V4L/DVB (10805): Add support for NetUP Dual DVB-S2 CI card
Add support for NetUP Dual DVB-S2 CI card
The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips,
STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator.
http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index 00f1e2e..b62f16d 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -16,6 +16,7 @@
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
+ select DVB_LNBP21 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
diff --git a/drivers/media/video/cx23885/Makefile b/drivers/media/video/cx23885/Makefile
index 29c23b4..ab8ea35 100644
--- a/drivers/media/video/cx23885/Makefile
+++ b/drivers/media/video/cx23885/Makefile
@@ -1,4 +1,6 @@
-cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o
+cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o \
+ cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o \
+ netup-init.o cimax2.o netup-eeprom.o
obj-$(CONFIG_VIDEO_CX23885) += cx23885.o
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 7ff339a..08cd793 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -27,6 +27,7 @@
#include "cx23885.h"
#include "tuner-xc2028.h"
+#include "netup-init.h"
/* ------------------------------------------------------------------ */
/* board config info */
@@ -174,6 +175,12 @@
.name = "DVBWorld DVB-S2 2005",
.portb = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = {
+ .cimax = 1,
+ .name = "NetUP Dual DVB-S2 CI",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -269,6 +276,10 @@
.subvendor = 0x0001,
.subdevice = 0x2005,
.card = CX23885_BOARD_DVBWORLD_2005,
+ }, {
+ .subvendor = 0x1b55,
+ .subdevice = 0x2a2c,
+ .card = CX23885_BOARD_NETUP_DUAL_DVBS2_CI,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -582,6 +593,32 @@
cx_write(MC417_OEN, 0x00001000);
cx_write(MC417_RWD, 0x00001800);
break;
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ /* GPIO-0 INTA from CiMax1
+ GPIO-1 INTB from CiMax2
+ GPIO-2 reset chips
+ GPIO-3 to GPIO-10 data/addr for CA
+ GPIO-11 ~CS0 to CiMax1
+ GPIO-12 ~CS1 to CiMax2
+ GPIO-13 ADL0 load LSB addr
+ GPIO-14 ADL1 load MSB addr
+ GPIO-15 ~RDY from CiMax
+ GPIO-17 ~RD to CiMax
+ GPIO-18 ~WR to CiMax
+ */
+ cx_set(GP0_IO, 0x00040000); /* GPIO as out */
+ /* GPIO1 and GPIO2 as INTA and INTB from CiMaxes, reset low */
+ cx_clear(GP0_IO, 0x00030004);
+ mdelay(100);/* reset delay */
+ cx_set(GP0_IO, 0x00040004); /* GPIO as out, reset high */
+ cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */
+ /* GPIO-15 IN as ~ACK, rest as OUT */
+ cx_write(MC417_OEN, 0x00001000);
+ /* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */
+ cx_write(MC417_RWD, 0x0000c300);
+ /* enable irq */
+ cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
+ break;
}
}
@@ -669,6 +706,14 @@
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
@@ -693,9 +738,17 @@
case CX23885_BOARD_HAUPPAUGE_HVR1700:
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
request_module("cx25840");
break;
}
+
+ /* AUX-PLL 27MHz CLK */
+ switch (dev->board) {
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ netup_initialize(dev);
+ break;
+ }
}
/* ------------------------------------------------------------------ */
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 8f6fb2a..1b40145 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -31,6 +31,7 @@
#include <asm/div64.h>
#include "cx23885.h"
+#include "cimax2.h"
MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
@@ -791,6 +792,8 @@
dev->pci_bus = dev->pci->bus->number;
dev->pci_slot = PCI_SLOT(dev->pci->devfn);
dev->pci_irqmask = 0x001f00;
+ if (cx23885_boards[dev->board].cimax > 0)
+ dev->pci_irqmask |= 0x01800000; /* for CiMaxes */
/* External Master 1 Bus */
dev->i2c_bus[0].nr = 0;
@@ -1643,7 +1646,9 @@
(pci_status & PCI_MSK_VID_B) ||
(pci_status & PCI_MSK_VID_A) ||
(pci_status & PCI_MSK_AUD_INT) ||
- (pci_status & PCI_MSK_AUD_EXT)) {
+ (pci_status & PCI_MSK_AUD_EXT) ||
+ (pci_status & PCI_MSK_GPIO0) ||
+ (pci_status & PCI_MSK_GPIO1)) {
if (pci_status & PCI_MSK_RISC_RD)
dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n",
@@ -1685,8 +1690,19 @@
dprintk(7, " (PCI_MSK_AUD_EXT 0x%08x)\n",
PCI_MSK_AUD_EXT);
+ if (pci_status & PCI_MSK_GPIO0)
+ dprintk(7, " (PCI_MSK_GPIO0 0x%08x)\n",
+ PCI_MSK_GPIO0);
+
+ if (pci_status & PCI_MSK_GPIO1)
+ dprintk(7, " (PCI_MSK_GPIO1 0x%08x)\n",
+ PCI_MSK_GPIO1);
}
+ if ((pci_status & PCI_MSK_GPIO0) || (pci_status & PCI_MSK_GPIO1))
+ /* handled += cx23885_irq_gpio(dev, pci_status); */
+ handled += netup_ci_slot_status(dev, pci_status);
+
if (ts1_status) {
if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB)
handled += cx23885_irq_ts(ts1, ts1_status);
@@ -1759,6 +1775,8 @@
}
pci_set_drvdata(pci_dev, dev);
+ cx_set(PCI_INT_MSK, 0x01800000); /* for NetUP */
+
return 0;
fail_irq:
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 14a6540..9a0bc6e 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -30,6 +30,7 @@
#include "cx23885.h"
#include <media/v4l2-common.h>
+#include "dvb_ca_en50221.h"
#include "s5h1409.h"
#include "s5h1411.h"
#include "mt2131.h"
@@ -43,7 +44,13 @@
#include "dib7000p.h"
#include "dibx000_common.h"
#include "zl10353.h"
+#include "stv0900.h"
+#include "stv6110.h"
+#include "lnbh24.h"
#include "cx24116.h"
+#include "cimax2.h"
+#include "netup-eeprom.h"
+#include "netup-init.h"
static unsigned int debug;
@@ -309,6 +316,31 @@
.no_tuner = 1,
};
+static struct stv0900_config netup_stv0900_config = {
+ .demod_address = 0x68,
+ .xtal = 27000000,
+ .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+ .diseqc_mode = 2,/* 2/3 PWM */
+ .path1_mode = 2,/*Serial continues clock */
+ .path2_mode = 2,/*Serial continues clock */
+ .tun1_maddress = 0,/* 0x60 */
+ .tun2_maddress = 3,/* 0x63 */
+ .tun1_adc = 1,/* 1 Vpp */
+ .tun2_adc = 1,/* 1 Vpp */
+};
+
+static struct stv6110_config netup_stv6110_tunerconfig_a = {
+ .i2c_address = 0x60,
+ .mclk = 27000000,
+ .iq_wiring = 0,
+};
+
+static struct stv6110_config netup_stv6110_tunerconfig_b = {
+ .i2c_address = 0x63,
+ .mclk = 27000000,
+ .iq_wiring = 1,
+};
+
static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct cx23885_tsport *port = fe->dvb->priv;
@@ -340,6 +372,7 @@
struct cx23885_dev *dev = port->dev;
struct cx23885_i2c *i2c_bus = NULL;
struct videobuf_dvb_frontend *fe0;
+ int ret;
/* Get the first frontend */
fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
@@ -580,6 +613,51 @@
&dvbworld_cx24116_config,
&i2c_bus->i2c_adap);
break;
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ i2c_bus = &dev->i2c_bus[0];
+ switch (port->nr) {
+ /* port B */
+ case 1:
+ fe0->dvb.frontend = dvb_attach(stv0900_attach,
+ &netup_stv0900_config,
+ &i2c_bus->i2c_adap, 0);
+ if (fe0->dvb.frontend != NULL) {
+ if (dvb_attach(stv6110_attach,
+ fe0->dvb.frontend,
+ &netup_stv6110_tunerconfig_a,
+ &i2c_bus->i2c_adap)) {
+ if (!dvb_attach(lnbh24_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ LNBH24_PCL, 0, 0x09))
+ printk(KERN_ERR
+ "No LNBH24 found!\n");
+
+ }
+ }
+ break;
+ /* port C */
+ case 2:
+ fe0->dvb.frontend = dvb_attach(stv0900_attach,
+ &netup_stv0900_config,
+ &i2c_bus->i2c_adap, 1);
+ if (fe0->dvb.frontend != NULL) {
+ if (dvb_attach(stv6110_attach,
+ fe0->dvb.frontend,
+ &netup_stv6110_tunerconfig_b,
+ &i2c_bus->i2c_adap)) {
+ if (!dvb_attach(lnbh24_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ LNBH24_PCL, 0, 0x0a))
+ printk(KERN_ERR
+ "No LNBH24 found!\n");
+
+ }
+ }
+ break;
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
@@ -601,9 +679,33 @@
fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
/* register everything */
- return videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
+ ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
&dev->pci->dev, adapter_nr, 0);
+ /* init CI & MAC */
+ switch (dev->board) {
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
+ static struct netup_card_info cinfo;
+
+ netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
+ memcpy(port->frontends.adapter.proposed_mac,
+ cinfo.port[port->nr - 1].mac, 6);
+ printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC="
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ port->nr,
+ port->frontends.adapter.proposed_mac[0],
+ port->frontends.adapter.proposed_mac[1],
+ port->frontends.adapter.proposed_mac[2],
+ port->frontends.adapter.proposed_mac[3],
+ port->frontends.adapter.proposed_mac[4],
+ port->frontends.adapter.proposed_mac[5]);
+
+ netup_ci_init(port);
+ break;
+ }
+ }
+
+ return ret;
}
int cx23885_dvb_register(struct cx23885_tsport *port)
@@ -676,6 +778,8 @@
if (fe0->dvb.frontend)
videobuf_dvb_unregister_bus(&port->frontends);
+ netup_ci_exit(port);
+
return 0;
}
diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h
index 20b68a2..eafbe52 100644
--- a/drivers/media/video/cx23885/cx23885-reg.h
+++ b/drivers/media/video/cx23885/cx23885-reg.h
@@ -212,6 +212,8 @@
#define DEV_CNTRL2 0x00040000
+#define PCI_MSK_GPIO1 (1 << 24)
+#define PCI_MSK_GPIO0 (1 << 23)
#define PCI_MSK_APB_DMA (1 << 12)
#define PCI_MSK_AL_WR (1 << 11)
#define PCI_MSK_AL_RD (1 << 10)
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 37a88b1..779fc35 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -70,6 +70,7 @@
#define CX23885_BOARD_TBS_6920 14
#define CX23885_BOARD_TEVII_S470 15
#define CX23885_BOARD_DVBWORLD_2005 16
+#define CX23885_BOARD_NETUP_DUAL_DVBS2_CI 17
/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
#define CX23885_NORMS (\
@@ -187,6 +188,7 @@
*/
u32 clk_freq;
struct cx23885_input input[MAX_CX23885_INPUT];
+ int cimax; /* for NetUP */
};
struct cx23885_subid {
@@ -269,6 +271,7 @@
/* Allow a single tsport to have multiple frontends */
u32 num_frontends;
+ void *port_priv;
};
struct cx23885_dev {