of: Always use 'struct device.of_node' to get device node pointer.
The following structure elements duplicate the information in
'struct device.of_node' and so are being eliminated. This patch
makes all readers of these elements use device.of_node instead.
(struct of_device *)->node
(struct dev_archdata *)->prom_node (sparc)
(struct dev_archdata *)->of_node (powerpc & microblaze)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 9c2e100..48d2c1a 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -440,7 +440,7 @@
init_waitqueue_head(&cpm->i2c_wait);
- cpm->irq = of_irq_to_resource(ofdev->node, 0, NULL);
+ cpm->irq = of_irq_to_resource(ofdev->dev.of_node, 0, NULL);
if (cpm->irq == NO_IRQ)
return -EINVAL;
@@ -451,13 +451,13 @@
return ret;
/* I2C parameter RAM */
- i2c_base = of_iomap(ofdev->node, 1);
+ i2c_base = of_iomap(ofdev->dev.of_node, 1);
if (i2c_base == NULL) {
ret = -EINVAL;
goto out_irq;
}
- if (of_device_is_compatible(ofdev->node, "fsl,cpm1-i2c")) {
+ if (of_device_is_compatible(ofdev->dev.of_node, "fsl,cpm1-i2c")) {
/* Check for and use a microcode relocation patch. */
cpm->i2c_ram = i2c_base;
@@ -474,7 +474,7 @@
cpm->version = 1;
- } else if (of_device_is_compatible(ofdev->node, "fsl,cpm2-i2c")) {
+ } else if (of_device_is_compatible(ofdev->dev.of_node, "fsl,cpm2-i2c")) {
cpm->i2c_addr = cpm_muram_alloc(sizeof(struct i2c_ram), 64);
cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr);
out_be16(i2c_base, cpm->i2c_addr);
@@ -489,24 +489,24 @@
}
/* I2C control/status registers */
- cpm->i2c_reg = of_iomap(ofdev->node, 0);
+ cpm->i2c_reg = of_iomap(ofdev->dev.of_node, 0);
if (cpm->i2c_reg == NULL) {
ret = -EINVAL;
goto out_ram;
}
- data = of_get_property(ofdev->node, "fsl,cpm-command", &len);
+ data = of_get_property(ofdev->dev.of_node, "fsl,cpm-command", &len);
if (!data || len != 4) {
ret = -EINVAL;
goto out_reg;
}
cpm->cp_command = *data;
- data = of_get_property(ofdev->node, "linux,i2c-class", &len);
+ data = of_get_property(ofdev->dev.of_node, "linux,i2c-class", &len);
if (data && len == 4)
cpm->adap.class = *data;
- data = of_get_property(ofdev->node, "clock-frequency", &len);
+ data = of_get_property(ofdev->dev.of_node, "clock-frequency", &len);
if (data && len == 4)
cpm->freq = *data;
else
@@ -661,7 +661,7 @@
/* register new adapter to i2c module... */
- data = of_get_property(ofdev->node, "linux,i2c-index", &len);
+ data = of_get_property(ofdev->dev.of_node, "linux,i2c-index", &len);
if (data && len == 4) {
cpm->adap.nr = *data;
result = i2c_add_numbered_adapter(&cpm->adap);
@@ -679,7 +679,7 @@
/*
* register OF I2C devices
*/
- of_register_i2c_devices(&cpm->adap, ofdev->node);
+ of_register_i2c_devices(&cpm->adap, ofdev->dev.of_node);
return 0;
out_shut: