diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/Documentation/devicetree/bindings/video/simple-framebuffer.txt
index 3ea4605..70c26f3 100644
--- a/Documentation/devicetree/bindings/video/simple-framebuffer.txt
+++ b/Documentation/devicetree/bindings/video/simple-framebuffer.txt
@@ -12,6 +12,7 @@
 - stride: The number of bytes in each line of the framebuffer.
 - format: The format of the framebuffer surface. Valid values are:
   - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
+  - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
 
 Example:
 
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0c10b0b..b49f5b5 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2100,13 +2100,6 @@
         bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
         depends on FB_NUC900
 
-config FB_NUC900_DEBUG
-        bool "NUC900 lcd debug messages"
-        depends on FB_NUC900
-        help
-          Turn on debugging messages. Note that you can set/unset at run time
-          through sysfs
-
 config FB_SM501
 	tristate "Silicon Motion SM501 framebuffer support"
 	depends on FB && MFD_SM501
diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index a0482b5..c7af8c4 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -71,11 +71,24 @@
 #define HX8357_SET_POWER_NORMAL		0xd2
 #define HX8357_SET_PANEL_RELATED	0xe9
 
+#define HX8369_SET_DISPLAY_BRIGHTNESS		0x51
+#define HX8369_WRITE_CABC_DISPLAY_VALUE		0x53
+#define HX8369_WRITE_CABC_BRIGHT_CTRL		0x55
+#define HX8369_WRITE_CABC_MIN_BRIGHTNESS	0x5e
+#define HX8369_SET_POWER			0xb1
+#define HX8369_SET_DISPLAY_MODE			0xb2
+#define HX8369_SET_DISPLAY_WAVEFORM_CYC		0xb4
+#define HX8369_SET_VCOM				0xb6
+#define HX8369_SET_EXTENSION_COMMAND		0xb9
+#define HX8369_SET_GIP				0xd5
+#define HX8369_SET_GAMMA_CURVE_RELATED		0xe0
+
 struct hx8357_data {
 	unsigned		im_pins[HX8357_NUM_IM_PINS];
 	unsigned		reset;
 	struct spi_device	*spi;
 	int			state;
+	bool			use_im_pins;
 };
 
 static u8 hx8357_seq_power[] = {
@@ -143,6 +156,61 @@
 	HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
 };
 
+static u8 hx8369_seq_write_CABC_min_brightness[] = {
+	HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
+};
+
+static u8 hx8369_seq_write_CABC_control[] = {
+	HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
+};
+
+static u8 hx8369_seq_set_display_brightness[] = {
+	HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
+};
+
+static u8 hx8369_seq_write_CABC_control_setting[] = {
+	HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
+};
+
+static u8 hx8369_seq_extension_command[] = {
+	HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
+};
+
+static u8 hx8369_seq_display_related[] = {
+	HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
+	0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00,	0x01,
+};
+
+static u8 hx8369_seq_panel_waveform_cycle[] = {
+	HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
+};
+
+static u8 hx8369_seq_set_address_mode[] = {
+	HX8357_SET_ADDRESS_MODE, 0x00,
+};
+
+static u8 hx8369_seq_vcom[] = {
+	HX8369_SET_VCOM, 0x3e, 0x3e,
+};
+
+static u8 hx8369_seq_gip[] = {
+	HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
+	0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
+	0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
+};
+
+static u8 hx8369_seq_power[] = {
+	HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
+	0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
+};
+
+static u8 hx8369_seq_gamma_curve_related[] = {
+	HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
+	0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+	0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
+	0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+};
+
 static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
 				u8 *txbuf, u16 txlen,
 				u8 *rxbuf, u16 rxlen)
@@ -219,6 +287,10 @@
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * The controller needs 120ms when entering in sleep mode before we can
+	 * send the command to go off sleep mode
+	 */
 	msleep(120);
 
 	return 0;
@@ -232,6 +304,10 @@
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * The controller needs 120ms when exiting from sleep mode before we
+	 * can send the command to enter in sleep mode
+	 */
 	msleep(120);
 
 	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
@@ -241,6 +317,21 @@
 	return 0;
 }
 
+static void hx8357_lcd_reset(struct lcd_device *lcdev)
+{
+	struct hx8357_data *lcd = lcd_get_data(lcdev);
+
+	/* Reset the screen */
+	gpio_set_value(lcd->reset, 1);
+	usleep_range(10000, 12000);
+	gpio_set_value(lcd->reset, 0);
+	usleep_range(10000, 12000);
+	gpio_set_value(lcd->reset, 1);
+
+	/* The controller needs 120ms to recover from reset */
+	msleep(120);
+}
+
 static int hx8357_lcd_init(struct lcd_device *lcdev)
 {
 	struct hx8357_data *lcd = lcd_get_data(lcdev);
@@ -250,17 +341,11 @@
 	 * Set the interface selection pins to SPI mode, with three
 	 * wires
 	 */
-	gpio_set_value_cansleep(lcd->im_pins[0], 1);
-	gpio_set_value_cansleep(lcd->im_pins[1], 0);
-	gpio_set_value_cansleep(lcd->im_pins[2], 1);
-
-	/* Reset the screen */
-	gpio_set_value(lcd->reset, 1);
-	usleep_range(10000, 12000);
-	gpio_set_value(lcd->reset, 0);
-	usleep_range(10000, 12000);
-	gpio_set_value(lcd->reset, 1);
-	msleep(120);
+	if (lcd->use_im_pins) {
+		gpio_set_value_cansleep(lcd->im_pins[0], 1);
+		gpio_set_value_cansleep(lcd->im_pins[1], 0);
+		gpio_set_value_cansleep(lcd->im_pins[2], 1);
+	}
 
 	ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
 				ARRAY_SIZE(hx8357_seq_power));
@@ -341,6 +426,9 @@
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * The controller needs 120ms to fully recover from exiting sleep mode
+	 */
 	msleep(120);
 
 	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
@@ -356,6 +444,96 @@
 	return 0;
 }
 
+static int hx8369_lcd_init(struct lcd_device *lcdev)
+{
+	int ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
+				ARRAY_SIZE(hx8369_seq_extension_command));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
+				ARRAY_SIZE(hx8369_seq_display_related));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
+				ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
+				ARRAY_SIZE(hx8369_seq_set_address_mode));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
+				ARRAY_SIZE(hx8369_seq_vcom));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
+				ARRAY_SIZE(hx8369_seq_gip));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
+				ARRAY_SIZE(hx8369_seq_power));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The controller needs 120ms to fully recover from exiting sleep mode
+	 */
+	msleep(120);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
+				ARRAY_SIZE(hx8369_seq_gamma_curve_related));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+	usleep_range(1000, 1200);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
+				ARRAY_SIZE(hx8369_seq_write_CABC_control));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev,
+			hx8369_seq_write_CABC_control_setting,
+			ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev,
+			hx8369_seq_write_CABC_min_brightness,
+			ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
+				ARRAY_SIZE(hx8369_seq_set_display_brightness));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 #define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
 
 static int hx8357_set_power(struct lcd_device *lcdev, int power)
@@ -388,10 +566,24 @@
 	.get_power	= hx8357_get_power,
 };
 
+static const struct of_device_id hx8357_dt_ids[] = {
+	{
+		.compatible = "himax,hx8357",
+		.data = hx8357_lcd_init,
+	},
+	{
+		.compatible = "himax,hx8369",
+		.data = hx8369_lcd_init,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
+
 static int hx8357_probe(struct spi_device *spi)
 {
 	struct lcd_device *lcdev;
 	struct hx8357_data *lcd;
+	const struct of_device_id *match;
 	int i, ret;
 
 	lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
@@ -408,6 +600,10 @@
 
 	lcd->spi = spi;
 
+	match = of_match_device(hx8357_dt_ids, &spi->dev);
+	if (!match || !match->data)
+		return -EINVAL;
+
 	lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
 	if (!gpio_is_valid(lcd->reset)) {
 		dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
@@ -424,25 +620,32 @@
 		return -EINVAL;
 	}
 
-	for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
-		lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
-						"im-gpios", i);
-		if (lcd->im_pins[i] == -EPROBE_DEFER) {
-			dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
-			return -EPROBE_DEFER;
-		}
-		if (!gpio_is_valid(lcd->im_pins[i])) {
-			dev_err(&spi->dev, "Missing dt property: im-gpios\n");
-			return -EINVAL;
-		}
+	if (of_find_property(spi->dev.of_node, "im-gpios", NULL)) {
+		lcd->use_im_pins = 1;
 
-		ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
-					GPIOF_OUT_INIT_LOW, "im_pins");
-		if (ret) {
-			dev_err(&spi->dev, "failed to request gpio %d: %d\n",
-				lcd->im_pins[i], ret);
-			return -EINVAL;
+		for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
+			lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
+							    "im-gpios", i);
+			if (lcd->im_pins[i] == -EPROBE_DEFER) {
+				dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
+				return -EPROBE_DEFER;
+			}
+			if (!gpio_is_valid(lcd->im_pins[i])) {
+				dev_err(&spi->dev, "Missing dt property: im-gpios\n");
+				return -EINVAL;
+			}
+
+			ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
+						    GPIOF_OUT_INIT_LOW,
+						    "im_pins");
+			if (ret) {
+				dev_err(&spi->dev, "failed to request gpio %d: %d\n",
+					lcd->im_pins[i], ret);
+				return -EINVAL;
+			}
 		}
+	} else {
+		lcd->use_im_pins = 0;
 	}
 
 	lcdev = lcd_device_register("mxsfb", &spi->dev, lcd, &hx8357_ops);
@@ -452,7 +655,9 @@
 	}
 	spi_set_drvdata(spi, lcdev);
 
-	ret = hx8357_lcd_init(lcdev);
+	hx8357_lcd_reset(lcdev);
+
+	ret = ((int (*)(struct lcd_device *))match->data)(lcdev);
 	if (ret) {
 		dev_err(&spi->dev, "Couldn't initialize panel\n");
 		goto init_error;
@@ -475,12 +680,6 @@
 	return 0;
 }
 
-static const struct of_device_id hx8357_dt_ids[] = {
-	{ .compatible = "himax,hx8357" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
-
 static struct spi_driver hx8357_driver = {
 	.probe  = hx8357_probe,
 	.remove = hx8357_remove,
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index a0e1e02..c0b41f13 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -246,7 +246,7 @@
 {
 	struct lp855x *lp = bl_get_data(bl);
 
-	if (bl->props.state & BL_CORE_SUSPENDED)
+	if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
 		bl->props.brightness = 0;
 
 	if (lp->mode == PWM_BASED) {
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 401a56e..2456529 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -2029,10 +2029,9 @@
 		return -1;
 	}
 
-	minfo = kmalloc(sizeof(*minfo), GFP_KERNEL);
+	minfo = kzalloc(sizeof(*minfo), GFP_KERNEL);
 	if (!minfo)
 		return -1;
-	memset(minfo, 0, sizeof(*minfo));
 
 	minfo->pcidev = pdev;
 	minfo->dead = 0;
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 3ba3771..5861ba2 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -46,7 +46,6 @@
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/fb.h>
 #include <linux/regulator/consumer.h>
 #include <video/of_display_timing.h>
@@ -877,7 +876,6 @@
 	struct mxsfb_info *host;
 	struct fb_info *fb_info;
 	struct fb_modelist *modelist;
-	struct pinctrl *pinctrl;
 	int ret;
 
 	if (of_id)
@@ -908,12 +906,6 @@
 
 	host->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl)) {
-		ret = PTR_ERR(pinctrl);
-		goto fb_release;
-	}
-
 	host->clk = devm_clk_get(&host->pdev->dev, NULL);
 	if (IS_ERR(host->clk)) {
 		ret = PTR_ERR(host->clk);
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index e242ed8..3dfe009 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -779,16 +779,14 @@
 	struct omap_video_timings video_timing;
 	struct hdmi_video_format video_format;
 	/* HDMI core */
-	struct hdmi_core_infoframe_avi avi_cfg = ip_data->avi_cfg;
+	struct hdmi_core_infoframe_avi *avi_cfg = &ip_data->avi_cfg;
 	struct hdmi_core_video_config v_core_cfg;
 	struct hdmi_core_packet_enable_repeat repeat_cfg;
 	struct hdmi_config *cfg = &ip_data->cfg;
 
 	hdmi_wp_init(&video_timing, &video_format);
 
-	hdmi_core_init(&v_core_cfg,
-		&avi_cfg,
-		&repeat_cfg);
+	hdmi_core_init(&v_core_cfg, avi_cfg, &repeat_cfg);
 
 	hdmi_wp_video_init_format(&video_format, &video_timing, cfg);
 
@@ -822,24 +820,24 @@
 	 * configure packet
 	 * info frame video see doc CEA861-D page 65
 	 */
-	avi_cfg.db1_format = HDMI_INFOFRAME_AVI_DB1Y_RGB;
-	avi_cfg.db1_active_info =
-		HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_OFF;
-	avi_cfg.db1_bar_info_dv = HDMI_INFOFRAME_AVI_DB1B_NO;
-	avi_cfg.db1_scan_info = HDMI_INFOFRAME_AVI_DB1S_0;
-	avi_cfg.db2_colorimetry = HDMI_INFOFRAME_AVI_DB2C_NO;
-	avi_cfg.db2_aspect_ratio = HDMI_INFOFRAME_AVI_DB2M_NO;
-	avi_cfg.db2_active_fmt_ar = HDMI_INFOFRAME_AVI_DB2R_SAME;
-	avi_cfg.db3_itc = HDMI_INFOFRAME_AVI_DB3ITC_NO;
-	avi_cfg.db3_ec = HDMI_INFOFRAME_AVI_DB3EC_XVYUV601;
-	avi_cfg.db3_q_range = HDMI_INFOFRAME_AVI_DB3Q_DEFAULT;
-	avi_cfg.db3_nup_scaling = HDMI_INFOFRAME_AVI_DB3SC_NO;
-	avi_cfg.db4_videocode = cfg->cm.code;
-	avi_cfg.db5_pixel_repeat = HDMI_INFOFRAME_AVI_DB5PR_NO;
-	avi_cfg.db6_7_line_eoftop = 0;
-	avi_cfg.db8_9_line_sofbottom = 0;
-	avi_cfg.db10_11_pixel_eofleft = 0;
-	avi_cfg.db12_13_pixel_sofright = 0;
+	avi_cfg->db1_format = HDMI_INFOFRAME_AVI_DB1Y_RGB;
+	avi_cfg->db1_active_info =
+			HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_OFF;
+	avi_cfg->db1_bar_info_dv = HDMI_INFOFRAME_AVI_DB1B_NO;
+	avi_cfg->db1_scan_info = HDMI_INFOFRAME_AVI_DB1S_0;
+	avi_cfg->db2_colorimetry = HDMI_INFOFRAME_AVI_DB2C_NO;
+	avi_cfg->db2_aspect_ratio = HDMI_INFOFRAME_AVI_DB2M_NO;
+	avi_cfg->db2_active_fmt_ar = HDMI_INFOFRAME_AVI_DB2R_SAME;
+	avi_cfg->db3_itc = HDMI_INFOFRAME_AVI_DB3ITC_NO;
+	avi_cfg->db3_ec = HDMI_INFOFRAME_AVI_DB3EC_XVYUV601;
+	avi_cfg->db3_q_range = HDMI_INFOFRAME_AVI_DB3Q_DEFAULT;
+	avi_cfg->db3_nup_scaling = HDMI_INFOFRAME_AVI_DB3SC_NO;
+	avi_cfg->db4_videocode = cfg->cm.code;
+	avi_cfg->db5_pixel_repeat = HDMI_INFOFRAME_AVI_DB5PR_NO;
+	avi_cfg->db6_7_line_eoftop = 0;
+	avi_cfg->db8_9_line_sofbottom = 0;
+	avi_cfg->db10_11_pixel_eofleft = 0;
+	avi_cfg->db12_13_pixel_sofright = 0;
 
 	hdmi_core_aux_infoframe_avi_config(ip_data);
 
diff --git a/drivers/video/output.c b/drivers/video/output.c
index 6285b97..1446c49 100644
--- a/drivers/video/output.c
+++ b/drivers/video/output.c
@@ -32,8 +32,8 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luming Yu <luming.yu@intel.com>");
 
-static ssize_t video_output_show_state(struct device *dev,
-				       struct device_attribute *attr, char *buf)
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
 {
 	ssize_t ret_size = 0;
 	struct output_device *od = to_output_device(dev);
@@ -42,9 +42,8 @@
 	return ret_size;
 }
 
-static ssize_t video_output_store_state(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf,size_t count)
+static ssize_t state_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf,size_t count)
 {
 	char *endp;
 	struct output_device *od = to_output_device(dev);
@@ -62,6 +61,7 @@
 	}
 	return count;
 }
+static DEVICE_ATTR_RW(state);
 
 static void video_output_release(struct device *dev)
 {
@@ -69,16 +69,16 @@
 	kfree(od);
 }
 
-static struct device_attribute video_output_attributes[] = {
-	__ATTR(state, 0644, video_output_show_state, video_output_store_state),
-	__ATTR_NULL,
+static struct attribute *video_output_attrs[] = {
+	&dev_attr_state.attr,
+	NULL,
 };
-
+ATTRIBUTE_GROUPS(video_output);
 
 static struct class video_output_class = {
 	.name = "video_output",
 	.dev_release = video_output_release,
-	.dev_attrs = video_output_attributes,
+	.dev_groups = video_output_groups,
 };
 
 struct output_device *video_output_register(const char *name,
diff --git a/drivers/video/simplefb.c b/drivers/video/simplefb.c
index e2e9e3e..f015482 100644
--- a/drivers/video/simplefb.c
+++ b/drivers/video/simplefb.c
@@ -84,6 +84,7 @@
 
 static struct simplefb_format simplefb_formats[] = {
 	{ "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0} },
+	{ "a8b8g8r8", 32, {0, 8}, {8, 8}, {16, 8}, {24, 8} },
 };
 
 struct simplefb_params {