MIPS: Netlogic: Add XLP PIC irqdomain
Add a legacy irq domain for the XLP PIC interrupts. This will be used
when interrupts are assigned from the device tree. This change is required
after commit c5cdc67 "irqdomain: Remove temporary MIPS workaround code".
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Cc: Jayachandran C <jchandra@broadcom.com>
Patchwork: https://patchwork.linux-mips.org/patch/5597/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c
index 73facb2..1c7e3a1 100644
--- a/arch/mips/netlogic/common/irq.c
+++ b/arch/mips/netlogic/common/irq.c
@@ -40,6 +40,10 @@
#include <linux/slab.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
#include <asm/errno.h>
#include <asm/signal.h>
#include <asm/ptrace.h>
@@ -223,17 +227,6 @@
nodep->irqmask = irqmask;
}
-void __init arch_init_irq(void)
-{
- /* Initialize the irq descriptors */
- nlm_init_percpu_irqs();
- nlm_init_node_irqs(0);
- write_c0_eimr(nlm_current_node()->irqmask);
-#if defined(CONFIG_CPU_XLR)
- nlm_setup_fmn_irq();
-#endif
-}
-
void nlm_smp_irq_init(int hwcpuid)
{
int node, cpu;
@@ -266,3 +259,56 @@
/* top level irq handling */
do_IRQ(nlm_irq_to_xirq(node, i));
}
+
+#ifdef CONFIG_OF
+static struct irq_domain *xlp_pic_domain;
+
+static const struct irq_domain_ops xlp_pic_irq_domain_ops = {
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+static int __init xlp_of_pic_init(struct device_node *node,
+ struct device_node *parent)
+{
+ const int n_picirqs = PIC_IRT_LAST_IRQ - PIC_IRQ_BASE + 1;
+ struct resource res;
+ int socid, ret;
+
+ /* we need a hack to get the PIC's SoC chip id */
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret < 0) {
+ pr_err("PIC %s: reg property not found!\n", node->name);
+ return -EINVAL;
+ }
+ socid = (res.start >> 18) & 0x3;
+ xlp_pic_domain = irq_domain_add_legacy(node, n_picirqs,
+ nlm_irq_to_xirq(socid, PIC_IRQ_BASE), PIC_IRQ_BASE,
+ &xlp_pic_irq_domain_ops, NULL);
+ if (xlp_pic_domain == NULL) {
+ pr_err("PIC %s: Creating legacy domain failed!\n", node->name);
+ return -EINVAL;
+ }
+ pr_info("Node %d: IRQ domain created for PIC@%pa\n", socid,
+ &res.start);
+ return 0;
+}
+
+static struct of_device_id __initdata xlp_pic_irq_ids[] = {
+ { .compatible = "netlogic,xlp-pic", .data = xlp_of_pic_init },
+ {},
+};
+#endif
+
+void __init arch_init_irq(void)
+{
+ /* Initialize the irq descriptors */
+ nlm_init_percpu_irqs();
+ nlm_init_node_irqs(0);
+ write_c0_eimr(nlm_current_node()->irqmask);
+#if defined(CONFIG_CPU_XLR)
+ nlm_setup_fmn_irq();
+#endif
+#if defined(CONFIG_OF)
+ of_irq_init(xlp_pic_irq_ids);
+#endif
+}