Merge branch 'spear/dt' into spear/clock
Conflicts:
arch/arm/mach-spear3xx/clock.c
arch/arm/mach-spear3xx/include/mach/generic.h
arch/arm/mach-spear3xx/include/mach/misc_regs.h
arch/arm/mach-spear3xx/spear320.c
arch/arm/mach-spear6xx/clock.c
arch/arm/mach-spear6xx/include/mach/misc_regs.h
Resolve even more merge conflicts.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/Documentation/devicetree/bindings/arm/spear-timer.txt b/Documentation/devicetree/bindings/arm/spear-timer.txt
new file mode 100644
index 0000000..c001722
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/spear-timer.txt
@@ -0,0 +1,18 @@
+* SPEAr ARM Timer
+
+** Timer node required properties:
+
+- compatible : Should be:
+ "st,spear-timer"
+- reg: Address range of the timer registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupt: Should contain the timer interrupt number
+
+Example:
+
+ timer@f0000000 {
+ compatible = "st,spear-timer";
+ reg = <0xf0000000 0x400>;
+ interrupts = <2>;
+ };
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
index 402ca0d..fc82b1a 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -87,6 +87,31 @@
smi: flash@fc000000 {
status = "okay";
+ clock-rate=<50000000>;
+
+ flash@f8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xf8000000 0x800000>;
+ st,smi-fast-mode;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0x0 0x10000>;
+ };
+ partition@10000 {
+ label = "u-boot";
+ reg = <0x10000 0x40000>;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x2c0000>;
+ };
+ partition@310000 {
+ label = "rootfs";
+ reg = <0x310000 0x4f0000>;
+ };
+ };
};
spi0: spi@d0100000 {
@@ -119,87 +144,87 @@
};
kbd@a0000000 {
- linux,keymap = < 0x00010000
- 0x00020100
- 0x00030200
- 0x00040300
- 0x00050400
- 0x00060500
- 0x00070600
- 0x00080700
- 0x00090800
- 0x000a0001
- 0x000c0101
- 0x000d0201
- 0x000e0301
- 0x000f0401
- 0x00100501
- 0x00110601
- 0x00120701
- 0x00130801
- 0x00140002
- 0x00150102
- 0x00160202
- 0x00170302
- 0x00180402
- 0x00190502
- 0x001a0602
- 0x001b0702
- 0x001c0802
- 0x001d0003
- 0x001e0103
- 0x001f0203
- 0x00200303
- 0x00210403
- 0x00220503
- 0x00230603
- 0x00240703
- 0x00250803
- 0x00260004
- 0x00270104
- 0x00280204
- 0x00290304
- 0x002a0404
- 0x002b0504
- 0x002c0604
- 0x002d0704
- 0x002e0804
- 0x002f0005
- 0x00300105
- 0x00310205
- 0x00320305
- 0x00330405
- 0x00340505
- 0x00350605
- 0x00360705
- 0x00370805
- 0x00380006
- 0x00390106
- 0x003a0206
- 0x003b0306
- 0x003c0406
- 0x003d0506
- 0x003e0606
- 0x003f0706
- 0x00400806
- 0x00410007
- 0x00420107
- 0x00430207
- 0x00440307
- 0x00450407
- 0x00460507
- 0x00470607
- 0x00480707
- 0x00490807
- 0x004a0008
- 0x004b0108
- 0x004c0208
- 0x004d0308
- 0x004e0408
- 0x004f0508
- 0x00500608
- 0x00510708
- 0x00520808 >;
+ linux,keymap = < 0x00000001
+ 0x00010002
+ 0x00020003
+ 0x00030004
+ 0x00040005
+ 0x00050006
+ 0x00060007
+ 0x00070008
+ 0x00080009
+ 0x0100000a
+ 0x0101000c
+ 0x0102000d
+ 0x0103000e
+ 0x0104000f
+ 0x01050010
+ 0x01060011
+ 0x01070012
+ 0x01080013
+ 0x02000014
+ 0x02010015
+ 0x02020016
+ 0x02030017
+ 0x02040018
+ 0x02050019
+ 0x0206001a
+ 0x0207001b
+ 0x0208001c
+ 0x0300001d
+ 0x0301001e
+ 0x0302001f
+ 0x03030020
+ 0x03040021
+ 0x03050022
+ 0x03060023
+ 0x03070024
+ 0x03080025
+ 0x04000026
+ 0x04010027
+ 0x04020028
+ 0x04030029
+ 0x0404002a
+ 0x0405002b
+ 0x0406002c
+ 0x0407002d
+ 0x0408002e
+ 0x0500002f
+ 0x05010030
+ 0x05020031
+ 0x05030032
+ 0x05040033
+ 0x05050034
+ 0x05060035
+ 0x05070036
+ 0x05080037
+ 0x06000038
+ 0x06010039
+ 0x0602003a
+ 0x0603003b
+ 0x0604003c
+ 0x0605003d
+ 0x0606003e
+ 0x0607003f
+ 0x06080040
+ 0x07000041
+ 0x07010042
+ 0x07020043
+ 0x07030044
+ 0x07040045
+ 0x07050046
+ 0x07060047
+ 0x07070048
+ 0x07080049
+ 0x0800004a
+ 0x0801004b
+ 0x0802004c
+ 0x0803004d
+ 0x0804004e
+ 0x0805004f
+ 0x08060050
+ 0x08070051
+ 0x08080052 >;
autorepeat;
st,mode = <0>;
status = "okay";
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
index 6d95317..dc5e2d4 100644
--- a/arch/arm/boot/dts/spear310-evb.dts
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -103,11 +103,27 @@
clock-rate=<50000000>;
flash@f8000000 {
- label = "m25p64";
- reg = <0xf8000000 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0xf8000000 0x800000>;
st,smi-fast-mode;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0x0 0x10000>;
+ };
+ partition@10000 {
+ label = "u-boot";
+ reg = <0x10000 0x40000>;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x2c0000>;
+ };
+ partition@310000 {
+ label = "rootfs";
+ reg = <0x310000 0x4f0000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index 0c6463b..6308fa3 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -110,6 +110,31 @@
smi: flash@fc000000 {
status = "okay";
+ clock-rate=<50000000>;
+
+ flash@f8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xf8000000 0x800000>;
+ st,smi-fast-mode;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0x0 0x10000>;
+ };
+ partition@10000 {
+ label = "u-boot";
+ reg = <0x10000 0x40000>;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x2c0000>;
+ };
+ partition@310000 {
+ label = "rootfs";
+ reg = <0x310000 0x4f0000>;
+ };
+ };
};
spi0: spi@d0100000 {
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index 0ae7c8e..9107255 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -139,6 +139,12 @@
interrupts = <12>;
status = "disabled";
};
+
+ timer@f0000000 {
+ compatible = "st,spear-timer";
+ reg = <0xf0000000 0x400>;
+ interrupts = <2>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts
index 790a7a8..1119c22 100644
--- a/arch/arm/boot/dts/spear600-evb.dts
+++ b/arch/arm/boot/dts/spear600-evb.dts
@@ -33,6 +33,35 @@
status = "okay";
};
+ smi: flash@fc000000 {
+ status = "okay";
+ clock-rate=<50000000>;
+
+ flash@f8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xf8000000 0x800000>;
+ st,smi-fast-mode;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0x0 0x10000>;
+ };
+ partition@10000 {
+ label = "u-boot";
+ reg = <0x10000 0x40000>;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x2c0000>;
+ };
+ partition@310000 {
+ label = "rootfs";
+ reg = <0x310000 0x4f0000>;
+ };
+ };
+ };
+
apb {
serial@d0000000 {
status = "okay";
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index d777e3a..089f0a4 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -177,6 +177,12 @@
interrupts = <28>;
status = "disabled";
};
+
+ timer@f0000000 {
+ compatible = "st,spear-timer";
+ reg = <0xf0000000 0x400>;
+ interrupts = <16>;
+ };
};
};
};
diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig
index 7ed4291..865980c 100644
--- a/arch/arm/configs/spear3xx_defconfig
+++ b/arch/arm/configs/spear3xx_defconfig
@@ -14,6 +14,9 @@
CONFIG_NET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_BLK_DEV_RAM=y
@@ -73,6 +76,7 @@
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=m
diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig
index cf94bc7..a2a1265 100644
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -8,11 +8,13 @@
CONFIG_PARTITION_ADVANCED=y
CONFIG_PLAT_SPEAR=y
CONFIG_ARCH_SPEAR6XX=y
-CONFIG_BOARD_SPEAR600_DT=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_BLK_DEV_RAM=y
@@ -64,6 +66,7 @@
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=m
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index c10eac6..4a95b94 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -21,22 +21,13 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-/* spear3xx declarations */
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE SPEAR3XX_ML1_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ SPEAR3XX_IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ SPEAR3XX_IRQ_CPU_GPT1_2
-
/* Add spear3xx family device structure declarations here */
extern struct sys_timer spear3xx_timer;
extern struct pl022_ssp_controller pl022_plat_data;
extern struct pl08x_platform_data pl080_plat_data;
/* Add spear3xx family function declarations here */
-void __init spear_setup_timer(void);
+void __init spear_setup_of_timer(void);
void __init spear3xx_clk_init(void);
void __init spear3xx_map_io(void);
void __init spear3xx_dt_init_irq(void);
diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h
index defa374..40a8c17 100644
--- a/arch/arm/mach-spear3xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear3xx/include/mach/hardware.h
@@ -1,20 +1 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-#endif /* __MACH_HARDWARE_H */
+/* empty */
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
index 6e26544..51bd62a 100644
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -14,141 +14,14 @@
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
-/* SPEAr3xx IRQ definitions */
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0 0
+/* FIXME: probe all these from DT */
#define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM 1
-#define SPEAR3XX_IRQ_CPU_GPT1_1 2
-#define SPEAR3XX_IRQ_CPU_GPT1_2 3
-#define SPEAR3XX_IRQ_BASIC_GPT1_1 4
-#define SPEAR3XX_IRQ_BASIC_GPT1_2 5
-#define SPEAR3XX_IRQ_BASIC_GPT2_1 6
-#define SPEAR3XX_IRQ_BASIC_GPT2_2 7
-#define SPEAR3XX_IRQ_BASIC_DMA 8
-#define SPEAR3XX_IRQ_BASIC_SMI 9
-#define SPEAR3XX_IRQ_BASIC_RTC 10
-#define SPEAR3XX_IRQ_BASIC_GPIO 11
-#define SPEAR3XX_IRQ_BASIC_WDT 12
-#define SPEAR3XX_IRQ_DDR_CONTROLLER 13
-#define SPEAR3XX_IRQ_SYS_ERROR 14
-#define SPEAR3XX_IRQ_WAKEUP_RCV 15
-#define SPEAR3XX_IRQ_JPEG 16
-#define SPEAR3XX_IRQ_IRDA 17
-#define SPEAR3XX_IRQ_ADC 18
-#define SPEAR3XX_IRQ_UART 19
-#define SPEAR3XX_IRQ_SSP 20
-#define SPEAR3XX_IRQ_I2C 21
-#define SPEAR3XX_IRQ_MAC_1 22
-#define SPEAR3XX_IRQ_MAC_2 23
-#define SPEAR3XX_IRQ_USB_DEV 24
-#define SPEAR3XX_IRQ_USB_H_OHCI_0 25
-#define SPEAR3XX_IRQ_USB_H_EHCI_0 26
-#define SPEAR3XX_IRQ_USB_H_EHCI_1 SPEAR3XX_IRQ_USB_H_EHCI_0
-#define SPEAR3XX_IRQ_USB_H_OHCI_1 27
#define SPEAR3XX_IRQ_GEN_RAS_1 28
#define SPEAR3XX_IRQ_GEN_RAS_2 29
#define SPEAR3XX_IRQ_GEN_RAS_3 30
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1 31
#define SPEAR3XX_IRQ_VIC_END 32
-
#define SPEAR3XX_VIRQ_START SPEAR3XX_IRQ_VIC_END
-/* SPEAr300 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0)
-#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1)
-#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2)
-#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3)
-#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4)
-#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5)
-#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6)
-#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7)
-#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
-
-/* SPEAr310 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0)
-#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1)
-#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2)
-#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3)
-#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4)
-#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5)
-#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6)
-#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8)
-#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9)
-#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10)
-#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11)
-#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13)
-#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15)
-#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16)
-#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17)
-
-/* SPEAr320 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0)
-#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1)
-#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3)
-#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4)
-#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6)
-#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7)
-#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8)
-#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9)
-#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10)
-#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11)
-#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12)
-#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13)
-#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14)
-#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15)
-#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16)
-
-/*
- * GPIO pins virtual irqs
- * Use the lowest number for the GPIO virtual IRQs base on which subarchs
- * we have compiled in
- */
-#if defined(CONFIG_MACH_SPEAR310)
-#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 18)
-#elif defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 17)
-#else
-#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 9)
-#endif
-
-#define SPEAR300_GPIO1_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_PLGPIO_COUNT 102
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_PLGPIO_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_GPIO_INT_END (SPEAR3XX_PLGPIO_INT_BASE + \
- SPEAR3XX_PLGPIO_COUNT)
-#else
-#define SPEAR3XX_GPIO_INT_END (SPEAR300_GPIO1_INT_BASE + 8)
-#endif
-
-#define SPEAR3XX_VIRQ_END SPEAR3XX_GPIO_INT_END
-#define NR_IRQS SPEAR3XX_VIRQ_END
+#define NR_IRQS 160
#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 50cfe0d..18e2ac5 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -14,9 +14,9 @@
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
-#include <mach/hardware.h>
#include <mach/spear.h>
#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
+#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index e7bc8ba..51eb953 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -15,61 +15,26 @@
#define __MACH_SPEAR3XX_H
#include <asm/memory.h>
-#include <mach/spear300.h>
-#include <mach/spear310.h>
-#include <mach/spear320.h>
-
-#define SPEAR3XX_ML_SDRAM_BASE UL(0x00000000)
-
-#define SPEAR3XX_ICM9_BASE UL(0xC0000000)
/* ICM1 - Low speed connection */
#define SPEAR3XX_ICM1_2_BASE UL(0xD0000000)
#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000)
#define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000)
#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE)
-#define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000)
#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000)
-#define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000)
-#define SPEAR3XX_ICM1_JPEG_BASE UL(0xD0800000)
-#define SPEAR3XX_ICM1_IRDA_BASE UL(0xD1000000)
-#define SPEAR3XX_ICM1_SRAM_BASE UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR3XX_ICM2_HWACCEL0_BASE UL(0xD8800000)
-#define SPEAR3XX_ICM2_HWACCEL1_BASE UL(0xD9000000)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR3XX_ICM4_BASE UL(0xE0000000)
-#define SPEAR3XX_ICM4_MII_BASE UL(0xE0800000)
-#define SPEAR3XX_ICM4_USBD_FIFO_BASE UL(0xE1000000)
-#define SPEAR3XX_ICM4_USBD_CSR_BASE UL(0xE1100000)
-#define SPEAR3XX_ICM4_USBD_PLDT_BASE UL(0xE1200000)
-#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE UL(0xE1800000)
-#define SPEAR3XX_ICM4_USB_OHCI0_BASE UL(0xE1900000)
-#define SPEAR3XX_ICM4_USB_OHCI1_BASE UL(0xE2100000)
-#define SPEAR3XX_ICM4_USB_ARB_BASE UL(0xE2800000)
/* ML1 - Multi Layer CPU Subsystem */
#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000)
-#define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000)
-#define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000)
+#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
/* ICM3 - Basic Subsystem */
-#define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000)
#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
#define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000)
-#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
-#define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000)
-#define SPEAR3XX_ICM3_WDT_BASE UL(0xFC880000)
-#define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000)
-#define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000)
#define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE)
#define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000)
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE
diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h
deleted file mode 100644
index 3b6ea07..0000000
--- a/arch/arm/mach-spear3xx/include/mach/spear300.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear300.h
- *
- * SPEAr300 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef CONFIG_MACH_SPEAR300
-
-#ifndef __MACH_SPEAR300_H
-#define __MACH_SPEAR300_H
-
-/* Base address of various IPs */
-#define SPEAR300_TELECOM_BASE UL(0x50000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR300_INT_ENB_MASK_REG 0x54
-#define SPEAR300_INT_STS_MASK_REG 0x58
-#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0)
-#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1)
-#define SPEAR300_I2S_IRQ_MASK (1 << 2)
-#define SPEAR300_TDM_IRQ_MASK (1 << 3)
-#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4)
-#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5)
-#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6)
-#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7)
-#define SPEAR300_GPIO1_IRQ_MASK (1 << 8)
-
-#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF
-
-#define SPEAR300_CLCD_BASE UL(0x60000000)
-#define SPEAR300_SDHCI_BASE UL(0x70000000)
-#define SPEAR300_NAND_0_BASE UL(0x80000000)
-#define SPEAR300_NAND_1_BASE UL(0x84000000)
-#define SPEAR300_NAND_2_BASE UL(0x88000000)
-#define SPEAR300_NAND_3_BASE UL(0x8c000000)
-#define SPEAR300_NOR_0_BASE UL(0x90000000)
-#define SPEAR300_NOR_1_BASE UL(0x91000000)
-#define SPEAR300_NOR_2_BASE UL(0x92000000)
-#define SPEAR300_NOR_3_BASE UL(0x93000000)
-#define SPEAR300_FSMC_BASE UL(0x94000000)
-#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000)
-#define SPEAR300_KEYBOARD_BASE UL(0xA0000000)
-#define SPEAR300_GPIO_BASE UL(0xA9000000)
-
-#endif /* __MACH_SPEAR300_H */
-
-#endif /* CONFIG_MACH_SPEAR300 */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h
deleted file mode 100644
index 1567d0da..0000000
--- a/arch/arm/mach-spear3xx/include/mach/spear310.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear310.h
- *
- * SPEAr310 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef CONFIG_MACH_SPEAR310
-
-#ifndef __MACH_SPEAR310_H
-#define __MACH_SPEAR310_H
-
-#define SPEAR310_NAND_BASE UL(0x40000000)
-#define SPEAR310_FSMC_BASE UL(0x44000000)
-#define SPEAR310_UART1_BASE UL(0xB2000000)
-#define SPEAR310_UART2_BASE UL(0xB2080000)
-#define SPEAR310_UART3_BASE UL(0xB2100000)
-#define SPEAR310_UART4_BASE UL(0xB2180000)
-#define SPEAR310_UART5_BASE UL(0xB2200000)
-#define SPEAR310_HDLC_BASE UL(0xB2800000)
-#define SPEAR310_RS485_0_BASE UL(0xB3000000)
-#define SPEAR310_RS485_1_BASE UL(0xB3800000)
-#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR310_INT_STS_MASK_REG 0x04
-#define SPEAR310_SMII0_IRQ_MASK (1 << 0)
-#define SPEAR310_SMII1_IRQ_MASK (1 << 1)
-#define SPEAR310_SMII2_IRQ_MASK (1 << 2)
-#define SPEAR310_SMII3_IRQ_MASK (1 << 3)
-#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4)
-#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5)
-#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6)
-#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7)
-#define SPEAR310_UART1_IRQ_MASK (1 << 8)
-#define SPEAR310_UART2_IRQ_MASK (1 << 9)
-#define SPEAR310_UART3_IRQ_MASK (1 << 10)
-#define SPEAR310_UART4_IRQ_MASK (1 << 11)
-#define SPEAR310_UART5_IRQ_MASK (1 << 12)
-#define SPEAR310_EMI_IRQ_MASK (1 << 13)
-#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14)
-#define SPEAR310_RS485_0_IRQ_MASK (1 << 15)
-#define SPEAR310_RS485_1_IRQ_MASK (1 << 16)
-
-#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF
-#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00
-#define SPEAR310_SHIRQ_RAS3_MASK 0x02000
-#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000
-
-#endif /* __MACH_SPEAR310_H */
-
-#endif /* CONFIG_MACH_SPEAR310 */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h
deleted file mode 100644
index 8cfa83f..0000000
--- a/arch/arm/mach-spear3xx/include/mach/spear320.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear320.h
- *
- * SPEAr320 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef CONFIG_MACH_SPEAR320
-
-#ifndef __MACH_SPEAR320_H
-#define __MACH_SPEAR320_H
-
-#define SPEAR320_EMI_CTRL_BASE UL(0x40000000)
-#define SPEAR320_FSMC_BASE UL(0x4C000000)
-#define SPEAR320_NAND_BASE UL(0x50000000)
-#define SPEAR320_I2S_BASE UL(0x60000000)
-#define SPEAR320_SDHCI_BASE UL(0x70000000)
-#define SPEAR320_CLCD_BASE UL(0x90000000)
-#define SPEAR320_PAR_PORT_BASE UL(0xA0000000)
-#define SPEAR320_CAN0_BASE UL(0xA1000000)
-#define SPEAR320_CAN1_BASE UL(0xA2000000)
-#define SPEAR320_UART1_BASE UL(0xA3000000)
-#define SPEAR320_UART2_BASE UL(0xA4000000)
-#define SPEAR320_SSP0_BASE UL(0xA5000000)
-#define SPEAR320_SSP1_BASE UL(0xA6000000)
-#define SPEAR320_I2C_BASE UL(0xA7000000)
-#define SPEAR320_PWM_BASE UL(0xA8000000)
-#define SPEAR320_SMII0_BASE UL(0xAA000000)
-#define SPEAR320_SMII1_BASE UL(0xAB000000)
-#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR320_INT_STS_MASK_REG 0x04
-#define SPEAR320_INT_CLR_MASK_REG 0x04
-#define SPEAR320_INT_ENB_MASK_REG 0x08
-#define SPEAR320_GPIO_IRQ_MASK (1 << 0)
-#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1)
-#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2)
-#define SPEAR320_EMI_IRQ_MASK (1 << 7)
-#define SPEAR320_CLCD_IRQ_MASK (1 << 8)
-#define SPEAR320_SPP_IRQ_MASK (1 << 9)
-#define SPEAR320_SDHCI_IRQ_MASK (1 << 10)
-#define SPEAR320_CAN_U_IRQ_MASK (1 << 11)
-#define SPEAR320_CAN_L_IRQ_MASK (1 << 12)
-#define SPEAR320_UART1_IRQ_MASK (1 << 13)
-#define SPEAR320_UART2_IRQ_MASK (1 << 14)
-#define SPEAR320_SSP1_IRQ_MASK (1 << 15)
-#define SPEAR320_SSP2_IRQ_MASK (1 << 16)
-#define SPEAR320_SMII0_IRQ_MASK (1 << 17)
-#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18)
-#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19)
-#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20)
-#define SPEAR320_I2C1_IRQ_MASK (1 << 21)
-
-#define SPEAR320_SHIRQ_RAS1_MASK 0x000380
-#define SPEAR320_SHIRQ_RAS3_MASK 0x000007
-#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800
-
-#endif /* __MACH_SPEAR320_H */
-
-#endif /* CONFIG_MACH_SPEAR320 */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 2db0bd1..f74a05b 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -19,7 +19,46 @@
#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
+
+/* Base address of various IPs */
+#define SPEAR300_TELECOM_BASE UL(0x50000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR300_INT_ENB_MASK_REG 0x54
+#define SPEAR300_INT_STS_MASK_REG 0x58
+#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0)
+#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1)
+#define SPEAR300_I2S_IRQ_MASK (1 << 2)
+#define SPEAR300_TDM_IRQ_MASK (1 << 3)
+#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4)
+#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5)
+#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6)
+#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7)
+#define SPEAR300_GPIO1_IRQ_MASK (1 << 8)
+
+#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF
+
+#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000)
+
+
+/* SPEAr300 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0)
+#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1)
+#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2)
+#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3)
+#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4)
+#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5)
+#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6)
+#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7)
+#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
@@ -298,7 +337,6 @@
static void __init spear300_map_io(void)
{
spear3xx_map_io();
- spear300_clk_init();
}
DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index aec07c9..84dfb09 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -20,7 +20,67 @@
#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
+
+#define SPEAR310_UART1_BASE UL(0xB2000000)
+#define SPEAR310_UART2_BASE UL(0xB2080000)
+#define SPEAR310_UART3_BASE UL(0xB2100000)
+#define SPEAR310_UART4_BASE UL(0xB2180000)
+#define SPEAR310_UART5_BASE UL(0xB2200000)
+#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR310_INT_STS_MASK_REG 0x04
+#define SPEAR310_SMII0_IRQ_MASK (1 << 0)
+#define SPEAR310_SMII1_IRQ_MASK (1 << 1)
+#define SPEAR310_SMII2_IRQ_MASK (1 << 2)
+#define SPEAR310_SMII3_IRQ_MASK (1 << 3)
+#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4)
+#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5)
+#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6)
+#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7)
+#define SPEAR310_UART1_IRQ_MASK (1 << 8)
+#define SPEAR310_UART2_IRQ_MASK (1 << 9)
+#define SPEAR310_UART3_IRQ_MASK (1 << 10)
+#define SPEAR310_UART4_IRQ_MASK (1 << 11)
+#define SPEAR310_UART5_IRQ_MASK (1 << 12)
+#define SPEAR310_EMI_IRQ_MASK (1 << 13)
+#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14)
+#define SPEAR310_RS485_0_IRQ_MASK (1 << 15)
+#define SPEAR310_RS485_1_IRQ_MASK (1 << 16)
+
+#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF
+#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00
+#define SPEAR310_SHIRQ_RAS3_MASK 0x02000
+#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000
+
+/* SPEAr310 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0)
+#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1)
+#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2)
+#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3)
+#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4)
+#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5)
+#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6)
+#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8)
+#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9)
+#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10)
+#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11)
+#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13)
+#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15)
+#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16)
+#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17)
+
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
@@ -418,7 +478,6 @@
static void __init spear310_map_io(void)
{
spear3xx_map_io();
- spear310_clk_init();
}
DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index fb28c18..a88fa84 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -21,9 +21,67 @@
#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
-#include <mach/hardware.h>
#include <mach/spear.h>
+#define SPEAR320_UART1_BASE UL(0xA3000000)
+#define SPEAR320_UART2_BASE UL(0xA4000000)
+#define SPEAR320_SSP0_BASE UL(0xA5000000)
+#define SPEAR320_SSP1_BASE UL(0xA6000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR320_INT_STS_MASK_REG 0x04
+#define SPEAR320_INT_CLR_MASK_REG 0x04
+#define SPEAR320_INT_ENB_MASK_REG 0x08
+#define SPEAR320_GPIO_IRQ_MASK (1 << 0)
+#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1)
+#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2)
+#define SPEAR320_EMI_IRQ_MASK (1 << 7)
+#define SPEAR320_CLCD_IRQ_MASK (1 << 8)
+#define SPEAR320_SPP_IRQ_MASK (1 << 9)
+#define SPEAR320_SDHCI_IRQ_MASK (1 << 10)
+#define SPEAR320_CAN_U_IRQ_MASK (1 << 11)
+#define SPEAR320_CAN_L_IRQ_MASK (1 << 12)
+#define SPEAR320_UART1_IRQ_MASK (1 << 13)
+#define SPEAR320_UART2_IRQ_MASK (1 << 14)
+#define SPEAR320_SSP1_IRQ_MASK (1 << 15)
+#define SPEAR320_SSP2_IRQ_MASK (1 << 16)
+#define SPEAR320_SMII0_IRQ_MASK (1 << 17)
+#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18)
+#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19)
+#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20)
+#define SPEAR320_I2C1_IRQ_MASK (1 << 21)
+
+#define SPEAR320_SHIRQ_RAS1_MASK 0x000380
+#define SPEAR320_SHIRQ_RAS3_MASK 0x000007
+#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800
+
+/* SPEAr320 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0)
+#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1)
+#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3)
+#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4)
+#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6)
+#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7)
+#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8)
+#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9)
+#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10)
+#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11)
+#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12)
+#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13)
+#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14)
+#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15)
+#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16)
+
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -422,10 +480,19 @@
NULL,
};
+struct map_desc spear320_io_desc[] __initdata = {
+ {
+ .virtual = VA_SPEAR320_SOC_CONFIG_BASE,
+ .pfn = __phys_to_pfn(SPEAR320_SOC_CONFIG_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ },
+};
+
static void __init spear320_map_io(void)
{
+ iotable_init(spear320_io_desc, ARRAY_SIZE(spear320_io_desc));
spear3xx_map_io();
- spear320_clk_init();
}
DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 71927c7..f22419e 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -21,7 +21,7 @@
#include <asm/hardware/vic.h>
#include <plat/pl080.h>
#include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
/* ssp device registration */
struct pl022_ssp_controller pl022_plat_data = {
@@ -111,7 +111,7 @@
clk_put(gpt_clk);
clk_put(pclk);
- spear_setup_timer();
+ spear_setup_of_timer();
}
struct sys_timer spear3xx_timer = {
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
index 116b993..65514b15 100644
--- a/arch/arm/mach-spear6xx/include/mach/generic.h
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -15,34 +15,9 @@
#define __MACH_GENERIC_H
#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE SPEAR6XX_CPU_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ IRQ_CPU_GPT1_2
-
-/* Add spear6xx family device structure declarations here */
-extern struct amba_device gpio_device[];
-extern struct amba_device uart_device[];
-extern struct sys_timer spear6xx_timer;
-
-/* Add spear6xx family function declarations here */
-void __init spear_setup_timer(void);
-void __init spear6xx_map_io(void);
-void __init spear6xx_init_irq(void);
-void __init spear6xx_init(void);
-void __init spear600_init(void);
-void __init spear6xx_clk_init(void);
-
+void __init spear_setup_of_timer(void);
void spear_restart(char, const char *);
-
-/* Add spear600 machine device structure declarations here */
+void __init spear6xx_clk_init(void);
#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h
index 0b3f96a..40a8c17 100644
--- a/arch/arm/mach-spear6xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear6xx/include/mach/hardware.h
@@ -1,23 +1 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x) (x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
+/* empty */
diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h
index 8f214b0..37a5c41 100644
--- a/arch/arm/mach-spear6xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear6xx/include/mach/irqs.h
@@ -16,82 +16,10 @@
/* IRQ definitions */
/* VIC 1 */
-#define IRQ_INTRCOMM_SW_IRQ 0
-#define IRQ_INTRCOMM_CPU_1 1
-#define IRQ_INTRCOMM_CPU_2 2
-#define IRQ_INTRCOMM_RAS2A11_1 3
-#define IRQ_INTRCOMM_RAS2A11_2 4
-#define IRQ_INTRCOMM_RAS2A12_1 5
-#define IRQ_INTRCOMM_RAS2A12_2 6
-#define IRQ_GEN_RAS_0 7
-#define IRQ_GEN_RAS_1 8
-#define IRQ_GEN_RAS_2 9
-#define IRQ_GEN_RAS_3 10
-#define IRQ_GEN_RAS_4 11
-#define IRQ_GEN_RAS_5 12
-#define IRQ_GEN_RAS_6 13
-#define IRQ_GEN_RAS_7 14
-#define IRQ_GEN_RAS_8 15
-#define IRQ_CPU_GPT1_1 16
-#define IRQ_CPU_GPT1_2 17
-#define IRQ_LOCAL_GPIO 18
-#define IRQ_PLL_UNLOCK 19
-#define IRQ_JPEG 20
-#define IRQ_FSMC 21
-#define IRQ_IRDA 22
-#define IRQ_RESERVED 23
-#define IRQ_UART_0 24
-#define IRQ_UART_1 25
-#define IRQ_SSP_1 26
-#define IRQ_SSP_2 27
-#define IRQ_I2C 28
-#define IRQ_GEN_RAS_9 29
-#define IRQ_GEN_RAS_10 30
-#define IRQ_GEN_RAS_11 31
-
-/* VIC 2 */
-#define IRQ_APPL_GPT1_1 32
-#define IRQ_APPL_GPT1_2 33
-#define IRQ_APPL_GPT2_1 34
-#define IRQ_APPL_GPT2_2 35
-#define IRQ_APPL_GPIO 36
-#define IRQ_APPL_SSP 37
-#define IRQ_APPL_ADC 38
-#define IRQ_APPL_RESERVED 39
-#define IRQ_AHB_EXP_MASTER 40
-#define IRQ_DDR_CONTROLLER 41
-#define IRQ_BASIC_DMA 42
-#define IRQ_BASIC_RESERVED1 43
-#define IRQ_BASIC_SMI 44
-#define IRQ_BASIC_CLCD 45
-#define IRQ_EXP_AHB_1 46
-#define IRQ_EXP_AHB_2 47
-#define IRQ_BASIC_GPT1_1 48
-#define IRQ_BASIC_GPT1_2 49
-#define IRQ_BASIC_RTC 50
-#define IRQ_BASIC_GPIO 51
-#define IRQ_BASIC_WDT 52
-#define IRQ_BASIC_RESERVED 53
-#define IRQ_AHB_EXP_SLAVE 54
-#define IRQ_GMAC_1 55
-#define IRQ_GMAC_2 56
-#define IRQ_USB_DEV 57
-#define IRQ_USB_H_OHCI_0 58
-#define IRQ_USB_H_EHCI_0 59
-#define IRQ_USB_H_OHCI_1 60
-#define IRQ_USB_H_EHCI_1 61
-#define IRQ_EXP_AHB_3 62
-#define IRQ_EXP_AHB_4 63
-
#define IRQ_VIC_END 64
/* GPIO pins virtual irqs */
-#define SPEAR_GPIO_INT_BASE IRQ_VIC_END
-#define SPEAR_GPIO0_INT_BASE SPEAR_GPIO_INT_BASE
-#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO0_INT_BASE + 8)
-#define SPEAR_GPIO2_INT_BASE (SPEAR_GPIO1_INT_BASE + 8)
-#define SPEAR_GPIO_INT_END (SPEAR_GPIO2_INT_BASE + 8)
-#define VIRTUAL_IRQS (SPEAR_GPIO_INT_END - IRQ_VIC_END)
-#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS)
+#define VIRTUAL_IRQS 24
+#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS)
#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 633074f..179e457 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -14,9 +14,9 @@
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
-#include <mach/hardware.h>
#include <mach/spear.h>
#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
+#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h
index 7fd6215..cb8ed2f 100644
--- a/arch/arm/mach-spear6xx/include/mach/spear.h
+++ b/arch/arm/mach-spear6xx/include/mach/spear.h
@@ -15,69 +15,25 @@
#define __MACH_SPEAR6XX_H
#include <asm/memory.h>
-#include <mach/spear600.h>
-#define SPEAR6XX_ML_SDRAM_BASE UL(0x00000000)
/* ICM1 - Low speed connection */
#define SPEAR6XX_ICM1_BASE UL(0xD0000000)
-
+#define VA_SPEAR6XX_ICM1_BASE UL(0xFD000000)
#define SPEAR6XX_ICM1_UART0_BASE UL(0xD0000000)
-#define VA_SPEAR6XX_ICM1_UART0_BASE IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
-
-#define SPEAR6XX_ICM1_UART1_BASE UL(0xD0080000)
-#define SPEAR6XX_ICM1_SSP0_BASE UL(0xD0100000)
-#define SPEAR6XX_ICM1_SSP1_BASE UL(0xD0180000)
-#define SPEAR6XX_ICM1_I2C_BASE UL(0xD0200000)
-#define SPEAR6XX_ICM1_JPEG_BASE UL(0xD0800000)
-#define SPEAR6XX_ICM1_IRDA_BASE UL(0xD1000000)
-#define SPEAR6XX_ICM1_FSMC_BASE UL(0xD1800000)
-#define SPEAR6XX_ICM1_NAND_BASE UL(0xD2000000)
-#define SPEAR6XX_ICM1_SRAM_BASE UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR6XX_ICM2_BASE UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR0_BASE UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR1_BASE UL(0xD8080000)
-#define SPEAR6XX_ICM2_GPIO_BASE UL(0xD8100000)
-#define SPEAR6XX_ICM2_SSP2_BASE UL(0xD8180000)
-#define SPEAR6XX_ICM2_ADC_BASE UL(0xD8200000)
+#define VA_SPEAR6XX_ICM1_UART0_BASE (VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE)
/* ML-1, 2 - Multi Layer CPU Subsystem */
#define SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
-#define SPEAR6XX_CPU_TMR_BASE UL(0xF0000000)
-#define SPEAR6XX_CPU_GPIO_BASE UL(0xF0100000)
-#define SPEAR6XX_CPU_VIC_SEC_BASE UL(0xF1000000)
-#define VA_SPEAR6XX_CPU_VIC_SEC_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
-#define SPEAR6XX_CPU_VIC_PRI_BASE UL(0xF1100000)
-#define VA_SPEAR6XX_CPU_VIC_PRI_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
+#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
/* ICM3 - Basic Subsystem */
-#define SPEAR6XX_ICM3_BASE UL(0xF8000000)
-#define SPEAR6XX_ICM3_SMEM_BASE UL(0xF8000000)
#define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
-#define SPEAR6XX_ICM3_CLCD_BASE UL(0xFC200000)
+#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
#define SPEAR6XX_ICM3_DMA_BASE UL(0xFC400000)
-#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
-#define SPEAR6XX_ICM3_TMR_BASE UL(0xFC800000)
-#define SPEAR6XX_ICM3_WDT_BASE UL(0xFC880000)
-#define SPEAR6XX_ICM3_RTC_BASE UL(0xFC900000)
-#define SPEAR6XX_ICM3_GPIO_BASE UL(0xFC980000)
#define SPEAR6XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
-#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE)
#define SPEAR6XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
-#define VA_SPEAR6XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR6XX_ICM4_BASE UL(0xE0000000)
-#define SPEAR6XX_ICM4_GMAC_BASE UL(0xE0800000)
-#define SPEAR6XX_ICM4_USBD_FIFO_BASE UL(0xE1000000)
-#define SPEAR6XX_ICM4_USBD_CSR_BASE UL(0xE1100000)
-#define SPEAR6XX_ICM4_USBD_PLDT_BASE UL(0xE1200000)
-#define SPEAR6XX_ICM4_USB_EHCI0_BASE UL(0xE1800000)
-#define SPEAR6XX_ICM4_USB_OHCI0_BASE UL(0xE1900000)
-#define SPEAR6XX_ICM4_USB_EHCI1_BASE UL(0xE2000000)
-#define SPEAR6XX_ICM4_USB_OHCI1_BASE UL(0xE2100000)
-#define SPEAR6XX_ICM4_USB_ARB_BASE UL(0xE2800000)
+#define VA_SPEAR6XX_ICM3_MISC_REG_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE)
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE
diff --git a/arch/arm/mach-spear6xx/include/mach/spear600.h b/arch/arm/mach-spear6xx/include/mach/spear600.h
deleted file mode 100644
index c068cc5..0000000
--- a/arch/arm/mach-spear6xx/include/mach/spear600.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-spear66xx/include/mach/spear600.h
- *
- * SPEAr600 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef CONFIG_MACH_SPEAR600
-
-#ifndef __MACH_SPEAR600_H
-#define __MACH_SPEAR600_H
-
-#endif /* __MACH_SPEAR600_H */
-
-#endif /* CONFIG_MACH_SPEAR600 */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index e9031ec6..2e2e359 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -14,6 +14,8 @@
*/
#include <linux/amba/pl08x.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -21,9 +23,11 @@
#include <asm/hardware/pl080.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
#include <plat/pl080.h>
#include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
/* dmac device registration */
static struct pl08x_channel_data spear600_dma_info[] = {
@@ -384,32 +388,29 @@
.num_slave_channels = ARRAY_SIZE(spear600_dma_info),
};
-/* Following will create static virtual/physical mappings */
-static struct map_desc spear6xx_io_desc[] __initdata = {
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL VIRTUAL
+ * 0xF0000000 0xF0000000
+ * 0xF1000000 0xF1000000
+ * 0xD0000000 0xFD000000
+ * 0xFC000000 0xFC000000
+ */
+struct map_desc spear6xx_io_desc[] __initdata = {
{
- .virtual = VA_SPEAR6XX_ICM1_UART0_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
- .length = SZ_4K,
+ .virtual = VA_SPEAR6XX_ML_CPU_BASE,
+ .pfn = __phys_to_pfn(SPEAR6XX_ML_CPU_BASE),
+ .length = 2 * SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VA_SPEAR6XX_ICM1_BASE,
+ .pfn = __phys_to_pfn(SPEAR6XX_ICM1_BASE),
+ .length = SZ_16M,
.type = MT_DEVICE
}, {
- .virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
- .length = SZ_4K,
+ .virtual = VA_SPEAR6XX_ICM3_SMI_CTRL_BASE,
+ .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE),
+ .length = SZ_16M,
.type = MT_DEVICE
},
};
@@ -446,7 +447,7 @@
clk_put(gpt_clk);
clk_put(pclk);
- spear_setup_timer();
+ spear_setup_of_timer();
}
struct sys_timer spear6xx_timer = {
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 02b160a..ab3de72 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <linux/amba/serial.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
.macro addruart, rp, rv, tmp
mov \rp, #SPEAR_DBG_UART_BASE @ Physical base
diff --git a/arch/arm/plat-spear/include/plat/hardware.h b/arch/arm/plat-spear/include/plat/hardware.h
deleted file mode 100644
index 70187d7..0000000
--- a/arch/arm/plat-spear/include/plat/hardware.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/hardware.h
- *
- * Hardware definitions for SPEAr
- *
- * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_HARDWARE_H
-#define __PLAT_HARDWARE_H
-
-#endif /* __PLAT_HARDWARE_H */
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 1bf8452..6dd455b 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -13,7 +13,7 @@
#include <linux/io.h>
#include <linux/amba/serial.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
#ifndef __PLAT_UNCOMPRESS_H
#define __PLAT_UNCOMPRESS_H
diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c
index d53d75e..a56a067 100644
--- a/arch/arm/plat-spear/pl080.c
+++ b/arch/arm/plat-spear/pl080.c
@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/spinlock_types.h>
+#include <mach/spear.h>
#include <mach/misc_regs.h>
static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x);
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
index 16f203e..4471a23 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/plat-spear/restart.c
@@ -13,7 +13,7 @@
#include <linux/io.h>
#include <asm/system_misc.h>
#include <asm/hardware/sp810.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
#include <mach/generic.h>
void spear_restart(char mode, const char *cmd)
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index 1c94989..03321af 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -15,14 +15,15 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
#include <linux/time.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
#include <mach/generic.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
/*
* We would use TIMER0 and TIMER1 as clockevent and clocksource.
@@ -175,7 +176,7 @@
.handler = spear_timer_interrupt
};
-static void __init spear_clockevent_init(void)
+static void __init spear_clockevent_init(int irq)
{
u32 tick_rate;
@@ -195,22 +196,35 @@
clockevents_register_device(&clkevt);
- setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
+ setup_irq(irq, &spear_timer_irq);
}
-void __init spear_setup_timer(void)
-{
- int ret;
+const static struct of_device_id timer_of_match[] __initconst = {
+ { .compatible = "st,spear-timer", },
+ { },
+};
- if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
- pr_err("%s:cannot get IO addr\n", __func__);
+void __init spear_setup_of_timer(void)
+{
+ struct device_node *np;
+ int irq, ret;
+
+ np = of_find_matching_node(NULL, timer_of_match);
+ if (!np) {
+ pr_err("%s: No timer passed via DT\n", __func__);
return;
}
- gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ pr_err("%s: No irq passed for timer via DT\n", __func__);
+ return;
+ }
+
+ gpt_base = of_iomap(np, 0);
if (!gpt_base) {
- pr_err("%s:ioremap failed for gpt\n", __func__);
- goto err_mem;
+ pr_err("%s: of iomap failed\n", __func__);
+ return;
}
gpt_clk = clk_get_sys("gpt0", NULL);
@@ -225,7 +239,7 @@
goto err_prepare_enable_clk;
}
- spear_clockevent_init();
+ spear_clockevent_init(irq);
spear_clocksource_init();
return;
@@ -234,6 +248,4 @@
clk_put(gpt_clk);
err_iomap:
iounmap(gpt_base);
-err_mem:
- release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
}
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 66d96f1..7e262a6 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -1,4 +1,5 @@
+#include <linux/device.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/module.h>