diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile
new file mode 100644
index 0000000..260f456
--- /dev/null
+++ b/arch/xtensa/boot/Makefile
@@ -0,0 +1,37 @@
+#
+# arch/xtensa/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+
+CFLAGS 		+= -fno-builtin -Iarch/$(ARCH)/boot/include
+HOSTFLAGS	+= -Iarch/$(ARCH)/boot/include
+
+BIG_ENDIAN	:= $(shell echo -e "\#ifdef __XTENSA_EL__\nint little;\n\#else\nint big;\n\#endif" | $(CC) -E -|grep -c big)
+
+
+export CFLAGS
+export AFLAGS
+export BIG_ENDIAN
+
+# Subdirs for the boot loader(s)
+
+bootdir-$(CONFIG_XTENSA_PLATFORM_ISS)	 += boot-elf
+bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf
+
+subdir-y	:= lib/
+
+subdir-y	+= boot-elf/ boot-redboot/
+
+zImage zImage.initrd Image Image.initrd: $(bootdir-y)
+
+$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
+	      $(addprefix $(obj)/,$(host-progs))
+	$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
+
+
+
diff --git a/arch/xtensa/boot/boot-elf/Makefile b/arch/xtensa/boot/boot-elf/Makefile
new file mode 100644
index 0000000..f6ef6a3
--- /dev/null
+++ b/arch/xtensa/boot/boot-elf/Makefile
@@ -0,0 +1,52 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+GZIP = gzip
+GZIP_FLAGS = -v9fc
+
+ifeq ($(BIG_ENDIAN),1)
+OBJCOPY_ARGS    := -O elf32-xtensa-be
+else
+OBJCOPY_ARGS    := -O elf32-xtensa-le
+endif
+
+export OBJCOPY_ARGS
+
+boot-y		:= bootstrap.o
+
+OBJS		:= $(addprefix $(obj)/,$(boot-y))
+
+Image:	vmlinux $(OBJS)
+	$(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \
+		vmlinux vmlinux.tmp
+	$(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \
+		--add-section image=vmlinux.tmp \
+		--set-section-flags image=contents,alloc,load,load,data \
+		$(OBJS) $@.tmp
+	$(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \
+		-T arch/$(ARCH)/boot/boot-elf/boot.ld \
+		-o arch/$(ARCH)/boot/$@.elf $@.tmp
+	rm -f $@.tmp vmlinux.tmp
+
+Image.initrd:	vmlinux $(OBJS)
+	$(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \
+		--add-section .initrd=arch/$(ARCH)/boot/ramdisk \
+		--set-section-flags .initrd=contents,alloc,load,load,data \
+		vmlinux vmlinux.tmp
+	$(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \
+		--add-section image=vmlinux.tmp \
+		--set-section-flags image=contents,alloc,load,load,data \
+		$(OBJS) $@.tmp
+	$(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \
+		-T arch/$(ARCH)/boot/boot-elf/boot.ld \
+		-o arch/$(ARCH)/boot/$@.elf $@.tmp
+	rm -f $@.tmp vmlinux.tmp
+
+
+zImage:	Image
+
+zImage.initrd:	Image.initrd
+
diff --git a/arch/xtensa/boot/boot-elf/boot.ld b/arch/xtensa/boot/boot-elf/boot.ld
new file mode 100644
index 0000000..4ab06a0
--- /dev/null
+++ b/arch/xtensa/boot/boot-elf/boot.ld
@@ -0,0 +1,71 @@
+OUTPUT_ARCH(xtensa)
+
+SECTIONS
+{
+	.start 0xD0000000 : { *(.start) }
+
+	.text 0xD0000000:
+	{
+		__reloc_start = . ;
+		_text_start = . ;
+		*(.literal .text.literal .text)
+		_text_end = . ;
+	}
+
+	.rodata ALIGN(0x04):
+	{
+		*(.rodata)
+		*(.rodata1)
+	}
+
+	.data ALIGN(0x04):
+	{
+		*(.data)
+		*(.data1)
+		*(.sdata)
+		*(.sdata2)
+		*(.got.plt)
+		*(.got)
+		*(.dynamic)
+	}
+
+	__reloc_end = . ;
+
+	.initrd ALIGN(0x10) :
+	{
+		boot_initrd_start = . ;
+		*(.initrd)
+		boot_initrd_end = .;
+	}
+
+	. = ALIGN(0x10);
+	__image_load = . ;
+	.image 0xd0001000:
+	{
+		_image_start = .;
+		*(image)
+		. = (. + 3) & ~ 3;
+		_image_end = .	;
+	}
+
+
+	.bss ((LOADADDR(.image) + SIZEOF(.image) + 3) & ~ 3):
+	{
+		__bss_start = .;
+		*(.sbss)
+		*(.scommon)
+		*(.dynbss)
+		*(.bss)
+		__bss_end = .;
+	}
+	_end = .;
+	_param_start = .;
+
+	.ResetVector.text 0xfe000020 :
+	{
+		*(.ResetVector.text)
+	}
+
+
+	PROVIDE (end = .);
+}
diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S
new file mode 100644
index 0000000..7cba94a
--- /dev/null
+++ b/arch/xtensa/boot/boot-elf/bootstrap.S
@@ -0,0 +1,37 @@
+
+#include <xtensa/config/specreg.h>
+#include <xtensa/config/core.h>
+
+#include <linux/config.h>
+#include <asm/bootparam.h>
+
+
+/* ResetVector
+ */
+	.section        .ResetVector.text, "ax"
+	.global         _ResetVector
+_ResetVector:
+	_j reset
+	.align 4
+RomInitAddr:
+	.word 0xd0001000
+RomBootParam:
+	.word _bootparam
+reset:
+	l32r    a0, RomInitAddr
+	l32r	a2, RomBootParam
+	movi	a3, 0
+	movi	a4, 0
+	jx      a0
+
+	.align 4
+	.section .bootstrap.data, "aw"
+
+	.globl _bootparam
+_bootparam:
+	.short	BP_TAG_FIRST
+	.short	4
+	.long	BP_VERSION
+	.short	BP_TAG_LAST
+	.short	0
+	.long	0
diff --git a/arch/xtensa/boot/boot-redboot/Makefile b/arch/xtensa/boot/boot-redboot/Makefile
new file mode 100644
index 0000000..ca8a68b
--- /dev/null
+++ b/arch/xtensa/boot/boot-redboot/Makefile
@@ -0,0 +1,35 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+GZIP = gzip
+GZIP_FLAGS = -v9fc
+ifeq ($(BIG_ENDIAN),1)
+OBJCOPY_ARGS 	:= -O elf32-xtensa-be
+else
+OBJCOPY_ARGS 	:= -O elf32-xtensa-le
+endif
+
+LD_ARGS	= -T $(obj)/boot.ld
+
+boot-y	:= bootstrap.o
+
+OBJS	:= $(addprefix $(obj)/,$(boot-y))
+LIBS	:= arch/$(ARCH)/boot/lib/lib.a arch/$(ARCH)/lib/lib.a
+
+LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+
+zImage: vmlinux $(OBJS) $(LIBS)
+	$(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \
+		$(TOPDIR)/vmlinux vmlinux.tmp
+	gzip -vf9 vmlinux.tmp
+	$(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \
+		--add-section image=vmlinux.tmp.gz \
+		--set-section-flags image=contents,alloc,load,load,data \
+		$(OBJS) $@.tmp
+	$(LD) $(LD_ARGS) -o $@.elf $@.tmp $(LIBS) -L/xtensa-elf/lib $(LIBGCC)
+	$(OBJCOPY) -S -O binary $@.elf arch/$(ARCH)/boot/images/$@.redboot
+#	rm -f $@.tmp $@.elf vmlinux.tmp.gz
+
diff --git a/arch/xtensa/boot/boot-redboot/boot.ld b/arch/xtensa/boot/boot-redboot/boot.ld
new file mode 100644
index 0000000..65b7264
--- /dev/null
+++ b/arch/xtensa/boot/boot-redboot/boot.ld
@@ -0,0 +1,66 @@
+OUTPUT_ARCH(xtensa)
+
+SECTIONS
+{
+	.start 0xD0200000 : { *(.start) }
+
+	.text :
+	{
+		__reloc_start = . ;
+		_text_start = . ;
+		*(.literal .text.literal .text)
+		_text_end = . ;
+	}
+
+	.rodata ALIGN(0x04):
+	{
+		*(.rodata)
+		*(.rodata1)
+	}
+
+	.data ALIGN(0x04):
+	{
+		*(.data)
+		*(.data1)
+		*(.sdata)
+		*(.sdata2)
+		*(.got.plt)
+		*(.got)
+		*(.dynamic)
+	}
+
+	__reloc_end = . ;
+
+	.initrd ALIGN(0x10) :
+	{
+		boot_initrd_start = . ;
+		*(.initrd)
+		boot_initrd_end = .;
+	}
+
+	. = ALIGN(0x10);
+	__image_load = . ;
+	.image 0xd0001000: AT(__image_load)
+	{
+		_image_start = .;
+		*(image)
+		. = (. + 3) & ~ 3;
+		_image_end = .	;
+	}
+
+
+	.bss ((LOADADDR(.image) + SIZEOF(.image) + 3) & ~ 3):
+	{
+		__bss_start = .;
+		*(.sbss)
+		*(.scommon)
+		*(.dynbss)
+		*(.bss)
+		__bss_end = .;
+	}
+	_end = .;
+	_param_start = .;
+
+
+	PROVIDE (end = .);
+}
diff --git a/arch/xtensa/boot/boot-redboot/bootstrap.S b/arch/xtensa/boot/boot-redboot/bootstrap.S
new file mode 100644
index 0000000..ee636b0
--- /dev/null
+++ b/arch/xtensa/boot/boot-redboot/bootstrap.S
@@ -0,0 +1,246 @@
+
+#define _ASMLANGUAGE
+#include <xtensa/config/specreg.h>
+#include <xtensa/config/core.h>
+#include <xtensa/cacheasm.h>
+
+	/*
+	 * RB-Data: RedBoot data/bss
+	 * P:	    Boot-Parameters
+	 * L:	    Kernel-Loader
+	 *
+	 * The Linux-Kernel image including the loader must be loaded
+	 * to a position so that the kernel and the boot parameters
+	 * can fit in the space before the load address.
+	 *  ______________________________________________________
+	 * |_RB-Data_|_P_|__________|_L_|___Linux-Kernel___|______|
+	 *                          ^
+	 *                          ^ Load address
+	 *  ______________________________________________________
+	 * |___Linux-Kernel___|_P_|_L_|___________________________|
+	 *
+	 * The loader copies the parameter to the position that will
+	 * be the end of the kernel and itself to the end of the
+	 * parameter list.
+	 */
+
+/* Make sure we have enough space for the 'uncompressor' */
+
+#define STACK_SIZE 32768
+#define HEAP_SIZE (131072*4)
+
+	# a2: Parameter list
+	# a3: Size of parameter list
+
+	.section .start, "ax"
+
+	.globl __start
+	/* this must be the first byte of the loader! */
+__start:
+	entry	sp, 32		# we do not intend to return
+	_call0	_start
+__start_a0:
+	.align 4
+
+	.section .text, "ax"
+	.begin literal_prefix .text
+
+	/* put literals in here! */
+
+	.globl _start
+_start:
+
+	/* 'reset' window registers */
+
+	movi	a4, 1
+	wsr	a4, PS
+	rsync
+
+	rsr	a5, WINDOWBASE
+	ssl	a5
+	sll	a4, a4
+	wsr	a4, WINDOWSTART
+	rsync
+
+	movi	a4, 0x00040000
+	wsr	a4, PS
+	rsync
+
+	/* copy the loader to its address
+	 * Note: The loader itself is a very small piece, so we assume we
+	 *       don't partially overlap. We also assume (even more important)
+	 *	 that the kernel image is out of the way. Usually, when the
+	 *	 load address of this image is not at an arbitrary address,
+	 *	 but aligned to some 10K's we shouldn't overlap.
+	 */
+
+	/* Note: The assembler cannot relax "addi a0, a0, ..." to an
+	   l32r, so we load to a4 first. */
+
+	addi	a4, a0, __start - __start_a0
+	mov	a0, a4
+	movi	a4, __start
+	movi	a5, __reloc_end
+
+	# a0: address where this code has been loaded
+	# a4: compiled address of __start
+	# a5: compiled end address
+
+	mov.n	a7, a0
+	mov.n	a8, a4
+
+1:
+	l32i	a10, a7, 0
+	l32i	a11, a7, 4
+	s32i	a10, a8, 0
+	s32i	a11, a8, 4
+	l32i	a10, a7, 8
+	l32i	a11, a7, 12
+	s32i	a10, a8, 8
+	s32i	a11, a8, 12
+	addi	a8, a8, 16
+	addi	a7, a7, 16
+	blt	a8, a5, 1b
+
+
+	/* We have to flush and invalidate the caches here before we jump. */
+
+#if XCHAL_DCACHE_IS_WRITEBACK
+	dcache_writeback_all  a5, a6
+#endif
+	icache_invalidate_all a5, a6
+
+	movi	a11, _reloc
+	jx	a11
+
+	.globl _reloc
+_reloc:
+
+	/* RedBoot is now at the end of the memory, so we don't have
+	 * to copy the parameter list. Keep the code around; in case
+	 * we need it again. */
+#if 0
+	# a0: load address
+	# a2: start address of parameter list
+	# a3: length of parameter list
+	# a4: __start
+
+	/* copy the parameter list out of the way */
+
+	movi	a6, _param_start
+	add	a3, a2, a3
+2:
+	l32i	a8, a2, 0
+	s32i	a8, a6, 0
+	addi	a2, a2, 4
+	addi	a6, a6, 4
+	blt	a2, a3, 2b
+#endif
+
+	/* clear BSS section */
+	movi	a6, __bss_start
+	movi	a7, __bss_end
+	movi.n	a5, 0
+3:
+	s32i	a5, a6, 0
+	addi	a6, a6, 4
+	blt	a6, a7, 3b
+
+	movi	a5, -16
+	movi	a1, _stack + STACK_SIZE
+	and	a1, a1, a5
+
+	/* Uncompress the kernel */
+
+	# a0: load address
+	# a2: boot parameter
+	# a4: __start
+
+	movi	a3, __image_load
+	sub	a4, a3, a4
+	add	a8, a0, a4
+
+	# a1  Stack
+	# a8(a4)  Load address of the image
+
+	movi	a6, _image_start
+	movi	a10, _image_end
+	movi	a7, 0x1000000
+	sub	a11, a10, a6
+	movi	a9, complen
+	s32i	a11, a9, 0
+
+	movi	a0, 0
+
+	# a6 destination
+	# a7 maximum size of destination
+	# a8 source
+	# a9 ptr to length
+
+	.extern gunzip
+	movi	a4, gunzip
+	beqz	a4, 1f
+
+	callx4	a4
+
+	j	2f
+
+
+	# a6 destination start
+	# a7 maximum size of destination
+	# a8 source start
+	# a9 ptr to length
+	# a10 destination end
+
+1:
+        l32i    a9, a8, 0
+        l32i    a11, a8, 4
+        s32i    a9, a6, 0
+        s32i    a11, a6, 4
+        l32i    a9, a8, 8
+        l32i    a11, a8, 12
+        s32i    a9, a6, 8
+        s32i    a11, a6, 12
+        addi    a6, a6, 16
+        addi    a8, a8, 16
+        blt     a6, a10, 1b
+
+
+	/* jump to the kernel */
+2:
+#if XCHAL_DCACHE_IS_WRITEBACK
+	dcache_writeback_all a5, a6
+#endif
+	icache_invalidate_all a5, a6
+
+	movi	a5, __start
+	movi	a3, boot_initrd_start
+	movi	a4, boot_initrd_end
+	sub	a3, a3, a5
+	sub	a4, a4, a5
+	add	a3, a0, a3
+	add	a4, a0, a4
+
+	# a2  Boot parameter list
+	# a3  initrd_start (virtual load address)
+	# a4  initrd_end   (virtual load address)
+
+	movi	a0, _image_start
+	jx	a0
+
+	.align 16
+	.data
+	.globl avail_ram
+avail_ram:
+	.long	_heap
+	.globl end_avail
+end_avail:
+	.long	_heap + HEAP_SIZE
+
+	.comm _stack, STACK_SIZE
+	.comm _heap, HEAP_SIZE
+
+	.globl end_avail
+	.comm complen, 4
+
+	.end	literal_prefix
diff --git a/arch/xtensa/boot/include/zlib.h b/arch/xtensa/boot/include/zlib.h
new file mode 100644
index 0000000..ea29b62
--- /dev/null
+++ b/arch/xtensa/boot/include/zlib.h
@@ -0,0 +1,433 @@
+/*
+ * BK Id: SCCS/s.zlib.h 1.8 05/18/01 15:17:23 cort
+ */
+/*
+ * This file is derived from zlib.h and zconf.h from the zlib-0.95
+ * distribution by Jean-loup Gailly and Mark Adler, with some additions
+ * by Paul Mackerras to aid in implementing Deflate compression and
+ * decompression for PPP packets.
+ */
+
+/*
+ *  ==FILEVERSION 960122==
+ *
+ * This marker is used by the Linux installation script to determine
+ * whether an up-to-date version of this file is already installed.
+ */
+
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 0.95, Aug 16th, 1995.
+
+  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
+ */
+
+#ifndef _ZLIB_H
+#define _ZLIB_H
+
+/* #include "zconf.h" */	/* included directly here */
+
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
+
+/*
+     The library does not install any signal handler. It is recommended to
+  add at least a handler for SIGSEGV when decompressing; the library checks
+  the consistency of the input data whenever possible but may go nuts
+  for some forms of corrupted input.
+ */
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
+ * at addresses which are not a multiple of their size.
+ * Under DOS, -DFAR=far or -DFAR=__far may be needed.
+ */
+
+#ifndef STDC
+#  if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
+#    define STDC
+#  endif
+#endif
+
+#ifdef	__MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
+#  include <unix.h>
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+#ifndef FAR
+#  define FAR
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            1 << (windowBits+2)   +  1 << (memLevel+9)
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+typedef unsigned char  Byte;  /* 8 bits */
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+typedef Byte FAR Bytef;
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void FAR *voidpf;
+   typedef void     *voidp;
+#else
+   typedef Byte FAR *voidpf;
+   typedef Byte     *voidp;
+#endif
+
+/* end of original zconf.h */
+
+#define ZLIB_VERSION "0.95P"
+
+/*
+     The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed
+  data.  This version of the library supports only one compression method
+  (deflation) but other algorithms may be added later and will have the same
+  stream interface.
+
+     For compression the application must provide the output buffer and
+  may optionally provide the input buffer for optimization. For decompression,
+  the application must provide the input buffer and may optionally provide
+  the output buffer for optimization.
+
+     Compression can be done in a single step if the buffers are large
+  enough (for example if an input file is mmap'ed), or can be done by
+  repeated calls of the compression function.  In the latter case, the
+  application must provide more input and/or consume the output
+  (providing more output space) before each call.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void   (*free_func)  OF((voidpf opaque, voidpf address, uInt nbytes));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    Bytef    *next_in;  /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total nb of input bytes read so far */
+
+    Bytef    *next_out; /* next output byte should be put there */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total nb of bytes output so far */
+
+    char     *msg;      /* last error message, NULL if no error */
+    struct internal_state FAR *state; /* not visible by applications */
+
+    alloc_func zalloc;  /* used to allocate the internal state */
+    free_func  zfree;   /* used to free the internal state */
+    voidp      opaque;  /* private data object passed to zalloc and zfree */
+
+    Byte     data_type; /* best guess about the data type: ascii or binary */
+
+} z_stream;
+
+/*
+   The application must update next_in and avail_in when avail_in has
+   dropped to zero. It must update next_out and avail_out when avail_out
+   has dropped to zero. The application must initialize zalloc, zfree and
+   opaque before calling the init function. All other fields are set by the
+   compression library and must not be updated by the application.
+
+   The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree. This can be useful for custom
+   memory management. The compression library attaches no meaning to the
+   opaque value.
+
+   zalloc must return Z_NULL if there is not enough memory for the object.
+   On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this
+   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+   pointers returned by zalloc for objects of exactly 65536 bytes *must*
+   have their offset normalized to zero. The default allocation function
+   provided by this library ensures this (see zutil.c). To reduce memory
+   requirements and avoid any allocation of 64K objects, at the expense of
+   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+
+   The fields total_in and total_out can be used for statistics or
+   progress reports. After compression, total_in holds the total size of
+   the uncompressed data and may be saved for use in the decompressor
+   (particularly if the decompressor wants to decompress everything in
+   a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1
+#define Z_FULL_FLUSH    2
+#define Z_SYNC_FLUSH    3 /* experimental: partial_flush + byte align */
+#define Z_FINISH        4
+#define Z_PACKET_FLUSH	5
+/* See deflate() below for the usage of these constants */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+/* error codes for the compression/decompression functions */
+
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_DEFAULT_STRATEGY    0
+
+#define Z_BINARY   0
+#define Z_ASCII    1
+#define Z_UNKNOWN  2
+/* Used to set the data_type field */
+
+#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+
+extern char *zlib_version;
+/* The application can compare zlib_version and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is
+   not compatible with the zlib.h header file used by the application.
+ */
+
+                        /* basic functions */
+
+extern int inflateInit OF((z_stream *strm));
+/*
+     Initializes the internal stream state for decompression. The fields
+   zalloc and zfree must be initialized before by the caller.  If zalloc and
+   zfree are set to Z_NULL, inflateInit updates them to use default allocation
+   functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory.  msg is set to null if there is no error message.
+   inflateInit does not perform any decompression: this will be done by
+   inflate().
+*/
+
+
+extern int inflate OF((z_stream *strm, int flush));
+/*
+  Performs one or both of the following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), next_in is updated and processing
+    will resume at this point for the next call of inflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() always provides as much output as possible
+    (until there is no more input data or no more space in the output buffer).
+
+  Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating the next_* and avail_* values accordingly.
+  The application can consume the uncompressed output when it wants, for
+  example when the output buffer is full (avail_out == 0), or after each
+  call of inflate().
+
+    If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
+  inflate flushes as much output as possible to the output buffer. The
+  flushing behavior of inflate is not specified for values of the flush
+  parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
+  current implementation actually flushes as much output as possible
+  anyway.  For Z_PACKET_FLUSH, inflate checks that once all the input data
+  has been consumed, it is expecting to see the length field of a stored
+  block; if not, it returns Z_DATA_ERROR.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error. However if all decompression is to be performed in a single step
+  (a single call of inflate), the parameter flush should be set to
+  Z_FINISH. In this case all pending input is processed and all pending
+  output is flushed; avail_out must be large enough to hold all the
+  uncompressed data. (The size of the uncompressed data may have been saved
+  by the compressor for this purpose.) The next operation on this stream must
+  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+  is never required, but can be used to inform inflate that a faster routine
+  may be used for the single inflate() call.
+
+    inflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if the end of the
+  compressed data has been reached and all uncompressed output has been
+  produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
+  the stream structure was inconsistent (for example if next_in or next_out
+  was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
+  progress is possible or if there was not enough room in the output buffer
+  when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
+  call inflateSync to look for a good compression block.  */
+
+
+extern int inflateEnd OF((z_stream *strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+
+     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+   was inconsistent. In the error case, msg may be set but then points to a
+   static string (which must not be deallocated).
+*/
+
+                        /* advanced functions */
+
+extern int inflateInit2 OF((z_stream *strm,
+                            int  windowBits));
+/*
+     This is another version of inflateInit with more compression options. The
+   fields next_out, zalloc and zfree must be initialized before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library (the value 16 will be allowed soon). The
+   default value is 15 if inflateInit is used instead. If a compressed stream
+   with a larger window size is given as input, inflate() will return with
+   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
+
+     If next_out is not null, the library will use this buffer for the history
+   buffer; the buffer must either be large enough to hold the entire output
+   data, or have at least 1<<windowBits bytes.  If next_out is null, the
+   library will allocate its own buffer (and leave next_out null). next_in
+   need not be provided here but must be provided by the application for the
+   next call of inflate().
+
+     If the history buffer is provided by the application, next_out must
+   never be changed by the application since the decompressor maintains
+   history information inside this buffer from call to call; the application
+   can only reset next_out to the beginning of the history buffer when
+   avail_out is zero and all output has been consumed.
+
+      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
+   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
+   windowBits < 8). msg is set to null if there is no error message.
+   inflateInit2 does not perform any decompression: this will be done by
+   inflate().
+*/
+
+extern int inflateSync OF((z_stream *strm));
+/*
+    Skips invalid compressed data until the special marker (see deflate()
+  above) can be found, or until all available input is skipped. No output
+  is provided.
+
+    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
+  if no more input was provided, Z_DATA_ERROR if no marker has been found,
+  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+  case, the application may save the current current value of total_in which
+  indicates where valid compressed data was found. In the error case, the
+  application may repeatedly call inflateSync, providing more input each time,
+  until success or end of the input data.
+*/
+
+extern int inflateReset OF((z_stream *strm));
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate all the internal decompression state.
+   The stream will keep attributes that may have been set by inflateInit2.
+
+      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+extern int inflateIncomp OF((z_stream *strm));
+/*
+     This function adds the data at next_in (avail_in bytes) to the output
+   history without performing any output.  There must be no pending output,
+   and the decompressor must be expecting to see the start of a block.
+   Calling this function is equivalent to decompressing a stored block
+   containing the data at next_in (except that the data is not output).
+*/
+
+                        /* checksum functions */
+
+/*
+     This function is not related to compression but is exported
+   anyway because it might be useful in applications using the
+   compression library.
+*/
+
+extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
+
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum. If buf is NULL, this function returns
+   the required initial value for the checksum.
+   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster. Usage example:
+
+     uLong adler = adler32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+
+#ifndef _Z_UTIL_H
+    struct internal_state {int dummy;}; /* hack for buggy compilers */
+#endif
+
+#endif /* _ZLIB_H */
diff --git a/arch/xtensa/boot/lib/Makefile b/arch/xtensa/boot/lib/Makefile
new file mode 100644
index 0000000..c0a74dc
--- /dev/null
+++ b/arch/xtensa/boot/lib/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for some libs needed by zImage.
+#
+
+
+lib-y := zlib.o zmem.o
diff --git a/arch/xtensa/boot/lib/memcpy.S b/arch/xtensa/boot/lib/memcpy.S
new file mode 100644
index 0000000..a029f5d
--- /dev/null
+++ b/arch/xtensa/boot/lib/memcpy.S
@@ -0,0 +1,36 @@
+/*
+ *  arch/xtensa/lib/memcpy.S
+ *
+ *  ANSI C standard library function memcpy
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file "COPYING" in the main directory of
+ *  this archive for more details.
+ *
+ *  Copyright (C) 2002 Tensilica Inc.
+ */
+
+#define _ASMLANGUAGE
+#include <xtensa/config/core.h>
+
+.text
+.align	4
+.global	bcopy
+.type   bcopy,@function
+bcopy:
+        movi    a14, xthal_bcopy        // a14 safe to use regardless of whether caller
+                                        //   used call4 or call8 (can't have used call12)
+        jx      a14                     // let the Core HAL do the work
+
+.text
+.align	4
+.global	memcpy
+.type   memcpy,@function
+memcpy:
+.global	memmove
+.type   memmove,@function
+memmove:
+        movi    a14, xthal_memcpy      // a14 safe to use regardless of whether caller
+                                        //   used call4 or call8 (can't have used call12)
+        jx      a14                     // let the Core HAL do the work
+
diff --git a/arch/xtensa/boot/lib/zlib.c b/arch/xtensa/boot/lib/zlib.c
new file mode 100644
index 0000000..e3859f6
--- /dev/null
+++ b/arch/xtensa/boot/lib/zlib.c
@@ -0,0 +1,2150 @@
+/*
+ * BK Id: SCCS/s.zlib.c 1.8 05/18/01 15:17:24 cort
+ */
+/*
+ * This file is derived from various .h and .c files from the zlib-0.95
+ * distribution by Jean-loup Gailly and Mark Adler, with some additions
+ * by Paul Mackerras to aid in implementing Deflate compression and
+ * decompression for PPP packets.  See zlib.h for conditions of
+ * distribution and use.
+ *
+ * Changes that have been made include:
+ * - changed functions not used outside this file to "local"
+ * - added minCompression parameter to deflateInit2
+ * - added Z_PACKET_FLUSH (see zlib.h for details)
+ * - added inflateIncomp
+ *
+ */
+
+/*+++++*/
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */
+
+#define _Z_UTIL_H
+
+#include "zlib.h"
+
+#ifndef local
+#  define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+#define FAR
+
+typedef unsigned char  uch;
+typedef uch FAR uchf;
+typedef unsigned short ush;
+typedef ush FAR ushf;
+typedef unsigned long  ulg;
+
+extern char *z_errmsg[]; /* indexed by 1-zlib_error */
+
+#define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err)
+/* To be used only when the state is known to be valid */
+
+#ifndef NULL
+#define NULL	((void *) 0)
+#endif
+
+        /* common constants */
+
+#define DEFLATED   8
+
+#ifndef DEF_WBITS
+#  define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES    2
+/* The three kinds of block type */
+
+#define MIN_MATCH  3
+#define MAX_MATCH  258
+/* The minimum and maximum match lengths */
+
+         /* functions */
+
+#include <linux/string.h>
+#define zmemcpy memcpy
+#define zmemzero(dest, len)	memset(dest, 0, len)
+
+/* Diagnostic functions */
+#ifdef DEBUG_ZLIB
+#  include <stdio.h>
+#  ifndef verbose
+#    define verbose 0
+#  endif
+#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+#  define Trace(x) fprintf x
+#  define Tracev(x) {if (verbose) fprintf x ;}
+#  define Tracevv(x) {if (verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+
+typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len));
+
+/* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */
+/* void   zcfree  OF((voidpf opaque, voidpf ptr)); */
+
+#define ZALLOC(strm, items, size) \
+           (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr, size)	\
+	   (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size))
+#define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);}
+
+/* deflate.h -- internal compression state
+ * Copyright (C) 1995 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/*+++++*/
+/* infblock.h -- header to use infblock.c
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+struct inflate_blocks_state;
+typedef struct inflate_blocks_state FAR inflate_blocks_statef;
+
+local inflate_blocks_statef * inflate_blocks_new OF((
+    z_stream *z,
+    check_func c,               /* check function */
+    uInt w));                   /* window size */
+
+local int inflate_blocks OF((
+    inflate_blocks_statef *,
+    z_stream *,
+    int));                      /* initial return code */
+
+local void inflate_blocks_reset OF((
+    inflate_blocks_statef *,
+    z_stream *,
+    uLongf *));                  /* check value on output */
+
+local int inflate_blocks_free OF((
+    inflate_blocks_statef *,
+    z_stream *,
+    uLongf *));                  /* check value on output */
+
+local int inflate_addhistory OF((
+    inflate_blocks_statef *,
+    z_stream *));
+
+local int inflate_packet_flush OF((
+    inflate_blocks_statef *));
+
+/*+++++*/
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Huffman code lookup table entry--this entry is four bytes for machines
+   that have 16-bit pointers (e.g. PC's in the small or medium model). */
+
+typedef struct inflate_huft_s FAR inflate_huft;
+
+struct inflate_huft_s {
+  union {
+    struct {
+      Byte Exop;        /* number of extra bits or operation */
+      Byte Bits;        /* number of bits in this code or subcode */
+    } what;
+    uInt Nalloc;	/* number of these allocated here */
+    Bytef *pad;         /* pad structure to a power of 2 (4 bytes for */
+  } word;               /*  16-bit, 8 bytes for 32-bit machines) */
+  union {
+    uInt Base;          /* literal, length base, or distance base */
+    inflate_huft *Next; /* pointer to next level of table */
+  } more;
+};
+
+#ifdef DEBUG_ZLIB
+  local uInt inflate_hufts;
+#endif
+
+local int inflate_trees_bits OF((
+    uIntf *,                    /* 19 code lengths */
+    uIntf *,                    /* bits tree desired/actual depth */
+    inflate_huft * FAR *,       /* bits tree result */
+    z_stream *));               /* for zalloc, zfree functions */
+
+local int inflate_trees_dynamic OF((
+    uInt,                       /* number of literal/length codes */
+    uInt,                       /* number of distance codes */
+    uIntf *,                    /* that many (total) code lengths */
+    uIntf *,                    /* literal desired/actual bit depth */
+    uIntf *,                    /* distance desired/actual bit depth */
+    inflate_huft * FAR *,       /* literal/length tree result */
+    inflate_huft * FAR *,       /* distance tree result */
+    z_stream *));               /* for zalloc, zfree functions */
+
+local int inflate_trees_fixed OF((
+    uIntf *,                    /* literal desired/actual bit depth */
+    uIntf *,                    /* distance desired/actual bit depth */
+    inflate_huft * FAR *,       /* literal/length tree result */
+    inflate_huft * FAR *));     /* distance tree result */
+
+local int inflate_trees_free OF((
+    inflate_huft *,             /* tables to free */
+    z_stream *));               /* for zfree function */
+
+
+/*+++++*/
+/* infcodes.h -- header to use infcodes.c
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+struct inflate_codes_state;
+typedef struct inflate_codes_state FAR inflate_codes_statef;
+
+local inflate_codes_statef *inflate_codes_new OF((
+    uInt, uInt,
+    inflate_huft *, inflate_huft *,
+    z_stream *));
+
+local int inflate_codes OF((
+    inflate_blocks_statef *,
+    z_stream *,
+    int));
+
+local void inflate_codes_free OF((
+    inflate_codes_statef *,
+    z_stream *));
+
+
+/*+++++*/
+/* inflate.c -- zlib interface to inflate modules
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* inflate private state */
+struct internal_state {
+
+  /* mode */
+  enum {
+      METHOD,   /* waiting for method byte */
+      FLAG,     /* waiting for flag byte */
+      BLOCKS,   /* decompressing blocks */
+      CHECK4,   /* four check bytes to go */
+      CHECK3,   /* three check bytes to go */
+      CHECK2,   /* two check bytes to go */
+      CHECK1,   /* one check byte to go */
+      DONE,     /* finished check, done */
+      BAD}      /* got an error--stay here */
+    mode;               /* current inflate mode */
+
+  /* mode dependent information */
+  union {
+    uInt method;        /* if FLAGS, method byte */
+    struct {
+      uLong was;                /* computed check value */
+      uLong need;               /* stream check value */
+    } check;            /* if CHECK, check values to compare */
+    uInt marker;        /* if BAD, inflateSync's marker bytes count */
+  } sub;        /* submode */
+
+  /* mode independent information */
+  int  nowrap;          /* flag for no wrapper */
+  uInt wbits;           /* log2(window size)  (8..15, defaults to 15) */
+  inflate_blocks_statef
+    *blocks;            /* current inflate_blocks state */
+
+};
+
+
+int inflateReset(z)
+z_stream *z;
+{
+  uLong c;
+
+  if (z == Z_NULL || z->state == Z_NULL)
+    return Z_STREAM_ERROR;
+  z->total_in = z->total_out = 0;
+  z->msg = Z_NULL;
+  z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
+  inflate_blocks_reset(z->state->blocks, z, &c);
+  Trace((stderr, "inflate: reset\n"));
+  return Z_OK;
+}
+
+
+int inflateEnd(z)
+z_stream *z;
+{
+  uLong c;
+
+  if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
+    return Z_STREAM_ERROR;
+  if (z->state->blocks != Z_NULL)
+    inflate_blocks_free(z->state->blocks, z, &c);
+  ZFREE(z, z->state, sizeof(struct internal_state));
+  z->state = Z_NULL;
+  Trace((stderr, "inflate: end\n"));
+  return Z_OK;
+}
+
+
+int inflateInit2(z, w)
+z_stream *z;
+int w;
+{
+  /* initialize state */
+  if (z == Z_NULL)
+    return Z_STREAM_ERROR;
+/*  if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */
+/*  if (z->zfree == Z_NULL) z->zfree = zcfree; */
+  if ((z->state = (struct internal_state FAR *)
+       ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
+    return Z_MEM_ERROR;
+  z->state->blocks = Z_NULL;
+
+  /* handle undocumented nowrap option (no zlib header or check) */
+  z->state->nowrap = 0;
+  if (w < 0)
+  {
+    w = - w;
+    z->state->nowrap = 1;
+  }
+
+  /* set window size */
+  if (w < 8 || w > 15)
+  {
+    inflateEnd(z);
+    return Z_STREAM_ERROR;
+  }
+  z->state->wbits = (uInt)w;
+
+  /* create inflate_blocks state */
+  if ((z->state->blocks =
+       inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w))
+      == Z_NULL)
+  {
+    inflateEnd(z);
+    return Z_MEM_ERROR;
+  }
+  Trace((stderr, "inflate: allocated\n"));
+
+  /* reset state */
+  inflateReset(z);
+  return Z_OK;
+}
+
+
+int inflateInit(z)
+z_stream *z;
+{
+  return inflateInit2(z, DEF_WBITS);
+}
+
+
+#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;}
+#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
+
+int inflate(z, f)
+z_stream *z;
+int f;
+{
+  int r;
+  uInt b;
+
+  if (z == Z_NULL || z->next_in == Z_NULL)
+    return Z_STREAM_ERROR;
+  r = Z_BUF_ERROR;
+  while (1) switch (z->state->mode)
+  {
+    case METHOD:
+      NEEDBYTE
+      if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED)
+      {
+        z->state->mode = BAD;
+        z->msg = "unknown compression method";
+        z->state->sub.marker = 5;       /* can't try inflateSync */
+        break;
+      }
+      if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
+      {
+        z->state->mode = BAD;
+        z->msg = "invalid window size";
+        z->state->sub.marker = 5;       /* can't try inflateSync */
+        break;
+      }
+      z->state->mode = FLAG;
+    case FLAG:
+      NEEDBYTE
+      if ((b = NEXTBYTE) & 0x20)
+      {
+        z->state->mode = BAD;
+        z->msg = "invalid reserved bit";
+        z->state->sub.marker = 5;       /* can't try inflateSync */
+        break;
+      }
+      if (((z->state->sub.method << 8) + b) % 31)
+      {
+        z->state->mode = BAD;
+        z->msg = "incorrect header check";
+        z->state->sub.marker = 5;       /* can't try inflateSync */
+        break;
+      }
+      Trace((stderr, "inflate: zlib header ok\n"));
+      z->state->mode = BLOCKS;
+    case BLOCKS:
+      r = inflate_blocks(z->state->blocks, z, r);
+      if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
+	  r = inflate_packet_flush(z->state->blocks);
+      if (r == Z_DATA_ERROR)
+      {
+        z->state->mode = BAD;
+        z->state->sub.marker = 0;       /* can try inflateSync */
+        break;
+      }
+      if (r != Z_STREAM_END)
+        return r;
+      r = Z_OK;
+      inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
+      if (z->state->nowrap)
+      {
+        z->state->mode = DONE;
+        break;
+      }
+      z->state->mode = CHECK4;
+    case CHECK4:
+      NEEDBYTE
+      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
+      z->state->mode = CHECK3;
+    case CHECK3:
+      NEEDBYTE
+      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
+      z->state->mode = CHECK2;
+    case CHECK2:
+      NEEDBYTE
+      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
+      z->state->mode = CHECK1;
+    case CHECK1:
+      NEEDBYTE
+      z->state->sub.check.need += (uLong)NEXTBYTE;
+
+      if (z->state->sub.check.was != z->state->sub.check.need)
+      {
+        z->state->mode = BAD;
+        z->msg = "incorrect data check";
+        z->state->sub.marker = 5;       /* can't try inflateSync */
+        break;
+      }
+      Trace((stderr, "inflate: zlib check ok\n"));
+      z->state->mode = DONE;
+    case DONE:
+      return Z_STREAM_END;
+    case BAD:
+      return Z_DATA_ERROR;
+    default:
+      return Z_STREAM_ERROR;
+  }
+
+ empty:
+  if (f != Z_PACKET_FLUSH)
+    return r;
+  z->state->mode = BAD;
+  z->state->sub.marker = 0;       /* can try inflateSync */
+  return Z_DATA_ERROR;
+}
+
+/*
+ * This subroutine adds the data at next_in/avail_in to the output history
+ * without performing any output.  The output buffer must be "caught up";
+ * i.e. no pending output (hence s->read equals s->write), and the state must
+ * be BLOCKS (i.e. we should be willing to see the start of a series of
+ * BLOCKS).  On exit, the output will also be caught up, and the checksum
+ * will have been updated if need be.
+ */
+
+int inflateIncomp(z)
+z_stream *z;
+{
+    if (z->state->mode != BLOCKS)
+	return Z_DATA_ERROR;
+    return inflate_addhistory(z->state->blocks, z);
+}
+
+
+int inflateSync(z)
+z_stream *z;
+{
+  uInt n;       /* number of bytes to look at */
+  Bytef *p;     /* pointer to bytes */
+  uInt m;       /* number of marker bytes found in a row */
+  uLong r, w;   /* temporaries to save total_in and total_out */
+
+  /* set up */
+  if (z == Z_NULL || z->state == Z_NULL)
+    return Z_STREAM_ERROR;
+  if (z->state->mode != BAD)
+  {
+    z->state->mode = BAD;
+    z->state->sub.marker = 0;
+  }
+  if ((n = z->avail_in) == 0)
+    return Z_BUF_ERROR;
+  p = z->next_in;
+  m = z->state->sub.marker;
+
+  /* search */
+  while (n && m < 4)
+  {
+    if (*p == (Byte)(m < 2 ? 0 : 0xff))
+      m++;
+    else if (*p)
+      m = 0;
+    else
+      m = 4 - m;
+    p++, n--;
+  }
+
+  /* restore */
+  z->total_in += p - z->next_in;
+  z->next_in = p;
+  z->avail_in = n;
+  z->state->sub.marker = m;
+
+  /* return no joy or set up to restart on a new block */
+  if (m != 4)
+    return Z_DATA_ERROR;
+  r = z->total_in;  w = z->total_out;
+  inflateReset(z);
+  z->total_in = r;  z->total_out = w;
+  z->state->mode = BLOCKS;
+  return Z_OK;
+}
+
+#undef NEEDBYTE
+#undef NEXTBYTE
+
+/*+++++*/
+/* infutil.h -- types and macros common to blocks and codes
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* inflate blocks semi-private state */
+struct inflate_blocks_state {
+
+  /* mode */
+  enum {
+      TYPE,     /* get type bits (3, including end bit) */
+      LENS,     /* get lengths for stored */
+      STORED,   /* processing stored block */
+      TABLE,    /* get table lengths */
+      BTREE,    /* get bit lengths tree for a dynamic block */
+      DTREE,    /* get length, distance trees for a dynamic block */
+      CODES,    /* processing fixed or dynamic block */
+      DRY,      /* output remaining window bytes */
+      DONEB,     /* finished last block, done */
+      BADB}      /* got a data error--stuck here */
+    mode;               /* current inflate_block mode */
+
+  /* mode dependent information */
+  union {
+    uInt left;          /* if STORED, bytes left to copy */
+    struct {
+      uInt table;               /* table lengths (14 bits) */
+      uInt index;               /* index into blens (or border) */
+      uIntf *blens;             /* bit lengths of codes */
+      uInt bb;                  /* bit length tree depth */
+      inflate_huft *tb;         /* bit length decoding tree */
+      int nblens;		/* # elements allocated at blens */
+    } trees;            /* if DTREE, decoding info for trees */
+    struct {
+      inflate_huft *tl, *td;    /* trees to free */
+      inflate_codes_statef
+         *codes;
+    } decode;           /* if CODES, current state */
+  } sub;                /* submode */
+  uInt last;            /* true if this block is the last block */
+
+  /* mode independent information */
+  uInt bitk;            /* bits in bit buffer */
+  uLong bitb;           /* bit buffer */
+  Bytef *window;        /* sliding window */
+  Bytef *end;           /* one byte after sliding window */
+  Bytef *read;          /* window read pointer */
+  Bytef *write;         /* window write pointer */
+  check_func checkfn;   /* check function */
+  uLong check;          /* check on output */
+
+};
+
+
+/* defines for inflate input/output */
+/*   update pointers and return */
+#define UPDBITS {s->bitb=b;s->bitk=k;}
+#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
+#define UPDOUT {s->write=q;}
+#define UPDATE {UPDBITS UPDIN UPDOUT}
+#define LEAVE {UPDATE return inflate_flush(s,z,r);}
+/*   get bytes and bits */
+#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
+#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
+#define NEXTBYTE (n--,*p++)
+#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
+#define DUMPBITS(j) {b>>=(j);k-=(j);}
+/*   output bytes */
+#define WAVAIL (q<s->read?s->read-q-1:s->end-q)
+#define LOADOUT {q=s->write;m=WAVAIL;}
+#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}}
+#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
+#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
+#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
+/*   load local pointers */
+#define LOAD {LOADIN LOADOUT}
+
+/*
+ * The IBM 150 firmware munges the data right after _etext[].  This
+ * protects it. -- Cort
+ */
+local uInt protect_mask[] = {0, 0, 0, 0, 0, 0, 0, 0, 0 ,0 ,0 ,0};
+/* And'ing with mask[n] masks the lower n bits */
+local uInt inflate_mask[] = {
+    0x0000,
+    0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
+    0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
+};
+
+/* copy as much as possible from the sliding window to the output area */
+local int inflate_flush OF((
+    inflate_blocks_statef *,
+    z_stream *,
+    int));
+
+/*+++++*/
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+local int inflate_fast OF((
+    uInt,
+    uInt,
+    inflate_huft *,
+    inflate_huft *,
+    inflate_blocks_statef *,
+    z_stream *));
+
+
+/*+++++*/
+/* infblock.c -- interpret and process block types to last block
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* Table for deflate from PKZIP's appnote.txt. */
+local uInt border[] = { /* Order of the bit length code lengths */
+        16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+/*
+   Notes beyond the 1.93a appnote.txt:
+
+   1. Distance pointers never point before the beginning of the output
+      stream.
+   2. Distance pointers can point back across blocks, up to 32k away.
+   3. There is an implied maximum of 7 bits for the bit length table and
+      15 bits for the actual data.
+   4. If only one code exists, then it is encoded using one bit.  (Zero
+      would be more efficient, but perhaps a little confusing.)  If two
+      codes exist, they are coded using one bit each (0 and 1).
+   5. There is no way of sending zero distance codes--a dummy must be
+      sent if there are none.  (History: a pre 2.0 version of PKZIP would
+      store blocks with no distance codes, but this was discovered to be
+      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
+      zero distance codes, which is sent as one code of zero bits in
+      length.
+   6. There are up to 286 literal/length codes.  Code 256 represents the
+      end-of-block.  Note however that the static length tree defines
+      288 codes just to fill out the Huffman codes.  Codes 286 and 287
+      cannot be used though, since there is no length base or extra bits
+      defined for them.  Similarily, there are up to 30 distance codes.
+      However, static trees define 32 codes (all 5 bits) to fill out the
+      Huffman codes, but the last two had better not show up in the data.
+   7. Unzip can check dynamic Huffman blocks for complete code sets.
+      The exception is that a single code would not be complete (see #4).
+   8. The five bits following the block type is really the number of
+      literal codes sent minus 257.
+   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
+      (1+6+6).  Therefore, to output three times the length, you output
+      three codes (1+1+1), whereas to output four times the same length,
+      you only need two codes (1+3).  Hmm.
+  10. In the tree reconstruction algorithm, Code = Code + Increment
+      only if BitLength(i) is not zero.  (Pretty obvious.)
+  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
+  12. Note: length code 284 can represent 227-258, but length code 285
+      really is 258.  The last length deserves its own, short code
+      since it gets used a lot in very redundant files.  The length
+      258 is special since 258 - 3 (the min match length) is 255.
+  13. The literal/length and distance code bit lengths are read as a
+      single stream of lengths.  It is possible (and advantageous) for
+      a repeat code (16, 17, or 18) to go across the boundary between
+      the two sets of lengths.
+ */
+
+
+local void inflate_blocks_reset(s, z, c)
+inflate_blocks_statef *s;
+z_stream *z;
+uLongf *c;
+{
+  if (s->checkfn != Z_NULL)
+    *c = s->check;
+  if (s->mode == BTREE || s->mode == DTREE)
+    ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
+  if (s->mode == CODES)
+  {
+    inflate_codes_free(s->sub.decode.codes, z);
+    inflate_trees_free(s->sub.decode.td, z);
+    inflate_trees_free(s->sub.decode.tl, z);
+  }
+  s->mode = TYPE;
+  s->bitk = 0;
+  s->bitb = 0;
+  s->read = s->write = s->window;
+  if (s->checkfn != Z_NULL)
+    s->check = (*s->checkfn)(0L, Z_NULL, 0);
+  Trace((stderr, "inflate:   blocks reset\n"));
+}
+
+
+local inflate_blocks_statef *inflate_blocks_new(z, c, w)
+z_stream *z;
+check_func c;
+uInt w;
+{
+  inflate_blocks_statef *s;
+
+  if ((s = (inflate_blocks_statef *)ZALLOC
+       (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
+    return s;
+  if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
+  {
+    ZFREE(z, s, sizeof(struct inflate_blocks_state));
+    return Z_NULL;
+  }
+  s->end = s->window + w;
+  s->checkfn = c;
+  s->mode = TYPE;
+  Trace((stderr, "inflate:   blocks allocated\n"));
+  inflate_blocks_reset(s, z, &s->check);
+  return s;
+}
+
+
+local int inflate_blocks(s, z, r)
+inflate_blocks_statef *s;
+z_stream *z;
+int r;
+{
+  uInt t;               /* temporary storage */
+  uLong b;              /* bit buffer */
+  uInt k;               /* bits in bit buffer */
+  Bytef *p;             /* input data pointer */
+  uInt n;               /* bytes available there */
+  Bytef *q;             /* output window write pointer */
+  uInt m;               /* bytes to end of window or read pointer */
+
+  /* copy input/output information to locals (UPDATE macro restores) */
+  LOAD
+
+  /* process input based on current state */
+  while (1) switch (s->mode)
+  {
+    case TYPE:
+      NEEDBITS(3)
+      t = (uInt)b & 7;
+      s->last = t & 1;
+      switch (t >> 1)
+      {
+        case 0:                         /* stored */
+          Trace((stderr, "inflate:     stored block%s\n",
+                 s->last ? " (last)" : ""));
+          DUMPBITS(3)
+          t = k & 7;                    /* go to byte boundary */
+          DUMPBITS(t)
+          s->mode = LENS;               /* get length of stored block */
+          break;
+        case 1:                         /* fixed */
+          Trace((stderr, "inflate:     fixed codes block%s\n",
+                 s->last ? " (last)" : ""));
+          {
+            uInt bl, bd;
+            inflate_huft *tl, *td;
+
+            inflate_trees_fixed(&bl, &bd, &tl, &td);
+            s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
+            if (s->sub.decode.codes == Z_NULL)
+            {
+              r = Z_MEM_ERROR;
+              LEAVE
+            }
+            s->sub.decode.tl = Z_NULL;  /* don't try to free these */
+            s->sub.decode.td = Z_NULL;
+          }
+          DUMPBITS(3)
+          s->mode = CODES;
+          break;
+        case 2:                         /* dynamic */
+          Trace((stderr, "inflate:     dynamic codes block%s\n",
+                 s->last ? " (last)" : ""));
+          DUMPBITS(3)
+          s->mode = TABLE;
+          break;
+        case 3:                         /* illegal */
+          DUMPBITS(3)
+          s->mode = BADB;
+          z->msg = "invalid block type";
+          r = Z_DATA_ERROR;
+          LEAVE
+      }
+      break;
+    case LENS:
+      NEEDBITS(32)
+      if (((~b) >> 16) != (b & 0xffff))
+      {
+        s->mode = BADB;
+        z->msg = "invalid stored block lengths";
+        r = Z_DATA_ERROR;
+        LEAVE
+      }
+      s->sub.left = (uInt)b & 0xffff;
+      b = k = 0;                      /* dump bits */
+      Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
+      s->mode = s->sub.left ? STORED : TYPE;
+      break;
+    case STORED:
+      if (n == 0)
+        LEAVE
+      NEEDOUT
+      t = s->sub.left;
+      if (t > n) t = n;
+      if (t > m) t = m;
+      zmemcpy(q, p, t);
+      p += t;  n -= t;
+      q += t;  m -= t;
+      if ((s->sub.left -= t) != 0)
+        break;
+      Tracev((stderr, "inflate:       stored end, %lu total out\n",
+              z->total_out + (q >= s->read ? q - s->read :
+              (s->end - s->read) + (q - s->window))));
+      s->mode = s->last ? DRY : TYPE;
+      break;
+    case TABLE:
+      NEEDBITS(14)
+      s->sub.trees.table = t = (uInt)b & 0x3fff;
+#ifndef PKZIP_BUG_WORKAROUND
+      if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
+      {
+        s->mode = BADB;
+        z->msg = "too many length or distance symbols";
+        r = Z_DATA_ERROR;
+        LEAVE
+      }
+#endif
+      t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
+      if (t < 19)
+        t = 19;
+      if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
+      {
+        r = Z_MEM_ERROR;
+        LEAVE
+      }
+      s->sub.trees.nblens = t;
+      DUMPBITS(14)
+      s->sub.trees.index = 0;
+      Tracev((stderr, "inflate:       table sizes ok\n"));
+      s->mode = BTREE;
+    case BTREE:
+      while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
+      {
+        NEEDBITS(3)
+        s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
+        DUMPBITS(3)
+      }
+      while (s->sub.trees.index < 19)
+        s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
+      s->sub.trees.bb = 7;
+      t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
+                             &s->sub.trees.tb, z);
+      if (t != Z_OK)
+      {
+        r = t;
+        if (r == Z_DATA_ERROR)
+          s->mode = BADB;
+        LEAVE
+      }
+      s->sub.trees.index = 0;
+      Tracev((stderr, "inflate:       bits tree ok\n"));
+      s->mode = DTREE;
+    case DTREE:
+      while (t = s->sub.trees.table,
+             s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
+      {
+        inflate_huft *h;
+        uInt i, j, c;
+
+        t = s->sub.trees.bb;
+        NEEDBITS(t)
+        h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
+        t = h->word.what.Bits;
+        c = h->more.Base;
+        if (c < 16)
+        {
+          DUMPBITS(t)
+          s->sub.trees.blens[s->sub.trees.index++] = c;
+        }
+        else /* c == 16..18 */
+        {
+          i = c == 18 ? 7 : c - 14;
+          j = c == 18 ? 11 : 3;
+          NEEDBITS(t + i)
+          DUMPBITS(t)
+          j += (uInt)b & inflate_mask[i];
+          DUMPBITS(i)
+          i = s->sub.trees.index;
+          t = s->sub.trees.table;
+          if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
+              (c == 16 && i < 1))
+          {
+            s->mode = BADB;
+            z->msg = "invalid bit length repeat";
+            r = Z_DATA_ERROR;
+            LEAVE
+          }
+          c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
+          do {
+            s->sub.trees.blens[i++] = c;
+          } while (--j);
+          s->sub.trees.index = i;
+        }
+      }
+      inflate_trees_free(s->sub.trees.tb, z);
+      s->sub.trees.tb = Z_NULL;
+      {
+        uInt bl, bd;
+        inflate_huft *tl, *td;
+        inflate_codes_statef *c;
+
+        bl = 9;         /* must be <= 9 for lookahead assumptions */
+        bd = 6;         /* must be <= 9 for lookahead assumptions */
+        t = s->sub.trees.table;
+        t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
+                                  s->sub.trees.blens, &bl, &bd, &tl, &td, z);
+        if (t != Z_OK)
+        {
+          if (t == (uInt)Z_DATA_ERROR)
+            s->mode = BADB;
+          r = t;
+          LEAVE
+        }
+        Tracev((stderr, "inflate:       trees ok\n"));
+        if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
+        {
+          inflate_trees_free(td, z);
+          inflate_trees_free(tl, z);
+          r = Z_MEM_ERROR;
+          LEAVE
+        }
+        ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
+        s->sub.decode.codes = c;
+        s->sub.decode.tl = tl;
+        s->sub.decode.td = td;
+      }
+      s->mode = CODES;
+    case CODES:
+      UPDATE
+      if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
+        return inflate_flush(s, z, r);
+      r = Z_OK;
+      inflate_codes_free(s->sub.decode.codes, z);
+      inflate_trees_free(s->sub.decode.td, z);
+      inflate_trees_free(s->sub.decode.tl, z);
+      LOAD
+      Tracev((stderr, "inflate:       codes end, %lu total out\n",
+              z->total_out + (q >= s->read ? q - s->read :
+              (s->end - s->read) + (q - s->window))));
+      if (!s->last)
+      {
+        s->mode = TYPE;
+        break;
+      }
+      if (k > 7)              /* return unused byte, if any */
+      {
+        Assert(k < 16, "inflate_codes grabbed too many bytes")
+        k -= 8;
+        n++;
+        p--;                    /* can always return one */
+      }
+      s->mode = DRY;
+    case DRY:
+      FLUSH
+      if (s->read != s->write)
+        LEAVE
+      s->mode = DONEB;
+    case DONEB:
+      r = Z_STREAM_END;
+      LEAVE
+    case BADB:
+      r = Z_DATA_ERROR;
+      LEAVE
+    default:
+      r = Z_STREAM_ERROR;
+      LEAVE
+  }
+}
+
+
+local int inflate_blocks_free(s, z, c)
+inflate_blocks_statef *s;
+z_stream *z;
+uLongf *c;
+{
+  inflate_blocks_reset(s, z, c);
+  ZFREE(z, s->window, s->end - s->window);
+  ZFREE(z, s, sizeof(struct inflate_blocks_state));
+  Trace((stderr, "inflate:   blocks freed\n"));
+  return Z_OK;
+}
+
+/*
+ * This subroutine adds the data at next_in/avail_in to the output history
+ * without performing any output.  The output buffer must be "caught up";
+ * i.e. no pending output (hence s->read equals s->write), and the state must
+ * be BLOCKS (i.e. we should be willing to see the start of a series of
+ * BLOCKS).  On exit, the output will also be caught up, and the checksum
+ * will have been updated if need be.
+ */
+local int inflate_addhistory(s, z)
+inflate_blocks_statef *s;
+z_stream *z;
+{
+    uLong b;              /* bit buffer */  /* NOT USED HERE */
+    uInt k;               /* bits in bit buffer */ /* NOT USED HERE */
+    uInt t;               /* temporary storage */
+    Bytef *p;             /* input data pointer */
+    uInt n;               /* bytes available there */
+    Bytef *q;             /* output window write pointer */
+    uInt m;               /* bytes to end of window or read pointer */
+
+    if (s->read != s->write)
+	return Z_STREAM_ERROR;
+    if (s->mode != TYPE)
+	return Z_DATA_ERROR;
+
+    /* we're ready to rock */
+    LOAD
+    /* while there is input ready, copy to output buffer, moving
+     * pointers as needed.
+     */
+    while (n) {
+	t = n;  /* how many to do */
+	/* is there room until end of buffer? */
+	if (t > m) t = m;
+	/* update check information */
+	if (s->checkfn != Z_NULL)
+	    s->check = (*s->checkfn)(s->check, q, t);
+	zmemcpy(q, p, t);
+	q += t;
+	p += t;
+	n -= t;
+	z->total_out += t;
+	s->read = q;    /* drag read pointer forward */
+/*      WRAP  */ 	/* expand WRAP macro by hand to handle s->read */
+	if (q == s->end) {
+	    s->read = q = s->window;
+	    m = WAVAIL;
+	}
+    }
+    UPDATE
+    return Z_OK;
+}
+
+
+/*
+ * At the end of a Deflate-compressed PPP packet, we expect to have seen
+ * a `stored' block type value but not the (zero) length bytes.
+ */
+local int inflate_packet_flush(s)
+    inflate_blocks_statef *s;
+{
+    if (s->mode != LENS)
+	return Z_DATA_ERROR;
+    s->mode = TYPE;
+    return Z_OK;
+}
+
+
+/*+++++*/
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* simplify the use of the inflate_huft type with some defines */
+#define base more.Base
+#define next more.Next
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+
+local int huft_build OF((
+    uIntf *,            /* code lengths in bits */
+    uInt,               /* number of codes */
+    uInt,               /* number of "simple" codes */
+    uIntf *,            /* list of base values for non-simple codes */
+    uIntf *,            /* list of extra bits for non-simple codes */
+    inflate_huft * FAR*,/* result: starting table */
+    uIntf *,            /* maximum lookup bits (returns actual) */
+    z_stream *));       /* for zalloc function */
+
+local voidpf falloc OF((
+    voidpf,             /* opaque pointer (not used) */
+    uInt,               /* number of items */
+    uInt));             /* size of item */
+
+local void ffree OF((
+    voidpf q,           /* opaque pointer (not used) */
+    voidpf p,           /* what to free (not used) */
+    uInt n));		/* number of bytes (not used) */
+
+/* Tables for deflate from PKZIP's appnote.txt. */
+local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */
+        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+        /* actually lengths - 2; also see note #13 above about 258 */
+local uInt cplext[] = { /* Extra bits for literal codes 257..285 */
+        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
+        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */
+local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */
+        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+        8193, 12289, 16385, 24577};
+local uInt cpdext[] = { /* Extra bits for distance codes */
+        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
+        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
+        12, 12, 13, 13};
+
+/*
+   Huffman code decoding is performed using a multi-level table lookup.
+   The fastest way to decode is to simply build a lookup table whose
+   size is determined by the longest code.  However, the time it takes
+   to build this table can also be a factor if the data being decoded
+   is not very long.  The most common codes are necessarily the
+   shortest codes, so those codes dominate the decoding time, and hence
+   the speed.  The idea is you can have a shorter table that decodes the
+   shorter, more probable codes, and then point to subsidiary tables for
+   the longer codes.  The time it costs to decode the longer codes is
+   then traded against the time it takes to make longer tables.
+
+   This results of this trade are in the variables lbits and dbits
+   below.  lbits is the number of bits the first level table for literal/
+   length codes can decode in one step, and dbits is the same thing for
+   the distance codes.  Subsequent tables are also less than or equal to
+   those sizes.  These values may be adjusted either when all of the
+   codes are shorter than that, in which case the longest code length in
+   bits is used, or when the shortest code is *longer* than the requested
+   table size, in which case the length of the shortest code in bits is
+   used.
+
+   There are two different values for the two tables, since they code a
+   different number of possibilities each.  The literal/length table
+   codes 286 possible values, or in a flat code, a little over eight
+   bits.  The distance table codes 30 possible values, or a little less
+   than five bits, flat.  The optimum values for speed end up being
+   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
+   The optimum values may differ though from machine to machine, and
+   possibly even between compilers.  Your mileage may vary.
+ */
+
+
+/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
+#define BMAX 15         /* maximum bit length of any code */
+#define N_MAX 288       /* maximum number of codes in any set */
+
+#ifdef DEBUG_ZLIB
+  uInt inflate_hufts;
+#endif
+
+local int huft_build(b, n, s, d, e, t, m, zs)
+uIntf *b;               /* code lengths in bits (all assumed <= BMAX) */
+uInt n;                 /* number of codes (assumed <= N_MAX) */
+uInt s;                 /* number of simple-valued codes (0..s-1) */
+uIntf *d;               /* list of base values for non-simple codes */
+uIntf *e;               /* list of extra bits for non-simple codes */
+inflate_huft * FAR *t;  /* result: starting table */
+uIntf *m;               /* maximum lookup bits, returns actual */
+z_stream *zs;           /* for zalloc function */
+/* Given a list of code lengths and a maximum table size, make a set of
+   tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
+   if the given code set is incomplete (the tables are still built in this
+   case), Z_DATA_ERROR if the input is invalid (all zero length codes or an
+   over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */
+{
+
+  uInt a;                       /* counter for codes of length k */
+  uInt c[BMAX+1];               /* bit length count table */
+  uInt f;                       /* i repeats in table every f entries */
+  int g;                        /* maximum code length */
+  int h;                        /* table level */
+  register uInt i;              /* counter, current code */
+  register uInt j;              /* counter */
+  register int k;               /* number of bits in current code */
+  int l;                        /* bits per table (returned in m) */
+  register uIntf *p;            /* pointer into c[], b[], or v[] */
+  inflate_huft *q;              /* points to current table */
+  struct inflate_huft_s r;      /* table entry for structure assignment */
+  inflate_huft *u[BMAX];        /* table stack */
+  uInt v[N_MAX];                /* values in order of bit length */
+  register int w;               /* bits before this table == (l * h) */
+  uInt x[BMAX+1];               /* bit offsets, then code stack */
+  uIntf *xp;                    /* pointer into x */
+  int y;                        /* number of dummy codes added */
+  uInt z;                       /* number of entries in current table */
+
+
+  /* Generate counts for each bit length */
+  p = c;
+#define C0 *p++ = 0;
+#define C2 C0 C0 C0 C0
+#define C4 C2 C2 C2 C2
+  C4                            /* clear c[]--assume BMAX+1 is 16 */
+  p = b;  i = n;
+  do {
+    c[*p++]++;                  /* assume all entries <= BMAX */
+  } while (--i);
+  if (c[0] == n)                /* null input--all zero length codes */
+  {
+    *t = (inflate_huft *)Z_NULL;
+    *m = 0;
+    return Z_OK;
+  }
+
+
+  /* Find minimum and maximum length, bound *m by those */
+  l = *m;
+  for (j = 1; j <= BMAX; j++)
+    if (c[j])
+      break;
+  k = j;                        /* minimum code length */
+  if ((uInt)l < j)
+    l = j;
+  for (i = BMAX; i; i--)
+    if (c[i])
+      break;
+  g = i;                        /* maximum code length */
+  if ((uInt)l > i)
+    l = i;
+  *m = l;
+
+
+  /* Adjust last length count to fill out codes, if needed */
+  for (y = 1 << j; j < i; j++, y <<= 1)
+    if ((y -= c[j]) < 0)
+      return Z_DATA_ERROR;
+  if ((y -= c[i]) < 0)
+    return Z_DATA_ERROR;
+  c[i] += y;
+
+
+  /* Generate starting offsets into the value table for each length */
+  x[1] = j = 0;
+  p = c + 1;  xp = x + 2;
+  while (--i) {                 /* note that i == g from above */
+    *xp++ = (j += *p++);
+  }
+
+
+  /* Make a table of values in order of bit lengths */
+  p = b;  i = 0;
+  do {
+    if ((j = *p++) != 0)
+      v[x[j]++] = i;
+  } while (++i < n);
+
+
+  /* Generate the Huffman codes and for each, make the table entries */
+  x[0] = i = 0;                 /* first Huffman code is zero */
+  p = v;                        /* grab values in bit order */
+  h = -1;                       /* no tables yet--level -1 */
+  w = -l;                       /* bits decoded == (l * h) */
+  u[0] = (inflate_huft *)Z_NULL;        /* just to keep compilers happy */
+  q = (inflate_huft *)Z_NULL;   /* ditto */
+  z = 0;                        /* ditto */
+
+  /* go through the bit lengths (k already is bits in shortest code) */
+  for (; k <= g; k++)
+  {
+    a = c[k];
+    while (a--)
+    {
+      /* here i is the Huffman code of length k bits for value *p */
+      /* make tables up to required level */
+      while (k > w + l)
+      {
+        h++;
+        w += l;                 /* previous table always l bits */
+
+        /* compute minimum size table less than or equal to l bits */
+        z = (z = g - w) > (uInt)l ? l : z;      /* table size upper limit */
+        if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
+        {                       /* too few codes for k-w bit table */
+          f -= a + 1;           /* deduct codes from patterns left */
+          xp = c + k;
+          if (j < z)
+            while (++j < z)     /* try smaller tables up to z bits */
+            {
+              if ((f <<= 1) <= *++xp)
+                break;          /* enough codes to use up j bits */
+              f -= *xp;         /* else deduct codes from patterns */
+            }
+        }
+        z = 1 << j;             /* table entries for j-bit table */
+
+        /* allocate and link in new table */
+        if ((q = (inflate_huft *)ZALLOC
+             (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
+        {
+          if (h)
+            inflate_trees_free(u[0], zs);
+          return Z_MEM_ERROR;   /* not enough memory */
+        }
+	q->word.Nalloc = z + 1;
+#ifdef DEBUG_ZLIB
+        inflate_hufts += z + 1;
+#endif
+        *t = q + 1;             /* link to list for huft_free() */
+        *(t = &(q->next)) = Z_NULL;
+        u[h] = ++q;             /* table starts after link */
+
+        /* connect to last table, if there is one */
+        if (h)
+        {
+          x[h] = i;             /* save pattern for backing up */
+          r.bits = (Byte)l;     /* bits to dump before this table */
+          r.exop = (Byte)j;     /* bits in this table */
+          r.next = q;           /* pointer to this table */
+          j = i >> (w - l);     /* (get around Turbo C bug) */
+          u[h-1][j] = r;        /* connect to last table */
+        }
+      }
+
+      /* set up table entry in r */
+      r.bits = (Byte)(k - w);
+      if (p >= v + n)
+        r.exop = 128 + 64;      /* out of values--invalid code */
+      else if (*p < s)
+      {
+        r.exop = (Byte)(*p < 256 ? 0 : 32 + 64);     /* 256 is end-of-block */
+        r.base = *p++;          /* simple code is just the value */
+      }
+      else
+      {
+        r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */
+        r.base = d[*p++ - s];
+      }
+
+      /* fill code-like entries with r */
+      f = 1 << (k - w);
+      for (j = i >> w; j < z; j += f)
+        q[j] = r;
+
+      /* backwards increment the k-bit code i */
+      for (j = 1 << (k - 1); i & j; j >>= 1)
+        i ^= j;
+      i ^= j;
+
+      /* backup over finished tables */
+      while ((i & ((1 << w) - 1)) != x[h])
+      {
+        h--;                    /* don't need to update q */
+        w -= l;
+      }
+    }
+  }
+
+
+  /* Return Z_BUF_ERROR if we were given an incomplete table */
+  return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
+}
+
+
+local int inflate_trees_bits(c, bb, tb, z)
+uIntf *c;               /* 19 code lengths */
+uIntf *bb;              /* bits tree desired/actual depth */
+inflate_huft * FAR *tb; /* bits tree result */
+z_stream *z;            /* for zfree function */
+{
+  int r;
+
+  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
+  if (r == Z_DATA_ERROR)
+    z->msg = "oversubscribed dynamic bit lengths tree";
+  else if (r == Z_BUF_ERROR)
+  {
+    inflate_trees_free(*tb, z);
+    z->msg = "incomplete dynamic bit lengths tree";
+    r = Z_DATA_ERROR;
+  }
+  return r;
+}
+
+
+local int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
+uInt nl;                /* number of literal/length codes */
+uInt nd;                /* number of distance codes */
+uIntf *c;               /* that many (total) code lengths */
+uIntf *bl;              /* literal desired/actual bit depth */
+uIntf *bd;              /* distance desired/actual bit depth */
+inflate_huft * FAR *tl; /* literal/length tree result */
+inflate_huft * FAR *td; /* distance tree result */
+z_stream *z;            /* for zfree function */
+{
+  int r;
+
+  /* build literal/length tree */
+  if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK)
+  {
+    if (r == Z_DATA_ERROR)
+      z->msg = "oversubscribed literal/length tree";
+    else if (r == Z_BUF_ERROR)
+    {
+      inflate_trees_free(*tl, z);
+      z->msg = "incomplete literal/length tree";
+      r = Z_DATA_ERROR;
+    }
+    return r;
+  }
+
+  /* build distance tree */
+  if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK)
+  {
+    if (r == Z_DATA_ERROR)
+      z->msg = "oversubscribed literal/length tree";
+    else if (r == Z_BUF_ERROR) {
+#ifdef PKZIP_BUG_WORKAROUND
+      r = Z_OK;
+    }
+#else
+      inflate_trees_free(*td, z);
+      z->msg = "incomplete literal/length tree";
+      r = Z_DATA_ERROR;
+    }
+    inflate_trees_free(*tl, z);
+    return r;
+#endif
+  }
+
+  /* done */
+  return Z_OK;
+}
+
+
+/* build fixed tables only once--keep them here */
+local int fixed_lock = 0;
+local int fixed_built = 0;
+#define FIXEDH 530      /* number of hufts used by fixed tables */
+local uInt fixed_left = FIXEDH;
+local inflate_huft fixed_mem[FIXEDH];
+local uInt fixed_bl;
+local uInt fixed_bd;
+local inflate_huft *fixed_tl;
+local inflate_huft *fixed_td;
+
+
+local voidpf falloc(q, n, s)
+voidpf q;        /* opaque pointer (not used) */
+uInt n;         /* number of items */
+uInt s;         /* size of item */
+{
+  Assert(s == sizeof(inflate_huft) && n <= fixed_left,
+         "inflate_trees falloc overflow");
+  if (q) s++; /* to make some compilers happy */
+  fixed_left -= n;
+  return (voidpf)(fixed_mem + fixed_left);
+}
+
+
+local void ffree(q, p, n)
+voidpf q;
+voidpf p;
+uInt n;
+{
+  Assert(0, "inflate_trees ffree called!");
+  if (q) q = p; /* to make some compilers happy */
+}
+
+
+local int inflate_trees_fixed(bl, bd, tl, td)
+uIntf *bl;               /* literal desired/actual bit depth */
+uIntf *bd;               /* distance desired/actual bit depth */
+inflate_huft * FAR *tl;  /* literal/length tree result */
+inflate_huft * FAR *td;  /* distance tree result */
+{
+  /* build fixed tables if not built already--lock out other instances */
+  while (++fixed_lock > 1)
+    fixed_lock--;
+  if (!fixed_built)
+  {
+    int k;              /* temporary variable */
+    unsigned c[288];    /* length list for huft_build */
+    z_stream z;         /* for falloc function */
+
+    /* set up fake z_stream for memory routines */
+    z.zalloc = falloc;
+    z.zfree = ffree;
+    z.opaque = Z_NULL;
+
+    /* literal table */
+    for (k = 0; k < 144; k++)
+      c[k] = 8;
+    for (; k < 256; k++)
+      c[k] = 9;
+    for (; k < 280; k++)
+      c[k] = 7;
+    for (; k < 288; k++)
+      c[k] = 8;
+    fixed_bl = 7;
+    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
+
+    /* distance table */
+    for (k = 0; k < 30; k++)
+      c[k] = 5;
+    fixed_bd = 5;
+    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
+
+    /* done */
+    fixed_built = 1;
+  }
+  fixed_lock--;
+  *bl = fixed_bl;
+  *bd = fixed_bd;
+  *tl = fixed_tl;
+  *td = fixed_td;
+  return Z_OK;
+}
+
+
+local int inflate_trees_free(t, z)
+inflate_huft *t;        /* table to free */
+z_stream *z;            /* for zfree function */
+/* Free the malloc'ed tables built by huft_build(), which makes a linked
+   list of the tables it made, with the links in a dummy first entry of
+   each table. */
+{
+  register inflate_huft *p, *q;
+
+  /* Go through linked list, freeing from the malloced (t[-1]) address. */
+  p = t;
+  while (p != Z_NULL)
+  {
+    q = (--p)->next;
+    ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft));
+    p = q;
+  }
+  return Z_OK;
+}
+
+/*+++++*/
+/* infcodes.c -- process literals and length/distance pairs
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* simplify the use of the inflate_huft type with some defines */
+#define base more.Base
+#define next more.Next
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* inflate codes private state */
+struct inflate_codes_state {
+
+  /* mode */
+  enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
+      START,    /* x: set up for LEN */
+      LEN,      /* i: get length/literal/eob next */
+      LENEXT,   /* i: getting length extra (have base) */
+      DIST,     /* i: get distance next */
+      DISTEXT,  /* i: getting distance extra */
+      COPY,     /* o: copying bytes in window, waiting for space */
+      LIT,      /* o: got literal, waiting for output space */
+      WASH,     /* o: got eob, possibly still output waiting */
+      END,      /* x: got eob and all data flushed */
+      BADCODE}  /* x: got error */
+    mode;               /* current inflate_codes mode */
+
+  /* mode dependent information */
+  uInt len;
+  union {
+    struct {
+      inflate_huft *tree;       /* pointer into tree */
+      uInt need;                /* bits needed */
+    } code;             /* if LEN or DIST, where in tree */
+    uInt lit;           /* if LIT, literal */
+    struct {
+      uInt get;                 /* bits to get for extra */
+      uInt dist;                /* distance back to copy from */
+    } copy;             /* if EXT or COPY, where and how much */
+  } sub;                /* submode */
+
+  /* mode independent information */
+  Byte lbits;           /* ltree bits decoded per branch */
+  Byte dbits;           /* dtree bits decoder per branch */
+  inflate_huft *ltree;          /* literal/length/eob tree */
+  inflate_huft *dtree;          /* distance tree */
+
+};
+
+
+local inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
+uInt bl, bd;
+inflate_huft *tl, *td;
+z_stream *z;
+{
+  inflate_codes_statef *c;
+
+  if ((c = (inflate_codes_statef *)
+       ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
+  {
+    c->mode = START;
+    c->lbits = (Byte)bl;
+    c->dbits = (Byte)bd;
+    c->ltree = tl;
+    c->dtree = td;
+    Tracev((stderr, "inflate:       codes new\n"));
+  }
+  return c;
+}
+
+
+local int inflate_codes(s, z, r)
+inflate_blocks_statef *s;
+z_stream *z;
+int r;
+{
+  uInt j;               /* temporary storage */
+  inflate_huft *t;      /* temporary pointer */
+  uInt e;               /* extra bits or operation */
+  uLong b;              /* bit buffer */
+  uInt k;               /* bits in bit buffer */
+  Bytef *p;             /* input data pointer */
+  uInt n;               /* bytes available there */
+  Bytef *q;             /* output window write pointer */
+  uInt m;               /* bytes to end of window or read pointer */
+  Bytef *f;             /* pointer to copy strings from */
+  inflate_codes_statef *c = s->sub.decode.codes;  /* codes state */
+
+  /* copy input/output information to locals (UPDATE macro restores) */
+  LOAD
+
+  /* process input and output based on current state */
+  while (1) switch (c->mode)
+  {             /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
+    case START:         /* x: set up for LEN */
+#ifndef SLOW
+      if (m >= 258 && n >= 10)
+      {
+        UPDATE
+        r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
+        LOAD
+        if (r != Z_OK)
+        {
+          c->mode = r == Z_STREAM_END ? WASH : BADCODE;
+          break;
+        }
+      }
+#endif /* !SLOW */
+      c->sub.code.need = c->lbits;
+      c->sub.code.tree = c->ltree;
+      c->mode = LEN;
+    case LEN:           /* i: get length/literal/eob next */
+      j = c->sub.code.need;
+      NEEDBITS(j)
+      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
+      DUMPBITS(t->bits)
+      e = (uInt)(t->exop);
+      if (e == 0)               /* literal */
+      {
+        c->sub.lit = t->base;
+        Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+                 "inflate:         literal '%c'\n" :
+                 "inflate:         literal 0x%02x\n", t->base));
+        c->mode = LIT;
+        break;
+      }
+      if (e & 16)               /* length */
+      {
+        c->sub.copy.get = e & 15;
+        c->len = t->base;
+        c->mode = LENEXT;
+        break;
+      }
+      if ((e & 64) == 0)        /* next table */
+      {
+        c->sub.code.need = e;
+        c->sub.code.tree = t->next;
+        break;
+      }
+      if (e & 32)               /* end of block */
+      {
+        Tracevv((stderr, "inflate:         end of block\n"));
+        c->mode = WASH;
+        break;
+      }
+      c->mode = BADCODE;        /* invalid code */
+      z->msg = "invalid literal/length code";
+      r = Z_DATA_ERROR;
+      LEAVE
+    case LENEXT:        /* i: getting length extra (have base) */
+      j = c->sub.copy.get;
+      NEEDBITS(j)
+      c->len += (uInt)b & inflate_mask[j];
+      DUMPBITS(j)
+      c->sub.code.need = c->dbits;
+      c->sub.code.tree = c->dtree;
+      Tracevv((stderr, "inflate:         length %u\n", c->len));
+      c->mode = DIST;
+    case DIST:          /* i: get distance next */
+      j = c->sub.code.need;
+      NEEDBITS(j)
+      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
+      DUMPBITS(t->bits)
+      e = (uInt)(t->exop);
+      if (e & 16)               /* distance */
+      {
+        c->sub.copy.get = e & 15;
+        c->sub.copy.dist = t->base;
+        c->mode = DISTEXT;
+        break;
+      }
+      if ((e & 64) == 0)        /* next table */
+      {
+        c->sub.code.need = e;
+        c->sub.code.tree = t->next;
+        break;
+      }
+      c->mode = BADCODE;        /* invalid code */
+      z->msg = "invalid distance code";
+      r = Z_DATA_ERROR;
+      LEAVE
+    case DISTEXT:       /* i: getting distance extra */
+      j = c->sub.copy.get;
+      NEEDBITS(j)
+      c->sub.copy.dist += (uInt)b & inflate_mask[j];
+      DUMPBITS(j)
+      Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
+      c->mode = COPY;
+    case COPY:          /* o: copying bytes in window, waiting for space */
+#ifndef __TURBOC__ /* Turbo C bug for following expression */
+      f = (uInt)(q - s->window) < c->sub.copy.dist ?
+          s->end - (c->sub.copy.dist - (q - s->window)) :
+          q - c->sub.copy.dist;
+#else
+      f = q - c->sub.copy.dist;
+      if ((uInt)(q - s->window) < c->sub.copy.dist)
+        f = s->end - (c->sub.copy.dist - (q - s->window));
+#endif
+      while (c->len)
+      {
+        NEEDOUT
+        OUTBYTE(*f++)
+        if (f == s->end)
+          f = s->window;
+        c->len--;
+      }
+      c->mode = START;
+      break;
+    case LIT:           /* o: got literal, waiting for output space */
+      NEEDOUT
+      OUTBYTE(c->sub.lit)
+      c->mode = START;
+      break;
+    case WASH:          /* o: got eob, possibly more output */
+      FLUSH
+      if (s->read != s->write)
+        LEAVE
+      c->mode = END;
+    case END:
+      r = Z_STREAM_END;
+      LEAVE
+    case BADCODE:       /* x: got error */
+      r = Z_DATA_ERROR;
+      LEAVE
+    default:
+      r = Z_STREAM_ERROR;
+      LEAVE
+  }
+}
+
+
+local void inflate_codes_free(c, z)
+inflate_codes_statef *c;
+z_stream *z;
+{
+  ZFREE(z, c, sizeof(struct inflate_codes_state));
+  Tracev((stderr, "inflate:       codes free\n"));
+}
+
+/*+++++*/
+/* inflate_util.c -- data and routines common to blocks and codes
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* copy as much as possible from the sliding window to the output area */
+local int inflate_flush(s, z, r)
+inflate_blocks_statef *s;
+z_stream *z;
+int r;
+{
+  uInt n;
+  Bytef *p, *q;
+
+  /* local copies of source and destination pointers */
+  p = z->next_out;
+  q = s->read;
+
+  /* compute number of bytes to copy as far as end of window */
+  n = (uInt)((q <= s->write ? s->write : s->end) - q);
+  if (n > z->avail_out) n = z->avail_out;
+  if (n && r == Z_BUF_ERROR) r = Z_OK;
+
+  /* update counters */
+  z->avail_out -= n;
+  z->total_out += n;
+
+  /* update check information */
+  if (s->checkfn != Z_NULL)
+    s->check = (*s->checkfn)(s->check, q, n);
+
+  /* copy as far as end of window */
+  zmemcpy(p, q, n);
+  p += n;
+  q += n;
+
+  /* see if more to copy at beginning of window */
+  if (q == s->end)
+  {
+    /* wrap pointers */
+    q = s->window;
+    if (s->write == s->end)
+      s->write = s->window;
+
+    /* compute bytes to copy */
+    n = (uInt)(s->write - q);
+    if (n > z->avail_out) n = z->avail_out;
+    if (n && r == Z_BUF_ERROR) r = Z_OK;
+
+    /* update counters */
+    z->avail_out -= n;
+    z->total_out += n;
+
+    /* update check information */
+    if (s->checkfn != Z_NULL)
+      s->check = (*s->checkfn)(s->check, q, n);
+
+    /* copy */
+    zmemcpy(p, q, n);
+    p += n;
+    q += n;
+  }
+
+  /* update pointers */
+  z->next_out = p;
+  s->read = q;
+
+  /* done */
+  return r;
+}
+
+
+/*+++++*/
+/* inffast.c -- process literals and length/distance pairs fast
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* simplify the use of the inflate_huft type with some defines */
+#define base more.Base
+#define next more.Next
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* macros for bit input with no checking and for returning unused bytes */
+#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
+#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
+
+/* Called with number of bytes left to write in window at least 258
+   (the maximum string length) and number of input bytes available
+   at least ten.  The ten bytes are six bytes for the longest length/
+   distance pair plus four bytes for overloading the bit buffer. */
+
+local int inflate_fast(bl, bd, tl, td, s, z)
+uInt bl, bd;
+inflate_huft *tl, *td;
+inflate_blocks_statef *s;
+z_stream *z;
+{
+  inflate_huft *t;      /* temporary pointer */
+  uInt e;               /* extra bits or operation */
+  uLong b;              /* bit buffer */
+  uInt k;               /* bits in bit buffer */
+  Bytef *p;             /* input data pointer */
+  uInt n;               /* bytes available there */
+  Bytef *q;             /* output window write pointer */
+  uInt m;               /* bytes to end of window or read pointer */
+  uInt ml;              /* mask for literal/length tree */
+  uInt md;              /* mask for distance tree */
+  uInt c;               /* bytes to copy */
+  uInt d;               /* distance back to copy from */
+  Bytef *r;             /* copy source pointer */
+
+  /* load input, output, bit values */
+  LOAD
+
+  /* initialize masks */
+  ml = inflate_mask[bl];
+  md = inflate_mask[bd];
+
+  /* do until not enough input or output space for fast loop */
+  do {                          /* assume called with m >= 258 && n >= 10 */
+    /* get literal/length code */
+    GRABBITS(20)                /* max bits for literal/length code */
+    if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
+    {
+      DUMPBITS(t->bits)
+      Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+                "inflate:         * literal '%c'\n" :
+                "inflate:         * literal 0x%02x\n", t->base));
+      *q++ = (Byte)t->base;
+      m--;
+      continue;
+    }
+    do {
+      DUMPBITS(t->bits)
+      if (e & 16)
+      {
+        /* get extra bits for length */
+        e &= 15;
+        c = t->base + ((uInt)b & inflate_mask[e]);
+        DUMPBITS(e)
+        Tracevv((stderr, "inflate:         * length %u\n", c));
+
+        /* decode distance base of block to copy */
+        GRABBITS(15);           /* max bits for distance code */
+        e = (t = td + ((uInt)b & md))->exop;
+        do {
+          DUMPBITS(t->bits)
+          if (e & 16)
+          {
+            /* get extra bits to add to distance base */
+            e &= 15;
+            GRABBITS(e)         /* get extra bits (up to 13) */
+            d = t->base + ((uInt)b & inflate_mask[e]);
+            DUMPBITS(e)
+            Tracevv((stderr, "inflate:         * distance %u\n", d));
+
+            /* do the copy */
+            m -= c;
+            if ((uInt)(q - s->window) >= d)     /* offset before dest */
+            {                                   /*  just copy */
+              r = q - d;
+              *q++ = *r++;  c--;        /* minimum count is three, */
+              *q++ = *r++;  c--;        /*  so unroll loop a little */
+            }
+            else                        /* else offset after destination */
+            {
+              e = d - (q - s->window);  /* bytes from offset to end */
+              r = s->end - e;           /* pointer to offset */
+              if (c > e)                /* if source crosses, */
+              {
+                c -= e;                 /* copy to end of window */
+                do {
+                  *q++ = *r++;
+                } while (--e);
+                r = s->window;          /* copy rest from start of window */
+              }
+            }
+            do {                        /* copy all or what's left */
+              *q++ = *r++;
+            } while (--c);
+            break;
+          }
+          else if ((e & 64) == 0)
+            e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
+          else
+          {
+            z->msg = "invalid distance code";
+            UNGRAB
+            UPDATE
+            return Z_DATA_ERROR;
+          }
+        } while (1);
+        break;
+      }
+      if ((e & 64) == 0)
+      {
+        if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
+        {
+          DUMPBITS(t->bits)
+          Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+                    "inflate:         * literal '%c'\n" :
+                    "inflate:         * literal 0x%02x\n", t->base));
+          *q++ = (Byte)t->base;
+          m--;
+          break;
+        }
+      }
+      else if (e & 32)
+      {
+        Tracevv((stderr, "inflate:         * end of block\n"));
+        UNGRAB
+        UPDATE
+        return Z_STREAM_END;
+      }
+      else
+      {
+        z->msg = "invalid literal/length code";
+        UNGRAB
+        UPDATE
+        return Z_DATA_ERROR;
+      }
+    } while (1);
+  } while (m >= 258 && n >= 10);
+
+  /* not enough input or output--restore pointers and return */
+  UNGRAB
+  UPDATE
+  return Z_OK;
+}
+
+
+/*+++++*/
+/* zutil.c -- target dependent utility functions for the compression library
+ * Copyright (C) 1995 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */
+
+char *zlib_version = ZLIB_VERSION;
+
+char *z_errmsg[] = {
+"stream end",          /* Z_STREAM_END    1 */
+"",                    /* Z_OK            0 */
+"file error",          /* Z_ERRNO        (-1) */
+"stream error",        /* Z_STREAM_ERROR (-2) */
+"data error",          /* Z_DATA_ERROR   (-3) */
+"insufficient memory", /* Z_MEM_ERROR    (-4) */
+"buffer error",        /* Z_BUF_ERROR    (-5) */
+""};
+
+
+/*+++++*/
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */
+
+#define BASE 65521L /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf)  {s1 += *buf++; s2 += s1;}
+#define DO2(buf)  DO1(buf); DO1(buf);
+#define DO4(buf)  DO2(buf); DO2(buf);
+#define DO8(buf)  DO4(buf); DO4(buf);
+#define DO16(buf) DO8(buf); DO8(buf);
+
+/* ========================================================================= */
+uLong adler32(adler, buf, len)
+    uLong adler;
+    Bytef *buf;
+    uInt len;
+{
+    unsigned long s1 = adler & 0xffff;
+    unsigned long s2 = (adler >> 16) & 0xffff;
+    int k;
+
+    if (buf == Z_NULL) return 1L;
+
+    while (len > 0) {
+        k = len < NMAX ? len : NMAX;
+        len -= k;
+        while (k >= 16) {
+            DO16(buf);
+            k -= 16;
+        }
+        if (k != 0) do {
+            DO1(buf);
+        } while (--k);
+        s1 %= BASE;
+        s2 %= BASE;
+    }
+    return (s2 << 16) | s1;
+}
diff --git a/arch/xtensa/boot/lib/zmem.c b/arch/xtensa/boot/lib/zmem.c
new file mode 100644
index 0000000..7848f12
--- /dev/null
+++ b/arch/xtensa/boot/lib/zmem.c
@@ -0,0 +1,87 @@
+#include "zlib.h"
+
+/* bits taken from ppc */
+
+extern void *avail_ram, *end_avail;
+
+void exit (void)
+{
+  for (;;);
+}
+
+void *zalloc(void *x, unsigned items, unsigned size)
+{
+        void *p = avail_ram;
+
+        size *= items;
+        size = (size + 7) & -8;
+        avail_ram += size;
+        if (avail_ram > end_avail) {
+                //puts("oops... out of memory\n");
+                //pause();
+                exit ();
+        }
+        return p;
+}
+
+void zfree(void *x, void *addr, unsigned nb)
+{
+}
+
+
+#define HEAD_CRC        2
+#define EXTRA_FIELD     4
+#define ORIG_NAME       8
+#define COMMENT         0x10
+#define RESERVED        0xe0
+
+#define DEFLATED        8
+
+void gunzip (void *dst, int dstlen, unsigned char *src, int *lenp)
+{
+	z_stream s;
+	int r, i, flags;
+
+        /* skip header */
+
+        i = 10;
+        flags = src[3];
+        if (src[2] != DEFLATED || (flags & RESERVED) != 0) {
+                //puts("bad gzipped data\n");
+                exit();
+        }
+        if ((flags & EXTRA_FIELD) != 0)
+                i = 12 + src[10] + (src[11] << 8);
+        if ((flags & ORIG_NAME) != 0)
+                while (src[i++] != 0)
+                        ;
+        if ((flags & COMMENT) != 0)
+                while (src[i++] != 0)
+                        ;
+        if ((flags & HEAD_CRC) != 0)
+                i += 2;
+        if (i >= *lenp) {
+                //puts("gunzip: ran out of data in header\n");
+                exit();
+        }
+
+        s.zalloc = zalloc;
+        s.zfree = zfree;
+        r = inflateInit2(&s, -MAX_WBITS);
+        if (r != Z_OK) {
+                //puts("inflateInit2 returned "); puthex(r); puts("\n");
+                exit();
+        }
+        s.next_in = src + i;
+        s.avail_in = *lenp - i;
+        s.next_out = dst;
+        s.avail_out = dstlen;
+        r = inflate(&s, Z_FINISH);
+        if (r != Z_OK && r != Z_STREAM_END) {
+                //puts("inflate returned "); puthex(r); puts("\n");
+                exit();
+        }
+        *lenp = s.next_out - (unsigned char *) dst;
+        inflateEnd(&s);
+}
+
diff --git a/arch/xtensa/boot/ramdisk/Makefile b/arch/xtensa/boot/ramdisk/Makefile
new file mode 100644
index 0000000..b12f763
--- /dev/null
+++ b/arch/xtensa/boot/ramdisk/Makefile
@@ -0,0 +1,23 @@
+#
+# Makefile for a ramdisk image
+#
+
+BIG_ENDIAN	:= $(shell echo -e "\#ifdef __XTENSA_EL__\nint little;\n\#else\nint big;\n\#endif" | $(CC) -E -|grep -c big)
+
+ifeq ($(BIG_ENDIAN),1)
+OBJCOPY_ARGS    := -O elf32-xtensa-be
+else
+OBJCOPY_ARGS    := -O elf32-xtensa-le
+endif
+
+obj-y = ramdisk.o
+
+RAMDISK_IMAGE = arch/$(ARCH)/boot/ramdisk/$(CONFIG_EMBEDDED_RAMDISK_IMAGE)
+
+arch/$(ARCH)/boot/ramdisk/ramdisk.o:
+	$(Q)echo -e "dummy:" | $(AS) -o $@;
+	$(Q)$(OBJCOPY) $(OBJCOPY_ARGS)					    \
+		--add-section .initrd=$(RAMDISK_IMAGE)			    \
+		--set-section-flags .initrd=contents,alloc,load,load,data   \
+		arch/$(ARCH)/boot/ramdisk/ramdisk.o $@
+