| /* |
| * Copyright (C) 2008-2009 Texas Instruments Inc |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * Driver name : VPFE Capture driver |
| * VPFE Capture driver allows applications to capture and stream video |
| * frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as |
| * TVP5146 or Raw Bayer RGB image data from an image sensor |
| * such as Microns' MT9T001, MT9T031 etc. |
| * |
| * These SoCs have, in common, a Video Processing Subsystem (VPSS) that |
| * consists of a Video Processing Front End (VPFE) for capturing |
| * video/raw image data and Video Processing Back End (VPBE) for displaying |
| * YUV data through an in-built analog encoder or Digital LCD port. This |
| * driver is for capture through VPFE. A typical EVM using these SoCs have |
| * following high level configuration. |
| * |
| * |
| * decoder(TVP5146/ YUV/ |
| * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF) |
| * data input | | |
| * V | |
| * SDRAM | |
| * V |
| * Image Processor |
| * | |
| * V |
| * SDRAM |
| * The data flow happens from a decoder connected to the VPFE over a |
| * YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface |
| * and to the input of VPFE through an optional MUX (if more inputs are |
| * to be interfaced on the EVM). The input data is first passed through |
| * CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC |
| * does very little or no processing on YUV data and does pre-process Raw |
| * Bayer RGB data through modules such as Defect Pixel Correction (DFC) |
| * Color Space Conversion (CSC), data gain/offset etc. After this, data |
| * can be written to SDRAM or can be connected to the image processing |
| * block such as IPIPE (on DM355 only). |
| * |
| * Features supported |
| * - MMAP IO |
| * - Capture using TVP5146 over BT.656 |
| * - support for interfacing decoders using sub device model |
| * - Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV |
| * data capture to SDRAM. |
| * TODO list |
| * - Support multiple REQBUF after open |
| * - Support for de-allocating buffers through REQBUF |
| * - Support for Raw Bayer RGB capture |
| * - Support for chaining Image Processor |
| * - Support for static allocation of buffers |
| * - Support for USERPTR IO |
| * - Support for STREAMON before QBUF |
| * - Support for control ioctls |
| */ |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <media/v4l2-common.h> |
| #include <linux/io.h> |
| #include <media/davinci/vpfe_capture.h> |
| #include "ccdc_hw_device.h" |
| |
| static int debug; |
| static u32 numbuffers = 3; |
| static u32 bufsize = (720 * 576 * 2); |
| |
| module_param(numbuffers, uint, S_IRUGO); |
| module_param(bufsize, uint, S_IRUGO); |
| module_param(debug, int, 0644); |
| |
| MODULE_PARM_DESC(numbuffers, "buffer count (default:3)"); |
| MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)"); |
| MODULE_PARM_DESC(debug, "Debug level 0-1"); |
| |
| MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Texas Instruments"); |
| |
| /* standard information */ |
| struct vpfe_standard { |
| v4l2_std_id std_id; |
| unsigned int width; |
| unsigned int height; |
| struct v4l2_fract pixelaspect; |
| /* 0 - progressive, 1 - interlaced */ |
| int frame_format; |
| }; |
| |
| /* ccdc configuration */ |
| struct ccdc_config { |
| /* This make sure vpfe is probed and ready to go */ |
| int vpfe_probed; |
| /* name of ccdc device */ |
| char name[32]; |
| }; |
| |
| /* data structures */ |
| static struct vpfe_config_params config_params = { |
| .min_numbuffers = 3, |
| .numbuffers = 3, |
| .min_bufsize = 720 * 480 * 2, |
| .device_bufsize = 720 * 576 * 2, |
| }; |
| |
| /* ccdc device registered */ |
| static struct ccdc_hw_device *ccdc_dev; |
| /* lock for accessing ccdc information */ |
| static DEFINE_MUTEX(ccdc_lock); |
| /* ccdc configuration */ |
| static struct ccdc_config *ccdc_cfg; |
| |
| const struct vpfe_standard vpfe_standards[] = { |
| {V4L2_STD_525_60, 720, 480, {11, 10}, 1}, |
| {V4L2_STD_625_50, 720, 576, {54, 59}, 1}, |
| }; |
| |
| /* Used when raw Bayer image from ccdc is directly captured to SDRAM */ |
| static const struct vpfe_pixel_format vpfe_pix_fmts[] = { |
| { |
| .fmtdesc = { |
| .index = 0, |
| .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| .description = "Bayer GrRBGb 8bit A-Law compr.", |
| .pixelformat = V4L2_PIX_FMT_SBGGR8, |
| }, |
| .bpp = 1, |
| }, |
| { |
| .fmtdesc = { |
| .index = 1, |
| .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| .description = "Bayer GrRBGb - 16bit", |
| .pixelformat = V4L2_PIX_FMT_SBGGR16, |
| }, |
| .bpp = 2, |
| }, |
| { |
| .fmtdesc = { |
| .index = 2, |
| .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| .description = "Bayer GrRBGb 8bit DPCM compr.", |
| .pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8, |
| }, |
| .bpp = 1, |
| }, |
| { |
| .fmtdesc = { |
| .index = 3, |
| .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| .description = "YCbCr 4:2:2 Interleaved UYVY", |
| .pixelformat = V4L2_PIX_FMT_UYVY, |
| }, |
| .bpp = 2, |
| }, |
| { |
| .fmtdesc = { |
| .index = 4, |
| .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| .description = "YCbCr 4:2:2 Interleaved YUYV", |
| .pixelformat = V4L2_PIX_FMT_YUYV, |
| }, |
| .bpp = 2, |
| }, |
| { |
| .fmtdesc = { |
| .index = 5, |
| .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| .description = "Y/CbCr 4:2:0 - Semi planar", |
| .pixelformat = V4L2_PIX_FMT_NV12, |
| }, |
| .bpp = 1, |
| }, |
| }; |
| |
| /* |
| * vpfe_lookup_pix_format() |
| * lookup an entry in the vpfe pix format table based on pix_format |
| */ |
| static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) { |
| if (pix_format == vpfe_pix_fmts[i].fmtdesc.pixelformat) |
| return &vpfe_pix_fmts[i]; |
| } |
| return NULL; |
| } |
| |
| /* |
| * vpfe_register_ccdc_device. CCDC module calls this to |
| * register with vpfe capture |
| */ |
| int vpfe_register_ccdc_device(struct ccdc_hw_device *dev) |
| { |
| int ret = 0; |
| printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name); |
| |
| BUG_ON(!dev->hw_ops.open); |
| BUG_ON(!dev->hw_ops.enable); |
| BUG_ON(!dev->hw_ops.set_hw_if_params); |
| BUG_ON(!dev->hw_ops.configure); |
| BUG_ON(!dev->hw_ops.set_buftype); |
| BUG_ON(!dev->hw_ops.get_buftype); |
| BUG_ON(!dev->hw_ops.enum_pix); |
| BUG_ON(!dev->hw_ops.set_frame_format); |
| BUG_ON(!dev->hw_ops.get_frame_format); |
| BUG_ON(!dev->hw_ops.get_pixel_format); |
| BUG_ON(!dev->hw_ops.set_pixel_format); |
| BUG_ON(!dev->hw_ops.set_params); |
| BUG_ON(!dev->hw_ops.set_image_window); |
| BUG_ON(!dev->hw_ops.get_image_window); |
| BUG_ON(!dev->hw_ops.get_line_length); |
| BUG_ON(!dev->hw_ops.getfid); |
| |
| mutex_lock(&ccdc_lock); |
| if (NULL == ccdc_cfg) { |
| /* |
| * TODO. Will this ever happen? if so, we need to fix it. |
| * Proabably we need to add the request to a linked list and |
| * walk through it during vpfe probe |
| */ |
| printk(KERN_ERR "vpfe capture not initialized\n"); |
| ret = -EFAULT; |
| goto unlock; |
| } |
| |
| if (strcmp(dev->name, ccdc_cfg->name)) { |
| /* ignore this ccdc */ |
| ret = -EINVAL; |
| goto unlock; |
| } |
| |
| if (ccdc_dev) { |
| printk(KERN_ERR "ccdc already registered\n"); |
| ret = -EINVAL; |
| goto unlock; |
| } |
| |
| ccdc_dev = dev; |
| unlock: |
| mutex_unlock(&ccdc_lock); |
| return ret; |
| } |
| EXPORT_SYMBOL(vpfe_register_ccdc_device); |
| |
| /* |
| * vpfe_unregister_ccdc_device. CCDC module calls this to |
| * unregister with vpfe capture |
| */ |
| void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev) |
| { |
| if (NULL == dev) { |
| printk(KERN_ERR "invalid ccdc device ptr\n"); |
| return; |
| } |
| |
| printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n", |
| dev->name); |
| |
| if (strcmp(dev->name, ccdc_cfg->name)) { |
| /* ignore this ccdc */ |
| return; |
| } |
| |
| mutex_lock(&ccdc_lock); |
| ccdc_dev = NULL; |
| mutex_unlock(&ccdc_lock); |
| return; |
| } |
| EXPORT_SYMBOL(vpfe_unregister_ccdc_device); |
| |
| /* |
| * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings |
| */ |
| static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev, |
| struct v4l2_format *f) |
| { |
| struct v4l2_rect image_win; |
| enum ccdc_buftype buf_type; |
| enum ccdc_frmfmt frm_fmt; |
| |
| memset(f, 0, sizeof(*f)); |
| f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; |
| ccdc_dev->hw_ops.get_image_window(&image_win); |
| f->fmt.pix.width = image_win.width; |
| f->fmt.pix.height = image_win.height; |
| f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length(); |
| f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * |
| f->fmt.pix.height; |
| buf_type = ccdc_dev->hw_ops.get_buftype(); |
| f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format(); |
| frm_fmt = ccdc_dev->hw_ops.get_frame_format(); |
| if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE) |
| f->fmt.pix.field = V4L2_FIELD_NONE; |
| else if (frm_fmt == CCDC_FRMFMT_INTERLACED) { |
| if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) |
| f->fmt.pix.field = V4L2_FIELD_INTERLACED; |
| else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED) |
| f->fmt.pix.field = V4L2_FIELD_SEQ_TB; |
| else { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type\n"); |
| return -EINVAL; |
| } |
| } else { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt\n"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* |
| * vpfe_config_ccdc_image_format() |
| * For a pix format, configure ccdc to setup the capture |
| */ |
| static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev) |
| { |
| enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED; |
| int ret = 0; |
| |
| if (ccdc_dev->hw_ops.set_pixel_format( |
| vpfe_dev->fmt.fmt.pix.pixelformat) < 0) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "couldn't set pix format in ccdc\n"); |
| return -EINVAL; |
| } |
| /* configure the image window */ |
| ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop); |
| |
| switch (vpfe_dev->fmt.fmt.pix.field) { |
| case V4L2_FIELD_INTERLACED: |
| /* do nothing, since it is default */ |
| ret = ccdc_dev->hw_ops.set_buftype( |
| CCDC_BUFTYPE_FLD_INTERLEAVED); |
| break; |
| case V4L2_FIELD_NONE: |
| frm_fmt = CCDC_FRMFMT_PROGRESSIVE; |
| /* buffer type only applicable for interlaced scan */ |
| break; |
| case V4L2_FIELD_SEQ_TB: |
| ret = ccdc_dev->hw_ops.set_buftype( |
| CCDC_BUFTYPE_FLD_SEPARATED); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* set the frame format */ |
| if (!ret) |
| ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt); |
| return ret; |
| } |
| /* |
| * vpfe_config_image_format() |
| * For a given standard, this functions sets up the default |
| * pix format & crop values in the vpfe device and ccdc. It first |
| * starts with defaults based values from the standard table. |
| * It then checks if sub device support g_fmt and then override the |
| * values based on that.Sets crop values to match with scan resolution |
| * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the |
| * values in ccdc |
| */ |
| static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, |
| const v4l2_std_id *std_id) |
| { |
| struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev; |
| int i, ret = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) { |
| if (vpfe_standards[i].std_id & *std_id) { |
| vpfe_dev->std_info.active_pixels = |
| vpfe_standards[i].width; |
| vpfe_dev->std_info.active_lines = |
| vpfe_standards[i].height; |
| vpfe_dev->std_info.frame_format = |
| vpfe_standards[i].frame_format; |
| vpfe_dev->std_index = i; |
| break; |
| } |
| } |
| |
| if (i == ARRAY_SIZE(vpfe_standards)) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n"); |
| return -EINVAL; |
| } |
| |
| vpfe_dev->crop.top = 0; |
| vpfe_dev->crop.left = 0; |
| vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels; |
| vpfe_dev->crop.height = vpfe_dev->std_info.active_lines; |
| vpfe_dev->fmt.fmt.pix.width = vpfe_dev->crop.width; |
| vpfe_dev->fmt.fmt.pix.height = vpfe_dev->crop.height; |
| |
| /* first field and frame format based on standard frame format */ |
| if (vpfe_dev->std_info.frame_format) { |
| vpfe_dev->fmt.fmt.pix.field = V4L2_FIELD_INTERLACED; |
| /* assume V4L2_PIX_FMT_UYVY as default */ |
| vpfe_dev->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; |
| } else { |
| vpfe_dev->fmt.fmt.pix.field = V4L2_FIELD_NONE; |
| /* assume V4L2_PIX_FMT_SBGGR8 */ |
| vpfe_dev->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_SBGGR8; |
| } |
| |
| /* if sub device supports g_fmt, override the defaults */ |
| ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, |
| sdinfo->grp_id, video, g_fmt, &vpfe_dev->fmt); |
| |
| if (ret && ret != -ENOIOCTLCMD) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "error in getting g_fmt from sub device\n"); |
| return ret; |
| } |
| |
| /* Sets the values in CCDC */ |
| ret = vpfe_config_ccdc_image_format(vpfe_dev); |
| if (ret) |
| return ret; |
| |
| /* Update the values of sizeimage and bytesperline */ |
| if (!ret) { |
| vpfe_dev->fmt.fmt.pix.bytesperline = |
| ccdc_dev->hw_ops.get_line_length(); |
| vpfe_dev->fmt.fmt.pix.sizeimage = |
| vpfe_dev->fmt.fmt.pix.bytesperline * |
| vpfe_dev->fmt.fmt.pix.height; |
| } |
| return ret; |
| } |
| |
| static int vpfe_initialize_device(struct vpfe_device *vpfe_dev) |
| { |
| int ret = 0; |
| |
| /* set first input of current subdevice as the current input */ |
| vpfe_dev->current_input = 0; |
| |
| /* set default standard */ |
| vpfe_dev->std_index = 0; |
| |
| /* Configure the default format information */ |
| ret = vpfe_config_image_format(vpfe_dev, |
| &vpfe_standards[vpfe_dev->std_index].std_id); |
| if (ret) |
| return ret; |
| |
| /* now open the ccdc device to initialize it */ |
| mutex_lock(&ccdc_lock); |
| if (NULL == ccdc_dev) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n"); |
| ret = -ENODEV; |
| goto unlock; |
| } |
| |
| if (!try_module_get(ccdc_dev->owner)) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n"); |
| ret = -ENODEV; |
| goto unlock; |
| } |
| ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev); |
| if (!ret) |
| vpfe_dev->initialized = 1; |
| unlock: |
| mutex_unlock(&ccdc_lock); |
| return ret; |
| } |
| |
| /* |
| * vpfe_open : It creates object of file handle structure and |
| * stores it in private_data member of filepointer |
| */ |
| static int vpfe_open(struct file *file) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_fh *fh; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n"); |
| |
| if (!vpfe_dev->cfg->num_subdevs) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n"); |
| return -ENODEV; |
| } |
| |
| /* Allocate memory for the file handle object */ |
| fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL); |
| if (NULL == fh) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "unable to allocate memory for file handle object\n"); |
| return -ENOMEM; |
| } |
| /* store pointer to fh in private_data member of file */ |
| file->private_data = fh; |
| fh->vpfe_dev = vpfe_dev; |
| mutex_lock(&vpfe_dev->lock); |
| /* If decoder is not initialized. initialize it */ |
| if (!vpfe_dev->initialized) { |
| if (vpfe_initialize_device(vpfe_dev)) { |
| mutex_unlock(&vpfe_dev->lock); |
| return -ENODEV; |
| } |
| } |
| /* Increment device usrs counter */ |
| vpfe_dev->usrs++; |
| /* Set io_allowed member to false */ |
| fh->io_allowed = 0; |
| /* Initialize priority of this instance to default priority */ |
| fh->prio = V4L2_PRIORITY_UNSET; |
| v4l2_prio_open(&vpfe_dev->prio, &fh->prio); |
| mutex_unlock(&vpfe_dev->lock); |
| return 0; |
| } |
| |
| static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev) |
| { |
| unsigned long addr; |
| |
| vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, |
| struct videobuf_buffer, queue); |
| list_del(&vpfe_dev->next_frm->queue); |
| vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE; |
| addr = videobuf_to_dma_contig(vpfe_dev->next_frm); |
| ccdc_dev->hw_ops.setfbaddr(addr); |
| } |
| |
| static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev) |
| { |
| struct timeval timevalue; |
| |
| do_gettimeofday(&timevalue); |
| vpfe_dev->cur_frm->ts = timevalue; |
| vpfe_dev->cur_frm->state = VIDEOBUF_DONE; |
| vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage; |
| wake_up_interruptible(&vpfe_dev->cur_frm->done); |
| vpfe_dev->cur_frm = vpfe_dev->next_frm; |
| } |
| |
| /* ISR for VINT0*/ |
| static irqreturn_t vpfe_isr(int irq, void *dev_id) |
| { |
| struct vpfe_device *vpfe_dev = dev_id; |
| enum v4l2_field field; |
| unsigned long addr; |
| int fid; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n"); |
| field = vpfe_dev->fmt.fmt.pix.field; |
| |
| /* if streaming not started, don't do anything */ |
| if (!vpfe_dev->started) |
| return IRQ_HANDLED; |
| |
| /* only for 6446 this will be applicable */ |
| if (NULL != ccdc_dev->hw_ops.reset) |
| ccdc_dev->hw_ops.reset(); |
| |
| if (field == V4L2_FIELD_NONE) { |
| /* handle progressive frame capture */ |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, |
| "frame format is progressive...\n"); |
| if (vpfe_dev->cur_frm != vpfe_dev->next_frm) |
| vpfe_process_buffer_complete(vpfe_dev); |
| return IRQ_HANDLED; |
| } |
| |
| /* interlaced or TB capture check which field we are in hardware */ |
| fid = ccdc_dev->hw_ops.getfid(); |
| |
| /* switch the software maintained field id */ |
| vpfe_dev->field_id ^= 1; |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n", |
| fid, vpfe_dev->field_id); |
| if (fid == vpfe_dev->field_id) { |
| /* we are in-sync here,continue */ |
| if (fid == 0) { |
| /* |
| * One frame is just being captured. If the next frame |
| * is available, release the current frame and move on |
| */ |
| if (vpfe_dev->cur_frm != vpfe_dev->next_frm) |
| vpfe_process_buffer_complete(vpfe_dev); |
| /* |
| * based on whether the two fields are stored |
| * interleavely or separately in memory, reconfigure |
| * the CCDC memory address |
| */ |
| if (field == V4L2_FIELD_SEQ_TB) { |
| addr = |
| videobuf_to_dma_contig(vpfe_dev->cur_frm); |
| addr += vpfe_dev->field_off; |
| ccdc_dev->hw_ops.setfbaddr(addr); |
| } |
| return IRQ_HANDLED; |
| } |
| /* |
| * if one field is just being captured configure |
| * the next frame get the next frame from the empty |
| * queue if no frame is available hold on to the |
| * current buffer |
| */ |
| spin_lock(&vpfe_dev->dma_queue_lock); |
| if (!list_empty(&vpfe_dev->dma_queue) && |
| vpfe_dev->cur_frm == vpfe_dev->next_frm) |
| vpfe_schedule_next_buffer(vpfe_dev); |
| spin_unlock(&vpfe_dev->dma_queue_lock); |
| } else if (fid == 0) { |
| /* |
| * out of sync. Recover from any hardware out-of-sync. |
| * May loose one frame |
| */ |
| vpfe_dev->field_id = fid; |
| } |
| return IRQ_HANDLED; |
| } |
| |
| /* vdint1_isr - isr handler for VINT1 interrupt */ |
| static irqreturn_t vdint1_isr(int irq, void *dev_id) |
| { |
| struct vpfe_device *vpfe_dev = dev_id; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n"); |
| |
| /* if streaming not started, don't do anything */ |
| if (!vpfe_dev->started) |
| return IRQ_HANDLED; |
| |
| spin_lock(&vpfe_dev->dma_queue_lock); |
| if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) && |
| !list_empty(&vpfe_dev->dma_queue) && |
| vpfe_dev->cur_frm == vpfe_dev->next_frm) |
| vpfe_schedule_next_buffer(vpfe_dev); |
| spin_unlock(&vpfe_dev->dma_queue_lock); |
| return IRQ_HANDLED; |
| } |
| |
| static void vpfe_detach_irq(struct vpfe_device *vpfe_dev) |
| { |
| enum ccdc_frmfmt frame_format; |
| |
| frame_format = ccdc_dev->hw_ops.get_frame_format(); |
| if (frame_format == CCDC_FRMFMT_PROGRESSIVE) |
| free_irq(vpfe_dev->ccdc_irq1, vpfe_dev); |
| } |
| |
| static int vpfe_attach_irq(struct vpfe_device *vpfe_dev) |
| { |
| enum ccdc_frmfmt frame_format; |
| |
| frame_format = ccdc_dev->hw_ops.get_frame_format(); |
| if (frame_format == CCDC_FRMFMT_PROGRESSIVE) { |
| return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr, |
| IRQF_DISABLED, "vpfe_capture1", |
| vpfe_dev); |
| } |
| return 0; |
| } |
| |
| /* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */ |
| static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev) |
| { |
| vpfe_dev->started = 0; |
| ccdc_dev->hw_ops.enable(0); |
| if (ccdc_dev->hw_ops.enable_out_to_sdram) |
| ccdc_dev->hw_ops.enable_out_to_sdram(0); |
| } |
| |
| /* |
| * vpfe_release : This function deletes buffer queue, frees the |
| * buffers and the vpfe file handle |
| */ |
| static int vpfe_release(struct file *file) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_fh *fh = file->private_data; |
| struct vpfe_subdev_info *sdinfo; |
| int ret; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n"); |
| |
| /* Get the device lock */ |
| mutex_lock(&vpfe_dev->lock); |
| /* if this instance is doing IO */ |
| if (fh->io_allowed) { |
| if (vpfe_dev->started) { |
| sdinfo = vpfe_dev->current_subdev; |
| ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, |
| sdinfo->grp_id, |
| video, s_stream, 0); |
| if (ret && (ret != -ENOIOCTLCMD)) |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "stream off failed in subdev\n"); |
| vpfe_stop_ccdc_capture(vpfe_dev); |
| vpfe_detach_irq(vpfe_dev); |
| videobuf_streamoff(&vpfe_dev->buffer_queue); |
| } |
| vpfe_dev->io_usrs = 0; |
| vpfe_dev->numbuffers = config_params.numbuffers; |
| } |
| |
| /* Decrement device usrs counter */ |
| vpfe_dev->usrs--; |
| /* Close the priority */ |
| v4l2_prio_close(&vpfe_dev->prio, &fh->prio); |
| /* If this is the last file handle */ |
| if (!vpfe_dev->usrs) { |
| vpfe_dev->initialized = 0; |
| if (ccdc_dev->hw_ops.close) |
| ccdc_dev->hw_ops.close(vpfe_dev->pdev); |
| module_put(ccdc_dev->owner); |
| } |
| mutex_unlock(&vpfe_dev->lock); |
| file->private_data = NULL; |
| /* Free memory allocated to file handle object */ |
| kfree(fh); |
| return 0; |
| } |
| |
| /* |
| * vpfe_mmap : It is used to map kernel space buffers |
| * into user spaces |
| */ |
| static int vpfe_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| /* Get the device object and file handle object */ |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n"); |
| |
| return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma); |
| } |
| |
| /* |
| * vpfe_poll: It is used for select/poll system call |
| */ |
| static unsigned int vpfe_poll(struct file *file, poll_table *wait) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n"); |
| |
| if (vpfe_dev->started) |
| return videobuf_poll_stream(file, |
| &vpfe_dev->buffer_queue, wait); |
| return 0; |
| } |
| |
| /* vpfe capture driver file operations */ |
| static const struct v4l2_file_operations vpfe_fops = { |
| .owner = THIS_MODULE, |
| .open = vpfe_open, |
| .release = vpfe_release, |
| .unlocked_ioctl = video_ioctl2, |
| .mmap = vpfe_mmap, |
| .poll = vpfe_poll |
| }; |
| |
| /* |
| * vpfe_check_format() |
| * This function adjust the input pixel format as per hardware |
| * capabilities and update the same in pixfmt. |
| * Following algorithm used :- |
| * |
| * If given pixformat is not in the vpfe list of pix formats or not |
| * supported by the hardware, current value of pixformat in the device |
| * is used |
| * If given field is not supported, then current field is used. If field |
| * is different from current, then it is matched with that from sub device. |
| * Minimum height is 2 lines for interlaced or tb field and 1 line for |
| * progressive. Maximum height is clamped to active active lines of scan |
| * Minimum width is 32 bytes in memory and width is clamped to active |
| * pixels of scan. |
| * bytesperline is a multiple of 32. |
| */ |
| static const struct vpfe_pixel_format * |
| vpfe_check_format(struct vpfe_device *vpfe_dev, |
| struct v4l2_pix_format *pixfmt) |
| { |
| u32 min_height = 1, min_width = 32, max_width, max_height; |
| const struct vpfe_pixel_format *vpfe_pix_fmt; |
| u32 pix; |
| int temp, found; |
| |
| vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); |
| if (NULL == vpfe_pix_fmt) { |
| /* |
| * use current pixel format in the vpfe device. We |
| * will find this pix format in the table |
| */ |
| pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; |
| vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); |
| } |
| |
| /* check if hw supports it */ |
| temp = 0; |
| found = 0; |
| while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) { |
| if (vpfe_pix_fmt->fmtdesc.pixelformat == pix) { |
| found = 1; |
| break; |
| } |
| temp++; |
| } |
| |
| if (!found) { |
| /* use current pixel format */ |
| pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; |
| /* |
| * Since this is currently used in the vpfe device, we |
| * will find this pix format in the table |
| */ |
| vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); |
| } |
| |
| /* check what field format is supported */ |
| if (pixfmt->field == V4L2_FIELD_ANY) { |
| /* if field is any, use current value as default */ |
| pixfmt->field = vpfe_dev->fmt.fmt.pix.field; |
| } |
| |
| /* |
| * if field is not same as current field in the vpfe device |
| * try matching the field with the sub device field |
| */ |
| if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) { |
| /* |
| * If field value is not in the supported fields, use current |
| * field used in the device as default |
| */ |
| switch (pixfmt->field) { |
| case V4L2_FIELD_INTERLACED: |
| case V4L2_FIELD_SEQ_TB: |
| /* if sub device is supporting progressive, use that */ |
| if (!vpfe_dev->std_info.frame_format) |
| pixfmt->field = V4L2_FIELD_NONE; |
| break; |
| case V4L2_FIELD_NONE: |
| if (vpfe_dev->std_info.frame_format) |
| pixfmt->field = V4L2_FIELD_INTERLACED; |
| break; |
| |
| default: |
| /* use current field as default */ |
| pixfmt->field = vpfe_dev->fmt.fmt.pix.field; |
| break; |
| } |
| } |
| |
| /* Now adjust image resolutions supported */ |
| if (pixfmt->field == V4L2_FIELD_INTERLACED || |
| pixfmt->field == V4L2_FIELD_SEQ_TB) |
| min_height = 2; |
| |
| max_width = vpfe_dev->std_info.active_pixels; |
| max_height = vpfe_dev->std_info.active_lines; |
| min_width /= vpfe_pix_fmt->bpp; |
| |
| v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n", |
| pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp); |
| |
| pixfmt->width = clamp((pixfmt->width), min_width, max_width); |
| pixfmt->height = clamp((pixfmt->height), min_height, max_height); |
| |
| /* If interlaced, adjust height to be a multiple of 2 */ |
| if (pixfmt->field == V4L2_FIELD_INTERLACED) |
| pixfmt->height &= (~1); |
| /* |
| * recalculate bytesperline and sizeimage since width |
| * and height might have changed |
| */ |
| pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31) |
| & ~31); |
| if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) |
| pixfmt->sizeimage = |
| pixfmt->bytesperline * pixfmt->height + |
| ((pixfmt->bytesperline * pixfmt->height) >> 1); |
| else |
| pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; |
| |
| v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height =" |
| " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n", |
| pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp, |
| pixfmt->bytesperline, pixfmt->sizeimage); |
| return vpfe_pix_fmt; |
| } |
| |
| static int vpfe_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n"); |
| |
| cap->version = VPFE_CAPTURE_VERSION_CODE; |
| cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; |
| strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); |
| strlcpy(cap->bus_info, "VPFE", sizeof(cap->bus_info)); |
| strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card)); |
| return 0; |
| } |
| |
| static int vpfe_g_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *fmt) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| int ret = 0; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n"); |
| /* Fill in the information about format */ |
| *fmt = vpfe_dev->fmt; |
| return ret; |
| } |
| |
| static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *fmt) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| const struct vpfe_pixel_format *pix_fmt; |
| int temp_index; |
| u32 pix; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n"); |
| |
| if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0) |
| return -EINVAL; |
| |
| /* Fill in the information about format */ |
| pix_fmt = vpfe_lookup_pix_format(pix); |
| if (NULL != pix_fmt) { |
| temp_index = fmt->index; |
| *fmt = pix_fmt->fmtdesc; |
| fmt->index = temp_index; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int vpfe_s_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *fmt) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| const struct vpfe_pixel_format *pix_fmts; |
| int ret = 0; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n"); |
| |
| /* If streaming is started, return error */ |
| if (vpfe_dev->started) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n"); |
| return -EBUSY; |
| } |
| |
| /* Check for valid frame format */ |
| pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix); |
| |
| if (NULL == pix_fmts) |
| return -EINVAL; |
| |
| /* store the pixel format in the device object */ |
| ret = mutex_lock_interruptible(&vpfe_dev->lock); |
| if (ret) |
| return ret; |
| |
| /* First detach any IRQ if currently attached */ |
| vpfe_detach_irq(vpfe_dev); |
| vpfe_dev->fmt = *fmt; |
| /* set image capture parameters in the ccdc */ |
| ret = vpfe_config_ccdc_image_format(vpfe_dev); |
| mutex_unlock(&vpfe_dev->lock); |
| return ret; |
| } |
| |
| static int vpfe_try_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| const struct vpfe_pixel_format *pix_fmts; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n"); |
| |
| pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix); |
| if (NULL == pix_fmts) |
| return -EINVAL; |
| return 0; |
| } |
| |
| /* |
| * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a |
| * given app input index |
| */ |
| static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev, |
| int *subdev_index, |
| int *subdev_input_index, |
| int app_input_index) |
| { |
| struct vpfe_config *cfg = vpfe_dev->cfg; |
| struct vpfe_subdev_info *sdinfo; |
| int i, j = 0; |
| |
| for (i = 0; i < cfg->num_subdevs; i++) { |
| sdinfo = &cfg->sub_devs[i]; |
| if (app_input_index < (j + sdinfo->num_inputs)) { |
| *subdev_index = i; |
| *subdev_input_index = app_input_index - j; |
| return 0; |
| } |
| j += sdinfo->num_inputs; |
| } |
| return -EINVAL; |
| } |
| |
| /* |
| * vpfe_get_app_input - Get app input index for a given subdev input index |
| * driver stores the input index of the current sub device and translate it |
| * when application request the current input |
| */ |
| static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev, |
| int *app_input_index) |
| { |
| struct vpfe_config *cfg = vpfe_dev->cfg; |
| struct vpfe_subdev_info *sdinfo; |
| int i, j = 0; |
| |
| for (i = 0; i < cfg->num_subdevs; i++) { |
| sdinfo = &cfg->sub_devs[i]; |
| if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) { |
| if (vpfe_dev->current_input >= sdinfo->num_inputs) |
| return -1; |
| *app_input_index = j + vpfe_dev->current_input; |
| return 0; |
| } |
| j += sdinfo->num_inputs; |
| } |
| return -EINVAL; |
| } |
| |
| static int vpfe_enum_input(struct file *file, void *priv, |
| struct v4l2_input *inp) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_subdev_info *sdinfo; |
| int subdev, index ; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n"); |
| |
| if (vpfe_get_subdev_input_index(vpfe_dev, |
| &subdev, |
| &index, |
| inp->index) < 0) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "input information not found" |
| " for the subdev\n"); |
| return -EINVAL; |
| } |
| sdinfo = &vpfe_dev->cfg->sub_devs[subdev]; |
| memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input)); |
| return 0; |
| } |
| |
| static int vpfe_g_input(struct file *file, void *priv, unsigned int *index) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n"); |
| |
| return vpfe_get_app_input_index(vpfe_dev, index); |
| } |
| |
| |
| static int vpfe_s_input(struct file *file, void *priv, unsigned int index) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_subdev_info *sdinfo; |
| int subdev_index, inp_index; |
| struct vpfe_route *route; |
| u32 input = 0, output = 0; |
| int ret = -EINVAL; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n"); |
| |
| ret = mutex_lock_interruptible(&vpfe_dev->lock); |
| if (ret) |
| return ret; |
| |
| /* |
| * If streaming is started return device busy |
| * error |
| */ |
| if (vpfe_dev->started) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n"); |
| ret = -EBUSY; |
| goto unlock_out; |
| } |
| |
| if (vpfe_get_subdev_input_index(vpfe_dev, |
| &subdev_index, |
| &inp_index, |
| index) < 0) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n"); |
| goto unlock_out; |
| } |
| |
| sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index]; |
| route = &sdinfo->routes[inp_index]; |
| if (route && sdinfo->can_route) { |
| input = route->input; |
| output = route->output; |
| } |
| |
| ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, |
| video, s_routing, input, output, 0); |
| |
| if (ret) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "vpfe_doioctl:error in setting input in decoder\n"); |
| ret = -EINVAL; |
| goto unlock_out; |
| } |
| vpfe_dev->current_subdev = sdinfo; |
| vpfe_dev->current_input = index; |
| vpfe_dev->std_index = 0; |
| |
| /* set the bus/interface parameter for the sub device in ccdc */ |
| ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params); |
| if (ret) |
| goto unlock_out; |
| |
| /* set the default image parameters in the device */ |
| ret = vpfe_config_image_format(vpfe_dev, |
| &vpfe_standards[vpfe_dev->std_index].std_id); |
| unlock_out: |
| mutex_unlock(&vpfe_dev->lock); |
| return ret; |
| } |
| |
| static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_subdev_info *sdinfo; |
| int ret = 0; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n"); |
| |
| ret = mutex_lock_interruptible(&vpfe_dev->lock); |
| sdinfo = vpfe_dev->current_subdev; |
| if (ret) |
| return ret; |
| /* Call querystd function of decoder device */ |
| ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, |
| video, querystd, std_id); |
| mutex_unlock(&vpfe_dev->lock); |
| return ret; |
| } |
| |
| static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id *std_id) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_subdev_info *sdinfo; |
| int ret = 0; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n"); |
| |
| /* Call decoder driver function to set the standard */ |
| ret = mutex_lock_interruptible(&vpfe_dev->lock); |
| if (ret) |
| return ret; |
| |
| sdinfo = vpfe_dev->current_subdev; |
| /* If streaming is started, return device busy error */ |
| if (vpfe_dev->started) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n"); |
| ret = -EBUSY; |
| goto unlock_out; |
| } |
| |
| ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, |
| core, s_std, *std_id); |
| if (ret < 0) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n"); |
| goto unlock_out; |
| } |
| ret = vpfe_config_image_format(vpfe_dev, std_id); |
| |
| unlock_out: |
| mutex_unlock(&vpfe_dev->lock); |
| return ret; |
| } |
| |
| static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n"); |
| |
| *std_id = vpfe_standards[vpfe_dev->std_index].std_id; |
| return 0; |
| } |
| /* |
| * Videobuf operations |
| */ |
| static int vpfe_videobuf_setup(struct videobuf_queue *vq, |
| unsigned int *count, |
| unsigned int *size) |
| { |
| struct vpfe_fh *fh = vq->priv_data; |
| struct vpfe_device *vpfe_dev = fh->vpfe_dev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n"); |
| *size = config_params.device_bufsize; |
| |
| if (*count < config_params.min_numbuffers) |
| *count = config_params.min_numbuffers; |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, |
| "count=%d, size=%d\n", *count, *size); |
| return 0; |
| } |
| |
| static int vpfe_videobuf_prepare(struct videobuf_queue *vq, |
| struct videobuf_buffer *vb, |
| enum v4l2_field field) |
| { |
| struct vpfe_fh *fh = vq->priv_data; |
| struct vpfe_device *vpfe_dev = fh->vpfe_dev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n"); |
| |
| /* If buffer is not initialized, initialize it */ |
| if (VIDEOBUF_NEEDS_INIT == vb->state) { |
| vb->width = vpfe_dev->fmt.fmt.pix.width; |
| vb->height = vpfe_dev->fmt.fmt.pix.height; |
| vb->size = vpfe_dev->fmt.fmt.pix.sizeimage; |
| vb->field = field; |
| } |
| vb->state = VIDEOBUF_PREPARED; |
| return 0; |
| } |
| |
| static void vpfe_videobuf_queue(struct videobuf_queue *vq, |
| struct videobuf_buffer *vb) |
| { |
| /* Get the file handle object and device object */ |
| struct vpfe_fh *fh = vq->priv_data; |
| struct vpfe_device *vpfe_dev = fh->vpfe_dev; |
| unsigned long flags; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n"); |
| |
| /* add the buffer to the DMA queue */ |
| spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); |
| list_add_tail(&vb->queue, &vpfe_dev->dma_queue); |
| spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); |
| |
| /* Change state of the buffer */ |
| vb->state = VIDEOBUF_QUEUED; |
| } |
| |
| static void vpfe_videobuf_release(struct videobuf_queue *vq, |
| struct videobuf_buffer *vb) |
| { |
| struct vpfe_fh *fh = vq->priv_data; |
| struct vpfe_device *vpfe_dev = fh->vpfe_dev; |
| unsigned long flags; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n"); |
| |
| /* |
| * We need to flush the buffer from the dma queue since |
| * they are de-allocated |
| */ |
| spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); |
| INIT_LIST_HEAD(&vpfe_dev->dma_queue); |
| spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); |
| videobuf_dma_contig_free(vq, vb); |
| vb->state = VIDEOBUF_NEEDS_INIT; |
| } |
| |
| static struct videobuf_queue_ops vpfe_videobuf_qops = { |
| .buf_setup = vpfe_videobuf_setup, |
| .buf_prepare = vpfe_videobuf_prepare, |
| .buf_queue = vpfe_videobuf_queue, |
| .buf_release = vpfe_videobuf_release, |
| }; |
| |
| /* |
| * vpfe_reqbufs. currently support REQBUF only once opening |
| * the device. |
| */ |
| static int vpfe_reqbufs(struct file *file, void *priv, |
| struct v4l2_requestbuffers *req_buf) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_fh *fh = file->private_data; |
| int ret = 0; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n"); |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n"); |
| return -EINVAL; |
| } |
| |
| if (V4L2_MEMORY_USERPTR == req_buf->memory) { |
| /* we don't support user ptr IO */ |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs:" |
| " USERPTR IO not supported\n"); |
| return -EINVAL; |
| } |
| |
| ret = mutex_lock_interruptible(&vpfe_dev->lock); |
| if (ret) |
| return ret; |
| |
| if (vpfe_dev->io_usrs != 0) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n"); |
| ret = -EBUSY; |
| goto unlock_out; |
| } |
| |
| vpfe_dev->memory = req_buf->memory; |
| videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue, |
| &vpfe_videobuf_qops, |
| vpfe_dev->pdev, |
| &vpfe_dev->irqlock, |
| req_buf->type, |
| vpfe_dev->fmt.fmt.pix.field, |
| sizeof(struct videobuf_buffer), |
| fh); |
| |
| fh->io_allowed = 1; |
| vpfe_dev->io_usrs = 1; |
| INIT_LIST_HEAD(&vpfe_dev->dma_queue); |
| ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf); |
| unlock_out: |
| mutex_unlock(&vpfe_dev->lock); |
| return ret; |
| } |
| |
| static int vpfe_querybuf(struct file *file, void *priv, |
| struct v4l2_buffer *buf) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n"); |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); |
| return -EINVAL; |
| } |
| |
| if (vpfe_dev->memory != V4L2_MEMORY_MMAP) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n"); |
| return -EINVAL; |
| } |
| /* Call videobuf_querybuf to get information */ |
| return videobuf_querybuf(&vpfe_dev->buffer_queue, buf); |
| } |
| |
| static int vpfe_qbuf(struct file *file, void *priv, |
| struct v4l2_buffer *p) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_fh *fh = file->private_data; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n"); |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * If this file handle is not allowed to do IO, |
| * return error |
| */ |
| if (!fh->io_allowed) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); |
| return -EACCES; |
| } |
| return videobuf_qbuf(&vpfe_dev->buffer_queue, p); |
| } |
| |
| static int vpfe_dqbuf(struct file *file, void *priv, |
| struct v4l2_buffer *buf) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n"); |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); |
| return -EINVAL; |
| } |
| return videobuf_dqbuf(&vpfe_dev->buffer_queue, |
| buf, file->f_flags & O_NONBLOCK); |
| } |
| |
| static int vpfe_queryctrl(struct file *file, void *priv, |
| struct v4l2_queryctrl *qctrl) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_subdev_info *sdinfo; |
| |
| sdinfo = vpfe_dev->current_subdev; |
| |
| return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, |
| core, queryctrl, qctrl); |
| |
| } |
| |
| static int vpfe_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_subdev_info *sdinfo; |
| |
| sdinfo = vpfe_dev->current_subdev; |
| |
| return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, |
| core, g_ctrl, ctrl); |
| } |
| |
| static int vpfe_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_subdev_info *sdinfo; |
| |
| sdinfo = vpfe_dev->current_subdev; |
| |
| return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, |
| core, s_ctrl, ctrl); |
| } |
| |
| /* |
| * vpfe_calculate_offsets : This function calculates buffers offset |
| * for top and bottom field |
| */ |
| static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev) |
| { |
| struct v4l2_rect image_win; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n"); |
| |
| ccdc_dev->hw_ops.get_image_window(&image_win); |
| vpfe_dev->field_off = image_win.height * image_win.width; |
| } |
| |
| /* vpfe_start_ccdc_capture: start streaming in ccdc/isif */ |
| static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev) |
| { |
| ccdc_dev->hw_ops.enable(1); |
| if (ccdc_dev->hw_ops.enable_out_to_sdram) |
| ccdc_dev->hw_ops.enable_out_to_sdram(1); |
| vpfe_dev->started = 1; |
| } |
| |
| /* |
| * vpfe_streamon. Assume the DMA queue is not empty. |
| * application is expected to call QBUF before calling |
| * this ioctl. If not, driver returns error |
| */ |
| static int vpfe_streamon(struct file *file, void *priv, |
| enum v4l2_buf_type buf_type) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_fh *fh = file->private_data; |
| struct vpfe_subdev_info *sdinfo; |
| unsigned long addr; |
| int ret = 0; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n"); |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); |
| return -EINVAL; |
| } |
| |
| /* If file handle is not allowed IO, return error */ |
| if (!fh->io_allowed) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); |
| return -EACCES; |
| } |
| |
| sdinfo = vpfe_dev->current_subdev; |
| ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, |
| video, s_stream, 1); |
| |
| if (ret && (ret != -ENOIOCTLCMD)) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n"); |
| return -EINVAL; |
| } |
| |
| /* If buffer queue is empty, return error */ |
| if (list_empty(&vpfe_dev->buffer_queue.stream)) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n"); |
| return -EIO; |
| } |
| |
| /* Call videobuf_streamon to start streaming * in videobuf */ |
| ret = videobuf_streamon(&vpfe_dev->buffer_queue); |
| if (ret) |
| return ret; |
| |
| |
| ret = mutex_lock_interruptible(&vpfe_dev->lock); |
| if (ret) |
| goto streamoff; |
| /* Get the next frame from the buffer queue */ |
| vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, |
| struct videobuf_buffer, queue); |
| vpfe_dev->cur_frm = vpfe_dev->next_frm; |
| /* Remove buffer from the buffer queue */ |
| list_del(&vpfe_dev->cur_frm->queue); |
| /* Mark state of the current frame to active */ |
| vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE; |
| /* Initialize field_id and started member */ |
| vpfe_dev->field_id = 0; |
| addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); |
| |
| /* Calculate field offset */ |
| vpfe_calculate_offsets(vpfe_dev); |
| |
| if (vpfe_attach_irq(vpfe_dev) < 0) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "Error in attaching interrupt handle\n"); |
| ret = -EFAULT; |
| goto unlock_out; |
| } |
| if (ccdc_dev->hw_ops.configure() < 0) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "Error in configuring ccdc\n"); |
| ret = -EINVAL; |
| goto unlock_out; |
| } |
| ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr)); |
| vpfe_start_ccdc_capture(vpfe_dev); |
| mutex_unlock(&vpfe_dev->lock); |
| return ret; |
| unlock_out: |
| mutex_unlock(&vpfe_dev->lock); |
| streamoff: |
| ret = videobuf_streamoff(&vpfe_dev->buffer_queue); |
| return ret; |
| } |
| |
| static int vpfe_streamoff(struct file *file, void *priv, |
| enum v4l2_buf_type buf_type) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| struct vpfe_fh *fh = file->private_data; |
| struct vpfe_subdev_info *sdinfo; |
| int ret = 0; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n"); |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); |
| return -EINVAL; |
| } |
| |
| /* If io is allowed for this file handle, return error */ |
| if (!fh->io_allowed) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); |
| return -EACCES; |
| } |
| |
| /* If streaming is not started, return error */ |
| if (!vpfe_dev->started) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "device started\n"); |
| return -EINVAL; |
| } |
| |
| ret = mutex_lock_interruptible(&vpfe_dev->lock); |
| if (ret) |
| return ret; |
| |
| vpfe_stop_ccdc_capture(vpfe_dev); |
| vpfe_detach_irq(vpfe_dev); |
| |
| sdinfo = vpfe_dev->current_subdev; |
| ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, |
| video, s_stream, 0); |
| |
| if (ret && (ret != -ENOIOCTLCMD)) |
| v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n"); |
| ret = videobuf_streamoff(&vpfe_dev->buffer_queue); |
| mutex_unlock(&vpfe_dev->lock); |
| return ret; |
| } |
| |
| static int vpfe_cropcap(struct file *file, void *priv, |
| struct v4l2_cropcap *crop) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_cropcap\n"); |
| |
| if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards)) |
| return -EINVAL; |
| |
| memset(crop, 0, sizeof(struct v4l2_cropcap)); |
| crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| crop->bounds.width = crop->defrect.width = |
| vpfe_standards[vpfe_dev->std_index].width; |
| crop->bounds.height = crop->defrect.height = |
| vpfe_standards[vpfe_dev->std_index].height; |
| crop->pixelaspect = vpfe_standards[vpfe_dev->std_index].pixelaspect; |
| return 0; |
| } |
| |
| static int vpfe_g_crop(struct file *file, void *priv, |
| struct v4l2_crop *crop) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_crop\n"); |
| |
| crop->c = vpfe_dev->crop; |
| return 0; |
| } |
| |
| static int vpfe_s_crop(struct file *file, void *priv, |
| struct v4l2_crop *crop) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| int ret = 0; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_crop\n"); |
| |
| if (vpfe_dev->started) { |
| /* make sure streaming is not started */ |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "Cannot change crop when streaming is ON\n"); |
| return -EBUSY; |
| } |
| |
| ret = mutex_lock_interruptible(&vpfe_dev->lock); |
| if (ret) |
| return ret; |
| |
| if (crop->c.top < 0 || crop->c.left < 0) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "doesn't support negative values for top & left\n"); |
| ret = -EINVAL; |
| goto unlock_out; |
| } |
| |
| /* adjust the width to 16 pixel boundry */ |
| crop->c.width = ((crop->c.width + 15) & ~0xf); |
| |
| /* make sure parameters are valid */ |
| if ((crop->c.left + crop->c.width > |
| vpfe_dev->std_info.active_pixels) || |
| (crop->c.top + crop->c.height > |
| vpfe_dev->std_info.active_lines)) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_CROP params\n"); |
| ret = -EINVAL; |
| goto unlock_out; |
| } |
| ccdc_dev->hw_ops.set_image_window(&crop->c); |
| vpfe_dev->fmt.fmt.pix.width = crop->c.width; |
| vpfe_dev->fmt.fmt.pix.height = crop->c.height; |
| vpfe_dev->fmt.fmt.pix.bytesperline = |
| ccdc_dev->hw_ops.get_line_length(); |
| vpfe_dev->fmt.fmt.pix.sizeimage = |
| vpfe_dev->fmt.fmt.pix.bytesperline * |
| vpfe_dev->fmt.fmt.pix.height; |
| vpfe_dev->crop = crop->c; |
| unlock_out: |
| mutex_unlock(&vpfe_dev->lock); |
| return ret; |
| } |
| |
| |
| static long vpfe_param_handler(struct file *file, void *priv, |
| int cmd, void *param) |
| { |
| struct vpfe_device *vpfe_dev = video_drvdata(file); |
| int ret = 0; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n"); |
| |
| if (vpfe_dev->started) { |
| /* only allowed if streaming is not started */ |
| v4l2_err(&vpfe_dev->v4l2_dev, "device already started\n"); |
| return -EBUSY; |
| } |
| |
| ret = mutex_lock_interruptible(&vpfe_dev->lock); |
| if (ret) |
| return ret; |
| |
| switch (cmd) { |
| case VPFE_CMD_S_CCDC_RAW_PARAMS: |
| v4l2_warn(&vpfe_dev->v4l2_dev, |
| "VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n"); |
| ret = ccdc_dev->hw_ops.set_params(param); |
| if (ret) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "Error in setting parameters in CCDC\n"); |
| goto unlock_out; |
| } |
| if (vpfe_get_ccdc_image_format(vpfe_dev, &vpfe_dev->fmt) < 0) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "Invalid image format at CCDC\n"); |
| goto unlock_out; |
| } |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| unlock_out: |
| mutex_unlock(&vpfe_dev->lock); |
| return ret; |
| } |
| |
| |
| /* vpfe capture ioctl operations */ |
| static const struct v4l2_ioctl_ops vpfe_ioctl_ops = { |
| .vidioc_querycap = vpfe_querycap, |
| .vidioc_g_fmt_vid_cap = vpfe_g_fmt_vid_cap, |
| .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = vpfe_s_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = vpfe_try_fmt_vid_cap, |
| .vidioc_enum_input = vpfe_enum_input, |
| .vidioc_g_input = vpfe_g_input, |
| .vidioc_s_input = vpfe_s_input, |
| .vidioc_querystd = vpfe_querystd, |
| .vidioc_s_std = vpfe_s_std, |
| .vidioc_g_std = vpfe_g_std, |
| .vidioc_queryctrl = vpfe_queryctrl, |
| .vidioc_g_ctrl = vpfe_g_ctrl, |
| .vidioc_s_ctrl = vpfe_s_ctrl, |
| .vidioc_reqbufs = vpfe_reqbufs, |
| .vidioc_querybuf = vpfe_querybuf, |
| .vidioc_qbuf = vpfe_qbuf, |
| .vidioc_dqbuf = vpfe_dqbuf, |
| .vidioc_streamon = vpfe_streamon, |
| .vidioc_streamoff = vpfe_streamoff, |
| .vidioc_cropcap = vpfe_cropcap, |
| .vidioc_g_crop = vpfe_g_crop, |
| .vidioc_s_crop = vpfe_s_crop, |
| .vidioc_default = vpfe_param_handler, |
| }; |
| |
| static struct vpfe_device *vpfe_initialize(void) |
| { |
| struct vpfe_device *vpfe_dev; |
| |
| /* Default number of buffers should be 3 */ |
| if ((numbuffers > 0) && |
| (numbuffers < config_params.min_numbuffers)) |
| numbuffers = config_params.min_numbuffers; |
| |
| /* |
| * Set buffer size to min buffers size if invalid buffer size is |
| * given |
| */ |
| if (bufsize < config_params.min_bufsize) |
| bufsize = config_params.min_bufsize; |
| |
| config_params.numbuffers = numbuffers; |
| |
| if (numbuffers) |
| config_params.device_bufsize = bufsize; |
| |
| /* Allocate memory for device objects */ |
| vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL); |
| |
| return vpfe_dev; |
| } |
| |
| /* |
| * vpfe_probe : This function creates device entries by register |
| * itself to the V4L2 driver and initializes fields of each |
| * device objects |
| */ |
| static __init int vpfe_probe(struct platform_device *pdev) |
| { |
| struct vpfe_subdev_info *sdinfo; |
| struct vpfe_config *vpfe_cfg; |
| struct resource *res1; |
| struct vpfe_device *vpfe_dev; |
| struct i2c_adapter *i2c_adap; |
| struct video_device *vfd; |
| int ret = -ENOMEM, i, j; |
| int num_subdevs = 0; |
| |
| /* Get the pointer to the device object */ |
| vpfe_dev = vpfe_initialize(); |
| |
| if (!vpfe_dev) { |
| v4l2_err(pdev->dev.driver, |
| "Failed to allocate memory for vpfe_dev\n"); |
| return ret; |
| } |
| |
| vpfe_dev->pdev = &pdev->dev; |
| |
| if (NULL == pdev->dev.platform_data) { |
| v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n"); |
| ret = -ENODEV; |
| goto probe_free_dev_mem; |
| } |
| |
| vpfe_cfg = pdev->dev.platform_data; |
| vpfe_dev->cfg = vpfe_cfg; |
| if (NULL == vpfe_cfg->ccdc || |
| NULL == vpfe_cfg->card_name || |
| NULL == vpfe_cfg->sub_devs) { |
| v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n"); |
| ret = -ENOENT; |
| goto probe_free_dev_mem; |
| } |
| |
| mutex_lock(&ccdc_lock); |
| /* Allocate memory for ccdc configuration */ |
| ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL); |
| if (NULL == ccdc_cfg) { |
| v4l2_err(pdev->dev.driver, |
| "Memory allocation failed for ccdc_cfg\n"); |
| goto probe_free_dev_mem; |
| } |
| |
| strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32); |
| /* Get VINT0 irq resource */ |
| res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!res1) { |
| v4l2_err(pdev->dev.driver, |
| "Unable to get interrupt for VINT0\n"); |
| ret = -ENODEV; |
| goto probe_free_ccdc_cfg_mem; |
| } |
| vpfe_dev->ccdc_irq0 = res1->start; |
| |
| /* Get VINT1 irq resource */ |
| res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); |
| if (!res1) { |
| v4l2_err(pdev->dev.driver, |
| "Unable to get interrupt for VINT1\n"); |
| ret = -ENODEV; |
| goto probe_free_ccdc_cfg_mem; |
| } |
| vpfe_dev->ccdc_irq1 = res1->start; |
| |
| ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, IRQF_DISABLED, |
| "vpfe_capture0", vpfe_dev); |
| |
| if (0 != ret) { |
| v4l2_err(pdev->dev.driver, "Unable to request interrupt\n"); |
| goto probe_free_ccdc_cfg_mem; |
| } |
| |
| /* Allocate memory for video device */ |
| vfd = video_device_alloc(); |
| if (NULL == vfd) { |
| ret = -ENOMEM; |
| v4l2_err(pdev->dev.driver, "Unable to alloc video device\n"); |
| goto probe_out_release_irq; |
| } |
| |
| /* Initialize field of video device */ |
| vfd->release = video_device_release; |
| vfd->fops = &vpfe_fops; |
| vfd->ioctl_ops = &vpfe_ioctl_ops; |
| vfd->tvnorms = 0; |
| vfd->current_norm = V4L2_STD_PAL; |
| vfd->v4l2_dev = &vpfe_dev->v4l2_dev; |
| snprintf(vfd->name, sizeof(vfd->name), |
| "%s_V%d.%d.%d", |
| CAPTURE_DRV_NAME, |
| (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff, |
| (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff, |
| (VPFE_CAPTURE_VERSION_CODE) & 0xff); |
| /* Set video_dev to the video device */ |
| vpfe_dev->video_dev = vfd; |
| |
| ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev); |
| if (ret) { |
| v4l2_err(pdev->dev.driver, |
| "Unable to register v4l2 device.\n"); |
| goto probe_out_video_release; |
| } |
| v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n"); |
| spin_lock_init(&vpfe_dev->irqlock); |
| spin_lock_init(&vpfe_dev->dma_queue_lock); |
| mutex_init(&vpfe_dev->lock); |
| |
| /* Initialize field of the device objects */ |
| vpfe_dev->numbuffers = config_params.numbuffers; |
| |
| /* Initialize prio member of device object */ |
| v4l2_prio_init(&vpfe_dev->prio); |
| /* register video device */ |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, |
| "trying to register vpfe device.\n"); |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, |
| "video_dev=%x\n", (int)&vpfe_dev->video_dev); |
| vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| ret = video_register_device(vpfe_dev->video_dev, |
| VFL_TYPE_GRABBER, -1); |
| |
| if (ret) { |
| v4l2_err(pdev->dev.driver, |
| "Unable to register video device.\n"); |
| goto probe_out_v4l2_unregister; |
| } |
| |
| v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n"); |
| /* set the driver data in platform device */ |
| platform_set_drvdata(pdev, vpfe_dev); |
| /* set driver private data */ |
| video_set_drvdata(vpfe_dev->video_dev, vpfe_dev); |
| i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id); |
| num_subdevs = vpfe_cfg->num_subdevs; |
| vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs, |
| GFP_KERNEL); |
| if (NULL == vpfe_dev->sd) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "unable to allocate memory for subdevice pointers\n"); |
| ret = -ENOMEM; |
| goto probe_out_video_unregister; |
| } |
| |
| for (i = 0; i < num_subdevs; i++) { |
| struct v4l2_input *inps; |
| |
| sdinfo = &vpfe_cfg->sub_devs[i]; |
| |
| /* Load up the subdevice */ |
| vpfe_dev->sd[i] = |
| v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev, |
| i2c_adap, |
| sdinfo->name, |
| &sdinfo->board_info, |
| NULL); |
| if (vpfe_dev->sd[i]) { |
| v4l2_info(&vpfe_dev->v4l2_dev, |
| "v4l2 sub device %s registered\n", |
| sdinfo->name); |
| vpfe_dev->sd[i]->grp_id = sdinfo->grp_id; |
| /* update tvnorms from the sub devices */ |
| for (j = 0; j < sdinfo->num_inputs; j++) { |
| inps = &sdinfo->inputs[j]; |
| vfd->tvnorms |= inps->std; |
| } |
| } else { |
| v4l2_info(&vpfe_dev->v4l2_dev, |
| "v4l2 sub device %s register fails\n", |
| sdinfo->name); |
| goto probe_sd_out; |
| } |
| } |
| |
| /* set first sub device as current one */ |
| vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0]; |
| |
| /* We have at least one sub device to work with */ |
| mutex_unlock(&ccdc_lock); |
| return 0; |
| |
| probe_sd_out: |
| kfree(vpfe_dev->sd); |
| probe_out_video_unregister: |
| video_unregister_device(vpfe_dev->video_dev); |
| probe_out_v4l2_unregister: |
| v4l2_device_unregister(&vpfe_dev->v4l2_dev); |
| probe_out_video_release: |
| if (!video_is_registered(vpfe_dev->video_dev)) |
| video_device_release(vpfe_dev->video_dev); |
| probe_out_release_irq: |
| free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); |
| probe_free_ccdc_cfg_mem: |
| mutex_unlock(&ccdc_lock); |
| kfree(ccdc_cfg); |
| probe_free_dev_mem: |
| kfree(vpfe_dev); |
| return ret; |
| } |
| |
| /* |
| * vpfe_remove : It un-register device from V4L2 driver |
| */ |
| static int __devexit vpfe_remove(struct platform_device *pdev) |
| { |
| struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev); |
| |
| v4l2_info(pdev->dev.driver, "vpfe_remove\n"); |
| |
| free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); |
| kfree(vpfe_dev->sd); |
| v4l2_device_unregister(&vpfe_dev->v4l2_dev); |
| video_unregister_device(vpfe_dev->video_dev); |
| kfree(vpfe_dev); |
| kfree(ccdc_cfg); |
| return 0; |
| } |
| |
| static int |
| vpfe_suspend(struct device *dev) |
| { |
| /* add suspend code here later */ |
| return -1; |
| } |
| |
| static int |
| vpfe_resume(struct device *dev) |
| { |
| /* add resume code here later */ |
| return -1; |
| } |
| |
| static const struct dev_pm_ops vpfe_dev_pm_ops = { |
| .suspend = vpfe_suspend, |
| .resume = vpfe_resume, |
| }; |
| |
| static struct platform_driver vpfe_driver = { |
| .driver = { |
| .name = CAPTURE_DRV_NAME, |
| .owner = THIS_MODULE, |
| .pm = &vpfe_dev_pm_ops, |
| }, |
| .probe = vpfe_probe, |
| .remove = __devexit_p(vpfe_remove), |
| }; |
| |
| static __init int vpfe_init(void) |
| { |
| printk(KERN_NOTICE "vpfe_init\n"); |
| /* Register driver to the kernel */ |
| return platform_driver_register(&vpfe_driver); |
| } |
| |
| /* |
| * vpfe_cleanup : This function un-registers device driver |
| */ |
| static void vpfe_cleanup(void) |
| { |
| platform_driver_unregister(&vpfe_driver); |
| } |
| |
| module_init(vpfe_init); |
| module_exit(vpfe_cleanup); |