OMAP3 SDRC: add support for 2 SDRAM chip selects
Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2
SDRAM parts connected to the SDRC.
This patch adds the following:
- add a new argument of type omap_sdrc_params struct*
to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params
- adapted the OMAP boards files to the new prototype of
omap2_init_common_hw
- add the SDRC 2nd CS registers offsets defines
- adapt the sram sleep code to configure the SDRC for the 2nd CS
Note: If the 2nd param to omap2_init_common_hw is NULL, then the
parameters are not programmed into the SDRC CS1 registers
Tested on 3430 SDP and Beagleboard rev C2 and B5, with
suspend/resume and frequency changes (cpufreq).
Signed-off-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 045da92..1c6480d 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -725,7 +725,9 @@
u32 unlock_dll = 0;
u32 c;
unsigned long validrate, sdrcrate, mpurate;
- struct omap_sdrc_params *sp;
+ struct omap_sdrc_params *sdrc_cs0;
+ struct omap_sdrc_params *sdrc_cs1;
+ int ret;
if (!clk || !rate)
return -EINVAL;
@@ -743,8 +745,8 @@
else
sdrcrate >>= ((clk->rate / rate) >> 1);
- sp = omap2_sdrc_get_params(sdrcrate);
- if (!sp)
+ ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
+ if (ret)
return -EINVAL;
if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
@@ -765,12 +767,29 @@
pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
validrate);
- pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
- sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+ pr_debug("clock: SDRC CS0 timing params used:"
+ " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
+ if (sdrc_cs1)
+ pr_debug("clock: SDRC CS1 timing params used: "
+ " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+ sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
- omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
- sp->actim_ctrlb, new_div, unlock_dll, c,
- sp->mr, rate > clk->rate);
+ if (sdrc_cs1)
+ omap3_configure_core_dpll(
+ new_div, unlock_dll, c, rate > clk->rate,
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+ sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+ sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+ else
+ omap3_configure_core_dpll(
+ new_div, unlock_dll, c, rate > clk->rate,
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+ 0, 0, 0, 0);
return 0;
}