intel_mid_dma: Add sg list support to DMA driver
For a very high speed DMA various periphral devices need
scatter-gather list support. The DMA hardware support link list items.
This list can be circular also (adding new flag DMA_PREP_CIRCULAR_LIST)
Right now this flag is in driver header and should be moved to
dmaengine header file eventually
Signed-off-by: Ramesh Babu K V <ramesh.b.k.v@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h
index a12dd25..7a5ac56 100644
--- a/drivers/dma/intel_mid_dma_regs.h
+++ b/drivers/dma/intel_mid_dma_regs.h
@@ -29,11 +29,12 @@
#include <linux/dmapool.h>
#include <linux/pci_ids.h>
-#define INTEL_MID_DMA_DRIVER_VERSION "1.0.6"
+#define INTEL_MID_DMA_DRIVER_VERSION "1.1.0"
#define REG_BIT0 0x00000001
#define REG_BIT8 0x00000100
-
+#define INT_MASK_WE 0x8
+#define CLEAR_DONE 0xFFFFEFFF
#define UNMASK_INTR_REG(chan_num) \
((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
#define MASK_INTR_REG(chan_num) (REG_BIT8 << chan_num)
@@ -41,6 +42,9 @@
#define ENABLE_CHANNEL(chan_num) \
((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
+#define DISABLE_CHANNEL(chan_num) \
+ (REG_BIT8 << chan_num)
+
#define DESCS_PER_CHANNEL 16
/*DMA Registers*/
/*registers associated with channel programming*/
@@ -50,6 +54,7 @@
/*CH X REG = (DMA_CH_SIZE)*CH_NO + REG*/
#define SAR 0x00 /* Source Address Register*/
#define DAR 0x08 /* Destination Address Register*/
+#define LLP 0x10 /* Linked List Pointer Register*/
#define CTL_LOW 0x18 /* Control Register*/
#define CTL_HIGH 0x1C /* Control Register*/
#define CFG_LOW 0x40 /* Configuration Register Low*/
@@ -112,8 +117,8 @@
union intel_mid_dma_ctl_hi {
struct {
u32 block_ts:12; /*block transfer size*/
- /*configured by DMAC*/
- u32 reser:20;
+ u32 done:1; /*Done - updated by DMAC*/
+ u32 reser:19; /*configured by DMAC*/
} ctlx;
u32 ctl_hi;
@@ -169,6 +174,8 @@
* @dma: dma device struture pointer
* @busy: bool representing if ch is busy (active txn) or not
* @in_use: bool representing if ch is in use or not
+ * @raw_tfr: raw trf interrupt recieved
+ * @raw_block: raw block interrupt recieved
*/
struct intel_mid_dma_chan {
struct dma_chan chan;
@@ -185,6 +192,8 @@
struct middma_device *dma;
bool busy;
bool in_use;
+ u32 raw_tfr;
+ u32 raw_block;
};
static inline struct intel_mid_dma_chan *to_intel_mid_dma_chan(
@@ -247,6 +256,11 @@
u32 cfg_lo;
u32 ctl_lo;
u32 ctl_hi;
+ struct pci_pool *lli_pool;
+ struct intel_mid_dma_lli *lli;
+ dma_addr_t lli_phys;
+ unsigned int lli_length;
+ unsigned int current_lli;
dma_addr_t next;
enum dma_data_direction dirn;
enum dma_status status;
@@ -255,6 +269,14 @@
};
+struct intel_mid_dma_lli {
+ dma_addr_t sar;
+ dma_addr_t dar;
+ dma_addr_t llp;
+ u32 ctl_lo;
+ u32 ctl_hi;
+} __attribute__ ((packed));
+
static inline int test_ch_en(void __iomem *dma, u32 ch_no)
{
u32 en_reg = ioread32(dma + DMA_CHAN_EN);