tulip: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option. As result the __dev*
markings will be going away.
Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c
index 77335853..0918e38 100644
--- a/drivers/net/ethernet/dec/tulip/de2104x.c
+++ b/drivers/net/ethernet/dec/tulip/de2104x.c
@@ -1700,7 +1700,7 @@
.get_regs = de_get_regs,
};
-static void __devinit de21040_get_mac_address (struct de_private *de)
+static void de21040_get_mac_address(struct de_private *de)
{
unsigned i;
@@ -1721,7 +1721,7 @@
}
}
-static void __devinit de21040_get_media_info(struct de_private *de)
+static void de21040_get_media_info(struct de_private *de)
{
unsigned int i;
@@ -1748,7 +1748,8 @@
}
/* Note: this routine returns extra data bits for size detection. */
-static unsigned __devinit tulip_read_eeprom(void __iomem *regs, int location, int addr_len)
+static unsigned tulip_read_eeprom(void __iomem *regs, int location,
+ int addr_len)
{
int i;
unsigned retval = 0;
@@ -1783,7 +1784,7 @@
return retval;
}
-static void __devinit de21041_get_srom_info (struct de_private *de)
+static void de21041_get_srom_info(struct de_private *de)
{
unsigned i, sa_offset = 0, ofs;
u8 ee_data[DE_EEPROM_SIZE + 6] = {};
@@ -1961,8 +1962,8 @@
.ndo_validate_addr = eth_validate_addr,
};
-static int __devinit de_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int de_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
struct net_device *dev;
struct de_private *de;
@@ -2099,7 +2100,7 @@
return rc;
}
-static void __devexit de_remove_one (struct pci_dev *pdev)
+static void de_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct de_private *de = netdev_priv(dev);
@@ -2184,7 +2185,7 @@
.name = DRV_NAME,
.id_table = de_pci_tbl,
.probe = de_init_one,
- .remove = __devexit_p(de_remove_one),
+ .remove = de_remove_one,
#ifdef CONFIG_PM
.suspend = de_suspend,
.resume = de_resume,
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index f879e92..c411aed 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -479,7 +479,7 @@
#include "de4x5.h"
-static const char version[] __devinitconst =
+static const char version[] =
KERN_INFO "de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com\n";
#define c_char const char
@@ -1092,7 +1092,7 @@
};
-static int __devinit
+static int
de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
{
char name[DE4X5_NAME_LENGTH + 1];
@@ -2077,7 +2077,7 @@
return status;
}
-static int __devexit de4x5_eisa_remove (struct device *device)
+static int de4x5_eisa_remove(struct device *device)
{
struct net_device *dev;
u_long iobase;
@@ -2104,7 +2104,7 @@
.driver = {
.name = "de4x5",
.probe = de4x5_eisa_probe,
- .remove = __devexit_p (de4x5_eisa_remove),
+ .remove = de4x5_eisa_remove,
}
};
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
@@ -2118,7 +2118,7 @@
** DECchips, we can find the base SROM irrespective of the BIOS scan direction.
** For single port cards this is a time waster...
*/
-static void __devinit
+static void
srom_search(struct net_device *dev, struct pci_dev *pdev)
{
u_char pb;
@@ -2192,8 +2192,8 @@
** kernels use the V0.535[n] drivers.
*/
-static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int de4x5_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
u_char pb, pbus = 0, dev_num, dnum = 0, timer;
u_short vendor, status;
@@ -2314,7 +2314,7 @@
return error;
}
-static void __devexit de4x5_pci_remove (struct pci_dev *pdev)
+static void de4x5_pci_remove(struct pci_dev *pdev)
{
struct net_device *dev;
u_long iobase;
@@ -2344,7 +2344,7 @@
.name = "de4x5",
.id_table = de4x5_pci_tbl,
.probe = de4x5_pci_probe,
- .remove = __devexit_p (de4x5_pci_remove),
+ .remove = de4x5_pci_remove,
};
#endif
diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c
index d23755e..56a8fe7 100644
--- a/drivers/net/ethernet/dec/tulip/dmfe.c
+++ b/drivers/net/ethernet/dec/tulip/dmfe.c
@@ -291,8 +291,8 @@
};
/* Global variable declaration ----------------------------- */
-static int __devinitdata printed_version;
-static const char version[] __devinitconst =
+static int printed_version;
+static const char version[] =
"Davicom DM9xxx net driver, version " DRV_VERSION " (" DRV_RELDATE ")";
static int dmfe_debug;
@@ -367,8 +367,8 @@
* Search DM910X board ,allocate space and register it
*/
-static int __devinit dmfe_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int dmfe_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
struct dmfe_board_info *db; /* board information structure */
struct net_device *dev;
@@ -531,7 +531,7 @@
}
-static void __devexit dmfe_remove_one (struct pci_dev *pdev)
+static void dmfe_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct dmfe_board_info *db = netdev_priv(dev);
@@ -2187,7 +2187,7 @@
.name = "dmfe",
.id_table = dmfe_pci_tbl,
.probe = dmfe_init_one,
- .remove = __devexit_p(dmfe_remove_one),
+ .remove = dmfe_remove_one,
.suspend = dmfe_suspend,
.resume = dmfe_resume
};
diff --git a/drivers/net/ethernet/dec/tulip/eeprom.c b/drivers/net/ethernet/dec/tulip/eeprom.c
index 44f7e8e..df5a892 100644
--- a/drivers/net/ethernet/dec/tulip/eeprom.c
+++ b/drivers/net/ethernet/dec/tulip/eeprom.c
@@ -26,7 +26,7 @@
*/
/* Known cards that have old-style EEPROMs. */
-static struct eeprom_fixup eeprom_fixups[] __devinitdata = {
+static struct eeprom_fixup eeprom_fixups[] = {
{"Asante", 0, 0, 0x94, {0x1e00, 0x0000, 0x0800, 0x0100, 0x018c,
0x0000, 0x0000, 0xe078, 0x0001, 0x0050, 0x0018 }},
{"SMC9332DST", 0, 0, 0xC0, { 0x1e00, 0x0000, 0x0800, 0x041f,
@@ -79,7 +79,7 @@
{NULL}};
-static const char *const block_name[] __devinitconst = {
+static const char *const block_name[] = {
"21140 non-MII",
"21140 MII PHY",
"21142 Serial PHY",
@@ -102,7 +102,7 @@
* #ifdef __hppa__ should completely optimize this function away for
* non-parisc hardware.
*/
-static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
+static void tulip_build_fake_mediatable(struct tulip_private *tp)
{
#ifdef CONFIG_GSC
if (tp->flags & NEEDS_FAKE_MEDIA_TABLE) {
@@ -140,7 +140,7 @@
#endif
}
-void __devinit tulip_parse_eeprom(struct net_device *dev)
+void tulip_parse_eeprom(struct net_device *dev)
{
/*
dev is not registered at this point, so logging messages can't
@@ -339,7 +339,7 @@
#define EE_READ_CMD (6)
/* Note: this routine returns extra data bits for size detection. */
-int __devinit tulip_read_eeprom(struct net_device *dev, int location, int addr_len)
+int tulip_read_eeprom(struct net_device *dev, int location, int addr_len)
{
int i;
unsigned retval = 0;
diff --git a/drivers/net/ethernet/dec/tulip/media.c b/drivers/net/ethernet/dec/tulip/media.c
index ae937c6..93a4afa 100644
--- a/drivers/net/ethernet/dec/tulip/media.c
+++ b/drivers/net/ethernet/dec/tulip/media.c
@@ -447,7 +447,7 @@
return 0;
}
-void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
+void tulip_find_mii(struct net_device *dev, int board_idx)
{
struct tulip_private *tp = netdev_priv(dev);
int phyn, phy_idx = 0;
diff --git a/drivers/net/ethernet/dec/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c
index 885700a..157c8e6 100644
--- a/drivers/net/ethernet/dec/tulip/tulip_core.c
+++ b/drivers/net/ethernet/dec/tulip/tulip_core.c
@@ -37,7 +37,7 @@
#include <asm/prom.h>
#endif
-static char version[] __devinitdata =
+static char version[] =
"Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n";
/* A few user-configurable values. */
@@ -1191,8 +1191,8 @@
}
#ifdef CONFIG_TULIP_MWI
-static void __devinit tulip_mwi_config (struct pci_dev *pdev,
- struct net_device *dev)
+static void tulip_mwi_config(struct pci_dev *pdev,
+ struct net_device *dev)
{
struct tulip_private *tp = netdev_priv(dev);
u8 cache;
@@ -1301,8 +1301,8 @@
{ },
};
-static int __devinit tulip_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int tulip_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
struct tulip_private *tp;
/* See note below on the multiport cards. */
@@ -1927,7 +1927,7 @@
#endif /* CONFIG_PM */
-static void __devexit tulip_remove_one (struct pci_dev *pdev)
+static void tulip_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata (pdev);
struct tulip_private *tp;
@@ -1974,7 +1974,7 @@
.name = DRV_NAME,
.id_table = tulip_pci_tbl,
.probe = tulip_init_one,
- .remove = __devexit_p(tulip_remove_one),
+ .remove = tulip_remove_one,
#ifdef CONFIG_PM
.suspend = tulip_suspend,
.resume = tulip_resume,
diff --git a/drivers/net/ethernet/dec/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c
index 75d45f8..93845af 100644
--- a/drivers/net/ethernet/dec/tulip/uli526x.c
+++ b/drivers/net/ethernet/dec/tulip/uli526x.c
@@ -204,8 +204,8 @@
};
/* Global variable declaration ----------------------------- */
-static int __devinitdata printed_version;
-static const char version[] __devinitconst =
+static int printed_version;
+static const char version[] =
"ULi M5261/M5263 net driver, version " DRV_VERSION " (" DRV_RELDATE ")";
static int uli526x_debug;
@@ -281,8 +281,8 @@
* Search ULI526X board, allocate space and register it
*/
-static int __devinit uli526x_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int uli526x_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
struct uli526x_board_info *db; /* board information structure */
struct net_device *dev;
@@ -436,7 +436,7 @@
}
-static void __devexit uli526x_remove_one (struct pci_dev *pdev)
+static void uli526x_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct uli526x_board_info *db = netdev_priv(dev);
@@ -1788,7 +1788,7 @@
.name = "uli526x",
.id_table = uli526x_pci_tbl,
.probe = uli526x_init_one,
- .remove = __devexit_p(uli526x_remove_one),
+ .remove = uli526x_remove_one,
.suspend = uli526x_suspend,
.resume = uli526x_resume,
};
diff --git a/drivers/net/ethernet/dec/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c
index 7c1ec4d..0a1bda8 100644
--- a/drivers/net/ethernet/dec/tulip/winbond-840.c
+++ b/drivers/net/ethernet/dec/tulip/winbond-840.c
@@ -236,7 +236,7 @@
int drv_flags; /* Driver use, intended as capability flags. */
};
-static const struct pci_id_info pci_id_tbl[] __devinitconst = {
+static const struct pci_id_info pci_id_tbl[] = {
{ /* Sometime a Level-One switch card. */
"Winbond W89c840", CanHaveMII | HasBrokenTx | FDXOnNoMII},
{ "Winbond W89c840", CanHaveMII | HasBrokenTx},
@@ -358,8 +358,8 @@
.ndo_validate_addr = eth_validate_addr,
};
-static int __devinit w840_probe1 (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int w840_probe1(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
struct net_device *dev;
struct netdev_private *np;
@@ -1532,7 +1532,7 @@
return 0;
}
-static void __devexit w840_remove1 (struct pci_dev *pdev)
+static void w840_remove1(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
@@ -1647,7 +1647,7 @@
.name = DRV_NAME,
.id_table = w840_pci_tbl,
.probe = w840_probe1,
- .remove = __devexit_p(w840_remove1),
+ .remove = w840_remove1,
#ifdef CONFIG_PM
.suspend = w840_suspend,
.resume = w840_resume,
diff --git a/drivers/net/ethernet/dec/tulip/xircom_cb.c b/drivers/net/ethernet/dec/tulip/xircom_cb.c
index 138bf83..88feced 100644
--- a/drivers/net/ethernet/dec/tulip/xircom_cb.c
+++ b/drivers/net/ethernet/dec/tulip/xircom_cb.c
@@ -148,7 +148,7 @@
.name = "xircom_cb",
.id_table = xircom_pci_table,
.probe = xircom_probe,
- .remove = __devexit_p(xircom_remove),
+ .remove = xircom_remove,
};
@@ -190,7 +190,7 @@
first two packets that get send, and pump hates that.
*/
-static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct device *d = &pdev->dev;
struct net_device *dev = NULL;
@@ -312,7 +312,7 @@
Interrupts and such are already stopped in the "ifconfig ethX down"
code.
*/
-static void __devexit xircom_remove(struct pci_dev *pdev)
+static void xircom_remove(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct xircom_private *card = netdev_priv(dev);