irqchip/gic-v2: Parse and export virtual GIC information
For now, the firmware tables are parsed 2 times: once in the GIC
drivers, the other timer when initializing the vGIC. It means code
duplication and make more tedious to add the support for another
firmware table (like ACPI).
Introduce a new structure and set of helpers to get/set the virtual GIC
information. Also fill up the structure for GICv2.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 7a73786..3f1d9fd 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -102,6 +102,8 @@
static struct gic_chip_data gic_data[CONFIG_ARM_GIC_MAX_NR] __read_mostly;
+static struct gic_kvm_info gic_v2_kvm_info;
+
#ifdef CONFIG_GIC_NON_BANKED
static void __iomem *gic_get_percpu_base(union gic_base *base)
{
@@ -1189,6 +1191,29 @@
return true;
}
+static void __init gic_of_setup_kvm_info(struct device_node *node)
+{
+ int ret;
+ struct resource *vctrl_res = &gic_v2_kvm_info.vctrl;
+ struct resource *vcpu_res = &gic_v2_kvm_info.vcpu;
+
+ gic_v2_kvm_info.type = GIC_V2;
+
+ gic_v2_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);
+ if (!gic_v2_kvm_info.maint_irq)
+ return;
+
+ ret = of_address_to_resource(node, 2, vctrl_res);
+ if (ret)
+ return;
+
+ ret = of_address_to_resource(node, 3, vcpu_res);
+ if (ret)
+ return;
+
+ gic_set_kvm_info(&gic_v2_kvm_info);
+}
+
int __init
gic_of_init(struct device_node *node, struct device_node *parent)
{
@@ -1218,8 +1243,10 @@
__gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset,
&node->fwnode);
- if (!gic_cnt)
+ if (!gic_cnt) {
gic_init_physaddr(node);
+ gic_of_setup_kvm_info(node);
+ }
if (parent) {
irq = irq_of_parse_and_map(node, 0);
@@ -1248,6 +1275,10 @@
static struct
{
phys_addr_t cpu_phys_base;
+ u32 maint_irq;
+ int maint_irq_mode;
+ phys_addr_t vctrl_base;
+ phys_addr_t vcpu_base;
} acpi_data __initdata;
static int __init
@@ -1272,6 +1303,12 @@
return -EINVAL;
acpi_data.cpu_phys_base = gic_cpu_base;
+ acpi_data.maint_irq = processor->vgic_interrupt;
+ acpi_data.maint_irq_mode = (processor->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
+ ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
+ acpi_data.vctrl_base = processor->gich_base_address;
+ acpi_data.vcpu_base = processor->gicv_base_address;
+
cpu_base_assigned = 1;
return 0;
}
@@ -1302,6 +1339,41 @@
#define ACPI_GICV2_DIST_MEM_SIZE (SZ_4K)
#define ACPI_GIC_CPU_IF_MEM_SIZE (SZ_8K)
+#define ACPI_GICV2_VCTRL_MEM_SIZE (SZ_4K)
+#define ACPI_GICV2_VCPU_MEM_SIZE (SZ_8K)
+
+static void __init gic_acpi_setup_kvm_info(void)
+{
+ int irq;
+ struct resource *vctrl_res = &gic_v2_kvm_info.vctrl;
+ struct resource *vcpu_res = &gic_v2_kvm_info.vcpu;
+
+ gic_v2_kvm_info.type = GIC_V2;
+
+ if (!acpi_data.vctrl_base)
+ return;
+
+ vctrl_res->flags = IORESOURCE_MEM;
+ vctrl_res->start = acpi_data.vctrl_base;
+ vctrl_res->end = vctrl_res->start + ACPI_GICV2_VCTRL_MEM_SIZE - 1;
+
+ if (!acpi_data.vcpu_base)
+ return;
+
+ vcpu_res->flags = IORESOURCE_MEM;
+ vcpu_res->start = acpi_data.vcpu_base;
+ vcpu_res->end = vcpu_res->start + ACPI_GICV2_VCPU_MEM_SIZE - 1;
+
+ irq = acpi_register_gsi(NULL, acpi_data.maint_irq,
+ acpi_data.maint_irq_mode,
+ ACPI_ACTIVE_HIGH);
+ if (irq <= 0)
+ return;
+
+ gic_v2_kvm_info.maint_irq = irq;
+
+ gic_set_kvm_info(&gic_v2_kvm_info);
+}
static int __init gic_v2_acpi_init(struct acpi_subtable_header *header,
const unsigned long end)
@@ -1359,6 +1431,8 @@
if (IS_ENABLED(CONFIG_ARM_GIC_V2M))
gicv2m_init(NULL, gic_data[0].domain);
+ gic_acpi_setup_kvm_info();
+
return 0;
}
IRQCHIP_ACPI_DECLARE(gic_v2, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,