[ARM] 3401/1: lpd7a40x: platform update
Patch from Marc Singer
Updates to the lpd7a40x_platform files. Includes support for new
architecture, lpd7a400.
Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/include/asm-arm/arch-lh7a40x/entry-macro.S
index a2f67c0..9fc7f49 100644
--- a/include/asm-arm/arch-lh7a40x/entry-macro.S
+++ b/include/asm-arm/arch-lh7a40x/entry-macro.S
@@ -10,11 +10,73 @@
#include <asm/hardware.h>
#include <asm/arch/irqs.h>
-# if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
-# error "LH7A400 and LH7A404 are mutually exclusive"
-# endif
+/* In order to allow there to be support for both of the processor
+ classes at the same time, we make a hack here that isn't very
+ pretty. At startup, the link pointed to with the
+ branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
+ detected as a lh7a404.
-# if defined (CONFIG_ARCH_LH7A400)
+ *** FIXME: we should clean this up so that there is only one
+ implementation for each CPU's design.
+
+*/
+
+#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+branch_irq_lh7a400: b 1000f
+
+@ Implementation of the LH7A404 get_irqnr_and_base.
+
+ mov \irqnr, #0 @ VIC1 irq base
+ mov \base, #io_p2v(0x80000000) @ APB registers
+ add \base, \base, #0x8000
+ ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR
+ tst \tmp, #VA_VECTORED @ Direct vectored
+ bne 1002f
+ tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1
+ ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS
+ bne 1001f
+ add \base, \base, #(0xa000 - 0x8000)
+ ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR
+ tst \tmp, #VA_VECTORED @ Direct vectored
+ bne 1002f
+ ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS
+ mov \irqnr, #32 @ VIC2 irq base
+
+1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
+ bcs 1008f @ Bit set; irq found
+ add \irqnr, \irqnr, #1
+ bne 1001b @ Until no bits
+ b 1009f @ Nothing? Hmm.
+1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits
+1008: movs \irqstat, #1 @ Force !Z
+ str \tmp, [\base, #0x0030] @ Clear vector
+ b 1009f
+
+@ Implementation of the LH7A400 get_irqnr_and_base.
+
+1000: mov \irqnr, #0
+ mov \base, #io_p2v(0x80000000) @ APB registers
+ ldr \irqstat, [\base, #0x500] @ PIC INTSR
+
+1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
+ bcs 1008f @ Bit set; irq found
+ add \irqnr, \irqnr, #1
+ bne 1001b @ Until no bits
+ b 1009f @ Nothing? Hmm.
+1008: movs \irqstat, #1 @ Force !Z
+
+1009:
+ .endm
+
+
+
+#elif defined (CONFIG_ARCH_LH7A400)
.macro disable_fiq
.endm