diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5ba0035..fdcd2d5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -478,6 +478,8 @@
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
@@ -485,6 +487,18 @@
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
+config ARCH_MMP
+	bool "Marvell PXA168"
+	depends on MMU
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168 processor line.
+
 config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
@@ -621,6 +635,8 @@
 source "arch/arm/mach-pxa/Kconfig"
 source "arch/arm/plat-pxa/Kconfig"
 
+source "arch/arm/mach-mmp/Kconfig"
+
 source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 897f283..95186ef 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -109,6 +109,7 @@
  textofs-$(CONFIG_SA1111)	   := 0x00208000
 endif
  machine-$(CONFIG_ARCH_PXA)	   := pxa
+ machine-$(CONFIG_ARCH_MMP)	   := mmp
     plat-$(CONFIG_PLAT_PXA)	   := pxa
  machine-$(CONFIG_ARCH_L7200)	   := l7200
  machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index d1b678d..d14b827 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -636,6 +636,18 @@
 		b	__armv4_mmu_cache_off
 		b	__armv4_mmu_cache_flush
 
+		.word	0x56158000		@ PXA168
+		.word	0xfffff000
+		b __armv4_mmu_cache_on
+		b __armv4_mmu_cache_off
+		b __armv5tej_mmu_cache_flush
+
+		.word	0x56056930
+		.word	0xff0ffff0		@ PXA935
+		b	__armv4_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv4_mmu_cache_flush
+
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
 		b	__armv4_mmu_cache_on
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 6cbd8fd..bfb0cb9 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -94,6 +94,14 @@
 # endif
 #endif
 
+#if defined(CONFIG_CPU_MOHAWK)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE mohawk
+# endif
+#endif
+
 #if defined(CONFIG_CPU_FEROCEON)
 # define MULTI_CACHE 1
 #endif
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index db80203..c625031 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -185,6 +185,14 @@
 #   define CPU_NAME cpu_xsc3
 #  endif
 # endif
+# ifdef CONFIG_CPU_MOHAWK
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_mohawk
+#  endif
+# endif
 # ifdef CONFIG_CPU_FEROCEON
 #  ifdef CPU_NAME
 #   undef  MULTI_CPU
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
new file mode 100644
index 0000000..b523267
--- /dev/null
+++ b/arch/arm/mach-mmp/Kconfig
@@ -0,0 +1,27 @@
+if ARCH_MMP
+
+menu "Marvell PXA168 Implmentations"
+
+config MACH_ASPENITE
+	bool "Marvell's PXA168 Aspenite Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Aspenite Development Board.
+
+config MACH_ZYLONITE2
+	bool "Marvell's PXA168 Zylonite2 Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Zylonite2 Development Board.
+
+endmenu
+
+config CPU_PXA168
+	bool
+	select CPU_MOHAWK
+	help
+	  Select code specific to PXA168
+
+endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
new file mode 100644
index 0000000..0ac7644
--- /dev/null
+++ b/arch/arm/mach-mmp/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for Marvell's PXA168 processors line
+#
+
+obj-y				+= common.o clock.o devices.o irq.o time.o
+
+# SoC support
+obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
+
+# board support
+obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
+obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot
new file mode 100644
index 0000000..574a4aa
--- /dev/null
+++ b/arch/arm/mach-mmp/Makefile.boot
@@ -0,0 +1 @@
+   zreladdr-y	:= 0x00008000
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
new file mode 100644
index 0000000..e8caf58
--- /dev/null
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -0,0 +1,42 @@
+/*
+ *  linux/arch/arm/mach-mmp/aspenite.c
+ *
+ *  Support for the Marvell PXA168-based Aspenite and Zylonite2
+ *  Development Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+
+#include "common.h"
+
+static void __init common_init(void)
+{
+}
+
+MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = common_init,
+MACHINE_END
+
+MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = common_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
new file mode 100644
index 0000000..2d9cc5a
--- /dev/null
+++ b/arch/arm/mach-mmp/clock.c
@@ -0,0 +1,83 @@
+/*
+ *  linux/arch/arm/mach-mmp/clock.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-apbc.h>
+#include "clock.h"
+
+static void apbc_clk_enable(struct clk *clk)
+{
+	uint32_t clk_rst;
+
+	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(clk->fnclksel);
+	__raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void apbc_clk_disable(struct clk *clk)
+{
+	__raw_writel(0, clk->clk_rst);
+}
+
+struct clkops apbc_clk_ops = {
+	.enable		= apbc_clk_enable,
+	.disable	= apbc_clk_disable,
+};
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (clk->enabled++ == 0)
+		clk->ops->enable(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	WARN_ON(clk->enabled == 0);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (--clk->enabled == 0)
+		clk->ops->disable(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long rate;
+
+	if (clk->ops->getrate)
+		rate = clk->ops->getrate(clk);
+	else
+		rate = clk->rate;
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
new file mode 100644
index 0000000..ed967e7
--- /dev/null
+++ b/arch/arm/mach-mmp/clock.h
@@ -0,0 +1,71 @@
+/*
+ *  linux/arch/arm/mach-mmp/clock.h
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <asm/clkdev.h>
+
+struct clkops {
+	void			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+	unsigned long		(*getrate)(struct clk *);
+};
+
+struct clk {
+	const struct clkops	*ops;
+
+	void __iomem	*clk_rst;	/* clock reset control register */
+	int		fnclksel;	/* functional clock select (APBC) */
+	uint32_t	enable_val;	/* value for clock enable (APMU) */
+	unsigned long	rate;
+	int		enabled;
+};
+
+extern struct clkops apbc_clk_ops;
+
+#define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
+struct clk clk_##_name = {					\
+		.clk_rst	= (void __iomem *)APBC_##_reg,	\
+		.fnclksel	= _fnclksel,			\
+		.rate		= _rate,			\
+		.ops		= &apbc_clk_ops,		\
+}
+
+#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops)	\
+struct clk clk_##_name = {					\
+		.clk_rst	= (void __iomem *)APBC_##_reg,	\
+		.fnclksel	= _fnclksel,			\
+		.rate		= _rate,			\
+		.ops		= _ops,				\
+}
+
+#define APMU_CLK(_name, _reg, _eval, _rate)			\
+struct clk clk_##_name = {					\
+		.clk_rst	= (void __iomem *)APMU_##_reg,	\
+		.enable_val	= _eval,			\
+		.rate		= _rate,			\
+		.ops		= &apmu_clk_ops,		\
+}
+
+#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops)		\
+struct clk clk_##_name = {					\
+		.clk_rst	= (void __iomem *)APMU_##_reg,	\
+		.enable_val	= _eval,			\
+		.rate		= _rate,			\
+		.ops		= _ops,				\
+}
+
+#define INIT_CLKREG(_clk, _devname, _conname)			\
+	{							\
+		.clk		= _clk,				\
+		.dev_id		= _devname,			\
+		.con_id		= _conname,			\
+	}
+
+extern struct clk clk_pxa168_gpio;
+extern struct clk clk_pxa168_timers;
+
+extern void clks_register(struct clk_lookup *, size_t);
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
new file mode 100644
index 0000000..e1e66c1
--- /dev/null
+++ b/arch/arm/mach-mmp/common.c
@@ -0,0 +1,37 @@
+/*
+ *  linux/arch/arm/mach-mmp/common.c
+ *
+ *  Code common to PXA168 processor lines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <mach/addr-map.h>
+
+#include "common.h"
+
+static struct map_desc standard_io_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(APB_PHYS_BASE),
+		.virtual	= APB_VIRT_BASE,
+		.length		= APB_PHYS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.pfn		= __phys_to_pfn(AXI_PHYS_BASE),
+		.virtual	= AXI_VIRT_BASE,
+		.length		= AXI_PHYS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init pxa_map_io(void)
+{
+	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
new file mode 100644
index 0000000..bf7a6a4
--- /dev/null
+++ b/arch/arm/mach-mmp/common.h
@@ -0,0 +1,11 @@
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+
+struct sys_timer;
+
+extern void timer_init(int irq);
+
+extern struct sys_timer pxa168_timer;
+extern void __init pxa168_init_irq(void);
+
+extern void __init icu_init_irq(void);
+extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
new file mode 100644
index 0000000..191d9de
--- /dev/null
+++ b/arch/arm/mach-mmp/devices.c
@@ -0,0 +1,69 @@
+/*
+ * linux/arch/arm/mach-mmp/devices.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <mach/devices.h>
+
+int __init pxa_register_device(struct pxa_device_desc *desc,
+				void *data, size_t size)
+{
+	struct platform_device *pdev;
+	struct resource res[2 + MAX_RESOURCE_DMA];
+	int i, ret = 0, nres = 0;
+
+	pdev = platform_device_alloc(desc->drv_name, desc->id);
+	if (pdev == NULL)
+		return -ENOMEM;
+
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+	memset(res, 0, sizeof(res));
+
+	if (desc->start != -1ul && desc->size > 0) {
+		res[nres].start	= desc->start;
+		res[nres].end	= desc->start + desc->size - 1;
+		res[nres].flags	= IORESOURCE_MEM;
+		nres++;
+	}
+
+	if (desc->irq != NO_IRQ) {
+		res[nres].start	= desc->irq;
+		res[nres].end	= desc->irq;
+		res[nres].flags	= IORESOURCE_IRQ;
+		nres++;
+	}
+
+	for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
+		if (desc->dma[i] == 0)
+			break;
+
+		res[nres].start	= desc->dma[i];
+		res[nres].end	= desc->dma[i];
+		res[nres].flags	= IORESOURCE_DMA;
+	}
+
+	ret = platform_device_add_resources(pdev, res, nres);
+	if (ret) {
+		platform_device_put(pdev);
+		return ret;
+	}
+
+	if (data && size) {
+		ret = platform_device_add_data(pdev, data, size);
+		if (ret) {
+			platform_device_put(pdev);
+			return ret;
+		}
+	}
+
+	return platform_device_add(pdev);
+}
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h
new file mode 100644
index 0000000..3254089
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/addr-map.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/addr-map.h
+ *
+ *   Common address map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/* APB - Application Subsystem Peripheral Bus
+ *
+ * NOTE: the DMA controller registers are actually on the AXI fabric #1
+ * slave port to AHB/APB bridge, due to its close relationship to those
+ * peripherals on APB, let's count it into the ABP mapping area.
+ */
+#define APB_PHYS_BASE		0xd4000000
+#define APB_VIRT_BASE		0xfe000000
+#define APB_PHYS_SIZE		0x00200000
+
+#define AXI_PHYS_BASE		0xd4200000
+#define AXI_VIRT_BASE		0xfe200000
+#define AXI_PHYS_SIZE		0x00200000
+
+/* Static Memory Controller - Chip Select 0 and 1 */
+#define SMC_CS0_PHYS_BASE	0x80000000
+#define SMC_CS0_PHYS_SIZE	0x10000000
+#define SMC_CS1_PHYS_BASE	0x90000000
+#define SMC_CS1_PHYS_SIZE	0x10000000
+
+#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-mmp/include/mach/clkdev.h b/arch/arm/mach-mmp/include/mach/clkdev.h
new file mode 100644
index 0000000..2fb354e
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
new file mode 100644
index 0000000..4ceed7a5
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_MACH_CPUTYPE_H
+#define __ASM_MACH_CPUTYPE_H
+
+#include <asm/cputype.h>
+
+/*
+ *  CPU   Stepping   OLD_ID       CPU_ID      CHIP_ID
+ *
+ * PXA168    A0    0x41159263   0x56158400   0x00A0A333
+ */
+
+#ifdef CONFIG_CPU_PXA168
+#  define __cpu_is_pxa168(id)	\
+	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; })
+#else
+#  define __cpu_is_pxa168(id)	(0)
+#endif
+
+#define cpu_is_pxa168()		({ __cpu_is_pxa168(read_cpuid_id()); })
+
+#endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
new file mode 100644
index 0000000..a850f87
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-mmp/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copied from arch/arm/mach-pxa/include/mach/debug.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/addr-map.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ MMU enabled?
+		ldreq	\rx, =APB_PHYS_BASE		@ physical
+		ldrne	\rx, =APB_VIRT_BASE		@ virtual
+		orr	\rx, \rx, #0x00017000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
new file mode 100644
index 0000000..bc03388
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -0,0 +1,27 @@
+#include <linux/types.h>
+
+#define MAX_RESOURCE_DMA	2
+
+/* structure for describing the on-chip devices */
+struct pxa_device_desc {
+	const char	*dev_name;
+	const char	*drv_name;
+	int		id;
+	int		irq;
+	unsigned long	start;
+	unsigned long	size;
+	int		dma[MAX_RESOURCE_DMA];
+};
+
+#define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
+struct pxa_device_desc pxa168_device_##_name __initdata = {		\
+	.dev_name	= "pxa168-" #_name,				\
+	.drv_name	= _drv,						\
+	.id		= _id,						\
+	.irq		= IRQ_PXA168_##_irq,				\
+	.start		= _start,					\
+	.size		= _size,					\
+	.dma		= { _dma },					\
+};
+
+extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
diff --git a/arch/arm/mach-mmp/include/mach/dma.h b/arch/arm/mach-mmp/include/mach/dma.h
new file mode 100644
index 0000000..1d69145
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/dma.h
@@ -0,0 +1,13 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/dma.h
+ */
+
+#ifndef __ASM_MACH_DMA_H
+#define __ASM_MACH_DMA_H
+
+#include <mach/addr-map.h>
+
+#define DMAC_REGS_VIRT	(APB_VIRT_BASE + 0x00000)
+
+#include <plat/dma.h>
+#endif /* __ASM_MACH_DMA_H */
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
new file mode 100644
index 0000000..6d3cd35
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/entry-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-icu.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =ICU_AP_IRQ_SEL_INT_NUM
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\tmp, [\base, #0]
+	and	\irqnr, \tmp, #0x3f
+	tst	\tmp, #(1 << 6)
+	.endm
diff --git a/arch/arm/mach-mmp/include/mach/hardware.h b/arch/arm/mach-mmp/include/mach/hardware.h
new file mode 100644
index 0000000..99264a5
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/hardware.h
@@ -0,0 +1,4 @@
+#ifndef __ASM_MACH_HARDWARE_H
+#define __ASM_MACH_HARDWARE_H
+
+#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-mmp/include/mach/io.h b/arch/arm/mach-mmp/include/mach/io.h
new file mode 100644
index 0000000..e7adf3d
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/io.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/io.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
new file mode 100644
index 0000000..91ecb3f
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+/*
+ * Interrupt numbers for PXA168
+ */
+#define IRQ_PXA168_NONE			(-1)
+#define IRQ_PXA168_SSP3			0
+#define IRQ_PXA168_SSP2			1
+#define IRQ_PXA168_SSP1			2
+#define IRQ_PXA168_SSP0			3
+#define IRQ_PXA168_PMIC_INT		4
+#define IRQ_PXA168_RTC_INT		5
+#define IRQ_PXA168_RTC_ALARM		6
+#define IRQ_PXA168_TWSI0		7
+#define IRQ_PXA168_GPU			8
+#define IRQ_PXA168_KEYPAD		9
+#define IRQ_PXA168_ONEWIRE		12
+#define IRQ_PXA168_TIMER1		13
+#define IRQ_PXA168_TIMER2		14
+#define IRQ_PXA168_TIMER3		15
+#define IRQ_PXA168_CMU			16
+#define IRQ_PXA168_SSP4			17
+#define IRQ_PXA168_MSP_WAKEUP		19
+#define IRQ_PXA168_CF_WAKEUP		20
+#define IRQ_PXA168_XD_WAKEUP		21
+#define IRQ_PXA168_MFU			22
+#define IRQ_PXA168_MSP			23
+#define IRQ_PXA168_CF			24
+#define IRQ_PXA168_XD			25
+#define IRQ_PXA168_DDR_INT		26
+#define IRQ_PXA168_UART1		27
+#define IRQ_PXA168_UART2		28
+#define IRQ_PXA168_WDT			35
+#define IRQ_PXA168_FRQ_CHANGE		38
+#define IRQ_PXA168_SDH1			39
+#define IRQ_PXA168_SDH2			40
+#define IRQ_PXA168_LCD			41
+#define IRQ_PXA168_CI			42
+#define IRQ_PXA168_USB1			44
+#define IRQ_PXA168_NAND			45
+#define IRQ_PXA168_HIFI_DMA		46
+#define IRQ_PXA168_DMA_INT0		47
+#define IRQ_PXA168_DMA_INT1		48
+#define IRQ_PXA168_GPIOX		49
+#define IRQ_PXA168_USB2			51
+#define IRQ_PXA168_AC97			57
+#define IRQ_PXA168_TWSI1		58
+#define IRQ_PXA168_PMU			60
+#define IRQ_PXA168_SM_INT		63
+
+#define IRQ_GPIO_START			64
+#define IRQ_GPIO_NUM			128
+#define IRQ_GPIO(x)			(IRQ_GPIO_START + (x))
+
+#define NR_IRQS		(IRQ_GPIO_START + IRQ_GPIO_NUM)
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h
new file mode 100644
index 0000000..bdb21d7
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_MEMORY_H
+#define __ASM_MACH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
new file mode 100644
index 0000000..ef0a8a2
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_PXA168_H
+#define __ASM_MACH_PXA168_H
+
+#include <mach/devices.h>
+
+extern struct pxa_device_desc pxa168_device_uart1;
+extern struct pxa_device_desc pxa168_device_uart2;
+
+static inline int pxa168_add_uart(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa168_device_uart1; break;
+	case 2: d = &pxa168_device_uart2; break;
+	}
+
+	if (d == NULL)
+		return -EINVAL;
+
+	return pxa_register_device(d, NULL, 0);
+}
+#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
new file mode 100644
index 0000000..e0ffae5
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -0,0 +1,53 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-apbc.h
+ *
+ *   Application Peripheral Bus Clock Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_APBC_H
+#define __ASM_MACH_REGS_APBC_H
+
+#include <mach/addr-map.h>
+
+#define APBC_VIRT_BASE	(APB_VIRT_BASE + 0x015000)
+#define APBC_REG(x)	(APBC_VIRT_BASE + (x))
+
+/*
+ * APB clock register offsets for PXA168
+ */
+#define APBC_PXA168_UART1	APBC_REG(0x000)
+#define APBC_PXA168_UART2	APBC_REG(0x004)
+#define APBC_PXA168_GPIO	APBC_REG(0x008)
+#define APBC_PXA168_PWM0	APBC_REG(0x00c)
+#define APBC_PXA168_PWM1	APBC_REG(0x010)
+#define APBC_PXA168_SSP1	APBC_REG(0x01c)
+#define APBC_PXA168_SSP2	APBC_REG(0x020)
+#define APBC_PXA168_RTC		APBC_REG(0x028)
+#define APBC_PXA168_TWSI0	APBC_REG(0x02c)
+#define APBC_PXA168_KPC		APBC_REG(0x030)
+#define APBC_PXA168_TIMERS	APBC_REG(0x034)
+#define APBC_PXA168_AIB		APBC_REG(0x03c)
+#define APBC_PXA168_SW_JTAG	APBC_REG(0x040)
+#define APBC_PXA168_ONEWIRE	APBC_REG(0x048)
+#define APBC_PXA168_SSP3	APBC_REG(0x04c)
+#define APBC_PXA168_ASFAR	APBC_REG(0x050)
+#define APBC_PXA168_ASSAR	APBC_REG(0x054)
+#define APBC_PXA168_SSP4	APBC_REG(0x058)
+#define APBC_PXA168_SSP5	APBC_REG(0x05c)
+#define APBC_PXA168_TWSI1	APBC_REG(0x06c)
+#define APBC_PXA168_UART3	APBC_REG(0x070)
+#define APBC_PXA168_AC97	APBC_REG(0x084)
+
+/* Common APB clock register bit definitions */
+#define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
+#define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
+#define APBC_RST	(1 << 2)  /* Reset Generation */
+
+/* Functional Clock Selection Mask */
+#define APBC_FNCLKSEL(x)	(((x) & 0xf) << 4)
+
+#endif /* __ASM_MACH_REGS_APBC_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
new file mode 100644
index 0000000..9190305
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-apmu.h
+ *
+ *   Application Subsystem Power Management Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_APMU_H
+#define __ASM_MACH_REGS_APMU_H
+
+#include <mach/addr-map.h>
+
+#define APMU_VIRT_BASE	(AXI_VIRT_BASE + 0x82800)
+#define APMU_REG(x)	(APMU_VIRT_BASE + (x))
+
+/* Clock Reset Control */
+#define APMU_IRE	APMU_REG(0x048)
+#define APMU_LCD	APMU_REG(0x04c)
+#define APMU_CCIC	APMU_REG(0x050)
+#define APMU_SDH0	APMU_REG(0x054)
+#define APMU_SDH1	APMU_REG(0x058)
+#define APMU_USB	APMU_REG(0x05c)
+#define APMU_NAND	APMU_REG(0x060)
+#define APMU_DMA	APMU_REG(0x064)
+#define APMU_GEU	APMU_REG(0x068)
+#define APMU_BUS	APMU_REG(0x06c)
+
+#define APMU_FNCLK_EN	(1 << 4)
+#define APMU_AXICLK_EN	(1 << 3)
+#define APMU_FNRST_DIS	(1 << 1)
+#define APMU_AXIRST_DIS	(1 << 0)
+
+#endif /* __ASM_MACH_REGS_APMU_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/include/mach/regs-icu.h
new file mode 100644
index 0000000..e5f0872
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-icu.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-icu.h
+ *
+ *   Interrupt Control Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ICU_H
+#define __ASM_MACH_ICU_H
+
+#include <mach/addr-map.h>
+
+#define ICU_VIRT_BASE	(AXI_VIRT_BASE + 0x82000)
+#define ICU_REG(x)	(ICU_VIRT_BASE + (x))
+
+#define ICU_INT_CONF(n)		ICU_REG((n) << 2)
+#define ICU_INT_CONF_AP_INT	(1 << 6)
+#define ICU_INT_CONF_CP_INT	(1 << 5)
+#define ICU_INT_CONF_IRQ	(1 << 4)
+#define ICU_INT_CONF_MASK	(0xf)
+
+#define ICU_AP_FIQ_SEL_INT_NUM	ICU_REG(0x108)	/* AP FIQ Selected Interrupt */
+#define ICU_AP_IRQ_SEL_INT_NUM	ICU_REG(0x10C)	/* AP IRQ Selected Interrupt */
+#define ICU_AP_GBL_IRQ_MSK	ICU_REG(0x114)	/* AP Global Interrupt Mask */
+#define ICU_INT_STATUS_0	ICU_REG(0x128)	/* Interrupt Stuats 0 */
+#define ICU_INT_STATUS_1	ICU_REG(0x12C)	/* Interrupt Status 1 */
+
+#endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-timers.h b/arch/arm/mach-mmp/include/mach/regs-timers.h
new file mode 100644
index 0000000..45589fe
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-timers.h
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-timers.h
+ *
+ *   Timers Module
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_TIMERS_H
+#define __ASM_MACH_REGS_TIMERS_H
+
+#include <mach/addr-map.h>
+
+#define TIMERS1_VIRT_BASE	(APB_VIRT_BASE + 0x14000)
+#define TIMERS2_VIRT_BASE	(APB_VIRT_BASE + 0x16000)
+
+#define TMR_CCR		(0x0000)
+#define TMR_TN_MM(n, m)	(0x0004 + ((n) << 3) + (((n) + (m)) << 2))
+#define TMR_CR(n)	(0x0028 + ((n) << 2))
+#define TMR_SR(n)	(0x0034 + ((n) << 2))
+#define TMR_IER(n)	(0x0040 + ((n) << 2))
+#define TMR_PLVR(n)	(0x004c + ((n) << 2))
+#define TMR_PLCR(n)	(0x0058 + ((n) << 2))
+#define TMR_WMER	(0x0064)
+#define TMR_WMR		(0x0068)
+#define TMR_WVR		(0x006c)
+#define TMR_WSR		(0x0070)
+#define TMR_ICR(n)	(0x0074 + ((n) << 2))
+#define TMR_WICR	(0x0080)
+#define TMR_CER		(0x0084)
+#define TMR_CMR		(0x0088)
+#define TMR_ILR(n)	(0x008c + ((n) << 2))
+#define TMR_WCR		(0x0098)
+#define TMR_WFAR	(0x009c)
+#define TMR_WSAR	(0x00A0)
+#define TMR_CVWR(n)	(0x00A4 + ((n) << 2))
+
+#define TMR_CCR_CS_0(x)	(((x) & 0x3) << 0)
+#define TMR_CCR_CS_1(x)	(((x) & 0x7) << 2)
+#define TMR_CCR_CS_2(x)	(((x) & 0x3) << 5)
+
+#endif /* __ASM_MACH_REGS_TIMERS_H */
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
new file mode 100644
index 0000000..001edfe
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_SYSTEM_H
+#define __ASM_MACH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h
new file mode 100644
index 0000000..6cebbd0
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define CLOCK_TICK_RATE		3250000
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
new file mode 100644
index 0000000..c93d5fa
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-mmp/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/addr-map.h>
+
+#define UART1_BASE	(APB_PHYS_BASE + 0x36000)
+#define UART2_BASE	(APB_PHYS_BASE + 0x17000)
+#define UART3_BASE	(APB_PHYS_BASE + 0x18000)
+
+static inline void putc(char c)
+{
+	volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+
+	/* UART enabled? */
+	if (!(UART[UART_IER] & UART_IER_UUE))
+		return;
+
+	while (!(UART[UART_LSR] & UART_LSR_THRE))
+		barrier();
+
+	UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/include/mach/vmalloc.h b/arch/arm/mach-mmp/include/mach/vmalloc.h
new file mode 100644
index 0000000..b60ccaf
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
new file mode 100644
index 0000000..52ff2f0
--- /dev/null
+++ b/arch/arm/mach-mmp/irq.c
@@ -0,0 +1,55 @@
+/*
+ *  linux/arch/arm/mach-mmp/irq.c
+ *
+ *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *
+ *  Author:	Bin Yang <bin.yang@marvell.com>
+ *  Created:	Sep 30, 2008
+ *  Copyright:	Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/regs-icu.h>
+
+#include "common.h"
+
+#define IRQ_ROUTE_TO_AP		(ICU_INT_CONF_AP_INT | ICU_INT_CONF_IRQ)
+
+#define PRIORITY_DEFAULT	0x1
+#define PRIORITY_NONE		0x0	/* means IRQ disabled */
+
+static void icu_mask_irq(unsigned int irq)
+{
+	__raw_writel(PRIORITY_NONE, ICU_INT_CONF(irq));
+}
+
+static void icu_unmask_irq(unsigned int irq)
+{
+	__raw_writel(IRQ_ROUTE_TO_AP | PRIORITY_DEFAULT, ICU_INT_CONF(irq));
+}
+
+static struct irq_chip icu_irq_chip = {
+	.name	= "icu_irq",
+	.ack	= icu_mask_irq,
+	.mask	= icu_mask_irq,
+	.unmask	= icu_unmask_irq,
+};
+
+void __init icu_init_irq(void)
+{
+	int irq;
+
+	for (irq = 0; irq < 64; irq++) {
+		icu_mask_irq(irq);
+		set_irq_chip(irq, &icu_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+}
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
new file mode 100644
index 0000000..1935c75
--- /dev/null
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -0,0 +1,77 @@
+/*
+ *  linux/arch/arm/mach-mmp/pxa168.c
+ *
+ *  Code specific to PXA168
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+
+#include <asm/mach/time.h>
+#include <mach/addr-map.h>
+#include <mach/cputype.h>
+#include <mach/regs-apbc.h>
+#include <mach/irqs.h>
+#include <mach/dma.h>
+#include <mach/devices.h>
+
+#include "common.h"
+#include "clock.h"
+
+void __init pxa168_init_irq(void)
+{
+	icu_init_irq();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
+static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+
+/* device and clock bindings */
+static struct clk_lookup pxa168_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+};
+
+static int __init pxa168_init(void)
+{
+	if (cpu_is_pxa168()) {
+		pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
+		clks_register(ARRAY_AND_SIZE(pxa168_clkregs));
+	}
+
+	return 0;
+}
+postcore_initcall(pxa168_init);
+
+/* system timer - clock enabled, 3.25MHz */
+#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+
+static void __init pxa168_timer_init(void)
+{
+	/* this is early, we have to initialize the CCU registers by
+	 * ourselves instead of using clk_* API. Clock rate is defined
+	 * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
+	 */
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS);
+
+	/* 3.25MHz, bus/functional clock enabled, release reset */
+	__raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS);
+
+	timer_init(IRQ_PXA168_TIMER1);
+}
+
+struct sys_timer pxa168_timer = {
+	.init	= pxa168_timer_init,
+};
+
+/* on-chip devices */
+PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
+PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
new file mode 100644
index 0000000..b03a6ed
--- /dev/null
+++ b/arch/arm/mach-mmp/time.c
@@ -0,0 +1,199 @@
+/*
+ * linux/arch/arm/mach-mmp/time.c
+ *
+ *   Support for clocksource and clockevents
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * All rights reserved.
+ *
+ *   2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
+ *   2008-10-08: Bin Yang <bin.yang@marvell.com>
+ *
+ * The timers module actually includes three timers, each timer with upto
+ * three match comparators. Timer #0 is used here in free-running mode as
+ * the clock source, and match comparator #1 used as clock event device.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
+
+#include <mach/addr-map.h>
+#include <mach/regs-timers.h>
+#include <mach/irqs.h>
+
+#include "clock.h"
+
+#define TIMERS_VIRT_BASE	TIMERS1_VIRT_BASE
+
+#define MAX_DELTA		(0xfffffffe)
+#define MIN_DELTA		(16)
+
+#define TCR2NS_SCALE_FACTOR	10
+
+static unsigned long tcr2ns_scale;
+
+static void __init set_tcr2ns_scale(unsigned long tcr_rate)
+{
+	unsigned long long v = 1000000000ULL << TCR2NS_SCALE_FACTOR;
+	do_div(v, tcr_rate);
+	tcr2ns_scale = v;
+	/*
+	 * We want an even value to automatically clear the top bit
+	 * returned by cnt32_to_63() without an additional run time
+	 * instruction. So if the LSB is 1 then round it up.
+	 */
+	if (tcr2ns_scale & 1)
+		tcr2ns_scale++;
+}
+
+/*
+ * FIXME: the timer needs some delay to stablize the counter capture
+ */
+static inline uint32_t timer_read(void)
+{
+	int delay = 100;
+
+	__raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0));
+
+	while (delay--)
+		cpu_relax();
+
+	return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
+}
+
+unsigned long long sched_clock(void)
+{
+	unsigned long long v = cnt32_to_63(timer_read());
+	return (v * tcr2ns_scale) >> TCR2NS_SCALE_FACTOR;
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *c = dev_id;
+
+	/* disable and clear pending interrupt status */
+	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+	__raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0));
+	c->event_handler(c);
+	return IRQ_HANDLED;
+}
+
+static int timer_set_next_event(unsigned long delta,
+				struct clock_event_device *dev)
+{
+	unsigned long flags, next;
+
+	local_irq_save(flags);
+
+	/* clear pending interrupt status and enable */
+	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
+
+	next = timer_read() + delta;
+	__raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+static void timer_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *dev)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		/* disable the matching interrupt */
+		__raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0));
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+	case CLOCK_EVT_MODE_PERIODIC:
+		break;
+	}
+	local_irq_restore(flags);
+}
+
+static struct clock_event_device ckevt = {
+	.name		= "clockevent",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.rating		= 200,
+	.set_next_event	= timer_set_next_event,
+	.set_mode	= timer_set_mode,
+};
+
+static cycle_t clksrc_read(void)
+{
+	return timer_read();
+}
+
+static struct clocksource cksrc = {
+	.name		= "clocksource",
+	.shift		= 20,
+	.rating		= 200,
+	.read		= clksrc_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init timer_config(void)
+{
+	uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
+	uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER);
+	uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR);
+
+	__raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+
+	ccr &= TMR_CCR_CS_0(0x3);
+	__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
+
+	/* free-running mode */
+	__raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR);
+
+	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */
+	__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0));  /* clear status */
+	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+
+	/* enable timer counter */
+	__raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER);
+}
+
+static struct irqaction timer_irq = {
+	.name		= "timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= timer_interrupt,
+	.dev_id		= &ckevt,
+};
+
+void __init timer_init(int irq)
+{
+	timer_config();
+
+	set_tcr2ns_scale(CLOCK_TICK_RATE);
+
+	ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
+	ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
+	ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt);
+	ckevt.cpumask = cpumask_of(0);
+
+	cksrc.mult = clocksource_hz2mult(CLOCK_TICK_RATE, cksrc.shift);
+
+	setup_irq(irq, &timer_irq);
+
+	clocksource_register(&cksrc);
+	clockevents_register_device(&ckevt);
+}
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index d490f37..64086f4 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -340,6 +340,17 @@
 	select CPU_TLB_V4WBI if MMU
 	select IO_36
 
+# Marvell PJ1 (Mohawk)
+config CPU_MOHAWK
+	bool
+	select CPU_32v5
+	select CPU_ABRT_EV5T
+	select CPU_PABRT_NOIFAR
+	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
+	select CPU_TLB_V4WBI if MMU
+	select CPU_COPY_V4WB if MMU
+
 # Feroceon
 config CPU_FEROCEON
 	bool
@@ -569,7 +580,7 @@
 
 config ARM_THUMB
 	bool "Support Thumb user binaries"
-	depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON
+	depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON
 	default y
 	help
 	  Say Y if you want to include kernel support for running user space
@@ -653,7 +664,7 @@
 
 config CPU_BPREDICT_DISABLE
 	bool "Disable branch prediction"
-	depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7
+	depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7
 	help
 	  Say Y here to disable branch prediction.  If unsure, say N.
 
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 480f78a..64149d9 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -70,6 +70,7 @@
 obj-$(CONFIG_CPU_SA1100)	+= proc-sa1100.o
 obj-$(CONFIG_CPU_XSCALE)	+= proc-xscale.o
 obj-$(CONFIG_CPU_XSC3)		+= proc-xsc3.o
+obj-$(CONFIG_CPU_MOHAWK)	+= proc-mohawk.o
 obj-$(CONFIG_CPU_FEROCEON)	+= proc-feroceon.o
 obj-$(CONFIG_CPU_V6)		+= proc-v6.o
 obj-$(CONFIG_CPU_V7)		+= proc-v7.o
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
new file mode 100644
index 0000000..540f507
--- /dev/null
+++ b/arch/arm/mm/proc-mohawk.S
@@ -0,0 +1,416 @@
+/*
+ *  linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
+ *
+ *  PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
+ *
+ *  Heavily based on proc-arm926.S and proc-xsc3.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be flushed.  If the
+ * area is larger than this, then we flush the whole cache.
+ */
+#define CACHE_DLIMIT	32768
+
+/*
+ * The cache line size of the L1 D cache.
+ */
+#define CACHE_DLINESIZE	32
+
+/*
+ * cpu_mohawk_proc_init()
+ */
+ENTRY(cpu_mohawk_proc_init)
+	mov	pc, lr
+
+/*
+ * cpu_mohawk_proc_fin()
+ */
+ENTRY(cpu_mohawk_proc_fin)
+	stmfd	sp!, {lr}
+	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	msr	cpsr_c, ip
+	bl	mohawk_flush_kern_cache_all
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1800			@ ...iz...........
+	bic	r0, r0, #0x0006			@ .............ca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
+
+/*
+ * cpu_mohawk_reset(loc)
+ *
+ * Perform a soft reset of the system.  Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ *
+ * (same as arm926)
+ */
+	.align	5
+ENTRY(cpu_mohawk_reset)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
+	bic	ip, ip, #0x0007			@ .............cam
+	bic	ip, ip, #0x1100			@ ...i...s........
+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
+	mov	pc, r0
+
+/*
+ * cpu_mohawk_do_idle()
+ *
+ * Called with IRQs disabled
+ */
+	.align	5
+ENTRY(cpu_mohawk_do_idle)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mcr	p15, 0, r0, c7, c0, 4		@ wait for interrupt
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_all()
+ *
+ *	Clean and invalidate all cache entries in a particular
+ *	address space.
+ */
+ENTRY(mohawk_flush_user_cache_all)
+	/* FALLTHROUGH */
+
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(mohawk_flush_kern_cache_all)
+	mov	r2, #VM_EXEC
+	mov	ip, #0
+__flush_whole_cache:
+	mcr	p15, 0, ip, c7, c14, 0		@ clean & invalidate all D cache
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcrne	p15, 0, ip, c7, c10, 0		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_range(start, end, flags)
+ *
+ *	Clean and invalidate a range of cache entries in the
+ *	specified address range.
+ *
+ *	- start	- start address (inclusive)
+ *	- end	- end address (exclusive)
+ *	- flags	- vm_flags describing address space
+ *
+ * (same as arm926)
+ */
+ENTRY(mohawk_flush_user_cache_range)
+	mov	ip, #0
+	sub	r3, r1, r0			@ calculate total size
+	cmp	r3, #CACHE_DLIMIT
+	bgt	__flush_whole_cache
+1:	tst	r2, #VM_EXEC
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(mohawk_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as arm926)
+ */
+ENTRY(mohawk_coherent_user_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	flush_kern_dcache_page(void *page)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- page aligned address
+ */
+ENTRY(mohawk_flush_kern_dcache_page)
+	add	r1, r0, #PAGE_SZ
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(mohawk_dma_inv_range)
+	tst	r0, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
+	tst	r1, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean the specified virtual address range.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(mohawk_dma_clean_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	Clean and invalidate the specified virtual address range.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(mohawk_dma_flush_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:
+	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+ENTRY(mohawk_cache_fns)
+	.long	mohawk_flush_kern_cache_all
+	.long	mohawk_flush_user_cache_all
+	.long	mohawk_flush_user_cache_range
+	.long	mohawk_coherent_kern_range
+	.long	mohawk_coherent_user_range
+	.long	mohawk_flush_kern_dcache_page
+	.long	mohawk_dma_inv_range
+	.long	mohawk_dma_clean_range
+	.long	mohawk_dma_flush_range
+
+ENTRY(cpu_mohawk_dcache_clean_area)
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	subs	r1, r1, #CACHE_DLINESIZE
+	bhi	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ * cpu_mohawk_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+	.align	5
+ENTRY(cpu_mohawk_switch_mm)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c14, 0		@ clean & invalidate all D cache
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	orr	r0, r0, #0x18			@ cache the page table in L2
+	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mov	pc, lr
+
+/*
+ * cpu_mohawk_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+	.align	5
+ENTRY(cpu_mohawk_set_pte_ext)
+	armv3_set_pte_ext
+	mov	r0, r0
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+	__INIT
+
+	.type	__mohawk_setup, #function
+__mohawk_setup:
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs
+	orr	r4, r4, #0x18			@ cache the page table in L2
+	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
+
+	mov	r0, #0				@ don't allow CP access
+	mcr	p15, 0, r0, c15, c1, 0		@ write CP access register
+
+	adr	r5, mohawk_crval
+	ldmia	r5, {r5, r6}
+	mrc	p15, 0, r0, c1, c0		@ get control register
+	bic	r0, r0, r5
+	orr	r0, r0, r6
+	mov	pc, lr
+
+	.size	__mohawk_setup, . - __mohawk_setup
+
+	/*
+	 *  R
+	 * .RVI ZFRS BLDP WCAM
+	 * .011 1001 ..00 0101
+	 *
+	 */
+	.type	mohawk_crval, #object
+mohawk_crval:
+	crval	clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
+
+	__INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+	.type	mohawk_processor_functions, #object
+mohawk_processor_functions:
+	.word	v5t_early_abort
+	.word	pabort_noifar
+	.word	cpu_mohawk_proc_init
+	.word	cpu_mohawk_proc_fin
+	.word	cpu_mohawk_reset
+	.word	cpu_mohawk_do_idle
+	.word	cpu_mohawk_dcache_clean_area
+	.word	cpu_mohawk_switch_mm
+	.word	cpu_mohawk_set_pte_ext
+	.size	mohawk_processor_functions, . - mohawk_processor_functions
+
+	.section ".rodata"
+
+	.type	cpu_arch_name, #object
+cpu_arch_name:
+	.asciz	"armv5te"
+	.size	cpu_arch_name, . - cpu_arch_name
+
+	.type	cpu_elf_name, #object
+cpu_elf_name:
+	.asciz	"v5"
+	.size	cpu_elf_name, . - cpu_elf_name
+
+	.type	cpu_mohawk_name, #object
+cpu_mohawk_name:
+	.asciz	"Marvell 88SV331x"
+	.size	cpu_mohawk_name, . - cpu_mohawk_name
+
+	.align
+
+	.section ".proc.info.init", #alloc, #execinstr
+
+	.type	__88sv331x_proc_info,#object
+__88sv331x_proc_info:
+	.long	0x56158000			@ Marvell 88SV331x (MOHAWK)
+	.long	0xfffff000
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__mohawk_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_mohawk_name
+	.long	mohawk_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	v4wb_user_fns
+	.long	mohawk_cache_fns
+	.size	__88sv331x_proc_info, . - __88sv331x_proc_info