mac80211: add TDLS QoS param IE on setup-confirm
When TDLS QoS is supported by the the peer and the local card, add
the WMM parameter IE to the setup-confirm frame. Take the QoS settings
from the current AP, or if unsupported, use the default values from
the specification. This behavior is mandated by IEEE802.11-2012 section
10.22.4.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Liad Kaufman <liad.kaufman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c
index bfd8fc4..72eebea 100644
--- a/net/mac80211/tdls.c
+++ b/net/mac80211/tdls.c
@@ -8,6 +8,7 @@
*/
#include <linux/ieee80211.h>
+#include <linux/log2.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
@@ -93,6 +94,74 @@
memcpy(lnkid->resp_sta, rsp_addr, ETH_ALEN);
}
+/* translate numbering in the WMM parameter IE to the mac80211 notation */
+static enum ieee80211_ac_numbers ieee80211_ac_from_wmm(int ac)
+{
+ switch (ac) {
+ default:
+ WARN_ON_ONCE(1);
+ case 0:
+ return IEEE80211_AC_BE;
+ case 1:
+ return IEEE80211_AC_BK;
+ case 2:
+ return IEEE80211_AC_VI;
+ case 3:
+ return IEEE80211_AC_VO;
+ }
+}
+
+static u8 ieee80211_wmm_aci_aifsn(int aifsn, bool acm, int aci)
+{
+ u8 ret;
+
+ ret = aifsn & 0x0f;
+ if (acm)
+ ret |= 0x10;
+ ret |= (aci << 5) & 0x60;
+ return ret;
+}
+
+static u8 ieee80211_wmm_ecw(u16 cw_min, u16 cw_max)
+{
+ return ((ilog2(cw_min + 1) << 0x0) & 0x0f) |
+ ((ilog2(cw_max + 1) << 0x4) & 0xf0);
+}
+
+static void ieee80211_tdls_add_wmm_param_ie(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb)
+{
+ struct ieee80211_wmm_param_ie *wmm;
+ struct ieee80211_tx_queue_params *txq;
+ int i;
+
+ wmm = (void *)skb_put(skb, sizeof(*wmm));
+ memset(wmm, 0, sizeof(*wmm));
+
+ wmm->element_id = WLAN_EID_VENDOR_SPECIFIC;
+ wmm->len = sizeof(*wmm) - 2;
+
+ wmm->oui[0] = 0x00; /* Microsoft OUI 00:50:F2 */
+ wmm->oui[1] = 0x50;
+ wmm->oui[2] = 0xf2;
+ wmm->oui_type = 2; /* WME */
+ wmm->oui_subtype = 1; /* WME param */
+ wmm->version = 1; /* WME ver */
+ wmm->qos_info = 0; /* U-APSD not in use */
+
+ /*
+ * Use the EDCA parameters defined for the BSS, or default if the AP
+ * doesn't support it, as mandated by 802.11-2012 section 10.22.4
+ */
+ for (i = 0; i < IEEE80211_NUM_ACS; i++) {
+ txq = &sdata->tx_conf[ieee80211_ac_from_wmm(i)];
+ wmm->ac[i].aci_aifsn = ieee80211_wmm_aci_aifsn(txq->aifs,
+ txq->acm, i);
+ wmm->ac[i].cw = ieee80211_wmm_ecw(txq->cw_min, txq->cw_max);
+ wmm->ac[i].txop_limit = cpu_to_le16(txq->txop);
+ }
+}
+
static void
ieee80211_tdls_add_setup_start_ies(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb, const u8 *peer,
@@ -165,6 +234,56 @@
ieee80211_tdls_add_link_ie(sdata, skb, peer, initiator);
}
+static void
+ieee80211_tdls_add_setup_cfm_ies(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb, const u8 *peer,
+ bool initiator, const u8 *extra_ies,
+ size_t extra_ies_len)
+{
+ struct ieee80211_local *local = sdata->local;
+ size_t offset = 0, noffset;
+ struct sta_info *sta;
+ u8 *pos;
+
+ rcu_read_lock();
+
+ sta = sta_info_get(sdata, peer);
+ if (WARN_ON_ONCE(!sta)) {
+ rcu_read_unlock();
+ return;
+ }
+
+ /* add any custom IEs that go before the QoS IE */
+ if (extra_ies_len) {
+ static const u8 before_qos[] = {
+ WLAN_EID_RSN,
+ };
+ noffset = ieee80211_ie_split(extra_ies, extra_ies_len,
+ before_qos,
+ ARRAY_SIZE(before_qos),
+ offset);
+ pos = skb_put(skb, noffset - offset);
+ memcpy(pos, extra_ies + offset, noffset - offset);
+ offset = noffset;
+ }
+
+ /* add the QoS param IE if both the peer and we support it */
+ if (local->hw.queues >= IEEE80211_NUM_ACS &&
+ test_sta_flag(sta, WLAN_STA_WME))
+ ieee80211_tdls_add_wmm_param_ie(sdata, skb);
+
+ /* add any remaining IEs */
+ if (extra_ies_len) {
+ noffset = extra_ies_len;
+ pos = skb_put(skb, noffset - offset);
+ memcpy(pos, extra_ies + offset, noffset - offset);
+ }
+
+ ieee80211_tdls_add_link_ie(sdata, skb, peer, initiator);
+
+ rcu_read_unlock();
+}
+
static void ieee80211_tdls_add_ies(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb, const u8 *peer,
u8 action_code, u16 status_code,
@@ -183,6 +302,11 @@
extra_ies_len);
break;
case WLAN_TDLS_SETUP_CONFIRM:
+ if (status_code == 0)
+ ieee80211_tdls_add_setup_cfm_ies(sdata, skb, peer,
+ initiator, extra_ies,
+ extra_ies_len);
+ break;
case WLAN_TDLS_TEARDOWN:
case WLAN_TDLS_DISCOVERY_REQUEST:
if (extra_ies_len)