ALSA: hda - Fix init verbs of AD1884A mobile model
The current ad1884a-mobile model has a problem that the speaker output
doesn't work sometimes after boot or power-saving on some HP laptops.
It seems that the verbs accessing to the non-functional widgets cause
this problem.
This patch simplifies the init verbs for mobile model not to touch
unnecessary setups so that it avoids the speaker-mute problem.
Reference: Novell bnc#495668
https://bugzilla.novell.com/show_bug.cgi?id=495668
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 9bcd8ab..84cc49c 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3817,6 +3817,49 @@
{ } /* end */
};
+static struct hda_verb ad1884a_mobile_verbs[] = {
+ /* DACs; unmute as default */
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+ /* Port-A (HP) mixer - route only from analog mixer */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ /* Port-A pin */
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Port-A (HP) pin - always unmuted */
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Port-B (mic jack) pin */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ /* Port-C (int mic) pin */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ /* Port-F (int speaker) mixer - route only from analog mixer */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ /* Port-F pin */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Analog mixer; mute as default */
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
+ /* Analog Mix output amp */
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* capture sources */
+ /* {0x0c, AC_VERB_SET_CONNECT_SEL, 0x0}, */ /* set via unsol */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0x0},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* unsolicited event for pin-sense */
+ {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+ { } /* end */
+};
+
/*
* Thinkpad X300
* 0x11 - HP
@@ -3988,7 +4031,7 @@
break;
case AD1884A_MOBILE:
spec->mixers[0] = ad1884a_mobile_mixers;
- spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
+ spec->init_verbs[0] = ad1884a_mobile_verbs;
spec->multiout.dig_out_nid = 0;
codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
codec->patch_ops.init = ad1884a_hp_init;