drivers/net: Trim trailing whitespace
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c
index 73501d8..0fa8e4d 100644
--- a/drivers/net/ne3210.c
+++ b/drivers/net/ne3210.c
@@ -14,10 +14,10 @@
2) The existing myriad of other Linux 8390 drivers by Donald Becker.
3) Info for getting IRQ and sh-mem gleaned from the EISA cfg file
- The NE3210 is an EISA shared memory NS8390 implementation. Shared
+ The NE3210 is an EISA shared memory NS8390 implementation. Shared
memory address > 1MB should work with this driver.
- Note that the .cfg file (3/11/93, v1.0) has AUI and BNC switched
+ Note that the .cfg file (3/11/93, v1.0) has AUI and BNC switched
around (or perhaps there are some defective/backwards cards ???)
This driver WILL NOT WORK FOR THE NE3200 - it is completely different
@@ -133,7 +133,7 @@
edev->slot, ifmap[port_index]);
for(i = 0; i < ETHER_ADDR_LEN; i++)
printk(" %02x", (dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i)));
-
+
/* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */
dev->irq = irq_map[(inb(ioaddr + NE3210_CFG2) >> 3) & 0x07];
@@ -161,13 +161,13 @@
goto out3;
}
}
-
+
if (!request_mem_region (phys_mem, NE3210_STOP_PG*0x100, DRV_NAME)) {
printk ("ne3210.c: Unable to request shared memory at physical address %#lx\n",
phys_mem);
goto out3;
}
-
+
printk("%dkB memory at physical address %#lx\n",
NE3210_STOP_PG/4, phys_mem);
@@ -210,7 +210,7 @@
if ((retval = register_netdev (dev)))
goto out5;
-
+
NS8390_init(dev, 0);
return 0;
@@ -226,7 +226,7 @@
release_region (ioaddr, NE3210_IO_EXTENT);
out:
free_netdev (dev);
-
+
return retval;
}
@@ -289,7 +289,7 @@
hdr->count = (hdr->count + 3) & ~3; /* Round up allocation. */
}
-/*
+/*
* Block input and output are easy on shared memory ethercards, the only
* complication is when the ring buffer wraps. The count will already
* be rounded up to a doubleword value via ne3210_get_8390_hdr() above.