| /* |
| * Carsten Langgaard, carstenl@mips.com |
| * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. |
| * Copyright (C) 2001 Ralf Baechle |
| * |
| * This program is free software; you can distribute it and/or modify it |
| * under the terms of the GNU General Public License (Version 2) as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| * |
| * Routines for generic manipulation of the interrupts found on the MIPS |
| * Malta board. |
| * The interrupt controller is located in the South Bridge a PIIX4 device |
| * with two internal 82C95 interrupt controllers. |
| */ |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/kernel.h> |
| #include <linux/random.h> |
| |
| #include <asm/i8259.h> |
| #include <asm/irq_cpu.h> |
| #include <asm/io.h> |
| #include <asm/irq_regs.h> |
| #include <asm/mips-boards/malta.h> |
| #include <asm/mips-boards/maltaint.h> |
| #include <asm/mips-boards/piix4.h> |
| #include <asm/gt64120.h> |
| #include <asm/mips-boards/generic.h> |
| #include <asm/mips-boards/msc01_pci.h> |
| #include <asm/msc01_ic.h> |
| |
| static DEFINE_SPINLOCK(mips_irq_lock); |
| |
| static inline int mips_pcibios_iack(void) |
| { |
| int irq; |
| u32 dummy; |
| |
| /* |
| * Determine highest priority pending interrupt by performing |
| * a PCI Interrupt Acknowledge cycle. |
| */ |
| switch (mips_revision_sconid) { |
| case MIPS_REVISION_SCON_SOCIT: |
| case MIPS_REVISION_SCON_ROCIT: |
| case MIPS_REVISION_SCON_SOCITSC: |
| case MIPS_REVISION_SCON_SOCITSCP: |
| MSC_READ(MSC01_PCI_IACK, irq); |
| irq &= 0xff; |
| break; |
| case MIPS_REVISION_SCON_GT64120: |
| irq = GT_READ(GT_PCI0_IACK_OFS); |
| irq &= 0xff; |
| break; |
| case MIPS_REVISION_SCON_BONITO: |
| /* The following will generate a PCI IACK cycle on the |
| * Bonito controller. It's a little bit kludgy, but it |
| * was the easiest way to implement it in hardware at |
| * the given time. |
| */ |
| BONITO_PCIMAP_CFG = 0x20000; |
| |
| /* Flush Bonito register block */ |
| dummy = BONITO_PCIMAP_CFG; |
| iob(); /* sync */ |
| |
| irq = readl((u32 *)_pcictrl_bonito_pcicfg); |
| iob(); /* sync */ |
| irq &= 0xff; |
| BONITO_PCIMAP_CFG = 0; |
| break; |
| default: |
| printk("Unknown system controller.\n"); |
| return -1; |
| } |
| return irq; |
| } |
| |
| static inline int get_int(void) |
| { |
| unsigned long flags; |
| int irq; |
| spin_lock_irqsave(&mips_irq_lock, flags); |
| |
| irq = mips_pcibios_iack(); |
| |
| /* |
| * The only way we can decide if an interrupt is spurious |
| * is by checking the 8259 registers. This needs a spinlock |
| * on an SMP system, so leave it up to the generic code... |
| */ |
| |
| spin_unlock_irqrestore(&mips_irq_lock, flags); |
| |
| return irq; |
| } |
| |
| static void malta_hw0_irqdispatch(void) |
| { |
| int irq; |
| |
| irq = get_int(); |
| if (irq < 0) { |
| return; /* interrupt has already been cleared */ |
| } |
| |
| do_IRQ(MALTA_INT_BASE + irq); |
| } |
| |
| static void corehi_irqdispatch(void) |
| { |
| unsigned int intedge, intsteer, pcicmd, pcibadaddr; |
| unsigned int pcimstat, intisr, inten, intpol; |
| unsigned int intrcause, datalo, datahi; |
| struct pt_regs *regs = get_irq_regs(); |
| |
| printk("CoreHI interrupt, shouldn't happen, so we die here!!!\n"); |
| printk("epc : %08lx\nStatus: %08lx\n" |
| "Cause : %08lx\nbadVaddr : %08lx\n", |
| regs->cp0_epc, regs->cp0_status, |
| regs->cp0_cause, regs->cp0_badvaddr); |
| |
| /* Read all the registers and then print them as there is a |
| problem with interspersed printk's upsetting the Bonito controller. |
| Do it for the others too. |
| */ |
| |
| switch (mips_revision_sconid) { |
| case MIPS_REVISION_SCON_SOCIT: |
| case MIPS_REVISION_SCON_ROCIT: |
| case MIPS_REVISION_SCON_SOCITSC: |
| case MIPS_REVISION_SCON_SOCITSCP: |
| ll_msc_irq(); |
| break; |
| case MIPS_REVISION_SCON_GT64120: |
| intrcause = GT_READ(GT_INTRCAUSE_OFS); |
| datalo = GT_READ(GT_CPUERR_ADDRLO_OFS); |
| datahi = GT_READ(GT_CPUERR_ADDRHI_OFS); |
| printk("GT_INTRCAUSE = %08x\n", intrcause); |
| printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, datalo); |
| break; |
| case MIPS_REVISION_SCON_BONITO: |
| pcibadaddr = BONITO_PCIBADADDR; |
| pcimstat = BONITO_PCIMSTAT; |
| intisr = BONITO_INTISR; |
| inten = BONITO_INTEN; |
| intpol = BONITO_INTPOL; |
| intedge = BONITO_INTEDGE; |
| intsteer = BONITO_INTSTEER; |
| pcicmd = BONITO_PCICMD; |
| printk("BONITO_INTISR = %08x\n", intisr); |
| printk("BONITO_INTEN = %08x\n", inten); |
| printk("BONITO_INTPOL = %08x\n", intpol); |
| printk("BONITO_INTEDGE = %08x\n", intedge); |
| printk("BONITO_INTSTEER = %08x\n", intsteer); |
| printk("BONITO_PCICMD = %08x\n", pcicmd); |
| printk("BONITO_PCIBADADDR = %08x\n", pcibadaddr); |
| printk("BONITO_PCIMSTAT = %08x\n", pcimstat); |
| break; |
| } |
| |
| /* We die here*/ |
| die("CoreHi interrupt", regs); |
| } |
| |
| static inline int clz(unsigned long x) |
| { |
| __asm__( |
| " .set push \n" |
| " .set mips32 \n" |
| " clz %0, %1 \n" |
| " .set pop \n" |
| : "=r" (x) |
| : "r" (x)); |
| |
| return x; |
| } |
| |
| /* |
| * Version of ffs that only looks at bits 12..15. |
| */ |
| static inline unsigned int irq_ffs(unsigned int pending) |
| { |
| #if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) |
| return -clz(pending) + 31 - CAUSEB_IP; |
| #else |
| unsigned int a0 = 7; |
| unsigned int t0; |
| |
| t0 = pending & 0xf000; |
| t0 = t0 < 1; |
| t0 = t0 << 2; |
| a0 = a0 - t0; |
| pending = pending << t0; |
| |
| t0 = pending & 0xc000; |
| t0 = t0 < 1; |
| t0 = t0 << 1; |
| a0 = a0 - t0; |
| pending = pending << t0; |
| |
| t0 = pending & 0x8000; |
| t0 = t0 < 1; |
| //t0 = t0 << 2; |
| a0 = a0 - t0; |
| //pending = pending << t0; |
| |
| return a0; |
| #endif |
| } |
| |
| /* |
| * IRQs on the Malta board look basically (barring software IRQs which we |
| * don't use at all and all external interrupt sources are combined together |
| * on hardware interrupt 0 (MIPS IRQ 2)) like: |
| * |
| * MIPS IRQ Source |
| * -------- ------ |
| * 0 Software (ignored) |
| * 1 Software (ignored) |
| * 2 Combined hardware interrupt (hw0) |
| * 3 Hardware (ignored) |
| * 4 Hardware (ignored) |
| * 5 Hardware (ignored) |
| * 6 Hardware (ignored) |
| * 7 R4k timer (what we use) |
| * |
| * We handle the IRQ according to _our_ priority which is: |
| * |
| * Highest ---- R4k Timer |
| * Lowest ---- Combined hardware interrupt |
| * |
| * then we just return, if multiple IRQs are pending then we will just take |
| * another exception, big deal. |
| */ |
| |
| asmlinkage void plat_irq_dispatch(void) |
| { |
| unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; |
| int irq; |
| |
| irq = irq_ffs(pending); |
| |
| if (irq == MIPSCPU_INT_I8259A) |
| malta_hw0_irqdispatch(); |
| else if (irq >= 0) |
| do_IRQ(MIPS_CPU_IRQ_BASE + irq); |
| else |
| spurious_interrupt(); |
| } |
| |
| static struct irqaction i8259irq = { |
| .handler = no_action, |
| .name = "XT-PIC cascade" |
| }; |
| |
| static struct irqaction corehi_irqaction = { |
| .handler = no_action, |
| .name = "CoreHi" |
| }; |
| |
| msc_irqmap_t __initdata msc_irqmap[] = { |
| {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, |
| {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, |
| }; |
| int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap); |
| |
| msc_irqmap_t __initdata msc_eicirqmap[] = { |
| {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_SMI, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_COREHI, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_CORELO, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0}, |
| {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} |
| }; |
| int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); |
| |
| void __init arch_init_irq(void) |
| { |
| init_i8259_irqs(); |
| |
| if (!cpu_has_veic) |
| mips_cpu_irq_init(); |
| |
| switch(mips_revision_sconid) { |
| case MIPS_REVISION_SCON_SOCIT: |
| case MIPS_REVISION_SCON_ROCIT: |
| if (cpu_has_veic) |
| init_msc_irqs(MIPS_MSC01_IC_REG_BASE, MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs); |
| else |
| init_msc_irqs(MIPS_MSC01_IC_REG_BASE, MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs); |
| break; |
| |
| case MIPS_REVISION_SCON_SOCITSC: |
| case MIPS_REVISION_SCON_SOCITSCP: |
| if (cpu_has_veic) |
| init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs); |
| else |
| init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs); |
| } |
| |
| if (cpu_has_veic) { |
| set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch); |
| set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch); |
| setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq); |
| setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction); |
| } |
| else if (cpu_has_vint) { |
| set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch); |
| set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch); |
| #ifdef CONFIG_MIPS_MT_SMTC |
| setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq, |
| (0x100 << MIPSCPU_INT_I8259A)); |
| setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, |
| &corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI)); |
| /* |
| * Temporary hack to ensure that the subsidiary device |
| * interrupts coing in via the i8259A, but associated |
| * with low IRQ numbers, will restore the Status.IM |
| * value associated with the i8259A. |
| */ |
| { |
| int i; |
| |
| for (i = 0; i < 16; i++) |
| irq_hwmask[i] = (0x100 << MIPSCPU_INT_I8259A); |
| } |
| #else /* Not SMTC */ |
| setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); |
| setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| } |
| else { |
| setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); |
| setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); |
| } |
| } |