spear_ehci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	usbh_clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(usbh_clk)) {
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index e3eddc3..59d111b 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -637,8 +637,6 @@
 	writel(val, base + TEGRA_USB_PORTSC1);
 }
 
-static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
-
 static int tegra_ehci_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -661,7 +659,9 @@
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &tegra_ehci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	setup_vbus_gpio(pdev, pdata);
 
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 125e261..2facee5 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1739,7 +1739,7 @@
 	int retval = 1;
 	unsigned long flags;
 
-	/* if !USB_SUSPEND, root hub timers won't get shut down ... */
+	/* if !PM_RUNTIME, root hub timers won't get shut down ... */
 	if (!HC_IS_RUNNING(hcd->state))
 		return 0;
 
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index bbb791b..a13709e 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -373,8 +373,10 @@
 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!irq_res) {
 		pr_warning("isp1760: IRQ resource not available\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto cleanup;
 	}
+
 	irqflags |= irq_res->flags & IRQF_TRIGGER_MASK;
 
 	if (priv) {
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index a0cb44f..2ee1496 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -504,8 +504,6 @@
 
 MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
 
-static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
-
 static int ohci_at91_of_init(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -522,7 +520,9 @@
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &at91_ohci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 07592c0..b0b542c 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -98,8 +98,6 @@
 	.start_port_reset	= ohci_start_port_reset,
 };
 
-static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32);
-
 static int exynos_ohci_probe(struct platform_device *pdev)
 {
 	struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
@@ -117,7 +115,7 @@
 	 * Once we move to full device tree support this will vanish off.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &ohci_exynos_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
 	if (!pdev->dev.coherent_dma_mask)
 		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 9e6de95..fc627fd 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -233,14 +233,14 @@
 			urb->start_frame = frame;
 		}
 	} else if (ed->type == PIPE_ISOCHRONOUS) {
-		u16	next = ohci_frame_no(ohci) + 2;
+		u16	next = ohci_frame_no(ohci) + 1;
 		u16	frame = ed->last_iso + ed->interval;
 
 		/* Behind the scheduling threshold? */
 		if (unlikely(tick_before(frame, next))) {
 
 			/* USB_ISO_ASAP: Round up to the first available slot */
-			if (urb->transfer_flags & URB_ISO_ASAP)
+			if (urb->transfer_flags & URB_ISO_ASAP) {
 				frame += (next - frame + ed->interval - 1) &
 						-ed->interval;
 
@@ -248,21 +248,25 @@
 			 * Not ASAP: Use the next slot in the stream.  If
 			 * the entire URB falls before the threshold, fail.
 			 */
-			else if (tick_before(frame + ed->interval *
+			} else {
+				if (tick_before(frame + ed->interval *
 					(urb->number_of_packets - 1), next)) {
-				retval = -EXDEV;
-				usb_hcd_unlink_urb_from_ep(hcd, urb);
-				goto fail;
-			}
+					retval = -EXDEV;
+					usb_hcd_unlink_urb_from_ep(hcd, urb);
+					goto fail;
+				}
 
-			/*
-			 * Some OHCI hardware doesn't handle late TDs
-			 * correctly.  After retiring them it proceeds to
-			 * the next ED instead of the next TD.  Therefore
-			 * we have to omit the late TDs entirely.
-			 */
-			urb_priv->td_cnt = DIV_ROUND_UP(next - frame,
-					ed->interval);
+				/*
+				 * Some OHCI hardware doesn't handle late TDs
+				 * correctly.  After retiring them it proceeds
+				 * to the next ED instead of the next TD.
+				 * Therefore we have to omit the late TDs
+				 * entirely.
+				 */
+				urb_priv->td_cnt = DIV_ROUND_UP(
+						(u16) (next - frame),
+						ed->interval);
+			}
 		}
 		urb->start_frame = frame;
 	}
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index f303cb0..5d7eb72 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -223,8 +223,7 @@
 
 	isp1301_i2c_client = isp1301_get_client(isp1301_node);
 	if (!isp1301_i2c_client) {
-		ret = -EPROBE_DEFER;
-		goto out;
+		return -EPROBE_DEFER;
 	}
 
 	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
@@ -234,7 +233,7 @@
 	if (usb_disabled()) {
 		dev_err(&pdev->dev, "USB is disabled\n");
 		ret = -ENODEV;
-		goto out;
+		goto fail_disable;
 	}
 
 	/* Enable AHB slave USB clock, needed for further USB clock control */
@@ -245,19 +244,19 @@
 	if (IS_ERR(usb_pll_clk)) {
 		dev_err(&pdev->dev, "failed to acquire USB PLL\n");
 		ret = PTR_ERR(usb_pll_clk);
-		goto out1;
+		goto fail_pll;
 	}
 
 	ret = clk_enable(usb_pll_clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to start USB PLL\n");
-		goto out2;
+		goto fail_pllen;
 	}
 
 	ret = clk_set_rate(usb_pll_clk, 48000);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to set USB clock rate\n");
-		goto out3;
+		goto fail_rate;
 	}
 
 	/* Enable USB device clock */
@@ -265,13 +264,13 @@
 	if (IS_ERR(usb_dev_clk)) {
 		dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
 		ret = PTR_ERR(usb_dev_clk);
-		goto out4;
+		goto fail_dev;
 	}
 
 	ret = clk_enable(usb_dev_clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
-		goto out5;
+		goto fail_deven;
 	}
 
 	/* Enable USB otg clocks */
@@ -279,7 +278,7 @@
 	if (IS_ERR(usb_otg_clk)) {
 		dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
 		ret = PTR_ERR(usb_otg_clk);
-		goto out6;
+		goto fail_otg;
 	}
 
 	__raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
@@ -287,7 +286,7 @@
 	ret = clk_enable(usb_otg_clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
-		goto out7;
+		goto fail_otgen;
 	}
 
 	isp1301_configure();
@@ -296,14 +295,14 @@
 	if (!hcd) {
 		dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
 		ret = -ENOMEM;
-		goto out8;
+		goto fail_hcd;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(hcd->regs)) {
 		ret = PTR_ERR(hcd->regs);
-		goto out8;
+		goto fail_resource;
 	}
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
@@ -311,7 +310,7 @@
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		ret = -ENXIO;
-		goto out8;
+		goto fail_resource;
 	}
 
 	nxp_start_hc();
@@ -325,23 +324,24 @@
 		return ret;
 
 	nxp_stop_hc();
-out8:
+fail_resource:
 	usb_put_hcd(hcd);
-out7:
+fail_hcd:
 	clk_disable(usb_otg_clk);
-out6:
+fail_otgen:
 	clk_put(usb_otg_clk);
-out5:
+fail_otg:
 	clk_disable(usb_dev_clk);
-out4:
+fail_deven:
 	clk_put(usb_dev_clk);
-out3:
+fail_dev:
+fail_rate:
 	clk_disable(usb_pll_clk);
-out2:
+fail_pllen:
 	clk_put(usb_pll_clk);
-out1:
+fail_pll:
+fail_disable:
 	isp1301_i2c_client = NULL;
-out:
 	return ret;
 }
 
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index ddfc314..8663851 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -114,8 +114,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32);
-
 /*
  * configure so an HC device and id are always provided
  * always called with process context; sleeping is OK
@@ -168,8 +166,10 @@
 	 * Since shared usb code relies on it, set it here for now.
 	 * Once we have dma capability bindings this can go away.
 	 */
-	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &omap_ohci_dma_mask;
+	if (!dev->dma_mask)
+		dev->dma_mask = &dev->coherent_dma_mask;
+	if (!dev->coherent_dma_mask)
+		dev->coherent_dma_mask = DMA_BIT_MASK(32);
 
 	hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
 			dev_name(dev));
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index efe71f3..279b2ef 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -282,8 +282,6 @@
 
 MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids);
 
-static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32);
-
 static int ohci_pxa_of_init(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -298,7 +296,9 @@
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &pxa_ohci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 9020bf0..3e19e01 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -91,8 +91,6 @@
 	.start_port_reset	= ohci_start_port_reset,
 };
 
-static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32);
-
 static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
 {
 	const struct hc_driver *driver = &ohci_spear_hc_driver;
@@ -114,7 +112,9 @@
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &spear_ohci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	usbh_clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(usbh_clk)) {
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 4f0f033..0f401db 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3084,7 +3084,7 @@
 	int ports, i, retval = 1;
 	unsigned long flags;
 
-	/* if !USB_SUSPEND, root hub timers won't get shut down ... */
+	/* if !PM_RUNTIME, root hub timers won't get shut down ... */
 	if (!HC_IS_RUNNING(hcd->state))
 		return 0;
 
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index ad4483e..b2ec7fe 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -22,7 +22,7 @@
  * and usb-storage.
  *
  * TODO:
- * - usb suspend/resume triggered by sl811 (with USB_SUSPEND)
+ * - usb suspend/resume triggered by sl811 (with PM_RUNTIME)
  * - various issues noted in the code
  * - performance work; use both register banks; ...
  * - use urb->iso_frame_desc[] with ISO transfers
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index f87bee6..9189bc9 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -225,7 +225,8 @@
 		/* auto-stop if nothing connected for 1 second */
 		if (any_ports_active(uhci))
 			uhci->rh_state = UHCI_RH_RUNNING;
-		else if (time_after_eq(jiffies, uhci->auto_stop_time))
+		else if (time_after_eq(jiffies, uhci->auto_stop_time) &&
+				!uhci->wait_for_hp)
 			suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
 		break;
 
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 8c4dace..f1db61a 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -60,8 +60,6 @@
 	.hub_control =		uhci_hub_control,
 };
 
-static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
-
 static int uhci_hcd_platform_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
@@ -78,7 +76,9 @@
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &platform_uhci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
 			pdev->name);
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index f0976d8..041c6dd 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -1287,7 +1287,7 @@
 		return -EINVAL;		/* Can't change the period */
 
 	} else {
-		next = uhci->frame_number + 2;
+		next = uhci->frame_number + 1;
 
 		/* Find the next unused frame */
 		if (list_empty(&qh->queue)) {
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 965b539..2cfc465 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1423,15 +1423,17 @@
 	ep_ctx->ep_info2 |= cpu_to_le32(xhci_get_endpoint_type(udev, ep));
 
 	/* Set the max packet size and max burst */
+	max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
+	max_burst = 0;
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		max_packet = usb_endpoint_maxp(&ep->desc);
-		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		/* dig out max burst from ep companion desc */
-		max_packet = ep->ss_ep_comp.bMaxBurst;
-		ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet));
+		max_burst = ep->ss_ep_comp.bMaxBurst;
 		break;
 	case USB_SPEED_HIGH:
+		/* Some devices get this wrong */
+		if (usb_endpoint_xfer_bulk(&ep->desc))
+			max_packet = 512;
 		/* bits 11:12 specify the number of additional transaction
 		 * opportunities per microframe (USB 2.0, section 9.6.6)
 		 */
@@ -1439,17 +1441,16 @@
 				usb_endpoint_xfer_int(&ep->desc)) {
 			max_burst = (usb_endpoint_maxp(&ep->desc)
 				     & 0x1800) >> 11;
-			ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst));
 		}
-		/* Fall through */
+		break;
 	case USB_SPEED_FULL:
 	case USB_SPEED_LOW:
-		max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
-		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		break;
 	default:
 		BUG();
 	}
+	ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) |
+			MAX_BURST(max_burst));
 	max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
 	ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload));
 
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 3a18e44..e1b661d 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -560,6 +560,7 @@
 		if (!config) {
 			dev_err(&pdev->dev,
 				"failed to allocate musb hdrc config\n");
+			ret = -ENOMEM;
 			goto err2;
 		}
 
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 3551f1a..628b93f 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -549,7 +549,8 @@
 		glue->control_otghs = omap_get_control_dev();
 		if (IS_ERR(glue->control_otghs)) {
 			dev_vdbg(&pdev->dev, "Failed to get control device\n");
-			return -ENODEV;
+			ret = PTR_ERR(glue->control_otghs);
+			goto err2;
 		}
 	} else {
 		glue->control_otghs = ERR_PTR(-ENODEV);
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 371d0e7..7ef3eb8 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -25,7 +25,7 @@
 
 config FSL_USB2_OTG
 	bool "Freescale USB OTG Transceiver Driver"
-	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
+	depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME
 	select USB_OTG
 	help
 	  Enable this to support Freescale USB OTG transceiver.
@@ -139,7 +139,6 @@
 	tristate "NXP ISP1301 USB transceiver support"
 	depends on USB || USB_GADGET
 	depends on I2C
-	select USB_OTG_UTILS
 	help
 	  Say Y here to add support for the NXP ISP1301 USB transceiver driver.
 	  This chip is typically used as USB transceiver for USB host, gadget
@@ -162,7 +161,7 @@
 
 config USB_MV_OTG
 	tristate "Marvell USB OTG support"
-	depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
+	depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME
 	select USB_OTG
 	help
 	  Say Y here if you want to build Marvell USB OTG transciever
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 4acef26..e5eb1b5 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -892,8 +892,6 @@
 	else if (ab->mode == USB_PERIPHERAL)
 		ab8500_usb_peri_phy_dis(ab);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index 97b9308..e771baf 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -799,6 +799,7 @@
 
 	/* initialize the otg structure */
 	fsl_otg_tc->phy.label = DRIVER_DESC;
+	fsl_otg_tc->phy.dev = &pdev->dev;
 	fsl_otg_tc->phy.set_power = fsl_otg_set_power;
 
 	fsl_otg_tc->phy.otg->phy = &fsl_otg_tc->phy;
diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c
index 4c76074..8443335 100644
--- a/drivers/usb/phy/phy-gpio-vbus-usb.c
+++ b/drivers/usb/phy/phy-gpio-vbus-usb.c
@@ -266,6 +266,7 @@
 	platform_set_drvdata(pdev, gpio_vbus);
 	gpio_vbus->dev = &pdev->dev;
 	gpio_vbus->phy.label = "gpio-vbus";
+	gpio_vbus->phy.dev = gpio_vbus->dev;
 	gpio_vbus->phy.set_power = gpio_vbus_set_power;
 	gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend;
 	gpio_vbus->phy.state = OTG_STATE_UNDEFINED;
@@ -343,7 +344,6 @@
 		gpio_free(pdata->gpio_pullup);
 	gpio_free(pdata->gpio_vbus);
 err_gpio:
-	platform_set_drvdata(pdev, NULL);
 	kfree(gpio_vbus->phy.otg);
 	kfree(gpio_vbus);
 	return err;
@@ -365,7 +365,6 @@
 	if (gpio_is_valid(pdata->gpio_pullup))
 		gpio_free(pdata->gpio_pullup);
 	gpio_free(gpio);
-	platform_set_drvdata(pdev, NULL);
 	kfree(gpio_vbus->phy.otg);
 	kfree(gpio_vbus);
 
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index 225ae6c..8a55b37 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -102,6 +102,7 @@
 	mutex_init(&isp->mutex);
 
 	phy = &isp->phy;
+	phy->dev = &client->dev;
 	phy->label = DRV_NAME;
 	phy->init = isp1301_phy_init;
 	phy->set_vbus = isp1301_phy_set_vbus;
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index c987bbe..4a6b03c 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -667,7 +667,6 @@
 	mv_otg_disable(mvotg);
 
 	usb_remove_phy(&mvotg->phy);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
@@ -850,8 +849,6 @@
 	flush_workqueue(mvotg->qwork);
 	destroy_workqueue(mvotg->qwork);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return retval;
 }
 
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index eb25dd2..bd601c5 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -155,6 +155,7 @@
 	mxs_phy->phy.set_suspend	= mxs_phy_suspend;
 	mxs_phy->phy.notify_connect	= mxs_phy_on_connect;
 	mxs_phy->phy.notify_disconnect	= mxs_phy_on_disconnect;
+	mxs_phy->phy.type		= USB_PHY_TYPE_USB2;
 
 	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
 
@@ -175,8 +176,6 @@
 
 	usb_remove_phy(&mxs_phy->phy);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/usb/phy/phy-nop.c b/drivers/usb/phy/phy-nop.c
index 2b10cc9..638cc5d 100644
--- a/drivers/usb/phy/phy-nop.c
+++ b/drivers/usb/phy/phy-nop.c
@@ -254,8 +254,6 @@
 
 	usb_remove_phy(&nop->phy);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 242b577..7260ec6 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -189,6 +189,8 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) },
 	{ USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) },
+	{ USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_CC_PID) },
+	{ USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_AGP_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
@@ -924,8 +926,8 @@
 static int  ftdi_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg);
 static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
-static int ftdi_chars_in_buffer(struct tty_struct *tty);
-static int ftdi_get_modem_status(struct tty_struct *tty,
+static bool ftdi_tx_empty(struct usb_serial_port *port);
+static int ftdi_get_modem_status(struct usb_serial_port *port,
 						unsigned char status[2]);
 
 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
@@ -961,7 +963,7 @@
 	.ioctl =		ftdi_ioctl,
 	.set_termios =		ftdi_set_termios,
 	.break_ctl =		ftdi_break_ctl,
-	.chars_in_buffer =      ftdi_chars_in_buffer,
+	.tx_empty =		ftdi_tx_empty,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
@@ -2056,27 +2058,18 @@
 
 }
 
-static int ftdi_chars_in_buffer(struct tty_struct *tty)
+static bool ftdi_tx_empty(struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = tty->driver_data;
-	int chars;
 	unsigned char buf[2];
 	int ret;
 
-	chars = usb_serial_generic_chars_in_buffer(tty);
-	if (chars)
-		goto out;
-
-	/* Check if hardware buffer is empty. */
-	ret = ftdi_get_modem_status(tty, buf);
+	ret = ftdi_get_modem_status(port, buf);
 	if (ret == 2) {
 		if (!(buf[1] & FTDI_RS_TEMT))
-			chars = 1;
+			return false;
 	}
-out:
-	dev_dbg(&port->dev, "%s - %d\n", __func__, chars);
 
-	return chars;
+	return true;
 }
 
 /* old_termios contains the original termios settings and tty->termios contains
@@ -2268,10 +2261,9 @@
  * Returns the number of status bytes retrieved (device dependant), or
  * negative error code.
  */
-static int ftdi_get_modem_status(struct tty_struct *tty,
+static int ftdi_get_modem_status(struct usb_serial_port *port,
 						unsigned char status[2])
 {
-	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	unsigned char *buf;
 	int len;
@@ -2336,7 +2328,7 @@
 	unsigned char buf[2];
 	int ret;
 
-	ret = ftdi_get_modem_status(tty, buf);
+	ret = ftdi_get_modem_status(port, buf);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 9852827..6dd7925 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -772,6 +772,8 @@
  */
 #define NEWPORT_VID			0x104D
 #define NEWPORT_AGILIS_PID		0x3000
+#define NEWPORT_CONEX_CC_PID		0x3002
+#define NEWPORT_CONEX_AGP_PID		0x3006
 
 /* Interbiometrics USB I/O Board */
 /* Developed for Interbiometrics by Rudolf Gugler */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 297665f..ba45170 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -253,6 +253,37 @@
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer);
 
+void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int bps;
+	unsigned long period;
+	unsigned long expire;
+
+	bps = tty_get_baud_rate(tty);
+	if (!bps)
+		bps = 9600;	/* B0 */
+	/*
+	 * Use a poll-period of roughly the time it takes to send one
+	 * character or at least one jiffy.
+	 */
+	period = max_t(unsigned long, (10 * HZ / bps), 1);
+	period = min_t(unsigned long, period, timeout);
+
+	dev_dbg(&port->dev, "%s - timeout = %u ms, period = %u ms\n",
+					__func__, jiffies_to_msecs(timeout),
+					jiffies_to_msecs(period));
+	expire = jiffies + timeout;
+	while (!port->serial->type->tx_empty(port)) {
+		schedule_timeout_interruptible(period);
+		if (signal_pending(current))
+			break;
+		if (time_after(jiffies, expire))
+			break;
+	}
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_wait_until_sent);
+
 static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
 						int index, gfp_t mem_flags)
 {
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 158bf4b..1be6ba7 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2019,8 +2019,6 @@
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
-	int ret;
-
 	if (edge_port == NULL)
 		return 0;
 
@@ -2028,16 +2026,22 @@
 	chars = kfifo_len(&edge_port->write_fifo);
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 
-	if (!chars) {
-		ret = tx_active(edge_port);
-		if (ret > 0)
-			chars = ret;
-	}
-
 	dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
 	return chars;
 }
 
+static bool edge_tx_empty(struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	int ret;
+
+	ret = tx_active(edge_port);
+	if (ret > 0)
+		return false;
+
+	return true;
+}
+
 static void edge_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -2557,6 +2561,7 @@
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,
+	.tx_empty		= edge_tx_empty,
 	.break_ctl		= edge_break,
 	.read_int_callback	= edge_interrupt_callback,
 	.read_bulk_callback	= edge_bulk_in_callback,
@@ -2589,6 +2594,7 @@
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,
+	.tx_empty		= edge_tx_empty,
 	.break_ctl		= edge_break,
 	.read_int_callback	= edge_interrupt_callback,
 	.read_bulk_callback	= edge_bulk_in_callback,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 7343728..93d02bc 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -196,6 +196,7 @@
 
 #define DELL_PRODUCT_5800_MINICARD_VZW		0x8195  /* Novatel E362 */
 #define DELL_PRODUCT_5800_V2_MINICARD_VZW	0x8196  /* Novatel E362 */
+#define DELL_PRODUCT_5804_MINICARD_ATT		0x819b  /* Novatel E371 */
 
 #define KYOCERA_VENDOR_ID			0x0c88
 #define KYOCERA_PRODUCT_KPC650			0x17da
@@ -341,8 +342,8 @@
 #define CINTERION_PRODUCT_EU3_E			0x0051
 #define CINTERION_PRODUCT_EU3_P			0x0052
 #define CINTERION_PRODUCT_PH8			0x0053
-#define CINTERION_PRODUCT_AH6			0x0055
-#define CINTERION_PRODUCT_PLS8			0x0060
+#define CINTERION_PRODUCT_AHXX			0x0055
+#define CINTERION_PRODUCT_PLXX			0x0060
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -771,6 +772,7 @@
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, 	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
 	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },	/* ADU-E100, ADU-310 */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -966,6 +968,8 @@
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
@@ -1264,8 +1268,9 @@
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
-	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) },
-	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, 
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index cac47ae..c92c5ed 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -101,6 +101,7 @@
 		const unsigned char *data, int count);
 static int ti_write_room(struct tty_struct *tty);
 static int ti_chars_in_buffer(struct tty_struct *tty);
+static bool ti_tx_empty(struct usb_serial_port *port);
 static void ti_throttle(struct tty_struct *tty);
 static void ti_unthrottle(struct tty_struct *tty);
 static int ti_ioctl(struct tty_struct *tty,
@@ -222,6 +223,7 @@
 	.write			= ti_write,
 	.write_room		= ti_write_room,
 	.chars_in_buffer	= ti_chars_in_buffer,
+	.tx_empty		= ti_tx_empty,
 	.throttle		= ti_throttle,
 	.unthrottle		= ti_unthrottle,
 	.ioctl			= ti_ioctl,
@@ -253,6 +255,7 @@
 	.write			= ti_write,
 	.write_room		= ti_write_room,
 	.chars_in_buffer	= ti_chars_in_buffer,
+	.tx_empty		= ti_tx_empty,
 	.throttle		= ti_throttle,
 	.unthrottle		= ti_unthrottle,
 	.ioctl			= ti_ioctl,
@@ -684,8 +687,6 @@
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
-	int ret;
-	u8 lsr;
 
 	if (tport == NULL)
 		return 0;
@@ -694,16 +695,22 @@
 	chars = kfifo_len(&tport->write_fifo);
 	spin_unlock_irqrestore(&tport->tp_lock, flags);
 
-	if (!chars) {
-		ret = ti_get_lsr(tport, &lsr);
-		if (!ret && !(lsr & TI_LSR_TX_EMPTY))
-			chars = 1;
-	}
-
 	dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
 	return chars;
 }
 
+static bool ti_tx_empty(struct usb_serial_port *port)
+{
+	struct ti_port *tport = usb_get_serial_port_data(port);
+	int ret;
+	u8 lsr;
+
+	ret = ti_get_lsr(tport, &lsr);
+	if (!ret && !(lsr & TI_LSR_TX_EMPTY))
+		return false;
+
+	return true;
+}
 
 static void ti_throttle(struct tty_struct *tty)
 {
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index cf75beb..4753c00 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -359,20 +359,29 @@
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
-	int count = 0;
 
 	dev_dbg(tty->dev, "%s\n", __func__);
 
-	mutex_lock(&serial->disc_mutex);
-	/* if the device was unplugged then any remaining characters
-	   fell out of the connector ;) */
 	if (serial->disconnected)
-		count = 0;
-	else
-		count = serial->type->chars_in_buffer(tty);
-	mutex_unlock(&serial->disc_mutex);
+		return 0;
 
-	return count;
+	return serial->type->chars_in_buffer(tty);
+}
+
+static void serial_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+
+	dev_dbg(tty->dev, "%s\n", __func__);
+
+	if (!port->serial->type->wait_until_sent)
+		return;
+
+	mutex_lock(&serial->disc_mutex);
+	if (!serial->disconnected)
+		port->serial->type->wait_until_sent(tty, timeout);
+	mutex_unlock(&serial->disc_mutex);
 }
 
 static void serial_throttle(struct tty_struct *tty)
@@ -1191,6 +1200,7 @@
 	.unthrottle =		serial_unthrottle,
 	.break_ctl =		serial_break,
 	.chars_in_buffer =	serial_chars_in_buffer,
+	.wait_until_sent =	serial_wait_until_sent,
 	.tiocmget =		serial_tiocmget,
 	.tiocmset =		serial_tiocmset,
 	.get_icount =		serial_get_icount,
@@ -1316,6 +1326,8 @@
 	set_to_generic_if_null(device, close);
 	set_to_generic_if_null(device, write_room);
 	set_to_generic_if_null(device, chars_in_buffer);
+	if (device->tx_empty)
+		set_to_generic_if_null(device, wait_until_sent);
 	set_to_generic_if_null(device, read_bulk_callback);
 	set_to_generic_if_null(device, write_bulk_callback);
 	set_to_generic_if_null(device, process_read_urb);
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 8623577..281be56 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -105,8 +105,9 @@
 	int status_len;
 
 	u32 flag;
-#ifdef CONFIG_REALTEK_AUTOPM
 	struct us_data *us;
+
+#ifdef CONFIG_REALTEK_AUTOPM
 	struct timer_list rts51x_suspend_timer;
 	unsigned long timer_expires;
 	int pwr_state;
@@ -988,6 +989,7 @@
 	us->extra = chip;
 	us->extra_destructor = realtek_cr_destructor;
 	us->max_lun = chip->max_lun = rts51x_get_max_lun(us);
+	chip->us = us;
 
 	usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun);
 
@@ -1010,10 +1012,8 @@
 			SET_AUTO_DELINK(chip);
 	}
 #ifdef CONFIG_REALTEK_AUTOPM
-	if (ss_en) {
-		chip->us = us;
+	if (ss_en)
 		realtek_cr_autosuspend_setup(us);
-	}
 #endif
 
 	usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d71d60f..2e937bd 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2199,7 +2199,7 @@
 
 config FB_GOLDFISH
 	tristate "Goldfish Framebuffer"
-	depends on FB
+	depends on FB && HAS_DMA
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -2453,6 +2453,23 @@
 	help
 	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
 
+config FB_SIMPLE
+	bool "Simple framebuffer support"
+	depends on (FB = y) && OF
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y if you want support for a simple frame-buffer.
+
+	  This driver assumes that the display hardware has been initialized
+	  before the kernel boots, and the kernel will simply render to the
+	  pre-allocated frame buffer surface.
+
+	  Configuration re: surface address, size, and format must be provided
+	  through device tree, or potentially plain old platform data in the
+	  future.
+
 source "drivers/video/omap/Kconfig"
 source "drivers/video/omap2/Kconfig"
 source "drivers/video/exynos/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 7234e4a..e8bae8d 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -166,6 +166,7 @@
 obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
 obj-$(CONFIG_FB_MXS)		  += mxsfb.o
 obj-$(CONFIG_FB_SSD1307)	  += ssd1307fb.o
+obj-$(CONFIG_FB_SIMPLE)           += simplefb.o
 
 # the test framebuffer is last
 obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile
index a862e91..48da25c 100644
--- a/drivers/video/console/Makefile
+++ b/drivers/video/console/Makefile
@@ -18,6 +18,8 @@
 
 font-objs += $(font-objs-y)
 
+obj-$(CONFIG_FONTS) += font.o
+
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_DUMMY_CONSOLE)       += dummycon.o
diff --git a/drivers/video/simplefb.c b/drivers/video/simplefb.c
new file mode 100644
index 0000000..e2e9e3e
--- /dev/null
+++ b/drivers/video/simplefb.c
@@ -0,0 +1,234 @@
+/*
+ * Simplest possible simple frame-buffer driver, as a platform device
+ *
+ * Copyright (c) 2013, Stephen Warren
+ *
+ * Based on q40fb.c, which was:
+ * Copyright (C) 2001 Richard Zidlicky <rz@linux-m68k.org>
+ *
+ * Also based on offb.c, which was:
+ * Copyright (C) 1997 Geert Uytterhoeven
+ * Copyright (C) 1996 Paul Mackerras
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+static struct fb_fix_screeninfo simplefb_fix = {
+	.id		= "simple",
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_TRUECOLOR,
+	.accel		= FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo simplefb_var = {
+	.height		= -1,
+	.width		= -1,
+	.activate	= FB_ACTIVATE_NOW,
+	.vmode		= FB_VMODE_NONINTERLACED,
+};
+
+static int simplefb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+			      u_int transp, struct fb_info *info)
+{
+	u32 *pal = info->pseudo_palette;
+	u32 cr = red >> (16 - info->var.red.length);
+	u32 cg = green >> (16 - info->var.green.length);
+	u32 cb = blue >> (16 - info->var.blue.length);
+	u32 value;
+
+	if (regno >= 16)
+		return -EINVAL;
+
+	value = (cr << info->var.red.offset) |
+		(cg << info->var.green.offset) |
+		(cb << info->var.blue.offset);
+	if (info->var.transp.length > 0) {
+		u32 mask = (1 << info->var.transp.length) - 1;
+		mask <<= info->var.transp.offset;
+		value |= mask;
+	}
+	pal[regno] = value;
+
+	return 0;
+}
+
+static struct fb_ops simplefb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_setcolreg	= simplefb_setcolreg,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+struct simplefb_format {
+	const char *name;
+	u32 bits_per_pixel;
+	struct fb_bitfield red;
+	struct fb_bitfield green;
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;
+};
+
+static struct simplefb_format simplefb_formats[] = {
+	{ "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0} },
+};
+
+struct simplefb_params {
+	u32 width;
+	u32 height;
+	u32 stride;
+	struct simplefb_format *format;
+};
+
+static int simplefb_parse_dt(struct platform_device *pdev,
+			   struct simplefb_params *params)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+	const char *format;
+	int i;
+
+	ret = of_property_read_u32(np, "width", &params->width);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't parse width property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "height", &params->height);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't parse height property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "stride", &params->stride);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't parse stride property\n");
+		return ret;
+	}
+
+	ret = of_property_read_string(np, "format", &format);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't parse format property\n");
+		return ret;
+	}
+	params->format = NULL;
+	for (i = 0; i < ARRAY_SIZE(simplefb_formats); i++) {
+		if (strcmp(format, simplefb_formats[i].name))
+			continue;
+		params->format = &simplefb_formats[i];
+		break;
+	}
+	if (!params->format) {
+		dev_err(&pdev->dev, "Invalid format value\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int simplefb_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct simplefb_params params;
+	struct fb_info *info;
+	struct resource *mem;
+
+	if (fb_get_options("simplefb", NULL))
+		return -ENODEV;
+
+	ret = simplefb_parse_dt(pdev, &params);
+	if (ret)
+		return ret;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "No memory resource\n");
+		return -EINVAL;
+	}
+
+	info = framebuffer_alloc(sizeof(u32) * 16, &pdev->dev);
+	if (!info)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, info);
+
+	info->fix = simplefb_fix;
+	info->fix.smem_start = mem->start;
+	info->fix.smem_len = resource_size(mem);
+	info->fix.line_length = params.stride;
+
+	info->var = simplefb_var;
+	info->var.xres = params.width;
+	info->var.yres = params.height;
+	info->var.xres_virtual = params.width;
+	info->var.yres_virtual = params.height;
+	info->var.bits_per_pixel = params.format->bits_per_pixel;
+	info->var.red = params.format->red;
+	info->var.green = params.format->green;
+	info->var.blue = params.format->blue;
+	info->var.transp = params.format->transp;
+
+	info->fbops = &simplefb_ops;
+	info->flags = FBINFO_DEFAULT;
+	info->screen_base = devm_ioremap(&pdev->dev, info->fix.smem_start,
+					 info->fix.smem_len);
+	if (!info->screen_base) {
+		framebuffer_release(info);
+		return -ENODEV;
+	}
+	info->pseudo_palette = (void *)(info + 1);
+
+	ret = register_framebuffer(info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Unable to register simplefb: %d\n", ret);
+		framebuffer_release(info);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "fb%d: simplefb registered!\n", info->node);
+
+	return 0;
+}
+
+static int simplefb_remove(struct platform_device *pdev)
+{
+	struct fb_info *info = platform_get_drvdata(pdev);
+
+	unregister_framebuffer(info);
+	framebuffer_release(info);
+
+	return 0;
+}
+
+static const struct of_device_id simplefb_of_match[] = {
+	{ .compatible = "simple-framebuffer", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, simplefb_of_match);
+
+static struct platform_driver simplefb_driver = {
+	.driver = {
+		.name = "simple-framebuffer",
+		.owner = THIS_MODULE,
+		.of_match_table = simplefb_of_match,
+	},
+	.probe = simplefb_probe,
+	.remove = simplefb_remove,
+};
+module_platform_driver(simplefb_driver);
+
+MODULE_AUTHOR("Stephen Warren <swarren@wwwdotorg.org>");
+MODULE_DESCRIPTION("Simple framebuffer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/fs/aio.c b/fs/aio.c
index c5b1a8c..7fe5bde 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -307,7 +307,9 @@
 	kunmap_atomic(ring);
 
 	while (atomic_read(&ctx->reqs_active) > 0) {
-		wait_event(ctx->wait, head != ctx->tail);
+		wait_event(ctx->wait,
+				head != ctx->tail ||
+				atomic_read(&ctx->reqs_active) <= 0);
 
 		avail = (head <= ctx->tail ? ctx->tail : ctx->nr_events) - head;
 
@@ -1299,8 +1301,7 @@
  *	< min_nr if the timeout specified by timeout has elapsed
  *	before sufficient events are available, where timeout == NULL
  *	specifies an infinite timeout. Note that the timeout pointed to by
- *	timeout is relative and will be updated if not NULL and the
- *	operation blocks. Will fail with -ENOSYS if not implemented.
+ *	timeout is relative.  Will fail with -ENOSYS if not implemented.
  */
 SYSCALL_DEFINE5(io_getevents, aio_context_t, ctx_id,
 		long, min_nr,
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index fc30251..20efd81 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -171,7 +171,8 @@
 
 	if (fattr->cf_flags & CIFS_FATTR_DFS_REFERRAL)
 		inode->i_flags |= S_AUTOMOUNT;
-	cifs_set_ops(inode);
+	if (inode->i_state & I_NEW)
+		cifs_set_ops(inode);
 }
 
 void
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index dfce656..5d4513c 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -1229,6 +1229,19 @@
 	return 0;
 }
 
+static unsigned long calc_fat_clusters(struct super_block *sb)
+{
+	struct msdos_sb_info *sbi = MSDOS_SB(sb);
+
+	/* Divide first to avoid overflow */
+	if (sbi->fat_bits != 12) {
+		unsigned long ent_per_sec = sb->s_blocksize * 8 / sbi->fat_bits;
+		return ent_per_sec * sbi->fat_length;
+	}
+
+	return sbi->fat_length * sb->s_blocksize * 8 / sbi->fat_bits;
+}
+
 /*
  * Read the super block of an MS-DOS FS.
  */
@@ -1434,7 +1447,7 @@
 		sbi->dirty = b->fat16.state & FAT_STATE_DIRTY;
 
 	/* check that FAT table does not overflow */
-	fat_clusters = sbi->fat_length * sb->s_blocksize * 8 / sbi->fat_bits;
+	fat_clusters = calc_fat_clusters(sb);
 	total_clusters = min(total_clusters, fat_clusters - FAT_START_ENT);
 	if (total_clusters > MAX_FAT(sb)) {
 		if (!silent)
diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig
index eb08c9e..5a376ab 100644
--- a/fs/gfs2/Kconfig
+++ b/fs/gfs2/Kconfig
@@ -26,7 +26,7 @@
 config GFS2_FS_LOCKING_DLM
 	bool "GFS2 DLM locking"
 	depends on (GFS2_FS!=n) && NET && INET && (IPV6 || IPV6=n) && \
-		HOTPLUG && DLM && CONFIGFS_FS && SYSFS
+		HOTPLUG && CONFIGFS_FS && SYSFS && (DLM=y || DLM=GFS2_FS)
 	help
 	  Multiple node locking module for GFS2
 
diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index c5fa758..68b4c8f 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -212,7 +212,7 @@
 		fs_err(sdp, "Error %d writing to log\n", error);
 	}
 
-	bio_for_each_segment(bvec, bio, i) {
+	bio_for_each_segment_all(bvec, bio, i) {
 		page = bvec->bv_page;
 		if (page_has_buffers(page))
 			gfs2_end_log_write_bh(sdp, bvec, error);
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index c7c840e..c253b13 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -121,7 +121,7 @@
 {
 	struct kqid qid = qd->qd_id;
 	return (2 * (u64)from_kqid(&init_user_ns, qid)) +
-		(qid.type == USRQUOTA) ? 0 : 1;
+		((qid.type == USRQUOTA) ? 0 : 1);
 }
 
 static u64 qd2offset(struct gfs2_quota_data *qd)
@@ -721,7 +721,7 @@
 			goto unlock_out;
 	}
 
-	gfs2_trans_add_meta(ip->i_gl, bh);
+	gfs2_trans_add_data(ip->i_gl, bh);
 
 	kaddr = kmap_atomic(page);
 	if (offset + sizeof(struct gfs2_quota) > PAGE_CACHE_SIZE)
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 0c5a575..5232525 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1401,9 +1401,14 @@
 	u32 extlen;
 	u32 free_blocks = rgd->rd_free_clone - rgd->rd_reserved;
 	int ret;
+	struct inode *inode = &ip->i_inode;
 
-	extlen = max_t(u32, atomic_read(&rs->rs_sizehint), requested);
-	extlen = clamp(extlen, RGRP_RSRV_MINBLKS, free_blocks);
+	if (S_ISDIR(inode->i_mode))
+		extlen = 1;
+	else {
+		extlen = max_t(u32, atomic_read(&rs->rs_sizehint), requested);
+		extlen = clamp(extlen, RGRP_RSRV_MINBLKS, free_blocks);
+	}
 	if ((rgd->rd_free_clone < rgd->rd_reserved) || (free_blocks < extlen))
 		return;
 
diff --git a/fs/hfs/bnode.c b/fs/hfs/bnode.c
index f3b1a15..d3fa6bd 100644
--- a/fs/hfs/bnode.c
+++ b/fs/hfs/bnode.c
@@ -415,7 +415,11 @@
 	spin_lock(&tree->hash_lock);
 	node = hfs_bnode_findhash(tree, num);
 	spin_unlock(&tree->hash_lock);
-	BUG_ON(node);
+	if (node) {
+		pr_crit("new node %u already hashed?\n", num);
+		WARN_ON(1);
+		return node;
+	}
 	node = __hfs_bnode_create(tree, num);
 	if (!node)
 		return ERR_PTR(-ENOMEM);
diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index a13d26e..0bc2768 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -414,7 +414,7 @@
 
 	spin_lock(&tbl->slot_tbl_lock);
 	/* state manager is resetting the session */
-	if (test_bit(NFS4_SESSION_DRAINING, &clp->cl_session->session_state)) {
+	if (test_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state)) {
 		spin_unlock(&tbl->slot_tbl_lock);
 		status = htonl(NFS4ERR_DELAY);
 		/* Return NFS4ERR_BADSESSION if we're draining the session
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index 59461c9..a35582c 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -763,7 +763,7 @@
 	 * A single slot, so highest used slotid is either 0 or -1
 	 */
 	tbl->highest_used_slotid = NFS4_NO_SLOT;
-	nfs4_session_drain_complete(session, tbl);
+	nfs4_slot_tbl_drain_complete(tbl);
 	spin_unlock(&tbl->slot_tbl_lock);
 }
 
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index 947b0c9..4cbad5d 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -203,7 +203,7 @@
 	__set_bit(NFS_CS_DISCRTRY, &clp->cl_flags);
 	error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_GSS_KRB5I);
 	if (error == -EINVAL)
-		error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_NULL);
+		error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_UNIX);
 	if (error < 0)
 		goto error;
 
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 8fbc100..4e2fe71 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -572,7 +572,7 @@
 	task->tk_timeout = 0;
 
 	spin_lock(&tbl->slot_tbl_lock);
-	if (test_bit(NFS4_SESSION_DRAINING, &session->session_state) &&
+	if (test_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state) &&
 	    !args->sa_privileged) {
 		/* The state manager will wait until the slot table is empty */
 		dprintk("%s session is draining\n", __func__);
diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c
index ebda5f4..c4e225e 100644
--- a/fs/nfs/nfs4session.c
+++ b/fs/nfs/nfs4session.c
@@ -73,7 +73,7 @@
 			tbl->highest_used_slotid = new_max;
 		else {
 			tbl->highest_used_slotid = NFS4_NO_SLOT;
-			nfs4_session_drain_complete(tbl->session, tbl);
+			nfs4_slot_tbl_drain_complete(tbl);
 		}
 	}
 	dprintk("%s: slotid %u highest_used_slotid %d\n", __func__,
@@ -226,7 +226,7 @@
 	struct nfs4_slot *slot = pslot;
 	struct nfs4_slot_table *tbl = slot->table;
 
-	if (nfs4_session_draining(tbl->session) && !args->sa_privileged)
+	if (nfs4_slot_tbl_draining(tbl) && !args->sa_privileged)
 		return false;
 	slot->generation = tbl->generation;
 	args->sa_slot = slot;
diff --git a/fs/nfs/nfs4session.h b/fs/nfs/nfs4session.h
index 6f3cb39..ff7d9f0 100644
--- a/fs/nfs/nfs4session.h
+++ b/fs/nfs/nfs4session.h
@@ -25,6 +25,10 @@
 };
 
 /* Sessions */
+enum nfs4_slot_tbl_state {
+	NFS4_SLOT_TBL_DRAINING,
+};
+
 #define SLOT_TABLE_SZ DIV_ROUND_UP(NFS4_MAX_SLOT_TABLE, 8*sizeof(long))
 struct nfs4_slot_table {
 	struct nfs4_session *session;		/* Parent session */
@@ -43,6 +47,7 @@
 	unsigned long	generation;		/* Generation counter for
 						   target_highest_slotid */
 	struct completion complete;
+	unsigned long	slot_tbl_state;
 };
 
 /*
@@ -68,7 +73,6 @@
 
 enum nfs4_session_state {
 	NFS4_SESSION_INITING,
-	NFS4_SESSION_DRAINING,
 };
 
 #if defined(CONFIG_NFS_V4_1)
@@ -88,12 +92,11 @@
 extern int nfs4_init_session(struct nfs_server *server);
 extern int nfs4_init_ds_session(struct nfs_client *, unsigned long);
 
-extern void nfs4_session_drain_complete(struct nfs4_session *session,
-		struct nfs4_slot_table *tbl);
+extern void nfs4_slot_tbl_drain_complete(struct nfs4_slot_table *tbl);
 
-static inline bool nfs4_session_draining(struct nfs4_session *session)
+static inline bool nfs4_slot_tbl_draining(struct nfs4_slot_table *tbl)
 {
-	return !!test_bit(NFS4_SESSION_DRAINING, &session->session_state);
+	return !!test_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state);
 }
 
 bool nfs41_wake_and_assign_slot(struct nfs4_slot_table *tbl,
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 300d17d..1fab140 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -241,7 +241,7 @@
 	if (ses == NULL)
 		return;
 	tbl = &ses->fc_slot_table;
-	if (test_and_clear_bit(NFS4_SESSION_DRAINING, &ses->session_state)) {
+	if (test_and_clear_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state)) {
 		spin_lock(&tbl->slot_tbl_lock);
 		nfs41_wake_slot_table(tbl);
 		spin_unlock(&tbl->slot_tbl_lock);
@@ -251,15 +251,15 @@
 /*
  * Signal state manager thread if session fore channel is drained
  */
-void nfs4_session_drain_complete(struct nfs4_session *session,
-		struct nfs4_slot_table *tbl)
+void nfs4_slot_tbl_drain_complete(struct nfs4_slot_table *tbl)
 {
-	if (nfs4_session_draining(session))
+	if (nfs4_slot_tbl_draining(tbl))
 		complete(&tbl->complete);
 }
 
-static int nfs4_wait_on_slot_tbl(struct nfs4_slot_table *tbl)
+static int nfs4_drain_slot_tbl(struct nfs4_slot_table *tbl)
 {
+	set_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state);
 	spin_lock(&tbl->slot_tbl_lock);
 	if (tbl->highest_used_slotid != NFS4_NO_SLOT) {
 		INIT_COMPLETION(tbl->complete);
@@ -275,13 +275,12 @@
 	struct nfs4_session *ses = clp->cl_session;
 	int ret = 0;
 
-	set_bit(NFS4_SESSION_DRAINING, &ses->session_state);
 	/* back channel */
-	ret = nfs4_wait_on_slot_tbl(&ses->bc_slot_table);
+	ret = nfs4_drain_slot_tbl(&ses->bc_slot_table);
 	if (ret)
 		return ret;
 	/* fore channel */
-	return nfs4_wait_on_slot_tbl(&ses->fc_slot_table);
+	return nfs4_drain_slot_tbl(&ses->fc_slot_table);
 }
 
 static void nfs41_finish_session_reset(struct nfs_client *clp)
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 689fb60..bccfec8 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -219,13 +219,32 @@
 
 static int nilfs_set_page_dirty(struct page *page)
 {
-	int ret = __set_page_dirty_buffers(page);
+	int ret = __set_page_dirty_nobuffers(page);
 
-	if (ret) {
+	if (page_has_buffers(page)) {
 		struct inode *inode = page->mapping->host;
-		unsigned nr_dirty = 1 << (PAGE_SHIFT - inode->i_blkbits);
+		unsigned nr_dirty = 0;
+		struct buffer_head *bh, *head;
 
-		nilfs_set_file_dirty(inode, nr_dirty);
+		/*
+		 * This page is locked by callers, and no other thread
+		 * concurrently marks its buffers dirty since they are
+		 * only dirtied through routines in fs/buffer.c in
+		 * which call sites of mark_buffer_dirty are protected
+		 * by page lock.
+		 */
+		bh = head = page_buffers(page);
+		do {
+			/* Do not mark hole blocks dirty */
+			if (buffer_dirty(bh) || !buffer_mapped(bh))
+				continue;
+
+			set_buffer_dirty(bh);
+			nr_dirty++;
+		} while (bh = bh->b_this_page, bh != head);
+
+		if (nr_dirty)
+			nilfs_set_file_dirty(inode, nr_dirty);
 	}
 	return ret;
 }
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index 1c39efb..2487116 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -790,7 +790,7 @@
 						 &hole_size, &rec, &is_last);
 		if (ret) {
 			mlog_errno(ret);
-			goto out;
+			goto out_unlock;
 		}
 
 		if (rec.e_blkno == 0ULL) {
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 8a7509f..ff54014 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2288,7 +2288,7 @@
 		ret = ocfs2_inode_lock(inode, NULL, 1);
 		if (ret < 0) {
 			mlog_errno(ret);
-			goto out_sems;
+			goto out;
 		}
 
 		ocfs2_inode_unlock(inode, 1);
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index 2b2691b..41a6950 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -725,6 +725,25 @@
 			(xfs_off_t)(page->index + 1) << PAGE_CACHE_SHIFT,
 			i_size_read(inode));
 
+	/*
+	 * If the current map does not span the entire page we are about to try
+	 * to write, then give up. The only way we can write a page that spans
+	 * multiple mappings in a single writeback iteration is via the
+	 * xfs_vm_writepage() function. Data integrity writeback requires the
+	 * entire page to be written in a single attempt, otherwise the part of
+	 * the page we don't write here doesn't get written as part of the data
+	 * integrity sync.
+	 *
+	 * For normal writeback, we also don't attempt to write partial pages
+	 * here as it simply means that write_cache_pages() will see it under
+	 * writeback and ignore the page until some point in the future, at
+	 * which time this will be the only page in the file that needs
+	 * writeback.  Hence for more optimal IO patterns, we should always
+	 * avoid partial page writeback due to multiple mappings on a page here.
+	 */
+	if (!xfs_imap_valid(inode, imap, end_offset))
+		goto fail_unlock_page;
+
 	len = 1 << inode->i_blkbits;
 	p_offset = min_t(unsigned long, end_offset & (PAGE_CACHE_SIZE - 1),
 					PAGE_CACHE_SIZE);
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index 08d5457..0bce1b3 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -931,20 +931,22 @@
  */
 int
 xfs_attr_shortform_allfit(
-	struct xfs_buf	*bp,
-	struct xfs_inode *dp)
+	struct xfs_buf		*bp,
+	struct xfs_inode	*dp)
 {
-	xfs_attr_leafblock_t *leaf;
-	xfs_attr_leaf_entry_t *entry;
+	struct xfs_attr_leafblock *leaf;
+	struct xfs_attr_leaf_entry *entry;
 	xfs_attr_leaf_name_local_t *name_loc;
-	int bytes, i;
+	struct xfs_attr3_icleaf_hdr leafhdr;
+	int			bytes;
+	int			i;
 
 	leaf = bp->b_addr;
-	ASSERT(leaf->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC));
+	xfs_attr3_leaf_hdr_from_disk(&leafhdr, leaf);
+	entry = xfs_attr3_leaf_entryp(leaf);
 
-	entry = &leaf->entries[0];
 	bytes = sizeof(struct xfs_attr_sf_hdr);
-	for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) {
+	for (i = 0; i < leafhdr.count; entry++, i++) {
 		if (entry->flags & XFS_ATTR_INCOMPLETE)
 			continue;		/* don't copy partial entries */
 		if (!(entry->flags & XFS_ATTR_LOCAL))
@@ -954,15 +956,15 @@
 			return(0);
 		if (be16_to_cpu(name_loc->valuelen) >= XFS_ATTR_SF_ENTSIZE_MAX)
 			return(0);
-		bytes += sizeof(struct xfs_attr_sf_entry)-1
+		bytes += sizeof(struct xfs_attr_sf_entry) - 1
 				+ name_loc->namelen
 				+ be16_to_cpu(name_loc->valuelen);
 	}
 	if ((dp->i_mount->m_flags & XFS_MOUNT_ATTR2) &&
 	    (dp->i_d.di_format != XFS_DINODE_FMT_BTREE) &&
 	    (bytes == sizeof(struct xfs_attr_sf_hdr)))
-		return(-1);
-	return(xfs_attr_shortform_bytesfit(dp, bytes));
+		return -1;
+	return xfs_attr_shortform_bytesfit(dp, bytes);
 }
 
 /*
@@ -2330,9 +2332,10 @@
 			if (!xfs_attr_namesp_match(args->flags, entry->flags))
 				continue;
 			args->index = probe;
+			args->valuelen = be32_to_cpu(name_rmt->valuelen);
 			args->rmtblkno = be32_to_cpu(name_rmt->valueblk);
 			args->rmtblkcnt = XFS_B_TO_FSB(args->dp->i_mount,
-						   be32_to_cpu(name_rmt->valuelen));
+						       args->valuelen);
 			return XFS_ERROR(EEXIST);
 		}
 	}
diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index 82b70bd..0d25542 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -1649,7 +1649,7 @@
 {
 	xfs_buftarg_t		*btp;
 
-	btp = kmem_zalloc(sizeof(*btp), KM_SLEEP);
+	btp = kmem_zalloc(sizeof(*btp), KM_SLEEP | KM_NOFS);
 
 	btp->bt_mount = mp;
 	btp->bt_dev =  bdev->bd_dev;
diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
index 9b26a99..0b8b2a1 100644
--- a/fs/xfs/xfs_da_btree.c
+++ b/fs/xfs/xfs_da_btree.c
@@ -270,6 +270,7 @@
 				break;
 			return;
 		case XFS_ATTR_LEAF_MAGIC:
+		case XFS_ATTR3_LEAF_MAGIC:
 			bp->b_ops = &xfs_attr3_leaf_buf_ops;
 			bp->b_ops->verify_read(bp);
 			return;
@@ -2464,7 +2465,8 @@
 	ASSERT(nirecs >= 1);
 
 	if (nirecs > 1) {
-		map = kmem_zalloc(nirecs * sizeof(struct xfs_buf_map), KM_SLEEP);
+		map = kmem_zalloc(nirecs * sizeof(struct xfs_buf_map),
+				  KM_SLEEP | KM_NOFS);
 		if (!map)
 			return ENOMEM;
 		*mapp = map;
@@ -2520,7 +2522,8 @@
 		 * Optimize the one-block case.
 		 */
 		if (nfsb != 1)
-			irecs = kmem_zalloc(sizeof(irec) * nfsb, KM_SLEEP);
+			irecs = kmem_zalloc(sizeof(irec) * nfsb,
+					    KM_SLEEP | KM_NOFS);
 
 		nirecs = nfsb;
 		error = xfs_bmapi_read(dp, (xfs_fileoff_t)bno, nfsb, irecs,
diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c
index 721ba2f..da71a18 100644
--- a/fs/xfs/xfs_dir2_leaf.c
+++ b/fs/xfs/xfs_dir2_leaf.c
@@ -1336,7 +1336,7 @@
 				     mp->m_sb.sb_blocksize);
 	map_info = kmem_zalloc(offsetof(struct xfs_dir2_leaf_map_info, map) +
 				(length * sizeof(struct xfs_bmbt_irec)),
-			       KM_SLEEP);
+			       KM_SLEEP | KM_NOFS);
 	map_info->map_size = length;
 
 	/*
diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c
index c0f3750..452920a 100644
--- a/fs/xfs/xfs_extfree_item.c
+++ b/fs/xfs/xfs_extfree_item.c
@@ -305,11 +305,12 @@
 {
 	ASSERT(atomic_read(&efip->efi_next_extent) >= nextents);
 	if (atomic_sub_and_test(nextents, &efip->efi_next_extent)) {
-		__xfs_efi_release(efip);
-
 		/* recovery needs us to drop the EFI reference, too */
 		if (test_bit(XFS_EFI_RECOVERED, &efip->efi_flags))
 			__xfs_efi_release(efip);
+
+		__xfs_efi_release(efip);
+		/* efip may now have been freed, do not reference it again. */
 	}
 }
 
diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c
index e3d0b85..d0833b5 100644
--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -139,7 +139,7 @@
 
 		new_lv = kmem_zalloc(sizeof(*new_lv) +
 				niovecs * sizeof(struct xfs_log_iovec),
-				KM_SLEEP);
+				KM_SLEEP|KM_NOFS);
 
 		/* The allocated iovec region lies beyond the log vector. */
 		new_lv->lv_iovecp = (struct xfs_log_iovec *)&new_lv[1];
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 1501f4f..0176bb2 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -1453,7 +1453,7 @@
 	xfs_mount_t		*mp;
 	int			nimap;
 	uint			resblks;
-	uint			rounding;
+	xfs_off_t		rounding;
 	int			rt;
 	xfs_fileoff_t		startoffset_fsb;
 	xfs_trans_t		*tp;
@@ -1482,7 +1482,7 @@
 		inode_dio_wait(VFS_I(ip));
 	}
 
-	rounding = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE);
+	rounding = max_t(xfs_off_t, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE);
 	ioffset = offset & ~(rounding - 1);
 	error = -filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
 					      ioffset, -1);
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 98db31d..636c59f 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -377,7 +377,6 @@
 				       unsigned long long *sta);
 int acpi_bus_get_status(struct acpi_device *device);
 
-#ifdef CONFIG_PM
 int acpi_bus_set_power(acpi_handle handle, int state);
 const char *acpi_power_state_string(int state);
 int acpi_device_get_power(struct acpi_device *device, int *state);
@@ -385,41 +384,12 @@
 int acpi_bus_init_power(struct acpi_device *device);
 int acpi_bus_update_power(acpi_handle handle, int *state_p);
 bool acpi_bus_power_manageable(acpi_handle handle);
+
+#ifdef CONFIG_PM
 bool acpi_bus_can_wakeup(acpi_handle handle);
-#else /* !CONFIG_PM */
-static inline int acpi_bus_set_power(acpi_handle handle, int state)
-{
-	return 0;
-}
-static inline const char *acpi_power_state_string(int state)
-{
-	return "D0";
-}
-static inline int acpi_device_get_power(struct acpi_device *device, int *state)
-{
-	return 0;
-}
-static inline int acpi_device_set_power(struct acpi_device *device, int state)
-{
-	return 0;
-}
-static inline int acpi_bus_init_power(struct acpi_device *device)
-{
-	return 0;
-}
-static inline int acpi_bus_update_power(acpi_handle handle, int *state_p)
-{
-	return 0;
-}
-static inline bool acpi_bus_power_manageable(acpi_handle handle)
-{
-	return false;
-}
-static inline bool acpi_bus_can_wakeup(acpi_handle handle)
-{
-	return false;
-}
-#endif /* !CONFIG_PM */
+#else
+static inline bool acpi_bus_can_wakeup(acpi_handle handle) { return false; }
+#endif
 
 #ifdef CONFIG_ACPI_PROC_EVENT
 int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data);
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index c2af598..bb1bc48 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -152,6 +152,12 @@
 	{0x1002, 0x6621, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6623, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6631, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6663, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6664, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6665, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6667, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x666F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h
index d09deab..fb02980 100644
--- a/include/linux/acpi_dma.h
+++ b/include/linux/acpi_dma.h
@@ -37,6 +37,8 @@
  * @dev:		struct device of this controller
  * @acpi_dma_xlate:	callback function to find a suitable channel
  * @data:		private data used by a callback function
+ * @base_request_line:	first supported request line (CSRT)
+ * @end_request_line:	last supported request line (CSRT)
  */
 struct acpi_dma {
 	struct list_head	dma_controllers;
@@ -44,6 +46,8 @@
 	struct dma_chan		*(*acpi_dma_xlate)
 				(struct acpi_dma_spec *, struct acpi_dma *);
 	void			*data;
+	unsigned short		base_request_line;
+	unsigned short		end_request_line;
 };
 
 /* Used with acpi_dma_simple_xlate() */
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index f14a98a..2e34db8 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -134,7 +134,10 @@
 #define BCMA_CORE_I2S			0x834
 #define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
 #define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
-#define BCMA_CORE_ARM_CR4		0x83e
+#define BCMA_CORE_PHY_AC		0x83B
+#define BCMA_CORE_PCIE2			0x83C	/* PCI Express Gen2 */
+#define BCMA_CORE_USB30_DEV		0x83D
+#define BCMA_CORE_ARM_CR4		0x83E
 #define BCMA_CORE_DEFAULT		0xFFF
 
 #define BCMA_MAX_NR_CORES		16
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index b840a49..677b4f0 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -1,3 +1,6 @@
+#ifndef _LINUX_BRCMPHY_H
+#define _LINUX_BRCMPHY_H
+
 #define PHY_ID_BCM50610			0x0143bd60
 #define PHY_ID_BCM50610M		0x0143bd70
 #define PHY_ID_BCM5241			0x0143bc30
@@ -29,3 +32,5 @@
 #define PHY_BRCM_CLEAR_RGMII_MODE	0x00004000
 #define PHY_BRCM_DIS_TXCRXC_NOENRGY	0x00008000
 #define PHY_BCM_FLAGS_VALID		0x80000000
+
+#endif /* _LINUX_BRCMPHY_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index e96329c..e9ef6d6 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -562,6 +562,9 @@
 extern __printf(2, 3)
 int __trace_printk(unsigned long ip, const char *fmt, ...);
 
+extern int __trace_bputs(unsigned long ip, const char *str);
+extern int __trace_puts(unsigned long ip, const char *str, int size);
+
 /**
  * trace_puts - write a string into the ftrace buffer
  * @str: the string to record
@@ -587,8 +590,6 @@
  *  (1 when __trace_bputs is used, strlen(str) when __trace_puts is used)
  */
 
-extern int __trace_bputs(unsigned long ip, const char *str);
-extern int __trace_puts(unsigned long ip, const char *str, int size);
 #define trace_puts(str) ({						\
 	static const char *trace_printk_fmt				\
 		__attribute__((section("__trace_printk_fmt"))) =	\
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index fb1bf7d..0390d59 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -373,13 +373,11 @@
 /**
  * struct ab8500_platform_data - AB8500 platform data
  * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
- * @pm_power_off: Should machine pm power off hook be registered or not
  * @init: board-specific initialization after detection of ab8500
  * @regulator: machine-specific constraints for regulators
  */
 struct ab8500_platform_data {
 	int irq_base;
-	bool pm_power_off;
 	void (*init) (struct ab8500 *);
 	struct ab8500_regulator_platform_data *regulator;
 	struct abx500_gpio_platform_data *gpio;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index a94a5a0..60584b1 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2733,6 +2733,17 @@
 }
 netdev_features_t netdev_increment_features(netdev_features_t all,
 	netdev_features_t one, netdev_features_t mask);
+
+/* Allow TSO being used on stacked device :
+ * Performing the GSO segmentation before last device
+ * is a performance improvement.
+ */
+static inline netdev_features_t netdev_add_tso_features(netdev_features_t features,
+							netdev_features_t mask)
+{
+	return netdev_increment_features(features, NETIF_F_ALL_TSO, mask);
+}
+
 int __netdev_update_features(struct net_device *dev);
 void netdev_update_features(struct net_device *dev);
 void netdev_change_features(struct net_device *dev);
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 81b3161..1704479 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -60,11 +60,13 @@
 void acpiphp_init(void);
 void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle);
 void acpiphp_remove_slots(struct pci_bus *bus);
+void acpiphp_check_host_bridge(acpi_handle handle);
 #else
 static inline void acpiphp_init(void) { }
 static inline void acpiphp_enumerate_slots(struct pci_bus *bus,
 					   acpi_handle handle) { }
 static inline void acpiphp_remove_slots(struct pci_bus *bus) { }
+static inline void acpiphp_check_host_bridge(acpi_handle handle) { }
 #endif
 
 #else	/* CONFIG_ACPI */
diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h
index 528e73c..2390199 100644
--- a/include/linux/platform_data/clk-lpss.h
+++ b/include/linux/platform_data/clk-lpss.h
@@ -13,6 +13,11 @@
 #ifndef __CLK_LPSS_H
 #define __CLK_LPSS_H
 
+struct lpss_clk_data {
+	const char *name;
+	struct clk *clk;
+};
+
 extern int lpt_clk_init(void);
 
 #endif /* __CLK_LPSS_H */
diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h
index ff9b0aa..c860c1b 100644
--- a/include/linux/platform_data/serial-omap.h
+++ b/include/linux/platform_data/serial-omap.h
@@ -43,8 +43,6 @@
 	int			DTR_present;
 
 	int (*get_context_loss_count)(struct device *);
-	void (*set_forceidle)(struct device *);
-	void (*set_noidle)(struct device *);
 	void (*enable_wakeup)(struct device *, bool);
 };
 
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 6af944a..22c7052 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -4,6 +4,7 @@
 #include <stdarg.h>
 #include <linux/init.h>
 #include <linux/kern_levels.h>
+#include <linux/linkage.h>
 
 extern const char linux_banner[];
 extern const char linux_proc_banner[];
diff --git a/include/linux/rio.h b/include/linux/rio.h
index a3e7842..18e0993 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -83,7 +83,6 @@
 
 extern struct bus_type rio_bus_type;
 extern struct device rio_bus;
-extern struct list_head rio_devices;	/* list of all devices */
 
 struct rio_mport;
 struct rio_dev;
@@ -237,6 +236,7 @@
  * @name: Port name string
  * @priv: Master port private data
  * @dma: DMA device associated with mport
+ * @nscan: RapidIO network enumeration/discovery operations
  */
 struct rio_mport {
 	struct list_head dbells;	/* list of doorbell events */
@@ -262,8 +262,14 @@
 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
 	struct dma_device	dma;
 #endif
+	struct rio_scan *nscan;
 };
 
+/*
+ * Enumeration/discovery control flags
+ */
+#define RIO_SCAN_ENUM_NO_WAIT	0x00000001 /* Do not wait for enum completed */
+
 struct rio_id_table {
 	u16 start;	/* logical minimal id */
 	u32 max;	/* max number of IDs in table */
@@ -460,6 +466,16 @@
 }
 #endif /* CONFIG_RAPIDIO_DMA_ENGINE */
 
+/**
+ * struct rio_scan - RIO enumeration and discovery operations
+ * @enumerate: Callback to perform RapidIO fabric enumeration.
+ * @discover: Callback to perform RapidIO fabric discovery.
+ */
+struct rio_scan {
+	int (*enumerate)(struct rio_mport *mport, u32 flags);
+	int (*discover)(struct rio_mport *mport, u32 flags);
+};
+
 /* Architecture and hardware-specific functions */
 extern int rio_register_mport(struct rio_mport *);
 extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int);
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
index b75c059..5059994 100644
--- a/include/linux/rio_drv.h
+++ b/include/linux/rio_drv.h
@@ -433,5 +433,6 @@
 extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from);
 extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did,
 				   struct rio_dev *from);
+extern int rio_init_mports(void);
 
 #endif				/* LINUX_RIO_DRV_H */
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 428c37a..33bf2df 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -305,7 +305,6 @@
 
 extern void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred);
 
-extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
 extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
 			       int offset, int len);
 extern int csum_partial_copy_fromiovecend(unsigned char *kdata, 
@@ -314,7 +313,6 @@
 					  unsigned int len, __wsum *csump);
 
 extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *address, int mode);
-extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
 extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
 			     int offset, int len);
 extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr);
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 629aaf5..c55ce24 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -35,4 +35,7 @@
 }
 
 unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+
+int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
+int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len);
 #endif
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index c454a88..f1b0dca 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -563,9 +563,8 @@
 }
 
 /**
- * gadget_is_superspeed() - return true if the hardware handles
- * supperspeed
- * @g: controller that might support supper speed
+ * gadget_is_superspeed() - return true if the hardware handles superspeed
+ * @g: controller that might support superspeed
  */
 static inline int gadget_is_superspeed(struct usb_gadget *g)
 {
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index b9b0f7b4..302ddf5 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -268,6 +268,8 @@
 			struct usb_serial_port *port, struct ktermios *old);
 	void (*break_ctl)(struct tty_struct *tty, int break_state);
 	int  (*chars_in_buffer)(struct tty_struct *tty);
+	void (*wait_until_sent)(struct tty_struct *tty, long timeout);
+	bool (*tx_empty)(struct usb_serial_port *port);
 	void (*throttle)(struct tty_struct *tty);
 	void (*unthrottle)(struct tty_struct *tty);
 	int  (*tiocmget)(struct tty_struct *tty);
@@ -327,6 +329,8 @@
 extern int usb_serial_generic_resume(struct usb_serial *serial);
 extern int usb_serial_generic_write_room(struct tty_struct *tty);
 extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
+extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty,
+								long timeout);
 extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
 extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
 extern void usb_serial_generic_throttle(struct tty_struct *tty);
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index e8d6571..0d33fca 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -36,7 +36,7 @@
 int vc_allocate(unsigned int console);
 int vc_cons_allocated(unsigned int console);
 int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
-void vc_deallocate(unsigned int console);
+struct vc_data *vc_deallocate(unsigned int console);
 void reset_palette(struct vc_data *vc);
 void do_blank_screen(int entering_gfx);
 void do_unblank_screen(int leaving_gfx);
diff --git a/include/linux/wait.h b/include/linux/wait.h
index ac38be2..1133695 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -217,6 +217,8 @@
 		if (!ret)						\
 			break;						\
 	}								\
+	if (!ret && (condition))					\
+		ret = 1;						\
 	finish_wait(&wq, &__wait);					\
 } while (0)
 
@@ -233,8 +235,9 @@
  * wake_up() has to be called after changing any variable that could
  * change the result of the wait condition.
  *
- * The function returns 0 if the @timeout elapsed, and the remaining
- * jiffies if the condition evaluated to true before the timeout elapsed.
+ * The function returns 0 if the @timeout elapsed, or the remaining
+ * jiffies (at least 1) if the @condition evaluated to %true before
+ * the @timeout elapsed.
  */
 #define wait_event_timeout(wq, condition, timeout)			\
 ({									\
@@ -302,6 +305,8 @@
 		ret = -ERESTARTSYS;					\
 		break;							\
 	}								\
+	if (!ret && (condition))					\
+		ret = 1;						\
 	finish_wait(&wq, &__wait);					\
 } while (0)
 
@@ -318,9 +323,10 @@
  * wake_up() has to be called after changing any variable that could
  * change the result of the wait condition.
  *
- * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it
- * was interrupted by a signal, and the remaining jiffies otherwise
- * if the condition evaluated to true before the timeout elapsed.
+ * Returns:
+ * 0 if the @timeout elapsed, -%ERESTARTSYS if it was interrupted by
+ * a signal, or the remaining jiffies (at least 1) if the @condition
+ * evaluated to %true before the @timeout elapsed.
  */
 #define wait_event_interruptible_timeout(wq, condition, timeout)	\
 ({									\
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 04c2d46..885898a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3043,7 +3043,8 @@
  * This function may not be called in IRQ context. Calls to this function
  * for a single hardware must be synchronized against each other. Calls to
  * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be
- * mixed for a single hardware.
+ * mixed for a single hardware. Must not run concurrently with
+ * ieee80211_tx_status() or ieee80211_tx_status_ni().
  *
  * In process context use instead ieee80211_rx_ni().
  *
@@ -3059,7 +3060,8 @@
  * (internally defers to a tasklet.)
  *
  * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not
- * be mixed for a single hardware.
+ * be mixed for a single hardware.Must not run concurrently with
+ * ieee80211_tx_status() or ieee80211_tx_status_ni().
  *
  * @hw: the hardware this frame came in on
  * @skb: the buffer to receive, owned by mac80211 after this call
@@ -3073,7 +3075,8 @@
  * (internally disables bottom halves).
  *
  * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may
- * not be mixed for a single hardware.
+ * not be mixed for a single hardware. Must not run concurrently with
+ * ieee80211_tx_status() or ieee80211_tx_status_ni().
  *
  * @hw: the hardware this frame came in on
  * @skb: the buffer to receive, owned by mac80211 after this call
@@ -3196,7 +3199,8 @@
  * This function may not be called in IRQ context. Calls to this function
  * for a single hardware must be synchronized against each other. Calls
  * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe()
- * may not be mixed for a single hardware.
+ * may not be mixed for a single hardware. Must not run concurrently with
+ * ieee80211_rx() or ieee80211_rx_ni().
  *
  * @hw: the hardware the frame was transmitted by
  * @skb: the frame that was transmitted, owned by mac80211 after this call
diff --git a/include/net/netfilter/nf_log.h b/include/net/netfilter/nf_log.h
index 31f1fb9..99eac12 100644
--- a/include/net/netfilter/nf_log.h
+++ b/include/net/netfilter/nf_log.h
@@ -30,7 +30,8 @@
 	} u;
 };
 
-typedef void nf_logfn(u_int8_t pf,
+typedef void nf_logfn(struct net *net,
+		      u_int8_t pf,
 		      unsigned int hooknum,
 		      const struct sk_buff *skb,
 		      const struct net_device *in,
diff --git a/include/net/netfilter/nfnetlink_log.h b/include/net/netfilter/nfnetlink_log.h
index e2dec42..5ca3f14 100644
--- a/include/net/netfilter/nfnetlink_log.h
+++ b/include/net/netfilter/nfnetlink_log.h
@@ -2,7 +2,8 @@
 #define _KER_NFNETLINK_LOG_H
 
 void
-nfulnl_log_packet(u_int8_t pf,
+nfulnl_log_packet(struct net *net,
+		  u_int8_t pf,
 		  unsigned int hooknum,
 		  const struct sk_buff *skb,
 		  const struct net_device *in,
diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h
index ee13ab6..c312f16 100644
--- a/include/uapi/linux/virtio_console.h
+++ b/include/uapi/linux/virtio_console.h
@@ -39,7 +39,7 @@
 #define VIRTIO_CONSOLE_F_SIZE	0	/* Does host provide console size? */
 #define VIRTIO_CONSOLE_F_MULTIPORT 1	/* Does host provide multiple ports? */
 
-#define VIRTIO_CONSOLE_BAD_ID		(~(u32)0)
+#define VIRTIO_CONSOLE_BAD_ID		(~(__u32)0)
 
 struct virtio_console_config {
 	/* colums of the screens */
diff --git a/ipc/sem.c b/ipc/sem.c
index a7e40ed..70480a3 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -752,19 +752,29 @@
 			int otime, struct list_head *pt)
 {
 	int i;
+	int progress;
 
-	if (sma->complex_count || sops == NULL) {
-		if (update_queue(sma, -1, pt))
+	progress = 1;
+retry_global:
+	if (sma->complex_count) {
+		if (update_queue(sma, -1, pt)) {
+			progress = 1;
 			otime = 1;
+			sops = NULL;
+		}
 	}
+	if (!progress)
+		goto done;
 
 	if (!sops) {
 		/* No semops; something special is going on. */
 		for (i = 0; i < sma->sem_nsems; i++) {
-			if (update_queue(sma, i, pt))
+			if (update_queue(sma, i, pt)) {
 				otime = 1;
+				progress = 1;
+			}
 		}
-		goto done;
+		goto done_checkretry;
 	}
 
 	/* Check the semaphores that were modified. */
@@ -772,8 +782,15 @@
 		if (sops[i].sem_op > 0 ||
 			(sops[i].sem_op < 0 &&
 				sma->sem_base[sops[i].sem_num].semval == 0))
-			if (update_queue(sma, sops[i].sem_num, pt))
+			if (update_queue(sma, sops[i].sem_num, pt)) {
 				otime = 1;
+				progress = 1;
+			}
+	}
+done_checkretry:
+	if (progress) {
+		progress = 0;
+		goto retry_global;
 	}
 done:
 	if (otime)
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 83a2970..6bd4a90 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1021,9 +1021,6 @@
  * @seq: netlink audit message sequence (serial) number
  * @data: payload data
  * @datasz: size of payload data
- * @loginuid: loginuid of sender
- * @sessionid: sessionid for netlink audit message
- * @sid: SE Linux Security ID of sender
  */
 int audit_receive_filter(int type, int pid, int seq, void *data, size_t datasz)
 {
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 7a0cf68..27963e2 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -2072,8 +2072,10 @@
  out_reg:
 	/* Don't let event modules unload while probe registered */
 	ret = try_module_get(file->event_call->mod);
-	if (!ret)
+	if (!ret) {
+		ret = -EBUSY;
 		goto out_free;
+	}
 
 	ret = __ftrace_event_enable_disable(file, 1, 1);
 	if (ret < 0)
diff --git a/lib/Makefile b/lib/Makefile
index e9c52e1..c55a037 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -23,7 +23,7 @@
 
 obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
 	 bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
-	 gcd.o lcm.o list_sort.o uuid.o flex_array.o \
+	 gcd.o lcm.o list_sort.o uuid.o flex_array.o iovec.o \
 	 bsearch.o find_last_bit.o find_next_bit.o llist.o memweight.o kfifo.o
 obj-y += string_helpers.o
 obj-$(CONFIG_TEST_STRING_HELPERS) += test-string_helpers.o
diff --git a/lib/iovec.c b/lib/iovec.c
new file mode 100644
index 0000000..454baa8
--- /dev/null
+++ b/lib/iovec.c
@@ -0,0 +1,53 @@
+#include <linux/uaccess.h>
+#include <linux/export.h>
+#include <linux/uio.h>
+
+/*
+ *	Copy iovec to kernel. Returns -EFAULT on error.
+ *
+ *	Note: this modifies the original iovec.
+ */
+
+int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len)
+{
+	while (len > 0) {
+		if (iov->iov_len) {
+			int copy = min_t(unsigned int, len, iov->iov_len);
+			if (copy_from_user(kdata, iov->iov_base, copy))
+				return -EFAULT;
+			len -= copy;
+			kdata += copy;
+			iov->iov_base += copy;
+			iov->iov_len -= copy;
+		}
+		iov++;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(memcpy_fromiovec);
+
+/*
+ *	Copy kernel to iovec. Returns -EFAULT on error.
+ *
+ *	Note: this modifies the original iovec.
+ */
+
+int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len)
+{
+	while (len > 0) {
+		if (iov->iov_len) {
+			int copy = min_t(unsigned int, iov->iov_len, len);
+			if (copy_to_user(iov->iov_base, kdata, copy))
+				return -EFAULT;
+			kdata += copy;
+			len -= copy;
+			iov->iov_len -= copy;
+			iov->iov_base += copy;
+		}
+		iov++;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(memcpy_toiovec);
diff --git a/lib/klist.c b/lib/klist.c
index 0874e41..358a368a 100644
--- a/lib/klist.c
+++ b/lib/klist.c
@@ -193,10 +193,10 @@
 		if (waiter->node != n)
 			continue;
 
+		list_del(&waiter->list);
 		waiter->woken = 1;
 		mb();
 		wake_up_process(waiter->process);
-		list_del(&waiter->list);
 	}
 	spin_unlock(&klist_remove_lock);
 	knode_set_klist(n, NULL);
diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h
index 095ab15..d411355 100644
--- a/lib/mpi/longlong.h
+++ b/lib/mpi/longlong.h
@@ -318,7 +318,8 @@
 	     "rM" ((USItype)(bh)), \
 	     "rM" ((USItype)(al)), \
 	     "rM" ((USItype)(bl)))
-#if defined(_PA_RISC1_1)
+#if 0 && defined(_PA_RISC1_1)
+/* xmpyu uses floating point register which is not allowed in Linux kernel. */
 #define umul_ppmm(wh, wl, u, v) \
 do { \
 	union {UDItype __ll; \
@@ -337,7 +338,7 @@
 #define UMUL_TIME 40
 #define UDIV_TIME 80
 #endif
-#ifndef LONGLONG_STANDALONE
+#if 0 /* #ifndef LONGLONG_STANDALONE */
 #define udiv_qrnnd(q, r, n1, n0, d) \
 do { USItype __r; \
 	(q) = __udiv_qrnnd(&__r, (n1), (n0), (d)); \
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 03a89a2..362c329 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2325,7 +2325,12 @@
 		pte_unmap(pte);
 		spin_lock(&mm->page_table_lock);
 		BUG_ON(!pmd_none(*pmd));
-		set_pmd_at(mm, address, pmd, _pmd);
+		/*
+		 * We can only use set_pmd_at when establishing
+		 * hugepmds and never for establishing regular pmds that
+		 * points to regular pagetables. Use pmd_populate for that
+		 */
+		pmd_populate(mm, pmd, pmd_pgtable(_pmd));
 		spin_unlock(&mm->page_table_lock);
 		anon_vma_unlock_write(vma->anon_vma);
 		goto out;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index cb1c9de..010d6c1 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -4108,8 +4108,6 @@
 	if (mem_cgroup_disabled())
 		return NULL;
 
-	VM_BUG_ON(PageSwapCache(page));
-
 	if (PageTransHuge(page)) {
 		nr_pages <<= compound_order(page);
 		VM_BUG_ON(!PageTransHuge(page));
@@ -4205,6 +4203,18 @@
 	if (page_mapped(page))
 		return;
 	VM_BUG_ON(page->mapping && !PageAnon(page));
+	/*
+	 * If the page is in swap cache, uncharge should be deferred
+	 * to the swap path, which also properly accounts swap usage
+	 * and handles memcg lifetime.
+	 *
+	 * Note that this check is not stable and reclaim may add the
+	 * page to swap cache at any time after this.  However, if the
+	 * page is not in swap cache by the time page->mapcount hits
+	 * 0, there won't be any page table references to the swap
+	 * slot, and reclaim will free it and not actually write the
+	 * page to disk.
+	 */
 	if (PageSwapCache(page))
 		return;
 	__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_ANON, false);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index a221fac..1ad92b4 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -720,9 +720,12 @@
 	start = phys_start_pfn << PAGE_SHIFT;
 	size = nr_pages * PAGE_SIZE;
 	ret = release_mem_region_adjustable(&iomem_resource, start, size);
-	if (ret)
-		pr_warn("Unable to release resource <%016llx-%016llx> (%d)\n",
-				start, start + size - 1, ret);
+	if (ret) {
+		resource_size_t endres = start + size - 1;
+
+		pr_warn("Unable to release resource <%pa-%pa> (%d)\n",
+				&start, &endres, ret);
+	}
 
 	sections_to_remove = nr_pages / PAGES_PER_SECTION;
 	for (i = 0; i < sections_to_remove; i++) {
diff --git a/mm/migrate.c b/mm/migrate.c
index 27ed225..b1f5750 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -165,7 +165,7 @@
 		pte = arch_make_huge_pte(pte, vma, new, 0);
 	}
 #endif
-	flush_cache_page(vma, addr, pte_pfn(pte));
+	flush_dcache_page(new);
 	set_pte_at(mm, addr, ptep, pte);
 
 	if (PageHuge(new)) {
diff --git a/mm/mmu_notifier.c b/mm/mmu_notifier.c
index be04122..6725ff1 100644
--- a/mm/mmu_notifier.c
+++ b/mm/mmu_notifier.c
@@ -40,48 +40,44 @@
 	int id;
 
 	/*
-	 * srcu_read_lock() here will block synchronize_srcu() in
-	 * mmu_notifier_unregister() until all registered
-	 * ->release() callouts this function makes have
-	 * returned.
+	 * SRCU here will block mmu_notifier_unregister until
+	 * ->release returns.
 	 */
 	id = srcu_read_lock(&srcu);
+	hlist_for_each_entry_rcu(mn, &mm->mmu_notifier_mm->list, hlist)
+		/*
+		 * If ->release runs before mmu_notifier_unregister it must be
+		 * handled, as it's the only way for the driver to flush all
+		 * existing sptes and stop the driver from establishing any more
+		 * sptes before all the pages in the mm are freed.
+		 */
+		if (mn->ops->release)
+			mn->ops->release(mn, mm);
+	srcu_read_unlock(&srcu, id);
+
 	spin_lock(&mm->mmu_notifier_mm->lock);
 	while (unlikely(!hlist_empty(&mm->mmu_notifier_mm->list))) {
 		mn = hlist_entry(mm->mmu_notifier_mm->list.first,
 				 struct mmu_notifier,
 				 hlist);
-
 		/*
-		 * Unlink.  This will prevent mmu_notifier_unregister()
-		 * from also making the ->release() callout.
+		 * We arrived before mmu_notifier_unregister so
+		 * mmu_notifier_unregister will do nothing other than to wait
+		 * for ->release to finish and for mmu_notifier_unregister to
+		 * return.
 		 */
 		hlist_del_init_rcu(&mn->hlist);
-		spin_unlock(&mm->mmu_notifier_mm->lock);
-
-		/*
-		 * Clear sptes. (see 'release' description in mmu_notifier.h)
-		 */
-		if (mn->ops->release)
-			mn->ops->release(mn, mm);
-
-		spin_lock(&mm->mmu_notifier_mm->lock);
 	}
 	spin_unlock(&mm->mmu_notifier_mm->lock);
 
 	/*
-	 * All callouts to ->release() which we have done are complete.
-	 * Allow synchronize_srcu() in mmu_notifier_unregister() to complete
-	 */
-	srcu_read_unlock(&srcu, id);
-
-	/*
-	 * mmu_notifier_unregister() may have unlinked a notifier and may
-	 * still be calling out to it.	Additionally, other notifiers
-	 * may have been active via vmtruncate() et. al. Block here
-	 * to ensure that all notifier callouts for this mm have been
-	 * completed and the sptes are really cleaned up before returning
-	 * to exit_mmap().
+	 * synchronize_srcu here prevents mmu_notifier_release from returning to
+	 * exit_mmap (which would proceed with freeing all pages in the mm)
+	 * until the ->release method returns, if it was invoked by
+	 * mmu_notifier_unregister.
+	 *
+	 * The mmu_notifier_mm can't go away from under us because one mm_count
+	 * is held by exit_mmap.
 	 */
 	synchronize_srcu(&srcu);
 }
@@ -292,31 +288,34 @@
 {
 	BUG_ON(atomic_read(&mm->mm_count) <= 0);
 
-	spin_lock(&mm->mmu_notifier_mm->lock);
 	if (!hlist_unhashed(&mn->hlist)) {
+		/*
+		 * SRCU here will force exit_mmap to wait for ->release to
+		 * finish before freeing the pages.
+		 */
 		int id;
 
-		/*
-		 * Ensure we synchronize up with __mmu_notifier_release().
-		 */
 		id = srcu_read_lock(&srcu);
-
-		hlist_del_rcu(&mn->hlist);
-		spin_unlock(&mm->mmu_notifier_mm->lock);
-
+		/*
+		 * exit_mmap will block in mmu_notifier_release to guarantee
+		 * that ->release is called before freeing the pages.
+		 */
 		if (mn->ops->release)
 			mn->ops->release(mn, mm);
-
-		/*
-		 * Allow __mmu_notifier_release() to complete.
-		 */
 		srcu_read_unlock(&srcu, id);
-	} else
+
+		spin_lock(&mm->mmu_notifier_mm->lock);
+		/*
+		 * Can not use list_del_rcu() since __mmu_notifier_release
+		 * can delete it before we hold the lock.
+		 */
+		hlist_del_init_rcu(&mn->hlist);
 		spin_unlock(&mm->mmu_notifier_mm->lock);
+	}
 
 	/*
-	 * Wait for any running method to finish, including ->release() if it
-	 * was run by __mmu_notifier_release() instead of us.
+	 * Wait for any running method to finish, of course including
+	 * ->release if it was run by mmu_notifier_relase instead of us.
 	 */
 	synchronize_srcu(&srcu);
 
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 98cbdf6..378a15b 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5158,7 +5158,7 @@
 	for (pages = 0; pos < end; pos += PAGE_SIZE, pages++) {
 		if (poison)
 			memset((void *)pos, poison, PAGE_SIZE);
-		free_reserved_page(virt_to_page(pos));
+		free_reserved_page(virt_to_page((void *)pos));
 	}
 
 	if (pages && s)
diff --git a/mm/pagewalk.c b/mm/pagewalk.c
index 35aa294..5da2cbc 100644
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -127,28 +127,7 @@
 	return 0;
 }
 
-static struct vm_area_struct* hugetlb_vma(unsigned long addr, struct mm_walk *walk)
-{
-	struct vm_area_struct *vma;
-
-	/* We don't need vma lookup at all. */
-	if (!walk->hugetlb_entry)
-		return NULL;
-
-	VM_BUG_ON(!rwsem_is_locked(&walk->mm->mmap_sem));
-	vma = find_vma(walk->mm, addr);
-	if (vma && vma->vm_start <= addr && is_vm_hugetlb_page(vma))
-		return vma;
-
-	return NULL;
-}
-
 #else /* CONFIG_HUGETLB_PAGE */
-static struct vm_area_struct* hugetlb_vma(unsigned long addr, struct mm_walk *walk)
-{
-	return NULL;
-}
-
 static int walk_hugetlb_range(struct vm_area_struct *vma,
 			      unsigned long addr, unsigned long end,
 			      struct mm_walk *walk)
@@ -198,30 +177,53 @@
 	if (!walk->mm)
 		return -EINVAL;
 
+	VM_BUG_ON(!rwsem_is_locked(&walk->mm->mmap_sem));
+
 	pgd = pgd_offset(walk->mm, addr);
 	do {
-		struct vm_area_struct *vma;
+		struct vm_area_struct *vma = NULL;
 
 		next = pgd_addr_end(addr, end);
 
 		/*
-		 * handle hugetlb vma individually because pagetable walk for
-		 * the hugetlb page is dependent on the architecture and
-		 * we can't handled it in the same manner as non-huge pages.
+		 * This function was not intended to be vma based.
+		 * But there are vma special cases to be handled:
+		 * - hugetlb vma's
+		 * - VM_PFNMAP vma's
 		 */
-		vma = hugetlb_vma(addr, walk);
+		vma = find_vma(walk->mm, addr);
 		if (vma) {
-			if (vma->vm_end < next)
-				next = vma->vm_end;
 			/*
-			 * Hugepage is very tightly coupled with vma, so
-			 * walk through hugetlb entries within a given vma.
+			 * There are no page structures backing a VM_PFNMAP
+			 * range, so do not allow split_huge_page_pmd().
 			 */
-			err = walk_hugetlb_range(vma, addr, next, walk);
-			if (err)
-				break;
-			pgd = pgd_offset(walk->mm, next);
-			continue;
+			if ((vma->vm_start <= addr) &&
+			    (vma->vm_flags & VM_PFNMAP)) {
+				next = vma->vm_end;
+				pgd = pgd_offset(walk->mm, next);
+				continue;
+			}
+			/*
+			 * Handle hugetlb vma individually because pagetable
+			 * walk for the hugetlb page is dependent on the
+			 * architecture and we can't handled it in the same
+			 * manner as non-huge pages.
+			 */
+			if (walk->hugetlb_entry && (vma->vm_start <= addr) &&
+			    is_vm_hugetlb_page(vma)) {
+				if (vma->vm_end < next)
+					next = vma->vm_end;
+				/*
+				 * Hugepage is very tightly coupled with vma,
+				 * so walk through hugetlb entries within a
+				 * given vma.
+				 */
+				err = walk_hugetlb_range(vma, addr, next, walk);
+				if (err)
+					break;
+				pgd = pgd_offset(walk->mm, next);
+				continue;
+			}
 		}
 
 		if (pgd_none_or_clear_bad(pgd)) {
diff --git a/net/802/mrp.c b/net/802/mrp.c
index e085bcc..1eb05d8 100644
--- a/net/802/mrp.c
+++ b/net/802/mrp.c
@@ -871,10 +871,10 @@
 	 */
 	del_timer_sync(&app->join_timer);
 
-	spin_lock(&app->lock);
+	spin_lock_bh(&app->lock);
 	mrp_mad_event(app, MRP_EVENT_TX);
 	mrp_pdu_queue(app);
-	spin_unlock(&app->lock);
+	spin_unlock_bh(&app->lock);
 
 	mrp_queue_xmit(app);
 
diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c
index 1240f07..51aafd6 100644
--- a/net/batman-adv/main.c
+++ b/net/batman-adv/main.c
@@ -181,6 +181,7 @@
 	batadv_originator_free(bat_priv);
 
 	free_percpu(bat_priv->bat_counters);
+	bat_priv->bat_counters = NULL;
 
 	atomic_set(&bat_priv->mesh_state, BATADV_MESH_INACTIVE);
 }
diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c
index 2f34525..fad1a20 100644
--- a/net/batman-adv/originator.c
+++ b/net/batman-adv/originator.c
@@ -156,12 +156,28 @@
 	kfree(orig_node);
 }
 
+/**
+ * batadv_orig_node_free_ref - decrement the orig node refcounter and possibly
+ * schedule an rcu callback for freeing it
+ * @orig_node: the orig node to free
+ */
 void batadv_orig_node_free_ref(struct batadv_orig_node *orig_node)
 {
 	if (atomic_dec_and_test(&orig_node->refcount))
 		call_rcu(&orig_node->rcu, batadv_orig_node_free_rcu);
 }
 
+/**
+ * batadv_orig_node_free_ref_now - decrement the orig node refcounter and
+ * possibly free it (without rcu callback)
+ * @orig_node: the orig node to free
+ */
+void batadv_orig_node_free_ref_now(struct batadv_orig_node *orig_node)
+{
+	if (atomic_dec_and_test(&orig_node->refcount))
+		batadv_orig_node_free_rcu(&orig_node->rcu);
+}
+
 void batadv_originator_free(struct batadv_priv *bat_priv)
 {
 	struct batadv_hashtable *hash = bat_priv->orig_hash;
diff --git a/net/batman-adv/originator.h b/net/batman-adv/originator.h
index 7df48fa..734e5a3 100644
--- a/net/batman-adv/originator.h
+++ b/net/batman-adv/originator.h
@@ -26,6 +26,7 @@
 void batadv_originator_free(struct batadv_priv *bat_priv);
 void batadv_purge_orig_ref(struct batadv_priv *bat_priv);
 void batadv_orig_node_free_ref(struct batadv_orig_node *orig_node);
+void batadv_orig_node_free_ref_now(struct batadv_orig_node *orig_node);
 struct batadv_orig_node *batadv_get_orig_node(struct batadv_priv *bat_priv,
 					      const uint8_t *addr);
 struct batadv_neigh_node *
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index 6f20d33..819dfb0 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -505,6 +505,7 @@
 	batadv_debugfs_del_meshif(dev);
 free_bat_counters:
 	free_percpu(bat_priv->bat_counters);
+	bat_priv->bat_counters = NULL;
 
 	return ret;
 }
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 5e89dee..9e87485 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -144,7 +144,12 @@
 	struct batadv_tt_orig_list_entry *orig_entry;
 
 	orig_entry = container_of(rcu, struct batadv_tt_orig_list_entry, rcu);
-	batadv_orig_node_free_ref(orig_entry->orig_node);
+
+	/* We are in an rcu callback here, therefore we cannot use
+	 * batadv_orig_node_free_ref() and its call_rcu():
+	 * An rcu_barrier() wouldn't wait for that to finish
+	 */
+	batadv_orig_node_free_ref_now(orig_entry->orig_node);
 	kfree(orig_entry);
 }
 
diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c
index 9878eb8..19c37a4 100644
--- a/net/bridge/netfilter/ebt_log.c
+++ b/net/bridge/netfilter/ebt_log.c
@@ -72,13 +72,12 @@
 }
 
 static void
-ebt_log_packet(u_int8_t pf, unsigned int hooknum,
-   const struct sk_buff *skb, const struct net_device *in,
-   const struct net_device *out, const struct nf_loginfo *loginfo,
-   const char *prefix)
+ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum,
+	       const struct sk_buff *skb, const struct net_device *in,
+	       const struct net_device *out, const struct nf_loginfo *loginfo,
+	       const char *prefix)
 {
 	unsigned int bitmask;
-	struct net *net = dev_net(in ? in : out);
 
 	/* FIXME: Disabled from containers until syslog ns is supported */
 	if (!net_eq(net, &init_net))
@@ -191,7 +190,7 @@
 		nf_log_packet(net, NFPROTO_BRIDGE, par->hooknum, skb,
 			      par->in, par->out, &li, "%s", info->prefix);
 	else
-		ebt_log_packet(NFPROTO_BRIDGE, par->hooknum, skb, par->in,
+		ebt_log_packet(net, NFPROTO_BRIDGE, par->hooknum, skb, par->in,
 			       par->out, &li, info->prefix);
 	return EBT_CONTINUE;
 }
diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c
index fc1905c..df0364a 100644
--- a/net/bridge/netfilter/ebt_ulog.c
+++ b/net/bridge/netfilter/ebt_ulog.c
@@ -131,14 +131,16 @@
 	return skb;
 }
 
-static void ebt_ulog_packet(unsigned int hooknr, const struct sk_buff *skb,
-   const struct net_device *in, const struct net_device *out,
-   const struct ebt_ulog_info *uloginfo, const char *prefix)
+static void ebt_ulog_packet(struct net *net, unsigned int hooknr,
+			    const struct sk_buff *skb,
+			    const struct net_device *in,
+			    const struct net_device *out,
+			    const struct ebt_ulog_info *uloginfo,
+			    const char *prefix)
 {
 	ebt_ulog_packet_msg_t *pm;
 	size_t size, copy_len;
 	struct nlmsghdr *nlh;
-	struct net *net = dev_net(in ? in : out);
 	struct ebt_ulog_net *ebt = ebt_ulog_pernet(net);
 	unsigned int group = uloginfo->nlgroup;
 	ebt_ulog_buff_t *ub = &ebt->ulog_buffers[group];
@@ -233,7 +235,7 @@
 }
 
 /* this function is registered with the netfilter core */
-static void ebt_log_packet(u_int8_t pf, unsigned int hooknum,
+static void ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum,
    const struct sk_buff *skb, const struct net_device *in,
    const struct net_device *out, const struct nf_loginfo *li,
    const char *prefix)
@@ -252,13 +254,15 @@
 		strlcpy(loginfo.prefix, prefix, sizeof(loginfo.prefix));
 	}
 
-	ebt_ulog_packet(hooknum, skb, in, out, &loginfo, prefix);
+	ebt_ulog_packet(net, hooknum, skb, in, out, &loginfo, prefix);
 }
 
 static unsigned int
 ebt_ulog_tg(struct sk_buff *skb, const struct xt_action_param *par)
 {
-	ebt_ulog_packet(par->hooknum, skb, par->in, par->out,
+	struct net *net = dev_net(par->in ? par->in : par->out);
+
+	ebt_ulog_packet(net, par->hooknum, skb, par->in, par->out,
 	                par->targinfo, NULL);
 	return EBT_CONTINUE;
 }
diff --git a/net/core/iovec.c b/net/core/iovec.c
index 7e7aeb0..de178e4 100644
--- a/net/core/iovec.c
+++ b/net/core/iovec.c
@@ -75,31 +75,6 @@
 
 /*
  *	Copy kernel to iovec. Returns -EFAULT on error.
- *
- *	Note: this modifies the original iovec.
- */
-
-int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len)
-{
-	while (len > 0) {
-		if (iov->iov_len) {
-			int copy = min_t(unsigned int, iov->iov_len, len);
-			if (copy_to_user(iov->iov_base, kdata, copy))
-				return -EFAULT;
-			kdata += copy;
-			len -= copy;
-			iov->iov_len -= copy;
-			iov->iov_base += copy;
-		}
-		iov++;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(memcpy_toiovec);
-
-/*
- *	Copy kernel to iovec. Returns -EFAULT on error.
  */
 
 int memcpy_toiovecend(const struct iovec *iov, unsigned char *kdata,
@@ -125,31 +100,6 @@
 EXPORT_SYMBOL(memcpy_toiovecend);
 
 /*
- *	Copy iovec to kernel. Returns -EFAULT on error.
- *
- *	Note: this modifies the original iovec.
- */
-
-int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len)
-{
-	while (len > 0) {
-		if (iov->iov_len) {
-			int copy = min_t(unsigned int, len, iov->iov_len);
-			if (copy_from_user(kdata, iov->iov_base, copy))
-				return -EFAULT;
-			len -= copy;
-			kdata += copy;
-			iov->iov_base += copy;
-			iov->iov_len -= copy;
-		}
-		iov++;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(memcpy_fromiovec);
-
-/*
  *	Copy iovec from kernel. Returns -EFAULT on error.
  */
 
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index c625e4d..2a83591 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -235,7 +235,7 @@
 	   */
 	struct net *net = dev_net(skb->dev);
 	struct ip_tunnel_net *itn;
-	const struct iphdr *iph = (const struct iphdr *)skb->data;
+	const struct iphdr *iph;
 	const int type = icmp_hdr(skb)->type;
 	const int code = icmp_hdr(skb)->code;
 	struct ip_tunnel *t;
@@ -281,6 +281,7 @@
 	else
 		itn = net_generic(net, ipgre_net_id);
 
+	iph = (const struct iphdr *)skb->data;
 	t = ip_tunnel_lookup(itn, skb->dev->ifindex, tpi.flags,
 			     iph->daddr, iph->saddr, tpi.key);
 
diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c
index f8a222cb..cf08218 100644
--- a/net/ipv4/netfilter/ipt_ULOG.c
+++ b/net/ipv4/netfilter/ipt_ULOG.c
@@ -162,7 +162,8 @@
 	return skb;
 }
 
-static void ipt_ulog_packet(unsigned int hooknum,
+static void ipt_ulog_packet(struct net *net,
+			    unsigned int hooknum,
 			    const struct sk_buff *skb,
 			    const struct net_device *in,
 			    const struct net_device *out,
@@ -174,7 +175,6 @@
 	size_t size, copy_len;
 	struct nlmsghdr *nlh;
 	struct timeval tv;
-	struct net *net = dev_net(in ? in : out);
 	struct ulog_net *ulog = ulog_pernet(net);
 
 	/* ffs == find first bit set, necessary because userspace
@@ -291,12 +291,15 @@
 static unsigned int
 ulog_tg(struct sk_buff *skb, const struct xt_action_param *par)
 {
-	ipt_ulog_packet(par->hooknum, skb, par->in, par->out,
+	struct net *net = dev_net(par->in ? par->in : par->out);
+
+	ipt_ulog_packet(net, par->hooknum, skb, par->in, par->out,
 	                par->targinfo, NULL);
 	return XT_CONTINUE;
 }
 
-static void ipt_logfn(u_int8_t pf,
+static void ipt_logfn(struct net *net,
+		      u_int8_t pf,
 		      unsigned int hooknum,
 		      const struct sk_buff *skb,
 		      const struct net_device *in,
@@ -318,7 +321,7 @@
 		strlcpy(loginfo.prefix, prefix, sizeof(loginfo.prefix));
 	}
 
-	ipt_ulog_packet(hooknum, skb, in, out, &loginfo, prefix);
+	ipt_ulog_packet(net, hooknum, skb, in, out, &loginfo, prefix);
 }
 
 static int ulog_tg_check(const struct xt_tgchk_param *par)
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index dcb116d..ab450c0 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2887,6 +2887,7 @@
 	unsigned int mss;
 	struct sk_buff *gso_skb = skb;
 	__sum16 newcheck;
+	bool ooo_okay, copy_destructor;
 
 	if (!pskb_may_pull(skb, sizeof(*th)))
 		goto out;
@@ -2927,10 +2928,18 @@
 		goto out;
 	}
 
+	copy_destructor = gso_skb->destructor == tcp_wfree;
+	ooo_okay = gso_skb->ooo_okay;
+	/* All segments but the first should have ooo_okay cleared */
+	skb->ooo_okay = 0;
+
 	segs = skb_segment(skb, features);
 	if (IS_ERR(segs))
 		goto out;
 
+	/* Only first segment might have ooo_okay set */
+	segs->ooo_okay = ooo_okay;
+
 	delta = htonl(oldlen + (thlen + mss));
 
 	skb = segs;
@@ -2950,6 +2959,17 @@
 						    thlen, skb->csum));
 
 		seq += mss;
+		if (copy_destructor) {
+			skb->destructor = gso_skb->destructor;
+			skb->sk = gso_skb->sk;
+			/* {tcp|sock}_wfree() use exact truesize accounting :
+			 * sum(skb->truesize) MUST be exactly be gso_skb->truesize
+			 * So we account mss bytes of 'true size' for each segment.
+			 * The last segment will contain the remaining.
+			 */
+			skb->truesize = mss;
+			gso_skb->truesize -= mss;
+		}
 		skb = skb->next;
 		th = tcp_hdr(skb);
 
@@ -2962,7 +2982,7 @@
 	 * is freed at TX completion, and not right now when gso_skb
 	 * is freed by GSO engine
 	 */
-	if (gso_skb->destructor == tcp_wfree) {
+	if (copy_destructor) {
 		swap(gso_skb->sk, skb->sk);
 		swap(gso_skb->destructor, skb->destructor);
 		swap(gso_skb->truesize, skb->truesize);
@@ -3269,8 +3289,11 @@
 
 	for (i = 0; i < shi->nr_frags; ++i) {
 		const struct skb_frag_struct *f = &shi->frags[i];
-		struct page *page = skb_frag_page(f);
-		sg_set_page(&sg, page, skb_frag_size(f), f->page_offset);
+		unsigned int offset = f->page_offset;
+		struct page *page = skb_frag_page(f) + (offset >> PAGE_SHIFT);
+
+		sg_set_page(&sg, page, skb_frag_size(f),
+			    offset_in_page(offset));
 		if (crypto_hash_update(desc, &sg, skb_frag_size(f)))
 			return 1;
 	}
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 08bbe60..9c62257 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2743,8 +2743,8 @@
  * tcp_xmit_retransmit_queue().
  */
 static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked,
-				  int prior_sacked, bool is_dupack,
-				  int flag)
+				  int prior_sacked, int prior_packets,
+				  bool is_dupack, int flag)
 {
 	struct inet_connection_sock *icsk = inet_csk(sk);
 	struct tcp_sock *tp = tcp_sk(sk);
@@ -2804,7 +2804,8 @@
 				tcp_add_reno_sack(sk);
 		} else
 			do_lost = tcp_try_undo_partial(sk, pkts_acked);
-		newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked;
+		newly_acked_sacked = prior_packets - tp->packets_out +
+				     tp->sacked_out - prior_sacked;
 		break;
 	case TCP_CA_Loss:
 		tcp_process_loss(sk, flag, is_dupack);
@@ -2818,7 +2819,8 @@
 			if (is_dupack)
 				tcp_add_reno_sack(sk);
 		}
-		newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked;
+		newly_acked_sacked = prior_packets - tp->packets_out +
+				     tp->sacked_out - prior_sacked;
 
 		if (icsk->icsk_ca_state <= TCP_CA_Disorder)
 			tcp_try_undo_dsack(sk);
@@ -3330,9 +3332,10 @@
 	bool is_dupack = false;
 	u32 prior_in_flight;
 	u32 prior_fackets;
-	int prior_packets;
+	int prior_packets = tp->packets_out;
 	int prior_sacked = tp->sacked_out;
 	int pkts_acked = 0;
+	int previous_packets_out = 0;
 
 	/* If the ack is older than previous acks
 	 * then we can probably ignore it.
@@ -3403,14 +3406,14 @@
 	sk->sk_err_soft = 0;
 	icsk->icsk_probes_out = 0;
 	tp->rcv_tstamp = tcp_time_stamp;
-	prior_packets = tp->packets_out;
 	if (!prior_packets)
 		goto no_queue;
 
 	/* See if we can take anything off of the retransmit queue. */
+	previous_packets_out = tp->packets_out;
 	flag |= tcp_clean_rtx_queue(sk, prior_fackets, prior_snd_una);
 
-	pkts_acked = prior_packets - tp->packets_out;
+	pkts_acked = previous_packets_out - tp->packets_out;
 
 	if (tcp_ack_is_dubious(sk, flag)) {
 		/* Advance CWND, if state allows this. */
@@ -3418,7 +3421,7 @@
 			tcp_cong_avoid(sk, ack, prior_in_flight);
 		is_dupack = !(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP));
 		tcp_fastretrans_alert(sk, pkts_acked, prior_sacked,
-				      is_dupack, flag);
+				      prior_packets, is_dupack, flag);
 	} else {
 		if (flag & FLAG_DATA_ACKED)
 			tcp_cong_avoid(sk, ack, prior_in_flight);
@@ -3441,7 +3444,7 @@
 	/* If data was DSACKed, see if we can undo a cwnd reduction. */
 	if (flag & FLAG_DSACKING_ACK)
 		tcp_fastretrans_alert(sk, pkts_acked, prior_sacked,
-				      is_dupack, flag);
+				      prior_packets, is_dupack, flag);
 	/* If this ack opens up a zero window, clear backoff.  It was
 	 * being used to time the probes, and is probably far higher than
 	 * it needs to be for normal retransmission.
@@ -3464,7 +3467,7 @@
 	if (TCP_SKB_CB(skb)->sacked) {
 		flag |= tcp_sacktag_write_queue(sk, skb, prior_snd_una);
 		tcp_fastretrans_alert(sk, pkts_acked, prior_sacked,
-				      is_dupack, flag);
+				      prior_packets, is_dupack, flag);
 	}
 
 	SOCK_DEBUG(sk, "Ack %u before %u:%u\n", ack, tp->snd_una, tp->snd_nxt);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 536d409..ec335fa 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -874,11 +874,13 @@
 							   &md5);
 	tcp_header_size = tcp_options_size + sizeof(struct tcphdr);
 
-	if (tcp_packets_in_flight(tp) == 0) {
+	if (tcp_packets_in_flight(tp) == 0)
 		tcp_ca_event(sk, CA_EVENT_TX_START);
-		skb->ooo_okay = 1;
-	} else
-		skb->ooo_okay = 0;
+
+	/* if no packet is in qdisc/device queue, then allow XPS to select
+	 * another queue.
+	 */
+	skb->ooo_okay = sk_wmem_alloc_get(sk) == 0;
 
 	skb_push(skb, tcp_header_size);
 	skb_reset_transport_header(skb);
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index d2eedf1..dae1949 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1147,7 +1147,7 @@
 			if (WARN_ON(np->cork.opt))
 				return -EINVAL;
 
-			np->cork.opt = kmalloc(opt->tot_len, sk->sk_allocation);
+			np->cork.opt = kzalloc(opt->tot_len, sk->sk_allocation);
 			if (unlikely(np->cork.opt == NULL))
 				return -ENOBUFS;
 
diff --git a/net/irda/irlap_frame.c b/net/irda/irlap_frame.c
index 8c00416..9ea0c93 100644
--- a/net/irda/irlap_frame.c
+++ b/net/irda/irlap_frame.c
@@ -544,7 +544,7 @@
 		/*
 		 *  We now have some discovery info to deliver!
 		 */
-		discovery = kmalloc(sizeof(discovery_t), GFP_ATOMIC);
+		discovery = kzalloc(sizeof(discovery_t), GFP_ATOMIC);
 		if (!discovery) {
 			IRDA_WARNING("%s: unable to malloc!\n", __func__);
 			return;
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 158e6eb..44be28c 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1267,6 +1267,7 @@
 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata);
 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
 				  __le16 fc, bool acked);
+void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata);
 
 /* IBSS code */
 void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 29620bfc..a46e490 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1015,7 +1015,8 @@
 
 static void
 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
-				 u64 timestamp, struct ieee802_11_elems *elems)
+				 u64 timestamp, struct ieee802_11_elems *elems,
+				 bool beacon)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -1032,6 +1033,7 @@
 	struct cfg80211_chan_def new_vht_chandef = {};
 	const struct ieee80211_sec_chan_offs_ie *sec_chan_offs;
 	const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie;
+	const struct ieee80211_ht_operation *ht_oper;
 	int secondary_channel_offset = -1;
 
 	ASSERT_MGD_MTX(ifmgd);
@@ -1048,11 +1050,14 @@
 
 	sec_chan_offs = elems->sec_chan_offs;
 	wide_bw_chansw_ie = elems->wide_bw_chansw_ie;
+	ht_oper = elems->ht_operation;
 
 	if (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
 			    IEEE80211_STA_DISABLE_40MHZ)) {
 		sec_chan_offs = NULL;
 		wide_bw_chansw_ie = NULL;
+		/* only used for bandwidth here */
+		ht_oper = NULL;
 	}
 
 	if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
@@ -1094,10 +1099,20 @@
 		return;
 	}
 
-	if (sec_chan_offs) {
+	if (!beacon && sec_chan_offs) {
 		secondary_channel_offset = sec_chan_offs->sec_chan_offs;
+	} else if (beacon && ht_oper) {
+		secondary_channel_offset =
+			ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
 	} else if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
-		/* if HT is enabled and the IE not present, it's still HT */
+		/*
+		 * If it's not a beacon, HT is enabled and the IE not present,
+		 * it's 20 MHz, 802.11-2012 8.5.2.6:
+		 *	This element [the Secondary Channel Offset Element] is
+		 *	present when switching to a 40 MHz channel. It may be
+		 *	present when switching to a 20 MHz channel (in which
+		 *	case the secondary channel offset is set to SCN).
+		 */
 		secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
 	}
 
@@ -2796,7 +2811,8 @@
 		mutex_unlock(&local->iflist_mtx);
 	}
 
-	ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, elems);
+	ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
+					 elems, true);
 
 }
 
@@ -3210,7 +3226,7 @@
 
 			ieee80211_sta_process_chanswitch(sdata,
 							 rx_status->mactime,
-							 &elems);
+							 &elems, false);
 		} else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
 			ies_len = skb->len -
 				  offsetof(struct ieee80211_mgmt,
@@ -3232,7 +3248,7 @@
 
 			ieee80211_sta_process_chanswitch(sdata,
 							 rx_status->mactime,
-							 &elems);
+							 &elems, false);
 		}
 		break;
 	}
@@ -3623,6 +3639,31 @@
 	}
 }
 
+#ifdef CONFIG_PM
+void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	mutex_lock(&ifmgd->mtx);
+	if (!ifmgd->associated) {
+		mutex_unlock(&ifmgd->mtx);
+		return;
+	}
+
+	if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
+		sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
+		mlme_dbg(sdata, "driver requested disconnect after resume\n");
+		ieee80211_sta_connection_lost(sdata,
+					      ifmgd->associated->bssid,
+					      WLAN_REASON_UNSPECIFIED,
+					      true);
+		mutex_unlock(&ifmgd->mtx);
+		return;
+	}
+	mutex_unlock(&ifmgd->mtx);
+}
+#endif
+
 /* interface setup */
 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
 {
@@ -4329,7 +4370,7 @@
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
 	bool tx = !req->local_state_change;
-	bool sent_frame = false;
+	bool report_frame = false;
 
 	mutex_lock(&ifmgd->mtx);
 
@@ -4346,7 +4387,7 @@
 		ieee80211_destroy_auth_data(sdata, false);
 		mutex_unlock(&ifmgd->mtx);
 
-		sent_frame = tx;
+		report_frame = true;
 		goto out;
 	}
 
@@ -4354,12 +4395,12 @@
 	    ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
 		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
 				       req->reason_code, tx, frame_buf);
-		sent_frame = tx;
+		report_frame = true;
 	}
 	mutex_unlock(&ifmgd->mtx);
 
  out:
-	if (sent_frame)
+	if (report_frame)
 		__cfg80211_send_deauth(sdata->dev, frame_buf,
 				       IEEE80211_DEAUTH_FRAME_LEN);
 
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index 0d51877..d3f414f 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -688,8 +688,15 @@
 			   struct ieee80211_sta *pubsta,
 			   struct ieee80211_sta_rates *rates)
 {
-	struct ieee80211_sta_rates *old = rcu_dereference(pubsta->rates);
+	struct ieee80211_sta_rates *old;
 
+	/*
+	 * mac80211 guarantees that this function will not be called
+	 * concurrently, so the following RCU access is safe, even without
+	 * extra locking. This can not be checked easily, so we just set
+	 * the condition to true.
+	 */
+	old = rcu_dereference_protected(pubsta->rates, true);
 	rcu_assign_pointer(pubsta->rates, rates);
 	if (old)
 		kfree_rcu(old, rcu_head);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index c8447af..8e29526 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3036,6 +3036,9 @@
 			 * and location updates. Note that mac80211
 			 * itself never looks at these frames.
 			 */
+			if (!multicast &&
+			    !ether_addr_equal(sdata->vif.addr, hdr->addr1))
+				return 0;
 			if (ieee80211_is_public_action(hdr, skb->len))
 				return 1;
 			if (!ieee80211_is_beacon(hdr->frame_control))
diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c
index 3ed801d..124b1fd 100644
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
@@ -208,10 +208,10 @@
 	u32 iv32 = get_unaligned_le32(&data[4]);
 	u16 iv16 = data[2] | (data[0] << 8);
 
-	spin_lock_bh(&key->u.tkip.txlock);
+	spin_lock(&key->u.tkip.txlock);
 	ieee80211_compute_tkip_p1k(key, iv32);
 	tkip_mixing_phase2(tk, ctx, iv16, p2k);
-	spin_unlock_bh(&key->u.tkip.txlock);
+	spin_unlock(&key->u.tkip.txlock);
 }
 EXPORT_SYMBOL(ieee80211_get_tkip_p2k);
 
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 3f87fa4..27e0715 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1740,6 +1740,13 @@
 	mb();
 	local->resuming = false;
 
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!ieee80211_sdata_running(sdata))
+			continue;
+		if (sdata->vif.type == NL80211_IFTYPE_STATION)
+			ieee80211_sta_restart(sdata);
+	}
+
 	mod_timer(&local->sta_cleanup, jiffies + 1);
 #else
 	WARN_ON(1);
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index 388656d..3b18dd1 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -148,7 +148,7 @@
 		va_start(args, fmt);
 		vsnprintf(prefix, sizeof(prefix), fmt, args);
 		va_end(args);
-		logger->logfn(pf, hooknum, skb, in, out, loginfo, prefix);
+		logger->logfn(net, pf, hooknum, skb, in, out, loginfo, prefix);
 	}
 	rcu_read_unlock();
 }
@@ -368,17 +368,20 @@
 	return 0;
 
 out_sysctl:
+#ifdef CONFIG_PROC_FS
 	/* For init_net: errors will trigger panic, don't unroll on error. */
 	if (!net_eq(net, &init_net))
 		remove_proc_entry("nf_log", net->nf.proc_netfilter);
-
+#endif
 	return ret;
 }
 
 static void __net_exit nf_log_net_exit(struct net *net)
 {
 	netfilter_log_sysctl_exit(net);
+#ifdef CONFIG_PROC_FS
 	remove_proc_entry("nf_log", net->nf.proc_netfilter);
+#endif
 }
 
 static struct pernet_operations nf_log_net_ops = {
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index faf1e93..962e979 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -602,7 +602,8 @@
 
 /* log handler for internal netfilter logging api */
 void
-nfulnl_log_packet(u_int8_t pf,
+nfulnl_log_packet(struct net *net,
+		  u_int8_t pf,
 		  unsigned int hooknum,
 		  const struct sk_buff *skb,
 		  const struct net_device *in,
@@ -615,7 +616,6 @@
 	const struct nf_loginfo *li;
 	unsigned int qthreshold;
 	unsigned int plen;
-	struct net *net = dev_net(in ? in : out);
 	struct nfnl_log_net *log = nfnl_log_pernet(net);
 
 	if (li_user && li_user->type == NF_LOG_TYPE_ULOG)
@@ -1045,7 +1045,9 @@
 
 static void __net_exit nfnl_log_net_exit(struct net *net)
 {
+#ifdef CONFIG_PROC_FS
 	remove_proc_entry("nfnetlink_log", net->nf.proc_netfilter);
+#endif
 }
 
 static struct pernet_operations nfnl_log_net_ops = {
diff --git a/net/netfilter/nfnetlink_queue_core.c b/net/netfilter/nfnetlink_queue_core.c
index 2e0e835..4e27fa0 100644
--- a/net/netfilter/nfnetlink_queue_core.c
+++ b/net/netfilter/nfnetlink_queue_core.c
@@ -1285,7 +1285,9 @@
 
 static void __net_exit nfnl_queue_net_exit(struct net *net)
 {
+#ifdef CONFIG_PROC_FS
 	remove_proc_entry("nfnetlink_queue", net->nf.proc_netfilter);
+#endif
 }
 
 static struct pernet_operations nfnl_queue_net_ops = {
diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c
index fe573f6..491c7d8 100644
--- a/net/netfilter/xt_LOG.c
+++ b/net/netfilter/xt_LOG.c
@@ -466,7 +466,8 @@
 
 
 static void
-ipt_log_packet(u_int8_t pf,
+ipt_log_packet(struct net *net,
+	       u_int8_t pf,
 	       unsigned int hooknum,
 	       const struct sk_buff *skb,
 	       const struct net_device *in,
@@ -475,7 +476,6 @@
 	       const char *prefix)
 {
 	struct sbuff *m;
-	struct net *net = dev_net(in ? in : out);
 
 	/* FIXME: Disabled from containers until syslog ns is supported */
 	if (!net_eq(net, &init_net))
@@ -797,7 +797,8 @@
 }
 
 static void
-ip6t_log_packet(u_int8_t pf,
+ip6t_log_packet(struct net *net,
+		u_int8_t pf,
 		unsigned int hooknum,
 		const struct sk_buff *skb,
 		const struct net_device *in,
@@ -806,7 +807,6 @@
 		const char *prefix)
 {
 	struct sbuff *m;
-	struct net *net = dev_net(in ? in : out);
 
 	/* FIXME: Disabled from containers until syslog ns is supported */
 	if (!net_eq(net, &init_net))
@@ -833,17 +833,18 @@
 {
 	const struct xt_log_info *loginfo = par->targinfo;
 	struct nf_loginfo li;
+	struct net *net = dev_net(par->in ? par->in : par->out);
 
 	li.type = NF_LOG_TYPE_LOG;
 	li.u.log.level = loginfo->level;
 	li.u.log.logflags = loginfo->logflags;
 
 	if (par->family == NFPROTO_IPV4)
-		ipt_log_packet(NFPROTO_IPV4, par->hooknum, skb, par->in,
+		ipt_log_packet(net, NFPROTO_IPV4, par->hooknum, skb, par->in,
 			       par->out, &li, loginfo->prefix);
 #if IS_ENABLED(CONFIG_IP6_NF_IPTABLES)
 	else if (par->family == NFPROTO_IPV6)
-		ip6t_log_packet(NFPROTO_IPV6, par->hooknum, skb, par->in,
+		ip6t_log_packet(net, NFPROTO_IPV6, par->hooknum, skb, par->in,
 				par->out, &li, loginfo->prefix);
 #endif
 	else
diff --git a/net/netfilter/xt_NFLOG.c b/net/netfilter/xt_NFLOG.c
index a17dd0f..fb7497c 100644
--- a/net/netfilter/xt_NFLOG.c
+++ b/net/netfilter/xt_NFLOG.c
@@ -26,13 +26,14 @@
 {
 	const struct xt_nflog_info *info = par->targinfo;
 	struct nf_loginfo li;
+	struct net *net = dev_net(par->in ? par->in : par->out);
 
 	li.type		     = NF_LOG_TYPE_ULOG;
 	li.u.ulog.copy_len   = info->len;
 	li.u.ulog.group	     = info->group;
 	li.u.ulog.qthreshold = info->threshold;
 
-	nfulnl_log_packet(par->family, par->hooknum, skb, par->in,
+	nfulnl_log_packet(net, par->family, par->hooknum, skb, par->in,
 			  par->out, &li, info->prefix);
 	return XT_CONTINUE;
 }
diff --git a/net/netfilter/xt_TCPOPTSTRIP.c b/net/netfilter/xt_TCPOPTSTRIP.c
index 25fd1c4..1eb1a44 100644
--- a/net/netfilter/xt_TCPOPTSTRIP.c
+++ b/net/netfilter/xt_TCPOPTSTRIP.c
@@ -30,17 +30,28 @@
 
 static unsigned int
 tcpoptstrip_mangle_packet(struct sk_buff *skb,
-			  const struct xt_tcpoptstrip_target_info *info,
+			  const struct xt_action_param *par,
 			  unsigned int tcphoff, unsigned int minlen)
 {
+	const struct xt_tcpoptstrip_target_info *info = par->targinfo;
 	unsigned int optl, i, j;
 	struct tcphdr *tcph;
 	u_int16_t n, o;
 	u_int8_t *opt;
+	int len;
+
+	/* This is a fragment, no TCP header is available */
+	if (par->fragoff != 0)
+		return XT_CONTINUE;
 
 	if (!skb_make_writable(skb, skb->len))
 		return NF_DROP;
 
+	len = skb->len - tcphoff;
+	if (len < (int)sizeof(struct tcphdr) ||
+	    tcp_hdr(skb)->doff * 4 > len)
+		return NF_DROP;
+
 	tcph = (struct tcphdr *)(skb_network_header(skb) + tcphoff);
 	opt  = (u_int8_t *)tcph;
 
@@ -76,7 +87,7 @@
 static unsigned int
 tcpoptstrip_tg4(struct sk_buff *skb, const struct xt_action_param *par)
 {
-	return tcpoptstrip_mangle_packet(skb, par->targinfo, ip_hdrlen(skb),
+	return tcpoptstrip_mangle_packet(skb, par, ip_hdrlen(skb),
 	       sizeof(struct iphdr) + sizeof(struct tcphdr));
 }
 
@@ -94,7 +105,7 @@
 	if (tcphoff < 0)
 		return NF_DROP;
 
-	return tcpoptstrip_mangle_packet(skb, par->targinfo, tcphoff,
+	return tcpoptstrip_mangle_packet(skb, par, tcphoff,
 	       sizeof(*ipv6h) + sizeof(struct tcphdr));
 }
 #endif
diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c
index d8d4243..6bb1d42 100644
--- a/net/netlabel/netlabel_domainhash.c
+++ b/net/netlabel/netlabel_domainhash.c
@@ -245,6 +245,71 @@
 	}
 }
 
+/**
+ * netlbl_domhsh_validate - Validate a new domain mapping entry
+ * @entry: the entry to validate
+ *
+ * This function validates the new domain mapping entry to ensure that it is
+ * a valid entry.  Returns zero on success, negative values on failure.
+ *
+ */
+static int netlbl_domhsh_validate(const struct netlbl_dom_map *entry)
+{
+	struct netlbl_af4list *iter4;
+	struct netlbl_domaddr4_map *map4;
+#if IS_ENABLED(CONFIG_IPV6)
+	struct netlbl_af6list *iter6;
+	struct netlbl_domaddr6_map *map6;
+#endif /* IPv6 */
+
+	if (entry == NULL)
+		return -EINVAL;
+
+	switch (entry->type) {
+	case NETLBL_NLTYPE_UNLABELED:
+		if (entry->type_def.cipsov4 != NULL ||
+		    entry->type_def.addrsel != NULL)
+			return -EINVAL;
+		break;
+	case NETLBL_NLTYPE_CIPSOV4:
+		if (entry->type_def.cipsov4 == NULL)
+			return -EINVAL;
+		break;
+	case NETLBL_NLTYPE_ADDRSELECT:
+		netlbl_af4list_foreach(iter4, &entry->type_def.addrsel->list4) {
+			map4 = netlbl_domhsh_addr4_entry(iter4);
+			switch (map4->type) {
+			case NETLBL_NLTYPE_UNLABELED:
+				if (map4->type_def.cipsov4 != NULL)
+					return -EINVAL;
+				break;
+			case NETLBL_NLTYPE_CIPSOV4:
+				if (map4->type_def.cipsov4 == NULL)
+					return -EINVAL;
+				break;
+			default:
+				return -EINVAL;
+			}
+		}
+#if IS_ENABLED(CONFIG_IPV6)
+		netlbl_af6list_foreach(iter6, &entry->type_def.addrsel->list6) {
+			map6 = netlbl_domhsh_addr6_entry(iter6);
+			switch (map6->type) {
+			case NETLBL_NLTYPE_UNLABELED:
+				break;
+			default:
+				return -EINVAL;
+			}
+		}
+#endif /* IPv6 */
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /*
  * Domain Hash Table Functions
  */
@@ -311,6 +376,10 @@
 	struct netlbl_af6list *tmp6;
 #endif /* IPv6 */
 
+	ret_val = netlbl_domhsh_validate(entry);
+	if (ret_val != 0)
+		return ret_val;
+
 	/* XXX - we can remove this RCU read lock as the spinlock protects the
 	 *       entire function, but before we do we need to fixup the
 	 *       netlbl_af[4,6]list RCU functions to do "the right thing" with
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 7da6b45..fc2f78d 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -52,6 +52,8 @@
 #include <linux/sunrpc/gss_api.h>
 #include <asm/uaccess.h>
 
+#include "../netns.h"
+
 static const struct rpc_authops authgss_ops;
 
 static const struct rpc_credops gss_credops;
@@ -85,8 +87,6 @@
 };
 
 /* pipe_version >= 0 if and only if someone has a pipe open. */
-static int pipe_version = -1;
-static atomic_t pipe_users = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(pipe_version_lock);
 static struct rpc_wait_queue pipe_version_rpc_waitqueue;
 static DECLARE_WAIT_QUEUE_HEAD(pipe_version_waitqueue);
@@ -266,24 +266,27 @@
 	char databuf[UPCALL_BUF_LEN];
 };
 
-static int get_pipe_version(void)
+static int get_pipe_version(struct net *net)
 {
+	struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
 	int ret;
 
 	spin_lock(&pipe_version_lock);
-	if (pipe_version >= 0) {
-		atomic_inc(&pipe_users);
-		ret = pipe_version;
+	if (sn->pipe_version >= 0) {
+		atomic_inc(&sn->pipe_users);
+		ret = sn->pipe_version;
 	} else
 		ret = -EAGAIN;
 	spin_unlock(&pipe_version_lock);
 	return ret;
 }
 
-static void put_pipe_version(void)
+static void put_pipe_version(struct net *net)
 {
-	if (atomic_dec_and_lock(&pipe_users, &pipe_version_lock)) {
-		pipe_version = -1;
+	struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
+
+	if (atomic_dec_and_lock(&sn->pipe_users, &pipe_version_lock)) {
+		sn->pipe_version = -1;
 		spin_unlock(&pipe_version_lock);
 	}
 }
@@ -291,9 +294,10 @@
 static void
 gss_release_msg(struct gss_upcall_msg *gss_msg)
 {
+	struct net *net = rpc_net_ns(gss_msg->auth->client);
 	if (!atomic_dec_and_test(&gss_msg->count))
 		return;
-	put_pipe_version();
+	put_pipe_version(net);
 	BUG_ON(!list_empty(&gss_msg->list));
 	if (gss_msg->ctx != NULL)
 		gss_put_ctx(gss_msg->ctx);
@@ -439,7 +443,10 @@
 				struct rpc_clnt *clnt,
 				const char *service_name)
 {
-	if (pipe_version == 0)
+	struct net *net = rpc_net_ns(clnt);
+	struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
+
+	if (sn->pipe_version == 0)
 		gss_encode_v0_msg(gss_msg);
 	else /* pipe_version == 1 */
 		gss_encode_v1_msg(gss_msg, clnt, service_name);
@@ -455,7 +462,7 @@
 	gss_msg = kzalloc(sizeof(*gss_msg), GFP_NOFS);
 	if (gss_msg == NULL)
 		return ERR_PTR(-ENOMEM);
-	vers = get_pipe_version();
+	vers = get_pipe_version(rpc_net_ns(clnt));
 	if (vers < 0) {
 		kfree(gss_msg);
 		return ERR_PTR(vers);
@@ -559,24 +566,34 @@
 static inline int
 gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred)
 {
+	struct net *net = rpc_net_ns(gss_auth->client);
+	struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
 	struct rpc_pipe *pipe;
 	struct rpc_cred *cred = &gss_cred->gc_base;
 	struct gss_upcall_msg *gss_msg;
+	unsigned long timeout;
 	DEFINE_WAIT(wait);
-	int err = 0;
+	int err;
 
 	dprintk("RPC:       %s for uid %u\n",
 		__func__, from_kuid(&init_user_ns, cred->cr_uid));
 retry:
+	err = 0;
+	/* Default timeout is 15s unless we know that gssd is not running */
+	timeout = 15 * HZ;
+	if (!sn->gssd_running)
+		timeout = HZ >> 2;
 	gss_msg = gss_setup_upcall(gss_auth->client, gss_auth, cred);
 	if (PTR_ERR(gss_msg) == -EAGAIN) {
 		err = wait_event_interruptible_timeout(pipe_version_waitqueue,
-				pipe_version >= 0, 15*HZ);
-		if (pipe_version < 0) {
+				sn->pipe_version >= 0, timeout);
+		if (sn->pipe_version < 0) {
+			if (err == 0)
+				sn->gssd_running = 0;
 			warn_gssd();
 			err = -EACCES;
 		}
-		if (err)
+		if (err < 0)
 			goto out;
 		goto retry;
 	}
@@ -707,20 +724,22 @@
 
 static int gss_pipe_open(struct inode *inode, int new_version)
 {
+	struct net *net = inode->i_sb->s_fs_info;
+	struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
 	int ret = 0;
 
 	spin_lock(&pipe_version_lock);
-	if (pipe_version < 0) {
+	if (sn->pipe_version < 0) {
 		/* First open of any gss pipe determines the version: */
-		pipe_version = new_version;
+		sn->pipe_version = new_version;
 		rpc_wake_up(&pipe_version_rpc_waitqueue);
 		wake_up(&pipe_version_waitqueue);
-	} else if (pipe_version != new_version) {
+	} else if (sn->pipe_version != new_version) {
 		/* Trying to open a pipe of a different version */
 		ret = -EBUSY;
 		goto out;
 	}
-	atomic_inc(&pipe_users);
+	atomic_inc(&sn->pipe_users);
 out:
 	spin_unlock(&pipe_version_lock);
 	return ret;
@@ -740,6 +759,7 @@
 static void
 gss_pipe_release(struct inode *inode)
 {
+	struct net *net = inode->i_sb->s_fs_info;
 	struct rpc_pipe *pipe = RPC_I(inode)->pipe;
 	struct gss_upcall_msg *gss_msg;
 
@@ -758,7 +778,7 @@
 	}
 	spin_unlock(&pipe->lock);
 
-	put_pipe_version();
+	put_pipe_version(net);
 }
 
 static void
diff --git a/net/sunrpc/netns.h b/net/sunrpc/netns.h
index 7111a4c..74d948f 100644
--- a/net/sunrpc/netns.h
+++ b/net/sunrpc/netns.h
@@ -28,7 +28,11 @@
 	wait_queue_head_t gssp_wq;
 	struct rpc_clnt *gssp_clnt;
 	int use_gss_proxy;
+	int pipe_version;
+	atomic_t pipe_users;
 	struct proc_dir_entry *use_gssp_proc;
+
+	unsigned int gssd_running;
 };
 
 extern int sunrpc_net_id;
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index a9129f8..e7ce4b3 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -216,11 +216,14 @@
 static int
 rpc_pipe_open(struct inode *inode, struct file *filp)
 {
+	struct net *net = inode->i_sb->s_fs_info;
+	struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
 	struct rpc_pipe *pipe;
 	int first_open;
 	int res = -ENXIO;
 
 	mutex_lock(&inode->i_mutex);
+	sn->gssd_running = 1;
 	pipe = RPC_I(inode)->pipe;
 	if (pipe == NULL)
 		goto out;
@@ -1069,6 +1072,8 @@
 	struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
 
 	mutex_init(&sn->pipefs_sb_lock);
+	sn->gssd_running = 1;
+	sn->pipe_version = -1;
 }
 
 /*
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index f8529fc..5356b12 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -324,11 +324,17 @@
  * Note: If the task is ASYNC, and is being made runnable after sitting on an
  * rpc_wait_queue, this must be called with the queue spinlock held to protect
  * the wait queue operation.
+ * Note the ordering of rpc_test_and_set_running() and rpc_clear_queued(),
+ * which is needed to ensure that __rpc_execute() doesn't loop (due to the
+ * lockless RPC_IS_QUEUED() test) before we've had a chance to test
+ * the RPC_TASK_RUNNING flag.
  */
 static void rpc_make_runnable(struct rpc_task *task)
 {
+	bool need_wakeup = !rpc_test_and_set_running(task);
+
 	rpc_clear_queued(task);
-	if (rpc_test_and_set_running(task))
+	if (!need_wakeup)
 		return;
 	if (RPC_IS_ASYNC(task)) {
 		INIT_WORK(&task->u.tk_work, rpc_async_schedule);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 84c9ad7..73405e0 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -638,17 +638,21 @@
 	 * cfg80211_mutex lock
 	 */
 	res = rfkill_register(rdev->rfkill);
-	if (res)
-		goto out_rm_dev;
+	if (res) {
+		device_del(&rdev->wiphy.dev);
+
+		mutex_lock(&cfg80211_mutex);
+		debugfs_remove_recursive(rdev->wiphy.debugfsdir);
+		list_del_rcu(&rdev->list);
+		wiphy_regulatory_deregister(wiphy);
+		mutex_unlock(&cfg80211_mutex);
+		return res;
+	}
 
 	rtnl_lock();
 	rdev->wiphy.registered = true;
 	rtnl_unlock();
 	return 0;
-
-out_rm_dev:
-	device_del(&rdev->wiphy.dev);
-	return res;
 }
 EXPORT_SYMBOL(wiphy_register);
 
@@ -866,7 +870,6 @@
 #endif
 		__cfg80211_disconnect(rdev, dev,
 				      WLAN_REASON_DEAUTH_LEAVING, true);
-		cfg80211_mlme_down(rdev, dev);
 		wdev_unlock(wdev);
 		break;
 	case NL80211_IFTYPE_MESH_POINT:
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index afa2838..dfdb5e6 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -7577,6 +7577,8 @@
 		    &tcp->payload_tok))
 		return -ENOBUFS;
 
+	nla_nest_end(msg, nl_tcp);
+
 	return 0;
 }
 
@@ -9970,6 +9972,7 @@
 	if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
 	    (netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX,
 					netdev->ifindex)) ||
+	    nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) ||
 	    nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, freq) ||
 	    (sig_dbm &&
 	     nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) ||
@@ -10010,6 +10013,7 @@
 	if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
 	    (netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX,
 				   netdev->ifindex)) ||
+	    nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) ||
 	    nla_put(msg, NL80211_ATTR_FRAME, len, buf) ||
 	    nla_put_u64(msg, NL80211_ATTR_COOKIE, cookie) ||
 	    (ack && nla_put_flag(msg, NL80211_ATTR_ACK)))
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index a9dc5c7..8b5eddf 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -961,7 +961,7 @@
 		/* was it connected by userspace SME? */
 		if (!wdev->conn) {
 			cfg80211_mlme_down(rdev, dev);
-			return 0;
+			goto disconnect;
 		}
 
 		if (wdev->sme_state == CFG80211_SME_CONNECTING &&
@@ -987,6 +987,7 @@
 			return err;
 	}
 
+ disconnect:
 	if (wdev->sme_state == CFG80211_SME_CONNECTED)
 		__cfg80211_disconnected(dev, NULL, 0, 0, false);
 	else if (wdev->sme_state == CFG80211_SME_CONNECTING)
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index ecd4fce..5755bc1 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -2441,6 +2441,7 @@
 	TP_STRUCT__entry(
 		WIPHY_ENTRY
 		WDEV_ENTRY
+		__field(bool, non_wireless)
 		__field(bool, disconnect)
 		__field(bool, magic_pkt)
 		__field(bool, gtk_rekey_failure)
@@ -2449,20 +2450,22 @@
 		__field(bool, rfkill_release)
 		__field(s32, pattern_idx)
 		__field(u32, packet_len)
-		__dynamic_array(u8, packet, wakeup->packet_present_len)
+		__dynamic_array(u8, packet,
+				wakeup ? wakeup->packet_present_len : 0)
 	),
 	TP_fast_assign(
 		WIPHY_ASSIGN;
 		WDEV_ASSIGN;
-		__entry->disconnect = wakeup->disconnect;
-		__entry->magic_pkt = wakeup->magic_pkt;
-		__entry->gtk_rekey_failure = wakeup->gtk_rekey_failure;
-		__entry->eap_identity_req = wakeup->eap_identity_req;
-		__entry->four_way_handshake = wakeup->four_way_handshake;
-		__entry->rfkill_release = wakeup->rfkill_release;
-		__entry->pattern_idx = wakeup->pattern_idx;
-		__entry->packet_len = wakeup->packet_len;
-		if (wakeup->packet && wakeup->packet_present_len)
+		__entry->non_wireless = !wakeup;
+		__entry->disconnect = wakeup ? wakeup->disconnect : false;
+		__entry->magic_pkt = wakeup ? wakeup->magic_pkt : false;
+		__entry->gtk_rekey_failure = wakeup ? wakeup->gtk_rekey_failure : false;
+		__entry->eap_identity_req = wakeup ? wakeup->eap_identity_req : false;
+		__entry->four_way_handshake = wakeup ? wakeup->four_way_handshake : false;
+		__entry->rfkill_release = wakeup ? wakeup->rfkill_release : false;
+		__entry->pattern_idx = wakeup ? wakeup->pattern_idx : false;
+		__entry->packet_len = wakeup ? wakeup->packet_len : false;
+		if (wakeup && wakeup->packet && wakeup->packet_present_len)
 			memcpy(__get_dynamic_array(packet), wakeup->packet,
 			       wakeup->packet_present_len);
 	),
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index bcfda89..0cf003d 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -64,6 +64,7 @@
 
 		if (unlikely(x->km.state != XFRM_STATE_VALID)) {
 			XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTSTATEINVALID);
+			err = -EINVAL;
 			goto error;
 		}
 
diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index 731884e..ba38f06 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -190,7 +190,7 @@
 ARIZONA_MIXER_CONTROLS("DSP3L", ARIZONA_DSP3LMIX_INPUT_1_SOURCE),
 ARIZONA_MIXER_CONTROLS("DSP3R", ARIZONA_DSP3RMIX_INPUT_1_SOURCE),
 ARIZONA_MIXER_CONTROLS("DSP4L", ARIZONA_DSP4LMIX_INPUT_1_SOURCE),
-ARIZONA_MIXER_CONTROLS("DSP5R", ARIZONA_DSP4RMIX_INPUT_1_SOURCE),
+ARIZONA_MIXER_CONTROLS("DSP4R", ARIZONA_DSP4RMIX_INPUT_1_SOURCE),
 
 ARIZONA_MIXER_CONTROLS("Mic", ARIZONA_MICMIX_INPUT_1_SOURCE),
 ARIZONA_MIXER_CONTROLS("Noise", ARIZONA_NOISEMIX_INPUT_1_SOURCE),
@@ -976,6 +976,8 @@
 	if (ret != 0)
 		return ret;
 
+	arizona_init_spk(codec);
+
 	snd_soc_dapm_disable_pin(&codec->dapm, "HAPTICS");
 
 	priv->core.arizona->dapm = &codec->dapm;
diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c
index 3853f7e..06a8000 100644
--- a/sound/soc/soc-compress.c
+++ b/sound/soc/soc-compress.c
@@ -220,8 +220,12 @@
 			goto err;
 	}
 
-	snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK,
-				SND_SOC_DAPM_STREAM_START);
+	if (cstream->direction == SND_COMPRESS_PLAYBACK)
+		snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK,
+					SND_SOC_DAPM_STREAM_START);
+	else
+		snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_CAPTURE,
+					SND_SOC_DAPM_STREAM_START);
 
 	/* cancel any delayed stream shutdown that is pending */
 	rtd->pop_wait = 0;
diff --git a/tools/perf/scripts/python/net_dropmonitor.py b/tools/perf/scripts/python/net_dropmonitor.py
index a4ffc95..b574059 100755
--- a/tools/perf/scripts/python/net_dropmonitor.py
+++ b/tools/perf/scripts/python/net_dropmonitor.py
@@ -15,35 +15,38 @@
 
 def get_kallsyms_table():
 	global kallsyms
+
 	try:
 		f = open("/proc/kallsyms", "r")
-		linecount = 0
-		for line in f:
-			linecount = linecount+1
-		f.seek(0)
 	except:
 		return
 
-
-	j = 0
 	for line in f:
 		loc = int(line.split()[0], 16)
 		name = line.split()[2]
-		j = j +1
-		if ((j % 100) == 0):
-			print "\r" + str(j) + "/" + str(linecount),
-		kallsyms.append({ 'loc': loc, 'name' : name})
-
-	print "\r" + str(j) + "/" + str(linecount)
+		kallsyms.append((loc, name))
 	kallsyms.sort()
-	return
 
 def get_sym(sloc):
 	loc = int(sloc)
-	for i in kallsyms:
-		if (i['loc'] >= loc):
-			return (i['name'], i['loc']-loc)
-	return (None, 0)
+
+	# Invariant: kallsyms[i][0] <= loc for all 0 <= i <= start
+	#            kallsyms[i][0] > loc for all end <= i < len(kallsyms)
+	start, end = -1, len(kallsyms)
+	while end != start + 1:
+		pivot = (start + end) // 2
+		if loc < kallsyms[pivot][0]:
+			end = pivot
+		else:
+			start = pivot
+
+	# Now (start == -1 or kallsyms[start][0] <= loc)
+	# and (start == len(kallsyms) - 1 or loc < kallsyms[start + 1][0])
+	if start >= 0:
+		symloc, name = kallsyms[start]
+		return (name, loc - symloc)
+	else:
+		return (None, 0)
 
 def print_drop_table():
 	print "%25s %25s %25s" % ("LOCATION", "OFFSET", "COUNT")
@@ -64,7 +67,7 @@
 
 # called from perf, when it finds a correspoinding event
 def skb__kfree_skb(name, context, cpu, sec, nsec, pid, comm,
-			skbaddr, protocol, location):
+		   skbaddr, location, protocol):
 	slocation = str(location)
 	try:
 		drop_log[slocation] = drop_log[slocation] + 1
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index d4abc59..0a63658 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -6,7 +6,6 @@
 TARGETS += mqueue
 TARGETS += net
 TARGETS += ptrace
-TARGETS += soft-dirty
 TARGETS += vm
 
 all:
diff --git a/tools/testing/selftests/soft-dirty/Makefile b/tools/testing/selftests/soft-dirty/Makefile
deleted file mode 100644
index a9cdc82..0000000
--- a/tools/testing/selftests/soft-dirty/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-CFLAGS += -iquote../../../../include/uapi -Wall
-soft-dirty: soft-dirty.c
-
-all: soft-dirty
-
-clean:
-	rm -f soft-dirty
-
-run_tests: all
-	@./soft-dirty || echo "soft-dirty selftests: [FAIL]"
diff --git a/tools/testing/selftests/soft-dirty/soft-dirty.c b/tools/testing/selftests/soft-dirty/soft-dirty.c
deleted file mode 100644
index aba4f87..0000000
--- a/tools/testing/selftests/soft-dirty/soft-dirty.c
+++ /dev/null
@@ -1,114 +0,0 @@
-#include <stdlib.h>
-#include <stdio.h>
-#include <sys/mman.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/types.h>
-
-typedef unsigned long long u64;
-
-#define PME_PRESENT	(1ULL << 63)
-#define PME_SOFT_DIRTY	(1Ull << 55)
-
-#define PAGES_TO_TEST	3
-#ifndef PAGE_SIZE
-#define PAGE_SIZE	4096
-#endif
-
-static void get_pagemap2(char *mem, u64 *map)
-{
-	int fd;
-
-	fd = open("/proc/self/pagemap2", O_RDONLY);
-	if (fd < 0) {
-		perror("Can't open pagemap2");
-		exit(1);
-	}
-
-	lseek(fd, (unsigned long)mem / PAGE_SIZE * sizeof(u64), SEEK_SET);
-	read(fd, map, sizeof(u64) * PAGES_TO_TEST);
-	close(fd);
-}
-
-static inline char map_p(u64 map)
-{
-	return map & PME_PRESENT ? 'p' : '-';
-}
-
-static inline char map_sd(u64 map)
-{
-	return map & PME_SOFT_DIRTY ? 'd' : '-';
-}
-
-static int check_pte(int step, int page, u64 *map, u64 want)
-{
-	if ((map[page] & want) != want) {
-		printf("Step %d Page %d has %c%c, want %c%c\n",
-				step, page,
-				map_p(map[page]), map_sd(map[page]),
-				map_p(want), map_sd(want));
-		return 1;
-	}
-
-	return 0;
-}
-
-static void clear_refs(void)
-{
-	int fd;
-	char *v = "4";
-
-	fd = open("/proc/self/clear_refs", O_WRONLY);
-	if (write(fd, v, 3) < 3) {
-		perror("Can't clear soft-dirty bit");
-		exit(1);
-	}
-	close(fd);
-}
-
-int main(void)
-{
-	char *mem, x;
-	u64 map[PAGES_TO_TEST];
-
-	mem = mmap(NULL, PAGES_TO_TEST * PAGE_SIZE,
-			PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON, 0, 0);
-
-	x = mem[0];
-	mem[2 * PAGE_SIZE] = 'c';
-	get_pagemap2(mem, map);
-
-	if (check_pte(1, 0, map, PME_PRESENT))
-		return 1;
-	if (check_pte(1, 1, map, 0))
-		return 1;
-	if (check_pte(1, 2, map, PME_PRESENT | PME_SOFT_DIRTY))
-		return 1;
-
-	clear_refs();
-	get_pagemap2(mem, map);
-
-	if (check_pte(2, 0, map, PME_PRESENT))
-		return 1;
-	if (check_pte(2, 1, map, 0))
-		return 1;
-	if (check_pte(2, 2, map, PME_PRESENT))
-		return 1;
-
-	mem[0] = 'a';
-	mem[PAGE_SIZE] = 'b';
-	x = mem[2 * PAGE_SIZE];
-	get_pagemap2(mem, map);
-
-	if (check_pte(3, 0, map, PME_PRESENT | PME_SOFT_DIRTY))
-		return 1;
-	if (check_pte(3, 1, map, PME_PRESENT | PME_SOFT_DIRTY))
-		return 1;
-	if (check_pte(3, 2, map, PME_PRESENT))
-		return 1;
-
-	(void)x; /* gcc warn */
-
-	printf("PASS\n");
-	return 0;
-}