poll: allow f_op->poll to sleep
f_op->poll is the only vfs operation which is not allowed to sleep. It's
because poll and select implementation used task state to synchronize
against wake ups, which doesn't have to be the case anymore as wait/wake
interface can now use custom wake up functions. The non-sleep restriction
can be a bit tricky because ->poll is not called from an atomic context
and the result of accidentally sleeping in ->poll only shows up as
temporary busy looping when the timing is right or rather wrong.
This patch converts poll/select to use custom wake up function and use
separate triggered variable to synchronize against wake up events. The
only added overhead is an extra function call during wake up and
negligible.
This patch removes the one non-sleep exception from vfs locking rules and
is beneficial to userland filesystem implementations like FUSE, 9p or
peculiar fs like spufs as it's very difficult for those to implement
non-sleeping poll method.
While at it, make the following cosmetic changes to make poll.h and
select.c checkpatch friendly.
* s/type * symbol/type *symbol/ : three places in poll.h
* remove blank line before EXPORT_SYMBOL() : two places in select.c
Oleg: spotted missing barrier in poll_schedule_timeout()
Davide: spotted missing write barrier in pollwake()
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Brad Boyer <flar@allandria.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Roland McGrath <roland@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/fs/select.c b/fs/select.c
index 87df51e..08b91be 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -109,11 +109,11 @@
void poll_initwait(struct poll_wqueues *pwq)
{
init_poll_funcptr(&pwq->pt, __pollwait);
+ pwq->polling_task = current;
pwq->error = 0;
pwq->table = NULL;
pwq->inline_index = 0;
}
-
EXPORT_SYMBOL(poll_initwait);
static void free_poll_entry(struct poll_table_entry *entry)
@@ -142,12 +142,10 @@
free_page((unsigned long) old);
}
}
-
EXPORT_SYMBOL(poll_freewait);
-static struct poll_table_entry *poll_get_entry(poll_table *_p)
+static struct poll_table_entry *poll_get_entry(struct poll_wqueues *p)
{
- struct poll_wqueues *p = container_of(_p, struct poll_wqueues, pt);
struct poll_table_page *table = p->table;
if (p->inline_index < N_INLINE_POLL_ENTRIES)
@@ -159,7 +157,6 @@
new_table = (struct poll_table_page *) __get_free_page(GFP_KERNEL);
if (!new_table) {
p->error = -ENOMEM;
- __set_current_state(TASK_RUNNING);
return NULL;
}
new_table->entry = new_table->entries;
@@ -171,20 +168,75 @@
return table->entry++;
}
+static int pollwake(wait_queue_t *wait, unsigned mode, int sync, void *key)
+{
+ struct poll_wqueues *pwq = wait->private;
+ DECLARE_WAITQUEUE(dummy_wait, pwq->polling_task);
+
+ /*
+ * Although this function is called under waitqueue lock, LOCK
+ * doesn't imply write barrier and the users expect write
+ * barrier semantics on wakeup functions. The following
+ * smp_wmb() is equivalent to smp_wmb() in try_to_wake_up()
+ * and is paired with set_mb() in poll_schedule_timeout.
+ */
+ smp_wmb();
+ pwq->triggered = 1;
+
+ /*
+ * Perform the default wake up operation using a dummy
+ * waitqueue.
+ *
+ * TODO: This is hacky but there currently is no interface to
+ * pass in @sync. @sync is scheduled to be removed and once
+ * that happens, wake_up_process() can be used directly.
+ */
+ return default_wake_function(&dummy_wait, mode, sync, key);
+}
+
/* Add a new entry */
static void __pollwait(struct file *filp, wait_queue_head_t *wait_address,
poll_table *p)
{
- struct poll_table_entry *entry = poll_get_entry(p);
+ struct poll_wqueues *pwq = container_of(p, struct poll_wqueues, pt);
+ struct poll_table_entry *entry = poll_get_entry(pwq);
if (!entry)
return;
get_file(filp);
entry->filp = filp;
entry->wait_address = wait_address;
- init_waitqueue_entry(&entry->wait, current);
+ init_waitqueue_func_entry(&entry->wait, pollwake);
+ entry->wait.private = pwq;
add_wait_queue(wait_address, &entry->wait);
}
+int poll_schedule_timeout(struct poll_wqueues *pwq, int state,
+ ktime_t *expires, unsigned long slack)
+{
+ int rc = -EINTR;
+
+ set_current_state(state);
+ if (!pwq->triggered)
+ rc = schedule_hrtimeout_range(expires, slack, HRTIMER_MODE_ABS);
+ __set_current_state(TASK_RUNNING);
+
+ /*
+ * Prepare for the next iteration.
+ *
+ * The following set_mb() serves two purposes. First, it's
+ * the counterpart rmb of the wmb in pollwake() such that data
+ * written before wake up is always visible after wake up.
+ * Second, the full barrier guarantees that triggered clearing
+ * doesn't pass event check of the next iteration. Note that
+ * this problem doesn't exist for the first iteration as
+ * add_wait_queue() has full barrier semantics.
+ */
+ set_mb(pwq->triggered, 0);
+
+ return rc;
+}
+EXPORT_SYMBOL(poll_schedule_timeout);
+
/**
* poll_select_set_timeout - helper function to setup the timeout value
* @to: pointer to timespec variable for the final timeout
@@ -340,8 +392,6 @@
for (;;) {
unsigned long *rinp, *routp, *rexp, *inp, *outp, *exp;
- set_current_state(TASK_INTERRUPTIBLE);
-
inp = fds->in; outp = fds->out; exp = fds->ex;
rinp = fds->res_in; routp = fds->res_out; rexp = fds->res_ex;
@@ -411,10 +461,10 @@
to = &expire;
}
- if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
+ if (!poll_schedule_timeout(&table, TASK_INTERRUPTIBLE,
+ to, slack))
timed_out = 1;
}
- __set_current_state(TASK_RUNNING);
poll_freewait(&table);
@@ -666,7 +716,6 @@
for (;;) {
struct poll_list *walk;
- set_current_state(TASK_INTERRUPTIBLE);
for (walk = list; walk != NULL; walk = walk->next) {
struct pollfd * pfd, * pfd_end;
@@ -709,10 +758,9 @@
to = &expire;
}
- if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
+ if (!poll_schedule_timeout(wait, TASK_INTERRUPTIBLE, to, slack))
timed_out = 1;
}
- __set_current_state(TASK_RUNNING);
return count;
}