extcon: arizona: Clear _trig_sts bits after jack detection
It is important to clear the wake trigger status bits otherwise DCVDD
will be held high independent of the state of the LDOENA line.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index cfd206c..aeaf217 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -939,6 +939,13 @@
ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB);
}
+ /* Clear trig_sts to make sure DCVDD is not forced up */
+ regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG,
+ ARIZONA_MICD_CLAMP_FALL_TRIG_STS |
+ ARIZONA_MICD_CLAMP_RISE_TRIG_STS |
+ ARIZONA_JD1_FALL_TRIG_STS |
+ ARIZONA_JD1_RISE_TRIG_STS);
+
mutex_unlock(&info->lock);
pm_runtime_mark_last_busy(info->dev);
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index 79e9dd4..188d89a 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -5267,6 +5267,14 @@
/*
* R3408 (0xD50) - AOD wkup and trig
*/
+#define ARIZONA_MICD_CLAMP_FALL_TRIG_STS 0x0080 /* MICD_CLAMP_FALL_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_FALL_TRIG_STS_MASK 0x0080 /* MICD_CLAMP_FALL_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_FALL_TRIG_STS_SHIFT 7 /* MICD_CLAMP_FALL_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_FALL_TRIG_STS_WIDTH 1 /* MICD_CLAMP_FALL_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_RISE_TRIG_STS 0x0040 /* MICD_CLAMP_RISE_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_RISE_TRIG_STS_MASK 0x0040 /* MICD_CLAMP_RISE_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_RISE_TRIG_STS_SHIFT 6 /* MICD_CLAMP_RISE_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_RISE_TRIG_STS_WIDTH 1 /* MICD_CLAMP_RISE_TRIG_STS */
#define ARIZONA_GP5_FALL_TRIG_STS 0x0020 /* GP5_FALL_TRIG_STS */
#define ARIZONA_GP5_FALL_TRIG_STS_MASK 0x0020 /* GP5_FALL_TRIG_STS */
#define ARIZONA_GP5_FALL_TRIG_STS_SHIFT 5 /* GP5_FALL_TRIG_STS */