[PARISC] I/O-Space must be ioremap_nocache()'d
Addresses in F-space must be accessed uncached on most parisc machines.
Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index ad6d3b2..719b863 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -12,6 +12,7 @@
* (C) Copyright 2001 John Marvin <jsm fc hp com>
* (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
* (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
+ * (C) Copyright 2006 Helge Deller <deller@gmx.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -388,43 +389,34 @@
return local_irq;
}
-static struct uart_port serial[] = {
- {
- .iotype = UPIO_PORT,
- .line = 0,
- .type = PORT_16550A,
- .uartclk = 115200*16,
- .fifosize = 16,
- },
- {
- .iotype = UPIO_PORT,
- .line = 1,
- .type = PORT_16550A,
- .uartclk = 115200*16,
- .fifosize = 16,
- }
-};
-
static void __devinit superio_serial_init(void)
{
#ifdef CONFIG_SERIAL_8250
int retval;
-
- serial[0].iobase = sio_dev.sp1_base;
- serial[0].irq = SP1_IRQ;
- spin_lock_init(&serial[0].lock);
+ struct uart_port serial_port;
- retval = early_serial_setup(&serial[0]);
+ memset(&serial_port, 0, sizeof(serial_port));
+ serial_port.iotype = UPIO_PORT;
+ serial_port.type = PORT_16550A;
+ serial_port.uartclk = 115200*16;
+ serial_port.fifosize = 16;
+ spin_lock_init(&serial_port.lock);
+
+ /* serial port #1 */
+ serial_port.iobase = sio_dev.sp1_base;
+ serial_port.irq = SP1_IRQ;
+ serial_port.line = 0;
+ retval = early_serial_setup(&serial_port);
if (retval < 0) {
printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
return;
}
- serial[1].iobase = sio_dev.sp2_base;
- serial[1].irq = SP2_IRQ;
- spin_lock_init(&serial[1].lock);
- retval = early_serial_setup(&serial[1]);
-
+ /* serial port #2 */
+ serial_port.iobase = sio_dev.sp2_base;
+ serial_port.irq = SP2_IRQ;
+ serial_port.line = 1;
+ retval = early_serial_setup(&serial_port);
if (retval < 0)
printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
#endif /* CONFIG_SERIAL_8250 */