leds: Add support for hardware accelerated LED flashing

Extends the leds subsystem with a blink_set() callback function which can
be optionally implemented by a LED driver. If implemented, the driver can use
the hardware acceleration for blinking a LED.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index cf3a6d4..659448e 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -152,7 +152,11 @@
 	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled by a programmable timer
-	  via sysfs. If unsure, say Y.
+	  via sysfs. Some LED hardware can be programmed to start
+	  blinking the LED without any further software interaction.
+	  For more details read Documentation/leds-class.txt.
+
+	  If unsure, say Y.
 
 config LEDS_TRIGGER_IDE_DISK
 	bool "LED IDE Disk Trigger"
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index ed9ff02..82c55d6 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -77,8 +77,21 @@
 		count++;
 
 	if (count == size) {
-		timer_data->delay_on = state;
-		mod_timer(&timer_data->timer, jiffies + 1);
+		if (timer_data->delay_on != state) {
+			/* the new value differs from the previous */
+			timer_data->delay_on = state;
+
+			/* deactivate previous settings */
+			del_timer_sync(&timer_data->timer);
+
+			/* try to activate hardware acceleration, if any */
+			if (!led_cdev->blink_set ||
+			    led_cdev->blink_set(led_cdev,
+				&timer_data->delay_on, &timer_data->delay_off)) {
+				/* no hardware acceleration, blink via timer */
+				mod_timer(&timer_data->timer, jiffies + 1);
+			}
+		}
 		ret = count;
 	}
 
@@ -110,8 +123,21 @@
 		count++;
 
 	if (count == size) {
-		timer_data->delay_off = state;
-		mod_timer(&timer_data->timer, jiffies + 1);
+		if (timer_data->delay_off != state) {
+			/* the new value differs from the previous */
+			timer_data->delay_off = state;
+
+			/* deactivate previous settings */
+			del_timer_sync(&timer_data->timer);
+
+			/* try to activate hardware acceleration, if any */
+			if (!led_cdev->blink_set ||
+			    led_cdev->blink_set(led_cdev,
+				&timer_data->delay_on, &timer_data->delay_off)) {
+				/* no hardware acceleration, blink via timer */
+				mod_timer(&timer_data->timer, jiffies + 1);
+			}
+		}
 		ret = count;
 	}
 
@@ -143,6 +169,13 @@
 	if (rc)
 		goto err_out_delayon;
 
+	/* If there is hardware support for blinking, start one
+	 * user friendly blink rate chosen by the driver.
+	 */
+	if (led_cdev->blink_set)
+		led_cdev->blink_set(led_cdev,
+			&timer_data->delay_on, &timer_data->delay_off);
+
 	return;
 
 err_out_delayon: