Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"Just a few driver fixes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: tsc40 - remove wrong announcement of pressure support
Input: lpc32xx-keys - select INPUT_MATRIXKMAP
Input: pxa27x_keypad - clear pending interrupts on keypad config
Input: wacom - correct bad Cintiq 24HD check
Input: wacom - add INPUT_PROP_DIRECT flag to Cintiq 24HD
Input: egalax_ts - get gpio from devicetree
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
new file mode 100644
index 0000000..df70318
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+ as well as uased as irq pin
+
+Example:
+
+ egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 2>;
+ wakeup-gpios = <&gpio1 9 0>;
+ };
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index b4b65af..de08740 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -335,6 +335,7 @@
config KEYBOARD_LPC32XX
tristate "LPC32XX matrix key scanner support"
depends on ARCH_LPC32XX && OF
+ select INPUT_MATRIXKMAP
help
Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
connected to a key matrix.
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 803ff6f..cad9d5d 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -368,6 +368,9 @@
unsigned int mask = 0, direct_key_num = 0;
unsigned long kpc = 0;
+ /* clear pending interrupt bit */
+ keypad_readl(KPC);
+
/* enable matrix keys with automatic scan */
if (pdata->matrix_key_rows && pdata->matrix_key_cols) {
kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL;
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 2c1e12b..858ad44 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -391,7 +391,7 @@
features->pktlen = WACOM_PKGLEN_TPC2FG;
}
- if (features->type == MTSCREEN || WACOM_24HDT)
+ if (features->type == MTSCREEN || features->type == WACOM_24HDT)
features->pktlen = WACOM_PKGLEN_MTOUCH;
if (features->type == BAMBOO_PT) {
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index aa60101..0a67031 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1518,6 +1518,9 @@
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
+
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
wacom_setup_cintiq(wacom_wac);
break;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 1ba232c..f7668b2 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -239,7 +239,7 @@
config TOUCHSCREEN_EGALAX
tristate "EETI eGalax multi-touch panel support"
- depends on I2C
+ depends on I2C && OF
help
Say Y here to enable support for I2C connected EETI
eGalax multi-touch panels.
diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
index c1e3460..13fa62f 100644
--- a/drivers/input/touchscreen/egalax_ts.c
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -28,6 +28,7 @@
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/input/mt.h>
+#include <linux/of_gpio.h>
/*
* Mouse Mode: some panel may configure the controller to mouse mode,
@@ -122,9 +123,17 @@
/* wake up controller by an falling edge of interrupt gpio. */
static int egalax_wake_up_device(struct i2c_client *client)
{
- int gpio = irq_to_gpio(client->irq);
+ struct device_node *np = client->dev.of_node;
+ int gpio;
int ret;
+ if (!np)
+ return -ENODEV;
+
+ gpio = of_get_named_gpio(np, "wakeup-gpios", 0);
+ if (!gpio_is_valid(gpio))
+ return -ENODEV;
+
ret = gpio_request(gpio, "egalax_irq");
if (ret < 0) {
dev_err(&client->dev,
@@ -181,7 +190,11 @@
ts->input_dev = input_dev;
/* controller may be in sleep, wake it up. */
- egalax_wake_up_device(client);
+ error = egalax_wake_up_device(client);
+ if (error) {
+ dev_err(&client->dev, "Failed to wake up the controller\n");
+ goto err_free_dev;
+ }
ret = egalax_firmware_version(client);
if (ret < 0) {
@@ -274,11 +287,17 @@
static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
+static struct of_device_id egalax_ts_dt_ids[] = {
+ { .compatible = "eeti,egalax_ts" },
+ { /* sentinel */ }
+};
+
static struct i2c_driver egalax_ts_driver = {
.driver = {
.name = "egalax_ts",
.owner = THIS_MODULE,
.pm = &egalax_ts_pm_ops,
+ .of_match_table = of_match_ptr(egalax_ts_dt_ids),
},
.id_table = egalax_ts_id,
.probe = egalax_ts_probe,
diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c
index 63209aa..eb96f16 100644
--- a/drivers/input/touchscreen/tsc40.c
+++ b/drivers/input/touchscreen/tsc40.c
@@ -107,7 +107,6 @@
__set_bit(BTN_TOUCH, input_dev->keybit);
input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0);
input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0);
- input_set_abs_params(ptsc->dev, ABS_PRESSURE, 0, 0, 0, 0);
serio_set_drvdata(serio, ptsc);