[SCSI] qla2xxx: Refactor call to qla2xxx_read_sfp for thermal temperature.
Eliminate duplicate code by refactoring the calls to qla2xxx_read_sfp()
in qla2x00_get_thermal_temp(). This keeps the parameter values separate
from the mailbox register mechanics. This also allows qla2xxx_read_sfp()
to be the sole "spec" for READ SFP semantics.
Signed-off_by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 7184b87..c26f0ac 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -4142,63 +4142,32 @@
qla2x00_get_thermal_temp(scsi_qla_host_t *vha, uint16_t *temp, uint16_t *frac)
{
int rval;
- mbx_cmd_t mc;
- mbx_cmd_t *mcp = &mc;
+ uint8_t byte;
struct qla_hw_data *ha = vha->hw;
- DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, ha->host_no));
+ DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, vha->host_no));
- /* High bits. */
- mcp->mb[0] = MBC_READ_SFP;
- mcp->mb[1] = 0x98;
- mcp->mb[2] = 0;
- mcp->mb[3] = 0;
- mcp->mb[6] = 0;
- mcp->mb[7] = 0;
- mcp->mb[8] = 1;
- mcp->mb[9] = 0x01;
- mcp->mb[10] = BIT_13|BIT_0;
- mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
- mcp->in_mb = MBX_1|MBX_0;
- mcp->tov = MBX_TOV_SECONDS;
- mcp->flags = 0;
- rval = qla2x00_mailbox_command(vha, mcp);
+ /* Integer part */
+ rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x01, 1, BIT_13|BIT_0);
if (rval != QLA_SUCCESS) {
DEBUG2_3_11(printk(KERN_WARNING
- "%s(%ld): failed=%x (%x).\n", __func__,
- vha->host_no, rval, mcp->mb[0]));
+ "%s(%ld): failed=%x.\n", __func__, vha->host_no, rval));
ha->flags.thermal_supported = 0;
goto fail;
}
- *temp = mcp->mb[1] & 0xFF;
+ *temp = byte;
- /* Low bits. */
- mcp->mb[0] = MBC_READ_SFP;
- mcp->mb[1] = 0x98;
- mcp->mb[2] = 0;
- mcp->mb[3] = 0;
- mcp->mb[6] = 0;
- mcp->mb[7] = 0;
- mcp->mb[8] = 1;
- mcp->mb[9] = 0x10;
- mcp->mb[10] = BIT_13|BIT_0;
- mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
- mcp->in_mb = MBX_1|MBX_0;
- mcp->tov = MBX_TOV_SECONDS;
- mcp->flags = 0;
- rval = qla2x00_mailbox_command(vha, mcp);
+ /* Fraction part */
+ rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x10, 1, BIT_13|BIT_0);
if (rval != QLA_SUCCESS) {
DEBUG2_3_11(printk(KERN_WARNING
- "%s(%ld): failed=%x (%x).\n", __func__,
- vha->host_no, rval, mcp->mb[0]));
+ "%s(%ld): failed=%x.\n", __func__, vha->host_no, rval));
ha->flags.thermal_supported = 0;
goto fail;
}
- *frac = ((mcp->mb[1] & 0xFF) >> 6) * 25;
+ *frac = (byte >> 6) * 25;
- if (rval == QLA_SUCCESS)
- DEBUG11(printk(KERN_INFO
- "%s(%ld): done.\n", __func__, ha->host_no));
+ DEBUG11(printk(KERN_INFO "%s(%ld): done.\n", __func__, vha->host_no));
fail:
return rval;
}