mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan
Drivers that don't use chanctxes cannot perform VHT association because
they still use a "backward compatibility" pair of {ieee80211_channel,
nl80211_channel_type} in ieee80211_conf and ieee80211_local.
Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
[fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 5f05c26..2ff570f 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -79,7 +79,7 @@
u8 chainmask = ah->txchainmask;
u8 rate = 0;
- sband = &sc->sbands[common->hw->conf.channel->band];
+ sband = &sc->sbands[common->hw->conf.chandef.chan->band];
rate = sband->bitrates[rateidx].hw_value;
if (vif->bss_conf.use_short_preamble)
rate |= sband->bitrates[rateidx].hw_value_short;
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 1e85085..b184f1f 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -208,7 +208,7 @@
return true;
ath_dbg(common, CALIBRATE, "Resetting Cal %d state for channel %u\n",
- currCal->calData->calType, conf->channel->center_freq);
+ currCal->calData->calType, conf->chandef.chan->center_freq);
ah->caldata->CalValid &= ~currCal->calData->calType;
currCal->calState = CAL_WAITING;
diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index 905f1b3..6c78fe7 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -133,13 +133,14 @@
struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw,
struct ath_hw *ah)
{
- struct ieee80211_channel *curchan = hw->conf.channel;
+ struct ieee80211_channel *curchan = hw->conf.chandef.chan;
struct ath9k_channel *channel;
u8 chan_idx;
chan_idx = curchan->hw_value;
channel = &ah->channels[chan_idx];
- ath9k_cmn_update_ichannel(channel, curchan, hw->conf.channel_type);
+ ath9k_cmn_update_ichannel(channel, curchan,
+ cfg80211_get_chandef_type(&hw->conf.chandef));
return channel;
}
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index a8016d7..098e354 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -190,7 +190,7 @@
{
struct ath_hw *ah = priv->ah;
struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_channel *channel = priv->hw->conf.channel;
+ struct ieee80211_channel *channel = priv->hw->conf.chandef.chan;
struct ath9k_hw_cal_data *caldata = NULL;
enum htc_phymode mode;
__be16 htc_mode;
@@ -250,7 +250,7 @@
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &common->hw->conf;
bool fastcc;
- struct ieee80211_channel *channel = hw->conf.channel;
+ struct ieee80211_channel *channel = hw->conf.chandef.chan;
struct ath9k_hw_cal_data *caldata = NULL;
enum htc_phymode mode;
__be16 htc_mode;
@@ -602,7 +602,7 @@
u32 caps = 0;
int i, j;
- sband = priv->hw->wiphy->bands[priv->hw->conf.channel->band];
+ sband = priv->hw->wiphy->bands[priv->hw->conf.chandef.chan->band];
for (i = 0, j = 0; i < sband->n_bitrates; i++) {
if (sta->supp_rates[sband->band] & BIT(i)) {
@@ -904,7 +904,7 @@
struct ath9k_htc_priv *priv = hw->priv;
struct ath_hw *ah = priv->ah;
struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_channel *curchan = hw->conf.channel;
+ struct ieee80211_channel *curchan = hw->conf.chandef.chan;
struct ath9k_channel *init_channel;
int ret = 0;
enum htc_phymode mode;
@@ -1193,15 +1193,17 @@
}
if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || chip_reset) {
- struct ieee80211_channel *curchan = hw->conf.channel;
+ struct ieee80211_channel *curchan = hw->conf.chandef.chan;
+ enum nl80211_channel_type channel_type =
+ cfg80211_get_chandef_type(&hw->conf.chandef);
int pos = curchan->hw_value;
ath_dbg(common, CONFIG, "Set channel: %d MHz\n",
curchan->center_freq);
ath9k_cmn_update_ichannel(&priv->ah->channels[pos],
- hw->conf.channel,
- hw->conf.channel_type);
+ hw->conf.chandef.chan,
+ channel_type);
if (ath9k_htc_set_channel(priv, hw, &priv->ah->channels[pos]) < 0) {
ath_err(common, "Unable to set channel\n");
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index 3ad1fd0..306c550 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -490,7 +490,7 @@
if (txs->ts_flags & ATH9K_HTC_TXSTAT_SGI)
rate->flags |= IEEE80211_TX_RC_SHORT_GI;
} else {
- if (cur_conf->channel->band == IEEE80211_BAND_5GHZ)
+ if (cur_conf->chandef.chan->band == IEEE80211_BAND_5GHZ)
rate->idx += 4; /* No CCK rates */
}
@@ -939,7 +939,7 @@
return;
}
- band = hw->conf.channel->band;
+ band = hw->conf.chandef.chan->band;
sband = hw->wiphy->bands[band];
for (i = 0; i < sband->n_bitrates; i++) {
@@ -1078,8 +1078,8 @@
priv->ah->stats.avgbrssi = rxbuf->rxstatus.rs_rssi;
rx_status->mactime = be64_to_cpu(rxbuf->rxstatus.rs_tstamp);
- rx_status->band = hw->conf.channel->band;
- rx_status->freq = hw->conf.channel->center_freq;
+ rx_status->band = hw->conf.chandef.chan->band;
+ rx_status->freq = hw->conf.chandef.chan->center_freq;
rx_status->signal = rxbuf->rxstatus.rs_rssi + ATH_DEFAULT_NOISE_FLOOR;
rx_status->antenna = rxbuf->rxstatus.rs_antenna;
rx_status->flag |= RX_FLAG_MACTIME_END;
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 2a2ae40..d5e6a38 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -139,7 +139,7 @@
clockrate = 117;
else if (!ah->curchan) /* should really check for CCK instead */
clockrate = ATH9K_CLOCK_RATE_CCK;
- else if (conf->channel->band == IEEE80211_BAND_2GHZ)
+ else if (conf->chandef.chan->band == IEEE80211_BAND_2GHZ)
clockrate = ATH9K_CLOCK_RATE_2GHZ_OFDM;
else if (ah->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK)
clockrate = ATH9K_CLOCK_FAST_RATE_5GHZ_OFDM;
@@ -1110,7 +1110,8 @@
* BA frames in some implementations, but it has been found to fix ACK
* timeout issues in other cases as well.
*/
- if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ &&
+ if (conf->chandef.chan &&
+ conf->chandef.chan->band == IEEE80211_BAND_2GHZ &&
!IS_CHAN_HALF_RATE(chan) && !IS_CHAN_QUARTER_RATE(chan)) {
acktimeout += 64 - sifstime - ah->slottime;
ctstimeout += 48 - sifstime - ah->slottime;
diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c
index ade3afb..b1433f5 100644
--- a/drivers/net/wireless/ath/ath9k/link.c
+++ b/drivers/net/wireless/ath/ath9k/link.c
@@ -213,7 +213,7 @@
txctl.txq = sc->tx.txq_map[IEEE80211_AC_BE];
memset(tx_info, 0, sizeof(*tx_info));
- tx_info->band = hw->conf.channel->band;
+ tx_info->band = hw->conf.chandef.chan->band;
tx_info->flags |= IEEE80211_TX_CTL_NO_ACK;
tx_info->control.rates[0].idx = 0;
tx_info->control.rates[0].count = 1;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 24650fd4..f984a03 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -585,7 +585,7 @@
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_channel *curchan = hw->conf.channel;
+ struct ieee80211_channel *curchan = hw->conf.chandef.chan;
struct ath9k_channel *init_channel;
int r;
@@ -1184,7 +1184,9 @@
}
if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) {
- struct ieee80211_channel *curchan = hw->conf.channel;
+ struct ieee80211_channel *curchan = hw->conf.chandef.chan;
+ enum nl80211_channel_type channel_type =
+ cfg80211_get_chandef_type(&conf->chandef);
int pos = curchan->hw_value;
int old_pos = -1;
unsigned long flags;
@@ -1193,7 +1195,7 @@
old_pos = ah->curchan - &ah->channels[0];
ath_dbg(common, CONFIG, "Set channel: %d MHz type: %d\n",
- curchan->center_freq, conf->channel_type);
+ curchan->center_freq, channel_type);
/* update survey stats for the old channel before switching */
spin_lock_irqsave(&common->cc_lock, flags);
@@ -1208,7 +1210,7 @@
ath9k_hw_getnf(ah, ah->curchan);
ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
- curchan, conf->channel_type);
+ curchan, channel_type);
/*
* If the operating channel changes, change the survey in-use flags
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 96ac433..aa4d368 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -814,7 +814,7 @@
* So, set fourth rate in series to be same as third one for
* above conditions.
*/
- if ((sc->hw->conf.channel->band == IEEE80211_BAND_2GHZ) &&
+ if ((sc->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) &&
(conf_is_ht(&sc->hw->conf))) {
u8 dot11rate = rate_table->info[rix].dot11rate;
u8 phy = rate_table->info[rix].phy;
@@ -1328,7 +1328,7 @@
ath_dbg(ath9k_hw_common(sc->sc_ah), CONFIG,
"Operating HT Bandwidth changed to: %d\n",
- sc->hw->conf.channel_type);
+ cfg80211_get_chandef_type(&sc->hw->conf.chandef));
}
}
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ee156e5..c90ca57 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -859,7 +859,7 @@
unsigned int i = 0;
struct ath_softc __maybe_unused *sc = common->priv;
- band = hw->conf.channel->band;
+ band = hw->conf.chandef.chan->band;
sband = hw->wiphy->bands[band];
if (rx_stats->rs_rate & 0x80) {
@@ -954,8 +954,8 @@
if (ath9k_process_rate(common, hw, rx_stats, rx_status))
return -EINVAL;
- rx_status->band = hw->conf.channel->band;
- rx_status->freq = hw->conf.channel->center_freq;
+ rx_status->band = hw->conf.chandef.chan->band;
+ rx_status->freq = hw->conf.chandef.chan->center_freq;
rx_status->signal = ah->noise + rx_stats->rs_rssi;
rx_status->antenna = rx_stats->rs_antenna;
rx_status->flag |= RX_FLAG_MACTIME_END;