diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt
index 0c78f4b..e77bebf 100644
--- a/Documentation/ide/ide.txt
+++ b/Documentation/ide/ide.txt
@@ -216,6 +216,8 @@
 
 * "noflush=[interface_number.device_number]" to disable flush requests
 
+* "nohpa=[interface_number.device_number]" to disable Host Protected Area
+
 * "noprobe=[interface_number.device_number]" to skip probing
 
 * "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7bcdebf..0bf8a88 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -887,11 +887,8 @@
 
 	ide-core.nodma=	[HW] (E)IDE subsystem
 			Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
-			.vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
-			.chs .ignore_cable are additional options
-			See Documentation/ide/ide.txt.
-
-	idebus=		[HW] (E)IDE subsystem - VLB/PCI bus speed
+			.vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr
+			.cdrom .chs .ignore_cable are additional options
 			See Documentation/ide/ide.txt.
 
 	ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
diff --git a/Documentation/lguest/Makefile b/Documentation/lguest/Makefile
index 1f4f9e8..28c8cdf 100644
--- a/Documentation/lguest/Makefile
+++ b/Documentation/lguest/Makefile
@@ -1,6 +1,5 @@
 # This creates the demonstration utility "lguest" which runs a Linux guest.
-CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE
-LDLIBS:=-lz
+CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE
 
 all: lguest
 
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index d36fcc0..9ebcd6e 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -16,6 +16,7 @@
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <sys/wait.h>
+#include <sys/eventfd.h>
 #include <fcntl.h>
 #include <stdbool.h>
 #include <errno.h>
@@ -59,7 +60,6 @@
 /*:*/
 
 #define PAGE_PRESENT 0x7 	/* Present, RW, Execute */
-#define NET_PEERNUM 1
 #define BRIDGE_PFX "bridge:"
 #ifndef SIOCBRADDIF
 #define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
@@ -76,19 +76,12 @@
 	do { if (verbose) printf(args); } while(0)
 /*:*/
 
-/* File descriptors for the Waker. */
-struct {
-	int pipe[2];
-	int lguest_fd;
-} waker_fds;
-
 /* The pointer to the start of guest memory. */
 static void *guest_base;
 /* The maximum guest physical address allowed, and maximum possible. */
 static unsigned long guest_limit, guest_max;
-/* The pipe for signal hander to write to. */
-static int timeoutpipe[2];
-static unsigned int timeout_usec = 500;
+/* The /dev/lguest file descriptor. */
+static int lguest_fd;
 
 /* a per-cpu variable indicating whose vcpu is currently running */
 static unsigned int __thread cpu_id;
@@ -96,11 +89,6 @@
 /* This is our list of devices. */
 struct device_list
 {
-	/* Summary information about the devices in our list: ready to pass to
-	 * select() to ask which need servicing.*/
-	fd_set infds;
-	int max_infd;
-
 	/* Counter to assign interrupt numbers. */
 	unsigned int next_irq;
 
@@ -126,22 +114,21 @@
 	/* The linked-list pointer. */
 	struct device *next;
 
-	/* The this device's descriptor, as mapped into the Guest. */
+	/* The device's descriptor, as mapped into the Guest. */
 	struct lguest_device_desc *desc;
 
+	/* We can't trust desc values once Guest has booted: we use these. */
+	unsigned int feature_len;
+	unsigned int num_vq;
+
 	/* The name of this device, for --verbose. */
 	const char *name;
 
-	/* If handle_input is set, it wants to be called when this file
-	 * descriptor is ready. */
-	int fd;
-	bool (*handle_input)(int fd, struct device *me);
-
 	/* Any queues attached to this device */
 	struct virtqueue *vq;
 
-	/* Handle status being finalized (ie. feature bits stable). */
-	void (*ready)(struct device *me);
+	/* Is it operational */
+	bool running;
 
 	/* Device-specific data. */
 	void *priv;
@@ -164,22 +151,28 @@
 	/* Last available index we saw. */
 	u16 last_avail_idx;
 
-	/* The routine to call when the Guest pings us, or timeout. */
-	void (*handle_output)(int fd, struct virtqueue *me, bool timeout);
+	/* How many are used since we sent last irq? */
+	unsigned int pending_used;
 
-	/* Outstanding buffers */
-	unsigned int inflight;
+	/* Eventfd where Guest notifications arrive. */
+	int eventfd;
 
-	/* Is this blocked awaiting a timer? */
-	bool blocked;
+	/* Function for the thread which is servicing this virtqueue. */
+	void (*service)(struct virtqueue *vq);
+	pid_t thread;
 };
 
 /* Remember the arguments to the program so we can "reboot" */
 static char **main_args;
 
-/* Since guest is UP and we don't run at the same time, we don't need barriers.
- * But I include them in the code in case others copy it. */
-#define wmb()
+/* The original tty settings to restore on exit. */
+static struct termios orig_term;
+
+/* We have to be careful with barriers: our devices are all run in separate
+ * threads and so we need to make sure that changes visible to the Guest happen
+ * in precise order. */
+#define wmb() __asm__ __volatile__("" : : : "memory")
+#define mb() __asm__ __volatile__("" : : : "memory")
 
 /* Convert an iovec element to the given type.
  *
@@ -245,7 +238,7 @@
 static u8 *get_feature_bits(struct device *dev)
 {
 	return (u8 *)(dev->desc + 1)
-		+ dev->desc->num_vq * sizeof(struct lguest_vqconfig);
+		+ dev->num_vq * sizeof(struct lguest_vqconfig);
 }
 
 /*L:100 The Launcher code itself takes us out into userspace, that scary place
@@ -505,99 +498,19 @@
  * saw the arguments it expects when we looked at initialize() in lguest_user.c:
  * the base of Guest "physical" memory, the top physical page to allow and the
  * entry point for the Guest. */
-static int tell_kernel(unsigned long start)
+static void tell_kernel(unsigned long start)
 {
 	unsigned long args[] = { LHREQ_INITIALIZE,
 				 (unsigned long)guest_base,
 				 guest_limit / getpagesize(), start };
-	int fd;
-
 	verbose("Guest: %p - %p (%#lx)\n",
 		guest_base, guest_base + guest_limit, guest_limit);
-	fd = open_or_die("/dev/lguest", O_RDWR);
-	if (write(fd, args, sizeof(args)) < 0)
+	lguest_fd = open_or_die("/dev/lguest", O_RDWR);
+	if (write(lguest_fd, args, sizeof(args)) < 0)
 		err(1, "Writing to /dev/lguest");
-
-	/* We return the /dev/lguest file descriptor to control this Guest */
-	return fd;
 }
 /*:*/
 
-static void add_device_fd(int fd)
-{
-	FD_SET(fd, &devices.infds);
-	if (fd > devices.max_infd)
-		devices.max_infd = fd;
-}
-
-/*L:200
- * The Waker.
- *
- * With console, block and network devices, we can have lots of input which we
- * need to process.  We could try to tell the kernel what file descriptors to
- * watch, but handing a file descriptor mask through to the kernel is fairly
- * icky.
- *
- * Instead, we clone off a thread which watches the file descriptors and writes
- * the LHREQ_BREAK command to the /dev/lguest file descriptor to tell the Host
- * stop running the Guest.  This causes the Launcher to return from the
- * /dev/lguest read with -EAGAIN, where it will write to /dev/lguest to reset
- * the LHREQ_BREAK and wake us up again.
- *
- * This, of course, is merely a different *kind* of icky.
- *
- * Given my well-known antipathy to threads, I'd prefer to use processes.  But
- * it's easier to share Guest memory with threads, and trivial to share the
- * devices.infds as the Launcher changes it.
- */
-static int waker(void *unused)
-{
-	/* Close the write end of the pipe: only the Launcher has it open. */
-	close(waker_fds.pipe[1]);
-
-	for (;;) {
-		fd_set rfds = devices.infds;
-		unsigned long args[] = { LHREQ_BREAK, 1 };
-		unsigned int maxfd = devices.max_infd;
-
-		/* We also listen to the pipe from the Launcher. */
-		FD_SET(waker_fds.pipe[0], &rfds);
-		if (waker_fds.pipe[0] > maxfd)
-			maxfd = waker_fds.pipe[0];
-
-		/* Wait until input is ready from one of the devices. */
-		select(maxfd+1, &rfds, NULL, NULL, NULL);
-
-		/* Message from Launcher? */
-		if (FD_ISSET(waker_fds.pipe[0], &rfds)) {
-			char c;
-			/* If this fails, then assume Launcher has exited.
-			 * Don't do anything on exit: we're just a thread! */
-			if (read(waker_fds.pipe[0], &c, 1) != 1)
-				_exit(0);
-			continue;
-		}
-
-		/* Send LHREQ_BREAK command to snap the Launcher out of it. */
-		pwrite(waker_fds.lguest_fd, args, sizeof(args), cpu_id);
-	}
-	return 0;
-}
-
-/* This routine just sets up a pipe to the Waker process. */
-static void setup_waker(int lguest_fd)
-{
-	/* This pipe is closed when Launcher dies, telling Waker. */
-	if (pipe(waker_fds.pipe) != 0)
-		err(1, "Creating pipe for Waker");
-
-	/* Waker also needs to know the lguest fd */
-	waker_fds.lguest_fd = lguest_fd;
-
-	if (clone(waker, malloc(4096) + 4096, CLONE_VM | SIGCHLD, NULL) == -1)
-		err(1, "Creating Waker");
-}
-
 /*
  * Device Handling.
  *
@@ -623,49 +536,90 @@
 /* Each buffer in the virtqueues is actually a chain of descriptors.  This
  * function returns the next descriptor in the chain, or vq->vring.num if we're
  * at the end. */
-static unsigned next_desc(struct virtqueue *vq, unsigned int i)
+static unsigned next_desc(struct vring_desc *desc,
+			  unsigned int i, unsigned int max)
 {
 	unsigned int next;
 
 	/* If this descriptor says it doesn't chain, we're done. */
-	if (!(vq->vring.desc[i].flags & VRING_DESC_F_NEXT))
-		return vq->vring.num;
+	if (!(desc[i].flags & VRING_DESC_F_NEXT))
+		return max;
 
 	/* Check they're not leading us off end of descriptors. */
-	next = vq->vring.desc[i].next;
+	next = desc[i].next;
 	/* Make sure compiler knows to grab that: we don't want it changing! */
 	wmb();
 
-	if (next >= vq->vring.num)
+	if (next >= max)
 		errx(1, "Desc next is %u", next);
 
 	return next;
 }
 
+/* This actually sends the interrupt for this virtqueue */
+static void trigger_irq(struct virtqueue *vq)
+{
+	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
+
+	/* Don't inform them if nothing used. */
+	if (!vq->pending_used)
+		return;
+	vq->pending_used = 0;
+
+	/* If they don't want an interrupt, don't send one, unless empty. */
+	if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+	    && lg_last_avail(vq) != vq->vring.avail->idx)
+		return;
+
+	/* Send the Guest an interrupt tell them we used something up. */
+	if (write(lguest_fd, buf, sizeof(buf)) != 0)
+		err(1, "Triggering irq %i", vq->config.irq);
+}
+
 /* This looks in the virtqueue and for the first available buffer, and converts
  * it to an iovec for convenient access.  Since descriptors consist of some
  * number of output then some number of input descriptors, it's actually two
  * iovecs, but we pack them into one and note how many of each there were.
  *
- * This function returns the descriptor number found, or vq->vring.num (which
- * is never a valid descriptor number) if none was found. */
-static unsigned get_vq_desc(struct virtqueue *vq,
-			    struct iovec iov[],
-			    unsigned int *out_num, unsigned int *in_num)
+ * This function returns the descriptor number found. */
+static unsigned wait_for_vq_desc(struct virtqueue *vq,
+				 struct iovec iov[],
+				 unsigned int *out_num, unsigned int *in_num)
 {
-	unsigned int i, head;
-	u16 last_avail;
+	unsigned int i, head, max;
+	struct vring_desc *desc;
+	u16 last_avail = lg_last_avail(vq);
+
+	while (last_avail == vq->vring.avail->idx) {
+		u64 event;
+
+		/* OK, tell Guest about progress up to now. */
+		trigger_irq(vq);
+
+		/* OK, now we need to know about added descriptors. */
+		vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
+
+		/* They could have slipped one in as we were doing that: make
+		 * sure it's written, then check again. */
+		mb();
+		if (last_avail != vq->vring.avail->idx) {
+			vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+			break;
+		}
+
+		/* Nothing new?  Wait for eventfd to tell us they refilled. */
+		if (read(vq->eventfd, &event, sizeof(event)) != sizeof(event))
+			errx(1, "Event read failed?");
+
+		/* We don't need to be notified again. */
+		vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+	}
 
 	/* Check it isn't doing very strange things with descriptor numbers. */
-	last_avail = lg_last_avail(vq);
 	if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num)
 		errx(1, "Guest moved used index from %u to %u",
 		     last_avail, vq->vring.avail->idx);
 
-	/* If there's nothing new since last we looked, return invalid. */
-	if (vq->vring.avail->idx == last_avail)
-		return vq->vring.num;
-
 	/* Grab the next descriptor number they're advertising, and increment
 	 * the index we've seen. */
 	head = vq->vring.avail->ring[last_avail % vq->vring.num];
@@ -678,15 +632,28 @@
 	/* When we start there are none of either input nor output. */
 	*out_num = *in_num = 0;
 
+	max = vq->vring.num;
+	desc = vq->vring.desc;
 	i = head;
+
+	/* If this is an indirect entry, then this buffer contains a descriptor
+	 * table which we handle as if it's any normal descriptor chain. */
+	if (desc[i].flags & VRING_DESC_F_INDIRECT) {
+		if (desc[i].len % sizeof(struct vring_desc))
+			errx(1, "Invalid size for indirect buffer table");
+
+		max = desc[i].len / sizeof(struct vring_desc);
+		desc = check_pointer(desc[i].addr, desc[i].len);
+		i = 0;
+	}
+
 	do {
 		/* Grab the first descriptor, and check it's OK. */
-		iov[*out_num + *in_num].iov_len = vq->vring.desc[i].len;
+		iov[*out_num + *in_num].iov_len = desc[i].len;
 		iov[*out_num + *in_num].iov_base
-			= check_pointer(vq->vring.desc[i].addr,
-					vq->vring.desc[i].len);
+			= check_pointer(desc[i].addr, desc[i].len);
 		/* If this is an input descriptor, increment that count. */
-		if (vq->vring.desc[i].flags & VRING_DESC_F_WRITE)
+		if (desc[i].flags & VRING_DESC_F_WRITE)
 			(*in_num)++;
 		else {
 			/* If it's an output descriptor, they're all supposed
@@ -697,11 +664,10 @@
 		}
 
 		/* If we've got too many, that implies a descriptor loop. */
-		if (*out_num + *in_num > vq->vring.num)
+		if (*out_num + *in_num > max)
 			errx(1, "Looped descriptor");
-	} while ((i = next_desc(vq, i)) != vq->vring.num);
+	} while ((i = next_desc(desc, i, max)) != max);
 
-	vq->inflight++;
 	return head;
 }
 
@@ -719,44 +685,20 @@
 	/* Make sure buffer is written before we update index. */
 	wmb();
 	vq->vring.used->idx++;
-	vq->inflight--;
-}
-
-/* This actually sends the interrupt for this virtqueue */
-static void trigger_irq(int fd, struct virtqueue *vq)
-{
-	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
-
-	/* If they don't want an interrupt, don't send one, unless empty. */
-	if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
-	    && vq->inflight)
-		return;
-
-	/* Send the Guest an interrupt tell them we used something up. */
-	if (write(fd, buf, sizeof(buf)) != 0)
-		err(1, "Triggering irq %i", vq->config.irq);
+	vq->pending_used++;
 }
 
 /* And here's the combo meal deal.  Supersize me! */
-static void add_used_and_trigger(int fd, struct virtqueue *vq,
-				 unsigned int head, int len)
+static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len)
 {
 	add_used(vq, head, len);
-	trigger_irq(fd, vq);
+	trigger_irq(vq);
 }
 
 /*
  * The Console
  *
- * Here is the input terminal setting we save, and the routine to restore them
- * on exit so the user gets their terminal back. */
-static struct termios orig_term;
-static void restore_term(void)
-{
-	tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
-}
-
-/* We associate some data with the console for our exit hack. */
+ * We associate some data with the console for our exit hack. */
 struct console_abort
 {
 	/* How many times have they hit ^C? */
@@ -766,276 +708,275 @@
 };
 
 /* This is the routine which handles console input (ie. stdin). */
-static bool handle_console_input(int fd, struct device *dev)
+static void console_input(struct virtqueue *vq)
 {
 	int len;
 	unsigned int head, in_num, out_num;
-	struct iovec iov[dev->vq->vring.num];
-	struct console_abort *abort = dev->priv;
+	struct console_abort *abort = vq->dev->priv;
+	struct iovec iov[vq->vring.num];
 
-	/* First we need a console buffer from the Guests's input virtqueue. */
-	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
-
-	/* If they're not ready for input, stop listening to this file
-	 * descriptor.  We'll start again once they add an input buffer. */
-	if (head == dev->vq->vring.num)
-		return false;
-
+	/* Make sure there's a descriptor waiting. */
+	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 	if (out_num)
 		errx(1, "Output buffers in console in queue?");
 
-	/* This is why we convert to iovecs: the readv() call uses them, and so
-	 * it reads straight into the Guest's buffer. */
-	len = readv(dev->fd, iov, in_num);
+	/* Read it in. */
+	len = readv(STDIN_FILENO, iov, in_num);
 	if (len <= 0) {
-		/* This implies that the console is closed, is /dev/null, or
-		 * something went terribly wrong. */
+		/* Ran out of input? */
 		warnx("Failed to get console input, ignoring console.");
-		/* Put the input terminal back. */
-		restore_term();
-		/* Remove callback from input vq, so it doesn't restart us. */
-		dev->vq->handle_output = NULL;
-		/* Stop listening to this fd: don't call us again. */
-		return false;
+		/* For simplicity, dying threads kill the whole Launcher.  So
+		 * just nap here. */
+		for (;;)
+			pause();
 	}
 
-	/* Tell the Guest about the new input. */
-	add_used_and_trigger(fd, dev->vq, head, len);
+	add_used_and_trigger(vq, head, len);
 
 	/* Three ^C within one second?  Exit.
 	 *
-	 * This is such a hack, but works surprisingly well.  Each ^C has to be
-	 * in a buffer by itself, so they can't be too fast.  But we check that
-	 * we get three within about a second, so they can't be too slow. */
-	if (len == 1 && ((char *)iov[0].iov_base)[0] == 3) {
-		if (!abort->count++)
-			gettimeofday(&abort->start, NULL);
-		else if (abort->count == 3) {
-			struct timeval now;
-			gettimeofday(&now, NULL);
-			if (now.tv_sec <= abort->start.tv_sec+1) {
-				unsigned long args[] = { LHREQ_BREAK, 0 };
-				/* Close the fd so Waker will know it has to
-				 * exit. */
-				close(waker_fds.pipe[1]);
-				/* Just in case Waker is blocked in BREAK, send
-				 * unbreak now. */
-				write(fd, args, sizeof(args));
-				exit(2);
-			}
-			abort->count = 0;
-		}
-	} else
-		/* Any other key resets the abort counter. */
+	 * This is such a hack, but works surprisingly well.  Each ^C has to
+	 * be in a buffer by itself, so they can't be too fast.  But we check
+	 * that we get three within about a second, so they can't be too
+	 * slow. */
+	if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
 		abort->count = 0;
+		return;
+	}
 
-	/* Everything went OK! */
-	return true;
-}
-
-/* Handling output for console is simple: we just get all the output buffers
- * and write them to stdout. */
-static void handle_console_output(int fd, struct virtqueue *vq, bool timeout)
-{
-	unsigned int head, out, in;
-	int len;
-	struct iovec iov[vq->vring.num];
-
-	/* Keep getting output buffers from the Guest until we run out. */
-	while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) {
-		if (in)
-			errx(1, "Input buffers in output queue?");
-		len = writev(STDOUT_FILENO, iov, out);
-		add_used_and_trigger(fd, vq, head, len);
+	abort->count++;
+	if (abort->count == 1)
+		gettimeofday(&abort->start, NULL);
+	else if (abort->count == 3) {
+		struct timeval now;
+		gettimeofday(&now, NULL);
+		/* Kill all Launcher processes with SIGINT, like normal ^C */
+		if (now.tv_sec <= abort->start.tv_sec+1)
+			kill(0, SIGINT);
+		abort->count = 0;
 	}
 }
 
-/* This is called when we no longer want to hear about Guest changes to a
- * virtqueue.  This is more efficient in high-traffic cases, but it means we
- * have to set a timer to check if any more changes have occurred. */
-static void block_vq(struct virtqueue *vq)
+/* This is the routine which handles console output (ie. stdout). */
+static void console_output(struct virtqueue *vq)
 {
-	struct itimerval itm;
+	unsigned int head, out, in;
+	struct iovec iov[vq->vring.num];
 
-	vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
-	vq->blocked = true;
-
-	itm.it_interval.tv_sec = 0;
-	itm.it_interval.tv_usec = 0;
-	itm.it_value.tv_sec = 0;
-	itm.it_value.tv_usec = timeout_usec;
-
-	setitimer(ITIMER_REAL, &itm, NULL);
+	head = wait_for_vq_desc(vq, iov, &out, &in);
+	if (in)
+		errx(1, "Input buffers in console output queue?");
+	while (!iov_empty(iov, out)) {
+		int len = writev(STDOUT_FILENO, iov, out);
+		if (len <= 0)
+			err(1, "Write to stdout gave %i", len);
+		iov_consume(iov, out, len);
+	}
+	add_used(vq, head, 0);
 }
 
 /*
  * The Network
  *
  * Handling output for network is also simple: we get all the output buffers
- * and write them (ignoring the first element) to this device's file descriptor
- * (/dev/net/tun).
+ * and write them to /dev/net/tun.
  */
-static void handle_net_output(int fd, struct virtqueue *vq, bool timeout)
+struct net_info {
+	int tunfd;
+};
+
+static void net_output(struct virtqueue *vq)
 {
-	unsigned int head, out, in, num = 0;
-	int len;
+	struct net_info *net_info = vq->dev->priv;
+	unsigned int head, out, in;
 	struct iovec iov[vq->vring.num];
-	static int last_timeout_num;
 
-	/* Keep getting output buffers from the Guest until we run out. */
-	while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) {
-		if (in)
-			errx(1, "Input buffers in output queue?");
-		len = writev(vq->dev->fd, iov, out);
-		if (len < 0)
-			err(1, "Writing network packet to tun");
-		add_used_and_trigger(fd, vq, head, len);
-		num++;
-	}
-
-	/* Block further kicks and set up a timer if we saw anything. */
-	if (!timeout && num)
-		block_vq(vq);
-
-	/* We never quite know how long should we wait before we check the
-	 * queue again for more packets.  We start at 500 microseconds, and if
-	 * we get fewer packets than last time, we assume we made the timeout
-	 * too small and increase it by 10 microseconds.  Otherwise, we drop it
-	 * by one microsecond every time.  It seems to work well enough. */
-	if (timeout) {
-		if (num < last_timeout_num)
-			timeout_usec += 10;
-		else if (timeout_usec > 1)
-			timeout_usec--;
-		last_timeout_num = num;
-	}
+	head = wait_for_vq_desc(vq, iov, &out, &in);
+	if (in)
+		errx(1, "Input buffers in net output queue?");
+	if (writev(net_info->tunfd, iov, out) < 0)
+		errx(1, "Write to tun failed?");
+	add_used(vq, head, 0);
 }
 
-/* This is where we handle a packet coming in from the tun device to our
+/* Will reading from this file descriptor block? */
+static bool will_block(int fd)
+{
+	fd_set fdset;
+	struct timeval zero = { 0, 0 };
+	FD_ZERO(&fdset);
+	FD_SET(fd, &fdset);
+	return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
+}
+
+/* This is where we handle packets coming in from the tun device to our
  * Guest. */
-static bool handle_tun_input(int fd, struct device *dev)
+static void net_input(struct virtqueue *vq)
 {
-	unsigned int head, in_num, out_num;
 	int len;
-	struct iovec iov[dev->vq->vring.num];
+	unsigned int head, out, in;
+	struct iovec iov[vq->vring.num];
+	struct net_info *net_info = vq->dev->priv;
 
-	/* First we need a network buffer from the Guests's recv virtqueue. */
-	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
-	if (head == dev->vq->vring.num) {
-		/* Now, it's expected that if we try to send a packet too
-		 * early, the Guest won't be ready yet.  Wait until the device
-		 * status says it's ready. */
-		/* FIXME: Actually want DRIVER_ACTIVE here. */
+	head = wait_for_vq_desc(vq, iov, &out, &in);
+	if (out)
+		errx(1, "Output buffers in net input queue?");
 
-		/* Now tell it we want to know if new things appear. */
-		dev->vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
-		wmb();
+	/* Deliver interrupt now, since we're about to sleep. */
+	if (vq->pending_used && will_block(net_info->tunfd))
+		trigger_irq(vq);
 
-		/* We'll turn this back on if input buffers are registered. */
-		return false;
-	} else if (out_num)
-		errx(1, "Output buffers in network recv queue?");
-
-	/* Read the packet from the device directly into the Guest's buffer. */
-	len = readv(dev->fd, iov, in_num);
+	len = readv(net_info->tunfd, iov, in);
 	if (len <= 0)
-		err(1, "reading network");
-
-	/* Tell the Guest about the new packet. */
-	add_used_and_trigger(fd, dev->vq, head, len);
-
-	verbose("tun input packet len %i [%02x %02x] (%s)\n", len,
-		((u8 *)iov[1].iov_base)[0], ((u8 *)iov[1].iov_base)[1],
-		head != dev->vq->vring.num ? "sent" : "discarded");
-
-	/* All good. */
-	return true;
+		err(1, "Failed to read from tun.");
+	add_used(vq, head, len);
 }
 
-/*L:215 This is the callback attached to the network and console input
- * virtqueues: it ensures we try again, in case we stopped console or net
- * delivery because Guest didn't have any buffers. */
-static void enable_fd(int fd, struct virtqueue *vq, bool timeout)
+/* This is the helper to create threads. */
+static int do_thread(void *_vq)
 {
-	add_device_fd(vq->dev->fd);
-	/* Snap the Waker out of its select loop. */
-	write(waker_fds.pipe[1], "", 1);
+	struct virtqueue *vq = _vq;
+
+	for (;;)
+		vq->service(vq);
+	return 0;
 }
 
-static void net_enable_fd(int fd, struct virtqueue *vq, bool timeout)
+/* When a child dies, we kill our entire process group with SIGTERM.  This
+ * also has the side effect that the shell restores the console for us! */
+static void kill_launcher(int signal)
 {
-	/* We don't need to know again when Guest refills receive buffer. */
-	vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
-	enable_fd(fd, vq, timeout);
+	kill(0, SIGTERM);
+}
+
+static void reset_device(struct device *dev)
+{
+	struct virtqueue *vq;
+
+	verbose("Resetting device %s\n", dev->name);
+
+	/* Clear any features they've acked. */
+	memset(get_feature_bits(dev) + dev->feature_len, 0, dev->feature_len);
+
+	/* We're going to be explicitly killing threads, so ignore them. */
+	signal(SIGCHLD, SIG_IGN);
+
+	/* Zero out the virtqueues, get rid of their threads */
+	for (vq = dev->vq; vq; vq = vq->next) {
+		if (vq->thread != (pid_t)-1) {
+			kill(vq->thread, SIGTERM);
+			waitpid(vq->thread, NULL, 0);
+			vq->thread = (pid_t)-1;
+		}
+		memset(vq->vring.desc, 0,
+		       vring_size(vq->config.num, LGUEST_VRING_ALIGN));
+		lg_last_avail(vq) = 0;
+	}
+	dev->running = false;
+
+	/* Now we care if threads die. */
+	signal(SIGCHLD, (void *)kill_launcher);
+}
+
+static void create_thread(struct virtqueue *vq)
+{
+	/* Create stack for thread and run it.  Since stack grows
+	 * upwards, we point the stack pointer to the end of this
+	 * region. */
+	char *stack = malloc(32768);
+	unsigned long args[] = { LHREQ_EVENTFD,
+				 vq->config.pfn*getpagesize(), 0 };
+
+	/* Create a zero-initialized eventfd. */
+	vq->eventfd = eventfd(0, 0);
+	if (vq->eventfd < 0)
+		err(1, "Creating eventfd");
+	args[2] = vq->eventfd;
+
+	/* Attach an eventfd to this virtqueue: it will go off
+	 * when the Guest does an LHCALL_NOTIFY for this vq. */
+	if (write(lguest_fd, &args, sizeof(args)) != 0)
+		err(1, "Attaching eventfd");
+
+	/* CLONE_VM: because it has to access the Guest memory, and
+	 * SIGCHLD so we get a signal if it dies. */
+	vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
+	if (vq->thread == (pid_t)-1)
+		err(1, "Creating clone");
+	/* We close our local copy, now the child has it. */
+	close(vq->eventfd);
+}
+
+static void start_device(struct device *dev)
+{
+	unsigned int i;
+	struct virtqueue *vq;
+
+	verbose("Device %s OK: offered", dev->name);
+	for (i = 0; i < dev->feature_len; i++)
+		verbose(" %02x", get_feature_bits(dev)[i]);
+	verbose(", accepted");
+	for (i = 0; i < dev->feature_len; i++)
+		verbose(" %02x", get_feature_bits(dev)
+			[dev->feature_len+i]);
+
+	for (vq = dev->vq; vq; vq = vq->next) {
+		if (vq->service)
+			create_thread(vq);
+	}
+	dev->running = true;
+}
+
+static void cleanup_devices(void)
+{
+	struct device *dev;
+
+	for (dev = devices.dev; dev; dev = dev->next)
+		reset_device(dev);
+
+	/* If we saved off the original terminal settings, restore them now. */
+	if (orig_term.c_lflag & (ISIG|ICANON|ECHO))
+		tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
 }
 
 /* When the Guest tells us they updated the status field, we handle it. */
 static void update_device_status(struct device *dev)
 {
-	struct virtqueue *vq;
-
-	/* This is a reset. */
-	if (dev->desc->status == 0) {
-		verbose("Resetting device %s\n", dev->name);
-
-		/* Clear any features they've acked. */
-		memset(get_feature_bits(dev) + dev->desc->feature_len, 0,
-		       dev->desc->feature_len);
-
-		/* Zero out the virtqueues. */
-		for (vq = dev->vq; vq; vq = vq->next) {
-			memset(vq->vring.desc, 0,
-			       vring_size(vq->config.num, LGUEST_VRING_ALIGN));
-			lg_last_avail(vq) = 0;
-		}
-	} else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
+	/* A zero status is a reset, otherwise it's a set of flags. */
+	if (dev->desc->status == 0)
+		reset_device(dev);
+	else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
 		warnx("Device %s configuration FAILED", dev->name);
+		if (dev->running)
+			reset_device(dev);
 	} else if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK) {
-		unsigned int i;
-
-		verbose("Device %s OK: offered", dev->name);
-		for (i = 0; i < dev->desc->feature_len; i++)
-			verbose(" %02x", get_feature_bits(dev)[i]);
-		verbose(", accepted");
-		for (i = 0; i < dev->desc->feature_len; i++)
-			verbose(" %02x", get_feature_bits(dev)
-				[dev->desc->feature_len+i]);
-
-		if (dev->ready)
-			dev->ready(dev);
+		if (!dev->running)
+			start_device(dev);
 	}
 }
 
 /* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */
-static void handle_output(int fd, unsigned long addr)
+static void handle_output(unsigned long addr)
 {
 	struct device *i;
-	struct virtqueue *vq;
 
-	/* Check each device and virtqueue. */
+	/* Check each device. */
 	for (i = devices.dev; i; i = i->next) {
+		struct virtqueue *vq;
+
 		/* Notifications to device descriptors update device status. */
 		if (from_guest_phys(addr) == i->desc) {
 			update_device_status(i);
 			return;
 		}
 
-		/* Notifications to virtqueues mean output has occurred. */
+		/* Devices *can* be used before status is set to DRIVER_OK. */
 		for (vq = i->vq; vq; vq = vq->next) {
-			if (vq->config.pfn != addr/getpagesize())
+			if (addr != vq->config.pfn*getpagesize())
 				continue;
-
-			/* Guest should acknowledge (and set features!)  before
-			 * using the device. */
-			if (i->desc->status == 0) {
-				warnx("%s gave early output", i->name);
-				return;
-			}
-
-			if (strcmp(vq->dev->name, "console") != 0)
-				verbose("Output to %s\n", vq->dev->name);
-			if (vq->handle_output)
-				vq->handle_output(fd, vq, false);
+			if (i->running)
+				errx(1, "Notification on running %s", i->name);
+			start_device(i);
 			return;
 		}
 	}
@@ -1049,71 +990,6 @@
 	      strnlen(from_guest_phys(addr), guest_limit - addr));
 }
 
-static void handle_timeout(int fd)
-{
-	char buf[32];
-	struct device *i;
-	struct virtqueue *vq;
-
-	/* Clear the pipe */
-	read(timeoutpipe[0], buf, sizeof(buf));
-
-	/* Check each device and virtqueue: flush blocked ones. */
-	for (i = devices.dev; i; i = i->next) {
-		for (vq = i->vq; vq; vq = vq->next) {
-			if (!vq->blocked)
-				continue;
-
-			vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
-			vq->blocked = false;
-			if (vq->handle_output)
-				vq->handle_output(fd, vq, true);
-		}
-	}
-}
-
-/* This is called when the Waker wakes us up: check for incoming file
- * descriptors. */
-static void handle_input(int fd)
-{
-	/* select() wants a zeroed timeval to mean "don't wait". */
-	struct timeval poll = { .tv_sec = 0, .tv_usec = 0 };
-
-	for (;;) {
-		struct device *i;
-		fd_set fds = devices.infds;
-		int num;
-
-		num = select(devices.max_infd+1, &fds, NULL, NULL, &poll);
-		/* Could get interrupted */
-		if (num < 0)
-			continue;
-		/* If nothing is ready, we're done. */
-		if (num == 0)
-			break;
-
-		/* Otherwise, call the device(s) which have readable file
-		 * descriptors and a method of handling them.  */
-		for (i = devices.dev; i; i = i->next) {
-			if (i->handle_input && FD_ISSET(i->fd, &fds)) {
-				if (i->handle_input(fd, i))
-					continue;
-
-				/* If handle_input() returns false, it means we
-				 * should no longer service it.  Networking and
-				 * console do this when there's no input
-				 * buffers to deliver into.  Console also uses
-				 * it when it discovers that stdin is closed. */
-				FD_CLR(i->fd, &devices.infds);
-			}
-		}
-
-		/* Is this the timeout fd? */
-		if (FD_ISSET(timeoutpipe[0], &fds))
-			handle_timeout(fd);
-	}
-}
-
 /*L:190
  * Device Setup
  *
@@ -1129,8 +1005,8 @@
 static u8 *device_config(const struct device *dev)
 {
 	return (void *)(dev->desc + 1)
-		+ dev->desc->num_vq * sizeof(struct lguest_vqconfig)
-		+ dev->desc->feature_len * 2;
+		+ dev->num_vq * sizeof(struct lguest_vqconfig)
+		+ dev->feature_len * 2;
 }
 
 /* This routine allocates a new "struct lguest_device_desc" from descriptor
@@ -1159,7 +1035,7 @@
 /* Each device descriptor is followed by the description of its virtqueues.  We
  * specify how many descriptors the virtqueue is to have. */
 static void add_virtqueue(struct device *dev, unsigned int num_descs,
-			  void (*handle_output)(int, struct virtqueue *, bool))
+			  void (*service)(struct virtqueue *))
 {
 	unsigned int pages;
 	struct virtqueue **i, *vq = malloc(sizeof(*vq));
@@ -1174,8 +1050,8 @@
 	vq->next = NULL;
 	vq->last_avail_idx = 0;
 	vq->dev = dev;
-	vq->inflight = 0;
-	vq->blocked = false;
+	vq->service = service;
+	vq->thread = (pid_t)-1;
 
 	/* Initialize the configuration. */
 	vq->config.num = num_descs;
@@ -1191,6 +1067,7 @@
 	 * yet, otherwise we'd be overwriting them. */
 	assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
 	memcpy(device_config(dev), &vq->config, sizeof(vq->config));
+	dev->num_vq++;
 	dev->desc->num_vq++;
 
 	verbose("Virtqueue page %#lx\n", to_guest_phys(p));
@@ -1199,15 +1076,6 @@
 	 * second.  */
 	for (i = &dev->vq; *i; i = &(*i)->next);
 	*i = vq;
-
-	/* Set the routine to call when the Guest does something to this
-	 * virtqueue. */
-	vq->handle_output = handle_output;
-
-	/* As an optimization, set the advisory "Don't Notify Me" flag if we
-	 * don't have a handler */
-	if (!handle_output)
-		vq->vring.used->flags = VRING_USED_F_NO_NOTIFY;
 }
 
 /* The first half of the feature bitmask is for us to advertise features.  The
@@ -1219,7 +1087,7 @@
 	/* We can't extend the feature bits once we've added config bytes */
 	if (dev->desc->feature_len <= bit / CHAR_BIT) {
 		assert(dev->desc->config_len == 0);
-		dev->desc->feature_len = (bit / CHAR_BIT) + 1;
+		dev->feature_len = dev->desc->feature_len = (bit/CHAR_BIT) + 1;
 	}
 
 	features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
@@ -1243,22 +1111,17 @@
  * calling new_dev_desc() to allocate the descriptor and device memory.
  *
  * See what I mean about userspace being boring? */
-static struct device *new_device(const char *name, u16 type, int fd,
-				 bool (*handle_input)(int, struct device *))
+static struct device *new_device(const char *name, u16 type)
 {
 	struct device *dev = malloc(sizeof(*dev));
 
 	/* Now we populate the fields one at a time. */
-	dev->fd = fd;
-	/* If we have an input handler for this file descriptor, then we add it
-	 * to the device_list's fdset and maxfd. */
-	if (handle_input)
-		add_device_fd(dev->fd);
 	dev->desc = new_dev_desc(type);
-	dev->handle_input = handle_input;
 	dev->name = name;
 	dev->vq = NULL;
-	dev->ready = NULL;
+	dev->feature_len = 0;
+	dev->num_vq = 0;
+	dev->running = false;
 
 	/* Append to device list.  Prepending to a single-linked list is
 	 * easier, but the user expects the devices to be arranged on the bus
@@ -1286,13 +1149,10 @@
 		 * raw input stream to the Guest. */
 		term.c_lflag &= ~(ISIG|ICANON|ECHO);
 		tcsetattr(STDIN_FILENO, TCSANOW, &term);
-		/* If we exit gracefully, the original settings will be
-		 * restored so the user can see what they're typing. */
-		atexit(restore_term);
 	}
 
-	dev = new_device("console", VIRTIO_ID_CONSOLE,
-			 STDIN_FILENO, handle_console_input);
+	dev = new_device("console", VIRTIO_ID_CONSOLE);
+
 	/* We store the console state in dev->priv, and initialize it. */
 	dev->priv = malloc(sizeof(struct console_abort));
 	((struct console_abort *)dev->priv)->count = 0;
@@ -1301,31 +1161,13 @@
 	 * they put something the input queue, we make sure we're listening to
 	 * stdin.  When they put something in the output queue, we write it to
 	 * stdout. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
-	add_virtqueue(dev, VIRTQUEUE_NUM, handle_console_output);
+	add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
+	add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
 
-	verbose("device %u: console\n", devices.device_num++);
+	verbose("device %u: console\n", ++devices.device_num);
 }
 /*:*/
 
-static void timeout_alarm(int sig)
-{
-	write(timeoutpipe[1], "", 1);
-}
-
-static void setup_timeout(void)
-{
-	if (pipe(timeoutpipe) != 0)
-		err(1, "Creating timeout pipe");
-
-	if (fcntl(timeoutpipe[1], F_SETFL,
-		  fcntl(timeoutpipe[1], F_GETFL) | O_NONBLOCK) != 0)
-		err(1, "Making timeout pipe nonblocking");
-
-	add_device_fd(timeoutpipe[0]);
-	signal(SIGALRM, timeout_alarm);
-}
-
 /*M:010 Inter-guest networking is an interesting area.  Simplest is to have a
  * --sharenet=<name> option which opens or creates a named pipe.  This can be
  * used to send packets to another guest in a 1:1 manner.
@@ -1447,21 +1289,23 @@
 static void setup_tun_net(char *arg)
 {
 	struct device *dev;
-	int netfd, ipfd;
+	struct net_info *net_info = malloc(sizeof(*net_info));
+	int ipfd;
 	u32 ip = INADDR_ANY;
 	bool bridging = false;
 	char tapif[IFNAMSIZ], *p;
 	struct virtio_net_config conf;
 
-	netfd = get_tun_device(tapif);
+	net_info->tunfd = get_tun_device(tapif);
 
 	/* First we create a new network device. */
-	dev = new_device("net", VIRTIO_ID_NET, netfd, handle_tun_input);
+	dev = new_device("net", VIRTIO_ID_NET);
+	dev->priv = net_info;
 
 	/* Network devices need a receive and a send queue, just like
 	 * console. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, net_enable_fd);
-	add_virtqueue(dev, VIRTQUEUE_NUM, handle_net_output);
+	add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
+	add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
 
 	/* We need a socket to perform the magic network ioctls to bring up the
 	 * tap interface, connect to the bridge etc.  Any socket will do! */
@@ -1502,6 +1346,8 @@
 	add_feature(dev, VIRTIO_NET_F_HOST_TSO4);
 	add_feature(dev, VIRTIO_NET_F_HOST_TSO6);
 	add_feature(dev, VIRTIO_NET_F_HOST_ECN);
+	/* We handle indirect ring entries */
+	add_feature(dev, VIRTIO_RING_F_INDIRECT_DESC);
 	set_config(dev, sizeof(conf), &conf);
 
 	/* We don't need the socket any more; setup is done. */
@@ -1550,20 +1396,18 @@
  * Remember that the block device is handled by a separate I/O thread.  We head
  * straight into the core of that thread here:
  */
-static bool service_io(struct device *dev)
+static void blk_request(struct virtqueue *vq)
 {
-	struct vblk_info *vblk = dev->priv;
+	struct vblk_info *vblk = vq->dev->priv;
 	unsigned int head, out_num, in_num, wlen;
 	int ret;
 	u8 *in;
 	struct virtio_blk_outhdr *out;
-	struct iovec iov[dev->vq->vring.num];
+	struct iovec iov[vq->vring.num];
 	off64_t off;
 
-	/* See if there's a request waiting.  If not, nothing to do. */
-	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
-	if (head == dev->vq->vring.num)
-		return false;
+	/* Get the next request. */
+	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 
 	/* Every block request should contain at least one output buffer
 	 * (detailing the location on disk and the type of request) and one
@@ -1637,83 +1481,21 @@
 	if (out->type & VIRTIO_BLK_T_BARRIER)
 		fdatasync(vblk->fd);
 
-	/* We can't trigger an IRQ, because we're not the Launcher.  It does
-	 * that when we tell it we're done. */
-	add_used(dev->vq, head, wlen);
-	return true;
-}
-
-/* This is the thread which actually services the I/O. */
-static int io_thread(void *_dev)
-{
-	struct device *dev = _dev;
-	struct vblk_info *vblk = dev->priv;
-	char c;
-
-	/* Close other side of workpipe so we get 0 read when main dies. */
-	close(vblk->workpipe[1]);
-	/* Close the other side of the done_fd pipe. */
-	close(dev->fd);
-
-	/* When this read fails, it means Launcher died, so we follow. */
-	while (read(vblk->workpipe[0], &c, 1) == 1) {
-		/* We acknowledge each request immediately to reduce latency,
-		 * rather than waiting until we've done them all.  I haven't
-		 * measured to see if it makes any difference.
-		 *
-		 * That would be an interesting test, wouldn't it?  You could
-		 * also try having more than one I/O thread. */
-		while (service_io(dev))
-			write(vblk->done_fd, &c, 1);
-	}
-	return 0;
-}
-
-/* Now we've seen the I/O thread, we return to the Launcher to see what happens
- * when that thread tells us it's completed some I/O. */
-static bool handle_io_finish(int fd, struct device *dev)
-{
-	char c;
-
-	/* If the I/O thread died, presumably it printed the error, so we
-	 * simply exit. */
-	if (read(dev->fd, &c, 1) != 1)
-		exit(1);
-
-	/* It did some work, so trigger the irq. */
-	trigger_irq(fd, dev->vq);
-	return true;
-}
-
-/* When the Guest submits some I/O, we just need to wake the I/O thread. */
-static void handle_virtblk_output(int fd, struct virtqueue *vq, bool timeout)
-{
-	struct vblk_info *vblk = vq->dev->priv;
-	char c = 0;
-
-	/* Wake up I/O thread and tell it to go to work! */
-	if (write(vblk->workpipe[1], &c, 1) != 1)
-		/* Presumably it indicated why it died. */
-		exit(1);
+	add_used(vq, head, wlen);
 }
 
 /*L:198 This actually sets up a virtual block device. */
 static void setup_block_file(const char *filename)
 {
-	int p[2];
 	struct device *dev;
 	struct vblk_info *vblk;
-	void *stack;
 	struct virtio_blk_config conf;
 
-	/* This is the pipe the I/O thread will use to tell us I/O is done. */
-	pipe(p);
-
 	/* The device responds to return from I/O thread. */
-	dev = new_device("block", VIRTIO_ID_BLOCK, p[0], handle_io_finish);
+	dev = new_device("block", VIRTIO_ID_BLOCK);
 
 	/* The device has one virtqueue, where the Guest places requests. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, handle_virtblk_output);
+	add_virtqueue(dev, VIRTQUEUE_NUM, blk_request);
 
 	/* Allocate the room for our own bookkeeping */
 	vblk = dev->priv = malloc(sizeof(*vblk));
@@ -1735,49 +1517,29 @@
 
 	set_config(dev, sizeof(conf), &conf);
 
-	/* The I/O thread writes to this end of the pipe when done. */
-	vblk->done_fd = p[1];
-
-	/* This is the second pipe, which is how we tell the I/O thread about
-	 * more work. */
-	pipe(vblk->workpipe);
-
-	/* Create stack for thread and run it.  Since stack grows upwards, we
-	 * point the stack pointer to the end of this region. */
-	stack = malloc(32768);
-	/* SIGCHLD - We dont "wait" for our cloned thread, so prevent it from
-	 * becoming a zombie. */
-	if (clone(io_thread, stack + 32768, CLONE_VM | SIGCHLD, dev) == -1)
-		err(1, "Creating clone");
-
-	/* We don't need to keep the I/O thread's end of the pipes open. */
-	close(vblk->done_fd);
-	close(vblk->workpipe[0]);
-
 	verbose("device %u: virtblock %llu sectors\n",
-		devices.device_num, le64_to_cpu(conf.capacity));
+		++devices.device_num, le64_to_cpu(conf.capacity));
 }
 
+struct rng_info {
+	int rfd;
+};
+
 /* Our random number generator device reads from /dev/random into the Guest's
  * input buffers.  The usual case is that the Guest doesn't want random numbers
  * and so has no buffers although /dev/random is still readable, whereas
  * console is the reverse.
  *
  * The same logic applies, however. */
-static bool handle_rng_input(int fd, struct device *dev)
+static void rng_input(struct virtqueue *vq)
 {
 	int len;
 	unsigned int head, in_num, out_num, totlen = 0;
-	struct iovec iov[dev->vq->vring.num];
+	struct rng_info *rng_info = vq->dev->priv;
+	struct iovec iov[vq->vring.num];
 
 	/* First we need a buffer from the Guests's virtqueue. */
-	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
-
-	/* If they're not ready for input, stop listening to this file
-	 * descriptor.  We'll start again once they add an input buffer. */
-	if (head == dev->vq->vring.num)
-		return false;
-
+	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 	if (out_num)
 		errx(1, "Output buffers in rng?");
 
@@ -1785,7 +1547,7 @@
 	 * it reads straight into the Guest's buffer.  We loop to make sure we
 	 * fill it. */
 	while (!iov_empty(iov, in_num)) {
-		len = readv(dev->fd, iov, in_num);
+		len = readv(rng_info->rfd, iov, in_num);
 		if (len <= 0)
 			err(1, "Read from /dev/random gave %i", len);
 		iov_consume(iov, in_num, len);
@@ -1793,25 +1555,23 @@
 	}
 
 	/* Tell the Guest about the new input. */
-	add_used_and_trigger(fd, dev->vq, head, totlen);
-
-	/* Everything went OK! */
-	return true;
+	add_used(vq, head, totlen);
 }
 
 /* And this creates a "hardware" random number device for the Guest. */
 static void setup_rng(void)
 {
 	struct device *dev;
-	int fd;
+	struct rng_info *rng_info = malloc(sizeof(*rng_info));
 
-	fd = open_or_die("/dev/random", O_RDONLY);
+	rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
 
 	/* The device responds to return from I/O thread. */
-	dev = new_device("rng", VIRTIO_ID_RNG, fd, handle_rng_input);
+	dev = new_device("rng", VIRTIO_ID_RNG);
+	dev->priv = rng_info;
 
 	/* The device has one virtqueue, where the Guest places inbufs. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
+	add_virtqueue(dev, VIRTQUEUE_NUM, rng_input);
 
 	verbose("device %u: rng\n", devices.device_num++);
 }
@@ -1827,17 +1587,18 @@
 	for (i = 3; i < FD_SETSIZE; i++)
 		close(i);
 
-	/* The exec automatically gets rid of the I/O and Waker threads. */
+	/* Reset all the devices (kills all threads). */
+	cleanup_devices();
+
 	execv(main_args[0], main_args);
 	err(1, "Could not exec %s", main_args[0]);
 }
 
 /*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
  * its input and output, and finally, lays it to rest. */
-static void __attribute__((noreturn)) run_guest(int lguest_fd)
+static void __attribute__((noreturn)) run_guest(void)
 {
 	for (;;) {
-		unsigned long args[] = { LHREQ_BREAK, 0 };
 		unsigned long notify_addr;
 		int readval;
 
@@ -1848,8 +1609,7 @@
 		/* One unsigned long means the Guest did HCALL_NOTIFY */
 		if (readval == sizeof(notify_addr)) {
 			verbose("Notify on address %#lx\n", notify_addr);
-			handle_output(lguest_fd, notify_addr);
-			continue;
+			handle_output(notify_addr);
 		/* ENOENT means the Guest died.  Reading tells us why. */
 		} else if (errno == ENOENT) {
 			char reason[1024] = { 0 };
@@ -1858,19 +1618,9 @@
 		/* ERESTART means that we need to reboot the guest */
 		} else if (errno == ERESTART) {
 			restart_guest();
-		/* EAGAIN means a signal (timeout).
-		 * Anything else means a bug or incompatible change. */
-		} else if (errno != EAGAIN)
+		/* Anything else means a bug or incompatible change. */
+		} else
 			err(1, "Running guest failed");
-
-		/* Only service input on thread for CPU 0. */
-		if (cpu_id != 0)
-			continue;
-
-		/* Service input, then unset the BREAK to release the Waker. */
-		handle_input(lguest_fd);
-		if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0)
-			err(1, "Resetting break");
 	}
 }
 /*L:240
@@ -1904,8 +1654,8 @@
 	/* Memory, top-level pagetable, code startpoint and size of the
 	 * (optional) initrd. */
 	unsigned long mem = 0, start, initrd_size = 0;
-	/* Two temporaries and the /dev/lguest file descriptor. */
-	int i, c, lguest_fd;
+	/* Two temporaries. */
+	int i, c;
 	/* The boot information for the Guest. */
 	struct boot_params *boot;
 	/* If they specify an initrd file to load. */
@@ -1913,18 +1663,10 @@
 
 	/* Save the args: we "reboot" by execing ourselves again. */
 	main_args = argv;
-	/* We don't "wait" for the children, so prevent them from becoming
-	 * zombies. */
-	signal(SIGCHLD, SIG_IGN);
 
-	/* First we initialize the device list.  Since console and network
-	 * device receive input from a file descriptor, we keep an fdset
-	 * (infds) and the maximum fd number (max_infd) with the head of the
-	 * list.  We also keep a pointer to the last device.  Finally, we keep
-	 * the next interrupt number to use for devices (1: remember that 0 is
-	 * used by the timer). */
-	FD_ZERO(&devices.infds);
-	devices.max_infd = -1;
+	/* First we initialize the device list.  We keep a pointer to the last
+	 * device, and the next interrupt number to use for devices (1:
+	 * remember that 0 is used by the timer). */
 	devices.lastdev = NULL;
 	devices.next_irq = 1;
 
@@ -1982,9 +1724,6 @@
 	/* We always have a console device */
 	setup_console();
 
-	/* We can timeout waiting for Guest network transmit. */
-	setup_timeout();
-
 	/* Now we load the kernel */
 	start = load_kernel(open_or_die(argv[optind+1], O_RDONLY));
 
@@ -2023,15 +1762,16 @@
 
 	/* We tell the kernel to initialize the Guest: this returns the open
 	 * /dev/lguest file descriptor. */
-	lguest_fd = tell_kernel(start);
+	tell_kernel(start);
 
-	/* We clone off a thread, which wakes the Launcher whenever one of the
-	 * input file descriptors needs attention.  We call this the Waker, and
-	 * we'll cover it in a moment. */
-	setup_waker(lguest_fd);
+	/* Ensure that we terminate if a child dies. */
+	signal(SIGCHLD, kill_launcher);
+
+	/* If we exit via err(), this kills all the threads, restores tty. */
+	atexit(cleanup_devices);
 
 	/* Finally, run the Guest.  This doesn't return. */
-	run_guest(lguest_fd);
+	run_guest();
 }
 /*:*/
 
diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt
index 28c7473..efb3a6a 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/lguest/lguest.txt
@@ -37,7 +37,6 @@
      "Paravirtualized guest support" = Y
         "Lguest guest support" = Y
      "High Memory Support" = off/4GB
-     "PAE (Physical Address Extension) Support" = N
      "Alignment value to which kernel should be aligned" = 0x100000
         (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
          CONFIG_PHYSICAL_ALIGN=0x100000)
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 012858d..5c08d96 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -460,6 +460,25 @@
 
     The power-management is supported.
 
+  Module snd-ctxfi
+  ----------------
+
+    Module for Creative Sound Blaster X-Fi boards (20k1 / 20k2 chips)
+	* Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series
+	* Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series
+	* Creative Sound Blaster X-Fi Titanium Professional Audio
+	* Creative Sound Blaster X-Fi Titanium
+	* Creative Sound Blaster X-Fi Elite Pro
+	* Creative Sound Blaster X-Fi Platinum
+	* Creative Sound Blaster X-Fi Fatal1ty
+	* Creative Sound Blaster X-Fi XtremeGamer
+	* Creative Sound Blaster X-Fi XtremeMusic
+
+    reference_rate	- reference sample rate, 44100 or 48000 (default)
+    multiple		- multiple to ref. sample rate, 1 or 2 (default)
+
+    This module supports multiple cards.
+
   Module snd-darla20
   ------------------
 
@@ -925,6 +944,7 @@
 			* Onkyo SE-90PCI
 			* Onkyo SE-200PCI
 			* ESI Juli@
+			* ESI Maya44
 			* Hercules Fortissimo IV
 			* EGO-SYS WaveTerminal 192M
 
@@ -933,7 +953,7 @@
 		  prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
 		  juli, aureon51, aureon71, universe, ap192, k8x800,
 		  phase22, phase28, ms300, av710, se200pci, se90pci,
-		  fortissimo4, sn25p, WT192M
+		  fortissimo4, sn25p, WT192M, maya44
 
     This module supports multiple cards and autoprobe.
 
@@ -1093,6 +1113,13 @@
     This module supports multiple cards.
     The driver requires the firmware loader support on kernel.
 
+  Module snd-lx6464es
+  -------------------
+
+    Module for Digigram LX6464ES boards
+
+    This module supports multiple cards.
+
   Module snd-maestro3
   -------------------
 
@@ -1543,13 +1570,15 @@
   Module snd-sc6000
   -----------------
 
-    Module for Gallant SC-6000 soundcard.
+    Module for Gallant SC-6000 soundcard and later models: SC-6600
+    and SC-7000.
 
     port	- Port # (0x220 or 0x240)
     mss_port	- MSS Port # (0x530 or 0xe80)
     irq		- IRQ # (5,7,9,10,11)
     mpu_irq	- MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq
     dma		- DMA # (1,3,0)
+    joystick	- Enable gameport - 0 = disable (default), 1 = enable
 
     This module supports multiple cards.
 
@@ -1859,7 +1888,8 @@
   -------------------
 
     Module for sound cards based on the Asus AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), and Essence STX.
+    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), Essence ST
+    (Deluxe) and Essence STX.
 
     This module supports autoprobe and multiple cards.
 
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 322869f..de8e10a 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -36,6 +36,7 @@
   acer		Acer TravelMate
   will		Will laptops (PB V7900)
   replacer	Replacer 672V
+  favorit100	Maxdata Favorit 100XS
   basic		fixed pin assignment (old default model)
   test		for testing/debugging purpose, almost all controls can
 		adjusted.  Appearing only when compiled with
@@ -85,10 +86,11 @@
   eeepc-p703	ASUS Eeepc P703 P900A
   eeepc-p901	ASUS Eeepc P901 S101
   fujitsu	FSC Amilo
+  lifebook	Fujitsu Lifebook S6420
   auto		auto-config reading BIOS (default)
 
-ALC662/663
-==========
+ALC662/663/272
+==============
   3stack-dig	3-stack (2-channel) with SPDIF
   3stack-6ch	 3-stack (6-channel)
   3stack-6ch-dig 3-stack (6-channel) with SPDIF
@@ -107,6 +109,9 @@
   asus-mode4	ASUS
   asus-mode5	ASUS
   asus-mode6	ASUS
+  dell		Dell with ALC272
+  dell-zm1	Dell ZM1 with ALC272
+  samsung-nc10	Samsung NC10 mini notebook
   auto		auto-config reading BIOS (default)
 
 ALC882/885
@@ -118,6 +123,7 @@
   asus-a7j	ASUS A7J
   asus-a7m	ASUS A7M
   macpro	MacPro support
+  mb5		Macbook 5,1
   mbp3		Macbook Pro rev3
   imac24	iMac 24'' with jack detection
   w2jc		ASUS W2JC
@@ -133,10 +139,12 @@
   acer		Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
   acer-aspire	Acer Aspire 9810
   acer-aspire-4930g Acer Aspire 4930G
+  acer-aspire-8930g Acer Aspire 8930G
   medion	Medion Laptops
   medion-md2	Medion MD2
   targa-dig	Targa/MSI
-  targa-2ch-dig	Targs/MSI with 2-channel
+  targa-2ch-dig	Targa/MSI with 2-channel
+  targa-8ch-dig Targa/MSI with 8-channel (MSI GX620)
   laptop-eapd   3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
   lenovo-101e	Lenovo 101E
   lenovo-nb0763	Lenovo NB0763
@@ -150,6 +158,9 @@
   fujitsu-pi2515 Fujitsu AMILO Pi2515
   fujitsu-xa3530 Fujitsu AMILO XA3530
   3stack-6ch-intel Intel DG33* boards
+  asus-p5q	ASUS P5Q-EM boards
+  mb31		MacBook 3,1
+  sony-vaio-tt  Sony VAIO TT
   auto		auto-config reading BIOS (default)
 
 ALC861/660
@@ -348,6 +359,7 @@
   hp-m4		HP mini 1000
   hp-dv5	HP dv series
   hp-hdx	HP HDX series
+  hp-dv4-1222nr	HP dv4-1222nr (with LED support)
   auto		BIOS setup (default)
 
 STAC92HD73*
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index cfac20c..381908d 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -88,26 +88,34 @@
 	substreams, etc.
 
 card*/pcm*/xrun_debug
-	This file appears when CONFIG_SND_DEBUG=y.
-	This shows the status of xrun (= buffer overrun/xrun) debug of
-	ALSA PCM middle layer, as an integer from 0 to 2.  The value
-	can be changed by writing to this file, such as
+	This file appears when CONFIG_SND_DEBUG=y and
+	CONFIG_PCM_XRUN_DEBUG=y.
+	This shows the status of xrun (= buffer overrun/xrun) and
+	invalid PCM position debug/check of ALSA PCM middle layer.
+	It takes an integer value, can be changed by writing to this
+	file, such as
 
-		 # cat 2 > /proc/asound/card0/pcm0p/xrun_debug
+		 # cat 5 > /proc/asound/card0/pcm0p/xrun_debug
 
-	When this value is greater than 0, the driver will show the
-	messages to kernel log when an xrun is detected.  The debug
-	message is shown also when the invalid H/W pointer is detected
-	at the update of periods (usually called from the interrupt
+	The value consists of the following bit flags:
+	  bit 0 = Enable XRUN/jiffies debug messages
+	  bit 1 = Show stack trace at XRUN / jiffies check
+	  bit 2 = Enable additional jiffies check
+
+	When the bit 0 is set, the driver will show the messages to
+	kernel log when an xrun is detected.  The debug message is
+	shown also when the invalid H/W pointer is detected at the
+	update of periods (usually called from the interrupt
 	handler).
 
-	When this value is greater than 1, the driver will show the
-	stack trace additionally.  This may help the debugging.
+	When the bit 1 is set, the driver will show the stack trace
+	additionally.  This may help the debugging.
 
-	Since 2.6.30, this option also enables the hwptr check using
+	Since 2.6.30, this option can enable the hwptr check using
 	jiffies.  This detects spontaneous invalid pointer callback
 	values, but can be lead to too much corrections for a (mostly
 	buggy) hardware that doesn't give smooth pointer updates.
+	This feature is enabled via the bit 2.
 
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
diff --git a/Documentation/sound/alsa/README.maya44 b/Documentation/sound/alsa/README.maya44
new file mode 100644
index 0000000..0e41576
--- /dev/null
+++ b/Documentation/sound/alsa/README.maya44
@@ -0,0 +1,163 @@
+NOTE: The following is the original document of Rainer's patch that the
+current maya44 code based on.  Some contents might be obsoleted, but I
+keep here as reference -- tiwai
+
+----------------------------------------------------------------
+ 
+STATE OF DEVELOPMENT:
+
+This driver is being developed on the initiative of Piotr Makowski (oponek@gmail.com) and financed by Lars Bergmann.
+Development is carried out by Rainer Zimmermann (mail@lightshed.de).
+
+ESI provided a sample Maya44 card for the development work.
+
+However, unfortunately it has turned out difficult to get detailed programming information, so I (Rainer Zimmermann) had to find out some card-specific information by experiment and conjecture. Some information (in particular, several GPIO bits) is still missing.
+
+This is the first testing version of the Maya44 driver released to the alsa-devel mailing list (Feb 5, 2008).
+
+
+The following functions work, as tested by Rainer Zimmermann and Piotr Makowski:
+
+- playback and capture at all sampling rates
+- input/output level
+- crossmixing
+- line/mic switch
+- phantom power switch
+- analogue monitor a.k.a bypass
+
+
+The following functions *should* work, but are not fully tested:
+
+- Channel 3+4 analogue - S/PDIF input switching
+- S/PDIF output
+- all inputs/outputs on the M/IO/DIO extension card
+- internal/external clock selection
+
+
+*In particular, we would appreciate testing of these functions by anyone who has access to an M/IO/DIO extension card.*
+
+
+Things that do not seem to work:
+
+- The level meters ("multi track") in 'alsamixer' do not seem to react to signals in (if this is a bug, it would probably be in the existing ICE1724 code).
+
+- Ardour 2.1 seems to work only via JACK, not using ALSA directly or via OSS. This still needs to be tracked down.
+
+
+DRIVER DETAILS:
+
+the following files were added:
+
+pci/ice1724/maya44.c        - Maya44 specific code
+pci/ice1724/maya44.h
+pci/ice1724/ice1724.patch
+pci/ice1724/ice1724.h.patch - PROPOSED patch to ice1724.h (see SAMPLING RATES)
+i2c/other/wm8776.c  - low-level access routines for Wolfson WM8776 codecs 
+include/wm8776.h
+
+
+Note that the wm8776.c code is meant to be card-independent and does not actually register the codec with the ALSA infrastructure.
+This is done in maya44.c, mainly because some of the WM8776 controls are used in Maya44-specific ways, and should be named appropriately.
+
+
+the following files were created in pci/ice1724, simply #including the corresponding file from the alsa-kernel tree:
+
+wtm.h
+vt1720_mobo.h
+revo.h
+prodigy192.h
+pontis.h
+phase.h
+maya44.h
+juli.h
+aureon.h
+amp.h
+envy24ht.h
+se.h
+prodigy_hifi.h
+
+
+*I hope this is the correct way to do things.*
+
+
+SAMPLING RATES:
+
+The Maya44 card (or more exactly, the Wolfson WM8776 codecs) allow a maximum sampling rate of 192 kHz for playback and 92 kHz for capture.
+
+As the ICE1724 chip only allows one global sampling rate, this is handled as follows:
+
+* setting the sampling rate on any open PCM device on the maya44 card will always set the *global* sampling rate for all playback and capture channels.
+
+* In the current state of the driver, setting rates of up to 192 kHz is permitted even for capture devices.
+
+*AVOID CAPTURING AT RATES ABOVE 96kHz*, even though it may appear to work. The codec cannot actually capture at such rates, meaning poor quality.
+
+
+I propose some additional code for limiting the sampling rate when setting on a capture pcm device. However because of the global sampling rate, this logic would be somewhat problematic.
+
+The proposed code (currently deactivated) is in ice1712.h.patch, ice1724.c and maya44.c (in pci/ice1712).
+
+
+SOUND DEVICES:
+
+PCM devices correspond to inputs/outputs as follows (assuming Maya44 is card #0):
+
+hw:0,0 input - stereo, analog input 1+2
+hw:0,0 output - stereo, analog output 1+2
+hw:0,1 input - stereo, analog input 3+4 OR S/PDIF input
+hw:0,1 output - stereo, analog output 3+4 (and SPDIF out)
+
+
+NAMING OF MIXER CONTROLS:
+
+(for more information about the signal flow, please refer to the block diagram on p.24 of the ESI Maya44 manual, or in the ESI windows software).
+
+
+PCM: (digital) output level for channel 1+2
+PCM 1: same for channel 3+4
+
+Mic Phantom+48V: switch for +48V phantom power for electrostatic microphones on input 1/2.
+    Make sure this is not turned on while any other source is connected to input 1/2.
+    It might damage the source and/or the maya44 card.
+
+Mic/Line input: if switch is is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo).
+
+Bypass: analogue bypass from ADC input to output for channel 1+2. Same as "Monitor" in the windows driver.
+Bypass 1: same for channel 3+4.
+
+Crossmix: cross-mixer from channels 1+2 to channels 3+4
+Crossmix 1: cross-mixer from channels 3+4 to channels 1+2
+
+IEC958 Output: switch for S/PDIF output.
+    This is not supported by the ESI windows driver.
+    S/PDIF should output the same signal as channel 3+4. [untested!]
+
+
+Digitial output selectors:
+
+    These switches allow a direct digital routing from the ADCs to the DACs.
+    Each switch determines where the digital input data to one of the DACs comes from.
+    They are not supported by the ESI windows driver.
+    For normal operation, they should all be set to "PCM out".
+
+H/W: Output source channel 1
+H/W 1: Output source channel 2
+H/W 2: Output source channel 3
+H/W 3: Output source channel 4
+
+H/W 4 ... H/W 9: unknown function, left in to enable testing.
+    Possibly some of these control S/PDIF output(s).
+    If these turn out to be unused, they will go away in later driver versions.
+
+Selectable values for each of the digital output selectors are:
+   "PCM out" -> DAC output of the corresponding channel (default setting)
+   "Input 1"...
+   "Input 4" -> direct routing from ADC output of the selected input channel
+
+
+--------
+
+Feb 14, 2008
+Rainer Zimmermann
+mail@lightshed.de
+
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index 9e67632..9ac842b 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -62,6 +62,7 @@
  o Mic        - Mic (and optional Jack)
  o Line       - Line Input/Output (and optional Jack)
  o Speaker    - Speaker
+ o Supply     - Power or clock supply widget used by other widgets.
  o Pre        - Special PRE widget (exec before all others)
  o Post       - Special POST widget (exec after all others)
 
diff --git a/MAINTAINERS b/MAINTAINERS
index f7d64fa..90f8128 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4607,7 +4607,8 @@
 F:	drivers/spi/pxa2xx*
 F:	drivers/usb/gadget/pxa2*
 F:	include/sound/pxa2xx-lib.h
-F:	sound/soc/pxa/pxa2xx*
+F:	sound/arm/pxa*
+F:	sound/soc/pxa
 
 PXA168 SUPPORT
 P:	Eric Miao
@@ -5335,11 +5336,12 @@
 M:	lrg@slimlogic.co.uk
 P:	Mark Brown
 M:	broonie@opensource.wolfsonmicro.com
-T:	git git://opensource.wolfsonmicro.com/linux-2.6-asoc
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
 L:	alsa-devel@alsa-project.org (subscribers-only)
 W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported
 F:	sound/soc/
+F:	include/sound/soc*
 
 SPARC + UltraSPARC (sparc/sparc64)
 P:	David S. Miller
diff --git a/arch/alpha/mm/extable.c b/arch/alpha/mm/extable.c
index 62dc379..813c9b6 100644
--- a/arch/alpha/mm/extable.c
+++ b/arch/alpha/mm/extable.c
@@ -48,6 +48,27 @@
 	     cmp_ex, swap_ex);
 }
 
+#ifdef CONFIG_MODULES
+/*
+ * Any entry referring to the module init will be at the beginning or
+ * the end.
+ */
+void trim_init_extable(struct module *m)
+{
+	/*trim the beginning*/
+	while (m->num_exentries &&
+	       within_module_init(ex_to_addr(&m->extable[0]), m)) {
+		m->extable++;
+		m->num_exentries--;
+	}
+	/*trim the end*/
+	while (m->num_exentries &&
+	       within_module_init(ex_to_addr(&m->extable[m->num_exentries-1]),
+				  m))
+		m->num_exentries--;
+}
+#endif /* CONFIG_MODULES */
+
 const struct exception_table_entry *
 search_extable(const struct exception_table_entry *first,
 	       const struct exception_table_entry *last,
diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
index 1167fe9c..98f94d0 100644
--- a/arch/avr32/kernel/module.c
+++ b/arch/avr32/kernel/module.c
@@ -32,8 +32,6 @@
 	mod->arch.syminfo = NULL;
 
 	vfree(module_region);
-	/* FIXME: if module_region == mod->init_region, trim exception
-	 * table entries. */
 }
 
 static inline int check_rela(Elf32_Rela *rela, struct module *module,
diff --git a/arch/cris/kernel/module.c b/arch/cris/kernel/module.c
index a187833..abc13e3 100644
--- a/arch/cris/kernel/module.c
+++ b/arch/cris/kernel/module.c
@@ -48,8 +48,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	FREE_MODULE(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	   table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/frv/kernel/module.c b/arch/frv/kernel/module.c
index 850d168..711763c 100644
--- a/arch/frv/kernel/module.c
+++ b/arch/frv/kernel/module.c
@@ -35,8 +35,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/h8300/kernel/module.c b/arch/h8300/kernel/module.c
index cfc9127..0865e29 100644
--- a/arch/h8300/kernel/module.c
+++ b/arch/h8300/kernel/module.c
@@ -23,8 +23,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/ia64/mm/extable.c b/arch/ia64/mm/extable.c
index 71c50dd..e95d5ad 100644
--- a/arch/ia64/mm/extable.c
+++ b/arch/ia64/mm/extable.c
@@ -53,6 +53,32 @@
 	     cmp_ex, swap_ex);
 }
 
+static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
+{
+	return (unsigned long)&x->insn + x->insn;
+}
+
+#ifdef CONFIG_MODULES
+/*
+ * Any entry referring to the module init will be at the beginning or
+ * the end.
+ */
+void trim_init_extable(struct module *m)
+{
+	/*trim the beginning*/
+	while (m->num_exentries &&
+	       within_module_init(ex_to_addr(&m->extable[0]), m)) {
+		m->extable++;
+		m->num_exentries--;
+	}
+	/*trim the end*/
+	while (m->num_exentries &&
+	       within_module_init(ex_to_addr(&m->extable[m->num_exentries-1]),
+				  m))
+		m->num_exentries--;
+}
+#endif /* CONFIG_MODULES */
+
 const struct exception_table_entry *
 search_extable (const struct exception_table_entry *first,
 		const struct exception_table_entry *last,
diff --git a/arch/m32r/kernel/module.c b/arch/m32r/kernel/module.c
index 8d42057..cb5f37d 100644
--- a/arch/m32r/kernel/module.c
+++ b/arch/m32r/kernel/module.c
@@ -44,8 +44,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/m68k/kernel/module.c b/arch/m68k/kernel/module.c
index 774862b..cd6bcb1c9 100644
--- a/arch/m68k/kernel/module.c
+++ b/arch/m68k/kernel/module.c
@@ -31,8 +31,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/m68knommu/kernel/module.c b/arch/m68knommu/kernel/module.c
index 3b1a2ff..d11ffae 100644
--- a/arch/m68knommu/kernel/module.c
+++ b/arch/m68knommu/kernel/module.c
@@ -23,8 +23,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 1f60e27..3e9100d 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -68,8 +68,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
index 6b287f2..4fa0e36 100644
--- a/arch/mn10300/kernel/module.c
+++ b/arch/mn10300/kernel/module.c
@@ -48,8 +48,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	 * table entries. */
 }
 
 /*
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index ecd1c50..ef5caf2 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -267,8 +267,6 @@
 	mod->arch.section = NULL;
 
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* Additional bytes needed in front of individual sections */
diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
index a218da6..fb84120 100644
--- a/arch/powerpc/include/asm/mpc52xx_psc.h
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -28,6 +28,10 @@
 #define MPC52xx_PSC_MAXNUM	6
 
 /* Programmable Serial Controller (PSC) status register bits */
+#define MPC52xx_PSC_SR_UNEX_RX	0x0001
+#define MPC52xx_PSC_SR_DATA_VAL	0x0002
+#define MPC52xx_PSC_SR_DATA_OVR	0x0004
+#define MPC52xx_PSC_SR_CMDSEND	0x0008
 #define MPC52xx_PSC_SR_CDE	0x0080
 #define MPC52xx_PSC_SR_RXRDY	0x0100
 #define MPC52xx_PSC_SR_RXFULL	0x0200
@@ -61,6 +65,12 @@
 #define MPC52xx_PSC_RXTX_FIFO_EMPTY	0x0001
 
 /* PSC interrupt status/mask bits */
+#define MPC52xx_PSC_IMR_UNEX_RX_SLOT 0x0001
+#define MPC52xx_PSC_IMR_DATA_VALID	0x0002
+#define MPC52xx_PSC_IMR_DATA_OVR	0x0004
+#define MPC52xx_PSC_IMR_CMD_SEND	0x0008
+#define MPC52xx_PSC_IMR_ERROR		0x0040
+#define MPC52xx_PSC_IMR_DEOF		0x0080
 #define MPC52xx_PSC_IMR_TXRDY		0x0100
 #define MPC52xx_PSC_IMR_RXRDY		0x0200
 #define MPC52xx_PSC_IMR_DB		0x0400
@@ -117,6 +127,7 @@
 #define MPC52xx_PSC_SICR_SIM_FIR		(0x6 << 24)
 #define MPC52xx_PSC_SICR_SIM_CODEC_24		(0x7 << 24)
 #define MPC52xx_PSC_SICR_SIM_CODEC_32		(0xf << 24)
+#define MPC52xx_PSC_SICR_AWR			(1 << 30)
 #define MPC52xx_PSC_SICR_GENCLK			(1 << 23)
 #define MPC52xx_PSC_SICR_I2S			(1 << 22)
 #define MPC52xx_PSC_SICR_CLKPOL			(1 << 21)
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index 43e7e3a..477c663 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -43,8 +43,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index eed4a00..ab2e3ed 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -56,8 +56,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 static void
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index c19b0f7..c2efdcd 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -46,8 +46,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
index 47d5619..8303ac4 100644
--- a/arch/sparc/include/asm/uaccess_32.h
+++ b/arch/sparc/include/asm/uaccess_32.h
@@ -17,6 +17,9 @@
 
 #ifndef __ASSEMBLY__
 
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
+
 /* Sparc is not segmented, however we need to be able to fool access_ok()
  * when doing system calls from kernel mode legitimately.
  *
diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c
index 9027376..0ee642f 100644
--- a/arch/sparc/kernel/module.c
+++ b/arch/sparc/kernel/module.c
@@ -75,8 +75,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* Make generic code ignore STT_REGISTER dummy undefined symbols.  */
diff --git a/arch/sparc/mm/extable.c b/arch/sparc/mm/extable.c
index 16cc289..a61c349 100644
--- a/arch/sparc/mm/extable.c
+++ b/arch/sparc/mm/extable.c
@@ -28,6 +28,10 @@
 	 *	word 3: last insn address + 4 bytes
 	 *	word 4: fixup code address
 	 *
+	 * Deleted entries are encoded as:
+	 *	word 1: unused
+	 *	word 2: -1
+	 *
 	 * See asm/uaccess.h for more details.
 	 */
 
@@ -39,6 +43,10 @@
 			continue;
 		}
 
+		/* A deleted entry; see trim_init_extable */
+		if (walk->fixup == -1)
+			continue;
+
 		if (walk->insn == value)
 			return walk;
 	}
@@ -57,6 +65,27 @@
         return NULL;
 }
 
+#ifdef CONFIG_MODULES
+/* We could memmove them around; easier to mark the trimmed ones. */
+void trim_init_extable(struct module *m)
+{
+	unsigned int i;
+	bool range;
+
+	for (i = 0; i < m->num_exentries; i += range ? 2 : 1) {
+		range = m->extable[i].fixup == 0;
+
+		if (within_module_init(m->extable[i].insn, m)) {
+			m->extable[i].fixup = -1;
+			if (range)
+				m->extable[i+1].fixup = -1;
+		}
+		if (range)
+			i++;
+	}
+}
+#endif /* CONFIG_MODULES */
+
 /* Special extable search, which handles ranges.  Returns fixup */
 unsigned long search_extables_range(unsigned long addr, unsigned long *g2)
 {
diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
index 58da248..9ce3f16 100644
--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -53,16 +53,21 @@
 #else
 # define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
 #endif
+#define MODULES_VADDR	VMALLOC_START
+#define MODULES_END	VMALLOC_END
+#define MODULES_LEN	(MODULES_VADDR - MODULES_END)
 
 #define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-
+#define __PAGE_KERNEL_EXEC                                              \
+	 (_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
 #define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
 #define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED)
 #define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
 #define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
 #define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
+#define PAGE_KERNEL_EXEC	__pgprot(__PAGE_KERNEL_EXEC)
 
 /*
  * The i386 can't do page protection for execute, and considers that the same
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index 598b5c1..1b549bc 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -8,7 +8,7 @@
 
 subarch-obj-y = lib/semaphore_32.o lib/string_32.o
 subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem_32.o
-subarch-obj-$(CONFIG_MODULES) += kernel/module_32.o
+subarch-obj-$(CONFIG_MODULES) += kernel/module.o
 
 USER_OBJS := bugs.o ptrace_user.o fault.o
 
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
index c8b4cce..2201e9c 100644
--- a/arch/um/sys-x86_64/Makefile
+++ b/arch/um/sys-x86_64/Makefile
@@ -8,10 +8,8 @@
 	setjmp.o signal.o stub.o stub_segv.o syscalls.o syscall_table.o \
 	sysrq.o ksyms.o tls.o
 
-obj-$(CONFIG_MODULES) += um_module.o
-
 subarch-obj-y = lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o
-subarch-obj-$(CONFIG_MODULES) += kernel/module_64.o
+subarch-obj-$(CONFIG_MODULES) += kernel/module.o
 
 ldt-y = ../sys-i386/ldt.o
 
diff --git a/arch/um/sys-x86_64/um_module.c b/arch/um/sys-x86_64/um_module.c
deleted file mode 100644
index 3dead39..0000000
--- a/arch/um/sys-x86_64/um_module.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <linux/vmalloc.h>
-#include <linux/moduleloader.h>
-
-/* Copied from i386 arch/i386/kernel/module.c */
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc_exec(size);
-}
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/*
-	 * FIXME: If module_region == mod->init_region, trim exception
-	 * table entries.
-	 */
-}
-
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 1caf576..313389c 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -17,8 +17,13 @@
 /* Pages for switcher itself, then two pages per cpu */
 #define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids)
 
-/* We map at -4M for ease of mapping into the guest (one PTE page). */
+/* We map at -4M (-2M when PAE is activated) for ease of mapping
+ * into the guest (one PTE page). */
+#ifdef CONFIG_X86_PAE
+#define SWITCHER_ADDR 0xFFE00000
+#else
 #define SWITCHER_ADDR 0xFFC00000
+#endif
 
 /* Found in switcher.S */
 extern unsigned long default_idt_entries[];
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index faae199..d31c4a6 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -12,11 +12,13 @@
 #define LHCALL_TS		8
 #define LHCALL_SET_CLOCKEVENT	9
 #define LHCALL_HALT		10
+#define LHCALL_SET_PMD		13
 #define LHCALL_SET_PTE		14
-#define LHCALL_SET_PMD		15
+#define LHCALL_SET_PGD		15
 #define LHCALL_LOAD_TLS		16
 #define LHCALL_NOTIFY		17
 #define LHCALL_LOAD_GDT_ENTRY	18
+#define LHCALL_SEND_INTERRUPTS	19
 
 #define LGUEST_TRAP_ENTRY 0x1F
 
@@ -32,10 +34,10 @@
  * operations?  There are two ways: the direct way is to make a "hypercall",
  * to make requests of the Host Itself.
  *
- * We use the KVM hypercall mechanism. Eighteen hypercalls are
+ * We use the KVM hypercall mechanism. Seventeen hypercalls are
  * available: the hypercall number is put in the %eax register, and the
- * arguments (when required) are placed in %ebx, %ecx and %edx.  If a return
- * value makes sense, it's returned in %eax.
+ * arguments (when required) are placed in %ebx, %ecx, %edx and %esi.
+ * If a return value makes sense, it's returned in %eax.
  *
  * Grossly invalid calls result in Sudden Death at the hands of the vengeful
  * Host, rather than returning failure.  This reflects Winston Churchill's
@@ -47,8 +49,9 @@
 
 #define LHCALL_RING_SIZE 64
 struct hcall_args {
-	/* These map directly onto eax, ebx, ecx, edx in struct lguest_regs */
-	unsigned long arg0, arg1, arg2, arg3;
+	/* These map directly onto eax, ebx, ecx, edx and esi
+	 * in struct lguest_regs */
+	unsigned long arg0, arg1, arg2, arg3, arg4;
 };
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
index 2733fad..5e67c15 100644
--- a/arch/x86/include/asm/pgtable_32_types.h
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -46,6 +46,10 @@
 # define VMALLOC_END	(FIXADDR_START - 2 * PAGE_SIZE)
 #endif
 
+#define MODULES_VADDR	VMALLOC_START
+#define MODULES_END	VMALLOC_END
+#define MODULES_LEN	(MODULES_VADDR - MODULES_END)
+
 #define MAXMEM	(VMALLOC_END - PAGE_OFFSET - __VMALLOC_RESERVE)
 
 #endif /* _ASM_X86_PGTABLE_32_DEFS_H */
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index a5ecc9c..7f3eba0 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -172,6 +172,6 @@
 	flush_tlb_all();
 }
 
-extern void zap_low_mappings(void);
+extern void zap_low_mappings(bool early);
 
 #endif /* _ASM_X86_TLBFLUSH_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 4f78bd6..f3477bb 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -73,7 +73,7 @@
 obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
-obj-$(CONFIG_MODULES)		+= module_$(BITS).o
+obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_EFI) 		+= efi.o efi_$(BITS).o efi_stub_$(BITS).o
 obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index 1a830cb..dfdbf64 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -126,6 +126,7 @@
 #if defined(CONFIG_LGUEST) || defined(CONFIG_LGUEST_GUEST) || defined(CONFIG_LGUEST_MODULE)
 	BLANK();
 	OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled);
+	OFFSET(LGUEST_DATA_irq_pending, lguest_data, irq_pending);
 	OFFSET(LGUEST_DATA_pgdir, lguest_data, pgdir);
 
 	BLANK();
diff --git a/arch/x86/kernel/module_64.c b/arch/x86/kernel/module.c
similarity index 74%
rename from arch/x86/kernel/module_64.c
rename to arch/x86/kernel/module.c
index c23880b..89f386f 100644
--- a/arch/x86/kernel/module_64.c
+++ b/arch/x86/kernel/module.c
@@ -1,6 +1,5 @@
-/*  Kernel module help for x86-64
+/*  Kernel module help for x86.
     Copyright (C) 2001 Rusty Russell.
-    Copyright (C) 2002,2003 Andi Kleen, SuSE Labs.
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -22,23 +21,18 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/bug.h>
+#include <linux/mm.h>
 
 #include <asm/system.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 
+#if 0
+#define DEBUGP printk
+#else
 #define DEBUGP(fmt...)
-
-#ifndef CONFIG_UML
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	   table entries. */
-}
+#endif
 
 void *module_alloc(unsigned long size)
 {
@@ -54,9 +48,15 @@
 	if (!area)
 		return NULL;
 
-	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL_EXEC);
+	return __vmalloc_area(area, GFP_KERNEL | __GFP_HIGHMEM,
+					PAGE_KERNEL_EXEC);
 }
-#endif
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+}
 
 /* We don't need anything special. */
 int module_frob_arch_sections(Elf_Ehdr *hdr,
@@ -67,6 +67,58 @@
 	return 0;
 }
 
+#ifdef CONFIG_X86_32
+int apply_relocate(Elf32_Shdr *sechdrs,
+		   const char *strtab,
+		   unsigned int symindex,
+		   unsigned int relsec,
+		   struct module *me)
+{
+	unsigned int i;
+	Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	uint32_t *location;
+
+	DEBUGP("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to.  Note that all
+		   undefined symbols have been resolved.  */
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+			+ ELF32_R_SYM(rel[i].r_info);
+
+		switch (ELF32_R_TYPE(rel[i].r_info)) {
+		case R_386_32:
+			/* We add the value into the location given */
+			*location += sym->st_value;
+			break;
+		case R_386_PC32:
+			/* Add the value, subtract its postition */
+			*location += sym->st_value - (uint32_t)location;
+			break;
+		default:
+			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+			       me->name, ELF32_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *me)
+{
+	printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
+	       me->name);
+	return -ENOEXEC;
+}
+#else /*X86_64*/
 int apply_relocate_add(Elf64_Shdr *sechdrs,
 		   const char *strtab,
 		   unsigned int symindex,
@@ -147,6 +199,8 @@
 	return -ENOSYS;
 }
 
+#endif
+
 int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
diff --git a/arch/x86/kernel/module_32.c b/arch/x86/kernel/module_32.c
deleted file mode 100644
index 0edd819..0000000
--- a/arch/x86/kernel/module_32.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*  Kernel module help for i386.
-    Copyright (C) 2001 Rusty Russell.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/bug.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt...)
-#endif
-
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc_exec(size);
-}
-
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	   table entries. */
-}
-
-/* We don't need anything special. */
-int module_frob_arch_sections(Elf_Ehdr *hdr,
-			      Elf_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *mod)
-{
-	return 0;
-}
-
-int apply_relocate(Elf32_Shdr *sechdrs,
-		   const char *strtab,
-		   unsigned int symindex,
-		   unsigned int relsec,
-		   struct module *me)
-{
-	unsigned int i;
-	Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr;
-	Elf32_Sym *sym;
-	uint32_t *location;
-
-	DEBUGP("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			+ rel[i].r_offset;
-		/* This is the symbol it is referring to.  Note that all
-		   undefined symbols have been resolved.  */
-		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
-			+ ELF32_R_SYM(rel[i].r_info);
-
-		switch (ELF32_R_TYPE(rel[i].r_info)) {
-		case R_386_32:
-			/* We add the value into the location given */
-			*location += sym->st_value;
-			break;
-		case R_386_PC32:
-			/* Add the value, subtract its postition */
-			*location += sym->st_value - (uint32_t)location;
-			break;
-		default:
-			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
-			       me->name, ELF32_R_TYPE(rel[i].r_info));
-			return -ENOEXEC;
-		}
-	}
-	return 0;
-}
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
-		       const char *strtab,
-		       unsigned int symindex,
-		       unsigned int relsec,
-		       struct module *me)
-{
-	printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
-	       me->name);
-	return -ENOEXEC;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
-		    const Elf_Shdr *sechdrs,
-		    struct module *me)
-{
-	const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL,
-		*para = NULL;
-	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-
-	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
-		if (!strcmp(".text", secstrings + s->sh_name))
-			text = s;
-		if (!strcmp(".altinstructions", secstrings + s->sh_name))
-			alt = s;
-		if (!strcmp(".smp_locks", secstrings + s->sh_name))
-			locks = s;
-		if (!strcmp(".parainstructions", secstrings + s->sh_name))
-			para = s;
-	}
-
-	if (alt) {
-		/* patch .altinstructions */
-		void *aseg = (void *)alt->sh_addr;
-		apply_alternatives(aseg, aseg + alt->sh_size);
-	}
-	if (locks && text) {
-		void *lseg = (void *)locks->sh_addr;
-		void *tseg = (void *)text->sh_addr;
-		alternatives_smp_module_add(me, me->name,
-					    lseg, lseg + locks->sh_size,
-					    tseg, tseg + text->sh_size);
-	}
-
-	if (para) {
-		void *pseg = (void *)para->sh_addr;
-		apply_paravirt(pseg, pseg + para->sh_size);
-	}
-
-	return module_bug_finalize(hdr, sechdrs, me);
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-	alternatives_smp_module_del(mod);
-	module_bug_cleanup(mod);
-}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d1c636b..be5ae80 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -301,15 +301,13 @@
 
 #ifdef CONFIG_BLK_DEV_INITRD
 
-#ifdef CONFIG_X86_32
-
 #define MAX_MAP_CHUNK	(NR_FIX_BTMAPS << PAGE_SHIFT)
 static void __init relocate_initrd(void)
 {
 
 	u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 	u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
-	u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+	u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
 	u64 ramdisk_here;
 	unsigned long slop, clen, mapaddr;
 	char *p, *q;
@@ -365,14 +363,13 @@
 		ramdisk_image, ramdisk_image + ramdisk_size - 1,
 		ramdisk_here, ramdisk_here + ramdisk_size - 1);
 }
-#endif
 
 static void __init reserve_initrd(void)
 {
 	u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 	u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
 	u64 ramdisk_end   = ramdisk_image + ramdisk_size;
-	u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+	u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
 
 	if (!boot_params.hdr.type_of_loader ||
 	    !ramdisk_image || !ramdisk_size)
@@ -402,14 +399,8 @@
 		return;
 	}
 
-#ifdef CONFIG_X86_32
 	relocate_initrd();
-#else
-	printk(KERN_ERR "initrd extends beyond end of memory "
-	       "(0x%08llx > 0x%08llx)\ndisabling initrd\n",
-	       ramdisk_end, end_of_lowmem);
-	initrd_start = 0;
-#endif
+
 	free_early(ramdisk_image, ramdisk_end);
 }
 #else
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 7c80007..2fecda6 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -873,7 +873,7 @@
 
 	err = do_boot_cpu(apicid, cpu);
 
-	zap_low_mappings();
+	zap_low_mappings(false);
 	low_mappings = 0;
 #else
 	err = do_boot_cpu(apicid, cpu);
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 4c85b2e..367e878 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -108,6 +108,8 @@
 	/* Data */
 	. = ALIGN(PAGE_SIZE);
 	.data : AT(ADDR(.data) - LOAD_OFFSET) {
+		/* Start of data section */
+		_sdata = .;
 		DATA_DATA
 		CONSTRUCTORS
 
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index 8dab8f7..3871804 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -2,7 +2,6 @@
 	bool "Lguest guest support"
 	select PARAVIRT
 	depends on X86_32
-	depends on !X86_PAE
 	select VIRTIO
 	select VIRTIO_RING
 	select VIRTIO_CONSOLE
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 4e0c265..7bc65f0 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -87,7 +87,7 @@
 
 /*G:037 async_hcall() is pretty simple: I'm quite proud of it really.  We have a
  * ring buffer of stored hypercalls which the Host will run though next time we
- * do a normal hypercall.  Each entry in the ring has 4 slots for the hypercall
+ * do a normal hypercall.  Each entry in the ring has 5 slots for the hypercall
  * arguments, and a "hcall_status" word which is 0 if the call is ready to go,
  * and 255 once the Host has finished with it.
  *
@@ -96,7 +96,8 @@
  * effect of causing the Host to run all the stored calls in the ring buffer
  * which empties it for next time! */
 static void async_hcall(unsigned long call, unsigned long arg1,
-			unsigned long arg2, unsigned long arg3)
+			unsigned long arg2, unsigned long arg3,
+			unsigned long arg4)
 {
 	/* Note: This code assumes we're uniprocessor. */
 	static unsigned int next_call;
@@ -108,12 +109,13 @@
 	local_irq_save(flags);
 	if (lguest_data.hcall_status[next_call] != 0xFF) {
 		/* Table full, so do normal hcall which will flush table. */
-		kvm_hypercall3(call, arg1, arg2, arg3);
+		kvm_hypercall4(call, arg1, arg2, arg3, arg4);
 	} else {
 		lguest_data.hcalls[next_call].arg0 = call;
 		lguest_data.hcalls[next_call].arg1 = arg1;
 		lguest_data.hcalls[next_call].arg2 = arg2;
 		lguest_data.hcalls[next_call].arg3 = arg3;
+		lguest_data.hcalls[next_call].arg4 = arg4;
 		/* Arguments must all be written before we mark it to go */
 		wmb();
 		lguest_data.hcall_status[next_call] = 0;
@@ -141,7 +143,7 @@
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
 		kvm_hypercall1(call, arg1);
 	else
-		async_hcall(call, arg1, 0, 0);
+		async_hcall(call, arg1, 0, 0, 0);
 }
 
 static void lazy_hcall2(unsigned long call,
@@ -151,7 +153,7 @@
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
 		kvm_hypercall2(call, arg1, arg2);
 	else
-		async_hcall(call, arg1, arg2, 0);
+		async_hcall(call, arg1, arg2, 0, 0);
 }
 
 static void lazy_hcall3(unsigned long call,
@@ -162,9 +164,23 @@
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
 		kvm_hypercall3(call, arg1, arg2, arg3);
 	else
-		async_hcall(call, arg1, arg2, arg3);
+		async_hcall(call, arg1, arg2, arg3, 0);
 }
 
+#ifdef CONFIG_X86_PAE
+static void lazy_hcall4(unsigned long call,
+		       unsigned long arg1,
+		       unsigned long arg2,
+		       unsigned long arg3,
+		       unsigned long arg4)
+{
+	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
+		kvm_hypercall4(call, arg1, arg2, arg3, arg4);
+	else
+		async_hcall(call, arg1, arg2, arg3, arg4);
+}
+#endif
+
 /* When lazy mode is turned off reset the per-cpu lazy mode variable and then
  * issue the do-nothing hypercall to flush any stored calls. */
 static void lguest_leave_lazy_mmu_mode(void)
@@ -179,7 +195,7 @@
 	paravirt_end_context_switch(next);
 }
 
-/*G:033
+/*G:032
  * After that diversion we return to our first native-instruction
  * replacements: four functions for interrupt control.
  *
@@ -199,30 +215,28 @@
 {
 	return lguest_data.irq_enabled;
 }
-PV_CALLEE_SAVE_REGS_THUNK(save_fl);
-
-/* restore_flags() just sets the flags back to the value given. */
-static void restore_fl(unsigned long flags)
-{
-	lguest_data.irq_enabled = flags;
-}
-PV_CALLEE_SAVE_REGS_THUNK(restore_fl);
 
 /* Interrupts go off... */
 static void irq_disable(void)
 {
 	lguest_data.irq_enabled = 0;
 }
+
+/* Let's pause a moment.  Remember how I said these are called so often?
+ * Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to
+ * break some rules.  In particular, these functions are assumed to save their
+ * own registers if they need to: normal C functions assume they can trash the
+ * eax register.  To use normal C functions, we use
+ * PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the
+ * C function, then restores it. */
+PV_CALLEE_SAVE_REGS_THUNK(save_fl);
 PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
-
-/* Interrupts go on... */
-static void irq_enable(void)
-{
-	lguest_data.irq_enabled = X86_EFLAGS_IF;
-}
-PV_CALLEE_SAVE_REGS_THUNK(irq_enable);
-
 /*:*/
+
+/* These are in i386_head.S */
+extern void lg_irq_enable(void);
+extern void lg_restore_fl(unsigned long flags);
+
 /*M:003 Note that we don't check for outstanding interrupts when we re-enable
  * them (or when we unmask an interrupt).  This seems to work for the moment,
  * since interrupts are rare and we'll just get the interrupt on the next timer
@@ -368,8 +382,8 @@
 	case 1:	/* Basic feature request. */
 		/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
 		*cx &= 0x00002201;
-		/* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU. */
-		*dx &= 0x07808111;
+		/* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
+		*dx &= 0x07808151;
 		/* The Host can do a nice optimization if it knows that the
 		 * kernel mappings (addresses above 0xC0000000 or whatever
 		 * PAGE_OFFSET is set to) haven't changed.  But Linux calls
@@ -388,6 +402,11 @@
 		if (*ax > 0x80000008)
 			*ax = 0x80000008;
 		break;
+	case 0x80000001:
+		/* Here we should fix nx cap depending on host. */
+		/* For this version of PAE, we just clear NX bit. */
+		*dx &= ~(1 << 20);
+		break;
 	}
 }
 
@@ -521,25 +540,52 @@
 static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
 			       pte_t *ptep)
 {
+#ifdef CONFIG_X86_PAE
+	lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr,
+		    ptep->pte_low, ptep->pte_high);
+#else
 	lazy_hcall3(LHCALL_SET_PTE, __pa(mm->pgd), addr, ptep->pte_low);
+#endif
 }
 
 static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pteval)
 {
-	*ptep = pteval;
+	native_set_pte(ptep, pteval);
 	lguest_pte_update(mm, addr, ptep);
 }
 
-/* The Guest calls this to set a top-level entry.  Again, we set the entry then
- * tell the Host which top-level page we changed, and the index of the entry we
- * changed. */
+/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
+ * to set a middle-level entry when PAE is activated.
+ * Again, we set the entry then tell the Host which page we changed,
+ * and the index of the entry we changed. */
+#ifdef CONFIG_X86_PAE
+static void lguest_set_pud(pud_t *pudp, pud_t pudval)
+{
+	native_set_pud(pudp, pudval);
+
+	/* 32 bytes aligned pdpt address and the index. */
+	lazy_hcall2(LHCALL_SET_PGD, __pa(pudp) & 0xFFFFFFE0,
+		   (__pa(pudp) & 0x1F) / sizeof(pud_t));
+}
+
 static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 {
-	*pmdp = pmdval;
+	native_set_pmd(pmdp, pmdval);
 	lazy_hcall2(LHCALL_SET_PMD, __pa(pmdp) & PAGE_MASK,
-		   (__pa(pmdp) & (PAGE_SIZE - 1)) / 4);
+		   (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t));
 }
+#else
+
+/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not
+ * activated. */
+static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
+{
+	native_set_pmd(pmdp, pmdval);
+	lazy_hcall2(LHCALL_SET_PGD, __pa(pmdp) & PAGE_MASK,
+		   (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t));
+}
+#endif
 
 /* There are a couple of legacy places where the kernel sets a PTE, but we
  * don't know the top level any more.  This is useless for us, since we don't
@@ -552,11 +598,31 @@
  * which brings boot back to 0.25 seconds. */
 static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 {
-	*ptep = pteval;
+	native_set_pte(ptep, pteval);
 	if (cr3_changed)
 		lazy_hcall1(LHCALL_FLUSH_TLB, 1);
 }
 
+#ifdef CONFIG_X86_PAE
+static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	native_set_pte_atomic(ptep, pte);
+	if (cr3_changed)
+		lazy_hcall1(LHCALL_FLUSH_TLB, 1);
+}
+
+void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	native_pte_clear(mm, addr, ptep);
+	lguest_pte_update(mm, addr, ptep);
+}
+
+void lguest_pmd_clear(pmd_t *pmdp)
+{
+	lguest_set_pmd(pmdp, __pmd(0));
+}
+#endif
+
 /* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
  * native page table operations.  On native hardware you can set a new page
  * table entry whenever you want, but if you want to remove one you have to do
@@ -628,13 +694,12 @@
 {
 	unsigned int i;
 
-	for (i = 0; i < LGUEST_IRQS; i++) {
-		int vector = FIRST_EXTERNAL_VECTOR + i;
+	for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
 		/* Some systems map "vectors" to interrupts weirdly.  Lguest has
 		 * a straightforward 1 to 1 mapping, so force that here. */
-		__get_cpu_var(vector_irq)[vector] = i;
-		if (vector != SYSCALL_VECTOR)
-			set_intr_gate(vector, interrupt[i]);
+		__get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR;
+		if (i != SYSCALL_VECTOR)
+			set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
 	}
 	/* This call is required to set up for 4k stacks, where we have
 	 * separate stacks for hard and soft interrupts. */
@@ -973,10 +1038,10 @@
  *
  * Our current solution is to allow the paravirt back end to optionally patch
  * over the indirect calls to replace them with something more efficient.  We
- * patch the four most commonly called functions: disable interrupts, enable
- * interrupts, restore interrupts and save interrupts.  We usually have 6 or 10
- * bytes to patch into: the Guest versions of these operations are small enough
- * that we can fit comfortably.
+ * patch two of the simplest of the most commonly called functions: disable
+ * interrupts and save interrupts.  We usually have 6 or 10 bytes to patch
+ * into: the Guest versions of these operations are small enough that we can
+ * fit comfortably.
  *
  * First we need assembly templates of each of the patchable Guest operations,
  * and these are in i386_head.S. */
@@ -987,8 +1052,6 @@
 	const char *start, *end;
 } lguest_insns[] = {
 	[PARAVIRT_PATCH(pv_irq_ops.irq_disable)] = { lgstart_cli, lgend_cli },
-	[PARAVIRT_PATCH(pv_irq_ops.irq_enable)] = { lgstart_sti, lgend_sti },
-	[PARAVIRT_PATCH(pv_irq_ops.restore_fl)] = { lgstart_popf, lgend_popf },
 	[PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
 };
 
@@ -1026,6 +1089,7 @@
 	pv_info.name = "lguest";
 	pv_info.paravirt_enabled = 1;
 	pv_info.kernel_rpl = 1;
+	pv_info.shared_kernel_pmd = 1;
 
 	/* We set up all the lguest overrides for sensitive operations.  These
 	 * are detailed with the operations themselves. */
@@ -1033,9 +1097,9 @@
 	/* interrupt-related operations */
 	pv_irq_ops.init_IRQ = lguest_init_IRQ;
 	pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
-	pv_irq_ops.restore_fl = PV_CALLEE_SAVE(restore_fl);
+	pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
 	pv_irq_ops.irq_disable = PV_CALLEE_SAVE(irq_disable);
-	pv_irq_ops.irq_enable = PV_CALLEE_SAVE(irq_enable);
+	pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable);
 	pv_irq_ops.safe_halt = lguest_safe_halt;
 
 	/* init-time operations */
@@ -1071,6 +1135,12 @@
 	pv_mmu_ops.set_pte = lguest_set_pte;
 	pv_mmu_ops.set_pte_at = lguest_set_pte_at;
 	pv_mmu_ops.set_pmd = lguest_set_pmd;
+#ifdef CONFIG_X86_PAE
+	pv_mmu_ops.set_pte_atomic = lguest_set_pte_atomic;
+	pv_mmu_ops.pte_clear = lguest_pte_clear;
+	pv_mmu_ops.pmd_clear = lguest_pmd_clear;
+	pv_mmu_ops.set_pud = lguest_set_pud;
+#endif
 	pv_mmu_ops.read_cr2 = lguest_read_cr2;
 	pv_mmu_ops.read_cr3 = lguest_read_cr3;
 	pv_mmu_ops.lazy_mode.enter = paravirt_enter_lazy_mmu;
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index f795419..a9c8cfe 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -46,10 +46,64 @@
 	.globl lgstart_##name; .globl lgend_##name
 
 LGUEST_PATCH(cli, movl $0, lguest_data+LGUEST_DATA_irq_enabled)
-LGUEST_PATCH(sti, movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled)
-LGUEST_PATCH(popf, movl %eax, lguest_data+LGUEST_DATA_irq_enabled)
 LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax)
-/*:*/
+
+/*G:033 But using those wrappers is inefficient (we'll see why that doesn't
+ * matter for save_fl and irq_disable later).  If we write our routines
+ * carefully in assembler, we can avoid clobbering any registers and avoid
+ * jumping through the wrapper functions.
+ *
+ * I skipped over our first piece of assembler, but this one is worth studying
+ * in a bit more detail so I'll describe in easy stages.  First, the routine
+ * to enable interrupts: */
+ENTRY(lg_irq_enable)
+	/* The reverse of irq_disable, this sets lguest_data.irq_enabled to
+	 * X86_EFLAGS_IF (ie. "Interrupts enabled"). */
+	movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled
+	/* But now we need to check if the Host wants to know: there might have
+	 * been interrupts waiting to be delivered, in which case it will have
+	 * set lguest_data.irq_pending to X86_EFLAGS_IF.  If it's not zero, we
+	 * jump to send_interrupts, otherwise we're done. */
+	testl $0, lguest_data+LGUEST_DATA_irq_pending
+	jnz send_interrupts
+	/* One cool thing about x86 is that you can do many things without using
+	 * a register.  In this case, the normal path hasn't needed to save or
+	 * restore any registers at all! */
+	ret
+send_interrupts:
+	/* OK, now we need a register: eax is used for the hypercall number,
+	 * which is LHCALL_SEND_INTERRUPTS.
+	 *
+	 * We used not to bother with this pending detection at all, which was
+	 * much simpler.  Sooner or later the Host would realize it had to
+	 * send us an interrupt.  But that turns out to make performance 7
+	 * times worse on a simple tcp benchmark.  So now we do this the hard
+	 * way. */
+	pushl %eax
+	movl $LHCALL_SEND_INTERRUPTS, %eax
+	/* This is a vmcall instruction (same thing that KVM uses).  Older
+	 * assembler versions might not know the "vmcall" instruction, so we
+	 * create one manually here. */
+	.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
+	popl %eax
+	ret
+
+/* Finally, the "popf" or "restore flags" routine.  The %eax register holds the
+ * flags (in practice, either X86_EFLAGS_IF or 0): if it's X86_EFLAGS_IF we're
+ * enabling interrupts again, if it's 0 we're leaving them off. */
+ENTRY(lg_restore_fl)
+	/* This is just "lguest_data.irq_enabled = flags;" */
+	movl %eax, lguest_data+LGUEST_DATA_irq_enabled
+	/* Now, if the %eax value has enabled interrupts and
+	 * lguest_data.irq_pending is set, we want to tell the Host so it can
+	 * deliver any outstanding interrupts.  Fortunately, both values will
+	 * be X86_EFLAGS_IF (ie. 512) in that case, and the "testl"
+	 * instruction will AND them together for us.  If both are set, we
+	 * jump to send_interrupts. */
+	testl lguest_data+LGUEST_DATA_irq_pending, %eax
+	jnz send_interrupts
+	/* Again, the normal path has used no extra registers.  Clever, huh? */
+	ret
 
 /* These demark the EIP range where host should never deliver interrupts. */
 .global lguest_noirq_start
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 949708d..9ff3c08 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -564,7 +564,7 @@
 }
 #endif /* !CONFIG_ACPI_SLEEP */
 
-void zap_low_mappings(void)
+void zap_low_mappings(bool early)
 {
 	int i;
 
@@ -581,7 +581,11 @@
 		set_pgd(swapper_pg_dir+i, __pgd(0));
 #endif
 	}
-	flush_tlb_all();
+
+	if (early)
+		__flush_tlb();
+	else
+		flush_tlb_all();
 }
 
 pteval_t __supported_pte_mask __read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL | _PAGE_IOMAP);
@@ -956,7 +960,7 @@
 		test_wp_bit();
 
 	save_pg_dir();
-	zap_low_mappings();
+	zap_low_mappings(true);
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
diff --git a/arch/xtensa/kernel/module.c b/arch/xtensa/kernel/module.c
index 3981a46..c1accea 100644
--- a/arch/xtensa/kernel/module.c
+++ b/arch/xtensa/kernel/module.c
@@ -34,8 +34,6 @@
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	   table entries. */
 }
 
 int module_frob_arch_sections(Elf32_Ehdr *hdr,
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index d3a59c68..8a267c4 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -17,7 +17,7 @@
 #include <linux/bitops.h>
 #include <linux/mutex.h>
 #include <linux/kthread.h>
-
+#include <linux/highmem.h>
 #include <linux/firmware.h>
 #include "base.h"
 
@@ -45,7 +45,10 @@
 	struct bin_attribute attr_data;
 	struct firmware *fw;
 	unsigned long status;
-	int alloc_size;
+	struct page **pages;
+	int nr_pages;
+	int page_array_size;
+	const char *vdata;
 	struct timer_list timeout;
 };
 
@@ -122,6 +125,10 @@
 	return sprintf(buf, "%d\n", loading);
 }
 
+/* Some architectures don't have PAGE_KERNEL_RO */
+#ifndef PAGE_KERNEL_RO
+#define PAGE_KERNEL_RO PAGE_KERNEL
+#endif
 /**
  * firmware_loading_store - set value in the 'loading' control file
  * @dev: device pointer
@@ -141,6 +148,7 @@
 {
 	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
 	int loading = simple_strtol(buf, NULL, 10);
+	int i;
 
 	switch (loading) {
 	case 1:
@@ -151,13 +159,30 @@
 		}
 		vfree(fw_priv->fw->data);
 		fw_priv->fw->data = NULL;
+		for (i = 0; i < fw_priv->nr_pages; i++)
+			__free_page(fw_priv->pages[i]);
+		kfree(fw_priv->pages);
+		fw_priv->pages = NULL;
+		fw_priv->page_array_size = 0;
+		fw_priv->nr_pages = 0;
 		fw_priv->fw->size = 0;
-		fw_priv->alloc_size = 0;
 		set_bit(FW_STATUS_LOADING, &fw_priv->status);
 		mutex_unlock(&fw_lock);
 		break;
 	case 0:
 		if (test_bit(FW_STATUS_LOADING, &fw_priv->status)) {
+			vfree(fw_priv->fw->data);
+			fw_priv->fw->data = vmap(fw_priv->pages,
+						 fw_priv->nr_pages,
+						 0, PAGE_KERNEL_RO);
+			if (!fw_priv->fw->data) {
+				dev_err(dev, "%s: vmap() failed\n", __func__);
+				goto err;
+			}
+			/* Pages will be freed by vfree() */
+			fw_priv->pages = NULL;
+			fw_priv->page_array_size = 0;
+			fw_priv->nr_pages = 0;
 			complete(&fw_priv->completion);
 			clear_bit(FW_STATUS_LOADING, &fw_priv->status);
 			break;
@@ -167,6 +192,7 @@
 		dev_err(dev, "%s: unexpected value (%d)\n", __func__, loading);
 		/* fallthrough */
 	case -1:
+	err:
 		fw_load_abort(fw_priv);
 		break;
 	}
@@ -191,8 +217,28 @@
 		ret_count = -ENODEV;
 		goto out;
 	}
-	ret_count = memory_read_from_buffer(buffer, count, &offset,
-						fw->data, fw->size);
+	if (offset > fw->size)
+		return 0;
+	if (count > fw->size - offset)
+		count = fw->size - offset;
+
+	ret_count = count;
+
+	while (count) {
+		void *page_data;
+		int page_nr = offset >> PAGE_SHIFT;
+		int page_ofs = offset & (PAGE_SIZE-1);
+		int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count);
+
+		page_data = kmap(fw_priv->pages[page_nr]);
+
+		memcpy(buffer, page_data + page_ofs, page_cnt);
+
+		kunmap(fw_priv->pages[page_nr]);
+		buffer += page_cnt;
+		offset += page_cnt;
+		count -= page_cnt;
+	}
 out:
 	mutex_unlock(&fw_lock);
 	return ret_count;
@@ -201,27 +247,39 @@
 static int
 fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size)
 {
-	u8 *new_data;
-	int new_size = fw_priv->alloc_size;
+	int pages_needed = ALIGN(min_size, PAGE_SIZE) >> PAGE_SHIFT;
 
-	if (min_size <= fw_priv->alloc_size)
-		return 0;
+	/* If the array of pages is too small, grow it... */
+	if (fw_priv->page_array_size < pages_needed) {
+		int new_array_size = max(pages_needed,
+					 fw_priv->page_array_size * 2);
+		struct page **new_pages;
 
-	new_size = ALIGN(min_size, PAGE_SIZE);
-	new_data = vmalloc(new_size);
-	if (!new_data) {
-		printk(KERN_ERR "%s: unable to alloc buffer\n", __func__);
-		/* Make sure that we don't keep incomplete data */
-		fw_load_abort(fw_priv);
-		return -ENOMEM;
+		new_pages = kmalloc(new_array_size * sizeof(void *),
+				    GFP_KERNEL);
+		if (!new_pages) {
+			fw_load_abort(fw_priv);
+			return -ENOMEM;
+		}
+		memcpy(new_pages, fw_priv->pages,
+		       fw_priv->page_array_size * sizeof(void *));
+		memset(&new_pages[fw_priv->page_array_size], 0, sizeof(void *) *
+		       (new_array_size - fw_priv->page_array_size));
+		kfree(fw_priv->pages);
+		fw_priv->pages = new_pages;
+		fw_priv->page_array_size = new_array_size;
 	}
-	fw_priv->alloc_size = new_size;
-	if (fw_priv->fw->data) {
-		memcpy(new_data, fw_priv->fw->data, fw_priv->fw->size);
-		vfree(fw_priv->fw->data);
+
+	while (fw_priv->nr_pages < pages_needed) {
+		fw_priv->pages[fw_priv->nr_pages] =
+			alloc_page(GFP_KERNEL | __GFP_HIGHMEM);
+
+		if (!fw_priv->pages[fw_priv->nr_pages]) {
+			fw_load_abort(fw_priv);
+			return -ENOMEM;
+		}
+		fw_priv->nr_pages++;
 	}
-	fw_priv->fw->data = new_data;
-	BUG_ON(min_size > fw_priv->alloc_size);
 	return 0;
 }
 
@@ -258,10 +316,25 @@
 	if (retval)
 		goto out;
 
-	memcpy((u8 *)fw->data + offset, buffer, count);
-
-	fw->size = max_t(size_t, offset + count, fw->size);
 	retval = count;
+
+	while (count) {
+		void *page_data;
+		int page_nr = offset >> PAGE_SHIFT;
+		int page_ofs = offset & (PAGE_SIZE - 1);
+		int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count);
+
+		page_data = kmap(fw_priv->pages[page_nr]);
+
+		memcpy(page_data + page_ofs, buffer, page_cnt);
+
+		kunmap(fw_priv->pages[page_nr]);
+		buffer += page_cnt;
+		offset += page_cnt;
+		count -= page_cnt;
+	}
+
+	fw->size = max_t(size_t, offset, fw->size);
 out:
 	mutex_unlock(&fw_lock);
 	return retval;
@@ -277,7 +350,11 @@
 static void fw_dev_release(struct device *dev)
 {
 	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
+	int i;
 
+	for (i = 0; i < fw_priv->nr_pages; i++)
+		__free_page(fw_priv->pages[i]);
+	kfree(fw_priv->pages);
 	kfree(fw_priv);
 	kfree(dev);
 
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index c0facaa..43db3ea 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -254,7 +254,7 @@
 	return index << PART_BITS;
 }
 
-static int virtblk_probe(struct virtio_device *vdev)
+static int __devinit virtblk_probe(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk;
 	int err;
@@ -288,7 +288,7 @@
 	sg_init_table(vblk->sg, vblk->sg_elems);
 
 	/* We expect one virtqueue, for output. */
-	vblk->vq = vdev->config->find_vq(vdev, 0, blk_done);
+	vblk->vq = virtio_find_single_vq(vdev, blk_done, "requests");
 	if (IS_ERR(vblk->vq)) {
 		err = PTR_ERR(vblk->vq);
 		goto out_free_vblk;
@@ -388,14 +388,14 @@
 out_mempool:
 	mempool_destroy(vblk->pool);
 out_free_vq:
-	vdev->config->del_vq(vblk->vq);
+	vdev->config->del_vqs(vdev);
 out_free_vblk:
 	kfree(vblk);
 out:
 	return err;
 }
 
-static void virtblk_remove(struct virtio_device *vdev)
+static void __devexit virtblk_remove(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk = vdev->priv;
 
@@ -409,7 +409,7 @@
 	blk_cleanup_queue(vblk->disk->queue);
 	put_disk(vblk->disk);
 	mempool_destroy(vblk->pool);
-	vdev->config->del_vq(vblk->vq);
+	vdev->config->del_vqs(vdev);
 	kfree(vblk);
 }
 
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 86e83f8..32216b6 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -35,13 +35,13 @@
 
 static void random_recv_done(struct virtqueue *vq)
 {
-	int len;
+	unsigned int len;
 
 	/* We can get spurious callbacks, e.g. shared IRQs + virtio_pci. */
 	if (!vq->vq_ops->get_buf(vq, &len))
 		return;
 
-	data_left = len / sizeof(random_data[0]);
+	data_left += len;
 	complete(&have_data);
 }
 
@@ -49,7 +49,7 @@
 {
 	struct scatterlist sg;
 
-	sg_init_one(&sg, random_data, RANDOM_DATA_SIZE);
+	sg_init_one(&sg, random_data+data_left, RANDOM_DATA_SIZE-data_left);
 	/* There should always be room for one buffer. */
 	if (vq->vq_ops->add_buf(vq, &sg, 0, 1, random_data) != 0)
 		BUG();
@@ -59,24 +59,32 @@
 /* At least we don't udelay() in a loop like some other drivers. */
 static int virtio_data_present(struct hwrng *rng, int wait)
 {
-	if (data_left)
+	if (data_left >= sizeof(u32))
 		return 1;
 
+again:
 	if (!wait)
 		return 0;
 
 	wait_for_completion(&have_data);
+
+	/* Not enough?  Re-register. */
+	if (unlikely(data_left < sizeof(u32))) {
+		register_buffer();
+		goto again;
+	}
+
 	return 1;
 }
 
 /* virtio_data_present() must have succeeded before this is called. */
 static int virtio_data_read(struct hwrng *rng, u32 *data)
 {
-	BUG_ON(!data_left);
+	BUG_ON(data_left < sizeof(u32));
+	data_left -= sizeof(u32);
+	*data = random_data[data_left / 4];
 
-	*data = random_data[--data_left];
-
-	if (!data_left) {
+	if (data_left < sizeof(u32)) {
 		init_completion(&have_data);
 		register_buffer();
 	}
@@ -94,13 +102,13 @@
 	int err;
 
 	/* We expect a single virtqueue. */
-	vq = vdev->config->find_vq(vdev, 0, random_recv_done);
+	vq = virtio_find_single_vq(vdev, random_recv_done, "input");
 	if (IS_ERR(vq))
 		return PTR_ERR(vq);
 
 	err = hwrng_register(&virtio_hwrng);
 	if (err) {
-		vdev->config->del_vq(vq);
+		vdev->config->del_vqs(vdev);
 		return err;
 	}
 
@@ -112,7 +120,7 @@
 {
 	vdev->config->reset(vdev);
 	hwrng_unregister(&virtio_hwrng);
-	vdev->config->del_vq(vq);
+	vdev->config->del_vqs(vdev);
 }
 
 static struct virtio_device_id id_table[] = {
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index ff6f5a4..c74dacf 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -188,6 +188,9 @@
  * Finally we put our input buffer in the input queue, ready to receive. */
 static int __devinit virtcons_probe(struct virtio_device *dev)
 {
+	vq_callback_t *callbacks[] = { hvc_handle_input, NULL};
+	const char *names[] = { "input", "output" };
+	struct virtqueue *vqs[2];
 	int err;
 
 	vdev = dev;
@@ -199,20 +202,15 @@
 		goto fail;
 	}
 
-	/* Find the input queue. */
+	/* Find the queues. */
 	/* FIXME: This is why we want to wean off hvc: we do nothing
 	 * when input comes in. */
-	in_vq = vdev->config->find_vq(vdev, 0, hvc_handle_input);
-	if (IS_ERR(in_vq)) {
-		err = PTR_ERR(in_vq);
+	err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names);
+	if (err)
 		goto free;
-	}
 
-	out_vq = vdev->config->find_vq(vdev, 1, NULL);
-	if (IS_ERR(out_vq)) {
-		err = PTR_ERR(out_vq);
-		goto free_in_vq;
-	}
+	in_vq = vqs[0];
+	out_vq = vqs[1];
 
 	/* Start using the new console output. */
 	virtio_cons.get_chars = get_chars;
@@ -233,17 +231,15 @@
 	hvc = hvc_alloc(0, 0, &virtio_cons, PAGE_SIZE);
 	if (IS_ERR(hvc)) {
 		err = PTR_ERR(hvc);
-		goto free_out_vq;
+		goto free_vqs;
 	}
 
 	/* Register the input buffer the first time. */
 	add_inbuf();
 	return 0;
 
-free_out_vq:
-	vdev->config->del_vq(out_vq);
-free_in_vq:
-	vdev->config->del_vq(in_vq);
+free_vqs:
+	vdev->config->del_vqs(vdev);
 free:
 	kfree(inbuf);
 fail:
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index 403d0e4..fc0949a 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -216,6 +216,7 @@
 	.host_flags 	= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
 			  IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
 	.pio_mask 	= ATA_PIO6,
+	.chipset	= ide_generic,
 };
 
 /*
@@ -246,8 +247,7 @@
 static int __init at91_ide_probe(struct platform_device *pdev)
 {
 	int ret;
-	hw_regs_t hw;
-	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_host *host;
 	struct resource *res;
 	unsigned long tf_base = 0, ctl_base = 0;
@@ -304,10 +304,9 @@
 		ide_std_init_ports(&hw, tf_base, ctl_base + 6);
 
 	hw.irq = board->irq_pin;
-	hw.chipset = ide_generic;
 	hw.dev = &pdev->dev;
 
-	host = ide_host_alloc(&at91_ide_port_info, hws);
+	host = ide_host_alloc(&at91_ide_port_info, hws, 1);
 	if (!host) {
 		perr("failed to allocate ide host\n");
 		return -ENOMEM;
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index 4601364..58121bd 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -449,7 +449,7 @@
 }
 #endif
 
-static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
+static void auide_setup_ports(struct ide_hw *hw, _auide_hwif *ahwif)
 {
 	int i;
 	unsigned long *ata_regs = hw->io_ports_array;
@@ -499,6 +499,7 @@
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 	.mwdma_mask		= ATA_MWDMA2,
 #endif
+	.chipset		= ide_au1xxx,
 };
 
 static int au_ide_probe(struct platform_device *dev)
@@ -507,7 +508,7 @@
 	struct resource *res;
 	struct ide_host *host;
 	int ret = 0;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
 	char *mode = "MWDMA2";
@@ -548,9 +549,8 @@
 	auide_setup_ports(&hw, ahwif);
 	hw.irq = ahwif->irq;
 	hw.dev = &dev->dev;
-	hw.chipset = ide_au1xxx;
 
-	ret = ide_host_add(&au1xxx_port_info, hws, &host);
+	ret = ide_host_add(&au1xxx_port_info, hws, 1, &host);
 	if (ret)
 		goto out;
 
diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c
index d028f88..e3c6a59 100644
--- a/drivers/ide/buddha.c
+++ b/drivers/ide/buddha.c
@@ -121,7 +121,7 @@
     return 1;
 }
 
-static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
+static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
 				      unsigned long ctl, unsigned long irq_port,
 				      ide_ack_intr_t *ack_intr)
 {
@@ -139,13 +139,12 @@
 
 	hw->irq = IRQ_AMIGA_PORTS;
 	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info buddha_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
     /*
@@ -161,7 +160,7 @@
 
 	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
 		unsigned long board;
-		hw_regs_t hw[MAX_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
+		struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS];
 
 		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
 			buddha_num_hwifs = BUDDHA_NUM_HWIFS;
@@ -225,7 +224,7 @@
 			hws[i] = &hw[i];
 		}
 
-		ide_host_add(&buddha_port_info, hws, NULL);
+		ide_host_add(&buddha_port_info, hws, i, NULL);
 	}
 
 	return 0;
diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c
index 8890276..1683ed5 100644
--- a/drivers/ide/cmd640.c
+++ b/drivers/ide/cmd640.c
@@ -708,7 +708,7 @@
 	int second_port_cmd640 = 0, rc;
 	const char *bus_type, *port2;
 	u8 b, cfr;
-	hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
+	struct ide_hw hw[2], *hws[2];
 
 	if (cmd640_vlb && probe_for_cmd640_vlb()) {
 		bus_type = "VLB";
@@ -762,11 +762,9 @@
 
 	ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
 	hw[0].irq = 14;
-	hw[0].chipset = ide_cmd640;
 
 	ide_std_init_ports(&hw[1], 0x170, 0x376);
 	hw[1].irq = 15;
-	hw[1].chipset = ide_cmd640;
 
 	printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
 			 "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
@@ -824,7 +822,8 @@
 	cmd640_dump_regs();
 #endif
 
-	return ide_host_add(&cmd640_port_info, hws, NULL);
+	return ide_host_add(&cmd640_port_info, hws, second_port_cmd640 ? 2 : 1,
+			    NULL);
 }
 
 module_param_named(probe_vlb, cmd640_vlb, bool, 0);
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index 87987a7..bd066bb 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -110,7 +110,7 @@
 static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	const struct ide_port_info *d = &cyrix_chipset;
-	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
+	struct ide_hw hw[2], *hws[] = { NULL, NULL };
 
 	ide_setup_pci_noise(dev, d);
 
@@ -136,7 +136,7 @@
 	ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
 	hw[0].irq = 14;
 
-	return ide_host_add(d, hws, NULL);
+	return ide_host_add(d, hws, 2, NULL);
 }
 
 static const struct pci_device_id cs5520_pci_tbl[] = {
diff --git a/drivers/ide/delkin_cb.c b/drivers/ide/delkin_cb.c
index f153b95..1e10eba 100644
--- a/drivers/ide/delkin_cb.c
+++ b/drivers/ide/delkin_cb.c
@@ -68,6 +68,7 @@
 				  IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
 	.init_chipset		= delkin_cb_init_chipset,
+	.chipset		= ide_pci,
 };
 
 static int __devinit
@@ -76,7 +77,7 @@
 	struct ide_host *host;
 	unsigned long base;
 	int rc;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	rc = pci_enable_device(dev);
 	if (rc) {
@@ -97,9 +98,8 @@
 	ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
 	hw.irq = dev->irq;
 	hw.dev = &dev->dev;
-	hw.chipset = ide_pci;		/* this enables IRQ sharing */
 
-	rc = ide_host_add(&delkin_cb_port_info, hws, &host);
+	rc = ide_host_add(&delkin_cb_port_info, hws, 1, &host);
 	if (rc)
 		goto out_disable;
 
diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
index 0e2df67..22fa273 100644
--- a/drivers/ide/falconide.c
+++ b/drivers/ide/falconide.c
@@ -111,9 +111,10 @@
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
-static void __init falconide_setup_ports(hw_regs_t *hw)
+static void __init falconide_setup_ports(struct ide_hw *hw)
 {
 	int i;
 
@@ -128,8 +129,6 @@
 
 	hw->irq = IRQ_MFP_IDE;
 	hw->ack_intr = NULL;
-
-	hw->chipset = ide_generic;
 }
 
     /*
@@ -139,7 +138,7 @@
 static int __init falconide_init(void)
 {
 	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	int rc;
 
 	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
@@ -154,7 +153,7 @@
 
 	falconide_setup_ports(&hw);
 
-	host = ide_host_alloc(&falconide_port_info, hws);
+	host = ide_host_alloc(&falconide_port_info, hws, 1);
 	if (host == NULL) {
 		rc = -ENOMEM;
 		goto err;
diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c
index c711951..4451a6a 100644
--- a/drivers/ide/gayle.c
+++ b/drivers/ide/gayle.c
@@ -88,7 +88,7 @@
     return 1;
 }
 
-static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
+static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
 				     unsigned long ctl, unsigned long irq_port,
 				     ide_ack_intr_t *ack_intr)
 {
@@ -106,14 +106,13 @@
 
 	hw->irq = IRQ_AMIGA_PORTS;
 	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info gayle_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
     /*
@@ -126,7 +125,7 @@
     unsigned long base, ctrlport, irqport;
     ide_ack_intr_t *ack_intr;
     int a4000, i, rc;
-    hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
+    struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
 
     if (!MACH_IS_AMIGA)
 	return -ENODEV;
@@ -171,7 +170,7 @@
 	hws[i] = &hw[i];
     }
 
-    rc = ide_host_add(&gayle_port_info, hws, NULL);
+    rc = ide_host_add(&gayle_port_info, hws, i, NULL);
     if (rc)
 	release_mem_region(res_start, res_n);
 
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 0feb66c..7ce68ef 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -138,14 +138,6 @@
 #undef	HPT_RESET_STATE_ENGINE
 #undef	HPT_DELAY_INTERRUPT
 
-static const char *quirk_drives[] = {
-	"QUANTUM FIREBALLlct08 08",
-	"QUANTUM FIREBALLP KA6.4",
-	"QUANTUM FIREBALLP LM20.4",
-	"QUANTUM FIREBALLP LM20.5",
-	NULL
-};
-
 static const char *bad_ata100_5[] = {
 	"IBM-DTLA-307075",
 	"IBM-DTLA-307060",
@@ -729,27 +721,13 @@
 	hpt3xx_set_mode(drive, XFER_PIO_0 + pio);
 }
 
-static void hpt3xx_quirkproc(ide_drive_t *drive)
-{
-	char *m			= (char *)&drive->id[ATA_ID_PROD];
-	const  char **list	= quirk_drives;
-
-	while (*list)
-		if (strstr(m, *list++)) {
-			drive->quirk_list = 1;
-			return;
-		}
-
-	drive->quirk_list = 0;
-}
-
 static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
 {
 	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
 	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 
-	if (drive->quirk_list == 0)
+	if ((drive->dev_flags & IDE_DFLAG_NIEN_QUIRK) == 0)
 		return;
 
 	if (info->chip_type >= HPT370) {
@@ -1404,7 +1382,6 @@
 static const struct ide_port_ops hpt3xx_port_ops = {
 	.set_pio_mode		= hpt3xx_set_pio_mode,
 	.set_dma_mode		= hpt3xx_set_mode,
-	.quirkproc		= hpt3xx_quirkproc,
 	.maskproc		= hpt3xx_maskproc,
 	.mdma_filter		= hpt3xx_mdma_filter,
 	.udma_filter		= hpt3xx_udma_filter,
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 36da913..5af3d0f 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -65,8 +65,6 @@
 };
 
 struct icside_state {
-	unsigned int channel;
-	unsigned int enabled;
 	void __iomem *irq_port;
 	void __iomem *ioc_base;
 	unsigned int sel;
@@ -116,18 +114,11 @@
 	struct icside_state *state = ec->irq_data;
 	void __iomem *base = state->irq_port;
 
-	state->enabled = 1;
+	writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
+	readb(base + ICS_ARCIN_V6_INTROFFSET_2);
 
-	switch (state->channel) {
-	case 0:
-		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
-		readb(base + ICS_ARCIN_V6_INTROFFSET_2);
-		break;
-	case 1:
-		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
-		readb(base + ICS_ARCIN_V6_INTROFFSET_1);
-		break;
-	}
+	writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
+	readb(base + ICS_ARCIN_V6_INTROFFSET_1);
 }
 
 /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
@@ -137,8 +128,6 @@
 {
 	struct icside_state *state = ec->irq_data;
 
-	state->enabled = 0;
-
 	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
 	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
 }
@@ -160,44 +149,6 @@
 	.irqpending	= icside_irqpending_arcin_v6,
 };
 
-/*
- * Handle routing of interrupts.  This is called before
- * we write the command to the drive.
- */
-static void icside_maskproc(ide_drive_t *drive, int mask)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct expansion_card *ec = ECARD_DEV(hwif->dev);
-	struct icside_state *state = ecard_get_drvdata(ec);
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	state->channel = hwif->channel;
-
-	if (state->enabled && !mask) {
-		switch (hwif->channel) {
-		case 0:
-			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-			break;
-		case 1:
-			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-			break;
-		}
-	} else {
-		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-	}
-
-	local_irq_restore(flags);
-}
-
-static const struct ide_port_ops icside_v6_no_dma_port_ops = {
-	.maskproc		= icside_maskproc,
-};
-
 #ifdef CONFIG_BLK_DEV_IDEDMA_ICS
 /*
  * SG-DMA support.
@@ -275,7 +226,6 @@
 
 static const struct ide_port_ops icside_v6_port_ops = {
 	.set_dma_mode		= icside_set_dma_mode,
-	.maskproc		= icside_maskproc,
 };
 
 static void icside_dma_host_set(ide_drive_t *drive, int on)
@@ -320,11 +270,6 @@
 	BUG_ON(dma_channel_active(ec->dma));
 
 	/*
-	 * Ensure that we have the right interrupt routed.
-	 */
-	icside_maskproc(drive, 0);
-
-	/*
 	 * Route the DMA signals to the correct interface.
 	 */
 	writeb(state->sel | hwif->channel, state->ioc_base);
@@ -381,7 +326,7 @@
 	return -EOPNOTSUPP;
 }
 
-static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
+static void icside_setup_ports(struct ide_hw *hw, void __iomem *base,
 			       struct cardinfo *info, struct expansion_card *ec)
 {
 	unsigned long port = (unsigned long)base + info->dataoffset;
@@ -398,11 +343,11 @@
 
 	hw->irq = ec->irq;
 	hw->dev = &ec->dev;
-	hw->chipset = ide_acorn;
 }
 
 static const struct ide_port_info icside_v5_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.chipset		= ide_acorn,
 };
 
 static int __devinit
@@ -410,7 +355,7 @@
 {
 	void __iomem *base;
 	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	int ret;
 
 	base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
@@ -431,7 +376,7 @@
 
 	icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec);
 
-	host = ide_host_alloc(&icside_v5_port_info, hws);
+	host = ide_host_alloc(&icside_v5_port_info, hws, 1);
 	if (host == NULL)
 		return -ENODEV;
 
@@ -452,11 +397,11 @@
 
 static const struct ide_port_info icside_v6_port_info __initdata = {
 	.init_dma		= icside_dma_off_init,
-	.port_ops		= &icside_v6_no_dma_port_ops,
 	.dma_ops		= &icside_v6_dma_ops,
 	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
 	.mwdma_mask		= ATA_MWDMA2,
 	.swdma_mask		= ATA_SWDMA2,
+	.chipset		= ide_acorn,
 };
 
 static int __devinit
@@ -466,7 +411,7 @@
 	struct ide_host *host;
 	unsigned int sel = 0;
 	int ret;
-	hw_regs_t hw[2], *hws[] = { &hw[0], &hw[1], NULL, NULL };
+	struct ide_hw hw[2], *hws[] = { &hw[0], &hw[1] };
 	struct ide_port_info d = icside_v6_port_info;
 
 	ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
@@ -506,7 +451,7 @@
 	icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec);
 	icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec);
 
-	host = ide_host_alloc(&d, hws);
+	host = ide_host_alloc(&d, hws, 2);
 	if (host == NULL)
 		return -ENODEV;
 
diff --git a/drivers/ide/ide-4drives.c b/drivers/ide/ide-4drives.c
index 78aca75..979d342 100644
--- a/drivers/ide/ide-4drives.c
+++ b/drivers/ide/ide-4drives.c
@@ -25,12 +25,13 @@
 	.port_ops		= &ide_4drives_port_ops,
 	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA |
 				  IDE_HFLAG_4DRIVES,
+	.chipset		= ide_4drives,
 };
 
 static int __init ide_4drives_init(void)
 {
 	unsigned long base = 0x1f0, ctl = 0x3f6;
-	hw_regs_t hw, *hws[] = { &hw, &hw, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw, &hw };
 
 	if (probe_4drives == 0)
 		return -ENODEV;
@@ -52,9 +53,8 @@
 
 	ide_std_init_ports(&hw, base, ctl);
 	hw.irq = 14;
-	hw.chipset = ide_4drives;
 
-	return ide_host_add(&ide_4drives_port_info, hws, NULL);
+	return ide_host_add(&ide_4drives_port_info, hws, 2, NULL);
 }
 
 module_init(ide_4drives_init);
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 757e595..bbdd254 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -259,7 +259,7 @@
 	pc->req_xfer = blk_rq_bytes(sense_rq);
 
 	if (drive->media == ide_tape)
-		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
+		drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
 
 	/*
 	 * Push back the failed request and put request sense on top
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 9e47f35..527908f 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -155,6 +155,7 @@
 	.port_ops		= &idecs_port_ops,
 	.host_flags		= IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_pci,
 };
 
 static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
@@ -163,7 +164,7 @@
     struct ide_host *host;
     ide_hwif_t *hwif;
     int i, rc;
-    hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+    struct ide_hw hw, *hws[] = { &hw };
 
     if (!request_region(io, 8, DRV_NAME)) {
 	printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
@@ -181,10 +182,9 @@
     memset(&hw, 0, sizeof(hw));
     ide_std_init_ports(&hw, io, ctl);
     hw.irq = irq;
-    hw.chipset = ide_pci;
     hw.dev = &handle->dev;
 
-    rc = ide_host_add(&idecs_port_info, hws, &host);
+    rc = ide_host_add(&idecs_port_info, hws, 1, &host);
     if (rc)
 	goto out_release;
 
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index c6f7fcf..6a1de21 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -302,14 +302,12 @@
 	{ NULL,		NULL }
 };
 
-static void idedisk_check_hpa(ide_drive_t *drive)
+static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48)
 {
-	unsigned long long capacity, set_max;
-	int lba48 = ata_id_lba48_enabled(drive->id);
+	u64 capacity, set_max;
 
 	capacity = drive->capacity64;
-
-	set_max = idedisk_read_native_max_address(drive, lba48);
+	set_max  = idedisk_read_native_max_address(drive, lba48);
 
 	if (ide_in_drive_list(drive->id, hpa_list)) {
 		/*
@@ -320,9 +318,31 @@
 			set_max--;
 	}
 
+	return set_max;
+}
+
+static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48)
+{
+	set_max = idedisk_set_max_address(drive, set_max, lba48);
+	if (set_max)
+		drive->capacity64 = set_max;
+
+	return set_max;
+}
+
+static void idedisk_check_hpa(ide_drive_t *drive)
+{
+	u64 capacity, set_max;
+	int lba48 = ata_id_lba48_enabled(drive->id);
+
+	capacity = drive->capacity64;
+	set_max  = ide_disk_hpa_get_native_capacity(drive, lba48);
+
 	if (set_max <= capacity)
 		return;
 
+	drive->probed_capacity = set_max;
+
 	printk(KERN_INFO "%s: Host Protected Area detected.\n"
 			 "\tcurrent capacity is %llu sectors (%llu MB)\n"
 			 "\tnative  capacity is %llu sectors (%llu MB)\n",
@@ -330,13 +350,13 @@
 			 capacity, sectors_to_MB(capacity),
 			 set_max, sectors_to_MB(set_max));
 
-	set_max = idedisk_set_max_address(drive, set_max, lba48);
+	if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0)
+		return;
 
-	if (set_max) {
-		drive->capacity64 = set_max;
+	set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48);
+	if (set_max)
 		printk(KERN_INFO "%s: Host Protected Area disabled.\n",
 				 drive->name);
-	}
 }
 
 static int ide_disk_get_capacity(ide_drive_t *drive)
@@ -358,6 +378,8 @@
 		drive->capacity64 = drive->cyl * drive->head * drive->sect;
 	}
 
+	drive->probed_capacity = drive->capacity64;
+
 	if (lba) {
 		drive->dev_flags |= IDE_DFLAG_LBA;
 
@@ -376,7 +398,7 @@
 		       "%llu sectors (%llu MB)\n",
 		       drive->name, (unsigned long long)drive->capacity64,
 		       sectors_to_MB(drive->capacity64));
-		drive->capacity64 = 1ULL << 28;
+		drive->probed_capacity = drive->capacity64 = 1ULL << 28;
 	}
 
 	if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
@@ -392,6 +414,34 @@
 	return 0;
 }
 
+static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity)
+{
+	u64 set = min(capacity, drive->probed_capacity);
+	u16 *id = drive->id;
+	int lba48 = ata_id_lba48_enabled(id);
+
+	if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
+	    ata_id_hpa_enabled(id) == 0)
+		goto out;
+
+	/*
+	 * according to the spec the SET MAX ADDRESS command shall be
+	 * immediately preceded by a READ NATIVE MAX ADDRESS command
+	 */
+	capacity = ide_disk_hpa_get_native_capacity(drive, lba48);
+	if (capacity == 0)
+		goto out;
+
+	set = ide_disk_hpa_set_capacity(drive, set, lba48);
+	if (set) {
+		/* needed for ->resume to disable HPA */
+		drive->dev_flags |= IDE_DFLAG_NOHPA;
+		return set;
+	}
+out:
+	return drive->capacity64;
+}
+
 static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
 {
 	ide_drive_t *drive = q->queuedata;
@@ -428,14 +478,14 @@
 	if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
 		return -EINVAL;
 
-	if (drive->special.b.set_multmode)
+	if (drive->special_flags & IDE_SFLAG_SET_MULTMODE)
 		return -EBUSY;
 
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
 
 	drive->mult_req = arg;
-	drive->special.b.set_multmode = 1;
+	drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
 	error = blk_execute_rq(drive->queue, NULL, rq, 0);
 	blk_put_request(rq);
 
@@ -740,6 +790,7 @@
 
 const struct ide_disk_ops ide_ata_disk_ops = {
 	.check		= ide_disk_check,
+	.set_capacity	= ide_disk_set_capacity,
 	.get_capacity	= ide_disk_get_capacity,
 	.setup		= ide_disk_setup,
 	.flush		= ide_disk_flush,
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 001f68f..219e6fb 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -347,7 +347,6 @@
 
 	return mode;
 }
-EXPORT_SYMBOL_GPL(ide_find_dma_mode);
 
 static int ide_tune_dma(ide_drive_t *drive)
 {
diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c
index 5d5fb96..2b91419 100644
--- a/drivers/ide/ide-eh.c
+++ b/drivers/ide/ide-eh.c
@@ -52,7 +52,7 @@
 	}
 
 	if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
-		drive->special.b.recalibrate = 1;
+		drive->special_flags |= IDE_SFLAG_RECALIBRATE;
 
 	++rq->errors;
 
@@ -268,9 +268,8 @@
 {
 	int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1;
 
-	drive->special.all = 0;
-	drive->special.b.set_geometry = legacy;
-	drive->special.b.recalibrate  = legacy;
+	drive->special_flags =
+		legacy ? (IDE_SFLAG_SET_GEOMETRY | IDE_SFLAG_RECALIBRATE) : 0;
 
 	drive->mult_count = 0;
 	drive->dev_flags &= ~IDE_DFLAG_PARKED;
@@ -280,7 +279,7 @@
 		drive->mult_req = 0;
 
 	if (drive->mult_req != drive->mult_count)
-		drive->special.b.set_multmode = 1;
+		drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
 }
 
 static void pre_reset(ide_drive_t *drive)
@@ -408,8 +407,9 @@
 	/* more than enough time */
 	udelay(10);
 	/* clear SRST, leave nIEN (unless device is on the quirk list) */
-	tp_ops->write_devctl(hwif, (drive->quirk_list == 2 ? 0 : ATA_NIEN) |
-			     ATA_DEVCTL_OBS);
+	tp_ops->write_devctl(hwif,
+		((drive->dev_flags & IDE_DFLAG_NIEN_QUIRK) ? 0 : ATA_NIEN) |
+		 ATA_DEVCTL_OBS);
 	/* more than enough time */
 	udelay(10);
 	hwif->poll_timeout = jiffies + WAIT_WORSTCASE;
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index 4b6b71e..2141190 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -287,6 +287,19 @@
 	return ret;
 }
 
+static unsigned long long ide_gd_set_capacity(struct gendisk *disk,
+					      unsigned long long capacity)
+{
+	struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
+	ide_drive_t *drive = idkp->drive;
+	const struct ide_disk_ops *disk_ops = drive->disk_ops;
+
+	if (disk_ops->set_capacity)
+		return disk_ops->set_capacity(drive, capacity);
+
+	return drive->capacity64;
+}
+
 static int ide_gd_revalidate_disk(struct gendisk *disk)
 {
 	struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
@@ -315,6 +328,7 @@
 	.locked_ioctl		= ide_gd_ioctl,
 	.getgeo			= ide_gd_getgeo,
 	.media_changed		= ide_gd_media_changed,
+	.set_capacity		= ide_gd_set_capacity,
 	.revalidate_disk	= ide_gd_revalidate_disk
 };
 
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 7812ca0..54d7c46 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -29,6 +29,7 @@
 
 static const struct ide_port_info ide_generic_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
 #ifdef CONFIG_ARM
@@ -85,7 +86,7 @@
 
 static int __init ide_generic_init(void)
 {
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	unsigned long io_addr;
 	int i, rc = 0, primary = 0, secondary = 0;
 
@@ -132,9 +133,7 @@
 #else
 			hw.irq = legacy_irqs[i];
 #endif
-			hw.chipset = ide_generic;
-
-			rc = ide_host_add(&ide_generic_port_info, hws, NULL);
+			rc = ide_host_add(&ide_generic_port_info, hws, 1, NULL);
 			if (rc) {
 				release_region(io_addr + 0x206, 1);
 				release_region(io_addr, 8);
diff --git a/drivers/ide/ide-h8300.c b/drivers/ide/ide-h8300.c
index c06ebdc..520f42c 100644
--- a/drivers/ide/ide-h8300.c
+++ b/drivers/ide/ide-h8300.c
@@ -64,26 +64,26 @@
 
 #define H8300_IDE_GAP (2)
 
-static inline void hw_setup(hw_regs_t *hw)
+static inline void hw_setup(struct ide_hw *hw)
 {
 	int i;
 
-	memset(hw, 0, sizeof(hw_regs_t));
+	memset(hw, 0, sizeof(*hw));
 	for (i = 0; i <= 7; i++)
 		hw->io_ports_array[i] = CONFIG_H8300_IDE_BASE + H8300_IDE_GAP*i;
 	hw->io_ports.ctl_addr = CONFIG_H8300_IDE_ALT;
 	hw->irq = EXT_IRQ0 + CONFIG_H8300_IDE_IRQ;
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info h8300_port_info = {
 	.tp_ops			= &h8300_tp_ops,
 	.host_flags		= IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
 static int __init h8300_ide_init(void)
 {
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n");
 
@@ -96,7 +96,7 @@
 
 	hw_setup(&hw);
 
-	return ide_host_add(&h8300_port_info, hws, NULL);
+	return ide_host_add(&h8300_port_info, hws, 1, NULL);
 
 out_busy:
 	printk(KERN_ERR "ide-h8300: IDE I/F resource already used.\n");
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index bba4297..272cc38 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -184,29 +184,42 @@
 	tf->command = ATA_CMD_SET_MULTI;
 }
 
-static ide_startstop_t ide_disk_special(ide_drive_t *drive)
+/**
+ *	do_special		-	issue some special commands
+ *	@drive: drive the command is for
+ *
+ *	do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
+ *	ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
+ */
+
+static ide_startstop_t do_special(ide_drive_t *drive)
 {
-	special_t *s = &drive->special;
 	struct ide_cmd cmd;
 
+#ifdef DEBUG
+	printk(KERN_DEBUG "%s: %s: 0x%02x\n", drive->name, __func__,
+		drive->special_flags);
+#endif
+	if (drive->media != ide_disk) {
+		drive->special_flags = 0;
+		drive->mult_req = 0;
+		return ide_stopped;
+	}
+
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.protocol = ATA_PROT_NODATA;
 
-	if (s->b.set_geometry) {
-		s->b.set_geometry = 0;
+	if (drive->special_flags & IDE_SFLAG_SET_GEOMETRY) {
+		drive->special_flags &= ~IDE_SFLAG_SET_GEOMETRY;
 		ide_tf_set_specify_cmd(drive, &cmd.tf);
-	} else if (s->b.recalibrate) {
-		s->b.recalibrate = 0;
+	} else if (drive->special_flags & IDE_SFLAG_RECALIBRATE) {
+		drive->special_flags &= ~IDE_SFLAG_RECALIBRATE;
 		ide_tf_set_restore_cmd(drive, &cmd.tf);
-	} else if (s->b.set_multmode) {
-		s->b.set_multmode = 0;
+	} else if (drive->special_flags & IDE_SFLAG_SET_MULTMODE) {
+		drive->special_flags &= ~IDE_SFLAG_SET_MULTMODE;
 		ide_tf_set_setmult_cmd(drive, &cmd.tf);
-	} else if (s->all) {
-		int special = s->all;
-		s->all = 0;
-		printk(KERN_ERR "%s: bad special flag: 0x%02x\n", drive->name, special);
-		return ide_stopped;
-	}
+	} else
+		BUG();
 
 	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
 	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
@@ -217,31 +230,6 @@
 	return ide_started;
 }
 
-/**
- *	do_special		-	issue some special commands
- *	@drive: drive the command is for
- *
- *	do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
- *	ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
- *
- *	It used to do much more, but has been scaled back.
- */
-
-static ide_startstop_t do_special (ide_drive_t *drive)
-{
-	special_t *s = &drive->special;
-
-#ifdef DEBUG
-	printk("%s: do_special: 0x%02x\n", drive->name, s->all);
-#endif
-	if (drive->media == ide_disk)
-		return ide_disk_special(drive);
-
-	s->all = 0;
-	drive->mult_req = 0;
-	return ide_stopped;
-}
-
 void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -351,7 +339,8 @@
 		printk(KERN_ERR "%s: drive not ready for command\n", drive->name);
 		return startstop;
 	}
-	if (!drive->special.all) {
+
+	if (drive->special_flags == 0) {
 		struct ide_driver *drv;
 
 		/*
@@ -499,11 +488,15 @@
 
 		if ((hwif->host->host_flags & IDE_HFLAG_SERIALIZE) &&
 		    hwif != prev_port) {
+			ide_drive_t *cur_dev =
+				prev_port ? prev_port->cur_dev : NULL;
+
 			/*
 			 * set nIEN for previous port, drives in the
-			 * quirk_list may not like intr setups/cleanups
+			 * quirk list may not like intr setups/cleanups
 			 */
-			if (prev_port && prev_port->cur_dev->quirk_list == 0)
+			if (cur_dev &&
+			    (cur_dev->dev_flags & IDE_DFLAG_NIEN_QUIRK) == 0)
 				prev_port->tp_ops->write_devctl(prev_port,
 								ATA_NIEN |
 								ATA_DEVCTL_OBS);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 06fe002..fa04715 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -282,6 +282,29 @@
 	return 0;
 }
 
+static const char *nien_quirk_list[] = {
+	"QUANTUM FIREBALLlct08 08",
+	"QUANTUM FIREBALLP KA6.4",
+	"QUANTUM FIREBALLP KA9.1",
+	"QUANTUM FIREBALLP KX13.6",
+	"QUANTUM FIREBALLP KX20.5",
+	"QUANTUM FIREBALLP KX27.3",
+	"QUANTUM FIREBALLP LM20.4",
+	"QUANTUM FIREBALLP LM20.5",
+	NULL
+};
+
+void ide_check_nien_quirk_list(ide_drive_t *drive)
+{
+	const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
+
+	for (list = nien_quirk_list; *list != NULL; list++)
+		if (strstr(m, *list) != NULL) {
+			drive->dev_flags |= IDE_DFLAG_NIEN_QUIRK;
+			return;
+		}
+}
+
 int ide_driveid_update(ide_drive_t *drive)
 {
 	u16 *id;
@@ -311,7 +334,6 @@
 
 	return 1;
 out_err:
-	SELECT_MASK(drive, 0);
 	if (rc == 2)
 		printk(KERN_ERR "%s: %s: bad status\n", drive->name, __func__);
 	kfree(id);
@@ -365,7 +387,7 @@
 
 	tp_ops->exec_command(hwif, ATA_CMD_SET_FEATURES);
 
-	if (drive->quirk_list == 2)
+	if (drive->dev_flags & IDE_DFLAG_NIEN_QUIRK)
 		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
 
 	error = __ide_wait_stat(drive, drive->ready_stat,
diff --git a/drivers/ide/ide-legacy.c b/drivers/ide/ide-legacy.c
index 8c5dcbf..b9654a7 100644
--- a/drivers/ide/ide-legacy.c
+++ b/drivers/ide/ide-legacy.c
@@ -1,7 +1,7 @@
 #include <linux/kernel.h>
 #include <linux/ide.h>
 
-static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw,
+static void ide_legacy_init_one(struct ide_hw **hws, struct ide_hw *hw,
 				u8 port_no, const struct ide_port_info *d,
 				unsigned long config)
 {
@@ -33,7 +33,6 @@
 
 	ide_std_init_ports(hw, base, ctl);
 	hw->irq = irq;
-	hw->chipset = d->chipset;
 	hw->config = config;
 
 	hws[port_no] = hw;
@@ -41,7 +40,7 @@
 
 int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
 {
-	hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
+	struct ide_hw hw[2], *hws[] = { NULL, NULL };
 
 	memset(&hw, 0, sizeof(hw));
 
@@ -53,6 +52,6 @@
 	    (d->host_flags & IDE_HFLAG_SINGLE))
 		return -ENOENT;
 
-	return ide_host_add(d, hws, NULL);
+	return ide_host_add(d, hws, 2, NULL);
 }
 EXPORT_SYMBOL_GPL(ide_legacy_device_add);
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index 6e80b77..017b1df 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -29,6 +29,7 @@
 
 static const struct ide_port_info ide_pnp_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
 static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
@@ -36,7 +37,7 @@
 	struct ide_host *host;
 	unsigned long base, ctl;
 	int rc;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n");
 
@@ -62,9 +63,8 @@
 	memset(&hw, 0, sizeof(hw));
 	ide_std_init_ports(&hw, base, ctl);
 	hw.irq = pnp_irq(dev, 0);
-	hw.chipset = ide_generic;
 
-	rc = ide_host_add(&ide_pnp_port_info, hws, &host);
+	rc = ide_host_add(&ide_pnp_port_info, hws, 1, &host);
 	if (rc)
 		goto out;
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index c895ed5..f371b0d 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -97,7 +97,7 @@
 		drive->mult_req = id[ATA_ID_MULTSECT] & 0xff;
 
 		if (drive->mult_req)
-			drive->special.b.set_multmode = 1;
+			drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
 	}
 }
 
@@ -465,23 +465,8 @@
 	int rc;
 	u8 cmd;
 
-	/*
-	 *	In order to keep things simple we have an id
-	 *	block for all drives at all times. If the device
-	 *	is pre ATA or refuses ATA/ATAPI identify we
-	 *	will add faked data to this.
-	 *
-	 *	Also note that 0 everywhere means "can't do X"
-	 */
- 
 	drive->dev_flags &= ~IDE_DFLAG_ID_READ;
 
-	drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL);
-	if (drive->id == NULL) {
-		printk(KERN_ERR "ide: out of memory for id data.\n");
-		return 0;
-	}
-
 	m = (char *)&drive->id[ATA_ID_PROD];
 	strcpy(m, "UNKNOWN");
 
@@ -497,7 +482,7 @@
 		}
 
 		if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
-			goto out_free;
+			return 0;
 
 		/* identification failed? */
 		if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
@@ -521,7 +506,7 @@
 	}
 
 	if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
-		goto out_free;
+		return 0;
 
 	/* The drive wasn't being helpful. Add generic info only */
 	if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
@@ -535,9 +520,6 @@
 	}
 
 	return 1;
-out_free:
-	kfree(drive->id);
-	return 0;
 }
 
 static void hwif_release_dev(struct device *dev)
@@ -702,8 +684,14 @@
 	if (irqd)
 		disable_irq(hwif->irq);
 
-	if (ide_port_wait_ready(hwif) == -EBUSY)
-		printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
+	rc = ide_port_wait_ready(hwif);
+	if (rc == -ENODEV) {
+		printk(KERN_INFO "%s: no devices on the port\n", hwif->name);
+		goto out;
+	} else if (rc == -EBUSY)
+		printk(KERN_ERR "%s: not ready before the probe\n", hwif->name);
+	else
+		rc = -ENODEV;
 
 	/*
 	 * Second drive should only exist if first drive was found,
@@ -714,7 +702,7 @@
 		if (drive->dev_flags & IDE_DFLAG_PRESENT)
 			rc = 0;
 	}
-
+out:
 	/*
 	 * Use cached IRQ number. It might be (and is...) changed by probe
 	 * code above
@@ -732,6 +720,8 @@
 	int i;
 
 	ide_port_for_each_present_dev(i, drive, hwif) {
+		ide_check_nien_quirk_list(drive);
+
 		if (port_ops && port_ops->quirkproc)
 			port_ops->quirkproc(drive);
 	}
@@ -817,8 +807,6 @@
 		if (ide_init_queue(drive)) {
 			printk(KERN_ERR "ide: failed to init %s\n",
 					drive->name);
-			kfree(drive->id);
-			drive->id = NULL;
 			drive->dev_flags &= ~IDE_DFLAG_PRESENT;
 			continue;
 		}
@@ -947,9 +935,6 @@
 	blk_cleanup_queue(drive->queue);
 	drive->queue = NULL;
 
-	kfree(drive->id);
-	drive->id = NULL;
-
 	drive->dev_flags &= ~IDE_DFLAG_PRESENT;
 
 	complete(&drive->gendev_rel_comp);
@@ -1035,6 +1020,15 @@
 		if (port_ops && port_ops->init_dev)
 			port_ops->init_dev(drive);
 	}
+
+	ide_port_for_each_dev(i, drive, hwif) {
+		/*
+		 * default to PIO Mode 0 before we figure out
+		 * the most suited mode for the attached device
+		 */
+		if (port_ops && port_ops->set_pio_mode)
+			port_ops->set_pio_mode(drive, 0);
+	}
 }
 
 static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
@@ -1042,8 +1036,7 @@
 {
 	hwif->channel = port;
 
-	if (d->chipset)
-		hwif->chipset = d->chipset;
+	hwif->chipset = d->chipset ? d->chipset : ide_pci;
 
 	if (d->init_iops)
 		d->init_iops(hwif);
@@ -1124,16 +1117,19 @@
 
 	ide_port_for_each_dev(i, drive, hwif) {
 		u8 j = (hwif->index * MAX_DRIVES) + i;
+		u16 *saved_id = drive->id;
 
 		memset(drive, 0, sizeof(*drive));
+		memset(saved_id, 0, SECTOR_SIZE);
+		drive->id = saved_id;
 
 		drive->media			= ide_disk;
 		drive->select			= (i << 4) | ATA_DEVICE_OBS;
 		drive->hwif			= hwif;
 		drive->ready_stat		= ATA_DRDY;
 		drive->bad_wstat		= BAD_W_STAT;
-		drive->special.b.recalibrate	= 1;
-		drive->special.b.set_geometry	= 1;
+		drive->special_flags		= IDE_SFLAG_RECALIBRATE |
+						  IDE_SFLAG_SET_GEOMETRY;
 		drive->name[0]			= 'h';
 		drive->name[1]			= 'd';
 		drive->name[2]			= 'a' + j;
@@ -1168,11 +1164,10 @@
 	ide_port_init_devices_data(hwif);
 }
 
-static void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
+static void ide_init_port_hw(ide_hwif_t *hwif, struct ide_hw *hw)
 {
 	memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports));
 	hwif->irq = hw->irq;
-	hwif->chipset = hw->chipset;
 	hwif->dev = hw->dev;
 	hwif->gendev.parent = hw->parent ? hw->parent : hw->dev;
 	hwif->ack_intr = hw->ack_intr;
@@ -1233,8 +1228,10 @@
 	ide_drive_t *drive;
 	int i;
 
-	ide_port_for_each_dev(i, drive, hwif)
+	ide_port_for_each_dev(i, drive, hwif) {
+		kfree(drive->id);
 		kfree(drive);
+	}
 }
 
 static int ide_port_alloc_devices(ide_hwif_t *hwif, int node)
@@ -1248,6 +1245,18 @@
 		if (drive == NULL)
 			goto out_nomem;
 
+		/*
+		 * In order to keep things simple we have an id
+		 * block for all drives at all times. If the device
+		 * is pre ATA or refuses ATA/ATAPI identify we
+		 * will add faked data to this.
+		 *
+		 * Also note that 0 everywhere means "can't do X"
+		 */
+		drive->id = kzalloc_node(SECTOR_SIZE, GFP_KERNEL, node);
+		if (drive->id == NULL)
+			goto out_nomem;
+
 		hwif->devices[i] = drive;
 	}
 	return 0;
@@ -1257,7 +1266,8 @@
 	return -ENOMEM;
 }
 
-struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
+struct ide_host *ide_host_alloc(const struct ide_port_info *d,
+				struct ide_hw **hws, unsigned int n_ports)
 {
 	struct ide_host *host;
 	struct device *dev = hws[0] ? hws[0]->dev : NULL;
@@ -1268,7 +1278,7 @@
 	if (host == NULL)
 		return NULL;
 
-	for (i = 0; i < MAX_HOST_PORTS; i++) {
+	for (i = 0; i < n_ports; i++) {
 		ide_hwif_t *hwif;
 		int idx;
 
@@ -1288,6 +1298,7 @@
 		if (idx < 0) {
 			printk(KERN_ERR "%s: no free slot for interface\n",
 					d ? d->name : "ide");
+			ide_port_free_devices(hwif);
 			kfree(hwif);
 			continue;
 		}
@@ -1344,7 +1355,7 @@
 }
 
 int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
-		      hw_regs_t **hws)
+		      struct ide_hw **hws)
 {
 	ide_hwif_t *hwif, *mate = NULL;
 	int i, j = 0;
@@ -1438,13 +1449,13 @@
 }
 EXPORT_SYMBOL_GPL(ide_host_register);
 
-int ide_host_add(const struct ide_port_info *d, hw_regs_t **hws,
-		 struct ide_host **hostp)
+int ide_host_add(const struct ide_port_info *d, struct ide_hw **hws,
+		 unsigned int n_ports, struct ide_host **hostp)
 {
 	struct ide_host *host;
 	int rc;
 
-	host = ide_host_alloc(d, hws);
+	host = ide_host_alloc(d, hws, n_ports);
 	if (host == NULL)
 		return -ENOMEM;
 
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index d9764f0..4b447a8 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -240,18 +240,27 @@
 
 static void ide_tape_release(struct device *);
 
-static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
+static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
+
+static struct ide_tape_obj *ide_tape_get(struct gendisk *disk, bool cdev,
+					 unsigned int i)
 {
 	struct ide_tape_obj *tape = NULL;
 
 	mutex_lock(&idetape_ref_mutex);
-	tape = ide_drv_g(disk, ide_tape_obj);
+
+	if (cdev)
+		tape = idetape_devs[i];
+	else
+		tape = ide_drv_g(disk, ide_tape_obj);
+
 	if (tape) {
 		if (ide_device_get(tape->drive))
 			tape = NULL;
 		else
 			get_device(&tape->dev);
 	}
+
 	mutex_unlock(&idetape_ref_mutex);
 	return tape;
 }
@@ -267,24 +276,6 @@
 }
 
 /*
- * The variables below are used for the character device interface. Additional
- * state variables are defined in our ide_drive_t structure.
- */
-static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
-
-static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
-{
-	struct ide_tape_obj *tape = NULL;
-
-	mutex_lock(&idetape_ref_mutex);
-	tape = idetape_devs[i];
-	if (tape)
-		get_device(&tape->dev);
-	mutex_unlock(&idetape_ref_mutex);
-	return tape;
-}
-
-/*
  * called on each failed packet command retry to analyze the request sense. We
  * currently do not utilize this information.
  */
@@ -397,7 +388,8 @@
 		if (readpos[0] & 0x4) {
 			printk(KERN_INFO "ide-tape: Block location is unknown"
 					 "to the tape\n");
-			clear_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
+			clear_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
+				  &drive->atapi_flags);
 			uptodate = 0;
 			err = IDE_DRV_ERROR_GENERAL;
 		} else {
@@ -406,7 +398,8 @@
 
 			tape->partition = readpos[1];
 			tape->first_frame = be32_to_cpup((__be32 *)&readpos[4]);
-			set_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
+			set_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
+				&drive->atapi_flags);
 		}
 	}
 
@@ -656,15 +649,15 @@
 
 	if ((drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) == 0 &&
 	    (rq->cmd[13] & REQ_IDETAPE_PC2) == 0)
-		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
+		drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
 
 	if (drive->dev_flags & IDE_DFLAG_POST_RESET) {
-		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
+		drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
 		drive->dev_flags &= ~IDE_DFLAG_POST_RESET;
 	}
 
-	if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) &&
-	    (stat & ATA_DSC) == 0) {
+	if (!(drive->atapi_flags & IDE_AFLAG_IGNORE_DSC) &&
+	    !(stat & ATA_DSC)) {
 		if (postponed_rq == NULL) {
 			tape->dsc_polling_start = jiffies;
 			tape->dsc_poll_freq = tape->best_dsc_rw_freq;
@@ -684,7 +677,9 @@
 			tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW;
 		idetape_postpone_request(drive);
 		return ide_stopped;
-	}
+	} else
+		drive->atapi_flags &= ~IDE_AFLAG_IGNORE_DSC;
+
 	if (rq->cmd[13] & REQ_IDETAPE_READ) {
 		pc = &tape->queued_pc;
 		ide_tape_create_rw_cmd(tape, pc, rq, READ_6);
@@ -744,7 +739,7 @@
 	int load_attempted = 0;
 
 	/* Wait for the tape to become ready */
-	set_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
+	set_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT), &drive->atapi_flags);
 	timeout += jiffies;
 	while (time_before(jiffies, timeout)) {
 		if (ide_do_test_unit_ready(drive, disk) == 0)
@@ -820,7 +815,7 @@
 	if (tape->chrdev_dir != IDETAPE_DIR_READ)
 		return;
 
-	clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags);
+	clear_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags);
 	tape->valid = 0;
 	if (tape->buf != NULL) {
 		kfree(tape->buf);
@@ -1113,7 +1108,8 @@
 
 	if (tape->chrdev_dir == IDETAPE_DIR_READ) {
 		tape->valid = 0;
-		if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
+		if (test_and_clear_bit(ilog2(IDE_AFLAG_FILEMARK),
+				       &drive->atapi_flags))
 			++count;
 		ide_tape_discard_merge_buffer(drive, 0);
 	}
@@ -1168,7 +1164,7 @@
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
-		if (test_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags))
+		if (test_bit(ilog2(IDE_AFLAG_DETECT_BS), &drive->atapi_flags))
 			if (count > tape->blk_size &&
 			    (count % tape->blk_size) == 0)
 				tape->user_bs_factor = count / tape->blk_size;
@@ -1184,7 +1180,8 @@
 		/* refill if staging buffer is empty */
 		if (!tape->valid) {
 			/* If we are at a filemark, nothing more to read */
-			if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
+			if (test_bit(ilog2(IDE_AFLAG_FILEMARK),
+				     &drive->atapi_flags))
 				break;
 			/* read */
 			if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ,
@@ -1202,7 +1199,7 @@
 		done += todo;
 	}
 
-	if (!done && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) {
+	if (!done && test_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags)) {
 		debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
 
 		idetape_space_over_filemarks(drive, MTFSF, 1);
@@ -1336,7 +1333,8 @@
 		ide_tape_discard_merge_buffer(drive, 0);
 		retval = ide_do_start_stop(drive, disk, !IDETAPE_LU_LOAD_MASK);
 		if (!retval)
-			clear_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
+			clear_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT),
+				  &drive->atapi_flags);
 		return retval;
 	case MTNOP:
 		ide_tape_discard_merge_buffer(drive, 0);
@@ -1358,9 +1356,11 @@
 			    mt_count % tape->blk_size)
 				return -EIO;
 			tape->user_bs_factor = mt_count / tape->blk_size;
-			clear_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags);
+			clear_bit(ilog2(IDE_AFLAG_DETECT_BS),
+				  &drive->atapi_flags);
 		} else
-			set_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags);
+			set_bit(ilog2(IDE_AFLAG_DETECT_BS),
+				&drive->atapi_flags);
 		return 0;
 	case MTSEEK:
 		ide_tape_discard_merge_buffer(drive, 0);
@@ -1486,7 +1486,7 @@
 		return -ENXIO;
 
 	lock_kernel();
-	tape = ide_tape_chrdev_get(i);
+	tape = ide_tape_get(NULL, true, i);
 	if (!tape) {
 		unlock_kernel();
 		return -ENXIO;
@@ -1505,20 +1505,20 @@
 
 	filp->private_data = tape;
 
-	if (test_and_set_bit(IDE_AFLAG_BUSY, &drive->atapi_flags)) {
+	if (test_and_set_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags)) {
 		retval = -EBUSY;
 		goto out_put_tape;
 	}
 
 	retval = idetape_wait_ready(drive, 60 * HZ);
 	if (retval) {
-		clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
+		clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
 		printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
 		goto out_put_tape;
 	}
 
 	idetape_read_position(drive);
-	if (!test_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags))
+	if (!test_bit(ilog2(IDE_AFLAG_ADDRESS_VALID), &drive->atapi_flags))
 		(void)idetape_rewind_tape(drive);
 
 	/* Read block size and write protect status from drive. */
@@ -1534,7 +1534,7 @@
 	if (tape->write_prot) {
 		if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
 		    (filp->f_flags & O_ACCMODE) == O_RDWR) {
-			clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
+			clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
 			retval = -EROFS;
 			goto out_put_tape;
 		}
@@ -1591,15 +1591,17 @@
 			ide_tape_discard_merge_buffer(drive, 1);
 	}
 
-	if (minor < 128 && test_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags))
+	if (minor < 128 && test_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT),
+				    &drive->atapi_flags))
 		(void) idetape_rewind_tape(drive);
+
 	if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
 		if (tape->door_locked == DOOR_LOCKED) {
 			if (!ide_set_media_lock(drive, tape->disk, 0))
 				tape->door_locked = DOOR_UNLOCKED;
 		}
 	}
-	clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
+	clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
 	ide_tape_put(tape);
 	unlock_kernel();
 	return 0;
@@ -1905,7 +1907,7 @@
 
 static int idetape_open(struct block_device *bdev, fmode_t mode)
 {
-	struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk);
+	struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk, false, 0);
 
 	if (!tape)
 		return -ENXIO;
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index a0c3e1b..75b85a8 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -98,7 +98,6 @@
 	if ((cmd->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
 		ide_tf_dump(drive->name, cmd);
 		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-		SELECT_MASK(drive, 0);
 
 		if (cmd->ftf_flags & IDE_FTFLAG_OUT_DATA) {
 			u8 data[2] = { cmd->tf.data, cmd->hob.data };
@@ -166,7 +165,7 @@
 	if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
 		if (custom && tf->command == ATA_CMD_SET_MULTI) {
 			drive->mult_req = drive->mult_count = 0;
-			drive->special.b.recalibrate = 1;
+			drive->special_flags |= IDE_SFLAG_RECALIBRATE;
 			(void)ide_dump_status(drive, __func__, stat);
 			return ide_stopped;
 		} else if (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) {
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 92c9b90..16d0569 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -211,6 +211,11 @@
 module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0);
 MODULE_PARM_DESC(noflush, "disable flush requests for a device");
 
+static unsigned int ide_nohpa;
+
+module_param_call(nohpa, ide_set_dev_param_mask, NULL, &ide_nohpa, 0);
+MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device");
+
 static unsigned int ide_noprobe;
 
 module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0);
@@ -281,6 +286,11 @@
 				 drive->name);
 		drive->dev_flags |= IDE_DFLAG_NOFLUSH;
 	}
+	if (ide_nohpa & (1 << i)) {
+		printk(KERN_INFO "ide: disabling Host Protected Area for %s\n",
+				 drive->name);
+		drive->dev_flags |= IDE_DFLAG_NOHPA;
+	}
 	if (ide_noprobe & (1 << i)) {
 		printk(KERN_INFO "ide: skipping probe for %s\n", drive->name);
 		drive->dev_flags |= IDE_DFLAG_NOPROBE;
diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c
index 051b4ab..ee9b55e 100644
--- a/drivers/ide/ide_platform.c
+++ b/drivers/ide/ide_platform.c
@@ -21,7 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-static void __devinit plat_ide_setup_ports(hw_regs_t *hw,
+static void __devinit plat_ide_setup_ports(struct ide_hw *hw,
 					   void __iomem *base,
 					   void __iomem *ctrl,
 					   struct pata_platform_info *pdata,
@@ -40,12 +40,11 @@
 	hw->io_ports.ctl_addr = (unsigned long)ctrl;
 
 	hw->irq = irq;
-
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info platform_ide_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
 static int __devinit plat_ide_probe(struct platform_device *pdev)
@@ -55,7 +54,7 @@
 	struct pata_platform_info *pdata;
 	struct ide_host *host;
 	int ret = 0, mmio = 0;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_port_info d = platform_ide_port_info;
 
 	pdata = pdev->dev.platform_data;
@@ -99,7 +98,7 @@
 	if (mmio)
 		d.host_flags |= IDE_HFLAG_MMIO;
 
-	ret = ide_host_add(&d, hws, &host);
+	ret = ide_host_add(&d, hws, 1, &host);
 	if (ret)
 		goto out;
 
diff --git a/drivers/ide/macide.c b/drivers/ide/macide.c
index 4b1718e..1447c8c 100644
--- a/drivers/ide/macide.c
+++ b/drivers/ide/macide.c
@@ -62,7 +62,7 @@
 	return 0;
 }
 
-static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base,
+static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
 				      int irq, ide_ack_intr_t *ack_intr)
 {
 	int i;
@@ -76,13 +76,12 @@
 
 	hw->irq = irq;
 	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info macide_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
 static const char *mac_ide_name[] =
@@ -97,7 +96,7 @@
 	ide_ack_intr_t *ack_intr;
 	unsigned long base;
 	int irq;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	if (!MACH_IS_MAC)
 		return -ENODEV;
@@ -127,7 +126,7 @@
 
 	macide_setup_ports(&hw, base, irq, ack_intr);
 
-	return ide_host_add(&macide_port_info, hws, NULL);
+	return ide_host_add(&macide_port_info, hws, 1, NULL);
 }
 
 module_init(macide_init);
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index 09d813d..3c1dc01 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -306,6 +306,7 @@
 	.host_flags		= IDE_HFLAG_MMIO,
 	.pio_mask		= ATA_PIO4,
 	.mwdma_mask		= ATA_MWDMA2,
+	.chipset		= ide_palm3710,
 };
 
 static int __init palm_bk3710_probe(struct platform_device *pdev)
@@ -315,7 +316,7 @@
 	void __iomem *base;
 	unsigned long rate, mem_size;
 	int i, rc;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	clk = clk_get(&pdev->dev, "IDECLK");
 	if (IS_ERR(clk))
@@ -363,13 +364,12 @@
 			(base + IDE_PALM_ATA_PRI_CTL_OFFSET);
 	hw.irq = irq->start;
 	hw.dev = &pdev->dev;
-	hw.chipset = ide_palm3710;
 
 	palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
 							     ATA_UDMA5;
 
 	/* Register the IDE interface with Linux */
-	rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
+	rc = ide_host_add(&palm_bk3710_port_info, hws, 1, NULL);
 	if (rc)
 		goto out;
 
diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c
index b68906c..65ba823 100644
--- a/drivers/ide/pdc202xx_new.c
+++ b/drivers/ide/pdc202xx_new.c
@@ -40,18 +40,6 @@
 #define DBG(fmt, args...)
 #endif
 
-static const char *pdc_quirk_drives[] = {
-	"QUANTUM FIREBALLlct08 08",
-	"QUANTUM FIREBALLP KA6.4",
-	"QUANTUM FIREBALLP KA9.1",
-	"QUANTUM FIREBALLP LM20.4",
-	"QUANTUM FIREBALLP KX13.6",
-	"QUANTUM FIREBALLP KX20.5",
-	"QUANTUM FIREBALLP KX27.3",
-	"QUANTUM FIREBALLP LM20.5",
-	NULL
-};
-
 static u8 max_dma_rate(struct pci_dev *pdev)
 {
 	u8 mode;
@@ -200,19 +188,6 @@
 		return ATA_CBL_PATA80;
 }
 
-static void pdcnew_quirkproc(ide_drive_t *drive)
-{
-	const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
-
-	for (list = pdc_quirk_drives; *list != NULL; list++)
-		if (strstr(m, *list) != NULL) {
-			drive->quirk_list = 2;
-			return;
-		}
-
-	drive->quirk_list = 0;
-}
-
 static void pdcnew_reset(ide_drive_t *drive)
 {
 	/*
@@ -473,7 +448,6 @@
 static const struct ide_port_ops pdcnew_port_ops = {
 	.set_pio_mode		= pdcnew_set_pio_mode,
 	.set_dma_mode		= pdcnew_set_dma_mode,
-	.quirkproc		= pdcnew_quirkproc,
 	.resetproc		= pdcnew_reset,
 	.cable_detect		= pdcnew_cable_detect,
 };
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index e24ecc8..b6abf7e 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -23,18 +23,6 @@
 
 #define PDC202XX_DEBUG_DRIVE_INFO	0
 
-static const char *pdc_quirk_drives[] = {
-	"QUANTUM FIREBALLlct08 08",
-	"QUANTUM FIREBALLP KA6.4",
-	"QUANTUM FIREBALLP KA9.1",
-	"QUANTUM FIREBALLP LM20.4",
-	"QUANTUM FIREBALLP KX13.6",
-	"QUANTUM FIREBALLP KX20.5",
-	"QUANTUM FIREBALLP KX27.3",
-	"QUANTUM FIREBALLP LM20.5",
-	NULL
-};
-
 static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
 
 static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
@@ -151,19 +139,6 @@
 	outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
 }
 
-static void pdc202xx_quirkproc(ide_drive_t *drive)
-{
-	const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
-
-	for (list = pdc_quirk_drives; *list != NULL; list++)
-		if (strstr(m, *list) != NULL) {
-			drive->quirk_list = 2;
-			return;
-		}
-
-	drive->quirk_list = 0;
-}
-
 static void pdc202xx_dma_start(ide_drive_t *drive)
 {
 	if (drive->current_speed > XFER_UDMA_2)
@@ -203,52 +178,6 @@
 	return ide_dma_end(drive);
 }
 
-static int pdc202xx_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= drive->hwif;
-	unsigned long high_16	= hwif->extra_base - 16;
-	u8 dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
-	u8 sc1d			= inb(high_16 + 0x001d);
-
-	if (hwif->channel) {
-		/* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */
-		if ((sc1d & 0x50) == 0x50)
-			goto somebody_else;
-		else if ((sc1d & 0x40) == 0x40)
-			return (dma_stat & 4) == 4;
-	} else {
-		/* bit3: Error, bit2: Interrupting, bit1: FIFO Full, bit0: FIFO Empty */
-		if ((sc1d & 0x05) == 0x05)
-			goto somebody_else;
-		else if ((sc1d & 0x04) == 0x04)
-			return (dma_stat & 4) == 4;
-	}
-somebody_else:
-	return (dma_stat & 4) == 4;	/* return 1 if INTR asserted */
-}
-
-static void pdc202xx_reset(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= drive->hwif;
-	unsigned long high_16	= hwif->extra_base - 16;
-	u8 udma_speed_flag	= inb(high_16 | 0x001f);
-
-	printk(KERN_WARNING "PDC202xx: software reset...\n");
-
-	outb(udma_speed_flag | 0x10, high_16 | 0x001f);
-	mdelay(100);
-	outb(udma_speed_flag & ~0x10, high_16 | 0x001f);
-	mdelay(2000);	/* 2 seconds ?! */
-
-	ide_set_max_pio(drive);
-}
-
-static void pdc202xx_dma_lost_irq(ide_drive_t *drive)
-{
-	pdc202xx_reset(drive);
-	ide_dma_lost_irq(drive);
-}
-
 static int init_chipset_pdc202xx(struct pci_dev *dev)
 {
 	unsigned long dmabase = pci_resource_start(dev, 4);
@@ -302,37 +231,22 @@
 static const struct ide_port_ops pdc20246_port_ops = {
 	.set_pio_mode		= pdc202xx_set_pio_mode,
 	.set_dma_mode		= pdc202xx_set_mode,
-	.quirkproc		= pdc202xx_quirkproc,
 };
 
 static const struct ide_port_ops pdc2026x_port_ops = {
 	.set_pio_mode		= pdc202xx_set_pio_mode,
 	.set_dma_mode		= pdc202xx_set_mode,
-	.quirkproc		= pdc202xx_quirkproc,
-	.resetproc		= pdc202xx_reset,
 	.cable_detect		= pdc2026x_cable_detect,
 };
 
-static const struct ide_dma_ops pdc20246_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_start		= ide_dma_start,
-	.dma_end		= ide_dma_end,
-	.dma_test_irq		= pdc202xx_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_sff_read_status	= ide_dma_sff_read_status,
-};
-
 static const struct ide_dma_ops pdc2026x_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
 	.dma_start		= pdc202xx_dma_start,
 	.dma_end		= pdc202xx_dma_end,
-	.dma_test_irq		= pdc202xx_dma_test_irq,
-	.dma_lost_irq		= pdc202xx_dma_lost_irq,
+	.dma_test_irq		= ide_dma_test_irq,
+	.dma_lost_irq		= ide_dma_lost_irq,
 	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_clear		= pdc202xx_reset,
 	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
 
@@ -354,7 +268,7 @@
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_pdc202xx,
 		.port_ops	= &pdc20246_port_ops,
-		.dma_ops	= &pdc20246_dma_ops,
+		.dma_ops	= &sff_dma_ops,
 		.host_flags	= IDE_HFLAGS_PDC202XX,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index f76e4e6..97642a7a 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1023,13 +1023,14 @@
  * Setup, register & probe an IDE channel driven by this driver, this is
  * called by one of the 2 probe functions (macio or PCI).
  */
-static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
+static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif,
+					   struct ide_hw *hw)
 {
 	struct device_node *np = pmif->node;
 	const int *bidp;
 	struct ide_host *host;
 	ide_hwif_t *hwif;
-	hw_regs_t *hws[] = { hw, NULL, NULL, NULL };
+	struct ide_hw *hws[] = { hw };
 	struct ide_port_info d = pmac_port_info;
 	int rc;
 
@@ -1077,7 +1078,7 @@
 	/* Make sure we have sane timings */
 	sanitize_timings(pmif);
 
-	host = ide_host_alloc(&d, hws);
+	host = ide_host_alloc(&d, hws, 1);
 	if (host == NULL)
 		return -ENOMEM;
 	hwif = host->ports[0];
@@ -1124,7 +1125,7 @@
 	return 0;
 }
 
-static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base)
+static void __devinit pmac_ide_init_ports(struct ide_hw *hw, unsigned long base)
 {
 	int i;
 
@@ -1144,7 +1145,7 @@
 	unsigned long regbase;
 	pmac_ide_hwif_t *pmif;
 	int irq, rc;
-	hw_regs_t hw;
+	struct ide_hw hw;
 
 	pmif = kzalloc(sizeof(*pmif), GFP_KERNEL);
 	if (pmif == NULL)
@@ -1268,7 +1269,7 @@
 	void __iomem *base;
 	unsigned long rbase, rlen;
 	int rc;
-	hw_regs_t hw;
+	struct ide_hw hw;
 
 	np = pci_device_to_OF_node(pdev);
 	if (np == NULL) {
diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c
index c793466..ab49a97 100644
--- a/drivers/ide/q40ide.c
+++ b/drivers/ide/q40ide.c
@@ -51,11 +51,11 @@
 /*
  * Addresses are pretranslated for Q40 ISA access.
  */
-static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base,
+static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base,
 			ide_ack_intr_t *ack_intr,
 			int irq)
 {
-	memset(hw, 0, sizeof(hw_regs_t));
+	memset(hw, 0, sizeof(*hw));
 	/* BIG FAT WARNING: 
 	   assumption: only DATA port is ever used in 16 bit mode */
 	hw->io_ports.data_addr = Q40_ISA_IO_W(base);
@@ -70,8 +70,6 @@
 
 	hw->irq = irq;
 	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
 }
 
 static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
@@ -119,6 +117,7 @@
 	.tp_ops			= &q40ide_tp_ops,
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
 /* 
@@ -136,7 +135,7 @@
 static int __init q40ide_init(void)
 {
     int i;
-    hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
+    struct ide_hw hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL };
 
     if (!MACH_IS_Q40)
       return -ENODEV;
@@ -163,7 +162,7 @@
 	hws[i] = &hw[i];
     }
 
-    return ide_host_add(&q40ide_port_info, hws, NULL);
+    return ide_host_add(&q40ide_port_info, hws, Q40IDE_NUM_HWIFS, NULL);
 }
 
 module_init(q40ide_init);
diff --git a/drivers/ide/rapide.c b/drivers/ide/rapide.c
index d5003ca..00f5424 100644
--- a/drivers/ide/rapide.c
+++ b/drivers/ide/rapide.c
@@ -13,9 +13,10 @@
 
 static const struct ide_port_info rapide_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
-static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base,
+static void rapide_setup_ports(struct ide_hw *hw, void __iomem *base,
 			       void __iomem *ctrl, unsigned int sz, int irq)
 {
 	unsigned long port = (unsigned long)base;
@@ -35,7 +36,7 @@
 	void __iomem *base;
 	struct ide_host *host;
 	int ret;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	ret = ecard_request_resources(ec);
 	if (ret)
@@ -49,10 +50,9 @@
 
 	memset(&hw, 0, sizeof(hw));
 	rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq);
-	hw.chipset = ide_generic;
 	hw.dev = &ec->dev;
 
-	ret = ide_host_add(&rapide_port_info, hws, &host);
+	ret = ide_host_add(&rapide_port_info, hws, 1, &host);
 	if (ret)
 		goto release;
 
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
index 5be41f2..1104bb3 100644
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -559,7 +559,7 @@
 {
 	struct scc_ports *ports = pci_get_drvdata(dev);
 	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	int i, rc;
 
 	memset(&hw, 0, sizeof(hw));
@@ -567,9 +567,8 @@
 		hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
 	hw.irq = dev->irq;
 	hw.dev = &dev->dev;
-	hw.chipset = ide_pci;
 
-	rc = ide_host_add(d, hws, &host);
+	rc = ide_host_add(d, hws, 1, &host);
 	if (rc)
 		return rc;
 
@@ -823,6 +822,7 @@
 	.host_flags	= IDE_HFLAG_SINGLE,
 	.irq_flags	= IRQF_SHARED,
 	.pio_mask	= ATA_PIO4,
+	.chipset	= ide_pci,
 };
 
 /**
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 7a3a12d..ab3db61 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -1,7 +1,7 @@
 /*
  *  Copyright (C) 1998-2000  Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 1995-1998  Mark Lord
- *  Copyright (C)      2007  Bartlomiej Zolnierkiewicz
+ *  Copyright (C) 2007-2009  Bartlomiej Zolnierkiewicz
  *
  *  May be copied or modified under the terms of the GNU General Public License
  */
@@ -301,11 +301,11 @@
 }
 
 /**
- *	ide_hw_configure	-	configure a hw_regs_t instance
+ *	ide_hw_configure	-	configure a struct ide_hw instance
  *	@dev: PCI device holding interface
  *	@d: IDE port info
  *	@port: port number
- *	@hw: hw_regs_t instance corresponding to this port
+ *	@hw: struct ide_hw instance corresponding to this port
  *
  *	Perform the initial set up for the hardware interface structure. This
  *	is done per interface port rather than per PCI device. There may be
@@ -315,7 +315,7 @@
  */
 
 static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
-			    unsigned int port, hw_regs_t *hw)
+			    unsigned int port, struct ide_hw *hw)
 {
 	unsigned long ctl = 0, base = 0;
 
@@ -344,7 +344,6 @@
 
 	memset(hw, 0, sizeof(*hw));
 	hw->dev = &dev->dev;
-	hw->chipset = d->chipset ? d->chipset : ide_pci;
 	ide_std_init_ports(hw, base, ctl | 2);
 
 	return 0;
@@ -446,8 +445,8 @@
  *	ide_pci_setup_ports	-	configure ports/devices on PCI IDE
  *	@dev: PCI device
  *	@d: IDE port info
- *	@hw: hw_regs_t instances corresponding to this PCI IDE device
- *	@hws: hw_regs_t pointers table to update
+ *	@hw: struct ide_hw instances corresponding to this PCI IDE device
+ *	@hws: struct ide_hw pointers table to update
  *
  *	Scan the interfaces attached to this device and do any
  *	necessary per port setup. Attach the devices and ask the
@@ -459,7 +458,7 @@
  */
 
 void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
-			 hw_regs_t *hw, hw_regs_t **hws)
+			 struct ide_hw *hw, struct ide_hw **hws)
 {
 	int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
 	u8 tmp;
@@ -535,61 +534,15 @@
 	return ret;
 }
 
-int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
-		     void *priv)
-{
-	struct ide_host *host;
-	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
-	int ret;
-
-	ret = ide_setup_pci_controller(dev, d, 1);
-	if (ret < 0)
-		goto out;
-
-	ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
-
-	host = ide_host_alloc(d, hws);
-	if (host == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	host->dev[0] = &dev->dev;
-
-	host->host_priv = priv;
-
-	host->irq_flags = IRQF_SHARED;
-
-	pci_set_drvdata(dev, host);
-
-	ret = do_ide_setup_pci_device(dev, d, 1);
-	if (ret < 0)
-		goto out;
-
-	/* fixup IRQ */
-	if (ide_pci_is_in_compatibility_mode(dev)) {
-		hw[0].irq = pci_get_legacy_ide_irq(dev, 0);
-		hw[1].irq = pci_get_legacy_ide_irq(dev, 1);
-	} else
-		hw[1].irq = hw[0].irq = ret;
-
-	ret = ide_host_register(host, d, hws);
-	if (ret)
-		ide_host_free(host);
-out:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(ide_pci_init_one);
-
 int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
 		     const struct ide_port_info *d, void *priv)
 {
 	struct pci_dev *pdev[] = { dev1, dev2 };
 	struct ide_host *host;
-	int ret, i;
-	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
+	int ret, i, n_ports = dev2 ? 4 : 2;
+	struct ide_hw hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < n_ports / 2; i++) {
 		ret = ide_setup_pci_controller(pdev[i], d, !i);
 		if (ret < 0)
 			goto out;
@@ -597,23 +550,24 @@
 		ide_pci_setup_ports(pdev[i], d, &hw[i*2], &hws[i*2]);
 	}
 
-	host = ide_host_alloc(d, hws);
+	host = ide_host_alloc(d, hws, n_ports);
 	if (host == NULL) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
 	host->dev[0] = &dev1->dev;
-	host->dev[1] = &dev2->dev;
+	if (dev2)
+		host->dev[1] = &dev2->dev;
 
 	host->host_priv = priv;
-
 	host->irq_flags = IRQF_SHARED;
 
 	pci_set_drvdata(pdev[0], host);
-	pci_set_drvdata(pdev[1], host);
+	if (dev2)
+		pci_set_drvdata(pdev[1], host);
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < n_ports / 2; i++) {
 		ret = do_ide_setup_pci_device(pdev[i], d, !i);
 
 		/*
@@ -639,6 +593,13 @@
 }
 EXPORT_SYMBOL_GPL(ide_pci_init_two);
 
+int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
+		     void *priv)
+{
+	return ide_pci_init_two(dev, NULL, d, priv);
+}
+EXPORT_SYMBOL_GPL(ide_pci_init_one);
+
 void ide_pci_remove(struct pci_dev *dev)
 {
 	struct ide_host *host = pci_get_drvdata(dev);
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
index e5d2a48..5f37f16 100644
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -91,7 +91,7 @@
 
 
 static void
-sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
+sgiioc4_init_hwif_ports(struct ide_hw *hw, unsigned long data_port,
 			unsigned long ctrl_port, unsigned long irq_port)
 {
 	unsigned long reg = data_port;
@@ -546,7 +546,7 @@
 	unsigned long cmd_base, irqport;
 	unsigned long bar0, cmd_phys_base, ctl;
 	void __iomem *virt_base;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	int rc;
 
 	/*  Get the CmdBlk and CtrlBlk Base Registers */
@@ -575,13 +575,12 @@
 	memset(&hw, 0, sizeof(hw));
 	sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
 	hw.irq = dev->irq;
-	hw.chipset = ide_pci;
 	hw.dev = &dev->dev;
 
 	/* Initializing chipset IRQ Registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
-	rc = ide_host_add(&sgiioc4_port_info, hws, NULL);
+	rc = ide_host_add(&sgiioc4_port_info, hws, 1, NULL);
 	if (!rc)
 		return 0;
 
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
index e4973cd..bd82d22 100644
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -451,8 +451,8 @@
 static void sil_sata_pre_reset(ide_drive_t *drive)
 {
 	if (drive->media == ide_disk) {
-		drive->special.b.set_geometry = 0;
-		drive->special.b.recalibrate = 0;
+		drive->special_flags &=
+			~(IDE_SFLAG_SET_GEOMETRY | IDE_SFLAG_RECALIBRATE);
 	}
 }
 
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index b0a4606..0924abf 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -10,7 +10,7 @@
  * with the timing registers setup.
  *  -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org
  *
- * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2006-2007,2009 MontaVista Software, Inc. <source@mvista.com>
  * Copyright (C)      2007 Bartlomiej Zolnierkiewicz
  */
 
@@ -146,14 +146,15 @@
 	u32 val, mask		= hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
 	u8 dma_cmd;
 
-	printk("sl82c105: lost IRQ, resetting host\n");
+	printk(KERN_WARNING "sl82c105: lost IRQ, resetting host\n");
 
 	/*
 	 * Check the raw interrupt from the drive.
 	 */
 	pci_read_config_dword(dev, 0x40, &val);
 	if (val & mask)
-		printk("sl82c105: drive was requesting IRQ, but host lost it\n");
+		printk(KERN_INFO "sl82c105: drive was requesting IRQ, "
+		       "but host lost it\n");
 
 	/*
 	 * Was DMA enabled?  If so, disable it - we're resetting the
@@ -162,7 +163,7 @@
 	dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
 	if (dma_cmd & 1) {
 		outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
-		printk("sl82c105: DMA was enabled\n");
+		printk(KERN_INFO "sl82c105: DMA was enabled\n");
 	}
 
 	sl82c105_reset_host(dev);
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index e33d764..ea89fdd 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -130,8 +130,7 @@
 
 static int __init tx4938ide_probe(struct platform_device *pdev)
 {
-	hw_regs_t hw;
-	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_host *host;
 	struct resource *res;
 	struct tx4938ide_platform_info *pdata = pdev->dev.platform_data;
@@ -183,7 +182,7 @@
 		tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, 0);
 	else
 		d.port_ops = NULL;
-	ret = ide_host_add(&d, hws, &host);
+	ret = ide_host_add(&d, hws, 1, &host);
 	if (!ret)
 		platform_set_drvdata(pdev, host);
 	return ret;
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 5ca7622..64b58ec 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -537,8 +537,7 @@
 
 static int __init tx4939ide_probe(struct platform_device *pdev)
 {
-	hw_regs_t hw;
-	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_host *host;
 	struct resource *res;
 	int irq, ret;
@@ -581,7 +580,7 @@
 	hw.dev = &pdev->dev;
 
 	pr_info("TX4939 IDE interface (base %#lx, irq %d)\n", mapbase, irq);
-	host = ide_host_alloc(&tx4939ide_port_info, hws);
+	host = ide_host_alloc(&tx4939ide_port_info, hws, 1);
 	if (!host)
 		return -ENOMEM;
 	/* use extra_base for base address of the all registers */
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 75223f5..0ba6ec8 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -257,11 +257,8 @@
 {
 	struct iscsi_iser_task *iser_task = task->dd_data;
 
-	/*
-	 * mgmt tasks do not need special cleanup and we do not
-	 * allocate anything in the init task callout
-	 */
-	if (!task->sc || task->state == ISCSI_TASK_PENDING)
+	/* mgmt tasks do not need special cleanup */
+	if (!task->sc)
 		return;
 
 	if (iser_task->status == ISER_TASK_STATUS_STARTED) {
@@ -517,7 +514,8 @@
 }
 
 static struct iscsi_endpoint *
-iscsi_iser_ep_connect(struct sockaddr *dst_addr, int non_blocking)
+iscsi_iser_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
+		      int non_blocking)
 {
 	int err;
 	struct iser_conn *ib_conn;
diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
index a3d3cba..0aaa059 100644
--- a/drivers/lguest/Kconfig
+++ b/drivers/lguest/Kconfig
@@ -1,6 +1,6 @@
 config LGUEST
 	tristate "Linux hypervisor example code"
-	depends on X86_32 && EXPERIMENTAL && !X86_PAE && FUTEX
+	depends on X86_32 && EXPERIMENTAL && EVENTFD
 	select HVC_DRIVER
 	---help---
 	  This is a very simple module which allows you to run
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 4845fb3..a6974e9 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -95,7 +95,7 @@
 	 * array of struct pages.  It increments that pointer, but we don't
 	 * care. */
 	pagep = switcher_page;
-	err = map_vm_area(switcher_vma, PAGE_KERNEL, &pagep);
+	err = map_vm_area(switcher_vma, PAGE_KERNEL_EXEC, &pagep);
 	if (err) {
 		printk("lguest: map_vm_area failed: %i\n", err);
 		goto free_vma;
@@ -188,6 +188,9 @@
 {
 	/* We stop running once the Guest is dead. */
 	while (!cpu->lg->dead) {
+		unsigned int irq;
+		bool more;
+
 		/* First we run any hypercalls the Guest wants done. */
 		if (cpu->hcall)
 			do_hypercalls(cpu);
@@ -195,23 +198,23 @@
 		/* It's possible the Guest did a NOTIFY hypercall to the
 		 * Launcher, in which case we return from the read() now. */
 		if (cpu->pending_notify) {
-			if (put_user(cpu->pending_notify, user))
-				return -EFAULT;
-			return sizeof(cpu->pending_notify);
+			if (!send_notify_to_eventfd(cpu)) {
+				if (put_user(cpu->pending_notify, user))
+					return -EFAULT;
+				return sizeof(cpu->pending_notify);
+			}
 		}
 
 		/* Check for signals */
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
-		/* If Waker set break_out, return to Launcher. */
-		if (cpu->break_out)
-			return -EAGAIN;
-
 		/* Check if there are any interrupts which can be delivered now:
 		 * if so, this sets up the hander to be executed when we next
 		 * run the Guest. */
-		maybe_do_interrupt(cpu);
+		irq = interrupt_pending(cpu, &more);
+		if (irq < LGUEST_IRQS)
+			try_deliver_interrupt(cpu, irq, more);
 
 		/* All long-lived kernel loops need to check with this horrible
 		 * thing called the freezer.  If the Host is trying to suspend,
@@ -224,10 +227,15 @@
 			break;
 
 		/* If the Guest asked to be stopped, we sleep.  The Guest's
-		 * clock timer or LHREQ_BREAK from the Waker will wake us. */
+		 * clock timer will wake us. */
 		if (cpu->halted) {
 			set_current_state(TASK_INTERRUPTIBLE);
-			schedule();
+			/* Just before we sleep, make sure no interrupt snuck in
+			 * which we should be doing. */
+			if (interrupt_pending(cpu, &more) < LGUEST_IRQS)
+				set_current_state(TASK_RUNNING);
+			else
+				schedule();
 			continue;
 		}
 
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index 54d66f0..c29ffa1 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -37,6 +37,10 @@
 		/* This call does nothing, except by breaking out of the Guest
 		 * it makes us process all the asynchronous hypercalls. */
 		break;
+	case LHCALL_SEND_INTERRUPTS:
+		/* This call does nothing too, but by breaking out of the Guest
+		 * it makes us process any pending interrupts. */
+		break;
 	case LHCALL_LGUEST_INIT:
 		/* You can't get here unless you're already initialized.  Don't
 		 * do that. */
@@ -73,11 +77,21 @@
 		guest_set_stack(cpu, args->arg1, args->arg2, args->arg3);
 		break;
 	case LHCALL_SET_PTE:
+#ifdef CONFIG_X86_PAE
+		guest_set_pte(cpu, args->arg1, args->arg2,
+				__pte(args->arg3 | (u64)args->arg4 << 32));
+#else
 		guest_set_pte(cpu, args->arg1, args->arg2, __pte(args->arg3));
+#endif
 		break;
+	case LHCALL_SET_PGD:
+		guest_set_pgd(cpu->lg, args->arg1, args->arg2);
+		break;
+#ifdef CONFIG_X86_PAE
 	case LHCALL_SET_PMD:
 		guest_set_pmd(cpu->lg, args->arg1, args->arg2);
 		break;
+#endif
 	case LHCALL_SET_CLOCKEVENT:
 		guest_set_clockevent(cpu, args->arg1);
 		break;
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 6e99adb..0e9067b 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -128,30 +128,39 @@
 /*H:205
  * Virtual Interrupts.
  *
- * maybe_do_interrupt() gets called before every entry to the Guest, to see if
- * we should divert the Guest to running an interrupt handler. */
-void maybe_do_interrupt(struct lg_cpu *cpu)
+ * interrupt_pending() returns the first pending interrupt which isn't blocked
+ * by the Guest.  It is called before every entry to the Guest, and just before
+ * we go to sleep when the Guest has halted itself. */
+unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
 {
 	unsigned int irq;
 	DECLARE_BITMAP(blk, LGUEST_IRQS);
-	struct desc_struct *idt;
 
 	/* If the Guest hasn't even initialized yet, we can do nothing. */
 	if (!cpu->lg->lguest_data)
-		return;
+		return LGUEST_IRQS;
 
 	/* Take our "irqs_pending" array and remove any interrupts the Guest
 	 * wants blocked: the result ends up in "blk". */
 	if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
 			   sizeof(blk)))
-		return;
+		return LGUEST_IRQS;
 	bitmap_andnot(blk, cpu->irqs_pending, blk, LGUEST_IRQS);
 
 	/* Find the first interrupt. */
 	irq = find_first_bit(blk, LGUEST_IRQS);
-	/* None?  Nothing to do */
-	if (irq >= LGUEST_IRQS)
-		return;
+	*more = find_next_bit(blk, LGUEST_IRQS, irq+1);
+
+	return irq;
+}
+
+/* This actually diverts the Guest to running an interrupt handler, once an
+ * interrupt has been identified by interrupt_pending(). */
+void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
+{
+	struct desc_struct *idt;
+
+	BUG_ON(irq >= LGUEST_IRQS);
 
 	/* They may be in the middle of an iret, where they asked us never to
 	 * deliver interrupts. */
@@ -170,8 +179,12 @@
 		u32 irq_enabled;
 		if (get_user(irq_enabled, &cpu->lg->lguest_data->irq_enabled))
 			irq_enabled = 0;
-		if (!irq_enabled)
+		if (!irq_enabled) {
+			/* Make sure they know an IRQ is pending. */
+			put_user(X86_EFLAGS_IF,
+				 &cpu->lg->lguest_data->irq_pending);
 			return;
+		}
 	}
 
 	/* Look at the IDT entry the Guest gave us for this interrupt.  The
@@ -194,6 +207,25 @@
 	 * here is a compromise which means at least it gets updated every
 	 * timer interrupt. */
 	write_timestamp(cpu);
+
+	/* If there are no other interrupts we want to deliver, clear
+	 * the pending flag. */
+	if (!more)
+		put_user(0, &cpu->lg->lguest_data->irq_pending);
+}
+
+/* And this is the routine when we want to set an interrupt for the Guest. */
+void set_interrupt(struct lg_cpu *cpu, unsigned int irq)
+{
+	/* Next time the Guest runs, the core code will see if it can deliver
+	 * this interrupt. */
+	set_bit(irq, cpu->irqs_pending);
+
+	/* Make sure it sees it; it might be asleep (eg. halted), or
+	 * running the Guest right now, in which case kick_process()
+	 * will knock it out. */
+	if (!wake_up_process(cpu->tsk))
+		kick_process(cpu->tsk);
 }
 /*:*/
 
@@ -510,10 +542,7 @@
 	struct lg_cpu *cpu = container_of(timer, struct lg_cpu, hrt);
 
 	/* Remember the first interrupt is the timer interrupt. */
-	set_bit(0, cpu->irqs_pending);
-	/* If the Guest is actually stopped, we need to wake it up. */
-	if (cpu->halted)
-		wake_up_process(cpu->tsk);
+	set_interrupt(cpu, 0);
 	return HRTIMER_NORESTART;
 }
 
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index af92a17..d4e8979 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -49,7 +49,7 @@
 	u32 cr2;
 	int ts;
 	u32 esp1;
-	u8 ss1;
+	u16 ss1;
 
 	/* Bitmap of what has changed: see CHANGED_* above. */
 	int changed;
@@ -71,9 +71,7 @@
 	/* Virtual clock device */
 	struct hrtimer hrt;
 
-	/* Do we need to stop what we're doing and return to userspace? */
-	int break_out;
-	wait_queue_head_t break_wq;
+	/* Did the Guest tell us to halt? */
 	int halted;
 
 	/* Pending virtual interrupts */
@@ -82,6 +80,16 @@
 	struct lg_cpu_arch arch;
 };
 
+struct lg_eventfd {
+	unsigned long addr;
+	struct file *event;
+};
+
+struct lg_eventfd_map {
+	unsigned int num;
+	struct lg_eventfd map[];
+};
+
 /* The private info the thread maintains about the guest. */
 struct lguest
 {
@@ -102,6 +110,8 @@
 	unsigned int stack_pages;
 	u32 tsc_khz;
 
+	struct lg_eventfd_map *eventfds;
+
 	/* Dead? */
 	const char *dead;
 };
@@ -137,9 +147,13 @@
  * in the kernel. */
 #define pgd_flags(x)	(pgd_val(x) & ~PAGE_MASK)
 #define pgd_pfn(x)	(pgd_val(x) >> PAGE_SHIFT)
+#define pmd_flags(x)    (pmd_val(x) & ~PAGE_MASK)
+#define pmd_pfn(x)	(pmd_val(x) >> PAGE_SHIFT)
 
 /* interrupts_and_traps.c: */
-void maybe_do_interrupt(struct lg_cpu *cpu);
+unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more);
+void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more);
+void set_interrupt(struct lg_cpu *cpu, unsigned int irq);
 bool deliver_trap(struct lg_cpu *cpu, unsigned int num);
 void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int i,
 			  u32 low, u32 hi);
@@ -150,6 +164,7 @@
 void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
 		const unsigned long *def);
 void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta);
+bool send_notify_to_eventfd(struct lg_cpu *cpu);
 void init_clockdev(struct lg_cpu *cpu);
 bool check_syscall_vector(struct lguest *lg);
 int init_interrupts(void);
@@ -168,7 +183,10 @@
 int init_guest_pagetable(struct lguest *lg);
 void free_guest_pagetable(struct lguest *lg);
 void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable);
+void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 i);
+#ifdef CONFIG_X86_PAE
 void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 i);
+#endif
 void guest_pagetable_clear_all(struct lg_cpu *cpu);
 void guest_pagetable_flush_user(struct lg_cpu *cpu);
 void guest_set_pte(struct lg_cpu *cpu, unsigned long gpgdir,
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index df44d96..e082cda 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -228,7 +228,8 @@
  * function. */
 static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 				    unsigned index,
-				    void (*callback)(struct virtqueue *vq))
+				    void (*callback)(struct virtqueue *vq),
+				    const char *name)
 {
 	struct lguest_device *ldev = to_lgdev(vdev);
 	struct lguest_vq_info *lvq;
@@ -263,7 +264,7 @@
 	/* OK, tell virtio_ring.c to set up a virtqueue now we know its size
 	 * and we've got a pointer to its pages. */
 	vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN,
-				 vdev, lvq->pages, lg_notify, callback);
+				 vdev, lvq->pages, lg_notify, callback, name);
 	if (!vq) {
 		err = -ENOMEM;
 		goto unmap;
@@ -312,6 +313,38 @@
 	kfree(lvq);
 }
 
+static void lg_del_vqs(struct virtio_device *vdev)
+{
+	struct virtqueue *vq, *n;
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		lg_del_vq(vq);
+}
+
+static int lg_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+		       struct virtqueue *vqs[],
+		       vq_callback_t *callbacks[],
+		       const char *names[])
+{
+	struct lguest_device *ldev = to_lgdev(vdev);
+	int i;
+
+	/* We must have this many virtqueues. */
+	if (nvqs > ldev->desc->num_vq)
+		return -ENOENT;
+
+	for (i = 0; i < nvqs; ++i) {
+		vqs[i] = lg_find_vq(vdev, i, callbacks[i], names[i]);
+		if (IS_ERR(vqs[i]))
+			goto error;
+	}
+	return 0;
+
+error:
+	lg_del_vqs(vdev);
+	return PTR_ERR(vqs[i]);
+}
+
 /* The ops structure which hooks everything together. */
 static struct virtio_config_ops lguest_config_ops = {
 	.get_features = lg_get_features,
@@ -321,8 +354,8 @@
 	.get_status = lg_get_status,
 	.set_status = lg_set_status,
 	.reset = lg_reset,
-	.find_vq = lg_find_vq,
-	.del_vq = lg_del_vq,
+	.find_vqs = lg_find_vqs,
+	.del_vqs = lg_del_vqs,
 };
 
 /* The root device for the lguest virtio devices.  This makes them appear as
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index b8ee103..32e2971 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -7,32 +7,83 @@
 #include <linux/miscdevice.h>
 #include <linux/fs.h>
 #include <linux/sched.h>
+#include <linux/eventfd.h>
+#include <linux/file.h>
 #include "lg.h"
 
-/*L:055 When something happens, the Waker process needs a way to stop the
- * kernel running the Guest and return to the Launcher.  So the Waker writes
- * LHREQ_BREAK and the value "1" to /dev/lguest to do this.  Once the Launcher
- * has done whatever needs attention, it writes LHREQ_BREAK and "0" to release
- * the Waker. */
-static int break_guest_out(struct lg_cpu *cpu, const unsigned long __user*input)
+bool send_notify_to_eventfd(struct lg_cpu *cpu)
 {
-	unsigned long on;
+	unsigned int i;
+	struct lg_eventfd_map *map;
 
-	/* Fetch whether they're turning break on or off. */
-	if (get_user(on, input) != 0)
+	/* lg->eventfds is RCU-protected */
+	rcu_read_lock();
+	map = rcu_dereference(cpu->lg->eventfds);
+	for (i = 0; i < map->num; i++) {
+		if (map->map[i].addr == cpu->pending_notify) {
+			eventfd_signal(map->map[i].event, 1);
+			cpu->pending_notify = 0;
+			break;
+		}
+	}
+	rcu_read_unlock();
+	return cpu->pending_notify == 0;
+}
+
+static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
+{
+	struct lg_eventfd_map *new, *old = lg->eventfds;
+
+	if (!addr)
+		return -EINVAL;
+
+	/* Replace the old array with the new one, carefully: others can
+	 * be accessing it at the same time */
+	new = kmalloc(sizeof(*new) + sizeof(new->map[0]) * (old->num + 1),
+		      GFP_KERNEL);
+	if (!new)
+		return -ENOMEM;
+
+	/* First make identical copy. */
+	memcpy(new->map, old->map, sizeof(old->map[0]) * old->num);
+	new->num = old->num;
+
+	/* Now append new entry. */
+	new->map[new->num].addr = addr;
+	new->map[new->num].event = eventfd_fget(fd);
+	if (IS_ERR(new->map[new->num].event)) {
+		kfree(new);
+		return PTR_ERR(new->map[new->num].event);
+	}
+	new->num++;
+
+	/* Now put new one in place. */
+	rcu_assign_pointer(lg->eventfds, new);
+
+	/* We're not in a big hurry.  Wait until noone's looking at old
+	 * version, then delete it. */
+	synchronize_rcu();
+	kfree(old);
+
+	return 0;
+}
+
+static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
+{
+	unsigned long addr, fd;
+	int err;
+
+	if (get_user(addr, input) != 0)
+		return -EFAULT;
+	input++;
+	if (get_user(fd, input) != 0)
 		return -EFAULT;
 
-	if (on) {
-		cpu->break_out = 1;
-		/* Pop it out of the Guest (may be running on different CPU) */
-		wake_up_process(cpu->tsk);
-		/* Wait for them to reset it */
-		return wait_event_interruptible(cpu->break_wq, !cpu->break_out);
-	} else {
-		cpu->break_out = 0;
-		wake_up(&cpu->break_wq);
-		return 0;
-	}
+	mutex_lock(&lguest_lock);
+	err = add_eventfd(lg, addr, fd);
+	mutex_unlock(&lguest_lock);
+
+	return 0;
 }
 
 /*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
@@ -45,9 +96,8 @@
 		return -EFAULT;
 	if (irq >= LGUEST_IRQS)
 		return -EINVAL;
-	/* Next time the Guest runs, the core code will see if it can deliver
-	 * this interrupt. */
-	set_bit(irq, cpu->irqs_pending);
+
+	set_interrupt(cpu, irq);
 	return 0;
 }
 
@@ -126,9 +176,6 @@
 	 * address. */
 	lguest_arch_setup_regs(cpu, start_ip);
 
-	/* Initialize the queue for the Waker to wait on */
-	init_waitqueue_head(&cpu->break_wq);
-
 	/* We keep a pointer to the Launcher task (ie. current task) for when
 	 * other Guests want to wake this one (eg. console input). */
 	cpu->tsk = current;
@@ -185,6 +232,13 @@
 		goto unlock;
 	}
 
+	lg->eventfds = kmalloc(sizeof(*lg->eventfds), GFP_KERNEL);
+	if (!lg->eventfds) {
+		err = -ENOMEM;
+		goto free_lg;
+	}
+	lg->eventfds->num = 0;
+
 	/* Populate the easy fields of our "struct lguest" */
 	lg->mem_base = (void __user *)args[0];
 	lg->pfn_limit = args[1];
@@ -192,7 +246,7 @@
 	/* This is the first cpu (cpu 0) and it will start booting at args[2] */
 	err = lg_cpu_start(&lg->cpus[0], 0, args[2]);
 	if (err)
-		goto release_guest;
+		goto free_eventfds;
 
 	/* Initialize the Guest's shadow page tables, using the toplevel
 	 * address the Launcher gave us.  This allocates memory, so can fail. */
@@ -211,7 +265,9 @@
 free_regs:
 	/* FIXME: This should be in free_vcpu */
 	free_page(lg->cpus[0].regs_page);
-release_guest:
+free_eventfds:
+	kfree(lg->eventfds);
+free_lg:
 	kfree(lg);
 unlock:
 	mutex_unlock(&lguest_lock);
@@ -252,11 +308,6 @@
 		/* Once the Guest is dead, you can only read() why it died. */
 		if (lg->dead)
 			return -ENOENT;
-
-		/* If you're not the task which owns the Guest, all you can do
-		 * is break the Launcher out of running the Guest. */
-		if (current != cpu->tsk && req != LHREQ_BREAK)
-			return -EPERM;
 	}
 
 	switch (req) {
@@ -264,8 +315,8 @@
 		return initialize(file, input);
 	case LHREQ_IRQ:
 		return user_send_irq(cpu, input);
-	case LHREQ_BREAK:
-		return break_guest_out(cpu, input);
+	case LHREQ_EVENTFD:
+		return attach_eventfd(lg, input);
 	default:
 		return -EINVAL;
 	}
@@ -303,6 +354,12 @@
 		 * the Launcher's memory management structure. */
 		mmput(lg->cpus[i].mm);
 	}
+
+	/* Release any eventfds they registered. */
+	for (i = 0; i < lg->eventfds->num; i++)
+		fput(lg->eventfds->map[i].event);
+	kfree(lg->eventfds);
+
 	/* If lg->dead doesn't contain an error code it will be NULL or a
 	 * kmalloc()ed string, either of which is ok to hand to kfree(). */
 	if (!IS_ERR(lg->dead))
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index a059cf9..a6fe1ab 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -53,6 +53,17 @@
  * page.  */
 #define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1)
 
+/* For PAE we need the PMD index as well. We use the last 2MB, so we
+ * will need the last pmd entry of the last pmd page.  */
+#ifdef CONFIG_X86_PAE
+#define SWITCHER_PMD_INDEX 	(PTRS_PER_PMD - 1)
+#define RESERVE_MEM 		2U
+#define CHECK_GPGD_MASK		_PAGE_PRESENT
+#else
+#define RESERVE_MEM 		4U
+#define CHECK_GPGD_MASK		_PAGE_TABLE
+#endif
+
 /* We actually need a separate PTE page for each CPU.  Remember that after the
  * Switcher code itself comes two pages for each CPU, and we don't want this
  * CPU's guest to see the pages of any other CPU. */
@@ -73,24 +84,59 @@
 {
 	unsigned int index = pgd_index(vaddr);
 
+#ifndef CONFIG_X86_PAE
 	/* We kill any Guest trying to touch the Switcher addresses. */
 	if (index >= SWITCHER_PGD_INDEX) {
 		kill_guest(cpu, "attempt to access switcher pages");
 		index = 0;
 	}
+#endif
 	/* Return a pointer index'th pgd entry for the i'th page table. */
 	return &cpu->lg->pgdirs[i].pgdir[index];
 }
 
+#ifdef CONFIG_X86_PAE
+/* This routine then takes the PGD entry given above, which contains the
+ * address of the PMD page.  It then returns a pointer to the PMD entry for the
+ * given address. */
+static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
+{
+	unsigned int index = pmd_index(vaddr);
+	pmd_t *page;
+
+	/* We kill any Guest trying to touch the Switcher addresses. */
+	if (pgd_index(vaddr) == SWITCHER_PGD_INDEX &&
+					index >= SWITCHER_PMD_INDEX) {
+		kill_guest(cpu, "attempt to access switcher pages");
+		index = 0;
+	}
+
+	/* You should never call this if the PGD entry wasn't valid */
+	BUG_ON(!(pgd_flags(spgd) & _PAGE_PRESENT));
+	page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
+
+	return &page[index];
+}
+#endif
+
 /* This routine then takes the page directory entry returned above, which
  * contains the address of the page table entry (PTE) page.  It then returns a
  * pointer to the PTE entry for the given address. */
-static pte_t *spte_addr(pgd_t spgd, unsigned long vaddr)
+static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 {
+#ifdef CONFIG_X86_PAE
+	pmd_t *pmd = spmd_addr(cpu, spgd, vaddr);
+	pte_t *page = __va(pmd_pfn(*pmd) << PAGE_SHIFT);
+
+	/* You should never call this if the PMD entry wasn't valid */
+	BUG_ON(!(pmd_flags(*pmd) & _PAGE_PRESENT));
+#else
 	pte_t *page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
 	/* You should never call this if the PGD entry wasn't valid */
 	BUG_ON(!(pgd_flags(spgd) & _PAGE_PRESENT));
-	return &page[(vaddr >> PAGE_SHIFT) % PTRS_PER_PTE];
+#endif
+
+	return &page[pte_index(vaddr)];
 }
 
 /* These two functions just like the above two, except they access the Guest
@@ -101,12 +147,32 @@
 	return cpu->lg->pgdirs[cpu->cpu_pgd].gpgdir + index * sizeof(pgd_t);
 }
 
-static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
+#ifdef CONFIG_X86_PAE
+static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
 {
 	unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
 	BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
-	return gpage + ((vaddr>>PAGE_SHIFT) % PTRS_PER_PTE) * sizeof(pte_t);
+	return gpage + pmd_index(vaddr) * sizeof(pmd_t);
 }
+
+static unsigned long gpte_addr(struct lg_cpu *cpu,
+			       pmd_t gpmd, unsigned long vaddr)
+{
+	unsigned long gpage = pmd_pfn(gpmd) << PAGE_SHIFT;
+
+	BUG_ON(!(pmd_flags(gpmd) & _PAGE_PRESENT));
+	return gpage + pte_index(vaddr) * sizeof(pte_t);
+}
+#else
+static unsigned long gpte_addr(struct lg_cpu *cpu,
+				pgd_t gpgd, unsigned long vaddr)
+{
+	unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
+
+	BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
+	return gpage + pte_index(vaddr) * sizeof(pte_t);
+}
+#endif
 /*:*/
 
 /*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
@@ -171,7 +237,7 @@
 	/* Remember that get_user_pages_fast() took a reference to the page, in
 	 * get_pfn()?  We have to put it back now. */
 	if (pte_flags(pte) & _PAGE_PRESENT)
-		put_page(pfn_to_page(pte_pfn(pte)));
+		put_page(pte_page(pte));
 }
 /*:*/
 
@@ -184,11 +250,20 @@
 
 static void check_gpgd(struct lg_cpu *cpu, pgd_t gpgd)
 {
-	if ((pgd_flags(gpgd) & ~_PAGE_TABLE) ||
+	if ((pgd_flags(gpgd) & ~CHECK_GPGD_MASK) ||
 	   (pgd_pfn(gpgd) >= cpu->lg->pfn_limit))
 		kill_guest(cpu, "bad page directory entry");
 }
 
+#ifdef CONFIG_X86_PAE
+static void check_gpmd(struct lg_cpu *cpu, pmd_t gpmd)
+{
+	if ((pmd_flags(gpmd) & ~_PAGE_TABLE) ||
+	   (pmd_pfn(gpmd) >= cpu->lg->pfn_limit))
+		kill_guest(cpu, "bad page middle directory entry");
+}
+#endif
+
 /*H:330
  * (i) Looking up a page table entry when the Guest faults.
  *
@@ -207,6 +282,11 @@
 	pte_t gpte;
 	pte_t *spte;
 
+#ifdef CONFIG_X86_PAE
+	pmd_t *spmd;
+	pmd_t gpmd;
+#endif
+
 	/* First step: get the top-level Guest page table entry. */
 	gpgd = lgread(cpu, gpgd_addr(cpu, vaddr), pgd_t);
 	/* Toplevel not present?  We can't map it in. */
@@ -228,12 +308,45 @@
 		check_gpgd(cpu, gpgd);
 		/* And we copy the flags to the shadow PGD entry.  The page
 		 * number in the shadow PGD is the page we just allocated. */
-		*spgd = __pgd(__pa(ptepage) | pgd_flags(gpgd));
+		set_pgd(spgd, __pgd(__pa(ptepage) | pgd_flags(gpgd)));
+	}
+
+#ifdef CONFIG_X86_PAE
+	gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t);
+	/* middle level not present?  We can't map it in. */
+	if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
+		return false;
+
+	/* Now look at the matching shadow entry. */
+	spmd = spmd_addr(cpu, *spgd, vaddr);
+
+	if (!(pmd_flags(*spmd) & _PAGE_PRESENT)) {
+		/* No shadow entry: allocate a new shadow PTE page. */
+		unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
+
+		/* This is not really the Guest's fault, but killing it is
+		* simple for this corner case. */
+		if (!ptepage) {
+			kill_guest(cpu, "out of memory allocating pte page");
+			return false;
+		}
+
+		/* We check that the Guest pmd is OK. */
+		check_gpmd(cpu, gpmd);
+
+		/* And we copy the flags to the shadow PMD entry.  The page
+		 * number in the shadow PMD is the page we just allocated. */
+		native_set_pmd(spmd, __pmd(__pa(ptepage) | pmd_flags(gpmd)));
 	}
 
 	/* OK, now we look at the lower level in the Guest page table: keep its
 	 * address, because we might update it later. */
-	gpte_ptr = gpte_addr(gpgd, vaddr);
+	gpte_ptr = gpte_addr(cpu, gpmd, vaddr);
+#else
+	/* OK, now we look at the lower level in the Guest page table: keep its
+	 * address, because we might update it later. */
+	gpte_ptr = gpte_addr(cpu, gpgd, vaddr);
+#endif
 	gpte = lgread(cpu, gpte_ptr, pte_t);
 
 	/* If this page isn't in the Guest page tables, we can't page it in. */
@@ -259,7 +372,7 @@
 		gpte = pte_mkdirty(gpte);
 
 	/* Get the pointer to the shadow PTE entry we're going to set. */
-	spte = spte_addr(*spgd, vaddr);
+	spte = spte_addr(cpu, *spgd, vaddr);
 	/* If there was a valid shadow PTE entry here before, we release it.
 	 * This can happen with a write to a previously read-only entry. */
 	release_pte(*spte);
@@ -273,7 +386,7 @@
 		 * table entry, even if the Guest says it's writable.  That way
 		 * we will come back here when a write does actually occur, so
 		 * we can update the Guest's _PAGE_DIRTY flag. */
-		*spte = gpte_to_spte(cpu, pte_wrprotect(gpte), 0);
+		native_set_pte(spte, gpte_to_spte(cpu, pte_wrprotect(gpte), 0));
 
 	/* Finally, we write the Guest PTE entry back: we've set the
 	 * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
@@ -301,14 +414,23 @@
 	pgd_t *spgd;
 	unsigned long flags;
 
+#ifdef CONFIG_X86_PAE
+	pmd_t *spmd;
+#endif
 	/* Look at the current top level entry: is it present? */
 	spgd = spgd_addr(cpu, cpu->cpu_pgd, vaddr);
 	if (!(pgd_flags(*spgd) & _PAGE_PRESENT))
 		return false;
 
+#ifdef CONFIG_X86_PAE
+	spmd = spmd_addr(cpu, *spgd, vaddr);
+	if (!(pmd_flags(*spmd) & _PAGE_PRESENT))
+		return false;
+#endif
+
 	/* Check the flags on the pte entry itself: it must be present and
 	 * writable. */
-	flags = pte_flags(*(spte_addr(*spgd, vaddr)));
+	flags = pte_flags(*(spte_addr(cpu, *spgd, vaddr)));
 
 	return (flags & (_PAGE_PRESENT|_PAGE_RW)) == (_PAGE_PRESENT|_PAGE_RW);
 }
@@ -322,8 +444,43 @@
 		kill_guest(cpu, "bad stack page %#lx", vaddr);
 }
 
+#ifdef CONFIG_X86_PAE
+static void release_pmd(pmd_t *spmd)
+{
+	/* If the entry's not present, there's nothing to release. */
+	if (pmd_flags(*spmd) & _PAGE_PRESENT) {
+		unsigned int i;
+		pte_t *ptepage = __va(pmd_pfn(*spmd) << PAGE_SHIFT);
+		/* For each entry in the page, we might need to release it. */
+		for (i = 0; i < PTRS_PER_PTE; i++)
+			release_pte(ptepage[i]);
+		/* Now we can free the page of PTEs */
+		free_page((long)ptepage);
+		/* And zero out the PMD entry so we never release it twice. */
+		native_set_pmd(spmd, __pmd(0));
+	}
+}
+
+static void release_pgd(pgd_t *spgd)
+{
+	/* If the entry's not present, there's nothing to release. */
+	if (pgd_flags(*spgd) & _PAGE_PRESENT) {
+		unsigned int i;
+		pmd_t *pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
+
+		for (i = 0; i < PTRS_PER_PMD; i++)
+			release_pmd(&pmdpage[i]);
+
+		/* Now we can free the page of PMDs */
+		free_page((long)pmdpage);
+		/* And zero out the PGD entry so we never release it twice. */
+		set_pgd(spgd, __pgd(0));
+	}
+}
+
+#else /* !CONFIG_X86_PAE */
 /*H:450 If we chase down the release_pgd() code, it looks like this: */
-static void release_pgd(struct lguest *lg, pgd_t *spgd)
+static void release_pgd(pgd_t *spgd)
 {
 	/* If the entry's not present, there's nothing to release. */
 	if (pgd_flags(*spgd) & _PAGE_PRESENT) {
@@ -341,7 +498,7 @@
 		*spgd = __pgd(0);
 	}
 }
-
+#endif
 /*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
  * hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
  * It simply releases every PTE page from 0 up to the Guest's kernel address. */
@@ -350,7 +507,7 @@
 	unsigned int i;
 	/* Release every pgd entry up to the kernel's address. */
 	for (i = 0; i < pgd_index(lg->kernel_address); i++)
-		release_pgd(lg, lg->pgdirs[idx].pgdir + i);
+		release_pgd(lg->pgdirs[idx].pgdir + i);
 }
 
 /*H:440 (v) Flushing (throwing away) page tables,
@@ -369,7 +526,9 @@
 {
 	pgd_t gpgd;
 	pte_t gpte;
-
+#ifdef CONFIG_X86_PAE
+	pmd_t gpmd;
+#endif
 	/* First step: get the top-level Guest page table entry. */
 	gpgd = lgread(cpu, gpgd_addr(cpu, vaddr), pgd_t);
 	/* Toplevel not present?  We can't map it in. */
@@ -378,7 +537,14 @@
 		return -1UL;
 	}
 
-	gpte = lgread(cpu, gpte_addr(gpgd, vaddr), pte_t);
+#ifdef CONFIG_X86_PAE
+	gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t);
+	if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
+		kill_guest(cpu, "Bad address %#lx", vaddr);
+	gpte = lgread(cpu, gpte_addr(cpu, gpmd, vaddr), pte_t);
+#else
+	gpte = lgread(cpu, gpte_addr(cpu, gpgd, vaddr), pte_t);
+#endif
 	if (!(pte_flags(gpte) & _PAGE_PRESENT))
 		kill_guest(cpu, "Bad address %#lx", vaddr);
 
@@ -405,6 +571,9 @@
 			      int *blank_pgdir)
 {
 	unsigned int next;
+#ifdef CONFIG_X86_PAE
+	pmd_t *pmd_table;
+#endif
 
 	/* We pick one entry at random to throw out.  Choosing the Least
 	 * Recently Used might be better, but this is easy. */
@@ -416,10 +585,27 @@
 		/* If the allocation fails, just keep using the one we have */
 		if (!cpu->lg->pgdirs[next].pgdir)
 			next = cpu->cpu_pgd;
-		else
-			/* This is a blank page, so there are no kernel
-			 * mappings: caller must map the stack! */
+		else {
+#ifdef CONFIG_X86_PAE
+			/* In PAE mode, allocate a pmd page and populate the
+			 * last pgd entry. */
+			pmd_table = (pmd_t *)get_zeroed_page(GFP_KERNEL);
+			if (!pmd_table) {
+				free_page((long)cpu->lg->pgdirs[next].pgdir);
+				set_pgd(cpu->lg->pgdirs[next].pgdir, __pgd(0));
+				next = cpu->cpu_pgd;
+			} else {
+				set_pgd(cpu->lg->pgdirs[next].pgdir +
+					SWITCHER_PGD_INDEX,
+					__pgd(__pa(pmd_table) | _PAGE_PRESENT));
+				/* This is a blank page, so there are no kernel
+				 * mappings: caller must map the stack! */
+				*blank_pgdir = 1;
+			}
+#else
 			*blank_pgdir = 1;
+#endif
+		}
 	}
 	/* Record which Guest toplevel this shadows. */
 	cpu->lg->pgdirs[next].gpgdir = gpgdir;
@@ -431,7 +617,7 @@
 
 /*H:430 (iv) Switching page tables
  *
- * Now we've seen all the page table setting and manipulation, let's see what
+ * Now we've seen all the page table setting and manipulation, let's see
  * what happens when the Guest changes page tables (ie. changes the top-level
  * pgdir).  This occurs on almost every context switch. */
 void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
@@ -460,10 +646,25 @@
 
 	/* Every shadow pagetable this Guest has */
 	for (i = 0; i < ARRAY_SIZE(lg->pgdirs); i++)
-		if (lg->pgdirs[i].pgdir)
+		if (lg->pgdirs[i].pgdir) {
+#ifdef CONFIG_X86_PAE
+			pgd_t *spgd;
+			pmd_t *pmdpage;
+			unsigned int k;
+
+			/* Get the last pmd page. */
+			spgd = lg->pgdirs[i].pgdir + SWITCHER_PGD_INDEX;
+			pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
+
+			/* And release the pmd entries of that pmd page,
+			 * except for the switcher pmd. */
+			for (k = 0; k < SWITCHER_PMD_INDEX; k++)
+				release_pmd(&pmdpage[k]);
+#endif
 			/* Every PGD entry except the Switcher at the top */
 			for (j = 0; j < SWITCHER_PGD_INDEX; j++)
-				release_pgd(lg, lg->pgdirs[i].pgdir + j);
+				release_pgd(lg->pgdirs[i].pgdir + j);
+		}
 }
 
 /* We also throw away everything when a Guest tells us it's changed a kernel
@@ -504,24 +705,37 @@
 {
 	/* Look up the matching shadow page directory entry. */
 	pgd_t *spgd = spgd_addr(cpu, idx, vaddr);
+#ifdef CONFIG_X86_PAE
+	pmd_t *spmd;
+#endif
 
 	/* If the top level isn't present, there's no entry to update. */
 	if (pgd_flags(*spgd) & _PAGE_PRESENT) {
-		/* Otherwise, we start by releasing the existing entry. */
-		pte_t *spte = spte_addr(*spgd, vaddr);
-		release_pte(*spte);
+#ifdef CONFIG_X86_PAE
+		spmd = spmd_addr(cpu, *spgd, vaddr);
+		if (pmd_flags(*spmd) & _PAGE_PRESENT) {
+#endif
+			/* Otherwise, we start by releasing
+			 * the existing entry. */
+			pte_t *spte = spte_addr(cpu, *spgd, vaddr);
+			release_pte(*spte);
 
-		/* If they're setting this entry as dirty or accessed, we might
-		 * as well put that entry they've given us in now.  This shaves
-		 * 10% off a copy-on-write micro-benchmark. */
-		if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
-			check_gpte(cpu, gpte);
-			*spte = gpte_to_spte(cpu, gpte,
-					     pte_flags(gpte) & _PAGE_DIRTY);
-		} else
-			/* Otherwise kill it and we can demand_page() it in
-			 * later. */
-			*spte = __pte(0);
+			/* If they're setting this entry as dirty or accessed,
+			 * we might as well put that entry they've given us
+			 * in now.  This shaves 10% off a
+			 * copy-on-write micro-benchmark. */
+			if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
+				check_gpte(cpu, gpte);
+				native_set_pte(spte,
+						gpte_to_spte(cpu, gpte,
+						pte_flags(gpte) & _PAGE_DIRTY));
+			} else
+				/* Otherwise kill it and we can demand_page()
+				 * it in later. */
+				native_set_pte(spte, __pte(0));
+#ifdef CONFIG_X86_PAE
+		}
+#endif
 	}
 }
 
@@ -568,12 +782,10 @@
  *
  * So with that in mind here's our code to to update a (top-level) PGD entry:
  */
-void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 idx)
+void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx)
 {
 	int pgdir;
 
-	/* The kernel seems to try to initialize this early on: we ignore its
-	 * attempts to map over the Switcher. */
 	if (idx >= SWITCHER_PGD_INDEX)
 		return;
 
@@ -581,8 +793,14 @@
 	pgdir = find_pgdir(lg, gpgdir);
 	if (pgdir < ARRAY_SIZE(lg->pgdirs))
 		/* ... throw it away. */
-		release_pgd(lg, lg->pgdirs[pgdir].pgdir + idx);
+		release_pgd(lg->pgdirs[pgdir].pgdir + idx);
 }
+#ifdef CONFIG_X86_PAE
+void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
+{
+	guest_pagetable_clear_all(&lg->cpus[0]);
+}
+#endif
 
 /* Once we know how much memory we have we can construct simple identity
  * (which set virtual == physical) and linear mappings
@@ -596,8 +814,16 @@
 {
 	pgd_t __user *pgdir;
 	pte_t __user *linear;
-	unsigned int mapped_pages, i, linear_pages, phys_linear;
 	unsigned long mem_base = (unsigned long)lg->mem_base;
+	unsigned int mapped_pages, i, linear_pages;
+#ifdef CONFIG_X86_PAE
+	pmd_t __user *pmds;
+	unsigned int j;
+	pgd_t pgd;
+	pmd_t pmd;
+#else
+	unsigned int phys_linear;
+#endif
 
 	/* We have mapped_pages frames to map, so we need
 	 * linear_pages page tables to map them. */
@@ -610,6 +836,9 @@
 	/* Now we use the next linear_pages pages as pte pages */
 	linear = (void *)pgdir - linear_pages * PAGE_SIZE;
 
+#ifdef CONFIG_X86_PAE
+	pmds = (void *)linear - PAGE_SIZE;
+#endif
 	/* Linear mapping is easy: put every page's address into the
 	 * mapping in order. */
 	for (i = 0; i < mapped_pages; i++) {
@@ -621,6 +850,22 @@
 
 	/* The top level points to the linear page table pages above.
 	 * We setup the identity and linear mappings here. */
+#ifdef CONFIG_X86_PAE
+	for (i = j = 0; i < mapped_pages && j < PTRS_PER_PMD;
+	     i += PTRS_PER_PTE, j++) {
+		native_set_pmd(&pmd, __pmd(((unsigned long)(linear + i)
+		- mem_base) | _PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
+
+		if (copy_to_user(&pmds[j], &pmd, sizeof(pmd)) != 0)
+			return -EFAULT;
+	}
+
+	set_pgd(&pgd, __pgd(((u32)pmds - mem_base) | _PAGE_PRESENT));
+	if (copy_to_user(&pgdir[0], &pgd, sizeof(pgd)) != 0)
+		return -EFAULT;
+	if (copy_to_user(&pgdir[3], &pgd, sizeof(pgd)) != 0)
+		return -EFAULT;
+#else
 	phys_linear = (unsigned long)linear - mem_base;
 	for (i = 0; i < mapped_pages; i += PTRS_PER_PTE) {
 		pgd_t pgd;
@@ -633,6 +878,7 @@
 				    &pgd, sizeof(pgd)))
 			return -EFAULT;
 	}
+#endif
 
 	/* We return the top level (guest-physical) address: remember where
 	 * this is. */
@@ -648,7 +894,10 @@
 	u64 mem;
 	u32 initrd_size;
 	struct boot_params __user *boot = (struct boot_params *)lg->mem_base;
-
+#ifdef CONFIG_X86_PAE
+	pgd_t *pgd;
+	pmd_t *pmd_table;
+#endif
 	/* Get the Guest memory size and the ramdisk size from the boot header
 	 * located at lg->mem_base (Guest address 0). */
 	if (copy_from_user(&mem, &boot->e820_map[0].size, sizeof(mem))
@@ -663,6 +912,15 @@
 	lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL);
 	if (!lg->pgdirs[0].pgdir)
 		return -ENOMEM;
+#ifdef CONFIG_X86_PAE
+	pgd = lg->pgdirs[0].pgdir;
+	pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
+	if (!pmd_table)
+		return -ENOMEM;
+
+	set_pgd(pgd + SWITCHER_PGD_INDEX,
+		__pgd(__pa(pmd_table) | _PAGE_PRESENT));
+#endif
 	lg->cpus[0].cpu_pgd = 0;
 	return 0;
 }
@@ -672,17 +930,24 @@
 {
 	/* We get the kernel address: above this is all kernel memory. */
 	if (get_user(cpu->lg->kernel_address,
-		     &cpu->lg->lguest_data->kernel_address)
-	    /* We tell the Guest that it can't use the top 4MB of virtual
-	     * addresses used by the Switcher. */
-	    || put_user(4U*1024*1024, &cpu->lg->lguest_data->reserve_mem)
-	    || put_user(cpu->lg->pgdirs[0].gpgdir, &cpu->lg->lguest_data->pgdir))
+		&cpu->lg->lguest_data->kernel_address)
+		/* We tell the Guest that it can't use the top 2 or 4 MB
+		 * of virtual addresses used by the Switcher. */
+		|| put_user(RESERVE_MEM * 1024 * 1024,
+			&cpu->lg->lguest_data->reserve_mem)
+		|| put_user(cpu->lg->pgdirs[0].gpgdir,
+			&cpu->lg->lguest_data->pgdir))
 		kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
 
 	/* In flush_user_mappings() we loop from 0 to
 	 * "pgd_index(lg->kernel_address)".  This assumes it won't hit the
 	 * Switcher mappings, so check that now. */
+#ifdef CONFIG_X86_PAE
+	if (pgd_index(cpu->lg->kernel_address) == SWITCHER_PGD_INDEX &&
+		pmd_index(cpu->lg->kernel_address) == SWITCHER_PMD_INDEX)
+#else
 	if (pgd_index(cpu->lg->kernel_address) >= SWITCHER_PGD_INDEX)
+#endif
 		kill_guest(cpu, "bad kernel address %#lx",
 				 cpu->lg->kernel_address);
 }
@@ -708,16 +973,30 @@
 void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
 {
 	pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
-	pgd_t switcher_pgd;
 	pte_t regs_pte;
 	unsigned long pfn;
 
+#ifdef CONFIG_X86_PAE
+	pmd_t switcher_pmd;
+	pmd_t *pmd_table;
+
+	native_set_pmd(&switcher_pmd, pfn_pmd(__pa(switcher_pte_page) >>
+		       PAGE_SHIFT, PAGE_KERNEL_EXEC));
+
+	pmd_table = __va(pgd_pfn(cpu->lg->
+			pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX])
+								<< PAGE_SHIFT);
+	native_set_pmd(&pmd_table[SWITCHER_PMD_INDEX], switcher_pmd);
+#else
+	pgd_t switcher_pgd;
+
 	/* Make the last PGD entry for this Guest point to the Switcher's PTE
 	 * page for this CPU (with appropriate flags). */
-	switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL);
+	switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL_EXEC);
 
 	cpu->lg->pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX] = switcher_pgd;
 
+#endif
 	/* We also change the Switcher PTE page.  When we're running the Guest,
 	 * we want the Guest's "regs" page to appear where the first Switcher
 	 * page for this CPU is.  This is an optimization: when the Switcher
@@ -726,8 +1005,9 @@
 	 * page is already mapped there, we don't have to copy them out
 	 * again. */
 	pfn = __pa(cpu->regs_page) >> PAGE_SHIFT;
-	regs_pte = pfn_pte(pfn, __pgprot(__PAGE_KERNEL));
-	switcher_pte_page[(unsigned long)pages/PAGE_SIZE%PTRS_PER_PTE] = regs_pte;
+	native_set_pte(&regs_pte, pfn_pte(pfn, PAGE_KERNEL));
+	native_set_pte(&switcher_pte_page[pte_index((unsigned long)pages)],
+			regs_pte);
 }
 /*:*/
 
@@ -752,21 +1032,21 @@
 
 	/* The first entries are easy: they map the Switcher code. */
 	for (i = 0; i < pages; i++) {
-		pte[i] = mk_pte(switcher_page[i],
-				__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED));
+		native_set_pte(&pte[i], mk_pte(switcher_page[i],
+				__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
 	}
 
 	/* The only other thing we map is this CPU's pair of pages. */
 	i = pages + cpu*2;
 
 	/* First page (Guest registers) is writable from the Guest */
-	pte[i] = pfn_pte(page_to_pfn(switcher_page[i]),
-			 __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW));
+	native_set_pte(&pte[i], pfn_pte(page_to_pfn(switcher_page[i]),
+			 __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW)));
 
 	/* The second page contains the "struct lguest_ro_state", and is
 	 * read-only. */
-	pte[i+1] = pfn_pte(page_to_pfn(switcher_page[i+1]),
-			   __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED));
+	native_set_pte(&pte[i+1], pfn_pte(page_to_pfn(switcher_page[i+1]),
+			   __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
 }
 
 /* We've made it through the page table code.  Perhaps our tired brains are
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index 7ede64f..482ed5a 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -150,7 +150,7 @@
 {
 	/* We assume the Guest has the same number of GDT entries as the
 	 * Host, otherwise we'd have to dynamically allocate the Guest GDT. */
-	if (num > ARRAY_SIZE(cpu->arch.gdt))
+	if (num >= ARRAY_SIZE(cpu->arch.gdt))
 		kill_guest(cpu, "too many gdt entries %i", num);
 
 	/* Set it up, then fix it. */
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 5d496a9..44b9315 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -146,7 +146,6 @@
 static MPT_RESETHANDLER		 MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 static struct mpt_pci_driver 	*MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 
-static DECLARE_WAIT_QUEUE_HEAD(mpt_waitq);
 
 /*
  *  Driver Callback Index's
@@ -159,7 +158,8 @@
  *  Forward protos...
  */
 static irqreturn_t mpt_interrupt(int irq, void *bus_id);
-static int	mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
+static int	mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+		MPT_FRAME_HDR *reply);
 static int	mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
 			u32 *req, int replyBytes, u16 *u16reply, int maxwait,
 			int sleepFlag);
@@ -190,9 +190,9 @@
 static int	mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
 static void 	mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
 static void 	mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
-static void	mpt_timer_expired(unsigned long data);
 static void	mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
-static int	SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch);
+static int	SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
+	int sleepFlag);
 static int	SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
 static int	mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
 static int	mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
@@ -207,8 +207,8 @@
 #endif
 static void	mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
 
-//int		mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
-static int	ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers);
+static int	ProcessEventNotification(MPT_ADAPTER *ioc,
+		EventNotificationReply_t *evReply, int *evHandlers);
 static void	mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
 static void	mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
 static void	mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
@@ -277,6 +277,56 @@
 }
 
 /**
+ * mpt_is_discovery_complete - determine if discovery has completed
+ * @ioc: per adatper instance
+ *
+ * Returns 1 when discovery completed, else zero.
+ */
+static int
+mpt_is_discovery_complete(MPT_ADAPTER *ioc)
+{
+	ConfigExtendedPageHeader_t hdr;
+	CONFIGPARMS cfg;
+	SasIOUnitPage0_t *buffer;
+	dma_addr_t dma_handle;
+	int rc = 0;
+
+	memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
+	memset(&cfg, 0, sizeof(CONFIGPARMS));
+	hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
+	hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+	hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+	cfg.cfghdr.ehdr = &hdr;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+	if ((mpt_config(ioc, &cfg)))
+		goto out;
+	if (!hdr.ExtPageLength)
+		goto out;
+
+	buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+	    &dma_handle);
+	if (!buffer)
+		goto out;
+
+	cfg.physAddr = dma_handle;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+	if ((mpt_config(ioc, &cfg)))
+		goto out_free_consistent;
+
+	if (!(buffer->PhyData[0].PortFlags &
+	    MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
+		rc = 1;
+
+ out_free_consistent:
+	pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+	    buffer, dma_handle);
+ out:
+	return rc;
+}
+
+/**
  *	mpt_fault_reset_work - work performed on workq after ioc fault
  *	@work: input argument, used to derive ioc
  *
@@ -290,7 +340,7 @@
 	int		 rc;
 	unsigned long	 flags;
 
-	if (ioc->diagPending || !ioc->active)
+	if (ioc->ioc_reset_in_progress || !ioc->active)
 		goto out;
 
 	ioc_raw_state = mpt_GetIocState(ioc, 0);
@@ -307,6 +357,12 @@
 			printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
 			    "reset (%04xh)\n", ioc->name, ioc_raw_state &
 			    MPI_DOORBELL_DATA_MASK);
+	} else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
+		if ((mpt_is_discovery_complete(ioc))) {
+			devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
+			    "discovery_quiesce_io flag\n", ioc->name));
+			ioc->sas_discovery_quiesce_io = 0;
+		}
 	}
 
  out:
@@ -317,11 +373,11 @@
 		ioc = ioc->alt_ioc;
 
 	/* rearm the timer */
-	spin_lock_irqsave(&ioc->fault_reset_work_lock, flags);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
 	if (ioc->reset_work_q)
 		queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
 			msecs_to_jiffies(MPT_POLLING_INTERVAL));
-	spin_unlock_irqrestore(&ioc->fault_reset_work_lock, flags);
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 }
 
 
@@ -501,9 +557,9 @@
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mpt_base_reply - MPT base driver's callback routine
+ *	mptbase_reply - MPT base driver's callback routine
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	@mf: Pointer to original MPT request frame
+ *	@req: Pointer to original MPT request frame
  *	@reply: Pointer to MPT reply frame (NULL if TurboReply)
  *
  *	MPT base driver's callback routine; all base driver
@@ -514,122 +570,49 @@
  *	should be freed, or 0 if it shouldn't.
  */
 static int
-mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
+mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
 {
+	EventNotificationReply_t *pEventReply;
+	u8 event;
+	int evHandlers;
 	int freereq = 1;
-	u8 func;
 
-	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_base_reply() called\n", ioc->name));
-#ifdef CONFIG_FUSION_LOGGING
-	if ((ioc->debug_level & MPT_DEBUG_MSG_FRAME) &&
-			!(reply->u.hdr.MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) {
-		dmfprintk(ioc, printk(MYIOC_s_INFO_FMT ": Original request frame (@%p) header\n",
-		    ioc->name, mf));
-		DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)mf);
-	}
-#endif
-
-	func = reply->u.hdr.Function;
-	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_base_reply, Function=%02Xh\n",
-			ioc->name, func));
-
-	if (func == MPI_FUNCTION_EVENT_NOTIFICATION) {
-		EventNotificationReply_t *pEvReply = (EventNotificationReply_t *) reply;
-		int evHandlers = 0;
-		int results;
-
-		results = ProcessEventNotification(ioc, pEvReply, &evHandlers);
-		if (results != evHandlers) {
-			/* CHECKME! Any special handling needed here? */
-			devtverboseprintk(ioc, printk(MYIOC_s_WARN_FMT "Called %d event handlers, sum results = %d\n",
-					ioc->name, evHandlers, results));
-		}
-
-		/*
-		 *	Hmmm...  It seems that EventNotificationReply is an exception
-		 *	to the rule of one reply per request.
-		 */
-		if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) {
+	switch (reply->u.hdr.Function) {
+	case MPI_FUNCTION_EVENT_NOTIFICATION:
+		pEventReply = (EventNotificationReply_t *)reply;
+		evHandlers = 0;
+		ProcessEventNotification(ioc, pEventReply, &evHandlers);
+		event = le32_to_cpu(pEventReply->Event) & 0xFF;
+		if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
 			freereq = 0;
-		} else {
-			devtverboseprintk(ioc, printk(MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
-				ioc->name, pEvReply));
+		if (event != MPI_EVENT_EVENT_CHANGE)
+			break;
+	case MPI_FUNCTION_CONFIG:
+	case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
+		ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+		if (reply) {
+			ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+			memcpy(ioc->mptbase_cmds.reply, reply,
+			    min(MPT_DEFAULT_FRAME_SIZE,
+				4 * reply->u.reply.MsgLength));
 		}
-
-#ifdef CONFIG_PROC_FS
-//		LogEvent(ioc, pEvReply);
-#endif
-
-	} else if (func == MPI_FUNCTION_EVENT_ACK) {
-		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_base_reply, EventAck reply received\n",
-				ioc->name));
-	} else if (func == MPI_FUNCTION_CONFIG) {
-		CONFIGPARMS *pCfg;
-		unsigned long flags;
-
-		dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "config_complete (mf=%p,mr=%p)\n",
-				ioc->name, mf, reply));
-
-		pCfg = * ((CONFIGPARMS **)((u8 *) mf + ioc->req_sz - sizeof(void *)));
-
-		if (pCfg) {
-			/* disable timer and remove from linked list */
-			del_timer(&pCfg->timer);
-
-			spin_lock_irqsave(&ioc->FreeQlock, flags);
-			list_del(&pCfg->linkage);
-			spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-			/*
-			 *	If IOC Status is SUCCESS, save the header
-			 *	and set the status code to GOOD.
-			 */
-			pCfg->status = MPT_CONFIG_ERROR;
-			if (reply) {
-				ConfigReply_t	*pReply = (ConfigReply_t *)reply;
-				u16		 status;
-
-				status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
-				dcprintk(ioc, printk(MYIOC_s_NOTE_FMT "  IOCStatus=%04xh, IOCLogInfo=%08xh\n",
-				     ioc->name, status, le32_to_cpu(pReply->IOCLogInfo)));
-
-				pCfg->status = status;
-				if (status == MPI_IOCSTATUS_SUCCESS) {
-					if ((pReply->Header.PageType &
-					    MPI_CONFIG_PAGETYPE_MASK) ==
-					    MPI_CONFIG_PAGETYPE_EXTENDED) {
-						pCfg->cfghdr.ehdr->ExtPageLength =
-						    le16_to_cpu(pReply->ExtPageLength);
-						pCfg->cfghdr.ehdr->ExtPageType =
-						    pReply->ExtPageType;
-					}
-					pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
-
-					/* If this is a regular header, save PageLength. */
-					/* LMP Do this better so not using a reserved field! */
-					pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
-					pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
-					pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
-				}
-			}
-
-			/*
-			 *	Wake up the original calling thread
-			 */
-			pCfg->wait_done = 1;
-			wake_up(&mpt_waitq);
-		}
-	} else if (func == MPI_FUNCTION_SAS_IO_UNIT_CONTROL) {
-		/* we should be always getting a reply frame */
-		memcpy(ioc->persist_reply_frame, reply,
-		    min(MPT_DEFAULT_FRAME_SIZE,
-		    4*reply->u.reply.MsgLength));
-		del_timer(&ioc->persist_timer);
-		ioc->persist_wait_done = 1;
-		wake_up(&mpt_waitq);
-	} else {
-		printk(MYIOC_s_ERR_FMT "Unexpected msg function (=%02Xh) reply received!\n",
-				ioc->name, func);
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+			complete(&ioc->mptbase_cmds.done);
+		} else
+			freereq = 0;
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
+			freereq = 1;
+		break;
+	case MPI_FUNCTION_EVENT_ACK:
+		devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "EventAck reply received\n", ioc->name));
+		break;
+	default:
+		printk(MYIOC_s_ERR_FMT
+		    "Unexpected msg function (=%02Xh) reply received!\n",
+		    ioc->name, reply->u.hdr.Function);
+		break;
 	}
 
 	/*
@@ -988,17 +971,21 @@
 
 	/*  Put Request back on FreeQ!  */
 	spin_lock_irqsave(&ioc->FreeQlock, flags);
-	mf->u.frame.linkage.arg1 = 0xdeadbeaf; /* signature to know if this mf is freed */
+	if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
+		goto out;
+	/* signature to know if this mf is freed */
+	mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
 	list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
 #ifdef MFCNT
 	ioc->mfcnt--;
 #endif
+ out:
 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mpt_add_sge - Place a simple SGE at address pAddr.
+ *	mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
  *	@pAddr: virtual address for SGE
  *	@flagslength: SGE flags and data transfer length
  *	@dma_addr: Physical address
@@ -1006,23 +993,117 @@
  *	This routine places a MPT request frame back on the MPT adapter's
  *	FreeQ.
  */
-void
-mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
+static void
+mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
 {
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+	SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
+	pSge->FlagsLength = cpu_to_le32(flagslength);
+	pSge->Address = cpu_to_le32(dma_addr);
+}
+
+/**
+ *	mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
+ *	@pAddr: virtual address for SGE
+ *	@flagslength: SGE flags and data transfer length
+ *	@dma_addr: Physical address
+ *
+ *	This routine places a MPT request frame back on the MPT adapter's
+ *	FreeQ.
+ **/
+static void
+mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
+{
+	SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+	pSge->Address.Low = cpu_to_le32
+			(lower_32_bits((unsigned long)(dma_addr)));
+	pSge->Address.High = cpu_to_le32
+			(upper_32_bits((unsigned long)dma_addr));
+	pSge->FlagsLength = cpu_to_le32
+			((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
+}
+
+/**
+ *	mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr
+ *	(1078 workaround).
+ *	@pAddr: virtual address for SGE
+ *	@flagslength: SGE flags and data transfer length
+ *	@dma_addr: Physical address
+ *
+ *	This routine places a MPT request frame back on the MPT adapter's
+ *	FreeQ.
+ **/
+static void
+mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
+{
+	SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+	u32 tmp;
+
+	pSge->Address.Low = cpu_to_le32
+			(lower_32_bits((unsigned long)(dma_addr)));
+	tmp = (u32)(upper_32_bits((unsigned long)dma_addr));
+
+	/*
+	 * 1078 errata workaround for the 36GB limitation
+	 */
+	if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32)  == 9) {
+		flagslength |=
+		    MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
+		tmp |= (1<<31);
+		if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
+			printk(KERN_DEBUG "1078 P0M2 addressing for "
+			    "addr = 0x%llx len = %d\n",
+			    (unsigned long long)dma_addr,
+			    MPI_SGE_LENGTH(flagslength));
+	}
+
+	pSge->Address.High = cpu_to_le32(tmp);
+	pSge->FlagsLength = cpu_to_le32(
+		(flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ *	mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
+ *	@pAddr: virtual address for SGE
+ *	@next: nextChainOffset value (u32's)
+ *	@length: length of next SGL segment
+ *	@dma_addr: Physical address
+ *
+ */
+static void
+mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
+{
+		SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
+		pChain->Length = cpu_to_le16(length);
+		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
+		pChain->NextChainOffset = next;
+		pChain->Address = cpu_to_le32(dma_addr);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ *	mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
+ *	@pAddr: virtual address for SGE
+ *	@next: nextChainOffset value (u32's)
+ *	@length: length of next SGL segment
+ *	@dma_addr: Physical address
+ *
+ */
+static void
+mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
+{
+		SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
 		u32 tmp = dma_addr & 0xFFFFFFFF;
 
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address.Low = cpu_to_le32(tmp);
-		tmp = (u32) ((u64)dma_addr >> 32);
-		pSge->Address.High = cpu_to_le32(tmp);
+		pChain->Length = cpu_to_le16(length);
+		pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
+				 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
 
-	} else {
-		SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address = cpu_to_le32(dma_addr);
-	}
+		pChain->NextChainOffset = next;
+
+		pChain->Address.Low = cpu_to_le32(tmp);
+		tmp = (u32)(upper_32_bits((unsigned long)dma_addr));
+		pChain->Address.High = cpu_to_le32(tmp);
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1225,7 +1306,7 @@
 	}
 	flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
 	flags_length |= ioc->HostPageBuffer_sz;
-	mpt_add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
+	ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
 	ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
 
 return 0;
@@ -1534,21 +1615,42 @@
 
 	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
-	    && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
-		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
-		    ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
-		    ioc->name));
-	} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
-	    && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
-		    ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
-		    ioc->name));
+	if (sizeof(dma_addr_t) > 4) {
+		const uint64_t required_mask = dma_get_required_mask
+		    (&pdev->dev);
+		if (required_mask > DMA_BIT_MASK(32)
+			&& !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+			&& !pci_set_consistent_dma_mask(pdev,
+						 DMA_BIT_MASK(64))) {
+			ioc->dma_mask = DMA_BIT_MASK(64);
+			dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+				": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+				ioc->name));
+		} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+			&& !pci_set_consistent_dma_mask(pdev,
+						DMA_BIT_MASK(32))) {
+			ioc->dma_mask = DMA_BIT_MASK(32);
+			dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+				": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+				ioc->name));
+		} else {
+			printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
+			    ioc->name, pci_name(pdev));
+			return r;
+		}
 	} else {
-		printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
-		    ioc->name, pci_name(pdev));
-		pci_release_selected_regions(pdev, ioc->bars);
-		return r;
+		if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+			&& !pci_set_consistent_dma_mask(pdev,
+						DMA_BIT_MASK(32))) {
+			ioc->dma_mask = DMA_BIT_MASK(32);
+			dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+				": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+				ioc->name));
+		} else {
+			printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
+			    ioc->name, pci_name(pdev));
+			return r;
+		}
 	}
 
 	mem_phys = msize = 0;
@@ -1632,6 +1734,7 @@
 
 	ioc->id = mpt_ids++;
 	sprintf(ioc->name, "ioc%d", ioc->id);
+	dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
 
 	/*
 	 * set initial debug level
@@ -1650,14 +1753,36 @@
 		return r;
 	}
 
+	/*
+	 * Setting up proper handlers for scatter gather handling
+	 */
+	if (ioc->dma_mask == DMA_BIT_MASK(64)) {
+		if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
+			ioc->add_sge = &mpt_add_sge_64bit_1078;
+		else
+			ioc->add_sge = &mpt_add_sge_64bit;
+		ioc->add_chain = &mpt_add_chain_64bit;
+		ioc->sg_addr_size = 8;
+	} else {
+		ioc->add_sge = &mpt_add_sge;
+		ioc->add_chain = &mpt_add_chain;
+		ioc->sg_addr_size = 4;
+	}
+	ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
+
 	ioc->alloc_total = sizeof(MPT_ADAPTER);
 	ioc->req_sz = MPT_DEFAULT_FRAME_SIZE;		/* avoid div by zero! */
 	ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
 
 	ioc->pcidev = pdev;
-	ioc->diagPending = 0;
-	spin_lock_init(&ioc->diagLock);
-	spin_lock_init(&ioc->initializing_hba_lock);
+
+	spin_lock_init(&ioc->taskmgmt_lock);
+	mutex_init(&ioc->internal_cmds.mutex);
+	init_completion(&ioc->internal_cmds.done);
+	mutex_init(&ioc->mptbase_cmds.mutex);
+	init_completion(&ioc->mptbase_cmds.done);
+	mutex_init(&ioc->taskmgmt_cmds.mutex);
+	init_completion(&ioc->taskmgmt_cmds.done);
 
 	/* Initialize the event logging.
 	 */
@@ -1670,16 +1795,13 @@
 	ioc->mfcnt = 0;
 #endif
 
+	ioc->sh = NULL;
 	ioc->cached_fw = NULL;
 
 	/* Initilize SCSI Config Data structure
 	 */
 	memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
 
-	/* Initialize the running configQ head.
-	 */
-	INIT_LIST_HEAD(&ioc->configQ);
-
 	/* Initialize the fc rport list head.
 	 */
 	INIT_LIST_HEAD(&ioc->fc_rports);
@@ -1690,9 +1812,8 @@
 
 	/* Initialize workqueue */
 	INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
-	spin_lock_init(&ioc->fault_reset_work_lock);
 
-	snprintf(ioc->reset_work_q_name, sizeof(ioc->reset_work_q_name),
+	snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
 		 "mpt_poll_%d", ioc->id);
 	ioc->reset_work_q =
 		create_singlethread_workqueue(ioc->reset_work_q_name);
@@ -1767,11 +1888,14 @@
 	case MPI_MANUFACTPAGE_DEVID_SAS1064:
 	case MPI_MANUFACTPAGE_DEVID_SAS1068:
 		ioc->errata_flag_1064 = 1;
+		ioc->bus_type = SAS;
+		break;
 
 	case MPI_MANUFACTPAGE_DEVID_SAS1064E:
 	case MPI_MANUFACTPAGE_DEVID_SAS1068E:
 	case MPI_MANUFACTPAGE_DEVID_SAS1078:
 		ioc->bus_type = SAS;
+		break;
 	}
 
 
@@ -1813,6 +1937,11 @@
 	 */
 	mpt_detect_bound_ports(ioc, pdev);
 
+	INIT_LIST_HEAD(&ioc->fw_event_list);
+	spin_lock_init(&ioc->fw_event_lock);
+	snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
+	ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
+
 	if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
 	    CAN_SLEEP)) != 0){
 		printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
@@ -1885,13 +2014,18 @@
 	/*
 	 * Stop polling ioc for fault condition
 	 */
-	spin_lock_irqsave(&ioc->fault_reset_work_lock, flags);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
 	wq = ioc->reset_work_q;
 	ioc->reset_work_q = NULL;
-	spin_unlock_irqrestore(&ioc->fault_reset_work_lock, flags);
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 	cancel_delayed_work(&ioc->fault_reset_work);
 	destroy_workqueue(wq);
 
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	wq = ioc->fw_event_q;
+	ioc->fw_event_q = NULL;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+	destroy_workqueue(wq);
 
 	sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
 	remove_proc_entry(pname, NULL);
@@ -1994,6 +2128,21 @@
 	if (err)
 		return err;
 
+	if (ioc->dma_mask == DMA_BIT_MASK(64)) {
+		if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
+			ioc->add_sge = &mpt_add_sge_64bit_1078;
+		else
+			ioc->add_sge = &mpt_add_sge_64bit;
+		ioc->add_chain = &mpt_add_chain_64bit;
+		ioc->sg_addr_size = 8;
+	} else {
+
+		ioc->add_sge = &mpt_add_sge;
+		ioc->add_chain = &mpt_add_chain;
+		ioc->sg_addr_size = 4;
+	}
+	ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
+
 	printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
 	    ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
 	    CHIPREG_READ32(&ioc->chip->Doorbell));
@@ -2091,12 +2240,16 @@
 	ioc->active = 0;
 
 	if (ioc->alt_ioc) {
-		if (ioc->alt_ioc->active)
+		if (ioc->alt_ioc->active ||
+		    reason == MPT_HOSTEVENT_IOC_RECOVER) {
 			reset_alt_ioc_active = 1;
-
-		/* Disable alt-IOC's reply interrupts (and FreeQ) for a bit ... */
-		CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 0xFFFFFFFF);
-		ioc->alt_ioc->active = 0;
+			/* Disable alt-IOC's reply interrupts
+			 *  (and FreeQ) for a bit
+			 **/
+			CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
+				0xFFFFFFFF);
+			ioc->alt_ioc->active = 0;
+		}
 	}
 
 	hard = 1;
@@ -2117,9 +2270,11 @@
 			}
 
 		} else {
-			printk(MYIOC_s_WARN_FMT "NOT READY!\n", ioc->name);
+			printk(MYIOC_s_WARN_FMT
+			    "NOT READY WARNING!\n", ioc->name);
 		}
-		return -1;
+		ret = -1;
+		goto out;
 	}
 
 	/* hard_reset_done = 0 if a soft reset was performed
@@ -2129,7 +2284,9 @@
 		if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
 			alt_ioc_ready = 1;
 		else
-			printk(MYIOC_s_WARN_FMT "alt_ioc not ready!\n", ioc->alt_ioc->name);
+			printk(MYIOC_s_WARN_FMT
+			    ": alt-ioc Not ready WARNING!\n",
+			    ioc->alt_ioc->name);
 	}
 
 	for (ii=0; ii<5; ii++) {
@@ -2150,7 +2307,8 @@
 	if (alt_ioc_ready) {
 		if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
 			dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-			    "Initial Alt IocFacts failed rc=%x\n", ioc->name, rc));
+			    "Initial Alt IocFacts failed rc=%x\n",
+			    ioc->name, rc));
 			/* Retry - alt IOC was initialized once
 			 */
 			rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
@@ -2194,16 +2352,20 @@
 			    IRQF_SHARED, ioc->name, ioc);
 			if (rc < 0) {
 				printk(MYIOC_s_ERR_FMT "Unable to allocate "
-				    "interrupt %d!\n", ioc->name, ioc->pcidev->irq);
+				    "interrupt %d!\n",
+				    ioc->name, ioc->pcidev->irq);
 				if (ioc->msi_enable)
 					pci_disable_msi(ioc->pcidev);
-				return -EBUSY;
+				ret = -EBUSY;
+				goto out;
 			}
 			irq_allocated = 1;
 			ioc->pci_irq = ioc->pcidev->irq;
 			pci_set_master(ioc->pcidev);		/* ?? */
-			dprintk(ioc, printk(MYIOC_s_INFO_FMT "installed at interrupt "
-			    "%d\n", ioc->name, ioc->pcidev->irq));
+			pci_set_drvdata(ioc->pcidev, ioc);
+			dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+			    "installed at interrupt %d\n", ioc->name,
+			    ioc->pcidev->irq));
 		}
 	}
 
@@ -2212,17 +2374,22 @@
 	 * init as upper addresses are needed for init.
 	 * If fails, continue with alt-ioc processing
 	 */
+	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
+	    ioc->name));
 	if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
 		ret = -3;
 
 	/* May need to check/upload firmware & data here!
 	 * If fails, continue with alt-ioc processing
 	 */
+	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
+	    ioc->name));
 	if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
 		ret = -4;
 // NEW!
 	if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
-		printk(MYIOC_s_WARN_FMT ": alt_ioc (%d) FIFO mgmt alloc!\n",
+		printk(MYIOC_s_WARN_FMT
+		    ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
 		    ioc->alt_ioc->name, rc);
 		alt_ioc_ready = 0;
 		reset_alt_ioc_active = 0;
@@ -2232,8 +2399,9 @@
 		if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
 			alt_ioc_ready = 0;
 			reset_alt_ioc_active = 0;
-			printk(MYIOC_s_WARN_FMT "alt_ioc (%d) init failure!\n",
-			    ioc->alt_ioc->name, rc);
+			printk(MYIOC_s_WARN_FMT
+				": alt-ioc: (%d) init failure WARNING!\n",
+					ioc->alt_ioc->name, rc);
 		}
 	}
 
@@ -2269,28 +2437,36 @@
 		}
 	}
 
+	/*  Enable MPT base driver management of EventNotification
+	 *  and EventAck handling.
+	 */
+	if ((ret == 0) && (!ioc->facts.EventState)) {
+		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+			"SendEventNotification\n",
+		    ioc->name));
+		ret = SendEventNotification(ioc, 1, sleepFlag);	/* 1=Enable */
+	}
+
+	if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
+		rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
+
 	if (ret == 0) {
 		/* Enable! (reply interrupt) */
 		CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
 		ioc->active = 1;
 	}
-
-	if (reset_alt_ioc_active && ioc->alt_ioc) {
-		/* (re)Enable alt-IOC! (reply interrupt) */
-		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "alt_ioc reply irq re-enabled\n",
-		    ioc->alt_ioc->name));
-		CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
-		ioc->alt_ioc->active = 1;
+	if (rc == 0) {	/* alt ioc */
+		if (reset_alt_ioc_active && ioc->alt_ioc) {
+			/* (re)Enable alt-IOC! (reply interrupt) */
+			dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
+				"reply irq re-enabled\n",
+				ioc->alt_ioc->name));
+			CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
+				MPI_HIM_DIM);
+			ioc->alt_ioc->active = 1;
+		}
 	}
 
-	/*  Enable MPT base driver management of EventNotification
-	 *  and EventAck handling.
-	 */
-	if ((ret == 0) && (!ioc->facts.EventState))
-		(void) SendEventNotification(ioc, 1);	/* 1=Enable EventNotification */
-
-	if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
-		(void) SendEventNotification(ioc->alt_ioc, 1);	/* 1=Enable EventNotification */
 
 	/*	Add additional "reason" check before call to GetLanConfigPages
 	 *	(combined with GetIoUnitPage2 call).  This prevents a somewhat
@@ -2306,8 +2482,9 @@
 		mutex_init(&ioc->raid_data.inactive_list_mutex);
 		INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
 
-		if (ioc->bus_type == SAS) {
+		switch (ioc->bus_type) {
 
+		case SAS:
 			/* clear persistency table */
 			if(ioc->facts.IOCExceptions &
 			    MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
@@ -2321,8 +2498,15 @@
 			 */
 			mpt_findImVolumes(ioc);
 
-		} else if (ioc->bus_type == FC) {
-			if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
+			/* Check, and possibly reset, the coalescing value
+			 */
+			mpt_read_ioc_pg_1(ioc);
+
+			break;
+
+		case FC:
+			if ((ioc->pfacts[0].ProtocolFlags &
+				MPI_PORTFACTS_PROTOCOL_LAN) &&
 			    (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
 				/*
 				 *  Pre-fetch the ports LAN MAC address!
@@ -2331,11 +2515,14 @@
 				(void) GetLanConfigPages(ioc);
 				a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
 				dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-				    "LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
-				    ioc->name, a[5], a[4], a[3], a[2], a[1], a[0]));
-
+					"LanAddr = %02X:%02X:%02X"
+					":%02X:%02X:%02X\n",
+					ioc->name, a[5], a[4],
+					a[3], a[2], a[1], a[0]));
 			}
-		} else {
+			break;
+
+		case SPI:
 			/* Get NVRAM and adapter maximums from SPP 0 and 2
 			 */
 			mpt_GetScsiPortSettings(ioc, 0);
@@ -2354,6 +2541,8 @@
 			mpt_read_ioc_pg_1(ioc);
 
 			mpt_read_ioc_pg_4(ioc);
+
+			break;
 		}
 
 		GetIoUnitPage2(ioc);
@@ -2435,16 +2624,20 @@
 		if (_pcidev == peer) {
 			/* Paranoia checks */
 			if (ioc->alt_ioc != NULL) {
-				printk(MYIOC_s_WARN_FMT "Oops, already bound to %s!\n",
-					ioc->name, ioc->alt_ioc->name);
+				printk(MYIOC_s_WARN_FMT
+				    "Oops, already bound (%s <==> %s)!\n",
+				    ioc->name, ioc->name, ioc->alt_ioc->name);
 				break;
 			} else if (ioc_srch->alt_ioc != NULL) {
-				printk(MYIOC_s_WARN_FMT "Oops, already bound to %s!\n",
-					ioc_srch->name, ioc_srch->alt_ioc->name);
+				printk(MYIOC_s_WARN_FMT
+				    "Oops, already bound (%s <==> %s)!\n",
+				    ioc_srch->name, ioc_srch->name,
+				    ioc_srch->alt_ioc->name);
 				break;
 			}
-			dprintk(ioc, printk(MYIOC_s_INFO_FMT "FOUND! binding to %s\n",
-				ioc->name, ioc_srch->name));
+			dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+				"FOUND! binding %s <==> %s\n",
+				ioc->name, ioc->name, ioc_srch->name));
 			ioc_srch->alt_ioc = ioc;
 			ioc->alt_ioc = ioc_srch;
 		}
@@ -2464,8 +2657,8 @@
 	int ret;
 
 	if (ioc->cached_fw != NULL) {
-		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: Pushing FW onto "
-		    "adapter\n", __func__, ioc->name));
+		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"%s: Pushing FW onto adapter\n", __func__, ioc->name));
 		if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
 		    ioc->cached_fw, CAN_SLEEP)) < 0) {
 			printk(MYIOC_s_WARN_FMT
@@ -2474,11 +2667,30 @@
 		}
 	}
 
+	/*
+	 * Put the controller into ready state (if its not already)
+	 */
+	if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
+		if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
+		    CAN_SLEEP)) {
+			if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
+				printk(MYIOC_s_ERR_FMT "%s:  IOC msg unit "
+				    "reset failed to put ioc in ready state!\n",
+				    ioc->name, __func__);
+		} else
+			printk(MYIOC_s_ERR_FMT "%s:  IOC msg unit reset "
+			    "failed!\n", ioc->name, __func__);
+	}
+
+
 	/* Disable adapter interrupts! */
+	synchronize_irq(ioc->pcidev->irq);
 	CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
 	ioc->active = 0;
+
 	/* Clear any lingering interrupt */
 	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+	CHIPREG_READ32(&ioc->chip->IntStatus);
 
 	if (ioc->alloc != NULL) {
 		sz = ioc->alloc_sz;
@@ -2538,19 +2750,22 @@
 		if((ret = mpt_host_page_access_control(ioc,
 		    MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
 			printk(MYIOC_s_ERR_FMT
-			   "host page buffers free failed (%d)!\n",
-			    ioc->name, ret);
+			   ": %s: host page buffers free failed (%d)!\n",
+			    ioc->name, __func__, ret);
 		}
-		dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "HostPageBuffer free  @ %p, sz=%d bytes\n",
-		 	ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_sz));
+		dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"HostPageBuffer free  @ %p, sz=%d bytes\n",
+			ioc->name, ioc->HostPageBuffer,
+			ioc->HostPageBuffer_sz));
 		pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
 		    ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
 		ioc->HostPageBuffer = NULL;
 		ioc->HostPageBuffer_sz = 0;
 		ioc->alloc_total -= ioc->HostPageBuffer_sz;
 	}
-}
 
+	pci_set_drvdata(ioc->pcidev, NULL);
+}
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
  *	mpt_adapter_dispose - Free all resources associated with an MPT adapter
@@ -2690,8 +2905,12 @@
 	}
 
 	/* Is it already READY? */
-	if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
+	if (!statefault &&
+	    ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
+		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+		    "IOC is in READY state\n", ioc->name));
 		return 0;
+	}
 
 	/*
 	 *	Check to see if IOC is in FAULT state.
@@ -2764,8 +2983,9 @@
 
 		ii++; cntdn--;
 		if (!cntdn) {
-			printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n",
-					ioc->name, (int)((ii+5)/HZ));
+			printk(MYIOC_s_ERR_FMT
+				"Wait IOC_READY state (0x%x) timeout(%d)!\n",
+				ioc->name, ioc_state, (int)((ii+5)/HZ));
 			return -ETIME;
 		}
 
@@ -2778,9 +2998,8 @@
 	}
 
 	if (statefault < 3) {
-		printk(MYIOC_s_INFO_FMT "Recovered from %s\n",
-				ioc->name,
-				statefault==1 ? "stuck handshake" : "IOC FAULT");
+		printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
+			statefault == 1 ? "stuck handshake" : "IOC FAULT");
 	}
 
 	return hard_reset_done;
@@ -2833,8 +3052,9 @@
 
 	/* IOC *must* NOT be in RESET state! */
 	if (ioc->last_state == MPI_IOC_STATE_RESET) {
-		printk(MYIOC_s_ERR_FMT "Can't get IOCFacts NOT READY! (%08x)\n",
-		    ioc->name, ioc->last_state );
+		printk(KERN_ERR MYNAM
+		    ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
+		    ioc->name, ioc->last_state);
 		return -44;
 	}
 
@@ -2896,7 +3116,7 @@
 		 *	Old: u16{Major(4),Minor(4),SubMinor(8)}
 		 *	New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
 		 */
-		if (facts->MsgVersion < 0x0102) {
+		if (facts->MsgVersion < MPI_VERSION_01_02) {
 			/*
 			 *	Handle old FC f/w style, convert to new...
 			 */
@@ -2908,9 +3128,11 @@
 			facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
 
 		facts->ProductID = le16_to_cpu(facts->ProductID);
+
 		if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
 		    > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
 			ioc->ir_firmware = 1;
+
 		facts->CurrentHostMfaHighAddr =
 				le32_to_cpu(facts->CurrentHostMfaHighAddr);
 		facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
@@ -2926,7 +3148,7 @@
 		 * to 14 in MPI-1.01.0x.
 		 */
 		if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
-		    facts->MsgVersion > 0x0100) {
+		    facts->MsgVersion > MPI_VERSION_01_00) {
 			facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
 		}
 
@@ -3108,6 +3330,7 @@
 
 	ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
 	ioc_init.MaxBuses = (U8)ioc->number_of_buses;
+
 	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
 		   ioc->name, ioc->facts.MsgVersion));
 	if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
@@ -3122,7 +3345,7 @@
 	}
 	ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz);	/* in BYTES */
 
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		/* Save the upper 32-bits of the request
 		 * (reply) and sense buffers.
 		 */
@@ -3325,11 +3548,10 @@
 	FWUpload_t		*prequest;
 	FWUploadReply_t		*preply;
 	FWUploadTCSGE_t		*ptcsge;
-	int			 sgeoffset;
 	u32			 flagsLength;
 	int			 ii, sz, reply_sz;
 	int			 cmdStatus;
-
+	int			request_size;
 	/* If the image size is 0, we are done.
 	 */
 	if ((sz = ioc->facts.FWImageSize) == 0)
@@ -3364,42 +3586,41 @@
 	ptcsge->ImageSize = cpu_to_le32(sz);
 	ptcsge++;
 
-	sgeoffset = sizeof(FWUpload_t) - sizeof(SGE_MPI_UNION) + sizeof(FWUploadTCSGE_t);
-
 	flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
-	mpt_add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
-
-	sgeoffset += sizeof(u32) + sizeof(dma_addr_t);
-	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": Sending FW Upload (req @ %p) sgeoffset=%d \n",
-	    ioc->name, prequest, sgeoffset));
+	ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
+	request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
+	    ioc->SGE_size;
+	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
+	    " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
+	    ioc->facts.FWImageSize, request_size));
 	DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
 
-	ii = mpt_handshake_req_reply_wait(ioc, sgeoffset, (u32*)prequest,
-				reply_sz, (u16*)preply, 65 /*seconds*/, sleepFlag);
+	ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
+	    reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
 
-	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Upload completed rc=%x \n", ioc->name, ii));
+	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
+	    "rc=%x \n", ioc->name, ii));
 
 	cmdStatus = -EFAULT;
 	if (ii == 0) {
 		/* Handshake transfer was complete and successful.
 		 * Check the Reply Frame.
 		 */
-		int status, transfer_sz;
-		status = le16_to_cpu(preply->IOCStatus);
-		if (status == MPI_IOCSTATUS_SUCCESS) {
-			transfer_sz = le32_to_cpu(preply->ActualImageSize);
-			if (transfer_sz == sz)
+		int status;
+		status = le16_to_cpu(preply->IOCStatus) &
+				MPI_IOCSTATUS_MASK;
+		if (status == MPI_IOCSTATUS_SUCCESS &&
+		    ioc->facts.FWImageSize ==
+		    le32_to_cpu(preply->ActualImageSize))
 				cmdStatus = 0;
-		}
 	}
 	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
 			ioc->name, cmdStatus));
 
 
 	if (cmdStatus) {
-
-		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": fw upload failed, freeing image \n",
-			ioc->name));
+		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
+		    "freeing image \n", ioc->name));
 		mpt_free_fw_memory(ioc);
 	}
 	kfree(prequest);
@@ -3723,6 +3944,10 @@
 	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
 
 	if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
+
+		if (!ignore)
+			return 0;
+
 		drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
 			"address=%p\n",  ioc->name, __func__,
 			&ioc->chip->Doorbell, &ioc->chip->Reset_1078));
@@ -3740,6 +3965,7 @@
 				"looking for READY STATE: doorbell=%x"
 			        " count=%d\n",
 				ioc->name, doorbell, count));
+
 			if (doorbell == MPI_IOC_STATE_READY) {
 				return 1;
 			}
@@ -3890,6 +4116,10 @@
 				doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
 				doorbell &= MPI_IOC_STATE_MASK;
 
+				drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+				    "looking for READY STATE: doorbell=%x"
+				    " count=%d\n", ioc->name, doorbell, count));
+
 				if (doorbell == MPI_IOC_STATE_READY) {
 					break;
 				}
@@ -3901,6 +4131,11 @@
 					mdelay (1000);
 				}
 			}
+
+			if (doorbell != MPI_IOC_STATE_READY)
+				printk(MYIOC_s_ERR_FMT "Failed to come READY "
+				    "after reset! IocState=%x", ioc->name,
+				    doorbell);
 		}
 	}
 
@@ -4019,8 +4254,9 @@
 			if (sleepFlag != CAN_SLEEP)
 				count *= 10;
 
-			printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n",
-			    ioc->name, (int)((count+5)/HZ));
+			printk(MYIOC_s_ERR_FMT
+			    "Wait IOC_READY state (0x%x) timeout(%d)!\n",
+			    ioc->name, state, (int)((count+5)/HZ));
 			return -ETIME;
 		}
 
@@ -4090,24 +4326,29 @@
 	 * num_sge = num sge in request frame + last chain buffer
 	 * scale = num sge per chain buffer if no chain element
 	 */
-	scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
-	if (sizeof(dma_addr_t) == sizeof(u64))
-		num_sge =  scale + (ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
+	scale = ioc->req_sz / ioc->SGE_size;
+	if (ioc->sg_addr_size == sizeof(u64))
+		num_sge =  scale + (ioc->req_sz - 60) / ioc->SGE_size;
 	else
-		num_sge =  1+ scale + (ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
+		num_sge =  1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
 
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
-			(ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
+			(ioc->req_sz - 60) / ioc->SGE_size;
 	} else {
-		numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
-			(ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
+		numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
+		    scale + (ioc->req_sz - 64) / ioc->SGE_size;
 	}
 	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
 		ioc->name, num_sge, numSGE));
 
-	if ( numSGE > MPT_SCSI_SG_DEPTH	)
-		numSGE = MPT_SCSI_SG_DEPTH;
+	if (ioc->bus_type == FC) {
+		if (numSGE > MPT_SCSI_FC_SG_DEPTH)
+			numSGE = MPT_SCSI_FC_SG_DEPTH;
+	} else {
+		if (numSGE > MPT_SCSI_SG_DEPTH)
+			numSGE = MPT_SCSI_SG_DEPTH;
+	}
 
 	num_chain = 1;
 	while (numSGE - num_sge > 0) {
@@ -4161,12 +4402,42 @@
 	dma_addr_t alloc_dma;
 	u8 *mem;
 	int i, reply_sz, sz, total_size, num_chain;
+	u64	dma_mask;
+
+	dma_mask = 0;
 
 	/*  Prime reply FIFO...  */
 
 	if (ioc->reply_frames == NULL) {
 		if ( (num_chain = initChainBuffers(ioc)) < 0)
 			return -1;
+		/*
+		 * 1078 errata workaround for the 36GB limitation
+		 */
+		if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
+		    ioc->dma_mask > DMA_35BIT_MASK) {
+			if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
+			    && !pci_set_consistent_dma_mask(ioc->pcidev,
+			    DMA_BIT_MASK(32))) {
+				dma_mask = DMA_35BIT_MASK;
+				d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+				    "setting 35 bit addressing for "
+				    "Request/Reply/Chain and Sense Buffers\n",
+				    ioc->name));
+			} else {
+				/*Reseting DMA mask to 64 bit*/
+				pci_set_dma_mask(ioc->pcidev,
+					DMA_BIT_MASK(64));
+				pci_set_consistent_dma_mask(ioc->pcidev,
+					DMA_BIT_MASK(64));
+
+				printk(MYIOC_s_ERR_FMT
+				    "failed setting 35 bit addressing for "
+				    "Request/Reply/Chain and Sense Buffers\n",
+				    ioc->name);
+				return -1;
+			}
+		}
 
 		total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
 		dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
@@ -4305,9 +4576,16 @@
 		alloc_dma += ioc->reply_sz;
 	}
 
+	if (dma_mask == DMA_35BIT_MASK && !pci_set_dma_mask(ioc->pcidev,
+	    ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
+	    ioc->dma_mask))
+		d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "restoring 64 bit addressing\n", ioc->name));
+
 	return 0;
 
 out_fail:
+
 	if (ioc->alloc != NULL) {
 		sz = ioc->alloc_sz;
 		pci_free_consistent(ioc->pcidev,
@@ -4324,6 +4602,13 @@
 				ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
 		ioc->sense_buf_pool = NULL;
 	}
+
+	if (dma_mask == DMA_35BIT_MASK && !pci_set_dma_mask(ioc->pcidev,
+	    DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
+	    DMA_BIT_MASK(64)))
+		d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "restoring 64 bit addressing\n", ioc->name));
+
 	return -1;
 }
 
@@ -4759,7 +5044,14 @@
 	SasIoUnitControlReply_t		*sasIoUnitCntrReply;
 	MPT_FRAME_HDR			*mf = NULL;
 	MPIHeader_t			*mpi_hdr;
+	int				ret = 0;
+	unsigned long 	 		timeleft;
 
+	mutex_lock(&ioc->mptbase_cmds.mutex);
+
+	/* init the internal cmd struct */
+	memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
+	INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
 
 	/* insure garbage is not sent to fw */
 	switch(persist_opcode) {
@@ -4769,17 +5061,19 @@
 		break;
 
 	default:
-		return -1;
-		break;
+		ret = -1;
+		goto out;
 	}
 
-	printk("%s: persist_opcode=%x\n",__func__, persist_opcode);
+	printk(KERN_DEBUG  "%s: persist_opcode=%x\n",
+		__func__, persist_opcode);
 
 	/* Get a MF for this command.
 	 */
 	if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
-		printk("%s: no msg frames!\n",__func__);
-		return -1;
+		printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
+		ret = -1;
+		goto out;
         }
 
 	mpi_hdr = (MPIHeader_t *) mf;
@@ -4789,27 +5083,42 @@
 	sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
 	sasIoUnitCntrReq->Operation = persist_opcode;
 
-	init_timer(&ioc->persist_timer);
-	ioc->persist_timer.data = (unsigned long) ioc;
-	ioc->persist_timer.function = mpt_timer_expired;
-	ioc->persist_timer.expires = jiffies + HZ*10 /* 10 sec */;
-	ioc->persist_wait_done=0;
-	add_timer(&ioc->persist_timer);
 	mpt_put_msg_frame(mpt_base_index, ioc, mf);
-	wait_event(mpt_waitq, ioc->persist_wait_done);
-
-	sasIoUnitCntrReply =
-	    (SasIoUnitControlReply_t *)ioc->persist_reply_frame;
-	if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
-		printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
-		    __func__,
-		    sasIoUnitCntrReply->IOCStatus,
-		    sasIoUnitCntrReply->IOCLogInfo);
-		return -1;
+	timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
+	if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = -ETIME;
+		printk(KERN_DEBUG "%s: failed\n", __func__);
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		if (!timeleft) {
+			printk(KERN_DEBUG "%s: Issuing Reset from %s!!\n",
+			    ioc->name, __func__);
+			mpt_HardResetHandler(ioc, CAN_SLEEP);
+			mpt_free_msg_frame(ioc, mf);
+		}
+		goto out;
 	}
 
-	printk("%s: success\n",__func__);
-	return 0;
+	if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		ret = -1;
+		goto out;
+	}
+
+	sasIoUnitCntrReply =
+	    (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
+	if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
+		printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
+		    __func__, sasIoUnitCntrReply->IOCStatus,
+		    sasIoUnitCntrReply->IOCLogInfo);
+		printk(KERN_DEBUG "%s: failed\n", __func__);
+		ret = -1;
+	} else
+		printk(KERN_DEBUG "%s: success\n", __func__);
+ out:
+
+	CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
+	mutex_unlock(&ioc->mptbase_cmds.mutex);
+	return ret;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5394,17 +5703,20 @@
  *	-ENOMEM if pci_alloc failed
  **/
 int
-mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk)
+mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
+			RaidPhysDiskPage0_t *phys_disk)
 {
-	CONFIGPARMS		 	cfg;
-	ConfigPageHeader_t	 	hdr;
+	CONFIGPARMS			cfg;
+	ConfigPageHeader_t		hdr;
 	dma_addr_t			dma_handle;
 	pRaidPhysDiskPage0_t		buffer = NULL;
 	int				rc;
 
 	memset(&cfg, 0 , sizeof(CONFIGPARMS));
 	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+	memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
 
+	hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
 	hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
 	cfg.cfghdr.hdr = &hdr;
 	cfg.physAddr = -1;
@@ -5451,6 +5763,161 @@
 }
 
 /**
+ *	mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
+ *	@ioc: Pointer to a Adapter Structure
+ *	@phys_disk_num: io unit unique phys disk num generated by the ioc
+ *
+ *	Return:
+ *	returns number paths
+ **/
+int
+mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
+{
+	CONFIGPARMS		 	cfg;
+	ConfigPageHeader_t	 	hdr;
+	dma_addr_t			dma_handle;
+	pRaidPhysDiskPage1_t		buffer = NULL;
+	int				rc;
+
+	memset(&cfg, 0 , sizeof(CONFIGPARMS));
+	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+
+	hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
+	hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+	hdr.PageNumber = 1;
+	cfg.cfghdr.hdr = &hdr;
+	cfg.physAddr = -1;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+	if (mpt_config(ioc, &cfg) != 0) {
+		rc = 0;
+		goto out;
+	}
+
+	if (!hdr.PageLength) {
+		rc = 0;
+		goto out;
+	}
+
+	buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+	    &dma_handle);
+
+	if (!buffer) {
+		rc = 0;
+		goto out;
+	}
+
+	cfg.physAddr = dma_handle;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+	cfg.pageAddr = phys_disk_num;
+
+	if (mpt_config(ioc, &cfg) != 0) {
+		rc = 0;
+		goto out;
+	}
+
+	rc = buffer->NumPhysDiskPaths;
+ out:
+
+	if (buffer)
+		pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+		    dma_handle);
+
+	return rc;
+}
+EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
+
+/**
+ *	mpt_raid_phys_disk_pg1 - returns phys disk page 1
+ *	@ioc: Pointer to a Adapter Structure
+ *	@phys_disk_num: io unit unique phys disk num generated by the ioc
+ *	@phys_disk: requested payload data returned
+ *
+ *	Return:
+ *	0 on success
+ *	-EFAULT if read of config page header fails or data pointer not NULL
+ *	-ENOMEM if pci_alloc failed
+ **/
+int
+mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
+		RaidPhysDiskPage1_t *phys_disk)
+{
+	CONFIGPARMS		 	cfg;
+	ConfigPageHeader_t	 	hdr;
+	dma_addr_t			dma_handle;
+	pRaidPhysDiskPage1_t		buffer = NULL;
+	int				rc;
+	int				i;
+	__le64				sas_address;
+
+	memset(&cfg, 0 , sizeof(CONFIGPARMS));
+	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+	rc = 0;
+
+	hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
+	hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+	hdr.PageNumber = 1;
+	cfg.cfghdr.hdr = &hdr;
+	cfg.physAddr = -1;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+	if (mpt_config(ioc, &cfg) != 0) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	if (!hdr.PageLength) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+	    &dma_handle);
+
+	if (!buffer) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	cfg.physAddr = dma_handle;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+	cfg.pageAddr = phys_disk_num;
+
+	if (mpt_config(ioc, &cfg) != 0) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
+	phys_disk->PhysDiskNum = phys_disk_num;
+	for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
+		phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
+		phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
+		phys_disk->Path[i].OwnerIdentifier =
+				buffer->Path[i].OwnerIdentifier;
+		phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
+		memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
+		sas_address = le64_to_cpu(sas_address);
+		memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
+		memcpy(&sas_address,
+				&buffer->Path[i].OwnerWWID, sizeof(__le64));
+		sas_address = le64_to_cpu(sas_address);
+		memcpy(&phys_disk->Path[i].OwnerWWID,
+				&sas_address, sizeof(__le64));
+	}
+
+ out:
+
+	if (buffer)
+		pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+		    dma_handle);
+
+	return rc;
+}
+EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
+
+
+/**
  *	mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
  *	@ioc: Pointer to a Adapter Strucutre
  *
@@ -5775,30 +6242,28 @@
  *	SendEventNotification - Send EventNotification (on or off) request to adapter
  *	@ioc: Pointer to MPT_ADAPTER structure
  *	@EvSwitch: Event switch flags
+ *	@sleepFlag: Specifies whether the process can sleep
  */
 static int
-SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch)
+SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
 {
-	EventNotification_t	*evnp;
+	EventNotification_t	evn;
+	MPIDefaultReply_t	reply_buf;
 
-	evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc);
-	if (evnp == NULL) {
-		devtverboseprintk(ioc, printk(MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
-				ioc->name));
-		return 0;
-	}
-	memset(evnp, 0, sizeof(*evnp));
+	memset(&evn, 0, sizeof(EventNotification_t));
+	memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
 
-	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventNotification (%d) request %p\n", ioc->name, EvSwitch, evnp));
+	evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
+	evn.Switch = EvSwitch;
+	evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
 
-	evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
-	evnp->ChainOffset = 0;
-	evnp->MsgFlags = 0;
-	evnp->Switch = EvSwitch;
+	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "Sending EventNotification (%d) request %p\n",
+	    ioc->name, EvSwitch, &evn));
 
-	mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)evnp);
-
-	return 0;
+	return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
+	    (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
+	    sleepFlag);
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5814,7 +6279,7 @@
 
 	if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
-		    ioc->name,__func__));
+		    ioc->name, __func__));
 		return -1;
 	}
 
@@ -5851,12 +6316,19 @@
 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 {
 	Config_t	*pReq;
+	ConfigReply_t	*pReply;
 	ConfigExtendedPageHeader_t  *pExtHdr = NULL;
 	MPT_FRAME_HDR	*mf;
-	unsigned long	 flags;
-	int		 ii, rc;
+	int		 ii;
 	int		 flagsLength;
-	int		 in_isr;
+	long		 timeout;
+	int		 ret;
+	u8		 page_type = 0, extend_page;
+	unsigned long 	 timeleft;
+	unsigned long	 flags;
+    int		 in_isr;
+	u8		 issue_hard_reset = 0;
+	u8		 retry_count = 0;
 
 	/*	Prevent calling wait_event() (below), if caller happens
 	 *	to be in ISR context, because that is fatal!
@@ -5866,15 +6338,43 @@
 		dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
 				ioc->name));
 		return -EPERM;
+    }
+
+	/* don't send a config page during diag reset */
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: busy with host reset\n", ioc->name, __func__));
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		return -EBUSY;
 	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+	/* don't send if no chance of success */
+	if (!ioc->active ||
+	    mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: ioc not operational, %d, %xh\n",
+		    ioc->name, __func__, ioc->active,
+		    mpt_GetIocState(ioc, 0)));
+		return -EFAULT;
+	}
+
+ retry_config:
+	mutex_lock(&ioc->mptbase_cmds.mutex);
+	/* init the internal cmd struct */
+	memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
+	INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
 
 	/* Get and Populate a free Frame
 	 */
 	if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
-		dcprintk(ioc, printk(MYIOC_s_WARN_FMT "mpt_config: no msg frames!\n",
-				ioc->name));
-		return -EAGAIN;
+		dcprintk(ioc, printk(MYIOC_s_WARN_FMT
+		"mpt_config: no msg frames!\n", ioc->name));
+		ret = -EAGAIN;
+		goto out;
 	}
+
 	pReq = (Config_t *)mf;
 	pReq->Action = pCfg->action;
 	pReq->Reserved = 0;
@@ -5900,7 +6400,9 @@
 		pReq->ExtPageType = pExtHdr->ExtPageType;
 		pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
 
-		/* Page Length must be treated as a reserved field for the extended header. */
+		/* Page Length must be treated as a reserved field for the
+		 * extended header.
+		 */
 		pReq->Header.PageLength = 0;
 	}
 
@@ -5913,78 +6415,91 @@
 	else
 		flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
 
-	if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
+	if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
+	    MPI_CONFIG_PAGETYPE_EXTENDED) {
 		flagsLength |= pExtHdr->ExtPageLength * 4;
-
-		dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Config request type %d, page %d and action %d\n",
-			ioc->name, pReq->ExtPageType, pReq->Header.PageNumber, pReq->Action));
-	}
-	else {
+		page_type = pReq->ExtPageType;
+		extend_page = 1;
+	} else {
 		flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
-
-		dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Config request type %d, page %d and action %d\n",
-			ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action));
+		page_type = pReq->Header.PageType;
+		extend_page = 0;
 	}
 
-	mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
+	dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "Sending Config request type 0x%x, page 0x%x and action %d\n",
+	    ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
 
-	/* Append pCfg pointer to end of mf
-	 */
-	*((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) =  (void *) pCfg;
-
-	/* Initalize the timer
-	 */
-	init_timer_on_stack(&pCfg->timer);
-	pCfg->timer.data = (unsigned long) ioc;
-	pCfg->timer.function = mpt_timer_expired;
-	pCfg->wait_done = 0;
-
-	/* Set the timer; ensure 10 second minimum */
-	if (pCfg->timeout < 10)
-		pCfg->timer.expires = jiffies + HZ*10;
-	else
-		pCfg->timer.expires = jiffies + HZ*pCfg->timeout;
-
-	/* Add to end of Q, set timer and then issue this command */
-	spin_lock_irqsave(&ioc->FreeQlock, flags);
-	list_add_tail(&pCfg->linkage, &ioc->configQ);
-	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-	add_timer(&pCfg->timer);
+	ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
+	timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
 	mpt_put_msg_frame(mpt_base_index, ioc, mf);
-	wait_event(mpt_waitq, pCfg->wait_done);
+	timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
+		timeout);
+	if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = -ETIME;
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "Failed Sending Config request type 0x%x, page 0x%x,"
+		    " action %d, status %xh, time left %ld\n\n",
+			ioc->name, page_type, pReq->Header.PageNumber,
+			pReq->Action, ioc->mptbase_cmds.status, timeleft));
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		if (!timeleft)
+			issue_hard_reset = 1;
+		goto out;
+	}
 
-	/* mf has been freed - do not access */
+	if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		ret = -1;
+		goto out;
+	}
+	pReply = (ConfigReply_t	*)ioc->mptbase_cmds.reply;
+	ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+	if (ret == MPI_IOCSTATUS_SUCCESS) {
+		if (extend_page) {
+			pCfg->cfghdr.ehdr->ExtPageLength =
+			    le16_to_cpu(pReply->ExtPageLength);
+			pCfg->cfghdr.ehdr->ExtPageType =
+			    pReply->ExtPageType;
+		}
+		pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
+		pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
+		pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
+		pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
 
-	rc = pCfg->status;
+	}
 
-	return rc;
-}
+	if (retry_count)
+		printk(MYIOC_s_INFO_FMT "Retry completed "
+		    "ret=0x%x timeleft=%ld\n",
+		    ioc->name, ret, timeleft);
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mpt_timer_expired - Callback for timer process.
- *	Used only internal config functionality.
- *	@data: Pointer to MPT_SCSI_HOST recast as an unsigned long
- */
-static void
-mpt_timer_expired(unsigned long data)
-{
-	MPT_ADAPTER *ioc = (MPT_ADAPTER *) data;
+	dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
+	     ret, le32_to_cpu(pReply->IOCLogInfo)));
 
-	dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_timer_expired! \n", ioc->name));
+out:
 
-	/* Perform a FW reload */
-	if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
-		printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", ioc->name);
+	CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
+	mutex_unlock(&ioc->mptbase_cmds.mutex);
+	if (issue_hard_reset) {
+		issue_hard_reset = 0;
+		printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+		    ioc->name, __func__);
+		mpt_HardResetHandler(ioc, CAN_SLEEP);
+		mpt_free_msg_frame(ioc, mf);
+		/* attempt one retry for a timed out command */
+		if (!retry_count) {
+			printk(MYIOC_s_INFO_FMT
+			    "Attempting Retry Config request"
+			    " type 0x%x, page 0x%x,"
+			    " action %d\n", ioc->name, page_type,
+			    pCfg->cfghdr.hdr->PageNumber, pCfg->action);
+			retry_count++;
+			goto retry_config;
+		}
+	}
+	return ret;
 
-	/* No more processing.
-	 * Hard reset clean-up will wake up
-	 * process and free all resources.
-	 */
-	dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_timer_expired complete!\n", ioc->name));
-
-	return;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5998,41 +6513,34 @@
 static int
 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
-	CONFIGPARMS *pCfg;
-	unsigned long flags;
-
-	dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-	    ": IOC %s_reset routed to MPT base driver!\n",
-	    ioc->name, reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
-	    reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
-
-	if (reset_phase == MPT_IOC_SETUP_RESET) {
-		;
-	} else if (reset_phase == MPT_IOC_PRE_RESET) {
-		/* If the internal config Q is not empty -
-		 * delete timer. MF resources will be freed when
-		 * the FIFO's are primed.
-		 */
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		list_for_each_entry(pCfg, &ioc->configQ, linkage)
-			del_timer(&pCfg->timer);
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-	} else {
-		CONFIGPARMS *pNext;
-
-		/* Search the configQ for internal commands.
-		 * Flush the Q, and wake up all suspended threads.
-		 */
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		list_for_each_entry_safe(pCfg, pNext, &ioc->configQ, linkage) {
-			list_del(&pCfg->linkage);
-
-			pCfg->status = MPT_CONFIG_ERROR;
-			pCfg->wait_done = 1;
-			wake_up(&mpt_waitq);
+	switch (reset_phase) {
+	case MPT_IOC_SETUP_RESET:
+		ioc->taskmgmt_quiesce_io = 1;
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_POST_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_POST_RESET\n",  ioc->name, __func__));
+/* wake up mptbase_cmds */
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->mptbase_cmds.status |=
+			    MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->mptbase_cmds.done);
 		}
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+/* wake up taskmgmt_cmds */
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->taskmgmt_cmds.status |=
+				MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->taskmgmt_cmds.done);
+		}
+		break;
+	default:
+		break;
 	}
 
 	return 1;		/* currently means nothing really */
@@ -6344,6 +6852,59 @@
 
 	*size = y;
 }
+/**
+ *	mpt_set_taskmgmt_in_progress_flag - set flags associated with task managment
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ *	Returns 0 for SUCCESS or -1 if FAILED.
+ *
+ *	If -1 is return, then it was not possible to set the flags
+ **/
+int
+mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
+{
+	unsigned long	 flags;
+	int		 retval;
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
+	    (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
+		retval = -1;
+		goto out;
+	}
+	retval = 0;
+	ioc->taskmgmt_in_progress = 1;
+	ioc->taskmgmt_quiesce_io = 1;
+	if (ioc->alt_ioc) {
+		ioc->alt_ioc->taskmgmt_in_progress = 1;
+		ioc->alt_ioc->taskmgmt_quiesce_io = 1;
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+	return retval;
+}
+EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
+
+/**
+ *	mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task managment
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+void
+mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
+{
+	unsigned long	 flags;
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	ioc->taskmgmt_in_progress = 0;
+	ioc->taskmgmt_quiesce_io = 0;
+	if (ioc->alt_ioc) {
+		ioc->alt_ioc->taskmgmt_in_progress = 0;
+		ioc->alt_ioc->taskmgmt_quiesce_io = 0;
+	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+}
+EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
 
 
 /**
@@ -6397,7 +6958,9 @@
 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 {
 	int		 rc;
+	u8	 cb_idx;
 	unsigned long	 flags;
+	unsigned long	 time_count;
 
 	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
 #ifdef MFCNT
@@ -6410,14 +6973,15 @@
 	/* Reset the adapter. Prevent more than 1 call to
 	 * mpt_do_ioc_recovery at any instant in time.
 	 */
-	spin_lock_irqsave(&ioc->diagLock, flags);
-	if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)){
-		spin_unlock_irqrestore(&ioc->diagLock, flags);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 		return 0;
-	} else {
-		ioc->diagPending = 1;
 	}
-	spin_unlock_irqrestore(&ioc->diagLock, flags);
+	ioc->ioc_reset_in_progress = 1;
+	if (ioc->alt_ioc)
+		ioc->alt_ioc->ioc_reset_in_progress = 1;
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
 	/* FIXME: If do_ioc_recovery fails, repeat....
 	 */
@@ -6427,47 +6991,57 @@
 	 * Prevents timeouts occurring during a diagnostic reset...very bad.
 	 * For all other protocol drivers, this is a no-op.
 	 */
-	{
-		u8	 cb_idx;
-		int	 r = 0;
-
-		for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
-			if (MptResetHandlers[cb_idx]) {
-				dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling IOC reset_setup handler #%d\n",
-						ioc->name, cb_idx));
-				r += mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
-				if (ioc->alt_ioc) {
-					dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling alt-%s setup reset handler #%d\n",
-							ioc->name, ioc->alt_ioc->name, cb_idx));
-					r += mpt_signal_reset(cb_idx, ioc->alt_ioc, MPT_IOC_SETUP_RESET);
-				}
-			}
+	for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+		if (MptResetHandlers[cb_idx]) {
+			mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
+			if (ioc->alt_ioc)
+				mpt_signal_reset(cb_idx, ioc->alt_ioc,
+					MPT_IOC_SETUP_RESET);
 		}
 	}
 
-	if ((rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag)) != 0) {
-		printk(MYIOC_s_WARN_FMT "Cannot recover rc = %d!\n", ioc->name, rc);
+	time_count = jiffies;
+	rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
+	if (rc != 0) {
+		printk(KERN_WARNING MYNAM
+		    ": WARNING - (%d) Cannot recover %s\n", rc, ioc->name);
+	} else {
+		if (ioc->hard_resets < -1)
+			ioc->hard_resets++;
 	}
-	ioc->reload_fw = 0;
-	if (ioc->alt_ioc)
-		ioc->alt_ioc->reload_fw = 0;
 
-	spin_lock_irqsave(&ioc->diagLock, flags);
-	ioc->diagPending = 0;
-	if (ioc->alt_ioc)
-		ioc->alt_ioc->diagPending = 0;
-	spin_unlock_irqrestore(&ioc->diagLock, flags);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	ioc->ioc_reset_in_progress = 0;
+	ioc->taskmgmt_quiesce_io = 0;
+	ioc->taskmgmt_in_progress = 0;
+	if (ioc->alt_ioc) {
+		ioc->alt_ioc->ioc_reset_in_progress = 0;
+		ioc->alt_ioc->taskmgmt_quiesce_io = 0;
+		ioc->alt_ioc->taskmgmt_in_progress = 0;
+	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler rc = %d!\n", ioc->name, rc));
+	dtmprintk(ioc,
+	    printk(MYIOC_s_DEBUG_FMT
+		"HardResetHandler: completed (%d seconds): %s\n", ioc->name,
+		jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
+		"SUCCESS" : "FAILED")));
 
 	return rc;
 }
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+#ifdef CONFIG_FUSION_LOGGING
 static void
-EventDescriptionStr(u8 event, u32 evData0, char *evStr)
+mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
 {
 	char *ds = NULL;
+	u32 evData0;
+	int ii;
+	u8 event;
+	char *evStr = ioc->evStr;
+
+	event = le32_to_cpu(pEventReply->Event) & 0xFF;
+	evData0 = le32_to_cpu(pEventReply->Data[0]);
 
 	switch(event) {
 	case MPI_EVENT_NONE:
@@ -6501,9 +7075,9 @@
 		if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
 			ds = "Loop State(LIP) Change";
 		else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
-			ds = "Loop State(LPE) Change";		/* ??? */
+			ds = "Loop State(LPE) Change";
 		else
-			ds = "Loop State(LPB) Change";		/* ??? */
+			ds = "Loop State(LPB) Change";
 		break;
 	case MPI_EVENT_LOGOUT:
 		ds = "Logout";
@@ -6703,28 +7277,65 @@
 	}
 	case MPI_EVENT_IR2:
 	{
+		u8 id = (u8)(evData0);
+		u8 channel = (u8)(evData0 >> 8);
+		u8 phys_num = (u8)(evData0 >> 24);
 		u8 ReasonCode = (u8)(evData0 >> 16);
+
 		switch (ReasonCode) {
 		case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
-			ds = "IR2: LD State Changed";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: LD State Changed: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
-			ds = "IR2: PD State Changed";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: PD State Changed "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
-			ds = "IR2: Bad Block Table Full";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Bad Block Table Full: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_PD_INSERTED:
-			ds = "IR2: PD Inserted";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: PD Inserted: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_PD_REMOVED:
-			ds = "IR2: PD Removed";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: PD Removed: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
-			ds = "IR2: Foreign CFG Detected";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Foreign CFG Detected: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
-			ds = "IR2: Rebuild Medium Error";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Rebuild Medium Error: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
+			break;
+		case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Dual Port Added: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
+			break;
+		case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Dual Port Removed: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		default:
 			ds = "IR2";
@@ -6760,13 +7371,18 @@
 	case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
 	{
 		u8 reason = (u8)(evData0);
-		u8 port_num = (u8)(evData0 >> 8);
-		u16 handle = le16_to_cpu(evData0 >> 16);
 
-		snprintf(evStr, EVENT_DESCR_STR_SZ,
-		    "SAS Initiator Device Status Change: reason=0x%02x "
-		    "port=%d handle=0x%04x",
-		    reason, port_num, handle);
+		switch (reason) {
+		case MPI_EVENT_SAS_INIT_RC_ADDED:
+			ds = "SAS Initiator Status Change: Added";
+			break;
+		case MPI_EVENT_SAS_INIT_RC_REMOVED:
+			ds = "SAS Initiator Status Change: Deleted";
+			break;
+		default:
+			ds = "SAS Initiator Status Change";
+			break;
+		}
 		break;
 	}
 
@@ -6814,6 +7430,24 @@
 		break;
 	}
 
+	case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+	{
+		u8 reason = (u8)(evData0);
+
+		switch (reason) {
+		case MPI_EVENT_SAS_EXP_RC_ADDED:
+			ds = "Expander Status Change: Added";
+			break;
+		case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
+			ds = "Expander Status Change: Deleted";
+			break;
+		default:
+			ds = "Expander Status Change";
+			break;
+		}
+		break;
+	}
+
 	/*
 	 *  MPT base "custom" events may be added here...
 	 */
@@ -6823,8 +7457,20 @@
 	}
 	if (ds)
 		strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
-}
 
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "MPT event:(%02Xh) : %s\n",
+	    ioc->name, event, evStr));
+
+	devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
+	    ": Event data:\n"));
+	for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
+		devtverboseprintk(ioc, printk(" %08x",
+		    le32_to_cpu(pEventReply->Data[ii])));
+	devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
+}
+#endif
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
  *	ProcessEventNotification - Route EventNotificationReply to all event handlers
@@ -6841,37 +7487,24 @@
 {
 	u16 evDataLen;
 	u32 evData0 = 0;
-//	u32 evCtx;
 	int ii;
 	u8 cb_idx;
 	int r = 0;
 	int handlers = 0;
-	char evStr[EVENT_DESCR_STR_SZ];
 	u8 event;
 
 	/*
 	 *  Do platform normalization of values
 	 */
 	event = le32_to_cpu(pEventReply->Event) & 0xFF;
-//	evCtx = le32_to_cpu(pEventReply->EventContext);
 	evDataLen = le16_to_cpu(pEventReply->EventDataLength);
 	if (evDataLen) {
 		evData0 = le32_to_cpu(pEventReply->Data[0]);
 	}
 
-	EventDescriptionStr(event, evData0, evStr);
-	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MPT event:(%02Xh) : %s\n",
-			ioc->name,
-			event,
-			evStr));
-
 #ifdef CONFIG_FUSION_LOGGING
-	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-	    ": Event data:\n", ioc->name));
-	for (ii = 0; ii < evDataLen; ii++)
-		devtverboseprintk(ioc, printk(" %08x",
-		    le32_to_cpu(pEventReply->Data[ii])));
-	devtverboseprintk(ioc, printk("\n"));
+	if (evDataLen)
+		mpt_display_event_info(ioc, pEventReply);
 #endif
 
 	/*
@@ -6926,8 +7559,9 @@
 	 */
 	for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
 		if (MptEvHandlers[cb_idx]) {
-			devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Routing Event to event handler #%d\n",
-					ioc->name, cb_idx));
+			devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			    "Routing Event to event handler #%d\n",
+			    ioc->name, cb_idx));
 			r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
 			handlers++;
 		}
@@ -7011,8 +7645,6 @@
 	switch (info) {
 	case 0x00010000:
 		desc = "bug! MID not found";
-		if (ioc->reload_fw == 0)
-			ioc->reload_fw++;
 		break;
 
 	case 0x00020000:
@@ -7613,7 +8245,6 @@
 EXPORT_SYMBOL(mpt_put_msg_frame);
 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
 EXPORT_SYMBOL(mpt_free_msg_frame);
-EXPORT_SYMBOL(mpt_add_sge);
 EXPORT_SYMBOL(mpt_send_handshake_request);
 EXPORT_SYMBOL(mpt_verify_adapter);
 EXPORT_SYMBOL(mpt_GetIocState);
@@ -7650,7 +8281,7 @@
 	/*  Register ourselves (mptbase) in order to facilitate
 	 *  EventNotification handling.
 	 */
-	mpt_base_index = mpt_register(mpt_base_reply, MPTBASE_DRIVER);
+	mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER);
 
 	/* Register for hard reset handling callbacks.
 	 */
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index b3e981d..1c8514d 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2008 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.04.07"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.07"
+#define MPT_LINUX_VERSION_COMMON	"3.04.10"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.09"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -104,6 +104,7 @@
 #endif
 
 #define MPT_NAME_LENGTH			32
+#define MPT_KOBJ_NAME_LEN		20
 
 #define MPT_PROCFS_MPTBASEDIR		"mpt"
 						/* chg it to "driver/fusion" ? */
@@ -134,6 +135,7 @@
 
 #define MPT_COALESCING_TIMEOUT		0x10
 
+
 /*
  * SCSI transfer rate defines.
  */
@@ -161,10 +163,10 @@
 /*
  * Set the MAX_SGE value based on user input.
  */
-#ifdef  CONFIG_FUSION_MAX_SGE
-#if     CONFIG_FUSION_MAX_SGE  < 16
+#ifdef CONFIG_FUSION_MAX_SGE
+#if CONFIG_FUSION_MAX_SGE  < 16
 #define MPT_SCSI_SG_DEPTH	16
-#elif   CONFIG_FUSION_MAX_SGE  > 128
+#elif CONFIG_FUSION_MAX_SGE  > 128
 #define MPT_SCSI_SG_DEPTH	128
 #else
 #define MPT_SCSI_SG_DEPTH	CONFIG_FUSION_MAX_SGE
@@ -173,6 +175,18 @@
 #define MPT_SCSI_SG_DEPTH	40
 #endif
 
+#ifdef CONFIG_FUSION_MAX_FC_SGE
+#if CONFIG_FUSION_MAX_FC_SGE  < 16
+#define MPT_SCSI_FC_SG_DEPTH	16
+#elif CONFIG_FUSION_MAX_FC_SGE  > 256
+#define MPT_SCSI_FC_SG_DEPTH	256
+#else
+#define MPT_SCSI_FC_SG_DEPTH	CONFIG_FUSION_MAX_FC_SGE
+#endif
+#else
+#define MPT_SCSI_FC_SG_DEPTH	40
+#endif
+
 /* debug print string length used for events and iocstatus */
 # define EVENT_DESCR_STR_SZ             100
 
@@ -431,38 +445,36 @@
  *	IOCTL structure and associated defines
  */
 
-#define MPT_IOCTL_STATUS_DID_IOCRESET	0x01	/* IOC Reset occurred on the current*/
-#define MPT_IOCTL_STATUS_RF_VALID	0x02	/* The Reply Frame is VALID */
-#define MPT_IOCTL_STATUS_TIMER_ACTIVE	0x04	/* The timer is running */
-#define MPT_IOCTL_STATUS_SENSE_VALID	0x08	/* Sense data is valid */
-#define MPT_IOCTL_STATUS_COMMAND_GOOD	0x10	/* Command Status GOOD */
-#define MPT_IOCTL_STATUS_TMTIMER_ACTIVE	0x20	/* The TM timer is running */
-#define MPT_IOCTL_STATUS_TM_FAILED	0x40	/* User TM request failed */
-
 #define MPTCTL_RESET_OK			0x01	/* Issue Bus Reset */
 
-typedef struct _MPT_IOCTL {
-	struct _MPT_ADAPTER	*ioc;
-	u8			 ReplyFrame[MPT_DEFAULT_FRAME_SIZE];	/* reply frame data */
-	u8			 sense[MPT_SENSE_BUFFER_ALLOC];
-	int			 wait_done;	/* wake-up value for this ioc */
-	u8			 rsvd;
-	u8			 status;	/* current command status */
-	u8			 reset;		/* 1 if bus reset allowed */
-	u8			 id;		/* target for reset */
-	struct mutex		 ioctl_mutex;
-} MPT_IOCTL;
+#define MPT_MGMT_STATUS_RF_VALID	0x01	/* The Reply Frame is VALID */
+#define MPT_MGMT_STATUS_COMMAND_GOOD	0x02	/* Command Status GOOD */
+#define MPT_MGMT_STATUS_PENDING		0x04	/* command is pending */
+#define MPT_MGMT_STATUS_DID_IOCRESET	0x08	/* IOC Reset occurred
+						   on the current*/
+#define MPT_MGMT_STATUS_SENSE_VALID	0x10	/* valid sense info */
+#define MPT_MGMT_STATUS_TIMER_ACTIVE	0x20	/* obsolete */
+#define MPT_MGMT_STATUS_FREE_MF		0x40	/* free the mf from
+						   complete routine */
 
-#define MPT_SAS_MGMT_STATUS_RF_VALID	0x02	/* The Reply Frame is VALID */
-#define MPT_SAS_MGMT_STATUS_COMMAND_GOOD	0x10	/* Command Status GOOD */
-#define MPT_SAS_MGMT_STATUS_TM_FAILED	0x40	/* User TM request failed */
+#define INITIALIZE_MGMT_STATUS(status) \
+	status = MPT_MGMT_STATUS_PENDING;
+#define CLEAR_MGMT_STATUS(status) \
+	status = 0;
+#define CLEAR_MGMT_PENDING_STATUS(status) \
+	status &= ~MPT_MGMT_STATUS_PENDING;
+#define SET_MGMT_MSG_CONTEXT(msg_context, value) \
+	msg_context = value;
 
-typedef struct _MPT_SAS_MGMT {
+typedef struct _MPT_MGMT {
 	struct mutex		 mutex;
 	struct completion	 done;
 	u8			 reply[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */
+	u8			 sense[MPT_SENSE_BUFFER_ALLOC];
 	u8			 status;	/* current command status */
-}MPT_SAS_MGMT;
+	int			 completion_code;
+	u32			 msg_context;
+} MPT_MGMT;
 
 /*
  *  Event Structure and define
@@ -564,6 +576,10 @@
 	u8		flags;
 };
 
+typedef void (*MPT_ADD_SGE)(void *pAddr, u32 flagslength, dma_addr_t dma_addr);
+typedef void (*MPT_ADD_CHAIN)(void *pAddr, u8 next, u16 length,
+		dma_addr_t dma_addr);
+
 /*
  *  Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS
  */
@@ -573,6 +589,10 @@
 	int			 pci_irq;	/* This irq           */
 	char			 name[MPT_NAME_LENGTH];	/* "iocN"             */
 	char			 prod_name[MPT_NAME_LENGTH];	/* "LSIFC9x9"         */
+#ifdef CONFIG_FUSION_LOGGING
+	/* used in mpt_display_event_info */
+	char			 evStr[EVENT_DESCR_STR_SZ];
+#endif
 	char			 board_name[16];
 	char			 board_assembly[16];
 	char			 board_tracer[16];
@@ -600,6 +620,10 @@
 	int			 reply_depth;	/* Num Allocated reply frames */
 	int			 reply_sz;	/* Reply frame size */
 	int			 num_chain;	/* Number of chain buffers */
+	MPT_ADD_SGE              add_sge;       /* Pointer to add_sge
+						   function */
+	MPT_ADD_CHAIN		 add_chain;	/* Pointer to add_chain
+						   function */
 		/* Pool of buffers for chaining. ReqToChain
 		 * and ChainToChain track index of chain buffers.
 		 * ChainBuffer (DMA) virt/phys addresses.
@@ -640,11 +664,8 @@
 	RaidCfgData		raid_data;	/* Raid config. data */
 	SasCfgData		sas_data;	/* Sas config. data */
 	FcCfgData		fc_data;	/* Fc config. data */
-	MPT_IOCTL		*ioctl;		/* ioctl data pointer */
 	struct proc_dir_entry	*ioc_dentry;
 	struct _MPT_ADAPTER	*alt_ioc;	/* ptr to 929 bound adapter port */
-	spinlock_t		 diagLock;	/* diagnostic reset lock */
-	int			 diagPending;
 	u32			 biosVersion;	/* BIOS version from IO Unit Page 2 */
 	int			 eventTypes;	/* Event logging parameters */
 	int			 eventContext;	/* Next event context */
@@ -652,7 +673,6 @@
 	struct _mpt_ioctl_events *events;	/* pointer to event log */
 	u8			*cached_fw;	/* Pointer to FW */
 	dma_addr_t	 	cached_fw_dma;
-	struct list_head	 configQ;	/* linked list of config. requests */
 	int			 hs_reply_idx;
 #ifndef MFCNT
 	u32			 pad0;
@@ -665,9 +685,6 @@
 	IOCFactsReply_t		 facts;
 	PortFactsReply_t	 pfacts[2];
 	FCPortPage0_t		 fc_port_page0[2];
-	struct timer_list	 persist_timer;	/* persist table timer */
-	int			 persist_wait_done; /* persist completion flag */
-	u8			 persist_reply_frame[MPT_DEFAULT_FRAME_SIZE]; /* persist reply */
 	LANPage0_t		 lan_cnfg_page0;
 	LANPage1_t		 lan_cnfg_page1;
 
@@ -682,23 +699,44 @@
 	int			 aen_event_read_flag; /* flag to indicate event log was read*/
 	u8			 FirstWhoInit;
 	u8			 upload_fw;	/* If set, do a fw upload */
-	u8			 reload_fw;	/* Force a FW Reload on next reset */
 	u8			 NBShiftFactor;  /* NB Shift Factor based on Block Size (Facts)  */
 	u8			 pad1[4];
 	u8			 DoneCtx;
 	u8			 TaskCtx;
 	u8			 InternalCtx;
-	spinlock_t		 initializing_hba_lock;
-	int 	 		 initializing_hba_lock_flag;
 	struct list_head	 list;
 	struct net_device	*netdev;
 	struct list_head	 sas_topology;
 	struct mutex		 sas_topology_mutex;
+
+	struct workqueue_struct	*fw_event_q;
+	struct list_head	 fw_event_list;
+	spinlock_t		 fw_event_lock;
+	u8			 fw_events_off; /* if '1', then ignore events */
+	char 			 fw_event_q_name[MPT_KOBJ_NAME_LEN];
+
 	struct mutex		 sas_discovery_mutex;
 	u8			 sas_discovery_runtime;
 	u8			 sas_discovery_ignore_events;
+
+	/* port_info object for the host */
+	struct mptsas_portinfo	*hba_port_info;
+	u64			 hba_port_sas_addr;
+	u16			 hba_port_num_phy;
+	struct list_head	 sas_device_info_list;
+	struct mutex		 sas_device_info_mutex;
+	u8			 old_sas_discovery_protocal;
+	u8			 sas_discovery_quiesce_io;
 	int			 sas_index; /* index refrencing */
-	MPT_SAS_MGMT		 sas_mgmt;
+	MPT_MGMT		 sas_mgmt;
+	MPT_MGMT		 mptbase_cmds; /* for sending config pages */
+	MPT_MGMT		 internal_cmds;
+	MPT_MGMT		 taskmgmt_cmds;
+	MPT_MGMT		 ioctl_cmds;
+	spinlock_t		 taskmgmt_lock; /* diagnostic reset lock */
+	int			 taskmgmt_in_progress;
+	u8			 taskmgmt_quiesce_io;
+	u8			 ioc_reset_in_progress;
 	struct work_struct	 sas_persist_task;
 
 	struct work_struct	 fc_setup_reset_work;
@@ -707,15 +745,27 @@
 	u8			 fc_link_speed[2];
 	spinlock_t		 fc_rescan_work_lock;
 	struct work_struct	 fc_rescan_work;
-	char			 fc_rescan_work_q_name[20];
+	char			 fc_rescan_work_q_name[MPT_KOBJ_NAME_LEN];
 	struct workqueue_struct *fc_rescan_work_q;
+
+	/* driver forced bus resets count */
+	unsigned long		  hard_resets;
+	/* fw/external bus resets count */
+	unsigned long		  soft_resets;
+	/* cmd timeouts */
+	unsigned long		  timeouts;
+
 	struct scsi_cmnd	**ScsiLookup;
 	spinlock_t		  scsi_lookup_lock;
-
-	char			 reset_work_q_name[20];
+	u64			dma_mask;
+	u32			  broadcast_aen_busy;
+	char			 reset_work_q_name[MPT_KOBJ_NAME_LEN];
 	struct workqueue_struct *reset_work_q;
 	struct delayed_work	 fault_reset_work;
-	spinlock_t		 fault_reset_work_lock;
+
+	u8			sg_addr_size;
+	u8			in_rescan;
+	u8			SGE_size;
 
 } MPT_ADAPTER;
 
@@ -753,13 +803,14 @@
 	dma_addr_t	Address;
 } MptSge_t;
 
-#define mpt_addr_size() \
-	((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SGE_FLAGS_64_BIT_ADDRESSING : \
-		MPI_SGE_FLAGS_32_BIT_ADDRESSING)
 
-#define mpt_msg_flags() \
-	((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : \
-		MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32)
+#define mpt_msg_flags(ioc) \
+	(ioc->sg_addr_size == sizeof(u64)) ?		\
+	MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : 		\
+	MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32
+
+#define MPT_SGE_FLAGS_64_BIT_ADDRESSING \
+	(MPI_SGE_FLAGS_64_BIT_ADDRESSING << MPI_SGE_FLAGS_SHIFT)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -835,22 +886,14 @@
 		/* Pool of memory for holding SCpnts before doing
 		 * OS callbacks. freeQ is the free pool.
 		 */
-	u8			  tmPending;
-	u8			  resetPending;
 	u8			  negoNvram;		/* DV disabled, nego NVRAM */
 	u8			  pad1;
-	u8                        tmState;
 	u8			  rsvd[2];
 	MPT_FRAME_HDR		 *cmdPtr;		/* Ptr to nonOS request */
 	struct scsi_cmnd	 *abortSCpnt;
 	MPT_LOCAL_REPLY		  localReply;		/* internal cmd reply struct */
-	unsigned long		  hard_resets;		/* driver forced bus resets count */
-	unsigned long		  soft_resets;		/* fw/external bus resets count */
-	unsigned long		  timeouts;		/* cmd timeouts */
 	ushort			  sel_timeout[MPT_MAX_FC_DEVICES];
 	char 			  *info_kbuf;
-	wait_queue_head_t	  scandv_waitq;
-	int			  scandv_wait_done;
 	long			  last_queue_full;
 	u16			  tm_iocstatus;
 	u16			  spi_pending;
@@ -870,21 +913,16 @@
  * Generic structure passed to the base mpt_config function.
  */
 typedef struct _x_config_parms {
-	struct list_head	 linkage;	/* linked list */
-	struct timer_list	 timer;		/* timer function for this request  */
 	union {
 		ConfigExtendedPageHeader_t	*ehdr;
 		ConfigPageHeader_t	*hdr;
 	} cfghdr;
 	dma_addr_t		 physAddr;
-	int			 wait_done;	/* wait for this request */
 	u32			 pageAddr;	/* properly formatted */
+	u16			 status;
 	u8			 action;
 	u8			 dir;
 	u8			 timeout;	/* seconds */
-	u8			 pad1;
-	u16			 status;
-	u16			 pad2;
 } CONFIGPARMS;
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -909,7 +947,6 @@
 extern void	 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
 extern void	 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
 extern void	 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
-extern void	 mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr);
 
 extern int	 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag);
 extern int	 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp);
@@ -922,6 +959,12 @@
 extern int	 mpt_findImVolumes(MPT_ADAPTER *ioc);
 extern int	 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
 extern int	 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk);
+extern int	mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
+		pRaidPhysDiskPage1_t phys_disk);
+extern int	mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc,
+		u8 phys_disk_num);
+extern int	 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc);
+extern void	 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc);
 extern void     mpt_halt_firmware(MPT_ADAPTER *ioc);
 
 
@@ -959,7 +1002,6 @@
 #define MPT_SGE_FLAGS_END_OF_BUFFER		(0x40000000)
 #define MPT_SGE_FLAGS_LOCAL_ADDRESS		(0x08000000)
 #define MPT_SGE_FLAGS_DIRECTION			(0x04000000)
-#define MPT_SGE_FLAGS_ADDRESSING		(mpt_addr_size() << MPI_SGE_FLAGS_SHIFT)
 #define MPT_SGE_FLAGS_END_OF_LIST		(0x01000000)
 
 #define MPT_SGE_FLAGS_TRANSACTION_ELEMENT	(0x00000000)
@@ -972,14 +1014,12 @@
 	 MPT_SGE_FLAGS_END_OF_BUFFER |	\
 	 MPT_SGE_FLAGS_END_OF_LIST |	\
 	 MPT_SGE_FLAGS_SIMPLE_ELEMENT |	\
-	 MPT_SGE_FLAGS_ADDRESSING | \
 	 MPT_TRANSFER_IOC_TO_HOST)
 #define MPT_SGE_FLAGS_SSIMPLE_WRITE \
 	(MPT_SGE_FLAGS_LAST_ELEMENT |	\
 	 MPT_SGE_FLAGS_END_OF_BUFFER |	\
 	 MPT_SGE_FLAGS_END_OF_LIST |	\
 	 MPT_SGE_FLAGS_SIMPLE_ELEMENT |	\
-	 MPT_SGE_FLAGS_ADDRESSING | \
 	 MPT_TRANSFER_HOST_TO_IOC)
 
 /*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index c638171..9b2e219 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -84,6 +84,7 @@
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 
 static u8 mptctl_id = MPT_MAX_PROTOCOL_DRIVERS;
+static u8 mptctl_taskmgmt_id = MPT_MAX_PROTOCOL_DRIVERS;
 
 static DECLARE_WAIT_QUEUE_HEAD ( mptctl_wait );
 
@@ -127,10 +128,7 @@
 		struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc);
 static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma,
 		struct buflist *buflist, MPT_ADAPTER *ioc);
-static void mptctl_timeout_expired (MPT_IOCTL *ioctl);
-static int  mptctl_bus_reset(MPT_IOCTL *ioctl);
-static int mptctl_set_tm_flags(MPT_SCSI_HOST *hd);
-static void mptctl_free_tm_flags(MPT_ADAPTER *ioc);
+static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function);
 
 /*
  * Reset Handler cleanup function
@@ -183,10 +181,10 @@
 	int rc = 0;
 
 	if (nonblock) {
-		if (!mutex_trylock(&ioc->ioctl->ioctl_mutex))
+		if (!mutex_trylock(&ioc->ioctl_cmds.mutex))
 			rc = -EAGAIN;
 	} else {
-		if (mutex_lock_interruptible(&ioc->ioctl->ioctl_mutex))
+		if (mutex_lock_interruptible(&ioc->ioctl_cmds.mutex))
 			rc = -ERESTARTSYS;
 	}
 	return rc;
@@ -202,99 +200,78 @@
 static int
 mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
 {
-	char *sense_data;
-	int sz, req_index;
-	u16 iocStatus;
-	u8 cmd;
+	char	*sense_data;
+	int	req_index;
+	int	sz;
 
-	if (req)
-		 cmd = req->u.hdr.Function;
-	else
-		return 1;
-	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\tcompleting mpi function (0x%02X), req=%p, "
-	    "reply=%p\n", ioc->name,  req->u.hdr.Function, req, reply));
+	if (!req)
+		return 0;
 
-	if (ioc->ioctl) {
+	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "completing mpi function "
+	    "(0x%02X), req=%p, reply=%p\n", ioc->name,  req->u.hdr.Function,
+	    req, reply));
 
-		if (reply==NULL) {
+	/*
+	 * Handling continuation of the same reply. Processing the first
+	 * reply, and eating the other replys that come later.
+	 */
+	if (ioc->ioctl_cmds.msg_context != req->u.hdr.MsgContext)
+		goto out_continuation;
 
-			dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_reply() NULL Reply "
-				"Function=%x!\n", ioc->name, cmd));
+	ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
 
-			ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
-			ioc->ioctl->reset &= ~MPTCTL_RESET_OK;
+	if (!reply)
+		goto out;
 
-			/* We are done, issue wake up
-	 		*/
-			ioc->ioctl->wait_done = 1;
-			wake_up (&mptctl_wait);
-			return 1;
+	ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+	sz = min(ioc->reply_sz, 4*reply->u.reply.MsgLength);
+	memcpy(ioc->ioctl_cmds.reply, reply, sz);
 
-		}
+	if (reply->u.reply.IOCStatus || reply->u.reply.IOCLogInfo)
+		dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "iocstatus (0x%04X), loginfo (0x%08X)\n", ioc->name,
+		    le16_to_cpu(reply->u.reply.IOCStatus),
+		    le32_to_cpu(reply->u.reply.IOCLogInfo)));
 
-		/* Copy the reply frame (which much exist
-		 * for non-SCSI I/O) to the IOC structure.
-		 */
-		memcpy(ioc->ioctl->ReplyFrame, reply,
-			min(ioc->reply_sz, 4*reply->u.reply.MsgLength));
-		ioc->ioctl->status |= MPT_IOCTL_STATUS_RF_VALID;
+	if ((req->u.hdr.Function == MPI_FUNCTION_SCSI_IO_REQUEST) ||
+		(req->u.hdr.Function ==
+		 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
 
-		/* Set the command status to GOOD if IOC Status is GOOD
-		 * OR if SCSI I/O cmd and data underrun or recovered error.
-		 */
-		iocStatus = le16_to_cpu(reply->u.reply.IOCStatus) & MPI_IOCSTATUS_MASK;
-		if (iocStatus  == MPI_IOCSTATUS_SUCCESS)
-			ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
+		if (reply->u.sreply.SCSIStatus || reply->u.sreply.SCSIState)
+			dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"scsi_status (0x%02x), scsi_state (0x%02x), "
+			"tag = (0x%04x), transfer_count (0x%08x)\n", ioc->name,
+			reply->u.sreply.SCSIStatus,
+			reply->u.sreply.SCSIState,
+			le16_to_cpu(reply->u.sreply.TaskTag),
+			le32_to_cpu(reply->u.sreply.TransferCount)));
 
-		if (iocStatus || reply->u.reply.IOCLogInfo)
-			dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\tiocstatus (0x%04X), "
-				"loginfo (0x%08X)\n", ioc->name,
-				iocStatus,
-				le32_to_cpu(reply->u.reply.IOCLogInfo)));
-
-		if ((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
-			(cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
-
-			if (reply->u.sreply.SCSIStatus || reply->u.sreply.SCSIState)
-				dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-					"\tscsi_status (0x%02x), scsi_state (0x%02x), "
-					"tag = (0x%04x), transfer_count (0x%08x)\n", ioc->name,
-					reply->u.sreply.SCSIStatus,
-					reply->u.sreply.SCSIState,
-					le16_to_cpu(reply->u.sreply.TaskTag),
-					le32_to_cpu(reply->u.sreply.TransferCount)));
-
-			ioc->ioctl->reset &= ~MPTCTL_RESET_OK;
-
-			if ((iocStatus == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN) ||
-			(iocStatus == MPI_IOCSTATUS_SCSI_RECOVERED_ERROR)) {
-			ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
-			}
-		}
-
-		/* Copy the sense data - if present
-		 */
-		if ((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) &&
-			(reply->u.sreply.SCSIState &
-			 MPI_SCSI_STATE_AUTOSENSE_VALID)){
+		if (reply->u.sreply.SCSIState &
+			MPI_SCSI_STATE_AUTOSENSE_VALID) {
 			sz = req->u.scsireq.SenseBufferLength;
 			req_index =
 			    le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
-			sense_data =
-			    ((u8 *)ioc->sense_buf_pool +
+			sense_data = ((u8 *)ioc->sense_buf_pool +
 			     (req_index * MPT_SENSE_BUFFER_ALLOC));
-			memcpy(ioc->ioctl->sense, sense_data, sz);
-			ioc->ioctl->status |= MPT_IOCTL_STATUS_SENSE_VALID;
+			memcpy(ioc->ioctl_cmds.sense, sense_data, sz);
+			ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_SENSE_VALID;
 		}
-
-		if (cmd == MPI_FUNCTION_SCSI_TASK_MGMT)
-			mptctl_free_tm_flags(ioc);
-
-		/* We are done, issue wake up
-		 */
-		ioc->ioctl->wait_done = 1;
-		wake_up (&mptctl_wait);
 	}
+
+ out:
+	/* We are done, issue wake up
+	 */
+	if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) {
+		if (req->u.hdr.Function == MPI_FUNCTION_SCSI_TASK_MGMT)
+			mpt_clear_taskmgmt_in_progress_flag(ioc);
+		ioc->ioctl_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+		complete(&ioc->ioctl_cmds.done);
+	}
+
+ out_continuation:
+	if (reply && (reply->u.reply.MsgFlags &
+	    MPI_MSGFLAGS_CONTINUATION_REPLY))
+		return 0;
 	return 1;
 }
 
@@ -304,30 +281,66 @@
  * Expecting an interrupt, however timed out.
  *
  */
-static void mptctl_timeout_expired (MPT_IOCTL *ioctl)
+static void
+mptctl_timeout_expired(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
 {
-	int rc = 1;
+	unsigned long flags;
 
-	if (ioctl == NULL)
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": %s\n",
+		ioc->name, __func__));
+
+	if (mpt_fwfault_debug)
+		mpt_halt_firmware(ioc);
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
+		mpt_free_msg_frame(ioc, mf);
 		return;
-	dctlprintk(ioctl->ioc,
-		   printk(MYIOC_s_DEBUG_FMT ": Timeout Expired! Host %d\n",
-		   ioctl->ioc->name, ioctl->ioc->id));
-
-	ioctl->wait_done = 0;
-	if (ioctl->reset & MPTCTL_RESET_OK)
-		rc = mptctl_bus_reset(ioctl);
-
-	if (rc) {
-		/* Issue a reset for this device.
-		 * The IOC is not responding.
-		 */
-		dctlprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
-			 ioctl->ioc->name));
-		mpt_HardResetHandler(ioctl->ioc, CAN_SLEEP);
 	}
-	return;
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
+
+	if (!mptctl_bus_reset(ioc, mf->u.hdr.Function))
+		return;
+
+	/* Issue a reset for this device.
+	 * The IOC is not responding.
+	 */
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
+		 ioc->name));
+	CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
+	mpt_HardResetHandler(ioc, CAN_SLEEP);
+	mpt_free_msg_frame(ioc, mf);
+}
+
+static int
+mptctl_taskmgmt_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+{
+	if (!mf)
+		return 0;
+
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		"TaskMgmt completed (mf=%p, mr=%p)\n",
+		ioc->name, mf, mr));
+
+	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+
+	if (!mr)
+		goto out;
+
+	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+	memcpy(ioc->taskmgmt_cmds.reply, mr,
+	    min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
+ out:
+	if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+		complete(&ioc->taskmgmt_cmds.done);
+		return 1;
+	}
+	return 0;
 }
 
 /* mptctl_bus_reset
@@ -335,133 +348,150 @@
  * Bus reset code.
  *
  */
-static int mptctl_bus_reset(MPT_IOCTL *ioctl)
+static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function)
 {
 	MPT_FRAME_HDR	*mf;
 	SCSITaskMgmt_t	*pScsiTm;
-	MPT_SCSI_HOST	*hd;
+	SCSITaskMgmtReply_t *pScsiTmReply;
 	int		 ii;
-	int		 retval=0;
+	int		 retval;
+	unsigned long	 timeout;
+	unsigned long	 time_count;
+	u16		 iocstatus;
 
-
-	ioctl->reset &= ~MPTCTL_RESET_OK;
-
-	if (ioctl->ioc->sh == NULL)
+	/* bus reset is only good for SCSI IO, RAID PASSTHRU */
+	if (!(function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) ||
+	    (function == MPI_FUNCTION_SCSI_IO_REQUEST)) {
+		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"TaskMgmt, not SCSI_IO!!\n", ioc->name));
 		return -EPERM;
+	}
 
-	hd = shost_priv(ioctl->ioc->sh);
-	if (hd == NULL)
+	mutex_lock(&ioc->taskmgmt_cmds.mutex);
+	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+		mutex_unlock(&ioc->taskmgmt_cmds.mutex);
 		return -EPERM;
+	}
 
-	/* Single threading ....
-	 */
-	if (mptctl_set_tm_flags(hd) != 0)
-		return -EPERM;
+	retval = 0;
 
 	/* Send request
 	 */
-	if ((mf = mpt_get_msg_frame(mptctl_id, ioctl->ioc)) == NULL) {
-		dtmprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt, no msg frames!!\n",
-				ioctl->ioc->name));
-
-		mptctl_free_tm_flags(ioctl->ioc);
-		return -ENOMEM;
+	mf = mpt_get_msg_frame(mptctl_taskmgmt_id, ioc);
+	if (mf == NULL) {
+		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"TaskMgmt, no msg frames!!\n", ioc->name));
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		retval = -ENOMEM;
+		goto mptctl_bus_reset_done;
 	}
 
-	dtmprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt request @ %p\n",
-			ioctl->ioc->name, mf));
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
+		ioc->name, mf));
 
 	pScsiTm = (SCSITaskMgmt_t *) mf;
-	pScsiTm->TargetID = ioctl->id;
-	pScsiTm->Bus = hd->port;	/* 0 */
-	pScsiTm->ChainOffset = 0;
+	memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t));
 	pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
-	pScsiTm->Reserved = 0;
 	pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS;
-	pScsiTm->Reserved1 = 0;
 	pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION;
-
+	pScsiTm->TargetID = 0;
+	pScsiTm->Bus = 0;
+	pScsiTm->ChainOffset = 0;
+	pScsiTm->Reserved = 0;
+	pScsiTm->Reserved1 = 0;
+	pScsiTm->TaskMsgContext = 0;
 	for (ii= 0; ii < 8; ii++)
 		pScsiTm->LUN[ii] = 0;
-
 	for (ii=0; ii < 7; ii++)
 		pScsiTm->Reserved2[ii] = 0;
 
-	pScsiTm->TaskMsgContext = 0;
-	dtmprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT
-		"mptctl_bus_reset: issued.\n", ioctl->ioc->name));
+	switch (ioc->bus_type) {
+	case FC:
+		timeout = 40;
+		break;
+	case SAS:
+		timeout = 30;
+		break;
+	case SPI:
+	default:
+		timeout = 2;
+		break;
+	}
 
-	DBG_DUMP_TM_REQUEST_FRAME(ioctl->ioc, (u32 *)mf);
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		"TaskMgmt type=%d timeout=%ld\n",
+		ioc->name, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, timeout));
 
-	ioctl->wait_done=0;
-
-	if ((ioctl->ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
-	    (ioctl->ioc->facts.MsgVersion >= MPI_VERSION_01_05))
-		mpt_put_msg_frame_hi_pri(mptctl_id, ioctl->ioc, mf);
+	INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	time_count = jiffies;
+	if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
+	    (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
+		mpt_put_msg_frame_hi_pri(mptctl_taskmgmt_id, ioc, mf);
 	else {
-		retval = mpt_send_handshake_request(mptctl_id, ioctl->ioc,
-			sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
+		retval = mpt_send_handshake_request(mptctl_taskmgmt_id, ioc,
+		    sizeof(SCSITaskMgmt_t), (u32 *)pScsiTm, CAN_SLEEP);
 		if (retval != 0) {
-			dfailprintk(ioctl->ioc, printk(MYIOC_s_ERR_FMT "_send_handshake FAILED!"
-				" (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
-				hd->ioc, mf));
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+				"TaskMgmt send_handshake FAILED!"
+				" (ioc %p, mf %p, rc=%d) \n", ioc->name,
+				ioc, mf, retval));
+			mpt_clear_taskmgmt_in_progress_flag(ioc);
 			goto mptctl_bus_reset_done;
 		}
 	}
 
 	/* Now wait for the command to complete */
-	ii = wait_event_timeout(mptctl_wait,
-	     ioctl->wait_done == 1,
-	     HZ*5 /* 5 second timeout */);
+	ii = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, timeout*HZ);
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "TaskMgmt failed\n", ioc->name));
+		mpt_free_msg_frame(ioc, mf);
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			retval = 0;
+		else
+			retval = -1; /* return failure */
+		goto mptctl_bus_reset_done;
+	}
 
-	if(ii <=0 && (ioctl->wait_done != 1 ))  {
-		mpt_free_msg_frame(hd->ioc, mf);
-		ioctl->wait_done = 0;
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "TaskMgmt failed\n", ioc->name));
+		retval = -1; /* return failure */
+		goto mptctl_bus_reset_done;
+	}
+
+	pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "TaskMgmt fw_channel = %d, fw_id = %d, task_type=0x%02X, "
+	    "iocstatus=0x%04X\n\tloginfo=0x%08X, response_code=0x%02X, "
+	    "term_cmnds=%d\n", ioc->name, pScsiTmReply->Bus,
+	    pScsiTmReply->TargetID, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+	    le16_to_cpu(pScsiTmReply->IOCStatus),
+	    le32_to_cpu(pScsiTmReply->IOCLogInfo),
+	    pScsiTmReply->ResponseCode,
+	    le32_to_cpu(pScsiTmReply->TerminationCount)));
+
+	iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+
+	if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
+	   iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED ||
+	   iocstatus == MPI_IOCSTATUS_SUCCESS)
+		retval = 0;
+	else {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "TaskMgmt failed\n", ioc->name));
 		retval = -1; /* return failure */
 	}
 
-mptctl_bus_reset_done:
 
-	mptctl_free_tm_flags(ioctl->ioc);
+ mptctl_bus_reset_done:
+	mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
 	return retval;
 }
 
-static int
-mptctl_set_tm_flags(MPT_SCSI_HOST *hd) {
-	unsigned long flags;
-
-	spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
-
-	if (hd->tmState == TM_STATE_NONE) {
-		hd->tmState = TM_STATE_IN_PROGRESS;
-		hd->tmPending = 1;
-		spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
-	} else {
-		spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-static void
-mptctl_free_tm_flags(MPT_ADAPTER *ioc)
-{
-	MPT_SCSI_HOST * hd;
-	unsigned long flags;
-
-	hd = shost_priv(ioc->sh);
-	if (hd == NULL)
-		return;
-
-	spin_lock_irqsave(&ioc->FreeQlock, flags);
-
-	hd->tmState = TM_STATE_NONE;
-	hd->tmPending = 0;
-	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-	return;
-}
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /* mptctl_ioc_reset
@@ -473,22 +503,23 @@
 static int
 mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
-	MPT_IOCTL *ioctl = ioc->ioctl;
-	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC %s_reset routed to IOCTL driver!\n", ioc->name,
-		reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
-		reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
-
-	if(ioctl == NULL)
-		return 1;
-
 	switch(reset_phase) {
 	case MPT_IOC_SETUP_RESET:
-		ioctl->status |= MPT_IOCTL_STATUS_DID_IOCRESET;
-		break;
-	case MPT_IOC_POST_RESET:
-		ioctl->status &= ~MPT_IOCTL_STATUS_DID_IOCRESET;
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
 		break;
 	case MPT_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_POST_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+		if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->ioctl_cmds.done);
+		}
+		break;
 	default:
 		break;
 	}
@@ -642,7 +673,7 @@
 	else
 		ret = -EINVAL;
 
-	mutex_unlock(&iocp->ioctl->ioctl_mutex);
+	mutex_unlock(&iocp->ioctl_cmds.mutex);
 
 	return ret;
 }
@@ -758,6 +789,7 @@
 	int			 sge_offset = 0;
 	u16			 iocstat;
 	pFWDownloadReply_t	 ReplyMsg = NULL;
+	unsigned long		 timeleft;
 
 	if (mpt_verify_adapter(ioc, &iocp) < 0) {
 		printk(KERN_DEBUG MYNAM "ioctl_fwdl - ioc%d not found!\n",
@@ -841,8 +873,9 @@
 	 *	96		8
 	 *	64		4
 	 */
-	maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) - sizeof(FWDownloadTCSGE_t))
-			/ (sizeof(dma_addr_t) + sizeof(u32));
+	maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) -
+			sizeof(FWDownloadTCSGE_t))
+			/ iocp->SGE_size;
 	if (numfrags > maxfrags) {
 		ret = -EMLINK;
 		goto fwdl_out;
@@ -870,7 +903,7 @@
 		if (nib == 0 || nib == 3) {
 			;
 		} else if (sgIn->Address) {
-			mpt_add_sge(sgOut, sgIn->FlagsLength, sgIn->Address);
+			iocp->add_sge(sgOut, sgIn->FlagsLength, sgIn->Address);
 			n++;
 			if (copy_from_user(bl->kptr, ufwbuf+fw_bytes_copied, bl->len)) {
 				printk(MYIOC_s_ERR_FMT "%s@%d::_ioctl_fwdl - "
@@ -882,7 +915,7 @@
 		}
 		sgIn++;
 		bl++;
-		sgOut += (sizeof(dma_addr_t) + sizeof(u32));
+		sgOut += iocp->SGE_size;
 	}
 
 	DBG_DUMP_FW_DOWNLOAD(iocp, (u32 *)mf, numfrags);
@@ -891,16 +924,30 @@
 	 * Finally, perform firmware download.
 	 */
 	ReplyMsg = NULL;
+	SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, dlmsg->MsgContext);
+	INITIALIZE_MGMT_STATUS(iocp->ioctl_cmds.status)
 	mpt_put_msg_frame(mptctl_id, iocp, mf);
 
 	/* Now wait for the command to complete */
-	ret = wait_event_timeout(mptctl_wait,
-	     iocp->ioctl->wait_done == 1,
-	     HZ*60);
+retry_wait:
+	timeleft = wait_for_completion_timeout(&iocp->ioctl_cmds.done, HZ*60);
+	if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = -ETIME;
+		printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
+		if (iocp->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+			mpt_free_msg_frame(iocp, mf);
+			goto fwdl_out;
+		}
+		if (!timeleft)
+			mptctl_timeout_expired(iocp, mf);
+		else
+			goto retry_wait;
+		goto fwdl_out;
+	}
 
-	if(ret <=0 && (iocp->ioctl->wait_done != 1 )) {
-	/* Now we need to reset the board */
-		mptctl_timeout_expired(iocp->ioctl);
+	if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
+		mpt_free_msg_frame(iocp, mf);
 		ret = -ENODATA;
 		goto fwdl_out;
 	}
@@ -908,7 +955,7 @@
 	if (sgl)
 		kfree_sgl(sgl, sgl_dma, buflist, iocp);
 
-	ReplyMsg = (pFWDownloadReply_t)iocp->ioctl->ReplyFrame;
+	ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply;
 	iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK;
 	if (iocstat == MPI_IOCSTATUS_SUCCESS) {
 		printk(MYIOC_s_INFO_FMT "F/W update successfull!\n", iocp->name);
@@ -932,6 +979,9 @@
 	return 0;
 
 fwdl_out:
+
+	CLEAR_MGMT_STATUS(iocp->ioctl_cmds.status);
+	SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, 0);
         kfree_sgl(sgl, sgl_dma, buflist, iocp);
 	return ret;
 }
@@ -1003,7 +1053,7 @@
 	 *
 	 */
 	sgl = sglbuf;
-	sg_spill = ((ioc->req_sz - sge_offset)/(sizeof(dma_addr_t) + sizeof(u32))) - 1;
+	sg_spill = ((ioc->req_sz - sge_offset)/ioc->SGE_size) - 1;
 	while (bytes_allocd < bytes) {
 		this_alloc = min(alloc_sz, bytes-bytes_allocd);
 		buflist[buflist_ent].len = this_alloc;
@@ -1024,8 +1074,9 @@
 			dma_addr_t dma_addr;
 
 			bytes_allocd += this_alloc;
-			sgl->FlagsLength = (0x10000000|MPT_SGE_FLAGS_ADDRESSING|sgdir|this_alloc);
-			dma_addr = pci_map_single(ioc->pcidev, buflist[buflist_ent].kptr, this_alloc, dir);
+			sgl->FlagsLength = (0x10000000|sgdir|this_alloc);
+			dma_addr = pci_map_single(ioc->pcidev,
+				buflist[buflist_ent].kptr, this_alloc, dir);
 			sgl->Address = dma_addr;
 
 			fragcnt++;
@@ -1771,7 +1822,10 @@
 	int		msgContext;
 	u16		req_idx;
 	ulong 		timeout;
+	unsigned long	timeleft;
 	struct scsi_device *sdev;
+	unsigned long	 flags;
+	u8		 function;
 
 	/* bufIn and bufOut are used for user to kernel space transfers
 	 */
@@ -1784,24 +1838,23 @@
 				__FILE__, __LINE__, iocnum);
 		return -ENODEV;
 	}
-	if (!ioc->ioctl) {
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 		printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - "
-			"No memory available during driver init.\n",
-				__FILE__, __LINE__);
-		return -ENOMEM;
-	} else if (ioc->ioctl->status & MPT_IOCTL_STATUS_DID_IOCRESET) {
-		printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - "
-			"Busy with IOC Reset \n", __FILE__, __LINE__);
+			"Busy with diagnostic reset\n", __FILE__, __LINE__);
 		return -EBUSY;
 	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
 	/* Verify that the final request frame will not be too large.
 	 */
 	sz = karg.dataSgeOffset * 4;
 	if (karg.dataInSize > 0)
-		sz += sizeof(dma_addr_t) + sizeof(u32);
+		sz += ioc->SGE_size;
 	if (karg.dataOutSize > 0)
-		sz += sizeof(dma_addr_t) + sizeof(u32);
+		sz += ioc->SGE_size;
 
 	if (sz > ioc->req_sz) {
 		printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
@@ -1827,10 +1880,12 @@
 		printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
 			"Unable to read MF from mpt_ioctl_command struct @ %p\n",
 			ioc->name, __FILE__, __LINE__, mfPtr);
+		function = -1;
 		rc = -EFAULT;
 		goto done_free_mem;
 	}
 	hdr->MsgContext = cpu_to_le32(msgContext);
+	function = hdr->Function;
 
 
 	/* Verify that this request is allowed.
@@ -1838,7 +1893,7 @@
 	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sending mpi function (0x%02X), req=%p\n",
 	    ioc->name, hdr->Function, mf));
 
-	switch (hdr->Function) {
+	switch (function) {
 	case MPI_FUNCTION_IOC_FACTS:
 	case MPI_FUNCTION_PORT_FACTS:
 		karg.dataOutSize  = karg.dataInSize = 0;
@@ -1893,7 +1948,7 @@
 			}
 
 			pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
-			pScsiReq->MsgFlags |= mpt_msg_flags();
+			pScsiReq->MsgFlags |= mpt_msg_flags(ioc);
 
 
 			/* verify that app has not requested
@@ -1935,8 +1990,6 @@
 			pScsiReq->Control = cpu_to_le32(scsidir | qtag);
 			pScsiReq->DataLength = cpu_to_le32(dataSize);
 
-			ioc->ioctl->reset = MPTCTL_RESET_OK;
-			ioc->ioctl->id = pScsiReq->TargetID;
 
 		} else {
 			printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
@@ -1979,7 +2032,7 @@
 			int dataSize;
 
 			pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
-			pScsiReq->MsgFlags |= mpt_msg_flags();
+			pScsiReq->MsgFlags |= mpt_msg_flags(ioc);
 
 
 			/* verify that app has not requested
@@ -2014,8 +2067,6 @@
 			pScsiReq->Control = cpu_to_le32(scsidir | qtag);
 			pScsiReq->DataLength = cpu_to_le32(dataSize);
 
-			ioc->ioctl->reset = MPTCTL_RESET_OK;
-			ioc->ioctl->id = pScsiReq->TargetID;
 		} else {
 			printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
 				"SCSI driver is not loaded. \n",
@@ -2026,20 +2077,17 @@
 		break;
 
 	case MPI_FUNCTION_SCSI_TASK_MGMT:
-		{
-			MPT_SCSI_HOST *hd = NULL;
-			if ((ioc->sh == NULL) || ((hd = shost_priv(ioc->sh)) == NULL)) {
-				printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
-					"SCSI driver not loaded or SCSI host not found. \n",
-					ioc->name, __FILE__, __LINE__);
-				rc = -EFAULT;
-				goto done_free_mem;
-			} else if (mptctl_set_tm_flags(hd) != 0) {
-				rc = -EPERM;
-				goto done_free_mem;
-			}
-		}
+	{
+		SCSITaskMgmt_t	*pScsiTm;
+		pScsiTm = (SCSITaskMgmt_t *)mf;
+		dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"\tTaskType=0x%x MsgFlags=0x%x "
+			"TaskMsgContext=0x%x id=%d channel=%d\n",
+			ioc->name, pScsiTm->TaskType, le32_to_cpu
+			(pScsiTm->TaskMsgContext), pScsiTm->MsgFlags,
+			pScsiTm->TargetID, pScsiTm->Bus));
 		break;
+	}
 
 	case MPI_FUNCTION_IOC_INIT:
 		{
@@ -2123,8 +2171,7 @@
 			if (karg.dataInSize > 0) {
 				flagsLength = ( MPI_SGE_FLAGS_SIMPLE_ELEMENT |
 						MPI_SGE_FLAGS_END_OF_BUFFER |
-						MPI_SGE_FLAGS_DIRECTION |
-						mpt_addr_size() )
+						MPI_SGE_FLAGS_DIRECTION)
 						<< MPI_SGE_FLAGS_SHIFT;
 			} else {
 				flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
@@ -2141,8 +2188,8 @@
 				/* Set up this SGE.
 				 * Copy to MF and to sglbuf
 				 */
-				mpt_add_sge(psge, flagsLength, dma_addr_out);
-				psge += (sizeof(u32) + sizeof(dma_addr_t));
+				ioc->add_sge(psge, flagsLength, dma_addr_out);
+				psge += ioc->SGE_size;
 
 				/* Copy user data to kernel space.
 				 */
@@ -2175,18 +2222,25 @@
 				/* Set up this SGE
 				 * Copy to MF and to sglbuf
 				 */
-				mpt_add_sge(psge, flagsLength, dma_addr_in);
+				ioc->add_sge(psge, flagsLength, dma_addr_in);
 			}
 		}
 	} else  {
 		/* Add a NULL SGE
 		 */
-		mpt_add_sge(psge, flagsLength, (dma_addr_t) -1);
+		ioc->add_sge(psge, flagsLength, (dma_addr_t) -1);
 	}
 
-	ioc->ioctl->wait_done = 0;
+	SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, hdr->MsgContext);
+	INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status)
 	if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT) {
 
+		mutex_lock(&ioc->taskmgmt_cmds.mutex);
+		if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+			mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+			goto done_free_mem;
+		}
+
 		DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf);
 
 		if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
@@ -2197,10 +2251,11 @@
 				sizeof(SCSITaskMgmt_t), (u32*)mf, CAN_SLEEP);
 			if (rc != 0) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				    "_send_handshake FAILED! (ioc %p, mf %p)\n",
+				    "send_handshake FAILED! (ioc %p, mf %p)\n",
 				    ioc->name, ioc, mf));
-				mptctl_free_tm_flags(ioc);
+				mpt_clear_taskmgmt_in_progress_flag(ioc);
 				rc = -ENODATA;
+				mutex_unlock(&ioc->taskmgmt_cmds.mutex);
 				goto done_free_mem;
 			}
 		}
@@ -2210,36 +2265,47 @@
 
 	/* Now wait for the command to complete */
 	timeout = (karg.timeout > 0) ? karg.timeout : MPT_IOCTL_DEFAULT_TIMEOUT;
-	timeout = wait_event_timeout(mptctl_wait,
-	     ioc->ioctl->wait_done == 1,
-	     HZ*timeout);
-
-	if(timeout <=0 && (ioc->ioctl->wait_done != 1 )) {
-	/* Now we need to reset the board */
-
-		if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT)
-			mptctl_free_tm_flags(ioc);
-
-		mptctl_timeout_expired(ioc->ioctl);
-		rc = -ENODATA;
+retry_wait:
+	timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done,
+				HZ*timeout);
+	if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		rc = -ETIME;
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "%s: TIMED OUT!\n",
+		    ioc->name, __func__));
+		if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+			if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
+				mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+			goto done_free_mem;
+		}
+		if (!timeleft) {
+			if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
+				mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+			mptctl_timeout_expired(ioc, mf);
+			mf = NULL;
+		} else
+			goto retry_wait;
 		goto done_free_mem;
 	}
 
+	if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
+		mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+
+
 	mf = NULL;
 
 	/* If a valid reply frame, copy to the user.
 	 * Offset 2: reply length in U32's
 	 */
-	if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID) {
+	if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID) {
 		if (karg.maxReplyBytes < ioc->reply_sz) {
-			 sz = min(karg.maxReplyBytes, 4*ioc->ioctl->ReplyFrame[2]);
+			sz = min(karg.maxReplyBytes,
+				4*ioc->ioctl_cmds.reply[2]);
 		} else {
-			 sz = min(ioc->reply_sz, 4*ioc->ioctl->ReplyFrame[2]);
+			 sz = min(ioc->reply_sz, 4*ioc->ioctl_cmds.reply[2]);
 		}
-
 		if (sz > 0) {
 			if (copy_to_user(karg.replyFrameBufPtr,
-				 &ioc->ioctl->ReplyFrame, sz)){
+				 ioc->ioctl_cmds.reply, sz)){
 				 printk(MYIOC_s_ERR_FMT
 				     "%s@%d::mptctl_do_mpt_command - "
 				 "Unable to write out reply frame %p\n",
@@ -2252,10 +2318,11 @@
 
 	/* If valid sense data, copy to user.
 	 */
-	if (ioc->ioctl->status & MPT_IOCTL_STATUS_SENSE_VALID) {
+	if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_SENSE_VALID) {
 		sz = min(karg.maxSenseBytes, MPT_SENSE_BUFFER_SIZE);
 		if (sz > 0) {
-			if (copy_to_user(karg.senseDataPtr, ioc->ioctl->sense, sz)) {
+			if (copy_to_user(karg.senseDataPtr,
+				ioc->ioctl_cmds.sense, sz)) {
 				printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
 				"Unable to write sense data to user %p\n",
 				ioc->name, __FILE__, __LINE__,
@@ -2269,7 +2336,7 @@
 	/* If the overall status is _GOOD and data in, copy data
 	 * to user.
 	 */
-	if ((ioc->ioctl->status & MPT_IOCTL_STATUS_COMMAND_GOOD) &&
+	if ((ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD) &&
 				(karg.dataInSize > 0) && (bufIn.kptr)) {
 
 		if (copy_to_user(karg.dataInBufPtr,
@@ -2284,9 +2351,8 @@
 
 done_free_mem:
 
-	ioc->ioctl->status &= ~(MPT_IOCTL_STATUS_COMMAND_GOOD |
-		MPT_IOCTL_STATUS_SENSE_VALID |
-		MPT_IOCTL_STATUS_RF_VALID );
+	CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status)
+	SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0);
 
 	/* Free the allocated memory.
 	 */
@@ -2336,6 +2402,8 @@
 	ToolboxIstwiReadWriteRequest_t	*IstwiRWRequest;
 	MPT_FRAME_HDR		*mf = NULL;
 	MPIHeader_t		*mpi_hdr;
+	unsigned long		timeleft;
+	int			retval;
 
 	/* Reset long to int. Should affect IA64 and SPARC only
 	 */
@@ -2466,9 +2534,9 @@
 		MPT_SCSI_HOST *hd =  shost_priv(ioc->sh);
 
 		if (hd && (cim_rev == 1)) {
-			karg.hard_resets = hd->hard_resets;
-			karg.soft_resets = hd->soft_resets;
-			karg.timeouts = hd->timeouts;
+			karg.hard_resets = ioc->hard_resets;
+			karg.soft_resets = ioc->soft_resets;
+			karg.timeouts = ioc->timeouts;
 		}
 	}
 
@@ -2476,8 +2544,8 @@
 	 * Gather ISTWI(Industry Standard Two Wire Interface) Data
 	 */
 	if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
-		    ioc->name,__func__));
+		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"%s, no msg frames!!\n", ioc->name, __func__));
 		goto out;
 	}
 
@@ -2498,22 +2566,29 @@
 	pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma);
 	if (!pbuf)
 		goto out;
-	mpt_add_sge((char *)&IstwiRWRequest->SGL,
+	ioc->add_sge((char *)&IstwiRWRequest->SGL,
 	    (MPT_SGE_FLAGS_SSIMPLE_READ|4), buf_dma);
 
-	ioc->ioctl->wait_done = 0;
+	retval = 0;
+	SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context,
+				IstwiRWRequest->MsgContext);
+	INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status)
 	mpt_put_msg_frame(mptctl_id, ioc, mf);
 
-	rc = wait_event_timeout(mptctl_wait,
-	     ioc->ioctl->wait_done == 1,
-	     HZ*MPT_IOCTL_DEFAULT_TIMEOUT /* 10 sec */);
-
-	if(rc <=0 && (ioc->ioctl->wait_done != 1 )) {
-		/*
-		 * Now we need to reset the board
-		 */
-		mpt_free_msg_frame(ioc, mf);
-		mptctl_timeout_expired(ioc->ioctl);
+retry_wait:
+	timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done,
+			HZ*MPT_IOCTL_DEFAULT_TIMEOUT);
+	if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		retval = -ETIME;
+		printk(MYIOC_s_WARN_FMT "%s: failed\n", ioc->name, __func__);
+		if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+			mpt_free_msg_frame(ioc, mf);
+			goto out;
+		}
+		if (!timeleft)
+			mptctl_timeout_expired(ioc, mf);
+		else
+			goto retry_wait;
 		goto out;
 	}
 
@@ -2526,10 +2601,13 @@
 	 *   bays have drives in them
 	 * pbuf[3] = Checksum (0x100 = (byte0 + byte2 + byte3)
 	 */
-	if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID)
+	if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)
 		karg.rsvd = *(u32 *)pbuf;
 
  out:
+	CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status)
+	SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0);
+
 	if (pbuf)
 		pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
 
@@ -2753,7 +2831,7 @@
 
 	ret = mptctl_do_fw_download(kfw.iocnum, kfw.bufp, kfw.fwlen);
 
-	mutex_unlock(&iocp->ioctl->ioctl_mutex);
+	mutex_unlock(&iocp->ioctl_cmds.mutex);
 
 	return ret;
 }
@@ -2807,7 +2885,7 @@
 	 */
 	ret = mptctl_do_mpt_command (karg, &uarg->MF);
 
-	mutex_unlock(&iocp->ioctl->ioctl_mutex);
+	mutex_unlock(&iocp->ioctl_cmds.mutex);
 
 	return ret;
 }
@@ -2859,21 +2937,10 @@
 static int
 mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	MPT_IOCTL *mem;
 	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 
-	/*
-	 * Allocate and inite a MPT_IOCTL structure
-	*/
-	mem = kzalloc(sizeof(MPT_IOCTL), GFP_KERNEL);
-	if (!mem) {
-		mptctl_remove(pdev);
-		return -ENOMEM;
-	}
-
-	ioc->ioctl = mem;
-	ioc->ioctl->ioc = ioc;
-	mutex_init(&ioc->ioctl->ioctl_mutex);
+	mutex_init(&ioc->ioctl_cmds.mutex);
+	init_completion(&ioc->ioctl_cmds.done);
 	return 0;
 }
 
@@ -2887,9 +2954,6 @@
 static void
 mptctl_remove(struct pci_dev *pdev)
 {
-	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
-
-	kfree ( ioc->ioctl );
 }
 
 static struct mpt_pci_driver mptctl_driver = {
@@ -2929,6 +2993,7 @@
 		goto out_fail;
 	}
 
+	mptctl_taskmgmt_id = mpt_register(mptctl_taskmgmt_reply, MPTCTL_DRIVER);
 	mpt_reset_register(mptctl_id, mptctl_ioc_reset);
 	mpt_event_register(mptctl_id, mptctl_event_process);
 
@@ -2953,6 +3018,7 @@
 
 	/* De-register callback handler from base module */
 	mpt_deregister(mptctl_id);
+	mpt_reset_deregister(mptctl_taskmgmt_id);
 
         mpt_device_driver_deregister(MPTCTL_DRIVER);
 
diff --git a/drivers/message/fusion/mptdebug.h b/drivers/message/fusion/mptdebug.h
index 510b9f4..28e4788 100644
--- a/drivers/message/fusion/mptdebug.h
+++ b/drivers/message/fusion/mptdebug.h
@@ -58,6 +58,7 @@
 #define MPT_DEBUG_FC			0x00080000
 #define MPT_DEBUG_SAS			0x00100000
 #define MPT_DEBUG_SAS_WIDE		0x00200000
+#define MPT_DEBUG_36GB_MEM              0x00400000
 
 /*
  * CONFIG_FUSION_LOGGING - enabled in Kconfig
@@ -135,6 +136,8 @@
 #define dsaswideprintk(IOC, CMD)		\
 	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE)
 
+#define d36memprintk(IOC, CMD)		\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_36GB_MEM)
 
 
 /*
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index c3c24fdf..e61df13 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -1251,17 +1251,15 @@
 	 * A slightly different algorithm is required for
 	 * 64bit SGEs.
 	 */
-	scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	scale = ioc->req_sz/ioc->SGE_size;
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		numSGE = (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 60) / ioc->SGE_size;
 	} else {
 		numSGE = 1 + (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 64) / ioc->SGE_size;
 	}
 
 	if (numSGE < sh->sg_tablesize) {
@@ -1292,9 +1290,6 @@
 
 	/* Clear the TM flags
 	 */
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	hd->resetPending = 0;
 	hd->abortSCpnt = NULL;
 
 	/* Clear the pointer used to store
@@ -1312,8 +1307,6 @@
 	hd->timer.data = (unsigned long) hd;
 	hd->timer.function = mptscsih_timer_expired;
 
-	init_waitqueue_head(&hd->scandv_waitq);
-	hd->scandv_wait_done = 0;
 	hd->last_queue_full = 0;
 
 	sh->transportt = mptfc_transport_template;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 79f5433..20e0b44 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -93,8 +93,37 @@
 static u8	mptsasTaskCtx = MPT_MAX_PROTOCOL_DRIVERS;
 static u8	mptsasInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */
 static u8	mptsasMgmtCtx = MPT_MAX_PROTOCOL_DRIVERS;
+static u8	mptsasDeviceResetCtx = MPT_MAX_PROTOCOL_DRIVERS;
 
-static void mptsas_hotplug_work(struct work_struct *work);
+static void mptsas_firmware_event_work(struct work_struct *work);
+static void mptsas_send_sas_event(struct fw_event_work *fw_event);
+static void mptsas_send_raid_event(struct fw_event_work *fw_event);
+static void mptsas_send_ir2_event(struct fw_event_work *fw_event);
+static void mptsas_parse_device_info(struct sas_identify *identify,
+		struct mptsas_devinfo *device_info);
+static inline void mptsas_set_rphy(MPT_ADAPTER *ioc,
+		struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy);
+static struct mptsas_phyinfo	*mptsas_find_phyinfo_by_sas_address
+		(MPT_ADAPTER *ioc, u64 sas_address);
+static int mptsas_sas_device_pg0(MPT_ADAPTER *ioc,
+	struct mptsas_devinfo *device_info, u32 form, u32 form_specific);
+static int mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc,
+	struct mptsas_enclosure *enclosure, u32 form, u32 form_specific);
+static int mptsas_add_end_device(MPT_ADAPTER *ioc,
+	struct mptsas_phyinfo *phy_info);
+static void mptsas_del_end_device(MPT_ADAPTER *ioc,
+	struct mptsas_phyinfo *phy_info);
+static void mptsas_send_link_status_event(struct fw_event_work *fw_event);
+static struct mptsas_portinfo	*mptsas_find_portinfo_by_sas_address
+		(MPT_ADAPTER *ioc, u64 sas_address);
+static void mptsas_expander_delete(MPT_ADAPTER *ioc,
+		struct mptsas_portinfo *port_info, u8 force);
+static void mptsas_send_expander_event(struct fw_event_work *fw_event);
+static void mptsas_not_responding_devices(MPT_ADAPTER *ioc);
+static void mptsas_scan_sas_topology(MPT_ADAPTER *ioc);
+static void mptsas_broadcast_primative_work(struct fw_event_work *fw_event);
+static void mptsas_handle_queue_full_event(struct fw_event_work *fw_event);
+static void mptsas_volume_delete(MPT_ADAPTER *ioc, u8 id);
 
 static void mptsas_print_phy_data(MPT_ADAPTER *ioc,
 					MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
@@ -218,6 +247,115 @@
 	    le16_to_cpu(pg1->AttachedDevHandle)));
 }
 
+/* inhibit sas firmware event handling */
+static void
+mptsas_fw_event_off(MPT_ADAPTER *ioc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	ioc->fw_events_off = 1;
+	ioc->sas_discovery_quiesce_io = 0;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+
+}
+
+/* enable sas firmware event handling */
+static void
+mptsas_fw_event_on(MPT_ADAPTER *ioc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	ioc->fw_events_off = 0;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* queue a sas firmware event */
+static void
+mptsas_add_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+    unsigned long delay)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	list_add_tail(&fw_event->list, &ioc->fw_event_list);
+	INIT_DELAYED_WORK(&fw_event->work, mptsas_firmware_event_work);
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: add (fw_event=0x%p)\n",
+	    ioc->name, __func__, fw_event));
+	queue_delayed_work(ioc->fw_event_q, &fw_event->work,
+	    delay);
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* requeue a sas firmware event */
+static void
+mptsas_requeue_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+    unsigned long delay)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: reschedule task "
+	    "(fw_event=0x%p)\n", ioc->name, __func__, fw_event));
+	fw_event->retries++;
+	queue_delayed_work(ioc->fw_event_q, &fw_event->work,
+	    msecs_to_jiffies(delay));
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* free memory assoicated to a sas firmware event */
+static void
+mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: kfree (fw_event=0x%p)\n",
+	    ioc->name, __func__, fw_event));
+	list_del(&fw_event->list);
+	kfree(fw_event);
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* walk the firmware event queue, and either stop or wait for
+ * outstanding events to complete */
+static void
+mptsas_cleanup_fw_event_q(MPT_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event, *next;
+	struct mptsas_target_reset_event *target_reset_list, *n;
+	u8	flush_q;
+	MPT_SCSI_HOST	*hd = shost_priv(ioc->sh);
+
+	/* flush the target_reset_list */
+	if (!list_empty(&hd->target_reset_list)) {
+		list_for_each_entry_safe(target_reset_list, n,
+		    &hd->target_reset_list, list) {
+			dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			    "%s: removing target reset for id=%d\n",
+			    ioc->name, __func__,
+			   target_reset_list->sas_event_data.TargetID));
+			list_del(&target_reset_list->list);
+			kfree(target_reset_list);
+		}
+	}
+
+	if (list_empty(&ioc->fw_event_list) ||
+	     !ioc->fw_event_q || in_interrupt())
+		return;
+
+	flush_q = 0;
+	list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) {
+		if (cancel_delayed_work(&fw_event->work))
+			mptsas_free_fw_event(ioc, fw_event);
+		else
+			flush_q = 1;
+	}
+	if (flush_q)
+		flush_workqueue(ioc->fw_event_q);
+}
+
+
 static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
 {
 	struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
@@ -230,20 +368,6 @@
 	return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
 }
 
-static struct mptsas_portinfo *
-mptsas_get_hba_portinfo(MPT_ADAPTER *ioc)
-{
-	struct list_head	*head = &ioc->sas_topology;
-	struct mptsas_portinfo	*pi = NULL;
-
-	/* always the first entry on sas_topology list */
-
-	if (!list_empty(head))
-		pi = list_entry(head->next, struct mptsas_portinfo, list);
-
-	return pi;
-}
-
 /*
  * mptsas_find_portinfo_by_handle
  *
@@ -265,6 +389,38 @@
 	return rc;
 }
 
+/**
+ *	mptsas_find_portinfo_by_sas_address -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@handle:
+ *
+ *	This function should be called with the sas_topology_mutex already held
+ *
+ **/
+static struct mptsas_portinfo *
+mptsas_find_portinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
+{
+	struct mptsas_portinfo *port_info, *rc = NULL;
+	int i;
+
+	if (sas_address >= ioc->hba_port_sas_addr &&
+	    sas_address < (ioc->hba_port_sas_addr +
+	    ioc->hba_port_num_phy))
+		return ioc->hba_port_info;
+
+	mutex_lock(&ioc->sas_topology_mutex);
+	list_for_each_entry(port_info, &ioc->sas_topology, list)
+		for (i = 0; i < port_info->num_phys; i++)
+			if (port_info->phy_info[i].identify.sas_address ==
+			    sas_address) {
+				rc = port_info;
+				goto out;
+			}
+ out:
+	mutex_unlock(&ioc->sas_topology_mutex);
+	return rc;
+}
+
 /*
  * Returns true if there is a scsi end device
  */
@@ -308,6 +464,7 @@
 		if(phy_info->port_details != port_details)
 			continue;
 		memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
+		mptsas_set_rphy(ioc, phy_info, NULL);
 		phy_info->port_details = NULL;
 	}
 	kfree(port_details);
@@ -379,6 +536,285 @@
 		phy_info->port_details->starget = starget;
 }
 
+/**
+ *	mptsas_add_device_component -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@channel: fw mapped id's
+ *	@id:
+ *	@sas_address:
+ *	@device_info:
+ *
+ **/
+static void
+mptsas_add_device_component(MPT_ADAPTER *ioc, u8 channel, u8 id,
+	u64 sas_address, u32 device_info, u16 slot, u64 enclosure_logical_id)
+{
+	struct mptsas_device_info	*sas_info, *next;
+	struct scsi_device	*sdev;
+	struct scsi_target	*starget;
+	struct sas_rphy	*rphy;
+
+	/*
+	 * Delete all matching devices out of the list
+	 */
+	mutex_lock(&ioc->sas_device_info_mutex);
+	list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+	    list) {
+		if (!sas_info->is_logical_volume &&
+		    (sas_info->sas_address == sas_address ||
+		    (sas_info->fw.channel == channel &&
+		     sas_info->fw.id == id))) {
+			list_del(&sas_info->list);
+			kfree(sas_info);
+		}
+	}
+
+	sas_info = kzalloc(sizeof(struct mptsas_device_info), GFP_KERNEL);
+	if (!sas_info)
+		goto out;
+
+	/*
+	 * Set Firmware mapping
+	 */
+	sas_info->fw.id = id;
+	sas_info->fw.channel = channel;
+
+	sas_info->sas_address = sas_address;
+	sas_info->device_info = device_info;
+	sas_info->slot = slot;
+	sas_info->enclosure_logical_id = enclosure_logical_id;
+	INIT_LIST_HEAD(&sas_info->list);
+	list_add_tail(&sas_info->list, &ioc->sas_device_info_list);
+
+	/*
+	 * Set OS mapping
+	 */
+	shost_for_each_device(sdev, ioc->sh) {
+		starget = scsi_target(sdev);
+		rphy = dev_to_rphy(starget->dev.parent);
+		if (rphy->identify.sas_address == sas_address) {
+			sas_info->os.id = starget->id;
+			sas_info->os.channel = starget->channel;
+		}
+	}
+
+ out:
+	mutex_unlock(&ioc->sas_device_info_mutex);
+	return;
+}
+
+/**
+ *	mptsas_add_device_component_by_fw -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@channel:  fw mapped id's
+ *	@id:
+ *
+ **/
+static void
+mptsas_add_device_component_by_fw(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+	struct mptsas_devinfo sas_device;
+	struct mptsas_enclosure enclosure_info;
+	int rc;
+
+	rc = mptsas_sas_device_pg0(ioc, &sas_device,
+	    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+	     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+	    (channel << 8) + id);
+	if (rc)
+		return;
+
+	memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
+	mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
+	    (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
+	     MPI_SAS_ENCLOS_PGAD_FORM_SHIFT),
+	     sas_device.handle_enclosure);
+
+	mptsas_add_device_component(ioc, sas_device.channel,
+	    sas_device.id, sas_device.sas_address, sas_device.device_info,
+	    sas_device.slot, enclosure_info.enclosure_logical_id);
+}
+
+/**
+ *	mptsas_add_device_component_starget_ir - Handle Integrated RAID, adding each individual device to list
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@channel: fw mapped id's
+ *	@id:
+ *
+ **/
+static void
+mptsas_add_device_component_starget_ir(MPT_ADAPTER *ioc,
+		struct scsi_target *starget)
+{
+	CONFIGPARMS			cfg;
+	ConfigPageHeader_t		hdr;
+	dma_addr_t			dma_handle;
+	pRaidVolumePage0_t		buffer = NULL;
+	int				i;
+	RaidPhysDiskPage0_t 		phys_disk;
+	struct mptsas_device_info	*sas_info, *next;
+
+	memset(&cfg, 0 , sizeof(CONFIGPARMS));
+	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+	hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
+	/* assumption that all volumes on channel = 0 */
+	cfg.pageAddr = starget->id;
+	cfg.cfghdr.hdr = &hdr;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+	cfg.timeout = 10;
+
+	if (mpt_config(ioc, &cfg) != 0)
+		goto out;
+
+	if (!hdr.PageLength)
+		goto out;
+
+	buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+	    &dma_handle);
+
+	if (!buffer)
+		goto out;
+
+	cfg.physAddr = dma_handle;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+	if (mpt_config(ioc, &cfg) != 0)
+		goto out;
+
+	if (!buffer->NumPhysDisks)
+		goto out;
+
+	/*
+	 * Adding entry for hidden components
+	 */
+	for (i = 0; i < buffer->NumPhysDisks; i++) {
+
+		if (mpt_raid_phys_disk_pg0(ioc,
+		    buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
+			continue;
+
+		mptsas_add_device_component_by_fw(ioc, phys_disk.PhysDiskBus,
+		    phys_disk.PhysDiskID);
+
+		mutex_lock(&ioc->sas_device_info_mutex);
+		list_for_each_entry(sas_info, &ioc->sas_device_info_list,
+		    list) {
+			if (!sas_info->is_logical_volume &&
+			    (sas_info->fw.channel == phys_disk.PhysDiskBus &&
+			    sas_info->fw.id == phys_disk.PhysDiskID)) {
+				sas_info->is_hidden_raid_component = 1;
+				sas_info->volume_id = starget->id;
+			}
+		}
+		mutex_unlock(&ioc->sas_device_info_mutex);
+
+	}
+
+	/*
+	 * Delete all matching devices out of the list
+	 */
+	mutex_lock(&ioc->sas_device_info_mutex);
+	list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+	    list) {
+		if (sas_info->is_logical_volume && sas_info->fw.id ==
+		    starget->id) {
+			list_del(&sas_info->list);
+			kfree(sas_info);
+		}
+	}
+
+	sas_info = kzalloc(sizeof(struct mptsas_device_info), GFP_KERNEL);
+	if (sas_info) {
+		sas_info->fw.id = starget->id;
+		sas_info->os.id = starget->id;
+		sas_info->os.channel = starget->channel;
+		sas_info->is_logical_volume = 1;
+		INIT_LIST_HEAD(&sas_info->list);
+		list_add_tail(&sas_info->list, &ioc->sas_device_info_list);
+	}
+	mutex_unlock(&ioc->sas_device_info_mutex);
+
+ out:
+	if (buffer)
+		pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+		    dma_handle);
+}
+
+/**
+ *	mptsas_add_device_component_starget -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@starget:
+ *
+ **/
+static void
+mptsas_add_device_component_starget(MPT_ADAPTER *ioc,
+	struct scsi_target *starget)
+{
+	VirtTarget	*vtarget;
+	struct sas_rphy	*rphy;
+	struct mptsas_phyinfo	*phy_info = NULL;
+	struct mptsas_enclosure	enclosure_info;
+
+	rphy = dev_to_rphy(starget->dev.parent);
+	vtarget = starget->hostdata;
+	phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+			rphy->identify.sas_address);
+	if (!phy_info)
+		return;
+
+	memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
+	mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
+		(MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
+		MPI_SAS_ENCLOS_PGAD_FORM_SHIFT),
+		phy_info->attached.handle_enclosure);
+
+	mptsas_add_device_component(ioc, phy_info->attached.channel,
+		phy_info->attached.id, phy_info->attached.sas_address,
+		phy_info->attached.device_info,
+		phy_info->attached.slot, enclosure_info.enclosure_logical_id);
+}
+
+/**
+ *	mptsas_del_device_component_by_os - Once a device has been removed, we mark the entry in the list as being cached
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@channel: os mapped id's
+ *	@id:
+ *
+ **/
+static void
+mptsas_del_device_component_by_os(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+	struct mptsas_device_info	*sas_info, *next;
+
+	/*
+	 * Set is_cached flag
+	 */
+	list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+		list) {
+		if (sas_info->os.channel == channel && sas_info->os.id == id)
+			sas_info->is_cached = 1;
+	}
+}
+
+/**
+ *	mptsas_del_device_components - Cleaning the list
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+static void
+mptsas_del_device_components(MPT_ADAPTER *ioc)
+{
+	struct mptsas_device_info	*sas_info, *next;
+
+	mutex_lock(&ioc->sas_device_info_mutex);
+	list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+		list) {
+		list_del(&sas_info->list);
+		kfree(sas_info);
+	}
+	mutex_unlock(&ioc->sas_device_info_mutex);
+}
+
 
 /*
  * mptsas_setup_wide_ports
@@ -434,8 +870,8 @@
 		 * Forming a port
 		 */
 		if (!port_details) {
-			port_details = kzalloc(sizeof(*port_details),
-				GFP_KERNEL);
+			port_details = kzalloc(sizeof(struct
+				mptsas_portinfo_details), GFP_KERNEL);
 			if (!port_details)
 				goto out;
 			port_details->num_phys = 1;
@@ -523,15 +959,62 @@
 	VirtTarget 			*vtarget = NULL;
 
 	shost_for_each_device(sdev, ioc->sh) {
-		if ((vdevice = sdev->hostdata) == NULL)
+		vdevice = sdev->hostdata;
+		if ((vdevice == NULL) ||
+			(vdevice->vtarget == NULL))
+			continue;
+		if ((vdevice->vtarget->tflags &
+		    MPT_TARGET_FLAGS_RAID_COMPONENT ||
+		    vdevice->vtarget->raidVolume))
 			continue;
 		if (vdevice->vtarget->id == id &&
-		    vdevice->vtarget->channel == channel)
+			vdevice->vtarget->channel == channel)
 			vtarget = vdevice->vtarget;
 	}
 	return vtarget;
 }
 
+static void
+mptsas_queue_device_delete(MPT_ADAPTER *ioc,
+	MpiEventDataSasDeviceStatusChange_t *sas_event_data)
+{
+	struct fw_event_work *fw_event;
+	int sz;
+
+	sz = offsetof(struct fw_event_work, event_data) +
+	    sizeof(MpiEventDataSasDeviceStatusChange_t);
+	fw_event = kzalloc(sz, GFP_ATOMIC);
+	if (!fw_event) {
+		printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n",
+		    ioc->name, __func__, __LINE__);
+		return;
+	}
+	memcpy(fw_event->event_data, sas_event_data,
+	    sizeof(MpiEventDataSasDeviceStatusChange_t));
+	fw_event->event = MPI_EVENT_SAS_DEVICE_STATUS_CHANGE;
+	fw_event->ioc = ioc;
+	mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1));
+}
+
+static void
+mptsas_queue_rescan(MPT_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event;
+	int sz;
+
+	sz = offsetof(struct fw_event_work, event_data);
+	fw_event = kzalloc(sz, GFP_ATOMIC);
+	if (!fw_event) {
+		printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n",
+		    ioc->name, __func__, __LINE__);
+		return;
+	}
+	fw_event->event = -1;
+	fw_event->ioc = ioc;
+	mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1));
+}
+
+
 /**
  * mptsas_target_reset
  *
@@ -550,13 +1033,21 @@
 {
 	MPT_FRAME_HDR	*mf;
 	SCSITaskMgmt_t	*pScsiTm;
-
-	if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames @%d!!\n",
-		    ioc->name,__func__, __LINE__));
+	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0)
 		return 0;
+
+
+	mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc);
+	if (mf == NULL) {
+		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"%s, no msg frames @%d!!\n", ioc->name,
+			__func__, __LINE__));
+		goto out_fail;
 	}
 
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
+		ioc->name, mf));
+
 	/* Format the Request
 	 */
 	pScsiTm = (SCSITaskMgmt_t *) mf;
@@ -569,9 +1060,18 @@
 
 	DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf);
 
-	mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	   "TaskMgmt type=%d (sas device delete) fw_channel = %d fw_id = %d)\n",
+	   ioc->name, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, channel, id));
+
+	mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf);
 
 	return 1;
+
+ out_fail:
+
+	mpt_clear_taskmgmt_in_progress_flag(ioc);
+	return 0;
 }
 
 /**
@@ -602,11 +1102,12 @@
 
 	vtarget->deleted = 1; /* block IO */
 
-	target_reset_list = kzalloc(sizeof(*target_reset_list),
+	target_reset_list = kzalloc(sizeof(struct mptsas_target_reset_event),
 	    GFP_ATOMIC);
 	if (!target_reset_list) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
-		    ioc->name,__func__, __LINE__));
+		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"%s, failed to allocate mem @%d..!!\n",
+			ioc->name, __func__, __LINE__));
 		return;
 	}
 
@@ -614,84 +1115,101 @@
 		sizeof(*sas_event_data));
 	list_add_tail(&target_reset_list->list, &hd->target_reset_list);
 
-	if (hd->resetPending)
-		return;
+	target_reset_list->time_count = jiffies;
 
 	if (mptsas_target_reset(ioc, channel, id)) {
 		target_reset_list->target_reset_issued = 1;
-		hd->resetPending = 1;
 	}
 }
 
 /**
- * mptsas_dev_reset_complete
+ *	mptsas_taskmgmt_complete - complete SAS task management function
+ *	@ioc: Pointer to MPT_ADAPTER structure
  *
- * Completion for TARGET_RESET after NOT_RESPONDING_EVENT,
- * enable work queue to finish off removing device from upper layers.
- * then send next TARGET_RESET in the queue.
- *
- * @ioc
- *
+ *	Completion for TARGET_RESET after NOT_RESPONDING_EVENT, enable work
+ *	queue to finish off removing device from upper layers. then send next
+ *	TARGET_RESET in the queue.
  **/
-static void
-mptsas_dev_reset_complete(MPT_ADAPTER *ioc)
+static int
+mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 {
 	MPT_SCSI_HOST	*hd = shost_priv(ioc->sh);
         struct list_head *head = &hd->target_reset_list;
-	struct mptsas_target_reset_event *target_reset_list;
-	struct mptsas_hotplug_event *ev;
-	EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
 	u8		id, channel;
-	__le64		sas_address;
+	struct mptsas_target_reset_event	*target_reset_list;
+	SCSITaskMgmtReply_t *pScsiTmReply;
+
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt completed: "
+	    "(mf = %p, mr = %p)\n", ioc->name, mf, mr));
+
+	pScsiTmReply = (SCSITaskMgmtReply_t *)mr;
+	if (pScsiTmReply) {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "\tTaskMgmt completed: fw_channel = %d, fw_id = %d,\n"
+		    "\ttask_type = 0x%02X, iocstatus = 0x%04X "
+		    "loginfo = 0x%08X,\n\tresponse_code = 0x%02X, "
+		    "term_cmnds = %d\n", ioc->name,
+		    pScsiTmReply->Bus, pScsiTmReply->TargetID,
+		    pScsiTmReply->TaskType,
+		    le16_to_cpu(pScsiTmReply->IOCStatus),
+		    le32_to_cpu(pScsiTmReply->IOCLogInfo),
+		    pScsiTmReply->ResponseCode,
+		    le32_to_cpu(pScsiTmReply->TerminationCount)));
+
+		if (pScsiTmReply->ResponseCode)
+			mptscsih_taskmgmt_response_code(ioc,
+			pScsiTmReply->ResponseCode);
+	}
+
+	if (pScsiTmReply && (pScsiTmReply->TaskType ==
+	    MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK || pScsiTmReply->TaskType ==
+	     MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET)) {
+		ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+		ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+		memcpy(ioc->taskmgmt_cmds.reply, mr,
+		    min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+			complete(&ioc->taskmgmt_cmds.done);
+			return 1;
+		}
+		return 0;
+	}
+
+	mpt_clear_taskmgmt_in_progress_flag(ioc);
 
 	if (list_empty(head))
-		return;
+		return 1;
 
-	target_reset_list = list_entry(head->next, struct mptsas_target_reset_event, list);
+	target_reset_list = list_entry(head->next,
+	    struct mptsas_target_reset_event, list);
 
-	sas_event_data = &target_reset_list->sas_event_data;
-	id = sas_event_data->TargetID;
-	channel = sas_event_data->Bus;
-	hd->resetPending = 0;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "TaskMgmt: completed (%d seconds)\n",
+	    ioc->name, jiffies_to_msecs(jiffies -
+	    target_reset_list->time_count)/1000));
+
+	id = pScsiTmReply->TargetID;
+	channel = pScsiTmReply->Bus;
+	target_reset_list->time_count = jiffies;
 
 	/*
 	 * retry target reset
 	 */
 	if (!target_reset_list->target_reset_issued) {
-		if (mptsas_target_reset(ioc, channel, id)) {
+		if (mptsas_target_reset(ioc, channel, id))
 			target_reset_list->target_reset_issued = 1;
-			hd->resetPending = 1;
-		}
-		return;
+		return 1;
 	}
 
 	/*
 	 * enable work queue to remove device from upper layers
 	 */
 	list_del(&target_reset_list->list);
+	if ((mptsas_find_vtarget(ioc, channel, id)) && !ioc->fw_events_off)
+		mptsas_queue_device_delete(ioc,
+			&target_reset_list->sas_event_data);
 
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
-		    ioc->name,__func__, __LINE__));
-		return;
-	}
-
-	INIT_WORK(&ev->work, mptsas_hotplug_work);
-	ev->ioc = ioc;
-	ev->handle = le16_to_cpu(sas_event_data->DevHandle);
-	ev->parent_handle =
-	    le16_to_cpu(sas_event_data->ParentDevHandle);
-	ev->channel = channel;
-	ev->id =id;
-	ev->phy_id = sas_event_data->PhyNum;
-	memcpy(&sas_address, &sas_event_data->SASAddress,
-	    sizeof(__le64));
-	ev->sas_address = le64_to_cpu(sas_address);
-	ev->device_info = le32_to_cpu(sas_event_data->DeviceInfo);
-	ev->event_type = MPTSAS_DEL_DEVICE;
-	schedule_work(&ev->work);
-	kfree(target_reset_list);
 
 	/*
 	 * issue target reset to next device in the queue
@@ -699,34 +1217,19 @@
 
 	head = &hd->target_reset_list;
 	if (list_empty(head))
-		return;
+		return 1;
 
 	target_reset_list = list_entry(head->next, struct mptsas_target_reset_event,
 	    list);
 
-	sas_event_data = &target_reset_list->sas_event_data;
-	id = sas_event_data->TargetID;
-	channel = sas_event_data->Bus;
+	id = target_reset_list->sas_event_data.TargetID;
+	channel = target_reset_list->sas_event_data.Bus;
+	target_reset_list->time_count = jiffies;
 
-	if (mptsas_target_reset(ioc, channel, id)) {
+	if (mptsas_target_reset(ioc, channel, id))
 		target_reset_list->target_reset_issued = 1;
-		hd->resetPending = 1;
-	}
-}
 
-/**
- * mptsas_taskmgmt_complete
- *
- * @ioc
- * @mf
- * @mr
- *
- **/
-static int
-mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
-{
-	mptsas_dev_reset_complete(ioc);
-	return mptscsih_taskmgmt_complete(ioc, mf, mr);
+	return 1;
 }
 
 /**
@@ -740,37 +1243,59 @@
 mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
 	MPT_SCSI_HOST	*hd;
-	struct mptsas_target_reset_event *target_reset_list, *n;
 	int rc;
 
 	rc = mptscsih_ioc_reset(ioc, reset_phase);
+	if ((ioc->bus_type != SAS) || (!rc))
+		return rc;
 
-	if (ioc->bus_type != SAS)
-		goto out;
-
-	if (reset_phase != MPT_IOC_POST_RESET)
-		goto out;
-
-	if (!ioc->sh || !ioc->sh->hostdata)
-		goto out;
 	hd = shost_priv(ioc->sh);
 	if (!hd->ioc)
 		goto out;
 
-	if (list_empty(&hd->target_reset_list))
-		goto out;
-
-	/* flush the target_reset_list */
-	list_for_each_entry_safe(target_reset_list, n,
-	    &hd->target_reset_list, list) {
-		list_del(&target_reset_list->list);
-		kfree(target_reset_list);
+	switch (reset_phase) {
+	case MPT_IOC_SETUP_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+		mptsas_fw_event_off(ioc);
+		break;
+	case MPT_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_POST_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+		if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->sas_mgmt.status |= MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->sas_mgmt.done);
+		}
+		mptsas_cleanup_fw_event_q(ioc);
+		mptsas_queue_rescan(ioc);
+		mptsas_fw_event_on(ioc);
+		break;
+	default:
+		break;
 	}
 
  out:
 	return rc;
 }
 
+
+/**
+ * enum device_state -
+ * @DEVICE_RETRY: need to retry the TUR
+ * @DEVICE_ERROR: TUR return error, don't add device
+ * @DEVICE_READY: device can be added
+ *
+ */
+enum device_state{
+	DEVICE_RETRY,
+	DEVICE_ERROR,
+	DEVICE_READY,
+};
+
 static int
 mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
 		u32 form, u32 form_specific)
@@ -836,15 +1361,308 @@
 	return error;
 }
 
+/**
+ *	mptsas_add_end_device - report a new end device to sas transport layer
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@phy_info: decribes attached device
+ *
+ *	return (0) success (1) failure
+ *
+ **/
+static int
+mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
+{
+	struct sas_rphy *rphy;
+	struct sas_port *port;
+	struct sas_identify identify;
+	char *ds = NULL;
+	u8 fw_id;
+
+	if (!phy_info) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: exit at line=%d\n", ioc->name,
+			 __func__, __LINE__));
+		return 1;
+	}
+
+	fw_id = phy_info->attached.id;
+
+	if (mptsas_get_rphy(phy_info)) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return 2;
+	}
+
+	port = mptsas_get_port(phy_info);
+	if (!port) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return 3;
+	}
+
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_SSP_TARGET)
+		ds = "ssp";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_STP_TARGET)
+		ds = "stp";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+		ds = "sata";
+
+	printk(MYIOC_s_INFO_FMT "attaching %s device: fw_channel %d, fw_id %d,"
+	    " phy %d, sas_addr 0x%llx\n", ioc->name, ds,
+	    phy_info->attached.channel, phy_info->attached.id,
+	    phy_info->attached.phy_id, (unsigned long long)
+	    phy_info->attached.sas_address);
+
+	mptsas_parse_device_info(&identify, &phy_info->attached);
+	rphy = sas_end_device_alloc(port);
+	if (!rphy) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return 5; /* non-fatal: an rphy can be added later */
+	}
+
+	rphy->identify = identify;
+	if (sas_rphy_add(rphy)) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		sas_rphy_free(rphy);
+		return 6;
+	}
+	mptsas_set_rphy(ioc, phy_info, rphy);
+	return 0;
+}
+
+/**
+ *	mptsas_del_end_device - report a deleted end device to sas transport layer
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@phy_info: decribes attached device
+ *
+ **/
+static void
+mptsas_del_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
+{
+	struct sas_rphy *rphy;
+	struct sas_port *port;
+	struct mptsas_portinfo *port_info;
+	struct mptsas_phyinfo *phy_info_parent;
+	int i;
+	char *ds = NULL;
+	u8 fw_id;
+	u64 sas_address;
+
+	if (!phy_info)
+		return;
+
+	fw_id = phy_info->attached.id;
+	sas_address = phy_info->attached.sas_address;
+
+	if (!phy_info->port_details) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return;
+	}
+	rphy = mptsas_get_rphy(phy_info);
+	if (!rphy) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return;
+	}
+
+	if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_INITIATOR
+		|| phy_info->attached.device_info
+			& MPI_SAS_DEVICE_INFO_SMP_INITIATOR
+		|| phy_info->attached.device_info
+			& MPI_SAS_DEVICE_INFO_STP_INITIATOR)
+		ds = "initiator";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_SSP_TARGET)
+		ds = "ssp";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_STP_TARGET)
+		ds = "stp";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+		ds = "sata";
+
+	dev_printk(KERN_DEBUG, &rphy->dev, MYIOC_s_FMT
+	    "removing %s device: fw_channel %d, fw_id %d, phy %d,"
+	    "sas_addr 0x%llx\n", ioc->name, ds, phy_info->attached.channel,
+	    phy_info->attached.id, phy_info->attached.phy_id,
+	    (unsigned long long) sas_address);
+
+	port = mptsas_get_port(phy_info);
+	if (!port) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return;
+	}
+	port_info = phy_info->portinfo;
+	phy_info_parent = port_info->phy_info;
+	for (i = 0; i < port_info->num_phys; i++, phy_info_parent++) {
+		if (!phy_info_parent->phy)
+			continue;
+		if (phy_info_parent->attached.sas_address !=
+		    sas_address)
+			continue;
+		dev_printk(KERN_DEBUG, &phy_info_parent->phy->dev,
+		    MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n",
+		    ioc->name, phy_info_parent->phy_id,
+		    phy_info_parent->phy);
+		sas_port_delete_phy(port, phy_info_parent->phy);
+	}
+
+	dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT
+	    "delete port %d, sas_addr (0x%llx)\n", ioc->name,
+	     port->port_identifier, (unsigned long long)sas_address);
+	sas_port_delete(port);
+	mptsas_set_port(ioc, phy_info, NULL);
+	mptsas_port_delete(ioc, phy_info->port_details);
+}
+
+struct mptsas_phyinfo *
+mptsas_refreshing_device_handles(MPT_ADAPTER *ioc,
+	struct mptsas_devinfo *sas_device)
+{
+	struct mptsas_phyinfo *phy_info;
+	struct mptsas_portinfo *port_info;
+	int i;
+
+	phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+	    sas_device->sas_address);
+	if (!phy_info)
+		goto out;
+	port_info = phy_info->portinfo;
+	if (!port_info)
+		goto out;
+	mutex_lock(&ioc->sas_topology_mutex);
+	for (i = 0; i < port_info->num_phys; i++) {
+		if (port_info->phy_info[i].attached.sas_address !=
+			sas_device->sas_address)
+			continue;
+		port_info->phy_info[i].attached.channel = sas_device->channel;
+		port_info->phy_info[i].attached.id = sas_device->id;
+		port_info->phy_info[i].attached.sas_address =
+		    sas_device->sas_address;
+		port_info->phy_info[i].attached.handle = sas_device->handle;
+		port_info->phy_info[i].attached.handle_parent =
+		    sas_device->handle_parent;
+		port_info->phy_info[i].attached.handle_enclosure =
+		    sas_device->handle_enclosure;
+	}
+	mutex_unlock(&ioc->sas_topology_mutex);
+ out:
+	return phy_info;
+}
+
+/**
+ * mptsas_firmware_event_work - work thread for processing fw events
+ * @work: work queue payload containing info describing the event
+ * Context: user
+ *
+ */
+static void
+mptsas_firmware_event_work(struct work_struct *work)
+{
+	struct fw_event_work *fw_event =
+		container_of(work, struct fw_event_work, work.work);
+	MPT_ADAPTER *ioc = fw_event->ioc;
+
+	/* special rescan topology handling */
+	if (fw_event->event == -1) {
+		if (ioc->in_rescan) {
+			devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+				"%s: rescan ignored as it is in progress\n",
+				ioc->name, __func__));
+			return;
+		}
+		devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: rescan after "
+		    "reset\n", ioc->name, __func__));
+		ioc->in_rescan = 1;
+		mptsas_not_responding_devices(ioc);
+		mptsas_scan_sas_topology(ioc);
+		ioc->in_rescan = 0;
+		mptsas_free_fw_event(ioc, fw_event);
+		return;
+	}
+
+	/* events handling turned off during host reset */
+	if (ioc->fw_events_off) {
+		mptsas_free_fw_event(ioc, fw_event);
+		return;
+	}
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: fw_event=(0x%p), "
+	    "event = (0x%02x)\n", ioc->name, __func__, fw_event,
+	    (fw_event->event & 0xFF)));
+
+	switch (fw_event->event) {
+	case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
+		mptsas_send_sas_event(fw_event);
+		break;
+	case MPI_EVENT_INTEGRATED_RAID:
+		mptsas_send_raid_event(fw_event);
+		break;
+	case MPI_EVENT_IR2:
+		mptsas_send_ir2_event(fw_event);
+		break;
+	case MPI_EVENT_PERSISTENT_TABLE_FULL:
+		mptbase_sas_persist_operation(ioc,
+		    MPI_SAS_OP_CLEAR_NOT_PRESENT);
+		mptsas_free_fw_event(ioc, fw_event);
+		break;
+	case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
+		mptsas_broadcast_primative_work(fw_event);
+		break;
+	case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+		mptsas_send_expander_event(fw_event);
+		break;
+	case MPI_EVENT_SAS_PHY_LINK_STATUS:
+		mptsas_send_link_status_event(fw_event);
+		break;
+	case MPI_EVENT_QUEUE_FULL:
+		mptsas_handle_queue_full_event(fw_event);
+		break;
+	}
+}
+
+
+
 static int
 mptsas_slave_configure(struct scsi_device *sdev)
 {
+	struct Scsi_Host	*host = sdev->host;
+	MPT_SCSI_HOST	*hd = shost_priv(host);
+	MPT_ADAPTER	*ioc = hd->ioc;
+	VirtDevice	*vdevice = sdev->hostdata;
 
-	if (sdev->channel == MPTSAS_RAID_CHANNEL)
+	if (vdevice->vtarget->deleted) {
+		sdev_printk(KERN_INFO, sdev, "clearing deleted flag\n");
+		vdevice->vtarget->deleted = 0;
+	}
+
+	/*
+	 * RAID volumes placed beyond the last expected port.
+	 * Ignore sending sas mode pages in that case..
+	 */
+	if (sdev->channel == MPTSAS_RAID_CHANNEL) {
+		mptsas_add_device_component_starget_ir(ioc, scsi_target(sdev));
 		goto out;
+	}
 
 	sas_read_port_mode_page(sdev);
 
+	mptsas_add_device_component_starget(ioc, scsi_target(sdev));
+
  out:
 	return mptscsih_slave_configure(sdev);
 }
@@ -875,9 +1693,18 @@
 	 * RAID volumes placed beyond the last expected port.
 	 */
 	if (starget->channel == MPTSAS_RAID_CHANNEL) {
-		for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
-			if (id == ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID)
-				channel = ioc->raid_data.pIocPg2->RaidVolume[i].VolumeBus;
+		if (!ioc->raid_data.pIocPg2) {
+			kfree(vtarget);
+			return -ENXIO;
+		}
+		for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+			if (id == ioc->raid_data.pIocPg2->
+					RaidVolume[i].VolumeID) {
+				channel = ioc->raid_data.pIocPg2->
+					RaidVolume[i].VolumeBus;
+			}
+		}
+		vtarget->raidVolume = 1;
 		goto out;
 	}
 
@@ -926,11 +1753,18 @@
 	struct sas_rphy		*rphy;
 	struct mptsas_portinfo	*p;
 	int 			 i;
-	MPT_ADAPTER *ioc = hd->ioc;
+	MPT_ADAPTER	*ioc = hd->ioc;
+	VirtTarget	*vtarget;
 
 	if (!starget->hostdata)
 		return;
 
+	vtarget = starget->hostdata;
+
+	mptsas_del_device_component_by_os(ioc, starget->channel,
+	    starget->id);
+
+
 	if (starget->channel == MPTSAS_RAID_CHANNEL)
 		goto out;
 
@@ -940,12 +1774,21 @@
 			if (p->phy_info[i].attached.sas_address !=
 					rphy->identify.sas_address)
 				continue;
+
+			starget_printk(KERN_INFO, starget, MYIOC_s_FMT
+			"delete device: fw_channel %d, fw_id %d, phy %d, "
+			"sas_addr 0x%llx\n", ioc->name,
+			p->phy_info[i].attached.channel,
+			p->phy_info[i].attached.id,
+			p->phy_info[i].attached.phy_id, (unsigned long long)
+			p->phy_info[i].attached.sas_address);
+
 			mptsas_set_starget(&p->phy_info[i], NULL);
-			goto out;
 		}
 	}
 
  out:
+	vtarget->starget = NULL;
 	kfree(starget->hostdata);
 	starget->hostdata = NULL;
 }
@@ -1008,6 +1851,8 @@
 static int
 mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
+	MPT_SCSI_HOST	*hd;
+	MPT_ADAPTER	*ioc;
 	VirtDevice	*vdevice = SCpnt->device->hostdata;
 
 	if (!vdevice || !vdevice->vtarget || vdevice->vtarget->deleted) {
@@ -1016,6 +1861,12 @@
 		return 0;
 	}
 
+	hd = shost_priv(SCpnt->device->host);
+	ioc = hd->ioc;
+
+	if (ioc->sas_discovery_quiesce_io)
+		return SCSI_MLQUEUE_HOST_BUSY;
+
 //	scsi_print_command(SCpnt);
 
 	return mptscsih_qcmd(SCpnt,done);
@@ -1114,14 +1965,19 @@
 static int mptsas_mgmt_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
 		MPT_FRAME_HDR *reply)
 {
-	ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_COMMAND_GOOD;
+	ioc->sas_mgmt.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
 	if (reply != NULL) {
-		ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_RF_VALID;
+		ioc->sas_mgmt.status |= MPT_MGMT_STATUS_RF_VALID;
 		memcpy(ioc->sas_mgmt.reply, reply,
 		    min(ioc->reply_sz, 4 * reply->u.reply.MsgLength));
 	}
-	complete(&ioc->sas_mgmt.done);
-	return 1;
+
+	if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) {
+		ioc->sas_mgmt.status &= ~MPT_MGMT_STATUS_PENDING;
+		complete(&ioc->sas_mgmt.done);
+		return 1;
+	}
+	return 0;
 }
 
 static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
@@ -1160,6 +2016,7 @@
 		MPI_SAS_OP_PHY_HARD_RESET : MPI_SAS_OP_PHY_LINK_RESET;
 	req->PhyNum = phy->identify.phy_identifier;
 
+	INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status)
 	mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
 
 	timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done,
@@ -1174,7 +2031,7 @@
 
 	/* a reply frame is expected */
 	if ((ioc->sas_mgmt.status &
-	    MPT_IOCTL_STATUS_RF_VALID) == 0) {
+	    MPT_MGMT_STATUS_RF_VALID) == 0) {
 		error = -ENXIO;
 		goto out_unlock;
 	}
@@ -1191,6 +2048,7 @@
 	error = 0;
 
  out_unlock:
+	CLEAR_MGMT_STATUS(ioc->sas_mgmt.status)
 	mutex_unlock(&ioc->sas_mgmt.mutex);
  out:
 	return error;
@@ -1304,7 +2162,7 @@
 		struct mptsas_portinfo *port_info;
 
 		mutex_lock(&ioc->sas_topology_mutex);
-		port_info = mptsas_get_hba_portinfo(ioc);
+		port_info = ioc->hba_port_info;
 		if (port_info && port_info->phy_info)
 			sas_address =
 				port_info->phy_info[0].phy->identify.sas_address;
@@ -1319,26 +2177,32 @@
 	/* request */
 	flagsLength = (MPI_SGE_FLAGS_SIMPLE_ELEMENT |
 		       MPI_SGE_FLAGS_END_OF_BUFFER |
-		       MPI_SGE_FLAGS_DIRECTION |
-		       mpt_addr_size()) << MPI_SGE_FLAGS_SHIFT;
+		       MPI_SGE_FLAGS_DIRECTION)
+		       << MPI_SGE_FLAGS_SHIFT;
 	flagsLength |= (blk_rq_bytes(req) - 4);
 
 	dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio),
 				      blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
 	if (!dma_addr_out)
 		goto put_mf;
-	mpt_add_sge(psge, flagsLength, dma_addr_out);
-	psge += (sizeof(u32) + sizeof(dma_addr_t));
+	ioc->add_sge(psge, flagsLength, dma_addr_out);
+	psge += ioc->SGE_size;
 
 	/* response */
-	flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
+	flagsLength = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
+		MPI_SGE_FLAGS_SYSTEM_ADDRESS |
+		MPI_SGE_FLAGS_IOC_TO_HOST |
+		MPI_SGE_FLAGS_END_OF_BUFFER;
+
+	flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT;
 	flagsLength |= blk_rq_bytes(rsp) + 4;
 	dma_addr_in =  pci_map_single(ioc->pcidev, bio_data(rsp->bio),
 				      blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
 	if (!dma_addr_in)
 		goto unmap;
-	mpt_add_sge(psge, flagsLength, dma_addr_in);
+	ioc->add_sge(psge, flagsLength, dma_addr_in);
 
+	INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status)
 	mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
 
 	timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ);
@@ -1351,7 +2215,7 @@
 	}
 	mf = NULL;
 
-	if (ioc->sas_mgmt.status & MPT_IOCTL_STATUS_RF_VALID) {
+	if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_RF_VALID) {
 		SmpPassthroughReply_t *smprep;
 
 		smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
@@ -1360,7 +2224,8 @@
 		req->resid_len = 0;
 		rsp->resid_len -= smprep->ResponseDataLength;
 	} else {
-		printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
+		printk(MYIOC_s_ERR_FMT
+		    "%s: smp passthru reply failed to be returned\n",
 		    ioc->name, __func__);
 		ret = -ENXIO;
 	}
@@ -1375,6 +2240,7 @@
 	if (mf)
 		mpt_free_msg_frame(ioc, mf);
 out_unlock:
+	CLEAR_MGMT_STATUS(ioc->sas_mgmt.status)
 	mutex_unlock(&ioc->sas_mgmt.mutex);
 out:
 	return ret;
@@ -1438,7 +2304,7 @@
 
 	port_info->num_phys = buffer->NumPhys;
 	port_info->phy_info = kcalloc(port_info->num_phys,
-		sizeof(*port_info->phy_info),GFP_KERNEL);
+		sizeof(struct mptsas_phyinfo), GFP_KERNEL);
 	if (!port_info->phy_info) {
 		error = -ENOMEM;
 		goto out_free_consistent;
@@ -1600,10 +2466,6 @@
 	__le64 sas_address;
 	int error=0;
 
-	if (ioc->sas_discovery_runtime &&
-		mptsas_is_end_device(device_info))
-			goto out;
-
 	hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION;
 	hdr.ExtPageLength = 0;
 	hdr.PageNumber = 0;
@@ -1644,6 +2506,7 @@
 
 	mptsas_print_device_pg0(ioc, buffer);
 
+	memset(device_info, 0, sizeof(struct mptsas_devinfo));
 	device_info->handle = le16_to_cpu(buffer->DevHandle);
 	device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle);
 	device_info->handle_enclosure =
@@ -1675,7 +2538,9 @@
 	SasExpanderPage0_t *buffer;
 	dma_addr_t dma_handle;
 	int i, error;
+	__le64 sas_address;
 
+	memset(port_info, 0, sizeof(struct mptsas_portinfo));
 	hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
 	hdr.ExtPageLength = 0;
 	hdr.PageNumber = 0;
@@ -1721,18 +2586,23 @@
 	}
 
 	/* save config data */
-	port_info->num_phys = buffer->NumPhys;
+	port_info->num_phys = (buffer->NumPhys) ? buffer->NumPhys : 1;
 	port_info->phy_info = kcalloc(port_info->num_phys,
-		sizeof(*port_info->phy_info),GFP_KERNEL);
+		sizeof(struct mptsas_phyinfo), GFP_KERNEL);
 	if (!port_info->phy_info) {
 		error = -ENOMEM;
 		goto out_free_consistent;
 	}
 
+	memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64));
 	for (i = 0; i < port_info->num_phys; i++) {
 		port_info->phy_info[i].portinfo = port_info;
 		port_info->phy_info[i].handle =
 		    le16_to_cpu(buffer->DevHandle);
+		port_info->phy_info[i].identify.sas_address =
+		    le64_to_cpu(sas_address);
+		port_info->phy_info[i].identify.handle_parent =
+		    le16_to_cpu(buffer->ParentDevHandle);
 	}
 
  out_free_consistent:
@@ -1752,11 +2622,7 @@
 	dma_addr_t dma_handle;
 	int error=0;
 
-	if (ioc->sas_discovery_runtime &&
-		mptsas_is_end_device(&phy_info->attached))
-			goto out;
-
-	hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
+	hdr.PageVersion = MPI_SASEXPANDER1_PAGEVERSION;
 	hdr.ExtPageLength = 0;
 	hdr.PageNumber = 1;
 	hdr.Reserved1 = 0;
@@ -1791,6 +2657,12 @@
 	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 
 	error = mpt_config(ioc, &cfg);
+
+	if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
+		error = -ENODEV;
+		goto out;
+	}
+
 	if (error)
 		goto out_free_consistent;
 
@@ -2010,16 +2882,21 @@
 				goto out;
 			}
 			mptsas_set_port(ioc, phy_info, port);
-			dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-			    "sas_port_alloc: port=%p dev=%p port_id=%d\n",
-			    ioc->name, port, dev, port->port_identifier));
+			devtprintk(ioc, dev_printk(KERN_DEBUG, &port->dev,
+			    MYIOC_s_FMT "add port %d, sas_addr (0x%llx)\n",
+			    ioc->name, port->port_identifier,
+			    (unsigned long long)phy_info->
+			    attached.sas_address));
 		}
-		dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_port_add_phy: phy_id=%d\n",
-		    ioc->name, phy_info->phy_id));
+		dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"sas_port_add_phy: phy_id=%d\n",
+			ioc->name, phy_info->phy_id));
 		sas_port_add_phy(port, phy_info->phy);
 		phy_info->sas_port_add_phy = 0;
+		devtprintk(ioc, dev_printk(KERN_DEBUG, &phy_info->phy->dev,
+		    MYIOC_s_FMT "add phy %d, phy-obj (0x%p)\n", ioc->name,
+		     phy_info->phy_id, phy_info->phy));
 	}
-
 	if (!mptsas_get_rphy(phy_info) && port && !port->rphy) {
 
 		struct sas_rphy *rphy;
@@ -2032,18 +2909,17 @@
 		 * the adding/removing of devices that occur
 		 * after start of day.
 		 */
-		if (ioc->sas_discovery_runtime &&
-			mptsas_is_end_device(&phy_info->attached))
-				goto out;
+		if (mptsas_is_end_device(&phy_info->attached) &&
+		    phy_info->attached.handle_parent) {
+			goto out;
+		}
 
 		mptsas_parse_device_info(&identify, &phy_info->attached);
 		if (scsi_is_host_device(parent)) {
 			struct mptsas_portinfo *port_info;
 			int i;
 
-			mutex_lock(&ioc->sas_topology_mutex);
-			port_info = mptsas_get_hba_portinfo(ioc);
-			mutex_unlock(&ioc->sas_topology_mutex);
+			port_info = ioc->hba_port_info;
 
 			for (i = 0; i < port_info->num_phys; i++)
 				if (port_info->phy_info[i].identify.sas_address ==
@@ -2102,7 +2978,7 @@
 	struct mptsas_portinfo *port_info, *hba;
 	int error = -ENOMEM, i;
 
-	hba = kzalloc(sizeof(*port_info), GFP_KERNEL);
+	hba = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL);
 	if (! hba)
 		goto out;
 
@@ -2112,9 +2988,10 @@
 
 	mptsas_sas_io_unit_pg1(ioc);
 	mutex_lock(&ioc->sas_topology_mutex);
-	port_info = mptsas_get_hba_portinfo(ioc);
+	port_info = ioc->hba_port_info;
 	if (!port_info) {
-		port_info = hba;
+		ioc->hba_port_info = port_info = hba;
+		ioc->hba_port_num_phy = port_info->num_phys;
 		list_add_tail(&port_info->list, &ioc->sas_topology);
 	} else {
 		for (i = 0; i < hba->num_phys; i++) {
@@ -2130,15 +3007,22 @@
 		hba = NULL;
 	}
 	mutex_unlock(&ioc->sas_topology_mutex);
+#if defined(CPQ_CIM)
+	ioc->num_ports = port_info->num_phys;
+#endif
 	for (i = 0; i < port_info->num_phys; i++) {
 		mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i],
 			(MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER <<
 			 MPI_SAS_PHY_PGAD_FORM_SHIFT), i);
-
+		port_info->phy_info[i].identify.handle =
+		    port_info->phy_info[i].handle;
 		mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
 			(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
 			 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-			 port_info->phy_info[i].handle);
+			 port_info->phy_info[i].identify.handle);
+		if (!ioc->hba_port_sas_addr)
+			ioc->hba_port_sas_addr =
+			    port_info->phy_info[i].identify.sas_address;
 		port_info->phy_info[i].identify.phy_id =
 		    port_info->phy_info[i].phy_id = i;
 		if (port_info->phy_info[i].attached.handle)
@@ -2163,247 +3047,720 @@
 	return error;
 }
 
-static int
-mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
+static void
+mptsas_expander_refresh(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 {
-	struct mptsas_portinfo *port_info, *p, *ex;
-	struct device *parent;
-	struct sas_rphy *rphy;
-	int error = -ENOMEM, i, j;
+	struct mptsas_portinfo *parent;
+	struct device *parent_dev;
+	struct sas_rphy	*rphy;
+	int		i;
+	u64		sas_address; /* expander sas address */
+	u32		handle;
 
-	ex = kzalloc(sizeof(*port_info), GFP_KERNEL);
-	if (!ex)
-		goto out;
-
-	error = mptsas_sas_expander_pg0(ioc, ex,
-	    (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
-	     MPI_SAS_EXPAND_PGAD_FORM_SHIFT), *handle);
-	if (error)
-		goto out_free_port_info;
-
-	*handle = ex->phy_info[0].handle;
-
-	mutex_lock(&ioc->sas_topology_mutex);
-	port_info = mptsas_find_portinfo_by_handle(ioc, *handle);
-	if (!port_info) {
-		port_info = ex;
-		list_add_tail(&port_info->list, &ioc->sas_topology);
-	} else {
-		for (i = 0; i < ex->num_phys; i++) {
-			port_info->phy_info[i].handle =
-				ex->phy_info[i].handle;
-			port_info->phy_info[i].port_id =
-				ex->phy_info[i].port_id;
-		}
-		kfree(ex->phy_info);
-		kfree(ex);
-		ex = NULL;
-	}
-	mutex_unlock(&ioc->sas_topology_mutex);
-
+	handle = port_info->phy_info[0].handle;
+	sas_address = port_info->phy_info[0].identify.sas_address;
 	for (i = 0; i < port_info->num_phys; i++) {
 		mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i],
-			(MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
-			 MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + *handle);
+		    (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
+		    MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + handle);
 
-		if (port_info->phy_info[i].identify.handle) {
-			mptsas_sas_device_pg0(ioc,
-				&port_info->phy_info[i].identify,
-				(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
-				 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-				port_info->phy_info[i].identify.handle);
-			port_info->phy_info[i].identify.phy_id =
-			    port_info->phy_info[i].phy_id;
-		}
+		mptsas_sas_device_pg0(ioc,
+		    &port_info->phy_info[i].identify,
+		    (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+		    MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+		    port_info->phy_info[i].identify.handle);
+		port_info->phy_info[i].identify.phy_id =
+		    port_info->phy_info[i].phy_id;
 
 		if (port_info->phy_info[i].attached.handle) {
 			mptsas_sas_device_pg0(ioc,
-				&port_info->phy_info[i].attached,
-				(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
-				 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-				port_info->phy_info[i].attached.handle);
+			    &port_info->phy_info[i].attached,
+			    (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+			     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+			    port_info->phy_info[i].attached.handle);
 			port_info->phy_info[i].attached.phy_id =
 			    port_info->phy_info[i].phy_id;
 		}
 	}
 
-	parent = &ioc->sh->shost_gendev;
-	for (i = 0; i < port_info->num_phys; i++) {
-		mutex_lock(&ioc->sas_topology_mutex);
-		list_for_each_entry(p, &ioc->sas_topology, list) {
-			for (j = 0; j < p->num_phys; j++) {
-				if (port_info->phy_info[i].identify.handle !=
-						p->phy_info[j].attached.handle)
-					continue;
-				rphy = mptsas_get_rphy(&p->phy_info[j]);
-				parent = &rphy->dev;
-			}
-		}
-		mutex_unlock(&ioc->sas_topology_mutex);
-	}
-
-	mptsas_setup_wide_ports(ioc, port_info);
-
-	for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
-		mptsas_probe_one_phy(parent, &port_info->phy_info[i],
-		    ioc->sas_index, 0);
-
-	return 0;
-
- out_free_port_info:
-	if (ex) {
-		kfree(ex->phy_info);
-		kfree(ex);
-	}
- out:
-	return error;
-}
-
-/*
- * mptsas_delete_expander_phys
- *
- *
- * This will traverse topology, and remove expanders
- * that are no longer present
- */
-static void
-mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
-{
-	struct mptsas_portinfo buffer;
-	struct mptsas_portinfo *port_info, *n, *parent;
-	struct mptsas_phyinfo *phy_info;
-	struct sas_port * port;
-	int i;
-	u64	expander_sas_address;
-
 	mutex_lock(&ioc->sas_topology_mutex);
-	list_for_each_entry_safe(port_info, n, &ioc->sas_topology, list) {
-
-		if (!(port_info->phy_info[0].identify.device_info &
-		    MPI_SAS_DEVICE_INFO_SMP_TARGET))
-			continue;
-
-		if (mptsas_sas_expander_pg0(ioc, &buffer,
-		     (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
-		     MPI_SAS_EXPAND_PGAD_FORM_SHIFT),
-		     port_info->phy_info[0].handle)) {
-
-			/*
-			 * Obtain the port_info instance to the parent port
-			 */
-			parent = mptsas_find_portinfo_by_handle(ioc,
-			    port_info->phy_info[0].identify.handle_parent);
-
-			if (!parent)
-				goto next_port;
-
-			expander_sas_address =
-				port_info->phy_info[0].identify.sas_address;
-
-			/*
-			 * Delete rphys in the parent that point
-			 * to this expander.  The transport layer will
-			 * cleanup all the children.
-			 */
-			phy_info = parent->phy_info;
-			for (i = 0; i < parent->num_phys; i++, phy_info++) {
-				port = mptsas_get_port(phy_info);
-				if (!port)
-					continue;
-				if (phy_info->attached.sas_address !=
-					expander_sas_address)
-					continue;
-				dsaswideprintk(ioc,
-				    dev_printk(KERN_DEBUG, &port->dev,
-				    MYIOC_s_FMT "delete port (%d)\n", ioc->name,
-				    port->port_identifier));
-				sas_port_delete(port);
-				mptsas_port_delete(ioc, phy_info->port_details);
-			}
- next_port:
-
-			phy_info = port_info->phy_info;
-			for (i = 0; i < port_info->num_phys; i++, phy_info++)
-				mptsas_port_delete(ioc, phy_info->port_details);
-
-			list_del(&port_info->list);
-			kfree(port_info->phy_info);
-			kfree(port_info);
+	parent = mptsas_find_portinfo_by_handle(ioc,
+	    port_info->phy_info[0].identify.handle_parent);
+	if (!parent) {
+		mutex_unlock(&ioc->sas_topology_mutex);
+		return;
+	}
+	for (i = 0, parent_dev = NULL; i < parent->num_phys && !parent_dev;
+	    i++) {
+		if (parent->phy_info[i].attached.sas_address == sas_address) {
+			rphy = mptsas_get_rphy(&parent->phy_info[i]);
+			parent_dev = &rphy->dev;
 		}
-		/*
-		* Free this memory allocated from inside
-		* mptsas_sas_expander_pg0
-		*/
-		kfree(buffer.phy_info);
 	}
 	mutex_unlock(&ioc->sas_topology_mutex);
+
+	mptsas_setup_wide_ports(ioc, port_info);
+	for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
+		mptsas_probe_one_phy(parent_dev, &port_info->phy_info[i],
+		    ioc->sas_index, 0);
 }
 
-/*
- * Start of day discovery
+static void
+mptsas_expander_event_add(MPT_ADAPTER *ioc,
+    MpiEventDataSasExpanderStatusChange_t *expander_data)
+{
+	struct mptsas_portinfo *port_info;
+	int i;
+	__le64 sas_address;
+
+	port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL);
+	if (!port_info)
+		BUG();
+	port_info->num_phys = (expander_data->NumPhys) ?
+	    expander_data->NumPhys : 1;
+	port_info->phy_info = kcalloc(port_info->num_phys,
+	    sizeof(struct mptsas_phyinfo), GFP_KERNEL);
+	if (!port_info->phy_info)
+		BUG();
+	memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64));
+	for (i = 0; i < port_info->num_phys; i++) {
+		port_info->phy_info[i].portinfo = port_info;
+		port_info->phy_info[i].handle =
+		    le16_to_cpu(expander_data->DevHandle);
+		port_info->phy_info[i].identify.sas_address =
+		    le64_to_cpu(sas_address);
+		port_info->phy_info[i].identify.handle_parent =
+		    le16_to_cpu(expander_data->ParentDevHandle);
+	}
+
+	mutex_lock(&ioc->sas_topology_mutex);
+	list_add_tail(&port_info->list, &ioc->sas_topology);
+	mutex_unlock(&ioc->sas_topology_mutex);
+
+	printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
+	    "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+	    (unsigned long long)sas_address);
+
+	mptsas_expander_refresh(ioc, port_info);
+}
+
+/**
+ * mptsas_delete_expander_siblings - remove siblings attached to expander
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @parent: the parent port_info object
+ * @expander: the expander port_info object
+ **/
+static void
+mptsas_delete_expander_siblings(MPT_ADAPTER *ioc, struct mptsas_portinfo
+    *parent, struct mptsas_portinfo *expander)
+{
+	struct mptsas_phyinfo *phy_info;
+	struct mptsas_portinfo *port_info;
+	struct sas_rphy *rphy;
+	int i;
+
+	phy_info = expander->phy_info;
+	for (i = 0; i < expander->num_phys; i++, phy_info++) {
+		rphy = mptsas_get_rphy(phy_info);
+		if (!rphy)
+			continue;
+		if (rphy->identify.device_type == SAS_END_DEVICE)
+			mptsas_del_end_device(ioc, phy_info);
+	}
+
+	phy_info = expander->phy_info;
+	for (i = 0; i < expander->num_phys; i++, phy_info++) {
+		rphy = mptsas_get_rphy(phy_info);
+		if (!rphy)
+			continue;
+		if (rphy->identify.device_type ==
+		    MPI_SAS_DEVICE_INFO_EDGE_EXPANDER ||
+		    rphy->identify.device_type ==
+		    MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER) {
+			port_info = mptsas_find_portinfo_by_sas_address(ioc,
+			    rphy->identify.sas_address);
+			if (!port_info)
+				continue;
+			if (port_info == parent) /* backlink rphy */
+				continue;
+			/*
+			Delete this expander even if the expdevpage is exists
+			because the parent expander is already deleted
+			*/
+			mptsas_expander_delete(ioc, port_info, 1);
+		}
+	}
+}
+
+
+/**
+ *	mptsas_expander_delete - remove this expander
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@port_info: expander port_info struct
+ *	@force: Flag to forcefully delete the expander
+ *
+ **/
+
+static void mptsas_expander_delete(MPT_ADAPTER *ioc,
+		struct mptsas_portinfo *port_info, u8 force)
+{
+
+	struct mptsas_portinfo *parent;
+	int		i;
+	u64		expander_sas_address;
+	struct mptsas_phyinfo *phy_info;
+	struct mptsas_portinfo buffer;
+	struct mptsas_portinfo_details *port_details;
+	struct sas_port *port;
+
+	if (!port_info)
+		return;
+
+	/* see if expander is still there before deleting */
+	mptsas_sas_expander_pg0(ioc, &buffer,
+	    (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
+	    MPI_SAS_EXPAND_PGAD_FORM_SHIFT),
+	    port_info->phy_info[0].identify.handle);
+
+	if (buffer.num_phys) {
+		kfree(buffer.phy_info);
+		if (!force)
+			return;
+	}
+
+
+	/*
+	 * Obtain the port_info instance to the parent port
+	 */
+	port_details = NULL;
+	expander_sas_address =
+	    port_info->phy_info[0].identify.sas_address;
+	parent = mptsas_find_portinfo_by_handle(ioc,
+	    port_info->phy_info[0].identify.handle_parent);
+	mptsas_delete_expander_siblings(ioc, parent, port_info);
+	if (!parent)
+		goto out;
+
+	/*
+	 * Delete rphys in the parent that point
+	 * to this expander.
+	 */
+	phy_info = parent->phy_info;
+	port = NULL;
+	for (i = 0; i < parent->num_phys; i++, phy_info++) {
+		if (!phy_info->phy)
+			continue;
+		if (phy_info->attached.sas_address !=
+		    expander_sas_address)
+			continue;
+		if (!port) {
+			port = mptsas_get_port(phy_info);
+			port_details = phy_info->port_details;
+		}
+		dev_printk(KERN_DEBUG, &phy_info->phy->dev,
+		    MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n", ioc->name,
+		    phy_info->phy_id, phy_info->phy);
+		sas_port_delete_phy(port, phy_info->phy);
+	}
+	if (port) {
+		dev_printk(KERN_DEBUG, &port->dev,
+		    MYIOC_s_FMT "delete port %d, sas_addr (0x%llx)\n",
+		    ioc->name, port->port_identifier,
+		    (unsigned long long)expander_sas_address);
+		sas_port_delete(port);
+		mptsas_port_delete(ioc, port_details);
+	}
+ out:
+
+	printk(MYIOC_s_INFO_FMT "delete expander: num_phys %d, "
+	    "sas_addr (0x%llx)\n",  ioc->name, port_info->num_phys,
+	    (unsigned long long)expander_sas_address);
+
+	/*
+	 * free link
+	 */
+	list_del(&port_info->list);
+	kfree(port_info->phy_info);
+	kfree(port_info);
+}
+
+
+/**
+ * mptsas_send_expander_event - expanders events
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @expander_data: event data
+ *
+ *
+ * This function handles adding, removing, and refreshing
+ * device handles within the expander objects.
  */
 static void
+mptsas_send_expander_event(struct fw_event_work *fw_event)
+{
+	MPT_ADAPTER *ioc;
+	MpiEventDataSasExpanderStatusChange_t *expander_data;
+	struct mptsas_portinfo *port_info;
+	__le64 sas_address;
+	int i;
+
+	ioc = fw_event->ioc;
+	expander_data = (MpiEventDataSasExpanderStatusChange_t *)
+	    fw_event->event_data;
+	memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64));
+	port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address);
+
+	if (expander_data->ReasonCode == MPI_EVENT_SAS_EXP_RC_ADDED) {
+		if (port_info) {
+			for (i = 0; i < port_info->num_phys; i++) {
+				port_info->phy_info[i].portinfo = port_info;
+				port_info->phy_info[i].handle =
+				    le16_to_cpu(expander_data->DevHandle);
+				port_info->phy_info[i].identify.sas_address =
+				    le64_to_cpu(sas_address);
+				port_info->phy_info[i].identify.handle_parent =
+				    le16_to_cpu(expander_data->ParentDevHandle);
+			}
+			mptsas_expander_refresh(ioc, port_info);
+		} else if (!port_info && expander_data->NumPhys)
+			mptsas_expander_event_add(ioc, expander_data);
+	} else if (expander_data->ReasonCode ==
+	    MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING)
+		mptsas_expander_delete(ioc, port_info, 0);
+
+	mptsas_free_fw_event(ioc, fw_event);
+}
+
+
+/**
+ * mptsas_expander_add -
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @handle:
+ *
+ */
+struct mptsas_portinfo *
+mptsas_expander_add(MPT_ADAPTER *ioc, u16 handle)
+{
+	struct mptsas_portinfo buffer, *port_info;
+	int i;
+
+	if ((mptsas_sas_expander_pg0(ioc, &buffer,
+	    (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
+	    MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle)))
+		return NULL;
+
+	port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_ATOMIC);
+	if (!port_info) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+		"%s: exit at line=%d\n", ioc->name,
+		__func__, __LINE__));
+		return NULL;
+	}
+	port_info->num_phys = buffer.num_phys;
+	port_info->phy_info = buffer.phy_info;
+	for (i = 0; i < port_info->num_phys; i++)
+		port_info->phy_info[i].portinfo = port_info;
+	mutex_lock(&ioc->sas_topology_mutex);
+	list_add_tail(&port_info->list, &ioc->sas_topology);
+	mutex_unlock(&ioc->sas_topology_mutex);
+	printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
+	    "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+	    (unsigned long long)buffer.phy_info[0].identify.sas_address);
+	mptsas_expander_refresh(ioc, port_info);
+	return port_info;
+}
+
+static void
+mptsas_send_link_status_event(struct fw_event_work *fw_event)
+{
+	MPT_ADAPTER *ioc;
+	MpiEventDataSasPhyLinkStatus_t *link_data;
+	struct mptsas_portinfo *port_info;
+	struct mptsas_phyinfo *phy_info = NULL;
+	__le64 sas_address;
+	u8 phy_num;
+	u8 link_rate;
+
+	ioc = fw_event->ioc;
+	link_data = (MpiEventDataSasPhyLinkStatus_t *)fw_event->event_data;
+
+	memcpy(&sas_address, &link_data->SASAddress, sizeof(__le64));
+	sas_address = le64_to_cpu(sas_address);
+	link_rate = link_data->LinkRates >> 4;
+	phy_num = link_data->PhyNum;
+
+	port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address);
+	if (port_info) {
+		phy_info = &port_info->phy_info[phy_num];
+		if (phy_info)
+			phy_info->negotiated_link_rate = link_rate;
+	}
+
+	if (link_rate == MPI_SAS_IOUNIT0_RATE_1_5 ||
+	    link_rate == MPI_SAS_IOUNIT0_RATE_3_0) {
+
+		if (!port_info) {
+			if (ioc->old_sas_discovery_protocal) {
+				port_info = mptsas_expander_add(ioc,
+					le16_to_cpu(link_data->DevHandle));
+				if (port_info)
+					goto out;
+			}
+			goto out;
+		}
+
+		if (port_info == ioc->hba_port_info)
+			mptsas_probe_hba_phys(ioc);
+		else
+			mptsas_expander_refresh(ioc, port_info);
+	} else if (phy_info && phy_info->phy) {
+		if (link_rate ==  MPI_SAS_IOUNIT0_RATE_PHY_DISABLED)
+			phy_info->phy->negotiated_linkrate =
+			    SAS_PHY_DISABLED;
+		else if (link_rate ==
+		    MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION)
+			phy_info->phy->negotiated_linkrate =
+			    SAS_LINK_RATE_FAILED;
+		else
+			phy_info->phy->negotiated_linkrate =
+			    SAS_LINK_RATE_UNKNOWN;
+	}
+ out:
+	mptsas_free_fw_event(ioc, fw_event);
+}
+
+static void
+mptsas_not_responding_devices(MPT_ADAPTER *ioc)
+{
+	struct mptsas_portinfo buffer, *port_info;
+	struct mptsas_device_info	*sas_info;
+	struct mptsas_devinfo sas_device;
+	u32	handle;
+	VirtTarget *vtarget = NULL;
+	struct mptsas_phyinfo *phy_info;
+	u8 found_expander;
+	int retval, retry_count;
+	unsigned long flags;
+
+	mpt_findImVolumes(ioc);
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		   "%s: exiting due to a parallel reset \n", ioc->name,
+		    __func__));
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+	/* devices, logical volumes */
+	mutex_lock(&ioc->sas_device_info_mutex);
+ redo_device_scan:
+	list_for_each_entry(sas_info, &ioc->sas_device_info_list, list) {
+		if (sas_info->is_cached)
+			continue;
+		if (!sas_info->is_logical_volume) {
+			sas_device.handle = 0;
+			retry_count = 0;
+retry_page:
+			retval = mptsas_sas_device_pg0(ioc, &sas_device,
+				(MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID
+				<< MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+				(sas_info->fw.channel << 8) +
+				sas_info->fw.id);
+
+			if (sas_device.handle)
+				continue;
+			if (retval == -EBUSY) {
+				spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+				if (ioc->ioc_reset_in_progress) {
+					dfailprintk(ioc,
+					printk(MYIOC_s_DEBUG_FMT
+					"%s: exiting due to reset\n",
+					ioc->name, __func__));
+					spin_unlock_irqrestore
+					(&ioc->taskmgmt_lock, flags);
+					mutex_unlock(&ioc->
+					sas_device_info_mutex);
+					return;
+				}
+				spin_unlock_irqrestore(&ioc->taskmgmt_lock,
+				flags);
+			}
+
+			if (retval && (retval != -ENODEV)) {
+				if (retry_count < 10) {
+					retry_count++;
+					goto retry_page;
+				} else {
+					devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+					"%s: Config page retry exceeded retry "
+					"count deleting device 0x%llx\n",
+					ioc->name, __func__,
+					sas_info->sas_address));
+				}
+			}
+
+			/* delete device */
+			vtarget = mptsas_find_vtarget(ioc,
+				sas_info->fw.channel, sas_info->fw.id);
+
+			if (vtarget)
+				vtarget->deleted = 1;
+
+			phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+					sas_info->sas_address);
+
+			if (phy_info) {
+				mptsas_del_end_device(ioc, phy_info);
+				goto redo_device_scan;
+			}
+		} else
+			mptsas_volume_delete(ioc, sas_info->fw.id);
+	}
+	mutex_lock(&ioc->sas_device_info_mutex);
+
+	/* expanders */
+	mutex_lock(&ioc->sas_topology_mutex);
+ redo_expander_scan:
+	list_for_each_entry(port_info, &ioc->sas_topology, list) {
+
+		if (port_info->phy_info &&
+		    (!(port_info->phy_info[0].identify.device_info &
+		    MPI_SAS_DEVICE_INFO_SMP_TARGET)))
+			continue;
+		found_expander = 0;
+		handle = 0xFFFF;
+		while (!mptsas_sas_expander_pg0(ioc, &buffer,
+		    (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
+		     MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle) &&
+		    !found_expander) {
+
+			handle = buffer.phy_info[0].handle;
+			if (buffer.phy_info[0].identify.sas_address ==
+			    port_info->phy_info[0].identify.sas_address) {
+				found_expander = 1;
+			}
+			kfree(buffer.phy_info);
+		}
+
+		if (!found_expander) {
+			mptsas_expander_delete(ioc, port_info, 0);
+			goto redo_expander_scan;
+		}
+	}
+	mutex_lock(&ioc->sas_topology_mutex);
+}
+
+/**
+ *	mptsas_probe_expanders - adding expanders
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+static void
+mptsas_probe_expanders(MPT_ADAPTER *ioc)
+{
+	struct mptsas_portinfo buffer, *port_info;
+	u32 			handle;
+	int i;
+
+	handle = 0xFFFF;
+	while (!mptsas_sas_expander_pg0(ioc, &buffer,
+	    (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
+	     MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle)) {
+
+		handle = buffer.phy_info[0].handle;
+		port_info = mptsas_find_portinfo_by_sas_address(ioc,
+		    buffer.phy_info[0].identify.sas_address);
+
+		if (port_info) {
+			/* refreshing handles */
+			for (i = 0; i < buffer.num_phys; i++) {
+				port_info->phy_info[i].handle = handle;
+				port_info->phy_info[i].identify.handle_parent =
+				    buffer.phy_info[0].identify.handle_parent;
+			}
+			mptsas_expander_refresh(ioc, port_info);
+			kfree(buffer.phy_info);
+			continue;
+		}
+
+		port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL);
+		if (!port_info) {
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: exit at line=%d\n", ioc->name,
+			__func__, __LINE__));
+			return;
+		}
+		port_info->num_phys = buffer.num_phys;
+		port_info->phy_info = buffer.phy_info;
+		for (i = 0; i < port_info->num_phys; i++)
+			port_info->phy_info[i].portinfo = port_info;
+		mutex_lock(&ioc->sas_topology_mutex);
+		list_add_tail(&port_info->list, &ioc->sas_topology);
+		mutex_unlock(&ioc->sas_topology_mutex);
+		printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
+		    "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+	    (unsigned long long)buffer.phy_info[0].identify.sas_address);
+		mptsas_expander_refresh(ioc, port_info);
+	}
+}
+
+static void
+mptsas_probe_devices(MPT_ADAPTER *ioc)
+{
+	u16 handle;
+	struct mptsas_devinfo sas_device;
+	struct mptsas_phyinfo *phy_info;
+
+	handle = 0xFFFF;
+	while (!(mptsas_sas_device_pg0(ioc, &sas_device,
+	    MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+
+		handle = sas_device.handle;
+
+		if ((sas_device.device_info &
+		     (MPI_SAS_DEVICE_INFO_SSP_TARGET |
+		      MPI_SAS_DEVICE_INFO_STP_TARGET |
+		      MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0)
+			continue;
+
+		phy_info = mptsas_refreshing_device_handles(ioc, &sas_device);
+		if (!phy_info)
+			continue;
+
+		if (mptsas_get_rphy(phy_info))
+			continue;
+
+		mptsas_add_end_device(ioc, phy_info);
+	}
+}
+
+/**
+ *	mptsas_scan_sas_topology -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@sas_address:
+ *
+ **/
+static void
 mptsas_scan_sas_topology(MPT_ADAPTER *ioc)
 {
-	u32 handle = 0xFFFF;
+	struct scsi_device *sdev;
 	int i;
 
-	mutex_lock(&ioc->sas_discovery_mutex);
 	mptsas_probe_hba_phys(ioc);
-	while (!mptsas_probe_expander_phys(ioc, &handle))
-		;
+	mptsas_probe_expanders(ioc);
+	mptsas_probe_devices(ioc);
+
 	/*
 	  Reporting RAID volumes.
 	*/
-	if (!ioc->ir_firmware)
-		goto out;
-	if (!ioc->raid_data.pIocPg2)
-		goto out;
-	if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
-		goto out;
+	if (!ioc->ir_firmware || !ioc->raid_data.pIocPg2 ||
+	    !ioc->raid_data.pIocPg2->NumActiveVolumes)
+		return;
 	for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+		sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
+		    ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
+		if (sdev) {
+			scsi_device_put(sdev);
+			continue;
+		}
+		printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
+		    "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+		    ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID);
 		scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL,
 		    ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
 	}
+}
+
+
+static void
+mptsas_handle_queue_full_event(struct fw_event_work *fw_event)
+{
+	MPT_ADAPTER *ioc;
+	EventDataQueueFull_t *qfull_data;
+	struct mptsas_device_info *sas_info;
+	struct scsi_device	*sdev;
+	int depth;
+	int id = -1;
+	int channel = -1;
+	int fw_id, fw_channel;
+	u16 current_depth;
+
+
+	ioc = fw_event->ioc;
+	qfull_data = (EventDataQueueFull_t *)fw_event->event_data;
+	fw_id = qfull_data->TargetID;
+	fw_channel = qfull_data->Bus;
+	current_depth = le16_to_cpu(qfull_data->CurrentDepth);
+
+	/* if hidden raid component, look for the volume id */
+	mutex_lock(&ioc->sas_device_info_mutex);
+	if (mptscsih_is_phys_disk(ioc, fw_channel, fw_id)) {
+		list_for_each_entry(sas_info, &ioc->sas_device_info_list,
+		    list) {
+			if (sas_info->is_cached ||
+			    sas_info->is_logical_volume)
+				continue;
+			if (sas_info->is_hidden_raid_component &&
+			    (sas_info->fw.channel == fw_channel &&
+			    sas_info->fw.id == fw_id)) {
+				id = sas_info->volume_id;
+				channel = MPTSAS_RAID_CHANNEL;
+				goto out;
+			}
+		}
+	} else {
+		list_for_each_entry(sas_info, &ioc->sas_device_info_list,
+		    list) {
+			if (sas_info->is_cached ||
+			    sas_info->is_hidden_raid_component ||
+			    sas_info->is_logical_volume)
+				continue;
+			if (sas_info->fw.channel == fw_channel &&
+			    sas_info->fw.id == fw_id) {
+				id = sas_info->os.id;
+				channel = sas_info->os.channel;
+				goto out;
+			}
+		}
+
+	}
+
  out:
-	mutex_unlock(&ioc->sas_discovery_mutex);
+	mutex_unlock(&ioc->sas_device_info_mutex);
+
+	if (id != -1) {
+		shost_for_each_device(sdev, ioc->sh) {
+			if (sdev->id == id && sdev->channel == channel) {
+				if (current_depth > sdev->queue_depth) {
+					sdev_printk(KERN_INFO, sdev,
+					    "strange observation, the queue "
+					    "depth is (%d) meanwhile fw queue "
+					    "depth (%d)\n", sdev->queue_depth,
+					    current_depth);
+					continue;
+				}
+				depth = scsi_track_queue_full(sdev,
+				    current_depth - 1);
+				if (depth > 0)
+					sdev_printk(KERN_INFO, sdev,
+					"Queue depth reduced to (%d)\n",
+					   depth);
+				else if (depth < 0)
+					sdev_printk(KERN_INFO, sdev,
+					"Tagged Command Queueing is being "
+					"disabled\n");
+				else if (depth == 0)
+					sdev_printk(KERN_INFO, sdev,
+					"Queue depth not changed yet\n");
+			}
+		}
+	}
+
+	mptsas_free_fw_event(ioc, fw_event);
 }
 
-/*
- * Work queue thread to handle Runtime discovery
- * Mere purpose is the hot add/delete of expanders
- *(Mutex UNLOCKED)
- */
-static void
-__mptsas_discovery_work(MPT_ADAPTER *ioc)
-{
-	u32 handle = 0xFFFF;
-
-	ioc->sas_discovery_runtime=1;
-	mptsas_delete_expander_phys(ioc);
-	mptsas_probe_hba_phys(ioc);
-	while (!mptsas_probe_expander_phys(ioc, &handle))
-		;
-	ioc->sas_discovery_runtime=0;
-}
-
-/*
- * Work queue thread to handle Runtime discovery
- * Mere purpose is the hot add/delete of expanders
- *(Mutex LOCKED)
- */
-static void
-mptsas_discovery_work(struct work_struct *work)
-{
-	struct mptsas_discovery_event *ev =
-		container_of(work, struct mptsas_discovery_event, work);
-	MPT_ADAPTER *ioc = ev->ioc;
-
-	mutex_lock(&ioc->sas_discovery_mutex);
-	__mptsas_discovery_work(ioc);
-	mutex_unlock(&ioc->sas_discovery_mutex);
-	kfree(ev);
-}
 
 static struct mptsas_phyinfo *
 mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
@@ -2429,69 +3786,80 @@
 	return phy_info;
 }
 
+/**
+ *	mptsas_find_phyinfo_by_phys_disk_num -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@phys_disk_num:
+ *	@channel:
+ *	@id:
+ *
+ **/
 static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u8 channel, u8 id)
+mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 phys_disk_num,
+	u8 channel, u8 id)
 {
-	struct mptsas_portinfo *port_info;
 	struct mptsas_phyinfo *phy_info = NULL;
+	struct mptsas_portinfo *port_info;
+	RaidPhysDiskPage1_t *phys_disk = NULL;
+	int num_paths;
+	u64 sas_address = 0;
 	int i;
 
-	mutex_lock(&ioc->sas_topology_mutex);
-	list_for_each_entry(port_info, &ioc->sas_topology, list) {
-		for (i = 0; i < port_info->num_phys; i++) {
-			if (!mptsas_is_end_device(
-				&port_info->phy_info[i].attached))
-				continue;
-			if (port_info->phy_info[i].attached.id != id)
-				continue;
-			if (port_info->phy_info[i].attached.channel != channel)
-				continue;
-			phy_info = &port_info->phy_info[i];
-			break;
+	phy_info = NULL;
+	if (!ioc->raid_data.pIocPg3)
+		return NULL;
+	/* dual port support */
+	num_paths = mpt_raid_phys_disk_get_num_paths(ioc, phys_disk_num);
+	if (!num_paths)
+		goto out;
+	phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+	   (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+	if (!phys_disk)
+		goto out;
+	mpt_raid_phys_disk_pg1(ioc, phys_disk_num, phys_disk);
+	for (i = 0; i < num_paths; i++) {
+		if ((phys_disk->Path[i].Flags & 1) != 0)
+			/* entry no longer valid */
+			continue;
+		if ((id == phys_disk->Path[i].PhysDiskID) &&
+		    (channel == phys_disk->Path[i].PhysDiskBus)) {
+			memcpy(&sas_address, &phys_disk->Path[i].WWID,
+				sizeof(u64));
+			phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+					sas_address);
+			goto out;
 		}
 	}
-	mutex_unlock(&ioc->sas_topology_mutex);
-	return phy_info;
-}
 
-static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
-{
-	struct mptsas_portinfo *port_info;
-	struct mptsas_phyinfo *phy_info = NULL;
-	int i;
+ out:
+	kfree(phys_disk);
+	if (phy_info)
+		return phy_info;
 
+	/*
+	 * Extra code to handle RAID0 case, where the sas_address is not updated
+	 * in phys_disk_page_1 when hotswapped
+	 */
 	mutex_lock(&ioc->sas_topology_mutex);
 	list_for_each_entry(port_info, &ioc->sas_topology, list) {
-		for (i = 0; i < port_info->num_phys; i++) {
+		for (i = 0; i < port_info->num_phys && !phy_info; i++) {
 			if (!mptsas_is_end_device(
 				&port_info->phy_info[i].attached))
 				continue;
 			if (port_info->phy_info[i].attached.phys_disk_num == ~0)
 				continue;
-			if (port_info->phy_info[i].attached.phys_disk_num != id)
-				continue;
-			if (port_info->phy_info[i].attached.channel != channel)
-				continue;
-			phy_info = &port_info->phy_info[i];
-			break;
+			if ((port_info->phy_info[i].attached.phys_disk_num ==
+			    phys_disk_num) &&
+			    (port_info->phy_info[i].attached.id == id) &&
+			    (port_info->phy_info[i].attached.channel ==
+			     channel))
+				phy_info = &port_info->phy_info[i];
 		}
 	}
 	mutex_unlock(&ioc->sas_topology_mutex);
 	return phy_info;
 }
 
-/*
- * Work queue thread to clear the persitency table
- */
-static void
-mptsas_persist_clear_table(struct work_struct *work)
-{
-	MPT_ADAPTER *ioc = container_of(work, MPT_ADAPTER, sas_persist_task);
-
-	mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
-}
-
 static void
 mptsas_reprobe_lun(struct scsi_device *sdev, void *data)
 {
@@ -2517,7 +3885,8 @@
 	pRaidVolumePage0_t		buffer = NULL;
 	RaidPhysDiskPage0_t 		phys_disk;
 	int				i;
-	struct mptsas_hotplug_event 	*ev;
+	struct mptsas_phyinfo	*phy_info;
+	struct mptsas_devinfo		sas_device;
 
 	memset(&cfg, 0 , sizeof(CONFIGPARMS));
 	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
@@ -2557,20 +3926,16 @@
 		    buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
 			continue;
 
-		ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-		if (!ev) {
-			printk(MYIOC_s_WARN_FMT "mptsas: lost hotplug event\n", ioc->name);
-			goto out;
-		}
+		if (mptsas_sas_device_pg0(ioc, &sas_device,
+		    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+		     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+			(phys_disk.PhysDiskBus << 8) +
+			phys_disk.PhysDiskID))
+			continue;
 
-		INIT_WORK(&ev->work, mptsas_hotplug_work);
-		ev->ioc = ioc;
-		ev->id = phys_disk.PhysDiskID;
-		ev->channel = phys_disk.PhysDiskBus;
-		ev->phys_disk_num_valid = 1;
-		ev->phys_disk_num = phys_disk.PhysDiskNum;
-		ev->event_type = MPTSAS_ADD_DEVICE;
-		schedule_work(&ev->work);
+		phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+		    sas_device.sas_address);
+		mptsas_add_end_device(ioc, phy_info);
 	}
 
  out:
@@ -2582,417 +3947,386 @@
  * Work queue thread to handle SAS hotplug events
  */
 static void
-mptsas_hotplug_work(struct work_struct *work)
+mptsas_hotplug_work(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+    struct mptsas_hotplug_event *hot_plug_info)
 {
-	struct mptsas_hotplug_event *ev =
-		container_of(work, struct mptsas_hotplug_event, work);
-
-	MPT_ADAPTER *ioc = ev->ioc;
 	struct mptsas_phyinfo *phy_info;
-	struct sas_rphy *rphy;
-	struct sas_port *port;
-	struct scsi_device *sdev;
 	struct scsi_target * starget;
-	struct sas_identify identify;
-	char *ds = NULL;
 	struct mptsas_devinfo sas_device;
 	VirtTarget *vtarget;
-	VirtDevice *vdevice;
+	int i;
 
-	mutex_lock(&ioc->sas_discovery_mutex);
-	switch (ev->event_type) {
-	case MPTSAS_DEL_DEVICE:
+	switch (hot_plug_info->event_type) {
 
-		phy_info = NULL;
-		if (ev->phys_disk_num_valid) {
-			if (ev->hidden_raid_component){
-				if (mptsas_sas_device_pg0(ioc, &sas_device,
-				    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
-				     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-				    (ev->channel << 8) + ev->id)) {
-					dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-					"%s: exit at line=%d\n", ioc->name,
-						__func__, __LINE__));
-					break;
-				}
-				phy_info = mptsas_find_phyinfo_by_sas_address(
-				    ioc, sas_device.sas_address);
-			}else
-				phy_info = mptsas_find_phyinfo_by_phys_disk_num(
-				    ioc, ev->channel, ev->phys_disk_num);
-		}
+	case MPTSAS_ADD_PHYSDISK:
 
-		if (!phy_info)
-			phy_info = mptsas_find_phyinfo_by_target(ioc,
-			    ev->channel, ev->id);
-
-		/*
-		 * Sanity checks, for non-existing phys and remote rphys.
-		 */
-		if (!phy_info){
-			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-				__func__, __LINE__));
+		if (!ioc->raid_data.pIocPg2)
 			break;
-		}
-		if (!phy_info->port_details) {
-			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
-			break;
-		}
-		rphy = mptsas_get_rphy(phy_info);
-		if (!rphy) {
-			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
-			break;
-		}
 
-		port = mptsas_get_port(phy_info);
-		if (!port) {
-			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
-			break;
-		}
-
-		starget = mptsas_get_starget(phy_info);
-		if (starget) {
-			vtarget = starget->hostdata;
-
-			if (!vtarget) {
-				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-					"%s: exit at line=%d\n", ioc->name,
-					__func__, __LINE__));
-				break;
-			}
-
-			/*
-			 * Handling  RAID components
-			 */
-			if (ev->phys_disk_num_valid &&
-			    ev->hidden_raid_component) {
-				printk(MYIOC_s_INFO_FMT
-				    "RAID Hidding: channel=%d, id=%d, "
-				    "physdsk %d \n", ioc->name, ev->channel,
-				    ev->id, ev->phys_disk_num);
-				vtarget->id = ev->phys_disk_num;
-				vtarget->tflags |=
-				    MPT_TARGET_FLAGS_RAID_COMPONENT;
-				mptsas_reprobe_target(starget, 1);
-				phy_info->attached.phys_disk_num =
-				    ev->phys_disk_num;
-			break;
+		for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+			if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID ==
+			    hot_plug_info->id) {
+				printk(MYIOC_s_WARN_FMT "firmware bug: unable "
+				    "to add hidden disk - target_id matchs "
+				    "volume_id\n", ioc->name);
+				mptsas_free_fw_event(ioc, fw_event);
+				return;
 			}
 		}
+		mpt_findImVolumes(ioc);
 
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_SSP_TARGET)
-			ds = "ssp";
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_STP_TARGET)
-			ds = "stp";
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_SATA_DEVICE)
-			ds = "sata";
-
-		printk(MYIOC_s_INFO_FMT
-		       "removing %s device, channel %d, id %d, phy %d\n",
-		       ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
-		dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT
-		    "delete port (%d)\n", ioc->name, port->port_identifier);
-		sas_port_delete(port);
-		mptsas_port_delete(ioc, phy_info->port_details);
-		break;
 	case MPTSAS_ADD_DEVICE:
+		memset(&sas_device, 0, sizeof(struct mptsas_devinfo));
+		mptsas_sas_device_pg0(ioc, &sas_device,
+		    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+		    MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+		    (hot_plug_info->channel << 8) +
+		    hot_plug_info->id);
 
-		if (ev->phys_disk_num_valid)
-			mpt_findImVolumes(ioc);
+		if (!sas_device.handle)
+			return;
 
-		/*
-		 * Refresh sas device pg0 data
-		 */
+		phy_info = mptsas_refreshing_device_handles(ioc, &sas_device);
+		if (!phy_info)
+			break;
+
+		if (mptsas_get_rphy(phy_info))
+			break;
+
+		mptsas_add_end_device(ioc, phy_info);
+		break;
+
+	case MPTSAS_DEL_DEVICE:
+		phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+		    hot_plug_info->sas_address);
+		mptsas_del_end_device(ioc, phy_info);
+		break;
+
+	case MPTSAS_DEL_PHYSDISK:
+
+		mpt_findImVolumes(ioc);
+
+		phy_info = mptsas_find_phyinfo_by_phys_disk_num(
+				ioc, hot_plug_info->phys_disk_num,
+				hot_plug_info->channel,
+				hot_plug_info->id);
+		mptsas_del_end_device(ioc, phy_info);
+		break;
+
+	case MPTSAS_ADD_PHYSDISK_REPROBE:
+
 		if (mptsas_sas_device_pg0(ioc, &sas_device,
 		    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
 		     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-			(ev->channel << 8) + ev->id)) {
-				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-					"%s: exit at line=%d\n", ioc->name,
-					__func__, __LINE__));
+		    (hot_plug_info->channel << 8) + hot_plug_info->id)) {
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+				 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		__mptsas_discovery_work(ioc);
+		phy_info = mptsas_find_phyinfo_by_sas_address(
+		    ioc, sas_device.sas_address);
 
-		phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
-				sas_device.sas_address);
-
-		if (!phy_info || !phy_info->port_details) {
+		if (!phy_info) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
+				"%s: fw_id=%d exit at line=%d\n", ioc->name,
+				 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
 		starget = mptsas_get_starget(phy_info);
-		if (starget && (!ev->hidden_raid_component)){
+		if (!starget) {
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+				"%s: fw_id=%d exit at line=%d\n", ioc->name,
+				 __func__, hot_plug_info->id, __LINE__));
+			break;
+		}
 
-			vtarget = starget->hostdata;
+		vtarget = starget->hostdata;
+		if (!vtarget) {
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+				"%s: fw_id=%d exit at line=%d\n", ioc->name,
+				 __func__, hot_plug_info->id, __LINE__));
+			break;
+		}
 
-			if (!vtarget) {
+		mpt_findImVolumes(ioc);
+
+		starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Hidding: "
+		    "fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n",
+		    ioc->name, hot_plug_info->channel, hot_plug_info->id,
+		    hot_plug_info->phys_disk_num, (unsigned long long)
+		    sas_device.sas_address);
+
+		vtarget->id = hot_plug_info->phys_disk_num;
+		vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
+		phy_info->attached.phys_disk_num = hot_plug_info->phys_disk_num;
+		mptsas_reprobe_target(starget, 1);
+		break;
+
+	case MPTSAS_DEL_PHYSDISK_REPROBE:
+
+		if (mptsas_sas_device_pg0(ioc, &sas_device,
+		    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+		     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+			(hot_plug_info->channel << 8) + hot_plug_info->id)) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				    "%s: exit at line=%d\n", ioc->name,
-				    __func__, __LINE__));
-				break;
-			}
-			/*
-			 * Handling  RAID components
-			 */
-			if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
-				printk(MYIOC_s_INFO_FMT
-				    "RAID Exposing: channel=%d, id=%d, "
-				    "physdsk %d \n", ioc->name, ev->channel,
-				    ev->id, ev->phys_disk_num);
-				vtarget->tflags &=
-				    ~MPT_TARGET_FLAGS_RAID_COMPONENT;
-				vtarget->id = ev->id;
-				mptsas_reprobe_target(starget, 0);
-				phy_info->attached.phys_disk_num = ~0;
-			}
+				    "%s: fw_id=%d exit at line=%d\n",
+				    ioc->name, __func__,
+				    hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		if (mptsas_get_rphy(phy_info)) {
+		phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+				sas_device.sas_address);
+		if (!phy_info) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
-			if (ev->channel) printk("%d\n", __LINE__);
+			    "%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		port = mptsas_get_port(phy_info);
-		if (!port) {
+		starget = mptsas_get_starget(phy_info);
+		if (!starget) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
+			    "%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
-		memcpy(&phy_info->attached, &sas_device,
-		    sizeof(struct mptsas_devinfo));
 
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_SSP_TARGET)
-			ds = "ssp";
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_STP_TARGET)
-			ds = "stp";
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_SATA_DEVICE)
-			ds = "sata";
-
-		printk(MYIOC_s_INFO_FMT
-		       "attaching %s device, channel %d, id %d, phy %d\n",
-		       ioc->name, ds, ev->channel, ev->id, ev->phy_id);
-
-		mptsas_parse_device_info(&identify, &phy_info->attached);
-		rphy = sas_end_device_alloc(port);
-		if (!rphy) {
+		vtarget = starget->hostdata;
+		if (!vtarget) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
-			break; /* non-fatal: an rphy can be added later */
-		}
-
-		rphy->identify = identify;
-		if (sas_rphy_add(rphy)) {
-			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
-			sas_rphy_free(rphy);
+			    "%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
-		mptsas_set_rphy(ioc, phy_info, rphy);
+
+		if (!(vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)) {
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			    "%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, hot_plug_info->id, __LINE__));
+			break;
+		}
+
+		mpt_findImVolumes(ioc);
+
+		starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Exposing:"
+		    " fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n",
+		    ioc->name, hot_plug_info->channel, hot_plug_info->id,
+		    hot_plug_info->phys_disk_num, (unsigned long long)
+		    sas_device.sas_address);
+
+		vtarget->tflags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT;
+		vtarget->id = hot_plug_info->id;
+		phy_info->attached.phys_disk_num = ~0;
+		mptsas_reprobe_target(starget, 0);
+		mptsas_add_device_component_by_fw(ioc,
+		    hot_plug_info->channel, hot_plug_info->id);
 		break;
+
 	case MPTSAS_ADD_RAID:
-		sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
-		    ev->id, 0);
-		if (sdev) {
-			scsi_device_put(sdev);
-			break;
-		}
-		printk(MYIOC_s_INFO_FMT
-		       "attaching raid volume, channel %d, id %d\n",
-		       ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
-		scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, ev->id, 0);
+
 		mpt_findImVolumes(ioc);
+		printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
+		    "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+		    hot_plug_info->id);
+		scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL,
+		    hot_plug_info->id, 0);
 		break;
+
 	case MPTSAS_DEL_RAID:
-		sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
-		    ev->id, 0);
-		if (!sdev)
-			break;
-		printk(MYIOC_s_INFO_FMT
-		       "removing raid volume, channel %d, id %d\n",
-		       ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
-		vdevice = sdev->hostdata;
-		scsi_remove_device(sdev);
-		scsi_device_put(sdev);
+
 		mpt_findImVolumes(ioc);
+		printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
+		    "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+		    hot_plug_info->id);
+		scsi_remove_device(hot_plug_info->sdev);
+		scsi_device_put(hot_plug_info->sdev);
 		break;
+
 	case MPTSAS_ADD_INACTIVE_VOLUME:
+
+		mpt_findImVolumes(ioc);
 		mptsas_adding_inactive_raid_components(ioc,
-		    ev->channel, ev->id);
+		    hot_plug_info->channel, hot_plug_info->id);
 		break;
-	case MPTSAS_IGNORE_EVENT:
+
 	default:
 		break;
 	}
 
-	mutex_unlock(&ioc->sas_discovery_mutex);
-	kfree(ev);
+	mptsas_free_fw_event(ioc, fw_event);
 }
 
 static void
-mptsas_send_sas_event(MPT_ADAPTER *ioc,
-		EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
+mptsas_send_sas_event(struct fw_event_work *fw_event)
 {
-	struct mptsas_hotplug_event *ev;
-	u32 device_info = le32_to_cpu(sas_event_data->DeviceInfo);
-	__le64 sas_address;
+	MPT_ADAPTER *ioc;
+	struct mptsas_hotplug_event hot_plug_info;
+	EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
+	u32 device_info;
+	u64 sas_address;
+
+	ioc = fw_event->ioc;
+	sas_event_data = (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)
+	    fw_event->event_data;
+	device_info = le32_to_cpu(sas_event_data->DeviceInfo);
 
 	if ((device_info &
-	     (MPI_SAS_DEVICE_INFO_SSP_TARGET |
-	      MPI_SAS_DEVICE_INFO_STP_TARGET |
-	      MPI_SAS_DEVICE_INFO_SATA_DEVICE )) == 0)
+		(MPI_SAS_DEVICE_INFO_SSP_TARGET |
+		MPI_SAS_DEVICE_INFO_STP_TARGET |
+		MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0) {
+		mptsas_free_fw_event(ioc, fw_event);
 		return;
+	}
+
+	if (sas_event_data->ReasonCode ==
+		MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED) {
+		mptbase_sas_persist_operation(ioc,
+		MPI_SAS_OP_CLEAR_NOT_PRESENT);
+		mptsas_free_fw_event(ioc, fw_event);
+		return;
+	}
 
 	switch (sas_event_data->ReasonCode) {
 	case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
-
-		mptsas_target_reset_queue(ioc, sas_event_data);
-		break;
-
 	case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
-		ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-		if (!ev) {
-			printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
-			break;
-		}
-
-		INIT_WORK(&ev->work, mptsas_hotplug_work);
-		ev->ioc = ioc;
-		ev->handle = le16_to_cpu(sas_event_data->DevHandle);
-		ev->parent_handle =
-		    le16_to_cpu(sas_event_data->ParentDevHandle);
-		ev->channel = sas_event_data->Bus;
-		ev->id = sas_event_data->TargetID;
-		ev->phy_id = sas_event_data->PhyNum;
+		memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+		hot_plug_info.handle = le16_to_cpu(sas_event_data->DevHandle);
+		hot_plug_info.channel = sas_event_data->Bus;
+		hot_plug_info.id = sas_event_data->TargetID;
+		hot_plug_info.phy_id = sas_event_data->PhyNum;
 		memcpy(&sas_address, &sas_event_data->SASAddress,
-		    sizeof(__le64));
-		ev->sas_address = le64_to_cpu(sas_address);
-		ev->device_info = device_info;
-
+		    sizeof(u64));
+		hot_plug_info.sas_address = le64_to_cpu(sas_address);
+		hot_plug_info.device_info = device_info;
 		if (sas_event_data->ReasonCode &
 		    MPI_EVENT_SAS_DEV_STAT_RC_ADDED)
-			ev->event_type = MPTSAS_ADD_DEVICE;
+			hot_plug_info.event_type = MPTSAS_ADD_DEVICE;
 		else
-			ev->event_type = MPTSAS_DEL_DEVICE;
-		schedule_work(&ev->work);
+			hot_plug_info.event_type = MPTSAS_DEL_DEVICE;
+		mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
 		break;
+
 	case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
-	/*
-	 * Persistent table is full.
-	 */
-		INIT_WORK(&ioc->sas_persist_task,
-		    mptsas_persist_clear_table);
-		schedule_work(&ioc->sas_persist_task);
+		mptbase_sas_persist_operation(ioc,
+		    MPI_SAS_OP_CLEAR_NOT_PRESENT);
+		mptsas_free_fw_event(ioc, fw_event);
 		break;
-	/*
-	 * TODO, handle other events
-	 */
+
 	case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
-	case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+	/* TODO */
 	case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
-	case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
-	case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
-	case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
-	case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
+	/* TODO */
 	default:
+		mptsas_free_fw_event(ioc, fw_event);
 		break;
 	}
 }
+
 static void
-mptsas_send_raid_event(MPT_ADAPTER *ioc,
-		EVENT_DATA_RAID *raid_event_data)
+mptsas_send_raid_event(struct fw_event_work *fw_event)
 {
-	struct mptsas_hotplug_event *ev;
-	int status = le32_to_cpu(raid_event_data->SettingsStatus);
-	int state = (status >> 8) & 0xff;
+	MPT_ADAPTER *ioc;
+	EVENT_DATA_RAID *raid_event_data;
+	struct mptsas_hotplug_event hot_plug_info;
+	int status;
+	int state;
+	struct scsi_device *sdev = NULL;
+	VirtDevice *vdevice = NULL;
+	RaidPhysDiskPage0_t phys_disk;
 
-	if (ioc->bus_type != SAS)
-		return;
+	ioc = fw_event->ioc;
+	raid_event_data = (EVENT_DATA_RAID *)fw_event->event_data;
+	status = le32_to_cpu(raid_event_data->SettingsStatus);
+	state = (status >> 8) & 0xff;
 
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev) {
-		printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
-		return;
+	memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+	hot_plug_info.id = raid_event_data->VolumeID;
+	hot_plug_info.channel = raid_event_data->VolumeBus;
+	hot_plug_info.phys_disk_num = raid_event_data->PhysDiskNum;
+
+	if (raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_DELETED ||
+	    raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_CREATED ||
+	    raid_event_data->ReasonCode ==
+	    MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED) {
+		sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
+		    hot_plug_info.id, 0);
+		hot_plug_info.sdev = sdev;
+		if (sdev)
+			vdevice = sdev->hostdata;
 	}
 
-	INIT_WORK(&ev->work, mptsas_hotplug_work);
-	ev->ioc = ioc;
-	ev->id = raid_event_data->VolumeID;
-	ev->channel = raid_event_data->VolumeBus;
-	ev->event_type = MPTSAS_IGNORE_EVENT;
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: "
+	    "ReasonCode=%02x\n", ioc->name, __func__,
+	    raid_event_data->ReasonCode));
 
 	switch (raid_event_data->ReasonCode) {
 	case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
-		ev->phys_disk_num_valid = 1;
-		ev->phys_disk_num = raid_event_data->PhysDiskNum;
-		ev->event_type = MPTSAS_ADD_DEVICE;
+		hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK_REPROBE;
 		break;
 	case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
-		ev->phys_disk_num_valid = 1;
-		ev->phys_disk_num = raid_event_data->PhysDiskNum;
-		ev->hidden_raid_component = 1;
-		ev->event_type = MPTSAS_DEL_DEVICE;
+		hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK_REPROBE;
 		break;
 	case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
 		switch (state) {
 		case MPI_PD_STATE_ONLINE:
 		case MPI_PD_STATE_NOT_COMPATIBLE:
-			ev->phys_disk_num_valid = 1;
-			ev->phys_disk_num = raid_event_data->PhysDiskNum;
-			ev->hidden_raid_component = 1;
-			ev->event_type = MPTSAS_ADD_DEVICE;
+			mpt_raid_phys_disk_pg0(ioc,
+			    raid_event_data->PhysDiskNum, &phys_disk);
+			hot_plug_info.id = phys_disk.PhysDiskID;
+			hot_plug_info.channel = phys_disk.PhysDiskBus;
+			hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK;
 			break;
+		case MPI_PD_STATE_FAILED:
 		case MPI_PD_STATE_MISSING:
 		case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST:
 		case MPI_PD_STATE_FAILED_AT_HOST_REQUEST:
 		case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON:
-			ev->phys_disk_num_valid = 1;
-			ev->phys_disk_num = raid_event_data->PhysDiskNum;
-			ev->event_type = MPTSAS_DEL_DEVICE;
+			hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK;
 			break;
 		default:
 			break;
 		}
 		break;
 	case MPI_EVENT_RAID_RC_VOLUME_DELETED:
-		ev->event_type = MPTSAS_DEL_RAID;
+		if (!sdev)
+			break;
+		vdevice->vtarget->deleted = 1; /* block IO */
+		hot_plug_info.event_type = MPTSAS_DEL_RAID;
 		break;
 	case MPI_EVENT_RAID_RC_VOLUME_CREATED:
-		ev->event_type = MPTSAS_ADD_RAID;
+		if (sdev) {
+			scsi_device_put(sdev);
+			break;
+		}
+		hot_plug_info.event_type = MPTSAS_ADD_RAID;
 		break;
 	case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
+		if (!(status & MPI_RAIDVOL0_STATUS_FLAG_ENABLED)) {
+			if (!sdev)
+				break;
+			vdevice->vtarget->deleted = 1; /* block IO */
+			hot_plug_info.event_type = MPTSAS_DEL_RAID;
+			break;
+		}
 		switch (state) {
 		case MPI_RAIDVOL0_STATUS_STATE_FAILED:
 		case MPI_RAIDVOL0_STATUS_STATE_MISSING:
-			ev->event_type = MPTSAS_DEL_RAID;
+			if (!sdev)
+				break;
+			vdevice->vtarget->deleted = 1; /* block IO */
+			hot_plug_info.event_type = MPTSAS_DEL_RAID;
 			break;
 		case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL:
 		case MPI_RAIDVOL0_STATUS_STATE_DEGRADED:
-			ev->event_type = MPTSAS_ADD_RAID;
+			if (sdev) {
+				scsi_device_put(sdev);
+				break;
+			}
+			hot_plug_info.event_type = MPTSAS_ADD_RAID;
 			break;
 		default:
 			break;
@@ -3001,32 +4335,188 @@
 	default:
 		break;
 	}
-	schedule_work(&ev->work);
+
+	if (hot_plug_info.event_type != MPTSAS_IGNORE_EVENT)
+		mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
+	else
+		mptsas_free_fw_event(ioc, fw_event);
 }
 
-static void
-mptsas_send_discovery_event(MPT_ADAPTER *ioc,
-	EVENT_DATA_SAS_DISCOVERY *discovery_data)
+/**
+ *	mptsas_issue_tm - send mptsas internal tm request
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@type: Task Management type
+ *	@channel: channel number for task management
+ *	@id: Logical Target ID for reset (if appropriate)
+ *	@lun: Logical unit for reset (if appropriate)
+ *	@task_context: Context for the task to be aborted
+ *	@timeout: timeout for task management control
+ *
+ *	return 0 on success and -1 on failure:
+ *
+ */
+static int
+mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun,
+	int task_context, ulong timeout, u8 *issue_reset)
 {
-	struct mptsas_discovery_event *ev;
+	MPT_FRAME_HDR	*mf;
+	SCSITaskMgmt_t	*pScsiTm;
+	int		 retval;
+	unsigned long	 timeleft;
 
-	/*
-	 * DiscoveryStatus
-	 *
-	 * This flag will be non-zero when firmware
-	 * kicks off discovery, and return to zero
-	 * once its completed.
-	 */
-	if (discovery_data->DiscoveryStatus)
-		return;
+	*issue_reset = 0;
+	mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc);
+	if (mf == NULL) {
+		retval = -1; /* return failure */
+		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "TaskMgmt request: no "
+		    "msg frames!!\n", ioc->name));
+		goto out;
+	}
 
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev)
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request: mr = %p, "
+	    "task_type = 0x%02X,\n\t timeout = %ld, fw_channel = %d, "
+	    "fw_id = %d, lun = %lld,\n\t task_context = 0x%x\n", ioc->name, mf,
+	     type, timeout, channel, id, (unsigned long long)lun,
+	     task_context));
+
+	pScsiTm = (SCSITaskMgmt_t *) mf;
+	memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t));
+	pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
+	pScsiTm->TaskType = type;
+	pScsiTm->MsgFlags = 0;
+	pScsiTm->TargetID = id;
+	pScsiTm->Bus = channel;
+	pScsiTm->ChainOffset = 0;
+	pScsiTm->Reserved = 0;
+	pScsiTm->Reserved1 = 0;
+	pScsiTm->TaskMsgContext = task_context;
+	int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);
+
+	INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+	retval = 0;
+	mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf);
+
+	/* Now wait for the command to complete */
+	timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
+	    timeout*HZ);
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		retval = -1; /* return failure */
+		dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
+		    "TaskMgmt request: TIMED OUT!(mr=%p)\n", ioc->name, mf));
+		mpt_free_msg_frame(ioc, mf);
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		*issue_reset = 1;
+		goto out;
+	}
+
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		retval = -1; /* return failure */
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "TaskMgmt request: failed with no reply\n", ioc->name));
+		goto out;
+	}
+
+ out:
+	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	return retval;
+}
+
+/**
+ *	mptsas_broadcast_primative_work - Handle broadcast primitives
+ *	@work: work queue payload containing info describing the event
+ *
+ *	this will be handled in workqueue context.
+ */
+static void
+mptsas_broadcast_primative_work(struct fw_event_work *fw_event)
+{
+	MPT_ADAPTER *ioc = fw_event->ioc;
+	MPT_FRAME_HDR	*mf;
+	VirtDevice	*vdevice;
+	int			ii;
+	struct scsi_cmnd	*sc;
+	SCSITaskMgmtReply_t	*pScsiTmReply;
+	u8			issue_reset;
+	int			task_context;
+	u8			channel, id;
+	int			 lun;
+	u32			 termination_count;
+	u32			 query_count;
+
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "%s - enter\n", ioc->name, __func__));
+
+	mutex_lock(&ioc->taskmgmt_cmds.mutex);
+	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+		mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+		mptsas_requeue_fw_event(ioc, fw_event, 1000);
 		return;
-	INIT_WORK(&ev->work, mptsas_discovery_work);
-	ev->ioc = ioc;
-	schedule_work(&ev->work);
-};
+	}
+
+	issue_reset = 0;
+	termination_count = 0;
+	query_count = 0;
+	mpt_findImVolumes(ioc);
+	pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply;
+
+	for (ii = 0; ii < ioc->req_depth; ii++) {
+		if (ioc->fw_events_off)
+			goto out;
+		sc = mptscsih_get_scsi_lookup(ioc, ii);
+		if (!sc)
+			continue;
+		mf = MPT_INDEX_2_MFPTR(ioc, ii);
+		if (!mf)
+			continue;
+		task_context = mf->u.frame.hwhdr.msgctxu.MsgContext;
+		vdevice = sc->device->hostdata;
+		if (!vdevice || !vdevice->vtarget)
+			continue;
+		if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
+			continue; /* skip hidden raid components */
+		if (vdevice->vtarget->raidVolume)
+			continue; /* skip hidden raid components */
+		channel = vdevice->vtarget->channel;
+		id = vdevice->vtarget->id;
+		lun = vdevice->lun;
+		if (mptsas_issue_tm(ioc, MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK,
+		    channel, id, (u64)lun, task_context, 30, &issue_reset))
+			goto out;
+		query_count++;
+		termination_count +=
+		    le32_to_cpu(pScsiTmReply->TerminationCount);
+		if ((pScsiTmReply->IOCStatus == MPI_IOCSTATUS_SUCCESS) &&
+		    (pScsiTmReply->ResponseCode ==
+		    MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
+		    pScsiTmReply->ResponseCode ==
+		    MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC))
+			continue;
+		if (mptsas_issue_tm(ioc,
+		    MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET,
+		    channel, id, (u64)lun, 0, 30, &issue_reset))
+			goto out;
+		termination_count +=
+		    le32_to_cpu(pScsiTmReply->TerminationCount);
+	}
+
+ out:
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "%s - exit, query_count = %d termination_count = %d\n",
+	    ioc->name, __func__, query_count, termination_count));
+
+	ioc->broadcast_aen_busy = 0;
+	mpt_clear_taskmgmt_in_progress_flag(ioc);
+	mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+
+	if (issue_reset) {
+		printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+		    ioc->name, __func__);
+		mpt_HardResetHandler(ioc, CAN_SLEEP);
+	}
+	mptsas_free_fw_event(ioc, fw_event);
+}
 
 /*
  * mptsas_send_ir2_event - handle exposing hidden disk when
@@ -3037,76 +4527,159 @@
  *
  */
 static void
-mptsas_send_ir2_event(MPT_ADAPTER *ioc, PTR_MPI_EVENT_DATA_IR2 ir2_data)
+mptsas_send_ir2_event(struct fw_event_work *fw_event)
 {
-	struct mptsas_hotplug_event *ev;
+	MPT_ADAPTER	*ioc;
+	struct mptsas_hotplug_event hot_plug_info;
+	MPI_EVENT_DATA_IR2	*ir2_data;
+	u8 reasonCode;
+	RaidPhysDiskPage0_t phys_disk;
 
-	if (ir2_data->ReasonCode !=
-	    MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED)
+	ioc = fw_event->ioc;
+	ir2_data = (MPI_EVENT_DATA_IR2 *)fw_event->event_data;
+	reasonCode = ir2_data->ReasonCode;
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: "
+	    "ReasonCode=%02x\n", ioc->name, __func__, reasonCode));
+
+	memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+	hot_plug_info.id = ir2_data->TargetID;
+	hot_plug_info.channel = ir2_data->Bus;
+	switch (reasonCode) {
+	case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
+		hot_plug_info.event_type = MPTSAS_ADD_INACTIVE_VOLUME;
+		break;
+	case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
+		hot_plug_info.phys_disk_num = ir2_data->PhysDiskNum;
+		hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK;
+		break;
+	case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
+		hot_plug_info.phys_disk_num = ir2_data->PhysDiskNum;
+		mpt_raid_phys_disk_pg0(ioc,
+		    ir2_data->PhysDiskNum, &phys_disk);
+		hot_plug_info.id = phys_disk.PhysDiskID;
+		hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK;
+		break;
+	default:
+		mptsas_free_fw_event(ioc, fw_event);
 		return;
-
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev)
-		return;
-
-	INIT_WORK(&ev->work, mptsas_hotplug_work);
-	ev->ioc = ioc;
-	ev->id = ir2_data->TargetID;
-	ev->channel = ir2_data->Bus;
-	ev->event_type = MPTSAS_ADD_INACTIVE_VOLUME;
-
-	schedule_work(&ev->work);
-};
+	}
+	mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
+}
 
 static int
 mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
 {
-	int rc=1;
-	u8 event = le32_to_cpu(reply->Event) & 0xFF;
+	u32 event = le32_to_cpu(reply->Event);
+	int sz, event_data_sz;
+	struct fw_event_work *fw_event;
+	unsigned long delay;
 
-	if (!ioc->sh)
-		goto out;
+	/* events turned off due to host reset or driver unloading */
+	if (ioc->fw_events_off)
+		return 0;
 
-	/*
-	 * sas_discovery_ignore_events
-	 *
-	 * This flag is to prevent anymore processing of
-	 * sas events once mptsas_remove function is called.
-	 */
-	if (ioc->sas_discovery_ignore_events) {
-		rc = mptscsih_event_process(ioc, reply);
-		goto out;
-	}
-
+	delay = msecs_to_jiffies(1);
 	switch (event) {
+	case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
+	{
+		EVENT_DATA_SAS_BROADCAST_PRIMITIVE *broadcast_event_data =
+		    (EVENT_DATA_SAS_BROADCAST_PRIMITIVE *)reply->Data;
+		if (broadcast_event_data->Primitive !=
+		    MPI_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT)
+			return 0;
+		if (ioc->broadcast_aen_busy)
+			return 0;
+		ioc->broadcast_aen_busy = 1;
+		break;
+	}
 	case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
-		mptsas_send_sas_event(ioc,
-			(EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data);
+	{
+		EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data =
+		    (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data;
+
+		if (sas_event_data->ReasonCode ==
+		    MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING) {
+			mptsas_target_reset_queue(ioc, sas_event_data);
+			return 0;
+		}
 		break;
+	}
+	case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+	{
+		MpiEventDataSasExpanderStatusChange_t *expander_data =
+		    (MpiEventDataSasExpanderStatusChange_t *)reply->Data;
+
+		if (ioc->old_sas_discovery_protocal)
+			return 0;
+
+		if (expander_data->ReasonCode ==
+		    MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING &&
+		    ioc->device_missing_delay)
+			delay = HZ * ioc->device_missing_delay;
+		break;
+	}
+	case MPI_EVENT_SAS_DISCOVERY:
+	{
+		u32 discovery_status;
+		EventDataSasDiscovery_t *discovery_data =
+		    (EventDataSasDiscovery_t *)reply->Data;
+
+		discovery_status = le32_to_cpu(discovery_data->DiscoveryStatus);
+		ioc->sas_discovery_quiesce_io = discovery_status ? 1 : 0;
+		if (ioc->old_sas_discovery_protocal && !discovery_status)
+			mptsas_queue_rescan(ioc);
+		return 0;
+	}
 	case MPI_EVENT_INTEGRATED_RAID:
-		mptsas_send_raid_event(ioc,
-			(EVENT_DATA_RAID *)reply->Data);
-		break;
 	case MPI_EVENT_PERSISTENT_TABLE_FULL:
-		INIT_WORK(&ioc->sas_persist_task,
-		    mptsas_persist_clear_table);
-		schedule_work(&ioc->sas_persist_task);
-		break;
-	 case MPI_EVENT_SAS_DISCOVERY:
-		mptsas_send_discovery_event(ioc,
-			(EVENT_DATA_SAS_DISCOVERY *)reply->Data);
-		break;
 	case MPI_EVENT_IR2:
-		mptsas_send_ir2_event(ioc,
-		    (PTR_MPI_EVENT_DATA_IR2)reply->Data);
+	case MPI_EVENT_SAS_PHY_LINK_STATUS:
+	case MPI_EVENT_QUEUE_FULL:
 		break;
 	default:
-		rc = mptscsih_event_process(ioc, reply);
-		break;
+		return 0;
 	}
- out:
 
-	return rc;
+	event_data_sz = ((reply->MsgLength * 4) -
+	    offsetof(EventNotificationReply_t, Data));
+	sz = offsetof(struct fw_event_work, event_data) + event_data_sz;
+	fw_event = kzalloc(sz, GFP_ATOMIC);
+	if (!fw_event) {
+		printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", ioc->name,
+		 __func__, __LINE__);
+		return 0;
+	}
+	memcpy(fw_event->event_data, reply->Data, event_data_sz);
+	fw_event->event = event;
+	fw_event->ioc = ioc;
+	mptsas_add_fw_event(ioc, fw_event, delay);
+	return 0;
+}
+
+/* Delete a volume when no longer listed in ioc pg2
+ */
+static void mptsas_volume_delete(MPT_ADAPTER *ioc, u8 id)
+{
+	struct scsi_device *sdev;
+	int i;
+
+	sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, id, 0);
+	if (!sdev)
+		return;
+	if (!ioc->raid_data.pIocPg2)
+		goto out;
+	if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
+		goto out;
+	for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
+		if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id)
+			goto release_sdev;
+ out:
+	printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
+	    "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL, id);
+	scsi_remove_device(sdev);
+ release_sdev:
+	scsi_device_put(sdev);
 }
 
 static int
@@ -3128,6 +4701,7 @@
 		return r;
 
 	ioc = pci_get_drvdata(pdev);
+	mptsas_fw_event_off(ioc);
 	ioc->DoneCtx = mptsasDoneCtx;
 	ioc->TaskCtx = mptsasTaskCtx;
 	ioc->InternalCtx = mptsasInternalCtx;
@@ -3211,17 +4785,15 @@
 	 * A slightly different algorithm is required for
 	 * 64bit SGEs.
 	 */
-	scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	scale = ioc->req_sz/ioc->SGE_size;
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		numSGE = (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 60) / ioc->SGE_size;
 	} else {
 		numSGE = 1 + (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 64) / ioc->SGE_size;
 	}
 
 	if (numSGE < sh->sg_tablesize) {
@@ -3251,9 +4823,6 @@
 
 	/* Clear the TM flags
 	 */
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	hd->resetPending = 0;
 	hd->abortSCpnt = NULL;
 
 	/* Clear the pointer used to store
@@ -3273,10 +4842,11 @@
 
 	ioc->sas_data.ptClear = mpt_pt_clear;
 
-	init_waitqueue_head(&hd->scandv_waitq);
-	hd->scandv_wait_done = 0;
 	hd->last_queue_full = 0;
 	INIT_LIST_HEAD(&hd->target_reset_list);
+	INIT_LIST_HEAD(&ioc->sas_device_info_list);
+	mutex_init(&ioc->sas_device_info_mutex);
+
 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 
 	if (ioc->sas_data.ptClear==1) {
@@ -3291,8 +4861,11 @@
 		goto out_mptsas_probe;
 	}
 
+	/* older firmware doesn't support expander events */
+	if ((ioc->facts.HeaderVersion >> 8) < 0xE)
+		ioc->old_sas_discovery_protocal = 1;
 	mptsas_scan_sas_topology(ioc);
-
+	mptsas_fw_event_on(ioc);
 	return 0;
 
  out_mptsas_probe:
@@ -3301,12 +4874,25 @@
 	return error;
 }
 
+void
+mptsas_shutdown(struct pci_dev *pdev)
+{
+	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+
+	mptsas_fw_event_off(ioc);
+	mptsas_cleanup_fw_event_q(ioc);
+}
+
 static void __devexit mptsas_remove(struct pci_dev *pdev)
 {
 	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 	struct mptsas_portinfo *p, *n;
 	int i;
 
+	mptsas_shutdown(pdev);
+
+	mptsas_del_device_components(ioc);
+
 	ioc->sas_discovery_ignore_events = 1;
 	sas_remove_host(ioc->sh);
 
@@ -3315,11 +4901,12 @@
 		list_del(&p->list);
 		for (i = 0 ; i < p->num_phys ; i++)
 			mptsas_port_delete(ioc, p->phy_info[i].port_details);
+
 		kfree(p->phy_info);
 		kfree(p);
 	}
 	mutex_unlock(&ioc->sas_topology_mutex);
-
+	ioc->hba_port_info = NULL;
 	mptscsih_remove(pdev);
 }
 
@@ -3344,7 +4931,7 @@
 	.id_table	= mptsas_pci_table,
 	.probe		= mptsas_probe,
 	.remove		= __devexit_p(mptsas_remove),
-	.shutdown	= mptscsih_shutdown,
+	.shutdown	= mptsas_shutdown,
 #ifdef CONFIG_PM
 	.suspend	= mptscsih_suspend,
 	.resume		= mptscsih_resume,
@@ -3364,10 +4951,12 @@
 		return -ENODEV;
 
 	mptsasDoneCtx = mpt_register(mptscsih_io_done, MPTSAS_DRIVER);
-	mptsasTaskCtx = mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER);
+	mptsasTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSAS_DRIVER);
 	mptsasInternalCtx =
 		mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER);
 	mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER);
+	mptsasDeviceResetCtx =
+		mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER);
 
 	mpt_event_register(mptsasDoneCtx, mptsas_event_process);
 	mpt_reset_register(mptsasDoneCtx, mptsas_ioc_reset);
@@ -3392,6 +4981,7 @@
 	mpt_deregister(mptsasInternalCtx);
 	mpt_deregister(mptsasTaskCtx);
 	mpt_deregister(mptsasDoneCtx);
+	mpt_deregister(mptsasDeviceResetCtx);
 }
 
 module_init(mptsas_init);
diff --git a/drivers/message/fusion/mptsas.h b/drivers/message/fusion/mptsas.h
index 2b544e0..953c2bf 100644
--- a/drivers/message/fusion/mptsas.h
+++ b/drivers/message/fusion/mptsas.h
@@ -53,6 +53,7 @@
 	struct list_head 	list;
 	EVENT_DATA_SAS_DEVICE_STATUS_CHANGE sas_event_data;
 	u8	target_reset_issued;
+	unsigned long	 time_count;
 };
 
 enum mptsas_hotplug_action {
@@ -60,12 +61,37 @@
 	MPTSAS_DEL_DEVICE,
 	MPTSAS_ADD_RAID,
 	MPTSAS_DEL_RAID,
+	MPTSAS_ADD_PHYSDISK,
+	MPTSAS_ADD_PHYSDISK_REPROBE,
+	MPTSAS_DEL_PHYSDISK,
+	MPTSAS_DEL_PHYSDISK_REPROBE,
 	MPTSAS_ADD_INACTIVE_VOLUME,
 	MPTSAS_IGNORE_EVENT,
 };
 
+struct mptsas_mapping{
+	u8			id;
+	u8			channel;
+};
+
+struct mptsas_device_info {
+	struct list_head 	list;
+	struct mptsas_mapping	os;	/* operating system mapping*/
+	struct mptsas_mapping	fw;	/* firmware mapping */
+	u64			sas_address;
+	u32			device_info; /* specific bits for devices */
+	u16			slot;		/* enclosure slot id */
+	u64			enclosure_logical_id; /*enclosure address */
+	u8			is_logical_volume; /* is this logical volume */
+	/* this belongs to volume */
+	u8			is_hidden_raid_component;
+	/* this valid when is_hidden_raid_component set */
+	u8			volume_id;
+	/* cached data for a removed device */
+	u8			is_cached;
+};
+
 struct mptsas_hotplug_event {
-	struct work_struct	work;
 	MPT_ADAPTER		*ioc;
 	enum mptsas_hotplug_action event_type;
 	u64			sas_address;
@@ -73,11 +99,18 @@
 	u8			id;
 	u32			device_info;
 	u16			handle;
-	u16			parent_handle;
 	u8			phy_id;
-	u8			phys_disk_num_valid;	/* hrc (hidden raid component) */
 	u8			phys_disk_num;		/* hrc - unique index*/
-	u8			hidden_raid_component;	/* hrc - don't expose*/
+	struct scsi_device	*sdev;
+};
+
+struct fw_event_work {
+	struct list_head 	list;
+	struct delayed_work	 work;
+	MPT_ADAPTER	*ioc;
+	u32			event;
+	u8			retries;
+	u8			event_data[1];
 };
 
 struct mptsas_discovery_event {
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index e62c6bc..024e830 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -80,7 +80,7 @@
 /*
  *  Other private/forward protos...
  */
-static struct scsi_cmnd * mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
+struct scsi_cmnd	*mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
 static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i);
 static void	mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd);
 static int	SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd);
@@ -92,18 +92,24 @@
 				 SCSIIORequest_t *pReq, int req_idx);
 static void	mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
 static void	mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
-static int	mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd);
-static int	mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout );
 
-static int	mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout);
+int	mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id,
+		int lun, int ctx2abort, ulong timeout);
 
 int		mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
 int		mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
 
+void
+mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
+static int	mptscsih_get_completion_code(MPT_ADAPTER *ioc,
+		MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
 int		mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
 static int	mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
 static void	mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
 
+static int
+mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
+				SCSITaskMgmtReply_t *pScsiTmReply);
 void 		mptscsih_remove(struct pci_dev *);
 void 		mptscsih_shutdown(struct pci_dev *);
 #ifdef CONFIG_PM
@@ -113,69 +119,6 @@
 
 #define SNS_LEN(scp)	SCSI_SENSE_BUFFERSIZE
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_add_sge - Place a simple SGE at address pAddr.
- *	@pAddr: virtual address for SGE
- *	@flagslength: SGE flags and data transfer length
- *	@dma_addr: Physical address
- *
- *	This routine places a MPT request frame back on the MPT adapter's
- *	FreeQ.
- */
-static inline void
-mptscsih_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
-{
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
-		u32 tmp = dma_addr & 0xFFFFFFFF;
-
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address.Low = cpu_to_le32(tmp);
-		tmp = (u32) ((u64)dma_addr >> 32);
-		pSge->Address.High = cpu_to_le32(tmp);
-
-	} else {
-		SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address = cpu_to_le32(dma_addr);
-	}
-} /* mptscsih_add_sge() */
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_add_chain - Place a chain SGE at address pAddr.
- *	@pAddr: virtual address for SGE
- *	@next: nextChainOffset value (u32's)
- *	@length: length of next SGL segment
- *	@dma_addr: Physical address
- *
- *	This routine places a MPT request frame back on the MPT adapter's
- *	FreeQ.
- */
-static inline void
-mptscsih_add_chain(char *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
-{
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
-		u32 tmp = dma_addr & 0xFFFFFFFF;
-
-		pChain->Length = cpu_to_le16(length);
-		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
-
-		pChain->NextChainOffset = next;
-
-		pChain->Address.Low = cpu_to_le32(tmp);
-		tmp = (u32) ((u64)dma_addr >> 32);
-		pChain->Address.High = cpu_to_le32(tmp);
-	} else {
-		SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
-		pChain->Length = cpu_to_le16(length);
-		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
-		pChain->NextChainOffset = next;
-		pChain->Address = cpu_to_le32(dma_addr);
-	}
-} /* mptscsih_add_chain() */
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -281,10 +224,10 @@
 	 */
 
 nextSGEset:
-	numSgeSlots = ((frm_sz - sgeOffset) / (sizeof(u32) + sizeof(dma_addr_t)) );
+	numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size);
 	numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
 
-	sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | MPT_SGE_FLAGS_ADDRESSING | sgdir;
+	sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir;
 
 	/* Get first (num - 1) SG elements
 	 * Skip any SG entries with a length of 0
@@ -293,17 +236,19 @@
 	for (ii=0; ii < (numSgeThisFrame-1); ii++) {
 		thisxfer = sg_dma_len(sg);
 		if (thisxfer == 0) {
-			sg = sg_next(sg); /* Get next SG element from the OS */
+			/* Get next SG element from the OS */
+			sg = sg_next(sg);
 			sg_done++;
 			continue;
 		}
 
 		v2 = sg_dma_address(sg);
-		mptscsih_add_sge(psge, sgflags | thisxfer, v2);
+		ioc->add_sge(psge, sgflags | thisxfer, v2);
 
-		sg = sg_next(sg);	/* Get next SG element from the OS */
-		psge += (sizeof(u32) + sizeof(dma_addr_t));
-		sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
+		/* Get next SG element from the OS */
+		sg = sg_next(sg);
+		psge += ioc->SGE_size;
+		sgeOffset += ioc->SGE_size;
 		sg_done++;
 	}
 
@@ -320,12 +265,8 @@
 		thisxfer = sg_dma_len(sg);
 
 		v2 = sg_dma_address(sg);
-		mptscsih_add_sge(psge, sgflags | thisxfer, v2);
-		/*
-		sg = sg_next(sg);
-		psge += (sizeof(u32) + sizeof(dma_addr_t));
-		*/
-		sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
+		ioc->add_sge(psge, sgflags | thisxfer, v2);
+		sgeOffset += ioc->SGE_size;
 		sg_done++;
 
 		if (chainSge) {
@@ -334,7 +275,8 @@
 			 * Update the chain element
 			 * Offset and Length fields.
 			 */
-			mptscsih_add_chain((char *)chainSge, 0, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
+			ioc->add_chain((char *)chainSge, 0, sgeOffset,
+				ioc->ChainBufferDMA + chain_dma_off);
 		} else {
 			/* The current buffer is the original MF
 			 * and there is no Chain buffer.
@@ -367,7 +309,7 @@
 		 * set properly).
 		 */
 		if (sg_done) {
-			u32 *ptmp = (u32 *) (psge - (sizeof(u32) + sizeof(dma_addr_t)));
+			u32 *ptmp = (u32 *) (psge - ioc->SGE_size);
 			sgflags = le32_to_cpu(*ptmp);
 			sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
 			*ptmp = cpu_to_le32(sgflags);
@@ -381,8 +323,9 @@
 			 * Old chain element is now complete.
 			 */
 			u8 nextChain = (u8) (sgeOffset >> 2);
-			sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
-			mptscsih_add_chain((char *)chainSge, nextChain, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
+			sgeOffset += ioc->SGE_size;
+			ioc->add_chain((char *)chainSge, nextChain, sgeOffset,
+					 ioc->ChainBufferDMA + chain_dma_off);
 		} else {
 			/* The original MF buffer requires a chain buffer -
 			 * set the offset.
@@ -592,14 +535,15 @@
 	}
 
 	scsi_print_command(sc);
-	printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d\n",
-	    ioc->name, pScsiReply->Bus, pScsiReply->TargetID);
+	printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %d\n",
+	    ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun);
 	printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, "
 	    "resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow,
 	    scsi_get_resid(sc));
 	printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, "
 	    "sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag),
 	    le32_to_cpu(pScsiReply->TransferCount), sc->result);
+
 	printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), "
 	    "scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n",
 	    ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus,
@@ -654,16 +598,14 @@
 	req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
 	req_idx_MR = (mr != NULL) ?
 	    le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
+
+	/* Special case, where already freed message frame is received from
+	 * Firmware. It happens with Resetting IOC.
+	 * Return immediately. Do not care
+	 */
 	if ((req_idx != req_idx_MR) ||
-	    (mf->u.frame.linkage.arg1 == 0xdeadbeaf)) {
-		printk(MYIOC_s_ERR_FMT "Received a mf that was already freed\n",
-		    ioc->name);
-		printk (MYIOC_s_ERR_FMT
-		    "req_idx=%x req_idx_MR=%x mf=%p mr=%p sc=%p\n",
-		    ioc->name, req_idx, req_idx_MR, mf, mr,
-		    mptscsih_get_scsi_lookup(ioc, req_idx_MR));
+	    (le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf))
 		return 0;
-	}
 
 	sc = mptscsih_getclear_scsi_lookup(ioc, req_idx);
 	if (sc == NULL) {
@@ -810,12 +752,16 @@
 			 */
 
 		case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
-		case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
 			/* Linux handles an unsolicited DID_RESET better
 			 * than an unsolicited DID_ABORT.
 			 */
 			sc->result = DID_RESET << 16;
 
+		case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
+			if (ioc->bus_type == FC)
+				sc->result = DID_ERROR << 16;
+			else
+				sc->result = DID_RESET << 16;
 			break;
 
 		case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:	/* 0x0049 */
@@ -992,9 +938,9 @@
 		scsi_dma_unmap(sc);
 		sc->result = DID_RESET << 16;
 		sc->host_scribble = NULL;
-		sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
-		    "completing cmds: fw_channel %d, fw_id %d, sc=%p,"
-		    " mf = %p, idx=%x\n", ioc->name, channel, id, sc, mf, ii);
+		dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
+		    "completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, "
+		    "idx=%x\n", ioc->name, channel, id, sc, mf, ii));
 		sc->scsi_done(sc);
 	}
 }
@@ -1053,9 +999,11 @@
 			scsi_dma_unmap(sc);
 			sc->host_scribble = NULL;
 			sc->result = DID_NO_CONNECT << 16;
-			sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT "completing cmds: fw_channel %d,"
-			   "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name, vdevice->vtarget->channel,
-			   vdevice->vtarget->id, sc, mf, ii);
+			dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device,
+			   MYIOC_s_FMT "completing cmds: fw_channel %d, "
+			   "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name,
+			   vdevice->vtarget->channel, vdevice->vtarget->id,
+			   sc, mf, ii));
 			sc->scsi_done(sc);
 			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 		}
@@ -1346,7 +1294,6 @@
 	MPT_FRAME_HDR		*mf;
 	SCSIIORequest_t		*pScsiReq;
 	VirtDevice		*vdevice = SCpnt->device->hostdata;
-	int	 lun;
 	u32	 datalen;
 	u32	 scsictl;
 	u32	 scsidir;
@@ -1357,13 +1304,12 @@
 
 	hd = shost_priv(SCpnt->device->host);
 	ioc = hd->ioc;
-	lun = SCpnt->device->lun;
 	SCpnt->scsi_done = done;
 
 	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p, done()=%p\n",
 		ioc->name, SCpnt, done));
 
-	if (hd->resetPending) {
+	if (ioc->taskmgmt_quiesce_io) {
 		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n",
 			ioc->name, SCpnt));
 		return SCSI_MLQUEUE_HOST_BUSY;
@@ -1422,7 +1368,7 @@
 	pScsiReq->CDBLength = SCpnt->cmd_len;
 	pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
 	pScsiReq->Reserved = 0;
-	pScsiReq->MsgFlags = mpt_msg_flags();
+	pScsiReq->MsgFlags = mpt_msg_flags(ioc);
 	int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
 	pScsiReq->Control = cpu_to_le32(scsictl);
 
@@ -1448,7 +1394,8 @@
 	 */
 	if (datalen == 0) {
 		/* Add a NULL SGE */
-		mptscsih_add_sge((char *)&pScsiReq->SGL, MPT_SGE_FLAGS_SSIMPLE_READ | 0,
+		ioc->add_sge((char *)&pScsiReq->SGL,
+			MPT_SGE_FLAGS_SSIMPLE_READ | 0,
 			(dma_addr_t) -1);
 	} else {
 		/* Add a 32 or 64 bit SGE */
@@ -1528,120 +1475,6 @@
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mptscsih_TMHandler - Generic handler for SCSI Task Management.
- *	@hd: Pointer to MPT SCSI HOST structure
- *	@type: Task Management type
- *	@channel: channel number for task management
- *	@id: Logical Target ID for reset (if appropriate)
- *	@lun: Logical Unit for reset (if appropriate)
- *	@ctx2abort: Context for the task to be aborted (if appropriate)
- *	@timeout: timeout for task management control
- *
- *	Fall through to mpt_HardResetHandler if: not operational, too many
- *	failed TM requests or handshake failure.
- *
- *	Remark: Currently invoked from a non-interrupt thread (_bh).
- *
- *	Note: With old EH code, at most 1 SCSI TaskMgmt function per IOC
- *	will be active.
- *
- *	Returns 0 for SUCCESS, or %FAILED.
- **/
-int
-mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
-{
-	MPT_ADAPTER	*ioc;
-	int		 rc = -1;
-	u32		 ioc_raw_state;
-	unsigned long	 flags;
-
-	ioc = hd->ioc;
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler Entered!\n", ioc->name));
-
-	// SJR - CHECKME - Can we avoid this here?
-	// (mpt_HardResetHandler has this check...)
-	spin_lock_irqsave(&ioc->diagLock, flags);
-	if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)) {
-		spin_unlock_irqrestore(&ioc->diagLock, flags);
-		return FAILED;
-	}
-	spin_unlock_irqrestore(&ioc->diagLock, flags);
-
-	/*  Wait a fixed amount of time for the TM pending flag to be cleared.
-	 *  If we time out and not bus reset, then we return a FAILED status
-	 *  to the caller.
-	 *  The call to mptscsih_tm_pending_wait() will set the pending flag
-	 *  if we are
-	 *  successful. Otherwise, reload the FW.
-	 */
-	if (mptscsih_tm_pending_wait(hd) == FAILED) {
-		if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
-			dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler abort: "
-			   "Timed out waiting for last TM (%d) to complete! \n",
-			   ioc->name, hd->tmPending));
-			return FAILED;
-		} else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
-			dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler target "
-				"reset: Timed out waiting for last TM (%d) "
-				"to complete! \n", ioc->name,
-				hd->tmPending));
-			return FAILED;
-		} else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
-			dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler bus reset: "
-			   "Timed out waiting for last TM (%d) to complete! \n",
-			  ioc->name, hd->tmPending));
-			return FAILED;
-		}
-	} else {
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		hd->tmPending |=  (1 << type);
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-	}
-
-	ioc_raw_state = mpt_GetIocState(ioc, 0);
-
-	if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
-		printk(MYIOC_s_WARN_FMT
-			"TM Handler for type=%x: IOC Not operational (0x%x)!\n",
-			ioc->name, type, ioc_raw_state);
-		printk(MYIOC_s_WARN_FMT " Issuing HardReset!!\n", ioc->name);
-		if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
-			printk(MYIOC_s_WARN_FMT "TMHandler: HardReset "
-			    "FAILED!!\n", ioc->name);
-		return FAILED;
-	}
-
-	if (ioc_raw_state & MPI_DOORBELL_ACTIVE) {
-		printk(MYIOC_s_WARN_FMT
-			"TM Handler for type=%x: ioc_state: "
-			"DOORBELL_ACTIVE (0x%x)!\n",
-			ioc->name, type, ioc_raw_state);
-		return FAILED;
-	}
-
-	/* Isse the Task Mgmt request.
-	 */
-	if (hd->hard_resets < -1)
-		hd->hard_resets++;
-
-	rc = mptscsih_IssueTaskMgmt(hd, type, channel, id, lun,
-	    ctx2abort, timeout);
-	if (rc)
-		printk(MYIOC_s_INFO_FMT "Issue of TaskMgmt failed!\n",
-		       ioc->name);
-	else
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issue of TaskMgmt Successful!\n",
-			   ioc->name));
-
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-			"TMHandler rc = %d!\n", ioc->name, rc));
-
-	return rc;
-}
-
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
  *	mptscsih_IssueTaskMgmt - Generic send Task Management function.
  *	@hd: Pointer to MPT_SCSI_HOST structure
  *	@type: Task Management type
@@ -1659,23 +1492,60 @@
  *	Returns 0 for SUCCESS, or FAILED.
  *
  **/
-static int
-mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
+int
+mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun,
+	int ctx2abort, ulong timeout)
 {
 	MPT_FRAME_HDR	*mf;
 	SCSITaskMgmt_t	*pScsiTm;
 	int		 ii;
 	int		 retval;
 	MPT_ADAPTER 	*ioc = hd->ioc;
+	unsigned long	 timeleft;
+	u8		 issue_hard_reset;
+	u32		 ioc_raw_state;
+	unsigned long	 time_count;
+
+	issue_hard_reset = 0;
+	ioc_raw_state = mpt_GetIocState(ioc, 0);
+
+	if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
+		printk(MYIOC_s_WARN_FMT
+			"TaskMgmt type=%x: IOC Not operational (0x%x)!\n",
+			ioc->name, type, ioc_raw_state);
+		printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
+		    ioc->name, __func__);
+		if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
+			printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset "
+			    "FAILED!!\n", ioc->name);
+		return 0;
+	}
+
+	if (ioc_raw_state & MPI_DOORBELL_ACTIVE) {
+		printk(MYIOC_s_WARN_FMT
+			"TaskMgmt type=%x: ioc_state: "
+			"DOORBELL_ACTIVE (0x%x)!\n",
+			ioc->name, type, ioc_raw_state);
+		return FAILED;
+	}
+
+	mutex_lock(&ioc->taskmgmt_cmds.mutex);
+	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+		mf = NULL;
+		retval = FAILED;
+		goto out;
+	}
 
 	/* Return Fail to calling function if no message frames available.
 	 */
 	if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
-		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n",
-				ioc->name));
-		return FAILED;
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"TaskMgmt no msg frames!!\n", ioc->name));
+		retval = FAILED;
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		goto out;
 	}
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt request @ %p\n",
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
 			ioc->name, mf));
 
 	/* Format the Request
@@ -1699,11 +1569,14 @@
 
 	pScsiTm->TaskMsgContext = ctx2abort;
 
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt: ctx2abort (0x%08x) "
-		"type=%d\n", ioc->name, ctx2abort, type));
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) "
+		"task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort,
+		type, timeout));
 
 	DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm);
 
+	INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	time_count = jiffies;
 	if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
 	    (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
 		mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
@@ -1711,47 +1584,50 @@
 		retval = mpt_send_handshake_request(ioc->TaskCtx, ioc,
 			sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
 		if (retval) {
-			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "send_handshake FAILED!"
-			" (hd %p, ioc %p, mf %p, rc=%d) \n", ioc->name, hd,
-			ioc, mf, retval));
-			goto fail_out;
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+				"TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n",
+				ioc->name, mf, retval));
+			mpt_free_msg_frame(ioc, mf);
+			mpt_clear_taskmgmt_in_progress_flag(ioc);
+			goto out;
 		}
 	}
 
-	if(mptscsih_tm_wait_for_completion(hd, timeout) == FAILED) {
-		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "task management request TIMED OUT!"
-			" (hd %p, ioc %p, mf %p) \n", ioc->name, hd,
-			ioc, mf));
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
-			 ioc->name));
-		retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "rc=%d \n",
-			 ioc->name, retval));
-		goto fail_out;
+	timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
+		timeout*HZ);
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		retval = FAILED;
+		dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
+		    "TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf));
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		issue_hard_reset = 1;
+		goto out;
 	}
 
-	/*
-	 * Handle success case, see if theres a non-zero ioc_status.
-	 */
-	if (hd->tm_iocstatus == MPI_IOCSTATUS_SUCCESS ||
-	   hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
-	   hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
-		retval = 0;
-	else
-		retval = FAILED;
+	retval = mptscsih_taskmgmt_reply(ioc, type,
+	    (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply);
 
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "TaskMgmt completed (%d seconds)\n",
+	    ioc->name, jiffies_to_msecs(jiffies - time_count)/1000));
+
+ out:
+
+	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	if (issue_hard_reset) {
+		printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+			ioc->name, __func__);
+		retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
+		mpt_free_msg_frame(ioc, mf);
+	}
+
+	retval = (retval == 0) ? 0 : FAILED;
+	mutex_unlock(&ioc->taskmgmt_cmds.mutex);
 	return retval;
-
- fail_out:
-
-	/*
-	 * Free task management mf, and corresponding tm flags
-	 */
-	mpt_free_msg_frame(ioc, mf);
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	return FAILED;
 }
+EXPORT_SYMBOL(mptscsih_IssueTaskMgmt);
 
 static int
 mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
@@ -1838,13 +1714,8 @@
 		goto out;
 	}
 
-	if (hd->resetPending) {
-		retval = FAILED;
-		goto out;
-	}
-
-	if (hd->timeouts < -1)
-		hd->timeouts++;
+	if (ioc->timeouts < -1)
+		ioc->timeouts++;
 
 	if (mpt_fwfault_debug)
 		mpt_halt_firmware(ioc);
@@ -1861,22 +1732,30 @@
 
 	hd->abortSCpnt = SCpnt;
 
-	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
-	    vdevice->vtarget->channel, vdevice->vtarget->id, vdevice->lun,
-	    ctx2abort, mptscsih_get_tm_timeout(ioc));
+	retval = mptscsih_IssueTaskMgmt(hd,
+			 MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
+			 vdevice->vtarget->channel,
+			 vdevice->vtarget->id, vdevice->lun,
+			 ctx2abort, mptscsih_get_tm_timeout(ioc));
 
 	if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx &&
-	    SCpnt->serial_number == sn)
+	    SCpnt->serial_number == sn) {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "task abort: command still in active list! (sc=%p)\n",
+		    ioc->name, SCpnt));
 		retval = FAILED;
+	} else {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "task abort: command cleared from active list! (sc=%p)\n",
+		    ioc->name, SCpnt));
+		retval = SUCCESS;
+	}
 
  out:
 	printk(MYIOC_s_INFO_FMT "task abort: %s (sc=%p)\n",
-	    ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
+	    ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), SCpnt);
 
-	if (retval == 0)
-		return SUCCESS;
-	else
-		return FAILED;
+	return retval;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1909,14 +1788,9 @@
 	       ioc->name, SCpnt);
 	scsi_print_command(SCpnt);
 
-	if (hd->resetPending) {
-		retval = FAILED;
-		goto out;
-	}
-
 	vdevice = SCpnt->device->hostdata;
 	if (!vdevice || !vdevice->vtarget) {
-		retval = 0;
+		retval = SUCCESS;
 		goto out;
 	}
 
@@ -1927,9 +1801,11 @@
 		goto out;
 	}
 
-	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
-	    vdevice->vtarget->channel, vdevice->vtarget->id, 0, 0,
-	    mptscsih_get_tm_timeout(ioc));
+	retval = mptscsih_IssueTaskMgmt(hd,
+				MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
+				vdevice->vtarget->channel,
+				vdevice->vtarget->id, 0, 0,
+				mptscsih_get_tm_timeout(ioc));
 
  out:
 	printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n",
@@ -1972,12 +1848,16 @@
 	       ioc->name, SCpnt);
 	scsi_print_command(SCpnt);
 
-	if (hd->timeouts < -1)
-		hd->timeouts++;
+	if (ioc->timeouts < -1)
+		ioc->timeouts++;
 
 	vdevice = SCpnt->device->hostdata;
-	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
-	    vdevice->vtarget->channel, 0, 0, 0, mptscsih_get_tm_timeout(ioc));
+	if (!vdevice || !vdevice->vtarget)
+		return SUCCESS;
+	retval = mptscsih_IssueTaskMgmt(hd,
+					MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+					vdevice->vtarget->channel, 0, 0, 0,
+					mptscsih_get_tm_timeout(ioc));
 
 	printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
 	    ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
@@ -2001,8 +1881,9 @@
 mptscsih_host_reset(struct scsi_cmnd *SCpnt)
 {
 	MPT_SCSI_HOST *  hd;
-	int              retval;
+	int              status = SUCCESS;
 	MPT_ADAPTER	*ioc;
+	int		retval;
 
 	/*  If we can't locate the host to reset, then we failed. */
 	if ((hd = shost_priv(SCpnt->device->host)) == NULL){
@@ -2021,86 +1902,71 @@
 	/*  If our attempts to reset the host failed, then return a failed
 	 *  status.  The host will be taken off line by the SCSI mid-layer.
 	 */
-	if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0) {
-		retval = FAILED;
-	} else {
-		/*  Make sure TM pending is cleared and TM state is set to
-		 *  NONE.
-		 */
-		retval = 0;
-		hd->tmPending = 0;
-		hd->tmState = TM_STATE_NONE;
-	}
+    retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
+	if (retval < 0)
+		status = FAILED;
+	else
+		status = SUCCESS;
 
 	printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
 	    ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
 
+	return status;
+}
+
+static int
+mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
+	SCSITaskMgmtReply_t *pScsiTmReply)
+{
+	u16			 iocstatus;
+	u32			 termination_count;
+	int			 retval;
+
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		retval = FAILED;
+		goto out;
+	}
+
+	DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
+
+	iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+	termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
+
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n"
+	    "\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n"
+	    "\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus,
+	    pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus),
+	    le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode,
+	    termination_count));
+
+	if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
+	    pScsiTmReply->ResponseCode)
+		mptscsih_taskmgmt_response_code(ioc,
+		    pScsiTmReply->ResponseCode);
+
+	if (iocstatus == MPI_IOCSTATUS_SUCCESS) {
+		retval = 0;
+		goto out;
+	}
+
+	retval = FAILED;
+	if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
+		if (termination_count == 1)
+			retval = 0;
+		goto out;
+	}
+
+	if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
+	   iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
+		retval = 0;
+
+ out:
 	return retval;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_tm_pending_wait - wait for pending task management request to complete
- *	@hd: Pointer to MPT host structure.
- *
- *	Returns {SUCCESS,FAILED}.
- */
-static int
-mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
-{
-	unsigned long  flags;
-	int            loop_count = 4 * 10;  /* Wait 10 seconds */
-	int            status = FAILED;
-	MPT_ADAPTER	*ioc = hd->ioc;
-
-	do {
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		if (hd->tmState == TM_STATE_NONE) {
-			hd->tmState = TM_STATE_IN_PROGRESS;
-			hd->tmPending = 1;
-			spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-			status = SUCCESS;
-			break;
-		}
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-		msleep(250);
-	} while (--loop_count);
-
-	return status;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_tm_wait_for_completion - wait for completion of TM task
- *	@hd: Pointer to MPT host structure.
- *	@timeout: timeout value
- *
- *	Returns {SUCCESS,FAILED}.
- */
-static int
-mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout )
-{
-	unsigned long  flags;
-	int            loop_count = 4 * timeout;
-	int            status = FAILED;
-	MPT_ADAPTER	*ioc = hd->ioc;
-
-	do {
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		if(hd->tmPending == 0) {
-			status = SUCCESS;
-			spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-			break;
-		}
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-		msleep(250);
-	} while (--loop_count);
-
-	return status;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-static void
+void
 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
 {
 	char *desc;
@@ -2134,6 +2000,7 @@
 	printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
 		ioc->name, response_code, desc);
 }
+EXPORT_SYMBOL(mptscsih_taskmgmt_response_code);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
@@ -2150,97 +2017,28 @@
  *	Returns 1 indicating alloc'd request frame ptr should be freed.
  **/
 int
-mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf,
+	MPT_FRAME_HDR *mr)
 {
-	SCSITaskMgmtReply_t	*pScsiTmReply;
-	SCSITaskMgmt_t		*pScsiTmReq;
-	MPT_SCSI_HOST		*hd;
-	unsigned long		 flags;
-	u16			 iocstatus;
-	u8			 tmType;
-	u32			 termination_count;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		"TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr));
 
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt completed (mf=%p,mr=%p)\n",
-	    ioc->name, mf, mr));
-	if (!ioc->sh) {
-		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
-		    "TaskMgmt Complete: NULL Scsi Host Ptr\n", ioc->name));
-		return 1;
-	}
+	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
 
-	if (mr == NULL) {
-		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
-		    "ERROR! TaskMgmt Reply: NULL Request %p\n", ioc->name, mf));
-		return 1;
-	}
-
-	hd = shost_priv(ioc->sh);
-	pScsiTmReply = (SCSITaskMgmtReply_t*)mr;
-	pScsiTmReq = (SCSITaskMgmt_t*)mf;
-	tmType = pScsiTmReq->TaskType;
-	iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
-	termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
-
-	if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
-	    pScsiTmReply->ResponseCode)
-		mptscsih_taskmgmt_response_code(ioc,
-		    pScsiTmReply->ResponseCode);
-	DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
-
-#ifdef CONFIG_FUSION_LOGGING
-	if ((ioc->debug_level & MPT_DEBUG_REPLY) ||
-				(ioc->debug_level & MPT_DEBUG_TM ))
-		printk("%s: ha=%d [%d:%d:0] task_type=0x%02X "
-			"iocstatus=0x%04X\n\tloginfo=0x%08X response_code=0x%02X "
-			"term_cmnds=%d\n", __func__, ioc->id, pScsiTmReply->Bus,
-			 pScsiTmReply->TargetID, pScsiTmReq->TaskType,
-			le16_to_cpu(pScsiTmReply->IOCStatus),
-			le32_to_cpu(pScsiTmReply->IOCLogInfo),pScsiTmReply->ResponseCode,
-			le32_to_cpu(pScsiTmReply->TerminationCount));
-#endif
-	if (!iocstatus) {
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT " TaskMgmt SUCCESS\n", ioc->name));
-			hd->abortSCpnt = NULL;
+	if (!mr)
 		goto out;
-	}
 
-	/* Error?  (anything non-zero?) */
-
-	/* clear flags and continue.
-	 */
-	switch (tmType) {
-
-	case MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
-		if (termination_count == 1)
-			iocstatus = MPI_IOCSTATUS_SCSI_TASK_TERMINATED;
-		hd->abortSCpnt = NULL;
-		break;
-
-	case MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS:
-
-		/* If an internal command is present
-		 * or the TM failed - reload the FW.
-		 * FC FW may respond FAILED to an ABORT
-		 */
-		if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED ||
-		    hd->cmdPtr)
-			if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
-				printk(MYIOC_s_WARN_FMT " Firmware Reload FAILED!!\n", ioc->name);
-		break;
-
-	case MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
-	default:
-		break;
-	}
-
+	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+	memcpy(ioc->taskmgmt_cmds.reply, mr,
+	    min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
  out:
-	spin_lock_irqsave(&ioc->FreeQlock, flags);
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	hd->tm_iocstatus = iocstatus;
-	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-	return 1;
+	if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+		complete(&ioc->taskmgmt_cmds.done);
+		return 1;
+	}
+	return 0;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -2290,8 +2088,10 @@
 mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
 {
 	struct inactive_raid_component_info *component_info;
-	int i;
+	int i, j;
+	RaidPhysDiskPage1_t *phys_disk;
 	int rc = 0;
+	int num_paths;
 
 	if (!ioc->raid_data.pIocPg3)
 		goto out;
@@ -2303,6 +2103,45 @@
 		}
 	}
 
+	if (ioc->bus_type != SAS)
+		goto out;
+
+	/*
+	 * Check if dual path
+	 */
+	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+		num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
+		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
+		if (num_paths < 2)
+			continue;
+		phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+		   (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+		if (!phys_disk)
+			continue;
+		if ((mpt_raid_phys_disk_pg1(ioc,
+		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
+		    phys_disk))) {
+			kfree(phys_disk);
+			continue;
+		}
+		for (j = 0; j < num_paths; j++) {
+			if ((phys_disk->Path[j].Flags &
+			    MPI_RAID_PHYSDISK1_FLAG_INVALID))
+				continue;
+			if ((phys_disk->Path[j].Flags &
+			    MPI_RAID_PHYSDISK1_FLAG_BROKEN))
+				continue;
+			if ((id == phys_disk->Path[j].PhysDiskID) &&
+			    (channel == phys_disk->Path[j].PhysDiskBus)) {
+				rc = 1;
+				kfree(phys_disk);
+				goto out;
+			}
+		}
+		kfree(phys_disk);
+	}
+
+
 	/*
 	 * Check inactive list for matching phys disks
 	 */
@@ -2327,8 +2166,10 @@
 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
 {
 	struct inactive_raid_component_info *component_info;
-	int i;
+	int i, j;
+	RaidPhysDiskPage1_t *phys_disk;
 	int rc = -ENXIO;
+	int num_paths;
 
 	if (!ioc->raid_data.pIocPg3)
 		goto out;
@@ -2340,6 +2181,44 @@
 		}
 	}
 
+	if (ioc->bus_type != SAS)
+		goto out;
+
+	/*
+	 * Check if dual path
+	 */
+	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+		num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
+		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
+		if (num_paths < 2)
+			continue;
+		phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+		   (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+		if (!phys_disk)
+			continue;
+		if ((mpt_raid_phys_disk_pg1(ioc,
+		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
+		    phys_disk))) {
+			kfree(phys_disk);
+			continue;
+		}
+		for (j = 0; j < num_paths; j++) {
+			if ((phys_disk->Path[j].Flags &
+			    MPI_RAID_PHYSDISK1_FLAG_INVALID))
+				continue;
+			if ((phys_disk->Path[j].Flags &
+			    MPI_RAID_PHYSDISK1_FLAG_BROKEN))
+				continue;
+			if ((id == phys_disk->Path[j].PhysDiskID) &&
+			    (channel == phys_disk->Path[j].PhysDiskBus)) {
+				rc = phys_disk->PhysDiskNum;
+				kfree(phys_disk);
+				goto out;
+			}
+		}
+		kfree(phys_disk);
+	}
+
 	/*
 	 * Check inactive list for matching phys disks
 	 */
@@ -2457,7 +2336,6 @@
 		    sdev->ppr, sdev->inquiry_len));
 
 	vdevice->configured_lun = 1;
-	mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
 
 	dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		"Queue depth=%d, tflags=%x\n",
@@ -2469,6 +2347,7 @@
 		    ioc->name, vtarget->negoFlags, vtarget->maxOffset,
 		    vtarget->minSyncFactor));
 
+	mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
 	dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		"tagged %d, simple %d, ordered %d\n",
 		ioc->name,sdev->tagged_supported, sdev->simple_tags,
@@ -2542,15 +2421,13 @@
 }
 
 /**
- * mptscsih_get_scsi_lookup
+ * mptscsih_get_scsi_lookup - retrieves scmd entry
  * @ioc: Pointer to MPT_ADAPTER structure
  * @i: index into the array
  *
- * retrieves scmd entry from ScsiLookup[] array list
- *
  * Returns the scsi_cmd pointer
- **/
-static struct scsi_cmnd *
+ */
+struct scsi_cmnd *
 mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
 {
 	unsigned long	flags;
@@ -2562,15 +2439,15 @@
 
 	return scmd;
 }
+EXPORT_SYMBOL(mptscsih_get_scsi_lookup);
 
 /**
- * mptscsih_getclear_scsi_lookup
+ * mptscsih_getclear_scsi_lookup -  retrieves and clears scmd entry from ScsiLookup[] array list
  * @ioc: Pointer to MPT_ADAPTER structure
  * @i: index into the array
  *
- * retrieves and clears scmd entry from ScsiLookup[] array list
- *
  * Returns the scsi_cmd pointer
+ *
  **/
 static struct scsi_cmnd *
 mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
@@ -2635,94 +2512,33 @@
 mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
 	MPT_SCSI_HOST	*hd;
-	unsigned long	 flags;
 
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-	    ": IOC %s_reset routed to SCSI host driver!\n",
-	    ioc->name, reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
-	    reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
-
-	/* If a FW reload request arrives after base installed but
-	 * before all scsi hosts have been attached, then an alt_ioc
-	 * may have a NULL sh pointer.
-	 */
 	if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL)
 		return 0;
-	else
-		hd = shost_priv(ioc->sh);
 
-	if (reset_phase == MPT_IOC_SETUP_RESET) {
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Setup-Diag Reset\n", ioc->name));
-
-		/* Clean Up:
-		 * 1. Set Hard Reset Pending Flag
-		 * All new commands go to doneQ
-		 */
-		hd->resetPending = 1;
-
-	} else if (reset_phase == MPT_IOC_PRE_RESET) {
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Pre-Diag Reset\n", ioc->name));
-
-		/* 2. Flush running commands
-		 *	Clean ScsiLookup (and associated memory)
-		 *	AND clean mytaskQ
-		 */
-
-		/* 2b. Reply to OS all known outstanding I/O commands.
-		 */
+	hd = shost_priv(ioc->sh);
+	switch (reset_phase) {
+	case MPT_IOC_SETUP_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
 		mptscsih_flush_running_cmds(hd);
-
-		/* 2c. If there was an internal command that
-		 * has not completed, configuration or io request,
-		 * free these resources.
-		 */
-		if (hd->cmdPtr) {
-			del_timer(&hd->timer);
-			mpt_free_msg_frame(ioc, hd->cmdPtr);
+		break;
+	case MPT_IOC_POST_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->internal_cmds.status |=
+				MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->internal_cmds.done);
 		}
-
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Pre-Reset complete.\n", ioc->name));
-
-	} else {
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Post-Diag Reset\n", ioc->name));
-
-		/* Once a FW reload begins, all new OS commands are
-		 * redirected to the doneQ w/ a reset status.
-		 * Init all control structures.
-		 */
-
-		/* 2. Chain Buffer initialization
-		 */
-
-		/* 4. Renegotiate to all devices, if SPI
-		 */
-
-		/* 5. Enable new commands to be posted
-		 */
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		hd->tmPending = 0;
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-		hd->resetPending = 0;
-		hd->tmState = TM_STATE_NONE;
-
-		/* 6. If there was an internal command,
-		 * wake this process up.
-		 */
-		if (hd->cmdPtr) {
-			/*
-			 * Wake up the original calling thread
-			 */
-			hd->pLocal = &hd->localReply;
-			hd->pLocal->completion = MPT_SCANDV_DID_RESET;
-			hd->scandv_wait_done = 1;
-			wake_up(&hd->scandv_waitq);
-			hd->cmdPtr = NULL;
-		}
-
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Post-Reset complete.\n", ioc->name));
-
+		break;
+	default:
+		break;
 	}
-
 	return 1;		/* currently means nothing really */
 }
 
@@ -2730,55 +2546,16 @@
 int
 mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 {
-	MPT_SCSI_HOST *hd;
 	u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
 
-	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
-			ioc->name, event));
+	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		"MPT event (=%02Xh) routed to SCSI host driver!\n",
+		ioc->name, event));
 
-	if (ioc->sh == NULL ||
-		((hd = shost_priv(ioc->sh)) == NULL))
-		return 1;
-
-	switch (event) {
-	case MPI_EVENT_UNIT_ATTENTION:			/* 03 */
-		/* FIXME! */
-		break;
-	case MPI_EVENT_IOC_BUS_RESET:			/* 04 */
-	case MPI_EVENT_EXT_BUS_RESET:			/* 05 */
-		if (hd && (ioc->bus_type == SPI) && (hd->soft_resets < -1))
-			hd->soft_resets++;
-		break;
-	case MPI_EVENT_LOGOUT:				/* 09 */
-		/* FIXME! */
-		break;
-
-	case MPI_EVENT_RESCAN:				/* 06 */
-		break;
-
-		/*
-		 *  CHECKME! Don't think we need to do
-		 *  anything for these, but...
-		 */
-	case MPI_EVENT_LINK_STATUS_CHANGE:		/* 07 */
-	case MPI_EVENT_LOOP_STATE_CHANGE:		/* 08 */
-		/*
-		 *  CHECKME!  Falling thru...
-		 */
-		break;
-
-	case MPI_EVENT_INTEGRATED_RAID:			/* 0B */
-		break;
-
-	case MPI_EVENT_NONE:				/* 00 */
-	case MPI_EVENT_LOG_DATA:			/* 01 */
-	case MPI_EVENT_STATE_CHANGE:			/* 02 */
-	case MPI_EVENT_EVENT_CHANGE:			/* 0A */
-	default:
-		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": Ignoring event (=%02Xh)\n",
-		    ioc->name, event));
-		break;
-	}
+	if ((event == MPI_EVENT_IOC_BUS_RESET ||
+	    event == MPI_EVENT_EXT_BUS_RESET) &&
+	    (ioc->bus_type == SPI) && (ioc->soft_resets < -1))
+			ioc->soft_resets++;
 
 	return 1;		/* currently means nothing really */
 }
@@ -2809,153 +2586,44 @@
  *	Used ONLY for DV and other internal commands.
  */
 int
-mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+				MPT_FRAME_HDR *reply)
 {
-	MPT_SCSI_HOST	*hd;
 	SCSIIORequest_t *pReq;
-	int		 completionCode;
+	SCSIIOReply_t	*pReply;
+	u8		 cmd;
 	u16		 req_idx;
+	u8	*sense_data;
+	int		 sz;
 
-	hd = shost_priv(ioc->sh);
+	ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+	ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD;
+	if (!reply)
+		goto out;
 
-	if ((mf == NULL) ||
-	    (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
-		printk(MYIOC_s_ERR_FMT
-			"ScanDvComplete, %s req frame ptr! (=%p)\n",
-				ioc->name, mf?"BAD":"NULL", (void *) mf);
-		goto wakeup;
+	pReply = (SCSIIOReply_t *) reply;
+	pReq = (SCSIIORequest_t *) req;
+	ioc->internal_cmds.completion_code =
+	    mptscsih_get_completion_code(ioc, req, reply);
+	ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+	memcpy(ioc->internal_cmds.reply, reply,
+	    min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength));
+	cmd = reply->u.hdr.Function;
+	if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
+	    (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) &&
+	    (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
+		req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
+		sense_data = ((u8 *)ioc->sense_buf_pool +
+		    (req_idx * MPT_SENSE_BUFFER_ALLOC));
+		sz = min_t(int, pReq->SenseBufferLength,
+		    MPT_SENSE_BUFFER_ALLOC);
+		memcpy(ioc->internal_cmds.sense, sense_data, sz);
 	}
-
-	del_timer(&hd->timer);
-	req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
-	mptscsih_set_scsi_lookup(ioc, req_idx, NULL);
-	pReq = (SCSIIORequest_t *) mf;
-
-	if (mf != hd->cmdPtr) {
-		printk(MYIOC_s_WARN_FMT "ScanDvComplete (mf=%p, cmdPtr=%p, idx=%d)\n",
-				ioc->name, (void *)mf, (void *) hd->cmdPtr, req_idx);
-	}
-	hd->cmdPtr = NULL;
-
-	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScanDvComplete (mf=%p,mr=%p,idx=%d)\n",
-			ioc->name, mf, mr, req_idx));
-
-	hd->pLocal = &hd->localReply;
-	hd->pLocal->scsiStatus = 0;
-
-	/* If target struct exists, clear sense valid flag.
-	 */
-	if (mr == NULL) {
-		completionCode = MPT_SCANDV_GOOD;
-	} else {
-		SCSIIOReply_t	*pReply;
-		u16		 status;
-		u8		 scsi_status;
-
-		pReply = (SCSIIOReply_t *) mr;
-
-		status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
-		scsi_status = pReply->SCSIStatus;
-
-
-		switch(status) {
-
-		case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:	/* 0x0043 */
-			completionCode = MPT_SCANDV_SELECTION_TIMEOUT;
-			break;
-
-		case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:		/* 0x0046 */
-		case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
-		case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:		/* 0x004B */
-		case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
-			completionCode = MPT_SCANDV_DID_RESET;
-			break;
-
-		case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:		/* 0x0045 */
-		case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
-		case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
-			if (pReply->Function == MPI_FUNCTION_CONFIG) {
-				ConfigReply_t *pr = (ConfigReply_t *)mr;
-				completionCode = MPT_SCANDV_GOOD;
-				hd->pLocal->header.PageVersion = pr->Header.PageVersion;
-				hd->pLocal->header.PageLength = pr->Header.PageLength;
-				hd->pLocal->header.PageNumber = pr->Header.PageNumber;
-				hd->pLocal->header.PageType = pr->Header.PageType;
-
-			} else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
-				/* If the RAID Volume request is successful,
-				 * return GOOD, else indicate that
-				 * some type of error occurred.
-				 */
-				MpiRaidActionReply_t	*pr = (MpiRaidActionReply_t *)mr;
-				if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
-					completionCode = MPT_SCANDV_GOOD;
-				else
-					completionCode = MPT_SCANDV_SOME_ERROR;
-				memcpy(hd->pLocal->sense, pr, sizeof(hd->pLocal->sense));
-
-			} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
-				u8		*sense_data;
-				int		 sz;
-
-				/* save sense data in global structure
-				 */
-				completionCode = MPT_SCANDV_SENSE;
-				hd->pLocal->scsiStatus = scsi_status;
-				sense_data = ((u8 *)ioc->sense_buf_pool +
-					(req_idx * MPT_SENSE_BUFFER_ALLOC));
-
-				sz = min_t(int, pReq->SenseBufferLength,
-							SCSI_STD_SENSE_BYTES);
-				memcpy(hd->pLocal->sense, sense_data, sz);
-
-				ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "  Check Condition, sense ptr %p\n",
-				    ioc->name, sense_data));
-			} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
-				if (pReq->CDB[0] == INQUIRY)
-					completionCode = MPT_SCANDV_ISSUE_SENSE;
-				else
-					completionCode = MPT_SCANDV_DID_RESET;
-			}
-			else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
-				completionCode = MPT_SCANDV_DID_RESET;
-			else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
-				completionCode = MPT_SCANDV_DID_RESET;
-			else {
-				completionCode = MPT_SCANDV_GOOD;
-				hd->pLocal->scsiStatus = scsi_status;
-			}
-			break;
-
-		case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:		/* 0x0047 */
-			if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
-				completionCode = MPT_SCANDV_DID_RESET;
-			else
-				completionCode = MPT_SCANDV_SOME_ERROR;
-			break;
-
-		default:
-			completionCode = MPT_SCANDV_SOME_ERROR;
-			break;
-
-		}	/* switch(status) */
-
-	} /* end of address reply case */
-
-	hd->pLocal->completion = completionCode;
-
-	/* MF and RF are freed in mpt_interrupt
-	 */
-wakeup:
-	/* Free Chain buffers (will never chain) in scan or dv */
-	//mptscsih_freeChainBuffers(ioc, req_idx);
-
-	/*
-	 * Wake up the original calling thread
-	 */
-	hd->scandv_wait_done = 1;
-	wake_up(&hd->scandv_waitq);
-
+ out:
+	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING))
+		return 0;
+	ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+	complete(&ioc->internal_cmds.done);
 	return 1;
 }
 
@@ -3004,6 +2672,95 @@
 	return;
 }
 
+/**
+ *	mptscsih_get_completion_code -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@reply:
+ *	@cmd:
+ *
+ **/
+static int
+mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+				MPT_FRAME_HDR *reply)
+{
+	SCSIIOReply_t	*pReply;
+	MpiRaidActionReply_t *pr;
+	u8		 scsi_status;
+	u16		 status;
+	int		 completion_code;
+
+	pReply = (SCSIIOReply_t *)reply;
+	status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+	scsi_status = pReply->SCSIStatus;
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh,"
+	    "IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState,
+	    scsi_status, le32_to_cpu(pReply->IOCLogInfo)));
+
+	switch (status) {
+
+	case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:	/* 0x0043 */
+		completion_code = MPT_SCANDV_SELECTION_TIMEOUT;
+		break;
+
+	case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:		/* 0x0046 */
+	case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
+	case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:		/* 0x004B */
+	case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
+		completion_code = MPT_SCANDV_DID_RESET;
+		break;
+
+	case MPI_IOCSTATUS_BUSY:
+	case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
+		completion_code = MPT_SCANDV_BUSY;
+		break;
+
+	case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:		/* 0x0045 */
+	case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
+	case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
+		if (pReply->Function == MPI_FUNCTION_CONFIG) {
+			completion_code = MPT_SCANDV_GOOD;
+		} else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
+			pr = (MpiRaidActionReply_t *)reply;
+			if (le16_to_cpu(pr->ActionStatus) ==
+				MPI_RAID_ACTION_ASTATUS_SUCCESS)
+				completion_code = MPT_SCANDV_GOOD;
+			else
+				completion_code = MPT_SCANDV_SOME_ERROR;
+		} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)
+			completion_code = MPT_SCANDV_SENSE;
+		else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
+			if (req->u.scsireq.CDB[0] == INQUIRY)
+				completion_code = MPT_SCANDV_ISSUE_SENSE;
+			else
+				completion_code = MPT_SCANDV_DID_RESET;
+		} else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
+			completion_code = MPT_SCANDV_DID_RESET;
+		else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
+			completion_code = MPT_SCANDV_DID_RESET;
+		else if (scsi_status == MPI_SCSI_STATUS_BUSY)
+			completion_code = MPT_SCANDV_BUSY;
+		else
+			completion_code = MPT_SCANDV_GOOD;
+		break;
+
+	case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:		/* 0x0047 */
+		if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
+			completion_code = MPT_SCANDV_DID_RESET;
+		else
+			completion_code = MPT_SCANDV_SOME_ERROR;
+		break;
+	default:
+		completion_code = MPT_SCANDV_SOME_ERROR;
+		break;
+
+	}	/* switch(status) */
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "  completionCode set to %08xh\n", ioc->name, completion_code));
+	return completion_code;
+}
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
@@ -3030,22 +2787,27 @@
 {
 	MPT_FRAME_HDR	*mf;
 	SCSIIORequest_t	*pScsiReq;
-	SCSIIORequest_t	 ReqCopy;
 	int		 my_idx, ii, dir;
-	int		 rc, cmdTimeout;
-	int		in_isr;
+	int		 timeout;
 	char		 cmdLen;
 	char		 CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-	char		 cmd = io->cmd;
-	MPT_ADAPTER 	*ioc = hd->ioc;
+	u8		 cmd = io->cmd;
+	MPT_ADAPTER *ioc = hd->ioc;
+	int		 ret = 0;
+	unsigned long	 timeleft;
+	unsigned long	 flags;
 
-	in_isr = in_interrupt();
-	if (in_isr) {
-		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Internal SCSI IO request not allowed in ISR context!\n",
-					ioc->name));
-		return -EPERM;
+	/* don't send internal command during diag reset */
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"%s: busy with host reset\n", ioc->name, __func__));
+		return MPT_SCANDV_BUSY;
 	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
+	mutex_lock(&ioc->internal_cmds.mutex);
 
 	/* Set command specific information
 	 */
@@ -3055,13 +2817,13 @@
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
 		CDB[4] = io->size;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case TEST_UNIT_READY:
 		cmdLen = 6;
 		dir = MPI_SCSIIO_CONTROL_READ;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case START_STOP:
@@ -3069,7 +2831,7 @@
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
 		CDB[4] = 1;	/*Spin up the disk */
-		cmdTimeout = 15;
+		timeout = 15;
 		break;
 
 	case REQUEST_SENSE:
@@ -3077,7 +2839,7 @@
 		CDB[0] = cmd;
 		CDB[4] = io->size;
 		dir = MPI_SCSIIO_CONTROL_READ;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case READ_BUFFER:
@@ -3096,7 +2858,7 @@
 		CDB[6] = (io->size >> 16) & 0xFF;
 		CDB[7] = (io->size >>  8) & 0xFF;
 		CDB[8] = io->size & 0xFF;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case WRITE_BUFFER:
@@ -3111,21 +2873,21 @@
 		CDB[6] = (io->size >> 16) & 0xFF;
 		CDB[7] = (io->size >>  8) & 0xFF;
 		CDB[8] = io->size & 0xFF;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case RESERVE:
 		cmdLen = 6;
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case RELEASE:
 		cmdLen = 6;
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case SYNCHRONIZE_CACHE:
@@ -3133,20 +2895,23 @@
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
 //		CDB[1] = 0x02;	/* set immediate bit */
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	default:
 		/* Error Case */
-		return -EFAULT;
+		ret = -EFAULT;
+		goto out;
 	}
 
 	/* Get and Populate a free Frame
+	 * MsgContext set in mpt_get_msg_frame call
 	 */
 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "No msg frames!\n",
-		    ioc->name));
-		return -EBUSY;
+		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n",
+		    ioc->name, __func__));
+		ret = MPT_SCANDV_BUSY;
+		goto out;
 	}
 
 	pScsiReq = (SCSIIORequest_t *) mf;
@@ -3172,7 +2937,7 @@
 
 	pScsiReq->Reserved = 0;
 
-	pScsiReq->MsgFlags = mpt_msg_flags();
+	pScsiReq->MsgFlags = mpt_msg_flags(ioc);
 	/* MsgContext set in mpt_get_msg_fram call  */
 
 	int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
@@ -3184,74 +2949,58 @@
 
 	if (cmd == REQUEST_SENSE) {
 		pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
-		ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Untagged! 0x%2x\n",
-			ioc->name, cmd));
+		devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd));
 	}
 
-	for (ii=0; ii < 16; ii++)
+	for (ii = 0; ii < 16; ii++)
 		pScsiReq->CDB[ii] = CDB[ii];
 
 	pScsiReq->DataLength = cpu_to_le32(io->size);
 	pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
 					   + (my_idx * MPT_SENSE_BUFFER_ALLOC));
 
-	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Command 0x%x for (%d:%d:%d)\n",
-			ioc->name, cmd, io->channel, io->id, io->lun));
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%d\n",
+	    ioc->name, __func__, cmd, io->channel, io->id, io->lun));
 
-	if (dir == MPI_SCSIIO_CONTROL_READ) {
-		mpt_add_sge((char *) &pScsiReq->SGL,
-			MPT_SGE_FLAGS_SSIMPLE_READ | io->size,
-			io->data_dma);
-	} else {
-		mpt_add_sge((char *) &pScsiReq->SGL,
-			MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size,
-			io->data_dma);
-	}
+	if (dir == MPI_SCSIIO_CONTROL_READ)
+		ioc->add_sge((char *) &pScsiReq->SGL,
+		    MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma);
+	else
+		ioc->add_sge((char *) &pScsiReq->SGL,
+		    MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma);
 
-	/* The ISR will free the request frame, but we need
-	 * the information to initialize the target. Duplicate.
-	 */
-	memcpy(&ReqCopy, pScsiReq, sizeof(SCSIIORequest_t));
-
-	/* Issue this command after:
-	 *	finish init
-	 *	add timer
-	 * Wait until the reply has been received
-	 *  ScsiScanDvCtx callback function will
-	 *	set hd->pLocal;
-	 *	set scandv_wait_done and call wake_up
-	 */
-	hd->pLocal = NULL;
-	hd->timer.expires = jiffies + HZ*cmdTimeout;
-	hd->scandv_wait_done = 0;
-
-	/* Save cmd pointer, for resource free if timeout or
-	 * FW reload occurs
-	 */
-	hd->cmdPtr = mf;
-
-	add_timer(&hd->timer);
+	INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
 	mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
-	wait_event(hd->scandv_waitq, hd->scandv_wait_done);
-
-	if (hd->pLocal) {
-		rc = hd->pLocal->completion;
-		hd->pLocal->skip = 0;
-
-		/* Always set fatal error codes in some cases.
-		 */
-		if (rc == MPT_SCANDV_SELECTION_TIMEOUT)
-			rc = -ENXIO;
-		else if (rc == MPT_SCANDV_SOME_ERROR)
-			rc =  -rc;
-	} else {
-		rc = -EFAULT;
-		/* This should never happen. */
-		ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "_do_cmd: Null pLocal!!!\n",
-				ioc->name));
+	timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done,
+	    timeout*HZ);
+	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = MPT_SCANDV_DID_RESET;
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__,
+		    cmd));
+		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+			mpt_free_msg_frame(ioc, mf);
+			goto out;
+		}
+		if (!timeleft) {
+			printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+			    ioc->name, __func__);
+			mpt_HardResetHandler(ioc, CAN_SLEEP);
+			mpt_free_msg_frame(ioc, mf);
+		}
+		goto out;
 	}
 
-	return rc;
+	ret = ioc->internal_cmds.completion_code;
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n",
+			ioc->name, __func__, ret));
+
+ out:
+	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+	mutex_unlock(&ioc->internal_cmds.mutex);
+	return ret;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -3491,6 +3240,7 @@
 	&dev_attr_debug_level,
 	NULL,
 };
+
 EXPORT_SYMBOL(mptscsih_host_attrs);
 
 EXPORT_SYMBOL(mptscsih_remove);
@@ -3516,6 +3266,5 @@
 EXPORT_SYMBOL(mptscsih_ioc_reset);
 EXPORT_SYMBOL(mptscsih_change_queue_depth);
 EXPORT_SYMBOL(mptscsih_timer_expired);
-EXPORT_SYMBOL(mptscsih_TMHandler);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index 319aa30..eb3f677 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -60,6 +60,7 @@
 #define MPT_SCANDV_SELECTION_TIMEOUT	(0x00000008)
 #define MPT_SCANDV_ISSUE_SENSE		(0x00000010)
 #define MPT_SCANDV_FALLBACK		(0x00000020)
+#define MPT_SCANDV_BUSY			(0x00000040)
 
 #define MPT_SCANDV_MAX_RETRIES		(10)
 
@@ -89,6 +90,7 @@
 
 #endif
 
+
 typedef struct _internal_cmd {
 	char		*data;		/* data pointer */
 	dma_addr_t	data_dma;	/* data dma address */
@@ -112,6 +114,8 @@
 extern int mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int func);
 extern const char * mptscsih_info(struct Scsi_Host *SChost);
 extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *));
+extern int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel,
+	u8 id, int lun, int ctx2abort, ulong timeout);
 extern void mptscsih_slave_destroy(struct scsi_device *device);
 extern int mptscsih_slave_configure(struct scsi_device *device);
 extern int mptscsih_abort(struct scsi_cmnd * SCpnt);
@@ -126,7 +130,8 @@
 extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
 extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
 extern void mptscsih_timer_expired(unsigned long data);
-extern int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout);
 extern u8 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id);
 extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id);
 extern struct device_attribute *mptscsih_host_attrs[];
+extern struct scsi_cmnd	*mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
+extern void mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 6162014..c5b808f 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -300,7 +300,7 @@
 	flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
 		(IOCPage4Ptr->Header.PageLength + ii) * 4;
 
-	mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
+	ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
 
 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		"writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
@@ -614,19 +614,24 @@
 	spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0;
 }
 
-static int
+int
 mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id)
 {
+	MPT_ADAPTER	*ioc = hd->ioc;
 	MpiRaidActionRequest_t	*pReq;
 	MPT_FRAME_HDR		*mf;
-	MPT_ADAPTER *ioc = hd->ioc;
+	int			ret;
+	unsigned long 	 	timeleft;
+
+	mutex_lock(&ioc->internal_cmds.mutex);
 
 	/* Get and Populate a free Frame
 	 */
 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
-		ddvprintk(ioc, printk(MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n",
-					ioc->name));
-		return -EAGAIN;
+		dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT
+			"%s: no msg frames!\n", ioc->name, __func__));
+		ret = -EAGAIN;
+		goto out;
 	}
 	pReq = (MpiRaidActionRequest_t *)mf;
 	if (quiesce)
@@ -643,29 +648,36 @@
 	pReq->Reserved2 = 0;
 	pReq->ActionDataWord = 0; /* Reserved for this action */
 
-	mpt_add_sge((char *)&pReq->ActionDataSGE,
+	ioc->add_sge((char *)&pReq->ActionDataSGE,
 		MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
 
 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n",
 			ioc->name, pReq->Action, channel, id));
 
-	hd->pLocal = NULL;
-	hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */
-	hd->scandv_wait_done = 0;
-
-	/* Save cmd pointer, for resource free if timeout or
-	 * FW reload occurs
-	 */
-	hd->cmdPtr = mf;
-
-	add_timer(&hd->timer);
+	INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
 	mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
-	wait_event(hd->scandv_waitq, hd->scandv_wait_done);
+	timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 10*HZ);
+	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = -ETIME;
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n",
+		    ioc->name, __func__));
+		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		if (!timeleft) {
+			printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+			    ioc->name, __func__);
+			mpt_HardResetHandler(ioc, CAN_SLEEP);
+			mpt_free_msg_frame(ioc, mf);
+		}
+		goto out;
+	}
 
-	if ((hd->pLocal == NULL) || (hd->pLocal->completion != 0))
-		return -1;
+	ret = ioc->internal_cmds.completion_code;
 
-	return 0;
+ out:
+	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+	mutex_unlock(&ioc->internal_cmds.mutex);
+	return ret;
 }
 
 static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
@@ -1423,17 +1435,15 @@
 	 * A slightly different algorithm is required for
 	 * 64bit SGEs.
 	 */
-	scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	scale = ioc->req_sz/ioc->SGE_size;
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		numSGE = (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 60) / ioc->SGE_size;
 	} else {
 		numSGE = 1 + (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 64) / ioc->SGE_size;
 	}
 
 	if (numSGE < sh->sg_tablesize) {
@@ -1464,9 +1474,6 @@
 
 	/* Clear the TM flags
 	 */
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	hd->resetPending = 0;
 	hd->abortSCpnt = NULL;
 
 	/* Clear the pointer used to store
@@ -1493,8 +1500,6 @@
 		mpt_saf_te));
 	ioc->spi_data.noQas = 0;
 
-	init_waitqueue_head(&hd->scandv_waitq);
-	hd->scandv_wait_done = 0;
 	hd->last_queue_full = 0;
 	hd->spi_pending = 0;
 
@@ -1514,7 +1519,7 @@
 	 * issue internal bus reset
 	 */
 	if (ioc->spi_data.bus_reset)
-		mptscsih_TMHandler(hd,
+		mptscsih_IssueTaskMgmt(hd,
 		    MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
 		    0, 0, 0, 0, 5);
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 214a92d..f3c4a3b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2264,6 +2264,17 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called bnx2.  This is recommended.
 
+config CNIC
+	tristate "Broadcom CNIC support"
+	depends on BNX2
+	depends on UIO
+	help
+	  This driver supports offload features of Broadcom NetXtremeII
+	  gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cnic.  This is recommended.
+
 config SPIDER_NET
 	tristate "Spider Gigabit Ethernet driver"
 	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index a1c25cb..db30ebd 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -73,6 +73,7 @@
 obj-$(CONFIG_FEALNX) += fealnx.o
 obj-$(CONFIG_TIGON3) += tg3.o
 obj-$(CONFIG_BNX2) += bnx2.o
+obj-$(CONFIG_CNIC) += cnic.o
 obj-$(CONFIG_BNX2X) += bnx2x.o
 bnx2x-objs := bnx2x_main.o bnx2x_link.o
 spidernet-y += spider_net.o spider_net_ethtool.o
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index b0cb29d..3f5fcb0 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -49,6 +49,10 @@
 #include <linux/firmware.h>
 #include <linux/log2.h>
 
+#if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
+#define BCM_CNIC 1
+#include "cnic_if.h"
+#endif
 #include "bnx2.h"
 #include "bnx2_fw.h"
 
@@ -315,6 +319,158 @@
 	spin_unlock_bh(&bp->indirect_lock);
 }
 
+#ifdef BCM_CNIC
+static int
+bnx2_drv_ctl(struct net_device *dev, struct drv_ctl_info *info)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+	struct drv_ctl_io *io = &info->data.io;
+
+	switch (info->cmd) {
+	case DRV_CTL_IO_WR_CMD:
+		bnx2_reg_wr_ind(bp, io->offset, io->data);
+		break;
+	case DRV_CTL_IO_RD_CMD:
+		io->data = bnx2_reg_rd_ind(bp, io->offset);
+		break;
+	case DRV_CTL_CTX_WR_CMD:
+		bnx2_ctx_wr(bp, io->cid_addr, io->offset, io->data);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void bnx2_setup_cnic_irq_info(struct bnx2 *bp)
+{
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+	struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+	int sb_id;
+
+	if (bp->flags & BNX2_FLAG_USING_MSIX) {
+		cp->drv_state |= CNIC_DRV_STATE_USING_MSIX;
+		bnapi->cnic_present = 0;
+		sb_id = bp->irq_nvecs;
+		cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX;
+	} else {
+		cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX;
+		bnapi->cnic_tag = bnapi->last_status_idx;
+		bnapi->cnic_present = 1;
+		sb_id = 0;
+		cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX;
+	}
+
+	cp->irq_arr[0].vector = bp->irq_tbl[sb_id].vector;
+	cp->irq_arr[0].status_blk = (void *)
+		((unsigned long) bnapi->status_blk.msi +
+		(BNX2_SBLK_MSIX_ALIGN_SIZE * sb_id));
+	cp->irq_arr[0].status_blk_num = sb_id;
+	cp->num_irq = 1;
+}
+
+static int bnx2_register_cnic(struct net_device *dev, struct cnic_ops *ops,
+			      void *data)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	if (ops == NULL)
+		return -EINVAL;
+
+	if (cp->drv_state & CNIC_DRV_STATE_REGD)
+		return -EBUSY;
+
+	bp->cnic_data = data;
+	rcu_assign_pointer(bp->cnic_ops, ops);
+
+	cp->num_irq = 0;
+	cp->drv_state = CNIC_DRV_STATE_REGD;
+
+	bnx2_setup_cnic_irq_info(bp);
+
+	return 0;
+}
+
+static int bnx2_unregister_cnic(struct net_device *dev)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+	struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	cp->drv_state = 0;
+	bnapi->cnic_present = 0;
+	rcu_assign_pointer(bp->cnic_ops, NULL);
+	synchronize_rcu();
+	return 0;
+}
+
+struct cnic_eth_dev *bnx2_cnic_probe(struct net_device *dev)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	cp->drv_owner = THIS_MODULE;
+	cp->chip_id = bp->chip_id;
+	cp->pdev = bp->pdev;
+	cp->io_base = bp->regview;
+	cp->drv_ctl = bnx2_drv_ctl;
+	cp->drv_register_cnic = bnx2_register_cnic;
+	cp->drv_unregister_cnic = bnx2_unregister_cnic;
+
+	return cp;
+}
+EXPORT_SYMBOL(bnx2_cnic_probe);
+
+static void
+bnx2_cnic_stop(struct bnx2 *bp)
+{
+	struct cnic_ops *c_ops;
+	struct cnic_ctl_info info;
+
+	rcu_read_lock();
+	c_ops = rcu_dereference(bp->cnic_ops);
+	if (c_ops) {
+		info.cmd = CNIC_CTL_STOP_CMD;
+		c_ops->cnic_ctl(bp->cnic_data, &info);
+	}
+	rcu_read_unlock();
+}
+
+static void
+bnx2_cnic_start(struct bnx2 *bp)
+{
+	struct cnic_ops *c_ops;
+	struct cnic_ctl_info info;
+
+	rcu_read_lock();
+	c_ops = rcu_dereference(bp->cnic_ops);
+	if (c_ops) {
+		if (!(bp->flags & BNX2_FLAG_USING_MSIX)) {
+			struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+
+			bnapi->cnic_tag = bnapi->last_status_idx;
+		}
+		info.cmd = CNIC_CTL_START_CMD;
+		c_ops->cnic_ctl(bp->cnic_data, &info);
+	}
+	rcu_read_unlock();
+}
+
+#else
+
+static void
+bnx2_cnic_stop(struct bnx2 *bp)
+{
+}
+
+static void
+bnx2_cnic_start(struct bnx2 *bp)
+{
+}
+
+#endif
+
 static int
 bnx2_read_phy(struct bnx2 *bp, u32 reg, u32 *val)
 {
@@ -488,6 +644,7 @@
 static void
 bnx2_netif_stop(struct bnx2 *bp)
 {
+	bnx2_cnic_stop(bp);
 	bnx2_disable_int_sync(bp);
 	if (netif_running(bp->dev)) {
 		bnx2_napi_disable(bp);
@@ -504,6 +661,7 @@
 			netif_tx_wake_all_queues(bp->dev);
 			bnx2_napi_enable(bp);
 			bnx2_enable_int(bp);
+			bnx2_cnic_start(bp);
 		}
 	}
 }
@@ -3164,6 +3322,11 @@
 	if (bnx2_has_fast_work(bnapi))
 		return 1;
 
+#ifdef BCM_CNIC
+	if (bnapi->cnic_present && (bnapi->cnic_tag != sblk->status_idx))
+		return 1;
+#endif
+
 	if ((sblk->status_attn_bits & STATUS_ATTN_EVENTS) !=
 	    (sblk->status_attn_bits_ack & STATUS_ATTN_EVENTS))
 		return 1;
@@ -3193,6 +3356,23 @@
 	bp->idle_chk_status_idx = bnapi->last_status_idx;
 }
 
+#ifdef BCM_CNIC
+static void bnx2_poll_cnic(struct bnx2 *bp, struct bnx2_napi *bnapi)
+{
+	struct cnic_ops *c_ops;
+
+	if (!bnapi->cnic_present)
+		return;
+
+	rcu_read_lock();
+	c_ops = rcu_dereference(bp->cnic_ops);
+	if (c_ops)
+		bnapi->cnic_tag = c_ops->cnic_handler(bp->cnic_data,
+						      bnapi->status_blk.msi);
+	rcu_read_unlock();
+}
+#endif
+
 static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi)
 {
 	struct status_block *sblk = bnapi->status_blk.msi;
@@ -3267,6 +3447,10 @@
 
 		work_done = bnx2_poll_work(bp, bnapi, work_done, budget);
 
+#ifdef BCM_CNIC
+		bnx2_poll_cnic(bp, bnapi);
+#endif
+
 		/* bnapi->last_status_idx is used below to tell the hw how
 		 * much work has been processed, so we must read it before
 		 * checking for more work.
@@ -4632,8 +4816,11 @@
 	val = REG_RD(bp, BNX2_MQ_CONFIG);
 	val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE;
 	val |= BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256;
-	if (CHIP_ID(bp) == CHIP_ID_5709_A0 || CHIP_ID(bp) == CHIP_ID_5709_A1)
-		val |= BNX2_MQ_CONFIG_HALT_DIS;
+	if (CHIP_NUM(bp) == CHIP_NUM_5709) {
+		val |= BNX2_MQ_CONFIG_BIN_MQ_MODE;
+		if (CHIP_REV(bp) == CHIP_REV_Ax)
+			val |= BNX2_MQ_CONFIG_HALT_DIS;
+	}
 
 	REG_WR(bp, BNX2_MQ_CONFIG, val);
 
@@ -7471,7 +7658,7 @@
 	INIT_WORK(&bp->reset_task, bnx2_reset_task);
 
 	dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
-	mem_len = MB_GET_CID_ADDR(TX_TSS_CID + TX_MAX_TSS_RINGS);
+	mem_len = MB_GET_CID_ADDR(TX_TSS_CID + TX_MAX_TSS_RINGS + 1);
 	dev->mem_end = dev->mem_start + mem_len;
 	dev->irq = pdev->irq;
 
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 5b570e1..a1ff739 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -361,6 +361,9 @@
 #define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE	 (1<<28)
 
 #define BNX2_L2CTX_HOST_BDIDX				0x00000004
+#define BNX2_L2CTX_STATUSB_NUM_SHIFT			 16
+#define BNX2_L2CTX_STATUSB_NUM(sb_id)			 \
+	(((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_STATUSB_NUM_SHIFT) : 0)
 #define BNX2_L2CTX_HOST_BSEQ				0x00000008
 #define BNX2_L2CTX_NX_BSEQ				0x0000000c
 #define BNX2_L2CTX_NX_BDHADDR_HI			0x00000010
@@ -5900,6 +5903,7 @@
 #define BNX2_RXP_FTQ_CTL_CUR_DEPTH			 (0x3ffL<<22)
 
 #define BNX2_RXP_SCRATCH				0x000e0000
+#define BNX2_RXP_SCRATCH_RXP_FLOOD			 0x000e0024
 #define BNX2_RXP_SCRATCH_RSS_TBL_SZ			 0x000e0038
 #define BNX2_RXP_SCRATCH_RSS_TBL			 0x000e003c
 #define BNX2_RXP_SCRATCH_RSS_TBL_MAX_ENTRIES		 128
@@ -6678,6 +6682,11 @@
 	u32 			last_status_idx;
 	u32			int_num;
 
+#ifdef BCM_CNIC
+	u32			cnic_tag;
+	int			cnic_present;
+#endif
+
 	struct bnx2_rx_ring_info	rx_ring;
 	struct bnx2_tx_ring_info	tx_ring;
 };
@@ -6727,6 +6736,11 @@
 	int		tx_ring_size;
 	u32		tx_wake_thresh;
 
+#ifdef BCM_CNIC
+	struct cnic_ops		*cnic_ops;
+	void			*cnic_data;
+#endif
+
 	/* End of fields used in the performance code paths. */
 
 	unsigned int		current_interval;
@@ -6885,6 +6899,10 @@
 
 	u32			idle_chk_status_idx;
 
+#ifdef BCM_CNIC
+	struct cnic_eth_dev	cnic_eth_dev;
+#endif
+
 	const struct firmware	*mips_firmware;
 	const struct firmware	*rv2p_firmware;
 };
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
new file mode 100644
index 0000000..8d74037
--- /dev/null
+++ b/drivers/net/cnic.c
@@ -0,0 +1,2711 @@
+/* cnic.c: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Original skeleton written by: John(Zongxi) Chen (zongxi@broadcom.com)
+ * Modified and maintained by: Michael Chan <mchan@broadcom.com>
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/uio_driver.h>
+#include <linux/in.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define BCM_VLAN 1
+#endif
+#include <net/ip.h>
+#include <net/tcp.h>
+#include <net/route.h>
+#include <net/ipv6.h>
+#include <net/ip6_route.h>
+#include <scsi/iscsi_if.h>
+
+#include "cnic_if.h"
+#include "bnx2.h"
+#include "cnic.h"
+#include "cnic_defs.h"
+
+#define DRV_MODULE_NAME		"cnic"
+#define PFX DRV_MODULE_NAME	": "
+
+static char version[] __devinitdata =
+	"Broadcom NetXtreme II CNIC Driver " DRV_MODULE_NAME " v" CNIC_MODULE_VERSION " (" CNIC_MODULE_RELDATE ")\n";
+
+MODULE_AUTHOR("Michael Chan <mchan@broadcom.com> and John(Zongxi) "
+	      "Chen (zongxi@broadcom.com");
+MODULE_DESCRIPTION("Broadcom NetXtreme II CNIC Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CNIC_MODULE_VERSION);
+
+static LIST_HEAD(cnic_dev_list);
+static DEFINE_RWLOCK(cnic_dev_lock);
+static DEFINE_MUTEX(cnic_lock);
+
+static struct cnic_ulp_ops *cnic_ulp_tbl[MAX_CNIC_ULP_TYPE];
+
+static int cnic_service_bnx2(void *, void *);
+static int cnic_ctl(void *, struct cnic_ctl_info *);
+
+static struct cnic_ops cnic_bnx2_ops = {
+	.cnic_owner	= THIS_MODULE,
+	.cnic_handler	= cnic_service_bnx2,
+	.cnic_ctl	= cnic_ctl,
+};
+
+static void cnic_shutdown_bnx2_rx_ring(struct cnic_dev *);
+static void cnic_init_bnx2_tx_ring(struct cnic_dev *);
+static void cnic_init_bnx2_rx_ring(struct cnic_dev *);
+static int cnic_cm_set_pg(struct cnic_sock *);
+
+static int cnic_uio_open(struct uio_info *uinfo, struct inode *inode)
+{
+	struct cnic_dev *dev = uinfo->priv;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (cp->uio_dev != -1)
+		return -EBUSY;
+
+	cp->uio_dev = iminor(inode);
+
+	cnic_shutdown_bnx2_rx_ring(dev);
+
+	cnic_init_bnx2_tx_ring(dev);
+	cnic_init_bnx2_rx_ring(dev);
+
+	return 0;
+}
+
+static int cnic_uio_close(struct uio_info *uinfo, struct inode *inode)
+{
+	struct cnic_dev *dev = uinfo->priv;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	cp->uio_dev = -1;
+	return 0;
+}
+
+static inline void cnic_hold(struct cnic_dev *dev)
+{
+	atomic_inc(&dev->ref_count);
+}
+
+static inline void cnic_put(struct cnic_dev *dev)
+{
+	atomic_dec(&dev->ref_count);
+}
+
+static inline void csk_hold(struct cnic_sock *csk)
+{
+	atomic_inc(&csk->ref_count);
+}
+
+static inline void csk_put(struct cnic_sock *csk)
+{
+	atomic_dec(&csk->ref_count);
+}
+
+static struct cnic_dev *cnic_from_netdev(struct net_device *netdev)
+{
+	struct cnic_dev *cdev;
+
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(cdev, &cnic_dev_list, list) {
+		if (netdev == cdev->netdev) {
+			cnic_hold(cdev);
+			read_unlock(&cnic_dev_lock);
+			return cdev;
+		}
+	}
+	read_unlock(&cnic_dev_lock);
+	return NULL;
+}
+
+static void cnic_ctx_wr(struct cnic_dev *dev, u32 cid_addr, u32 off, u32 val)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_io *io = &info.data.io;
+
+	info.cmd = DRV_CTL_CTX_WR_CMD;
+	io->cid_addr = cid_addr;
+	io->offset = off;
+	io->data = val;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static void cnic_reg_wr_ind(struct cnic_dev *dev, u32 off, u32 val)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_io *io = &info.data.io;
+
+	info.cmd = DRV_CTL_IO_WR_CMD;
+	io->offset = off;
+	io->data = val;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static u32 cnic_reg_rd_ind(struct cnic_dev *dev, u32 off)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_io *io = &info.data.io;
+
+	info.cmd = DRV_CTL_IO_RD_CMD;
+	io->offset = off;
+	ethdev->drv_ctl(dev->netdev, &info);
+	return io->data;
+}
+
+static int cnic_in_use(struct cnic_sock *csk)
+{
+	return test_bit(SK_F_INUSE, &csk->flags);
+}
+
+static void cnic_kwq_completion(struct cnic_dev *dev, u32 count)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+
+	info.cmd = DRV_CTL_COMPLETION_CMD;
+	info.data.comp.comp_count = count;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static int cnic_send_nlmsg(struct cnic_local *cp, u32 type,
+			   struct cnic_sock *csk)
+{
+	struct iscsi_path path_req;
+	char *buf = NULL;
+	u16 len = 0;
+	u32 msg_type = ISCSI_KEVENT_IF_DOWN;
+	struct cnic_ulp_ops *ulp_ops;
+
+	if (cp->uio_dev == -1)
+		return -ENODEV;
+
+	if (csk) {
+		len = sizeof(path_req);
+		buf = (char *) &path_req;
+		memset(&path_req, 0, len);
+
+		msg_type = ISCSI_KEVENT_PATH_REQ;
+		path_req.handle = (u64) csk->l5_cid;
+		if (test_bit(SK_F_IPV6, &csk->flags)) {
+			memcpy(&path_req.dst.v6_addr, &csk->dst_ip[0],
+			       sizeof(struct in6_addr));
+			path_req.ip_addr_len = 16;
+		} else {
+			memcpy(&path_req.dst.v4_addr, &csk->dst_ip[0],
+			       sizeof(struct in_addr));
+			path_req.ip_addr_len = 4;
+		}
+		path_req.vlan_id = csk->vlan_id;
+		path_req.pmtu = csk->mtu;
+	}
+
+	rcu_read_lock();
+	ulp_ops = rcu_dereference(cp->ulp_ops[CNIC_ULP_ISCSI]);
+	if (ulp_ops)
+		ulp_ops->iscsi_nl_send_msg(cp->dev, msg_type, buf, len);
+	rcu_read_unlock();
+	return 0;
+}
+
+static int cnic_iscsi_nl_msg_recv(struct cnic_dev *dev, u32 msg_type,
+				  char *buf, u16 len)
+{
+	int rc = -EINVAL;
+
+	switch (msg_type) {
+	case ISCSI_UEVENT_PATH_UPDATE: {
+		struct cnic_local *cp;
+		u32 l5_cid;
+		struct cnic_sock *csk;
+		struct iscsi_path *path_resp;
+
+		if (len < sizeof(*path_resp))
+			break;
+
+		path_resp = (struct iscsi_path *) buf;
+		cp = dev->cnic_priv;
+		l5_cid = (u32) path_resp->handle;
+		if (l5_cid >= MAX_CM_SK_TBL_SZ)
+			break;
+
+		csk = &cp->csk_tbl[l5_cid];
+		csk_hold(csk);
+		if (cnic_in_use(csk)) {
+			memcpy(csk->ha, path_resp->mac_addr, 6);
+			if (test_bit(SK_F_IPV6, &csk->flags))
+				memcpy(&csk->src_ip[0], &path_resp->src.v6_addr,
+				       sizeof(struct in6_addr));
+			else
+				memcpy(&csk->src_ip[0], &path_resp->src.v4_addr,
+				       sizeof(struct in_addr));
+			if (is_valid_ether_addr(csk->ha))
+				cnic_cm_set_pg(csk);
+		}
+		csk_put(csk);
+		rc = 0;
+	}
+	}
+
+	return rc;
+}
+
+static int cnic_offld_prep(struct cnic_sock *csk)
+{
+	if (test_and_set_bit(SK_F_OFFLD_SCHED, &csk->flags))
+		return 0;
+
+	if (!test_bit(SK_F_CONNECT_START, &csk->flags)) {
+		clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+		return 0;
+	}
+
+	return 1;
+}
+
+static int cnic_close_prep(struct cnic_sock *csk)
+{
+	clear_bit(SK_F_CONNECT_START, &csk->flags);
+	smp_mb__after_clear_bit();
+
+	if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags)) {
+		while (test_and_set_bit(SK_F_OFFLD_SCHED, &csk->flags))
+			msleep(1);
+
+		return 1;
+	}
+	return 0;
+}
+
+static int cnic_abort_prep(struct cnic_sock *csk)
+{
+	clear_bit(SK_F_CONNECT_START, &csk->flags);
+	smp_mb__after_clear_bit();
+
+	while (test_and_set_bit(SK_F_OFFLD_SCHED, &csk->flags))
+		msleep(1);
+
+	if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags)) {
+		csk->state = L4_KCQE_OPCODE_VALUE_RESET_COMP;
+		return 1;
+	}
+
+	return 0;
+}
+
+int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
+{
+	struct cnic_dev *dev;
+
+	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+		printk(KERN_ERR PFX "cnic_register_driver: Bad type %d\n",
+		       ulp_type);
+		return -EINVAL;
+	}
+	mutex_lock(&cnic_lock);
+	if (cnic_ulp_tbl[ulp_type]) {
+		printk(KERN_ERR PFX "cnic_register_driver: Type %d has already "
+				    "been registered\n", ulp_type);
+		mutex_unlock(&cnic_lock);
+		return -EBUSY;
+	}
+
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(dev, &cnic_dev_list, list) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		clear_bit(ULP_F_INIT, &cp->ulp_flags[ulp_type]);
+	}
+	read_unlock(&cnic_dev_lock);
+
+	rcu_assign_pointer(cnic_ulp_tbl[ulp_type], ulp_ops);
+	mutex_unlock(&cnic_lock);
+
+	/* Prevent race conditions with netdev_event */
+	rtnl_lock();
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(dev, &cnic_dev_list, list) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[ulp_type]))
+			ulp_ops->cnic_init(dev);
+	}
+	read_unlock(&cnic_dev_lock);
+	rtnl_unlock();
+
+	return 0;
+}
+
+int cnic_unregister_driver(int ulp_type)
+{
+	struct cnic_dev *dev;
+
+	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+		printk(KERN_ERR PFX "cnic_unregister_driver: Bad type %d\n",
+		       ulp_type);
+		return -EINVAL;
+	}
+	mutex_lock(&cnic_lock);
+	if (!cnic_ulp_tbl[ulp_type]) {
+		printk(KERN_ERR PFX "cnic_unregister_driver: Type %d has not "
+				    "been registered\n", ulp_type);
+		goto out_unlock;
+	}
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(dev, &cnic_dev_list, list) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+			printk(KERN_ERR PFX "cnic_unregister_driver: Type %d "
+			       "still has devices registered\n", ulp_type);
+			read_unlock(&cnic_dev_lock);
+			goto out_unlock;
+		}
+	}
+	read_unlock(&cnic_dev_lock);
+
+	rcu_assign_pointer(cnic_ulp_tbl[ulp_type], NULL);
+
+	mutex_unlock(&cnic_lock);
+	synchronize_rcu();
+	return 0;
+
+out_unlock:
+	mutex_unlock(&cnic_lock);
+	return -EINVAL;
+}
+
+static int cnic_start_hw(struct cnic_dev *);
+static void cnic_stop_hw(struct cnic_dev *);
+
+static int cnic_register_device(struct cnic_dev *dev, int ulp_type,
+				void *ulp_ctx)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_ulp_ops *ulp_ops;
+
+	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+		printk(KERN_ERR PFX "cnic_register_device: Bad type %d\n",
+		       ulp_type);
+		return -EINVAL;
+	}
+	mutex_lock(&cnic_lock);
+	if (cnic_ulp_tbl[ulp_type] == NULL) {
+		printk(KERN_ERR PFX "cnic_register_device: Driver with type %d "
+				    "has not been registered\n", ulp_type);
+		mutex_unlock(&cnic_lock);
+		return -EAGAIN;
+	}
+	if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+		printk(KERN_ERR PFX "cnic_register_device: Type %d has already "
+		       "been registered to this device\n", ulp_type);
+		mutex_unlock(&cnic_lock);
+		return -EBUSY;
+	}
+
+	clear_bit(ULP_F_START, &cp->ulp_flags[ulp_type]);
+	cp->ulp_handle[ulp_type] = ulp_ctx;
+	ulp_ops = cnic_ulp_tbl[ulp_type];
+	rcu_assign_pointer(cp->ulp_ops[ulp_type], ulp_ops);
+	cnic_hold(dev);
+
+	if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		if (!test_and_set_bit(ULP_F_START, &cp->ulp_flags[ulp_type]))
+			ulp_ops->cnic_start(cp->ulp_handle[ulp_type]);
+
+	mutex_unlock(&cnic_lock);
+
+	return 0;
+
+}
+EXPORT_SYMBOL(cnic_register_driver);
+
+static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+		printk(KERN_ERR PFX "cnic_unregister_device: Bad type %d\n",
+		       ulp_type);
+		return -EINVAL;
+	}
+	mutex_lock(&cnic_lock);
+	if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+		rcu_assign_pointer(cp->ulp_ops[ulp_type], NULL);
+		cnic_put(dev);
+	} else {
+		printk(KERN_ERR PFX "cnic_unregister_device: device not "
+		       "registered to this ulp type %d\n", ulp_type);
+		mutex_unlock(&cnic_lock);
+		return -EINVAL;
+	}
+	mutex_unlock(&cnic_lock);
+
+	synchronize_rcu();
+
+	return 0;
+}
+EXPORT_SYMBOL(cnic_unregister_driver);
+
+static int cnic_init_id_tbl(struct cnic_id_tbl *id_tbl, u32 size, u32 start_id)
+{
+	id_tbl->start = start_id;
+	id_tbl->max = size;
+	id_tbl->next = 0;
+	spin_lock_init(&id_tbl->lock);
+	id_tbl->table = kzalloc(DIV_ROUND_UP(size, 32) * 4, GFP_KERNEL);
+	if (!id_tbl->table)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void cnic_free_id_tbl(struct cnic_id_tbl *id_tbl)
+{
+	kfree(id_tbl->table);
+	id_tbl->table = NULL;
+}
+
+static int cnic_alloc_id(struct cnic_id_tbl *id_tbl, u32 id)
+{
+	int ret = -1;
+
+	id -= id_tbl->start;
+	if (id >= id_tbl->max)
+		return ret;
+
+	spin_lock(&id_tbl->lock);
+	if (!test_bit(id, id_tbl->table)) {
+		set_bit(id, id_tbl->table);
+		ret = 0;
+	}
+	spin_unlock(&id_tbl->lock);
+	return ret;
+}
+
+/* Returns -1 if not successful */
+static u32 cnic_alloc_new_id(struct cnic_id_tbl *id_tbl)
+{
+	u32 id;
+
+	spin_lock(&id_tbl->lock);
+	id = find_next_zero_bit(id_tbl->table, id_tbl->max, id_tbl->next);
+	if (id >= id_tbl->max) {
+		id = -1;
+		if (id_tbl->next != 0) {
+			id = find_first_zero_bit(id_tbl->table, id_tbl->next);
+			if (id >= id_tbl->next)
+				id = -1;
+		}
+	}
+
+	if (id < id_tbl->max) {
+		set_bit(id, id_tbl->table);
+		id_tbl->next = (id + 1) & (id_tbl->max - 1);
+		id += id_tbl->start;
+	}
+
+	spin_unlock(&id_tbl->lock);
+
+	return id;
+}
+
+static void cnic_free_id(struct cnic_id_tbl *id_tbl, u32 id)
+{
+	if (id == -1)
+		return;
+
+	id -= id_tbl->start;
+	if (id >= id_tbl->max)
+		return;
+
+	clear_bit(id, id_tbl->table);
+}
+
+static void cnic_free_dma(struct cnic_dev *dev, struct cnic_dma *dma)
+{
+	int i;
+
+	if (!dma->pg_arr)
+		return;
+
+	for (i = 0; i < dma->num_pages; i++) {
+		if (dma->pg_arr[i]) {
+			pci_free_consistent(dev->pcidev, BCM_PAGE_SIZE,
+					    dma->pg_arr[i], dma->pg_map_arr[i]);
+			dma->pg_arr[i] = NULL;
+		}
+	}
+	if (dma->pgtbl) {
+		pci_free_consistent(dev->pcidev, dma->pgtbl_size,
+				    dma->pgtbl, dma->pgtbl_map);
+		dma->pgtbl = NULL;
+	}
+	kfree(dma->pg_arr);
+	dma->pg_arr = NULL;
+	dma->num_pages = 0;
+}
+
+static void cnic_setup_page_tbl(struct cnic_dev *dev, struct cnic_dma *dma)
+{
+	int i;
+	u32 *page_table = dma->pgtbl;
+
+	for (i = 0; i < dma->num_pages; i++) {
+		/* Each entry needs to be in big endian format. */
+		*page_table = (u32) ((u64) dma->pg_map_arr[i] >> 32);
+		page_table++;
+		*page_table = (u32) dma->pg_map_arr[i];
+		page_table++;
+	}
+}
+
+static int cnic_alloc_dma(struct cnic_dev *dev, struct cnic_dma *dma,
+			  int pages, int use_pg_tbl)
+{
+	int i, size;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	size = pages * (sizeof(void *) + sizeof(dma_addr_t));
+	dma->pg_arr = kzalloc(size, GFP_ATOMIC);
+	if (dma->pg_arr == NULL)
+		return -ENOMEM;
+
+	dma->pg_map_arr = (dma_addr_t *) (dma->pg_arr + pages);
+	dma->num_pages = pages;
+
+	for (i = 0; i < pages; i++) {
+		dma->pg_arr[i] = pci_alloc_consistent(dev->pcidev,
+						      BCM_PAGE_SIZE,
+						      &dma->pg_map_arr[i]);
+		if (dma->pg_arr[i] == NULL)
+			goto error;
+	}
+	if (!use_pg_tbl)
+		return 0;
+
+	dma->pgtbl_size = ((pages * 8) + BCM_PAGE_SIZE - 1) &
+			  ~(BCM_PAGE_SIZE - 1);
+	dma->pgtbl = pci_alloc_consistent(dev->pcidev, dma->pgtbl_size,
+					  &dma->pgtbl_map);
+	if (dma->pgtbl == NULL)
+		goto error;
+
+	cp->setup_pgtbl(dev, dma);
+
+	return 0;
+
+error:
+	cnic_free_dma(dev, dma);
+	return -ENOMEM;
+}
+
+static void cnic_free_resc(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i = 0;
+
+	if (cp->cnic_uinfo) {
+		cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+		while (cp->uio_dev != -1 && i < 15) {
+			msleep(100);
+			i++;
+		}
+		uio_unregister_device(cp->cnic_uinfo);
+		kfree(cp->cnic_uinfo);
+		cp->cnic_uinfo = NULL;
+	}
+
+	if (cp->l2_buf) {
+		pci_free_consistent(dev->pcidev, cp->l2_buf_size,
+				    cp->l2_buf, cp->l2_buf_map);
+		cp->l2_buf = NULL;
+	}
+
+	if (cp->l2_ring) {
+		pci_free_consistent(dev->pcidev, cp->l2_ring_size,
+				    cp->l2_ring, cp->l2_ring_map);
+		cp->l2_ring = NULL;
+	}
+
+	for (i = 0; i < cp->ctx_blks; i++) {
+		if (cp->ctx_arr[i].ctx) {
+			pci_free_consistent(dev->pcidev, cp->ctx_blk_size,
+					    cp->ctx_arr[i].ctx,
+					    cp->ctx_arr[i].mapping);
+			cp->ctx_arr[i].ctx = NULL;
+		}
+	}
+	kfree(cp->ctx_arr);
+	cp->ctx_arr = NULL;
+	cp->ctx_blks = 0;
+
+	cnic_free_dma(dev, &cp->gbl_buf_info);
+	cnic_free_dma(dev, &cp->conn_buf_info);
+	cnic_free_dma(dev, &cp->kwq_info);
+	cnic_free_dma(dev, &cp->kcq_info);
+	kfree(cp->iscsi_tbl);
+	cp->iscsi_tbl = NULL;
+	kfree(cp->ctx_tbl);
+	cp->ctx_tbl = NULL;
+
+	cnic_free_id_tbl(&cp->cid_tbl);
+}
+
+static int cnic_alloc_context(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	if (CHIP_NUM(cp) == CHIP_NUM_5709) {
+		int i, k, arr_size;
+
+		cp->ctx_blk_size = BCM_PAGE_SIZE;
+		cp->cids_per_blk = BCM_PAGE_SIZE / 128;
+		arr_size = BNX2_MAX_CID / cp->cids_per_blk *
+			   sizeof(struct cnic_ctx);
+		cp->ctx_arr = kzalloc(arr_size, GFP_KERNEL);
+		if (cp->ctx_arr == NULL)
+			return -ENOMEM;
+
+		k = 0;
+		for (i = 0; i < 2; i++) {
+			u32 j, reg, off, lo, hi;
+
+			if (i == 0)
+				off = BNX2_PG_CTX_MAP;
+			else
+				off = BNX2_ISCSI_CTX_MAP;
+
+			reg = cnic_reg_rd_ind(dev, off);
+			lo = reg >> 16;
+			hi = reg & 0xffff;
+			for (j = lo; j < hi; j += cp->cids_per_blk, k++)
+				cp->ctx_arr[k].cid = j;
+		}
+
+		cp->ctx_blks = k;
+		if (cp->ctx_blks >= (BNX2_MAX_CID / cp->cids_per_blk)) {
+			cp->ctx_blks = 0;
+			return -ENOMEM;
+		}
+
+		for (i = 0; i < cp->ctx_blks; i++) {
+			cp->ctx_arr[i].ctx =
+				pci_alloc_consistent(dev->pcidev, BCM_PAGE_SIZE,
+						     &cp->ctx_arr[i].mapping);
+			if (cp->ctx_arr[i].ctx == NULL)
+				return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+static int cnic_alloc_bnx2_resc(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct uio_info *uinfo;
+	int ret;
+
+	ret = cnic_alloc_dma(dev, &cp->kwq_info, KWQ_PAGE_CNT, 1);
+	if (ret)
+		goto error;
+	cp->kwq = (struct kwqe **) cp->kwq_info.pg_arr;
+
+	ret = cnic_alloc_dma(dev, &cp->kcq_info, KCQ_PAGE_CNT, 1);
+	if (ret)
+		goto error;
+	cp->kcq = (struct kcqe **) cp->kcq_info.pg_arr;
+
+	ret = cnic_alloc_context(dev);
+	if (ret)
+		goto error;
+
+	cp->l2_ring_size = 2 * BCM_PAGE_SIZE;
+	cp->l2_ring = pci_alloc_consistent(dev->pcidev, cp->l2_ring_size,
+					   &cp->l2_ring_map);
+	if (!cp->l2_ring)
+		goto error;
+
+	cp->l2_buf_size = (cp->l2_rx_ring_size + 1) * cp->l2_single_buf_size;
+	cp->l2_buf_size = PAGE_ALIGN(cp->l2_buf_size);
+	cp->l2_buf = pci_alloc_consistent(dev->pcidev, cp->l2_buf_size,
+					   &cp->l2_buf_map);
+	if (!cp->l2_buf)
+		goto error;
+
+	uinfo = kzalloc(sizeof(*uinfo), GFP_ATOMIC);
+	if (!uinfo)
+		goto error;
+
+	uinfo->mem[0].addr = dev->netdev->base_addr;
+	uinfo->mem[0].internal_addr = dev->regview;
+	uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start;
+	uinfo->mem[0].memtype = UIO_MEM_PHYS;
+
+	uinfo->mem[1].addr = (unsigned long) cp->status_blk & PAGE_MASK;
+	if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX)
+		uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE * 9;
+	else
+		uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE;
+	uinfo->mem[1].memtype = UIO_MEM_LOGICAL;
+
+	uinfo->mem[2].addr = (unsigned long) cp->l2_ring;
+	uinfo->mem[2].size = cp->l2_ring_size;
+	uinfo->mem[2].memtype = UIO_MEM_LOGICAL;
+
+	uinfo->mem[3].addr = (unsigned long) cp->l2_buf;
+	uinfo->mem[3].size = cp->l2_buf_size;
+	uinfo->mem[3].memtype = UIO_MEM_LOGICAL;
+
+	uinfo->name = "bnx2_cnic";
+	uinfo->version = CNIC_MODULE_VERSION;
+	uinfo->irq = UIO_IRQ_CUSTOM;
+
+	uinfo->open = cnic_uio_open;
+	uinfo->release = cnic_uio_close;
+
+	uinfo->priv = dev;
+
+	ret = uio_register_device(&dev->pcidev->dev, uinfo);
+	if (ret) {
+		kfree(uinfo);
+		goto error;
+	}
+
+	cp->cnic_uinfo = uinfo;
+
+	return 0;
+
+error:
+	cnic_free_resc(dev);
+	return ret;
+}
+
+static inline u32 cnic_kwq_avail(struct cnic_local *cp)
+{
+	return cp->max_kwq_idx -
+		((cp->kwq_prod_idx - cp->kwq_con_idx) & cp->max_kwq_idx);
+}
+
+static int cnic_submit_bnx2_kwqes(struct cnic_dev *dev, struct kwqe *wqes[],
+				  u32 num_wqes)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct kwqe *prod_qe;
+	u16 prod, sw_prod, i;
+
+	if (!test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		return -EAGAIN;		/* bnx2 is down */
+
+	spin_lock_bh(&cp->cnic_ulp_lock);
+	if (num_wqes > cnic_kwq_avail(cp) &&
+	    !(cp->cnic_local_flags & CNIC_LCL_FL_KWQ_INIT)) {
+		spin_unlock_bh(&cp->cnic_ulp_lock);
+		return -EAGAIN;
+	}
+
+	cp->cnic_local_flags &= ~CNIC_LCL_FL_KWQ_INIT;
+
+	prod = cp->kwq_prod_idx;
+	sw_prod = prod & MAX_KWQ_IDX;
+	for (i = 0; i < num_wqes; i++) {
+		prod_qe = &cp->kwq[KWQ_PG(sw_prod)][KWQ_IDX(sw_prod)];
+		memcpy(prod_qe, wqes[i], sizeof(struct kwqe));
+		prod++;
+		sw_prod = prod & MAX_KWQ_IDX;
+	}
+	cp->kwq_prod_idx = prod;
+
+	CNIC_WR16(dev, cp->kwq_io_addr, cp->kwq_prod_idx);
+
+	spin_unlock_bh(&cp->cnic_ulp_lock);
+	return 0;
+}
+
+static void service_kcqes(struct cnic_dev *dev, int num_cqes)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i, j;
+
+	i = 0;
+	j = 1;
+	while (num_cqes) {
+		struct cnic_ulp_ops *ulp_ops;
+		int ulp_type;
+		u32 kcqe_op_flag = cp->completed_kcq[i]->kcqe_op_flag;
+		u32 kcqe_layer = kcqe_op_flag & KCQE_FLAGS_LAYER_MASK;
+
+		if (unlikely(kcqe_op_flag & KCQE_RAMROD_COMPLETION))
+			cnic_kwq_completion(dev, 1);
+
+		while (j < num_cqes) {
+			u32 next_op = cp->completed_kcq[i + j]->kcqe_op_flag;
+
+			if ((next_op & KCQE_FLAGS_LAYER_MASK) != kcqe_layer)
+				break;
+
+			if (unlikely(next_op & KCQE_RAMROD_COMPLETION))
+				cnic_kwq_completion(dev, 1);
+			j++;
+		}
+
+		if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L5_RDMA)
+			ulp_type = CNIC_ULP_RDMA;
+		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L5_ISCSI)
+			ulp_type = CNIC_ULP_ISCSI;
+		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L4)
+			ulp_type = CNIC_ULP_L4;
+		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L2)
+			goto end;
+		else {
+			printk(KERN_ERR PFX "%s: Unknown type of KCQE(0x%x)\n",
+			       dev->netdev->name, kcqe_op_flag);
+			goto end;
+		}
+
+		rcu_read_lock();
+		ulp_ops = rcu_dereference(cp->ulp_ops[ulp_type]);
+		if (likely(ulp_ops)) {
+			ulp_ops->indicate_kcqes(cp->ulp_handle[ulp_type],
+						  cp->completed_kcq + i, j);
+		}
+		rcu_read_unlock();
+end:
+		num_cqes -= j;
+		i += j;
+		j = 1;
+	}
+	return;
+}
+
+static u16 cnic_bnx2_next_idx(u16 idx)
+{
+	return idx + 1;
+}
+
+static u16 cnic_bnx2_hw_idx(u16 idx)
+{
+	return idx;
+}
+
+static int cnic_get_kcqes(struct cnic_dev *dev, u16 hw_prod, u16 *sw_prod)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u16 i, ri, last;
+	struct kcqe *kcqe;
+	int kcqe_cnt = 0, last_cnt = 0;
+
+	i = ri = last = *sw_prod;
+	ri &= MAX_KCQ_IDX;
+
+	while ((i != hw_prod) && (kcqe_cnt < MAX_COMPLETED_KCQE)) {
+		kcqe = &cp->kcq[KCQ_PG(ri)][KCQ_IDX(ri)];
+		cp->completed_kcq[kcqe_cnt++] = kcqe;
+		i = cp->next_idx(i);
+		ri = i & MAX_KCQ_IDX;
+		if (likely(!(kcqe->kcqe_op_flag & KCQE_FLAGS_NEXT))) {
+			last_cnt = kcqe_cnt;
+			last = i;
+		}
+	}
+
+	*sw_prod = last;
+	return last_cnt;
+}
+
+static void cnic_chk_bnx2_pkt_rings(struct cnic_local *cp)
+{
+	u16 rx_cons = *cp->rx_cons_ptr;
+	u16 tx_cons = *cp->tx_cons_ptr;
+
+	if (cp->tx_cons != tx_cons || cp->rx_cons != rx_cons) {
+		cp->tx_cons = tx_cons;
+		cp->rx_cons = rx_cons;
+		uio_event_notify(cp->cnic_uinfo);
+	}
+}
+
+static int cnic_service_bnx2(void *data, void *status_blk)
+{
+	struct cnic_dev *dev = data;
+	struct status_block *sblk = status_blk;
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 status_idx = sblk->status_idx;
+	u16 hw_prod, sw_prod;
+	int kcqe_cnt;
+
+	if (unlikely(!test_bit(CNIC_F_CNIC_UP, &dev->flags)))
+		return status_idx;
+
+	cp->kwq_con_idx = *cp->kwq_con_idx_ptr;
+
+	hw_prod = sblk->status_completion_producer_index;
+	sw_prod = cp->kcq_prod_idx;
+	while (sw_prod != hw_prod) {
+		kcqe_cnt = cnic_get_kcqes(dev, hw_prod, &sw_prod);
+		if (kcqe_cnt == 0)
+			goto done;
+
+		service_kcqes(dev, kcqe_cnt);
+
+		/* Tell compiler that status_blk fields can change. */
+		barrier();
+		if (status_idx != sblk->status_idx) {
+			status_idx = sblk->status_idx;
+			cp->kwq_con_idx = *cp->kwq_con_idx_ptr;
+			hw_prod = sblk->status_completion_producer_index;
+		} else
+			break;
+	}
+
+done:
+	CNIC_WR16(dev, cp->kcq_io_addr, sw_prod);
+
+	cp->kcq_prod_idx = sw_prod;
+
+	cnic_chk_bnx2_pkt_rings(cp);
+	return status_idx;
+}
+
+static void cnic_service_bnx2_msix(unsigned long data)
+{
+	struct cnic_dev *dev = (struct cnic_dev *) data;
+	struct cnic_local *cp = dev->cnic_priv;
+	struct status_block_msix *status_blk = cp->bnx2_status_blk;
+	u32 status_idx = status_blk->status_idx;
+	u16 hw_prod, sw_prod;
+	int kcqe_cnt;
+
+	cp->kwq_con_idx = status_blk->status_cmd_consumer_index;
+
+	hw_prod = status_blk->status_completion_producer_index;
+	sw_prod = cp->kcq_prod_idx;
+	while (sw_prod != hw_prod) {
+		kcqe_cnt = cnic_get_kcqes(dev, hw_prod, &sw_prod);
+		if (kcqe_cnt == 0)
+			goto done;
+
+		service_kcqes(dev, kcqe_cnt);
+
+		/* Tell compiler that status_blk fields can change. */
+		barrier();
+		if (status_idx != status_blk->status_idx) {
+			status_idx = status_blk->status_idx;
+			cp->kwq_con_idx = status_blk->status_cmd_consumer_index;
+			hw_prod = status_blk->status_completion_producer_index;
+		} else
+			break;
+	}
+
+done:
+	CNIC_WR16(dev, cp->kcq_io_addr, sw_prod);
+	cp->kcq_prod_idx = sw_prod;
+
+	cnic_chk_bnx2_pkt_rings(cp);
+
+	cp->last_status_idx = status_idx;
+	CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
+		BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | cp->last_status_idx);
+}
+
+static irqreturn_t cnic_irq(int irq, void *dev_instance)
+{
+	struct cnic_dev *dev = dev_instance;
+	struct cnic_local *cp = dev->cnic_priv;
+	u16 prod = cp->kcq_prod_idx & MAX_KCQ_IDX;
+
+	if (cp->ack_int)
+		cp->ack_int(dev);
+
+	prefetch(cp->status_blk);
+	prefetch(&cp->kcq[KCQ_PG(prod)][KCQ_IDX(prod)]);
+
+	if (likely(test_bit(CNIC_F_CNIC_UP, &dev->flags)))
+		tasklet_schedule(&cp->cnic_irq_task);
+
+	return IRQ_HANDLED;
+}
+
+static void cnic_ulp_stop(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int if_type;
+
+	rcu_read_lock();
+	for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
+		struct cnic_ulp_ops *ulp_ops;
+
+		ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
+		if (!ulp_ops)
+			continue;
+
+		if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
+			ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
+	}
+	rcu_read_unlock();
+}
+
+static void cnic_ulp_start(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int if_type;
+
+	rcu_read_lock();
+	for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
+		struct cnic_ulp_ops *ulp_ops;
+
+		ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
+		if (!ulp_ops || !ulp_ops->cnic_start)
+			continue;
+
+		if (!test_and_set_bit(ULP_F_START, &cp->ulp_flags[if_type]))
+			ulp_ops->cnic_start(cp->ulp_handle[if_type]);
+	}
+	rcu_read_unlock();
+}
+
+static int cnic_ctl(void *data, struct cnic_ctl_info *info)
+{
+	struct cnic_dev *dev = data;
+
+	switch (info->cmd) {
+	case CNIC_CTL_STOP_CMD:
+		cnic_hold(dev);
+		mutex_lock(&cnic_lock);
+
+		cnic_ulp_stop(dev);
+		cnic_stop_hw(dev);
+
+		mutex_unlock(&cnic_lock);
+		cnic_put(dev);
+		break;
+	case CNIC_CTL_START_CMD:
+		cnic_hold(dev);
+		mutex_lock(&cnic_lock);
+
+		if (!cnic_start_hw(dev))
+			cnic_ulp_start(dev);
+
+		mutex_unlock(&cnic_lock);
+		cnic_put(dev);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void cnic_ulp_init(struct cnic_dev *dev)
+{
+	int i;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	rcu_read_lock();
+	for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
+		struct cnic_ulp_ops *ulp_ops;
+
+		ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
+		if (!ulp_ops || !ulp_ops->cnic_init)
+			continue;
+
+		if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[i]))
+			ulp_ops->cnic_init(dev);
+
+	}
+	rcu_read_unlock();
+}
+
+static void cnic_ulp_exit(struct cnic_dev *dev)
+{
+	int i;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	rcu_read_lock();
+	for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
+		struct cnic_ulp_ops *ulp_ops;
+
+		ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
+		if (!ulp_ops || !ulp_ops->cnic_exit)
+			continue;
+
+		if (test_and_clear_bit(ULP_F_INIT, &cp->ulp_flags[i]))
+			ulp_ops->cnic_exit(dev);
+
+	}
+	rcu_read_unlock();
+}
+
+static int cnic_cm_offload_pg(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_offload_pg *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_offload_pg *) &csk->kwqe1;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->op_code = L4_KWQE_OPCODE_VALUE_OFFLOAD_PG;
+	l4kwqe->flags =
+		L4_LAYER_CODE << L4_KWQ_OFFLOAD_PG_LAYER_CODE_SHIFT;
+	l4kwqe->l2hdr_nbytes = ETH_HLEN;
+
+	l4kwqe->da0 = csk->ha[0];
+	l4kwqe->da1 = csk->ha[1];
+	l4kwqe->da2 = csk->ha[2];
+	l4kwqe->da3 = csk->ha[3];
+	l4kwqe->da4 = csk->ha[4];
+	l4kwqe->da5 = csk->ha[5];
+
+	l4kwqe->sa0 = dev->mac_addr[0];
+	l4kwqe->sa1 = dev->mac_addr[1];
+	l4kwqe->sa2 = dev->mac_addr[2];
+	l4kwqe->sa3 = dev->mac_addr[3];
+	l4kwqe->sa4 = dev->mac_addr[4];
+	l4kwqe->sa5 = dev->mac_addr[5];
+
+	l4kwqe->etype = ETH_P_IP;
+	l4kwqe->ipid_count = DEF_IPID_COUNT;
+	l4kwqe->host_opaque = csk->l5_cid;
+
+	if (csk->vlan_id) {
+		l4kwqe->pg_flags |= L4_KWQ_OFFLOAD_PG_VLAN_TAGGING;
+		l4kwqe->vlan_tag = csk->vlan_id;
+		l4kwqe->l2hdr_nbytes += 4;
+	}
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_update_pg(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_update_pg *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_update_pg *) &csk->kwqe1;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->opcode = L4_KWQE_OPCODE_VALUE_UPDATE_PG;
+	l4kwqe->flags =
+		L4_LAYER_CODE << L4_KWQ_UPDATE_PG_LAYER_CODE_SHIFT;
+	l4kwqe->pg_cid = csk->pg_cid;
+
+	l4kwqe->da0 = csk->ha[0];
+	l4kwqe->da1 = csk->ha[1];
+	l4kwqe->da2 = csk->ha[2];
+	l4kwqe->da3 = csk->ha[3];
+	l4kwqe->da4 = csk->ha[4];
+	l4kwqe->da5 = csk->ha[5];
+
+	l4kwqe->pg_host_opaque = csk->l5_cid;
+	l4kwqe->pg_valids = L4_KWQ_UPDATE_PG_VALIDS_DA;
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_upload_pg(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_upload *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_upload *) &csk->kwqe1;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->opcode = L4_KWQE_OPCODE_VALUE_UPLOAD_PG;
+	l4kwqe->flags =
+		L4_LAYER_CODE << L4_KWQ_UPLOAD_LAYER_CODE_SHIFT;
+	l4kwqe->cid = csk->pg_cid;
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_conn_req(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_connect_req1 *l4kwqe1;
+	struct l4_kwq_connect_req2 *l4kwqe2;
+	struct l4_kwq_connect_req3 *l4kwqe3;
+	struct kwqe *wqes[3];
+	u8 tcp_flags = 0;
+	int num_wqes = 2;
+
+	l4kwqe1 = (struct l4_kwq_connect_req1 *) &csk->kwqe1;
+	l4kwqe2 = (struct l4_kwq_connect_req2 *) &csk->kwqe2;
+	l4kwqe3 = (struct l4_kwq_connect_req3 *) &csk->kwqe3;
+	memset(l4kwqe1, 0, sizeof(*l4kwqe1));
+	memset(l4kwqe2, 0, sizeof(*l4kwqe2));
+	memset(l4kwqe3, 0, sizeof(*l4kwqe3));
+
+	l4kwqe3->op_code = L4_KWQE_OPCODE_VALUE_CONNECT3;
+	l4kwqe3->flags =
+		L4_LAYER_CODE << L4_KWQ_CONNECT_REQ3_LAYER_CODE_SHIFT;
+	l4kwqe3->ka_timeout = csk->ka_timeout;
+	l4kwqe3->ka_interval = csk->ka_interval;
+	l4kwqe3->ka_max_probe_count = csk->ka_max_probe_count;
+	l4kwqe3->tos = csk->tos;
+	l4kwqe3->ttl = csk->ttl;
+	l4kwqe3->snd_seq_scale = csk->snd_seq_scale;
+	l4kwqe3->pmtu = csk->mtu;
+	l4kwqe3->rcv_buf = csk->rcv_buf;
+	l4kwqe3->snd_buf = csk->snd_buf;
+	l4kwqe3->seed = csk->seed;
+
+	wqes[0] = (struct kwqe *) l4kwqe1;
+	if (test_bit(SK_F_IPV6, &csk->flags)) {
+		wqes[1] = (struct kwqe *) l4kwqe2;
+		wqes[2] = (struct kwqe *) l4kwqe3;
+		num_wqes = 3;
+
+		l4kwqe1->conn_flags = L4_KWQ_CONNECT_REQ1_IP_V6;
+		l4kwqe2->op_code = L4_KWQE_OPCODE_VALUE_CONNECT2;
+		l4kwqe2->flags =
+			L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT |
+			L4_LAYER_CODE << L4_KWQ_CONNECT_REQ2_LAYER_CODE_SHIFT;
+		l4kwqe2->src_ip_v6_2 = be32_to_cpu(csk->src_ip[1]);
+		l4kwqe2->src_ip_v6_3 = be32_to_cpu(csk->src_ip[2]);
+		l4kwqe2->src_ip_v6_4 = be32_to_cpu(csk->src_ip[3]);
+		l4kwqe2->dst_ip_v6_2 = be32_to_cpu(csk->dst_ip[1]);
+		l4kwqe2->dst_ip_v6_3 = be32_to_cpu(csk->dst_ip[2]);
+		l4kwqe2->dst_ip_v6_4 = be32_to_cpu(csk->dst_ip[3]);
+		l4kwqe3->mss = l4kwqe3->pmtu - sizeof(struct ipv6hdr) -
+			       sizeof(struct tcphdr);
+	} else {
+		wqes[1] = (struct kwqe *) l4kwqe3;
+		l4kwqe3->mss = l4kwqe3->pmtu - sizeof(struct iphdr) -
+			       sizeof(struct tcphdr);
+	}
+
+	l4kwqe1->op_code = L4_KWQE_OPCODE_VALUE_CONNECT1;
+	l4kwqe1->flags =
+		(L4_LAYER_CODE << L4_KWQ_CONNECT_REQ1_LAYER_CODE_SHIFT) |
+		 L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT;
+	l4kwqe1->cid = csk->cid;
+	l4kwqe1->pg_cid = csk->pg_cid;
+	l4kwqe1->src_ip = be32_to_cpu(csk->src_ip[0]);
+	l4kwqe1->dst_ip = be32_to_cpu(csk->dst_ip[0]);
+	l4kwqe1->src_port = be16_to_cpu(csk->src_port);
+	l4kwqe1->dst_port = be16_to_cpu(csk->dst_port);
+	if (csk->tcp_flags & SK_TCP_NO_DELAY_ACK)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK;
+	if (csk->tcp_flags & SK_TCP_KEEP_ALIVE)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_KEEP_ALIVE;
+	if (csk->tcp_flags & SK_TCP_NAGLE)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE;
+	if (csk->tcp_flags & SK_TCP_TIMESTAMP)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_TIME_STAMP;
+	if (csk->tcp_flags & SK_TCP_SACK)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_SACK;
+	if (csk->tcp_flags & SK_TCP_SEG_SCALING)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_SEG_SCALING;
+
+	l4kwqe1->tcp_flags = tcp_flags;
+
+	return dev->submit_kwqes(dev, wqes, num_wqes);
+}
+
+static int cnic_cm_close_req(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_close_req *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_close_req *) &csk->kwqe2;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->op_code = L4_KWQE_OPCODE_VALUE_CLOSE;
+	l4kwqe->flags = L4_LAYER_CODE << L4_KWQ_CLOSE_REQ_LAYER_CODE_SHIFT;
+	l4kwqe->cid = csk->cid;
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_abort_req(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_reset_req *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_reset_req *) &csk->kwqe2;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->op_code = L4_KWQE_OPCODE_VALUE_RESET;
+	l4kwqe->flags = L4_LAYER_CODE << L4_KWQ_RESET_REQ_LAYER_CODE_SHIFT;
+	l4kwqe->cid = csk->cid;
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_create(struct cnic_dev *dev, int ulp_type, u32 cid,
+			  u32 l5_cid, struct cnic_sock **csk, void *context)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_sock *csk1;
+
+	if (l5_cid >= MAX_CM_SK_TBL_SZ)
+		return -EINVAL;
+
+	csk1 = &cp->csk_tbl[l5_cid];
+	if (atomic_read(&csk1->ref_count))
+		return -EAGAIN;
+
+	if (test_and_set_bit(SK_F_INUSE, &csk1->flags))
+		return -EBUSY;
+
+	csk1->dev = dev;
+	csk1->cid = cid;
+	csk1->l5_cid = l5_cid;
+	csk1->ulp_type = ulp_type;
+	csk1->context = context;
+
+	csk1->ka_timeout = DEF_KA_TIMEOUT;
+	csk1->ka_interval = DEF_KA_INTERVAL;
+	csk1->ka_max_probe_count = DEF_KA_MAX_PROBE_COUNT;
+	csk1->tos = DEF_TOS;
+	csk1->ttl = DEF_TTL;
+	csk1->snd_seq_scale = DEF_SND_SEQ_SCALE;
+	csk1->rcv_buf = DEF_RCV_BUF;
+	csk1->snd_buf = DEF_SND_BUF;
+	csk1->seed = DEF_SEED;
+
+	*csk = csk1;
+	return 0;
+}
+
+static void cnic_cm_cleanup(struct cnic_sock *csk)
+{
+	if (csk->src_port) {
+		struct cnic_dev *dev = csk->dev;
+		struct cnic_local *cp = dev->cnic_priv;
+
+		cnic_free_id(&cp->csk_port_tbl, csk->src_port);
+		csk->src_port = 0;
+	}
+}
+
+static void cnic_close_conn(struct cnic_sock *csk)
+{
+	if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags)) {
+		cnic_cm_upload_pg(csk);
+		clear_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags);
+	}
+	cnic_cm_cleanup(csk);
+}
+
+static int cnic_cm_destroy(struct cnic_sock *csk)
+{
+	if (!cnic_in_use(csk))
+		return -EINVAL;
+
+	csk_hold(csk);
+	clear_bit(SK_F_INUSE, &csk->flags);
+	smp_mb__after_clear_bit();
+	while (atomic_read(&csk->ref_count) != 1)
+		msleep(1);
+	cnic_cm_cleanup(csk);
+
+	csk->flags = 0;
+	csk_put(csk);
+	return 0;
+}
+
+static inline u16 cnic_get_vlan(struct net_device *dev,
+				struct net_device **vlan_dev)
+{
+	if (dev->priv_flags & IFF_802_1Q_VLAN) {
+		*vlan_dev = vlan_dev_real_dev(dev);
+		return vlan_dev_vlan_id(dev);
+	}
+	*vlan_dev = dev;
+	return 0;
+}
+
+static int cnic_get_v4_route(struct sockaddr_in *dst_addr,
+			     struct dst_entry **dst)
+{
+	struct flowi fl;
+	int err;
+	struct rtable *rt;
+
+	memset(&fl, 0, sizeof(fl));
+	fl.nl_u.ip4_u.daddr = dst_addr->sin_addr.s_addr;
+
+	err = ip_route_output_key(&init_net, &rt, &fl);
+	if (!err)
+		*dst = &rt->u.dst;
+	return err;
+}
+
+static int cnic_get_v6_route(struct sockaddr_in6 *dst_addr,
+			     struct dst_entry **dst)
+{
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+	struct flowi fl;
+
+	memset(&fl, 0, sizeof(fl));
+	ipv6_addr_copy(&fl.fl6_dst, &dst_addr->sin6_addr);
+	if (ipv6_addr_type(&fl.fl6_dst) & IPV6_ADDR_LINKLOCAL)
+		fl.oif = dst_addr->sin6_scope_id;
+
+	*dst = ip6_route_output(&init_net, NULL, &fl);
+	if (*dst)
+		return 0;
+#endif
+
+	return -ENETUNREACH;
+}
+
+static struct cnic_dev *cnic_cm_select_dev(struct sockaddr_in *dst_addr,
+					   int ulp_type)
+{
+	struct cnic_dev *dev = NULL;
+	struct dst_entry *dst;
+	struct net_device *netdev = NULL;
+	int err = -ENETUNREACH;
+
+	if (dst_addr->sin_family == AF_INET)
+		err = cnic_get_v4_route(dst_addr, &dst);
+	else if (dst_addr->sin_family == AF_INET6) {
+		struct sockaddr_in6 *dst_addr6 =
+			(struct sockaddr_in6 *) dst_addr;
+
+		err = cnic_get_v6_route(dst_addr6, &dst);
+	} else
+		return NULL;
+
+	if (err)
+		return NULL;
+
+	if (!dst->dev)
+		goto done;
+
+	cnic_get_vlan(dst->dev, &netdev);
+
+	dev = cnic_from_netdev(netdev);
+
+done:
+	dst_release(dst);
+	if (dev)
+		cnic_put(dev);
+	return dev;
+}
+
+static int cnic_resolve_addr(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	return cnic_send_nlmsg(cp, ISCSI_KEVENT_PATH_REQ, csk);
+}
+
+static int cnic_get_route(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct cnic_local *cp = dev->cnic_priv;
+	int is_v6, err, rc = -ENETUNREACH;
+	struct dst_entry *dst;
+	struct net_device *realdev;
+	u32 local_port;
+
+	if (saddr->local.v6.sin6_family == AF_INET6 &&
+	    saddr->remote.v6.sin6_family == AF_INET6)
+		is_v6 = 1;
+	else if (saddr->local.v4.sin_family == AF_INET &&
+		 saddr->remote.v4.sin_family == AF_INET)
+		is_v6 = 0;
+	else
+		return -EINVAL;
+
+	clear_bit(SK_F_IPV6, &csk->flags);
+
+	if (is_v6) {
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+		set_bit(SK_F_IPV6, &csk->flags);
+		err = cnic_get_v6_route(&saddr->remote.v6, &dst);
+		if (err)
+			return err;
+
+		if (!dst || dst->error || !dst->dev)
+			goto err_out;
+
+		memcpy(&csk->dst_ip[0], &saddr->remote.v6.sin6_addr,
+		       sizeof(struct in6_addr));
+		csk->dst_port = saddr->remote.v6.sin6_port;
+		local_port = saddr->local.v6.sin6_port;
+#else
+		return rc;
+#endif
+
+	} else {
+		err = cnic_get_v4_route(&saddr->remote.v4, &dst);
+		if (err)
+			return err;
+
+		if (!dst || dst->error || !dst->dev)
+			goto err_out;
+
+		csk->dst_ip[0] = saddr->remote.v4.sin_addr.s_addr;
+		csk->dst_port = saddr->remote.v4.sin_port;
+		local_port = saddr->local.v4.sin_port;
+	}
+
+	csk->vlan_id = cnic_get_vlan(dst->dev, &realdev);
+	if (realdev != dev->netdev)
+		goto err_out;
+
+	if (local_port >= CNIC_LOCAL_PORT_MIN &&
+	    local_port < CNIC_LOCAL_PORT_MAX) {
+		if (cnic_alloc_id(&cp->csk_port_tbl, local_port))
+			local_port = 0;
+	} else
+		local_port = 0;
+
+	if (!local_port) {
+		local_port = cnic_alloc_new_id(&cp->csk_port_tbl);
+		if (local_port == -1) {
+			rc = -ENOMEM;
+			goto err_out;
+		}
+	}
+	csk->src_port = local_port;
+
+	csk->mtu = dst_mtu(dst);
+	rc = 0;
+
+err_out:
+	dst_release(dst);
+	return rc;
+}
+
+static void cnic_init_csk_state(struct cnic_sock *csk)
+{
+	csk->state = 0;
+	clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+	clear_bit(SK_F_CLOSING, &csk->flags);
+}
+
+static int cnic_cm_connect(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
+{
+	int err = 0;
+
+	if (!cnic_in_use(csk))
+		return -EINVAL;
+
+	if (test_and_set_bit(SK_F_CONNECT_START, &csk->flags))
+		return -EINVAL;
+
+	cnic_init_csk_state(csk);
+
+	err = cnic_get_route(csk, saddr);
+	if (err)
+		goto err_out;
+
+	err = cnic_resolve_addr(csk, saddr);
+	if (!err)
+		return 0;
+
+err_out:
+	clear_bit(SK_F_CONNECT_START, &csk->flags);
+	return err;
+}
+
+static int cnic_cm_abort(struct cnic_sock *csk)
+{
+	struct cnic_local *cp = csk->dev->cnic_priv;
+	u32 opcode;
+
+	if (!cnic_in_use(csk))
+		return -EINVAL;
+
+	if (cnic_abort_prep(csk))
+		return cnic_cm_abort_req(csk);
+
+	/* Getting here means that we haven't started connect, or
+	 * connect was not successful.
+	 */
+
+	csk->state = L4_KCQE_OPCODE_VALUE_RESET_COMP;
+	if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags))
+		opcode = csk->state;
+	else
+		opcode = L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD;
+	cp->close_conn(csk, opcode);
+
+	return 0;
+}
+
+static int cnic_cm_close(struct cnic_sock *csk)
+{
+	if (!cnic_in_use(csk))
+		return -EINVAL;
+
+	if (cnic_close_prep(csk)) {
+		csk->state = L4_KCQE_OPCODE_VALUE_CLOSE_COMP;
+		return cnic_cm_close_req(csk);
+	}
+	return 0;
+}
+
+static void cnic_cm_upcall(struct cnic_local *cp, struct cnic_sock *csk,
+			   u8 opcode)
+{
+	struct cnic_ulp_ops *ulp_ops;
+	int ulp_type = csk->ulp_type;
+
+	rcu_read_lock();
+	ulp_ops = rcu_dereference(cp->ulp_ops[ulp_type]);
+	if (ulp_ops) {
+		if (opcode == L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE)
+			ulp_ops->cm_connect_complete(csk);
+		else if (opcode == L4_KCQE_OPCODE_VALUE_CLOSE_COMP)
+			ulp_ops->cm_close_complete(csk);
+		else if (opcode == L4_KCQE_OPCODE_VALUE_RESET_RECEIVED)
+			ulp_ops->cm_remote_abort(csk);
+		else if (opcode == L4_KCQE_OPCODE_VALUE_RESET_COMP)
+			ulp_ops->cm_abort_complete(csk);
+		else if (opcode == L4_KCQE_OPCODE_VALUE_CLOSE_RECEIVED)
+			ulp_ops->cm_remote_close(csk);
+	}
+	rcu_read_unlock();
+}
+
+static int cnic_cm_set_pg(struct cnic_sock *csk)
+{
+	if (cnic_offld_prep(csk)) {
+		if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags))
+			cnic_cm_update_pg(csk);
+		else
+			cnic_cm_offload_pg(csk);
+	}
+	return 0;
+}
+
+static void cnic_cm_process_offld_pg(struct cnic_dev *dev, struct l4_kcq *kcqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 l5_cid = kcqe->pg_host_opaque;
+	u8 opcode = kcqe->op_code;
+	struct cnic_sock *csk = &cp->csk_tbl[l5_cid];
+
+	csk_hold(csk);
+	if (!cnic_in_use(csk))
+		goto done;
+
+	if (opcode == L4_KCQE_OPCODE_VALUE_UPDATE_PG) {
+		clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+		goto done;
+	}
+	csk->pg_cid = kcqe->pg_cid;
+	set_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags);
+	cnic_cm_conn_req(csk);
+
+done:
+	csk_put(csk);
+}
+
+static void cnic_cm_process_kcqe(struct cnic_dev *dev, struct kcqe *kcqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct l4_kcq *l4kcqe = (struct l4_kcq *) kcqe;
+	u8 opcode = l4kcqe->op_code;
+	u32 l5_cid;
+	struct cnic_sock *csk;
+
+	if (opcode == L4_KCQE_OPCODE_VALUE_OFFLOAD_PG ||
+	    opcode == L4_KCQE_OPCODE_VALUE_UPDATE_PG) {
+		cnic_cm_process_offld_pg(dev, l4kcqe);
+		return;
+	}
+
+	l5_cid = l4kcqe->conn_id;
+	if (opcode & 0x80)
+		l5_cid = l4kcqe->cid;
+	if (l5_cid >= MAX_CM_SK_TBL_SZ)
+		return;
+
+	csk = &cp->csk_tbl[l5_cid];
+	csk_hold(csk);
+
+	if (!cnic_in_use(csk)) {
+		csk_put(csk);
+		return;
+	}
+
+	switch (opcode) {
+	case L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE:
+		if (l4kcqe->status == 0)
+			set_bit(SK_F_OFFLD_COMPLETE, &csk->flags);
+
+		smp_mb__before_clear_bit();
+		clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+		cnic_cm_upcall(cp, csk, opcode);
+		break;
+
+	case L4_KCQE_OPCODE_VALUE_RESET_RECEIVED:
+		if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags))
+			csk->state = opcode;
+		/* fall through */
+	case L4_KCQE_OPCODE_VALUE_CLOSE_COMP:
+	case L4_KCQE_OPCODE_VALUE_RESET_COMP:
+		cp->close_conn(csk, opcode);
+		break;
+
+	case L4_KCQE_OPCODE_VALUE_CLOSE_RECEIVED:
+		cnic_cm_upcall(cp, csk, opcode);
+		break;
+	}
+	csk_put(csk);
+}
+
+static void cnic_cm_indicate_kcqe(void *data, struct kcqe *kcqe[], u32 num)
+{
+	struct cnic_dev *dev = data;
+	int i;
+
+	for (i = 0; i < num; i++)
+		cnic_cm_process_kcqe(dev, kcqe[i]);
+}
+
+static struct cnic_ulp_ops cm_ulp_ops = {
+	.indicate_kcqes		= cnic_cm_indicate_kcqe,
+};
+
+static void cnic_cm_free_mem(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	kfree(cp->csk_tbl);
+	cp->csk_tbl = NULL;
+	cnic_free_id_tbl(&cp->csk_port_tbl);
+}
+
+static int cnic_cm_alloc_mem(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	cp->csk_tbl = kzalloc(sizeof(struct cnic_sock) * MAX_CM_SK_TBL_SZ,
+			      GFP_KERNEL);
+	if (!cp->csk_tbl)
+		return -ENOMEM;
+
+	if (cnic_init_id_tbl(&cp->csk_port_tbl, CNIC_LOCAL_PORT_RANGE,
+			     CNIC_LOCAL_PORT_MIN)) {
+		cnic_cm_free_mem(dev);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int cnic_ready_to_close(struct cnic_sock *csk, u32 opcode)
+{
+	if ((opcode == csk->state) ||
+	    (opcode == L4_KCQE_OPCODE_VALUE_RESET_RECEIVED &&
+	     csk->state == L4_KCQE_OPCODE_VALUE_CLOSE_COMP)) {
+		if (!test_and_set_bit(SK_F_CLOSING, &csk->flags))
+			return 1;
+	}
+	return 0;
+}
+
+static void cnic_close_bnx2_conn(struct cnic_sock *csk, u32 opcode)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	clear_bit(SK_F_CONNECT_START, &csk->flags);
+	if (cnic_ready_to_close(csk, opcode)) {
+		cnic_close_conn(csk);
+		cnic_cm_upcall(cp, csk, opcode);
+	}
+}
+
+static void cnic_cm_stop_bnx2_hw(struct cnic_dev *dev)
+{
+}
+
+static int cnic_cm_init_bnx2_hw(struct cnic_dev *dev)
+{
+	u32 seed;
+
+	get_random_bytes(&seed, 4);
+	cnic_ctx_wr(dev, 45, 0, seed);
+	return 0;
+}
+
+static int cnic_cm_open(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int err;
+
+	err = cnic_cm_alloc_mem(dev);
+	if (err)
+		return err;
+
+	err = cp->start_cm(dev);
+
+	if (err)
+		goto err_out;
+
+	dev->cm_create = cnic_cm_create;
+	dev->cm_destroy = cnic_cm_destroy;
+	dev->cm_connect = cnic_cm_connect;
+	dev->cm_abort = cnic_cm_abort;
+	dev->cm_close = cnic_cm_close;
+	dev->cm_select_dev = cnic_cm_select_dev;
+
+	cp->ulp_handle[CNIC_ULP_L4] = dev;
+	rcu_assign_pointer(cp->ulp_ops[CNIC_ULP_L4], &cm_ulp_ops);
+	return 0;
+
+err_out:
+	cnic_cm_free_mem(dev);
+	return err;
+}
+
+static int cnic_cm_shutdown(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i;
+
+	cp->stop_cm(dev);
+
+	if (!cp->csk_tbl)
+		return 0;
+
+	for (i = 0; i < MAX_CM_SK_TBL_SZ; i++) {
+		struct cnic_sock *csk = &cp->csk_tbl[i];
+
+		clear_bit(SK_F_INUSE, &csk->flags);
+		cnic_cm_cleanup(csk);
+	}
+	cnic_cm_free_mem(dev);
+
+	return 0;
+}
+
+static void cnic_init_context(struct cnic_dev *dev, u32 cid)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 cid_addr;
+	int i;
+
+	if (CHIP_NUM(cp) == CHIP_NUM_5709)
+		return;
+
+	cid_addr = GET_CID_ADDR(cid);
+
+	for (i = 0; i < CTX_SIZE; i += 4)
+		cnic_ctx_wr(dev, cid_addr, i, 0);
+}
+
+static int cnic_setup_5709_context(struct cnic_dev *dev, int valid)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int ret = 0, i;
+	u32 valid_bit = valid ? BNX2_CTX_HOST_PAGE_TBL_DATA0_VALID : 0;
+
+	if (CHIP_NUM(cp) != CHIP_NUM_5709)
+		return 0;
+
+	for (i = 0; i < cp->ctx_blks; i++) {
+		int j;
+		u32 idx = cp->ctx_arr[i].cid / cp->cids_per_blk;
+		u32 val;
+
+		memset(cp->ctx_arr[i].ctx, 0, BCM_PAGE_SIZE);
+
+		CNIC_WR(dev, BNX2_CTX_HOST_PAGE_TBL_DATA0,
+			(cp->ctx_arr[i].mapping & 0xffffffff) | valid_bit);
+		CNIC_WR(dev, BNX2_CTX_HOST_PAGE_TBL_DATA1,
+			(u64) cp->ctx_arr[i].mapping >> 32);
+		CNIC_WR(dev, BNX2_CTX_HOST_PAGE_TBL_CTRL, idx |
+			BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ);
+		for (j = 0; j < 10; j++) {
+
+			val = CNIC_RD(dev, BNX2_CTX_HOST_PAGE_TBL_CTRL);
+			if (!(val & BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ))
+				break;
+			udelay(5);
+		}
+		if (val & BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ) {
+			ret = -EBUSY;
+			break;
+		}
+	}
+	return ret;
+}
+
+static void cnic_free_irq(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		cp->disable_int_sync(dev);
+		tasklet_disable(&cp->cnic_irq_task);
+		free_irq(ethdev->irq_arr[0].vector, dev);
+	}
+}
+
+static int cnic_init_bnx2_irq(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		int err, i = 0;
+		int sblk_num = cp->status_blk_num;
+		u32 base = ((sblk_num - 1) * BNX2_HC_SB_CONFIG_SIZE) +
+			   BNX2_HC_SB_CONFIG_1;
+
+		CNIC_WR(dev, base, BNX2_HC_SB_CONFIG_1_ONE_SHOT);
+
+		CNIC_WR(dev, base + BNX2_HC_COMP_PROD_TRIP_OFF, (2 << 16) | 8);
+		CNIC_WR(dev, base + BNX2_HC_COM_TICKS_OFF, (64 << 16) | 220);
+		CNIC_WR(dev, base + BNX2_HC_CMD_TICKS_OFF, (64 << 16) | 220);
+
+		cp->bnx2_status_blk = cp->status_blk;
+		cp->last_status_idx = cp->bnx2_status_blk->status_idx;
+		tasklet_init(&cp->cnic_irq_task, &cnic_service_bnx2_msix,
+			     (unsigned long) dev);
+		err = request_irq(ethdev->irq_arr[0].vector, cnic_irq, 0,
+				  "cnic", dev);
+		if (err) {
+			tasklet_disable(&cp->cnic_irq_task);
+			return err;
+		}
+		while (cp->bnx2_status_blk->status_completion_producer_index &&
+		       i < 10) {
+			CNIC_WR(dev, BNX2_HC_COALESCE_NOW,
+				1 << (11 + sblk_num));
+			udelay(10);
+			i++;
+			barrier();
+		}
+		if (cp->bnx2_status_blk->status_completion_producer_index) {
+			cnic_free_irq(dev);
+			goto failed;
+		}
+
+	} else {
+		struct status_block *sblk = cp->status_blk;
+		u32 hc_cmd = CNIC_RD(dev, BNX2_HC_COMMAND);
+		int i = 0;
+
+		while (sblk->status_completion_producer_index && i < 10) {
+			CNIC_WR(dev, BNX2_HC_COMMAND,
+				hc_cmd | BNX2_HC_COMMAND_COAL_NOW_WO_INT);
+			udelay(10);
+			i++;
+			barrier();
+		}
+		if (sblk->status_completion_producer_index)
+			goto failed;
+
+	}
+	return 0;
+
+failed:
+	printk(KERN_ERR PFX "%s: " "KCQ index not resetting to 0.\n",
+	       dev->netdev->name);
+	return -EBUSY;
+}
+
+static void cnic_enable_bnx2_int(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (!(ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX))
+		return;
+
+	CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
+		BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | cp->last_status_idx);
+}
+
+static void cnic_disable_bnx2_int_sync(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (!(ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX))
+		return;
+
+	CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
+		BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
+	CNIC_RD(dev, BNX2_PCICFG_INT_ACK_CMD);
+	synchronize_irq(ethdev->irq_arr[0].vector);
+}
+
+static void cnic_init_bnx2_tx_ring(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	u32 cid_addr, tx_cid, sb_id;
+	u32 val, offset0, offset1, offset2, offset3;
+	int i;
+	struct tx_bd *txbd;
+	dma_addr_t buf_map;
+	struct status_block *s_blk = cp->status_blk;
+
+	sb_id = cp->status_blk_num;
+	tx_cid = 20;
+	cnic_init_context(dev, tx_cid);
+	cnic_init_context(dev, tx_cid + 1);
+	cp->tx_cons_ptr = &s_blk->status_tx_quick_consumer_index2;
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		struct status_block_msix *sblk = cp->status_blk;
+
+		tx_cid = TX_TSS_CID + sb_id - 1;
+		cnic_init_context(dev, tx_cid);
+		CNIC_WR(dev, BNX2_TSCH_TSS_CFG, (sb_id << 24) |
+			(TX_TSS_CID << 7));
+		cp->tx_cons_ptr = &sblk->status_tx_quick_consumer_index;
+	}
+	cp->tx_cons = *cp->tx_cons_ptr;
+
+	cid_addr = GET_CID_ADDR(tx_cid);
+	if (CHIP_NUM(cp) == CHIP_NUM_5709) {
+		u32 cid_addr2 = GET_CID_ADDR(tx_cid + 4) + 0x40;
+
+		for (i = 0; i < PHY_CTX_SIZE; i += 4)
+			cnic_ctx_wr(dev, cid_addr2, i, 0);
+
+		offset0 = BNX2_L2CTX_TYPE_XI;
+		offset1 = BNX2_L2CTX_CMD_TYPE_XI;
+		offset2 = BNX2_L2CTX_TBDR_BHADDR_HI_XI;
+		offset3 = BNX2_L2CTX_TBDR_BHADDR_LO_XI;
+	} else {
+		offset0 = BNX2_L2CTX_TYPE;
+		offset1 = BNX2_L2CTX_CMD_TYPE;
+		offset2 = BNX2_L2CTX_TBDR_BHADDR_HI;
+		offset3 = BNX2_L2CTX_TBDR_BHADDR_LO;
+	}
+	val = BNX2_L2CTX_TYPE_TYPE_L2 | BNX2_L2CTX_TYPE_SIZE_L2;
+	cnic_ctx_wr(dev, cid_addr, offset0, val);
+
+	val = BNX2_L2CTX_CMD_TYPE_TYPE_L2 | (8 << 16);
+	cnic_ctx_wr(dev, cid_addr, offset1, val);
+
+	txbd = (struct tx_bd *) cp->l2_ring;
+
+	buf_map = cp->l2_buf_map;
+	for (i = 0; i < MAX_TX_DESC_CNT; i++, txbd++) {
+		txbd->tx_bd_haddr_hi = (u64) buf_map >> 32;
+		txbd->tx_bd_haddr_lo = (u64) buf_map & 0xffffffff;
+	}
+	val = (u64) cp->l2_ring_map >> 32;
+	cnic_ctx_wr(dev, cid_addr, offset2, val);
+	txbd->tx_bd_haddr_hi = val;
+
+	val = (u64) cp->l2_ring_map & 0xffffffff;
+	cnic_ctx_wr(dev, cid_addr, offset3, val);
+	txbd->tx_bd_haddr_lo = val;
+}
+
+static void cnic_init_bnx2_rx_ring(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	u32 cid_addr, sb_id, val, coal_reg, coal_val;
+	int i;
+	struct rx_bd *rxbd;
+	struct status_block *s_blk = cp->status_blk;
+
+	sb_id = cp->status_blk_num;
+	cnic_init_context(dev, 2);
+	cp->rx_cons_ptr = &s_blk->status_rx_quick_consumer_index2;
+	coal_reg = BNX2_HC_COMMAND;
+	coal_val = CNIC_RD(dev, coal_reg);
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		struct status_block_msix *sblk = cp->status_blk;
+
+		cp->rx_cons_ptr = &sblk->status_rx_quick_consumer_index;
+		coal_reg = BNX2_HC_COALESCE_NOW;
+		coal_val = 1 << (11 + sb_id);
+	}
+	i = 0;
+	while (!(*cp->rx_cons_ptr != 0) && i < 10) {
+		CNIC_WR(dev, coal_reg, coal_val);
+		udelay(10);
+		i++;
+		barrier();
+	}
+	cp->rx_cons = *cp->rx_cons_ptr;
+
+	cid_addr = GET_CID_ADDR(2);
+	val = BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE |
+	      BNX2_L2CTX_CTX_TYPE_SIZE_L2 | (0x02 << 8);
+	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_CTX_TYPE, val);
+
+	if (sb_id == 0)
+		val = 2 << BNX2_L2CTX_STATUSB_NUM_SHIFT;
+	else
+		val = BNX2_L2CTX_STATUSB_NUM(sb_id);
+	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_HOST_BDIDX, val);
+
+	rxbd = (struct rx_bd *) (cp->l2_ring + BCM_PAGE_SIZE);
+	for (i = 0; i < MAX_RX_DESC_CNT; i++, rxbd++) {
+		dma_addr_t buf_map;
+		int n = (i % cp->l2_rx_ring_size) + 1;
+
+		buf_map = cp->l2_buf_map + (n * cp->l2_single_buf_size);
+		rxbd->rx_bd_len = cp->l2_single_buf_size;
+		rxbd->rx_bd_flags = RX_BD_FLAGS_START | RX_BD_FLAGS_END;
+		rxbd->rx_bd_haddr_hi = (u64) buf_map >> 32;
+		rxbd->rx_bd_haddr_lo = (u64) buf_map & 0xffffffff;
+	}
+	val = (u64) (cp->l2_ring_map + BCM_PAGE_SIZE) >> 32;
+	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_NX_BDHADDR_HI, val);
+	rxbd->rx_bd_haddr_hi = val;
+
+	val = (u64) (cp->l2_ring_map + BCM_PAGE_SIZE) & 0xffffffff;
+	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_NX_BDHADDR_LO, val);
+	rxbd->rx_bd_haddr_lo = val;
+
+	val = cnic_reg_rd_ind(dev, BNX2_RXP_SCRATCH_RXP_FLOOD);
+	cnic_reg_wr_ind(dev, BNX2_RXP_SCRATCH_RXP_FLOOD, val | (1 << 2));
+}
+
+static void cnic_shutdown_bnx2_rx_ring(struct cnic_dev *dev)
+{
+	struct kwqe *wqes[1], l2kwqe;
+
+	memset(&l2kwqe, 0, sizeof(l2kwqe));
+	wqes[0] = &l2kwqe;
+	l2kwqe.kwqe_op_flag = (L2_LAYER_CODE << KWQE_FLAGS_LAYER_SHIFT) |
+			      (L2_KWQE_OPCODE_VALUE_FLUSH <<
+			       KWQE_OPCODE_SHIFT) | 2;
+	dev->submit_kwqes(dev, wqes, 1);
+}
+
+static void cnic_set_bnx2_mac(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 val;
+
+	val = cp->func << 2;
+
+	cp->shmem_base = cnic_reg_rd_ind(dev, BNX2_SHM_HDR_ADDR_0 + val);
+
+	val = cnic_reg_rd_ind(dev, cp->shmem_base +
+			      BNX2_PORT_HW_CFG_ISCSI_MAC_UPPER);
+	dev->mac_addr[0] = (u8) (val >> 8);
+	dev->mac_addr[1] = (u8) val;
+
+	CNIC_WR(dev, BNX2_EMAC_MAC_MATCH4, val);
+
+	val = cnic_reg_rd_ind(dev, cp->shmem_base +
+			      BNX2_PORT_HW_CFG_ISCSI_MAC_LOWER);
+	dev->mac_addr[2] = (u8) (val >> 24);
+	dev->mac_addr[3] = (u8) (val >> 16);
+	dev->mac_addr[4] = (u8) (val >> 8);
+	dev->mac_addr[5] = (u8) val;
+
+	CNIC_WR(dev, BNX2_EMAC_MAC_MATCH5, val);
+
+	val = 4 | BNX2_RPM_SORT_USER2_BC_EN;
+	if (CHIP_NUM(cp) != CHIP_NUM_5709)
+		val |= BNX2_RPM_SORT_USER2_PROM_VLAN;
+
+	CNIC_WR(dev, BNX2_RPM_SORT_USER2, 0x0);
+	CNIC_WR(dev, BNX2_RPM_SORT_USER2, val);
+	CNIC_WR(dev, BNX2_RPM_SORT_USER2, val | BNX2_RPM_SORT_USER2_ENA);
+}
+
+static int cnic_start_bnx2_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct status_block *sblk = cp->status_blk;
+	u32 val;
+	int err;
+
+	cnic_set_bnx2_mac(dev);
+
+	val = CNIC_RD(dev, BNX2_MQ_CONFIG);
+	val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE;
+	if (BCM_PAGE_BITS > 12)
+		val |= (12 - 8)  << 4;
+	else
+		val |= (BCM_PAGE_BITS - 8)  << 4;
+
+	CNIC_WR(dev, BNX2_MQ_CONFIG, val);
+
+	CNIC_WR(dev, BNX2_HC_COMP_PROD_TRIP, (2 << 16) | 8);
+	CNIC_WR(dev, BNX2_HC_COM_TICKS, (64 << 16) | 220);
+	CNIC_WR(dev, BNX2_HC_CMD_TICKS, (64 << 16) | 220);
+
+	err = cnic_setup_5709_context(dev, 1);
+	if (err)
+		return err;
+
+	cnic_init_context(dev, KWQ_CID);
+	cnic_init_context(dev, KCQ_CID);
+
+	cp->kwq_cid_addr = GET_CID_ADDR(KWQ_CID);
+	cp->kwq_io_addr = MB_GET_CID_ADDR(KWQ_CID) + L5_KRNLQ_HOST_QIDX;
+
+	cp->max_kwq_idx = MAX_KWQ_IDX;
+	cp->kwq_prod_idx = 0;
+	cp->kwq_con_idx = 0;
+	cp->cnic_local_flags |= CNIC_LCL_FL_KWQ_INIT;
+
+	if (CHIP_NUM(cp) == CHIP_NUM_5706 || CHIP_NUM(cp) == CHIP_NUM_5708)
+		cp->kwq_con_idx_ptr = &sblk->status_rx_quick_consumer_index15;
+	else
+		cp->kwq_con_idx_ptr = &sblk->status_cmd_consumer_index;
+
+	/* Initialize the kernel work queue context. */
+	val = KRNLQ_TYPE_TYPE_KRNLQ | KRNLQ_SIZE_TYPE_SIZE |
+	      (BCM_PAGE_BITS - 8) | KRNLQ_FLAGS_QE_SELF_SEQ;
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_TYPE, val);
+
+	val = (BCM_PAGE_SIZE / sizeof(struct kwqe) - 1) << 16;
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_QE_SELF_SEQ_MAX, val);
+
+	val = ((BCM_PAGE_SIZE / sizeof(struct kwqe)) << 16) | KWQ_PAGE_CNT;
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_PGTBL_NPAGES, val);
+
+	val = (u32) ((u64) cp->kwq_info.pgtbl_map >> 32);
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_PGTBL_HADDR_HI, val);
+
+	val = (u32) cp->kwq_info.pgtbl_map;
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_PGTBL_HADDR_LO, val);
+
+	cp->kcq_cid_addr = GET_CID_ADDR(KCQ_CID);
+	cp->kcq_io_addr = MB_GET_CID_ADDR(KCQ_CID) + L5_KRNLQ_HOST_QIDX;
+
+	cp->kcq_prod_idx = 0;
+
+	/* Initialize the kernel complete queue context. */
+	val = KRNLQ_TYPE_TYPE_KRNLQ | KRNLQ_SIZE_TYPE_SIZE |
+	      (BCM_PAGE_BITS - 8) | KRNLQ_FLAGS_QE_SELF_SEQ;
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_TYPE, val);
+
+	val = (BCM_PAGE_SIZE / sizeof(struct kcqe) - 1) << 16;
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_QE_SELF_SEQ_MAX, val);
+
+	val = ((BCM_PAGE_SIZE / sizeof(struct kcqe)) << 16) | KCQ_PAGE_CNT;
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_PGTBL_NPAGES, val);
+
+	val = (u32) ((u64) cp->kcq_info.pgtbl_map >> 32);
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_PGTBL_HADDR_HI, val);
+
+	val = (u32) cp->kcq_info.pgtbl_map;
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_PGTBL_HADDR_LO, val);
+
+	cp->int_num = 0;
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		u32 sb_id = cp->status_blk_num;
+		u32 sb = BNX2_L2CTX_STATUSB_NUM(sb_id);
+
+		cp->int_num = sb_id << BNX2_PCICFG_INT_ACK_CMD_INT_NUM_SHIFT;
+		cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_HOST_QIDX, sb);
+		cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_HOST_QIDX, sb);
+	}
+
+	/* Enable Commnad Scheduler notification when we write to the
+	 * host producer index of the kernel contexts. */
+	CNIC_WR(dev, BNX2_MQ_KNL_CMD_MASK1, 2);
+
+	/* Enable Command Scheduler notification when we write to either
+	 * the Send Queue or Receive Queue producer indexes of the kernel
+	 * bypass contexts. */
+	CNIC_WR(dev, BNX2_MQ_KNL_BYP_CMD_MASK1, 7);
+	CNIC_WR(dev, BNX2_MQ_KNL_BYP_WRITE_MASK1, 7);
+
+	/* Notify COM when the driver post an application buffer. */
+	CNIC_WR(dev, BNX2_MQ_KNL_RX_V2P_MASK2, 0x2000);
+
+	/* Set the CP and COM doorbells.  These two processors polls the
+	 * doorbell for a non zero value before running.  This must be done
+	 * after setting up the kernel queue contexts. */
+	cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 1);
+	cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 1);
+
+	cnic_init_bnx2_tx_ring(dev);
+	cnic_init_bnx2_rx_ring(dev);
+
+	err = cnic_init_bnx2_irq(dev);
+	if (err) {
+		printk(KERN_ERR PFX "%s: cnic_init_irq failed\n",
+		       dev->netdev->name);
+		cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
+		cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 0);
+		return err;
+	}
+
+	return 0;
+}
+
+static int cnic_start_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	int err;
+
+	if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		return -EALREADY;
+
+	err = ethdev->drv_register_cnic(dev->netdev, cp->cnic_ops, dev);
+	if (err) {
+		printk(KERN_ERR PFX "%s: register_cnic failed\n",
+		       dev->netdev->name);
+		goto err2;
+	}
+
+	dev->regview = ethdev->io_base;
+	cp->chip_id = ethdev->chip_id;
+	pci_dev_get(dev->pcidev);
+	cp->func = PCI_FUNC(dev->pcidev->devfn);
+	cp->status_blk = ethdev->irq_arr[0].status_blk;
+	cp->status_blk_num = ethdev->irq_arr[0].status_blk_num;
+
+	err = cp->alloc_resc(dev);
+	if (err) {
+		printk(KERN_ERR PFX "%s: allocate resource failure\n",
+		       dev->netdev->name);
+		goto err1;
+	}
+
+	err = cp->start_hw(dev);
+	if (err)
+		goto err1;
+
+	err = cnic_cm_open(dev);
+	if (err)
+		goto err1;
+
+	set_bit(CNIC_F_CNIC_UP, &dev->flags);
+
+	cp->enable_int(dev);
+
+	return 0;
+
+err1:
+	ethdev->drv_unregister_cnic(dev->netdev);
+	cp->free_resc(dev);
+	pci_dev_put(dev->pcidev);
+err2:
+	return err;
+}
+
+static void cnic_stop_bnx2_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	cnic_disable_bnx2_int_sync(dev);
+
+	cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
+	cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 0);
+
+	cnic_init_context(dev, KWQ_CID);
+	cnic_init_context(dev, KCQ_CID);
+
+	cnic_setup_5709_context(dev, 0);
+	cnic_free_irq(dev);
+
+	ethdev->drv_unregister_cnic(dev->netdev);
+
+	cnic_free_resc(dev);
+}
+
+static void cnic_stop_hw(struct cnic_dev *dev)
+{
+	if (test_bit(CNIC_F_CNIC_UP, &dev->flags)) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		clear_bit(CNIC_F_CNIC_UP, &dev->flags);
+		rcu_assign_pointer(cp->ulp_ops[CNIC_ULP_L4], NULL);
+		synchronize_rcu();
+		cnic_cm_shutdown(dev);
+		cp->stop_hw(dev);
+		pci_dev_put(dev->pcidev);
+	}
+}
+
+static void cnic_free_dev(struct cnic_dev *dev)
+{
+	int i = 0;
+
+	while ((atomic_read(&dev->ref_count) != 0) && i < 10) {
+		msleep(100);
+		i++;
+	}
+	if (atomic_read(&dev->ref_count) != 0)
+		printk(KERN_ERR PFX "%s: Failed waiting for ref count to go"
+				    " to zero.\n", dev->netdev->name);
+
+	printk(KERN_INFO PFX "Removed CNIC device: %s\n", dev->netdev->name);
+	dev_put(dev->netdev);
+	kfree(dev);
+}
+
+static struct cnic_dev *cnic_alloc_dev(struct net_device *dev,
+				       struct pci_dev *pdev)
+{
+	struct cnic_dev *cdev;
+	struct cnic_local *cp;
+	int alloc_size;
+
+	alloc_size = sizeof(struct cnic_dev) + sizeof(struct cnic_local);
+
+	cdev = kzalloc(alloc_size , GFP_KERNEL);
+	if (cdev == NULL) {
+		printk(KERN_ERR PFX "%s: allocate dev struct failure\n",
+		       dev->name);
+		return NULL;
+	}
+
+	cdev->netdev = dev;
+	cdev->cnic_priv = (char *)cdev + sizeof(struct cnic_dev);
+	cdev->register_device = cnic_register_device;
+	cdev->unregister_device = cnic_unregister_device;
+	cdev->iscsi_nl_msg_recv = cnic_iscsi_nl_msg_recv;
+
+	cp = cdev->cnic_priv;
+	cp->dev = cdev;
+	cp->uio_dev = -1;
+	cp->l2_single_buf_size = 0x400;
+	cp->l2_rx_ring_size = 3;
+
+	spin_lock_init(&cp->cnic_ulp_lock);
+
+	printk(KERN_INFO PFX "Added CNIC device: %s\n", dev->name);
+
+	return cdev;
+}
+
+static struct cnic_dev *init_bnx2_cnic(struct net_device *dev)
+{
+	struct pci_dev *pdev;
+	struct cnic_dev *cdev;
+	struct cnic_local *cp;
+	struct cnic_eth_dev *ethdev = NULL;
+	struct cnic_eth_dev *(*probe)(void *) = NULL;
+
+	probe = __symbol_get("bnx2_cnic_probe");
+	if (probe) {
+		ethdev = (*probe)(dev);
+		symbol_put_addr(probe);
+	}
+	if (!ethdev)
+		return NULL;
+
+	pdev = ethdev->pdev;
+	if (!pdev)
+		return NULL;
+
+	dev_hold(dev);
+	pci_dev_get(pdev);
+	if (pdev->device == PCI_DEVICE_ID_NX2_5709 ||
+	    pdev->device == PCI_DEVICE_ID_NX2_5709S) {
+		u8 rev;
+
+		pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
+		if (rev < 0x10) {
+			pci_dev_put(pdev);
+			goto cnic_err;
+		}
+	}
+	pci_dev_put(pdev);
+
+	cdev = cnic_alloc_dev(dev, pdev);
+	if (cdev == NULL)
+		goto cnic_err;
+
+	set_bit(CNIC_F_BNX2_CLASS, &cdev->flags);
+	cdev->submit_kwqes = cnic_submit_bnx2_kwqes;
+
+	cp = cdev->cnic_priv;
+	cp->ethdev = ethdev;
+	cdev->pcidev = pdev;
+
+	cp->cnic_ops = &cnic_bnx2_ops;
+	cp->start_hw = cnic_start_bnx2_hw;
+	cp->stop_hw = cnic_stop_bnx2_hw;
+	cp->setup_pgtbl = cnic_setup_page_tbl;
+	cp->alloc_resc = cnic_alloc_bnx2_resc;
+	cp->free_resc = cnic_free_resc;
+	cp->start_cm = cnic_cm_init_bnx2_hw;
+	cp->stop_cm = cnic_cm_stop_bnx2_hw;
+	cp->enable_int = cnic_enable_bnx2_int;
+	cp->disable_int_sync = cnic_disable_bnx2_int_sync;
+	cp->close_conn = cnic_close_bnx2_conn;
+	cp->next_idx = cnic_bnx2_next_idx;
+	cp->hw_idx = cnic_bnx2_hw_idx;
+	return cdev;
+
+cnic_err:
+	dev_put(dev);
+	return NULL;
+}
+
+static struct cnic_dev *is_cnic_dev(struct net_device *dev)
+{
+	struct ethtool_drvinfo drvinfo;
+	struct cnic_dev *cdev = NULL;
+
+	if (dev->ethtool_ops && dev->ethtool_ops->get_drvinfo) {
+		memset(&drvinfo, 0, sizeof(drvinfo));
+		dev->ethtool_ops->get_drvinfo(dev, &drvinfo);
+
+		if (!strcmp(drvinfo.driver, "bnx2"))
+			cdev = init_bnx2_cnic(dev);
+		if (cdev) {
+			write_lock(&cnic_dev_lock);
+			list_add(&cdev->list, &cnic_dev_list);
+			write_unlock(&cnic_dev_lock);
+		}
+	}
+	return cdev;
+}
+
+/**
+ * netdev event handler
+ */
+static int cnic_netdev_event(struct notifier_block *this, unsigned long event,
+							 void *ptr)
+{
+	struct net_device *netdev = ptr;
+	struct cnic_dev *dev;
+	int if_type;
+	int new_dev = 0;
+
+	dev = cnic_from_netdev(netdev);
+
+	if (!dev && (event == NETDEV_REGISTER || event == NETDEV_UP)) {
+		/* Check for the hot-plug device */
+		dev = is_cnic_dev(netdev);
+		if (dev) {
+			new_dev = 1;
+			cnic_hold(dev);
+		}
+	}
+	if (dev) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (new_dev)
+			cnic_ulp_init(dev);
+		else if (event == NETDEV_UNREGISTER)
+			cnic_ulp_exit(dev);
+		else if (event == NETDEV_UP) {
+			mutex_lock(&cnic_lock);
+			if (!cnic_start_hw(dev))
+				cnic_ulp_start(dev);
+			mutex_unlock(&cnic_lock);
+		}
+
+		rcu_read_lock();
+		for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
+			struct cnic_ulp_ops *ulp_ops;
+			void *ctx;
+
+			ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
+			if (!ulp_ops || !ulp_ops->indicate_netevent)
+				continue;
+
+			ctx = cp->ulp_handle[if_type];
+
+			ulp_ops->indicate_netevent(ctx, event);
+		}
+		rcu_read_unlock();
+
+		if (event == NETDEV_GOING_DOWN) {
+			mutex_lock(&cnic_lock);
+			cnic_ulp_stop(dev);
+			cnic_stop_hw(dev);
+			mutex_unlock(&cnic_lock);
+		} else if (event == NETDEV_UNREGISTER) {
+			write_lock(&cnic_dev_lock);
+			list_del_init(&dev->list);
+			write_unlock(&cnic_dev_lock);
+
+			cnic_put(dev);
+			cnic_free_dev(dev);
+			goto done;
+		}
+		cnic_put(dev);
+	}
+done:
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block cnic_netdev_notifier = {
+	.notifier_call = cnic_netdev_event
+};
+
+static void cnic_release(void)
+{
+	struct cnic_dev *dev;
+
+	while (!list_empty(&cnic_dev_list)) {
+		dev = list_entry(cnic_dev_list.next, struct cnic_dev, list);
+		if (test_bit(CNIC_F_CNIC_UP, &dev->flags)) {
+			cnic_ulp_stop(dev);
+			cnic_stop_hw(dev);
+		}
+
+		cnic_ulp_exit(dev);
+		list_del_init(&dev->list);
+		cnic_free_dev(dev);
+	}
+}
+
+static int __init cnic_init(void)
+{
+	int rc = 0;
+
+	printk(KERN_INFO "%s", version);
+
+	rc = register_netdevice_notifier(&cnic_netdev_notifier);
+	if (rc) {
+		cnic_release();
+		return rc;
+	}
+
+	return 0;
+}
+
+static void __exit cnic_exit(void)
+{
+	unregister_netdevice_notifier(&cnic_netdev_notifier);
+	cnic_release();
+	return;
+}
+
+module_init(cnic_init);
+module_exit(cnic_exit);
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
new file mode 100644
index 0000000..5192d4a
--- /dev/null
+++ b/drivers/net/cnic.h
@@ -0,0 +1,299 @@
+/* cnic.h: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ */
+
+
+#ifndef CNIC_H
+#define CNIC_H
+
+#define KWQ_PAGE_CNT	4
+#define KCQ_PAGE_CNT	16
+
+#define KWQ_CID 		24
+#define KCQ_CID 		25
+
+/*
+ *	krnlq_context definition
+ */
+#define L5_KRNLQ_FLAGS	0x00000000
+#define L5_KRNLQ_SIZE	0x00000000
+#define L5_KRNLQ_TYPE	0x00000000
+#define KRNLQ_FLAGS_PG_SZ					(0xf<<0)
+#define KRNLQ_FLAGS_PG_SZ_256					(0<<0)
+#define KRNLQ_FLAGS_PG_SZ_512					(1<<0)
+#define KRNLQ_FLAGS_PG_SZ_1K					(2<<0)
+#define KRNLQ_FLAGS_PG_SZ_2K					(3<<0)
+#define KRNLQ_FLAGS_PG_SZ_4K					(4<<0)
+#define KRNLQ_FLAGS_PG_SZ_8K					(5<<0)
+#define KRNLQ_FLAGS_PG_SZ_16K					(6<<0)
+#define KRNLQ_FLAGS_PG_SZ_32K					(7<<0)
+#define KRNLQ_FLAGS_PG_SZ_64K					(8<<0)
+#define KRNLQ_FLAGS_PG_SZ_128K					(9<<0)
+#define KRNLQ_FLAGS_PG_SZ_256K					(10<<0)
+#define KRNLQ_FLAGS_PG_SZ_512K					(11<<0)
+#define KRNLQ_FLAGS_PG_SZ_1M					(12<<0)
+#define KRNLQ_FLAGS_PG_SZ_2M					(13<<0)
+#define KRNLQ_FLAGS_QE_SELF_SEQ					(1<<15)
+#define KRNLQ_SIZE_TYPE_SIZE	((((0x28 + 0x1f) & ~0x1f) / 0x20) << 16)
+#define KRNLQ_TYPE_TYPE						(0xf<<28)
+#define KRNLQ_TYPE_TYPE_EMPTY					(0<<28)
+#define KRNLQ_TYPE_TYPE_KRNLQ					(6<<28)
+
+#define L5_KRNLQ_HOST_QIDX		0x00000004
+#define L5_KRNLQ_HOST_FW_QIDX		0x00000008
+#define L5_KRNLQ_NX_QE_SELF_SEQ 	0x0000000c
+#define L5_KRNLQ_QE_SELF_SEQ_MAX	0x0000000c
+#define L5_KRNLQ_NX_QE_HADDR_HI 	0x00000010
+#define L5_KRNLQ_NX_QE_HADDR_LO 	0x00000014
+#define L5_KRNLQ_PGTBL_PGIDX		0x00000018
+#define L5_KRNLQ_NX_PG_QIDX 		0x00000018
+#define L5_KRNLQ_PGTBL_NPAGES		0x0000001c
+#define L5_KRNLQ_QIDX_INCR		0x0000001c
+#define L5_KRNLQ_PGTBL_HADDR_HI 	0x00000020
+#define L5_KRNLQ_PGTBL_HADDR_LO 	0x00000024
+
+#define BNX2_PG_CTX_MAP			0x1a0034
+#define BNX2_ISCSI_CTX_MAP		0x1a0074
+
+struct cnic_redirect_entry {
+	struct dst_entry *old_dst;
+	struct dst_entry *new_dst;
+};
+
+#define MAX_COMPLETED_KCQE	64
+
+#define MAX_CNIC_L5_CONTEXT	256
+
+#define MAX_CM_SK_TBL_SZ	MAX_CNIC_L5_CONTEXT
+
+#define MAX_ISCSI_TBL_SZ	256
+
+#define CNIC_LOCAL_PORT_MIN	60000
+#define CNIC_LOCAL_PORT_MAX	61000
+#define CNIC_LOCAL_PORT_RANGE	(CNIC_LOCAL_PORT_MAX - CNIC_LOCAL_PORT_MIN)
+
+#define KWQE_CNT (BCM_PAGE_SIZE / sizeof(struct kwqe))
+#define KCQE_CNT (BCM_PAGE_SIZE / sizeof(struct kcqe))
+#define MAX_KWQE_CNT (KWQE_CNT - 1)
+#define MAX_KCQE_CNT (KCQE_CNT - 1)
+
+#define MAX_KWQ_IDX	((KWQ_PAGE_CNT * KWQE_CNT) - 1)
+#define MAX_KCQ_IDX	((KCQ_PAGE_CNT * KCQE_CNT) - 1)
+
+#define KWQ_PG(x) (((x) & ~MAX_KWQE_CNT) >> (BCM_PAGE_BITS - 5))
+#define KWQ_IDX(x) ((x) & MAX_KWQE_CNT)
+
+#define KCQ_PG(x) (((x) & ~MAX_KCQE_CNT) >> (BCM_PAGE_BITS - 5))
+#define KCQ_IDX(x) ((x) & MAX_KCQE_CNT)
+
+#define BNX2X_NEXT_KCQE(x) (((x) & (MAX_KCQE_CNT - 1)) ==		\
+		(MAX_KCQE_CNT - 1)) ?					\
+		(x) + 2 : (x) + 1
+
+#define BNX2X_KWQ_DATA_PG(cp, x) ((x) / (cp)->kwq_16_data_pp)
+#define BNX2X_KWQ_DATA_IDX(cp, x) ((x) % (cp)->kwq_16_data_pp)
+#define BNX2X_KWQ_DATA(cp, x)						\
+	&(cp)->kwq_16_data[BNX2X_KWQ_DATA_PG(cp, x)][BNX2X_KWQ_DATA_IDX(cp, x)]
+
+#define DEF_IPID_COUNT		0xc001
+
+#define DEF_KA_TIMEOUT		10000
+#define DEF_KA_INTERVAL		300000
+#define DEF_KA_MAX_PROBE_COUNT	3
+#define DEF_TOS			0
+#define DEF_TTL			0xfe
+#define DEF_SND_SEQ_SCALE	0
+#define DEF_RCV_BUF		0xffff
+#define DEF_SND_BUF		0xffff
+#define DEF_SEED		0
+#define DEF_MAX_RT_TIME		500
+#define DEF_MAX_DA_COUNT	2
+#define DEF_SWS_TIMER		1000
+#define DEF_MAX_CWND		0xffff
+
+struct cnic_ctx {
+	u32		cid;
+	void		*ctx;
+	dma_addr_t	mapping;
+};
+
+#define BNX2_MAX_CID		0x2000
+
+struct cnic_dma {
+	int		num_pages;
+	void		**pg_arr;
+	dma_addr_t	*pg_map_arr;
+	int		pgtbl_size;
+	u32		*pgtbl;
+	dma_addr_t	pgtbl_map;
+};
+
+struct cnic_id_tbl {
+	spinlock_t	lock;
+	u32		start;
+	u32		max;
+	u32		next;
+	unsigned long	*table;
+};
+
+#define CNIC_KWQ16_DATA_SIZE	128
+
+struct kwqe_16_data {
+	u8	data[CNIC_KWQ16_DATA_SIZE];
+};
+
+struct cnic_iscsi {
+	struct cnic_dma		task_array_info;
+	struct cnic_dma		r2tq_info;
+	struct cnic_dma		hq_info;
+};
+
+struct cnic_context {
+	u32			cid;
+	struct kwqe_16_data	*kwqe_data;
+	dma_addr_t		kwqe_data_mapping;
+	wait_queue_head_t	waitq;
+	int			wait_cond;
+	unsigned long		timestamp;
+	u32			ctx_flags;
+#define	CTX_FL_OFFLD_START	0x00000001
+	u8			ulp_proto_id;
+	union {
+		struct cnic_iscsi	*iscsi;
+	} proto;
+};
+
+struct cnic_local {
+
+	spinlock_t cnic_ulp_lock;
+	void *ulp_handle[MAX_CNIC_ULP_TYPE];
+	unsigned long ulp_flags[MAX_CNIC_ULP_TYPE];
+#define ULP_F_INIT	0
+#define ULP_F_START	1
+	struct cnic_ulp_ops *ulp_ops[MAX_CNIC_ULP_TYPE];
+
+	/* protected by ulp_lock */
+	u32 cnic_local_flags;
+#define	CNIC_LCL_FL_KWQ_INIT	0x00000001
+
+	struct cnic_dev *dev;
+
+	struct cnic_eth_dev *ethdev;
+
+	void		*l2_ring;
+	dma_addr_t	l2_ring_map;
+	int		l2_ring_size;
+	int		l2_rx_ring_size;
+
+	void		*l2_buf;
+	dma_addr_t	l2_buf_map;
+	int		l2_buf_size;
+	int		l2_single_buf_size;
+
+	u16		*rx_cons_ptr;
+	u16		*tx_cons_ptr;
+	u16		rx_cons;
+	u16		tx_cons;
+
+	u32 kwq_cid_addr;
+	u32 kcq_cid_addr;
+
+	struct cnic_dma		kwq_info;
+	struct kwqe		**kwq;
+
+	struct cnic_dma		kwq_16_data_info;
+
+	u16		max_kwq_idx;
+
+	u16		kwq_prod_idx;
+	u32		kwq_io_addr;
+
+	u16		*kwq_con_idx_ptr;
+	u16		kwq_con_idx;
+
+	struct cnic_dma	kcq_info;
+	struct kcqe	**kcq;
+
+	u16		kcq_prod_idx;
+	u32		kcq_io_addr;
+
+	void				*status_blk;
+	struct status_block_msix	*bnx2_status_blk;
+	struct host_status_block	*bnx2x_status_blk;
+
+	u32				status_blk_num;
+	u32				int_num;
+	u32				last_status_idx;
+	struct tasklet_struct		cnic_irq_task;
+
+	struct kcqe		*completed_kcq[MAX_COMPLETED_KCQE];
+
+	struct cnic_sock	*csk_tbl;
+	struct cnic_id_tbl	csk_port_tbl;
+
+	struct cnic_dma		conn_buf_info;
+	struct cnic_dma		gbl_buf_info;
+
+	struct cnic_iscsi	*iscsi_tbl;
+	struct cnic_context	*ctx_tbl;
+	struct cnic_id_tbl	cid_tbl;
+	int			max_iscsi_conn;
+	atomic_t		iscsi_conn;
+
+	/* per connection parameters */
+	int			num_iscsi_tasks;
+	int			num_ccells;
+	int			task_array_size;
+	int			r2tq_size;
+	int			hq_size;
+	int			num_cqs;
+
+	struct cnic_ctx		*ctx_arr;
+	int			ctx_blks;
+	int			ctx_blk_size;
+	int			cids_per_blk;
+
+	u32			chip_id;
+	int			func;
+	u32			shmem_base;
+
+	u32			uio_dev;
+	struct uio_info		*cnic_uinfo;
+
+	struct cnic_ops		*cnic_ops;
+	int			(*start_hw)(struct cnic_dev *);
+	void			(*stop_hw)(struct cnic_dev *);
+	void			(*setup_pgtbl)(struct cnic_dev *,
+					       struct cnic_dma *);
+	int			(*alloc_resc)(struct cnic_dev *);
+	void			(*free_resc)(struct cnic_dev *);
+	int			(*start_cm)(struct cnic_dev *);
+	void			(*stop_cm)(struct cnic_dev *);
+	void			(*enable_int)(struct cnic_dev *);
+	void			(*disable_int_sync)(struct cnic_dev *);
+	void			(*ack_int)(struct cnic_dev *);
+	void			(*close_conn)(struct cnic_sock *, u32 opcode);
+	u16			(*next_idx)(u16);
+	u16			(*hw_idx)(u16);
+};
+
+struct bnx2x_bd_chain_next {
+	u32	addr_lo;
+	u32	addr_hi;
+	u8	reserved[8];
+};
+
+#define ISCSI_RAMROD_CMD_ID_UPDATE_CONN		(ISCSI_KCQE_OPCODE_UPDATE_CONN)
+#define ISCSI_RAMROD_CMD_ID_INIT		(ISCSI_KCQE_OPCODE_INIT)
+
+#define CDU_REGION_NUMBER_XCM_AG 2
+#define CDU_REGION_NUMBER_UCM_AG 4
+
+#endif
+
diff --git a/drivers/net/cnic_defs.h b/drivers/net/cnic_defs.h
new file mode 100644
index 0000000..cee80f6
--- /dev/null
+++ b/drivers/net/cnic_defs.h
@@ -0,0 +1,580 @@
+
+/* cnic.c: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ */
+
+#ifndef CNIC_DEFS_H
+#define CNIC_DEFS_H
+
+/* KWQ (kernel work queue) request op codes */
+#define L2_KWQE_OPCODE_VALUE_FLUSH                  (4)
+
+#define L4_KWQE_OPCODE_VALUE_CONNECT1               (50)
+#define L4_KWQE_OPCODE_VALUE_CONNECT2               (51)
+#define L4_KWQE_OPCODE_VALUE_CONNECT3               (52)
+#define L4_KWQE_OPCODE_VALUE_RESET                  (53)
+#define L4_KWQE_OPCODE_VALUE_CLOSE                  (54)
+#define L4_KWQE_OPCODE_VALUE_UPDATE_SECRET          (60)
+#define L4_KWQE_OPCODE_VALUE_INIT_ULP               (61)
+
+#define L4_KWQE_OPCODE_VALUE_OFFLOAD_PG             (1)
+#define L4_KWQE_OPCODE_VALUE_UPDATE_PG              (9)
+#define L4_KWQE_OPCODE_VALUE_UPLOAD_PG              (14)
+
+#define L5CM_RAMROD_CMD_ID_BASE			(0x80)
+#define L5CM_RAMROD_CMD_ID_TCP_CONNECT		(L5CM_RAMROD_CMD_ID_BASE + 3)
+#define L5CM_RAMROD_CMD_ID_CLOSE		(L5CM_RAMROD_CMD_ID_BASE + 12)
+#define L5CM_RAMROD_CMD_ID_ABORT		(L5CM_RAMROD_CMD_ID_BASE + 13)
+#define L5CM_RAMROD_CMD_ID_SEARCHER_DELETE	(L5CM_RAMROD_CMD_ID_BASE + 14)
+#define L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD	(L5CM_RAMROD_CMD_ID_BASE + 15)
+
+/* KCQ (kernel completion queue) response op codes */
+#define L4_KCQE_OPCODE_VALUE_CLOSE_COMP             (53)
+#define L4_KCQE_OPCODE_VALUE_RESET_COMP             (54)
+#define L4_KCQE_OPCODE_VALUE_FW_TCP_UPDATE          (55)
+#define L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE       (56)
+#define L4_KCQE_OPCODE_VALUE_RESET_RECEIVED         (57)
+#define L4_KCQE_OPCODE_VALUE_CLOSE_RECEIVED         (58)
+#define L4_KCQE_OPCODE_VALUE_INIT_ULP               (61)
+
+#define L4_KCQE_OPCODE_VALUE_OFFLOAD_PG             (1)
+#define L4_KCQE_OPCODE_VALUE_UPDATE_PG              (9)
+#define L4_KCQE_OPCODE_VALUE_UPLOAD_PG              (14)
+
+/* KCQ (kernel completion queue) completion status */
+#define L4_KCQE_COMPLETION_STATUS_SUCCESS		    (0)
+#define L4_KCQE_COMPLETION_STATUS_TIMEOUT        (0x93)
+
+#define L4_LAYER_CODE (4)
+#define L2_LAYER_CODE (2)
+
+/*
+ * L4 KCQ CQE
+ */
+struct l4_kcq {
+	u32 cid;
+	u32 pg_cid;
+	u32 conn_id;
+	u32 pg_host_opaque;
+#if defined(__BIG_ENDIAN)
+	u16 status;
+	u16 reserved1;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved1;
+	u16 status;
+#endif
+	u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KCQ_RESERVED3 (0x7<<0)
+#define L4_KCQ_RESERVED3_SHIFT 0
+#define L4_KCQ_RAMROD_COMPLETION (0x1<<3) /* Everest only */
+#define L4_KCQ_RAMROD_COMPLETION_SHIFT 3
+#define L4_KCQ_LAYER_CODE (0x7<<4)
+#define L4_KCQ_LAYER_CODE_SHIFT 4
+#define L4_KCQ_RESERVED4 (0x1<<7)
+#define L4_KCQ_RESERVED4_SHIFT 7
+	u8 op_code;
+	u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+	u16 qe_self_seq;
+	u8 op_code;
+	u8 flags;
+#define L4_KCQ_RESERVED3 (0xF<<0)
+#define L4_KCQ_RESERVED3_SHIFT 0
+#define L4_KCQ_RAMROD_COMPLETION (0x1<<3) /* Everest only */
+#define L4_KCQ_RAMROD_COMPLETION_SHIFT 3
+#define L4_KCQ_LAYER_CODE (0x7<<4)
+#define L4_KCQ_LAYER_CODE_SHIFT 4
+#define L4_KCQ_RESERVED4 (0x1<<7)
+#define L4_KCQ_RESERVED4_SHIFT 7
+#endif
+};
+
+
+/*
+ * L4 KCQ CQE PG upload
+ */
+struct l4_kcq_upload_pg {
+	u32 pg_cid;
+#if defined(__BIG_ENDIAN)
+	u16 pg_status;
+	u16 pg_ipid_count;
+#elif defined(__LITTLE_ENDIAN)
+	u16 pg_ipid_count;
+	u16 pg_status;
+#endif
+	u32 reserved1[5];
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KCQ_UPLOAD_PG_RESERVED3 (0xF<<0)
+#define L4_KCQ_UPLOAD_PG_RESERVED3_SHIFT 0
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KCQ_UPLOAD_PG_RESERVED4 (0x1<<7)
+#define L4_KCQ_UPLOAD_PG_RESERVED4_SHIFT 7
+	u8 op_code;
+	u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+	u16 qe_self_seq;
+	u8 op_code;
+	u8 flags;
+#define L4_KCQ_UPLOAD_PG_RESERVED3 (0xF<<0)
+#define L4_KCQ_UPLOAD_PG_RESERVED3_SHIFT 0
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KCQ_UPLOAD_PG_RESERVED4 (0x1<<7)
+#define L4_KCQ_UPLOAD_PG_RESERVED4_SHIFT 7
+#endif
+};
+
+
+/*
+ * Gracefully close the connection request
+ */
+struct l4_kwq_close_req {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_CLOSE_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_CLOSE_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_CLOSE_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_CLOSE_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 cid;
+	u32 reserved2[6];
+};
+
+
+/*
+ * The first request to be passed in order to establish connection in option2
+ */
+struct l4_kwq_connect_req1 {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ1_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ1_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u8 reserved0;
+	u8 conn_flags;
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_IP_V6 (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_IP_V6_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_RSRV (0x1F<<3)
+#define L4_KWQ_CONNECT_REQ1_RSRV_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+	u8 conn_flags;
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_IP_V6 (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_IP_V6_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_RSRV (0x1F<<3)
+#define L4_KWQ_CONNECT_REQ1_RSRV_SHIFT 3
+	u8 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ1_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ1_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 cid;
+	u32 pg_cid;
+	u32 src_ip;
+	u32 dst_ip;
+#if defined(__BIG_ENDIAN)
+	u16 dst_port;
+	u16 src_port;
+#elif defined(__LITTLE_ENDIAN)
+	u16 src_port;
+	u16 dst_port;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 rsrv1[3];
+	u8 tcp_flags;
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP (0x1<<3)
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP_SHIFT 3
+#define L4_KWQ_CONNECT_REQ1_SACK (0x1<<4)
+#define L4_KWQ_CONNECT_REQ1_SACK_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING (0x1<<5)
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING_SHIFT 5
+#define L4_KWQ_CONNECT_REQ1_RESERVED2 (0x3<<6)
+#define L4_KWQ_CONNECT_REQ1_RESERVED2_SHIFT 6
+#elif defined(__LITTLE_ENDIAN)
+	u8 tcp_flags;
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP (0x1<<3)
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP_SHIFT 3
+#define L4_KWQ_CONNECT_REQ1_SACK (0x1<<4)
+#define L4_KWQ_CONNECT_REQ1_SACK_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING (0x1<<5)
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING_SHIFT 5
+#define L4_KWQ_CONNECT_REQ1_RESERVED2 (0x3<<6)
+#define L4_KWQ_CONNECT_REQ1_RESERVED2_SHIFT 6
+	u8 rsrv1[3];
+#endif
+	u32 rsrv2;
+};
+
+
+/*
+ * The second ( optional )request to be passed in order to establish
+ * connection in option2 - for IPv6 only
+ */
+struct l4_kwq_connect_req2 {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ2_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ2_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u8 reserved0;
+	u8 rsrv;
+#elif defined(__LITTLE_ENDIAN)
+	u8 rsrv;
+	u8 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ2_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ2_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 reserved2;
+	u32 src_ip_v6_2;
+	u32 src_ip_v6_3;
+	u32 src_ip_v6_4;
+	u32 dst_ip_v6_2;
+	u32 dst_ip_v6_3;
+	u32 dst_ip_v6_4;
+};
+
+
+/*
+ * The third ( and last )request to be passed in order to establish
+ * connection in option2
+ */
+struct l4_kwq_connect_req3 {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ3_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ3_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ3_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ3_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 ka_timeout;
+	u32 ka_interval ;
+#if defined(__BIG_ENDIAN)
+	u8 snd_seq_scale;
+	u8 ttl;
+	u8 tos;
+	u8 ka_max_probe_count;
+#elif defined(__LITTLE_ENDIAN)
+	u8 ka_max_probe_count;
+	u8 tos;
+	u8 ttl;
+	u8 snd_seq_scale;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 pmtu;
+	u16 mss;
+#elif defined(__LITTLE_ENDIAN)
+	u16 mss;
+	u16 pmtu;
+#endif
+	u32 rcv_buf;
+	u32 snd_buf;
+	u32 seed;
+};
+
+
+/*
+ * a KWQE request to offload a PG connection
+ */
+struct l4_kwq_offload_pg {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_OFFLOAD_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_OFFLOAD_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_OFFLOAD_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_OFFLOAD_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT_SHIFT 7
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 l2hdr_nbytes;
+	u8 pg_flags;
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP (0x1<<0)
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING (0x1<<1)
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING_SHIFT 1
+#define L4_KWQ_OFFLOAD_PG_RESERVED2 (0x3F<<2)
+#define L4_KWQ_OFFLOAD_PG_RESERVED2_SHIFT 2
+	u8 da0;
+	u8 da1;
+#elif defined(__LITTLE_ENDIAN)
+	u8 da1;
+	u8 da0;
+	u8 pg_flags;
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP (0x1<<0)
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING (0x1<<1)
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING_SHIFT 1
+#define L4_KWQ_OFFLOAD_PG_RESERVED2 (0x3F<<2)
+#define L4_KWQ_OFFLOAD_PG_RESERVED2_SHIFT 2
+	u8 l2hdr_nbytes;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 da2;
+	u8 da3;
+	u8 da4;
+	u8 da5;
+#elif defined(__LITTLE_ENDIAN)
+	u8 da5;
+	u8 da4;
+	u8 da3;
+	u8 da2;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 sa0;
+	u8 sa1;
+	u8 sa2;
+	u8 sa3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 sa3;
+	u8 sa2;
+	u8 sa1;
+	u8 sa0;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 sa4;
+	u8 sa5;
+	u16 etype;
+#elif defined(__LITTLE_ENDIAN)
+	u16 etype;
+	u8 sa5;
+	u8 sa4;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 vlan_tag;
+	u16 ipid_start;
+#elif defined(__LITTLE_ENDIAN)
+	u16 ipid_start;
+	u16 vlan_tag;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 ipid_count;
+	u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved3;
+	u16 ipid_count;
+#endif
+	u32 host_opaque;
+};
+
+
+/*
+ * Abortively close the connection request
+ */
+struct l4_kwq_reset_req {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_RESET_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_RESET_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_RESET_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_RESET_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_RESET_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_RESET_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_RESET_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_RESET_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 cid;
+	u32 reserved2[6];
+};
+
+
+/*
+ * a KWQE request to update a PG connection
+ */
+struct l4_kwq_update_pg {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_UPDATE_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPDATE_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_UPDATE_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPDATE_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT_SHIFT 7
+	u8 opcode;
+	u16 oper16;
+#elif defined(__LITTLE_ENDIAN)
+	u16 oper16;
+	u8 opcode;
+	u8 flags;
+#define L4_KWQ_UPDATE_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPDATE_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_UPDATE_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPDATE_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 pg_cid;
+	u32 pg_host_opaque;
+#if defined(__BIG_ENDIAN)
+	u8 pg_valids;
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT (0x1<<0)
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT_SHIFT 0
+#define L4_KWQ_UPDATE_PG_VALIDS_DA (0x1<<1)
+#define L4_KWQ_UPDATE_PG_VALIDS_DA_SHIFT 1
+#define L4_KWQ_UPDATE_PG_RESERVERD2 (0x3F<<2)
+#define L4_KWQ_UPDATE_PG_RESERVERD2_SHIFT 2
+	u8 pg_unused_a;
+	u16 pg_ipid_count;
+#elif defined(__LITTLE_ENDIAN)
+	u16 pg_ipid_count;
+	u8 pg_unused_a;
+	u8 pg_valids;
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT (0x1<<0)
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT_SHIFT 0
+#define L4_KWQ_UPDATE_PG_VALIDS_DA (0x1<<1)
+#define L4_KWQ_UPDATE_PG_VALIDS_DA_SHIFT 1
+#define L4_KWQ_UPDATE_PG_RESERVERD2 (0x3F<<2)
+#define L4_KWQ_UPDATE_PG_RESERVERD2_SHIFT 2
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserverd3;
+	u8 da0;
+	u8 da1;
+#elif defined(__LITTLE_ENDIAN)
+	u8 da1;
+	u8 da0;
+	u16 reserverd3;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 da2;
+	u8 da3;
+	u8 da4;
+	u8 da5;
+#elif defined(__LITTLE_ENDIAN)
+	u8 da5;
+	u8 da4;
+	u8 da3;
+	u8 da2;
+#endif
+	u32 reserved4;
+	u32 reserved5;
+};
+
+
+/*
+ * a KWQE request to upload a PG or L4 context
+ */
+struct l4_kwq_upload {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_UPLOAD_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPLOAD_RESERVED1_SHIFT 0
+#define L4_KWQ_UPLOAD_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPLOAD_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT_SHIFT 7
+	u8 opcode;
+	u16 oper16;
+#elif defined(__LITTLE_ENDIAN)
+	u16 oper16;
+	u8 opcode;
+	u8 flags;
+#define L4_KWQ_UPLOAD_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPLOAD_RESERVED1_SHIFT 0
+#define L4_KWQ_UPLOAD_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPLOAD_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 cid;
+	u32 reserved2[6];
+};
+
+#endif /* CNIC_DEFS_H */
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
new file mode 100644
index 0000000..0638096
--- /dev/null
+++ b/drivers/net/cnic_if.h
@@ -0,0 +1,299 @@
+/* cnic_if.h: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ */
+
+
+#ifndef CNIC_IF_H
+#define CNIC_IF_H
+
+#define CNIC_MODULE_VERSION	"2.0.0"
+#define CNIC_MODULE_RELDATE	"May 21, 2009"
+
+#define CNIC_ULP_RDMA		0
+#define CNIC_ULP_ISCSI		1
+#define CNIC_ULP_L4		2
+#define MAX_CNIC_ULP_TYPE_EXT	2
+#define MAX_CNIC_ULP_TYPE	3
+
+struct kwqe {
+	u32 kwqe_op_flag;
+
+#define KWQE_OPCODE_MASK	0x00ff0000
+#define KWQE_OPCODE_SHIFT	16
+#define KWQE_FLAGS_LAYER_SHIFT	28
+#define KWQE_OPCODE(x)		((x & KWQE_OPCODE_MASK) >> KWQE_OPCODE_SHIFT)
+
+	u32 kwqe_info0;
+	u32 kwqe_info1;
+	u32 kwqe_info2;
+	u32 kwqe_info3;
+	u32 kwqe_info4;
+	u32 kwqe_info5;
+	u32 kwqe_info6;
+};
+
+struct kwqe_16 {
+	u32 kwqe_info0;
+	u32 kwqe_info1;
+	u32 kwqe_info2;
+	u32 kwqe_info3;
+};
+
+struct kcqe {
+	u32 kcqe_info0;
+	u32 kcqe_info1;
+	u32 kcqe_info2;
+	u32 kcqe_info3;
+	u32 kcqe_info4;
+	u32 kcqe_info5;
+	u32 kcqe_info6;
+	u32 kcqe_op_flag;
+		#define KCQE_RAMROD_COMPLETION		(0x1<<27) /* Everest */
+		#define KCQE_FLAGS_LAYER_MASK		(0x7<<28)
+		#define KCQE_FLAGS_LAYER_MASK_MISC	(0<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L2	(2<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L3	(3<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L4	(4<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L5_RDMA	(5<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L5_ISCSI	(6<<28)
+		#define KCQE_FLAGS_NEXT 		(1<<31)
+		#define KCQE_FLAGS_OPCODE_MASK		(0xff<<16)
+		#define KCQE_FLAGS_OPCODE_SHIFT		(16)
+		#define KCQE_OPCODE(op)			\
+		(((op) & KCQE_FLAGS_OPCODE_MASK) >> KCQE_FLAGS_OPCODE_SHIFT)
+};
+
+#define MAX_CNIC_CTL_DATA	64
+#define MAX_DRV_CTL_DATA	64
+
+#define CNIC_CTL_STOP_CMD		1
+#define CNIC_CTL_START_CMD		2
+#define CNIC_CTL_COMPLETION_CMD		3
+
+#define DRV_CTL_IO_WR_CMD		0x101
+#define DRV_CTL_IO_RD_CMD		0x102
+#define DRV_CTL_CTX_WR_CMD		0x103
+#define DRV_CTL_CTXTBL_WR_CMD		0x104
+#define DRV_CTL_COMPLETION_CMD		0x105
+
+struct cnic_ctl_completion {
+	u32	cid;
+};
+
+struct drv_ctl_completion {
+	u32	comp_count;
+};
+
+struct cnic_ctl_info {
+	int	cmd;
+	union {
+		struct cnic_ctl_completion comp;
+		char bytes[MAX_CNIC_CTL_DATA];
+	} data;
+};
+
+struct drv_ctl_io {
+	u32		cid_addr;
+	u32		offset;
+	u32		data;
+	dma_addr_t	dma_addr;
+};
+
+struct drv_ctl_info {
+	int	cmd;
+	union {
+		struct drv_ctl_completion comp;
+		struct drv_ctl_io io;
+		char bytes[MAX_DRV_CTL_DATA];
+	} data;
+};
+
+struct cnic_ops {
+	struct module	*cnic_owner;
+	/* Calls to these functions are protected by RCU.  When
+	 * unregistering, we wait for any calls to complete before
+	 * continuing.
+	 */
+	int		(*cnic_handler)(void *, void *);
+	int		(*cnic_ctl)(void *, struct cnic_ctl_info *);
+};
+
+#define MAX_CNIC_VEC	8
+
+struct cnic_irq {
+	unsigned int	vector;
+	void		*status_blk;
+	u32		status_blk_num;
+	u32		irq_flags;
+#define CNIC_IRQ_FL_MSIX		0x00000001
+};
+
+struct cnic_eth_dev {
+	struct module	*drv_owner;
+	u32		drv_state;
+#define CNIC_DRV_STATE_REGD		0x00000001
+#define CNIC_DRV_STATE_USING_MSIX	0x00000002
+	u32		chip_id;
+	u32		max_kwqe_pending;
+	struct pci_dev	*pdev;
+	void __iomem	*io_base;
+
+	u32		ctx_tbl_offset;
+	u32		ctx_tbl_len;
+	int		ctx_blk_size;
+	u32		starting_cid;
+	u32		max_iscsi_conn;
+	u32		max_fcoe_conn;
+	u32		max_rdma_conn;
+	u32		reserved0[2];
+
+	int		num_irq;
+	struct cnic_irq	irq_arr[MAX_CNIC_VEC];
+	int		(*drv_register_cnic)(struct net_device *,
+					     struct cnic_ops *, void *);
+	int		(*drv_unregister_cnic)(struct net_device *);
+	int		(*drv_submit_kwqes_32)(struct net_device *,
+					       struct kwqe *[], u32);
+	int		(*drv_submit_kwqes_16)(struct net_device *,
+					       struct kwqe_16 *[], u32);
+	int		(*drv_ctl)(struct net_device *, struct drv_ctl_info *);
+	unsigned long	reserved1[2];
+};
+
+struct cnic_sockaddr {
+	union {
+		struct sockaddr_in	v4;
+		struct sockaddr_in6	v6;
+	} local;
+	union {
+		struct sockaddr_in	v4;
+		struct sockaddr_in6	v6;
+	} remote;
+};
+
+struct cnic_sock {
+	struct cnic_dev *dev;
+	void	*context;
+	u32	src_ip[4];
+	u32	dst_ip[4];
+	u16	src_port;
+	u16	dst_port;
+	u16	vlan_id;
+	unsigned char old_ha[6];
+	unsigned char ha[6];
+	u32	mtu;
+	u32	cid;
+	u32	l5_cid;
+	u32	pg_cid;
+	int	ulp_type;
+
+	u32	ka_timeout;
+	u32	ka_interval;
+	u8	ka_max_probe_count;
+	u8	tos;
+	u8	ttl;
+	u8	snd_seq_scale;
+	u32	rcv_buf;
+	u32	snd_buf;
+	u32	seed;
+
+	unsigned long	tcp_flags;
+#define SK_TCP_NO_DELAY_ACK	0x1
+#define SK_TCP_KEEP_ALIVE	0x2
+#define SK_TCP_NAGLE		0x4
+#define SK_TCP_TIMESTAMP	0x8
+#define SK_TCP_SACK		0x10
+#define SK_TCP_SEG_SCALING	0x20
+	unsigned long	flags;
+#define SK_F_INUSE		0
+#define SK_F_OFFLD_COMPLETE	1
+#define SK_F_OFFLD_SCHED	2
+#define SK_F_PG_OFFLD_COMPLETE	3
+#define SK_F_CONNECT_START	4
+#define SK_F_IPV6		5
+#define SK_F_CLOSING		7
+
+	atomic_t ref_count;
+	u32 state;
+	struct kwqe kwqe1;
+	struct kwqe kwqe2;
+	struct kwqe kwqe3;
+};
+
+struct cnic_dev {
+	struct net_device	*netdev;
+	struct pci_dev		*pcidev;
+	void __iomem		*regview;
+	struct list_head	list;
+
+	int (*register_device)(struct cnic_dev *dev, int ulp_type,
+			       void *ulp_ctx);
+	int (*unregister_device)(struct cnic_dev *dev, int ulp_type);
+	int (*submit_kwqes)(struct cnic_dev *dev, struct kwqe *wqes[],
+				u32 num_wqes);
+	int (*submit_kwqes_16)(struct cnic_dev *dev, struct kwqe_16 *wqes[],
+				u32 num_wqes);
+
+	int (*cm_create)(struct cnic_dev *, int, u32, u32, struct cnic_sock **,
+			 void *);
+	int (*cm_destroy)(struct cnic_sock *);
+	int (*cm_connect)(struct cnic_sock *, struct cnic_sockaddr *);
+	int (*cm_abort)(struct cnic_sock *);
+	int (*cm_close)(struct cnic_sock *);
+	struct cnic_dev *(*cm_select_dev)(struct sockaddr_in *, int ulp_type);
+	int (*iscsi_nl_msg_recv)(struct cnic_dev *dev, u32 msg_type,
+				 char *data, u16 data_size);
+	unsigned long	flags;
+#define CNIC_F_CNIC_UP		1
+#define CNIC_F_BNX2_CLASS	3
+#define CNIC_F_BNX2X_CLASS	4
+	atomic_t	ref_count;
+	u8		mac_addr[6];
+
+	int		max_iscsi_conn;
+	int		max_fcoe_conn;
+	int		max_rdma_conn;
+
+	void		*cnic_priv;
+};
+
+#define CNIC_WR(dev, off, val)		writel(val, dev->regview + off)
+#define CNIC_WR16(dev, off, val)	writew(val, dev->regview + off)
+#define CNIC_WR8(dev, off, val)		writeb(val, dev->regview + off)
+#define CNIC_RD(dev, off)		readl(dev->regview + off)
+#define CNIC_RD16(dev, off)		readw(dev->regview + off)
+
+struct cnic_ulp_ops {
+	/* Calls to these functions are protected by RCU.  When
+	 * unregistering, we wait for any calls to complete before
+	 * continuing.
+	 */
+
+	void (*cnic_init)(struct cnic_dev *dev);
+	void (*cnic_exit)(struct cnic_dev *dev);
+	void (*cnic_start)(void *ulp_ctx);
+	void (*cnic_stop)(void *ulp_ctx);
+	void (*indicate_kcqes)(void *ulp_ctx, struct kcqe *cqes[],
+				u32 num_cqes);
+	void (*indicate_netevent)(void *ulp_ctx, unsigned long event);
+	void (*cm_connect_complete)(struct cnic_sock *);
+	void (*cm_close_complete)(struct cnic_sock *);
+	void (*cm_abort_complete)(struct cnic_sock *);
+	void (*cm_remote_close)(struct cnic_sock *);
+	void (*cm_remote_abort)(struct cnic_sock *);
+	void (*iscsi_nl_send_msg)(struct cnic_dev *dev, u32 msg_type,
+				  char *data, u16 data_size);
+	struct module *owner;
+};
+
+extern int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops);
+
+extern int cnic_unregister_driver(int ulp_type);
+
+#endif
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 4d1d479..7fa620dd 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -845,6 +845,10 @@
 	int err;
 	struct net_device *dev;
 	struct virtnet_info *vi;
+	struct virtqueue *vqs[3];
+	vq_callback_t *callbacks[] = { skb_recv_done, skb_xmit_done, NULL};
+	const char *names[] = { "input", "output", "control" };
+	int nvqs;
 
 	/* Allocate ourselves a network device with room for our info */
 	dev = alloc_etherdev(sizeof(struct virtnet_info));
@@ -905,25 +909,19 @@
 	if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
 		vi->mergeable_rx_bufs = true;
 
-	/* We expect two virtqueues, receive then send. */
-	vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
-	if (IS_ERR(vi->rvq)) {
-		err = PTR_ERR(vi->rvq);
-		goto free;
-	}
+	/* We expect two virtqueues, receive then send,
+	 * and optionally control. */
+	nvqs = virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) ? 3 : 2;
 
-	vi->svq = vdev->config->find_vq(vdev, 1, skb_xmit_done);
-	if (IS_ERR(vi->svq)) {
-		err = PTR_ERR(vi->svq);
-		goto free_recv;
-	}
+	err = vdev->config->find_vqs(vdev, nvqs, vqs, callbacks, names);
+	if (err)
+		goto free;
+
+	vi->rvq = vqs[0];
+	vi->svq = vqs[1];
 
 	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
-		vi->cvq = vdev->config->find_vq(vdev, 2, NULL);
-		if (IS_ERR(vi->cvq)) {
-			err = PTR_ERR(vi->svq);
-			goto free_send;
-		}
+		vi->cvq = vqs[2];
 
 		if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VLAN))
 			dev->features |= NETIF_F_HW_VLAN_FILTER;
@@ -941,7 +939,7 @@
 	err = register_netdev(dev);
 	if (err) {
 		pr_debug("virtio_net: registering device failed\n");
-		goto free_ctrl;
+		goto free_vqs;
 	}
 
 	/* Last of all, set up some receive buffers. */
@@ -962,13 +960,8 @@
 
 unregister:
 	unregister_netdev(dev);
-free_ctrl:
-	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ))
-		vdev->config->del_vq(vi->cvq);
-free_send:
-	vdev->config->del_vq(vi->svq);
-free_recv:
-	vdev->config->del_vq(vi->rvq);
+free_vqs:
+	vdev->config->del_vqs(vdev);
 free:
 	free_netdev(dev);
 	return err;
@@ -994,12 +987,10 @@
 
 	BUG_ON(vi->num != 0);
 
-	vdev->config->del_vq(vi->svq);
-	vdev->config->del_vq(vi->rvq);
-	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ))
-		vdev->config->del_vq(vi->cvq);
 	unregister_netdev(vi->dev);
 
+	vdev->config->del_vqs(vi->vdev);
+
 	while (vi->pages)
 		__free_pages(get_a_page(vi, GFP_KERNEL), 0);
 
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index cbc8566..e38e5d3 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -173,8 +173,9 @@
  * this device and sets it up.
  */
 static struct virtqueue *kvm_find_vq(struct virtio_device *vdev,
-				    unsigned index,
-				    void (*callback)(struct virtqueue *vq))
+				     unsigned index,
+				     void (*callback)(struct virtqueue *vq),
+				     const char *name)
 {
 	struct kvm_device *kdev = to_kvmdev(vdev);
 	struct kvm_vqconfig *config;
@@ -194,7 +195,7 @@
 
 	vq = vring_new_virtqueue(config->num, KVM_S390_VIRTIO_RING_ALIGN,
 				 vdev, (void *) config->address,
-				 kvm_notify, callback);
+				 kvm_notify, callback, name);
 	if (!vq) {
 		err = -ENOMEM;
 		goto unmap;
@@ -226,6 +227,38 @@
 				       KVM_S390_VIRTIO_RING_ALIGN));
 }
 
+static void kvm_del_vqs(struct virtio_device *vdev)
+{
+	struct virtqueue *vq, *n;
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		kvm_del_vq(vq);
+}
+
+static int kvm_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+			struct virtqueue *vqs[],
+			vq_callback_t *callbacks[],
+			const char *names[])
+{
+	struct kvm_device *kdev = to_kvmdev(vdev);
+	int i;
+
+	/* We must have this many virtqueues. */
+	if (nvqs > kdev->desc->num_vq)
+		return -ENOENT;
+
+	for (i = 0; i < nvqs; ++i) {
+		vqs[i] = kvm_find_vq(vdev, i, callbacks[i], names[i]);
+		if (IS_ERR(vqs[i]))
+			goto error;
+	}
+	return 0;
+
+error:
+	kvm_del_vqs(vdev);
+	return PTR_ERR(vqs[i]);
+}
+
 /*
  * The config ops structure as defined by virtio config
  */
@@ -237,8 +270,8 @@
 	.get_status = kvm_get_status,
 	.set_status = kvm_set_status,
 	.reset = kvm_reset,
-	.find_vq = kvm_find_vq,
-	.del_vq = kvm_del_vq,
+	.find_vqs = kvm_find_vqs,
+	.del_vqs = kvm_del_vqs,
 };
 
 /*
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index 733fe3b..b2fe5cd 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -11,6 +11,24 @@
 
 #include "zfcp_ext.h"
 
+#define ZFCP_MODEL_PRIV 0x4
+
+static struct ccw_device_id zfcp_ccw_device_id[] = {
+	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x3) },
+	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, ZFCP_MODEL_PRIV) },
+	{},
+};
+MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id);
+
+/**
+ * zfcp_ccw_priv_sch - check if subchannel is privileged
+ * @adapter: Adapter/Subchannel to check
+ */
+int zfcp_ccw_priv_sch(struct zfcp_adapter *adapter)
+{
+	return adapter->ccw_device->id.dev_model == ZFCP_MODEL_PRIV;
+}
+
 /**
  * zfcp_ccw_probe - probe function of zfcp driver
  * @ccw_device: pointer to belonging ccw device
@@ -176,8 +194,8 @@
 					"ccnoti4", NULL);
 		break;
 	case CIO_BOXED:
-		dev_warn(&adapter->ccw_device->dev,
-			 "The ccw device did not respond in time.\n");
+		dev_warn(&adapter->ccw_device->dev, "The FCP device "
+			 "did not respond within the specified time\n");
 		zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti5", NULL);
 		break;
 	}
@@ -199,14 +217,6 @@
 	up(&zfcp_data.config_sema);
 }
 
-static struct ccw_device_id zfcp_ccw_device_id[] = {
-	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x3) },
-	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x4) }, /* priv. */
-	{},
-};
-
-MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id);
-
 static struct ccw_driver zfcp_ccw_driver = {
 	.owner       = THIS_MODULE,
 	.name        = "zfcp",
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 0a1a5dd..b99b87c 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -163,7 +163,7 @@
 	}
 
 	response->fsf_command = fsf_req->fsf_command;
-	response->fsf_reqid = (unsigned long)fsf_req;
+	response->fsf_reqid = fsf_req->req_id;
 	response->fsf_seqno = fsf_req->seq_no;
 	response->fsf_issued = fsf_req->issued;
 	response->fsf_prot_status = qtcb->prefix.prot_status;
@@ -737,7 +737,7 @@
 	spin_lock_irqsave(&adapter->san_dbf_lock, flags);
 	memset(r, 0, sizeof(*r));
 	strncpy(r->tag, "octc", ZFCP_DBF_TAG_SIZE);
-	r->fsf_reqid = (unsigned long)fsf_req;
+	r->fsf_reqid = fsf_req->req_id;
 	r->fsf_seqno = fsf_req->seq_no;
 	r->s_id = fc_host_port_id(adapter->scsi_host);
 	r->d_id = wka_port->d_id;
@@ -773,7 +773,7 @@
 	spin_lock_irqsave(&adapter->san_dbf_lock, flags);
 	memset(r, 0, sizeof(*r));
 	strncpy(r->tag, "rctc", ZFCP_DBF_TAG_SIZE);
-	r->fsf_reqid = (unsigned long)fsf_req;
+	r->fsf_reqid = fsf_req->req_id;
 	r->fsf_seqno = fsf_req->seq_no;
 	r->s_id = wka_port->d_id;
 	r->d_id = fc_host_port_id(adapter->scsi_host);
@@ -803,7 +803,7 @@
 	spin_lock_irqsave(&adapter->san_dbf_lock, flags);
 	memset(rec, 0, sizeof(*rec));
 	strncpy(rec->tag, tag, ZFCP_DBF_TAG_SIZE);
-	rec->fsf_reqid = (unsigned long)fsf_req;
+	rec->fsf_reqid = fsf_req->req_id;
 	rec->fsf_seqno = fsf_req->seq_no;
 	rec->s_id = s_id;
 	rec->d_id = d_id;
@@ -965,7 +965,7 @@
 						      ZFCP_DBF_SCSI_FCP_SNS_INFO);
 				}
 
-				rec->fsf_reqid = (unsigned long)fsf_req;
+				rec->fsf_reqid = fsf_req->req_id;
 				rec->fsf_seqno = fsf_req->seq_no;
 				rec->fsf_issued = fsf_req->issued;
 			}
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 4c362a9..2074d45 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -47,13 +47,6 @@
 
 /********************* CIO/QDIO SPECIFIC DEFINES *****************************/
 
-/* Adapter Identification Parameters */
-#define ZFCP_CONTROL_UNIT_TYPE  0x1731
-#define ZFCP_CONTROL_UNIT_MODEL 0x03
-#define ZFCP_DEVICE_TYPE        0x1732
-#define ZFCP_DEVICE_MODEL       0x03
-#define ZFCP_DEVICE_MODEL_PRIV	0x04
-
 /* DMQ bug workaround: don't use last SBALE */
 #define ZFCP_MAX_SBALES_PER_SBAL	(QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
 
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index fdc9b43..e50ea46 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -880,6 +880,7 @@
 				zfcp_port_put(port);
 			return ZFCP_ERP_CONTINUES;
 		}
+		/* fall through */
 	case ZFCP_ERP_STEP_NAMESERVER_LOOKUP:
 		if (!port->d_id)
 			return ZFCP_ERP_FAILED;
@@ -894,8 +895,13 @@
 				act->step = ZFCP_ERP_STEP_PORT_CLOSING;
 				return ZFCP_ERP_CONTINUES;
 			}
-		/* fall through otherwise */
 		}
+		if (port->d_id && !(p_status & ZFCP_STATUS_COMMON_NOESC)) {
+			port->d_id = 0;
+			_zfcp_erp_port_reopen(port, 0, "erpsoc1", NULL);
+			return ZFCP_ERP_EXIT;
+		}
+		/* fall through otherwise */
 	}
 	return ZFCP_ERP_FAILED;
 }
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 2e31b53..120a9a1 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -27,6 +27,7 @@
 
 /* zfcp_ccw.c */
 extern int zfcp_ccw_register(void);
+extern int zfcp_ccw_priv_sch(struct zfcp_adapter *);
 extern struct zfcp_adapter *zfcp_get_adapter_by_busid(char *);
 
 /* zfcp_cfdc.c */
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 19ae084..bb2752b 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -150,9 +150,14 @@
 	struct zfcp_port *port;
 
 	read_lock_irqsave(&zfcp_data.config_lock, flags);
-	list_for_each_entry(port, &fsf_req->adapter->port_list_head, list)
+	list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) {
 		if ((port->d_id & range) == (elem->nport_did & range))
 			zfcp_test_link(port);
+		if (!port->d_id)
+			zfcp_erp_port_reopen(port,
+					     ZFCP_STATUS_COMMON_ERP_FAILED,
+					     "fcrscn1", NULL);
+	}
 
 	read_unlock_irqrestore(&zfcp_data.config_lock, flags);
 }
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 74dee32..e6dae37 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -526,6 +526,7 @@
 		break;
 	case FSF_TOPO_AL:
 		fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
+		/* fall through */
 	default:
 		dev_err(&adapter->ccw_device->dev,
 			"Unknown or unsupported arbitrated loop "
@@ -897,6 +898,7 @@
 		switch (fsq->word[0]) {
 		case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
 			zfcp_test_link(unit->port);
+			/* fall through */
 		case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
 			req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 			break;
@@ -993,6 +995,7 @@
 		break;
 	case FSF_PORT_HANDLE_NOT_VALID:
 		zfcp_erp_adapter_reopen(adapter, 0, "fsscth1", req);
+		/* fall through */
 	case FSF_GENERIC_COMMAND_REJECTED:
 	case FSF_PAYLOAD_SIZE_MISMATCH:
 	case FSF_REQUEST_SIZE_TOO_LARGE:
@@ -1399,7 +1402,7 @@
 	struct fsf_plogi *plogi;
 
 	if (req->status & ZFCP_STATUS_FSFREQ_ERROR)
-		return;
+		goto out;
 
 	switch (header->fsf_status) {
 	case FSF_PORT_ALREADY_OPEN:
@@ -1461,6 +1464,9 @@
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	}
+
+out:
+	zfcp_port_put(port);
 }
 
 /**
@@ -1473,6 +1479,7 @@
 	struct qdio_buffer_element *sbale;
 	struct zfcp_adapter *adapter = erp_action->adapter;
 	struct zfcp_fsf_req *req;
+	struct zfcp_port *port = erp_action->port;
 	int retval = -EIO;
 
 	spin_lock_bh(&adapter->req_q_lock);
@@ -1493,16 +1500,18 @@
         sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
 
 	req->handler = zfcp_fsf_open_port_handler;
-	req->qtcb->bottom.support.d_id = erp_action->port->d_id;
-	req->data = erp_action->port;
+	req->qtcb->bottom.support.d_id = port->d_id;
+	req->data = port;
 	req->erp_action = erp_action;
 	erp_action->fsf_req = req;
+	zfcp_port_get(port);
 
 	zfcp_fsf_start_erp_timer(req);
 	retval = zfcp_fsf_req_send(req);
 	if (retval) {
 		zfcp_fsf_req_free(req);
 		erp_action->fsf_req = NULL;
+		zfcp_port_put(port);
 	}
 out:
 	spin_unlock_bh(&adapter->req_q_lock);
@@ -1590,8 +1599,10 @@
 	case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED:
 		dev_warn(&req->adapter->ccw_device->dev,
 			 "Opening WKA port 0x%x failed\n", wka_port->d_id);
+		/* fall through */
 	case FSF_ADAPTER_STATUS_AVAILABLE:
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
+		/* fall through */
 	case FSF_ACCESS_DENIED:
 		wka_port->status = ZFCP_WKA_PORT_OFFLINE;
 		break;
@@ -1876,7 +1887,7 @@
 
 		if (!(adapter->connection_features & FSF_FEATURE_NPIV_MODE) &&
 		    (adapter->adapter_features & FSF_FEATURE_LUN_SHARING) &&
-		    (adapter->ccw_device->id.dev_model != ZFCP_DEVICE_MODEL_PRIV)) {
+		    !zfcp_ccw_priv_sch(adapter)) {
 			exclusive = (bottom->lun_access_info &
 					FSF_UNIT_ACCESS_EXCLUSIVE);
 			readwrite = (bottom->lun_access_info &
@@ -2314,7 +2325,7 @@
 {
 	struct zfcp_fsf_req *req;
 	struct fcp_cmnd_iu *fcp_cmnd_iu;
-	unsigned int sbtype;
+	unsigned int sbtype = SBAL_FLAGS0_TYPE_READ;
 	int real_bytes, retval = -EIO;
 	struct zfcp_adapter *adapter = unit->port->adapter;
 
@@ -2356,11 +2367,9 @@
 	switch (scsi_cmnd->sc_data_direction) {
 	case DMA_NONE:
 		req->qtcb->bottom.io.data_direction = FSF_DATADIR_CMND;
-		sbtype = SBAL_FLAGS0_TYPE_READ;
 		break;
 	case DMA_FROM_DEVICE:
 		req->qtcb->bottom.io.data_direction = FSF_DATADIR_READ;
-		sbtype = SBAL_FLAGS0_TYPE_READ;
 		fcp_cmnd_iu->rddata = 1;
 		break;
 	case DMA_TO_DEVICE:
@@ -2369,8 +2378,6 @@
 		fcp_cmnd_iu->wddata = 1;
 		break;
 	case DMA_BIDIRECTIONAL:
-	default:
-		retval = -EIO;
 		goto failed_scsi_cmnd;
 	}
 
@@ -2394,9 +2401,7 @@
 					     scsi_sglist(scsi_cmnd),
 					     FSF_MAX_SBALS_PER_REQ);
 	if (unlikely(real_bytes < 0)) {
-		if (req->sbal_number < FSF_MAX_SBALS_PER_REQ)
-			retval = -EIO;
-		else {
+		if (req->sbal_number >= FSF_MAX_SBALS_PER_REQ) {
 			dev_err(&adapter->ccw_device->dev,
 				"Oversize data package, unit 0x%016Lx "
 				"on port 0x%016Lx closed\n",
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index e8fbeae..7d0da23 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -12,6 +12,10 @@
 #include "zfcp_ext.h"
 #include <asm/atomic.h>
 
+static unsigned int default_depth = 32;
+module_param_named(queue_depth, default_depth, uint, 0600);
+MODULE_PARM_DESC(queue_depth, "Default queue depth for new SCSI devices");
+
 /* Find start of Sense Information in FCP response unit*/
 char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu)
 {
@@ -24,6 +28,12 @@
 	return fcp_sns_info_ptr;
 }
 
+static int zfcp_scsi_change_queue_depth(struct scsi_device *sdev, int depth)
+{
+	scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+	return sdev->queue_depth;
+}
+
 static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt)
 {
 	struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata;
@@ -34,7 +44,7 @@
 static int zfcp_scsi_slave_configure(struct scsi_device *sdp)
 {
 	if (sdp->tagged_supported)
-		scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, 32);
+		scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, default_depth);
 	else
 		scsi_adjust_queue_depth(sdp, 0, 1);
 	return 0;
@@ -647,6 +657,7 @@
 		.name			 = "zfcp",
 		.module			 = THIS_MODULE,
 		.proc_name		 = "zfcp",
+		.change_queue_depth	 = zfcp_scsi_change_queue_depth,
 		.slave_alloc		 = zfcp_scsi_slave_alloc,
 		.slave_configure	 = zfcp_scsi_slave_configure,
 		.slave_destroy		 = zfcp_scsi_slave_destroy,
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index fb27407..6a19ed9 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -191,20 +191,19 @@
 	  it has an enclosure device.  Selecting this option will just allow
 	  certain enclosure conditions to be reported and is not required.
 
-comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
-	depends on SCSI
-
 config SCSI_MULTI_LUN
 	bool "Probe all LUNs on each SCSI device"
 	depends on SCSI
 	help
-	  If you have a SCSI device that supports more than one LUN (Logical
-	  Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
-	  can say Y here to force the SCSI driver to probe for multiple LUNs.
-	  A SCSI device with multiple LUNs acts logically like multiple SCSI
-	  devices. The vast majority of SCSI devices have only one LUN, and
-	  so most people can say N here. The max_luns boot/module parameter 
-	  allows to override this setting.
+	  Some devices support more than one LUN (Logical Unit Number) in order
+	  to allow access to several media, e.g. CD jukebox, USB card reader,
+	  mobile phone in mass storage mode. This option forces the kernel to
+	  probe for all LUNs by default. This setting can be overriden by
+	  max_luns boot/module parameter. Note that this option does not affect
+	  devices conforming to SCSI-3 or higher as they can explicitely report
+	  their number of LUNs. It is safe to say Y here unless you have one of
+	  those rare devices which reacts in an unexpected way when probed for
+	  multiple LUNs.
 
 config SCSI_CONSTANTS
 	bool "Verbose SCSI error reporting (kernel size +=12K)"
@@ -355,6 +354,7 @@
 	 http://open-iscsi.org
 
 source "drivers/scsi/cxgb3i/Kconfig"
+source "drivers/scsi/bnx2i/Kconfig"
 
 config SGIWD93_SCSI
 	tristate "SGI WD93C93 SCSI Driver"
@@ -508,6 +508,7 @@
 
 source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
 source "drivers/scsi/aic94xx/Kconfig"
+source "drivers/scsi/mvsas/Kconfig"
 
 config SCSI_DPT_I2O
 	tristate "Adaptec I2O RAID support "
@@ -1050,16 +1051,6 @@
 
 	  Generally, saying N is fine.
 
-config SCSI_MVSAS
-	tristate "Marvell 88SE6440 SAS/SATA support"
-	depends on PCI && SCSI
-	select SCSI_SAS_LIBSAS
-	help
-	  This driver supports Marvell SAS/SATA PCI devices.
-
-	  To compiler this driver as a module, choose M here: the module
-	  will be called mvsas.
-
 config SCSI_NCR53C406A
 	tristate "NCR53c406a SCSI support"
 	depends on ISA && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index a5049cf..25429ea 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -126,9 +126,10 @@
 obj-$(CONFIG_SCSI_IBMVFC)	+= ibmvscsi/
 obj-$(CONFIG_SCSI_HPTIOP)	+= hptiop.o
 obj-$(CONFIG_SCSI_STEX)		+= stex.o
-obj-$(CONFIG_SCSI_MVSAS)	+= mvsas.o
+obj-$(CONFIG_SCSI_MVSAS)	+= mvsas/
 obj-$(CONFIG_PS3_ROM)		+= ps3rom.o
 obj-$(CONFIG_SCSI_CXGB3_ISCSI)	+= libiscsi.o libiscsi_tcp.o cxgb3i/
+obj-$(CONFIG_SCSI_BNX2_ISCSI)	+= libiscsi.o bnx2i/
 
 obj-$(CONFIG_ARM)		+= arm/
 
diff --git a/drivers/scsi/NCR_D700.c b/drivers/scsi/NCR_D700.c
index c889d84..1cdf09a 100644
--- a/drivers/scsi/NCR_D700.c
+++ b/drivers/scsi/NCR_D700.c
@@ -224,7 +224,7 @@
 	return ret;
 }
 
-static int
+static irqreturn_t
 NCR_D700_intr(int irq, void *data)
 {
 	struct NCR_D700_private *p = (struct NCR_D700_private *)data;
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_constants.h b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
new file mode 100644
index 0000000..2fceb19
--- /dev/null
+++ b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
@@ -0,0 +1,155 @@
+/* 57xx_iscsi_constants.h: Broadcom NetXtreme II iSCSI HSI
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+#ifndef __57XX_ISCSI_CONSTANTS_H_
+#define __57XX_ISCSI_CONSTANTS_H_
+
+/**
+* This file defines HSI constants for the iSCSI flows
+*/
+
+/* iSCSI request op codes */
+#define ISCSI_OPCODE_CLEANUP_REQUEST    (7)
+
+/* iSCSI response/messages op codes */
+#define ISCSI_OPCODE_CLEANUP_RESPONSE 		(0x27)
+#define ISCSI_OPCODE_NOPOUT_LOCAL_COMPLETION    (0)
+
+/* iSCSI task types */
+#define ISCSI_TASK_TYPE_READ    (0)
+#define ISCSI_TASK_TYPE_WRITE   (1)
+#define ISCSI_TASK_TYPE_MPATH   (2)
+
+/* initial CQ sequence numbers */
+#define ISCSI_INITIAL_SN    (1)
+
+/* KWQ (kernel work queue) layer codes */
+#define ISCSI_KWQE_LAYER_CODE   (6)
+
+/* KWQ (kernel work queue) request op codes */
+#define ISCSI_KWQE_OPCODE_OFFLOAD_CONN1 (0)
+#define ISCSI_KWQE_OPCODE_OFFLOAD_CONN2 (1)
+#define ISCSI_KWQE_OPCODE_UPDATE_CONN   (2)
+#define ISCSI_KWQE_OPCODE_DESTROY_CONN  (3)
+#define ISCSI_KWQE_OPCODE_INIT1         (4)
+#define ISCSI_KWQE_OPCODE_INIT2         (5)
+
+/* KCQ (kernel completion queue) response op codes */
+#define ISCSI_KCQE_OPCODE_OFFLOAD_CONN  (0x10)
+#define ISCSI_KCQE_OPCODE_UPDATE_CONN   (0x12)
+#define ISCSI_KCQE_OPCODE_DESTROY_CONN  (0x13)
+#define ISCSI_KCQE_OPCODE_INIT          (0x14)
+#define ISCSI_KCQE_OPCODE_FW_CLEAN_TASK	(0x15)
+#define ISCSI_KCQE_OPCODE_TCP_RESET     (0x16)
+#define ISCSI_KCQE_OPCODE_TCP_SYN       (0x17)
+#define ISCSI_KCQE_OPCODE_TCP_FIN       (0X18)
+#define ISCSI_KCQE_OPCODE_TCP_ERROR     (0x19)
+#define ISCSI_KCQE_OPCODE_CQ_EVENT_NOTIFICATION (0x20)
+#define ISCSI_KCQE_OPCODE_ISCSI_ERROR   (0x21)
+
+/* KCQ (kernel completion queue) completion status */
+#define ISCSI_KCQE_COMPLETION_STATUS_SUCCESS                            (0x0)
+#define ISCSI_KCQE_COMPLETION_STATUS_INVALID_OPCODE                     (0x1)
+#define ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE                  (0x2)
+#define ISCSI_KCQE_COMPLETION_STATUS_CTX_FREE_FAILURE                   (0x3)
+#define ISCSI_KCQE_COMPLETION_STATUS_NIC_ERROR                          (0x4)
+
+#define ISCSI_KCQE_COMPLETION_STATUS_HDR_DIG_ERR                        (0x5)
+#define ISCSI_KCQE_COMPLETION_STATUS_DATA_DIG_ERR                       (0x6)
+
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_UNEXPECTED_OPCODE     (0xa)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_OPCODE                (0xb)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_AHS_LEN               (0xc)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ITT                   (0xd)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_STATSN                (0xe)
+
+/* Response */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN            (0xf)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T              (0x10)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_IS_ZERO  (0x2c)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_TOO_BIG  (0x2d)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_0                 (0x11)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_1                 (0x12)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_2                 (0x13)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_3                 (0x14)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_4                 (0x15)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_5                 (0x16)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_6                 (0x17)
+
+/* Data-In */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_RCV_LEN        (0x18)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_RCV_PDU_LEN       (0x19)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_F_BIT_ZERO            (0x1a)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV          (0x1b)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATASN                (0x1c)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_BURST_LEN      (0x1d)
+
+/* R2T */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_BUFFER_OFF            (0x1f)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN                   (0x20)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_R2TSN                 (0x21)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0 (0x22)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1 (0x23)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_EXCEED       (0x24)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_IS_RSRV           (0x25)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_BURST_LEN         (0x26)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_NOT_ZERO (0x27)
+
+/* TMF */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REJECT_PDU_LEN        (0x28)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ASYNC_PDU_LEN         (0x29)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_NOPIN_PDU_LEN         (0x2a)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_IN_CLEANUP   (0x2b)
+
+/* IP/TCP processing errors: */
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_FRAGMENT               (0x40)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_OPTIONS                (0x41)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_URGENT_FLAG               (0x42)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_MAX_RTRANS                (0x43)
+
+/* iSCSI licensing errors */
+/* general iSCSI license not installed */
+#define ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED                (0x50)
+/* additional LOM specific iSCSI license not installed */
+#define ISCSI_KCQE_COMPLETION_STATUS_LOM_ISCSI_NOT_ENABLED              (0x51)
+
+/* SQ/RQ/CQ DB structure sizes */
+#define ISCSI_SQ_DB_SIZE    (16)
+#define ISCSI_RQ_DB_SIZE    (16)
+#define ISCSI_CQ_DB_SIZE    (80)
+
+#define ISCSI_SQN_TO_NOTIFY_NOT_VALID                                   0xFFFF
+
+/* Page size codes (for flags field in connection offload request) */
+#define ISCSI_PAGE_SIZE_256     (0)
+#define ISCSI_PAGE_SIZE_512     (1)
+#define ISCSI_PAGE_SIZE_1K      (2)
+#define ISCSI_PAGE_SIZE_2K      (3)
+#define ISCSI_PAGE_SIZE_4K      (4)
+#define ISCSI_PAGE_SIZE_8K      (5)
+#define ISCSI_PAGE_SIZE_16K     (6)
+#define ISCSI_PAGE_SIZE_32K     (7)
+#define ISCSI_PAGE_SIZE_64K     (8)
+#define ISCSI_PAGE_SIZE_128K    (9)
+#define ISCSI_PAGE_SIZE_256K    (10)
+#define ISCSI_PAGE_SIZE_512K    (11)
+#define ISCSI_PAGE_SIZE_1M      (12)
+#define ISCSI_PAGE_SIZE_2M      (13)
+#define ISCSI_PAGE_SIZE_4M      (14)
+#define ISCSI_PAGE_SIZE_8M      (15)
+
+/* Iscsi PDU related defines */
+#define ISCSI_HEADER_SIZE   (48)
+#define ISCSI_DIGEST_SHIFT  (2)
+#define ISCSI_DIGEST_SIZE   (4)
+
+#define B577XX_ISCSI_CONNECTION_TYPE    3
+
+#endif /*__57XX_ISCSI_CONSTANTS_H_ */
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_hsi.h b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
new file mode 100644
index 0000000..36af1af
--- /dev/null
+++ b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
@@ -0,0 +1,1509 @@
+/* 57xx_iscsi_hsi.h: Broadcom NetXtreme II iSCSI HSI.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+#ifndef __57XX_ISCSI_HSI_LINUX_LE__
+#define __57XX_ISCSI_HSI_LINUX_LE__
+
+/*
+ * iSCSI Async CQE
+ */
+struct bnx2i_async_msg {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 reserved2;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved5;
+	u8 err_code;
+	u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved4;
+	u8 err_code;
+	u16 reserved5;
+#endif
+	u32 reserved6;
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u8 async_event;
+	u8 async_vcode;
+	u16 param1;
+#elif defined(__LITTLE_ENDIAN)
+	u16 param1;
+	u8 async_vcode;
+	u8 async_event;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 param2;
+	u16 param3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 param3;
+	u16 param2;
+#endif
+	u32 reserved7[3];
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Buffer Descriptor (BD)
+ */
+struct iscsi_bd {
+	u32 buffer_addr_hi;
+	u32 buffer_addr_lo;
+#if defined(__BIG_ENDIAN)
+	u16 reserved0;
+	u16 buffer_length;
+#elif defined(__LITTLE_ENDIAN)
+	u16 buffer_length;
+	u16 reserved0;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u16 flags;
+#define ISCSI_BD_RESERVED1 (0x3F<<0)
+#define ISCSI_BD_RESERVED1_SHIFT 0
+#define ISCSI_BD_LAST_IN_BD_CHAIN (0x1<<6)
+#define ISCSI_BD_LAST_IN_BD_CHAIN_SHIFT 6
+#define ISCSI_BD_FIRST_IN_BD_CHAIN (0x1<<7)
+#define ISCSI_BD_FIRST_IN_BD_CHAIN_SHIFT 7
+#define ISCSI_BD_RESERVED2 (0xFF<<8)
+#define ISCSI_BD_RESERVED2_SHIFT 8
+#elif defined(__LITTLE_ENDIAN)
+	u16 flags;
+#define ISCSI_BD_RESERVED1 (0x3F<<0)
+#define ISCSI_BD_RESERVED1_SHIFT 0
+#define ISCSI_BD_LAST_IN_BD_CHAIN (0x1<<6)
+#define ISCSI_BD_LAST_IN_BD_CHAIN_SHIFT 6
+#define ISCSI_BD_FIRST_IN_BD_CHAIN (0x1<<7)
+#define ISCSI_BD_FIRST_IN_BD_CHAIN_SHIFT 7
+#define ISCSI_BD_RESERVED2 (0xFF<<8)
+#define ISCSI_BD_RESERVED2_SHIFT 8
+	u16 reserved3;
+#endif
+};
+
+
+/*
+ * iSCSI Cleanup SQ WQE
+ */
+struct bnx2i_cleanup_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 reserved2[3];
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u16 itt;
+#define ISCSI_CLEANUP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_CLEANUP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_REQUEST_TYPE_SHIFT 14
+	u16 reserved3;
+#endif
+	u32 reserved4[10];
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved6;
+	u16 reserved5;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved5;
+	u8 reserved6;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Cleanup CQE
+ */
+struct bnx2i_cleanup_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 status;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 status;
+	u8 op_code;
+#endif
+	u32 reserved1[3];
+	u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5[7];
+#if defined(__BIG_ENDIAN)
+	u16 reserved6;
+	u16 itt;
+#define ISCSI_CLEANUP_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_CLEANUP_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_RESPONSE_TYPE_SHIFT 14
+	u16 reserved6;
+#endif
+	u32 cq_req_sn;
+};
+
+
+/*
+ * SCSI read/write SQ WQE
+ */
+struct bnx2i_cmd_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_CMD_REQUEST_TASK_ATTR (0x7<<0)
+#define ISCSI_CMD_REQUEST_TASK_ATTR_SHIFT 0
+#define ISCSI_CMD_REQUEST_RESERVED1 (0x3<<3)
+#define ISCSI_CMD_REQUEST_RESERVED1_SHIFT 3
+#define ISCSI_CMD_REQUEST_WRITE (0x1<<5)
+#define ISCSI_CMD_REQUEST_WRITE_SHIFT 5
+#define ISCSI_CMD_REQUEST_READ (0x1<<6)
+#define ISCSI_CMD_REQUEST_READ_SHIFT 6
+#define ISCSI_CMD_REQUEST_FINAL (0x1<<7)
+#define ISCSI_CMD_REQUEST_FINAL_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_CMD_REQUEST_TASK_ATTR (0x7<<0)
+#define ISCSI_CMD_REQUEST_TASK_ATTR_SHIFT 0
+#define ISCSI_CMD_REQUEST_RESERVED1 (0x3<<3)
+#define ISCSI_CMD_REQUEST_RESERVED1_SHIFT 3
+#define ISCSI_CMD_REQUEST_WRITE (0x1<<5)
+#define ISCSI_CMD_REQUEST_WRITE_SHIFT 5
+#define ISCSI_CMD_REQUEST_READ (0x1<<6)
+#define ISCSI_CMD_REQUEST_READ_SHIFT 6
+#define ISCSI_CMD_REQUEST_FINAL (0x1<<7)
+#define ISCSI_CMD_REQUEST_FINAL_SHIFT 7
+	u8 op_code;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 ud_buffer_offset;
+	u16 sd_buffer_offset;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sd_buffer_offset;
+	u16 ud_buffer_offset;
+#endif
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved2;
+	u16 itt;
+#define ISCSI_CMD_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CMD_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CMD_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_CMD_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CMD_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CMD_REQUEST_TYPE_SHIFT 14
+	u16 reserved2;
+#endif
+	u32 total_data_transfer_length;
+	u32 cmd_sn;
+	u32 reserved3;
+	u32 cdb[4];
+	u32 zero_fill;
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 sd_start_bd_index;
+	u8 ud_start_bd_index;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 ud_start_bd_index;
+	u8 sd_start_bd_index;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * task statistics for write response
+ */
+struct bnx2i_write_resp_task_stat {
+	u32 num_data_ins;
+};
+
+/*
+ * task statistics for read response
+ */
+struct bnx2i_read_resp_task_stat {
+#if defined(__BIG_ENDIAN)
+	u16 num_data_outs;
+	u16 num_r2ts;
+#elif defined(__LITTLE_ENDIAN)
+	u16 num_r2ts;
+	u16 num_data_outs;
+#endif
+};
+
+/*
+ * task statistics for iSCSI cmd response
+ */
+union bnx2i_cmd_resp_task_stat {
+	struct bnx2i_write_resp_task_stat write_stat;
+	struct bnx2i_read_resp_task_stat read_stat;
+};
+
+/*
+ * SCSI Command CQE
+ */
+struct bnx2i_cmd_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 response_flags;
+#define ISCSI_CMD_RESPONSE_RESERVED0 (0x1<<0)
+#define ISCSI_CMD_RESPONSE_RESERVED0_SHIFT 0
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW (0x1<<1)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW_SHIFT 1
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW (0x1<<2)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW_SHIFT 2
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW (0x1<<3)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW_SHIFT 3
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW (0x1<<4)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW_SHIFT 4
+#define ISCSI_CMD_RESPONSE_RESERVED1 (0x7<<5)
+#define ISCSI_CMD_RESPONSE_RESERVED1_SHIFT 5
+	u8 response;
+	u8 status;
+#elif defined(__LITTLE_ENDIAN)
+	u8 status;
+	u8 response;
+	u8 response_flags;
+#define ISCSI_CMD_RESPONSE_RESERVED0 (0x1<<0)
+#define ISCSI_CMD_RESPONSE_RESERVED0_SHIFT 0
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW (0x1<<1)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW_SHIFT 1
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW (0x1<<2)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW_SHIFT 2
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW (0x1<<3)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW_SHIFT 3
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW (0x1<<4)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW_SHIFT 4
+#define ISCSI_CMD_RESPONSE_RESERVED1 (0x7<<5)
+#define ISCSI_CMD_RESPONSE_RESERVED1_SHIFT 5
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved2;
+	u32 residual_count;
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5[5];
+	union bnx2i_cmd_resp_task_stat task_stat;
+	u32 reserved6;
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u16 itt;
+#define ISCSI_CMD_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CMD_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CMD_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_CMD_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CMD_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CMD_RESPONSE_TYPE_SHIFT 14
+	u16 reserved7;
+#endif
+	u32 cq_req_sn;
+};
+
+
+
+/*
+ * firmware middle-path request SQ WQE
+ */
+struct bnx2i_fw_mp_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+	u16 hdr_opaque1;
+#elif defined(__LITTLE_ENDIAN)
+	u16 hdr_opaque1;
+	u8 op_attr;
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 hdr_opaque2[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved0;
+	u16 itt;
+#define ISCSI_FW_MP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_FW_MP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_FW_MP_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_FW_MP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_FW_MP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_FW_MP_REQUEST_TYPE_SHIFT 14
+	u16 reserved0;
+#endif
+	u32 hdr_opaque3[4];
+	u32 resp_bd_list_addr_lo;
+	u32 resp_bd_list_addr_hi;
+	u32 resp_buffer;
+#define ISCSI_FW_MP_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_FW_MP_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_FW_MP_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 reserved3;
+	u8 flags;
+#define ISCSI_FW_MP_REQUEST_RESERVED1 (0x1<<0)
+#define ISCSI_FW_MP_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_FW_MP_REQUEST_RESERVED2 (0x1F<<3)
+#define ISCSI_FW_MP_REQUEST_RESERVED2_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+	u8 flags;
+#define ISCSI_FW_MP_REQUEST_RESERVED1 (0x1<<0)
+#define ISCSI_FW_MP_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_FW_MP_REQUEST_RESERVED2 (0x1F<<3)
+#define ISCSI_FW_MP_REQUEST_RESERVED2_SHIFT 3
+	u8 reserved3;
+	u16 reserved4;
+#endif
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved6;
+	u8 reserved5;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved5;
+	u8 reserved6;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * firmware response - CQE: used only by firmware
+ */
+struct bnx2i_fw_response {
+	u32 hdr_dword1[2];
+	u32 hdr_exp_cmd_sn;
+	u32 hdr_max_cmd_sn;
+	u32 hdr_ttt;
+	u32 hdr_res_cnt;
+	u32 cqe_flags;
+#define ISCSI_FW_RESPONSE_RESERVED2 (0xFF<<0)
+#define ISCSI_FW_RESPONSE_RESERVED2_SHIFT 0
+#define ISCSI_FW_RESPONSE_ERR_CODE (0xFF<<8)
+#define ISCSI_FW_RESPONSE_ERR_CODE_SHIFT 8
+#define ISCSI_FW_RESPONSE_RESERVED3 (0xFFFF<<16)
+#define ISCSI_FW_RESPONSE_RESERVED3_SHIFT 16
+	u32 stat_sn;
+	u32 hdr_dword2[2];
+	u32 hdr_dword3[2];
+	u32 task_stat;
+	u32 reserved0;
+	u32 hdr_itt;
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI KCQ CQE parameters
+ */
+union iscsi_kcqe_params {
+	u32 reserved0[4];
+};
+
+/*
+ * iSCSI KCQ CQE
+ */
+struct iscsi_kcqe {
+	u32 iscsi_conn_id;
+	u32 completion_status;
+	u32 iscsi_conn_context_id;
+	union iscsi_kcqe_params params;
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define ISCSI_KCQE_RESERVED0 (0xF<<0)
+#define ISCSI_KCQE_RESERVED0_SHIFT 0
+#define ISCSI_KCQE_LAYER_CODE (0x7<<4)
+#define ISCSI_KCQE_LAYER_CODE_SHIFT 4
+#define ISCSI_KCQE_RESERVED1 (0x1<<7)
+#define ISCSI_KCQE_RESERVED1_SHIFT 7
+	u8 op_code;
+	u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+	u16 qe_self_seq;
+	u8 op_code;
+	u8 flags;
+#define ISCSI_KCQE_RESERVED0 (0xF<<0)
+#define ISCSI_KCQE_RESERVED0_SHIFT 0
+#define ISCSI_KCQE_LAYER_CODE (0x7<<4)
+#define ISCSI_KCQE_LAYER_CODE_SHIFT 4
+#define ISCSI_KCQE_RESERVED1 (0x1<<7)
+#define ISCSI_KCQE_RESERVED1_SHIFT 7
+#endif
+};
+
+
+
+/*
+ * iSCSI KWQE header
+ */
+struct iscsi_kwqe_header {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define ISCSI_KWQE_HEADER_RESERVED0 (0xF<<0)
+#define ISCSI_KWQE_HEADER_RESERVED0_SHIFT 0
+#define ISCSI_KWQE_HEADER_LAYER_CODE (0x7<<4)
+#define ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT 4
+#define ISCSI_KWQE_HEADER_RESERVED1 (0x1<<7)
+#define ISCSI_KWQE_HEADER_RESERVED1_SHIFT 7
+	u8 op_code;
+#elif defined(__LITTLE_ENDIAN)
+	u8 op_code;
+	u8 flags;
+#define ISCSI_KWQE_HEADER_RESERVED0 (0xF<<0)
+#define ISCSI_KWQE_HEADER_RESERVED0_SHIFT 0
+#define ISCSI_KWQE_HEADER_LAYER_CODE (0x7<<4)
+#define ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT 4
+#define ISCSI_KWQE_HEADER_RESERVED1 (0x1<<7)
+#define ISCSI_KWQE_HEADER_RESERVED1_SHIFT 7
+#endif
+};
+
+/*
+ * iSCSI firmware init request 1
+ */
+struct iscsi_kwqe_init1 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u8 reserved0;
+	u8 num_cqs;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_cqs;
+	u8 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 dummy_buffer_addr_lo;
+	u32 dummy_buffer_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u16 num_ccells_per_conn;
+	u16 num_tasks_per_conn;
+#elif defined(__LITTLE_ENDIAN)
+	u16 num_tasks_per_conn;
+	u16 num_ccells_per_conn;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 sq_wqes_per_page;
+	u16 sq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_num_wqes;
+	u16 sq_wqes_per_page;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 cq_log_wqes_per_page;
+	u8 flags;
+#define ISCSI_KWQE_INIT1_PAGE_SIZE (0xF<<0)
+#define ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT 0
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE (0x1<<4)
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE_SHIFT 4
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE (0x1<<5)
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE_SHIFT 5
+#define ISCSI_KWQE_INIT1_RESERVED1 (0x3<<6)
+#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 6
+	u16 cq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+	u16 cq_num_wqes;
+	u8 flags;
+#define ISCSI_KWQE_INIT1_PAGE_SIZE (0xF<<0)
+#define ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT 0
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE (0x1<<4)
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE_SHIFT 4
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE (0x1<<5)
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE_SHIFT 5
+#define ISCSI_KWQE_INIT1_RESERVED1 (0x3<<6)
+#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 6
+	u8 cq_log_wqes_per_page;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 cq_num_pages;
+	u16 sq_num_pages;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_num_pages;
+	u16 cq_num_pages;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 rq_buffer_size;
+	u16 rq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+	u16 rq_num_wqes;
+	u16 rq_buffer_size;
+#endif
+};
+
+/*
+ * iSCSI firmware init request 2
+ */
+struct iscsi_kwqe_init2 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 max_cq_sqn;
+#elif defined(__LITTLE_ENDIAN)
+	u16 max_cq_sqn;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 error_bit_map[2];
+	u32 reserved1[5];
+};
+
+/*
+ * Initial iSCSI connection offload request 1
+ */
+struct iscsi_kwqe_conn_offload1 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 iscsi_conn_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 iscsi_conn_id;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 sq_page_table_addr_lo;
+	u32 sq_page_table_addr_hi;
+	u32 cq_page_table_addr_lo;
+	u32 cq_page_table_addr_hi;
+	u32 reserved0[3];
+};
+
+/*
+ * iSCSI Page Table Entry (PTE)
+ */
+struct iscsi_pte {
+	u32 hi;
+	u32 lo;
+};
+
+/*
+ * Initial iSCSI connection offload request 2
+ */
+struct iscsi_kwqe_conn_offload2 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 rq_page_table_addr_lo;
+	u32 rq_page_table_addr_hi;
+	struct iscsi_pte sq_first_pte;
+	struct iscsi_pte cq_first_pte;
+	u32 num_additional_wqes;
+};
+
+
+/*
+ * Initial iSCSI connection offload request 3
+ */
+struct iscsi_kwqe_conn_offload3 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 reserved1;
+	struct iscsi_pte qp_first_pte[3];
+};
+
+
+/*
+ * iSCSI connection update request
+ */
+struct iscsi_kwqe_conn_update {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 session_error_recovery_level;
+	u8 max_outstanding_r2ts;
+	u8 reserved2;
+	u8 conn_flags;
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST (0x1<<0)
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST_SHIFT 0
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST (0x1<<1)
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST_SHIFT 1
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T (0x1<<2)
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T_SHIFT 2
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA (0x1<<3)
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA_SHIFT 3
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1 (0xF<<4)
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1_SHIFT 4
+#elif defined(__LITTLE_ENDIAN)
+	u8 conn_flags;
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST (0x1<<0)
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST_SHIFT 0
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST (0x1<<1)
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST_SHIFT 1
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T (0x1<<2)
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T_SHIFT 2
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA (0x1<<3)
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA_SHIFT 3
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1 (0xF<<4)
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1_SHIFT 4
+	u8 reserved2;
+	u8 max_outstanding_r2ts;
+	u8 session_error_recovery_level;
+#endif
+	u32 context_id;
+	u32 max_send_pdu_length;
+	u32 max_recv_pdu_length;
+	u32 first_burst_length;
+	u32 max_burst_length;
+	u32 exp_stat_sn;
+};
+
+/*
+ * iSCSI destroy connection request
+ */
+struct iscsi_kwqe_conn_destroy {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 context_id;
+	u32 reserved1[6];
+};
+
+/*
+ * iSCSI KWQ WQE
+ */
+union iscsi_kwqe {
+	struct iscsi_kwqe_init1 init1;
+	struct iscsi_kwqe_init2 init2;
+	struct iscsi_kwqe_conn_offload1 conn_offload1;
+	struct iscsi_kwqe_conn_offload2 conn_offload2;
+	struct iscsi_kwqe_conn_update conn_update;
+	struct iscsi_kwqe_conn_destroy conn_destroy;
+};
+
+/*
+ * iSCSI Login SQ WQE
+ */
+struct bnx2i_login_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_REQUEST_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_REQUEST_CONT (0x1<<6)
+#define ISCSI_LOGIN_REQUEST_CONT_SHIFT 6
+#define ISCSI_LOGIN_REQUEST_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_REQUEST_TRANSIT_SHIFT 7
+	u8 version_max;
+	u8 version_min;
+#elif defined(__LITTLE_ENDIAN)
+	u8 version_min;
+	u8 version_max;
+	u8 op_attr;
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_REQUEST_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_REQUEST_CONT (0x1<<6)
+#define ISCSI_LOGIN_REQUEST_CONT_SHIFT 6
+#define ISCSI_LOGIN_REQUEST_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_REQUEST_TRANSIT_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 isid_lo;
+#if defined(__BIG_ENDIAN)
+	u16 isid_hi;
+	u16 tsih;
+#elif defined(__LITTLE_ENDIAN)
+	u16 tsih;
+	u16 isid_hi;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserved2;
+	u16 itt;
+#define ISCSI_LOGIN_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGIN_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_LOGIN_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGIN_REQUEST_TYPE_SHIFT 14
+	u16 reserved2;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 cid;
+	u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved3;
+	u16 cid;
+#endif
+	u32 cmd_sn;
+	u32 exp_stat_sn;
+	u32 reserved4;
+	u32 resp_bd_list_addr_lo;
+	u32 resp_bd_list_addr_hi;
+	u32 resp_buffer;
+#define ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_LOGIN_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+	u16 reserved8;
+	u8 reserved7;
+	u8 flags;
+#define ISCSI_LOGIN_REQUEST_RESERVED5 (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_RESERVED5_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED6 (0x1F<<3)
+#define ISCSI_LOGIN_REQUEST_RESERVED6_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+	u8 flags;
+#define ISCSI_LOGIN_REQUEST_RESERVED5 (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_RESERVED5_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED6 (0x1F<<3)
+#define ISCSI_LOGIN_REQUEST_RESERVED6_SHIFT 3
+	u8 reserved7;
+	u16 reserved8;
+#endif
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved10;
+	u8 reserved9;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved9;
+	u8 reserved10;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Login CQE
+ */
+struct bnx2i_login_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 response_flags;
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_RESPONSE_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_RESPONSE_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_RESPONSE_CONT (0x1<<6)
+#define ISCSI_LOGIN_RESPONSE_CONT_SHIFT 6
+#define ISCSI_LOGIN_RESPONSE_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_RESPONSE_TRANSIT_SHIFT 7
+	u8 version_max;
+	u8 version_active;
+#elif defined(__LITTLE_ENDIAN)
+	u8 version_active;
+	u8 version_max;
+	u8 response_flags;
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_RESPONSE_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_RESPONSE_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_RESPONSE_CONT (0x1<<6)
+#define ISCSI_LOGIN_RESPONSE_CONT_SHIFT 6
+#define ISCSI_LOGIN_RESPONSE_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_RESPONSE_TRANSIT_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved1[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u8 err_code;
+	u8 reserved2;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved2;
+	u8 err_code;
+	u16 reserved3;
+#endif
+	u32 stat_sn;
+	u32 isid_lo;
+#if defined(__BIG_ENDIAN)
+	u16 isid_hi;
+	u16 tsih;
+#elif defined(__LITTLE_ENDIAN)
+	u16 tsih;
+	u16 isid_hi;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 status_class;
+	u8 status_detail;
+	u16 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved4;
+	u8 status_detail;
+	u8 status_class;
+#endif
+	u32 reserved5[3];
+#if defined(__BIG_ENDIAN)
+	u16 reserved6;
+	u16 itt;
+#define ISCSI_LOGIN_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGIN_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_LOGIN_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGIN_RESPONSE_TYPE_SHIFT 14
+	u16 reserved6;
+#endif
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Logout SQ WQE
+ */
+struct bnx2i_logout_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_LOGOUT_REQUEST_REASON (0x7F<<0)
+#define ISCSI_LOGOUT_REQUEST_REASON_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_LOGOUT_REQUEST_REASON (0x7F<<0)
+#define ISCSI_LOGOUT_REQUEST_REASON_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 reserved1[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved2;
+	u16 itt;
+#define ISCSI_LOGOUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_LOGOUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_REQUEST_TYPE_SHIFT 14
+	u16 reserved2;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 cid;
+	u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved3;
+	u16 cid;
+#endif
+	u32 cmd_sn;
+	u32 reserved4[5];
+	u32 zero_fill;
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved6;
+	u8 reserved5;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved5;
+	u8 reserved6;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Logout CQE
+ */
+struct bnx2i_logout_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u8 response;
+	u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved0;
+	u8 response;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 reserved2;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved5;
+	u8 err_code;
+	u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved4;
+	u8 err_code;
+	u16 reserved5;
+#endif
+	u32 reserved6[3];
+#if defined(__BIG_ENDIAN)
+	u16 time_to_wait;
+	u16 time_to_retain;
+#elif defined(__LITTLE_ENDIAN)
+	u16 time_to_retain;
+	u16 time_to_wait;
+#endif
+	u32 reserved7[3];
+#if defined(__BIG_ENDIAN)
+	u16 reserved8;
+	u16 itt;
+#define ISCSI_LOGOUT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_LOGOUT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_RESPONSE_TYPE_SHIFT 14
+	u16 reserved8;
+#endif
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Nop-In CQE
+ */
+struct bnx2i_nop_in_msg {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 ttt;
+	u32 reserved2;
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5;
+	u32 lun[2];
+	u32 reserved6[4];
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u16 itt;
+#define ISCSI_NOP_IN_MSG_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_IN_MSG_INDEX_SHIFT 0
+#define ISCSI_NOP_IN_MSG_TYPE (0x3<<14)
+#define ISCSI_NOP_IN_MSG_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_NOP_IN_MSG_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_IN_MSG_INDEX_SHIFT 0
+#define ISCSI_NOP_IN_MSG_TYPE (0x3<<14)
+#define ISCSI_NOP_IN_MSG_TYPE_SHIFT 14
+	u16 reserved7;
+#endif
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI NOP-OUT SQ WQE
+ */
+struct bnx2i_nop_out_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1 (0x7F<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1 (0x7F<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved2;
+	u16 itt;
+#define ISCSI_NOP_OUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_NOP_OUT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_NOP_OUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_NOP_OUT_REQUEST_TYPE_SHIFT 14
+	u16 reserved2;
+#endif
+	u32 ttt;
+	u32 cmd_sn;
+	u32 reserved3[2];
+	u32 resp_bd_list_addr_lo;
+	u32 resp_bd_list_addr_hi;
+	u32 resp_buffer;
+#define ISCSI_NOP_OUT_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_NOP_OUT_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u8 reserved6;
+	u8 flags;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4 (0x1<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL (0x3F<<2)
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL_SHIFT 2
+#elif defined(__LITTLE_ENDIAN)
+	u8 flags;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4 (0x1<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL (0x3F<<2)
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL_SHIFT 2
+	u8 reserved6;
+	u16 reserved7;
+#endif
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved9;
+	u8 reserved8;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved8;
+	u8 reserved9;
+	u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI Reject CQE
+ */
+struct bnx2i_reject_msg {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u8 reason;
+	u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved0;
+	u8 reason;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5[8];
+	u32 cq_req_sn;
+};
+
+/*
+ * bnx2i iSCSI TMF SQ WQE
+ */
+struct bnx2i_tmf_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_TMF_REQUEST_FUNCTION (0x7F<<0)
+#define ISCSI_TMF_REQUEST_FUNCTION_SHIFT 0
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_TMF_REQUEST_FUNCTION (0x7F<<0)
+#define ISCSI_TMF_REQUEST_FUNCTION_SHIFT 0
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved1;
+	u16 itt;
+#define ISCSI_TMF_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TMF_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TMF_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_TMF_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TMF_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TMF_REQUEST_TYPE_SHIFT 14
+	u16 reserved1;
+#endif
+	u32 ref_itt;
+	u32 cmd_sn;
+	u32 reserved2;
+	u32 ref_cmd_sn;
+	u32 reserved3[3];
+	u32 zero_fill;
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved5;
+	u8 reserved4;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved4;
+	u8 reserved5;
+	u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI Text SQ WQE
+ */
+struct bnx2i_text_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_TEXT_REQUEST_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_REQUEST_CONT (0x1<<6)
+#define ISCSI_TEXT_REQUEST_CONT_SHIFT 6
+#define ISCSI_TEXT_REQUEST_FINAL (0x1<<7)
+#define ISCSI_TEXT_REQUEST_FINAL_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_TEXT_REQUEST_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_REQUEST_CONT (0x1<<6)
+#define ISCSI_TEXT_REQUEST_CONT_SHIFT 6
+#define ISCSI_TEXT_REQUEST_FINAL (0x1<<7)
+#define ISCSI_TEXT_REQUEST_FINAL_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u16 itt;
+#define ISCSI_TEXT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TEXT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TEXT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_TEXT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TEXT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TEXT_REQUEST_TYPE_SHIFT 14
+	u16 reserved3;
+#endif
+	u32 ttt;
+	u32 cmd_sn;
+	u32 reserved4[2];
+	u32 resp_bd_list_addr_lo;
+	u32 resp_bd_list_addr_hi;
+	u32 resp_buffer;
+#define ISCSI_TEXT_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_TEXT_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_TEXT_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_TEXT_REQUEST_NUM_RESP_BDS_SHIFT 24
+	u32 zero_fill;
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved7;
+	u8 reserved6;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved6;
+	u8 reserved7;
+	u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI SQ WQE
+ */
+union iscsi_request {
+	struct bnx2i_cmd_request cmd;
+	struct bnx2i_tmf_request tmf;
+	struct bnx2i_nop_out_request nop_out;
+	struct bnx2i_login_request login_req;
+	struct bnx2i_text_request text;
+	struct bnx2i_logout_request logout_req;
+	struct bnx2i_cleanup_request cleanup;
+};
+
+
+/*
+ * iSCSI TMF CQE
+ */
+struct bnx2i_tmf_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u8 response;
+	u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved0;
+	u8 response;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 reserved2;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved5;
+	u8 err_code;
+	u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved4;
+	u8 err_code;
+	u16 reserved5;
+#endif
+	u32 reserved6[7];
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u16 itt;
+#define ISCSI_TMF_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TMF_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TMF_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_TMF_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TMF_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TMF_RESPONSE_TYPE_SHIFT 14
+	u16 reserved7;
+#endif
+	u32 cq_req_sn;
+};
+
+/*
+ * iSCSI Text CQE
+ */
+struct bnx2i_text_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 response_flags;
+#define ISCSI_TEXT_RESPONSE_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_RESPONSE_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_CONT (0x1<<6)
+#define ISCSI_TEXT_RESPONSE_CONT_SHIFT 6
+#define ISCSI_TEXT_RESPONSE_FINAL (0x1<<7)
+#define ISCSI_TEXT_RESPONSE_FINAL_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 response_flags;
+#define ISCSI_TEXT_RESPONSE_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_RESPONSE_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_CONT (0x1<<6)
+#define ISCSI_TEXT_RESPONSE_CONT_SHIFT 6
+#define ISCSI_TEXT_RESPONSE_FINAL (0x1<<7)
+#define ISCSI_TEXT_RESPONSE_FINAL_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 ttt;
+	u32 reserved2;
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5;
+	u32 lun[2];
+	u32 reserved6[4];
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u16 itt;
+#define ISCSI_TEXT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TEXT_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_TEXT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TEXT_RESPONSE_TYPE_SHIFT 14
+	u16 reserved7;
+#endif
+	u32 cq_req_sn;
+};
+
+/*
+ * iSCSI CQE
+ */
+union iscsi_response {
+	struct bnx2i_cmd_response cmd;
+	struct bnx2i_tmf_response tmf;
+	struct bnx2i_login_response login_resp;
+	struct bnx2i_text_response text;
+	struct bnx2i_logout_response logout_resp;
+	struct bnx2i_cleanup_response cleanup;
+	struct bnx2i_reject_msg reject;
+	struct bnx2i_async_msg async;
+	struct bnx2i_nop_in_msg nop_in;
+};
+
+#endif /* __57XX_ISCSI_HSI_LINUX_LE__ */
diff --git a/drivers/scsi/bnx2i/Kconfig b/drivers/scsi/bnx2i/Kconfig
new file mode 100644
index 0000000..820d428
--- /dev/null
+++ b/drivers/scsi/bnx2i/Kconfig
@@ -0,0 +1,7 @@
+config SCSI_BNX2_ISCSI
+	tristate "Broadcom NetXtreme II iSCSI support"
+	select SCSI_ISCSI_ATTRS
+	select CNIC
+	---help---
+	This driver supports iSCSI offload for the Broadcom NetXtreme II
+	devices.
diff --git a/drivers/scsi/bnx2i/Makefile b/drivers/scsi/bnx2i/Makefile
new file mode 100644
index 0000000..b5802bd
--- /dev/null
+++ b/drivers/scsi/bnx2i/Makefile
@@ -0,0 +1,3 @@
+bnx2i-y := bnx2i_init.o bnx2i_hwi.o bnx2i_iscsi.o bnx2i_sysfs.o
+
+obj-$(CONFIG_SCSI_BNX2_ISCSI) += bnx2i.o
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
new file mode 100644
index 0000000..d7576f2
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -0,0 +1,771 @@
+/* bnx2i.h: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#ifndef _BNX2I_H_
+#define _BNX2I_H_
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/in.h>
+#include <linux/kfifo.h>
+#include <linux/netdevice.h>
+#include <linux/completion.h>
+
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi.h>
+#include <scsi/iscsi_proto.h>
+#include <scsi/libiscsi.h>
+#include <scsi/scsi_transport_iscsi.h>
+
+#include "../../net/cnic_if.h"
+#include "57xx_iscsi_hsi.h"
+#include "57xx_iscsi_constants.h"
+
+#define BNX2_ISCSI_DRIVER_NAME		"bnx2i"
+
+#define BNX2I_MAX_ADAPTERS		8
+
+#define ISCSI_MAX_CONNS_PER_HBA		128
+#define ISCSI_MAX_SESS_PER_HBA		ISCSI_MAX_CONNS_PER_HBA
+#define ISCSI_MAX_CMDS_PER_SESS		128
+
+/* Total active commands across all connections supported by devices */
+#define ISCSI_MAX_CMDS_PER_HBA_5708	(28 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+#define ISCSI_MAX_CMDS_PER_HBA_5709	(128 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+#define ISCSI_MAX_CMDS_PER_HBA_57710	(256 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+
+#define ISCSI_MAX_BDS_PER_CMD		32
+
+#define MAX_PAGES_PER_CTRL_STRUCT_POOL	8
+#define BNX2I_RESERVED_SLOW_PATH_CMD_SLOTS	4
+
+/* 5706/08 hardware has limit on maximum buffer size per BD it can handle */
+#define MAX_BD_LENGTH			65535
+#define BD_SPLIT_SIZE			32768
+
+/* min, max & default values for SQ/RQ/CQ size, configurable via' modparam */
+#define BNX2I_SQ_WQES_MIN 		16
+#define BNX2I_570X_SQ_WQES_MAX 		128
+#define BNX2I_5770X_SQ_WQES_MAX 	512
+#define BNX2I_570X_SQ_WQES_DEFAULT 	128
+#define BNX2I_5770X_SQ_WQES_DEFAULT 	256
+
+#define BNX2I_570X_CQ_WQES_MAX 		128
+#define BNX2I_5770X_CQ_WQES_MAX 	512
+
+#define BNX2I_RQ_WQES_MIN 		16
+#define BNX2I_RQ_WQES_MAX 		32
+#define BNX2I_RQ_WQES_DEFAULT 		16
+
+/* CCELLs per conn */
+#define BNX2I_CCELLS_MIN		16
+#define BNX2I_CCELLS_MAX		96
+#define BNX2I_CCELLS_DEFAULT		64
+
+#define ITT_INVALID_SIGNATURE		0xFFFF
+
+#define ISCSI_CMD_CLEANUP_TIMEOUT	100
+
+#define BNX2I_CONN_CTX_BUF_SIZE		16384
+
+#define BNX2I_SQ_WQE_SIZE		64
+#define BNX2I_RQ_WQE_SIZE		256
+#define BNX2I_CQE_SIZE			64
+
+#define MB_KERNEL_CTX_SHIFT		8
+#define MB_KERNEL_CTX_SIZE		(1 << MB_KERNEL_CTX_SHIFT)
+
+#define CTX_SHIFT			7
+#define GET_CID_NUM(cid_addr)		((cid_addr) >> CTX_SHIFT)
+
+#define CTX_OFFSET 			0x10000
+#define MAX_CID_CNT			0x4000
+
+/* 5709 context registers */
+#define BNX2_MQ_CONFIG2			0x00003d00
+#define BNX2_MQ_CONFIG2_CONT_SZ		(0x7L<<4)
+#define BNX2_MQ_CONFIG2_FIRST_L4L5	(0x1fL<<8)
+
+/* 57710's BAR2 is mapped to doorbell registers */
+#define BNX2X_DOORBELL_PCI_BAR		2
+#define BNX2X_MAX_CQS			8
+
+#define CNIC_ARM_CQE			1
+#define CNIC_DISARM_CQE			0
+
+#define REG_RD(__hba, offset)				\
+		readl(__hba->regview + offset)
+#define REG_WR(__hba, offset, val)			\
+		writel(val, __hba->regview + offset)
+
+
+/**
+ * struct generic_pdu_resc - login pdu resource structure
+ *
+ * @req_buf:            driver buffer used to stage payload associated with
+ *                      the login request
+ * @req_dma_addr:       dma address for iscsi login request payload buffer
+ * @req_buf_size:       actual login request payload length
+ * @req_wr_ptr:         pointer into login request buffer when next data is
+ *                      to be written
+ * @resp_hdr:           iscsi header where iscsi login response header is to
+ *                      be recreated
+ * @resp_buf:           buffer to stage login response payload
+ * @resp_dma_addr:      login response payload buffer dma address
+ * @resp_buf_size:      login response paylod length
+ * @resp_wr_ptr:        pointer into login response buffer when next data is
+ *                      to be written
+ * @req_bd_tbl:         iscsi login request payload BD table
+ * @req_bd_dma:         login request BD table dma address
+ * @resp_bd_tbl:        iscsi login response payload BD table
+ * @resp_bd_dma:        login request BD table dma address
+ *
+ * following structure defines buffer info for generic pdus such as iSCSI Login,
+ *	Logout and NOP
+ */
+struct generic_pdu_resc {
+	char *req_buf;
+	dma_addr_t req_dma_addr;
+	u32 req_buf_size;
+	char *req_wr_ptr;
+	struct iscsi_hdr resp_hdr;
+	char *resp_buf;
+	dma_addr_t resp_dma_addr;
+	u32 resp_buf_size;
+	char *resp_wr_ptr;
+	char *req_bd_tbl;
+	dma_addr_t req_bd_dma;
+	char *resp_bd_tbl;
+	dma_addr_t resp_bd_dma;
+};
+
+
+/**
+ * struct bd_resc_page - tracks DMA'able memory allocated for BD tables
+ *
+ * @link:               list head to link elements
+ * @max_ptrs:           maximun pointers that can be stored in this page
+ * @num_valid:          number of pointer valid in this page
+ * @page:               base addess for page pointer array
+ *
+ * structure to track DMA'able memory allocated for command BD tables
+ */
+struct bd_resc_page {
+	struct list_head link;
+	u32 max_ptrs;
+	u32 num_valid;
+	void *page[1];
+};
+
+
+/**
+ * struct io_bdt - I/O buffer destricptor table
+ *
+ * @bd_tbl:             BD table's virtual address
+ * @bd_tbl_dma:         BD table's dma address
+ * @bd_valid:           num valid BD entries
+ *
+ * IO BD table
+ */
+struct io_bdt {
+	struct iscsi_bd *bd_tbl;
+	dma_addr_t bd_tbl_dma;
+	u16 bd_valid;
+};
+
+
+/**
+ * bnx2i_cmd - iscsi command structure
+ *
+ * @scsi_cmd:           SCSI-ML task pointer corresponding to this iscsi cmd
+ * @sg:                 SG list
+ * @io_tbl:             buffer descriptor (BD) table
+ * @bd_tbl_dma:         buffer descriptor (BD) table's dma address
+ */
+struct bnx2i_cmd {
+	struct iscsi_hdr hdr;
+	struct bnx2i_conn *conn;
+	struct scsi_cmnd *scsi_cmd;
+	struct scatterlist *sg;
+	struct io_bdt io_tbl;
+	dma_addr_t bd_tbl_dma;
+	struct bnx2i_cmd_request req;
+};
+
+
+/**
+ * struct bnx2i_conn - iscsi connection structure
+ *
+ * @cls_conn:              pointer to iscsi cls conn
+ * @hba:                   adapter structure pointer
+ * @iscsi_conn_cid:        iscsi conn id
+ * @fw_cid:                firmware iscsi context id
+ * @ep:                    endpoint structure pointer
+ * @gen_pdu:               login/nopout/logout pdu resources
+ * @violation_notified:    bit mask used to track iscsi error/warning messages
+ *                         already printed out
+ *
+ * iSCSI connection structure
+ */
+struct bnx2i_conn {
+	struct iscsi_cls_conn *cls_conn;
+	struct bnx2i_hba *hba;
+	struct completion cmd_cleanup_cmpl;
+	int is_bound;
+
+	u32 iscsi_conn_cid;
+#define BNX2I_CID_RESERVED	0x5AFF
+	u32 fw_cid;
+
+	struct timer_list poll_timer;
+	/*
+	 * Queue Pair (QP) related structure elements.
+	 */
+	struct bnx2i_endpoint *ep;
+
+	/*
+	 * Buffer for login negotiation process
+	 */
+	struct generic_pdu_resc gen_pdu;
+	u64 violation_notified;
+};
+
+
+
+/**
+ * struct iscsi_cid_queue - Per adapter iscsi cid queue
+ *
+ * @cid_que_base:           queue base memory
+ * @cid_que:                queue memory pointer
+ * @cid_q_prod_idx:         produce index
+ * @cid_q_cons_idx:         consumer index
+ * @cid_q_max_idx:          max index. used to detect wrap around condition
+ * @cid_free_cnt:           queue size
+ * @conn_cid_tbl:           iscsi cid to conn structure mapping table
+ *
+ * Per adapter iSCSI CID Queue
+ */
+struct iscsi_cid_queue {
+	void *cid_que_base;
+	u32 *cid_que;
+	u32 cid_q_prod_idx;
+	u32 cid_q_cons_idx;
+	u32 cid_q_max_idx;
+	u32 cid_free_cnt;
+	struct bnx2i_conn **conn_cid_tbl;
+};
+
+/**
+ * struct bnx2i_hba - bnx2i adapter structure
+ *
+ * @link:                  list head to link elements
+ * @cnic:                  pointer to cnic device
+ * @pcidev:                pointer to pci dev
+ * @netdev:                pointer to netdev structure
+ * @regview:               mapped PCI register space
+ * @age:                   age, incremented by every recovery
+ * @cnic_dev_type:         cnic device type, 5706/5708/5709/57710
+ * @mail_queue_access:     mailbox queue access mode, applicable to 5709 only
+ * @reg_with_cnic:         indicates whether the device is register with CNIC
+ * @adapter_state:         adapter state, UP, GOING_DOWN, LINK_DOWN
+ * @mtu_supported:         Ethernet MTU supported
+ * @shost:                 scsi host pointer
+ * @max_sqes:              SQ size
+ * @max_rqes:              RQ size
+ * @max_cqes:              CQ size
+ * @num_ccell:             number of command cells per connection
+ * @ofld_conns_active:     active connection list
+ * @max_active_conns:      max offload connections supported by this device
+ * @cid_que:               iscsi cid queue
+ * @ep_rdwr_lock:          read / write lock to synchronize various ep lists
+ * @ep_ofld_list:          connection list for pending offload completion
+ * @ep_destroy_list:       connection list for pending offload completion
+ * @mp_bd_tbl:             BD table to be used with middle path requests
+ * @mp_bd_dma:             DMA address of 'mp_bd_tbl' memory buffer
+ * @dummy_buffer:          Dummy buffer to be used with zero length scsicmd reqs
+ * @dummy_buf_dma:         DMA address of 'dummy_buffer' memory buffer
+ * @lock:              	   lock to synchonize access to hba structure
+ * @pci_did:               PCI device ID
+ * @pci_vid:               PCI vendor ID
+ * @pci_sdid:              PCI subsystem device ID
+ * @pci_svid:              PCI subsystem vendor ID
+ * @pci_func:              PCI function number in system pci tree
+ * @pci_devno:             PCI device number in system pci tree
+ * @num_wqe_sent:          statistic counter, total wqe's sent
+ * @num_cqe_rcvd:          statistic counter, total cqe's received
+ * @num_intr_claimed:      statistic counter, total interrupts claimed
+ * @link_changed_count:    statistic counter, num of link change notifications
+ *                         received
+ * @ipaddr_changed_count:  statistic counter, num times IP address changed while
+ *                         at least one connection is offloaded
+ * @num_sess_opened:       statistic counter, total num sessions opened
+ * @num_conn_opened:       statistic counter, total num conns opened on this hba
+ * @ctx_ccell_tasks:       captures number of ccells and tasks supported by
+ *                         currently offloaded connection, used to decode
+ *                         context memory
+ *
+ * Adapter Data Structure
+ */
+struct bnx2i_hba {
+	struct list_head link;
+	struct cnic_dev *cnic;
+	struct pci_dev *pcidev;
+	struct net_device *netdev;
+	void __iomem *regview;
+
+	u32 age;
+	unsigned long cnic_dev_type;
+		#define BNX2I_NX2_DEV_5706		0x0
+		#define BNX2I_NX2_DEV_5708		0x1
+		#define BNX2I_NX2_DEV_5709		0x2
+		#define BNX2I_NX2_DEV_57710		0x3
+	u32 mail_queue_access;
+		#define BNX2I_MQ_KERNEL_MODE		0x0
+		#define BNX2I_MQ_KERNEL_BYPASS_MODE	0x1
+		#define BNX2I_MQ_BIN_MODE		0x2
+	unsigned long  reg_with_cnic;
+		#define BNX2I_CNIC_REGISTERED		1
+
+	unsigned long  adapter_state;
+		#define ADAPTER_STATE_UP		0
+		#define ADAPTER_STATE_GOING_DOWN	1
+		#define ADAPTER_STATE_LINK_DOWN		2
+		#define ADAPTER_STATE_INIT_FAILED	31
+	unsigned int mtu_supported;
+		#define BNX2I_MAX_MTU_SUPPORTED		1500
+
+	struct Scsi_Host *shost;
+
+	u32 max_sqes;
+	u32 max_rqes;
+	u32 max_cqes;
+	u32 num_ccell;
+
+	int ofld_conns_active;
+
+	int max_active_conns;
+	struct iscsi_cid_queue cid_que;
+
+	rwlock_t ep_rdwr_lock;
+	struct list_head ep_ofld_list;
+	struct list_head ep_destroy_list;
+
+	/*
+	 * BD table to be used with MP (Middle Path requests.
+	 */
+	char *mp_bd_tbl;
+	dma_addr_t mp_bd_dma;
+	char *dummy_buffer;
+	dma_addr_t dummy_buf_dma;
+
+	spinlock_t lock;	/* protects hba structure access */
+	struct mutex net_dev_lock;/* sync net device access */
+
+	/*
+	 * PCI related info.
+	 */
+	u16 pci_did;
+	u16 pci_vid;
+	u16 pci_sdid;
+	u16 pci_svid;
+	u16 pci_func;
+	u16 pci_devno;
+
+	/*
+	 * Following are a bunch of statistics useful during development
+	 * and later stage for score boarding.
+	 */
+	u32 num_wqe_sent;
+	u32 num_cqe_rcvd;
+	u32 num_intr_claimed;
+	u32 link_changed_count;
+	u32 ipaddr_changed_count;
+	u32 num_sess_opened;
+	u32 num_conn_opened;
+	unsigned int ctx_ccell_tasks;
+};
+
+
+/*******************************************************************************
+ * 	QP [ SQ / RQ / CQ ] info.
+ ******************************************************************************/
+
+/*
+ * SQ/RQ/CQ generic structure definition
+ */
+struct 	sqe {
+	u8 sqe_byte[BNX2I_SQ_WQE_SIZE];
+};
+
+struct 	rqe {
+	u8 rqe_byte[BNX2I_RQ_WQE_SIZE];
+};
+
+struct 	cqe {
+	u8 cqe_byte[BNX2I_CQE_SIZE];
+};
+
+
+enum {
+#if defined(__LITTLE_ENDIAN)
+	CNIC_EVENT_COAL_INDEX	= 0x0,
+	CNIC_SEND_DOORBELL	= 0x4,
+	CNIC_EVENT_CQ_ARM	= 0x7,
+	CNIC_RECV_DOORBELL	= 0x8
+#elif defined(__BIG_ENDIAN)
+	CNIC_EVENT_COAL_INDEX	= 0x2,
+	CNIC_SEND_DOORBELL	= 0x6,
+	CNIC_EVENT_CQ_ARM	= 0x4,
+	CNIC_RECV_DOORBELL	= 0xa
+#endif
+};
+
+
+/*
+ * CQ DB
+ */
+struct bnx2x_iscsi_cq_pend_cmpl {
+	/* CQ producer, updated by Ustorm */
+	u16 ustrom_prod;
+	/* CQ pending completion counter */
+	u16 pend_cntr;
+};
+
+
+struct bnx2i_5771x_cq_db {
+	struct bnx2x_iscsi_cq_pend_cmpl qp_pend_cmpl[BNX2X_MAX_CQS];
+	/* CQ pending completion ITT array */
+	u16 itt[BNX2X_MAX_CQS];
+	/* Cstorm CQ sequence to notify array, updated by driver */;
+	u16 sqn[BNX2X_MAX_CQS];
+	u32 reserved[4] /* 16 byte allignment */;
+};
+
+
+struct bnx2i_5771x_sq_rq_db {
+	u16 prod_idx;
+	u8 reserved0[14]; /* Pad structure size to 16 bytes */
+};
+
+
+struct bnx2i_5771x_dbell_hdr {
+	u8 header;
+	/* 1 for rx doorbell, 0 for tx doorbell */
+#define B577XX_DOORBELL_HDR_RX				(0x1<<0)
+#define B577XX_DOORBELL_HDR_RX_SHIFT			0
+	/* 0 for normal doorbell, 1 for advertise wnd doorbell */
+#define B577XX_DOORBELL_HDR_DB_TYPE			(0x1<<1)
+#define B577XX_DOORBELL_HDR_DB_TYPE_SHIFT		1
+	/* rdma tx only: DPM transaction size specifier (64/128/256/512B) */
+#define B577XX_DOORBELL_HDR_DPM_SIZE			(0x3<<2)
+#define B577XX_DOORBELL_HDR_DPM_SIZE_SHIFT		2
+	/* connection type */
+#define B577XX_DOORBELL_HDR_CONN_TYPE			(0xF<<4)
+#define B577XX_DOORBELL_HDR_CONN_TYPE_SHIFT		4
+};
+
+struct bnx2i_5771x_dbell {
+	struct bnx2i_5771x_dbell_hdr dbell;
+	u8 pad[3];
+
+};
+
+/**
+ * struct qp_info - QP (share queue region) atrributes structure
+ *
+ * @ctx_base:           ioremapped pci register base to access doorbell register
+ *                      pertaining to this offloaded connection
+ * @sq_virt:            virtual address of send queue (SQ) region
+ * @sq_phys:            DMA address of SQ memory region
+ * @sq_mem_size:        SQ size
+ * @sq_prod_qe:         SQ producer entry pointer
+ * @sq_cons_qe:         SQ consumer entry pointer
+ * @sq_first_qe:        virtaul address of first entry in SQ
+ * @sq_last_qe:         virtaul address of last entry in SQ
+ * @sq_prod_idx:        SQ producer index
+ * @sq_cons_idx:        SQ consumer index
+ * @sqe_left:           number sq entry left
+ * @sq_pgtbl_virt:      page table describing buffer consituting SQ region
+ * @sq_pgtbl_phys:      dma address of 'sq_pgtbl_virt'
+ * @sq_pgtbl_size:      SQ page table size
+ * @cq_virt:            virtual address of completion queue (CQ) region
+ * @cq_phys:            DMA address of RQ memory region
+ * @cq_mem_size:        CQ size
+ * @cq_prod_qe:         CQ producer entry pointer
+ * @cq_cons_qe:         CQ consumer entry pointer
+ * @cq_first_qe:        virtaul address of first entry in CQ
+ * @cq_last_qe:         virtaul address of last entry in CQ
+ * @cq_prod_idx:        CQ producer index
+ * @cq_cons_idx:        CQ consumer index
+ * @cqe_left:           number cq entry left
+ * @cqe_size:           size of each CQ entry
+ * @cqe_exp_seq_sn:     next expected CQE sequence number
+ * @cq_pgtbl_virt:      page table describing buffer consituting CQ region
+ * @cq_pgtbl_phys:      dma address of 'cq_pgtbl_virt'
+ * @cq_pgtbl_size:    	CQ page table size
+ * @rq_virt:            virtual address of receive queue (RQ) region
+ * @rq_phys:            DMA address of RQ memory region
+ * @rq_mem_size:        RQ size
+ * @rq_prod_qe:         RQ producer entry pointer
+ * @rq_cons_qe:         RQ consumer entry pointer
+ * @rq_first_qe:        virtaul address of first entry in RQ
+ * @rq_last_qe:         virtaul address of last entry in RQ
+ * @rq_prod_idx:        RQ producer index
+ * @rq_cons_idx:        RQ consumer index
+ * @rqe_left:           number rq entry left
+ * @rq_pgtbl_virt:      page table describing buffer consituting RQ region
+ * @rq_pgtbl_phys:      dma address of 'rq_pgtbl_virt'
+ * @rq_pgtbl_size:      RQ page table size
+ *
+ * queue pair (QP) is a per connection shared data structure which is used
+ *	to send work requests (SQ), receive completion notifications (CQ)
+ *	and receive asynchoronous / scsi sense info (RQ). 'qp_info' structure
+ *	below holds queue memory, consumer/producer indexes and page table
+ *	information
+ */
+struct qp_info {
+	void __iomem *ctx_base;
+#define DPM_TRIGER_TYPE			0x40
+
+#define BNX2I_570x_QUE_DB_SIZE		0
+#define BNX2I_5771x_QUE_DB_SIZE		16
+	struct sqe *sq_virt;
+	dma_addr_t sq_phys;
+	u32 sq_mem_size;
+
+	struct sqe *sq_prod_qe;
+	struct sqe *sq_cons_qe;
+	struct sqe *sq_first_qe;
+	struct sqe *sq_last_qe;
+	u16 sq_prod_idx;
+	u16 sq_cons_idx;
+	u32 sqe_left;
+
+	void *sq_pgtbl_virt;
+	dma_addr_t sq_pgtbl_phys;
+	u32 sq_pgtbl_size;	/* set to PAGE_SIZE for 5708 & 5709 */
+
+	struct cqe *cq_virt;
+	dma_addr_t cq_phys;
+	u32 cq_mem_size;
+
+	struct cqe *cq_prod_qe;
+	struct cqe *cq_cons_qe;
+	struct cqe *cq_first_qe;
+	struct cqe *cq_last_qe;
+	u16 cq_prod_idx;
+	u16 cq_cons_idx;
+	u32 cqe_left;
+	u32 cqe_size;
+	u32 cqe_exp_seq_sn;
+
+	void *cq_pgtbl_virt;
+	dma_addr_t cq_pgtbl_phys;
+	u32 cq_pgtbl_size;	/* set to PAGE_SIZE for 5708 & 5709 */
+
+	struct rqe *rq_virt;
+	dma_addr_t rq_phys;
+	u32 rq_mem_size;
+
+	struct rqe *rq_prod_qe;
+	struct rqe *rq_cons_qe;
+	struct rqe *rq_first_qe;
+	struct rqe *rq_last_qe;
+	u16 rq_prod_idx;
+	u16 rq_cons_idx;
+	u32 rqe_left;
+
+	void *rq_pgtbl_virt;
+	dma_addr_t rq_pgtbl_phys;
+	u32 rq_pgtbl_size;	/* set to PAGE_SIZE for 5708 & 5709 */
+};
+
+
+
+/*
+ * CID handles
+ */
+struct ep_handles {
+	u32 fw_cid;
+	u32 drv_iscsi_cid;
+	u16 pg_cid;
+	u16 rsvd;
+};
+
+
+enum {
+	EP_STATE_IDLE                   = 0x0,
+	EP_STATE_PG_OFLD_START          = 0x1,
+	EP_STATE_PG_OFLD_COMPL          = 0x2,
+	EP_STATE_OFLD_START             = 0x4,
+	EP_STATE_OFLD_COMPL             = 0x8,
+	EP_STATE_CONNECT_START          = 0x10,
+	EP_STATE_CONNECT_COMPL          = 0x20,
+	EP_STATE_ULP_UPDATE_START       = 0x40,
+	EP_STATE_ULP_UPDATE_COMPL       = 0x80,
+	EP_STATE_DISCONN_START          = 0x100,
+	EP_STATE_DISCONN_COMPL          = 0x200,
+	EP_STATE_CLEANUP_START          = 0x400,
+	EP_STATE_CLEANUP_CMPL           = 0x800,
+	EP_STATE_TCP_FIN_RCVD           = 0x1000,
+	EP_STATE_TCP_RST_RCVD           = 0x2000,
+	EP_STATE_PG_OFLD_FAILED         = 0x1000000,
+	EP_STATE_ULP_UPDATE_FAILED      = 0x2000000,
+	EP_STATE_CLEANUP_FAILED         = 0x4000000,
+	EP_STATE_OFLD_FAILED            = 0x8000000,
+	EP_STATE_CONNECT_FAILED         = 0x10000000,
+	EP_STATE_DISCONN_TIMEDOUT       = 0x20000000,
+};
+
+/**
+ * struct bnx2i_endpoint - representation of tcp connection in NX2 world
+ *
+ * @link:               list head to link elements
+ * @hba:                adapter to which this connection belongs
+ * @conn:               iscsi connection this EP is linked to
+ * @sess:               iscsi session this EP is linked to
+ * @cm_sk:              cnic sock struct
+ * @hba_age:            age to detect if 'iscsid' issues ep_disconnect()
+ *                      after HBA reset is completed by bnx2i/cnic/bnx2
+ *                      modules
+ * @state:              tracks offload connection state machine
+ * @teardown_mode:      indicates if conn teardown is abortive or orderly
+ * @qp:                 QP information
+ * @ids:                contains chip allocated *context id* & driver assigned
+ *                      *iscsi cid*
+ * @ofld_timer:         offload timer to detect timeout
+ * @ofld_wait:          wait queue
+ *
+ * Endpoint Structure - equivalent of tcp socket structure
+ */
+struct bnx2i_endpoint {
+	struct list_head link;
+	struct bnx2i_hba *hba;
+	struct bnx2i_conn *conn;
+	struct cnic_sock *cm_sk;
+	u32 hba_age;
+	u32 state;
+	unsigned long timestamp;
+	int num_active_cmds;
+
+	struct qp_info qp;
+	struct ep_handles ids;
+		#define ep_iscsi_cid	ids.drv_iscsi_cid
+		#define ep_cid		ids.fw_cid
+		#define ep_pg_cid	ids.pg_cid
+	struct timer_list ofld_timer;
+	wait_queue_head_t ofld_wait;
+};
+
+
+
+/* Global variables */
+extern unsigned int error_mask1, error_mask2;
+extern u64 iscsi_error_mask;
+extern unsigned int en_tcp_dack;
+extern unsigned int event_coal_div;
+
+extern struct scsi_transport_template *bnx2i_scsi_xport_template;
+extern struct iscsi_transport bnx2i_iscsi_transport;
+extern struct cnic_ulp_ops bnx2i_cnic_cb;
+
+extern unsigned int sq_size;
+extern unsigned int rq_size;
+
+extern struct device_attribute *bnx2i_dev_attributes[];
+
+
+
+/*
+ * Function Prototypes
+ */
+extern void bnx2i_identify_device(struct bnx2i_hba *hba);
+extern void bnx2i_register_device(struct bnx2i_hba *hba);
+
+extern void bnx2i_ulp_init(struct cnic_dev *dev);
+extern void bnx2i_ulp_exit(struct cnic_dev *dev);
+extern void bnx2i_start(void *handle);
+extern void bnx2i_stop(void *handle);
+extern void bnx2i_reg_dev_all(void);
+extern void bnx2i_unreg_dev_all(void);
+extern struct bnx2i_hba *get_adapter_list_head(void);
+
+struct bnx2i_conn *bnx2i_get_conn_from_id(struct bnx2i_hba *hba,
+					  u16 iscsi_cid);
+
+int bnx2i_alloc_ep_pool(void);
+void bnx2i_release_ep_pool(void);
+struct bnx2i_endpoint *bnx2i_ep_ofld_list_next(struct bnx2i_hba *hba);
+struct bnx2i_endpoint *bnx2i_ep_destroy_list_next(struct bnx2i_hba *hba);
+
+struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic);
+
+struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic);
+void bnx2i_free_hba(struct bnx2i_hba *hba);
+
+void bnx2i_get_rq_buf(struct bnx2i_conn *conn, char *ptr, int len);
+void bnx2i_put_rq_buf(struct bnx2i_conn *conn, int count);
+
+void bnx2i_iscsi_unmap_sg_list(struct bnx2i_cmd *cmd);
+
+void bnx2i_drop_session(struct iscsi_cls_session *session);
+
+extern int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba);
+extern int bnx2i_send_iscsi_login(struct bnx2i_conn *conn,
+				  struct iscsi_task *mtask);
+extern int bnx2i_send_iscsi_tmf(struct bnx2i_conn *conn,
+				  struct iscsi_task *mtask);
+extern int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *conn,
+				    struct bnx2i_cmd *cmnd);
+extern int bnx2i_send_iscsi_nopout(struct bnx2i_conn *conn,
+				   struct iscsi_task *mtask, u32 ttt,
+				   char *datap, int data_len, int unsol);
+extern int bnx2i_send_iscsi_logout(struct bnx2i_conn *conn,
+				   struct iscsi_task *mtask);
+extern void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba,
+				       struct bnx2i_cmd *cmd);
+extern void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba,
+				     struct bnx2i_endpoint *ep);
+extern void bnx2i_update_iscsi_conn(struct iscsi_conn *conn);
+extern void bnx2i_send_conn_destroy(struct bnx2i_hba *hba,
+				    struct bnx2i_endpoint *ep);
+
+extern int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba,
+			       struct bnx2i_endpoint *ep);
+extern void bnx2i_free_qp_resc(struct bnx2i_hba *hba,
+			       struct bnx2i_endpoint *ep);
+extern void bnx2i_ep_ofld_timer(unsigned long data);
+extern struct bnx2i_endpoint *bnx2i_find_ep_in_ofld_list(
+		struct bnx2i_hba *hba, u32 iscsi_cid);
+extern struct bnx2i_endpoint *bnx2i_find_ep_in_destroy_list(
+		struct bnx2i_hba *hba, u32 iscsi_cid);
+
+extern int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep);
+extern void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action);
+
+/* Debug related function prototypes */
+extern void bnx2i_print_pend_cmd_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_active_cmd_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_xmit_pdu_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_recv_state(struct bnx2i_conn *conn);
+
+#endif
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
new file mode 100644
index 0000000..906cef5
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -0,0 +1,2405 @@
+/* bnx2i_hwi.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include <scsi/scsi_tcq.h>
+#include <scsi/libiscsi.h>
+#include "bnx2i.h"
+
+/**
+ * bnx2i_get_cid_num - get cid from ep
+ * @ep: 	endpoint pointer
+ *
+ * Only applicable to 57710 family of devices
+ */
+static u32 bnx2i_get_cid_num(struct bnx2i_endpoint *ep)
+{
+	u32 cid;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+		cid = ep->ep_cid;
+	else
+		cid = GET_CID_NUM(ep->ep_cid);
+	return cid;
+}
+
+
+/**
+ * bnx2i_adjust_qp_size - Adjust SQ/RQ/CQ size for 57710 device type
+ * @hba: 		Adapter for which adjustments is to be made
+ *
+ * Only applicable to 57710 family of devices
+ */
+static void bnx2i_adjust_qp_size(struct bnx2i_hba *hba)
+{
+	u32 num_elements_per_pg;
+
+	if (test_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type) ||
+	    test_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type) ||
+	    test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
+		if (!is_power_of_2(hba->max_sqes))
+			hba->max_sqes = rounddown_pow_of_two(hba->max_sqes);
+
+		if (!is_power_of_2(hba->max_rqes))
+			hba->max_rqes = rounddown_pow_of_two(hba->max_rqes);
+	}
+
+	/* Adjust each queue size if the user selection does not
+	 * yield integral num of page buffers
+	 */
+	/* adjust SQ */
+	num_elements_per_pg = PAGE_SIZE / BNX2I_SQ_WQE_SIZE;
+	if (hba->max_sqes < num_elements_per_pg)
+		hba->max_sqes = num_elements_per_pg;
+	else if (hba->max_sqes % num_elements_per_pg)
+		hba->max_sqes = (hba->max_sqes + num_elements_per_pg - 1) &
+				 ~(num_elements_per_pg - 1);
+
+	/* adjust CQ */
+	num_elements_per_pg = PAGE_SIZE / BNX2I_CQE_SIZE;
+	if (hba->max_cqes < num_elements_per_pg)
+		hba->max_cqes = num_elements_per_pg;
+	else if (hba->max_cqes % num_elements_per_pg)
+		hba->max_cqes = (hba->max_cqes + num_elements_per_pg - 1) &
+				 ~(num_elements_per_pg - 1);
+
+	/* adjust RQ */
+	num_elements_per_pg = PAGE_SIZE / BNX2I_RQ_WQE_SIZE;
+	if (hba->max_rqes < num_elements_per_pg)
+		hba->max_rqes = num_elements_per_pg;
+	else if (hba->max_rqes % num_elements_per_pg)
+		hba->max_rqes = (hba->max_rqes + num_elements_per_pg - 1) &
+				 ~(num_elements_per_pg - 1);
+}
+
+
+/**
+ * bnx2i_get_link_state - get network interface link state
+ * @hba:	adapter instance pointer
+ *
+ * updates adapter structure flag based on netdev state
+ */
+static void bnx2i_get_link_state(struct bnx2i_hba *hba)
+{
+	if (test_bit(__LINK_STATE_NOCARRIER, &hba->netdev->state))
+		set_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
+	else
+		clear_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
+}
+
+
+/**
+ * bnx2i_iscsi_license_error - displays iscsi license related error message
+ * @hba:		adapter instance pointer
+ * @error_code:		error classification
+ *
+ * Puts out an error log when driver is unable to offload iscsi connection
+ *	due to license restrictions
+ */
+static void bnx2i_iscsi_license_error(struct bnx2i_hba *hba, u32 error_code)
+{
+	if (error_code == ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED)
+		/* iSCSI offload not supported on this device */
+		printk(KERN_ERR "bnx2i: iSCSI not supported, dev=%s\n",
+				hba->netdev->name);
+	if (error_code == ISCSI_KCQE_COMPLETION_STATUS_LOM_ISCSI_NOT_ENABLED)
+		/* iSCSI offload not supported on this LOM device */
+		printk(KERN_ERR "bnx2i: LOM is not enable to "
+				"offload iSCSI connections, dev=%s\n",
+				hba->netdev->name);
+	set_bit(ADAPTER_STATE_INIT_FAILED, &hba->adapter_state);
+}
+
+
+/**
+ * bnx2i_arm_cq_event_coalescing - arms CQ to enable EQ notification
+ * @ep:		endpoint (transport indentifier) structure
+ * @action:	action, ARM or DISARM. For now only ARM_CQE is used
+ *
+ * Arm'ing CQ will enable chip to generate global EQ events inorder to interrupt
+ *	the driver. EQ event is generated CQ index is hit or at least 1 CQ is
+ *	outstanding and on chip timer expires
+ */
+void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action)
+{
+	struct bnx2i_5771x_cq_db *cq_db;
+	u16 cq_index;
+
+	if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+		return;
+
+	if (action == CNIC_ARM_CQE) {
+		cq_index = ep->qp.cqe_exp_seq_sn +
+			   ep->num_active_cmds / event_coal_div;
+		cq_index %= (ep->qp.cqe_size * 2 + 1);
+		if (!cq_index) {
+			cq_index = 1;
+			cq_db = (struct bnx2i_5771x_cq_db *)
+					ep->qp.cq_pgtbl_virt;
+			cq_db->sqn[0] = cq_index;
+		}
+	}
+}
+
+
+/**
+ * bnx2i_get_rq_buf - copy RQ buffer contents to driver buffer
+ * @conn:		iscsi connection on which RQ event occured
+ * @ptr:		driver buffer to which RQ buffer contents is to
+ *			be copied
+ * @len:		length of valid data inside RQ buf
+ *
+ * Copies RQ buffer contents from shared (DMA'able) memory region to
+ *	driver buffer. RQ is used to DMA unsolicitated iscsi pdu's and
+ *	scsi sense info
+ */
+void bnx2i_get_rq_buf(struct bnx2i_conn *bnx2i_conn, char *ptr, int len)
+{
+	if (!bnx2i_conn->ep->qp.rqe_left)
+		return;
+
+	bnx2i_conn->ep->qp.rqe_left--;
+	memcpy(ptr, (u8 *) bnx2i_conn->ep->qp.rq_cons_qe, len);
+	if (bnx2i_conn->ep->qp.rq_cons_qe == bnx2i_conn->ep->qp.rq_last_qe) {
+		bnx2i_conn->ep->qp.rq_cons_qe = bnx2i_conn->ep->qp.rq_first_qe;
+		bnx2i_conn->ep->qp.rq_cons_idx = 0;
+	} else {
+		bnx2i_conn->ep->qp.rq_cons_qe++;
+		bnx2i_conn->ep->qp.rq_cons_idx++;
+	}
+}
+
+
+static void bnx2i_ring_577xx_doorbell(struct bnx2i_conn *conn)
+{
+	struct bnx2i_5771x_dbell dbell;
+	u32 msg;
+
+	memset(&dbell, 0, sizeof(dbell));
+	dbell.dbell.header = (B577XX_ISCSI_CONNECTION_TYPE <<
+			      B577XX_DOORBELL_HDR_CONN_TYPE_SHIFT);
+	msg = *((u32 *)&dbell);
+	/* TODO : get doorbell register mapping */
+	writel(cpu_to_le32(msg), conn->ep->qp.ctx_base);
+}
+
+
+/**
+ * bnx2i_put_rq_buf - Replenish RQ buffer, if required ring on chip doorbell
+ * @conn:	iscsi connection on which event to post
+ * @count:	number of RQ buffer being posted to chip
+ *
+ * No need to ring hardware doorbell for 57710 family of devices
+ */
+void bnx2i_put_rq_buf(struct bnx2i_conn *bnx2i_conn, int count)
+{
+	struct bnx2i_5771x_sq_rq_db *rq_db;
+	u16 hi_bit = (bnx2i_conn->ep->qp.rq_prod_idx & 0x8000);
+	struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+
+	ep->qp.rqe_left += count;
+	ep->qp.rq_prod_idx &= 0x7FFF;
+	ep->qp.rq_prod_idx += count;
+
+	if (ep->qp.rq_prod_idx > bnx2i_conn->hba->max_rqes) {
+		ep->qp.rq_prod_idx %= bnx2i_conn->hba->max_rqes;
+		if (!hi_bit)
+			ep->qp.rq_prod_idx |= 0x8000;
+	} else
+		ep->qp.rq_prod_idx |= hi_bit;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+		rq_db = (struct bnx2i_5771x_sq_rq_db *) ep->qp.rq_pgtbl_virt;
+		rq_db->prod_idx = ep->qp.rq_prod_idx;
+		/* no need to ring hardware doorbell for 57710 */
+	} else {
+		writew(ep->qp.rq_prod_idx,
+		       ep->qp.ctx_base + CNIC_RECV_DOORBELL);
+	}
+	mmiowb();
+}
+
+
+/**
+ * bnx2i_ring_sq_dbell - Ring SQ doorbell to wake-up the processing engine
+ * @conn: 		iscsi connection to which new SQ entries belong
+ * @count: 		number of SQ WQEs to post
+ *
+ * SQ DB is updated in host memory and TX Doorbell is rung for 57710 family
+ *	of devices. For 5706/5708/5709 new SQ WQE count is written into the
+ *	doorbell register
+ */
+static void bnx2i_ring_sq_dbell(struct bnx2i_conn *bnx2i_conn, int count)
+{
+	struct bnx2i_5771x_sq_rq_db *sq_db;
+	struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+
+	ep->num_active_cmds++;
+	wmb();	/* flush SQ WQE memory before the doorbell is rung */
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+		sq_db = (struct bnx2i_5771x_sq_rq_db *) ep->qp.sq_pgtbl_virt;
+		sq_db->prod_idx = ep->qp.sq_prod_idx;
+		bnx2i_ring_577xx_doorbell(bnx2i_conn);
+	} else
+		writew(count, ep->qp.ctx_base + CNIC_SEND_DOORBELL);
+
+	mmiowb(); /* flush posted PCI writes */
+}
+
+
+/**
+ * bnx2i_ring_dbell_update_sq_params - update SQ driver parameters
+ * @conn:	iscsi connection to which new SQ entries belong
+ * @count:	number of SQ WQEs to post
+ *
+ * this routine will update SQ driver parameters and ring the doorbell
+ */
+static void bnx2i_ring_dbell_update_sq_params(struct bnx2i_conn *bnx2i_conn,
+					      int count)
+{
+	int tmp_cnt;
+
+	if (count == 1) {
+		if (bnx2i_conn->ep->qp.sq_prod_qe ==
+		    bnx2i_conn->ep->qp.sq_last_qe)
+			bnx2i_conn->ep->qp.sq_prod_qe =
+						bnx2i_conn->ep->qp.sq_first_qe;
+		else
+			bnx2i_conn->ep->qp.sq_prod_qe++;
+	} else {
+		if ((bnx2i_conn->ep->qp.sq_prod_qe + count) <=
+		    bnx2i_conn->ep->qp.sq_last_qe)
+			bnx2i_conn->ep->qp.sq_prod_qe += count;
+		else {
+			tmp_cnt = bnx2i_conn->ep->qp.sq_last_qe -
+				bnx2i_conn->ep->qp.sq_prod_qe;
+			bnx2i_conn->ep->qp.sq_prod_qe =
+				&bnx2i_conn->ep->qp.sq_first_qe[count -
+								(tmp_cnt + 1)];
+		}
+	}
+	bnx2i_conn->ep->qp.sq_prod_idx += count;
+	/* Ring the doorbell */
+	bnx2i_ring_sq_dbell(bnx2i_conn, bnx2i_conn->ep->qp.sq_prod_idx);
+}
+
+
+/**
+ * bnx2i_send_iscsi_login - post iSCSI login request MP WQE to hardware
+ * @conn:	iscsi connection
+ * @cmd:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI Login request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_login(struct bnx2i_conn *bnx2i_conn,
+			   struct iscsi_task *task)
+{
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_login_request *login_wqe;
+	struct iscsi_login *login_hdr;
+	u32 dword;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+	login_hdr = (struct iscsi_login *)task->hdr;
+	login_wqe = (struct bnx2i_login_request *)
+						bnx2i_conn->ep->qp.sq_prod_qe;
+
+	login_wqe->op_code = login_hdr->opcode;
+	login_wqe->op_attr = login_hdr->flags;
+	login_wqe->version_max = login_hdr->max_version;
+	login_wqe->version_min = login_hdr->min_version;
+	login_wqe->data_length = ntoh24(login_hdr->dlength);
+	login_wqe->isid_lo = *((u32 *) login_hdr->isid);
+	login_wqe->isid_hi = *((u16 *) login_hdr->isid + 2);
+	login_wqe->tsih = login_hdr->tsih;
+	login_wqe->itt = task->itt |
+		(ISCSI_TASK_TYPE_MPATH << ISCSI_LOGIN_REQUEST_TYPE_SHIFT);
+	login_wqe->cid = login_hdr->cid;
+
+	login_wqe->cmd_sn = be32_to_cpu(login_hdr->cmdsn);
+	login_wqe->exp_stat_sn = be32_to_cpu(login_hdr->exp_statsn);
+
+	login_wqe->resp_bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_bd_dma;
+	login_wqe->resp_bd_list_addr_hi =
+		(u32) ((u64) bnx2i_conn->gen_pdu.resp_bd_dma >> 32);
+
+	dword = ((1 << ISCSI_LOGIN_REQUEST_NUM_RESP_BDS_SHIFT) |
+		 (bnx2i_conn->gen_pdu.resp_buf_size <<
+		  ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT));
+	login_wqe->resp_buffer = dword;
+	login_wqe->flags = 0;
+	login_wqe->bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.req_bd_dma;
+	login_wqe->bd_list_addr_hi =
+		(u32) ((u64) bnx2i_conn->gen_pdu.req_bd_dma >> 32);
+	login_wqe->num_bds = 1;
+	login_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_tmf - post iSCSI task management request MP WQE to hardware
+ * @conn:	iscsi connection
+ * @mtask:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI Login request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
+			 struct iscsi_task *mtask)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_tm *tmfabort_hdr;
+	struct scsi_cmnd *ref_sc;
+	struct iscsi_task *ctask;
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_tmf_request *tmfabort_wqe;
+	u32 dword;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
+	tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
+	tmfabort_wqe = (struct bnx2i_tmf_request *)
+						bnx2i_conn->ep->qp.sq_prod_qe;
+
+	tmfabort_wqe->op_code = tmfabort_hdr->opcode;
+	tmfabort_wqe->op_attr = 0;
+	tmfabort_wqe->op_attr =
+		ISCSI_TMF_REQUEST_ALWAYS_ONE | ISCSI_TM_FUNC_ABORT_TASK;
+	tmfabort_wqe->lun[0] = be32_to_cpu(tmfabort_hdr->lun[0]);
+	tmfabort_wqe->lun[1] = be32_to_cpu(tmfabort_hdr->lun[1]);
+
+	tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14));
+	tmfabort_wqe->reserved2 = 0;
+	tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn);
+
+	ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt);
+	if (!ctask || ctask->sc)
+		/*
+		 * the iscsi layer must have completed the cmd while this
+		 * was starting up.
+		 */
+		return 0;
+	ref_sc = ctask->sc;
+
+	if (ref_sc->sc_data_direction == DMA_TO_DEVICE)
+		dword = (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+	else
+		dword = (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+	tmfabort_wqe->ref_itt = (dword | tmfabort_hdr->rtt);
+	tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn);
+
+	tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
+	tmfabort_wqe->bd_list_addr_hi = (u32)
+				((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+	tmfabort_wqe->num_bds = 1;
+	tmfabort_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_scsicmd - post iSCSI scsicmd request WQE to hardware
+ * @conn:	iscsi connection
+ * @cmd:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI SCSI-CMD request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *bnx2i_conn,
+			     struct bnx2i_cmd *cmd)
+{
+	struct bnx2i_cmd_request *scsi_cmd_wqe;
+
+	scsi_cmd_wqe = (struct bnx2i_cmd_request *)
+						bnx2i_conn->ep->qp.sq_prod_qe;
+	memcpy(scsi_cmd_wqe, &cmd->req, sizeof(struct bnx2i_cmd_request));
+	scsi_cmd_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_nopout - post iSCSI NOPOUT request WQE to hardware
+ * @conn:		iscsi connection
+ * @cmd:		driver command structure which is requesting
+ *			a WQE to sent to chip for further processing
+ * @ttt:		TTT to be used when building pdu header
+ * @datap:		payload buffer pointer
+ * @data_len:		payload data length
+ * @unsol:		indicated whether nopout pdu is unsolicited pdu or
+ *			in response to target's NOPIN w/ TTT != FFFFFFFF
+ *
+ * prepare and post a nopout request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn,
+			    struct iscsi_task *task, u32 ttt,
+			    char *datap, int data_len, int unsol)
+{
+	struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_nop_out_request *nopout_wqe;
+	struct iscsi_nopout *nopout_hdr;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+	nopout_hdr = (struct iscsi_nopout *)task->hdr;
+	nopout_wqe = (struct bnx2i_nop_out_request *)ep->qp.sq_prod_qe;
+	nopout_wqe->op_code = nopout_hdr->opcode;
+	nopout_wqe->op_attr = ISCSI_FLAG_CMD_FINAL;
+	memcpy(nopout_wqe->lun, nopout_hdr->lun, 8);
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+		u32 tmp = nopout_hdr->lun[0];
+		/* 57710 requires LUN field to be swapped */
+		nopout_hdr->lun[0] = nopout_hdr->lun[1];
+		nopout_hdr->lun[1] = tmp;
+	}
+
+	nopout_wqe->itt = ((u16)task->itt |
+			   (ISCSI_TASK_TYPE_MPATH <<
+			    ISCSI_TMF_REQUEST_TYPE_SHIFT));
+	nopout_wqe->ttt = ttt;
+	nopout_wqe->flags = 0;
+	if (!unsol)
+		nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
+	else if (nopout_hdr->itt == RESERVED_ITT)
+		nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
+
+	nopout_wqe->cmd_sn = be32_to_cpu(nopout_hdr->cmdsn);
+	nopout_wqe->data_length = data_len;
+	if (data_len) {
+		/* handle payload data, not required in first release */
+		printk(KERN_ALERT "NOPOUT: WARNING!! payload len != 0\n");
+	} else {
+		nopout_wqe->bd_list_addr_lo = (u32)
+					bnx2i_conn->hba->mp_bd_dma;
+		nopout_wqe->bd_list_addr_hi =
+			(u32) ((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+		nopout_wqe->num_bds = 1;
+	}
+	nopout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+
+/**
+ * bnx2i_send_iscsi_logout - post iSCSI logout request WQE to hardware
+ * @conn:	iscsi connection
+ * @cmd:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post logout request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_logout(struct bnx2i_conn *bnx2i_conn,
+			    struct iscsi_task *task)
+{
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_logout_request *logout_wqe;
+	struct iscsi_logout *logout_hdr;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+	logout_hdr = (struct iscsi_logout *)task->hdr;
+
+	logout_wqe = (struct bnx2i_logout_request *)
+						bnx2i_conn->ep->qp.sq_prod_qe;
+	memset(logout_wqe, 0x00, sizeof(struct bnx2i_logout_request));
+
+	logout_wqe->op_code = logout_hdr->opcode;
+	logout_wqe->cmd_sn = be32_to_cpu(logout_hdr->cmdsn);
+	logout_wqe->op_attr =
+			logout_hdr->flags | ISCSI_LOGOUT_REQUEST_ALWAYS_ONE;
+	logout_wqe->itt = ((u16)task->itt |
+			   (ISCSI_TASK_TYPE_MPATH <<
+			    ISCSI_LOGOUT_REQUEST_TYPE_SHIFT));
+	logout_wqe->data_length = 0;
+	logout_wqe->cid = 0;
+
+	logout_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
+	logout_wqe->bd_list_addr_hi = (u32)
+				((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+	logout_wqe->num_bds = 1;
+	logout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+
+/**
+ * bnx2i_update_iscsi_conn - post iSCSI logout request WQE to hardware
+ * @conn:	iscsi connection which requires iscsi parameter update
+ *
+ * sends down iSCSI Conn Update request to move iSCSI conn to FFP
+ */
+void bnx2i_update_iscsi_conn(struct iscsi_conn *conn)
+{
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct bnx2i_hba *hba = bnx2i_conn->hba;
+	struct kwqe *kwqe_arr[2];
+	struct iscsi_kwqe_conn_update *update_wqe;
+	struct iscsi_kwqe_conn_update conn_update_kwqe;
+
+	update_wqe = &conn_update_kwqe;
+
+	update_wqe->hdr.op_code = ISCSI_KWQE_OPCODE_UPDATE_CONN;
+	update_wqe->hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	/* 5771x requires conn context id to be passed as is */
+	if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_conn->ep->hba->cnic_dev_type))
+		update_wqe->context_id = bnx2i_conn->ep->ep_cid;
+	else
+		update_wqe->context_id = (bnx2i_conn->ep->ep_cid >> 7);
+	update_wqe->conn_flags = 0;
+	if (conn->hdrdgst_en)
+		update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST;
+	if (conn->datadgst_en)
+		update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST;
+	if (conn->session->initial_r2t_en)
+		update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T;
+	if (conn->session->imm_data_en)
+		update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA;
+
+	update_wqe->max_send_pdu_length = conn->max_xmit_dlength;
+	update_wqe->max_recv_pdu_length = conn->max_recv_dlength;
+	update_wqe->first_burst_length = conn->session->first_burst;
+	update_wqe->max_burst_length = conn->session->max_burst;
+	update_wqe->exp_stat_sn = conn->exp_statsn;
+	update_wqe->max_outstanding_r2ts = conn->session->max_r2t;
+	update_wqe->session_error_recovery_level = conn->session->erl;
+	iscsi_conn_printk(KERN_ALERT, conn,
+			  "bnx2i: conn update - MBL 0x%x FBL 0x%x"
+			  "MRDSL_I 0x%x MRDSL_T 0x%x \n",
+			  update_wqe->max_burst_length,
+			  update_wqe->first_burst_length,
+			  update_wqe->max_recv_pdu_length,
+			  update_wqe->max_send_pdu_length);
+
+	kwqe_arr[0] = (struct kwqe *) update_wqe;
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+}
+
+
+/**
+ * bnx2i_ep_ofld_timer - post iSCSI logout request WQE to hardware
+ * @data:	endpoint (transport handle) structure pointer
+ *
+ * routine to handle connection offload/destroy request timeout
+ */
+void bnx2i_ep_ofld_timer(unsigned long data)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) data;
+
+	if (ep->state == EP_STATE_OFLD_START) {
+		printk(KERN_ALERT "ofld_timer: CONN_OFLD timeout\n");
+		ep->state = EP_STATE_OFLD_FAILED;
+	} else if (ep->state == EP_STATE_DISCONN_START) {
+		printk(KERN_ALERT "ofld_timer: CONN_DISCON timeout\n");
+		ep->state = EP_STATE_DISCONN_TIMEDOUT;
+	} else if (ep->state == EP_STATE_CLEANUP_START) {
+		printk(KERN_ALERT "ofld_timer: CONN_CLEANUP timeout\n");
+		ep->state = EP_STATE_CLEANUP_FAILED;
+	}
+
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+static int bnx2i_power_of2(u32 val)
+{
+	u32 power = 0;
+	if (val & (val - 1))
+		return power;
+	val--;
+	while (val) {
+		val = val >> 1;
+		power++;
+	}
+	return power;
+}
+
+
+/**
+ * bnx2i_send_cmd_cleanup_req - send iscsi cmd context clean-up request
+ * @hba:	adapter structure pointer
+ * @cmd:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
+{
+	struct bnx2i_cleanup_request *cmd_cleanup;
+
+	cmd_cleanup =
+		(struct bnx2i_cleanup_request *)cmd->conn->ep->qp.sq_prod_qe;
+	memset(cmd_cleanup, 0x00, sizeof(struct bnx2i_cleanup_request));
+
+	cmd_cleanup->op_code = ISCSI_OPCODE_CLEANUP_REQUEST;
+	cmd_cleanup->itt = cmd->req.itt;
+	cmd_cleanup->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(cmd->conn, 1);
+}
+
+
+/**
+ * bnx2i_send_conn_destroy - initiates iscsi connection teardown process
+ * @hba:	adapter structure pointer
+ * @ep:		endpoint (transport indentifier) structure
+ *
+ * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE to initiate
+ * 	iscsi connection context clean-up process
+ */
+void bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+	struct kwqe *kwqe_arr[2];
+	struct iscsi_kwqe_conn_destroy conn_cleanup;
+
+	memset(&conn_cleanup, 0x00, sizeof(struct iscsi_kwqe_conn_destroy));
+
+	conn_cleanup.hdr.op_code = ISCSI_KWQE_OPCODE_DESTROY_CONN;
+	conn_cleanup.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+	/* 5771x requires conn context id to be passed as is */
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+		conn_cleanup.context_id = ep->ep_cid;
+	else
+		conn_cleanup.context_id = (ep->ep_cid >> 7);
+
+	conn_cleanup.reserved0 = (u16)ep->ep_iscsi_cid;
+
+	kwqe_arr[0] = (struct kwqe *) &conn_cleanup;
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+}
+
+
+/**
+ * bnx2i_570x_send_conn_ofld_req - initiates iscsi conn context setup process
+ * @hba: 		adapter structure pointer
+ * @ep: 		endpoint (transport indentifier) structure
+ *
+ * 5706/5708/5709 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
+					  struct bnx2i_endpoint *ep)
+{
+	struct kwqe *kwqe_arr[2];
+	struct iscsi_kwqe_conn_offload1 ofld_req1;
+	struct iscsi_kwqe_conn_offload2 ofld_req2;
+	dma_addr_t dma_addr;
+	int num_kwqes = 2;
+	u32 *ptbl;
+
+	ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
+	ofld_req1.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	ofld_req1.iscsi_conn_id = (u16) ep->ep_iscsi_cid;
+
+	dma_addr = ep->qp.sq_pgtbl_phys;
+	ofld_req1.sq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req1.sq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	dma_addr = ep->qp.cq_pgtbl_phys;
+	ofld_req1.cq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req1.cq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	ofld_req2.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN2;
+	ofld_req2.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	dma_addr = ep->qp.rq_pgtbl_phys;
+	ofld_req2.rq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req2.rq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	ptbl = (u32 *) ep->qp.sq_pgtbl_virt;
+
+	ofld_req2.sq_first_pte.hi = *ptbl++;
+	ofld_req2.sq_first_pte.lo = *ptbl;
+
+	ptbl = (u32 *) ep->qp.cq_pgtbl_virt;
+	ofld_req2.cq_first_pte.hi = *ptbl++;
+	ofld_req2.cq_first_pte.lo = *ptbl;
+
+	kwqe_arr[0] = (struct kwqe *) &ofld_req1;
+	kwqe_arr[1] = (struct kwqe *) &ofld_req2;
+	ofld_req2.num_additional_wqes = 0;
+
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+}
+
+
+/**
+ * bnx2i_5771x_send_conn_ofld_req - initiates iscsi connection context creation
+ * @hba: 		adapter structure pointer
+ * @ep: 		endpoint (transport indentifier) structure
+ *
+ * 57710 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
+					   struct bnx2i_endpoint *ep)
+{
+	struct kwqe *kwqe_arr[5];
+	struct iscsi_kwqe_conn_offload1 ofld_req1;
+	struct iscsi_kwqe_conn_offload2 ofld_req2;
+	struct iscsi_kwqe_conn_offload3 ofld_req3[1];
+	dma_addr_t dma_addr;
+	int num_kwqes = 2;
+	u32 *ptbl;
+
+	ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
+	ofld_req1.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	ofld_req1.iscsi_conn_id = (u16) ep->ep_iscsi_cid;
+
+	dma_addr = ep->qp.sq_pgtbl_phys + ISCSI_SQ_DB_SIZE;
+	ofld_req1.sq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req1.sq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	dma_addr = ep->qp.cq_pgtbl_phys + ISCSI_CQ_DB_SIZE;
+	ofld_req1.cq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req1.cq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	ofld_req2.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN2;
+	ofld_req2.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	dma_addr = ep->qp.rq_pgtbl_phys + ISCSI_RQ_DB_SIZE;
+	ofld_req2.rq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req2.rq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	ptbl = (u32 *)((u8 *)ep->qp.sq_pgtbl_virt + ISCSI_SQ_DB_SIZE);
+	ofld_req2.sq_first_pte.hi = *ptbl++;
+	ofld_req2.sq_first_pte.lo = *ptbl;
+
+	ptbl = (u32 *)((u8 *)ep->qp.cq_pgtbl_virt + ISCSI_CQ_DB_SIZE);
+	ofld_req2.cq_first_pte.hi = *ptbl++;
+	ofld_req2.cq_first_pte.lo = *ptbl;
+
+	kwqe_arr[0] = (struct kwqe *) &ofld_req1;
+	kwqe_arr[1] = (struct kwqe *) &ofld_req2;
+
+	ofld_req2.num_additional_wqes = 1;
+	memset(ofld_req3, 0x00, sizeof(ofld_req3[0]));
+	ptbl = (u32 *)((u8 *)ep->qp.rq_pgtbl_virt + ISCSI_RQ_DB_SIZE);
+	ofld_req3[0].qp_first_pte[0].hi = *ptbl++;
+	ofld_req3[0].qp_first_pte[0].lo = *ptbl;
+
+	kwqe_arr[2] = (struct kwqe *) ofld_req3;
+	/* need if we decide to go with multiple KCQE's per conn */
+	num_kwqes += 1;
+
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+}
+
+/**
+ * bnx2i_send_conn_ofld_req - initiates iscsi connection context setup process
+ *
+ * @hba: 		adapter structure pointer
+ * @ep: 		endpoint (transport indentifier) structure
+ *
+ * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+		bnx2i_5771x_send_conn_ofld_req(hba, ep);
+	else
+		bnx2i_570x_send_conn_ofld_req(hba, ep);
+}
+
+
+/**
+ * setup_qp_page_tables - iscsi QP page table setup function
+ * @ep:		endpoint (transport indentifier) structure
+ *
+ * Sets up page tables for SQ/RQ/CQ, 1G/sec (5706/5708/5709) devices requires
+ * 	64-bit address in big endian format. Whereas 10G/sec (57710) requires
+ * 	PT in little endian format
+ */
+static void setup_qp_page_tables(struct bnx2i_endpoint *ep)
+{
+	int num_pages;
+	u32 *ptbl;
+	dma_addr_t page;
+	int cnic_dev_10g;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+		cnic_dev_10g = 1;
+	else
+		cnic_dev_10g = 0;
+
+	/* SQ page table */
+	memset(ep->qp.sq_pgtbl_virt, 0, ep->qp.sq_pgtbl_size);
+	num_pages = ep->qp.sq_mem_size / PAGE_SIZE;
+	page = ep->qp.sq_phys;
+
+	if (cnic_dev_10g)
+		ptbl = (u32 *)((u8 *)ep->qp.sq_pgtbl_virt + ISCSI_SQ_DB_SIZE);
+	else
+		ptbl = (u32 *) ep->qp.sq_pgtbl_virt;
+	while (num_pages--) {
+		if (cnic_dev_10g) {
+			/* PTE is written in little endian format for 57710 */
+			*ptbl = (u32) page;
+			ptbl++;
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			page += PAGE_SIZE;
+		} else {
+			/* PTE is written in big endian format for
+			 * 5706/5708/5709 devices */
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			*ptbl = (u32) page;
+			ptbl++;
+			page += PAGE_SIZE;
+		}
+	}
+
+	/* RQ page table */
+	memset(ep->qp.rq_pgtbl_virt, 0, ep->qp.rq_pgtbl_size);
+	num_pages = ep->qp.rq_mem_size / PAGE_SIZE;
+	page = ep->qp.rq_phys;
+
+	if (cnic_dev_10g)
+		ptbl = (u32 *)((u8 *)ep->qp.rq_pgtbl_virt + ISCSI_RQ_DB_SIZE);
+	else
+		ptbl = (u32 *) ep->qp.rq_pgtbl_virt;
+	while (num_pages--) {
+		if (cnic_dev_10g) {
+			/* PTE is written in little endian format for 57710 */
+			*ptbl = (u32) page;
+			ptbl++;
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			page += PAGE_SIZE;
+		} else {
+			/* PTE is written in big endian format for
+			 * 5706/5708/5709 devices */
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			*ptbl = (u32) page;
+			ptbl++;
+			page += PAGE_SIZE;
+		}
+	}
+
+	/* CQ page table */
+	memset(ep->qp.cq_pgtbl_virt, 0, ep->qp.cq_pgtbl_size);
+	num_pages = ep->qp.cq_mem_size / PAGE_SIZE;
+	page = ep->qp.cq_phys;
+
+	if (cnic_dev_10g)
+		ptbl = (u32 *)((u8 *)ep->qp.cq_pgtbl_virt + ISCSI_CQ_DB_SIZE);
+	else
+		ptbl = (u32 *) ep->qp.cq_pgtbl_virt;
+	while (num_pages--) {
+		if (cnic_dev_10g) {
+			/* PTE is written in little endian format for 57710 */
+			*ptbl = (u32) page;
+			ptbl++;
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			page += PAGE_SIZE;
+		} else {
+			/* PTE is written in big endian format for
+			 * 5706/5708/5709 devices */
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			*ptbl = (u32) page;
+			ptbl++;
+			page += PAGE_SIZE;
+		}
+	}
+}
+
+
+/**
+ * bnx2i_alloc_qp_resc - allocates required resources for QP.
+ * @hba:	adapter structure pointer
+ * @ep:		endpoint (transport indentifier) structure
+ *
+ * Allocate QP (transport layer for iSCSI connection) resources, DMA'able
+ *	memory for SQ/RQ/CQ and page tables. EP structure elements such
+ *	as producer/consumer indexes/pointers, queue sizes and page table
+ *	contents are setup
+ */
+int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+	struct bnx2i_5771x_cq_db *cq_db;
+
+	ep->hba = hba;
+	ep->conn = NULL;
+	ep->ep_cid = ep->ep_iscsi_cid = ep->ep_pg_cid = 0;
+
+	/* Allocate page table memory for SQ which is page aligned */
+	ep->qp.sq_mem_size = hba->max_sqes * BNX2I_SQ_WQE_SIZE;
+	ep->qp.sq_mem_size =
+		(ep->qp.sq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+	ep->qp.sq_pgtbl_size =
+		(ep->qp.sq_mem_size / PAGE_SIZE) * sizeof(void *);
+	ep->qp.sq_pgtbl_size =
+		(ep->qp.sq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+	ep->qp.sq_pgtbl_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_pgtbl_size,
+				   &ep->qp.sq_pgtbl_phys, GFP_KERNEL);
+	if (!ep->qp.sq_pgtbl_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc SQ PT mem (%d)\n",
+				  ep->qp.sq_pgtbl_size);
+		goto mem_alloc_err;
+	}
+
+	/* Allocate memory area for actual SQ element */
+	ep->qp.sq_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size,
+				   &ep->qp.sq_phys, GFP_KERNEL);
+	if (!ep->qp.sq_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc SQ BD memory %d\n",
+				  ep->qp.sq_mem_size);
+		goto mem_alloc_err;
+	}
+
+	memset(ep->qp.sq_virt, 0x00, ep->qp.sq_mem_size);
+	ep->qp.sq_first_qe = ep->qp.sq_virt;
+	ep->qp.sq_prod_qe = ep->qp.sq_first_qe;
+	ep->qp.sq_cons_qe = ep->qp.sq_first_qe;
+	ep->qp.sq_last_qe = &ep->qp.sq_first_qe[hba->max_sqes - 1];
+	ep->qp.sq_prod_idx = 0;
+	ep->qp.sq_cons_idx = 0;
+	ep->qp.sqe_left = hba->max_sqes;
+
+	/* Allocate page table memory for CQ which is page aligned */
+	ep->qp.cq_mem_size = hba->max_cqes * BNX2I_CQE_SIZE;
+	ep->qp.cq_mem_size =
+		(ep->qp.cq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+	ep->qp.cq_pgtbl_size =
+		(ep->qp.cq_mem_size / PAGE_SIZE) * sizeof(void *);
+	ep->qp.cq_pgtbl_size =
+		(ep->qp.cq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+	ep->qp.cq_pgtbl_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_pgtbl_size,
+				   &ep->qp.cq_pgtbl_phys, GFP_KERNEL);
+	if (!ep->qp.cq_pgtbl_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc CQ PT memory %d\n",
+				  ep->qp.cq_pgtbl_size);
+		goto mem_alloc_err;
+	}
+
+	/* Allocate memory area for actual CQ element */
+	ep->qp.cq_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size,
+				   &ep->qp.cq_phys, GFP_KERNEL);
+	if (!ep->qp.cq_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc CQ BD memory %d\n",
+				  ep->qp.cq_mem_size);
+		goto mem_alloc_err;
+	}
+	memset(ep->qp.cq_virt, 0x00, ep->qp.cq_mem_size);
+
+	ep->qp.cq_first_qe = ep->qp.cq_virt;
+	ep->qp.cq_prod_qe = ep->qp.cq_first_qe;
+	ep->qp.cq_cons_qe = ep->qp.cq_first_qe;
+	ep->qp.cq_last_qe = &ep->qp.cq_first_qe[hba->max_cqes - 1];
+	ep->qp.cq_prod_idx = 0;
+	ep->qp.cq_cons_idx = 0;
+	ep->qp.cqe_left = hba->max_cqes;
+	ep->qp.cqe_exp_seq_sn = ISCSI_INITIAL_SN;
+	ep->qp.cqe_size = hba->max_cqes;
+
+	/* Invalidate all EQ CQE index, req only for 57710 */
+	cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt;
+	memset(cq_db->sqn, 0xFF, sizeof(cq_db->sqn[0]) * BNX2X_MAX_CQS);
+
+	/* Allocate page table memory for RQ which is page aligned */
+	ep->qp.rq_mem_size = hba->max_rqes * BNX2I_RQ_WQE_SIZE;
+	ep->qp.rq_mem_size =
+		(ep->qp.rq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+	ep->qp.rq_pgtbl_size =
+		(ep->qp.rq_mem_size / PAGE_SIZE) * sizeof(void *);
+	ep->qp.rq_pgtbl_size =
+		(ep->qp.rq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+	ep->qp.rq_pgtbl_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.rq_pgtbl_size,
+				   &ep->qp.rq_pgtbl_phys, GFP_KERNEL);
+	if (!ep->qp.rq_pgtbl_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc RQ PT mem %d\n",
+				  ep->qp.rq_pgtbl_size);
+		goto mem_alloc_err;
+	}
+
+	/* Allocate memory area for actual RQ element */
+	ep->qp.rq_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.rq_mem_size,
+				   &ep->qp.rq_phys, GFP_KERNEL);
+	if (!ep->qp.rq_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc RQ BD memory %d\n",
+				  ep->qp.rq_mem_size);
+		goto mem_alloc_err;
+	}
+
+	ep->qp.rq_first_qe = ep->qp.rq_virt;
+	ep->qp.rq_prod_qe = ep->qp.rq_first_qe;
+	ep->qp.rq_cons_qe = ep->qp.rq_first_qe;
+	ep->qp.rq_last_qe = &ep->qp.rq_first_qe[hba->max_rqes - 1];
+	ep->qp.rq_prod_idx = 0x8000;
+	ep->qp.rq_cons_idx = 0;
+	ep->qp.rqe_left = hba->max_rqes;
+
+	setup_qp_page_tables(ep);
+
+	return 0;
+
+mem_alloc_err:
+	bnx2i_free_qp_resc(hba, ep);
+	return -ENOMEM;
+}
+
+
+
+/**
+ * bnx2i_free_qp_resc - free memory resources held by QP
+ * @hba:	adapter structure pointer
+ * @ep:	endpoint (transport indentifier) structure
+ *
+ * Free QP resources - SQ/RQ/CQ memory and page tables.
+ */
+void bnx2i_free_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+	if (ep->qp.ctx_base) {
+		iounmap(ep->qp.ctx_base);
+		ep->qp.ctx_base = NULL;
+	}
+	/* Free SQ mem */
+	if (ep->qp.sq_pgtbl_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.sq_pgtbl_size,
+				  ep->qp.sq_pgtbl_virt, ep->qp.sq_pgtbl_phys);
+		ep->qp.sq_pgtbl_virt = NULL;
+		ep->qp.sq_pgtbl_phys = 0;
+	}
+	if (ep->qp.sq_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size,
+				  ep->qp.sq_virt, ep->qp.sq_phys);
+		ep->qp.sq_virt = NULL;
+		ep->qp.sq_phys = 0;
+	}
+
+	/* Free RQ mem */
+	if (ep->qp.rq_pgtbl_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.rq_pgtbl_size,
+				  ep->qp.rq_pgtbl_virt, ep->qp.rq_pgtbl_phys);
+		ep->qp.rq_pgtbl_virt = NULL;
+		ep->qp.rq_pgtbl_phys = 0;
+	}
+	if (ep->qp.rq_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.rq_mem_size,
+				  ep->qp.rq_virt, ep->qp.rq_phys);
+		ep->qp.rq_virt = NULL;
+		ep->qp.rq_phys = 0;
+	}
+
+	/* Free CQ mem */
+	if (ep->qp.cq_pgtbl_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.cq_pgtbl_size,
+				  ep->qp.cq_pgtbl_virt, ep->qp.cq_pgtbl_phys);
+		ep->qp.cq_pgtbl_virt = NULL;
+		ep->qp.cq_pgtbl_phys = 0;
+	}
+	if (ep->qp.cq_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size,
+				  ep->qp.cq_virt, ep->qp.cq_phys);
+		ep->qp.cq_virt = NULL;
+		ep->qp.cq_phys = 0;
+	}
+}
+
+
+/**
+ * bnx2i_send_fw_iscsi_init_msg - initiates initial handshake with iscsi f/w
+ * @hba:	adapter structure pointer
+ *
+ * Send down iscsi_init KWQEs which initiates the initial handshake with the f/w
+ * 	This results in iSCSi support validation and on-chip context manager
+ * 	initialization.  Firmware completes this handshake with a CQE carrying
+ * 	the result of iscsi support validation. Parameter carried by
+ * 	iscsi init request determines the number of offloaded connection and
+ * 	tolerance level for iscsi protocol violation this hba/chip can support
+ */
+int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba)
+{
+	struct kwqe *kwqe_arr[3];
+	struct iscsi_kwqe_init1 iscsi_init;
+	struct iscsi_kwqe_init2 iscsi_init2;
+	int rc = 0;
+	u64 mask64;
+
+	bnx2i_adjust_qp_size(hba);
+
+	iscsi_init.flags =
+		ISCSI_PAGE_SIZE_4K << ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT;
+	if (en_tcp_dack)
+		iscsi_init.flags |= ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE;
+	iscsi_init.reserved0 = 0;
+	iscsi_init.num_cqs = 1;
+	iscsi_init.hdr.op_code = ISCSI_KWQE_OPCODE_INIT1;
+	iscsi_init.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	iscsi_init.dummy_buffer_addr_lo = (u32) hba->dummy_buf_dma;
+	iscsi_init.dummy_buffer_addr_hi =
+		(u32) ((u64) hba->dummy_buf_dma >> 32);
+
+	hba->ctx_ccell_tasks =
+			((hba->num_ccell & 0xFFFF) | (hba->max_sqes << 16));
+	iscsi_init.num_ccells_per_conn = hba->num_ccell;
+	iscsi_init.num_tasks_per_conn = hba->max_sqes;
+	iscsi_init.sq_wqes_per_page = PAGE_SIZE / BNX2I_SQ_WQE_SIZE;
+	iscsi_init.sq_num_wqes = hba->max_sqes;
+	iscsi_init.cq_log_wqes_per_page =
+		(u8) bnx2i_power_of2(PAGE_SIZE / BNX2I_CQE_SIZE);
+	iscsi_init.cq_num_wqes = hba->max_cqes;
+	iscsi_init.cq_num_pages = (hba->max_cqes * BNX2I_CQE_SIZE +
+				   (PAGE_SIZE - 1)) / PAGE_SIZE;
+	iscsi_init.sq_num_pages = (hba->max_sqes * BNX2I_SQ_WQE_SIZE +
+				   (PAGE_SIZE - 1)) / PAGE_SIZE;
+	iscsi_init.rq_buffer_size = BNX2I_RQ_WQE_SIZE;
+	iscsi_init.rq_num_wqes = hba->max_rqes;
+
+
+	iscsi_init2.hdr.op_code = ISCSI_KWQE_OPCODE_INIT2;
+	iscsi_init2.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+	iscsi_init2.max_cq_sqn = hba->max_cqes * 2 + 1;
+	mask64 = 0x0ULL;
+	mask64 |= (
+		/* CISCO MDS */
+		(1UL <<
+		  ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV) |
+		/* HP MSA1510i */
+		(1UL <<
+		  ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN) |
+		/* EMC */
+		(1ULL << ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN));
+	if (error_mask1)
+		iscsi_init2.error_bit_map[0] = error_mask1;
+	else
+		iscsi_init2.error_bit_map[0] = (u32) mask64;
+
+	if (error_mask2)
+		iscsi_init2.error_bit_map[1] = error_mask2;
+	else
+		iscsi_init2.error_bit_map[1] = (u32) (mask64 >> 32);
+
+	iscsi_error_mask = mask64;
+
+	kwqe_arr[0] = (struct kwqe *) &iscsi_init;
+	kwqe_arr[1] = (struct kwqe *) &iscsi_init2;
+
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 2);
+	return rc;
+}
+
+
+/**
+ * bnx2i_process_scsi_cmd_resp - this function handles scsi cmd completion.
+ * @conn:	iscsi connection
+ * @cqe:	pointer to newly DMA'ed CQE entry for processing
+ *
+ * process SCSI CMD Response CQE & complete the request to SCSI-ML
+ */
+static int bnx2i_process_scsi_cmd_resp(struct iscsi_session *session,
+				       struct bnx2i_conn *bnx2i_conn,
+				       struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct bnx2i_cmd_response *resp_cqe;
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct iscsi_task *task;
+	struct iscsi_cmd_rsp *hdr;
+	u32 datalen = 0;
+
+	resp_cqe = (struct bnx2i_cmd_response *)cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 resp_cqe->itt & ISCSI_CMD_RESPONSE_INDEX);
+	if (!task)
+		goto fail;
+
+	bnx2i_cmd = task->dd_data;
+
+	if (bnx2i_cmd->req.op_attr & ISCSI_CMD_REQUEST_READ) {
+		conn->datain_pdus_cnt +=
+			resp_cqe->task_stat.read_stat.num_data_outs;
+		conn->rxdata_octets +=
+			bnx2i_cmd->req.total_data_transfer_length;
+	} else {
+		conn->dataout_pdus_cnt +=
+			resp_cqe->task_stat.read_stat.num_data_outs;
+		conn->r2t_pdus_cnt +=
+			resp_cqe->task_stat.read_stat.num_r2ts;
+		conn->txdata_octets +=
+			bnx2i_cmd->req.total_data_transfer_length;
+	}
+	bnx2i_iscsi_unmap_sg_list(bnx2i_cmd);
+
+	hdr = (struct iscsi_cmd_rsp *)task->hdr;
+	resp_cqe = (struct bnx2i_cmd_response *)cqe;
+	hdr->opcode = resp_cqe->op_code;
+	hdr->max_cmdsn = cpu_to_be32(resp_cqe->max_cmd_sn);
+	hdr->exp_cmdsn = cpu_to_be32(resp_cqe->exp_cmd_sn);
+	hdr->response = resp_cqe->response;
+	hdr->cmd_status = resp_cqe->status;
+	hdr->flags = resp_cqe->response_flags;
+	hdr->residual_count = cpu_to_be32(resp_cqe->residual_count);
+
+	if (resp_cqe->op_code == ISCSI_OP_SCSI_DATA_IN)
+		goto done;
+
+	if (resp_cqe->status == SAM_STAT_CHECK_CONDITION) {
+		datalen = resp_cqe->data_length;
+		if (datalen < 2)
+			goto done;
+
+		if (datalen > BNX2I_RQ_WQE_SIZE) {
+			iscsi_conn_printk(KERN_ERR, conn,
+					  "sense data len %d > RQ sz\n",
+					  datalen);
+			datalen = BNX2I_RQ_WQE_SIZE;
+		} else if (datalen > ISCSI_DEF_MAX_RECV_SEG_LEN) {
+			iscsi_conn_printk(KERN_ERR, conn,
+					  "sense data len %d > conn data\n",
+					  datalen);
+			datalen = ISCSI_DEF_MAX_RECV_SEG_LEN;
+		}
+
+		bnx2i_get_rq_buf(bnx2i_cmd->conn, conn->data, datalen);
+		bnx2i_put_rq_buf(bnx2i_cmd->conn, 1);
+	}
+
+done:
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr,
+			     conn->data, datalen);
+fail:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+
+/**
+ * bnx2i_process_login_resp - this function handles iscsi login response
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process Login Response CQE & complete it to open-iscsi user daemon
+ */
+static int bnx2i_process_login_resp(struct iscsi_session *session,
+				    struct bnx2i_conn *bnx2i_conn,
+				    struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_login_response *login;
+	struct iscsi_login_rsp *resp_hdr;
+	int pld_len;
+	int pad_len;
+
+	login = (struct bnx2i_login_response *) cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 login->itt & ISCSI_LOGIN_RESPONSE_INDEX);
+	if (!task)
+		goto done;
+
+	resp_hdr = (struct iscsi_login_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = login->op_code;
+	resp_hdr->flags = login->response_flags;
+	resp_hdr->max_version = login->version_max;
+	resp_hdr->active_version = login->version_active;;
+	resp_hdr->hlength = 0;
+
+	hton24(resp_hdr->dlength, login->data_length);
+	memcpy(resp_hdr->isid, &login->isid_lo, 6);
+	resp_hdr->tsih = cpu_to_be16(login->tsih);
+	resp_hdr->itt = task->hdr->itt;
+	resp_hdr->statsn = cpu_to_be32(login->stat_sn);
+	resp_hdr->exp_cmdsn = cpu_to_be32(login->exp_cmd_sn);
+	resp_hdr->max_cmdsn = cpu_to_be32(login->max_cmd_sn);
+	resp_hdr->status_class = login->status_class;
+	resp_hdr->status_detail = login->status_detail;
+	pld_len = login->data_length;
+	bnx2i_conn->gen_pdu.resp_wr_ptr =
+					bnx2i_conn->gen_pdu.resp_buf + pld_len;
+
+	pad_len = 0;
+	if (pld_len & 0x3)
+		pad_len = 4 - (pld_len % 4);
+
+	if (pad_len) {
+		int i = 0;
+		for (i = 0; i < pad_len; i++) {
+			bnx2i_conn->gen_pdu.resp_wr_ptr[0] = 0;
+			bnx2i_conn->gen_pdu.resp_wr_ptr++;
+		}
+	}
+
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr,
+		bnx2i_conn->gen_pdu.resp_buf,
+		bnx2i_conn->gen_pdu.resp_wr_ptr - bnx2i_conn->gen_pdu.resp_buf);
+done:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+/**
+ * bnx2i_process_tmf_resp - this function handles iscsi TMF response
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI TMF Response CQE and wake up the driver eh thread.
+ */
+static int bnx2i_process_tmf_resp(struct iscsi_session *session,
+				  struct bnx2i_conn *bnx2i_conn,
+				  struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_tmf_response *tmf_cqe;
+	struct iscsi_tm_rsp *resp_hdr;
+
+	tmf_cqe = (struct bnx2i_tmf_response *)cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 tmf_cqe->itt & ISCSI_TMF_RESPONSE_INDEX);
+	if (!task)
+		goto done;
+
+	resp_hdr = (struct iscsi_tm_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = tmf_cqe->op_code;
+	resp_hdr->max_cmdsn = cpu_to_be32(tmf_cqe->max_cmd_sn);
+	resp_hdr->exp_cmdsn = cpu_to_be32(tmf_cqe->exp_cmd_sn);
+	resp_hdr->itt = task->hdr->itt;
+	resp_hdr->response = tmf_cqe->response;
+
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
+done:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+/**
+ * bnx2i_process_logout_resp - this function handles iscsi logout response
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI Logout Response CQE & make function call to
+ * notify the user daemon.
+ */
+static int bnx2i_process_logout_resp(struct iscsi_session *session,
+				     struct bnx2i_conn *bnx2i_conn,
+				     struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_logout_response *logout;
+	struct iscsi_logout_rsp *resp_hdr;
+
+	logout = (struct bnx2i_logout_response *) cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 logout->itt & ISCSI_LOGOUT_RESPONSE_INDEX);
+	if (!task)
+		goto done;
+
+	resp_hdr = (struct iscsi_logout_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = logout->op_code;
+	resp_hdr->flags = logout->response;
+	resp_hdr->hlength = 0;
+
+	resp_hdr->itt = task->hdr->itt;
+	resp_hdr->statsn = task->hdr->exp_statsn;
+	resp_hdr->exp_cmdsn = cpu_to_be32(logout->exp_cmd_sn);
+	resp_hdr->max_cmdsn = cpu_to_be32(logout->max_cmd_sn);
+
+	resp_hdr->t2wait = cpu_to_be32(logout->time_to_wait);
+	resp_hdr->t2retain = cpu_to_be32(logout->time_to_retain);
+
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
+done:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+/**
+ * bnx2i_process_nopin_local_cmpl - this function handles iscsi nopin CQE
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI NOPIN local completion CQE, frees IIT and command structures
+ */
+static void bnx2i_process_nopin_local_cmpl(struct iscsi_session *session,
+					   struct bnx2i_conn *bnx2i_conn,
+					   struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct bnx2i_nop_in_msg *nop_in;
+	struct iscsi_task *task;
+
+	nop_in = (struct bnx2i_nop_in_msg *)cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 nop_in->itt & ISCSI_NOP_IN_MSG_INDEX);
+	if (task)
+		iscsi_put_task(task);
+	spin_unlock(&session->lock);
+}
+
+/**
+ * bnx2i_unsol_pdu_adjust_rq - makes adjustments to RQ after unsol pdu is recvd
+ * @conn:	iscsi connection
+ *
+ * Firmware advances RQ producer index for every unsolicited PDU even if
+ *	payload data length is '0'. This function makes corresponding
+ *	adjustments on the driver side to match this f/w behavior
+ */
+static void bnx2i_unsol_pdu_adjust_rq(struct bnx2i_conn *bnx2i_conn)
+{
+	char dummy_rq_data[2];
+	bnx2i_get_rq_buf(bnx2i_conn, dummy_rq_data, 1);
+	bnx2i_put_rq_buf(bnx2i_conn, 1);
+}
+
+
+/**
+ * bnx2i_process_nopin_mesg - this function handles iscsi nopin CQE
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI target's proactive iSCSI NOPIN request
+ */
+static int bnx2i_process_nopin_mesg(struct iscsi_session *session,
+				     struct bnx2i_conn *bnx2i_conn,
+				     struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_nop_in_msg *nop_in;
+	struct iscsi_nopin *hdr;
+	u32 itt;
+	int tgt_async_nop = 0;
+
+	nop_in = (struct bnx2i_nop_in_msg *)cqe;
+	itt = nop_in->itt & ISCSI_NOP_IN_MSG_INDEX;
+
+	spin_lock(&session->lock);
+	hdr = (struct iscsi_nopin *)&bnx2i_conn->gen_pdu.resp_hdr;
+	memset(hdr, 0, sizeof(struct iscsi_hdr));
+	hdr->opcode = nop_in->op_code;
+	hdr->max_cmdsn = cpu_to_be32(nop_in->max_cmd_sn);
+	hdr->exp_cmdsn = cpu_to_be32(nop_in->exp_cmd_sn);
+	hdr->ttt = cpu_to_be32(nop_in->ttt);
+
+	if (itt == (u16) RESERVED_ITT) {
+		bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+		hdr->itt = RESERVED_ITT;
+		tgt_async_nop = 1;
+		goto done;
+	}
+
+	/* this is a response to one of our nop-outs */
+	task = iscsi_itt_to_task(conn, itt);
+	if (task) {
+		hdr->flags = ISCSI_FLAG_CMD_FINAL;
+		hdr->itt = task->hdr->itt;
+		hdr->ttt = cpu_to_be32(nop_in->ttt);
+		memcpy(hdr->lun, nop_in->lun, 8);
+	}
+done:
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
+	spin_unlock(&session->lock);
+
+	return tgt_async_nop;
+}
+
+
+/**
+ * bnx2i_process_async_mesg - this function handles iscsi async message
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI ASYNC Message
+ */
+static void bnx2i_process_async_mesg(struct iscsi_session *session,
+				     struct bnx2i_conn *bnx2i_conn,
+				     struct cqe *cqe)
+{
+	struct bnx2i_async_msg *async_cqe;
+	struct iscsi_async *resp_hdr;
+	u8 async_event;
+
+	bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+
+	async_cqe = (struct bnx2i_async_msg *)cqe;
+	async_event = async_cqe->async_event;
+
+	if (async_event == ISCSI_ASYNC_MSG_SCSI_EVENT) {
+		iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+				  "async: scsi events not supported\n");
+		return;
+	}
+
+	spin_lock(&session->lock);
+	resp_hdr = (struct iscsi_async *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = async_cqe->op_code;
+	resp_hdr->flags = 0x80;
+
+	memcpy(resp_hdr->lun, async_cqe->lun, 8);
+	resp_hdr->exp_cmdsn = cpu_to_be32(async_cqe->exp_cmd_sn);
+	resp_hdr->max_cmdsn = cpu_to_be32(async_cqe->max_cmd_sn);
+
+	resp_hdr->async_event = async_cqe->async_event;
+	resp_hdr->async_vcode = async_cqe->async_vcode;
+
+	resp_hdr->param1 = cpu_to_be16(async_cqe->param1);
+	resp_hdr->param2 = cpu_to_be16(async_cqe->param2);
+	resp_hdr->param3 = cpu_to_be16(async_cqe->param3);
+
+	__iscsi_complete_pdu(bnx2i_conn->cls_conn->dd_data,
+			     (struct iscsi_hdr *)resp_hdr, NULL, 0);
+	spin_unlock(&session->lock);
+}
+
+
+/**
+ * bnx2i_process_reject_mesg - process iscsi reject pdu
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI REJECT message
+ */
+static void bnx2i_process_reject_mesg(struct iscsi_session *session,
+				      struct bnx2i_conn *bnx2i_conn,
+				      struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct bnx2i_reject_msg *reject;
+	struct iscsi_reject *hdr;
+
+	reject = (struct bnx2i_reject_msg *) cqe;
+	if (reject->data_length) {
+		bnx2i_get_rq_buf(bnx2i_conn, conn->data, reject->data_length);
+		bnx2i_put_rq_buf(bnx2i_conn, 1);
+	} else
+		bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+
+	spin_lock(&session->lock);
+	hdr = (struct iscsi_reject *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(hdr, 0, sizeof(struct iscsi_hdr));
+	hdr->opcode = reject->op_code;
+	hdr->reason = reject->reason;
+	hton24(hdr->dlength, reject->data_length);
+	hdr->max_cmdsn = cpu_to_be32(reject->max_cmd_sn);
+	hdr->exp_cmdsn = cpu_to_be32(reject->exp_cmd_sn);
+	hdr->ffffffff = cpu_to_be32(RESERVED_ITT);
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, conn->data,
+			     reject->data_length);
+	spin_unlock(&session->lock);
+}
+
+/**
+ * bnx2i_process_cmd_cleanup_resp - process scsi command clean-up completion
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process command cleanup response CQE during conn shutdown or error recovery
+ */
+static void bnx2i_process_cmd_cleanup_resp(struct iscsi_session *session,
+					   struct bnx2i_conn *bnx2i_conn,
+					   struct cqe *cqe)
+{
+	struct bnx2i_cleanup_response *cmd_clean_rsp;
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+
+	cmd_clean_rsp = (struct bnx2i_cleanup_response *)cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+			cmd_clean_rsp->itt & ISCSI_CLEANUP_RESPONSE_INDEX);
+	if (!task)
+		printk(KERN_ALERT "bnx2i: cmd clean ITT %x not active\n",
+			cmd_clean_rsp->itt & ISCSI_CLEANUP_RESPONSE_INDEX);
+	spin_unlock(&session->lock);
+	complete(&bnx2i_conn->cmd_cleanup_cmpl);
+}
+
+
+
+/**
+ * bnx2i_process_new_cqes - process newly DMA'ed CQE's
+ * @bnx2i_conn:		iscsi connection
+ *
+ * this function is called by generic KCQ handler to process all pending CQE's
+ */
+static void bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_session *session = conn->session;
+	struct qp_info *qp = &bnx2i_conn->ep->qp;
+	struct bnx2i_nop_in_msg *nopin;
+	int tgt_async_msg;
+
+	while (1) {
+		nopin = (struct bnx2i_nop_in_msg *) qp->cq_cons_qe;
+		if (nopin->cq_req_sn != qp->cqe_exp_seq_sn)
+			break;
+
+		if (unlikely(test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx)))
+			break;
+
+		tgt_async_msg = 0;
+
+		switch (nopin->op_code) {
+		case ISCSI_OP_SCSI_CMD_RSP:
+		case ISCSI_OP_SCSI_DATA_IN:
+			bnx2i_process_scsi_cmd_resp(session, bnx2i_conn,
+						    qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_LOGIN_RSP:
+			bnx2i_process_login_resp(session, bnx2i_conn,
+						 qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_SCSI_TMFUNC_RSP:
+			bnx2i_process_tmf_resp(session, bnx2i_conn,
+					       qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_LOGOUT_RSP:
+			bnx2i_process_logout_resp(session, bnx2i_conn,
+						  qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_NOOP_IN:
+			if (bnx2i_process_nopin_mesg(session, bnx2i_conn,
+						     qp->cq_cons_qe))
+				tgt_async_msg = 1;
+			break;
+		case ISCSI_OPCODE_NOPOUT_LOCAL_COMPLETION:
+			bnx2i_process_nopin_local_cmpl(session, bnx2i_conn,
+						       qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_ASYNC_EVENT:
+			bnx2i_process_async_mesg(session, bnx2i_conn,
+						 qp->cq_cons_qe);
+			tgt_async_msg = 1;
+			break;
+		case ISCSI_OP_REJECT:
+			bnx2i_process_reject_mesg(session, bnx2i_conn,
+						  qp->cq_cons_qe);
+			break;
+		case ISCSI_OPCODE_CLEANUP_RESPONSE:
+			bnx2i_process_cmd_cleanup_resp(session, bnx2i_conn,
+						       qp->cq_cons_qe);
+			break;
+		default:
+			printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
+					  nopin->op_code);
+		}
+
+		if (!tgt_async_msg)
+			bnx2i_conn->ep->num_active_cmds--;
+
+		/* clear out in production version only, till beta keep opcode
+		 * field intact, will be helpful in debugging (context dump)
+		 * nopin->op_code = 0;
+		 */
+		qp->cqe_exp_seq_sn++;
+		if (qp->cqe_exp_seq_sn == (qp->cqe_size * 2 + 1))
+			qp->cqe_exp_seq_sn = ISCSI_INITIAL_SN;
+
+		if (qp->cq_cons_qe == qp->cq_last_qe) {
+			qp->cq_cons_qe = qp->cq_first_qe;
+			qp->cq_cons_idx = 0;
+		} else {
+			qp->cq_cons_qe++;
+			qp->cq_cons_idx++;
+		}
+	}
+	bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE);
+}
+
+/**
+ * bnx2i_fastpath_notification - process global event queue (KCQ)
+ * @hba:		adapter structure pointer
+ * @new_cqe_kcqe:	pointer to newly DMA'ed KCQE entry
+ *
+ * Fast path event notification handler, KCQ entry carries context id
+ *	of the connection that has 1 or more pending CQ entries
+ */
+static void bnx2i_fastpath_notification(struct bnx2i_hba *hba,
+					struct iscsi_kcqe *new_cqe_kcqe)
+{
+	struct bnx2i_conn *conn;
+	u32 iscsi_cid;
+
+	iscsi_cid = new_cqe_kcqe->iscsi_conn_id;
+	conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+	if (!conn) {
+		printk(KERN_ALERT "cid #%x not valid\n", iscsi_cid);
+		return;
+	}
+	if (!conn->ep) {
+		printk(KERN_ALERT "cid #%x - ep not bound\n", iscsi_cid);
+		return;
+	}
+
+	bnx2i_process_new_cqes(conn);
+}
+
+
+/**
+ * bnx2i_process_update_conn_cmpl - process iscsi conn update completion KCQE
+ * @hba:		adapter structure pointer
+ * @update_kcqe:	kcqe pointer
+ *
+ * CONN_UPDATE completion handler, this completes iSCSI connection FFP migration
+ */
+static void bnx2i_process_update_conn_cmpl(struct bnx2i_hba *hba,
+					   struct iscsi_kcqe *update_kcqe)
+{
+	struct bnx2i_conn *conn;
+	u32 iscsi_cid;
+
+	iscsi_cid = update_kcqe->iscsi_conn_id;
+	conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+	if (!conn) {
+		printk(KERN_ALERT "conn_update: cid %x not valid\n", iscsi_cid);
+		return;
+	}
+	if (!conn->ep) {
+		printk(KERN_ALERT "cid %x does not have ep bound\n", iscsi_cid);
+		return;
+	}
+
+	if (update_kcqe->completion_status) {
+		printk(KERN_ALERT "request failed cid %x\n", iscsi_cid);
+		conn->ep->state = EP_STATE_ULP_UPDATE_FAILED;
+	} else
+		conn->ep->state = EP_STATE_ULP_UPDATE_COMPL;
+
+	wake_up_interruptible(&conn->ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_recovery_que_add_conn - add connection to recovery queue
+ * @hba:		adapter structure pointer
+ * @bnx2i_conn:		iscsi connection
+ *
+ * Add connection to recovery queue and schedule adapter eh worker
+ */
+static void bnx2i_recovery_que_add_conn(struct bnx2i_hba *hba,
+					struct bnx2i_conn *bnx2i_conn)
+{
+	iscsi_conn_failure(bnx2i_conn->cls_conn->dd_data,
+			   ISCSI_ERR_CONN_FAILED);
+}
+
+
+/**
+ * bnx2i_process_tcp_error - process error notification on a given connection
+ *
+ * @hba: 		adapter structure pointer
+ * @tcp_err: 		tcp error kcqe pointer
+ *
+ * handles tcp level error notifications from FW.
+ */
+static void bnx2i_process_tcp_error(struct bnx2i_hba *hba,
+				    struct iscsi_kcqe *tcp_err)
+{
+	struct bnx2i_conn *bnx2i_conn;
+	u32 iscsi_cid;
+
+	iscsi_cid = tcp_err->iscsi_conn_id;
+	bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+	if (!bnx2i_conn) {
+		printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
+		return;
+	}
+
+	printk(KERN_ALERT "bnx2i - cid 0x%x had TCP errors, error code 0x%x\n",
+			  iscsi_cid, tcp_err->completion_status);
+	bnx2i_recovery_que_add_conn(bnx2i_conn->hba, bnx2i_conn);
+}
+
+
+/**
+ * bnx2i_process_iscsi_error - process error notification on a given connection
+ * @hba:		adapter structure pointer
+ * @iscsi_err:		iscsi error kcqe pointer
+ *
+ * handles iscsi error notifications from the FW. Firmware based in initial
+ *	handshake classifies iscsi protocol / TCP rfc violation into either
+ *	warning or error indications. If indication is of "Error" type, driver
+ *	will initiate session recovery for that connection/session. For
+ *	"Warning" type indication, driver will put out a system log message
+ *	(there will be only one message for each type for the life of the
+ *	session, this is to avoid un-necessarily overloading the system)
+ */
+static void bnx2i_process_iscsi_error(struct bnx2i_hba *hba,
+				      struct iscsi_kcqe *iscsi_err)
+{
+	struct bnx2i_conn *bnx2i_conn;
+	u32 iscsi_cid;
+	char warn_notice[] = "iscsi_warning";
+	char error_notice[] = "iscsi_error";
+	char additional_notice[64];
+	char *message;
+	int need_recovery;
+	u64 err_mask64;
+
+	iscsi_cid = iscsi_err->iscsi_conn_id;
+	bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+	if (!bnx2i_conn) {
+		printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
+		return;
+	}
+
+	err_mask64 = (0x1ULL << iscsi_err->completion_status);
+
+	if (err_mask64 & iscsi_error_mask) {
+		need_recovery = 0;
+		message = warn_notice;
+	} else {
+		need_recovery = 1;
+		message = error_notice;
+	}
+
+	switch (iscsi_err->completion_status) {
+	case ISCSI_KCQE_COMPLETION_STATUS_HDR_DIG_ERR:
+		strcpy(additional_notice, "hdr digest err");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_DATA_DIG_ERR:
+		strcpy(additional_notice, "data digest err");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_OPCODE:
+		strcpy(additional_notice, "wrong opcode rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_AHS_LEN:
+		strcpy(additional_notice, "AHS len > 0 rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ITT:
+		strcpy(additional_notice, "invalid ITT rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_STATSN:
+		strcpy(additional_notice, "wrong StatSN rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN:
+		strcpy(additional_notice, "wrong DataSN rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T:
+		strcpy(additional_notice, "pend R2T violation");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_0:
+		strcpy(additional_notice, "ERL0, UO");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_1:
+		strcpy(additional_notice, "ERL0, U1");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_2:
+		strcpy(additional_notice, "ERL0, U2");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_3:
+		strcpy(additional_notice, "ERL0, U3");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_4:
+		strcpy(additional_notice, "ERL0, U4");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_5:
+		strcpy(additional_notice, "ERL0, U5");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_6:
+		strcpy(additional_notice, "ERL0, U6");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_RCV_LEN:
+		strcpy(additional_notice, "invalid resi len");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_RCV_PDU_LEN:
+		strcpy(additional_notice, "MRDSL violation");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_F_BIT_ZERO:
+		strcpy(additional_notice, "F-bit not set");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV:
+		strcpy(additional_notice, "invalid TTT");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATASN:
+		strcpy(additional_notice, "invalid DataSN");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_BURST_LEN:
+		strcpy(additional_notice, "burst len violation");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_BUFFER_OFF:
+		strcpy(additional_notice, "buf offset violation");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN:
+		strcpy(additional_notice, "invalid LUN field");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_R2TSN:
+		strcpy(additional_notice, "invalid R2TSN field");
+		break;
+#define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0 	\
+	ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0
+	case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0:
+		strcpy(additional_notice, "invalid cmd len1");
+		break;
+#define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1 	\
+	ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1
+	case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1:
+		strcpy(additional_notice, "invalid cmd len2");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_EXCEED:
+		strcpy(additional_notice,
+		       "pend r2t exceeds MaxOutstandingR2T value");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_IS_RSRV:
+		strcpy(additional_notice, "TTT is rsvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_BURST_LEN:
+		strcpy(additional_notice, "MBL violation");
+		break;
+#define BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO 	\
+	ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_NOT_ZERO
+	case BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO:
+		strcpy(additional_notice, "data seg len != 0");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REJECT_PDU_LEN:
+		strcpy(additional_notice, "reject pdu len error");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ASYNC_PDU_LEN:
+		strcpy(additional_notice, "async pdu len error");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_NOPIN_PDU_LEN:
+		strcpy(additional_notice, "nopin pdu len error");
+		break;
+#define BNX2_ERR_PEND_R2T_IN_CLEANUP			\
+	ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_IN_CLEANUP
+	case BNX2_ERR_PEND_R2T_IN_CLEANUP:
+		strcpy(additional_notice, "pend r2t in cleanup");
+		break;
+
+	case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_FRAGMENT:
+		strcpy(additional_notice, "IP fragments rcvd");
+		break;
+	case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_OPTIONS:
+		strcpy(additional_notice, "IP options error");
+		break;
+	case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_URGENT_FLAG:
+		strcpy(additional_notice, "urgent flag error");
+		break;
+	default:
+		printk(KERN_ALERT "iscsi_err - unknown err %x\n",
+				  iscsi_err->completion_status);
+	}
+
+	if (need_recovery) {
+		iscsi_conn_printk(KERN_ALERT,
+				  bnx2i_conn->cls_conn->dd_data,
+				  "bnx2i: %s - %s\n",
+				  message, additional_notice);
+
+		iscsi_conn_printk(KERN_ALERT,
+				  bnx2i_conn->cls_conn->dd_data,
+				  "conn_err - hostno %d conn %p, "
+				  "iscsi_cid %x cid %x\n",
+				  bnx2i_conn->hba->shost->host_no,
+				  bnx2i_conn, bnx2i_conn->ep->ep_iscsi_cid,
+				  bnx2i_conn->ep->ep_cid);
+		bnx2i_recovery_que_add_conn(bnx2i_conn->hba, bnx2i_conn);
+	} else
+		if (!test_and_set_bit(iscsi_err->completion_status,
+				      (void *) &bnx2i_conn->violation_notified))
+			iscsi_conn_printk(KERN_ALERT,
+					  bnx2i_conn->cls_conn->dd_data,
+					  "bnx2i: %s - %s\n",
+					  message, additional_notice);
+}
+
+
+/**
+ * bnx2i_process_conn_destroy_cmpl - process iscsi conn destroy completion
+ * @hba:		adapter structure pointer
+ * @conn_destroy:	conn destroy kcqe pointer
+ *
+ * handles connection destroy completion request.
+ */
+static void bnx2i_process_conn_destroy_cmpl(struct bnx2i_hba *hba,
+					    struct iscsi_kcqe *conn_destroy)
+{
+	struct bnx2i_endpoint *ep;
+
+	ep = bnx2i_find_ep_in_destroy_list(hba, conn_destroy->iscsi_conn_id);
+	if (!ep) {
+		printk(KERN_ALERT "bnx2i_conn_destroy_cmpl: no pending "
+				  "offload request, unexpected complection\n");
+		return;
+	}
+
+	if (hba != ep->hba) {
+		printk(KERN_ALERT "conn destroy- error hba mis-match\n");
+		return;
+	}
+
+	if (conn_destroy->completion_status) {
+		printk(KERN_ALERT "conn_destroy_cmpl: op failed\n");
+		ep->state = EP_STATE_CLEANUP_FAILED;
+	} else
+		ep->state = EP_STATE_CLEANUP_CMPL;
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_process_ofld_cmpl - process initial iscsi conn offload completion
+ * @hba:		adapter structure pointer
+ * @ofld_kcqe:		conn offload kcqe pointer
+ *
+ * handles initial connection offload completion, ep_connect() thread is
+ *	woken-up to continue with LLP connect process
+ */
+static void bnx2i_process_ofld_cmpl(struct bnx2i_hba *hba,
+				    struct iscsi_kcqe *ofld_kcqe)
+{
+	u32 cid_addr;
+	struct bnx2i_endpoint *ep;
+	u32 cid_num;
+
+	ep = bnx2i_find_ep_in_ofld_list(hba, ofld_kcqe->iscsi_conn_id);
+	if (!ep) {
+		printk(KERN_ALERT "ofld_cmpl: no pend offload request\n");
+		return;
+	}
+
+	if (hba != ep->hba) {
+		printk(KERN_ALERT "ofld_cmpl: error hba mis-match\n");
+		return;
+	}
+
+	if (ofld_kcqe->completion_status) {
+		if (ofld_kcqe->completion_status ==
+		    ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE)
+			printk(KERN_ALERT "bnx2i: unable to allocate"
+					  " iSCSI context resources\n");
+		ep->state = EP_STATE_OFLD_FAILED;
+	} else {
+		ep->state = EP_STATE_OFLD_COMPL;
+		cid_addr = ofld_kcqe->iscsi_conn_context_id;
+		cid_num = bnx2i_get_cid_num(ep);
+		ep->ep_cid = cid_addr;
+		ep->qp.ctx_base = NULL;
+	}
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+/**
+ * bnx2i_indicate_kcqe - process iscsi conn update completion KCQE
+ * @hba:		adapter structure pointer
+ * @update_kcqe:	kcqe pointer
+ *
+ * Generic KCQ event handler/dispatcher
+ */
+static void bnx2i_indicate_kcqe(void *context, struct kcqe *kcqe[],
+				u32 num_cqe)
+{
+	struct bnx2i_hba *hba = context;
+	int i = 0;
+	struct iscsi_kcqe *ikcqe = NULL;
+
+	while (i < num_cqe) {
+		ikcqe = (struct iscsi_kcqe *) kcqe[i++];
+
+		if (ikcqe->op_code ==
+		    ISCSI_KCQE_OPCODE_CQ_EVENT_NOTIFICATION)
+			bnx2i_fastpath_notification(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_OFFLOAD_CONN)
+			bnx2i_process_ofld_cmpl(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_UPDATE_CONN)
+			bnx2i_process_update_conn_cmpl(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_INIT) {
+			if (ikcqe->completion_status !=
+			    ISCSI_KCQE_COMPLETION_STATUS_SUCCESS)
+				bnx2i_iscsi_license_error(hba, ikcqe->\
+							  completion_status);
+			else {
+				set_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+				bnx2i_get_link_state(hba);
+				printk(KERN_INFO "bnx2i [%.2x:%.2x.%.2x]: "
+						 "ISCSI_INIT passed\n",
+						 (u8)hba->pcidev->bus->number,
+						 hba->pci_devno,
+						 (u8)hba->pci_func);
+
+
+			}
+		} else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_DESTROY_CONN)
+			bnx2i_process_conn_destroy_cmpl(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_ISCSI_ERROR)
+			bnx2i_process_iscsi_error(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_TCP_ERROR)
+			bnx2i_process_tcp_error(hba, ikcqe);
+		else
+			printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
+					  ikcqe->op_code);
+	}
+}
+
+
+/**
+ * bnx2i_indicate_netevent - Generic netdev event handler
+ * @context:	adapter structure pointer
+ * @event:	event type
+ *
+ * Handles four netdev events, NETDEV_UP, NETDEV_DOWN,
+ *	NETDEV_GOING_DOWN and NETDEV_CHANGE
+ */
+static void bnx2i_indicate_netevent(void *context, unsigned long event)
+{
+	struct bnx2i_hba *hba = context;
+
+	switch (event) {
+	case NETDEV_UP:
+		if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
+			bnx2i_send_fw_iscsi_init_msg(hba);
+		break;
+	case NETDEV_DOWN:
+		clear_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
+		clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+		break;
+	case NETDEV_GOING_DOWN:
+		set_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
+		iscsi_host_for_each_session(hba->shost,
+					    bnx2i_drop_session);
+		break;
+	case NETDEV_CHANGE:
+		bnx2i_get_link_state(hba);
+		break;
+	default:
+		;
+	}
+}
+
+
+/**
+ * bnx2i_cm_connect_cmpl - process iscsi conn establishment completion
+ * @cm_sk: 		cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *	indicate completion of option-2 TCP connect request.
+ */
+static void bnx2i_cm_connect_cmpl(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
+		ep->state = EP_STATE_CONNECT_FAILED;
+	else if (test_bit(SK_F_OFFLD_COMPLETE, &cm_sk->flags))
+		ep->state = EP_STATE_CONNECT_COMPL;
+	else
+		ep->state = EP_STATE_CONNECT_FAILED;
+
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_close_cmpl - process tcp conn close completion
+ * @cm_sk:	cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *	indicate completion of option-2 graceful TCP connect shutdown
+ */
+static void bnx2i_cm_close_cmpl(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	ep->state = EP_STATE_DISCONN_COMPL;
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_abort_cmpl - process abortive tcp conn teardown completion
+ * @cm_sk:	cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *	indicate completion of option-2 abortive TCP connect termination
+ */
+static void bnx2i_cm_abort_cmpl(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	ep->state = EP_STATE_DISCONN_COMPL;
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_remote_close - process received TCP FIN
+ * @hba:		adapter structure pointer
+ * @update_kcqe:	kcqe pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to indicate
+ *	async TCP events such as FIN
+ */
+static void bnx2i_cm_remote_close(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	ep->state = EP_STATE_TCP_FIN_RCVD;
+	if (ep->conn)
+		bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+}
+
+/**
+ * bnx2i_cm_remote_abort - process TCP RST and start conn cleanup
+ * @hba:		adapter structure pointer
+ * @update_kcqe:	kcqe pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *	indicate async TCP events (RST) sent by the peer.
+ */
+static void bnx2i_cm_remote_abort(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	ep->state = EP_STATE_TCP_RST_RCVD;
+	if (ep->conn)
+		bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+}
+
+
+static void bnx2i_send_nl_mesg(struct cnic_dev *dev, u32 msg_type,
+			       char *buf, u16 buflen)
+{
+	struct bnx2i_hba *hba;
+
+	hba = bnx2i_find_hba_for_cnic(dev);
+	if (!hba)
+		return;
+
+	if (iscsi_offload_mesg(hba->shost, &bnx2i_iscsi_transport,
+				   msg_type, buf, buflen))
+		printk(KERN_ALERT "bnx2i: private nl message send error\n");
+
+}
+
+
+/**
+ * bnx2i_cnic_cb - global template of bnx2i - cnic driver interface structure
+ *			carrying callback function pointers
+ *
+ */
+struct cnic_ulp_ops bnx2i_cnic_cb = {
+	.cnic_init = bnx2i_ulp_init,
+	.cnic_exit = bnx2i_ulp_exit,
+	.cnic_start = bnx2i_start,
+	.cnic_stop = bnx2i_stop,
+	.indicate_kcqes = bnx2i_indicate_kcqe,
+	.indicate_netevent = bnx2i_indicate_netevent,
+	.cm_connect_complete = bnx2i_cm_connect_cmpl,
+	.cm_close_complete = bnx2i_cm_close_cmpl,
+	.cm_abort_complete = bnx2i_cm_abort_cmpl,
+	.cm_remote_close = bnx2i_cm_remote_close,
+	.cm_remote_abort = bnx2i_cm_remote_abort,
+	.iscsi_nl_send_msg = bnx2i_send_nl_mesg,
+	.owner = THIS_MODULE
+};
+
+
+/**
+ * bnx2i_map_ep_dbell_regs - map connection doorbell registers
+ * @ep: bnx2i endpoint
+ *
+ * maps connection's SQ and RQ doorbell registers, 5706/5708/5709 hosts these
+ *	register in BAR #0. Whereas in 57710 these register are accessed by
+ *	mapping BAR #1
+ */
+int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep)
+{
+	u32 cid_num;
+	u32 reg_off;
+	u32 first_l4l5;
+	u32 ctx_sz;
+	u32 config2;
+	resource_size_t reg_base;
+
+	cid_num = bnx2i_get_cid_num(ep);
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+		reg_base = pci_resource_start(ep->hba->pcidev,
+					      BNX2X_DOORBELL_PCI_BAR);
+		reg_off = PAGE_SIZE * (cid_num & 0x1FFFF) + DPM_TRIGER_TYPE;
+		ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off, 4);
+		goto arm_cq;
+	}
+
+	reg_base = ep->hba->netdev->base_addr;
+	if ((test_bit(BNX2I_NX2_DEV_5709, &ep->hba->cnic_dev_type)) &&
+	    (ep->hba->mail_queue_access == BNX2I_MQ_BIN_MODE)) {
+		config2 = REG_RD(ep->hba, BNX2_MQ_CONFIG2);
+		first_l4l5 = config2 & BNX2_MQ_CONFIG2_FIRST_L4L5;
+		ctx_sz = (config2 & BNX2_MQ_CONFIG2_CONT_SZ) >> 3;
+		if (ctx_sz)
+			reg_off = CTX_OFFSET + MAX_CID_CNT * MB_KERNEL_CTX_SIZE
+				  + PAGE_SIZE *
+				  (((cid_num - first_l4l5) / ctx_sz) + 256);
+		else
+			reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
+	} else
+		/* 5709 device in normal node and 5706/5708 devices */
+		reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
+
+	ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off,
+					  MB_KERNEL_CTX_SIZE);
+	if (!ep->qp.ctx_base)
+		return -ENOMEM;
+
+arm_cq:
+	bnx2i_arm_cq_event_coalescing(ep, CNIC_ARM_CQE);
+	return 0;
+}
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
new file mode 100644
index 0000000..ae4b2d5
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -0,0 +1,438 @@
+/* bnx2i.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include "bnx2i.h"
+
+static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list);
+static u32 adapter_count;
+static int bnx2i_reg_device;
+
+#define DRV_MODULE_NAME		"bnx2i"
+#define DRV_MODULE_VERSION	"2.0.1d"
+#define DRV_MODULE_RELDATE	"Mar 25, 2009"
+
+static char version[] __devinitdata =
+		"Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
+		" v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+
+
+MODULE_AUTHOR("Anil Veerabhadrappa <anilgv@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706/5708/5709 iSCSI Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+static DEFINE_RWLOCK(bnx2i_dev_lock);
+
+unsigned int event_coal_div = 1;
+module_param(event_coal_div, int, 0664);
+MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor");
+
+unsigned int en_tcp_dack = 1;
+module_param(en_tcp_dack, int, 0664);
+MODULE_PARM_DESC(en_tcp_dack, "Enable TCP Delayed ACK");
+
+unsigned int error_mask1 = 0x00;
+module_param(error_mask1, int, 0664);
+MODULE_PARM_DESC(error_mask1, "Config FW iSCSI Error Mask #1");
+
+unsigned int error_mask2 = 0x00;
+module_param(error_mask2, int, 0664);
+MODULE_PARM_DESC(error_mask2, "Config FW iSCSI Error Mask #2");
+
+unsigned int sq_size;
+module_param(sq_size, int, 0664);
+MODULE_PARM_DESC(sq_size, "Configure SQ size");
+
+unsigned int rq_size = BNX2I_RQ_WQES_DEFAULT;
+module_param(rq_size, int, 0664);
+MODULE_PARM_DESC(rq_size, "Configure RQ size");
+
+u64 iscsi_error_mask = 0x00;
+
+static void bnx2i_unreg_one_device(struct bnx2i_hba *hba) ;
+
+
+/**
+ * bnx2i_identify_device - identifies NetXtreme II device type
+ * @hba: 		Adapter structure pointer
+ *
+ * This function identifies the NX2 device type and sets appropriate
+ *	queue mailbox register access method, 5709 requires driver to
+ *	access MBOX regs using *bin* mode
+ */
+void bnx2i_identify_device(struct bnx2i_hba *hba)
+{
+	hba->cnic_dev_type = 0;
+	if ((hba->pci_did == PCI_DEVICE_ID_NX2_5706) ||
+	    (hba->pci_did == PCI_DEVICE_ID_NX2_5706S))
+		set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type);
+	else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5708) ||
+	    (hba->pci_did == PCI_DEVICE_ID_NX2_5708S))
+		set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type);
+	else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5709) ||
+	    (hba->pci_did == PCI_DEVICE_ID_NX2_5709S)) {
+		set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type);
+		hba->mail_queue_access = BNX2I_MQ_BIN_MODE;
+	} else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710 ||
+		   hba->pci_did == PCI_DEVICE_ID_NX2_57711)
+		set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type);
+}
+
+
+/**
+ * get_adapter_list_head - returns head of adapter list
+ */
+struct bnx2i_hba *get_adapter_list_head(void)
+{
+	struct bnx2i_hba *hba = NULL;
+	struct bnx2i_hba *tmp_hba;
+
+	if (!adapter_count)
+		goto hba_not_found;
+
+	read_lock(&bnx2i_dev_lock);
+	list_for_each_entry(tmp_hba, &adapter_list, link) {
+		if (tmp_hba->cnic && tmp_hba->cnic->cm_select_dev) {
+			hba = tmp_hba;
+			break;
+		}
+	}
+	read_unlock(&bnx2i_dev_lock);
+hba_not_found:
+	return hba;
+}
+
+
+/**
+ * bnx2i_find_hba_for_cnic - maps cnic device instance to bnx2i adapter instance
+ * @cnic:	pointer to cnic device instance
+ *
+ */
+struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic)
+{
+	struct bnx2i_hba *hba, *temp;
+
+	read_lock(&bnx2i_dev_lock);
+	list_for_each_entry_safe(hba, temp, &adapter_list, link) {
+		if (hba->cnic == cnic) {
+			read_unlock(&bnx2i_dev_lock);
+			return hba;
+		}
+	}
+	read_unlock(&bnx2i_dev_lock);
+	return NULL;
+}
+
+
+/**
+ * bnx2i_start - cnic callback to initialize & start adapter instance
+ * @handle:	transparent handle pointing to adapter structure
+ *
+ * This function maps adapter structure to pcidev structure and initiates
+ *	firmware handshake to enable/initialize on chip iscsi components
+ * 	This bnx2i - cnic interface api callback is issued after following
+ *	2 conditions are met -
+ *	  a) underlying network interface is up (marked by event 'NETDEV_UP'
+ *		from netdev
+ *	  b) bnx2i adapter instance is registered
+ */
+void bnx2i_start(void *handle)
+{
+#define BNX2I_INIT_POLL_TIME	(1000 / HZ)
+	struct bnx2i_hba *hba = handle;
+	int i = HZ;
+
+	bnx2i_send_fw_iscsi_init_msg(hba);
+	while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) && i--)
+		msleep(BNX2I_INIT_POLL_TIME);
+}
+
+
+/**
+ * bnx2i_stop - cnic callback to shutdown adapter instance
+ * @handle:	transparent handle pointing to adapter structure
+ *
+ * driver checks if adapter is already in shutdown mode, if not start
+ *	the shutdown process
+ */
+void bnx2i_stop(void *handle)
+{
+	struct bnx2i_hba *hba = handle;
+
+	/* check if cleanup happened in GOING_DOWN context */
+	clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+	if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
+				&hba->adapter_state))
+		iscsi_host_for_each_session(hba->shost,
+					    bnx2i_drop_session);
+}
+
+/**
+ * bnx2i_register_device - register bnx2i adapter instance with the cnic driver
+ * @hba:	Adapter instance to register
+ *
+ * registers bnx2i adapter instance with the cnic driver while holding the
+ *	adapter structure lock
+ */
+void bnx2i_register_device(struct bnx2i_hba *hba)
+{
+	if (test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
+	    test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		return;
+	}
+
+	hba->cnic->register_device(hba->cnic, CNIC_ULP_ISCSI, hba);
+
+	spin_lock(&hba->lock);
+	bnx2i_reg_device++;
+	spin_unlock(&hba->lock);
+
+	set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+}
+
+
+/**
+ * bnx2i_reg_dev_all - registers all adapter instances with the cnic driver
+ *
+ * registers all bnx2i adapter instances with the cnic driver while holding
+ *	the global resource lock
+ */
+void bnx2i_reg_dev_all(void)
+{
+	struct bnx2i_hba *hba, *temp;
+
+	read_lock(&bnx2i_dev_lock);
+	list_for_each_entry_safe(hba, temp, &adapter_list, link)
+		bnx2i_register_device(hba);
+	read_unlock(&bnx2i_dev_lock);
+}
+
+
+/**
+ * bnx2i_unreg_one_device - unregister adapter instance with the cnic driver
+ * @hba:	Adapter instance to unregister
+ *
+ * registers bnx2i adapter instance with the cnic driver while holding
+ *	the adapter structure lock
+ */
+static void bnx2i_unreg_one_device(struct bnx2i_hba *hba)
+{
+	if (hba->ofld_conns_active ||
+	    !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic) ||
+	    test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state))
+		return;
+
+	hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+
+	spin_lock(&hba->lock);
+	bnx2i_reg_device--;
+	spin_unlock(&hba->lock);
+
+	/* ep_disconnect could come before NETDEV_DOWN, driver won't
+	 * see NETDEV_DOWN as it already unregistered itself.
+	 */
+	hba->adapter_state = 0;
+	clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+}
+
+/**
+ * bnx2i_unreg_dev_all - unregisters all bnx2i instances with the cnic driver
+ *
+ * unregisters all bnx2i adapter instances with the cnic driver while holding
+ *	the global resource lock
+ */
+void bnx2i_unreg_dev_all(void)
+{
+	struct bnx2i_hba *hba, *temp;
+
+	read_lock(&bnx2i_dev_lock);
+	list_for_each_entry_safe(hba, temp, &adapter_list, link)
+		bnx2i_unreg_one_device(hba);
+	read_unlock(&bnx2i_dev_lock);
+}
+
+
+/**
+ * bnx2i_init_one - initialize an adapter instance and allocate memory resources
+ * @hba:	bnx2i adapter instance
+ * @cnic:	cnic device handle
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ *	below. This routine is called from cnic_register_driver() context and
+ *	work horse thread which does majority of device specific initialization
+ */
+static int bnx2i_init_one(struct bnx2i_hba *hba, struct cnic_dev *cnic)
+{
+	int rc;
+
+	read_lock(&bnx2i_dev_lock);
+	if (bnx2i_reg_device &&
+	    !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		rc = cnic->register_device(cnic, CNIC_ULP_ISCSI, hba);
+		if (rc)		/* duplicate registration */
+			printk(KERN_ERR "bnx2i- dev reg failed\n");
+
+		spin_lock(&hba->lock);
+		bnx2i_reg_device++;
+		hba->age++;
+		spin_unlock(&hba->lock);
+
+		set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+	}
+	read_unlock(&bnx2i_dev_lock);
+
+	write_lock(&bnx2i_dev_lock);
+	list_add_tail(&hba->link, &adapter_list);
+	adapter_count++;
+	write_unlock(&bnx2i_dev_lock);
+	return 0;
+}
+
+
+/**
+ * bnx2i_ulp_init - initialize an adapter instance
+ * @dev:	cnic device handle
+ *
+ * Called from cnic_register_driver() context to initialize all enumerated
+ *	cnic devices. This routine allocate adapter structure and other
+ *	device specific resources.
+ */
+void bnx2i_ulp_init(struct cnic_dev *dev)
+{
+	struct bnx2i_hba *hba;
+
+	/* Allocate a HBA structure for this device */
+	hba = bnx2i_alloc_hba(dev);
+	if (!hba) {
+		printk(KERN_ERR "bnx2i init: hba initialization failed\n");
+		return;
+	}
+
+	/* Get PCI related information and update hba struct members */
+	clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+	if (bnx2i_init_one(hba, dev)) {
+		printk(KERN_ERR "bnx2i - hba %p init failed\n", hba);
+		bnx2i_free_hba(hba);
+	} else
+		hba->cnic = dev;
+}
+
+
+/**
+ * bnx2i_ulp_exit - shuts down adapter instance and frees all resources
+ * @dev:	cnic device handle
+ *
+ */
+void bnx2i_ulp_exit(struct cnic_dev *dev)
+{
+	struct bnx2i_hba *hba;
+
+	hba = bnx2i_find_hba_for_cnic(dev);
+	if (!hba) {
+		printk(KERN_INFO "bnx2i_ulp_exit: hba not "
+				 "found, dev 0x%p\n", dev);
+		return;
+	}
+	write_lock(&bnx2i_dev_lock);
+	list_del_init(&hba->link);
+	adapter_count--;
+
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+		clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+
+		spin_lock(&hba->lock);
+		bnx2i_reg_device--;
+		spin_unlock(&hba->lock);
+	}
+	write_unlock(&bnx2i_dev_lock);
+
+	bnx2i_free_hba(hba);
+}
+
+
+/**
+ * bnx2i_mod_init - module init entry point
+ *
+ * initialize any driver wide global data structures such as endpoint pool,
+ *	tcp port manager/queue, sysfs. finally driver will register itself
+ *	with the cnic module
+ */
+static int __init bnx2i_mod_init(void)
+{
+	int err;
+
+	printk(KERN_INFO "%s", version);
+
+	if (!is_power_of_2(sq_size))
+		sq_size = roundup_pow_of_two(sq_size);
+
+	bnx2i_scsi_xport_template =
+			iscsi_register_transport(&bnx2i_iscsi_transport);
+	if (!bnx2i_scsi_xport_template) {
+		printk(KERN_ERR "Could not register bnx2i transport.\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	err = cnic_register_driver(CNIC_ULP_ISCSI, &bnx2i_cnic_cb);
+	if (err) {
+		printk(KERN_ERR "Could not register bnx2i cnic driver.\n");
+		goto unreg_xport;
+	}
+
+	return 0;
+
+unreg_xport:
+	iscsi_unregister_transport(&bnx2i_iscsi_transport);
+out:
+	return err;
+}
+
+
+/**
+ * bnx2i_mod_exit - module cleanup/exit entry point
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ *	in this function. Driver will browse through the adapter list, cleans-up
+ *	each instance, unregisters iscsi transport name and finally driver will
+ *	unregister itself with the cnic module
+ */
+static void __exit bnx2i_mod_exit(void)
+{
+	struct bnx2i_hba *hba;
+
+	write_lock(&bnx2i_dev_lock);
+	while (!list_empty(&adapter_list)) {
+		hba = list_entry(adapter_list.next, struct bnx2i_hba, link);
+		list_del(&hba->link);
+		adapter_count--;
+
+		if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+			hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+			clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+			bnx2i_reg_device--;
+		}
+
+		write_unlock(&bnx2i_dev_lock);
+		bnx2i_free_hba(hba);
+		write_lock(&bnx2i_dev_lock);
+	}
+	write_unlock(&bnx2i_dev_lock);
+
+	iscsi_unregister_transport(&bnx2i_iscsi_transport);
+	cnic_unregister_driver(CNIC_ULP_ISCSI);
+}
+
+module_init(bnx2i_mod_init);
+module_exit(bnx2i_mod_exit);
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
new file mode 100644
index 0000000..f741219
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -0,0 +1,2064 @@
+/*
+ * bnx2i_iscsi.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include <scsi/scsi_tcq.h>
+#include <scsi/libiscsi.h>
+#include "bnx2i.h"
+
+struct scsi_transport_template *bnx2i_scsi_xport_template;
+struct iscsi_transport bnx2i_iscsi_transport;
+static struct scsi_host_template bnx2i_host_template;
+
+/*
+ * Global endpoint resource info
+ */
+static DEFINE_SPINLOCK(bnx2i_resc_lock); /* protects global resources */
+
+
+static int bnx2i_adapter_ready(struct bnx2i_hba *hba)
+{
+	int retval = 0;
+
+	if (!hba || !test_bit(ADAPTER_STATE_UP, &hba->adapter_state) ||
+	    test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
+	    test_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state))
+		retval = -EPERM;
+	return retval;
+}
+
+/**
+ * bnx2i_get_write_cmd_bd_idx - identifies various BD bookmarks
+ * @cmd:		iscsi cmd struct pointer
+ * @buf_off:		absolute buffer offset
+ * @start_bd_off:	u32 pointer to return the offset within the BD
+ *			indicated by 'start_bd_idx' on which 'buf_off' falls
+ * @start_bd_idx:	index of the BD on which 'buf_off' falls
+ *
+ * identifies & marks various bd info for scsi command's imm data,
+ * unsolicited data and the first solicited data seq.
+ */
+static void bnx2i_get_write_cmd_bd_idx(struct bnx2i_cmd *cmd, u32 buf_off,
+				       u32 *start_bd_off, u32 *start_bd_idx)
+{
+	struct iscsi_bd *bd_tbl = cmd->io_tbl.bd_tbl;
+	u32 cur_offset = 0;
+	u32 cur_bd_idx = 0;
+
+	if (buf_off) {
+		while (buf_off >= (cur_offset + bd_tbl->buffer_length)) {
+			cur_offset += bd_tbl->buffer_length;
+			cur_bd_idx++;
+			bd_tbl++;
+		}
+	}
+
+	*start_bd_off = buf_off - cur_offset;
+	*start_bd_idx = cur_bd_idx;
+}
+
+/**
+ * bnx2i_setup_write_cmd_bd_info - sets up BD various information
+ * @task:	transport layer's cmd struct pointer
+ *
+ * identifies & marks various bd info for scsi command's immediate data,
+ * unsolicited data and first solicited data seq which includes BD start
+ * index & BD buf off. his function takes into account iscsi parameter such
+ * as immediate data and unsolicited data is support on this connection.
+ */
+static void bnx2i_setup_write_cmd_bd_info(struct iscsi_task *task)
+{
+	struct bnx2i_cmd *cmd = task->dd_data;
+	u32 start_bd_offset;
+	u32 start_bd_idx;
+	u32 buffer_offset = 0;
+	u32 cmd_len = cmd->req.total_data_transfer_length;
+
+	/* if ImmediateData is turned off & IntialR2T is turned on,
+	 * there will be no immediate or unsolicited data, just return.
+	 */
+	if (!iscsi_task_has_unsol_data(task) && !task->imm_count)
+		return;
+
+	/* Immediate data */
+	buffer_offset += task->imm_count;
+	if (task->imm_count == cmd_len)
+		return;
+
+	if (iscsi_task_has_unsol_data(task)) {
+		bnx2i_get_write_cmd_bd_idx(cmd, buffer_offset,
+					   &start_bd_offset, &start_bd_idx);
+		cmd->req.ud_buffer_offset = start_bd_offset;
+		cmd->req.ud_start_bd_index = start_bd_idx;
+		buffer_offset += task->unsol_r2t.data_length;
+	}
+
+	if (buffer_offset != cmd_len) {
+		bnx2i_get_write_cmd_bd_idx(cmd, buffer_offset,
+					   &start_bd_offset, &start_bd_idx);
+		if ((start_bd_offset > task->conn->session->first_burst) ||
+		    (start_bd_idx > scsi_sg_count(cmd->scsi_cmd))) {
+			int i = 0;
+
+			iscsi_conn_printk(KERN_ALERT, task->conn,
+					  "bnx2i- error, buf offset 0x%x "
+					  "bd_valid %d use_sg %d\n",
+					  buffer_offset, cmd->io_tbl.bd_valid,
+					  scsi_sg_count(cmd->scsi_cmd));
+			for (i = 0; i < cmd->io_tbl.bd_valid; i++)
+				iscsi_conn_printk(KERN_ALERT, task->conn,
+						  "bnx2i err, bd[%d]: len %x\n",
+						  i, cmd->io_tbl.bd_tbl[i].\
+						  buffer_length);
+		}
+		cmd->req.sd_buffer_offset = start_bd_offset;
+		cmd->req.sd_start_bd_index = start_bd_idx;
+	}
+}
+
+
+
+/**
+ * bnx2i_map_scsi_sg - maps IO buffer and prepares the BD table
+ * @hba:	adapter instance
+ * @cmd:	iscsi cmd struct pointer
+ *
+ * map SG list
+ */
+static int bnx2i_map_scsi_sg(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
+{
+	struct scsi_cmnd *sc = cmd->scsi_cmd;
+	struct iscsi_bd *bd = cmd->io_tbl.bd_tbl;
+	struct scatterlist *sg;
+	int byte_count = 0;
+	int bd_count = 0;
+	int sg_count;
+	int sg_len;
+	u64 addr;
+	int i;
+
+	BUG_ON(scsi_sg_count(sc) > ISCSI_MAX_BDS_PER_CMD);
+
+	sg_count = scsi_dma_map(sc);
+
+	scsi_for_each_sg(sc, sg, sg_count, i) {
+		sg_len = sg_dma_len(sg);
+		addr = (u64) sg_dma_address(sg);
+		bd[bd_count].buffer_addr_lo = addr & 0xffffffff;
+		bd[bd_count].buffer_addr_hi = addr >> 32;
+		bd[bd_count].buffer_length = sg_len;
+		bd[bd_count].flags = 0;
+		if (bd_count == 0)
+			bd[bd_count].flags = ISCSI_BD_FIRST_IN_BD_CHAIN;
+
+		byte_count += sg_len;
+		bd_count++;
+	}
+
+	if (bd_count)
+		bd[bd_count - 1].flags |= ISCSI_BD_LAST_IN_BD_CHAIN;
+
+	BUG_ON(byte_count != scsi_bufflen(sc));
+	return bd_count;
+}
+
+/**
+ * bnx2i_iscsi_map_sg_list - maps SG list
+ * @cmd:	iscsi cmd struct pointer
+ *
+ * creates BD list table for the command
+ */
+static void bnx2i_iscsi_map_sg_list(struct bnx2i_cmd *cmd)
+{
+	int bd_count;
+
+	bd_count  = bnx2i_map_scsi_sg(cmd->conn->hba, cmd);
+	if (!bd_count) {
+		struct iscsi_bd *bd = cmd->io_tbl.bd_tbl;
+
+		bd[0].buffer_addr_lo = bd[0].buffer_addr_hi = 0;
+		bd[0].buffer_length = bd[0].flags = 0;
+	}
+	cmd->io_tbl.bd_valid = bd_count;
+}
+
+
+/**
+ * bnx2i_iscsi_unmap_sg_list - unmaps SG list
+ * @cmd:	iscsi cmd struct pointer
+ *
+ * unmap IO buffers and invalidate the BD table
+ */
+void bnx2i_iscsi_unmap_sg_list(struct bnx2i_cmd *cmd)
+{
+	struct scsi_cmnd *sc = cmd->scsi_cmd;
+
+	if (cmd->io_tbl.bd_valid && sc) {
+		scsi_dma_unmap(sc);
+		cmd->io_tbl.bd_valid = 0;
+	}
+}
+
+static void bnx2i_setup_cmd_wqe_template(struct bnx2i_cmd *cmd)
+{
+	memset(&cmd->req, 0x00, sizeof(cmd->req));
+	cmd->req.op_code = 0xFF;
+	cmd->req.bd_list_addr_lo = (u32) cmd->io_tbl.bd_tbl_dma;
+	cmd->req.bd_list_addr_hi =
+		(u32) ((u64) cmd->io_tbl.bd_tbl_dma >> 32);
+
+}
+
+
+/**
+ * bnx2i_bind_conn_to_iscsi_cid - bind conn structure to 'iscsi_cid'
+ * @hba:	pointer to adapter instance
+ * @conn:	pointer to iscsi connection
+ * @iscsi_cid:	iscsi context ID, range 0 - (MAX_CONN - 1)
+ *
+ * update iscsi cid table entry with connection pointer. This enables
+ *	driver to quickly get hold of connection structure pointer in
+ *	completion/interrupt thread using iscsi context ID
+ */
+static int bnx2i_bind_conn_to_iscsi_cid(struct bnx2i_hba *hba,
+					struct bnx2i_conn *bnx2i_conn,
+					u32 iscsi_cid)
+{
+	if (hba && hba->cid_que.conn_cid_tbl[iscsi_cid]) {
+		iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+				 "conn bind - entry #%d not free\n", iscsi_cid);
+		return -EBUSY;
+	}
+
+	hba->cid_que.conn_cid_tbl[iscsi_cid] = bnx2i_conn;
+	return 0;
+}
+
+
+/**
+ * bnx2i_get_conn_from_id - maps an iscsi cid to corresponding conn ptr
+ * @hba:	pointer to adapter instance
+ * @iscsi_cid:	iscsi context ID, range 0 - (MAX_CONN - 1)
+ */
+struct bnx2i_conn *bnx2i_get_conn_from_id(struct bnx2i_hba *hba,
+					  u16 iscsi_cid)
+{
+	if (!hba->cid_que.conn_cid_tbl) {
+		printk(KERN_ERR "bnx2i: ERROR - missing conn<->cid table\n");
+		return NULL;
+
+	} else if (iscsi_cid >= hba->max_active_conns) {
+		printk(KERN_ERR "bnx2i: wrong cid #%d\n", iscsi_cid);
+		return NULL;
+	}
+	return hba->cid_que.conn_cid_tbl[iscsi_cid];
+}
+
+
+/**
+ * bnx2i_alloc_iscsi_cid - allocates a iscsi_cid from free pool
+ * @hba:	pointer to adapter instance
+ */
+static u32 bnx2i_alloc_iscsi_cid(struct bnx2i_hba *hba)
+{
+	int idx;
+
+	if (!hba->cid_que.cid_free_cnt)
+		return -1;
+
+	idx = hba->cid_que.cid_q_cons_idx;
+	hba->cid_que.cid_q_cons_idx++;
+	if (hba->cid_que.cid_q_cons_idx == hba->cid_que.cid_q_max_idx)
+		hba->cid_que.cid_q_cons_idx = 0;
+
+	hba->cid_que.cid_free_cnt--;
+	return hba->cid_que.cid_que[idx];
+}
+
+
+/**
+ * bnx2i_free_iscsi_cid - returns tcp port to free list
+ * @hba: 		pointer to adapter instance
+ * @iscsi_cid:		iscsi context ID to free
+ */
+static void bnx2i_free_iscsi_cid(struct bnx2i_hba *hba, u16 iscsi_cid)
+{
+	int idx;
+
+	if (iscsi_cid == (u16) -1)
+		return;
+
+	hba->cid_que.cid_free_cnt++;
+
+	idx = hba->cid_que.cid_q_prod_idx;
+	hba->cid_que.cid_que[idx] = iscsi_cid;
+	hba->cid_que.conn_cid_tbl[iscsi_cid] = NULL;
+	hba->cid_que.cid_q_prod_idx++;
+	if (hba->cid_que.cid_q_prod_idx == hba->cid_que.cid_q_max_idx)
+		hba->cid_que.cid_q_prod_idx = 0;
+}
+
+
+/**
+ * bnx2i_setup_free_cid_que - sets up free iscsi cid queue
+ * @hba:	pointer to adapter instance
+ *
+ * allocates memory for iscsi cid queue & 'cid - conn ptr' mapping table,
+ * 	and initialize table attributes
+ */
+static int bnx2i_setup_free_cid_que(struct bnx2i_hba *hba)
+{
+	int mem_size;
+	int i;
+
+	mem_size = hba->max_active_conns * sizeof(u32);
+	mem_size = (mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+	hba->cid_que.cid_que_base = kmalloc(mem_size, GFP_KERNEL);
+	if (!hba->cid_que.cid_que_base)
+		return -ENOMEM;
+
+	mem_size = hba->max_active_conns * sizeof(struct bnx2i_conn *);
+	mem_size = (mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+	hba->cid_que.conn_cid_tbl = kmalloc(mem_size, GFP_KERNEL);
+	if (!hba->cid_que.conn_cid_tbl) {
+		kfree(hba->cid_que.cid_que_base);
+		hba->cid_que.cid_que_base = NULL;
+		return -ENOMEM;
+	}
+
+	hba->cid_que.cid_que = (u32 *)hba->cid_que.cid_que_base;
+	hba->cid_que.cid_q_prod_idx = 0;
+	hba->cid_que.cid_q_cons_idx = 0;
+	hba->cid_que.cid_q_max_idx = hba->max_active_conns;
+	hba->cid_que.cid_free_cnt = hba->max_active_conns;
+
+	for (i = 0; i < hba->max_active_conns; i++) {
+		hba->cid_que.cid_que[i] = i;
+		hba->cid_que.conn_cid_tbl[i] = NULL;
+	}
+	return 0;
+}
+
+
+/**
+ * bnx2i_release_free_cid_que - releases 'iscsi_cid' queue resources
+ * @hba:	pointer to adapter instance
+ */
+static void bnx2i_release_free_cid_que(struct bnx2i_hba *hba)
+{
+	kfree(hba->cid_que.cid_que_base);
+	hba->cid_que.cid_que_base = NULL;
+
+	kfree(hba->cid_que.conn_cid_tbl);
+	hba->cid_que.conn_cid_tbl = NULL;
+}
+
+
+/**
+ * bnx2i_alloc_ep - allocates ep structure from global pool
+ * @hba:	pointer to adapter instance
+ *
+ * routine allocates a free endpoint structure from global pool and
+ *	a tcp port to be used for this connection.  Global resource lock,
+ *	'bnx2i_resc_lock' is held while accessing shared global data structures
+ */
+static struct iscsi_endpoint *bnx2i_alloc_ep(struct bnx2i_hba *hba)
+{
+	struct iscsi_endpoint *ep;
+	struct bnx2i_endpoint *bnx2i_ep;
+
+	ep = iscsi_create_endpoint(sizeof(*bnx2i_ep));
+	if (!ep) {
+		printk(KERN_ERR "bnx2i: Could not allocate ep\n");
+		return NULL;
+	}
+
+	bnx2i_ep = ep->dd_data;
+	INIT_LIST_HEAD(&bnx2i_ep->link);
+	bnx2i_ep->state = EP_STATE_IDLE;
+	bnx2i_ep->hba = hba;
+	bnx2i_ep->hba_age = hba->age;
+	hba->ofld_conns_active++;
+	init_waitqueue_head(&bnx2i_ep->ofld_wait);
+	return ep;
+}
+
+
+/**
+ * bnx2i_free_ep - free endpoint
+ * @ep:		pointer to iscsi endpoint structure
+ */
+static void bnx2i_free_ep(struct iscsi_endpoint *ep)
+{
+	struct bnx2i_endpoint *bnx2i_ep = ep->dd_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bnx2i_resc_lock, flags);
+	bnx2i_ep->state = EP_STATE_IDLE;
+	bnx2i_ep->hba->ofld_conns_active--;
+
+	bnx2i_free_iscsi_cid(bnx2i_ep->hba, bnx2i_ep->ep_iscsi_cid);
+	if (bnx2i_ep->conn) {
+		bnx2i_ep->conn->ep = NULL;
+		bnx2i_ep->conn = NULL;
+	}
+
+	bnx2i_ep->hba = NULL;
+	spin_unlock_irqrestore(&bnx2i_resc_lock, flags);
+	iscsi_destroy_endpoint(ep);
+}
+
+
+/**
+ * bnx2i_alloc_bdt - allocates buffer descriptor (BD) table for the command
+ * @hba:	adapter instance pointer
+ * @session:	iscsi session pointer
+ * @cmd:	iscsi command structure
+ */
+static int bnx2i_alloc_bdt(struct bnx2i_hba *hba, struct iscsi_session *session,
+			   struct bnx2i_cmd *cmd)
+{
+	struct io_bdt *io = &cmd->io_tbl;
+	struct iscsi_bd *bd;
+
+	io->bd_tbl = dma_alloc_coherent(&hba->pcidev->dev,
+					ISCSI_MAX_BDS_PER_CMD * sizeof(*bd),
+					&io->bd_tbl_dma, GFP_KERNEL);
+	if (!io->bd_tbl) {
+		iscsi_session_printk(KERN_ERR, session, "Could not "
+				     "allocate bdt.\n");
+		return -ENOMEM;
+	}
+	io->bd_valid = 0;
+	return 0;
+}
+
+/**
+ * bnx2i_destroy_cmd_pool - destroys iscsi command pool and release BD table
+ * @hba:	adapter instance pointer
+ * @session:	iscsi session pointer
+ * @cmd:	iscsi command structure
+ */
+static void bnx2i_destroy_cmd_pool(struct bnx2i_hba *hba,
+				   struct iscsi_session *session)
+{
+	int i;
+
+	for (i = 0; i < session->cmds_max; i++) {
+		struct iscsi_task *task = session->cmds[i];
+		struct bnx2i_cmd *cmd = task->dd_data;
+
+		if (cmd->io_tbl.bd_tbl)
+			dma_free_coherent(&hba->pcidev->dev,
+					  ISCSI_MAX_BDS_PER_CMD *
+					  sizeof(struct iscsi_bd),
+					  cmd->io_tbl.bd_tbl,
+					  cmd->io_tbl.bd_tbl_dma);
+	}
+
+}
+
+
+/**
+ * bnx2i_setup_cmd_pool - sets up iscsi command pool for the session
+ * @hba:	adapter instance pointer
+ * @session:	iscsi session pointer
+ */
+static int bnx2i_setup_cmd_pool(struct bnx2i_hba *hba,
+				struct iscsi_session *session)
+{
+	int i;
+
+	for (i = 0; i < session->cmds_max; i++) {
+		struct iscsi_task *task = session->cmds[i];
+		struct bnx2i_cmd *cmd = task->dd_data;
+
+		/* Anil */
+		task->hdr = &cmd->hdr;
+		task->hdr_max = sizeof(struct iscsi_hdr);
+
+		if (bnx2i_alloc_bdt(hba, session, cmd))
+			goto free_bdts;
+	}
+
+	return 0;
+
+free_bdts:
+	bnx2i_destroy_cmd_pool(hba, session);
+	return -ENOMEM;
+}
+
+
+/**
+ * bnx2i_setup_mp_bdt - allocate BD table resources
+ * @hba:	pointer to adapter structure
+ *
+ * Allocate memory for dummy buffer and associated BD
+ * table to be used by middle path (MP) requests
+ */
+static int bnx2i_setup_mp_bdt(struct bnx2i_hba *hba)
+{
+	int rc = 0;
+	struct iscsi_bd *mp_bdt;
+	u64 addr;
+
+	hba->mp_bd_tbl = dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+					    &hba->mp_bd_dma, GFP_KERNEL);
+	if (!hba->mp_bd_tbl) {
+		printk(KERN_ERR "unable to allocate Middle Path BDT\n");
+		rc = -1;
+		goto out;
+	}
+
+	hba->dummy_buffer = dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+					       &hba->dummy_buf_dma, GFP_KERNEL);
+	if (!hba->dummy_buffer) {
+		printk(KERN_ERR "unable to alloc Middle Path Dummy Buffer\n");
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  hba->mp_bd_tbl, hba->mp_bd_dma);
+		hba->mp_bd_tbl = NULL;
+		rc = -1;
+		goto out;
+	}
+
+	mp_bdt = (struct iscsi_bd *) hba->mp_bd_tbl;
+	addr = (unsigned long) hba->dummy_buf_dma;
+	mp_bdt->buffer_addr_lo = addr & 0xffffffff;
+	mp_bdt->buffer_addr_hi = addr >> 32;
+	mp_bdt->buffer_length = PAGE_SIZE;
+	mp_bdt->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+			ISCSI_BD_FIRST_IN_BD_CHAIN;
+out:
+	return rc;
+}
+
+
+/**
+ * bnx2i_free_mp_bdt - releases ITT back to free pool
+ * @hba:	pointer to adapter instance
+ *
+ * free MP dummy buffer and associated BD table
+ */
+static void bnx2i_free_mp_bdt(struct bnx2i_hba *hba)
+{
+	if (hba->mp_bd_tbl) {
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  hba->mp_bd_tbl, hba->mp_bd_dma);
+		hba->mp_bd_tbl = NULL;
+	}
+	if (hba->dummy_buffer) {
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  hba->dummy_buffer, hba->dummy_buf_dma);
+		hba->dummy_buffer = NULL;
+	}
+		return;
+}
+
+/**
+ * bnx2i_drop_session - notifies iscsid of connection error.
+ * @hba:	adapter instance pointer
+ * @session:	iscsi session pointer
+ *
+ * This notifies iscsid that there is a error, so it can initiate
+ * recovery.
+ *
+ * This relies on caller using the iscsi class iterator so the object
+ * is refcounted and does not disapper from under us.
+ */
+void bnx2i_drop_session(struct iscsi_cls_session *cls_session)
+{
+	iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED);
+}
+
+/**
+ * bnx2i_ep_destroy_list_add - add an entry to EP destroy list
+ * @hba:	pointer to adapter instance
+ * @ep:		pointer to endpoint (transport indentifier) structure
+ *
+ * EP destroy queue manager
+ */
+static int bnx2i_ep_destroy_list_add(struct bnx2i_hba *hba,
+				     struct bnx2i_endpoint *ep)
+{
+	write_lock_bh(&hba->ep_rdwr_lock);
+	list_add_tail(&ep->link, &hba->ep_destroy_list);
+	write_unlock_bh(&hba->ep_rdwr_lock);
+	return 0;
+}
+
+/**
+ * bnx2i_ep_destroy_list_del - add an entry to EP destroy list
+ *
+ * @hba: 		pointer to adapter instance
+ * @ep: 		pointer to endpoint (transport indentifier) structure
+ *
+ * EP destroy queue manager
+ */
+static int bnx2i_ep_destroy_list_del(struct bnx2i_hba *hba,
+				     struct bnx2i_endpoint *ep)
+{
+	write_lock_bh(&hba->ep_rdwr_lock);
+	list_del_init(&ep->link);
+	write_unlock_bh(&hba->ep_rdwr_lock);
+
+	return 0;
+}
+
+/**
+ * bnx2i_ep_ofld_list_add - add an entry to ep offload pending list
+ * @hba:	pointer to adapter instance
+ * @ep:		pointer to endpoint (transport indentifier) structure
+ *
+ * pending conn offload completion queue manager
+ */
+static int bnx2i_ep_ofld_list_add(struct bnx2i_hba *hba,
+				  struct bnx2i_endpoint *ep)
+{
+	write_lock_bh(&hba->ep_rdwr_lock);
+	list_add_tail(&ep->link, &hba->ep_ofld_list);
+	write_unlock_bh(&hba->ep_rdwr_lock);
+	return 0;
+}
+
+/**
+ * bnx2i_ep_ofld_list_del - add an entry to ep offload pending list
+ * @hba: 		pointer to adapter instance
+ * @ep: 		pointer to endpoint (transport indentifier) structure
+ *
+ * pending conn offload completion queue manager
+ */
+static int bnx2i_ep_ofld_list_del(struct bnx2i_hba *hba,
+				  struct bnx2i_endpoint *ep)
+{
+	write_lock_bh(&hba->ep_rdwr_lock);
+	list_del_init(&ep->link);
+	write_unlock_bh(&hba->ep_rdwr_lock);
+	return 0;
+}
+
+
+/**
+ * bnx2i_find_ep_in_ofld_list - find iscsi_cid in pending list of endpoints
+ *
+ * @hba: 		pointer to adapter instance
+ * @iscsi_cid:		iscsi context ID to find
+ *
+ */
+struct bnx2i_endpoint *
+bnx2i_find_ep_in_ofld_list(struct bnx2i_hba *hba, u32 iscsi_cid)
+{
+	struct list_head *list;
+	struct list_head *tmp;
+	struct bnx2i_endpoint *ep;
+
+	read_lock_bh(&hba->ep_rdwr_lock);
+	list_for_each_safe(list, tmp, &hba->ep_ofld_list) {
+		ep = (struct bnx2i_endpoint *)list;
+
+		if (ep->ep_iscsi_cid == iscsi_cid)
+			break;
+		ep = NULL;
+	}
+	read_unlock_bh(&hba->ep_rdwr_lock);
+
+	if (!ep)
+		printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid);
+	return ep;
+}
+
+
+/**
+ * bnx2i_find_ep_in_destroy_list - find iscsi_cid in destroy list
+ * @hba: 		pointer to adapter instance
+ * @iscsi_cid:		iscsi context ID to find
+ *
+ */
+struct bnx2i_endpoint *
+bnx2i_find_ep_in_destroy_list(struct bnx2i_hba *hba, u32 iscsi_cid)
+{
+	struct list_head *list;
+	struct list_head *tmp;
+	struct bnx2i_endpoint *ep;
+
+	read_lock_bh(&hba->ep_rdwr_lock);
+	list_for_each_safe(list, tmp, &hba->ep_destroy_list) {
+		ep = (struct bnx2i_endpoint *)list;
+
+		if (ep->ep_iscsi_cid == iscsi_cid)
+			break;
+		ep = NULL;
+	}
+	read_unlock_bh(&hba->ep_rdwr_lock);
+
+	if (!ep)
+		printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid);
+
+	return ep;
+}
+
+/**
+ * bnx2i_setup_host_queue_size - assigns shost->can_queue param
+ * @hba:	pointer to adapter instance
+ * @shost:	scsi host pointer
+ *
+ * Initializes 'can_queue' parameter based on how many outstanding commands
+ * 	the device can handle. Each device 5708/5709/57710 has different
+ *	capabilities
+ */
+static void bnx2i_setup_host_queue_size(struct bnx2i_hba *hba,
+					struct Scsi_Host *shost)
+{
+	if (test_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type))
+		shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5708;
+	else if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type))
+		shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5709;
+	else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+		shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_57710;
+	else
+		shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5708;
+}
+
+
+/**
+ * bnx2i_alloc_hba - allocate and init adapter instance
+ * @cnic:	cnic device pointer
+ *
+ * allocate & initialize adapter structure and call other
+ *	support routines to do per adapter initialization
+ */
+struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)
+{
+	struct Scsi_Host *shost;
+	struct bnx2i_hba *hba;
+
+	shost = iscsi_host_alloc(&bnx2i_host_template, sizeof(*hba), 0);
+	if (!shost)
+		return NULL;
+	shost->dma_boundary = cnic->pcidev->dma_mask;
+	shost->transportt = bnx2i_scsi_xport_template;
+	shost->max_id = ISCSI_MAX_CONNS_PER_HBA;
+	shost->max_channel = 0;
+	shost->max_lun = 512;
+	shost->max_cmd_len = 16;
+
+	hba = iscsi_host_priv(shost);
+	hba->shost = shost;
+	hba->netdev = cnic->netdev;
+	/* Get PCI related information and update hba struct members */
+	hba->pcidev = cnic->pcidev;
+	pci_dev_get(hba->pcidev);
+	hba->pci_did = hba->pcidev->device;
+	hba->pci_vid = hba->pcidev->vendor;
+	hba->pci_sdid = hba->pcidev->subsystem_device;
+	hba->pci_svid = hba->pcidev->subsystem_vendor;
+	hba->pci_func = PCI_FUNC(hba->pcidev->devfn);
+	hba->pci_devno = PCI_SLOT(hba->pcidev->devfn);
+	bnx2i_identify_device(hba);
+
+	bnx2i_identify_device(hba);
+	bnx2i_setup_host_queue_size(hba, shost);
+
+	if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
+		hba->regview = ioremap_nocache(hba->netdev->base_addr,
+					       BNX2_MQ_CONFIG2);
+		if (!hba->regview)
+			goto ioreg_map_err;
+	} else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+		hba->regview = ioremap_nocache(hba->netdev->base_addr, 4096);
+		if (!hba->regview)
+			goto ioreg_map_err;
+	}
+
+	if (bnx2i_setup_mp_bdt(hba))
+		goto mp_bdt_mem_err;
+
+	INIT_LIST_HEAD(&hba->ep_ofld_list);
+	INIT_LIST_HEAD(&hba->ep_destroy_list);
+	rwlock_init(&hba->ep_rdwr_lock);
+
+	hba->mtu_supported = BNX2I_MAX_MTU_SUPPORTED;
+
+	/* different values for 5708/5709/57710 */
+	hba->max_active_conns = ISCSI_MAX_CONNS_PER_HBA;
+
+	if (bnx2i_setup_free_cid_que(hba))
+		goto cid_que_err;
+
+	/* SQ/RQ/CQ size can be changed via sysfx interface */
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+		if (sq_size && sq_size <= BNX2I_5770X_SQ_WQES_MAX)
+			hba->max_sqes = sq_size;
+		else
+			hba->max_sqes = BNX2I_5770X_SQ_WQES_DEFAULT;
+	} else {	/* 5706/5708/5709 */
+		if (sq_size && sq_size <= BNX2I_570X_SQ_WQES_MAX)
+			hba->max_sqes = sq_size;
+		else
+			hba->max_sqes = BNX2I_570X_SQ_WQES_DEFAULT;
+	}
+
+	hba->max_rqes = rq_size;
+	hba->max_cqes = hba->max_sqes + rq_size;
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+		if (hba->max_cqes > BNX2I_5770X_CQ_WQES_MAX)
+			hba->max_cqes = BNX2I_5770X_CQ_WQES_MAX;
+	} else if (hba->max_cqes > BNX2I_570X_CQ_WQES_MAX)
+		hba->max_cqes = BNX2I_570X_CQ_WQES_MAX;
+
+	hba->num_ccell = hba->max_sqes / 2;
+
+	spin_lock_init(&hba->lock);
+	mutex_init(&hba->net_dev_lock);
+
+	if (iscsi_host_add(shost, &hba->pcidev->dev))
+		goto free_dump_mem;
+	return hba;
+
+free_dump_mem:
+	bnx2i_release_free_cid_que(hba);
+cid_que_err:
+	bnx2i_free_mp_bdt(hba);
+mp_bdt_mem_err:
+	if (hba->regview) {
+		iounmap(hba->regview);
+		hba->regview = NULL;
+	}
+ioreg_map_err:
+	pci_dev_put(hba->pcidev);
+	scsi_host_put(shost);
+	return NULL;
+}
+
+/**
+ * bnx2i_free_hba- releases hba structure and resources held by the adapter
+ * @hba:	pointer to adapter instance
+ *
+ * free adapter structure and call various cleanup routines.
+ */
+void bnx2i_free_hba(struct bnx2i_hba *hba)
+{
+	struct Scsi_Host *shost = hba->shost;
+
+	iscsi_host_remove(shost);
+	INIT_LIST_HEAD(&hba->ep_ofld_list);
+	INIT_LIST_HEAD(&hba->ep_destroy_list);
+	pci_dev_put(hba->pcidev);
+
+	if (hba->regview) {
+		iounmap(hba->regview);
+		hba->regview = NULL;
+	}
+	bnx2i_free_mp_bdt(hba);
+	bnx2i_release_free_cid_que(hba);
+	iscsi_host_free(shost);
+}
+
+/**
+ * bnx2i_conn_free_login_resources - free DMA resources used for login process
+ * @hba:		pointer to adapter instance
+ * @bnx2i_conn:		iscsi connection pointer
+ *
+ * Login related resources, mostly BDT & payload DMA memory is freed
+ */
+static void bnx2i_conn_free_login_resources(struct bnx2i_hba *hba,
+					    struct bnx2i_conn *bnx2i_conn)
+{
+	if (bnx2i_conn->gen_pdu.resp_bd_tbl) {
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  bnx2i_conn->gen_pdu.resp_bd_tbl,
+				  bnx2i_conn->gen_pdu.resp_bd_dma);
+		bnx2i_conn->gen_pdu.resp_bd_tbl = NULL;
+	}
+
+	if (bnx2i_conn->gen_pdu.req_bd_tbl) {
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  bnx2i_conn->gen_pdu.req_bd_tbl,
+				  bnx2i_conn->gen_pdu.req_bd_dma);
+		bnx2i_conn->gen_pdu.req_bd_tbl = NULL;
+	}
+
+	if (bnx2i_conn->gen_pdu.resp_buf) {
+		dma_free_coherent(&hba->pcidev->dev,
+				  ISCSI_DEF_MAX_RECV_SEG_LEN,
+				  bnx2i_conn->gen_pdu.resp_buf,
+				  bnx2i_conn->gen_pdu.resp_dma_addr);
+		bnx2i_conn->gen_pdu.resp_buf = NULL;
+	}
+
+	if (bnx2i_conn->gen_pdu.req_buf) {
+		dma_free_coherent(&hba->pcidev->dev,
+				  ISCSI_DEF_MAX_RECV_SEG_LEN,
+				  bnx2i_conn->gen_pdu.req_buf,
+				  bnx2i_conn->gen_pdu.req_dma_addr);
+		bnx2i_conn->gen_pdu.req_buf = NULL;
+	}
+}
+
+/**
+ * bnx2i_conn_alloc_login_resources - alloc DMA resources for login/nop.
+ * @hba:		pointer to adapter instance
+ * @bnx2i_conn:		iscsi connection pointer
+ *
+ * Mgmt task DNA resources are allocated in this routine.
+ */
+static int bnx2i_conn_alloc_login_resources(struct bnx2i_hba *hba,
+					    struct bnx2i_conn *bnx2i_conn)
+{
+	/* Allocate memory for login request/response buffers */
+	bnx2i_conn->gen_pdu.req_buf =
+		dma_alloc_coherent(&hba->pcidev->dev,
+				   ISCSI_DEF_MAX_RECV_SEG_LEN,
+				   &bnx2i_conn->gen_pdu.req_dma_addr,
+				   GFP_KERNEL);
+	if (bnx2i_conn->gen_pdu.req_buf == NULL)
+		goto login_req_buf_failure;
+
+	bnx2i_conn->gen_pdu.req_buf_size = 0;
+	bnx2i_conn->gen_pdu.req_wr_ptr = bnx2i_conn->gen_pdu.req_buf;
+
+	bnx2i_conn->gen_pdu.resp_buf =
+		dma_alloc_coherent(&hba->pcidev->dev,
+				   ISCSI_DEF_MAX_RECV_SEG_LEN,
+				   &bnx2i_conn->gen_pdu.resp_dma_addr,
+				   GFP_KERNEL);
+	if (bnx2i_conn->gen_pdu.resp_buf == NULL)
+		goto login_resp_buf_failure;
+
+	bnx2i_conn->gen_pdu.resp_buf_size = ISCSI_DEF_MAX_RECV_SEG_LEN;
+	bnx2i_conn->gen_pdu.resp_wr_ptr = bnx2i_conn->gen_pdu.resp_buf;
+
+	bnx2i_conn->gen_pdu.req_bd_tbl =
+		dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				   &bnx2i_conn->gen_pdu.req_bd_dma, GFP_KERNEL);
+	if (bnx2i_conn->gen_pdu.req_bd_tbl == NULL)
+		goto login_req_bd_tbl_failure;
+
+	bnx2i_conn->gen_pdu.resp_bd_tbl =
+		dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				   &bnx2i_conn->gen_pdu.resp_bd_dma,
+				   GFP_KERNEL);
+	if (bnx2i_conn->gen_pdu.resp_bd_tbl == NULL)
+		goto login_resp_bd_tbl_failure;
+
+	return 0;
+
+login_resp_bd_tbl_failure:
+	dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+			  bnx2i_conn->gen_pdu.req_bd_tbl,
+			  bnx2i_conn->gen_pdu.req_bd_dma);
+	bnx2i_conn->gen_pdu.req_bd_tbl = NULL;
+
+login_req_bd_tbl_failure:
+	dma_free_coherent(&hba->pcidev->dev, ISCSI_DEF_MAX_RECV_SEG_LEN,
+			  bnx2i_conn->gen_pdu.resp_buf,
+			  bnx2i_conn->gen_pdu.resp_dma_addr);
+	bnx2i_conn->gen_pdu.resp_buf = NULL;
+login_resp_buf_failure:
+	dma_free_coherent(&hba->pcidev->dev, ISCSI_DEF_MAX_RECV_SEG_LEN,
+			  bnx2i_conn->gen_pdu.req_buf,
+			  bnx2i_conn->gen_pdu.req_dma_addr);
+	bnx2i_conn->gen_pdu.req_buf = NULL;
+login_req_buf_failure:
+	iscsi_conn_printk(KERN_ERR, bnx2i_conn->cls_conn->dd_data,
+			  "login resource alloc failed!!\n");
+	return -ENOMEM;
+
+}
+
+
+/**
+ * bnx2i_iscsi_prep_generic_pdu_bd - prepares BD table.
+ * @bnx2i_conn:		iscsi connection pointer
+ *
+ * Allocates buffers and BD tables before shipping requests to cnic
+ *	for PDUs prepared by 'iscsid' daemon
+ */
+static void bnx2i_iscsi_prep_generic_pdu_bd(struct bnx2i_conn *bnx2i_conn)
+{
+	struct iscsi_bd *bd_tbl;
+
+	bd_tbl = (struct iscsi_bd *) bnx2i_conn->gen_pdu.req_bd_tbl;
+
+	bd_tbl->buffer_addr_hi =
+		(u32) ((u64) bnx2i_conn->gen_pdu.req_dma_addr >> 32);
+	bd_tbl->buffer_addr_lo = (u32) bnx2i_conn->gen_pdu.req_dma_addr;
+	bd_tbl->buffer_length = bnx2i_conn->gen_pdu.req_wr_ptr -
+				bnx2i_conn->gen_pdu.req_buf;
+	bd_tbl->reserved0 = 0;
+	bd_tbl->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+			ISCSI_BD_FIRST_IN_BD_CHAIN;
+
+	bd_tbl = (struct iscsi_bd  *) bnx2i_conn->gen_pdu.resp_bd_tbl;
+	bd_tbl->buffer_addr_hi = (u64) bnx2i_conn->gen_pdu.resp_dma_addr >> 32;
+	bd_tbl->buffer_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_dma_addr;
+	bd_tbl->buffer_length = ISCSI_DEF_MAX_RECV_SEG_LEN;
+	bd_tbl->reserved0 = 0;
+	bd_tbl->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+			ISCSI_BD_FIRST_IN_BD_CHAIN;
+}
+
+
+/**
+ * bnx2i_iscsi_send_generic_request - called to send mgmt tasks.
+ * @task:	transport layer task pointer
+ *
+ * called to transmit PDUs prepared by the 'iscsid' daemon. iSCSI login,
+ *	Nop-out and Logout requests flow through this path.
+ */
+static int bnx2i_iscsi_send_generic_request(struct iscsi_task *task)
+{
+	struct bnx2i_cmd *cmd = task->dd_data;
+	struct bnx2i_conn *bnx2i_conn = cmd->conn;
+	int rc = 0;
+	char *buf;
+	int data_len;
+
+	bnx2i_iscsi_prep_generic_pdu_bd(bnx2i_conn);
+	switch (task->hdr->opcode & ISCSI_OPCODE_MASK) {
+	case ISCSI_OP_LOGIN:
+		bnx2i_send_iscsi_login(bnx2i_conn, task);
+		break;
+	case ISCSI_OP_NOOP_OUT:
+		data_len = bnx2i_conn->gen_pdu.req_buf_size;
+		buf = bnx2i_conn->gen_pdu.req_buf;
+		if (data_len)
+			rc = bnx2i_send_iscsi_nopout(bnx2i_conn, task,
+						     RESERVED_ITT,
+						     buf, data_len, 1);
+		else
+			rc = bnx2i_send_iscsi_nopout(bnx2i_conn, task,
+						     RESERVED_ITT,
+						     NULL, 0, 1);
+		break;
+	case ISCSI_OP_LOGOUT:
+		rc = bnx2i_send_iscsi_logout(bnx2i_conn, task);
+		break;
+	case ISCSI_OP_SCSI_TMFUNC:
+		rc = bnx2i_send_iscsi_tmf(bnx2i_conn, task);
+		break;
+	default:
+		iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+				  "send_gen: unsupported op 0x%x\n",
+				  task->hdr->opcode);
+	}
+	return rc;
+}
+
+
+/**********************************************************************
+ *		SCSI-ML Interface
+ **********************************************************************/
+
+/**
+ * bnx2i_cpy_scsi_cdb - copies LUN & CDB fields in required format to sq wqe
+ * @sc:		SCSI-ML command pointer
+ * @cmd:	iscsi cmd pointer
+ */
+static void bnx2i_cpy_scsi_cdb(struct scsi_cmnd *sc, struct bnx2i_cmd *cmd)
+{
+	u32 dword;
+	int lpcnt;
+	u8 *srcp;
+	u32 *dstp;
+	u32 scsi_lun[2];
+
+	int_to_scsilun(sc->device->lun, (struct scsi_lun *) scsi_lun);
+	cmd->req.lun[0] = be32_to_cpu(scsi_lun[0]);
+	cmd->req.lun[1] = be32_to_cpu(scsi_lun[1]);
+
+	lpcnt = cmd->scsi_cmd->cmd_len / sizeof(dword);
+	srcp = (u8 *) sc->cmnd;
+	dstp = (u32 *) cmd->req.cdb;
+	while (lpcnt--) {
+		memcpy(&dword, (const void *) srcp, 4);
+		*dstp = cpu_to_be32(dword);
+		srcp += 4;
+		dstp++;
+	}
+	if (sc->cmd_len & 0x3) {
+		dword = (u32) srcp[0] | ((u32) srcp[1] << 8);
+		*dstp = cpu_to_be32(dword);
+	}
+}
+
+static void bnx2i_cleanup_task(struct iscsi_task *task)
+{
+	struct iscsi_conn *conn = task->conn;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct bnx2i_hba *hba = bnx2i_conn->hba;
+
+	/*
+	 * mgmt task or cmd was never sent to us to transmit.
+	 */
+	if (!task->sc || task->state == ISCSI_TASK_PENDING)
+		return;
+	/*
+	 * need to clean-up task context to claim dma buffers
+	 */
+	if (task->state == ISCSI_TASK_ABRT_TMF) {
+		bnx2i_send_cmd_cleanup_req(hba, task->dd_data);
+
+		spin_unlock_bh(&conn->session->lock);
+		wait_for_completion_timeout(&bnx2i_conn->cmd_cleanup_cmpl,
+				msecs_to_jiffies(ISCSI_CMD_CLEANUP_TIMEOUT));
+		spin_lock_bh(&conn->session->lock);
+	}
+	bnx2i_iscsi_unmap_sg_list(task->dd_data);
+}
+
+/**
+ * bnx2i_mtask_xmit - transmit mtask to chip for further processing
+ * @conn:	transport layer conn structure pointer
+ * @task:	transport layer command structure pointer
+ */
+static int
+bnx2i_mtask_xmit(struct iscsi_conn *conn, struct iscsi_task *task)
+{
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct bnx2i_cmd *cmd = task->dd_data;
+
+	memset(bnx2i_conn->gen_pdu.req_buf, 0, ISCSI_DEF_MAX_RECV_SEG_LEN);
+
+	bnx2i_setup_cmd_wqe_template(cmd);
+	bnx2i_conn->gen_pdu.req_buf_size = task->data_count;
+	if (task->data_count) {
+		memcpy(bnx2i_conn->gen_pdu.req_buf, task->data,
+		       task->data_count);
+		bnx2i_conn->gen_pdu.req_wr_ptr =
+			bnx2i_conn->gen_pdu.req_buf + task->data_count;
+	}
+	cmd->conn = conn->dd_data;
+	cmd->scsi_cmd = NULL;
+	return bnx2i_iscsi_send_generic_request(task);
+}
+
+/**
+ * bnx2i_task_xmit - transmit iscsi command to chip for further processing
+ * @task:	transport layer command structure pointer
+ *
+ * maps SG buffers and send request to chip/firmware in the form of SQ WQE
+ */
+static int bnx2i_task_xmit(struct iscsi_task *task)
+{
+	struct iscsi_conn *conn = task->conn;
+	struct iscsi_session *session = conn->session;
+	struct Scsi_Host *shost = iscsi_session_to_shost(session->cls_session);
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct scsi_cmnd *sc = task->sc;
+	struct bnx2i_cmd *cmd = task->dd_data;
+	struct iscsi_cmd *hdr = (struct iscsi_cmd *) task->hdr;
+
+	if (test_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state))
+		return -ENOTCONN;
+
+	if (!bnx2i_conn->is_bound)
+		return -ENOTCONN;
+
+	/*
+	 * If there is no scsi_cmnd this must be a mgmt task
+	 */
+	if (!sc)
+		return bnx2i_mtask_xmit(conn, task);
+
+	bnx2i_setup_cmd_wqe_template(cmd);
+	cmd->req.op_code = ISCSI_OP_SCSI_CMD;
+	cmd->conn = bnx2i_conn;
+	cmd->scsi_cmd = sc;
+	cmd->req.total_data_transfer_length = scsi_bufflen(sc);
+	cmd->req.cmd_sn = be32_to_cpu(hdr->cmdsn);
+
+	bnx2i_iscsi_map_sg_list(cmd);
+	bnx2i_cpy_scsi_cdb(sc, cmd);
+
+	cmd->req.op_attr = ISCSI_ATTR_SIMPLE;
+	if (sc->sc_data_direction == DMA_TO_DEVICE) {
+		cmd->req.op_attr |= ISCSI_CMD_REQUEST_WRITE;
+		cmd->req.itt = task->itt |
+			(ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+		bnx2i_setup_write_cmd_bd_info(task);
+	} else {
+		if (scsi_bufflen(sc))
+			cmd->req.op_attr |= ISCSI_CMD_REQUEST_READ;
+		cmd->req.itt = task->itt |
+			(ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+	}
+
+	cmd->req.num_bds = cmd->io_tbl.bd_valid;
+	if (!cmd->io_tbl.bd_valid) {
+		cmd->req.bd_list_addr_lo = (u32) hba->mp_bd_dma;
+		cmd->req.bd_list_addr_hi = (u32) ((u64) hba->mp_bd_dma >> 32);
+		cmd->req.num_bds = 1;
+	}
+
+	bnx2i_send_iscsi_scsicmd(bnx2i_conn, cmd);
+	return 0;
+}
+
+/**
+ * bnx2i_session_create - create a new iscsi session
+ * @cmds_max:		max commands supported
+ * @qdepth:		scsi queue depth to support
+ * @initial_cmdsn:	initial iscsi CMDSN to be used for this session
+ *
+ * Creates a new iSCSI session instance on given device.
+ */
+static struct iscsi_cls_session *
+bnx2i_session_create(struct iscsi_endpoint *ep,
+		     uint16_t cmds_max, uint16_t qdepth,
+		     uint32_t initial_cmdsn)
+{
+	struct Scsi_Host *shost;
+	struct iscsi_cls_session *cls_session;
+	struct bnx2i_hba *hba;
+	struct bnx2i_endpoint *bnx2i_ep;
+
+	if (!ep) {
+		printk(KERN_ERR "bnx2i: missing ep.\n");
+		return NULL;
+	}
+
+	bnx2i_ep = ep->dd_data;
+	shost = bnx2i_ep->hba->shost;
+	hba = iscsi_host_priv(shost);
+	if (bnx2i_adapter_ready(hba))
+		return NULL;
+
+	/*
+	 * user can override hw limit as long as it is within
+	 * the min/max.
+	 */
+	if (cmds_max > hba->max_sqes)
+		cmds_max = hba->max_sqes;
+	else if (cmds_max < BNX2I_SQ_WQES_MIN)
+		cmds_max = BNX2I_SQ_WQES_MIN;
+
+	cls_session = iscsi_session_setup(&bnx2i_iscsi_transport, shost,
+					  cmds_max, sizeof(struct bnx2i_cmd),
+					  initial_cmdsn, ISCSI_MAX_TARGET);
+	if (!cls_session)
+		return NULL;
+
+	if (bnx2i_setup_cmd_pool(hba, cls_session->dd_data))
+		goto session_teardown;
+	return cls_session;
+
+session_teardown:
+	iscsi_session_teardown(cls_session);
+	return NULL;
+}
+
+
+/**
+ * bnx2i_session_destroy - destroys iscsi session
+ * @cls_session:	pointer to iscsi cls session
+ *
+ * Destroys previously created iSCSI session instance and releases
+ *	all resources held by it
+ */
+static void bnx2i_session_destroy(struct iscsi_cls_session *cls_session)
+{
+	struct iscsi_session *session = cls_session->dd_data;
+	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+
+	bnx2i_destroy_cmd_pool(hba, session);
+	iscsi_session_teardown(cls_session);
+}
+
+
+/**
+ * bnx2i_conn_create - create iscsi connection instance
+ * @cls_session:	pointer to iscsi cls session
+ * @cid:		iscsi cid as per rfc (not NX2's CID terminology)
+ *
+ * Creates a new iSCSI connection instance for a given session
+ */
+static struct iscsi_cls_conn *
+bnx2i_conn_create(struct iscsi_cls_session *cls_session, uint32_t cid)
+{
+	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	struct bnx2i_conn *bnx2i_conn;
+	struct iscsi_cls_conn *cls_conn;
+	struct iscsi_conn *conn;
+
+	cls_conn = iscsi_conn_setup(cls_session, sizeof(*bnx2i_conn),
+				    cid);
+	if (!cls_conn)
+		return NULL;
+	conn = cls_conn->dd_data;
+
+	bnx2i_conn = conn->dd_data;
+	bnx2i_conn->cls_conn = cls_conn;
+	bnx2i_conn->hba = hba;
+	/* 'ep' ptr will be assigned in bind() call */
+	bnx2i_conn->ep = NULL;
+	init_completion(&bnx2i_conn->cmd_cleanup_cmpl);
+
+	if (bnx2i_conn_alloc_login_resources(hba, bnx2i_conn)) {
+		iscsi_conn_printk(KERN_ALERT, conn,
+				  "conn_new: login resc alloc failed!!\n");
+		goto free_conn;
+	}
+
+	return cls_conn;
+
+free_conn:
+	iscsi_conn_teardown(cls_conn);
+	return NULL;
+}
+
+/**
+ * bnx2i_conn_bind - binds iscsi sess, conn and ep objects together
+ * @cls_session:	pointer to iscsi cls session
+ * @cls_conn:		pointer to iscsi cls conn
+ * @transport_fd:	64-bit EP handle
+ * @is_leading:		leading connection on this session?
+ *
+ * Binds together iSCSI session instance, iSCSI connection instance
+ *	and the TCP connection. This routine returns error code if
+ *	TCP connection does not belong on the device iSCSI sess/conn
+ *	is bound
+ */
+static int bnx2i_conn_bind(struct iscsi_cls_session *cls_session,
+			   struct iscsi_cls_conn *cls_conn,
+			   uint64_t transport_fd, int is_leading)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	struct bnx2i_endpoint *bnx2i_ep;
+	struct iscsi_endpoint *ep;
+	int ret_code;
+
+	ep = iscsi_lookup_endpoint(transport_fd);
+	if (!ep)
+		return -EINVAL;
+
+	bnx2i_ep = ep->dd_data;
+	if ((bnx2i_ep->state == EP_STATE_TCP_FIN_RCVD) ||
+	    (bnx2i_ep->state == EP_STATE_TCP_RST_RCVD))
+		/* Peer disconnect via' FIN or RST */
+		return -EINVAL;
+
+	if (iscsi_conn_bind(cls_session, cls_conn, is_leading))
+		return -EINVAL;
+
+	if (bnx2i_ep->hba != hba) {
+		/* Error - TCP connection does not belong to this device
+		 */
+		iscsi_conn_printk(KERN_ALERT, cls_conn->dd_data,
+				  "conn bind, ep=0x%p (%s) does not",
+				  bnx2i_ep, bnx2i_ep->hba->netdev->name);
+		iscsi_conn_printk(KERN_ALERT, cls_conn->dd_data,
+				  "belong to hba (%s)\n",
+				  hba->netdev->name);
+		return -EEXIST;
+	}
+
+	bnx2i_ep->conn = bnx2i_conn;
+	bnx2i_conn->ep = bnx2i_ep;
+	bnx2i_conn->iscsi_conn_cid = bnx2i_ep->ep_iscsi_cid;
+	bnx2i_conn->fw_cid = bnx2i_ep->ep_cid;
+	bnx2i_conn->is_bound = 1;
+
+	ret_code = bnx2i_bind_conn_to_iscsi_cid(hba, bnx2i_conn,
+						bnx2i_ep->ep_iscsi_cid);
+
+	/* 5706/5708/5709 FW takes RQ as full when initiated, but for 57710
+	 * driver needs to explicitly replenish RQ index during setup.
+	 */
+	if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_ep->hba->cnic_dev_type))
+		bnx2i_put_rq_buf(bnx2i_conn, 0);
+
+	bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE);
+	return ret_code;
+}
+
+
+/**
+ * bnx2i_conn_destroy - destroy iscsi connection instance & release resources
+ * @cls_conn:	pointer to iscsi cls conn
+ *
+ * Destroy an iSCSI connection instance and release memory resources held by
+ *	this connection
+ */
+static void bnx2i_conn_destroy(struct iscsi_cls_conn *cls_conn)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct Scsi_Host *shost;
+	struct bnx2i_hba *hba;
+
+	shost = iscsi_session_to_shost(iscsi_conn_to_session(cls_conn));
+	hba = iscsi_host_priv(shost);
+
+	bnx2i_conn_free_login_resources(hba, bnx2i_conn);
+	iscsi_conn_teardown(cls_conn);
+}
+
+
+/**
+ * bnx2i_conn_get_param - return iscsi connection parameter to caller
+ * @cls_conn:	pointer to iscsi cls conn
+ * @param:	parameter type identifier
+ * @buf: 	buffer pointer
+ *
+ * returns iSCSI connection parameters
+ */
+static int bnx2i_conn_get_param(struct iscsi_cls_conn *cls_conn,
+				enum iscsi_param param, char *buf)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	int len = 0;
+
+	switch (param) {
+	case ISCSI_PARAM_CONN_PORT:
+		if (bnx2i_conn->ep)
+			len = sprintf(buf, "%hu\n",
+				      bnx2i_conn->ep->cm_sk->dst_port);
+		break;
+	case ISCSI_PARAM_CONN_ADDRESS:
+		if (bnx2i_conn->ep)
+			len = sprintf(buf, NIPQUAD_FMT "\n",
+				      NIPQUAD(bnx2i_conn->ep->cm_sk->dst_ip));
+		break;
+	default:
+		return iscsi_conn_get_param(cls_conn, param, buf);
+	}
+
+	return len;
+}
+
+/**
+ * bnx2i_host_get_param - returns host (adapter) related parameters
+ * @shost:	scsi host pointer
+ * @param:	parameter type identifier
+ * @buf:	buffer pointer
+ */
+static int bnx2i_host_get_param(struct Scsi_Host *shost,
+				enum iscsi_host_param param, char *buf)
+{
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	int len = 0;
+
+	switch (param) {
+	case ISCSI_HOST_PARAM_HWADDRESS:
+		len = sysfs_format_mac(buf, hba->cnic->mac_addr, 6);
+		break;
+	case ISCSI_HOST_PARAM_NETDEV_NAME:
+		len = sprintf(buf, "%s\n", hba->netdev->name);
+		break;
+	default:
+		return iscsi_host_get_param(shost, param, buf);
+	}
+	return len;
+}
+
+/**
+ * bnx2i_conn_start - completes iscsi connection migration to FFP
+ * @cls_conn:	pointer to iscsi cls conn
+ *
+ * last call in FFP migration to handover iscsi conn to the driver
+ */
+static int bnx2i_conn_start(struct iscsi_cls_conn *cls_conn)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+
+	bnx2i_conn->ep->state = EP_STATE_ULP_UPDATE_START;
+	bnx2i_update_iscsi_conn(conn);
+
+	/*
+	 * this should normally not sleep for a long time so it should
+	 * not disrupt the caller.
+	 */
+	bnx2i_conn->ep->ofld_timer.expires = 1 * HZ + jiffies;
+	bnx2i_conn->ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+	bnx2i_conn->ep->ofld_timer.data = (unsigned long) bnx2i_conn->ep;
+	add_timer(&bnx2i_conn->ep->ofld_timer);
+	/* update iSCSI context for this conn, wait for CNIC to complete */
+	wait_event_interruptible(bnx2i_conn->ep->ofld_wait,
+			bnx2i_conn->ep->state != EP_STATE_ULP_UPDATE_START);
+
+	if (signal_pending(current))
+		flush_signals(current);
+	del_timer_sync(&bnx2i_conn->ep->ofld_timer);
+
+	iscsi_conn_start(cls_conn);
+	return 0;
+}
+
+
+/**
+ * bnx2i_conn_get_stats - returns iSCSI stats
+ * @cls_conn:	pointer to iscsi cls conn
+ * @stats:	pointer to iscsi statistic struct
+ */
+static void bnx2i_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+				 struct iscsi_stats *stats)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+
+	stats->txdata_octets = conn->txdata_octets;
+	stats->rxdata_octets = conn->rxdata_octets;
+	stats->scsicmd_pdus = conn->scsicmd_pdus_cnt;
+	stats->dataout_pdus = conn->dataout_pdus_cnt;
+	stats->scsirsp_pdus = conn->scsirsp_pdus_cnt;
+	stats->datain_pdus = conn->datain_pdus_cnt;
+	stats->r2t_pdus = conn->r2t_pdus_cnt;
+	stats->tmfcmd_pdus = conn->tmfcmd_pdus_cnt;
+	stats->tmfrsp_pdus = conn->tmfrsp_pdus_cnt;
+	stats->custom_length = 3;
+	strcpy(stats->custom[2].desc, "eh_abort_cnt");
+	stats->custom[2].value = conn->eh_abort_cnt;
+	stats->digest_err = 0;
+	stats->timeout_err = 0;
+	stats->custom_length = 0;
+}
+
+
+/**
+ * bnx2i_check_route - checks if target IP route belongs to one of NX2 devices
+ * @dst_addr:	target IP address
+ *
+ * check if route resolves to BNX2 device
+ */
+static struct bnx2i_hba *bnx2i_check_route(struct sockaddr *dst_addr)
+{
+	struct sockaddr_in *desti = (struct sockaddr_in *) dst_addr;
+	struct bnx2i_hba *hba;
+	struct cnic_dev *cnic = NULL;
+
+	bnx2i_reg_dev_all();
+
+	hba = get_adapter_list_head();
+	if (hba && hba->cnic)
+		cnic = hba->cnic->cm_select_dev(desti, CNIC_ULP_ISCSI);
+	if (!cnic) {
+		printk(KERN_ALERT "bnx2i: no route,"
+		       "can't connect using cnic\n");
+		goto no_nx2_route;
+	}
+	hba = bnx2i_find_hba_for_cnic(cnic);
+	if (!hba)
+		goto no_nx2_route;
+
+	if (bnx2i_adapter_ready(hba)) {
+		printk(KERN_ALERT "bnx2i: check route, hba not found\n");
+		goto no_nx2_route;
+	}
+	if (hba->netdev->mtu > hba->mtu_supported) {
+		printk(KERN_ALERT "bnx2i: %s network i/f mtu is set to %d\n",
+				  hba->netdev->name, hba->netdev->mtu);
+		printk(KERN_ALERT "bnx2i: iSCSI HBA can support mtu of %d\n",
+				  hba->mtu_supported);
+		goto no_nx2_route;
+	}
+	return hba;
+no_nx2_route:
+	return NULL;
+}
+
+
+/**
+ * bnx2i_tear_down_conn - tear down iscsi/tcp connection and free resources
+ * @hba:	pointer to adapter instance
+ * @ep:		endpoint (transport indentifier) structure
+ *
+ * destroys cm_sock structure and on chip iscsi context
+ */
+static int bnx2i_tear_down_conn(struct bnx2i_hba *hba,
+				 struct bnx2i_endpoint *ep)
+{
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic))
+		hba->cnic->cm_destroy(ep->cm_sk);
+
+	if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
+		ep->state = EP_STATE_DISCONN_COMPL;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type) &&
+	    ep->state == EP_STATE_DISCONN_TIMEDOUT) {
+		printk(KERN_ALERT "bnx2i - ERROR - please submit GRC Dump,"
+				  " NW/PCIe trace, driver msgs to developers"
+				  " for analysis\n");
+		return 1;
+	}
+
+	ep->state = EP_STATE_CLEANUP_START;
+	init_timer(&ep->ofld_timer);
+	ep->ofld_timer.expires = 10*HZ + jiffies;
+	ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+	ep->ofld_timer.data = (unsigned long) ep;
+	add_timer(&ep->ofld_timer);
+
+	bnx2i_ep_destroy_list_add(hba, ep);
+
+	/* destroy iSCSI context, wait for it to complete */
+	bnx2i_send_conn_destroy(hba, ep);
+	wait_event_interruptible(ep->ofld_wait,
+				 (ep->state != EP_STATE_CLEANUP_START));
+
+	if (signal_pending(current))
+		flush_signals(current);
+	del_timer_sync(&ep->ofld_timer);
+
+	bnx2i_ep_destroy_list_del(hba, ep);
+
+	if (ep->state != EP_STATE_CLEANUP_CMPL)
+		/* should never happen */
+		printk(KERN_ALERT "bnx2i - conn destroy failed\n");
+
+	return 0;
+}
+
+
+/**
+ * bnx2i_ep_connect - establish TCP connection to target portal
+ * @shost:		scsi host
+ * @dst_addr:		target IP address
+ * @non_blocking:	blocking or non-blocking call
+ *
+ * this routine initiates the TCP/IP connection by invoking Option-2 i/f
+ *	with l5_core and the CNIC. This is a multi-step process of resolving
+ *	route to target, create a iscsi connection context, handshaking with
+ *	CNIC module to create/initialize the socket struct and finally
+ *	sending down option-2 request to complete TCP 3-way handshake
+ */
+static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
+					       struct sockaddr *dst_addr,
+					       int non_blocking)
+{
+	u32 iscsi_cid = BNX2I_CID_RESERVED;
+	struct sockaddr_in *desti = (struct sockaddr_in *) dst_addr;
+	struct sockaddr_in6 *desti6;
+	struct bnx2i_endpoint *bnx2i_ep;
+	struct bnx2i_hba *hba;
+	struct cnic_dev *cnic;
+	struct cnic_sockaddr saddr;
+	struct iscsi_endpoint *ep;
+	int rc = 0;
+
+	if (shost)
+		/* driver is given scsi host to work with */
+		hba = iscsi_host_priv(shost);
+	else
+		/*
+		 * check if the given destination can be reached through
+		 * a iscsi capable NetXtreme2 device
+		 */
+		hba = bnx2i_check_route(dst_addr);
+	if (!hba) {
+		rc = -ENOMEM;
+		goto check_busy;
+	}
+
+	cnic = hba->cnic;
+	ep = bnx2i_alloc_ep(hba);
+	if (!ep) {
+		rc = -ENOMEM;
+		goto check_busy;
+	}
+	bnx2i_ep = ep->dd_data;
+
+	mutex_lock(&hba->net_dev_lock);
+	if (bnx2i_adapter_ready(hba)) {
+		rc = -EPERM;
+		goto net_if_down;
+	}
+
+	bnx2i_ep->state = EP_STATE_IDLE;
+	bnx2i_ep->ep_iscsi_cid = (u16) -1;
+	bnx2i_ep->num_active_cmds = 0;
+	iscsi_cid = bnx2i_alloc_iscsi_cid(hba);
+	if (iscsi_cid == -1) {
+		printk(KERN_ALERT "alloc_ep: unable to allocate iscsi cid\n");
+		rc = -ENOMEM;
+		goto iscsi_cid_err;
+	}
+	bnx2i_ep->hba_age = hba->age;
+
+	rc = bnx2i_alloc_qp_resc(hba, bnx2i_ep);
+	if (rc != 0) {
+		printk(KERN_ALERT "bnx2i: ep_conn, alloc QP resc error\n");
+		rc = -ENOMEM;
+		goto qp_resc_err;
+	}
+
+	bnx2i_ep->ep_iscsi_cid = (u16)iscsi_cid;
+	bnx2i_ep->state = EP_STATE_OFLD_START;
+	bnx2i_ep_ofld_list_add(hba, bnx2i_ep);
+
+	init_timer(&bnx2i_ep->ofld_timer);
+	bnx2i_ep->ofld_timer.expires = 2 * HZ + jiffies;
+	bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+	bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
+	add_timer(&bnx2i_ep->ofld_timer);
+
+	bnx2i_send_conn_ofld_req(hba, bnx2i_ep);
+
+	/* Wait for CNIC hardware to setup conn context and return 'cid' */
+	wait_event_interruptible(bnx2i_ep->ofld_wait,
+				 bnx2i_ep->state != EP_STATE_OFLD_START);
+
+	if (signal_pending(current))
+		flush_signals(current);
+	del_timer_sync(&bnx2i_ep->ofld_timer);
+
+	bnx2i_ep_ofld_list_del(hba, bnx2i_ep);
+
+	if (bnx2i_ep->state != EP_STATE_OFLD_COMPL) {
+		rc = -ENOSPC;
+		goto conn_failed;
+	}
+
+	rc = cnic->cm_create(cnic, CNIC_ULP_ISCSI, bnx2i_ep->ep_cid,
+			     iscsi_cid, &bnx2i_ep->cm_sk, bnx2i_ep);
+	if (rc) {
+		rc = -EINVAL;
+		goto conn_failed;
+	}
+
+	bnx2i_ep->cm_sk->rcv_buf = 256 * 1024;
+	bnx2i_ep->cm_sk->snd_buf = 256 * 1024;
+	clear_bit(SK_TCP_TIMESTAMP, &bnx2i_ep->cm_sk->tcp_flags);
+
+	memset(&saddr, 0, sizeof(saddr));
+	if (dst_addr->sa_family == AF_INET) {
+		desti = (struct sockaddr_in *) dst_addr;
+		saddr.remote.v4 = *desti;
+		saddr.local.v4.sin_family = desti->sin_family;
+	} else if (dst_addr->sa_family == AF_INET6) {
+		desti6 = (struct sockaddr_in6 *) dst_addr;
+		saddr.remote.v6 = *desti6;
+		saddr.local.v6.sin6_family = desti6->sin6_family;
+	}
+
+	bnx2i_ep->timestamp = jiffies;
+	bnx2i_ep->state = EP_STATE_CONNECT_START;
+	if (!test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		rc = -EINVAL;
+		goto conn_failed;
+	} else
+		rc = cnic->cm_connect(bnx2i_ep->cm_sk, &saddr);
+
+	if (rc)
+		goto release_ep;
+
+	if (bnx2i_map_ep_dbell_regs(bnx2i_ep))
+		goto release_ep;
+	mutex_unlock(&hba->net_dev_lock);
+	return ep;
+
+release_ep:
+	if (bnx2i_tear_down_conn(hba, bnx2i_ep)) {
+		mutex_unlock(&hba->net_dev_lock);
+		return ERR_PTR(rc);
+	}
+conn_failed:
+net_if_down:
+iscsi_cid_err:
+	bnx2i_free_qp_resc(hba, bnx2i_ep);
+qp_resc_err:
+	bnx2i_free_ep(ep);
+	mutex_unlock(&hba->net_dev_lock);
+check_busy:
+	bnx2i_unreg_dev_all();
+	return ERR_PTR(rc);
+}
+
+
+/**
+ * bnx2i_ep_poll - polls for TCP connection establishement
+ * @ep:			TCP connection (endpoint) handle
+ * @timeout_ms:		timeout value in milli secs
+ *
+ * polls for TCP connect request to complete
+ */
+static int bnx2i_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
+{
+	struct bnx2i_endpoint *bnx2i_ep;
+	int rc = 0;
+
+	bnx2i_ep = ep->dd_data;
+	if ((bnx2i_ep->state == EP_STATE_IDLE) ||
+	    (bnx2i_ep->state == EP_STATE_CONNECT_FAILED) ||
+	    (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+		return -1;
+	if (bnx2i_ep->state == EP_STATE_CONNECT_COMPL)
+		return 1;
+
+	rc = wait_event_interruptible_timeout(bnx2i_ep->ofld_wait,
+					      ((bnx2i_ep->state ==
+						EP_STATE_OFLD_FAILED) ||
+					       (bnx2i_ep->state ==
+						EP_STATE_CONNECT_FAILED) ||
+					       (bnx2i_ep->state ==
+						EP_STATE_CONNECT_COMPL)),
+					      msecs_to_jiffies(timeout_ms));
+	if (!rc || (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+		rc = -1;
+
+	if (rc > 0)
+		return 1;
+	else if (!rc)
+		return 0;	/* timeout */
+	else
+		return rc;
+}
+
+
+/**
+ * bnx2i_ep_tcp_conn_active - check EP state transition
+ * @ep:		endpoint pointer
+ *
+ * check if underlying TCP connection is active
+ */
+static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint *bnx2i_ep)
+{
+	int ret;
+	int cnic_dev_10g = 0;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_ep->hba->cnic_dev_type))
+		cnic_dev_10g = 1;
+
+	switch (bnx2i_ep->state) {
+	case EP_STATE_CONNECT_START:
+	case EP_STATE_CLEANUP_FAILED:
+	case EP_STATE_OFLD_FAILED:
+	case EP_STATE_DISCONN_TIMEDOUT:
+		ret = 0;
+		break;
+	case EP_STATE_CONNECT_COMPL:
+	case EP_STATE_ULP_UPDATE_START:
+	case EP_STATE_ULP_UPDATE_COMPL:
+	case EP_STATE_TCP_FIN_RCVD:
+	case EP_STATE_ULP_UPDATE_FAILED:
+		ret = 1;
+		break;
+	case EP_STATE_TCP_RST_RCVD:
+		ret = 0;
+		break;
+	case EP_STATE_CONNECT_FAILED:
+		if (cnic_dev_10g)
+			ret = 1;
+		else
+			ret = 0;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+
+/**
+ * bnx2i_ep_disconnect - executes TCP connection teardown process
+ * @ep:		TCP connection (endpoint) handle
+ *
+ * executes  TCP connection teardown process
+ */
+static void bnx2i_ep_disconnect(struct iscsi_endpoint *ep)
+{
+	struct bnx2i_endpoint *bnx2i_ep;
+	struct bnx2i_conn *bnx2i_conn = NULL;
+	struct iscsi_session *session = NULL;
+	struct iscsi_conn *conn;
+	struct cnic_dev *cnic;
+	struct bnx2i_hba *hba;
+
+	bnx2i_ep = ep->dd_data;
+
+	/* driver should not attempt connection cleanup untill TCP_CONNECT
+	 * completes either successfully or fails. Timeout is 9-secs, so
+	 * wait for it to complete
+	 */
+	while ((bnx2i_ep->state == EP_STATE_CONNECT_START) &&
+		!time_after(jiffies, bnx2i_ep->timestamp + (12 * HZ)))
+		msleep(250);
+
+	if (bnx2i_ep->conn) {
+		bnx2i_conn = bnx2i_ep->conn;
+		conn = bnx2i_conn->cls_conn->dd_data;
+		session = conn->session;
+
+		spin_lock_bh(&session->lock);
+		bnx2i_conn->is_bound = 0;
+		spin_unlock_bh(&session->lock);
+	}
+
+	hba = bnx2i_ep->hba;
+	if (bnx2i_ep->state == EP_STATE_IDLE)
+		goto return_bnx2i_ep;
+	cnic = hba->cnic;
+
+	mutex_lock(&hba->net_dev_lock);
+
+	if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
+		goto free_resc;
+	if (bnx2i_ep->hba_age != hba->age)
+		goto free_resc;
+
+	if (!bnx2i_ep_tcp_conn_active(bnx2i_ep))
+		goto destory_conn;
+
+	bnx2i_ep->state = EP_STATE_DISCONN_START;
+
+	init_timer(&bnx2i_ep->ofld_timer);
+	bnx2i_ep->ofld_timer.expires = 10*HZ + jiffies;
+	bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+	bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
+	add_timer(&bnx2i_ep->ofld_timer);
+
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		int close = 0;
+
+		if (session) {
+			spin_lock_bh(&session->lock);
+			if (session->state == ISCSI_STATE_LOGGING_OUT)
+				close = 1;
+			spin_unlock_bh(&session->lock);
+		}
+		if (close)
+			cnic->cm_close(bnx2i_ep->cm_sk);
+		else
+			cnic->cm_abort(bnx2i_ep->cm_sk);
+	} else
+		goto free_resc;
+
+	/* wait for option-2 conn teardown */
+	wait_event_interruptible(bnx2i_ep->ofld_wait,
+				 bnx2i_ep->state != EP_STATE_DISCONN_START);
+
+	if (signal_pending(current))
+		flush_signals(current);
+	del_timer_sync(&bnx2i_ep->ofld_timer);
+
+destory_conn:
+	if (bnx2i_tear_down_conn(hba, bnx2i_ep)) {
+		mutex_unlock(&hba->net_dev_lock);
+		return;
+	}
+free_resc:
+	mutex_unlock(&hba->net_dev_lock);
+	bnx2i_free_qp_resc(hba, bnx2i_ep);
+return_bnx2i_ep:
+	if (bnx2i_conn)
+		bnx2i_conn->ep = NULL;
+
+	bnx2i_free_ep(ep);
+
+	if (!hba->ofld_conns_active)
+		bnx2i_unreg_dev_all();
+}
+
+
+/**
+ * bnx2i_nl_set_path - ISCSI_UEVENT_PATH_UPDATE user message handler
+ * @buf:	pointer to buffer containing iscsi path message
+ *
+ */
+static int bnx2i_nl_set_path(struct Scsi_Host *shost, struct iscsi_path *params)
+{
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	char *buf = (char *) params;
+	u16 len = sizeof(*params);
+
+	/* handled by cnic driver */
+	hba->cnic->iscsi_nl_msg_recv(hba->cnic, ISCSI_UEVENT_PATH_UPDATE, buf,
+				     len);
+
+	return 0;
+}
+
+
+/*
+ * 'Scsi_Host_Template' structure and 'iscsi_tranport' structure template
+ * used while registering with the scsi host and iSCSI transport module.
+ */
+static struct scsi_host_template bnx2i_host_template = {
+	.module			= THIS_MODULE,
+	.name			= "Broadcom Offload iSCSI Initiator",
+	.proc_name		= "bnx2i",
+	.queuecommand		= iscsi_queuecommand,
+	.eh_abort_handler	= iscsi_eh_abort,
+	.eh_device_reset_handler = iscsi_eh_device_reset,
+	.eh_target_reset_handler = iscsi_eh_target_reset,
+	.can_queue		= 1024,
+	.max_sectors		= 127,
+	.cmd_per_lun		= 32,
+	.this_id		= -1,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.sg_tablesize		= ISCSI_MAX_BDS_PER_CMD,
+	.shost_attrs		= bnx2i_dev_attributes,
+};
+
+struct iscsi_transport bnx2i_iscsi_transport = {
+	.owner			= THIS_MODULE,
+	.name			= "bnx2i",
+	.caps			= CAP_RECOVERY_L0 | CAP_HDRDGST |
+				  CAP_MULTI_R2T | CAP_DATADGST |
+				  CAP_DATA_PATH_OFFLOAD,
+	.param_mask		= ISCSI_MAX_RECV_DLENGTH |
+				  ISCSI_MAX_XMIT_DLENGTH |
+				  ISCSI_HDRDGST_EN |
+				  ISCSI_DATADGST_EN |
+				  ISCSI_INITIAL_R2T_EN |
+				  ISCSI_MAX_R2T |
+				  ISCSI_IMM_DATA_EN |
+				  ISCSI_FIRST_BURST |
+				  ISCSI_MAX_BURST |
+				  ISCSI_PDU_INORDER_EN |
+				  ISCSI_DATASEQ_INORDER_EN |
+				  ISCSI_ERL |
+				  ISCSI_CONN_PORT |
+				  ISCSI_CONN_ADDRESS |
+				  ISCSI_EXP_STATSN |
+				  ISCSI_PERSISTENT_PORT |
+				  ISCSI_PERSISTENT_ADDRESS |
+				  ISCSI_TARGET_NAME | ISCSI_TPGT |
+				  ISCSI_USERNAME | ISCSI_PASSWORD |
+				  ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
+				  ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
+				  ISCSI_LU_RESET_TMO |
+				  ISCSI_PING_TMO | ISCSI_RECV_TMO |
+				  ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
+	.host_param_mask	= ISCSI_HOST_HWADDRESS | ISCSI_HOST_NETDEV_NAME,
+	.create_session		= bnx2i_session_create,
+	.destroy_session	= bnx2i_session_destroy,
+	.create_conn		= bnx2i_conn_create,
+	.bind_conn		= bnx2i_conn_bind,
+	.destroy_conn		= bnx2i_conn_destroy,
+	.set_param		= iscsi_set_param,
+	.get_conn_param		= bnx2i_conn_get_param,
+	.get_session_param	= iscsi_session_get_param,
+	.get_host_param		= bnx2i_host_get_param,
+	.start_conn		= bnx2i_conn_start,
+	.stop_conn		= iscsi_conn_stop,
+	.send_pdu		= iscsi_conn_send_pdu,
+	.xmit_task		= bnx2i_task_xmit,
+	.get_stats		= bnx2i_conn_get_stats,
+	/* TCP connect - disconnect - option-2 interface calls */
+	.ep_connect		= bnx2i_ep_connect,
+	.ep_poll		= bnx2i_ep_poll,
+	.ep_disconnect		= bnx2i_ep_disconnect,
+	.set_path		= bnx2i_nl_set_path,
+	/* Error recovery timeout call */
+	.session_recovery_timedout = iscsi_session_recovery_timedout,
+	.cleanup_task		= bnx2i_cleanup_task,
+};
diff --git a/drivers/scsi/bnx2i/bnx2i_sysfs.c b/drivers/scsi/bnx2i/bnx2i_sysfs.c
new file mode 100644
index 0000000..96426b7
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_sysfs.c
@@ -0,0 +1,142 @@
+/* bnx2i_sysfs.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2004 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include "bnx2i.h"
+
+/**
+ * bnx2i_dev_to_hba - maps dev pointer to adapter struct
+ * @dev:	device pointer
+ *
+ * Map device to hba structure
+ */
+static inline struct bnx2i_hba *bnx2i_dev_to_hba(struct device *dev)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	return iscsi_host_priv(shost);
+}
+
+
+/**
+ * bnx2i_show_sq_info - return(s currently configured send queue (SQ) size
+ * @dev:	device pointer
+ * @buf:	buffer to return current SQ size parameter
+ *
+ * Returns current SQ size parameter, this paramater determines the number
+ * outstanding iSCSI commands supported on a connection
+ */
+static ssize_t bnx2i_show_sq_info(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+	return sprintf(buf, "0x%x\n", hba->max_sqes);
+}
+
+
+/**
+ * bnx2i_set_sq_info - update send queue (SQ) size parameter
+ * @dev:	device pointer
+ * @buf:	buffer to return current SQ size parameter
+ * @count:	parameter buffer size
+ *
+ * Interface for user to change shared queue size allocated for each conn
+ * Must be within SQ limits and a power of 2. For the latter this is needed
+ * because of how libiscsi preallocates tasks.
+ */
+static ssize_t bnx2i_set_sq_info(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+	u32 val;
+	int max_sq_size;
+
+	if (hba->ofld_conns_active)
+		goto skip_config;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+		max_sq_size = BNX2I_5770X_SQ_WQES_MAX;
+	else
+		max_sq_size = BNX2I_570X_SQ_WQES_MAX;
+
+	if (sscanf(buf, " 0x%x ", &val) > 0) {
+		if ((val >= BNX2I_SQ_WQES_MIN) && (val <= max_sq_size) &&
+		    (is_power_of_2(val)))
+			hba->max_sqes = val;
+	}
+
+	return count;
+
+skip_config:
+	printk(KERN_ERR "bnx2i: device busy, cannot change SQ size\n");
+	return 0;
+}
+
+
+/**
+ * bnx2i_show_ccell_info - returns command cell (HQ) size
+ * @dev:	device pointer
+ * @buf:	buffer to return current SQ size parameter
+ *
+ * returns per-connection TCP history queue size parameter
+ */
+static ssize_t bnx2i_show_ccell_info(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+	return sprintf(buf, "0x%x\n", hba->num_ccell);
+}
+
+
+/**
+ * bnx2i_get_link_state - set command cell (HQ) size
+ * @dev:	device pointer
+ * @buf:	buffer to return current SQ size parameter
+ * @count:	parameter buffer size
+ *
+ * updates per-connection TCP history queue size parameter
+ */
+static ssize_t bnx2i_set_ccell_info(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	u32 val;
+	struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+	if (hba->ofld_conns_active)
+		goto skip_config;
+
+	if (sscanf(buf, " 0x%x ", &val) > 0) {
+		if ((val >= BNX2I_CCELLS_MIN) &&
+		    (val <= BNX2I_CCELLS_MAX)) {
+			hba->num_ccell = val;
+		}
+	}
+
+	return count;
+
+skip_config:
+	printk(KERN_ERR "bnx2i: device busy, cannot change CCELL size\n");
+	return 0;
+}
+
+
+static DEVICE_ATTR(sq_size, S_IRUGO | S_IWUSR,
+		   bnx2i_show_sq_info, bnx2i_set_sq_info);
+static DEVICE_ATTR(num_ccell, S_IRUGO | S_IWUSR,
+		   bnx2i_show_ccell_info, bnx2i_set_ccell_info);
+
+struct device_attribute *bnx2i_dev_attributes[] = {
+	&dev_attr_sq_size,
+	&dev_attr_num_ccell,
+	NULL
+};
diff --git a/drivers/scsi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgb3i/cxgb3i.h
index 59b0958d..e3133b5 100644
--- a/drivers/scsi/cxgb3i/cxgb3i.h
+++ b/drivers/scsi/cxgb3i/cxgb3i.h
@@ -144,7 +144,6 @@
 void cxgb3i_adapter_open(struct t3cdev *);
 void cxgb3i_adapter_close(struct t3cdev *);
 
-struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *);
 struct cxgb3i_hba *cxgb3i_hba_host_add(struct cxgb3i_adapter *,
 				       struct net_device *);
 void cxgb3i_hba_host_remove(struct cxgb3i_hba *);
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index 9212400..74369a3 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -13,6 +13,7 @@
 
 #include <linux/inet.h>
 #include <linux/crypto.h>
+#include <net/dst.h>
 #include <net/tcp.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -178,7 +179,7 @@
  * cxgb3i_hba_find_by_netdev - find the cxgb3i_hba structure via net_device
  * @t3dev: t3cdev adapter
  */
-struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev)
+static struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev)
 {
 	struct cxgb3i_adapter *snic;
 	int i;
@@ -261,20 +262,27 @@
 
 /**
  * cxgb3i_ep_connect - establish TCP connection to target portal
+ * @shost:		scsi host to use
  * @dst_addr:		target IP address
  * @non_blocking:	blocking or non-blocking call
  *
  * Initiates a TCP/IP connection to the dst_addr
  */
-static struct iscsi_endpoint *cxgb3i_ep_connect(struct sockaddr *dst_addr,
+static struct iscsi_endpoint *cxgb3i_ep_connect(struct Scsi_Host *shost,
+						struct sockaddr *dst_addr,
 						int non_blocking)
 {
 	struct iscsi_endpoint *ep;
 	struct cxgb3i_endpoint *cep;
-	struct cxgb3i_hba *hba;
+	struct cxgb3i_hba *hba = NULL;
 	struct s3_conn *c3cn = NULL;
 	int err = 0;
 
+	if (shost)
+		hba = iscsi_host_priv(shost);
+
+	cxgb3i_api_debug("shost 0x%p, hba 0x%p.\n", shost, hba);
+
 	c3cn = cxgb3i_c3cn_create();
 	if (!c3cn) {
 		cxgb3i_log_info("ep connect OOM.\n");
@@ -282,17 +290,27 @@
 		goto release_conn;
 	}
 
-	err = cxgb3i_c3cn_connect(c3cn, (struct sockaddr_in *)dst_addr);
+	err = cxgb3i_c3cn_connect(hba ? hba->ndev : NULL, c3cn,
+				 (struct sockaddr_in *)dst_addr);
 	if (err < 0) {
 		cxgb3i_log_info("ep connect failed.\n");
 		goto release_conn;
 	}
+
 	hba = cxgb3i_hba_find_by_netdev(c3cn->dst_cache->dev);
 	if (!hba) {
 		err = -ENOSPC;
 		cxgb3i_log_info("NOT going through cxgbi device.\n");
 		goto release_conn;
 	}
+
+	if (shost && hba != iscsi_host_priv(shost)) {
+		err = -ENOSPC;
+		cxgb3i_log_info("Could not connect through request host%u\n",
+				shost->host_no);
+		goto release_conn;
+	}
+
 	if (c3cn_is_closing(c3cn)) {
 		err = -ENOSPC;
 		cxgb3i_log_info("ep connect unable to connect.\n");
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index e11c9c1..c1d5be4 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -1479,12 +1479,13 @@
 	return NULL;
 }
 
-static struct rtable *find_route(__be32 saddr, __be32 daddr,
+static struct rtable *find_route(struct net_device *dev,
+				 __be32 saddr, __be32 daddr,
 				 __be16 sport, __be16 dport)
 {
 	struct rtable *rt;
 	struct flowi fl = {
-		.oif = 0,
+		.oif = dev ? dev->ifindex : 0,
 		.nl_u = {
 			 .ip4_u = {
 				   .daddr = daddr,
@@ -1573,36 +1574,40 @@
  *
  * return 0 if active open request is sent, < 0 otherwise.
  */
-int cxgb3i_c3cn_connect(struct s3_conn *c3cn, struct sockaddr_in *usin)
+int cxgb3i_c3cn_connect(struct net_device *dev, struct s3_conn *c3cn,
+			struct sockaddr_in *usin)
 {
 	struct rtable *rt;
-	struct net_device *dev;
 	struct cxgb3i_sdev_data *cdata;
 	struct t3cdev *cdev;
 	__be32 sipv4;
 	int err;
 
+	c3cn_conn_debug("c3cn 0x%p, dev 0x%p.\n", c3cn, dev);
+
 	if (usin->sin_family != AF_INET)
 		return -EAFNOSUPPORT;
 
 	c3cn->daddr.sin_port = usin->sin_port;
 	c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr;
 
-	rt = find_route(c3cn->saddr.sin_addr.s_addr,
+	rt = find_route(dev, c3cn->saddr.sin_addr.s_addr,
 			c3cn->daddr.sin_addr.s_addr,
 			c3cn->saddr.sin_port,
 			c3cn->daddr.sin_port);
 	if (rt == NULL) {
-		c3cn_conn_debug("NO route to 0x%x, port %u.\n",
+		c3cn_conn_debug("NO route to 0x%x, port %u, dev %s.\n",
 				c3cn->daddr.sin_addr.s_addr,
-				ntohs(c3cn->daddr.sin_port));
+				ntohs(c3cn->daddr.sin_port),
+				dev ? dev->name : "any");
 		return -ENETUNREACH;
 	}
 
 	if (rt->rt_flags & (RTCF_MULTICAST | RTCF_BROADCAST)) {
-		c3cn_conn_debug("multi-cast route to 0x%x, port %u.\n",
+		c3cn_conn_debug("multi-cast route to 0x%x, port %u, dev %s.\n",
 				c3cn->daddr.sin_addr.s_addr,
-				ntohs(c3cn->daddr.sin_port));
+				ntohs(c3cn->daddr.sin_port),
+				dev ? dev->name : "any");
 		ip_rt_put(rt);
 		return -ENETUNREACH;
 	}
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.h b/drivers/scsi/cxgb3i/cxgb3i_offload.h
index ebfca96..6a1d86b 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.h
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.h
@@ -169,7 +169,8 @@
 void cxgb3i_sdev_remove(struct t3cdev *);
 
 struct s3_conn *cxgb3i_c3cn_create(void);
-int cxgb3i_c3cn_connect(struct s3_conn *, struct sockaddr_in *);
+int cxgb3i_c3cn_connect(struct net_device *, struct s3_conn *,
+			struct sockaddr_in *);
 void cxgb3i_c3cn_rx_credits(struct s3_conn *, int);
 int cxgb3i_c3cn_send_pdus(struct s3_conn *, struct sk_buff *);
 void cxgb3i_c3cn_release(struct s3_conn *);
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 43b8c51..fd0544f 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -561,6 +561,12 @@
 	struct rdac_dh_data *h = get_rdac_data(sdev);
 	switch (sense_hdr->sense_key) {
 	case NOT_READY:
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01)
+			/* LUN Not Ready - Logical Unit Not Ready and is in
+			* the process of becoming ready
+			* Just retry.
+			*/
+			return ADD_TO_MLQUEUE;
 		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x81)
 			/* LUN Not Ready - Storage firmware incompatible
 			 * Manual code synchonisation required.
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 03e1926..e606b48 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -54,7 +54,6 @@
 /* fcoe host list */
 LIST_HEAD(fcoe_hostlist);
 DEFINE_RWLOCK(fcoe_hostlist_lock);
-DEFINE_TIMER(fcoe_timer, NULL, 0, 0);
 DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu);
 
 /* Function Prototypes */
@@ -71,7 +70,7 @@
 static int fcoe_hostlist_add(const struct fc_lport *);
 static int fcoe_hostlist_remove(const struct fc_lport *);
 
-static int fcoe_check_wait_queue(struct fc_lport *);
+static void fcoe_check_wait_queue(struct fc_lport *, struct sk_buff *);
 static int fcoe_device_notification(struct notifier_block *, ulong, void *);
 static void fcoe_dev_setup(void);
 static void fcoe_dev_cleanup(void);
@@ -146,6 +145,7 @@
 	lp->link_up = 0;
 	lp->qfull = 0;
 	lp->max_retry_count = 3;
+	lp->max_rport_retry_count = 3;
 	lp->e_d_tov = 2 * 1000;	/* FC-FS default */
 	lp->r_a_tov = 2 * 2 * 1000;
 	lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
@@ -167,6 +167,18 @@
 }
 
 /**
+ * fcoe_queue_timer() - fcoe queue timer
+ * @lp: the fc_lport pointer
+ *
+ * Calls fcoe_check_wait_queue on timeout
+ *
+ */
+static void fcoe_queue_timer(ulong lp)
+{
+	fcoe_check_wait_queue((struct fc_lport *)lp, NULL);
+}
+
+/**
  * fcoe_netdev_config() - Set up netdev for SW FCoE
  * @lp : ptr to the fc_lport
  * @netdev : ptr to the associated netdevice struct
@@ -236,6 +248,7 @@
 	}
 	skb_queue_head_init(&fc->fcoe_pending_queue);
 	fc->fcoe_pending_queue_active = 0;
+	setup_timer(&fc->timer, fcoe_queue_timer, (unsigned long)lp);
 
 	/* setup Source Mac Address */
 	memcpy(fc->ctlr.ctl_src_addr, fc->real_dev->dev_addr,
@@ -386,6 +399,9 @@
 	/* Free existing skbs */
 	fcoe_clean_pending_queue(lp);
 
+	/* Stop the timer */
+	del_timer_sync(&fc->timer);
+
 	/* Free memory used by statistical counters */
 	fc_lport_free_stats(lp);
 
@@ -988,7 +1004,7 @@
  */
 int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 {
-	int wlen, rc = 0;
+	int wlen;
 	u32 crc;
 	struct ethhdr *eh;
 	struct fcoe_crc_eof *cp;
@@ -1021,8 +1037,7 @@
 	sof = fr_sof(fp);
 	eof = fr_eof(fp);
 
-	elen = (fc->real_dev->priv_flags & IFF_802_1Q_VLAN) ?
-		sizeof(struct vlan_ethhdr) : sizeof(struct ethhdr);
+	elen = sizeof(struct ethhdr);
 	hlen = sizeof(struct fcoe_hdr);
 	tlen = sizeof(struct fcoe_crc_eof);
 	wlen = (skb->len - tlen + sizeof(crc)) / FCOE_WORD_TO_BYTE;
@@ -1107,18 +1122,9 @@
 	/* send down to lld */
 	fr_dev(fp) = lp;
 	if (fc->fcoe_pending_queue.qlen)
-		rc = fcoe_check_wait_queue(lp);
-
-	if (rc == 0)
-		rc = fcoe_start_io(skb);
-
-	if (rc) {
-		spin_lock_bh(&fc->fcoe_pending_queue.lock);
-		__skb_queue_tail(&fc->fcoe_pending_queue, skb);
-		spin_unlock_bh(&fc->fcoe_pending_queue.lock);
-		if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
-			lp->qfull = 1;
-	}
+		fcoe_check_wait_queue(lp, skb);
+	else if (fcoe_start_io(skb))
+		fcoe_check_wait_queue(lp, skb);
 
 	return 0;
 }
@@ -1268,32 +1274,6 @@
 }
 
 /**
- * fcoe_watchdog() - fcoe timer callback
- * @vp:
- *
- * This checks the pending queue length for fcoe and set lport qfull
- * if the FCOE_MAX_QUEUE_DEPTH is reached. This is done for all fc_lport on the
- * fcoe_hostlist.
- *
- * Returns: 0 for success
- */
-void fcoe_watchdog(ulong vp)
-{
-	struct fcoe_softc *fc;
-
-	read_lock(&fcoe_hostlist_lock);
-	list_for_each_entry(fc, &fcoe_hostlist, list) {
-		if (fc->ctlr.lp)
-			fcoe_check_wait_queue(fc->ctlr.lp);
-	}
-	read_unlock(&fcoe_hostlist_lock);
-
-	fcoe_timer.expires = jiffies + (1 * HZ);
-	add_timer(&fcoe_timer);
-}
-
-
-/**
  * fcoe_check_wait_queue() - attempt to clear the transmit backlog
  * @lp: the fc_lport
  *
@@ -1305,16 +1285,17 @@
  * The wait_queue is used when the skb transmit fails. skb will go
  * in the wait_queue which will be emptied by the timer function or
  * by the next skb transmit.
- *
- * Returns: 0 for success
  */
-static int fcoe_check_wait_queue(struct fc_lport *lp)
+static void fcoe_check_wait_queue(struct fc_lport *lp, struct sk_buff *skb)
 {
 	struct fcoe_softc *fc = lport_priv(lp);
-	struct sk_buff *skb;
-	int rc = -1;
+	int rc;
 
 	spin_lock_bh(&fc->fcoe_pending_queue.lock);
+
+	if (skb)
+		__skb_queue_tail(&fc->fcoe_pending_queue, skb);
+
 	if (fc->fcoe_pending_queue_active)
 		goto out;
 	fc->fcoe_pending_queue_active = 1;
@@ -1340,23 +1321,26 @@
 
 	if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH)
 		lp->qfull = 0;
+	if (fc->fcoe_pending_queue.qlen && !timer_pending(&fc->timer))
+		mod_timer(&fc->timer, jiffies + 2);
 	fc->fcoe_pending_queue_active = 0;
-	rc = fc->fcoe_pending_queue.qlen;
 out:
+	if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
+		lp->qfull = 1;
 	spin_unlock_bh(&fc->fcoe_pending_queue.lock);
-	return rc;
+	return;
 }
 
 /**
  * fcoe_dev_setup() - setup link change notification interface
  */
-static void fcoe_dev_setup()
+static void fcoe_dev_setup(void)
 {
 	register_netdevice_notifier(&fcoe_notifier);
 }
 
 /**
- * fcoe_dev_setup() - cleanup link change notification interface
+ * fcoe_dev_cleanup() - cleanup link change notification interface
  */
 static void fcoe_dev_cleanup(void)
 {
@@ -1815,10 +1799,6 @@
 	/* Setup link change notification */
 	fcoe_dev_setup();
 
-	setup_timer(&fcoe_timer, fcoe_watchdog, 0);
-
-	mod_timer(&fcoe_timer, jiffies + (10 * HZ));
-
 	fcoe_if_init();
 
 	return 0;
@@ -1844,9 +1824,6 @@
 
 	fcoe_dev_cleanup();
 
-	/* Stop the timer */
-	del_timer_sync(&fcoe_timer);
-
 	/* releases the associated fcoe hosts */
 	list_for_each_entry_safe(fc, tmp, &fcoe_hostlist, list)
 		fcoe_if_destroy(fc->real_dev);
diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h
index 917aae8..a1eb8c1 100644
--- a/drivers/scsi/fcoe/fcoe.h
+++ b/drivers/scsi/fcoe/fcoe.h
@@ -61,6 +61,7 @@
 	struct packet_type  fip_packet_type;
 	struct sk_buff_head fcoe_pending_queue;
 	u8	fcoe_pending_queue_active;
+	struct timer_list timer;		/* queue timer */
 	struct fcoe_ctlr ctlr;
 };
 
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 62ba0f3..9294118 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -213,7 +213,7 @@
 	sol->desc.size.fd_size = htons(fcoe_size);
 
 	skb_put(skb, sizeof(*sol));
-	skb->protocol = htons(ETH_P_802_3);
+	skb->protocol = htons(ETH_P_FIP);
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	fip->send(fip, skb);
@@ -365,7 +365,7 @@
 	}
 
 	skb_put(skb, len);
-	skb->protocol = htons(ETH_P_802_3);
+	skb->protocol = htons(ETH_P_FIP);
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	fip->send(fip, skb);
@@ -424,7 +424,7 @@
 	if (dtype != ELS_FLOGI)
 		memcpy(mac->fd_mac, fip->data_src_addr, ETH_ALEN);
 
-	skb->protocol = htons(ETH_P_802_3);
+	skb->protocol = htons(ETH_P_FIP);
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	return 0;
@@ -447,14 +447,10 @@
 	u16 old_xid;
 	u8 op;
 
-	if (fip->state == FIP_ST_NON_FIP)
-		return 0;
-
 	fh = (struct fc_frame_header *)skb->data;
 	op = *(u8 *)(fh + 1);
 
-	switch (op) {
-	case ELS_FLOGI:
+	if (op == ELS_FLOGI) {
 		old_xid = fip->flogi_oxid;
 		fip->flogi_oxid = ntohs(fh->fh_ox_id);
 		if (fip->state == FIP_ST_AUTO) {
@@ -466,6 +462,15 @@
 			fip->map_dest = 1;
 			return 0;
 		}
+		if (fip->state == FIP_ST_NON_FIP)
+			fip->map_dest = 1;
+	}
+
+	if (fip->state == FIP_ST_NON_FIP)
+		return 0;
+
+	switch (op) {
+	case ELS_FLOGI:
 		op = FIP_DT_FLOGI;
 		break;
 	case ELS_FDISC:
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 32ef6b8..a840728 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -680,6 +680,7 @@
 	}
 
 	lp->max_retry_count = fnic->config.flogi_retries;
+	lp->max_rport_retry_count = fnic->config.plogi_retries;
 	lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
 			      FCP_SPPF_CONF_COMPL);
 	if (fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR)
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index 59349a3..1258da3 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -152,6 +152,7 @@
                          struct Scsi_Host *host, gdth_ha_str *ha)
 {
     int size = 0,len = 0;
+    int hlen;
     off_t begin = 0,pos = 0;
     int id, i, j, k, sec, flag;
     int no_mdrv = 0, drv_no, is_mirr;
@@ -192,11 +193,11 @@
     if (reserve_list[0] == 0xff)
         strcpy(hrec, "--");
     else {
-        sprintf(hrec, "%d", reserve_list[0]);
+        hlen = sprintf(hrec, "%d", reserve_list[0]);
         for (i = 1;  i < MAX_RES_ARGS; i++) {
             if (reserve_list[i] == 0xff) 
                 break;
-            sprintf(hrec,"%s,%d", hrec, reserve_list[i]);
+            hlen += snprintf(hrec + hlen , 161 - hlen, ",%d", reserve_list[i]);
         }
     }
     size = sprintf(buffer+len,
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index ea4abee..b4b805e 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -110,7 +110,7 @@
 	{ IBMVFC_FABRIC_MAPPED, IBMVFC_XPORT_DEAD, DID_ERROR, 0, 1, "transport dead" },
 	{ IBMVFC_FABRIC_MAPPED, IBMVFC_CONFIG_ERROR, DID_ERROR, 1, 1, "configuration error" },
 	{ IBMVFC_FABRIC_MAPPED, IBMVFC_NAME_SERVER_FAIL, DID_ERROR, 1, 1, "name server failure" },
-	{ IBMVFC_FABRIC_MAPPED, IBMVFC_LINK_HALTED, DID_REQUEUE, 0, 0, "link halted" },
+	{ IBMVFC_FABRIC_MAPPED, IBMVFC_LINK_HALTED, DID_REQUEUE, 1, 0, "link halted" },
 	{ IBMVFC_FABRIC_MAPPED, IBMVFC_XPORT_GENERAL, DID_OK, 1, 0, "general transport error" },
 
 	{ IBMVFC_VIOS_FAILURE, IBMVFC_CRQ_FAILURE, DID_REQUEUE, 1, 1, "CRQ failure" },
@@ -143,6 +143,7 @@
 static void ibmvfc_tgt_send_prli(struct ibmvfc_target *);
 static void ibmvfc_tgt_send_plogi(struct ibmvfc_target *);
 static void ibmvfc_tgt_query_target(struct ibmvfc_target *);
+static void ibmvfc_npiv_logout(struct ibmvfc_host *);
 
 static const char *unknown_error = "unknown error";
 
@@ -275,7 +276,7 @@
 	int fc_rsp_len = rsp->fcp_rsp_len;
 
 	if ((rsp->flags & FCP_RSP_LEN_VALID) &&
-	    ((!fc_rsp_len && fc_rsp_len != 4 && fc_rsp_len != 8) ||
+	    ((fc_rsp_len && fc_rsp_len != 4 && fc_rsp_len != 8) ||
 	     rsp->data.info.rsp_code))
 		return DID_ERROR << 16;
 
@@ -431,6 +432,8 @@
 	case IBMVFC_TGT_ACTION_DEL_RPORT:
 		break;
 	default:
+		if (action == IBMVFC_TGT_ACTION_DEL_RPORT)
+			tgt->add_rport = 0;
 		tgt->action = action;
 		break;
 	}
@@ -475,6 +478,10 @@
 		if (vhost->action == IBMVFC_HOST_ACTION_INIT_WAIT)
 			vhost->action = action;
 		break;
+	case IBMVFC_HOST_ACTION_LOGO_WAIT:
+		if (vhost->action == IBMVFC_HOST_ACTION_LOGO)
+			vhost->action = action;
+		break;
 	case IBMVFC_HOST_ACTION_INIT_WAIT:
 		if (vhost->action == IBMVFC_HOST_ACTION_INIT)
 			vhost->action = action;
@@ -483,7 +490,7 @@
 		switch (vhost->action) {
 		case IBMVFC_HOST_ACTION_INIT_WAIT:
 		case IBMVFC_HOST_ACTION_NONE:
-		case IBMVFC_HOST_ACTION_TGT_ADD:
+		case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
 			vhost->action = action;
 			break;
 		default:
@@ -494,11 +501,11 @@
 		if (vhost->action == IBMVFC_HOST_ACTION_ALLOC_TGTS)
 			vhost->action = action;
 		break;
+	case IBMVFC_HOST_ACTION_LOGO:
 	case IBMVFC_HOST_ACTION_INIT:
 	case IBMVFC_HOST_ACTION_TGT_DEL:
 	case IBMVFC_HOST_ACTION_QUERY_TGTS:
 	case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
-	case IBMVFC_HOST_ACTION_TGT_ADD:
 	case IBMVFC_HOST_ACTION_NONE:
 	default:
 		vhost->action = action;
@@ -576,7 +583,7 @@
 		}
 
 		list_for_each_entry(tgt, &vhost->targets, queue)
-			tgt->need_login = 1;
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		scsi_block_requests(vhost->host);
 		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
 		vhost->job_step = ibmvfc_npiv_login;
@@ -646,6 +653,7 @@
 	} while (rc == H_BUSY || H_IS_LONG_BUSY(rc));
 
 	vhost->state = IBMVFC_NO_CRQ;
+	vhost->logged_in = 0;
 	dma_unmap_single(vhost->dev, crq->msg_token, PAGE_SIZE, DMA_BIDIRECTIONAL);
 	free_page((unsigned long)crq->msgs);
 }
@@ -692,6 +700,7 @@
 	} while (rc == H_BUSY || H_IS_LONG_BUSY(rc));
 
 	vhost->state = IBMVFC_NO_CRQ;
+	vhost->logged_in = 0;
 	ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
 
 	/* Clean out the queue */
@@ -807,10 +816,10 @@
 }
 
 /**
- * __ibmvfc_reset_host - Reset the connection to the server (no locking)
+ * ibmvfc_hard_reset_host - Reset the connection to the server by breaking the CRQ
  * @vhost:	struct ibmvfc host to reset
  **/
-static void __ibmvfc_reset_host(struct ibmvfc_host *vhost)
+static void ibmvfc_hard_reset_host(struct ibmvfc_host *vhost)
 {
 	int rc;
 
@@ -826,9 +835,25 @@
 }
 
 /**
- * ibmvfc_reset_host - Reset the connection to the server
+ * __ibmvfc_reset_host - Reset the connection to the server (no locking)
  * @vhost:	struct ibmvfc host to reset
  **/
+static void __ibmvfc_reset_host(struct ibmvfc_host *vhost)
+{
+	if (vhost->logged_in && vhost->action != IBMVFC_HOST_ACTION_LOGO_WAIT &&
+	    !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
+		scsi_block_requests(vhost->host);
+		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_LOGO);
+		vhost->job_step = ibmvfc_npiv_logout;
+		wake_up(&vhost->work_wait_q);
+	} else
+		ibmvfc_hard_reset_host(vhost);
+}
+
+/**
+ * ibmvfc_reset_host - Reset the connection to the server
+ * @vhost:	ibmvfc host struct
+ **/
 static void ibmvfc_reset_host(struct ibmvfc_host *vhost)
 {
 	unsigned long flags;
@@ -842,9 +867,13 @@
  * ibmvfc_retry_host_init - Retry host initialization if allowed
  * @vhost:	ibmvfc host struct
  *
+ * Returns: 1 if init will be retried / 0 if not
+ *
  **/
-static void ibmvfc_retry_host_init(struct ibmvfc_host *vhost)
+static int ibmvfc_retry_host_init(struct ibmvfc_host *vhost)
 {
+	int retry = 0;
+
 	if (vhost->action == IBMVFC_HOST_ACTION_INIT_WAIT) {
 		vhost->delay_init = 1;
 		if (++vhost->init_retries > IBMVFC_MAX_HOST_INIT_RETRIES) {
@@ -853,11 +882,14 @@
 			ibmvfc_link_down(vhost, IBMVFC_HOST_OFFLINE);
 		} else if (vhost->init_retries == IBMVFC_MAX_HOST_INIT_RETRIES)
 			__ibmvfc_reset_host(vhost);
-		else
+		else {
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
+			retry = 1;
+		}
 	}
 
 	wake_up(&vhost->work_wait_q);
+	return retry;
 }
 
 /**
@@ -1137,8 +1169,9 @@
 	login_info->partition_num = vhost->partition_number;
 	login_info->vfc_frame_version = 1;
 	login_info->fcp_version = 3;
+	login_info->flags = IBMVFC_FLUSH_ON_HALT;
 	if (vhost->client_migrated)
-		login_info->flags = IBMVFC_CLIENT_MIGRATED;
+		login_info->flags |= IBMVFC_CLIENT_MIGRATED;
 
 	login_info->max_cmds = max_requests + IBMVFC_NUM_INTERNAL_REQ;
 	login_info->capabilities = IBMVFC_CAN_MIGRATE;
@@ -1452,6 +1485,27 @@
 }
 
 /**
+ * ibmvfc_relogin - Log back into the specified device
+ * @sdev:	scsi device struct
+ *
+ **/
+static void ibmvfc_relogin(struct scsi_device *sdev)
+{
+	struct ibmvfc_host *vhost = shost_priv(sdev->host);
+	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+	struct ibmvfc_target *tgt;
+
+	list_for_each_entry(tgt, &vhost->targets, queue) {
+		if (rport == tgt->rport) {
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+			break;
+		}
+	}
+
+	ibmvfc_reinit_host(vhost);
+}
+
+/**
  * ibmvfc_scsi_done - Handle responses from commands
  * @evt:	ibmvfc event to be handled
  *
@@ -1483,7 +1537,7 @@
 			if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len && rsp_len <= 8)
 				memcpy(cmnd->sense_buffer, rsp->data.sense + rsp_len, sense_len);
 			if ((vfc_cmd->status & IBMVFC_VIOS_FAILURE) && (vfc_cmd->error == IBMVFC_PLOGI_REQUIRED))
-				ibmvfc_reinit_host(evt->vhost);
+				ibmvfc_relogin(cmnd->device);
 
 			if (!cmnd->result && (!scsi_get_resid(cmnd) || (rsp->flags & FCP_RESID_OVER)))
 				cmnd->result = (DID_ERROR << 16);
@@ -2148,13 +2202,31 @@
 				struct ibmvfc_host *vhost)
 {
 	const char *desc = ibmvfc_get_ae_desc(crq->event);
+	struct ibmvfc_target *tgt;
 
 	ibmvfc_log(vhost, 3, "%s event received. scsi_id: %llx, wwpn: %llx,"
 		   " node_name: %llx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
 
 	switch (crq->event) {
-	case IBMVFC_AE_LINK_UP:
 	case IBMVFC_AE_RESUME:
+		switch (crq->link_state) {
+		case IBMVFC_AE_LS_LINK_DOWN:
+			ibmvfc_link_down(vhost, IBMVFC_LINK_DOWN);
+			break;
+		case IBMVFC_AE_LS_LINK_DEAD:
+			ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+			break;
+		case IBMVFC_AE_LS_LINK_UP:
+		case IBMVFC_AE_LS_LINK_BOUNCED:
+		default:
+			vhost->events_to_log |= IBMVFC_AE_LINKUP;
+			vhost->delay_init = 1;
+			__ibmvfc_reset_host(vhost);
+			break;
+		};
+
+		break;
+	case IBMVFC_AE_LINK_UP:
 		vhost->events_to_log |= IBMVFC_AE_LINKUP;
 		vhost->delay_init = 1;
 		__ibmvfc_reset_host(vhost);
@@ -2168,9 +2240,23 @@
 	case IBMVFC_AE_SCN_NPORT:
 	case IBMVFC_AE_SCN_GROUP:
 		vhost->events_to_log |= IBMVFC_AE_RSCN;
+		ibmvfc_reinit_host(vhost);
+		break;
 	case IBMVFC_AE_ELS_LOGO:
 	case IBMVFC_AE_ELS_PRLO:
 	case IBMVFC_AE_ELS_PLOGI:
+		list_for_each_entry(tgt, &vhost->targets, queue) {
+			if (!crq->scsi_id && !crq->wwpn && !crq->node_name)
+				break;
+			if (crq->scsi_id && tgt->scsi_id != crq->scsi_id)
+				continue;
+			if (crq->wwpn && tgt->ids.port_name != crq->wwpn)
+				continue;
+			if (crq->node_name && tgt->ids.node_name != crq->node_name)
+				continue;
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+		}
+
 		ibmvfc_reinit_host(vhost);
 		break;
 	case IBMVFC_AE_LINK_DOWN:
@@ -2222,6 +2308,7 @@
 		return;
 	case IBMVFC_CRQ_XPORT_EVENT:
 		vhost->state = IBMVFC_NO_CRQ;
+		vhost->logged_in = 0;
 		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
 		if (crq->format == IBMVFC_PARTITION_MIGRATED) {
 			/* We need to re-setup the interpartition connection */
@@ -2299,7 +2386,7 @@
 		done = 1;
 	}
 
-	if (vhost->state != IBMVFC_NO_CRQ && vhost->action == IBMVFC_HOST_ACTION_NONE)
+	if (vhost->scan_complete)
 		done = 1;
 	spin_unlock_irqrestore(shost->host_lock, flags);
 	return done;
@@ -2434,14 +2521,6 @@
 			vhost->login_buf->resp.partition_name);
 }
 
-static struct device_attribute ibmvfc_host_partition_name = {
-	.attr = {
-		.name = "partition_name",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_partition_name,
-};
-
 static ssize_t ibmvfc_show_host_device_name(struct device *dev,
 					    struct device_attribute *attr, char *buf)
 {
@@ -2452,14 +2531,6 @@
 			vhost->login_buf->resp.device_name);
 }
 
-static struct device_attribute ibmvfc_host_device_name = {
-	.attr = {
-		.name = "device_name",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_device_name,
-};
-
 static ssize_t ibmvfc_show_host_loc_code(struct device *dev,
 					 struct device_attribute *attr, char *buf)
 {
@@ -2470,14 +2541,6 @@
 			vhost->login_buf->resp.port_loc_code);
 }
 
-static struct device_attribute ibmvfc_host_loc_code = {
-	.attr = {
-		.name = "port_loc_code",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_loc_code,
-};
-
 static ssize_t ibmvfc_show_host_drc_name(struct device *dev,
 					 struct device_attribute *attr, char *buf)
 {
@@ -2488,14 +2551,6 @@
 			vhost->login_buf->resp.drc_name);
 }
 
-static struct device_attribute ibmvfc_host_drc_name = {
-	.attr = {
-		.name = "drc_name",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_drc_name,
-};
-
 static ssize_t ibmvfc_show_host_npiv_version(struct device *dev,
 					     struct device_attribute *attr, char *buf)
 {
@@ -2504,13 +2559,13 @@
 	return snprintf(buf, PAGE_SIZE, "%d\n", vhost->login_buf->resp.version);
 }
 
-static struct device_attribute ibmvfc_host_npiv_version = {
-	.attr = {
-		.name = "npiv_version",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_npiv_version,
-};
+static ssize_t ibmvfc_show_host_capabilities(struct device *dev,
+					     struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ibmvfc_host *vhost = shost_priv(shost);
+	return snprintf(buf, PAGE_SIZE, "%llx\n", vhost->login_buf->resp.capabilities);
+}
 
 /**
  * ibmvfc_show_log_level - Show the adapter's error logging level
@@ -2556,14 +2611,14 @@
 	return strlen(buf);
 }
 
-static struct device_attribute ibmvfc_log_level_attr = {
-	.attr = {
-		.name =		"log_level",
-		.mode =		S_IRUGO | S_IWUSR,
-	},
-	.show = ibmvfc_show_log_level,
-	.store = ibmvfc_store_log_level
-};
+static DEVICE_ATTR(partition_name, S_IRUGO, ibmvfc_show_host_partition_name, NULL);
+static DEVICE_ATTR(device_name, S_IRUGO, ibmvfc_show_host_device_name, NULL);
+static DEVICE_ATTR(port_loc_code, S_IRUGO, ibmvfc_show_host_loc_code, NULL);
+static DEVICE_ATTR(drc_name, S_IRUGO, ibmvfc_show_host_drc_name, NULL);
+static DEVICE_ATTR(npiv_version, S_IRUGO, ibmvfc_show_host_npiv_version, NULL);
+static DEVICE_ATTR(capabilities, S_IRUGO, ibmvfc_show_host_capabilities, NULL);
+static DEVICE_ATTR(log_level, S_IRUGO | S_IWUSR,
+		   ibmvfc_show_log_level, ibmvfc_store_log_level);
 
 #ifdef CONFIG_SCSI_IBMVFC_TRACE
 /**
@@ -2612,12 +2667,13 @@
 #endif
 
 static struct device_attribute *ibmvfc_attrs[] = {
-	&ibmvfc_host_partition_name,
-	&ibmvfc_host_device_name,
-	&ibmvfc_host_loc_code,
-	&ibmvfc_host_drc_name,
-	&ibmvfc_host_npiv_version,
-	&ibmvfc_log_level_attr,
+	&dev_attr_partition_name,
+	&dev_attr_device_name,
+	&dev_attr_port_loc_code,
+	&dev_attr_drc_name,
+	&dev_attr_npiv_version,
+	&dev_attr_capabilities,
+	&dev_attr_log_level,
 	NULL
 };
 
@@ -2774,15 +2830,19 @@
  * @tgt:		ibmvfc target struct
  * @job_step:	initialization job step
  *
+ * Returns: 1 if step will be retried / 0 if not
+ *
  **/
-static void ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt,
+static int ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt,
 				  void (*job_step) (struct ibmvfc_target *))
 {
 	if (++tgt->init_retries > IBMVFC_MAX_TGT_INIT_RETRIES) {
 		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		wake_up(&tgt->vhost->work_wait_q);
+		return 0;
 	} else
 		ibmvfc_init_tgt(tgt, job_step);
+	return 1;
 }
 
 /* Defined in FC-LS */
@@ -2831,7 +2891,7 @@
 	struct ibmvfc_process_login *rsp = &evt->xfer_iu->prli;
 	struct ibmvfc_prli_svc_parms *parms = &rsp->parms;
 	u32 status = rsp->common.status;
-	int index;
+	int index, level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	vhost->discovery_threads--;
 	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
@@ -2850,7 +2910,7 @@
 						tgt->ids.roles |= FC_PORT_ROLE_FCP_TARGET;
 					if (parms->service_parms & IBMVFC_PRLI_INITIATOR_FUNC)
 						tgt->ids.roles |= FC_PORT_ROLE_FCP_INITIATOR;
-					ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_ADD_RPORT);
+					tgt->add_rport = 1;
 				} else
 					ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 			} else if (prli_rsp[index].retry)
@@ -2867,13 +2927,14 @@
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		tgt_err(tgt, "Process Login failed: %s (%x:%x) rc=0x%02X\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error),
-			rsp->status, rsp->error, status);
 		if (ibmvfc_retry_cmd(rsp->status, rsp->error))
-			ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli);
+			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli);
 		else
 			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+		tgt_log(tgt, level, "Process Login failed: %s (%x:%x) rc=0x%02X\n",
+			ibmvfc_get_cmd_error(rsp->status, rsp->error),
+			rsp->status, rsp->error, status);
 		break;
 	};
 
@@ -2932,6 +2993,7 @@
 	struct ibmvfc_host *vhost = evt->vhost;
 	struct ibmvfc_port_login *rsp = &evt->xfer_iu->plogi;
 	u32 status = rsp->common.status;
+	int level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	vhost->discovery_threads--;
 	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
@@ -2960,15 +3022,15 @@
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		tgt_err(tgt, "Port Login failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
+		if (ibmvfc_retry_cmd(rsp->status, rsp->error))
+			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
+		else
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+		tgt_log(tgt, level, "Port Login failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
 			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
 			ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
 			ibmvfc_get_ls_explain(rsp->fc_explain), rsp->fc_explain, status);
-
-		if (ibmvfc_retry_cmd(rsp->status, rsp->error))
-			ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
-		else
-			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		break;
 	};
 
@@ -3129,13 +3191,13 @@
 	case IBMVFC_MAD_SUCCESS:
 		tgt_dbg(tgt, "ADISC succeeded\n");
 		if (ibmvfc_adisc_needs_plogi(mad, tgt))
-			tgt->need_login = 1;
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		break;
 	case IBMVFC_MAD_DRIVER_FAILED:
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		tgt->need_login = 1;
+		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		fc_reason = (mad->fc_iu.response[1] & 0x00ff0000) >> 16;
 		fc_explain = (mad->fc_iu.response[1] & 0x0000ff00) >> 8;
 		tgt_info(tgt, "ADISC failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
@@ -3322,6 +3384,7 @@
 	struct ibmvfc_host *vhost = evt->vhost;
 	struct ibmvfc_query_tgt *rsp = &evt->xfer_iu->query_tgt;
 	u32 status = rsp->common.status;
+	int level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	vhost->discovery_threads--;
 	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
@@ -3341,19 +3404,19 @@
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		tgt_err(tgt, "Query Target failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
-			ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
-			ibmvfc_get_gs_explain(rsp->fc_explain), rsp->fc_explain, status);
-
 		if ((rsp->status & IBMVFC_FABRIC_MAPPED) == IBMVFC_FABRIC_MAPPED &&
 		    rsp->error == IBMVFC_UNABLE_TO_PERFORM_REQ &&
 		    rsp->fc_explain == IBMVFC_PORT_NAME_NOT_REG)
 			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		else if (ibmvfc_retry_cmd(rsp->status, rsp->error))
-			ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_query_target);
+			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_query_target);
 		else
 			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+		tgt_log(tgt, level, "Query Target failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
+			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
+			ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
+			ibmvfc_get_gs_explain(rsp->fc_explain), rsp->fc_explain, status);
 		break;
 	};
 
@@ -3420,7 +3483,7 @@
 	}
 	spin_unlock_irqrestore(vhost->host->host_lock, flags);
 
-	tgt = mempool_alloc(vhost->tgt_pool, GFP_KERNEL);
+	tgt = mempool_alloc(vhost->tgt_pool, GFP_NOIO);
 	if (!tgt) {
 		dev_err(vhost->dev, "Target allocation failure for scsi id %08llx\n",
 			scsi_id);
@@ -3472,6 +3535,7 @@
 	struct ibmvfc_host *vhost = evt->vhost;
 	struct ibmvfc_discover_targets *rsp = &evt->xfer_iu->discover_targets;
 	u32 mad_status = rsp->common.status;
+	int level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	switch (mad_status) {
 	case IBMVFC_MAD_SUCCESS:
@@ -3480,9 +3544,9 @@
 		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_ALLOC_TGTS);
 		break;
 	case IBMVFC_MAD_FAILED:
-		dev_err(vhost->dev, "Discover Targets failed: %s (%x:%x)\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
-		ibmvfc_retry_host_init(vhost);
+		level += ibmvfc_retry_host_init(vhost);
+		ibmvfc_log(vhost, level, "Discover Targets failed: %s (%x:%x)\n",
+			   ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
 		break;
 	case IBMVFC_MAD_DRIVER_FAILED:
 		break;
@@ -3534,18 +3598,19 @@
 	u32 mad_status = evt->xfer_iu->npiv_login.common.status;
 	struct ibmvfc_npiv_login_resp *rsp = &vhost->login_buf->resp;
 	unsigned int npiv_max_sectors;
+	int level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	switch (mad_status) {
 	case IBMVFC_MAD_SUCCESS:
 		ibmvfc_free_event(evt);
 		break;
 	case IBMVFC_MAD_FAILED:
-		dev_err(vhost->dev, "NPIV Login failed: %s (%x:%x)\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
 		if (ibmvfc_retry_cmd(rsp->status, rsp->error))
-			ibmvfc_retry_host_init(vhost);
+			level += ibmvfc_retry_host_init(vhost);
 		else
 			ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+		ibmvfc_log(vhost, level, "NPIV Login failed: %s (%x:%x)\n",
+			   ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
 		ibmvfc_free_event(evt);
 		return;
 	case IBMVFC_MAD_CRQ_ERROR:
@@ -3578,6 +3643,7 @@
 		return;
 	}
 
+	vhost->logged_in = 1;
 	npiv_max_sectors = min((uint)(rsp->max_dma_len >> 9), IBMVFC_MAX_SECTORS);
 	dev_info(vhost->dev, "Host partition: %s, device: %s %s %s max sectors %u\n",
 		 rsp->partition_name, rsp->device_name, rsp->port_loc_code,
@@ -3636,6 +3702,65 @@
 };
 
 /**
+ * ibmvfc_npiv_logout_done - Completion handler for NPIV Logout
+ * @vhost:		ibmvfc host struct
+ *
+ **/
+static void ibmvfc_npiv_logout_done(struct ibmvfc_event *evt)
+{
+	struct ibmvfc_host *vhost = evt->vhost;
+	u32 mad_status = evt->xfer_iu->npiv_logout.common.status;
+
+	ibmvfc_free_event(evt);
+
+	switch (mad_status) {
+	case IBMVFC_MAD_SUCCESS:
+		if (list_empty(&vhost->sent) &&
+		    vhost->action == IBMVFC_HOST_ACTION_LOGO_WAIT) {
+			ibmvfc_init_host(vhost, 0);
+			return;
+		}
+		break;
+	case IBMVFC_MAD_FAILED:
+	case IBMVFC_MAD_NOT_SUPPORTED:
+	case IBMVFC_MAD_CRQ_ERROR:
+	case IBMVFC_MAD_DRIVER_FAILED:
+	default:
+		ibmvfc_dbg(vhost, "NPIV Logout failed. 0x%X\n", mad_status);
+		break;
+	}
+
+	ibmvfc_hard_reset_host(vhost);
+}
+
+/**
+ * ibmvfc_npiv_logout - Issue an NPIV Logout
+ * @vhost:		ibmvfc host struct
+ *
+ **/
+static void ibmvfc_npiv_logout(struct ibmvfc_host *vhost)
+{
+	struct ibmvfc_npiv_logout_mad *mad;
+	struct ibmvfc_event *evt;
+
+	evt = ibmvfc_get_event(vhost);
+	ibmvfc_init_event(evt, ibmvfc_npiv_logout_done, IBMVFC_MAD_FORMAT);
+
+	mad = &evt->iu.npiv_logout;
+	memset(mad, 0, sizeof(*mad));
+	mad->common.version = 1;
+	mad->common.opcode = IBMVFC_NPIV_LOGOUT;
+	mad->common.length = sizeof(struct ibmvfc_npiv_logout_mad);
+
+	ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_LOGO_WAIT);
+
+	if (!ibmvfc_send_event(evt, vhost, default_timeout))
+		ibmvfc_dbg(vhost, "Sent NPIV logout\n");
+	else
+		ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+}
+
+/**
  * ibmvfc_dev_init_to_do - Is there target initialization work to do?
  * @vhost:		ibmvfc host struct
  *
@@ -3671,6 +3796,7 @@
 	switch (vhost->action) {
 	case IBMVFC_HOST_ACTION_NONE:
 	case IBMVFC_HOST_ACTION_INIT_WAIT:
+	case IBMVFC_HOST_ACTION_LOGO_WAIT:
 		return 0;
 	case IBMVFC_HOST_ACTION_TGT_INIT:
 	case IBMVFC_HOST_ACTION_QUERY_TGTS:
@@ -3683,9 +3809,9 @@
 			if (tgt->action == IBMVFC_TGT_ACTION_INIT_WAIT)
 				return 0;
 		return 1;
+	case IBMVFC_HOST_ACTION_LOGO:
 	case IBMVFC_HOST_ACTION_INIT:
 	case IBMVFC_HOST_ACTION_ALLOC_TGTS:
-	case IBMVFC_HOST_ACTION_TGT_ADD:
 	case IBMVFC_HOST_ACTION_TGT_DEL:
 	case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
 	case IBMVFC_HOST_ACTION_QUERY:
@@ -3740,25 +3866,26 @@
 static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt)
 {
 	struct ibmvfc_host *vhost = tgt->vhost;
-	struct fc_rport *rport = tgt->rport;
+	struct fc_rport *rport;
 	unsigned long flags;
 
-	if (rport) {
-		tgt_dbg(tgt, "Setting rport roles\n");
-		fc_remote_port_rolechg(rport, tgt->ids.roles);
-		spin_lock_irqsave(vhost->host->host_lock, flags);
-		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
-		spin_unlock_irqrestore(vhost->host->host_lock, flags);
-		return;
-	}
-
 	tgt_dbg(tgt, "Adding rport\n");
 	rport = fc_remote_port_add(vhost->host, 0, &tgt->ids);
 	spin_lock_irqsave(vhost->host->host_lock, flags);
-	tgt->rport = rport;
-	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
+
+	if (rport && tgt->action == IBMVFC_TGT_ACTION_DEL_RPORT) {
+		tgt_dbg(tgt, "Deleting rport\n");
+		list_del(&tgt->queue);
+		spin_unlock_irqrestore(vhost->host->host_lock, flags);
+		fc_remote_port_delete(rport);
+		del_timer_sync(&tgt->timer);
+		kref_put(&tgt->kref, ibmvfc_release_tgt);
+		return;
+	}
+
 	if (rport) {
 		tgt_dbg(tgt, "rport add succeeded\n");
+		tgt->rport = rport;
 		rport->maxframe_size = tgt->service_parms.common.bb_rcv_sz & 0x0fff;
 		rport->supported_classes = 0;
 		tgt->target_id = rport->scsi_target_id;
@@ -3789,8 +3916,12 @@
 	vhost->events_to_log = 0;
 	switch (vhost->action) {
 	case IBMVFC_HOST_ACTION_NONE:
+	case IBMVFC_HOST_ACTION_LOGO_WAIT:
 	case IBMVFC_HOST_ACTION_INIT_WAIT:
 		break;
+	case IBMVFC_HOST_ACTION_LOGO:
+		vhost->job_step(vhost);
+		break;
 	case IBMVFC_HOST_ACTION_INIT:
 		BUG_ON(vhost->state != IBMVFC_INITIALIZING);
 		if (vhost->delay_init) {
@@ -3836,11 +3967,21 @@
 
 		if (vhost->state == IBMVFC_INITIALIZING) {
 			if (vhost->action == IBMVFC_HOST_ACTION_TGT_DEL_FAILED) {
-				ibmvfc_set_host_state(vhost, IBMVFC_ACTIVE);
-				ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_TGT_ADD);
-				vhost->init_retries = 0;
-				spin_unlock_irqrestore(vhost->host->host_lock, flags);
-				scsi_unblock_requests(vhost->host);
+				if (vhost->reinit) {
+					vhost->reinit = 0;
+					scsi_block_requests(vhost->host);
+					ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
+					spin_unlock_irqrestore(vhost->host->host_lock, flags);
+				} else {
+					ibmvfc_set_host_state(vhost, IBMVFC_ACTIVE);
+					ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
+					wake_up(&vhost->init_wait_q);
+					schedule_work(&vhost->rport_add_work_q);
+					vhost->init_retries = 0;
+					spin_unlock_irqrestore(vhost->host->host_lock, flags);
+					scsi_unblock_requests(vhost->host);
+				}
+
 				return;
 			} else {
 				ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
@@ -3871,24 +4012,6 @@
 		if (!ibmvfc_dev_init_to_do(vhost))
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_TGT_DEL_FAILED);
 		break;
-	case IBMVFC_HOST_ACTION_TGT_ADD:
-		list_for_each_entry(tgt, &vhost->targets, queue) {
-			if (tgt->action == IBMVFC_TGT_ACTION_ADD_RPORT) {
-				spin_unlock_irqrestore(vhost->host->host_lock, flags);
-				ibmvfc_tgt_add_rport(tgt);
-				return;
-			}
-		}
-
-		if (vhost->reinit && !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
-			vhost->reinit = 0;
-			scsi_block_requests(vhost->host);
-			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
-		} else {
-			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
-			wake_up(&vhost->init_wait_q);
-		}
-		break;
 	default:
 		break;
 	};
@@ -4118,6 +4241,56 @@
 }
 
 /**
+ * ibmvfc_rport_add_thread - Worker thread for rport adds
+ * @work:	work struct
+ *
+ **/
+static void ibmvfc_rport_add_thread(struct work_struct *work)
+{
+	struct ibmvfc_host *vhost = container_of(work, struct ibmvfc_host,
+						 rport_add_work_q);
+	struct ibmvfc_target *tgt;
+	struct fc_rport *rport;
+	unsigned long flags;
+	int did_work;
+
+	ENTER;
+	spin_lock_irqsave(vhost->host->host_lock, flags);
+	do {
+		did_work = 0;
+		if (vhost->state != IBMVFC_ACTIVE)
+			break;
+
+		list_for_each_entry(tgt, &vhost->targets, queue) {
+			if (tgt->add_rport) {
+				did_work = 1;
+				tgt->add_rport = 0;
+				kref_get(&tgt->kref);
+				rport = tgt->rport;
+				if (!rport) {
+					spin_unlock_irqrestore(vhost->host->host_lock, flags);
+					ibmvfc_tgt_add_rport(tgt);
+				} else if (get_device(&rport->dev)) {
+					spin_unlock_irqrestore(vhost->host->host_lock, flags);
+					tgt_dbg(tgt, "Setting rport roles\n");
+					fc_remote_port_rolechg(rport, tgt->ids.roles);
+					put_device(&rport->dev);
+				}
+
+				kref_put(&tgt->kref, ibmvfc_release_tgt);
+				spin_lock_irqsave(vhost->host->host_lock, flags);
+				break;
+			}
+		}
+	} while(did_work);
+
+	if (vhost->state == IBMVFC_ACTIVE)
+		vhost->scan_complete = 1;
+	spin_unlock_irqrestore(vhost->host->host_lock, flags);
+	LEAVE;
+}
+
+/**
  * ibmvfc_probe - Adapter hot plug add entry point
  * @vdev:	vio device struct
  * @id:	vio device id struct
@@ -4160,6 +4333,7 @@
 	strcpy(vhost->partition_name, "UNKNOWN");
 	init_waitqueue_head(&vhost->work_wait_q);
 	init_waitqueue_head(&vhost->init_wait_q);
+	INIT_WORK(&vhost->rport_add_work_q, ibmvfc_rport_add_thread);
 
 	if ((rc = ibmvfc_alloc_mem(vhost)))
 		goto free_scsi_host;
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index ca1dcf7..c2668d7 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -29,8 +29,8 @@
 #include "viosrp.h"
 
 #define IBMVFC_NAME	"ibmvfc"
-#define IBMVFC_DRIVER_VERSION		"1.0.5"
-#define IBMVFC_DRIVER_DATE		"(March 19, 2009)"
+#define IBMVFC_DRIVER_VERSION		"1.0.6"
+#define IBMVFC_DRIVER_DATE		"(May 28, 2009)"
 
 #define IBMVFC_DEFAULT_TIMEOUT	60
 #define IBMVFC_ADISC_CANCEL_TIMEOUT	45
@@ -57,9 +57,10 @@
  * Ensure we have resources for ERP and initialization:
  * 1 for ERP
  * 1 for initialization
+ * 1 for NPIV Logout
  * 2 for each discovery thread
  */
-#define IBMVFC_NUM_INTERNAL_REQ	(1 + 1 + (disc_threads * 2))
+#define IBMVFC_NUM_INTERNAL_REQ	(1 + 1 + 1 + (disc_threads * 2))
 
 #define IBMVFC_MAD_SUCCESS		0x00
 #define IBMVFC_MAD_NOT_SUPPORTED	0xF1
@@ -127,6 +128,7 @@
 	IBMVFC_IMPLICIT_LOGOUT	= 0x0040,
 	IBMVFC_PASSTHRU		= 0x0200,
 	IBMVFC_TMF_MAD		= 0x0100,
+	IBMVFC_NPIV_LOGOUT	= 0x0800,
 };
 
 struct ibmvfc_mad_common {
@@ -143,6 +145,10 @@
 	struct srp_direct_buf buffer;
 }__attribute__((packed, aligned (8)));
 
+struct ibmvfc_npiv_logout_mad {
+	struct ibmvfc_mad_common common;
+}__attribute__((packed, aligned (8)));
+
 #define IBMVFC_MAX_NAME 256
 
 struct ibmvfc_npiv_login {
@@ -201,7 +207,8 @@
 #define IBMVFC_NATIVE_FC		0x01
 #define IBMVFC_CAN_FLUSH_ON_HALT	0x08
 	u32 reserved;
-	u64 capabilites;
+	u64 capabilities;
+#define IBMVFC_CAN_FLUSH_ON_HALT	0x08
 	u32 max_cmds;
 	u32 scsi_id_sz;
 	u64 max_dma_len;
@@ -541,9 +548,17 @@
 	dma_addr_t msg_token;
 };
 
+enum ibmvfc_ae_link_state {
+	IBMVFC_AE_LS_LINK_UP		= 0x01,
+	IBMVFC_AE_LS_LINK_BOUNCED	= 0x02,
+	IBMVFC_AE_LS_LINK_DOWN		= 0x04,
+	IBMVFC_AE_LS_LINK_DEAD		= 0x08,
+};
+
 struct ibmvfc_async_crq {
 	volatile u8 valid;
-	u8 pad[3];
+	u8 link_state;
+	u8 pad[2];
 	u32 pad2;
 	volatile u64 event;
 	volatile u64 scsi_id;
@@ -561,6 +576,7 @@
 union ibmvfc_iu {
 	struct ibmvfc_mad_common mad_common;
 	struct ibmvfc_npiv_login_mad npiv_login;
+	struct ibmvfc_npiv_logout_mad npiv_logout;
 	struct ibmvfc_discover_targets discover_targets;
 	struct ibmvfc_port_login plogi;
 	struct ibmvfc_process_login prli;
@@ -575,7 +591,6 @@
 	IBMVFC_TGT_ACTION_NONE = 0,
 	IBMVFC_TGT_ACTION_INIT,
 	IBMVFC_TGT_ACTION_INIT_WAIT,
-	IBMVFC_TGT_ACTION_ADD_RPORT,
 	IBMVFC_TGT_ACTION_DEL_RPORT,
 };
 
@@ -588,6 +603,7 @@
 	int target_id;
 	enum ibmvfc_target_action action;
 	int need_login;
+	int add_rport;
 	int init_retries;
 	u32 cancel_key;
 	struct ibmvfc_service_parms service_parms;
@@ -627,6 +643,8 @@
 
 enum ibmvfc_host_action {
 	IBMVFC_HOST_ACTION_NONE = 0,
+	IBMVFC_HOST_ACTION_LOGO,
+	IBMVFC_HOST_ACTION_LOGO_WAIT,
 	IBMVFC_HOST_ACTION_INIT,
 	IBMVFC_HOST_ACTION_INIT_WAIT,
 	IBMVFC_HOST_ACTION_QUERY,
@@ -635,7 +653,6 @@
 	IBMVFC_HOST_ACTION_ALLOC_TGTS,
 	IBMVFC_HOST_ACTION_TGT_INIT,
 	IBMVFC_HOST_ACTION_TGT_DEL_FAILED,
-	IBMVFC_HOST_ACTION_TGT_ADD,
 };
 
 enum ibmvfc_host_state {
@@ -682,6 +699,8 @@
 	int client_migrated;
 	int reinit;
 	int delay_init;
+	int scan_complete;
+	int logged_in;
 	int events_to_log;
 #define IBMVFC_AE_LINKUP	0x0001
 #define IBMVFC_AE_LINKDOWN	0x0002
@@ -692,6 +711,7 @@
 	void (*job_step) (struct ibmvfc_host *);
 	struct task_struct *work_thread;
 	struct tasklet_struct tasklet;
+	struct work_struct rport_add_work_q;
 	wait_queue_head_t init_wait_q;
 	wait_queue_head_t work_wait_q;
 };
@@ -707,6 +727,12 @@
 #define tgt_err(t, fmt, ...)		\
 	dev_err((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
 
+#define tgt_log(t, level, fmt, ...) \
+	do { \
+		if ((t)->vhost->log_level >= level) \
+			tgt_err(t, fmt, ##__VA_ARGS__); \
+	} while (0)
+
 #define ibmvfc_dbg(vhost, ...) \
 	DBG_CMD(dev_info((vhost)->dev, ##__VA_ARGS__))
 
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index c9aa761..11d2602 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -70,6 +70,7 @@
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 #include <asm/firmware.h>
 #include <asm/vio.h>
 #include <asm/firmware.h>
@@ -87,9 +88,15 @@
  */
 static int max_id = 64;
 static int max_channel = 3;
-static int init_timeout = 5;
+static int init_timeout = 300;
+static int login_timeout = 60;
+static int info_timeout = 30;
+static int abort_timeout = 60;
+static int reset_timeout = 60;
 static int max_requests = IBMVSCSI_MAX_REQUESTS_DEFAULT;
 static int max_events = IBMVSCSI_MAX_REQUESTS_DEFAULT + 2;
+static int fast_fail = 1;
+static int client_reserve = 1;
 
 static struct scsi_transport_template *ibmvscsi_transport_template;
 
@@ -110,6 +117,10 @@
 MODULE_PARM_DESC(init_timeout, "Initialization timeout in seconds");
 module_param_named(max_requests, max_requests, int, S_IRUGO);
 MODULE_PARM_DESC(max_requests, "Maximum requests for this adapter");
+module_param_named(fast_fail, fast_fail, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(fast_fail, "Enable fast fail. [Default=1]");
+module_param_named(client_reserve, client_reserve, int, S_IRUGO );
+MODULE_PARM_DESC(client_reserve, "Attempt client managed reserve/release");
 
 /* ------------------------------------------------------------
  * Routines for the event pool and event structs
@@ -781,105 +792,53 @@
 /* ------------------------------------------------------------
  * Routines for driver initialization
  */
-/**
- * adapter_info_rsp: - Handle response to MAD adapter info request
- * @evt_struct:	srp_event_struct with the response
- *
- * Used as a "done" callback by when sending adapter_info. Gets called
- * by ibmvscsi_handle_crq()
-*/
-static void adapter_info_rsp(struct srp_event_struct *evt_struct)
-{
-	struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
-	dma_unmap_single(hostdata->dev,
-			 evt_struct->iu.mad.adapter_info.buffer,
-			 evt_struct->iu.mad.adapter_info.common.length,
-			 DMA_BIDIRECTIONAL);
 
-	if (evt_struct->xfer_iu->mad.adapter_info.common.status) {
-		dev_err(hostdata->dev, "error %d getting adapter info\n",
-			evt_struct->xfer_iu->mad.adapter_info.common.status);
-	} else {
-		dev_info(hostdata->dev, "host srp version: %s, "
-			 "host partition %s (%d), OS %d, max io %u\n",
-			 hostdata->madapter_info.srp_version,
-			 hostdata->madapter_info.partition_name,
-			 hostdata->madapter_info.partition_number,
-			 hostdata->madapter_info.os_type,
-			 hostdata->madapter_info.port_max_txu[0]);
-		
-		if (hostdata->madapter_info.port_max_txu[0]) 
-			hostdata->host->max_sectors = 
-				hostdata->madapter_info.port_max_txu[0] >> 9;
-		
-		if (hostdata->madapter_info.os_type == 3 &&
-		    strcmp(hostdata->madapter_info.srp_version, "1.6a") <= 0) {
-			dev_err(hostdata->dev, "host (Ver. %s) doesn't support large transfers\n",
-				hostdata->madapter_info.srp_version);
-			dev_err(hostdata->dev, "limiting scatterlists to %d\n",
-				MAX_INDIRECT_BUFS);
-			hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
-		}
+/**
+ * map_persist_bufs: - Pre-map persistent data for adapter logins
+ * @hostdata:   ibmvscsi_host_data of host
+ *
+ * Map the capabilities and adapter info DMA buffers to avoid runtime failures.
+ * Return 1 on error, 0 on success.
+ */
+static int map_persist_bufs(struct ibmvscsi_host_data *hostdata)
+{
+
+	hostdata->caps_addr = dma_map_single(hostdata->dev, &hostdata->caps,
+					     sizeof(hostdata->caps), DMA_BIDIRECTIONAL);
+
+	if (dma_mapping_error(hostdata->dev, hostdata->caps_addr)) {
+		dev_err(hostdata->dev, "Unable to map capabilities buffer!\n");
+		return 1;
 	}
+
+	hostdata->adapter_info_addr = dma_map_single(hostdata->dev,
+						     &hostdata->madapter_info,
+						     sizeof(hostdata->madapter_info),
+						     DMA_BIDIRECTIONAL);
+	if (dma_mapping_error(hostdata->dev, hostdata->adapter_info_addr)) {
+		dev_err(hostdata->dev, "Unable to map adapter info buffer!\n");
+		dma_unmap_single(hostdata->dev, hostdata->caps_addr,
+				 sizeof(hostdata->caps), DMA_BIDIRECTIONAL);
+		return 1;
+	}
+
+	return 0;
 }
 
 /**
- * send_mad_adapter_info: - Sends the mad adapter info request
- *      and stores the result so it can be retrieved with
- *      sysfs.  We COULD consider causing a failure if the
- *      returned SRP version doesn't match ours.
- * @hostdata:	ibmvscsi_host_data of host
- * 
- * Returns zero if successful.
-*/
-static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
+ * unmap_persist_bufs: - Unmap persistent data needed for adapter logins
+ * @hostdata:   ibmvscsi_host_data of host
+ *
+ * Unmap the capabilities and adapter info DMA buffers
+ */
+static void unmap_persist_bufs(struct ibmvscsi_host_data *hostdata)
 {
-	struct viosrp_adapter_info *req;
-	struct srp_event_struct *evt_struct;
-	unsigned long flags;
-	dma_addr_t addr;
+	dma_unmap_single(hostdata->dev, hostdata->caps_addr,
+			 sizeof(hostdata->caps), DMA_BIDIRECTIONAL);
 
-	evt_struct = get_event_struct(&hostdata->pool);
-	if (!evt_struct) {
-		dev_err(hostdata->dev,
-			"couldn't allocate an event for ADAPTER_INFO_REQ!\n");
-		return;
-	}
-
-	init_event_struct(evt_struct,
-			  adapter_info_rsp,
-			  VIOSRP_MAD_FORMAT,
-			  init_timeout);
-	
-	req = &evt_struct->iu.mad.adapter_info;
-	memset(req, 0x00, sizeof(*req));
-	
-	req->common.type = VIOSRP_ADAPTER_INFO_TYPE;
-	req->common.length = sizeof(hostdata->madapter_info);
-	req->buffer = addr = dma_map_single(hostdata->dev,
-					    &hostdata->madapter_info,
-					    sizeof(hostdata->madapter_info),
-					    DMA_BIDIRECTIONAL);
-
-	if (dma_mapping_error(hostdata->dev, req->buffer)) {
-		if (!firmware_has_feature(FW_FEATURE_CMO))
-			dev_err(hostdata->dev,
-			        "Unable to map request_buffer for "
-			        "adapter_info!\n");
-		free_event_struct(&hostdata->pool, evt_struct);
-		return;
-	}
-	
-	spin_lock_irqsave(hostdata->host->host_lock, flags);
-	if (ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2)) {
-		dev_err(hostdata->dev, "couldn't send ADAPTER_INFO_REQ!\n");
-		dma_unmap_single(hostdata->dev,
-				 addr,
-				 sizeof(hostdata->madapter_info),
-				 DMA_BIDIRECTIONAL);
-	}
-	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
-};
+	dma_unmap_single(hostdata->dev, hostdata->adapter_info_addr,
+			 sizeof(hostdata->madapter_info), DMA_BIDIRECTIONAL);
+}
 
 /**
  * login_rsp: - Handle response to SRP login request
@@ -909,9 +868,7 @@
 	}
 
 	dev_info(hostdata->dev, "SRP_LOGIN succeeded\n");
-
-	if (evt_struct->xfer_iu->srp.login_rsp.req_lim_delta < 0)
-		dev_err(hostdata->dev, "Invalid request_limit.\n");
+	hostdata->client_migrated = 0;
 
 	/* Now we know what the real request-limit is.
 	 * This value is set rather than added to request_limit because
@@ -922,15 +879,12 @@
 
 	/* If we had any pending I/Os, kick them */
 	scsi_unblock_requests(hostdata->host);
-
-	send_mad_adapter_info(hostdata);
-	return;
 }
 
 /**
  * send_srp_login: - Sends the srp login
  * @hostdata:	ibmvscsi_host_data of host
- * 
+ *
  * Returns zero if successful.
 */
 static int send_srp_login(struct ibmvscsi_host_data *hostdata)
@@ -939,22 +893,17 @@
 	unsigned long flags;
 	struct srp_login_req *login;
 	struct srp_event_struct *evt_struct = get_event_struct(&hostdata->pool);
-	if (!evt_struct) {
-		dev_err(hostdata->dev, "couldn't allocate an event for login req!\n");
-		return FAILED;
-	}
 
-	init_event_struct(evt_struct,
-			  login_rsp,
-			  VIOSRP_SRP_FORMAT,
-			  init_timeout);
+	BUG_ON(!evt_struct);
+	init_event_struct(evt_struct, login_rsp,
+			  VIOSRP_SRP_FORMAT, login_timeout);
 
 	login = &evt_struct->iu.srp.login_req;
-	memset(login, 0x00, sizeof(struct srp_login_req));
+	memset(login, 0, sizeof(*login));
 	login->opcode = SRP_LOGIN_REQ;
 	login->req_it_iu_len = sizeof(union srp_iu);
 	login->req_buf_fmt = SRP_BUF_FORMAT_DIRECT | SRP_BUF_FORMAT_INDIRECT;
-	
+
 	spin_lock_irqsave(hostdata->host->host_lock, flags);
 	/* Start out with a request limit of 0, since this is negotiated in
 	 * the login request we are just sending and login requests always
@@ -962,13 +911,241 @@
 	 */
 	atomic_set(&hostdata->request_limit, 0);
 
-	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2);
+	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, login_timeout * 2);
 	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
 	dev_info(hostdata->dev, "sent SRP login\n");
 	return rc;
 };
 
 /**
+ * capabilities_rsp: - Handle response to MAD adapter capabilities request
+ * @evt_struct:	srp_event_struct with the response
+ *
+ * Used as a "done" callback by when sending adapter_info.
+ */
+static void capabilities_rsp(struct srp_event_struct *evt_struct)
+{
+	struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
+
+	if (evt_struct->xfer_iu->mad.capabilities.common.status) {
+		dev_err(hostdata->dev, "error 0x%X getting capabilities info\n",
+			evt_struct->xfer_iu->mad.capabilities.common.status);
+	} else {
+		if (hostdata->caps.migration.common.server_support != SERVER_SUPPORTS_CAP)
+			dev_info(hostdata->dev, "Partition migration not supported\n");
+
+		if (client_reserve) {
+			if (hostdata->caps.reserve.common.server_support ==
+			    SERVER_SUPPORTS_CAP)
+				dev_info(hostdata->dev, "Client reserve enabled\n");
+			else
+				dev_info(hostdata->dev, "Client reserve not supported\n");
+		}
+	}
+
+	send_srp_login(hostdata);
+}
+
+/**
+ * send_mad_capabilities: - Sends the mad capabilities request
+ *      and stores the result so it can be retrieved with
+ * @hostdata:	ibmvscsi_host_data of host
+ */
+static void send_mad_capabilities(struct ibmvscsi_host_data *hostdata)
+{
+	struct viosrp_capabilities *req;
+	struct srp_event_struct *evt_struct;
+	unsigned long flags;
+	struct device_node *of_node = hostdata->dev->archdata.of_node;
+	const char *location;
+
+	evt_struct = get_event_struct(&hostdata->pool);
+	BUG_ON(!evt_struct);
+
+	init_event_struct(evt_struct, capabilities_rsp,
+			  VIOSRP_MAD_FORMAT, info_timeout);
+
+	req = &evt_struct->iu.mad.capabilities;
+	memset(req, 0, sizeof(*req));
+
+	hostdata->caps.flags = CAP_LIST_SUPPORTED;
+	if (hostdata->client_migrated)
+		hostdata->caps.flags |= CLIENT_MIGRATED;
+
+	strncpy(hostdata->caps.name, dev_name(&hostdata->host->shost_gendev),
+		sizeof(hostdata->caps.name));
+	hostdata->caps.name[sizeof(hostdata->caps.name) - 1] = '\0';
+
+	location = of_get_property(of_node, "ibm,loc-code", NULL);
+	location = location ? location : dev_name(hostdata->dev);
+	strncpy(hostdata->caps.loc, location, sizeof(hostdata->caps.loc));
+	hostdata->caps.loc[sizeof(hostdata->caps.loc) - 1] = '\0';
+
+	req->common.type = VIOSRP_CAPABILITIES_TYPE;
+	req->buffer = hostdata->caps_addr;
+
+	hostdata->caps.migration.common.cap_type = MIGRATION_CAPABILITIES;
+	hostdata->caps.migration.common.length = sizeof(hostdata->caps.migration);
+	hostdata->caps.migration.common.server_support = SERVER_SUPPORTS_CAP;
+	hostdata->caps.migration.ecl = 1;
+
+	if (client_reserve) {
+		hostdata->caps.reserve.common.cap_type = RESERVATION_CAPABILITIES;
+		hostdata->caps.reserve.common.length = sizeof(hostdata->caps.reserve);
+		hostdata->caps.reserve.common.server_support = SERVER_SUPPORTS_CAP;
+		hostdata->caps.reserve.type = CLIENT_RESERVE_SCSI_2;
+		req->common.length = sizeof(hostdata->caps);
+	} else
+		req->common.length = sizeof(hostdata->caps) - sizeof(hostdata->caps.reserve);
+
+	spin_lock_irqsave(hostdata->host->host_lock, flags);
+	if (ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2))
+		dev_err(hostdata->dev, "couldn't send CAPABILITIES_REQ!\n");
+	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
+};
+
+/**
+ * fast_fail_rsp: - Handle response to MAD enable fast fail
+ * @evt_struct:	srp_event_struct with the response
+ *
+ * Used as a "done" callback by when sending enable fast fail. Gets called
+ * by ibmvscsi_handle_crq()
+ */
+static void fast_fail_rsp(struct srp_event_struct *evt_struct)
+{
+	struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
+	u8 status = evt_struct->xfer_iu->mad.fast_fail.common.status;
+
+	if (status == VIOSRP_MAD_NOT_SUPPORTED)
+		dev_err(hostdata->dev, "fast_fail not supported in server\n");
+	else if (status == VIOSRP_MAD_FAILED)
+		dev_err(hostdata->dev, "fast_fail request failed\n");
+	else if (status != VIOSRP_MAD_SUCCESS)
+		dev_err(hostdata->dev, "error 0x%X enabling fast_fail\n", status);
+
+	send_mad_capabilities(hostdata);
+}
+
+/**
+ * init_host - Start host initialization
+ * @hostdata:	ibmvscsi_host_data of host
+ *
+ * Returns zero if successful.
+ */
+static int enable_fast_fail(struct ibmvscsi_host_data *hostdata)
+{
+	int rc;
+	unsigned long flags;
+	struct viosrp_fast_fail *fast_fail_mad;
+	struct srp_event_struct *evt_struct;
+
+	if (!fast_fail) {
+		send_mad_capabilities(hostdata);
+		return 0;
+	}
+
+	evt_struct = get_event_struct(&hostdata->pool);
+	BUG_ON(!evt_struct);
+
+	init_event_struct(evt_struct, fast_fail_rsp, VIOSRP_MAD_FORMAT, info_timeout);
+
+	fast_fail_mad = &evt_struct->iu.mad.fast_fail;
+	memset(fast_fail_mad, 0, sizeof(*fast_fail_mad));
+	fast_fail_mad->common.type = VIOSRP_ENABLE_FAST_FAIL;
+	fast_fail_mad->common.length = sizeof(*fast_fail_mad);
+
+	spin_lock_irqsave(hostdata->host->host_lock, flags);
+	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2);
+	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
+	return rc;
+}
+
+/**
+ * adapter_info_rsp: - Handle response to MAD adapter info request
+ * @evt_struct:	srp_event_struct with the response
+ *
+ * Used as a "done" callback by when sending adapter_info. Gets called
+ * by ibmvscsi_handle_crq()
+*/
+static void adapter_info_rsp(struct srp_event_struct *evt_struct)
+{
+	struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
+
+	if (evt_struct->xfer_iu->mad.adapter_info.common.status) {
+		dev_err(hostdata->dev, "error %d getting adapter info\n",
+			evt_struct->xfer_iu->mad.adapter_info.common.status);
+	} else {
+		dev_info(hostdata->dev, "host srp version: %s, "
+			 "host partition %s (%d), OS %d, max io %u\n",
+			 hostdata->madapter_info.srp_version,
+			 hostdata->madapter_info.partition_name,
+			 hostdata->madapter_info.partition_number,
+			 hostdata->madapter_info.os_type,
+			 hostdata->madapter_info.port_max_txu[0]);
+		
+		if (hostdata->madapter_info.port_max_txu[0]) 
+			hostdata->host->max_sectors = 
+				hostdata->madapter_info.port_max_txu[0] >> 9;
+		
+		if (hostdata->madapter_info.os_type == 3 &&
+		    strcmp(hostdata->madapter_info.srp_version, "1.6a") <= 0) {
+			dev_err(hostdata->dev, "host (Ver. %s) doesn't support large transfers\n",
+				hostdata->madapter_info.srp_version);
+			dev_err(hostdata->dev, "limiting scatterlists to %d\n",
+				MAX_INDIRECT_BUFS);
+			hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
+		}
+	}
+
+	enable_fast_fail(hostdata);
+}
+
+/**
+ * send_mad_adapter_info: - Sends the mad adapter info request
+ *      and stores the result so it can be retrieved with
+ *      sysfs.  We COULD consider causing a failure if the
+ *      returned SRP version doesn't match ours.
+ * @hostdata:	ibmvscsi_host_data of host
+ * 
+ * Returns zero if successful.
+*/
+static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
+{
+	struct viosrp_adapter_info *req;
+	struct srp_event_struct *evt_struct;
+	unsigned long flags;
+
+	evt_struct = get_event_struct(&hostdata->pool);
+	BUG_ON(!evt_struct);
+
+	init_event_struct(evt_struct,
+			  adapter_info_rsp,
+			  VIOSRP_MAD_FORMAT,
+			  info_timeout);
+	
+	req = &evt_struct->iu.mad.adapter_info;
+	memset(req, 0x00, sizeof(*req));
+	
+	req->common.type = VIOSRP_ADAPTER_INFO_TYPE;
+	req->common.length = sizeof(hostdata->madapter_info);
+	req->buffer = hostdata->adapter_info_addr;
+
+	spin_lock_irqsave(hostdata->host->host_lock, flags);
+	if (ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2))
+		dev_err(hostdata->dev, "couldn't send ADAPTER_INFO_REQ!\n");
+	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
+};
+
+/**
+ * init_adapter: Start virtual adapter initialization sequence
+ *
+ */
+static void init_adapter(struct ibmvscsi_host_data *hostdata)
+{
+	send_mad_adapter_info(hostdata);
+}
+
+/**
  * sync_completion: Signal that a synchronous command has completed
  * Note that after returning from this call, the evt_struct is freed.
  * the caller waiting on this completion shouldn't touch the evt_struct
@@ -1029,7 +1206,7 @@
 		init_event_struct(evt,
 				  sync_completion,
 				  VIOSRP_SRP_FORMAT,
-				  init_timeout);
+				  abort_timeout);
 
 		tsk_mgmt = &evt->iu.srp.tsk_mgmt;
 	
@@ -1043,7 +1220,7 @@
 		evt->sync_srp = &srp_rsp;
 
 		init_completion(&evt->comp);
-		rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, init_timeout * 2);
+		rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, abort_timeout * 2);
 
 		if (rsp_rc != SCSI_MLQUEUE_HOST_BUSY)
 			break;
@@ -1152,7 +1329,7 @@
 		init_event_struct(evt,
 				  sync_completion,
 				  VIOSRP_SRP_FORMAT,
-				  init_timeout);
+				  reset_timeout);
 
 		tsk_mgmt = &evt->iu.srp.tsk_mgmt;
 
@@ -1165,7 +1342,7 @@
 		evt->sync_srp = &srp_rsp;
 
 		init_completion(&evt->comp);
-		rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, init_timeout * 2);
+		rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, reset_timeout * 2);
 
 		if (rsp_rc != SCSI_MLQUEUE_HOST_BUSY)
 			break;
@@ -1281,7 +1458,7 @@
 			if ((rc = ibmvscsi_ops->send_crq(hostdata,
 							 0xC002000000000000LL, 0)) == 0) {
 				/* Now login */
-				send_srp_login(hostdata);
+				init_adapter(hostdata);
 			} else {
 				dev_err(hostdata->dev, "Unable to send init rsp. rc=%ld\n", rc);
 			}
@@ -1291,7 +1468,7 @@
 			dev_info(hostdata->dev, "partner initialization complete\n");
 
 			/* Now login */
-			send_srp_login(hostdata);
+			init_adapter(hostdata);
 			break;
 		default:
 			dev_err(hostdata->dev, "unknown crq message type: %d\n", crq->format);
@@ -1303,6 +1480,7 @@
 		if (crq->format == 0x06) {
 			/* We need to re-setup the interpartition connection */
 			dev_info(hostdata->dev, "Re-enabling adapter!\n");
+			hostdata->client_migrated = 1;
 			purge_requests(hostdata, DID_REQUEUE);
 			if ((ibmvscsi_ops->reenable_crq_queue(&hostdata->queue,
 							      hostdata)) ||
@@ -1397,7 +1575,7 @@
 	init_event_struct(evt_struct,
 			  sync_completion,
 			  VIOSRP_MAD_FORMAT,
-			  init_timeout);
+			  info_timeout);
 
 	host_config = &evt_struct->iu.mad.host_config;
 
@@ -1419,7 +1597,7 @@
 
 	init_completion(&evt_struct->comp);
 	spin_lock_irqsave(hostdata->host->host_lock, flags);
-	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2);
+	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2);
 	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
 	if (rc == 0)
 		wait_for_completion(&evt_struct->comp);
@@ -1444,7 +1622,7 @@
 	spin_lock_irqsave(shost->host_lock, lock_flags);
 	if (sdev->type == TYPE_DISK) {
 		sdev->allow_restart = 1;
-		blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
+		blk_queue_rq_timeout(sdev->request_queue, 120 * HZ);
 	}
 	scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun);
 	spin_unlock_irqrestore(shost->host_lock, lock_flags);
@@ -1471,6 +1649,46 @@
 /* ------------------------------------------------------------
  * sysfs attributes
  */
+static ssize_t show_host_vhost_loc(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ibmvscsi_host_data *hostdata = shost_priv(shost);
+	int len;
+
+	len = snprintf(buf, sizeof(hostdata->caps.loc), "%s\n",
+		       hostdata->caps.loc);
+	return len;
+}
+
+static struct device_attribute ibmvscsi_host_vhost_loc = {
+	.attr = {
+		 .name = "vhost_loc",
+		 .mode = S_IRUGO,
+		 },
+	.show = show_host_vhost_loc,
+};
+
+static ssize_t show_host_vhost_name(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ibmvscsi_host_data *hostdata = shost_priv(shost);
+	int len;
+
+	len = snprintf(buf, sizeof(hostdata->caps.name), "%s\n",
+		       hostdata->caps.name);
+	return len;
+}
+
+static struct device_attribute ibmvscsi_host_vhost_name = {
+	.attr = {
+		 .name = "vhost_name",
+		 .mode = S_IRUGO,
+		 },
+	.show = show_host_vhost_name,
+};
+
 static ssize_t show_host_srp_version(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
@@ -1594,6 +1812,8 @@
 };
 
 static struct device_attribute *ibmvscsi_attrs[] = {
+	&ibmvscsi_host_vhost_loc,
+	&ibmvscsi_host_vhost_name,
 	&ibmvscsi_host_srp_version,
 	&ibmvscsi_host_partition_name,
 	&ibmvscsi_host_partition_number,
@@ -1674,6 +1894,11 @@
 	atomic_set(&hostdata->request_limit, -1);
 	hostdata->host->max_sectors = IBMVSCSI_MAX_SECTORS_DEFAULT;
 
+	if (map_persist_bufs(hostdata)) {
+		dev_err(&vdev->dev, "couldn't map persistent buffers\n");
+		goto persist_bufs_failed;
+	}
+
 	rc = ibmvscsi_ops->init_crq_queue(&hostdata->queue, hostdata, max_events);
 	if (rc != 0 && rc != H_RESOURCE) {
 		dev_err(&vdev->dev, "couldn't initialize crq. rc=%d\n", rc);
@@ -1687,6 +1912,7 @@
 	host->max_lun = 8;
 	host->max_id = max_id;
 	host->max_channel = max_channel;
+	host->max_cmd_len = 16;
 
 	if (scsi_add_host(hostdata->host, hostdata->dev))
 		goto add_host_failed;
@@ -1733,6 +1959,8 @@
       init_pool_failed:
 	ibmvscsi_ops->release_crq_queue(&hostdata->queue, hostdata, max_events);
       init_crq_failed:
+	unmap_persist_bufs(hostdata);
+      persist_bufs_failed:
 	scsi_host_put(host);
       scsi_host_alloc_failed:
 	return -1;
@@ -1741,6 +1969,7 @@
 static int ibmvscsi_remove(struct vio_dev *vdev)
 {
 	struct ibmvscsi_host_data *hostdata = vdev->dev.driver_data;
+	unmap_persist_bufs(hostdata);
 	release_event_pool(&hostdata->pool, hostdata);
 	ibmvscsi_ops->release_crq_queue(&hostdata->queue, hostdata,
 					max_events);
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index 2d4339d..7642530 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -90,6 +90,7 @@
 /* all driver data associated with a host adapter */
 struct ibmvscsi_host_data {
 	atomic_t request_limit;
+	int client_migrated;
 	struct device *dev;
 	struct event_pool pool;
 	struct crq_queue queue;
@@ -97,6 +98,9 @@
 	struct list_head sent;
 	struct Scsi_Host *host;
 	struct mad_adapter_info_data madapter_info;
+	struct capabilities caps;
+	dma_addr_t caps_addr;
+	dma_addr_t adapter_info_addr;
 };
 
 /* routines for managing a command/response queue */
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 2046045..2cd735d 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -37,6 +37,7 @@
 
 #define SRP_VERSION "16.a"
 #define SRP_MAX_IU_LEN	256
+#define SRP_MAX_LOC_LEN 32
 
 union srp_iu {
 	struct srp_login_req login_req;
@@ -86,7 +87,37 @@
 	VIOSRP_EMPTY_IU_TYPE = 0x01,
 	VIOSRP_ERROR_LOG_TYPE = 0x02,
 	VIOSRP_ADAPTER_INFO_TYPE = 0x03,
-	VIOSRP_HOST_CONFIG_TYPE = 0x04
+	VIOSRP_HOST_CONFIG_TYPE = 0x04,
+	VIOSRP_CAPABILITIES_TYPE = 0x05,
+	VIOSRP_ENABLE_FAST_FAIL = 0x08,
+};
+
+enum viosrp_mad_status {
+	VIOSRP_MAD_SUCCESS = 0x00,
+	VIOSRP_MAD_NOT_SUPPORTED = 0xF1,
+	VIOSRP_MAD_FAILED = 0xF7,
+};
+
+enum viosrp_capability_type {
+	MIGRATION_CAPABILITIES = 0x01,
+	RESERVATION_CAPABILITIES = 0x02,
+};
+
+enum viosrp_capability_support {
+	SERVER_DOES_NOT_SUPPORTS_CAP = 0x0,
+	SERVER_SUPPORTS_CAP = 0x01,
+	SERVER_CAP_DATA = 0x02,
+};
+
+enum viosrp_reserve_type {
+	CLIENT_RESERVE_SCSI_2 = 0x01,
+};
+
+enum viosrp_capability_flag {
+	CLIENT_MIGRATED = 0x01,
+	CLIENT_RECONNECT = 0x02,
+	CAP_LIST_SUPPORTED = 0x04,
+	CAP_LIST_DATA = 0x08,
 };
 
 /* 
@@ -127,11 +158,46 @@
 	u64 buffer;
 };
 
+struct viosrp_fast_fail {
+	struct mad_common common;
+};
+
+struct viosrp_capabilities {
+	struct mad_common common;
+	u64 buffer;
+};
+
+struct mad_capability_common {
+	u32 cap_type;
+	u16 length;
+	u16 server_support;
+};
+
+struct mad_reserve_cap {
+	struct mad_capability_common common;
+	u32 type;
+};
+
+struct mad_migration_cap {
+	struct mad_capability_common common;
+	u32 ecl;
+};
+
+struct capabilities{
+	u32 flags;
+	char name[SRP_MAX_LOC_LEN];
+	char loc[SRP_MAX_LOC_LEN];
+	struct mad_migration_cap migration;
+	struct mad_reserve_cap reserve;
+};
+
 union mad_iu {
 	struct viosrp_empty_iu empty_iu;
 	struct viosrp_error_log error_log;
 	struct viosrp_adapter_info adapter_info;
 	struct viosrp_host_config host_config;
+	struct viosrp_fast_fail fast_fail;
+	struct viosrp_capabilities capabilities;
 };
 
 union viosrp_iu {
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index dd689de..0f8bc77 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -7003,6 +7003,7 @@
 		ioa_cfg->sdt_state = ABORT_DUMP;
 	ioa_cfg->reset_retries = IPR_NUM_RESET_RELOAD_RETRIES;
 	ioa_cfg->in_ioa_bringdown = 1;
+	ioa_cfg->allow_cmds = 0;
 	ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
 }
@@ -7688,7 +7689,7 @@
  * Return value:
  * 	none
  **/
-static void ipr_remove(struct pci_dev *pdev)
+static void __devexit ipr_remove(struct pci_dev *pdev)
 {
 	struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
 
@@ -7864,7 +7865,7 @@
 	.name = IPR_NAME,
 	.id_table = ipr_pci_table,
 	.probe = ipr_probe,
-	.remove = ipr_remove,
+	.remove = __devexit_p(ipr_remove),
 	.shutdown = ipr_shutdown,
 	.err_handler = &ipr_err_handler,
 };
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 992af05..7af9bce 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -1159,6 +1159,10 @@
 		atomic_inc(&mp->stats.xid_not_found);
 		goto out;
 	}
+	if (ep->esb_stat & ESB_ST_COMPLETE) {
+		atomic_inc(&mp->stats.xid_not_found);
+		goto out;
+	}
 	if (ep->rxid == FC_XID_UNKNOWN)
 		ep->rxid = ntohs(fh->fh_rx_id);
 	if (ep->sid != 0 && ep->sid != ntoh24(fh->fh_d_id)) {
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 521f996..ad8b747 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -1896,7 +1896,7 @@
 		sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
 		break;
 	case FC_CMD_ABORTED:
-		sc_cmd->result = (DID_ABORT << 16) | fsp->io_status;
+		sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
 		break;
 	case FC_CMD_TIME_OUT:
 		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 747d73c..7bfbff7 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -478,7 +478,7 @@
 	if (PTR_ERR(fp) == -FC_EX_CLOSED)
 		return fc_rport_error(rport, fp);
 
-	if (rdata->retries < rdata->local_port->max_retry_count) {
+	if (rdata->retries < rdata->local_port->max_rport_retry_count) {
 		FC_DEBUG_RPORT("Error %ld in state %s, retrying\n",
 			       PTR_ERR(fp), fc_rport_state(rport));
 		rdata->retries++;
@@ -1330,7 +1330,7 @@
 }
 EXPORT_SYMBOL(fc_rport_init);
 
-int fc_setup_rport()
+int fc_setup_rport(void)
 {
 	rport_event_queue = create_singlethread_workqueue("fc_rport_eq");
 	if (!rport_event_queue)
@@ -1339,7 +1339,7 @@
 }
 EXPORT_SYMBOL(fc_setup_rport);
 
-void fc_destroy_rport()
+void fc_destroy_rport(void)
 {
 	destroy_workqueue(rport_event_queue);
 }
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index e72b4ad..59908ae 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -81,7 +81,8 @@
 	struct Scsi_Host *shost = conn->session->host;
 	struct iscsi_host *ihost = shost_priv(shost);
 
-	queue_work(ihost->workq, &conn->xmitwork);
+	if (ihost->workq)
+		queue_work(ihost->workq, &conn->xmitwork);
 }
 EXPORT_SYMBOL_GPL(iscsi_conn_queue_work);
 
@@ -109,11 +110,9 @@
 		 * if the window closed with IO queued, then kick the
 		 * xmit thread
 		 */
-		if (!list_empty(&session->leadconn->xmitqueue) ||
-		    !list_empty(&session->leadconn->mgmtqueue)) {
-			if (!(session->tt->caps & CAP_DATA_PATH_OFFLOAD))
-				iscsi_conn_queue_work(session->leadconn);
-		}
+		if (!list_empty(&session->leadconn->cmdqueue) ||
+		    !list_empty(&session->leadconn->mgmtqueue))
+			iscsi_conn_queue_work(session->leadconn);
 	}
 }
 EXPORT_SYMBOL_GPL(iscsi_update_cmdsn);
@@ -257,9 +256,11 @@
 	itt_t itt;
 	int rc;
 
-	rc = conn->session->tt->alloc_pdu(task, ISCSI_OP_SCSI_CMD);
-	if (rc)
-		return rc;
+	if (conn->session->tt->alloc_pdu) {
+		rc = conn->session->tt->alloc_pdu(task, ISCSI_OP_SCSI_CMD);
+		if (rc)
+			return rc;
+	}
 	hdr = (struct iscsi_cmd *) task->hdr;
 	itt = hdr->itt;
 	memset(hdr, 0, sizeof(*hdr));
@@ -364,7 +365,6 @@
 		return -EIO;
 
 	task->state = ISCSI_TASK_RUNNING;
-	list_move_tail(&task->running, &conn->run_list);
 
 	conn->scsicmd_pdus_cnt++;
 	ISCSI_DBG_SESSION(session, "iscsi prep [%s cid %d sc %p cdb 0x%x "
@@ -380,26 +380,25 @@
 }
 
 /**
- * iscsi_complete_command - finish a task
+ * iscsi_free_task - free a task
  * @task: iscsi cmd task
  *
  * Must be called with session lock.
  * This function returns the scsi command to scsi-ml or cleans
  * up mgmt tasks then returns the task to the pool.
  */
-static void iscsi_complete_command(struct iscsi_task *task)
+static void iscsi_free_task(struct iscsi_task *task)
 {
 	struct iscsi_conn *conn = task->conn;
 	struct iscsi_session *session = conn->session;
 	struct scsi_cmnd *sc = task->sc;
 
-	session->tt->cleanup_task(task);
-	list_del_init(&task->running);
-	task->state = ISCSI_TASK_COMPLETED;
-	task->sc = NULL;
+	ISCSI_DBG_SESSION(session, "freeing task itt 0x%x state %d sc %p\n",
+			  task->itt, task->state, task->sc);
 
-	if (conn->task == task)
-		conn->task = NULL;
+	session->tt->cleanup_task(task);
+	task->state = ISCSI_TASK_FREE;
+	task->sc = NULL;
 	/*
 	 * login task is preallocated so do not free
 	 */
@@ -408,9 +407,6 @@
 
 	__kfifo_put(session->cmdpool.queue, (void*)&task, sizeof(void*));
 
-	if (conn->ping_task == task)
-		conn->ping_task = NULL;
-
 	if (sc) {
 		task->sc = NULL;
 		/* SCSI eh reuses commands to verify us */
@@ -433,7 +429,7 @@
 static void __iscsi_put_task(struct iscsi_task *task)
 {
 	if (atomic_dec_and_test(&task->refcount))
-		iscsi_complete_command(task);
+		iscsi_free_task(task);
 }
 
 void iscsi_put_task(struct iscsi_task *task)
@@ -446,26 +442,74 @@
 }
 EXPORT_SYMBOL_GPL(iscsi_put_task);
 
-/*
- * session lock must be held
+/**
+ * iscsi_complete_task - finish a task
+ * @task: iscsi cmd task
+ * @state: state to complete task with
+ *
+ * Must be called with session lock.
  */
-static void fail_command(struct iscsi_conn *conn, struct iscsi_task *task,
-			 int err)
+static void iscsi_complete_task(struct iscsi_task *task, int state)
 {
-	struct scsi_cmnd *sc;
+	struct iscsi_conn *conn = task->conn;
 
+	ISCSI_DBG_SESSION(conn->session,
+			  "complete task itt 0x%x state %d sc %p\n",
+			  task->itt, task->state, task->sc);
+	if (task->state == ISCSI_TASK_COMPLETED ||
+	    task->state == ISCSI_TASK_ABRT_TMF ||
+	    task->state == ISCSI_TASK_ABRT_SESS_RECOV)
+		return;
+	WARN_ON_ONCE(task->state == ISCSI_TASK_FREE);
+	task->state = state;
+
+	if (!list_empty(&task->running))
+		list_del_init(&task->running);
+
+	if (conn->task == task)
+		conn->task = NULL;
+
+	if (conn->ping_task == task)
+		conn->ping_task = NULL;
+
+	/* release get from queueing */
+	__iscsi_put_task(task);
+}
+
+/*
+ * session lock must be held and if not called for a task that is
+ * still pending or from the xmit thread, then xmit thread must
+ * be suspended.
+ */
+static void fail_scsi_task(struct iscsi_task *task, int err)
+{
+	struct iscsi_conn *conn = task->conn;
+	struct scsi_cmnd *sc;
+	int state;
+
+	/*
+	 * if a command completes and we get a successful tmf response
+	 * we will hit this because the scsi eh abort code does not take
+	 * a ref to the task.
+	 */
 	sc = task->sc;
 	if (!sc)
 		return;
 
-	if (task->state == ISCSI_TASK_PENDING)
+	if (task->state == ISCSI_TASK_PENDING) {
 		/*
 		 * cmd never made it to the xmit thread, so we should not count
 		 * the cmd in the sequencing
 		 */
 		conn->session->queued_cmdsn--;
+		/* it was never sent so just complete like normal */
+		state = ISCSI_TASK_COMPLETED;
+	} else if (err == DID_TRANSPORT_DISRUPTED)
+		state = ISCSI_TASK_ABRT_SESS_RECOV;
+	else
+		state = ISCSI_TASK_ABRT_TMF;
 
-	sc->result = err;
+	sc->result = err << 16;
 	if (!scsi_bidi_cmnd(sc))
 		scsi_set_resid(sc, scsi_bufflen(sc));
 	else {
@@ -473,10 +517,7 @@
 		scsi_in(sc)->resid = scsi_in(sc)->length;
 	}
 
-	if (conn->task == task)
-		conn->task = NULL;
-	/* release ref from queuecommand */
-	__iscsi_put_task(task);
+	iscsi_complete_task(task, state);
 }
 
 static int iscsi_prep_mgmt_task(struct iscsi_conn *conn,
@@ -516,7 +557,6 @@
 		session->state = ISCSI_STATE_LOGGING_OUT;
 
 	task->state = ISCSI_TASK_RUNNING;
-	list_move_tail(&task->running, &conn->mgmt_run_list);
 	ISCSI_DBG_SESSION(session, "mgmtpdu [op 0x%x hdr->itt 0x%x "
 			  "datalen %d]\n", hdr->opcode & ISCSI_OPCODE_MASK,
 			  hdr->itt, task->data_count);
@@ -528,6 +568,7 @@
 		      char *data, uint32_t data_size)
 {
 	struct iscsi_session *session = conn->session;
+	struct iscsi_host *ihost = shost_priv(session->host);
 	struct iscsi_task *task;
 	itt_t itt;
 
@@ -544,6 +585,9 @@
 		 */
 		task = conn->login_task;
 	else {
+		if (session->state != ISCSI_STATE_LOGGED_IN)
+			return NULL;
+
 		BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE);
 		BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED);
 
@@ -559,6 +603,8 @@
 	atomic_set(&task->refcount, 1);
 	task->conn = conn;
 	task->sc = NULL;
+	INIT_LIST_HEAD(&task->running);
+	task->state = ISCSI_TASK_PENDING;
 
 	if (data_size) {
 		memcpy(task->data, data, data_size);
@@ -566,11 +612,14 @@
 	} else
 		task->data_count = 0;
 
-	if (conn->session->tt->alloc_pdu(task, hdr->opcode)) {
-		iscsi_conn_printk(KERN_ERR, conn, "Could not allocate "
-				 "pdu for mgmt task.\n");
-		goto requeue_task;
+	if (conn->session->tt->alloc_pdu) {
+		if (conn->session->tt->alloc_pdu(task, hdr->opcode)) {
+			iscsi_conn_printk(KERN_ERR, conn, "Could not allocate "
+					 "pdu for mgmt task.\n");
+			goto free_task;
+		}
 	}
+
 	itt = task->hdr->itt;
 	task->hdr_len = sizeof(struct iscsi_hdr);
 	memcpy(task->hdr, hdr, sizeof(struct iscsi_hdr));
@@ -583,30 +632,22 @@
 						   task->conn->session->age);
 	}
 
-	INIT_LIST_HEAD(&task->running);
-	list_add_tail(&task->running, &conn->mgmtqueue);
-
-	if (session->tt->caps & CAP_DATA_PATH_OFFLOAD) {
+	if (!ihost->workq) {
 		if (iscsi_prep_mgmt_task(conn, task))
 			goto free_task;
 
 		if (session->tt->xmit_task(task))
 			goto free_task;
-
-	} else
+	} else {
+		list_add_tail(&task->running, &conn->mgmtqueue);
 		iscsi_conn_queue_work(conn);
+	}
 
 	return task;
 
 free_task:
 	__iscsi_put_task(task);
 	return NULL;
-
-requeue_task:
-	if (task != conn->login_task)
-		__kfifo_put(session->cmdpool.queue, (void*)&task,
-			    sizeof(void*));
-	return NULL;
 }
 
 int iscsi_conn_send_pdu(struct iscsi_cls_conn *cls_conn, struct iscsi_hdr *hdr,
@@ -701,11 +742,10 @@
 			sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status;
 	}
 out:
-	ISCSI_DBG_SESSION(session, "done [sc %p res %d itt 0x%x]\n",
+	ISCSI_DBG_SESSION(session, "cmd rsp done [sc %p res %d itt 0x%x]\n",
 			  sc, sc->result, task->itt);
 	conn->scsirsp_pdus_cnt++;
-
-	__iscsi_put_task(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 }
 
 /**
@@ -724,6 +764,7 @@
 	if (!(rhdr->flags & ISCSI_FLAG_DATA_STATUS))
 		return;
 
+	iscsi_update_cmdsn(conn->session, (struct iscsi_nopin *)hdr);
 	sc->result = (DID_OK << 16) | rhdr->cmd_status;
 	conn->exp_statsn = be32_to_cpu(rhdr->statsn) + 1;
 	if (rhdr->flags & (ISCSI_FLAG_DATA_UNDERFLOW |
@@ -738,8 +779,11 @@
 			sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status;
 	}
 
+	ISCSI_DBG_SESSION(conn->session, "data in with status done "
+			  "[sc %p res %d itt 0x%x]\n",
+			  sc, sc->result, task->itt);
 	conn->scsirsp_pdus_cnt++;
-	__iscsi_put_task(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 }
 
 static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr)
@@ -823,7 +867,7 @@
  *
  * The session lock must be held.
  */
-static struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *conn, itt_t itt)
+struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *conn, itt_t itt)
 {
 	struct iscsi_session *session = conn->session;
 	int i;
@@ -840,6 +884,7 @@
 
 	return session->cmds[i];
 }
+EXPORT_SYMBOL_GPL(iscsi_itt_to_task);
 
 /**
  * __iscsi_complete_pdu - complete pdu
@@ -959,7 +1004,7 @@
 		}
 
 		iscsi_tmf_rsp(conn, hdr);
-		__iscsi_put_task(task);
+		iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 		break;
 	case ISCSI_OP_NOOP_IN:
 		iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr);
@@ -977,7 +1022,7 @@
 			goto recv_pdu;
 
 		mod_timer(&conn->transport_timer, jiffies + conn->recv_timeout);
-		__iscsi_put_task(task);
+		iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 		break;
 	default:
 		rc = ISCSI_ERR_BAD_OPCODE;
@@ -989,7 +1034,7 @@
 recv_pdu:
 	if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen))
 		rc = ISCSI_ERR_CONN_FAILED;
-	__iscsi_put_task(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(__iscsi_complete_pdu);
@@ -1166,7 +1211,12 @@
 {
 	struct iscsi_conn *conn = task->conn;
 
-	list_move_tail(&task->running, &conn->requeue);
+	/*
+	 * this may be on the requeue list already if the xmit_task callout
+	 * is handling the r2ts while we are adding new ones
+	 */
+	if (list_empty(&task->running))
+		list_add_tail(&task->running, &conn->requeue);
 	iscsi_conn_queue_work(conn);
 }
 EXPORT_SYMBOL_GPL(iscsi_requeue_task);
@@ -1206,6 +1256,7 @@
 	while (!list_empty(&conn->mgmtqueue)) {
 		conn->task = list_entry(conn->mgmtqueue.next,
 					 struct iscsi_task, running);
+		list_del_init(&conn->task->running);
 		if (iscsi_prep_mgmt_task(conn, conn->task)) {
 			__iscsi_put_task(conn->task);
 			conn->task = NULL;
@@ -1217,23 +1268,26 @@
 	}
 
 	/* process pending command queue */
-	while (!list_empty(&conn->xmitqueue)) {
+	while (!list_empty(&conn->cmdqueue)) {
 		if (conn->tmf_state == TMF_QUEUED)
 			break;
 
-		conn->task = list_entry(conn->xmitqueue.next,
+		conn->task = list_entry(conn->cmdqueue.next,
 					 struct iscsi_task, running);
+		list_del_init(&conn->task->running);
 		if (conn->session->state == ISCSI_STATE_LOGGING_OUT) {
-			fail_command(conn, conn->task, DID_IMM_RETRY << 16);
+			fail_scsi_task(conn->task, DID_IMM_RETRY);
 			continue;
 		}
 		rc = iscsi_prep_scsi_cmd_pdu(conn->task);
 		if (rc) {
 			if (rc == -ENOMEM) {
+				list_add_tail(&conn->task->running,
+					      &conn->cmdqueue);
 				conn->task = NULL;
 				goto again;
 			} else
-				fail_command(conn, conn->task, DID_ABORT << 16);
+				fail_scsi_task(conn->task, DID_ABORT);
 			continue;
 		}
 		rc = iscsi_xmit_task(conn);
@@ -1260,8 +1314,8 @@
 
 		conn->task = list_entry(conn->requeue.next,
 					 struct iscsi_task, running);
+		list_del_init(&conn->task->running);
 		conn->task->state = ISCSI_TASK_RUNNING;
-		list_move_tail(conn->requeue.next, &conn->run_list);
 		rc = iscsi_xmit_task(conn);
 		if (rc)
 			goto again;
@@ -1328,6 +1382,7 @@
 {
 	struct iscsi_cls_session *cls_session;
 	struct Scsi_Host *host;
+	struct iscsi_host *ihost;
 	int reason = 0;
 	struct iscsi_session *session;
 	struct iscsi_conn *conn;
@@ -1338,6 +1393,7 @@
 	sc->SCp.ptr = NULL;
 
 	host = sc->device->host;
+	ihost = shost_priv(host);
 	spin_unlock(host->host_lock);
 
 	cls_session = starget_to_session(scsi_target(sc->device));
@@ -1350,13 +1406,7 @@
 		goto fault;
 	}
 
-	/*
-	 * ISCSI_STATE_FAILED is a temp. state. The recovery
-	 * code will decide what is best to do with command queued
-	 * during this time
-	 */
-	if (session->state != ISCSI_STATE_LOGGED_IN &&
-	    session->state != ISCSI_STATE_FAILED) {
+	if (session->state != ISCSI_STATE_LOGGED_IN) {
 		/*
 		 * to handle the race between when we set the recovery state
 		 * and block the session we requeue here (commands could
@@ -1364,12 +1414,15 @@
 		 * up because the block code is not locked)
 		 */
 		switch (session->state) {
+		case ISCSI_STATE_FAILED:
 		case ISCSI_STATE_IN_RECOVERY:
 			reason = FAILURE_SESSION_IN_RECOVERY;
-			goto reject;
+			sc->result = DID_IMM_RETRY << 16;
+			break;
 		case ISCSI_STATE_LOGGING_OUT:
 			reason = FAILURE_SESSION_LOGGING_OUT;
-			goto reject;
+			sc->result = DID_IMM_RETRY << 16;
+			break;
 		case ISCSI_STATE_RECOVERY_FAILED:
 			reason = FAILURE_SESSION_RECOVERY_TIMEOUT;
 			sc->result = DID_TRANSPORT_FAILFAST << 16;
@@ -1402,9 +1455,8 @@
 		reason = FAILURE_OOM;
 		goto reject;
 	}
-	list_add_tail(&task->running, &conn->xmitqueue);
 
-	if (session->tt->caps & CAP_DATA_PATH_OFFLOAD) {
+	if (!ihost->workq) {
 		reason = iscsi_prep_scsi_cmd_pdu(task);
 		if (reason) {
 			if (reason == -ENOMEM) {
@@ -1419,8 +1471,10 @@
 			reason = FAILURE_SESSION_NOT_READY;
 			goto prepd_reject;
 		}
-	} else
+	} else {
+		list_add_tail(&task->running, &conn->cmdqueue);
 		iscsi_conn_queue_work(conn);
+	}
 
 	session->queued_cmdsn++;
 	spin_unlock(&session->lock);
@@ -1429,7 +1483,7 @@
 
 prepd_reject:
 	sc->scsi_done = NULL;
-	iscsi_complete_command(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 reject:
 	spin_unlock(&session->lock);
 	ISCSI_DBG_SESSION(session, "cmd 0x%x rejected (%d)\n",
@@ -1439,7 +1493,7 @@
 
 prepd_fault:
 	sc->scsi_done = NULL;
-	iscsi_complete_command(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 fault:
 	spin_unlock(&session->lock);
 	ISCSI_DBG_SESSION(session, "iscsi: cmd 0x%x is not queued (%d)\n",
@@ -1608,44 +1662,24 @@
  * Fail commands. session lock held and recv side suspended and xmit
  * thread flushed
  */
-static void fail_all_commands(struct iscsi_conn *conn, unsigned lun,
-			      int error)
+static void fail_scsi_tasks(struct iscsi_conn *conn, unsigned lun,
+			    int error)
 {
-	struct iscsi_task *task, *tmp;
+	struct iscsi_task *task;
+	int i;
 
-	if (conn->task) {
-		if (lun == -1 ||
-		    (conn->task->sc && conn->task->sc->device->lun == lun))
-			conn->task = NULL;
-	}
+	for (i = 0; i < conn->session->cmds_max; i++) {
+		task = conn->session->cmds[i];
+		if (!task->sc || task->state == ISCSI_TASK_FREE)
+			continue;
 
-	/* flush pending */
-	list_for_each_entry_safe(task, tmp, &conn->xmitqueue, running) {
-		if (lun == task->sc->device->lun || lun == -1) {
-			ISCSI_DBG_SESSION(conn->session,
-					  "failing pending sc %p itt 0x%x\n",
-					  task->sc, task->itt);
-			fail_command(conn, task, error << 16);
-		}
-	}
+		if (lun != -1 && lun != task->sc->device->lun)
+			continue;
 
-	list_for_each_entry_safe(task, tmp, &conn->requeue, running) {
-		if (lun == task->sc->device->lun || lun == -1) {
-			ISCSI_DBG_SESSION(conn->session,
-					  "failing requeued sc %p itt 0x%x\n",
-					  task->sc, task->itt);
-			fail_command(conn, task, error << 16);
-		}
-	}
-
-	/* fail all other running */
-	list_for_each_entry_safe(task, tmp, &conn->run_list, running) {
-		if (lun == task->sc->device->lun || lun == -1) {
-			ISCSI_DBG_SESSION(conn->session,
-					 "failing in progress sc %p itt 0x%x\n",
-					 task->sc, task->itt);
-			fail_command(conn, task, error << 16);
-		}
+		ISCSI_DBG_SESSION(conn->session,
+				  "failing sc %p itt 0x%x state %d\n",
+				  task->sc, task->itt, task->state);
+		fail_scsi_task(task, error);
 	}
 }
 
@@ -1655,7 +1689,7 @@
 	struct iscsi_host *ihost = shost_priv(shost);
 
 	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
-	if (!(conn->session->tt->caps & CAP_DATA_PATH_OFFLOAD))
+	if (ihost->workq)
 		flush_workqueue(ihost->workq);
 }
 EXPORT_SYMBOL_GPL(iscsi_suspend_tx);
@@ -1663,8 +1697,23 @@
 static void iscsi_start_tx(struct iscsi_conn *conn)
 {
 	clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
-	if (!(conn->session->tt->caps & CAP_DATA_PATH_OFFLOAD))
-		iscsi_conn_queue_work(conn);
+	iscsi_conn_queue_work(conn);
+}
+
+/*
+ * We want to make sure a ping is in flight. It has timed out.
+ * And we are not busy processing a pdu that is making
+ * progress but got started before the ping and is taking a while
+ * to complete so the ping is just stuck behind it in a queue.
+ */
+static int iscsi_has_ping_timed_out(struct iscsi_conn *conn)
+{
+	if (conn->ping_task &&
+	    time_before_eq(conn->last_recv + (conn->recv_timeout * HZ) +
+			   (conn->ping_timeout * HZ), jiffies))
+		return 1;
+	else
+		return 0;
 }
 
 static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd)
@@ -1702,16 +1751,20 @@
 	 * if the ping timedout then we are in the middle of cleaning up
 	 * and can let the iscsi eh handle it
 	 */
-	if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ) +
-			    (conn->ping_timeout * HZ), jiffies))
+	if (iscsi_has_ping_timed_out(conn)) {
 		rc = BLK_EH_RESET_TIMER;
+		goto done;
+	}
 	/*
 	 * if we are about to check the transport then give the command
 	 * more time
 	 */
 	if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ),
-			   jiffies))
+			   jiffies)) {
 		rc = BLK_EH_RESET_TIMER;
+		goto done;
+	}
+
 	/* if in the middle of checking the transport then give us more time */
 	if (conn->ping_task)
 		rc = BLK_EH_RESET_TIMER;
@@ -1738,13 +1791,13 @@
 
 	recv_timeout *= HZ;
 	last_recv = conn->last_recv;
-	if (conn->ping_task &&
-	    time_before_eq(conn->last_ping + (conn->ping_timeout * HZ),
-			   jiffies)) {
+
+	if (iscsi_has_ping_timed_out(conn)) {
 		iscsi_conn_printk(KERN_ERR, conn, "ping timeout of %d secs "
-				  "expired, last rx %lu, last ping %lu, "
-				  "now %lu\n", conn->ping_timeout, last_recv,
-				  conn->last_ping, jiffies);
+				  "expired, recv timeout %d, last rx %lu, "
+				  "last ping %lu, now %lu\n",
+				  conn->ping_timeout, conn->recv_timeout,
+				  last_recv, conn->last_ping, jiffies);
 		spin_unlock(&session->lock);
 		iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
 		return;
@@ -1788,6 +1841,8 @@
 	cls_session = starget_to_session(scsi_target(sc->device));
 	session = cls_session->dd_data;
 
+	ISCSI_DBG_SESSION(session, "aborting sc %p\n", sc);
+
 	mutex_lock(&session->eh_mutex);
 	spin_lock_bh(&session->lock);
 	/*
@@ -1810,6 +1865,8 @@
 	    sc->SCp.phase != session->age) {
 		spin_unlock_bh(&session->lock);
 		mutex_unlock(&session->eh_mutex);
+		ISCSI_DBG_SESSION(session, "failing abort due to dropped "
+				  "session.\n");
 		return FAILED;
 	}
 
@@ -1829,7 +1886,7 @@
 	}
 
 	if (task->state == ISCSI_TASK_PENDING) {
-		fail_command(conn, task, DID_ABORT << 16);
+		fail_scsi_task(task, DID_ABORT);
 		goto success;
 	}
 
@@ -1860,7 +1917,7 @@
 		 * then sent more data for the cmd.
 		 */
 		spin_lock(&session->lock);
-		fail_command(conn, task, DID_ABORT << 16);
+		fail_scsi_task(task, DID_ABORT);
 		conn->tmf_state = TMF_INITIAL;
 		spin_unlock(&session->lock);
 		iscsi_start_tx(conn);
@@ -1967,7 +2024,7 @@
 	iscsi_suspend_tx(conn);
 
 	spin_lock_bh(&session->lock);
-	fail_all_commands(conn, sc->device->lun, DID_ERROR);
+	fail_scsi_tasks(conn, sc->device->lun, DID_ERROR);
 	conn->tmf_state = TMF_INITIAL;
 	spin_unlock_bh(&session->lock);
 
@@ -2274,6 +2331,7 @@
 		if (cmd_task_size)
 			task->dd_data = &task[1];
 		task->itt = cmd_i;
+		task->state = ISCSI_TASK_FREE;
 		INIT_LIST_HEAD(&task->running);
 	}
 
@@ -2360,10 +2418,8 @@
 	conn->transport_timer.data = (unsigned long)conn;
 	conn->transport_timer.function = iscsi_check_transport_timeouts;
 
-	INIT_LIST_HEAD(&conn->run_list);
-	INIT_LIST_HEAD(&conn->mgmt_run_list);
 	INIT_LIST_HEAD(&conn->mgmtqueue);
-	INIT_LIST_HEAD(&conn->xmitqueue);
+	INIT_LIST_HEAD(&conn->cmdqueue);
 	INIT_LIST_HEAD(&conn->requeue);
 	INIT_WORK(&conn->xmitwork, iscsi_xmitworker);
 
@@ -2531,27 +2587,28 @@
 EXPORT_SYMBOL_GPL(iscsi_conn_start);
 
 static void
-flush_control_queues(struct iscsi_session *session, struct iscsi_conn *conn)
+fail_mgmt_tasks(struct iscsi_session *session, struct iscsi_conn *conn)
 {
-	struct iscsi_task *task, *tmp;
+	struct iscsi_task *task;
+	int i, state;
 
-	/* handle pending */
-	list_for_each_entry_safe(task, tmp, &conn->mgmtqueue, running) {
-		ISCSI_DBG_SESSION(session, "flushing pending mgmt task "
-				  "itt 0x%x\n", task->itt);
-		/* release ref from prep task */
-		__iscsi_put_task(task);
+	for (i = 0; i < conn->session->cmds_max; i++) {
+		task = conn->session->cmds[i];
+		if (task->sc)
+			continue;
+
+		if (task->state == ISCSI_TASK_FREE)
+			continue;
+
+		ISCSI_DBG_SESSION(conn->session,
+				  "failing mgmt itt 0x%x state %d\n",
+				  task->itt, task->state);
+		state = ISCSI_TASK_ABRT_SESS_RECOV;
+		if (task->state == ISCSI_TASK_PENDING)
+			state = ISCSI_TASK_COMPLETED;
+		iscsi_complete_task(task, state);
+
 	}
-
-	/* handle running */
-	list_for_each_entry_safe(task, tmp, &conn->mgmt_run_list, running) {
-		ISCSI_DBG_SESSION(session, "flushing running mgmt task "
-				  "itt 0x%x\n", task->itt);
-		/* release ref from prep task */
-		__iscsi_put_task(task);
-	}
-
-	conn->task = NULL;
 }
 
 static void iscsi_start_session_recovery(struct iscsi_session *session,
@@ -2559,8 +2616,6 @@
 {
 	int old_stop_stage;
 
-	del_timer_sync(&conn->transport_timer);
-
 	mutex_lock(&session->eh_mutex);
 	spin_lock_bh(&session->lock);
 	if (conn->stop_stage == STOP_CONN_TERM) {
@@ -2578,13 +2633,17 @@
 		session->state = ISCSI_STATE_TERMINATE;
 	else if (conn->stop_stage != STOP_CONN_RECOVER)
 		session->state = ISCSI_STATE_IN_RECOVERY;
+	spin_unlock_bh(&session->lock);
 
+	del_timer_sync(&conn->transport_timer);
+	iscsi_suspend_tx(conn);
+
+	spin_lock_bh(&session->lock);
 	old_stop_stage = conn->stop_stage;
 	conn->stop_stage = flag;
 	conn->c_stage = ISCSI_CONN_STOPPED;
 	spin_unlock_bh(&session->lock);
 
-	iscsi_suspend_tx(conn);
 	/*
 	 * for connection level recovery we should not calculate
 	 * header digest. conn->hdr_size used for optimization
@@ -2605,11 +2664,8 @@
 	 * flush queues.
 	 */
 	spin_lock_bh(&session->lock);
-	if (flag == STOP_CONN_RECOVER)
-		fail_all_commands(conn, -1, DID_TRANSPORT_DISRUPTED);
-	else
-		fail_all_commands(conn, -1, DID_ERROR);
-	flush_control_queues(session, conn);
+	fail_scsi_tasks(conn, -1, DID_TRANSPORT_DISRUPTED);
+	fail_mgmt_tasks(session, conn);
 	spin_unlock_bh(&session->lock);
 	mutex_unlock(&session->eh_mutex);
 }
@@ -2651,6 +2707,23 @@
 }
 EXPORT_SYMBOL_GPL(iscsi_conn_bind);
 
+static int iscsi_switch_str_param(char **param, char *new_val_buf)
+{
+	char *new_val;
+
+	if (*param) {
+		if (!strcmp(*param, new_val_buf))
+			return 0;
+	}
+
+	new_val = kstrdup(new_val_buf, GFP_NOIO);
+	if (!new_val)
+		return -ENOMEM;
+
+	kfree(*param);
+	*param = new_val;
+	return 0;
+}
 
 int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
 		    enum iscsi_param param, char *buf, int buflen)
@@ -2723,38 +2796,15 @@
 		sscanf(buf, "%u", &conn->exp_statsn);
 		break;
 	case ISCSI_PARAM_USERNAME:
-		kfree(session->username);
-		session->username = kstrdup(buf, GFP_KERNEL);
-		if (!session->username)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->username, buf);
 	case ISCSI_PARAM_USERNAME_IN:
-		kfree(session->username_in);
-		session->username_in = kstrdup(buf, GFP_KERNEL);
-		if (!session->username_in)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->username_in, buf);
 	case ISCSI_PARAM_PASSWORD:
-		kfree(session->password);
-		session->password = kstrdup(buf, GFP_KERNEL);
-		if (!session->password)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->password, buf);
 	case ISCSI_PARAM_PASSWORD_IN:
-		kfree(session->password_in);
-		session->password_in = kstrdup(buf, GFP_KERNEL);
-		if (!session->password_in)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->password_in, buf);
 	case ISCSI_PARAM_TARGET_NAME:
-		/* this should not change between logins */
-		if (session->targetname)
-			break;
-
-		session->targetname = kstrdup(buf, GFP_KERNEL);
-		if (!session->targetname)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->targetname, buf);
 	case ISCSI_PARAM_TPGT:
 		sscanf(buf, "%d", &session->tpgt);
 		break;
@@ -2762,25 +2812,11 @@
 		sscanf(buf, "%d", &conn->persistent_port);
 		break;
 	case ISCSI_PARAM_PERSISTENT_ADDRESS:
-		/*
-		 * this is the address returned in discovery so it should
-		 * not change between logins.
-		 */
-		if (conn->persistent_address)
-			break;
-
-		conn->persistent_address = kstrdup(buf, GFP_KERNEL);
-		if (!conn->persistent_address)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&conn->persistent_address, buf);
 	case ISCSI_PARAM_IFACE_NAME:
-		if (!session->ifacename)
-			session->ifacename = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&session->ifacename, buf);
 	case ISCSI_PARAM_INITIATOR_NAME:
-		if (!session->initiatorname)
-			session->initiatorname = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&session->initiatorname, buf);
 	default:
 		return -ENOSYS;
 	}
@@ -2851,10 +2887,7 @@
 		len = sprintf(buf, "%s\n", session->ifacename);
 		break;
 	case ISCSI_PARAM_INITIATOR_NAME:
-		if (!session->initiatorname)
-			len = sprintf(buf, "%s\n", "unknown");
-		else
-			len = sprintf(buf, "%s\n", session->initiatorname);
+		len = sprintf(buf, "%s\n", session->initiatorname);
 		break;
 	default:
 		return -ENOSYS;
@@ -2920,29 +2953,16 @@
 
 	switch (param) {
 	case ISCSI_HOST_PARAM_NETDEV_NAME:
-		if (!ihost->netdev)
-			len = sprintf(buf, "%s\n", "default");
-		else
-			len = sprintf(buf, "%s\n", ihost->netdev);
+		len = sprintf(buf, "%s\n", ihost->netdev);
 		break;
 	case ISCSI_HOST_PARAM_HWADDRESS:
-		if (!ihost->hwaddress)
-			len = sprintf(buf, "%s\n", "default");
-		else
-			len = sprintf(buf, "%s\n", ihost->hwaddress);
+		len = sprintf(buf, "%s\n", ihost->hwaddress);
 		break;
 	case ISCSI_HOST_PARAM_INITIATOR_NAME:
-		if (!ihost->initiatorname)
-			len = sprintf(buf, "%s\n", "unknown");
-		else
-			len = sprintf(buf, "%s\n", ihost->initiatorname);
+		len = sprintf(buf, "%s\n", ihost->initiatorname);
 		break;
 	case ISCSI_HOST_PARAM_IPADDRESS:
-		if (!strlen(ihost->local_address))
-			len = sprintf(buf, "%s\n", "unknown");
-		else
-			len = sprintf(buf, "%s\n",
-				      ihost->local_address);
+		len = sprintf(buf, "%s\n", ihost->local_address);
 		break;
 	default:
 		return -ENOSYS;
@@ -2959,17 +2979,11 @@
 
 	switch (param) {
 	case ISCSI_HOST_PARAM_NETDEV_NAME:
-		if (!ihost->netdev)
-			ihost->netdev = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&ihost->netdev, buf);
 	case ISCSI_HOST_PARAM_HWADDRESS:
-		if (!ihost->hwaddress)
-			ihost->hwaddress = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&ihost->hwaddress, buf);
 	case ISCSI_HOST_PARAM_INITIATOR_NAME:
-		if (!ihost->initiatorname)
-			ihost->initiatorname = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&ihost->initiatorname, buf);
 	default:
 		return -ENOSYS;
 	}
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index b579ca9..2bc0709 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -440,8 +440,8 @@
 	struct iscsi_tcp_task *tcp_task = task->dd_data;
 	struct iscsi_r2t_info *r2t;
 
-	/* nothing to do for mgmt or pending tasks */
-	if (!task->sc || task->state == ISCSI_TASK_PENDING)
+	/* nothing to do for mgmt */
+	if (!task->sc)
 		return;
 
 	/* flush task's r2t queues */
@@ -473,7 +473,13 @@
 	int datasn = be32_to_cpu(rhdr->datasn);
 	unsigned total_in_length = scsi_in(task->sc)->length;
 
-	iscsi_update_cmdsn(conn->session, (struct iscsi_nopin*)rhdr);
+	/*
+	 * lib iscsi will update this in the completion handling if there
+	 * is status.
+	 */
+	if (!(rhdr->flags & ISCSI_FLAG_DATA_STATUS))
+		iscsi_update_cmdsn(conn->session, (struct iscsi_nopin*)rhdr);
+
 	if (tcp_conn->in.datalen == 0)
 		return 0;
 
@@ -857,6 +863,12 @@
 	int rc = 0;
 
 	ISCSI_DBG_TCP(conn, "in %d bytes\n", skb->len - offset);
+	/*
+	 * Update for each skb instead of pdu, because over slow networks a
+	 * data_in's data could take a while to read in. We also want to
+	 * account for r2ts.
+	 */
+	conn->last_recv = jiffies;
 
 	if (unlikely(conn->suspend_rx)) {
 		ISCSI_DBG_TCP(conn, "Rx suspended!\n");
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 1105f9a..5405698 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -23,6 +23,13 @@
 
 struct lpfc_sli2_slim;
 
+#define LPFC_PCI_DEV_LP		0x1
+#define LPFC_PCI_DEV_OC		0x2
+
+#define LPFC_SLI_REV2		2
+#define LPFC_SLI_REV3		3
+#define LPFC_SLI_REV4		4
+
 #define LPFC_MAX_TARGET		4096	/* max number of targets supported */
 #define LPFC_MAX_DISC_THREADS	64	/* max outstanding discovery els
 					   requests */
@@ -98,9 +105,11 @@
 };
 
 struct hbq_dmabuf {
+	struct lpfc_dmabuf hbuf;
 	struct lpfc_dmabuf dbuf;
 	uint32_t size;
 	uint32_t tag;
+	struct lpfc_rcqe rcqe;
 };
 
 /* Priority bit.  Set value to exceed low water mark in lpfc_mem. */
@@ -134,7 +143,10 @@
 	} rev;
 	struct {
 #ifdef __BIG_ENDIAN_BITFIELD
-		uint32_t rsvd2  :24;  /* Reserved                             */
+		uint32_t rsvd3  :19;  /* Reserved                             */
+		uint32_t cdss	: 1;  /* Configure Data Security SLI          */
+		uint32_t rsvd2	: 3;  /* Reserved                             */
+		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
@@ -152,7 +164,10 @@
 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
-		uint32_t rsvd2  :24;  /* Reserved                             */
+		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
+		uint32_t rsvd2	: 3;  /* Reserved                             */
+		uint32_t cdss	: 1;  /* Configure Data Security SLI          */
+		uint32_t rsvd3  :19;  /* Reserved                             */
 #endif
 	} sli3Feat;
 } lpfc_vpd_t;
@@ -264,8 +279,8 @@
 };
 
 struct lpfc_vport {
-	struct list_head listentry;
 	struct lpfc_hba *phba;
+	struct list_head listentry;
 	uint8_t port_type;
 #define LPFC_PHYSICAL_PORT 1
 #define LPFC_NPIV_PORT  2
@@ -273,6 +288,9 @@
 	enum discovery_state port_state;
 
 	uint16_t vpi;
+	uint16_t vfi;
+	uint8_t vfi_state;
+#define LPFC_VFI_REGISTERED	0x1
 
 	uint32_t fc_flag;	/* FC flags */
 /* Several of these flags are HBA centric and should be moved to
@@ -385,6 +403,9 @@
 #endif
 	uint8_t stat_data_enabled;
 	uint8_t stat_data_blocked;
+	struct list_head rcv_buffer_list;
+	uint32_t vport_flag;
+#define STATIC_VPORT	1
 };
 
 struct hbq_s {
@@ -420,8 +441,66 @@
 };
 
 struct lpfc_hba {
+	/* SCSI interface function jump table entries */
+	int (*lpfc_new_scsi_buf)
+		(struct lpfc_vport *, int);
+	struct lpfc_scsi_buf * (*lpfc_get_scsi_buf)
+		(struct lpfc_hba *);
+	int (*lpfc_scsi_prep_dma_buf)
+		(struct lpfc_hba *, struct lpfc_scsi_buf *);
+	void (*lpfc_scsi_unprep_dma_buf)
+		(struct lpfc_hba *, struct lpfc_scsi_buf *);
+	void (*lpfc_release_scsi_buf)
+		(struct lpfc_hba *, struct lpfc_scsi_buf *);
+	void (*lpfc_rampdown_queue_depth)
+		(struct lpfc_hba *);
+	void (*lpfc_scsi_prep_cmnd)
+		(struct lpfc_vport *, struct lpfc_scsi_buf *,
+		 struct lpfc_nodelist *);
+	int (*lpfc_scsi_prep_task_mgmt_cmd)
+		(struct lpfc_vport *, struct lpfc_scsi_buf *,
+		 unsigned int, uint8_t);
+
+	/* IOCB interface function jump table entries */
+	int (*__lpfc_sli_issue_iocb)
+		(struct lpfc_hba *, uint32_t,
+		 struct lpfc_iocbq *, uint32_t);
+	void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
+			 struct lpfc_iocbq *);
+	int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
+
+
+	IOCB_t * (*lpfc_get_iocb_from_iocbq)
+		(struct lpfc_iocbq *);
+	void (*lpfc_scsi_cmd_iocb_cmpl)
+		(struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *);
+
+	/* MBOX interface function jump table entries */
+	int (*lpfc_sli_issue_mbox)
+		(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
+	/* Slow-path IOCB process function jump table entries */
+	void (*lpfc_sli_handle_slow_ring_event)
+		(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+		 uint32_t mask);
+	/* INIT device interface function jump table entries */
+	int (*lpfc_sli_hbq_to_firmware)
+		(struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
+	int (*lpfc_sli_brdrestart)
+		(struct lpfc_hba *);
+	int (*lpfc_sli_brdready)
+		(struct lpfc_hba *, uint32_t);
+	void (*lpfc_handle_eratt)
+		(struct lpfc_hba *);
+	void (*lpfc_stop_port)
+		(struct lpfc_hba *);
+
+
+	/* SLI4 specific HBA data structure */
+	struct lpfc_sli4_hba sli4_hba;
+
 	struct lpfc_sli sli;
-	uint32_t sli_rev;		/* SLI2 or SLI3 */
+	uint8_t pci_dev_grp;	/* lpfc PCI dev group: 0x0, 0x1, 0x2,... */
+	uint32_t sli_rev;		/* SLI2, SLI3, or SLI4 */
 	uint32_t sli3_options;		/* Mask of enabled SLI3 options */
 #define LPFC_SLI3_HBQ_ENABLED		0x01
 #define LPFC_SLI3_NPIV_ENABLED		0x02
@@ -429,6 +508,7 @@
 #define LPFC_SLI3_CRP_ENABLED		0x08
 #define LPFC_SLI3_INB_ENABLED		0x10
 #define LPFC_SLI3_BG_ENABLED		0x20
+#define LPFC_SLI3_DSS_ENABLED		0x40
 	uint32_t iocb_cmd_size;
 	uint32_t iocb_rsp_size;
 
@@ -442,8 +522,13 @@
 
 	uint32_t hba_flag;	/* hba generic flags */
 #define HBA_ERATT_HANDLED	0x1 /* This flag is set when eratt handled */
-
-#define DEFER_ERATT		0x4 /* Deferred error attention in progress */
+#define DEFER_ERATT		0x2 /* Deferred error attention in progress */
+#define HBA_FCOE_SUPPORT	0x4 /* HBA function supports FCOE */
+#define HBA_RECEIVE_BUFFER	0x8 /* Rcv buffer posted to worker thread */
+#define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
+#define FCP_XRI_ABORT_EVENT	0x20
+#define ELS_XRI_ABORT_EVENT	0x40
+#define ASYNC_EVENT		0x80
 	struct lpfc_dmabuf slim2p;
 
 	MAILBOX_t *mbox;
@@ -502,6 +587,9 @@
 	uint32_t cfg_poll;
 	uint32_t cfg_poll_tmo;
 	uint32_t cfg_use_msi;
+	uint32_t cfg_fcp_imax;
+	uint32_t cfg_fcp_wq_count;
+	uint32_t cfg_fcp_eq_count;
 	uint32_t cfg_sg_seg_cnt;
 	uint32_t cfg_prot_sg_seg_cnt;
 	uint32_t cfg_sg_dma_buf_size;
@@ -511,6 +599,8 @@
 	uint32_t cfg_enable_hba_reset;
 	uint32_t cfg_enable_hba_heartbeat;
 	uint32_t cfg_enable_bg;
+	uint32_t cfg_enable_fip;
+	uint32_t cfg_log_verbose;
 
 	lpfc_vpd_t vpd;		/* vital product data */
 
@@ -526,11 +616,12 @@
 	unsigned long data_flags;
 
 	uint32_t hbq_in_use;		/* HBQs in use flag */
-	struct list_head hbqbuf_in_list;  /* in-fly hbq buffer list */
+	struct list_head rb_pend_list;  /* Received buffers to be processed */
 	uint32_t hbq_count;	        /* Count of configured HBQs */
 	struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies  */
 
 	unsigned long pci_bar0_map;     /* Physical address for PCI BAR0 */
+	unsigned long pci_bar1_map;     /* Physical address for PCI BAR1 */
 	unsigned long pci_bar2_map;     /* Physical address for PCI BAR2 */
 	void __iomem *slim_memmap_p;	/* Kernel memory mapped address for
 					   PCI BAR0 */
@@ -593,7 +684,8 @@
 	/* pci_mem_pools */
 	struct pci_pool *lpfc_scsi_dma_buf_pool;
 	struct pci_pool *lpfc_mbuf_pool;
-	struct pci_pool *lpfc_hbq_pool;
+	struct pci_pool *lpfc_hrb_pool;	/* header receive buffer pool */
+	struct pci_pool *lpfc_drb_pool; /* data receive buffer pool */
 	struct lpfc_dma_pool lpfc_mbuf_safety_pool;
 
 	mempool_t *mbox_mem_pool;
@@ -609,6 +701,14 @@
 	struct lpfc_vport *pport;	/* physical lpfc_vport pointer */
 	uint16_t max_vpi;		/* Maximum virtual nports */
 #define LPFC_MAX_VPI 0xFFFF		/* Max number of VPI supported */
+	uint16_t max_vports;            /*
+					 * For IOV HBAs max_vpi can change
+					 * after a reset. max_vports is max
+					 * number of vports present. This can
+					 * be greater than max_vpi.
+					 */
+	uint16_t vpi_base;
+	uint16_t vfi_base;
 	unsigned long *vpi_bmask;	/* vpi allocation table */
 
 	/* Data structure used by fabric iocb scheduler */
@@ -667,6 +767,11 @@
 /* Maximum number of events that can be outstanding at any time*/
 #define LPFC_MAX_EVT_COUNT 512
 	atomic_t fast_event_count;
+	struct lpfc_fcf fcf;
+	uint8_t fc_map[3];
+	uint8_t valid_vlan;
+	uint16_t vlan_id;
+	struct list_head fcf_conn_rec_list;
 };
 
 static inline struct Scsi_Host *
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index c14f0cb..d73e677 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -30,8 +30,10 @@
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -505,12 +507,14 @@
 		return -ENOMEM;
 
 	memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
-	pmboxq->mb.mbxCommand = MBX_DOWN_LINK;
-	pmboxq->mb.mbxOwner = OWN_HOST;
+	pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;
+	pmboxq->u.mb.mbxOwner = OWN_HOST;
 
 	mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);
 
-	if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) {
+	if ((mbxstatus == MBX_SUCCESS) &&
+	    (pmboxq->u.mb.mbxStatus == 0 ||
+	     pmboxq->u.mb.mbxStatus == MBXERR_LINK_DOWN)) {
 		memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
 		lpfc_init_link(phba, pmboxq, phba->cfg_topology,
 			       phba->cfg_link_speed);
@@ -789,7 +793,8 @@
 		  uint32_t *mrpi, uint32_t *arpi,
 		  uint32_t *mvpi, uint32_t *avpi)
 {
-	struct lpfc_sli   *psli = &phba->sli;
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_mbx_read_config *rd_config;
 	LPFC_MBOXQ_t *pmboxq;
 	MAILBOX_t *pmb;
 	int rc = 0;
@@ -800,7 +805,7 @@
 	 */
 	if (phba->link_state < LPFC_LINK_DOWN ||
 	    !phba->mbox_mem_pool ||
-	    (phba->sli.sli_flag & LPFC_SLI2_ACTIVE) == 0)
+	    (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
 		return 0;
 
 	if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
@@ -811,13 +816,13 @@
 		return 0;
 	memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
 
-	pmb = &pmboxq->mb;
+	pmb = &pmboxq->u.mb;
 	pmb->mbxCommand = MBX_READ_CONFIG;
 	pmb->mbxOwner = OWN_HOST;
 	pmboxq->context1 = NULL;
 
 	if ((phba->pport->fc_flag & FC_OFFLINE_MODE) ||
-		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+		(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = MBX_NOT_FINISHED;
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -828,18 +833,37 @@
 		return 0;
 	}
 
-	if (mrpi)
-		*mrpi = pmb->un.varRdConfig.max_rpi;
-	if (arpi)
-		*arpi = pmb->un.varRdConfig.avail_rpi;
-	if (mxri)
-		*mxri = pmb->un.varRdConfig.max_xri;
-	if (axri)
-		*axri = pmb->un.varRdConfig.avail_xri;
-	if (mvpi)
-		*mvpi = pmb->un.varRdConfig.max_vpi;
-	if (avpi)
-		*avpi = pmb->un.varRdConfig.avail_vpi;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rd_config = &pmboxq->u.mqe.un.rd_config;
+		if (mrpi)
+			*mrpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+		if (arpi)
+			*arpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.rpi_used;
+		if (mxri)
+			*mxri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+		if (axri)
+			*axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.xri_used;
+		if (mvpi)
+			*mvpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+		if (avpi)
+			*avpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.vpi_used;
+	} else {
+		if (mrpi)
+			*mrpi = pmb->un.varRdConfig.max_rpi;
+		if (arpi)
+			*arpi = pmb->un.varRdConfig.avail_rpi;
+		if (mxri)
+			*mxri = pmb->un.varRdConfig.max_xri;
+		if (axri)
+			*axri = pmb->un.varRdConfig.avail_xri;
+		if (mvpi)
+			*mvpi = pmb->un.varRdConfig.max_vpi;
+		if (avpi)
+			*avpi = pmb->un.varRdConfig.avail_vpi;
+	}
 
 	mempool_free(pmboxq, phba->mbox_mem_pool);
 	return 1;
@@ -2021,22 +2045,9 @@
 # lpfc_log_verbose: Only turn this flag on if you are willing to risk being
 # deluged with LOTS of information.
 # You can set a bit mask to record specific types of verbose messages:
-#
-# LOG_ELS                       0x1        ELS events
-# LOG_DISCOVERY                 0x2        Link discovery events
-# LOG_MBOX                      0x4        Mailbox events
-# LOG_INIT                      0x8        Initialization events
-# LOG_LINK_EVENT                0x10       Link events
-# LOG_FCP                       0x40       FCP traffic history
-# LOG_NODE                      0x80       Node table events
-# LOG_BG                        0x200      BlockBuard events
-# LOG_MISC                      0x400      Miscellaneous events
-# LOG_SLI                       0x800      SLI events
-# LOG_FCP_ERROR                 0x1000     Only log FCP errors
-# LOG_LIBDFC                    0x2000     LIBDFC events
-# LOG_ALL_MSG                   0xffff     LOG all messages
+# See lpfc_logmsh.h for definitions.
 */
-LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffff,
+LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff,
 		       "Verbose logging bit-mask");
 
 /*
@@ -2266,6 +2277,36 @@
 static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
 		lpfc_topology_show, lpfc_topology_store);
 
+/**
+ * lpfc_static_vport_show: Read callback function for
+ *   lpfc_static_vport sysfs file.
+ * @dev: Pointer to class device object.
+ * @attr: device attribute structure.
+ * @buf: Data buffer.
+ *
+ * This function is the read call back function for
+ * lpfc_static_vport sysfs file. The lpfc_static_vport
+ * sysfs file report the mageability of the vport.
+ **/
+static ssize_t
+lpfc_static_vport_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct Scsi_Host  *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	if (vport->vport_flag & STATIC_VPORT)
+		sprintf(buf, "1\n");
+	else
+		sprintf(buf, "0\n");
+
+	return strlen(buf);
+}
+
+/*
+ * Sysfs attribute to control the statistical data collection.
+ */
+static DEVICE_ATTR(lpfc_static_vport, S_IRUGO,
+		   lpfc_static_vport_show, NULL);
 
 /**
  * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file
@@ -2341,7 +2382,7 @@
 		if (vports == NULL)
 			return -ENOMEM;
 
-		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			v_shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(v_shost->host_lock);
 			/* Block and reset data collection */
@@ -2356,7 +2397,7 @@
 		phba->bucket_base = base;
 		phba->bucket_step = step;
 
-		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			v_shost = lpfc_shost_from_vport(vports[i]);
 
 			/* Unblock data collection */
@@ -2373,7 +2414,7 @@
 		if (vports == NULL)
 			return -ENOMEM;
 
-		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			v_shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(shost->host_lock);
 			vports[i]->stat_data_blocked = 1;
@@ -2844,15 +2885,39 @@
 /*
 # lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that
 #		support this feature
-#       0  = MSI disabled
+#       0  = MSI disabled (default)
 #       1  = MSI enabled
-#       2  = MSI-X enabled (default)
-# Value range is [0,2]. Default value is 2.
+#       2  = MSI-X enabled
+# Value range is [0,2]. Default value is 0.
 */
-LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
+LPFC_ATTR_R(use_msi, 0, 0, 2, "Use Message Signaled Interrupts (1) or "
 	    "MSI-X (2), if possible");
 
 /*
+# lpfc_fcp_imax: Set the maximum number of fast-path FCP interrupts per second
+#
+# Value range is [636,651042]. Default value is 10000.
+*/
+LPFC_ATTR_R(fcp_imax, LPFC_FP_DEF_IMAX, LPFC_MIM_IMAX, LPFC_DMULT_CONST,
+	    "Set the maximum number of fast-path FCP interrupts per second");
+
+/*
+# lpfc_fcp_wq_count: Set the number of fast-path FCP work queues
+#
+# Value range is [1,31]. Default value is 4.
+*/
+LPFC_ATTR_R(fcp_wq_count, LPFC_FP_WQN_DEF, LPFC_FP_WQN_MIN, LPFC_FP_WQN_MAX,
+	    "Set the number of fast-path FCP work queues, if possible");
+
+/*
+# lpfc_fcp_eq_count: Set the number of fast-path FCP event queues
+#
+# Value range is [1,7]. Default value is 1.
+*/
+LPFC_ATTR_R(fcp_eq_count, LPFC_FP_EQN_DEF, LPFC_FP_EQN_MIN, LPFC_FP_EQN_MAX,
+	    "Set the number of fast-path FCP event queues, if possible");
+
+/*
 # lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
 #       0  = HBA resets disabled
 #       1  = HBA resets enabled (default)
@@ -2876,6 +2941,14 @@
 */
 LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");
 
+/*
+# lpfc_enable_fip: When set, FIP is required to start discovery. If not
+# set, the driver will add an FCF record manually if the port has no
+# FCF records available and start discovery.
+# Value range is [0,1]. Default value is 1 (enabled)
+*/
+LPFC_ATTR_RW(enable_fip, 0, 0, 1, "Enable FIP Discovery");
+
 
 /*
 # lpfc_prot_mask: i
@@ -2942,6 +3015,7 @@
 	&dev_attr_lpfc_peer_port_login,
 	&dev_attr_lpfc_nodev_tmo,
 	&dev_attr_lpfc_devloss_tmo,
+	&dev_attr_lpfc_enable_fip,
 	&dev_attr_lpfc_fcp_class,
 	&dev_attr_lpfc_use_adisc,
 	&dev_attr_lpfc_ack0,
@@ -2969,6 +3043,9 @@
 	&dev_attr_lpfc_poll,
 	&dev_attr_lpfc_poll_tmo,
 	&dev_attr_lpfc_use_msi,
+	&dev_attr_lpfc_fcp_imax,
+	&dev_attr_lpfc_fcp_wq_count,
+	&dev_attr_lpfc_fcp_eq_count,
 	&dev_attr_lpfc_enable_bg,
 	&dev_attr_lpfc_soft_wwnn,
 	&dev_attr_lpfc_soft_wwpn,
@@ -2991,6 +3068,7 @@
 	&dev_attr_lpfc_lun_queue_depth,
 	&dev_attr_lpfc_nodev_tmo,
 	&dev_attr_lpfc_devloss_tmo,
+	&dev_attr_lpfc_enable_fip,
 	&dev_attr_lpfc_hba_queue_depth,
 	&dev_attr_lpfc_peer_port_login,
 	&dev_attr_lpfc_restrict_login,
@@ -3003,6 +3081,7 @@
 	&dev_attr_lpfc_enable_da_id,
 	&dev_attr_lpfc_max_scsicmpl_time,
 	&dev_attr_lpfc_stat_data_ctrl,
+	&dev_attr_lpfc_static_vport,
 	NULL,
 };
 
@@ -3199,7 +3278,7 @@
 		}
 	}
 
-	memcpy((uint8_t *) & phba->sysfs_mbox.mbox->mb + off,
+	memcpy((uint8_t *) &phba->sysfs_mbox.mbox->u.mb + off,
 	       buf, count);
 
 	phba->sysfs_mbox.offset = off + count;
@@ -3241,6 +3320,7 @@
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
 	int rc;
+	MAILBOX_t *pmb;
 
 	if (off > MAILBOX_CMD_SIZE)
 		return -ERANGE;
@@ -3265,8 +3345,8 @@
 	if (off == 0 &&
 	    phba->sysfs_mbox.state  == SMBOX_WRITING &&
 	    phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) {
-
-		switch (phba->sysfs_mbox.mbox->mb.mbxCommand) {
+		pmb = &phba->sysfs_mbox.mbox->u.mb;
+		switch (pmb->mbxCommand) {
 			/* Offline only */
 		case MBX_INIT_LINK:
 		case MBX_DOWN_LINK:
@@ -3283,7 +3363,7 @@
 			if (!(vport->fc_flag & FC_OFFLINE_MODE)) {
 				printk(KERN_WARNING "mbox_read:Command 0x%x "
 				       "is illegal in on-line state\n",
-				       phba->sysfs_mbox.mbox->mb.mbxCommand);
+				       pmb->mbxCommand);
 				sysfs_mbox_idle(phba);
 				spin_unlock_irq(&phba->hbalock);
 				return -EPERM;
@@ -3319,13 +3399,13 @@
 		case MBX_CONFIG_PORT:
 		case MBX_RUN_BIU_DIAG:
 			printk(KERN_WARNING "mbox_read: Illegal Command 0x%x\n",
-			       phba->sysfs_mbox.mbox->mb.mbxCommand);
+			       pmb->mbxCommand);
 			sysfs_mbox_idle(phba);
 			spin_unlock_irq(&phba->hbalock);
 			return -EPERM;
 		default:
 			printk(KERN_WARNING "mbox_read: Unknown Command 0x%x\n",
-			       phba->sysfs_mbox.mbox->mb.mbxCommand);
+			       pmb->mbxCommand);
 			sysfs_mbox_idle(phba);
 			spin_unlock_irq(&phba->hbalock);
 			return -EPERM;
@@ -3335,14 +3415,14 @@
 		 * or RESTART mailbox commands until the HBA is restarted.
 		 */
 		if (phba->pport->stopped &&
-		    phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_DUMP_MEMORY &&
-		    phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_RESTART &&
-		    phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_VPARMS &&
-		    phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_WWN)
+		    pmb->mbxCommand != MBX_DUMP_MEMORY &&
+		    pmb->mbxCommand != MBX_RESTART &&
+		    pmb->mbxCommand != MBX_WRITE_VPARMS &&
+		    pmb->mbxCommand != MBX_WRITE_WWN)
 			lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
 					"1259 mbox: Issued mailbox cmd "
 					"0x%x while in stopped state.\n",
-					phba->sysfs_mbox.mbox->mb.mbxCommand);
+					pmb->mbxCommand);
 
 		phba->sysfs_mbox.mbox->vport = vport;
 
@@ -3356,7 +3436,7 @@
 		}
 
 		if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-		    (!(phba->sli.sli_flag & LPFC_SLI2_ACTIVE))){
+		    (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))) {
 
 			spin_unlock_irq(&phba->hbalock);
 			rc = lpfc_sli_issue_mbox (phba,
@@ -3368,8 +3448,7 @@
 			spin_unlock_irq(&phba->hbalock);
 			rc = lpfc_sli_issue_mbox_wait (phba,
 						       phba->sysfs_mbox.mbox,
-				lpfc_mbox_tmo_val(phba,
-				    phba->sysfs_mbox.mbox->mb.mbxCommand) * HZ);
+				lpfc_mbox_tmo_val(phba, pmb->mbxCommand) * HZ);
 			spin_lock_irq(&phba->hbalock);
 		}
 
@@ -3391,7 +3470,7 @@
 		return -EAGAIN;
 	}
 
-	memcpy(buf, (uint8_t *) & phba->sysfs_mbox.mbox->mb + off, count);
+	memcpy(buf, (uint8_t *) &pmb + off, count);
 
 	phba->sysfs_mbox.offset = off + count;
 
@@ -3585,6 +3664,9 @@
 			case LA_8GHZ_LINK:
 				fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
 			break;
+			case LA_10GHZ_LINK:
+				fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+			break;
 			default:
 				fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
 			break;
@@ -3652,7 +3734,7 @@
 	 */
 	if (phba->link_state < LPFC_LINK_DOWN ||
 	    !phba->mbox_mem_pool ||
-	    (phba->sli.sli_flag & LPFC_SLI2_ACTIVE) == 0)
+	    (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
 		return NULL;
 
 	if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
@@ -3663,14 +3745,14 @@
 		return NULL;
 	memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
 
-	pmb = &pmboxq->mb;
+	pmb = &pmboxq->u.mb;
 	pmb->mbxCommand = MBX_READ_STATUS;
 	pmb->mbxOwner = OWN_HOST;
 	pmboxq->context1 = NULL;
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+		(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3695,7 +3777,7 @@
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-	    (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+	    (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3769,7 +3851,7 @@
 		return;
 	memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
 
-	pmb = &pmboxq->mb;
+	pmb = &pmboxq->u.mb;
 	pmb->mbxCommand = MBX_READ_STATUS;
 	pmb->mbxOwner = OWN_HOST;
 	pmb->un.varWords[0] = 0x1; /* reset request */
@@ -3777,7 +3859,7 @@
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+		(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3795,7 +3877,7 @@
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-	    (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+	    (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3962,6 +4044,21 @@
 		lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0);
 }
 
+/**
+ * lpfc_hba_log_verbose_init - Set hba's log verbose level
+ * @phba: Pointer to lpfc_hba struct.
+ *
+ * This function is called by the lpfc_get_cfgparam() routine to set the
+ * module lpfc_log_verbose into the @phba cfg_log_verbose for use with
+ * log messsage according to the module's lpfc_log_verbose parameter setting
+ * before hba port or vport created.
+ **/
+static void
+lpfc_hba_log_verbose_init(struct lpfc_hba *phba, uint32_t verbose)
+{
+	phba->cfg_log_verbose = verbose;
+}
+
 struct fc_function_template lpfc_transport_functions = {
 	/* fixed attributes the driver supports */
 	.show_host_node_name = 1,
@@ -4105,6 +4202,9 @@
 	lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
 	lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
 	lpfc_use_msi_init(phba, lpfc_use_msi);
+	lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
+	lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count);
+	lpfc_fcp_eq_count_init(phba, lpfc_fcp_eq_count);
 	lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
 	lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
 	lpfc_enable_bg_init(phba, lpfc_enable_bg);
@@ -4113,26 +4213,10 @@
 	phba->cfg_soft_wwpn = 0L;
 	lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
 	lpfc_prot_sg_seg_cnt_init(phba, lpfc_prot_sg_seg_cnt);
-	/*
-	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
-	 * used to create the sg_dma_buf_pool must be dynamically calculated.
-	 * 2 segments are added since the IOCB needs a command and response bde.
-	 */
-	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
-			sizeof(struct fcp_rsp) +
-			((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
-
-	if (phba->cfg_enable_bg) {
-		phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
-		phba->cfg_sg_dma_buf_size +=
-			phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
-	}
-
-	/* Also reinitialize the host templates with new values. */
-	lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
-	lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
-
 	lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
+	lpfc_enable_fip_init(phba, lpfc_enable_fip);
+	lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
+
 	return;
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index f88ce3f..d2a9229 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -23,6 +23,8 @@
 struct fc_rport;
 void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
 void lpfc_dump_wakeup_param(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_dump_static_vport(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
+int lpfc_dump_fcoe_param(struct lpfc_hba *, struct lpfcMboxq *);
 void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 
@@ -35,17 +37,19 @@
 int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int);
 void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_reg_login(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
-		   LPFC_MBOXQ_t *, uint32_t);
+int lpfc_reg_rpi(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
+		 LPFC_MBOXQ_t *, uint32_t);
 void lpfc_unreg_login(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
 void lpfc_unreg_did(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
-void lpfc_reg_vpi(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
+void lpfc_reg_vpi(struct lpfc_vport *, LPFC_MBOXQ_t *);
 void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *);
 void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
+void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
 
 struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
 void lpfc_cleanup_rpis(struct lpfc_vport *, int);
 int lpfc_linkdown(struct lpfc_hba *);
+void lpfc_linkdown_port(struct lpfc_vport *);
 void lpfc_port_link_failure(struct lpfc_vport *);
 void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
 
@@ -54,6 +58,7 @@
 void lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_enqueue_node(struct lpfc_vport *, struct lpfc_nodelist *);
 void lpfc_dequeue_node(struct lpfc_vport *, struct lpfc_nodelist *);
 struct lpfc_nodelist *lpfc_enable_node(struct lpfc_vport *,
@@ -105,6 +110,7 @@
 int lpfc_issue_els_logo(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
 int lpfc_issue_els_npiv_logo(struct lpfc_vport *, struct lpfc_nodelist *);
 int lpfc_issue_els_scr(struct lpfc_vport *, uint32_t, uint8_t);
+int lpfc_issue_fabric_reglogin(struct lpfc_vport *);
 int lpfc_els_free_iocb(struct lpfc_hba *, struct lpfc_iocbq *);
 int lpfc_ct_free_iocb(struct lpfc_hba *, struct lpfc_iocbq *);
 int lpfc_els_rsp_acc(struct lpfc_vport *, uint32_t, struct lpfc_iocbq *,
@@ -149,15 +155,19 @@
 void lpfc_unblock_mgmt_io(struct lpfc_hba *);
 void lpfc_offline_prep(struct lpfc_hba *);
 void lpfc_offline(struct lpfc_hba *);
+void lpfc_reset_hba(struct lpfc_hba *);
 
 int lpfc_sli_setup(struct lpfc_hba *);
 int lpfc_sli_queue_setup(struct lpfc_hba *);
 
 void lpfc_handle_eratt(struct lpfc_hba *);
 void lpfc_handle_latt(struct lpfc_hba *);
-irqreturn_t lpfc_intr_handler(int, void *);
-irqreturn_t lpfc_sp_intr_handler(int, void *);
-irqreturn_t lpfc_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_intr_handler(int, void *);
+irqreturn_t lpfc_sli_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_fp_intr_handler(int, void *);
 
 void lpfc_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_config_ring(struct lpfc_hba *, int, LPFC_MBOXQ_t *);
@@ -165,16 +175,32 @@
 void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *);
+void __lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_cmd_check(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_dev_check(struct lpfc_hba *);
 int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
+void lpfc_init_vfi(struct lpfcMboxq *, struct lpfc_vport *);
+void lpfc_reg_vfi(struct lpfcMboxq *, struct lpfc_vport *, dma_addr_t);
+void lpfc_init_vpi(struct lpfcMboxq *, uint16_t);
+void lpfc_unreg_vfi(struct lpfcMboxq *, uint16_t);
+void lpfc_reg_fcfi(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_unreg_fcfi(struct lpfcMboxq *, uint16_t);
+void lpfc_resume_rpi(struct lpfcMboxq *, struct lpfc_nodelist *);
 
 void lpfc_config_hbq(struct lpfc_hba *, uint32_t, struct lpfc_hbq_init *,
 	uint32_t , LPFC_MBOXQ_t *);
 struct hbq_dmabuf *lpfc_els_hbq_alloc(struct lpfc_hba *);
 void lpfc_els_hbq_free(struct lpfc_hba *, struct hbq_dmabuf *);
+struct hbq_dmabuf *lpfc_sli4_rb_alloc(struct lpfc_hba *);
+void lpfc_sli4_rb_free(struct lpfc_hba *, struct hbq_dmabuf *);
+void lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *, struct fcf_record *,
+			uint16_t);
+void lpfc_unregister_unused_fcf(struct lpfc_hba *);
 
-int lpfc_mem_alloc(struct lpfc_hba *);
+int lpfc_mem_alloc(struct lpfc_hba *, int align);
 void lpfc_mem_free(struct lpfc_hba *);
+void lpfc_mem_free_all(struct lpfc_hba *);
 void lpfc_stop_vport_timers(struct lpfc_vport *);
 
 void lpfc_poll_timeout(unsigned long ptr);
@@ -186,6 +212,7 @@
 uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
 void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
 			   uint32_t);
+void lpfc_sli_wake_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *);
 
 void lpfc_reset_barrier(struct lpfc_hba * phba);
 int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
@@ -198,12 +225,13 @@
 int lpfc_sli_hba_down(struct lpfc_hba *);
 int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 int lpfc_sli_handle_mb_event(struct lpfc_hba *);
-int lpfc_sli_flush_mbox_queue(struct lpfc_hba *);
+void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *);
 int lpfc_sli_check_eratt(struct lpfc_hba *);
-int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
+void lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
 				    struct lpfc_sli_ring *, uint32_t);
+int lpfc_sli4_handle_received_buffer(struct lpfc_hba *);
 void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_sli_issue_iocb(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
 			struct lpfc_iocbq *, uint32_t);
 void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t);
 void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *);
@@ -237,7 +265,7 @@
 
 int lpfc_sli_issue_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 
-int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, uint32_t,
 			     struct lpfc_iocbq *, struct lpfc_iocbq *,
 			     uint32_t);
 void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *, struct lpfc_iocbq *,
@@ -254,6 +282,12 @@
 const char* lpfc_info(struct Scsi_Host *);
 int lpfc_scan_finished(struct Scsi_Host *, unsigned long);
 
+int lpfc_init_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_sli_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_scsi_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_mbox_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_api_table_setup(struct lpfc_hba *, uint8_t);
+
 void lpfc_get_cfgparam(struct lpfc_hba *);
 void lpfc_get_vport_cfgparam(struct lpfc_vport *);
 int lpfc_alloc_sysfs_attr(struct lpfc_vport *);
@@ -314,8 +348,15 @@
 				struct lpfc_iocbq *);
 struct lpfc_fast_path_event *lpfc_alloc_fast_evt(struct lpfc_hba *);
 void lpfc_free_fast_evt(struct lpfc_hba *, struct lpfc_fast_path_event *);
+void lpfc_create_static_vport(struct lpfc_hba *);
+void lpfc_stop_hba_timers(struct lpfc_hba *);
+void lpfc_stop_port(struct lpfc_hba *);
+void lpfc_parse_fcoe_conf(struct lpfc_hba *, uint8_t *, uint32_t);
+int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
+void lpfc_start_fdiscs(struct lpfc_hba *phba);
 
 #define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
 #define HBA_EVENT_RSCN                   5
 #define HBA_EVENT_LINK_UP                2
 #define HBA_EVENT_LINK_DOWN              3
+
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 896c7b0..1dbccfd 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -32,8 +32,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -267,8 +269,6 @@
 	     uint32_t tmo, uint8_t retry)
 {
 	struct lpfc_hba  *phba = vport->phba;
-	struct lpfc_sli  *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	IOCB_t *icmd;
 	struct lpfc_iocbq *geniocb;
 	int rc;
@@ -331,7 +331,7 @@
 	geniocb->drvrTimeout = icmd->ulpTimeout + LPFC_DRVR_TIMEOUT;
 	geniocb->vport = vport;
 	geniocb->retry = retry;
-	rc = lpfc_sli_issue_iocb(phba, pring, geniocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, geniocb, 0);
 
 	if (rc == IOCB_ERROR) {
 		lpfc_sli_release_iocbq(phba, geniocb);
@@ -1578,6 +1578,9 @@
 				case LA_8GHZ_LINK:
 					ae->un.PortSpeed = HBA_PORTSPEED_8GBIT;
 				break;
+				case LA_10GHZ_LINK:
+					ae->un.PortSpeed = HBA_PORTSPEED_10GBIT;
+				break;
 				default:
 					ae->un.PortSpeed =
 						HBA_PORTSPEED_UNKNOWN;
@@ -1730,7 +1733,7 @@
 	uint8_t *fwname;
 
 	if (vp->rev.rBit) {
-		if (psli->sli_flag & LPFC_SLI2_ACTIVE)
+		if (psli->sli_flag & LPFC_SLI_ACTIVE)
 			rev = vp->rev.sli2FwRev;
 		else
 			rev = vp->rev.sli1FwRev;
@@ -1756,7 +1759,7 @@
 		}
 		b4 = (rev & 0x0000000f);
 
-		if (psli->sli_flag & LPFC_SLI2_ACTIVE)
+		if (psli->sli_flag & LPFC_SLI_ACTIVE)
 			fwname = vp->rev.sli2FwName;
 		else
 			fwname = vp->rev.sli1FwName;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 52be564..2b02b1f 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2007-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2007-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -33,8 +33,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -280,6 +282,8 @@
 	struct lpfc_dmabuf *d_buf;
 	struct hbq_dmabuf *hbq_buf;
 
+	if (phba->sli_rev != 3)
+		return 0;
 	cnt = LPFC_HBQINFO_SIZE;
 	spin_lock_irq(&phba->hbalock);
 
@@ -489,12 +493,15 @@
 				 pring->next_cmdidx, pring->local_getidx,
 				 pring->flag, pgpp->rspPutInx, pring->numRiocb);
 	}
-	word0 = readl(phba->HAregaddr);
-	word1 = readl(phba->CAregaddr);
-	word2 = readl(phba->HSregaddr);
-	word3 = readl(phba->HCregaddr);
-	len +=  snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x HC:%08x\n",
-	word0, word1, word2, word3);
+
+	if (phba->sli_rev <= LPFC_SLI_REV3) {
+		word0 = readl(phba->HAregaddr);
+		word1 = readl(phba->CAregaddr);
+		word2 = readl(phba->HSregaddr);
+		word3 = readl(phba->HCregaddr);
+		len +=  snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x "
+				 "HC:%08x\n", word0, word1, word2, word3);
+	}
 	spin_unlock_irq(&phba->hbalock);
 	return len;
 }
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index ffd1089..1142070 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -135,6 +135,7 @@
 #define NLP_NODEV_REMOVE   0x08000000	/* Defer removal till discovery ends */
 #define NLP_TARGET_REMOVE  0x10000000   /* Target remove in process */
 #define NLP_SC_REQ         0x20000000	/* Target requires authentication */
+#define NLP_RPI_VALID      0x80000000	/* nlp_rpi is valid */
 
 /* ndlp usage management macros */
 #define NLP_CHK_NODE_ACT(ndlp)		(((ndlp)->nlp_usg_map \
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b8b34cf..6bdeb14 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -28,8 +28,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -84,7 +86,8 @@
 	uint32_t ha_copy;
 
 	if (vport->port_state >= LPFC_VPORT_READY ||
-	    phba->link_state == LPFC_LINK_DOWN)
+	    phba->link_state == LPFC_LINK_DOWN ||
+	    phba->sli_rev > LPFC_SLI_REV3)
 		return 0;
 
 	/* Read the HBA Host Attention Register */
@@ -219,7 +222,7 @@
 		icmd->un.elsreq64.myID = vport->fc_myDID;
 
 		/* For ELS_REQUEST64_CR, use the VPI by default */
-		icmd->ulpContext = vport->vpi;
+		icmd->ulpContext = vport->vpi + phba->vpi_base;
 		icmd->ulpCt_h = 0;
 		/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
 		if (elscmd == ELS_CMD_ECHO)
@@ -305,7 +308,7 @@
  *   0 - successfully issued fabric registration login for @vport
  *   -ENXIO -- failed to issue fabric registration login for @vport
  **/
-static int
+int
 lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
 {
 	struct lpfc_hba  *phba = vport->phba;
@@ -345,8 +348,7 @@
 		err = 4;
 		goto fail;
 	}
-	rc = lpfc_reg_login(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox,
-			    0);
+	rc = lpfc_reg_rpi(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox, 0);
 	if (rc) {
 		err = 5;
 		goto fail_free_mbox;
@@ -386,6 +388,75 @@
 }
 
 /**
+ * lpfc_issue_reg_vfi - Register VFI for this vport's fabric login
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine issues a REG_VFI mailbox for the vfi, vpi, fcfi triplet for
+ * the @vport. This mailbox command is necessary for FCoE only.
+ *
+ * Return code
+ *   0 - successfully issued REG_VFI for @vport
+ *   A failure code otherwise.
+ **/
+static int
+lpfc_issue_reg_vfi(struct lpfc_vport *vport)
+{
+	struct lpfc_hba  *phba = vport->phba;
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_nodelist *ndlp;
+	struct serv_parm *sp;
+	struct lpfc_dmabuf *dmabuf;
+	int rc = 0;
+
+	sp = &phba->fc_fabparam;
+	ndlp = lpfc_findnode_did(vport, Fabric_DID);
+	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
+		rc = -ENODEV;
+		goto fail;
+	}
+
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf) {
+		rc = -ENOMEM;
+		goto fail;
+	}
+	dmabuf->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &dmabuf->phys);
+	if (!dmabuf->virt) {
+		rc = -ENOMEM;
+		goto fail_free_dmabuf;
+	}
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		rc = -ENOMEM;
+		goto fail_free_coherent;
+	}
+	vport->port_state = LPFC_FABRIC_CFG_LINK;
+	memcpy(dmabuf->virt, &phba->fc_fabparam, sizeof(vport->fc_sparam));
+	lpfc_reg_vfi(mboxq, vport, dmabuf->phys);
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_reg_vfi;
+	mboxq->vport = vport;
+	mboxq->context1 = dmabuf;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		rc = -ENXIO;
+		goto fail_free_mbox;
+	}
+	return 0;
+
+fail_free_mbox:
+	mempool_free(mboxq, phba->mbox_mem_pool);
+fail_free_coherent:
+	lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+fail_free_dmabuf:
+	kfree(dmabuf);
+fail:
+	lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+	lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+		"0289 Issue Register VFI failed: Err %d\n", rc);
+	return rc;
+}
+
+/**
  * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
  * @vport: pointer to a host virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -497,17 +568,24 @@
 		}
 	}
 
-	lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
-
-	if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
-	    vport->fc_flag & FC_VPORT_NEEDS_REG_VPI) {
-		lpfc_register_new_vport(phba, vport, ndlp);
-		return 0;
+	if (phba->sli_rev < LPFC_SLI_REV4) {
+		lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
+		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
+		    vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)
+			lpfc_register_new_vport(phba, vport, ndlp);
+		else
+			lpfc_issue_fabric_reglogin(vport);
+	} else {
+		ndlp->nlp_type |= NLP_FABRIC;
+		lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
+		if (vport->vfi_state & LPFC_VFI_REGISTERED) {
+			lpfc_start_fdiscs(phba);
+			lpfc_do_scr_ns_plogi(phba, vport);
+		} else
+			lpfc_issue_reg_vfi(vport);
 	}
-	lpfc_issue_fabric_reglogin(vport);
 	return 0;
 }
-
 /**
  * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port
  * @vport: pointer to a host virtual N_Port data structure.
@@ -815,9 +893,14 @@
 	if (sp->cmn.fcphHigh < FC_PH3)
 		sp->cmn.fcphHigh = FC_PH3;
 
-	if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
+	if  (phba->sli_rev == LPFC_SLI_REV4) {
+		elsiocb->iocb.ulpCt_h = ((SLI4_CT_FCFI >> 1) & 1);
+		elsiocb->iocb.ulpCt_l = (SLI4_CT_FCFI & 1);
+		/* FLOGI needs to be 3 for WQE FCFI */
+		/* Set the fcfi to the fcfi we registered with */
+		elsiocb->iocb.ulpContext = phba->fcf.fcfi;
+	} else if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
 		sp->cmn.request_multiple_Nport = 1;
-
 		/* For FLOGI, Let FLOGI rsp set the NPortID for VPI 0 */
 		icmd->ulpCt_h = 1;
 		icmd->ulpCt_l = 0;
@@ -930,6 +1013,8 @@
 		if (!ndlp)
 			return 0;
 		lpfc_nlp_init(vport, ndlp, Fabric_DID);
+		/* Set the node type */
+		ndlp->nlp_type |= NLP_FABRIC;
 		/* Put ndlp onto node list */
 		lpfc_enqueue_node(vport, ndlp);
 	} else if (!NLP_CHK_NODE_ACT(ndlp)) {
@@ -1350,14 +1435,12 @@
 	IOCB_t *icmd;
 	struct lpfc_nodelist *ndlp;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int ret;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 
 	ndlp = lpfc_findnode_did(vport, did);
 	if (ndlp && !NLP_CHK_NODE_ACT(ndlp))
@@ -1391,7 +1474,7 @@
 
 	phba->fc_stat.elsXmitPLOGI++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_plogi;
-	ret = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 
 	if (ret == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -1501,14 +1584,9 @@
 	PRLI *npr;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 
-	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
-
 	cmdsize = (sizeof(uint32_t) + sizeof(PRLI));
 	elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
 				     ndlp->nlp_DID, ELS_CMD_PRLI);
@@ -1550,7 +1628,8 @@
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_PRLI_SND;
 	spin_unlock_irq(shost->host_lock);
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_PRLI_SND;
 		spin_unlock_irq(shost->host_lock);
@@ -1608,7 +1687,8 @@
 	 * and continue discovery.
 	 */
 	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
-	    !(vport->fc_flag & FC_RSCN_MODE)) {
+	    !(vport->fc_flag & FC_RSCN_MODE) &&
+	    (phba->sli_rev < LPFC_SLI_REV4)) {
 		lpfc_issue_reg_vpi(phba, vport);
 		return;
 	}
@@ -1788,8 +1868,6 @@
 	ADISC *ap;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 
@@ -1822,7 +1900,8 @@
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_ADISC_SND;
 	spin_unlock_irq(shost->host_lock);
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_ADISC_SND;
 		spin_unlock_irq(shost->host_lock);
@@ -1937,15 +2016,10 @@
 	struct lpfc_hba  *phba = vport->phba;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
-	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];
-
 	spin_lock_irq(shost->host_lock);
 	if (ndlp->nlp_flag & NLP_LOGO_SND) {
 		spin_unlock_irq(shost->host_lock);
@@ -1978,7 +2052,7 @@
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_LOGO_SND;
 	spin_unlock_irq(shost->host_lock);
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 
 	if (rc == IOCB_ERROR) {
 		spin_lock_irq(shost->host_lock);
@@ -2058,14 +2132,12 @@
 	struct lpfc_hba  *phba = vport->phba;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	struct lpfc_nodelist *ndlp;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 	cmdsize = (sizeof(uint32_t) + sizeof(SCR));
 
 	ndlp = lpfc_findnode_did(vport, nportid);
@@ -2108,7 +2180,8 @@
 
 	phba->fc_stat.elsXmitSCR++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		/* The additional lpfc_nlp_put will cause the following
 		 * lpfc_els_free_iocb routine to trigger the rlease of
 		 * the node.
@@ -2152,7 +2225,6 @@
 	struct lpfc_hba  *phba = vport->phba;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	FARP *fp;
 	uint8_t *pcmd;
@@ -2162,7 +2234,6 @@
 	struct lpfc_nodelist *ndlp;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 	cmdsize = (sizeof(uint32_t) + sizeof(FARP));
 
 	ndlp = lpfc_findnode_did(vport, nportid);
@@ -2219,7 +2290,8 @@
 
 	phba->fc_stat.elsXmitFARPR++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		/* The additional lpfc_nlp_put will cause the following
 		 * lpfc_els_free_iocb routine to trigger the release of
 		 * the node.
@@ -2949,6 +3021,14 @@
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
 
+	/*
+	 * This routine is used to register and unregister in previous SLI
+	 * modes.
+	 */
+	if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
+	    (phba->sli_rev == LPFC_SLI_REV4))
+		lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
+
 	pmb->context1 = NULL;
 	lpfc_mbuf_free(phba, mp->virt, mp->phys);
 	kfree(mp);
@@ -2961,6 +3041,7 @@
 		 */
 		lpfc_nlp_not_used(ndlp);
 	}
+
 	return;
 }
 
@@ -3170,7 +3251,6 @@
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
@@ -3178,7 +3258,6 @@
 	ELS_PKT *els_pkt_ptr;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 	oldcmd = &oldiocb->iocb;
 
 	switch (flag) {
@@ -3266,7 +3345,7 @@
 	}
 
 	phba->fc_stat.elsXmitACC++;
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
@@ -3305,15 +3384,12 @@
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
-
 	cmdsize = 2 * sizeof(uint32_t);
 	elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
 				     ndlp->nlp_DID, ELS_CMD_LS_RJT);
@@ -3346,7 +3422,7 @@
 
 	phba->fc_stat.elsXmitLSRJT++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -3379,8 +3455,6 @@
 		       struct lpfc_nodelist *ndlp)
 {
 	struct lpfc_hba  *phba = vport->phba;
-	struct lpfc_sli  *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	ADISC *ap;
 	IOCB_t *icmd, *oldcmd;
 	struct lpfc_iocbq *elsiocb;
@@ -3422,7 +3496,7 @@
 
 	phba->fc_stat.elsXmitACC++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
@@ -3459,14 +3533,12 @@
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 
 	cmdsize = sizeof(uint32_t) + sizeof(PRLI);
 	elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
@@ -3520,7 +3592,7 @@
 	phba->fc_stat.elsXmitACC++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
@@ -3562,15 +3634,12 @@
 	RNID *rn;
 	IOCB_t *icmd, *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];
-
 	cmdsize = sizeof(uint32_t) + sizeof(uint32_t)
 					+ (2 * sizeof(struct lpfc_name));
 	if (format)
@@ -3626,7 +3695,7 @@
 	elsiocb->context1 = NULL;  /* Don't need ndlp for cmpl,
 				    * it could be freed */
 
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
@@ -3839,7 +3908,9 @@
 			payload_len -= sizeof(uint32_t);
 			switch (rscn_did.un.b.resv & RSCN_ADDRESS_FORMAT_MASK) {
 			case RSCN_ADDRESS_FORMAT_PORT:
-				if (ns_did.un.word == rscn_did.un.word)
+				if ((ns_did.un.b.domain == rscn_did.un.b.domain)
+				    && (ns_did.un.b.area == rscn_did.un.b.area)
+				    && (ns_did.un.b.id == rscn_did.un.b.id))
 					goto return_did_out;
 				break;
 			case RSCN_ADDRESS_FORMAT_AREA:
@@ -4300,7 +4371,7 @@
 			lpfc_init_link(phba, mbox,
 				       phba->cfg_topology,
 				       phba->cfg_link_speed);
-			mbox->mb.un.varInitLnk.lipsr_AL_PA = 0;
+			mbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
 			mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 			mbox->vport = vport;
 			rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
@@ -4440,8 +4511,6 @@
 static void
 lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	MAILBOX_t *mb;
 	IOCB_t *icmd;
 	RPS_RSP *rps_rsp;
@@ -4451,7 +4520,7 @@
 	uint16_t xri, status;
 	uint32_t cmdsize;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 
 	ndlp = (struct lpfc_nodelist *) pmb->context2;
 	xri = (uint16_t) ((unsigned long)(pmb->context1));
@@ -4507,7 +4576,7 @@
 			 ndlp->nlp_rpi);
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	phba->fc_stat.elsXmitACC++;
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR)
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) == IOCB_ERROR)
 		lpfc_els_free_iocb(phba, elsiocb);
 	return;
 }
@@ -4616,8 +4685,6 @@
 	IOCB_t *icmd, *oldcmd;
 	RPL_RSP rpl_rsp;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	uint8_t *pcmd;
 
 	elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
@@ -4654,7 +4721,8 @@
 			 ndlp->nlp_rpi);
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	phba->fc_stat.elsXmitACC++;
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
 	}
@@ -4883,7 +4951,10 @@
 		} else {
 			/* FAN verified - skip FLOGI */
 			vport->fc_myDID = vport->fc_prevDID;
-			lpfc_issue_fabric_reglogin(vport);
+			if (phba->sli_rev < LPFC_SLI_REV4)
+				lpfc_issue_fabric_reglogin(vport);
+			else
+				lpfc_issue_reg_vfi(vport);
 		}
 	}
 	return 0;
@@ -5566,11 +5637,10 @@
 
 dropit:
 	if (vport && !(vport->load_flag & FC_UNLOADING))
-		lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
-			"(%d):0111 Dropping received ELS cmd "
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+			"0111 Dropping received ELS cmd "
 			"Data: x%x x%x x%x\n",
-			vport->vpi, icmd->ulpStatus,
-			icmd->un.ulpWord[4], icmd->ulpTimeout);
+			icmd->ulpStatus, icmd->un.ulpWord[4], icmd->ulpTimeout);
 	phba->fc_stat.elsRcvDrop++;
 }
 
@@ -5646,10 +5716,9 @@
 	     icmd->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) {
 		if (icmd->unsli3.rcvsli3.vpi == 0xffff)
 			vport = phba->pport;
-		else {
-			uint16_t vpi = icmd->unsli3.rcvsli3.vpi;
-			vport = lpfc_find_vport_by_vpid(phba, vpi);
-		}
+		else
+			vport = lpfc_find_vport_by_vpid(phba,
+				icmd->unsli3.rcvsli3.vpi - phba->vpi_base);
 	}
 	/* If there are no BDEs associated
 	 * with this IOCB, there is nothing to do.
@@ -5781,7 +5850,7 @@
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 
 	spin_lock_irq(shost->host_lock);
 	vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
@@ -5818,7 +5887,10 @@
 
 	} else {
 		if (vport == phba->pport)
-			lpfc_issue_fabric_reglogin(vport);
+			if (phba->sli_rev < LPFC_SLI_REV4)
+				lpfc_issue_fabric_reglogin(vport);
+			else
+				lpfc_issue_reg_vfi(vport);
 		else
 			lpfc_do_scr_ns_plogi(phba, vport);
 	}
@@ -5850,7 +5922,7 @@
 
 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (mbox) {
-		lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, mbox);
+		lpfc_reg_vpi(vport, mbox);
 		mbox->vport = vport;
 		mbox->context2 = lpfc_nlp_get(ndlp);
 		mbox->mbox_cmpl = lpfc_cmpl_reg_new_vport;
@@ -6139,7 +6211,6 @@
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_hba  *phba = vport->phba;
-	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
 	uint8_t *pcmd;
@@ -6169,7 +6240,8 @@
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_LOGO_SND;
 	spin_unlock_irq(shost->host_lock);
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_LOGO_SND;
 		spin_unlock_irq(shost->host_lock);
@@ -6224,7 +6296,6 @@
 	struct lpfc_iocbq *iocb;
 	unsigned long iflags;
 	int ret;
-	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
 	IOCB_t *cmd;
 
 repeat:
@@ -6248,7 +6319,7 @@
 			"Fabric sched1:   ste:x%x",
 			iocb->vport->port_state, 0, 0);
 
-		ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+		ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
 
 		if (ret == IOCB_ERROR) {
 			iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
@@ -6394,7 +6465,6 @@
 lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
 {
 	unsigned long iflags;
-	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
 	int ready;
 	int ret;
 
@@ -6418,7 +6488,7 @@
 			"Fabric sched2:   ste:x%x",
 			iocb->vport->port_state, 0, 0);
 
-		ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+		ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
 
 		if (ret == IOCB_ERROR) {
 			iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
@@ -6524,3 +6594,38 @@
 	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
 			      IOERR_SLI_ABORTED);
 }
+
+/**
+ * lpfc_sli4_els_xri_aborted - Slow-path process of els xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the els xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 slow-path
+ * ELS aborted xri.
+ **/
+void
+lpfc_sli4_els_xri_aborted(struct lpfc_hba *phba,
+			  struct sli4_wcqe_xri_aborted *axri)
+{
+	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+	unsigned long iflag = 0;
+
+	spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+	list_for_each_entry_safe(sglq_entry, sglq_next,
+			&phba->sli4_hba.lpfc_abts_els_sgl_list, list) {
+		if (sglq_entry->sli4_xritag == xri) {
+			list_del(&sglq_entry->list);
+			spin_unlock_irqrestore(
+					&phba->sli4_hba.abts_sgl_list_lock,
+					 iflag);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+
+			list_add_tail(&sglq_entry->list,
+				&phba->sli4_hba.lpfc_sgl_list);
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index e764ce0..35c41ae 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -29,10 +29,12 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_scsi.h"
 #include "lpfc.h"
 #include "lpfc_logmsg.h"
@@ -273,6 +275,8 @@
 	    !(ndlp->nlp_flag & NLP_NPR_2B_DISC) &&
 	    (ndlp->nlp_state != NLP_STE_UNMAPPED_NODE))
 		lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM);
+
+	lpfc_unregister_unused_fcf(phba);
 }
 
 /**
@@ -295,10 +299,11 @@
 
 	ret = kzalloc(sizeof(struct lpfc_fast_path_event),
 			GFP_ATOMIC);
-	if (ret)
+	if (ret) {
 		atomic_inc(&phba->fast_event_count);
-	INIT_LIST_HEAD(&ret->work_evt.evt_listp);
-	ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
+		INIT_LIST_HEAD(&ret->work_evt.evt_listp);
+		ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
+	}
 	return ret;
 }
 
@@ -491,6 +496,10 @@
 	phba->work_ha = 0;
 	spin_unlock_irq(&phba->hbalock);
 
+	/* First, try to post the next mailbox command to SLI4 device */
+	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
+		lpfc_sli4_post_async_mbox(phba);
+
 	if (ha_copy & HA_ERATT)
 		/* Handle the error attention event */
 		lpfc_handle_eratt(phba);
@@ -501,9 +510,27 @@
 	if (ha_copy & HA_LATT)
 		lpfc_handle_latt(phba);
 
+	/* Process SLI4 events */
+	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
+		if (phba->hba_flag & FCP_XRI_ABORT_EVENT)
+			lpfc_sli4_fcp_xri_abort_event_proc(phba);
+		if (phba->hba_flag & ELS_XRI_ABORT_EVENT)
+			lpfc_sli4_els_xri_abort_event_proc(phba);
+		if (phba->hba_flag & ASYNC_EVENT)
+			lpfc_sli4_async_event_proc(phba);
+		if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) {
+			spin_lock_irq(&phba->hbalock);
+			phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER;
+			spin_unlock_irq(&phba->hbalock);
+			lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
+		}
+		if (phba->hba_flag & HBA_RECEIVE_BUFFER)
+			lpfc_sli4_handle_received_buffer(phba);
+	}
+
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi; i++) {
+		for (i = 0; i <= phba->max_vports; i++) {
 			/*
 			 * We could have no vports in array if unloading, so if
 			 * this happens then just use the pport
@@ -555,23 +582,24 @@
 		/*
 		 * Turn on Ring interrupts
 		 */
-		spin_lock_irq(&phba->hbalock);
-		control = readl(phba->HCregaddr);
-		if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
-			lpfc_debugfs_slow_ring_trc(phba,
-				"WRK Enable ring: cntl:x%x hacopy:x%x",
-				control, ha_copy, 0);
+		if (phba->sli_rev <= LPFC_SLI_REV3) {
+			spin_lock_irq(&phba->hbalock);
+			control = readl(phba->HCregaddr);
+			if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
+				lpfc_debugfs_slow_ring_trc(phba,
+					"WRK Enable ring: cntl:x%x hacopy:x%x",
+					control, ha_copy, 0);
 
-			control |= (HC_R0INT_ENA << LPFC_ELS_RING);
-			writel(control, phba->HCregaddr);
-			readl(phba->HCregaddr); /* flush */
+				control |= (HC_R0INT_ENA << LPFC_ELS_RING);
+				writel(control, phba->HCregaddr);
+				readl(phba->HCregaddr); /* flush */
+			} else {
+				lpfc_debugfs_slow_ring_trc(phba,
+					"WRK Ring ok:     cntl:x%x hacopy:x%x",
+					control, ha_copy, 0);
+			}
+			spin_unlock_irq(&phba->hbalock);
 		}
-		else {
-			lpfc_debugfs_slow_ring_trc(phba,
-				"WRK Ring ok:     cntl:x%x hacopy:x%x",
-				control, ha_copy, 0);
-		}
-		spin_unlock_irq(&phba->hbalock);
 	}
 	lpfc_work_list_done(phba);
 }
@@ -689,7 +717,7 @@
 	lpfc_can_disctmo(vport);
 }
 
-static void
+void
 lpfc_linkdown_port(struct lpfc_vport *vport)
 {
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
@@ -716,6 +744,7 @@
 	if (phba->link_state == LPFC_LINK_DOWN)
 		return 0;
 	spin_lock_irq(&phba->hbalock);
+	phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_DISCOVERED);
 	if (phba->link_state > LPFC_LINK_DOWN) {
 		phba->link_state = LPFC_LINK_DOWN;
 		phba->pport->fc_flag &= ~FC_LBIT;
@@ -723,7 +752,7 @@
 	spin_unlock_irq(&phba->hbalock);
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			/* Issue a LINK DOWN event to all nodes */
 			lpfc_linkdown_port(vports[i]);
 		}
@@ -833,10 +862,11 @@
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
 			lpfc_linkup_port(vports[i]);
 	lpfc_destroy_vport_work_array(phba, vports);
-	if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
+	    (phba->sli_rev < LPFC_SLI_REV4))
 		lpfc_issue_clear_la(phba, phba->pport);
 
 	return 0;
@@ -854,7 +884,7 @@
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_sli   *psli = &phba->sli;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	uint32_t control;
 
 	/* Since we don't do discovery right now, turn these off here */
@@ -917,7 +947,7 @@
 {
 	struct lpfc_vport *vport = pmb->vport;
 
-	if (pmb->mb.mbxStatus)
+	if (pmb->u.mb.mbxStatus)
 		goto out;
 
 	mempool_free(pmb, phba->mbox_mem_pool);
@@ -945,7 +975,7 @@
 	lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
 			 "0306 CONFIG_LINK mbxStatus error x%x "
 			 "HBA state x%x\n",
-			 pmb->mb.mbxStatus, vport->port_state);
+			 pmb->u.mb.mbxStatus, vport->port_state);
 	mempool_free(pmb, phba->mbox_mem_pool);
 
 	lpfc_linkdown(phba);
@@ -959,9 +989,592 @@
 }
 
 static void
+lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_vport *vport = mboxq->vport;
+	unsigned long flags;
+
+	if (mboxq->u.mb.mbxStatus) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+			 "2017 REG_FCFI mbxStatus error x%x "
+			 "HBA state x%x\n",
+			 mboxq->u.mb.mbxStatus, vport->port_state);
+		mempool_free(mboxq, phba->mbox_mem_pool);
+		return;
+	}
+
+	/* Start FCoE discovery by sending a FLOGI. */
+	phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi, &mboxq->u.mqe.un.reg_fcfi);
+	/* Set the FCFI registered flag */
+	spin_lock_irqsave(&phba->hbalock, flags);
+	phba->fcf.fcf_flag |= FCF_REGISTERED;
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+	if (vport->port_state != LPFC_FLOGI) {
+		spin_lock_irqsave(&phba->hbalock, flags);
+		phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		lpfc_initial_flogi(vport);
+	}
+
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return;
+}
+
+/**
+ * lpfc_fab_name_match - Check if the fcf fabric name match.
+ * @fab_name: pointer to fabric name.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine compare the fcf record's fabric name with provided
+ * fabric name. If the fabric name are identical this function
+ * returns 1 else return 0.
+ **/
+static uint32_t
+lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record)
+{
+	if ((fab_name[0] ==
+		bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record)) &&
+	    (fab_name[1] ==
+		bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record)) &&
+	    (fab_name[2] ==
+		bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record)) &&
+	    (fab_name[3] ==
+		bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record)) &&
+	    (fab_name[4] ==
+		bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record)) &&
+	    (fab_name[5] ==
+		bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record)) &&
+	    (fab_name[6] ==
+		bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record)) &&
+	    (fab_name[7] ==
+		bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record)))
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * lpfc_mac_addr_match - Check if the fcf mac address match.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine compare the fcf record's mac address with HBA's
+ * FCF mac address. If the mac addresses are identical this function
+ * returns 1 else return 0.
+ **/
+static uint32_t
+lpfc_mac_addr_match(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
+{
+	if ((phba->fcf.mac_addr[0] ==
+		bf_get(lpfc_fcf_record_mac_0, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[1] ==
+		bf_get(lpfc_fcf_record_mac_1, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[2] ==
+		bf_get(lpfc_fcf_record_mac_2, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[3] ==
+		bf_get(lpfc_fcf_record_mac_3, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[4] ==
+		bf_get(lpfc_fcf_record_mac_4, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[5] ==
+		bf_get(lpfc_fcf_record_mac_5, new_fcf_record)))
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine copies the FCF information from the FCF
+ * record to lpfc_hba data structure.
+ **/
+static void
+lpfc_copy_fcf_record(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
+{
+	phba->fcf.fabric_name[0] =
+		bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record);
+	phba->fcf.fabric_name[1] =
+		bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record);
+	phba->fcf.fabric_name[2] =
+		bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record);
+	phba->fcf.fabric_name[3] =
+		bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record);
+	phba->fcf.fabric_name[4] =
+		bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record);
+	phba->fcf.fabric_name[5] =
+		bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record);
+	phba->fcf.fabric_name[6] =
+		bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record);
+	phba->fcf.fabric_name[7] =
+		bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record);
+	phba->fcf.mac_addr[0] =
+		bf_get(lpfc_fcf_record_mac_0, new_fcf_record);
+	phba->fcf.mac_addr[1] =
+		bf_get(lpfc_fcf_record_mac_1, new_fcf_record);
+	phba->fcf.mac_addr[2] =
+		bf_get(lpfc_fcf_record_mac_2, new_fcf_record);
+	phba->fcf.mac_addr[3] =
+		bf_get(lpfc_fcf_record_mac_3, new_fcf_record);
+	phba->fcf.mac_addr[4] =
+		bf_get(lpfc_fcf_record_mac_4, new_fcf_record);
+	phba->fcf.mac_addr[5] =
+		bf_get(lpfc_fcf_record_mac_5, new_fcf_record);
+	phba->fcf.fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
+	phba->fcf.priority = new_fcf_record->fip_priority;
+}
+
+/**
+ * lpfc_register_fcf - Register the FCF with hba.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine issues a register fcfi mailbox command to register
+ * the fcf with HBA.
+ **/
+static void
+lpfc_register_fcf(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *fcf_mbxq;
+	int rc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&phba->hbalock, flags);
+
+	/* If the FCF is not availabe do nothing. */
+	if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) {
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		return;
+	}
+
+	/* The FCF is already registered, start discovery */
+	if (phba->fcf.fcf_flag & FCF_REGISTERED) {
+		phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		if (phba->pport->port_state != LPFC_FLOGI)
+			lpfc_initial_flogi(phba->pport);
+		return;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+
+	fcf_mbxq = mempool_alloc(phba->mbox_mem_pool,
+		GFP_KERNEL);
+	if (!fcf_mbxq)
+		return;
+
+	lpfc_reg_fcfi(phba, fcf_mbxq);
+	fcf_mbxq->vport = phba->pport;
+	fcf_mbxq->mbox_cmpl = lpfc_mbx_cmpl_reg_fcfi;
+	rc = lpfc_sli_issue_mbox(phba, fcf_mbxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED)
+		mempool_free(fcf_mbxq, phba->mbox_mem_pool);
+
+	return;
+}
+
+/**
+ * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ * @boot_flag: Indicates if this record used by boot bios.
+ * @addr_mode: The address mode to be used by this FCF
+ *
+ * This routine compare the fcf record with connect list obtained from the
+ * config region to decide if this FCF can be used for SAN discovery. It returns
+ * 1 if this record can be used for SAN discovery else return zero. If this FCF
+ * record can be used for SAN discovery, the boot_flag will indicate if this FCF
+ * is used by boot bios and addr_mode will indicate the addressing mode to be
+ * used for this FCF when the function returns.
+ * If the FCF record need to be used with a particular vlan id, the vlan is
+ * set in the vlan_id on return of the function. If not VLAN tagging need to
+ * be used with the FCF vlan_id will be set to 0xFFFF;
+ **/
+static int
+lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
+			struct fcf_record *new_fcf_record,
+			uint32_t *boot_flag, uint32_t *addr_mode,
+			uint16_t *vlan_id)
+{
+	struct lpfc_fcf_conn_entry *conn_entry;
+
+	if (!phba->cfg_enable_fip) {
+		*boot_flag = 0;
+		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+				new_fcf_record);
+		if (phba->valid_vlan)
+			*vlan_id = phba->vlan_id;
+		else
+			*vlan_id = 0xFFFF;
+		return 1;
+	}
+
+	/*
+	 * If there are no FCF connection table entry, driver connect to all
+	 * FCFs.
+	 */
+	if (list_empty(&phba->fcf_conn_rec_list)) {
+		*boot_flag = 0;
+		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+			new_fcf_record);
+		*vlan_id = 0xFFFF;
+		return 1;
+	}
+
+	list_for_each_entry(conn_entry, &phba->fcf_conn_rec_list, list) {
+		if (!(conn_entry->conn_rec.flags & FCFCNCT_VALID))
+			continue;
+
+		if ((conn_entry->conn_rec.flags & FCFCNCT_FBNM_VALID) &&
+			!lpfc_fab_name_match(conn_entry->conn_rec.fabric_name,
+				new_fcf_record))
+			continue;
+
+		if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) {
+			/*
+			 * If the vlan bit map does not have the bit set for the
+			 * vlan id to be used, then it is not a match.
+			 */
+			if (!(new_fcf_record->vlan_bitmap
+				[conn_entry->conn_rec.vlan_tag / 8] &
+				(1 << (conn_entry->conn_rec.vlan_tag % 8))))
+				continue;
+		}
+
+		/*
+		 * Check if the connection record specifies a required
+		 * addressing mode.
+		 */
+		if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+			!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)) {
+
+			/*
+			 * If SPMA required but FCF not support this continue.
+			 */
+			if ((conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+				!(bf_get(lpfc_fcf_record_mac_addr_prov,
+					new_fcf_record) & LPFC_FCF_SPMA))
+				continue;
+
+			/*
+			 * If FPMA required but FCF not support this continue.
+			 */
+			if (!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+				!(bf_get(lpfc_fcf_record_mac_addr_prov,
+				new_fcf_record) & LPFC_FCF_FPMA))
+				continue;
+		}
+
+		/*
+		 * This fcf record matches filtering criteria.
+		 */
+		if (conn_entry->conn_rec.flags & FCFCNCT_BOOT)
+			*boot_flag = 1;
+		else
+			*boot_flag = 0;
+
+		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+				new_fcf_record);
+		/*
+		 * If the user specified a required address mode, assign that
+		 * address mode
+		 */
+		if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+			(!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)))
+			*addr_mode = (conn_entry->conn_rec.flags &
+				FCFCNCT_AM_SPMA) ?
+				LPFC_FCF_SPMA : LPFC_FCF_FPMA;
+		/*
+		 * If the user specified a prefered address mode, use the
+		 * addr mode only if FCF support the addr_mode.
+		 */
+		else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+			(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
+			(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+			(*addr_mode & LPFC_FCF_SPMA))
+				*addr_mode = LPFC_FCF_SPMA;
+		else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+			(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
+			!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+			(*addr_mode & LPFC_FCF_FPMA))
+				*addr_mode = LPFC_FCF_FPMA;
+		/*
+		 * If user did not specify any addressing mode, use FPMA if
+		 * possible else use SPMA.
+		 */
+		else if (*addr_mode & LPFC_FCF_FPMA)
+			*addr_mode = LPFC_FCF_FPMA;
+
+		if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID)
+			*vlan_id = conn_entry->conn_rec.vlan_tag;
+		else
+			*vlan_id = 0xFFFF;
+
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * lpfc_mbx_cmpl_read_fcf_record - Completion handler for read_fcf mbox.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox object.
+ *
+ * This function iterate through all the fcf records available in
+ * HBA and choose the optimal FCF record for discovery. After finding
+ * the FCF for discovery it register the FCF record and kick start
+ * discovery.
+ * If FCF_IN_USE flag is set in currently used FCF, the routine try to
+ * use a FCF record which match fabric name and mac address of the
+ * currently used FCF record.
+ * If the driver support only one FCF, it will try to use the FCF record
+ * used by BOOT_BIOS.
+ */
+void
+lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	void *virt_addr;
+	dma_addr_t phys_addr;
+	uint8_t *bytep;
+	struct lpfc_mbx_sge sge;
+	struct lpfc_mbx_read_fcf_tbl *read_fcf;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	struct fcf_record *new_fcf_record;
+	int rc;
+	uint32_t boot_flag, addr_mode;
+	uint32_t next_fcf_index;
+	unsigned long flags;
+	uint16_t vlan_id;
+
+	/* Get the first SGE entry from the non-embedded DMA memory. This
+	 * routine only uses a single SGE.
+	 */
+	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+	if (unlikely(!mboxq->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2524 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		goto out;
+	}
+	virt_addr = mboxq->sge_array->addr[0];
+
+	shdr = (union lpfc_sli4_cfg_shdr *)virt_addr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+				 &shdr->response);
+	/*
+	 * The FCF Record was read and there is no reason for the driver
+	 * to maintain the FCF record data or memory. Instead, just need
+	 * to book keeping the FCFIs can be used.
+	 */
+	if (shdr_status || shdr_add_status) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2521 READ_FCF_RECORD mailbox failed "
+				"with status x%x add_status x%x, mbx\n",
+				shdr_status, shdr_add_status);
+		goto out;
+	}
+	/* Interpreting the returned information of FCF records */
+	read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
+	lpfc_sli_pcimem_bcopy(read_fcf, read_fcf,
+			      sizeof(struct lpfc_mbx_read_fcf_tbl));
+	next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf);
+
+	new_fcf_record = (struct fcf_record *)(virt_addr +
+			  sizeof(struct lpfc_mbx_read_fcf_tbl));
+	lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record,
+			      sizeof(struct fcf_record));
+	bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+
+	rc = lpfc_match_fcf_conn_list(phba, new_fcf_record,
+				      &boot_flag, &addr_mode,
+					&vlan_id);
+	/*
+	 * If the fcf record does not match with connect list entries
+	 * read the next entry.
+	 */
+	if (!rc)
+		goto read_next_fcf;
+	/*
+	 * If this is not the first FCF discovery of the HBA, use last
+	 * FCF record for the discovery.
+	 */
+	spin_lock_irqsave(&phba->hbalock, flags);
+	if (phba->fcf.fcf_flag & FCF_IN_USE) {
+		if (lpfc_fab_name_match(phba->fcf.fabric_name,
+			new_fcf_record) &&
+		    lpfc_mac_addr_match(phba, new_fcf_record)) {
+			phba->fcf.fcf_flag |= FCF_AVAILABLE;
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			goto out;
+		}
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		goto read_next_fcf;
+	}
+	if (phba->fcf.fcf_flag & FCF_AVAILABLE) {
+		/*
+		 * If the current FCF record does not have boot flag
+		 * set and new fcf record has boot flag set, use the
+		 * new fcf record.
+		 */
+		if (boot_flag && !(phba->fcf.fcf_flag & FCF_BOOT_ENABLE)) {
+			/* Use this FCF record */
+			lpfc_copy_fcf_record(phba, new_fcf_record);
+			phba->fcf.addr_mode = addr_mode;
+			phba->fcf.fcf_flag |= FCF_BOOT_ENABLE;
+			if (vlan_id != 0xFFFF) {
+				phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+				phba->fcf.vlan_id = vlan_id;
+			}
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			goto read_next_fcf;
+		}
+		/*
+		 * If the current FCF record has boot flag set and the
+		 * new FCF record does not have boot flag, read the next
+		 * FCF record.
+		 */
+		if (!boot_flag && (phba->fcf.fcf_flag & FCF_BOOT_ENABLE)) {
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			goto read_next_fcf;
+		}
+		/*
+		 * If there is a record with lower priority value for
+		 * the current FCF, use that record.
+		 */
+		if (lpfc_fab_name_match(phba->fcf.fabric_name, new_fcf_record)
+			&& (new_fcf_record->fip_priority <
+				phba->fcf.priority)) {
+			/* Use this FCF record */
+			lpfc_copy_fcf_record(phba, new_fcf_record);
+			phba->fcf.addr_mode = addr_mode;
+			if (vlan_id != 0xFFFF) {
+				phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+				phba->fcf.vlan_id = vlan_id;
+			}
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			goto read_next_fcf;
+		}
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		goto read_next_fcf;
+	}
+	/*
+	 * This is the first available FCF record, use this
+	 * record.
+	 */
+	lpfc_copy_fcf_record(phba, new_fcf_record);
+	phba->fcf.addr_mode = addr_mode;
+	if (boot_flag)
+		phba->fcf.fcf_flag |= FCF_BOOT_ENABLE;
+	phba->fcf.fcf_flag |= FCF_AVAILABLE;
+	if (vlan_id != 0xFFFF) {
+		phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+		phba->fcf.vlan_id = vlan_id;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+	goto read_next_fcf;
+
+read_next_fcf:
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0)
+		lpfc_register_fcf(phba);
+	else
+		lpfc_sli4_read_fcf_record(phba, next_fcf_index);
+	return;
+
+out:
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	lpfc_register_fcf(phba);
+
+	return;
+}
+
+/**
+ * lpfc_start_fdiscs - send fdiscs for each vports on this port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function loops through the list of vports on the @phba and issues an
+ * FDISC if possible.
+ */
+void
+lpfc_start_fdiscs(struct lpfc_hba *phba)
+{
+	struct lpfc_vport **vports;
+	int i;
+
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+			if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
+				continue;
+			/* There are no vpi for this vport */
+			if (vports[i]->vpi > phba->max_vpi) {
+				lpfc_vport_set_state(vports[i],
+						     FC_VPORT_FAILED);
+				continue;
+			}
+			if (phba->fc_topology == TOPOLOGY_LOOP) {
+				lpfc_vport_set_state(vports[i],
+						     FC_VPORT_LINKDOWN);
+				continue;
+			}
+			if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
+				lpfc_initial_fdisc(vports[i]);
+			else {
+				lpfc_vport_set_state(vports[i],
+						     FC_VPORT_NO_FABRIC_SUPP);
+				lpfc_printf_vlog(vports[i], KERN_ERR,
+						 LOG_ELS,
+						 "0259 No NPIV "
+						 "Fabric support\n");
+			}
+		}
+	}
+	lpfc_destroy_vport_work_array(phba, vports);
+}
+
+void
+lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_dmabuf *dmabuf = mboxq->context1;
+	struct lpfc_vport *vport = mboxq->vport;
+
+	if (mboxq->u.mb.mbxStatus) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+			 "2018 REG_VFI mbxStatus error x%x "
+			 "HBA state x%x\n",
+			 mboxq->u.mb.mbxStatus, vport->port_state);
+		if (phba->fc_topology == TOPOLOGY_LOOP) {
+			/* FLOGI failed, use loop map to make discovery list */
+			lpfc_disc_list_loopmap(vport);
+			/* Start discovery */
+			lpfc_disc_start(vport);
+			goto fail_free_mem;
+		}
+		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+		goto fail_free_mem;
+	}
+	/* Mark the vport has registered with its VFI */
+	vport->vfi_state |= LPFC_VFI_REGISTERED;
+
+	if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
+		lpfc_start_fdiscs(phba);
+		lpfc_do_scr_ns_plogi(phba, vport);
+	}
+
+fail_free_mem:
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+	kfree(dmabuf);
+	return;
+}
+
+static void
 lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) pmb->context1;
 	struct lpfc_vport  *vport = pmb->vport;
 
@@ -1012,13 +1625,13 @@
 lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 {
 	struct lpfc_vport *vport = phba->pport;
-	LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox;
+	LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
 	int i;
 	struct lpfc_dmabuf *mp;
 	int rc;
+	struct fcf_record *fcf_record;
 
 	sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-	cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 
 	spin_lock_irq(&phba->hbalock);
 	switch (la->UlnkSpeed) {
@@ -1034,6 +1647,9 @@
 	case LA_8GHZ_LINK:
 		phba->fc_linkspeed = LA_8GHZ_LINK;
 		break;
+	case LA_10GHZ_LINK:
+		phba->fc_linkspeed = LA_10GHZ_LINK;
+		break;
 	default:
 		phba->fc_linkspeed = LA_UNKNW_LINK;
 		break;
@@ -1115,22 +1731,66 @@
 			lpfc_mbuf_free(phba, mp->virt, mp->phys);
 			kfree(mp);
 			mempool_free(sparam_mbox, phba->mbox_mem_pool);
-			if (cfglink_mbox)
-				mempool_free(cfglink_mbox, phba->mbox_mem_pool);
 			goto out;
 		}
 	}
 
-	if (cfglink_mbox) {
+	if (!(phba->hba_flag & HBA_FCOE_SUPPORT)) {
+		cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+		if (!cfglink_mbox)
+			goto out;
 		vport->port_state = LPFC_LOCAL_CFG_LINK;
 		lpfc_config_link(phba, cfglink_mbox);
 		cfglink_mbox->vport = vport;
 		cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link;
 		rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT);
-		if (rc != MBX_NOT_FINISHED)
-			return;
-		mempool_free(cfglink_mbox, phba->mbox_mem_pool);
+		if (rc == MBX_NOT_FINISHED) {
+			mempool_free(cfglink_mbox, phba->mbox_mem_pool);
+			goto out;
+		}
+	} else {
+		/*
+		 * Add the driver's default FCF record at FCF index 0 now. This
+		 * is phase 1 implementation that support FCF index 0 and driver
+		 * defaults.
+		 */
+		if (phba->cfg_enable_fip == 0) {
+			fcf_record = kzalloc(sizeof(struct fcf_record),
+					GFP_KERNEL);
+			if (unlikely(!fcf_record)) {
+				lpfc_printf_log(phba, KERN_ERR,
+					LOG_MBOX | LOG_SLI,
+					"2554 Could not allocate memmory for "
+					"fcf record\n");
+				rc = -ENODEV;
+				goto out;
+			}
+
+			lpfc_sli4_build_dflt_fcf_record(phba, fcf_record,
+						LPFC_FCOE_FCF_DEF_INDEX);
+			rc = lpfc_sli4_add_fcf_record(phba, fcf_record);
+			if (unlikely(rc)) {
+				lpfc_printf_log(phba, KERN_ERR,
+					LOG_MBOX | LOG_SLI,
+					"2013 Could not manually add FCF "
+					"record 0, status %d\n", rc);
+				rc = -ENODEV;
+				kfree(fcf_record);
+				goto out;
+			}
+			kfree(fcf_record);
+		}
+		/*
+		 * The driver is expected to do FIP/FCF. Call the port
+		 * and get the FCF Table.
+		 */
+		rc = lpfc_sli4_read_fcf_record(phba,
+					LPFC_FCOE_FCF_GET_FIRST);
+		if (rc)
+			goto out;
 	}
+
+	return;
 out:
 	lpfc_vport_set_state(vport, FC_VPORT_FAILED);
 	lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
@@ -1147,10 +1807,12 @@
 	struct lpfc_sli *psli = &phba->sli;
 	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag |= LPFC_PROCESS_LA;
-	control = readl(phba->HCregaddr);
-	control |= HC_LAINT_ENA;
-	writel(control, phba->HCregaddr);
-	readl(phba->HCregaddr); /* flush */
+	if (phba->sli_rev <= LPFC_SLI_REV3) {
+		control = readl(phba->HCregaddr);
+		control |= HC_LAINT_ENA;
+		writel(control, phba->HCregaddr);
+		readl(phba->HCregaddr); /* flush */
+	}
 	spin_unlock_irq(&phba->hbalock);
 }
 
@@ -1159,6 +1821,7 @@
 {
 	lpfc_linkdown(phba);
 	lpfc_enable_la(phba);
+	lpfc_unregister_unused_fcf(phba);
 	/* turn on Link Attention interrupts - no CLEAR_LA needed */
 }
 
@@ -1175,7 +1838,7 @@
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	READ_LA_VAR *la;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 
 	/* Unblock ELS traffic */
@@ -1190,7 +1853,7 @@
 		goto lpfc_mbx_cmpl_read_la_free_mbuf;
 	}
 
-	la = (READ_LA_VAR *) & pmb->mb.un.varReadLA;
+	la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
 
 	memcpy(&phba->alpa_map[0], mp->virt, 128);
 
@@ -1328,7 +1991,7 @@
 static void
 lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 
@@ -1381,7 +2044,7 @@
 {
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 
 	switch (mb->mbxStatus) {
 	case 0x0011:
@@ -1416,6 +2079,128 @@
 	return;
 }
 
+/**
+ * lpfc_create_static_vport - Read HBA config region to create static vports.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine issue a DUMP mailbox command for config region 22 to get
+ * the list of static vports to be created. The function create vports
+ * based on the information returned from the HBA.
+ **/
+void
+lpfc_create_static_vport(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *pmb = NULL;
+	MAILBOX_t *mb;
+	struct static_vport_info *vport_info;
+	int rc, i;
+	struct fc_vport_identifiers vport_id;
+	struct fc_vport *new_fc_vport;
+	struct Scsi_Host *shost;
+	struct lpfc_vport *vport;
+	uint16_t offset = 0;
+	uint8_t *vport_buff;
+
+	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0542 lpfc_create_static_vport failed to"
+				" allocate mailbox memory\n");
+		return;
+	}
+
+	mb = &pmb->u.mb;
+
+	vport_info = kzalloc(sizeof(struct static_vport_info), GFP_KERNEL);
+	if (!vport_info) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0543 lpfc_create_static_vport failed to"
+				" allocate vport_info\n");
+		mempool_free(pmb, phba->mbox_mem_pool);
+		return;
+	}
+
+	vport_buff = (uint8_t *) vport_info;
+	do {
+		lpfc_dump_static_vport(phba, pmb, offset);
+		pmb->vport = phba->pport;
+		rc = lpfc_sli_issue_mbox_wait(phba, pmb, LPFC_MBOX_TMO);
+
+		if ((rc != MBX_SUCCESS) || mb->mbxStatus) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0544 lpfc_create_static_vport failed to"
+				" issue dump mailbox command ret 0x%x "
+				"status 0x%x\n",
+				rc, mb->mbxStatus);
+			goto out;
+		}
+
+		if (mb->un.varDmp.word_cnt >
+			sizeof(struct static_vport_info) - offset)
+			mb->un.varDmp.word_cnt =
+			sizeof(struct static_vport_info) - offset;
+
+		lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
+			vport_buff + offset,
+			mb->un.varDmp.word_cnt);
+		offset += mb->un.varDmp.word_cnt;
+
+	} while (mb->un.varDmp.word_cnt &&
+		offset < sizeof(struct static_vport_info));
+
+
+	if ((le32_to_cpu(vport_info->signature) != VPORT_INFO_SIG) ||
+		((le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK)
+			!= VPORT_INFO_REV)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"0545 lpfc_create_static_vport bad"
+			" information header 0x%x 0x%x\n",
+			le32_to_cpu(vport_info->signature),
+			le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK);
+
+		goto out;
+	}
+
+	shost = lpfc_shost_from_vport(phba->pport);
+
+	for (i = 0; i < MAX_STATIC_VPORT_COUNT; i++) {
+		memset(&vport_id, 0, sizeof(vport_id));
+		vport_id.port_name = wwn_to_u64(vport_info->vport_list[i].wwpn);
+		vport_id.node_name = wwn_to_u64(vport_info->vport_list[i].wwnn);
+		if (!vport_id.port_name || !vport_id.node_name)
+			continue;
+
+		vport_id.roles = FC_PORT_ROLE_FCP_INITIATOR;
+		vport_id.vport_type = FC_PORTTYPE_NPIV;
+		vport_id.disable = false;
+		new_fc_vport = fc_vport_create(shost, 0, &vport_id);
+
+		if (!new_fc_vport) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0546 lpfc_create_static_vport failed to"
+				" create vport \n");
+			continue;
+		}
+
+		vport = *(struct lpfc_vport **)new_fc_vport->dd_data;
+		vport->vport_flag |= STATIC_VPORT;
+	}
+
+out:
+	/*
+	 * If this is timed out command, setting NULL to context2 tell SLI
+	 * layer not to use this buffer.
+	 */
+	spin_lock_irq(&phba->hbalock);
+	pmb->context2 = NULL;
+	spin_unlock_irq(&phba->hbalock);
+	kfree(vport_info);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(pmb, phba->mbox_mem_pool);
+
+	return;
+}
+
 /*
  * This routine handles processing a Fabric REG_LOGIN mailbox
  * command upon completion. It is setup in the LPFC_MBOXQ
@@ -1426,16 +2211,17 @@
 lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	struct lpfc_vport *vport = pmb->vport;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp;
-	struct lpfc_vport **vports;
-	int i;
 
 	ndlp = (struct lpfc_nodelist *) pmb->context2;
 	pmb->context1 = NULL;
 	pmb->context2 = NULL;
 	if (mb->mbxStatus) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+				 "0258 Register Fabric login error: 0x%x\n",
+				 mb->mbxStatus);
 		lpfc_mbuf_free(phba, mp->virt, mp->phys);
 		kfree(mp);
 		mempool_free(pmb, phba->mbox_mem_pool);
@@ -1454,9 +2240,6 @@
 		}
 
 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
-		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
-				 "0258 Register Fabric login error: 0x%x\n",
-				 mb->mbxStatus);
 		/* Decrement the reference count to ndlp after the reference
 		 * to the ndlp are done.
 		 */
@@ -1465,34 +2248,12 @@
 	}
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
+	ndlp->nlp_flag |= NLP_RPI_VALID;
 	ndlp->nlp_type |= NLP_FABRIC;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 
 	if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
-		vports = lpfc_create_vport_work_array(phba);
-		if (vports != NULL)
-			for(i = 0;
-			    i <= phba->max_vpi && vports[i] != NULL;
-			    i++) {
-				if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
-					continue;
-				if (phba->fc_topology == TOPOLOGY_LOOP) {
-					lpfc_vport_set_state(vports[i],
-							FC_VPORT_LINKDOWN);
-					continue;
-				}
-				if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
-					lpfc_initial_fdisc(vports[i]);
-				else {
-					lpfc_vport_set_state(vports[i],
-						FC_VPORT_NO_FABRIC_SUPP);
-					lpfc_printf_vlog(vport, KERN_ERR,
-							 LOG_ELS,
-							"0259 No NPIV "
-							"Fabric support\n");
-				}
-			}
-		lpfc_destroy_vport_work_array(phba, vports);
+		lpfc_start_fdiscs(phba);
 		lpfc_do_scr_ns_plogi(phba, vport);
 	}
 
@@ -1516,13 +2277,16 @@
 void
 lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
 	struct lpfc_vport *vport = pmb->vport;
 
 	if (mb->mbxStatus) {
 out:
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				 "0260 Register NameServer error: 0x%x\n",
+				 mb->mbxStatus);
 		/* decrement the node reference count held for this
 		 * callback function.
 		 */
@@ -1546,15 +2310,13 @@
 			return;
 		}
 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
-		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
-				 "0260 Register NameServer error: 0x%x\n",
-				 mb->mbxStatus);
 		return;
 	}
 
 	pmb->context1 = NULL;
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
+	ndlp->nlp_flag |= NLP_RPI_VALID;
 	ndlp->nlp_type |= NLP_FABRIC;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 
@@ -2055,7 +2817,7 @@
 	if (pring->ringno == LPFC_ELS_RING) {
 		switch (icmd->ulpCommand) {
 		case CMD_GEN_REQUEST64_CR:
-			if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi)
+			if (iocb->context_un.ndlp == ndlp)
 				return 1;
 		case CMD_ELS_REQUEST64_CR:
 			if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID)
@@ -2102,7 +2864,7 @@
 	 */
 	psli = &phba->sli;
 	rpi = ndlp->nlp_rpi;
-	if (rpi) {
+	if (ndlp->nlp_flag & NLP_RPI_VALID) {
 		/* Now process each ring */
 		for (i = 0; i < psli->num_rings; i++) {
 			pring = &psli->ring[i];
@@ -2150,7 +2912,7 @@
 	LPFC_MBOXQ_t    *mbox;
 	int rc;
 
-	if (ndlp->nlp_rpi) {
+	if (ndlp->nlp_flag & NLP_RPI_VALID) {
 		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 		if (mbox) {
 			lpfc_unreg_login(phba, vport->vpi, ndlp->nlp_rpi, mbox);
@@ -2162,6 +2924,7 @@
 		}
 		lpfc_no_rpi(phba, ndlp);
 		ndlp->nlp_rpi = 0;
+		ndlp->nlp_flag &= ~NLP_RPI_VALID;
 		return 1;
 	}
 	return 0;
@@ -2252,7 +3015,7 @@
 
 	/* cleanup any ndlp on mbox q waiting for reglogin cmpl */
 	if ((mb = phba->sli.mbox_active)) {
-		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		   (ndlp == (struct lpfc_nodelist *) mb->context2)) {
 			mb->context2 = NULL;
 			mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
@@ -2261,7 +3024,7 @@
 
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
-		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		    (ndlp == (struct lpfc_nodelist *) mb->context2)) {
 			mp = (struct lpfc_dmabuf *) (mb->context1);
 			if (mp) {
@@ -2309,13 +3072,14 @@
 	int rc;
 
 	lpfc_cancel_retry_delay_tmo(vport, ndlp);
-	if (ndlp->nlp_flag & NLP_DEFER_RM && !ndlp->nlp_rpi) {
+	if ((ndlp->nlp_flag & NLP_DEFER_RM) &&
+	    !(ndlp->nlp_flag & NLP_RPI_VALID)) {
 		/* For this case we need to cleanup the default rpi
 		 * allocated by the firmware.
 		 */
 		if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL))
 			!= NULL) {
-			rc = lpfc_reg_login(phba, vport->vpi, ndlp->nlp_DID,
+			rc = lpfc_reg_rpi(phba, vport->vpi, ndlp->nlp_DID,
 			    (uint8_t *) &vport->fc_sparam, mbox, 0);
 			if (rc) {
 				mempool_free(mbox, phba->mbox_mem_pool);
@@ -2553,7 +3317,8 @@
 	 * clear_la then don't send it.
 	 */
 	if ((phba->link_state >= LPFC_CLEAR_LA) ||
-	    (vport->port_type != LPFC_PHYSICAL_PORT))
+	    (vport->port_type != LPFC_PHYSICAL_PORT) ||
+		(phba->sli_rev == LPFC_SLI_REV4))
 		return;
 
 			/* Link up discovery */
@@ -2582,7 +3347,7 @@
 
 	regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (regvpimbox) {
-		lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, regvpimbox);
+		lpfc_reg_vpi(vport, regvpimbox);
 		regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi;
 		regvpimbox->vport = vport;
 		if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT)
@@ -2642,7 +3407,8 @@
 	 */
 	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
 	    !(vport->fc_flag & FC_PT2PT) &&
-	    !(vport->fc_flag & FC_RSCN_MODE)) {
+	    !(vport->fc_flag & FC_RSCN_MODE) &&
+	    (phba->sli_rev < LPFC_SLI_REV4)) {
 		lpfc_issue_reg_vpi(phba, vport);
 		return;
 	}
@@ -2919,11 +3685,13 @@
 		 * set port_state to PORT_READY if SLI2.
 		 * cmpl_reg_vpi will set port_state to READY for SLI3.
 		 */
-		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
-			lpfc_issue_reg_vpi(phba, vport);
-		else  {	/* NPIV Not enabled */
-			lpfc_issue_clear_la(phba, vport);
-			vport->port_state = LPFC_VPORT_READY;
+		if (phba->sli_rev < LPFC_SLI_REV4) {
+			if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+				lpfc_issue_reg_vpi(phba, vport);
+			else  {	/* NPIV Not enabled */
+				lpfc_issue_clear_la(phba, vport);
+				vport->port_state = LPFC_VPORT_READY;
+			}
 		}
 
 		/* Setup and issue mailbox INITIALIZE LINK command */
@@ -2939,7 +3707,7 @@
 		lpfc_linkdown(phba);
 		lpfc_init_link(phba, initlinkmbox, phba->cfg_topology,
 			       phba->cfg_link_speed);
-		initlinkmbox->mb.un.varInitLnk.lipsr_AL_PA = 0;
+		initlinkmbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
 		initlinkmbox->vport = vport;
 		initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT);
@@ -2959,11 +3727,13 @@
 		 * set port_state to PORT_READY if SLI2.
 		 * cmpl_reg_vpi will set port_state to READY for SLI3.
 		 */
-		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
-			lpfc_issue_reg_vpi(phba, vport);
-		else {	/* NPIV Not enabled */
-			lpfc_issue_clear_la(phba, vport);
-			vport->port_state = LPFC_VPORT_READY;
+		if (phba->sli_rev < LPFC_SLI_REV4) {
+			if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+				lpfc_issue_reg_vpi(phba, vport);
+			else  {	/* NPIV Not enabled */
+				lpfc_issue_clear_la(phba, vport);
+				vport->port_state = LPFC_VPORT_READY;
+			}
 		}
 		break;
 
@@ -3036,7 +3806,7 @@
 void
 lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf   *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
 	struct lpfc_vport    *vport = pmb->vport;
@@ -3044,6 +3814,7 @@
 	pmb->context1 = NULL;
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
+	ndlp->nlp_flag |= NLP_RPI_VALID;
 	ndlp->nlp_type |= NLP_FABRIC;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 
@@ -3297,3 +4068,395 @@
 			return 1;
 	return 0;
 }
+
+/**
+ * lpfc_fcf_inuse - Check if FCF can be unregistered.
+ * @phba: Pointer to hba context object.
+ *
+ * This function iterate through all FC nodes associated
+ * will all vports to check if there is any node with
+ * fc_rports associated with it. If there is an fc_rport
+ * associated with the node, then the node is either in
+ * discovered state or its devloss_timer is pending.
+ */
+static int
+lpfc_fcf_inuse(struct lpfc_hba *phba)
+{
+	struct lpfc_vport **vports;
+	int i, ret = 0;
+	struct lpfc_nodelist *ndlp;
+	struct Scsi_Host  *shost;
+
+	vports = lpfc_create_vport_work_array(phba);
+
+	for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+		shost = lpfc_shost_from_vport(vports[i]);
+		spin_lock_irq(shost->host_lock);
+		list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) {
+			if (NLP_CHK_NODE_ACT(ndlp) && ndlp->rport &&
+			  (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) {
+				ret = 1;
+				spin_unlock_irq(shost->host_lock);
+				goto out;
+			}
+		}
+		spin_unlock_irq(shost->host_lock);
+	}
+out:
+	lpfc_destroy_vport_work_array(phba, vports);
+	return ret;
+}
+
+/**
+ * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi.
+ * @phba: Pointer to hba context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This function frees memory associated with the mailbox command.
+ */
+static void
+lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_vport *vport = mboxq->vport;
+
+	if (mboxq->u.mb.mbxStatus) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2555 UNREG_VFI mbxStatus error x%x "
+			"HBA state x%x\n",
+			mboxq->u.mb.mbxStatus, vport->port_state);
+	}
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return;
+}
+
+/**
+ * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi.
+ * @phba: Pointer to hba context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This function frees memory associated with the mailbox command.
+ */
+static void
+lpfc_unregister_fcfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_vport *vport = mboxq->vport;
+
+	if (mboxq->u.mb.mbxStatus) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2550 UNREG_FCFI mbxStatus error x%x "
+			"HBA state x%x\n",
+			mboxq->u.mb.mbxStatus, vport->port_state);
+	}
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return;
+}
+
+/**
+ * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected.
+ * @phba: Pointer to hba context object.
+ *
+ * This function check if there are any connected remote port for the FCF and
+ * if all the devices are disconnected, this function unregister FCFI.
+ * This function also tries to use another FCF for discovery.
+ */
+void
+lpfc_unregister_unused_fcf(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc;
+	struct lpfc_vport **vports;
+	int i;
+
+	spin_lock_irq(&phba->hbalock);
+	/*
+	 * If HBA is not running in FIP mode or
+	 * If HBA does not support FCoE or
+	 * If FCF is not registered.
+	 * do nothing.
+	 */
+	if (!(phba->hba_flag & HBA_FCOE_SUPPORT) ||
+		!(phba->fcf.fcf_flag & FCF_REGISTERED) ||
+		(phba->cfg_enable_fip == 0)) {
+		spin_unlock_irq(&phba->hbalock);
+		return;
+	}
+	spin_unlock_irq(&phba->hbalock);
+
+	if (lpfc_fcf_inuse(phba))
+		return;
+
+
+	/* Unregister VPIs */
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports &&
+		(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+			lpfc_mbx_unreg_vpi(vports[i]);
+			vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+			vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
+		}
+	lpfc_destroy_vport_work_array(phba, vports);
+
+	/* Unregister VFI */
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2556 UNREG_VFI mbox allocation failed"
+			"HBA state x%x\n",
+			phba->pport->port_state);
+		return;
+	}
+
+	lpfc_unreg_vfi(mbox, phba->pport->vfi);
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_unregister_vfi_cmpl;
+
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2557 UNREG_VFI issue mbox failed rc x%x "
+			"HBA state x%x\n",
+			rc, phba->pport->port_state);
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return;
+	}
+
+	/* Unregister FCF */
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2551 UNREG_FCFI mbox allocation failed"
+			"HBA state x%x\n",
+			phba->pport->port_state);
+		return;
+	}
+
+	lpfc_unreg_fcfi(mbox, phba->fcf.fcfi);
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl;
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2552 UNREG_FCFI issue mbox failed rc x%x "
+			"HBA state x%x\n",
+			rc, phba->pport->port_state);
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return;
+	}
+
+	spin_lock_irq(&phba->hbalock);
+	phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_REGISTERED |
+		FCF_DISCOVERED | FCF_BOOT_ENABLE | FCF_IN_USE |
+		FCF_VALID_VLAN);
+	spin_unlock_irq(&phba->hbalock);
+
+	/*
+	 * If driver is not unloading, check if there is any other
+	 * FCF record that can be used for discovery.
+	 */
+	if ((phba->pport->load_flag & FC_UNLOADING) ||
+		(phba->link_state < LPFC_LINK_UP))
+		return;
+
+	rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
+
+	if (rc)
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2553 lpfc_unregister_unused_fcf failed to read FCF"
+			" record HBA state x%x\n",
+			phba->pport->port_state);
+}
+
+/**
+ * lpfc_read_fcf_conn_tbl - Create driver FCF connection table.
+ * @phba: Pointer to hba context object.
+ * @buff: Buffer containing the FCF connection table as in the config
+ *         region.
+ * This function create driver data structure for the FCF connection
+ * record table read from config region 23.
+ */
+static void
+lpfc_read_fcf_conn_tbl(struct lpfc_hba *phba,
+	uint8_t *buff)
+{
+	struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
+	struct lpfc_fcf_conn_hdr *conn_hdr;
+	struct lpfc_fcf_conn_rec *conn_rec;
+	uint32_t record_count;
+	int i;
+
+	/* Free the current connect table */
+	list_for_each_entry_safe(conn_entry, next_conn_entry,
+		&phba->fcf_conn_rec_list, list)
+		kfree(conn_entry);
+
+	conn_hdr = (struct lpfc_fcf_conn_hdr *) buff;
+	record_count = conn_hdr->length * sizeof(uint32_t)/
+		sizeof(struct lpfc_fcf_conn_rec);
+
+	conn_rec = (struct lpfc_fcf_conn_rec *)
+		(buff + sizeof(struct lpfc_fcf_conn_hdr));
+
+	for (i = 0; i < record_count; i++) {
+		if (!(conn_rec[i].flags & FCFCNCT_VALID))
+			continue;
+		conn_entry = kzalloc(sizeof(struct lpfc_fcf_conn_entry),
+			GFP_KERNEL);
+		if (!conn_entry) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2566 Failed to allocate connection"
+				" table entry\n");
+			return;
+		}
+
+		memcpy(&conn_entry->conn_rec, &conn_rec[i],
+			sizeof(struct lpfc_fcf_conn_rec));
+		conn_entry->conn_rec.vlan_tag =
+			le16_to_cpu(conn_entry->conn_rec.vlan_tag) & 0xFFF;
+		conn_entry->conn_rec.flags =
+			le16_to_cpu(conn_entry->conn_rec.flags);
+		list_add_tail(&conn_entry->list,
+			&phba->fcf_conn_rec_list);
+	}
+}
+
+/**
+ * lpfc_read_fcoe_param - Read FCoe parameters from conf region..
+ * @phba: Pointer to hba context object.
+ * @buff: Buffer containing the FCoE parameter data structure.
+ *
+ *  This function update driver data structure with config
+ *  parameters read from config region 23.
+ */
+static void
+lpfc_read_fcoe_param(struct lpfc_hba *phba,
+			uint8_t *buff)
+{
+	struct lpfc_fip_param_hdr *fcoe_param_hdr;
+	struct lpfc_fcoe_params *fcoe_param;
+
+	fcoe_param_hdr = (struct lpfc_fip_param_hdr *)
+		buff;
+	fcoe_param = (struct lpfc_fcoe_params *)
+		buff + sizeof(struct lpfc_fip_param_hdr);
+
+	if ((fcoe_param_hdr->parm_version != FIPP_VERSION) ||
+		(fcoe_param_hdr->length != FCOE_PARAM_LENGTH))
+		return;
+
+	if (bf_get(lpfc_fip_param_hdr_fipp_mode, fcoe_param_hdr) ==
+			FIPP_MODE_ON)
+		phba->cfg_enable_fip = 1;
+
+	if (bf_get(lpfc_fip_param_hdr_fipp_mode, fcoe_param_hdr) ==
+		FIPP_MODE_OFF)
+		phba->cfg_enable_fip = 0;
+
+	if (fcoe_param_hdr->parm_flags & FIPP_VLAN_VALID) {
+		phba->valid_vlan = 1;
+		phba->vlan_id = le16_to_cpu(fcoe_param->vlan_tag) &
+			0xFFF;
+	}
+
+	phba->fc_map[0] = fcoe_param->fc_map[0];
+	phba->fc_map[1] = fcoe_param->fc_map[1];
+	phba->fc_map[2] = fcoe_param->fc_map[2];
+	return;
+}
+
+/**
+ * lpfc_get_rec_conf23 - Get a record type in config region data.
+ * @buff: Buffer containing config region 23 data.
+ * @size: Size of the data buffer.
+ * @rec_type: Record type to be searched.
+ *
+ * This function searches config region data to find the begining
+ * of the record specified by record_type. If record found, this
+ * function return pointer to the record else return NULL.
+ */
+static uint8_t *
+lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type)
+{
+	uint32_t offset = 0, rec_length;
+
+	if ((buff[0] == LPFC_REGION23_LAST_REC) ||
+		(size < sizeof(uint32_t)))
+		return NULL;
+
+	rec_length = buff[offset + 1];
+
+	/*
+	 * One TLV record has one word header and number of data words
+	 * specified in the rec_length field of the record header.
+	 */
+	while ((offset + rec_length * sizeof(uint32_t) + sizeof(uint32_t))
+		<= size) {
+		if (buff[offset] == rec_type)
+			return &buff[offset];
+
+		if (buff[offset] == LPFC_REGION23_LAST_REC)
+			return NULL;
+
+		offset += rec_length * sizeof(uint32_t) + sizeof(uint32_t);
+		rec_length = buff[offset + 1];
+	}
+	return NULL;
+}
+
+/**
+ * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23.
+ * @phba: Pointer to lpfc_hba data structure.
+ * @buff: Buffer containing config region 23 data.
+ * @size: Size of the data buffer.
+ *
+ * This fuction parse the FCoE config parameters in config region 23 and
+ * populate driver data structure with the parameters.
+ */
+void
+lpfc_parse_fcoe_conf(struct lpfc_hba *phba,
+		uint8_t *buff,
+		uint32_t size)
+{
+	uint32_t offset = 0, rec_length;
+	uint8_t *rec_ptr;
+
+	/*
+	 * If data size is less than 2 words signature and version cannot be
+	 * verified.
+	 */
+	if (size < 2*sizeof(uint32_t))
+		return;
+
+	/* Check the region signature first */
+	if (memcmp(buff, LPFC_REGION23_SIGNATURE, 4)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2567 Config region 23 has bad signature\n");
+		return;
+	}
+
+	offset += 4;
+
+	/* Check the data structure version */
+	if (buff[offset] != LPFC_REGION23_VERSION) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2568 Config region 23 has bad version\n");
+		return;
+	}
+	offset += 4;
+
+	rec_length = buff[offset + 1];
+
+	/* Read FCoE param record */
+	rec_ptr = lpfc_get_rec_conf23(&buff[offset],
+			size - offset, FCOE_PARAM_TYPE);
+	if (rec_ptr)
+		lpfc_read_fcoe_param(phba, rec_ptr);
+
+	/* Read FCF connection table */
+	rec_ptr = lpfc_get_rec_conf23(&buff[offset],
+		size - offset, FCOE_CONN_TBL_TYPE);
+	if (rec_ptr)
+		lpfc_read_fcf_conn_tbl(phba, rec_ptr);
+
+}
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 4168c7b..02aa016 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -471,6 +471,35 @@
 };
 
 /*
+ * Virtual Fabric Tagging Header
+ */
+struct fc_vft_header {
+	 uint32_t word0;
+#define fc_vft_hdr_r_ctl_SHIFT		24
+#define fc_vft_hdr_r_ctl_MASK		0xFF
+#define fc_vft_hdr_r_ctl_WORD		word0
+#define fc_vft_hdr_ver_SHIFT		22
+#define fc_vft_hdr_ver_MASK		0x3
+#define fc_vft_hdr_ver_WORD		word0
+#define fc_vft_hdr_type_SHIFT		18
+#define fc_vft_hdr_type_MASK		0xF
+#define fc_vft_hdr_type_WORD		word0
+#define fc_vft_hdr_e_SHIFT		16
+#define fc_vft_hdr_e_MASK		0x1
+#define fc_vft_hdr_e_WORD		word0
+#define fc_vft_hdr_priority_SHIFT	13
+#define fc_vft_hdr_priority_MASK	0x7
+#define fc_vft_hdr_priority_WORD	word0
+#define fc_vft_hdr_vf_id_SHIFT		1
+#define fc_vft_hdr_vf_id_MASK		0xFFF
+#define fc_vft_hdr_vf_id_WORD		word0
+	uint32_t word1;
+#define fc_vft_hdr_hopct_SHIFT		24
+#define fc_vft_hdr_hopct_MASK		0xFF
+#define fc_vft_hdr_hopct_WORD		word1
+};
+
+/*
  *  Extended Link Service LS_COMMAND codes (Payload Word 0)
  */
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -1152,6 +1181,9 @@
 #define PCI_DEVICE_ID_HORNET        0xfe05
 #define PCI_DEVICE_ID_ZEPHYR_SCSP   0xfe11
 #define PCI_DEVICE_ID_ZEPHYR_DCSP   0xfe12
+#define PCI_VENDOR_ID_SERVERENGINE  0x19a2
+#define PCI_DEVICE_ID_TIGERSHARK    0x0704
+#define PCI_DEVICE_ID_TIGERSHARK_S  0x0705
 
 #define JEDEC_ID_ADDRESS            0x0080001c
 #define FIREFLY_JEDEC_ID            0x1ACC
@@ -1342,15 +1374,21 @@
 #define MBX_READ_LA64       0x95
 #define MBX_REG_VPI	    0x96
 #define MBX_UNREG_VPI	    0x97
-#define MBX_REG_VNPID	    0x96
-#define MBX_UNREG_VNPID	    0x97
 
 #define MBX_WRITE_WWN       0x98
 #define MBX_SET_DEBUG       0x99
 #define MBX_LOAD_EXP_ROM    0x9C
-
-#define MBX_MAX_CMDS        0x9D
+#define MBX_SLI4_CONFIG	    0x9B
+#define MBX_SLI4_REQ_FTRS   0x9D
+#define MBX_MAX_CMDS        0x9E
+#define MBX_RESUME_RPI      0x9E
 #define MBX_SLI2_CMD_MASK   0x80
+#define MBX_REG_VFI         0x9F
+#define MBX_REG_FCFI        0xA0
+#define MBX_UNREG_VFI       0xA1
+#define MBX_UNREG_FCFI	    0xA2
+#define MBX_INIT_VFI        0xA3
+#define MBX_INIT_VPI        0xA4
 
 /* IOCB Commands */
 
@@ -1440,6 +1478,16 @@
 #define CMD_IOCB_LOGENTRY_CN		0x94
 #define CMD_IOCB_LOGENTRY_ASYNC_CN	0x96
 
+/* Unhandled Data Security SLI Commands */
+#define DSSCMD_IWRITE64_CR 		0xD8
+#define DSSCMD_IWRITE64_CX		0xD9
+#define DSSCMD_IREAD64_CR		0xDA
+#define DSSCMD_IREAD64_CX		0xDB
+#define DSSCMD_INVALIDATE_DEK		0xDC
+#define DSSCMD_SET_KEK			0xDD
+#define DSSCMD_GET_KEK_ID		0xDE
+#define DSSCMD_GEN_XFER			0xDF
+
 #define CMD_MAX_IOCB_CMD        0xE6
 #define CMD_IOCB_MASK           0xff
 
@@ -1466,6 +1514,7 @@
 #define MBXERR_BAD_RCV_LENGTH       14
 #define MBXERR_DMA_ERROR            15
 #define MBXERR_ERROR                16
+#define MBXERR_LINK_DOWN            0x33
 #define MBX_NOT_FINISHED           255
 
 #define MBX_BUSY                   0xffffff /* Attempted cmd to busy Mailbox */
@@ -1504,32 +1553,6 @@
 #endif
 };
 
-struct ulp_bde64 {	/* SLI-2 */
-	union ULP_BDE_TUS {
-		uint32_t w;
-		struct {
-#ifdef __BIG_ENDIAN_BITFIELD
-			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
-						   VALUE !! */
-			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
-#else	/*  __LITTLE_ENDIAN_BITFIELD */
-			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
-			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
-						   VALUE !! */
-#endif
-#define BUFF_TYPE_BDE_64    0x00	/* BDE (Host_resident) */
-#define BUFF_TYPE_BDE_IMMED 0x01	/* Immediate Data BDE */
-#define BUFF_TYPE_BDE_64P   0x02	/* BDE (Port-resident) */
-#define BUFF_TYPE_BDE_64I   0x08	/* Input BDE (Host-resident) */
-#define BUFF_TYPE_BDE_64IP  0x0A	/* Input BDE (Port-resident) */
-#define BUFF_TYPE_BLP_64    0x40	/* BLP (Host-resident) */
-#define BUFF_TYPE_BLP_64P   0x42	/* BLP (Port-resident) */
-		} f;
-	} tus;
-	uint32_t addrLow;
-	uint32_t addrHigh;
-};
-
 typedef struct ULP_BDL {	/* SLI-2 */
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t bdeFlags:8;	/* BDL Flags */
@@ -2287,7 +2310,7 @@
 	uint32_t rsvd3;
 	uint32_t rsvd4;
 	uint32_t rsvd5;
-	uint16_t rsvd6;
+	uint16_t vfi;
 	uint16_t vpi;
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t rsvd1;
@@ -2297,7 +2320,7 @@
 	uint32_t rsvd4;
 	uint32_t rsvd5;
 	uint16_t vpi;
-	uint16_t rsvd6;
+	uint16_t vfi;
 #endif
 } REG_VPI_VAR;
 
@@ -2457,7 +2480,7 @@
 	uint32_t entry_index:16;
 #endif
 
-	uint32_t rsvd1;
+	uint32_t sli4_length;
 	uint32_t word_cnt;
 	uint32_t resp_offset;
 } DUMP_VAR;
@@ -2470,9 +2493,32 @@
 #define  DMP_RSP_OFFSET          0x14   /* word 5 contains first word of rsp */
 #define  DMP_RSP_SIZE            0x6C   /* maximum of 27 words of rsp data */
 
+#define  DMP_REGION_VPORT	 0x16   /* VPort info region */
+#define  DMP_VPORT_REGION_SIZE	 0x200
+#define  DMP_MBOX_OFFSET_WORD	 0x5
+
+#define  DMP_REGION_FCOEPARAM	 0x17   /* fcoe param region */
+#define  DMP_FCOEPARAM_RGN_SIZE	 0x400
+
 #define  WAKE_UP_PARMS_REGION_ID    4
 #define  WAKE_UP_PARMS_WORD_SIZE   15
 
+struct vport_rec {
+	uint8_t wwpn[8];
+	uint8_t wwnn[8];
+};
+
+#define VPORT_INFO_SIG 0x32324752
+#define VPORT_INFO_REV_MASK 0xff
+#define VPORT_INFO_REV 0x1
+#define MAX_STATIC_VPORT_COUNT 16
+struct static_vport_info {
+	uint32_t 		signature;
+	uint32_t		rev;
+	struct vport_rec 	vport_list[MAX_STATIC_VPORT_COUNT];
+	uint32_t		resvd[66];
+};
+
 /* Option rom version structure */
 struct prog_id {
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -2697,7 +2743,9 @@
 #endif
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd1     : 23;  /* Reserved                             */
+	uint32_t rsvd1     : 19;  /* Reserved                             */
+	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd2     :  3;  /* Reserved                             */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
 	uint32_t cmv       :  1;  /* Configure Max VPIs                   */
 	uint32_t ccrp      :  1;  /* Config Command Ring Polling          */
@@ -2717,10 +2765,14 @@
 	uint32_t ccrp      :  1;  /* Config Command Ring Polling          */
 	uint32_t cmv	   :  1;  /* Configure Max VPIs                   */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
-	uint32_t rsvd1     : 23;  /* Reserved                             */
+	uint32_t rsvd2     :  3;  /* Reserved                             */
+	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd1     : 19;  /* Reserved                             */
 #endif
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd2     : 23;  /* Reserved                             */
+	uint32_t rsvd3     : 19;  /* Reserved                             */
+	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd4     :  3;  /* Reserved                             */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
 	uint32_t gmv	   :  1;  /* Grant Max VPIs                       */
 	uint32_t gcrp	   :  1;  /* Grant Command Ring Polling           */
@@ -2740,7 +2792,9 @@
 	uint32_t gcrp	   :  1;  /* Grant Command Ring Polling           */
 	uint32_t gmv	   :  1;  /* Grant Max VPIs                       */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
-	uint32_t rsvd2     : 23;  /* Reserved                             */
+	uint32_t rsvd4     :  3;  /* Reserved                             */
+	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd3     : 19;  /* Reserved                             */
 #endif
 
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -2753,20 +2807,20 @@
 
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t max_hbq   : 16;  /* Max HBQs Host expect to configure    */
-	uint32_t rsvd3     : 16;  /* Max HBQs Host expect to configure    */
+	uint32_t rsvd5     : 16;  /* Max HBQs Host expect to configure    */
 #else	/*  __LITTLE_ENDIAN */
-	uint32_t rsvd3     : 16;  /* Max HBQs Host expect to configure    */
+	uint32_t rsvd5     : 16;  /* Max HBQs Host expect to configure    */
 	uint32_t max_hbq   : 16;  /* Max HBQs Host expect to configure    */
 #endif
 
-	uint32_t rsvd4;           /* Reserved                             */
+	uint32_t rsvd6;           /* Reserved                             */
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd5      : 16;  /* Reserved                             */
+	uint32_t rsvd7      : 16;  /* Reserved                             */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
-	uint32_t rsvd5      : 16;  /* Reserved                             */
+	uint32_t rsvd7      : 16;  /* Reserved                             */
 #endif
 
 } CONFIG_PORT_VAR;
@@ -3666,3 +3720,5 @@
 #define MENLO_TIMEOUT 30
 #define SETVAR_MLOMNT 0x103107
 #define SETVAR_MLORST 0x103007
+
+#define BPL_ALIGN_SZ 8 /* 8 byte alignment for bpl and mbufs */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
new file mode 100644
index 0000000..39c34b3
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -0,0 +1,2141 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for         *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2009 Emulex.  All rights reserved.                *
+ * EMULEX and SLI are trademarks of Emulex.                        *
+ * www.emulex.com                                                  *
+ *                                                                 *
+ * This program is free software; you can redistribute it and/or   *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
+ *******************************************************************/
+
+/* Macros to deal with bit fields. Each bit field must have 3 #defines
+ * associated with it (_SHIFT, _MASK, and _WORD).
+ * EG. For a bit field that is in the 7th bit of the "field4" field of a
+ * structure and is 2 bits in size the following #defines must exist:
+ *	struct temp {
+ *		uint32_t	field1;
+ *		uint32_t	field2;
+ *		uint32_t	field3;
+ *		uint32_t	field4;
+ *	#define example_bit_field_SHIFT		7
+ *	#define example_bit_field_MASK		0x03
+ *	#define example_bit_field_WORD		field4
+ *		uint32_t	field5;
+ *	};
+ * Then the macros below may be used to get or set the value of that field.
+ * EG. To get the value of the bit field from the above example:
+ *	struct temp t1;
+ *	value = bf_get(example_bit_field, &t1);
+ * And then to set that bit field:
+ *	bf_set(example_bit_field, &t1, 2);
+ * Or clear that bit field:
+ *	bf_set(example_bit_field, &t1, 0);
+ */
+#define bf_get(name, ptr) \
+	(((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK)
+#define bf_set(name, ptr, value) \
+	((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
+		 ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
+
+struct dma_address {
+	uint32_t addr_lo;
+	uint32_t addr_hi;
+};
+
+#define LPFC_SLI4_BAR0		1
+#define LPFC_SLI4_BAR1		2
+#define LPFC_SLI4_BAR2		4
+
+#define LPFC_SLI4_MBX_EMBED	true
+#define LPFC_SLI4_MBX_NEMBED	false
+
+#define LPFC_SLI4_MB_WORD_COUNT		64
+#define LPFC_MAX_MQ_PAGE		8
+#define LPFC_MAX_WQ_PAGE		8
+#define LPFC_MAX_CQ_PAGE		4
+#define LPFC_MAX_EQ_PAGE		8
+
+#define LPFC_VIR_FUNC_MAX       32 /* Maximum number of virtual functions */
+#define LPFC_PCI_FUNC_MAX        5 /* Maximum number of PCI functions */
+#define LPFC_VFR_PAGE_SIZE	0x1000 /* 4KB BAR2 per-VF register page size */
+
+/* Define SLI4 Alignment requirements. */
+#define LPFC_ALIGN_16_BYTE	16
+#define LPFC_ALIGN_64_BYTE	64
+
+/* Define SLI4 specific definitions. */
+#define LPFC_MQ_CQE_BYTE_OFFSET	256
+#define LPFC_MBX_CMD_HDR_LENGTH 16
+#define LPFC_MBX_ERROR_RANGE	0x4000
+#define LPFC_BMBX_BIT1_ADDR_HI	0x2
+#define LPFC_BMBX_BIT1_ADDR_LO	0
+#define LPFC_RPI_HDR_COUNT	64
+#define LPFC_HDR_TEMPLATE_SIZE	4096
+#define LPFC_RPI_ALLOC_ERROR 	0xFFFF
+#define LPFC_FCF_RECORD_WD_CNT	132
+#define LPFC_ENTIRE_FCF_DATABASE 0
+#define LPFC_DFLT_FCF_INDEX	 0
+
+/* Virtual function numbers */
+#define LPFC_VF0		0
+#define LPFC_VF1		1
+#define LPFC_VF2		2
+#define LPFC_VF3		3
+#define LPFC_VF4		4
+#define LPFC_VF5		5
+#define LPFC_VF6		6
+#define LPFC_VF7		7
+#define LPFC_VF8		8
+#define LPFC_VF9		9
+#define LPFC_VF10		10
+#define LPFC_VF11		11
+#define LPFC_VF12		12
+#define LPFC_VF13		13
+#define LPFC_VF14		14
+#define LPFC_VF15		15
+#define LPFC_VF16		16
+#define LPFC_VF17		17
+#define LPFC_VF18		18
+#define LPFC_VF19		19
+#define LPFC_VF20		20
+#define LPFC_VF21		21
+#define LPFC_VF22		22
+#define LPFC_VF23		23
+#define LPFC_VF24		24
+#define LPFC_VF25		25
+#define LPFC_VF26		26
+#define LPFC_VF27		27
+#define LPFC_VF28		28
+#define LPFC_VF29		29
+#define LPFC_VF30		30
+#define LPFC_VF31		31
+
+/* PCI function numbers */
+#define LPFC_PCI_FUNC0		0
+#define LPFC_PCI_FUNC1		1
+#define LPFC_PCI_FUNC2		2
+#define LPFC_PCI_FUNC3		3
+#define LPFC_PCI_FUNC4		4
+
+/* Active interrupt test count */
+#define LPFC_ACT_INTR_CNT	4
+
+/* Delay Multiplier constant */
+#define LPFC_DMULT_CONST       651042
+#define LPFC_MIM_IMAX          636
+#define LPFC_FP_DEF_IMAX       10000
+#define LPFC_SP_DEF_IMAX       10000
+
+struct ulp_bde64 {
+	union ULP_BDE_TUS {
+		uint32_t w;
+		struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
+						   VALUE !! */
+			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
+#else	/*  __LITTLE_ENDIAN_BITFIELD */
+			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
+			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
+						   VALUE !! */
+#endif
+#define BUFF_TYPE_BDE_64    0x00	/* BDE (Host_resident) */
+#define BUFF_TYPE_BDE_IMMED 0x01	/* Immediate Data BDE */
+#define BUFF_TYPE_BDE_64P   0x02	/* BDE (Port-resident) */
+#define BUFF_TYPE_BDE_64I   0x08	/* Input BDE (Host-resident) */
+#define BUFF_TYPE_BDE_64IP  0x0A	/* Input BDE (Port-resident) */
+#define BUFF_TYPE_BLP_64    0x40	/* BLP (Host-resident) */
+#define BUFF_TYPE_BLP_64P   0x42	/* BLP (Port-resident) */
+		} f;
+	} tus;
+	uint32_t addrLow;
+	uint32_t addrHigh;
+};
+
+struct lpfc_sli4_flags {
+	uint32_t word0;
+#define lpfc_fip_flag_SHIFT 0
+#define lpfc_fip_flag_MASK 0x00000001
+#define lpfc_fip_flag_WORD word0
+};
+
+/* event queue entry structure */
+struct lpfc_eqe {
+	uint32_t word0;
+#define lpfc_eqe_resource_id_SHIFT	16
+#define lpfc_eqe_resource_id_MASK	0x000000FF
+#define lpfc_eqe_resource_id_WORD	word0
+#define lpfc_eqe_minor_code_SHIFT	4
+#define lpfc_eqe_minor_code_MASK	0x00000FFF
+#define lpfc_eqe_minor_code_WORD	word0
+#define lpfc_eqe_major_code_SHIFT	1
+#define lpfc_eqe_major_code_MASK	0x00000007
+#define lpfc_eqe_major_code_WORD	word0
+#define lpfc_eqe_valid_SHIFT		0
+#define lpfc_eqe_valid_MASK		0x00000001
+#define lpfc_eqe_valid_WORD		word0
+};
+
+/* completion queue entry structure (common fields for all cqe types) */
+struct lpfc_cqe {
+	uint32_t reserved0;
+	uint32_t reserved1;
+	uint32_t reserved2;
+	uint32_t word3;
+#define lpfc_cqe_valid_SHIFT		31
+#define lpfc_cqe_valid_MASK		0x00000001
+#define lpfc_cqe_valid_WORD		word3
+#define lpfc_cqe_code_SHIFT		16
+#define lpfc_cqe_code_MASK		0x000000FF
+#define lpfc_cqe_code_WORD		word3
+};
+
+/* Completion Queue Entry Status Codes */
+#define CQE_STATUS_SUCCESS		0x0
+#define CQE_STATUS_FCP_RSP_FAILURE	0x1
+#define CQE_STATUS_REMOTE_STOP		0x2
+#define CQE_STATUS_LOCAL_REJECT		0x3
+#define CQE_STATUS_NPORT_RJT		0x4
+#define CQE_STATUS_FABRIC_RJT		0x5
+#define CQE_STATUS_NPORT_BSY		0x6
+#define CQE_STATUS_FABRIC_BSY		0x7
+#define CQE_STATUS_INTERMED_RSP		0x8
+#define CQE_STATUS_LS_RJT		0x9
+#define CQE_STATUS_CMD_REJECT		0xb
+#define CQE_STATUS_FCP_TGT_LENCHECK	0xc
+#define CQE_STATUS_NEED_BUFF_ENTRY	0xf
+
+/* Status returned by hardware (valid only if status = CQE_STATUS_SUCCESS). */
+#define CQE_HW_STATUS_NO_ERR		0x0
+#define CQE_HW_STATUS_UNDERRUN		0x1
+#define CQE_HW_STATUS_OVERRUN		0x2
+
+/* Completion Queue Entry Codes */
+#define CQE_CODE_COMPL_WQE		0x1
+#define CQE_CODE_RELEASE_WQE		0x2
+#define CQE_CODE_RECEIVE		0x4
+#define CQE_CODE_XRI_ABORTED		0x5
+
+/* completion queue entry for wqe completions */
+struct lpfc_wcqe_complete {
+	uint32_t word0;
+#define lpfc_wcqe_c_request_tag_SHIFT	16
+#define lpfc_wcqe_c_request_tag_MASK	0x0000FFFF
+#define lpfc_wcqe_c_request_tag_WORD	word0
+#define lpfc_wcqe_c_status_SHIFT	8
+#define lpfc_wcqe_c_status_MASK		0x000000FF
+#define lpfc_wcqe_c_status_WORD		word0
+#define lpfc_wcqe_c_hw_status_SHIFT	0
+#define lpfc_wcqe_c_hw_status_MASK	0x000000FF
+#define lpfc_wcqe_c_hw_status_WORD	word0
+	uint32_t total_data_placed;
+	uint32_t parameter;
+	uint32_t word3;
+#define lpfc_wcqe_c_valid_SHIFT		lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_c_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_wcqe_c_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_wcqe_c_xb_SHIFT		28
+#define lpfc_wcqe_c_xb_MASK		0x00000001
+#define lpfc_wcqe_c_xb_WORD		word3
+#define lpfc_wcqe_c_pv_SHIFT		27
+#define lpfc_wcqe_c_pv_MASK		0x00000001
+#define lpfc_wcqe_c_pv_WORD		word3
+#define lpfc_wcqe_c_priority_SHIFT	24
+#define lpfc_wcqe_c_priority_MASK		0x00000007
+#define lpfc_wcqe_c_priority_WORD		word3
+#define lpfc_wcqe_c_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_c_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_wcqe_c_code_WORD		lpfc_cqe_code_WORD
+};
+
+/* completion queue entry for wqe release */
+struct lpfc_wcqe_release {
+	uint32_t reserved0;
+	uint32_t reserved1;
+	uint32_t word2;
+#define lpfc_wcqe_r_wq_id_SHIFT		16
+#define lpfc_wcqe_r_wq_id_MASK		0x0000FFFF
+#define lpfc_wcqe_r_wq_id_WORD		word2
+#define lpfc_wcqe_r_wqe_index_SHIFT	0
+#define lpfc_wcqe_r_wqe_index_MASK	0x0000FFFF
+#define lpfc_wcqe_r_wqe_index_WORD	word2
+	uint32_t word3;
+#define lpfc_wcqe_r_valid_SHIFT		lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_r_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_wcqe_r_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_wcqe_r_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_r_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_wcqe_r_code_WORD		lpfc_cqe_code_WORD
+};
+
+struct sli4_wcqe_xri_aborted {
+	uint32_t word0;
+#define lpfc_wcqe_xa_status_SHIFT		8
+#define lpfc_wcqe_xa_status_MASK		0x000000FF
+#define lpfc_wcqe_xa_status_WORD		word0
+	uint32_t parameter;
+	uint32_t word2;
+#define lpfc_wcqe_xa_remote_xid_SHIFT	16
+#define lpfc_wcqe_xa_remote_xid_MASK	0x0000FFFF
+#define lpfc_wcqe_xa_remote_xid_WORD	word2
+#define lpfc_wcqe_xa_xri_SHIFT		0
+#define lpfc_wcqe_xa_xri_MASK		0x0000FFFF
+#define lpfc_wcqe_xa_xri_WORD		word2
+	uint32_t word3;
+#define lpfc_wcqe_xa_valid_SHIFT	lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_xa_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_wcqe_xa_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_wcqe_xa_ia_SHIFT		30
+#define lpfc_wcqe_xa_ia_MASK		0x00000001
+#define lpfc_wcqe_xa_ia_WORD		word3
+#define CQE_XRI_ABORTED_IA_REMOTE	0
+#define CQE_XRI_ABORTED_IA_LOCAL	1
+#define lpfc_wcqe_xa_br_SHIFT		29
+#define lpfc_wcqe_xa_br_MASK		0x00000001
+#define lpfc_wcqe_xa_br_WORD		word3
+#define CQE_XRI_ABORTED_BR_BA_ACC	0
+#define CQE_XRI_ABORTED_BR_BA_RJT	1
+#define lpfc_wcqe_xa_eo_SHIFT		28
+#define lpfc_wcqe_xa_eo_MASK		0x00000001
+#define lpfc_wcqe_xa_eo_WORD		word3
+#define CQE_XRI_ABORTED_EO_REMOTE	0
+#define CQE_XRI_ABORTED_EO_LOCAL	1
+#define lpfc_wcqe_xa_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_xa_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_wcqe_xa_code_WORD		lpfc_cqe_code_WORD
+};
+
+/* completion queue entry structure for rqe completion */
+struct lpfc_rcqe {
+	uint32_t word0;
+#define lpfc_rcqe_bindex_SHIFT		16
+#define lpfc_rcqe_bindex_MASK		0x0000FFF
+#define lpfc_rcqe_bindex_WORD		word0
+#define lpfc_rcqe_status_SHIFT		8
+#define lpfc_rcqe_status_MASK		0x000000FF
+#define lpfc_rcqe_status_WORD		word0
+#define FC_STATUS_RQ_SUCCESS		0x10 /* Async receive successful */
+#define FC_STATUS_RQ_BUF_LEN_EXCEEDED 	0x11 /* payload truncated */
+#define FC_STATUS_INSUFF_BUF_NEED_BUF 	0x12 /* Insufficient buffers */
+#define FC_STATUS_INSUFF_BUF_FRM_DISC 	0x13 /* Frame Discard */
+	uint32_t reserved1;
+	uint32_t word2;
+#define lpfc_rcqe_length_SHIFT		16
+#define lpfc_rcqe_length_MASK		0x0000FFFF
+#define lpfc_rcqe_length_WORD		word2
+#define lpfc_rcqe_rq_id_SHIFT		6
+#define lpfc_rcqe_rq_id_MASK		0x000003FF
+#define lpfc_rcqe_rq_id_WORD		word2
+#define lpfc_rcqe_fcf_id_SHIFT		0
+#define lpfc_rcqe_fcf_id_MASK		0x0000003F
+#define lpfc_rcqe_fcf_id_WORD		word2
+	uint32_t word3;
+#define lpfc_rcqe_valid_SHIFT		lpfc_cqe_valid_SHIFT
+#define lpfc_rcqe_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_rcqe_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_rcqe_port_SHIFT		30
+#define lpfc_rcqe_port_MASK		0x00000001
+#define lpfc_rcqe_port_WORD		word3
+#define lpfc_rcqe_hdr_length_SHIFT	24
+#define lpfc_rcqe_hdr_length_MASK	0x0000001F
+#define lpfc_rcqe_hdr_length_WORD	word3
+#define lpfc_rcqe_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_rcqe_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_rcqe_code_WORD		lpfc_cqe_code_WORD
+#define lpfc_rcqe_eof_SHIFT		8
+#define lpfc_rcqe_eof_MASK		0x000000FF
+#define lpfc_rcqe_eof_WORD		word3
+#define FCOE_EOFn	0x41
+#define FCOE_EOFt	0x42
+#define FCOE_EOFni	0x49
+#define FCOE_EOFa	0x50
+#define lpfc_rcqe_sof_SHIFT		0
+#define lpfc_rcqe_sof_MASK		0x000000FF
+#define lpfc_rcqe_sof_WORD		word3
+#define FCOE_SOFi2	0x2d
+#define FCOE_SOFi3	0x2e
+#define FCOE_SOFn2	0x35
+#define FCOE_SOFn3	0x36
+};
+
+struct lpfc_wqe_generic{
+	struct ulp_bde64 bde;
+	uint32_t word3;
+	uint32_t word4;
+	uint32_t word5;
+	uint32_t word6;
+#define lpfc_wqe_gen_context_SHIFT	16
+#define lpfc_wqe_gen_context_MASK	0x0000FFFF
+#define lpfc_wqe_gen_context_WORD	word6
+#define lpfc_wqe_gen_xri_SHIFT		0
+#define lpfc_wqe_gen_xri_MASK		0x0000FFFF
+#define lpfc_wqe_gen_xri_WORD		word6
+	uint32_t word7;
+#define lpfc_wqe_gen_lnk_SHIFT		23
+#define lpfc_wqe_gen_lnk_MASK		0x00000001
+#define lpfc_wqe_gen_lnk_WORD		word7
+#define lpfc_wqe_gen_erp_SHIFT		22
+#define lpfc_wqe_gen_erp_MASK		0x00000001
+#define lpfc_wqe_gen_erp_WORD		word7
+#define lpfc_wqe_gen_pu_SHIFT		20
+#define lpfc_wqe_gen_pu_MASK		0x00000003
+#define lpfc_wqe_gen_pu_WORD		word7
+#define lpfc_wqe_gen_class_SHIFT	16
+#define lpfc_wqe_gen_class_MASK		0x00000007
+#define lpfc_wqe_gen_class_WORD		word7
+#define lpfc_wqe_gen_command_SHIFT	8
+#define lpfc_wqe_gen_command_MASK	0x000000FF
+#define lpfc_wqe_gen_command_WORD	word7
+#define lpfc_wqe_gen_status_SHIFT	4
+#define lpfc_wqe_gen_status_MASK	0x0000000F
+#define lpfc_wqe_gen_status_WORD	word7
+#define lpfc_wqe_gen_ct_SHIFT		2
+#define lpfc_wqe_gen_ct_MASK		0x00000007
+#define lpfc_wqe_gen_ct_WORD		word7
+	uint32_t abort_tag;
+	uint32_t word9;
+#define lpfc_wqe_gen_request_tag_SHIFT	0
+#define lpfc_wqe_gen_request_tag_MASK	0x0000FFFF
+#define lpfc_wqe_gen_request_tag_WORD	word9
+	uint32_t word10;
+#define lpfc_wqe_gen_ccp_SHIFT		24
+#define lpfc_wqe_gen_ccp_MASK		0x000000FF
+#define lpfc_wqe_gen_ccp_WORD		word10
+#define lpfc_wqe_gen_ccpe_SHIFT		23
+#define lpfc_wqe_gen_ccpe_MASK		0x00000001
+#define lpfc_wqe_gen_ccpe_WORD		word10
+#define lpfc_wqe_gen_pv_SHIFT		19
+#define lpfc_wqe_gen_pv_MASK		0x00000001
+#define lpfc_wqe_gen_pv_WORD		word10
+#define lpfc_wqe_gen_pri_SHIFT		16
+#define lpfc_wqe_gen_pri_MASK		0x00000007
+#define lpfc_wqe_gen_pri_WORD		word10
+	uint32_t word11;
+#define lpfc_wqe_gen_cq_id_SHIFT	16
+#define lpfc_wqe_gen_cq_id_MASK		0x000003FF
+#define lpfc_wqe_gen_cq_id_WORD		word11
+#define LPFC_WQE_CQ_ID_DEFAULT	0x3ff
+#define lpfc_wqe_gen_wqec_SHIFT		7
+#define lpfc_wqe_gen_wqec_MASK		0x00000001
+#define lpfc_wqe_gen_wqec_WORD		word11
+#define lpfc_wqe_gen_cmd_type_SHIFT	0
+#define lpfc_wqe_gen_cmd_type_MASK	0x0000000F
+#define lpfc_wqe_gen_cmd_type_WORD	word11
+	uint32_t payload[4];
+};
+
+struct lpfc_rqe {
+	uint32_t address_hi;
+	uint32_t address_lo;
+};
+
+/* buffer descriptors */
+struct lpfc_bde4 {
+	uint32_t addr_hi;
+	uint32_t addr_lo;
+	uint32_t word2;
+#define lpfc_bde4_last_SHIFT		31
+#define lpfc_bde4_last_MASK		0x00000001
+#define lpfc_bde4_last_WORD		word2
+#define lpfc_bde4_sge_offset_SHIFT	0
+#define lpfc_bde4_sge_offset_MASK	0x000003FF
+#define lpfc_bde4_sge_offset_WORD	word2
+	uint32_t word3;
+#define lpfc_bde4_length_SHIFT		0
+#define lpfc_bde4_length_MASK		0x000000FF
+#define lpfc_bde4_length_WORD		word3
+};
+
+struct lpfc_register {
+	uint32_t word0;
+};
+
+#define LPFC_UERR_STATUS_HI		0x00A4
+#define LPFC_UERR_STATUS_LO		0x00A0
+#define LPFC_ONLINE0			0x00B0
+#define LPFC_ONLINE1			0x00B4
+#define LPFC_SCRATCHPAD			0x0058
+
+/* BAR0 Registers */
+#define LPFC_HST_STATE			0x00AC
+#define lpfc_hst_state_perr_SHIFT	31
+#define lpfc_hst_state_perr_MASK	0x1
+#define lpfc_hst_state_perr_WORD	word0
+#define lpfc_hst_state_sfi_SHIFT	30
+#define lpfc_hst_state_sfi_MASK		0x1
+#define lpfc_hst_state_sfi_WORD		word0
+#define lpfc_hst_state_nip_SHIFT	29
+#define lpfc_hst_state_nip_MASK		0x1
+#define lpfc_hst_state_nip_WORD		word0
+#define lpfc_hst_state_ipc_SHIFT	28
+#define lpfc_hst_state_ipc_MASK		0x1
+#define lpfc_hst_state_ipc_WORD		word0
+#define lpfc_hst_state_xrom_SHIFT	27
+#define lpfc_hst_state_xrom_MASK	0x1
+#define lpfc_hst_state_xrom_WORD	word0
+#define lpfc_hst_state_dl_SHIFT		26
+#define lpfc_hst_state_dl_MASK		0x1
+#define lpfc_hst_state_dl_WORD		word0
+#define lpfc_hst_state_port_status_SHIFT	0
+#define lpfc_hst_state_port_status_MASK		0xFFFF
+#define lpfc_hst_state_port_status_WORD		word0
+
+#define LPFC_POST_STAGE_POWER_ON_RESET			0x0000
+#define LPFC_POST_STAGE_AWAITING_HOST_RDY		0x0001
+#define LPFC_POST_STAGE_HOST_RDY			0x0002
+#define LPFC_POST_STAGE_BE_RESET			0x0003
+#define LPFC_POST_STAGE_SEEPROM_CS_START		0x0100
+#define LPFC_POST_STAGE_SEEPROM_CS_DONE			0x0101
+#define LPFC_POST_STAGE_DDR_CONFIG_START		0x0200
+#define LPFC_POST_STAGE_DDR_CONFIG_DONE			0x0201
+#define LPFC_POST_STAGE_DDR_CALIBRATE_START		0x0300
+#define LPFC_POST_STAGE_DDR_CALIBRATE_DONE		0x0301
+#define LPFC_POST_STAGE_DDR_TEST_START			0x0400
+#define LPFC_POST_STAGE_DDR_TEST_DONE			0x0401
+#define LPFC_POST_STAGE_REDBOOT_INIT_START		0x0600
+#define LPFC_POST_STAGE_REDBOOT_INIT_DONE		0x0601
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_START		0x0700
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_DONE		0x0701
+#define LPFC_POST_STAGE_ARMFW_START			0x0800
+#define LPFC_POST_STAGE_DHCP_QUERY_START		0x0900
+#define LPFC_POST_STAGE_DHCP_QUERY_DONE			0x0901
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_START	0x0A00
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_DONE	0x0A01
+#define LPFC_POST_STAGE_RC_OPTION_SET			0x0B00
+#define LPFC_POST_STAGE_SWITCH_LINK			0x0B01
+#define LPFC_POST_STAGE_SEND_ICDS_MESSAGE		0x0B02
+#define LPFC_POST_STAGE_PERFROM_TFTP			0x0B03
+#define LPFC_POST_STAGE_PARSE_XML			0x0B04
+#define LPFC_POST_STAGE_DOWNLOAD_IMAGE			0x0B05
+#define LPFC_POST_STAGE_FLASH_IMAGE			0x0B06
+#define LPFC_POST_STAGE_RC_DONE				0x0B07
+#define LPFC_POST_STAGE_REBOOT_SYSTEM			0x0B08
+#define LPFC_POST_STAGE_MAC_ADDRESS			0x0C00
+#define LPFC_POST_STAGE_ARMFW_READY			0xC000
+#define LPFC_POST_STAGE_ARMFW_UE 			0xF000
+
+#define lpfc_scratchpad_slirev_SHIFT			4
+#define lpfc_scratchpad_slirev_MASK			0xF
+#define lpfc_scratchpad_slirev_WORD			word0
+#define lpfc_scratchpad_chiptype_SHIFT			8
+#define lpfc_scratchpad_chiptype_MASK			0xFF
+#define lpfc_scratchpad_chiptype_WORD			word0
+#define lpfc_scratchpad_featurelevel1_SHIFT		16
+#define lpfc_scratchpad_featurelevel1_MASK		0xFF
+#define lpfc_scratchpad_featurelevel1_WORD		word0
+#define lpfc_scratchpad_featurelevel2_SHIFT		24
+#define lpfc_scratchpad_featurelevel2_MASK		0xFF
+#define lpfc_scratchpad_featurelevel2_WORD		word0
+
+/* BAR1 Registers */
+#define LPFC_IMR_MASK_ALL	0xFFFFFFFF
+#define LPFC_ISCR_CLEAR_ALL	0xFFFFFFFF
+
+#define LPFC_HST_ISR0		0x0C18
+#define LPFC_HST_ISR1		0x0C1C
+#define LPFC_HST_ISR2		0x0C20
+#define LPFC_HST_ISR3		0x0C24
+#define LPFC_HST_ISR4		0x0C28
+
+#define LPFC_HST_IMR0		0x0C48
+#define LPFC_HST_IMR1		0x0C4C
+#define LPFC_HST_IMR2		0x0C50
+#define LPFC_HST_IMR3		0x0C54
+#define LPFC_HST_IMR4		0x0C58
+
+#define LPFC_HST_ISCR0		0x0C78
+#define LPFC_HST_ISCR1		0x0C7C
+#define LPFC_HST_ISCR2		0x0C80
+#define LPFC_HST_ISCR3		0x0C84
+#define LPFC_HST_ISCR4		0x0C88
+
+#define LPFC_SLI4_INTR0			BIT0
+#define LPFC_SLI4_INTR1			BIT1
+#define LPFC_SLI4_INTR2			BIT2
+#define LPFC_SLI4_INTR3			BIT3
+#define LPFC_SLI4_INTR4			BIT4
+#define LPFC_SLI4_INTR5			BIT5
+#define LPFC_SLI4_INTR6			BIT6
+#define LPFC_SLI4_INTR7			BIT7
+#define LPFC_SLI4_INTR8			BIT8
+#define LPFC_SLI4_INTR9			BIT9
+#define LPFC_SLI4_INTR10		BIT10
+#define LPFC_SLI4_INTR11		BIT11
+#define LPFC_SLI4_INTR12		BIT12
+#define LPFC_SLI4_INTR13		BIT13
+#define LPFC_SLI4_INTR14		BIT14
+#define LPFC_SLI4_INTR15		BIT15
+#define LPFC_SLI4_INTR16		BIT16
+#define LPFC_SLI4_INTR17		BIT17
+#define LPFC_SLI4_INTR18		BIT18
+#define LPFC_SLI4_INTR19		BIT19
+#define LPFC_SLI4_INTR20		BIT20
+#define LPFC_SLI4_INTR21		BIT21
+#define LPFC_SLI4_INTR22		BIT22
+#define LPFC_SLI4_INTR23		BIT23
+#define LPFC_SLI4_INTR24		BIT24
+#define LPFC_SLI4_INTR25		BIT25
+#define LPFC_SLI4_INTR26		BIT26
+#define LPFC_SLI4_INTR27		BIT27
+#define LPFC_SLI4_INTR28		BIT28
+#define LPFC_SLI4_INTR29		BIT29
+#define LPFC_SLI4_INTR30		BIT30
+#define LPFC_SLI4_INTR31		BIT31
+
+/* BAR2 Registers */
+#define LPFC_RQ_DOORBELL		0x00A0
+#define lpfc_rq_doorbell_num_posted_SHIFT	16
+#define lpfc_rq_doorbell_num_posted_MASK	0x3FFF
+#define lpfc_rq_doorbell_num_posted_WORD	word0
+#define LPFC_RQ_POST_BATCH		8	/* RQEs to post at one time */
+#define lpfc_rq_doorbell_id_SHIFT		0
+#define lpfc_rq_doorbell_id_MASK		0x03FF
+#define lpfc_rq_doorbell_id_WORD		word0
+
+#define LPFC_WQ_DOORBELL		0x0040
+#define lpfc_wq_doorbell_num_posted_SHIFT	24
+#define lpfc_wq_doorbell_num_posted_MASK	0x00FF
+#define lpfc_wq_doorbell_num_posted_WORD	word0
+#define lpfc_wq_doorbell_index_SHIFT		16
+#define lpfc_wq_doorbell_index_MASK		0x00FF
+#define lpfc_wq_doorbell_index_WORD		word0
+#define lpfc_wq_doorbell_id_SHIFT		0
+#define lpfc_wq_doorbell_id_MASK		0xFFFF
+#define lpfc_wq_doorbell_id_WORD		word0
+
+#define LPFC_EQCQ_DOORBELL		0x0120
+#define lpfc_eqcq_doorbell_arm_SHIFT		29
+#define lpfc_eqcq_doorbell_arm_MASK		0x0001
+#define lpfc_eqcq_doorbell_arm_WORD		word0
+#define lpfc_eqcq_doorbell_num_released_SHIFT	16
+#define lpfc_eqcq_doorbell_num_released_MASK	0x1FFF
+#define lpfc_eqcq_doorbell_num_released_WORD	word0
+#define lpfc_eqcq_doorbell_qt_SHIFT		10
+#define lpfc_eqcq_doorbell_qt_MASK		0x0001
+#define lpfc_eqcq_doorbell_qt_WORD		word0
+#define LPFC_QUEUE_TYPE_COMPLETION	0
+#define LPFC_QUEUE_TYPE_EVENT		1
+#define lpfc_eqcq_doorbell_eqci_SHIFT		9
+#define lpfc_eqcq_doorbell_eqci_MASK		0x0001
+#define lpfc_eqcq_doorbell_eqci_WORD		word0
+#define lpfc_eqcq_doorbell_cqid_SHIFT		0
+#define lpfc_eqcq_doorbell_cqid_MASK		0x03FF
+#define lpfc_eqcq_doorbell_cqid_WORD		word0
+#define lpfc_eqcq_doorbell_eqid_SHIFT		0
+#define lpfc_eqcq_doorbell_eqid_MASK		0x01FF
+#define lpfc_eqcq_doorbell_eqid_WORD		word0
+
+#define LPFC_BMBX			0x0160
+#define lpfc_bmbx_addr_SHIFT		2
+#define lpfc_bmbx_addr_MASK		0x3FFFFFFF
+#define lpfc_bmbx_addr_WORD		word0
+#define lpfc_bmbx_hi_SHIFT		1
+#define lpfc_bmbx_hi_MASK		0x0001
+#define lpfc_bmbx_hi_WORD		word0
+#define lpfc_bmbx_rdy_SHIFT		0
+#define lpfc_bmbx_rdy_MASK		0x0001
+#define lpfc_bmbx_rdy_WORD		word0
+
+#define LPFC_MQ_DOORBELL			0x0140
+#define lpfc_mq_doorbell_num_posted_SHIFT	16
+#define lpfc_mq_doorbell_num_posted_MASK	0x3FFF
+#define lpfc_mq_doorbell_num_posted_WORD	word0
+#define lpfc_mq_doorbell_id_SHIFT		0
+#define lpfc_mq_doorbell_id_MASK		0x03FF
+#define lpfc_mq_doorbell_id_WORD		word0
+
+struct lpfc_sli4_cfg_mhdr {
+	uint32_t word1;
+#define lpfc_mbox_hdr_emb_SHIFT		0
+#define lpfc_mbox_hdr_emb_MASK		0x00000001
+#define lpfc_mbox_hdr_emb_WORD		word1
+#define lpfc_mbox_hdr_sge_cnt_SHIFT	3
+#define lpfc_mbox_hdr_sge_cnt_MASK	0x0000001F
+#define lpfc_mbox_hdr_sge_cnt_WORD	word1
+	uint32_t payload_length;
+	uint32_t tag_lo;
+	uint32_t tag_hi;
+	uint32_t reserved5;
+};
+
+union lpfc_sli4_cfg_shdr {
+	struct {
+		uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT		0
+#define lpfc_mbox_hdr_opcode_MASK		0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD		word6
+#define lpfc_mbox_hdr_subsystem_SHIFT		8
+#define lpfc_mbox_hdr_subsystem_MASK		0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD		word6
+#define lpfc_mbox_hdr_port_number_SHIFT		16
+#define lpfc_mbox_hdr_port_number_MASK		0x000000FF
+#define lpfc_mbox_hdr_port_number_WORD		word6
+#define lpfc_mbox_hdr_domain_SHIFT		24
+#define lpfc_mbox_hdr_domain_MASK		0x000000FF
+#define lpfc_mbox_hdr_domain_WORD		word6
+		uint32_t timeout;
+		uint32_t request_length;
+		uint32_t reserved9;
+	} request;
+	struct {
+		uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT		0
+#define lpfc_mbox_hdr_opcode_MASK		0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD		word6
+#define lpfc_mbox_hdr_subsystem_SHIFT		8
+#define lpfc_mbox_hdr_subsystem_MASK		0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD		word6
+#define lpfc_mbox_hdr_domain_SHIFT		24
+#define lpfc_mbox_hdr_domain_MASK		0x000000FF
+#define lpfc_mbox_hdr_domain_WORD		word6
+		uint32_t word7;
+#define lpfc_mbox_hdr_status_SHIFT		0
+#define lpfc_mbox_hdr_status_MASK		0x000000FF
+#define lpfc_mbox_hdr_status_WORD		word7
+#define lpfc_mbox_hdr_add_status_SHIFT		8
+#define lpfc_mbox_hdr_add_status_MASK		0x000000FF
+#define lpfc_mbox_hdr_add_status_WORD		word7
+		uint32_t response_length;
+		uint32_t actual_response_length;
+	} response;
+};
+
+/* Mailbox structures */
+struct mbox_header {
+	struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+	union  lpfc_sli4_cfg_shdr cfg_shdr;
+};
+
+/* Subsystem Definitions */
+#define LPFC_MBOX_SUBSYSTEM_COMMON	0x1
+#define LPFC_MBOX_SUBSYSTEM_FCOE	0xC
+
+/* Device Specific Definitions */
+
+/* The HOST ENDIAN defines are in Big Endian format. */
+#define HOST_ENDIAN_LOW_WORD0   0xFF3412FF
+#define HOST_ENDIAN_HIGH_WORD1	0xFF7856FF
+
+/* Common Opcodes */
+#define LPFC_MBOX_OPCODE_CQ_CREATE		0x0C
+#define LPFC_MBOX_OPCODE_EQ_CREATE		0x0D
+#define LPFC_MBOX_OPCODE_MQ_CREATE		0x15
+#define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES	0x20
+#define LPFC_MBOX_OPCODE_NOP			0x21
+#define LPFC_MBOX_OPCODE_MQ_DESTROY		0x35
+#define LPFC_MBOX_OPCODE_CQ_DESTROY		0x36
+#define LPFC_MBOX_OPCODE_EQ_DESTROY		0x37
+#define LPFC_MBOX_OPCODE_FUNCTION_RESET		0x3D
+
+/* FCoE Opcodes */
+#define LPFC_MBOX_OPCODE_FCOE_WQ_CREATE			0x01
+#define LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY		0x02
+#define LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES		0x03
+#define LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES		0x04
+#define LPFC_MBOX_OPCODE_FCOE_RQ_CREATE			0x05
+#define LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY		0x06
+#define LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE		0x08
+#define LPFC_MBOX_OPCODE_FCOE_ADD_FCF			0x09
+#define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF		0x0A
+#define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE		0x0B
+
+/* Mailbox command structures */
+struct eq_context {
+	uint32_t word0;
+#define lpfc_eq_context_size_SHIFT	31
+#define lpfc_eq_context_size_MASK	0x00000001
+#define lpfc_eq_context_size_WORD	word0
+#define LPFC_EQE_SIZE_4			0x0
+#define LPFC_EQE_SIZE_16		0x1
+#define lpfc_eq_context_valid_SHIFT	29
+#define lpfc_eq_context_valid_MASK	0x00000001
+#define lpfc_eq_context_valid_WORD	word0
+	uint32_t word1;
+#define lpfc_eq_context_count_SHIFT	26
+#define lpfc_eq_context_count_MASK	0x00000003
+#define lpfc_eq_context_count_WORD	word1
+#define LPFC_EQ_CNT_256		0x0
+#define LPFC_EQ_CNT_512		0x1
+#define LPFC_EQ_CNT_1024	0x2
+#define LPFC_EQ_CNT_2048	0x3
+#define LPFC_EQ_CNT_4096	0x4
+	uint32_t word2;
+#define lpfc_eq_context_delay_multi_SHIFT	13
+#define lpfc_eq_context_delay_multi_MASK	0x000003FF
+#define lpfc_eq_context_delay_multi_WORD	word2
+	uint32_t reserved3;
+};
+
+struct sgl_page_pairs {
+	uint32_t sgl_pg0_addr_lo;
+	uint32_t sgl_pg0_addr_hi;
+	uint32_t sgl_pg1_addr_lo;
+	uint32_t sgl_pg1_addr_hi;
+};
+
+struct lpfc_mbx_post_sgl_pages {
+	struct mbox_header header;
+	uint32_t word0;
+#define lpfc_post_sgl_pages_xri_SHIFT	0
+#define lpfc_post_sgl_pages_xri_MASK	0x0000FFFF
+#define lpfc_post_sgl_pages_xri_WORD	word0
+#define lpfc_post_sgl_pages_xricnt_SHIFT	16
+#define lpfc_post_sgl_pages_xricnt_MASK	0x0000FFFF
+#define lpfc_post_sgl_pages_xricnt_WORD	word0
+	struct sgl_page_pairs  sgl_pg_pairs[1];
+};
+
+/* word0 of page-1 struct shares the same SHIFT/MASK/WORD defines as above */
+struct lpfc_mbx_post_uembed_sgl_page1 {
+	union  lpfc_sli4_cfg_shdr cfg_shdr;
+	uint32_t word0;
+	struct sgl_page_pairs sgl_pg_pairs;
+};
+
+struct lpfc_mbx_sge {
+	uint32_t pa_lo;
+	uint32_t pa_hi;
+	uint32_t length;
+};
+
+struct lpfc_mbx_nembed_cmd {
+	struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+#define LPFC_SLI4_MBX_SGE_MAX_PAGES	19
+	struct lpfc_mbx_sge sge[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_nembed_sge_virt {
+	void *addr[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_eq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_eq_create_num_pages_SHIFT	0
+#define lpfc_mbx_eq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_eq_create_num_pages_WORD	word0
+			struct eq_context context;
+			struct dma_address page[LPFC_MAX_EQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_eq_create_q_id_SHIFT	0
+#define lpfc_mbx_eq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_eq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_eq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_eq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_eq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_eq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_nop {
+	struct mbox_header header;
+	uint32_t context[2];
+};
+
+struct cq_context {
+	uint32_t word0;
+#define lpfc_cq_context_event_SHIFT	31
+#define lpfc_cq_context_event_MASK	0x00000001
+#define lpfc_cq_context_event_WORD	word0
+#define lpfc_cq_context_valid_SHIFT	29
+#define lpfc_cq_context_valid_MASK	0x00000001
+#define lpfc_cq_context_valid_WORD	word0
+#define lpfc_cq_context_count_SHIFT	27
+#define lpfc_cq_context_count_MASK	0x00000003
+#define lpfc_cq_context_count_WORD	word0
+#define LPFC_CQ_CNT_256		0x0
+#define LPFC_CQ_CNT_512		0x1
+#define LPFC_CQ_CNT_1024	0x2
+	uint32_t word1;
+#define lpfc_cq_eq_id_SHIFT		22
+#define lpfc_cq_eq_id_MASK		0x000000FF
+#define lpfc_cq_eq_id_WORD		word1
+	uint32_t reserved0;
+	uint32_t reserved1;
+};
+
+struct lpfc_mbx_cq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_cq_create_num_pages_SHIFT	0
+#define lpfc_mbx_cq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_cq_create_num_pages_WORD	word0
+			struct cq_context context;
+			struct dma_address page[LPFC_MAX_CQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_cq_create_q_id_SHIFT	0
+#define lpfc_mbx_cq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_cq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_cq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_cq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_cq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_cq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct wq_context {
+	uint32_t reserved0;
+	uint32_t reserved1;
+	uint32_t reserved2;
+	uint32_t reserved3;
+};
+
+struct lpfc_mbx_wq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_create_num_pages_SHIFT	0
+#define lpfc_mbx_wq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_wq_create_num_pages_WORD	word0
+#define lpfc_mbx_wq_create_cq_id_SHIFT		16
+#define lpfc_mbx_wq_create_cq_id_MASK		0x0000FFFF
+#define lpfc_mbx_wq_create_cq_id_WORD		word0
+			struct dma_address page[LPFC_MAX_WQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_create_q_id_SHIFT	0
+#define lpfc_mbx_wq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_wq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_wq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_wq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_wq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+#define LPFC_HDR_BUF_SIZE 128
+#define LPFC_DATA_BUF_SIZE 4096
+struct rq_context {
+	uint32_t word0;
+#define lpfc_rq_context_rq_size_SHIFT	16
+#define lpfc_rq_context_rq_size_MASK	0x0000000F
+#define lpfc_rq_context_rq_size_WORD	word0
+#define LPFC_RQ_RING_SIZE_512		9	/* 512 entries */
+#define LPFC_RQ_RING_SIZE_1024		10	/* 1024 entries */
+#define LPFC_RQ_RING_SIZE_2048		11	/* 2048 entries */
+#define LPFC_RQ_RING_SIZE_4096		12	/* 4096 entries */
+	uint32_t reserved1;
+	uint32_t word2;
+#define lpfc_rq_context_cq_id_SHIFT	16
+#define lpfc_rq_context_cq_id_MASK	0x000003FF
+#define lpfc_rq_context_cq_id_WORD	word2
+#define lpfc_rq_context_buf_size_SHIFT	0
+#define lpfc_rq_context_buf_size_MASK	0x0000FFFF
+#define lpfc_rq_context_buf_size_WORD	word2
+	uint32_t reserved3;
+};
+
+struct lpfc_mbx_rq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_rq_create_num_pages_SHIFT	0
+#define lpfc_mbx_rq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_rq_create_num_pages_WORD	word0
+			struct rq_context context;
+			struct dma_address page[LPFC_MAX_WQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_rq_create_q_id_SHIFT	0
+#define lpfc_mbx_rq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_rq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_rq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_rq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_rq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_rq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct mq_context {
+	uint32_t word0;
+#define lpfc_mq_context_cq_id_SHIFT	22
+#define lpfc_mq_context_cq_id_MASK	0x000003FF
+#define lpfc_mq_context_cq_id_WORD	word0
+#define lpfc_mq_context_count_SHIFT	16
+#define lpfc_mq_context_count_MASK	0x0000000F
+#define lpfc_mq_context_count_WORD	word0
+#define LPFC_MQ_CNT_16		0x5
+#define LPFC_MQ_CNT_32		0x6
+#define LPFC_MQ_CNT_64		0x7
+#define LPFC_MQ_CNT_128		0x8
+	uint32_t word1;
+#define lpfc_mq_context_valid_SHIFT	31
+#define lpfc_mq_context_valid_MASK	0x00000001
+#define lpfc_mq_context_valid_WORD	word1
+	uint32_t reserved2;
+	uint32_t reserved3;
+};
+
+struct lpfc_mbx_mq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_mq_create_num_pages_SHIFT	0
+#define lpfc_mbx_mq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_mq_create_num_pages_WORD	word0
+			struct mq_context context;
+			struct dma_address page[LPFC_MAX_MQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_mq_create_q_id_SHIFT	0
+#define lpfc_mbx_mq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_mq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_mq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_mq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_mq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_mq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_post_hdr_tmpl {
+	struct mbox_header header;
+	uint32_t word10;
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_SHIFT  0
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_MASK   0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_WORD   word10
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_SHIFT   16
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_MASK    0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_WORD    word10
+	uint32_t rpi_paddr_lo;
+	uint32_t rpi_paddr_hi;
+};
+
+struct sli4_sge {	/* SLI-4 */
+	uint32_t addr_hi;
+	uint32_t addr_lo;
+
+	uint32_t word2;
+#define lpfc_sli4_sge_offset_SHIFT	0 /* Offset of buffer - Not used*/
+#define lpfc_sli4_sge_offset_MASK	0x00FFFFFF
+#define lpfc_sli4_sge_offset_WORD	word2
+#define lpfc_sli4_sge_last_SHIFT	31 /* Last SEG in the SGL sets
+						this  flag !! */
+#define lpfc_sli4_sge_last_MASK		0x00000001
+#define lpfc_sli4_sge_last_WORD		word2
+	uint32_t word3;
+#define lpfc_sli4_sge_len_SHIFT		0
+#define lpfc_sli4_sge_len_MASK		0x0001FFFF
+#define lpfc_sli4_sge_len_WORD		word3
+};
+
+struct fcf_record {
+	uint32_t max_rcv_size;
+	uint32_t fka_adv_period;
+	uint32_t fip_priority;
+	uint32_t word3;
+#define lpfc_fcf_record_mac_0_SHIFT		0
+#define lpfc_fcf_record_mac_0_MASK		0x000000FF
+#define lpfc_fcf_record_mac_0_WORD		word3
+#define lpfc_fcf_record_mac_1_SHIFT		8
+#define lpfc_fcf_record_mac_1_MASK		0x000000FF
+#define lpfc_fcf_record_mac_1_WORD		word3
+#define lpfc_fcf_record_mac_2_SHIFT		16
+#define lpfc_fcf_record_mac_2_MASK		0x000000FF
+#define lpfc_fcf_record_mac_2_WORD		word3
+#define lpfc_fcf_record_mac_3_SHIFT		24
+#define lpfc_fcf_record_mac_3_MASK		0x000000FF
+#define lpfc_fcf_record_mac_3_WORD		word3
+	uint32_t word4;
+#define lpfc_fcf_record_mac_4_SHIFT		0
+#define lpfc_fcf_record_mac_4_MASK		0x000000FF
+#define lpfc_fcf_record_mac_4_WORD		word4
+#define lpfc_fcf_record_mac_5_SHIFT		8
+#define lpfc_fcf_record_mac_5_MASK		0x000000FF
+#define lpfc_fcf_record_mac_5_WORD		word4
+#define lpfc_fcf_record_fcf_avail_SHIFT		16
+#define lpfc_fcf_record_fcf_avail_MASK		0x000000FF
+#define lpfc_fcf_record_fc_avail_WORD		word4
+#define lpfc_fcf_record_mac_addr_prov_SHIFT	24
+#define lpfc_fcf_record_mac_addr_prov_MASK	0x000000FF
+#define lpfc_fcf_record_mac_addr_prov_WORD	word4
+#define LPFC_FCF_FPMA           1 	/* Fabric Provided MAC Address */
+#define LPFC_FCF_SPMA           2       /* Server Provided MAC Address */
+	uint32_t word5;
+#define lpfc_fcf_record_fab_name_0_SHIFT	0
+#define lpfc_fcf_record_fab_name_0_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_0_WORD		word5
+#define lpfc_fcf_record_fab_name_1_SHIFT	8
+#define lpfc_fcf_record_fab_name_1_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_1_WORD		word5
+#define lpfc_fcf_record_fab_name_2_SHIFT	16
+#define lpfc_fcf_record_fab_name_2_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_2_WORD		word5
+#define lpfc_fcf_record_fab_name_3_SHIFT	24
+#define lpfc_fcf_record_fab_name_3_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_3_WORD		word5
+	uint32_t word6;
+#define lpfc_fcf_record_fab_name_4_SHIFT	0
+#define lpfc_fcf_record_fab_name_4_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_4_WORD		word6
+#define lpfc_fcf_record_fab_name_5_SHIFT	8
+#define lpfc_fcf_record_fab_name_5_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_5_WORD		word6
+#define lpfc_fcf_record_fab_name_6_SHIFT	16
+#define lpfc_fcf_record_fab_name_6_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_6_WORD		word6
+#define lpfc_fcf_record_fab_name_7_SHIFT	24
+#define lpfc_fcf_record_fab_name_7_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_7_WORD		word6
+	uint32_t word7;
+#define lpfc_fcf_record_fc_map_0_SHIFT		0
+#define lpfc_fcf_record_fc_map_0_MASK		0x000000FF
+#define lpfc_fcf_record_fc_map_0_WORD		word7
+#define lpfc_fcf_record_fc_map_1_SHIFT		8
+#define lpfc_fcf_record_fc_map_1_MASK		0x000000FF
+#define lpfc_fcf_record_fc_map_1_WORD		word7
+#define lpfc_fcf_record_fc_map_2_SHIFT		16
+#define lpfc_fcf_record_fc_map_2_MASK		0x000000FF
+#define lpfc_fcf_record_fc_map_2_WORD		word7
+#define lpfc_fcf_record_fcf_valid_SHIFT		24
+#define lpfc_fcf_record_fcf_valid_MASK		0x000000FF
+#define lpfc_fcf_record_fcf_valid_WORD		word7
+	uint32_t word8;
+#define lpfc_fcf_record_fcf_index_SHIFT		0
+#define lpfc_fcf_record_fcf_index_MASK		0x0000FFFF
+#define lpfc_fcf_record_fcf_index_WORD		word8
+#define lpfc_fcf_record_fcf_state_SHIFT		16
+#define lpfc_fcf_record_fcf_state_MASK		0x0000FFFF
+#define lpfc_fcf_record_fcf_state_WORD		word8
+	uint8_t vlan_bitmap[512];
+};
+
+struct lpfc_mbx_read_fcf_tbl {
+	union lpfc_sli4_cfg_shdr cfg_shdr;
+	union {
+		struct {
+			uint32_t word10;
+#define lpfc_mbx_read_fcf_tbl_indx_SHIFT	0
+#define lpfc_mbx_read_fcf_tbl_indx_MASK		0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_indx_WORD		word10
+		} request;
+		struct {
+			uint32_t eventag;
+		} response;
+	} u;
+	uint32_t word11;
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_SHIFT	0
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_MASK	0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_WORD	word11
+};
+
+struct lpfc_mbx_add_fcf_tbl_entry {
+	union lpfc_sli4_cfg_shdr cfg_shdr;
+	uint32_t word10;
+#define lpfc_mbx_add_fcf_tbl_fcfi_SHIFT        0
+#define lpfc_mbx_add_fcf_tbl_fcfi_MASK         0x0000FFFF
+#define lpfc_mbx_add_fcf_tbl_fcfi_WORD         word10
+	struct lpfc_mbx_sge fcf_sge;
+};
+
+struct lpfc_mbx_del_fcf_tbl_entry {
+	struct mbox_header header;
+	uint32_t word10;
+#define lpfc_mbx_del_fcf_tbl_count_SHIFT	0
+#define lpfc_mbx_del_fcf_tbl_count_MASK		0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_count_WORD		word10
+#define lpfc_mbx_del_fcf_tbl_index_SHIFT	16
+#define lpfc_mbx_del_fcf_tbl_index_MASK		0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_index_WORD		word10
+};
+
+/* Status field for embedded SLI_CONFIG mailbox command */
+#define STATUS_SUCCESS					0x0
+#define STATUS_FAILED 					0x1
+#define STATUS_ILLEGAL_REQUEST				0x2
+#define STATUS_ILLEGAL_FIELD				0x3
+#define STATUS_INSUFFICIENT_BUFFER 			0x4
+#define STATUS_UNAUTHORIZED_REQUEST			0x5
+#define STATUS_FLASHROM_SAVE_FAILED			0x17
+#define STATUS_FLASHROM_RESTORE_FAILED			0x18
+#define STATUS_ICCBINDEX_ALLOC_FAILED			0x1a
+#define STATUS_IOCTLHANDLE_ALLOC_FAILED 		0x1b
+#define STATUS_INVALID_PHY_ADDR_FROM_OSM		0x1c
+#define STATUS_INVALID_PHY_ADDR_LEN_FROM_OSM		0x1d
+#define STATUS_ASSERT_FAILED				0x1e
+#define STATUS_INVALID_SESSION				0x1f
+#define STATUS_INVALID_CONNECTION			0x20
+#define STATUS_BTL_PATH_EXCEEDS_OSM_LIMIT		0x21
+#define STATUS_BTL_NO_FREE_SLOT_PATH			0x24
+#define STATUS_BTL_NO_FREE_SLOT_TGTID			0x25
+#define STATUS_OSM_DEVSLOT_NOT_FOUND			0x26
+#define STATUS_FLASHROM_READ_FAILED			0x27
+#define STATUS_POLL_IOCTL_TIMEOUT			0x28
+#define STATUS_ERROR_ACITMAIN				0x2a
+#define STATUS_REBOOT_REQUIRED				0x2c
+#define STATUS_FCF_IN_USE				0x3a
+
+struct lpfc_mbx_sli4_config {
+	struct mbox_header header;
+};
+
+struct lpfc_mbx_init_vfi {
+	uint32_t word1;
+#define lpfc_init_vfi_vr_SHIFT		31
+#define lpfc_init_vfi_vr_MASK		0x00000001
+#define lpfc_init_vfi_vr_WORD		word1
+#define lpfc_init_vfi_vt_SHIFT		30
+#define lpfc_init_vfi_vt_MASK		0x00000001
+#define lpfc_init_vfi_vt_WORD		word1
+#define lpfc_init_vfi_vf_SHIFT		29
+#define lpfc_init_vfi_vf_MASK		0x00000001
+#define lpfc_init_vfi_vf_WORD		word1
+#define lpfc_init_vfi_vfi_SHIFT		0
+#define lpfc_init_vfi_vfi_MASK		0x0000FFFF
+#define lpfc_init_vfi_vfi_WORD		word1
+	uint32_t word2;
+#define lpfc_init_vfi_fcfi_SHIFT	0
+#define lpfc_init_vfi_fcfi_MASK		0x0000FFFF
+#define lpfc_init_vfi_fcfi_WORD		word2
+	uint32_t word3;
+#define lpfc_init_vfi_pri_SHIFT		13
+#define lpfc_init_vfi_pri_MASK		0x00000007
+#define lpfc_init_vfi_pri_WORD		word3
+#define lpfc_init_vfi_vf_id_SHIFT	1
+#define lpfc_init_vfi_vf_id_MASK	0x00000FFF
+#define lpfc_init_vfi_vf_id_WORD	word3
+	uint32_t word4;
+#define lpfc_init_vfi_hop_count_SHIFT	24
+#define lpfc_init_vfi_hop_count_MASK	0x000000FF
+#define lpfc_init_vfi_hop_count_WORD	word4
+};
+
+struct lpfc_mbx_reg_vfi {
+	uint32_t word1;
+#define lpfc_reg_vfi_vp_SHIFT		28
+#define lpfc_reg_vfi_vp_MASK		0x00000001
+#define lpfc_reg_vfi_vp_WORD		word1
+#define lpfc_reg_vfi_vfi_SHIFT		0
+#define lpfc_reg_vfi_vfi_MASK		0x0000FFFF
+#define lpfc_reg_vfi_vfi_WORD		word1
+	uint32_t word2;
+#define lpfc_reg_vfi_vpi_SHIFT		16
+#define lpfc_reg_vfi_vpi_MASK		0x0000FFFF
+#define lpfc_reg_vfi_vpi_WORD		word2
+#define lpfc_reg_vfi_fcfi_SHIFT		0
+#define lpfc_reg_vfi_fcfi_MASK		0x0000FFFF
+#define lpfc_reg_vfi_fcfi_WORD		word2
+	uint32_t word3_rsvd;
+	uint32_t word4_rsvd;
+	struct ulp_bde64 bde;
+	uint32_t word8_rsvd;
+	uint32_t word9_rsvd;
+	uint32_t word10;
+#define lpfc_reg_vfi_nport_id_SHIFT		0
+#define lpfc_reg_vfi_nport_id_MASK		0x00FFFFFF
+#define lpfc_reg_vfi_nport_id_WORD		word10
+};
+
+struct lpfc_mbx_init_vpi {
+	uint32_t word1;
+#define lpfc_init_vpi_vfi_SHIFT		16
+#define lpfc_init_vpi_vfi_MASK		0x0000FFFF
+#define lpfc_init_vpi_vfi_WORD		word1
+#define lpfc_init_vpi_vpi_SHIFT		0
+#define lpfc_init_vpi_vpi_MASK		0x0000FFFF
+#define lpfc_init_vpi_vpi_WORD		word1
+};
+
+struct lpfc_mbx_read_vpi {
+	uint32_t word1_rsvd;
+	uint32_t word2;
+#define lpfc_mbx_read_vpi_vnportid_SHIFT	0
+#define lpfc_mbx_read_vpi_vnportid_MASK		0x00FFFFFF
+#define lpfc_mbx_read_vpi_vnportid_WORD		word2
+	uint32_t word3_rsvd;
+	uint32_t word4;
+#define lpfc_mbx_read_vpi_acq_alpa_SHIFT	0
+#define lpfc_mbx_read_vpi_acq_alpa_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_acq_alpa_WORD		word4
+#define lpfc_mbx_read_vpi_pb_SHIFT		15
+#define lpfc_mbx_read_vpi_pb_MASK		0x00000001
+#define lpfc_mbx_read_vpi_pb_WORD		word4
+#define lpfc_mbx_read_vpi_spec_alpa_SHIFT	16
+#define lpfc_mbx_read_vpi_spec_alpa_MASK	0x000000FF
+#define lpfc_mbx_read_vpi_spec_alpa_WORD	word4
+#define lpfc_mbx_read_vpi_ns_SHIFT		30
+#define lpfc_mbx_read_vpi_ns_MASK		0x00000001
+#define lpfc_mbx_read_vpi_ns_WORD		word4
+#define lpfc_mbx_read_vpi_hl_SHIFT		31
+#define lpfc_mbx_read_vpi_hl_MASK		0x00000001
+#define lpfc_mbx_read_vpi_hl_WORD		word4
+	uint32_t word5_rsvd;
+	uint32_t word6;
+#define lpfc_mbx_read_vpi_vpi_SHIFT		0
+#define lpfc_mbx_read_vpi_vpi_MASK		0x0000FFFF
+#define lpfc_mbx_read_vpi_vpi_WORD		word6
+	uint32_t word7;
+#define lpfc_mbx_read_vpi_mac_0_SHIFT		0
+#define lpfc_mbx_read_vpi_mac_0_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_0_WORD		word7
+#define lpfc_mbx_read_vpi_mac_1_SHIFT		8
+#define lpfc_mbx_read_vpi_mac_1_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_1_WORD		word7
+#define lpfc_mbx_read_vpi_mac_2_SHIFT		16
+#define lpfc_mbx_read_vpi_mac_2_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_2_WORD		word7
+#define lpfc_mbx_read_vpi_mac_3_SHIFT		24
+#define lpfc_mbx_read_vpi_mac_3_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_3_WORD		word7
+	uint32_t word8;
+#define lpfc_mbx_read_vpi_mac_4_SHIFT		0
+#define lpfc_mbx_read_vpi_mac_4_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_4_WORD		word8
+#define lpfc_mbx_read_vpi_mac_5_SHIFT		8
+#define lpfc_mbx_read_vpi_mac_5_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_5_WORD		word8
+#define lpfc_mbx_read_vpi_vlan_tag_SHIFT	16
+#define lpfc_mbx_read_vpi_vlan_tag_MASK		0x00000FFF
+#define lpfc_mbx_read_vpi_vlan_tag_WORD		word8
+#define lpfc_mbx_read_vpi_vv_SHIFT		28
+#define lpfc_mbx_read_vpi_vv_MASK		0x0000001
+#define lpfc_mbx_read_vpi_vv_WORD		word8
+};
+
+struct lpfc_mbx_unreg_vfi {
+	uint32_t word1_rsvd;
+	uint32_t word2;
+#define lpfc_unreg_vfi_vfi_SHIFT	0
+#define lpfc_unreg_vfi_vfi_MASK		0x0000FFFF
+#define lpfc_unreg_vfi_vfi_WORD		word2
+};
+
+struct lpfc_mbx_resume_rpi {
+	uint32_t word1;
+#define lpfc_resume_rpi_rpi_SHIFT	0
+#define lpfc_resume_rpi_rpi_MASK	0x0000FFFF
+#define lpfc_resume_rpi_rpi_WORD	word1
+	uint32_t event_tag;
+	uint32_t word3_rsvd;
+	uint32_t word4_rsvd;
+	uint32_t word5_rsvd;
+	uint32_t word6;
+#define lpfc_resume_rpi_vpi_SHIFT	0
+#define lpfc_resume_rpi_vpi_MASK	0x0000FFFF
+#define lpfc_resume_rpi_vpi_WORD	word6
+#define lpfc_resume_rpi_vfi_SHIFT	16
+#define lpfc_resume_rpi_vfi_MASK	0x0000FFFF
+#define lpfc_resume_rpi_vfi_WORD	word6
+};
+
+#define REG_FCF_INVALID_QID	0xFFFF
+struct lpfc_mbx_reg_fcfi {
+	uint32_t word1;
+#define lpfc_reg_fcfi_info_index_SHIFT	0
+#define lpfc_reg_fcfi_info_index_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_info_index_WORD	word1
+#define lpfc_reg_fcfi_fcfi_SHIFT	16
+#define lpfc_reg_fcfi_fcfi_MASK		0x0000FFFF
+#define lpfc_reg_fcfi_fcfi_WORD		word1
+	uint32_t word2;
+#define lpfc_reg_fcfi_rq_id1_SHIFT	0
+#define lpfc_reg_fcfi_rq_id1_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id1_WORD	word2
+#define lpfc_reg_fcfi_rq_id0_SHIFT	16
+#define lpfc_reg_fcfi_rq_id0_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id0_WORD	word2
+	uint32_t word3;
+#define lpfc_reg_fcfi_rq_id3_SHIFT	0
+#define lpfc_reg_fcfi_rq_id3_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id3_WORD	word3
+#define lpfc_reg_fcfi_rq_id2_SHIFT	16
+#define lpfc_reg_fcfi_rq_id2_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id2_WORD	word3
+	uint32_t word4;
+#define lpfc_reg_fcfi_type_match0_SHIFT	24
+#define lpfc_reg_fcfi_type_match0_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match0_WORD	word4
+#define lpfc_reg_fcfi_type_mask0_SHIFT	16
+#define lpfc_reg_fcfi_type_mask0_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask0_WORD	word4
+#define lpfc_reg_fcfi_rctl_match0_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match0_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match0_WORD	word4
+#define lpfc_reg_fcfi_rctl_mask0_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask0_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask0_WORD	word4
+	uint32_t word5;
+#define lpfc_reg_fcfi_type_match1_SHIFT	24
+#define lpfc_reg_fcfi_type_match1_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match1_WORD	word5
+#define lpfc_reg_fcfi_type_mask1_SHIFT	16
+#define lpfc_reg_fcfi_type_mask1_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask1_WORD	word5
+#define lpfc_reg_fcfi_rctl_match1_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match1_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match1_WORD	word5
+#define lpfc_reg_fcfi_rctl_mask1_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask1_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask1_WORD	word5
+	uint32_t word6;
+#define lpfc_reg_fcfi_type_match2_SHIFT	24
+#define lpfc_reg_fcfi_type_match2_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match2_WORD	word6
+#define lpfc_reg_fcfi_type_mask2_SHIFT	16
+#define lpfc_reg_fcfi_type_mask2_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask2_WORD	word6
+#define lpfc_reg_fcfi_rctl_match2_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match2_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match2_WORD	word6
+#define lpfc_reg_fcfi_rctl_mask2_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask2_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask2_WORD	word6
+	uint32_t word7;
+#define lpfc_reg_fcfi_type_match3_SHIFT	24
+#define lpfc_reg_fcfi_type_match3_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match3_WORD	word7
+#define lpfc_reg_fcfi_type_mask3_SHIFT	16
+#define lpfc_reg_fcfi_type_mask3_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask3_WORD	word7
+#define lpfc_reg_fcfi_rctl_match3_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match3_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match3_WORD	word7
+#define lpfc_reg_fcfi_rctl_mask3_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask3_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask3_WORD	word7
+	uint32_t word8;
+#define lpfc_reg_fcfi_mam_SHIFT		13
+#define lpfc_reg_fcfi_mam_MASK		0x00000003
+#define lpfc_reg_fcfi_mam_WORD		word8
+#define LPFC_MAM_BOTH		0	/* Both SPMA and FPMA */
+#define LPFC_MAM_SPMA		1	/* Server Provided MAC Address */
+#define LPFC_MAM_FPMA		2	/* Fabric Provided MAC Address */
+#define lpfc_reg_fcfi_vv_SHIFT		12
+#define lpfc_reg_fcfi_vv_MASK		0x00000001
+#define lpfc_reg_fcfi_vv_WORD		word8
+#define lpfc_reg_fcfi_vlan_tag_SHIFT	0
+#define lpfc_reg_fcfi_vlan_tag_MASK	0x00000FFF
+#define lpfc_reg_fcfi_vlan_tag_WORD	word8
+};
+
+struct lpfc_mbx_unreg_fcfi {
+	uint32_t word1_rsv;
+	uint32_t word2;
+#define lpfc_unreg_fcfi_SHIFT		0
+#define lpfc_unreg_fcfi_MASK		0x0000FFFF
+#define lpfc_unreg_fcfi_WORD		word2
+};
+
+struct lpfc_mbx_read_rev {
+	uint32_t word1;
+#define lpfc_mbx_rd_rev_sli_lvl_SHIFT  		16
+#define lpfc_mbx_rd_rev_sli_lvl_MASK   		0x0000000F
+#define lpfc_mbx_rd_rev_sli_lvl_WORD   		word1
+#define lpfc_mbx_rd_rev_fcoe_SHIFT		20
+#define lpfc_mbx_rd_rev_fcoe_MASK		0x00000001
+#define lpfc_mbx_rd_rev_fcoe_WORD		word1
+#define lpfc_mbx_rd_rev_vpd_SHIFT		29
+#define lpfc_mbx_rd_rev_vpd_MASK		0x00000001
+#define lpfc_mbx_rd_rev_vpd_WORD		word1
+	uint32_t first_hw_rev;
+	uint32_t second_hw_rev;
+	uint32_t word4_rsvd;
+	uint32_t third_hw_rev;
+	uint32_t word6;
+#define lpfc_mbx_rd_rev_fcph_low_SHIFT		0
+#define lpfc_mbx_rd_rev_fcph_low_MASK		0x000000FF
+#define lpfc_mbx_rd_rev_fcph_low_WORD		word6
+#define lpfc_mbx_rd_rev_fcph_high_SHIFT		8
+#define lpfc_mbx_rd_rev_fcph_high_MASK		0x000000FF
+#define lpfc_mbx_rd_rev_fcph_high_WORD		word6
+#define lpfc_mbx_rd_rev_ftr_lvl_low_SHIFT	16
+#define lpfc_mbx_rd_rev_ftr_lvl_low_MASK	0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_low_WORD	word6
+#define lpfc_mbx_rd_rev_ftr_lvl_high_SHIFT	24
+#define lpfc_mbx_rd_rev_ftr_lvl_high_MASK	0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_high_WORD	word6
+	uint32_t word7_rsvd;
+	uint32_t fw_id_rev;
+	uint8_t  fw_name[16];
+	uint32_t ulp_fw_id_rev;
+	uint8_t  ulp_fw_name[16];
+	uint32_t word18_47_rsvd[30];
+	uint32_t word48;
+#define lpfc_mbx_rd_rev_avail_len_SHIFT		0
+#define lpfc_mbx_rd_rev_avail_len_MASK		0x00FFFFFF
+#define lpfc_mbx_rd_rev_avail_len_WORD		word48
+	uint32_t vpd_paddr_low;
+	uint32_t vpd_paddr_high;
+	uint32_t avail_vpd_len;
+	uint32_t rsvd_52_63[12];
+};
+
+struct lpfc_mbx_read_config {
+	uint32_t word1;
+#define lpfc_mbx_rd_conf_max_bbc_SHIFT		0
+#define lpfc_mbx_rd_conf_max_bbc_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_max_bbc_WORD		word1
+#define lpfc_mbx_rd_conf_init_bbc_SHIFT		8
+#define lpfc_mbx_rd_conf_init_bbc_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_init_bbc_WORD		word1
+	uint32_t word2;
+#define lpfc_mbx_rd_conf_nport_did_SHIFT	0
+#define lpfc_mbx_rd_conf_nport_did_MASK		0x00FFFFFF
+#define lpfc_mbx_rd_conf_nport_did_WORD		word2
+#define lpfc_mbx_rd_conf_topology_SHIFT		24
+#define lpfc_mbx_rd_conf_topology_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_topology_WORD		word2
+	uint32_t word3;
+#define lpfc_mbx_rd_conf_ao_SHIFT		0
+#define lpfc_mbx_rd_conf_ao_MASK		0x00000001
+#define lpfc_mbx_rd_conf_ao_WORD		word3
+#define lpfc_mbx_rd_conf_bb_scn_SHIFT		8
+#define lpfc_mbx_rd_conf_bb_scn_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_bb_scn_WORD		word3
+#define lpfc_mbx_rd_conf_cbb_scn_SHIFT		12
+#define lpfc_mbx_rd_conf_cbb_scn_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_cbb_scn_WORD		word3
+#define lpfc_mbx_rd_conf_mc_SHIFT		29
+#define lpfc_mbx_rd_conf_mc_MASK		0x00000001
+#define lpfc_mbx_rd_conf_mc_WORD		word3
+	uint32_t word4;
+#define lpfc_mbx_rd_conf_e_d_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_e_d_tov_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_e_d_tov_WORD		word4
+	uint32_t word5;
+#define lpfc_mbx_rd_conf_lp_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_lp_tov_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_lp_tov_WORD		word5
+	uint32_t word6;
+#define lpfc_mbx_rd_conf_r_a_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_r_a_tov_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_r_a_tov_WORD		word6
+	uint32_t word7;
+#define lpfc_mbx_rd_conf_r_t_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_r_t_tov_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_r_t_tov_WORD		word7
+	uint32_t word8;
+#define lpfc_mbx_rd_conf_al_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_al_tov_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_al_tov_WORD		word8
+	uint32_t word9;
+#define lpfc_mbx_rd_conf_lmt_SHIFT		0
+#define lpfc_mbx_rd_conf_lmt_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_lmt_WORD		word9
+	uint32_t word10;
+#define lpfc_mbx_rd_conf_max_alpa_SHIFT		0
+#define lpfc_mbx_rd_conf_max_alpa_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_max_alpa_WORD		word10
+	uint32_t word11_rsvd;
+	uint32_t word12;
+#define lpfc_mbx_rd_conf_xri_base_SHIFT		0
+#define lpfc_mbx_rd_conf_xri_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_base_WORD		word12
+#define lpfc_mbx_rd_conf_xri_count_SHIFT	16
+#define lpfc_mbx_rd_conf_xri_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_count_WORD		word12
+	uint32_t word13;
+#define lpfc_mbx_rd_conf_rpi_base_SHIFT		0
+#define lpfc_mbx_rd_conf_rpi_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_base_WORD		word13
+#define lpfc_mbx_rd_conf_rpi_count_SHIFT	16
+#define lpfc_mbx_rd_conf_rpi_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_count_WORD		word13
+	uint32_t word14;
+#define lpfc_mbx_rd_conf_vpi_base_SHIFT		0
+#define lpfc_mbx_rd_conf_vpi_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_base_WORD		word14
+#define lpfc_mbx_rd_conf_vpi_count_SHIFT	16
+#define lpfc_mbx_rd_conf_vpi_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_count_WORD		word14
+	uint32_t word15;
+#define lpfc_mbx_rd_conf_vfi_base_SHIFT         0
+#define lpfc_mbx_rd_conf_vfi_base_MASK          0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_base_WORD          word15
+#define lpfc_mbx_rd_conf_vfi_count_SHIFT        16
+#define lpfc_mbx_rd_conf_vfi_count_MASK         0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_count_WORD         word15
+	uint32_t word16;
+#define lpfc_mbx_rd_conf_fcfi_base_SHIFT	0
+#define lpfc_mbx_rd_conf_fcfi_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_base_WORD		word16
+#define lpfc_mbx_rd_conf_fcfi_count_SHIFT	16
+#define lpfc_mbx_rd_conf_fcfi_count_MASK	0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_count_WORD	word16
+	uint32_t word17;
+#define lpfc_mbx_rd_conf_rq_count_SHIFT		0
+#define lpfc_mbx_rd_conf_rq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_rq_count_WORD		word17
+#define lpfc_mbx_rd_conf_eq_count_SHIFT		16
+#define lpfc_mbx_rd_conf_eq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_eq_count_WORD		word17
+	uint32_t word18;
+#define lpfc_mbx_rd_conf_wq_count_SHIFT		0
+#define lpfc_mbx_rd_conf_wq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_wq_count_WORD		word18
+#define lpfc_mbx_rd_conf_cq_count_SHIFT		16
+#define lpfc_mbx_rd_conf_cq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_cq_count_WORD		word18
+};
+
+struct lpfc_mbx_request_features {
+	uint32_t word1;
+#define lpfc_mbx_rq_ftr_qry_SHIFT		0
+#define lpfc_mbx_rq_ftr_qry_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_qry_WORD		word1
+	uint32_t word2;
+#define lpfc_mbx_rq_ftr_rq_iaab_SHIFT		0
+#define lpfc_mbx_rq_ftr_rq_iaab_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_iaab_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_npiv_SHIFT		1
+#define lpfc_mbx_rq_ftr_rq_npiv_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_npiv_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_dif_SHIFT		2
+#define lpfc_mbx_rq_ftr_rq_dif_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_dif_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_vf_SHIFT		3
+#define lpfc_mbx_rq_ftr_rq_vf_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_vf_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_fcpi_SHIFT		4
+#define lpfc_mbx_rq_ftr_rq_fcpi_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpi_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_fcpt_SHIFT		5
+#define lpfc_mbx_rq_ftr_rq_fcpt_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpt_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_fcpc_SHIFT		6
+#define lpfc_mbx_rq_ftr_rq_fcpc_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpc_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_ifip_SHIFT		7
+#define lpfc_mbx_rq_ftr_rq_ifip_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_ifip_WORD		word2
+	uint32_t word3;
+#define lpfc_mbx_rq_ftr_rsp_iaab_SHIFT		0
+#define lpfc_mbx_rq_ftr_rsp_iaab_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_iaab_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_npiv_SHIFT		1
+#define lpfc_mbx_rq_ftr_rsp_npiv_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_npiv_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_dif_SHIFT		2
+#define lpfc_mbx_rq_ftr_rsp_dif_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_dif_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_vf_SHIFT		3
+#define lpfc_mbx_rq_ftr_rsp_vf__MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_vf_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_fcpi_SHIFT		4
+#define lpfc_mbx_rq_ftr_rsp_fcpi_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpi_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_fcpt_SHIFT		5
+#define lpfc_mbx_rq_ftr_rsp_fcpt_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpt_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_fcpc_SHIFT		6
+#define lpfc_mbx_rq_ftr_rsp_fcpc_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpc_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_ifip_SHIFT		7
+#define lpfc_mbx_rq_ftr_rsp_ifip_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_ifip_WORD		word3
+};
+
+/* Mailbox Completion Queue Error Messages */
+#define MB_CQE_STATUS_SUCCESS 			0x0
+#define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES	0x1
+#define MB_CQE_STATUS_INVALID_PARAMETER		0x2
+#define MB_CQE_STATUS_INSUFFICIENT_RESOURCES	0x3
+#define MB_CEQ_STATUS_QUEUE_FLUSHING		0x4
+#define MB_CQE_STATUS_DMA_FAILED		0x5
+
+/* mailbox queue entry structure */
+struct lpfc_mqe {
+	uint32_t word0;
+#define lpfc_mqe_status_SHIFT		16
+#define lpfc_mqe_status_MASK		0x0000FFFF
+#define lpfc_mqe_status_WORD		word0
+#define lpfc_mqe_command_SHIFT		8
+#define lpfc_mqe_command_MASK		0x000000FF
+#define lpfc_mqe_command_WORD		word0
+	union {
+		uint32_t mb_words[LPFC_SLI4_MB_WORD_COUNT - 1];
+		/* sli4 mailbox commands */
+		struct lpfc_mbx_sli4_config sli4_config;
+		struct lpfc_mbx_init_vfi init_vfi;
+		struct lpfc_mbx_reg_vfi reg_vfi;
+		struct lpfc_mbx_reg_vfi unreg_vfi;
+		struct lpfc_mbx_init_vpi init_vpi;
+		struct lpfc_mbx_resume_rpi resume_rpi;
+		struct lpfc_mbx_read_fcf_tbl read_fcf_tbl;
+		struct lpfc_mbx_add_fcf_tbl_entry add_fcf_entry;
+		struct lpfc_mbx_del_fcf_tbl_entry del_fcf_entry;
+		struct lpfc_mbx_reg_fcfi reg_fcfi;
+		struct lpfc_mbx_unreg_fcfi unreg_fcfi;
+		struct lpfc_mbx_mq_create mq_create;
+		struct lpfc_mbx_eq_create eq_create;
+		struct lpfc_mbx_cq_create cq_create;
+		struct lpfc_mbx_wq_create wq_create;
+		struct lpfc_mbx_rq_create rq_create;
+		struct lpfc_mbx_mq_destroy mq_destroy;
+		struct lpfc_mbx_eq_destroy eq_destroy;
+		struct lpfc_mbx_cq_destroy cq_destroy;
+		struct lpfc_mbx_wq_destroy wq_destroy;
+		struct lpfc_mbx_rq_destroy rq_destroy;
+		struct lpfc_mbx_post_sgl_pages post_sgl_pages;
+		struct lpfc_mbx_nembed_cmd nembed_cmd;
+		struct lpfc_mbx_read_rev read_rev;
+		struct lpfc_mbx_read_vpi read_vpi;
+		struct lpfc_mbx_read_config rd_config;
+		struct lpfc_mbx_request_features req_ftrs;
+		struct lpfc_mbx_post_hdr_tmpl hdr_tmpl;
+		struct lpfc_mbx_nop nop;
+	} un;
+};
+
+struct lpfc_mcqe {
+	uint32_t word0;
+#define lpfc_mcqe_status_SHIFT		0
+#define lpfc_mcqe_status_MASK		0x0000FFFF
+#define lpfc_mcqe_status_WORD		word0
+#define lpfc_mcqe_ext_status_SHIFT	16
+#define lpfc_mcqe_ext_status_MASK  	0x0000FFFF
+#define lpfc_mcqe_ext_status_WORD 	word0
+	uint32_t mcqe_tag0;
+	uint32_t mcqe_tag1;
+	uint32_t trailer;
+#define lpfc_trailer_valid_SHIFT	31
+#define lpfc_trailer_valid_MASK		0x00000001
+#define lpfc_trailer_valid_WORD		trailer
+#define lpfc_trailer_async_SHIFT	30
+#define lpfc_trailer_async_MASK		0x00000001
+#define lpfc_trailer_async_WORD		trailer
+#define lpfc_trailer_hpi_SHIFT		29
+#define lpfc_trailer_hpi_MASK		0x00000001
+#define lpfc_trailer_hpi_WORD		trailer
+#define lpfc_trailer_completed_SHIFT	28
+#define lpfc_trailer_completed_MASK	0x00000001
+#define lpfc_trailer_completed_WORD	trailer
+#define lpfc_trailer_consumed_SHIFT	27
+#define lpfc_trailer_consumed_MASK	0x00000001
+#define lpfc_trailer_consumed_WORD	trailer
+#define lpfc_trailer_type_SHIFT		16
+#define lpfc_trailer_type_MASK		0x000000FF
+#define lpfc_trailer_type_WORD		trailer
+#define lpfc_trailer_code_SHIFT		8
+#define lpfc_trailer_code_MASK		0x000000FF
+#define lpfc_trailer_code_WORD		trailer
+#define LPFC_TRAILER_CODE_LINK	0x1
+#define LPFC_TRAILER_CODE_FCOE	0x2
+#define LPFC_TRAILER_CODE_DCBX	0x3
+};
+
+struct lpfc_acqe_link {
+	uint32_t word0;
+#define lpfc_acqe_link_speed_SHIFT		24
+#define lpfc_acqe_link_speed_MASK		0x000000FF
+#define lpfc_acqe_link_speed_WORD		word0
+#define LPFC_ASYNC_LINK_SPEED_ZERO		0x0
+#define LPFC_ASYNC_LINK_SPEED_10MBPS		0x1
+#define LPFC_ASYNC_LINK_SPEED_100MBPS		0x2
+#define LPFC_ASYNC_LINK_SPEED_1GBPS		0x3
+#define LPFC_ASYNC_LINK_SPEED_10GBPS		0x4
+#define lpfc_acqe_link_duplex_SHIFT		16
+#define lpfc_acqe_link_duplex_MASK		0x000000FF
+#define lpfc_acqe_link_duplex_WORD		word0
+#define LPFC_ASYNC_LINK_DUPLEX_NONE		0x0
+#define LPFC_ASYNC_LINK_DUPLEX_HALF		0x1
+#define LPFC_ASYNC_LINK_DUPLEX_FULL		0x2
+#define lpfc_acqe_link_status_SHIFT		8
+#define lpfc_acqe_link_status_MASK		0x000000FF
+#define lpfc_acqe_link_status_WORD		word0
+#define LPFC_ASYNC_LINK_STATUS_DOWN		0x0
+#define LPFC_ASYNC_LINK_STATUS_UP		0x1
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN	0x2
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_UP	0x3
+#define lpfc_acqe_link_physical_SHIFT		0
+#define lpfc_acqe_link_physical_MASK		0x000000FF
+#define lpfc_acqe_link_physical_WORD		word0
+#define LPFC_ASYNC_LINK_PORT_A			0x0
+#define LPFC_ASYNC_LINK_PORT_B			0x1
+	uint32_t word1;
+#define lpfc_acqe_link_fault_SHIFT	0
+#define lpfc_acqe_link_fault_MASK	0x000000FF
+#define lpfc_acqe_link_fault_WORD	word1
+#define LPFC_ASYNC_LINK_FAULT_NONE	0x0
+#define LPFC_ASYNC_LINK_FAULT_LOCAL	0x1
+#define LPFC_ASYNC_LINK_FAULT_REMOTE	0x2
+	uint32_t event_tag;
+	uint32_t trailer;
+};
+
+struct lpfc_acqe_fcoe {
+	uint32_t fcf_index;
+	uint32_t word1;
+#define lpfc_acqe_fcoe_fcf_count_SHIFT		0
+#define lpfc_acqe_fcoe_fcf_count_MASK		0x0000FFFF
+#define lpfc_acqe_fcoe_fcf_count_WORD		word1
+#define lpfc_acqe_fcoe_event_type_SHIFT		16
+#define lpfc_acqe_fcoe_event_type_MASK		0x0000FFFF
+#define lpfc_acqe_fcoe_event_type_WORD		word1
+#define LPFC_FCOE_EVENT_TYPE_NEW_FCF		0x1
+#define LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL	0x2
+#define LPFC_FCOE_EVENT_TYPE_FCF_DEAD		0x3
+	uint32_t event_tag;
+	uint32_t trailer;
+};
+
+struct lpfc_acqe_dcbx {
+	uint32_t tlv_ttl;
+	uint32_t reserved;
+	uint32_t event_tag;
+	uint32_t trailer;
+};
+
+/*
+ * Define the bootstrap mailbox (bmbx) region used to communicate
+ * mailbox command between the host and port. The mailbox consists
+ * of a payload area of 256 bytes and a completion queue of length
+ * 16 bytes.
+ */
+struct lpfc_bmbx_create {
+	struct lpfc_mqe mqe;
+	struct lpfc_mcqe mcqe;
+};
+
+#define SGL_ALIGN_SZ 64
+#define SGL_PAGE_SIZE 4096
+/* align SGL addr on a size boundary - adjust address up */
+#define NO_XRI ((uint16_t)-1)
+struct wqe_common {
+	uint32_t word6;
+#define wqe_xri_SHIFT         0
+#define wqe_xri_MASK          0x0000FFFF
+#define wqe_xri_WORD          word6
+#define wqe_ctxt_tag_SHIFT    16
+#define wqe_ctxt_tag_MASK     0x0000FFFF
+#define wqe_ctxt_tag_WORD     word6
+	uint32_t word7;
+#define wqe_ct_SHIFT          2
+#define wqe_ct_MASK           0x00000003
+#define wqe_ct_WORD           word7
+#define wqe_status_SHIFT      4
+#define wqe_status_MASK       0x0000000f
+#define wqe_status_WORD       word7
+#define wqe_cmnd_SHIFT        8
+#define wqe_cmnd_MASK         0x000000ff
+#define wqe_cmnd_WORD         word7
+#define wqe_class_SHIFT       16
+#define wqe_class_MASK        0x00000007
+#define wqe_class_WORD        word7
+#define wqe_pu_SHIFT          20
+#define wqe_pu_MASK           0x00000003
+#define wqe_pu_WORD           word7
+#define wqe_erp_SHIFT         22
+#define wqe_erp_MASK          0x00000001
+#define wqe_erp_WORD          word7
+#define wqe_lnk_SHIFT         23
+#define wqe_lnk_MASK          0x00000001
+#define wqe_lnk_WORD          word7
+#define wqe_tmo_SHIFT         24
+#define wqe_tmo_MASK          0x000000ff
+#define wqe_tmo_WORD          word7
+	uint32_t abort_tag; /* word 8 in WQE */
+	uint32_t word9;
+#define wqe_reqtag_SHIFT      0
+#define wqe_reqtag_MASK       0x0000FFFF
+#define wqe_reqtag_WORD       word9
+#define wqe_rcvoxid_SHIFT     16
+#define wqe_rcvoxid_MASK       0x0000FFFF
+#define wqe_rcvoxid_WORD       word9
+	uint32_t word10;
+#define wqe_pri_SHIFT         16
+#define wqe_pri_MASK          0x00000007
+#define wqe_pri_WORD          word10
+#define wqe_pv_SHIFT          19
+#define wqe_pv_MASK           0x00000001
+#define wqe_pv_WORD           word10
+#define wqe_xc_SHIFT          21
+#define wqe_xc_MASK           0x00000001
+#define wqe_xc_WORD           word10
+#define wqe_ccpe_SHIFT        23
+#define wqe_ccpe_MASK         0x00000001
+#define wqe_ccpe_WORD         word10
+#define wqe_ccp_SHIFT         24
+#define wqe_ccp_MASK         0x000000ff
+#define wqe_ccp_WORD         word10
+	uint32_t word11;
+#define wqe_cmd_type_SHIFT  0
+#define wqe_cmd_type_MASK   0x0000000f
+#define wqe_cmd_type_WORD   word11
+#define wqe_wqec_SHIFT      7
+#define wqe_wqec_MASK       0x00000001
+#define wqe_wqec_WORD       word11
+#define wqe_cqid_SHIFT      16
+#define wqe_cqid_MASK       0x000003ff
+#define wqe_cqid_WORD       word11
+};
+
+struct wqe_did {
+	uint32_t word5;
+#define wqe_els_did_SHIFT         0
+#define wqe_els_did_MASK          0x00FFFFFF
+#define wqe_els_did_WORD          word5
+#define wqe_xmit_bls_ar_SHIFT         30
+#define wqe_xmit_bls_ar_MASK          0x00000001
+#define wqe_xmit_bls_ar_WORD          word5
+#define wqe_xmit_bls_xo_SHIFT         31
+#define wqe_xmit_bls_xo_MASK          0x00000001
+#define wqe_xmit_bls_xo_WORD          word5
+};
+
+struct els_request64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t payload_len;
+	uint32_t word4;
+#define els_req64_sid_SHIFT         0
+#define els_req64_sid_MASK          0x00FFFFFF
+#define els_req64_sid_WORD          word4
+#define els_req64_sp_SHIFT          24
+#define els_req64_sp_MASK           0x00000001
+#define els_req64_sp_WORD           word4
+#define els_req64_vf_SHIFT          25
+#define els_req64_vf_MASK           0x00000001
+#define els_req64_vf_WORD           word4
+	struct wqe_did	wqe_dest;
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t word12;
+#define els_req64_vfid_SHIFT        1
+#define els_req64_vfid_MASK         0x00000FFF
+#define els_req64_vfid_WORD         word12
+#define els_req64_pri_SHIFT         13
+#define els_req64_pri_MASK          0x00000007
+#define els_req64_pri_WORD          word12
+	uint32_t word13;
+#define els_req64_hopcnt_SHIFT      24
+#define els_req64_hopcnt_MASK       0x000000ff
+#define els_req64_hopcnt_WORD       word13
+	uint32_t reserved[2];
+};
+
+struct xmit_els_rsp64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t rsvd3;
+	uint32_t rsvd4;
+	struct wqe_did	wqe_dest;
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+
+struct xmit_bls_rsp64_wqe {
+	uint32_t payload0;
+	uint32_t word1;
+#define xmit_bls_rsp64_rxid_SHIFT  0
+#define xmit_bls_rsp64_rxid_MASK   0x0000ffff
+#define xmit_bls_rsp64_rxid_WORD   word1
+#define xmit_bls_rsp64_oxid_SHIFT  16
+#define xmit_bls_rsp64_oxid_MASK   0x0000ffff
+#define xmit_bls_rsp64_oxid_WORD   word1
+	uint32_t word2;
+#define xmit_bls_rsp64_seqcntlo_SHIFT  0
+#define xmit_bls_rsp64_seqcntlo_MASK   0x0000ffff
+#define xmit_bls_rsp64_seqcntlo_WORD   word2
+#define xmit_bls_rsp64_seqcnthi_SHIFT  16
+#define xmit_bls_rsp64_seqcnthi_MASK   0x0000ffff
+#define xmit_bls_rsp64_seqcnthi_WORD   word2
+	uint32_t rsrvd3;
+	uint32_t rsrvd4;
+	struct wqe_did	wqe_dest;
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+struct wqe_rctl_dfctl {
+	uint32_t word5;
+#define wqe_si_SHIFT 2
+#define wqe_si_MASK  0x000000001
+#define wqe_si_WORD  word5
+#define wqe_la_SHIFT 3
+#define wqe_la_MASK  0x000000001
+#define wqe_la_WORD  word5
+#define wqe_ls_SHIFT 7
+#define wqe_ls_MASK  0x000000001
+#define wqe_ls_WORD  word5
+#define wqe_dfctl_SHIFT 8
+#define wqe_dfctl_MASK  0x0000000ff
+#define wqe_dfctl_WORD  word5
+#define wqe_type_SHIFT 16
+#define wqe_type_MASK  0x0000000ff
+#define wqe_type_WORD  word5
+#define wqe_rctl_SHIFT 24
+#define wqe_rctl_MASK  0x0000000ff
+#define wqe_rctl_WORD  word5
+};
+
+struct xmit_seq64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t paylaod_offset;
+	uint32_t relative_offset;
+	struct wqe_rctl_dfctl wge_ctl;
+	struct wqe_common wqe_com; /* words 6-11 */
+	/* Note: word10 different REVISIT */
+	uint32_t xmit_len;
+	uint32_t rsvd_12_15[3];
+};
+struct xmit_bcast64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t paylaod_len;
+	uint32_t rsvd4;
+	struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+
+struct gen_req64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t command_len;
+	uint32_t payload_len;
+	struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+
+struct create_xri_wqe {
+	uint32_t rsrvd[5];           /* words 0-4 */
+	struct wqe_did	wqe_dest;  /* word 5 */
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+#define T_REQUEST_TAG 3
+#define T_XRI_TAG 1
+
+struct abort_cmd_wqe {
+	uint32_t rsrvd[3];
+	uint32_t word3;
+#define	abort_cmd_ia_SHIFT  0
+#define	abort_cmd_ia_MASK  0x000000001
+#define	abort_cmd_ia_WORD  word3
+#define	abort_cmd_criteria_SHIFT  8
+#define	abort_cmd_criteria_MASK  0x0000000ff
+#define	abort_cmd_criteria_WORD  word3
+	uint32_t rsrvd4;
+	uint32_t rsrvd5;
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+struct fcp_iwrite64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t payload_len;
+	uint32_t total_xfer_len;
+	uint32_t initial_xfer_len;
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+struct fcp_iread64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t payload_len;          /* word 3 */
+	uint32_t total_xfer_len;       /* word 4 */
+	uint32_t rsrvd5;               /* word 5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+struct fcp_icmnd64_wqe {
+	struct ulp_bde64 bde;	 /* words 0-2 */
+	uint32_t rsrvd[3];             /* words 3-5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+
+union lpfc_wqe {
+	uint32_t words[16];
+	struct lpfc_wqe_generic generic;
+	struct fcp_icmnd64_wqe fcp_icmd;
+	struct fcp_iread64_wqe fcp_iread;
+	struct fcp_iwrite64_wqe fcp_iwrite;
+	struct abort_cmd_wqe abort_cmd;
+	struct create_xri_wqe create_xri;
+	struct xmit_bcast64_wqe xmit_bcast64;
+	struct xmit_seq64_wqe xmit_sequence;
+	struct xmit_bls_rsp64_wqe xmit_bls_rsp;
+	struct xmit_els_rsp64_wqe xmit_els_rsp;
+	struct els_request64_wqe els_req;
+	struct gen_req64_wqe gen_req;
+};
+
+#define FCP_COMMAND 0x0
+#define FCP_COMMAND_DATA_OUT 0x1
+#define ELS_COMMAND_NON_FIP 0xC
+#define ELS_COMMAND_FIP 0xD
+#define OTHER_COMMAND 0x8
+
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 86d1bdc..2f5907f 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -34,8 +34,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -51,9 +53,23 @@
 unsigned long _dump_buf_dif_order;
 spinlock_t _dump_buf_lock;
 
-static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
 static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
 static int lpfc_post_rcv_buf(struct lpfc_hba *);
+static int lpfc_sli4_queue_create(struct lpfc_hba *);
+static void lpfc_sli4_queue_destroy(struct lpfc_hba *);
+static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
+static int lpfc_setup_endian_order(struct lpfc_hba *);
+static int lpfc_sli4_read_config(struct lpfc_hba *);
+static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
+static void lpfc_free_sgl_list(struct lpfc_hba *);
+static int lpfc_init_sgl_list(struct lpfc_hba *);
+static int lpfc_init_active_sgl_array(struct lpfc_hba *);
+static void lpfc_free_active_sgl(struct lpfc_hba *);
+static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
+static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
+static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);
 
 static struct scsi_transport_template *lpfc_transport_template = NULL;
 static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
@@ -92,7 +108,7 @@
 		return -ENOMEM;
 	}
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	phba->link_state = LPFC_INIT_MBX_CMDS;
 
 	if (lpfc_is_LC_HBA(phba->pcidev->device)) {
@@ -205,6 +221,11 @@
 					mb->mbxCommand, mb->mbxStatus);
 			mb->un.varDmp.word_cnt = 0;
 		}
+		/* dump mem may return a zero when finished or we got a
+		 * mailbox error, either way we are done.
+		 */
+		if (mb->un.varDmp.word_cnt == 0)
+			break;
 		if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset)
 			mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset;
 		lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
@@ -233,7 +254,7 @@
 static void
 lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
 {
-	if (pmboxq->mb.mbxStatus == MBX_SUCCESS)
+	if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS)
 		phba->temp_sensor_support = 1;
 	else
 		phba->temp_sensor_support = 0;
@@ -260,7 +281,7 @@
 	/* character array used for decoding dist type. */
 	char dist_char[] = "nabx";
 
-	if (pmboxq->mb.mbxStatus != MBX_SUCCESS) {
+	if (pmboxq->u.mb.mbxStatus != MBX_SUCCESS) {
 		mempool_free(pmboxq, phba->mbox_mem_pool);
 		return;
 	}
@@ -268,7 +289,7 @@
 	prg = (struct prog_id *) &prog_id_word;
 
 	/* word 7 contain option rom version */
-	prog_id_word = pmboxq->mb.un.varWords[7];
+	prog_id_word = pmboxq->u.mb.un.varWords[7];
 
 	/* Decode the Option rom version word to a readable string */
 	if (prg->dist < 4)
@@ -325,7 +346,7 @@
 		phba->link_state = LPFC_HBA_ERROR;
 		return -ENOMEM;
 	}
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 
 	/* Get login parameters for NID.  */
 	lpfc_read_sparam(phba, pmb, 0);
@@ -364,6 +385,7 @@
 	/* Update the fc_host data structures with new wwn. */
 	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
 	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+	fc_host_max_npiv_vports(shost) = phba->max_vpi;
 
 	/* If no serial number in VPD data, use low 6 bytes of WWNN */
 	/* This should be consolidated into parse_vpd ? - mr */
@@ -460,17 +482,18 @@
 			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
 					"0352 Config MSI mailbox command "
 					"failed, mbxCmd x%x, mbxStatus x%x\n",
-					pmb->mb.mbxCommand, pmb->mb.mbxStatus);
+					pmb->u.mb.mbxCommand,
+					pmb->u.mb.mbxStatus);
 			mempool_free(pmb, phba->mbox_mem_pool);
 			return -EIO;
 		}
 	}
 
+	spin_lock_irq(&phba->hbalock);
 	/* Initialize ERATT handling flag */
 	phba->hba_flag &= ~HBA_ERATT_HANDLED;
 
 	/* Enable appropriate host interrupts */
-	spin_lock_irq(&phba->hbalock);
 	status = readl(phba->HCregaddr);
 	status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
 	if (psli->num_rings > 0)
@@ -571,16 +594,20 @@
 {
 	struct lpfc_vport **vports;
 	int i;
-	/* Disable interrupts */
-	writel(0, phba->HCregaddr);
-	readl(phba->HCregaddr); /* flush */
+
+	if (phba->sli_rev <= LPFC_SLI_REV3) {
+		/* Disable interrupts */
+		writel(0, phba->HCregaddr);
+		readl(phba->HCregaddr); /* flush */
+	}
 
 	if (phba->pport->load_flag & FC_UNLOADING)
 		lpfc_cleanup_discovery_resources(phba->pport);
 	else {
 		vports = lpfc_create_vport_work_array(phba);
 		if (vports != NULL)
-			for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+			for (i = 0; i <= phba->max_vports &&
+				vports[i] != NULL; i++)
 				lpfc_cleanup_discovery_resources(vports[i]);
 		lpfc_destroy_vport_work_array(phba, vports);
 	}
@@ -588,7 +615,7 @@
 }
 
 /**
- * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset
+ * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
  * @phba: pointer to lpfc HBA data structure.
  *
  * This routine will do uninitialization after the HBA is reset when bring
@@ -598,8 +625,8 @@
  *   0 - sucess.
  *   Any other value - error.
  **/
-int
-lpfc_hba_down_post(struct lpfc_hba *phba)
+static int
+lpfc_hba_down_post_s3(struct lpfc_hba *phba)
 {
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring *pring;
@@ -642,6 +669,77 @@
 
 	return 0;
 }
+/**
+ * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will do uninitialization after the HBA is reset when bring
+ * down the SLI Layer.
+ *
+ * Return codes
+ *   0 - sucess.
+ *   Any other value - error.
+ **/
+static int
+lpfc_hba_down_post_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_scsi_buf *psb, *psb_next;
+	LIST_HEAD(aborts);
+	int ret;
+	unsigned long iflag = 0;
+	ret = lpfc_hba_down_post_s3(phba);
+	if (ret)
+		return ret;
+	/* At this point in time the HBA is either reset or DOA. Either
+	 * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
+	 * on the lpfc_sgl_list so that it can either be freed if the
+	 * driver is unloading or reposted if the driver is restarting
+	 * the port.
+	 */
+	spin_lock_irq(&phba->hbalock);  /* required for lpfc_sgl_list and */
+					/* scsl_buf_list */
+	/* abts_sgl_list_lock required because worker thread uses this
+	 * list.
+	 */
+	spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
+	list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
+			&phba->sli4_hba.lpfc_sgl_list);
+	spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
+	/* abts_scsi_buf_list_lock required because worker thread uses this
+	 * list.
+	 */
+	spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	list_splice_init(&phba->sli4_hba.lpfc_abts_scsi_buf_list,
+			&aborts);
+	spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	spin_unlock_irq(&phba->hbalock);
+
+	list_for_each_entry_safe(psb, psb_next, &aborts, list) {
+		psb->pCmd = NULL;
+		psb->status = IOSTAT_SUCCESS;
+	}
+	spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+	list_splice(&aborts, &phba->lpfc_scsi_buf_list);
+	spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+	return 0;
+}
+
+/**
+ * lpfc_hba_down_post - Wrapper func for hba down post routine
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 routine for performing
+ * uninitialization after the HBA is reset when bring down the SLI Layer.
+ *
+ * Return codes
+ *   0 - sucess.
+ *   Any other value - error.
+ **/
+int
+lpfc_hba_down_post(struct lpfc_hba *phba)
+{
+	return (*phba->lpfc_hba_down_post)(phba);
+}
 
 /**
  * lpfc_hb_timeout - The HBA-timer timeout handler
@@ -809,7 +907,7 @@
 					"taking this port offline.\n");
 
 			spin_lock_irq(&phba->hbalock);
-			psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+			psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 			spin_unlock_irq(&phba->hbalock);
 
 			lpfc_offline_prep(phba);
@@ -834,13 +932,15 @@
 	struct lpfc_sli   *psli = &phba->sli;
 
 	spin_lock_irq(&phba->hbalock);
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 	lpfc_offline_prep(phba);
 
 	lpfc_offline(phba);
 	lpfc_reset_barrier(phba);
+	spin_lock_irq(&phba->hbalock);
 	lpfc_sli_brdreset(phba);
+	spin_unlock_irq(&phba->hbalock);
 	lpfc_hba_down_post(phba);
 	lpfc_sli_brdready(phba, HS_MBRDY);
 	lpfc_unblock_mgmt_io(phba);
@@ -849,6 +949,25 @@
 }
 
 /**
+ * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to bring a SLI4 HBA offline when HBA hardware error
+ * other than Port Error 6 has been detected.
+ **/
+static void
+lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
+{
+	lpfc_offline_prep(phba);
+	lpfc_offline(phba);
+	lpfc_sli4_brdreset(phba);
+	lpfc_hba_down_post(phba);
+	lpfc_sli4_post_status_check(phba);
+	lpfc_unblock_mgmt_io(phba);
+	phba->link_state = LPFC_HBA_ERROR;
+}
+
+/**
  * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
  * @phba: pointer to lpfc hba data structure.
  *
@@ -864,6 +983,16 @@
 	struct lpfc_sli_ring  *pring;
 	struct lpfc_sli *psli = &phba->sli;
 
+	/* If the pci channel is offline, ignore possible errors,
+	 * since we cannot communicate with the pci card anyway.
+	 */
+	if (pci_channel_offline(phba->pcidev)) {
+		spin_lock_irq(&phba->hbalock);
+		phba->hba_flag &= ~DEFER_ERATT;
+		spin_unlock_irq(&phba->hbalock);
+		return;
+	}
+
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 		"0479 Deferred Adapter Hardware Error "
 		"Data: x%x x%x x%x\n",
@@ -871,7 +1000,7 @@
 		phba->work_status[0], phba->work_status[1]);
 
 	spin_lock_irq(&phba->hbalock);
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 
 
@@ -909,13 +1038,30 @@
 	if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
 		phba->work_hs = old_host_status & ~HS_FFER1;
 
+	spin_lock_irq(&phba->hbalock);
 	phba->hba_flag &= ~DEFER_ERATT;
+	spin_unlock_irq(&phba->hbalock);
 	phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
 	phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
 }
 
+static void
+lpfc_board_errevt_to_mgmt(struct lpfc_hba *phba)
+{
+	struct lpfc_board_event_header board_event;
+	struct Scsi_Host *shost;
+
+	board_event.event_type = FC_REG_BOARD_EVENT;
+	board_event.subcategory = LPFC_EVENT_PORTINTERR;
+	shost = lpfc_shost_from_vport(phba->pport);
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+				  sizeof(board_event),
+				  (char *) &board_event,
+				  LPFC_NL_VENDOR_ID);
+}
+
 /**
- * lpfc_handle_eratt - The HBA hardware error handler
+ * lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to handle the following HBA hardware error
@@ -924,8 +1070,8 @@
  * 2 - DMA ring index out of range
  * 3 - Mailbox command came back as unknown
  **/
-void
-lpfc_handle_eratt(struct lpfc_hba *phba)
+static void
+lpfc_handle_eratt_s3(struct lpfc_hba *phba)
 {
 	struct lpfc_vport *vport = phba->pport;
 	struct lpfc_sli   *psli = &phba->sli;
@@ -934,24 +1080,23 @@
 	unsigned long temperature;
 	struct temp_event temp_event_data;
 	struct Scsi_Host  *shost;
-	struct lpfc_board_event_header board_event;
 
 	/* If the pci channel is offline, ignore possible errors,
-	 * since we cannot communicate with the pci card anyway. */
-	if (pci_channel_offline(phba->pcidev))
+	 * since we cannot communicate with the pci card anyway.
+	 */
+	if (pci_channel_offline(phba->pcidev)) {
+		spin_lock_irq(&phba->hbalock);
+		phba->hba_flag &= ~DEFER_ERATT;
+		spin_unlock_irq(&phba->hbalock);
 		return;
+	}
+
 	/* If resets are disabled then leave the HBA alone and return */
 	if (!phba->cfg_enable_hba_reset)
 		return;
 
 	/* Send an internal error event to mgmt application */
-	board_event.event_type = FC_REG_BOARD_EVENT;
-	board_event.subcategory = LPFC_EVENT_PORTINTERR;
-	shost = lpfc_shost_from_vport(phba->pport);
-	fc_host_post_vendor_event(shost, fc_get_event_number(),
-				  sizeof(board_event),
-				  (char *) &board_event,
-				  LPFC_NL_VENDOR_ID);
+	lpfc_board_errevt_to_mgmt(phba);
 
 	if (phba->hba_flag & DEFER_ERATT)
 		lpfc_handle_deferred_eratt(phba);
@@ -965,7 +1110,7 @@
 				phba->work_status[0], phba->work_status[1]);
 
 		spin_lock_irq(&phba->hbalock);
-		psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+		psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 		spin_unlock_irq(&phba->hbalock);
 
 		/*
@@ -1037,6 +1182,65 @@
 }
 
 /**
+ * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the SLI4 HBA hardware error attention
+ * conditions.
+ **/
+static void
+lpfc_handle_eratt_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport = phba->pport;
+	uint32_t event_data;
+	struct Scsi_Host *shost;
+
+	/* If the pci channel is offline, ignore possible errors, since
+	 * we cannot communicate with the pci card anyway.
+	 */
+	if (pci_channel_offline(phba->pcidev))
+		return;
+	/* If resets are disabled then leave the HBA alone and return */
+	if (!phba->cfg_enable_hba_reset)
+		return;
+
+	/* Send an internal error event to mgmt application */
+	lpfc_board_errevt_to_mgmt(phba);
+
+	/* For now, the actual action for SLI4 device handling is not
+	 * specified yet, just treated it as adaptor hardware failure
+	 */
+	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"0143 SLI4 Adapter Hardware Error Data: x%x x%x\n",
+			phba->work_status[0], phba->work_status[1]);
+
+	event_data = FC_REG_DUMP_EVENT;
+	shost = lpfc_shost_from_vport(vport);
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+				  sizeof(event_data), (char *) &event_data,
+				  SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
+
+	lpfc_sli4_offline_eratt(phba);
+}
+
+/**
+ * lpfc_handle_eratt - Wrapper func for handling hba error attention
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba error attention handling
+ * routine from the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes
+ *   0 - sucess.
+ *   Any other value - error.
+ **/
+void
+lpfc_handle_eratt(struct lpfc_hba *phba)
+{
+	(*phba->lpfc_handle_eratt)(phba);
+}
+
+/**
  * lpfc_handle_latt - The HBA link event handler
  * @phba: pointer to lpfc hba data structure.
  *
@@ -1137,7 +1341,7 @@
  *   0 - pointer to the VPD passed in is NULL
  *   1 - success
  **/
-static int
+int
 lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
 {
 	uint8_t lenlo, lenhi;
@@ -1292,6 +1496,7 @@
 	uint16_t dev_id = phba->pcidev->device;
 	int max_speed;
 	int GE = 0;
+	int oneConnect = 0; /* default is not a oneConnect */
 	struct {
 		char * name;
 		int    max_speed;
@@ -1437,6 +1642,14 @@
 	case PCI_DEVICE_ID_PROTEUS_S:
 		m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
 		break;
+	case PCI_DEVICE_ID_TIGERSHARK:
+		oneConnect = 1;
+		m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
+		break;
+	case PCI_DEVICE_ID_TIGERSHARK_S:
+		oneConnect = 1;
+		m = (typeof(m)) {"OCe10100-F-S", max_speed, "PCIe"};
+		break;
 	default:
 		m = (typeof(m)){ NULL };
 		break;
@@ -1444,13 +1657,24 @@
 
 	if (mdp && mdp[0] == '\0')
 		snprintf(mdp, 79,"%s", m.name);
-	if (descp && descp[0] == '\0')
-		snprintf(descp, 255,
-			"Emulex %s %d%s %s %s",
-			m.name, m.max_speed,
-			(GE) ? "GE" : "Gb",
-			m.bus,
-			(GE) ? "FCoE Adapter" : "Fibre Channel Adapter");
+	/* oneConnect hba requires special processing, they are all initiators
+	 * and we put the port number on the end
+	 */
+	if (descp && descp[0] == '\0') {
+		if (oneConnect)
+			snprintf(descp, 255,
+				"Emulex OneConnect %s, FCoE Initiator, Port %s",
+				m.name,
+				phba->Port);
+		else
+			snprintf(descp, 255,
+				"Emulex %s %d%s %s %s",
+				m.name, m.max_speed,
+				(GE) ? "GE" : "Gb",
+				m.bus,
+				(GE) ? "FCoE Adapter" :
+					"Fibre Channel Adapter");
+	}
 }
 
 /**
@@ -1533,7 +1757,8 @@
 		icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
 		icmd->ulpLe = 1;
 
-		if (lpfc_sli_issue_iocb(phba, pring, iocb, 0) == IOCB_ERROR) {
+		if (lpfc_sli_issue_iocb(phba, pring->ringno, iocb, 0) ==
+		    IOCB_ERROR) {
 			lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
 			kfree(mp1);
 			cnt++;
@@ -1761,7 +1986,6 @@
 	 * Lets wait for this to happen, if needed.
 	 */
 	while (!list_empty(&vport->fc_nodes)) {
-
 		if (i++ > 3000) {
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
 				"0233 Nodelist not empty\n");
@@ -1782,7 +2006,6 @@
 		/* Wait for any activity on ndlps to settle */
 		msleep(10);
 	}
-	return;
 }
 
 /**
@@ -1803,22 +2026,36 @@
 }
 
 /**
- * lpfc_stop_phba_timers - Stop all the timers associated with an HBA
+ * lpfc_stop_hba_timers - Stop all the timers associated with an HBA
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine stops all the timers associated with a HBA. This function is
  * invoked before either putting a HBA offline or unloading the driver.
  **/
-static void
-lpfc_stop_phba_timers(struct lpfc_hba *phba)
+void
+lpfc_stop_hba_timers(struct lpfc_hba *phba)
 {
-	del_timer_sync(&phba->fcp_poll_timer);
 	lpfc_stop_vport_timers(phba->pport);
 	del_timer_sync(&phba->sli.mbox_tmo);
 	del_timer_sync(&phba->fabric_block_timer);
-	phba->hb_outstanding = 0;
-	del_timer_sync(&phba->hb_tmofunc);
 	del_timer_sync(&phba->eratt_poll);
+	del_timer_sync(&phba->hb_tmofunc);
+	phba->hb_outstanding = 0;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		/* Stop any LightPulse device specific driver timers */
+		del_timer_sync(&phba->fcp_poll_timer);
+		break;
+	case LPFC_PCI_DEV_OC:
+		/* Stop any OneConnect device sepcific driver timers */
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0297 Invalid device group (x%x)\n",
+				phba->pci_dev_grp);
+		break;
+	}
 	return;
 }
 
@@ -1878,14 +2115,21 @@
 		return 1;
 	}
 
-	if (lpfc_sli_hba_setup(phba)) {	/* Initialize the HBA */
-		lpfc_unblock_mgmt_io(phba);
-		return 1;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */
+			lpfc_unblock_mgmt_io(phba);
+			return 1;
+		}
+	} else {
+		if (lpfc_sli_hba_setup(phba)) {	/* Initialize SLI2/SLI3 HBA */
+			lpfc_unblock_mgmt_io(phba);
+			return 1;
+		}
 	}
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			struct Scsi_Host *shost;
 			shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(shost->host_lock);
@@ -1947,11 +2191,12 @@
 	/* Issue an unreg_login to all nodes on all vports */
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL) {
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			struct Scsi_Host *shost;
 
 			if (vports[i]->load_flag & FC_UNLOADING)
 				continue;
+			vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
 			shost =	lpfc_shost_from_vport(vports[i]);
 			list_for_each_entry_safe(ndlp, next_ndlp,
 						 &vports[i]->fc_nodes,
@@ -1975,7 +2220,7 @@
 	}
 	lpfc_destroy_vport_work_array(phba, vports);
 
-	lpfc_sli_flush_mbox_queue(phba);
+	lpfc_sli_mbox_sys_shutdown(phba);
 }
 
 /**
@@ -1996,11 +2241,11 @@
 	if (phba->pport->fc_flag & FC_OFFLINE_MODE)
 		return;
 
-	/* stop all timers associated with this hba */
-	lpfc_stop_phba_timers(phba);
+	/* stop port and all timers associated with this hba */
+	lpfc_stop_port(phba);
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
 			lpfc_stop_vport_timers(vports[i]);
 	lpfc_destroy_vport_work_array(phba, vports);
 	lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -2013,7 +2258,7 @@
 	spin_unlock_irq(&phba->hbalock);
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(shost->host_lock);
 			vports[i]->work_port_events = 0;
@@ -2106,6 +2351,10 @@
 	shost->max_lun = vport->cfg_max_luns;
 	shost->this_id = -1;
 	shost->max_cmd_len = 16;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		shost->dma_boundary = LPFC_SLI4_MAX_SEGMENT_SIZE;
+		shost->sg_tablesize = phba->cfg_sg_seg_cnt;
+	}
 
 	/*
 	 * Set initial can_queue value since 0 is no longer supported and
@@ -2123,6 +2372,7 @@
 
 	/* Initialize all internally managed lists. */
 	INIT_LIST_HEAD(&vport->fc_nodes);
+	INIT_LIST_HEAD(&vport->rcv_buffer_list);
 	spin_lock_init(&vport->work_port_lock);
 
 	init_timer(&vport->fc_disctmo);
@@ -2314,15 +2564,3461 @@
 }
 
 /**
- * lpfc_enable_msix - Enable MSI-X interrupt mode
+ * lpfc_stop_port_s3 - Stop SLI3 device port
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to enable the MSI-X interrupt vectors. The kernel
- * function pci_enable_msix() is called to enable the MSI-X vectors. Note that
- * pci_enable_msix(), once invoked, enables either all or nothing, depending
- * on the current availability of PCI vector resources. The device driver is
- * responsible for calling the individual request_irq() to register each MSI-X
- * vector with a interrupt handler, which is done in this function. Note that
+ * This routine is invoked to stop an SLI3 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
+ **/
+static void
+lpfc_stop_port_s3(struct lpfc_hba *phba)
+{
+	/* Clear all interrupt enable conditions */
+	writel(0, phba->HCregaddr);
+	readl(phba->HCregaddr); /* flush */
+	/* Clear all pending interrupts */
+	writel(0xffffffff, phba->HAregaddr);
+	readl(phba->HAregaddr); /* flush */
+
+	/* Reset some HBA SLI setup states */
+	lpfc_stop_hba_timers(phba);
+	phba->pport->work_port_events = 0;
+}
+
+/**
+ * lpfc_stop_port_s4 - Stop SLI4 device port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to stop an SLI4 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
+ **/
+static void
+lpfc_stop_port_s4(struct lpfc_hba *phba)
+{
+	/* Reset some HBA SLI4 setup states */
+	lpfc_stop_hba_timers(phba);
+	phba->pport->work_port_events = 0;
+	phba->sli4_hba.intr_enable = 0;
+	/* Hard clear it for now, shall have more graceful way to wait later */
+	phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+}
+
+/**
+ * lpfc_stop_port - Wrapper function for stopping hba port
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba stop port routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ **/
+void
+lpfc_stop_port(struct lpfc_hba *phba)
+{
+	phba->lpfc_stop_port(phba);
+}
+
+/**
+ * lpfc_sli4_remove_dflt_fcf - Remove the driver default fcf record from the port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the driver default fcf record from
+ * the port.  This routine currently acts on FCF Index 0.
+ *
+ **/
+void
+lpfc_sli_remove_dflt_fcf(struct lpfc_hba *phba)
+{
+	int rc = 0;
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mbx_del_fcf_tbl_entry *del_fcf_record;
+	uint32_t mbox_tmo, req_len;
+	uint32_t shdr_status, shdr_add_status;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2020 Failed to allocate mbox for ADD_FCF cmd\n");
+		return;
+	}
+
+	req_len = sizeof(struct lpfc_mbx_del_fcf_tbl_entry) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr);
+	rc = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+			      LPFC_MBOX_OPCODE_FCOE_DELETE_FCF,
+			      req_len, LPFC_SLI4_MBX_EMBED);
+	/*
+	 * In phase 1, there is a single FCF index, 0.  In phase2, the driver
+	 * supports multiple FCF indices.
+	 */
+	del_fcf_record = &mboxq->u.mqe.un.del_fcf_entry;
+	bf_set(lpfc_mbx_del_fcf_tbl_count, del_fcf_record, 1);
+	bf_set(lpfc_mbx_del_fcf_tbl_index, del_fcf_record,
+	       phba->fcf.fcf_indx);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	}
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr_status = bf_get(lpfc_mbox_hdr_status,
+			     &del_fcf_record->header.cfg_shdr.response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+				 &del_fcf_record->header.cfg_shdr.response);
+	if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2516 DEL FCF of default FCF Index failed "
+				"mbx status x%x, status x%x add_status x%x\n",
+				rc, shdr_status, shdr_add_status);
+	}
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link fault code and
+ * translate it into the base driver's read link attention mailbox command
+ * status.
+ *
+ * Return: Link-attention status in terms of base driver's coding.
+ **/
+static uint16_t
+lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
+			   struct lpfc_acqe_link *acqe_link)
+{
+	uint16_t latt_fault;
+
+	switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
+	case LPFC_ASYNC_LINK_FAULT_NONE:
+	case LPFC_ASYNC_LINK_FAULT_LOCAL:
+	case LPFC_ASYNC_LINK_FAULT_REMOTE:
+		latt_fault = 0;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0398 Invalid link fault code: x%x\n",
+				bf_get(lpfc_acqe_link_fault, acqe_link));
+		latt_fault = MBXERR_ERROR;
+		break;
+	}
+	return latt_fault;
+}
+
+/**
+ * lpfc_sli4_parse_latt_type - Parse sli4 link attention type
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link attention type and translate it
+ * into the base driver's link attention type coding.
+ *
+ * Return: Link attention type in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
+			  struct lpfc_acqe_link *acqe_link)
+{
+	uint8_t att_type;
+
+	switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
+	case LPFC_ASYNC_LINK_STATUS_DOWN:
+	case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
+		att_type = AT_LINK_DOWN;
+		break;
+	case LPFC_ASYNC_LINK_STATUS_UP:
+		/* Ignore physical link up events - wait for logical link up */
+		att_type = AT_RESERVED;
+		break;
+	case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
+		att_type = AT_LINK_UP;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0399 Invalid link attention type: x%x\n",
+				bf_get(lpfc_acqe_link_status, acqe_link));
+		att_type = AT_RESERVED;
+		break;
+	}
+	return att_type;
+}
+
+/**
+ * lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link speed and translate
+ * it into the base driver's link-attention link speed coding.
+ *
+ * Return: Link-attention link speed in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
+				struct lpfc_acqe_link *acqe_link)
+{
+	uint8_t link_speed;
+
+	switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
+	case LPFC_ASYNC_LINK_SPEED_ZERO:
+		link_speed = LA_UNKNW_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_10MBPS:
+		link_speed = LA_UNKNW_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_100MBPS:
+		link_speed = LA_UNKNW_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_1GBPS:
+		link_speed = LA_1GHZ_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_10GBPS:
+		link_speed = LA_10GHZ_LINK;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0483 Invalid link-attention link speed: x%x\n",
+				bf_get(lpfc_acqe_link_speed, acqe_link));
+		link_speed = LA_UNKNW_LINK;
+		break;
+	}
+	return link_speed;
+}
+
+/**
+ * lpfc_sli4_async_link_evt - Process the asynchronous link event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous link event.
+ **/
+static void
+lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_link *acqe_link)
+{
+	struct lpfc_dmabuf *mp;
+	LPFC_MBOXQ_t *pmb;
+	MAILBOX_t *mb;
+	READ_LA_VAR *la;
+	uint8_t att_type;
+
+	att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
+	if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
+		return;
+	pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0395 The mboxq allocation failed\n");
+		return;
+	}
+	mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!mp) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0396 The lpfc_dmabuf allocation failed\n");
+		goto out_free_pmb;
+	}
+	mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+	if (!mp->virt) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0397 The mbuf allocation failed\n");
+		goto out_free_dmabuf;
+	}
+
+	/* Cleanup any outstanding ELS commands */
+	lpfc_els_flush_all_cmd(phba);
+
+	/* Block ELS IOCBs until we have done process link event */
+	phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
+
+	/* Update link event statistics */
+	phba->sli.slistat.link_event++;
+
+	/* Create pseudo lpfc_handle_latt mailbox command from link ACQE */
+	lpfc_read_la(phba, pmb, mp);
+	pmb->vport = phba->pport;
+
+	/* Parse and translate status field */
+	mb = &pmb->u.mb;
+	mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);
+
+	/* Parse and translate link attention fields */
+	la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
+	la->eventTag = acqe_link->event_tag;
+	la->attType = att_type;
+	la->UlnkSpeed = lpfc_sli4_parse_latt_link_speed(phba, acqe_link);
+
+	/* Fake the the following irrelvant fields */
+	la->topology = TOPOLOGY_PT_PT;
+	la->granted_AL_PA = 0;
+	la->il = 0;
+	la->pb = 0;
+	la->fa = 0;
+	la->mm = 0;
+
+	/* Keep the link status for extra SLI4 state machine reference */
+	phba->sli4_hba.link_state.speed =
+				bf_get(lpfc_acqe_link_speed, acqe_link);
+	phba->sli4_hba.link_state.duplex =
+				bf_get(lpfc_acqe_link_duplex, acqe_link);
+	phba->sli4_hba.link_state.status =
+				bf_get(lpfc_acqe_link_status, acqe_link);
+	phba->sli4_hba.link_state.physical =
+				bf_get(lpfc_acqe_link_physical, acqe_link);
+	phba->sli4_hba.link_state.fault =
+				bf_get(lpfc_acqe_link_fault, acqe_link);
+
+	/* Invoke the lpfc_handle_latt mailbox command callback function */
+	lpfc_mbx_cmpl_read_la(phba, pmb);
+
+	return;
+
+out_free_dmabuf:
+	kfree(mp);
+out_free_pmb:
+	mempool_free(pmb, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async fcoe completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous fcoe event.
+ **/
+static void
+lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_fcoe *acqe_fcoe)
+{
+	uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
+	int rc;
+
+	switch (event_type) {
+	case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+			"2546 New FCF found index 0x%x tag 0x%x \n",
+			acqe_fcoe->fcf_index,
+			acqe_fcoe->event_tag);
+		/*
+		 * If the current FCF is in discovered state,
+		 * do nothing.
+		 */
+		spin_lock_irq(&phba->hbalock);
+		if (phba->fcf.fcf_flag & FCF_DISCOVERED) {
+			spin_unlock_irq(&phba->hbalock);
+			break;
+		}
+		spin_unlock_irq(&phba->hbalock);
+
+		/* Read the FCF table and re-discover SAN. */
+		rc = lpfc_sli4_read_fcf_record(phba,
+			LPFC_FCOE_FCF_GET_FIRST);
+		if (rc)
+			lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+				"2547 Read FCF record failed 0x%x\n",
+				rc);
+		break;
+
+	case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2548 FCF Table full count 0x%x tag 0x%x \n",
+			bf_get(lpfc_acqe_fcoe_fcf_count, acqe_fcoe),
+			acqe_fcoe->event_tag);
+		break;
+
+	case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+			"2549 FCF disconnected fron network index 0x%x"
+			" tag 0x%x \n", acqe_fcoe->fcf_index,
+			acqe_fcoe->event_tag);
+		/* If the event is not for currently used fcf do nothing */
+		if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
+			break;
+		/*
+		 * Currently, driver support only one FCF - so treat this as
+		 * a link down.
+		 */
+		lpfc_linkdown(phba);
+		/* Unregister FCF if no devices connected to it */
+		lpfc_unregister_unused_fcf(phba);
+		break;
+
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"0288 Unknown FCoE event type 0x%x event tag "
+			"0x%x\n", event_type, acqe_fcoe->event_tag);
+		break;
+	}
+}
+
+/**
+ * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async dcbx completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous dcbx event.
+ **/
+static void
+lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_dcbx *acqe_dcbx)
+{
+	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"0290 The SLI4 DCBX asynchronous event is not "
+			"handled yet\n");
+}
+
+/**
+ * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 asynchronous events.
+ **/
+void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+
+	/* First, declare the async event has been handled */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~ASYNC_EVENT;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, handle all the async events */
+	while (!list_empty(&phba->sli4_hba.sp_asynce_work_queue)) {
+		/* Get the first event from the head of the event queue */
+		spin_lock_irq(&phba->hbalock);
+		list_remove_head(&phba->sli4_hba.sp_asynce_work_queue,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irq(&phba->hbalock);
+		/* Process the asynchronous event */
+		switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
+		case LPFC_TRAILER_CODE_LINK:
+			lpfc_sli4_async_link_evt(phba,
+						 &cq_event->cqe.acqe_link);
+			break;
+		case LPFC_TRAILER_CODE_FCOE:
+			lpfc_sli4_async_fcoe_evt(phba,
+						 &cq_event->cqe.acqe_fcoe);
+			break;
+		case LPFC_TRAILER_CODE_DCBX:
+			lpfc_sli4_async_dcbx_evt(phba,
+						 &cq_event->cqe.acqe_dcbx);
+			break;
+		default:
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"1804 Invalid asynchrous event code: "
+					"x%x\n", bf_get(lpfc_trailer_code,
+					&cq_event->cqe.mcqe_cmpl));
+			break;
+		}
+		/* Free the completion event processed to the free pool */
+		lpfc_sli4_cq_event_release(phba, cq_event);
+	}
+}
+
+/**
+ * lpfc_api_table_setup - Set up per hba pci-device group func api jump table
+ * @phba: pointer to lpfc hba data structure.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine is invoked to set up the per HBA PCI-Device group function
+ * API jump table entries.
+ *
+ * Return: 0 if success, otherwise -ENODEV
+ **/
+int
+lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+	int rc;
+
+	/* Set up lpfc PCI-device group */
+	phba->pci_dev_grp = dev_grp;
+
+	/* The LPFC_PCI_DEV_OC uses SLI4 */
+	if (dev_grp == LPFC_PCI_DEV_OC)
+		phba->sli_rev = LPFC_SLI_REV4;
+
+	/* Set up device INIT API function jump table */
+	rc = lpfc_init_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+	/* Set up SCSI API function jump table */
+	rc = lpfc_scsi_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+	/* Set up SLI API function jump table */
+	rc = lpfc_sli_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+	/* Set up MBOX API function jump table */
+	rc = lpfc_mbox_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+
+	return 0;
+}
+
+/**
+ * lpfc_log_intr_mode - Log the active interrupt mode
+ * @phba: pointer to lpfc hba data structure.
+ * @intr_mode: active interrupt mode adopted.
+ *
+ * This routine it invoked to log the currently used active interrupt mode
+ * to the device.
+ **/
+static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
+{
+	switch (intr_mode) {
+	case 0:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0470 Enable INTx interrupt mode.\n");
+		break;
+	case 1:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0481 Enabled MSI interrupt mode.\n");
+		break;
+	case 2:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0480 Enabled MSI-X interrupt mode.\n");
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0482 Illegal interrupt mode.\n");
+		break;
+	}
+	return;
+}
+
+/**
+ * lpfc_enable_pci_dev - Enable a generic PCI device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the PCI device that is common to all
+ * PCI devices.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_enable_pci_dev(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	int bars;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		goto out_error;
+	else
+		pdev = phba->pcidev;
+	/* Select PCI BARs */
+	bars = pci_select_bars(pdev, IORESOURCE_MEM);
+	/* Enable PCI device */
+	if (pci_enable_device_mem(pdev))
+		goto out_error;
+	/* Request PCI resource for the device */
+	if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
+		goto out_disable_device;
+	/* Set up device as PCI master and save state for EEH */
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+	pci_save_state(pdev);
+
+	return 0;
+
+out_disable_device:
+	pci_disable_device(pdev);
+out_error:
+	return -ENODEV;
+}
+
+/**
+ * lpfc_disable_pci_dev - Disable a generic PCI device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the PCI device that is common to all
+ * PCI devices.
+ **/
+static void
+lpfc_disable_pci_dev(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	int bars;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return;
+	else
+		pdev = phba->pcidev;
+	/* Select PCI BARs */
+	bars = pci_select_bars(pdev, IORESOURCE_MEM);
+	/* Release PCI resource and disable PCI device */
+	pci_release_selected_regions(pdev, bars);
+	pci_disable_device(pdev);
+	/* Null out PCI private reference to driver */
+	pci_set_drvdata(pdev, NULL);
+
+	return;
+}
+
+/**
+ * lpfc_reset_hba - Reset a hba
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to reset a hba device. It brings the HBA
+ * offline, performs a board restart, and then brings the board back
+ * online. The lpfc_offline calls lpfc_sli_hba_down which will clean up
+ * on outstanding mailbox commands.
+ **/
+void
+lpfc_reset_hba(struct lpfc_hba *phba)
+{
+	/* If resets are disabled then set error state and return. */
+	if (!phba->cfg_enable_hba_reset) {
+		phba->link_state = LPFC_HBA_ERROR;
+		return;
+	}
+	lpfc_offline_prep(phba);
+	lpfc_offline(phba);
+	lpfc_sli_brdrestart(phba);
+	lpfc_online(phba);
+	lpfc_unblock_mgmt_io(phba);
+}
+
+/**
+ * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-3 HBA device it attached to.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli;
+
+	/*
+	 * Initialize timers used by driver
+	 */
+
+	/* Heartbeat timer */
+	init_timer(&phba->hb_tmofunc);
+	phba->hb_tmofunc.function = lpfc_hb_timeout;
+	phba->hb_tmofunc.data = (unsigned long)phba;
+
+	psli = &phba->sli;
+	/* MBOX heartbeat timer */
+	init_timer(&psli->mbox_tmo);
+	psli->mbox_tmo.function = lpfc_mbox_timeout;
+	psli->mbox_tmo.data = (unsigned long) phba;
+	/* FCP polling mode timer */
+	init_timer(&phba->fcp_poll_timer);
+	phba->fcp_poll_timer.function = lpfc_poll_timeout;
+	phba->fcp_poll_timer.data = (unsigned long) phba;
+	/* Fabric block timer */
+	init_timer(&phba->fabric_block_timer);
+	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+	phba->fabric_block_timer.data = (unsigned long) phba;
+	/* EA polling mode timer */
+	init_timer(&phba->eratt_poll);
+	phba->eratt_poll.function = lpfc_poll_eratt;
+	phba->eratt_poll.data = (unsigned long) phba;
+
+	/* Host attention work mask setup */
+	phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
+	phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
+
+	/* Get all the module params for configuring this host */
+	lpfc_get_cfgparam(phba);
+	/*
+	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+	 * used to create the sg_dma_buf_pool must be dynamically calculated.
+	 * 2 segments are added since the IOCB needs a command and response bde.
+	 */
+	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+		sizeof(struct fcp_rsp) +
+			((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
+
+	if (phba->cfg_enable_bg) {
+		phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
+		phba->cfg_sg_dma_buf_size +=
+			phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
+	}
+
+	/* Also reinitialize the host templates with new values. */
+	lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+	lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+
+	phba->max_vpi = LPFC_MAX_VPI;
+	/* This will be set to correct value after config_port mbox */
+	phba->max_vports = 0;
+
+	/*
+	 * Initialize the SLI Layer to run with lpfc HBAs.
+	 */
+	lpfc_sli_setup(phba);
+	lpfc_sli_queue_setup(phba);
+
+	/* Allocate device driver memory */
+	if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
+		return -ENOMEM;
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-3 HBA device it attached to.
+ **/
+static void
+lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
+{
+	/* Free device driver memory allocated */
+	lpfc_mem_free_all(phba);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-4 HBA device it attached to.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli;
+	int rc;
+	int i, hbq_count;
+
+	/* Before proceed, wait for POST done and device ready */
+	rc = lpfc_sli4_post_status_check(phba);
+	if (rc)
+		return -ENODEV;
+
+	/*
+	 * Initialize timers used by driver
+	 */
+
+	/* Heartbeat timer */
+	init_timer(&phba->hb_tmofunc);
+	phba->hb_tmofunc.function = lpfc_hb_timeout;
+	phba->hb_tmofunc.data = (unsigned long)phba;
+
+	psli = &phba->sli;
+	/* MBOX heartbeat timer */
+	init_timer(&psli->mbox_tmo);
+	psli->mbox_tmo.function = lpfc_mbox_timeout;
+	psli->mbox_tmo.data = (unsigned long) phba;
+	/* Fabric block timer */
+	init_timer(&phba->fabric_block_timer);
+	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+	phba->fabric_block_timer.data = (unsigned long) phba;
+	/* EA polling mode timer */
+	init_timer(&phba->eratt_poll);
+	phba->eratt_poll.function = lpfc_poll_eratt;
+	phba->eratt_poll.data = (unsigned long) phba;
+	/*
+	 * We need to do a READ_CONFIG mailbox command here before
+	 * calling lpfc_get_cfgparam. For VFs this will report the
+	 * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
+	 * All of the resources allocated
+	 * for this Port are tied to these values.
+	 */
+	/* Get all the module params for configuring this host */
+	lpfc_get_cfgparam(phba);
+	phba->max_vpi = LPFC_MAX_VPI;
+	/* This will be set to correct value after the read_config mbox */
+	phba->max_vports = 0;
+
+	/* Program the default value of vlan_id and fc_map */
+	phba->valid_vlan = 0;
+	phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+	phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+	phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+	/*
+	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+	 * used to create the sg_dma_buf_pool must be dynamically calculated.
+	 * 2 segments are added since the IOCB needs a command and response bde.
+	 * To insure that the scsi sgl does not cross a 4k page boundary only
+	 * sgl sizes of 1k, 2k, 4k, and 8k are supported.
+	 * Table of sgl sizes and seg_cnt:
+	 * sgl size, 	sg_seg_cnt	total seg
+	 * 1k		50		52
+	 * 2k		114		116
+	 * 4k		242		244
+	 * 8k		498		500
+	 * cmd(32) + rsp(160) + (52 * sizeof(sli4_sge)) = 1024
+	 * cmd(32) + rsp(160) + (116 * sizeof(sli4_sge)) = 2048
+	 * cmd(32) + rsp(160) + (244 * sizeof(sli4_sge)) = 4096
+	 * cmd(32) + rsp(160) + (500 * sizeof(sli4_sge)) = 8192
+	 */
+	if (phba->cfg_sg_seg_cnt <= LPFC_DEFAULT_SG_SEG_CNT)
+		phba->cfg_sg_seg_cnt = 50;
+	else if (phba->cfg_sg_seg_cnt <= 114)
+		phba->cfg_sg_seg_cnt = 114;
+	else if (phba->cfg_sg_seg_cnt <= 242)
+		phba->cfg_sg_seg_cnt = 242;
+	else
+		phba->cfg_sg_seg_cnt = 498;
+
+	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd)
+					+ sizeof(struct fcp_rsp);
+	phba->cfg_sg_dma_buf_size +=
+		((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
+
+	/* Initialize buffer queue management fields */
+	hbq_count = lpfc_sli_hbq_count();
+	for (i = 0; i < hbq_count; ++i)
+		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
+	INIT_LIST_HEAD(&phba->rb_pend_list);
+	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc;
+	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free;
+
+	/*
+	 * Initialize the SLI Layer to run with lpfc SLI4 HBAs.
+	 */
+	/* Initialize the Abort scsi buffer list used by driver */
+	spin_lock_init(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_scsi_buf_list);
+	/* This abort list used by worker thread */
+	spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock);
+
+	/*
+	 * Initialize dirver internal slow-path work queues
+	 */
+
+	/* Driver internel slow-path CQ Event pool */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
+	/* Response IOCB work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_rspiocb_work_queue);
+	/* Asynchronous event CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
+	/* Fast-path XRI aborted CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+	/* Slow-path XRI aborted CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_els_xri_aborted_work_queue);
+	/* Receive queue CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);
+
+	/* Initialize the driver internal SLI layer lists. */
+	lpfc_sli_setup(phba);
+	lpfc_sli_queue_setup(phba);
+
+	/* Allocate device driver memory */
+	rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ);
+	if (rc)
+		return -ENOMEM;
+
+	/* Create the bootstrap mailbox command */
+	rc = lpfc_create_bootstrap_mbox(phba);
+	if (unlikely(rc))
+		goto out_free_mem;
+
+	/* Set up the host's endian order with the device. */
+	rc = lpfc_setup_endian_order(phba);
+	if (unlikely(rc))
+		goto out_free_bsmbx;
+
+	/* Set up the hba's configuration parameters. */
+	rc = lpfc_sli4_read_config(phba);
+	if (unlikely(rc))
+		goto out_free_bsmbx;
+
+	/* Perform a function reset */
+	rc = lpfc_pci_function_reset(phba);
+	if (unlikely(rc))
+		goto out_free_bsmbx;
+
+	/* Create all the SLI4 queues */
+	rc = lpfc_sli4_queue_create(phba);
+	if (rc)
+		goto out_free_bsmbx;
+
+	/* Create driver internal CQE event pool */
+	rc = lpfc_sli4_cq_event_pool_create(phba);
+	if (rc)
+		goto out_destroy_queue;
+
+	/* Initialize and populate the iocb list per host */
+	rc = lpfc_init_sgl_list(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1400 Failed to initialize sgl list.\n");
+		goto out_destroy_cq_event_pool;
+	}
+	rc = lpfc_init_active_sgl_array(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1430 Failed to initialize sgl list.\n");
+		goto out_free_sgl_list;
+	}
+
+	rc = lpfc_sli4_init_rpi_hdrs(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1432 Failed to initialize rpi headers.\n");
+		goto out_free_active_sgl;
+	}
+
+	phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
+				    phba->cfg_fcp_eq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fcp_eq_hdl) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2572 Failed allocate memory for fast-path "
+				"per-EQ handle array\n");
+		goto out_remove_rpi_hdrs;
+	}
+
+	phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
+				      phba->sli4_hba.cfg_eqn), GFP_KERNEL);
+	if (!phba->sli4_hba.msix_entries) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2573 Failed allocate memory for msi-x "
+				"interrupt vector entries\n");
+		goto out_free_fcp_eq_hdl;
+	}
+
+	return rc;
+
+out_free_fcp_eq_hdl:
+	kfree(phba->sli4_hba.fcp_eq_hdl);
+out_remove_rpi_hdrs:
+	lpfc_sli4_remove_rpi_hdrs(phba);
+out_free_active_sgl:
+	lpfc_free_active_sgl(phba);
+out_free_sgl_list:
+	lpfc_free_sgl_list(phba);
+out_destroy_cq_event_pool:
+	lpfc_sli4_cq_event_pool_destroy(phba);
+out_destroy_queue:
+	lpfc_sli4_queue_destroy(phba);
+out_free_bsmbx:
+	lpfc_destroy_bootstrap_mbox(phba);
+out_free_mem:
+	lpfc_mem_free(phba);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-4 HBA device it attached to.
+ **/
+static void
+lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
+{
+	struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
+
+	/* unregister default FCFI from the HBA */
+	lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
+
+	/* Free the default FCR table */
+	lpfc_sli_remove_dflt_fcf(phba);
+
+	/* Free memory allocated for msi-x interrupt vector entries */
+	kfree(phba->sli4_hba.msix_entries);
+
+	/* Free memory allocated for fast-path work queue handles */
+	kfree(phba->sli4_hba.fcp_eq_hdl);
+
+	/* Free the allocated rpi headers. */
+	lpfc_sli4_remove_rpi_hdrs(phba);
+
+	/* Free the ELS sgl list */
+	lpfc_free_active_sgl(phba);
+	lpfc_free_sgl_list(phba);
+
+	/* Free the SCSI sgl management array */
+	kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+
+	/* Free the SLI4 queues */
+	lpfc_sli4_queue_destroy(phba);
+
+	/* Free the completion queue EQ event pool */
+	lpfc_sli4_cq_event_release_all(phba);
+	lpfc_sli4_cq_event_pool_destroy(phba);
+
+	/* Reset SLI4 HBA FCoE function */
+	lpfc_pci_function_reset(phba);
+
+	/* Free the bsmbx region. */
+	lpfc_destroy_bootstrap_mbox(phba);
+
+	/* Free the SLI Layer memory with SLI4 HBAs */
+	lpfc_mem_free_all(phba);
+
+	/* Free the current connect table */
+	list_for_each_entry_safe(conn_entry, next_conn_entry,
+		&phba->fcf_conn_rec_list, list)
+		kfree(conn_entry);
+
+	return;
+}
+
+/**
+ * lpfc_init_api_table_setup - Set up init api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the device INIT interface API function jump table
+ * in @phba struct.
+ *
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
+		phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
+		phba->lpfc_stop_port = lpfc_stop_port_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_hba_down_post = lpfc_hba_down_post_s4;
+		phba->lpfc_handle_eratt = lpfc_handle_eratt_s4;
+		phba->lpfc_stop_port = lpfc_stop_port_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1431 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources before the
+ * device specific resource setup to support the HBA device it attached to.
+ *
+ * Return codes
+ *	0 - sucessful
+ *	other values - error
+ **/
+static int
+lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
+{
+	/*
+	 * Driver resources common to all SLI revisions
+	 */
+	atomic_set(&phba->fast_event_count, 0);
+	spin_lock_init(&phba->hbalock);
+
+	/* Initialize ndlp management spinlock */
+	spin_lock_init(&phba->ndlp_lock);
+
+	INIT_LIST_HEAD(&phba->port_list);
+	INIT_LIST_HEAD(&phba->work_list);
+	init_waitqueue_head(&phba->wait_4_mlo_m_q);
+
+	/* Initialize the wait queue head for the kernel thread */
+	init_waitqueue_head(&phba->work_waitq);
+
+	/* Initialize the scsi buffer list used by driver for scsi IO */
+	spin_lock_init(&phba->scsi_buf_list_lock);
+	INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
+
+	/* Initialize the fabric iocb list */
+	INIT_LIST_HEAD(&phba->fabric_iocb_list);
+
+	/* Initialize list to save ELS buffers */
+	INIT_LIST_HEAD(&phba->elsbuf);
+
+	/* Initialize FCF connection rec list */
+	INIT_LIST_HEAD(&phba->fcf_conn_rec_list);
+
+	return 0;
+}
+
+/**
+ * lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources after the
+ * device specific resource setup to support the HBA device it attached to.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_setup_driver_resource_phase2(struct lpfc_hba *phba)
+{
+	int error;
+
+	/* Startup the kernel thread for this host adapter. */
+	phba->worker_thread = kthread_run(lpfc_do_work, phba,
+					  "lpfc_worker_%d", phba->brd_no);
+	if (IS_ERR(phba->worker_thread)) {
+		error = PTR_ERR(phba->worker_thread);
+		return error;
+	}
+
+	return 0;
+}
+
+/**
+ * lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up after
+ * the device specific resource setup for supporting the HBA device it
+ * attached to.
+ **/
+static void
+lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba)
+{
+	/* Stop kernel worker thread */
+	kthread_stop(phba->worker_thread);
+}
+
+/**
+ * lpfc_free_iocb_list - Free iocb list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's IOCB list and memory.
+ **/
+static void
+lpfc_free_iocb_list(struct lpfc_hba *phba)
+{
+	struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
+
+	spin_lock_irq(&phba->hbalock);
+	list_for_each_entry_safe(iocbq_entry, iocbq_next,
+				 &phba->lpfc_iocb_list, list) {
+		list_del(&iocbq_entry->list);
+		kfree(iocbq_entry);
+		phba->total_iocbq_bufs--;
+	}
+	spin_unlock_irq(&phba->hbalock);
+
+	return;
+}
+
+/**
+ * lpfc_init_iocb_list - Allocate and initialize iocb list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and initizlize the driver's IOCB
+ * list and set up the IOCB tag array accordingly.
+ *
+ * Return codes
+ *	0 - sucessful
+ *	other values - error
+ **/
+static int
+lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count)
+{
+	struct lpfc_iocbq *iocbq_entry = NULL;
+	uint16_t iotag;
+	int i;
+
+	/* Initialize and populate the iocb list per host.  */
+	INIT_LIST_HEAD(&phba->lpfc_iocb_list);
+	for (i = 0; i < iocb_count; i++) {
+		iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
+		if (iocbq_entry == NULL) {
+			printk(KERN_ERR "%s: only allocated %d iocbs of "
+				"expected %d count. Unloading driver.\n",
+				__func__, i, LPFC_IOCB_LIST_CNT);
+			goto out_free_iocbq;
+		}
+
+		iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
+		if (iotag == 0) {
+			kfree(iocbq_entry);
+			printk(KERN_ERR "%s: failed to allocate IOTAG. "
+				"Unloading driver.\n", __func__);
+			goto out_free_iocbq;
+		}
+		iocbq_entry->sli4_xritag = NO_XRI;
+
+		spin_lock_irq(&phba->hbalock);
+		list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
+		phba->total_iocbq_bufs++;
+		spin_unlock_irq(&phba->hbalock);
+	}
+
+	return 0;
+
+out_free_iocbq:
+	lpfc_free_iocb_list(phba);
+
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_free_sgl_list - Free sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's sgl list and memory.
+ **/
+static void
+lpfc_free_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+	LIST_HEAD(sglq_list);
+	int rc = 0;
+
+	spin_lock_irq(&phba->hbalock);
+	list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
+	spin_unlock_irq(&phba->hbalock);
+
+	list_for_each_entry_safe(sglq_entry, sglq_next,
+				 &sglq_list, list) {
+		list_del(&sglq_entry->list);
+		lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
+		kfree(sglq_entry);
+		phba->sli4_hba.total_sglq_bufs--;
+	}
+	rc = lpfc_sli4_remove_all_sgl_pages(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2005 Unable to deregister pages from HBA: %x", rc);
+	}
+	kfree(phba->sli4_hba.lpfc_els_sgl_array);
+}
+
+/**
+ * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate the driver's active sgl memory.
+ * This array will hold the sglq_entry's for active IOs.
+ **/
+static int
+lpfc_init_active_sgl_array(struct lpfc_hba *phba)
+{
+	int size;
+	size = sizeof(struct lpfc_sglq *);
+	size *= phba->sli4_hba.max_cfg_param.max_xri;
+
+	phba->sli4_hba.lpfc_sglq_active_list =
+		kzalloc(size, GFP_KERNEL);
+	if (!phba->sli4_hba.lpfc_sglq_active_list)
+		return -ENOMEM;
+	return 0;
+}
+
+/**
+ * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to walk through the array of active sglq entries
+ * and free all of the resources.
+ * This is just a place holder for now.
+ **/
+static void
+lpfc_free_active_sgl(struct lpfc_hba *phba)
+{
+	kfree(phba->sli4_hba.lpfc_sglq_active_list);
+}
+
+/**
+ * lpfc_init_sgl_list - Allocate and initialize sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and initizlize the driver's sgl
+ * list and set up the sgl xritag tag array accordingly.
+ *
+ * Return codes
+ *	0 - sucessful
+ *	other values - error
+ **/
+static int
+lpfc_init_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry = NULL;
+	int i;
+	int els_xri_cnt;
+
+	els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"2400 lpfc_init_sgl_list els %d.\n",
+				els_xri_cnt);
+	/* Initialize and populate the sglq list per host/VF. */
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
+
+	/* Sanity check on XRI management */
+	if (phba->sli4_hba.max_cfg_param.max_xri <= els_xri_cnt) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2562 No room left for SCSI XRI allocation: "
+				"max_xri=%d, els_xri=%d\n",
+				phba->sli4_hba.max_cfg_param.max_xri,
+				els_xri_cnt);
+		return -ENOMEM;
+	}
+
+	/* Allocate memory for the ELS XRI management array */
+	phba->sli4_hba.lpfc_els_sgl_array =
+			kzalloc((sizeof(struct lpfc_sglq *) * els_xri_cnt),
+			GFP_KERNEL);
+
+	if (!phba->sli4_hba.lpfc_els_sgl_array) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2401 Failed to allocate memory for ELS "
+				"XRI management array of size %d.\n",
+				els_xri_cnt);
+		return -ENOMEM;
+	}
+
+	/* Keep the SCSI XRI into the XRI management array */
+	phba->sli4_hba.scsi_xri_max =
+			phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
+	phba->sli4_hba.scsi_xri_cnt = 0;
+
+	phba->sli4_hba.lpfc_scsi_psb_array =
+			kzalloc((sizeof(struct lpfc_scsi_buf *) *
+			phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
+
+	if (!phba->sli4_hba.lpfc_scsi_psb_array) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2563 Failed to allocate memory for SCSI "
+				"XRI management array of size %d.\n",
+				phba->sli4_hba.scsi_xri_max);
+		kfree(phba->sli4_hba.lpfc_els_sgl_array);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < els_xri_cnt; i++) {
+		sglq_entry = kzalloc(sizeof(struct lpfc_sglq), GFP_KERNEL);
+		if (sglq_entry == NULL) {
+			printk(KERN_ERR "%s: only allocated %d sgls of "
+				"expected %d count. Unloading driver.\n",
+				__func__, i, els_xri_cnt);
+			goto out_free_mem;
+		}
+
+		sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba);
+		if (sglq_entry->sli4_xritag == NO_XRI) {
+			kfree(sglq_entry);
+			printk(KERN_ERR "%s: failed to allocate XRI.\n"
+				"Unloading driver.\n", __func__);
+			goto out_free_mem;
+		}
+		sglq_entry->buff_type = GEN_BUFF_TYPE;
+		sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
+		if (sglq_entry->virt == NULL) {
+			kfree(sglq_entry);
+			printk(KERN_ERR "%s: failed to allocate mbuf.\n"
+				"Unloading driver.\n", __func__);
+			goto out_free_mem;
+		}
+		sglq_entry->sgl = sglq_entry->virt;
+		memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
+
+		/* The list order is used by later block SGL registraton */
+		spin_lock_irq(&phba->hbalock);
+		list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
+		phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
+		phba->sli4_hba.total_sglq_bufs++;
+		spin_unlock_irq(&phba->hbalock);
+	}
+	return 0;
+
+out_free_mem:
+	kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+	lpfc_free_sgl_list(phba);
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ * No locks are held here because this is an initialization routine
+ * called only from probe or lpfc_online when interrupts are not
+ * enabled and the driver is reinitializing the device.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
+{
+	int rc = 0;
+	int longs;
+	uint16_t rpi_count;
+	struct lpfc_rpi_hdr *rpi_hdr;
+
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
+
+	/*
+	 * Provision an rpi bitmask range for discovery. The total count
+	 * is the difference between max and base + 1.
+	 */
+	rpi_count = phba->sli4_hba.max_cfg_param.rpi_base +
+		    phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+	longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG;
+	phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long),
+					   GFP_KERNEL);
+	if (!phba->sli4_hba.rpi_bmask)
+		return -ENOMEM;
+
+	rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+	if (!rpi_hdr) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0391 Error during rpi post operation\n");
+		lpfc_sli4_remove_rpis(phba);
+		rc = -ENODEV;
+	}
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate a single 4KB memory region to
+ * support rpis and stores them in the phba.  This single region
+ * provides support for up to 64 rpis.  The region is used globally
+ * by the device.
+ *
+ * Returns:
+ *   A valid rpi hdr on success.
+ *   A NULL pointer on any failure.
+ **/
+struct lpfc_rpi_hdr *
+lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
+{
+	uint16_t rpi_limit, curr_rpi_range;
+	struct lpfc_dmabuf *dmabuf;
+	struct lpfc_rpi_hdr *rpi_hdr;
+
+	rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
+		    phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+	spin_lock_irq(&phba->hbalock);
+	curr_rpi_range = phba->sli4_hba.next_rpi;
+	spin_unlock_irq(&phba->hbalock);
+
+	/*
+	 * The port has a limited number of rpis. The increment here
+	 * is LPFC_RPI_HDR_COUNT - 1 to account for the starting value
+	 * and to allow the full max_rpi range per port.
+	 */
+	if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
+		return NULL;
+
+	/*
+	 * First allocate the protocol header region for the port.  The
+	 * port expects a 4KB DMA-mapped memory region that is 4K aligned.
+	 */
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return NULL;
+
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+					  LPFC_HDR_TEMPLATE_SIZE,
+					  &dmabuf->phys,
+					  GFP_KERNEL);
+	if (!dmabuf->virt) {
+		rpi_hdr = NULL;
+		goto err_free_dmabuf;
+	}
+
+	memset(dmabuf->virt, 0, LPFC_HDR_TEMPLATE_SIZE);
+	if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
+		rpi_hdr = NULL;
+		goto err_free_coherent;
+	}
+
+	/* Save the rpi header data for cleanup later. */
+	rpi_hdr = kzalloc(sizeof(struct lpfc_rpi_hdr), GFP_KERNEL);
+	if (!rpi_hdr)
+		goto err_free_coherent;
+
+	rpi_hdr->dmabuf = dmabuf;
+	rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
+	rpi_hdr->page_count = 1;
+	spin_lock_irq(&phba->hbalock);
+	rpi_hdr->start_rpi = phba->sli4_hba.next_rpi;
+	list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
+
+	/*
+	 * The next_rpi stores the next module-64 rpi value to post
+	 * in any subsequent rpi memory region postings.
+	 */
+	phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
+	spin_unlock_irq(&phba->hbalock);
+	return rpi_hdr;
+
+ err_free_coherent:
+	dma_free_coherent(&phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE,
+			  dmabuf->virt, dmabuf->phys);
+ err_free_dmabuf:
+	kfree(dmabuf);
+	return NULL;
+}
+
+/**
+ * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove all memory resources allocated
+ * to support rpis. This routine presumes the caller has released all
+ * rpis consumed by fabric or port logins and is prepared to have
+ * the header pages removed.
+ **/
+void
+lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
+{
+	struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;
+
+	list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
+				 &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+		list_del(&rpi_hdr->list);
+		dma_free_coherent(&phba->pcidev->dev, rpi_hdr->len,
+				  rpi_hdr->dmabuf->virt, rpi_hdr->dmabuf->phys);
+		kfree(rpi_hdr->dmabuf);
+		kfree(rpi_hdr);
+	}
+
+	phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+	memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask));
+}
+
+/**
+ * lpfc_hba_alloc - Allocate driver hba data structure for a device.
+ * @pdev: pointer to pci device data structure.
+ *
+ * This routine is invoked to allocate the driver hba data structure for an
+ * HBA device. If the allocation is successful, the phba reference to the
+ * PCI device data structure is set.
+ *
+ * Return codes
+ *      pointer to @phba - sucessful
+ *      NULL - error
+ **/
+static struct lpfc_hba *
+lpfc_hba_alloc(struct pci_dev *pdev)
+{
+	struct lpfc_hba *phba;
+
+	/* Allocate memory for HBA structure */
+	phba = kzalloc(sizeof(struct lpfc_hba), GFP_KERNEL);
+	if (!phba) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1417 Failed to allocate hba struct.\n");
+		return NULL;
+	}
+
+	/* Set reference to PCI device in HBA structure */
+	phba->pcidev = pdev;
+
+	/* Assign an unused board number */
+	phba->brd_no = lpfc_get_instance();
+	if (phba->brd_no < 0) {
+		kfree(phba);
+		return NULL;
+	}
+
+	return phba;
+}
+
+/**
+ * lpfc_hba_free - Free driver hba data structure with a device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver hba data structure with an
+ * HBA device.
+ **/
+static void
+lpfc_hba_free(struct lpfc_hba *phba)
+{
+	/* Release the driver assigned board number */
+	idr_remove(&lpfc_hba_index, phba->brd_no);
+
+	kfree(phba);
+	return;
+}
+
+/**
+ * lpfc_create_shost - Create hba physical port with associated scsi host.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create HBA physical port and associate a SCSI
+ * host with it.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      other values - error
+ **/
+static int
+lpfc_create_shost(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport;
+	struct Scsi_Host  *shost;
+
+	/* Initialize HBA FC structure */
+	phba->fc_edtov = FF_DEF_EDTOV;
+	phba->fc_ratov = FF_DEF_RATOV;
+	phba->fc_altov = FF_DEF_ALTOV;
+	phba->fc_arbtov = FF_DEF_ARBTOV;
+
+	vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
+	if (!vport)
+		return -ENODEV;
+
+	shost = lpfc_shost_from_vport(vport);
+	phba->pport = vport;
+	lpfc_debugfs_initialize(vport);
+	/* Put reference to SCSI host to driver's device private data */
+	pci_set_drvdata(phba->pcidev, shost);
+
+	return 0;
+}
+
+/**
+ * lpfc_destroy_shost - Destroy hba physical port with associated scsi host.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to destroy HBA physical port and the associated
+ * SCSI host.
+ **/
+static void
+lpfc_destroy_shost(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport = phba->pport;
+
+	/* Destroy physical port that associated with the SCSI host */
+	destroy_port(vport);
+
+	return;
+}
+
+/**
+ * lpfc_setup_bg - Setup Block guard structures and debug areas.
+ * @phba: pointer to lpfc hba data structure.
+ * @shost: the shost to be used to detect Block guard settings.
+ *
+ * This routine sets up the local Block guard protocol settings for @shost.
+ * This routine also allocates memory for debugging bg buffers.
+ **/
+static void
+lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
+{
+	int pagecnt = 10;
+	if (lpfc_prot_mask && lpfc_prot_guard) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"1478 Registering BlockGuard with the "
+				"SCSI layer\n");
+		scsi_host_set_prot(shost, lpfc_prot_mask);
+		scsi_host_set_guard(shost, lpfc_prot_guard);
+	}
+	if (!_dump_buf_data) {
+		while (pagecnt) {
+			spin_lock_init(&_dump_buf_lock);
+			_dump_buf_data =
+				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
+			if (_dump_buf_data) {
+				printk(KERN_ERR "BLKGRD allocated %d pages for "
+				       "_dump_buf_data at 0x%p\n",
+				       (1 << pagecnt), _dump_buf_data);
+				_dump_buf_data_order = pagecnt;
+				memset(_dump_buf_data, 0,
+				       ((1 << PAGE_SHIFT) << pagecnt));
+				break;
+			} else
+				--pagecnt;
+		}
+		if (!_dump_buf_data_order)
+			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+			       "memory for hexdump\n");
+	} else
+		printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
+		       "\n", _dump_buf_data);
+	if (!_dump_buf_dif) {
+		while (pagecnt) {
+			_dump_buf_dif =
+				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
+			if (_dump_buf_dif) {
+				printk(KERN_ERR "BLKGRD allocated %d pages for "
+				       "_dump_buf_dif at 0x%p\n",
+				       (1 << pagecnt), _dump_buf_dif);
+				_dump_buf_dif_order = pagecnt;
+				memset(_dump_buf_dif, 0,
+				       ((1 << PAGE_SHIFT) << pagecnt));
+				break;
+			} else
+				--pagecnt;
+		}
+		if (!_dump_buf_dif_order)
+			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+			       "memory for hexdump\n");
+	} else
+		printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
+		       _dump_buf_dif);
+}
+
+/**
+ * lpfc_post_init_setup - Perform necessary device post initialization setup.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to perform all the necessary post initialization
+ * setup for the device.
+ **/
+static void
+lpfc_post_init_setup(struct lpfc_hba *phba)
+{
+	struct Scsi_Host  *shost;
+	struct lpfc_adapter_event_header adapter_event;
+
+	/* Get the default values for Model Name and Description */
+	lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
+
+	/*
+	 * hba setup may have changed the hba_queue_depth so we need to
+	 * adjust the value of can_queue.
+	 */
+	shost = pci_get_drvdata(phba->pcidev);
+	shost->can_queue = phba->cfg_hba_queue_depth - 10;
+	if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
+		lpfc_setup_bg(phba, shost);
+
+	lpfc_host_attrib_init(shost);
+
+	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+		spin_lock_irq(shost->host_lock);
+		lpfc_poll_start_timer(phba);
+		spin_unlock_irq(shost->host_lock);
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0428 Perform SCSI scan\n");
+	/* Send board arrival event to upper layer */
+	adapter_event.event_type = FC_REG_ADAPTER_EVENT;
+	adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+				  sizeof(adapter_event),
+				  (char *) &adapter_event,
+				  LPFC_NL_VENDOR_ID);
+	return;
+}
+
+/**
+ * lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-3 interface spec.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	unsigned long bar0map_len, bar2map_len;
+	int i, hbq_count;
+	void *ptr;
+	int error = -ENODEV;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return error;
+	else
+		pdev = phba->pcidev;
+
+	/* Set the device DMA mask size */
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+			return error;
+
+	/* Get the bus address of Bar0 and Bar2 and the number of bytes
+	 * required by each mapping.
+	 */
+	phba->pci_bar0_map = pci_resource_start(pdev, 0);
+	bar0map_len = pci_resource_len(pdev, 0);
+
+	phba->pci_bar2_map = pci_resource_start(pdev, 2);
+	bar2map_len = pci_resource_len(pdev, 2);
+
+	/* Map HBA SLIM to a kernel virtual address. */
+	phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
+	if (!phba->slim_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLIM memory.\n");
+		goto out;
+	}
+
+	/* Map HBA Control Registers to a kernel virtual address. */
+	phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
+	if (!phba->ctrl_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for HBA control registers.\n");
+		goto out_iounmap_slim;
+	}
+
+	/* Allocate memory for SLI-2 structures */
+	phba->slim2p.virt = dma_alloc_coherent(&pdev->dev,
+					       SLI2_SLIM_SIZE,
+					       &phba->slim2p.phys,
+					       GFP_KERNEL);
+	if (!phba->slim2p.virt)
+		goto out_iounmap;
+
+	memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
+	phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
+	phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
+	phba->IOCBs = (phba->slim2p.virt +
+		       offsetof(struct lpfc_sli2_slim, IOCBs));
+
+	phba->hbqslimp.virt = dma_alloc_coherent(&pdev->dev,
+						 lpfc_sli_hbq_size(),
+						 &phba->hbqslimp.phys,
+						 GFP_KERNEL);
+	if (!phba->hbqslimp.virt)
+		goto out_free_slim;
+
+	hbq_count = lpfc_sli_hbq_count();
+	ptr = phba->hbqslimp.virt;
+	for (i = 0; i < hbq_count; ++i) {
+		phba->hbqs[i].hbq_virt = ptr;
+		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
+		ptr += (lpfc_hbq_defs[i]->entry_count *
+			sizeof(struct lpfc_hbq_entry));
+	}
+	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
+	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
+
+	memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
+
+	INIT_LIST_HEAD(&phba->rb_pend_list);
+
+	phba->MBslimaddr = phba->slim_memmap_p;
+	phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
+	phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
+	phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
+	phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+
+	return 0;
+
+out_free_slim:
+	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+			  phba->slim2p.virt, phba->slim2p.phys);
+out_iounmap:
+	iounmap(phba->ctrl_regs_memmap_p);
+out_iounmap_slim:
+	iounmap(phba->slim_memmap_p);
+out:
+	return error;
+}
+
+/**
+ * lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-3 interface spec.
+ **/
+static void
+lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return;
+	else
+		pdev = phba->pcidev;
+
+	/* Free coherent DMA memory allocated */
+	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
+			  phba->hbqslimp.virt, phba->hbqslimp.phys);
+	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+			  phba->slim2p.virt, phba->slim2p.phys);
+
+	/* I/O memory unmap */
+	iounmap(phba->ctrl_regs_memmap_p);
+	iounmap(phba->slim_memmap_p);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to wait for SLI4 device Power On Self Test (POST)
+ * done and check status.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+int
+lpfc_sli4_post_status_check(struct lpfc_hba *phba)
+{
+	struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
+	uint32_t onlnreg0, onlnreg1;
+	int i, port_error = -ENODEV;
+
+	if (!phba->sli4_hba.STAregaddr)
+		return -ENODEV;
+
+	/* With uncoverable error, log the error message and return error */
+	onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+	onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+	if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+		uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
+		uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
+		if (uerrlo_reg.word0 || uerrhi_reg.word0) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1422 HBA Unrecoverable error: "
+					"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+					"online0_reg=0x%x, online1_reg=0x%x\n",
+					uerrlo_reg.word0, uerrhi_reg.word0,
+					onlnreg0, onlnreg1);
+		}
+		return -ENODEV;
+	}
+
+	/* Wait up to 30 seconds for the SLI Port POST done and ready */
+	for (i = 0; i < 3000; i++) {
+		sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
+		/* Encounter fatal POST error, break out */
+		if (bf_get(lpfc_hst_state_perr, &sta_reg)) {
+			port_error = -ENODEV;
+			break;
+		}
+		if (LPFC_POST_STAGE_ARMFW_READY ==
+		    bf_get(lpfc_hst_state_port_status, &sta_reg)) {
+			port_error = 0;
+			break;
+		}
+		msleep(10);
+	}
+
+	if (port_error)
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"1408 Failure HBA POST Status: sta_reg=0x%x, "
+			"perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, xrom=x%x, "
+			"dl=x%x, pstatus=x%x\n", sta_reg.word0,
+			bf_get(lpfc_hst_state_perr, &sta_reg),
+			bf_get(lpfc_hst_state_sfi, &sta_reg),
+			bf_get(lpfc_hst_state_nip, &sta_reg),
+			bf_get(lpfc_hst_state_ipc, &sta_reg),
+			bf_get(lpfc_hst_state_xrom, &sta_reg),
+			bf_get(lpfc_hst_state_dl, &sta_reg),
+			bf_get(lpfc_hst_state_port_status, &sta_reg));
+
+	/* Log device information */
+	scratchpad.word0 =  readl(phba->sli4_hba.SCRATCHPADregaddr);
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
+			"FeatureL1=0x%x, FeatureL2=0x%x\n",
+			bf_get(lpfc_scratchpad_chiptype, &scratchpad),
+			bf_get(lpfc_scratchpad_slirev, &scratchpad),
+			bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
+			bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
+
+	return port_error;
+}
+
+/**
+ * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR0 PCI config space register
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
+{
+	phba->sli4_hba.UERRLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_UERR_STATUS_LO;
+	phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_UERR_STATUS_HI;
+	phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_ONLINE0;
+	phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_ONLINE1;
+	phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_SCRATCHPAD;
+}
+
+/**
+ * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR1 control status register (CSR)
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
+{
+
+	phba->sli4_hba.STAregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				    LPFC_HST_STATE;
+	phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				    LPFC_HST_ISR0;
+	phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				    LPFC_HST_IMR0;
+	phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				     LPFC_HST_ISCR0;
+	return;
+}
+
+/**
+ * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ * @vf: virtual function number
+ *
+ * This routine is invoked to set up SLI4 BAR2 doorbell register memory map
+ * based on the given viftual function number, @vf.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+static int
+lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
+{
+	if (vf > LPFC_VIR_FUNC_MAX)
+		return -ENODEV;
+
+	phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_RQ_DOORBELL);
+	phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_WQ_DOORBELL);
+	phba->sli4_hba.EQCQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_EQCQ_DOORBELL);
+	phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
+	phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX);
+	return 0;
+}
+
+/**
+ * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create the bootstrap mailbox
+ * region consistent with the SLI-4 interface spec.  This
+ * routine allocates all memory necessary to communicate
+ * mailbox commands to the port and sets up all alignment
+ * needs.  No locks are expected to be held when calling
+ * this routine.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
+{
+	uint32_t bmbx_size;
+	struct lpfc_dmabuf *dmabuf;
+	struct dma_address *dma_address;
+	uint32_t pa_addr;
+	uint64_t phys_addr;
+
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	/*
+	 * The bootstrap mailbox region is comprised of 2 parts
+	 * plus an alignment restriction of 16 bytes.
+	 */
+	bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+					  bmbx_size,
+					  &dmabuf->phys,
+					  GFP_KERNEL);
+	if (!dmabuf->virt) {
+		kfree(dmabuf);
+		return -ENOMEM;
+	}
+	memset(dmabuf->virt, 0, bmbx_size);
+
+	/*
+	 * Initialize the bootstrap mailbox pointers now so that the register
+	 * operations are simple later.  The mailbox dma address is required
+	 * to be 16-byte aligned.  Also align the virtual memory as each
+	 * maibox is copied into the bmbx mailbox region before issuing the
+	 * command to the port.
+	 */
+	phba->sli4_hba.bmbx.dmabuf = dmabuf;
+	phba->sli4_hba.bmbx.bmbx_size = bmbx_size;
+
+	phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt,
+					      LPFC_ALIGN_16_BYTE);
+	phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys,
+					      LPFC_ALIGN_16_BYTE);
+
+	/*
+	 * Set the high and low physical addresses now.  The SLI4 alignment
+	 * requirement is 16 bytes and the mailbox is posted to the port
+	 * as two 30-bit addresses.  The other data is a bit marking whether
+	 * the 30-bit address is the high or low address.
+	 * Upcast bmbx aphys to 64bits so shift instruction compiles
+	 * clean on 32 bit machines.
+	 */
+	dma_address = &phba->sli4_hba.bmbx.dma_address;
+	phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys;
+	pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff);
+	dma_address->addr_hi = (uint32_t) ((pa_addr << 2) |
+					   LPFC_BMBX_BIT1_ADDR_HI);
+
+	pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff);
+	dma_address->addr_lo = (uint32_t) ((pa_addr << 2) |
+					   LPFC_BMBX_BIT1_ADDR_LO);
+	return 0;
+}
+
+/**
+ * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to teardown the bootstrap mailbox
+ * region and release all host resources. This routine requires
+ * the caller to ensure all mailbox commands recovered, no
+ * additional mailbox comands are sent, and interrupts are disabled
+ * before calling this routine.
+ *
+ **/
+static void
+lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
+{
+	dma_free_coherent(&phba->pcidev->dev,
+			  phba->sli4_hba.bmbx.bmbx_size,
+			  phba->sli4_hba.bmbx.dmabuf->virt,
+			  phba->sli4_hba.bmbx.dmabuf->phys);
+
+	kfree(phba->sli4_hba.bmbx.dmabuf);
+	memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
+}
+
+/**
+ * lpfc_sli4_read_config - Get the config parameters.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to read the configuration parameters from the HBA.
+ * The configuration parameters are used to set the base and maximum values
+ * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
+ * allocation for the port.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_read_config(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *pmb;
+	struct lpfc_mbx_read_config *rd_config;
+	uint32_t rc = 0;
+
+	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2011 Unable to allocate memory for issuing "
+				"SLI_CONFIG_SPECIAL mailbox command\n");
+		return -ENOMEM;
+	}
+
+	lpfc_read_config(phba, pmb);
+
+	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2012 Mailbox failed , mbxCmd x%x "
+			"READ_CONFIG, mbxStatus x%x\n",
+			bf_get(lpfc_mqe_command, &pmb->u.mqe),
+			bf_get(lpfc_mqe_status, &pmb->u.mqe));
+		rc = -EIO;
+	} else {
+		rd_config = &pmb->u.mqe.un.rd_config;
+		phba->sli4_hba.max_cfg_param.max_xri =
+			bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+		phba->sli4_hba.max_cfg_param.xri_base =
+			bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_vpi =
+			bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.vpi_base =
+			bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_rpi =
+			bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.rpi_base =
+			bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_vfi =
+			bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.vfi_base =
+			bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_fcfi =
+			bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.fcfi_base =
+			bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_eq =
+			bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
+		phba->sli4_hba.max_cfg_param.max_rq =
+			bf_get(lpfc_mbx_rd_conf_rq_count, rd_config);
+		phba->sli4_hba.max_cfg_param.max_wq =
+			bf_get(lpfc_mbx_rd_conf_wq_count, rd_config);
+		phba->sli4_hba.max_cfg_param.max_cq =
+			bf_get(lpfc_mbx_rd_conf_cq_count, rd_config);
+		phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config);
+		phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
+		phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
+		phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
+		phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+		phba->max_vpi = phba->sli4_hba.max_cfg_param.max_vpi;
+		phba->max_vports = phba->max_vpi;
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"2003 cfg params XRI(B:%d M:%d), "
+				"VPI(B:%d M:%d) "
+				"VFI(B:%d M:%d) "
+				"RPI(B:%d M:%d) "
+				"FCFI(B:%d M:%d)\n",
+				phba->sli4_hba.max_cfg_param.xri_base,
+				phba->sli4_hba.max_cfg_param.max_xri,
+				phba->sli4_hba.max_cfg_param.vpi_base,
+				phba->sli4_hba.max_cfg_param.max_vpi,
+				phba->sli4_hba.max_cfg_param.vfi_base,
+				phba->sli4_hba.max_cfg_param.max_vfi,
+				phba->sli4_hba.max_cfg_param.rpi_base,
+				phba->sli4_hba.max_cfg_param.max_rpi,
+				phba->sli4_hba.max_cfg_param.fcfi_base,
+				phba->sli4_hba.max_cfg_param.max_fcfi);
+	}
+	mempool_free(pmb, phba->mbox_mem_pool);
+
+	/* Reset the DFT_HBA_Q_DEPTH to the max xri  */
+	if (phba->cfg_hba_queue_depth > (phba->sli4_hba.max_cfg_param.max_xri))
+		phba->cfg_hba_queue_depth =
+				phba->sli4_hba.max_cfg_param.max_xri;
+	return rc;
+}
+
+/**
+ * lpfc_dev_endian_order_setup - Notify the port of the host's endian order.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to setup the host-side endian order to the
+ * HBA consistent with the SLI-4 interface spec.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_setup_endian_order(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	uint32_t rc = 0;
+	uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
+				      HOST_ENDIAN_HIGH_WORD1};
+
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0492 Unable to allocate memory for issuing "
+				"SLI_CONFIG_SPECIAL mailbox command\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * The SLI4_CONFIG_SPECIAL mailbox command requires the first two
+	 * words to contain special data values and no other data.
+	 */
+	memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+	memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0493 SLI_CONFIG_SPECIAL mailbox failed with "
+				"status x%x\n",
+				rc);
+		rc = -EIO;
+	}
+
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_queue_create - Create all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
+ * operation. For each SLI4 queue type, the parameters such as queue entry
+ * count (queue depth) shall be taken from the module parameter. For now,
+ * we just use some constant number as place holder.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_queue_create(struct lpfc_hba *phba)
+{
+	struct lpfc_queue *qdesc;
+	int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+	int cfg_fcp_wq_count;
+	int cfg_fcp_eq_count;
+
+	/*
+	 * Sanity check for confiugred queue parameters against the run-time
+	 * device parameters
+	 */
+
+	/* Sanity check on FCP fast-path WQ parameters */
+	cfg_fcp_wq_count = phba->cfg_fcp_wq_count;
+	if (cfg_fcp_wq_count >
+	    (phba->sli4_hba.max_cfg_param.max_wq - LPFC_SP_WQN_DEF)) {
+		cfg_fcp_wq_count = phba->sli4_hba.max_cfg_param.max_wq -
+				   LPFC_SP_WQN_DEF;
+		if (cfg_fcp_wq_count < LPFC_FP_WQN_MIN) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2581 Not enough WQs (%d) from "
+					"the pci function for supporting "
+					"FCP WQs (%d)\n",
+					phba->sli4_hba.max_cfg_param.max_wq,
+					phba->cfg_fcp_wq_count);
+			goto out_error;
+		}
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2582 Not enough WQs (%d) from the pci "
+				"function for supporting the requested "
+				"FCP WQs (%d), the actual FCP WQs can "
+				"be supported: %d\n",
+				phba->sli4_hba.max_cfg_param.max_wq,
+				phba->cfg_fcp_wq_count, cfg_fcp_wq_count);
+	}
+	/* The actual number of FCP work queues adopted */
+	phba->cfg_fcp_wq_count = cfg_fcp_wq_count;
+
+	/* Sanity check on FCP fast-path EQ parameters */
+	cfg_fcp_eq_count = phba->cfg_fcp_eq_count;
+	if (cfg_fcp_eq_count >
+	    (phba->sli4_hba.max_cfg_param.max_eq - LPFC_SP_EQN_DEF)) {
+		cfg_fcp_eq_count = phba->sli4_hba.max_cfg_param.max_eq -
+				   LPFC_SP_EQN_DEF;
+		if (cfg_fcp_eq_count < LPFC_FP_EQN_MIN) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2574 Not enough EQs (%d) from the "
+					"pci function for supporting FCP "
+					"EQs (%d)\n",
+					phba->sli4_hba.max_cfg_param.max_eq,
+					phba->cfg_fcp_eq_count);
+			goto out_error;
+		}
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2575 Not enough EQs (%d) from the pci "
+				"function for supporting the requested "
+				"FCP EQs (%d), the actual FCP EQs can "
+				"be supported: %d\n",
+				phba->sli4_hba.max_cfg_param.max_eq,
+				phba->cfg_fcp_eq_count, cfg_fcp_eq_count);
+	}
+	/* It does not make sense to have more EQs than WQs */
+	if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2593 The number of FCP EQs (%d) is more "
+				"than the number of FCP WQs (%d), take "
+				"the number of FCP EQs same as than of "
+				"WQs (%d)\n", cfg_fcp_eq_count,
+				phba->cfg_fcp_wq_count,
+				phba->cfg_fcp_wq_count);
+		cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
+	}
+	/* The actual number of FCP event queues adopted */
+	phba->cfg_fcp_eq_count = cfg_fcp_eq_count;
+	/* The overall number of event queues used */
+	phba->sli4_hba.cfg_eqn = phba->cfg_fcp_eq_count + LPFC_SP_EQN_DEF;
+
+	/*
+	 * Create Event Queues (EQs)
+	 */
+
+	/* Get EQ depth from module parameter, fake the default for now */
+	phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
+	phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
+
+	/* Create slow path event queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+				      phba->sli4_hba.eq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0496 Failed allocate slow-path EQ\n");
+		goto out_error;
+	}
+	phba->sli4_hba.sp_eq = qdesc;
+
+	/* Create fast-path FCP Event Queue(s) */
+	phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
+			       phba->cfg_fcp_eq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fp_eq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2576 Failed allocate memory for fast-path "
+				"EQ record array\n");
+		goto out_free_sp_eq;
+	}
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+					      phba->sli4_hba.eq_ecount);
+		if (!qdesc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0497 Failed allocate fast-path EQ\n");
+			goto out_free_fp_eq;
+		}
+		phba->sli4_hba.fp_eq[fcp_eqidx] = qdesc;
+	}
+
+	/*
+	 * Create Complete Queues (CQs)
+	 */
+
+	/* Get CQ depth from module parameter, fake the default for now */
+	phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
+	phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
+
+	/* Create slow-path Mailbox Command Complete Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+				      phba->sli4_hba.cq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0500 Failed allocate slow-path mailbox CQ\n");
+		goto out_free_fp_eq;
+	}
+	phba->sli4_hba.mbx_cq = qdesc;
+
+	/* Create slow-path ELS Complete Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+				      phba->sli4_hba.cq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0501 Failed allocate slow-path ELS CQ\n");
+		goto out_free_mbx_cq;
+	}
+	phba->sli4_hba.els_cq = qdesc;
+
+	/* Create slow-path Unsolicited Receive Complete Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+				      phba->sli4_hba.cq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0502 Failed allocate slow-path USOL RX CQ\n");
+		goto out_free_els_cq;
+	}
+	phba->sli4_hba.rxq_cq = qdesc;
+
+	/* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
+	phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
+				phba->cfg_fcp_eq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fcp_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2577 Failed allocate memory for fast-path "
+				"CQ record array\n");
+		goto out_free_rxq_cq;
+	}
+	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+					      phba->sli4_hba.cq_ecount);
+		if (!qdesc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0499 Failed allocate fast-path FCP "
+					"CQ (%d)\n", fcp_cqidx);
+			goto out_free_fcp_cq;
+		}
+		phba->sli4_hba.fcp_cq[fcp_cqidx] = qdesc;
+	}
+
+	/* Create Mailbox Command Queue */
+	phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
+	phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT;
+
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.mq_esize,
+				      phba->sli4_hba.mq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0505 Failed allocate slow-path MQ\n");
+		goto out_free_fcp_cq;
+	}
+	phba->sli4_hba.mbx_wq = qdesc;
+
+	/*
+	 * Create all the Work Queues (WQs)
+	 */
+	phba->sli4_hba.wq_esize = LPFC_WQE_SIZE;
+	phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT;
+
+	/* Create slow-path ELS Work Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+				      phba->sli4_hba.wq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0504 Failed allocate slow-path ELS WQ\n");
+		goto out_free_mbx_wq;
+	}
+	phba->sli4_hba.els_wq = qdesc;
+
+	/* Create fast-path FCP Work Queue(s) */
+	phba->sli4_hba.fcp_wq = kzalloc((sizeof(struct lpfc_queue *) *
+				phba->cfg_fcp_wq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fcp_wq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2578 Failed allocate memory for fast-path "
+				"WQ record array\n");
+		goto out_free_els_wq;
+	}
+	for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+					      phba->sli4_hba.wq_ecount);
+		if (!qdesc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0503 Failed allocate fast-path FCP "
+					"WQ (%d)\n", fcp_wqidx);
+			goto out_free_fcp_wq;
+		}
+		phba->sli4_hba.fcp_wq[fcp_wqidx] = qdesc;
+	}
+
+	/*
+	 * Create Receive Queue (RQ)
+	 */
+	phba->sli4_hba.rq_esize = LPFC_RQE_SIZE;
+	phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT;
+
+	/* Create Receive Queue for header */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+				      phba->sli4_hba.rq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0506 Failed allocate receive HRQ\n");
+		goto out_free_fcp_wq;
+	}
+	phba->sli4_hba.hdr_rq = qdesc;
+
+	/* Create Receive Queue for data */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+				      phba->sli4_hba.rq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0507 Failed allocate receive DRQ\n");
+		goto out_free_hdr_rq;
+	}
+	phba->sli4_hba.dat_rq = qdesc;
+
+	return 0;
+
+out_free_hdr_rq:
+	lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+	phba->sli4_hba.hdr_rq = NULL;
+out_free_fcp_wq:
+	for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--) {
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_wqidx]);
+		phba->sli4_hba.fcp_wq[fcp_wqidx] = NULL;
+	}
+	kfree(phba->sli4_hba.fcp_wq);
+out_free_els_wq:
+	lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+	phba->sli4_hba.els_wq = NULL;
+out_free_mbx_wq:
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+	phba->sli4_hba.mbx_wq = NULL;
+out_free_fcp_cq:
+	for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--) {
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_cqidx]);
+		phba->sli4_hba.fcp_cq[fcp_cqidx] = NULL;
+	}
+	kfree(phba->sli4_hba.fcp_cq);
+out_free_rxq_cq:
+	lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+	phba->sli4_hba.rxq_cq = NULL;
+out_free_els_cq:
+	lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+	phba->sli4_hba.els_cq = NULL;
+out_free_mbx_cq:
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+	phba->sli4_hba.mbx_cq = NULL;
+out_free_fp_eq:
+	for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--) {
+		lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_eqidx]);
+		phba->sli4_hba.fp_eq[fcp_eqidx] = NULL;
+	}
+	kfree(phba->sli4_hba.fp_eq);
+out_free_sp_eq:
+	lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+	phba->sli4_hba.sp_eq = NULL;
+out_error:
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static void
+lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
+{
+	int fcp_qidx;
+
+	/* Release mailbox command work queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+	phba->sli4_hba.mbx_wq = NULL;
+
+	/* Release ELS work queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+	phba->sli4_hba.els_wq = NULL;
+
+	/* Release FCP work queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_qidx]);
+	kfree(phba->sli4_hba.fcp_wq);
+	phba->sli4_hba.fcp_wq = NULL;
+
+	/* Release unsolicited receive queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+	phba->sli4_hba.hdr_rq = NULL;
+	lpfc_sli4_queue_free(phba->sli4_hba.dat_rq);
+	phba->sli4_hba.dat_rq = NULL;
+
+	/* Release unsolicited receive complete queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+	phba->sli4_hba.rxq_cq = NULL;
+
+	/* Release ELS complete queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+	phba->sli4_hba.els_cq = NULL;
+
+	/* Release mailbox command complete queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+	phba->sli4_hba.mbx_cq = NULL;
+
+	/* Release FCP response complete queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]);
+	kfree(phba->sli4_hba.fcp_cq);
+	phba->sli4_hba.fcp_cq = NULL;
+
+	/* Release fast-path event queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
+	kfree(phba->sli4_hba.fp_eq);
+	phba->sli4_hba.fp_eq = NULL;
+
+	/* Release slow-path event queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+	phba->sli4_hba.sp_eq = NULL;
+
+	return;
+}
+
+/**
+ * lpfc_sli4_queue_setup - Set up all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up all the SLI4 queues for the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_queue_setup(struct lpfc_hba *phba)
+{
+	int rc = -ENOMEM;
+	int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+	int fcp_cq_index = 0;
+
+	/*
+	 * Set up Event Queues (EQs)
+	 */
+
+	/* Set up slow-path event queue */
+	if (!phba->sli4_hba.sp_eq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0520 Slow-path EQ not allocated\n");
+		goto out_error;
+	}
+	rc = lpfc_eq_create(phba, phba->sli4_hba.sp_eq,
+			    LPFC_SP_DEF_IMAX);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0521 Failed setup of slow-path EQ: "
+				"rc = 0x%x\n", rc);
+		goto out_error;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2583 Slow-path EQ setup: queue-id=%d\n",
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up fast-path event queue */
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+		if (!phba->sli4_hba.fp_eq[fcp_eqidx]) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0522 Fast-path EQ (%d) not "
+					"allocated\n", fcp_eqidx);
+			goto out_destroy_fp_eq;
+		}
+		rc = lpfc_eq_create(phba, phba->sli4_hba.fp_eq[fcp_eqidx],
+				    phba->cfg_fcp_imax);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0523 Failed setup of fast-path EQ "
+					"(%d), rc = 0x%x\n", fcp_eqidx, rc);
+			goto out_destroy_fp_eq;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2584 Fast-path EQ setup: "
+				"queue[%d]-id=%d\n", fcp_eqidx,
+				phba->sli4_hba.fp_eq[fcp_eqidx]->queue_id);
+	}
+
+	/*
+	 * Set up Complete Queues (CQs)
+	 */
+
+	/* Set up slow-path MBOX Complete Queue as the first CQ */
+	if (!phba->sli4_hba.mbx_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0528 Mailbox CQ not allocated\n");
+		goto out_destroy_fp_eq;
+	}
+	rc = lpfc_cq_create(phba, phba->sli4_hba.mbx_cq, phba->sli4_hba.sp_eq,
+			    LPFC_MCQ, LPFC_MBOX);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0529 Failed setup of slow-path mailbox CQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_fp_eq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2585 MBX CQ setup: cq-id=%d, parent eq-id=%d\n",
+			phba->sli4_hba.mbx_cq->queue_id,
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up slow-path ELS Complete Queue */
+	if (!phba->sli4_hba.els_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0530 ELS CQ not allocated\n");
+		goto out_destroy_mbx_cq;
+	}
+	rc = lpfc_cq_create(phba, phba->sli4_hba.els_cq, phba->sli4_hba.sp_eq,
+			    LPFC_WCQ, LPFC_ELS);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0531 Failed setup of slow-path ELS CQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_mbx_cq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2586 ELS CQ setup: cq-id=%d, parent eq-id=%d\n",
+			phba->sli4_hba.els_cq->queue_id,
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up slow-path Unsolicited Receive Complete Queue */
+	if (!phba->sli4_hba.rxq_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0532 USOL RX CQ not allocated\n");
+		goto out_destroy_els_cq;
+	}
+	rc = lpfc_cq_create(phba, phba->sli4_hba.rxq_cq, phba->sli4_hba.sp_eq,
+			    LPFC_RCQ, LPFC_USOL);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0533 Failed setup of slow-path USOL RX CQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_els_cq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2587 USL CQ setup: cq-id=%d, parent eq-id=%d\n",
+			phba->sli4_hba.rxq_cq->queue_id,
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up fast-path FCP Response Complete Queue */
+	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+		if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0526 Fast-path FCP CQ (%d) not "
+					"allocated\n", fcp_cqidx);
+			goto out_destroy_fcp_cq;
+		}
+		rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx],
+				    phba->sli4_hba.fp_eq[fcp_cqidx],
+				    LPFC_WCQ, LPFC_FCP);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0527 Failed setup of fast-path FCP "
+					"CQ (%d), rc = 0x%x\n", fcp_cqidx, rc);
+			goto out_destroy_fcp_cq;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2588 FCP CQ setup: cq[%d]-id=%d, "
+				"parent eq[%d]-id=%d\n",
+				fcp_cqidx,
+				phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id,
+				fcp_cqidx,
+				phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id);
+	}
+
+	/*
+	 * Set up all the Work Queues (WQs)
+	 */
+
+	/* Set up Mailbox Command Queue */
+	if (!phba->sli4_hba.mbx_wq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0538 Slow-path MQ not allocated\n");
+		goto out_destroy_fcp_cq;
+	}
+	rc = lpfc_mq_create(phba, phba->sli4_hba.mbx_wq,
+			    phba->sli4_hba.mbx_cq, LPFC_MBOX);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0539 Failed setup of slow-path MQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_fcp_cq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
+			phba->sli4_hba.mbx_wq->queue_id,
+			phba->sli4_hba.mbx_cq->queue_id);
+
+	/* Set up slow-path ELS Work Queue */
+	if (!phba->sli4_hba.els_wq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0536 Slow-path ELS WQ not allocated\n");
+		goto out_destroy_mbx_wq;
+	}
+	rc = lpfc_wq_create(phba, phba->sli4_hba.els_wq,
+			    phba->sli4_hba.els_cq, LPFC_ELS);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0537 Failed setup of slow-path ELS WQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_mbx_wq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
+			phba->sli4_hba.els_wq->queue_id,
+			phba->sli4_hba.els_cq->queue_id);
+
+	/* Set up fast-path FCP Work Queue */
+	for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+		if (!phba->sli4_hba.fcp_wq[fcp_wqidx]) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0534 Fast-path FCP WQ (%d) not "
+					"allocated\n", fcp_wqidx);
+			goto out_destroy_fcp_wq;
+		}
+		rc = lpfc_wq_create(phba, phba->sli4_hba.fcp_wq[fcp_wqidx],
+				    phba->sli4_hba.fcp_cq[fcp_cq_index],
+				    LPFC_FCP);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0535 Failed setup of fast-path FCP "
+					"WQ (%d), rc = 0x%x\n", fcp_wqidx, rc);
+			goto out_destroy_fcp_wq;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2591 FCP WQ setup: wq[%d]-id=%d, "
+				"parent cq[%d]-id=%d\n",
+				fcp_wqidx,
+				phba->sli4_hba.fcp_wq[fcp_wqidx]->queue_id,
+				fcp_cq_index,
+				phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id);
+		/* Round robin FCP Work Queue's Completion Queue assignment */
+		fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count);
+	}
+
+	/*
+	 * Create Receive Queue (RQ)
+	 */
+	if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0540 Receive Queue not allocated\n");
+		goto out_destroy_fcp_wq;
+	}
+	rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+			    phba->sli4_hba.rxq_cq, LPFC_USOL);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0541 Failed setup of Receive Queue: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_fcp_wq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
+			"parent cq-id=%d\n",
+			phba->sli4_hba.hdr_rq->queue_id,
+			phba->sli4_hba.dat_rq->queue_id,
+			phba->sli4_hba.rxq_cq->queue_id);
+	return 0;
+
+out_destroy_fcp_wq:
+	for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--)
+		lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_wqidx]);
+	lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+out_destroy_mbx_wq:
+	lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+out_destroy_fcp_cq:
+	for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--)
+		lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_cqidx]);
+	lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+out_destroy_els_cq:
+	lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+out_destroy_mbx_cq:
+	lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+out_destroy_fp_eq:
+	for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--)
+		lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_eqidx]);
+	lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+out_error:
+	return rc;
+}
+
+/**
+ * lpfc_sli4_queue_unset - Unset all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+void
+lpfc_sli4_queue_unset(struct lpfc_hba *phba)
+{
+	int fcp_qidx;
+
+	/* Unset mailbox command work queue */
+	lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+	/* Unset ELS work queue */
+	lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+	/* Unset unsolicited receive queue */
+	lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq);
+	/* Unset FCP work queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+		lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_qidx]);
+	/* Unset mailbox command complete queue */
+	lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+	/* Unset ELS complete queue */
+	lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+	/* Unset unsolicited receive complete queue */
+	lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+	/* Unset FCP response complete queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
+	/* Unset fast-path event queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_qidx]);
+	/* Unset slow-path event queue */
+	lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and set up a pool of completion queue
+ * events. The body of the completion queue event is a completion queue entry
+ * CQE. For now, this pool is used for the interrupt service routine to queue
+ * the following HBA completion queue events for the worker thread to process:
+ *   - Mailbox asynchronous events
+ *   - Receive queue completion unsolicited events
+ * Later, this can be used for all the slow-path events.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      -ENOMEM - No availble memory
+ **/
+static int
+lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+	int i;
+
+	for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) {
+		cq_event = kmalloc(sizeof(struct lpfc_cq_event), GFP_KERNEL);
+		if (!cq_event)
+			goto out_pool_create_fail;
+		list_add_tail(&cq_event->list,
+			      &phba->sli4_hba.sp_cqe_event_pool);
+	}
+	return 0;
+
+out_pool_create_fail:
+	lpfc_sli4_cq_event_pool_destroy(phba);
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the pool of completion queue events at
+ * driver unload time. Note that, it is the responsibility of the driver
+ * cleanup routine to free all the outstanding completion-queue events
+ * allocated from this pool back into the pool before invoking this routine
+ * to destroy the pool.
+ **/
+static void
+lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event, *next_cq_event;
+
+	list_for_each_entry_safe(cq_event, next_cq_event,
+				 &phba->sli4_hba.sp_cqe_event_pool, list) {
+		list_del(&cq_event->list);
+		kfree(cq_event);
+	}
+}
+
+/**
+ * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock free version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ *         NULL otherwise.
+ **/
+struct lpfc_cq_event *
+__lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event = NULL;
+
+	list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event,
+			 struct lpfc_cq_event, list);
+	return cq_event;
+}
+
+/**
+ * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ *         NULL otherwise.
+ **/
+struct lpfc_cq_event *
+lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	cq_event = __lpfc_sli4_cq_event_alloc(phba);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return cq_event;
+}
+
+/**
+ * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock free version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+__lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+			     struct lpfc_cq_event *cq_event)
+{
+	list_add_tail(&cq_event->list, &phba->sli4_hba.sp_cqe_event_pool);
+}
+
+/**
+ * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+			   struct lpfc_cq_event *cq_event)
+{
+	unsigned long iflags;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	__lpfc_sli4_cq_event_release(phba, cq_event);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+}
+
+/**
+ * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to free all the pending completion-queue events to the
+ * back into the free pool for device reset.
+ **/
+static void
+lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
+{
+	LIST_HEAD(cqelist);
+	struct lpfc_cq_event *cqe;
+	unsigned long iflags;
+
+	/* Retrieve all the pending WCQEs from pending WCQE lists */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	/* Pending FCP XRI abort events */
+	list_splice_init(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+			 &cqelist);
+	/* Pending ELS XRI abort events */
+	list_splice_init(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+			 &cqelist);
+	/* Pending asynnc events */
+	list_splice_init(&phba->sli4_hba.sp_asynce_work_queue,
+			 &cqelist);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	while (!list_empty(&cqelist)) {
+		list_remove_head(&cqelist, cqe, struct lpfc_cq_event, list);
+		lpfc_sli4_cq_event_release(phba, cqe);
+	}
+}
+
+/**
+ * lpfc_pci_function_reset - Reset pci function.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to request a PCI function reset. It will destroys
+ * all resources assigned to the PCI function which originates this request.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_pci_function_reset(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	uint32_t rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0494 Unable to allocate memory for issuing "
+				"SLI_FUNCTION_RESET mailbox command\n");
+		return -ENOMEM;
+	}
+
+	/* Set up PCI function reset SLI4_CONFIG mailbox-ioctl command */
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
+			 LPFC_SLI4_MBX_EMBED);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0495 SLI_FUNCTION_RESET mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_send_nop_mbox_cmds - Send sli-4 nop mailbox commands
+ * @phba: pointer to lpfc hba data structure.
+ * @cnt: number of nop mailbox commands to send.
+ *
+ * This routine is invoked to send a number @cnt of NOP mailbox command and
+ * wait for each command to complete.
+ *
+ * Return: the number of NOP mailbox command completed.
+ **/
+static int
+lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
+{
+	LPFC_MBOXQ_t *mboxq;
+	int length, cmdsent;
+	uint32_t mbox_tmo;
+	uint32_t rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (cnt == 0) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2518 Requested to send 0 NOP mailbox cmd\n");
+		return cnt;
+	}
+
+	mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2519 Unable to allocate memory for issuing "
+				"NOP mailbox command\n");
+		return 0;
+	}
+
+	/* Set up NOP SLI4_CONFIG mailbox-ioctl command */
+	length = (sizeof(struct lpfc_mbx_nop) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);
+
+	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+	for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
+		if (!phba->sli4_hba.intr_enable)
+			rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+		else
+			rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+		if (rc == MBX_TIMEOUT)
+			break;
+		/* Check return status */
+		shdr = (union lpfc_sli4_cfg_shdr *)
+			&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+		shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+		shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+					 &shdr->response);
+		if (shdr_status || shdr_add_status || rc) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+					"2520 NOP mailbox command failed "
+					"status x%x add_status x%x mbx "
+					"status x%x\n", shdr_status,
+					shdr_add_status, rc);
+			break;
+		}
+	}
+
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+
+	return cmdsent;
+}
+
+/**
+ * lpfc_sli4_fcfi_unreg - Unregister fcfi to device
+ * @phba: pointer to lpfc hba data structure.
+ * @fcfi: fcf index.
+ *
+ * This routine is invoked to unregister a FCFI from device.
+ **/
+void
+lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
+{
+	LPFC_MBOXQ_t *mbox;
+	uint32_t mbox_tmo;
+	int rc;
+	unsigned long flags;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+
+	if (!mbox)
+		return;
+
+	lpfc_unreg_fcfi(mbox, fcfi);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	if (rc != MBX_SUCCESS)
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2517 Unregister FCFI command failed "
+				"status %d, mbxStatus x%x\n", rc,
+				bf_get(lpfc_mqe_status, &mbox->u.mqe));
+	else {
+		spin_lock_irqsave(&phba->hbalock, flags);
+		/* Mark the FCFI is no longer registered */
+		phba->fcf.fcf_flag &=
+			~(FCF_AVAILABLE | FCF_REGISTERED | FCF_DISCOVERED);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+	}
+}
+
+/**
+ * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-4 interface spec.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	unsigned long bar0map_len, bar1map_len, bar2map_len;
+	int error = -ENODEV;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return error;
+	else
+		pdev = phba->pcidev;
+
+	/* Set the device DMA mask size */
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+			return error;
+
+	/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
+	 * number of bytes required by each mapping. They are actually
+	 * mapping to the PCI BAR regions 1, 2, and 4 by the SLI4 device.
+	 */
+	phba->pci_bar0_map = pci_resource_start(pdev, LPFC_SLI4_BAR0);
+	bar0map_len = pci_resource_len(pdev, LPFC_SLI4_BAR0);
+
+	phba->pci_bar1_map = pci_resource_start(pdev, LPFC_SLI4_BAR1);
+	bar1map_len = pci_resource_len(pdev, LPFC_SLI4_BAR1);
+
+	phba->pci_bar2_map = pci_resource_start(pdev, LPFC_SLI4_BAR2);
+	bar2map_len = pci_resource_len(pdev, LPFC_SLI4_BAR2);
+
+	/* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
+	phba->sli4_hba.conf_regs_memmap_p =
+				ioremap(phba->pci_bar0_map, bar0map_len);
+	if (!phba->sli4_hba.conf_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLI4 PCI config registers.\n");
+		goto out;
+	}
+
+	/* Map SLI4 HBA Control Register base to a kernel virtual address. */
+	phba->sli4_hba.ctrl_regs_memmap_p =
+				ioremap(phba->pci_bar1_map, bar1map_len);
+	if (!phba->sli4_hba.ctrl_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLI4 HBA control registers.\n");
+		goto out_iounmap_conf;
+	}
+
+	/* Map SLI4 HBA Doorbell Register base to a kernel virtual address. */
+	phba->sli4_hba.drbl_regs_memmap_p =
+				ioremap(phba->pci_bar2_map, bar2map_len);
+	if (!phba->sli4_hba.drbl_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLI4 HBA doorbell registers.\n");
+		goto out_iounmap_ctrl;
+	}
+
+	/* Set up BAR0 PCI config space register memory map */
+	lpfc_sli4_bar0_register_memmap(phba);
+
+	/* Set up BAR1 register memory map */
+	lpfc_sli4_bar1_register_memmap(phba);
+
+	/* Set up BAR2 register memory map */
+	error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
+	if (error)
+		goto out_iounmap_all;
+
+	return 0;
+
+out_iounmap_all:
+	iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+out_iounmap_ctrl:
+	iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+out_iounmap_conf:
+	iounmap(phba->sli4_hba.conf_regs_memmap_p);
+out:
+	return error;
+}
+
+/**
+ * lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return;
+	else
+		pdev = phba->pcidev;
+
+	/* Free coherent DMA memory allocated */
+
+	/* Unmap I/O memory space */
+	iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+	iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+	iounmap(phba->sli4_hba.conf_regs_memmap_p);
+
+	return;
+}
+
+/**
+ * lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-3 interface specs. The kernel function pci_enable_msix() is
+ * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
+ * invoked, enables either all or nothing, depending on the current
+ * availability of PCI vector resources. The device driver is responsible
+ * for calling the individual request_irq() to register each MSI-X vector
+ * with a interrupt handler, which is done in this function. Note that
  * later when device is unloading, the driver should always call free_irq()
  * on all MSI-X vectors it has done request_irq() on before calling
  * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
@@ -2333,7 +6029,7 @@
  *   other values - error
  **/
 static int
-lpfc_enable_msix(struct lpfc_hba *phba)
+lpfc_sli_enable_msix(struct lpfc_hba *phba)
 {
 	int rc, i;
 	LPFC_MBOXQ_t *pmb;
@@ -2349,20 +6045,21 @@
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 				"0420 PCI enable MSI-X failed (%d)\n", rc);
 		goto msi_fail_out;
-	} else
-		for (i = 0; i < LPFC_MSIX_VECTORS; i++)
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"0477 MSI-X entry[%d]: vector=x%x "
-					"message=%d\n", i,
-					phba->msix_entries[i].vector,
-					phba->msix_entries[i].entry);
+	}
+	for (i = 0; i < LPFC_MSIX_VECTORS; i++)
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0477 MSI-X entry[%d]: vector=x%x "
+				"message=%d\n", i,
+				phba->msix_entries[i].vector,
+				phba->msix_entries[i].entry);
 	/*
 	 * Assign MSI-X vectors to interrupt handlers
 	 */
 
 	/* vector-0 is associated to slow-path handler */
-	rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler,
-			 IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba);
+	rc = request_irq(phba->msix_entries[0].vector,
+			 &lpfc_sli_sp_intr_handler, IRQF_SHARED,
+			 LPFC_SP_DRIVER_HANDLER_NAME, phba);
 	if (rc) {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
 				"0421 MSI-X slow-path request_irq failed "
@@ -2371,8 +6068,9 @@
 	}
 
 	/* vector-1 is associated to fast-path handler */
-	rc = request_irq(phba->msix_entries[1].vector, &lpfc_fp_intr_handler,
-			 IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba);
+	rc = request_irq(phba->msix_entries[1].vector,
+			 &lpfc_sli_fp_intr_handler, IRQF_SHARED,
+			 LPFC_FP_DRIVER_HANDLER_NAME, phba);
 
 	if (rc) {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -2401,7 +6099,7 @@
 		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
 				"0351 Config MSI mailbox command failed, "
 				"mbxCmd x%x, mbxStatus x%x\n",
-				pmb->mb.mbxCommand, pmb->mb.mbxStatus);
+				pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus);
 		goto mbx_fail_out;
 	}
 
@@ -2428,14 +6126,14 @@
 }
 
 /**
- * lpfc_disable_msix - Disable MSI-X interrupt mode
+ * lpfc_sli_disable_msix - Disable MSI-X interrupt mode on SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to release the MSI-X vectors and then disable the
- * MSI-X interrupt mode.
+ * MSI-X interrupt mode to device with SLI-3 interface spec.
  **/
 static void
-lpfc_disable_msix(struct lpfc_hba *phba)
+lpfc_sli_disable_msix(struct lpfc_hba *phba)
 {
 	int i;
 
@@ -2444,23 +6142,26 @@
 		free_irq(phba->msix_entries[i].vector, phba);
 	/* Disable MSI-X */
 	pci_disable_msix(phba->pcidev);
+
+	return;
 }
 
 /**
- * lpfc_enable_msi - Enable MSI interrupt mode
+ * lpfc_sli_enable_msi - Enable MSI interrupt mode on SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to enable the MSI interrupt mode. The kernel
- * function pci_enable_msi() is called to enable the MSI vector. The
- * device driver is responsible for calling the request_irq() to register
- * MSI vector with a interrupt the handler, which is done in this function.
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-3 interface spec. The kernel function pci_enable_msi() is called to
+ * enable the MSI vector. The device driver is responsible for calling the
+ * request_irq() to register MSI vector with a interrupt the handler, which
+ * is done in this function.
  *
  * Return codes
  * 	0 - sucessful
  * 	other values - error
  */
 static int
-lpfc_enable_msi(struct lpfc_hba *phba)
+lpfc_sli_enable_msi(struct lpfc_hba *phba)
 {
 	int rc;
 
@@ -2474,7 +6175,7 @@
 		return rc;
 	}
 
-	rc = request_irq(phba->pcidev->irq, lpfc_intr_handler,
+	rc = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
 			 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
 	if (rc) {
 		pci_disable_msi(phba->pcidev);
@@ -2485,17 +6186,17 @@
 }
 
 /**
- * lpfc_disable_msi - Disable MSI interrupt mode
+ * lpfc_sli_disable_msi - Disable MSI interrupt mode to SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to disable the MSI interrupt mode. The driver
- * calls free_irq() on MSI vector it has done request_irq() on before
- * calling pci_disable_msi(). Failure to do so results in a BUG_ON() and
- * a device will be left with MSI enabled and leaks its vector.
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-3 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
  */
-
 static void
-lpfc_disable_msi(struct lpfc_hba *phba)
+lpfc_sli_disable_msi(struct lpfc_hba *phba)
 {
 	free_irq(phba->pcidev->irq, phba);
 	pci_disable_msi(phba->pcidev);
@@ -2503,80 +6204,33 @@
 }
 
 /**
- * lpfc_log_intr_mode - Log the active interrupt mode
- * @phba: pointer to lpfc hba data structure.
- * @intr_mode: active interrupt mode adopted.
- *
- * This routine it invoked to log the currently used active interrupt mode
- * to the device.
- */
-static void
-lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
-{
-	switch (intr_mode) {
-	case 0:
-		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0470 Enable INTx interrupt mode.\n");
-		break;
-	case 1:
-		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0481 Enabled MSI interrupt mode.\n");
-		break;
-	case 2:
-		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0480 Enabled MSI-X interrupt mode.\n");
-		break;
-	default:
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"0482 Illegal interrupt mode.\n");
-		break;
-	}
-	return;
-}
-
-static void
-lpfc_stop_port(struct lpfc_hba *phba)
-{
-	/* Clear all interrupt enable conditions */
-	writel(0, phba->HCregaddr);
-	readl(phba->HCregaddr); /* flush */
-	/* Clear all pending interrupts */
-	writel(0xffffffff, phba->HAregaddr);
-	readl(phba->HAregaddr); /* flush */
-
-	/* Reset some HBA SLI setup states */
-	lpfc_stop_phba_timers(phba);
-	phba->pport->work_port_events = 0;
-
-	return;
-}
-
-/**
- * lpfc_enable_intr - Enable device interrupt
+ * lpfc_sli_enable_intr - Enable device interrupt to SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to enable device interrupt and associate driver's
- * interrupt handler(s) to interrupt vector(s). Depends on the interrupt
- * mode configured to the driver, the driver will try to fallback from the
- * configured interrupt mode to an interrupt mode which is supported by the
- * platform, kernel, and device in the order of: MSI-X -> MSI -> IRQ.
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-3 interface
+ * spec. Depends on the interrupt mode configured to the driver, the driver
+ * will try to fallback from the configured interrupt mode to an interrupt
+ * mode which is supported by the platform, kernel, and device in the order
+ * of:
+ * MSI-X -> MSI -> IRQ.
  *
  * Return codes
  *   0 - sucessful
  *   other values - error
  **/
 static uint32_t
-lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
 {
 	uint32_t intr_mode = LPFC_INTR_ERROR;
 	int retval;
 
 	if (cfg_mode == 2) {
 		/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
-		retval = lpfc_sli_config_port(phba, 3);
+		retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
 		if (!retval) {
 			/* Now, try to enable MSI-X interrupt mode */
-			retval = lpfc_enable_msix(phba);
+			retval = lpfc_sli_enable_msix(phba);
 			if (!retval) {
 				/* Indicate initialization to MSI-X mode */
 				phba->intr_type = MSIX;
@@ -2587,7 +6241,7 @@
 
 	/* Fallback to MSI if MSI-X initialization failed */
 	if (cfg_mode >= 1 && phba->intr_type == NONE) {
-		retval = lpfc_enable_msi(phba);
+		retval = lpfc_sli_enable_msi(phba);
 		if (!retval) {
 			/* Indicate initialization to MSI mode */
 			phba->intr_type = MSI;
@@ -2597,7 +6251,7 @@
 
 	/* Fallback to INTx if both MSI-X/MSI initalization failed */
 	if (phba->intr_type == NONE) {
-		retval = request_irq(phba->pcidev->irq, lpfc_intr_handler,
+		retval = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
 				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
 		if (!retval) {
 			/* Indicate initialization to INTx mode */
@@ -2609,22 +6263,22 @@
 }
 
 /**
- * lpfc_disable_intr - Disable device interrupt
+ * lpfc_sli_disable_intr - Disable device interrupt to SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to disable device interrupt and disassociate the
- * driver's interrupt handler(s) from interrupt vector(s). Depending on the
- * interrupt mode, the driver will release the interrupt vector(s) for the
- * message signaled interrupt.
+ * driver's interrupt handler(s) from interrupt vector(s) to device with
+ * SLI-3 interface spec. Depending on the interrupt mode, the driver will
+ * release the interrupt vector(s) for the message signaled interrupt.
  **/
 static void
-lpfc_disable_intr(struct lpfc_hba *phba)
+lpfc_sli_disable_intr(struct lpfc_hba *phba)
 {
 	/* Disable the currently initialized interrupt mode */
 	if (phba->intr_type == MSIX)
-		lpfc_disable_msix(phba);
+		lpfc_sli_disable_msix(phba);
 	else if (phba->intr_type == MSI)
-		lpfc_disable_msi(phba);
+		lpfc_sli_disable_msi(phba);
 	else if (phba->intr_type == INTx)
 		free_irq(phba->pcidev->irq, phba);
 
@@ -2636,263 +6290,503 @@
 }
 
 /**
- * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem
- * @pdev: pointer to PCI device
- * @pid: pointer to PCI device identifier
+ * lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
  *
- * This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is presented in PCI bus, the kernel PCI subsystem looks at
- * PCI device-specific information of the device and driver to see if the
- * driver state that it can support this kind of device. If the match is
- * successful, the driver core invokes this routine. If this routine
- * determines it can claim the HBA, it does all the initialization that it
- * needs to do to handle the HBA properly.
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
+ * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
+ * enables either all or nothing, depending on the current availability of
+ * PCI vector resources. The device driver is responsible for calling the
+ * individual request_irq() to register each MSI-X vector with a interrupt
+ * handler, which is done in this function. Note that later when device is
+ * unloading, the driver should always call free_irq() on all MSI-X vectors
+ * it has done request_irq() on before calling pci_disable_msix(). Failure
+ * to do so results in a BUG_ON() and a device will be left with MSI-X
+ * enabled and leaks its vectors.
  *
- * Return code
- *   0 - driver can claim the device
- *   negative value - driver can not claim the device
+ * Return codes
+ * 0 - sucessful
+ * other values - error
  **/
-static int __devinit
-lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
+static int
+lpfc_sli4_enable_msix(struct lpfc_hba *phba)
 {
-	struct lpfc_vport *vport = NULL;
-	struct lpfc_hba   *phba;
-	struct lpfc_sli   *psli;
-	struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
-	struct Scsi_Host  *shost = NULL;
-	void *ptr;
-	unsigned long bar0map_len, bar2map_len;
-	int error = -ENODEV, retval;
-	int  i, hbq_count;
-	uint16_t iotag;
-	uint32_t cfg_mode, intr_mode;
-	int bars = pci_select_bars(pdev, IORESOURCE_MEM);
-	struct lpfc_adapter_event_header adapter_event;
+	int rc, index;
 
-	if (pci_enable_device_mem(pdev))
-		goto out;
-	if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
-		goto out_disable_device;
+	/* Set up MSI-X multi-message vectors */
+	for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
+		phba->sli4_hba.msix_entries[index].entry = index;
 
-	phba = kzalloc(sizeof (struct lpfc_hba), GFP_KERNEL);
-	if (!phba)
-		goto out_release_regions;
-
-	atomic_set(&phba->fast_event_count, 0);
-	spin_lock_init(&phba->hbalock);
-
-	/* Initialize ndlp management spinlock */
-	spin_lock_init(&phba->ndlp_lock);
-
-	phba->pcidev = pdev;
-
-	/* Assign an unused board number */
-	if ((phba->brd_no = lpfc_get_instance()) < 0)
-		goto out_free_phba;
-
-	INIT_LIST_HEAD(&phba->port_list);
-	init_waitqueue_head(&phba->wait_4_mlo_m_q);
+	/* Configure MSI-X capability structure */
+	rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
+			     phba->sli4_hba.cfg_eqn);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0484 PCI enable MSI-X failed (%d)\n", rc);
+		goto msi_fail_out;
+	}
+	/* Log MSI-X vector assignment */
+	for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0489 MSI-X entry[%d]: vector=x%x "
+				"message=%d\n", index,
+				phba->sli4_hba.msix_entries[index].vector,
+				phba->sli4_hba.msix_entries[index].entry);
 	/*
-	 * Get all the module params for configuring this host and then
-	 * establish the host.
+	 * Assign MSI-X vectors to interrupt handlers
 	 */
-	lpfc_get_cfgparam(phba);
-	phba->max_vpi = LPFC_MAX_VPI;
 
-	/* Initialize timers used by driver */
-	init_timer(&phba->hb_tmofunc);
-	phba->hb_tmofunc.function = lpfc_hb_timeout;
-	phba->hb_tmofunc.data = (unsigned long)phba;
+	/* The first vector must associated to slow-path handler for MQ */
+	rc = request_irq(phba->sli4_hba.msix_entries[0].vector,
+			 &lpfc_sli4_sp_intr_handler, IRQF_SHARED,
+			 LPFC_SP_DRIVER_HANDLER_NAME, phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0485 MSI-X slow-path request_irq failed "
+				"(%d)\n", rc);
+		goto msi_fail_out;
+	}
 
-	psli = &phba->sli;
-	init_timer(&psli->mbox_tmo);
-	psli->mbox_tmo.function = lpfc_mbox_timeout;
-	psli->mbox_tmo.data = (unsigned long) phba;
-	init_timer(&phba->fcp_poll_timer);
-	phba->fcp_poll_timer.function = lpfc_poll_timeout;
-	phba->fcp_poll_timer.data = (unsigned long) phba;
-	init_timer(&phba->fabric_block_timer);
-	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
-	phba->fabric_block_timer.data = (unsigned long) phba;
-	init_timer(&phba->eratt_poll);
-	phba->eratt_poll.function = lpfc_poll_eratt;
-	phba->eratt_poll.data = (unsigned long) phba;
+	/* The rest of the vector(s) are associated to fast-path handler(s) */
+	for (index = 1; index < phba->sli4_hba.cfg_eqn; index++) {
+		phba->sli4_hba.fcp_eq_hdl[index - 1].idx = index - 1;
+		phba->sli4_hba.fcp_eq_hdl[index - 1].phba = phba;
+		rc = request_irq(phba->sli4_hba.msix_entries[index].vector,
+				 &lpfc_sli4_fp_intr_handler, IRQF_SHARED,
+				 LPFC_FP_DRIVER_HANDLER_NAME,
+				 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+					"0486 MSI-X fast-path (%d) "
+					"request_irq failed (%d)\n", index, rc);
+			goto cfg_fail_out;
+		}
+	}
 
-	pci_set_master(pdev);
-	pci_save_state(pdev);
-	pci_try_set_mwi(pdev);
+	return rc;
 
-	if (pci_set_dma_mask(phba->pcidev, DMA_BIT_MASK(64)) != 0)
-		if (pci_set_dma_mask(phba->pcidev, DMA_BIT_MASK(32)) != 0)
-			goto out_idr_remove;
+cfg_fail_out:
+	/* free the irq already requested */
+	for (--index; index >= 1; index--)
+		free_irq(phba->sli4_hba.msix_entries[index - 1].vector,
+			 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+
+	/* free the irq already requested */
+	free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+msi_fail_out:
+	/* Unconfigure MSI-X capability structure */
+	pci_disable_msix(phba->pcidev);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_disable_msix - Disable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release the MSI-X vectors and then disable the
+ * MSI-X interrupt mode to device with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_disable_msix(struct lpfc_hba *phba)
+{
+	int index;
+
+	/* Free up MSI-X multi-message vectors */
+	free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+	for (index = 1; index < phba->sli4_hba.cfg_eqn; index++)
+		free_irq(phba->sli4_hba.msix_entries[index].vector,
+			 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+	/* Disable MSI-X */
+	pci_disable_msix(phba->pcidev);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The kernel function pci_enable_msi() is called
+ * to enable the MSI vector. The device driver is responsible for calling
+ * the request_irq() to register MSI vector with a interrupt the handler,
+ * which is done in this function.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli4_enable_msi(struct lpfc_hba *phba)
+{
+	int rc, index;
+
+	rc = pci_enable_msi(phba->pcidev);
+	if (!rc)
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0487 PCI enable MSI mode success.\n");
+	else {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0488 PCI enable MSI mode failed (%d)\n", rc);
+		return rc;
+	}
+
+	rc = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
+			 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+	if (rc) {
+		pci_disable_msi(phba->pcidev);
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0490 MSI request_irq failed (%d)\n", rc);
+	}
+
+	for (index = 0; index < phba->cfg_fcp_eq_count; index++) {
+		phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+		phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+	}
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_disable_msi - Disable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
+ **/
+static void
+lpfc_sli4_disable_msi(struct lpfc_hba *phba)
+{
+	free_irq(phba->pcidev->irq, phba);
+	pci_disable_msi(phba->pcidev);
+	return;
+}
+
+/**
+ * lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable device interrupt and associate driver's
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-4
+ * interface spec. Depends on the interrupt mode configured to the driver,
+ * the driver will try to fallback from the configured interrupt mode to an
+ * interrupt mode which is supported by the platform, kernel, and device in
+ * the order of:
+ * MSI-X -> MSI -> IRQ.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static uint32_t
+lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+{
+	uint32_t intr_mode = LPFC_INTR_ERROR;
+	int retval, index;
+
+	if (cfg_mode == 2) {
+		/* Preparation before conf_msi mbox cmd */
+		retval = 0;
+		if (!retval) {
+			/* Now, try to enable MSI-X interrupt mode */
+			retval = lpfc_sli4_enable_msix(phba);
+			if (!retval) {
+				/* Indicate initialization to MSI-X mode */
+				phba->intr_type = MSIX;
+				intr_mode = 2;
+			}
+		}
+	}
+
+	/* Fallback to MSI if MSI-X initialization failed */
+	if (cfg_mode >= 1 && phba->intr_type == NONE) {
+		retval = lpfc_sli4_enable_msi(phba);
+		if (!retval) {
+			/* Indicate initialization to MSI mode */
+			phba->intr_type = MSI;
+			intr_mode = 1;
+		}
+	}
+
+	/* Fallback to INTx if both MSI-X/MSI initalization failed */
+	if (phba->intr_type == NONE) {
+		retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
+				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+		if (!retval) {
+			/* Indicate initialization to INTx mode */
+			phba->intr_type = INTx;
+			intr_mode = 0;
+			for (index = 0; index < phba->cfg_fcp_eq_count;
+			     index++) {
+				phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+				phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+			}
+		}
+	}
+	return intr_mode;
+}
+
+/**
+ * lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable device interrupt and disassociate
+ * the driver's interrupt handler(s) from interrupt vector(s) to device
+ * with SLI-4 interface spec. Depending on the interrupt mode, the driver
+ * will release the interrupt vector(s) for the message signaled interrupt.
+ **/
+static void
+lpfc_sli4_disable_intr(struct lpfc_hba *phba)
+{
+	/* Disable the currently initialized interrupt mode */
+	if (phba->intr_type == MSIX)
+		lpfc_sli4_disable_msix(phba);
+	else if (phba->intr_type == MSI)
+		lpfc_sli4_disable_msi(phba);
+	else if (phba->intr_type == INTx)
+		free_irq(phba->pcidev->irq, phba);
+
+	/* Reset interrupt management states */
+	phba->intr_type = NONE;
+	phba->sli.slistat.sli_intr = 0;
+
+	return;
+}
+
+/**
+ * lpfc_unset_hba - Unset SLI3 hba device initialization
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-3 interface spec.
+ **/
+static void
+lpfc_unset_hba(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport = phba->pport;
+	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
+
+	spin_lock_irq(shost->host_lock);
+	vport->load_flag |= FC_UNLOADING;
+	spin_unlock_irq(shost->host_lock);
+
+	lpfc_stop_hba_timers(phba);
+
+	phba->pport->work_port_events = 0;
+
+	lpfc_sli_hba_down(phba);
+
+	lpfc_sli_brdrestart(phba);
+
+	lpfc_sli_disable_intr(phba);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_unset_hba - Unset SLI4 hba device initialization.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_unset_hba(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport = phba->pport;
+	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
+
+	spin_lock_irq(shost->host_lock);
+	vport->load_flag |= FC_UNLOADING;
+	spin_unlock_irq(shost->host_lock);
+
+	phba->pport->work_port_events = 0;
+
+	lpfc_sli4_hba_down(phba);
+
+	lpfc_sli4_disable_intr(phba);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_hba_unset - Unset the fcoe hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI4 code path to reset the HBA's FCoE
+ * function. The caller is not required to hold any lock. This routine
+ * issues PCI function reset mailbox command to reset the FCoE function.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static void
+lpfc_sli4_hba_unset(struct lpfc_hba *phba)
+{
+	int wait_cnt = 0;
+	LPFC_MBOXQ_t *mboxq;
+
+	lpfc_stop_hba_timers(phba);
+	phba->sli4_hba.intr_enable = 0;
 
 	/*
-	 * Get the bus address of Bar0 and Bar2 and the number of bytes
-	 * required by each mapping.
+	 * Gracefully wait out the potential current outstanding asynchronous
+	 * mailbox command.
 	 */
-	phba->pci_bar0_map = pci_resource_start(phba->pcidev, 0);
-	bar0map_len        = pci_resource_len(phba->pcidev, 0);
 
-	phba->pci_bar2_map = pci_resource_start(phba->pcidev, 2);
-	bar2map_len        = pci_resource_len(phba->pcidev, 2);
-
-	/* Map HBA SLIM to a kernel virtual address. */
-	phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
-	if (!phba->slim_memmap_p) {
-		error = -ENODEV;
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "ioremap failed for SLIM memory.\n");
-		goto out_idr_remove;
+	/* First, block any pending async mailbox command from posted */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli.sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, trying to wait it out if we can */
+	while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		msleep(10);
+		if (++wait_cnt > LPFC_ACTIVE_MBOX_WAIT_CNT)
+			break;
 	}
-
-	/* Map HBA Control Registers to a kernel virtual address. */
-	phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
-	if (!phba->ctrl_regs_memmap_p) {
-		error = -ENODEV;
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "ioremap failed for HBA control registers.\n");
-		goto out_iounmap_slim;
-	}
-
-	/* Allocate memory for SLI-2 structures */
-	phba->slim2p.virt = dma_alloc_coherent(&phba->pcidev->dev,
-					       SLI2_SLIM_SIZE,
-					       &phba->slim2p.phys,
-					       GFP_KERNEL);
-	if (!phba->slim2p.virt)
-		goto out_iounmap;
-
-	memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
-	phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
-	phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
-	phba->IOCBs = (phba->slim2p.virt +
-		       offsetof(struct lpfc_sli2_slim, IOCBs));
-
-	phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev,
-						 lpfc_sli_hbq_size(),
-						 &phba->hbqslimp.phys,
-						 GFP_KERNEL);
-	if (!phba->hbqslimp.virt)
-		goto out_free_slim;
-
-	hbq_count = lpfc_sli_hbq_count();
-	ptr = phba->hbqslimp.virt;
-	for (i = 0; i < hbq_count; ++i) {
-		phba->hbqs[i].hbq_virt = ptr;
-		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
-		ptr += (lpfc_hbq_defs[i]->entry_count *
-			sizeof(struct lpfc_hbq_entry));
-	}
-	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
-	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer  = lpfc_els_hbq_free;
-
-	memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
-
-	INIT_LIST_HEAD(&phba->hbqbuf_in_list);
-
-	/* Initialize the SLI Layer to run with lpfc HBAs. */
-	lpfc_sli_setup(phba);
-	lpfc_sli_queue_setup(phba);
-
-	retval = lpfc_mem_alloc(phba);
-	if (retval) {
-		error = retval;
-		goto out_free_hbqslimp;
-	}
-
-	/* Initialize and populate the iocb list per host.  */
-	INIT_LIST_HEAD(&phba->lpfc_iocb_list);
-	for (i = 0; i < LPFC_IOCB_LIST_CNT; i++) {
-		iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
-		if (iocbq_entry == NULL) {
-			printk(KERN_ERR "%s: only allocated %d iocbs of "
-				"expected %d count. Unloading driver.\n",
-				__func__, i, LPFC_IOCB_LIST_CNT);
-			error = -ENOMEM;
-			goto out_free_iocbq;
-		}
-
-		iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
-		if (iotag == 0) {
-			kfree (iocbq_entry);
-			printk(KERN_ERR "%s: failed to allocate IOTAG. "
-			       "Unloading driver.\n",
-				__func__);
-			error = -ENOMEM;
-			goto out_free_iocbq;
-		}
-
+	/* Forcefully release the outstanding mailbox command if timed out */
+	if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
 		spin_lock_irq(&phba->hbalock);
-		list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
-		phba->total_iocbq_bufs++;
+		mboxq = phba->sli.mbox_active;
+		mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+		__lpfc_mbox_cmpl_put(phba, mboxq);
+		phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		phba->sli.mbox_active = NULL;
 		spin_unlock_irq(&phba->hbalock);
 	}
 
-	/* Initialize HBA structure */
-	phba->fc_edtov = FF_DEF_EDTOV;
-	phba->fc_ratov = FF_DEF_RATOV;
-	phba->fc_altov = FF_DEF_ALTOV;
-	phba->fc_arbtov = FF_DEF_ARBTOV;
+	/* Tear down the queues in the HBA */
+	lpfc_sli4_queue_unset(phba);
 
-	INIT_LIST_HEAD(&phba->work_list);
-	phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
-	phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
+	/* Disable PCI subsystem interrupt */
+	lpfc_sli4_disable_intr(phba);
 
-	/* Initialize the wait queue head for the kernel thread */
-	init_waitqueue_head(&phba->work_waitq);
+	/* Stop kthread signal shall trigger work_done one more time */
+	kthread_stop(phba->worker_thread);
 
-	/* Startup the kernel thread for this host adapter. */
-	phba->worker_thread = kthread_run(lpfc_do_work, phba,
-				       "lpfc_worker_%d", phba->brd_no);
-	if (IS_ERR(phba->worker_thread)) {
-		error = PTR_ERR(phba->worker_thread);
-		goto out_free_iocbq;
+	/* Stop the SLI4 device port */
+	phba->pport->work_port_events = 0;
+}
+
+/**
+ * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is to be called to attach a device with SLI-3 interface spec
+ * to the PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it can
+ * support this kind of device. If the match is successful, the driver core
+ * invokes this routine. If this routine determines it can claim the HBA, it
+ * does all the initialization that it needs to do to handle the HBA properly.
+ *
+ * Return code
+ * 	0 - driver can claim the device
+ * 	negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	struct lpfc_hba   *phba;
+	struct lpfc_vport *vport = NULL;
+	int error;
+	uint32_t cfg_mode, intr_mode;
+
+	/* Allocate memory for HBA structure */
+	phba = lpfc_hba_alloc(pdev);
+	if (!phba)
+		return -ENOMEM;
+
+	/* Perform generic PCI device enabling operation */
+	error = lpfc_enable_pci_dev(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1401 Failed to enable pci device.\n");
+		goto out_free_phba;
 	}
 
-	/* Initialize the list of scsi buffers used by driver for scsi IO. */
-	spin_lock_init(&phba->scsi_buf_list_lock);
-	INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
+	/* Set up SLI API function jump table for PCI-device group-0 HBAs */
+	error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP);
+	if (error)
+		goto out_disable_pci_dev;
 
-	/* Initialize list of fabric iocbs */
-	INIT_LIST_HEAD(&phba->fabric_iocb_list);
+	/* Set up SLI-3 specific device PCI memory space */
+	error = lpfc_sli_pci_mem_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1402 Failed to set up pci memory space.\n");
+		goto out_disable_pci_dev;
+	}
 
-	/* Initialize list to save ELS buffers */
-	INIT_LIST_HEAD(&phba->elsbuf);
+	/* Set up phase-1 common device driver resources */
+	error = lpfc_setup_driver_resource_phase1(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1403 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s3;
+	}
 
-	vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
-	if (!vport)
-		goto out_kthread_stop;
+	/* Set up SLI-3 specific device driver resources */
+	error = lpfc_sli_driver_resource_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1404 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s3;
+	}
 
-	shost = lpfc_shost_from_vport(vport);
-	phba->pport = vport;
-	lpfc_debugfs_initialize(vport);
+	/* Initialize and populate the iocb list per host */
+	error = lpfc_init_iocb_list(phba, LPFC_IOCB_LIST_CNT);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1405 Failed to initialize iocb list.\n");
+		goto out_unset_driver_resource_s3;
+	}
 
-	pci_set_drvdata(pdev, shost);
+	/* Set up common device driver resources */
+	error = lpfc_setup_driver_resource_phase2(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1406 Failed to set up driver resource.\n");
+		goto out_free_iocb_list;
+	}
 
-	phba->MBslimaddr = phba->slim_memmap_p;
-	phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
-	phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
-	phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
-	phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+	/* Create SCSI host to the physical port */
+	error = lpfc_create_shost(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1407 Failed to create scsi host.\n");
+		goto out_unset_driver_resource;
+	}
 
 	/* Configure sysfs attributes */
-	if (lpfc_alloc_sysfs_attr(vport)) {
+	vport = phba->pport;
+	error = lpfc_alloc_sysfs_attr(vport);
+	if (error) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1476 Failed to allocate sysfs attr\n");
-		error = -ENOMEM;
-		goto out_destroy_port;
+		goto out_destroy_shost;
 	}
 
+	/* Now, trying to enable interrupt and bring up the device */
 	cfg_mode = phba->cfg_use_msi;
 	while (true) {
+		/* Put device to a known state before enabling interrupt */
+		lpfc_stop_port(phba);
 		/* Configure and enable interrupt */
-		intr_mode = lpfc_enable_intr(phba, cfg_mode);
+		intr_mode = lpfc_sli_enable_intr(phba, cfg_mode);
 		if (intr_mode == LPFC_INTR_ERROR) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"0426 Failed to enable interrupt.\n");
+					"0431 Failed to enable interrupt.\n");
+			error = -ENODEV;
 			goto out_free_sysfs_attr;
 		}
-		/* HBA SLI setup */
+		/* SLI-3 HBA setup */
 		if (lpfc_sli_hba_setup(phba)) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 					"1477 Failed to set up hba\n");
@@ -2902,185 +6796,65 @@
 
 		/* Wait 50ms for the interrupts of previous mailbox commands */
 		msleep(50);
-		/* Check active interrupts received */
-		if (phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
+		/* Check active interrupts on message signaled interrupts */
+		if (intr_mode == 0 ||
+		    phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
 			/* Log the current active interrupt mode */
 			phba->intr_mode = intr_mode;
 			lpfc_log_intr_mode(phba, intr_mode);
 			break;
 		} else {
 			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"0451 Configure interrupt mode (%d) "
+					"0447 Configure interrupt mode (%d) "
 					"failed active interrupt test.\n",
 					intr_mode);
-			if (intr_mode == 0) {
-				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-						"0479 Failed to enable "
-						"interrupt.\n");
-				error = -ENODEV;
-				goto out_remove_device;
-			}
-			/* Stop HBA SLI setups */
-			lpfc_stop_port(phba);
 			/* Disable the current interrupt mode */
-			lpfc_disable_intr(phba);
+			lpfc_sli_disable_intr(phba);
 			/* Try next level of interrupt mode */
 			cfg_mode = --intr_mode;
 		}
 	}
 
-	/*
-	 * hba setup may have changed the hba_queue_depth so we need to adjust
-	 * the value of can_queue.
-	 */
-	shost->can_queue = phba->cfg_hba_queue_depth - 10;
-	if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
+	/* Perform post initialization setup */
+	lpfc_post_init_setup(phba);
 
-		if (lpfc_prot_mask && lpfc_prot_guard) {
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"1478 Registering BlockGuard with the "
-					"SCSI layer\n");
-
-			scsi_host_set_prot(shost, lpfc_prot_mask);
-			scsi_host_set_guard(shost, lpfc_prot_guard);
-		}
-	}
-
-	if (!_dump_buf_data) {
-		int pagecnt = 10;
-		while (pagecnt) {
-			spin_lock_init(&_dump_buf_lock);
-			_dump_buf_data =
-				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
-			if (_dump_buf_data) {
-				printk(KERN_ERR "BLKGRD allocated %d pages for "
-						"_dump_buf_data at 0x%p\n",
-						(1 << pagecnt), _dump_buf_data);
-				_dump_buf_data_order = pagecnt;
-				memset(_dump_buf_data, 0, ((1 << PAGE_SHIFT)
-							   << pagecnt));
-				break;
-			} else {
-				--pagecnt;
-			}
-
-		}
-
-		if (!_dump_buf_data_order)
-			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
-					"memory for hexdump\n");
-
-	} else {
-		printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
-		       "\n", _dump_buf_data);
-	}
-
-
-	if (!_dump_buf_dif) {
-		int pagecnt = 10;
-		while (pagecnt) {
-			_dump_buf_dif =
-				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
-			if (_dump_buf_dif) {
-				printk(KERN_ERR "BLKGRD allocated %d pages for "
-						"_dump_buf_dif at 0x%p\n",
-						(1 << pagecnt), _dump_buf_dif);
-				_dump_buf_dif_order = pagecnt;
-				memset(_dump_buf_dif, 0, ((1 << PAGE_SHIFT)
-							  << pagecnt));
-				break;
-			} else {
-				--pagecnt;
-			}
-
-		}
-
-		if (!_dump_buf_dif_order)
-			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
-					"memory for hexdump\n");
-
-	} else {
-		printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
-				_dump_buf_dif);
-	}
-
-	lpfc_host_attrib_init(shost);
-
-	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
-		spin_lock_irq(shost->host_lock);
-		lpfc_poll_start_timer(phba);
-		spin_unlock_irq(shost->host_lock);
-	}
-
-	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-			"0428 Perform SCSI scan\n");
-	/* Send board arrival event to upper layer */
-	adapter_event.event_type = FC_REG_ADAPTER_EVENT;
-	adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
-	fc_host_post_vendor_event(shost, fc_get_event_number(),
-		sizeof(adapter_event),
-		(char *) &adapter_event,
-		LPFC_NL_VENDOR_ID);
+	/* Check if there are static vports to be created. */
+	lpfc_create_static_vport(phba);
 
 	return 0;
 
 out_remove_device:
-	spin_lock_irq(shost->host_lock);
-	vport->load_flag |= FC_UNLOADING;
-	spin_unlock_irq(shost->host_lock);
-	lpfc_stop_phba_timers(phba);
-	phba->pport->work_port_events = 0;
-	lpfc_disable_intr(phba);
-	lpfc_sli_hba_down(phba);
-	lpfc_sli_brdrestart(phba);
+	lpfc_unset_hba(phba);
 out_free_sysfs_attr:
 	lpfc_free_sysfs_attr(vport);
-out_destroy_port:
-	destroy_port(vport);
-out_kthread_stop:
-	kthread_stop(phba->worker_thread);
-out_free_iocbq:
-	list_for_each_entry_safe(iocbq_entry, iocbq_next,
-						&phba->lpfc_iocb_list, list) {
-		kfree(iocbq_entry);
-		phba->total_iocbq_bufs--;
-	}
-	lpfc_mem_free(phba);
-out_free_hbqslimp:
-	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
-			  phba->hbqslimp.virt, phba->hbqslimp.phys);
-out_free_slim:
-	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
-			  phba->slim2p.virt, phba->slim2p.phys);
-out_iounmap:
-	iounmap(phba->ctrl_regs_memmap_p);
-out_iounmap_slim:
-	iounmap(phba->slim_memmap_p);
-out_idr_remove:
-	idr_remove(&lpfc_hba_index, phba->brd_no);
+out_destroy_shost:
+	lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+	lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+	lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s3:
+	lpfc_sli_driver_resource_unset(phba);
+out_unset_pci_mem_s3:
+	lpfc_sli_pci_mem_unset(phba);
+out_disable_pci_dev:
+	lpfc_disable_pci_dev(phba);
 out_free_phba:
-	kfree(phba);
-out_release_regions:
-	pci_release_selected_regions(pdev, bars);
-out_disable_device:
-	pci_disable_device(pdev);
-out:
-	pci_set_drvdata(pdev, NULL);
-	if (shost)
-		scsi_host_put(shost);
+	lpfc_hba_free(phba);
 	return error;
 }
 
 /**
- * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem
+ * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
  * @pdev: pointer to PCI device
  *
- * This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is removed from PCI bus, it performs all the necessary cleanup
- * for the HBA device to be removed from the PCI subsystem properly.
+ * This routine is to be called to disattach a device with SLI-3 interface
+ * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
  **/
 static void __devexit
-lpfc_pci_remove_one(struct pci_dev *pdev)
+lpfc_pci_remove_one_s3(struct pci_dev *pdev)
 {
 	struct Scsi_Host  *shost = pci_get_drvdata(pdev);
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
@@ -3098,7 +6872,7 @@
 	/* Release all the vports against this physical port */
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for (i = 1; i <= phba->max_vpi && vports[i] != NULL; i++)
+		for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
 			fc_vport_terminate(vports[i]->fc_vport);
 	lpfc_destroy_vport_work_array(phba, vports);
 
@@ -3120,7 +6894,7 @@
 	/* Final cleanup of txcmplq and reset the HBA */
 	lpfc_sli_brdrestart(phba);
 
-	lpfc_stop_phba_timers(phba);
+	lpfc_stop_hba_timers(phba);
 	spin_lock_irq(&phba->hbalock);
 	list_del_init(&vport->listentry);
 	spin_unlock_irq(&phba->hbalock);
@@ -3128,7 +6902,7 @@
 	lpfc_debugfs_terminate(vport);
 
 	/* Disable interrupt */
-	lpfc_disable_intr(phba);
+	lpfc_sli_disable_intr(phba);
 
 	pci_set_drvdata(pdev, NULL);
 	scsi_host_put(shost);
@@ -3138,7 +6912,7 @@
 	 * corresponding pools here.
 	 */
 	lpfc_scsi_free(phba);
-	lpfc_mem_free(phba);
+	lpfc_mem_free_all(phba);
 
 	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
 			  phba->hbqslimp.virt, phba->hbqslimp.phys);
@@ -3151,36 +6925,35 @@
 	iounmap(phba->ctrl_regs_memmap_p);
 	iounmap(phba->slim_memmap_p);
 
-	idr_remove(&lpfc_hba_index, phba->brd_no);
-
-	kfree(phba);
+	lpfc_hba_free(phba);
 
 	pci_release_selected_regions(pdev, bars);
 	pci_disable_device(pdev);
 }
 
 /**
- * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management
+ * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
  * @pdev: pointer to PCI device
  * @msg: power management message
  *
- * This routine is to be registered to the kernel's PCI subsystem to support
- * system Power Management (PM). When PM invokes this method, it quiesces the
- * device by stopping the driver's worker thread for the device, turning off
- * device's interrupt and DMA, and bring the device offline. Note that as the
- * driver implements the minimum PM requirements to a power-aware driver's PM
- * support for suspend/resume -- all the possible PM messages (SUSPEND,
- * HIBERNATE, FREEZE) to the suspend() method call will be treated as SUSPEND
- * and the driver will fully reinitialize its device during resume() method
- * call, the driver will set device to PCI_D3hot state in PCI config space
- * instead of setting it according to the @msg provided by the PM.
+ * This routine is to be called from the kernel's PCI subsystem to support
+ * system Power Management (PM) to device with SLI-3 interface spec. When
+ * PM invokes this method, it quiesces the device by stopping the driver's
+ * worker thread for the device, turning off device's interrupt and DMA,
+ * and bring the device offline. Note that as the driver implements the
+ * minimum PM requirements to a power-aware driver's PM support for the
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver will
+ * fully reinitialize its device during resume() method call, the driver will
+ * set device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
  *
  * Return code
- *   0 - driver suspended the device
- *   Error otherwise
+ * 	0 - driver suspended the device
+ * 	Error otherwise
  **/
 static int
-lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3194,7 +6967,7 @@
 	kthread_stop(phba->worker_thread);
 
 	/* Disable interrupt from device */
-	lpfc_disable_intr(phba);
+	lpfc_sli_disable_intr(phba);
 
 	/* Save device state to PCI config space */
 	pci_save_state(pdev);
@@ -3204,25 +6977,26 @@
 }
 
 /**
- * lpfc_pci_resume_one - lpfc PCI func to resume device for power management
+ * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
  * @pdev: pointer to PCI device
  *
- * This routine is to be registered to the kernel's PCI subsystem to support
- * system Power Management (PM). When PM invokes this method, it restores
- * the device's PCI config space state and fully reinitializes the device
- * and brings it online. Note that as the driver implements the minimum PM
- * requirements to a power-aware driver's PM for suspend/resume -- all
- * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
- * method call will be treated as SUSPEND and the driver will fully
- * reinitialize its device during resume() method call, the device will be
- * set to PCI_D0 directly in PCI config space before restoring the state.
+ * This routine is to be called from the kernel's PCI subsystem to support
+ * system Power Management (PM) to device with SLI-3 interface spec. When PM
+ * invokes this method, it restores the device's PCI config space state and
+ * fully reinitializes the device and brings it online. Note that as the
+ * driver implements the minimum PM requirements to a power-aware driver's
+ * PM for suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE,
+ * FREEZE) to the suspend() method call will be treated as SUSPEND and the
+ * driver will fully reinitialize its device during resume() method call,
+ * the device will be set to PCI_D0 directly in PCI config space before
+ * restoring the state.
  *
  * Return code
- *   0 - driver suspended the device
- *   Error otherwise
+ * 	0 - driver suspended the device
+ * 	Error otherwise
  **/
 static int
-lpfc_pci_resume_one(struct pci_dev *pdev)
+lpfc_pci_resume_one_s3(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3250,7 +7024,7 @@
 	}
 
 	/* Configure and enable interrupt */
-	intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+	intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
 	if (intr_mode == LPFC_INTR_ERROR) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0430 PM resume Failed to enable interrupt\n");
@@ -3269,23 +7043,24 @@
 }
 
 /**
- * lpfc_io_error_detected - Driver method for handling PCI I/O error detected
+ * lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
  * @pdev: pointer to PCI device.
  * @state: the current PCI connection state.
  *
- * This routine is registered to the PCI subsystem for error handling. This
- * function is called by the PCI subsystem after a PCI bus error affecting
- * this device has been detected. When this function is invoked, it will
- * need to stop all the I/Os and interrupt(s) to the device. Once that is
- * done, it will return PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to
- * perform proper recovery as desired.
+ * This routine is called from the PCI subsystem for I/O error handling to
+ * device with SLI-3 interface spec. This function is called by the PCI
+ * subsystem after a PCI bus error affecting this device has been detected.
+ * When this function is invoked, it will need to stop all the I/Os and
+ * interrupt(s) to the device. Once that is done, it will return
+ * PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to perform proper recovery
+ * as desired.
  *
  * Return codes
- *   PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
- *   PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
  **/
-static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
-				pci_channel_state_t state)
+static pci_ers_result_t
+lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3312,30 +7087,32 @@
 	lpfc_sli_abort_iocb_ring(phba, pring);
 
 	/* Disable interrupt */
-	lpfc_disable_intr(phba);
+	lpfc_sli_disable_intr(phba);
 
 	/* Request a slot reset. */
 	return PCI_ERS_RESULT_NEED_RESET;
 }
 
 /**
- * lpfc_io_slot_reset - Restart a PCI device from scratch
+ * lpfc_io_slot_reset_s3 - Method for restarting PCI SLI-3 device from scratch.
  * @pdev: pointer to PCI device.
  *
- * This routine is registered to the PCI subsystem for error handling. This is
- * called after PCI bus has been reset to restart the PCI card from scratch,
- * as if from a cold-boot. During the PCI subsystem error recovery, after the
- * driver returns PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform
- * proper error recovery and then call this routine before calling the .resume
- * method to recover the device. This function will initialize the HBA device,
- * enable the interrupt, but it will just put the HBA to offline state without
- * passing any I/O traffic.
+ * This routine is called from the PCI subsystem for error handling to
+ * device with SLI-3 interface spec. This is called after PCI bus has been
+ * reset to restart the PCI card from scratch, as if from a cold-boot.
+ * During the PCI subsystem error recovery, after driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method
+ * to recover the device. This function will initialize the HBA device,
+ * enable the interrupt, but it will just put the HBA to offline state
+ * without passing any I/O traffic.
  *
  * Return codes
- *   PCI_ERS_RESULT_RECOVERED - the device has been recovered
- *   PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
  */
-static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
+static pci_ers_result_t
+lpfc_io_slot_reset_s3(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3354,11 +7131,11 @@
 		pci_set_master(pdev);
 
 	spin_lock_irq(&phba->hbalock);
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 
 	/* Configure and enable interrupt */
-	intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+	intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
 	if (intr_mode == LPFC_INTR_ERROR) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0427 Cannot re-enable interrupt after "
@@ -3378,15 +7155,17 @@
 }
 
 /**
- * lpfc_io_resume - Resume PCI I/O operation
+ * lpfc_io_resume_s3 - Method for resuming PCI I/O operation on SLI-3 device.
  * @pdev: pointer to PCI device
  *
- * This routine is registered to the PCI subsystem for error handling. It is
- * called when kernel error recovery tells the lpfc driver that it is ok to
- * resume normal PCI operation after PCI bus error recovery. After this call,
- * traffic can start to flow from this device again.
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-3 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
  */
-static void lpfc_io_resume(struct pci_dev *pdev)
+static void
+lpfc_io_resume_s3(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3394,6 +7173,697 @@
 	lpfc_online(phba);
 }
 
+/**
+ * lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * returns the number of ELS/CT IOCBs to reserve
+ **/
+int
+lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
+{
+	int max_xri = phba->sli4_hba.max_cfg_param.max_xri;
+
+	if (max_xri <= 100)
+		return 4;
+	else if (max_xri <= 256)
+		return 8;
+	else if (max_xri <= 512)
+		return 16;
+	else if (max_xri <= 1024)
+		return 32;
+	else
+		return 48;
+}
+
+/**
+ * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it
+ * can support this kind of device. If the match is successful, the driver
+ * core invokes this routine. If this routine determines it can claim the HBA,
+ * it does all the initialization that it needs to do to handle the HBA
+ * properly.
+ *
+ * Return code
+ * 	0 - driver can claim the device
+ * 	negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	struct lpfc_hba   *phba;
+	struct lpfc_vport *vport = NULL;
+	int error;
+	uint32_t cfg_mode, intr_mode;
+	int mcnt;
+
+	/* Allocate memory for HBA structure */
+	phba = lpfc_hba_alloc(pdev);
+	if (!phba)
+		return -ENOMEM;
+
+	/* Perform generic PCI device enabling operation */
+	error = lpfc_enable_pci_dev(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1409 Failed to enable pci device.\n");
+		goto out_free_phba;
+	}
+
+	/* Set up SLI API function jump table for PCI-device group-1 HBAs */
+	error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
+	if (error)
+		goto out_disable_pci_dev;
+
+	/* Set up SLI-4 specific device PCI memory space */
+	error = lpfc_sli4_pci_mem_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1410 Failed to set up pci memory space.\n");
+		goto out_disable_pci_dev;
+	}
+
+	/* Set up phase-1 common device driver resources */
+	error = lpfc_setup_driver_resource_phase1(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1411 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s4;
+	}
+
+	/* Set up SLI-4 Specific device driver resources */
+	error = lpfc_sli4_driver_resource_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1412 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s4;
+	}
+
+	/* Initialize and populate the iocb list per host */
+	error = lpfc_init_iocb_list(phba,
+			phba->sli4_hba.max_cfg_param.max_xri);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1413 Failed to initialize iocb list.\n");
+		goto out_unset_driver_resource_s4;
+	}
+
+	/* Set up common device driver resources */
+	error = lpfc_setup_driver_resource_phase2(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1414 Failed to set up driver resource.\n");
+		goto out_free_iocb_list;
+	}
+
+	/* Create SCSI host to the physical port */
+	error = lpfc_create_shost(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1415 Failed to create scsi host.\n");
+		goto out_unset_driver_resource;
+	}
+
+	/* Configure sysfs attributes */
+	vport = phba->pport;
+	error = lpfc_alloc_sysfs_attr(vport);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1416 Failed to allocate sysfs attr\n");
+		goto out_destroy_shost;
+	}
+
+	/* Now, trying to enable interrupt and bring up the device */
+	cfg_mode = phba->cfg_use_msi;
+	while (true) {
+		/* Put device to a known state before enabling interrupt */
+		lpfc_stop_port(phba);
+		/* Configure and enable interrupt */
+		intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode);
+		if (intr_mode == LPFC_INTR_ERROR) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0426 Failed to enable interrupt.\n");
+			error = -ENODEV;
+			goto out_free_sysfs_attr;
+		}
+		/* Set up SLI-4 HBA */
+		if (lpfc_sli4_hba_setup(phba)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1421 Failed to set up hba\n");
+			error = -ENODEV;
+			goto out_disable_intr;
+		}
+
+		/* Send NOP mbx cmds for non-INTx mode active interrupt test */
+		if (intr_mode != 0)
+			mcnt = lpfc_sli4_send_nop_mbox_cmds(phba,
+							    LPFC_ACT_INTR_CNT);
+
+		/* Check active interrupts received only for MSI/MSI-X */
+		if (intr_mode == 0 ||
+		    phba->sli.slistat.sli_intr >= LPFC_ACT_INTR_CNT) {
+			/* Log the current active interrupt mode */
+			phba->intr_mode = intr_mode;
+			lpfc_log_intr_mode(phba, intr_mode);
+			break;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0451 Configure interrupt mode (%d) "
+				"failed active interrupt test.\n",
+				intr_mode);
+		/* Unset the preivous SLI-4 HBA setup */
+		lpfc_sli4_unset_hba(phba);
+		/* Try next level of interrupt mode */
+		cfg_mode = --intr_mode;
+	}
+
+	/* Perform post initialization setup */
+	lpfc_post_init_setup(phba);
+
+	return 0;
+
+out_disable_intr:
+	lpfc_sli4_disable_intr(phba);
+out_free_sysfs_attr:
+	lpfc_free_sysfs_attr(vport);
+out_destroy_shost:
+	lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+	lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+	lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s4:
+	lpfc_sli4_driver_resource_unset(phba);
+out_unset_pci_mem_s4:
+	lpfc_sli4_pci_mem_unset(phba);
+out_disable_pci_dev:
+	lpfc_disable_pci_dev(phba);
+out_free_phba:
+	lpfc_hba_free(phba);
+	return error;
+}
+
+/**
+ * lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one_s4(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_vport **vports;
+	struct lpfc_hba *phba = vport->phba;
+	int i;
+
+	/* Mark the device unloading flag */
+	spin_lock_irq(&phba->hbalock);
+	vport->load_flag |= FC_UNLOADING;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Free the HBA sysfs attributes */
+	lpfc_free_sysfs_attr(vport);
+
+	/* Release all the vports against this physical port */
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL)
+		for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
+			fc_vport_terminate(vports[i]->fc_vport);
+	lpfc_destroy_vport_work_array(phba, vports);
+
+	/* Remove FC host and then SCSI host with the physical port */
+	fc_remove_host(shost);
+	scsi_remove_host(shost);
+
+	/* Perform cleanup on the physical port */
+	lpfc_cleanup(vport);
+
+	/*
+	 * Bring down the SLI Layer. This step disables all interrupts,
+	 * clears the rings, discards all mailbox commands, and resets
+	 * the HBA FCoE function.
+	 */
+	lpfc_debugfs_terminate(vport);
+	lpfc_sli4_hba_unset(phba);
+
+	spin_lock_irq(&phba->hbalock);
+	list_del_init(&vport->listentry);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Call scsi_free before lpfc_sli4_driver_resource_unset since scsi
+	 * buffers are released to their corresponding pools here.
+	 */
+	lpfc_scsi_free(phba);
+	lpfc_sli4_driver_resource_unset(phba);
+
+	/* Unmap adapter Control and Doorbell registers */
+	lpfc_sli4_pci_mem_unset(phba);
+
+	/* Release PCI resources and disable device's PCI function */
+	scsi_host_put(shost);
+	lpfc_disable_pci_dev(phba);
+
+	/* Finally, free the driver's device data structure */
+	lpfc_hba_free(phba);
+
+	return;
+}
+
+/**
+ * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
+ * this method, it quiesces the device by stopping the driver's worker
+ * thread for the device, turning off device's interrupt and DMA, and bring
+ * the device offline. Note that as the driver implements the minimum PM
+ * requirements to a power-aware driver's PM support for suspend/resume -- all
+ * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
+ * method call will be treated as SUSPEND and the driver will fully
+ * reinitialize its device during resume() method call, the driver will set
+ * device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0298 PCI device Power Management suspend.\n");
+
+	/* Bring down the device */
+	lpfc_offline_prep(phba);
+	lpfc_offline(phba);
+	kthread_stop(phba->worker_thread);
+
+	/* Disable interrupt from device */
+	lpfc_sli4_disable_intr(phba);
+
+	/* Save device state to PCI config space */
+	pci_save_state(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+/**
+ * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
+ * this method, it restores the device's PCI config space state and fully
+ * reinitializes the device and brings it online. Note that as the driver
+ * implements the minimum PM requirements to a power-aware driver's PM for
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver
+ * will fully reinitialize its device during resume() method call, the device
+ * will be set to PCI_D0 directly in PCI config space before restoring the
+ * state.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_resume_one_s4(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	uint32_t intr_mode;
+	int error;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0292 PCI device Power Management resume.\n");
+
+	/* Restore device state from PCI config space */
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	if (pdev->is_busmaster)
+		pci_set_master(pdev);
+
+	 /* Startup the kernel thread for this host adapter. */
+	phba->worker_thread = kthread_run(lpfc_do_work, phba,
+					"lpfc_worker_%d", phba->brd_no);
+	if (IS_ERR(phba->worker_thread)) {
+		error = PTR_ERR(phba->worker_thread);
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0293 PM resume failed to start worker "
+				"thread: error=x%x.\n", error);
+		return error;
+	}
+
+	/* Configure and enable interrupt */
+	intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
+	if (intr_mode == LPFC_INTR_ERROR) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0294 PM resume Failed to enable interrupt\n");
+		return -EIO;
+	} else
+		phba->intr_mode = intr_mode;
+
+	/* Restart HBA and bring it online */
+	lpfc_sli_brdrestart(phba);
+	lpfc_online(phba);
+
+	/* Log the current active interrupt mode */
+	lpfc_log_intr_mode(phba, phba->intr_mode);
+
+	return 0;
+}
+
+/**
+ * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. This function is called by the PCI subsystem
+ * after a PCI bus error affecting this device has been detected. When this
+ * function is invoked, it will need to stop all the I/Os and interrupt(s)
+ * to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET
+ * for the PCI subsystem to perform proper recovery as desired.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called after PCI bus has been reset to
+ * restart the PCI card from scratch, as if from a cold-boot. During the
+ * PCI subsystem error recovery, after the driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method to
+ * recover the device. This function will initialize the HBA device, enable
+ * the interrupt, but it will just put the HBA to offline state without
+ * passing any I/O traffic.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ */
+static pci_ers_result_t
+lpfc_io_slot_reset_s4(struct pci_dev *pdev)
+{
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
+ **/
+static void
+lpfc_io_resume_s4(struct pci_dev *pdev)
+{
+	return;
+}
+
+/**
+ * lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is to be registered to the kernel's PCI subsystem. When an
+ * Emulex HBA device is presented on PCI bus, the kernel PCI subsystem looks
+ * at PCI device-specific information of the device and driver to see if the
+ * driver state that it can support this kind of device. If the match is
+ * successful, the driver core invokes this routine. This routine dispatches
+ * the action to the proper SLI-3 or SLI-4 device probing routine, which will
+ * do all the initialization that it needs to do to handle the HBA device
+ * properly.
+ *
+ * Return code
+ * 	0 - driver can claim the device
+ * 	negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	int rc;
+	uint16_t dev_id;
+
+	if (pci_read_config_word(pdev, PCI_DEVICE_ID, &dev_id))
+		return -ENODEV;
+
+	switch (dev_id) {
+	case PCI_DEVICE_ID_TIGERSHARK:
+	case PCI_DEVICE_ID_TIGERSHARK_S:
+		rc = lpfc_pci_probe_one_s4(pdev, pid);
+		break;
+	default:
+		rc = lpfc_pci_probe_one_s3(pdev, pid);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_pci_remove_one - lpfc PCI func to unreg dev from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem. When an
+ * Emulex HBA is removed from PCI bus, the driver core invokes this routine.
+ * This routine dispatches the action to the proper SLI-3 or SLI-4 device
+ * remove routine, which will perform all the necessary cleanup for the
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		lpfc_pci_remove_one_s3(pdev);
+		break;
+	case LPFC_PCI_DEV_OC:
+		lpfc_pci_remove_one_s4(pdev);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1424 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return;
+}
+
+/**
+ * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device suspend routine, which will
+ * suspend the device.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	int rc = -ENODEV;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		rc = lpfc_pci_suspend_one_s3(pdev, msg);
+		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_pci_suspend_one_s4(pdev, msg);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1425 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device resume routine, which will
+ * resume the device.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_resume_one(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	int rc = -ENODEV;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		rc = lpfc_pci_resume_one_s3(pdev);
+		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_pci_resume_one_s4(pdev);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1426 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_io_error_detected - lpfc method for handling PCI I/O error
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is registered to the PCI subsystem for error handling. This
+ * function is called by the PCI subsystem after a PCI bus error affecting
+ * this device has been detected. When this routine is invoked, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device error detected handling
+ * routine, which will perform the proper error detected operation.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		rc = lpfc_io_error_detected_s3(pdev, state);
+		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_io_error_detected_s4(pdev, state);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1427 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_io_slot_reset - lpfc method for restart PCI dev from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is registered to the PCI subsystem for error handling. This
+ * function is called after PCI bus has been reset to restart the PCI card
+ * from scratch, as if from a cold-boot. When this routine is invoked, it
+ * dispatches the action to the proper SLI-3 or SLI-4 device reset handling
+ * routine, which will perform the proper device reset.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_slot_reset(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		rc = lpfc_io_slot_reset_s3(pdev);
+		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_io_slot_reset_s4(pdev);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1428 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_io_resume - lpfc method for resuming PCI I/O operation
+ * @pdev: pointer to PCI device
+ *
+ * This routine is registered to the PCI subsystem for error handling. It
+ * is called when kernel error recovery tells the lpfc driver that it is
+ * OK to resume normal PCI operation after PCI bus error recovery. When
+ * this routine is invoked, it dispatches the action to the proper SLI-3
+ * or SLI-4 device io_resume routine, which will resume the device operation.
+ **/
+static void
+lpfc_io_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		lpfc_io_resume_s3(pdev);
+		break;
+	case LPFC_PCI_DEV_OC:
+		lpfc_io_resume_s4(pdev);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1429 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return;
+}
+
 static struct pci_device_id lpfc_id_table[] = {
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
 		PCI_ANY_ID, PCI_ANY_ID, },
@@ -3469,6 +7939,10 @@
 		PCI_ANY_ID, PCI_ANY_ID, },
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_S,
 		PCI_ANY_ID, PCI_ANY_ID, },
+	{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
+		PCI_ANY_ID, PCI_ANY_ID, },
+	{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK_S,
+		PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0 }
 };
 
@@ -3486,7 +7960,7 @@
 	.probe		= lpfc_pci_probe_one,
 	.remove		= __devexit_p(lpfc_pci_remove_one),
 	.suspend        = lpfc_pci_suspend_one,
-	.resume         = lpfc_pci_resume_one,
+	.resume		= lpfc_pci_resume_one,
 	.err_handler    = &lpfc_err_handler,
 };
 
diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
index 1aa8570..954ba57 100644
--- a/drivers/scsi/lpfc/lpfc_logmsg.h
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -18,33 +18,39 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LOG_ELS                       0x1	/* ELS events */
-#define LOG_DISCOVERY                 0x2	/* Link discovery events */
-#define LOG_MBOX                      0x4	/* Mailbox events */
-#define LOG_INIT                      0x8	/* Initialization events */
-#define LOG_LINK_EVENT                0x10	/* Link events */
-#define LOG_IP                        0x20	/* IP traffic history */
-#define LOG_FCP                       0x40	/* FCP traffic history */
-#define LOG_NODE                      0x80	/* Node table events */
-#define LOG_TEMP                      0x100	/* Temperature sensor events */
-#define LOG_BG			      0x200	/* BlockGuard events */
-#define LOG_MISC                      0x400	/* Miscellaneous events */
-#define LOG_SLI                       0x800	/* SLI events */
-#define LOG_FCP_ERROR                 0x1000	/* log errors, not underruns */
-#define LOG_LIBDFC                    0x2000	/* Libdfc events */
-#define LOG_VPORT                     0x4000	/* NPIV events */
-#define LOG_ALL_MSG                   0xffff	/* LOG all messages */
+#define LOG_ELS		0x00000001	/* ELS events */
+#define LOG_DISCOVERY	0x00000002	/* Link discovery events */
+#define LOG_MBOX	0x00000004	/* Mailbox events */
+#define LOG_INIT	0x00000008	/* Initialization events */
+#define LOG_LINK_EVENT	0x00000010	/* Link events */
+#define LOG_IP		0x00000020	/* IP traffic history */
+#define LOG_FCP		0x00000040	/* FCP traffic history */
+#define LOG_NODE	0x00000080	/* Node table events */
+#define LOG_TEMP	0x00000100	/* Temperature sensor events */
+#define LOG_BG		0x00000200	/* BlockGuard events */
+#define LOG_MISC	0x00000400	/* Miscellaneous events */
+#define LOG_SLI		0x00000800	/* SLI events */
+#define LOG_FCP_ERROR	0x00001000	/* log errors, not underruns */
+#define LOG_LIBDFC	0x00002000	/* Libdfc events */
+#define LOG_VPORT	0x00004000	/* NPIV events */
+#define LOF_SECURITY	0x00008000	/* Security events */
+#define LOG_EVENT	0x00010000	/* CT,TEMP,DUMP, logging */
+#define LOG_ALL_MSG	0xffffffff	/* LOG all messages */
 
 #define lpfc_printf_vlog(vport, level, mask, fmt, arg...) \
-	do { \
-	{ if (((mask) &(vport)->cfg_log_verbose) || (level[1] <= '3')) \
+do { \
+	{ if (((mask) & (vport)->cfg_log_verbose) || (level[1] <= '3')) \
 		dev_printk(level, &((vport)->phba->pcidev)->dev, "%d:(%d):" \
 			   fmt, (vport)->phba->brd_no, vport->vpi, ##arg); } \
-	} while (0)
+} while (0)
 
 #define lpfc_printf_log(phba, level, mask, fmt, arg...) \
-	do { \
-	{ if (((mask) &(phba)->pport->cfg_log_verbose) || (level[1] <= '3')) \
+do { \
+	{ uint32_t log_verbose = (phba)->pport ? \
+				 (phba)->pport->cfg_log_verbose : \
+				 (phba)->cfg_log_verbose; \
+	  if (((mask) & log_verbose) || (level[1] <= '3')) \
 		dev_printk(level, &((phba)->pcidev)->dev, "%d:" \
-			   fmt, phba->brd_no, ##arg); } \
-	} while (0)
+			   fmt, phba->brd_no, ##arg); \
+	} \
+} while (0)
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 134fc7f..b9b451c 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -28,8 +28,10 @@
 
 #include <scsi/scsi.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -39,6 +41,44 @@
 #include "lpfc_compat.h"
 
 /**
+ * lpfc_dump_static_vport - Dump HBA's static vport information.
+ * @phba: pointer to lpfc hba data structure.
+ * @pmb: pointer to the driver internal queue element for mailbox command.
+ * @offset: offset for dumping vport info.
+ *
+ * The dump mailbox command provides a method for the device driver to obtain
+ * various types of information from the HBA device.
+ *
+ * This routine prepares the mailbox command for dumping list of static
+ * vports to be created.
+ **/
+void
+lpfc_dump_static_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb,
+		uint16_t offset)
+{
+	MAILBOX_t *mb;
+	void *ctx;
+
+	mb = &pmb->u.mb;
+	ctx = pmb->context2;
+
+	/* Setup to dump vport info region */
+	memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
+	mb->mbxCommand = MBX_DUMP_MEMORY;
+	mb->un.varDmp.cv = 1;
+	mb->un.varDmp.type = DMP_NV_PARAMS;
+	mb->un.varDmp.entry_index = offset;
+	mb->un.varDmp.region_id = DMP_REGION_VPORT;
+	mb->un.varDmp.word_cnt = DMP_RSP_SIZE/sizeof(uint32_t);
+	mb->un.varDmp.co = 0;
+	mb->un.varDmp.resp_offset = 0;
+	pmb->context2 = ctx;
+	mb->mbxOwner = OWN_HOST;
+
+	return;
+}
+
+/**
  * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
@@ -58,7 +98,7 @@
 	MAILBOX_t *mb;
 	void *ctx;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	ctx = pmb->context2;
 
 	/* Setup to dump VPD region */
@@ -90,7 +130,7 @@
 	MAILBOX_t *mb;
 	void *ctx;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	/* Save context so that we can restore after memset */
 	ctx = pmb->context2;
 
@@ -125,7 +165,7 @@
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 	mb->mbxCommand = MBX_READ_NV;
 	mb->mbxOwner = OWN_HOST;
@@ -151,7 +191,7 @@
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 	mb->mbxCommand = MBX_ASYNCEVT_ENABLE;
 	mb->un.varCfgAsyncEvent.ring = ring;
@@ -177,7 +217,7 @@
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 	mb->mbxCommand = MBX_HEARTBEAT;
 	mb->mbxOwner = OWN_HOST;
@@ -211,7 +251,7 @@
 	struct lpfc_sli *psli;
 
 	psli = &phba->sli;
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	INIT_LIST_HEAD(&mp->list);
@@ -248,7 +288,7 @@
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->un.varClearLA.eventTag = phba->fc_eventTag;
@@ -275,7 +315,7 @@
 lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	struct lpfc_vport  *vport = phba->pport;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	/* NEW_FEATURE
@@ -321,7 +361,7 @@
 int
 lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	uint32_t attentionConditions[2];
 
 	/* Sanity check */
@@ -405,7 +445,7 @@
 	struct lpfc_sli *psli;
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	psli = &phba->sli;
@@ -492,7 +532,7 @@
 	struct lpfc_sli *psli;
 
 	psli = &phba->sli;
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->mbxOwner = OWN_HOST;
@@ -515,7 +555,7 @@
 	mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm);
 	mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys);
 	mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys);
-	mb->un.varRdSparm.vpi = vpi;
+	mb->un.varRdSparm.vpi = vpi + phba->vpi_base;
 
 	/* save address for completion */
 	pmb->context1 = mp;
@@ -544,10 +584,12 @@
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->un.varUnregDID.did = did;
+	if (vpi != 0xffff)
+		vpi += phba->vpi_base;
 	mb->un.varUnregDID.vpi = vpi;
 
 	mb->mbxCommand = MBX_UNREG_D_ID;
@@ -573,7 +615,7 @@
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->mbxCommand = MBX_READ_CONFIG;
@@ -598,7 +640,7 @@
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->mbxCommand = MBX_READ_LNK_STAT;
@@ -607,7 +649,7 @@
 }
 
 /**
- * lpfc_reg_login - Prepare a mailbox command for registering remote login
+ * lpfc_reg_rpi - Prepare a mailbox command for registering remote login
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @did: remote port identifier.
@@ -631,17 +673,23 @@
  *    1 - DMA memory allocation failed
  **/
 int
-lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
+lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
 	       uint8_t *param, LPFC_MBOXQ_t *pmb, uint32_t flag)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	uint8_t *sparam;
 	struct lpfc_dmabuf *mp;
 
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->un.varRegLogin.rpi = 0;
-	mb->un.varRegLogin.vpi = vpi;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		mb->un.varRegLogin.rpi = lpfc_sli4_alloc_rpi(phba);
+		if (mb->un.varRegLogin.rpi == LPFC_RPI_ALLOC_ERROR)
+			return 1;
+	}
+
+	mb->un.varRegLogin.vpi = vpi + phba->vpi_base;
 	mb->un.varRegLogin.did = did;
 	mb->un.varWords[30] = flag;	/* Set flag to issue action on cmpl */
 
@@ -697,15 +745,16 @@
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->un.varUnregLogin.rpi = (uint16_t) rpi;
 	mb->un.varUnregLogin.rsvd1 = 0;
-	mb->un.varUnregLogin.vpi = vpi;
+	mb->un.varUnregLogin.vpi = vpi + phba->vpi_base;
 
 	mb->mbxCommand = MBX_UNREG_LOGIN;
 	mb->mbxOwner = OWN_HOST;
+
 	return;
 }
 
@@ -725,15 +774,15 @@
  * This routine prepares the mailbox command for registering a virtual N_Port.
  **/
 void
-lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid,
-	     LPFC_MBOXQ_t *pmb)
+lpfc_reg_vpi(struct lpfc_vport *vport, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
-	mb->un.varRegVpi.vpi = vpi;
-	mb->un.varRegVpi.sid = sid;
+	mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base;
+	mb->un.varRegVpi.sid = vport->fc_myDID;
+	mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base;
 
 	mb->mbxCommand = MBX_REG_VPI;
 	mb->mbxOwner = OWN_HOST;
@@ -760,10 +809,10 @@
 void
 lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
-	mb->un.varUnregVpi.vpi = vpi;
+	mb->un.varUnregVpi.vpi = vpi + phba->vpi_base;
 
 	mb->mbxCommand = MBX_UNREG_VPI;
 	mb->mbxOwner = OWN_HOST;
@@ -852,7 +901,7 @@
 void
 lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 	mb->un.varRdRev.cv = 1;
 	mb->un.varRdRev.v3req = 1; /* Request SLI3 info */
@@ -945,7 +994,7 @@
 		uint32_t hbq_entry_index, LPFC_MBOXQ_t *pmb)
 {
 	int i;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct config_hbq_var *hbqmb = &mb->un.varCfgHbq;
 
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
@@ -1020,7 +1069,7 @@
 lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb)
 {
 	int i;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_sli *psli;
 	struct lpfc_sli_ring *pring;
 
@@ -1075,7 +1124,7 @@
 lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	MAILBOX_t __iomem *mb_slim = (MAILBOX_t __iomem *) phba->MBslimaddr;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	dma_addr_t pdma_addr;
 	uint32_t bar_low, bar_high;
 	size_t offset;
@@ -1099,21 +1148,22 @@
 
 	/* If HBA supports SLI=3 ask for it */
 
-	if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) {
+	if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) {
 		if (phba->cfg_enable_bg)
 			mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */
+		mb->un.varCfgPort.cdss = 1; /* Configure Security */
 		mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
 		mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
 		mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */
 		mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();
 		if (phba->max_vpi && phba->cfg_enable_npiv &&
 		    phba->vpd.sli3Feat.cmv) {
-			mb->un.varCfgPort.max_vpi = phba->max_vpi;
+			mb->un.varCfgPort.max_vpi = LPFC_MAX_VPI;
 			mb->un.varCfgPort.cmv = 1;
 		} else
 			mb->un.varCfgPort.max_vpi = phba->max_vpi = 0;
 	} else
-		phba->sli_rev = 2;
+		phba->sli_rev = LPFC_SLI_REV2;
 	mb->un.varCfgPort.sli_mode = phba->sli_rev;
 
 	/* Now setup pcb */
@@ -1245,7 +1295,7 @@
 void
 lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 
 	memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
 	mb->mbxCommand = MBX_KILL_BOARD;
@@ -1305,29 +1355,98 @@
 }
 
 /**
+ * __lpfc_mbox_cmpl_put - Put mailbox cmd into mailbox cmd complete list
+ * @phba: pointer to lpfc hba data structure.
+ * @mbq: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine put the completed mailbox command into the mailbox command
+ * complete list. This is the unlocked version of the routine. The mailbox
+ * complete list is used by the driver worker thread to process mailbox
+ * complete callback functions outside the driver interrupt handler.
+ **/
+void
+__lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq)
+{
+	list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
+}
+
+/**
  * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list
  * @phba: pointer to lpfc hba data structure.
  * @mbq: pointer to the driver internal queue element for mailbox command.
  *
  * This routine put the completed mailbox command into the mailbox command
- * complete list. This routine is called from driver interrupt handler
- * context.The mailbox complete list is used by the driver worker thread
- * to process mailbox complete callback functions outside the driver interrupt
- * handler.
+ * complete list. This is the locked version of the routine. The mailbox
+ * complete list is used by the driver worker thread to process mailbox
+ * complete callback functions outside the driver interrupt handler.
  **/
 void
-lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
+lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq)
 {
 	unsigned long iflag;
 
 	/* This function expects to be called from interrupt context */
 	spin_lock_irqsave(&phba->hbalock, iflag);
-	list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
+	__lpfc_mbox_cmpl_put(phba, mbq);
 	spin_unlock_irqrestore(&phba->hbalock, iflag);
 	return;
 }
 
 /**
+ * lpfc_mbox_cmd_check - Check the validality of a mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine is to check whether a mailbox command is valid to be issued.
+ * This check will be performed by both the mailbox issue API when a client
+ * is to issue a mailbox command to the mailbox transport.
+ *
+ * Return 0 - pass the check, -ENODEV - fail the check
+ **/
+int
+lpfc_mbox_cmd_check(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	/* Mailbox command that have a completion handler must also have a
+	 * vport specified.
+	 */
+	if (mboxq->mbox_cmpl && mboxq->mbox_cmpl != lpfc_sli_def_mbox_cmpl &&
+	    mboxq->mbox_cmpl != lpfc_sli_wake_mbox_wait) {
+		if (!mboxq->vport) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_VPORT,
+					"1814 Mbox x%x failed, no vport\n",
+					mboxq->u.mb.mbxCommand);
+			dump_stack();
+			return -ENODEV;
+		}
+	}
+	return 0;
+}
+
+/**
+ * lpfc_mbox_dev_check - Check the device state for issuing a mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to check whether the HBA device is ready for posting a
+ * mailbox command. It is used by the mailbox transport API at the time the
+ * to post a mailbox command to the device.
+ *
+ * Return 0 - pass the check, -ENODEV - fail the check
+ **/
+int
+lpfc_mbox_dev_check(struct lpfc_hba *phba)
+{
+	/* If the PCI channel is in offline state, do not issue mbox */
+	if (unlikely(pci_channel_offline(phba->pcidev)))
+		return -ENODEV;
+
+	/* If the HBA is in error state, do not issue mbox */
+	if (phba->link_state == LPFC_HBA_ERROR)
+		return -ENODEV;
+
+	return 0;
+}
+
+/**
  * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
  * @phba: pointer to lpfc hba data structure.
  * @cmd: mailbox command code.
@@ -1350,6 +1469,475 @@
 	case MBX_WRITE_WWN:     /* 0x98 */
 	case MBX_LOAD_EXP_ROM:	/* 0x9C */
 		return LPFC_MBOX_TMO_FLASH_CMD;
+	case MBX_SLI4_CONFIG:	/* 0x9b */
+		return LPFC_MBOX_SLI4_CONFIG_TMO;
 	}
 	return LPFC_MBOX_TMO;
 }
+
+/**
+ * lpfc_sli4_mbx_sge_set - Set a sge entry in non-embedded mailbox command
+ * @mbox: pointer to lpfc mbox command.
+ * @sgentry: sge entry index.
+ * @phyaddr: physical address for the sge
+ * @length: Length of the sge.
+ *
+ * This routine sets up an entry in the non-embedded mailbox command at the sge
+ * index location.
+ **/
+void
+lpfc_sli4_mbx_sge_set(struct lpfcMboxq *mbox, uint32_t sgentry,
+		      dma_addr_t phyaddr, uint32_t length)
+{
+	struct lpfc_mbx_nembed_cmd *nembed_sge;
+
+	nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+				&mbox->u.mqe.un.nembed_cmd;
+	nembed_sge->sge[sgentry].pa_lo = putPaddrLow(phyaddr);
+	nembed_sge->sge[sgentry].pa_hi = putPaddrHigh(phyaddr);
+	nembed_sge->sge[sgentry].length = length;
+}
+
+/**
+ * lpfc_sli4_mbx_sge_get - Get a sge entry from non-embedded mailbox command
+ * @mbox: pointer to lpfc mbox command.
+ * @sgentry: sge entry index.
+ *
+ * This routine gets an entry from the non-embedded mailbox command at the sge
+ * index location.
+ **/
+void
+lpfc_sli4_mbx_sge_get(struct lpfcMboxq *mbox, uint32_t sgentry,
+		      struct lpfc_mbx_sge *sge)
+{
+	struct lpfc_mbx_nembed_cmd *nembed_sge;
+
+	nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+				&mbox->u.mqe.un.nembed_cmd;
+	sge->pa_lo = nembed_sge->sge[sgentry].pa_lo;
+	sge->pa_hi = nembed_sge->sge[sgentry].pa_hi;
+	sge->length = nembed_sge->sge[sgentry].length;
+}
+
+/**
+ * lpfc_sli4_mbox_cmd_free - Free a sli4 mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ *
+ * This routine frees SLI4 specific mailbox command for sending IOCTL command.
+ **/
+void
+lpfc_sli4_mbox_cmd_free(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+	struct lpfc_mbx_sli4_config *sli4_cfg;
+	struct lpfc_mbx_sge sge;
+	dma_addr_t phyaddr;
+	uint32_t sgecount, sgentry;
+
+	sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+	/* For embedded mbox command, just free the mbox command */
+	if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return;
+	}
+
+	/* For non-embedded mbox command, we need to free the pages first */
+	sgecount = bf_get(lpfc_mbox_hdr_sge_cnt, &sli4_cfg->header.cfg_mhdr);
+	/* There is nothing we can do if there is no sge address array */
+	if (unlikely(!mbox->sge_array)) {
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return;
+	}
+	/* Each non-embedded DMA memory was allocated in the length of a page */
+	for (sgentry = 0; sgentry < sgecount; sgentry++) {
+		lpfc_sli4_mbx_sge_get(mbox, sgentry, &sge);
+		phyaddr = getPaddr(sge.pa_hi, sge.pa_lo);
+		dma_free_coherent(&phba->pcidev->dev, PAGE_SIZE,
+				  mbox->sge_array->addr[sgentry], phyaddr);
+	}
+	/* Free the sge address array memory */
+	kfree(mbox->sge_array);
+	/* Finally, free the mailbox command itself */
+	mempool_free(mbox, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_config - Initialize the  SLI4 Config Mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ * @subsystem: The sli4 config sub mailbox subsystem.
+ * @opcode: The sli4 config sub mailbox command opcode.
+ * @length: Length of the sli4 config mailbox command.
+ *
+ * This routine sets up the header fields of SLI4 specific mailbox command
+ * for sending IOCTL command.
+ *
+ * Return: the actual length of the mbox command allocated (mostly useful
+ *         for none embedded mailbox command).
+ **/
+int
+lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
+		 uint8_t subsystem, uint8_t opcode, uint32_t length, bool emb)
+{
+	struct lpfc_mbx_sli4_config *sli4_config;
+	union lpfc_sli4_cfg_shdr *cfg_shdr = NULL;
+	uint32_t alloc_len;
+	uint32_t resid_len;
+	uint32_t pagen, pcount;
+	void *viraddr;
+	dma_addr_t phyaddr;
+
+	/* Set up SLI4 mailbox command header fields */
+	memset(mbox, 0, sizeof(*mbox));
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_SLI4_CONFIG);
+
+	/* Set up SLI4 ioctl command header fields */
+	sli4_config = &mbox->u.mqe.un.sli4_config;
+
+	/* Setup for the embedded mbox command */
+	if (emb) {
+		/* Set up main header fields */
+		bf_set(lpfc_mbox_hdr_emb, &sli4_config->header.cfg_mhdr, 1);
+		sli4_config->header.cfg_mhdr.payload_length =
+					LPFC_MBX_CMD_HDR_LENGTH + length;
+		/* Set up sub-header fields following main header */
+		bf_set(lpfc_mbox_hdr_opcode,
+			&sli4_config->header.cfg_shdr.request, opcode);
+		bf_set(lpfc_mbox_hdr_subsystem,
+			&sli4_config->header.cfg_shdr.request, subsystem);
+		sli4_config->header.cfg_shdr.request.request_length = length;
+		return length;
+	}
+
+	/* Setup for the none-embedded mbox command */
+	pcount = (PAGE_ALIGN(length))/PAGE_SIZE;
+	pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ?
+				LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount;
+	/* Allocate record for keeping SGE virtual addresses */
+	mbox->sge_array = kmalloc(sizeof(struct lpfc_mbx_nembed_sge_virt),
+				  GFP_KERNEL);
+	if (!mbox->sge_array)
+		return 0;
+
+	for (pagen = 0, alloc_len = 0; pagen < pcount; pagen++) {
+		/* The DMA memory is always allocated in the length of a
+		 * page even though the last SGE might not fill up to a
+		 * page, this is used as a priori size of PAGE_SIZE for
+		 * the later DMA memory free.
+		 */
+		viraddr = dma_alloc_coherent(&phba->pcidev->dev, PAGE_SIZE,
+					     &phyaddr, GFP_KERNEL);
+		/* In case of malloc fails, proceed with whatever we have */
+		if (!viraddr)
+			break;
+		mbox->sge_array->addr[pagen] = viraddr;
+		/* Keep the first page for later sub-header construction */
+		if (pagen == 0)
+			cfg_shdr = (union lpfc_sli4_cfg_shdr *)viraddr;
+		resid_len = length - alloc_len;
+		if (resid_len > PAGE_SIZE) {
+			lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr,
+					      PAGE_SIZE);
+			alloc_len += PAGE_SIZE;
+		} else {
+			lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr,
+					      resid_len);
+			alloc_len = length;
+		}
+	}
+
+	/* Set up main header fields in mailbox command */
+	sli4_config->header.cfg_mhdr.payload_length = alloc_len;
+	bf_set(lpfc_mbox_hdr_sge_cnt, &sli4_config->header.cfg_mhdr, pagen);
+
+	/* Set up sub-header fields into the first page */
+	if (pagen > 0) {
+		bf_set(lpfc_mbox_hdr_opcode, &cfg_shdr->request, opcode);
+		bf_set(lpfc_mbox_hdr_subsystem, &cfg_shdr->request, subsystem);
+		cfg_shdr->request.request_length =
+				alloc_len - sizeof(union  lpfc_sli4_cfg_shdr);
+	}
+	/* The sub-header is in DMA memory, which needs endian converstion */
+	lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr,
+			      sizeof(union  lpfc_sli4_cfg_shdr));
+
+	return alloc_len;
+}
+
+/**
+ * lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ *
+ * This routine gets the opcode from a SLI4 specific mailbox command for
+ * sending IOCTL command. If the mailbox command is not MBX_SLI4_CONFIG
+ * (0x9B) or if the IOCTL sub-header is not present, opcode 0x0 shall be
+ * returned.
+ **/
+uint8_t
+lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+	struct lpfc_mbx_sli4_config *sli4_cfg;
+	union lpfc_sli4_cfg_shdr *cfg_shdr;
+
+	if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG)
+		return 0;
+	sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+	/* For embedded mbox command, get opcode from embedded sub-header*/
+	if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+		cfg_shdr = &mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+		return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
+	}
+
+	/* For non-embedded mbox command, get opcode from first dma page */
+	if (unlikely(!mbox->sge_array))
+		return 0;
+	cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0];
+	return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
+}
+
+/**
+ * lpfc_request_features: Configure SLI4 REQUEST_FEATURES mailbox
+ * @mboxq: pointer to lpfc mbox command.
+ *
+ * This routine sets up the mailbox for an SLI4 REQUEST_FEATURES
+ * mailbox command.
+ **/
+void
+lpfc_request_features(struct lpfc_hba *phba, struct lpfcMboxq *mboxq)
+{
+	/* Set up SLI4 mailbox command header fields */
+	memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+	bf_set(lpfc_mqe_command, &mboxq->u.mqe, MBX_SLI4_REQ_FTRS);
+
+	/* Set up host requested features. */
+	bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1);
+
+	/* Virtual fabrics and FIPs are not supported yet. */
+	bf_set(lpfc_mbx_rq_ftr_rq_ifip, &mboxq->u.mqe.un.req_ftrs, 0);
+
+	/* Enable DIF (block guard) only if configured to do so. */
+	if (phba->cfg_enable_bg)
+		bf_set(lpfc_mbx_rq_ftr_rq_dif, &mboxq->u.mqe.un.req_ftrs, 1);
+
+	/* Enable NPIV only if configured to do so. */
+	if (phba->max_vpi && phba->cfg_enable_npiv)
+		bf_set(lpfc_mbx_rq_ftr_rq_npiv, &mboxq->u.mqe.un.req_ftrs, 1);
+
+	return;
+}
+
+/**
+ * lpfc_init_vfi - Initialize the INIT_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vport: Vport associated with the VF.
+ *
+ * This routine initializes @mbox to all zeros and then fills in the mailbox
+ * fields from @vport. INIT_VFI configures virtual fabrics identified by VFI
+ * in the context of an FCF. The driver issues this command to setup a VFI
+ * before issuing a FLOGI to login to the VSAN. The driver should also issue a
+ * REG_VFI after a successful VSAN login.
+ **/
+void
+lpfc_init_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport)
+{
+	struct lpfc_mbx_init_vfi *init_vfi;
+
+	memset(mbox, 0, sizeof(*mbox));
+	init_vfi = &mbox->u.mqe.un.init_vfi;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VFI);
+	bf_set(lpfc_init_vfi_vr, init_vfi, 1);
+	bf_set(lpfc_init_vfi_vt, init_vfi, 1);
+	bf_set(lpfc_init_vfi_vfi, init_vfi, vport->vfi + vport->phba->vfi_base);
+	bf_set(lpfc_init_vfi_fcfi, init_vfi, vport->phba->fcf.fcfi);
+}
+
+/**
+ * lpfc_reg_vfi - Initialize the REG_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vport: vport associated with the VF.
+ * @phys: BDE DMA bus address used to send the service parameters to the HBA.
+ *
+ * This routine initializes @mbox to all zeros and then fills in the mailbox
+ * fields from @vport, and uses @buf as a DMAable buffer to send the vport's
+ * fc service parameters to the HBA for this VFI. REG_VFI configures virtual
+ * fabrics identified by VFI in the context of an FCF.
+ **/
+void
+lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys)
+{
+	struct lpfc_mbx_reg_vfi *reg_vfi;
+
+	memset(mbox, 0, sizeof(*mbox));
+	reg_vfi = &mbox->u.mqe.un.reg_vfi;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_VFI);
+	bf_set(lpfc_reg_vfi_vp, reg_vfi, 1);
+	bf_set(lpfc_reg_vfi_vfi, reg_vfi, vport->vfi + vport->phba->vfi_base);
+	bf_set(lpfc_reg_vfi_fcfi, reg_vfi, vport->phba->fcf.fcfi);
+	bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->vpi + vport->phba->vpi_base);
+	reg_vfi->bde.addrHigh = putPaddrHigh(phys);
+	reg_vfi->bde.addrLow = putPaddrLow(phys);
+	reg_vfi->bde.tus.f.bdeSize = sizeof(vport->fc_sparam);
+	reg_vfi->bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+	bf_set(lpfc_reg_vfi_nport_id, reg_vfi, vport->fc_myDID);
+}
+
+/**
+ * lpfc_init_vpi - Initialize the INIT_VPI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vpi: VPI to be initialized.
+ *
+ * The INIT_VPI mailbox command supports virtual N_Ports. The driver uses the
+ * command to activate a virtual N_Port. The HBA assigns a MAC address to use
+ * with the virtual N Port.  The SLI Host issues this command before issuing a
+ * FDISC to connect to the Fabric. The SLI Host should issue a REG_VPI after a
+ * successful virtual NPort login.
+ **/
+void
+lpfc_init_vpi(struct lpfcMboxq *mbox, uint16_t vpi)
+{
+	memset(mbox, 0, sizeof(*mbox));
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VPI);
+	bf_set(lpfc_init_vpi_vpi, &mbox->u.mqe.un.init_vpi, vpi);
+}
+
+/**
+ * lpfc_unreg_vfi - Initialize the UNREG_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vfi: VFI to be unregistered.
+ *
+ * The UNREG_VFI mailbox command causes the SLI Host to put a virtual fabric
+ * (logical NPort) into the inactive state. The SLI Host must have logged out
+ * and unregistered all remote N_Ports to abort any activity on the virtual
+ * fabric. The SLI Port posts the mailbox response after marking the virtual
+ * fabric inactive.
+ **/
+void
+lpfc_unreg_vfi(struct lpfcMboxq *mbox, uint16_t vfi)
+{
+	memset(mbox, 0, sizeof(*mbox));
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI);
+	bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi, vfi);
+}
+
+/**
+ * lpfc_dump_fcoe_param - Dump config region 23 to get FCoe parameters.
+ * @phba: pointer to the hba structure containing.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * This function create a SLI4 dump mailbox command to dump FCoE
+ * parameters stored in region 23.
+ **/
+int
+lpfc_dump_fcoe_param(struct lpfc_hba *phba,
+		struct lpfcMboxq *mbox)
+{
+	struct lpfc_dmabuf *mp = NULL;
+	MAILBOX_t *mb;
+
+	memset(mbox, 0, sizeof(*mbox));
+	mb = &mbox->u.mb;
+
+	mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (mp)
+		mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+
+	if (!mp || !mp->virt) {
+		kfree(mp);
+		/* dump_fcoe_param failed to allocate memory */
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
+			"2569 lpfc_dump_fcoe_param: memory"
+			" allocation failed \n");
+		return 1;
+	}
+
+	memset(mp->virt, 0, LPFC_BPL_SIZE);
+	INIT_LIST_HEAD(&mp->list);
+
+	/* save address for completion */
+	mbox->context1 = (uint8_t *) mp;
+
+	mb->mbxCommand = MBX_DUMP_MEMORY;
+	mb->un.varDmp.type = DMP_NV_PARAMS;
+	mb->un.varDmp.region_id = DMP_REGION_FCOEPARAM;
+	mb->un.varDmp.sli4_length = DMP_FCOEPARAM_RGN_SIZE;
+	mb->un.varWords[3] = putPaddrLow(mp->phys);
+	mb->un.varWords[4] = putPaddrHigh(mp->phys);
+	return 0;
+}
+
+/**
+ * lpfc_reg_fcfi - Initialize the REG_FCFI mailbox command
+ * @phba: pointer to the hba structure containing the FCF index and RQ ID.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * The REG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs). The
+ * SLI Host uses the command to activate an FCF after it has acquired FCF
+ * information via a READ_FCF mailbox command. This mailbox command also is used
+ * to indicate where received unsolicited frames from this FCF will be sent. By
+ * default this routine will set up the FCF to forward all unsolicited frames
+ * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * more complicated setups.
+ **/
+void
+lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+	struct lpfc_mbx_reg_fcfi *reg_fcfi;
+
+	memset(mbox, 0, sizeof(*mbox));
+	reg_fcfi = &mbox->u.mqe.un.reg_fcfi;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_FCFI);
+	bf_set(lpfc_reg_fcfi_rq_id0, reg_fcfi, phba->sli4_hba.hdr_rq->queue_id);
+	bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, REG_FCF_INVALID_QID);
+	bf_set(lpfc_reg_fcfi_rq_id2, reg_fcfi, REG_FCF_INVALID_QID);
+	bf_set(lpfc_reg_fcfi_rq_id3, reg_fcfi, REG_FCF_INVALID_QID);
+	bf_set(lpfc_reg_fcfi_info_index, reg_fcfi, phba->fcf.fcf_indx);
+	/* reg_fcf addr mode is bit wise inverted value of fcf addr_mode */
+	bf_set(lpfc_reg_fcfi_mam, reg_fcfi,
+		(~phba->fcf.addr_mode) & 0x3);
+	if (phba->fcf.fcf_flag & FCF_VALID_VLAN) {
+		bf_set(lpfc_reg_fcfi_vv, reg_fcfi, 1);
+		bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi, phba->fcf.vlan_id);
+	}
+}
+
+/**
+ * lpfc_unreg_fcfi - Initialize the UNREG_FCFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @fcfi: FCFI to be unregistered.
+ *
+ * The UNREG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs).
+ * The SLI Host uses the command to inactivate an FCFI.
+ **/
+void
+lpfc_unreg_fcfi(struct lpfcMboxq *mbox, uint16_t fcfi)
+{
+	memset(mbox, 0, sizeof(*mbox));
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_FCFI);
+	bf_set(lpfc_unreg_fcfi, &mbox->u.mqe.un.unreg_fcfi, fcfi);
+}
+
+/**
+ * lpfc_resume_rpi - Initialize the RESUME_RPI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @ndlp: The nodelist structure that describes the RPI to resume.
+ *
+ * The RESUME_RPI mailbox command is used to restart I/O to an RPI after a
+ * link event.
+ **/
+void
+lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp)
+{
+	struct lpfc_mbx_resume_rpi *resume_rpi;
+
+	memset(mbox, 0, sizeof(*mbox));
+	resume_rpi = &mbox->u.mqe.un.resume_rpi;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_RESUME_RPI);
+	bf_set(lpfc_resume_rpi_rpi, resume_rpi, ndlp->nlp_rpi);
+	bf_set(lpfc_resume_rpi_vpi, resume_rpi,
+	       ndlp->vport->vpi + ndlp->vport->phba->vpi_base);
+	bf_set(lpfc_resume_rpi_vfi, resume_rpi,
+	       ndlp->vport->vfi + ndlp->vport->phba->vfi_base);
+}
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 35a9767..e198c91 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -28,8 +28,10 @@
 
 #include <scsi/scsi.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -45,7 +47,7 @@
  * @phba: HBA to allocate pools for
  *
  * Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
- * lpfc_mbuf_pool, lpfc_hbq_pool.  Creates and allocates kmalloc-backed mempools
+ * lpfc_mbuf_pool, lpfc_hrb_pool.  Creates and allocates kmalloc-backed mempools
  * for LPFC_MBOXQ_t and lpfc_nodelist.  Also allocates the VPI bitmask.
  *
  * Notes: Not interrupt-safe.  Must be called with no locks held.  If any
@@ -56,19 +58,30 @@
  *   -ENOMEM on failure (if any memory allocations fail)
  **/
 int
-lpfc_mem_alloc(struct lpfc_hba * phba)
+lpfc_mem_alloc(struct lpfc_hba *phba, int align)
 {
 	struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
 	int longs;
 	int i;
 
-	phba->lpfc_scsi_dma_buf_pool = pci_pool_create("lpfc_scsi_dma_buf_pool",
-				phba->pcidev, phba->cfg_sg_dma_buf_size, 8, 0);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->lpfc_scsi_dma_buf_pool =
+			pci_pool_create("lpfc_scsi_dma_buf_pool",
+				phba->pcidev,
+				phba->cfg_sg_dma_buf_size,
+				phba->cfg_sg_dma_buf_size,
+				0);
+	else
+		phba->lpfc_scsi_dma_buf_pool =
+			pci_pool_create("lpfc_scsi_dma_buf_pool",
+				phba->pcidev, phba->cfg_sg_dma_buf_size,
+				align, 0);
 	if (!phba->lpfc_scsi_dma_buf_pool)
 		goto fail;
 
 	phba->lpfc_mbuf_pool = pci_pool_create("lpfc_mbuf_pool", phba->pcidev,
-							LPFC_BPL_SIZE, 8,0);
+							LPFC_BPL_SIZE,
+							align, 0);
 	if (!phba->lpfc_mbuf_pool)
 		goto fail_free_dma_buf_pool;
 
@@ -97,23 +110,31 @@
 						sizeof(struct lpfc_nodelist));
 	if (!phba->nlp_mem_pool)
 		goto fail_free_mbox_pool;
-
-	phba->lpfc_hbq_pool = pci_pool_create("lpfc_hbq_pool",phba->pcidev,
-					      LPFC_BPL_SIZE, 8, 0);
-	if (!phba->lpfc_hbq_pool)
+	phba->lpfc_hrb_pool = pci_pool_create("lpfc_hrb_pool",
+					      phba->pcidev,
+					      LPFC_HDR_BUF_SIZE, align, 0);
+	if (!phba->lpfc_hrb_pool)
 		goto fail_free_nlp_mem_pool;
+	phba->lpfc_drb_pool = pci_pool_create("lpfc_drb_pool",
+					      phba->pcidev,
+					      LPFC_DATA_BUF_SIZE, align, 0);
+	if (!phba->lpfc_drb_pool)
+		goto fail_free_hbq_pool;
 
 	/* vpi zero is reserved for the physical port so add 1 to max */
 	longs = ((phba->max_vpi + 1) + BITS_PER_LONG - 1) / BITS_PER_LONG;
 	phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long), GFP_KERNEL);
 	if (!phba->vpi_bmask)
-		goto fail_free_hbq_pool;
+		goto fail_free_dbq_pool;
 
 	return 0;
 
+ fail_free_dbq_pool:
+	pci_pool_destroy(phba->lpfc_drb_pool);
+	phba->lpfc_drb_pool = NULL;
  fail_free_hbq_pool:
-	lpfc_sli_hbqbuf_free_all(phba);
-	pci_pool_destroy(phba->lpfc_hbq_pool);
+	pci_pool_destroy(phba->lpfc_hrb_pool);
+	phba->lpfc_hrb_pool = NULL;
  fail_free_nlp_mem_pool:
 	mempool_destroy(phba->nlp_mem_pool);
 	phba->nlp_mem_pool = NULL;
@@ -136,27 +157,73 @@
 }
 
 /**
- * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees memory allocated by lpfc_mem_alloc
  * @phba: HBA to free memory for
  *
- * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
- * lpfc_hbq_pool.  Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist.  Also frees the VPI bitmask
+ * Description: Free the memory allocated by lpfc_mem_alloc routine. This
+ * routine is a the counterpart of lpfc_mem_alloc.
  *
  * Returns: None
  **/
 void
-lpfc_mem_free(struct lpfc_hba * phba)
+lpfc_mem_free(struct lpfc_hba *phba)
+{
+	int i;
+	struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
+
+	/* Free VPI bitmask memory */
+	kfree(phba->vpi_bmask);
+
+	/* Free HBQ pools */
+	lpfc_sli_hbqbuf_free_all(phba);
+	pci_pool_destroy(phba->lpfc_drb_pool);
+	phba->lpfc_drb_pool = NULL;
+	pci_pool_destroy(phba->lpfc_hrb_pool);
+	phba->lpfc_hrb_pool = NULL;
+
+	/* Free NLP memory pool */
+	mempool_destroy(phba->nlp_mem_pool);
+	phba->nlp_mem_pool = NULL;
+
+	/* Free mbox memory pool */
+	mempool_destroy(phba->mbox_mem_pool);
+	phba->mbox_mem_pool = NULL;
+
+	/* Free MBUF memory pool */
+	for (i = 0; i < pool->current_count; i++)
+		pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
+			      pool->elements[i].phys);
+	kfree(pool->elements);
+
+	pci_pool_destroy(phba->lpfc_mbuf_pool);
+	phba->lpfc_mbuf_pool = NULL;
+
+	/* Free DMA buffer memory pool */
+	pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
+	phba->lpfc_scsi_dma_buf_pool = NULL;
+
+	return;
+}
+
+/**
+ * lpfc_mem_free_all - Frees all PCI and driver memory
+ * @phba: HBA to free memory for
+ *
+ * Description: Free memory from PCI and driver memory pools and also those
+ * used : lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, lpfc_hrb_pool. Frees
+ * kmalloc-backed mempools for LPFC_MBOXQ_t and lpfc_nodelist. Also frees
+ * the VPI bitmask.
+ *
+ * Returns: None
+ **/
+void
+lpfc_mem_free_all(struct lpfc_hba *phba)
 {
 	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
 	LPFC_MBOXQ_t *mbox, *next_mbox;
 	struct lpfc_dmabuf   *mp;
-	int i;
 
-	kfree(phba->vpi_bmask);
-	lpfc_sli_hbqbuf_free_all(phba);
-
+	/* Free memory used in mailbox queue back to mailbox memory pool */
 	list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq, list) {
 		mp = (struct lpfc_dmabuf *) (mbox->context1);
 		if (mp) {
@@ -166,6 +233,7 @@
 		list_del(&mbox->list);
 		mempool_free(mbox, phba->mbox_mem_pool);
 	}
+	/* Free memory used in mailbox cmpl list back to mailbox memory pool */
 	list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq_cmpl, list) {
 		mp = (struct lpfc_dmabuf *) (mbox->context1);
 		if (mp) {
@@ -175,8 +243,10 @@
 		list_del(&mbox->list);
 		mempool_free(mbox, phba->mbox_mem_pool);
 	}
-
+	/* Free the active mailbox command back to the mailbox memory pool */
+	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	spin_unlock_irq(&phba->hbalock);
 	if (psli->mbox_active) {
 		mbox = psli->mbox_active;
 		mp = (struct lpfc_dmabuf *) (mbox->context1);
@@ -188,27 +258,14 @@
 		psli->mbox_active = NULL;
 	}
 
-	for (i = 0; i < pool->current_count; i++)
-		pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
-						 pool->elements[i].phys);
-	kfree(pool->elements);
-
-	pci_pool_destroy(phba->lpfc_hbq_pool);
-	mempool_destroy(phba->nlp_mem_pool);
-	mempool_destroy(phba->mbox_mem_pool);
-
-	pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
-	pci_pool_destroy(phba->lpfc_mbuf_pool);
-
-	phba->lpfc_hbq_pool = NULL;
-	phba->nlp_mem_pool = NULL;
-	phba->mbox_mem_pool = NULL;
-	phba->lpfc_scsi_dma_buf_pool = NULL;
-	phba->lpfc_mbuf_pool = NULL;
+	/* Free and destroy all the allocated memory pools */
+	lpfc_mem_free(phba);
 
 	/* Free the iocb lookup array */
 	kfree(psli->iocbq_lookup);
 	psli->iocbq_lookup = NULL;
+
+	return;
 }
 
 /**
@@ -305,7 +362,7 @@
  * lpfc_els_hbq_alloc - Allocate an HBQ buffer
  * @phba: HBA to allocate HBQ buffer for
  *
- * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
+ * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hrb_pool PCI
  * pool along a non-DMA-mapped container for it.
  *
  * Notes: Not interrupt-safe.  Must be called with no locks held.
@@ -323,7 +380,7 @@
 	if (!hbqbp)
 		return NULL;
 
-	hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hbq_pool, GFP_KERNEL,
+	hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
 					  &hbqbp->dbuf.phys);
 	if (!hbqbp->dbuf.virt) {
 		kfree(hbqbp);
@@ -334,7 +391,7 @@
 }
 
 /**
- * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_els_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
  * @phba: HBA buffer was allocated for
  * @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
  *
@@ -348,12 +405,73 @@
 void
 lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp)
 {
-	pci_pool_free(phba->lpfc_hbq_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
+	pci_pool_free(phba->lpfc_hrb_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
 	kfree(hbqbp);
 	return;
 }
 
 /**
+ * lpfc_sli4_rb_alloc - Allocate an SLI4 Receive buffer
+ * @phba: HBA to allocate a receive buffer for
+ *
+ * Description: Allocates a DMA-mapped receive buffer from the lpfc_hrb_pool PCI
+ * pool along a non-DMA-mapped container for it.
+ *
+ * Notes: Not interrupt-safe.  Must be called with no locks held.
+ *
+ * Returns:
+ *   pointer to HBQ on success
+ *   NULL on failure
+ **/
+struct hbq_dmabuf *
+lpfc_sli4_rb_alloc(struct lpfc_hba *phba)
+{
+	struct hbq_dmabuf *dma_buf;
+
+	dma_buf = kmalloc(sizeof(struct hbq_dmabuf), GFP_KERNEL);
+	if (!dma_buf)
+		return NULL;
+
+	dma_buf->hbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
+					    &dma_buf->hbuf.phys);
+	if (!dma_buf->hbuf.virt) {
+		kfree(dma_buf);
+		return NULL;
+	}
+	dma_buf->dbuf.virt = pci_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
+					    &dma_buf->dbuf.phys);
+	if (!dma_buf->dbuf.virt) {
+		pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
+			      dma_buf->hbuf.phys);
+		kfree(dma_buf);
+		return NULL;
+	}
+	dma_buf->size = LPFC_BPL_SIZE;
+	return dma_buf;
+}
+
+/**
+ * lpfc_sli4_rb_free - Frees a receive buffer
+ * @phba: HBA buffer was allocated for
+ * @dmab: DMA Buffer container returned by lpfc_sli4_hbq_alloc
+ *
+ * Description: Frees both the container and the DMA-mapped buffers returned by
+ * lpfc_sli4_rb_alloc.
+ *
+ * Notes: Can be called with or without locks held.
+ *
+ * Returns: None
+ **/
+void
+lpfc_sli4_rb_free(struct lpfc_hba *phba, struct hbq_dmabuf *dmab)
+{
+	pci_pool_free(phba->lpfc_hrb_pool, dmab->hbuf.virt, dmab->hbuf.phys);
+	pci_pool_free(phba->lpfc_drb_pool, dmab->dbuf.virt, dmab->dbuf.phys);
+	kfree(dmab);
+	return;
+}
+
+/**
  * lpfc_in_buf_free - Free a DMA buffer
  * @phba: HBA buffer is associated with
  * @mp: Buffer to free
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 08cdc77..09f659f 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1,7 +1,7 @@
  /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -28,8 +28,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -361,7 +363,7 @@
 	if (!mbox)
 		goto out;
 
-	rc = lpfc_reg_login(phba, vport->vpi, icmd->un.rcvels.remoteID,
+	rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID,
 			    (uint8_t *) sp, mbox, 0);
 	if (rc) {
 		mempool_free(mbox, phba->mbox_mem_pool);
@@ -495,11 +497,19 @@
 		lpfc_els_rsp_acc(vport, ELS_CMD_PRLO, cmdiocb, ndlp, NULL);
 	else
 		lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
+	if ((ndlp->nlp_type & NLP_FABRIC) &&
+		vport->port_type == LPFC_NPIV_PORT) {
+		lpfc_linkdown_port(vport);
+		mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
+		spin_lock_irq(shost->host_lock);
+		ndlp->nlp_flag |= NLP_DELAY_TMO;
+		spin_unlock_irq(shost->host_lock);
 
-	if ((!(ndlp->nlp_type & NLP_FABRIC) &&
-	     ((ndlp->nlp_type & NLP_FCP_TARGET) ||
-	      !(ndlp->nlp_type & NLP_FCP_INITIATOR))) ||
-	    (ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
+		ndlp->nlp_last_elscmd = ELS_CMD_FDISC;
+	} else if ((!(ndlp->nlp_type & NLP_FABRIC) &&
+		((ndlp->nlp_type & NLP_FCP_TARGET) ||
+		!(ndlp->nlp_type & NLP_FCP_INITIATOR))) ||
+		(ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
 		/* Only try to re-login if this is NOT a Fabric Node */
 		mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
 		spin_lock_irq(shost->host_lock);
@@ -567,7 +577,7 @@
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 
-	if (!ndlp->nlp_rpi) {
+	if (!(ndlp->nlp_flag & NLP_RPI_VALID)) {
 		ndlp->nlp_flag &= ~NLP_NPR_ADISC;
 		return 0;
 	}
@@ -857,7 +867,7 @@
 
 	lpfc_unreg_rpi(vport, ndlp);
 
-	if (lpfc_reg_login(phba, vport->vpi, irsp->un.elsreq64.remoteID,
+	if (lpfc_reg_rpi(phba, vport->vpi, irsp->un.elsreq64.remoteID,
 			   (uint8_t *) sp, mbox, 0) == 0) {
 		switch (ndlp->nlp_DID) {
 		case NameServer_DID:
@@ -1068,6 +1078,7 @@
 	struct lpfc_iocbq *cmdiocb, *rspiocb;
 	IOCB_t *irsp;
 	ADISC *ap;
+	int rc;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 	rspiocb = cmdiocb->context_un.rsp_iocb;
@@ -1093,6 +1104,15 @@
 		return ndlp->nlp_state;
 	}
 
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rc = lpfc_sli4_resume_rpi(ndlp);
+		if (rc) {
+			/* Stay in state and retry. */
+			ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
+			return ndlp->nlp_state;
+		}
+	}
+
 	if (ndlp->nlp_type & NLP_FCP_TARGET) {
 		ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
 		lpfc_nlp_set_state(vport, ndlp, NLP_STE_MAPPED_NODE);
@@ -1100,6 +1120,7 @@
 		ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
 		lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 	}
+
 	return ndlp->nlp_state;
 }
 
@@ -1190,7 +1211,7 @@
 
 	/* cleanup any ndlp on mbox q waiting for reglogin cmpl */
 	if ((mb = phba->sli.mbox_active)) {
-		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		   (ndlp == (struct lpfc_nodelist *) mb->context2)) {
 			lpfc_nlp_put(ndlp);
 			mb->context2 = NULL;
@@ -1200,7 +1221,7 @@
 
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
-		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		   (ndlp == (struct lpfc_nodelist *) mb->context2)) {
 			mp = (struct lpfc_dmabuf *) (mb->context1);
 			if (mp) {
@@ -1251,7 +1272,7 @@
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	uint32_t did  = mb->un.varWords[1];
 
 	if (mb->mbxStatus) {
@@ -1283,6 +1304,7 @@
 	}
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
+	ndlp->nlp_flag |= NLP_RPI_VALID;
 
 	/* Only if we are not a fabric nport do we issue PRLI */
 	if (!(ndlp->nlp_type & NLP_FABRIC)) {
@@ -1878,11 +1900,12 @@
 			    void *arg, uint32_t evt)
 {
 	LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg;
-	MAILBOX_t    *mb = &pmb->mb;
+	MAILBOX_t    *mb = &pmb->u.mb;
 
-	if (!mb->mbxStatus)
+	if (!mb->mbxStatus) {
 		ndlp->nlp_rpi = mb->un.varWords[0];
-	else {
+		ndlp->nlp_flag |= NLP_RPI_VALID;
+	} else {
 		if (ndlp->nlp_flag & NLP_NODEV_REMOVE) {
 			lpfc_drop_node(vport, ndlp);
 			return NLP_STE_FREED_NODE;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 8032c5a..e9fa676 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -31,8 +31,10 @@
 #include <scsi/scsi_transport_fc.h>
 
 #include "lpfc_version.h"
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -57,6 +59,8 @@
 	"SCSI_PROT_READ_CONVERT",
 	"SCSI_PROT_WRITE_CONVERT"
 };
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
 
 static void
 lpfc_debug_save_data(struct scsi_cmnd *cmnd)
@@ -325,7 +329,7 @@
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			shost_for_each_device(sdev, shost) {
 				new_queue_depth =
@@ -379,7 +383,7 @@
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			shost_for_each_device(sdev, shost) {
 				if (vports[i]->cfg_lun_queue_depth <=
@@ -427,7 +431,7 @@
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			shost_for_each_device(sdev, shost) {
 				rport = starget_to_rport(scsi_target(sdev));
@@ -438,22 +442,23 @@
 }
 
 /**
- * lpfc_new_scsi_buf - Scsi buffer allocator
+ * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
  * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
  *
- * This routine allocates a scsi buffer, which contains all the necessary
- * information needed to initiate a SCSI I/O.  The non-DMAable buffer region
- * contains information to build the IOCB.  The DMAable region contains
- * memory for the FCP CMND, FCP RSP, and the initial BPL.  In addition to
- * allocating memory, the FCP CMND and FCP RSP BDEs are setup in the BPL
- * and the BPL BDE is setup in the IOCB.
+ * This routine allocates a scsi buffer for device with SLI-3 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O. The non-DMAable buffer region contains information to build
+ * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP,
+ * and the initial BPL. In addition to allocating memory, the FCP CMND and
+ * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB.
  *
  * Return codes:
- *   NULL - Error
- *   Pointer to lpfc_scsi_buf data structure - Success
+ *   int - number of scsi buffers that were allocated.
+ *   0 = failure, less than num_to_alloc is a partial failure.
  **/
-static struct lpfc_scsi_buf *
-lpfc_new_scsi_buf(struct lpfc_vport *vport)
+static int
+lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
 {
 	struct lpfc_hba *phba = vport->phba;
 	struct lpfc_scsi_buf *psb;
@@ -463,107 +468,401 @@
 	dma_addr_t pdma_phys_fcp_rsp;
 	dma_addr_t pdma_phys_bpl;
 	uint16_t iotag;
+	int bcnt;
 
-	psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
-	if (!psb)
-		return NULL;
+	for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+		psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+		if (!psb)
+			break;
 
-	/*
-	 * Get memory from the pci pool to map the virt space to pci bus space
-	 * for an I/O.  The DMA buffer includes space for the struct fcp_cmnd,
-	 * struct fcp_rsp and the number of bde's necessary to support the
-	 * sg_tablesize.
-	 */
-	psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, GFP_KERNEL,
-							&psb->dma_handle);
-	if (!psb->data) {
-		kfree(psb);
-		return NULL;
-	}
+		/*
+		 * Get memory from the pci pool to map the virt space to pci
+		 * bus space for an I/O.  The DMA buffer includes space for the
+		 * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+		 * necessary to support the sg_tablesize.
+		 */
+		psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+					GFP_KERNEL, &psb->dma_handle);
+		if (!psb->data) {
+			kfree(psb);
+			break;
+		}
 
-	/* Initialize virtual ptrs to dma_buf region. */
-	memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+		/* Initialize virtual ptrs to dma_buf region. */
+		memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
 
-	/* Allocate iotag for psb->cur_iocbq. */
-	iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
-	if (iotag == 0) {
-		pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
-			      psb->data, psb->dma_handle);
-		kfree (psb);
-		return NULL;
-	}
-	psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+		/* Allocate iotag for psb->cur_iocbq. */
+		iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+		if (iotag == 0) {
+			pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+					psb->data, psb->dma_handle);
+			kfree(psb);
+			break;
+		}
+		psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
 
-	psb->fcp_cmnd = psb->data;
-	psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
-	psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
-							sizeof(struct fcp_rsp);
-
-	/* Initialize local short-hand pointers. */
-	bpl = psb->fcp_bpl;
-	pdma_phys_fcp_cmd = psb->dma_handle;
-	pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
-	pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+		psb->fcp_cmnd = psb->data;
+		psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
+		psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
 			sizeof(struct fcp_rsp);
 
-	/*
-	 * The first two bdes are the FCP_CMD and FCP_RSP.  The balance are sg
-	 * list bdes.  Initialize the first two and leave the rest for
-	 * queuecommand.
-	 */
-	bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
-	bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
-	bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
-	bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
-	bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
+		/* Initialize local short-hand pointers. */
+		bpl = psb->fcp_bpl;
+		pdma_phys_fcp_cmd = psb->dma_handle;
+		pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
+		pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+			sizeof(struct fcp_rsp);
 
-	/* Setup the physical region for the FCP RSP */
-	bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
-	bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
-	bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
-	bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
-	bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+		/*
+		 * The first two bdes are the FCP_CMD and FCP_RSP. The balance
+		 * are sg list bdes.  Initialize the first two and leave the
+		 * rest for queuecommand.
+		 */
+		bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
+		bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
+		bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
+		bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+		bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
 
-	/*
-	 * Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
-	 * initialize it with all known data now.
-	 */
-	iocb = &psb->cur_iocbq.iocb;
-	iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
-	if ((phba->sli_rev == 3) &&
-	    !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
-		/* fill in immediate fcp command BDE */
-		iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
-		iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
-		iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
-						       unsli3.fcp_ext.icd);
-		iocb->un.fcpi64.bdl.addrHigh = 0;
-		iocb->ulpBdeCount = 0;
-		iocb->ulpLe = 0;
-		/* fill in responce BDE */
-		iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
-		iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
-						sizeof(struct fcp_rsp);
-		iocb->unsli3.fcp_ext.rbde.addrLow =
-						putPaddrLow(pdma_phys_fcp_rsp);
-		iocb->unsli3.fcp_ext.rbde.addrHigh =
-						putPaddrHigh(pdma_phys_fcp_rsp);
-	} else {
-		iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
-		iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
-		iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl);
-		iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl);
-		iocb->ulpBdeCount = 1;
-		iocb->ulpLe = 1;
+		/* Setup the physical region for the FCP RSP */
+		bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
+		bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
+		bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
+		bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+		bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+
+		/*
+		 * Since the IOCB for the FCP I/O is built into this
+		 * lpfc_scsi_buf, initialize it with all known data now.
+		 */
+		iocb = &psb->cur_iocbq.iocb;
+		iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+		if ((phba->sli_rev == 3) &&
+				!(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
+			/* fill in immediate fcp command BDE */
+			iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+			iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+			iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
+					unsli3.fcp_ext.icd);
+			iocb->un.fcpi64.bdl.addrHigh = 0;
+			iocb->ulpBdeCount = 0;
+			iocb->ulpLe = 0;
+			/* fill in responce BDE */
+			iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
+							BUFF_TYPE_BDE_64;
+			iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
+				sizeof(struct fcp_rsp);
+			iocb->unsli3.fcp_ext.rbde.addrLow =
+				putPaddrLow(pdma_phys_fcp_rsp);
+			iocb->unsli3.fcp_ext.rbde.addrHigh =
+				putPaddrHigh(pdma_phys_fcp_rsp);
+		} else {
+			iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+			iocb->un.fcpi64.bdl.bdeSize =
+					(2 * sizeof(struct ulp_bde64));
+			iocb->un.fcpi64.bdl.addrLow =
+					putPaddrLow(pdma_phys_bpl);
+			iocb->un.fcpi64.bdl.addrHigh =
+					putPaddrHigh(pdma_phys_bpl);
+			iocb->ulpBdeCount = 1;
+			iocb->ulpLe = 1;
+		}
+		iocb->ulpClass = CLASS3;
+		psb->status = IOSTAT_SUCCESS;
+		/* Put it back into the SCSI buffer list */
+		lpfc_release_scsi_buf_s4(phba, psb);
+
 	}
-	iocb->ulpClass = CLASS3;
 
-	return psb;
+	return bcnt;
 }
 
 /**
- * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba
- * @phba: The Hba for which this call is being executed.
+ * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the fcp xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 fast-path
+ * FCP aborted xri.
+ **/
+void
+lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
+			  struct sli4_wcqe_xri_aborted *axri)
+{
+	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+	struct lpfc_scsi_buf *psb, *next_psb;
+	unsigned long iflag = 0;
+
+	spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag);
+	list_for_each_entry_safe(psb, next_psb,
+		&phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
+		if (psb->cur_iocbq.sli4_xritag == xri) {
+			list_del(&psb->list);
+			psb->status = IOSTAT_SUCCESS;
+			spin_unlock_irqrestore(
+				&phba->sli4_hba.abts_scsi_buf_list_lock,
+				iflag);
+			lpfc_release_scsi_buf_s4(phba, psb);
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+				iflag);
+}
+
+/**
+ * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of scsi buffers that have been allocated and
+ * repost them to the HBA by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
+ * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
+ * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+int
+lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_scsi_buf *psb;
+	int index, status, bcnt = 0, rcnt = 0, rc = 0;
+	LIST_HEAD(sblist);
+
+	for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) {
+		psb = phba->sli4_hba.lpfc_scsi_psb_array[index];
+		if (psb) {
+			/* Remove from SCSI buffer list */
+			list_del(&psb->list);
+			/* Add it to a local SCSI buffer list */
+			list_add_tail(&psb->list, &sblist);
+			if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+				bcnt = rcnt;
+				rcnt = 0;
+			}
+		} else
+			/* A hole present in the XRI array, need to skip */
+			bcnt = rcnt;
+
+		if (index == phba->sli4_hba.scsi_xri_cnt - 1)
+			/* End of XRI array for SCSI buffer, complete */
+			bcnt = rcnt;
+
+		/* Continue until collect up to a nembed page worth of sgls */
+		if (bcnt == 0)
+			continue;
+		/* Now, post the SCSI buffer list sgls as a block */
+		status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+		/* Reset SCSI buffer count for next round of posting */
+		bcnt = 0;
+		while (!list_empty(&sblist)) {
+			list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+					 list);
+			if (status) {
+				/* Put this back on the abort scsi list */
+				psb->status = IOSTAT_LOCAL_REJECT;
+				psb->result = IOERR_ABORT_REQUESTED;
+				rc++;
+			} else
+				psb->status = IOSTAT_SUCCESS;
+			/* Put it back into the SCSI buffer list */
+			lpfc_release_scsi_buf_s4(phba, psb);
+		}
+	}
+	return rc;
+}
+
+/**
+ * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine allocates a scsi buffer for device with SLI-4 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O.
+ *
+ * Return codes:
+ *   int - number of scsi buffers that were allocated.
+ *   0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static int
+lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_scsi_buf *psb;
+	struct sli4_sge *sgl;
+	IOCB_t *iocb;
+	dma_addr_t pdma_phys_fcp_cmd;
+	dma_addr_t pdma_phys_fcp_rsp;
+	dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
+	uint16_t iotag, last_xritag = NO_XRI;
+	int status = 0, index;
+	int bcnt;
+	int non_sequential_xri = 0;
+	int rc = 0;
+	LIST_HEAD(sblist);
+
+	for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+		psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+		if (!psb)
+			break;
+
+		/*
+		 * Get memory from the pci pool to map the virt space to pci bus
+		 * space for an I/O.  The DMA buffer includes space for the
+		 * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+		 * necessary to support the sg_tablesize.
+		 */
+		psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+						GFP_KERNEL, &psb->dma_handle);
+		if (!psb->data) {
+			kfree(psb);
+			break;
+		}
+
+		/* Initialize virtual ptrs to dma_buf region. */
+		memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+
+		/* Allocate iotag for psb->cur_iocbq. */
+		iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+		if (iotag == 0) {
+			kfree(psb);
+			break;
+		}
+
+		psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba);
+		if (psb->cur_iocbq.sli4_xritag == NO_XRI) {
+			pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+			      psb->data, psb->dma_handle);
+			kfree(psb);
+			break;
+		}
+		if (last_xritag != NO_XRI
+			&& psb->cur_iocbq.sli4_xritag != (last_xritag+1)) {
+			non_sequential_xri = 1;
+		} else
+			list_add_tail(&psb->list, &sblist);
+		last_xritag = psb->cur_iocbq.sli4_xritag;
+
+		index = phba->sli4_hba.scsi_xri_cnt++;
+		psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+		psb->fcp_bpl = psb->data;
+		psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
+			- (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+		psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
+					sizeof(struct fcp_cmnd));
+
+		/* Initialize local short-hand pointers. */
+		sgl = (struct sli4_sge *)psb->fcp_bpl;
+		pdma_phys_bpl = psb->dma_handle;
+		pdma_phys_fcp_cmd =
+			(psb->dma_handle + phba->cfg_sg_dma_buf_size)
+			 - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+		pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
+
+		/*
+		 * The first two bdes are the FCP_CMD and FCP_RSP.  The balance
+		 * are sg list bdes.  Initialize the first two and leave the
+		 * rest for queuecommand.
+		 */
+		sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
+		sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
+		bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd));
+		bf_set(lpfc_sli4_sge_last, sgl, 0);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl->word3 = cpu_to_le32(sgl->word3);
+		sgl++;
+
+		/* Setup the physical region for the FCP RSP */
+		sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
+		sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
+		bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp));
+		bf_set(lpfc_sli4_sge_last, sgl, 1);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl->word3 = cpu_to_le32(sgl->word3);
+
+		/*
+		 * Since the IOCB for the FCP I/O is built into this
+		 * lpfc_scsi_buf, initialize it with all known data now.
+		 */
+		iocb = &psb->cur_iocbq.iocb;
+		iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+		iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
+		/* setting the BLP size to 2 * sizeof BDE may not be correct.
+		 * We are setting the bpl to point to out sgl. An sgl's
+		 * entries are 16 bytes, a bpl entries are 12 bytes.
+		 */
+		iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+		iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
+		iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
+		iocb->ulpBdeCount = 1;
+		iocb->ulpLe = 1;
+		iocb->ulpClass = CLASS3;
+		if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+			pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
+		else
+			pdma_phys_bpl1 = 0;
+		psb->dma_phys_bpl = pdma_phys_bpl;
+		phba->sli4_hba.lpfc_scsi_psb_array[index] = psb;
+		if (non_sequential_xri) {
+			status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl,
+						pdma_phys_bpl1,
+						psb->cur_iocbq.sli4_xritag);
+			if (status) {
+				/* Put this back on the abort scsi list */
+				psb->status = IOSTAT_LOCAL_REJECT;
+				psb->result = IOERR_ABORT_REQUESTED;
+				rc++;
+			} else
+				psb->status = IOSTAT_SUCCESS;
+			/* Put it back into the SCSI buffer list */
+			lpfc_release_scsi_buf_s4(phba, psb);
+			break;
+		}
+	}
+	if (bcnt) {
+		status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+		/* Reset SCSI buffer count for next round of posting */
+		while (!list_empty(&sblist)) {
+			list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+				 list);
+			if (status) {
+				/* Put this back on the abort scsi list */
+				psb->status = IOSTAT_LOCAL_REJECT;
+				psb->result = IOERR_ABORT_REQUESTED;
+				rc++;
+			} else
+				psb->status = IOSTAT_SUCCESS;
+			/* Put it back into the SCSI buffer list */
+			lpfc_release_scsi_buf_s4(phba, psb);
+		}
+	}
+
+	return bcnt + non_sequential_xri - rc;
+}
+
+/**
+ * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine wraps the actual SCSI buffer allocator function pointer from
+ * the lpfc_hba struct.
+ *
+ * Return codes:
+ *   int - number of scsi buffers that were allocated.
+ *   0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static inline int
+lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
+{
+	return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc);
+}
+
+/**
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
+ * @phba: The HBA for which this call is being executed.
  *
  * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
  * and returns to caller.
@@ -591,7 +890,7 @@
 }
 
 /**
- * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list
+ * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list
  * @phba: The Hba for which this call is being executed.
  * @psb: The scsi buffer which is being released.
  *
@@ -599,7 +898,7 @@
  * lpfc_scsi_buf_list list.
  **/
 static void
-lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 {
 	unsigned long iflag = 0;
 
@@ -610,21 +909,69 @@
 }
 
 /**
- * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer
+ * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
+ * and cannot be reused for at least RA_TOV amount of time if it was
+ * aborted.
+ **/
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+	unsigned long iflag = 0;
+
+	if (psb->status == IOSTAT_LOCAL_REJECT
+		&& psb->result == IOERR_ABORT_REQUESTED) {
+		spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
+					iflag);
+		psb->pCmd = NULL;
+		list_add_tail(&psb->list,
+			&phba->sli4_hba.lpfc_abts_scsi_buf_list);
+		spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+					iflag);
+	} else {
+
+		spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+		psb->pCmd = NULL;
+		list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
+		spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+	}
+}
+
+/**
+ * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list.
+ **/
+static void
+lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+
+	phba->lpfc_release_scsi_buf(phba, psb);
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
  * @phba: The Hba for which this call is being executed.
  * @lpfc_cmd: The scsi buffer which is going to be mapped.
  *
  * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
- * field of @lpfc_cmd. This routine scans through sg elements and format the
- * bdea. This routine also initializes all IOCB fields which are dependent on
- * scsi command request buffer.
+ * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans
+ * through sg elements and format the bdea. This routine also initializes all
+ * IOCB fields which are dependent on scsi command request buffer.
  *
  * Return codes:
  *   1 - Error
  *   0 - Success
  **/
 static int
-lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 {
 	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
 	struct scatterlist *sgel = NULL;
@@ -1412,6 +1759,133 @@
 }
 
 /**
+ * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 	1 - Error
+ * 	0 - Success
+ **/
+static int
+lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+	struct scatterlist *sgel = NULL;
+	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+	struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+	dma_addr_t physaddr;
+	uint32_t num_bde = 0;
+	uint32_t dma_len;
+	uint32_t dma_offset = 0;
+	int nseg;
+
+	/*
+	 * There are three possibilities here - use scatter-gather segment, use
+	 * the single mapping, or neither.  Start the lpfc command prep by
+	 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
+	 * data bde entry.
+	 */
+	if (scsi_sg_count(scsi_cmnd)) {
+		/*
+		 * The driver stores the segment count returned from pci_map_sg
+		 * because this a count of dma-mappings used to map the use_sg
+		 * pages.  They are not guaranteed to be the same for those
+		 * architectures that implement an IOMMU.
+		 */
+
+		nseg = scsi_dma_map(scsi_cmnd);
+		if (unlikely(!nseg))
+			return 1;
+		sgl += 1;
+		/* clear the last flag in the fcp_rsp map entry */
+		sgl->word2 = le32_to_cpu(sgl->word2);
+		bf_set(lpfc_sli4_sge_last, sgl, 0);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl += 1;
+
+		lpfc_cmd->seg_cnt = nseg;
+		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+			printk(KERN_ERR "%s: Too many sg segments from "
+			       "dma_map_sg.  Config %d, seg_cnt %d\n",
+			       __func__, phba->cfg_sg_seg_cnt,
+			       lpfc_cmd->seg_cnt);
+			scsi_dma_unmap(scsi_cmnd);
+			return 1;
+		}
+
+		/*
+		 * The driver established a maximum scatter-gather segment count
+		 * during probe that limits the number of sg elements in any
+		 * single scsi command.  Just run through the seg_cnt and format
+		 * the sge's.
+		 * When using SLI-3 the driver will try to fit all the BDEs into
+		 * the IOCB. If it can't then the BDEs get added to a BPL as it
+		 * does for SLI-2 mode.
+		 */
+		scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
+			physaddr = sg_dma_address(sgel);
+			dma_len = sg_dma_len(sgel);
+			bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel));
+			sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
+			sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
+			if ((num_bde + 1) == nseg)
+				bf_set(lpfc_sli4_sge_last, sgl, 1);
+			else
+				bf_set(lpfc_sli4_sge_last, sgl, 0);
+			bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+			sgl->word2 = cpu_to_le32(sgl->word2);
+			sgl->word3 = cpu_to_le32(sgl->word3);
+			dma_offset += dma_len;
+			sgl++;
+		}
+	} else {
+		sgl += 1;
+		/* clear the last flag in the fcp_rsp map entry */
+		sgl->word2 = le32_to_cpu(sgl->word2);
+		bf_set(lpfc_sli4_sge_last, sgl, 1);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+	}
+
+	/*
+	 * Finish initializing those IOCB fields that are dependent on the
+	 * scsi_cmnd request_buffer.  Note that for SLI-2 the bdeSize is
+	 * explicitly reinitialized.
+	 * all iocb memory resources are reused.
+	 */
+	fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
+
+	/*
+	 * Due to difference in data length between DIF/non-DIF paths,
+	 * we need to set word 4 of IOCB here
+	 */
+	iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
+	return 0;
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine wraps the actual DMA mapping function pointer from the
+ * lpfc_hba struct.
+ *
+ * Return codes:
+ * 	1 - Error
+ * 	0 - Success
+ **/
+static inline int
+lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+	return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
+}
+
+/**
  * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
  * @phba: Pointer to hba context object.
  * @vport: Pointer to vport object.
@@ -1504,15 +1978,15 @@
 }
 
 /**
- * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather
- * @phba: The Hba for which this call is being executed.
+ * lpfc_scsi_unprep_dma_buf_s3 - Un-map DMA mapping of SG-list for SLI3 dev
+ * @phba: The HBA for which this call is being executed.
  * @psb: The scsi buffer which is going to be un-mapped.
  *
  * This routine does DMA un-mapping of scatter gather list of scsi command
- * field of @lpfc_cmd.
+ * field of @lpfc_cmd for device with SLI-3 interface spec.
  **/
 static void
-lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
+lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 {
 	/*
 	 * There are only two special cases to consider.  (1) the scsi command
@@ -1529,6 +2003,36 @@
 }
 
 /**
+ * lpfc_scsi_unprep_dma_buf_s4 - Un-map DMA mapping of SG-list for SLI4 dev
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec. If we have to
+ * remove the sgl for this scsi buffer then we will do it here. For now
+ * we should be able to just call the sli3 unprep routine.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+	lpfc_scsi_unprep_dma_buf_s3(phba, psb);
+}
+
+/**
+ * lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+	phba->lpfc_scsi_unprep_dma_buf(phba, psb);
+}
+
+/**
  * lpfc_handler_fcp_err - FCP response handler
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
@@ -1676,7 +2180,7 @@
  * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
  * @phba: The Hba for which this call is being executed.
  * @pIocbIn: The command IOCBQ for the scsi cmnd.
- * @pIocbOut: The response IOCBQ for the scsi cmnd .
+ * @pIocbOut: The response IOCBQ for the scsi cmnd.
  *
  * This routine assigns scsi command result by looking into response IOCB
  * status field appropriately. This routine handles QUEUE FULL condition as
@@ -1957,16 +2461,16 @@
 }
 
 /**
- * lpfc_scsi_prep_cmnd -  Routine to convert scsi cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s3 - Convert scsi cmnd to FCP infor unit for SLI3 dev
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: The scsi command which needs to send.
  * @pnode: Pointer to lpfc_nodelist.
  *
  * This routine initializes fcp_cmnd and iocb data structure from scsi command
- * to transfer.
+ * to transfer for device with SLI3 interface spec.
  **/
 static void
-lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 		    struct lpfc_nodelist *pnode)
 {
 	struct lpfc_hba *phba = vport->phba;
@@ -2013,8 +2517,11 @@
 	if (scsi_sg_count(scsi_cmnd)) {
 		if (datadir == DMA_TO_DEVICE) {
 			iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
-			iocb_cmd->un.fcpi.fcpi_parm = 0;
-			iocb_cmd->ulpPU = 0;
+			if (phba->sli_rev < LPFC_SLI_REV4) {
+				iocb_cmd->un.fcpi.fcpi_parm = 0;
+				iocb_cmd->ulpPU = 0;
+			} else
+				iocb_cmd->ulpPU = PARM_READ_CHECK;
 			fcp_cmnd->fcpCntl3 = WRITE_DATA;
 			phba->fc4OutputRequests++;
 		} else {
@@ -2051,20 +2558,60 @@
 }
 
 /**
- * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s4 - Convert scsi cmnd to FCP infor unit for SLI4 dev
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine initializes fcp_cmnd and iocb data structure from scsi command
+ * to transfer for device with SLI4 interface spec.
+ **/
+static void
+lpfc_scsi_prep_cmnd_s4(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+		       struct lpfc_nodelist *pnode)
+{
+	/*
+	 * The prep cmnd routines do not touch the sgl or its
+	 * entries. We may not have to do anything different.
+	 * I will leave this function in place until we can
+	 * run some IO through the driver and determine if changes
+	 * are needed.
+	 */
+	return lpfc_scsi_prep_cmnd_s3(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine wraps the actual convert SCSI cmnd function pointer from
+ * the lpfc_hba struct.
+ **/
+static inline void
+lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+		    struct lpfc_nodelist *pnode)
+{
+	vport->phba->lpfc_scsi_prep_cmnd(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s3 - Convert SLI3 scsi TM cmd to FCP info unit
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
  * @lun: Logical unit number.
  * @task_mgmt_cmd: SCSI task management command.
  *
- * This routine creates FCP information unit corresponding to @task_mgmt_cmd.
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-3 interface spec.
  *
  * Return codes:
  *   0 - Error
  *   1 - Success
  **/
 static int
-lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
 			     struct lpfc_scsi_buf *lpfc_cmd,
 			     unsigned int lun,
 			     uint8_t task_mgmt_cmd)
@@ -2114,6 +2661,107 @@
 }
 
 /**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s4 - Convert SLI4 scsi TM cmd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 	0 - Error
+ * 	1 - Success
+ **/
+static int
+lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport,
+				struct lpfc_scsi_buf *lpfc_cmd,
+				unsigned int lun,
+				uint8_t task_mgmt_cmd)
+{
+	/*
+	 * The prep cmnd routines do not touch the sgl or its
+	 * entries. We may not have to do anything different.
+	 * I will leave this function in place until we can
+	 * run some IO through the driver and determine if changes
+	 * are needed.
+	 */
+	return lpfc_scsi_prep_task_mgmt_cmd_s3(vport, lpfc_cmd, lun,
+						task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine wraps the actual convert SCSI TM to FCP information unit
+ * function pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * 	0 - Error
+ * 	1 - Success
+ **/
+static inline int
+lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+			     struct lpfc_scsi_buf *lpfc_cmd,
+			     unsigned int lun,
+			     uint8_t task_mgmt_cmd)
+{
+	struct lpfc_hba *phba = vport->phba;
+
+	return phba->lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
+						  task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SCSI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
+		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
+		phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s3;
+		phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s3;
+		phba->lpfc_scsi_prep_task_mgmt_cmd =
+					lpfc_scsi_prep_task_mgmt_cmd_s3;
+		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
+		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
+		phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s4;
+		phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s4;
+		phba->lpfc_scsi_prep_task_mgmt_cmd =
+					lpfc_scsi_prep_task_mgmt_cmd_s4;
+		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1418 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
+	phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
+	return 0;
+}
+
+/**
  * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
  * @phba: The Hba for which this call is being executed.
  * @cmdiocbq: Pointer to lpfc_iocbq data structure.
@@ -2178,9 +2826,8 @@
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
 			 "0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
 			 tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
-	status = lpfc_sli_issue_iocb_wait(phba,
-				       &phba->sli.ring[phba->sli.fcp_ring],
-				       iocbq, iocbqrsp, lpfc_cmd->timeout);
+	status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
+					  iocbq, iocbqrsp, lpfc_cmd->timeout);
 	if (status != IOCB_SUCCESS) {
 		if (status == IOCB_TIMEDOUT) {
 			iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
@@ -2305,7 +2952,6 @@
 	struct Scsi_Host  *shost = cmnd->device->host;
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_sli   *psli = &phba->sli;
 	struct lpfc_rport_data *rdata = cmnd->device->hostdata;
 	struct lpfc_nodelist *ndlp = rdata->pnode;
 	struct lpfc_scsi_buf *lpfc_cmd;
@@ -2427,7 +3073,7 @@
 	lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
 
 	atomic_inc(&ndlp->cmd_pending);
-	err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring],
+	err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
 				  &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
 	if (err) {
 		atomic_dec(&ndlp->cmd_pending);
@@ -2490,7 +3136,6 @@
 	struct Scsi_Host  *shost = cmnd->device->host;
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring];
 	struct lpfc_iocbq *iocb;
 	struct lpfc_iocbq *abtsiocb;
 	struct lpfc_scsi_buf *lpfc_cmd;
@@ -2531,7 +3176,10 @@
 	icmd = &abtsiocb->iocb;
 	icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
 	icmd->un.acxri.abortContextTag = cmd->ulpContext;
-	icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		icmd->un.acxri.abortIoTag = iocb->sli4_xritag;
+	else
+		icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
 
 	icmd->ulpLe = 1;
 	icmd->ulpClass = cmd->ulpClass;
@@ -2542,7 +3190,8 @@
 
 	abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
 	abtsiocb->vport = vport;
-	if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) ==
+	    IOCB_ERROR) {
 		lpfc_sli_release_iocbq(phba, abtsiocb);
 		ret = FAILED;
 		goto out;
@@ -2668,8 +3317,7 @@
 			 "0703 Issue target reset to TGT %d LUN %d "
 			 "rpi x%x nlp_flag x%x\n", cmnd->device->id,
 			 cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
-	status = lpfc_sli_issue_iocb_wait(phba,
-					  &phba->sli.ring[phba->sli.fcp_ring],
+	status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
 					  iocbq, iocbqrsp, lpfc_cmd->timeout);
 	if (status == IOCB_TIMEDOUT) {
 		iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
@@ -2825,11 +3473,10 @@
 {
 	struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_scsi_buf *scsi_buf = NULL;
 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
-	uint32_t total = 0, i;
+	uint32_t total = 0;
 	uint32_t num_to_alloc = 0;
-	unsigned long flags;
+	int num_allocated = 0;
 
 	if (!rport || fc_remote_port_chkready(rport))
 		return -ENXIO;
@@ -2863,20 +3510,13 @@
 				 (phba->cfg_hba_queue_depth - total));
 		num_to_alloc = phba->cfg_hba_queue_depth - total;
 	}
-
-	for (i = 0; i < num_to_alloc; i++) {
-		scsi_buf = lpfc_new_scsi_buf(vport);
-		if (!scsi_buf) {
-			lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
-					 "0706 Failed to allocate "
-					 "command buffer\n");
-			break;
-		}
-
-		spin_lock_irqsave(&phba->scsi_buf_list_lock, flags);
-		phba->total_scsi_bufs++;
-		list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list);
-		spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags);
+	num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
+	if (num_to_alloc != num_allocated) {
+			lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+				 "0708 Allocation request of %d "
+				 "command buffers did not succeed.  "
+				 "Allocated %d buffers.\n",
+				 num_to_alloc, num_allocated);
 	}
 	return 0;
 }
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index c7c440d..65dfc8b 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -140,6 +140,8 @@
 	struct fcp_rsp *fcp_rsp;
 	struct ulp_bde64 *fcp_bpl;
 
+	dma_addr_t dma_phys_bpl;
+
 	/* cur_iocbq has phys of the dma-able buffer.
 	 * Iotag is in here
 	 */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index eb5c75c..ff04daf 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -29,9 +29,12 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -40,24 +43,7 @@
 #include "lpfc_logmsg.h"
 #include "lpfc_compat.h"
 #include "lpfc_debugfs.h"
-
-/*
- * Define macro to log: Mailbox command x%x cannot issue Data
- * This allows multiple uses of lpfc_msgBlk0311
- * w/o perturbing log msg utility.
- */
-#define LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag) \
-			lpfc_printf_log(phba, \
-				KERN_INFO, \
-				LOG_MBOX | LOG_SLI, \
-				"(%d):0311 Mailbox command x%x cannot " \
-				"issue Data: x%x x%x x%x\n", \
-				pmbox->vport ? pmbox->vport->vpi : 0, \
-				pmbox->mb.mbxCommand,		\
-				phba->pport->port_state,	\
-				psli->sli_flag,	\
-				flag)
-
+#include "lpfc_vport.h"
 
 /* There are only four IOCB completion types. */
 typedef enum _lpfc_iocb_type {
@@ -67,6 +53,350 @@
 	LPFC_ABORT_IOCB
 } lpfc_iocb_type;
 
+
+/* Provide function prototypes local to this module. */
+static int lpfc_sli_issue_mbox_s4(struct lpfc_hba *, LPFC_MBOXQ_t *,
+				  uint32_t);
+static int lpfc_sli4_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *,
+			    uint8_t *, uint32_t *);
+
+static IOCB_t *
+lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq)
+{
+	return &iocbq->iocb;
+}
+
+/**
+ * lpfc_sli4_wq_put - Put a Work Queue Entry on an Work Queue
+ * @q: The Work Queue to operate on.
+ * @wqe: The work Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
+{
+	union lpfc_wqe *temp_wqe = q->qe[q->host_index].wqe;
+	struct lpfc_register doorbell;
+	uint32_t host_index;
+
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+		return -ENOMEM;
+	/* set consumption flag every once in a while */
+	if (!((q->host_index + 1) % LPFC_RELEASE_NOTIFICATION_INTERVAL))
+		bf_set(lpfc_wqe_gen_wqec, &wqe->generic, 1);
+
+	lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
+
+	/* Update the host index before invoking device */
+	host_index = q->host_index;
+	q->host_index = ((q->host_index + 1) % q->entry_count);
+
+	/* Ring Doorbell */
+	doorbell.word0 = 0;
+	bf_set(lpfc_wq_doorbell_num_posted, &doorbell, 1);
+	bf_set(lpfc_wq_doorbell_index, &doorbell, host_index);
+	bf_set(lpfc_wq_doorbell_id, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.WQDBregaddr);
+	readl(q->phba->sli4_hba.WQDBregaddr); /* Flush */
+
+	return 0;
+}
+
+/**
+ * lpfc_sli4_wq_release - Updates internal hba index for WQ
+ * @q: The Work Queue to operate on.
+ * @index: The index to advance the hba index to.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * Work Queue Entries by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_wq_release(struct lpfc_queue *q, uint32_t index)
+{
+	uint32_t released = 0;
+
+	if (q->hba_index == index)
+		return 0;
+	do {
+		q->hba_index = ((q->hba_index + 1) % q->entry_count);
+		released++;
+	} while (q->hba_index != index);
+	return released;
+}
+
+/**
+ * lpfc_sli4_mq_put - Put a Mailbox Queue Entry on an Mailbox Queue
+ * @q: The Mailbox Queue to operate on.
+ * @wqe: The Mailbox Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @mqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_mq_put(struct lpfc_queue *q, struct lpfc_mqe *mqe)
+{
+	struct lpfc_mqe *temp_mqe = q->qe[q->host_index].mqe;
+	struct lpfc_register doorbell;
+	uint32_t host_index;
+
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+		return -ENOMEM;
+	lpfc_sli_pcimem_bcopy(mqe, temp_mqe, q->entry_size);
+	/* Save off the mailbox pointer for completion */
+	q->phba->mbox = (MAILBOX_t *)temp_mqe;
+
+	/* Update the host index before invoking device */
+	host_index = q->host_index;
+	q->host_index = ((q->host_index + 1) % q->entry_count);
+
+	/* Ring Doorbell */
+	doorbell.word0 = 0;
+	bf_set(lpfc_mq_doorbell_num_posted, &doorbell, 1);
+	bf_set(lpfc_mq_doorbell_id, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.MQDBregaddr);
+	readl(q->phba->sli4_hba.MQDBregaddr); /* Flush */
+	return 0;
+}
+
+/**
+ * lpfc_sli4_mq_release - Updates internal hba index for MQ
+ * @q: The Mailbox Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * a Mailbox Queue Entry by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_mq_release(struct lpfc_queue *q)
+{
+	/* Clear the mailbox pointer for completion */
+	q->phba->mbox = NULL;
+	q->hba_index = ((q->hba_index + 1) % q->entry_count);
+	return 1;
+}
+
+/**
+ * lpfc_sli4_eq_get - Gets the next valid EQE from a EQ
+ * @q: The Event Queue to get the first valid EQE from
+ *
+ * This routine will get the first valid Event Queue Entry from @q, update
+ * the queue's internal hba index, and return the EQE. If no valid EQEs are in
+ * the Queue (no more work to do), or the Queue is full of EQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_eqe *
+lpfc_sli4_eq_get(struct lpfc_queue *q)
+{
+	struct lpfc_eqe *eqe = q->qe[q->hba_index].eqe;
+
+	/* If the next EQE is not valid then we are done */
+	if (!bf_get(lpfc_eqe_valid, eqe))
+		return NULL;
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->hba_index + 1) % q->entry_count) == q->host_index)
+		return NULL;
+
+	q->hba_index = ((q->hba_index + 1) % q->entry_count);
+	return eqe;
+}
+
+/**
+ * lpfc_sli4_eq_release - Indicates the host has finished processing an EQ
+ * @q: The Event Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Event Queue Entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the EQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of EQEs that were popped.
+ **/
+uint32_t
+lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
+{
+	uint32_t released = 0;
+	struct lpfc_eqe *temp_eqe;
+	struct lpfc_register doorbell;
+
+	/* while there are valid entries */
+	while (q->hba_index != q->host_index) {
+		temp_eqe = q->qe[q->host_index].eqe;
+		bf_set(lpfc_eqe_valid, temp_eqe, 0);
+		released++;
+		q->host_index = ((q->host_index + 1) % q->entry_count);
+	}
+	if (unlikely(released == 0 && !arm))
+		return 0;
+
+	/* ring doorbell for number popped */
+	doorbell.word0 = 0;
+	if (arm) {
+		bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+		bf_set(lpfc_eqcq_doorbell_eqci, &doorbell, 1);
+	}
+	bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
+	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
+	bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+	return released;
+}
+
+/**
+ * lpfc_sli4_cq_get - Gets the next valid CQE from a CQ
+ * @q: The Completion Queue to get the first valid CQE from
+ *
+ * This routine will get the first valid Completion Queue Entry from @q, update
+ * the queue's internal hba index, and return the CQE. If no valid CQEs are in
+ * the Queue (no more work to do), or the Queue is full of CQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_cqe *
+lpfc_sli4_cq_get(struct lpfc_queue *q)
+{
+	struct lpfc_cqe *cqe;
+
+	/* If the next CQE is not valid then we are done */
+	if (!bf_get(lpfc_cqe_valid, q->qe[q->hba_index].cqe))
+		return NULL;
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->hba_index + 1) % q->entry_count) == q->host_index)
+		return NULL;
+
+	cqe = q->qe[q->hba_index].cqe;
+	q->hba_index = ((q->hba_index + 1) % q->entry_count);
+	return cqe;
+}
+
+/**
+ * lpfc_sli4_cq_release - Indicates the host has finished processing a CQ
+ * @q: The Completion Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Completion queue entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the CQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of CQEs that were released.
+ **/
+uint32_t
+lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
+{
+	uint32_t released = 0;
+	struct lpfc_cqe *temp_qe;
+	struct lpfc_register doorbell;
+
+	/* while there are valid entries */
+	while (q->hba_index != q->host_index) {
+		temp_qe = q->qe[q->host_index].cqe;
+		bf_set(lpfc_cqe_valid, temp_qe, 0);
+		released++;
+		q->host_index = ((q->host_index + 1) % q->entry_count);
+	}
+	if (unlikely(released == 0 && !arm))
+		return 0;
+
+	/* ring doorbell for number popped */
+	doorbell.word0 = 0;
+	if (arm)
+		bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+	bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
+	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_COMPLETION);
+	bf_set(lpfc_eqcq_doorbell_cqid, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+	return released;
+}
+
+/**
+ * lpfc_sli4_rq_put - Put a Receive Buffer Queue Entry on a Receive Queue
+ * @q: The Header Receive Queue to operate on.
+ * @wqe: The Receive Queue Entry to put on the Receive queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Receive Queue Doorbell to signal the
+ * HBA to start processing the Receive Queue Entry. This function returns the
+ * index that the rqe was copied to if successful. If no entries are available
+ * on @q then this function will return -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static int
+lpfc_sli4_rq_put(struct lpfc_queue *hq, struct lpfc_queue *dq,
+		 struct lpfc_rqe *hrqe, struct lpfc_rqe *drqe)
+{
+	struct lpfc_rqe *temp_hrqe = hq->qe[hq->host_index].rqe;
+	struct lpfc_rqe *temp_drqe = dq->qe[dq->host_index].rqe;
+	struct lpfc_register doorbell;
+	int put_index = hq->host_index;
+
+	if (hq->type != LPFC_HRQ || dq->type != LPFC_DRQ)
+		return -EINVAL;
+	if (hq->host_index != dq->host_index)
+		return -EINVAL;
+	/* If the host has not yet processed the next entry then we are done */
+	if (((hq->host_index + 1) % hq->entry_count) == hq->hba_index)
+		return -EBUSY;
+	lpfc_sli_pcimem_bcopy(hrqe, temp_hrqe, hq->entry_size);
+	lpfc_sli_pcimem_bcopy(drqe, temp_drqe, dq->entry_size);
+
+	/* Update the host index to point to the next slot */
+	hq->host_index = ((hq->host_index + 1) % hq->entry_count);
+	dq->host_index = ((dq->host_index + 1) % dq->entry_count);
+
+	/* Ring The Header Receive Queue Doorbell */
+	if (!(hq->host_index % LPFC_RQ_POST_BATCH)) {
+		doorbell.word0 = 0;
+		bf_set(lpfc_rq_doorbell_num_posted, &doorbell,
+		       LPFC_RQ_POST_BATCH);
+		bf_set(lpfc_rq_doorbell_id, &doorbell, hq->queue_id);
+		writel(doorbell.word0, hq->phba->sli4_hba.RQDBregaddr);
+	}
+	return put_index;
+}
+
+/**
+ * lpfc_sli4_rq_release - Updates internal hba index for RQ
+ * @q: The Header Receive Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * one Receive Queue Entry by the HBA. When the HBA indicates that it has
+ * consumed an entry the host calls this function to update the queue's
+ * internal pointers. This routine returns the number of entries that were
+ * consumed by the HBA.
+ **/
+static uint32_t
+lpfc_sli4_rq_release(struct lpfc_queue *hq, struct lpfc_queue *dq)
+{
+	if ((hq->type != LPFC_HRQ) || (dq->type != LPFC_DRQ))
+		return 0;
+	hq->hba_index = ((hq->hba_index + 1) % hq->entry_count);
+	dq->hba_index = ((dq->hba_index + 1) % dq->entry_count);
+	return 1;
+}
+
 /**
  * lpfc_cmd_iocb - Get next command iocb entry in the ring
  * @phba: Pointer to HBA context object.
@@ -121,6 +451,76 @@
 }
 
 /**
+ * __lpfc_clear_active_sglq - Remove the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function clears the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+	uint16_t adj_xri;
+	struct lpfc_sglq *sglq;
+	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+		return NULL;
+	sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+	phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = NULL;
+	return sglq;
+}
+
+/**
+ * __lpfc_get_active_sglq - Get the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function returns the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+	uint16_t adj_xri;
+	struct lpfc_sglq *sglq;
+	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+		return NULL;
+	sglq =  phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+	return sglq;
+}
+
+/**
+ * __lpfc_sli_get_sglq - Allocates an iocb object from sgl pool
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with hbalock held. This function
+ * Gets a new driver sglq object from the sglq list. If the
+ * list is not empty then it is successful, it returns pointer to the newly
+ * allocated sglq object else it returns NULL.
+ **/
+static struct lpfc_sglq *
+__lpfc_sli_get_sglq(struct lpfc_hba *phba)
+{
+	struct list_head *lpfc_sgl_list = &phba->sli4_hba.lpfc_sgl_list;
+	struct lpfc_sglq *sglq = NULL;
+	uint16_t adj_xri;
+	list_remove_head(lpfc_sgl_list, sglq, struct lpfc_sglq, list);
+	adj_xri = sglq->sli4_xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
+	return sglq;
+}
+
+/**
  * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
  * @phba: Pointer to HBA context object.
  *
@@ -142,6 +542,82 @@
 }
 
 /**
+ * __lpfc_sli_release_iocbq_s4 - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ * The sqlq structure that holds the xritag and phys and virtual
+ * mappings for the scatter gather list is retrieved from the
+ * active array of sglq. The get of the sglq pointer also clears
+ * the entry in the array. If the status of the IO indiactes that
+ * this IO was aborted then the sglq entry it put on the
+ * lpfc_abts_els_sgl_list until the CQ_ABORTED_XRI is received. If the
+ * IO has good status or fails for any other reason then the sglq
+ * entry is added to the free list (lpfc_sgl_list).
+ **/
+static void
+__lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+	struct lpfc_sglq *sglq;
+	size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
+	unsigned long iflag;
+
+	if (iocbq->sli4_xritag == NO_XRI)
+		sglq = NULL;
+	else
+		sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag);
+	if (sglq)  {
+		if (iocbq->iocb_flag & LPFC_DRIVER_ABORTED
+			|| ((iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
+			&& (iocbq->iocb.un.ulpWord[4]
+				== IOERR_SLI_ABORTED))) {
+			spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock,
+					iflag);
+			list_add(&sglq->list,
+				&phba->sli4_hba.lpfc_abts_els_sgl_list);
+			spin_unlock_irqrestore(
+				&phba->sli4_hba.abts_sgl_list_lock, iflag);
+		} else
+			list_add(&sglq->list, &phba->sli4_hba.lpfc_sgl_list);
+	}
+
+
+	/*
+	 * Clean all volatile data fields, preserve iotag and node struct.
+	 */
+	memset((char *)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+	iocbq->sli4_xritag = NO_XRI;
+	list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
+}
+
+/**
+ * __lpfc_sli_release_iocbq_s3 - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ **/
+static void
+__lpfc_sli_release_iocbq_s3(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+	size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
+
+	/*
+	 * Clean all volatile data fields, preserve iotag and node struct.
+	 */
+	memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+	iocbq->sli4_xritag = NO_XRI;
+	list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
+}
+
+/**
  * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
  * @phba: Pointer to HBA context object.
  * @iocbq: Pointer to driver iocb object.
@@ -154,13 +630,7 @@
 static void
 __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 {
-	size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
-
-	/*
-	 * Clean all volatile data fields, preserve iotag and node struct.
-	 */
-	memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
-	list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
+	phba->__lpfc_sli_release_iocbq(phba, iocbq);
 }
 
 /**
@@ -281,6 +751,14 @@
 	case CMD_GEN_REQUEST64_CR:
 	case CMD_GEN_REQUEST64_CX:
 	case CMD_XMIT_ELS_RSP64_CX:
+	case DSSCMD_IWRITE64_CR:
+	case DSSCMD_IWRITE64_CX:
+	case DSSCMD_IREAD64_CR:
+	case DSSCMD_IREAD64_CX:
+	case DSSCMD_INVALIDATE_DEK:
+	case DSSCMD_SET_KEK:
+	case DSSCMD_GET_KEK_ID:
+	case DSSCMD_GEN_XFER:
 		type = LPFC_SOL_IOCB;
 		break;
 	case CMD_ABORT_XRI_CN:
@@ -348,7 +826,7 @@
 	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!pmb)
 		return -ENOMEM;
-	pmbox = &pmb->mb;
+	pmbox = &pmb->u.mb;
 	phba->link_state = LPFC_INIT_MBX_CMDS;
 	for (i = 0; i < psli->num_rings; i++) {
 		lpfc_config_ring(phba, i, pmb);
@@ -779,8 +1257,8 @@
 		phba->hbqs[i].buffer_count = 0;
 	}
 	/* Return all HBQ buffer that are in-fly */
-	list_for_each_entry_safe(dmabuf, next_dmabuf,
-			&phba->hbqbuf_in_list, list) {
+	list_for_each_entry_safe(dmabuf, next_dmabuf, &phba->rb_pend_list,
+				 list) {
 		hbq_buf = container_of(dmabuf, struct hbq_dmabuf, dbuf);
 		list_del(&hbq_buf->dbuf.list);
 		if (hbq_buf->tag == -1) {
@@ -814,10 +1292,28 @@
  * pointer to the hbq entry if it successfully post the buffer
  * else it will return NULL.
  **/
-static struct lpfc_hbq_entry *
+static int
 lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno,
 			 struct hbq_dmabuf *hbq_buf)
 {
+	return phba->lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buf);
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s3 - Post the hbq buffer to SLI3 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post a hbq buffer to the
+ * firmware. If the function finds an empty slot in the HBQ, it will post the
+ * buffer and place it on the hbq_buffer_list. The function will return zero if
+ * it successfully post the buffer else it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s3(struct lpfc_hba *phba, uint32_t hbqno,
+			    struct hbq_dmabuf *hbq_buf)
+{
 	struct lpfc_hbq_entry *hbqe;
 	dma_addr_t physaddr = hbq_buf->dbuf.phys;
 
@@ -838,8 +1334,40 @@
 				/* flush */
 		readl(phba->hbq_put + hbqno);
 		list_add_tail(&hbq_buf->dbuf.list, &hbqp->hbq_buffer_list);
-	}
-	return hbqe;
+		return 0;
+	} else
+		return -ENOMEM;
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s4 - Post the hbq buffer to SLI4 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post an RQE to the SLI4
+ * firmware. If able to post the RQE to the RQ it will queue the hbq entry to
+ * the hbq_buffer_list and return zero, otherwise it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s4(struct lpfc_hba *phba, uint32_t hbqno,
+			    struct hbq_dmabuf *hbq_buf)
+{
+	int rc;
+	struct lpfc_rqe hrqe;
+	struct lpfc_rqe drqe;
+
+	hrqe.address_lo = putPaddrLow(hbq_buf->hbuf.phys);
+	hrqe.address_hi = putPaddrHigh(hbq_buf->hbuf.phys);
+	drqe.address_lo = putPaddrLow(hbq_buf->dbuf.phys);
+	drqe.address_hi = putPaddrHigh(hbq_buf->dbuf.phys);
+	rc = lpfc_sli4_rq_put(phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+			      &hrqe, &drqe);
+	if (rc < 0)
+		return rc;
+	hbq_buf->tag = rc;
+	list_add_tail(&hbq_buf->dbuf.list, &phba->hbqs[hbqno].hbq_buffer_list);
+	return 0;
 }
 
 /* HBQ for ELS and CT traffic. */
@@ -914,7 +1442,7 @@
 				 dbuf.list);
 		hbq_buffer->tag = (phba->hbqs[hbqno].buffer_count |
 				      (hbqno << 16));
-		if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+		if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
 			phba->hbqs[hbqno].buffer_count++;
 			posted++;
 		} else
@@ -965,6 +1493,25 @@
 }
 
 /**
+ * lpfc_sli_hbqbuf_get - Remove the first hbq off of an hbq list
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ *
+ * This function removes the first hbq buffer on an hbq list and returns a
+ * pointer to that buffer. If it finds no buffers on the list it returns NULL.
+ **/
+static struct hbq_dmabuf *
+lpfc_sli_hbqbuf_get(struct list_head *rb_list)
+{
+	struct lpfc_dmabuf *d_buf;
+
+	list_remove_head(rb_list, d_buf, struct lpfc_dmabuf, list);
+	if (!d_buf)
+		return NULL;
+	return container_of(d_buf, struct hbq_dmabuf, dbuf);
+}
+
+/**
  * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag
  * @phba: Pointer to HBA context object.
  * @tag: Tag of the hbq buffer.
@@ -985,12 +1532,15 @@
 	if (hbqno >= LPFC_MAX_HBQS)
 		return NULL;
 
+	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry(d_buf, &phba->hbqs[hbqno].hbq_buffer_list, list) {
 		hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf);
 		if (hbq_buf->tag == tag) {
+			spin_unlock_irq(&phba->hbalock);
 			return hbq_buf;
 		}
 	}
+	spin_unlock_irq(&phba->hbalock);
 	lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_VPORT,
 			"1803 Bad hbq tag. Data: x%x x%x\n",
 			tag, phba->hbqs[tag >> 16].buffer_count);
@@ -1013,9 +1563,8 @@
 
 	if (hbq_buffer) {
 		hbqno = hbq_buffer->tag >> 16;
-		if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+		if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer))
 			(phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer);
-		}
 	}
 }
 
@@ -1086,6 +1635,15 @@
 	case MBX_HEARTBEAT:
 	case MBX_PORT_CAPABILITIES:
 	case MBX_PORT_IOV_CONTROL:
+	case MBX_SLI4_CONFIG:
+	case MBX_SLI4_REQ_FTRS:
+	case MBX_REG_FCFI:
+	case MBX_UNREG_FCFI:
+	case MBX_REG_VFI:
+	case MBX_UNREG_VFI:
+	case MBX_INIT_VPI:
+	case MBX_INIT_VFI:
+	case MBX_RESUME_RPI:
 		ret = mbxCommand;
 		break;
 	default:
@@ -1106,7 +1664,7 @@
  * will wake up thread waiting on the wait queue pointed by context1
  * of the mailbox.
  **/
-static void
+void
 lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 {
 	wait_queue_head_t *pdone_q;
@@ -1140,7 +1698,7 @@
 lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	struct lpfc_dmabuf *mp;
-	uint16_t rpi;
+	uint16_t rpi, vpi;
 	int rc;
 
 	mp = (struct lpfc_dmabuf *) (pmb->context1);
@@ -1150,24 +1708,30 @@
 		kfree(mp);
 	}
 
+	if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
+	    (phba->sli_rev == LPFC_SLI_REV4))
+		lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
+
 	/*
 	 * If a REG_LOGIN succeeded  after node is destroyed or node
 	 * is in re-discovery driver need to cleanup the RPI.
 	 */
 	if (!(phba->pport->load_flag & FC_UNLOADING) &&
-	    pmb->mb.mbxCommand == MBX_REG_LOGIN64 &&
-	    !pmb->mb.mbxStatus) {
-
-		rpi = pmb->mb.un.varWords[0];
-		lpfc_unreg_login(phba, pmb->mb.un.varRegLogin.vpi, rpi, pmb);
+	    pmb->u.mb.mbxCommand == MBX_REG_LOGIN64 &&
+	    !pmb->u.mb.mbxStatus) {
+		rpi = pmb->u.mb.un.varWords[0];
+		vpi = pmb->u.mb.un.varRegLogin.vpi - phba->vpi_base;
+		lpfc_unreg_login(phba, vpi, rpi, pmb);
 		pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
 		if (rc != MBX_NOT_FINISHED)
 			return;
 	}
 
-	mempool_free(pmb, phba->mbox_mem_pool);
-	return;
+	if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG)
+		lpfc_sli4_mbox_cmd_free(phba, pmb);
+	else
+		mempool_free(pmb, phba->mbox_mem_pool);
 }
 
 /**
@@ -1204,7 +1768,7 @@
 		if (pmb == NULL)
 			break;
 
-		pmbox = &pmb->mb;
+		pmbox = &pmb->u.mb;
 
 		if (pmbox->mbxCommand != MBX_HEARTBEAT) {
 			if (pmb->vport) {
@@ -1233,9 +1797,10 @@
 			/* Unknow mailbox command compl */
 			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
 					"(%d):0323 Unknown Mailbox command "
-					"%x Cmpl\n",
+					"x%x (x%x) Cmpl\n",
 					pmb->vport ? pmb->vport->vpi : 0,
-					pmbox->mbxCommand);
+					pmbox->mbxCommand,
+					lpfc_sli4_mbox_opcode_get(phba, pmb));
 			phba->link_state = LPFC_HBA_ERROR;
 			phba->work_hs = HS_FFER3;
 			lpfc_handle_eratt(phba);
@@ -1250,29 +1815,29 @@
 						LOG_MBOX | LOG_SLI,
 						"(%d):0305 Mbox cmd cmpl "
 						"error - RETRYing Data: x%x "
-						"x%x x%x x%x\n",
+						"(x%x) x%x x%x x%x\n",
 						pmb->vport ? pmb->vport->vpi :0,
 						pmbox->mbxCommand,
+						lpfc_sli4_mbox_opcode_get(phba,
+									  pmb),
 						pmbox->mbxStatus,
 						pmbox->un.varWords[0],
 						pmb->vport->port_state);
 				pmbox->mbxStatus = 0;
 				pmbox->mbxOwner = OWN_HOST;
-				spin_lock_irq(&phba->hbalock);
-				phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
-				spin_unlock_irq(&phba->hbalock);
 				rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
-				if (rc == MBX_SUCCESS)
+				if (rc != MBX_NOT_FINISHED)
 					continue;
 			}
 		}
 
 		/* Mailbox cmd <cmd> Cmpl <cmpl> */
 		lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
-				"(%d):0307 Mailbox cmd x%x Cmpl x%p "
+				"(%d):0307 Mailbox cmd x%x (x%x) Cmpl x%p "
 				"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
 				pmb->vport ? pmb->vport->vpi : 0,
 				pmbox->mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, pmb),
 				pmb->mbox_cmpl,
 				*((uint32_t *) pmbox),
 				pmbox->un.varWords[0],
@@ -1317,6 +1882,45 @@
 	return &hbq_entry->dbuf;
 }
 
+/**
+ * lpfc_complete_unsol_iocb - Complete an unsolicited sequence
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @saveq: Pointer to the iocbq struct representing the sequence starting frame.
+ * @fch_r_ctl: the r_ctl for the first frame of the sequence.
+ * @fch_type: the type for the first frame of the sequence.
+ *
+ * This function is called with no lock held. This function uses the r_ctl and
+ * type of the received sequence to find the correct callback function to call
+ * to process the sequence.
+ **/
+static int
+lpfc_complete_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			 struct lpfc_iocbq *saveq, uint32_t fch_r_ctl,
+			 uint32_t fch_type)
+{
+	int i;
+
+	/* unSolicited Responses */
+	if (pring->prt[0].profile) {
+		if (pring->prt[0].lpfc_sli_rcv_unsol_event)
+			(pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
+									saveq);
+		return 1;
+	}
+	/* We must search, based on rctl / type
+	   for the right routine */
+	for (i = 0; i < pring->num_mask; i++) {
+		if ((pring->prt[i].rctl == fch_r_ctl) &&
+		    (pring->prt[i].type == fch_type)) {
+			if (pring->prt[i].lpfc_sli_rcv_unsol_event)
+				(pring->prt[i].lpfc_sli_rcv_unsol_event)
+						(phba, pring, saveq);
+			return 1;
+		}
+	}
+	return 0;
+}
 
 /**
  * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler
@@ -1339,7 +1943,7 @@
 	IOCB_t           * irsp;
 	WORD5            * w5p;
 	uint32_t           Rctl, Type;
-	uint32_t           match, i;
+	uint32_t           match;
 	struct lpfc_iocbq *iocbq;
 	struct lpfc_dmabuf *dmzbuf;
 
@@ -1482,35 +2086,12 @@
 		}
 	}
 
-	/* unSolicited Responses */
-	if (pring->prt[0].profile) {
-		if (pring->prt[0].lpfc_sli_rcv_unsol_event)
-			(pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
-									saveq);
-		match = 1;
-	} else {
-		/* We must search, based on rctl / type
-		   for the right routine */
-		for (i = 0; i < pring->num_mask; i++) {
-			if ((pring->prt[i].rctl == Rctl)
-			    && (pring->prt[i].type == Type)) {
-				if (pring->prt[i].lpfc_sli_rcv_unsol_event)
-					(pring->prt[i].lpfc_sli_rcv_unsol_event)
-							(phba, pring, saveq);
-				match = 1;
-				break;
-			}
-		}
-	}
-	if (match == 0) {
-		/* Unexpected Rctl / Type received */
-		/* Ring <ringno> handler: unexpected
-		   Rctl <Rctl> Type <Type> received */
+	if (!lpfc_complete_unsol_iocb(phba, pring, saveq, Rctl, Type))
 		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 				"0313 Ring %d handler: unexpected Rctl x%x "
 				"Type x%x received\n",
 				pring->ringno, Rctl, Type);
-	}
+
 	return 1;
 }
 
@@ -1552,6 +2133,37 @@
 }
 
 /**
+ * lpfc_sli_iocbq_lookup_by_tag - Find command iocb for the iotag
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @iotag: IOCB tag.
+ *
+ * This function looks up the iocb_lookup table to get the command iocb
+ * corresponding to the given iotag. This function is called with the
+ * hbalock held.
+ * This function returns the command iocb object if it finds the command
+ * iocb else returns NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_iocbq_lookup_by_tag(struct lpfc_hba *phba,
+			     struct lpfc_sli_ring *pring, uint16_t iotag)
+{
+	struct lpfc_iocbq *cmd_iocb;
+
+	if (iotag != 0 && iotag <= phba->sli.last_iotag) {
+		cmd_iocb = phba->sli.iocbq_lookup[iotag];
+		list_del_init(&cmd_iocb->list);
+		pring->txcmplq_cnt--;
+		return cmd_iocb;
+	}
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"0372 iotag x%x is out off range: max iotag (x%x)\n",
+			iotag, phba->sli.last_iotag);
+	return NULL;
+}
+
+/**
  * lpfc_sli_process_sol_iocb - process solicited iocb completion
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
@@ -1954,7 +2566,7 @@
 			if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
 				(irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
 				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				lpfc_rampdown_queue_depth(phba);
+				phba->lpfc_rampdown_queue_depth(phba);
 				spin_lock_irqsave(&phba->hbalock, iflag);
 			}
 
@@ -2068,39 +2680,215 @@
 }
 
 /**
- * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings
+ * lpfc_sli_sp_handle_rspiocb - Handle slow-path response iocb
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @rspiocbp: Pointer to driver response IOCB object.
+ *
+ * This function is called from the worker thread when there is a slow-path
+ * response IOCB to process. This function chains all the response iocbs until
+ * seeing the iocb with the LE bit set. The function will call
+ * lpfc_sli_process_sol_iocb function if the response iocb indicates a
+ * completion of a command iocb. The function will call the
+ * lpfc_sli_process_unsol_iocb function if this is an unsolicited iocb.
+ * The function frees the resources or calls the completion handler if this
+ * iocb is an abort completion. The function returns NULL when the response
+ * iocb has the LE bit set and all the chained iocbs are processed, otherwise
+ * this function shall chain the iocb on to the iocb_continueq and return the
+ * response iocb passed in.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			struct lpfc_iocbq *rspiocbp)
+{
+	struct lpfc_iocbq *saveq;
+	struct lpfc_iocbq *cmdiocbp;
+	struct lpfc_iocbq *next_iocb;
+	IOCB_t *irsp = NULL;
+	uint32_t free_saveq;
+	uint8_t iocb_cmd_type;
+	lpfc_iocb_type type;
+	unsigned long iflag;
+	int rc;
+
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	/* First add the response iocb to the countinueq list */
+	list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
+	pring->iocb_continueq_cnt++;
+
+	/* Now, determine whetehr the list is completed for processing */
+	irsp = &rspiocbp->iocb;
+	if (irsp->ulpLe) {
+		/*
+		 * By default, the driver expects to free all resources
+		 * associated with this iocb completion.
+		 */
+		free_saveq = 1;
+		saveq = list_get_first(&pring->iocb_continueq,
+				       struct lpfc_iocbq, list);
+		irsp = &(saveq->iocb);
+		list_del_init(&pring->iocb_continueq);
+		pring->iocb_continueq_cnt = 0;
+
+		pring->stats.iocb_rsp++;
+
+		/*
+		 * If resource errors reported from HBA, reduce
+		 * queuedepths of the SCSI device.
+		 */
+		if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+		    (irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			phba->lpfc_rampdown_queue_depth(phba);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+		}
+
+		if (irsp->ulpStatus) {
+			/* Rsp ring <ringno> error: IOCB */
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0328 Rsp Ring %d error: "
+					"IOCB Data: "
+					"x%x x%x x%x x%x "
+					"x%x x%x x%x x%x "
+					"x%x x%x x%x x%x "
+					"x%x x%x x%x x%x\n",
+					pring->ringno,
+					irsp->un.ulpWord[0],
+					irsp->un.ulpWord[1],
+					irsp->un.ulpWord[2],
+					irsp->un.ulpWord[3],
+					irsp->un.ulpWord[4],
+					irsp->un.ulpWord[5],
+					*(((uint32_t *) irsp) + 6),
+					*(((uint32_t *) irsp) + 7),
+					*(((uint32_t *) irsp) + 8),
+					*(((uint32_t *) irsp) + 9),
+					*(((uint32_t *) irsp) + 10),
+					*(((uint32_t *) irsp) + 11),
+					*(((uint32_t *) irsp) + 12),
+					*(((uint32_t *) irsp) + 13),
+					*(((uint32_t *) irsp) + 14),
+					*(((uint32_t *) irsp) + 15));
+		}
+
+		/*
+		 * Fetch the IOCB command type and call the correct completion
+		 * routine. Solicited and Unsolicited IOCBs on the ELS ring
+		 * get freed back to the lpfc_iocb_list by the discovery
+		 * kernel thread.
+		 */
+		iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
+		type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
+		switch (type) {
+		case LPFC_SOL_IOCB:
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			rc = lpfc_sli_process_sol_iocb(phba, pring, saveq);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+			break;
+
+		case LPFC_UNSOL_IOCB:
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			rc = lpfc_sli_process_unsol_iocb(phba, pring, saveq);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+			if (!rc)
+				free_saveq = 0;
+			break;
+
+		case LPFC_ABORT_IOCB:
+			cmdiocbp = NULL;
+			if (irsp->ulpCommand != CMD_XRI_ABORTED_CX)
+				cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring,
+								 saveq);
+			if (cmdiocbp) {
+				/* Call the specified completion routine */
+				if (cmdiocbp->iocb_cmpl) {
+					spin_unlock_irqrestore(&phba->hbalock,
+							       iflag);
+					(cmdiocbp->iocb_cmpl)(phba, cmdiocbp,
+							      saveq);
+					spin_lock_irqsave(&phba->hbalock,
+							  iflag);
+				} else
+					__lpfc_sli_release_iocbq(phba,
+								 cmdiocbp);
+			}
+			break;
+
+		case LPFC_UNKNOWN_IOCB:
+			if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
+				char adaptermsg[LPFC_MAX_ADPTMSG];
+				memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
+				memcpy(&adaptermsg[0], (uint8_t *)irsp,
+				       MAX_MSG_DATA);
+				dev_warn(&((phba->pcidev)->dev),
+					 "lpfc%d: %s\n",
+					 phba->brd_no, adaptermsg);
+			} else {
+				/* Unknown IOCB command */
+				lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+						"0335 Unknown IOCB "
+						"command Data: x%x "
+						"x%x x%x x%x\n",
+						irsp->ulpCommand,
+						irsp->ulpStatus,
+						irsp->ulpIoTag,
+						irsp->ulpContext);
+			}
+			break;
+		}
+
+		if (free_saveq) {
+			list_for_each_entry_safe(rspiocbp, next_iocb,
+						 &saveq->list, list) {
+				list_del(&rspiocbp->list);
+				__lpfc_sli_release_iocbq(phba, rspiocbp);
+			}
+			__lpfc_sli_release_iocbq(phba, saveq);
+		}
+		rspiocbp = NULL;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return rspiocbp;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event - Wrapper func for handling slow-path iocbs
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @mask: Host attention register mask for this ring.
  *
- * This function is called from the worker thread when there is a ring
- * event for non-fcp rings. The caller does not hold any lock .
- * The function processes each response iocb in the response ring until it
- * finds an iocb with LE bit set and chains all the iocbs upto the iocb with
- * LE bit set. The function will call lpfc_sli_process_sol_iocb function if the
- * response iocb indicates a completion of a command iocb. The function
- * will call lpfc_sli_process_unsol_iocb function if this is an unsolicited
- * iocb. The function frees the resources or calls the completion handler if
- * this iocb is an abort completion. The function returns 0 when the allocated
- * iocbs are not freed, otherwise returns 1.
+ * This routine wraps the actual slow_ring event process routine from the
+ * API jump table function pointer from the lpfc_hba struct.
  **/
-int
+void
 lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 				struct lpfc_sli_ring *pring, uint32_t mask)
 {
+	phba->lpfc_sli_handle_slow_ring_event(phba, pring, mask);
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s3 - Handle SLI3 ring event for non-FCP rings
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a ring event
+ * for non-fcp rings. The caller does not hold any lock. The function will
+ * remove each response iocb in the response ring and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s3(struct lpfc_hba *phba,
+				   struct lpfc_sli_ring *pring, uint32_t mask)
+{
 	struct lpfc_pgp *pgp;
 	IOCB_t *entry;
 	IOCB_t *irsp = NULL;
 	struct lpfc_iocbq *rspiocbp = NULL;
-	struct lpfc_iocbq *next_iocb;
-	struct lpfc_iocbq *cmdiocbp;
-	struct lpfc_iocbq *saveq;
-	uint8_t iocb_cmd_type;
-	lpfc_iocb_type type;
-	uint32_t status, free_saveq;
 	uint32_t portRspPut, portRspMax;
-	int rc = 1;
 	unsigned long iflag;
+	uint32_t status;
 
 	pgp = &phba->port_gp[pring->ringno];
 	spin_lock_irqsave(&phba->hbalock, iflag);
@@ -2128,7 +2916,7 @@
 		phba->work_hs = HS_FFER3;
 		lpfc_handle_eratt(phba);
 
-		return 1;
+		return;
 	}
 
 	rmb();
@@ -2173,138 +2961,10 @@
 
 		writel(pring->rspidx, &phba->host_gp[pring->ringno].rspGetInx);
 
-		list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
-
-		pring->iocb_continueq_cnt++;
-		if (irsp->ulpLe) {
-			/*
-			 * By default, the driver expects to free all resources
-			 * associated with this iocb completion.
-			 */
-			free_saveq = 1;
-			saveq = list_get_first(&pring->iocb_continueq,
-					       struct lpfc_iocbq, list);
-			irsp = &(saveq->iocb);
-			list_del_init(&pring->iocb_continueq);
-			pring->iocb_continueq_cnt = 0;
-
-			pring->stats.iocb_rsp++;
-
-			/*
-			 * If resource errors reported from HBA, reduce
-			 * queuedepths of the SCSI device.
-			 */
-			if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
-			     (irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
-				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				lpfc_rampdown_queue_depth(phba);
-				spin_lock_irqsave(&phba->hbalock, iflag);
-			}
-
-			if (irsp->ulpStatus) {
-				/* Rsp ring <ringno> error: IOCB */
-				lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
-						"0328 Rsp Ring %d error: "
-						"IOCB Data: "
-						"x%x x%x x%x x%x "
-						"x%x x%x x%x x%x "
-						"x%x x%x x%x x%x "
-						"x%x x%x x%x x%x\n",
-						pring->ringno,
-						irsp->un.ulpWord[0],
-						irsp->un.ulpWord[1],
-						irsp->un.ulpWord[2],
-						irsp->un.ulpWord[3],
-						irsp->un.ulpWord[4],
-						irsp->un.ulpWord[5],
-						*(((uint32_t *) irsp) + 6),
-						*(((uint32_t *) irsp) + 7),
-						*(((uint32_t *) irsp) + 8),
-						*(((uint32_t *) irsp) + 9),
-						*(((uint32_t *) irsp) + 10),
-						*(((uint32_t *) irsp) + 11),
-						*(((uint32_t *) irsp) + 12),
-						*(((uint32_t *) irsp) + 13),
-						*(((uint32_t *) irsp) + 14),
-						*(((uint32_t *) irsp) + 15));
-			}
-
-			/*
-			 * Fetch the IOCB command type and call the correct
-			 * completion routine.  Solicited and Unsolicited
-			 * IOCBs on the ELS ring get freed back to the
-			 * lpfc_iocb_list by the discovery kernel thread.
-			 */
-			iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
-			type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
-			if (type == LPFC_SOL_IOCB) {
-				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				rc = lpfc_sli_process_sol_iocb(phba, pring,
-							       saveq);
-				spin_lock_irqsave(&phba->hbalock, iflag);
-			} else if (type == LPFC_UNSOL_IOCB) {
-				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				rc = lpfc_sli_process_unsol_iocb(phba, pring,
-								 saveq);
-				spin_lock_irqsave(&phba->hbalock, iflag);
-				if (!rc)
-					free_saveq = 0;
-			} else if (type == LPFC_ABORT_IOCB) {
-				if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) &&
-				    ((cmdiocbp =
-				      lpfc_sli_iocbq_lookup(phba, pring,
-							    saveq)))) {
-					/* Call the specified completion
-					   routine */
-					if (cmdiocbp->iocb_cmpl) {
-						spin_unlock_irqrestore(
-						       &phba->hbalock,
-						       iflag);
-						(cmdiocbp->iocb_cmpl) (phba,
-							     cmdiocbp, saveq);
-						spin_lock_irqsave(
-							  &phba->hbalock,
-							  iflag);
-					} else
-						__lpfc_sli_release_iocbq(phba,
-								      cmdiocbp);
-				}
-			} else if (type == LPFC_UNKNOWN_IOCB) {
-				if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
-
-					char adaptermsg[LPFC_MAX_ADPTMSG];
-
-					memset(adaptermsg, 0,
-					       LPFC_MAX_ADPTMSG);
-					memcpy(&adaptermsg[0], (uint8_t *) irsp,
-					       MAX_MSG_DATA);
-					dev_warn(&((phba->pcidev)->dev),
-						 "lpfc%d: %s\n",
-						 phba->brd_no, adaptermsg);
-				} else {
-					/* Unknown IOCB command */
-					lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-							"0335 Unknown IOCB "
-							"command Data: x%x "
-							"x%x x%x x%x\n",
-							irsp->ulpCommand,
-							irsp->ulpStatus,
-							irsp->ulpIoTag,
-							irsp->ulpContext);
-				}
-			}
-
-			if (free_saveq) {
-				list_for_each_entry_safe(rspiocbp, next_iocb,
-							 &saveq->list, list) {
-					list_del(&rspiocbp->list);
-					__lpfc_sli_release_iocbq(phba,
-								 rspiocbp);
-				}
-				__lpfc_sli_release_iocbq(phba, saveq);
-			}
-			rspiocbp = NULL;
-		}
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		/* Handle the response IOCB */
+		rspiocbp = lpfc_sli_sp_handle_rspiocb(phba, pring, rspiocbp);
+		spin_lock_irqsave(&phba->hbalock, iflag);
 
 		/*
 		 * If the port response put pointer has not been updated, sync
@@ -2338,7 +2998,37 @@
 	}
 
 	spin_unlock_irqrestore(&phba->hbalock, iflag);
-	return rc;
+	return;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s4 - Handle SLI4 slow-path els events
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a pending
+ * ELS response iocb on the driver internal slow-path response iocb worker
+ * queue. The caller does not hold any lock. The function will remove each
+ * response iocb from the response worker queue and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s4(struct lpfc_hba *phba,
+				   struct lpfc_sli_ring *pring, uint32_t mask)
+{
+	struct lpfc_iocbq *irspiocbq;
+	unsigned long iflag;
+
+	while (!list_empty(&phba->sli4_hba.sp_rspiocb_work_queue)) {
+		/* Get the response iocb from the head of work queue */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		list_remove_head(&phba->sli4_hba.sp_rspiocb_work_queue,
+				 irspiocbq, struct lpfc_iocbq, list);
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		/* Process the response iocb */
+		lpfc_sli_sp_handle_rspiocb(phba, pring, irspiocbq);
+	}
 }
 
 /**
@@ -2420,7 +3110,7 @@
 }
 
 /**
- * lpfc_sli_brdready - Check for host status bits
+ * lpfc_sli_brdready_s3 - Check for sli3 host ready status
  * @phba: Pointer to HBA context object.
  * @mask: Bit mask to be checked.
  *
@@ -2432,8 +3122,8 @@
  * function returns 1 when HBA fail to restart otherwise returns
  * zero.
  **/
-int
-lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+static int
+lpfc_sli_brdready_s3(struct lpfc_hba *phba, uint32_t mask)
 {
 	uint32_t status;
 	int i = 0;
@@ -2477,6 +3167,56 @@
 	return retval;
 }
 
+/**
+ * lpfc_sli_brdready_s4 - Check for sli4 host ready status
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This function checks the host status register to check if HBA is
+ * ready. This function will wait in a loop for the HBA to be ready
+ * If the HBA is not ready , the function will will reset the HBA PCI
+ * function again. The function returns 1 when HBA fail to be ready
+ * otherwise returns zero.
+ **/
+static int
+lpfc_sli_brdready_s4(struct lpfc_hba *phba, uint32_t mask)
+{
+	uint32_t status;
+	int retval = 0;
+
+	/* Read the HBA Host Status Register */
+	status = lpfc_sli4_post_status_check(phba);
+
+	if (status) {
+		phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+		lpfc_sli_brdrestart(phba);
+		status = lpfc_sli4_post_status_check(phba);
+	}
+
+	/* Check to see if any errors occurred during init */
+	if (status) {
+		phba->link_state = LPFC_HBA_ERROR;
+		retval = 1;
+	} else
+		phba->sli4_hba.intr_enable = 0;
+
+	return retval;
+}
+
+/**
+ * lpfc_sli_brdready - Wrapper func for checking the hba readyness
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba readyness check routine
+ * from the API jump table function pointer from the lpfc_hba struct.
+ **/
+int
+lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+{
+	return phba->lpfc_sli_brdready(phba, mask);
+}
+
 #define BARRIER_TEST_PATTERN (0xdeadbeef)
 
 /**
@@ -2532,7 +3272,7 @@
 		mdelay(1);
 
 	if (readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN)) {
-		if (phba->sli.sli_flag & LPFC_SLI2_ACTIVE ||
+		if (phba->sli.sli_flag & LPFC_SLI_ACTIVE ||
 		    phba->pport->stopped)
 			goto restore_hc;
 		else
@@ -2613,7 +3353,9 @@
 		return 1;
 	}
 
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
+	spin_unlock_irq(&phba->hbalock);
 
 	mempool_free(pmb, phba->mbox_mem_pool);
 
@@ -2636,10 +3378,10 @@
 	}
 	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	psli->mbox_active = NULL;
 	phba->link_flag &= ~LS_IGNORE_ERATT;
 	spin_unlock_irq(&phba->hbalock);
 
-	psli->mbox_active = NULL;
 	lpfc_hba_down_post(phba);
 	phba->link_state = LPFC_HBA_ERROR;
 
@@ -2647,7 +3389,7 @@
 }
 
 /**
- * lpfc_sli_brdreset - Reset the HBA
+ * lpfc_sli_brdreset - Reset a sli-2 or sli-3 HBA
  * @phba: Pointer to HBA context object.
  *
  * This function resets the HBA by writing HC_INITFF to the control
@@ -2683,7 +3425,8 @@
 			      (cfg_value &
 			       ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
 
-	psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA);
+	psli->sli_flag &= ~(LPFC_SLI_ACTIVE | LPFC_PROCESS_LA);
+
 	/* Now toggle INITFF bit in the Host Control Register */
 	writel(HC_INITFF, phba->HCregaddr);
 	mdelay(1);
@@ -2710,7 +3453,66 @@
 }
 
 /**
- * lpfc_sli_brdrestart - Restart the HBA
+ * lpfc_sli4_brdreset - Reset a sli-4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function resets a SLI4 HBA. This function disables PCI layer parity
+ * checking during resets the device. The caller is not required to hold
+ * any locks.
+ *
+ * This function returns 0 always.
+ **/
+int
+lpfc_sli4_brdreset(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	uint16_t cfg_value;
+	uint8_t qindx;
+
+	/* Reset HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0295 Reset HBA Data: x%x x%x\n",
+			phba->pport->port_state, psli->sli_flag);
+
+	/* perform board reset */
+	phba->fc_eventTag = 0;
+	phba->pport->fc_myDID = 0;
+	phba->pport->fc_prevDID = 0;
+
+	/* Turn off parity checking and serr during the physical reset */
+	pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
+	pci_write_config_word(phba->pcidev, PCI_COMMAND,
+			      (cfg_value &
+			      ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
+
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag &= ~(LPFC_PROCESS_LA);
+	phba->fcf.fcf_flag = 0;
+	/* Clean up the child queue list for the CQs */
+	list_del_init(&phba->sli4_hba.mbx_wq->list);
+	list_del_init(&phba->sli4_hba.els_wq->list);
+	list_del_init(&phba->sli4_hba.hdr_rq->list);
+	list_del_init(&phba->sli4_hba.dat_rq->list);
+	list_del_init(&phba->sli4_hba.mbx_cq->list);
+	list_del_init(&phba->sli4_hba.els_cq->list);
+	list_del_init(&phba->sli4_hba.rxq_cq->list);
+	for (qindx = 0; qindx < phba->cfg_fcp_wq_count; qindx++)
+		list_del_init(&phba->sli4_hba.fcp_wq[qindx]->list);
+	for (qindx = 0; qindx < phba->cfg_fcp_eq_count; qindx++)
+		list_del_init(&phba->sli4_hba.fcp_cq[qindx]->list);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Now physically reset the device */
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0389 Performing PCI function reset!\n");
+	/* Perform FCoE PCI function reset */
+	lpfc_pci_function_reset(phba);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart_s3 - Restart a sli-3 hba
  * @phba: Pointer to HBA context object.
  *
  * This function is called in the SLI initialization code path to
@@ -2722,8 +3524,8 @@
  * The function does not guarantee completion of MBX_RESTART mailbox
  * command before the return of this function.
  **/
-int
-lpfc_sli_brdrestart(struct lpfc_hba *phba)
+static int
+lpfc_sli_brdrestart_s3(struct lpfc_hba *phba)
 {
 	MAILBOX_t *mb;
 	struct lpfc_sli *psli;
@@ -2762,7 +3564,7 @@
 	lpfc_sli_brdreset(phba);
 	phba->pport->stopped = 0;
 	phba->link_state = LPFC_INIT_START;
-
+	phba->hba_flag = 0;
 	spin_unlock_irq(&phba->hbalock);
 
 	memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
@@ -2777,6 +3579,55 @@
 }
 
 /**
+ * lpfc_sli_brdrestart_s4 - Restart the sli-4 hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI initialization code path to restart
+ * a SLI4 HBA. The caller is not required to hold any lock.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static int
+lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+
+
+	/* Restart HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0296 Restart HBA Data: x%x x%x\n",
+			phba->pport->port_state, psli->sli_flag);
+
+	lpfc_sli4_brdreset(phba);
+
+	spin_lock_irq(&phba->hbalock);
+	phba->pport->stopped = 0;
+	phba->link_state = LPFC_INIT_START;
+	phba->hba_flag = 0;
+	spin_unlock_irq(&phba->hbalock);
+
+	memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
+	psli->stats_start = get_seconds();
+
+	lpfc_hba_down_post(phba);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart - Wrapper func for restarting hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba restart routine from the
+ * API jump table function pointer from the lpfc_hba struct.
+**/
+int
+lpfc_sli_brdrestart(struct lpfc_hba *phba)
+{
+	return phba->lpfc_sli_brdrestart(phba);
+}
+
+/**
  * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
  * @phba: Pointer to HBA context object.
  *
@@ -2940,7 +3791,7 @@
 	if (!pmb)
 		return -ENOMEM;
 
-	pmbox = &pmb->mb;
+	pmbox = &pmb->u.mb;
 
 	/* Initialize the struct lpfc_sli_hbq structure for each hbq */
 	phba->link_state = LPFC_INIT_MBX_CMDS;
@@ -2984,6 +3835,26 @@
 }
 
 /**
+ * lpfc_sli4_rb_setup - Initialize and post RBs to HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called during the SLI initialization to configure
+ * all the HBQs and post buffers to the HBQ. The caller is not
+ * required to hold any locks. This function will return zero if successful
+ * else it will return negative error code.
+ **/
+static int
+lpfc_sli4_rb_setup(struct lpfc_hba *phba)
+{
+	phba->hbq_in_use = 1;
+	phba->hbqs[0].entry_count = lpfc_hbq_defs[0]->entry_count;
+	phba->hbq_count = 1;
+	/* Initially populate or replenish the HBQs */
+	lpfc_sli_hbqbuf_init_hbqs(phba, 0);
+	return 0;
+}
+
+/**
  * lpfc_sli_config_port - Issue config port mailbox command
  * @phba: Pointer to HBA context object.
  * @sli_mode: sli mode - 2/3
@@ -3047,33 +3918,43 @@
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0442 Adapter failed to init, mbxCmd x%x "
 				"CONFIG_PORT, mbxStatus x%x Data: x%x\n",
-				pmb->mb.mbxCommand, pmb->mb.mbxStatus, 0);
+				pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus, 0);
 			spin_lock_irq(&phba->hbalock);
-			phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
+			phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
 			spin_unlock_irq(&phba->hbalock);
 			rc = -ENXIO;
-		} else
+		} else {
+			/* Allow asynchronous mailbox command to go through */
+			spin_lock_irq(&phba->hbalock);
+			phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+			spin_unlock_irq(&phba->hbalock);
 			done = 1;
+		}
 	}
 	if (!done) {
 		rc = -EINVAL;
 		goto do_prep_failed;
 	}
-	if (pmb->mb.un.varCfgPort.sli_mode == 3) {
-		if (!pmb->mb.un.varCfgPort.cMA) {
+	if (pmb->u.mb.un.varCfgPort.sli_mode == 3) {
+		if (!pmb->u.mb.un.varCfgPort.cMA) {
 			rc = -ENXIO;
 			goto do_prep_failed;
 		}
-		if (phba->max_vpi && pmb->mb.un.varCfgPort.gmv) {
+		if (phba->max_vpi && pmb->u.mb.un.varCfgPort.gmv) {
 			phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
-			phba->max_vpi = pmb->mb.un.varCfgPort.max_vpi;
+			phba->max_vpi = pmb->u.mb.un.varCfgPort.max_vpi;
+			phba->max_vports = (phba->max_vpi > phba->max_vports) ?
+				phba->max_vpi : phba->max_vports;
+
 		} else
 			phba->max_vpi = 0;
-		if (pmb->mb.un.varCfgPort.gerbm)
+		if (pmb->u.mb.un.varCfgPort.gdss)
+			phba->sli3_options |= LPFC_SLI3_DSS_ENABLED;
+		if (pmb->u.mb.un.varCfgPort.gerbm)
 			phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
-		if (pmb->mb.un.varCfgPort.gcrp)
+		if (pmb->u.mb.un.varCfgPort.gcrp)
 			phba->sli3_options |= LPFC_SLI3_CRP_ENABLED;
-		if (pmb->mb.un.varCfgPort.ginb) {
+		if (pmb->u.mb.un.varCfgPort.ginb) {
 			phba->sli3_options |= LPFC_SLI3_INB_ENABLED;
 			phba->hbq_get = phba->mbox->us.s3_inb_pgp.hbq_get;
 			phba->port_gp = phba->mbox->us.s3_inb_pgp.port;
@@ -3089,7 +3970,7 @@
 		}
 
 		if (phba->cfg_enable_bg) {
-			if (pmb->mb.un.varCfgPort.gbg)
+			if (pmb->u.mb.un.varCfgPort.gbg)
 				phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
 			else
 				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -3184,8 +4065,9 @@
 		if (rc)
 			goto lpfc_sli_hba_setup_error;
 	}
-
+	spin_lock_irq(&phba->hbalock);
 	phba->sli.sli_flag |= LPFC_PROCESS_LA;
+	spin_unlock_irq(&phba->hbalock);
 
 	rc = lpfc_config_port_post(phba);
 	if (rc)
@@ -3200,6 +4082,488 @@
 	return rc;
 }
 
+/**
+ * lpfc_sli4_read_fcoe_params - Read fcoe params from conf region
+ * @phba: Pointer to HBA context object.
+ * @mboxq: mailbox pointer.
+ * This function issue a dump mailbox command to read config region
+ * 23 and parse the records in the region and populate driver
+ * data structure.
+ **/
+static int
+lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,
+		LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_dmabuf *mp;
+	struct lpfc_mqe *mqe;
+	uint32_t data_length;
+	int rc;
+
+	/* Program the default value of vlan_id and fc_map */
+	phba->valid_vlan = 0;
+	phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+	phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+	phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+	mqe = &mboxq->u.mqe;
+	if (lpfc_dump_fcoe_param(phba, mboxq))
+		return -ENOMEM;
+
+	mp = (struct lpfc_dmabuf *) mboxq->context1;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):2571 Mailbox cmd x%x Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			bf_get(lpfc_mqe_command, mqe),
+			bf_get(lpfc_mqe_status, mqe),
+			mqe->un.mb_words[0], mqe->un.mb_words[1],
+			mqe->un.mb_words[2], mqe->un.mb_words[3],
+			mqe->un.mb_words[4], mqe->un.mb_words[5],
+			mqe->un.mb_words[6], mqe->un.mb_words[7],
+			mqe->un.mb_words[8], mqe->un.mb_words[9],
+			mqe->un.mb_words[10], mqe->un.mb_words[11],
+			mqe->un.mb_words[12], mqe->un.mb_words[13],
+			mqe->un.mb_words[14], mqe->un.mb_words[15],
+			mqe->un.mb_words[16], mqe->un.mb_words[50],
+			mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+
+	if (rc) {
+		lpfc_mbuf_free(phba, mp->virt, mp->phys);
+		kfree(mp);
+		return -EIO;
+	}
+	data_length = mqe->un.mb_words[5];
+	if (data_length > DMP_FCOEPARAM_RGN_SIZE)
+		return -EIO;
+
+	lpfc_parse_fcoe_conf(phba, mp->virt, data_length);
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+	return 0;
+}
+
+/**
+ * lpfc_sli4_read_rev - Issue READ_REV and collect vpd data
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the LPFC_MBOXQ_t structure.
+ * @vpd: pointer to the memory to hold resulting port vpd data.
+ * @vpd_size: On input, the number of bytes allocated to @vpd.
+ *	      On output, the number of data bytes in @vpd.
+ *
+ * This routine executes a READ_REV SLI4 mailbox command.  In
+ * addition, this routine gets the port vpd data.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+		    uint8_t *vpd, uint32_t *vpd_size)
+{
+	int rc = 0;
+	uint32_t dma_size;
+	struct lpfc_dmabuf *dmabuf;
+	struct lpfc_mqe *mqe;
+
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	/*
+	 * Get a DMA buffer for the vpd data resulting from the READ_REV
+	 * mailbox command.
+	 */
+	dma_size = *vpd_size;
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+					  dma_size,
+					  &dmabuf->phys,
+					  GFP_KERNEL);
+	if (!dmabuf->virt) {
+		kfree(dmabuf);
+		return -ENOMEM;
+	}
+	memset(dmabuf->virt, 0, dma_size);
+
+	/*
+	 * The SLI4 implementation of READ_REV conflicts at word1,
+	 * bits 31:16 and SLI4 adds vpd functionality not present
+	 * in SLI3.  This code corrects the conflicts.
+	 */
+	lpfc_read_rev(phba, mboxq);
+	mqe = &mboxq->u.mqe;
+	mqe->un.read_rev.vpd_paddr_high = putPaddrHigh(dmabuf->phys);
+	mqe->un.read_rev.vpd_paddr_low = putPaddrLow(dmabuf->phys);
+	mqe->un.read_rev.word1 &= 0x0000FFFF;
+	bf_set(lpfc_mbx_rd_rev_vpd, &mqe->un.read_rev, 1);
+	bf_set(lpfc_mbx_rd_rev_avail_len, &mqe->un.read_rev, dma_size);
+
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (rc) {
+		dma_free_coherent(&phba->pcidev->dev, dma_size,
+				  dmabuf->virt, dmabuf->phys);
+		return -EIO;
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0380 Mailbox cmd x%x Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			bf_get(lpfc_mqe_command, mqe),
+			bf_get(lpfc_mqe_status, mqe),
+			mqe->un.mb_words[0], mqe->un.mb_words[1],
+			mqe->un.mb_words[2], mqe->un.mb_words[3],
+			mqe->un.mb_words[4], mqe->un.mb_words[5],
+			mqe->un.mb_words[6], mqe->un.mb_words[7],
+			mqe->un.mb_words[8], mqe->un.mb_words[9],
+			mqe->un.mb_words[10], mqe->un.mb_words[11],
+			mqe->un.mb_words[12], mqe->un.mb_words[13],
+			mqe->un.mb_words[14], mqe->un.mb_words[15],
+			mqe->un.mb_words[16], mqe->un.mb_words[50],
+			mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+
+	/*
+	 * The available vpd length cannot be bigger than the
+	 * DMA buffer passed to the port.  Catch the less than
+	 * case and update the caller's size.
+	 */
+	if (mqe->un.read_rev.avail_vpd_len < *vpd_size)
+		*vpd_size = mqe->un.read_rev.avail_vpd_len;
+
+	lpfc_sli_pcimem_bcopy(dmabuf->virt, vpd, *vpd_size);
+	dma_free_coherent(&phba->pcidev->dev, dma_size,
+			  dmabuf->virt, dmabuf->phys);
+	kfree(dmabuf);
+	return 0;
+}
+
+/**
+ * lpfc_sli4_arm_cqeq_intr - Arm sli-4 device completion and event queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to explicitly arm the SLI4 device's completion and
+ * event queues
+ **/
+static void
+lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
+{
+	uint8_t fcp_eqidx;
+
+	lpfc_sli4_cq_release(phba->sli4_hba.mbx_cq, LPFC_QUEUE_REARM);
+	lpfc_sli4_cq_release(phba->sli4_hba.els_cq, LPFC_QUEUE_REARM);
+	lpfc_sli4_cq_release(phba->sli4_hba.rxq_cq, LPFC_QUEUE_REARM);
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+		lpfc_sli4_cq_release(phba->sli4_hba.fcp_cq[fcp_eqidx],
+				     LPFC_QUEUE_REARM);
+	lpfc_sli4_eq_release(phba->sli4_hba.sp_eq, LPFC_QUEUE_REARM);
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+		lpfc_sli4_eq_release(phba->sli4_hba.fp_eq[fcp_eqidx],
+				     LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_hba_setup - SLI4 device intialization PCI function
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is the main SLI4 device intialization PCI function. This
+ * function is called by the HBA intialization code, HBA reset code and
+ * HBA error attention handler code. Caller is not required to hold any
+ * locks.
+ **/
+int
+lpfc_sli4_hba_setup(struct lpfc_hba *phba)
+{
+	int rc;
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mqe *mqe;
+	uint8_t *vpd;
+	uint32_t vpd_size;
+	uint32_t ftr_rsp = 0;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(phba->pport);
+	struct lpfc_vport *vport = phba->pport;
+	struct lpfc_dmabuf *mp;
+
+	/* Perform a PCI function reset to start from clean */
+	rc = lpfc_pci_function_reset(phba);
+	if (unlikely(rc))
+		return -ENODEV;
+
+	/* Check the HBA Host Status Register for readyness */
+	rc = lpfc_sli4_post_status_check(phba);
+	if (unlikely(rc))
+		return -ENODEV;
+	else {
+		spin_lock_irq(&phba->hbalock);
+		phba->sli.sli_flag |= LPFC_SLI_ACTIVE;
+		spin_unlock_irq(&phba->hbalock);
+	}
+
+	/*
+	 * Allocate a single mailbox container for initializing the
+	 * port.
+	 */
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	/*
+	 * Continue initialization with default values even if driver failed
+	 * to read FCoE param config regions
+	 */
+	if (lpfc_sli4_read_fcoe_params(phba, mboxq))
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT,
+			"2570 Failed to read FCoE parameters \n");
+
+	/* Issue READ_REV to collect vpd and FW information. */
+	vpd_size = PAGE_SIZE;
+	vpd = kzalloc(vpd_size, GFP_KERNEL);
+	if (!vpd) {
+		rc = -ENOMEM;
+		goto out_free_mbox;
+	}
+
+	rc = lpfc_sli4_read_rev(phba, mboxq, vpd, &vpd_size);
+	if (unlikely(rc))
+		goto out_free_vpd;
+
+	mqe = &mboxq->u.mqe;
+	if ((bf_get(lpfc_mbx_rd_rev_sli_lvl,
+		    &mqe->un.read_rev) != LPFC_SLI_REV4) ||
+	    (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev) == 0)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+			"0376 READ_REV Error. SLI Level %d "
+			"FCoE enabled %d\n",
+			bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev),
+			bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev));
+		rc = -EIO;
+		goto out_free_vpd;
+	}
+	/* Single threaded at this point, no need for lock */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag |= HBA_FCOE_SUPPORT;
+	spin_unlock_irq(&phba->hbalock);
+	/*
+	 * Evaluate the read rev and vpd data. Populate the driver
+	 * state with the results. If this routine fails, the failure
+	 * is not fatal as the driver will use generic values.
+	 */
+	rc = lpfc_parse_vpd(phba, vpd, vpd_size);
+	if (unlikely(!rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0377 Error %d parsing vpd. "
+				"Using defaults.\n", rc);
+		rc = 0;
+	}
+
+	/* By now, we should determine the SLI revision, hard code for now */
+	phba->sli_rev = LPFC_SLI_REV4;
+
+	/*
+	 * Discover the port's supported feature set and match it against the
+	 * hosts requests.
+	 */
+	lpfc_request_features(phba, mboxq);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto out_free_vpd;
+	}
+
+	/*
+	 * The port must support FCP initiator mode as this is the
+	 * only mode running in the host.
+	 */
+	if (!(bf_get(lpfc_mbx_rq_ftr_rsp_fcpi, &mqe->un.req_ftrs))) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0378 No support for fcpi mode.\n");
+		ftr_rsp++;
+	}
+
+	/*
+	 * If the port cannot support the host's requested features
+	 * then turn off the global config parameters to disable the
+	 * feature in the driver.  This is not a fatal error.
+	 */
+	if ((phba->cfg_enable_bg) &&
+	    !(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+		ftr_rsp++;
+
+	if (phba->max_vpi && phba->cfg_enable_npiv &&
+	    !(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+		ftr_rsp++;
+
+	if (ftr_rsp) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0379 Feature Mismatch Data: x%08x %08x "
+				"x%x x%x x%x\n", mqe->un.req_ftrs.word2,
+				mqe->un.req_ftrs.word3, phba->cfg_enable_bg,
+				phba->cfg_enable_npiv, phba->max_vpi);
+		if (!(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+			phba->cfg_enable_bg = 0;
+		if (!(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+			phba->cfg_enable_npiv = 0;
+	}
+
+	/* These SLI3 features are assumed in SLI4 */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Read the port's service parameters. */
+	lpfc_read_sparam(phba, mboxq, vport->vpi);
+	mboxq->vport = vport;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	mp = (struct lpfc_dmabuf *) mboxq->context1;
+	if (rc == MBX_SUCCESS) {
+		memcpy(&vport->fc_sparam, mp->virt, sizeof(struct serv_parm));
+		rc = 0;
+	}
+
+	/*
+	 * This memory was allocated by the lpfc_read_sparam routine. Release
+	 * it to the mbuf pool.
+	 */
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+	mboxq->context1 = NULL;
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0382 READ_SPARAM command failed "
+				"status %d, mbxStatus x%x\n",
+				rc, bf_get(lpfc_mqe_status, mqe));
+		phba->link_state = LPFC_HBA_ERROR;
+		rc = -EIO;
+		goto out_free_vpd;
+	}
+
+	if (phba->cfg_soft_wwnn)
+		u64_to_wwn(phba->cfg_soft_wwnn,
+			   vport->fc_sparam.nodeName.u.wwn);
+	if (phba->cfg_soft_wwpn)
+		u64_to_wwn(phba->cfg_soft_wwpn,
+			   vport->fc_sparam.portName.u.wwn);
+	memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
+	       sizeof(struct lpfc_name));
+	memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
+	       sizeof(struct lpfc_name));
+
+	/* Update the fc_host data structures with new wwn. */
+	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
+	/* Register SGL pool to the device using non-embedded mailbox command */
+	rc = lpfc_sli4_post_sgl_list(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0582 Error %d during sgl post operation", rc);
+		rc = -ENODEV;
+		goto out_free_vpd;
+	}
+
+	/* Register SCSI SGL pool to the device */
+	rc = lpfc_sli4_repost_scsi_sgl_list(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0383 Error %d during scsi sgl post opeation",
+				rc);
+		/* Some Scsi buffers were moved to the abort scsi list */
+		/* A pci function reset will repost them */
+		rc = -ENODEV;
+		goto out_free_vpd;
+	}
+
+	/* Post the rpi header region to the device. */
+	rc = lpfc_sli4_post_all_rpi_hdrs(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0393 Error %d during rpi post operation\n",
+				rc);
+		rc = -ENODEV;
+		goto out_free_vpd;
+	}
+	/* Temporary initialization of lpfc_fip_flag to non-fip */
+	bf_set(lpfc_fip_flag, &phba->sli4_hba.sli4_flags, 0);
+
+	/* Set up all the queues to the device */
+	rc = lpfc_sli4_queue_setup(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0381 Error %d during queue setup.\n ", rc);
+		goto out_stop_timers;
+	}
+
+	/* Arm the CQs and then EQs on device */
+	lpfc_sli4_arm_cqeq_intr(phba);
+
+	/* Indicate device interrupt mode */
+	phba->sli4_hba.intr_enable = 1;
+
+	/* Allow asynchronous mailbox command to go through */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Post receive buffers to the device */
+	lpfc_sli4_rb_setup(phba);
+
+	/* Start the ELS watchdog timer */
+	/*
+	 * The driver for SLI4 is not yet ready to process timeouts
+	 * or interrupts.  Once it is, the comment bars can be removed.
+	 */
+	/* mod_timer(&vport->els_tmofunc,
+	 *           jiffies + HZ * (phba->fc_ratov*2)); */
+
+	/* Start heart beat timer */
+	mod_timer(&phba->hb_tmofunc,
+		  jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+	phba->hb_outstanding = 0;
+	phba->last_completion_time = jiffies;
+
+	/* Start error attention (ERATT) polling timer */
+	mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
+
+	/*
+	 * The port is ready, set the host's link state to LINK_DOWN
+	 * in preparation for link interrupts.
+	 */
+	lpfc_init_link(phba, mboxq, phba->cfg_topology, phba->cfg_link_speed);
+	mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	lpfc_set_loopback_flag(phba);
+	/* Change driver state to LPFC_LINK_DOWN right before init link */
+	spin_lock_irq(&phba->hbalock);
+	phba->link_state = LPFC_LINK_DOWN;
+	spin_unlock_irq(&phba->hbalock);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (unlikely(rc != MBX_NOT_FINISHED)) {
+		kfree(vpd);
+		return 0;
+	} else
+		rc = -EIO;
+
+	/* Unset all the queues set up in this routine when error out */
+	if (rc)
+		lpfc_sli4_queue_unset(phba);
+
+out_stop_timers:
+	if (rc)
+		lpfc_stop_hba_timers(phba);
+out_free_vpd:
+	kfree(vpd);
+out_free_mbox:
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return rc;
+}
 
 /**
  * lpfc_mbox_timeout - Timeout call back function for mbox timer
@@ -3244,7 +4608,7 @@
 lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 {
 	LPFC_MBOXQ_t *pmbox = phba->sli.mbox_active;
-	MAILBOX_t *mb = &pmbox->mb;
+	MAILBOX_t *mb = &pmbox->u.mb;
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring *pring;
 
@@ -3281,7 +4645,7 @@
 	spin_unlock_irq(&phba->pport->work_port_lock);
 	spin_lock_irq(&phba->hbalock);
 	phba->link_state = LPFC_LINK_UNKNOWN;
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 
 	pring = &psli->ring[psli->fcp_ring];
@@ -3289,32 +4653,20 @@
 
 	lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
 			"0345 Resetting board due to mailbox timeout\n");
-	/*
-	 * lpfc_offline calls lpfc_sli_hba_down which will clean up
-	 * on oustanding mailbox commands.
-	 */
-	/* If resets are disabled then set error state and return. */
-	if (!phba->cfg_enable_hba_reset) {
-		phba->link_state = LPFC_HBA_ERROR;
-		return;
-	}
-	lpfc_offline_prep(phba);
-	lpfc_offline(phba);
-	lpfc_sli_brdrestart(phba);
-	lpfc_online(phba);
-	lpfc_unblock_mgmt_io(phba);
-	return;
+
+	/* Reset the HBA device */
+	lpfc_reset_hba(phba);
 }
 
 /**
- * lpfc_sli_issue_mbox - Issue a mailbox command to firmware
+ * lpfc_sli_issue_mbox_s3 - Issue an SLI3 mailbox command to firmware
  * @phba: Pointer to HBA context object.
  * @pmbox: Pointer to mailbox object.
  * @flag: Flag indicating how the mailbox need to be processed.
  *
  * This function is called by discovery code and HBA management code
- * to submit a mailbox command to firmware. This function gets the
- * hbalock to protect the data structures.
+ * to submit a mailbox command to firmware with SLI-3 interface spec. This
+ * function gets the hbalock to protect the data structures.
  * The mailbox command can be submitted in polling mode, in which case
  * this function will wait in a polling loop for the completion of the
  * mailbox.
@@ -3332,8 +4684,9 @@
  * return codes the caller owns the mailbox command after the return of
  * the function.
  **/
-int
-lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+static int
+lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
+		       uint32_t flag)
 {
 	MAILBOX_t *mb;
 	struct lpfc_sli *psli = &phba->sli;
@@ -3349,6 +4702,10 @@
 	spin_lock_irqsave(&phba->hbalock, drvr_flag);
 	if (!pmbox) {
 		/* processing mbox queue from intr_handler */
+		if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+			return MBX_SUCCESS;
+		}
 		processing_queue = 1;
 		phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 		pmbox = lpfc_mbox_get(phba);
@@ -3365,7 +4722,7 @@
 			lpfc_printf_log(phba, KERN_ERR,
 					LOG_MBOX | LOG_VPORT,
 					"1806 Mbox x%x failed. No vport\n",
-					pmbox->mb.mbxCommand);
+					pmbox->u.mb.mbxCommand);
 			dump_stack();
 			goto out_not_finished;
 		}
@@ -3385,21 +4742,29 @@
 
 	psli = &phba->sli;
 
-	mb = &pmbox->mb;
+	mb = &pmbox->u.mb;
 	status = MBX_SUCCESS;
 
 	if (phba->link_state == LPFC_HBA_ERROR) {
 		spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
 
 		/* Mbox command <mbxCommand> cannot issue */
-		LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):0311 Mailbox command x%x cannot "
+				"issue Data: x%x x%x\n",
+				pmbox->vport ? pmbox->vport->vpi : 0,
+				pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
 		goto out_not_finished;
 	}
 
 	if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT &&
 	    !(readl(phba->HCregaddr) & HC_MBINT_ENA)) {
 		spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
-		LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2528 Mailbox command x%x cannot "
+				"issue Data: x%x x%x\n",
+				pmbox->vport ? pmbox->vport->vpi : 0,
+				pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
 		goto out_not_finished;
 	}
 
@@ -3413,14 +4778,24 @@
 			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
 
 			/* Mbox command <mbxCommand> cannot issue */
-			LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2529 Mailbox command x%x "
+					"cannot issue Data: x%x x%x\n",
+					pmbox->vport ? pmbox->vport->vpi : 0,
+					pmbox->u.mb.mbxCommand,
+					psli->sli_flag, flag);
 			goto out_not_finished;
 		}
 
-		if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) {
+		if (!(psli->sli_flag & LPFC_SLI_ACTIVE)) {
 			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
 			/* Mbox command <mbxCommand> cannot issue */
-			LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2530 Mailbox command x%x "
+					"cannot issue Data: x%x x%x\n",
+					pmbox->vport ? pmbox->vport->vpi : 0,
+					pmbox->u.mb.mbxCommand,
+					psli->sli_flag, flag);
 			goto out_not_finished;
 		}
 
@@ -3462,12 +4837,17 @@
 
 	/* If we are not polling, we MUST be in SLI2 mode */
 	if (flag != MBX_POLL) {
-		if (!(psli->sli_flag & LPFC_SLI2_ACTIVE) &&
+		if (!(psli->sli_flag & LPFC_SLI_ACTIVE) &&
 		    (mb->mbxCommand != MBX_KILL_BOARD)) {
 			psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
 			/* Mbox command <mbxCommand> cannot issue */
-			LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2531 Mailbox command x%x "
+					"cannot issue Data: x%x x%x\n",
+					pmbox->vport ? pmbox->vport->vpi : 0,
+					pmbox->u.mb.mbxCommand,
+					psli->sli_flag, flag);
 			goto out_not_finished;
 		}
 		/* timeout active mbox command */
@@ -3506,7 +4886,7 @@
 	/* next set own bit for the adapter and copy over command word */
 	mb->mbxOwner = OWN_CHIP;
 
-	if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+	if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 		/* First copy command data to host SLIM area */
 		lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
 	} else {
@@ -3529,7 +4909,7 @@
 
 		if (mb->mbxCommand == MBX_CONFIG_PORT) {
 			/* switch over to host mailbox */
-			psli->sli_flag |= LPFC_SLI2_ACTIVE;
+			psli->sli_flag |= LPFC_SLI_ACTIVE;
 		}
 	}
 
@@ -3552,7 +4932,7 @@
 		writel(CA_MBATT, phba->CAregaddr);
 		readl(phba->CAregaddr); /* flush */
 
-		if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+		if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 			/* First read mbox status word */
 			word0 = *((uint32_t *)phba->mbox);
 			word0 = le32_to_cpu(word0);
@@ -3591,7 +4971,7 @@
 				spin_lock_irqsave(&phba->hbalock, drvr_flag);
 			}
 
-			if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+			if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 				/* First copy command data */
 				word0 = *((uint32_t *)phba->mbox);
 				word0 = le32_to_cpu(word0);
@@ -3604,7 +4984,7 @@
 					if (((slimword0 & OWN_CHIP) != OWN_CHIP)
 					    && slimmb->mbxStatus) {
 						psli->sli_flag &=
-						    ~LPFC_SLI2_ACTIVE;
+						    ~LPFC_SLI_ACTIVE;
 						word0 = slimword0;
 					}
 				}
@@ -3616,7 +4996,7 @@
 			ha_copy = readl(phba->HAregaddr);
 		}
 
-		if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+		if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 			/* copy results back to user */
 			lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE);
 		} else {
@@ -3643,13 +5023,420 @@
 
 out_not_finished:
 	if (processing_queue) {
-		pmbox->mb.mbxStatus = MBX_NOT_FINISHED;
+		pmbox->u.mb.mbxStatus = MBX_NOT_FINISHED;
 		lpfc_mbox_cmpl_put(phba, pmbox);
 	}
 	return MBX_NOT_FINISHED;
 }
 
 /**
+ * lpfc_sli4_post_sync_mbox - Post an SLI4 mailbox to the bootstrap mailbox
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * The function posts a mailbox to the port.  The mailbox is expected
+ * to be comletely filled in and ready for the port to operate on it.
+ * This routine executes a synchronous completion operation on the
+ * mailbox by polling for its completion.
+ *
+ * The caller must not be holding any locks when calling this routine.
+ *
+ * Returns:
+ *	MBX_SUCCESS - mailbox posted successfully
+ *	Any of the MBX error values.
+ **/
+static int
+lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	int rc = MBX_SUCCESS;
+	unsigned long iflag;
+	uint32_t db_ready;
+	uint32_t mcqe_status;
+	uint32_t mbx_cmnd;
+	unsigned long timeout;
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_mqe *mb = &mboxq->u.mqe;
+	struct lpfc_bmbx_create *mbox_rgn;
+	struct dma_address *dma_address;
+	struct lpfc_register bmbx_reg;
+
+	/*
+	 * Only one mailbox can be active to the bootstrap mailbox region
+	 * at a time and there is no queueing provided.
+	 */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2532 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, MBX_POLL);
+		return MBXERR_ERROR;
+	}
+	/* The server grabs the token and owns it until release */
+	psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = mboxq;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+	/*
+	 * Initialize the bootstrap memory region to avoid stale data areas
+	 * in the mailbox post.  Then copy the caller's mailbox contents to
+	 * the bmbx mailbox region.
+	 */
+	mbx_cmnd = bf_get(lpfc_mqe_command, mb);
+	memset(phba->sli4_hba.bmbx.avirt, 0, sizeof(struct lpfc_bmbx_create));
+	lpfc_sli_pcimem_bcopy(mb, phba->sli4_hba.bmbx.avirt,
+			      sizeof(struct lpfc_mqe));
+
+	/* Post the high mailbox dma address to the port and wait for ready. */
+	dma_address = &phba->sli4_hba.bmbx.dma_address;
+	writel(dma_address->addr_hi, phba->sli4_hba.BMBXregaddr);
+
+	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+				   * 1000) + jiffies;
+	do {
+		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+		db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+		if (!db_ready)
+			msleep(2);
+
+		if (time_after(jiffies, timeout)) {
+			rc = MBXERR_ERROR;
+			goto exit;
+		}
+	} while (!db_ready);
+
+	/* Post the low mailbox dma address to the port. */
+	writel(dma_address->addr_lo, phba->sli4_hba.BMBXregaddr);
+	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+				   * 1000) + jiffies;
+	do {
+		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+		db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+		if (!db_ready)
+			msleep(2);
+
+		if (time_after(jiffies, timeout)) {
+			rc = MBXERR_ERROR;
+			goto exit;
+		}
+	} while (!db_ready);
+
+	/*
+	 * Read the CQ to ensure the mailbox has completed.
+	 * If so, update the mailbox status so that the upper layers
+	 * can complete the request normally.
+	 */
+	lpfc_sli_pcimem_bcopy(phba->sli4_hba.bmbx.avirt, mb,
+			      sizeof(struct lpfc_mqe));
+	mbox_rgn = (struct lpfc_bmbx_create *) phba->sli4_hba.bmbx.avirt;
+	lpfc_sli_pcimem_bcopy(&mbox_rgn->mcqe, &mboxq->mcqe,
+			      sizeof(struct lpfc_mcqe));
+	mcqe_status = bf_get(lpfc_mcqe_status, &mbox_rgn->mcqe);
+
+	/* Prefix the mailbox status with range x4000 to note SLI4 status. */
+	if (mcqe_status != MB_CQE_STATUS_SUCCESS) {
+		bf_set(lpfc_mqe_status, mb, LPFC_MBX_ERROR_RANGE | mcqe_status);
+		rc = MBXERR_ERROR;
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0356 Mailbox cmd x%x (x%x) Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x"
+			" x%x x%x CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			mbx_cmnd, lpfc_sli4_mbox_opcode_get(phba, mboxq),
+			bf_get(lpfc_mqe_status, mb),
+			mb->un.mb_words[0], mb->un.mb_words[1],
+			mb->un.mb_words[2], mb->un.mb_words[3],
+			mb->un.mb_words[4], mb->un.mb_words[5],
+			mb->un.mb_words[6], mb->un.mb_words[7],
+			mb->un.mb_words[8], mb->un.mb_words[9],
+			mb->un.mb_words[10], mb->un.mb_words[11],
+			mb->un.mb_words[12], mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+exit:
+	/* We are holding the token, no needed for lock when release */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return rc;
+}
+
+/**
+ * lpfc_sli_issue_mbox_s4 - Issue an SLI4 mailbox command to firmware
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This function is called by discovery code and HBA management code to submit
+ * a mailbox command to firmware with SLI-4 interface spec.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+static int
+lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+		       uint32_t flag)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	unsigned long iflags;
+	int rc;
+
+	/* Detect polling mode and jump to a handler */
+	if (!phba->sli4_hba.intr_enable) {
+		if (flag == MBX_POLL)
+			rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
+		else
+			rc = -EIO;
+		if (rc != MBX_SUCCESS)
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2541 Mailbox command x%x "
+					"(x%x) cannot issue Data: x%x x%x\n",
+					mboxq->vport ? mboxq->vport->vpi : 0,
+					mboxq->u.mb.mbxCommand,
+					lpfc_sli4_mbox_opcode_get(phba, mboxq),
+					psli->sli_flag, flag);
+		return rc;
+	} else if (flag == MBX_POLL) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2542 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		return -EIO;
+	}
+
+	/* Now, interrupt mode asynchrous mailbox command */
+	rc = lpfc_mbox_cmd_check(phba, mboxq);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2543 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		goto out_not_finished;
+	}
+	rc = lpfc_mbox_dev_check(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2544 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		goto out_not_finished;
+	}
+
+	/* Put the mailbox command to the driver internal FIFO */
+	psli->slistat.mbox_busy++;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	lpfc_mbox_put(phba, mboxq);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0354 Mbox cmd issue - Enqueue Data: "
+			"x%x (x%x) x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0xffffff,
+			bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+			lpfc_sli4_mbox_opcode_get(phba, mboxq),
+			phba->pport->port_state,
+			psli->sli_flag, MBX_NOWAIT);
+	/* Wake up worker thread to transport mailbox command from head */
+	lpfc_worker_wake_up(phba);
+
+	return MBX_BUSY;
+
+out_not_finished:
+	return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli4_post_async_mbox - Post an SLI4 mailbox command to device
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called by worker thread to send a mailbox command to
+ * SLI4 HBA firmware.
+ *
+ **/
+int
+lpfc_sli4_post_async_mbox(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *mboxq;
+	int rc = MBX_SUCCESS;
+	unsigned long iflags;
+	struct lpfc_mqe *mqe;
+	uint32_t mbx_cmnd;
+
+	/* Check interrupt mode before post async mailbox command */
+	if (unlikely(!phba->sli4_hba.intr_enable))
+		return MBX_NOT_FINISHED;
+
+	/* Check for mailbox command service token */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_NOT_FINISHED;
+	}
+	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_NOT_FINISHED;
+	}
+	if (unlikely(phba->sli.mbox_active)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0384 There is pending active mailbox cmd\n");
+		return MBX_NOT_FINISHED;
+	}
+	/* Take the mailbox command service token */
+	psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+
+	/* Get the next mailbox command from head of queue */
+	mboxq = lpfc_mbox_get(phba);
+
+	/* If no more mailbox command waiting for post, we're done */
+	if (!mboxq) {
+		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_SUCCESS;
+	}
+	phba->sli.mbox_active = mboxq;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	/* Check device readiness for posting mailbox command */
+	rc = lpfc_mbox_dev_check(phba);
+	if (unlikely(rc))
+		/* Driver clean routine will clean up pending mailbox */
+		goto out_not_finished;
+
+	/* Prepare the mbox command to be posted */
+	mqe = &mboxq->u.mqe;
+	mbx_cmnd = bf_get(lpfc_mqe_command, mqe);
+
+	/* Start timer for the mbox_tmo and log some mailbox post messages */
+	mod_timer(&psli->mbox_tmo, (jiffies +
+		  (HZ * lpfc_mbox_tmo_val(phba, mbx_cmnd))));
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0355 Mailbox cmd x%x (x%x) issue Data: "
+			"x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
+			lpfc_sli4_mbox_opcode_get(phba, mboxq),
+			phba->pport->port_state, psli->sli_flag);
+
+	if (mbx_cmnd != MBX_HEARTBEAT) {
+		if (mboxq->vport) {
+			lpfc_debugfs_disc_trc(mboxq->vport,
+				LPFC_DISC_TRC_MBOX_VPORT,
+				"MBOX Send vport: cmd:x%x mb:x%x x%x",
+				mbx_cmnd, mqe->un.mb_words[0],
+				mqe->un.mb_words[1]);
+		} else {
+			lpfc_debugfs_disc_trc(phba->pport,
+				LPFC_DISC_TRC_MBOX,
+				"MBOX Send: cmd:x%x mb:x%x x%x",
+				mbx_cmnd, mqe->un.mb_words[0],
+				mqe->un.mb_words[1]);
+		}
+	}
+	psli->slistat.mbox_cmd++;
+
+	/* Post the mailbox command to the port */
+	rc = lpfc_sli4_mq_put(phba->sli4_hba.mbx_wq, mqe);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2533 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, MBX_NOWAIT);
+		goto out_not_finished;
+	}
+
+	return rc;
+
+out_not_finished:
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+	__lpfc_mbox_cmpl_put(phba, mboxq);
+	/* Release the token */
+	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli_issue_mbox - Wrapper func for issuing mailbox command
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This routine wraps the actual SLI3 or SLI4 mailbox issuing routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+int
+lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+{
+	return phba->lpfc_sli_issue_mbox(phba, pmbox, flag);
+}
+
+/**
+ * lpfc_mbox_api_table_setup - Set up mbox api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the mbox interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_mbox_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s3;
+		phba->lpfc_sli_handle_slow_ring_event =
+				lpfc_sli_handle_slow_ring_event_s3;
+		phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s3;
+		phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s3;
+		phba->lpfc_sli_brdready = lpfc_sli_brdready_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s4;
+		phba->lpfc_sli_handle_slow_ring_event =
+				lpfc_sli_handle_slow_ring_event_s4;
+		phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s4;
+		phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s4;
+		phba->lpfc_sli_brdready = lpfc_sli_brdready_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1420 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	return 0;
+}
+
+/**
  * __lpfc_sli_ringtx_put - Add an iocb to the txq
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
@@ -3701,35 +5488,34 @@
 }
 
 /**
- * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb
+ * __lpfc_sli_issue_iocb_s3 - SLI3 device lockless ver of lpfc_sli_issue_iocb
  * @phba: Pointer to HBA context object.
- * @pring: Pointer to driver SLI ring object.
+ * @ring_number: SLI ring number to issue iocb on.
  * @piocb: Pointer to command iocb.
  * @flag: Flag indicating if this command can be put into txq.
  *
- * __lpfc_sli_issue_iocb is used by other functions in the driver
- * to issue an iocb command to the HBA. If the PCI slot is recovering
- * from error state or if HBA is resetting or if LPFC_STOP_IOCB_EVENT
- * flag is turned on, the function returns IOCB_ERROR.
- * When the link is down, this function allows only iocbs for
- * posting buffers.
- * This function finds next available slot in the command ring and
- * posts the command to the available slot and writes the port
- * attention register to request HBA start processing new iocb.
- * If there is no slot available in the ring and
- * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the
- * txq, otherwise the function returns IOCB_BUSY.
+ * __lpfc_sli_issue_iocb_s3 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-3 interface spec. If the PCI slot is
+ * recovering from error state, if HBA is resetting or if LPFC_STOP_IOCB_EVENT
+ * flag is turned on, the function returns IOCB_ERROR. When the link is down,
+ * this function allows only iocbs for posting buffers. This function finds
+ * next available slot in the command ring and posts the command to the
+ * available slot and writes the port attention register to request HBA start
+ * processing new iocb. If there is no slot available in the ring and
+ * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the txq, otherwise
+ * the function returns IOCB_BUSY.
  *
- * This function is called with hbalock held.
- * The function will return success after it successfully submit the
- * iocb to firmware or after adding to the txq.
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
  **/
 static int
-__lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+__lpfc_sli_issue_iocb_s3(struct lpfc_hba *phba, uint32_t ring_number,
 		    struct lpfc_iocbq *piocb, uint32_t flag)
 {
 	struct lpfc_iocbq *nextiocb;
 	IOCB_t *iocb;
+	struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
 
 	if (piocb->iocb_cmpl && (!piocb->vport) &&
 	   (piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
@@ -3833,6 +5619,498 @@
 	return IOCB_BUSY;
 }
 
+/**
+ * lpfc_sli4_bpl2sgl - Convert the bpl/bde to a sgl.
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ * @sglq: Pointer to the scatter gather queue object.
+ *
+ * This routine converts the bpl or bde that is in the IOCB
+ * to a sgl list for the sli4 hardware. The physical address
+ * of the bpl/bde is converted back to a virtual address.
+ * If the IOCB contains a BPL then the list of BDE's is
+ * converted to sli4_sge's. If the IOCB contains a single
+ * BDE then it is converted to a single sli_sge.
+ * The IOCB is still in cpu endianess so the contents of
+ * the bpl can be used without byte swapping.
+ *
+ * Returns valid XRI = Success, NO_XRI = Failure.
+**/
+static uint16_t
+lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
+		struct lpfc_sglq *sglq)
+{
+	uint16_t xritag = NO_XRI;
+	struct ulp_bde64 *bpl = NULL;
+	struct ulp_bde64 bde;
+	struct sli4_sge *sgl  = NULL;
+	IOCB_t *icmd;
+	int numBdes = 0;
+	int i = 0;
+
+	if (!piocbq || !sglq)
+		return xritag;
+
+	sgl  = (struct sli4_sge *)sglq->sgl;
+	icmd = &piocbq->iocb;
+	if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+		numBdes = icmd->un.genreq64.bdl.bdeSize /
+				sizeof(struct ulp_bde64);
+		/* The addrHigh and addrLow fields within the IOCB
+		 * have not been byteswapped yet so there is no
+		 * need to swap them back.
+		 */
+		bpl  = (struct ulp_bde64 *)
+			((struct lpfc_dmabuf *)piocbq->context3)->virt;
+
+		if (!bpl)
+			return xritag;
+
+		for (i = 0; i < numBdes; i++) {
+			/* Should already be byte swapped. */
+			sgl->addr_hi =  bpl->addrHigh;
+			sgl->addr_lo =  bpl->addrLow;
+			/* swap the size field back to the cpu so we
+			 * can assign it to the sgl.
+			 */
+			bde.tus.w  = le32_to_cpu(bpl->tus.w);
+			bf_set(lpfc_sli4_sge_len, sgl, bde.tus.f.bdeSize);
+			if ((i+1) == numBdes)
+				bf_set(lpfc_sli4_sge_last, sgl, 1);
+			else
+				bf_set(lpfc_sli4_sge_last, sgl, 0);
+			sgl->word2 = cpu_to_le32(sgl->word2);
+			sgl->word3 = cpu_to_le32(sgl->word3);
+			bpl++;
+			sgl++;
+		}
+	} else if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BDE_64) {
+			/* The addrHigh and addrLow fields of the BDE have not
+			 * been byteswapped yet so they need to be swapped
+			 * before putting them in the sgl.
+			 */
+			sgl->addr_hi =
+				cpu_to_le32(icmd->un.genreq64.bdl.addrHigh);
+			sgl->addr_lo =
+				cpu_to_le32(icmd->un.genreq64.bdl.addrLow);
+			bf_set(lpfc_sli4_sge_len, sgl,
+				icmd->un.genreq64.bdl.bdeSize);
+			bf_set(lpfc_sli4_sge_last, sgl, 1);
+			sgl->word2 = cpu_to_le32(sgl->word2);
+			sgl->word3 = cpu_to_le32(sgl->word3);
+	}
+	return sglq->sli4_xritag;
+}
+
+/**
+ * lpfc_sli4_scmd_to_wqidx_distr - scsi command to SLI4 WQ index distribution
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ *
+ * This routine performs a round robin SCSI command to SLI4 FCP WQ index
+ * distribution.
+ *
+ * Return: index into SLI4 fast-path FCP queue index.
+ **/
+static uint32_t
+lpfc_sli4_scmd_to_wqidx_distr(struct lpfc_hba *phba, struct lpfc_iocbq *piocb)
+{
+	static uint32_t fcp_qidx;
+
+	return fcp_qidx++ % phba->cfg_fcp_wq_count;
+}
+
+/**
+ * lpfc_sli_iocb2wqe - Convert the IOCB to a work queue entry.
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ * @wqe: Pointer to the work queue entry.
+ *
+ * This routine converts the iocb command to its Work Queue Entry
+ * equivalent. The wqe pointer should not have any fields set when
+ * this routine is called because it will memcpy over them.
+ * This routine does not set the CQ_ID or the WQEC bits in the
+ * wqe.
+ *
+ * Returns: 0 = Success, IOCB_ERROR = Failure.
+ **/
+static int
+lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
+		union lpfc_wqe *wqe)
+{
+	uint32_t payload_len = 0;
+	uint8_t ct = 0;
+	uint32_t fip;
+	uint32_t abort_tag;
+	uint8_t command_type = ELS_COMMAND_NON_FIP;
+	uint8_t cmnd;
+	uint16_t xritag;
+	struct ulp_bde64 *bpl = NULL;
+
+	fip = bf_get(lpfc_fip_flag, &phba->sli4_hba.sli4_flags);
+	/* The fcp commands will set command type */
+	if ((!(iocbq->iocb_flag &  LPFC_IO_FCP)) && (!fip))
+		command_type = ELS_COMMAND_NON_FIP;
+	else if (!(iocbq->iocb_flag &  LPFC_IO_FCP))
+		command_type = ELS_COMMAND_FIP;
+	else if (iocbq->iocb_flag &  LPFC_IO_FCP)
+		command_type = FCP_COMMAND;
+	else {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2019 Invalid cmd 0x%x\n",
+			iocbq->iocb.ulpCommand);
+		return IOCB_ERROR;
+	}
+	/* Some of the fields are in the right position already */
+	memcpy(wqe, &iocbq->iocb, sizeof(union lpfc_wqe));
+	abort_tag = (uint32_t) iocbq->iotag;
+	xritag = iocbq->sli4_xritag;
+	wqe->words[7] = 0; /* The ct field has moved so reset */
+	/* words0-2 bpl convert bde */
+	if (iocbq->iocb.un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+		bpl  = (struct ulp_bde64 *)
+			((struct lpfc_dmabuf *)iocbq->context3)->virt;
+		if (!bpl)
+			return IOCB_ERROR;
+
+		/* Should already be byte swapped. */
+		wqe->generic.bde.addrHigh =  le32_to_cpu(bpl->addrHigh);
+		wqe->generic.bde.addrLow =  le32_to_cpu(bpl->addrLow);
+		/* swap the size field back to the cpu so we
+		 * can assign it to the sgl.
+		 */
+		wqe->generic.bde.tus.w  = le32_to_cpu(bpl->tus.w);
+		payload_len = wqe->generic.bde.tus.f.bdeSize;
+	} else
+		payload_len = iocbq->iocb.un.fcpi64.bdl.bdeSize;
+
+	iocbq->iocb.ulpIoTag = iocbq->iotag;
+	cmnd = iocbq->iocb.ulpCommand;
+
+	switch (iocbq->iocb.ulpCommand) {
+	case CMD_ELS_REQUEST64_CR:
+		if (!iocbq->iocb.ulpLe) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2007 Only Limited Edition cmd Format"
+				" supported 0x%x\n",
+				iocbq->iocb.ulpCommand);
+			return IOCB_ERROR;
+		}
+		wqe->els_req.payload_len = payload_len;
+		/* Els_reguest64 has a TMO */
+		bf_set(wqe_tmo, &wqe->els_req.wqe_com,
+			iocbq->iocb.ulpTimeout);
+		/* Need a VF for word 4 set the vf bit*/
+		bf_set(els_req64_vf, &wqe->els_req, 0);
+		/* And a VFID for word 12 */
+		bf_set(els_req64_vfid, &wqe->els_req, 0);
+		/*
+		 * Set ct field to 3, indicates that the context_tag field
+		 * contains the FCFI and remote N_Port_ID is
+		 * in word 5.
+		 */
+
+		ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
+		bf_set(lpfc_wqe_gen_context, &wqe->generic,
+				iocbq->iocb.ulpContext);
+
+		if (iocbq->vport->fc_myDID != 0) {
+			bf_set(els_req64_sid, &wqe->els_req,
+				 iocbq->vport->fc_myDID);
+			bf_set(els_req64_sp, &wqe->els_req, 1);
+		}
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic, ct);
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
+		/* CCP CCPE PV PRI in word10 were set in the memcpy */
+	break;
+	case CMD_XMIT_SEQUENCE64_CR:
+		/* word3 iocb=io_tag32 wqe=payload_offset */
+		/* payload offset used for multilpe outstanding
+		 * sequences on the same exchange
+		 */
+		wqe->words[3] = 0;
+		/* word4 relative_offset memcpy */
+		/* word5 r_ctl/df_ctl memcpy */
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
+		wqe->xmit_sequence.xmit_len = payload_len;
+	break;
+	case CMD_XMIT_BCAST64_CN:
+		/* word3 iocb=iotag32 wqe=payload_len */
+		wqe->words[3] = 0; /* no definition for this in wqe */
+		/* word4 iocb=rsvd wqe=rsvd */
+		/* word5 iocb=rctl/type/df_ctl wqe=rctl/type/df_ctl memcpy */
+		/* word6 iocb=ctxt_tag/io_tag wqe=ctxt_tag/xri */
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+			((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+	break;
+	case CMD_FCP_IWRITE64_CR:
+		command_type = FCP_COMMAND_DATA_OUT;
+		/* The struct for wqe fcp_iwrite has 3 fields that are somewhat
+		 * confusing.
+		 * word3 is payload_len: byte offset to the sgl entry for the
+		 * fcp_command.
+		 * word4 is total xfer len, same as the IOCB->ulpParameter.
+		 * word5 is initial xfer len 0 = wait for xfer-ready
+		 */
+
+		/* Always wait for xfer-ready before sending data */
+		wqe->fcp_iwrite.initial_xfer_len = 0;
+		/* word 4 (xfer length) should have been set on the memcpy */
+
+	/* allow write to fall through to read */
+	case CMD_FCP_IREAD64_CR:
+		/* FCP_CMD is always the 1st sgl entry */
+		wqe->fcp_iread.payload_len =
+			payload_len + sizeof(struct fcp_rsp);
+
+		/* word 4 (xfer length) should have been set on the memcpy */
+
+		bf_set(lpfc_wqe_gen_erp, &wqe->generic,
+			iocbq->iocb.ulpFCP2Rcvy);
+		bf_set(lpfc_wqe_gen_lnk, &wqe->generic, iocbq->iocb.ulpXS);
+		/* The XC bit and the XS bit are similar. The driver never
+		 * tracked whether or not the exchange was previouslly open.
+		 * XC = Exchange create, 0 is create. 1 is already open.
+		 * XS = link cmd: 1 do not close the exchange after command.
+		 * XS = 0 close exchange when command completes.
+		 * The only time we would not set the XC bit is when the XS bit
+		 * is set and we are sending our 2nd or greater command on
+		 * this exchange.
+		 */
+
+	/* ALLOW read & write to fall through to ICMD64 */
+	case CMD_FCP_ICMND64_CR:
+		/* Always open the exchange */
+		bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
+
+		wqe->words[10] &= 0xffff0000; /* zero out ebde count */
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+	break;
+	case CMD_GEN_REQUEST64_CR:
+		/* word3 command length is described as byte offset to the
+		 * rsp_data. Would always be 16, sizeof(struct sli4_sge)
+		 * sgl[0] = cmnd
+		 * sgl[1] = rsp.
+		 *
+		 */
+		wqe->gen_req.command_len = payload_len;
+		/* Word4 parameter  copied in the memcpy */
+		/* Word5 [rctl, type, df_ctl, la] copied in memcpy */
+		/* word6 context tag copied in memcpy */
+		if (iocbq->iocb.ulpCt_h  || iocbq->iocb.ulpCt_l) {
+			ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2015 Invalid CT %x command 0x%x\n",
+				ct, iocbq->iocb.ulpCommand);
+			return IOCB_ERROR;
+		}
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic, 0);
+		bf_set(wqe_tmo, &wqe->gen_req.wqe_com,
+			iocbq->iocb.ulpTimeout);
+
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+		command_type = OTHER_COMMAND;
+	break;
+	case CMD_XMIT_ELS_RSP64_CX:
+		/* words0-2 BDE memcpy */
+		/* word3 iocb=iotag32 wqe=rsvd */
+		wqe->words[3] = 0;
+		/* word4 iocb=did wge=rsvd. */
+		wqe->words[4] = 0;
+		/* word5 iocb=rsvd wge=did */
+		bf_set(wqe_els_did, &wqe->xmit_els_rsp.wqe_dest,
+			 iocbq->iocb.un.elsreq64.remoteID);
+
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+			((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+		bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext);
+		if (!iocbq->iocb.ulpCt_h && iocbq->iocb.ulpCt_l)
+			bf_set(lpfc_wqe_gen_context, &wqe->generic,
+			       iocbq->vport->vpi + phba->vpi_base);
+		command_type = OTHER_COMMAND;
+	break;
+	case CMD_CLOSE_XRI_CN:
+	case CMD_ABORT_XRI_CN:
+	case CMD_ABORT_XRI_CX:
+		/* words 0-2 memcpy should be 0 rserved */
+		/* port will send abts */
+		if (iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+			/*
+			 * The link is down so the fw does not need to send abts
+			 * on the wire.
+			 */
+			bf_set(abort_cmd_ia, &wqe->abort_cmd, 1);
+		else
+			bf_set(abort_cmd_ia, &wqe->abort_cmd, 0);
+		bf_set(abort_cmd_criteria, &wqe->abort_cmd, T_XRI_TAG);
+		abort_tag = iocbq->iocb.un.acxri.abortIoTag;
+		wqe->words[5] = 0;
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+			((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+		abort_tag = iocbq->iocb.un.acxri.abortIoTag;
+		wqe->generic.abort_tag = abort_tag;
+		/*
+		 * The abort handler will send us CMD_ABORT_XRI_CN or
+		 * CMD_CLOSE_XRI_CN and the fw only accepts CMD_ABORT_XRI_CX
+		 */
+		bf_set(lpfc_wqe_gen_command, &wqe->generic, CMD_ABORT_XRI_CX);
+		cmnd = CMD_ABORT_XRI_CX;
+		command_type = OTHER_COMMAND;
+		xritag = 0;
+	break;
+	case CMD_XRI_ABORTED_CX:
+	case CMD_CREATE_XRI_CR: /* Do we expect to use this? */
+		/* words0-2 are all 0's no bde */
+		/* word3 and word4 are rsvrd */
+		wqe->words[3] = 0;
+		wqe->words[4] = 0;
+		/* word5 iocb=rsvd wge=did */
+		/* There is no remote port id in the IOCB? */
+		/* Let this fall through and fail */
+	case CMD_IOCB_FCP_IBIDIR64_CR: /* bidirectional xfer */
+	case CMD_FCP_TSEND64_CX: /* Target mode send xfer-ready */
+	case CMD_FCP_TRSP64_CX: /* Target mode rcv */
+	case CMD_FCP_AUTO_TRSP_CX: /* Auto target rsp */
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2014 Invalid command 0x%x\n",
+				iocbq->iocb.ulpCommand);
+		return IOCB_ERROR;
+	break;
+
+	}
+	bf_set(lpfc_wqe_gen_xri, &wqe->generic, xritag);
+	bf_set(lpfc_wqe_gen_request_tag, &wqe->generic, iocbq->iotag);
+	wqe->generic.abort_tag = abort_tag;
+	bf_set(lpfc_wqe_gen_cmd_type, &wqe->generic, command_type);
+	bf_set(lpfc_wqe_gen_command, &wqe->generic, cmnd);
+	bf_set(lpfc_wqe_gen_class, &wqe->generic, iocbq->iocb.ulpClass);
+	bf_set(lpfc_wqe_gen_cq_id, &wqe->generic, LPFC_WQE_CQ_ID_DEFAULT);
+
+	return 0;
+}
+
+/**
+ * __lpfc_sli_issue_iocb_s4 - SLI4 device lockless ver of lpfc_sli_issue_iocb
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue iocb on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_iocb_s4 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-4 interface spec.
+ *
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
+ **/
+static int
+__lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
+			 struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	struct lpfc_sglq *sglq;
+	uint16_t xritag;
+	union lpfc_wqe wqe;
+	struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
+	uint32_t fcp_wqidx;
+
+	if (piocb->sli4_xritag == NO_XRI) {
+		if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
+			piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+			sglq = NULL;
+		else {
+			sglq = __lpfc_sli_get_sglq(phba);
+			if (!sglq)
+				return IOCB_ERROR;
+			piocb->sli4_xritag = sglq->sli4_xritag;
+		}
+	} else if (piocb->iocb_flag &  LPFC_IO_FCP) {
+		sglq = NULL; /* These IO's already have an XRI and
+			      * a mapped sgl.
+			      */
+	} else {
+		/* This is a continuation of a commandi,(CX) so this
+		 * sglq is on the active list
+		 */
+		sglq = __lpfc_get_active_sglq(phba, piocb->sli4_xritag);
+		if (!sglq)
+			return IOCB_ERROR;
+	}
+
+	if (sglq) {
+		xritag = lpfc_sli4_bpl2sgl(phba, piocb, sglq);
+		if (xritag != sglq->sli4_xritag)
+			return IOCB_ERROR;
+	}
+
+	if (lpfc_sli4_iocb2wqe(phba, piocb, &wqe))
+		return IOCB_ERROR;
+
+	if (piocb->iocb_flag &  LPFC_IO_FCP) {
+		fcp_wqidx = lpfc_sli4_scmd_to_wqidx_distr(phba, piocb);
+		if (lpfc_sli4_wq_put(phba->sli4_hba.fcp_wq[fcp_wqidx], &wqe))
+			return IOCB_ERROR;
+	} else {
+		if (lpfc_sli4_wq_put(phba->sli4_hba.els_wq, &wqe))
+			return IOCB_ERROR;
+	}
+	lpfc_sli_ringtxcmpl_put(phba, pring, piocb);
+
+	return 0;
+}
+
+/**
+ * __lpfc_sli_issue_iocb - Wrapper func of lockless version for issuing iocb
+ *
+ * This routine wraps the actual lockless version for issusing IOCB function
+ * pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * 	IOCB_ERROR - Error
+ * 	IOCB_SUCCESS - Success
+ * 	IOCB_BUSY - Busy
+ **/
+static inline int
+__lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
+		struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	return phba->__lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+}
+
+/**
+ * lpfc_sli_api_table_setup - Set up sli api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SLI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s3;
+		phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s4;
+		phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1419 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	phba->lpfc_get_iocb_from_iocbq = lpfc_get_iocb_from_iocbq;
+	return 0;
+}
 
 /**
  * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
@@ -3848,14 +6126,14 @@
  * functions which do not hold hbalock.
  **/
 int
-lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
 		    struct lpfc_iocbq *piocb, uint32_t flag)
 {
 	unsigned long iflags;
 	int rc;
 
 	spin_lock_irqsave(&phba->hbalock, iflags);
-	rc = __lpfc_sli_issue_iocb(phba, pring, piocb, flag);
+	rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
 
 	return rc;
@@ -4148,6 +6426,52 @@
 }
 
 /**
+ * lpfc_sli_mbox_sys_flush - Flush mailbox command sub-system
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine flushes the mailbox command subsystem. It will unconditionally
+ * flush all the mailbox commands in the three possible stages in the mailbox
+ * command sub-system: pending mailbox command queue; the outstanding mailbox
+ * command; and completed mailbox command queue. It is caller's responsibility
+ * to make sure that the driver is in the proper state to flush the mailbox
+ * command sub-system. Namely, the posting of mailbox commands into the
+ * pending mailbox command queue from the various clients must be stopped;
+ * either the HBA is in a state that it will never works on the outstanding
+ * mailbox command (such as in EEH or ERATT conditions) or the outstanding
+ * mailbox command has been completed.
+ **/
+static void
+lpfc_sli_mbox_sys_flush(struct lpfc_hba *phba)
+{
+	LIST_HEAD(completions);
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *pmb;
+	unsigned long iflag;
+
+	/* Flush all the mailbox commands in the mbox system */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	/* The pending mailbox command queue */
+	list_splice_init(&phba->sli.mboxq, &completions);
+	/* The outstanding active mailbox command */
+	if (psli->mbox_active) {
+		list_add_tail(&psli->mbox_active->list, &completions);
+		psli->mbox_active = NULL;
+		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	}
+	/* The completed mailbox command queue */
+	list_splice_init(&phba->sli.mboxq_cmpl, &completions);
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+	/* Return all flushed mailbox commands with MBX_NOT_FINISHED status */
+	while (!list_empty(&completions)) {
+		list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
+		pmb->u.mb.mbxStatus = MBX_NOT_FINISHED;
+		if (pmb->mbox_cmpl)
+			pmb->mbox_cmpl(phba, pmb);
+	}
+}
+
+/**
  * lpfc_sli_host_down - Vport cleanup function
  * @vport: Pointer to virtual port object.
  *
@@ -4240,9 +6564,11 @@
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring *pring;
 	struct lpfc_dmabuf *buf_ptr;
-	LPFC_MBOXQ_t *pmb;
-	int i;
 	unsigned long flags = 0;
+	int i;
+
+	/* Shutdown the mailbox command sub-system */
+	lpfc_sli_mbox_sys_shutdown(phba);
 
 	lpfc_hba_down_prep(phba);
 
@@ -4287,28 +6613,42 @@
 
 	/* Return any active mbox cmds */
 	del_timer_sync(&psli->mbox_tmo);
-	spin_lock_irqsave(&phba->hbalock, flags);
 
-	spin_lock(&phba->pport->work_port_lock);
+	spin_lock_irqsave(&phba->pport->work_port_lock, flags);
 	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
-	spin_unlock(&phba->pport->work_port_lock);
+	spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
 
-	/* Return any pending or completed mbox cmds */
-	list_splice_init(&phba->sli.mboxq, &completions);
-	if (psli->mbox_active) {
-		list_add_tail(&psli->mbox_active->list, &completions);
-		psli->mbox_active = NULL;
-		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
-	}
-	list_splice_init(&phba->sli.mboxq_cmpl, &completions);
-	spin_unlock_irqrestore(&phba->hbalock, flags);
+	return 1;
+}
 
-	while (!list_empty(&completions)) {
-		list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
-		pmb->mb.mbxStatus = MBX_NOT_FINISHED;
-		if (pmb->mbox_cmpl)
-			pmb->mbox_cmpl(phba,pmb);
-	}
+/**
+ * lpfc_sli4_hba_down - PCI function resource cleanup for the SLI4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function cleans up all queues, iocb, buffers, mailbox commands while
+ * shutting down the SLI4 HBA FCoE function. This function is called with no
+ * lock held and always returns 1.
+ *
+ * This function does the following to cleanup driver FCoE function resources:
+ * - Free discovery resources for each virtual port
+ * - Cleanup any pending fabric iocbs
+ * - Iterate through the iocb txq and free each entry in the list.
+ * - Free up any buffer posted to the HBA.
+ * - Clean up all the queue entries: WQ, RQ, MQ, EQ, CQ, etc.
+ * - Free mailbox commands in the mailbox queue.
+ **/
+int
+lpfc_sli4_hba_down(struct lpfc_hba *phba)
+{
+	/* Stop the SLI4 device port */
+	lpfc_stop_port(phba);
+
+	/* Tear down the queues in the HBA */
+	lpfc_sli4_queue_unset(phba);
+
+	/* unregister default FCFI from the HBA */
+	lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
+
 	return 1;
 }
 
@@ -4639,7 +6979,10 @@
 	iabt = &abtsiocbp->iocb;
 	iabt->un.acxri.abortType = ABORT_TYPE_ABTS;
 	iabt->un.acxri.abortContextTag = icmd->ulpContext;
-	iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		iabt->un.acxri.abortIoTag = cmdiocb->sli4_xritag;
+	else
+		iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
 	iabt->ulpLe = 1;
 	iabt->ulpClass = icmd->ulpClass;
 
@@ -4655,7 +6998,7 @@
 			 "abort cmd iotag x%x\n",
 			 iabt->un.acxri.abortContextTag,
 			 iabt->un.acxri.abortIoTag, abtsiocbp->iotag);
-	retval = __lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0);
+	retval = __lpfc_sli_issue_iocb(phba, pring->ringno, abtsiocbp, 0);
 
 	if (retval)
 		__lpfc_sli_release_iocbq(phba, abtsiocbp);
@@ -4838,7 +7181,10 @@
 		cmd = &iocbq->iocb;
 		abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
 		abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext;
-		abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			abtsiocb->iocb.un.acxri.abortIoTag = iocbq->sli4_xritag;
+		else
+			abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
 		abtsiocb->iocb.ulpLe = 1;
 		abtsiocb->iocb.ulpClass = cmd->ulpClass;
 		abtsiocb->vport = phba->pport;
@@ -4850,7 +7196,8 @@
 
 		/* Setup callback routine and issue the command. */
 		abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
-		ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
+		ret_val = lpfc_sli_issue_iocb(phba, pring->ringno,
+					      abtsiocb, 0);
 		if (ret_val == IOCB_ERROR) {
 			lpfc_sli_release_iocbq(phba, abtsiocb);
 			errcnt++;
@@ -4931,7 +7278,7 @@
  **/
 int
 lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
-			 struct lpfc_sli_ring *pring,
+			 uint32_t ring_number,
 			 struct lpfc_iocbq *piocb,
 			 struct lpfc_iocbq *prspiocbq,
 			 uint32_t timeout)
@@ -4962,7 +7309,7 @@
 		readl(phba->HCregaddr); /* flush */
 	}
 
-	retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0);
+	retval = lpfc_sli_issue_iocb(phba, ring_number, piocb, 0);
 	if (retval == IOCB_SUCCESS) {
 		timeout_req = timeout * HZ;
 		timeleft = wait_event_timeout(done_q,
@@ -5077,53 +7424,156 @@
 }
 
 /**
- * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function
+ * lpfc_sli_mbox_sys_shutdown - shutdown mailbox command sub-system
  * @phba: Pointer to HBA context.
  *
- * This function is called to cleanup any pending mailbox
- * objects in the driver queue before bringing the HBA offline.
- * This function is called while resetting the HBA.
- * The function is called without any lock held. The function
- * takes hbalock to update SLI data structure.
- * This function returns 1 when there is an active mailbox
- * command pending else returns 0.
+ * This function is called to shutdown the driver's mailbox sub-system.
+ * It first marks the mailbox sub-system is in a block state to prevent
+ * the asynchronous mailbox command from issued off the pending mailbox
+ * command queue. If the mailbox command sub-system shutdown is due to
+ * HBA error conditions such as EEH or ERATT, this routine shall invoke
+ * the mailbox sub-system flush routine to forcefully bring down the
+ * mailbox sub-system. Otherwise, if it is due to normal condition (such
+ * as with offline or HBA function reset), this routine will wait for the
+ * outstanding mailbox command to complete before invoking the mailbox
+ * sub-system flush routine to gracefully bring down mailbox sub-system.
  **/
-int
-lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
+void
+lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
 {
-	struct lpfc_vport *vport = phba->pport;
-	int i = 0;
+	struct lpfc_sli *psli = &phba->sli;
+	uint8_t actcmd = MBX_HEARTBEAT;
+	unsigned long timeout;
+
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
+
+	if (psli->sli_flag & LPFC_SLI_ACTIVE) {
+		spin_lock_irq(&phba->hbalock);
+		if (phba->sli.mbox_active)
+			actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
+		spin_unlock_irq(&phba->hbalock);
+		/* Determine how long we might wait for the active mailbox
+		 * command to be gracefully completed by firmware.
+		 */
+		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) *
+					   1000) + jiffies;
+		while (phba->sli.mbox_active) {
+			/* Check active mailbox complete status every 2ms */
+			msleep(2);
+			if (time_after(jiffies, timeout))
+				/* Timeout, let the mailbox flush routine to
+				 * forcefully release active mailbox command
+				 */
+				break;
+		}
+	}
+	lpfc_sli_mbox_sys_flush(phba);
+}
+
+/**
+ * lpfc_sli_eratt_read - read sli-3 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI3 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli_eratt_read(struct lpfc_hba *phba)
+{
 	uint32_t ha_copy;
 
-	while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !vport->stopped) {
-		if (i++ > LPFC_MBOX_TMO * 1000)
-			return 1;
+	/* Read chip Host Attention (HA) register */
+	ha_copy = readl(phba->HAregaddr);
+	if (ha_copy & HA_ERATT) {
+		/* Read host status register to retrieve error event */
+		lpfc_sli_read_hs(phba);
 
-		/*
-		 * Call lpfc_sli_handle_mb_event only if a mailbox cmd
-		 * did finish. This way we won't get the misleading
-		 * "Stray Mailbox Interrupt" message.
-		 */
+		/* Check if there is a deferred error condition is active */
+		if ((HS_FFER1 & phba->work_hs) &&
+		    ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+		     HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+			spin_lock_irq(&phba->hbalock);
+			phba->hba_flag |= DEFER_ERATT;
+			spin_unlock_irq(&phba->hbalock);
+			/* Clear all interrupt enable conditions */
+			writel(0, phba->HCregaddr);
+			readl(phba->HCregaddr);
+		}
+
+		/* Set the driver HA work bitmap */
 		spin_lock_irq(&phba->hbalock);
-		ha_copy = phba->work_ha;
-		phba->work_ha &= ~HA_MBATT;
+		phba->work_ha |= HA_ERATT;
+		/* Indicate polling handles this ERATT */
+		phba->hba_flag |= HBA_ERATT_HANDLED;
 		spin_unlock_irq(&phba->hbalock);
-
-		if (ha_copy & HA_MBATT)
-			if (lpfc_sli_handle_mb_event(phba) == 0)
-				i = 0;
-
-		msleep(1);
+		return 1;
 	}
+	return 0;
+}
 
-	return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0;
+/**
+ * lpfc_sli4_eratt_read - read sli-4 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI4 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli4_eratt_read(struct lpfc_hba *phba)
+{
+	uint32_t uerr_sta_hi, uerr_sta_lo;
+	uint32_t onlnreg0, onlnreg1;
+
+	/* For now, use the SLI4 device internal unrecoverable error
+	 * registers for error attention. This can be changed later.
+	 */
+	onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+	onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+	if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+		uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
+		uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
+		if (uerr_sta_lo || uerr_sta_hi) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1423 HBA Unrecoverable error: "
+					"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+					"online0_reg=0x%x, online1_reg=0x%x\n",
+					uerr_sta_lo, uerr_sta_hi,
+					onlnreg0, onlnreg1);
+			/* TEMP: as the driver error recover logic is not
+			 * fully developed, we just log the error message
+			 * and the device error attention action is now
+			 * temporarily disabled.
+			 */
+			return 0;
+			phba->work_status[0] = uerr_sta_lo;
+			phba->work_status[1] = uerr_sta_hi;
+			spin_lock_irq(&phba->hbalock);
+			/* Set the driver HA work bitmap */
+			phba->work_ha |= HA_ERATT;
+			/* Indicate polling handles this ERATT */
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+			spin_unlock_irq(&phba->hbalock);
+			return 1;
+		}
+	}
+	return 0;
 }
 
 /**
  * lpfc_sli_check_eratt - check error attention events
  * @phba: Pointer to HBA context.
  *
- * This function is called form timer soft interrupt context to check HBA's
+ * This function is called from timer soft interrupt context to check HBA's
  * error attention register bit for error attention events.
  *
  * This fucntion returns 1 when there is Error Attention in the Host Attention
@@ -5134,10 +7584,6 @@
 {
 	uint32_t ha_copy;
 
-	/* If PCI channel is offline, don't process it */
-	if (unlikely(pci_channel_offline(phba->pcidev)))
-		return 0;
-
 	/* If somebody is waiting to handle an eratt, don't process it
 	 * here. The brdkill function will do this.
 	 */
@@ -5161,56 +7607,84 @@
 		return 0;
 	}
 
-	/* Read chip Host Attention (HA) register */
-	ha_copy = readl(phba->HAregaddr);
-	if (ha_copy & HA_ERATT) {
-		/* Read host status register to retrieve error event */
-		lpfc_sli_read_hs(phba);
-
-		/* Check if there is a deferred error condition is active */
-		if ((HS_FFER1 & phba->work_hs) &&
-			((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
-			HS_FFER6 | HS_FFER7) & phba->work_hs)) {
-			phba->hba_flag |= DEFER_ERATT;
-			/* Clear all interrupt enable conditions */
-			writel(0, phba->HCregaddr);
-			readl(phba->HCregaddr);
-		}
-
-		/* Set the driver HA work bitmap */
-		phba->work_ha |= HA_ERATT;
-		/* Indicate polling handles this ERATT */
-		phba->hba_flag |= HBA_ERATT_HANDLED;
+	/* If PCI channel is offline, don't process it */
+	if (unlikely(pci_channel_offline(phba->pcidev))) {
 		spin_unlock_irq(&phba->hbalock);
-		return 1;
+		return 0;
+	}
+
+	switch (phba->sli_rev) {
+	case LPFC_SLI_REV2:
+	case LPFC_SLI_REV3:
+		/* Read chip Host Attention (HA) register */
+		ha_copy = lpfc_sli_eratt_read(phba);
+		break;
+	case LPFC_SLI_REV4:
+		/* Read devcie Uncoverable Error (UERR) registers */
+		ha_copy = lpfc_sli4_eratt_read(phba);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0299 Invalid SLI revision (%d)\n",
+				phba->sli_rev);
+		ha_copy = 0;
+		break;
 	}
 	spin_unlock_irq(&phba->hbalock);
+
+	return ha_copy;
+}
+
+/**
+ * lpfc_intr_state_check - Check device state for interrupt handling
+ * @phba: Pointer to HBA context.
+ *
+ * This inline routine checks whether a device or its PCI slot is in a state
+ * that the interrupt should be handled.
+ *
+ * This function returns 0 if the device or the PCI slot is in a state that
+ * interrupt should be handled, otherwise -EIO.
+ */
+static inline int
+lpfc_intr_state_check(struct lpfc_hba *phba)
+{
+	/* If the pci channel is offline, ignore all the interrupts */
+	if (unlikely(pci_channel_offline(phba->pcidev)))
+		return -EIO;
+
+	/* Update device level interrupt statistics */
+	phba->sli.slistat.sli_intr++;
+
+	/* Ignore all interrupts during initialization. */
+	if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+		return -EIO;
+
 	return 0;
 }
 
 /**
- * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver
+ * lpfc_sli_sp_intr_handler - Slow-path interrupt handler to SLI-3 device
  * @irq: Interrupt number.
  * @dev_id: The device context pointer.
  *
  * This function is directly called from the PCI layer as an interrupt
- * service routine when the device is enabled with MSI-X multi-message
- * interrupt mode and there are slow-path events in the HBA. However,
- * when the device is enabled with either MSI or Pin-IRQ interrupt mode,
- * this function is called as part of the device-level interrupt handler.
- * When the PCI slot is in error recovery or the HBA is undergoing
- * initialization, the interrupt handler will not process the interrupt.
- * The link attention and ELS ring attention events are handled by the
- * worker thread. The interrupt handler signals the worker thread and
- * and returns for these events. This function is called without any
- * lock held. It gets the hbalock to access and update SLI data
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there are slow-path events in
+ * the HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA
+ * is undergoing initialization, the interrupt handler will not process
+ * the interrupt. The link attention and ELS ring attention events are
+ * handled by the worker thread. The interrupt handler signals the worker
+ * thread and returns for these events. This function is called without
+ * any lock held. It gets the hbalock to access and update SLI data
  * structures.
  *
  * This function returns IRQ_HANDLED when interrupt is handled else it
  * returns IRQ_NONE.
  **/
 irqreturn_t
-lpfc_sp_intr_handler(int irq, void *dev_id)
+lpfc_sli_sp_intr_handler(int irq, void *dev_id)
 {
 	struct lpfc_hba  *phba;
 	uint32_t ha_copy;
@@ -5240,13 +7714,8 @@
 	 * individual interrupt handler in MSI-X multi-message interrupt mode
 	 */
 	if (phba->intr_type == MSIX) {
-		/* If the pci channel is offline, ignore all the interrupts */
-		if (unlikely(pci_channel_offline(phba->pcidev)))
-			return IRQ_NONE;
-		/* Update device-level interrupt statistics */
-		phba->sli.slistat.sli_intr++;
-		/* Ignore all interrupts during initialization. */
-		if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+		/* Check device state for handling interrupt */
+		if (lpfc_intr_state_check(phba))
 			return IRQ_NONE;
 		/* Need to read HA REG for slow-path events */
 		spin_lock_irqsave(&phba->hbalock, iflag);
@@ -5271,7 +7740,7 @@
 		 * interrupt.
 		 */
 		if (unlikely(phba->hba_flag & DEFER_ERATT)) {
-			spin_unlock_irq(&phba->hbalock);
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
 			return IRQ_NONE;
 		}
 
@@ -5364,7 +7833,7 @@
 
 		if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
 			pmb = phba->sli.mbox_active;
-			pmbox = &pmb->mb;
+			pmbox = &pmb->u.mb;
 			mbox = phba->mbox;
 			vport = pmb->vport;
 
@@ -5434,7 +7903,8 @@
 							LOG_MBOX | LOG_SLI,
 							"0350 rc should have"
 							"been MBX_BUSY");
-						goto send_current_mbox;
+						if (rc != MBX_NOT_FINISHED)
+							goto send_current_mbox;
 					}
 				}
 				spin_lock_irqsave(
@@ -5471,29 +7941,29 @@
 	}
 	return IRQ_HANDLED;
 
-} /* lpfc_sp_intr_handler */
+} /* lpfc_sli_sp_intr_handler */
 
 /**
- * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver
+ * lpfc_sli_fp_intr_handler - Fast-path interrupt handler to SLI-3 device.
  * @irq: Interrupt number.
  * @dev_id: The device context pointer.
  *
  * This function is directly called from the PCI layer as an interrupt
- * service routine when the device is enabled with MSI-X multi-message
- * interrupt mode and there is a fast-path FCP IOCB ring event in the
- * HBA. However, when the device is enabled with either MSI or Pin-IRQ
- * interrupt mode, this function is called as part of the device-level
- * interrupt handler. When the PCI slot is in error recovery or the HBA
- * is undergoing initialization, the interrupt handler will not process
- * the interrupt. The SCSI FCP fast-path ring event are handled in the
- * intrrupt context. This function is called without any lock held. It
- * gets the hbalock to access and update SLI data structures.
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures.
  *
  * This function returns IRQ_HANDLED when interrupt is handled else it
  * returns IRQ_NONE.
  **/
 irqreturn_t
-lpfc_fp_intr_handler(int irq, void *dev_id)
+lpfc_sli_fp_intr_handler(int irq, void *dev_id)
 {
 	struct lpfc_hba  *phba;
 	uint32_t ha_copy;
@@ -5513,13 +7983,8 @@
 	 * individual interrupt handler in MSI-X multi-message interrupt mode
 	 */
 	if (phba->intr_type == MSIX) {
-		/* If pci channel is offline, ignore all the interrupts */
-		if (unlikely(pci_channel_offline(phba->pcidev)))
-			return IRQ_NONE;
-		/* Update device-level interrupt statistics */
-		phba->sli.slistat.sli_intr++;
-		/* Ignore all interrupts during initialization. */
-		if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+		/* Check device state for handling interrupt */
+		if (lpfc_intr_state_check(phba))
 			return IRQ_NONE;
 		/* Need to read HA REG for FCP ring and other ring events */
 		ha_copy = readl(phba->HAregaddr);
@@ -5530,7 +7995,7 @@
 		 * any interrupt.
 		 */
 		if (unlikely(phba->hba_flag & DEFER_ERATT)) {
-			spin_unlock_irq(&phba->hbalock);
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
 			return IRQ_NONE;
 		}
 		writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
@@ -5566,26 +8031,27 @@
 		}
 	}
 	return IRQ_HANDLED;
-}  /* lpfc_fp_intr_handler */
+}  /* lpfc_sli_fp_intr_handler */
 
 /**
- * lpfc_intr_handler - The device-level interrupt handler of lpfc driver
+ * lpfc_sli_intr_handler - Device-level interrupt handler to SLI-3 device
  * @irq: Interrupt number.
  * @dev_id: The device context pointer.
  *
- * This function is the device-level interrupt handler called from the PCI
- * layer when either MSI or Pin-IRQ interrupt mode is enabled and there is
- * an event in the HBA which requires driver attention. This function
- * invokes the slow-path interrupt attention handling function and fast-path
- * interrupt attention handling function in turn to process the relevant
- * HBA attention events. This function is called without any lock held. It
- * gets the hbalock to access and update SLI data structures.
+ * This function is the HBA device-level interrupt handler to device with
+ * SLI-3 interface spec, called from the PCI layer when either MSI or
+ * Pin-IRQ interrupt mode is enabled and there is an event in the HBA which
+ * requires driver attention. This function invokes the slow-path interrupt
+ * attention handling function and fast-path interrupt attention handling
+ * function in turn to process the relevant HBA attention events. This
+ * function is called without any lock held. It gets the hbalock to access
+ * and update SLI data structures.
  *
  * This function returns IRQ_HANDLED when interrupt is handled, else it
  * returns IRQ_NONE.
  **/
 irqreturn_t
-lpfc_intr_handler(int irq, void *dev_id)
+lpfc_sli_intr_handler(int irq, void *dev_id)
 {
 	struct lpfc_hba  *phba;
 	irqreturn_t sp_irq_rc, fp_irq_rc;
@@ -5600,15 +8066,8 @@
 	if (unlikely(!phba))
 		return IRQ_NONE;
 
-	/* If the pci channel is offline, ignore all the interrupts. */
-	if (unlikely(pci_channel_offline(phba->pcidev)))
-		return IRQ_NONE;
-
-	/* Update device level interrupt statistics */
-	phba->sli.slistat.sli_intr++;
-
-	/* Ignore all interrupts during initialization. */
-	if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+	/* Check device state for handling interrupt */
+	if (lpfc_intr_state_check(phba))
 		return IRQ_NONE;
 
 	spin_lock(&phba->hbalock);
@@ -5650,7 +8109,7 @@
 	status2 >>= (4*LPFC_ELS_RING);
 
 	if (status1 || (status2 & HA_RXMASK))
-		sp_irq_rc = lpfc_sp_intr_handler(irq, dev_id);
+		sp_irq_rc = lpfc_sli_sp_intr_handler(irq, dev_id);
 	else
 		sp_irq_rc = IRQ_NONE;
 
@@ -5670,10 +8129,3322 @@
 		status2 = 0;
 
 	if ((status1 & HA_RXMASK) || (status2 & HA_RXMASK))
-		fp_irq_rc = lpfc_fp_intr_handler(irq, dev_id);
+		fp_irq_rc = lpfc_sli_fp_intr_handler(irq, dev_id);
 	else
 		fp_irq_rc = IRQ_NONE;
 
 	/* Return device-level interrupt handling status */
 	return (sp_irq_rc == IRQ_HANDLED) ? sp_irq_rc : fp_irq_rc;
-}  /* lpfc_intr_handler */
+}  /* lpfc_sli_intr_handler */
+
+/**
+ * lpfc_sli4_fcp_xri_abort_event_proc - Process fcp xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 FCP abort XRI events.
+ **/
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+
+	/* First, declare the fcp xri abort event has been handled */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~FCP_XRI_ABORT_EVENT;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, handle all the fcp xri abort events */
+	while (!list_empty(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue)) {
+		/* Get the first event from the head of the event queue */
+		spin_lock_irq(&phba->hbalock);
+		list_remove_head(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irq(&phba->hbalock);
+		/* Notify aborted XRI for FCP work queue */
+		lpfc_sli4_fcp_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+		/* Free the event processed back to the free pool */
+		lpfc_sli4_cq_event_release(phba, cq_event);
+	}
+}
+
+/**
+ * lpfc_sli4_els_xri_abort_event_proc - Process els xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 els abort xri events.
+ **/
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+
+	/* First, declare the els xri abort event has been handled */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~ELS_XRI_ABORT_EVENT;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, handle all the els xri abort events */
+	while (!list_empty(&phba->sli4_hba.sp_els_xri_aborted_work_queue)) {
+		/* Get the first event from the head of the event queue */
+		spin_lock_irq(&phba->hbalock);
+		list_remove_head(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irq(&phba->hbalock);
+		/* Notify aborted XRI for ELS work queue */
+		lpfc_sli4_els_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+		/* Free the event processed back to the free pool */
+		lpfc_sli4_cq_event_release(phba, cq_event);
+	}
+}
+
+static void
+lpfc_sli4_iocb_param_transfer(struct lpfc_iocbq *pIocbIn,
+			      struct lpfc_iocbq *pIocbOut,
+			      struct lpfc_wcqe_complete *wcqe)
+{
+	size_t offset = offsetof(struct lpfc_iocbq, iocb);
+
+	memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset,
+	       sizeof(struct lpfc_iocbq) - offset);
+	memset(&pIocbIn->sli4_info, 0,
+	       sizeof(struct lpfc_sli4_rspiocb_info));
+	/* Map WCQE parameters into irspiocb parameters */
+	pIocbIn->iocb.ulpStatus = bf_get(lpfc_wcqe_c_status, wcqe);
+	if (pIocbOut->iocb_flag & LPFC_IO_FCP)
+		if (pIocbIn->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
+			pIocbIn->iocb.un.fcpi.fcpi_parm =
+					pIocbOut->iocb.un.fcpi.fcpi_parm -
+					wcqe->total_data_placed;
+		else
+			pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+	else
+		pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+	/* Load in additional WCQE parameters */
+	pIocbIn->sli4_info.hw_status = bf_get(lpfc_wcqe_c_hw_status, wcqe);
+	pIocbIn->sli4_info.bfield = 0;
+	if (bf_get(lpfc_wcqe_c_xb, wcqe))
+		pIocbIn->sli4_info.bfield |= LPFC_XB;
+	if (bf_get(lpfc_wcqe_c_pv, wcqe)) {
+		pIocbIn->sli4_info.bfield |= LPFC_PV;
+		pIocbIn->sli4_info.priority =
+					bf_get(lpfc_wcqe_c_priority, wcqe);
+	}
+}
+
+/**
+ * lpfc_sli4_sp_handle_async_event - Handle an asynchroous event
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with asynchrous
+ * event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_async_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0392 Async Event: word0:x%x, word1:x%x, "
+			"word2:x%x, word3:x%x\n", mcqe->word0,
+			mcqe->mcqe_tag0, mcqe->mcqe_tag1, mcqe->trailer);
+
+	/* Allocate a new internal CQ_EVENT entry */
+	cq_event = lpfc_sli4_cq_event_alloc(phba);
+	if (!cq_event) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0394 Failed to allocate CQ_EVENT entry\n");
+		return false;
+	}
+
+	/* Move the CQE into an asynchronous event entry */
+	memcpy(&cq_event->cqe, mcqe, sizeof(struct lpfc_mcqe));
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	list_add_tail(&cq_event->list, &phba->sli4_hba.sp_asynce_work_queue);
+	/* Set the async event flag */
+	phba->hba_flag |= ASYNC_EVENT;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return true;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mbox_event - Handle a mailbox completion event
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with mailbox
+ * completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mbox_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+	uint32_t mcqe_status;
+	MAILBOX_t *mbox, *pmbox;
+	struct lpfc_mqe *mqe;
+	struct lpfc_vport *vport;
+	struct lpfc_nodelist *ndlp;
+	struct lpfc_dmabuf *mp;
+	unsigned long iflags;
+	LPFC_MBOXQ_t *pmb;
+	bool workposted = false;
+	int rc;
+
+	/* If not a mailbox complete MCQE, out by checking mailbox consume */
+	if (!bf_get(lpfc_trailer_completed, mcqe))
+		goto out_no_mqe_complete;
+
+	/* Get the reference to the active mbox command */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	pmb = phba->sli.mbox_active;
+	if (unlikely(!pmb)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"1832 No pending MBOX command to handle\n");
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		goto out_no_mqe_complete;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	mqe = &pmb->u.mqe;
+	pmbox = (MAILBOX_t *)&pmb->u.mqe;
+	mbox = phba->mbox;
+	vport = pmb->vport;
+
+	/* Reset heartbeat timer */
+	phba->last_completion_time = jiffies;
+	del_timer(&phba->sli.mbox_tmo);
+
+	/* Move mbox data to caller's mailbox region, do endian swapping */
+	if (pmb->mbox_cmpl && mbox)
+		lpfc_sli_pcimem_bcopy(mbox, mqe, sizeof(struct lpfc_mqe));
+	/* Set the mailbox status with SLI4 range 0x4000 */
+	mcqe_status = bf_get(lpfc_mcqe_status, mcqe);
+	if (mcqe_status != MB_CQE_STATUS_SUCCESS)
+		bf_set(lpfc_mqe_status, mqe,
+		       (LPFC_MBX_ERROR_RANGE | mcqe_status));
+
+	if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) {
+		pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG;
+		lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_MBOX_VPORT,
+				      "MBOX dflt rpi: status:x%x rpi:x%x",
+				      mcqe_status,
+				      pmbox->un.varWords[0], 0);
+		if (mcqe_status == MB_CQE_STATUS_SUCCESS) {
+			mp = (struct lpfc_dmabuf *)(pmb->context1);
+			ndlp = (struct lpfc_nodelist *)pmb->context2;
+			/* Reg_LOGIN of dflt RPI was successful. Now lets get
+			 * RID of the PPI using the same mbox buffer.
+			 */
+			lpfc_unreg_login(phba, vport->vpi,
+					 pmbox->un.varWords[0], pmb);
+			pmb->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi;
+			pmb->context1 = mp;
+			pmb->context2 = ndlp;
+			pmb->vport = vport;
+			rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+			if (rc != MBX_BUSY)
+				lpfc_printf_log(phba, KERN_ERR, LOG_MBOX |
+						LOG_SLI, "0385 rc should "
+						"have been MBX_BUSY\n");
+			if (rc != MBX_NOT_FINISHED)
+				goto send_current_mbox;
+		}
+	}
+	spin_lock_irqsave(&phba->pport->work_port_lock, iflags);
+	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
+	spin_unlock_irqrestore(&phba->pport->work_port_lock, iflags);
+
+	/* There is mailbox completion work to do */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	__lpfc_mbox_cmpl_put(phba, pmb);
+	phba->work_ha |= HA_MBATT;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	workposted = true;
+
+send_current_mbox:
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	/* Release the mailbox command posting token */
+	phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	/* Setting active mailbox pointer need to be in sync to flag clear */
+	phba->sli.mbox_active = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	/* Wake up worker thread to post the next pending mailbox command */
+	lpfc_worker_wake_up(phba);
+out_no_mqe_complete:
+	if (bf_get(lpfc_trailer_consumed, mcqe))
+		lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mcqe - Process a mailbox completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry, it invokes the
+ * proper mailbox complete handling or asynchrous event handling routine
+ * according to the MCQE's async bit.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+{
+	struct lpfc_mcqe mcqe;
+	bool workposted;
+
+	/* Copy the mailbox MCQE and convert endian order as needed */
+	lpfc_sli_pcimem_bcopy(cqe, &mcqe, sizeof(struct lpfc_mcqe));
+
+	/* Invoke the proper event handling routine */
+	if (!bf_get(lpfc_trailer_async, &mcqe))
+		workposted = lpfc_sli4_sp_handle_mbox_event(phba, &mcqe);
+	else
+		workposted = lpfc_sli4_sp_handle_async_event(phba, &mcqe);
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_els_wcqe - Handle els work-queue completion event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an ELS work-queue completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_els_wcqe(struct lpfc_hba *phba,
+			     struct lpfc_wcqe_complete *wcqe)
+{
+	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
+	struct lpfc_iocbq *cmdiocbq;
+	struct lpfc_iocbq *irspiocbq;
+	unsigned long iflags;
+	bool workposted = false;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	pring->stats.iocb_event++;
+	/* Look up the ELS command IOCB and create pseudo response IOCB */
+	cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	if (unlikely(!cmdiocbq)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0386 ELS complete with no corresponding "
+				"cmdiocb: iotag (%d)\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+		return workposted;
+	}
+
+	/* Fake the irspiocbq and copy necessary response information */
+	irspiocbq = lpfc_sli_get_iocbq(phba);
+	if (!irspiocbq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0387 Failed to allocate an iocbq\n");
+		return workposted;
+	}
+	lpfc_sli4_iocb_param_transfer(irspiocbq, cmdiocbq, wcqe);
+
+	/* Add the irspiocb to the response IOCB work list */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	list_add_tail(&irspiocbq->list, &phba->sli4_hba.sp_rspiocb_work_queue);
+	/* Indicate ELS ring attention */
+	phba->work_ha |= (HA_R0ATT << (4*LPFC_ELS_RING));
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	workposted = true;
+
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rel_wcqe - Handle slow-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles slow-path WQ entry comsumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_sp_handle_rel_wcqe(struct lpfc_hba *phba,
+			     struct lpfc_wcqe_release *wcqe)
+{
+	/* Check for the slow-path ELS work queue */
+	if (bf_get(lpfc_wcqe_r_wq_id, wcqe) == phba->sli4_hba.els_wq->queue_id)
+		lpfc_sli4_wq_release(phba->sli4_hba.els_wq,
+				     bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+	else
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"2579 Slow-path wqe consume event carries "
+				"miss-matched qid: wcqe-qid=x%x, sp-qid=x%x\n",
+				bf_get(lpfc_wcqe_r_wqe_index, wcqe),
+				phba->sli4_hba.els_wq->queue_id);
+}
+
+/**
+ * lpfc_sli4_sp_handle_abort_xri_wcqe - Handle a xri abort event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to a WQ completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an XRI abort event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_abort_xri_wcqe(struct lpfc_hba *phba,
+				   struct lpfc_queue *cq,
+				   struct sli4_wcqe_xri_aborted *wcqe)
+{
+	bool workposted = false;
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	/* Allocate a new internal CQ_EVENT entry */
+	cq_event = lpfc_sli4_cq_event_alloc(phba);
+	if (!cq_event) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0602 Failed to allocate CQ_EVENT entry\n");
+		return false;
+	}
+
+	/* Move the CQE into the proper xri abort event list */
+	memcpy(&cq_event->cqe, wcqe, sizeof(struct sli4_wcqe_xri_aborted));
+	switch (cq->subtype) {
+	case LPFC_FCP:
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		list_add_tail(&cq_event->list,
+			      &phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+		/* Set the fcp xri abort event flag */
+		phba->hba_flag |= FCP_XRI_ABORT_EVENT;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	case LPFC_ELS:
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		list_add_tail(&cq_event->list,
+			      &phba->sli4_hba.sp_els_xri_aborted_work_queue);
+		/* Set the els xri abort event flag */
+		phba->hba_flag |= ELS_XRI_ABORT_EVENT;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0603 Invalid work queue CQE subtype (x%x)\n",
+				cq->subtype);
+		workposted = false;
+		break;
+	}
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_wcqe - Process a work-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to the completion queue.
+ * @wcqe: Pointer to a completion queue entry.
+ *
+ * This routine process a slow-path work-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			 struct lpfc_cqe *cqe)
+{
+	struct lpfc_wcqe_complete wcqe;
+	bool workposted = false;
+
+	/* Copy the work queue CQE and convert endian order if needed */
+	lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+	/* Check and process for different type of WCQE and dispatch */
+	switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+	case CQE_CODE_COMPL_WQE:
+		/* Process the WQ complete event */
+		workposted = lpfc_sli4_sp_handle_els_wcqe(phba,
+					(struct lpfc_wcqe_complete *)&wcqe);
+		break;
+	case CQE_CODE_RELEASE_WQE:
+		/* Process the WQ release event */
+		lpfc_sli4_sp_handle_rel_wcqe(phba,
+					(struct lpfc_wcqe_release *)&wcqe);
+		break;
+	case CQE_CODE_XRI_ABORTED:
+		/* Process the WQ XRI abort event */
+		workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+					(struct sli4_wcqe_xri_aborted *)&wcqe);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0388 Not a valid WCQE code: x%x\n",
+				bf_get(lpfc_wcqe_c_code, &wcqe));
+		break;
+	}
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rcqe - Process a receive-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @rcqe: Pointer to receive-queue completion queue entry.
+ *
+ * This routine process a receive-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_rcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+{
+	struct lpfc_rcqe rcqe;
+	bool workposted = false;
+	struct lpfc_queue *hrq = phba->sli4_hba.hdr_rq;
+	struct lpfc_queue *drq = phba->sli4_hba.dat_rq;
+	struct hbq_dmabuf *dma_buf;
+	uint32_t status;
+	unsigned long iflags;
+
+	/* Copy the receive queue CQE and convert endian order if needed */
+	lpfc_sli_pcimem_bcopy(cqe, &rcqe, sizeof(struct lpfc_rcqe));
+	lpfc_sli4_rq_release(hrq, drq);
+	if (bf_get(lpfc_rcqe_code, &rcqe) != CQE_CODE_RECEIVE)
+		goto out;
+	if (bf_get(lpfc_rcqe_rq_id, &rcqe) != hrq->queue_id)
+		goto out;
+
+	status = bf_get(lpfc_rcqe_status, &rcqe);
+	switch (status) {
+	case FC_STATUS_RQ_BUF_LEN_EXCEEDED:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2537 Receive Frame Truncated!!\n");
+	case FC_STATUS_RQ_SUCCESS:
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		dma_buf = lpfc_sli_hbqbuf_get(&phba->hbqs[0].hbq_buffer_list);
+		if (!dma_buf) {
+			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			goto out;
+		}
+		memcpy(&dma_buf->rcqe, &rcqe, sizeof(rcqe));
+		/* save off the frame for the word thread to process */
+		list_add_tail(&dma_buf->dbuf.list, &phba->rb_pend_list);
+		/* Frame received */
+		phba->hba_flag |= HBA_RECEIVE_BUFFER;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	case FC_STATUS_INSUFF_BUF_NEED_BUF:
+	case FC_STATUS_INSUFF_BUF_FRM_DISC:
+		/* Post more buffers if possible */
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		phba->hba_flag |= HBA_POST_RECEIVE_BUFFER;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	}
+out:
+	return workposted;
+
+}
+
+/**
+ * lpfc_sli4_sp_handle_eqe - Process a slow-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the slow-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on that completion queue, rearm the
+ * completion queue, and then return.
+ *
+ **/
+static void
+lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe)
+{
+	struct lpfc_queue *cq = NULL, *childq, *speq;
+	struct lpfc_cqe *cqe;
+	bool workposted = false;
+	int ecount = 0;
+	uint16_t cqid;
+
+	if (bf_get(lpfc_eqe_major_code, eqe) != 0 ||
+	    bf_get(lpfc_eqe_minor_code, eqe) != 0) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0359 Not a valid slow-path completion "
+				"event: majorcode=x%x, minorcode=x%x\n",
+				bf_get(lpfc_eqe_major_code, eqe),
+				bf_get(lpfc_eqe_minor_code, eqe));
+		return;
+	}
+
+	/* Get the reference to the corresponding CQ */
+	cqid = bf_get(lpfc_eqe_resource_id, eqe);
+
+	/* Search for completion queue pointer matching this cqid */
+	speq = phba->sli4_hba.sp_eq;
+	list_for_each_entry(childq, &speq->child_list, list) {
+		if (childq->queue_id == cqid) {
+			cq = childq;
+			break;
+		}
+	}
+	if (unlikely(!cq)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0365 Slow-path CQ identifier (%d) does "
+				"not exist\n", cqid);
+		return;
+	}
+
+	/* Process all the entries to the CQ */
+	switch (cq->type) {
+	case LPFC_MCQ:
+		while ((cqe = lpfc_sli4_cq_get(cq))) {
+			workposted |= lpfc_sli4_sp_handle_mcqe(phba, cqe);
+			if (!(++ecount % LPFC_GET_QE_REL_INT))
+				lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+		}
+		break;
+	case LPFC_WCQ:
+		while ((cqe = lpfc_sli4_cq_get(cq))) {
+			workposted |= lpfc_sli4_sp_handle_wcqe(phba, cq, cqe);
+			if (!(++ecount % LPFC_GET_QE_REL_INT))
+				lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+		}
+		break;
+	case LPFC_RCQ:
+		while ((cqe = lpfc_sli4_cq_get(cq))) {
+			workposted |= lpfc_sli4_sp_handle_rcqe(phba, cqe);
+			if (!(++ecount % LPFC_GET_QE_REL_INT))
+				lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+		}
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0370 Invalid completion queue type (%d)\n",
+				cq->type);
+		return;
+	}
+
+	/* Catch the no cq entry condition, log an error */
+	if (unlikely(ecount == 0))
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0371 No entry from the CQ: identifier "
+				"(x%x), type (%d)\n", cq->queue_id, cq->type);
+
+	/* In any case, flash and re-arm the RCQ */
+	lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+
+	/* wake up worker thread if there are works to be done */
+	if (workposted)
+		lpfc_worker_wake_up(phba);
+}
+
+/**
+ * lpfc_sli4_fp_handle_fcp_wcqe - Process fast-path work queue completion entry
+ * @eqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static void
+lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc_hba *phba,
+			     struct lpfc_wcqe_complete *wcqe)
+{
+	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_FCP_RING];
+	struct lpfc_iocbq *cmdiocbq;
+	struct lpfc_iocbq irspiocbq;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	pring->stats.iocb_event++;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	/* Check for response status */
+	if (unlikely(bf_get(lpfc_wcqe_c_status, wcqe))) {
+		/* If resource errors reported from HBA, reduce queue
+		 * depth of the SCSI device.
+		 */
+		if ((bf_get(lpfc_wcqe_c_status, wcqe) ==
+		     IOSTAT_LOCAL_REJECT) &&
+		    (wcqe->parameter == IOERR_NO_RESOURCES)) {
+			phba->lpfc_rampdown_queue_depth(phba);
+		}
+		/* Log the error status */
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0373 FCP complete error: status=x%x, "
+				"hw_status=x%x, total_data_specified=%d, "
+				"parameter=x%x, word3=x%x\n",
+				bf_get(lpfc_wcqe_c_status, wcqe),
+				bf_get(lpfc_wcqe_c_hw_status, wcqe),
+				wcqe->total_data_placed, wcqe->parameter,
+				wcqe->word3);
+	}
+
+	/* Look up the FCP command IOCB and create pseudo response IOCB */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	if (unlikely(!cmdiocbq)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0374 FCP complete with no corresponding "
+				"cmdiocb: iotag (%d)\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+		return;
+	}
+	if (unlikely(!cmdiocbq->iocb_cmpl)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0375 FCP cmdiocb not callback function "
+				"iotag: (%d)\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+		return;
+	}
+
+	/* Fake the irspiocb and copy necessary response information */
+	lpfc_sli4_iocb_param_transfer(&irspiocbq, cmdiocbq, wcqe);
+
+	/* Pass the cmd_iocb and the rsp state to the upper layer */
+	(cmdiocbq->iocb_cmpl)(phba, cmdiocbq, &irspiocbq);
+}
+
+/**
+ * lpfc_sli4_fp_handle_rel_wcqe - Handle fast-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an fast-path WQ entry comsumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_fp_handle_rel_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			     struct lpfc_wcqe_release *wcqe)
+{
+	struct lpfc_queue *childwq;
+	bool wqid_matched = false;
+	uint16_t fcp_wqid;
+
+	/* Check for fast-path FCP work queue release */
+	fcp_wqid = bf_get(lpfc_wcqe_r_wq_id, wcqe);
+	list_for_each_entry(childwq, &cq->child_list, list) {
+		if (childwq->queue_id == fcp_wqid) {
+			lpfc_sli4_wq_release(childwq,
+					bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+			wqid_matched = true;
+			break;
+		}
+	}
+	/* Report warning log message if no match found */
+	if (wqid_matched != true)
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"2580 Fast-path wqe consume event carries "
+				"miss-matched qid: wcqe-qid=x%x\n", fcp_wqid);
+}
+
+/**
+ * lpfc_sli4_fp_handle_wcqe - Process fast-path work queue completion entry
+ * @cq: Pointer to the completion queue.
+ * @eqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static int
+lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			 struct lpfc_cqe *cqe)
+{
+	struct lpfc_wcqe_release wcqe;
+	bool workposted = false;
+
+	/* Copy the work queue CQE and convert endian order if needed */
+	lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+	/* Check and process for different type of WCQE and dispatch */
+	switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+	case CQE_CODE_COMPL_WQE:
+		/* Process the WQ complete event */
+		lpfc_sli4_fp_handle_fcp_wcqe(phba,
+				(struct lpfc_wcqe_complete *)&wcqe);
+		break;
+	case CQE_CODE_RELEASE_WQE:
+		/* Process the WQ release event */
+		lpfc_sli4_fp_handle_rel_wcqe(phba, cq,
+				(struct lpfc_wcqe_release *)&wcqe);
+		break;
+	case CQE_CODE_XRI_ABORTED:
+		/* Process the WQ XRI abort event */
+		workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+				(struct sli4_wcqe_xri_aborted *)&wcqe);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0144 Not a valid WCQE code: x%x\n",
+				bf_get(lpfc_wcqe_c_code, &wcqe));
+		break;
+	}
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_fp_handle_eqe - Process a fast-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the fast-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on the completion queue, rearm the
+ * completion queue, and then return.
+ **/
+static void
+lpfc_sli4_fp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe,
+			uint32_t fcp_cqidx)
+{
+	struct lpfc_queue *cq;
+	struct lpfc_cqe *cqe;
+	bool workposted = false;
+	uint16_t cqid;
+	int ecount = 0;
+
+	if (unlikely(bf_get(lpfc_eqe_major_code, eqe) != 0) ||
+	    unlikely(bf_get(lpfc_eqe_minor_code, eqe) != 0)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0366 Not a valid fast-path completion "
+				"event: majorcode=x%x, minorcode=x%x\n",
+				bf_get(lpfc_eqe_major_code, eqe),
+				bf_get(lpfc_eqe_minor_code, eqe));
+		return;
+	}
+
+	cq = phba->sli4_hba.fcp_cq[fcp_cqidx];
+	if (unlikely(!cq)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0367 Fast-path completion queue does not "
+				"exist\n");
+		return;
+	}
+
+	/* Get the reference to the corresponding CQ */
+	cqid = bf_get(lpfc_eqe_resource_id, eqe);
+	if (unlikely(cqid != cq->queue_id)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0368 Miss-matched fast-path completion "
+				"queue identifier: eqcqid=%d, fcpcqid=%d\n",
+				cqid, cq->queue_id);
+		return;
+	}
+
+	/* Process all the entries to the CQ */
+	while ((cqe = lpfc_sli4_cq_get(cq))) {
+		workposted |= lpfc_sli4_fp_handle_wcqe(phba, cq, cqe);
+		if (!(++ecount % LPFC_GET_QE_REL_INT))
+			lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+	}
+
+	/* Catch the no cq entry condition */
+	if (unlikely(ecount == 0))
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0369 No entry from fast-path completion "
+				"queue fcpcqid=%d\n", cq->queue_id);
+
+	/* In any case, flash and re-arm the CQ */
+	lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+
+	/* wake up worker thread if there are works to be done */
+	if (workposted)
+		lpfc_worker_wake_up(phba);
+}
+
+static void
+lpfc_sli4_eq_flush(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+	struct lpfc_eqe *eqe;
+
+	/* walk all the EQ entries and drop on the floor */
+	while ((eqe = lpfc_sli4_eq_get(eq)))
+		;
+
+	/* Clear and re-arm the EQ */
+	lpfc_sli4_eq_release(eq, LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_sp_intr_handler - Slow-path interrupt handler to SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-4 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there are slow-path events in
+ * the HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA is
+ * undergoing initialization, the interrupt handler will not process the
+ * interrupt. The link attention and ELS ring attention events are handled
+ * by the worker thread. The interrupt handler signals the worker thread
+ * and returns for these events. This function is called without any lock
+ * held. It gets the hbalock to access and update SLI data structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_sp_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba *phba;
+	struct lpfc_queue *speq;
+	struct lpfc_eqe *eqe;
+	unsigned long iflag;
+	int ecount = 0;
+
+	/*
+	 * Get the driver's phba structure from the dev_id
+	 */
+	phba = (struct lpfc_hba *)dev_id;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/* Get to the EQ struct associated with this vector */
+	speq = phba->sli4_hba.sp_eq;
+
+	/* Check device state for handling interrupt */
+	if (unlikely(lpfc_intr_state_check(phba))) {
+		/* Check again for link_state with lock held */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		if (phba->link_state < LPFC_LINK_DOWN)
+			/* Flush, clear interrupt, and rearm the EQ */
+			lpfc_sli4_eq_flush(phba, speq);
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * Process all the event on FCP slow-path EQ
+	 */
+	while ((eqe = lpfc_sli4_eq_get(speq))) {
+		lpfc_sli4_sp_handle_eqe(phba, eqe);
+		if (!(++ecount % LPFC_GET_QE_REL_INT))
+			lpfc_sli4_eq_release(speq, LPFC_QUEUE_NOARM);
+	}
+
+	/* Always clear and re-arm the slow-path EQ */
+	lpfc_sli4_eq_release(speq, LPFC_QUEUE_REARM);
+
+	/* Catch the no cq entry condition */
+	if (unlikely(ecount == 0)) {
+		if (phba->intr_type == MSIX)
+			/* MSI-X treated interrupt served as no EQ share INT */
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0357 MSI-X interrupt with no EQE\n");
+		else
+			/* Non MSI-X treated on interrupt as EQ share INT */
+			return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+} /* lpfc_sli4_sp_intr_handler */
+
+/**
+ * lpfc_sli4_fp_intr_handler - Fast-path interrupt handler to SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-4 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures. Note that,
+ * the FCP EQ to FCP CQ are one-to-one map such that the FCP EQ index is
+ * equal to that of FCP CQ index.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_fp_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba *phba;
+	struct lpfc_fcp_eq_hdl *fcp_eq_hdl;
+	struct lpfc_queue *fpeq;
+	struct lpfc_eqe *eqe;
+	unsigned long iflag;
+	int ecount = 0;
+	uint32_t fcp_eqidx;
+
+	/* Get the driver's phba structure from the dev_id */
+	fcp_eq_hdl = (struct lpfc_fcp_eq_hdl *)dev_id;
+	phba = fcp_eq_hdl->phba;
+	fcp_eqidx = fcp_eq_hdl->idx;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/* Get to the EQ struct associated with this vector */
+	fpeq = phba->sli4_hba.fp_eq[fcp_eqidx];
+
+	/* Check device state for handling interrupt */
+	if (unlikely(lpfc_intr_state_check(phba))) {
+		/* Check again for link_state with lock held */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		if (phba->link_state < LPFC_LINK_DOWN)
+			/* Flush, clear interrupt, and rearm the EQ */
+			lpfc_sli4_eq_flush(phba, fpeq);
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * Process all the event on FCP fast-path EQ
+	 */
+	while ((eqe = lpfc_sli4_eq_get(fpeq))) {
+		lpfc_sli4_fp_handle_eqe(phba, eqe, fcp_eqidx);
+		if (!(++ecount % LPFC_GET_QE_REL_INT))
+			lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_NOARM);
+	}
+
+	/* Always clear and re-arm the fast-path EQ */
+	lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
+
+	if (unlikely(ecount == 0)) {
+		if (phba->intr_type == MSIX)
+			/* MSI-X treated interrupt served as no EQ share INT */
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0358 MSI-X interrupt with no EQE\n");
+		else
+			/* Non MSI-X treated on interrupt as EQ share INT */
+			return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+} /* lpfc_sli4_fp_intr_handler */
+
+/**
+ * lpfc_sli4_intr_handler - Device-level interrupt handler for SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is the device-level interrupt handler to device with SLI-4
+ * interface spec, called from the PCI layer when either MSI or Pin-IRQ
+ * interrupt mode is enabled and there is an event in the HBA which requires
+ * driver attention. This function invokes the slow-path interrupt attention
+ * handling function and fast-path interrupt attention handling function in
+ * turn to process the relevant HBA attention events. This function is called
+ * without any lock held. It gets the hbalock to access and update SLI data
+ * structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled, else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba  *phba;
+	irqreturn_t sp_irq_rc, fp_irq_rc;
+	bool fp_handled = false;
+	uint32_t fcp_eqidx;
+
+	/* Get the driver's phba structure from the dev_id */
+	phba = (struct lpfc_hba *)dev_id;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/*
+	 * Invokes slow-path host attention interrupt handling as appropriate.
+	 */
+	sp_irq_rc = lpfc_sli4_sp_intr_handler(irq, dev_id);
+
+	/*
+	 * Invoke fast-path host attention interrupt handling as appropriate.
+	 */
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+		fp_irq_rc = lpfc_sli4_fp_intr_handler(irq,
+					&phba->sli4_hba.fcp_eq_hdl[fcp_eqidx]);
+		if (fp_irq_rc == IRQ_HANDLED)
+			fp_handled |= true;
+	}
+
+	return (fp_handled == true) ? IRQ_HANDLED : sp_irq_rc;
+} /* lpfc_sli4_intr_handler */
+
+/**
+ * lpfc_sli4_queue_free - free a queue structure and associated memory
+ * @queue: The queue structure to free.
+ *
+ * This function frees a queue structure and the DMAable memeory used for
+ * the host resident queue. This function must be called after destroying the
+ * queue on the HBA.
+ **/
+void
+lpfc_sli4_queue_free(struct lpfc_queue *queue)
+{
+	struct lpfc_dmabuf *dmabuf;
+
+	if (!queue)
+		return;
+
+	while (!list_empty(&queue->page_list)) {
+		list_remove_head(&queue->page_list, dmabuf, struct lpfc_dmabuf,
+				 list);
+		dma_free_coherent(&queue->phba->pcidev->dev, PAGE_SIZE,
+				  dmabuf->virt, dmabuf->phys);
+		kfree(dmabuf);
+	}
+	kfree(queue);
+	return;
+}
+
+/**
+ * lpfc_sli4_queue_alloc - Allocate and initialize a queue structure
+ * @phba: The HBA that this queue is being created on.
+ * @entry_size: The size of each queue entry for this queue.
+ * @entry count: The number of entries that this queue will handle.
+ *
+ * This function allocates a queue structure and the DMAable memory used for
+ * the host resident queue. This function must be called before creating the
+ * queue on the HBA.
+ **/
+struct lpfc_queue *
+lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t entry_size,
+		      uint32_t entry_count)
+{
+	struct lpfc_queue *queue;
+	struct lpfc_dmabuf *dmabuf;
+	int x, total_qe_count;
+	void *dma_pointer;
+
+
+	queue = kzalloc(sizeof(struct lpfc_queue) +
+			(sizeof(union sli4_qe) * entry_count), GFP_KERNEL);
+	if (!queue)
+		return NULL;
+	queue->page_count = (PAGE_ALIGN(entry_size * entry_count))/PAGE_SIZE;
+	INIT_LIST_HEAD(&queue->list);
+	INIT_LIST_HEAD(&queue->page_list);
+	INIT_LIST_HEAD(&queue->child_list);
+	for (x = 0, total_qe_count = 0; x < queue->page_count; x++) {
+		dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+		if (!dmabuf)
+			goto out_fail;
+		dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+						  PAGE_SIZE, &dmabuf->phys,
+						  GFP_KERNEL);
+		if (!dmabuf->virt) {
+			kfree(dmabuf);
+			goto out_fail;
+		}
+		dmabuf->buffer_tag = x;
+		list_add_tail(&dmabuf->list, &queue->page_list);
+		/* initialize queue's entry array */
+		dma_pointer = dmabuf->virt;
+		for (; total_qe_count < entry_count &&
+		     dma_pointer < (PAGE_SIZE + dmabuf->virt);
+		     total_qe_count++, dma_pointer += entry_size) {
+			queue->qe[total_qe_count].address = dma_pointer;
+		}
+	}
+	queue->entry_size = entry_size;
+	queue->entry_count = entry_count;
+	queue->phba = phba;
+
+	return queue;
+out_fail:
+	lpfc_sli4_queue_free(queue);
+	return NULL;
+}
+
+/**
+ * lpfc_eq_create - Create an Event Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @eq: The queue structure to use to create the event queue.
+ * @imax: The maximum interrupt per second limit.
+ *
+ * This function creates an event queue, as detailed in @eq, on a port,
+ * described by @phba by sending an EQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @eq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the EQ_CREATE mailbox command to the HBA to setup the
+ * event queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax)
+{
+	struct lpfc_mbx_eq_create *eq_create;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	struct lpfc_dmabuf *dmabuf;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint16_t dmult;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_eq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_EQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	eq_create = &mbox->u.mqe.un.eq_create;
+	bf_set(lpfc_mbx_eq_create_num_pages, &eq_create->u.request,
+	       eq->page_count);
+	bf_set(lpfc_eq_context_size, &eq_create->u.request.context,
+	       LPFC_EQE_SIZE);
+	bf_set(lpfc_eq_context_valid, &eq_create->u.request.context, 1);
+	/* Calculate delay multiper from maximum interrupt per second */
+	dmult = LPFC_DMULT_CONST/imax - 1;
+	bf_set(lpfc_eq_context_delay_multi, &eq_create->u.request.context,
+	       dmult);
+	switch (eq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0360 Unsupported EQ count. (%d)\n",
+				eq->entry_count);
+		if (eq->entry_count < 256)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 256:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_256);
+		break;
+	case 512:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_512);
+		break;
+	case 1024:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_1024);
+		break;
+	case 2048:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_2048);
+		break;
+	case 4096:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_4096);
+		break;
+	}
+	list_for_each_entry(dmabuf, &eq->page_list, list) {
+		eq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		eq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	mbox->context1 = NULL;
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *) &eq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2500 EQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	eq->type = LPFC_EQ;
+	eq->subtype = LPFC_NONE;
+	eq->queue_id = bf_get(lpfc_mbx_eq_create_q_id, &eq_create->u.response);
+	if (eq->queue_id == 0xFFFF)
+		status = -ENXIO;
+	eq->host_index = 0;
+	eq->hba_index = 0;
+
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_cq_create - Create a Completion Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @cq: The queue structure to use to create the completion queue.
+ * @eq: The event queue to bind this completion queue to.
+ *
+ * This function creates a completion queue, as detailed in @wq, on a port,
+ * described by @phba by sending a CQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @eq
+ * is used to indicate which event queue to bind this completion queue to. This
+ * function will send the CQ_CREATE mailbox command to the HBA to setup the
+ * completion queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
+	       struct lpfc_queue *eq, uint32_t type, uint32_t subtype)
+{
+	struct lpfc_mbx_cq_create *cq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_cq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_CQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	cq_create = &mbox->u.mqe.un.cq_create;
+	bf_set(lpfc_mbx_cq_create_num_pages, &cq_create->u.request,
+		    cq->page_count);
+	bf_set(lpfc_cq_context_event, &cq_create->u.request.context, 1);
+	bf_set(lpfc_cq_context_valid, &cq_create->u.request.context, 1);
+	bf_set(lpfc_cq_eq_id, &cq_create->u.request.context, eq->queue_id);
+	switch (cq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0361 Unsupported CQ count. (%d)\n",
+				cq->entry_count);
+		if (cq->entry_count < 256)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 256:
+		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+		       LPFC_CQ_CNT_256);
+		break;
+	case 512:
+		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+		       LPFC_CQ_CNT_512);
+		break;
+	case 1024:
+		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+		       LPFC_CQ_CNT_1024);
+		break;
+	}
+	list_for_each_entry(dmabuf, &cq->page_list, list) {
+		cq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		cq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &cq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2501 CQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+	if (cq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	/* link the cq onto the parent eq child list */
+	list_add_tail(&cq->list, &eq->child_list);
+	/* Set up completion queue's type and subtype */
+	cq->type = type;
+	cq->subtype = subtype;
+	cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+	cq->host_index = 0;
+	cq->hba_index = 0;
+out:
+
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_mq_create - Create a mailbox Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @mq: The queue structure to use to create the mailbox queue.
+ *
+ * This function creates a mailbox queue, as detailed in @mq, on a port,
+ * described by @phba by sending a MQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the MQ_CREATE mailbox command to the HBA to setup the
+ * mailbox queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
+	       struct lpfc_queue *cq, uint32_t subtype)
+{
+	struct lpfc_mbx_mq_create *mq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_mq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_MQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	mq_create = &mbox->u.mqe.un.mq_create;
+	bf_set(lpfc_mbx_mq_create_num_pages, &mq_create->u.request,
+		    mq->page_count);
+	bf_set(lpfc_mq_context_cq_id, &mq_create->u.request.context,
+		    cq->queue_id);
+	bf_set(lpfc_mq_context_valid, &mq_create->u.request.context, 1);
+	switch (mq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0362 Unsupported MQ count. (%d)\n",
+				mq->entry_count);
+		if (mq->entry_count < 16)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 16:
+		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+		       LPFC_MQ_CNT_16);
+		break;
+	case 32:
+		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+		       LPFC_MQ_CNT_32);
+		break;
+	case 64:
+		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+		       LPFC_MQ_CNT_64);
+		break;
+	case 128:
+		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+		       LPFC_MQ_CNT_128);
+		break;
+	}
+	list_for_each_entry(dmabuf, &mq->page_list, list) {
+		mq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		mq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &mq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2502 MQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id, &mq_create->u.response);
+	if (mq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	mq->type = LPFC_MQ;
+	mq->subtype = subtype;
+	mq->host_index = 0;
+	mq->hba_index = 0;
+
+	/* link the mq onto the parent cq child list */
+	list_add_tail(&mq->list, &cq->child_list);
+out:
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_wq_create - Create a Work Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @wq: The queue structure to use to create the work queue.
+ * @cq: The completion queue to bind this work queue to.
+ * @subtype: The subtype of the work queue indicating its functionality.
+ *
+ * This function creates a work queue, as detailed in @wq, on a port, described
+ * by @phba by sending a WQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @wq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @cq
+ * is used to indicate which completion queue to bind this work queue to. This
+ * function will send the WQ_CREATE mailbox command to the HBA to setup the
+ * work queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
+	       struct lpfc_queue *cq, uint32_t subtype)
+{
+	struct lpfc_mbx_wq_create *wq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_wq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_WQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	wq_create = &mbox->u.mqe.un.wq_create;
+	bf_set(lpfc_mbx_wq_create_num_pages, &wq_create->u.request,
+		    wq->page_count);
+	bf_set(lpfc_mbx_wq_create_cq_id, &wq_create->u.request,
+		    cq->queue_id);
+	list_for_each_entry(dmabuf, &wq->page_list, list) {
+		wq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		wq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &wq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2503 WQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id, &wq_create->u.response);
+	if (wq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	wq->type = LPFC_WQ;
+	wq->subtype = subtype;
+	wq->host_index = 0;
+	wq->hba_index = 0;
+
+	/* link the wq onto the parent cq child list */
+	list_add_tail(&wq->list, &cq->child_list);
+out:
+	if (rc == MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_rq_create - Create a Receive Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @hrq: The queue structure to use to create the header receive queue.
+ * @drq: The queue structure to use to create the data receive queue.
+ * @cq: The completion queue to bind this work queue to.
+ *
+ * This function creates a receive buffer queue pair , as detailed in @hrq and
+ * @drq, on a port, described by @phba by sending a RQ_CREATE mailbox command
+ * to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @drq and @hrq
+ * struct is used to get the entry count that is necessary to determine the
+ * number of pages to use for this queue. The @cq is used to indicate which
+ * completion queue to bind received buffers that are posted to these queues to.
+ * This function will send the RQ_CREATE mailbox command to the HBA to setup the
+ * receive queue pair. This function is asynchronous and will wait for the
+ * mailbox command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+	       struct lpfc_queue *drq, struct lpfc_queue *cq, uint32_t subtype)
+{
+	struct lpfc_mbx_rq_create *rq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (hrq->entry_count != drq->entry_count)
+		return -EINVAL;
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_rq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	rq_create = &mbox->u.mqe.un.rq_create;
+	switch (hrq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2535 Unsupported RQ count. (%d)\n",
+				hrq->entry_count);
+		if (hrq->entry_count < 512)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 512:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_512);
+		break;
+	case 1024:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_1024);
+		break;
+	case 2048:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_2048);
+		break;
+	case 4096:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_4096);
+		break;
+	}
+	bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
+	       cq->queue_id);
+	bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
+	       hrq->page_count);
+	bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+	       LPFC_HDR_BUF_SIZE);
+	list_for_each_entry(dmabuf, &hrq->page_list, list) {
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2504 RQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	hrq->queue_id = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+	if (hrq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	hrq->type = LPFC_HRQ;
+	hrq->subtype = subtype;
+	hrq->host_index = 0;
+	hrq->hba_index = 0;
+
+	/* now create the data queue */
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	switch (drq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2536 Unsupported RQ count. (%d)\n",
+				drq->entry_count);
+		if (drq->entry_count < 512)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 512:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_512);
+		break;
+	case 1024:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_1024);
+		break;
+	case 2048:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_2048);
+		break;
+	case 4096:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_4096);
+		break;
+	}
+	bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
+	       cq->queue_id);
+	bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
+	       drq->page_count);
+	bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+	       LPFC_DATA_BUF_SIZE);
+	list_for_each_entry(dmabuf, &drq->page_list, list) {
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		status = -ENXIO;
+		goto out;
+	}
+	drq->queue_id = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+	if (drq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	drq->type = LPFC_DRQ;
+	drq->subtype = subtype;
+	drq->host_index = 0;
+	drq->hba_index = 0;
+
+	/* link the header and data RQs onto the parent cq child list */
+	list_add_tail(&hrq->list, &cq->child_list);
+	list_add_tail(&drq->list, &cq->child_list);
+
+out:
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_eq_destroy - Destroy an event Queue on the HBA
+ * @eq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @eq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @eq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_eq_destroy(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!eq)
+		return -ENODEV;
+	mbox = mempool_alloc(eq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_eq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_EQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_eq_destroy_q_id, &mbox->u.mqe.un.eq_destroy.u.request,
+	       eq->queue_id);
+	mbox->vport = eq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+
+	rc = lpfc_sli_issue_mbox(eq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.eq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2505 EQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+
+	/* Remove eq from any list */
+	list_del_init(&eq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, eq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_cq_destroy - Destroy a Completion Queue on the HBA
+ * @cq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @cq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @cq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!cq)
+		return -ENODEV;
+	mbox = mempool_alloc(cq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_cq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_CQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_cq_destroy_q_id, &mbox->u.mqe.un.cq_destroy.u.request,
+	       cq->queue_id);
+	mbox->vport = cq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(cq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.wq_create.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2506 CQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	/* Remove cq from any list */
+	list_del_init(&cq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, cq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_mq_destroy - Destroy a Mailbox Queue on the HBA
+ * @qm: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @mq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @mq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!mq)
+		return -ENODEV;
+	mbox = mempool_alloc(mq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_mq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_MQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_mq_destroy_q_id, &mbox->u.mqe.un.mq_destroy.u.request,
+	       mq->queue_id);
+	mbox->vport = mq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(mq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.mq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2507 MQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	/* Remove mq from any list */
+	list_del_init(&mq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, mq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_wq_destroy - Destroy a Work Queue on the HBA
+ * @wq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @wq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @wq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_wq_destroy(struct lpfc_hba *phba, struct lpfc_queue *wq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!wq)
+		return -ENODEV;
+	mbox = mempool_alloc(wq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_wq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_wq_destroy_q_id, &mbox->u.mqe.un.wq_destroy.u.request,
+	       wq->queue_id);
+	mbox->vport = wq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(wq->phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.wq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2508 WQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	/* Remove wq from any list */
+	list_del_init(&wq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, wq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_rq_destroy - Destroy a Receive Queue on the HBA
+ * @rq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @rq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @rq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+		struct lpfc_queue *drq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!hrq || !drq)
+		return -ENODEV;
+	mbox = mempool_alloc(hrq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_rq_destroy) -
+		  sizeof(struct mbox_header));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
+	       hrq->queue_id);
+	mbox->vport = hrq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(hrq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.rq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2509 RQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		if (rc != MBX_TIMEOUT)
+			mempool_free(mbox, hrq->phba->mbox_mem_pool);
+		return -ENXIO;
+	}
+	bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
+	       drq->queue_id);
+	rc = lpfc_sli_issue_mbox(drq->phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.rq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2510 RQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	list_del_init(&hrq->list);
+	list_del_init(&drq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, hrq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_sli4_post_sgl - Post scatter gather list for an XRI to HBA
+ * @phba: The virtual port for which this call being executed.
+ * @pdma_phys_addr0: Physical address of the 1st SGL page.
+ * @pdma_phys_addr1: Physical address of the 2nd SGL page.
+ * @xritag: the xritag that ties this io to the SGL pages.
+ *
+ * This routine will post the sgl pages for the IO that has the xritag
+ * that is in the iocbq structure. The xritag is assigned during iocbq
+ * creation and persists for as long as the driver is loaded.
+ * if the caller has fewer than 256 scatter gather segments to map then
+ * pdma_phys_addr1 should be 0.
+ * If the caller needs to map more than 256 scatter gather segment then
+ * pdma_phys_addr1 should be a valid physical address.
+ * physical address for SGLs must be 64 byte aligned.
+ * If you are going to map 2 SGL's then the first one must have 256 entries
+ * the second sgl can have between 1 and 256 entries.
+ *
+ * Return codes:
+ * 	0 - Success
+ * 	-ENXIO, -ENOMEM - Failure
+ **/
+int
+lpfc_sli4_post_sgl(struct lpfc_hba *phba,
+		dma_addr_t pdma_phys_addr0,
+		dma_addr_t pdma_phys_addr1,
+		uint16_t xritag)
+{
+	struct lpfc_mbx_post_sgl_pages *post_sgl_pages;
+	LPFC_MBOXQ_t *mbox;
+	int rc;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (xritag == NO_XRI) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0364 Invalid param:\n");
+		return -EINVAL;
+	}
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
+			sizeof(struct lpfc_mbx_post_sgl_pages) -
+			sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+
+	post_sgl_pages = (struct lpfc_mbx_post_sgl_pages *)
+				&mbox->u.mqe.un.post_sgl_pages;
+	bf_set(lpfc_post_sgl_pages_xri, post_sgl_pages, xritag);
+	bf_set(lpfc_post_sgl_pages_xricnt, post_sgl_pages, 1);
+
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg0_addr_lo	=
+				cpu_to_le32(putPaddrLow(pdma_phys_addr0));
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg0_addr_hi =
+				cpu_to_le32(putPaddrHigh(pdma_phys_addr0));
+
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg1_addr_lo	=
+				cpu_to_le32(putPaddrLow(pdma_phys_addr1));
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg1_addr_hi =
+				cpu_to_le32(putPaddrHigh(pdma_phys_addr1));
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &post_sgl_pages->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2511 POST_SGL mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return 0;
+}
+/**
+ * lpfc_sli4_remove_all_sgl_pages - Post scatter gather list for an XRI to HBA
+ * @phba: The virtual port for which this call being executed.
+ *
+ * This routine will remove all of the sgl pages registered with the hba.
+ *
+ * Return codes:
+ * 	0 - Success
+ * 	-ENXIO, -ENOMEM - Failure
+ **/
+int
+lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES, 0,
+			LPFC_SLI4_MBX_EMBED);
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2512 REMOVE_ALL_SGL_PAGES mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_next_xritag - Get an xritag for the io
+ * @phba: Pointer to HBA context object.
+ *
+ * This function gets an xritag for the iocb. If there is no unused xritag
+ * it will return 0xffff.
+ * The function returns the allocated xritag if successful, else returns zero.
+ * Zero is not a valid xritag.
+ * The caller is not required to hold any lock.
+ **/
+uint16_t
+lpfc_sli4_next_xritag(struct lpfc_hba *phba)
+{
+	uint16_t xritag;
+
+	spin_lock_irq(&phba->hbalock);
+	xritag = phba->sli4_hba.next_xri;
+	if ((xritag != (uint16_t) -1) && xritag <
+		(phba->sli4_hba.max_cfg_param.max_xri
+			+ phba->sli4_hba.max_cfg_param.xri_base)) {
+		phba->sli4_hba.next_xri++;
+		phba->sli4_hba.max_cfg_param.xri_used++;
+		spin_unlock_irq(&phba->hbalock);
+		return xritag;
+	}
+	spin_unlock_irq(&phba->hbalock);
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2004 Failed to allocate XRI.last XRITAG is %d"
+			" Max XRI is %d, Used XRI is %d\n",
+			phba->sli4_hba.next_xri,
+			phba->sli4_hba.max_cfg_param.max_xri,
+			phba->sli4_hba.max_cfg_param.xri_used);
+	return -1;
+}
+
+/**
+ * lpfc_sli4_post_sgl_list - post a block of sgl list to the firmware.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post a block of driver's sgl pages to the
+ * HBA using non-embedded mailbox command. No Lock is held. This routine
+ * is only called when the driver is loading and after all IO has been
+ * stopped.
+ **/
+int
+lpfc_sli4_post_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry;
+	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+	struct sgl_page_pairs *sgl_pg_pairs;
+	void *viraddr;
+	LPFC_MBOXQ_t *mbox;
+	uint32_t reqlen, alloclen, pg_pairs;
+	uint32_t mbox_tmo;
+	uint16_t xritag_start = 0;
+	int els_xri_cnt, rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* The number of sgls to be posted */
+	els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+
+	reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) +
+		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+	if (reqlen > PAGE_SIZE) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2559 Block sgl registration required DMA "
+				"size (%d) great than a page\n", reqlen);
+		return -ENOMEM;
+	}
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2560 Failed to allocate mbox cmd memory\n");
+		return -ENOMEM;
+	}
+
+	/* Allocate DMA memory and set up the non-embedded mailbox command */
+	alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
+			 LPFC_SLI4_MBX_NEMBED);
+
+	if (alloclen < reqlen) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0285 Allocated DMA memory size (%d) is "
+				"less than the requested DMA memory "
+				"size (%d)\n", alloclen, reqlen);
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+
+	/* Get the first SGE entry from the non-embedded DMA memory */
+	if (unlikely(!mbox->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2525 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+	viraddr = mbox->sge_array->addr[0];
+
+	/* Set up the SGL pages in the non-embedded DMA pages */
+	sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+	sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+	for (pg_pairs = 0; pg_pairs < els_xri_cnt; pg_pairs++) {
+		sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[pg_pairs];
+		/* Set up the sge entry */
+		sgl_pg_pairs->sgl_pg0_addr_lo =
+				cpu_to_le32(putPaddrLow(sglq_entry->phys));
+		sgl_pg_pairs->sgl_pg0_addr_hi =
+				cpu_to_le32(putPaddrHigh(sglq_entry->phys));
+		sgl_pg_pairs->sgl_pg1_addr_lo =
+				cpu_to_le32(putPaddrLow(0));
+		sgl_pg_pairs->sgl_pg1_addr_hi =
+				cpu_to_le32(putPaddrHigh(0));
+		/* Keep the first xritag on the list */
+		if (pg_pairs == 0)
+			xritag_start = sglq_entry->sli4_xritag;
+		sgl_pg_pairs++;
+	}
+	bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+	pg_pairs = (pg_pairs > 0) ? (pg_pairs - 1) : pg_pairs;
+	bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+	/* Perform endian conversion if necessary */
+	sgl->word0 = cpu_to_le32(sgl->word0);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2513 POST_SGL_BLOCK mailbox command failed "
+				"status x%x add_status x%x mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_post_scsi_sgl_block - post a block of scsi sgl list to firmware
+ * @phba: pointer to lpfc hba data structure.
+ * @sblist: pointer to scsi buffer list.
+ * @count: number of scsi buffers on the list.
+ *
+ * This routine is invoked to post a block of @count scsi sgl pages from a
+ * SCSI buffer list @sblist to the HBA using non-embedded mailbox command.
+ * No Lock is held.
+ *
+ **/
+int
+lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist,
+			      int cnt)
+{
+	struct lpfc_scsi_buf *psb;
+	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+	struct sgl_page_pairs *sgl_pg_pairs;
+	void *viraddr;
+	LPFC_MBOXQ_t *mbox;
+	uint32_t reqlen, alloclen, pg_pairs;
+	uint32_t mbox_tmo;
+	uint16_t xritag_start = 0;
+	int rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	dma_addr_t pdma_phys_bpl1;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* Calculate the requested length of the dma memory */
+	reqlen = cnt * sizeof(struct sgl_page_pairs) +
+		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+	if (reqlen > PAGE_SIZE) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0217 Block sgl registration required DMA "
+				"size (%d) great than a page\n", reqlen);
+		return -ENOMEM;
+	}
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0283 Failed to allocate mbox cmd memory\n");
+		return -ENOMEM;
+	}
+
+	/* Allocate DMA memory and set up the non-embedded mailbox command */
+	alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+				LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
+				LPFC_SLI4_MBX_NEMBED);
+
+	if (alloclen < reqlen) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2561 Allocated DMA memory size (%d) is "
+				"less than the requested DMA memory "
+				"size (%d)\n", alloclen, reqlen);
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+
+	/* Get the first SGE entry from the non-embedded DMA memory */
+	if (unlikely(!mbox->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2565 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+	viraddr = mbox->sge_array->addr[0];
+
+	/* Set up the SGL pages in the non-embedded DMA pages */
+	sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+	sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+	pg_pairs = 0;
+	list_for_each_entry(psb, sblist, list) {
+		/* Set up the sge entry */
+		sgl_pg_pairs->sgl_pg0_addr_lo =
+			cpu_to_le32(putPaddrLow(psb->dma_phys_bpl));
+		sgl_pg_pairs->sgl_pg0_addr_hi =
+			cpu_to_le32(putPaddrHigh(psb->dma_phys_bpl));
+		if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+			pdma_phys_bpl1 = psb->dma_phys_bpl + SGL_PAGE_SIZE;
+		else
+			pdma_phys_bpl1 = 0;
+		sgl_pg_pairs->sgl_pg1_addr_lo =
+			cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
+		sgl_pg_pairs->sgl_pg1_addr_hi =
+			cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
+		/* Keep the first xritag on the list */
+		if (pg_pairs == 0)
+			xritag_start = psb->cur_iocbq.sli4_xritag;
+		sgl_pg_pairs++;
+		pg_pairs++;
+	}
+	bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+	bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+	/* Perform endian conversion if necessary */
+	sgl->word0 = cpu_to_le32(sgl->word0);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2564 POST_SGL_BLOCK mailbox command failed "
+				"status x%x add_status x%x mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_fc_frame_check - Check that this frame is a valid frame to handle
+ * @phba: pointer to lpfc_hba struct that the frame was received on
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ *
+ * This function checks the fields in the @fc_hdr to see if the FC frame is a
+ * valid type of frame that the LPFC driver will handle. This function will
+ * return a zero if the frame is a valid frame or a non zero value when the
+ * frame does not pass the check.
+ **/
+static int
+lpfc_fc_frame_check(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr)
+{
+	char *rctl_names[] = FC_RCTL_NAMES_INIT;
+	char *type_names[] = FC_TYPE_NAMES_INIT;
+	struct fc_vft_header *fc_vft_hdr;
+
+	switch (fc_hdr->fh_r_ctl) {
+	case FC_RCTL_DD_UNCAT:		/* uncategorized information */
+	case FC_RCTL_DD_SOL_DATA:	/* solicited data */
+	case FC_RCTL_DD_UNSOL_CTL:	/* unsolicited control */
+	case FC_RCTL_DD_SOL_CTL:	/* solicited control or reply */
+	case FC_RCTL_DD_UNSOL_DATA:	/* unsolicited data */
+	case FC_RCTL_DD_DATA_DESC:	/* data descriptor */
+	case FC_RCTL_DD_UNSOL_CMD:	/* unsolicited command */
+	case FC_RCTL_DD_CMD_STATUS:	/* command status */
+	case FC_RCTL_ELS_REQ:	/* extended link services request */
+	case FC_RCTL_ELS_REP:	/* extended link services reply */
+	case FC_RCTL_ELS4_REQ:	/* FC-4 ELS request */
+	case FC_RCTL_ELS4_REP:	/* FC-4 ELS reply */
+	case FC_RCTL_BA_NOP:  	/* basic link service NOP */
+	case FC_RCTL_BA_ABTS: 	/* basic link service abort */
+	case FC_RCTL_BA_RMC: 	/* remove connection */
+	case FC_RCTL_BA_ACC:	/* basic accept */
+	case FC_RCTL_BA_RJT:	/* basic reject */
+	case FC_RCTL_BA_PRMT:
+	case FC_RCTL_ACK_1:	/* acknowledge_1 */
+	case FC_RCTL_ACK_0:	/* acknowledge_0 */
+	case FC_RCTL_P_RJT:	/* port reject */
+	case FC_RCTL_F_RJT:	/* fabric reject */
+	case FC_RCTL_P_BSY:	/* port busy */
+	case FC_RCTL_F_BSY:	/* fabric busy to data frame */
+	case FC_RCTL_F_BSYL:	/* fabric busy to link control frame */
+	case FC_RCTL_LCR:	/* link credit reset */
+	case FC_RCTL_END:	/* end */
+		break;
+	case FC_RCTL_VFTH:	/* Virtual Fabric tagging Header */
+		fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
+		fc_hdr = &((struct fc_frame_header *)fc_vft_hdr)[1];
+		return lpfc_fc_frame_check(phba, fc_hdr);
+	default:
+		goto drop;
+	}
+	switch (fc_hdr->fh_type) {
+	case FC_TYPE_BLS:
+	case FC_TYPE_ELS:
+	case FC_TYPE_FCP:
+	case FC_TYPE_CT:
+		break;
+	case FC_TYPE_IP:
+	case FC_TYPE_ILS:
+	default:
+		goto drop;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
+			"2538 Received frame rctl:%s type:%s\n",
+			rctl_names[fc_hdr->fh_r_ctl],
+			type_names[fc_hdr->fh_type]);
+	return 0;
+drop:
+	lpfc_printf_log(phba, KERN_WARNING, LOG_ELS,
+			"2539 Dropped frame rctl:%s type:%s\n",
+			rctl_names[fc_hdr->fh_r_ctl],
+			type_names[fc_hdr->fh_type]);
+	return 1;
+}
+
+/**
+ * lpfc_fc_hdr_get_vfi - Get the VFI from an FC frame
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ *
+ * This function processes the FC header to retrieve the VFI from the VF
+ * header, if one exists. This function will return the VFI if one exists
+ * or 0 if no VSAN Header exists.
+ **/
+static uint32_t
+lpfc_fc_hdr_get_vfi(struct fc_frame_header *fc_hdr)
+{
+	struct fc_vft_header *fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
+
+	if (fc_hdr->fh_r_ctl != FC_RCTL_VFTH)
+		return 0;
+	return bf_get(fc_vft_hdr_vf_id, fc_vft_hdr);
+}
+
+/**
+ * lpfc_fc_frame_to_vport - Finds the vport that a frame is destined to
+ * @phba: Pointer to the HBA structure to search for the vport on
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ * @fcfi: The FC Fabric ID that the frame came from
+ *
+ * This function searches the @phba for a vport that matches the content of the
+ * @fc_hdr passed in and the @fcfi. This function uses the @fc_hdr to fetch the
+ * VFI, if the Virtual Fabric Tagging Header exists, and the DID. This function
+ * returns the matching vport pointer or NULL if unable to match frame to a
+ * vport.
+ **/
+static struct lpfc_vport *
+lpfc_fc_frame_to_vport(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr,
+		       uint16_t fcfi)
+{
+	struct lpfc_vport **vports;
+	struct lpfc_vport *vport = NULL;
+	int i;
+	uint32_t did = (fc_hdr->fh_d_id[0] << 16 |
+			fc_hdr->fh_d_id[1] << 8 |
+			fc_hdr->fh_d_id[2]);
+
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL)
+		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+			if (phba->fcf.fcfi == fcfi &&
+			    vports[i]->vfi == lpfc_fc_hdr_get_vfi(fc_hdr) &&
+			    vports[i]->fc_myDID == did) {
+				vport = vports[i];
+				break;
+			}
+		}
+	lpfc_destroy_vport_work_array(phba, vports);
+	return vport;
+}
+
+/**
+ * lpfc_fc_frame_add - Adds a frame to the vport's list of received sequences
+ * @dmabuf: pointer to a dmabuf that describes the hdr and data of the FC frame
+ *
+ * This function searches through the existing incomplete sequences that have
+ * been sent to this @vport. If the frame matches one of the incomplete
+ * sequences then the dbuf in the @dmabuf is added to the list of frames that
+ * make up that sequence. If no sequence is found that matches this frame then
+ * the function will add the hbuf in the @dmabuf to the @vport's rcv_buffer_list
+ * This function returns a pointer to the first dmabuf in the sequence list that
+ * the frame was linked to.
+ **/
+static struct hbq_dmabuf *
+lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
+{
+	struct fc_frame_header *new_hdr;
+	struct fc_frame_header *temp_hdr;
+	struct lpfc_dmabuf *d_buf;
+	struct lpfc_dmabuf *h_buf;
+	struct hbq_dmabuf *seq_dmabuf = NULL;
+	struct hbq_dmabuf *temp_dmabuf = NULL;
+
+	new_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+	/* Use the hdr_buf to find the sequence that this frame belongs to */
+	list_for_each_entry(h_buf, &vport->rcv_buffer_list, list) {
+		temp_hdr = (struct fc_frame_header *)h_buf->virt;
+		if ((temp_hdr->fh_seq_id != new_hdr->fh_seq_id) ||
+		    (temp_hdr->fh_ox_id != new_hdr->fh_ox_id) ||
+		    (memcmp(&temp_hdr->fh_s_id, &new_hdr->fh_s_id, 3)))
+			continue;
+		/* found a pending sequence that matches this frame */
+		seq_dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+		break;
+	}
+	if (!seq_dmabuf) {
+		/*
+		 * This indicates first frame received for this sequence.
+		 * Queue the buffer on the vport's rcv_buffer_list.
+		 */
+		list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
+		return dmabuf;
+	}
+	temp_hdr = seq_dmabuf->hbuf.virt;
+	if (new_hdr->fh_seq_cnt < temp_hdr->fh_seq_cnt) {
+		list_add(&seq_dmabuf->dbuf.list, &dmabuf->dbuf.list);
+		return dmabuf;
+	}
+	/* find the correct place in the sequence to insert this frame */
+	list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) {
+		temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+		temp_hdr = (struct fc_frame_header *)temp_dmabuf->hbuf.virt;
+		/*
+		 * If the frame's sequence count is greater than the frame on
+		 * the list then insert the frame right after this frame
+		 */
+		if (new_hdr->fh_seq_cnt > temp_hdr->fh_seq_cnt) {
+			list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list);
+			return seq_dmabuf;
+		}
+	}
+	return NULL;
+}
+
+/**
+ * lpfc_seq_complete - Indicates if a sequence is complete
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function checks the sequence, starting with the frame described by
+ * @dmabuf, to see if all the frames associated with this sequence are present.
+ * the frames associated with this sequence are linked to the @dmabuf using the
+ * dbuf list. This function looks for two major things. 1) That the first frame
+ * has a sequence count of zero. 2) There is a frame with last frame of sequence
+ * set. 3) That there are no holes in the sequence count. The function will
+ * return 1 when the sequence is complete, otherwise it will return 0.
+ **/
+static int
+lpfc_seq_complete(struct hbq_dmabuf *dmabuf)
+{
+	struct fc_frame_header *hdr;
+	struct lpfc_dmabuf *d_buf;
+	struct hbq_dmabuf *seq_dmabuf;
+	uint32_t fctl;
+	int seq_count = 0;
+
+	hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+	/* make sure first fame of sequence has a sequence count of zero */
+	if (hdr->fh_seq_cnt != seq_count)
+		return 0;
+	fctl = (hdr->fh_f_ctl[0] << 16 |
+		hdr->fh_f_ctl[1] << 8 |
+		hdr->fh_f_ctl[2]);
+	/* If last frame of sequence we can return success. */
+	if (fctl & FC_FC_END_SEQ)
+		return 1;
+	list_for_each_entry(d_buf, &dmabuf->dbuf.list, list) {
+		seq_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+		hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+		/* If there is a hole in the sequence count then fail. */
+		if (++seq_count != hdr->fh_seq_cnt)
+			return 0;
+		fctl = (hdr->fh_f_ctl[0] << 16 |
+			hdr->fh_f_ctl[1] << 8 |
+			hdr->fh_f_ctl[2]);
+		/* If last frame of sequence we can return success. */
+		if (fctl & FC_FC_END_SEQ)
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_prep_seq - Prep sequence for ULP processing
+ * @vport: Pointer to the vport on which this sequence was received
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function takes a sequence, described by a list of frames, and creates
+ * a list of iocbq structures to describe the sequence. This iocbq list will be
+ * used to issue to the generic unsolicited sequence handler. This routine
+ * returns a pointer to the first iocbq in the list. If the function is unable
+ * to allocate an iocbq then it throw out the received frames that were not
+ * able to be described and return a pointer to the first iocbq. If unable to
+ * allocate any iocbqs (including the first) this function will return NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
+{
+	struct lpfc_dmabuf *d_buf, *n_buf;
+	struct lpfc_iocbq *first_iocbq, *iocbq;
+	struct fc_frame_header *fc_hdr;
+	uint32_t sid;
+
+	fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+	/* remove from receive buffer list */
+	list_del_init(&seq_dmabuf->hbuf.list);
+	/* get the Remote Port's SID */
+	sid = (fc_hdr->fh_s_id[0] << 16 |
+	       fc_hdr->fh_s_id[1] << 8 |
+	       fc_hdr->fh_s_id[2]);
+	/* Get an iocbq struct to fill in. */
+	first_iocbq = lpfc_sli_get_iocbq(vport->phba);
+	if (first_iocbq) {
+		/* Initialize the first IOCB. */
+		first_iocbq->iocb.ulpStatus = IOSTAT_SUCCESS;
+		first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX;
+		first_iocbq->iocb.ulpContext = be16_to_cpu(fc_hdr->fh_ox_id);
+		first_iocbq->iocb.unsli3.rcvsli3.vpi =
+					vport->vpi + vport->phba->vpi_base;
+		/* put the first buffer into the first IOCBq */
+		first_iocbq->context2 = &seq_dmabuf->dbuf;
+		first_iocbq->context3 = NULL;
+		first_iocbq->iocb.ulpBdeCount = 1;
+		first_iocbq->iocb.un.cont64[0].tus.f.bdeSize =
+							LPFC_DATA_BUF_SIZE;
+		first_iocbq->iocb.un.rcvels.remoteID = sid;
+	}
+	iocbq = first_iocbq;
+	/*
+	 * Each IOCBq can have two Buffers assigned, so go through the list
+	 * of buffers for this sequence and save two buffers in each IOCBq
+	 */
+	list_for_each_entry_safe(d_buf, n_buf, &seq_dmabuf->dbuf.list, list) {
+		if (!iocbq) {
+			lpfc_in_buf_free(vport->phba, d_buf);
+			continue;
+		}
+		if (!iocbq->context3) {
+			iocbq->context3 = d_buf;
+			iocbq->iocb.ulpBdeCount++;
+			iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize =
+							LPFC_DATA_BUF_SIZE;
+		} else {
+			iocbq = lpfc_sli_get_iocbq(vport->phba);
+			if (!iocbq) {
+				if (first_iocbq) {
+					first_iocbq->iocb.ulpStatus =
+							IOSTAT_FCP_RSP_ERROR;
+					first_iocbq->iocb.un.ulpWord[4] =
+							IOERR_NO_RESOURCES;
+				}
+				lpfc_in_buf_free(vport->phba, d_buf);
+				continue;
+			}
+			iocbq->context2 = d_buf;
+			iocbq->context3 = NULL;
+			iocbq->iocb.ulpBdeCount = 1;
+			iocbq->iocb.un.cont64[0].tus.f.bdeSize =
+							LPFC_DATA_BUF_SIZE;
+			iocbq->iocb.un.rcvels.remoteID = sid;
+			list_add_tail(&iocbq->list, &first_iocbq->list);
+		}
+	}
+	return first_iocbq;
+}
+
+/**
+ * lpfc_sli4_handle_received_buffer - Handle received buffers from firmware
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with no lock held. This function processes all
+ * the received buffers and gives it to upper layers when a received buffer
+ * indicates that it is the final frame in the sequence. The interrupt
+ * service routine processes received buffers at interrupt contexts and adds
+ * received dma buffers to the rb_pend_list queue and signals the worker thread.
+ * Worker thread calls lpfc_sli4_handle_received_buffer, which will call the
+ * appropriate receive function when the final frame in a sequence is received.
+ **/
+int
+lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba)
+{
+	LIST_HEAD(cmplq);
+	struct hbq_dmabuf *dmabuf, *seq_dmabuf;
+	struct fc_frame_header *fc_hdr;
+	struct lpfc_vport *vport;
+	uint32_t fcfi;
+	struct lpfc_iocbq *iocbq;
+
+	/* Clear hba flag and get all received buffers into the cmplq */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~HBA_RECEIVE_BUFFER;
+	list_splice_init(&phba->rb_pend_list, &cmplq);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Process each received buffer */
+	while ((dmabuf = lpfc_sli_hbqbuf_get(&cmplq)) != NULL) {
+		fc_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+		/* check to see if this a valid type of frame */
+		if (lpfc_fc_frame_check(phba, fc_hdr)) {
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+			continue;
+		}
+		fcfi = bf_get(lpfc_rcqe_fcf_id, &dmabuf->rcqe);
+		vport = lpfc_fc_frame_to_vport(phba, fc_hdr, fcfi);
+		if (!vport) {
+			/* throw out the frame */
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+			continue;
+		}
+		/* Link this frame */
+		seq_dmabuf = lpfc_fc_frame_add(vport, dmabuf);
+		if (!seq_dmabuf) {
+			/* unable to add frame to vport - throw it out */
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+			continue;
+		}
+		/* If not last frame in sequence continue processing frames. */
+		if (!lpfc_seq_complete(seq_dmabuf)) {
+			/*
+			 * When saving off frames post a new one and mark this
+			 * frame to be freed when it is finished.
+			 **/
+			lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1);
+			dmabuf->tag = -1;
+			continue;
+		}
+		fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+		iocbq = lpfc_prep_seq(vport, seq_dmabuf);
+		if (!lpfc_complete_unsol_iocb(phba,
+					      &phba->sli.ring[LPFC_ELS_RING],
+					      iocbq, fc_hdr->fh_r_ctl,
+					      fc_hdr->fh_type))
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"2540 Ring %d handler: unexpected Rctl "
+					"x%x Type x%x received\n",
+					LPFC_ELS_RING,
+					fc_hdr->fh_r_ctl, fc_hdr->fh_type);
+	};
+	return 0;
+}
+
+/**
+ * lpfc_sli4_post_all_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * This routine does not require any locks.  It's usage is expected
+ * to be driver load or reset recovery when the driver is
+ * sequential.
+ *
+ * Return codes
+ * 	0 - sucessful
+ *      EIO - The mailbox failed to complete successfully.
+ * 	When this error occurs, the driver is not guaranteed
+ *	to have any rpi regions posted to the device and
+ *	must either attempt to repost the regions or take a
+ *	fatal error.
+ **/
+int
+lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba)
+{
+	struct lpfc_rpi_hdr *rpi_page;
+	uint32_t rc = 0;
+
+	/* Post all rpi memory regions to the port. */
+	list_for_each_entry(rpi_page, &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+		rc = lpfc_sli4_post_rpi_hdr(phba, rpi_page);
+		if (rc != MBX_SUCCESS) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"2008 Error %d posting all rpi "
+					"headers\n", rc);
+			rc = -EIO;
+			break;
+		}
+	}
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_post_rpi_hdr - Post an rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ * @rpi_page:  pointer to the rpi memory region.
+ *
+ * This routine is invoked to post a single rpi header to the
+ * HBA consistent with the SLI-4 interface spec.  This memory region
+ * maps up to 64 rpi context regions.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No available memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
+{
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mbx_post_hdr_tmpl *hdr_tmpl;
+	uint32_t rc = 0;
+	uint32_t mbox_tmo;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* The port is notified of the header region via a mailbox command. */
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2001 Unable to allocate memory for issuing "
+				"SLI_CONFIG_SPECIAL mailbox command\n");
+		return -ENOMEM;
+	}
+
+	/* Post all rpi memory regions to the port. */
+	hdr_tmpl = &mboxq->u.mqe.un.hdr_tmpl;
+	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE,
+			 sizeof(struct lpfc_mbx_post_hdr_tmpl) -
+			 sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt,
+	       hdr_tmpl, rpi_page->page_count);
+	bf_set(lpfc_mbx_post_hdr_tmpl_rpi_offset, hdr_tmpl,
+	       rpi_page->start_rpi);
+	hdr_tmpl->rpi_paddr_lo = putPaddrLow(rpi_page->dmabuf->phys);
+	hdr_tmpl->rpi_paddr_hi = putPaddrHigh(rpi_page->dmabuf->phys);
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	shdr = (union lpfc_sli4_cfg_shdr *) &hdr_tmpl->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2514 POST_RPI_HDR mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_alloc_rpi - Get an available rpi in the device's range
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * Returns
+ * 	A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful
+ * 	LPFC_RPI_ALLOC_ERROR if no rpis are available.
+ **/
+int
+lpfc_sli4_alloc_rpi(struct lpfc_hba *phba)
+{
+	int rpi;
+	uint16_t max_rpi, rpi_base, rpi_limit;
+	uint16_t rpi_remaining;
+	struct lpfc_rpi_hdr *rpi_hdr;
+
+	max_rpi = phba->sli4_hba.max_cfg_param.max_rpi;
+	rpi_base = phba->sli4_hba.max_cfg_param.rpi_base;
+	rpi_limit = phba->sli4_hba.next_rpi;
+
+	/*
+	 * The valid rpi range is not guaranteed to be zero-based.  Start
+	 * the search at the rpi_base as reported by the port.
+	 */
+	spin_lock_irq(&phba->hbalock);
+	rpi = find_next_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit, rpi_base);
+	if (rpi >= rpi_limit || rpi < rpi_base)
+		rpi = LPFC_RPI_ALLOC_ERROR;
+	else {
+		set_bit(rpi, phba->sli4_hba.rpi_bmask);
+		phba->sli4_hba.max_cfg_param.rpi_used++;
+		phba->sli4_hba.rpi_count++;
+	}
+
+	/*
+	 * Don't try to allocate more rpi header regions if the device limit
+	 * on available rpis max has been exhausted.
+	 */
+	if ((rpi == LPFC_RPI_ALLOC_ERROR) &&
+	    (phba->sli4_hba.rpi_count >= max_rpi)) {
+		spin_unlock_irq(&phba->hbalock);
+		return rpi;
+	}
+
+	/*
+	 * If the driver is running low on rpi resources, allocate another
+	 * page now.  Note that the next_rpi value is used because
+	 * it represents how many are actually in use whereas max_rpi notes
+	 * how many are supported max by the device.
+	 */
+	rpi_remaining = phba->sli4_hba.next_rpi - rpi_base -
+		phba->sli4_hba.rpi_count;
+	spin_unlock_irq(&phba->hbalock);
+	if (rpi_remaining < LPFC_RPI_LOW_WATER_MARK) {
+		rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+		if (!rpi_hdr) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"2002 Error Could not grow rpi "
+					"count\n");
+		} else {
+			lpfc_sli4_post_rpi_hdr(phba, rpi_hdr);
+		}
+	}
+
+	return rpi;
+}
+
+/**
+ * lpfc_sli4_free_rpi - Release an rpi for reuse.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release an rpi to the pool of
+ * available rpis maintained by the driver.
+ **/
+void
+lpfc_sli4_free_rpi(struct lpfc_hba *phba, int rpi)
+{
+	spin_lock_irq(&phba->hbalock);
+	clear_bit(rpi, phba->sli4_hba.rpi_bmask);
+	phba->sli4_hba.rpi_count--;
+	phba->sli4_hba.max_cfg_param.rpi_used--;
+	spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli4_remove_rpis - Remove the rpi bitmask region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the memory region that
+ * provided rpi via a bitmask.
+ **/
+void
+lpfc_sli4_remove_rpis(struct lpfc_hba *phba)
+{
+	kfree(phba->sli4_hba.rpi_bmask);
+}
+
+/**
+ * lpfc_sli4_resume_rpi - Remove the rpi bitmask region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the memory region that
+ * provided rpi via a bitmask.
+ **/
+int
+lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
+{
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_hba *phba = ndlp->phba;
+	int rc;
+
+	/* The port is notified of the header region via a mailbox command. */
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	/* Post all rpi memory regions to the port. */
+	lpfc_resume_rpi(mboxq, ndlp);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2010 Resume RPI Mailbox failed "
+				"status %d, mbxStatus x%x\n", rc,
+				bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+		mempool_free(mboxq, phba->mbox_mem_pool);
+		return -EIO;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_sli4_init_vpi - Initialize a vpi with the port
+ * @phba: pointer to lpfc hba data structure.
+ * @vpi: vpi value to activate with the port.
+ *
+ * This routine is invoked to activate a vpi with the
+ * port when the host intends to use vports with a
+ * nonzero vpi.
+ *
+ * Returns:
+ *    0 success
+ *    -Evalue otherwise
+ **/
+int
+lpfc_sli4_init_vpi(struct lpfc_hba *phba, uint16_t vpi)
+{
+	LPFC_MBOXQ_t *mboxq;
+	int rc = 0;
+	uint32_t mbox_tmo;
+
+	if (vpi == 0)
+		return -EINVAL;
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+	lpfc_init_vpi(mboxq, vpi);
+	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_INIT_VPI);
+	rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2022 INIT VPI Mailbox failed "
+				"status %d, mbxStatus x%x\n", rc,
+				bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+		rc = -EIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_mbx_cmpl_add_fcf_record - add fcf mbox completion handler.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This routine is invoked to manually add a single FCF record. The caller
+ * must pass a completely initialized FCF_Record.  This routine takes
+ * care of the nonembedded mailbox operations.
+ **/
+static void
+lpfc_mbx_cmpl_add_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	void *virt_addr;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint32_t shdr_status, shdr_add_status;
+
+	virt_addr = mboxq->sge_array->addr[0];
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) virt_addr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+
+	if ((shdr_status || shdr_add_status) &&
+		(shdr_status != STATUS_FCF_IN_USE))
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2558 ADD_FCF_RECORD mailbox failed with "
+			"status x%x add_status x%x\n",
+			shdr_status, shdr_add_status);
+
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+}
+
+/**
+ * lpfc_sli4_add_fcf_record - Manually add an FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record:  pointer to the initialized fcf record to add.
+ *
+ * This routine is invoked to manually add a single FCF record. The caller
+ * must pass a completely initialized FCF_Record.  This routine takes
+ * care of the nonembedded mailbox operations.
+ **/
+int
+lpfc_sli4_add_fcf_record(struct lpfc_hba *phba, struct fcf_record *fcf_record)
+{
+	int rc = 0;
+	LPFC_MBOXQ_t *mboxq;
+	uint8_t *bytep;
+	void *virt_addr;
+	dma_addr_t phys_addr;
+	struct lpfc_mbx_sge sge;
+	uint32_t alloc_len, req_len;
+	uint32_t fcfindex;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2009 Failed to allocate mbox for ADD_FCF cmd\n");
+		return -ENOMEM;
+	}
+
+	req_len = sizeof(struct fcf_record) + sizeof(union lpfc_sli4_cfg_shdr) +
+		  sizeof(uint32_t);
+
+	/* Allocate DMA memory and set up the non-embedded mailbox command */
+	alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+				     LPFC_MBOX_OPCODE_FCOE_ADD_FCF,
+				     req_len, LPFC_SLI4_MBX_NEMBED);
+	if (alloc_len < req_len) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2523 Allocated DMA memory size (x%x) is "
+			"less than the requested DMA memory "
+			"size (x%x)\n", alloc_len, req_len);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Get the first SGE entry from the non-embedded DMA memory.  This
+	 * routine only uses a single SGE.
+	 */
+	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+	if (unlikely(!mboxq->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2526 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+	virt_addr = mboxq->sge_array->addr[0];
+	/*
+	 * Configure the FCF record for FCFI 0.  This is the driver's
+	 * hardcoded default and gets used in nonFIP mode.
+	 */
+	fcfindex = bf_get(lpfc_fcf_record_fcf_index, fcf_record);
+	bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+	lpfc_sli_pcimem_bcopy(&fcfindex, bytep, sizeof(uint32_t));
+
+	/*
+	 * Copy the fcf_index and the FCF Record Data. The data starts after
+	 * the FCoE header plus word10. The data copy needs to be endian
+	 * correct.
+	 */
+	bytep += sizeof(uint32_t);
+	lpfc_sli_pcimem_bcopy(fcf_record, bytep, sizeof(struct fcf_record));
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_add_fcf_record;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2515 ADD_FCF_RECORD mailbox failed with "
+			"status 0x%x\n", rc);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		rc = -EIO;
+	} else
+		rc = 0;
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_build_dflt_fcf_record - Build the driver's default FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record:  pointer to the fcf record to write the default data.
+ * @fcf_index: FCF table entry index.
+ *
+ * This routine is invoked to build the driver's default FCF record.  The
+ * values used are hardcoded.  This routine handles memory initialization.
+ *
+ **/
+void
+lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *phba,
+				struct fcf_record *fcf_record,
+				uint16_t fcf_index)
+{
+	memset(fcf_record, 0, sizeof(struct fcf_record));
+	fcf_record->max_rcv_size = LPFC_FCOE_MAX_RCV_SIZE;
+	fcf_record->fka_adv_period = LPFC_FCOE_FKA_ADV_PER;
+	fcf_record->fip_priority = LPFC_FCOE_FIP_PRIORITY;
+	bf_set(lpfc_fcf_record_mac_0, fcf_record, phba->fc_map[0]);
+	bf_set(lpfc_fcf_record_mac_1, fcf_record, phba->fc_map[1]);
+	bf_set(lpfc_fcf_record_mac_2, fcf_record, phba->fc_map[2]);
+	bf_set(lpfc_fcf_record_mac_3, fcf_record, LPFC_FCOE_FCF_MAC3);
+	bf_set(lpfc_fcf_record_mac_4, fcf_record, LPFC_FCOE_FCF_MAC4);
+	bf_set(lpfc_fcf_record_mac_5, fcf_record, LPFC_FCOE_FCF_MAC5);
+	bf_set(lpfc_fcf_record_fc_map_0, fcf_record, phba->fc_map[0]);
+	bf_set(lpfc_fcf_record_fc_map_1, fcf_record, phba->fc_map[1]);
+	bf_set(lpfc_fcf_record_fc_map_2, fcf_record, phba->fc_map[2]);
+	bf_set(lpfc_fcf_record_fcf_valid, fcf_record, 1);
+	bf_set(lpfc_fcf_record_fcf_index, fcf_record, fcf_index);
+	bf_set(lpfc_fcf_record_mac_addr_prov, fcf_record,
+		LPFC_FCF_FPMA | LPFC_FCF_SPMA);
+	/* Set the VLAN bit map */
+	if (phba->valid_vlan) {
+		fcf_record->vlan_bitmap[phba->vlan_id / 8]
+			= 1 << (phba->vlan_id % 8);
+	}
+}
+
+/**
+ * lpfc_sli4_read_fcf_record - Read the driver's default FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: FCF table entry offset.
+ *
+ * This routine is invoked to read up to @fcf_num of FCF record from the
+ * device starting with the given @fcf_index.
+ **/
+int
+lpfc_sli4_read_fcf_record(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+	int rc = 0, error;
+	LPFC_MBOXQ_t *mboxq;
+	void *virt_addr;
+	dma_addr_t phys_addr;
+	uint8_t *bytep;
+	struct lpfc_mbx_sge sge;
+	uint32_t alloc_len, req_len;
+	struct lpfc_mbx_read_fcf_tbl *read_fcf;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2000 Failed to allocate mbox for "
+				"READ_FCF cmd\n");
+		return -ENOMEM;
+	}
+
+	req_len = sizeof(struct fcf_record) +
+		  sizeof(union lpfc_sli4_cfg_shdr) + 2 * sizeof(uint32_t);
+
+	/* Set up READ_FCF SLI4_CONFIG mailbox-ioctl command */
+	alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE, req_len,
+			 LPFC_SLI4_MBX_NEMBED);
+
+	if (alloc_len < req_len) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0291 Allocated DMA memory size (x%x) is "
+				"less than the requested DMA memory "
+				"size (x%x)\n", alloc_len, req_len);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+
+	/* Get the first SGE entry from the non-embedded DMA memory. This
+	 * routine only uses a single SGE.
+	 */
+	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+	if (unlikely(!mboxq->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2527 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+	virt_addr = mboxq->sge_array->addr[0];
+	read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
+
+	/* Set up command fields */
+	bf_set(lpfc_mbx_read_fcf_tbl_indx, &read_fcf->u.request, fcf_index);
+	/* Perform necessary endian conversion */
+	bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+	lpfc_sli_pcimem_bcopy(bytep, bytep, sizeof(uint32_t));
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_read_fcf_record;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		error = -EIO;
+	} else
+		error = 0;
+	return error;
+}
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 8839386..7d37eb7 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -29,13 +29,23 @@
 	LPFC_CTX_HOST
 } lpfc_ctx_cmd;
 
+/* This structure is used to carry the needed response IOCB states */
+struct lpfc_sli4_rspiocb_info {
+	uint8_t hw_status;
+	uint8_t bfield;
+#define LPFC_XB	0x1
+#define LPFC_PV	0x2
+	uint8_t priority;
+	uint8_t reserved;
+};
+
 /* This structure is used to handle IOCB requests / responses */
 struct lpfc_iocbq {
 	/* lpfc_iocbqs are used in double linked lists */
 	struct list_head list;
 	struct list_head clist;
 	uint16_t iotag;         /* pre-assigned IO tag */
-	uint16_t rsvd1;
+	uint16_t sli4_xritag;   /* pre-assigned XRI, (OXID) tag. */
 
 	IOCB_t iocb;		/* IOCB cmd */
 	uint8_t retry;		/* retry counter for IOCB cmd - if needed */
@@ -65,7 +75,7 @@
 			   struct lpfc_iocbq *);
 	void (*iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
 			   struct lpfc_iocbq *);
-
+	struct lpfc_sli4_rspiocb_info sli4_info;
 };
 
 #define SLI_IOCB_RET_IOCB      1	/* Return IOCB if cmd ring full */
@@ -81,14 +91,18 @@
 typedef struct lpfcMboxq {
 	/* MBOXQs are used in single linked lists */
 	struct list_head list;	/* ptr to next mailbox command */
-	MAILBOX_t mb;		/* Mailbox cmd */
-	struct lpfc_vport *vport;/* virutal port pointer */
+	union {
+		MAILBOX_t mb;		/* Mailbox cmd */
+		struct lpfc_mqe mqe;
+	} u;
+	struct lpfc_vport *vport;/* virtual port pointer */
 	void *context1;		/* caller context information */
 	void *context2;		/* caller context information */
 
 	void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *);
 	uint8_t mbox_flag;
-
+	struct lpfc_mcqe mcqe;
+	struct lpfc_mbx_nembed_sge_virt *sge_array;
 } LPFC_MBOXQ_t;
 
 #define MBX_POLL        1	/* poll mailbox till command done, then
@@ -230,10 +244,11 @@
 
 	/* Additional sli_flags */
 #define LPFC_SLI_MBOX_ACTIVE      0x100	/* HBA mailbox is currently active */
-#define LPFC_SLI2_ACTIVE          0x200	/* SLI2 overlay in firmware is active */
+#define LPFC_SLI_ACTIVE           0x200	/* SLI in firmware is active */
 #define LPFC_PROCESS_LA           0x400	/* Able to process link attention */
 #define LPFC_BLOCK_MGMT_IO        0x800	/* Don't allow mgmt mbx or iocb cmds */
 #define LPFC_MENLO_MAINT          0x1000 /* need for menl fw download */
+#define LPFC_SLI_ASYNC_MBX_BLK    0x2000 /* Async mailbox is blocked */
 
 	struct lpfc_sli_ring ring[LPFC_MAX_RING];
 	int fcp_ring;		/* ring used for FCP initiator commands */
@@ -261,6 +276,8 @@
 
 #define LPFC_MBOX_TMO           30	/* Sec tmo for outstanding mbox
 					   command */
+#define LPFC_MBOX_SLI4_CONFIG_TMO 60	/* Sec tmo for outstanding mbox
+					   command */
 #define LPFC_MBOX_TMO_FLASH_CMD 300     /* Sec tmo for outstanding FLASH write
 					 * or erase cmds. This is especially
 					 * long because of the potential of
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
new file mode 100644
index 0000000..5196b466
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -0,0 +1,467 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for         *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2009 Emulex.  All rights reserved.                *
+ * EMULEX and SLI are trademarks of Emulex.                        *
+ * www.emulex.com                                                  *
+ *                                                                 *
+ * This program is free software; you can redistribute it and/or   *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
+ *******************************************************************/
+
+#define LPFC_ACTIVE_MBOX_WAIT_CNT               100
+#define LPFC_RELEASE_NOTIFICATION_INTERVAL	32
+#define LPFC_GET_QE_REL_INT			32
+#define LPFC_RPI_LOW_WATER_MARK			10
+/* Number of SGL entries can be posted in a 4KB nonembedded mbox command */
+#define LPFC_NEMBED_MBOX_SGL_CNT		254
+
+/* Multi-queue arrangement for fast-path FCP work queues */
+#define LPFC_FN_EQN_MAX       8
+#define LPFC_SP_EQN_DEF       1
+#define LPFC_FP_EQN_DEF       1
+#define LPFC_FP_EQN_MIN       1
+#define LPFC_FP_EQN_MAX       (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF)
+
+#define LPFC_FN_WQN_MAX       32
+#define LPFC_SP_WQN_DEF       1
+#define LPFC_FP_WQN_DEF       4
+#define LPFC_FP_WQN_MIN       1
+#define LPFC_FP_WQN_MAX       (LPFC_FN_WQN_MAX - LPFC_SP_WQN_DEF)
+
+/*
+ * Provide the default FCF Record attributes used by the driver
+ * when nonFIP mode is configured and there is no other default
+ * FCF Record attributes.
+ */
+#define LPFC_FCOE_FCF_DEF_INDEX	0
+#define LPFC_FCOE_FCF_GET_FIRST	0xFFFF
+#define LPFC_FCOE_FCF_NEXT_NONE	0xFFFF
+
+/* First 3 bytes of default FCF MAC is specified by FC_MAP */
+#define LPFC_FCOE_FCF_MAC3	0xFF
+#define LPFC_FCOE_FCF_MAC4	0xFF
+#define LPFC_FCOE_FCF_MAC5	0xFE
+#define LPFC_FCOE_FCF_MAP0	0x0E
+#define LPFC_FCOE_FCF_MAP1	0xFC
+#define LPFC_FCOE_FCF_MAP2	0x00
+#define LPFC_FCOE_MAX_RCV_SIZE	0x5AC
+#define LPFC_FCOE_FKA_ADV_PER	0
+#define LPFC_FCOE_FIP_PRIORITY	0x80
+
+enum lpfc_sli4_queue_type {
+	LPFC_EQ,
+	LPFC_GCQ,
+	LPFC_MCQ,
+	LPFC_WCQ,
+	LPFC_RCQ,
+	LPFC_MQ,
+	LPFC_WQ,
+	LPFC_HRQ,
+	LPFC_DRQ
+};
+
+/* The queue sub-type defines the functional purpose of the queue */
+enum lpfc_sli4_queue_subtype {
+	LPFC_NONE,
+	LPFC_MBOX,
+	LPFC_FCP,
+	LPFC_ELS,
+	LPFC_USOL
+};
+
+union sli4_qe {
+	void *address;
+	struct lpfc_eqe *eqe;
+	struct lpfc_cqe *cqe;
+	struct lpfc_mcqe *mcqe;
+	struct lpfc_wcqe_complete *wcqe_complete;
+	struct lpfc_wcqe_release *wcqe_release;
+	struct sli4_wcqe_xri_aborted *wcqe_xri_aborted;
+	struct lpfc_rcqe_complete *rcqe_complete;
+	struct lpfc_mqe *mqe;
+	union  lpfc_wqe *wqe;
+	struct lpfc_rqe *rqe;
+};
+
+struct lpfc_queue {
+	struct list_head list;
+	enum lpfc_sli4_queue_type type;
+	enum lpfc_sli4_queue_subtype subtype;
+	struct lpfc_hba *phba;
+	struct list_head child_list;
+	uint32_t entry_count;	/* Number of entries to support on the queue */
+	uint32_t entry_size;	/* Size of each queue entry. */
+	uint32_t queue_id;	/* Queue ID assigned by the hardware */
+	struct list_head page_list;
+	uint32_t page_count;	/* Number of pages allocated for this queue */
+
+	uint32_t host_index;	/* The host's index for putting or getting */
+	uint32_t hba_index;	/* The last known hba index for get or put */
+	union sli4_qe qe[1];	/* array to index entries (must be last) */
+};
+
+struct lpfc_cq_event {
+	struct list_head list;
+	union {
+		struct lpfc_mcqe		mcqe_cmpl;
+		struct lpfc_acqe_link		acqe_link;
+		struct lpfc_acqe_fcoe		acqe_fcoe;
+		struct lpfc_acqe_dcbx		acqe_dcbx;
+		struct lpfc_rcqe		rcqe_cmpl;
+		struct sli4_wcqe_xri_aborted	wcqe_axri;
+	} cqe;
+};
+
+struct lpfc_sli4_link {
+	uint8_t speed;
+	uint8_t duplex;
+	uint8_t status;
+	uint8_t physical;
+	uint8_t fault;
+};
+
+struct lpfc_fcf {
+	uint8_t	 fabric_name[8];
+	uint8_t  mac_addr[6];
+	uint16_t fcf_indx;
+	uint16_t fcfi;
+	uint32_t fcf_flag;
+#define FCF_AVAILABLE	0x01 /* FCF available for discovery */
+#define FCF_REGISTERED	0x02 /* FCF registered with FW */
+#define FCF_DISCOVERED	0x04 /* FCF discovery started  */
+#define FCF_BOOT_ENABLE 0x08 /* Boot bios use this FCF */
+#define FCF_IN_USE	0x10 /* Atleast one discovery completed */
+#define FCF_VALID_VLAN	0x20 /* Use the vlan id specified */
+	uint32_t priority;
+	uint32_t addr_mode;
+	uint16_t vlan_id;
+};
+
+#define LPFC_REGION23_SIGNATURE "RG23"
+#define LPFC_REGION23_VERSION	1
+#define LPFC_REGION23_LAST_REC  0xff
+struct lpfc_fip_param_hdr {
+	uint8_t type;
+#define FCOE_PARAM_TYPE		0xA0
+	uint8_t length;
+#define FCOE_PARAM_LENGTH	2
+	uint8_t parm_version;
+#define FIPP_VERSION		0x01
+	uint8_t parm_flags;
+#define	lpfc_fip_param_hdr_fipp_mode_SHIFT	6
+#define	lpfc_fip_param_hdr_fipp_mode_MASK	0x3
+#define lpfc_fip_param_hdr_fipp_mode_WORD	parm_flags
+#define	FIPP_MODE_ON				0x2
+#define	FIPP_MODE_OFF				0x0
+#define FIPP_VLAN_VALID				0x1
+};
+
+struct lpfc_fcoe_params {
+	uint8_t fc_map[3];
+	uint8_t reserved1;
+	uint16_t vlan_tag;
+	uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_hdr {
+	uint8_t type;
+#define FCOE_CONN_TBL_TYPE		0xA1
+	uint8_t length;   /* words */
+	uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_rec {
+	uint16_t flags;
+#define	FCFCNCT_VALID		0x0001
+#define	FCFCNCT_BOOT		0x0002
+#define	FCFCNCT_PRIMARY		0x0004   /* if not set, Secondary */
+#define	FCFCNCT_FBNM_VALID	0x0008
+#define	FCFCNCT_SWNM_VALID	0x0010
+#define	FCFCNCT_VLAN_VALID	0x0020
+#define	FCFCNCT_AM_VALID	0x0040
+#define	FCFCNCT_AM_PREFERRED	0x0080   /* if not set, AM Required */
+#define	FCFCNCT_AM_SPMA		0x0100	 /* if not set, FPMA */
+
+	uint16_t vlan_tag;
+	uint8_t fabric_name[8];
+	uint8_t switch_name[8];
+};
+
+struct lpfc_fcf_conn_entry {
+	struct list_head list;
+	struct lpfc_fcf_conn_rec conn_rec;
+};
+
+/*
+ * Define the host's bootstrap mailbox.  This structure contains
+ * the member attributes needed to create, use, and destroy the
+ * bootstrap mailbox region.
+ *
+ * The macro definitions for the bmbx data structure are defined
+ * in lpfc_hw4.h with the register definition.
+ */
+struct lpfc_bmbx {
+	struct lpfc_dmabuf *dmabuf;
+	struct dma_address dma_address;
+	void *avirt;
+	dma_addr_t aphys;
+	uint32_t bmbx_size;
+};
+
+#define LPFC_EQE_SIZE LPFC_EQE_SIZE_4
+
+#define LPFC_EQE_SIZE_4B 	4
+#define LPFC_EQE_SIZE_16B	16
+#define LPFC_CQE_SIZE		16
+#define LPFC_WQE_SIZE		64
+#define LPFC_MQE_SIZE		256
+#define LPFC_RQE_SIZE		8
+
+#define LPFC_EQE_DEF_COUNT	1024
+#define LPFC_CQE_DEF_COUNT      256
+#define LPFC_WQE_DEF_COUNT      64
+#define LPFC_MQE_DEF_COUNT      16
+#define LPFC_RQE_DEF_COUNT	512
+
+#define LPFC_QUEUE_NOARM	false
+#define LPFC_QUEUE_REARM	true
+
+
+/*
+ * SLI4 CT field defines
+ */
+#define SLI4_CT_RPI 0
+#define SLI4_CT_VPI 1
+#define SLI4_CT_VFI 2
+#define SLI4_CT_FCFI 3
+
+#define LPFC_SLI4_MAX_SEGMENT_SIZE 0x10000
+
+/*
+ * SLI4 specific data structures
+ */
+struct lpfc_max_cfg_param {
+	uint16_t max_xri;
+	uint16_t xri_base;
+	uint16_t xri_used;
+	uint16_t max_rpi;
+	uint16_t rpi_base;
+	uint16_t rpi_used;
+	uint16_t max_vpi;
+	uint16_t vpi_base;
+	uint16_t vpi_used;
+	uint16_t max_vfi;
+	uint16_t vfi_base;
+	uint16_t vfi_used;
+	uint16_t max_fcfi;
+	uint16_t fcfi_base;
+	uint16_t fcfi_used;
+	uint16_t max_eq;
+	uint16_t max_rq;
+	uint16_t max_cq;
+	uint16_t max_wq;
+};
+
+struct lpfc_hba;
+/* SLI4 HBA multi-fcp queue handler struct */
+struct lpfc_fcp_eq_hdl {
+	uint32_t idx;
+	struct lpfc_hba *phba;
+};
+
+/* SLI4 HBA data structure entries */
+struct lpfc_sli4_hba {
+	void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
+					     PCI BAR0, config space registers */
+	void __iomem *ctrl_regs_memmap_p; /* Kernel memory mapped address for
+					     PCI BAR1, control registers */
+	void __iomem *drbl_regs_memmap_p; /* Kernel memory mapped address for
+					     PCI BAR2, doorbell registers */
+	/* BAR0 PCI config space register memory map */
+	void __iomem *UERRLOregaddr; /* Address to UERR_STATUS_LO register */
+	void __iomem *UERRHIregaddr; /* Address to UERR_STATUS_HI register */
+	void __iomem *ONLINE0regaddr; /* Address to components of internal UE */
+	void __iomem *ONLINE1regaddr; /* Address to components of internal UE */
+#define LPFC_ONLINE_NERR	0xFFFFFFFF
+	void __iomem *SCRATCHPADregaddr; /* Address to scratchpad register */
+	/* BAR1 FCoE function CSR register memory map */
+	void __iomem *STAregaddr;    /* Address to HST_STATE register */
+	void __iomem *ISRregaddr;    /* Address to HST_ISR register */
+	void __iomem *IMRregaddr;    /* Address to HST_IMR register */
+	void __iomem *ISCRregaddr;   /* Address to HST_ISCR register */
+	/* BAR2 VF-0 doorbell register memory map */
+	void __iomem *RQDBregaddr;   /* Address to RQ_DOORBELL register */
+	void __iomem *WQDBregaddr;   /* Address to WQ_DOORBELL register */
+	void __iomem *EQCQDBregaddr; /* Address to EQCQ_DOORBELL register */
+	void __iomem *MQDBregaddr;   /* Address to MQ_DOORBELL register */
+	void __iomem *BMBXregaddr;   /* Address to BootStrap MBX register */
+
+	struct msix_entry *msix_entries;
+	uint32_t cfg_eqn;
+	struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */
+	/* Pointers to the constructed SLI4 queues */
+	struct lpfc_queue **fp_eq; /* Fast-path event queue */
+	struct lpfc_queue *sp_eq;  /* Slow-path event queue */
+	struct lpfc_queue **fcp_wq;/* Fast-path FCP work queue */
+	struct lpfc_queue *mbx_wq; /* Slow-path MBOX work queue */
+	struct lpfc_queue *els_wq; /* Slow-path ELS work queue */
+	struct lpfc_queue *hdr_rq; /* Slow-path Header Receive queue */
+	struct lpfc_queue *dat_rq; /* Slow-path Data Receive queue */
+	struct lpfc_queue **fcp_cq;/* Fast-path FCP compl queue */
+	struct lpfc_queue *mbx_cq; /* Slow-path mailbox complete queue */
+	struct lpfc_queue *els_cq; /* Slow-path ELS response complete queue */
+	struct lpfc_queue *rxq_cq; /* Slow-path unsolicited complete queue */
+
+	/* Setup information for various queue parameters */
+	int eq_esize;
+	int eq_ecount;
+	int cq_esize;
+	int cq_ecount;
+	int wq_esize;
+	int wq_ecount;
+	int mq_esize;
+	int mq_ecount;
+	int rq_esize;
+	int rq_ecount;
+#define LPFC_SP_EQ_MAX_INTR_SEC         10000
+#define LPFC_FP_EQ_MAX_INTR_SEC         10000
+
+	uint32_t intr_enable;
+	struct lpfc_bmbx bmbx;
+	struct lpfc_max_cfg_param max_cfg_param;
+	uint16_t next_xri; /* last_xri - max_cfg_param.xri_base = used */
+	uint16_t next_rpi;
+	uint16_t scsi_xri_max;
+	uint16_t scsi_xri_cnt;
+	struct list_head lpfc_free_sgl_list;
+	struct list_head lpfc_sgl_list;
+	struct lpfc_sglq **lpfc_els_sgl_array;
+	struct list_head lpfc_abts_els_sgl_list;
+	struct lpfc_scsi_buf **lpfc_scsi_psb_array;
+	struct list_head lpfc_abts_scsi_buf_list;
+	uint32_t total_sglq_bufs;
+	struct lpfc_sglq **lpfc_sglq_active_list;
+	struct list_head lpfc_rpi_hdr_list;
+	unsigned long *rpi_bmask;
+	uint16_t rpi_count;
+	struct lpfc_sli4_flags sli4_flags;
+	struct list_head sp_rspiocb_work_queue;
+	struct list_head sp_cqe_event_pool;
+	struct list_head sp_asynce_work_queue;
+	struct list_head sp_fcp_xri_aborted_work_queue;
+	struct list_head sp_els_xri_aborted_work_queue;
+	struct list_head sp_unsol_work_queue;
+	struct lpfc_sli4_link link_state;
+	spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */
+	spinlock_t abts_sgl_list_lock; /* list of aborted els IOs */
+};
+
+enum lpfc_sge_type {
+	GEN_BUFF_TYPE,
+	SCSI_BUFF_TYPE
+};
+
+struct lpfc_sglq {
+	/* lpfc_sglqs are used in double linked lists */
+	struct list_head list;
+	struct list_head clist;
+	enum lpfc_sge_type buff_type; /* is this a scsi sgl */
+	uint16_t iotag;         /* pre-assigned IO tag */
+	uint16_t sli4_xritag;   /* pre-assigned XRI, (OXID) tag. */
+	struct sli4_sge *sgl;	/* pre-assigned SGL */
+	void *virt;		/* virtual address. */
+	dma_addr_t phys;	/* physical address */
+};
+
+struct lpfc_rpi_hdr {
+	struct list_head list;
+	uint32_t len;
+	struct lpfc_dmabuf *dmabuf;
+	uint32_t page_count;
+	uint32_t start_rpi;
+};
+
+/*
+ * SLI4 specific function prototypes
+ */
+int lpfc_pci_function_reset(struct lpfc_hba *);
+int lpfc_sli4_hba_setup(struct lpfc_hba *);
+int lpfc_sli4_hba_down(struct lpfc_hba *);
+int lpfc_sli4_config(struct lpfc_hba *, struct lpfcMboxq *, uint8_t,
+		     uint8_t, uint32_t, bool);
+void lpfc_sli4_mbox_cmd_free(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_sli4_mbx_sge_set(struct lpfcMboxq *, uint32_t, dma_addr_t, uint32_t);
+void lpfc_sli4_mbx_sge_get(struct lpfcMboxq *, uint32_t,
+			   struct lpfc_mbx_sge *);
+
+void lpfc_sli4_hba_reset(struct lpfc_hba *);
+struct lpfc_queue *lpfc_sli4_queue_alloc(struct lpfc_hba *, uint32_t,
+			uint32_t);
+void lpfc_sli4_queue_free(struct lpfc_queue *);
+uint32_t lpfc_eq_create(struct lpfc_hba *, struct lpfc_queue *, uint16_t);
+uint32_t lpfc_cq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, uint32_t, uint32_t);
+uint32_t lpfc_mq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, uint32_t);
+uint32_t lpfc_wq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, uint32_t);
+uint32_t lpfc_rq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, struct lpfc_queue *, uint32_t);
+uint32_t lpfc_eq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_cq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_mq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_wq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_rq_destroy(struct lpfc_hba *, struct lpfc_queue *,
+			 struct lpfc_queue *);
+int lpfc_sli4_queue_setup(struct lpfc_hba *);
+void lpfc_sli4_queue_unset(struct lpfc_hba *);
+int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t);
+int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
+int lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *);
+uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
+int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
+int lpfc_sli4_post_sgl_list(struct lpfc_hba *phba);
+int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int);
+struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+void lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+int lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_post_rpi_hdr(struct lpfc_hba *, struct lpfc_rpi_hdr *);
+int lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *);
+struct lpfc_rpi_hdr *lpfc_sli4_create_rpi_hdr(struct lpfc_hba *);
+void lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_alloc_rpi(struct lpfc_hba *);
+void lpfc_sli4_free_rpi(struct lpfc_hba *, int);
+void lpfc_sli4_remove_rpis(struct lpfc_hba *);
+void lpfc_sli4_async_event_proc(struct lpfc_hba *);
+int lpfc_sli4_resume_rpi(struct lpfc_nodelist *);
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *,
+			       struct sli4_wcqe_xri_aborted *);
+void lpfc_sli4_els_xri_aborted(struct lpfc_hba *,
+			       struct sli4_wcqe_xri_aborted *);
+int lpfc_sli4_brdreset(struct lpfc_hba *);
+int lpfc_sli4_add_fcf_record(struct lpfc_hba *, struct fcf_record *);
+void lpfc_sli_remove_dflt_fcf(struct lpfc_hba *);
+int lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *);
+int lpfc_sli4_init_vpi(struct lpfc_hba *, uint16_t);
+uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
+uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
+void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
+int lpfc_sli4_read_fcf_record(struct lpfc_hba *, uint16_t);
+void lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_sli4_post_status_check(struct lpfc_hba *);
+uint8_t lpfc_sli4_mbox_opcode_get(struct lpfc_hba *, struct lpfcMboxq *);
+
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index e599519..6b8a148 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.1"
+#define LPFC_DRIVER_VERSION "8.3.2"
 
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 917ad56..a6313ee 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -32,8 +32,10 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -89,6 +91,8 @@
 		vpi = 0;
 	else
 		set_bit(vpi, phba->vpi_bmask);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->sli4_hba.max_cfg_param.vpi_used++;
 	spin_unlock_irq(&phba->hbalock);
 	return vpi;
 }
@@ -96,8 +100,12 @@
 static void
 lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
 {
+	if (vpi == 0)
+		return;
 	spin_lock_irq(&phba->hbalock);
 	clear_bit(vpi, phba->vpi_bmask);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->sli4_hba.max_cfg_param.vpi_used--;
 	spin_unlock_irq(&phba->hbalock);
 }
 
@@ -113,7 +121,7 @@
 	if (!pmb) {
 		return -ENOMEM;
 	}
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 
 	lpfc_read_sparam(phba, pmb, vport->vpi);
 	/*
@@ -243,23 +251,22 @@
 		    (vport->fc_flag & wait_flags)  ||
 		    ((vport->port_state > LPFC_VPORT_FAILED) &&
 		     (vport->port_state < LPFC_VPORT_READY))) {
-			lpfc_printf_log(phba, KERN_INFO, LOG_VPORT,
+			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
 					"1833 Vport discovery quiesce Wait:"
-					" vpi x%x state x%x fc_flags x%x"
+					" state x%x fc_flags x%x"
 					" num_nodes x%x, waiting 1000 msecs"
 					" total wait msecs x%x\n",
-					vport->vpi, vport->port_state,
-					vport->fc_flag, vport->num_disc_nodes,
+					vport->port_state, vport->fc_flag,
+					vport->num_disc_nodes,
 					jiffies_to_msecs(jiffies - start_time));
 			msleep(1000);
 		} else {
 			/* Base case.  Wait variants satisfied.  Break out */
-			lpfc_printf_log(phba, KERN_INFO, LOG_VPORT,
+			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
 					 "1834 Vport discovery quiesced:"
-					 " vpi x%x state x%x fc_flags x%x"
+					 " state x%x fc_flags x%x"
 					 " wait msecs x%x\n",
-					 vport->vpi, vport->port_state,
-					 vport->fc_flag,
+					 vport->port_state, vport->fc_flag,
 					 jiffies_to_msecs(jiffies
 						- start_time));
 			break;
@@ -267,12 +274,10 @@
 	}
 
 	if (time_after(jiffies, wait_time_max))
-		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 				"1835 Vport discovery quiesce failed:"
-				" vpi x%x state x%x fc_flags x%x"
-				" wait msecs x%x\n",
-				vport->vpi, vport->port_state,
-				vport->fc_flag,
+				" state x%x fc_flags x%x wait msecs x%x\n",
+				vport->port_state, vport->fc_flag,
 				jiffies_to_msecs(jiffies - start_time));
 }
 
@@ -308,6 +313,21 @@
 		goto error_out;
 	}
 
+	/*
+	 * In SLI4, the vpi must be activated before it can be used
+	 * by the port.
+	 */
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rc = lpfc_sli4_init_vpi(phba, vpi);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+					"1838 Failed to INIT_VPI on vpi %d "
+					"status %d\n", vpi, rc);
+			rc = VPORT_NORESOURCES;
+			lpfc_free_vpi(phba, vpi);
+			goto error_out;
+		}
+	}
 
 	/* Assign an unused board number */
 	if ((instance = lpfc_get_instance()) < 0) {
@@ -535,6 +555,16 @@
 				 "physical host\n");
 		return VPORT_ERROR;
 	}
+
+	/* If the vport is a static vport fail the deletion. */
+	if ((vport->vport_flag & STATIC_VPORT) &&
+		!(phba->pport->load_flag & FC_UNLOADING)) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+				 "1837 vport_delete failed: Cannot delete "
+				 "static vport.\n");
+		return VPORT_ERROR;
+	}
+
 	/*
 	 * If we are not unloading the driver then prevent the vport_delete
 	 * from happening until after this vport's discovery is finished.
@@ -710,7 +740,7 @@
 	struct lpfc_vport *port_iterator;
 	struct lpfc_vport **vports;
 	int index = 0;
-	vports = kzalloc((phba->max_vpi + 1) * sizeof(struct lpfc_vport *),
+	vports = kzalloc((phba->max_vports + 1) * sizeof(struct lpfc_vport *),
 			 GFP_KERNEL);
 	if (vports == NULL)
 		return NULL;
@@ -734,7 +764,7 @@
 	int i;
 	if (vports == NULL)
 		return;
-	for (i=0; vports[i] != NULL && i <= phba->max_vpi; i++)
+	for (i = 0; vports[i] != NULL && i <= phba->max_vports; i++)
 		scsi_host_put(lpfc_shost_from_vport(vports[i]));
 	kfree(vports);
 }
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 36b1d10..286c185 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -61,6 +61,7 @@
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_transport_sas.h>
 #include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
 
 #include "mpt2sas_debug.h"
 
@@ -68,10 +69,10 @@
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
 #define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"01.100.02.00"
+#define MPT2SAS_DRIVER_VERSION		"01.100.03.00"
 #define MPT2SAS_MAJOR_VERSION		01
 #define MPT2SAS_MINOR_VERSION		100
-#define MPT2SAS_BUILD_VERSION		02
+#define MPT2SAS_BUILD_VERSION		03
 #define MPT2SAS_RELEASE_VERSION		00
 
 /*
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index ba6ab17..14e473d 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -473,7 +473,7 @@
 }
 
 /**
- * _ctl_do_task_abort - assign an active smid to the abort_task
+ * _ctl_set_task_mid - assign an active smid to tm request
  * @ioc: per adapter object
  * @karg - (struct mpt2_ioctl_command)
  * @tm_request - pointer to mf from user space
@@ -482,7 +482,7 @@
  * during failure, the reply frame is filled.
  */
 static int
-_ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
+_ctl_set_task_mid(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
     Mpi2SCSITaskManagementRequest_t *tm_request)
 {
 	u8 found = 0;
@@ -494,6 +494,14 @@
 	Mpi2SCSITaskManagementReply_t *tm_reply;
 	u32 sz;
 	u32 lun;
+	char *desc = NULL;
+
+	if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
+		desc = "abort_task";
+	else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
+		desc = "query_task";
+	else
+		return 0;
 
 	lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
 
@@ -517,13 +525,13 @@
 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 
 	if (!found) {
-		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: "
-		    "DevHandle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
-		    tm_request->DevHandle, lun));
+		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+		    "handle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
+		    desc, tm_request->DevHandle, lun));
 		tm_reply = ioc->ctl_cmds.reply;
 		tm_reply->DevHandle = tm_request->DevHandle;
 		tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
-		tm_reply->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK;
+		tm_reply->TaskType = tm_request->TaskType;
 		tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
 		tm_reply->VP_ID = tm_request->VP_ID;
 		tm_reply->VF_ID = tm_request->VF_ID;
@@ -535,9 +543,9 @@
 		return 1;
 	}
 
-	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: "
-	    "DevHandle(0x%04x), lun(%d), smid(%d)\n", ioc->name,
-	    tm_request->DevHandle, lun, tm_request->TaskMID));
+	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+	    "handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name,
+	    desc, tm_request->DevHandle, lun, tm_request->TaskMID));
 	return 0;
 }
 
@@ -739,8 +747,10 @@
 		    (Mpi2SCSITaskManagementRequest_t *)mpi_request;
 
 		if (tm_request->TaskType ==
-		    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
-			if (_ctl_do_task_abort(ioc, &karg, tm_request)) {
+		    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
+		    tm_request->TaskType ==
+		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
+			if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
 				mpt2sas_base_free_smid(ioc, smid);
 				goto out;
 			}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index e3a7967..2a01a5f 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -197,12 +197,12 @@
 MODULE_DEVICE_TABLE(pci, scsih_pci_table);
 
 /**
- * scsih_set_debug_level - global setting of ioc->logging_level.
+ * _scsih_set_debug_level - global setting of ioc->logging_level.
  *
  * Note: The logging levels are defined in mpt2sas_debug.h.
  */
 static int
-scsih_set_debug_level(const char *val, struct kernel_param *kp)
+_scsih_set_debug_level(const char *val, struct kernel_param *kp)
 {
 	int ret = param_set_int(val, kp);
 	struct MPT2SAS_ADAPTER *ioc;
@@ -215,7 +215,7 @@
 		ioc->logging_level = logging_level;
 	return 0;
 }
-module_param_call(logging_level, scsih_set_debug_level, param_get_int,
+module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
     &logging_level, 0644);
 
 /**
@@ -884,6 +884,41 @@
 }
 
 /**
+ * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun
+ * @ioc: per adapter object
+ * @id: target id
+ * @lun: lun number
+ * @channel: channel
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * This will search for a matching channel:id:lun in the scsi_lookup array,
+ * returning 1 if found.
+ */
+static u8
+_scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id,
+    unsigned int lun, int channel)
+{
+	u8 found;
+	unsigned long	flags;
+	int i;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	found = 0;
+	for (i = 0 ; i < ioc->request_depth; i++) {
+		if (ioc->scsi_lookup[i].scmd &&
+		    (ioc->scsi_lookup[i].scmd->device->id == id &&
+		    ioc->scsi_lookup[i].scmd->device->channel == channel &&
+		    ioc->scsi_lookup[i].scmd->device->lun == lun)) {
+			found = 1;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return found;
+}
+
+/**
  * _scsih_get_chain_buffer_dma - obtain block of chains (dma address)
  * @ioc: per adapter object
  * @smid: system request message index
@@ -1047,14 +1082,14 @@
 }
 
 /**
- * scsih_change_queue_depth - setting device queue depth
+ * _scsih_change_queue_depth - setting device queue depth
  * @sdev: scsi device struct
  * @qdepth: requested queue depth
  *
  * Returns queue depth.
  */
 static int
-scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 {
 	struct Scsi_Host *shost = sdev->host;
 	int max_depth;
@@ -1079,14 +1114,14 @@
 }
 
 /**
- * scsih_change_queue_depth - changing device queue tag type
+ * _scsih_change_queue_depth - changing device queue tag type
  * @sdev: scsi device struct
  * @tag_type: requested tag type
  *
  * Returns queue tag type.
  */
 static int
-scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
+_scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
 {
 	if (sdev->tagged_supported) {
 		scsi_set_tag_type(sdev, tag_type);
@@ -1101,14 +1136,14 @@
 }
 
 /**
- * scsih_target_alloc - target add routine
+ * _scsih_target_alloc - target add routine
  * @starget: scsi target struct
  *
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
 static int
-scsih_target_alloc(struct scsi_target *starget)
+_scsih_target_alloc(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1163,13 +1198,13 @@
 }
 
 /**
- * scsih_target_destroy - target destroy routine
+ * _scsih_target_destroy - target destroy routine
  * @starget: scsi target struct
  *
  * Returns nothing.
  */
 static void
-scsih_target_destroy(struct scsi_target *starget)
+_scsih_target_destroy(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1212,14 +1247,14 @@
 }
 
 /**
- * scsih_slave_alloc - device add routine
+ * _scsih_slave_alloc - device add routine
  * @sdev: scsi device struct
  *
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
 static int
-scsih_slave_alloc(struct scsi_device *sdev)
+_scsih_slave_alloc(struct scsi_device *sdev)
 {
 	struct Scsi_Host *shost;
 	struct MPT2SAS_ADAPTER *ioc;
@@ -1273,13 +1308,13 @@
 }
 
 /**
- * scsih_slave_destroy - device destroy routine
+ * _scsih_slave_destroy - device destroy routine
  * @sdev: scsi device struct
  *
  * Returns nothing.
  */
 static void
-scsih_slave_destroy(struct scsi_device *sdev)
+_scsih_slave_destroy(struct scsi_device *sdev)
 {
 	struct MPT2SAS_TARGET *sas_target_priv_data;
 	struct scsi_target *starget;
@@ -1295,13 +1330,13 @@
 }
 
 /**
- * scsih_display_sata_capabilities - sata capabilities
+ * _scsih_display_sata_capabilities - sata capabilities
  * @ioc: per adapter object
  * @sas_device: the sas_device object
  * @sdev: scsi device struct
  */
 static void
-scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
+_scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
     struct _sas_device *sas_device, struct scsi_device *sdev)
 {
 	Mpi2ConfigReply_t mpi_reply;
@@ -1401,14 +1436,14 @@
 }
 
 /**
- * scsih_slave_configure - device configure routine.
+ * _scsih_slave_configure - device configure routine.
  * @sdev: scsi device struct
  *
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
 static int
-scsih_slave_configure(struct scsi_device *sdev)
+_scsih_slave_configure(struct scsi_device *sdev)
 {
 	struct Scsi_Host *shost = sdev->host;
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1489,7 +1524,7 @@
 		    r_level, raid_device->handle,
 		    (unsigned long long)raid_device->wwid,
 		    raid_device->num_pds, ds);
-		scsih_change_queue_depth(sdev, qdepth);
+		_scsih_change_queue_depth(sdev, qdepth);
 		return 0;
 	}
 
@@ -1532,10 +1567,10 @@
 		    sas_device->slot);
 
 		if (!ssp_target)
-			scsih_display_sata_capabilities(ioc, sas_device, sdev);
+			_scsih_display_sata_capabilities(ioc, sas_device, sdev);
 	}
 
-	scsih_change_queue_depth(sdev, qdepth);
+	_scsih_change_queue_depth(sdev, qdepth);
 
 	if (ssp_target)
 		sas_read_port_mode_page(sdev);
@@ -1543,7 +1578,7 @@
 }
 
 /**
- * scsih_bios_param - fetch head, sector, cylinder info for a disk
+ * _scsih_bios_param - fetch head, sector, cylinder info for a disk
  * @sdev: scsi device struct
  * @bdev: pointer to block device context
  * @capacity: device size (in 512 byte sectors)
@@ -1555,7 +1590,7 @@
  * Return nothing.
  */
 static int
-scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+_scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
     sector_t capacity, int params[])
 {
 	int		heads;
@@ -1636,7 +1671,7 @@
 }
 
 /**
- * scsih_tm_done - tm completion routine
+ * _scsih_tm_done - tm completion routine
  * @ioc: per adapter object
  * @smid: system request message index
  * @VF_ID: virtual function id
@@ -1648,7 +1683,7 @@
  * Return nothing.
  */
 static void
-scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+_scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 {
 	MPI2DefaultReply_t *mpi_reply;
 
@@ -1823,13 +1858,13 @@
 }
 
 /**
- * scsih_abort - eh threads main abort routine
+ * _scsih_abort - eh threads main abort routine
  * @sdev: scsi device struct
  *
  * Returns SUCCESS if command aborted else FAILED
  */
 static int
-scsih_abort(struct scsi_cmnd *scmd)
+_scsih_abort(struct scsi_cmnd *scmd)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -1889,15 +1924,86 @@
 	return r;
 }
 
-
 /**
- * scsih_dev_reset - eh threads main device reset routine
+ * _scsih_dev_reset - eh threads main device reset routine
  * @sdev: scsi device struct
  *
  * Returns SUCCESS if command aborted else FAILED
  */
 static int
-scsih_dev_reset(struct scsi_cmnd *scmd)
+_scsih_dev_reset(struct scsi_cmnd *scmd)
+{
+	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT2SAS_DEVICE *sas_device_priv_data;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	u16	handle;
+	int r;
+
+	printk(MPT2SAS_INFO_FMT "attempting device reset! scmd(%p)\n",
+	    ioc->name, scmd);
+	scsi_print_command(scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+		printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n",
+		    ioc->name, scmd);
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* for hidden raid components obtain the volume_handle */
+	handle = 0;
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = _scsih_sas_device_find_by_handle(ioc,
+		   sas_device_priv_data->sas_target->handle);
+		if (sas_device)
+			handle = sas_device->volume_handle;
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	} else
+		handle = sas_device_priv_data->sas_target->handle;
+
+	if (!handle) {
+		scmd->result = DID_RESET << 16;
+		r = FAILED;
+		goto out;
+	}
+
+	mutex_lock(&ioc->tm_cmds.mutex);
+	mpt2sas_scsih_issue_tm(ioc, handle, 0,
+	    MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, scmd->device->lun,
+	    30);
+
+	/*
+	 *  sanity check see whether all commands to this device been
+	 *  completed
+	 */
+	if (_scsih_scsi_lookup_find_by_lun(ioc, scmd->device->id,
+	    scmd->device->lun, scmd->device->channel))
+		r = FAILED;
+	else
+		r = SUCCESS;
+	ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
+	mutex_unlock(&ioc->tm_cmds.mutex);
+
+ out:
+	printk(MPT2SAS_INFO_FMT "device reset: %s scmd(%p)\n",
+	    ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+	return r;
+}
+
+/**
+ * _scsih_target_reset - eh threads main target reset routine
+ * @sdev: scsi device struct
+ *
+ * Returns SUCCESS if command aborted else FAILED
+ */
+static int
+_scsih_target_reset(struct scsi_cmnd *scmd)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -1912,7 +2018,7 @@
 
 	sas_device_priv_data = scmd->device->hostdata;
 	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
-		printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n",
+		printk(MPT2SAS_INFO_FMT "target been deleted! scmd(%p)\n",
 		    ioc->name, scmd);
 		scmd->result = DID_NO_CONNECT << 16;
 		scmd->scsi_done(scmd);
@@ -1962,13 +2068,13 @@
 }
 
 /**
- * scsih_abort - eh threads main host reset routine
+ * _scsih_abort - eh threads main host reset routine
  * @sdev: scsi device struct
  *
  * Returns SUCCESS if command aborted else FAILED
  */
 static int
-scsih_host_reset(struct scsi_cmnd *scmd)
+_scsih_host_reset(struct scsi_cmnd *scmd)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	int r, retval;
@@ -2390,7 +2496,107 @@
 }
 
 /**
- * scsih_qcmd - main scsi request entry point
+ * _scsih_setup_eedp - setup MPI request for EEDP transfer
+ * @scmd: pointer to scsi command object
+ * @mpi_request: pointer to the SCSI_IO reqest message frame
+ *
+ * Supporting protection 1 and 3.
+ *
+ * Returns nothing
+ */
+static void
+_scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request)
+{
+	u16 eedp_flags;
+	unsigned char prot_op = scsi_get_prot_op(scmd);
+	unsigned char prot_type = scsi_get_prot_type(scmd);
+
+	if (prot_type == SCSI_PROT_DIF_TYPE0 ||
+	   prot_type == SCSI_PROT_DIF_TYPE2 ||
+	   prot_op == SCSI_PROT_NORMAL)
+		return;
+
+	if (prot_op ==  SCSI_PROT_READ_STRIP)
+		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP;
+	else if (prot_op ==  SCSI_PROT_WRITE_INSERT)
+		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
+	else
+		return;
+
+	mpi_request->EEDPBlockSize = scmd->device->sector_size;
+
+	switch (prot_type) {
+	case SCSI_PROT_DIF_TYPE1:
+
+		/*
+		* enable ref/guard checking
+		* auto increment ref tag
+		*/
+		mpi_request->EEDPFlags = eedp_flags |
+		    MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+		mpi_request->CDB.EEDP32.PrimaryReferenceTag =
+		    cpu_to_be32(scsi_get_lba(scmd));
+
+		break;
+
+	case SCSI_PROT_DIF_TYPE3:
+
+		/*
+		* enable guard checking
+		*/
+		mpi_request->EEDPFlags = eedp_flags |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+
+		break;
+	}
+}
+
+/**
+ * _scsih_eedp_error_handling - return sense code for EEDP errors
+ * @scmd: pointer to scsi command object
+ * @ioc_status: ioc status
+ *
+ * Returns nothing
+ */
+static void
+_scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
+{
+	u8 ascq;
+	u8 sk;
+	u8 host_byte;
+
+	switch (ioc_status) {
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		ascq = 0x01;
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		ascq = 0x02;
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		ascq = 0x03;
+		break;
+	default:
+		ascq = 0x00;
+		break;
+	}
+
+	if (scmd->sc_data_direction == DMA_TO_DEVICE) {
+		sk = ILLEGAL_REQUEST;
+		host_byte = DID_ABORT;
+	} else {
+		sk = ABORTED_COMMAND;
+		host_byte = DID_OK;
+	}
+
+	scsi_build_sense_buffer(0, scmd->sense_buffer, sk, 0x10, ascq);
+	scmd->result = DRIVER_SENSE << 24 | (host_byte << 16) |
+	    SAM_STAT_CHECK_CONDITION;
+}
+
+/**
+ * _scsih_qcmd - main scsi request entry point
  * @scmd: pointer to scsi command object
  * @done: function pointer to be invoked on completion
  *
@@ -2401,7 +2607,7 @@
  * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
  */
 static int
-scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
+_scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -2470,6 +2676,7 @@
 	}
 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
 	memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
+	_scsih_setup_eedp(scmd, mpi_request);
 	mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
 	if (sas_device_priv_data->sas_target->flags &
 	    MPT_TARGET_FLAGS_RAID_COMPONENT)
@@ -2604,6 +2811,15 @@
 	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
 		desc_ioc_state = "scsi ext terminated";
 		break;
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		desc_ioc_state = "eedp guard error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		desc_ioc_state = "eedp ref tag error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		desc_ioc_state = "eedp app tag error";
+		break;
 	default:
 		desc_ioc_state = "unknown";
 		break;
@@ -2783,7 +2999,7 @@
 }
 
 /**
- * scsih_io_done - scsi request callback
+ * _scsih_io_done - scsi request callback
  * @ioc: per adapter object
  * @smid: system request message index
  * @VF_ID: virtual function id
@@ -2794,7 +3010,7 @@
  * Return nothing.
  */
 static void
-scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+_scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 {
 	Mpi2SCSIIORequest_t *mpi_request;
 	Mpi2SCSIIOReply_t *mpi_reply;
@@ -2939,6 +3155,11 @@
 			scmd->result = DID_RESET << 16;
 		break;
 
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		_scsih_eedp_error_handling(scmd, ioc_status);
+		break;
 	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
 	case MPI2_IOCSTATUS_INVALID_FUNCTION:
 	case MPI2_IOCSTATUS_INVALID_SGL:
@@ -5130,18 +5351,19 @@
 	.module				= THIS_MODULE,
 	.name				= "Fusion MPT SAS Host",
 	.proc_name			= MPT2SAS_DRIVER_NAME,
-	.queuecommand			= scsih_qcmd,
-	.target_alloc			= scsih_target_alloc,
-	.slave_alloc			= scsih_slave_alloc,
-	.slave_configure		= scsih_slave_configure,
-	.target_destroy			= scsih_target_destroy,
-	.slave_destroy			= scsih_slave_destroy,
-	.change_queue_depth 		= scsih_change_queue_depth,
-	.change_queue_type		= scsih_change_queue_type,
-	.eh_abort_handler		= scsih_abort,
-	.eh_device_reset_handler	= scsih_dev_reset,
-	.eh_host_reset_handler		= scsih_host_reset,
-	.bios_param			= scsih_bios_param,
+	.queuecommand			= _scsih_qcmd,
+	.target_alloc			= _scsih_target_alloc,
+	.slave_alloc			= _scsih_slave_alloc,
+	.slave_configure		= _scsih_slave_configure,
+	.target_destroy			= _scsih_target_destroy,
+	.slave_destroy			= _scsih_slave_destroy,
+	.change_queue_depth 		= _scsih_change_queue_depth,
+	.change_queue_type		= _scsih_change_queue_type,
+	.eh_abort_handler		= _scsih_abort,
+	.eh_device_reset_handler	= _scsih_dev_reset,
+	.eh_target_reset_handler	= _scsih_target_reset,
+	.eh_host_reset_handler		= _scsih_host_reset,
+	.bios_param			= _scsih_bios_param,
 	.can_queue			= 1,
 	.this_id			= -1,
 	.sg_tablesize			= MPT2SAS_SG_DEPTH,
@@ -5228,13 +5450,13 @@
 }
 
 /**
- * scsih_remove - detach and remove add host
+ * _scsih_remove - detach and remove add host
  * @pdev: PCI device struct
  *
  * Return nothing.
  */
 static void __devexit
-scsih_remove(struct pci_dev *pdev)
+_scsih_remove(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -5442,14 +5664,14 @@
 }
 
 /**
- * scsih_probe - attach and add scsi host
+ * _scsih_probe - attach and add scsi host
  * @pdev: PCI device struct
  * @id: pci device id
  *
  * Returns 0 success, anything else error.
  */
 static int
-scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+_scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct MPT2SAS_ADAPTER *ioc;
 	struct Scsi_Host *shost;
@@ -5503,6 +5725,9 @@
 		goto out_add_shost_fail;
 	}
 
+	scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
+	    | SHOST_DIF_TYPE3_PROTECTION);
+
 	/* event thread */
 	snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
 	    "fw_event%d", ioc->id);
@@ -5536,14 +5761,14 @@
 
 #ifdef CONFIG_PM
 /**
- * scsih_suspend - power management suspend main entry point
+ * _scsih_suspend - power management suspend main entry point
  * @pdev: PCI device struct
  * @state: PM state change to (usually PCI_D3)
  *
  * Returns 0 success, anything else error.
  */
 static int
-scsih_suspend(struct pci_dev *pdev, pm_message_t state)
+_scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -5564,13 +5789,13 @@
 }
 
 /**
- * scsih_resume - power management resume main entry point
+ * _scsih_resume - power management resume main entry point
  * @pdev: PCI device struct
  *
  * Returns 0 success, anything else error.
  */
 static int
-scsih_resume(struct pci_dev *pdev)
+_scsih_resume(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -5599,22 +5824,22 @@
 static struct pci_driver scsih_driver = {
 	.name		= MPT2SAS_DRIVER_NAME,
 	.id_table	= scsih_pci_table,
-	.probe		= scsih_probe,
-	.remove		= __devexit_p(scsih_remove),
+	.probe		= _scsih_probe,
+	.remove		= __devexit_p(_scsih_remove),
 #ifdef CONFIG_PM
-	.suspend	= scsih_suspend,
-	.resume		= scsih_resume,
+	.suspend	= _scsih_suspend,
+	.resume		= _scsih_resume,
 #endif
 };
 
 
 /**
- * scsih_init - main entry point for this driver.
+ * _scsih_init - main entry point for this driver.
  *
  * Returns 0 success, anything else error.
  */
 static int __init
-scsih_init(void)
+_scsih_init(void)
 {
 	int error;
 
@@ -5630,10 +5855,10 @@
 	mpt2sas_base_initialize_callback_handler();
 
 	 /* queuecommand callback hander */
-	scsi_io_cb_idx = mpt2sas_base_register_callback_handler(scsih_io_done);
+	scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done);
 
 	/* task managment callback handler */
-	tm_cb_idx = mpt2sas_base_register_callback_handler(scsih_tm_done);
+	tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done);
 
 	/* base internal commands callback handler */
 	base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
@@ -5659,12 +5884,12 @@
 }
 
 /**
- * scsih_exit - exit point for this driver (when it is a module).
+ * _scsih_exit - exit point for this driver (when it is a module).
  *
  * Returns 0 success, anything else error.
  */
 static void __exit
-scsih_exit(void)
+_scsih_exit(void)
 {
 	printk(KERN_INFO "mpt2sas version %s unloading\n",
 	    MPT2SAS_DRIVER_VERSION);
@@ -5682,5 +5907,5 @@
 	mpt2sas_ctl_exit();
 }
 
-module_init(scsih_init);
-module_exit(scsih_exit);
+module_init(_scsih_init);
+module_exit(_scsih_exit);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index 5c65da5..686695b 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -264,7 +264,7 @@
 };
 
 /**
- * transport_expander_report_manufacture - obtain SMP report_manufacture
+ * _transport_expander_report_manufacture - obtain SMP report_manufacture
  * @ioc: per adapter object
  * @sas_address: expander sas address
  * @edev: the sas_expander_device object
@@ -274,7 +274,7 @@
  * Returns 0 for success, non-zero for failure.
  */
 static int
-transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
+_transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
     u64 sas_address, struct sas_expander_device *edev)
 {
 	Mpi2SmpPassthroughRequest_t *mpi_request;
@@ -578,7 +578,7 @@
 	    MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
 	    mpt2sas_port->remote_identify.device_type ==
 	    MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER)
-		transport_expander_report_manufacture(ioc,
+		_transport_expander_report_manufacture(ioc,
 		    mpt2sas_port->remote_identify.sas_address,
 		    rphy_to_expander_device(rphy));
 
@@ -852,7 +852,7 @@
 }
 
 /**
- * transport_get_linkerrors -
+ * _transport_get_linkerrors -
  * @phy: The sas phy object
  *
  * Only support sas_host direct attached phys.
@@ -860,7 +860,7 @@
  *
  */
 static int
-transport_get_linkerrors(struct sas_phy *phy)
+_transport_get_linkerrors(struct sas_phy *phy)
 {
 	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
 	struct _sas_phy *mpt2sas_phy;
@@ -903,14 +903,14 @@
 }
 
 /**
- * transport_get_enclosure_identifier -
+ * _transport_get_enclosure_identifier -
  * @phy: The sas phy object
  *
  * Obtain the enclosure logical id for an expander.
  * Returns 0 for success, non-zero for failure.
  */
 static int
-transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
 {
 	struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
 	struct _sas_node *sas_expander;
@@ -929,13 +929,13 @@
 }
 
 /**
- * transport_get_bay_identifier -
+ * _transport_get_bay_identifier -
  * @phy: The sas phy object
  *
  * Returns the slot id for a device that resides inside an enclosure.
  */
 static int
-transport_get_bay_identifier(struct sas_rphy *rphy)
+_transport_get_bay_identifier(struct sas_rphy *rphy)
 {
 	struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
 	struct _sas_device *sas_device;
@@ -953,7 +953,7 @@
 }
 
 /**
- * transport_phy_reset -
+ * _transport_phy_reset -
  * @phy: The sas phy object
  * @hard_reset:
  *
@@ -961,7 +961,7 @@
  * Returns 0 for success, non-zero for failure.
  */
 static int
-transport_phy_reset(struct sas_phy *phy, int hard_reset)
+_transport_phy_reset(struct sas_phy *phy, int hard_reset)
 {
 	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
 	struct _sas_phy *mpt2sas_phy;
@@ -1002,7 +1002,7 @@
 }
 
 /**
- * transport_smp_handler - transport portal for smp passthru
+ * _transport_smp_handler - transport portal for smp passthru
  * @shost: shost object
  * @rphy: sas transport rphy object
  * @req:
@@ -1012,7 +1012,7 @@
  *           smp_rep_general /sys/class/bsg/expander-5:0
  */
 static int
-transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+_transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
     struct request *req)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1200,11 +1200,11 @@
 }
 
 struct sas_function_template mpt2sas_transport_functions = {
-	.get_linkerrors		= transport_get_linkerrors,
-	.get_enclosure_identifier = transport_get_enclosure_identifier,
-	.get_bay_identifier	= transport_get_bay_identifier,
-	.phy_reset		= transport_phy_reset,
-	.smp_handler		= transport_smp_handler,
+	.get_linkerrors		= _transport_get_linkerrors,
+	.get_enclosure_identifier = _transport_get_enclosure_identifier,
+	.get_bay_identifier	= _transport_get_bay_identifier,
+	.phy_reset		= _transport_phy_reset,
+	.smp_handler		= _transport_smp_handler,
 };
 
 struct scsi_transport_template *mpt2sas_transport_template;
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
deleted file mode 100644
index e4acebd..0000000
--- a/drivers/scsi/mvsas.c
+++ /dev/null
@@ -1,3222 +0,0 @@
-/*
-	mvsas.c - Marvell 88SE6440 SAS/SATA support
-
-	Copyright 2007 Red Hat, Inc.
-	Copyright 2008 Marvell. <kewei@marvell.com>
-
-	This program is free software; you can redistribute it and/or
-	modify it under the terms of the GNU General Public License as
-	published by the Free Software Foundation; either version 2,
-	or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty
-	of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-	See the GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public
-	License along with this program; see the file COPYING.	If not,
-	write to the Free Software Foundation, 675 Mass Ave, Cambridge,
-	MA 02139, USA.
-
-	---------------------------------------------------------------
-
-	Random notes:
-	* hardware supports controlling the endian-ness of data
-	  structures.  this permits elimination of all the le32_to_cpu()
-	  and cpu_to_le32() conversions.
-
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/ctype.h>
-#include <scsi/libsas.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/sas_ata.h>
-#include <asm/io.h>
-
-#define DRV_NAME	"mvsas"
-#define DRV_VERSION	"0.5.2"
-#define _MV_DUMP	0
-#define MVS_DISABLE_NVRAM
-#define MVS_DISABLE_MSI
-
-#define mr32(reg)	readl(regs + MVS_##reg)
-#define mw32(reg,val)	writel((val), regs + MVS_##reg)
-#define mw32_f(reg,val)	do {			\
-	writel((val), regs + MVS_##reg);	\
-	readl(regs + MVS_##reg);		\
-	} while (0)
-
-#define MVS_ID_NOT_MAPPED	0x7f
-#define MVS_CHIP_SLOT_SZ	(1U << mvi->chip->slot_width)
-
-/* offset for D2H FIS in the Received FIS List Structure */
-#define SATA_RECEIVED_D2H_FIS(reg_set)	\
-	((void *) mvi->rx_fis + 0x400 + 0x100 * reg_set + 0x40)
-#define SATA_RECEIVED_PIO_FIS(reg_set)	\
-	((void *) mvi->rx_fis + 0x400 + 0x100 * reg_set + 0x20)
-#define UNASSOC_D2H_FIS(id)		\
-	((void *) mvi->rx_fis + 0x100 * id)
-
-#define for_each_phy(__lseq_mask, __mc, __lseq, __rest)			\
-	for ((__mc) = (__lseq_mask), (__lseq) = 0;			\
-					(__mc) != 0 && __rest;		\
-					(++__lseq), (__mc) >>= 1)
-
-/* driver compile-time configuration */
-enum driver_configuration {
-	MVS_TX_RING_SZ		= 1024,	/* TX ring size (12-bit) */
-	MVS_RX_RING_SZ		= 1024, /* RX ring size (12-bit) */
-					/* software requires power-of-2
-					   ring size */
-
-	MVS_SLOTS		= 512,	/* command slots */
-	MVS_SLOT_BUF_SZ		= 8192, /* cmd tbl + IU + status + PRD */
-	MVS_SSP_CMD_SZ		= 64,	/* SSP command table buffer size */
-	MVS_ATA_CMD_SZ		= 96,	/* SATA command table buffer size */
-	MVS_OAF_SZ		= 64,	/* Open address frame buffer size */
-
-	MVS_RX_FIS_COUNT	= 17,	/* Optional rx'd FISs (max 17) */
-
-	MVS_QUEUE_SIZE		= 30,	/* Support Queue depth */
-	MVS_CAN_QUEUE		= MVS_SLOTS - 1,	/* SCSI Queue depth */
-};
-
-/* unchangeable hardware details */
-enum hardware_details {
-	MVS_MAX_PHYS		= 8,	/* max. possible phys */
-	MVS_MAX_PORTS		= 8,	/* max. possible ports */
-	MVS_RX_FISL_SZ		= 0x400 + (MVS_RX_FIS_COUNT * 0x100),
-};
-
-/* peripheral registers (BAR2) */
-enum peripheral_registers {
-	SPI_CTL			= 0x10,	/* EEPROM control */
-	SPI_CMD			= 0x14,	/* EEPROM command */
-	SPI_DATA		= 0x18, /* EEPROM data */
-};
-
-enum peripheral_register_bits {
-	TWSI_RDY		= (1U << 7),	/* EEPROM interface ready */
-	TWSI_RD			= (1U << 4),	/* EEPROM read access */
-
-	SPI_ADDR_MASK		= 0x3ffff,	/* bits 17:0 */
-};
-
-/* enhanced mode registers (BAR4) */
-enum hw_registers {
-	MVS_GBL_CTL		= 0x04,  /* global control */
-	MVS_GBL_INT_STAT	= 0x08,  /* global irq status */
-	MVS_GBL_PI		= 0x0C,  /* ports implemented bitmask */
-	MVS_GBL_PORT_TYPE	= 0xa0,  /* port type */
-
-	MVS_CTL			= 0x100, /* SAS/SATA port configuration */
-	MVS_PCS			= 0x104, /* SAS/SATA port control/status */
-	MVS_CMD_LIST_LO		= 0x108, /* cmd list addr */
-	MVS_CMD_LIST_HI		= 0x10C,
-	MVS_RX_FIS_LO		= 0x110, /* RX FIS list addr */
-	MVS_RX_FIS_HI		= 0x114,
-
-	MVS_TX_CFG		= 0x120, /* TX configuration */
-	MVS_TX_LO		= 0x124, /* TX (delivery) ring addr */
-	MVS_TX_HI		= 0x128,
-
-	MVS_TX_PROD_IDX		= 0x12C, /* TX producer pointer */
-	MVS_TX_CONS_IDX		= 0x130, /* TX consumer pointer (RO) */
-	MVS_RX_CFG		= 0x134, /* RX configuration */
-	MVS_RX_LO		= 0x138, /* RX (completion) ring addr */
-	MVS_RX_HI		= 0x13C,
-	MVS_RX_CONS_IDX		= 0x140, /* RX consumer pointer (RO) */
-
-	MVS_INT_COAL		= 0x148, /* Int coalescing config */
-	MVS_INT_COAL_TMOUT	= 0x14C, /* Int coalescing timeout */
-	MVS_INT_STAT		= 0x150, /* Central int status */
-	MVS_INT_MASK		= 0x154, /* Central int enable */
-	MVS_INT_STAT_SRS	= 0x158, /* SATA register set status */
-	MVS_INT_MASK_SRS	= 0x15C,
-
-					 /* ports 1-3 follow after this */
-	MVS_P0_INT_STAT		= 0x160, /* port0 interrupt status */
-	MVS_P0_INT_MASK		= 0x164, /* port0 interrupt mask */
-	MVS_P4_INT_STAT		= 0x200, /* Port 4 interrupt status */
-	MVS_P4_INT_MASK		= 0x204, /* Port 4 interrupt enable mask */
-
-					 /* ports 1-3 follow after this */
-	MVS_P0_SER_CTLSTAT	= 0x180, /* port0 serial control/status */
-	MVS_P4_SER_CTLSTAT	= 0x220, /* port4 serial control/status */
-
-	MVS_CMD_ADDR		= 0x1B8, /* Command register port (addr) */
-	MVS_CMD_DATA		= 0x1BC, /* Command register port (data) */
-
-					 /* ports 1-3 follow after this */
-	MVS_P0_CFG_ADDR		= 0x1C0, /* port0 phy register address */
-	MVS_P0_CFG_DATA		= 0x1C4, /* port0 phy register data */
-	MVS_P4_CFG_ADDR		= 0x230, /* Port 4 config address */
-	MVS_P4_CFG_DATA		= 0x234, /* Port 4 config data */
-
-					 /* ports 1-3 follow after this */
-	MVS_P0_VSR_ADDR		= 0x1E0, /* port0 VSR address */
-	MVS_P0_VSR_DATA		= 0x1E4, /* port0 VSR data */
-	MVS_P4_VSR_ADDR		= 0x250, /* port 4 VSR addr */
-	MVS_P4_VSR_DATA		= 0x254, /* port 4 VSR data */
-};
-
-enum hw_register_bits {
-	/* MVS_GBL_CTL */
-	INT_EN			= (1U << 1),	/* Global int enable */
-	HBA_RST			= (1U << 0),	/* HBA reset */
-
-	/* MVS_GBL_INT_STAT */
-	INT_XOR			= (1U << 4),	/* XOR engine event */
-	INT_SAS_SATA		= (1U << 0),	/* SAS/SATA event */
-
-	/* MVS_GBL_PORT_TYPE */			/* shl for ports 1-3 */
-	SATA_TARGET		= (1U << 16),	/* port0 SATA target enable */
-	MODE_AUTO_DET_PORT7 = (1U << 15),	/* port0 SAS/SATA autodetect */
-	MODE_AUTO_DET_PORT6 = (1U << 14),
-	MODE_AUTO_DET_PORT5 = (1U << 13),
-	MODE_AUTO_DET_PORT4 = (1U << 12),
-	MODE_AUTO_DET_PORT3 = (1U << 11),
-	MODE_AUTO_DET_PORT2 = (1U << 10),
-	MODE_AUTO_DET_PORT1 = (1U << 9),
-	MODE_AUTO_DET_PORT0 = (1U << 8),
-	MODE_AUTO_DET_EN    =	MODE_AUTO_DET_PORT0 | MODE_AUTO_DET_PORT1 |
-				MODE_AUTO_DET_PORT2 | MODE_AUTO_DET_PORT3 |
-				MODE_AUTO_DET_PORT4 | MODE_AUTO_DET_PORT5 |
-				MODE_AUTO_DET_PORT6 | MODE_AUTO_DET_PORT7,
-	MODE_SAS_PORT7_MASK = (1U << 7),  /* port0 SAS(1), SATA(0) mode */
-	MODE_SAS_PORT6_MASK = (1U << 6),
-	MODE_SAS_PORT5_MASK = (1U << 5),
-	MODE_SAS_PORT4_MASK = (1U << 4),
-	MODE_SAS_PORT3_MASK = (1U << 3),
-	MODE_SAS_PORT2_MASK = (1U << 2),
-	MODE_SAS_PORT1_MASK = (1U << 1),
-	MODE_SAS_PORT0_MASK = (1U << 0),
-	MODE_SAS_SATA	=	MODE_SAS_PORT0_MASK | MODE_SAS_PORT1_MASK |
-				MODE_SAS_PORT2_MASK | MODE_SAS_PORT3_MASK |
-				MODE_SAS_PORT4_MASK | MODE_SAS_PORT5_MASK |
-				MODE_SAS_PORT6_MASK | MODE_SAS_PORT7_MASK,
-
-				/* SAS_MODE value may be
-				 * dictated (in hw) by values
-				 * of SATA_TARGET & AUTO_DET
-				 */
-
-	/* MVS_TX_CFG */
-	TX_EN			= (1U << 16),	/* Enable TX */
-	TX_RING_SZ_MASK		= 0xfff,	/* TX ring size, bits 11:0 */
-
-	/* MVS_RX_CFG */
-	RX_EN			= (1U << 16),	/* Enable RX */
-	RX_RING_SZ_MASK		= 0xfff,	/* RX ring size, bits 11:0 */
-
-	/* MVS_INT_COAL */
-	COAL_EN			= (1U << 16),	/* Enable int coalescing */
-
-	/* MVS_INT_STAT, MVS_INT_MASK */
-	CINT_I2C		= (1U << 31),	/* I2C event */
-	CINT_SW0		= (1U << 30),	/* software event 0 */
-	CINT_SW1		= (1U << 29),	/* software event 1 */
-	CINT_PRD_BC		= (1U << 28),	/* PRD BC err for read cmd */
-	CINT_DMA_PCIE		= (1U << 27),	/* DMA to PCIE timeout */
-	CINT_MEM		= (1U << 26),	/* int mem parity err */
-	CINT_I2C_SLAVE		= (1U << 25),	/* slave I2C event */
-	CINT_SRS		= (1U << 3),	/* SRS event */
-	CINT_CI_STOP		= (1U << 1),	/* cmd issue stopped */
-	CINT_DONE		= (1U << 0),	/* cmd completion */
-
-						/* shl for ports 1-3 */
-	CINT_PORT_STOPPED	= (1U << 16),	/* port0 stopped */
-	CINT_PORT		= (1U << 8),	/* port0 event */
-	CINT_PORT_MASK_OFFSET	= 8,
-	CINT_PORT_MASK		= (0xFF << CINT_PORT_MASK_OFFSET),
-
-	/* TX (delivery) ring bits */
-	TXQ_CMD_SHIFT		= 29,
-	TXQ_CMD_SSP		= 1,		/* SSP protocol */
-	TXQ_CMD_SMP		= 2,		/* SMP protocol */
-	TXQ_CMD_STP		= 3,		/* STP/SATA protocol */
-	TXQ_CMD_SSP_FREE_LIST	= 4,		/* add to SSP targ free list */
-	TXQ_CMD_SLOT_RESET	= 7,		/* reset command slot */
-	TXQ_MODE_I		= (1U << 28),	/* mode: 0=target,1=initiator */
-	TXQ_PRIO_HI		= (1U << 27),	/* priority: 0=normal, 1=high */
-	TXQ_SRS_SHIFT		= 20,		/* SATA register set */
-	TXQ_SRS_MASK		= 0x7f,
-	TXQ_PHY_SHIFT		= 12,		/* PHY bitmap */
-	TXQ_PHY_MASK		= 0xff,
-	TXQ_SLOT_MASK		= 0xfff,	/* slot number */
-
-	/* RX (completion) ring bits */
-	RXQ_GOOD		= (1U << 23),	/* Response good */
-	RXQ_SLOT_RESET		= (1U << 21),	/* Slot reset complete */
-	RXQ_CMD_RX		= (1U << 20),	/* target cmd received */
-	RXQ_ATTN		= (1U << 19),	/* attention */
-	RXQ_RSP			= (1U << 18),	/* response frame xfer'd */
-	RXQ_ERR			= (1U << 17),	/* err info rec xfer'd */
-	RXQ_DONE		= (1U << 16),	/* cmd complete */
-	RXQ_SLOT_MASK		= 0xfff,	/* slot number */
-
-	/* mvs_cmd_hdr bits */
-	MCH_PRD_LEN_SHIFT	= 16,		/* 16-bit PRD table len */
-	MCH_SSP_FR_TYPE_SHIFT	= 13,		/* SSP frame type */
-
-						/* SSP initiator only */
-	MCH_SSP_FR_CMD		= 0x0,		/* COMMAND frame */
-
-						/* SSP initiator or target */
-	MCH_SSP_FR_TASK		= 0x1,		/* TASK frame */
-
-						/* SSP target only */
-	MCH_SSP_FR_XFER_RDY	= 0x4,		/* XFER_RDY frame */
-	MCH_SSP_FR_RESP		= 0x5,		/* RESPONSE frame */
-	MCH_SSP_FR_READ		= 0x6,		/* Read DATA frame(s) */
-	MCH_SSP_FR_READ_RESP	= 0x7,		/* ditto, plus RESPONSE */
-
-	MCH_PASSTHRU		= (1U << 12),	/* pass-through (SSP) */
-	MCH_FBURST		= (1U << 11),	/* first burst (SSP) */
-	MCH_CHK_LEN		= (1U << 10),	/* chk xfer len (SSP) */
-	MCH_RETRY		= (1U << 9),	/* tport layer retry (SSP) */
-	MCH_PROTECTION		= (1U << 8),	/* protection info rec (SSP) */
-	MCH_RESET		= (1U << 7),	/* Reset (STP/SATA) */
-	MCH_FPDMA		= (1U << 6),	/* First party DMA (STP/SATA) */
-	MCH_ATAPI		= (1U << 5),	/* ATAPI (STP/SATA) */
-	MCH_BIST		= (1U << 4),	/* BIST activate (STP/SATA) */
-	MCH_PMP_MASK		= 0xf,		/* PMP from cmd FIS (STP/SATA)*/
-
-	CCTL_RST		= (1U << 5),	/* port logic reset */
-
-						/* 0(LSB first), 1(MSB first) */
-	CCTL_ENDIAN_DATA	= (1U << 3),	/* PRD data */
-	CCTL_ENDIAN_RSP		= (1U << 2),	/* response frame */
-	CCTL_ENDIAN_OPEN	= (1U << 1),	/* open address frame */
-	CCTL_ENDIAN_CMD		= (1U << 0),	/* command table */
-
-	/* MVS_Px_SER_CTLSTAT (per-phy control) */
-	PHY_SSP_RST		= (1U << 3),	/* reset SSP link layer */
-	PHY_BCAST_CHG		= (1U << 2),	/* broadcast(change) notif */
-	PHY_RST_HARD		= (1U << 1),	/* hard reset + phy reset */
-	PHY_RST			= (1U << 0),	/* phy reset */
-	PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0xF << 8),
-	PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0xF << 12),
-	PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (16),
-	PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
-			(0xF << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
-	PHY_READY_MASK		= (1U << 20),
-
-	/* MVS_Px_INT_STAT, MVS_Px_INT_MASK (per-phy events) */
-	PHYEV_DEC_ERR		= (1U << 24),	/* Phy Decoding Error */
-	PHYEV_UNASSOC_FIS	= (1U << 19),	/* unassociated FIS rx'd */
-	PHYEV_AN		= (1U << 18),	/* SATA async notification */
-	PHYEV_BIST_ACT		= (1U << 17),	/* BIST activate FIS */
-	PHYEV_SIG_FIS		= (1U << 16),	/* signature FIS */
-	PHYEV_POOF		= (1U << 12),	/* phy ready from 1 -> 0 */
-	PHYEV_IU_BIG		= (1U << 11),	/* IU too long err */
-	PHYEV_IU_SMALL		= (1U << 10),	/* IU too short err */
-	PHYEV_UNK_TAG		= (1U << 9),	/* unknown tag */
-	PHYEV_BROAD_CH		= (1U << 8),	/* broadcast(CHANGE) */
-	PHYEV_COMWAKE		= (1U << 7),	/* COMWAKE rx'd */
-	PHYEV_PORT_SEL		= (1U << 6),	/* port selector present */
-	PHYEV_HARD_RST		= (1U << 5),	/* hard reset rx'd */
-	PHYEV_ID_TMOUT		= (1U << 4),	/* identify timeout */
-	PHYEV_ID_FAIL		= (1U << 3),	/* identify failed */
-	PHYEV_ID_DONE		= (1U << 2),	/* identify done */
-	PHYEV_HARD_RST_DONE	= (1U << 1),	/* hard reset done */
-	PHYEV_RDY_CH		= (1U << 0),	/* phy ready changed state */
-
-	/* MVS_PCS */
-	PCS_EN_SATA_REG_SHIFT	= (16),		/* Enable SATA Register Set */
-	PCS_EN_PORT_XMT_SHIFT	= (12),		/* Enable Port Transmit */
-	PCS_EN_PORT_XMT_SHIFT2	= (8),		/* For 6480 */
-	PCS_SATA_RETRY		= (1U << 8),	/* retry ctl FIS on R_ERR */
-	PCS_RSP_RX_EN		= (1U << 7),	/* raw response rx */
-	PCS_SELF_CLEAR		= (1U << 5),	/* self-clearing int mode */
-	PCS_FIS_RX_EN		= (1U << 4),	/* FIS rx enable */
-	PCS_CMD_STOP_ERR	= (1U << 3),	/* cmd stop-on-err enable */
-	PCS_CMD_RST		= (1U << 1),	/* reset cmd issue */
-	PCS_CMD_EN		= (1U << 0),	/* enable cmd issue */
-
-	/* Port n Attached Device Info */
-	PORT_DEV_SSP_TRGT	= (1U << 19),
-	PORT_DEV_SMP_TRGT	= (1U << 18),
-	PORT_DEV_STP_TRGT	= (1U << 17),
-	PORT_DEV_SSP_INIT	= (1U << 11),
-	PORT_DEV_SMP_INIT	= (1U << 10),
-	PORT_DEV_STP_INIT	= (1U << 9),
-	PORT_PHY_ID_MASK	= (0xFFU << 24),
-	PORT_DEV_TRGT_MASK	= (0x7U << 17),
-	PORT_DEV_INIT_MASK	= (0x7U << 9),
-	PORT_DEV_TYPE_MASK	= (0x7U << 0),
-
-	/* Port n PHY Status */
-	PHY_RDY			= (1U << 2),
-	PHY_DW_SYNC		= (1U << 1),
-	PHY_OOB_DTCTD		= (1U << 0),
-
-	/* VSR */
-	/* PHYMODE 6 (CDB) */
-	PHY_MODE6_LATECLK	= (1U << 29),	/* Lock Clock */
-	PHY_MODE6_DTL_SPEED	= (1U << 27),	/* Digital Loop Speed */
-	PHY_MODE6_FC_ORDER	= (1U << 26),	/* Fibre Channel Mode Order*/
-	PHY_MODE6_MUCNT_EN	= (1U << 24),	/* u Count Enable */
-	PHY_MODE6_SEL_MUCNT_LEN	= (1U << 22),	/* Training Length Select */
-	PHY_MODE6_SELMUPI	= (1U << 20),	/* Phase Multi Select (init) */
-	PHY_MODE6_SELMUPF	= (1U << 18),	/* Phase Multi Select (final) */
-	PHY_MODE6_SELMUFF	= (1U << 16),	/* Freq Loop Multi Sel(final) */
-	PHY_MODE6_SELMUFI	= (1U << 14),	/* Freq Loop Multi Sel(init) */
-	PHY_MODE6_FREEZE_LOOP	= (1U << 12),	/* Freeze Rx CDR Loop */
-	PHY_MODE6_INT_RXFOFFS	= (1U << 3),	/* Rx CDR Freq Loop Enable */
-	PHY_MODE6_FRC_RXFOFFS	= (1U << 2),	/* Initial Rx CDR Offset */
-	PHY_MODE6_STAU_0D8	= (1U << 1),	/* Rx CDR Freq Loop Saturate */
-	PHY_MODE6_RXSAT_DIS	= (1U << 0),	/* Saturate Ctl */
-};
-
-enum mvs_info_flags {
-	MVF_MSI			= (1U << 0),	/* MSI is enabled */
-	MVF_PHY_PWR_FIX		= (1U << 1),	/* bug workaround */
-};
-
-enum sas_cmd_port_registers {
-	CMD_CMRST_OOB_DET	= 0x100, /* COMRESET OOB detect register */
-	CMD_CMWK_OOB_DET	= 0x104, /* COMWAKE OOB detect register */
-	CMD_CMSAS_OOB_DET	= 0x108, /* COMSAS OOB detect register */
-	CMD_BRST_OOB_DET	= 0x10c, /* burst OOB detect register */
-	CMD_OOB_SPACE		= 0x110, /* OOB space control register */
-	CMD_OOB_BURST		= 0x114, /* OOB burst control register */
-	CMD_PHY_TIMER		= 0x118, /* PHY timer control register */
-	CMD_PHY_CONFIG0		= 0x11c, /* PHY config register 0 */
-	CMD_PHY_CONFIG1		= 0x120, /* PHY config register 1 */
-	CMD_SAS_CTL0		= 0x124, /* SAS control register 0 */
-	CMD_SAS_CTL1		= 0x128, /* SAS control register 1 */
-	CMD_SAS_CTL2		= 0x12c, /* SAS control register 2 */
-	CMD_SAS_CTL3		= 0x130, /* SAS control register 3 */
-	CMD_ID_TEST		= 0x134, /* ID test register */
-	CMD_PL_TIMER		= 0x138, /* PL timer register */
-	CMD_WD_TIMER		= 0x13c, /* WD timer register */
-	CMD_PORT_SEL_COUNT	= 0x140, /* port selector count register */
-	CMD_APP_MEM_CTL		= 0x144, /* Application Memory Control */
-	CMD_XOR_MEM_CTL		= 0x148, /* XOR Block Memory Control */
-	CMD_DMA_MEM_CTL		= 0x14c, /* DMA Block Memory Control */
-	CMD_PORT_MEM_CTL0	= 0x150, /* Port Memory Control 0 */
-	CMD_PORT_MEM_CTL1	= 0x154, /* Port Memory Control 1 */
-	CMD_SATA_PORT_MEM_CTL0	= 0x158, /* SATA Port Memory Control 0 */
-	CMD_SATA_PORT_MEM_CTL1	= 0x15c, /* SATA Port Memory Control 1 */
-	CMD_XOR_MEM_BIST_CTL	= 0x160, /* XOR Memory BIST Control */
-	CMD_XOR_MEM_BIST_STAT	= 0x164, /* XOR Memroy BIST Status */
-	CMD_DMA_MEM_BIST_CTL	= 0x168, /* DMA Memory BIST Control */
-	CMD_DMA_MEM_BIST_STAT	= 0x16c, /* DMA Memory BIST Status */
-	CMD_PORT_MEM_BIST_CTL	= 0x170, /* Port Memory BIST Control */
-	CMD_PORT_MEM_BIST_STAT0 = 0x174, /* Port Memory BIST Status 0 */
-	CMD_PORT_MEM_BIST_STAT1 = 0x178, /* Port Memory BIST Status 1 */
-	CMD_STP_MEM_BIST_CTL	= 0x17c, /* STP Memory BIST Control */
-	CMD_STP_MEM_BIST_STAT0	= 0x180, /* STP Memory BIST Status 0 */
-	CMD_STP_MEM_BIST_STAT1	= 0x184, /* STP Memory BIST Status 1 */
-	CMD_RESET_COUNT		= 0x188, /* Reset Count */
-	CMD_MONTR_DATA_SEL	= 0x18C, /* Monitor Data/Select */
-	CMD_PLL_PHY_CONFIG	= 0x190, /* PLL/PHY Configuration */
-	CMD_PHY_CTL		= 0x194, /* PHY Control and Status */
-	CMD_PHY_TEST_COUNT0	= 0x198, /* Phy Test Count 0 */
-	CMD_PHY_TEST_COUNT1	= 0x19C, /* Phy Test Count 1 */
-	CMD_PHY_TEST_COUNT2	= 0x1A0, /* Phy Test Count 2 */
-	CMD_APP_ERR_CONFIG	= 0x1A4, /* Application Error Configuration */
-	CMD_PND_FIFO_CTL0	= 0x1A8, /* Pending FIFO Control 0 */
-	CMD_HOST_CTL		= 0x1AC, /* Host Control Status */
-	CMD_HOST_WR_DATA	= 0x1B0, /* Host Write Data */
-	CMD_HOST_RD_DATA	= 0x1B4, /* Host Read Data */
-	CMD_PHY_MODE_21		= 0x1B8, /* Phy Mode 21 */
-	CMD_SL_MODE0		= 0x1BC, /* SL Mode 0 */
-	CMD_SL_MODE1		= 0x1C0, /* SL Mode 1 */
-	CMD_PND_FIFO_CTL1	= 0x1C4, /* Pending FIFO Control 1 */
-};
-
-/* SAS/SATA configuration port registers, aka phy registers */
-enum sas_sata_config_port_regs {
-	PHYR_IDENTIFY		= 0x00,	/* info for IDENTIFY frame */
-	PHYR_ADDR_LO		= 0x04,	/* my SAS address (low) */
-	PHYR_ADDR_HI		= 0x08,	/* my SAS address (high) */
-	PHYR_ATT_DEV_INFO	= 0x0C,	/* attached device info */
-	PHYR_ATT_ADDR_LO	= 0x10,	/* attached dev SAS addr (low) */
-	PHYR_ATT_ADDR_HI	= 0x14,	/* attached dev SAS addr (high) */
-	PHYR_SATA_CTL		= 0x18,	/* SATA control */
-	PHYR_PHY_STAT		= 0x1C,	/* PHY status */
-	PHYR_SATA_SIG0		= 0x20,	/*port SATA signature FIS(Byte 0-3) */
-	PHYR_SATA_SIG1		= 0x24,	/*port SATA signature FIS(Byte 4-7) */
-	PHYR_SATA_SIG2		= 0x28,	/*port SATA signature FIS(Byte 8-11) */
-	PHYR_SATA_SIG3		= 0x2c,	/*port SATA signature FIS(Byte 12-15) */
-	PHYR_R_ERR_COUNT	= 0x30, /* port R_ERR count register */
-	PHYR_CRC_ERR_COUNT	= 0x34, /* port CRC error count register */
-	PHYR_WIDE_PORT		= 0x38,	/* wide port participating */
-	PHYR_CURRENT0		= 0x80,	/* current connection info 0 */
-	PHYR_CURRENT1		= 0x84,	/* current connection info 1 */
-	PHYR_CURRENT2		= 0x88,	/* current connection info 2 */
-};
-
-/*  SAS/SATA Vendor Specific Port Registers */
-enum sas_sata_vsp_regs {
-	VSR_PHY_STAT		= 0x00, /* Phy Status */
-	VSR_PHY_MODE1		= 0x01, /* phy tx */
-	VSR_PHY_MODE2		= 0x02, /* tx scc */
-	VSR_PHY_MODE3		= 0x03, /* pll */
-	VSR_PHY_MODE4		= 0x04, /* VCO */
-	VSR_PHY_MODE5		= 0x05, /* Rx */
-	VSR_PHY_MODE6		= 0x06, /* CDR */
-	VSR_PHY_MODE7		= 0x07, /* Impedance */
-	VSR_PHY_MODE8		= 0x08, /* Voltage */
-	VSR_PHY_MODE9		= 0x09, /* Test */
-	VSR_PHY_MODE10		= 0x0A, /* Power */
-	VSR_PHY_MODE11		= 0x0B, /* Phy Mode */
-	VSR_PHY_VS0		= 0x0C, /* Vednor Specific 0 */
-	VSR_PHY_VS1		= 0x0D, /* Vednor Specific 1 */
-};
-
-enum pci_cfg_registers {
-	PCR_PHY_CTL	= 0x40,
-	PCR_PHY_CTL2	= 0x90,
-	PCR_DEV_CTRL	= 0xE8,
-};
-
-enum pci_cfg_register_bits {
-	PCTL_PWR_ON	= (0xFU << 24),
-	PCTL_OFF	= (0xFU << 12),
-	PRD_REQ_SIZE	= (0x4000),
-	PRD_REQ_MASK	= (0x00007000),
-};
-
-enum nvram_layout_offsets {
-	NVR_SIG		= 0x00,		/* 0xAA, 0x55 */
-	NVR_SAS_ADDR	= 0x02,		/* 8-byte SAS address */
-};
-
-enum chip_flavors {
-	chip_6320,
-	chip_6440,
-	chip_6480,
-};
-
-enum port_type {
-	PORT_TYPE_SAS	=  (1L << 1),
-	PORT_TYPE_SATA	=  (1L << 0),
-};
-
-/* Command Table Format */
-enum ct_format {
-	/* SSP */
-	SSP_F_H		=  0x00,
-	SSP_F_IU	=  0x18,
-	SSP_F_MAX	=  0x4D,
-	/* STP */
-	STP_CMD_FIS	=  0x00,
-	STP_ATAPI_CMD	=  0x40,
-	STP_F_MAX	=  0x10,
-	/* SMP */
-	SMP_F_T		=  0x00,
-	SMP_F_DEP	=  0x01,
-	SMP_F_MAX	=  0x101,
-};
-
-enum status_buffer {
-	SB_EIR_OFF	=  0x00,	/* Error Information Record */
-	SB_RFB_OFF	=  0x08,	/* Response Frame Buffer */
-	SB_RFB_MAX	=  0x400,	/* RFB size*/
-};
-
-enum error_info_rec {
-	CMD_ISS_STPD	= (1U << 31),	/* Cmd Issue Stopped */
-	CMD_PI_ERR	= (1U << 30),	/* Protection info error.  see flags2 */
-	RSP_OVER	= (1U << 29),	/* rsp buffer overflow */
-	RETRY_LIM	= (1U << 28),	/* FIS/frame retry limit exceeded */
-	UNK_FIS 	= (1U << 27),	/* unknown FIS */
-	DMA_TERM	= (1U << 26),	/* DMA terminate primitive rx'd */
-	SYNC_ERR	= (1U << 25),	/* SYNC rx'd during frame xmit */
-	TFILE_ERR	= (1U << 24),	/* SATA taskfile Error bit set */
-	R_ERR		= (1U << 23),	/* SATA returned R_ERR prim */
-	RD_OFS		= (1U << 20),	/* Read DATA frame invalid offset */
-	XFER_RDY_OFS	= (1U << 19),	/* XFER_RDY offset error */
-	UNEXP_XFER_RDY	= (1U << 18),	/* unexpected XFER_RDY error */
-	DATA_OVER_UNDER = (1U << 16),	/* data overflow/underflow */
-	INTERLOCK	= (1U << 15),	/* interlock error */
-	NAK		= (1U << 14),	/* NAK rx'd */
-	ACK_NAK_TO	= (1U << 13),	/* ACK/NAK timeout */
-	CXN_CLOSED	= (1U << 12),	/* cxn closed w/out ack/nak */
-	OPEN_TO 	= (1U << 11),	/* I_T nexus lost, open cxn timeout */
-	PATH_BLOCKED	= (1U << 10),	/* I_T nexus lost, pathway blocked */
-	NO_DEST 	= (1U << 9),	/* I_T nexus lost, no destination */
-	STP_RES_BSY	= (1U << 8),	/* STP resources busy */
-	BREAK		= (1U << 7),	/* break received */
-	BAD_DEST	= (1U << 6),	/* bad destination */
-	BAD_PROTO	= (1U << 5),	/* protocol not supported */
-	BAD_RATE	= (1U << 4),	/* cxn rate not supported */
-	WRONG_DEST	= (1U << 3),	/* wrong destination error */
-	CREDIT_TO	= (1U << 2),	/* credit timeout */
-	WDOG_TO 	= (1U << 1),	/* watchdog timeout */
-	BUF_PAR 	= (1U << 0),	/* buffer parity error */
-};
-
-enum error_info_rec_2 {
-	SLOT_BSY_ERR	= (1U << 31),	/* Slot Busy Error */
-	GRD_CHK_ERR	= (1U << 14),	/* Guard Check Error */
-	APP_CHK_ERR	= (1U << 13),	/* Application Check error */
-	REF_CHK_ERR	= (1U << 12),	/* Reference Check Error */
-	USR_BLK_NM	= (1U << 0),	/* User Block Number */
-};
-
-struct mvs_chip_info {
-	u32		n_phy;
-	u32		srs_sz;
-	u32		slot_width;
-};
-
-struct mvs_err_info {
-	__le32			flags;
-	__le32			flags2;
-};
-
-struct mvs_prd {
-	__le64			addr;		/* 64-bit buffer address */
-	__le32			reserved;
-	__le32			len;		/* 16-bit length */
-};
-
-struct mvs_cmd_hdr {
-	__le32			flags;		/* PRD tbl len; SAS, SATA ctl */
-	__le32			lens;		/* cmd, max resp frame len */
-	__le32			tags;		/* targ port xfer tag; tag */
-	__le32			data_len;	/* data xfer len */
-	__le64			cmd_tbl;	/* command table address */
-	__le64			open_frame;	/* open addr frame address */
-	__le64			status_buf;	/* status buffer address */
-	__le64			prd_tbl;	/* PRD tbl address */
-	__le32			reserved[4];
-};
-
-struct mvs_port {
-	struct asd_sas_port	sas_port;
-	u8			port_attached;
-	u8			taskfileset;
-	u8			wide_port_phymap;
-	struct list_head	list;
-};
-
-struct mvs_phy {
-	struct mvs_port		*port;
-	struct asd_sas_phy	sas_phy;
-	struct sas_identify	identify;
-	struct scsi_device	*sdev;
-	u64		dev_sas_addr;
-	u64		att_dev_sas_addr;
-	u32		att_dev_info;
-	u32		dev_info;
-	u32		phy_type;
-	u32		phy_status;
-	u32		irq_status;
-	u32		frame_rcvd_size;
-	u8		frame_rcvd[32];
-	u8		phy_attached;
-	enum sas_linkrate	minimum_linkrate;
-	enum sas_linkrate	maximum_linkrate;
-};
-
-struct mvs_slot_info {
-	struct list_head	list;
-	struct sas_task		*task;
-	u32			n_elem;
-	u32			tx;
-
-	/* DMA buffer for storing cmd tbl, open addr frame, status buffer,
-	 * and PRD table
-	 */
-	void			*buf;
-	dma_addr_t		buf_dma;
-#if _MV_DUMP
-	u32			cmd_size;
-#endif
-
-	void			*response;
-	struct mvs_port		*port;
-};
-
-struct mvs_info {
-	unsigned long		flags;
-
-	spinlock_t		lock;		/* host-wide lock */
-	struct pci_dev		*pdev;		/* our device */
-	void __iomem		*regs;		/* enhanced mode registers */
-	void __iomem		*peri_regs;	/* peripheral registers */
-
-	u8			sas_addr[SAS_ADDR_SIZE];
-	struct sas_ha_struct	sas;		/* SCSI/SAS glue */
-	struct Scsi_Host	*shost;
-
-	__le32			*tx;		/* TX (delivery) DMA ring */
-	dma_addr_t		tx_dma;
-	u32			tx_prod;	/* cached next-producer idx */
-
-	__le32			*rx;		/* RX (completion) DMA ring */
-	dma_addr_t		rx_dma;
-	u32			rx_cons;	/* RX consumer idx */
-
-	__le32			*rx_fis;	/* RX'd FIS area */
-	dma_addr_t		rx_fis_dma;
-
-	struct mvs_cmd_hdr	*slot;	/* DMA command header slots */
-	dma_addr_t		slot_dma;
-
-	const struct mvs_chip_info *chip;
-
-	u8			tags[MVS_SLOTS];
-	struct mvs_slot_info	slot_info[MVS_SLOTS];
-				/* further per-slot information */
-	struct mvs_phy		phy[MVS_MAX_PHYS];
-	struct mvs_port		port[MVS_MAX_PHYS];
-#ifdef MVS_USE_TASKLET
-	struct tasklet_struct	tasklet;
-#endif
-};
-
-static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
-			   void *funcdata);
-static u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port);
-static void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val);
-static u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port);
-static void mvs_write_port_irq_stat(struct mvs_info *mvi, u32 port, u32 val);
-static void mvs_write_port_irq_mask(struct mvs_info *mvi, u32 port, u32 val);
-static u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port);
-
-static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i);
-static void mvs_detect_porttype(struct mvs_info *mvi, int i);
-static void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
-static void mvs_release_task(struct mvs_info *mvi, int phy_no);
-
-static int mvs_scan_finished(struct Scsi_Host *, unsigned long);
-static void mvs_scan_start(struct Scsi_Host *);
-static int mvs_slave_configure(struct scsi_device *sdev);
-
-static struct scsi_transport_template *mvs_stt;
-
-static const struct mvs_chip_info mvs_chips[] = {
-	[chip_6320] =		{ 2, 16, 9  },
-	[chip_6440] =		{ 4, 16, 9  },
-	[chip_6480] =		{ 8, 32, 10 },
-};
-
-static struct scsi_host_template mvs_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.queuecommand		= sas_queuecommand,
-	.target_alloc		= sas_target_alloc,
-	.slave_configure	= mvs_slave_configure,
-	.slave_destroy		= sas_slave_destroy,
-	.scan_finished		= mvs_scan_finished,
-	.scan_start		= mvs_scan_start,
-	.change_queue_depth	= sas_change_queue_depth,
-	.change_queue_type	= sas_change_queue_type,
-	.bios_param		= sas_bios_param,
-	.can_queue		= 1,
-	.cmd_per_lun		= 1,
-	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
-	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
-	.use_clustering		= ENABLE_CLUSTERING,
-	.eh_device_reset_handler	= sas_eh_device_reset_handler,
-	.eh_bus_reset_handler	= sas_eh_bus_reset_handler,
-	.slave_alloc		= sas_slave_alloc,
-	.target_destroy		= sas_target_destroy,
-	.ioctl			= sas_ioctl,
-};
-
-static void mvs_hexdump(u32 size, u8 *data, u32 baseaddr)
-{
-	u32 i;
-	u32 run;
-	u32 offset;
-
-	offset = 0;
-	while (size) {
-		printk("%08X : ", baseaddr + offset);
-		if (size >= 16)
-			run = 16;
-		else
-			run = size;
-		size -= run;
-		for (i = 0; i < 16; i++) {
-			if (i < run)
-				printk("%02X ", (u32)data[i]);
-			else
-				printk("   ");
-		}
-		printk(": ");
-		for (i = 0; i < run; i++)
-			printk("%c", isalnum(data[i]) ? data[i] : '.');
-		printk("\n");
-		data = &data[16];
-		offset += run;
-	}
-	printk("\n");
-}
-
-#if _MV_DUMP
-static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
-				   enum sas_protocol proto)
-{
-	u32 offset;
-	struct pci_dev *pdev = mvi->pdev;
-	struct mvs_slot_info *slot = &mvi->slot_info[tag];
-
-	offset = slot->cmd_size + MVS_OAF_SZ +
-	    sizeof(struct mvs_prd) * slot->n_elem;
-	dev_printk(KERN_DEBUG, &pdev->dev, "+---->Status buffer[%d] :\n",
-			tag);
-	mvs_hexdump(32, (u8 *) slot->response,
-		    (u32) slot->buf_dma + offset);
-}
-#endif
-
-static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
-				enum sas_protocol proto)
-{
-#if _MV_DUMP
-	u32 sz, w_ptr;
-	u64 addr;
-	void __iomem *regs = mvi->regs;
-	struct pci_dev *pdev = mvi->pdev;
-	struct mvs_slot_info *slot = &mvi->slot_info[tag];
-
-	/*Delivery Queue */
-	sz = mr32(TX_CFG) & TX_RING_SZ_MASK;
-	w_ptr = slot->tx;
-	addr = mr32(TX_HI) << 16 << 16 | mr32(TX_LO);
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr);
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Delivery Queue Base Address=0x%llX (PA)"
-		"(tx_dma=0x%llX), Entry=%04d\n",
-		addr, mvi->tx_dma, w_ptr);
-	mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]),
-			(u32) mvi->tx_dma + sizeof(u32) * w_ptr);
-	/*Command List */
-	addr = mvi->slot_dma;
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Command List Base Address=0x%llX (PA)"
-		"(slot_dma=0x%llX), Header=%03d\n",
-		addr, slot->buf_dma, tag);
-	dev_printk(KERN_DEBUG, &pdev->dev, "Command Header[%03d]:\n", tag);
-	/*mvs_cmd_hdr */
-	mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]),
-		(u32) mvi->slot_dma + tag * sizeof(struct mvs_cmd_hdr));
-	/*1.command table area */
-	dev_printk(KERN_DEBUG, &pdev->dev, "+---->Command Table :\n");
-	mvs_hexdump(slot->cmd_size, (u8 *) slot->buf, (u32) slot->buf_dma);
-	/*2.open address frame area */
-	dev_printk(KERN_DEBUG, &pdev->dev, "+---->Open Address Frame :\n");
-	mvs_hexdump(MVS_OAF_SZ, (u8 *) slot->buf + slot->cmd_size,
-				(u32) slot->buf_dma + slot->cmd_size);
-	/*3.status buffer */
-	mvs_hba_sb_dump(mvi, tag, proto);
-	/*4.PRD table */
-	dev_printk(KERN_DEBUG, &pdev->dev, "+---->PRD table :\n");
-	mvs_hexdump(sizeof(struct mvs_prd) * slot->n_elem,
-		(u8 *) slot->buf + slot->cmd_size + MVS_OAF_SZ,
-		(u32) slot->buf_dma + slot->cmd_size + MVS_OAF_SZ);
-#endif
-}
-
-static void mvs_hba_cq_dump(struct mvs_info *mvi)
-{
-#if (_MV_DUMP > 2)
-	u64 addr;
-	void __iomem *regs = mvi->regs;
-	struct pci_dev *pdev = mvi->pdev;
-	u32 entry = mvi->rx_cons + 1;
-	u32 rx_desc = le32_to_cpu(mvi->rx[entry]);
-
-	/*Completion Queue */
-	addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO);
-	dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%p\n",
-		   mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Completion List Base Address=0x%llX (PA), "
-		"CQ_Entry=%04d, CQ_WP=0x%08X\n",
-		addr, entry - 1, mvi->rx[0]);
-	mvs_hexdump(sizeof(u32), (u8 *)(&rx_desc),
-		    mvi->rx_dma + sizeof(u32) * entry);
-#endif
-}
-
-static void mvs_hba_interrupt_enable(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
-
-	tmp = mr32(GBL_CTL);
-
-	mw32(GBL_CTL, tmp | INT_EN);
-}
-
-static void mvs_hba_interrupt_disable(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
-
-	tmp = mr32(GBL_CTL);
-
-	mw32(GBL_CTL, tmp & ~INT_EN);
-}
-
-static int mvs_int_rx(struct mvs_info *mvi, bool self_clear);
-
-/* move to PCI layer or libata core? */
-static int pci_go_64(struct pci_dev *pdev)
-{
-	int rc;
-
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-		if (rc) {
-			rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-			if (rc) {
-				dev_printk(KERN_ERR, &pdev->dev,
-					   "64-bit DMA enable failed\n");
-				return rc;
-			}
-		}
-	} else {
-		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_printk(KERN_ERR, &pdev->dev,
-				   "32-bit DMA enable failed\n");
-			return rc;
-		}
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_printk(KERN_ERR, &pdev->dev,
-				   "32-bit consistent DMA enable failed\n");
-			return rc;
-		}
-	}
-
-	return rc;
-}
-
-static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
-{
-	if (task->lldd_task) {
-		struct mvs_slot_info *slot;
-		slot = (struct mvs_slot_info *) task->lldd_task;
-		*tag = slot - mvi->slot_info;
-		return 1;
-	}
-	return 0;
-}
-
-static void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
-{
-	void *bitmap = (void *) &mvi->tags;
-	clear_bit(tag, bitmap);
-}
-
-static void mvs_tag_free(struct mvs_info *mvi, u32 tag)
-{
-	mvs_tag_clear(mvi, tag);
-}
-
-static void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
-{
-	void *bitmap = (void *) &mvi->tags;
-	set_bit(tag, bitmap);
-}
-
-static int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
-{
-	unsigned int index, tag;
-	void *bitmap = (void *) &mvi->tags;
-
-	index = find_first_zero_bit(bitmap, MVS_SLOTS);
-	tag = index;
-	if (tag >= MVS_SLOTS)
-		return -SAS_QUEUE_FULL;
-	mvs_tag_set(mvi, tag);
-	*tag_out = tag;
-	return 0;
-}
-
-static void mvs_tag_init(struct mvs_info *mvi)
-{
-	int i;
-	for (i = 0; i < MVS_SLOTS; ++i)
-		mvs_tag_clear(mvi, i);
-}
-
-#ifndef MVS_DISABLE_NVRAM
-static int mvs_eep_read(void __iomem *regs, u32 addr, u32 *data)
-{
-	int timeout = 1000;
-
-	if (addr & ~SPI_ADDR_MASK)
-		return -EINVAL;
-
-	writel(addr, regs + SPI_CMD);
-	writel(TWSI_RD, regs + SPI_CTL);
-
-	while (timeout-- > 0) {
-		if (readl(regs + SPI_CTL) & TWSI_RDY) {
-			*data = readl(regs + SPI_DATA);
-			return 0;
-		}
-
-		udelay(10);
-	}
-
-	return -EBUSY;
-}
-
-static int mvs_eep_read_buf(void __iomem *regs, u32 addr,
-			    void *buf, u32 buflen)
-{
-	u32 addr_end, tmp_addr, i, j;
-	u32 tmp = 0;
-	int rc;
-	u8 *tmp8, *buf8 = buf;
-
-	addr_end = addr + buflen;
-	tmp_addr = ALIGN(addr, 4);
-	if (addr > 0xff)
-		return -EINVAL;
-
-	j = addr & 0x3;
-	if (j) {
-		rc = mvs_eep_read(regs, tmp_addr, &tmp);
-		if (rc)
-			return rc;
-
-		tmp8 = (u8 *)&tmp;
-		for (i = j; i < 4; i++)
-			*buf8++ = tmp8[i];
-
-		tmp_addr += 4;
-	}
-
-	for (j = ALIGN(addr_end, 4); tmp_addr < j; tmp_addr += 4) {
-		rc = mvs_eep_read(regs, tmp_addr, &tmp);
-		if (rc)
-			return rc;
-
-		memcpy(buf8, &tmp, 4);
-		buf8 += 4;
-	}
-
-	if (tmp_addr < addr_end) {
-		rc = mvs_eep_read(regs, tmp_addr, &tmp);
-		if (rc)
-			return rc;
-
-		tmp8 = (u8 *)&tmp;
-		j = addr_end - tmp_addr;
-		for (i = 0; i < j; i++)
-			*buf8++ = tmp8[i];
-
-		tmp_addr += 4;
-	}
-
-	return 0;
-}
-#endif
-
-static int mvs_nvram_read(struct mvs_info *mvi, u32 addr,
-			  void *buf, u32 buflen)
-{
-#ifndef MVS_DISABLE_NVRAM
-	void __iomem *regs = mvi->regs;
-	int rc, i;
-	u32 sum;
-	u8 hdr[2], *tmp;
-	const char *msg;
-
-	rc = mvs_eep_read_buf(regs, addr, &hdr, 2);
-	if (rc) {
-		msg = "nvram hdr read failed";
-		goto err_out;
-	}
-	rc = mvs_eep_read_buf(regs, addr + 2, buf, buflen);
-	if (rc) {
-		msg = "nvram read failed";
-		goto err_out;
-	}
-
-	if (hdr[0] != 0x5A) {
-		/* entry id */
-		msg = "invalid nvram entry id";
-		rc = -ENOENT;
-		goto err_out;
-	}
-
-	tmp = buf;
-	sum = ((u32)hdr[0]) + ((u32)hdr[1]);
-	for (i = 0; i < buflen; i++)
-		sum += ((u32)tmp[i]);
-
-	if (sum) {
-		msg = "nvram checksum failure";
-		rc = -EILSEQ;
-		goto err_out;
-	}
-
-	return 0;
-
-err_out:
-	dev_printk(KERN_ERR, &mvi->pdev->dev, "%s", msg);
-	return rc;
-#else
-	/* FIXME , For SAS target mode */
-	memcpy(buf, "\x50\x05\x04\x30\x11\xab\x00\x00", 8);
-	return 0;
-#endif
-}
-
-static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
-{
-	struct mvs_phy *phy = &mvi->phy[i];
-	struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
-
-	if (!phy->phy_attached)
-		return;
-
-	if (sas_phy->phy) {
-		struct sas_phy *sphy = sas_phy->phy;
-
-		sphy->negotiated_linkrate = sas_phy->linkrate;
-		sphy->minimum_linkrate = phy->minimum_linkrate;
-		sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
-		sphy->maximum_linkrate = phy->maximum_linkrate;
-		sphy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
-	}
-
-	if (phy->phy_type & PORT_TYPE_SAS) {
-		struct sas_identify_frame *id;
-
-		id = (struct sas_identify_frame *)phy->frame_rcvd;
-		id->dev_type = phy->identify.device_type;
-		id->initiator_bits = SAS_PROTOCOL_ALL;
-		id->target_bits = phy->identify.target_port_protocols;
-	} else if (phy->phy_type & PORT_TYPE_SATA) {
-		/* TODO */
-	}
-	mvi->sas.sas_phy[i]->frame_rcvd_size = phy->frame_rcvd_size;
-	mvi->sas.notify_port_event(mvi->sas.sas_phy[i],
-				   PORTE_BYTES_DMAED);
-}
-
-static int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time)
-{
-	/* give the phy enabling interrupt event time to come in (1s
-	 * is empirically about all it takes) */
-	if (time < HZ)
-		return 0;
-	/* Wait for discovery to finish */
-	scsi_flush_work(shost);
-	return 1;
-}
-
-static void mvs_scan_start(struct Scsi_Host *shost)
-{
-	int i;
-	struct mvs_info *mvi = SHOST_TO_SAS_HA(shost)->lldd_ha;
-
-	for (i = 0; i < mvi->chip->n_phy; ++i) {
-		mvs_bytes_dmaed(mvi, i);
-	}
-}
-
-static int mvs_slave_configure(struct scsi_device *sdev)
-{
-	struct domain_device *dev = sdev_to_domain_dev(sdev);
-	int ret = sas_slave_configure(sdev);
-
-	if (ret)
-		return ret;
-
-	if (dev_is_sata(dev)) {
-		/* struct ata_port *ap = dev->sata_dev.ap; */
-		/* struct ata_device *adev = ap->link.device; */
-
-		/* clamp at no NCQ for the time being */
-		/* adev->flags |= ATA_DFLAG_NCQ_OFF; */
-		scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
-	}
-	return 0;
-}
-
-static void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
-{
-	struct pci_dev *pdev = mvi->pdev;
-	struct sas_ha_struct *sas_ha = &mvi->sas;
-	struct mvs_phy *phy = &mvi->phy[phy_no];
-	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-
-	phy->irq_status = mvs_read_port_irq_stat(mvi, phy_no);
-	/*
-	* events is port event now ,
-	* we need check the interrupt status which belongs to per port.
-	*/
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Port %d Event = %X\n",
-		phy_no, phy->irq_status);
-
-	if (phy->irq_status & (PHYEV_POOF | PHYEV_DEC_ERR)) {
-		mvs_release_task(mvi, phy_no);
-		if (!mvs_is_phy_ready(mvi, phy_no)) {
-			sas_phy_disconnected(sas_phy);
-			sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
-			dev_printk(KERN_INFO, &pdev->dev,
-				"Port %d Unplug Notice\n", phy_no);
-
-		} else
-			mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET, NULL);
-	}
-	if (!(phy->irq_status & PHYEV_DEC_ERR)) {
-		if (phy->irq_status & PHYEV_COMWAKE) {
-			u32 tmp = mvs_read_port_irq_mask(mvi, phy_no);
-			mvs_write_port_irq_mask(mvi, phy_no,
-						tmp | PHYEV_SIG_FIS);
-		}
-		if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
-			phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
-			if (phy->phy_status) {
-				mvs_detect_porttype(mvi, phy_no);
-
-				if (phy->phy_type & PORT_TYPE_SATA) {
-					u32 tmp = mvs_read_port_irq_mask(mvi,
-								phy_no);
-					tmp &= ~PHYEV_SIG_FIS;
-					mvs_write_port_irq_mask(mvi,
-								phy_no, tmp);
-				}
-
-				mvs_update_phyinfo(mvi, phy_no, 0);
-				sas_ha->notify_phy_event(sas_phy,
-							PHYE_OOB_DONE);
-				mvs_bytes_dmaed(mvi, phy_no);
-			} else {
-				dev_printk(KERN_DEBUG, &pdev->dev,
-					"plugin interrupt but phy is gone\n");
-				mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET,
-							NULL);
-			}
-		} else if (phy->irq_status & PHYEV_BROAD_CH) {
-			mvs_release_task(mvi, phy_no);
-			sas_ha->notify_port_event(sas_phy,
-						PORTE_BROADCAST_RCVD);
-		}
-	}
-	mvs_write_port_irq_stat(mvi, phy_no, phy->irq_status);
-}
-
-static void mvs_int_sata(struct mvs_info *mvi)
-{
-	u32 tmp;
-	void __iomem *regs = mvi->regs;
-	tmp = mr32(INT_STAT_SRS);
-	mw32(INT_STAT_SRS, tmp & 0xFFFF);
-}
-
-static void mvs_slot_reset(struct mvs_info *mvi, struct sas_task *task,
-				u32 slot_idx)
-{
-	void __iomem *regs = mvi->regs;
-	struct domain_device *dev = task->dev;
-	struct asd_sas_port *sas_port = dev->port;
-	struct mvs_port *port = mvi->slot_info[slot_idx].port;
-	u32 reg_set, phy_mask;
-
-	if (!sas_protocol_ata(task->task_proto)) {
-		reg_set = 0;
-		phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
-				sas_port->phy_mask;
-	} else {
-		reg_set = port->taskfileset;
-		phy_mask = sas_port->phy_mask;
-	}
-	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | slot_idx |
-					(TXQ_CMD_SLOT_RESET << TXQ_CMD_SHIFT) |
-					(phy_mask << TXQ_PHY_SHIFT) |
-					(reg_set << TXQ_SRS_SHIFT));
-
-	mw32(TX_PROD_IDX, mvi->tx_prod);
-	mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-}
-
-static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
-			u32 slot_idx, int err)
-{
-	struct mvs_port *port = mvi->slot_info[slot_idx].port;
-	struct task_status_struct *tstat = &task->task_status;
-	struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
-	int stat = SAM_GOOD;
-
-	resp->frame_len = sizeof(struct dev_to_host_fis);
-	memcpy(&resp->ending_fis[0],
-	       SATA_RECEIVED_D2H_FIS(port->taskfileset),
-	       sizeof(struct dev_to_host_fis));
-	tstat->buf_valid_size = sizeof(*resp);
-	if (unlikely(err))
-		stat = SAS_PROTO_RESPONSE;
-	return stat;
-}
-
-static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
-{
-	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
-	mvs_tag_clear(mvi, slot_idx);
-}
-
-static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
-			  struct mvs_slot_info *slot, u32 slot_idx)
-{
-	if (!sas_protocol_ata(task->task_proto))
-		if (slot->n_elem)
-			pci_unmap_sg(mvi->pdev, task->scatter,
-				     slot->n_elem, task->data_dir);
-
-	switch (task->task_proto) {
-	case SAS_PROTOCOL_SMP:
-		pci_unmap_sg(mvi->pdev, &task->smp_task.smp_resp, 1,
-			     PCI_DMA_FROMDEVICE);
-		pci_unmap_sg(mvi->pdev, &task->smp_task.smp_req, 1,
-			     PCI_DMA_TODEVICE);
-		break;
-
-	case SAS_PROTOCOL_SATA:
-	case SAS_PROTOCOL_STP:
-	case SAS_PROTOCOL_SSP:
-	default:
-		/* do nothing */
-		break;
-	}
-	list_del(&slot->list);
-	task->lldd_task = NULL;
-	slot->task = NULL;
-	slot->port = NULL;
-}
-
-static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
-			 u32 slot_idx)
-{
-	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
-	u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
-	u32 err_dw1 = le32_to_cpu(*(u32 *) (slot->response + 4));
-	int stat = SAM_CHECK_COND;
-
-	if (err_dw1 & SLOT_BSY_ERR) {
-		stat = SAS_QUEUE_FULL;
-		mvs_slot_reset(mvi, task, slot_idx);
-	}
-	switch (task->task_proto) {
-	case SAS_PROTOCOL_SSP:
-		break;
-	case SAS_PROTOCOL_SMP:
-		break;
-	case SAS_PROTOCOL_SATA:
-	case SAS_PROTOCOL_STP:
-	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
-		if (err_dw0 & TFILE_ERR)
-			stat = mvs_sata_done(mvi, task, slot_idx, 1);
-		break;
-	default:
-		break;
-	}
-
-	mvs_hexdump(16, (u8 *) slot->response, 0);
-	return stat;
-}
-
-static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
-{
-	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
-	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
-	struct sas_task *task = slot->task;
-	struct task_status_struct *tstat;
-	struct mvs_port *port;
-	bool aborted;
-	void *to;
-
-	if (unlikely(!task || !task->lldd_task))
-		return -1;
-
-	mvs_hba_cq_dump(mvi);
-
-	spin_lock(&task->task_state_lock);
-	aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
-	if (!aborted) {
-		task->task_state_flags &=
-		    ~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
-		task->task_state_flags |= SAS_TASK_STATE_DONE;
-	}
-	spin_unlock(&task->task_state_lock);
-
-	if (aborted) {
-		mvs_slot_task_free(mvi, task, slot, slot_idx);
-		mvs_slot_free(mvi, rx_desc);
-		return -1;
-	}
-
-	port = slot->port;
-	tstat = &task->task_status;
-	memset(tstat, 0, sizeof(*tstat));
-	tstat->resp = SAS_TASK_COMPLETE;
-
-	if (unlikely(!port->port_attached || flags)) {
-		mvs_slot_err(mvi, task, slot_idx);
-		if (!sas_protocol_ata(task->task_proto))
-			tstat->stat = SAS_PHY_DOWN;
-		goto out;
-	}
-
-	/* error info record present */
-	if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
-		tstat->stat = mvs_slot_err(mvi, task, slot_idx);
-		goto out;
-	}
-
-	switch (task->task_proto) {
-	case SAS_PROTOCOL_SSP:
-		/* hw says status == 0, datapres == 0 */
-		if (rx_desc & RXQ_GOOD) {
-			tstat->stat = SAM_GOOD;
-			tstat->resp = SAS_TASK_COMPLETE;
-		}
-		/* response frame present */
-		else if (rx_desc & RXQ_RSP) {
-			struct ssp_response_iu *iu =
-			    slot->response + sizeof(struct mvs_err_info);
-			sas_ssp_task_response(&mvi->pdev->dev, task, iu);
-		}
-
-		/* should never happen? */
-		else
-			tstat->stat = SAM_CHECK_COND;
-		break;
-
-	case SAS_PROTOCOL_SMP: {
-			struct scatterlist *sg_resp = &task->smp_task.smp_resp;
-			tstat->stat = SAM_GOOD;
-			to = kmap_atomic(sg_page(sg_resp), KM_IRQ0);
-			memcpy(to + sg_resp->offset,
-				slot->response + sizeof(struct mvs_err_info),
-				sg_dma_len(sg_resp));
-			kunmap_atomic(to, KM_IRQ0);
-			break;
-		}
-
-	case SAS_PROTOCOL_SATA:
-	case SAS_PROTOCOL_STP:
-	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
-			tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
-			break;
-		}
-
-	default:
-		tstat->stat = SAM_CHECK_COND;
-		break;
-	}
-
-out:
-	mvs_slot_task_free(mvi, task, slot, slot_idx);
-	if (unlikely(tstat->stat != SAS_QUEUE_FULL))
-		mvs_slot_free(mvi, rx_desc);
-
-	spin_unlock(&mvi->lock);
-	task->task_done(task);
-	spin_lock(&mvi->lock);
-	return tstat->stat;
-}
-
-static void mvs_release_task(struct mvs_info *mvi, int phy_no)
-{
-	struct list_head *pos, *n;
-	struct mvs_slot_info *slot;
-	struct mvs_phy *phy = &mvi->phy[phy_no];
-	struct mvs_port *port = phy->port;
-	u32 rx_desc;
-
-	if (!port)
-		return;
-
-	list_for_each_safe(pos, n, &port->list) {
-		slot = container_of(pos, struct mvs_slot_info, list);
-		rx_desc = (u32) (slot - mvi->slot_info);
-		mvs_slot_complete(mvi, rx_desc, 1);
-	}
-}
-
-static void mvs_int_full(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp, stat;
-	int i;
-
-	stat = mr32(INT_STAT);
-
-	mvs_int_rx(mvi, false);
-
-	for (i = 0; i < MVS_MAX_PORTS; i++) {
-		tmp = (stat >> i) & (CINT_PORT | CINT_PORT_STOPPED);
-		if (tmp)
-			mvs_int_port(mvi, i, tmp);
-	}
-
-	if (stat & CINT_SRS)
-		mvs_int_sata(mvi);
-
-	mw32(INT_STAT, stat);
-}
-
-static int mvs_int_rx(struct mvs_info *mvi, bool self_clear)
-{
-	void __iomem *regs = mvi->regs;
-	u32 rx_prod_idx, rx_desc;
-	bool attn = false;
-	struct pci_dev *pdev = mvi->pdev;
-
-	/* the first dword in the RX ring is special: it contains
-	 * a mirror of the hardware's RX producer index, so that
-	 * we don't have to stall the CPU reading that register.
-	 * The actual RX ring is offset by one dword, due to this.
-	 */
-	rx_prod_idx = mvi->rx_cons;
-	mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
-	if (mvi->rx_cons == 0xfff)	/* h/w hasn't touched RX ring yet */
-		return 0;
-
-	/* The CMPL_Q may come late, read from register and try again
-	* note: if coalescing is enabled,
-	* it will need to read from register every time for sure
-	*/
-	if (mvi->rx_cons == rx_prod_idx)
-		mvi->rx_cons = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
-
-	if (mvi->rx_cons == rx_prod_idx)
-		return 0;
-
-	while (mvi->rx_cons != rx_prod_idx) {
-
-		/* increment our internal RX consumer pointer */
-		rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
-
-		rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
-
-		if (likely(rx_desc & RXQ_DONE))
-			mvs_slot_complete(mvi, rx_desc, 0);
-		if (rx_desc & RXQ_ATTN) {
-			attn = true;
-			dev_printk(KERN_DEBUG, &pdev->dev, "ATTN %X\n",
-				rx_desc);
-		} else if (rx_desc & RXQ_ERR) {
-			if (!(rx_desc & RXQ_DONE))
-				mvs_slot_complete(mvi, rx_desc, 0);
-			dev_printk(KERN_DEBUG, &pdev->dev, "RXQ_ERR %X\n",
-				rx_desc);
-		} else if (rx_desc & RXQ_SLOT_RESET) {
-			dev_printk(KERN_DEBUG, &pdev->dev, "Slot reset[%X]\n",
-				rx_desc);
-			mvs_slot_free(mvi, rx_desc);
-		}
-	}
-
-	if (attn && self_clear)
-		mvs_int_full(mvi);
-
-	return 0;
-}
-
-#ifdef MVS_USE_TASKLET
-static void mvs_tasklet(unsigned long data)
-{
-	struct mvs_info *mvi = (struct mvs_info *) data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&mvi->lock, flags);
-
-#ifdef MVS_DISABLE_MSI
-	mvs_int_full(mvi);
-#else
-	mvs_int_rx(mvi, true);
-#endif
-	spin_unlock_irqrestore(&mvi->lock, flags);
-}
-#endif
-
-static irqreturn_t mvs_interrupt(int irq, void *opaque)
-{
-	struct mvs_info *mvi = opaque;
-	void __iomem *regs = mvi->regs;
-	u32 stat;
-
-	stat = mr32(GBL_INT_STAT);
-
-	if (stat == 0 || stat == 0xffffffff)
-		return IRQ_NONE;
-
-	/* clear CMD_CMPLT ASAP */
-	mw32_f(INT_STAT, CINT_DONE);
-
-#ifndef MVS_USE_TASKLET
-	spin_lock(&mvi->lock);
-
-	mvs_int_full(mvi);
-
-	spin_unlock(&mvi->lock);
-#else
-	tasklet_schedule(&mvi->tasklet);
-#endif
-	return IRQ_HANDLED;
-}
-
-#ifndef MVS_DISABLE_MSI
-static irqreturn_t mvs_msi_interrupt(int irq, void *opaque)
-{
-	struct mvs_info *mvi = opaque;
-
-#ifndef MVS_USE_TASKLET
-	spin_lock(&mvi->lock);
-
-	mvs_int_rx(mvi, true);
-
-	spin_unlock(&mvi->lock);
-#else
-	tasklet_schedule(&mvi->tasklet);
-#endif
-	return IRQ_HANDLED;
-}
-#endif
-
-struct mvs_task_exec_info {
-	struct sas_task *task;
-	struct mvs_cmd_hdr *hdr;
-	struct mvs_port *port;
-	u32 tag;
-	int n_elem;
-};
-
-static int mvs_task_prep_smp(struct mvs_info *mvi,
-			     struct mvs_task_exec_info *tei)
-{
-	int elem, rc, i;
-	struct sas_task *task = tei->task;
-	struct mvs_cmd_hdr *hdr = tei->hdr;
-	struct scatterlist *sg_req, *sg_resp;
-	u32 req_len, resp_len, tag = tei->tag;
-	void *buf_tmp;
-	u8 *buf_oaf;
-	dma_addr_t buf_tmp_dma;
-	struct mvs_prd *buf_prd;
-	struct scatterlist *sg;
-	struct mvs_slot_info *slot = &mvi->slot_info[tag];
-	struct asd_sas_port *sas_port = task->dev->port;
-	u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
-#if _MV_DUMP
-	u8 *buf_cmd;
-	void *from;
-#endif
-	/*
-	 * DMA-map SMP request, response buffers
-	 */
-	sg_req = &task->smp_task.smp_req;
-	elem = pci_map_sg(mvi->pdev, sg_req, 1, PCI_DMA_TODEVICE);
-	if (!elem)
-		return -ENOMEM;
-	req_len = sg_dma_len(sg_req);
-
-	sg_resp = &task->smp_task.smp_resp;
-	elem = pci_map_sg(mvi->pdev, sg_resp, 1, PCI_DMA_FROMDEVICE);
-	if (!elem) {
-		rc = -ENOMEM;
-		goto err_out;
-	}
-	resp_len = sg_dma_len(sg_resp);
-
-	/* must be in dwords */
-	if ((req_len & 0x3) || (resp_len & 0x3)) {
-		rc = -EINVAL;
-		goto err_out_2;
-	}
-
-	/*
-	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
-	 */
-
-	/* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
-	buf_tmp = slot->buf;
-	buf_tmp_dma = slot->buf_dma;
-
-#if _MV_DUMP
-	buf_cmd = buf_tmp;
-	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
-	buf_tmp += req_len;
-	buf_tmp_dma += req_len;
-	slot->cmd_size = req_len;
-#else
-	hdr->cmd_tbl = cpu_to_le64(sg_dma_address(sg_req));
-#endif
-
-	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
-	buf_oaf = buf_tmp;
-	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_OAF_SZ;
-	buf_tmp_dma += MVS_OAF_SZ;
-
-	/* region 3: PRD table ********************************************* */
-	buf_prd = buf_tmp;
-	if (tei->n_elem)
-		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
-	else
-		hdr->prd_tbl = 0;
-
-	i = sizeof(struct mvs_prd) * tei->n_elem;
-	buf_tmp += i;
-	buf_tmp_dma += i;
-
-	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
-	slot->response = buf_tmp;
-	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
-
-	/*
-	 * Fill in TX ring and command slot header
-	 */
-	slot->tx = mvi->tx_prod;
-	mvi->tx[mvi->tx_prod] = cpu_to_le32((TXQ_CMD_SMP << TXQ_CMD_SHIFT) |
-					TXQ_MODE_I | tag |
-					(sas_port->phy_mask << TXQ_PHY_SHIFT));
-
-	hdr->flags |= flags;
-	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | ((req_len - 4) / 4));
-	hdr->tags = cpu_to_le32(tag);
-	hdr->data_len = 0;
-
-	/* generate open address frame hdr (first 12 bytes) */
-	buf_oaf[0] = (1 << 7) | (0 << 4) | 0x01; /* initiator, SMP, ftype 1h */
-	buf_oaf[1] = task->dev->linkrate & 0xf;
-	*(u16 *)(buf_oaf + 2) = 0xFFFF;		/* SAS SPEC */
-	memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
-
-	/* fill in PRD (scatter/gather) table, if any */
-	for_each_sg(task->scatter, sg, tei->n_elem, i) {
-		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
-		buf_prd->len = cpu_to_le32(sg_dma_len(sg));
-		buf_prd++;
-	}
-
-#if _MV_DUMP
-	/* copy cmd table */
-	from = kmap_atomic(sg_page(sg_req), KM_IRQ0);
-	memcpy(buf_cmd, from + sg_req->offset, req_len);
-	kunmap_atomic(from, KM_IRQ0);
-#endif
-	return 0;
-
-err_out_2:
-	pci_unmap_sg(mvi->pdev, &tei->task->smp_task.smp_resp, 1,
-		     PCI_DMA_FROMDEVICE);
-err_out:
-	pci_unmap_sg(mvi->pdev, &tei->task->smp_task.smp_req, 1,
-		     PCI_DMA_TODEVICE);
-	return rc;
-}
-
-static void mvs_free_reg_set(struct mvs_info *mvi, struct mvs_port *port)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp, offs;
-	u8 *tfs = &port->taskfileset;
-
-	if (*tfs == MVS_ID_NOT_MAPPED)
-		return;
-
-	offs = 1U << ((*tfs & 0x0f) + PCS_EN_SATA_REG_SHIFT);
-	if (*tfs < 16) {
-		tmp = mr32(PCS);
-		mw32(PCS, tmp & ~offs);
-	} else {
-		tmp = mr32(CTL);
-		mw32(CTL, tmp & ~offs);
-	}
-
-	tmp = mr32(INT_STAT_SRS) & (1U << *tfs);
-	if (tmp)
-		mw32(INT_STAT_SRS, tmp);
-
-	*tfs = MVS_ID_NOT_MAPPED;
-}
-
-static u8 mvs_assign_reg_set(struct mvs_info *mvi, struct mvs_port *port)
-{
-	int i;
-	u32 tmp, offs;
-	void __iomem *regs = mvi->regs;
-
-	if (port->taskfileset != MVS_ID_NOT_MAPPED)
-		return 0;
-
-	tmp = mr32(PCS);
-
-	for (i = 0; i < mvi->chip->srs_sz; i++) {
-		if (i == 16)
-			tmp = mr32(CTL);
-		offs = 1U << ((i & 0x0f) + PCS_EN_SATA_REG_SHIFT);
-		if (!(tmp & offs)) {
-			port->taskfileset = i;
-
-			if (i < 16)
-				mw32(PCS, tmp | offs);
-			else
-				mw32(CTL, tmp | offs);
-			tmp = mr32(INT_STAT_SRS) & (1U << i);
-			if (tmp)
-				mw32(INT_STAT_SRS, tmp);
-			return 0;
-		}
-	}
-	return MVS_ID_NOT_MAPPED;
-}
-
-static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
-{
-	struct ata_queued_cmd *qc = task->uldd_task;
-
-	if (qc) {
-		if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
-			qc->tf.command == ATA_CMD_FPDMA_READ) {
-			*tag = qc->tag;
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-static int mvs_task_prep_ata(struct mvs_info *mvi,
-			     struct mvs_task_exec_info *tei)
-{
-	struct sas_task *task = tei->task;
-	struct domain_device *dev = task->dev;
-	struct mvs_cmd_hdr *hdr = tei->hdr;
-	struct asd_sas_port *sas_port = dev->port;
-	struct mvs_slot_info *slot;
-	struct scatterlist *sg;
-	struct mvs_prd *buf_prd;
-	struct mvs_port *port = tei->port;
-	u32 tag = tei->tag;
-	u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
-	void *buf_tmp;
-	u8 *buf_cmd, *buf_oaf;
-	dma_addr_t buf_tmp_dma;
-	u32 i, req_len, resp_len;
-	const u32 max_resp_len = SB_RFB_MAX;
-
-	if (mvs_assign_reg_set(mvi, port) == MVS_ID_NOT_MAPPED)
-		return -EBUSY;
-
-	slot = &mvi->slot_info[tag];
-	slot->tx = mvi->tx_prod;
-	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
-					(TXQ_CMD_STP << TXQ_CMD_SHIFT) |
-					(sas_port->phy_mask << TXQ_PHY_SHIFT) |
-					(port->taskfileset << TXQ_SRS_SHIFT));
-
-	if (task->ata_task.use_ncq)
-		flags |= MCH_FPDMA;
-	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) {
-		if (task->ata_task.fis.command != ATA_CMD_ID_ATAPI)
-			flags |= MCH_ATAPI;
-	}
-
-	/* FIXME: fill in port multiplier number */
-
-	hdr->flags = cpu_to_le32(flags);
-
-	/* FIXME: the low order order 5 bits for the TAG if enable NCQ */
-	if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr->tags))
-		task->ata_task.fis.sector_count |= hdr->tags << 3;
-	else
-		hdr->tags = cpu_to_le32(tag);
-	hdr->data_len = cpu_to_le32(task->total_xfer_len);
-
-	/*
-	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
-	 */
-
-	/* region 1: command table area (MVS_ATA_CMD_SZ bytes) ************** */
-	buf_cmd = buf_tmp = slot->buf;
-	buf_tmp_dma = slot->buf_dma;
-
-	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_ATA_CMD_SZ;
-	buf_tmp_dma += MVS_ATA_CMD_SZ;
-#if _MV_DUMP
-	slot->cmd_size = MVS_ATA_CMD_SZ;
-#endif
-
-	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
-	/* used for STP.  unused for SATA? */
-	buf_oaf = buf_tmp;
-	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_OAF_SZ;
-	buf_tmp_dma += MVS_OAF_SZ;
-
-	/* region 3: PRD table ********************************************* */
-	buf_prd = buf_tmp;
-	if (tei->n_elem)
-		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
-	else
-		hdr->prd_tbl = 0;
-
-	i = sizeof(struct mvs_prd) * tei->n_elem;
-	buf_tmp += i;
-	buf_tmp_dma += i;
-
-	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
-	/* FIXME: probably unused, for SATA.  kept here just in case
-	 * we get a STP/SATA error information record
-	 */
-	slot->response = buf_tmp;
-	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
-
-	req_len = sizeof(struct host_to_dev_fis);
-	resp_len = MVS_SLOT_BUF_SZ - MVS_ATA_CMD_SZ -
-	    sizeof(struct mvs_err_info) - i;
-
-	/* request, response lengths */
-	resp_len = min(resp_len, max_resp_len);
-	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
-
-	task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
-	/* fill in command FIS and ATAPI CDB */
-	memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
-	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
-		memcpy(buf_cmd + STP_ATAPI_CMD,
-			task->ata_task.atapi_packet, 16);
-
-	/* generate open address frame hdr (first 12 bytes) */
-	buf_oaf[0] = (1 << 7) | (2 << 4) | 0x1;	/* initiator, STP, ftype 1h */
-	buf_oaf[1] = task->dev->linkrate & 0xf;
-	*(u16 *)(buf_oaf + 2) = cpu_to_be16(tag);
-	memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
-
-	/* fill in PRD (scatter/gather) table, if any */
-	for_each_sg(task->scatter, sg, tei->n_elem, i) {
-		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
-		buf_prd->len = cpu_to_le32(sg_dma_len(sg));
-		buf_prd++;
-	}
-
-	return 0;
-}
-
-static int mvs_task_prep_ssp(struct mvs_info *mvi,
-			     struct mvs_task_exec_info *tei)
-{
-	struct sas_task *task = tei->task;
-	struct mvs_cmd_hdr *hdr = tei->hdr;
-	struct mvs_port *port = tei->port;
-	struct mvs_slot_info *slot;
-	struct scatterlist *sg;
-	struct mvs_prd *buf_prd;
-	struct ssp_frame_hdr *ssp_hdr;
-	void *buf_tmp;
-	u8 *buf_cmd, *buf_oaf, fburst = 0;
-	dma_addr_t buf_tmp_dma;
-	u32 flags;
-	u32 resp_len, req_len, i, tag = tei->tag;
-	const u32 max_resp_len = SB_RFB_MAX;
-	u8 phy_mask;
-
-	slot = &mvi->slot_info[tag];
-
-	phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
-		task->dev->port->phy_mask;
-	slot->tx = mvi->tx_prod;
-	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
-				(TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
-				(phy_mask << TXQ_PHY_SHIFT));
-
-	flags = MCH_RETRY;
-	if (task->ssp_task.enable_first_burst) {
-		flags |= MCH_FBURST;
-		fburst = (1 << 7);
-	}
-	hdr->flags = cpu_to_le32(flags |
-				 (tei->n_elem << MCH_PRD_LEN_SHIFT) |
-				 (MCH_SSP_FR_CMD << MCH_SSP_FR_TYPE_SHIFT));
-
-	hdr->tags = cpu_to_le32(tag);
-	hdr->data_len = cpu_to_le32(task->total_xfer_len);
-
-	/*
-	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
-	 */
-
-	/* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
-	buf_cmd = buf_tmp = slot->buf;
-	buf_tmp_dma = slot->buf_dma;
-
-	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_SSP_CMD_SZ;
-	buf_tmp_dma += MVS_SSP_CMD_SZ;
-#if _MV_DUMP
-	slot->cmd_size = MVS_SSP_CMD_SZ;
-#endif
-
-	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
-	buf_oaf = buf_tmp;
-	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_OAF_SZ;
-	buf_tmp_dma += MVS_OAF_SZ;
-
-	/* region 3: PRD table ********************************************* */
-	buf_prd = buf_tmp;
-	if (tei->n_elem)
-		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
-	else
-		hdr->prd_tbl = 0;
-
-	i = sizeof(struct mvs_prd) * tei->n_elem;
-	buf_tmp += i;
-	buf_tmp_dma += i;
-
-	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
-	slot->response = buf_tmp;
-	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
-
-	resp_len = MVS_SLOT_BUF_SZ - MVS_SSP_CMD_SZ - MVS_OAF_SZ -
-	    sizeof(struct mvs_err_info) - i;
-	resp_len = min(resp_len, max_resp_len);
-
-	req_len = sizeof(struct ssp_frame_hdr) + 28;
-
-	/* request, response lengths */
-	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
-
-	/* generate open address frame hdr (first 12 bytes) */
-	buf_oaf[0] = (1 << 7) | (1 << 4) | 0x1;	/* initiator, SSP, ftype 1h */
-	buf_oaf[1] = task->dev->linkrate & 0xf;
-	*(u16 *)(buf_oaf + 2) = cpu_to_be16(tag);
-	memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
-
-	/* fill in SSP frame header (Command Table.SSP frame header) */
-	ssp_hdr = (struct ssp_frame_hdr *)buf_cmd;
-	ssp_hdr->frame_type = SSP_COMMAND;
-	memcpy(ssp_hdr->hashed_dest_addr, task->dev->hashed_sas_addr,
-	       HASHED_SAS_ADDR_SIZE);
-	memcpy(ssp_hdr->hashed_src_addr,
-	       task->dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
-	ssp_hdr->tag = cpu_to_be16(tag);
-
-	/* fill in command frame IU */
-	buf_cmd += sizeof(*ssp_hdr);
-	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
-	buf_cmd[9] = fburst | task->ssp_task.task_attr |
-			(task->ssp_task.task_prio << 3);
-	memcpy(buf_cmd + 12, &task->ssp_task.cdb, 16);
-
-	/* fill in PRD (scatter/gather) table, if any */
-	for_each_sg(task->scatter, sg, tei->n_elem, i) {
-		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
-		buf_prd->len = cpu_to_le32(sg_dma_len(sg));
-		buf_prd++;
-	}
-
-	return 0;
-}
-
-static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags)
-{
-	struct domain_device *dev = task->dev;
-	struct mvs_info *mvi = dev->port->ha->lldd_ha;
-	struct pci_dev *pdev = mvi->pdev;
-	void __iomem *regs = mvi->regs;
-	struct mvs_task_exec_info tei;
-	struct sas_task *t = task;
-	struct mvs_slot_info *slot;
-	u32 tag = 0xdeadbeef, rc, n_elem = 0;
-	unsigned long flags;
-	u32 n = num, pass = 0;
-
-	spin_lock_irqsave(&mvi->lock, flags);
-	do {
-		dev = t->dev;
-		tei.port = &mvi->port[dev->port->id];
-
-		if (!tei.port->port_attached) {
-			if (sas_protocol_ata(t->task_proto)) {
-				rc = SAS_PHY_DOWN;
-				goto out_done;
-			} else {
-				struct task_status_struct *ts = &t->task_status;
-				ts->resp = SAS_TASK_UNDELIVERED;
-				ts->stat = SAS_PHY_DOWN;
-				t->task_done(t);
-				if (n > 1)
-					t = list_entry(t->list.next,
-							struct sas_task, list);
-				continue;
-			}
-		}
-
-		if (!sas_protocol_ata(t->task_proto)) {
-			if (t->num_scatter) {
-				n_elem = pci_map_sg(mvi->pdev, t->scatter,
-						    t->num_scatter,
-						    t->data_dir);
-				if (!n_elem) {
-					rc = -ENOMEM;
-					goto err_out;
-				}
-			}
-		} else {
-			n_elem = t->num_scatter;
-		}
-
-		rc = mvs_tag_alloc(mvi, &tag);
-		if (rc)
-			goto err_out;
-
-		slot = &mvi->slot_info[tag];
-		t->lldd_task = NULL;
-		slot->n_elem = n_elem;
-		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
-		tei.task = t;
-		tei.hdr = &mvi->slot[tag];
-		tei.tag = tag;
-		tei.n_elem = n_elem;
-
-		switch (t->task_proto) {
-		case SAS_PROTOCOL_SMP:
-			rc = mvs_task_prep_smp(mvi, &tei);
-			break;
-		case SAS_PROTOCOL_SSP:
-			rc = mvs_task_prep_ssp(mvi, &tei);
-			break;
-		case SAS_PROTOCOL_SATA:
-		case SAS_PROTOCOL_STP:
-		case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
-			rc = mvs_task_prep_ata(mvi, &tei);
-			break;
-		default:
-			dev_printk(KERN_ERR, &pdev->dev,
-				"unknown sas_task proto: 0x%x\n",
-				t->task_proto);
-			rc = -EINVAL;
-			break;
-		}
-
-		if (rc)
-			goto err_out_tag;
-
-		slot->task = t;
-		slot->port = tei.port;
-		t->lldd_task = (void *) slot;
-		list_add_tail(&slot->list, &slot->port->list);
-		/* TODO: select normal or high priority */
-
-		spin_lock(&t->task_state_lock);
-		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
-		spin_unlock(&t->task_state_lock);
-
-		mvs_hba_memory_dump(mvi, tag, t->task_proto);
-
-		++pass;
-		mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-		if (n > 1)
-			t = list_entry(t->list.next, struct sas_task, list);
-	} while (--n);
-
-	rc = 0;
-	goto out_done;
-
-err_out_tag:
-	mvs_tag_free(mvi, tag);
-err_out:
-	dev_printk(KERN_ERR, &pdev->dev, "mvsas exec failed[%d]!\n", rc);
-	if (!sas_protocol_ata(t->task_proto))
-		if (n_elem)
-			pci_unmap_sg(mvi->pdev, t->scatter, n_elem,
-				     t->data_dir);
-out_done:
-	if (pass)
-		mw32(TX_PROD_IDX, (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
-	spin_unlock_irqrestore(&mvi->lock, flags);
-	return rc;
-}
-
-static int mvs_task_abort(struct sas_task *task)
-{
-	int rc;
-	unsigned long flags;
-	struct mvs_info *mvi = task->dev->port->ha->lldd_ha;
-	struct pci_dev *pdev = mvi->pdev;
-	int tag;
-
-	spin_lock_irqsave(&task->task_state_lock, flags);
-	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
-		rc = TMF_RESP_FUNC_COMPLETE;
-		spin_unlock_irqrestore(&task->task_state_lock, flags);
-		goto out_done;
-	}
-	spin_unlock_irqrestore(&task->task_state_lock, flags);
-
-	switch (task->task_proto) {
-	case SAS_PROTOCOL_SMP:
-		dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! \n");
-		break;
-	case SAS_PROTOCOL_SSP:
-		dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! \n");
-		break;
-	case SAS_PROTOCOL_SATA:
-	case SAS_PROTOCOL_STP:
-	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:{
-		dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! \n");
-#if _MV_DUMP
-		dev_printk(KERN_DEBUG, &pdev->dev, "Dump D2H FIS: \n");
-		mvs_hexdump(sizeof(struct host_to_dev_fis),
-				(void *)&task->ata_task.fis, 0);
-		dev_printk(KERN_DEBUG, &pdev->dev, "Dump ATAPI Cmd : \n");
-		mvs_hexdump(16, task->ata_task.atapi_packet, 0);
-#endif
-		spin_lock_irqsave(&task->task_state_lock, flags);
-		if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) {
-			/* TODO */
-			;
-		}
-		spin_unlock_irqrestore(&task->task_state_lock, flags);
-		break;
-	}
-	default:
-		break;
-	}
-
-	if (mvs_find_tag(mvi, task, &tag)) {
-		spin_lock_irqsave(&mvi->lock, flags);
-		mvs_slot_task_free(mvi, task, &mvi->slot_info[tag], tag);
-		spin_unlock_irqrestore(&mvi->lock, flags);
-	}
-	if (!mvs_task_exec(task, 1, GFP_ATOMIC))
-		rc = TMF_RESP_FUNC_COMPLETE;
-	else
-		rc = TMF_RESP_FUNC_FAILED;
-out_done:
-	return rc;
-}
-
-static void mvs_free(struct mvs_info *mvi)
-{
-	int i;
-
-	if (!mvi)
-		return;
-
-	for (i = 0; i < MVS_SLOTS; i++) {
-		struct mvs_slot_info *slot = &mvi->slot_info[i];
-
-		if (slot->buf)
-			dma_free_coherent(&mvi->pdev->dev, MVS_SLOT_BUF_SZ,
-					  slot->buf, slot->buf_dma);
-	}
-
-	if (mvi->tx)
-		dma_free_coherent(&mvi->pdev->dev,
-				  sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
-				  mvi->tx, mvi->tx_dma);
-	if (mvi->rx_fis)
-		dma_free_coherent(&mvi->pdev->dev, MVS_RX_FISL_SZ,
-				  mvi->rx_fis, mvi->rx_fis_dma);
-	if (mvi->rx)
-		dma_free_coherent(&mvi->pdev->dev,
-				  sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
-				  mvi->rx, mvi->rx_dma);
-	if (mvi->slot)
-		dma_free_coherent(&mvi->pdev->dev,
-				  sizeof(*mvi->slot) * MVS_SLOTS,
-				  mvi->slot, mvi->slot_dma);
-#ifdef MVS_ENABLE_PERI
-	if (mvi->peri_regs)
-		iounmap(mvi->peri_regs);
-#endif
-	if (mvi->regs)
-		iounmap(mvi->regs);
-	if (mvi->shost)
-		scsi_host_put(mvi->shost);
-	kfree(mvi->sas.sas_port);
-	kfree(mvi->sas.sas_phy);
-	kfree(mvi);
-}
-
-/* FIXME: locking? */
-static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
-			   void *funcdata)
-{
-	struct mvs_info *mvi = sas_phy->ha->lldd_ha;
-	int rc = 0, phy_id = sas_phy->id;
-	u32 tmp;
-
-	tmp = mvs_read_phy_ctl(mvi, phy_id);
-
-	switch (func) {
-	case PHY_FUNC_SET_LINK_RATE:{
-			struct sas_phy_linkrates *rates = funcdata;
-			u32 lrmin = 0, lrmax = 0;
-
-			lrmin = (rates->minimum_linkrate << 8);
-			lrmax = (rates->maximum_linkrate << 12);
-
-			if (lrmin) {
-				tmp &= ~(0xf << 8);
-				tmp |= lrmin;
-			}
-			if (lrmax) {
-				tmp &= ~(0xf << 12);
-				tmp |= lrmax;
-			}
-			mvs_write_phy_ctl(mvi, phy_id, tmp);
-			break;
-		}
-
-	case PHY_FUNC_HARD_RESET:
-		if (tmp & PHY_RST_HARD)
-			break;
-		mvs_write_phy_ctl(mvi, phy_id, tmp | PHY_RST_HARD);
-		break;
-
-	case PHY_FUNC_LINK_RESET:
-		mvs_write_phy_ctl(mvi, phy_id, tmp | PHY_RST);
-		break;
-
-	case PHY_FUNC_DISABLE:
-	case PHY_FUNC_RELEASE_SPINUP_HOLD:
-	default:
-		rc = -EOPNOTSUPP;
-	}
-
-	return rc;
-}
-
-static void __devinit mvs_phy_init(struct mvs_info *mvi, int phy_id)
-{
-	struct mvs_phy *phy = &mvi->phy[phy_id];
-	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-
-	sas_phy->enabled = (phy_id < mvi->chip->n_phy) ? 1 : 0;
-	sas_phy->class = SAS;
-	sas_phy->iproto = SAS_PROTOCOL_ALL;
-	sas_phy->tproto = 0;
-	sas_phy->type = PHY_TYPE_PHYSICAL;
-	sas_phy->role = PHY_ROLE_INITIATOR;
-	sas_phy->oob_mode = OOB_NOT_CONNECTED;
-	sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
-
-	sas_phy->id = phy_id;
-	sas_phy->sas_addr = &mvi->sas_addr[0];
-	sas_phy->frame_rcvd = &phy->frame_rcvd[0];
-	sas_phy->ha = &mvi->sas;
-	sas_phy->lldd_phy = phy;
-}
-
-static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev,
-					    const struct pci_device_id *ent)
-{
-	struct mvs_info *mvi;
-	unsigned long res_start, res_len, res_flag;
-	struct asd_sas_phy **arr_phy;
-	struct asd_sas_port **arr_port;
-	const struct mvs_chip_info *chip = &mvs_chips[ent->driver_data];
-	int i;
-
-	/*
-	 * alloc and init our per-HBA mvs_info struct
-	 */
-
-	mvi = kzalloc(sizeof(*mvi), GFP_KERNEL);
-	if (!mvi)
-		return NULL;
-
-	spin_lock_init(&mvi->lock);
-#ifdef MVS_USE_TASKLET
-	tasklet_init(&mvi->tasklet, mvs_tasklet, (unsigned long)mvi);
-#endif
-	mvi->pdev = pdev;
-	mvi->chip = chip;
-
-	if (pdev->device == 0x6440 && pdev->revision == 0)
-		mvi->flags |= MVF_PHY_PWR_FIX;
-
-	/*
-	 * alloc and init SCSI, SAS glue
-	 */
-
-	mvi->shost = scsi_host_alloc(&mvs_sht, sizeof(void *));
-	if (!mvi->shost)
-		goto err_out;
-
-	arr_phy = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
-	arr_port = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
-	if (!arr_phy || !arr_port)
-		goto err_out;
-
-	for (i = 0; i < MVS_MAX_PHYS; i++) {
-		mvs_phy_init(mvi, i);
-		arr_phy[i] = &mvi->phy[i].sas_phy;
-		arr_port[i] = &mvi->port[i].sas_port;
-		mvi->port[i].taskfileset = MVS_ID_NOT_MAPPED;
-		mvi->port[i].wide_port_phymap = 0;
-		mvi->port[i].port_attached = 0;
-		INIT_LIST_HEAD(&mvi->port[i].list);
-	}
-
-	SHOST_TO_SAS_HA(mvi->shost) = &mvi->sas;
-	mvi->shost->transportt = mvs_stt;
-	mvi->shost->max_id = 21;
-	mvi->shost->max_lun = ~0;
-	mvi->shost->max_channel = 0;
-	mvi->shost->max_cmd_len = 16;
-
-	mvi->sas.sas_ha_name = DRV_NAME;
-	mvi->sas.dev = &pdev->dev;
-	mvi->sas.lldd_module = THIS_MODULE;
-	mvi->sas.sas_addr = &mvi->sas_addr[0];
-	mvi->sas.sas_phy = arr_phy;
-	mvi->sas.sas_port = arr_port;
-	mvi->sas.num_phys = chip->n_phy;
-	mvi->sas.lldd_max_execute_num = 1;
-	mvi->sas.lldd_queue_size = MVS_QUEUE_SIZE;
-	mvi->shost->can_queue = MVS_CAN_QUEUE;
-	mvi->shost->cmd_per_lun = MVS_SLOTS / mvi->sas.num_phys;
-	mvi->sas.lldd_ha = mvi;
-	mvi->sas.core.shost = mvi->shost;
-
-	mvs_tag_init(mvi);
-
-	/*
-	 * ioremap main and peripheral registers
-	 */
-
-#ifdef MVS_ENABLE_PERI
-	res_start = pci_resource_start(pdev, 2);
-	res_len = pci_resource_len(pdev, 2);
-	if (!res_start || !res_len)
-		goto err_out;
-
-	mvi->peri_regs = ioremap_nocache(res_start, res_len);
-	if (!mvi->peri_regs)
-		goto err_out;
-#endif
-
-	res_start = pci_resource_start(pdev, 4);
-	res_len = pci_resource_len(pdev, 4);
-	if (!res_start || !res_len)
-		goto err_out;
-
-	res_flag = pci_resource_flags(pdev, 4);
-	if (res_flag & IORESOURCE_CACHEABLE)
-		mvi->regs = ioremap(res_start, res_len);
-	else
-		mvi->regs = ioremap_nocache(res_start, res_len);
-
-	if (!mvi->regs)
-		goto err_out;
-
-	/*
-	 * alloc and init our DMA areas
-	 */
-
-	mvi->tx = dma_alloc_coherent(&pdev->dev,
-				     sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
-				     &mvi->tx_dma, GFP_KERNEL);
-	if (!mvi->tx)
-		goto err_out;
-	memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ);
-
-	mvi->rx_fis = dma_alloc_coherent(&pdev->dev, MVS_RX_FISL_SZ,
-					 &mvi->rx_fis_dma, GFP_KERNEL);
-	if (!mvi->rx_fis)
-		goto err_out;
-	memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
-
-	mvi->rx = dma_alloc_coherent(&pdev->dev,
-				     sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
-				     &mvi->rx_dma, GFP_KERNEL);
-	if (!mvi->rx)
-		goto err_out;
-	memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
-
-	mvi->rx[0] = cpu_to_le32(0xfff);
-	mvi->rx_cons = 0xfff;
-
-	mvi->slot = dma_alloc_coherent(&pdev->dev,
-				       sizeof(*mvi->slot) * MVS_SLOTS,
-				       &mvi->slot_dma, GFP_KERNEL);
-	if (!mvi->slot)
-		goto err_out;
-	memset(mvi->slot, 0, sizeof(*mvi->slot) * MVS_SLOTS);
-
-	for (i = 0; i < MVS_SLOTS; i++) {
-		struct mvs_slot_info *slot = &mvi->slot_info[i];
-
-		slot->buf = dma_alloc_coherent(&pdev->dev, MVS_SLOT_BUF_SZ,
-					       &slot->buf_dma, GFP_KERNEL);
-		if (!slot->buf)
-			goto err_out;
-		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
-	}
-
-	/* finally, read NVRAM to get our SAS address */
-	if (mvs_nvram_read(mvi, NVR_SAS_ADDR, &mvi->sas_addr, 8))
-		goto err_out;
-	return mvi;
-
-err_out:
-	mvs_free(mvi);
-	return NULL;
-}
-
-static u32 mvs_cr32(void __iomem *regs, u32 addr)
-{
-	mw32(CMD_ADDR, addr);
-	return mr32(CMD_DATA);
-}
-
-static void mvs_cw32(void __iomem *regs, u32 addr, u32 val)
-{
-	mw32(CMD_ADDR, addr);
-	mw32(CMD_DATA, val);
-}
-
-static u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port)
-{
-	void __iomem *regs = mvi->regs;
-	return (port < 4)?mr32(P0_SER_CTLSTAT + port * 4):
-		mr32(P4_SER_CTLSTAT + (port - 4) * 4);
-}
-
-static void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val)
-{
-	void __iomem *regs = mvi->regs;
-	if (port < 4)
-		mw32(P0_SER_CTLSTAT + port * 4, val);
-	else
-		mw32(P4_SER_CTLSTAT + (port - 4) * 4, val);
-}
-
-static u32 mvs_read_port(struct mvs_info *mvi, u32 off, u32 off2, u32 port)
-{
-	void __iomem *regs = mvi->regs + off;
-	void __iomem *regs2 = mvi->regs + off2;
-	return (port < 4)?readl(regs + port * 8):
-		readl(regs2 + (port - 4) * 8);
-}
-
-static void mvs_write_port(struct mvs_info *mvi, u32 off, u32 off2,
-				u32 port, u32 val)
-{
-	void __iomem *regs = mvi->regs + off;
-	void __iomem *regs2 = mvi->regs + off2;
-	if (port < 4)
-		writel(val, regs + port * 8);
-	else
-		writel(val, regs2 + (port - 4) * 8);
-}
-
-static u32 mvs_read_port_cfg_data(struct mvs_info *mvi, u32 port)
-{
-	return mvs_read_port(mvi, MVS_P0_CFG_DATA, MVS_P4_CFG_DATA, port);
-}
-
-static void mvs_write_port_cfg_data(struct mvs_info *mvi, u32 port, u32 val)
-{
-	mvs_write_port(mvi, MVS_P0_CFG_DATA, MVS_P4_CFG_DATA, port, val);
-}
-
-static void mvs_write_port_cfg_addr(struct mvs_info *mvi, u32 port, u32 addr)
-{
-	mvs_write_port(mvi, MVS_P0_CFG_ADDR, MVS_P4_CFG_ADDR, port, addr);
-}
-
-static u32 mvs_read_port_vsr_data(struct mvs_info *mvi, u32 port)
-{
-	return mvs_read_port(mvi, MVS_P0_VSR_DATA, MVS_P4_VSR_DATA, port);
-}
-
-static void mvs_write_port_vsr_data(struct mvs_info *mvi, u32 port, u32 val)
-{
-	mvs_write_port(mvi, MVS_P0_VSR_DATA, MVS_P4_VSR_DATA, port, val);
-}
-
-static void mvs_write_port_vsr_addr(struct mvs_info *mvi, u32 port, u32 addr)
-{
-	mvs_write_port(mvi, MVS_P0_VSR_ADDR, MVS_P4_VSR_ADDR, port, addr);
-}
-
-static u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port)
-{
-	return mvs_read_port(mvi, MVS_P0_INT_STAT, MVS_P4_INT_STAT, port);
-}
-
-static void mvs_write_port_irq_stat(struct mvs_info *mvi, u32 port, u32 val)
-{
-	mvs_write_port(mvi, MVS_P0_INT_STAT, MVS_P4_INT_STAT, port, val);
-}
-
-static u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port)
-{
-	return mvs_read_port(mvi, MVS_P0_INT_MASK, MVS_P4_INT_MASK, port);
-}
-
-static void mvs_write_port_irq_mask(struct mvs_info *mvi, u32 port, u32 val)
-{
-	mvs_write_port(mvi, MVS_P0_INT_MASK, MVS_P4_INT_MASK, port, val);
-}
-
-static void __devinit mvs_phy_hacks(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
-
-	/* workaround for SATA R-ERR, to ignore phy glitch */
-	tmp = mvs_cr32(regs, CMD_PHY_TIMER);
-	tmp &= ~(1 << 9);
-	tmp |= (1 << 10);
-	mvs_cw32(regs, CMD_PHY_TIMER, tmp);
-
-	/* enable retry 127 times */
-	mvs_cw32(regs, CMD_SAS_CTL1, 0x7f7f);
-
-	/* extend open frame timeout to max */
-	tmp = mvs_cr32(regs, CMD_SAS_CTL0);
-	tmp &= ~0xffff;
-	tmp |= 0x3fff;
-	mvs_cw32(regs, CMD_SAS_CTL0, tmp);
-
-	/* workaround for WDTIMEOUT , set to 550 ms */
-	mvs_cw32(regs, CMD_WD_TIMER, 0x86470);
-
-	/* not to halt for different port op during wideport link change */
-	mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d);
-
-	/* workaround for Seagate disk not-found OOB sequence, recv
-	 * COMINIT before sending out COMWAKE */
-	tmp = mvs_cr32(regs, CMD_PHY_MODE_21);
-	tmp &= 0x0000ffff;
-	tmp |= 0x00fa0000;
-	mvs_cw32(regs, CMD_PHY_MODE_21, tmp);
-
-	tmp = mvs_cr32(regs, CMD_PHY_TIMER);
-	tmp &= 0x1fffffff;
-	tmp |= (2U << 29);	/* 8 ms retry */
-	mvs_cw32(regs, CMD_PHY_TIMER, tmp);
-
-	/* TEST - for phy decoding error, adjust voltage levels */
-	mw32(P0_VSR_ADDR + 0, 0x8);
-	mw32(P0_VSR_DATA + 0, 0x2F0);
-
-	mw32(P0_VSR_ADDR + 8, 0x8);
-	mw32(P0_VSR_DATA + 8, 0x2F0);
-
-	mw32(P0_VSR_ADDR + 16, 0x8);
-	mw32(P0_VSR_DATA + 16, 0x2F0);
-
-	mw32(P0_VSR_ADDR + 24, 0x8);
-	mw32(P0_VSR_DATA + 24, 0x2F0);
-
-}
-
-static void mvs_enable_xmt(struct mvs_info *mvi, int PhyId)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
-
-	tmp = mr32(PCS);
-	if (mvi->chip->n_phy <= 4)
-		tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT);
-	else
-		tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT2);
-	mw32(PCS, tmp);
-}
-
-static void mvs_detect_porttype(struct mvs_info *mvi, int i)
-{
-	void __iomem *regs = mvi->regs;
-	u32 reg;
-	struct mvs_phy *phy = &mvi->phy[i];
-
-	/* TODO check & save device type */
-	reg = mr32(GBL_PORT_TYPE);
-
-	if (reg & MODE_SAS_SATA & (1 << i))
-		phy->phy_type |= PORT_TYPE_SAS;
-	else
-		phy->phy_type |= PORT_TYPE_SATA;
-}
-
-static void *mvs_get_d2h_reg(struct mvs_info *mvi, int i, void *buf)
-{
-	u32 *s = (u32 *) buf;
-
-	if (!s)
-		return NULL;
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG3);
-	s[3] = mvs_read_port_cfg_data(mvi, i);
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG2);
-	s[2] = mvs_read_port_cfg_data(mvi, i);
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG1);
-	s[1] = mvs_read_port_cfg_data(mvi, i);
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG0);
-	s[0] = mvs_read_port_cfg_data(mvi, i);
-
-	return (void *)s;
-}
-
-static u32 mvs_is_sig_fis_received(u32 irq_status)
-{
-	return irq_status & PHYEV_SIG_FIS;
-}
-
-static void mvs_update_wideport(struct mvs_info *mvi, int i)
-{
-	struct mvs_phy *phy = &mvi->phy[i];
-	struct mvs_port *port = phy->port;
-	int j, no;
-
-	for_each_phy(port->wide_port_phymap, no, j, mvi->chip->n_phy)
-		if (no & 1) {
-			mvs_write_port_cfg_addr(mvi, no, PHYR_WIDE_PORT);
-			mvs_write_port_cfg_data(mvi, no,
-						port->wide_port_phymap);
-		} else {
-			mvs_write_port_cfg_addr(mvi, no, PHYR_WIDE_PORT);
-			mvs_write_port_cfg_data(mvi, no, 0);
-		}
-}
-
-static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i)
-{
-	u32 tmp;
-	struct mvs_phy *phy = &mvi->phy[i];
-	struct mvs_port *port = phy->port;;
-
-	tmp = mvs_read_phy_ctl(mvi, i);
-
-	if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
-		if (!port)
-			phy->phy_attached = 1;
-		return tmp;
-	}
-
-	if (port) {
-		if (phy->phy_type & PORT_TYPE_SAS) {
-			port->wide_port_phymap &= ~(1U << i);
-			if (!port->wide_port_phymap)
-				port->port_attached = 0;
-			mvs_update_wideport(mvi, i);
-		} else if (phy->phy_type & PORT_TYPE_SATA)
-			port->port_attached = 0;
-		mvs_free_reg_set(mvi, phy->port);
-		phy->port = NULL;
-		phy->phy_attached = 0;
-		phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
-	}
-	return 0;
-}
-
-static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
-					int get_st)
-{
-	struct mvs_phy *phy = &mvi->phy[i];
-	struct pci_dev *pdev = mvi->pdev;
-	u32 tmp;
-	u64 tmp64;
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
-	phy->dev_info = mvs_read_port_cfg_data(mvi, i);
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_HI);
-	phy->dev_sas_addr = (u64) mvs_read_port_cfg_data(mvi, i) << 32;
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_LO);
-	phy->dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-
-	if (get_st) {
-		phy->irq_status = mvs_read_port_irq_stat(mvi, i);
-		phy->phy_status = mvs_is_phy_ready(mvi, i);
-	}
-
-	if (phy->phy_status) {
-		u32 phy_st;
-		struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
-
-		mvs_write_port_cfg_addr(mvi, i, PHYR_PHY_STAT);
-		phy_st = mvs_read_port_cfg_data(mvi, i);
-
-		sas_phy->linkrate =
-			(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
-				PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
-		phy->minimum_linkrate =
-			(phy->phy_status &
-				PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
-		phy->maximum_linkrate =
-			(phy->phy_status &
-				PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
-
-		if (phy->phy_type & PORT_TYPE_SAS) {
-			/* Updated attached_sas_addr */
-			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
-			phy->att_dev_sas_addr =
-				(u64) mvs_read_port_cfg_data(mvi, i) << 32;
-			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
-			phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
-			phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
-			phy->identify.device_type =
-			    phy->att_dev_info & PORT_DEV_TYPE_MASK;
-
-			if (phy->identify.device_type == SAS_END_DEV)
-				phy->identify.target_port_protocols =
-							SAS_PROTOCOL_SSP;
-			else if (phy->identify.device_type != NO_DEVICE)
-				phy->identify.target_port_protocols =
-							SAS_PROTOCOL_SMP;
-			if (phy_st & PHY_OOB_DTCTD)
-				sas_phy->oob_mode = SAS_OOB_MODE;
-			phy->frame_rcvd_size =
-			    sizeof(struct sas_identify_frame);
-		} else if (phy->phy_type & PORT_TYPE_SATA) {
-			phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
-			if (mvs_is_sig_fis_received(phy->irq_status)) {
-				phy->att_dev_sas_addr = i;	/* temp */
-				if (phy_st & PHY_OOB_DTCTD)
-					sas_phy->oob_mode = SATA_OOB_MODE;
-				phy->frame_rcvd_size =
-				    sizeof(struct dev_to_host_fis);
-				mvs_get_d2h_reg(mvi, i,
-						(void *)sas_phy->frame_rcvd);
-			} else {
-				dev_printk(KERN_DEBUG, &pdev->dev,
-					"No sig fis\n");
-				phy->phy_type &= ~(PORT_TYPE_SATA);
-				goto out_done;
-			}
-		}
-		tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
-		memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
-
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"phy[%d] Get Attached Address 0x%llX ,"
-			" SAS Address 0x%llX\n",
-			i,
-			(unsigned long long)phy->att_dev_sas_addr,
-			(unsigned long long)phy->dev_sas_addr);
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"Rate = %x , type = %d\n",
-			sas_phy->linkrate, phy->phy_type);
-
-		/* workaround for HW phy decoding error on 1.5g disk drive */
-		mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
-		tmp = mvs_read_port_vsr_data(mvi, i);
-		if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
-		     PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
-			SAS_LINK_RATE_1_5_GBPS)
-			tmp &= ~PHY_MODE6_LATECLK;
-		else
-			tmp |= PHY_MODE6_LATECLK;
-		mvs_write_port_vsr_data(mvi, i, tmp);
-
-	}
-out_done:
-	if (get_st)
-		mvs_write_port_irq_stat(mvi, i, phy->irq_status);
-}
-
-static void mvs_port_formed(struct asd_sas_phy *sas_phy)
-{
-	struct sas_ha_struct *sas_ha = sas_phy->ha;
-	struct mvs_info *mvi = sas_ha->lldd_ha;
-	struct asd_sas_port *sas_port = sas_phy->port;
-	struct mvs_phy *phy = sas_phy->lldd_phy;
-	struct mvs_port *port = &mvi->port[sas_port->id];
-	unsigned long flags;
-
-	spin_lock_irqsave(&mvi->lock, flags);
-	port->port_attached = 1;
-	phy->port = port;
-	port->taskfileset = MVS_ID_NOT_MAPPED;
-	if (phy->phy_type & PORT_TYPE_SAS) {
-		port->wide_port_phymap = sas_port->phy_mask;
-		mvs_update_wideport(mvi, sas_phy->id);
-	}
-	spin_unlock_irqrestore(&mvi->lock, flags);
-}
-
-static int mvs_I_T_nexus_reset(struct domain_device *dev)
-{
-	return TMF_RESP_FUNC_FAILED;
-}
-
-static int __devinit mvs_hw_init(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	int i;
-	u32 tmp, cctl;
-
-	/* make sure interrupts are masked immediately (paranoia) */
-	mw32(GBL_CTL, 0);
-	tmp = mr32(GBL_CTL);
-
-	/* Reset Controller */
-	if (!(tmp & HBA_RST)) {
-		if (mvi->flags & MVF_PHY_PWR_FIX) {
-			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
-			tmp &= ~PCTL_PWR_ON;
-			tmp |= PCTL_OFF;
-			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
-
-			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
-			tmp &= ~PCTL_PWR_ON;
-			tmp |= PCTL_OFF;
-			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
-		}
-
-		/* global reset, incl. COMRESET/H_RESET_N (self-clearing) */
-		mw32_f(GBL_CTL, HBA_RST);
-	}
-
-	/* wait for reset to finish; timeout is just a guess */
-	i = 1000;
-	while (i-- > 0) {
-		msleep(10);
-
-		if (!(mr32(GBL_CTL) & HBA_RST))
-			break;
-	}
-	if (mr32(GBL_CTL) & HBA_RST) {
-		dev_printk(KERN_ERR, &mvi->pdev->dev, "HBA reset failed\n");
-		return -EBUSY;
-	}
-
-	/* Init Chip */
-	/* make sure RST is set; HBA_RST /should/ have done that for us */
-	cctl = mr32(CTL);
-	if (cctl & CCTL_RST)
-		cctl &= ~CCTL_RST;
-	else
-		mw32_f(CTL, cctl | CCTL_RST);
-
-	/* write to device control _AND_ device status register? - A.C. */
-	pci_read_config_dword(mvi->pdev, PCR_DEV_CTRL, &tmp);
-	tmp &= ~PRD_REQ_MASK;
-	tmp |= PRD_REQ_SIZE;
-	pci_write_config_dword(mvi->pdev, PCR_DEV_CTRL, tmp);
-
-	pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
-	tmp |= PCTL_PWR_ON;
-	tmp &= ~PCTL_OFF;
-	pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
-
-	pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
-	tmp |= PCTL_PWR_ON;
-	tmp &= ~PCTL_OFF;
-	pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
-
-	mw32_f(CTL, cctl);
-
-	/* reset control */
-	mw32(PCS, 0);		/*MVS_PCS */
-
-	mvs_phy_hacks(mvi);
-
-	mw32(CMD_LIST_LO, mvi->slot_dma);
-	mw32(CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
-
-	mw32(RX_FIS_LO, mvi->rx_fis_dma);
-	mw32(RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
-
-	mw32(TX_CFG, MVS_CHIP_SLOT_SZ);
-	mw32(TX_LO, mvi->tx_dma);
-	mw32(TX_HI, (mvi->tx_dma >> 16) >> 16);
-
-	mw32(RX_CFG, MVS_RX_RING_SZ);
-	mw32(RX_LO, mvi->rx_dma);
-	mw32(RX_HI, (mvi->rx_dma >> 16) >> 16);
-
-	/* enable auto port detection */
-	mw32(GBL_PORT_TYPE, MODE_AUTO_DET_EN);
-	msleep(1100);
-	/* init and reset phys */
-	for (i = 0; i < mvi->chip->n_phy; i++) {
-		u32 lo = be32_to_cpu(*(u32 *)&mvi->sas_addr[4]);
-		u32 hi = be32_to_cpu(*(u32 *)&mvi->sas_addr[0]);
-
-		mvs_detect_porttype(mvi, i);
-
-		/* set phy local SAS address */
-		mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_LO);
-		mvs_write_port_cfg_data(mvi, i, lo);
-		mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_HI);
-		mvs_write_port_cfg_data(mvi, i, hi);
-
-		/* reset phy */
-		tmp = mvs_read_phy_ctl(mvi, i);
-		tmp |= PHY_RST;
-		mvs_write_phy_ctl(mvi, i, tmp);
-	}
-
-	msleep(100);
-
-	for (i = 0; i < mvi->chip->n_phy; i++) {
-		/* clear phy int status */
-		tmp = mvs_read_port_irq_stat(mvi, i);
-		tmp &= ~PHYEV_SIG_FIS;
-		mvs_write_port_irq_stat(mvi, i, tmp);
-
-		/* set phy int mask */
-		tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH | PHYEV_UNASSOC_FIS |
-			PHYEV_ID_DONE | PHYEV_DEC_ERR;
-		mvs_write_port_irq_mask(mvi, i, tmp);
-
-		msleep(100);
-		mvs_update_phyinfo(mvi, i, 1);
-		mvs_enable_xmt(mvi, i);
-	}
-
-	/* FIXME: update wide port bitmaps */
-
-	/* little endian for open address and command table, etc. */
-	/* A.C.
-	 * it seems that ( from the spec ) turning on big-endian won't
-	 * do us any good on big-endian machines, need further confirmation
-	 */
-	cctl = mr32(CTL);
-	cctl |= CCTL_ENDIAN_CMD;
-	cctl |= CCTL_ENDIAN_DATA;
-	cctl &= ~CCTL_ENDIAN_OPEN;
-	cctl |= CCTL_ENDIAN_RSP;
-	mw32_f(CTL, cctl);
-
-	/* reset CMD queue */
-	tmp = mr32(PCS);
-	tmp |= PCS_CMD_RST;
-	mw32(PCS, tmp);
-	/* interrupt coalescing may cause missing HW interrput in some case,
-	 * and the max count is 0x1ff, while our max slot is 0x200,
-	 * it will make count 0.
-	 */
-	tmp = 0;
-	mw32(INT_COAL, tmp);
-
-	tmp = 0x100;
-	mw32(INT_COAL_TMOUT, tmp);
-
-	/* ladies and gentlemen, start your engines */
-	mw32(TX_CFG, 0);
-	mw32(TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
-	mw32(RX_CFG, MVS_RX_RING_SZ | RX_EN);
-	/* enable CMD/CMPL_Q/RESP mode */
-	mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN);
-
-	/* enable completion queue interrupt */
-	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS);
-	mw32(INT_MASK, tmp);
-
-	/* Enable SRS interrupt */
-	mw32(INT_MASK_SRS, 0xFF);
-	return 0;
-}
-
-static void __devinit mvs_print_info(struct mvs_info *mvi)
-{
-	struct pci_dev *pdev = mvi->pdev;
-	static int printed_version;
-
-	if (!printed_version++)
-		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
-
-	dev_printk(KERN_INFO, &pdev->dev, "%u phys, addr %llx\n",
-		   mvi->chip->n_phy, SAS_ADDR(mvi->sas_addr));
-}
-
-static int __devinit mvs_pci_init(struct pci_dev *pdev,
-				  const struct pci_device_id *ent)
-{
-	int rc;
-	struct mvs_info *mvi;
-	irq_handler_t irq_handler = mvs_interrupt;
-
-	rc = pci_enable_device(pdev);
-	if (rc)
-		return rc;
-
-	pci_set_master(pdev);
-
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc)
-		goto err_out_disable;
-
-	rc = pci_go_64(pdev);
-	if (rc)
-		goto err_out_regions;
-
-	mvi = mvs_alloc(pdev, ent);
-	if (!mvi) {
-		rc = -ENOMEM;
-		goto err_out_regions;
-	}
-
-	rc = mvs_hw_init(mvi);
-	if (rc)
-		goto err_out_mvi;
-
-#ifndef MVS_DISABLE_MSI
-	if (!pci_enable_msi(pdev)) {
-		u32 tmp;
-		void __iomem *regs = mvi->regs;
-		mvi->flags |= MVF_MSI;
-		irq_handler = mvs_msi_interrupt;
-		tmp = mr32(PCS);
-		mw32(PCS, tmp | PCS_SELF_CLEAR);
-	}
-#endif
-
-	rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME, mvi);
-	if (rc)
-		goto err_out_msi;
-
-	rc = scsi_add_host(mvi->shost, &pdev->dev);
-	if (rc)
-		goto err_out_irq;
-
-	rc = sas_register_ha(&mvi->sas);
-	if (rc)
-		goto err_out_shost;
-
-	pci_set_drvdata(pdev, mvi);
-
-	mvs_print_info(mvi);
-
-	mvs_hba_interrupt_enable(mvi);
-
-	scsi_scan_host(mvi->shost);
-
-	return 0;
-
-err_out_shost:
-	scsi_remove_host(mvi->shost);
-err_out_irq:
-	free_irq(pdev->irq, mvi);
-err_out_msi:
-	if (mvi->flags |= MVF_MSI)
-		pci_disable_msi(pdev);
-err_out_mvi:
-	mvs_free(mvi);
-err_out_regions:
-	pci_release_regions(pdev);
-err_out_disable:
-	pci_disable_device(pdev);
-	return rc;
-}
-
-static void __devexit mvs_pci_remove(struct pci_dev *pdev)
-{
-	struct mvs_info *mvi = pci_get_drvdata(pdev);
-
-	pci_set_drvdata(pdev, NULL);
-
-	if (mvi) {
-		sas_unregister_ha(&mvi->sas);
-		mvs_hba_interrupt_disable(mvi);
-		sas_remove_host(mvi->shost);
-		scsi_remove_host(mvi->shost);
-
-		free_irq(pdev->irq, mvi);
-		if (mvi->flags & MVF_MSI)
-			pci_disable_msi(pdev);
-		mvs_free(mvi);
-		pci_release_regions(pdev);
-	}
-	pci_disable_device(pdev);
-}
-
-static struct sas_domain_function_template mvs_transport_ops = {
-	.lldd_execute_task	= mvs_task_exec,
-	.lldd_control_phy	= mvs_phy_control,
-	.lldd_abort_task	= mvs_task_abort,
-	.lldd_port_formed	= mvs_port_formed,
-	.lldd_I_T_nexus_reset	= mvs_I_T_nexus_reset,
-};
-
-static struct pci_device_id __devinitdata mvs_pci_table[] = {
-	{ PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
-	{ PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
-	{
-		.vendor 	= PCI_VENDOR_ID_MARVELL,
-		.device 	= 0x6440,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= 0x6480,
-		.class		= 0,
-		.class_mask	= 0,
-		.driver_data	= chip_6480,
-	},
-	{ PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
-	{ PCI_VDEVICE(MARVELL, 0x6480), chip_6480 },
-
-	{ }	/* terminate list */
-};
-
-static struct pci_driver mvs_pci_driver = {
-	.name		= DRV_NAME,
-	.id_table	= mvs_pci_table,
-	.probe		= mvs_pci_init,
-	.remove		= __devexit_p(mvs_pci_remove),
-};
-
-static int __init mvs_init(void)
-{
-	int rc;
-
-	mvs_stt = sas_domain_attach_transport(&mvs_transport_ops);
-	if (!mvs_stt)
-		return -ENOMEM;
-
-	rc = pci_register_driver(&mvs_pci_driver);
-	if (rc)
-		goto err_out;
-
-	return 0;
-
-err_out:
-	sas_release_transport(mvs_stt);
-	return rc;
-}
-
-static void __exit mvs_exit(void)
-{
-	pci_unregister_driver(&mvs_pci_driver);
-	sas_release_transport(mvs_stt);
-}
-
-module_init(mvs_init);
-module_exit(mvs_exit);
-
-MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
-MODULE_DESCRIPTION("Marvell 88SE6440 SAS/SATA controller driver");
-MODULE_VERSION(DRV_VERSION);
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, mvs_pci_table);
diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig
new file mode 100644
index 0000000..6de7af2
--- /dev/null
+++ b/drivers/scsi/mvsas/Kconfig
@@ -0,0 +1,42 @@
+#
+# Kernel configuration file for 88SE64XX/88SE94XX SAS/SATA driver.
+#
+# Copyright 2007 Red Hat, Inc.
+# Copyright 2008 Marvell. <kewei@marvell.com>
+#
+# This file is licensed under GPLv2.
+#
+# This file is part of the 88SE64XX/88SE94XX driver.
+#
+# The 88SE64XX/88SE94XX driver is free software; you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; version 2 of the
+# License.
+#
+# The 88SE64XX/88SE94XX driver is distributed in the hope that it will be
+# useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with 88SE64XX/88SE94XX Driver; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#
+
+config SCSI_MVSAS
+	tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support"
+	depends on PCI
+	select SCSI_SAS_LIBSAS
+	select FW_LOADER
+	help
+		This driver supports Marvell's SAS/SATA 3Gb/s PCI-E 88SE64XX and 6Gb/s
+		PCI-E 88SE94XX chip based host adapters.
+
+config SCSI_MVSAS_DEBUG
+	bool "Compile in debug mode"
+	default y
+	depends on SCSI_MVSAS
+	help
+		Compiles the 88SE64XX/88SE94XX driver in debug mode.  In debug mode,
+		the driver prints some messages to the console.
diff --git a/drivers/scsi/mvsas/Makefile b/drivers/scsi/mvsas/Makefile
new file mode 100644
index 0000000..52ac426
--- /dev/null
+++ b/drivers/scsi/mvsas/Makefile
@@ -0,0 +1,32 @@
+#
+# Makefile for Marvell 88SE64xx/88SE84xx SAS/SATA driver.
+#
+# Copyright 2007 Red Hat, Inc.
+# Copyright 2008 Marvell. <kewei@marvell.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+
+ifeq ($(CONFIG_SCSI_MVSAS_DEBUG),y)
+	EXTRA_CFLAGS += -DMV_DEBUG
+endif
+
+obj-$(CONFIG_SCSI_MVSAS) += mvsas.o
+mvsas-y +=  mv_init.o  \
+           mv_sas.o   \
+           mv_64xx.o  \
+           mv_94xx.o
diff --git a/drivers/scsi/mvsas/mv_64xx.c b/drivers/scsi/mvsas/mv_64xx.c
new file mode 100644
index 0000000..10a5077
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_64xx.c
@@ -0,0 +1,793 @@
+/*
+ * Marvell 88SE64xx hardware specific
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include "mv_sas.h"
+#include "mv_64xx.h"
+#include "mv_chips.h"
+
+static void mvs_64xx_detect_porttype(struct mvs_info *mvi, int i)
+{
+	void __iomem *regs = mvi->regs;
+	u32 reg;
+	struct mvs_phy *phy = &mvi->phy[i];
+
+	/* TODO check & save device type */
+	reg = mr32(MVS_GBL_PORT_TYPE);
+	phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+	if (reg & MODE_SAS_SATA & (1 << i))
+		phy->phy_type |= PORT_TYPE_SAS;
+	else
+		phy->phy_type |= PORT_TYPE_SATA;
+}
+
+static void __devinit mvs_64xx_enable_xmt(struct mvs_info *mvi, int phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(MVS_PCS);
+	if (mvi->chip->n_phy <= 4)
+		tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT);
+	else
+		tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT2);
+	mw32(MVS_PCS, tmp);
+}
+
+static void __devinit mvs_64xx_phy_hacks(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+
+	mvs_phy_hacks(mvi);
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		/* TEST - for phy decoding error, adjust voltage levels */
+		mw32(MVS_P0_VSR_ADDR + 0, 0x8);
+		mw32(MVS_P0_VSR_DATA + 0, 0x2F0);
+
+		mw32(MVS_P0_VSR_ADDR + 8, 0x8);
+		mw32(MVS_P0_VSR_DATA + 8, 0x2F0);
+
+		mw32(MVS_P0_VSR_ADDR + 16, 0x8);
+		mw32(MVS_P0_VSR_DATA + 16, 0x2F0);
+
+		mw32(MVS_P0_VSR_ADDR + 24, 0x8);
+		mw32(MVS_P0_VSR_DATA + 24, 0x2F0);
+	} else {
+		int i;
+		/* disable auto port detection */
+		mw32(MVS_GBL_PORT_TYPE, 0);
+		for (i = 0; i < mvi->chip->n_phy; i++) {
+			mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE7);
+			mvs_write_port_vsr_data(mvi, i, 0x90000000);
+			mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE9);
+			mvs_write_port_vsr_data(mvi, i, 0x50f2);
+			mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE11);
+			mvs_write_port_vsr_data(mvi, i, 0x0e);
+		}
+	}
+}
+
+static void mvs_64xx_stp_reset(struct mvs_info *mvi, u32 phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 reg, tmp;
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		if (phy_id < 4)
+			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &reg);
+		else
+			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &reg);
+
+	} else
+		reg = mr32(MVS_PHY_CTL);
+
+	tmp = reg;
+	if (phy_id < 4)
+		tmp |= (1U << phy_id) << PCTL_LINK_OFFS;
+	else
+		tmp |= (1U << (phy_id - 4)) << PCTL_LINK_OFFS;
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		if (phy_id < 4) {
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+			mdelay(10);
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, reg);
+		} else {
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+			mdelay(10);
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, reg);
+		}
+	} else {
+		mw32(MVS_PHY_CTL, tmp);
+		mdelay(10);
+		mw32(MVS_PHY_CTL, reg);
+	}
+}
+
+static void mvs_64xx_phy_reset(struct mvs_info *mvi, u32 phy_id, int hard)
+{
+	u32 tmp;
+	tmp = mvs_read_port_irq_stat(mvi, phy_id);
+	tmp &= ~PHYEV_RDY_CH;
+	mvs_write_port_irq_stat(mvi, phy_id, tmp);
+	tmp = mvs_read_phy_ctl(mvi, phy_id);
+	if (hard)
+		tmp |= PHY_RST_HARD;
+	else
+		tmp |= PHY_RST;
+	mvs_write_phy_ctl(mvi, phy_id, tmp);
+	if (hard) {
+		do {
+			tmp = mvs_read_phy_ctl(mvi, phy_id);
+		} while (tmp & PHY_RST_HARD);
+	}
+}
+
+static int __devinit mvs_64xx_chip_reset(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+	int i;
+
+	/* make sure interrupts are masked immediately (paranoia) */
+	mw32(MVS_GBL_CTL, 0);
+	tmp = mr32(MVS_GBL_CTL);
+
+	/* Reset Controller */
+	if (!(tmp & HBA_RST)) {
+		if (mvi->flags & MVF_PHY_PWR_FIX) {
+			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
+			tmp &= ~PCTL_PWR_OFF;
+			tmp |= PCTL_PHY_DSBL;
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+
+			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
+			tmp &= ~PCTL_PWR_OFF;
+			tmp |= PCTL_PHY_DSBL;
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+		}
+	}
+
+	/* make sure interrupts are masked immediately (paranoia) */
+	mw32(MVS_GBL_CTL, 0);
+	tmp = mr32(MVS_GBL_CTL);
+
+	/* Reset Controller */
+	if (!(tmp & HBA_RST)) {
+		/* global reset, incl. COMRESET/H_RESET_N (self-clearing) */
+		mw32_f(MVS_GBL_CTL, HBA_RST);
+	}
+
+	/* wait for reset to finish; timeout is just a guess */
+	i = 1000;
+	while (i-- > 0) {
+		msleep(10);
+
+		if (!(mr32(MVS_GBL_CTL) & HBA_RST))
+			break;
+	}
+	if (mr32(MVS_GBL_CTL) & HBA_RST) {
+		dev_printk(KERN_ERR, mvi->dev, "HBA reset failed\n");
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static void mvs_64xx_phy_disable(struct mvs_info *mvi, u32 phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		u32 offs;
+		if (phy_id < 4)
+			offs = PCR_PHY_CTL;
+		else {
+			offs = PCR_PHY_CTL2;
+			phy_id -= 4;
+		}
+		pci_read_config_dword(mvi->pdev, offs, &tmp);
+		tmp |= 1U << (PCTL_PHY_DSBL_OFFS + phy_id);
+		pci_write_config_dword(mvi->pdev, offs, tmp);
+	} else {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp |= 1U << (PCTL_PHY_DSBL_OFFS + phy_id);
+		mw32(MVS_PHY_CTL, tmp);
+	}
+}
+
+static void mvs_64xx_phy_enable(struct mvs_info *mvi, u32 phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		u32 offs;
+		if (phy_id < 4)
+			offs = PCR_PHY_CTL;
+		else {
+			offs = PCR_PHY_CTL2;
+			phy_id -= 4;
+		}
+		pci_read_config_dword(mvi->pdev, offs, &tmp);
+		tmp &= ~(1U << (PCTL_PHY_DSBL_OFFS + phy_id));
+		pci_write_config_dword(mvi->pdev, offs, tmp);
+	} else {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~(1U << (PCTL_PHY_DSBL_OFFS + phy_id));
+		mw32(MVS_PHY_CTL, tmp);
+	}
+}
+
+static int __devinit mvs_64xx_init(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	int i;
+	u32 tmp, cctl;
+
+	if (mvi->pdev && mvi->pdev->revision == 0)
+		mvi->flags |= MVF_PHY_PWR_FIX;
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		mvs_show_pcie_usage(mvi);
+		tmp = mvs_64xx_chip_reset(mvi);
+		if (tmp)
+			return tmp;
+	} else {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp |= PCTL_PHY_DSBL;
+		mw32(MVS_PHY_CTL, tmp);
+	}
+
+	/* Init Chip */
+	/* make sure RST is set; HBA_RST /should/ have done that for us */
+	cctl = mr32(MVS_CTL) & 0xFFFF;
+	if (cctl & CCTL_RST)
+		cctl &= ~CCTL_RST;
+	else
+		mw32_f(MVS_CTL, cctl | CCTL_RST);
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		/* write to device control _AND_ device status register */
+		pci_read_config_dword(mvi->pdev, PCR_DEV_CTRL, &tmp);
+		tmp &= ~PRD_REQ_MASK;
+		tmp |= PRD_REQ_SIZE;
+		pci_write_config_dword(mvi->pdev, PCR_DEV_CTRL, tmp);
+
+		pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp &= ~PCTL_PHY_DSBL;
+		pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+
+		pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
+		tmp &= PCTL_PWR_OFF;
+		tmp &= ~PCTL_PHY_DSBL;
+		pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+	} else {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp |= PCTL_COM_ON;
+		tmp &= ~PCTL_PHY_DSBL;
+		tmp |= PCTL_LINK_RST;
+		mw32(MVS_PHY_CTL, tmp);
+		msleep(100);
+		tmp &= ~PCTL_LINK_RST;
+		mw32(MVS_PHY_CTL, tmp);
+		msleep(100);
+	}
+
+	/* reset control */
+	mw32(MVS_PCS, 0);		/* MVS_PCS */
+	/* init phys */
+	mvs_64xx_phy_hacks(mvi);
+
+	/* enable auto port detection */
+	mw32(MVS_GBL_PORT_TYPE, MODE_AUTO_DET_EN);
+
+	mw32(MVS_CMD_LIST_LO, mvi->slot_dma);
+	mw32(MVS_CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
+
+	mw32(MVS_RX_FIS_LO, mvi->rx_fis_dma);
+	mw32(MVS_RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
+
+	mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ);
+	mw32(MVS_TX_LO, mvi->tx_dma);
+	mw32(MVS_TX_HI, (mvi->tx_dma >> 16) >> 16);
+
+	mw32(MVS_RX_CFG, MVS_RX_RING_SZ);
+	mw32(MVS_RX_LO, mvi->rx_dma);
+	mw32(MVS_RX_HI, (mvi->rx_dma >> 16) >> 16);
+
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		/* set phy local SAS address */
+		/* should set little endian SAS address to 64xx chip */
+		mvs_set_sas_addr(mvi, i, PHYR_ADDR_LO, PHYR_ADDR_HI,
+				cpu_to_be64(mvi->phy[i].dev_sas_addr));
+
+		mvs_64xx_enable_xmt(mvi, i);
+
+		mvs_64xx_phy_reset(mvi, i, 1);
+		msleep(500);
+		mvs_64xx_detect_porttype(mvi, i);
+	}
+	if (mvi->flags & MVF_FLAG_SOC) {
+		/* set select registers */
+		writel(0x0E008000, regs + 0x000);
+		writel(0x59000008, regs + 0x004);
+		writel(0x20, regs + 0x008);
+		writel(0x20, regs + 0x00c);
+		writel(0x20, regs + 0x010);
+		writel(0x20, regs + 0x014);
+		writel(0x20, regs + 0x018);
+		writel(0x20, regs + 0x01c);
+	}
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		/* clear phy int status */
+		tmp = mvs_read_port_irq_stat(mvi, i);
+		tmp &= ~PHYEV_SIG_FIS;
+		mvs_write_port_irq_stat(mvi, i, tmp);
+
+		/* set phy int mask */
+		tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH | PHYEV_UNASSOC_FIS |
+			PHYEV_ID_DONE | PHYEV_DCDR_ERR | PHYEV_CRC_ERR |
+			PHYEV_DEC_ERR;
+		mvs_write_port_irq_mask(mvi, i, tmp);
+
+		msleep(100);
+		mvs_update_phyinfo(mvi, i, 1);
+	}
+
+	/* FIXME: update wide port bitmaps */
+
+	/* little endian for open address and command table, etc. */
+	/*
+	 * it seems that ( from the spec ) turning on big-endian won't
+	 * do us any good on big-endian machines, need further confirmation
+	 */
+	cctl = mr32(MVS_CTL);
+	cctl |= CCTL_ENDIAN_CMD;
+	cctl |= CCTL_ENDIAN_DATA;
+	cctl &= ~CCTL_ENDIAN_OPEN;
+	cctl |= CCTL_ENDIAN_RSP;
+	mw32_f(MVS_CTL, cctl);
+
+	/* reset CMD queue */
+	tmp = mr32(MVS_PCS);
+	tmp |= PCS_CMD_RST;
+	mw32(MVS_PCS, tmp);
+	/* interrupt coalescing may cause missing HW interrput in some case,
+	 * and the max count is 0x1ff, while our max slot is 0x200,
+	 * it will make count 0.
+	 */
+	tmp = 0;
+	mw32(MVS_INT_COAL, tmp);
+
+	tmp = 0x100;
+	mw32(MVS_INT_COAL_TMOUT, tmp);
+
+	/* ladies and gentlemen, start your engines */
+	mw32(MVS_TX_CFG, 0);
+	mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
+	mw32(MVS_RX_CFG, MVS_RX_RING_SZ | RX_EN);
+	/* enable CMD/CMPL_Q/RESP mode */
+	mw32(MVS_PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN |
+		PCS_CMD_EN | PCS_CMD_STOP_ERR);
+
+	/* enable completion queue interrupt */
+	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS | CINT_CI_STOP |
+		CINT_DMA_PCIE);
+
+	mw32(MVS_INT_MASK, tmp);
+
+	/* Enable SRS interrupt */
+	mw32(MVS_INT_MASK_SRS_0, 0xFFFF);
+
+	return 0;
+}
+
+static int mvs_64xx_ioremap(struct mvs_info *mvi)
+{
+	if (!mvs_ioremap(mvi, 4, 2))
+		return 0;
+	return -1;
+}
+
+static void mvs_64xx_iounmap(struct mvs_info *mvi)
+{
+	mvs_iounmap(mvi->regs);
+	mvs_iounmap(mvi->regs_ex);
+}
+
+static void mvs_64xx_interrupt_enable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(MVS_GBL_CTL);
+	mw32(MVS_GBL_CTL, tmp | INT_EN);
+}
+
+static void mvs_64xx_interrupt_disable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(MVS_GBL_CTL);
+	mw32(MVS_GBL_CTL, tmp & ~INT_EN);
+}
+
+static u32 mvs_64xx_isr_status(struct mvs_info *mvi, int irq)
+{
+	void __iomem *regs = mvi->regs;
+	u32 stat;
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		stat = mr32(MVS_GBL_INT_STAT);
+
+		if (stat == 0 || stat == 0xffffffff)
+			return 0;
+	} else
+		stat = 1;
+	return stat;
+}
+
+static irqreturn_t mvs_64xx_isr(struct mvs_info *mvi, int irq, u32 stat)
+{
+	void __iomem *regs = mvi->regs;
+
+	/* clear CMD_CMPLT ASAP */
+	mw32_f(MVS_INT_STAT, CINT_DONE);
+#ifndef MVS_USE_TASKLET
+	spin_lock(&mvi->lock);
+#endif
+	mvs_int_full(mvi);
+#ifndef MVS_USE_TASKLET
+	spin_unlock(&mvi->lock);
+#endif
+	return IRQ_HANDLED;
+}
+
+static void mvs_64xx_command_active(struct mvs_info *mvi, u32 slot_idx)
+{
+	u32 tmp;
+	mvs_cw32(mvi, 0x40 + (slot_idx >> 3), 1 << (slot_idx % 32));
+	mvs_cw32(mvi, 0x00 + (slot_idx >> 3), 1 << (slot_idx % 32));
+	do {
+		tmp = mvs_cr32(mvi, 0x00 + (slot_idx >> 3));
+	} while (tmp & 1 << (slot_idx % 32));
+	do {
+		tmp = mvs_cr32(mvi, 0x40 + (slot_idx >> 3));
+	} while (tmp & 1 << (slot_idx % 32));
+}
+
+static void mvs_64xx_issue_stop(struct mvs_info *mvi, enum mvs_port_type type,
+				u32 tfs)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	if (type == PORT_TYPE_SATA) {
+		tmp = mr32(MVS_INT_STAT_SRS_0) | (1U << tfs);
+		mw32(MVS_INT_STAT_SRS_0, tmp);
+	}
+	mw32(MVS_INT_STAT, CINT_CI_STOP);
+	tmp = mr32(MVS_PCS) | 0xFF00;
+	mw32(MVS_PCS, tmp);
+}
+
+static void mvs_64xx_free_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp, offs;
+
+	if (*tfs == MVS_ID_NOT_MAPPED)
+		return;
+
+	offs = 1U << ((*tfs & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+	if (*tfs < 16) {
+		tmp = mr32(MVS_PCS);
+		mw32(MVS_PCS, tmp & ~offs);
+	} else {
+		tmp = mr32(MVS_CTL);
+		mw32(MVS_CTL, tmp & ~offs);
+	}
+
+	tmp = mr32(MVS_INT_STAT_SRS_0) & (1U << *tfs);
+	if (tmp)
+		mw32(MVS_INT_STAT_SRS_0, tmp);
+
+	*tfs = MVS_ID_NOT_MAPPED;
+	return;
+}
+
+static u8 mvs_64xx_assign_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+	int i;
+	u32 tmp, offs;
+	void __iomem *regs = mvi->regs;
+
+	if (*tfs != MVS_ID_NOT_MAPPED)
+		return 0;
+
+	tmp = mr32(MVS_PCS);
+
+	for (i = 0; i < mvi->chip->srs_sz; i++) {
+		if (i == 16)
+			tmp = mr32(MVS_CTL);
+		offs = 1U << ((i & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+		if (!(tmp & offs)) {
+			*tfs = i;
+
+			if (i < 16)
+				mw32(MVS_PCS, tmp | offs);
+			else
+				mw32(MVS_CTL, tmp | offs);
+			tmp = mr32(MVS_INT_STAT_SRS_0) & (1U << i);
+			if (tmp)
+				mw32(MVS_INT_STAT_SRS_0, tmp);
+			return 0;
+		}
+	}
+	return MVS_ID_NOT_MAPPED;
+}
+
+void mvs_64xx_make_prd(struct scatterlist *scatter, int nr, void *prd)
+{
+	int i;
+	struct scatterlist *sg;
+	struct mvs_prd *buf_prd = prd;
+	for_each_sg(scatter, sg, nr, i) {
+		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+		buf_prd->len = cpu_to_le32(sg_dma_len(sg));
+		buf_prd++;
+	}
+}
+
+static int mvs_64xx_oob_done(struct mvs_info *mvi, int i)
+{
+	u32 phy_st;
+	mvs_write_port_cfg_addr(mvi, i,
+			PHYR_PHY_STAT);
+	phy_st = mvs_read_port_cfg_data(mvi, i);
+	if (phy_st & PHY_OOB_DTCTD)
+		return 1;
+	return 0;
+}
+
+static void mvs_64xx_fix_phy_info(struct mvs_info *mvi, int i,
+				struct sas_identify_frame *id)
+
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+	sas_phy->linkrate =
+		(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+			PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
+
+	phy->minimum_linkrate =
+		(phy->phy_status &
+			PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
+	phy->maximum_linkrate =
+		(phy->phy_status &
+			PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
+
+	mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
+	phy->dev_info = mvs_read_port_cfg_data(mvi, i);
+
+	mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
+	phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
+
+	mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
+	phy->att_dev_sas_addr =
+	     (u64) mvs_read_port_cfg_data(mvi, i) << 32;
+	mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
+	phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
+	phy->att_dev_sas_addr = SAS_ADDR(&phy->att_dev_sas_addr);
+}
+
+static void mvs_64xx_phy_work_around(struct mvs_info *mvi, int i)
+{
+	u32 tmp;
+	struct mvs_phy *phy = &mvi->phy[i];
+	/* workaround for HW phy decoding error on 1.5g disk drive */
+	mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
+	tmp = mvs_read_port_vsr_data(mvi, i);
+	if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+	     PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
+		SAS_LINK_RATE_1_5_GBPS)
+		tmp &= ~PHY_MODE6_LATECLK;
+	else
+		tmp |= PHY_MODE6_LATECLK;
+	mvs_write_port_vsr_data(mvi, i, tmp);
+}
+
+void mvs_64xx_phy_set_link_rate(struct mvs_info *mvi, u32 phy_id,
+			struct sas_phy_linkrates *rates)
+{
+	u32 lrmin = 0, lrmax = 0;
+	u32 tmp;
+
+	tmp = mvs_read_phy_ctl(mvi, phy_id);
+	lrmin = (rates->minimum_linkrate << 8);
+	lrmax = (rates->maximum_linkrate << 12);
+
+	if (lrmin) {
+		tmp &= ~(0xf << 8);
+		tmp |= lrmin;
+	}
+	if (lrmax) {
+		tmp &= ~(0xf << 12);
+		tmp |= lrmax;
+	}
+	mvs_write_phy_ctl(mvi, phy_id, tmp);
+	mvs_64xx_phy_reset(mvi, phy_id, 1);
+}
+
+static void mvs_64xx_clear_active_cmds(struct mvs_info *mvi)
+{
+	u32 tmp;
+	void __iomem *regs = mvi->regs;
+	tmp = mr32(MVS_PCS);
+	mw32(MVS_PCS, tmp & 0xFFFF);
+	mw32(MVS_PCS, tmp);
+	tmp = mr32(MVS_CTL);
+	mw32(MVS_CTL, tmp & 0xFFFF);
+	mw32(MVS_CTL, tmp);
+}
+
+
+u32 mvs_64xx_spi_read_data(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs_ex;
+	return ior32(SPI_DATA_REG_64XX);
+}
+
+void mvs_64xx_spi_write_data(struct mvs_info *mvi, u32 data)
+{
+	void __iomem *regs = mvi->regs_ex;
+	 iow32(SPI_DATA_REG_64XX, data);
+}
+
+
+int mvs_64xx_spi_buildcmd(struct mvs_info *mvi,
+			u32      *dwCmd,
+			u8       cmd,
+			u8       read,
+			u8       length,
+			u32      addr
+			)
+{
+	u32  dwTmp;
+
+	dwTmp = ((u32)cmd << 24) | ((u32)length << 19);
+	if (read)
+		dwTmp |= 1U<<23;
+
+	if (addr != MV_MAX_U32) {
+		dwTmp |= 1U<<22;
+		dwTmp |= (addr & 0x0003FFFF);
+	}
+
+	*dwCmd = dwTmp;
+	return 0;
+}
+
+
+int mvs_64xx_spi_issuecmd(struct mvs_info *mvi, u32 cmd)
+{
+	void __iomem *regs = mvi->regs_ex;
+	int     retry;
+
+	for (retry = 0; retry < 1; retry++) {
+		iow32(SPI_CTRL_REG_64XX, SPI_CTRL_VENDOR_ENABLE);
+		iow32(SPI_CMD_REG_64XX, cmd);
+		iow32(SPI_CTRL_REG_64XX,
+			SPI_CTRL_VENDOR_ENABLE | SPI_CTRL_SPISTART);
+	}
+
+	return 0;
+}
+
+int mvs_64xx_spi_waitdataready(struct mvs_info *mvi, u32 timeout)
+{
+	void __iomem *regs = mvi->regs_ex;
+	u32 i, dwTmp;
+
+	for (i = 0; i < timeout; i++) {
+		dwTmp = ior32(SPI_CTRL_REG_64XX);
+		if (!(dwTmp & SPI_CTRL_SPISTART))
+			return 0;
+		msleep(10);
+	}
+
+	return -1;
+}
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+void mvs_64xx_fix_dma(dma_addr_t buf_dma, int buf_len, int from, void *prd)
+{
+	int i;
+	struct mvs_prd *buf_prd = prd;
+	buf_prd	+= from;
+	for (i = 0; i < MAX_SG_ENTRY - from; i++) {
+		buf_prd->addr = cpu_to_le64(buf_dma);
+		buf_prd->len = cpu_to_le32(buf_len);
+		++buf_prd;
+	}
+}
+#endif
+
+const struct mvs_dispatch mvs_64xx_dispatch = {
+	"mv64xx",
+	mvs_64xx_init,
+	NULL,
+	mvs_64xx_ioremap,
+	mvs_64xx_iounmap,
+	mvs_64xx_isr,
+	mvs_64xx_isr_status,
+	mvs_64xx_interrupt_enable,
+	mvs_64xx_interrupt_disable,
+	mvs_read_phy_ctl,
+	mvs_write_phy_ctl,
+	mvs_read_port_cfg_data,
+	mvs_write_port_cfg_data,
+	mvs_write_port_cfg_addr,
+	mvs_read_port_vsr_data,
+	mvs_write_port_vsr_data,
+	mvs_write_port_vsr_addr,
+	mvs_read_port_irq_stat,
+	mvs_write_port_irq_stat,
+	mvs_read_port_irq_mask,
+	mvs_write_port_irq_mask,
+	mvs_get_sas_addr,
+	mvs_64xx_command_active,
+	mvs_64xx_issue_stop,
+	mvs_start_delivery,
+	mvs_rx_update,
+	mvs_int_full,
+	mvs_64xx_assign_reg_set,
+	mvs_64xx_free_reg_set,
+	mvs_get_prd_size,
+	mvs_get_prd_count,
+	mvs_64xx_make_prd,
+	mvs_64xx_detect_porttype,
+	mvs_64xx_oob_done,
+	mvs_64xx_fix_phy_info,
+	mvs_64xx_phy_work_around,
+	mvs_64xx_phy_set_link_rate,
+	mvs_hw_max_link_rate,
+	mvs_64xx_phy_disable,
+	mvs_64xx_phy_enable,
+	mvs_64xx_phy_reset,
+	mvs_64xx_stp_reset,
+	mvs_64xx_clear_active_cmds,
+	mvs_64xx_spi_read_data,
+	mvs_64xx_spi_write_data,
+	mvs_64xx_spi_buildcmd,
+	mvs_64xx_spi_issuecmd,
+	mvs_64xx_spi_waitdataready,
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	mvs_64xx_fix_dma,
+#endif
+};
+
diff --git a/drivers/scsi/mvsas/mv_64xx.h b/drivers/scsi/mvsas/mv_64xx.h
new file mode 100644
index 0000000..42e947d
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_64xx.h
@@ -0,0 +1,151 @@
+/*
+ * Marvell 88SE64xx hardware specific head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MVS64XX_REG_H_
+#define _MVS64XX_REG_H_
+
+#include <linux/types.h>
+
+#define MAX_LINK_RATE		SAS_LINK_RATE_3_0_GBPS
+
+/* enhanced mode registers (BAR4) */
+enum hw_registers {
+	MVS_GBL_CTL		= 0x04,  /* global control */
+	MVS_GBL_INT_STAT	= 0x08,  /* global irq status */
+	MVS_GBL_PI		= 0x0C,  /* ports implemented bitmask */
+
+	MVS_PHY_CTL		= 0x40,  /* SOC PHY Control */
+	MVS_PORTS_IMP		= 0x9C,  /* SOC Port Implemented */
+
+	MVS_GBL_PORT_TYPE	= 0xa0,  /* port type */
+
+	MVS_CTL			= 0x100, /* SAS/SATA port configuration */
+	MVS_PCS			= 0x104, /* SAS/SATA port control/status */
+	MVS_CMD_LIST_LO		= 0x108, /* cmd list addr */
+	MVS_CMD_LIST_HI		= 0x10C,
+	MVS_RX_FIS_LO		= 0x110, /* RX FIS list addr */
+	MVS_RX_FIS_HI		= 0x114,
+
+	MVS_TX_CFG		= 0x120, /* TX configuration */
+	MVS_TX_LO		= 0x124, /* TX (delivery) ring addr */
+	MVS_TX_HI		= 0x128,
+
+	MVS_TX_PROD_IDX		= 0x12C, /* TX producer pointer */
+	MVS_TX_CONS_IDX		= 0x130, /* TX consumer pointer (RO) */
+	MVS_RX_CFG		= 0x134, /* RX configuration */
+	MVS_RX_LO		= 0x138, /* RX (completion) ring addr */
+	MVS_RX_HI		= 0x13C,
+	MVS_RX_CONS_IDX		= 0x140, /* RX consumer pointer (RO) */
+
+	MVS_INT_COAL		= 0x148, /* Int coalescing config */
+	MVS_INT_COAL_TMOUT	= 0x14C, /* Int coalescing timeout */
+	MVS_INT_STAT		= 0x150, /* Central int status */
+	MVS_INT_MASK		= 0x154, /* Central int enable */
+	MVS_INT_STAT_SRS_0	= 0x158, /* SATA register set status */
+	MVS_INT_MASK_SRS_0	= 0x15C,
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_INT_STAT		= 0x160, /* port0 interrupt status */
+	MVS_P0_INT_MASK		= 0x164, /* port0 interrupt mask */
+					 /* ports 5-7 follow after this */
+	MVS_P4_INT_STAT		= 0x200, /* Port4 interrupt status */
+	MVS_P4_INT_MASK		= 0x204, /* Port4 interrupt enable mask */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_SER_CTLSTAT	= 0x180, /* port0 serial control/status */
+					 /* ports 5-7 follow after this */
+	MVS_P4_SER_CTLSTAT	= 0x220, /* port4 serial control/status */
+
+	MVS_CMD_ADDR		= 0x1B8, /* Command register port (addr) */
+	MVS_CMD_DATA		= 0x1BC, /* Command register port (data) */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_CFG_ADDR		= 0x1C0, /* port0 phy register address */
+	MVS_P0_CFG_DATA		= 0x1C4, /* port0 phy register data */
+					 /* ports 5-7 follow after this */
+	MVS_P4_CFG_ADDR		= 0x230, /* Port4 config address */
+	MVS_P4_CFG_DATA		= 0x234, /* Port4 config data */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_VSR_ADDR		= 0x1E0, /* port0 VSR address */
+	MVS_P0_VSR_DATA		= 0x1E4, /* port0 VSR data */
+					 /* ports 5-7 follow after this */
+	MVS_P4_VSR_ADDR		= 0x250, /* port4 VSR addr */
+	MVS_P4_VSR_DATA		= 0x254, /* port4 VSR data */
+};
+
+enum pci_cfg_registers {
+	PCR_PHY_CTL		= 0x40,
+	PCR_PHY_CTL2		= 0x90,
+	PCR_DEV_CTRL		= 0xE8,
+	PCR_LINK_STAT		= 0xF2,
+};
+
+/*  SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+	VSR_PHY_STAT		= 0x00, /* Phy Status */
+	VSR_PHY_MODE1		= 0x01, /* phy tx */
+	VSR_PHY_MODE2		= 0x02, /* tx scc */
+	VSR_PHY_MODE3		= 0x03, /* pll */
+	VSR_PHY_MODE4		= 0x04, /* VCO */
+	VSR_PHY_MODE5		= 0x05, /* Rx */
+	VSR_PHY_MODE6		= 0x06, /* CDR */
+	VSR_PHY_MODE7		= 0x07, /* Impedance */
+	VSR_PHY_MODE8		= 0x08, /* Voltage */
+	VSR_PHY_MODE9		= 0x09, /* Test */
+	VSR_PHY_MODE10		= 0x0A, /* Power */
+	VSR_PHY_MODE11		= 0x0B, /* Phy Mode */
+	VSR_PHY_VS0		= 0x0C, /* Vednor Specific 0 */
+	VSR_PHY_VS1		= 0x0D, /* Vednor Specific 1 */
+};
+
+enum chip_register_bits {
+	PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0xF << 8),
+	PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0xF << 12),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (16),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
+			(0xF << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
+};
+
+#define MAX_SG_ENTRY		64
+
+struct mvs_prd {
+	__le64			addr;		/* 64-bit buffer address */
+	__le32			reserved;
+	__le32			len;		/* 16-bit length */
+};
+
+#define SPI_CTRL_REG				0xc0
+#define SPI_CTRL_VENDOR_ENABLE		(1U<<29)
+#define SPI_CTRL_SPIRDY         		(1U<<22)
+#define SPI_CTRL_SPISTART			(1U<<20)
+
+#define SPI_CMD_REG		0xc4
+#define SPI_DATA_REG		0xc8
+
+#define SPI_CTRL_REG_64XX		0x10
+#define SPI_CMD_REG_64XX		0x14
+#define SPI_DATA_REG_64XX		0x18
+
+#endif
diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c
new file mode 100644
index 0000000..0940fae
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_94xx.c
@@ -0,0 +1,672 @@
+/*
+ * Marvell 88SE94xx hardware specific
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include "mv_sas.h"
+#include "mv_94xx.h"
+#include "mv_chips.h"
+
+static void mvs_94xx_detect_porttype(struct mvs_info *mvi, int i)
+{
+	u32 reg;
+	struct mvs_phy *phy = &mvi->phy[i];
+	u32 phy_status;
+
+	mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE3);
+	reg = mvs_read_port_vsr_data(mvi, i);
+	phy_status = ((reg & 0x3f0000) >> 16) & 0xff;
+	phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+	switch (phy_status) {
+	case 0x10:
+		phy->phy_type |= PORT_TYPE_SAS;
+		break;
+	case 0x1d:
+	default:
+		phy->phy_type |= PORT_TYPE_SATA;
+		break;
+	}
+}
+
+static void __devinit mvs_94xx_enable_xmt(struct mvs_info *mvi, int phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(MVS_PCS);
+	tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT2);
+	mw32(MVS_PCS, tmp);
+}
+
+static void mvs_94xx_phy_reset(struct mvs_info *mvi, u32 phy_id, int hard)
+{
+	u32 tmp;
+
+	tmp = mvs_read_port_irq_stat(mvi, phy_id);
+	tmp &= ~PHYEV_RDY_CH;
+	mvs_write_port_irq_stat(mvi, phy_id, tmp);
+	if (hard) {
+		tmp = mvs_read_phy_ctl(mvi, phy_id);
+		tmp |= PHY_RST_HARD;
+		mvs_write_phy_ctl(mvi, phy_id, tmp);
+		do {
+			tmp = mvs_read_phy_ctl(mvi, phy_id);
+		} while (tmp & PHY_RST_HARD);
+	} else {
+		mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_STAT);
+		tmp = mvs_read_port_vsr_data(mvi, phy_id);
+		tmp |= PHY_RST;
+		mvs_write_port_vsr_data(mvi, phy_id, tmp);
+	}
+}
+
+static void mvs_94xx_phy_disable(struct mvs_info *mvi, u32 phy_id)
+{
+	u32 tmp;
+	mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
+	tmp = mvs_read_port_vsr_data(mvi, phy_id);
+	mvs_write_port_vsr_data(mvi, phy_id, tmp | 0x00800000);
+}
+
+static void mvs_94xx_phy_enable(struct mvs_info *mvi, u32 phy_id)
+{
+	mvs_write_port_vsr_addr(mvi, phy_id, 0x1B4);
+	mvs_write_port_vsr_data(mvi, phy_id, 0x8300ffc1);
+	mvs_write_port_vsr_addr(mvi, phy_id, 0x104);
+	mvs_write_port_vsr_data(mvi, phy_id, 0x00018080);
+	mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
+	mvs_write_port_vsr_data(mvi, phy_id, 0x00207fff);
+}
+
+static int __devinit mvs_94xx_init(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	int i;
+	u32 tmp, cctl;
+
+	mvs_show_pcie_usage(mvi);
+	if (mvi->flags & MVF_FLAG_SOC) {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp |= PCTL_PHY_DSBL;
+		mw32(MVS_PHY_CTL, tmp);
+	}
+
+	/* Init Chip */
+	/* make sure RST is set; HBA_RST /should/ have done that for us */
+	cctl = mr32(MVS_CTL) & 0xFFFF;
+	if (cctl & CCTL_RST)
+		cctl &= ~CCTL_RST;
+	else
+		mw32_f(MVS_CTL, cctl | CCTL_RST);
+
+	if (mvi->flags & MVF_FLAG_SOC) {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp |= PCTL_COM_ON;
+		tmp &= ~PCTL_PHY_DSBL;
+		tmp |= PCTL_LINK_RST;
+		mw32(MVS_PHY_CTL, tmp);
+		msleep(100);
+		tmp &= ~PCTL_LINK_RST;
+		mw32(MVS_PHY_CTL, tmp);
+		msleep(100);
+	}
+
+	/* reset control */
+	mw32(MVS_PCS, 0);		/* MVS_PCS */
+	mw32(MVS_STP_REG_SET_0, 0);
+	mw32(MVS_STP_REG_SET_1, 0);
+
+	/* init phys */
+	mvs_phy_hacks(mvi);
+
+	/* disable Multiplexing, enable phy implemented */
+	mw32(MVS_PORTS_IMP, 0xFF);
+
+
+	mw32(MVS_PA_VSR_ADDR, 0x00000104);
+	mw32(MVS_PA_VSR_PORT, 0x00018080);
+	mw32(MVS_PA_VSR_ADDR, VSR_PHY_MODE8);
+	mw32(MVS_PA_VSR_PORT, 0x0084ffff);
+
+	/* set LED blink when IO*/
+	mw32(MVS_PA_VSR_ADDR, 0x00000030);
+	tmp = mr32(MVS_PA_VSR_PORT);
+	tmp &= 0xFFFF00FF;
+	tmp |= 0x00003300;
+	mw32(MVS_PA_VSR_PORT, tmp);
+
+	mw32(MVS_CMD_LIST_LO, mvi->slot_dma);
+	mw32(MVS_CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
+
+	mw32(MVS_RX_FIS_LO, mvi->rx_fis_dma);
+	mw32(MVS_RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
+
+	mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ);
+	mw32(MVS_TX_LO, mvi->tx_dma);
+	mw32(MVS_TX_HI, (mvi->tx_dma >> 16) >> 16);
+
+	mw32(MVS_RX_CFG, MVS_RX_RING_SZ);
+	mw32(MVS_RX_LO, mvi->rx_dma);
+	mw32(MVS_RX_HI, (mvi->rx_dma >> 16) >> 16);
+
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		mvs_94xx_phy_disable(mvi, i);
+		/* set phy local SAS address */
+		mvs_set_sas_addr(mvi, i, CONFIG_ID_FRAME3, CONFIG_ID_FRAME4,
+						(mvi->phy[i].dev_sas_addr));
+
+		mvs_94xx_enable_xmt(mvi, i);
+		mvs_94xx_phy_enable(mvi, i);
+
+		mvs_94xx_phy_reset(mvi, i, 1);
+		msleep(500);
+		mvs_94xx_detect_porttype(mvi, i);
+	}
+
+	if (mvi->flags & MVF_FLAG_SOC) {
+		/* set select registers */
+		writel(0x0E008000, regs + 0x000);
+		writel(0x59000008, regs + 0x004);
+		writel(0x20, regs + 0x008);
+		writel(0x20, regs + 0x00c);
+		writel(0x20, regs + 0x010);
+		writel(0x20, regs + 0x014);
+		writel(0x20, regs + 0x018);
+		writel(0x20, regs + 0x01c);
+	}
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		/* clear phy int status */
+		tmp = mvs_read_port_irq_stat(mvi, i);
+		tmp &= ~PHYEV_SIG_FIS;
+		mvs_write_port_irq_stat(mvi, i, tmp);
+
+		/* set phy int mask */
+		tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH |
+			PHYEV_ID_DONE  | PHYEV_DCDR_ERR | PHYEV_CRC_ERR ;
+		mvs_write_port_irq_mask(mvi, i, tmp);
+
+		msleep(100);
+		mvs_update_phyinfo(mvi, i, 1);
+	}
+
+	/* FIXME: update wide port bitmaps */
+
+	/* little endian for open address and command table, etc. */
+	/*
+	 * it seems that ( from the spec ) turning on big-endian won't
+	 * do us any good on big-endian machines, need further confirmation
+	 */
+	cctl = mr32(MVS_CTL);
+	cctl |= CCTL_ENDIAN_CMD;
+	cctl |= CCTL_ENDIAN_DATA;
+	cctl &= ~CCTL_ENDIAN_OPEN;
+	cctl |= CCTL_ENDIAN_RSP;
+	mw32_f(MVS_CTL, cctl);
+
+	/* reset CMD queue */
+	tmp = mr32(MVS_PCS);
+	tmp |= PCS_CMD_RST;
+	mw32(MVS_PCS, tmp);
+	/* interrupt coalescing may cause missing HW interrput in some case,
+	 * and the max count is 0x1ff, while our max slot is 0x200,
+	 * it will make count 0.
+	 */
+	tmp = 0;
+	mw32(MVS_INT_COAL, tmp);
+
+	tmp = 0x100;
+	mw32(MVS_INT_COAL_TMOUT, tmp);
+
+	/* ladies and gentlemen, start your engines */
+	mw32(MVS_TX_CFG, 0);
+	mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
+	mw32(MVS_RX_CFG, MVS_RX_RING_SZ | RX_EN);
+	/* enable CMD/CMPL_Q/RESP mode */
+	mw32(MVS_PCS, PCS_SATA_RETRY_2 | PCS_FIS_RX_EN |
+		PCS_CMD_EN | PCS_CMD_STOP_ERR);
+
+	/* enable completion queue interrupt */
+	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS | CINT_CI_STOP |
+		CINT_DMA_PCIE);
+	tmp |= CINT_PHY_MASK;
+	mw32(MVS_INT_MASK, tmp);
+
+	/* Enable SRS interrupt */
+	mw32(MVS_INT_MASK_SRS_0, 0xFFFF);
+
+	return 0;
+}
+
+static int mvs_94xx_ioremap(struct mvs_info *mvi)
+{
+	if (!mvs_ioremap(mvi, 2, -1)) {
+		mvi->regs_ex = mvi->regs + 0x10200;
+		mvi->regs += 0x20000;
+		if (mvi->id == 1)
+			mvi->regs += 0x4000;
+		return 0;
+	}
+	return -1;
+}
+
+static void mvs_94xx_iounmap(struct mvs_info *mvi)
+{
+	if (mvi->regs) {
+		mvi->regs -= 0x20000;
+		if (mvi->id == 1)
+			mvi->regs -= 0x4000;
+		mvs_iounmap(mvi->regs);
+	}
+}
+
+static void mvs_94xx_interrupt_enable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs_ex;
+	u32 tmp;
+
+	tmp = mr32(MVS_GBL_CTL);
+	tmp |= (IRQ_SAS_A | IRQ_SAS_B);
+	mw32(MVS_GBL_INT_STAT, tmp);
+	writel(tmp, regs + 0x0C);
+	writel(tmp, regs + 0x10);
+	writel(tmp, regs + 0x14);
+	writel(tmp, regs + 0x18);
+	mw32(MVS_GBL_CTL, tmp);
+}
+
+static void mvs_94xx_interrupt_disable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs_ex;
+	u32 tmp;
+
+	tmp = mr32(MVS_GBL_CTL);
+
+	tmp &= ~(IRQ_SAS_A | IRQ_SAS_B);
+	mw32(MVS_GBL_INT_STAT, tmp);
+	writel(tmp, regs + 0x0C);
+	writel(tmp, regs + 0x10);
+	writel(tmp, regs + 0x14);
+	writel(tmp, regs + 0x18);
+	mw32(MVS_GBL_CTL, tmp);
+}
+
+static u32 mvs_94xx_isr_status(struct mvs_info *mvi, int irq)
+{
+	void __iomem *regs = mvi->regs_ex;
+	u32 stat = 0;
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		stat = mr32(MVS_GBL_INT_STAT);
+
+		if (!(stat & (IRQ_SAS_A | IRQ_SAS_B)))
+			return 0;
+	}
+	return stat;
+}
+
+static irqreturn_t mvs_94xx_isr(struct mvs_info *mvi, int irq, u32 stat)
+{
+	void __iomem *regs = mvi->regs;
+
+	if (((stat & IRQ_SAS_A) && mvi->id == 0) ||
+			((stat & IRQ_SAS_B) && mvi->id == 1)) {
+		mw32_f(MVS_INT_STAT, CINT_DONE);
+	#ifndef MVS_USE_TASKLET
+		spin_lock(&mvi->lock);
+	#endif
+		mvs_int_full(mvi);
+	#ifndef MVS_USE_TASKLET
+		spin_unlock(&mvi->lock);
+	#endif
+	}
+	return IRQ_HANDLED;
+}
+
+static void mvs_94xx_command_active(struct mvs_info *mvi, u32 slot_idx)
+{
+	u32 tmp;
+	mvs_cw32(mvi, 0x300 + (slot_idx >> 3), 1 << (slot_idx % 32));
+	do {
+		tmp = mvs_cr32(mvi, 0x300 + (slot_idx >> 3));
+	} while (tmp & 1 << (slot_idx % 32));
+}
+
+static void mvs_94xx_issue_stop(struct mvs_info *mvi, enum mvs_port_type type,
+				u32 tfs)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	if (type == PORT_TYPE_SATA) {
+		tmp = mr32(MVS_INT_STAT_SRS_0) | (1U << tfs);
+		mw32(MVS_INT_STAT_SRS_0, tmp);
+	}
+	mw32(MVS_INT_STAT, CINT_CI_STOP);
+	tmp = mr32(MVS_PCS) | 0xFF00;
+	mw32(MVS_PCS, tmp);
+}
+
+static void mvs_94xx_free_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+	u8 reg_set = *tfs;
+
+	if (*tfs == MVS_ID_NOT_MAPPED)
+		return;
+
+	mvi->sata_reg_set &= ~bit(reg_set);
+	if (reg_set < 32) {
+		w_reg_set_enable(reg_set, (u32)mvi->sata_reg_set);
+		tmp = mr32(MVS_INT_STAT_SRS_0) & (u32)mvi->sata_reg_set;
+		if (tmp)
+			mw32(MVS_INT_STAT_SRS_0, tmp);
+	} else {
+		w_reg_set_enable(reg_set, mvi->sata_reg_set);
+		tmp = mr32(MVS_INT_STAT_SRS_1) & mvi->sata_reg_set;
+		if (tmp)
+			mw32(MVS_INT_STAT_SRS_1, tmp);
+	}
+
+	*tfs = MVS_ID_NOT_MAPPED;
+
+	return;
+}
+
+static u8 mvs_94xx_assign_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+	int i;
+	void __iomem *regs = mvi->regs;
+
+	if (*tfs != MVS_ID_NOT_MAPPED)
+		return 0;
+
+	i = mv_ffc64(mvi->sata_reg_set);
+	if (i > 32) {
+		mvi->sata_reg_set |= bit(i);
+		w_reg_set_enable(i, (u32)(mvi->sata_reg_set >> 32));
+		*tfs = i;
+		return 0;
+	} else if (i >= 0) {
+		mvi->sata_reg_set |= bit(i);
+		w_reg_set_enable(i, (u32)mvi->sata_reg_set);
+		*tfs = i;
+		return 0;
+	}
+	return MVS_ID_NOT_MAPPED;
+}
+
+static void mvs_94xx_make_prd(struct scatterlist *scatter, int nr, void *prd)
+{
+	int i;
+	struct scatterlist *sg;
+	struct mvs_prd *buf_prd = prd;
+	for_each_sg(scatter, sg, nr, i) {
+		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+		buf_prd->im_len.len = cpu_to_le32(sg_dma_len(sg));
+		buf_prd++;
+	}
+}
+
+static int mvs_94xx_oob_done(struct mvs_info *mvi, int i)
+{
+	u32 phy_st;
+	phy_st = mvs_read_phy_ctl(mvi, i);
+	if (phy_st & PHY_READY_MASK)	/* phy ready */
+		return 1;
+	return 0;
+}
+
+static void mvs_94xx_get_dev_identify_frame(struct mvs_info *mvi, int port_id,
+					struct sas_identify_frame *id)
+{
+	int i;
+	u32 id_frame[7];
+
+	for (i = 0; i < 7; i++) {
+		mvs_write_port_cfg_addr(mvi, port_id,
+					CONFIG_ID_FRAME0 + i * 4);
+		id_frame[i] = mvs_read_port_cfg_data(mvi, port_id);
+	}
+	memcpy(id, id_frame, 28);
+}
+
+static void mvs_94xx_get_att_identify_frame(struct mvs_info *mvi, int port_id,
+					struct sas_identify_frame *id)
+{
+	int i;
+	u32 id_frame[7];
+
+	/* mvs_hexdump(28, (u8 *)id_frame, 0); */
+	for (i = 0; i < 7; i++) {
+		mvs_write_port_cfg_addr(mvi, port_id,
+					CONFIG_ATT_ID_FRAME0 + i * 4);
+		id_frame[i] = mvs_read_port_cfg_data(mvi, port_id);
+		mv_dprintk("94xx phy %d atta frame %d %x.\n",
+			port_id + mvi->id * mvi->chip->n_phy, i, id_frame[i]);
+	}
+	/* mvs_hexdump(28, (u8 *)id_frame, 0); */
+	memcpy(id, id_frame, 28);
+}
+
+static u32 mvs_94xx_make_dev_info(struct sas_identify_frame *id)
+{
+	u32 att_dev_info = 0;
+
+	att_dev_info |= id->dev_type;
+	if (id->stp_iport)
+		att_dev_info |= PORT_DEV_STP_INIT;
+	if (id->smp_iport)
+		att_dev_info |= PORT_DEV_SMP_INIT;
+	if (id->ssp_iport)
+		att_dev_info |= PORT_DEV_SSP_INIT;
+	if (id->stp_tport)
+		att_dev_info |= PORT_DEV_STP_TRGT;
+	if (id->smp_tport)
+		att_dev_info |= PORT_DEV_SMP_TRGT;
+	if (id->ssp_tport)
+		att_dev_info |= PORT_DEV_SSP_TRGT;
+
+	att_dev_info |= (u32)id->phy_id<<24;
+	return att_dev_info;
+}
+
+static u32 mvs_94xx_make_att_info(struct sas_identify_frame *id)
+{
+	return mvs_94xx_make_dev_info(id);
+}
+
+static void mvs_94xx_fix_phy_info(struct mvs_info *mvi, int i,
+				struct sas_identify_frame *id)
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+	mv_dprintk("get all reg link rate is 0x%x\n", phy->phy_status);
+	sas_phy->linkrate =
+		(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+			PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
+	sas_phy->linkrate += 0x8;
+	mv_dprintk("get link rate is %d\n", sas_phy->linkrate);
+	phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+	phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
+	mvs_94xx_get_dev_identify_frame(mvi, i, id);
+	phy->dev_info = mvs_94xx_make_dev_info(id);
+
+	if (phy->phy_type & PORT_TYPE_SAS) {
+		mvs_94xx_get_att_identify_frame(mvi, i, id);
+		phy->att_dev_info = mvs_94xx_make_att_info(id);
+		phy->att_dev_sas_addr = *(u64 *)id->sas_addr;
+	} else {
+		phy->att_dev_info = PORT_DEV_STP_TRGT | 1;
+	}
+
+}
+
+void mvs_94xx_phy_set_link_rate(struct mvs_info *mvi, u32 phy_id,
+			struct sas_phy_linkrates *rates)
+{
+	/* TODO */
+}
+
+static void mvs_94xx_clear_active_cmds(struct mvs_info *mvi)
+{
+	u32 tmp;
+	void __iomem *regs = mvi->regs;
+	tmp = mr32(MVS_STP_REG_SET_0);
+	mw32(MVS_STP_REG_SET_0, 0);
+	mw32(MVS_STP_REG_SET_0, tmp);
+	tmp = mr32(MVS_STP_REG_SET_1);
+	mw32(MVS_STP_REG_SET_1, 0);
+	mw32(MVS_STP_REG_SET_1, tmp);
+}
+
+
+u32 mvs_94xx_spi_read_data(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	return mr32(SPI_RD_DATA_REG_94XX);
+}
+
+void mvs_94xx_spi_write_data(struct mvs_info *mvi, u32 data)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	 mw32(SPI_RD_DATA_REG_94XX, data);
+}
+
+
+int mvs_94xx_spi_buildcmd(struct mvs_info *mvi,
+				u32      *dwCmd,
+				u8       cmd,
+				u8       read,
+				u8       length,
+				u32      addr
+				)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	u32  dwTmp;
+
+	dwTmp = ((u32)cmd << 8) | ((u32)length << 4);
+	if (read)
+		dwTmp |= SPI_CTRL_READ_94XX;
+
+	if (addr != MV_MAX_U32) {
+		mw32(SPI_ADDR_REG_94XX, (addr & 0x0003FFFFL));
+		dwTmp |= SPI_ADDR_VLD_94XX;
+	}
+
+	*dwCmd = dwTmp;
+	return 0;
+}
+
+
+int mvs_94xx_spi_issuecmd(struct mvs_info *mvi, u32 cmd)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	mw32(SPI_CTRL_REG_94XX, cmd | SPI_CTRL_SpiStart_94XX);
+
+	return 0;
+}
+
+int mvs_94xx_spi_waitdataready(struct mvs_info *mvi, u32 timeout)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	u32   i, dwTmp;
+
+	for (i = 0; i < timeout; i++) {
+		dwTmp = mr32(SPI_CTRL_REG_94XX);
+		if (!(dwTmp & SPI_CTRL_SpiStart_94XX))
+			return 0;
+		msleep(10);
+	}
+
+	return -1;
+}
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+void mvs_94xx_fix_dma(dma_addr_t buf_dma, int buf_len, int from, void *prd)
+{
+	int i;
+	struct mvs_prd *buf_prd = prd;
+	buf_prd += from;
+	for (i = 0; i < MAX_SG_ENTRY - from; i++) {
+		buf_prd->addr = cpu_to_le64(buf_dma);
+		buf_prd->im_len.len = cpu_to_le32(buf_len);
+		++buf_prd;
+	}
+}
+#endif
+
+const struct mvs_dispatch mvs_94xx_dispatch = {
+	"mv94xx",
+	mvs_94xx_init,
+	NULL,
+	mvs_94xx_ioremap,
+	mvs_94xx_iounmap,
+	mvs_94xx_isr,
+	mvs_94xx_isr_status,
+	mvs_94xx_interrupt_enable,
+	mvs_94xx_interrupt_disable,
+	mvs_read_phy_ctl,
+	mvs_write_phy_ctl,
+	mvs_read_port_cfg_data,
+	mvs_write_port_cfg_data,
+	mvs_write_port_cfg_addr,
+	mvs_read_port_vsr_data,
+	mvs_write_port_vsr_data,
+	mvs_write_port_vsr_addr,
+	mvs_read_port_irq_stat,
+	mvs_write_port_irq_stat,
+	mvs_read_port_irq_mask,
+	mvs_write_port_irq_mask,
+	mvs_get_sas_addr,
+	mvs_94xx_command_active,
+	mvs_94xx_issue_stop,
+	mvs_start_delivery,
+	mvs_rx_update,
+	mvs_int_full,
+	mvs_94xx_assign_reg_set,
+	mvs_94xx_free_reg_set,
+	mvs_get_prd_size,
+	mvs_get_prd_count,
+	mvs_94xx_make_prd,
+	mvs_94xx_detect_porttype,
+	mvs_94xx_oob_done,
+	mvs_94xx_fix_phy_info,
+	NULL,
+	mvs_94xx_phy_set_link_rate,
+	mvs_hw_max_link_rate,
+	mvs_94xx_phy_disable,
+	mvs_94xx_phy_enable,
+	mvs_94xx_phy_reset,
+	NULL,
+	mvs_94xx_clear_active_cmds,
+	mvs_94xx_spi_read_data,
+	mvs_94xx_spi_write_data,
+	mvs_94xx_spi_buildcmd,
+	mvs_94xx_spi_issuecmd,
+	mvs_94xx_spi_waitdataready,
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	mvs_94xx_fix_dma,
+#endif
+};
+
diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
new file mode 100644
index 0000000..23ed9b1
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -0,0 +1,222 @@
+/*
+ * Marvell 88SE94xx hardware specific head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MVS94XX_REG_H_
+#define _MVS94XX_REG_H_
+
+#include <linux/types.h>
+
+#define MAX_LINK_RATE		SAS_LINK_RATE_6_0_GBPS
+
+enum hw_registers {
+	MVS_GBL_CTL		= 0x04,  /* global control */
+	MVS_GBL_INT_STAT	= 0x00,  /* global irq status */
+	MVS_GBL_PI		= 0x0C,  /* ports implemented bitmask */
+
+	MVS_PHY_CTL		= 0x40,  /* SOC PHY Control */
+	MVS_PORTS_IMP		= 0x9C,  /* SOC Port Implemented */
+
+	MVS_GBL_PORT_TYPE	= 0xa0,  /* port type */
+
+	MVS_CTL			= 0x100, /* SAS/SATA port configuration */
+	MVS_PCS			= 0x104, /* SAS/SATA port control/status */
+	MVS_CMD_LIST_LO		= 0x108, /* cmd list addr */
+	MVS_CMD_LIST_HI		= 0x10C,
+	MVS_RX_FIS_LO		= 0x110, /* RX FIS list addr */
+	MVS_RX_FIS_HI		= 0x114,
+	MVS_STP_REG_SET_0	= 0x118, /* STP/SATA Register Set Enable */
+	MVS_STP_REG_SET_1	= 0x11C,
+	MVS_TX_CFG		= 0x120, /* TX configuration */
+	MVS_TX_LO		= 0x124, /* TX (delivery) ring addr */
+	MVS_TX_HI		= 0x128,
+
+	MVS_TX_PROD_IDX		= 0x12C, /* TX producer pointer */
+	MVS_TX_CONS_IDX		= 0x130, /* TX consumer pointer (RO) */
+	MVS_RX_CFG		= 0x134, /* RX configuration */
+	MVS_RX_LO		= 0x138, /* RX (completion) ring addr */
+	MVS_RX_HI		= 0x13C,
+	MVS_RX_CONS_IDX		= 0x140, /* RX consumer pointer (RO) */
+
+	MVS_INT_COAL		= 0x148, /* Int coalescing config */
+	MVS_INT_COAL_TMOUT	= 0x14C, /* Int coalescing timeout */
+	MVS_INT_STAT		= 0x150, /* Central int status */
+	MVS_INT_MASK		= 0x154, /* Central int enable */
+	MVS_INT_STAT_SRS_0	= 0x158, /* SATA register set status */
+	MVS_INT_MASK_SRS_0	= 0x15C,
+	MVS_INT_STAT_SRS_1	= 0x160,
+	MVS_INT_MASK_SRS_1	= 0x164,
+	MVS_NON_NCQ_ERR_0	= 0x168, /* SRS Non-specific NCQ Error */
+	MVS_NON_NCQ_ERR_1	= 0x16C,
+	MVS_CMD_ADDR		= 0x170, /* Command register port (addr) */
+	MVS_CMD_DATA		= 0x174, /* Command register port (data) */
+	MVS_MEM_PARITY_ERR	= 0x178, /* Memory parity error */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_INT_STAT		= 0x180, /* port0 interrupt status */
+	MVS_P0_INT_MASK		= 0x184, /* port0 interrupt mask */
+					 /* ports 5-7 follow after this */
+	MVS_P4_INT_STAT		= 0x1A0, /* Port4 interrupt status */
+	MVS_P4_INT_MASK		= 0x1A4, /* Port4 interrupt enable mask */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_SER_CTLSTAT	= 0x1D0, /* port0 serial control/status */
+					 /* ports 5-7 follow after this */
+	MVS_P4_SER_CTLSTAT	= 0x1E0, /* port4 serial control/status */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_CFG_ADDR		= 0x200, /* port0 phy register address */
+	MVS_P0_CFG_DATA		= 0x204, /* port0 phy register data */
+					 /* ports 5-7 follow after this */
+	MVS_P4_CFG_ADDR		= 0x220, /* Port4 config address */
+	MVS_P4_CFG_DATA		= 0x224, /* Port4 config data */
+
+					 /* phys 1-3 follow after this */
+	MVS_P0_VSR_ADDR		= 0x250, /* phy0 VSR address */
+	MVS_P0_VSR_DATA		= 0x254, /* phy0 VSR data */
+					 /* phys 1-3 follow after this */
+					 /* multiplexing */
+	MVS_P4_VSR_ADDR 	= 0x250, /* phy4 VSR address */
+	MVS_P4_VSR_DATA 	= 0x254, /* phy4 VSR data */
+	MVS_PA_VSR_ADDR		= 0x290, /* All port VSR addr */
+	MVS_PA_VSR_PORT		= 0x294, /* All port VSR data */
+};
+
+enum pci_cfg_registers {
+	PCR_PHY_CTL		= 0x40,
+	PCR_PHY_CTL2		= 0x90,
+	PCR_DEV_CTRL		= 0x78,
+	PCR_LINK_STAT		= 0x82,
+};
+
+/*  SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+	VSR_PHY_STAT		= 0x00 * 4, /* Phy Status */
+	VSR_PHY_MODE1		= 0x01 * 4, /* phy tx */
+	VSR_PHY_MODE2		= 0x02 * 4, /* tx scc */
+	VSR_PHY_MODE3		= 0x03 * 4, /* pll */
+	VSR_PHY_MODE4		= 0x04 * 4, /* VCO */
+	VSR_PHY_MODE5		= 0x05 * 4, /* Rx */
+	VSR_PHY_MODE6		= 0x06 * 4, /* CDR */
+	VSR_PHY_MODE7		= 0x07 * 4, /* Impedance */
+	VSR_PHY_MODE8		= 0x08 * 4, /* Voltage */
+	VSR_PHY_MODE9		= 0x09 * 4, /* Test */
+	VSR_PHY_MODE10		= 0x0A * 4, /* Power */
+	VSR_PHY_MODE11		= 0x0B * 4, /* Phy Mode */
+	VSR_PHY_VS0		= 0x0C * 4, /* Vednor Specific 0 */
+	VSR_PHY_VS1		= 0x0D * 4, /* Vednor Specific 1 */
+};
+
+enum chip_register_bits {
+	PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8),
+	PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (12),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
+			(0x3 << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
+};
+
+enum pci_interrupt_cause {
+	/*  MAIN_IRQ_CAUSE (R10200) Bits*/
+	IRQ_COM_IN_I2O_IOP0            = (1 << 0),
+	IRQ_COM_IN_I2O_IOP1            = (1 << 1),
+	IRQ_COM_IN_I2O_IOP2            = (1 << 2),
+	IRQ_COM_IN_I2O_IOP3            = (1 << 3),
+	IRQ_COM_OUT_I2O_HOS0           = (1 << 4),
+	IRQ_COM_OUT_I2O_HOS1           = (1 << 5),
+	IRQ_COM_OUT_I2O_HOS2           = (1 << 6),
+	IRQ_COM_OUT_I2O_HOS3           = (1 << 7),
+	IRQ_PCIF_TO_CPU_DRBL0          = (1 << 8),
+	IRQ_PCIF_TO_CPU_DRBL1          = (1 << 9),
+	IRQ_PCIF_TO_CPU_DRBL2          = (1 << 10),
+	IRQ_PCIF_TO_CPU_DRBL3          = (1 << 11),
+	IRQ_PCIF_DRBL0                 = (1 << 12),
+	IRQ_PCIF_DRBL1                 = (1 << 13),
+	IRQ_PCIF_DRBL2                 = (1 << 14),
+	IRQ_PCIF_DRBL3                 = (1 << 15),
+	IRQ_XOR_A                      = (1 << 16),
+	IRQ_XOR_B                      = (1 << 17),
+	IRQ_SAS_A                      = (1 << 18),
+	IRQ_SAS_B                      = (1 << 19),
+	IRQ_CPU_CNTRL                  = (1 << 20),
+	IRQ_GPIO                       = (1 << 21),
+	IRQ_UART                       = (1 << 22),
+	IRQ_SPI                        = (1 << 23),
+	IRQ_I2C                        = (1 << 24),
+	IRQ_SGPIO                      = (1 << 25),
+	IRQ_COM_ERR                    = (1 << 29),
+	IRQ_I2O_ERR                    = (1 << 30),
+	IRQ_PCIE_ERR                   = (1 << 31),
+};
+
+#define MAX_SG_ENTRY		255
+
+struct mvs_prd_imt {
+	__le32			len:22;
+	u8			_r_a:2;
+	u8			misc_ctl:4;
+	u8			inter_sel:4;
+};
+
+struct mvs_prd {
+	/* 64-bit buffer address */
+	__le64			addr;
+	/* 22-bit length */
+	struct mvs_prd_imt	im_len;
+} __attribute__ ((packed));
+
+#define SPI_CTRL_REG_94XX           	0xc800
+#define SPI_ADDR_REG_94XX            	0xc804
+#define SPI_WR_DATA_REG_94XX         0xc808
+#define SPI_RD_DATA_REG_94XX         	0xc80c
+#define SPI_CTRL_READ_94XX         	(1U << 2)
+#define SPI_ADDR_VLD_94XX         	(1U << 1)
+#define SPI_CTRL_SpiStart_94XX     	(1U << 0)
+
+#define mv_ffc(x)   ffz(x)
+
+static inline int
+mv_ffc64(u64 v)
+{
+	int i;
+	i = mv_ffc((u32)v);
+	if (i >= 0)
+		return i;
+	i = mv_ffc((u32)(v>>32));
+
+	if (i != 0)
+		return 32 + i;
+
+	return -1;
+}
+
+#define r_reg_set_enable(i) \
+	(((i) > 31) ? mr32(MVS_STP_REG_SET_1) : \
+	mr32(MVS_STP_REG_SET_0))
+
+#define w_reg_set_enable(i, tmp) \
+	(((i) > 31) ? mw32(MVS_STP_REG_SET_1, tmp) : \
+	mw32(MVS_STP_REG_SET_0, tmp))
+
+extern const struct mvs_dispatch mvs_94xx_dispatch;
+#endif
+
diff --git a/drivers/scsi/mvsas/mv_chips.h b/drivers/scsi/mvsas/mv_chips.h
new file mode 100644
index 0000000..a67e1c4
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_chips.h
@@ -0,0 +1,280 @@
+/*
+ * Marvell 88SE64xx/88SE94xx register IO interface
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+
+#ifndef _MV_CHIPS_H_
+#define _MV_CHIPS_H_
+
+#define mr32(reg)	readl(regs + reg)
+#define mw32(reg, val)	writel((val), regs + reg)
+#define mw32_f(reg, val)	do {			\
+				mw32(reg, val);	\
+				mr32(reg);	\
+			} while (0)
+
+#define iow32(reg, val) 	outl(val, (unsigned long)(regs + reg))
+#define ior32(reg) 		inl((unsigned long)(regs + reg))
+#define iow16(reg, val) 	outw((unsigned long)(val, regs + reg))
+#define ior16(reg) 		inw((unsigned long)(regs + reg))
+#define iow8(reg, val) 		outb((unsigned long)(val, regs + reg))
+#define ior8(reg) 		inb((unsigned long)(regs + reg))
+
+static inline u32 mvs_cr32(struct mvs_info *mvi, u32 addr)
+{
+	void __iomem *regs = mvi->regs;
+	mw32(MVS_CMD_ADDR, addr);
+	return mr32(MVS_CMD_DATA);
+}
+
+static inline void mvs_cw32(struct mvs_info *mvi, u32 addr, u32 val)
+{
+	void __iomem *regs = mvi->regs;
+	mw32(MVS_CMD_ADDR, addr);
+	mw32(MVS_CMD_DATA, val);
+}
+
+static inline u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port)
+{
+	void __iomem *regs = mvi->regs;
+	return (port < 4) ? mr32(MVS_P0_SER_CTLSTAT + port * 4) :
+		mr32(MVS_P4_SER_CTLSTAT + (port - 4) * 4);
+}
+
+static inline void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val)
+{
+	void __iomem *regs = mvi->regs;
+	if (port < 4)
+		mw32(MVS_P0_SER_CTLSTAT + port * 4, val);
+	else
+		mw32(MVS_P4_SER_CTLSTAT + (port - 4) * 4, val);
+}
+
+static inline u32 mvs_read_port(struct mvs_info *mvi, u32 off,
+				u32 off2, u32 port)
+{
+	void __iomem *regs = mvi->regs + off;
+	void __iomem *regs2 = mvi->regs + off2;
+	return (port < 4) ? readl(regs + port * 8) :
+		readl(regs2 + (port - 4) * 8);
+}
+
+static inline void mvs_write_port(struct mvs_info *mvi, u32 off, u32 off2,
+				u32 port, u32 val)
+{
+	void __iomem *regs = mvi->regs + off;
+	void __iomem *regs2 = mvi->regs + off2;
+	if (port < 4)
+		writel(val, regs + port * 8);
+	else
+		writel(val, regs2 + (port - 4) * 8);
+}
+
+static inline u32 mvs_read_port_cfg_data(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_CFG_DATA,
+			MVS_P4_CFG_DATA, port);
+}
+
+static inline void mvs_write_port_cfg_data(struct mvs_info *mvi,
+						u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_CFG_DATA,
+			MVS_P4_CFG_DATA, port, val);
+}
+
+static inline void mvs_write_port_cfg_addr(struct mvs_info *mvi,
+						u32 port, u32 addr)
+{
+	mvs_write_port(mvi, MVS_P0_CFG_ADDR,
+			MVS_P4_CFG_ADDR, port, addr);
+	mdelay(10);
+}
+
+static inline u32 mvs_read_port_vsr_data(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_VSR_DATA,
+			MVS_P4_VSR_DATA, port);
+}
+
+static inline void mvs_write_port_vsr_data(struct mvs_info *mvi,
+						u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_VSR_DATA,
+			MVS_P4_VSR_DATA, port, val);
+}
+
+static inline void mvs_write_port_vsr_addr(struct mvs_info *mvi,
+						u32 port, u32 addr)
+{
+	mvs_write_port(mvi, MVS_P0_VSR_ADDR,
+			MVS_P4_VSR_ADDR, port, addr);
+	mdelay(10);
+}
+
+static inline u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_INT_STAT,
+			MVS_P4_INT_STAT, port);
+}
+
+static inline void mvs_write_port_irq_stat(struct mvs_info *mvi,
+						u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_INT_STAT,
+			MVS_P4_INT_STAT, port, val);
+}
+
+static inline u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_INT_MASK,
+			MVS_P4_INT_MASK, port);
+
+}
+
+static inline void mvs_write_port_irq_mask(struct mvs_info *mvi,
+						u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_INT_MASK,
+			MVS_P4_INT_MASK, port, val);
+}
+
+static inline void __devinit mvs_phy_hacks(struct mvs_info *mvi)
+{
+	u32 tmp;
+
+	/* workaround for SATA R-ERR, to ignore phy glitch */
+	tmp = mvs_cr32(mvi, CMD_PHY_TIMER);
+	tmp &= ~(1 << 9);
+	tmp |= (1 << 10);
+	mvs_cw32(mvi, CMD_PHY_TIMER, tmp);
+
+	/* enable retry 127 times */
+	mvs_cw32(mvi, CMD_SAS_CTL1, 0x7f7f);
+
+	/* extend open frame timeout to max */
+	tmp = mvs_cr32(mvi, CMD_SAS_CTL0);
+	tmp &= ~0xffff;
+	tmp |= 0x3fff;
+	mvs_cw32(mvi, CMD_SAS_CTL0, tmp);
+
+	/* workaround for WDTIMEOUT , set to 550 ms */
+	mvs_cw32(mvi, CMD_WD_TIMER, 0x7a0000);
+
+	/* not to halt for different port op during wideport link change */
+	mvs_cw32(mvi, CMD_APP_ERR_CONFIG, 0xffefbf7d);
+
+	/* workaround for Seagate disk not-found OOB sequence, recv
+	 * COMINIT before sending out COMWAKE */
+	tmp = mvs_cr32(mvi, CMD_PHY_MODE_21);
+	tmp &= 0x0000ffff;
+	tmp |= 0x00fa0000;
+	mvs_cw32(mvi, CMD_PHY_MODE_21, tmp);
+
+	tmp = mvs_cr32(mvi, CMD_PHY_TIMER);
+	tmp &= 0x1fffffff;
+	tmp |= (2U << 29);	/* 8 ms retry */
+	mvs_cw32(mvi, CMD_PHY_TIMER, tmp);
+}
+
+static inline void mvs_int_sata(struct mvs_info *mvi)
+{
+	u32 tmp;
+	void __iomem *regs = mvi->regs;
+	tmp = mr32(MVS_INT_STAT_SRS_0);
+	if (tmp)
+		mw32(MVS_INT_STAT_SRS_0, tmp);
+	MVS_CHIP_DISP->clear_active_cmds(mvi);
+}
+
+static inline void mvs_int_full(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp, stat;
+	int i;
+
+	stat = mr32(MVS_INT_STAT);
+	mvs_int_rx(mvi, false);
+
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		tmp = (stat >> i) & (CINT_PORT | CINT_PORT_STOPPED);
+		if (tmp)
+			mvs_int_port(mvi, i, tmp);
+	}
+
+	if (stat & CINT_SRS)
+		mvs_int_sata(mvi);
+
+	mw32(MVS_INT_STAT, stat);
+}
+
+static inline void mvs_start_delivery(struct mvs_info *mvi, u32 tx)
+{
+	void __iomem *regs = mvi->regs;
+	mw32(MVS_TX_PROD_IDX, tx);
+}
+
+static inline u32 mvs_rx_update(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	return mr32(MVS_RX_CONS_IDX);
+}
+
+static inline u32 mvs_get_prd_size(void)
+{
+	return sizeof(struct mvs_prd);
+}
+
+static inline u32 mvs_get_prd_count(void)
+{
+	return MAX_SG_ENTRY;
+}
+
+static inline void mvs_show_pcie_usage(struct mvs_info *mvi)
+{
+	u16 link_stat, link_spd;
+	const char *spd[] = {
+		"UnKnown",
+		"2.5",
+		"5.0",
+	};
+	if (mvi->flags & MVF_FLAG_SOC || mvi->id > 0)
+		return;
+
+	pci_read_config_word(mvi->pdev, PCR_LINK_STAT, &link_stat);
+	link_spd = (link_stat & PLS_LINK_SPD) >> PLS_LINK_SPD_OFFS;
+	if (link_spd >= 3)
+		link_spd = 0;
+	dev_printk(KERN_INFO, mvi->dev,
+		"mvsas: PCI-E x%u, Bandwidth Usage: %s Gbps\n",
+	       (link_stat & PLS_NEG_LINK_WD) >> PLS_NEG_LINK_WD_OFFS,
+	       spd[link_spd]);
+}
+
+static inline u32 mvs_hw_max_link_rate(void)
+{
+	return MAX_LINK_RATE;
+}
+
+#endif  /* _MV_CHIPS_H_ */
+
diff --git a/drivers/scsi/mvsas/mv_defs.h b/drivers/scsi/mvsas/mv_defs.h
new file mode 100644
index 0000000..f8cb9de
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_defs.h
@@ -0,0 +1,502 @@
+/*
+ * Marvell 88SE64xx/88SE94xx const head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MV_DEFS_H_
+#define _MV_DEFS_H_
+
+
+enum chip_flavors {
+	chip_6320,
+	chip_6440,
+	chip_6485,
+	chip_9480,
+	chip_9180,
+};
+
+/* driver compile-time configuration */
+enum driver_configuration {
+	MVS_SLOTS		= 512,	/* command slots */
+	MVS_TX_RING_SZ		= 1024,	/* TX ring size (12-bit) */
+	MVS_RX_RING_SZ		= 1024, /* RX ring size (12-bit) */
+					/* software requires power-of-2
+					   ring size */
+	MVS_SOC_SLOTS		= 64,
+	MVS_SOC_TX_RING_SZ	= MVS_SOC_SLOTS * 2,
+	MVS_SOC_RX_RING_SZ	= MVS_SOC_SLOTS * 2,
+
+	MVS_SLOT_BUF_SZ		= 8192, /* cmd tbl + IU + status + PRD */
+	MVS_SSP_CMD_SZ		= 64,	/* SSP command table buffer size */
+	MVS_ATA_CMD_SZ		= 96,	/* SATA command table buffer size */
+	MVS_OAF_SZ		= 64,	/* Open address frame buffer size */
+	MVS_QUEUE_SIZE	= 32,	/* Support Queue depth */
+	MVS_CAN_QUEUE		= MVS_SLOTS - 2,	/* SCSI Queue depth */
+	MVS_SOC_CAN_QUEUE	= MVS_SOC_SLOTS - 2,
+};
+
+/* unchangeable hardware details */
+enum hardware_details {
+	MVS_MAX_PHYS		= 8,	/* max. possible phys */
+	MVS_MAX_PORTS		= 8,	/* max. possible ports */
+	MVS_SOC_PHYS		= 4,	/* soc phys */
+	MVS_SOC_PORTS		= 4,	/* soc phys */
+	MVS_MAX_DEVICES	= 1024,	/* max supported device */
+};
+
+/* peripheral registers (BAR2) */
+enum peripheral_registers {
+	SPI_CTL			= 0x10,	/* EEPROM control */
+	SPI_CMD			= 0x14,	/* EEPROM command */
+	SPI_DATA		= 0x18, /* EEPROM data */
+};
+
+enum peripheral_register_bits {
+	TWSI_RDY		= (1U << 7),	/* EEPROM interface ready */
+	TWSI_RD			= (1U << 4),	/* EEPROM read access */
+
+	SPI_ADDR_MASK		= 0x3ffff,	/* bits 17:0 */
+};
+
+enum hw_register_bits {
+	/* MVS_GBL_CTL */
+	INT_EN			= (1U << 1),	/* Global int enable */
+	HBA_RST			= (1U << 0),	/* HBA reset */
+
+	/* MVS_GBL_INT_STAT */
+	INT_XOR			= (1U << 4),	/* XOR engine event */
+	INT_SAS_SATA		= (1U << 0),	/* SAS/SATA event */
+
+	/* MVS_GBL_PORT_TYPE */			/* shl for ports 1-3 */
+	SATA_TARGET		= (1U << 16),	/* port0 SATA target enable */
+	MODE_AUTO_DET_PORT7 = (1U << 15),	/* port0 SAS/SATA autodetect */
+	MODE_AUTO_DET_PORT6 = (1U << 14),
+	MODE_AUTO_DET_PORT5 = (1U << 13),
+	MODE_AUTO_DET_PORT4 = (1U << 12),
+	MODE_AUTO_DET_PORT3 = (1U << 11),
+	MODE_AUTO_DET_PORT2 = (1U << 10),
+	MODE_AUTO_DET_PORT1 = (1U << 9),
+	MODE_AUTO_DET_PORT0 = (1U << 8),
+	MODE_AUTO_DET_EN    =	MODE_AUTO_DET_PORT0 | MODE_AUTO_DET_PORT1 |
+				MODE_AUTO_DET_PORT2 | MODE_AUTO_DET_PORT3 |
+				MODE_AUTO_DET_PORT4 | MODE_AUTO_DET_PORT5 |
+				MODE_AUTO_DET_PORT6 | MODE_AUTO_DET_PORT7,
+	MODE_SAS_PORT7_MASK = (1U << 7),  /* port0 SAS(1), SATA(0) mode */
+	MODE_SAS_PORT6_MASK = (1U << 6),
+	MODE_SAS_PORT5_MASK = (1U << 5),
+	MODE_SAS_PORT4_MASK = (1U << 4),
+	MODE_SAS_PORT3_MASK = (1U << 3),
+	MODE_SAS_PORT2_MASK = (1U << 2),
+	MODE_SAS_PORT1_MASK = (1U << 1),
+	MODE_SAS_PORT0_MASK = (1U << 0),
+	MODE_SAS_SATA	=	MODE_SAS_PORT0_MASK | MODE_SAS_PORT1_MASK |
+				MODE_SAS_PORT2_MASK | MODE_SAS_PORT3_MASK |
+				MODE_SAS_PORT4_MASK | MODE_SAS_PORT5_MASK |
+				MODE_SAS_PORT6_MASK | MODE_SAS_PORT7_MASK,
+
+				/* SAS_MODE value may be
+				 * dictated (in hw) by values
+				 * of SATA_TARGET & AUTO_DET
+				 */
+
+	/* MVS_TX_CFG */
+	TX_EN			= (1U << 16),	/* Enable TX */
+	TX_RING_SZ_MASK		= 0xfff,	/* TX ring size, bits 11:0 */
+
+	/* MVS_RX_CFG */
+	RX_EN			= (1U << 16),	/* Enable RX */
+	RX_RING_SZ_MASK		= 0xfff,	/* RX ring size, bits 11:0 */
+
+	/* MVS_INT_COAL */
+	COAL_EN			= (1U << 16),	/* Enable int coalescing */
+
+	/* MVS_INT_STAT, MVS_INT_MASK */
+	CINT_I2C		= (1U << 31),	/* I2C event */
+	CINT_SW0		= (1U << 30),	/* software event 0 */
+	CINT_SW1		= (1U << 29),	/* software event 1 */
+	CINT_PRD_BC		= (1U << 28),	/* PRD BC err for read cmd */
+	CINT_DMA_PCIE		= (1U << 27),	/* DMA to PCIE timeout */
+	CINT_MEM		= (1U << 26),	/* int mem parity err */
+	CINT_I2C_SLAVE		= (1U << 25),	/* slave I2C event */
+	CINT_SRS		= (1U << 3),	/* SRS event */
+	CINT_CI_STOP		= (1U << 1),	/* cmd issue stopped */
+	CINT_DONE		= (1U << 0),	/* cmd completion */
+
+						/* shl for ports 1-3 */
+	CINT_PORT_STOPPED	= (1U << 16),	/* port0 stopped */
+	CINT_PORT		= (1U << 8),	/* port0 event */
+	CINT_PORT_MASK_OFFSET	= 8,
+	CINT_PORT_MASK		= (0xFF << CINT_PORT_MASK_OFFSET),
+	CINT_PHY_MASK_OFFSET	= 4,
+	CINT_PHY_MASK		= (0x0F << CINT_PHY_MASK_OFFSET),
+
+	/* TX (delivery) ring bits */
+	TXQ_CMD_SHIFT		= 29,
+	TXQ_CMD_SSP		= 1,		/* SSP protocol */
+	TXQ_CMD_SMP		= 2,		/* SMP protocol */
+	TXQ_CMD_STP		= 3,		/* STP/SATA protocol */
+	TXQ_CMD_SSP_FREE_LIST	= 4,		/* add to SSP targ free list */
+	TXQ_CMD_SLOT_RESET	= 7,		/* reset command slot */
+	TXQ_MODE_I		= (1U << 28),	/* mode: 0=target,1=initiator */
+	TXQ_MODE_TARGET 	= 0,
+	TXQ_MODE_INITIATOR	= 1,
+	TXQ_PRIO_HI		= (1U << 27),	/* priority: 0=normal, 1=high */
+	TXQ_PRI_NORMAL		= 0,
+	TXQ_PRI_HIGH		= 1,
+	TXQ_SRS_SHIFT		= 20,		/* SATA register set */
+	TXQ_SRS_MASK		= 0x7f,
+	TXQ_PHY_SHIFT		= 12,		/* PHY bitmap */
+	TXQ_PHY_MASK		= 0xff,
+	TXQ_SLOT_MASK		= 0xfff,	/* slot number */
+
+	/* RX (completion) ring bits */
+	RXQ_GOOD		= (1U << 23),	/* Response good */
+	RXQ_SLOT_RESET		= (1U << 21),	/* Slot reset complete */
+	RXQ_CMD_RX		= (1U << 20),	/* target cmd received */
+	RXQ_ATTN		= (1U << 19),	/* attention */
+	RXQ_RSP			= (1U << 18),	/* response frame xfer'd */
+	RXQ_ERR			= (1U << 17),	/* err info rec xfer'd */
+	RXQ_DONE		= (1U << 16),	/* cmd complete */
+	RXQ_SLOT_MASK		= 0xfff,	/* slot number */
+
+	/* mvs_cmd_hdr bits */
+	MCH_PRD_LEN_SHIFT	= 16,		/* 16-bit PRD table len */
+	MCH_SSP_FR_TYPE_SHIFT	= 13,		/* SSP frame type */
+
+						/* SSP initiator only */
+	MCH_SSP_FR_CMD		= 0x0,		/* COMMAND frame */
+
+						/* SSP initiator or target */
+	MCH_SSP_FR_TASK		= 0x1,		/* TASK frame */
+
+						/* SSP target only */
+	MCH_SSP_FR_XFER_RDY	= 0x4,		/* XFER_RDY frame */
+	MCH_SSP_FR_RESP		= 0x5,		/* RESPONSE frame */
+	MCH_SSP_FR_READ		= 0x6,		/* Read DATA frame(s) */
+	MCH_SSP_FR_READ_RESP	= 0x7,		/* ditto, plus RESPONSE */
+
+	MCH_SSP_MODE_PASSTHRU	= 1,
+	MCH_SSP_MODE_NORMAL	= 0,
+	MCH_PASSTHRU		= (1U << 12),	/* pass-through (SSP) */
+	MCH_FBURST		= (1U << 11),	/* first burst (SSP) */
+	MCH_CHK_LEN		= (1U << 10),	/* chk xfer len (SSP) */
+	MCH_RETRY		= (1U << 9),	/* tport layer retry (SSP) */
+	MCH_PROTECTION		= (1U << 8),	/* protection info rec (SSP) */
+	MCH_RESET		= (1U << 7),	/* Reset (STP/SATA) */
+	MCH_FPDMA		= (1U << 6),	/* First party DMA (STP/SATA) */
+	MCH_ATAPI		= (1U << 5),	/* ATAPI (STP/SATA) */
+	MCH_BIST		= (1U << 4),	/* BIST activate (STP/SATA) */
+	MCH_PMP_MASK		= 0xf,		/* PMP from cmd FIS (STP/SATA)*/
+
+	CCTL_RST		= (1U << 5),	/* port logic reset */
+
+						/* 0(LSB first), 1(MSB first) */
+	CCTL_ENDIAN_DATA	= (1U << 3),	/* PRD data */
+	CCTL_ENDIAN_RSP		= (1U << 2),	/* response frame */
+	CCTL_ENDIAN_OPEN	= (1U << 1),	/* open address frame */
+	CCTL_ENDIAN_CMD		= (1U << 0),	/* command table */
+
+	/* MVS_Px_SER_CTLSTAT (per-phy control) */
+	PHY_SSP_RST		= (1U << 3),	/* reset SSP link layer */
+	PHY_BCAST_CHG		= (1U << 2),	/* broadcast(change) notif */
+	PHY_RST_HARD		= (1U << 1),	/* hard reset + phy reset */
+	PHY_RST			= (1U << 0),	/* phy reset */
+	PHY_READY_MASK		= (1U << 20),
+
+	/* MVS_Px_INT_STAT, MVS_Px_INT_MASK (per-phy events) */
+	PHYEV_DEC_ERR		= (1U << 24),	/* Phy Decoding Error */
+	PHYEV_DCDR_ERR		= (1U << 23),	/* STP Deocder Error */
+	PHYEV_CRC_ERR		= (1U << 22),	/* STP CRC Error */
+	PHYEV_UNASSOC_FIS	= (1U << 19),	/* unassociated FIS rx'd */
+	PHYEV_AN		= (1U << 18),	/* SATA async notification */
+	PHYEV_BIST_ACT		= (1U << 17),	/* BIST activate FIS */
+	PHYEV_SIG_FIS		= (1U << 16),	/* signature FIS */
+	PHYEV_POOF		= (1U << 12),	/* phy ready from 1 -> 0 */
+	PHYEV_IU_BIG		= (1U << 11),	/* IU too long err */
+	PHYEV_IU_SMALL		= (1U << 10),	/* IU too short err */
+	PHYEV_UNK_TAG		= (1U << 9),	/* unknown tag */
+	PHYEV_BROAD_CH		= (1U << 8),	/* broadcast(CHANGE) */
+	PHYEV_COMWAKE		= (1U << 7),	/* COMWAKE rx'd */
+	PHYEV_PORT_SEL		= (1U << 6),	/* port selector present */
+	PHYEV_HARD_RST		= (1U << 5),	/* hard reset rx'd */
+	PHYEV_ID_TMOUT		= (1U << 4),	/* identify timeout */
+	PHYEV_ID_FAIL		= (1U << 3),	/* identify failed */
+	PHYEV_ID_DONE		= (1U << 2),	/* identify done */
+	PHYEV_HARD_RST_DONE	= (1U << 1),	/* hard reset done */
+	PHYEV_RDY_CH		= (1U << 0),	/* phy ready changed state */
+
+	/* MVS_PCS */
+	PCS_EN_SATA_REG_SHIFT	= (16),		/* Enable SATA Register Set */
+	PCS_EN_PORT_XMT_SHIFT	= (12),		/* Enable Port Transmit */
+	PCS_EN_PORT_XMT_SHIFT2	= (8),		/* For 6485 */
+	PCS_SATA_RETRY		= (1U << 8),	/* retry ctl FIS on R_ERR */
+	PCS_RSP_RX_EN		= (1U << 7),	/* raw response rx */
+	PCS_SATA_RETRY_2	= (1U << 6),	/* For 9180 */
+	PCS_SELF_CLEAR		= (1U << 5),	/* self-clearing int mode */
+	PCS_FIS_RX_EN		= (1U << 4),	/* FIS rx enable */
+	PCS_CMD_STOP_ERR	= (1U << 3),	/* cmd stop-on-err enable */
+	PCS_CMD_RST		= (1U << 1),	/* reset cmd issue */
+	PCS_CMD_EN		= (1U << 0),	/* enable cmd issue */
+
+	/* Port n Attached Device Info */
+	PORT_DEV_SSP_TRGT	= (1U << 19),
+	PORT_DEV_SMP_TRGT	= (1U << 18),
+	PORT_DEV_STP_TRGT	= (1U << 17),
+	PORT_DEV_SSP_INIT	= (1U << 11),
+	PORT_DEV_SMP_INIT	= (1U << 10),
+	PORT_DEV_STP_INIT	= (1U << 9),
+	PORT_PHY_ID_MASK	= (0xFFU << 24),
+	PORT_SSP_TRGT_MASK	= (0x1U << 19),
+	PORT_SSP_INIT_MASK	= (0x1U << 11),
+	PORT_DEV_TRGT_MASK	= (0x7U << 17),
+	PORT_DEV_INIT_MASK	= (0x7U << 9),
+	PORT_DEV_TYPE_MASK	= (0x7U << 0),
+
+	/* Port n PHY Status */
+	PHY_RDY			= (1U << 2),
+	PHY_DW_SYNC		= (1U << 1),
+	PHY_OOB_DTCTD		= (1U << 0),
+
+	/* VSR */
+	/* PHYMODE 6 (CDB) */
+	PHY_MODE6_LATECLK	= (1U << 29),	/* Lock Clock */
+	PHY_MODE6_DTL_SPEED	= (1U << 27),	/* Digital Loop Speed */
+	PHY_MODE6_FC_ORDER	= (1U << 26),	/* Fibre Channel Mode Order*/
+	PHY_MODE6_MUCNT_EN	= (1U << 24),	/* u Count Enable */
+	PHY_MODE6_SEL_MUCNT_LEN	= (1U << 22),	/* Training Length Select */
+	PHY_MODE6_SELMUPI	= (1U << 20),	/* Phase Multi Select (init) */
+	PHY_MODE6_SELMUPF	= (1U << 18),	/* Phase Multi Select (final) */
+	PHY_MODE6_SELMUFF	= (1U << 16),	/* Freq Loop Multi Sel(final) */
+	PHY_MODE6_SELMUFI	= (1U << 14),	/* Freq Loop Multi Sel(init) */
+	PHY_MODE6_FREEZE_LOOP	= (1U << 12),	/* Freeze Rx CDR Loop */
+	PHY_MODE6_INT_RXFOFFS	= (1U << 3),	/* Rx CDR Freq Loop Enable */
+	PHY_MODE6_FRC_RXFOFFS	= (1U << 2),	/* Initial Rx CDR Offset */
+	PHY_MODE6_STAU_0D8	= (1U << 1),	/* Rx CDR Freq Loop Saturate */
+	PHY_MODE6_RXSAT_DIS	= (1U << 0),	/* Saturate Ctl */
+};
+
+/* SAS/SATA configuration port registers, aka phy registers */
+enum sas_sata_config_port_regs {
+	PHYR_IDENTIFY		= 0x00,	/* info for IDENTIFY frame */
+	PHYR_ADDR_LO		= 0x04,	/* my SAS address (low) */
+	PHYR_ADDR_HI		= 0x08,	/* my SAS address (high) */
+	PHYR_ATT_DEV_INFO	= 0x0C,	/* attached device info */
+	PHYR_ATT_ADDR_LO	= 0x10,	/* attached dev SAS addr (low) */
+	PHYR_ATT_ADDR_HI	= 0x14,	/* attached dev SAS addr (high) */
+	PHYR_SATA_CTL		= 0x18,	/* SATA control */
+	PHYR_PHY_STAT		= 0x1C,	/* PHY status */
+	PHYR_SATA_SIG0	= 0x20,	/*port SATA signature FIS(Byte 0-3) */
+	PHYR_SATA_SIG1	= 0x24,	/*port SATA signature FIS(Byte 4-7) */
+	PHYR_SATA_SIG2	= 0x28,	/*port SATA signature FIS(Byte 8-11) */
+	PHYR_SATA_SIG3	= 0x2c,	/*port SATA signature FIS(Byte 12-15) */
+	PHYR_R_ERR_COUNT	= 0x30, /* port R_ERR count register */
+	PHYR_CRC_ERR_COUNT	= 0x34, /* port CRC error count register */
+	PHYR_WIDE_PORT	= 0x38,	/* wide port participating */
+	PHYR_CURRENT0		= 0x80,	/* current connection info 0 */
+	PHYR_CURRENT1		= 0x84,	/* current connection info 1 */
+	PHYR_CURRENT2		= 0x88,	/* current connection info 2 */
+	CONFIG_ID_FRAME0       = 0x100, /* Port device ID frame register 0 */
+	CONFIG_ID_FRAME1       = 0x104, /* Port device ID frame register 1 */
+	CONFIG_ID_FRAME2       = 0x108, /* Port device ID frame register 2 */
+	CONFIG_ID_FRAME3       = 0x10c, /* Port device ID frame register 3 */
+	CONFIG_ID_FRAME4       = 0x110, /* Port device ID frame register 4 */
+	CONFIG_ID_FRAME5       = 0x114, /* Port device ID frame register 5 */
+	CONFIG_ID_FRAME6       = 0x118, /* Port device ID frame register 6 */
+	CONFIG_ATT_ID_FRAME0   = 0x11c, /* attached ID frame register 0 */
+	CONFIG_ATT_ID_FRAME1   = 0x120, /* attached ID frame register 1 */
+	CONFIG_ATT_ID_FRAME2   = 0x124, /* attached ID frame register 2 */
+	CONFIG_ATT_ID_FRAME3   = 0x128, /* attached ID frame register 3 */
+	CONFIG_ATT_ID_FRAME4   = 0x12c, /* attached ID frame register 4 */
+	CONFIG_ATT_ID_FRAME5   = 0x130, /* attached ID frame register 5 */
+	CONFIG_ATT_ID_FRAME6   = 0x134, /* attached ID frame register 6 */
+};
+
+enum sas_cmd_port_registers {
+	CMD_CMRST_OOB_DET	= 0x100, /* COMRESET OOB detect register */
+	CMD_CMWK_OOB_DET	= 0x104, /* COMWAKE OOB detect register */
+	CMD_CMSAS_OOB_DET	= 0x108, /* COMSAS OOB detect register */
+	CMD_BRST_OOB_DET	= 0x10c, /* burst OOB detect register */
+	CMD_OOB_SPACE	= 0x110, /* OOB space control register */
+	CMD_OOB_BURST	= 0x114, /* OOB burst control register */
+	CMD_PHY_TIMER		= 0x118, /* PHY timer control register */
+	CMD_PHY_CONFIG0	= 0x11c, /* PHY config register 0 */
+	CMD_PHY_CONFIG1	= 0x120, /* PHY config register 1 */
+	CMD_SAS_CTL0		= 0x124, /* SAS control register 0 */
+	CMD_SAS_CTL1		= 0x128, /* SAS control register 1 */
+	CMD_SAS_CTL2		= 0x12c, /* SAS control register 2 */
+	CMD_SAS_CTL3		= 0x130, /* SAS control register 3 */
+	CMD_ID_TEST		= 0x134, /* ID test register */
+	CMD_PL_TIMER		= 0x138, /* PL timer register */
+	CMD_WD_TIMER		= 0x13c, /* WD timer register */
+	CMD_PORT_SEL_COUNT	= 0x140, /* port selector count register */
+	CMD_APP_MEM_CTL	= 0x144, /* Application Memory Control */
+	CMD_XOR_MEM_CTL	= 0x148, /* XOR Block Memory Control */
+	CMD_DMA_MEM_CTL	= 0x14c, /* DMA Block Memory Control */
+	CMD_PORT_MEM_CTL0	= 0x150, /* Port Memory Control 0 */
+	CMD_PORT_MEM_CTL1	= 0x154, /* Port Memory Control 1 */
+	CMD_SATA_PORT_MEM_CTL0	= 0x158, /* SATA Port Memory Control 0 */
+	CMD_SATA_PORT_MEM_CTL1	= 0x15c, /* SATA Port Memory Control 1 */
+	CMD_XOR_MEM_BIST_CTL	= 0x160, /* XOR Memory BIST Control */
+	CMD_XOR_MEM_BIST_STAT	= 0x164, /* XOR Memroy BIST Status */
+	CMD_DMA_MEM_BIST_CTL	= 0x168, /* DMA Memory BIST Control */
+	CMD_DMA_MEM_BIST_STAT	= 0x16c, /* DMA Memory BIST Status */
+	CMD_PORT_MEM_BIST_CTL	= 0x170, /* Port Memory BIST Control */
+	CMD_PORT_MEM_BIST_STAT0 = 0x174, /* Port Memory BIST Status 0 */
+	CMD_PORT_MEM_BIST_STAT1 = 0x178, /* Port Memory BIST Status 1 */
+	CMD_STP_MEM_BIST_CTL	= 0x17c, /* STP Memory BIST Control */
+	CMD_STP_MEM_BIST_STAT0	= 0x180, /* STP Memory BIST Status 0 */
+	CMD_STP_MEM_BIST_STAT1	= 0x184, /* STP Memory BIST Status 1 */
+	CMD_RESET_COUNT		= 0x188, /* Reset Count */
+	CMD_MONTR_DATA_SEL	= 0x18C, /* Monitor Data/Select */
+	CMD_PLL_PHY_CONFIG	= 0x190, /* PLL/PHY Configuration */
+	CMD_PHY_CTL		= 0x194, /* PHY Control and Status */
+	CMD_PHY_TEST_COUNT0	= 0x198, /* Phy Test Count 0 */
+	CMD_PHY_TEST_COUNT1	= 0x19C, /* Phy Test Count 1 */
+	CMD_PHY_TEST_COUNT2	= 0x1A0, /* Phy Test Count 2 */
+	CMD_APP_ERR_CONFIG	= 0x1A4, /* Application Error Configuration */
+	CMD_PND_FIFO_CTL0	= 0x1A8, /* Pending FIFO Control 0 */
+	CMD_HOST_CTL		= 0x1AC, /* Host Control Status */
+	CMD_HOST_WR_DATA	= 0x1B0, /* Host Write Data */
+	CMD_HOST_RD_DATA	= 0x1B4, /* Host Read Data */
+	CMD_PHY_MODE_21		= 0x1B8, /* Phy Mode 21 */
+	CMD_SL_MODE0		= 0x1BC, /* SL Mode 0 */
+	CMD_SL_MODE1		= 0x1C0, /* SL Mode 1 */
+	CMD_PND_FIFO_CTL1	= 0x1C4, /* Pending FIFO Control 1 */
+};
+
+enum mvs_info_flags {
+	MVF_MSI		= (1U << 0),	/* MSI is enabled */
+	MVF_PHY_PWR_FIX	= (1U << 1),	/* bug workaround */
+	MVF_FLAG_SOC		= (1U << 2),	/* SoC integrated controllers */
+};
+
+enum mvs_event_flags {
+	PHY_PLUG_EVENT	= (3U),
+	PHY_PLUG_IN		= (1U << 0),	/* phy plug in */
+	PHY_PLUG_OUT		= (1U << 1),	/* phy plug out */
+};
+
+enum mvs_port_type {
+	PORT_TGT_MASK	=  (1U << 5),
+	PORT_INIT_PORT	=  (1U << 4),
+	PORT_TGT_PORT	=  (1U << 3),
+	PORT_INIT_TGT_PORT = (PORT_INIT_PORT | PORT_TGT_PORT),
+	PORT_TYPE_SAS	=  (1U << 1),
+	PORT_TYPE_SATA	=  (1U << 0),
+};
+
+/* Command Table Format */
+enum ct_format {
+	/* SSP */
+	SSP_F_H		=  0x00,
+	SSP_F_IU	=  0x18,
+	SSP_F_MAX	=  0x4D,
+	/* STP */
+	STP_CMD_FIS	=  0x00,
+	STP_ATAPI_CMD	=  0x40,
+	STP_F_MAX	=  0x10,
+	/* SMP */
+	SMP_F_T		=  0x00,
+	SMP_F_DEP	=  0x01,
+	SMP_F_MAX	=  0x101,
+};
+
+enum status_buffer {
+	SB_EIR_OFF	=  0x00,	/* Error Information Record */
+	SB_RFB_OFF	=  0x08,	/* Response Frame Buffer */
+	SB_RFB_MAX	=  0x400,	/* RFB size*/
+};
+
+enum error_info_rec {
+	CMD_ISS_STPD	= (1U << 31),	/* Cmd Issue Stopped */
+	CMD_PI_ERR	= (1U << 30),	/* Protection info error.  see flags2 */
+	RSP_OVER	= (1U << 29),	/* rsp buffer overflow */
+	RETRY_LIM	= (1U << 28),	/* FIS/frame retry limit exceeded */
+	UNK_FIS 	= (1U << 27),	/* unknown FIS */
+	DMA_TERM	= (1U << 26),	/* DMA terminate primitive rx'd */
+	SYNC_ERR	= (1U << 25),	/* SYNC rx'd during frame xmit */
+	TFILE_ERR	= (1U << 24),	/* SATA taskfile Error bit set */
+	R_ERR		= (1U << 23),	/* SATA returned R_ERR prim */
+	RD_OFS		= (1U << 20),	/* Read DATA frame invalid offset */
+	XFER_RDY_OFS	= (1U << 19),	/* XFER_RDY offset error */
+	UNEXP_XFER_RDY	= (1U << 18),	/* unexpected XFER_RDY error */
+	DATA_OVER_UNDER = (1U << 16),	/* data overflow/underflow */
+	INTERLOCK	= (1U << 15),	/* interlock error */
+	NAK		= (1U << 14),	/* NAK rx'd */
+	ACK_NAK_TO	= (1U << 13),	/* ACK/NAK timeout */
+	CXN_CLOSED	= (1U << 12),	/* cxn closed w/out ack/nak */
+	OPEN_TO 	= (1U << 11),	/* I_T nexus lost, open cxn timeout */
+	PATH_BLOCKED	= (1U << 10),	/* I_T nexus lost, pathway blocked */
+	NO_DEST 	= (1U << 9),	/* I_T nexus lost, no destination */
+	STP_RES_BSY	= (1U << 8),	/* STP resources busy */
+	BREAK		= (1U << 7),	/* break received */
+	BAD_DEST	= (1U << 6),	/* bad destination */
+	BAD_PROTO	= (1U << 5),	/* protocol not supported */
+	BAD_RATE	= (1U << 4),	/* cxn rate not supported */
+	WRONG_DEST	= (1U << 3),	/* wrong destination error */
+	CREDIT_TO	= (1U << 2),	/* credit timeout */
+	WDOG_TO 	= (1U << 1),	/* watchdog timeout */
+	BUF_PAR 	= (1U << 0),	/* buffer parity error */
+};
+
+enum error_info_rec_2 {
+	SLOT_BSY_ERR	= (1U << 31),	/* Slot Busy Error */
+	GRD_CHK_ERR	= (1U << 14),	/* Guard Check Error */
+	APP_CHK_ERR	= (1U << 13),	/* Application Check error */
+	REF_CHK_ERR	= (1U << 12),	/* Reference Check Error */
+	USR_BLK_NM	= (1U << 0),	/* User Block Number */
+};
+
+enum pci_cfg_register_bits {
+	PCTL_PWR_OFF	= (0xFU << 24),
+	PCTL_COM_ON	= (0xFU << 20),
+	PCTL_LINK_RST	= (0xFU << 16),
+	PCTL_LINK_OFFS	= (16),
+	PCTL_PHY_DSBL	= (0xFU << 12),
+	PCTL_PHY_DSBL_OFFS	= (12),
+	PRD_REQ_SIZE	= (0x4000),
+	PRD_REQ_MASK	= (0x00007000),
+	PLS_NEG_LINK_WD		= (0x3FU << 4),
+	PLS_NEG_LINK_WD_OFFS	= 4,
+	PLS_LINK_SPD		= (0x0FU << 0),
+	PLS_LINK_SPD_OFFS	= 0,
+};
+
+enum open_frame_protocol {
+	PROTOCOL_SMP	= 0x0,
+	PROTOCOL_SSP	= 0x1,
+	PROTOCOL_STP	= 0x2,
+};
+
+/* define for response frame datapres field */
+enum datapres_field {
+	NO_DATA		= 0,
+	RESPONSE_DATA	= 1,
+	SENSE_DATA	= 2,
+};
+
+/* define task management IU */
+struct mvs_tmf_task{
+	u8 tmf;
+	u16 tag_of_task_to_be_managed;
+};
+#endif
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
new file mode 100644
index 0000000..8646a19
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -0,0 +1,703 @@
+/*
+ * Marvell 88SE64xx/88SE94xx pci init
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+
+#include "mv_sas.h"
+
+static struct scsi_transport_template *mvs_stt;
+static const struct mvs_chip_info mvs_chips[] = {
+	[chip_6320] =	{ 1, 2, 0x400, 17, 16,  9, &mvs_64xx_dispatch, },
+	[chip_6440] =	{ 1, 4, 0x400, 17, 16,  9, &mvs_64xx_dispatch, },
+	[chip_6485] =	{ 1, 8, 0x800, 33, 32, 10, &mvs_64xx_dispatch, },
+	[chip_9180] =	{ 2, 4, 0x800, 17, 64,  9, &mvs_94xx_dispatch, },
+	[chip_9480] =	{ 2, 4, 0x800, 17, 64,  9, &mvs_94xx_dispatch, },
+};
+
+#define SOC_SAS_NUM 2
+
+static struct scsi_host_template mvs_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.queuecommand		= sas_queuecommand,
+	.target_alloc		= sas_target_alloc,
+	.slave_configure	= mvs_slave_configure,
+	.slave_destroy		= sas_slave_destroy,
+	.scan_finished		= mvs_scan_finished,
+	.scan_start		= mvs_scan_start,
+	.change_queue_depth	= sas_change_queue_depth,
+	.change_queue_type	= sas_change_queue_type,
+	.bios_param		= sas_bios_param,
+	.can_queue		= 1,
+	.cmd_per_lun		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.eh_device_reset_handler	= sas_eh_device_reset_handler,
+	.eh_bus_reset_handler	= sas_eh_bus_reset_handler,
+	.slave_alloc		= mvs_slave_alloc,
+	.target_destroy		= sas_target_destroy,
+	.ioctl			= sas_ioctl,
+};
+
+static struct sas_domain_function_template mvs_transport_ops = {
+	.lldd_dev_found 	= mvs_dev_found,
+	.lldd_dev_gone	= mvs_dev_gone,
+
+	.lldd_execute_task	= mvs_queue_command,
+	.lldd_control_phy	= mvs_phy_control,
+
+	.lldd_abort_task	= mvs_abort_task,
+	.lldd_abort_task_set    = mvs_abort_task_set,
+	.lldd_clear_aca         = mvs_clear_aca,
+       .lldd_clear_task_set    = mvs_clear_task_set,
+	.lldd_I_T_nexus_reset	= mvs_I_T_nexus_reset,
+	.lldd_lu_reset 		= mvs_lu_reset,
+	.lldd_query_task	= mvs_query_task,
+
+	.lldd_port_formed	= mvs_port_formed,
+	.lldd_port_deformed     = mvs_port_deformed,
+
+};
+
+static void __devinit mvs_phy_init(struct mvs_info *mvi, int phy_id)
+{
+	struct mvs_phy *phy = &mvi->phy[phy_id];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+	phy->mvi = mvi;
+	init_timer(&phy->timer);
+	sas_phy->enabled = (phy_id < mvi->chip->n_phy) ? 1 : 0;
+	sas_phy->class = SAS;
+	sas_phy->iproto = SAS_PROTOCOL_ALL;
+	sas_phy->tproto = 0;
+	sas_phy->type = PHY_TYPE_PHYSICAL;
+	sas_phy->role = PHY_ROLE_INITIATOR;
+	sas_phy->oob_mode = OOB_NOT_CONNECTED;
+	sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+
+	sas_phy->id = phy_id;
+	sas_phy->sas_addr = &mvi->sas_addr[0];
+	sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+	sas_phy->ha = (struct sas_ha_struct *)mvi->shost->hostdata;
+	sas_phy->lldd_phy = phy;
+}
+
+static void mvs_free(struct mvs_info *mvi)
+{
+	int i;
+	struct mvs_wq *mwq;
+	int slot_nr;
+
+	if (!mvi)
+		return;
+
+	if (mvi->flags & MVF_FLAG_SOC)
+		slot_nr = MVS_SOC_SLOTS;
+	else
+		slot_nr = MVS_SLOTS;
+
+	for (i = 0; i < mvi->tags_num; i++) {
+		struct mvs_slot_info *slot = &mvi->slot_info[i];
+		if (slot->buf)
+			dma_free_coherent(mvi->dev, MVS_SLOT_BUF_SZ,
+					  slot->buf, slot->buf_dma);
+	}
+
+	if (mvi->tx)
+		dma_free_coherent(mvi->dev,
+				  sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+				  mvi->tx, mvi->tx_dma);
+	if (mvi->rx_fis)
+		dma_free_coherent(mvi->dev, MVS_RX_FISL_SZ,
+				  mvi->rx_fis, mvi->rx_fis_dma);
+	if (mvi->rx)
+		dma_free_coherent(mvi->dev,
+				  sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+				  mvi->rx, mvi->rx_dma);
+	if (mvi->slot)
+		dma_free_coherent(mvi->dev,
+				  sizeof(*mvi->slot) * slot_nr,
+				  mvi->slot, mvi->slot_dma);
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	if (mvi->bulk_buffer)
+		dma_free_coherent(mvi->dev, TRASH_BUCKET_SIZE,
+				  mvi->bulk_buffer, mvi->bulk_buffer_dma);
+#endif
+
+	MVS_CHIP_DISP->chip_iounmap(mvi);
+	if (mvi->shost)
+		scsi_host_put(mvi->shost);
+	list_for_each_entry(mwq, &mvi->wq_list, entry)
+		cancel_delayed_work(&mwq->work_q);
+	kfree(mvi);
+}
+
+#ifdef MVS_USE_TASKLET
+struct tasklet_struct	mv_tasklet;
+static void mvs_tasklet(unsigned long opaque)
+{
+	unsigned long flags;
+	u32 stat;
+	u16 core_nr, i = 0;
+
+	struct mvs_info *mvi;
+	struct sas_ha_struct *sha = (struct sas_ha_struct *)opaque;
+
+	core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[0];
+
+	if (unlikely(!mvi))
+		BUG_ON(1);
+
+	for (i = 0; i < core_nr; i++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[i];
+		stat = MVS_CHIP_DISP->isr_status(mvi, mvi->irq);
+		if (stat)
+			MVS_CHIP_DISP->isr(mvi, mvi->irq, stat);
+	}
+
+}
+#endif
+
+static irqreturn_t mvs_interrupt(int irq, void *opaque)
+{
+	u32 core_nr, i = 0;
+	u32 stat;
+	struct mvs_info *mvi;
+	struct sas_ha_struct *sha = opaque;
+
+	core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[0];
+
+	if (unlikely(!mvi))
+		return IRQ_NONE;
+
+	stat = MVS_CHIP_DISP->isr_status(mvi, irq);
+	if (!stat)
+		return IRQ_NONE;
+
+#ifdef MVS_USE_TASKLET
+	tasklet_schedule(&mv_tasklet);
+#else
+	for (i = 0; i < core_nr; i++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[i];
+		MVS_CHIP_DISP->isr(mvi, irq, stat);
+	}
+#endif
+	return IRQ_HANDLED;
+}
+
+static int __devinit mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost)
+{
+	int i, slot_nr;
+
+	if (mvi->flags & MVF_FLAG_SOC)
+		slot_nr = MVS_SOC_SLOTS;
+	else
+		slot_nr = MVS_SLOTS;
+
+	spin_lock_init(&mvi->lock);
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		mvs_phy_init(mvi, i);
+		mvi->port[i].wide_port_phymap = 0;
+		mvi->port[i].port_attached = 0;
+		INIT_LIST_HEAD(&mvi->port[i].list);
+	}
+	for (i = 0; i < MVS_MAX_DEVICES; i++) {
+		mvi->devices[i].taskfileset = MVS_ID_NOT_MAPPED;
+		mvi->devices[i].dev_type = NO_DEVICE;
+		mvi->devices[i].device_id = i;
+		mvi->devices[i].dev_status = MVS_DEV_NORMAL;
+	}
+
+	/*
+	 * alloc and init our DMA areas
+	 */
+	mvi->tx = dma_alloc_coherent(mvi->dev,
+				     sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+				     &mvi->tx_dma, GFP_KERNEL);
+	if (!mvi->tx)
+		goto err_out;
+	memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ);
+	mvi->rx_fis = dma_alloc_coherent(mvi->dev, MVS_RX_FISL_SZ,
+					 &mvi->rx_fis_dma, GFP_KERNEL);
+	if (!mvi->rx_fis)
+		goto err_out;
+	memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
+
+	mvi->rx = dma_alloc_coherent(mvi->dev,
+				     sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+				     &mvi->rx_dma, GFP_KERNEL);
+	if (!mvi->rx)
+		goto err_out;
+	memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
+	mvi->rx[0] = cpu_to_le32(0xfff);
+	mvi->rx_cons = 0xfff;
+
+	mvi->slot = dma_alloc_coherent(mvi->dev,
+				       sizeof(*mvi->slot) * slot_nr,
+				       &mvi->slot_dma, GFP_KERNEL);
+	if (!mvi->slot)
+		goto err_out;
+	memset(mvi->slot, 0, sizeof(*mvi->slot) * slot_nr);
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	mvi->bulk_buffer = dma_alloc_coherent(mvi->dev,
+				       TRASH_BUCKET_SIZE,
+				       &mvi->bulk_buffer_dma, GFP_KERNEL);
+	if (!mvi->bulk_buffer)
+		goto err_out;
+#endif
+	for (i = 0; i < slot_nr; i++) {
+		struct mvs_slot_info *slot = &mvi->slot_info[i];
+
+		slot->buf = dma_alloc_coherent(mvi->dev, MVS_SLOT_BUF_SZ,
+					       &slot->buf_dma, GFP_KERNEL);
+		if (!slot->buf) {
+			printk(KERN_DEBUG"failed to allocate slot->buf.\n");
+			goto err_out;
+		}
+		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+		++mvi->tags_num;
+	}
+	/* Initialize tags */
+	mvs_tag_init(mvi);
+	return 0;
+err_out:
+	return 1;
+}
+
+
+int mvs_ioremap(struct mvs_info *mvi, int bar, int bar_ex)
+{
+	unsigned long res_start, res_len, res_flag, res_flag_ex = 0;
+	struct pci_dev *pdev = mvi->pdev;
+	if (bar_ex != -1) {
+		/*
+		 * ioremap main and peripheral registers
+		 */
+		res_start = pci_resource_start(pdev, bar_ex);
+		res_len = pci_resource_len(pdev, bar_ex);
+		if (!res_start || !res_len)
+			goto err_out;
+
+		res_flag_ex = pci_resource_flags(pdev, bar_ex);
+		if (res_flag_ex & IORESOURCE_MEM) {
+			if (res_flag_ex & IORESOURCE_CACHEABLE)
+				mvi->regs_ex = ioremap(res_start, res_len);
+			else
+				mvi->regs_ex = ioremap_nocache(res_start,
+						res_len);
+		} else
+			mvi->regs_ex = (void *)res_start;
+		if (!mvi->regs_ex)
+			goto err_out;
+	}
+
+	res_start = pci_resource_start(pdev, bar);
+	res_len = pci_resource_len(pdev, bar);
+	if (!res_start || !res_len)
+		goto err_out;
+
+	res_flag = pci_resource_flags(pdev, bar);
+	if (res_flag & IORESOURCE_CACHEABLE)
+		mvi->regs = ioremap(res_start, res_len);
+	else
+		mvi->regs = ioremap_nocache(res_start, res_len);
+
+	if (!mvi->regs) {
+		if (mvi->regs_ex && (res_flag_ex & IORESOURCE_MEM))
+			iounmap(mvi->regs_ex);
+		mvi->regs_ex = NULL;
+		goto err_out;
+	}
+
+	return 0;
+err_out:
+	return -1;
+}
+
+void mvs_iounmap(void __iomem *regs)
+{
+	iounmap(regs);
+}
+
+static struct mvs_info *__devinit mvs_pci_alloc(struct pci_dev *pdev,
+				const struct pci_device_id *ent,
+				struct Scsi_Host *shost, unsigned int id)
+{
+	struct mvs_info *mvi;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+	mvi = kzalloc(sizeof(*mvi) + MVS_SLOTS * sizeof(struct mvs_slot_info),
+			GFP_KERNEL);
+	if (!mvi)
+		return NULL;
+
+	mvi->pdev = pdev;
+	mvi->dev = &pdev->dev;
+	mvi->chip_id = ent->driver_data;
+	mvi->chip = &mvs_chips[mvi->chip_id];
+	INIT_LIST_HEAD(&mvi->wq_list);
+	mvi->irq = pdev->irq;
+
+	((struct mvs_prv_info *)sha->lldd_ha)->mvi[id] = mvi;
+	((struct mvs_prv_info *)sha->lldd_ha)->n_phy = mvi->chip->n_phy;
+
+	mvi->id = id;
+	mvi->sas = sha;
+	mvi->shost = shost;
+#ifdef MVS_USE_TASKLET
+	tasklet_init(&mv_tasklet, mvs_tasklet, (unsigned long)sha);
+#endif
+
+	if (MVS_CHIP_DISP->chip_ioremap(mvi))
+		goto err_out;
+	if (!mvs_alloc(mvi, shost))
+		return mvi;
+err_out:
+	mvs_free(mvi);
+	return NULL;
+}
+
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+	int rc;
+
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+		if (rc) {
+			rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+			if (rc) {
+				dev_printk(KERN_ERR, &pdev->dev,
+					   "64-bit DMA enable failed\n");
+				return rc;
+			}
+		}
+	} else {
+		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit DMA enable failed\n");
+			return rc;
+		}
+		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit consistent DMA enable failed\n");
+			return rc;
+		}
+	}
+
+	return rc;
+}
+
+static int __devinit mvs_prep_sas_ha_init(struct Scsi_Host *shost,
+				const struct mvs_chip_info *chip_info)
+{
+	int phy_nr, port_nr; unsigned short core_nr;
+	struct asd_sas_phy **arr_phy;
+	struct asd_sas_port **arr_port;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+	core_nr = chip_info->n_host;
+	phy_nr  = core_nr * chip_info->n_phy;
+	port_nr = phy_nr;
+
+	memset(sha, 0x00, sizeof(struct sas_ha_struct));
+	arr_phy  = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
+	arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
+	if (!arr_phy || !arr_port)
+		goto exit_free;
+
+	sha->sas_phy = arr_phy;
+	sha->sas_port = arr_port;
+
+	sha->lldd_ha = kzalloc(sizeof(struct mvs_prv_info), GFP_KERNEL);
+	if (!sha->lldd_ha)
+		goto exit_free;
+
+	((struct mvs_prv_info *)sha->lldd_ha)->n_host = core_nr;
+
+	shost->transportt = mvs_stt;
+	shost->max_id = 128;
+	shost->max_lun = ~0;
+	shost->max_channel = 1;
+	shost->max_cmd_len = 16;
+
+	return 0;
+exit_free:
+	kfree(arr_phy);
+	kfree(arr_port);
+	return -1;
+
+}
+
+static void  __devinit mvs_post_sas_ha_init(struct Scsi_Host *shost,
+			const struct mvs_chip_info *chip_info)
+{
+	int can_queue, i = 0, j = 0;
+	struct mvs_info *mvi = NULL;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	unsigned short nr_core = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+
+	for (j = 0; j < nr_core; j++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[j];
+		for (i = 0; i < chip_info->n_phy; i++) {
+			sha->sas_phy[j * chip_info->n_phy  + i] =
+				&mvi->phy[i].sas_phy;
+			sha->sas_port[j * chip_info->n_phy + i] =
+				&mvi->port[i].sas_port;
+		}
+	}
+
+	sha->sas_ha_name = DRV_NAME;
+	sha->dev = mvi->dev;
+	sha->lldd_module = THIS_MODULE;
+	sha->sas_addr = &mvi->sas_addr[0];
+
+	sha->num_phys = nr_core * chip_info->n_phy;
+
+	sha->lldd_max_execute_num = 1;
+
+	if (mvi->flags & MVF_FLAG_SOC)
+		can_queue = MVS_SOC_CAN_QUEUE;
+	else
+		can_queue = MVS_CAN_QUEUE;
+
+	sha->lldd_queue_size = can_queue;
+	shost->can_queue = can_queue;
+	mvi->shost->cmd_per_lun = MVS_SLOTS/sha->num_phys;
+	sha->core.shost = mvi->shost;
+}
+
+static void mvs_init_sas_add(struct mvs_info *mvi)
+{
+	u8 i;
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		mvi->phy[i].dev_sas_addr = 0x5005043011ab0000ULL;
+		mvi->phy[i].dev_sas_addr =
+			cpu_to_be64((u64)(*(u64 *)&mvi->phy[i].dev_sas_addr));
+	}
+
+	memcpy(mvi->sas_addr, &mvi->phy[0].dev_sas_addr, SAS_ADDR_SIZE);
+}
+
+static int __devinit mvs_pci_init(struct pci_dev *pdev,
+				  const struct pci_device_id *ent)
+{
+	unsigned int rc, nhost = 0;
+	struct mvs_info *mvi;
+	irq_handler_t irq_handler = mvs_interrupt;
+	struct Scsi_Host *shost = NULL;
+	const struct mvs_chip_info *chip;
+
+	dev_printk(KERN_INFO, &pdev->dev,
+		"mvsas: driver version %s\n", DRV_VERSION);
+	rc = pci_enable_device(pdev);
+	if (rc)
+		goto err_out_enable;
+
+	pci_set_master(pdev);
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc)
+		goto err_out_disable;
+
+	rc = pci_go_64(pdev);
+	if (rc)
+		goto err_out_regions;
+
+	shost = scsi_host_alloc(&mvs_sht, sizeof(void *));
+	if (!shost) {
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	chip = &mvs_chips[ent->driver_data];
+	SHOST_TO_SAS_HA(shost) =
+		kcalloc(1, sizeof(struct sas_ha_struct), GFP_KERNEL);
+	if (!SHOST_TO_SAS_HA(shost)) {
+		kfree(shost);
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	rc = mvs_prep_sas_ha_init(shost, chip);
+	if (rc) {
+		kfree(shost);
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
+
+	do {
+		mvi = mvs_pci_alloc(pdev, ent, shost, nhost);
+		if (!mvi) {
+			rc = -ENOMEM;
+			goto err_out_regions;
+		}
+
+		mvs_init_sas_add(mvi);
+
+		mvi->instance = nhost;
+		rc = MVS_CHIP_DISP->chip_init(mvi);
+		if (rc) {
+			mvs_free(mvi);
+			goto err_out_regions;
+		}
+		nhost++;
+	} while (nhost < chip->n_host);
+
+	mvs_post_sas_ha_init(shost, chip);
+
+	rc = scsi_add_host(shost, &pdev->dev);
+	if (rc)
+		goto err_out_shost;
+
+	rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
+	if (rc)
+		goto err_out_shost;
+	rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED,
+		DRV_NAME, SHOST_TO_SAS_HA(shost));
+	if (rc)
+		goto err_not_sas;
+
+	MVS_CHIP_DISP->interrupt_enable(mvi);
+
+	scsi_scan_host(mvi->shost);
+
+	return 0;
+
+err_not_sas:
+	sas_unregister_ha(SHOST_TO_SAS_HA(shost));
+err_out_shost:
+	scsi_remove_host(mvi->shost);
+err_out_regions:
+	pci_release_regions(pdev);
+err_out_disable:
+	pci_disable_device(pdev);
+err_out_enable:
+	return rc;
+}
+
+static void __devexit mvs_pci_remove(struct pci_dev *pdev)
+{
+	unsigned short core_nr, i = 0;
+	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+	struct mvs_info *mvi = NULL;
+
+	core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[0];
+
+#ifdef MVS_USE_TASKLET
+	tasklet_kill(&mv_tasklet);
+#endif
+
+	pci_set_drvdata(pdev, NULL);
+	sas_unregister_ha(sha);
+	sas_remove_host(mvi->shost);
+	scsi_remove_host(mvi->shost);
+
+	MVS_CHIP_DISP->interrupt_disable(mvi);
+	free_irq(mvi->irq, sha);
+	for (i = 0; i < core_nr; i++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[i];
+		mvs_free(mvi);
+	}
+	kfree(sha->sas_phy);
+	kfree(sha->sas_port);
+	kfree(sha);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	return;
+}
+
+static struct pci_device_id __devinitdata mvs_pci_table[] = {
+	{ PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
+	{ PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
+	{
+		.vendor 	= PCI_VENDOR_ID_MARVELL,
+		.device 	= 0x6440,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= 0x6480,
+		.class		= 0,
+		.class_mask	= 0,
+		.driver_data	= chip_6485,
+	},
+	{ PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
+	{ PCI_VDEVICE(MARVELL, 0x6485), chip_6485 },
+	{ PCI_VDEVICE(MARVELL, 0x9480), chip_9480 },
+	{ PCI_VDEVICE(MARVELL, 0x9180), chip_9180 },
+
+	{ }	/* terminate list */
+};
+
+static struct pci_driver mvs_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= mvs_pci_table,
+	.probe		= mvs_pci_init,
+	.remove		= __devexit_p(mvs_pci_remove),
+};
+
+/* task handler */
+struct task_struct *mvs_th;
+static int __init mvs_init(void)
+{
+	int rc;
+	mvs_stt = sas_domain_attach_transport(&mvs_transport_ops);
+	if (!mvs_stt)
+		return -ENOMEM;
+
+	rc = pci_register_driver(&mvs_pci_driver);
+
+	if (rc)
+		goto err_out;
+
+	return 0;
+
+err_out:
+	sas_release_transport(mvs_stt);
+	return rc;
+}
+
+static void __exit mvs_exit(void)
+{
+	pci_unregister_driver(&mvs_pci_driver);
+	sas_release_transport(mvs_stt);
+}
+
+module_init(mvs_init);
+module_exit(mvs_exit);
+
+MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION("Marvell 88SE6440 SAS/SATA controller driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+#ifdef CONFIG_PCI
+MODULE_DEVICE_TABLE(pci, mvs_pci_table);
+#endif
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
new file mode 100644
index 0000000..0d21386
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -0,0 +1,2154 @@
+/*
+ * Marvell 88SE64xx/88SE94xx main function
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include "mv_sas.h"
+
+static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
+{
+	if (task->lldd_task) {
+		struct mvs_slot_info *slot;
+		slot = task->lldd_task;
+		*tag = slot->slot_tag;
+		return 1;
+	}
+	return 0;
+}
+
+void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
+{
+	void *bitmap = &mvi->tags;
+	clear_bit(tag, bitmap);
+}
+
+void mvs_tag_free(struct mvs_info *mvi, u32 tag)
+{
+	mvs_tag_clear(mvi, tag);
+}
+
+void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
+{
+	void *bitmap = &mvi->tags;
+	set_bit(tag, bitmap);
+}
+
+inline int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
+{
+	unsigned int index, tag;
+	void *bitmap = &mvi->tags;
+
+	index = find_first_zero_bit(bitmap, mvi->tags_num);
+	tag = index;
+	if (tag >= mvi->tags_num)
+		return -SAS_QUEUE_FULL;
+	mvs_tag_set(mvi, tag);
+	*tag_out = tag;
+	return 0;
+}
+
+void mvs_tag_init(struct mvs_info *mvi)
+{
+	int i;
+	for (i = 0; i < mvi->tags_num; ++i)
+		mvs_tag_clear(mvi, i);
+}
+
+void mvs_hexdump(u32 size, u8 *data, u32 baseaddr)
+{
+	u32 i;
+	u32 run;
+	u32 offset;
+
+	offset = 0;
+	while (size) {
+		printk(KERN_DEBUG"%08X : ", baseaddr + offset);
+		if (size >= 16)
+			run = 16;
+		else
+			run = size;
+		size -= run;
+		for (i = 0; i < 16; i++) {
+			if (i < run)
+				printk(KERN_DEBUG"%02X ", (u32)data[i]);
+			else
+				printk(KERN_DEBUG"   ");
+		}
+		printk(KERN_DEBUG": ");
+		for (i = 0; i < run; i++)
+			printk(KERN_DEBUG"%c",
+				isalnum(data[i]) ? data[i] : '.');
+		printk(KERN_DEBUG"\n");
+		data = &data[16];
+		offset += run;
+	}
+	printk(KERN_DEBUG"\n");
+}
+
+#if (_MV_DUMP > 1)
+static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
+				   enum sas_protocol proto)
+{
+	u32 offset;
+	struct mvs_slot_info *slot = &mvi->slot_info[tag];
+
+	offset = slot->cmd_size + MVS_OAF_SZ +
+	    MVS_CHIP_DISP->prd_size() * slot->n_elem;
+	dev_printk(KERN_DEBUG, mvi->dev, "+---->Status buffer[%d] :\n",
+			tag);
+	mvs_hexdump(32, (u8 *) slot->response,
+		    (u32) slot->buf_dma + offset);
+}
+#endif
+
+static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
+				enum sas_protocol proto)
+{
+#if (_MV_DUMP > 1)
+	u32 sz, w_ptr;
+	u64 addr;
+	struct mvs_slot_info *slot = &mvi->slot_info[tag];
+
+	/*Delivery Queue */
+	sz = MVS_CHIP_SLOT_SZ;
+	w_ptr = slot->tx;
+	addr = mvi->tx_dma;
+	dev_printk(KERN_DEBUG, mvi->dev,
+		"Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr);
+	dev_printk(KERN_DEBUG, mvi->dev,
+		"Delivery Queue Base Address=0x%llX (PA)"
+		"(tx_dma=0x%llX), Entry=%04d\n",
+		addr, (unsigned long long)mvi->tx_dma, w_ptr);
+	mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]),
+			(u32) mvi->tx_dma + sizeof(u32) * w_ptr);
+	/*Command List */
+	addr = mvi->slot_dma;
+	dev_printk(KERN_DEBUG, mvi->dev,
+		"Command List Base Address=0x%llX (PA)"
+		"(slot_dma=0x%llX), Header=%03d\n",
+		addr, (unsigned long long)slot->buf_dma, tag);
+	dev_printk(KERN_DEBUG, mvi->dev, "Command Header[%03d]:\n", tag);
+	/*mvs_cmd_hdr */
+	mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]),
+		(u32) mvi->slot_dma + tag * sizeof(struct mvs_cmd_hdr));
+	/*1.command table area */
+	dev_printk(KERN_DEBUG, mvi->dev, "+---->Command Table :\n");
+	mvs_hexdump(slot->cmd_size, (u8 *) slot->buf, (u32) slot->buf_dma);
+	/*2.open address frame area */
+	dev_printk(KERN_DEBUG, mvi->dev, "+---->Open Address Frame :\n");
+	mvs_hexdump(MVS_OAF_SZ, (u8 *) slot->buf + slot->cmd_size,
+				(u32) slot->buf_dma + slot->cmd_size);
+	/*3.status buffer */
+	mvs_hba_sb_dump(mvi, tag, proto);
+	/*4.PRD table */
+	dev_printk(KERN_DEBUG, mvi->dev, "+---->PRD table :\n");
+	mvs_hexdump(MVS_CHIP_DISP->prd_size() * slot->n_elem,
+		(u8 *) slot->buf + slot->cmd_size + MVS_OAF_SZ,
+		(u32) slot->buf_dma + slot->cmd_size + MVS_OAF_SZ);
+#endif
+}
+
+static void mvs_hba_cq_dump(struct mvs_info *mvi)
+{
+#if (_MV_DUMP > 2)
+	u64 addr;
+	void __iomem *regs = mvi->regs;
+	u32 entry = mvi->rx_cons + 1;
+	u32 rx_desc = le32_to_cpu(mvi->rx[entry]);
+
+	/*Completion Queue */
+	addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO);
+	dev_printk(KERN_DEBUG, mvi->dev, "Completion Task = 0x%p\n",
+		   mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
+	dev_printk(KERN_DEBUG, mvi->dev,
+		"Completion List Base Address=0x%llX (PA), "
+		"CQ_Entry=%04d, CQ_WP=0x%08X\n",
+		addr, entry - 1, mvi->rx[0]);
+	mvs_hexdump(sizeof(u32), (u8 *)(&rx_desc),
+		    mvi->rx_dma + sizeof(u32) * entry);
+#endif
+}
+
+void mvs_get_sas_addr(void *buf, u32 buflen)
+{
+	/*memcpy(buf, "\x50\x05\x04\x30\x11\xab\x64\x40", 8);*/
+}
+
+struct mvs_info *mvs_find_dev_mvi(struct domain_device *dev)
+{
+	unsigned long i = 0, j = 0, hi = 0;
+	struct sas_ha_struct *sha = dev->port->ha;
+	struct mvs_info *mvi = NULL;
+	struct asd_sas_phy *phy;
+
+	while (sha->sas_port[i]) {
+		if (sha->sas_port[i] == dev->port) {
+			phy =  container_of(sha->sas_port[i]->phy_list.next,
+				struct asd_sas_phy, port_phy_el);
+			j = 0;
+			while (sha->sas_phy[j]) {
+				if (sha->sas_phy[j] == phy)
+					break;
+				j++;
+			}
+			break;
+		}
+		i++;
+	}
+	hi = j/((struct mvs_prv_info *)sha->lldd_ha)->n_phy;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[hi];
+
+	return mvi;
+
+}
+
+/* FIXME */
+int mvs_find_dev_phyno(struct domain_device *dev, int *phyno)
+{
+	unsigned long i = 0, j = 0, n = 0, num = 0;
+	struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+	struct sas_ha_struct *sha = dev->port->ha;
+
+	while (sha->sas_port[i]) {
+		if (sha->sas_port[i] == dev->port) {
+			struct asd_sas_phy *phy;
+			list_for_each_entry(phy,
+				&sha->sas_port[i]->phy_list, port_phy_el) {
+				j = 0;
+				while (sha->sas_phy[j]) {
+					if (sha->sas_phy[j] == phy)
+						break;
+					j++;
+				}
+				phyno[n] = (j >= mvi->chip->n_phy) ?
+					(j - mvi->chip->n_phy) : j;
+				num++;
+				n++;
+			}
+			break;
+		}
+		i++;
+	}
+	return num;
+}
+
+static inline void mvs_free_reg_set(struct mvs_info *mvi,
+				struct mvs_device *dev)
+{
+	if (!dev) {
+		mv_printk("device has been free.\n");
+		return;
+	}
+	if (dev->runing_req != 0)
+		return;
+	if (dev->taskfileset == MVS_ID_NOT_MAPPED)
+		return;
+	MVS_CHIP_DISP->free_reg_set(mvi, &dev->taskfileset);
+}
+
+static inline u8 mvs_assign_reg_set(struct mvs_info *mvi,
+				struct mvs_device *dev)
+{
+	if (dev->taskfileset != MVS_ID_NOT_MAPPED)
+		return 0;
+	return MVS_CHIP_DISP->assign_reg_set(mvi, &dev->taskfileset);
+}
+
+void mvs_phys_reset(struct mvs_info *mvi, u32 phy_mask, int hard)
+{
+	u32 no;
+	for_each_phy(phy_mask, phy_mask, no) {
+		if (!(phy_mask & 1))
+			continue;
+		MVS_CHIP_DISP->phy_reset(mvi, no, hard);
+	}
+}
+
+/* FIXME: locking? */
+int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+			void *funcdata)
+{
+	int rc = 0, phy_id = sas_phy->id;
+	u32 tmp, i = 0, hi;
+	struct sas_ha_struct *sha = sas_phy->ha;
+	struct mvs_info *mvi = NULL;
+
+	while (sha->sas_phy[i]) {
+		if (sha->sas_phy[i] == sas_phy)
+			break;
+		i++;
+	}
+	hi = i/((struct mvs_prv_info *)sha->lldd_ha)->n_phy;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[hi];
+
+	switch (func) {
+	case PHY_FUNC_SET_LINK_RATE:
+		MVS_CHIP_DISP->phy_set_link_rate(mvi, phy_id, funcdata);
+		break;
+
+	case PHY_FUNC_HARD_RESET:
+		tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, phy_id);
+		if (tmp & PHY_RST_HARD)
+			break;
+		MVS_CHIP_DISP->phy_reset(mvi, phy_id, 1);
+		break;
+
+	case PHY_FUNC_LINK_RESET:
+		MVS_CHIP_DISP->phy_enable(mvi, phy_id);
+		MVS_CHIP_DISP->phy_reset(mvi, phy_id, 0);
+		break;
+
+	case PHY_FUNC_DISABLE:
+		MVS_CHIP_DISP->phy_disable(mvi, phy_id);
+		break;
+	case PHY_FUNC_RELEASE_SPINUP_HOLD:
+	default:
+		rc = -EOPNOTSUPP;
+	}
+	msleep(200);
+	return rc;
+}
+
+void __devinit mvs_set_sas_addr(struct mvs_info *mvi, int port_id,
+				u32 off_lo, u32 off_hi, u64 sas_addr)
+{
+	u32 lo = (u32)sas_addr;
+	u32 hi = (u32)(sas_addr>>32);
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, port_id, off_lo);
+	MVS_CHIP_DISP->write_port_cfg_data(mvi, port_id, lo);
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, port_id, off_hi);
+	MVS_CHIP_DISP->write_port_cfg_data(mvi, port_id, hi);
+}
+
+static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+	struct sas_ha_struct *sas_ha;
+	if (!phy->phy_attached)
+		return;
+
+	if (!(phy->att_dev_info & PORT_DEV_TRGT_MASK)
+		&& phy->phy_type & PORT_TYPE_SAS) {
+		return;
+	}
+
+	sas_ha = mvi->sas;
+	sas_ha->notify_phy_event(sas_phy, PHYE_OOB_DONE);
+
+	if (sas_phy->phy) {
+		struct sas_phy *sphy = sas_phy->phy;
+
+		sphy->negotiated_linkrate = sas_phy->linkrate;
+		sphy->minimum_linkrate = phy->minimum_linkrate;
+		sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+		sphy->maximum_linkrate = phy->maximum_linkrate;
+		sphy->maximum_linkrate_hw = MVS_CHIP_DISP->phy_max_link_rate();
+	}
+
+	if (phy->phy_type & PORT_TYPE_SAS) {
+		struct sas_identify_frame *id;
+
+		id = (struct sas_identify_frame *)phy->frame_rcvd;
+		id->dev_type = phy->identify.device_type;
+		id->initiator_bits = SAS_PROTOCOL_ALL;
+		id->target_bits = phy->identify.target_port_protocols;
+	} else if (phy->phy_type & PORT_TYPE_SATA) {
+		/*Nothing*/
+	}
+	mv_dprintk("phy %d byte dmaded.\n", i + mvi->id * mvi->chip->n_phy);
+
+	sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
+
+	mvi->sas->notify_port_event(sas_phy,
+				   PORTE_BYTES_DMAED);
+}
+
+int mvs_slave_alloc(struct scsi_device *scsi_dev)
+{
+	struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+	if (dev_is_sata(dev)) {
+		/* We don't need to rescan targets
+		 * if REPORT_LUNS request is failed
+		 */
+		if (scsi_dev->lun > 0)
+			return -ENXIO;
+		scsi_dev->tagged_supported = 1;
+	}
+
+	return sas_slave_alloc(scsi_dev);
+}
+
+int mvs_slave_configure(struct scsi_device *sdev)
+{
+	struct domain_device *dev = sdev_to_domain_dev(sdev);
+	int ret = sas_slave_configure(sdev);
+
+	if (ret)
+		return ret;
+	if (dev_is_sata(dev)) {
+		/* may set PIO mode */
+	#if MV_DISABLE_NCQ
+		struct ata_port *ap = dev->sata_dev.ap;
+		struct ata_device *adev = ap->link.device;
+		adev->flags |= ATA_DFLAG_NCQ_OFF;
+		scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
+	#endif
+	}
+	return 0;
+}
+
+void mvs_scan_start(struct Scsi_Host *shost)
+{
+	int i, j;
+	unsigned short core_nr;
+	struct mvs_info *mvi;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+	core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+
+	for (j = 0; j < core_nr; j++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[j];
+		for (i = 0; i < mvi->chip->n_phy; ++i)
+			mvs_bytes_dmaed(mvi, i);
+	}
+}
+
+int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+	/* give the phy enabling interrupt event time to come in (1s
+	 * is empirically about all it takes) */
+	if (time < HZ)
+		return 0;
+	/* Wait for discovery to finish */
+	scsi_flush_work(shost);
+	return 1;
+}
+
+static int mvs_task_prep_smp(struct mvs_info *mvi,
+			     struct mvs_task_exec_info *tei)
+{
+	int elem, rc, i;
+	struct sas_task *task = tei->task;
+	struct mvs_cmd_hdr *hdr = tei->hdr;
+	struct domain_device *dev = task->dev;
+	struct asd_sas_port *sas_port = dev->port;
+	struct scatterlist *sg_req, *sg_resp;
+	u32 req_len, resp_len, tag = tei->tag;
+	void *buf_tmp;
+	u8 *buf_oaf;
+	dma_addr_t buf_tmp_dma;
+	void *buf_prd;
+	struct mvs_slot_info *slot = &mvi->slot_info[tag];
+	u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+#if _MV_DUMP
+	u8 *buf_cmd;
+	void *from;
+#endif
+	/*
+	 * DMA-map SMP request, response buffers
+	 */
+	sg_req = &task->smp_task.smp_req;
+	elem = dma_map_sg(mvi->dev, sg_req, 1, PCI_DMA_TODEVICE);
+	if (!elem)
+		return -ENOMEM;
+	req_len = sg_dma_len(sg_req);
+
+	sg_resp = &task->smp_task.smp_resp;
+	elem = dma_map_sg(mvi->dev, sg_resp, 1, PCI_DMA_FROMDEVICE);
+	if (!elem) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
+	resp_len = SB_RFB_MAX;
+
+	/* must be in dwords */
+	if ((req_len & 0x3) || (resp_len & 0x3)) {
+		rc = -EINVAL;
+		goto err_out_2;
+	}
+
+	/*
+	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+	 */
+
+	/* region 1: command table area (MVS_SSP_CMD_SZ bytes) ***** */
+	buf_tmp = slot->buf;
+	buf_tmp_dma = slot->buf_dma;
+
+#if _MV_DUMP
+	buf_cmd = buf_tmp;
+	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+	buf_tmp += req_len;
+	buf_tmp_dma += req_len;
+	slot->cmd_size = req_len;
+#else
+	hdr->cmd_tbl = cpu_to_le64(sg_dma_address(sg_req));
+#endif
+
+	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+	buf_oaf = buf_tmp;
+	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_OAF_SZ;
+	buf_tmp_dma += MVS_OAF_SZ;
+
+	/* region 3: PRD table *********************************** */
+	buf_prd = buf_tmp;
+	if (tei->n_elem)
+		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+	else
+		hdr->prd_tbl = 0;
+
+	i = MVS_CHIP_DISP->prd_size() * tei->n_elem;
+	buf_tmp += i;
+	buf_tmp_dma += i;
+
+	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+	slot->response = buf_tmp;
+	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+	if (mvi->flags & MVF_FLAG_SOC)
+		hdr->reserved[0] = 0;
+
+	/*
+	 * Fill in TX ring and command slot header
+	 */
+	slot->tx = mvi->tx_prod;
+	mvi->tx[mvi->tx_prod] = cpu_to_le32((TXQ_CMD_SMP << TXQ_CMD_SHIFT) |
+					TXQ_MODE_I | tag |
+					(sas_port->phy_mask << TXQ_PHY_SHIFT));
+
+	hdr->flags |= flags;
+	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | ((req_len - 4) / 4));
+	hdr->tags = cpu_to_le32(tag);
+	hdr->data_len = 0;
+
+	/* generate open address frame hdr (first 12 bytes) */
+	/* initiator, SMP, ftype 1h */
+	buf_oaf[0] = (1 << 7) | (PROTOCOL_SMP << 4) | 0x01;
+	buf_oaf[1] = dev->linkrate & 0xf;
+	*(u16 *)(buf_oaf + 2) = 0xFFFF;		/* SAS SPEC */
+	memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
+
+	/* fill in PRD (scatter/gather) table, if any */
+	MVS_CHIP_DISP->make_prd(task->scatter, tei->n_elem, buf_prd);
+
+#if _MV_DUMP
+	/* copy cmd table */
+	from = kmap_atomic(sg_page(sg_req), KM_IRQ0);
+	memcpy(buf_cmd, from + sg_req->offset, req_len);
+	kunmap_atomic(from, KM_IRQ0);
+#endif
+	return 0;
+
+err_out_2:
+	dma_unmap_sg(mvi->dev, &tei->task->smp_task.smp_resp, 1,
+		     PCI_DMA_FROMDEVICE);
+err_out:
+	dma_unmap_sg(mvi->dev, &tei->task->smp_task.smp_req, 1,
+		     PCI_DMA_TODEVICE);
+	return rc;
+}
+
+static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
+{
+	struct ata_queued_cmd *qc = task->uldd_task;
+
+	if (qc) {
+		if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+			qc->tf.command == ATA_CMD_FPDMA_READ) {
+			*tag = qc->tag;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static int mvs_task_prep_ata(struct mvs_info *mvi,
+			     struct mvs_task_exec_info *tei)
+{
+	struct sas_task *task = tei->task;
+	struct domain_device *dev = task->dev;
+	struct mvs_device *mvi_dev = dev->lldd_dev;
+	struct mvs_cmd_hdr *hdr = tei->hdr;
+	struct asd_sas_port *sas_port = dev->port;
+	struct mvs_slot_info *slot;
+	void *buf_prd;
+	u32 tag = tei->tag, hdr_tag;
+	u32 flags, del_q;
+	void *buf_tmp;
+	u8 *buf_cmd, *buf_oaf;
+	dma_addr_t buf_tmp_dma;
+	u32 i, req_len, resp_len;
+	const u32 max_resp_len = SB_RFB_MAX;
+
+	if (mvs_assign_reg_set(mvi, mvi_dev) == MVS_ID_NOT_MAPPED) {
+		mv_dprintk("Have not enough regiset for dev %d.\n",
+			mvi_dev->device_id);
+		return -EBUSY;
+	}
+	slot = &mvi->slot_info[tag];
+	slot->tx = mvi->tx_prod;
+	del_q = TXQ_MODE_I | tag |
+		(TXQ_CMD_STP << TXQ_CMD_SHIFT) |
+		(sas_port->phy_mask << TXQ_PHY_SHIFT) |
+		(mvi_dev->taskfileset << TXQ_SRS_SHIFT);
+	mvi->tx[mvi->tx_prod] = cpu_to_le32(del_q);
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	if (task->data_dir == DMA_FROM_DEVICE)
+		flags = (MVS_CHIP_DISP->prd_count() << MCH_PRD_LEN_SHIFT);
+	else
+		flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+#else
+	flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+#endif
+	if (task->ata_task.use_ncq)
+		flags |= MCH_FPDMA;
+	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) {
+		if (task->ata_task.fis.command != ATA_CMD_ID_ATAPI)
+			flags |= MCH_ATAPI;
+	}
+
+	/* FIXME: fill in port multiplier number */
+
+	hdr->flags = cpu_to_le32(flags);
+
+	/* FIXME: the low order order 5 bits for the TAG if enable NCQ */
+	if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr_tag))
+		task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
+	else
+		hdr_tag = tag;
+
+	hdr->tags = cpu_to_le32(hdr_tag);
+
+	hdr->data_len = cpu_to_le32(task->total_xfer_len);
+
+	/*
+	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+	 */
+
+	/* region 1: command table area (MVS_ATA_CMD_SZ bytes) ************** */
+	buf_cmd = buf_tmp = slot->buf;
+	buf_tmp_dma = slot->buf_dma;
+
+	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_ATA_CMD_SZ;
+	buf_tmp_dma += MVS_ATA_CMD_SZ;
+#if _MV_DUMP
+	slot->cmd_size = MVS_ATA_CMD_SZ;
+#endif
+
+	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+	/* used for STP.  unused for SATA? */
+	buf_oaf = buf_tmp;
+	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_OAF_SZ;
+	buf_tmp_dma += MVS_OAF_SZ;
+
+	/* region 3: PRD table ********************************************* */
+	buf_prd = buf_tmp;
+
+	if (tei->n_elem)
+		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+	else
+		hdr->prd_tbl = 0;
+	i = MVS_CHIP_DISP->prd_size() * MVS_CHIP_DISP->prd_count();
+
+	buf_tmp += i;
+	buf_tmp_dma += i;
+
+	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+	/* FIXME: probably unused, for SATA.  kept here just in case
+	 * we get a STP/SATA error information record
+	 */
+	slot->response = buf_tmp;
+	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+	if (mvi->flags & MVF_FLAG_SOC)
+		hdr->reserved[0] = 0;
+
+	req_len = sizeof(struct host_to_dev_fis);
+	resp_len = MVS_SLOT_BUF_SZ - MVS_ATA_CMD_SZ -
+	    sizeof(struct mvs_err_info) - i;
+
+	/* request, response lengths */
+	resp_len = min(resp_len, max_resp_len);
+	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+
+	if (likely(!task->ata_task.device_control_reg_update))
+		task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
+	/* fill in command FIS and ATAPI CDB */
+	memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
+	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
+		memcpy(buf_cmd + STP_ATAPI_CMD,
+			task->ata_task.atapi_packet, 16);
+
+	/* generate open address frame hdr (first 12 bytes) */
+	/* initiator, STP, ftype 1h */
+	buf_oaf[0] = (1 << 7) | (PROTOCOL_STP << 4) | 0x1;
+	buf_oaf[1] = dev->linkrate & 0xf;
+	*(u16 *)(buf_oaf + 2) = cpu_to_be16(mvi_dev->device_id + 1);
+	memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
+
+	/* fill in PRD (scatter/gather) table, if any */
+	MVS_CHIP_DISP->make_prd(task->scatter, tei->n_elem, buf_prd);
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	if (task->data_dir == DMA_FROM_DEVICE)
+		MVS_CHIP_DISP->dma_fix(mvi->bulk_buffer_dma,
+				TRASH_BUCKET_SIZE, tei->n_elem, buf_prd);
+#endif
+	return 0;
+}
+
+static int mvs_task_prep_ssp(struct mvs_info *mvi,
+			     struct mvs_task_exec_info *tei, int is_tmf,
+			     struct mvs_tmf_task *tmf)
+{
+	struct sas_task *task = tei->task;
+	struct mvs_cmd_hdr *hdr = tei->hdr;
+	struct mvs_port *port = tei->port;
+	struct domain_device *dev = task->dev;
+	struct mvs_device *mvi_dev = dev->lldd_dev;
+	struct asd_sas_port *sas_port = dev->port;
+	struct mvs_slot_info *slot;
+	void *buf_prd;
+	struct ssp_frame_hdr *ssp_hdr;
+	void *buf_tmp;
+	u8 *buf_cmd, *buf_oaf, fburst = 0;
+	dma_addr_t buf_tmp_dma;
+	u32 flags;
+	u32 resp_len, req_len, i, tag = tei->tag;
+	const u32 max_resp_len = SB_RFB_MAX;
+	u32 phy_mask;
+
+	slot = &mvi->slot_info[tag];
+
+	phy_mask = ((port->wide_port_phymap) ? port->wide_port_phymap :
+		sas_port->phy_mask) & TXQ_PHY_MASK;
+
+	slot->tx = mvi->tx_prod;
+	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
+				(TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
+				(phy_mask << TXQ_PHY_SHIFT));
+
+	flags = MCH_RETRY;
+	if (task->ssp_task.enable_first_burst) {
+		flags |= MCH_FBURST;
+		fburst = (1 << 7);
+	}
+	if (is_tmf)
+		flags |= (MCH_SSP_FR_TASK << MCH_SSP_FR_TYPE_SHIFT);
+	else
+		flags |= (MCH_SSP_FR_CMD << MCH_SSP_FR_TYPE_SHIFT);
+	hdr->flags = cpu_to_le32(flags | (tei->n_elem << MCH_PRD_LEN_SHIFT));
+	hdr->tags = cpu_to_le32(tag);
+	hdr->data_len = cpu_to_le32(task->total_xfer_len);
+
+	/*
+	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+	 */
+
+	/* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
+	buf_cmd = buf_tmp = slot->buf;
+	buf_tmp_dma = slot->buf_dma;
+
+	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_SSP_CMD_SZ;
+	buf_tmp_dma += MVS_SSP_CMD_SZ;
+#if _MV_DUMP
+	slot->cmd_size = MVS_SSP_CMD_SZ;
+#endif
+
+	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+	buf_oaf = buf_tmp;
+	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_OAF_SZ;
+	buf_tmp_dma += MVS_OAF_SZ;
+
+	/* region 3: PRD table ********************************************* */
+	buf_prd = buf_tmp;
+	if (tei->n_elem)
+		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+	else
+		hdr->prd_tbl = 0;
+
+	i = MVS_CHIP_DISP->prd_size() * tei->n_elem;
+	buf_tmp += i;
+	buf_tmp_dma += i;
+
+	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+	slot->response = buf_tmp;
+	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+	if (mvi->flags & MVF_FLAG_SOC)
+		hdr->reserved[0] = 0;
+
+	resp_len = MVS_SLOT_BUF_SZ - MVS_SSP_CMD_SZ - MVS_OAF_SZ -
+	    sizeof(struct mvs_err_info) - i;
+	resp_len = min(resp_len, max_resp_len);
+
+	req_len = sizeof(struct ssp_frame_hdr) + 28;
+
+	/* request, response lengths */
+	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+
+	/* generate open address frame hdr (first 12 bytes) */
+	/* initiator, SSP, ftype 1h */
+	buf_oaf[0] = (1 << 7) | (PROTOCOL_SSP << 4) | 0x1;
+	buf_oaf[1] = dev->linkrate & 0xf;
+	*(u16 *)(buf_oaf + 2) = cpu_to_be16(mvi_dev->device_id + 1);
+	memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
+
+	/* fill in SSP frame header (Command Table.SSP frame header) */
+	ssp_hdr = (struct ssp_frame_hdr *)buf_cmd;
+
+	if (is_tmf)
+		ssp_hdr->frame_type = SSP_TASK;
+	else
+		ssp_hdr->frame_type = SSP_COMMAND;
+
+	memcpy(ssp_hdr->hashed_dest_addr, dev->hashed_sas_addr,
+	       HASHED_SAS_ADDR_SIZE);
+	memcpy(ssp_hdr->hashed_src_addr,
+	       dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+	ssp_hdr->tag = cpu_to_be16(tag);
+
+	/* fill in IU for TASK and Command Frame */
+	buf_cmd += sizeof(*ssp_hdr);
+	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
+
+	if (ssp_hdr->frame_type != SSP_TASK) {
+		buf_cmd[9] = fburst | task->ssp_task.task_attr |
+				(task->ssp_task.task_prio << 3);
+		memcpy(buf_cmd + 12, &task->ssp_task.cdb, 16);
+	} else{
+		buf_cmd[10] = tmf->tmf;
+		switch (tmf->tmf) {
+		case TMF_ABORT_TASK:
+		case TMF_QUERY_TASK:
+			buf_cmd[12] =
+				(tmf->tag_of_task_to_be_managed >> 8) & 0xff;
+			buf_cmd[13] =
+				tmf->tag_of_task_to_be_managed & 0xff;
+			break;
+		default:
+			break;
+		}
+	}
+	/* fill in PRD (scatter/gather) table, if any */
+	MVS_CHIP_DISP->make_prd(task->scatter, tei->n_elem, buf_prd);
+	return 0;
+}
+
+#define	DEV_IS_GONE(mvi_dev)	((!mvi_dev || (mvi_dev->dev_type == NO_DEVICE)))
+static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
+				struct completion *completion,int is_tmf,
+				struct mvs_tmf_task *tmf)
+{
+	struct domain_device *dev = task->dev;
+	struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+	struct mvs_task_exec_info tei;
+	struct sas_task *t = task;
+	struct mvs_slot_info *slot;
+	u32 tag = 0xdeadbeef, rc, n_elem = 0;
+	u32 n = num, pass = 0;
+	unsigned long flags = 0;
+
+	if (!dev->port) {
+		struct task_status_struct *tsm = &t->task_status;
+
+		tsm->resp = SAS_TASK_UNDELIVERED;
+		tsm->stat = SAS_PHY_DOWN;
+		t->task_done(t);
+		return 0;
+	}
+
+	spin_lock_irqsave(&mvi->lock, flags);
+	do {
+		dev = t->dev;
+		mvi_dev = dev->lldd_dev;
+		if (DEV_IS_GONE(mvi_dev)) {
+			if (mvi_dev)
+				mv_dprintk("device %d not ready.\n",
+					mvi_dev->device_id);
+			else
+				mv_dprintk("device %016llx not ready.\n",
+					SAS_ADDR(dev->sas_addr));
+
+			rc = SAS_PHY_DOWN;
+			goto out_done;
+		}
+
+		if (dev->port->id >= mvi->chip->n_phy)
+			tei.port = &mvi->port[dev->port->id - mvi->chip->n_phy];
+		else
+			tei.port = &mvi->port[dev->port->id];
+
+		if (!tei.port->port_attached) {
+			if (sas_protocol_ata(t->task_proto)) {
+				mv_dprintk("port %d does not"
+					"attached device.\n", dev->port->id);
+				rc = SAS_PHY_DOWN;
+				goto out_done;
+			} else {
+				struct task_status_struct *ts = &t->task_status;
+				ts->resp = SAS_TASK_UNDELIVERED;
+				ts->stat = SAS_PHY_DOWN;
+				t->task_done(t);
+				if (n > 1)
+					t = list_entry(t->list.next,
+							struct sas_task, list);
+				continue;
+			}
+		}
+
+		if (!sas_protocol_ata(t->task_proto)) {
+			if (t->num_scatter) {
+				n_elem = dma_map_sg(mvi->dev,
+						    t->scatter,
+						    t->num_scatter,
+						    t->data_dir);
+				if (!n_elem) {
+					rc = -ENOMEM;
+					goto err_out;
+				}
+			}
+		} else {
+			n_elem = t->num_scatter;
+		}
+
+		rc = mvs_tag_alloc(mvi, &tag);
+		if (rc)
+			goto err_out;
+
+		slot = &mvi->slot_info[tag];
+
+
+		t->lldd_task = NULL;
+		slot->n_elem = n_elem;
+		slot->slot_tag = tag;
+		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+
+		tei.task = t;
+		tei.hdr = &mvi->slot[tag];
+		tei.tag = tag;
+		tei.n_elem = n_elem;
+		switch (t->task_proto) {
+		case SAS_PROTOCOL_SMP:
+			rc = mvs_task_prep_smp(mvi, &tei);
+			break;
+		case SAS_PROTOCOL_SSP:
+			rc = mvs_task_prep_ssp(mvi, &tei, is_tmf, tmf);
+			break;
+		case SAS_PROTOCOL_SATA:
+		case SAS_PROTOCOL_STP:
+		case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+			rc = mvs_task_prep_ata(mvi, &tei);
+			break;
+		default:
+			dev_printk(KERN_ERR, mvi->dev,
+				"unknown sas_task proto: 0x%x\n",
+				t->task_proto);
+			rc = -EINVAL;
+			break;
+		}
+
+		if (rc) {
+			mv_dprintk("rc is %x\n", rc);
+			goto err_out_tag;
+		}
+		slot->task = t;
+		slot->port = tei.port;
+		t->lldd_task = slot;
+		list_add_tail(&slot->entry, &tei.port->list);
+		/* TODO: select normal or high priority */
+		spin_lock(&t->task_state_lock);
+		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
+		spin_unlock(&t->task_state_lock);
+
+		mvs_hba_memory_dump(mvi, tag, t->task_proto);
+		mvi_dev->runing_req++;
+		++pass;
+		mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
+		if (n > 1)
+			t = list_entry(t->list.next, struct sas_task, list);
+	} while (--n);
+	rc = 0;
+	goto out_done;
+
+err_out_tag:
+	mvs_tag_free(mvi, tag);
+err_out:
+
+	dev_printk(KERN_ERR, mvi->dev, "mvsas exec failed[%d]!\n", rc);
+	if (!sas_protocol_ata(t->task_proto))
+		if (n_elem)
+			dma_unmap_sg(mvi->dev, t->scatter, n_elem,
+				     t->data_dir);
+out_done:
+	if (likely(pass)) {
+		MVS_CHIP_DISP->start_delivery(mvi,
+			(mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
+	}
+	spin_unlock_irqrestore(&mvi->lock, flags);
+	return rc;
+}
+
+int mvs_queue_command(struct sas_task *task, const int num,
+			gfp_t gfp_flags)
+{
+	return mvs_task_exec(task, num, gfp_flags, NULL, 0, NULL);
+}
+
+static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
+{
+	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+	mvs_tag_clear(mvi, slot_idx);
+}
+
+static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
+			  struct mvs_slot_info *slot, u32 slot_idx)
+{
+	if (!slot->task)
+		return;
+	if (!sas_protocol_ata(task->task_proto))
+		if (slot->n_elem)
+			dma_unmap_sg(mvi->dev, task->scatter,
+				     slot->n_elem, task->data_dir);
+
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SMP:
+		dma_unmap_sg(mvi->dev, &task->smp_task.smp_resp, 1,
+			     PCI_DMA_FROMDEVICE);
+		dma_unmap_sg(mvi->dev, &task->smp_task.smp_req, 1,
+			     PCI_DMA_TODEVICE);
+		break;
+
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SSP:
+	default:
+		/* do nothing */
+		break;
+	}
+	list_del_init(&slot->entry);
+	task->lldd_task = NULL;
+	slot->task = NULL;
+	slot->port = NULL;
+	slot->slot_tag = 0xFFFFFFFF;
+	mvs_slot_free(mvi, slot_idx);
+}
+
+static void mvs_update_wideport(struct mvs_info *mvi, int i)
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct mvs_port *port = phy->port;
+	int j, no;
+
+	for_each_phy(port->wide_port_phymap, j, no) {
+		if (j & 1) {
+			MVS_CHIP_DISP->write_port_cfg_addr(mvi, no,
+						PHYR_WIDE_PORT);
+			MVS_CHIP_DISP->write_port_cfg_data(mvi, no,
+						port->wide_port_phymap);
+		} else {
+			MVS_CHIP_DISP->write_port_cfg_addr(mvi, no,
+						PHYR_WIDE_PORT);
+			MVS_CHIP_DISP->write_port_cfg_data(mvi, no,
+						0);
+		}
+	}
+}
+
+static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i)
+{
+	u32 tmp;
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct mvs_port *port = phy->port;
+
+	tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, i);
+	if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
+		if (!port)
+			phy->phy_attached = 1;
+		return tmp;
+	}
+
+	if (port) {
+		if (phy->phy_type & PORT_TYPE_SAS) {
+			port->wide_port_phymap &= ~(1U << i);
+			if (!port->wide_port_phymap)
+				port->port_attached = 0;
+			mvs_update_wideport(mvi, i);
+		} else if (phy->phy_type & PORT_TYPE_SATA)
+			port->port_attached = 0;
+		phy->port = NULL;
+		phy->phy_attached = 0;
+		phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+	}
+	return 0;
+}
+
+static void *mvs_get_d2h_reg(struct mvs_info *mvi, int i, void *buf)
+{
+	u32 *s = (u32 *) buf;
+
+	if (!s)
+		return NULL;
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG3);
+	s[3] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG2);
+	s[2] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG1);
+	s[1] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG0);
+	s[0] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+	/* Workaround: take some ATAPI devices for ATA */
+	if (((s[1] & 0x00FFFFFF) == 0x00EB1401) && (*(u8 *)&s[3] == 0x01))
+		s[1] = 0x00EB1401 | (*((u8 *)&s[1] + 3) & 0x10);
+
+	return s;
+}
+
+static u32 mvs_is_sig_fis_received(u32 irq_status)
+{
+	return irq_status & PHYEV_SIG_FIS;
+}
+
+void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st)
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct sas_identify_frame *id;
+
+	id = (struct sas_identify_frame *)phy->frame_rcvd;
+
+	if (get_st) {
+		phy->irq_status = MVS_CHIP_DISP->read_port_irq_stat(mvi, i);
+		phy->phy_status = mvs_is_phy_ready(mvi, i);
+	}
+
+	if (phy->phy_status) {
+		int oob_done = 0;
+		struct asd_sas_phy *sas_phy = &mvi->phy[i].sas_phy;
+
+		oob_done = MVS_CHIP_DISP->oob_done(mvi, i);
+
+		MVS_CHIP_DISP->fix_phy_info(mvi, i, id);
+		if (phy->phy_type & PORT_TYPE_SATA) {
+			phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
+			if (mvs_is_sig_fis_received(phy->irq_status)) {
+				phy->phy_attached = 1;
+				phy->att_dev_sas_addr =
+					i + mvi->id * mvi->chip->n_phy;
+				if (oob_done)
+					sas_phy->oob_mode = SATA_OOB_MODE;
+				phy->frame_rcvd_size =
+				    sizeof(struct dev_to_host_fis);
+				mvs_get_d2h_reg(mvi, i, id);
+			} else {
+				u32 tmp;
+				dev_printk(KERN_DEBUG, mvi->dev,
+					"Phy%d : No sig fis\n", i);
+				tmp = MVS_CHIP_DISP->read_port_irq_mask(mvi, i);
+				MVS_CHIP_DISP->write_port_irq_mask(mvi, i,
+						tmp | PHYEV_SIG_FIS);
+				phy->phy_attached = 0;
+				phy->phy_type &= ~PORT_TYPE_SATA;
+				MVS_CHIP_DISP->phy_reset(mvi, i, 0);
+				goto out_done;
+			}
+		}		else if (phy->phy_type & PORT_TYPE_SAS
+			|| phy->att_dev_info & PORT_SSP_INIT_MASK) {
+			phy->phy_attached = 1;
+			phy->identify.device_type =
+				phy->att_dev_info & PORT_DEV_TYPE_MASK;
+
+			if (phy->identify.device_type == SAS_END_DEV)
+				phy->identify.target_port_protocols =
+							SAS_PROTOCOL_SSP;
+			else if (phy->identify.device_type != NO_DEVICE)
+				phy->identify.target_port_protocols =
+							SAS_PROTOCOL_SMP;
+			if (oob_done)
+				sas_phy->oob_mode = SAS_OOB_MODE;
+			phy->frame_rcvd_size =
+			    sizeof(struct sas_identify_frame);
+		}
+		memcpy(sas_phy->attached_sas_addr,
+			&phy->att_dev_sas_addr, SAS_ADDR_SIZE);
+
+		if (MVS_CHIP_DISP->phy_work_around)
+			MVS_CHIP_DISP->phy_work_around(mvi, i);
+	}
+	mv_dprintk("port %d attach dev info is %x\n",
+		i + mvi->id * mvi->chip->n_phy, phy->att_dev_info);
+	mv_dprintk("port %d attach sas addr is %llx\n",
+		i + mvi->id * mvi->chip->n_phy, phy->att_dev_sas_addr);
+out_done:
+	if (get_st)
+		MVS_CHIP_DISP->write_port_irq_stat(mvi, i, phy->irq_status);
+}
+
+static void mvs_port_notify_formed(struct asd_sas_phy *sas_phy, int lock)
+{
+	struct sas_ha_struct *sas_ha = sas_phy->ha;
+	struct mvs_info *mvi = NULL; int i = 0, hi;
+	struct mvs_phy *phy = sas_phy->lldd_phy;
+	struct asd_sas_port *sas_port = sas_phy->port;
+	struct mvs_port *port;
+	unsigned long flags = 0;
+	if (!sas_port)
+		return;
+
+	while (sas_ha->sas_phy[i]) {
+		if (sas_ha->sas_phy[i] == sas_phy)
+			break;
+		i++;
+	}
+	hi = i/((struct mvs_prv_info *)sas_ha->lldd_ha)->n_phy;
+	mvi = ((struct mvs_prv_info *)sas_ha->lldd_ha)->mvi[hi];
+	if (sas_port->id >= mvi->chip->n_phy)
+		port = &mvi->port[sas_port->id - mvi->chip->n_phy];
+	else
+		port = &mvi->port[sas_port->id];
+	if (lock)
+		spin_lock_irqsave(&mvi->lock, flags);
+	port->port_attached = 1;
+	phy->port = port;
+	if (phy->phy_type & PORT_TYPE_SAS) {
+		port->wide_port_phymap = sas_port->phy_mask;
+		mv_printk("set wide port phy map %x\n", sas_port->phy_mask);
+		mvs_update_wideport(mvi, sas_phy->id);
+	}
+	if (lock)
+		spin_unlock_irqrestore(&mvi->lock, flags);
+}
+
+static void mvs_port_notify_deformed(struct asd_sas_phy *sas_phy, int lock)
+{
+	/*Nothing*/
+}
+
+
+void mvs_port_formed(struct asd_sas_phy *sas_phy)
+{
+	mvs_port_notify_formed(sas_phy, 1);
+}
+
+void mvs_port_deformed(struct asd_sas_phy *sas_phy)
+{
+	mvs_port_notify_deformed(sas_phy, 1);
+}
+
+struct mvs_device *mvs_alloc_dev(struct mvs_info *mvi)
+{
+	u32 dev;
+	for (dev = 0; dev < MVS_MAX_DEVICES; dev++) {
+		if (mvi->devices[dev].dev_type == NO_DEVICE) {
+			mvi->devices[dev].device_id = dev;
+			return &mvi->devices[dev];
+		}
+	}
+
+	if (dev == MVS_MAX_DEVICES)
+		mv_printk("max support %d devices, ignore ..\n",
+			MVS_MAX_DEVICES);
+
+	return NULL;
+}
+
+void mvs_free_dev(struct mvs_device *mvi_dev)
+{
+	u32 id = mvi_dev->device_id;
+	memset(mvi_dev, 0, sizeof(*mvi_dev));
+	mvi_dev->device_id = id;
+	mvi_dev->dev_type = NO_DEVICE;
+	mvi_dev->dev_status = MVS_DEV_NORMAL;
+	mvi_dev->taskfileset = MVS_ID_NOT_MAPPED;
+}
+
+int mvs_dev_found_notify(struct domain_device *dev, int lock)
+{
+	unsigned long flags = 0;
+	int res = 0;
+	struct mvs_info *mvi = NULL;
+	struct domain_device *parent_dev = dev->parent;
+	struct mvs_device *mvi_device;
+
+	mvi = mvs_find_dev_mvi(dev);
+
+	if (lock)
+		spin_lock_irqsave(&mvi->lock, flags);
+
+	mvi_device = mvs_alloc_dev(mvi);
+	if (!mvi_device) {
+		res = -1;
+		goto found_out;
+	}
+	dev->lldd_dev = mvi_device;
+	mvi_device->dev_type = dev->dev_type;
+	mvi_device->mvi_info = mvi;
+	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
+		int phy_id;
+		u8 phy_num = parent_dev->ex_dev.num_phys;
+		struct ex_phy *phy;
+		for (phy_id = 0; phy_id < phy_num; phy_id++) {
+			phy = &parent_dev->ex_dev.ex_phy[phy_id];
+			if (SAS_ADDR(phy->attached_sas_addr) ==
+				SAS_ADDR(dev->sas_addr)) {
+				mvi_device->attached_phy = phy_id;
+				break;
+			}
+		}
+
+		if (phy_id == phy_num) {
+			mv_printk("Error: no attached dev:%016llx"
+				"at ex:%016llx.\n",
+				SAS_ADDR(dev->sas_addr),
+				SAS_ADDR(parent_dev->sas_addr));
+			res = -1;
+		}
+	}
+
+found_out:
+	if (lock)
+		spin_unlock_irqrestore(&mvi->lock, flags);
+	return res;
+}
+
+int mvs_dev_found(struct domain_device *dev)
+{
+	return mvs_dev_found_notify(dev, 1);
+}
+
+void mvs_dev_gone_notify(struct domain_device *dev, int lock)
+{
+	unsigned long flags = 0;
+	struct mvs_device *mvi_dev = dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+
+	if (lock)
+		spin_lock_irqsave(&mvi->lock, flags);
+
+	if (mvi_dev) {
+		mv_dprintk("found dev[%d:%x] is gone.\n",
+			mvi_dev->device_id, mvi_dev->dev_type);
+		mvs_free_reg_set(mvi, mvi_dev);
+		mvs_free_dev(mvi_dev);
+	} else {
+		mv_dprintk("found dev has gone.\n");
+	}
+	dev->lldd_dev = NULL;
+
+	if (lock)
+		spin_unlock_irqrestore(&mvi->lock, flags);
+}
+
+
+void mvs_dev_gone(struct domain_device *dev)
+{
+	mvs_dev_gone_notify(dev, 1);
+}
+
+static  struct sas_task *mvs_alloc_task(void)
+{
+	struct sas_task *task = kzalloc(sizeof(struct sas_task), GFP_KERNEL);
+
+	if (task) {
+		INIT_LIST_HEAD(&task->list);
+		spin_lock_init(&task->task_state_lock);
+		task->task_state_flags = SAS_TASK_STATE_PENDING;
+		init_timer(&task->timer);
+		init_completion(&task->completion);
+	}
+	return task;
+}
+
+static  void mvs_free_task(struct sas_task *task)
+{
+	if (task) {
+		BUG_ON(!list_empty(&task->list));
+		kfree(task);
+	}
+}
+
+static void mvs_task_done(struct sas_task *task)
+{
+	if (!del_timer(&task->timer))
+		return;
+	complete(&task->completion);
+}
+
+static void mvs_tmf_timedout(unsigned long data)
+{
+	struct sas_task *task = (struct sas_task *)data;
+
+	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+	complete(&task->completion);
+}
+
+/* XXX */
+#define MVS_TASK_TIMEOUT 20
+static int mvs_exec_internal_tmf_task(struct domain_device *dev,
+			void *parameter, u32 para_len, struct mvs_tmf_task *tmf)
+{
+	int res, retry;
+	struct sas_task *task = NULL;
+
+	for (retry = 0; retry < 3; retry++) {
+		task = mvs_alloc_task();
+		if (!task)
+			return -ENOMEM;
+
+		task->dev = dev;
+		task->task_proto = dev->tproto;
+
+		memcpy(&task->ssp_task, parameter, para_len);
+		task->task_done = mvs_task_done;
+
+		task->timer.data = (unsigned long) task;
+		task->timer.function = mvs_tmf_timedout;
+		task->timer.expires = jiffies + MVS_TASK_TIMEOUT*HZ;
+		add_timer(&task->timer);
+
+		res = mvs_task_exec(task, 1, GFP_KERNEL, NULL, 1, tmf);
+
+		if (res) {
+			del_timer(&task->timer);
+			mv_printk("executing internel task failed:%d\n", res);
+			goto ex_err;
+		}
+
+		wait_for_completion(&task->completion);
+		res = -TMF_RESP_FUNC_FAILED;
+		/* Even TMF timed out, return direct. */
+		if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+				mv_printk("TMF task[%x] timeout.\n", tmf->tmf);
+				goto ex_err;
+			}
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+		    task->task_status.stat == SAM_GOOD) {
+			res = TMF_RESP_FUNC_COMPLETE;
+			break;
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+		      task->task_status.stat == SAS_DATA_UNDERRUN) {
+			/* no error, but return the number of bytes of
+			 * underrun */
+			res = task->task_status.residual;
+			break;
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+		      task->task_status.stat == SAS_DATA_OVERRUN) {
+			mv_dprintk("blocked task error.\n");
+			res = -EMSGSIZE;
+			break;
+		} else {
+			mv_dprintk(" task to dev %016llx response: 0x%x "
+				    "status 0x%x\n",
+				    SAS_ADDR(dev->sas_addr),
+				    task->task_status.resp,
+				    task->task_status.stat);
+			mvs_free_task(task);
+			task = NULL;
+
+		}
+	}
+ex_err:
+	BUG_ON(retry == 3 && task != NULL);
+	if (task != NULL)
+		mvs_free_task(task);
+	return res;
+}
+
+static int mvs_debug_issue_ssp_tmf(struct domain_device *dev,
+				u8 *lun, struct mvs_tmf_task *tmf)
+{
+	struct sas_ssp_task ssp_task;
+	DECLARE_COMPLETION_ONSTACK(completion);
+	if (!(dev->tproto & SAS_PROTOCOL_SSP))
+		return TMF_RESP_FUNC_ESUPP;
+
+	strncpy((u8 *)&ssp_task.LUN, lun, 8);
+
+	return mvs_exec_internal_tmf_task(dev, &ssp_task,
+				sizeof(ssp_task), tmf);
+}
+
+
+/*  Standard mandates link reset for ATA  (type 0)
+    and hard reset for SSP (type 1) , only for RECOVERY */
+static int mvs_debug_I_T_nexus_reset(struct domain_device *dev)
+{
+	int rc;
+	struct sas_phy *phy = sas_find_local_phy(dev);
+	int reset_type = (dev->dev_type == SATA_DEV ||
+			(dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
+	rc = sas_phy_reset(phy, reset_type);
+	msleep(2000);
+	return rc;
+}
+
+/* mandatory SAM-3 */
+int mvs_lu_reset(struct domain_device *dev, u8 *lun)
+{
+	unsigned long flags;
+	int i, phyno[WIDE_PORT_MAX_PHY], num , rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_tmf_task tmf_task;
+	struct mvs_device * mvi_dev = dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+
+	tmf_task.tmf = TMF_LU_RESET;
+	mvi_dev->dev_status = MVS_DEV_EH;
+	rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+	if (rc == TMF_RESP_FUNC_COMPLETE) {
+		num = mvs_find_dev_phyno(dev, phyno);
+		spin_lock_irqsave(&mvi->lock, flags);
+		for (i = 0; i < num; i++)
+			mvs_release_task(mvi, phyno[i], dev);
+		spin_unlock_irqrestore(&mvi->lock, flags);
+	}
+	/* If failed, fall-through I_T_Nexus reset */
+	mv_printk("%s for device[%x]:rc= %d\n", __func__,
+			mvi_dev->device_id, rc);
+	return rc;
+}
+
+int mvs_I_T_nexus_reset(struct domain_device *dev)
+{
+	unsigned long flags;
+	int i, phyno[WIDE_PORT_MAX_PHY], num , rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_device * mvi_dev = (struct mvs_device *)dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+
+	if (mvi_dev->dev_status != MVS_DEV_EH)
+		return TMF_RESP_FUNC_COMPLETE;
+	rc = mvs_debug_I_T_nexus_reset(dev);
+	mv_printk("%s for device[%x]:rc= %d\n",
+		__func__, mvi_dev->device_id, rc);
+
+	/* housekeeper */
+	num = mvs_find_dev_phyno(dev, phyno);
+	spin_lock_irqsave(&mvi->lock, flags);
+	for (i = 0; i < num; i++)
+		mvs_release_task(mvi, phyno[i], dev);
+	spin_unlock_irqrestore(&mvi->lock, flags);
+
+	return rc;
+}
+/* optional SAM-3 */
+int mvs_query_task(struct sas_task *task)
+{
+	u32 tag;
+	struct scsi_lun lun;
+	struct mvs_tmf_task tmf_task;
+	int rc = TMF_RESP_FUNC_FAILED;
+
+	if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+		struct scsi_cmnd * cmnd = (struct scsi_cmnd *)task->uldd_task;
+		struct domain_device *dev = task->dev;
+		struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+		struct mvs_info *mvi = mvi_dev->mvi_info;
+
+		int_to_scsilun(cmnd->device->lun, &lun);
+		rc = mvs_find_tag(mvi, task, &tag);
+		if (rc == 0) {
+			rc = TMF_RESP_FUNC_FAILED;
+			return rc;
+		}
+
+		tmf_task.tmf = TMF_QUERY_TASK;
+		tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+		rc = mvs_debug_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+		switch (rc) {
+		/* The task is still in Lun, release it then */
+		case TMF_RESP_FUNC_SUCC:
+		/* The task is not in Lun or failed, reset the phy */
+		case TMF_RESP_FUNC_FAILED:
+		case TMF_RESP_FUNC_COMPLETE:
+			break;
+		}
+	}
+	mv_printk("%s:rc= %d\n", __func__, rc);
+	return rc;
+}
+
+/*  mandatory SAM-3, still need free task/slot info */
+int mvs_abort_task(struct sas_task *task)
+{
+	struct scsi_lun lun;
+	struct mvs_tmf_task tmf_task;
+	struct domain_device *dev = task->dev;
+	struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+	int rc = TMF_RESP_FUNC_FAILED;
+	unsigned long flags;
+	u32 tag;
+
+	if (mvi->exp_req)
+		mvi->exp_req--;
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+		rc = TMF_RESP_FUNC_COMPLETE;
+		goto out;
+	}
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+	if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+		struct scsi_cmnd * cmnd = (struct scsi_cmnd *)task->uldd_task;
+
+		int_to_scsilun(cmnd->device->lun, &lun);
+		rc = mvs_find_tag(mvi, task, &tag);
+		if (rc == 0) {
+			mv_printk("No such tag in %s\n", __func__);
+			rc = TMF_RESP_FUNC_FAILED;
+			return rc;
+		}
+
+		tmf_task.tmf = TMF_ABORT_TASK;
+		tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+		rc = mvs_debug_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+
+		/* if successful, clear the task and callback forwards.*/
+		if (rc == TMF_RESP_FUNC_COMPLETE) {
+			u32 slot_no;
+			struct mvs_slot_info *slot;
+
+			if (task->lldd_task) {
+				slot = task->lldd_task;
+				slot_no = (u32) (slot - mvi->slot_info);
+				mvs_slot_complete(mvi, slot_no, 1);
+			}
+		}
+	} else if (task->task_proto & SAS_PROTOCOL_SATA ||
+		task->task_proto & SAS_PROTOCOL_STP) {
+		/* to do free register_set */
+	} else {
+		/* SMP */
+
+	}
+out:
+	if (rc != TMF_RESP_FUNC_COMPLETE)
+		mv_printk("%s:rc= %d\n", __func__, rc);
+	return rc;
+}
+
+int mvs_abort_task_set(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_tmf_task tmf_task;
+
+	tmf_task.tmf = TMF_ABORT_TASK_SET;
+	rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+
+	return rc;
+}
+
+int mvs_clear_aca(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_tmf_task tmf_task;
+
+	tmf_task.tmf = TMF_CLEAR_ACA;
+	rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+
+	return rc;
+}
+
+int mvs_clear_task_set(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_tmf_task tmf_task;
+
+	tmf_task.tmf = TMF_CLEAR_TASK_SET;
+	rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+
+	return rc;
+}
+
+static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
+			u32 slot_idx, int err)
+{
+	struct mvs_device *mvi_dev = task->dev->lldd_dev;
+	struct task_status_struct *tstat = &task->task_status;
+	struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
+	int stat = SAM_GOOD;
+
+
+	resp->frame_len = sizeof(struct dev_to_host_fis);
+	memcpy(&resp->ending_fis[0],
+	       SATA_RECEIVED_D2H_FIS(mvi_dev->taskfileset),
+	       sizeof(struct dev_to_host_fis));
+	tstat->buf_valid_size = sizeof(*resp);
+	if (unlikely(err))
+		stat = SAS_PROTO_RESPONSE;
+	return stat;
+}
+
+static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
+			 u32 slot_idx)
+{
+	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
+	int stat;
+	u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
+	u32 tfs = 0;
+	enum mvs_port_type type = PORT_TYPE_SAS;
+
+	if (err_dw0 & CMD_ISS_STPD)
+		MVS_CHIP_DISP->issue_stop(mvi, type, tfs);
+
+	MVS_CHIP_DISP->command_active(mvi, slot_idx);
+
+	stat = SAM_CHECK_COND;
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SSP:
+		stat = SAS_ABORTED_TASK;
+		break;
+	case SAS_PROTOCOL_SMP:
+		stat = SAM_CHECK_COND;
+		break;
+
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+	{
+		if (err_dw0 == 0x80400002)
+			mv_printk("find reserved error, why?\n");
+
+		task->ata_task.use_ncq = 0;
+		stat = SAS_PROTO_RESPONSE;
+		mvs_sata_done(mvi, task, slot_idx, 1);
+
+	}
+		break;
+	default:
+		break;
+	}
+
+	return stat;
+}
+
+int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
+{
+	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
+	struct sas_task *task = slot->task;
+	struct mvs_device *mvi_dev = NULL;
+	struct task_status_struct *tstat;
+
+	bool aborted;
+	void *to;
+	enum exec_status sts;
+
+	if (mvi->exp_req)
+		mvi->exp_req--;
+	if (unlikely(!task || !task->lldd_task))
+		return -1;
+
+	tstat = &task->task_status;
+	mvi_dev = task->dev->lldd_dev;
+
+	mvs_hba_cq_dump(mvi);
+
+	spin_lock(&task->task_state_lock);
+	task->task_state_flags &=
+		~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
+	task->task_state_flags |= SAS_TASK_STATE_DONE;
+	/* race condition*/
+	aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
+	spin_unlock(&task->task_state_lock);
+
+	memset(tstat, 0, sizeof(*tstat));
+	tstat->resp = SAS_TASK_COMPLETE;
+
+	if (unlikely(aborted)) {
+		tstat->stat = SAS_ABORTED_TASK;
+		if (mvi_dev)
+			mvi_dev->runing_req--;
+		if (sas_protocol_ata(task->task_proto))
+			mvs_free_reg_set(mvi, mvi_dev);
+
+		mvs_slot_task_free(mvi, task, slot, slot_idx);
+		return -1;
+	}
+
+	if (unlikely(!mvi_dev || !slot->port->port_attached || flags)) {
+		mv_dprintk("port has not device.\n");
+		tstat->stat = SAS_PHY_DOWN;
+		goto out;
+	}
+
+	/*
+	if (unlikely((rx_desc & RXQ_ERR) || (*(u64 *) slot->response))) {
+		 mv_dprintk("Find device[%016llx] RXQ_ERR %X,
+		 err info:%016llx\n",
+		 SAS_ADDR(task->dev->sas_addr),
+		 rx_desc, (u64)(*(u64 *) slot->response));
+	}
+	*/
+
+	/* error info record present */
+	if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
+		tstat->stat = mvs_slot_err(mvi, task, slot_idx);
+		goto out;
+	}
+
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SSP:
+		/* hw says status == 0, datapres == 0 */
+		if (rx_desc & RXQ_GOOD) {
+			tstat->stat = SAM_GOOD;
+			tstat->resp = SAS_TASK_COMPLETE;
+		}
+		/* response frame present */
+		else if (rx_desc & RXQ_RSP) {
+			struct ssp_response_iu *iu = slot->response +
+						sizeof(struct mvs_err_info);
+			sas_ssp_task_response(mvi->dev, task, iu);
+		} else
+			tstat->stat = SAM_CHECK_COND;
+		break;
+
+	case SAS_PROTOCOL_SMP: {
+			struct scatterlist *sg_resp = &task->smp_task.smp_resp;
+			tstat->stat = SAM_GOOD;
+			to = kmap_atomic(sg_page(sg_resp), KM_IRQ0);
+			memcpy(to + sg_resp->offset,
+				slot->response + sizeof(struct mvs_err_info),
+				sg_dma_len(sg_resp));
+			kunmap_atomic(to, KM_IRQ0);
+			break;
+		}
+
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
+			tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
+			break;
+		}
+
+	default:
+		tstat->stat = SAM_CHECK_COND;
+		break;
+	}
+
+out:
+	if (mvi_dev) {
+		mvi_dev->runing_req--;
+		if (sas_protocol_ata(task->task_proto))
+			mvs_free_reg_set(mvi, mvi_dev);
+	}
+	mvs_slot_task_free(mvi, task, slot, slot_idx);
+	sts = tstat->stat;
+
+	spin_unlock(&mvi->lock);
+	if (task->task_done)
+		task->task_done(task);
+	else
+		mv_dprintk("why has not task_done.\n");
+	spin_lock(&mvi->lock);
+
+	return sts;
+}
+
+void mvs_release_task(struct mvs_info *mvi,
+		int phy_no, struct domain_device *dev)
+{
+	int i = 0; u32 slot_idx;
+	struct mvs_phy *phy;
+	struct mvs_port *port;
+	struct mvs_slot_info *slot, *slot2;
+
+	phy = &mvi->phy[phy_no];
+	port = phy->port;
+	if (!port)
+		return;
+
+	list_for_each_entry_safe(slot, slot2, &port->list, entry) {
+		struct sas_task *task;
+		slot_idx = (u32) (slot - mvi->slot_info);
+		task = slot->task;
+
+		if (dev && task->dev != dev)
+			continue;
+
+		mv_printk("Release slot [%x] tag[%x], task [%p]:\n",
+			slot_idx, slot->slot_tag, task);
+
+		if (task->task_proto & SAS_PROTOCOL_SSP) {
+			mv_printk("attached with SSP task CDB[");
+			for (i = 0; i < 16; i++)
+				mv_printk(" %02x", task->ssp_task.cdb[i]);
+			mv_printk(" ]\n");
+		}
+
+		mvs_slot_complete(mvi, slot_idx, 1);
+	}
+}
+
+static void mvs_phy_disconnected(struct mvs_phy *phy)
+{
+	phy->phy_attached = 0;
+	phy->att_dev_info = 0;
+	phy->att_dev_sas_addr = 0;
+}
+
+static void mvs_work_queue(struct work_struct *work)
+{
+	struct delayed_work *dw = container_of(work, struct delayed_work, work);
+	struct mvs_wq *mwq = container_of(dw, struct mvs_wq, work_q);
+	struct mvs_info *mvi = mwq->mvi;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mvi->lock, flags);
+	if (mwq->handler & PHY_PLUG_EVENT) {
+		u32 phy_no = (unsigned long) mwq->data;
+		struct sas_ha_struct *sas_ha = mvi->sas;
+		struct mvs_phy *phy = &mvi->phy[phy_no];
+		struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+		if (phy->phy_event & PHY_PLUG_OUT) {
+			u32 tmp;
+			struct sas_identify_frame *id;
+			id = (struct sas_identify_frame *)phy->frame_rcvd;
+			tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, phy_no);
+			phy->phy_event &= ~PHY_PLUG_OUT;
+			if (!(tmp & PHY_READY_MASK)) {
+				sas_phy_disconnected(sas_phy);
+				mvs_phy_disconnected(phy);
+				sas_ha->notify_phy_event(sas_phy,
+					PHYE_LOSS_OF_SIGNAL);
+				mv_dprintk("phy%d Removed Device\n", phy_no);
+			} else {
+				MVS_CHIP_DISP->detect_porttype(mvi, phy_no);
+				mvs_update_phyinfo(mvi, phy_no, 1);
+				mvs_bytes_dmaed(mvi, phy_no);
+				mvs_port_notify_formed(sas_phy, 0);
+				mv_dprintk("phy%d Attached Device\n", phy_no);
+			}
+		}
+	}
+	list_del(&mwq->entry);
+	spin_unlock_irqrestore(&mvi->lock, flags);
+	kfree(mwq);
+}
+
+static int mvs_handle_event(struct mvs_info *mvi, void *data, int handler)
+{
+	struct mvs_wq *mwq;
+	int ret = 0;
+
+	mwq = kmalloc(sizeof(struct mvs_wq), GFP_ATOMIC);
+	if (mwq) {
+		mwq->mvi = mvi;
+		mwq->data = data;
+		mwq->handler = handler;
+		MV_INIT_DELAYED_WORK(&mwq->work_q, mvs_work_queue, mwq);
+		list_add_tail(&mwq->entry, &mvi->wq_list);
+		schedule_delayed_work(&mwq->work_q, HZ * 2);
+	} else
+		ret = -ENOMEM;
+
+	return ret;
+}
+
+static void mvs_sig_time_out(unsigned long tphy)
+{
+	struct mvs_phy *phy = (struct mvs_phy *)tphy;
+	struct mvs_info *mvi = phy->mvi;
+	u8 phy_no;
+
+	for (phy_no = 0; phy_no < mvi->chip->n_phy; phy_no++) {
+		if (&mvi->phy[phy_no] == phy) {
+			mv_dprintk("Get signature time out, reset phy %d\n",
+				phy_no+mvi->id*mvi->chip->n_phy);
+			MVS_CHIP_DISP->phy_reset(mvi, phy_no, 1);
+		}
+	}
+}
+
+static void mvs_sig_remove_timer(struct mvs_phy *phy)
+{
+	if (phy->timer.function)
+		del_timer(&phy->timer);
+	phy->timer.function = NULL;
+}
+
+void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
+{
+	u32 tmp;
+	struct sas_ha_struct *sas_ha = mvi->sas;
+	struct mvs_phy *phy = &mvi->phy[phy_no];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+	phy->irq_status = MVS_CHIP_DISP->read_port_irq_stat(mvi, phy_no);
+	mv_dprintk("port %d ctrl sts=0x%X.\n", phy_no+mvi->id*mvi->chip->n_phy,
+		MVS_CHIP_DISP->read_phy_ctl(mvi, phy_no));
+	mv_dprintk("Port %d irq sts = 0x%X\n", phy_no+mvi->id*mvi->chip->n_phy,
+		phy->irq_status);
+
+	/*
+	* events is port event now ,
+	* we need check the interrupt status which belongs to per port.
+	*/
+
+	if (phy->irq_status & PHYEV_DCDR_ERR)
+		mv_dprintk("port %d STP decoding error.\n",
+		phy_no+mvi->id*mvi->chip->n_phy);
+
+	if (phy->irq_status & PHYEV_POOF) {
+		if (!(phy->phy_event & PHY_PLUG_OUT)) {
+			int dev_sata = phy->phy_type & PORT_TYPE_SATA;
+			int ready;
+			mvs_release_task(mvi, phy_no, NULL);
+			phy->phy_event |= PHY_PLUG_OUT;
+			mvs_handle_event(mvi,
+				(void *)(unsigned long)phy_no,
+				PHY_PLUG_EVENT);
+			ready = mvs_is_phy_ready(mvi, phy_no);
+			if (!ready)
+				mv_dprintk("phy%d Unplug Notice\n",
+					phy_no +
+					mvi->id * mvi->chip->n_phy);
+			if (ready || dev_sata) {
+				if (MVS_CHIP_DISP->stp_reset)
+					MVS_CHIP_DISP->stp_reset(mvi,
+							phy_no);
+				else
+					MVS_CHIP_DISP->phy_reset(mvi,
+							phy_no, 0);
+				return;
+			}
+		}
+	}
+
+	if (phy->irq_status & PHYEV_COMWAKE) {
+		tmp = MVS_CHIP_DISP->read_port_irq_mask(mvi, phy_no);
+		MVS_CHIP_DISP->write_port_irq_mask(mvi, phy_no,
+					tmp | PHYEV_SIG_FIS);
+		if (phy->timer.function == NULL) {
+			phy->timer.data = (unsigned long)phy;
+			phy->timer.function = mvs_sig_time_out;
+			phy->timer.expires = jiffies + 10*HZ;
+			add_timer(&phy->timer);
+		}
+	}
+	if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
+		phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
+		mvs_sig_remove_timer(phy);
+		mv_dprintk("notify plug in on phy[%d]\n", phy_no);
+		if (phy->phy_status) {
+			mdelay(10);
+			MVS_CHIP_DISP->detect_porttype(mvi, phy_no);
+			if (phy->phy_type & PORT_TYPE_SATA) {
+				tmp = MVS_CHIP_DISP->read_port_irq_mask(
+						mvi, phy_no);
+				tmp &= ~PHYEV_SIG_FIS;
+				MVS_CHIP_DISP->write_port_irq_mask(mvi,
+							phy_no, tmp);
+			}
+			mvs_update_phyinfo(mvi, phy_no, 0);
+			mvs_bytes_dmaed(mvi, phy_no);
+			/* whether driver is going to handle hot plug */
+			if (phy->phy_event & PHY_PLUG_OUT) {
+				mvs_port_notify_formed(sas_phy, 0);
+				phy->phy_event &= ~PHY_PLUG_OUT;
+			}
+		} else {
+			mv_dprintk("plugin interrupt but phy%d is gone\n",
+				phy_no + mvi->id*mvi->chip->n_phy);
+		}
+	} else if (phy->irq_status & PHYEV_BROAD_CH) {
+		mv_dprintk("port %d broadcast change.\n",
+			phy_no + mvi->id*mvi->chip->n_phy);
+		/* exception for Samsung disk drive*/
+		mdelay(1000);
+		sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+	}
+	MVS_CHIP_DISP->write_port_irq_stat(mvi, phy_no, phy->irq_status);
+}
+
+int mvs_int_rx(struct mvs_info *mvi, bool self_clear)
+{
+	u32 rx_prod_idx, rx_desc;
+	bool attn = false;
+
+	/* the first dword in the RX ring is special: it contains
+	 * a mirror of the hardware's RX producer index, so that
+	 * we don't have to stall the CPU reading that register.
+	 * The actual RX ring is offset by one dword, due to this.
+	 */
+	rx_prod_idx = mvi->rx_cons;
+	mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
+	if (mvi->rx_cons == 0xfff)	/* h/w hasn't touched RX ring yet */
+		return 0;
+
+	/* The CMPL_Q may come late, read from register and try again
+	* note: if coalescing is enabled,
+	* it will need to read from register every time for sure
+	*/
+	if (unlikely(mvi->rx_cons == rx_prod_idx))
+		mvi->rx_cons = MVS_CHIP_DISP->rx_update(mvi) & RX_RING_SZ_MASK;
+
+	if (mvi->rx_cons == rx_prod_idx)
+		return 0;
+
+	while (mvi->rx_cons != rx_prod_idx) {
+		/* increment our internal RX consumer pointer */
+		rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
+		rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
+
+		if (likely(rx_desc & RXQ_DONE))
+			mvs_slot_complete(mvi, rx_desc, 0);
+		if (rx_desc & RXQ_ATTN) {
+			attn = true;
+		} else if (rx_desc & RXQ_ERR) {
+			if (!(rx_desc & RXQ_DONE))
+				mvs_slot_complete(mvi, rx_desc, 0);
+		} else if (rx_desc & RXQ_SLOT_RESET) {
+			mvs_slot_free(mvi, rx_desc);
+		}
+	}
+
+	if (attn && self_clear)
+		MVS_CHIP_DISP->int_full(mvi);
+	return 0;
+}
+
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
new file mode 100644
index 0000000..aa2270a
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -0,0 +1,406 @@
+/*
+ * Marvell 88SE64xx/88SE94xx main function head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MV_SAS_H_
+#define _MV_SAS_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/vmalloc.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include <linux/version.h>
+#include "mv_defs.h"
+
+#define DRV_NAME		"mvsas"
+#define DRV_VERSION		"0.8.2"
+#define _MV_DUMP		0
+#define MVS_ID_NOT_MAPPED	0x7f
+/* #define DISABLE_HOTPLUG_DMA_FIX */
+#define MAX_EXP_RUNNING_REQ	2
+#define WIDE_PORT_MAX_PHY		4
+#define	MV_DISABLE_NCQ	0
+#define mv_printk(fmt, arg ...)	\
+	printk(KERN_DEBUG"%s %d:" fmt, __FILE__, __LINE__, ## arg)
+#ifdef MV_DEBUG
+#define mv_dprintk(format, arg...)	\
+	printk(KERN_DEBUG"%s %d:" format, __FILE__, __LINE__, ## arg)
+#else
+#define mv_dprintk(format, arg...)
+#endif
+#define MV_MAX_U32			0xffffffff
+
+extern struct mvs_tgt_initiator mvs_tgt;
+extern struct mvs_info *tgt_mvi;
+extern const struct mvs_dispatch mvs_64xx_dispatch;
+extern const struct mvs_dispatch mvs_94xx_dispatch;
+
+#define DEV_IS_EXPANDER(type)	\
+	((type == EDGE_DEV) || (type == FANOUT_DEV))
+
+#define bit(n) ((u32)1 << n)
+
+#define for_each_phy(__lseq_mask, __mc, __lseq)			\
+	for ((__mc) = (__lseq_mask), (__lseq) = 0;		\
+					(__mc) != 0 ;		\
+					(++__lseq), (__mc) >>= 1)
+
+#define MV_INIT_DELAYED_WORK(w, f, d)	INIT_DELAYED_WORK(w, f)
+#define UNASSOC_D2H_FIS(id)		\
+	((void *) mvi->rx_fis + 0x100 * id)
+#define SATA_RECEIVED_FIS_LIST(reg_set)	\
+	((void *) mvi->rx_fis + mvi->chip->fis_offs + 0x100 * reg_set)
+#define SATA_RECEIVED_SDB_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x58)
+#define SATA_RECEIVED_D2H_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x40)
+#define SATA_RECEIVED_PIO_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x20)
+#define SATA_RECEIVED_DMA_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x00)
+
+enum dev_status {
+	MVS_DEV_NORMAL = 0x0,
+	MVS_DEV_EH	= 0x1,
+};
+
+
+struct mvs_info;
+
+struct mvs_dispatch {
+	char *name;
+	int (*chip_init)(struct mvs_info *mvi);
+	int (*spi_init)(struct mvs_info *mvi);
+	int (*chip_ioremap)(struct mvs_info *mvi);
+	void (*chip_iounmap)(struct mvs_info *mvi);
+	irqreturn_t (*isr)(struct mvs_info *mvi, int irq, u32 stat);
+	u32 (*isr_status)(struct mvs_info *mvi, int irq);
+	void (*interrupt_enable)(struct mvs_info *mvi);
+	void (*interrupt_disable)(struct mvs_info *mvi);
+
+	u32 (*read_phy_ctl)(struct mvs_info *mvi, u32 port);
+	void (*write_phy_ctl)(struct mvs_info *mvi, u32 port, u32 val);
+
+	u32 (*read_port_cfg_data)(struct mvs_info *mvi, u32 port);
+	void (*write_port_cfg_data)(struct mvs_info *mvi, u32 port, u32 val);
+	void (*write_port_cfg_addr)(struct mvs_info *mvi, u32 port, u32 addr);
+
+	u32 (*read_port_vsr_data)(struct mvs_info *mvi, u32 port);
+	void (*write_port_vsr_data)(struct mvs_info *mvi, u32 port, u32 val);
+	void (*write_port_vsr_addr)(struct mvs_info *mvi, u32 port, u32 addr);
+
+	u32 (*read_port_irq_stat)(struct mvs_info *mvi, u32 port);
+	void (*write_port_irq_stat)(struct mvs_info *mvi, u32 port, u32 val);
+
+	u32 (*read_port_irq_mask)(struct mvs_info *mvi, u32 port);
+	void (*write_port_irq_mask)(struct mvs_info *mvi, u32 port, u32 val);
+
+	void (*get_sas_addr)(void *buf, u32 buflen);
+	void (*command_active)(struct mvs_info *mvi, u32 slot_idx);
+	void (*issue_stop)(struct mvs_info *mvi, enum mvs_port_type type,
+				u32 tfs);
+	void (*start_delivery)(struct mvs_info *mvi, u32 tx);
+	u32 (*rx_update)(struct mvs_info *mvi);
+	void (*int_full)(struct mvs_info *mvi);
+	u8 (*assign_reg_set)(struct mvs_info *mvi, u8 *tfs);
+	void (*free_reg_set)(struct mvs_info *mvi, u8 *tfs);
+	u32 (*prd_size)(void);
+	u32 (*prd_count)(void);
+	void (*make_prd)(struct scatterlist *scatter, int nr, void *prd);
+	void (*detect_porttype)(struct mvs_info *mvi, int i);
+	int (*oob_done)(struct mvs_info *mvi, int i);
+	void (*fix_phy_info)(struct mvs_info *mvi, int i,
+				struct sas_identify_frame *id);
+	void (*phy_work_around)(struct mvs_info *mvi, int i);
+	void (*phy_set_link_rate)(struct mvs_info *mvi, u32 phy_id,
+				struct sas_phy_linkrates *rates);
+	u32 (*phy_max_link_rate)(void);
+	void (*phy_disable)(struct mvs_info *mvi, u32 phy_id);
+	void (*phy_enable)(struct mvs_info *mvi, u32 phy_id);
+	void (*phy_reset)(struct mvs_info *mvi, u32 phy_id, int hard);
+	void (*stp_reset)(struct mvs_info *mvi, u32 phy_id);
+	void (*clear_active_cmds)(struct mvs_info *mvi);
+	u32 (*spi_read_data)(struct mvs_info *mvi);
+	void (*spi_write_data)(struct mvs_info *mvi, u32 data);
+	int (*spi_buildcmd)(struct mvs_info *mvi,
+						u32      *dwCmd,
+						u8       cmd,
+						u8       read,
+						u8       length,
+						u32      addr
+						);
+	int (*spi_issuecmd)(struct mvs_info *mvi, u32 cmd);
+	int (*spi_waitdataready)(struct mvs_info *mvi, u32 timeout);
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	void (*dma_fix)(dma_addr_t buf_dma, int buf_len, int from, void *prd);
+#endif
+
+};
+
+struct mvs_chip_info {
+	u32 		n_host;
+	u32 		n_phy;
+	u32 		fis_offs;
+	u32 		fis_count;
+	u32 		srs_sz;
+	u32 		slot_width;
+	const struct mvs_dispatch *dispatch;
+};
+#define MVS_CHIP_SLOT_SZ	(1U << mvi->chip->slot_width)
+#define MVS_RX_FISL_SZ		\
+	(mvi->chip->fis_offs + (mvi->chip->fis_count * 0x100))
+#define MVS_CHIP_DISP		(mvi->chip->dispatch)
+
+struct mvs_err_info {
+	__le32			flags;
+	__le32			flags2;
+};
+
+struct mvs_cmd_hdr {
+	__le32			flags;	/* PRD tbl len; SAS, SATA ctl */
+	__le32			lens;	/* cmd, max resp frame len */
+	__le32			tags;	/* targ port xfer tag; tag */
+	__le32			data_len;	/* data xfer len */
+	__le64			cmd_tbl;  	/* command table address */
+	__le64			open_frame;	/* open addr frame address */
+	__le64			status_buf;	/* status buffer address */
+	__le64			prd_tbl;		/* PRD tbl address */
+	__le32			reserved[4];
+};
+
+struct mvs_port {
+	struct asd_sas_port	sas_port;
+	u8			port_attached;
+	u8			wide_port_phymap;
+	struct list_head	list;
+};
+
+struct mvs_phy {
+	struct mvs_info 		*mvi;
+	struct mvs_port		*port;
+	struct asd_sas_phy	sas_phy;
+	struct sas_identify	identify;
+	struct scsi_device	*sdev;
+	struct timer_list timer;
+	u64		dev_sas_addr;
+	u64		att_dev_sas_addr;
+	u32		att_dev_info;
+	u32		dev_info;
+	u32		phy_type;
+	u32		phy_status;
+	u32		irq_status;
+	u32		frame_rcvd_size;
+	u8		frame_rcvd[32];
+	u8		phy_attached;
+	u8		phy_mode;
+	u8		reserved[2];
+	u32		phy_event;
+	enum sas_linkrate	minimum_linkrate;
+	enum sas_linkrate	maximum_linkrate;
+};
+
+struct mvs_device {
+	struct list_head		dev_entry;
+	enum sas_dev_type dev_type;
+	struct mvs_info *mvi_info;
+	struct domain_device *sas_device;
+	u32 attached_phy;
+	u32 device_id;
+	u32 runing_req;
+	u8 taskfileset;
+	u8 dev_status;
+	u16 reserved;
+};
+
+struct mvs_slot_info {
+	struct list_head entry;
+	union {
+		struct sas_task *task;
+		void *tdata;
+	};
+	u32 n_elem;
+	u32 tx;
+	u32 slot_tag;
+
+	/* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+	 * and PRD table
+	 */
+	void *buf;
+	dma_addr_t buf_dma;
+#if _MV_DUMP
+	u32 cmd_size;
+#endif
+	void *response;
+	struct mvs_port *port;
+	struct mvs_device	*device;
+	void *open_frame;
+};
+
+struct mvs_info {
+	unsigned long flags;
+
+	/* host-wide lock */
+	spinlock_t lock;
+
+	/* our device */
+	struct pci_dev *pdev;
+	struct device *dev;
+
+	/* enhanced mode registers */
+	void __iomem *regs;
+
+	/* peripheral or soc registers */
+	void __iomem *regs_ex;
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* SCSI/SAS glue */
+	struct sas_ha_struct *sas;
+	struct Scsi_Host *shost;
+
+	/* TX (delivery) DMA ring */
+	__le32 *tx;
+	dma_addr_t tx_dma;
+
+	/* cached next-producer idx */
+	u32 tx_prod;
+
+	/* RX (completion) DMA ring */
+	__le32	*rx;
+	dma_addr_t rx_dma;
+
+	/* RX consumer idx */
+	u32 rx_cons;
+
+	/* RX'd FIS area */
+	__le32 *rx_fis;
+	dma_addr_t rx_fis_dma;
+
+	/* DMA command header slots */
+	struct mvs_cmd_hdr *slot;
+	dma_addr_t slot_dma;
+
+	u32 chip_id;
+	const struct mvs_chip_info *chip;
+
+	int tags_num;
+	DECLARE_BITMAP(tags, MVS_SLOTS);
+	/* further per-slot information */
+	struct mvs_phy phy[MVS_MAX_PHYS];
+	struct mvs_port port[MVS_MAX_PHYS];
+	u32 irq;
+	u32 exp_req;
+	u32 id;
+	u64 sata_reg_set;
+	struct list_head *hba_list;
+	struct list_head soc_entry;
+	struct list_head wq_list;
+	unsigned long instance;
+	u16 flashid;
+	u32 flashsize;
+	u32 flashsectSize;
+
+	void *addon;
+	struct mvs_device	devices[MVS_MAX_DEVICES];
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	void *bulk_buffer;
+	dma_addr_t bulk_buffer_dma;
+#define TRASH_BUCKET_SIZE    	0x20000
+#endif
+	struct mvs_slot_info slot_info[0];
+};
+
+struct mvs_prv_info{
+	u8 n_host;
+	u8 n_phy;
+	u16 reserve;
+	struct mvs_info *mvi[2];
+};
+
+struct mvs_wq {
+	struct delayed_work work_q;
+	struct mvs_info *mvi;
+	void *data;
+	int handler;
+	struct list_head entry;
+};
+
+struct mvs_task_exec_info {
+	struct sas_task *task;
+	struct mvs_cmd_hdr *hdr;
+	struct mvs_port *port;
+	u32 tag;
+	int n_elem;
+};
+
+
+/******************** function prototype *********************/
+void mvs_get_sas_addr(void *buf, u32 buflen);
+void mvs_tag_clear(struct mvs_info *mvi, u32 tag);
+void mvs_tag_free(struct mvs_info *mvi, u32 tag);
+void mvs_tag_set(struct mvs_info *mvi, unsigned int tag);
+int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out);
+void mvs_tag_init(struct mvs_info *mvi);
+void mvs_iounmap(void __iomem *regs);
+int mvs_ioremap(struct mvs_info *mvi, int bar, int bar_ex);
+void mvs_phys_reset(struct mvs_info *mvi, u32 phy_mask, int hard);
+int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+			void *funcdata);
+void __devinit mvs_set_sas_addr(struct mvs_info *mvi, int port_id,
+				u32 off_lo, u32 off_hi, u64 sas_addr);
+int mvs_slave_alloc(struct scsi_device *scsi_dev);
+int mvs_slave_configure(struct scsi_device *sdev);
+void mvs_scan_start(struct Scsi_Host *shost);
+int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time);
+int mvs_queue_command(struct sas_task *task, const int num,
+			gfp_t gfp_flags);
+int mvs_abort_task(struct sas_task *task);
+int mvs_abort_task_set(struct domain_device *dev, u8 *lun);
+int mvs_clear_aca(struct domain_device *dev, u8 *lun);
+int mvs_clear_task_set(struct domain_device *dev, u8 * lun);
+void mvs_port_formed(struct asd_sas_phy *sas_phy);
+void mvs_port_deformed(struct asd_sas_phy *sas_phy);
+int mvs_dev_found(struct domain_device *dev);
+void mvs_dev_gone(struct domain_device *dev);
+int mvs_lu_reset(struct domain_device *dev, u8 *lun);
+int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags);
+int mvs_I_T_nexus_reset(struct domain_device *dev);
+int mvs_query_task(struct sas_task *task);
+void mvs_release_task(struct mvs_info *mvi, int phy_no,
+			struct domain_device *dev);
+void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events);
+void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
+int mvs_int_rx(struct mvs_info *mvi, bool self_clear);
+void mvs_hexdump(u32 size, u8 *data, u32 baseaddr);
+#endif
+
diff --git a/drivers/scsi/osd/Kbuild b/drivers/scsi/osd/Kbuild
index 0e207aa..5fd73d77 100644
--- a/drivers/scsi/osd/Kbuild
+++ b/drivers/scsi/osd/Kbuild
@@ -11,31 +11,6 @@
 # it under the terms of the GNU General Public License version 2
 #
 
-ifneq ($(OSD_INC),)
-# we are built out-of-tree Kconfigure everything as on
-
-CONFIG_SCSI_OSD_INITIATOR=m
-ccflags-y += -DCONFIG_SCSI_OSD_INITIATOR -DCONFIG_SCSI_OSD_INITIATOR_MODULE
-
-CONFIG_SCSI_OSD_ULD=m
-ccflags-y += -DCONFIG_SCSI_OSD_ULD -DCONFIG_SCSI_OSD_ULD_MODULE
-
-# CONFIG_SCSI_OSD_DPRINT_SENSE =
-#	0 - no print of errors
-#	1 - print errors
-#	2 - errors + warrnings
-ccflags-y += -DCONFIG_SCSI_OSD_DPRINT_SENSE=1
-
-# Uncomment to turn debug on
-# ccflags-y += -DCONFIG_SCSI_OSD_DEBUG
-
-# if we are built out-of-tree and the hosting kernel has OSD headers
-# then "ccflags-y +=" will not pick the out-off-tree headers. Only by doing
-# this it will work. This might break in future kernels
-LINUXINCLUDE := -I$(OSD_INC) $(LINUXINCLUDE)
-
-endif
-
 # libosd.ko - osd-initiator library
 libosd-y := osd_initiator.o
 obj-$(CONFIG_SCSI_OSD_INITIATOR) += libosd.o
diff --git a/drivers/scsi/osd/Makefile b/drivers/scsi/osd/Makefile
deleted file mode 100755
index d905344..0000000
--- a/drivers/scsi/osd/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# Makefile for the OSD modules (out of tree)
-#
-# Copyright (C) 2008 Panasas Inc.  All rights reserved.
-#
-# Authors:
-#   Boaz Harrosh <bharrosh@panasas.com>
-#   Benny Halevy <bhalevy@panasas.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2
-#
-# This Makefile is used to call the kernel Makefile in case of an out-of-tree
-# build.
-# $KSRC should point to a Kernel source tree otherwise host's default is
-# used. (eg. /lib/modules/`uname -r`/build)
-
-# include path for out-of-tree Headers
-OSD_INC ?= `pwd`/../../../include
-
-# allow users to override these
-# e.g. to compile for a kernel that you aren't currently running
-KSRC ?= /lib/modules/$(shell uname -r)/build
-KBUILD_OUTPUT ?=
-ARCH ?=
-V ?= 0
-
-# this is the basic Kbuild out-of-tree invocation, with the M= option
-KBUILD_BASE = +$(MAKE) -C $(KSRC) M=`pwd` KBUILD_OUTPUT=$(KBUILD_OUTPUT) ARCH=$(ARCH) V=$(V)
-
-all: libosd
-
-libosd: ;
-	$(KBUILD_BASE) OSD_INC=$(OSD_INC) modules
-
-clean:
-	$(KBUILD_BASE) clean
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 5776b2a..7a117c1 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -118,39 +118,39 @@
 		_osd_ver_desc(or));
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_VENDOR_IDENTIFICATION [%s]\n",
+	OSD_INFO("VENDOR_IDENTIFICATION  [%s]\n",
 		(char *)pFirst);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_PRODUCT_IDENTIFICATION [%s]\n",
+	OSD_INFO("PRODUCT_IDENTIFICATION [%s]\n",
 		(char *)pFirst);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_PRODUCT_MODEL [%s]\n",
+	OSD_INFO("PRODUCT_MODEL          [%s]\n",
 		(char *)pFirst);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_PRODUCT_REVISION_LEVEL [%u]\n",
+	OSD_INFO("PRODUCT_REVISION_LEVEL [%u]\n",
 		pFirst ? get_unaligned_be32(pFirst) : ~0U);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER [%s]\n",
+	OSD_INFO("PRODUCT_SERIAL_NUMBER  [%s]\n",
 		(char *)pFirst);
 
 	pFirst = get_attrs[a].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_OSD_NAME [%s]\n", (char *)pFirst);
+	OSD_INFO("OSD_NAME               [%s]\n", (char *)pFirst);
 	a++;
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_TOTAL_CAPACITY [0x%llx]\n",
+	OSD_INFO("TOTAL_CAPACITY         [0x%llx]\n",
 		pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_USED_CAPACITY [0x%llx]\n",
+	OSD_INFO("USED_CAPACITY          [0x%llx]\n",
 		pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_NUMBER_OF_PARTITIONS [%llu]\n",
+	OSD_INFO("NUMBER_OF_PARTITIONS   [%llu]\n",
 		pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL);
 
 	if (a >= nelem)
@@ -158,7 +158,7 @@
 
 	/* FIXME: Where are the time utilities */
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_CLOCK [0x%02x%02x%02x%02x%02x%02x]\n",
+	OSD_INFO("CLOCK                  [0x%02x%02x%02x%02x%02x%02x]\n",
 		((char *)pFirst)[0], ((char *)pFirst)[1],
 		((char *)pFirst)[2], ((char *)pFirst)[3],
 		((char *)pFirst)[4], ((char *)pFirst)[5]);
@@ -169,7 +169,8 @@
 
 		hex_dump_to_buffer(get_attrs[a].val_ptr, len, 32, 1,
 				   sid_dump, sizeof(sid_dump), true);
-		OSD_INFO("OSD_ATTR_RI_OSD_SYSTEM_ID(%d) [%s]\n", len, sid_dump);
+		OSD_INFO("OSD_SYSTEM_ID(%d)\n"
+			 "        [%s]\n", len, sid_dump);
 		a++;
 	}
 out:
@@ -669,7 +670,7 @@
 	__be16 action, const struct osd_obj_id *obj, osd_id initial_id,
 	struct osd_obj_id_list *list, unsigned nelem)
 {
-	struct request_queue *q = or->osd_dev->scsi_device->request_queue;
+	struct request_queue *q = osd_request_queue(or->osd_dev);
 	u64 len = nelem * sizeof(osd_id) + sizeof(*list);
 	struct bio *bio;
 
@@ -778,16 +779,32 @@
 */
 
 void osd_req_write(struct osd_request *or,
-	const struct osd_obj_id *obj, struct bio *bio, u64 offset)
+	const struct osd_obj_id *obj, u64 offset,
+	struct bio *bio, u64 len)
 {
-	_osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, bio->bi_size);
+	_osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, len);
 	WARN_ON(or->out.bio || or->out.total_bytes);
-	bio->bi_rw |= (1 << BIO_RW);
+	WARN_ON(0 ==  bio_rw_flagged(bio, BIO_RW));
 	or->out.bio = bio;
-	or->out.total_bytes = bio->bi_size;
+	or->out.total_bytes = len;
 }
 EXPORT_SYMBOL(osd_req_write);
 
+int osd_req_write_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
+{
+	struct request_queue *req_q = osd_request_queue(or->osd_dev);
+	struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
+
+	if (IS_ERR(bio))
+		return PTR_ERR(bio);
+
+	bio->bi_rw |= (1 << BIO_RW); /* FIXME: bio_set_dir() */
+	osd_req_write(or, obj, offset, bio, len);
+	return 0;
+}
+EXPORT_SYMBOL(osd_req_write_kern);
+
 /*TODO: void osd_req_append(struct osd_request *,
 	const struct osd_obj_id *, struct bio *data_out); */
 /*TODO: void osd_req_create_write(struct osd_request *,
@@ -813,16 +830,31 @@
 EXPORT_SYMBOL(osd_req_flush_object);
 
 void osd_req_read(struct osd_request *or,
-	const struct osd_obj_id *obj, struct bio *bio, u64 offset)
+	const struct osd_obj_id *obj, u64 offset,
+	struct bio *bio, u64 len)
 {
-	_osd_req_encode_common(or, OSD_ACT_READ, obj, offset, bio->bi_size);
+	_osd_req_encode_common(or, OSD_ACT_READ, obj, offset, len);
 	WARN_ON(or->in.bio || or->in.total_bytes);
-	bio->bi_rw &= ~(1 << BIO_RW);
+	WARN_ON(1 == bio_rw_flagged(bio, BIO_RW));
 	or->in.bio = bio;
-	or->in.total_bytes = bio->bi_size;
+	or->in.total_bytes = len;
 }
 EXPORT_SYMBOL(osd_req_read);
 
+int osd_req_read_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
+{
+	struct request_queue *req_q = osd_request_queue(or->osd_dev);
+	struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
+
+	if (IS_ERR(bio))
+		return PTR_ERR(bio);
+
+	osd_req_read(or, obj, offset, bio, len);
+	return 0;
+}
+EXPORT_SYMBOL(osd_req_read_kern);
+
 void osd_req_get_attributes(struct osd_request *or,
 	const struct osd_obj_id *obj)
 {
@@ -1213,7 +1245,7 @@
 }
 
 static int _osd_req_finalize_data_integrity(struct osd_request *or,
-	bool has_in, bool has_out, const u8 *cap_key)
+	bool has_in, bool has_out, u64 out_data_bytes, const u8 *cap_key)
 {
 	struct osd_security_parameters *sec_parms = _osd_req_sec_params(or);
 	int ret;
@@ -1228,8 +1260,7 @@
 		};
 		unsigned pad;
 
-		or->out_data_integ.data_bytes = cpu_to_be64(
-			or->out.bio ? or->out.bio->bi_size : 0);
+		or->out_data_integ.data_bytes = cpu_to_be64(out_data_bytes);
 		or->out_data_integ.set_attributes_bytes = cpu_to_be64(
 			or->set_attr.total_bytes);
 		or->out_data_integ.get_attributes_bytes = cpu_to_be64(
@@ -1306,6 +1337,8 @@
 
 	or->request = req;
 	req->cmd_type = REQ_TYPE_BLOCK_PC;
+	req->cmd_flags |= REQ_QUIET;
+
 	req->timeout = or->timeout;
 	req->retries = or->retries;
 	req->sense = or->sense;
@@ -1339,6 +1372,7 @@
 {
 	struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb);
 	bool has_in, has_out;
+	u64 out_data_bytes = or->out.total_bytes;
 	int ret;
 
 	if (options & OSD_REQ_FUA)
@@ -1388,7 +1422,8 @@
 		}
 	}
 
-	ret = _osd_req_finalize_data_integrity(or, has_in, has_out, cap_key);
+	ret = _osd_req_finalize_data_integrity(or, has_in, has_out,
+					       out_data_bytes, cap_key);
 	if (ret)
 		return ret;
 
diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c
index 22b59e1..0bdef33 100644
--- a/drivers/scsi/osd/osd_uld.c
+++ b/drivers/scsi/osd/osd_uld.c
@@ -49,6 +49,7 @@
 #include <linux/device.h>
 #include <linux/idr.h>
 #include <linux/major.h>
+#include <linux/file.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_driver.h>
@@ -175,10 +176,9 @@
 
 struct osd_dev *osduld_path_lookup(const char *name)
 {
-	struct path path;
-	struct inode *inode;
-	struct cdev *cdev;
-	struct osd_uld_device *uninitialized_var(oud);
+	struct osd_uld_device *oud;
+	struct osd_dev *od;
+	struct file *file;
 	int error;
 
 	if (!name || !*name) {
@@ -186,52 +186,46 @@
 		return ERR_PTR(-EINVAL);
 	}
 
-	error = kern_path(name, LOOKUP_FOLLOW, &path);
-	if (error) {
-		OSD_ERR("path_lookup of %s failed=>%d\n", name, error);
-		return ERR_PTR(error);
+	od = kzalloc(sizeof(*od), GFP_KERNEL);
+	if (!od)
+		return ERR_PTR(-ENOMEM);
+
+	file = filp_open(name, O_RDWR, 0);
+	if (IS_ERR(file)) {
+		error = PTR_ERR(file);
+		goto free_od;
 	}
 
-	inode = path.dentry->d_inode;
-	error = -EINVAL; /* Not the right device e.g osd_uld_device */
-	if (!S_ISCHR(inode->i_mode)) {
-		OSD_DEBUG("!S_ISCHR()\n");
-		goto out;
+	if (file->f_op != &osd_fops){
+		error = -EINVAL;
+		goto close_file;
 	}
 
-	cdev = inode->i_cdev;
-	if (!cdev) {
-		OSD_ERR("Before mounting an OSD Based filesystem\n");
-		OSD_ERR("  user-mode must open+close the %s device\n", name);
-		OSD_ERR("  Example: bash: echo < %s\n", name);
-		goto out;
-	}
+	oud = file->private_data;
 
-	/* The Magic wand. Is it our char-dev */
-	/* TODO: Support sg devices */
-	if (cdev->owner != THIS_MODULE) {
-		OSD_ERR("Error mounting %s - is not an OSD device\n", name);
-		goto out;
-	}
+	*od = oud->od;
+	od->file = file;
 
-	oud = container_of(cdev, struct osd_uld_device, cdev);
+	return od;
 
-	__uld_get(oud);
-	error = 0;
-
-out:
-	path_put(&path);
-	return error ? ERR_PTR(error) : &oud->od;
+close_file:
+	fput(file);
+free_od:
+	kfree(od);
+	return ERR_PTR(error);
 }
 EXPORT_SYMBOL(osduld_path_lookup);
 
 void osduld_put_device(struct osd_dev *od)
 {
-	if (od) {
-		struct osd_uld_device *oud = container_of(od,
-						struct osd_uld_device, od);
 
-		__uld_put(oud);
+	if (od && !IS_ERR(od)) {
+		struct osd_uld_device *oud = od->file->private_data;
+
+		BUG_ON(od->scsi_device != oud->od.scsi_device);
+
+		fput(od->file);
+		kfree(od);
 	}
 }
 EXPORT_SYMBOL(osduld_put_device);
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 5defe5e..8371d91 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -17,9 +17,12 @@
 * General Public License for more details.
 *
 ******************************************************************************/
-#define QLA1280_VERSION      "3.26"
+#define QLA1280_VERSION      "3.27"
 /*****************************************************************************
     Revision History:
+    Rev  3.27, February 10, 2009, Michael Reed
+	- General code cleanup.
+	- Improve error recovery.
     Rev  3.26, January 16, 2006 Jes Sorensen
 	- Ditch all < 2.6 support
     Rev  3.25.1, February 10, 2005 Christoph Hellwig
@@ -435,7 +438,6 @@
 				   uint8_t, uint16_t *);
 static int qla1280_bus_reset(struct scsi_qla_host *, int);
 static int qla1280_device_reset(struct scsi_qla_host *, int, int);
-static int qla1280_abort_device(struct scsi_qla_host *, int, int, int);
 static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int);
 static int qla1280_abort_isp(struct scsi_qla_host *);
 #ifdef QLA_64BIT_PTR
@@ -698,7 +700,7 @@
 }
 
 /**************************************************************************
- *   qla1200_queuecommand
+ *   qla1280_queuecommand
  *     Queue a command to the controller.
  *
  * Note:
@@ -713,12 +715,14 @@
 {
 	struct Scsi_Host *host = cmd->device->host;
 	struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
-	struct srb *sp = (struct srb *)&cmd->SCp;
+	struct srb *sp = (struct srb *)CMD_SP(cmd);
 	int status;
 
 	cmd->scsi_done = fn;
 	sp->cmd = cmd;
 	sp->flags = 0;
+	sp->wait = NULL;
+	CMD_HANDLE(cmd) = (unsigned char *)NULL;
 
 	qla1280_print_scsi_cmd(5, cmd);
 
@@ -738,21 +742,11 @@
 
 enum action {
 	ABORT_COMMAND,
-	ABORT_DEVICE,
 	DEVICE_RESET,
 	BUS_RESET,
 	ADAPTER_RESET,
-	FAIL
 };
 
-/* timer action for error action processor */
-static void qla1280_error_wait_timeout(unsigned long __data)
-{
-	struct scsi_cmnd *cmd = (struct scsi_cmnd *)__data;
-	struct srb *sp = (struct srb *)CMD_SP(cmd);
-
-	complete(sp->wait);
-}
 
 static void qla1280_mailbox_timeout(unsigned long __data)
 {
@@ -767,8 +761,67 @@
 	complete(ha->mailbox_wait);
 }
 
+static int
+_qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp,
+				 struct completion *wait)
+{
+	int	status = FAILED;
+	struct scsi_cmnd *cmd = sp->cmd;
+
+	spin_unlock_irq(ha->host->host_lock);
+	wait_for_completion_timeout(wait, 4*HZ);
+	spin_lock_irq(ha->host->host_lock);
+	sp->wait = NULL;
+	if(CMD_HANDLE(cmd) == COMPLETED_HANDLE) {
+		status = SUCCESS;
+		(*cmd->scsi_done)(cmd);
+	}
+	return status;
+}
+
+static int
+qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp)
+{
+	DECLARE_COMPLETION_ONSTACK(wait);
+
+	sp->wait = &wait;
+	return _qla1280_wait_for_single_command(ha, sp, &wait);
+}
+
+static int
+qla1280_wait_for_pending_commands(struct scsi_qla_host *ha, int bus, int target)
+{
+	int		cnt;
+	int		status;
+	struct srb	*sp;
+	struct scsi_cmnd *cmd;
+
+	status = SUCCESS;
+
+	/*
+	 * Wait for all commands with the designated bus/target
+	 * to be completed by the firmware
+	 */
+	for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+		sp = ha->outstanding_cmds[cnt];
+		if (sp) {
+			cmd = sp->cmd;
+
+			if (bus >= 0 && SCSI_BUS_32(cmd) != bus)
+				continue;
+			if (target >= 0 && SCSI_TCN_32(cmd) != target)
+				continue;
+
+			status = qla1280_wait_for_single_command(ha, sp);
+			if (status == FAILED)
+				break;
+		}
+	}
+	return status;
+}
+
 /**************************************************************************
- * qla1200_error_action
+ * qla1280_error_action
  *    The function will attempt to perform a specified error action and
  *    wait for the results (or time out).
  *
@@ -780,11 +833,6 @@
  * Returns:
  *      SUCCESS or FAILED
  *
- * Note:
- *      Resetting the bus always succeeds - is has to, otherwise the
- *      kernel will panic! Try a surgical technique - sending a BUS
- *      DEVICE RESET message - on the offending target before pulling
- *      the SCSI bus reset line.
  **************************************************************************/
 static int
 qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
@@ -792,13 +840,19 @@
 	struct scsi_qla_host *ha;
 	int bus, target, lun;
 	struct srb *sp;
-	uint16_t data;
-	unsigned char *handle;
-	int result, i;
+	int i, found;
+	int result=FAILED;
+	int wait_for_bus=-1;
+	int wait_for_target = -1;
 	DECLARE_COMPLETION_ONSTACK(wait);
-	struct timer_list timer;
+
+	ENTER("qla1280_error_action");
 
 	ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata);
+	sp = (struct srb *)CMD_SP(cmd);
+	bus = SCSI_BUS_32(cmd);
+	target = SCSI_TCN_32(cmd);
+	lun = SCSI_LUN_32(cmd);
 
 	dprintk(4, "error_action %i, istatus 0x%04x\n", action,
 		RD_REG_WORD(&ha->iobase->istatus));
@@ -807,99 +861,47 @@
 		RD_REG_WORD(&ha->iobase->host_cmd),
 		RD_REG_WORD(&ha->iobase->ictrl), jiffies);
 
-	ENTER("qla1280_error_action");
 	if (qla1280_verbose)
 		printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, "
 		       "Handle=0x%p, action=0x%x\n",
 		       ha->host_no, cmd, CMD_HANDLE(cmd), action);
 
-	if (cmd == NULL) {
-		printk(KERN_WARNING "(scsi?:?:?:?) Reset called with NULL "
-		       "si_Cmnd pointer, failing.\n");
-		LEAVE("qla1280_error_action");
-		return FAILED;
-	}
-
-	ha = (struct scsi_qla_host *)cmd->device->host->hostdata;
-	sp = (struct srb *)CMD_SP(cmd);
-	handle = CMD_HANDLE(cmd);
-
-	/* Check for pending interrupts. */
-	data = qla1280_debounce_register(&ha->iobase->istatus);
 	/*
-	 * The io_request_lock is held when the reset handler is called, hence
-	 * the interrupt handler cannot be running in parallel as it also
-	 * grabs the lock. /Jes
+	 * Check to see if we have the command in the outstanding_cmds[]
+	 * array.  If not then it must have completed before this error
+	 * action was initiated.  If the error_action isn't ABORT_COMMAND
+	 * then the driver must proceed with the requested action.
 	 */
-	if (data & RISC_INT)
-		qla1280_isr(ha, &ha->done_q);
-
-	/*
-	 * Determine the suggested action that the mid-level driver wants
-	 * us to perform.
-	 */
-	if (handle == (unsigned char *)INVALID_HANDLE || handle == NULL) {
-		if(action == ABORT_COMMAND) {
-			/* we never got this command */
-			printk(KERN_INFO "qla1280: Aborting a NULL handle\n");
-			return SUCCESS;	/* no action - we don't have command */
-		}
-	} else {
-		sp->wait = &wait;
-	}
-
-	bus = SCSI_BUS_32(cmd);
-	target = SCSI_TCN_32(cmd);
-	lun = SCSI_LUN_32(cmd);
-
-	/* Overloading result.  Here it means the success or fail of the
-	 * *issue* of the action.  When we return from the routine, it must
-	 * mean the actual success or fail of the action */
-	result = FAILED;
-	switch (action) {
-	case FAIL:
-		break;
-
-	case ABORT_COMMAND:
-		if ((sp->flags & SRB_ABORT_PENDING)) {
-			printk(KERN_WARNING
-			       "scsi(): Command has a pending abort "
-			       "message - ABORT_PENDING.\n");
-			/* This should technically be impossible since we
-			 * now wait for abort completion */
+	found = -1;
+	for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
+		if (sp == ha->outstanding_cmds[i]) {
+			found = i;
+			sp->wait = &wait; /* we'll wait for it to complete */
 			break;
 		}
+	}
 
-		for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
-			if (sp == ha->outstanding_cmds[i]) {
-				dprintk(1, "qla1280: RISC aborting command\n");
-				if (qla1280_abort_command(ha, sp, i) == 0)
-					result = SUCCESS;
-				else {
-					/*
-					 * Since we don't know what might
-					 * have happend to the command, it
-					 * is unsafe to remove it from the
-					 * device's queue at this point.
-					 * Wait and let the escalation
-					 * process take care of it.
-					 */
-					printk(KERN_WARNING
-					       "scsi(%li:%i:%i:%i): Unable"
-					       " to abort command!\n",
-					       ha->host_no, bus, target, lun);
-				}
-			}
-		}
-		break;
-
-	case ABORT_DEVICE:
-		if (qla1280_verbose)
+	if (found < 0) {	/* driver doesn't have command */
+		result = SUCCESS;
+		if (qla1280_verbose) {
 			printk(KERN_INFO
-			       "scsi(%ld:%d:%d:%d): Queueing abort device "
-			       "command.\n", ha->host_no, bus, target, lun);
-		if (qla1280_abort_device(ha, bus, target, lun) == 0)
-			result = SUCCESS;
+			       "scsi(%ld:%d:%d:%d): specified command has "
+			       "already completed.\n", ha->host_no, bus,
+				target, lun);
+		}
+	}
+
+	switch (action) {
+
+	case ABORT_COMMAND:
+		dprintk(1, "qla1280: RISC aborting command\n");
+		/*
+		 * The abort might fail due to race when the host_lock
+		 * is released to issue the abort.  As such, we
+		 * don't bother to check the return status.
+		 */
+		if (found >= 0)
+			qla1280_abort_command(ha, sp, found);
 		break;
 
 	case DEVICE_RESET:
@@ -907,16 +909,21 @@
 			printk(KERN_INFO
 			       "scsi(%ld:%d:%d:%d): Queueing device reset "
 			       "command.\n", ha->host_no, bus, target, lun);
-		if (qla1280_device_reset(ha, bus, target) == 0)
-			result = SUCCESS;
+		if (qla1280_device_reset(ha, bus, target) == 0) {
+			/* issued device reset, set wait conditions */
+			wait_for_bus = bus;
+			wait_for_target = target;
+		}
 		break;
 
 	case BUS_RESET:
 		if (qla1280_verbose)
 			printk(KERN_INFO "qla1280(%ld:%d): Issued bus "
 			       "reset.\n", ha->host_no, bus);
-		if (qla1280_bus_reset(ha, bus) == 0)
-			result = SUCCESS;
+		if (qla1280_bus_reset(ha, bus) == 0) {
+			/* issued bus reset, set wait conditions */
+			wait_for_bus = bus;
+		}
 		break;
 
 	case ADAPTER_RESET:
@@ -929,55 +936,48 @@
 			       "continue automatically\n", ha->host_no);
 		}
 		ha->flags.reset_active = 1;
-		/*
-		 * We restarted all of the commands automatically, so the
-		 * mid-level code can expect completions momentitarily.
-		 */
-		if (qla1280_abort_isp(ha) == 0)
-			result = SUCCESS;
+
+		if (qla1280_abort_isp(ha) != 0) {	/* it's dead */
+			result = FAILED;
+		}
 
 		ha->flags.reset_active = 0;
 	}
 
-	if (!list_empty(&ha->done_q))
-		qla1280_done(ha);
+	/*
+	 * At this point, the host_lock has been released and retaken
+	 * by the issuance of the mailbox command.
+	 * Wait for the command passed in by the mid-layer if it
+	 * was found by the driver.  It might have been returned
+	 * between eh recovery steps, hence the check of the "found"
+	 * variable.
+	 */
 
-	/* If we didn't manage to issue the action, or we have no
-	 * command to wait for, exit here */
-	if (result == FAILED || handle == NULL ||
-	    handle == (unsigned char *)INVALID_HANDLE) {
-		/*
-		 * Clear completion queue to avoid qla1280_done() trying
-		 * to complete the command at a later stage after we
-		 * have exited the current context
-		 */
-		sp->wait = NULL;
-		goto leave;
+	if (found >= 0)
+		result = _qla1280_wait_for_single_command(ha, sp, &wait);
+
+	if (action == ABORT_COMMAND && result != SUCCESS) {
+		printk(KERN_WARNING
+		       "scsi(%li:%i:%i:%i): "
+		       "Unable to abort command!\n",
+		       ha->host_no, bus, target, lun);
 	}
 
-	/* set up a timer just in case we're really jammed */
-	init_timer(&timer);
-	timer.expires = jiffies + 4*HZ;
-	timer.data = (unsigned long)cmd;
-	timer.function = qla1280_error_wait_timeout;
-	add_timer(&timer);
-
-	/* wait for the action to complete (or the timer to expire) */
-	spin_unlock_irq(ha->host->host_lock);
-	wait_for_completion(&wait);
-	del_timer_sync(&timer);
-	spin_lock_irq(ha->host->host_lock);
-	sp->wait = NULL;
-
-	/* the only action we might get a fail for is abort */
-	if (action == ABORT_COMMAND) {
-		if(sp->flags & SRB_ABORTED)
-			result = SUCCESS;
-		else
-			result = FAILED;
+	/*
+	 * If the command passed in by the mid-layer has been
+	 * returned by the board, then wait for any additional
+	 * commands which are supposed to complete based upon
+	 * the error action.
+	 *
+	 * All commands are unconditionally returned during a
+	 * call to qla1280_abort_isp(), ADAPTER_RESET.  No need
+	 * to wait for them.
+	 */
+	if (result == SUCCESS && wait_for_bus >= 0) {
+		result = qla1280_wait_for_pending_commands(ha,
+					wait_for_bus, wait_for_target);
 	}
 
- leave:
 	dprintk(1, "RESET returning %d\n", result);
 
 	LEAVE("qla1280_error_action");
@@ -1280,13 +1280,12 @@
 		switch ((CMD_RESULT(cmd) >> 16)) {
 		case DID_RESET:
 			/* Issue marker command. */
-			qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
+			if (!ha->flags.abort_isp_active)
+				qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
 			break;
 		case DID_ABORT:
 			sp->flags &= ~SRB_ABORT_PENDING;
 			sp->flags |= SRB_ABORTED;
-			if (sp->flags & SRB_TIMEOUT)
-				CMD_RESULT(sp->cmd) = DID_TIME_OUT << 16;
 			break;
 		default:
 			break;
@@ -1296,12 +1295,11 @@
 		scsi_dma_unmap(cmd);
 
 		/* Call the mid-level driver interrupt handler */
-		CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE;
 		ha->actthreads--;
 
-		(*(cmd)->scsi_done)(cmd);
-
-		if(sp->wait != NULL)
+		if (sp->wait == NULL)
+			(*(cmd)->scsi_done)(cmd);
+		else
 			complete(sp->wait);
 	}
 	LEAVE("qla1280_done");
@@ -2417,9 +2415,6 @@
 qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
 {
 	struct device_reg __iomem *reg = ha->iobase;
-#if 0
-	LIST_HEAD(done_q);
-#endif
 	int status = 0;
 	int cnt;
 	uint16_t *optr, *iptr;
@@ -2493,19 +2488,9 @@
 	mr = MAILBOX_REGISTER_COUNT;
 	memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t));
 
-#if 0
-	/* Go check for any response interrupts pending. */
-	qla1280_isr(ha, &done_q);
-#endif
-
 	if (ha->flags.reset_marker)
 		qla1280_rst_aen(ha);
 
-#if 0
-	if (!list_empty(&done_q))
-		qla1280_done(ha, &done_q);
-#endif
-
 	if (status)
 		dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = "
 			"0x%x ****\n", mb[0]);
@@ -2641,41 +2626,6 @@
 }
 
 /*
- * qla1280_abort_device
- *      Issue an abort message to the device
- *
- * Input:
- *      ha     = adapter block pointer.
- *      bus    = SCSI BUS.
- *      target = SCSI ID.
- *      lun    = SCSI LUN.
- *
- * Returns:
- *      0 = success
- */
-static int
-qla1280_abort_device(struct scsi_qla_host *ha, int bus, int target, int lun)
-{
-	uint16_t mb[MAILBOX_REGISTER_COUNT];
-	int status;
-
-	ENTER("qla1280_abort_device");
-
-	mb[0] = MBC_ABORT_DEVICE;
-	mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
-	status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
-
-	/* Issue marker command. */
-	qla1280_marker(ha, bus, target, lun, MK_SYNC_ID_LUN);
-
-	if (status)
-		dprintk(2, "qla1280_abort_device: **** FAILED ****\n");
-
-	LEAVE("qla1280_abort_device");
-	return status;
-}
-
-/*
  * qla1280_abort_command
  *      Abort command aborts a specified IOCB.
  *
@@ -2833,7 +2783,7 @@
 
 	/* If room for request in request ring. */
 	if ((req_cnt + 2) >= ha->req_q_cnt) {
-		status = 1;
+		status = SCSI_MLQUEUE_HOST_BUSY;
 		dprintk(2, "qla1280_start_scsi: in-ptr=0x%x  req_q_cnt="
 			"0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt,
 			req_cnt);
@@ -2845,7 +2795,7 @@
 		     ha->outstanding_cmds[cnt] != NULL; cnt++);
 
 	if (cnt >= MAX_OUTSTANDING_COMMANDS) {
-		status = 1;
+		status = SCSI_MLQUEUE_HOST_BUSY;
 		dprintk(2, "qla1280_start_scsi: NO ROOM IN "
 			"OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt);
 		goto out;
@@ -3108,7 +3058,7 @@
 		ha->req_q_cnt, seg_cnt);
 	/* If room for request in request ring. */
 	if ((req_cnt + 2) >= ha->req_q_cnt) {
-		status = 1;
+		status = SCSI_MLQUEUE_HOST_BUSY;
 		dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, "
 			"req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index,
 			ha->req_q_cnt, req_cnt);
@@ -3120,7 +3070,7 @@
 		     (ha->outstanding_cmds[cnt] != 0); cnt++) ;
 
 	if (cnt >= MAX_OUTSTANDING_COMMANDS) {
-		status = 1;
+		status = SCSI_MLQUEUE_HOST_BUSY;
 		dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING "
 			"ARRAY, req_q_cnt=0x%x\n", ha->req_q_cnt);
 		goto out;
@@ -3487,6 +3437,7 @@
 
 					/* Save ISP completion status */
 					CMD_RESULT(sp->cmd) = 0;
+					CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
 
 					/* Place block on done queue */
 					list_add_tail(&sp->list, done_q);
@@ -3495,7 +3446,7 @@
 					 * If we get here we have a real problem!
 					 */
 					printk(KERN_WARNING
-					       "qla1280: ISP invalid handle");
+					       "qla1280: ISP invalid handle\n");
 				}
 			}
 			break;
@@ -3753,6 +3704,8 @@
 		}
 	}
 
+	CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
+
 	/* Place command on done queue. */
 	list_add_tail(&sp->list, done_q);
  out:
@@ -3808,6 +3761,8 @@
 			CMD_RESULT(sp->cmd) = DID_ERROR << 16;
 		}
 
+		CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
+
 		/* Place command on done queue. */
 		list_add_tail(&sp->list, done_q);
 	}
@@ -3858,19 +3813,16 @@
 		struct scsi_cmnd *cmd;
 		sp = ha->outstanding_cmds[cnt];
 		if (sp) {
-
 			cmd = sp->cmd;
 			CMD_RESULT(cmd) = DID_RESET << 16;
-
-			sp->cmd = NULL;
+			CMD_HANDLE(cmd) = COMPLETED_HANDLE;
 			ha->outstanding_cmds[cnt] = NULL;
-
-			(*cmd->scsi_done)(cmd);
-
-			sp->flags = 0;
+			list_add_tail(&sp->list, &ha->done_q);
 		}
 	}
 
+	qla1280_done(ha);
+
 	status = qla1280_load_firmware(ha);
 	if (status)
 		goto out;
@@ -3955,13 +3907,6 @@
 
 		if (scsi_control == SCSI_PHASE_INVALID) {
 			ha->bus_settings[bus].scsi_bus_dead = 1;
-#if 0
-			CMD_RESULT(cp) = DID_NO_CONNECT << 16;
-			CMD_HANDLE(cp) = INVALID_HANDLE;
-			/* ha->actthreads--; */
-
-			(*(cp)->scsi_done)(cp);
-#endif
 			return 1;	/* bus is dead */
 		} else {
 			ha->bus_settings[bus].scsi_bus_dead = 0;
diff --git a/drivers/scsi/qla1280.h b/drivers/scsi/qla1280.h
index d7c44b8..834884b 100644
--- a/drivers/scsi/qla1280.h
+++ b/drivers/scsi/qla1280.h
@@ -88,7 +88,8 @@
 
 /* Maximum outstanding commands in ISP queues */
 #define MAX_OUTSTANDING_COMMANDS	512
-#define INVALID_HANDLE			(MAX_OUTSTANDING_COMMANDS + 2)
+#define COMPLETED_HANDLE		((unsigned char *) \
+					(MAX_OUTSTANDING_COMMANDS + 2))
 
 /* ISP request and response entry counts (37-65535) */
 #define REQUEST_ENTRY_CNT		255 /* Number of request entries. */
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index b09993a..0f87962 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -97,7 +97,7 @@
 		return 0;
 
 	if (IS_NOCACHE_VPD_TYPE(ha))
-		ha->isp_ops->read_optrom(vha, ha->vpd, ha->flt_region_nvram << 2,
+		ha->isp_ops->read_optrom(vha, ha->nvram, ha->flt_region_nvram << 2,
 		    ha->nvram_size);
 	return memory_read_from_buffer(buf, count, &off, ha->nvram,
 					ha->nvram_size);
@@ -692,6 +692,109 @@
 	.read = qla2x00_sysfs_read_edc_status,
 };
 
+static ssize_t
+qla2x00_sysfs_read_xgmac_stats(struct kobject *kobj,
+		       struct bin_attribute *bin_attr,
+		       char *buf, loff_t off, size_t count)
+{
+	struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
+	    struct device, kobj)));
+	struct qla_hw_data *ha = vha->hw;
+	int rval;
+	uint16_t actual_size;
+
+	if (!capable(CAP_SYS_ADMIN) || off != 0 || count > XGMAC_DATA_SIZE)
+		return 0;
+
+	if (ha->xgmac_data)
+		goto do_read;
+
+	ha->xgmac_data = dma_alloc_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE,
+	    &ha->xgmac_data_dma, GFP_KERNEL);
+	if (!ha->xgmac_data) {
+		qla_printk(KERN_WARNING, ha,
+		    "Unable to allocate memory for XGMAC read-data.\n");
+		return 0;
+	}
+
+do_read:
+	actual_size = 0;
+	memset(ha->xgmac_data, 0, XGMAC_DATA_SIZE);
+
+	rval = qla2x00_get_xgmac_stats(vha, ha->xgmac_data_dma,
+	    XGMAC_DATA_SIZE, &actual_size);
+	if (rval != QLA_SUCCESS) {
+		qla_printk(KERN_WARNING, ha,
+		    "Unable to read XGMAC data (%x).\n", rval);
+		count = 0;
+	}
+
+	count = actual_size > count ? count: actual_size;
+	memcpy(buf, ha->xgmac_data, count);
+
+	return count;
+}
+
+static struct bin_attribute sysfs_xgmac_stats_attr = {
+	.attr = {
+		.name = "xgmac_stats",
+		.mode = S_IRUSR,
+	},
+	.size = 0,
+	.read = qla2x00_sysfs_read_xgmac_stats,
+};
+
+static ssize_t
+qla2x00_sysfs_read_dcbx_tlv(struct kobject *kobj,
+		       struct bin_attribute *bin_attr,
+		       char *buf, loff_t off, size_t count)
+{
+	struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
+	    struct device, kobj)));
+	struct qla_hw_data *ha = vha->hw;
+	int rval;
+	uint16_t actual_size;
+
+	if (!capable(CAP_SYS_ADMIN) || off != 0 || count > DCBX_TLV_DATA_SIZE)
+		return 0;
+
+	if (ha->dcbx_tlv)
+		goto do_read;
+
+	ha->dcbx_tlv = dma_alloc_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
+	    &ha->dcbx_tlv_dma, GFP_KERNEL);
+	if (!ha->dcbx_tlv) {
+		qla_printk(KERN_WARNING, ha,
+		    "Unable to allocate memory for DCBX TLV read-data.\n");
+		return 0;
+	}
+
+do_read:
+	actual_size = 0;
+	memset(ha->dcbx_tlv, 0, DCBX_TLV_DATA_SIZE);
+
+	rval = qla2x00_get_dcbx_params(vha, ha->dcbx_tlv_dma,
+	    DCBX_TLV_DATA_SIZE);
+	if (rval != QLA_SUCCESS) {
+		qla_printk(KERN_WARNING, ha,
+		    "Unable to read DCBX TLV data (%x).\n", rval);
+		count = 0;
+	}
+
+	memcpy(buf, ha->dcbx_tlv, count);
+
+	return count;
+}
+
+static struct bin_attribute sysfs_dcbx_tlv_attr = {
+	.attr = {
+		.name = "dcbx_tlv",
+		.mode = S_IRUSR,
+	},
+	.size = 0,
+	.read = qla2x00_sysfs_read_dcbx_tlv,
+};
+
 static struct sysfs_entry {
 	char *name;
 	struct bin_attribute *attr;
@@ -706,6 +809,8 @@
 	{ "reset", &sysfs_reset_attr, },
 	{ "edc", &sysfs_edc_attr, 2 },
 	{ "edc_status", &sysfs_edc_status_attr, 2 },
+	{ "xgmac_stats", &sysfs_xgmac_stats_attr, 3 },
+	{ "dcbx_tlv", &sysfs_dcbx_tlv_attr, 3 },
 	{ NULL },
 };
 
@@ -721,6 +826,8 @@
 			continue;
 		if (iter->is4GBp_only == 2 && !IS_QLA25XX(vha->hw))
 			continue;
+		if (iter->is4GBp_only == 3 && !IS_QLA81XX(vha->hw))
+			continue;
 
 		ret = sysfs_create_bin_file(&host->shost_gendev.kobj,
 		    iter->attr);
@@ -743,6 +850,8 @@
 			continue;
 		if (iter->is4GBp_only == 2 && !IS_QLA25XX(ha))
 			continue;
+		if (iter->is4GBp_only == 3 && !IS_QLA81XX(ha))
+			continue;
 
 		sysfs_remove_bin_file(&host->shost_gendev.kobj,
 		    iter->attr);
@@ -1088,6 +1197,58 @@
 	return snprintf(buf, PAGE_SIZE, "0x%x\n", ha->fdt_block_size);
 }
 
+static ssize_t
+qla2x00_vlan_id_show(struct device *dev, struct device_attribute *attr,
+    char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+	if (!IS_QLA81XX(vha->hw))
+		return snprintf(buf, PAGE_SIZE, "\n");
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", vha->fcoe_vlan_id);
+}
+
+static ssize_t
+qla2x00_vn_port_mac_address_show(struct device *dev,
+    struct device_attribute *attr, char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+	if (!IS_QLA81XX(vha->hw))
+		return snprintf(buf, PAGE_SIZE, "\n");
+
+	return snprintf(buf, PAGE_SIZE, "%02x:%02x:%02x:%02x:%02x:%02x\n",
+	    vha->fcoe_vn_port_mac[5], vha->fcoe_vn_port_mac[4],
+	    vha->fcoe_vn_port_mac[3], vha->fcoe_vn_port_mac[2],
+	    vha->fcoe_vn_port_mac[1], vha->fcoe_vn_port_mac[0]);
+}
+
+static ssize_t
+qla2x00_fabric_param_show(struct device *dev, struct device_attribute *attr,
+    char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", vha->hw->switch_cap);
+}
+
+static ssize_t
+qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
+    char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+	int rval;
+	uint16_t state[5];
+
+	rval = qla2x00_get_firmware_state(vha, state);
+	if (rval != QLA_SUCCESS)
+		memset(state, -1, sizeof(state));
+
+	return snprintf(buf, PAGE_SIZE, "0x%x 0x%x 0x%x 0x%x 0x%x\n", state[0],
+	    state[1], state[2], state[3], state[4]);
+}
+
 static DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show, NULL);
 static DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
 static DEVICE_ATTR(serial_num, S_IRUGO, qla2x00_serial_num_show, NULL);
@@ -1116,6 +1277,11 @@
 static DEVICE_ATTR(phy_version, S_IRUGO, qla2x00_phy_version_show, NULL);
 static DEVICE_ATTR(flash_block_size, S_IRUGO, qla2x00_flash_block_size_show,
 		   NULL);
+static DEVICE_ATTR(vlan_id, S_IRUGO, qla2x00_vlan_id_show, NULL);
+static DEVICE_ATTR(vn_port_mac_address, S_IRUGO,
+		   qla2x00_vn_port_mac_address_show, NULL);
+static DEVICE_ATTR(fabric_param, S_IRUGO, qla2x00_fabric_param_show, NULL);
+static DEVICE_ATTR(fw_state, S_IRUGO, qla2x00_fw_state_show, NULL);
 
 struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_driver_version,
@@ -1138,6 +1304,10 @@
 	&dev_attr_mpi_version,
 	&dev_attr_phy_version,
 	&dev_attr_flash_block_size,
+	&dev_attr_vlan_id,
+	&dev_attr_vn_port_mac_address,
+	&dev_attr_fabric_param,
+	&dev_attr_fw_state,
 	NULL,
 };
 
@@ -1313,7 +1483,8 @@
 	 * At this point all fcport's software-states are cleared.  Perform any
 	 * final cleanup of firmware resources (PCBs and XCBs).
 	 */
-	if (fcport->loop_id != FC_NO_LOOP_ID)
+	if (fcport->loop_id != FC_NO_LOOP_ID &&
+	    !test_bit(UNLOADING, &fcport->vha->dpc_flags))
 		fcport->vha->hw->isp_ops->fabric_logout(fcport->vha,
 			fcport->loop_id, fcport->d_id.b.domain,
 			fcport->d_id.b.area, fcport->d_id.b.al_pa);
@@ -1437,11 +1608,13 @@
 qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
 {
 	int	ret = 0;
-	int	cnt = 0;
-	uint8_t	qos = QLA_DEFAULT_QUE_QOS;
+	uint8_t	qos = 0;
 	scsi_qla_host_t *base_vha = shost_priv(fc_vport->shost);
 	scsi_qla_host_t *vha = NULL;
 	struct qla_hw_data *ha = base_vha->hw;
+	uint16_t options = 0;
+	int	cnt;
+	struct req_que *req = ha->req_q_map[0];
 
 	ret = qla24xx_vport_create_req_sanity_check(fc_vport);
 	if (ret) {
@@ -1497,23 +1670,39 @@
 
 	qla24xx_vport_disable(fc_vport, disable);
 
-	/* Create a queue pair for the vport */
-	if (ha->mqenable) {
-		if (ha->npiv_info) {
-			for (; cnt < ha->nvram_npiv_size; cnt++) {
-				if (ha->npiv_info[cnt].port_name ==
-					vha->port_name &&
-					ha->npiv_info[cnt].node_name ==
-					vha->node_name) {
-					qos = ha->npiv_info[cnt].q_qos;
-					break;
-				}
-			}
+	if (ql2xmultique_tag) {
+		req = ha->req_q_map[1];
+		goto vport_queue;
+	} else if (ql2xmaxqueues == 1 || !ha->npiv_info)
+		goto vport_queue;
+	/* Create a request queue in QoS mode for the vport */
+	for (cnt = 0; cnt < ha->nvram_npiv_size; cnt++) {
+		if (memcmp(ha->npiv_info[cnt].port_name, vha->port_name, 8) == 0
+			&& memcmp(ha->npiv_info[cnt].node_name, vha->node_name,
+					8) == 0) {
+			qos = ha->npiv_info[cnt].q_qos;
+			break;
 		}
-		qla25xx_create_queues(vha, qos);
+	}
+	if (qos) {
+		ret = qla25xx_create_req_que(ha, options, vha->vp_idx, 0, 0,
+			qos);
+		if (!ret)
+			qla_printk(KERN_WARNING, ha,
+			"Can't create request queue for vp_idx:%d\n",
+			vha->vp_idx);
+		else {
+			DEBUG2(qla_printk(KERN_INFO, ha,
+			"Request Que:%d (QoS: %d) created for vp_idx:%d\n",
+			ret, qos, vha->vp_idx));
+			req = ha->req_q_map[ret];
+		}
 	}
 
+vport_queue:
+	vha->req = req;
 	return 0;
+
 vport_create_failed_2:
 	qla24xx_disable_vp(vha);
 	qla24xx_deallocate_vp_id(vha);
@@ -1554,8 +1743,8 @@
 		    vha->host_no, vha->vp_idx, vha));
         }
 
-	if (ha->mqenable) {
-		if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
+	if (vha->req->id && !ql2xmultique_tag) {
+		if (qla25xx_delete_req_que(vha, vha->req) != QLA_SUCCESS)
 			qla_printk(KERN_WARNING, ha,
 				"Queue delete failed.\n");
 	}
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 34760f8..4a990f4 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -149,11 +149,9 @@
 	int rval = QLA_SUCCESS;
 	uint32_t cnt;
 
-	if (RD_REG_DWORD(&reg->hccr) & HCCRX_RISC_PAUSE)
-		return rval;
-
 	WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_PAUSE);
-	for (cnt = 30000; (RD_REG_DWORD(&reg->hccr) & HCCRX_RISC_PAUSE) == 0 &&
+	for (cnt = 30000;
+	    ((RD_REG_DWORD(&reg->host_status) & HSRX_RISC_PAUSED) == 0) &&
 	    rval == QLA_SUCCESS; cnt--) {
 		if (cnt)
 			udelay(100);
@@ -351,7 +349,7 @@
 qla25xx_copy_mq(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain)
 {
 	uint32_t cnt, que_idx;
-	uint8_t req_cnt, rsp_cnt, que_cnt;
+	uint8_t que_cnt;
 	struct qla2xxx_mq_chain *mq = ptr;
 	struct device_reg_25xxmq __iomem *reg;
 
@@ -363,9 +361,8 @@
 	mq->type = __constant_htonl(DUMP_CHAIN_MQ);
 	mq->chain_size = __constant_htonl(sizeof(struct qla2xxx_mq_chain));
 
-	req_cnt = find_first_zero_bit(ha->req_qid_map, ha->max_queues);
-	rsp_cnt = find_first_zero_bit(ha->rsp_qid_map, ha->max_queues);
-	que_cnt = req_cnt > rsp_cnt ? req_cnt : rsp_cnt;
+	que_cnt = ha->max_req_queues > ha->max_rsp_queues ?
+		ha->max_req_queues : ha->max_rsp_queues;
 	mq->count = htonl(que_cnt);
 	for (cnt = 0; cnt < que_cnt; cnt++) {
 		reg = (struct device_reg_25xxmq *) ((void *)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 714ee67..00aa48d 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -93,6 +93,7 @@
 #define LSD(x)	((uint32_t)((uint64_t)(x)))
 #define MSD(x)	((uint32_t)((((uint64_t)(x)) >> 16) >> 16))
 
+#define MAKE_HANDLE(x, y) ((uint32_t)((((uint32_t)(x)) << 16) | (uint32_t)(y)))
 
 /*
  * I/O register
@@ -179,6 +180,7 @@
 #define REQUEST_ENTRY_CNT_24XX		2048	/* Number of request entries. */
 #define RESPONSE_ENTRY_CNT_2100		64	/* Number of response entries.*/
 #define RESPONSE_ENTRY_CNT_2300		512	/* Number of response entries.*/
+#define RESPONSE_ENTRY_CNT_MQ		128	/* Number of response entries.*/
 
 struct req_que;
 
@@ -186,7 +188,6 @@
  * SCSI Request Block
  */
 typedef struct srb {
-	struct req_que *que;
 	struct fc_port *fcport;
 
 	struct scsi_cmnd *cmd;		/* Linux SCSI command pkt */
@@ -2008,7 +2009,7 @@
 #define VP_RET_CODE_NOT_FOUND		6
 
 struct qla_hw_data;
-
+struct rsp_que;
 /*
  * ISP operations
  */
@@ -2030,10 +2031,9 @@
 	void (*enable_intrs) (struct qla_hw_data *);
 	void (*disable_intrs) (struct qla_hw_data *);
 
-	int (*abort_command) (struct scsi_qla_host *, srb_t *,
-		struct req_que *);
-	int (*target_reset) (struct fc_port *, unsigned int);
-	int (*lun_reset) (struct fc_port *, unsigned int);
+	int (*abort_command) (srb_t *);
+	int (*target_reset) (struct fc_port *, unsigned int, int);
+	int (*lun_reset) (struct fc_port *, unsigned int, int);
 	int (*fabric_login) (struct scsi_qla_host *, uint16_t, uint8_t,
 		uint8_t, uint8_t, uint16_t *, uint8_t);
 	int (*fabric_logout) (struct scsi_qla_host *, uint16_t, uint8_t,
@@ -2079,7 +2079,6 @@
 #define QLA_PCI_MSIX_CONTROL	0xa2
 
 struct scsi_qla_host;
-struct rsp_que;
 
 struct qla_msix_entry {
 	int have_irq;
@@ -2140,7 +2139,6 @@
 #define MBC_INITIALIZE_MULTIQ 0x1f
 #define QLA_QUE_PAGE 0X1000
 #define QLA_MQ_SIZE 32
-#define QLA_MAX_HOST_QUES 16
 #define QLA_MAX_QUEUES 256
 #define ISP_QUE_REG(ha, id) \
 	((ha->mqenable) ? \
@@ -2170,6 +2168,8 @@
 	struct qla_hw_data *hw;
 	struct qla_msix_entry *msix;
 	struct req_que *req;
+	srb_t *status_srb; /* status continuation entry */
+	struct work_struct q_work;
 };
 
 /* Request queue data structure */
@@ -2222,6 +2222,8 @@
 		uint32_t	fce_enabled		:1;
 		uint32_t	fac_supported		:1;
 		uint32_t	chip_reset_done		:1;
+		uint32_t	port0			:1;
+		uint32_t	running_gold_fw		:1;
 	} flags;
 
 	/* This spinlock is used to protect "io transactions", you must
@@ -2246,7 +2248,8 @@
 	struct rsp_que **rsp_q_map;
 	unsigned long req_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
 	unsigned long rsp_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
-	uint16_t 	max_queues;
+	uint8_t 	max_req_queues;
+	uint8_t 	max_rsp_queues;
 	struct qla_npiv_entry *npiv_info;
 	uint16_t	nvram_npiv_size;
 
@@ -2255,6 +2258,9 @@
 #define FLOGI_MID_SUPPORT       BIT_10
 #define FLOGI_VSAN_SUPPORT      BIT_12
 #define FLOGI_SP_SUPPORT        BIT_13
+
+	uint8_t		port_no;		/* Physical port of adapter */
+
 	/* Timeout timers. */
 	uint8_t 	loop_down_abort_time;    /* port down timer */
 	atomic_t	loop_down_timer;         /* loop down timer */
@@ -2392,6 +2398,14 @@
 	dma_addr_t	edc_data_dma;
 	uint16_t	edc_data_len;
 
+#define XGMAC_DATA_SIZE	PAGE_SIZE
+	void		*xgmac_data;
+	dma_addr_t	xgmac_data_dma;
+
+#define DCBX_TLV_DATA_SIZE PAGE_SIZE
+	void		*dcbx_tlv;
+	dma_addr_t	dcbx_tlv_dma;
+
 	struct task_struct	*dpc_thread;
 	uint8_t dpc_active;                  /* DPC routine is active */
 
@@ -2510,6 +2524,7 @@
 	uint32_t        flt_region_vpd;
 	uint32_t        flt_region_nvram;
 	uint32_t        flt_region_npiv_conf;
+	uint32_t	flt_region_gold_fw;
 
 	/* Needed for BEACON */
 	uint16_t        beacon_blink_led;
@@ -2536,6 +2551,7 @@
 	struct qla_chip_state_84xx *cs84xx;
 	struct qla_statistics qla_stats;
 	struct isp_operations *isp_ops;
+	struct workqueue_struct *wq;
 };
 
 /*
@@ -2545,6 +2561,8 @@
 	struct list_head list;
 	struct list_head vp_fcports;	/* list of fcports */
 	struct list_head work_list;
+	spinlock_t work_lock;
+
 	/* Commonly used flags and state information. */
 	struct Scsi_Host *host;
 	unsigned long	host_no;
@@ -2591,8 +2609,6 @@
 #define SWITCH_FOUND		BIT_0
 #define DFLG_NO_CABLE		BIT_1
 
-	srb_t		*status_srb;	/* Status continuation entry. */
-
 	/* ISP configuration data. */
 	uint16_t	loop_id;		/* Host adapter loop id */
 
@@ -2618,6 +2634,11 @@
 	uint8_t		node_name[WWN_SIZE];
 	uint8_t		port_name[WWN_SIZE];
 	uint8_t		fabric_node_name[WWN_SIZE];
+
+	uint16_t	fcoe_vlan_id;
+	uint16_t	fcoe_fcf_idx;
+	uint8_t		fcoe_vn_port_mac[6];
+
 	uint32_t   	vp_abort_cnt;
 
 	struct fc_vport	*fc_vport;	/* holds fc_vport * for each vport */
@@ -2643,7 +2664,7 @@
 #define VP_ERR_FAB_LOGOUT	4
 #define VP_ERR_ADAP_NORESOURCES	5
 	struct qla_hw_data *hw;
-	int	req_ques[QLA_MAX_HOST_QUES];
+	struct req_que *req;
 } scsi_qla_host_t;
 
 /*
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 96ccb96..dfde2dd 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -878,7 +878,6 @@
 					/* HCCR statuses. */
 #define HCCRX_HOST_INT		BIT_6	/* Host to RISC interrupt bit. */
 #define HCCRX_RISC_RESET	BIT_5	/* RISC Reset mode bit. */
-#define HCCRX_RISC_PAUSE	BIT_4	/* RISC Pause mode bit. */
 					/* HCCR commands. */
 					/* NOOP. */
 #define HCCRX_NOOP		0x00000000
@@ -1241,6 +1240,7 @@
 #define FLT_REG_HW_EVENT_1	0x1f
 #define FLT_REG_NPIV_CONF_0	0x29
 #define FLT_REG_NPIV_CONF_1	0x2a
+#define FLT_REG_GOLD_FW		0x2f
 
 struct qla_flt_region {
 	uint32_t code;
@@ -1405,6 +1405,8 @@
 #define MBC_IDC_ACK		0x101
 #define MBC_RESTART_MPI_FW	0x3d
 #define MBC_FLASH_ACCESS_CTRL	0x3e	/* Control flash access. */
+#define MBC_GET_XGMAC_STATS	0x7a
+#define MBC_GET_DCBX_PARAMS	0x51
 
 /* Flash access control option field bit definitions */
 #define FAC_OPT_FORCE_SEMAPHORE		BIT_15
@@ -1711,7 +1713,7 @@
 #define FA_VPD0_ADDR_81		0xD0000
 #define FA_VPD1_ADDR_81		0xD0400
 #define FA_NVRAM0_ADDR_81	0xD0080
-#define FA_NVRAM1_ADDR_81	0xD0480
+#define FA_NVRAM1_ADDR_81	0xD0180
 #define FA_FEATURE_ADDR_81	0xD4000
 #define FA_FLASH_DESCR_ADDR_81	0xD8000
 #define FA_FLASH_LAYOUT_ADDR_81	0xD8400
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 528913f..65b12d8 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -65,8 +65,11 @@
 extern int ql2xallocfwdump;
 extern int ql2xextended_error_logging;
 extern int ql2xqfullrampup;
+extern int ql2xqfulltracking;
 extern int ql2xiidmaenable;
 extern int ql2xmaxqueues;
+extern int ql2xmultique_tag;
+extern int ql2xfwloadbin;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -145,7 +148,7 @@
 extern int
 qla2x00_execute_fw(scsi_qla_host_t *, uint32_t);
 
-extern void
+extern int
 qla2x00_get_fw_version(scsi_qla_host_t *, uint16_t *, uint16_t *, uint16_t *,
     uint16_t *, uint32_t *, uint8_t *, uint32_t *, uint8_t *);
 
@@ -165,13 +168,13 @@
 qla2x00_issue_iocb(scsi_qla_host_t *, void *, dma_addr_t, size_t);
 
 extern int
-qla2x00_abort_command(scsi_qla_host_t *, srb_t *, struct req_que *);
+qla2x00_abort_command(srb_t *);
 
 extern int
-qla2x00_abort_target(struct fc_port *, unsigned int);
+qla2x00_abort_target(struct fc_port *, unsigned int, int);
 
 extern int
-qla2x00_lun_reset(struct fc_port *, unsigned int);
+qla2x00_lun_reset(struct fc_port *, unsigned int, int);
 
 extern int
 qla2x00_get_adapter_id(scsi_qla_host_t *, uint16_t *, uint8_t *, uint8_t *,
@@ -236,9 +239,11 @@
 qla24xx_get_isp_stats(scsi_qla_host_t *, struct link_statistics *,
     dma_addr_t);
 
-extern int qla24xx_abort_command(scsi_qla_host_t *, srb_t *, struct req_que *);
-extern int qla24xx_abort_target(struct fc_port *, unsigned int);
-extern int qla24xx_lun_reset(struct fc_port *, unsigned int);
+extern int qla24xx_abort_command(srb_t *);
+extern int
+qla24xx_abort_target(struct fc_port *, unsigned int, int);
+extern int
+qla24xx_lun_reset(struct fc_port *, unsigned int, int);
 
 extern int
 qla2x00_system_error(scsi_qla_host_t *);
@@ -288,6 +293,18 @@
 extern int
 qla81xx_fac_erase_sector(scsi_qla_host_t *, uint32_t, uint32_t);
 
+extern int
+qla2x00_get_xgmac_stats(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t *);
+
+extern int
+qla2x00_get_dcbx_params(scsi_qla_host_t *, dma_addr_t, uint16_t);
+
+extern int
+qla2x00_read_ram_word(scsi_qla_host_t *, uint32_t, uint32_t *);
+
+extern int
+qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
+
 /*
  * Global Function Prototypes in qla_isr.c source file.
  */
@@ -295,8 +312,8 @@
 extern irqreturn_t qla2300_intr_handler(int, void *);
 extern irqreturn_t qla24xx_intr_handler(int, void *);
 extern void qla2x00_process_response_queue(struct rsp_que *);
-extern void qla24xx_process_response_queue(struct rsp_que *);
-
+extern void
+qla24xx_process_response_queue(struct scsi_qla_host *, struct rsp_que *);
 extern int qla2x00_request_irqs(struct qla_hw_data *, struct rsp_que *);
 extern void qla2x00_free_irqs(scsi_qla_host_t *);
 
@@ -401,19 +418,21 @@
 extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *);
 extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *);
 extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t,
-	uint16_t, uint8_t, uint8_t);
+	uint16_t, int, uint8_t);
 extern int qla25xx_create_rsp_que(struct qla_hw_data *, uint16_t, uint8_t,
-	uint16_t);
+	uint16_t, int);
 extern int qla25xx_update_req_que(struct scsi_qla_host *, uint8_t, uint8_t);
 extern void qla2x00_init_response_q_entries(struct rsp_que *);
 extern int qla25xx_delete_req_que(struct scsi_qla_host *, struct req_que *);
 extern int qla25xx_delete_rsp_que(struct scsi_qla_host *, struct rsp_que *);
 extern int qla25xx_create_queues(struct scsi_qla_host *, uint8_t);
-extern int qla25xx_delete_queues(struct scsi_qla_host *, uint8_t);
+extern int qla25xx_delete_queues(struct scsi_qla_host *);
 extern uint16_t qla24xx_rd_req_reg(struct qla_hw_data *, uint16_t);
 extern uint16_t qla25xx_rd_req_reg(struct qla_hw_data *, uint16_t);
 extern void qla24xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
 extern void qla25xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
 extern void qla25xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
 extern void qla24xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
+extern struct scsi_qla_host * qla25xx_get_host(struct rsp_que *);
+
 #endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 557f58d..917534b 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1107,7 +1107,7 @@
 		return ret;
 
 	ha->isp_ops->fabric_login(vha, vha->mgmt_svr_loop_id, 0xff, 0xff, 0xfa,
-	    mb, BIT_1);
+	    mb, BIT_1|BIT_0);
 	if (mb[0] != MBS_COMMAND_COMPLETE) {
 		DEBUG2_13(printk("%s(%ld): Failed MANAGEMENT_SERVER login: "
 		    "loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x mb[6]=%x mb[7]=%x\n",
@@ -1879,6 +1879,9 @@
 			case BIT_13:
 				list[i].fp_speed = PORT_SPEED_4GB;
 				break;
+			case BIT_12:
+				list[i].fp_speed = PORT_SPEED_10GB;
+				break;
 			case BIT_11:
 				list[i].fp_speed = PORT_SPEED_8GB;
 				break;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index bd7dd84..2620261 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -634,7 +634,7 @@
 		goto chip_diag_failed;
 
 	DEBUG3(printk("scsi(%ld): Reset register cleared by chip reset\n",
-	    ha->host_no));
+	    vha->host_no));
 
 	/* Reset RISC processor. */
 	WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
@@ -655,7 +655,7 @@
 		goto chip_diag_failed;
 
 	/* Check product ID of chip */
-	DEBUG3(printk("scsi(%ld): Checking product ID of chip\n", ha->host_no));
+	DEBUG3(printk("scsi(%ld): Checking product ID of chip\n", vha->host_no));
 
 	mb[1] = RD_MAILBOX_REG(ha, reg, 1);
 	mb[2] = RD_MAILBOX_REG(ha, reg, 2);
@@ -730,9 +730,6 @@
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = ha->req_q_map[0];
 
-	/* Perform RISC reset. */
-	qla24xx_reset_risc(vha);
-
 	ha->fw_transfer_size = REQUEST_ENTRY_SIZE * req->length;
 
 	rval = qla2x00_mbx_reg_test(vha);
@@ -786,7 +783,6 @@
 		    sizeof(uint32_t);
 		if (ha->mqenable)
 			mq_size = sizeof(struct qla2xxx_mq_chain);
-
 		/* Allocate memory for Fibre Channel Event Buffer. */
 		if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha))
 			goto try_eft;
@@ -850,8 +846,7 @@
 	rsp_q_size = rsp->length * sizeof(response_t);
 
 	dump_size = offsetof(struct qla2xxx_fw_dump, isp);
-	dump_size += fixed_size + mem_size + req_q_size + rsp_q_size +
-	    eft_size;
+	dump_size += fixed_size + mem_size + req_q_size + rsp_q_size + eft_size;
 	ha->chain_offset = dump_size;
 	dump_size += mq_size + fce_size;
 
@@ -891,6 +886,56 @@
 	    htonl(offsetof(struct qla2xxx_fw_dump, isp));
 }
 
+static int
+qla81xx_mpi_sync(scsi_qla_host_t *vha)
+{
+#define MPS_MASK	0xe0
+	int rval;
+	uint16_t dc;
+	uint32_t dw;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_QLA81XX(vha->hw))
+		return QLA_SUCCESS;
+
+	rval = qla2x00_write_ram_word(vha, 0x7c00, 1);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "Sync-MPI: Unable to acquire semaphore.\n"));
+		goto done;
+	}
+
+	pci_read_config_word(vha->hw->pdev, 0x54, &dc);
+	rval = qla2x00_read_ram_word(vha, 0x7a15, &dw);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "Sync-MPI: Unable to read sync.\n"));
+		goto done_release;
+	}
+
+	dc &= MPS_MASK;
+	if (dc == (dw & MPS_MASK))
+		goto done_release;
+
+	dw &= ~MPS_MASK;
+	dw |= dc;
+	rval = qla2x00_write_ram_word(vha, 0x7a15, dw);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "Sync-MPI: Unable to gain sync.\n"));
+	}
+
+done_release:
+	rval = qla2x00_write_ram_word(vha, 0x7c00, 0);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "Sync-MPI: Unable to release semaphore.\n"));
+	}
+
+done:
+	return rval;
+}
+
 /**
  * qla2x00_setup_chip() - Load and start RISC firmware.
  * @ha: HA context
@@ -915,6 +960,8 @@
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	}
 
+	qla81xx_mpi_sync(vha);
+
 	/* Load firmware sequences */
 	rval = ha->isp_ops->load_risc(vha, &srisc_address);
 	if (rval == QLA_SUCCESS) {
@@ -931,13 +978,16 @@
 			/* Retrieve firmware information. */
 			if (rval == QLA_SUCCESS) {
 				fw_major_version = ha->fw_major_version;
-				qla2x00_get_fw_version(vha,
+				rval = qla2x00_get_fw_version(vha,
 				    &ha->fw_major_version,
 				    &ha->fw_minor_version,
 				    &ha->fw_subminor_version,
 				    &ha->fw_attributes, &ha->fw_memory_size,
 				    ha->mpi_version, &ha->mpi_capabilities,
 				    ha->phy_version);
+				if (rval != QLA_SUCCESS)
+					goto failed;
+
 				ha->flags.npiv_supported = 0;
 				if (IS_QLA2XXX_MIDTYPE(ha) &&
 					 (ha->fw_attributes & BIT_2)) {
@@ -989,7 +1039,7 @@
 			    ha->fw_subminor_version);
 		}
 	}
-
+failed:
 	if (rval) {
 		DEBUG2_3(printk("scsi(%ld): Setup chip **** FAILED ****.\n",
 		    vha->host_no));
@@ -1013,12 +1063,14 @@
 	uint16_t cnt;
 	response_t *pkt;
 
+	rsp->ring_ptr = rsp->ring;
+	rsp->ring_index    = 0;
+	rsp->status_srb = NULL;
 	pkt = rsp->ring_ptr;
 	for (cnt = 0; cnt < rsp->length; cnt++) {
 		pkt->signature = RESPONSE_PROCESSED;
 		pkt++;
 	}
-
 }
 
 /**
@@ -1176,7 +1228,7 @@
 		if (ha->flags.msix_enabled) {
 			msix = &ha->msix_entries[1];
 			DEBUG2_17(printk(KERN_INFO
-			"Reistering vector 0x%x for base que\n", msix->entry));
+			"Registering vector 0x%x for base que\n", msix->entry));
 			icb->msix = cpu_to_le16(msix->entry);
 		}
 		/* Use alternate PCI bus number */
@@ -1230,14 +1282,14 @@
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
 	/* Clear outstanding commands array. */
-	for (que = 0; que < ha->max_queues; que++) {
+	for (que = 0; que < ha->max_req_queues; que++) {
 		req = ha->req_q_map[que];
 		if (!req)
 			continue;
-		for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+		for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
 			req->outstanding_cmds[cnt] = NULL;
 
-		req->current_outstanding_cmd = 0;
+		req->current_outstanding_cmd = 1;
 
 		/* Initialize firmware. */
 		req->ring_ptr  = req->ring;
@@ -1245,13 +1297,10 @@
 		req->cnt      = req->length;
 	}
 
-	for (que = 0; que < ha->max_queues; que++) {
+	for (que = 0; que < ha->max_rsp_queues; que++) {
 		rsp = ha->rsp_q_map[que];
 		if (!rsp)
 			continue;
-		rsp->ring_ptr = rsp->ring;
-		rsp->ring_index    = 0;
-
 		/* Initialize response queue entries */
 		qla2x00_init_response_q_entries(rsp);
 	}
@@ -1307,7 +1356,7 @@
 	unsigned long	wtime, mtime, cs84xx_time;
 	uint16_t	min_wait;	/* Minimum wait time if loop is down */
 	uint16_t	wait_time;	/* Wait time if loop is coming ready */
-	uint16_t	state[3];
+	uint16_t	state[5];
 	struct qla_hw_data *ha = vha->hw;
 
 	rval = QLA_SUCCESS;
@@ -1406,8 +1455,9 @@
 		    vha->host_no, state[0], jiffies));
 	} while (1);
 
-	DEBUG(printk("scsi(%ld): fw_state=%x curr time=%lx.\n",
-	    vha->host_no, state[0], jiffies));
+	DEBUG(printk("scsi(%ld): fw_state=%x (%x, %x, %x, %x) curr time=%lx.\n",
+	    vha->host_no, state[0], state[1], state[2], state[3], state[4],
+	    jiffies));
 
 	if (rval) {
 		DEBUG2_3(printk("scsi(%ld): Firmware ready **** FAILED ****.\n",
@@ -1541,6 +1591,7 @@
 	char *st, *en;
 	uint16_t index;
 	struct qla_hw_data *ha = vha->hw;
+	int use_tbl = !IS_QLA25XX(ha) && !IS_QLA81XX(ha);
 
 	if (memcmp(model, BINZERO, len) != 0) {
 		strncpy(ha->model_number, model, len);
@@ -1553,14 +1604,16 @@
 		}
 
 		index = (ha->pdev->subsystem_device & 0xff);
-		if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+		if (use_tbl &&
+		    ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
 		    index < QLA_MODEL_NAMES)
 			strncpy(ha->model_desc,
 			    qla2x00_model_name[index * 2 + 1],
 			    sizeof(ha->model_desc) - 1);
 	} else {
 		index = (ha->pdev->subsystem_device & 0xff);
-		if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+		if (use_tbl &&
+		    ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
 		    index < QLA_MODEL_NAMES) {
 			strcpy(ha->model_number,
 			    qla2x00_model_name[index * 2]);
@@ -2061,8 +2114,10 @@
 	if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
 		if (test_bit(LOCAL_LOOP_UPDATE, &save_flags))
 			set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
-		if (test_bit(RSCN_UPDATE, &save_flags))
+		if (test_bit(RSCN_UPDATE, &save_flags)) {
 			set_bit(RSCN_UPDATE, &vha->dpc_flags);
+			vha->flags.rscn_queue_overflow = 1;
+		}
 	}
 
 	return (rval);
@@ -2110,7 +2165,7 @@
 		goto cleanup_allocation;
 
 	DEBUG3(printk("scsi(%ld): Entries in ID list (%d)\n",
-	    ha->host_no, entries));
+	    vha->host_no, entries));
 	DEBUG3(qla2x00_dump_buffer((uint8_t *)ha->gid_list,
 	    entries * sizeof(struct gid_list_info)));
 
@@ -2243,7 +2298,8 @@
 qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 {
 #define LS_UNKNOWN      2
-	static char *link_speeds[5] = { "1", "2", "?", "4", "8" };
+	static char *link_speeds[] = { "1", "2", "?", "4", "8", "10" };
+	char *link_speed;
 	int rval;
 	uint16_t mb[6];
 	struct qla_hw_data *ha = vha->hw;
@@ -2266,10 +2322,15 @@
 		    fcport->port_name[6], fcport->port_name[7], rval,
 		    fcport->fp_speed, mb[0], mb[1]));
 	} else {
+		link_speed = link_speeds[LS_UNKNOWN];
+		if (fcport->fp_speed < 5)
+			link_speed = link_speeds[fcport->fp_speed];
+		else if (fcport->fp_speed == 0x13)
+			link_speed = link_speeds[5];
 		DEBUG2(qla_printk(KERN_INFO, ha,
 		    "iIDMA adjusted to %s GB/s on "
 		    "%02x%02x%02x%02x%02x%02x%02x%02x.\n",
-		    link_speeds[fcport->fp_speed], fcport->port_name[0],
+		    link_speed, fcport->port_name[0],
 		    fcport->port_name[1], fcport->port_name[2],
 		    fcport->port_name[3], fcport->port_name[4],
 		    fcport->port_name[5], fcport->port_name[6],
@@ -3180,9 +3241,14 @@
 {
 	int rval = QLA_SUCCESS;
 	uint32_t wait_time;
-	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req = ha->req_q_map[vha->req_ques[0]];
-	struct rsp_que *rsp = req->rsp;
+	struct req_que *req;
+	struct rsp_que *rsp;
+
+	if (ql2xmultique_tag)
+		req = vha->hw->req_q_map[0];
+	else
+		req = vha->req;
+	rsp = req->rsp;
 
 	atomic_set(&vha->loop_state, LOOP_UPDATE);
 	clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
@@ -3448,7 +3514,7 @@
 	int ret = -1;
 	int i;
 
-	for (i = 1; i < ha->max_queues; i++) {
+	for (i = 1; i < ha->max_rsp_queues; i++) {
 		rsp = ha->rsp_q_map[i];
 		if (rsp) {
 			rsp->options &= ~BIT_0;
@@ -3462,6 +3528,8 @@
 					"%s Rsp que:%d inited\n", __func__,
 						rsp->id));
 		}
+	}
+	for (i = 1; i < ha->max_req_queues; i++) {
 		req = ha->req_q_map[i];
 		if (req) {
 		/* Clear outstanding commands array. */
@@ -3566,14 +3634,15 @@
 	nv = ha->nvram;
 
 	/* Determine NVRAM starting address. */
-	ha->nvram_size = sizeof(struct nvram_24xx);
-	ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
-	ha->vpd_size = FA_NVRAM_VPD_SIZE;
-	ha->vpd_base = FA_NVRAM_VPD0_ADDR;
-	if (PCI_FUNC(ha->pdev->devfn)) {
+	if (ha->flags.port0) {
+		ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
+		ha->vpd_base = FA_NVRAM_VPD0_ADDR;
+	} else {
 		ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
 		ha->vpd_base = FA_NVRAM_VPD1_ADDR;
 	}
+	ha->nvram_size = sizeof(struct nvram_24xx);
+	ha->vpd_size = FA_NVRAM_VPD_SIZE;
 
 	/* Get VPD data into cache */
 	ha->vpd = ha->nvram + VPD_OFFSET;
@@ -3587,7 +3656,7 @@
 	for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
 		chksum += le32_to_cpu(*dptr++);
 
-	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", vha->host_no));
 	DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
 
 	/* Bad NVRAM data, set defaults parameters. */
@@ -3612,7 +3681,7 @@
 		nv->exchange_count = __constant_cpu_to_le16(0);
 		nv->hard_address = __constant_cpu_to_le16(124);
 		nv->port_name[0] = 0x21;
-		nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+		nv->port_name[1] = 0x00 + ha->port_no;
 		nv->port_name[2] = 0x00;
 		nv->port_name[3] = 0xe0;
 		nv->port_name[4] = 0x8b;
@@ -3798,11 +3867,11 @@
 }
 
 static int
-qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
+    uint32_t faddr)
 {
 	int	rval = QLA_SUCCESS;
 	int	segments, fragment;
-	uint32_t faddr;
 	uint32_t *dcode, dlen;
 	uint32_t risc_addr;
 	uint32_t risc_size;
@@ -3811,12 +3880,11 @@
 	struct req_que *req = ha->req_q_map[0];
 
 	qla_printk(KERN_INFO, ha,
-	    "FW: Loading from flash (%x)...\n", ha->flt_region_fw);
+	    "FW: Loading from flash (%x)...\n", faddr);
 
 	rval = QLA_SUCCESS;
 
 	segments = FA_RISC_CODE_SEGMENTS;
-	faddr = ha->flt_region_fw;
 	dcode = (uint32_t *)req->ring;
 	*srisc_addr = 0;
 
@@ -4104,6 +4172,9 @@
 {
 	int rval;
 
+	if (ql2xfwloadbin == 1)
+		return qla81xx_load_risc(vha, srisc_addr);
+
 	/*
 	 * FW Load priority:
 	 * 1) Firmware via request-firmware interface (.bin file).
@@ -4113,24 +4184,45 @@
 	if (rval == QLA_SUCCESS)
 		return rval;
 
-	return qla24xx_load_risc_flash(vha, srisc_addr);
+	return qla24xx_load_risc_flash(vha, srisc_addr,
+	    vha->hw->flt_region_fw);
 }
 
 int
 qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 {
 	int rval;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (ql2xfwloadbin == 2)
+		goto try_blob_fw;
 
 	/*
 	 * FW Load priority:
 	 * 1) Firmware residing in flash.
 	 * 2) Firmware via request-firmware interface (.bin file).
+	 * 3) Golden-Firmware residing in flash -- limited operation.
 	 */
-	rval = qla24xx_load_risc_flash(vha, srisc_addr);
+	rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_fw);
 	if (rval == QLA_SUCCESS)
 		return rval;
 
-	return qla24xx_load_risc_blob(vha, srisc_addr);
+try_blob_fw:
+	rval = qla24xx_load_risc_blob(vha, srisc_addr);
+	if (rval == QLA_SUCCESS || !ha->flt_region_gold_fw)
+		return rval;
+
+	qla_printk(KERN_ERR, ha,
+	    "FW: Attempting to fallback to golden firmware...\n");
+	rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_gold_fw);
+	if (rval != QLA_SUCCESS)
+		return rval;
+
+	qla_printk(KERN_ERR, ha,
+	    "FW: Please update operational firmware...\n");
+	ha->flags.running_gold_fw = 1;
+
+	return rval;
 }
 
 void
@@ -4146,7 +4238,7 @@
 
 	ret = qla2x00_stop_firmware(vha);
 	for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
-	    retries ; retries--) {
+	    ret != QLA_INVALID_COMMAND && retries ; retries--) {
 		ha->isp_ops->reset_chip(vha);
 		if (ha->isp_ops->chip_diag(vha) != QLA_SUCCESS)
 			continue;
@@ -4165,13 +4257,19 @@
 	uint16_t mb[MAILBOX_REGISTER_COUNT];
 	struct qla_hw_data *ha = vha->hw;
 	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
-	struct req_que *req = ha->req_q_map[vha->req_ques[0]];
-	struct rsp_que *rsp = req->rsp;
+	struct req_que *req;
+	struct rsp_que *rsp;
 
 	if (!vha->vp_idx)
 		return -EINVAL;
 
 	rval = qla2x00_fw_ready(base_vha);
+	if (ql2xmultique_tag)
+		req = ha->req_q_map[0];
+	else
+		req = vha->req;
+	rsp = req->rsp;
+
 	if (rval == QLA_SUCCESS) {
 		clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
 		qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
@@ -4305,7 +4403,7 @@
 	for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
 		chksum += le32_to_cpu(*dptr++);
 
-	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", vha->host_no));
 	DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
 
 	/* Bad NVRAM data, set defaults parameters. */
@@ -4329,7 +4427,7 @@
 		nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
 		nv->exchange_count = __constant_cpu_to_le16(0);
 		nv->port_name[0] = 0x21;
-		nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+		nv->port_name[1] = 0x00 + ha->port_no;
 		nv->port_name[2] = 0x00;
 		nv->port_name[3] = 0xe0;
 		nv->port_name[4] = 0x8b;
@@ -4358,12 +4456,12 @@
 		nv->max_luns_per_target = __constant_cpu_to_le16(128);
 		nv->port_down_retry_count = __constant_cpu_to_le16(30);
 		nv->link_down_timeout = __constant_cpu_to_le16(30);
-		nv->enode_mac[0] = 0x01;
+		nv->enode_mac[0] = 0x00;
 		nv->enode_mac[1] = 0x02;
 		nv->enode_mac[2] = 0x03;
 		nv->enode_mac[3] = 0x04;
 		nv->enode_mac[4] = 0x05;
-		nv->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+		nv->enode_mac[5] = 0x06 + ha->port_no;
 
 		rval = 1;
 	}
@@ -4396,7 +4494,7 @@
 		icb->enode_mac[2] = 0x03;
 		icb->enode_mac[3] = 0x04;
 		icb->enode_mac[4] = 0x05;
-		icb->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+		icb->enode_mac[5] = 0x06 + ha->port_no;
 	}
 
 	/* Use extended-initialization control block. */
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index a8abbb9..13396be 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -15,6 +15,7 @@
 							struct rsp_que *rsp);
 static void qla2x00_isp_cmd(struct scsi_qla_host *, struct req_que *);
 
+static void qla25xx_set_que(srb_t *, struct rsp_que **);
 /**
  * qla2x00_get_cmd_direction() - Determine control_flag data direction.
  * @cmd: SCSI command
@@ -92,9 +93,10 @@
  * Returns a pointer to the Continuation Type 0 IOCB packet.
  */
 static inline cont_entry_t *
-qla2x00_prep_cont_type0_iocb(struct req_que *req, struct scsi_qla_host *vha)
+qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha)
 {
 	cont_entry_t *cont_pkt;
+	struct req_que *req = vha->req;
 	/* Adjust ring index. */
 	req->ring_index++;
 	if (req->ring_index == req->length) {
@@ -120,10 +122,11 @@
  * Returns a pointer to the continuation type 1 IOCB packet.
  */
 static inline cont_a64_entry_t *
-qla2x00_prep_cont_type1_iocb(struct req_que *req, scsi_qla_host_t *vha)
+qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha)
 {
 	cont_a64_entry_t *cont_pkt;
 
+	struct req_que *req = vha->req;
 	/* Adjust ring index. */
 	req->ring_index++;
 	if (req->ring_index == req->length) {
@@ -159,7 +162,6 @@
 	struct scsi_cmnd *cmd;
 	struct scatterlist *sg;
 	int i;
-	struct req_que *req;
 
 	cmd = sp->cmd;
 
@@ -174,8 +176,6 @@
 	}
 
 	vha = sp->fcport->vha;
-	req = sp->que;
-
 	cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
 
 	/* Three DSDs are available in the Command Type 2 IOCB */
@@ -192,7 +192,7 @@
 			 * Seven DSDs are available in the Continuation
 			 * Type 0 IOCB.
 			 */
-			cont_pkt = qla2x00_prep_cont_type0_iocb(req, vha);
+			cont_pkt = qla2x00_prep_cont_type0_iocb(vha);
 			cur_dsd = (uint32_t *)&cont_pkt->dseg_0_address;
 			avail_dsds = 7;
 		}
@@ -220,7 +220,6 @@
 	struct scsi_cmnd *cmd;
 	struct scatterlist *sg;
 	int i;
-	struct req_que *req;
 
 	cmd = sp->cmd;
 
@@ -235,8 +234,6 @@
 	}
 
 	vha = sp->fcport->vha;
-	req = sp->que;
-
 	cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
 
 	/* Two DSDs are available in the Command Type 3 IOCB */
@@ -254,7 +251,7 @@
 			 * Five DSDs are available in the Continuation
 			 * Type 1 IOCB.
 			 */
-			cont_pkt = qla2x00_prep_cont_type1_iocb(req, vha);
+			cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
 			cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
 			avail_dsds = 5;
 		}
@@ -353,7 +350,6 @@
 	/* Build command packet */
 	req->current_outstanding_cmd = handle;
 	req->outstanding_cmds[handle] = sp;
-	sp->que = req;
 	sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
 	req->cnt -= req_cnt;
 
@@ -453,6 +449,7 @@
 			mrk24->lun[2] = MSB(lun);
 			host_to_fcp_swap(mrk24->lun, sizeof(mrk24->lun));
 			mrk24->vp_index = vha->vp_idx;
+			mrk24->handle = MAKE_HANDLE(req->id, mrk24->handle);
 		} else {
 			SET_TARGET_ID(ha, mrk->target, loop_id);
 			mrk->lun = cpu_to_le16(lun);
@@ -531,9 +528,6 @@
 			for (cnt = 0; cnt < REQUEST_ENTRY_SIZE / 4; cnt++)
 				*dword_ptr++ = 0;
 
-			/* Set system defined field. */
-			pkt->sys_define = (uint8_t)req->ring_index;
-
 			/* Set entry count. */
 			pkt->entry_count = 1;
 
@@ -656,7 +650,7 @@
 	}
 
 	vha = sp->fcport->vha;
-	req = sp->que;
+	req = vha->req;
 
 	/* Set transfer direction */
 	if (cmd->sc_data_direction == DMA_TO_DEVICE) {
@@ -687,7 +681,7 @@
 			 * Five DSDs are available in the Continuation
 			 * Type 1 IOCB.
 			 */
-			cont_pkt = qla2x00_prep_cont_type1_iocb(req, vha);
+			cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
 			cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
 			avail_dsds = 5;
 		}
@@ -724,19 +718,13 @@
 	struct scsi_cmnd *cmd = sp->cmd;
 	struct scsi_qla_host *vha = sp->fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
-	uint16_t que_id;
 
 	/* Setup device pointers. */
 	ret = 0;
-	que_id = vha->req_ques[0];
 
-	req = ha->req_q_map[que_id];
-	sp->que = req;
+	qla25xx_set_que(sp, &rsp);
+	req = vha->req;
 
-	if (req->rsp)
-		rsp = req->rsp;
-	else
-		rsp = ha->rsp_q_map[que_id];
 	/* So we know we haven't pci_map'ed anything yet */
 	tot_dsds = 0;
 
@@ -794,7 +782,7 @@
 	req->cnt -= req_cnt;
 
 	cmd_pkt = (struct cmd_type_7 *)req->ring_ptr;
-	cmd_pkt->handle = handle;
+	cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
 
 	/* Zero out remaining portion of packet. */
 	/*    tagged queuing modifier -- default is TSK_SIMPLE (0). */
@@ -823,6 +811,8 @@
 
 	/* Set total data segment count. */
 	cmd_pkt->entry_count = (uint8_t)req_cnt;
+	/* Specify response queue number where completion should happen */
+	cmd_pkt->entry_status = (uint8_t) rsp->id;
 	wmb();
 
 	/* Adjust ring index. */
@@ -842,7 +832,7 @@
 	/* Manage unprocessed RIO/ZIO commands in response queue. */
 	if (vha->flags.process_response_queue &&
 		rsp->ring_ptr->signature != RESPONSE_PROCESSED)
-		qla24xx_process_response_queue(rsp);
+		qla24xx_process_response_queue(vha, rsp);
 
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	return QLA_SUCCESS;
@@ -855,3 +845,16 @@
 
 	return QLA_FUNCTION_FAILED;
 }
+
+static void qla25xx_set_que(srb_t *sp, struct rsp_que **rsp)
+{
+	struct scsi_cmnd *cmd = sp->cmd;
+	struct qla_hw_data *ha = sp->fcport->vha->hw;
+	int affinity = cmd->request->cpu;
+
+	if (ql2xmultique_tag && affinity >= 0 &&
+		affinity < ha->max_rsp_queues - 1)
+		*rsp = ha->rsp_q_map[affinity + 1];
+	 else
+		*rsp = ha->rsp_q_map[0];
+}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d0498184..c8d0a17 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -13,10 +13,9 @@
 static void qla2x00_process_completed_request(struct scsi_qla_host *,
 	struct req_que *, uint32_t);
 static void qla2x00_status_entry(scsi_qla_host_t *, struct rsp_que *, void *);
-static void qla2x00_status_cont_entry(scsi_qla_host_t *, sts_cont_entry_t *);
+static void qla2x00_status_cont_entry(struct rsp_que *, sts_cont_entry_t *);
 static void qla2x00_error_entry(scsi_qla_host_t *, struct rsp_que *,
 	sts_entry_t *);
-static struct scsi_qla_host *qla2x00_get_rsp_host(struct rsp_que *);
 
 /**
  * qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
@@ -51,7 +50,7 @@
 	status = 0;
 
 	spin_lock(&ha->hardware_lock);
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	for (iter = 50; iter--; ) {
 		hccr = RD_REG_WORD(&reg->hccr);
 		if (hccr & HCCR_RISC_PAUSE) {
@@ -147,7 +146,7 @@
 	status = 0;
 
 	spin_lock(&ha->hardware_lock);
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	for (iter = 50; iter--; ) {
 		stat = RD_REG_DWORD(&reg->u.isp2300.host_status);
 		if (stat & HSR_RISC_PAUSED) {
@@ -685,7 +684,7 @@
 		    vha->host_no));
 
 		if (IS_FWI2_CAPABLE(ha))
-			qla24xx_process_response_queue(rsp);
+			qla24xx_process_response_queue(vha, rsp);
 		else
 			qla2x00_process_response_queue(rsp);
 		break;
@@ -766,7 +765,10 @@
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = NULL;
 
-	req = ha->req_q_map[vha->req_ques[0]];
+	if (!ql2xqfulltracking)
+		return;
+
+	req = vha->req;
 	if (!req)
 		return;
 	if (req->max_q_depth <= sdev->queue_depth)
@@ -808,6 +810,9 @@
 	fc_port_t *fcport;
 	struct scsi_device *sdev;
 
+	if (!ql2xqfulltracking)
+		return;
+
 	sdev = sp->cmd->device;
 	if (sdev->queue_depth >= req->max_q_depth)
 		return;
@@ -858,8 +863,8 @@
 		qla2x00_ramp_up_queue_depth(vha, req, sp);
 		qla2x00_sp_compl(ha, sp);
 	} else {
-		DEBUG2(printk("scsi(%ld): Invalid ISP SCSI completion handle\n",
-		    vha->host_no));
+		DEBUG2(printk("scsi(%ld) Req:%d: Invalid ISP SCSI completion"
+			" handle(%d)\n", vha->host_no, req->id, index));
 		qla_printk(KERN_WARNING, ha,
 		    "Invalid ISP SCSI completion handle\n");
 
@@ -881,7 +886,7 @@
 	uint16_t        handle_cnt;
 	uint16_t        cnt;
 
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 
 	if (!vha->flags.online)
 		return;
@@ -926,7 +931,7 @@
 			}
 			break;
 		case STATUS_CONT_TYPE:
-			qla2x00_status_cont_entry(vha, (sts_cont_entry_t *)pkt);
+			qla2x00_status_cont_entry(rsp, (sts_cont_entry_t *)pkt);
 			break;
 		default:
 			/* Type Not Supported. */
@@ -945,7 +950,8 @@
 }
 
 static inline void
-qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
+qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len,
+	struct rsp_que *rsp)
 {
 	struct scsi_cmnd *cp = sp->cmd;
 
@@ -962,7 +968,7 @@
 	sp->request_sense_ptr += sense_len;
 	sp->request_sense_length -= sense_len;
 	if (sp->request_sense_length != 0)
-		sp->fcport->vha->status_srb = sp;
+		rsp->status_srb = sp;
 
 	DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) "
 	    "cmd=%p pid=%ld\n", __func__, sp->fcport->vha->host_no,
@@ -992,7 +998,9 @@
 	uint32_t	sense_len, rsp_info_len, resid_len, fw_resid_len;
 	uint8_t		*rsp_info, *sense_data;
 	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req = rsp->req;
+	uint32_t handle;
+	uint16_t que;
+	struct req_que *req;
 
 	sts = (sts_entry_t *) pkt;
 	sts24 = (struct sts_entry_24xx *) pkt;
@@ -1003,18 +1011,20 @@
 		comp_status = le16_to_cpu(sts->comp_status);
 		scsi_status = le16_to_cpu(sts->scsi_status) & SS_MASK;
 	}
-
+	handle = (uint32_t) LSW(sts->handle);
+	que = MSW(sts->handle);
+	req = ha->req_q_map[que];
 	/* Fast path completion. */
 	if (comp_status == CS_COMPLETE && scsi_status == 0) {
-		qla2x00_process_completed_request(vha, req, sts->handle);
+		qla2x00_process_completed_request(vha, req, handle);
 
 		return;
 	}
 
 	/* Validate handle. */
-	if (sts->handle < MAX_OUTSTANDING_COMMANDS) {
-		sp = req->outstanding_cmds[sts->handle];
-		req->outstanding_cmds[sts->handle] = NULL;
+	if (handle < MAX_OUTSTANDING_COMMANDS) {
+		sp = req->outstanding_cmds[handle];
+		req->outstanding_cmds[handle] = NULL;
 	} else
 		sp = NULL;
 
@@ -1030,7 +1040,7 @@
 	cp = sp->cmd;
 	if (cp == NULL) {
 		DEBUG2(printk("scsi(%ld): Command already returned back to OS "
-		    "pkt->handle=%d sp=%p.\n", vha->host_no, sts->handle, sp));
+		    "pkt->handle=%d sp=%p.\n", vha->host_no, handle, sp));
 		qla_printk(KERN_WARNING, ha,
 		    "Command is NULL: already returned to OS (sp=%p)\n", sp);
 
@@ -1121,6 +1131,8 @@
 			    scsi_status));
 
 			/* Adjust queue depth for all luns on the port. */
+			if (!ql2xqfulltracking)
+				break;
 			fcport->last_queue_full = jiffies;
 			starget_for_each_device(cp->device->sdev_target,
 			    fcport, qla2x00_adjust_sdev_qdepth_down);
@@ -1133,7 +1145,7 @@
 		if (!(scsi_status & SS_SENSE_LEN_VALID))
 			break;
 
-		qla2x00_handle_sense(sp, sense_data, sense_len);
+		qla2x00_handle_sense(sp, sense_data, sense_len, rsp);
 		break;
 
 	case CS_DATA_UNDERRUN:
@@ -1179,6 +1191,8 @@
 				 * Adjust queue depth for all luns on the
 				 * port.
 				 */
+				if (!ql2xqfulltracking)
+					break;
 				fcport->last_queue_full = jiffies;
 				starget_for_each_device(
 				    cp->device->sdev_target, fcport,
@@ -1192,12 +1206,12 @@
 			if (!(scsi_status & SS_SENSE_LEN_VALID))
 				break;
 
-			qla2x00_handle_sense(sp, sense_data, sense_len);
+			qla2x00_handle_sense(sp, sense_data, sense_len, rsp);
 		} else {
 			/*
 			 * If RISC reports underrun and target does not report
 			 * it then we must have a lost frame, so tell upper
-			 * layer to retry it by reporting a bus busy.
+			 * layer to retry it by reporting an error.
 			 */
 			if (!(scsi_status & SS_RESIDUAL_UNDER)) {
 				DEBUG2(printk("scsi(%ld:%d:%d:%d) Dropped "
@@ -1207,7 +1221,7 @@
 					cp->device->id, cp->device->lun, resid,
 					scsi_bufflen(cp)));
 
-				cp->result = DID_BUS_BUSY << 16;
+				cp->result = DID_ERROR << 16;
 				break;
 			}
 
@@ -1334,7 +1348,7 @@
 	}
 
 	/* Place command on done queue. */
-	if (vha->status_srb == NULL)
+	if (rsp->status_srb == NULL)
 		qla2x00_sp_compl(ha, sp);
 }
 
@@ -1346,11 +1360,11 @@
  * Extended sense data.
  */
 static void
-qla2x00_status_cont_entry(scsi_qla_host_t *vha, sts_cont_entry_t *pkt)
+qla2x00_status_cont_entry(struct rsp_que *rsp, sts_cont_entry_t *pkt)
 {
 	uint8_t		sense_sz = 0;
-	struct qla_hw_data *ha = vha->hw;
-	srb_t		*sp = vha->status_srb;
+	struct qla_hw_data *ha = rsp->hw;
+	srb_t		*sp = rsp->status_srb;
 	struct scsi_cmnd *cp;
 
 	if (sp != NULL && sp->request_sense_length != 0) {
@@ -1362,7 +1376,7 @@
 			    "cmd is NULL: already returned to OS (sp=%p)\n",
 			    sp);
 
-			vha->status_srb = NULL;
+			rsp->status_srb = NULL;
 			return;
 		}
 
@@ -1383,7 +1397,7 @@
 
 		/* Place command on done queue. */
 		if (sp->request_sense_length == 0) {
-			vha->status_srb = NULL;
+			rsp->status_srb = NULL;
 			qla2x00_sp_compl(ha, sp);
 		}
 	}
@@ -1399,7 +1413,9 @@
 {
 	srb_t *sp;
 	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req = rsp->req;
+	uint32_t handle = LSW(pkt->handle);
+	uint16_t que = MSW(pkt->handle);
+	struct req_que *req = ha->req_q_map[que];
 #if defined(QL_DEBUG_LEVEL_2)
 	if (pkt->entry_status & RF_INV_E_ORDER)
 		qla_printk(KERN_ERR, ha, "%s: Invalid Entry Order\n", __func__);
@@ -1417,14 +1433,14 @@
 #endif
 
 	/* Validate handle. */
-	if (pkt->handle < MAX_OUTSTANDING_COMMANDS)
-		sp = req->outstanding_cmds[pkt->handle];
+	if (handle < MAX_OUTSTANDING_COMMANDS)
+		sp = req->outstanding_cmds[handle];
 	else
 		sp = NULL;
 
 	if (sp) {
 		/* Free outstanding command slot. */
-		req->outstanding_cmds[pkt->handle] = NULL;
+		req->outstanding_cmds[handle] = NULL;
 
 		/* Bad payload or header */
 		if (pkt->entry_status &
@@ -1486,13 +1502,10 @@
  * qla24xx_process_response_queue() - Process response queue entries.
  * @ha: SCSI driver HA context
  */
-void
-qla24xx_process_response_queue(struct rsp_que *rsp)
+void qla24xx_process_response_queue(struct scsi_qla_host *vha,
+	struct rsp_que *rsp)
 {
 	struct sts_entry_24xx *pkt;
-	struct scsi_qla_host *vha;
-
-	vha = qla2x00_get_rsp_host(rsp);
 
 	if (!vha->flags.online)
 		return;
@@ -1523,7 +1536,7 @@
 			qla2x00_status_entry(vha, rsp, pkt);
 			break;
 		case STATUS_CONT_TYPE:
-			qla2x00_status_cont_entry(vha, (sts_cont_entry_t *)pkt);
+			qla2x00_status_cont_entry(rsp, (sts_cont_entry_t *)pkt);
 			break;
 		case VP_RPT_ID_IOCB_TYPE:
 			qla24xx_report_id_acquisition(vha,
@@ -1626,7 +1639,7 @@
 	status = 0;
 
 	spin_lock(&ha->hardware_lock);
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	for (iter = 50; iter--; ) {
 		stat = RD_REG_DWORD(&reg->host_status);
 		if (stat & HSRX_RISC_PAUSED) {
@@ -1664,7 +1677,7 @@
 			break;
 		case 0x13:
 		case 0x14:
-			qla24xx_process_response_queue(rsp);
+			qla24xx_process_response_queue(vha, rsp);
 			break;
 		default:
 			DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
@@ -1692,6 +1705,7 @@
 	struct qla_hw_data *ha;
 	struct rsp_que *rsp;
 	struct device_reg_24xx __iomem *reg;
+	struct scsi_qla_host *vha;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -1704,7 +1718,8 @@
 
 	spin_lock_irq(&ha->hardware_lock);
 
-	qla24xx_process_response_queue(rsp);
+	vha = qla25xx_get_host(rsp);
+	qla24xx_process_response_queue(vha, rsp);
 	WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
 
 	spin_unlock_irq(&ha->hardware_lock);
@@ -1717,7 +1732,6 @@
 {
 	struct qla_hw_data *ha;
 	struct rsp_que *rsp;
-	struct device_reg_24xx __iomem *reg;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -1726,13 +1740,8 @@
 		return IRQ_NONE;
 	}
 	ha = rsp->hw;
-	reg = &ha->iobase->isp24;
 
-	spin_lock_irq(&ha->hardware_lock);
-
-	qla24xx_process_response_queue(rsp);
-
-	spin_unlock_irq(&ha->hardware_lock);
+	queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work);
 
 	return IRQ_HANDLED;
 }
@@ -1760,7 +1769,7 @@
 	status = 0;
 
 	spin_lock_irq(&ha->hardware_lock);
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	do {
 		stat = RD_REG_DWORD(&reg->host_status);
 		if (stat & HSRX_RISC_PAUSED) {
@@ -1798,7 +1807,7 @@
 			break;
 		case 0x13:
 		case 0x14:
-			qla24xx_process_response_queue(rsp);
+			qla24xx_process_response_queue(vha, rsp);
 			break;
 		default:
 			DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
@@ -1822,31 +1831,14 @@
 /* Interrupt handling helpers. */
 
 struct qla_init_msix_entry {
-	uint16_t entry;
-	uint16_t index;
 	const char *name;
 	irq_handler_t handler;
 };
 
-static struct qla_init_msix_entry base_queue = {
-	.entry = 0,
-	.index = 0,
-	.name = "qla2xxx (default)",
-	.handler = qla24xx_msix_default,
-};
-
-static struct qla_init_msix_entry base_rsp_queue = {
-	.entry = 1,
-	.index = 1,
-	.name = "qla2xxx (rsp_q)",
-	.handler = qla24xx_msix_rsp_q,
-};
-
-static struct qla_init_msix_entry multi_rsp_queue = {
-	.entry = 1,
-	.index = 1,
-	.name = "qla2xxx (multi_q)",
-	.handler = qla25xx_msix_rsp_q,
+static struct qla_init_msix_entry msix_entries[3] = {
+	{ "qla2xxx (default)", qla24xx_msix_default },
+	{ "qla2xxx (rsp_q)", qla24xx_msix_rsp_q },
+	{ "qla2xxx (multiq)", qla25xx_msix_rsp_q },
 };
 
 static void
@@ -1873,7 +1865,6 @@
 	int i, ret;
 	struct msix_entry *entries;
 	struct qla_msix_entry *qentry;
-	struct qla_init_msix_entry *msix_queue;
 
 	entries = kzalloc(sizeof(struct msix_entry) * ha->msix_count,
 					GFP_KERNEL);
@@ -1900,7 +1891,7 @@
 				ha->msix_count, ret);
 			goto msix_out;
 		}
-		ha->max_queues = ha->msix_count - 1;
+		ha->max_rsp_queues = ha->msix_count - 1;
 	}
 	ha->msix_entries = kzalloc(sizeof(struct qla_msix_entry) *
 				ha->msix_count, GFP_KERNEL);
@@ -1918,45 +1909,27 @@
 		qentry->rsp = NULL;
 	}
 
-	/* Enable MSI-X for AENs for queue 0 */
-	qentry = &ha->msix_entries[0];
-	ret = request_irq(qentry->vector, base_queue.handler, 0,
-					base_queue.name, rsp);
-	if (ret) {
-		qla_printk(KERN_WARNING, ha,
+	/* Enable MSI-X vectors for the base queue */
+	for (i = 0; i < 2; i++) {
+		qentry = &ha->msix_entries[i];
+		ret = request_irq(qentry->vector, msix_entries[i].handler,
+					0, msix_entries[i].name, rsp);
+		if (ret) {
+			qla_printk(KERN_WARNING, ha,
 			"MSI-X: Unable to register handler -- %x/%d.\n",
 			qentry->vector, ret);
-		qla24xx_disable_msix(ha);
-		goto msix_out;
+			qla24xx_disable_msix(ha);
+			ha->mqenable = 0;
+			goto msix_out;
+		}
+		qentry->have_irq = 1;
+		qentry->rsp = rsp;
+		rsp->msix = qentry;
 	}
-	qentry->have_irq = 1;
-	qentry->rsp = rsp;
 
 	/* Enable MSI-X vector for response queue update for queue 0 */
-	if (ha->max_queues > 1 && ha->mqiobase) {
+	if (ha->mqiobase &&  (ha->max_rsp_queues > 1 || ha->max_req_queues > 1))
 		ha->mqenable = 1;
-		msix_queue = &multi_rsp_queue;
-		qla_printk(KERN_INFO, ha,
-				"MQ enabled, Number of Queue Resources: %d \n",
-				ha->max_queues);
-	} else {
-		ha->mqenable = 0;
-		msix_queue = &base_rsp_queue;
-	}
-
-	qentry = &ha->msix_entries[1];
-	ret = request_irq(qentry->vector, msix_queue->handler, 0,
-						msix_queue->name, rsp);
-	if (ret) {
-		qla_printk(KERN_WARNING, ha,
-			"MSI-X: Unable to register handler -- %x/%d.\n",
-			qentry->vector, ret);
-		qla24xx_disable_msix(ha);
-		ha->mqenable = 0;
-		goto msix_out;
-	}
-	qentry->have_irq = 1;
-	qentry->rsp = rsp;
 
 msix_out:
 	kfree(entries);
@@ -2063,35 +2036,11 @@
 	}
 }
 
-static struct scsi_qla_host *
-qla2x00_get_rsp_host(struct rsp_que *rsp)
-{
-	srb_t *sp;
-	struct qla_hw_data *ha = rsp->hw;
-	struct scsi_qla_host *vha = NULL;
-	struct sts_entry_24xx *pkt;
-	struct req_que *req;
-
-	if (rsp->id) {
-		pkt = (struct sts_entry_24xx *) rsp->ring_ptr;
-		req = rsp->req;
-		if (pkt && pkt->handle < MAX_OUTSTANDING_COMMANDS) {
-			sp = req->outstanding_cmds[pkt->handle];
-			if (sp)
-				vha = sp->fcport->vha;
-		}
-	}
-	if (!vha)
-	/* handle it in base queue */
-		vha = pci_get_drvdata(ha->pdev);
-
-	return vha;
-}
 
 int qla25xx_request_irq(struct rsp_que *rsp)
 {
 	struct qla_hw_data *ha = rsp->hw;
-	struct qla_init_msix_entry *intr = &multi_rsp_queue;
+	struct qla_init_msix_entry *intr = &msix_entries[2];
 	struct qla_msix_entry *msix = rsp->msix;
 	int ret;
 
@@ -2106,3 +2055,30 @@
 	msix->rsp = rsp;
 	return ret;
 }
+
+struct scsi_qla_host *
+qla25xx_get_host(struct rsp_que *rsp)
+{
+	srb_t *sp;
+	struct qla_hw_data *ha = rsp->hw;
+	struct scsi_qla_host *vha = NULL;
+	struct sts_entry_24xx *pkt;
+	struct req_que *req;
+	uint16_t que;
+	uint32_t handle;
+
+	pkt = (struct sts_entry_24xx *) rsp->ring_ptr;
+	que = MSW(pkt->handle);
+	handle = (uint32_t) LSW(pkt->handle);
+	req = ha->req_q_map[que];
+	if (handle < MAX_OUTSTANDING_COMMANDS) {
+		sp = req->outstanding_cmds[handle];
+		if (sp)
+			return  sp->fcport->vha;
+		else
+			goto base_que;
+	}
+base_que:
+	vha = pci_get_drvdata(ha->pdev);
+	return vha;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index e67c166..451ece0 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -408,7 +408,7 @@
  * Context:
  *	Kernel context.
  */
-void
+int
 qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor,
     uint16_t *subminor, uint16_t *attributes, uint32_t *memory, uint8_t *mpi,
     uint32_t *mpi_caps, uint8_t *phy)
@@ -427,6 +427,8 @@
 	mcp->flags = 0;
 	mcp->tov = MBX_TOV_SECONDS;
 	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS)
+		goto failed;
 
 	/* Return mailbox data. */
 	*major = mcp->mb[1];
@@ -446,7 +448,7 @@
 		phy[1] = mcp->mb[9] >> 8;
 		phy[2] = mcp->mb[9] & 0xff;
 	}
-
+failed:
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
@@ -455,6 +457,7 @@
 		/*EMPTY*/
 		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
 	}
+	return rval;
 }
 
 /*
@@ -748,20 +751,20 @@
  *	Kernel context.
  */
 int
-qla2x00_abort_command(scsi_qla_host_t *vha, srb_t *sp, struct req_que *req)
+qla2x00_abort_command(srb_t *sp)
 {
 	unsigned long   flags = 0;
-	fc_port_t	*fcport;
 	int		rval;
 	uint32_t	handle = 0;
 	mbx_cmd_t	mc;
 	mbx_cmd_t	*mcp = &mc;
+	fc_port_t	*fcport = sp->fcport;
+	scsi_qla_host_t *vha = fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req = vha->req;
 
 	DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", vha->host_no));
 
-	fcport = sp->fcport;
-
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
 		if (req->outstanding_cmds[handle] == sp)
@@ -800,7 +803,7 @@
 }
 
 int
-qla2x00_abort_target(struct fc_port *fcport, unsigned int l)
+qla2x00_abort_target(struct fc_port *fcport, unsigned int l, int tag)
 {
 	int rval, rval2;
 	mbx_cmd_t  mc;
@@ -813,8 +816,8 @@
 
 	l = l;
 	vha = fcport->vha;
-	req = vha->hw->req_q_map[0];
-	rsp = vha->hw->rsp_q_map[0];
+	req = vha->hw->req_q_map[tag];
+	rsp = vha->hw->rsp_q_map[tag];
 	mcp->mb[0] = MBC_ABORT_TARGET;
 	mcp->out_mb = MBX_9|MBX_2|MBX_1|MBX_0;
 	if (HAS_EXTENDED_IDS(vha->hw)) {
@@ -850,7 +853,7 @@
 }
 
 int
-qla2x00_lun_reset(struct fc_port *fcport, unsigned int l)
+qla2x00_lun_reset(struct fc_port *fcport, unsigned int l, int tag)
 {
 	int rval, rval2;
 	mbx_cmd_t  mc;
@@ -862,8 +865,8 @@
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->vha->host_no));
 
 	vha = fcport->vha;
-	req = vha->hw->req_q_map[0];
-	rsp = vha->hw->rsp_q_map[0];
+	req = vha->hw->req_q_map[tag];
+	rsp = vha->hw->rsp_q_map[tag];
 	mcp->mb[0] = MBC_LUN_RESET;
 	mcp->out_mb = MBX_9|MBX_3|MBX_2|MBX_1|MBX_0;
 	if (HAS_EXTENDED_IDS(vha->hw))
@@ -931,6 +934,8 @@
 	mcp->mb[9] = vha->vp_idx;
 	mcp->out_mb = MBX_9|MBX_0;
 	mcp->in_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	if (IS_QLA81XX(vha->hw))
+		mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -952,9 +957,19 @@
 		DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n",
 		    vha->host_no, rval));
 	} else {
-		/*EMPTY*/
 		DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n",
 		    vha->host_no));
+
+		if (IS_QLA81XX(vha->hw)) {
+			vha->fcoe_vlan_id = mcp->mb[9] & 0xfff;
+			vha->fcoe_fcf_idx = mcp->mb[10];
+			vha->fcoe_vn_port_mac[5] = mcp->mb[11] >> 8;
+			vha->fcoe_vn_port_mac[4] = mcp->mb[11] & 0xff;
+			vha->fcoe_vn_port_mac[3] = mcp->mb[12] >> 8;
+			vha->fcoe_vn_port_mac[2] = mcp->mb[12] & 0xff;
+			vha->fcoe_vn_port_mac[1] = mcp->mb[13] >> 8;
+			vha->fcoe_vn_port_mac[0] = mcp->mb[13] & 0xff;
+		}
 	}
 
 	return rval;
@@ -1252,7 +1267,7 @@
 
 	mcp->mb[0] = MBC_GET_FIRMWARE_STATE;
 	mcp->out_mb = MBX_0;
-	mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -1261,6 +1276,8 @@
 	states[0] = mcp->mb[1];
 	states[1] = mcp->mb[2];
 	states[2] = mcp->mb[3];
+	states[3] = mcp->mb[4];
+	states[4] = mcp->mb[5];
 
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
@@ -1480,9 +1497,17 @@
 	dma_addr_t	lg_dma;
 	uint32_t	iop[2];
 	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req;
+	struct rsp_que *rsp;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
+	if (ql2xmultique_tag)
+		req = ha->req_q_map[0];
+	else
+		req = vha->req;
+	rsp = req->rsp;
+
 	lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma);
 	if (lg == NULL) {
 		DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n",
@@ -1493,6 +1518,7 @@
 
 	lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
 	lg->entry_count = 1;
+	lg->handle = MAKE_HANDLE(req->id, lg->handle);
 	lg->nport_handle = cpu_to_le16(loop_id);
 	lg->control_flags = __constant_cpu_to_le16(LCF_COMMAND_PLOGI);
 	if (opt & BIT_0)
@@ -1741,6 +1767,8 @@
 	struct logio_entry_24xx *lg;
 	dma_addr_t	lg_dma;
 	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req;
+	struct rsp_que *rsp;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
@@ -1752,8 +1780,14 @@
 	}
 	memset(lg, 0, sizeof(struct logio_entry_24xx));
 
+	if (ql2xmaxqueues > 1)
+		req = ha->req_q_map[0];
+	else
+		req = vha->req;
+	rsp = req->rsp;
 	lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
 	lg->entry_count = 1;
+	lg->handle = MAKE_HANDLE(req->id, lg->handle);
 	lg->nport_handle = cpu_to_le16(loop_id);
 	lg->control_flags =
 	    __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO);
@@ -1864,9 +1898,6 @@
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	if (IS_QLA81XX(vha->hw))
-	    return QLA_SUCCESS;
-
 	DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
 	    vha->host_no));
 
@@ -2195,21 +2226,21 @@
 }
 
 int
-qla24xx_abort_command(scsi_qla_host_t *vha, srb_t *sp, struct req_que *req)
+qla24xx_abort_command(srb_t *sp)
 {
 	int		rval;
-	fc_port_t	*fcport;
 	unsigned long   flags = 0;
 
 	struct abort_entry_24xx *abt;
 	dma_addr_t	abt_dma;
 	uint32_t	handle;
+	fc_port_t	*fcport = sp->fcport;
+	struct scsi_qla_host *vha = fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req = vha->req;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
-	fcport = sp->fcport;
-
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
 		if (req->outstanding_cmds[handle] == sp)
@@ -2231,6 +2262,7 @@
 
 	abt->entry_type = ABORT_IOCB_TYPE;
 	abt->entry_count = 1;
+	abt->handle = MAKE_HANDLE(req->id, abt->handle);
 	abt->nport_handle = cpu_to_le16(fcport->loop_id);
 	abt->handle_to_abort = handle;
 	abt->port_id[0] = fcport->d_id.b.al_pa;
@@ -2272,7 +2304,7 @@
 
 static int
 __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
-    unsigned int l)
+    unsigned int l, int tag)
 {
 	int		rval, rval2;
 	struct tsk_mgmt_cmd *tsk;
@@ -2286,8 +2318,11 @@
 
 	vha = fcport->vha;
 	ha = vha->hw;
-	req = ha->req_q_map[0];
-	rsp = ha->rsp_q_map[0];
+	req = vha->req;
+	if (ql2xmultique_tag)
+		rsp = ha->rsp_q_map[tag + 1];
+	else
+		rsp = req->rsp;
 	tsk = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &tsk_dma);
 	if (tsk == NULL) {
 		DEBUG2_3(printk("%s(%ld): failed to allocate Task Management "
@@ -2298,6 +2333,7 @@
 
 	tsk->p.tsk.entry_type = TSK_MGMT_IOCB_TYPE;
 	tsk->p.tsk.entry_count = 1;
+	tsk->p.tsk.handle = MAKE_HANDLE(req->id, tsk->p.tsk.handle);
 	tsk->p.tsk.nport_handle = cpu_to_le16(fcport->loop_id);
 	tsk->p.tsk.timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
 	tsk->p.tsk.control_flags = cpu_to_le32(type);
@@ -2344,15 +2380,15 @@
 }
 
 int
-qla24xx_abort_target(struct fc_port *fcport, unsigned int l)
+qla24xx_abort_target(struct fc_port *fcport, unsigned int l, int tag)
 {
-	return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET, fcport, l);
+	return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET, fcport, l, tag);
 }
 
 int
-qla24xx_lun_reset(struct fc_port *fcport, unsigned int l)
+qla24xx_lun_reset(struct fc_port *fcport, unsigned int l, int tag)
 {
-	return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l);
+	return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l, tag);
 }
 
 int
@@ -2446,6 +2482,8 @@
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
 		    vha->host_no, rval));
+		if (mcp->mb[0] == MBS_INVALID_COMMAND)
+			rval = QLA_INVALID_COMMAND;
 	} else {
 		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
 	}
@@ -2717,8 +2755,11 @@
 		if (vp_idx == 0)
 			return;
 
-		if (MSB(stat) == 1)
+		if (MSB(stat) == 1) {
+			DEBUG2(printk("scsi(%ld): Could not acquire ID for "
+			    "VP[%d].\n", vha->host_no, vp_idx));
 			return;
+		}
 
 		list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
 			if (vp_idx == vp->vp_idx)
@@ -3141,6 +3182,8 @@
 		WRT_REG_DWORD(&reg->req_q_in, 0);
 		WRT_REG_DWORD(&reg->req_q_out, 0);
 	}
+	req->req_q_in = &reg->req_q_in;
+	req->req_q_out = &reg->req_q_out;
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -3167,7 +3210,6 @@
 	mcp->mb[6] = MSW(MSD(rsp->dma));
 	mcp->mb[7] = LSW(MSD(rsp->dma));
 	mcp->mb[5] = rsp->length;
-	mcp->mb[11] = rsp->vp_idx;
 	mcp->mb[14] = rsp->msix->entry;
 	mcp->mb[13] = rsp->rid;
 
@@ -3179,7 +3221,7 @@
 	mcp->mb[8] = 0;
 	/* que out ptr index */
 	mcp->mb[9] = 0;
-	mcp->out_mb = MBX_14|MBX_13|MBX_12|MBX_11|MBX_10|MBX_9|MBX_8|MBX_7
+	mcp->out_mb = MBX_14|MBX_13|MBX_9|MBX_8|MBX_7
 			|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
 	mcp->flags = MBX_DMA_OUT;
@@ -3384,7 +3426,7 @@
 		DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
 		    vha->host_no, rval, mcp->mb[0]));
 	} else {
-		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
 	}
 
 	return rval;
@@ -3428,3 +3470,141 @@
 
 	return rval;
 }
+
+int
+qla2x00_get_xgmac_stats(scsi_qla_host_t *vha, dma_addr_t stats_dma,
+    uint16_t size_in_bytes, uint16_t *actual_size)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_QLA81XX(vha->hw))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_GET_XGMAC_STATS;
+	mcp->mb[2] = MSW(stats_dma);
+	mcp->mb[3] = LSW(stats_dma);
+	mcp->mb[6] = MSW(MSD(stats_dma));
+	mcp->mb[7] = LSW(MSD(stats_dma));
+	mcp->mb[8] = size_in_bytes >> 2;
+	mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0;
+	mcp->in_mb = MBX_2|MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
+		    "mb[1]=0x%x mb[2]=0x%x.\n", __func__, vha->host_no, rval,
+		    mcp->mb[0], mcp->mb[1], mcp->mb[2]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+
+		*actual_size = mcp->mb[2] << 2;
+	}
+
+	return rval;
+}
+
+int
+qla2x00_get_dcbx_params(scsi_qla_host_t *vha, dma_addr_t tlv_dma,
+    uint16_t size)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_QLA81XX(vha->hw))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_GET_DCBX_PARAMS;
+	mcp->mb[1] = 0;
+	mcp->mb[2] = MSW(tlv_dma);
+	mcp->mb[3] = LSW(tlv_dma);
+	mcp->mb[6] = MSW(MSD(tlv_dma));
+	mcp->mb[7] = LSW(MSD(tlv_dma));
+	mcp->mb[8] = size;
+	mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_2|MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
+		    "mb[1]=0x%x mb[2]=0x%x.\n", __func__, vha->host_no, rval,
+		    mcp->mb[0], mcp->mb[1], mcp->mb[2]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+	}
+
+	return rval;
+}
+
+int
+qla2x00_read_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t *data)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_FWI2_CAPABLE(vha->hw))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_READ_RAM_EXTENDED;
+	mcp->mb[1] = LSW(risc_addr);
+	mcp->mb[8] = MSW(risc_addr);
+	mcp->out_mb = MBX_8|MBX_1|MBX_0;
+	mcp->in_mb = MBX_3|MBX_2|MBX_0;
+	mcp->tov = 30;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__,
+		    vha->host_no, rval, mcp->mb[0]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+		*data = mcp->mb[3] << 16 | mcp->mb[2];
+	}
+
+	return rval;
+}
+
+int
+qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_FWI2_CAPABLE(vha->hw))
+                return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_WRITE_RAM_WORD_EXTENDED;
+	mcp->mb[1] = LSW(risc_addr);
+	mcp->mb[2] = LSW(data);
+	mcp->mb[3] = MSW(data);
+	mcp->mb[8] = MSW(risc_addr);
+	mcp->out_mb = MBX_8|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_0;
+	mcp->tov = 30;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__,
+		    vha->host_no, rval, mcp->mb[0]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+	}
+
+	return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 51716c7..650bcef 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -398,9 +398,8 @@
 
 	qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL);
 
-	memset(vha->req_ques, 0, sizeof(vha->req_ques));
-	vha->req_ques[0] = ha->req_q_map[0]->id;
-	host->can_queue = ha->req_q_map[0]->length + 128;
+	vha->req = base_vha->req;
+	host->can_queue = base_vha->req->length + 128;
 	host->this_id = 255;
 	host->cmd_per_lun = 3;
 	host->max_cmd_len = MAX_CMDSZ;
@@ -515,76 +514,53 @@
 
 /* Delete all queues for a given vhost */
 int
-qla25xx_delete_queues(struct scsi_qla_host *vha, uint8_t que_no)
+qla25xx_delete_queues(struct scsi_qla_host *vha)
 {
 	int cnt, ret = 0;
 	struct req_que *req = NULL;
 	struct rsp_que *rsp = NULL;
 	struct qla_hw_data *ha = vha->hw;
 
-	if (que_no) {
-	/* Delete request queue */
-		req = ha->req_q_map[que_no];
+	/* Delete request queues */
+	for (cnt = 1; cnt < ha->max_req_queues; cnt++) {
+		req = ha->req_q_map[cnt];
 		if (req) {
-			rsp = req->rsp;
 			ret = qla25xx_delete_req_que(vha, req);
 			if (ret != QLA_SUCCESS) {
 				qla_printk(KERN_WARNING, ha,
-				"Couldn't delete req que %d\n", req->id);
+				"Couldn't delete req que %d\n",
+				req->id);
 				return ret;
 			}
-			/* Delete associated response queue */
-			if (rsp) {
-				ret = qla25xx_delete_rsp_que(vha, rsp);
-				if (ret != QLA_SUCCESS) {
-					qla_printk(KERN_WARNING, ha,
-						"Couldn't delete rsp que %d\n",
-						rsp->id);
-					return ret;
-				}
-			}
-		}
-	} else {  /* delete all queues of this host */
-		for (cnt = 0; cnt < QLA_MAX_HOST_QUES; cnt++) {
-			/* Delete request queues */
-			req = ha->req_q_map[vha->req_ques[cnt]];
-			if (req && req->id) {
-				rsp = req->rsp;
-				ret = qla25xx_delete_req_que(vha, req);
-				if (ret != QLA_SUCCESS) {
-					qla_printk(KERN_WARNING, ha,
-						"Couldn't delete req que %d\n",
-						vha->req_ques[cnt]);
-					return ret;
-				}
-				vha->req_ques[cnt] = ha->req_q_map[0]->id;
-			/* Delete associated response queue */
-				if (rsp && rsp->id) {
-					ret = qla25xx_delete_rsp_que(vha, rsp);
-					if (ret != QLA_SUCCESS) {
-						qla_printk(KERN_WARNING, ha,
-						"Couldn't delete rsp que %d\n",
-						rsp->id);
-						return ret;
-					}
-				}
-			}
 		}
 	}
-	qla_printk(KERN_INFO, ha, "Queues deleted for vport:%d\n",
-		vha->vp_idx);
+
+	/* Delete response queues */
+	for (cnt = 1; cnt < ha->max_rsp_queues; cnt++) {
+		rsp = ha->rsp_q_map[cnt];
+		if (rsp) {
+			ret = qla25xx_delete_rsp_que(vha, rsp);
+			if (ret != QLA_SUCCESS) {
+				qla_printk(KERN_WARNING, ha,
+				"Couldn't delete rsp que %d\n",
+				rsp->id);
+				return ret;
+			}
+		}
+	}
 	return ret;
 }
 
 int
 qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
-	uint8_t vp_idx, uint16_t rid, uint8_t rsp_que, uint8_t qos)
+	uint8_t vp_idx, uint16_t rid, int rsp_que, uint8_t qos)
 {
 	int ret = 0;
 	struct req_que *req = NULL;
 	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
 	uint16_t que_id = 0;
 	device_reg_t __iomem *reg;
+	uint32_t cnt;
 
 	req = kzalloc(sizeof(struct req_que), GFP_KERNEL);
 	if (req == NULL) {
@@ -604,8 +580,8 @@
 	}
 
 	mutex_lock(&ha->vport_lock);
-	que_id = find_first_zero_bit(ha->req_qid_map, ha->max_queues);
-	if (que_id >= ha->max_queues) {
+	que_id = find_first_zero_bit(ha->req_qid_map, ha->max_req_queues);
+	if (que_id >= ha->max_req_queues) {
 		mutex_unlock(&ha->vport_lock);
 		qla_printk(KERN_INFO, ha, "No resources to create "
 			 "additional request queue\n");
@@ -617,10 +593,10 @@
 	req->vp_idx = vp_idx;
 	req->qos = qos;
 
-	if (ha->rsp_q_map[rsp_que]) {
+	if (rsp_que < 0)
+		req->rsp = NULL;
+	else
 		req->rsp = ha->rsp_q_map[rsp_que];
-		req->rsp->req = req;
-	}
 	/* Use alternate PCI bus number */
 	if (MSB(req->rid))
 		options |= BIT_4;
@@ -628,13 +604,16 @@
 	if (LSB(req->rid))
 		options |= BIT_5;
 	req->options = options;
+
+	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+		req->outstanding_cmds[cnt] = NULL;
+	req->current_outstanding_cmd = 1;
+
 	req->ring_ptr = req->ring;
 	req->ring_index = 0;
 	req->cnt = req->length;
 	req->id = que_id;
 	reg = ISP_QUE_REG(ha, que_id);
-	req->req_q_in = &reg->isp25mq.req_q_in;
-	req->req_q_out = &reg->isp25mq.req_q_out;
 	req->max_q_depth = ha->req_q_map[0]->max_q_depth;
 	mutex_unlock(&ha->vport_lock);
 
@@ -654,10 +633,19 @@
 	return 0;
 }
 
+static void qla_do_work(struct work_struct *work)
+{
+	struct rsp_que *rsp = container_of(work, struct rsp_que, q_work);
+	struct scsi_qla_host *vha;
+
+	vha = qla25xx_get_host(rsp);
+	qla24xx_process_response_queue(vha, rsp);
+}
+
 /* create response queue */
 int
 qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
-	uint8_t vp_idx, uint16_t rid)
+	uint8_t vp_idx, uint16_t rid, int req)
 {
 	int ret = 0;
 	struct rsp_que *rsp = NULL;
@@ -672,7 +660,7 @@
 		goto que_failed;
 	}
 
-	rsp->length = RESPONSE_ENTRY_CNT_2300;
+	rsp->length = RESPONSE_ENTRY_CNT_MQ;
 	rsp->ring = dma_alloc_coherent(&ha->pdev->dev,
 			(rsp->length + 1) * sizeof(response_t),
 			&rsp->dma, GFP_KERNEL);
@@ -683,8 +671,8 @@
 	}
 
 	mutex_lock(&ha->vport_lock);
-	que_id = find_first_zero_bit(ha->rsp_qid_map, ha->max_queues);
-	if (que_id >= ha->max_queues) {
+	que_id = find_first_zero_bit(ha->rsp_qid_map, ha->max_rsp_queues);
+	if (que_id >= ha->max_rsp_queues) {
 		mutex_unlock(&ha->vport_lock);
 		qla_printk(KERN_INFO, ha, "No resources to create "
 			 "additional response queue\n");
@@ -708,8 +696,6 @@
 	if (LSB(rsp->rid))
 		options |= BIT_5;
 	rsp->options = options;
-	rsp->ring_ptr = rsp->ring;
-	rsp->ring_index = 0;
 	rsp->id = que_id;
 	reg = ISP_QUE_REG(ha, que_id);
 	rsp->rsp_q_in = &reg->isp25mq.rsp_q_in;
@@ -728,9 +714,14 @@
 		mutex_unlock(&ha->vport_lock);
 		goto que_failed;
 	}
+	if (req >= 0)
+		rsp->req = ha->req_q_map[req];
+	else
+		rsp->req = NULL;
 
 	qla2x00_init_response_q_entries(rsp);
-
+	if (rsp->hw->wq)
+		INIT_WORK(&rsp->q_work, qla_do_work);
 	return rsp->id;
 
 que_failed:
@@ -744,14 +735,16 @@
 	uint16_t options = 0;
 	uint8_t ret = 0;
 	struct qla_hw_data *ha = vha->hw;
+	struct rsp_que *rsp;
 
 	options |= BIT_1;
-	ret = qla25xx_create_rsp_que(ha, options, vha->vp_idx, 0);
+	ret = qla25xx_create_rsp_que(ha, options, vha->vp_idx, 0, -1);
 	if (!ret) {
 		qla_printk(KERN_WARNING, ha, "Response Que create failed\n");
 		return ret;
 	} else
 		qla_printk(KERN_INFO, ha, "Response Que:%d created.\n", ret);
+	rsp = ha->rsp_q_map[ret];
 
 	options = 0;
 	if (qos & BIT_7)
@@ -759,10 +752,11 @@
 	ret = qla25xx_create_req_que(ha, options, vha->vp_idx, 0, ret,
 					qos & ~BIT_7);
 	if (ret) {
-		vha->req_ques[0] = ret;
+		vha->req = ha->req_q_map[ret];
 		qla_printk(KERN_INFO, ha, "Request Que:%d created.\n", ret);
 	} else
 		qla_printk(KERN_WARNING, ha, "Request Que create failed\n");
+	rsp->req = ha->req_q_map[ret];
 
 	return ret;
 }
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e4fdcda..dcf0116 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -77,6 +77,14 @@
 MODULE_PARM_DESC(ql2xmaxqdepth,
 		"Maximum queue depth to report for target devices.");
 
+int ql2xqfulltracking = 1;
+module_param(ql2xqfulltracking, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(ql2xqfulltracking,
+		"Controls whether the driver tracks queue full status "
+		"returns and dynamically adjusts a scsi device's queue "
+		"depth.  Default is 1, perform tracking.  Set to 0 to "
+		"disable dynamic tracking and adjustment of queue depth.");
+
 int ql2xqfullrampup = 120;
 module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xqfullrampup,
@@ -96,6 +104,23 @@
 		"Enables MQ settings "
 		"Default is 1 for single queue. Set it to number \
 			of queues in MQ mode.");
+
+int ql2xmultique_tag;
+module_param(ql2xmultique_tag, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xmultique_tag,
+		"Enables CPU affinity settings for the driver "
+		"Default is 0 for no affinity of request and response IO. "
+		"Set it to 1 to turn on the cpu affinity.");
+
+int ql2xfwloadbin;
+module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xfwloadbin,
+		"Option to specify location from which to load ISP firmware:\n"
+		" 2 -- load firmware via the request_firmware() (hotplug)\n"
+		"      interface.\n"
+		" 1 -- load firmware from flash.\n"
+		" 0 -- use default semantics.\n");
+
 /*
  * SCSI host template entry points
  */
@@ -187,7 +212,7 @@
 /* -------------------------------------------------------------------------- */
 static int qla2x00_alloc_queues(struct qla_hw_data *ha)
 {
-	ha->req_q_map = kzalloc(sizeof(struct req_que *) * ha->max_queues,
+	ha->req_q_map = kzalloc(sizeof(struct req_que *) * ha->max_req_queues,
 				GFP_KERNEL);
 	if (!ha->req_q_map) {
 		qla_printk(KERN_WARNING, ha,
@@ -195,7 +220,7 @@
 		goto fail_req_map;
 	}
 
-	ha->rsp_q_map = kzalloc(sizeof(struct rsp_que *) * ha->max_queues,
+	ha->rsp_q_map = kzalloc(sizeof(struct rsp_que *) * ha->max_rsp_queues,
 				GFP_KERNEL);
 	if (!ha->rsp_q_map) {
 		qla_printk(KERN_WARNING, ha,
@@ -213,16 +238,8 @@
 	return -ENOMEM;
 }
 
-static void qla2x00_free_que(struct qla_hw_data *ha, struct req_que *req,
-	struct rsp_que *rsp)
+static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req)
 {
-	if (rsp && rsp->ring)
-		dma_free_coherent(&ha->pdev->dev,
-		(rsp->length + 1) * sizeof(response_t),
-		rsp->ring, rsp->dma);
-
-	kfree(rsp);
-	rsp = NULL;
 	if (req && req->ring)
 		dma_free_coherent(&ha->pdev->dev,
 		(req->length + 1) * sizeof(request_t),
@@ -232,22 +249,77 @@
 	req = NULL;
 }
 
+static void qla2x00_free_rsp_que(struct qla_hw_data *ha, struct rsp_que *rsp)
+{
+	if (rsp && rsp->ring)
+		dma_free_coherent(&ha->pdev->dev,
+		(rsp->length + 1) * sizeof(response_t),
+		rsp->ring, rsp->dma);
+
+	kfree(rsp);
+	rsp = NULL;
+}
+
 static void qla2x00_free_queues(struct qla_hw_data *ha)
 {
 	struct req_que *req;
 	struct rsp_que *rsp;
 	int cnt;
 
-	for (cnt = 0; cnt < ha->max_queues; cnt++) {
-		rsp = ha->rsp_q_map[cnt];
+	for (cnt = 0; cnt < ha->max_req_queues; cnt++) {
 		req = ha->req_q_map[cnt];
-		qla2x00_free_que(ha, req, rsp);
+		qla2x00_free_req_que(ha, req);
+	}
+	kfree(ha->req_q_map);
+	ha->req_q_map = NULL;
+
+	for (cnt = 0; cnt < ha->max_rsp_queues; cnt++) {
+		rsp = ha->rsp_q_map[cnt];
+		qla2x00_free_rsp_que(ha, rsp);
 	}
 	kfree(ha->rsp_q_map);
 	ha->rsp_q_map = NULL;
+}
 
-	kfree(ha->req_q_map);
-	ha->req_q_map = NULL;
+static int qla25xx_setup_mode(struct scsi_qla_host *vha)
+{
+	uint16_t options = 0;
+	int ques, req, ret;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (ql2xmultique_tag) {
+		/* CPU affinity mode */
+		ha->wq = create_workqueue("qla2xxx_wq");
+		/* create a request queue for IO */
+		options |= BIT_7;
+		req = qla25xx_create_req_que(ha, options, 0, 0, -1,
+			QLA_DEFAULT_QUE_QOS);
+		if (!req) {
+			qla_printk(KERN_WARNING, ha,
+				"Can't create request queue\n");
+			goto fail;
+		}
+		vha->req = ha->req_q_map[req];
+		options |= BIT_1;
+		for (ques = 1; ques < ha->max_rsp_queues; ques++) {
+			ret = qla25xx_create_rsp_que(ha, options, 0, 0, req);
+			if (!ret) {
+				qla_printk(KERN_WARNING, ha,
+					"Response Queue create failed\n");
+				goto fail2;
+			}
+		}
+		DEBUG2(qla_printk(KERN_INFO, ha,
+			"CPU affinity mode enabled, no. of response"
+			" queues:%d, no. of request queues:%d\n",
+			ha->max_rsp_queues, ha->max_req_queues));
+	}
+	return 0;
+fail2:
+	qla25xx_delete_queues(vha);
+fail:
+	ha->mqenable = 0;
+	return 1;
 }
 
 static char *
@@ -387,7 +459,6 @@
 
 	sp->fcport = fcport;
 	sp->cmd = cmd;
-	sp->que = ha->req_q_map[0];
 	sp->flags = 0;
 	CMD_SP(cmd) = (void *)sp;
 	cmd->scsi_done = done;
@@ -612,7 +683,7 @@
 void
 qla2x00_abort_fcport_cmds(fc_port_t *fcport)
 {
-	int cnt, que, id;
+	int cnt;
 	unsigned long flags;
 	srb_t *sp;
 	scsi_qla_host_t *vha = fcport->vha;
@@ -620,32 +691,27 @@
 	struct req_que *req;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	for (que = 0; que < QLA_MAX_HOST_QUES; que++) {
-		id = vha->req_ques[que];
-		req = ha->req_q_map[id];
-		if (!req)
+	req = vha->req;
+	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+		sp = req->outstanding_cmds[cnt];
+		if (!sp)
 			continue;
-		for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
-			sp = req->outstanding_cmds[cnt];
-			if (!sp)
-				continue;
-			if (sp->fcport != fcport)
-				continue;
+		if (sp->fcport != fcport)
+			continue;
 
-			spin_unlock_irqrestore(&ha->hardware_lock, flags);
-			if (ha->isp_ops->abort_command(vha, sp, req)) {
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+		if (ha->isp_ops->abort_command(sp)) {
+			DEBUG2(qla_printk(KERN_WARNING, ha,
+			"Abort failed --  %lx\n",
+			sp->cmd->serial_number));
+		} else {
+			if (qla2x00_eh_wait_on_command(sp->cmd) !=
+				QLA_SUCCESS)
 				DEBUG2(qla_printk(KERN_WARNING, ha,
-				"Abort failed --  %lx\n",
+				"Abort failed while waiting --  %lx\n",
 				sp->cmd->serial_number));
-			} else {
-				if (qla2x00_eh_wait_on_command(sp->cmd) !=
-					QLA_SUCCESS)
-					DEBUG2(qla_printk(KERN_WARNING, ha,
-					"Abort failed while waiting --  %lx\n",
-					sp->cmd->serial_number));
-			}
-			spin_lock_irqsave(&ha->hardware_lock, flags);
 		}
+		spin_lock_irqsave(&ha->hardware_lock, flags);
 	}
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 }
@@ -693,7 +759,7 @@
 	unsigned long flags;
 	int wait = 0;
 	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req;
+	struct req_que *req = vha->req;
 	srb_t *spt;
 
 	qla2x00_block_error_handler(cmd);
@@ -709,7 +775,6 @@
 	spt = (srb_t *) CMD_SP(cmd);
 	if (!spt)
 		return SUCCESS;
-	req = spt->que;
 
 	/* Check active list for command command. */
 	spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -726,7 +791,7 @@
 		" pid=%ld.\n", __func__, vha->host_no, sp, serial));
 
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
-		if (ha->isp_ops->abort_command(vha, sp, req)) {
+		if (ha->isp_ops->abort_command(sp)) {
 			DEBUG2(printk("%s(%ld): abort_command "
 			"mbx failed.\n", __func__, vha->host_no));
 			ret = FAILED;
@@ -777,7 +842,7 @@
 		return status;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	req = sp->que;
+	req = vha->req;
 	for (cnt = 1; status == QLA_SUCCESS &&
 		cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
 		sp = req->outstanding_cmds[cnt];
@@ -820,7 +885,7 @@
 
 static int
 __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
-    struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, unsigned int))
+    struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, unsigned int, int))
 {
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
@@ -841,7 +906,8 @@
 	if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS)
 		goto eh_reset_failed;
 	err = 2;
-	if (do_reset(fcport, cmd->device->lun) != QLA_SUCCESS)
+	if (do_reset(fcport, cmd->device->lun, cmd->request->cpu + 1)
+		!= QLA_SUCCESS)
 		goto eh_reset_failed;
 	err = 3;
 	if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id,
@@ -996,6 +1062,9 @@
 		if (qla2x00_vp_abort_isp(vha))
 			goto eh_host_reset_lock;
 	} else {
+		if (ha->wq)
+			flush_workqueue(ha->wq);
+
 		set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
 		if (qla2x00_abort_isp(base_vha)) {
 			clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
@@ -1037,7 +1106,8 @@
 	struct fc_port *fcport;
 	struct qla_hw_data *ha = vha->hw;
 
-	if (ha->flags.enable_lip_full_login && !vha->vp_idx) {
+	if (ha->flags.enable_lip_full_login && !vha->vp_idx &&
+	    !IS_QLA81XX(ha)) {
 		ret = qla2x00_full_login_lip(vha);
 		if (ret != QLA_SUCCESS) {
 			DEBUG2_3(printk("%s(%ld): failed: "
@@ -1064,7 +1134,7 @@
 			if (fcport->port_type != FCT_TARGET)
 				continue;
 
-			ret = ha->isp_ops->target_reset(fcport, 0);
+			ret = ha->isp_ops->target_reset(fcport, 0, 0);
 			if (ret != QLA_SUCCESS) {
 				DEBUG2_3(printk("%s(%ld): bus_reset failed: "
 				    "target_reset=%d d_id=%x.\n", __func__,
@@ -1088,7 +1158,7 @@
 	struct req_que *req;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	for (que = 0; que < ha->max_queues; que++) {
+	for (que = 0; que < ha->max_req_queues; que++) {
 		req = ha->req_q_map[que];
 		if (!req)
 			continue;
@@ -1123,7 +1193,7 @@
 	scsi_qla_host_t *vha = shost_priv(sdev->host);
 	struct qla_hw_data *ha = vha->hw;
 	struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
-	struct req_que *req = ha->req_q_map[vha->req_ques[0]];
+	struct req_que *req = vha->req;
 
 	if (sdev->tagged_supported)
 		scsi_activate_tcq(sdev, req->max_q_depth);
@@ -1511,6 +1581,13 @@
 		ha->fw_srisc_address = RISC_START_ADDRESS_2400;
 		break;
 	}
+
+	/* Get adapter physical port no from interrupt pin register. */
+	pci_read_config_byte(ha->pdev, PCI_INTERRUPT_PIN, &ha->port_no);
+	if (ha->port_no & 1)
+		ha->flags.port0 = 1;
+	else
+		ha->flags.port0 = 0;
 }
 
 static int
@@ -1518,6 +1595,7 @@
 {
 	resource_size_t pio;
 	uint16_t msix;
+	int cpus;
 
 	if (pci_request_selected_regions(ha->pdev, ha->bars,
 	    QLA2XXX_DRIVER_NAME)) {
@@ -1571,8 +1649,9 @@
 	}
 
 	/* Determine queue resources */
-	ha->max_queues = 1;
-	if (ql2xmaxqueues <= 1 || (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
+	ha->max_req_queues = ha->max_rsp_queues = 1;
+	if ((ql2xmaxqueues <= 1 || ql2xmultique_tag < 1) &&
+		(!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
 		goto mqiobase_exit;
 	ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
 			pci_resource_len(ha->pdev, 3));
@@ -1582,18 +1661,24 @@
 		ha->msix_count = msix;
 		/* Max queues are bounded by available msix vectors */
 		/* queue 0 uses two msix vectors */
-		if (ha->msix_count - 1 < ql2xmaxqueues)
-			ha->max_queues = ha->msix_count - 1;
-		else if (ql2xmaxqueues > QLA_MQ_SIZE)
-			ha->max_queues = QLA_MQ_SIZE;
-		else
-			ha->max_queues = ql2xmaxqueues;
+		if (ql2xmultique_tag) {
+			cpus = num_online_cpus();
+			ha->max_rsp_queues = (ha->msix_count - 1 - cpus) ?
+				(cpus + 1) : (ha->msix_count - 1);
+			ha->max_req_queues = 2;
+		} else if (ql2xmaxqueues > 1) {
+			ha->max_req_queues = ql2xmaxqueues > QLA_MQ_SIZE ?
+						QLA_MQ_SIZE : ql2xmaxqueues;
+			DEBUG2(qla_printk(KERN_INFO, ha, "QoS mode set, max no"
+			" of request queues:%d\n", ha->max_req_queues));
+		}
 		qla_printk(KERN_INFO, ha,
 			"MSI-X vector count: %d\n", msix);
-	}
+	} else
+		qla_printk(KERN_INFO, ha, "BAR 3 not enabled\n");
 
 mqiobase_exit:
-	ha->msix_count = ha->max_queues + 1;
+	ha->msix_count = ha->max_rsp_queues + 1;
 	return (0);
 
 iospace_error_exit:
@@ -1605,6 +1690,9 @@
 {
 	scsi_qla_host_t *vha = shost_priv(shost);
 
+	if (vha->hw->flags.running_gold_fw)
+		return;
+
 	set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
 	set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
 	set_bit(RSCN_UPDATE, &vha->dpc_flags);
@@ -1768,6 +1856,7 @@
 		ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
 		ha->gid_list_info_size = 8;
 		ha->optrom_size = OPTROM_SIZE_81XX;
+		ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
 		ha->isp_ops = &qla81xx_isp_ops;
 		ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX;
 		ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX;
@@ -1803,14 +1892,15 @@
 
 		ret = -ENOMEM;
 		qla2x00_mem_free(ha);
-		qla2x00_free_que(ha, req, rsp);
+		qla2x00_free_req_que(ha, req);
+		qla2x00_free_rsp_que(ha, rsp);
 		goto probe_hw_failed;
 	}
 
 	pci_set_drvdata(pdev, base_vha);
 
 	host = base_vha->host;
-	base_vha->req_ques[0] = req->id;
+	base_vha->req = req;
 	host->can_queue = req->length + 128;
 	if (IS_QLA2XXX_MIDTYPE(ha))
 		base_vha->mgmt_svr_loop_id = 10 + base_vha->vp_idx;
@@ -1841,7 +1931,10 @@
 	}
 	ha->rsp_q_map[0] = rsp;
 	ha->req_q_map[0] = req;
-
+	rsp->req = req;
+	req->rsp = rsp;
+	set_bit(0, ha->req_qid_map);
+	set_bit(0, ha->rsp_qid_map);
 	/* FWI2-capable only. */
 	req->req_q_in = &ha->iobase->isp24.req_q_in;
 	req->req_q_out = &ha->iobase->isp24.req_q_out;
@@ -1866,6 +1959,15 @@
 		goto probe_failed;
 	}
 
+	if (ha->mqenable)
+		if (qla25xx_setup_mode(base_vha))
+			qla_printk(KERN_WARNING, ha,
+				"Can't create queues, falling back to single"
+				" queue mode\n");
+
+	if (ha->flags.running_gold_fw)
+		goto skip_dpc;
+
 	/*
 	 * Startup the kernel thread for this host adapter
 	 */
@@ -1878,6 +1980,7 @@
 		goto probe_failed;
 	}
 
+skip_dpc:
 	list_add_tail(&base_vha->list, &ha->vp_list);
 	base_vha->host->irq = ha->pdev->irq;
 
@@ -1917,8 +2020,9 @@
 	return 0;
 
 probe_init_failed:
-	qla2x00_free_que(ha, req, rsp);
-	ha->max_queues = 0;
+	qla2x00_free_req_que(ha, req);
+	qla2x00_free_rsp_que(ha, rsp);
+	ha->max_req_queues = ha->max_rsp_queues = 0;
 
 probe_failed:
 	if (base_vha->timer_active)
@@ -1976,6 +2080,13 @@
 
 	base_vha->flags.online = 0;
 
+	/* Flush the work queue and remove it */
+	if (ha->wq) {
+		flush_workqueue(ha->wq);
+		destroy_workqueue(ha->wq);
+		ha->wq = NULL;
+	}
+
 	/* Kill the kernel thread for this host */
 	if (ha->dpc_thread) {
 		struct task_struct *t = ha->dpc_thread;
@@ -2017,6 +2128,8 @@
 {
 	struct qla_hw_data *ha = vha->hw;
 
+	qla25xx_delete_queues(vha);
+
 	if (ha->flags.fce_enabled)
 		qla2x00_disable_fce_trace(vha, NULL, NULL);
 
@@ -2329,6 +2442,14 @@
 		vfree(ha->fw_dump);
 	}
 
+	if (ha->dcbx_tlv)
+		dma_free_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
+		    ha->dcbx_tlv, ha->dcbx_tlv_dma);
+
+	if (ha->xgmac_data)
+		dma_free_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE,
+		    ha->xgmac_data, ha->xgmac_data_dma);
+
 	if (ha->sns_cmd)
 		dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
 		ha->sns_cmd, ha->sns_cmd_dma);
@@ -2412,6 +2533,8 @@
 	INIT_LIST_HEAD(&vha->work_list);
 	INIT_LIST_HEAD(&vha->list);
 
+	spin_lock_init(&vha->work_lock);
+
 	sprintf(vha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, vha->host_no);
 	return vha;
 
@@ -2420,13 +2543,11 @@
 }
 
 static struct qla_work_evt *
-qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type,
-    int locked)
+qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type)
 {
 	struct qla_work_evt *e;
 
-	e = kzalloc(sizeof(struct qla_work_evt), locked ? GFP_ATOMIC:
-	    GFP_KERNEL);
+	e = kzalloc(sizeof(struct qla_work_evt), GFP_ATOMIC);
 	if (!e)
 		return NULL;
 
@@ -2437,17 +2558,15 @@
 }
 
 static int
-qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e, int locked)
+qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e)
 {
-	unsigned long uninitialized_var(flags);
-	struct qla_hw_data *ha = vha->hw;
+	unsigned long flags;
 
-	if (!locked)
-		spin_lock_irqsave(&ha->hardware_lock, flags);
+	spin_lock_irqsave(&vha->work_lock, flags);
 	list_add_tail(&e->list, &vha->work_list);
+	spin_unlock_irqrestore(&vha->work_lock, flags);
 	qla2xxx_wake_dpc(vha);
-	if (!locked)
-		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
 	return QLA_SUCCESS;
 }
 
@@ -2457,13 +2576,13 @@
 {
 	struct qla_work_evt *e;
 
-	e = qla2x00_alloc_work(vha, QLA_EVT_AEN, 1);
+	e = qla2x00_alloc_work(vha, QLA_EVT_AEN);
 	if (!e)
 		return QLA_FUNCTION_FAILED;
 
 	e->u.aen.code = code;
 	e->u.aen.data = data;
-	return qla2x00_post_work(vha, e, 1);
+	return qla2x00_post_work(vha, e);
 }
 
 int
@@ -2471,25 +2590,27 @@
 {
 	struct qla_work_evt *e;
 
-	e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK, 1);
+	e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK);
 	if (!e)
 		return QLA_FUNCTION_FAILED;
 
 	memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
-	return qla2x00_post_work(vha, e, 1);
+	return qla2x00_post_work(vha, e);
 }
 
 static void
 qla2x00_do_work(struct scsi_qla_host *vha)
 {
-	struct qla_work_evt *e;
-	struct qla_hw_data *ha = vha->hw;
+	struct qla_work_evt *e, *tmp;
+	unsigned long flags;
+	LIST_HEAD(work);
 
-	spin_lock_irq(&ha->hardware_lock);
-	while (!list_empty(&vha->work_list)) {
-		e = list_entry(vha->work_list.next, struct qla_work_evt, list);
+	spin_lock_irqsave(&vha->work_lock, flags);
+	list_splice_init(&vha->work_list, &work);
+	spin_unlock_irqrestore(&vha->work_lock, flags);
+
+	list_for_each_entry_safe(e, tmp, &work, list) {
 		list_del_init(&e->list);
-		spin_unlock_irq(&ha->hardware_lock);
 
 		switch (e->type) {
 		case QLA_EVT_AEN:
@@ -2502,10 +2623,9 @@
 		}
 		if (e->flags & QLA_EVT_FLAG_FREE)
 			kfree(e);
-		spin_lock_irq(&ha->hardware_lock);
 	}
-	spin_unlock_irq(&ha->hardware_lock);
 }
+
 /* Relogins all the fcports of a vport
  * Context: dpc thread
  */
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 152ecfc..6260505 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -219,8 +219,8 @@
 	wait_cnt = NVR_WAIT_CNT;
 	do {
 		if (!--wait_cnt) {
-			DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
-			    __func__, vha->host_no));
+			DEBUG9_10(qla_printk(KERN_WARNING, ha,
+			    "NVRAM didn't go ready...\n"));
 			break;
 		}
 		NVRAM_DELAY();
@@ -349,7 +349,7 @@
 		wait_cnt = NVR_WAIT_CNT;
 		do {
 			if (!--wait_cnt) {
-				DEBUG9_10(qla_printk(
+				DEBUG9_10(qla_printk(KERN_WARNING, ha,
 				    "NVRAM didn't go ready...\n"));
 				break;
 			}
@@ -408,7 +408,8 @@
 	wait_cnt = NVR_WAIT_CNT;
 	do {
 		if (!--wait_cnt) {
-			DEBUG9_10(qla_printk("NVRAM didn't go ready...\n"));
+			DEBUG9_10(qla_printk(KERN_WARNING, ha,
+			    "NVRAM didn't go ready...\n"));
 			break;
 		}
 		NVRAM_DELAY();
@@ -701,32 +702,35 @@
 			break;
 		case FLT_REG_VPD_0:
 			ha->flt_region_vpd_nvram = start;
-			if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+			if (ha->flags.port0)
 				ha->flt_region_vpd = start;
 			break;
 		case FLT_REG_VPD_1:
-			if (PCI_FUNC(ha->pdev->devfn) & 1)
+			if (!ha->flags.port0)
 				ha->flt_region_vpd = start;
 			break;
 		case FLT_REG_NVRAM_0:
-			if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+			if (ha->flags.port0)
 				ha->flt_region_nvram = start;
 			break;
 		case FLT_REG_NVRAM_1:
-			if (PCI_FUNC(ha->pdev->devfn) & 1)
+			if (!ha->flags.port0)
 				ha->flt_region_nvram = start;
 			break;
 		case FLT_REG_FDT:
 			ha->flt_region_fdt = start;
 			break;
 		case FLT_REG_NPIV_CONF_0:
-			if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+			if (ha->flags.port0)
 				ha->flt_region_npiv_conf = start;
 			break;
 		case FLT_REG_NPIV_CONF_1:
-			if (PCI_FUNC(ha->pdev->devfn) & 1)
+			if (!ha->flags.port0)
 				ha->flt_region_npiv_conf = start;
 			break;
+		case FLT_REG_GOLD_FW:
+			ha->flt_region_gold_fw = start;
+			break;
 		}
 	}
 	goto done;
@@ -744,12 +748,12 @@
 	ha->flt_region_fw = def_fw[def];
 	ha->flt_region_boot = def_boot[def];
 	ha->flt_region_vpd_nvram = def_vpd_nvram[def];
-	ha->flt_region_vpd = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+	ha->flt_region_vpd = ha->flags.port0 ?
 	    def_vpd0[def]: def_vpd1[def];
-	ha->flt_region_nvram = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+	ha->flt_region_nvram = ha->flags.port0 ?
 	    def_nvram0[def]: def_nvram1[def];
 	ha->flt_region_fdt = def_fdt[def];
-	ha->flt_region_npiv_conf = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+	ha->flt_region_npiv_conf = ha->flags.port0 ?
 	    def_npiv_conf0[def]: def_npiv_conf1[def];
 done:
 	DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "
@@ -924,6 +928,8 @@
 		struct fc_vport_identifiers vid;
 		struct fc_vport *vport;
 
+		memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
+
 		flags = le16_to_cpu(entry->flags);
 		if (flags == 0xffff)
 			continue;
@@ -937,9 +943,7 @@
 		vid.port_name = wwn_to_u64(entry->port_name);
 		vid.node_name = wwn_to_u64(entry->node_name);
 
-		memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
-
-		DEBUG2(qla_printk(KERN_DEBUG, ha, "NPIV[%02x]: wwpn=%llx "
+		DEBUG2(qla_printk(KERN_INFO, ha, "NPIV[%02x]: wwpn=%llx "
 			"wwnn=%llx vf_id=0x%x Q_qos=0x%x F_qos=0x%x.\n", cnt,
 			vid.port_name, vid.node_name, le16_to_cpu(entry->vf_id),
 			entry->q_qos, entry->f_qos));
@@ -955,7 +959,6 @@
 	}
 done:
 	kfree(data);
-	ha->npiv_info = NULL;
 }
 
 static int
@@ -1079,8 +1082,9 @@
 				    0xff0000) | ((fdata >> 16) & 0xff));
 			ret = qla24xx_erase_sector(vha, fdata);
 			if (ret != QLA_SUCCESS) {
-				DEBUG9(qla_printk("Unable to erase sector: "
-				    "address=%x.\n", faddr));
+				DEBUG9(qla_printk(KERN_WARNING, ha,
+				    "Unable to erase sector: address=%x.\n",
+				    faddr));
 				break;
 			}
 		}
@@ -1240,8 +1244,9 @@
 		ret = qla24xx_write_flash_dword(ha,
 		    nvram_data_addr(ha, naddr), cpu_to_le32(*dwptr));
 		if (ret != QLA_SUCCESS) {
-			DEBUG9(qla_printk("Unable to program nvram address=%x "
-			    "data=%x.\n", naddr, *dwptr));
+			DEBUG9(qla_printk(KERN_WARNING, ha,
+			    "Unable to program nvram address=%x data=%x.\n",
+			    naddr, *dwptr));
 			break;
 		}
 	}
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 19d1afc..b63feaf 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.01-k1"
+#define QLA2XXX_VERSION      "8.03.01-k3"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 166417a..2de5f3a 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1225,8 +1225,8 @@
  * @starget:	SCSI target pointer
  * @lun:	SCSI Logical Unit Number
  *
- * Description: Looks up the scsi_device with the specified @channel, @id, @lun
- * for a given host.  The returned scsi_device has an additional reference that
+ * Description: Looks up the scsi_device with the specified @lun for a given
+ * @starget.  The returned scsi_device has an additional reference that
  * needs to be released with scsi_device_put once you're done with it.
  **/
 struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget,
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 213123b..41a2177 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -887,7 +887,7 @@
 static sector_t get_sdebug_capacity(void)
 {
 	if (scsi_debug_virtual_gb > 0)
-		return 2048 * 1024 * scsi_debug_virtual_gb;
+		return 2048 * 1024 * (sector_t)scsi_debug_virtual_gb;
 	else
 		return sdebug_store_sectors;
 }
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 0c2c73b..a168935 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -641,9 +641,9 @@
 /**
  * scsi_eh_restore_cmnd  - Restore a scsi command info as part of error recory
  * @scmd:       SCSI command structure to restore
- * @ses:        saved information from a coresponding call to scsi_prep_eh_cmnd
+ * @ses:        saved information from a coresponding call to scsi_eh_prep_cmnd
  *
- * Undo any damage done by above scsi_prep_eh_cmnd().
+ * Undo any damage done by above scsi_eh_prep_cmnd().
  */
 void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
 {
@@ -1451,28 +1451,21 @@
  * @sdev:	SCSI device to prevent medium removal
  *
  * Locking:
- * 	We must be called from process context; scsi_allocate_request()
- * 	may sleep.
+ * 	We must be called from process context.
  *
  * Notes:
  * 	We queue up an asynchronous "ALLOW MEDIUM REMOVAL" request on the
  * 	head of the devices request queue, and continue.
- *
- * Bugs:
- * 	scsi_allocate_request() may sleep waiting for existing requests to
- * 	be processed.  However, since we haven't kicked off any request
- * 	processing for this host, this may deadlock.
- *
- *	If scsi_allocate_request() fails for what ever reason, we
- *	completely forget to lock the door.
  */
 static void scsi_eh_lock_door(struct scsi_device *sdev)
 {
 	struct request *req;
 
+	/*
+	 * blk_get_request with GFP_KERNEL (__GFP_WAIT) sleeps until a
+	 * request becomes available
+	 */
 	req = blk_get_request(sdev->request_queue, READ, GFP_KERNEL);
-	if (!req)
-		return;
 
 	req->cmd[0] = ALLOW_MEDIUM_REMOVAL;
 	req->cmd[1] = 0;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index dd3f9d2..30f3275 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2412,20 +2412,18 @@
 scsi_internal_device_unblock(struct scsi_device *sdev)
 {
 	struct request_queue *q = sdev->request_queue; 
-	int err;
 	unsigned long flags;
 	
 	/* 
 	 * Try to transition the scsi device to SDEV_RUNNING
 	 * and goose the device queue if successful.  
 	 */
-	err = scsi_device_set_state(sdev, SDEV_RUNNING);
-	if (err) {
-		err = scsi_device_set_state(sdev, SDEV_CREATED);
-
-		if (err)
-			return err;
-	}
+	if (sdev->sdev_state == SDEV_BLOCK)
+		sdev->sdev_state = SDEV_RUNNING;
+	else if (sdev->sdev_state == SDEV_CREATED_BLOCK)
+		sdev->sdev_state = SDEV_CREATED;
+	else
+		return -EINVAL;
 
 	spin_lock_irqsave(q->queue_lock, flags);
 	blk_start_queue(q);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index e2b50d8..c447838 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -115,12 +115,12 @@
 		 "REPORT LUNS maximum number of LUNS received (should be"
 		 " between 1 and 16384)");
 
-static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ+3;
+static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ + 18;
 
 module_param_named(inq_timeout, scsi_inq_timeout, uint, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(inq_timeout, 
 		 "Timeout (in seconds) waiting for devices to answer INQUIRY."
-		 " Default is 5. Some non-compliant devices need more.");
+		 " Default is 20. Some devices may need more; most need less.");
 
 /* This lock protects only this list */
 static DEFINE_SPINLOCK(async_scan_lock);
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 0a2ce7b..f3e6646 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -37,7 +37,6 @@
 #define ISCSI_TRANSPORT_VERSION "2.0-870"
 
 struct iscsi_internal {
-	int daemon_pid;
 	struct scsi_transport_template t;
 	struct iscsi_transport *iscsi_transport;
 	struct list_head list;
@@ -938,23 +937,9 @@
 }
 
 static int
-iscsi_broadcast_skb(struct sk_buff *skb, gfp_t gfp)
+iscsi_multicast_skb(struct sk_buff *skb, uint32_t group, gfp_t gfp)
 {
-	return netlink_broadcast(nls, skb, 0, 1, gfp);
-}
-
-static int
-iscsi_unicast_skb(struct sk_buff *skb, int pid)
-{
-	int rc;
-
-	rc = netlink_unicast(nls, skb, pid, MSG_DONTWAIT);
-	if (rc < 0) {
-		printk(KERN_ERR "iscsi: can not unicast skb (%d)\n", rc);
-		return rc;
-	}
-
-	return 0;
+	return nlmsg_multicast(nls, skb, 0, group, gfp);
 }
 
 int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
@@ -980,7 +965,7 @@
 		return -ENOMEM;
 	}
 
-	nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+	nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
 	ev = NLMSG_DATA(nlh);
 	memset(ev, 0, sizeof(*ev));
 	ev->transport_handle = iscsi_handle(conn->transport);
@@ -991,10 +976,45 @@
 	memcpy(pdu, hdr, sizeof(struct iscsi_hdr));
 	memcpy(pdu + sizeof(struct iscsi_hdr), data, data_size);
 
-	return iscsi_unicast_skb(skb, priv->daemon_pid);
+	return iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_ATOMIC);
 }
 EXPORT_SYMBOL_GPL(iscsi_recv_pdu);
 
+int iscsi_offload_mesg(struct Scsi_Host *shost,
+		       struct iscsi_transport *transport, uint32_t type,
+		       char *data, uint16_t data_size)
+{
+	struct nlmsghdr	*nlh;
+	struct sk_buff *skb;
+	struct iscsi_uevent *ev;
+	int len = NLMSG_SPACE(sizeof(*ev) + data_size);
+
+	skb = alloc_skb(len, GFP_NOIO);
+	if (!skb) {
+		printk(KERN_ERR "can not deliver iscsi offload message:OOM\n");
+		return -ENOMEM;
+	}
+
+	nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
+	ev = NLMSG_DATA(nlh);
+	memset(ev, 0, sizeof(*ev));
+	ev->type = type;
+	ev->transport_handle = iscsi_handle(transport);
+	switch (type) {
+	case ISCSI_KEVENT_PATH_REQ:
+		ev->r.req_path.host_no = shost->host_no;
+		break;
+	case ISCSI_KEVENT_IF_DOWN:
+		ev->r.notify_if_down.host_no = shost->host_no;
+		break;
+	}
+
+	memcpy((char *)ev + sizeof(*ev), data, data_size);
+
+	return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_NOIO);
+}
+EXPORT_SYMBOL_GPL(iscsi_offload_mesg);
+
 void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error)
 {
 	struct nlmsghdr	*nlh;
@@ -1014,7 +1034,7 @@
 		return;
 	}
 
-	nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+	nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
 	ev = NLMSG_DATA(nlh);
 	ev->transport_handle = iscsi_handle(conn->transport);
 	ev->type = ISCSI_KEVENT_CONN_ERROR;
@@ -1022,7 +1042,7 @@
 	ev->r.connerror.cid = conn->cid;
 	ev->r.connerror.sid = iscsi_conn_get_sid(conn);
 
-	iscsi_broadcast_skb(skb, GFP_ATOMIC);
+	iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_ATOMIC);
 
 	iscsi_cls_conn_printk(KERN_INFO, conn, "detected conn error (%d)\n",
 			      error);
@@ -1030,8 +1050,8 @@
 EXPORT_SYMBOL_GPL(iscsi_conn_error_event);
 
 static int
-iscsi_if_send_reply(int pid, int seq, int type, int done, int multi,
-		      void *payload, int size)
+iscsi_if_send_reply(uint32_t group, int seq, int type, int done, int multi,
+		    void *payload, int size)
 {
 	struct sk_buff	*skb;
 	struct nlmsghdr	*nlh;
@@ -1045,10 +1065,10 @@
 		return -ENOMEM;
 	}
 
-	nlh = __nlmsg_put(skb, pid, seq, t, (len - sizeof(*nlh)), 0);
+	nlh = __nlmsg_put(skb, 0, 0, t, (len - sizeof(*nlh)), 0);
 	nlh->nlmsg_flags = flags;
 	memcpy(NLMSG_DATA(nlh), payload, size);
-	return iscsi_unicast_skb(skb, pid);
+	return iscsi_multicast_skb(skb, group, GFP_ATOMIC);
 }
 
 static int
@@ -1085,7 +1105,7 @@
 			return -ENOMEM;
 		}
 
-		nlhstat = __nlmsg_put(skbstat, priv->daemon_pid, 0, 0,
+		nlhstat = __nlmsg_put(skbstat, 0, 0, 0,
 				      (len - sizeof(*nlhstat)), 0);
 		evstat = NLMSG_DATA(nlhstat);
 		memset(evstat, 0, sizeof(*evstat));
@@ -1109,7 +1129,8 @@
 		skb_trim(skbstat, NLMSG_ALIGN(actual_size));
 		nlhstat->nlmsg_len = actual_size;
 
-		err = iscsi_unicast_skb(skbstat, priv->daemon_pid);
+		err = iscsi_multicast_skb(skbstat, ISCSI_NL_GRP_ISCSID,
+					  GFP_ATOMIC);
 	} while (err < 0 && err != -ECONNREFUSED);
 
 	return err;
@@ -1143,7 +1164,7 @@
 		return -ENOMEM;
 	}
 
-	nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+	nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
 	ev = NLMSG_DATA(nlh);
 	ev->transport_handle = iscsi_handle(session->transport);
 
@@ -1172,7 +1193,7 @@
 	 * this will occur if the daemon is not up, so we just warn
 	 * the user and when the daemon is restarted it will handle it
 	 */
-	rc = iscsi_broadcast_skb(skb, GFP_KERNEL);
+	rc = iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_KERNEL);
 	if (rc == -ESRCH)
 		iscsi_cls_session_printk(KERN_ERR, session,
 					 "Cannot notify userspace of session "
@@ -1268,26 +1289,54 @@
 	return err;
 }
 
+static int iscsi_if_ep_connect(struct iscsi_transport *transport,
+			       struct iscsi_uevent *ev, int msg_type)
+{
+	struct iscsi_endpoint *ep;
+	struct sockaddr *dst_addr;
+	struct Scsi_Host *shost = NULL;
+	int non_blocking, err = 0;
+
+	if (!transport->ep_connect)
+		return -EINVAL;
+
+	if (msg_type == ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST) {
+		shost = scsi_host_lookup(ev->u.ep_connect_through_host.host_no);
+		if (!shost) {
+			printk(KERN_ERR "ep connect failed. Could not find "
+			       "host no %u\n",
+			       ev->u.ep_connect_through_host.host_no);
+			return -ENODEV;
+		}
+		non_blocking = ev->u.ep_connect_through_host.non_blocking;
+	} else
+		non_blocking = ev->u.ep_connect.non_blocking;
+
+	dst_addr = (struct sockaddr *)((char*)ev + sizeof(*ev));
+	ep = transport->ep_connect(shost, dst_addr, non_blocking);
+	if (IS_ERR(ep)) {
+		err = PTR_ERR(ep);
+		goto release_host;
+	}
+
+	ev->r.ep_connect_ret.handle = ep->id;
+release_host:
+	if (shost)
+		scsi_host_put(shost);
+	return err;
+}
+
 static int
 iscsi_if_transport_ep(struct iscsi_transport *transport,
 		      struct iscsi_uevent *ev, int msg_type)
 {
 	struct iscsi_endpoint *ep;
-	struct sockaddr *dst_addr;
 	int rc = 0;
 
 	switch (msg_type) {
+	case ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST:
 	case ISCSI_UEVENT_TRANSPORT_EP_CONNECT:
-		if (!transport->ep_connect)
-			return -EINVAL;
-
-		dst_addr = (struct sockaddr *)((char*)ev + sizeof(*ev));
-		ep = transport->ep_connect(dst_addr,
-					   ev->u.ep_connect.non_blocking);
-		if (IS_ERR(ep))
-			return PTR_ERR(ep);
-
-		ev->r.ep_connect_ret.handle = ep->id;
+		rc = iscsi_if_ep_connect(transport, ev, msg_type);
 		break;
 	case ISCSI_UEVENT_TRANSPORT_EP_POLL:
 		if (!transport->ep_poll)
@@ -1365,7 +1414,31 @@
 }
 
 static int
-iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
+iscsi_set_path(struct iscsi_transport *transport, struct iscsi_uevent *ev)
+{
+	struct Scsi_Host *shost;
+	struct iscsi_path *params;
+	int err;
+
+	if (!transport->set_path)
+		return -ENOSYS;
+
+	shost = scsi_host_lookup(ev->u.set_path.host_no);
+	if (!shost) {
+		printk(KERN_ERR "set path could not find host no %u\n",
+		       ev->u.set_path.host_no);
+		return -ENODEV;
+	}
+
+	params = (struct iscsi_path *)((char *)ev + sizeof(*ev));
+	err = transport->set_path(shost, params);
+
+	scsi_host_put(shost);
+	return err;
+}
+
+static int
+iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group)
 {
 	int err = 0;
 	struct iscsi_uevent *ev = NLMSG_DATA(nlh);
@@ -1375,6 +1448,11 @@
 	struct iscsi_cls_conn *conn;
 	struct iscsi_endpoint *ep = NULL;
 
+	if (nlh->nlmsg_type == ISCSI_UEVENT_PATH_UPDATE)
+		*group = ISCSI_NL_GRP_UIP;
+	else
+		*group = ISCSI_NL_GRP_ISCSID;
+
 	priv = iscsi_if_transport_lookup(iscsi_ptr(ev->transport_handle));
 	if (!priv)
 		return -EINVAL;
@@ -1383,8 +1461,6 @@
 	if (!try_module_get(transport->owner))
 		return -EINVAL;
 
-	priv->daemon_pid = NETLINK_CREDS(skb)->pid;
-
 	switch (nlh->nlmsg_type) {
 	case ISCSI_UEVENT_CREATE_SESSION:
 		err = iscsi_if_create_session(priv, ep, ev,
@@ -1469,6 +1545,7 @@
 	case ISCSI_UEVENT_TRANSPORT_EP_CONNECT:
 	case ISCSI_UEVENT_TRANSPORT_EP_POLL:
 	case ISCSI_UEVENT_TRANSPORT_EP_DISCONNECT:
+	case ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST:
 		err = iscsi_if_transport_ep(transport, ev, nlh->nlmsg_type);
 		break;
 	case ISCSI_UEVENT_TGT_DSCVR:
@@ -1477,6 +1554,9 @@
 	case ISCSI_UEVENT_SET_HOST_PARAM:
 		err = iscsi_set_host_param(transport, ev);
 		break;
+	case ISCSI_UEVENT_PATH_UPDATE:
+		err = iscsi_set_path(transport, ev);
+		break;
 	default:
 		err = -ENOSYS;
 		break;
@@ -1499,6 +1579,7 @@
 		uint32_t rlen;
 		struct nlmsghdr	*nlh;
 		struct iscsi_uevent *ev;
+		uint32_t group;
 
 		nlh = nlmsg_hdr(skb);
 		if (nlh->nlmsg_len < sizeof(*nlh) ||
@@ -1511,7 +1592,7 @@
 		if (rlen > skb->len)
 			rlen = skb->len;
 
-		err = iscsi_if_recv_msg(skb, nlh);
+		err = iscsi_if_recv_msg(skb, nlh, &group);
 		if (err) {
 			ev->type = ISCSI_KEVENT_IF_ERROR;
 			ev->iferror = err;
@@ -1525,8 +1606,7 @@
 			 */
 			if (ev->type == ISCSI_UEVENT_GET_STATS && !err)
 				break;
-			err = iscsi_if_send_reply(
-				NETLINK_CREDS(skb)->pid, nlh->nlmsg_seq,
+			err = iscsi_if_send_reply(group, nlh->nlmsg_seq,
 				nlh->nlmsg_type, 0, 0, ev, sizeof(*ev));
 		} while (err < 0 && err != -ECONNREFUSED);
 		skb_pull(skb, rlen);
@@ -1774,7 +1854,6 @@
 	if (!priv)
 		return NULL;
 	INIT_LIST_HEAD(&priv->list);
-	priv->daemon_pid = -1;
 	priv->iscsi_transport = tt;
 	priv->t.user_scan = iscsi_user_scan;
 	priv->t.create_work_queue = 1;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index bcf3bd4..878b17a 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1902,24 +1902,6 @@
 	index = sdkp->index;
 	dev = &sdp->sdev_gendev;
 
-	if (!sdp->request_queue->rq_timeout) {
-		if (sdp->type != TYPE_MOD)
-			blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
-		else
-			blk_queue_rq_timeout(sdp->request_queue,
-					     SD_MOD_TIMEOUT);
-	}
-
-	device_initialize(&sdkp->dev);
-	sdkp->dev.parent = &sdp->sdev_gendev;
-	sdkp->dev.class = &sd_disk_class;
-	dev_set_name(&sdkp->dev, dev_name(&sdp->sdev_gendev));
-
-	if (device_add(&sdkp->dev))
-		goto out_free_index;
-
-	get_device(&sdp->sdev_gendev);
-
 	if (index < SD_MAX_DISKS) {
 		gd->major = sd_major((index & 0xf0) >> 4);
 		gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
@@ -1954,11 +1936,6 @@
 
 	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
 		  sdp->removable ? "removable " : "");
-
-	return;
-
- out_free_index:
-	ida_remove(&sd_index_ida, index);
 }
 
 /**
@@ -2026,6 +2003,24 @@
 	sdkp->openers = 0;
 	sdkp->previous_state = 1;
 
+	if (!sdp->request_queue->rq_timeout) {
+		if (sdp->type != TYPE_MOD)
+			blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
+		else
+			blk_queue_rq_timeout(sdp->request_queue,
+					     SD_MOD_TIMEOUT);
+	}
+
+	device_initialize(&sdkp->dev);
+	sdkp->dev.parent = &sdp->sdev_gendev;
+	sdkp->dev.class = &sd_disk_class;
+	dev_set_name(&sdkp->dev, dev_name(&sdp->sdev_gendev));
+
+	if (device_add(&sdkp->dev))
+		goto out_free_index;
+
+	get_device(&sdp->sdev_gendev);
+
 	async_schedule(sd_probe_async, sdkp);
 
 	return 0;
@@ -2055,8 +2050,10 @@
  **/
 static int sd_remove(struct device *dev)
 {
-	struct scsi_disk *sdkp = dev_get_drvdata(dev);
+	struct scsi_disk *sdkp;
 
+	async_synchronize_full();
+	sdkp = dev_get_drvdata(dev);
 	device_del(&sdkp->dev);
 	del_gendisk(sdkp->disk);
 	sd_shutdown(dev);
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 89bd438..b33d042 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -2964,7 +2964,7 @@
 			    !(STp->use_pf & PF_TESTED)) {
 				/* Try the other possible state of Page Format if not
 				   already tried */
-				STp->use_pf = !STp->use_pf | PF_TESTED;
+				STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED;
 				st_release_request(SRpnt);
 				SRpnt = NULL;
 				return st_int_ioctl(STp, cmd_in, arg);
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 583966e..45374d6 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -737,11 +737,14 @@
 	struct sym_hcb *np = sym_get_hcb(sdev->host);
 	struct sym_tcb *tp = &np->target[sdev->id];
 	struct sym_lcb *lp;
+	unsigned long flags;
+	int error;
 
 	if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN)
 		return -ENXIO;
 
-	tp->starget = sdev->sdev_target;
+	spin_lock_irqsave(np->s.host->host_lock, flags);
+
 	/*
 	 * Fail the device init if the device is flagged NOSCAN at BOOT in
 	 * the NVRAM.  This may speed up boot and maintain coherency with
@@ -753,26 +756,37 @@
 
 	if (tp->usrflags & SYM_SCAN_BOOT_DISABLED) {
 		tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED;
-		starget_printk(KERN_INFO, tp->starget,
+		starget_printk(KERN_INFO, sdev->sdev_target,
 				"Scan at boot disabled in NVRAM\n");
-		return -ENXIO;
+		error = -ENXIO;
+		goto out;
 	}
 
 	if (tp->usrflags & SYM_SCAN_LUNS_DISABLED) {
-		if (sdev->lun != 0)
-			return -ENXIO;
-		starget_printk(KERN_INFO, tp->starget,
+		if (sdev->lun != 0) {
+			error = -ENXIO;
+			goto out;
+		}
+		starget_printk(KERN_INFO, sdev->sdev_target,
 				"Multiple LUNs disabled in NVRAM\n");
 	}
 
 	lp = sym_alloc_lcb(np, sdev->id, sdev->lun);
-	if (!lp)
-		return -ENOMEM;
+	if (!lp) {
+		error = -ENOMEM;
+		goto out;
+	}
+	if (tp->nlcb == 1)
+		tp->starget = sdev->sdev_target;
 
 	spi_min_period(tp->starget) = tp->usr_period;
 	spi_max_width(tp->starget) = tp->usr_width;
 
-	return 0;
+	error = 0;
+out:
+	spin_unlock_irqrestore(np->s.host->host_lock, flags);
+
+	return error;
 }
 
 /*
@@ -819,12 +833,34 @@
 static void sym53c8xx_slave_destroy(struct scsi_device *sdev)
 {
 	struct sym_hcb *np = sym_get_hcb(sdev->host);
-	struct sym_lcb *lp = sym_lp(&np->target[sdev->id], sdev->lun);
+	struct sym_tcb *tp = &np->target[sdev->id];
+	struct sym_lcb *lp = sym_lp(tp, sdev->lun);
+	unsigned long flags;
 
-	if (lp->itlq_tbl)
-		sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK * 4, "ITLQ_TBL");
-	kfree(lp->cb_tags);
-	sym_mfree_dma(lp, sizeof(*lp), "LCB");
+	spin_lock_irqsave(np->s.host->host_lock, flags);
+
+	if (lp->busy_itlq || lp->busy_itl) {
+		/*
+		 * This really shouldn't happen, but we can't return an error
+		 * so let's try to stop all on-going I/O.
+		 */
+		starget_printk(KERN_WARNING, tp->starget,
+			       "Removing busy LCB (%d)\n", sdev->lun);
+		sym_reset_scsi_bus(np, 1);
+	}
+
+	if (sym_free_lcb(np, sdev->id, sdev->lun) == 0) {
+		/*
+		 * It was the last unit for this target.
+		 */
+		tp->head.sval        = 0;
+		tp->head.wval        = np->rv_scntl3;
+		tp->head.uval        = 0;
+		tp->tgoal.check_nego = 1;
+		tp->starget	     = NULL;
+	}
+
+	spin_unlock_irqrestore(np->s.host->host_lock, flags);
 }
 
 /*
@@ -890,6 +926,8 @@
 			if (!((uc->target >> t) & 1))
 				continue;
 			tp = &np->target[t];
+			if (!tp->nlcb)
+				continue;
 
 			switch (uc->cmd) {
 
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index ffa70d1..69ad494 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -1896,6 +1896,15 @@
 		tp->head.sval = 0;
 		tp->head.wval = np->rv_scntl3;
 		tp->head.uval = 0;
+		if (tp->lun0p)
+			tp->lun0p->to_clear = 0;
+		if (tp->lunmp) {
+			int ln;
+
+			for (ln = 1; ln < SYM_CONF_MAX_LUN; ln++)
+				if (tp->lunmp[ln])
+					tp->lunmp[ln]->to_clear = 0;
+		}
 	}
 
 	/*
@@ -4988,7 +4997,7 @@
 	 */
 	if (ln && !tp->lunmp) {
 		tp->lunmp = kcalloc(SYM_CONF_MAX_LUN, sizeof(struct sym_lcb *),
-				GFP_KERNEL);
+				GFP_ATOMIC);
 		if (!tp->lunmp)
 			goto fail;
 	}
@@ -5008,6 +5017,7 @@
 		tp->lun0p = lp;
 		tp->head.lun0_sa = cpu_to_scr(vtobus(lp));
 	}
+	tp->nlcb++;
 
 	/*
 	 *  Let the itl task point to error handling.
@@ -5085,6 +5095,43 @@
 }
 
 /*
+ *  Lun control block deallocation. Returns the number of valid remaing LCBs
+ *  for the target.
+ */
+int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln)
+{
+	struct sym_tcb *tp = &np->target[tn];
+	struct sym_lcb *lp = sym_lp(tp, ln);
+
+	tp->nlcb--;
+
+	if (ln) {
+		if (!tp->nlcb) {
+			kfree(tp->lunmp);
+			sym_mfree_dma(tp->luntbl, 256, "LUNTBL");
+			tp->lunmp = NULL;
+			tp->luntbl = NULL;
+			tp->head.luntbl_sa = cpu_to_scr(vtobus(np->badluntbl));
+		} else {
+			tp->luntbl[ln] = cpu_to_scr(vtobus(&np->badlun_sa));
+			tp->lunmp[ln] = NULL;
+		}
+	} else {
+		tp->lun0p = NULL;
+		tp->head.lun0_sa = cpu_to_scr(vtobus(&np->badlun_sa));
+	}
+
+	if (lp->itlq_tbl) {
+		sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
+		kfree(lp->cb_tags);
+	}
+
+	sym_mfree_dma(lp, sizeof(*lp), "LCB");
+
+	return tp->nlcb;
+}
+
+/*
  *  Queue a SCSI IO to the controller.
  */
 int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 9ebc870..053e63c 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -401,6 +401,7 @@
 	 *  An array of bus addresses is used on reselection.
 	 */
 	u32	*luntbl;	/* LCBs bus address table	*/
+	int	nlcb;		/* Number of valid LCBs (including LUN #0) */
 
 	/*
 	 *  LUN table used by the C code.
@@ -1065,6 +1066,7 @@
 struct sym_ccb *sym_get_ccb(struct sym_hcb *np, struct scsi_cmnd *cmd, u_char tag_order);
 void sym_free_ccb(struct sym_hcb *np, struct sym_ccb *cp);
 struct sym_lcb *sym_alloc_lcb(struct sym_hcb *np, u_char tn, u_char ln);
+int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln);
 int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp);
 int sym_abort_scsiio(struct sym_hcb *np, struct scsi_cmnd *ccb, int timed_out);
 int sym_reset_scsi_target(struct sym_hcb *np, int target);
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 35e8eb0..e4e4d43 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -354,7 +354,7 @@
 static int default_lcd_on __devinitdata = 1;
 
 #ifdef CONFIG_MTRR
-static int mtrr = 1;
+static bool mtrr = true;
 #endif
 
 #ifdef CONFIG_PMAC_BACKLIGHT
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 83c5cef..da7c01b 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1736,10 +1736,8 @@
 
 #ifdef CONFIG_ARCH_SHARK
 	err = cyberpro_vl_probe();
-	if (!err) {
+	if (!err)
 		ret = 0;
-		__module_get(THIS_MODULE);
-	}
 #endif
 #ifdef CONFIG_PCI
 	err = pci_register_driver(&cyberpro_driver);
@@ -1749,14 +1747,15 @@
 
 	return ret ? err : 0;
 }
+module_init(cyber2000fb_init);
 
+#ifndef CONFIG_ARCH_SHARK
 static void __exit cyberpro_exit(void)
 {
 	pci_unregister_driver(&cyberpro_driver);
 }
-
-module_init(cyber2000fb_init);
 module_exit(cyberpro_exit);
+#endif
 
 MODULE_AUTHOR("Russell King");
 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index 421770b..ca5b464 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -45,7 +45,7 @@
 static int mtrr		__devinitdata = 3; /* enable mtrr by default */
 static int blank	= 1;		   /* enable blanking by default */
 static int ypan		= 1; 		 /* 0: scroll, 1: ypan, 2: ywrap */
-static int pmi_setpal	__devinitdata = 1; /* use PMI for palette changes */
+static bool pmi_setpal	__devinitdata = true; /* use PMI for palette changes */
 static int nocrtc	__devinitdata; /* ignore CRTC settings */
 static int noedid	__devinitdata; /* don't try DDC transfers */
 static int vram_remap	__devinitdata; /* set amt. of memory to be used */
@@ -2002,11 +2002,7 @@
 
 module_exit(uvesafb_exit);
 
-static int param_get_scroll(char *buffer, struct kernel_param *kp)
-{
-	return 0;
-}
-
+#define param_get_scroll NULL
 static int param_set_scroll(const char *val, struct kernel_param *kp)
 {
 	ypan = 0;
@@ -2017,6 +2013,8 @@
 		ypan = 1;
 	else if (!strcmp(val, "ywrap"))
 		ypan = 2;
+	else
+		return -EINVAL;
 
 	return 0;
 }
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 018c070..3a43ebf 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -31,21 +31,37 @@
 	return sprintf(buf, "virtio:d%08Xv%08X\n",
 		       dev->id.device, dev->id.vendor);
 }
+static ssize_t features_show(struct device *_d,
+			     struct device_attribute *attr, char *buf)
+{
+	struct virtio_device *dev = container_of(_d, struct virtio_device, dev);
+	unsigned int i;
+	ssize_t len = 0;
+
+	/* We actually represent this as a bitstring, as it could be
+	 * arbitrary length in future. */
+	for (i = 0; i < ARRAY_SIZE(dev->features)*BITS_PER_LONG; i++)
+		len += sprintf(buf+len, "%c",
+			       test_bit(i, dev->features) ? '1' : '0');
+	len += sprintf(buf+len, "\n");
+	return len;
+}
 static struct device_attribute virtio_dev_attrs[] = {
 	__ATTR_RO(device),
 	__ATTR_RO(vendor),
 	__ATTR_RO(status),
 	__ATTR_RO(modalias),
+	__ATTR_RO(features),
 	__ATTR_NULL
 };
 
 static inline int virtio_id_match(const struct virtio_device *dev,
 				  const struct virtio_device_id *id)
 {
-	if (id->device != dev->id.device)
+	if (id->device != dev->id.device && id->device != VIRTIO_DEV_ANY_ID)
 		return 0;
 
-	return id->vendor == VIRTIO_DEV_ANY_ID || id->vendor != dev->id.vendor;
+	return id->vendor == VIRTIO_DEV_ANY_ID || id->vendor == dev->id.vendor;
 }
 
 /* This looks through all the IDs a driver claims to support.  If any of them
@@ -118,13 +134,14 @@
 		if (device_features & (1 << i))
 			set_bit(i, dev->features);
 
+	dev->config->finalize_features(dev);
+
 	err = drv->probe(dev);
 	if (err)
 		add_status(dev, VIRTIO_CONFIG_S_FAILED);
-	else {
-		dev->config->finalize_features(dev);
+	else
 		add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
-	}
+
 	return err;
 }
 
@@ -185,6 +202,8 @@
 	/* Acknowledge that we've seen the device. */
 	add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
 
+	INIT_LIST_HEAD(&dev->vqs);
+
 	/* device_register() causes the bus infrastructure to look for a
 	 * matching driver. */
 	err = device_register(&dev->dev);
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 9c76a06..26b2782 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -204,6 +204,9 @@
 static int virtballoon_probe(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb;
+	struct virtqueue *vqs[2];
+	vq_callback_t *callbacks[] = { balloon_ack, balloon_ack };
+	const char *names[] = { "inflate", "deflate" };
 	int err;
 
 	vdev->priv = vb = kmalloc(sizeof(*vb), GFP_KERNEL);
@@ -218,22 +221,17 @@
 	vb->vdev = vdev;
 
 	/* We expect two virtqueues. */
-	vb->inflate_vq = vdev->config->find_vq(vdev, 0, balloon_ack);
-	if (IS_ERR(vb->inflate_vq)) {
-		err = PTR_ERR(vb->inflate_vq);
+	err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names);
+	if (err)
 		goto out_free_vb;
-	}
 
-	vb->deflate_vq = vdev->config->find_vq(vdev, 1, balloon_ack);
-	if (IS_ERR(vb->deflate_vq)) {
-		err = PTR_ERR(vb->deflate_vq);
-		goto out_del_inflate_vq;
-	}
+	vb->inflate_vq = vqs[0];
+	vb->deflate_vq = vqs[1];
 
 	vb->thread = kthread_run(balloon, vb, "vballoon");
 	if (IS_ERR(vb->thread)) {
 		err = PTR_ERR(vb->thread);
-		goto out_del_deflate_vq;
+		goto out_del_vqs;
 	}
 
 	vb->tell_host_first
@@ -241,10 +239,8 @@
 
 	return 0;
 
-out_del_deflate_vq:
-	vdev->config->del_vq(vb->deflate_vq);
-out_del_inflate_vq:
-	vdev->config->del_vq(vb->inflate_vq);
+out_del_vqs:
+	vdev->config->del_vqs(vdev);
 out_free_vb:
 	kfree(vb);
 out:
@@ -264,8 +260,7 @@
 	/* Now we reset the device so we can clean up the queues. */
 	vdev->config->reset(vdev);
 
-	vdev->config->del_vq(vb->deflate_vq);
-	vdev->config->del_vq(vb->inflate_vq);
+	vdev->config->del_vqs(vdev);
 	kfree(vb);
 }
 
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 330aacb..193c8f0 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -42,6 +42,26 @@
 	/* a list of queues so we can dispatch IRQs */
 	spinlock_t lock;
 	struct list_head virtqueues;
+
+	/* MSI-X support */
+	int msix_enabled;
+	int intx_enabled;
+	struct msix_entry *msix_entries;
+	/* Name strings for interrupts. This size should be enough,
+	 * and I'm too lazy to allocate each name separately. */
+	char (*msix_names)[256];
+	/* Number of available vectors */
+	unsigned msix_vectors;
+	/* Vectors allocated */
+	unsigned msix_used_vectors;
+};
+
+/* Constants for MSI-X */
+/* Use first vector for configuration changes, second and the rest for
+ * virtqueues Thus, we need at least 2 vectors for MSI. */
+enum {
+	VP_MSIX_CONFIG_VECTOR = 0,
+	VP_MSIX_VQ_VECTOR = 1,
 };
 
 struct virtio_pci_vq_info
@@ -60,6 +80,9 @@
 
 	/* the list node for the virtqueues list */
 	struct list_head node;
+
+	/* MSI-X vector (or none) */
+	unsigned vector;
 };
 
 /* Qumranet donated their vendor ID for devices 0x1000 thru 0x10FF. */
@@ -109,7 +132,8 @@
 		   void *buf, unsigned len)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	void __iomem *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+	void __iomem *ioaddr = vp_dev->ioaddr +
+				VIRTIO_PCI_CONFIG(vp_dev) + offset;
 	u8 *ptr = buf;
 	int i;
 
@@ -123,7 +147,8 @@
 		   const void *buf, unsigned len)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	void __iomem *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+	void __iomem *ioaddr = vp_dev->ioaddr +
+				VIRTIO_PCI_CONFIG(vp_dev) + offset;
 	const u8 *ptr = buf;
 	int i;
 
@@ -164,37 +189,26 @@
 	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY);
 }
 
-/* A small wrapper to also acknowledge the interrupt when it's handled.
- * I really need an EIO hook for the vring so I can ack the interrupt once we
- * know that we'll be handling the IRQ but before we invoke the callback since
- * the callback may notify the host which results in the host attempting to
- * raise an interrupt that we would then mask once we acknowledged the
- * interrupt. */
-static irqreturn_t vp_interrupt(int irq, void *opaque)
+/* Handle a configuration change: Tell driver if it wants to know. */
+static irqreturn_t vp_config_changed(int irq, void *opaque)
+{
+	struct virtio_pci_device *vp_dev = opaque;
+	struct virtio_driver *drv;
+	drv = container_of(vp_dev->vdev.dev.driver,
+			   struct virtio_driver, driver);
+
+	if (drv && drv->config_changed)
+		drv->config_changed(&vp_dev->vdev);
+	return IRQ_HANDLED;
+}
+
+/* Notify all virtqueues on an interrupt. */
+static irqreturn_t vp_vring_interrupt(int irq, void *opaque)
 {
 	struct virtio_pci_device *vp_dev = opaque;
 	struct virtio_pci_vq_info *info;
 	irqreturn_t ret = IRQ_NONE;
 	unsigned long flags;
-	u8 isr;
-
-	/* reading the ISR has the effect of also clearing it so it's very
-	 * important to save off the value. */
-	isr = ioread8(vp_dev->ioaddr + VIRTIO_PCI_ISR);
-
-	/* It's definitely not us if the ISR was not high */
-	if (!isr)
-		return IRQ_NONE;
-
-	/* Configuration change?  Tell driver if it wants to know. */
-	if (isr & VIRTIO_PCI_ISR_CONFIG) {
-		struct virtio_driver *drv;
-		drv = container_of(vp_dev->vdev.dev.driver,
-				   struct virtio_driver, driver);
-
-		if (drv && drv->config_changed)
-			drv->config_changed(&vp_dev->vdev);
-	}
 
 	spin_lock_irqsave(&vp_dev->lock, flags);
 	list_for_each_entry(info, &vp_dev->virtqueues, node) {
@@ -206,15 +220,157 @@
 	return ret;
 }
 
-/* the config->find_vq() implementation */
+/* A small wrapper to also acknowledge the interrupt when it's handled.
+ * I really need an EIO hook for the vring so I can ack the interrupt once we
+ * know that we'll be handling the IRQ but before we invoke the callback since
+ * the callback may notify the host which results in the host attempting to
+ * raise an interrupt that we would then mask once we acknowledged the
+ * interrupt. */
+static irqreturn_t vp_interrupt(int irq, void *opaque)
+{
+	struct virtio_pci_device *vp_dev = opaque;
+	u8 isr;
+
+	/* reading the ISR has the effect of also clearing it so it's very
+	 * important to save off the value. */
+	isr = ioread8(vp_dev->ioaddr + VIRTIO_PCI_ISR);
+
+	/* It's definitely not us if the ISR was not high */
+	if (!isr)
+		return IRQ_NONE;
+
+	/* Configuration change?  Tell driver if it wants to know. */
+	if (isr & VIRTIO_PCI_ISR_CONFIG)
+		vp_config_changed(irq, opaque);
+
+	return vp_vring_interrupt(irq, opaque);
+}
+
+static void vp_free_vectors(struct virtio_device *vdev)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	int i;
+
+	if (vp_dev->intx_enabled) {
+		free_irq(vp_dev->pci_dev->irq, vp_dev);
+		vp_dev->intx_enabled = 0;
+	}
+
+	for (i = 0; i < vp_dev->msix_used_vectors; ++i)
+		free_irq(vp_dev->msix_entries[i].vector, vp_dev);
+	vp_dev->msix_used_vectors = 0;
+
+	if (vp_dev->msix_enabled) {
+		/* Disable the vector used for configuration */
+		iowrite16(VIRTIO_MSI_NO_VECTOR,
+			  vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+		/* Flush the write out to device */
+		ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+
+		vp_dev->msix_enabled = 0;
+		pci_disable_msix(vp_dev->pci_dev);
+	}
+}
+
+static int vp_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
+			  int *options, int noptions)
+{
+	int i;
+	for (i = 0; i < noptions; ++i)
+		if (!pci_enable_msix(dev, entries, options[i]))
+			return options[i];
+	return -EBUSY;
+}
+
+static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	const char *name = dev_name(&vp_dev->vdev.dev);
+	unsigned i, v;
+	int err = -ENOMEM;
+	/* We want at most one vector per queue and one for config changes.
+	 * Fallback to separate vectors for config and a shared for queues.
+	 * Finally fall back to regular interrupts. */
+	int options[] = { max_vqs + 1, 2 };
+	int nvectors = max(options[0], options[1]);
+
+	vp_dev->msix_entries = kmalloc(nvectors * sizeof *vp_dev->msix_entries,
+				       GFP_KERNEL);
+	if (!vp_dev->msix_entries)
+		goto error_entries;
+	vp_dev->msix_names = kmalloc(nvectors * sizeof *vp_dev->msix_names,
+				     GFP_KERNEL);
+	if (!vp_dev->msix_names)
+		goto error_names;
+
+	for (i = 0; i < nvectors; ++i)
+		vp_dev->msix_entries[i].entry = i;
+
+	err = vp_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries,
+			     options, ARRAY_SIZE(options));
+	if (err < 0) {
+		/* Can't allocate enough MSI-X vectors, use regular interrupt */
+		vp_dev->msix_vectors = 0;
+		err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
+				  IRQF_SHARED, name, vp_dev);
+		if (err)
+			goto error_irq;
+		vp_dev->intx_enabled = 1;
+	} else {
+		vp_dev->msix_vectors = err;
+		vp_dev->msix_enabled = 1;
+
+		/* Set the vector used for configuration */
+		v = vp_dev->msix_used_vectors;
+		snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
+			 "%s-config", name);
+		err = request_irq(vp_dev->msix_entries[v].vector,
+				  vp_config_changed, 0, vp_dev->msix_names[v],
+				  vp_dev);
+		if (err)
+			goto error_irq;
+		++vp_dev->msix_used_vectors;
+
+		iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+		/* Verify we had enough resources to assign the vector */
+		v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+		if (v == VIRTIO_MSI_NO_VECTOR) {
+			err = -EBUSY;
+			goto error_irq;
+		}
+	}
+
+	if (vp_dev->msix_vectors && vp_dev->msix_vectors != max_vqs + 1) {
+		/* Shared vector for all VQs */
+		v = vp_dev->msix_used_vectors;
+		snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
+			 "%s-virtqueues", name);
+		err = request_irq(vp_dev->msix_entries[v].vector,
+				  vp_vring_interrupt, 0, vp_dev->msix_names[v],
+				  vp_dev);
+		if (err)
+			goto error_irq;
+		++vp_dev->msix_used_vectors;
+	}
+	return 0;
+error_irq:
+	vp_free_vectors(vdev);
+	kfree(vp_dev->msix_names);
+error_names:
+	kfree(vp_dev->msix_entries);
+error_entries:
+	return err;
+}
+
 static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
-				    void (*callback)(struct virtqueue *vq))
+				    void (*callback)(struct virtqueue *vq),
+				    const char *name)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	struct virtio_pci_vq_info *info;
 	struct virtqueue *vq;
 	unsigned long flags, size;
-	u16 num;
+	u16 num, vector;
 	int err;
 
 	/* Select the queue we're interested in */
@@ -233,6 +389,7 @@
 
 	info->queue_index = index;
 	info->num = num;
+	info->vector = VIRTIO_MSI_NO_VECTOR;
 
 	size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
 	info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
@@ -247,7 +404,7 @@
 
 	/* create the vring */
 	vq = vring_new_virtqueue(info->num, VIRTIO_PCI_VRING_ALIGN,
-				 vdev, info->queue, vp_notify, callback);
+				 vdev, info->queue, vp_notify, callback, name);
 	if (!vq) {
 		err = -ENOMEM;
 		goto out_activate_queue;
@@ -256,12 +413,43 @@
 	vq->priv = info;
 	info->vq = vq;
 
+	/* allocate per-vq vector if available and necessary */
+	if (callback && vp_dev->msix_used_vectors < vp_dev->msix_vectors) {
+		vector = vp_dev->msix_used_vectors;
+		snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
+			 "%s-%s", dev_name(&vp_dev->vdev.dev), name);
+		err = request_irq(vp_dev->msix_entries[vector].vector,
+				  vring_interrupt, 0,
+				  vp_dev->msix_names[vector], vq);
+		if (err)
+			goto out_request_irq;
+		info->vector = vector;
+		++vp_dev->msix_used_vectors;
+	} else
+		vector = VP_MSIX_VQ_VECTOR;
+
+	 if (callback && vp_dev->msix_enabled) {
+		iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
+		vector = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
+		if (vector == VIRTIO_MSI_NO_VECTOR) {
+			err = -EBUSY;
+			goto out_assign;
+		}
+	}
+
 	spin_lock_irqsave(&vp_dev->lock, flags);
 	list_add(&info->node, &vp_dev->virtqueues);
 	spin_unlock_irqrestore(&vp_dev->lock, flags);
 
 	return vq;
 
+out_assign:
+	if (info->vector != VIRTIO_MSI_NO_VECTOR) {
+		free_irq(vp_dev->msix_entries[info->vector].vector, vq);
+		--vp_dev->msix_used_vectors;
+	}
+out_request_irq:
+	vring_del_virtqueue(vq);
 out_activate_queue:
 	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
 	free_pages_exact(info->queue, size);
@@ -270,21 +458,27 @@
 	return ERR_PTR(err);
 }
 
-/* the config->del_vq() implementation */
 static void vp_del_vq(struct virtqueue *vq)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
 	struct virtio_pci_vq_info *info = vq->priv;
-	unsigned long flags, size;
+	unsigned long size;
 
-	spin_lock_irqsave(&vp_dev->lock, flags);
-	list_del(&info->node);
-	spin_unlock_irqrestore(&vp_dev->lock, flags);
+	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+
+	if (info->vector != VIRTIO_MSI_NO_VECTOR)
+		free_irq(vp_dev->msix_entries[info->vector].vector, vq);
+
+	if (vp_dev->msix_enabled) {
+		iowrite16(VIRTIO_MSI_NO_VECTOR,
+			  vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
+		/* Flush the write out to device */
+		ioread8(vp_dev->ioaddr + VIRTIO_PCI_ISR);
+	}
 
 	vring_del_virtqueue(vq);
 
 	/* Select and deactivate the queue */
-	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
 	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
 
 	size = PAGE_ALIGN(vring_size(info->num, VIRTIO_PCI_VRING_ALIGN));
@@ -292,14 +486,57 @@
 	kfree(info);
 }
 
+/* the config->del_vqs() implementation */
+static void vp_del_vqs(struct virtio_device *vdev)
+{
+	struct virtqueue *vq, *n;
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		vp_del_vq(vq);
+
+	vp_free_vectors(vdev);
+}
+
+/* the config->find_vqs() implementation */
+static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+		       struct virtqueue *vqs[],
+		       vq_callback_t *callbacks[],
+		       const char *names[])
+{
+	int vectors = 0;
+	int i, err;
+
+	/* How many vectors would we like? */
+	for (i = 0; i < nvqs; ++i)
+		if (callbacks[i])
+			++vectors;
+
+	err = vp_request_vectors(vdev, vectors);
+	if (err)
+		goto error_request;
+
+	for (i = 0; i < nvqs; ++i) {
+		vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i]);
+		if (IS_ERR(vqs[i]))
+			goto error_find;
+	}
+	return 0;
+
+error_find:
+	vp_del_vqs(vdev);
+
+error_request:
+	return PTR_ERR(vqs[i]);
+}
+
 static struct virtio_config_ops virtio_pci_config_ops = {
 	.get		= vp_get,
 	.set		= vp_set,
 	.get_status	= vp_get_status,
 	.set_status	= vp_set_status,
 	.reset		= vp_reset,
-	.find_vq	= vp_find_vq,
-	.del_vq		= vp_del_vq,
+	.find_vqs	= vp_find_vqs,
+	.del_vqs	= vp_del_vqs,
 	.get_features	= vp_get_features,
 	.finalize_features = vp_finalize_features,
 };
@@ -310,7 +547,7 @@
 	struct virtio_pci_device *vp_dev = to_vp_device(dev);
 	struct pci_dev *pci_dev = vp_dev->pci_dev;
 
-	free_irq(pci_dev->irq, vp_dev);
+	vp_del_vqs(dev);
 	pci_set_drvdata(pci_dev, NULL);
 	pci_iounmap(pci_dev, vp_dev->ioaddr);
 	pci_release_regions(pci_dev);
@@ -369,21 +606,13 @@
 	vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
 	vp_dev->vdev.id.device = pci_dev->subsystem_device;
 
-	/* register a handler for the queue with the PCI device's interrupt */
-	err = request_irq(vp_dev->pci_dev->irq, vp_interrupt, IRQF_SHARED,
-			  dev_name(&vp_dev->vdev.dev), vp_dev);
-	if (err)
-		goto out_set_drvdata;
-
 	/* finally register the virtio device */
 	err = register_virtio_device(&vp_dev->vdev);
 	if (err)
-		goto out_req_irq;
+		goto out_set_drvdata;
 
 	return 0;
 
-out_req_irq:
-	free_irq(pci_dev->irq, vp_dev);
 out_set_drvdata:
 	pci_set_drvdata(pci_dev, NULL);
 	pci_iounmap(pci_dev, vp_dev->ioaddr);
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 5c52369..a882f26 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -23,21 +23,30 @@
 
 #ifdef DEBUG
 /* For development, we want to crash whenever the ring is screwed. */
-#define BAD_RING(_vq, fmt...)			\
-	do { dev_err(&(_vq)->vq.vdev->dev, fmt); BUG(); } while(0)
+#define BAD_RING(_vq, fmt, args...)				\
+	do {							\
+		dev_err(&(_vq)->vq.vdev->dev,			\
+			"%s:"fmt, (_vq)->vq.name, ##args);	\
+		BUG();						\
+	} while (0)
 /* Caller is supposed to guarantee no reentry. */
 #define START_USE(_vq)						\
 	do {							\
 		if ((_vq)->in_use)				\
-			panic("in_use = %i\n", (_vq)->in_use);	\
+			panic("%s:in_use = %i\n",		\
+			      (_vq)->vq.name, (_vq)->in_use);	\
 		(_vq)->in_use = __LINE__;			\
 		mb();						\
-	} while(0)
+	} while (0)
 #define END_USE(_vq) \
 	do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; mb(); } while(0)
 #else
-#define BAD_RING(_vq, fmt...)			\
-	do { dev_err(&_vq->vq.vdev->dev, fmt); (_vq)->broken = true; } while(0)
+#define BAD_RING(_vq, fmt, args...)				\
+	do {							\
+		dev_err(&_vq->vq.vdev->dev,			\
+			"%s:"fmt, (_vq)->vq.name, ##args);	\
+		(_vq)->broken = true;				\
+	} while (0)
 #define START_USE(vq)
 #define END_USE(vq)
 #endif
@@ -52,6 +61,9 @@
 	/* Other side has made a mess, don't try any more. */
 	bool broken;
 
+	/* Host supports indirect buffers */
+	bool indirect;
+
 	/* Number of free buffers */
 	unsigned int num_free;
 	/* Head of free buffer list. */
@@ -76,6 +88,55 @@
 
 #define to_vvq(_vq) container_of(_vq, struct vring_virtqueue, vq)
 
+/* Set up an indirect table of descriptors and add it to the queue. */
+static int vring_add_indirect(struct vring_virtqueue *vq,
+			      struct scatterlist sg[],
+			      unsigned int out,
+			      unsigned int in)
+{
+	struct vring_desc *desc;
+	unsigned head;
+	int i;
+
+	desc = kmalloc((out + in) * sizeof(struct vring_desc), GFP_ATOMIC);
+	if (!desc)
+		return vq->vring.num;
+
+	/* Transfer entries from the sg list into the indirect page */
+	for (i = 0; i < out; i++) {
+		desc[i].flags = VRING_DESC_F_NEXT;
+		desc[i].addr = sg_phys(sg);
+		desc[i].len = sg->length;
+		desc[i].next = i+1;
+		sg++;
+	}
+	for (; i < (out + in); i++) {
+		desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
+		desc[i].addr = sg_phys(sg);
+		desc[i].len = sg->length;
+		desc[i].next = i+1;
+		sg++;
+	}
+
+	/* Last one doesn't continue. */
+	desc[i-1].flags &= ~VRING_DESC_F_NEXT;
+	desc[i-1].next = 0;
+
+	/* We're about to use a buffer */
+	vq->num_free--;
+
+	/* Use a single buffer which doesn't continue */
+	head = vq->free_head;
+	vq->vring.desc[head].flags = VRING_DESC_F_INDIRECT;
+	vq->vring.desc[head].addr = virt_to_phys(desc);
+	vq->vring.desc[head].len = i * sizeof(struct vring_desc);
+
+	/* Update free pointer */
+	vq->free_head = vq->vring.desc[head].next;
+
+	return head;
+}
+
 static int vring_add_buf(struct virtqueue *_vq,
 			 struct scatterlist sg[],
 			 unsigned int out,
@@ -85,12 +146,21 @@
 	struct vring_virtqueue *vq = to_vvq(_vq);
 	unsigned int i, avail, head, uninitialized_var(prev);
 
+	START_USE(vq);
+
 	BUG_ON(data == NULL);
+
+	/* If the host supports indirect descriptor tables, and we have multiple
+	 * buffers, then go indirect. FIXME: tune this threshold */
+	if (vq->indirect && (out + in) > 1 && vq->num_free) {
+		head = vring_add_indirect(vq, sg, out, in);
+		if (head != vq->vring.num)
+			goto add_head;
+	}
+
 	BUG_ON(out + in > vq->vring.num);
 	BUG_ON(out + in == 0);
 
-	START_USE(vq);
-
 	if (vq->num_free < out + in) {
 		pr_debug("Can't add buf len %i - avail = %i\n",
 			 out + in, vq->num_free);
@@ -127,6 +197,7 @@
 	/* Update free pointer */
 	vq->free_head = i;
 
+add_head:
 	/* Set token. */
 	vq->data[head] = data;
 
@@ -170,6 +241,11 @@
 
 	/* Put back on free list: find end */
 	i = head;
+
+	/* Free the indirect table */
+	if (vq->vring.desc[i].flags & VRING_DESC_F_INDIRECT)
+		kfree(phys_to_virt(vq->vring.desc[i].addr));
+
 	while (vq->vring.desc[i].flags & VRING_DESC_F_NEXT) {
 		i = vq->vring.desc[i].next;
 		vq->num_free++;
@@ -284,7 +360,8 @@
 				      struct virtio_device *vdev,
 				      void *pages,
 				      void (*notify)(struct virtqueue *),
-				      void (*callback)(struct virtqueue *))
+				      void (*callback)(struct virtqueue *),
+				      const char *name)
 {
 	struct vring_virtqueue *vq;
 	unsigned int i;
@@ -303,14 +380,18 @@
 	vq->vq.callback = callback;
 	vq->vq.vdev = vdev;
 	vq->vq.vq_ops = &vring_vq_ops;
+	vq->vq.name = name;
 	vq->notify = notify;
 	vq->broken = false;
 	vq->last_used_idx = 0;
 	vq->num_added = 0;
+	list_add_tail(&vq->vq.list, &vdev->vqs);
 #ifdef DEBUG
 	vq->in_use = false;
 #endif
 
+	vq->indirect = virtio_has_feature(vdev, VIRTIO_RING_F_INDIRECT_DESC);
+
 	/* No callback?  Tell other side not to bother us. */
 	if (!callback)
 		vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
@@ -327,6 +408,7 @@
 
 void vring_del_virtqueue(struct virtqueue *vq)
 {
+	list_del(&vq->list);
 	kfree(to_vvq(vq));
 }
 EXPORT_SYMBOL_GPL(vring_del_virtqueue);
@@ -338,6 +420,8 @@
 
 	for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++) {
 		switch (i) {
+		case VIRTIO_RING_F_INDIRECT_DESC:
+			break;
 		default:
 			/* We don't understand this bit. */
 			clear_bit(i, vdev->features);
diff --git a/fs/Kconfig b/fs/Kconfig
index 9f7270f..525da2e 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -62,6 +62,16 @@
 source "fs/autofs4/Kconfig"
 source "fs/fuse/Kconfig"
 
+config CUSE
+	tristate "Character device in Userpace support"
+	depends on FUSE_FS
+	help
+	  This FUSE extension allows character devices to be
+	  implemented in userspace.
+
+	  If you want to develop or use userspace character device
+	  based on CUSE, answer Y or M.
+
 config GENERIC_ACL
 	bool
 	select FS_POSIX_ACL
diff --git a/fs/eventfd.c b/fs/eventfd.c
index 2a701d5..3f0e197 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -16,6 +16,7 @@
 #include <linux/anon_inodes.h>
 #include <linux/eventfd.h>
 #include <linux/syscalls.h>
+#include <linux/module.h>
 
 struct eventfd_ctx {
 	wait_queue_head_t wqh;
@@ -56,6 +57,7 @@
 
 	return n;
 }
+EXPORT_SYMBOL_GPL(eventfd_signal);
 
 static int eventfd_release(struct inode *inode, struct file *file)
 {
@@ -197,6 +199,7 @@
 
 	return file;
 }
+EXPORT_SYMBOL_GPL(eventfd_fget);
 
 SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags)
 {
diff --git a/fs/exofs/common.h b/fs/exofs/common.h
index b1512c4..24667ee 100644
--- a/fs/exofs/common.h
+++ b/fs/exofs/common.h
@@ -175,10 +175,4 @@
 
 int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr);
 
-int osd_req_read_kern(struct osd_request *or,
-	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
-
-int osd_req_write_kern(struct osd_request *or,
-	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
-
 #endif /*ifndef __EXOFS_COM_H__*/
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index ba8d9fa..77d0a29 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -59,10 +59,9 @@
 		struct inode *inode)
 {
 	struct exofs_sb_info *sbi = inode->i_sb->s_fs_info;
-	struct request_queue *req_q = sbi->s_dev->scsi_device->request_queue;
 
 	pcol->sbi = sbi;
-	pcol->req_q = req_q;
+	pcol->req_q = osd_request_queue(sbi->s_dev);
 	pcol->inode = inode;
 	pcol->expected_pages = expected_pages;
 
@@ -266,7 +265,7 @@
 		goto err;
 	}
 
-	osd_req_read(or, &obj, pcol->bio, i_start);
+	osd_req_read(or, &obj, i_start, pcol->bio, pcol->length);
 
 	if (is_sync) {
 		exofs_sync_op(or, pcol->sbi->s_timeout, oi->i_cred);
@@ -522,7 +521,8 @@
 
 	*pcol_copy = *pcol;
 
-	osd_req_write(or, &obj, pcol_copy->bio, i_start);
+	pcol_copy->bio->bi_rw |= (1 << BIO_RW); /* FIXME: bio_set_dir() */
+	osd_req_write(or, &obj, i_start, pcol_copy->bio, pcol_copy->length);
 	ret = exofs_async_op(or, writepages_done, pcol_copy, oi->i_cred);
 	if (unlikely(ret)) {
 		EXOFS_ERR("write_exec: exofs_async_op() Faild\n");
diff --git a/fs/exofs/osd.c b/fs/exofs/osd.c
index 06ca926..b3d2ccb 100644
--- a/fs/exofs/osd.c
+++ b/fs/exofs/osd.c
@@ -125,29 +125,3 @@
 
 	return -EIO;
 }
-
-int osd_req_read_kern(struct osd_request *or,
-	const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
-{
-	struct request_queue *req_q = or->osd_dev->scsi_device->request_queue;
-	struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
-
-	if (!bio)
-		return -ENOMEM;
-
-	osd_req_read(or, obj, bio, offset);
-	return 0;
-}
-
-int osd_req_write_kern(struct osd_request *or,
-	const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
-{
-	struct request_queue *req_q = or->osd_dev->scsi_device->request_queue;
-	struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
-
-	if (!bio)
-		return -ENOMEM;
-
-	osd_req_write(or, obj, bio, offset);
-	return 0;
-}
diff --git a/fs/fuse/Makefile b/fs/fuse/Makefile
index 7243706..e95eeb4 100644
--- a/fs/fuse/Makefile
+++ b/fs/fuse/Makefile
@@ -3,5 +3,6 @@
 #
 
 obj-$(CONFIG_FUSE_FS) += fuse.o
+obj-$(CONFIG_CUSE) += cuse.o
 
 fuse-objs := dev.o dir.o file.o inode.o control.o
diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c
new file mode 100644
index 0000000..de792dc
--- /dev/null
+++ b/fs/fuse/cuse.c
@@ -0,0 +1,610 @@
+/*
+ * CUSE: Character device in Userspace
+ *
+ * Copyright (C) 2008-2009  SUSE Linux Products GmbH
+ * Copyright (C) 2008-2009  Tejun Heo <tj@kernel.org>
+ *
+ * This file is released under the GPLv2.
+ *
+ * CUSE enables character devices to be implemented from userland much
+ * like FUSE allows filesystems.  On initialization /dev/cuse is
+ * created.  By opening the file and replying to the CUSE_INIT request
+ * userland CUSE server can create a character device.  After that the
+ * operation is very similar to FUSE.
+ *
+ * A CUSE instance involves the following objects.
+ *
+ * cuse_conn	: contains fuse_conn and serves as bonding structure
+ * channel	: file handle connected to the userland CUSE server
+ * cdev		: the implemented character device
+ * dev		: generic device for cdev
+ *
+ * Note that 'channel' is what 'dev' is in FUSE.  As CUSE deals with
+ * devices, it's called 'channel' to reduce confusion.
+ *
+ * channel determines when the character device dies.  When channel is
+ * closed, everything begins to destruct.  The cuse_conn is taken off
+ * the lookup table preventing further access from cdev, cdev and
+ * generic device are removed and the base reference of cuse_conn is
+ * put.
+ *
+ * On each open, the matching cuse_conn is looked up and if found an
+ * additional reference is taken which is released when the file is
+ * closed.
+ */
+
+#include <linux/fuse.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/kdev_t.h>
+#include <linux/kthread.h>
+#include <linux/list.h>
+#include <linux/magic.h>
+#include <linux/miscdevice.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/stat.h>
+
+#include "fuse_i.h"
+
+#define CUSE_CONNTBL_LEN	64
+
+struct cuse_conn {
+	struct list_head	list;	/* linked on cuse_conntbl */
+	struct fuse_conn	fc;	/* fuse connection */
+	struct cdev		*cdev;	/* associated character device */
+	struct device		*dev;	/* device representing @cdev */
+
+	/* init parameters, set once during initialization */
+	bool			unrestricted_ioctl;
+};
+
+static DEFINE_SPINLOCK(cuse_lock);		/* protects cuse_conntbl */
+static struct list_head cuse_conntbl[CUSE_CONNTBL_LEN];
+static struct class *cuse_class;
+
+static struct cuse_conn *fc_to_cc(struct fuse_conn *fc)
+{
+	return container_of(fc, struct cuse_conn, fc);
+}
+
+static struct list_head *cuse_conntbl_head(dev_t devt)
+{
+	return &cuse_conntbl[(MAJOR(devt) + MINOR(devt)) % CUSE_CONNTBL_LEN];
+}
+
+
+/**************************************************************************
+ * CUSE frontend operations
+ *
+ * These are file operations for the character device.
+ *
+ * On open, CUSE opens a file from the FUSE mnt and stores it to
+ * private_data of the open file.  All other ops call FUSE ops on the
+ * FUSE file.
+ */
+
+static ssize_t cuse_read(struct file *file, char __user *buf, size_t count,
+			 loff_t *ppos)
+{
+	loff_t pos = 0;
+
+	return fuse_direct_io(file, buf, count, &pos, 0);
+}
+
+static ssize_t cuse_write(struct file *file, const char __user *buf,
+			  size_t count, loff_t *ppos)
+{
+	loff_t pos = 0;
+	/*
+	 * No locking or generic_write_checks(), the server is
+	 * responsible for locking and sanity checks.
+	 */
+	return fuse_direct_io(file, buf, count, &pos, 1);
+}
+
+static int cuse_open(struct inode *inode, struct file *file)
+{
+	dev_t devt = inode->i_cdev->dev;
+	struct cuse_conn *cc = NULL, *pos;
+	int rc;
+
+	/* look up and get the connection */
+	spin_lock(&cuse_lock);
+	list_for_each_entry(pos, cuse_conntbl_head(devt), list)
+		if (pos->dev->devt == devt) {
+			fuse_conn_get(&pos->fc);
+			cc = pos;
+			break;
+		}
+	spin_unlock(&cuse_lock);
+
+	/* dead? */
+	if (!cc)
+		return -ENODEV;
+
+	/*
+	 * Generic permission check is already done against the chrdev
+	 * file, proceed to open.
+	 */
+	rc = fuse_do_open(&cc->fc, 0, file, 0);
+	if (rc)
+		fuse_conn_put(&cc->fc);
+	return rc;
+}
+
+static int cuse_release(struct inode *inode, struct file *file)
+{
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
+
+	fuse_sync_release(ff, file->f_flags);
+	fuse_conn_put(fc);
+
+	return 0;
+}
+
+static long cuse_file_ioctl(struct file *file, unsigned int cmd,
+			    unsigned long arg)
+{
+	struct fuse_file *ff = file->private_data;
+	struct cuse_conn *cc = fc_to_cc(ff->fc);
+	unsigned int flags = 0;
+
+	if (cc->unrestricted_ioctl)
+		flags |= FUSE_IOCTL_UNRESTRICTED;
+
+	return fuse_do_ioctl(file, cmd, arg, flags);
+}
+
+static long cuse_file_compat_ioctl(struct file *file, unsigned int cmd,
+				   unsigned long arg)
+{
+	struct fuse_file *ff = file->private_data;
+	struct cuse_conn *cc = fc_to_cc(ff->fc);
+	unsigned int flags = FUSE_IOCTL_COMPAT;
+
+	if (cc->unrestricted_ioctl)
+		flags |= FUSE_IOCTL_UNRESTRICTED;
+
+	return fuse_do_ioctl(file, cmd, arg, flags);
+}
+
+static const struct file_operations cuse_frontend_fops = {
+	.owner			= THIS_MODULE,
+	.read			= cuse_read,
+	.write			= cuse_write,
+	.open			= cuse_open,
+	.release		= cuse_release,
+	.unlocked_ioctl		= cuse_file_ioctl,
+	.compat_ioctl		= cuse_file_compat_ioctl,
+	.poll			= fuse_file_poll,
+};
+
+
+/**************************************************************************
+ * CUSE channel initialization and destruction
+ */
+
+struct cuse_devinfo {
+	const char		*name;
+};
+
+/**
+ * cuse_parse_one - parse one key=value pair
+ * @pp: i/o parameter for the current position
+ * @end: points to one past the end of the packed string
+ * @keyp: out parameter for key
+ * @valp: out parameter for value
+ *
+ * *@pp points to packed strings - "key0=val0\0key1=val1\0" which ends
+ * at @end - 1.  This function parses one pair and set *@keyp to the
+ * start of the key and *@valp to the start of the value.  Note that
+ * the original string is modified such that the key string is
+ * terminated with '\0'.  *@pp is updated to point to the next string.
+ *
+ * RETURNS:
+ * 1 on successful parse, 0 on EOF, -errno on failure.
+ */
+static int cuse_parse_one(char **pp, char *end, char **keyp, char **valp)
+{
+	char *p = *pp;
+	char *key, *val;
+
+	while (p < end && *p == '\0')
+		p++;
+	if (p == end)
+		return 0;
+
+	if (end[-1] != '\0') {
+		printk(KERN_ERR "CUSE: info not properly terminated\n");
+		return -EINVAL;
+	}
+
+	key = val = p;
+	p += strlen(p);
+
+	if (valp) {
+		strsep(&val, "=");
+		if (!val)
+			val = key + strlen(key);
+		key = strstrip(key);
+		val = strstrip(val);
+	} else
+		key = strstrip(key);
+
+	if (!strlen(key)) {
+		printk(KERN_ERR "CUSE: zero length info key specified\n");
+		return -EINVAL;
+	}
+
+	*pp = p;
+	*keyp = key;
+	if (valp)
+		*valp = val;
+
+	return 1;
+}
+
+/**
+ * cuse_parse_dev_info - parse device info
+ * @p: device info string
+ * @len: length of device info string
+ * @devinfo: out parameter for parsed device info
+ *
+ * Parse @p to extract device info and store it into @devinfo.  String
+ * pointed to by @p is modified by parsing and @devinfo points into
+ * them, so @p shouldn't be freed while @devinfo is in use.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int cuse_parse_devinfo(char *p, size_t len, struct cuse_devinfo *devinfo)
+{
+	char *end = p + len;
+	char *key, *val;
+	int rc;
+
+	while (true) {
+		rc = cuse_parse_one(&p, end, &key, &val);
+		if (rc < 0)
+			return rc;
+		if (!rc)
+			break;
+		if (strcmp(key, "DEVNAME") == 0)
+			devinfo->name = val;
+		else
+			printk(KERN_WARNING "CUSE: unknown device info \"%s\"\n",
+			       key);
+	}
+
+	if (!devinfo->name || !strlen(devinfo->name)) {
+		printk(KERN_ERR "CUSE: DEVNAME unspecified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void cuse_gendev_release(struct device *dev)
+{
+	kfree(dev);
+}
+
+/**
+ * cuse_process_init_reply - finish initializing CUSE channel
+ *
+ * This function creates the character device and sets up all the
+ * required data structures for it.  Please read the comment at the
+ * top of this file for high level overview.
+ */
+static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
+{
+	struct cuse_conn *cc = fc_to_cc(fc);
+	struct cuse_init_out *arg = &req->misc.cuse_init_out;
+	struct page *page = req->pages[0];
+	struct cuse_devinfo devinfo = { };
+	struct device *dev;
+	struct cdev *cdev;
+	dev_t devt;
+	int rc;
+
+	if (req->out.h.error ||
+	    arg->major != FUSE_KERNEL_VERSION || arg->minor < 11) {
+		goto err;
+	}
+
+	fc->minor = arg->minor;
+	fc->max_read = max_t(unsigned, arg->max_read, 4096);
+	fc->max_write = max_t(unsigned, arg->max_write, 4096);
+
+	/* parse init reply */
+	cc->unrestricted_ioctl = arg->flags & CUSE_UNRESTRICTED_IOCTL;
+
+	rc = cuse_parse_devinfo(page_address(page), req->out.args[1].size,
+				&devinfo);
+	if (rc)
+		goto err;
+
+	/* determine and reserve devt */
+	devt = MKDEV(arg->dev_major, arg->dev_minor);
+	if (!MAJOR(devt))
+		rc = alloc_chrdev_region(&devt, MINOR(devt), 1, devinfo.name);
+	else
+		rc = register_chrdev_region(devt, 1, devinfo.name);
+	if (rc) {
+		printk(KERN_ERR "CUSE: failed to register chrdev region\n");
+		goto err;
+	}
+
+	/* devt determined, create device */
+	rc = -ENOMEM;
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		goto err_region;
+
+	device_initialize(dev);
+	dev_set_uevent_suppress(dev, 1);
+	dev->class = cuse_class;
+	dev->devt = devt;
+	dev->release = cuse_gendev_release;
+	dev_set_drvdata(dev, cc);
+	dev_set_name(dev, "%s", devinfo.name);
+
+	rc = device_add(dev);
+	if (rc)
+		goto err_device;
+
+	/* register cdev */
+	rc = -ENOMEM;
+	cdev = cdev_alloc();
+	if (!cdev)
+		goto err_device;
+
+	cdev->owner = THIS_MODULE;
+	cdev->ops = &cuse_frontend_fops;
+
+	rc = cdev_add(cdev, devt, 1);
+	if (rc)
+		goto err_cdev;
+
+	cc->dev = dev;
+	cc->cdev = cdev;
+
+	/* make the device available */
+	spin_lock(&cuse_lock);
+	list_add(&cc->list, cuse_conntbl_head(devt));
+	spin_unlock(&cuse_lock);
+
+	/* announce device availability */
+	dev_set_uevent_suppress(dev, 0);
+	kobject_uevent(&dev->kobj, KOBJ_ADD);
+out:
+	__free_page(page);
+	return;
+
+err_cdev:
+	cdev_del(cdev);
+err_device:
+	put_device(dev);
+err_region:
+	unregister_chrdev_region(devt, 1);
+err:
+	fc->conn_error = 1;
+	goto out;
+}
+
+static int cuse_send_init(struct cuse_conn *cc)
+{
+	int rc;
+	struct fuse_req *req;
+	struct page *page;
+	struct fuse_conn *fc = &cc->fc;
+	struct cuse_init_in *arg;
+
+	BUILD_BUG_ON(CUSE_INIT_INFO_MAX > PAGE_SIZE);
+
+	req = fuse_get_req(fc);
+	if (IS_ERR(req)) {
+		rc = PTR_ERR(req);
+		goto err;
+	}
+
+	rc = -ENOMEM;
+	page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+	if (!page)
+		goto err_put_req;
+
+	arg = &req->misc.cuse_init_in;
+	arg->major = FUSE_KERNEL_VERSION;
+	arg->minor = FUSE_KERNEL_MINOR_VERSION;
+	arg->flags |= CUSE_UNRESTRICTED_IOCTL;
+	req->in.h.opcode = CUSE_INIT;
+	req->in.numargs = 1;
+	req->in.args[0].size = sizeof(struct cuse_init_in);
+	req->in.args[0].value = arg;
+	req->out.numargs = 2;
+	req->out.args[0].size = sizeof(struct cuse_init_out);
+	req->out.args[0].value = &req->misc.cuse_init_out;
+	req->out.args[1].size = CUSE_INIT_INFO_MAX;
+	req->out.argvar = 1;
+	req->out.argpages = 1;
+	req->pages[0] = page;
+	req->num_pages = 1;
+	req->end = cuse_process_init_reply;
+	fuse_request_send_background(fc, req);
+
+	return 0;
+
+err_put_req:
+	fuse_put_request(fc, req);
+err:
+	return rc;
+}
+
+static void cuse_fc_release(struct fuse_conn *fc)
+{
+	struct cuse_conn *cc = fc_to_cc(fc);
+	kfree(cc);
+}
+
+/**
+ * cuse_channel_open - open method for /dev/cuse
+ * @inode: inode for /dev/cuse
+ * @file: file struct being opened
+ *
+ * Userland CUSE server can create a CUSE device by opening /dev/cuse
+ * and replying to the initilaization request kernel sends.  This
+ * function is responsible for handling CUSE device initialization.
+ * Because the fd opened by this function is used during
+ * initialization, this function only creates cuse_conn and sends
+ * init.  The rest is delegated to a kthread.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int cuse_channel_open(struct inode *inode, struct file *file)
+{
+	struct cuse_conn *cc;
+	int rc;
+
+	/* set up cuse_conn */
+	cc = kzalloc(sizeof(*cc), GFP_KERNEL);
+	if (!cc)
+		return -ENOMEM;
+
+	fuse_conn_init(&cc->fc);
+
+	INIT_LIST_HEAD(&cc->list);
+	cc->fc.release = cuse_fc_release;
+
+	cc->fc.connected = 1;
+	cc->fc.blocked = 0;
+	rc = cuse_send_init(cc);
+	if (rc) {
+		fuse_conn_put(&cc->fc);
+		return rc;
+	}
+	file->private_data = &cc->fc;	/* channel owns base reference to cc */
+
+	return 0;
+}
+
+/**
+ * cuse_channel_release - release method for /dev/cuse
+ * @inode: inode for /dev/cuse
+ * @file: file struct being closed
+ *
+ * Disconnect the channel, deregister CUSE device and initiate
+ * destruction by putting the default reference.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int cuse_channel_release(struct inode *inode, struct file *file)
+{
+	struct cuse_conn *cc = fc_to_cc(file->private_data);
+	int rc;
+
+	/* remove from the conntbl, no more access from this point on */
+	spin_lock(&cuse_lock);
+	list_del_init(&cc->list);
+	spin_unlock(&cuse_lock);
+
+	/* remove device */
+	if (cc->dev)
+		device_unregister(cc->dev);
+	if (cc->cdev) {
+		unregister_chrdev_region(cc->cdev->dev, 1);
+		cdev_del(cc->cdev);
+	}
+
+	/* kill connection and shutdown channel */
+	fuse_conn_kill(&cc->fc);
+	rc = fuse_dev_release(inode, file);	/* puts the base reference */
+
+	return rc;
+}
+
+static struct file_operations cuse_channel_fops; /* initialized during init */
+
+
+/**************************************************************************
+ * Misc stuff and module initializatiion
+ *
+ * CUSE exports the same set of attributes to sysfs as fusectl.
+ */
+
+static ssize_t cuse_class_waiting_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct cuse_conn *cc = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", atomic_read(&cc->fc.num_waiting));
+}
+
+static ssize_t cuse_class_abort_store(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
+{
+	struct cuse_conn *cc = dev_get_drvdata(dev);
+
+	fuse_abort_conn(&cc->fc);
+	return count;
+}
+
+static struct device_attribute cuse_class_dev_attrs[] = {
+	__ATTR(waiting, S_IFREG | 0400, cuse_class_waiting_show, NULL),
+	__ATTR(abort, S_IFREG | 0200, NULL, cuse_class_abort_store),
+	{ }
+};
+
+static struct miscdevice cuse_miscdev = {
+	.minor		= MISC_DYNAMIC_MINOR,
+	.name		= "cuse",
+	.fops		= &cuse_channel_fops,
+};
+
+static int __init cuse_init(void)
+{
+	int i, rc;
+
+	/* init conntbl */
+	for (i = 0; i < CUSE_CONNTBL_LEN; i++)
+		INIT_LIST_HEAD(&cuse_conntbl[i]);
+
+	/* inherit and extend fuse_dev_operations */
+	cuse_channel_fops		= fuse_dev_operations;
+	cuse_channel_fops.owner		= THIS_MODULE;
+	cuse_channel_fops.open		= cuse_channel_open;
+	cuse_channel_fops.release	= cuse_channel_release;
+
+	cuse_class = class_create(THIS_MODULE, "cuse");
+	if (IS_ERR(cuse_class))
+		return PTR_ERR(cuse_class);
+
+	cuse_class->dev_attrs = cuse_class_dev_attrs;
+
+	rc = misc_register(&cuse_miscdev);
+	if (rc) {
+		class_destroy(cuse_class);
+		return rc;
+	}
+
+	return 0;
+}
+
+static void __exit cuse_exit(void)
+{
+	misc_deregister(&cuse_miscdev);
+	class_destroy(cuse_class);
+}
+
+module_init(cuse_init);
+module_exit(cuse_exit);
+
+MODULE_AUTHOR("Tejun Heo <tj@kernel.org>");
+MODULE_DESCRIPTION("Character device in Userspace");
+MODULE_LICENSE("GPL");
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index ba76b68..8fed2ed 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -46,6 +46,7 @@
 		fuse_request_init(req);
 	return req;
 }
+EXPORT_SYMBOL_GPL(fuse_request_alloc);
 
 struct fuse_req *fuse_request_alloc_nofs(void)
 {
@@ -124,6 +125,7 @@
 	atomic_dec(&fc->num_waiting);
 	return ERR_PTR(err);
 }
+EXPORT_SYMBOL_GPL(fuse_get_req);
 
 /*
  * Return request in fuse_file->reserved_req.  However that may
@@ -208,6 +210,7 @@
 			fuse_request_free(req);
 	}
 }
+EXPORT_SYMBOL_GPL(fuse_put_request);
 
 static unsigned len_args(unsigned numargs, struct fuse_arg *args)
 {
@@ -282,7 +285,7 @@
 			wake_up_all(&fc->blocked_waitq);
 		}
 		if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
-		    fc->connected) {
+		    fc->connected && fc->bdi_initialized) {
 			clear_bdi_congested(&fc->bdi, READ);
 			clear_bdi_congested(&fc->bdi, WRITE);
 		}
@@ -400,6 +403,7 @@
 	}
 	spin_unlock(&fc->lock);
 }
+EXPORT_SYMBOL_GPL(fuse_request_send);
 
 static void fuse_request_send_nowait_locked(struct fuse_conn *fc,
 					    struct fuse_req *req)
@@ -408,7 +412,8 @@
 	fc->num_background++;
 	if (fc->num_background == FUSE_MAX_BACKGROUND)
 		fc->blocked = 1;
-	if (fc->num_background == FUSE_CONGESTION_THRESHOLD) {
+	if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
+	    fc->bdi_initialized) {
 		set_bdi_congested(&fc->bdi, READ);
 		set_bdi_congested(&fc->bdi, WRITE);
 	}
@@ -439,6 +444,7 @@
 	req->isreply = 1;
 	fuse_request_send_nowait(fc, req);
 }
+EXPORT_SYMBOL_GPL(fuse_request_send_background);
 
 /*
  * Called under fc->lock
@@ -1105,8 +1111,9 @@
 	}
 	spin_unlock(&fc->lock);
 }
+EXPORT_SYMBOL_GPL(fuse_abort_conn);
 
-static int fuse_dev_release(struct inode *inode, struct file *file)
+int fuse_dev_release(struct inode *inode, struct file *file)
 {
 	struct fuse_conn *fc = fuse_get_conn(file);
 	if (fc) {
@@ -1120,6 +1127,7 @@
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(fuse_dev_release);
 
 static int fuse_dev_fasync(int fd, struct file *file, int on)
 {
@@ -1142,6 +1150,7 @@
 	.release	= fuse_dev_release,
 	.fasync		= fuse_dev_fasync,
 };
+EXPORT_SYMBOL_GPL(fuse_dev_operations);
 
 static struct miscdevice fuse_miscdevice = {
 	.minor = FUSE_MINOR,
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 8b8eebc..b3089a0 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -362,19 +362,6 @@
 }
 
 /*
- * Synchronous release for the case when something goes wrong in CREATE_OPEN
- */
-static void fuse_sync_release(struct fuse_conn *fc, struct fuse_file *ff,
-			      u64 nodeid, int flags)
-{
-	fuse_release_fill(ff, nodeid, flags, FUSE_RELEASE);
-	ff->reserved_req->force = 1;
-	fuse_request_send(fc, ff->reserved_req);
-	fuse_put_request(fc, ff->reserved_req);
-	kfree(ff);
-}
-
-/*
  * Atomic create+open operation
  *
  * If the filesystem doesn't support this, then fall back to separate
@@ -445,12 +432,14 @@
 		goto out_free_ff;
 
 	fuse_put_request(fc, req);
+	ff->fh = outopen.fh;
+	ff->nodeid = outentry.nodeid;
+	ff->open_flags = outopen.open_flags;
 	inode = fuse_iget(dir->i_sb, outentry.nodeid, outentry.generation,
 			  &outentry.attr, entry_attr_timeout(&outentry), 0);
 	if (!inode) {
 		flags &= ~(O_CREAT | O_EXCL | O_TRUNC);
-		ff->fh = outopen.fh;
-		fuse_sync_release(fc, ff, outentry.nodeid, flags);
+		fuse_sync_release(ff, flags);
 		fuse_send_forget(fc, forget_req, outentry.nodeid, 1);
 		return -ENOMEM;
 	}
@@ -460,11 +449,11 @@
 	fuse_invalidate_attr(dir);
 	file = lookup_instantiate_filp(nd, entry, generic_file_open);
 	if (IS_ERR(file)) {
-		ff->fh = outopen.fh;
-		fuse_sync_release(fc, ff, outentry.nodeid, flags);
+		fuse_sync_release(ff, flags);
 		return PTR_ERR(file);
 	}
-	fuse_finish_open(inode, file, ff, &outopen);
+	file->private_data = fuse_file_get(ff);
+	fuse_finish_open(inode, file);
 	return 0;
 
  out_free_ff:
@@ -1035,7 +1024,7 @@
 	req->out.argpages = 1;
 	req->num_pages = 1;
 	req->pages[0] = page;
-	fuse_read_fill(req, file, inode, file->f_pos, PAGE_SIZE, FUSE_READDIR);
+	fuse_read_fill(req, file, file->f_pos, PAGE_SIZE, FUSE_READDIR);
 	fuse_request_send(fc, req);
 	nbytes = req->out.args[0].size;
 	err = req->out.h.error;
@@ -1101,12 +1090,14 @@
 
 static int fuse_dir_open(struct inode *inode, struct file *file)
 {
-	return fuse_open_common(inode, file, 1);
+	return fuse_open_common(inode, file, true);
 }
 
 static int fuse_dir_release(struct inode *inode, struct file *file)
 {
-	return fuse_release_common(inode, file, 1);
+	fuse_release_common(file, FUSE_RELEASEDIR);
+
+	return 0;
 }
 
 static int fuse_dir_fsync(struct file *file, struct dentry *de, int datasync)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 06f30e9..fce6ce6 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -12,13 +12,13 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 
 static const struct file_operations fuse_direct_io_file_operations;
 
-static int fuse_send_open(struct inode *inode, struct file *file, int isdir,
-			  struct fuse_open_out *outargp)
+static int fuse_send_open(struct fuse_conn *fc, u64 nodeid, struct file *file,
+			  int opcode, struct fuse_open_out *outargp)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
 	struct fuse_open_in inarg;
 	struct fuse_req *req;
 	int err;
@@ -31,8 +31,8 @@
 	inarg.flags = file->f_flags & ~(O_CREAT | O_EXCL | O_NOCTTY);
 	if (!fc->atomic_o_trunc)
 		inarg.flags &= ~O_TRUNC;
-	req->in.h.opcode = isdir ? FUSE_OPENDIR : FUSE_OPEN;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.opcode = opcode;
+	req->in.h.nodeid = nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(inarg);
 	req->in.args[0].value = &inarg;
@@ -49,22 +49,27 @@
 struct fuse_file *fuse_file_alloc(struct fuse_conn *fc)
 {
 	struct fuse_file *ff;
+
 	ff = kmalloc(sizeof(struct fuse_file), GFP_KERNEL);
-	if (ff) {
-		ff->reserved_req = fuse_request_alloc();
-		if (!ff->reserved_req) {
-			kfree(ff);
-			return NULL;
-		} else {
-			INIT_LIST_HEAD(&ff->write_entry);
-			atomic_set(&ff->count, 0);
-			spin_lock(&fc->lock);
-			ff->kh = ++fc->khctr;
-			spin_unlock(&fc->lock);
-		}
-		RB_CLEAR_NODE(&ff->polled_node);
-		init_waitqueue_head(&ff->poll_wait);
+	if (unlikely(!ff))
+		return NULL;
+
+	ff->fc = fc;
+	ff->reserved_req = fuse_request_alloc();
+	if (unlikely(!ff->reserved_req)) {
+		kfree(ff);
+		return NULL;
 	}
+
+	INIT_LIST_HEAD(&ff->write_entry);
+	atomic_set(&ff->count, 0);
+	RB_CLEAR_NODE(&ff->polled_node);
+	init_waitqueue_head(&ff->poll_wait);
+
+	spin_lock(&fc->lock);
+	ff->kh = ++fc->khctr;
+	spin_unlock(&fc->lock);
+
 	return ff;
 }
 
@@ -74,7 +79,7 @@
 	kfree(ff);
 }
 
-static struct fuse_file *fuse_file_get(struct fuse_file *ff)
+struct fuse_file *fuse_file_get(struct fuse_file *ff)
 {
 	atomic_inc(&ff->count);
 	return ff;
@@ -82,41 +87,66 @@
 
 static void fuse_release_end(struct fuse_conn *fc, struct fuse_req *req)
 {
-	dput(req->misc.release.dentry);
-	mntput(req->misc.release.vfsmount);
+	path_put(&req->misc.release.path);
 }
 
 static void fuse_file_put(struct fuse_file *ff)
 {
 	if (atomic_dec_and_test(&ff->count)) {
 		struct fuse_req *req = ff->reserved_req;
-		struct inode *inode = req->misc.release.dentry->d_inode;
-		struct fuse_conn *fc = get_fuse_conn(inode);
+
 		req->end = fuse_release_end;
-		fuse_request_send_background(fc, req);
+		fuse_request_send_background(ff->fc, req);
 		kfree(ff);
 	}
 }
 
-void fuse_finish_open(struct inode *inode, struct file *file,
-		      struct fuse_file *ff, struct fuse_open_out *outarg)
+int fuse_do_open(struct fuse_conn *fc, u64 nodeid, struct file *file,
+		 bool isdir)
 {
-	if (outarg->open_flags & FOPEN_DIRECT_IO)
-		file->f_op = &fuse_direct_io_file_operations;
-	if (!(outarg->open_flags & FOPEN_KEEP_CACHE))
-		invalidate_inode_pages2(inode->i_mapping);
-	if (outarg->open_flags & FOPEN_NONSEEKABLE)
-		nonseekable_open(inode, file);
-	ff->fh = outarg->fh;
-	file->private_data = fuse_file_get(ff);
-}
-
-int fuse_open_common(struct inode *inode, struct file *file, int isdir)
-{
-	struct fuse_conn *fc = get_fuse_conn(inode);
 	struct fuse_open_out outarg;
 	struct fuse_file *ff;
 	int err;
+	int opcode = isdir ? FUSE_OPENDIR : FUSE_OPEN;
+
+	ff = fuse_file_alloc(fc);
+	if (!ff)
+		return -ENOMEM;
+
+	err = fuse_send_open(fc, nodeid, file, opcode, &outarg);
+	if (err) {
+		fuse_file_free(ff);
+		return err;
+	}
+
+	if (isdir)
+		outarg.open_flags &= ~FOPEN_DIRECT_IO;
+
+	ff->fh = outarg.fh;
+	ff->nodeid = nodeid;
+	ff->open_flags = outarg.open_flags;
+	file->private_data = fuse_file_get(ff);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fuse_do_open);
+
+void fuse_finish_open(struct inode *inode, struct file *file)
+{
+	struct fuse_file *ff = file->private_data;
+
+	if (ff->open_flags & FOPEN_DIRECT_IO)
+		file->f_op = &fuse_direct_io_file_operations;
+	if (!(ff->open_flags & FOPEN_KEEP_CACHE))
+		invalidate_inode_pages2(inode->i_mapping);
+	if (ff->open_flags & FOPEN_NONSEEKABLE)
+		nonseekable_open(inode, file);
+}
+
+int fuse_open_common(struct inode *inode, struct file *file, bool isdir)
+{
+	struct fuse_conn *fc = get_fuse_conn(inode);
+	int err;
 
 	/* VFS checks this, but only _after_ ->open() */
 	if (file->f_flags & O_DIRECT)
@@ -126,79 +156,86 @@
 	if (err)
 		return err;
 
-	ff = fuse_file_alloc(fc);
-	if (!ff)
-		return -ENOMEM;
-
-	err = fuse_send_open(inode, file, isdir, &outarg);
+	err = fuse_do_open(fc, get_node_id(inode), file, isdir);
 	if (err)
-		fuse_file_free(ff);
-	else {
-		if (isdir)
-			outarg.open_flags &= ~FOPEN_DIRECT_IO;
-		fuse_finish_open(inode, file, ff, &outarg);
-	}
+		return err;
 
-	return err;
+	fuse_finish_open(inode, file);
+
+	return 0;
 }
 
-void fuse_release_fill(struct fuse_file *ff, u64 nodeid, int flags, int opcode)
+static void fuse_prepare_release(struct fuse_file *ff, int flags, int opcode)
 {
+	struct fuse_conn *fc = ff->fc;
 	struct fuse_req *req = ff->reserved_req;
 	struct fuse_release_in *inarg = &req->misc.release.in;
 
+	spin_lock(&fc->lock);
+	list_del(&ff->write_entry);
+	if (!RB_EMPTY_NODE(&ff->polled_node))
+		rb_erase(&ff->polled_node, &fc->polled_files);
+	spin_unlock(&fc->lock);
+
+	wake_up_interruptible_sync(&ff->poll_wait);
+
 	inarg->fh = ff->fh;
 	inarg->flags = flags;
 	req->in.h.opcode = opcode;
-	req->in.h.nodeid = nodeid;
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(struct fuse_release_in);
 	req->in.args[0].value = inarg;
 }
 
-int fuse_release_common(struct inode *inode, struct file *file, int isdir)
+void fuse_release_common(struct file *file, int opcode)
 {
-	struct fuse_file *ff = file->private_data;
-	if (ff) {
-		struct fuse_conn *fc = get_fuse_conn(inode);
-		struct fuse_req *req = ff->reserved_req;
+	struct fuse_file *ff;
+	struct fuse_req *req;
 
-		fuse_release_fill(ff, get_node_id(inode), file->f_flags,
-				  isdir ? FUSE_RELEASEDIR : FUSE_RELEASE);
+	ff = file->private_data;
+	if (unlikely(!ff))
+		return;
 
-		/* Hold vfsmount and dentry until release is finished */
-		req->misc.release.vfsmount = mntget(file->f_path.mnt);
-		req->misc.release.dentry = dget(file->f_path.dentry);
+	req = ff->reserved_req;
+	fuse_prepare_release(ff, file->f_flags, opcode);
 
-		spin_lock(&fc->lock);
-		list_del(&ff->write_entry);
-		if (!RB_EMPTY_NODE(&ff->polled_node))
-			rb_erase(&ff->polled_node, &fc->polled_files);
-		spin_unlock(&fc->lock);
+	/* Hold vfsmount and dentry until release is finished */
+	path_get(&file->f_path);
+	req->misc.release.path = file->f_path;
 
-		wake_up_interruptible_sync(&ff->poll_wait);
-		/*
-		 * Normally this will send the RELEASE request,
-		 * however if some asynchronous READ or WRITE requests
-		 * are outstanding, the sending will be delayed
-		 */
-		fuse_file_put(ff);
-	}
-
-	/* Return value is ignored by VFS */
-	return 0;
+	/*
+	 * Normally this will send the RELEASE request, however if
+	 * some asynchronous READ or WRITE requests are outstanding,
+	 * the sending will be delayed.
+	 */
+	fuse_file_put(ff);
 }
 
 static int fuse_open(struct inode *inode, struct file *file)
 {
-	return fuse_open_common(inode, file, 0);
+	return fuse_open_common(inode, file, false);
 }
 
 static int fuse_release(struct inode *inode, struct file *file)
 {
-	return fuse_release_common(inode, file, 0);
+	fuse_release_common(file, FUSE_RELEASE);
+
+	/* return value is ignored by VFS */
+	return 0;
 }
 
+void fuse_sync_release(struct fuse_file *ff, int flags)
+{
+	WARN_ON(atomic_read(&ff->count) > 1);
+	fuse_prepare_release(ff, flags, FUSE_RELEASE);
+	ff->reserved_req->force = 1;
+	fuse_request_send(ff->fc, ff->reserved_req);
+	fuse_put_request(ff->fc, ff->reserved_req);
+	kfree(ff);
+}
+EXPORT_SYMBOL_GPL(fuse_sync_release);
+
 /*
  * Scramble the ID space with XTEA, so that the value of the files_struct
  * pointer is not exposed to userspace.
@@ -371,8 +408,8 @@
 	return fuse_fsync_common(file, de, datasync, 0);
 }
 
-void fuse_read_fill(struct fuse_req *req, struct file *file,
-		    struct inode *inode, loff_t pos, size_t count, int opcode)
+void fuse_read_fill(struct fuse_req *req, struct file *file, loff_t pos,
+		    size_t count, int opcode)
 {
 	struct fuse_read_in *inarg = &req->misc.read.in;
 	struct fuse_file *ff = file->private_data;
@@ -382,7 +419,7 @@
 	inarg->size = count;
 	inarg->flags = file->f_flags;
 	req->in.h.opcode = opcode;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(struct fuse_read_in);
 	req->in.args[0].value = inarg;
@@ -392,12 +429,12 @@
 }
 
 static size_t fuse_send_read(struct fuse_req *req, struct file *file,
-			     struct inode *inode, loff_t pos, size_t count,
-			     fl_owner_t owner)
+			     loff_t pos, size_t count, fl_owner_t owner)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
 
-	fuse_read_fill(req, file, inode, pos, count, FUSE_READ);
+	fuse_read_fill(req, file, pos, count, FUSE_READ);
 	if (owner != NULL) {
 		struct fuse_read_in *inarg = &req->misc.read.in;
 
@@ -455,7 +492,7 @@
 	req->out.argpages = 1;
 	req->num_pages = 1;
 	req->pages[0] = page;
-	num_read = fuse_send_read(req, file, inode, pos, count, NULL);
+	num_read = fuse_send_read(req, file, pos, count, NULL);
 	err = req->out.h.error;
 	fuse_put_request(fc, req);
 
@@ -504,19 +541,18 @@
 		fuse_file_put(req->ff);
 }
 
-static void fuse_send_readpages(struct fuse_req *req, struct file *file,
-				struct inode *inode)
+static void fuse_send_readpages(struct fuse_req *req, struct file *file)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
 	loff_t pos = page_offset(req->pages[0]);
 	size_t count = req->num_pages << PAGE_CACHE_SHIFT;
 
 	req->out.argpages = 1;
 	req->out.page_zeroing = 1;
-	fuse_read_fill(req, file, inode, pos, count, FUSE_READ);
+	fuse_read_fill(req, file, pos, count, FUSE_READ);
 	req->misc.read.attr_ver = fuse_get_attr_version(fc);
 	if (fc->async_read) {
-		struct fuse_file *ff = file->private_data;
 		req->ff = fuse_file_get(ff);
 		req->end = fuse_readpages_end;
 		fuse_request_send_background(fc, req);
@@ -546,7 +582,7 @@
 	    (req->num_pages == FUSE_MAX_PAGES_PER_REQ ||
 	     (req->num_pages + 1) * PAGE_CACHE_SIZE > fc->max_read ||
 	     req->pages[req->num_pages - 1]->index + 1 != page->index)) {
-		fuse_send_readpages(req, data->file, inode);
+		fuse_send_readpages(req, data->file);
 		data->req = req = fuse_get_req(fc);
 		if (IS_ERR(req)) {
 			unlock_page(page);
@@ -580,7 +616,7 @@
 	err = read_cache_pages(mapping, pages, fuse_readpages_fill, &data);
 	if (!err) {
 		if (data.req->num_pages)
-			fuse_send_readpages(data.req, file, inode);
+			fuse_send_readpages(data.req, file);
 		else
 			fuse_put_request(fc, data.req);
 	}
@@ -607,24 +643,19 @@
 	return generic_file_aio_read(iocb, iov, nr_segs, pos);
 }
 
-static void fuse_write_fill(struct fuse_req *req, struct file *file,
-			    struct fuse_file *ff, struct inode *inode,
-			    loff_t pos, size_t count, int writepage)
+static void fuse_write_fill(struct fuse_req *req, struct fuse_file *ff,
+			    loff_t pos, size_t count)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
 	struct fuse_write_in *inarg = &req->misc.write.in;
 	struct fuse_write_out *outarg = &req->misc.write.out;
 
-	memset(inarg, 0, sizeof(struct fuse_write_in));
 	inarg->fh = ff->fh;
 	inarg->offset = pos;
 	inarg->size = count;
-	inarg->write_flags = writepage ? FUSE_WRITE_CACHE : 0;
-	inarg->flags = file ? file->f_flags : 0;
 	req->in.h.opcode = FUSE_WRITE;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 2;
-	if (fc->minor < 9)
+	if (ff->fc->minor < 9)
 		req->in.args[0].size = FUSE_COMPAT_WRITE_IN_SIZE;
 	else
 		req->in.args[0].size = sizeof(struct fuse_write_in);
@@ -636,13 +667,15 @@
 }
 
 static size_t fuse_send_write(struct fuse_req *req, struct file *file,
-			      struct inode *inode, loff_t pos, size_t count,
-			      fl_owner_t owner)
+			      loff_t pos, size_t count, fl_owner_t owner)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
-	fuse_write_fill(req, file, file->private_data, inode, pos, count, 0);
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
+	struct fuse_write_in *inarg = &req->misc.write.in;
+
+	fuse_write_fill(req, ff, pos, count);
+	inarg->flags = file->f_flags;
 	if (owner != NULL) {
-		struct fuse_write_in *inarg = &req->misc.write.in;
 		inarg->write_flags |= FUSE_WRITE_LOCKOWNER;
 		inarg->lock_owner = fuse_lock_owner_id(fc, owner);
 	}
@@ -700,7 +733,7 @@
 	req->num_pages = 1;
 	req->pages[0] = page;
 	req->page_offset = offset;
-	nres = fuse_send_write(req, file, inode, pos, count, NULL);
+	nres = fuse_send_write(req, file, pos, count, NULL);
 	err = req->out.h.error;
 	fuse_put_request(fc, req);
 	if (!err && !nres)
@@ -741,7 +774,7 @@
 	for (i = 0; i < req->num_pages; i++)
 		fuse_wait_on_page_writeback(inode, req->pages[i]->index);
 
-	res = fuse_send_write(req, file, inode, pos, count, NULL);
+	res = fuse_send_write(req, file, pos, count, NULL);
 
 	offset = req->page_offset;
 	count = res;
@@ -979,25 +1012,23 @@
 	return 0;
 }
 
-static ssize_t fuse_direct_io(struct file *file, const char __user *buf,
-			      size_t count, loff_t *ppos, int write)
+ssize_t fuse_direct_io(struct file *file, const char __user *buf,
+		       size_t count, loff_t *ppos, int write)
 {
-	struct inode *inode = file->f_path.dentry->d_inode;
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
 	size_t nmax = write ? fc->max_write : fc->max_read;
 	loff_t pos = *ppos;
 	ssize_t res = 0;
 	struct fuse_req *req;
 
-	if (is_bad_inode(inode))
-		return -EIO;
-
 	req = fuse_get_req(fc);
 	if (IS_ERR(req))
 		return PTR_ERR(req);
 
 	while (count) {
 		size_t nres;
+		fl_owner_t owner = current->files;
 		size_t nbytes = min(count, nmax);
 		int err = fuse_get_user_pages(req, buf, &nbytes, write);
 		if (err) {
@@ -1006,11 +1037,10 @@
 		}
 
 		if (write)
-			nres = fuse_send_write(req, file, inode, pos, nbytes,
-					       current->files);
+			nres = fuse_send_write(req, file, pos, nbytes, owner);
 		else
-			nres = fuse_send_read(req, file, inode, pos, nbytes,
-					      current->files);
+			nres = fuse_send_read(req, file, pos, nbytes, owner);
+
 		fuse_release_user_pages(req, !write);
 		if (req->out.h.error) {
 			if (!res)
@@ -1034,20 +1064,27 @@
 		}
 	}
 	fuse_put_request(fc, req);
-	if (res > 0) {
-		if (write)
-			fuse_write_update_size(inode, pos);
+	if (res > 0)
 		*ppos = pos;
-	}
-	fuse_invalidate_attr(inode);
 
 	return res;
 }
+EXPORT_SYMBOL_GPL(fuse_direct_io);
 
 static ssize_t fuse_direct_read(struct file *file, char __user *buf,
 				     size_t count, loff_t *ppos)
 {
-	return fuse_direct_io(file, buf, count, ppos, 0);
+	ssize_t res;
+	struct inode *inode = file->f_path.dentry->d_inode;
+
+	if (is_bad_inode(inode))
+		return -EIO;
+
+	res = fuse_direct_io(file, buf, count, ppos, 0);
+
+	fuse_invalidate_attr(inode);
+
+	return res;
 }
 
 static ssize_t fuse_direct_write(struct file *file, const char __user *buf,
@@ -1055,12 +1092,22 @@
 {
 	struct inode *inode = file->f_path.dentry->d_inode;
 	ssize_t res;
+
+	if (is_bad_inode(inode))
+		return -EIO;
+
 	/* Don't allow parallel writes to the same file */
 	mutex_lock(&inode->i_mutex);
 	res = generic_write_checks(file, ppos, &count, 0);
-	if (!res)
+	if (!res) {
 		res = fuse_direct_io(file, buf, count, ppos, 1);
+		if (res > 0)
+			fuse_write_update_size(inode, *ppos);
+	}
 	mutex_unlock(&inode->i_mutex);
+
+	fuse_invalidate_attr(inode);
+
 	return res;
 }
 
@@ -1177,9 +1224,10 @@
 	req->ff = fuse_file_get(ff);
 	spin_unlock(&fc->lock);
 
-	fuse_write_fill(req, NULL, ff, inode, page_offset(page), 0, 1);
+	fuse_write_fill(req, ff, page_offset(page), 0);
 
 	copy_highpage(tmp_page, page);
+	req->misc.write.in.write_flags |= FUSE_WRITE_CACHE;
 	req->in.argpages = 1;
 	req->num_pages = 1;
 	req->pages[0] = tmp_page;
@@ -1603,12 +1651,11 @@
  * limits ioctl data transfers to well-formed ioctls and is the forced
  * behavior for all FUSE servers.
  */
-static long fuse_file_do_ioctl(struct file *file, unsigned int cmd,
-			       unsigned long arg, unsigned int flags)
+long fuse_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg,
+		   unsigned int flags)
 {
-	struct inode *inode = file->f_dentry->d_inode;
 	struct fuse_file *ff = file->private_data;
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_conn *fc = ff->fc;
 	struct fuse_ioctl_in inarg = {
 		.fh = ff->fh,
 		.cmd = cmd,
@@ -1627,13 +1674,6 @@
 	/* assume all the iovs returned by client always fits in a page */
 	BUILD_BUG_ON(sizeof(struct iovec) * FUSE_IOCTL_MAX_IOV > PAGE_SIZE);
 
-	if (!fuse_allow_task(fc, current))
-		return -EACCES;
-
-	err = -EIO;
-	if (is_bad_inode(inode))
-		goto out;
-
 	err = -ENOMEM;
 	pages = kzalloc(sizeof(pages[0]) * FUSE_MAX_PAGES_PER_REQ, GFP_KERNEL);
 	iov_page = alloc_page(GFP_KERNEL);
@@ -1694,7 +1734,7 @@
 
 	/* okay, let's send it to the client */
 	req->in.h.opcode = FUSE_IOCTL;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(inarg);
 	req->in.args[0].value = &inarg;
@@ -1777,17 +1817,33 @@
 
 	return err ? err : outarg.result;
 }
+EXPORT_SYMBOL_GPL(fuse_do_ioctl);
+
+static long fuse_file_ioctl_common(struct file *file, unsigned int cmd,
+				   unsigned long arg, unsigned int flags)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	struct fuse_conn *fc = get_fuse_conn(inode);
+
+	if (!fuse_allow_task(fc, current))
+		return -EACCES;
+
+	if (is_bad_inode(inode))
+		return -EIO;
+
+	return fuse_do_ioctl(file, cmd, arg, flags);
+}
 
 static long fuse_file_ioctl(struct file *file, unsigned int cmd,
 			    unsigned long arg)
 {
-	return fuse_file_do_ioctl(file, cmd, arg, 0);
+	return fuse_file_ioctl_common(file, cmd, arg, 0);
 }
 
 static long fuse_file_compat_ioctl(struct file *file, unsigned int cmd,
 				   unsigned long arg)
 {
-	return fuse_file_do_ioctl(file, cmd, arg, FUSE_IOCTL_COMPAT);
+	return fuse_file_ioctl_common(file, cmd, arg, FUSE_IOCTL_COMPAT);
 }
 
 /*
@@ -1841,11 +1897,10 @@
 	spin_unlock(&fc->lock);
 }
 
-static unsigned fuse_file_poll(struct file *file, poll_table *wait)
+unsigned fuse_file_poll(struct file *file, poll_table *wait)
 {
-	struct inode *inode = file->f_dentry->d_inode;
 	struct fuse_file *ff = file->private_data;
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_conn *fc = ff->fc;
 	struct fuse_poll_in inarg = { .fh = ff->fh, .kh = ff->kh };
 	struct fuse_poll_out outarg;
 	struct fuse_req *req;
@@ -1870,7 +1925,7 @@
 		return PTR_ERR(req);
 
 	req->in.h.opcode = FUSE_POLL;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(inarg);
 	req->in.args[0].value = &inarg;
@@ -1889,6 +1944,7 @@
 	}
 	return POLLERR;
 }
+EXPORT_SYMBOL_GPL(fuse_file_poll);
 
 /*
  * This is called from fuse_handle_notify() on FUSE_NOTIFY_POLL and
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 6fc5aed..aaf2f9f 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -97,8 +97,13 @@
 	struct list_head writepages;
 };
 
+struct fuse_conn;
+
 /** FUSE specific file data */
 struct fuse_file {
+	/** Fuse connection for this file */
+	struct fuse_conn *fc;
+
 	/** Request reserved for flush and release */
 	struct fuse_req *reserved_req;
 
@@ -108,9 +113,15 @@
 	/** File handle used by userspace */
 	u64 fh;
 
+	/** Node id of this file */
+	u64 nodeid;
+
 	/** Refcount */
 	atomic_t count;
 
+	/** FOPEN_* flags returned by open */
+	u32 open_flags;
+
 	/** Entry on inode's write_files list */
 	struct list_head write_entry;
 
@@ -185,8 +196,6 @@
 	FUSE_REQ_FINISHED
 };
 
-struct fuse_conn;
-
 /**
  * A request to the client
  */
@@ -248,11 +257,12 @@
 		struct fuse_forget_in forget_in;
 		struct {
 			struct fuse_release_in in;
-			struct vfsmount *vfsmount;
-			struct dentry *dentry;
+			struct path path;
 		} release;
 		struct fuse_init_in init_in;
 		struct fuse_init_out init_out;
+		struct cuse_init_in cuse_init_in;
+		struct cuse_init_out cuse_init_out;
 		struct {
 			struct fuse_read_in in;
 			u64 attr_ver;
@@ -386,6 +396,9 @@
 	/** Filesystem supports NFS exporting.  Only set in INIT */
 	unsigned export_support:1;
 
+	/** Set if bdi is valid */
+	unsigned bdi_initialized:1;
+
 	/*
 	 * The following bitfields are only for optimization purposes
 	 * and hence races in setting them will not cause malfunction
@@ -515,25 +528,24 @@
  * Initialize READ or READDIR request
  */
 void fuse_read_fill(struct fuse_req *req, struct file *file,
-		    struct inode *inode, loff_t pos, size_t count, int opcode);
+		    loff_t pos, size_t count, int opcode);
 
 /**
  * Send OPEN or OPENDIR request
  */
-int fuse_open_common(struct inode *inode, struct file *file, int isdir);
+int fuse_open_common(struct inode *inode, struct file *file, bool isdir);
 
 struct fuse_file *fuse_file_alloc(struct fuse_conn *fc);
+struct fuse_file *fuse_file_get(struct fuse_file *ff);
 void fuse_file_free(struct fuse_file *ff);
-void fuse_finish_open(struct inode *inode, struct file *file,
-		      struct fuse_file *ff, struct fuse_open_out *outarg);
+void fuse_finish_open(struct inode *inode, struct file *file);
 
-/** Fill in ff->reserved_req with a RELEASE request */
-void fuse_release_fill(struct fuse_file *ff, u64 nodeid, int flags, int opcode);
+void fuse_sync_release(struct fuse_file *ff, int flags);
 
 /**
  * Send RELEASE or RELEASEDIR request
  */
-int fuse_release_common(struct inode *inode, struct file *file, int isdir);
+void fuse_release_common(struct file *file, int opcode);
 
 /**
  * Send FSYNC or FSYNCDIR request
@@ -652,10 +664,12 @@
  */
 struct fuse_conn *fuse_conn_get(struct fuse_conn *fc);
 
+void fuse_conn_kill(struct fuse_conn *fc);
+
 /**
  * Initialize fuse_conn
  */
-int fuse_conn_init(struct fuse_conn *fc, struct super_block *sb);
+void fuse_conn_init(struct fuse_conn *fc);
 
 /**
  * Release reference to fuse_conn
@@ -694,4 +708,13 @@
 
 u64 fuse_get_attr_version(struct fuse_conn *fc);
 
+int fuse_do_open(struct fuse_conn *fc, u64 nodeid, struct file *file,
+		 bool isdir);
+ssize_t fuse_direct_io(struct file *file, const char __user *buf,
+		       size_t count, loff_t *ppos, int write);
+long fuse_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg,
+		   unsigned int flags);
+unsigned fuse_file_poll(struct file *file, poll_table *wait);
+int fuse_dev_release(struct inode *inode, struct file *file);
+
 #endif /* _FS_FUSE_I_H */
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 91f7c85f..f0df55a 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -277,11 +277,14 @@
 	}
 }
 
-static void fuse_put_super(struct super_block *sb)
+static void fuse_bdi_destroy(struct fuse_conn *fc)
 {
-	struct fuse_conn *fc = get_fuse_conn_super(sb);
+	if (fc->bdi_initialized)
+		bdi_destroy(&fc->bdi);
+}
 
-	fuse_send_destroy(fc);
+void fuse_conn_kill(struct fuse_conn *fc)
+{
 	spin_lock(&fc->lock);
 	fc->connected = 0;
 	fc->blocked = 0;
@@ -295,7 +298,16 @@
 	list_del(&fc->entry);
 	fuse_ctl_remove_conn(fc);
 	mutex_unlock(&fuse_mutex);
-	bdi_destroy(&fc->bdi);
+	fuse_bdi_destroy(fc);
+}
+EXPORT_SYMBOL_GPL(fuse_conn_kill);
+
+static void fuse_put_super(struct super_block *sb)
+{
+	struct fuse_conn *fc = get_fuse_conn_super(sb);
+
+	fuse_send_destroy(fc);
+	fuse_conn_kill(fc);
 	fuse_conn_put(fc);
 }
 
@@ -466,10 +478,8 @@
 	return 0;
 }
 
-int fuse_conn_init(struct fuse_conn *fc, struct super_block *sb)
+void fuse_conn_init(struct fuse_conn *fc)
 {
-	int err;
-
 	memset(fc, 0, sizeof(*fc));
 	spin_lock_init(&fc->lock);
 	mutex_init(&fc->inst_mutex);
@@ -484,49 +494,12 @@
 	INIT_LIST_HEAD(&fc->bg_queue);
 	INIT_LIST_HEAD(&fc->entry);
 	atomic_set(&fc->num_waiting, 0);
-	fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
-	fc->bdi.unplug_io_fn = default_unplug_io_fn;
-	/* fuse does it's own writeback accounting */
-	fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB;
 	fc->khctr = 0;
 	fc->polled_files = RB_ROOT;
-	fc->dev = sb->s_dev;
-	err = bdi_init(&fc->bdi);
-	if (err)
-		goto error_mutex_destroy;
-	if (sb->s_bdev) {
-		err = bdi_register(&fc->bdi, NULL, "%u:%u-fuseblk",
-				   MAJOR(fc->dev), MINOR(fc->dev));
-	} else {
-		err = bdi_register_dev(&fc->bdi, fc->dev);
-	}
-	if (err)
-		goto error_bdi_destroy;
-	/*
-	 * For a single fuse filesystem use max 1% of dirty +
-	 * writeback threshold.
-	 *
-	 * This gives about 1M of write buffer for memory maps on a
-	 * machine with 1G and 10% dirty_ratio, which should be more
-	 * than enough.
-	 *
-	 * Privileged users can raise it by writing to
-	 *
-	 *    /sys/class/bdi/<bdi>/max_ratio
-	 */
-	bdi_set_max_ratio(&fc->bdi, 1);
 	fc->reqctr = 0;
 	fc->blocked = 1;
 	fc->attr_version = 1;
 	get_random_bytes(&fc->scramble_key, sizeof(fc->scramble_key));
-
-	return 0;
-
- error_bdi_destroy:
-	bdi_destroy(&fc->bdi);
- error_mutex_destroy:
-	mutex_destroy(&fc->inst_mutex);
-	return err;
 }
 EXPORT_SYMBOL_GPL(fuse_conn_init);
 
@@ -539,12 +512,14 @@
 		fc->release(fc);
 	}
 }
+EXPORT_SYMBOL_GPL(fuse_conn_put);
 
 struct fuse_conn *fuse_conn_get(struct fuse_conn *fc)
 {
 	atomic_inc(&fc->count);
 	return fc;
 }
+EXPORT_SYMBOL_GPL(fuse_conn_get);
 
 static struct inode *fuse_get_root_inode(struct super_block *sb, unsigned mode)
 {
@@ -797,6 +772,48 @@
 	kfree(fc);
 }
 
+static int fuse_bdi_init(struct fuse_conn *fc, struct super_block *sb)
+{
+	int err;
+
+	fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
+	fc->bdi.unplug_io_fn = default_unplug_io_fn;
+	/* fuse does it's own writeback accounting */
+	fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB;
+
+	err = bdi_init(&fc->bdi);
+	if (err)
+		return err;
+
+	fc->bdi_initialized = 1;
+
+	if (sb->s_bdev) {
+		err =  bdi_register(&fc->bdi, NULL, "%u:%u-fuseblk",
+				    MAJOR(fc->dev), MINOR(fc->dev));
+	} else {
+		err = bdi_register_dev(&fc->bdi, fc->dev);
+	}
+
+	if (err)
+		return err;
+
+	/*
+	 * For a single fuse filesystem use max 1% of dirty +
+	 * writeback threshold.
+	 *
+	 * This gives about 1M of write buffer for memory maps on a
+	 * machine with 1G and 10% dirty_ratio, which should be more
+	 * than enough.
+	 *
+	 * Privileged users can raise it by writing to
+	 *
+	 *    /sys/class/bdi/<bdi>/max_ratio
+	 */
+	bdi_set_max_ratio(&fc->bdi, 1);
+
+	return 0;
+}
+
 static int fuse_fill_super(struct super_block *sb, void *data, int silent)
 {
 	struct fuse_conn *fc;
@@ -843,11 +860,12 @@
 	if (!fc)
 		goto err_fput;
 
-	err = fuse_conn_init(fc, sb);
-	if (err) {
-		kfree(fc);
-		goto err_fput;
-	}
+	fuse_conn_init(fc);
+
+	fc->dev = sb->s_dev;
+	err = fuse_bdi_init(fc, sb);
+	if (err)
+		goto err_put_conn;
 
 	fc->release = fuse_free_conn;
 	fc->flags = d.flags;
@@ -911,7 +929,7 @@
  err_put_root:
 	dput(root_dentry);
  err_put_conn:
-	bdi_destroy(&fc->bdi);
+	fuse_bdi_destroy(fc);
 	fuse_conn_put(fc);
  err_fput:
 	fput(file);
diff --git a/fs/gfs2/Makefile b/fs/gfs2/Makefile
index d53a9be..3da2f1f 100644
--- a/fs/gfs2/Makefile
+++ b/fs/gfs2/Makefile
@@ -1,3 +1,4 @@
+EXTRA_CFLAGS := -I$(src)
 obj-$(CONFIG_GFS2_FS) += gfs2.o
 gfs2-y := acl.o bmap.o dir.o eaops.o eattr.o glock.o \
 	glops.o inode.o log.o lops.o main.o meta_io.o \
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 3297635..6d47379 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -25,6 +25,7 @@
 #include "trans.h"
 #include "dir.h"
 #include "util.h"
+#include "trace_gfs2.h"
 
 /* This doesn't need to be that large as max 64 bit pointers in a 4k
  * block is 512, so __u16 is fine for that. It saves stack space to
@@ -589,6 +590,7 @@
 	clear_buffer_mapped(bh_map);
 	clear_buffer_new(bh_map);
 	clear_buffer_boundary(bh_map);
+	trace_gfs2_bmap(ip, bh_map, lblock, create, 1);
 	if (gfs2_is_dir(ip)) {
 		bsize = sdp->sd_jbsize;
 		arr = sdp->sd_jheightsize;
@@ -623,6 +625,7 @@
 	ret = 0;
 out:
 	release_metapath(&mp);
+	trace_gfs2_bmap(ip, bh_map, lblock, create, ret);
 	bmap_unlock(ip, create);
 	return ret;
 
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 2bf62bc..297421c 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -39,6 +39,8 @@
 #include "super.h"
 #include "util.h"
 #include "bmap.h"
+#define CREATE_TRACE_POINTS
+#include "trace_gfs2.h"
 
 struct gfs2_gl_hash_bucket {
         struct hlist_head hb_list;
@@ -155,7 +157,7 @@
 
 	if (aspace)
 		gfs2_aspace_put(aspace);
-
+	trace_gfs2_glock_put(gl);
 	sdp->sd_lockstruct.ls_ops->lm_put_lock(gfs2_glock_cachep, gl);
 }
 
@@ -317,14 +319,17 @@
 						return 2;
 					gh->gh_error = ret;
 					list_del_init(&gh->gh_list);
+					trace_gfs2_glock_queue(gh, 0);
 					gfs2_holder_wake(gh);
 					goto restart;
 				}
 				set_bit(HIF_HOLDER, &gh->gh_iflags);
+				trace_gfs2_promote(gh, 1);
 				gfs2_holder_wake(gh);
 				goto restart;
 			}
 			set_bit(HIF_HOLDER, &gh->gh_iflags);
+			trace_gfs2_promote(gh, 0);
 			gfs2_holder_wake(gh);
 			continue;
 		}
@@ -354,6 +359,7 @@
 		else
 			continue;
 		list_del_init(&gh->gh_list);
+		trace_gfs2_glock_queue(gh, 0);
 		gfs2_holder_wake(gh);
 	}
 }
@@ -422,6 +428,7 @@
 	int rv;
 
 	spin_lock(&gl->gl_spin);
+	trace_gfs2_glock_state_change(gl, state);
 	state_change(gl, state);
 	gh = find_first_waiter(gl);
 
@@ -851,6 +858,7 @@
 			gl->gl_demote_state != state) {
 		gl->gl_demote_state = LM_ST_UNLOCKED;
 	}
+	trace_gfs2_demote_rq(gl);
 }
 
 /**
@@ -936,6 +944,7 @@
 			goto do_cancel;
 		return;
 	}
+	trace_gfs2_glock_queue(gh, 1);
 	list_add_tail(&gh->gh_list, insert_pt);
 do_cancel:
 	gh = list_entry(gl->gl_holders.next, struct gfs2_holder, gh_list);
@@ -1032,6 +1041,7 @@
 		    !test_bit(GLF_DEMOTE, &gl->gl_flags))
 			fast_path = 1;
 	}
+	trace_gfs2_glock_queue(gh, 0);
 	spin_unlock(&gl->gl_spin);
 	if (likely(fast_path))
 		return;
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index f2e449c..13c6237 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -28,6 +28,7 @@
 #include "meta_io.h"
 #include "util.h"
 #include "dir.h"
+#include "trace_gfs2.h"
 
 #define PULL 1
 
@@ -313,6 +314,7 @@
 		gfs2_log_lock(sdp);
 	}
 	atomic_sub(blks, &sdp->sd_log_blks_free);
+	trace_gfs2_log_blocks(sdp, -blks);
 	gfs2_log_unlock(sdp);
 	mutex_unlock(&sdp->sd_log_reserve_mutex);
 
@@ -333,6 +335,7 @@
 
 	gfs2_log_lock(sdp);
 	atomic_add(blks, &sdp->sd_log_blks_free);
+	trace_gfs2_log_blocks(sdp, blks);
 	gfs2_assert_withdraw(sdp,
 			     atomic_read(&sdp->sd_log_blks_free) <= sdp->sd_jdesc->jd_blocks);
 	gfs2_log_unlock(sdp);
@@ -558,6 +561,7 @@
 
 	gfs2_log_lock(sdp);
 	atomic_add(dist, &sdp->sd_log_blks_free);
+	trace_gfs2_log_blocks(sdp, dist);
 	gfs2_assert_withdraw(sdp, atomic_read(&sdp->sd_log_blks_free) <= sdp->sd_jdesc->jd_blocks);
 	gfs2_log_unlock(sdp);
 
@@ -715,6 +719,7 @@
 		up_write(&sdp->sd_log_flush_lock);
 		return;
 	}
+	trace_gfs2_log_flush(sdp, 1);
 
 	ai = kzalloc(sizeof(struct gfs2_ail), GFP_NOFS | __GFP_NOFAIL);
 	INIT_LIST_HEAD(&ai->ai_ail1_list);
@@ -746,6 +751,7 @@
 	else if (sdp->sd_log_tail != current_tail(sdp) && !sdp->sd_log_idle){
 		gfs2_log_lock(sdp);
 		atomic_dec(&sdp->sd_log_blks_free); /* Adjust for unreserved buffer */
+		trace_gfs2_log_blocks(sdp, -1);
 		gfs2_log_unlock(sdp);
 		log_write_header(sdp, 0, PULL);
 	}
@@ -763,7 +769,7 @@
 		ai = NULL;
 	}
 	gfs2_log_unlock(sdp);
-
+	trace_gfs2_log_flush(sdp, 0);
 	up_write(&sdp->sd_log_flush_lock);
 
 	kfree(ai);
@@ -787,6 +793,7 @@
 	gfs2_assert_withdraw(sdp, sdp->sd_log_blks_reserved + tr->tr_reserved >= reserved);
 	unused = sdp->sd_log_blks_reserved - reserved + tr->tr_reserved;
 	atomic_add(unused, &sdp->sd_log_blks_free);
+	trace_gfs2_log_blocks(sdp, unused);
 	gfs2_assert_withdraw(sdp, atomic_read(&sdp->sd_log_blks_free) <=
 			     sdp->sd_jdesc->jd_blocks);
 	sdp->sd_log_blks_reserved = reserved;
diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index 00315f5..9969ff0 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -27,6 +27,7 @@
 #include "rgrp.h"
 #include "trans.h"
 #include "util.h"
+#include "trace_gfs2.h"
 
 /**
  * gfs2_pin - Pin a buffer in memory
@@ -53,6 +54,7 @@
 	if (bd->bd_ail)
 		list_move(&bd->bd_ail_st_list, &bd->bd_ail->ai_ail2_list);
 	get_bh(bh);
+	trace_gfs2_pin(bd, 1);
 }
 
 /**
@@ -89,6 +91,7 @@
 	bd->bd_ail = ai;
 	list_add(&bd->bd_ail_st_list, &ai->ai_ail1_list);
 	clear_bit(GLF_LFLUSH, &bd->bd_gl->gl_flags);
+	trace_gfs2_pin(bd, 0);
 	gfs2_log_unlock(sdp);
 	unlock_buffer(bh);
 }
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index cc34f27..7bc3c45 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -33,6 +33,7 @@
 #include "log.h"
 #include "quota.h"
 #include "dir.h"
+#include "trace_gfs2.h"
 
 #define DO 0
 #define UNDO 1
@@ -775,6 +776,7 @@
 		/* Map the extents for this journal's blocks */
 		map_journal_extents(sdp);
 	}
+	trace_gfs2_log_blocks(sdp, atomic_read(&sdp->sd_log_blks_free));
 
 	if (sdp->sd_lockstruct.ls_first) {
 		unsigned int x;
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index de32397..daa4ae3 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -29,6 +29,7 @@
 #include "util.h"
 #include "log.h"
 #include "inode.h"
+#include "trace_gfs2.h"
 
 #define BFITNOENT ((u32)~0)
 #define NO_BLOCK ((u64)~0)
@@ -1519,7 +1520,7 @@
 	spin_lock(&sdp->sd_rindex_spin);
 	rgd->rd_free_clone -= *n;
 	spin_unlock(&sdp->sd_rindex_spin);
-
+	trace_gfs2_block_alloc(ip, block, *n, GFS2_BLKST_USED);
 	*bn = block;
 	return 0;
 
@@ -1571,7 +1572,7 @@
 	spin_lock(&sdp->sd_rindex_spin);
 	rgd->rd_free_clone--;
 	spin_unlock(&sdp->sd_rindex_spin);
-
+	trace_gfs2_block_alloc(dip, block, 1, GFS2_BLKST_DINODE);
 	return block;
 }
 
@@ -1591,7 +1592,7 @@
 	rgd = rgblk_free(sdp, bstart, blen, GFS2_BLKST_FREE);
 	if (!rgd)
 		return;
-
+	trace_gfs2_block_alloc(ip, bstart, blen, GFS2_BLKST_FREE);
 	rgd->rd_free += blen;
 
 	gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
@@ -1619,7 +1620,7 @@
 	rgd = rgblk_free(sdp, bstart, blen, GFS2_BLKST_FREE);
 	if (!rgd)
 		return;
-
+	trace_gfs2_block_alloc(ip, bstart, blen, GFS2_BLKST_FREE);
 	rgd->rd_free += blen;
 
 	gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
@@ -1642,6 +1643,7 @@
 	rgd = rgblk_free(sdp, blkno, 1, GFS2_BLKST_UNLINKED);
 	if (!rgd)
 		return;
+	trace_gfs2_block_alloc(ip, blkno, 1, GFS2_BLKST_UNLINKED);
 	gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
 	gfs2_rgrp_out(rgd, rgd->rd_bits[0].bi_bh->b_data);
 	gfs2_trans_add_rg(rgd);
@@ -1673,6 +1675,7 @@
 void gfs2_free_di(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip)
 {
 	gfs2_free_uninit_di(rgd, ip->i_no_addr);
+	trace_gfs2_block_alloc(ip, ip->i_no_addr, 1, GFS2_BLKST_FREE);
 	gfs2_quota_change(ip, -1, ip->i_inode.i_uid, ip->i_inode.i_gid);
 	gfs2_meta_wipe(ip, ip->i_no_addr, 1);
 }
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index c8930b3..0a68013 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -719,8 +719,6 @@
 	int error;
 	struct gfs2_jdesc *jd;
 
-	lock_kernel();
-
 	/*  Unfreeze the filesystem, if we need to  */
 
 	mutex_lock(&sdp->sd_freeze_lock);
@@ -787,8 +785,6 @@
 
 	/*  At this point, we're through participating in the lockspace  */
 	gfs2_sys_fs_del(sdp);
-
-	unlock_kernel();
 }
 
 /**
diff --git a/fs/gfs2/trace_gfs2.h b/fs/gfs2/trace_gfs2.h
new file mode 100644
index 0000000..98d6ef1
--- /dev/null
+++ b/fs/gfs2/trace_gfs2.h
@@ -0,0 +1,407 @@
+#if !defined(_TRACE_GFS2_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_GFS2_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM gfs2
+#define TRACE_INCLUDE_FILE trace_gfs2
+
+#include <linux/fs.h>
+#include <linux/buffer_head.h>
+#include <linux/dlmconstants.h>
+#include <linux/gfs2_ondisk.h>
+#include "incore.h"
+#include "glock.h"
+
+#define dlm_state_name(nn) { DLM_LOCK_##nn, #nn }
+#define glock_trace_name(x) __print_symbolic(x,		\
+			    dlm_state_name(IV),		\
+			    dlm_state_name(NL),		\
+			    dlm_state_name(CR),		\
+			    dlm_state_name(CW),		\
+			    dlm_state_name(PR),		\
+			    dlm_state_name(PW),		\
+			    dlm_state_name(EX))
+
+#define block_state_name(x) __print_symbolic(x,			\
+			    { GFS2_BLKST_FREE, "free" },	\
+			    { GFS2_BLKST_USED, "used" },	\
+			    { GFS2_BLKST_DINODE, "dinode" },	\
+			    { GFS2_BLKST_UNLINKED, "unlinked" })
+
+#define show_glock_flags(flags) __print_flags(flags, "",	\
+	{(1UL << GLF_LOCK),			"l" },		\
+	{(1UL << GLF_DEMOTE),			"D" },		\
+	{(1UL << GLF_PENDING_DEMOTE),		"d" },		\
+	{(1UL << GLF_DEMOTE_IN_PROGRESS),	"p" },		\
+	{(1UL << GLF_DIRTY),			"y" },		\
+	{(1UL << GLF_LFLUSH),			"f" },		\
+	{(1UL << GLF_INVALIDATE_IN_PROGRESS),	"i" },		\
+	{(1UL << GLF_REPLY_PENDING),		"r" },		\
+	{(1UL << GLF_INITIAL),			"I" },		\
+	{(1UL << GLF_FROZEN),			"F" })
+
+#ifndef NUMPTY
+#define NUMPTY
+static inline u8 glock_trace_state(unsigned int state)
+{
+	switch(state) {
+	case LM_ST_SHARED:
+		return DLM_LOCK_PR;
+	case LM_ST_DEFERRED:
+		return DLM_LOCK_CW;
+	case LM_ST_EXCLUSIVE:
+		return DLM_LOCK_EX;
+	}
+	return DLM_LOCK_NL;
+}
+#endif
+
+/* Section 1 - Locking
+ *
+ * Objectives:
+ * Latency: Remote demote request to state change
+ * Latency: Local lock request to state change
+ * Latency: State change to lock grant
+ * Correctness: Ordering of local lock state vs. I/O requests
+ * Correctness: Responses to remote demote requests
+ */
+
+/* General glock state change (DLM lock request completes) */
+TRACE_EVENT(gfs2_glock_state_change,
+
+	TP_PROTO(const struct gfs2_glock *gl, unsigned int new_state),
+
+	TP_ARGS(gl, new_state),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	u8,	cur_state		)
+		__field(	u8,	new_state		)
+		__field(	u8,	dmt_state		)
+		__field(	u8,	tgt_state		)
+		__field(	unsigned long,	flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= gl->gl_sbd->sd_vfs->s_dev;
+		__entry->glnum		= gl->gl_name.ln_number;
+		__entry->gltype		= gl->gl_name.ln_type;
+		__entry->cur_state	= glock_trace_state(gl->gl_state);
+		__entry->new_state	= glock_trace_state(new_state);
+		__entry->tgt_state	= glock_trace_state(gl->gl_target);
+		__entry->dmt_state	= glock_trace_state(gl->gl_demote_state);
+		__entry->flags		= gl->gl_flags;
+	),
+
+	TP_printk("%u,%u glock %d:%lld state %s to %s tgt:%s dmt:%s flags:%s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->gltype,
+		 (unsigned long long)__entry->glnum,
+		  glock_trace_name(__entry->cur_state),
+		  glock_trace_name(__entry->new_state),
+		  glock_trace_name(__entry->tgt_state),
+		  glock_trace_name(__entry->dmt_state),
+		  show_glock_flags(__entry->flags))
+);
+
+/* State change -> unlocked, glock is being deallocated */
+TRACE_EVENT(gfs2_glock_put,
+
+	TP_PROTO(const struct gfs2_glock *gl),
+
+	TP_ARGS(gl),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	u8,	cur_state		)
+		__field(	unsigned long,	flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= gl->gl_sbd->sd_vfs->s_dev;
+		__entry->gltype		= gl->gl_name.ln_type;
+		__entry->glnum		= gl->gl_name.ln_number;
+		__entry->cur_state	= glock_trace_state(gl->gl_state);
+		__entry->flags		= gl->gl_flags;
+	),
+
+	TP_printk("%u,%u glock %d:%lld state %s => %s flags:%s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+                  __entry->gltype, (unsigned long long)__entry->glnum,
+                  glock_trace_name(__entry->cur_state),
+		  glock_trace_name(DLM_LOCK_IV),
+		  show_glock_flags(__entry->flags))
+
+);
+
+/* Callback (local or remote) requesting lock demotion */
+TRACE_EVENT(gfs2_demote_rq,
+
+	TP_PROTO(const struct gfs2_glock *gl),
+
+	TP_ARGS(gl),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	u8,	cur_state		)
+		__field(	u8,	dmt_state		)
+		__field(	unsigned long,	flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= gl->gl_sbd->sd_vfs->s_dev;
+		__entry->gltype		= gl->gl_name.ln_type;
+		__entry->glnum		= gl->gl_name.ln_number;
+		__entry->cur_state	= glock_trace_state(gl->gl_state);
+		__entry->dmt_state	= glock_trace_state(gl->gl_demote_state);
+		__entry->flags		= gl->gl_flags;
+	),
+
+	TP_printk("%u,%u glock %d:%lld demote %s to %s flags:%s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->gltype,
+		  (unsigned long long)__entry->glnum,
+                  glock_trace_name(__entry->cur_state),
+                  glock_trace_name(__entry->dmt_state),
+		  show_glock_flags(__entry->flags))
+
+);
+
+/* Promotion/grant of a glock */
+TRACE_EVENT(gfs2_promote,
+
+	TP_PROTO(const struct gfs2_holder *gh, int first),
+
+	TP_ARGS(gh, first),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	int,	first			)
+		__field(	u8,	state			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= gh->gh_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->glnum	= gh->gh_gl->gl_name.ln_number;
+		__entry->gltype	= gh->gh_gl->gl_name.ln_type;
+		__entry->first	= first;
+		__entry->state	= glock_trace_state(gh->gh_state);
+	),
+
+	TP_printk("%u,%u glock %u:%llu promote %s %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->gltype,
+		  (unsigned long long)__entry->glnum,
+		  __entry->first ? "first": "other",
+		  glock_trace_name(__entry->state))
+);
+
+/* Queue/dequeue a lock request */
+TRACE_EVENT(gfs2_glock_queue,
+
+	TP_PROTO(const struct gfs2_holder *gh, int queue),
+
+	TP_ARGS(gh, queue),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	int,	queue			)
+		__field(	u8,	state			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= gh->gh_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->glnum	= gh->gh_gl->gl_name.ln_number;
+		__entry->gltype	= gh->gh_gl->gl_name.ln_type;
+		__entry->queue	= queue;
+		__entry->state	= glock_trace_state(gh->gh_state);
+	),
+
+	TP_printk("%u,%u glock %u:%llu %squeue %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->gltype,
+		  (unsigned long long)__entry->glnum,
+		  __entry->queue ? "" : "de",
+		  glock_trace_name(__entry->state))
+);
+
+/* Section 2 - Log/journal
+ *
+ * Objectives:
+ * Latency: Log flush time
+ * Correctness: pin/unpin vs. disk I/O ordering
+ * Performance: Log usage stats
+ */
+
+/* Pin/unpin a block in the log */
+TRACE_EVENT(gfs2_pin,
+
+	TP_PROTO(const struct gfs2_bufdata *bd, int pin),
+
+	TP_ARGS(bd, pin),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	int,	pin			)
+		__field(	u32,	len			)
+		__field(	sector_t,	block		)
+		__field(	u64,	ino			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bd->bd_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->pin		= pin;
+		__entry->len		= bd->bd_bh->b_size;
+		__entry->block		= bd->bd_bh->b_blocknr;
+		__entry->ino		= bd->bd_gl->gl_name.ln_number;
+	),
+
+	TP_printk("%u,%u log %s %llu/%lu inode %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->pin ? "pin" : "unpin",
+		  (unsigned long long)__entry->block,
+		  (unsigned long)__entry->len,
+		  (unsigned long long)__entry->ino)
+);
+
+/* Flushing the log */
+TRACE_EVENT(gfs2_log_flush,
+
+	TP_PROTO(const struct gfs2_sbd *sdp, int start),
+
+	TP_ARGS(sdp, start),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	int,	start			)
+		__field(	u64,	log_seq			)
+	),
+
+	TP_fast_assign(
+		__entry->dev            = sdp->sd_vfs->s_dev;
+		__entry->start		= start;
+		__entry->log_seq	= sdp->sd_log_sequence;
+	),
+
+	TP_printk("%u,%u log flush %s %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->start ? "start" : "end",
+		  (unsigned long long)__entry->log_seq)
+);
+
+/* Reserving/releasing blocks in the log */
+TRACE_EVENT(gfs2_log_blocks,
+
+	TP_PROTO(const struct gfs2_sbd *sdp, int blocks),
+
+	TP_ARGS(sdp, blocks),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	int,	blocks			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= sdp->sd_vfs->s_dev;
+		__entry->blocks		= blocks;
+	),
+
+	TP_printk("%u,%u log reserve %d", MAJOR(__entry->dev),
+		  MINOR(__entry->dev), __entry->blocks)
+);
+
+/* Section 3 - bmap
+ *
+ * Objectives:
+ * Latency: Bmap request time
+ * Performance: Block allocator tracing
+ * Correctness: Test of disard generation vs. blocks allocated
+ */
+
+/* Map an extent of blocks, possibly a new allocation */
+TRACE_EVENT(gfs2_bmap,
+
+	TP_PROTO(const struct gfs2_inode *ip, const struct buffer_head *bh,
+		sector_t lblock, int create, int errno),
+
+	TP_ARGS(ip, bh, lblock, create, errno),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	sector_t, lblock		)
+		__field(	sector_t, pblock		)
+		__field(	u64,	inum			)
+		__field(	unsigned long, state		)
+		__field(	u32,	len			)
+		__field(	int,	create			)
+		__field(	int,	errno			)
+	),
+
+	TP_fast_assign(
+		__entry->dev            = ip->i_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->lblock		= lblock;
+		__entry->pblock		= buffer_mapped(bh) ?  bh->b_blocknr : 0;
+		__entry->inum		= ip->i_no_addr;
+		__entry->state		= bh->b_state;
+		__entry->len		= bh->b_size;
+		__entry->create		= create;
+		__entry->errno		= errno;
+	),
+
+	TP_printk("%u,%u bmap %llu map %llu/%lu to %llu flags:%08lx %s %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long long)__entry->inum,
+		  (unsigned long long)__entry->lblock,
+		  (unsigned long)__entry->len,
+		  (unsigned long long)__entry->pblock,
+		  __entry->state, __entry->create ? "create " : "nocreate",
+		  __entry->errno)
+);
+
+/* Keep track of blocks as they are allocated/freed */
+TRACE_EVENT(gfs2_block_alloc,
+
+	TP_PROTO(const struct gfs2_inode *ip, u64 block, unsigned len,
+		u8 block_state),
+
+	TP_ARGS(ip, block, len, block_state),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	start			)
+		__field(	u64,	inum			)
+		__field(	u32,	len			)
+		__field(	u8,	block_state		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ip->i_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->start		= block;
+		__entry->inum		= ip->i_no_addr;
+		__entry->len		= len;
+		__entry->block_state	= block_state;
+	),
+
+	TP_printk("%u,%u bmap %llu alloc %llu/%lu %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long long)__entry->inum,
+		  (unsigned long long)__entry->start,
+		  (unsigned long)__entry->len,
+		  block_state_name(__entry->block_state))
+);
+
+#endif /* _TRACE_GFS2_H */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#include <trace/define_trace.h>
+
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 0af3608..1a9c787 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -556,27 +556,49 @@
 
 	/* add partitions */
 	for (p = 1; p < state->limit; p++) {
-		sector_t size = state->parts[p].size;
-		sector_t from = state->parts[p].from;
+		sector_t size, from;
+try_scan:
+		size = state->parts[p].size;
 		if (!size)
 			continue;
+
+		from = state->parts[p].from;
 		if (from >= get_capacity(disk)) {
 			printk(KERN_WARNING
 			       "%s: p%d ignored, start %llu is behind the end of the disk\n",
 			       disk->disk_name, p, (unsigned long long) from);
 			continue;
 		}
+
 		if (from + size > get_capacity(disk)) {
-			/*
-			 * we can not ignore partitions of broken tables
-			 * created by for example camera firmware, but we
-			 * limit them to the end of the disk to avoid
-			 * creating invalid block devices
-			 */
+			struct block_device_operations *bdops = disk->fops;
+			unsigned long long capacity;
+
 			printk(KERN_WARNING
-			       "%s: p%d size %llu limited to end of disk\n",
+			       "%s: p%d size %llu exceeds device capacity, ",
 			       disk->disk_name, p, (unsigned long long) size);
-			size = get_capacity(disk) - from;
+
+			if (bdops->set_capacity &&
+			    (disk->flags & GENHD_FL_NATIVE_CAPACITY) == 0) {
+				printk(KERN_CONT "enabling native capacity\n");
+				capacity = bdops->set_capacity(disk, ~0ULL);
+				disk->flags |= GENHD_FL_NATIVE_CAPACITY;
+				if (capacity > get_capacity(disk)) {
+					set_capacity(disk, capacity);
+					check_disk_size_change(disk, bdev);
+					bdev->bd_invalidated = 0;
+				}
+				goto try_scan;
+			} else {
+				/*
+				 * we can not ignore partitions of broken tables
+				 * created by for example camera firmware, but
+				 * we limit them to the end of the disk to avoid
+				 * creating invalid block devices
+				 */
+				printk(KERN_CONT "limited to end of disk\n");
+				size = get_capacity(disk) - from;
+			}
 		}
 		part = add_partition(disk, p, from, size,
 				     state->parts[p].flags);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ebdfde8..0b1a6ca 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1226,6 +1226,8 @@
 	int (*direct_access) (struct block_device *, sector_t,
 						void **, unsigned long *);
 	int (*media_changed) (struct gendisk *);
+	unsigned long long (*set_capacity) (struct gendisk *,
+						unsigned long long);
 	int (*revalidate_disk) (struct gendisk *);
 	int (*getgeo)(struct block_device *, struct hd_geometry *);
 	struct module *owner;
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 37bcb50..04fb513 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -261,6 +261,11 @@
 # define __section(S) __attribute__ ((__section__(#S)))
 #endif
 
+/* Are two types/vars the same type (ignoring qualifiers)? */
+#ifndef __same_type
+# define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))
+#endif
+
 /*
  * Prevent the compiler from merging or refetching accesses.  The compiler
  * is also forbidden from reordering successive instances of ACCESS_ONCE(),
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index 162e5de..d41ed59 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -121,6 +121,13 @@
 #define FUSE_BIG_WRITES		(1 << 5)
 
 /**
+ * CUSE INIT request/reply flags
+ *
+ * CUSE_UNRESTRICTED_IOCTL:  use unrestricted ioctl
+ */
+#define CUSE_UNRESTRICTED_IOCTL	(1 << 0)
+
+/**
  * Release flags
  */
 #define FUSE_RELEASE_FLUSH	(1 << 0)
@@ -210,6 +217,9 @@
 	FUSE_DESTROY       = 38,
 	FUSE_IOCTL         = 39,
 	FUSE_POLL          = 40,
+
+	/* CUSE specific operations */
+	CUSE_INIT          = 4096,
 };
 
 enum fuse_notify_code {
@@ -401,6 +411,27 @@
 	__u32	max_write;
 };
 
+#define CUSE_INIT_INFO_MAX 4096
+
+struct cuse_init_in {
+	__u32	major;
+	__u32	minor;
+	__u32	unused;
+	__u32	flags;
+};
+
+struct cuse_init_out {
+	__u32	major;
+	__u32	minor;
+	__u32	unused;
+	__u32	flags;
+	__u32	max_read;
+	__u32	max_write;
+	__u32	dev_major;		/* chardev major */
+	__u32	dev_minor;		/* chardev minor */
+	__u32	spare[10];
+};
+
 struct fuse_interrupt_in {
 	__u64	unique;
 };
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 149fda2..7cbd38d 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -114,6 +114,7 @@
 #define GENHD_FL_UP				16
 #define GENHD_FL_SUPPRESS_PARTITION_INFO	32
 #define GENHD_FL_EXT_DEVT			64 /* allow extended devt */
+#define GENHD_FL_NATIVE_CAPACITY		128
 
 #define BLK_SCSI_MAX_CMDS	(256)
 #define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 0bbc15f..3760e7c 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -85,6 +85,9 @@
 			__GFP_NOWARN|__GFP_REPEAT|__GFP_NOFAIL|\
 			__GFP_NORETRY|__GFP_NOMEMALLOC)
 
+/* Control slab gfp mask during early boot */
+#define SLAB_GFP_BOOT_MASK __GFP_BITS_MASK & ~(__GFP_WAIT|__GFP_IO|__GFP_FS)
+
 /* Control allocation constraints */
 #define GFP_CONSTRAINT_MASK (__GFP_HARDWALL|__GFP_THISNODE)
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 867cb68..a6c6a2f 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -178,7 +178,7 @@
 /*
  * Structure to hold all information about the location of this port
  */
-typedef struct hw_regs_s {
+struct ide_hw {
 	union {
 		struct ide_io_ports	io_ports;
 		unsigned long		io_ports_array[IDE_NR_PORTS];
@@ -186,12 +186,11 @@
 
 	int		irq;			/* our irq number */
 	ide_ack_intr_t	*ack_intr;		/* acknowledge interrupt */
-	hwif_chipset_t  chipset;
 	struct device	*dev, *parent;
 	unsigned long	config;
-} hw_regs_t;
+};
 
-static inline void ide_std_init_ports(hw_regs_t *hw,
+static inline void ide_std_init_ports(struct ide_hw *hw,
 				      unsigned long io_addr,
 				      unsigned long ctl_addr)
 {
@@ -218,21 +217,12 @@
 
 /*
  * Special Driver Flags
- *
- * set_geometry	: respecify drive geometry
- * recalibrate	: seek to cyl 0
- * set_multmode	: set multmode count
- * reserved	: unused
  */
-typedef union {
-	unsigned all			: 8;
-	struct {
-		unsigned set_geometry	: 1;
-		unsigned recalibrate	: 1;
-		unsigned set_multmode	: 1;
-		unsigned reserved	: 5;
-	} b;
-} special_t;
+enum {
+	IDE_SFLAG_SET_GEOMETRY		= (1 << 0),
+	IDE_SFLAG_RECALIBRATE		= (1 << 1),
+	IDE_SFLAG_SET_MULTMODE		= (1 << 2),
+};
 
 /*
  * Status returned from various ide_ functions
@@ -391,6 +381,7 @@
 struct ide_disk_ops {
 	int		(*check)(struct ide_drive_s *, const char *);
 	int		(*get_capacity)(struct ide_drive_s *);
+	u64		(*set_capacity)(struct ide_drive_s *, u64);
 	void		(*setup)(struct ide_drive_s *);
 	void		(*flush)(struct ide_drive_s *);
 	int		(*init_media)(struct ide_drive_s *, struct gendisk *);
@@ -468,6 +459,8 @@
 	IDE_DFLAG_NICE1			= (1 << 5),
 	/* device is physically present */
 	IDE_DFLAG_PRESENT		= (1 << 6),
+	/* disable Host Protected Area */
+	IDE_DFLAG_NOHPA			= (1 << 7),
 	/* id read from device (synthetic if not set) */
 	IDE_DFLAG_ID_READ		= (1 << 8),
 	IDE_DFLAG_NOPROBE		= (1 << 9),
@@ -506,6 +499,7 @@
 	/* write protect */
 	IDE_DFLAG_WP			= (1 << 29),
 	IDE_DFLAG_FORMAT_IN_PROGRESS	= (1 << 30),
+	IDE_DFLAG_NIEN_QUIRK		= (1 << 31),
 };
 
 struct ide_drive_s {
@@ -530,14 +524,13 @@
 	unsigned long sleep;		/* sleep until this time */
 	unsigned long timeout;		/* max time to wait for irq */
 
-	special_t	special;	/* special action flags */
+	u8	special_flags;		/* special action flags */
 
 	u8	select;			/* basic drive/head select reg value */
 	u8	retry_pio;		/* retrying dma capable host in pio */
 	u8	waiting_for_dma;	/* dma currently in progress */
 	u8	dma;			/* atapi dma flag */
 
-        u8	quirk_list;	/* considered quirky, set for a specific host */
         u8	init_speed;	/* transfer rate set at boot */
         u8	current_speed;	/* current transfer rate set */
 	u8	desired_speed;	/* desired transfer rate set */
@@ -562,8 +555,7 @@
 	unsigned int	drive_data;	/* used by set_pio_mode/dev_select() */
 	unsigned int	failures;	/* current failure count */
 	unsigned int	max_failures;	/* maximum allowed failure count */
-	u64		probed_capacity;/* initial reported media capacity (ide-cd only currently) */
-
+	u64		probed_capacity;/* initial/native media capacity */
 	u64		capacity64;	/* total number of sectors */
 
 	int		lun;		/* logical unit */
@@ -1222,7 +1214,7 @@
 }
 
 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *,
-			 hw_regs_t *, hw_regs_t **);
+			 struct ide_hw *, struct ide_hw **);
 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
@@ -1461,16 +1453,18 @@
 void ide_register_region(struct gendisk *);
 void ide_unregister_region(struct gendisk *);
 
+void ide_check_nien_quirk_list(ide_drive_t *);
 void ide_undecoded_slave(ide_drive_t *);
 
 void ide_port_apply_params(ide_hwif_t *);
 int ide_sysfs_register_port(ide_hwif_t *);
 
-struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
+struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **,
+				unsigned int);
 void ide_host_free(struct ide_host *);
 int ide_host_register(struct ide_host *, const struct ide_port_info *,
-		      hw_regs_t **);
-int ide_host_add(const struct ide_port_info *, hw_regs_t **,
+		      struct ide_hw **);
+int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int,
 		 struct ide_host **);
 void ide_host_remove(struct ide_host *);
 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index cfe4fe1..60e8934d 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -79,6 +79,7 @@
 #define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
 #define ETH_P_TIPC	0x88CA		/* TIPC 			*/
 #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
+#define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
 #define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
 
 /*
diff --git a/include/linux/lguest.h b/include/linux/lguest.h
index 175e63f..7bc1440 100644
--- a/include/linux/lguest.h
+++ b/include/linux/lguest.h
@@ -30,6 +30,10 @@
 	/* Wallclock time set by the Host. */
 	struct timespec time;
 
+	/* Interrupt pending set by the Host.  The Guest should do a hypercall
+	 * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). */
+	int irq_pending;
+
 	/* Async hypercall ring.  Instead of directly making hypercalls, we can
 	 * place them in here for processing the next time the Host wants.
 	 * This batching can be quite efficient. */
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index a53407a..bfefbdf 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -57,7 +57,8 @@
 	LHREQ_INITIALIZE, /* + base, pfnlimit, start */
 	LHREQ_GETDMA, /* No longer used */
 	LHREQ_IRQ, /* + irq */
-	LHREQ_BREAK, /* + on/off flag (on blocks until someone does off) */
+	LHREQ_BREAK, /* No longer used */
+	LHREQ_EVENTFD, /* + address, fd. */
 };
 
 /* The alignment to use between consumer and producer parts of vring.
diff --git a/include/linux/module.h b/include/linux/module.h
index a8f2c0a..a7bc6e7b 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -77,6 +77,7 @@
 void sort_extable(struct exception_table_entry *start,
 		  struct exception_table_entry *finish);
 void sort_main_extable(void);
+void trim_init_extable(struct module *m);
 
 #ifdef MODULE
 #define MODULE_GENERIC_TABLE(gtype,name)			\
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index a4f0b93..6547c3c 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -36,9 +36,14 @@
 /* Returns length written or -errno.  Buffer is 4k (ie. be short!) */
 typedef int (*param_get_fn)(char *buffer, struct kernel_param *kp);
 
+/* Flag bits for kernel_param.flags */
+#define KPARAM_KMALLOCED	1
+#define KPARAM_ISBOOL		2
+
 struct kernel_param {
 	const char *name;
-	unsigned int perm;
+	u16 perm;
+	u16 flags;
 	param_set_fn set;
 	param_get_fn get;
 	union {
@@ -79,7 +84,7 @@
    parameters.  perm sets the visibility in sysfs: 000 means it's
    not there, read bits mean it's readable, write bits mean it's
    writable. */
-#define __module_param_call(prefix, name, set, get, arg, perm)		\
+#define __module_param_call(prefix, name, set, get, arg, isbool, perm)	\
 	/* Default value instead of permissions? */			\
 	static int __param_perm_check_##name __attribute__((unused)) =	\
 	BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2))	\
@@ -88,10 +93,13 @@
 	static struct kernel_param __moduleparam_const __param_##name	\
 	__used								\
     __attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \
-	= { __param_str_##name, perm, set, get, { arg } }
+	= { __param_str_##name, perm, isbool ? KPARAM_ISBOOL : 0,	\
+	    set, get, { arg } }
 
 #define module_param_call(name, set, get, arg, perm)			      \
-	__module_param_call(MODULE_PARAM_PREFIX, name, set, get, arg, perm)
+	__module_param_call(MODULE_PARAM_PREFIX,			      \
+			    name, set, get, arg,			      \
+			    __same_type(*(arg), bool), perm)
 
 /* Helper functions: type is byte, short, ushort, int, uint, long,
    ulong, charp, bool or invbool, or XXX if you define param_get_XXX,
@@ -120,15 +128,16 @@
 #define core_param(name, var, type, perm)				\
 	param_check_##type(name, &(var));				\
 	__module_param_call("", name, param_set_##type, param_get_##type, \
-			    &var, perm)
+			    &var, __same_type(var, bool), perm)
 #endif /* !MODULE */
 
 /* Actually copy string: maxlen param is usually sizeof(string). */
 #define module_param_string(name, string, len, perm)			\
 	static const struct kparam_string __param_string_##name		\
 		= { len, string };					\
-	module_param_call(name, param_set_copystring, param_get_string,	\
-			  .str = &__param_string_##name, perm);		\
+	__module_param_call(MODULE_PARAM_PREFIX, name,			\
+			    param_set_copystring, param_get_string,	\
+			    .str = &__param_string_##name, 0, perm);	\
 	__MODULE_PARM_TYPE(name, "string")
 
 /* Called on module insert or kernel boot */
@@ -186,21 +195,30 @@
 extern int param_get_charp(char *buffer, struct kernel_param *kp);
 #define param_check_charp(name, p) __param_check(name, p, char *)
 
+/* For historical reasons "bool" parameters can be (unsigned) "int". */
 extern int param_set_bool(const char *val, struct kernel_param *kp);
 extern int param_get_bool(char *buffer, struct kernel_param *kp);
-#define param_check_bool(name, p) __param_check(name, p, int)
+#define param_check_bool(name, p)					\
+	static inline void __check_##name(void)				\
+	{								\
+		BUILD_BUG_ON(!__same_type(*(p), bool) &&		\
+			     !__same_type(*(p), unsigned int) &&	\
+			     !__same_type(*(p), int));			\
+	}
 
 extern int param_set_invbool(const char *val, struct kernel_param *kp);
 extern int param_get_invbool(char *buffer, struct kernel_param *kp);
-#define param_check_invbool(name, p) __param_check(name, p, int)
+#define param_check_invbool(name, p) __param_check(name, p, bool)
 
 /* Comma-separated array: *nump is set to number they actually specified. */
 #define module_param_array_named(name, array, type, nump, perm)		\
 	static const struct kparam_array __param_arr_##name		\
 	= { ARRAY_SIZE(array), nump, param_set_##type, param_get_##type,\
 	    sizeof(array[0]), array };					\
-	module_param_call(name, param_array_set, param_array_get, 	\
-			  .arr = &__param_arr_##name, perm);		\
+	__module_param_call(MODULE_PARAM_PREFIX, name,			\
+			    param_array_set, param_array_get,		\
+			    .arr = &__param_arr_##name,			\
+			    __same_type(array[0], bool), perm);		\
 	__MODULE_PARM_TYPE(name, "array of " #type)
 
 #define module_param_array(name, type, nump, perm)		\
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index 7339c7b..13f126c 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -18,7 +18,19 @@
 };
 
 void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat);
-void __init page_cgroup_init(void);
+
+#ifdef CONFIG_SPARSEMEM
+static inline void __init page_cgroup_init_flatmem(void)
+{
+}
+extern void __init page_cgroup_init(void);
+#else
+void __init page_cgroup_init_flatmem(void);
+static inline void __init page_cgroup_init(void)
+{
+}
+#endif
+
 struct page_cgroup *lookup_page_cgroup(struct page *page);
 
 enum {
@@ -87,6 +99,10 @@
 {
 }
 
+static inline void __init page_cgroup_init_flatmem(void)
+{
+}
+
 #endif
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index d7d1c41..19f8e6d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1005,6 +1005,7 @@
 #define PCI_DEVICE_ID_PLX_PCI200SYN	0x3196
 #define PCI_DEVICE_ID_PLX_9030          0x9030
 #define PCI_DEVICE_ID_PLX_9050		0x9050
+#define PCI_DEVICE_ID_PLX_9056		0x9056
 #define PCI_DEVICE_ID_PLX_9080		0x9080
 #define PCI_DEVICE_ID_PLX_GTEK_SERIAL2	0xa001
 
@@ -1314,6 +1315,13 @@
 
 #define PCI_VENDOR_ID_CREATIVE		0x1102 /* duplicate: ECTIVA */
 #define PCI_DEVICE_ID_CREATIVE_EMU10K1	0x0002
+#define PCI_DEVICE_ID_CREATIVE_20K1	0x0005
+#define PCI_DEVICE_ID_CREATIVE_20K2	0x000b
+#define PCI_SUBDEVICE_ID_CREATIVE_SB0760	0x0024
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08801	0x0041
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08802	0x0042
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08803	0x0043
+#define PCI_SUBDEVICE_ID_CREATIVE_HENDRIX	0x6000
 
 #define PCI_VENDOR_ID_ECTIVA		0x1102 /* duplicate: CREATIVE */
 #define PCI_DEVICE_ID_ECTIVA_EV1938	0x8938
@@ -1847,6 +1855,10 @@
 #define PCI_SUBDEVICE_ID_HYPERCOPE_METRO	0x0107
 #define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2	0x0108
 
+#define PCI_VENDOR_ID_DIGIGRAM		0x1369
+#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM	0xc001
+#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM	0xc002
+
 #define PCI_VENDOR_ID_KAWASAKI		0x136b
 #define PCI_DEVICE_ID_MCHIP_KL5A72002	0xff01
 
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 4880306..219b8fb 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -319,4 +319,6 @@
 	return kmalloc_node(size, flags | __GFP_ZERO, node);
 }
 
+void __init kmem_cache_init_late(void);
+
 #endif	/* _LINUX_SLAB_H */
diff --git a/include/linux/slob_def.h b/include/linux/slob_def.h
index 0ec00b3..bb5368d 100644
--- a/include/linux/slob_def.h
+++ b/include/linux/slob_def.h
@@ -34,4 +34,9 @@
 	return kmalloc(size, flags);
 }
 
+static inline void kmem_cache_init_late(void)
+{
+	/* Nothing to do */
+}
+
 #endif /* __LINUX_SLOB_DEF_H */
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index be5d40c..4dcbc2c 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -302,4 +302,6 @@
 }
 #endif
 
+void __init kmem_cache_init_late(void);
+
 #endif /* _LINUX_SLUB_DEF_H */
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 06005fa..4fca4f5 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -10,14 +10,17 @@
 
 /**
  * virtqueue - a queue to register buffers for sending or receiving.
+ * @list: the chain of virtqueues for this device
  * @callback: the function to call when buffers are consumed (can be NULL).
+ * @name: the name of this virtqueue (mainly for debugging)
  * @vdev: the virtio device this queue was created for.
  * @vq_ops: the operations for this virtqueue (see below).
  * @priv: a pointer for the virtqueue implementation to use.
  */
-struct virtqueue
-{
+struct virtqueue {
+	struct list_head list;
 	void (*callback)(struct virtqueue *vq);
+	const char *name;
 	struct virtio_device *vdev;
 	struct virtqueue_ops *vq_ops;
 	void *priv;
@@ -76,15 +79,16 @@
  * @dev: underlying device.
  * @id: the device type identification (used to match it with a driver).
  * @config: the configuration ops for this device.
+ * @vqs: the list of virtqueues for this device.
  * @features: the features supported by both driver and device.
  * @priv: private pointer for the driver's use.
  */
-struct virtio_device
-{
+struct virtio_device {
 	int index;
 	struct device dev;
 	struct virtio_device_id id;
 	struct virtio_config_ops *config;
+	struct list_head vqs;
 	/* Note that this is a Linux set_bit-style bitmap. */
 	unsigned long features[1];
 	void *priv;
@@ -99,8 +103,7 @@
  * @id_table: the ids serviced by this driver.
  * @feature_table: an array of feature numbers supported by this device.
  * @feature_table_size: number of entries in the feature table array.
- * @probe: the function to call when a device is found.  Returns a token for
- *    remove, or PTR_ERR().
+ * @probe: the function to call when a device is found.  Returns 0 or -errno.
  * @remove: the function when a device is removed.
  * @config_changed: optional function to call when the device configuration
  *    changes; may be called in interrupt context.
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index bf8ec28..99f5145 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -29,6 +29,7 @@
 #define VIRTIO_F_NOTIFY_ON_EMPTY	24
 
 #ifdef __KERNEL__
+#include <linux/err.h>
 #include <linux/virtio.h>
 
 /**
@@ -49,15 +50,26 @@
  * @set_status: write the status byte
  *	vdev: the virtio_device
  *	status: the new status byte
+ * @request_vqs: request the specified number of virtqueues
+ *	vdev: the virtio_device
+ *	max_vqs: the max number of virtqueues we want
+ *      If supplied, must call before any virtqueues are instantiated.
+ *      To modify the max number of virtqueues after request_vqs has been
+ *      called, call free_vqs and then request_vqs with a new value.
+ * @free_vqs: cleanup resources allocated by request_vqs
+ *	vdev: the virtio_device
+ *      If supplied, must call after all virtqueues have been deleted.
  * @reset: reset the device
  *	vdev: the virtio device
  *	After this, status and feature negotiation must be done again
- * @find_vq: find a virtqueue and instantiate it.
+ * @find_vqs: find virtqueues and instantiate them.
  *	vdev: the virtio_device
- *	index: the 0-based virtqueue number in case there's more than one.
- *	callback: the virqtueue callback
- *	Returns the new virtqueue or ERR_PTR() (eg. -ENOENT).
- * @del_vq: free a virtqueue found by find_vq().
+ *	nvqs: the number of virtqueues to find
+ *	vqs: on success, includes new virtqueues
+ *	callbacks: array of callbacks, for each virtqueue
+ *	names: array of virtqueue names (mainly for debugging)
+ *	Returns 0 on success or error status
+ * @del_vqs: free virtqueues found by find_vqs().
  * @get_features: get the array of feature bits for this device.
  *	vdev: the virtio_device
  *	Returns the first 32 feature bits (all we currently need).
@@ -66,6 +78,7 @@
  *	This gives the final feature bits for the device: it can change
  *	the dev->feature bits if it wants.
  */
+typedef void vq_callback_t(struct virtqueue *);
 struct virtio_config_ops
 {
 	void (*get)(struct virtio_device *vdev, unsigned offset,
@@ -75,10 +88,11 @@
 	u8 (*get_status)(struct virtio_device *vdev);
 	void (*set_status)(struct virtio_device *vdev, u8 status);
 	void (*reset)(struct virtio_device *vdev);
-	struct virtqueue *(*find_vq)(struct virtio_device *vdev,
-				     unsigned index,
-				     void (*callback)(struct virtqueue *));
-	void (*del_vq)(struct virtqueue *vq);
+	int (*find_vqs)(struct virtio_device *, unsigned nvqs,
+			struct virtqueue *vqs[],
+			vq_callback_t *callbacks[],
+			const char *names[]);
+	void (*del_vqs)(struct virtio_device *);
 	u32 (*get_features)(struct virtio_device *vdev);
 	void (*finalize_features)(struct virtio_device *vdev);
 };
@@ -99,7 +113,9 @@
 	if (__builtin_constant_p(fbit))
 		BUILD_BUG_ON(fbit >= 32);
 
-	virtio_check_driver_offered_feature(vdev, fbit);
+	if (fbit < VIRTIO_TRANSPORT_F_START)
+		virtio_check_driver_offered_feature(vdev, fbit);
+
 	return test_bit(fbit, vdev->features);
 }
 
@@ -126,5 +142,18 @@
 	vdev->config->get(vdev, offset, buf, len);
 	return 0;
 }
+
+static inline
+struct virtqueue *virtio_find_single_vq(struct virtio_device *vdev,
+					vq_callback_t *c, const char *n)
+{
+	vq_callback_t *callbacks[] = { c };
+	const char *names[] = { n };
+	struct virtqueue *vq;
+	int err = vdev->config->find_vqs(vdev, 1, &vq, callbacks, names);
+	if (err < 0)
+		return ERR_PTR(err);
+	return vq;
+}
 #endif /* __KERNEL__ */
 #endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h
index cd0fd5d..9a3d7c4 100644
--- a/include/linux/virtio_pci.h
+++ b/include/linux/virtio_pci.h
@@ -47,9 +47,17 @@
 /* The bit of the ISR which indicates a device configuration change. */
 #define VIRTIO_PCI_ISR_CONFIG		0x2
 
+/* MSI-X registers: only enabled if MSI-X is enabled. */
+/* A 16-bit vector for configuration changes. */
+#define VIRTIO_MSI_CONFIG_VECTOR        20
+/* A 16-bit vector for selected queue notifications. */
+#define VIRTIO_MSI_QUEUE_VECTOR         22
+/* Vector value used to disable MSI for queue */
+#define VIRTIO_MSI_NO_VECTOR            0xffff
+
 /* The remaining space is defined by each driver as the per-driver
  * configuration space */
-#define VIRTIO_PCI_CONFIG		20
+#define VIRTIO_PCI_CONFIG(dev)		((dev)->msix_enabled ? 24 : 20)
 
 /* Virtio ABI version, this must match exactly */
 #define VIRTIO_PCI_ABI_VERSION		0
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index 71e0372..693e0ec 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -14,6 +14,8 @@
 #define VRING_DESC_F_NEXT	1
 /* This marks a buffer as write-only (otherwise read-only). */
 #define VRING_DESC_F_WRITE	2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT	4
 
 /* The Host uses this in used->flags to advise the Guest: don't kick me when
  * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
@@ -24,6 +26,9 @@
  * optimization.  */
 #define VRING_AVAIL_F_NO_INTERRUPT	1
 
+/* We support indirect buffer descriptors */
+#define VIRTIO_RING_F_INDIRECT_DESC	28
+
 /* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
 struct vring_desc
 {
@@ -119,7 +124,8 @@
 				      struct virtio_device *vdev,
 				      void *pages,
 				      void (*notify)(struct virtqueue *vq),
-				      void (*callback)(struct virtqueue *vq));
+				      void (*callback)(struct virtqueue *vq),
+				      const char *name);
 void vring_del_virtqueue(struct virtqueue *vq);
 /* Filter out transport-specific feature bits. */
 void vring_transport_features(struct virtio_device *vdev);
diff --git a/include/scsi/fc/fc_fip.h b/include/scsi/fc/fc_fip.h
index 0627a9a..3d138c1f 100644
--- a/include/scsi/fc/fc_fip.h
+++ b/include/scsi/fc/fc_fip.h
@@ -22,13 +22,6 @@
  * http://www.t11.org/ftp/t11/pub/fc/bb-5/08-543v1.pdf
  */
 
-/*
- * The FIP ethertype eventually goes in net/if_ether.h.
- */
-#ifndef ETH_P_FIP
-#define ETH_P_FIP	0x8914	/* FIP Ethertype */
-#endif
-
 #define FIP_DEF_PRI	128	/* default selection priority */
 #define FIP_DEF_FC_MAP	0x0efc00 /* default FCoE MAP (MAC OUI) value */
 #define FIP_DEF_FKA	8000	/* default FCF keep-alive/advert period (mS) */
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index d0ed522..4426f00 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -22,6 +22,11 @@
 #define ISCSI_IF_H
 
 #include <scsi/iscsi_proto.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+
+#define ISCSI_NL_GRP_ISCSID	1
+#define ISCSI_NL_GRP_UIP	2
 
 #define UEVENT_BASE			10
 #define KEVENT_BASE			100
@@ -50,7 +55,10 @@
 	ISCSI_UEVENT_TGT_DSCVR		= UEVENT_BASE + 15,
 	ISCSI_UEVENT_SET_HOST_PARAM	= UEVENT_BASE + 16,
 	ISCSI_UEVENT_UNBIND_SESSION	= UEVENT_BASE + 17,
-	ISCSI_UEVENT_CREATE_BOUND_SESSION	= UEVENT_BASE + 18,
+	ISCSI_UEVENT_CREATE_BOUND_SESSION		= UEVENT_BASE + 18,
+	ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST	= UEVENT_BASE + 19,
+
+	ISCSI_UEVENT_PATH_UPDATE	= UEVENT_BASE + 20,
 
 	/* up events */
 	ISCSI_KEVENT_RECV_PDU		= KEVENT_BASE + 1,
@@ -59,6 +67,9 @@
 	ISCSI_KEVENT_DESTROY_SESSION	= KEVENT_BASE + 4,
 	ISCSI_KEVENT_UNBIND_SESSION	= KEVENT_BASE + 5,
 	ISCSI_KEVENT_CREATE_SESSION	= KEVENT_BASE + 6,
+
+	ISCSI_KEVENT_PATH_REQ		= KEVENT_BASE + 7,
+	ISCSI_KEVENT_IF_DOWN		= KEVENT_BASE + 8,
 };
 
 enum iscsi_tgt_dscvr {
@@ -131,6 +142,10 @@
 		struct msg_transport_connect {
 			uint32_t	non_blocking;
 		} ep_connect;
+		struct msg_transport_connect_through_host {
+			uint32_t	host_no;
+			uint32_t	non_blocking;
+		} ep_connect_through_host;
 		struct msg_transport_poll {
 			uint64_t	ep_handle;
 			uint32_t	timeout_ms;
@@ -154,6 +169,9 @@
 			uint32_t	param; /* enum iscsi_host_param */
 			uint32_t	len;
 		} set_host_param;
+		struct msg_set_path {
+			uint32_t	host_no;
+		} set_path;
 	} u;
 	union {
 		/* messages k -> u */
@@ -187,10 +205,39 @@
 		struct msg_transport_connect_ret {
 			uint64_t	handle;
 		} ep_connect_ret;
+		struct msg_req_path {
+			uint32_t	host_no;
+		} req_path;
+		struct msg_notify_if_down {
+			uint32_t	host_no;
+		} notify_if_down;
 	} r;
 } __attribute__ ((aligned (sizeof(uint64_t))));
 
 /*
+ * To keep the struct iscsi_uevent size the same for userspace code
+ * compatibility, the main structure for ISCSI_UEVENT_PATH_UPDATE and
+ * ISCSI_KEVENT_PATH_REQ is defined separately and comes after the
+ * struct iscsi_uevent in the NETLINK_ISCSI message.
+ */
+struct iscsi_path {
+	uint64_t	handle;
+	uint8_t		mac_addr[6];
+	uint8_t		mac_addr_old[6];
+	uint32_t	ip_addr_len;	/* 4 or 16 */
+	union {
+		struct in_addr	v4_addr;
+		struct in6_addr	v6_addr;
+	} src;
+	union {
+		struct in_addr	v4_addr;
+		struct in6_addr	v6_addr;
+	} dst;
+	uint16_t	vlan_id;
+	uint16_t	pmtu;
+} __attribute__ ((aligned (sizeof(uint64_t))));
+
+/*
  * Common error codes
  */
 enum iscsi_err {
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 45f9cc6..ebdd9f4 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -679,6 +679,7 @@
 	unsigned int		e_d_tov;
 	unsigned int		r_a_tov;
 	u8			max_retry_count;
+	u8			max_rport_retry_count;
 	u16			link_speed;
 	u16			link_supported_speeds;
 	u16			lro_xid;	/* max xid for fcoe lro */
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 0289f57..196525c 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -82,9 +82,12 @@
 
 
 enum {
+	ISCSI_TASK_FREE,
 	ISCSI_TASK_COMPLETED,
 	ISCSI_TASK_PENDING,
 	ISCSI_TASK_RUNNING,
+	ISCSI_TASK_ABRT_TMF,		/* aborted due to TMF */
+	ISCSI_TASK_ABRT_SESS_RECOV,	/* aborted due to session recovery */
 };
 
 struct iscsi_r2t_info {
@@ -181,9 +184,7 @@
 
 	/* xmit */
 	struct list_head	mgmtqueue;	/* mgmt (control) xmit queue */
-	struct list_head	mgmt_run_list;	/* list of control tasks */
-	struct list_head	xmitqueue;	/* data-path cmd queue */
-	struct list_head	run_list;	/* list of cmds in progress */
+	struct list_head	cmdqueue;	/* data-path cmd queue */
 	struct list_head	requeue;	/* tasks needing another run */
 	struct work_struct	xmitwork;	/* per-conn. xmit workqueue */
 	unsigned long		suspend_tx;	/* suspend Tx */
@@ -406,6 +407,7 @@
 				char *, int);
 extern int iscsi_verify_itt(struct iscsi_conn *, itt_t);
 extern struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *, itt_t);
+extern struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *, itt_t);
 extern void iscsi_requeue_task(struct iscsi_task *task);
 extern void iscsi_put_task(struct iscsi_task *task);
 extern void __iscsi_get_task(struct iscsi_task *task);
diff --git a/include/scsi/osd_attributes.h b/include/scsi/osd_attributes.h
index f888a6f..56e920a 100644
--- a/include/scsi/osd_attributes.h
+++ b/include/scsi/osd_attributes.h
@@ -29,6 +29,7 @@
 	OSD_APAGE_PARTITION_INFORMATION = OSD_APAGE_PARTITION_FIRST + 1,
 	OSD_APAGE_PARTITION_QUOTAS	= OSD_APAGE_PARTITION_FIRST + 2,
 	OSD_APAGE_PARTITION_TIMESTAMP	= OSD_APAGE_PARTITION_FIRST + 3,
+	OSD_APAGE_PARTITION_ATTR_ACCESS = OSD_APAGE_PARTITION_FIRST + 4,
 	OSD_APAGE_PARTITION_SECURITY	= OSD_APAGE_PARTITION_FIRST + 5,
 	OSD_APAGE_PARTITION_LAST	= 0x5FFFFFFF,
 
@@ -51,7 +52,9 @@
 	OSD_APAGE_RESERVED_TYPE_LAST	= 0xEFFFFFFF,
 
 	OSD_APAGE_COMMON_FIRST		= 0xF0000000,
-	OSD_APAGE_COMMON_LAST		= 0xFFFFFFFE,
+	OSD_APAGE_COMMON_LAST		= 0xFFFFFFFD,
+
+	OSD_APAGE_CURRENT_COMMAND	= 0xFFFFFFFE,
 
 	OSD_APAGE_REQUEST_ALL		= 0xFFFFFFFF,
 };
@@ -106,10 +109,30 @@
 	OSD_ATTR_RI_PRODUCT_REVISION_LEVEL   = 0x7,   /* 4        */
 	OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER    = 0x8,   /* variable */
 	OSD_ATTR_RI_OSD_NAME                 = 0x9,   /* variable */
+	OSD_ATTR_RI_MAX_CDB_CONTINUATION_LEN = 0xA,   /* 4        */
 	OSD_ATTR_RI_TOTAL_CAPACITY           = 0x80,  /* 8        */
 	OSD_ATTR_RI_USED_CAPACITY            = 0x81,  /* 8        */
 	OSD_ATTR_RI_NUMBER_OF_PARTITIONS     = 0xC0,  /* 8        */
 	OSD_ATTR_RI_CLOCK                    = 0x100, /* 6        */
+	OARI_DEFAULT_ISOLATION_METHOD        = 0X110, /* 1        */
+	OARI_SUPPORTED_ISOLATION_METHODS     = 0X111, /* 32       */
+
+	OARI_DATA_ATOMICITY_GUARANTEE                   = 0X120,   /* 8       */
+	OARI_DATA_ATOMICITY_ALIGNMENT                   = 0X121,   /* 8       */
+	OARI_ATTRIBUTES_ATOMICITY_GUARANTEE             = 0X122,   /* 8       */
+	OARI_DATA_ATTRIBUTES_ATOMICITY_MULTIPLIER       = 0X123,   /* 1       */
+
+	OARI_MAXIMUM_SNAPSHOTS_COUNT                    = 0X1C1,    /* 0 or 4 */
+	OARI_MAXIMUM_CLONES_COUNT                       = 0X1C2,    /* 0 or 4 */
+	OARI_MAXIMUM_BRANCH_DEPTH                       = 0X1CC,    /* 0 or 4 */
+	OARI_SUPPORTED_OBJECT_DUPLICATION_METHOD_FIRST  = 0X200,    /* 0 or 4 */
+	OARI_SUPPORTED_OBJECT_DUPLICATION_METHOD_LAST   = 0X2ff,    /* 0 or 4 */
+	OARI_SUPPORTED_TIME_OF_DUPLICATION_METHOD_FIRST = 0X300,    /* 0 or 4 */
+	OARI_SUPPORTED_TIME_OF_DUPLICATION_METHOD_LAST  = 0X30F,    /* 0 or 4 */
+	OARI_SUPPORT_FOR_DUPLICATED_OBJECT_FREEZING     = 0X310,    /* 0 or 4 */
+	OARI_SUPPORT_FOR_SNAPSHOT_REFRESHING            = 0X311,    /* 0 or 1 */
+	OARI_SUPPORTED_CDB_CONTINUATION_DESC_TYPE_FIRST = 0X7000001,/* 0 or 4 */
+	OARI_SUPPORTED_CDB_CONTINUATION_DESC_TYPE_LAST  = 0X700FFFF,/* 0 or 4 */
 };
 /* Root_Information_attributes_page does not have a get_page structure */
 
@@ -120,7 +143,15 @@
 	OSD_ATTR_PI_PARTITION_ID            = 0x1,     /* 8        */
 	OSD_ATTR_PI_USERNAME                = 0x9,     /* variable */
 	OSD_ATTR_PI_USED_CAPACITY           = 0x81,    /* 8        */
+	OSD_ATTR_PI_USED_CAPACITY_INCREMENT = 0x84,    /* 0 or 8   */
 	OSD_ATTR_PI_NUMBER_OF_OBJECTS       = 0xC1,    /* 8        */
+
+	OSD_ATTR_PI_ACTUAL_DATA_SPACE                      = 0xD1, /* 0 or 8 */
+	OSD_ATTR_PI_RESERVED_DATA_SPACE                    = 0xD2, /* 0 or 8 */
+	OSD_ATTR_PI_DEFAULT_SNAPSHOT_DUPLICATION_METHOD    = 0x200,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_CLONE_DUPLICATION_METHOD       = 0x201,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_SP_TIME_OF_DUPLICATION         = 0x300,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_CLONE_TIME_OF_DUPLICATION      = 0x301,/* 0 or 4 */
 };
 /* Partition Information attributes page does not have a get_page structure */
 
@@ -131,6 +162,7 @@
 	OSD_ATTR_CI_PARTITION_ID           = 0x1,       /* 8        */
 	OSD_ATTR_CI_COLLECTION_OBJECT_ID   = 0x2,       /* 8        */
 	OSD_ATTR_CI_USERNAME               = 0x9,       /* variable */
+	OSD_ATTR_CI_COLLECTION_TYPE        = 0xA,       /* 1        */
 	OSD_ATTR_CI_USED_CAPACITY          = 0x81,      /* 8        */
 };
 /* Collection Information attributes page does not have a get_page structure */
@@ -144,6 +176,8 @@
 	OSD_ATTR_OI_USERNAME             = 0x9,       /* variable */
 	OSD_ATTR_OI_USED_CAPACITY        = 0x81,      /* 8        */
 	OSD_ATTR_OI_LOGICAL_LENGTH       = 0x82,      /* 8        */
+	SD_ATTR_OI_ACTUAL_DATA_SPACE     = 0XD1,      /* 0 OR 8   */
+	SD_ATTR_OI_RESERVED_DATA_SPACE   = 0XD2,      /* 0 OR 8   */
 };
 /* Object Information attributes page does not have a get_page structure */
 
@@ -248,7 +282,18 @@
 	struct osd_timestamp data_modified_time;
 }  __packed;
 
-/* 7.1.2.19 Collections attributes page */
+/* OSD2r05: 7.1.3.19 Attributes Access attributes page
+ * (OSD_APAGE_PARTITION_ATTR_ACCESS)
+ *
+ * each attribute is of the form below. Total array length is deduced
+ * from the attribute's length
+ * (See allowed_attributes_access of the struct osd_cap_object_descriptor)
+ */
+struct attributes_access_attr {
+	struct osd_attributes_list_attrid attr_list[0];
+} __packed;
+
+/* OSD2r05: 7.1.2.21 Collections attributes page */
 /* TBD */
 
 /* 7.1.2.20 Root Policy/Security attributes page (OSD_APAGE_ROOT_SECURITY) */
@@ -324,4 +369,29 @@
 	__be32 policy_access_tag;
 }  __packed;
 
+/* OSD2r05: 7.1.3.31 Current Command attributes page
+ * (OSD_APAGE_CURRENT_COMMAND)
+ */
+enum {
+	OSD_ATTR_CC_RESPONSE_INTEGRITY_CHECK_VALUE     = 0x1, /* 32  */
+	OSD_ATTR_CC_OBJECT_TYPE                        = 0x2, /* 1   */
+	OSD_ATTR_CC_PARTITION_ID                       = 0x3, /* 8   */
+	OSD_ATTR_CC_OBJECT_ID                          = 0x4, /* 8   */
+	OSD_ATTR_CC_STARTING_BYTE_ADDRESS_OF_APPEND    = 0x5, /* 8   */
+	OSD_ATTR_CC_CHANGE_IN_USED_CAPACITY            = 0x6, /* 8   */
+};
+
+/*TBD: osdv1_current_command_attributes_page */
+
+struct osdv2_current_command_attributes_page {
+	struct osd_attr_page_header hdr;  /* id=0xFFFFFFFE, size=0x44 */
+	u8 response_integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+	u8 object_type;
+	u8 reserved[3];
+	__be64 partition_id;
+	__be64 object_id;
+	__be64 starting_byte_address_of_append;
+	__be64 change_in_used_capacity;
+};
+
 #endif /*ndef __OSD_ATTRIBUTES_H__*/
diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h
index b24d961..02bd9f7 100644
--- a/include/scsi/osd_initiator.h
+++ b/include/scsi/osd_initiator.h
@@ -18,6 +18,7 @@
 #include "osd_types.h"
 
 #include <linux/blkdev.h>
+#include <scsi/scsi_device.h>
 
 /* Note: "NI" in comments below means "Not Implemented yet" */
 
@@ -47,6 +48,7 @@
  */
 struct osd_dev {
 	struct scsi_device *scsi_device;
+	struct file *file;
 	unsigned def_timeout;
 
 #ifdef OSD_VER1_SUPPORT
@@ -69,6 +71,10 @@
 
 /* some hi level device operations */
 int osd_auto_detect_ver(struct osd_dev *od, void *caps);    /* GFP_KERNEL */
+static inline struct request_queue *osd_request_queue(struct osd_dev *od)
+{
+	return od->scsi_device->request_queue;
+}
 
 /* we might want to use function vector in the future */
 static inline void osd_dev_set_ver(struct osd_dev *od, enum osd_std_version v)
@@ -363,7 +369,9 @@
 void osd_req_remove_object(struct osd_request *or, struct osd_obj_id *);
 
 void osd_req_write(struct osd_request *or,
-	const struct osd_obj_id *, struct bio *data_out, u64 offset);
+	const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len);
+int osd_req_write_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
 void osd_req_append(struct osd_request *or,
 	const struct osd_obj_id *, struct bio *data_out);/* NI */
 void osd_req_create_write(struct osd_request *or,
@@ -378,7 +386,9 @@
 	/*V2*/ u64 offset, /*V2*/ u64 len);
 
 void osd_req_read(struct osd_request *or,
-	const struct osd_obj_id *, struct bio *data_in, u64 offset);
+	const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len);
+int osd_req_read_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
 
 /*
  * Root/Partition/Collection/Object Attributes commands
diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h
index 62b2ab8..2cc8e8b 100644
--- a/include/scsi/osd_protocol.h
+++ b/include/scsi/osd_protocol.h
@@ -303,7 +303,15 @@
 	OSD_ACT_V2(REMOVE_MEMBER_OBJECTS,	0x21)
 	OSD_ACT_V2(GET_MEMBER_ATTRIBUTES,	0x22)
 	OSD_ACT_V2(SET_MEMBER_ATTRIBUTES,	0x23)
+
+	OSD_ACT_V2(CREATE_CLONE,		0x28)
+	OSD_ACT_V2(CREATE_SNAPSHOT,		0x29)
+	OSD_ACT_V2(DETACH_CLONE,		0x2A)
+	OSD_ACT_V2(REFRESH_SNAPSHOT_CLONE,	0x2B)
+	OSD_ACT_V2(RESTORE_PARTITION_FROM_SNAPSHOT, 0x2C)
+
 	OSD_ACT_V2(READ_MAP,			0x31)
+	OSD_ACT_V2(READ_MAPS_COMPARE,		0x32)
 
 	OSD_ACT_V1_V2(PERFORM_SCSI_COMMAND,	0x8F7E, 0x8F7C)
 	OSD_ACT_V1_V2(SCSI_TASK_MANAGEMENT,	0x8F7F, 0x8F7D)
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index 457588e..349c7f3 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -126,12 +126,14 @@
 			       int *index, int *age);
 
 	void (*session_recovery_timedout) (struct iscsi_cls_session *session);
-	struct iscsi_endpoint *(*ep_connect) (struct sockaddr *dst_addr,
+	struct iscsi_endpoint *(*ep_connect) (struct Scsi_Host *shost,
+					      struct sockaddr *dst_addr,
 					      int non_blocking);
 	int (*ep_poll) (struct iscsi_endpoint *ep, int timeout_ms);
 	void (*ep_disconnect) (struct iscsi_endpoint *ep);
 	int (*tgt_dscvr) (struct Scsi_Host *shost, enum iscsi_tgt_dscvr type,
 			  uint32_t enable, struct sockaddr *dst_addr);
+	int (*set_path) (struct Scsi_Host *shost, struct iscsi_path *params);
 };
 
 /*
@@ -148,6 +150,10 @@
 extern int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
 			  char *data, uint32_t data_size);
 
+extern int iscsi_offload_mesg(struct Scsi_Host *shost,
+			      struct iscsi_transport *transport, uint32_t type,
+			      char *data, uint16_t data_size);
+
 struct iscsi_cls_conn {
 	struct list_head conn_list;	/* item in connlist */
 	void *dd_data;			/* LLD private data */
diff --git a/include/sound/asound.h b/include/sound/asound.h
index 6add80f..82aed3f 100644
--- a/include/sound/asound.h
+++ b/include/sound/asound.h
@@ -255,6 +255,7 @@
 #define SNDRV_PCM_INFO_HALF_DUPLEX	0x00100000	/* only half duplex */
 #define SNDRV_PCM_INFO_JOINT_DUPLEX	0x00200000	/* playback and capture stream are somewhat correlated */
 #define SNDRV_PCM_INFO_SYNC_START	0x00400000	/* pcm support some kind of sync go */
+#define SNDRV_PCM_INFO_FIFO_IN_FRAMES	0x80000000	/* internal kernel flag - FIFO size is in frames */
 
 typedef int __bitwise snd_pcm_state_t;
 #define	SNDRV_PCM_STATE_OPEN		((__force snd_pcm_state_t) 0) /* stream is open */
diff --git a/include/sound/core.h b/include/sound/core.h
index 3dea798..309cb96 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -300,19 +300,10 @@
 		    struct module *module, int extra_size,
 		    struct snd_card **card_ret);
 
-static inline __deprecated
-struct snd_card *snd_card_new(int idx, const char *id,
-			      struct module *module, int extra_size)
-{
-	struct snd_card *card;
-	if (snd_card_create(idx, id, module, extra_size, &card) < 0)
-		return NULL;
-	return card;
-}
-
 int snd_card_disconnect(struct snd_card *card);
 int snd_card_free(struct snd_card *card);
 int snd_card_free_when_closed(struct snd_card *card);
+void snd_card_set_id(struct snd_card *card, const char *id);
 int snd_card_register(struct snd_card *card);
 int snd_card_info_init(void);
 int snd_card_info_done(void);
diff --git a/include/sound/driver.h b/include/sound/driver.h
deleted file mode 100644
index f035943..0000000
--- a/include/sound/driver.h
+++ /dev/null
@@ -1 +0,0 @@
-#warning "This file is deprecated"
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index c172968..2389352 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -98,6 +98,7 @@
 #define SNDRV_PCM_IOCTL1_INFO		1
 #define SNDRV_PCM_IOCTL1_CHANNEL_INFO	2
 #define SNDRV_PCM_IOCTL1_GSTATE		3
+#define SNDRV_PCM_IOCTL1_FIFO_SIZE	4
 
 #define SNDRV_PCM_TRIGGER_STOP		0
 #define SNDRV_PCM_TRIGGER_START		1
@@ -270,6 +271,7 @@
 	snd_pcm_uframes_t hw_ptr_base;	/* Position at buffer restart */
 	snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time */
 	unsigned long hw_ptr_jiffies;	/* Time when hw_ptr is updated */
+	snd_pcm_sframes_t delay;	/* extra delay; typically FIFO size */
 
 	/* -- HW params -- */
 	snd_pcm_access_t access;	/* access mode */
@@ -486,80 +488,6 @@
 void snd_pcm_vma_notify_data(void *client, void *data);
 int snd_pcm_mmap_data(struct snd_pcm_substream *substream, struct file *file, struct vm_area_struct *area);
 
-#if BITS_PER_LONG >= 64
-
-static inline void div64_32(u_int64_t *n, u_int32_t div, u_int32_t *rem)
-{
-	*rem = *n % div;
-	*n /= div;
-}
-
-#elif defined(i386)
-
-static inline void div64_32(u_int64_t *n, u_int32_t div, u_int32_t *rem)
-{
-	u_int32_t low, high;
-	low = *n & 0xffffffff;
-	high = *n >> 32;
-	if (high) {
-		u_int32_t high1 = high % div;
-		high /= div;
-		asm("divl %2":"=a" (low), "=d" (*rem):"rm" (div), "a" (low), "d" (high1));
-		*n = (u_int64_t)high << 32 | low;
-	} else {
-		*n = low / div;
-		*rem = low % div;
-	}
-}
-#else
-
-static inline void divl(u_int32_t high, u_int32_t low,
-			u_int32_t div,
-			u_int32_t *q, u_int32_t *r)
-{
-	u_int64_t n = (u_int64_t)high << 32 | low;
-	u_int64_t d = (u_int64_t)div << 31;
-	u_int32_t q1 = 0;
-	int c = 32;
-	while (n > 0xffffffffU) {
-		q1 <<= 1;
-		if (n >= d) {
-			n -= d;
-			q1 |= 1;
-		}
-		d >>= 1;
-		c--;
-	}
-	q1 <<= c;
-	if (n) {
-		low = n;
-		*q = q1 | (low / div);
-		*r = low % div;
-	} else {
-		*r = 0;
-		*q = q1;
-	}
-	return;
-}
-
-static inline void div64_32(u_int64_t *n, u_int32_t div, u_int32_t *rem)
-{
-	u_int32_t low, high;
-	low = *n & 0xffffffff;
-	high = *n >> 32;
-	if (high) {
-		u_int32_t high1 = high % div;
-		u_int32_t low1 = low;
-		high /= div;
-		divl(high1, low1, div, &low, rem);
-		*n = (u_int64_t)high << 32 | low;
-	} else {
-		*n = low / div;
-		*rem = low % div;
-	}
-}
-#endif
-
 /*
  *  PCM library
  */
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index 1367647..352d7ee 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -45,24 +45,6 @@
 #define SND_SOC_DAIFMT_GATED		(1 << 4) /* clock is gated */
 
 /*
- * DAI Left/Right Clocks.
- *
- * Specifies whether the DAI can support different samples for similtanious
- * playback and capture. This usually requires a seperate physical frame
- * clock for playback and capture.
- */
-#define SND_SOC_DAIFMT_SYNC		(0 << 5) /* Tx FRM = Rx FRM */
-#define SND_SOC_DAIFMT_ASYNC		(1 << 5) /* Tx FRM ~ Rx FRM */
-
-/*
- * TDM
- *
- * Time Division Multiplexing. Allows PCM data to be multplexed with other
- * data on the DAI.
- */
-#define SND_SOC_DAIFMT_TDM		(1 << 6)
-
-/*
  * DAI hardware signal inversions.
  *
  * Specifies whether the DAI can also support inverted clocks for the specified
@@ -96,6 +78,10 @@
 #define SND_SOC_CLOCK_IN		0
 #define SND_SOC_CLOCK_OUT		1
 
+#define SND_SOC_STD_AC97_FMTS (SNDRV_PCM_FMTBIT_S16_LE |\
+                               SNDRV_PCM_FMTBIT_S32_LE |\
+                               SNDRV_PCM_FMTBIT_S32_BE)
+
 struct snd_soc_dai_ops;
 struct snd_soc_dai;
 struct snd_ac97_bus_ops;
@@ -208,6 +194,7 @@
 	/* DAI capabilities */
 	struct snd_soc_pcm_stream capture;
 	struct snd_soc_pcm_stream playback;
+	unsigned int symmetric_rates:1;
 
 	/* DAI runtime info */
 	struct snd_pcm_runtime *runtime;
@@ -219,11 +206,8 @@
 	/* DAI private data */
 	void *private_data;
 
-	/* parent codec/platform */
-	union {
-		struct snd_soc_codec *codec;
-		struct snd_soc_platform *platform;
-	};
+	/* parent platform */
+	struct snd_soc_platform *platform;
 
 	struct list_head list;
 };
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index a7def6a..ec8a45f 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -140,16 +140,30 @@
 #define SND_SOC_DAPM_DAC(wname, stname, wreg, wshift, winvert) \
 {	.id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \
 	.shift = wshift, .invert = winvert}
+#define SND_SOC_DAPM_DAC_E(wname, stname, wreg, wshift, winvert, \
+			   wevent, wflags)				\
+{	.id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \
+	.shift = wshift, .invert = winvert, \
+	.event = wevent, .event_flags = wflags}
 #define SND_SOC_DAPM_ADC(wname, stname, wreg, wshift, winvert) \
 {	.id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \
 	.shift = wshift, .invert = winvert}
+#define SND_SOC_DAPM_ADC_E(wname, stname, wreg, wshift, winvert, \
+			   wevent, wflags)				\
+{	.id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \
+	.shift = wshift, .invert = winvert, \
+	.event = wevent, .event_flags = wflags}
 
-/* generic register modifier widget */
+/* generic widgets */
 #define SND_SOC_DAPM_REG(wid, wname, wreg, wshift, wmask, won_val, woff_val) \
 {	.id = wid, .name = wname, .kcontrols = NULL, .num_kcontrols = 0, \
 	.reg = -((wreg) + 1), .shift = wshift, .mask = wmask, \
 	.on_val = won_val, .off_val = woff_val, .event = dapm_reg_event, \
 	.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD}
+#define SND_SOC_DAPM_SUPPLY(wname, wreg, wshift, winvert, wevent, wflags) \
+{	.id = snd_soc_dapm_supply, .name = wname, .reg = wreg,	\
+	.shift = wshift, .invert = winvert, .event = wevent, \
+	.event_flags = wflags}
 
 /* dapm kcontrol types */
 #define SOC_DAPM_SINGLE(xname, reg, shift, max, invert) \
@@ -265,8 +279,6 @@
 /* dapm events */
 int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, char *stream,
 	int event);
-int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
-	enum snd_soc_bias_level level);
 
 /* dapm sys fs - used by the core */
 int snd_soc_dapm_sys_add(struct device *dev);
@@ -298,6 +310,7 @@
 	snd_soc_dapm_vmid,			/* codec bias/vmid - to minimise pops */
 	snd_soc_dapm_pre,			/* machine specific pre widget - exec first */
 	snd_soc_dapm_post,			/* machine specific post widget - exec last */
+	snd_soc_dapm_supply,		/* power/clock supply */
 };
 
 /*
@@ -357,6 +370,8 @@
 	unsigned char suspend:1;		/* was active before suspend */
 	unsigned char pmdown:1;			/* waiting for timeout */
 
+	int (*power_check)(struct snd_soc_dapm_widget *w);
+
 	/* external events */
 	unsigned short event_flags;		/* flags to specify event types */
 	int (*event)(struct snd_soc_dapm_widget*, struct snd_kcontrol *, int);
@@ -368,6 +383,9 @@
 	/* widget input and outputs */
 	struct list_head sources;
 	struct list_head sinks;
+
+	/* used during DAPM updates */
+	struct list_head power_list;
 };
 
 #endif
diff --git a/include/sound/soc.h b/include/sound/soc.h
index a40bc6f..cf6111d 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -118,6 +118,14 @@
 	.info = snd_soc_info_volsw, \
 	.get = xhandler_get, .put = xhandler_put, \
 	.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) }
+#define SOC_DOUBLE_EXT(xname, xreg, shift_left, shift_right, xmax, xinvert,\
+	 xhandler_get, xhandler_put) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
+	.info = snd_soc_info_volsw, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = (unsigned long)&(struct soc_mixer_control) \
+		{.reg = xreg, .shift = shift_left, .rshift = shift_right, \
+		 .max = xmax, .invert = xinvert} }
 #define SOC_SINGLE_EXT_TLV(xname, xreg, xshift, xmax, xinvert,\
 	 xhandler_get, xhandler_put, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
@@ -206,10 +214,6 @@
 			struct snd_soc_jack_gpio *gpios);
 #endif
 
-/* codec IO */
-#define snd_soc_read(codec, reg) codec->read(codec, reg)
-#define snd_soc_write(codec, reg, value) codec->write(codec, reg, value)
-
 /* codec register bit access */
 int snd_soc_update_bits(struct snd_soc_codec *codec, unsigned short reg,
 				unsigned short mask, unsigned short value);
@@ -331,6 +335,7 @@
 	struct module *owner;
 	struct mutex mutex;
 	struct device *dev;
+	struct snd_soc_device *socdev;
 
 	struct list_head list;
 
@@ -364,6 +369,8 @@
 	enum snd_soc_bias_level bias_level;
 	enum snd_soc_bias_level suspend_bias_level;
 	struct delayed_work delayed_work;
+	struct list_head up_list;
+	struct list_head down_list;
 
 	/* codec DAI's */
 	struct snd_soc_dai *dai;
@@ -417,6 +424,12 @@
 	/* codec/machine specific init - e.g. add machine controls */
 	int (*init)(struct snd_soc_codec *codec);
 
+	/* Symmetry requirements */
+	unsigned int symmetric_rates:1;
+
+	/* Symmetry data - only valid if symmetry is being enforced */
+	unsigned int rate;
+
 	/* DAI pcm */
 	struct snd_pcm *pcm;
 };
@@ -490,6 +503,19 @@
 	void *dapm;
 };
 
+/* codec IO */
+static inline unsigned int snd_soc_read(struct snd_soc_codec *codec,
+					unsigned int reg)
+{
+	return codec->read(codec, reg);
+}
+
+static inline unsigned int snd_soc_write(struct snd_soc_codec *codec,
+					 unsigned int reg, unsigned int val)
+{
+	return codec->write(codec, reg, val);
+}
+
 #include <sound/soc-dai.h>
 
 #endif
diff --git a/include/sound/wm9081.h b/include/sound/wm9081.h
new file mode 100644
index 0000000..e173ddb
--- /dev/null
+++ b/include/sound/wm9081.h
@@ -0,0 +1,25 @@
+/*
+ * linux/sound/wm9081.h -- Platform data for WM9081
+ *
+ * Copyright 2009 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM_9081_H
+#define __LINUX_SND_WM_9081_H
+
+struct wm9081_retune_mobile_setting {
+	const char *name;
+	unsigned int rate;
+	u16 config[20];
+};
+
+struct wm9081_retune_mobile_config {
+	struct wm9081_retune_mobile_setting *configs;
+	int num_configs;
+};
+
+#endif
diff --git a/init/main.c b/init/main.c
index 5616661..f6204f7 100644
--- a/init/main.c
+++ b/init/main.c
@@ -539,6 +539,11 @@
  */
 static void __init mm_init(void)
 {
+	/*
+	 * page_cgroup requires countinous pages as memmap
+	 * and it's bigger than MAX_ORDER unless SPARSEMEM.
+	 */
+	page_cgroup_init_flatmem();
 	mem_init();
 	kmem_cache_init();
 	vmalloc_init();
@@ -635,6 +640,7 @@
 				 "enabled early\n");
 	early_boot_irqs_on();
 	local_irq_enable();
+	kmem_cache_init_late();
 
 	/*
 	 * HACK ALERT! This is early. We're enabling the console before
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 1045785..065205b 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -45,7 +45,7 @@
 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
 static void __init init_irq_default_affinity(void)
 {
-	alloc_bootmem_cpumask_var(&irq_default_affinity);
+	alloc_cpumask_var(&irq_default_affinity, GFP_NOWAIT);
 	cpumask_setall(irq_default_affinity);
 }
 #else
diff --git a/kernel/module.c b/kernel/module.c
index 35f7de0..e4ab36c 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2455,6 +2455,7 @@
 	mutex_lock(&module_mutex);
 	/* Drop initial reference. */
 	module_put(mod);
+	trim_init_extable(mod);
 	module_free(mod, mod->module_init);
 	mod->module_init = NULL;
 	mod->init_size = 0;
diff --git a/kernel/params.c b/kernel/params.c
index de273ec..7f6912c 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -24,9 +24,6 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
-/* We abuse the high bits of "perm" to record whether we kmalloc'ed. */
-#define KPARAM_KMALLOCED	0x80000000
-
 #if 0
 #define DEBUGP printk
 #else
@@ -220,13 +217,13 @@
 		return -ENOSPC;
 	}
 
-	if (kp->perm & KPARAM_KMALLOCED)
+	if (kp->flags & KPARAM_KMALLOCED)
 		kfree(*(char **)kp->arg);
 
 	/* This is a hack.  We can't need to strdup in early boot, and we
 	 * don't need to; this mangled commandline is preserved. */
 	if (slab_is_available()) {
-		kp->perm |= KPARAM_KMALLOCED;
+		kp->flags |= KPARAM_KMALLOCED;
 		*(char **)kp->arg = kstrdup(val, GFP_KERNEL);
 		if (!kp->arg)
 			return -ENOMEM;
@@ -241,44 +238,63 @@
 	return sprintf(buffer, "%s", *((char **)kp->arg));
 }
 
+/* Actually could be a bool or an int, for historical reasons. */
 int param_set_bool(const char *val, struct kernel_param *kp)
 {
+	bool v;
+
 	/* No equals means "set"... */
 	if (!val) val = "1";
 
 	/* One of =[yYnN01] */
 	switch (val[0]) {
 	case 'y': case 'Y': case '1':
-		*(int *)kp->arg = 1;
-		return 0;
+		v = true;
+		break;
 	case 'n': case 'N': case '0':
-		*(int *)kp->arg = 0;
-		return 0;
+		v = false;
+		break;
+	default:
+		return -EINVAL;
 	}
-	return -EINVAL;
+
+	if (kp->flags & KPARAM_ISBOOL)
+		*(bool *)kp->arg = v;
+	else
+		*(int *)kp->arg = v;
+	return 0;
 }
 
 int param_get_bool(char *buffer, struct kernel_param *kp)
 {
+	bool val;
+	if (kp->flags & KPARAM_ISBOOL)
+		val = *(bool *)kp->arg;
+	else
+		val = *(int *)kp->arg;
+
 	/* Y and N chosen as being relatively non-coder friendly */
-	return sprintf(buffer, "%c", (*(int *)kp->arg) ? 'Y' : 'N');
+	return sprintf(buffer, "%c", val ? 'Y' : 'N');
 }
 
+/* This one must be bool. */
 int param_set_invbool(const char *val, struct kernel_param *kp)
 {
-	int boolval, ret;
+	int ret;
+	bool boolval;
 	struct kernel_param dummy;
 
 	dummy.arg = &boolval;
+	dummy.flags = KPARAM_ISBOOL;
 	ret = param_set_bool(val, &dummy);
 	if (ret == 0)
-		*(int *)kp->arg = !boolval;
+		*(bool *)kp->arg = !boolval;
 	return ret;
 }
 
 int param_get_invbool(char *buffer, struct kernel_param *kp)
 {
-	return sprintf(buffer, "%c", (*(int *)kp->arg) ? 'N' : 'Y');
+	return sprintf(buffer, "%c", (*(bool *)kp->arg) ? 'N' : 'Y');
 }
 
 /* We break the rule and mangle the string. */
@@ -591,7 +607,7 @@
 	unsigned int i;
 
 	for (i = 0; i < num; i++)
-		if (params[i].perm & KPARAM_KMALLOCED)
+		if (params[i].flags & KPARAM_KMALLOCED)
 			kfree(*(char **)params[i].arg);
 }
 
diff --git a/kernel/sched.c b/kernel/sched.c
index f04aa96..8ec9d13 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -2192,6 +2192,7 @@
 		smp_send_reschedule(cpu);
 	preempt_enable();
 }
+EXPORT_SYMBOL_GPL(kick_process);
 
 /*
  * Return a low guess at the load of a migration-source cpu weighted
diff --git a/lib/extable.c b/lib/extable.c
index 179c087..4cac81e 100644
--- a/lib/extable.c
+++ b/lib/extable.c
@@ -39,7 +39,26 @@
 	sort(start, finish - start, sizeof(struct exception_table_entry),
 	     cmp_ex, NULL);
 }
-#endif
+
+#ifdef CONFIG_MODULES
+/*
+ * If the exception table is sorted, any referring to the module init
+ * will be at the beginning or the end.
+ */
+void trim_init_extable(struct module *m)
+{
+	/*trim the beginning*/
+	while (m->num_exentries && within_module_init(m->extable[0].insn, m)) {
+		m->extable++;
+		m->num_exentries--;
+	}
+	/*trim the end*/
+	while (m->num_exentries &&
+		within_module_init(m->extable[m->num_exentries-1].insn, m))
+		m->num_exentries--;
+}
+#endif /* CONFIG_MODULES */
+#endif /* !ARCH_HAS_SORT_EXTABLE */
 
 #ifndef ARCH_HAS_SEARCH_EXTABLE
 /*
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 3dd4a90..11a8a10 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -47,8 +47,6 @@
 	struct page_cgroup *base, *pc;
 	unsigned long table_size;
 	unsigned long start_pfn, nr_pages, index;
-	struct page *page;
-	unsigned int order;
 
 	start_pfn = NODE_DATA(nid)->node_start_pfn;
 	nr_pages = NODE_DATA(nid)->node_spanned_pages;
@@ -57,13 +55,11 @@
 		return 0;
 
 	table_size = sizeof(struct page_cgroup) * nr_pages;
-	order = get_order(table_size);
-	page = alloc_pages_node(nid, GFP_NOWAIT | __GFP_ZERO, order);
-	if (!page)
-		page = alloc_pages_node(-1, GFP_NOWAIT | __GFP_ZERO, order);
-	if (!page)
+
+	base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
+			table_size, PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
+	if (!base)
 		return -ENOMEM;
-	base = page_address(page);
 	for (index = 0; index < nr_pages; index++) {
 		pc = base + index;
 		__init_page_cgroup(pc, start_pfn + index);
@@ -73,7 +69,7 @@
 	return 0;
 }
 
-void __init page_cgroup_init(void)
+void __init page_cgroup_init_flatmem(void)
 {
 
 	int nid, fail;
@@ -117,16 +113,11 @@
 	if (!section->page_cgroup) {
 		nid = page_to_nid(pfn_to_page(pfn));
 		table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
-		if (slab_is_available()) {
-			base = kmalloc_node(table_size,
-					GFP_KERNEL | __GFP_NOWARN, nid);
-			if (!base)
-				base = vmalloc_node(table_size, nid);
-		} else {
-			base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
-				table_size,
-				PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
-		}
+		VM_BUG_ON(!slab_is_available());
+		base = kmalloc_node(table_size,
+				GFP_KERNEL | __GFP_NOWARN, nid);
+		if (!base)
+			base = vmalloc_node(table_size, nid);
 	} else {
 		/*
  		 * We don't have to allocate page_cgroup again, but
diff --git a/mm/slab.c b/mm/slab.c
index f46b65d..18e3164 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -304,6 +304,12 @@
 };
 
 /*
+ * The slab allocator is initialized with interrupts disabled. Therefore, make
+ * sure early boot allocations don't accidentally enable interrupts.
+ */
+static gfp_t slab_gfp_mask __read_mostly = SLAB_GFP_BOOT_MASK;
+
+/*
  * Need this for bootstrapping a per node allocator.
  */
 #define NUM_INIT_LISTS (3 * MAX_NUMNODES)
@@ -753,6 +759,7 @@
 	NONE,
 	PARTIAL_AC,
 	PARTIAL_L3,
+	EARLY,
 	FULL
 } g_cpucache_up;
 
@@ -761,7 +768,7 @@
  */
 int slab_is_available(void)
 {
-	return g_cpucache_up == FULL;
+	return g_cpucache_up >= EARLY;
 }
 
 static DEFINE_PER_CPU(struct delayed_work, reap_work);
@@ -1625,19 +1632,27 @@
 		}
 	}
 
-	/* 6) resize the head arrays to their final sizes */
-	{
-		struct kmem_cache *cachep;
-		mutex_lock(&cache_chain_mutex);
-		list_for_each_entry(cachep, &cache_chain, next)
-			if (enable_cpucache(cachep, GFP_NOWAIT))
-				BUG();
-		mutex_unlock(&cache_chain_mutex);
-	}
+	g_cpucache_up = EARLY;
 
 	/* Annotate slab for lockdep -- annotate the malloc caches */
 	init_lock_keys();
+}
 
+void __init kmem_cache_init_late(void)
+{
+	struct kmem_cache *cachep;
+
+	/*
+	 * Interrupts are enabled now so all GFP allocations are safe.
+	 */
+	slab_gfp_mask = __GFP_BITS_MASK;
+
+	/* 6) resize the head arrays to their final sizes */
+	mutex_lock(&cache_chain_mutex);
+	list_for_each_entry(cachep, &cache_chain, next)
+		if (enable_cpucache(cachep, GFP_NOWAIT))
+			BUG();
+	mutex_unlock(&cache_chain_mutex);
 
 	/* Done! */
 	g_cpucache_up = FULL;
@@ -2102,7 +2117,7 @@
 			for_each_online_node(node) {
 				cachep->nodelists[node] =
 				    kmalloc_node(sizeof(struct kmem_list3),
-						GFP_KERNEL, node);
+						gfp, node);
 				BUG_ON(!cachep->nodelists[node]);
 				kmem_list3_init(cachep->nodelists[node]);
 			}
@@ -3354,6 +3369,8 @@
 	unsigned long save_flags;
 	void *ptr;
 
+	flags &= slab_gfp_mask;
+
 	lockdep_trace_alloc(flags);
 
 	if (slab_should_failslab(cachep, flags))
@@ -3434,6 +3451,8 @@
 	unsigned long save_flags;
 	void *objp;
 
+	flags &= slab_gfp_mask;
+
 	lockdep_trace_alloc(flags);
 
 	if (slab_should_failslab(cachep, flags))
diff --git a/mm/slub.c b/mm/slub.c
index 3964d3c..30354bf 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -178,6 +178,12 @@
 	SYSFS		/* Sysfs up */
 } slab_state = DOWN;
 
+/*
+ * The slab allocator is initialized with interrupts disabled. Therefore, make
+ * sure early boot allocations don't accidentally enable interrupts.
+ */
+static gfp_t slab_gfp_mask __read_mostly = SLAB_GFP_BOOT_MASK;
+
 /* A list of all slab caches on the system */
 static DECLARE_RWSEM(slub_lock);
 static LIST_HEAD(slab_caches);
@@ -1595,6 +1601,8 @@
 	unsigned long flags;
 	unsigned int objsize;
 
+	gfpflags &= slab_gfp_mask;
+
 	lockdep_trace_alloc(gfpflags);
 	might_sleep_if(gfpflags & __GFP_WAIT);
 
@@ -3104,6 +3112,14 @@
 		nr_cpu_ids, nr_node_ids);
 }
 
+void __init kmem_cache_init_late(void)
+{
+	/*
+	 * Interrupts are enabled now so all GFP allocations are safe.
+	 */
+	slab_gfp_mask = __GFP_BITS_MASK;
+}
+
 /*
  * Find a mergeable slab cache
  */
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index bb8579a..a49484e 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -246,7 +246,7 @@
 	chan->vdev = vdev;
 
 	/* We expect one virtqueue, for requests. */
-	chan->vq = vdev->config->find_vq(vdev, 0, req_done);
+	chan->vq = virtio_find_single_vq(vdev, req_done, "requests");
 	if (IS_ERR(chan->vq)) {
 		err = PTR_ERR(chan->vq);
 		goto out_free_vq;
@@ -261,7 +261,7 @@
 	return 0;
 
 out_free_vq:
-	vdev->config->del_vq(chan->vq);
+	vdev->config->del_vqs(vdev);
 fail:
 	mutex_lock(&virtio_9p_lock);
 	chan_index--;
@@ -332,7 +332,7 @@
 	BUG_ON(chan->inuse);
 
 	if (chan->initialized) {
-		vdev->config->del_vq(chan->vq);
+		vdev->config->del_vqs(vdev);
 		chan->initialized = false;
 	}
 }
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index a334428..40e0045 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -641,7 +641,7 @@
 	id->vendor = TO_NATIVE(id->vendor);
 
 	strcpy(alias, "virtio:");
-	ADD(alias, "d", 1, id->device);
+	ADD(alias, "d", id->device != VIRTIO_DEV_ANY_ID, id->device);
 	ADD(alias, "v", id->vendor != VIRTIO_DEV_ANY_ID, id->vendor);
 
 	add_wildcard(alias);
diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c
index fbf5c93..586965f 100644
--- a/sound/aoa/fabrics/layout.c
+++ b/sound/aoa/fabrics/layout.c
@@ -1037,7 +1037,7 @@
 	}
 	ldev->selfptr_headphone.ptr = ldev;
 	ldev->selfptr_lineout.ptr = ldev;
-	sdev->ofdev.dev.driver_data = ldev;
+	dev_set_drvdata(&sdev->ofdev.dev, ldev);
 	list_add(&ldev->list, &layouts_list);
 	layouts_list_items++;
 
@@ -1081,7 +1081,7 @@
 
 static int aoa_fabric_layout_remove(struct soundbus_dev *sdev)
 {
-	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+	struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev);
 	int i;
 
 	for (i=0; i<MAX_CODECS_PER_BUS; i++) {
@@ -1114,7 +1114,7 @@
 #ifdef CONFIG_PM
 static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t state)
 {
-	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+	struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev);
 
 	if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
 		ldev->gpio.methods->all_amps_off(&ldev->gpio);
@@ -1124,7 +1124,7 @@
 
 static int aoa_fabric_layout_resume(struct soundbus_dev *sdev)
 {
-	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+	struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev);
 
 	if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
 		ldev->gpio.methods->all_amps_restore(&ldev->gpio);
diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c
index 418c84c..4e3b819 100644
--- a/sound/aoa/soundbus/i2sbus/core.c
+++ b/sound/aoa/soundbus/i2sbus/core.c
@@ -358,14 +358,14 @@
 		return -ENODEV;
 	}
 
-	dev->ofdev.dev.driver_data = control;
+	dev_set_drvdata(&dev->ofdev.dev, control);
 
 	return 0;
 }
 
 static int i2sbus_remove(struct macio_dev* dev)
 {
-	struct i2sbus_control *control = dev->ofdev.dev.driver_data;
+	struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev);
 	struct i2sbus_dev *i2sdev, *tmp;
 
 	list_for_each_entry_safe(i2sdev, tmp, &control->list, item)
@@ -377,7 +377,7 @@
 #ifdef CONFIG_PM
 static int i2sbus_suspend(struct macio_dev* dev, pm_message_t state)
 {
-	struct i2sbus_control *control = dev->ofdev.dev.driver_data;
+	struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev);
 	struct codec_info_item *cii;
 	struct i2sbus_dev* i2sdev;
 	int err, ret = 0;
@@ -407,7 +407,7 @@
 
 static int i2sbus_resume(struct macio_dev* dev)
 {
-	struct i2sbus_control *control = dev->ofdev.dev.driver_data;
+	struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev);
 	struct codec_info_item *cii;
 	struct i2sbus_dev* i2sdev;
 	int err, ret = 0;
diff --git a/sound/core/Kconfig b/sound/core/Kconfig
index 7bbdda0..6061fb5 100644
--- a/sound/core/Kconfig
+++ b/sound/core/Kconfig
@@ -205,3 +205,5 @@
 
 config SND_VMASTER
 	bool
+
+source "sound/core/seq/Kconfig"
diff --git a/sound/core/init.c b/sound/core/init.c
index fd56afe..d5d40d7 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -152,15 +152,8 @@
 	card = kzalloc(sizeof(*card) + extra_size, GFP_KERNEL);
 	if (!card)
 		return -ENOMEM;
-	if (xid) {
-		if (!snd_info_check_reserved_words(xid)) {
-			snd_printk(KERN_ERR
-				   "given id string '%s' is reserved.\n", xid);
-			err = -EBUSY;
-			goto __error;
-		}
+	if (xid)
 		strlcpy(card->id, xid, sizeof(card->id));
-	}
 	err = 0;
 	mutex_lock(&snd_card_mutex);
 	if (idx < 0) {
@@ -483,22 +476,28 @@
 
 EXPORT_SYMBOL(snd_card_free);
 
-static void choose_default_id(struct snd_card *card)
+static void snd_card_set_id_no_lock(struct snd_card *card, const char *nid)
 {
 	int i, len, idx_flag = 0, loops = SNDRV_CARDS;
-	char *id, *spos;
+	const char *spos, *src;
+	char *id;
 	
-	id = spos = card->shortname;	
-	while (*id != '\0') {
-		if (*id == ' ')
-			spos = id + 1;
-		id++;
+	if (nid == NULL) {
+		id = card->shortname;
+		spos = src = id;
+		while (*id != '\0') {
+			if (*id == ' ')
+				spos = id + 1;
+			id++;
+		}
+	} else {
+		spos = src = nid;
 	}
 	id = card->id;
 	while (*spos != '\0' && !isalnum(*spos))
 		spos++;
 	if (isdigit(*spos))
-		*id++ = isalpha(card->shortname[0]) ? card->shortname[0] : 'D';
+		*id++ = isalpha(src[0]) ? src[0] : 'D';
 	while (*spos != '\0' && (size_t)(id - card->id) < sizeof(card->id) - 1) {
 		if (isalnum(*spos))
 			*id++ = *spos;
@@ -513,7 +512,7 @@
 
 	while (1) {
 	      	if (loops-- == 0) {
-      			snd_printk(KERN_ERR "unable to choose default card id (%s)\n", id);
+			snd_printk(KERN_ERR "unable to set card id (%s)\n", id);
       			strcpy(card->id, card->proc_root->name);
       			return;
       		}
@@ -539,14 +538,33 @@
 			spos = id + len - 2;
 			if ((size_t)len <= sizeof(card->id) - 2)
 				spos++;
-			*spos++ = '_';
-			*spos++ = '1';
-			*spos++ = '\0';
+			*(char *)spos++ = '_';
+			*(char *)spos++ = '1';
+			*(char *)spos++ = '\0';
 			idx_flag++;
 		}
 	}
 }
 
+/**
+ *  snd_card_set_id - set card identification name
+ *  @card: soundcard structure
+ *  @nid: new identification string
+ *
+ *  This function sets the card identification and checks for name
+ *  collisions.
+ */
+void snd_card_set_id(struct snd_card *card, const char *nid)
+{
+	/* check if user specified own card->id */
+	if (card->id[0] != '\0')
+		return;
+	mutex_lock(&snd_card_mutex);
+	snd_card_set_id_no_lock(card, nid);
+	mutex_unlock(&snd_card_mutex);
+}
+EXPORT_SYMBOL(snd_card_set_id);
+
 #ifndef CONFIG_SYSFS_DEPRECATED
 static ssize_t
 card_id_show_attr(struct device *dev,
@@ -640,8 +658,7 @@
 		mutex_unlock(&snd_card_mutex);
 		return 0;
 	}
-	if (card->id[0] == '\0')
-		choose_default_id(card);
+	snd_card_set_id_no_lock(card, card->id[0] == '\0' ? NULL : card->id);
 	snd_cards[card->number] = card;
 	mutex_unlock(&snd_card_mutex);
 	init_info_for_card(card);
diff --git a/sound/core/jack.c b/sound/core/jack.c
index d54d1a0..f705eec 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -63,7 +63,7 @@
 
 	/* Default to the sound card device. */
 	if (!jack->input_dev->dev.parent)
-		jack->input_dev->dev.parent = card->dev;
+		jack->input_dev->dev.parent = snd_card_get_device_link(card);
 
 	err = input_register_device(jack->input_dev);
 	if (err == 0)
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index dda000b..dbe406b 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -31,6 +31,7 @@
 #include <linux/time.h>
 #include <linux/vmalloc.h>
 #include <linux/moduleparam.h>
+#include <linux/math64.h>
 #include <linux/string.h>
 #include <sound/core.h>
 #include <sound/minors.h>
@@ -617,9 +618,7 @@
 #else
 	{
 		u64 bsize = (u64)runtime->oss.buffer_bytes * (u64)bytes;
-		u32 rem;
-		div64_32(&bsize, buffer_size, &rem);
-		return (long)bsize;
+		return div_u64(bsize, buffer_size);
 	}
 #endif
 }
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index d659995..333e4dd 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -22,6 +22,7 @@
 
 #include <linux/slab.h>
 #include <linux/time.h>
+#include <linux/math64.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/info.h>
@@ -126,24 +127,37 @@
 }
 
 #ifdef CONFIG_SND_PCM_XRUN_DEBUG
-#define xrun_debug(substream)	((substream)->pstr->xrun_debug)
+#define xrun_debug(substream, mask)	((substream)->pstr->xrun_debug & (mask))
 #else
-#define xrun_debug(substream)	0
+#define xrun_debug(substream, mask)	0
 #endif
 
-#define dump_stack_on_xrun(substream) do {	\
-		if (xrun_debug(substream) > 1)	\
-			dump_stack();		\
+#define dump_stack_on_xrun(substream) do {		\
+		if (xrun_debug(substream, 2))		\
+			dump_stack();			\
 	} while (0)
 
+static void pcm_debug_name(struct snd_pcm_substream *substream,
+			   char *name, size_t len)
+{
+	snprintf(name, len, "pcmC%dD%d%c:%d",
+		 substream->pcm->card->number,
+		 substream->pcm->device,
+		 substream->stream ? 'c' : 'p',
+		 substream->number);
+}
+
 static void xrun(struct snd_pcm_substream *substream)
 {
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
+		snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
 	snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
-	if (xrun_debug(substream)) {
-		snd_printd(KERN_DEBUG "XRUN: pcmC%dD%d%c\n",
-			   substream->pcm->card->number,
-			   substream->pcm->device,
-			   substream->stream ? 'c' : 'p');
+	if (xrun_debug(substream, 1)) {
+		char name[16];
+		pcm_debug_name(substream, name, sizeof(name));
+		snd_printd(KERN_DEBUG "XRUN: %s\n", name);
 		dump_stack_on_xrun(substream);
 	}
 }
@@ -154,16 +168,16 @@
 {
 	snd_pcm_uframes_t pos;
 
-	if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
-		snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
 	pos = substream->ops->pointer(substream);
 	if (pos == SNDRV_PCM_POS_XRUN)
 		return pos; /* XRUN */
 	if (pos >= runtime->buffer_size) {
 		if (printk_ratelimit()) {
-			snd_printd(KERN_ERR  "BUG: stream = %i, pos = 0x%lx, "
+			char name[16];
+			pcm_debug_name(substream, name, sizeof(name));
+			snd_printd(KERN_ERR  "BUG: %s, pos = 0x%lx, "
 				   "buffer size = 0x%lx, period size = 0x%lx\n",
-				   substream->stream, pos, runtime->buffer_size,
+				   name, pos, runtime->buffer_size,
 				   runtime->period_size);
 		}
 		pos = 0;
@@ -197,7 +211,7 @@
 
 #define hw_ptr_error(substream, fmt, args...)				\
 	do {								\
-		if (xrun_debug(substream)) {				\
+		if (xrun_debug(substream, 1)) {				\
 			if (printk_ratelimit()) {			\
 				snd_printd("PCM: " fmt, ##args);	\
 			}						\
@@ -251,7 +265,7 @@
 	}
 
 	/* Do jiffies check only in xrun_debug mode */
-	if (!xrun_debug(substream))
+	if (!xrun_debug(substream, 4))
 		goto no_jiffies_check;
 
 	/* Skip the jiffies check for hardwares with BATCH flag.
@@ -261,6 +275,9 @@
 	if (runtime->hw.info & SNDRV_PCM_INFO_BATCH)
 		goto no_jiffies_check;
 	hdelta = new_hw_ptr - old_hw_ptr;
+	if (hdelta < runtime->delay)
+		goto no_jiffies_check;
+	hdelta -= runtime->delay;
 	jdelta = jiffies - runtime->hw_ptr_jiffies;
 	if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) {
 		delta = jdelta /
@@ -294,14 +311,20 @@
 		hw_ptr_interrupt =
 			new_hw_ptr - new_hw_ptr % runtime->period_size;
 	}
+	runtime->hw_ptr_interrupt = hw_ptr_interrupt;
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
 	    runtime->silence_size > 0)
 		snd_pcm_playback_silence(substream, new_hw_ptr);
 
+	if (runtime->status->hw_ptr == new_hw_ptr)
+		return 0;
+
 	runtime->hw_ptr_base = hw_base;
 	runtime->status->hw_ptr = new_hw_ptr;
 	runtime->hw_ptr_jiffies = jiffies;
-	runtime->hw_ptr_interrupt = hw_ptr_interrupt;
+	if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
+		snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
 
 	return snd_pcm_update_hw_ptr_post(substream, runtime);
 }
@@ -342,8 +365,12 @@
 		new_hw_ptr = hw_base + pos;
 	}
 	/* Do jiffies check only in xrun_debug mode */
-	if (xrun_debug(substream) &&
-	    ((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
+	if (!xrun_debug(substream, 4))
+		goto no_jiffies_check;
+	if (delta < runtime->delay)
+		goto no_jiffies_check;
+	delta -= runtime->delay;
+	if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
 		hw_ptr_error(substream,
 			     "hw_ptr skipping! "
 			     "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n",
@@ -352,13 +379,19 @@
 			     ((delta * HZ) / runtime->rate));
 		return 0;
 	}
+ no_jiffies_check:
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
 	    runtime->silence_size > 0)
 		snd_pcm_playback_silence(substream, new_hw_ptr);
 
+	if (runtime->status->hw_ptr == new_hw_ptr)
+		return 0;
+
 	runtime->hw_ptr_base = hw_base;
 	runtime->status->hw_ptr = new_hw_ptr;
 	runtime->hw_ptr_jiffies = jiffies;
+	if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
+		snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
 
 	return snd_pcm_update_hw_ptr_post(substream, runtime);
 }
@@ -452,7 +485,7 @@
 		*r = 0;
 		return UINT_MAX;
 	}
-	div64_32(&n, c, r);
+	n = div_u64_rem(n, c, r);
 	if (n >= UINT_MAX) {
 		*r = 0;
 		return UINT_MAX;
@@ -1524,6 +1557,23 @@
 	return 0;
 }
 
+static int snd_pcm_lib_ioctl_fifo_size(struct snd_pcm_substream *substream,
+				       void *arg)
+{
+	struct snd_pcm_hw_params *params = arg;
+	snd_pcm_format_t format;
+	int channels, width;
+
+	params->fifo_size = substream->runtime->hw.fifo_size;
+	if (!(substream->runtime->hw.info & SNDRV_PCM_INFO_FIFO_IN_FRAMES)) {
+		format = params_format(params);
+		channels = params_channels(params);
+		width = snd_pcm_format_physical_width(format);
+		params->fifo_size /= width * channels;
+	}
+	return 0;
+}
+
 /**
  * snd_pcm_lib_ioctl - a generic PCM ioctl callback
  * @substream: the pcm substream instance
@@ -1545,6 +1595,8 @@
 		return snd_pcm_lib_ioctl_reset(substream, arg);
 	case SNDRV_PCM_IOCTL1_CHANNEL_INFO:
 		return snd_pcm_lib_ioctl_channel_info(substream, arg);
+	case SNDRV_PCM_IOCTL1_FIFO_SIZE:
+		return snd_pcm_lib_ioctl_fifo_size(substream, arg);
 	}
 	return -ENXIO;
 }
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index b5da656..84da3ba 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -312,9 +312,18 @@
 
 	hw = &substream->runtime->hw;
 	if (!params->info)
-		params->info = hw->info;
-	if (!params->fifo_size)
-		params->fifo_size = hw->fifo_size;
+		params->info = hw->info & ~SNDRV_PCM_INFO_FIFO_IN_FRAMES;
+	if (!params->fifo_size) {
+		if (snd_mask_min(&params->masks[SNDRV_PCM_HW_PARAM_FORMAT]) ==
+		    snd_mask_max(&params->masks[SNDRV_PCM_HW_PARAM_FORMAT]) &&
+                    snd_mask_min(&params->masks[SNDRV_PCM_HW_PARAM_CHANNELS]) ==
+                    snd_mask_max(&params->masks[SNDRV_PCM_HW_PARAM_CHANNELS])) {
+			changed = substream->ops->ioctl(substream,
+					SNDRV_PCM_IOCTL1_FIFO_SIZE, params);
+			if (params < 0)
+				return changed;
+		}
+	}
 	params->rmask = 0;
 	return 0;
 }
@@ -587,14 +596,15 @@
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		status->avail = snd_pcm_playback_avail(runtime);
 		if (runtime->status->state == SNDRV_PCM_STATE_RUNNING ||
-		    runtime->status->state == SNDRV_PCM_STATE_DRAINING)
+		    runtime->status->state == SNDRV_PCM_STATE_DRAINING) {
 			status->delay = runtime->buffer_size - status->avail;
-		else
+			status->delay += runtime->delay;
+		} else
 			status->delay = 0;
 	} else {
 		status->avail = snd_pcm_capture_avail(runtime);
 		if (runtime->status->state == SNDRV_PCM_STATE_RUNNING)
-			status->delay = status->avail;
+			status->delay = status->avail + runtime->delay;
 		else
 			status->delay = 0;
 	}
@@ -2410,6 +2420,7 @@
 			n = snd_pcm_playback_hw_avail(runtime);
 		else
 			n = snd_pcm_capture_avail(runtime);
+		n += runtime->delay;
 		break;
 	case SNDRV_PCM_STATE_XRUN:
 		err = -EPIPE;
diff --git a/sound/core/seq/Kconfig b/sound/core/seq/Kconfig
new file mode 100644
index 0000000..b851fd8
--- /dev/null
+++ b/sound/core/seq/Kconfig
@@ -0,0 +1,16 @@
+# define SND_XXX_SEQ to min(SND_SEQUENCER,SND_XXX)
+
+config SND_RAWMIDI_SEQ
+	def_tristate SND_SEQUENCER && SND_RAWMIDI
+
+config SND_OPL3_LIB_SEQ
+	def_tristate SND_SEQUENCER && SND_OPL3_LIB
+
+config SND_OPL4_LIB_SEQ
+	def_tristate SND_SEQUENCER && SND_OPL4_LIB
+
+config SND_SBAWE_SEQ
+	def_tristate SND_SEQUENCER && SND_SBAWE
+
+config SND_EMU10K1_SEQ
+	def_tristate SND_SEQUENCER && SND_EMU10K1
diff --git a/sound/core/seq/Makefile b/sound/core/seq/Makefile
index 0695937..1bcb360 100644
--- a/sound/core/seq/Makefile
+++ b/sound/core/seq/Makefile
@@ -17,14 +17,6 @@
 snd-seq-dummy-objs := seq_dummy.o
 snd-seq-virmidi-objs := seq_virmidi.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 obj-$(CONFIG_SND_SEQUENCER) += snd-seq.o snd-seq-device.o
 ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
 obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o
@@ -33,8 +25,8 @@
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_VIRMIDI) += snd-seq-virmidi.o snd-seq-midi-event.o
-obj-$(call sequencer,$(CONFIG_SND_RAWMIDI)) += snd-seq-midi.o snd-seq-midi-event.o
-obj-$(call sequencer,$(CONFIG_SND_OPL3_LIB)) += snd-seq-midi-event.o snd-seq-midi-emul.o
-obj-$(call sequencer,$(CONFIG_SND_OPL4_LIB)) += snd-seq-midi-event.o snd-seq-midi-emul.o
-obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-seq-midi-emul.o snd-seq-virmidi.o
-obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-seq-midi-emul.o snd-seq-virmidi.o
+obj-$(CONFIG_SND_RAWMIDI_SEQ) += snd-seq-midi.o snd-seq-midi-event.o
+obj-$(CONFIG_SND_OPL3_LIB_SEQ) += snd-seq-midi-event.o snd-seq-midi-emul.o
+obj-$(CONFIG_SND_OPL4_LIB_SEQ) += snd-seq-midi-event.o snd-seq-midi-emul.o
+obj-$(CONFIG_SND_SBAWE_SEQ) += snd-seq-midi-emul.o snd-seq-virmidi.o
+obj-$(CONFIG_SND_EMU10K1_SEQ) += snd-seq-midi-emul.o snd-seq-virmidi.o
diff --git a/sound/drivers/opl3/Makefile b/sound/drivers/opl3/Makefile
index 19767a6..7f2c2a1 100644
--- a/sound/drivers/opl3/Makefile
+++ b/sound/drivers/opl3/Makefile
@@ -7,14 +7,6 @@
 snd-opl3-synth-y := opl3_seq.o opl3_midi.o opl3_drums.o
 snd-opl3-synth-$(CONFIG_SND_SEQUENCER_OSS) += opl3_oss.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 obj-$(CONFIG_SND_OPL3_LIB) += snd-opl3-lib.o
 obj-$(CONFIG_SND_OPL4_LIB) += snd-opl3-lib.o
-obj-$(call sequencer,$(CONFIG_SND_OPL3_LIB)) += snd-opl3-synth.o
+obj-$(CONFIG_SND_OPL3_LIB_SEQ) += snd-opl3-synth.o
diff --git a/sound/drivers/opl4/Makefile b/sound/drivers/opl4/Makefile
index d178b39..b94009b 100644
--- a/sound/drivers/opl4/Makefile
+++ b/sound/drivers/opl4/Makefile
@@ -6,13 +6,5 @@
 snd-opl4-lib-objs := opl4_lib.o opl4_mixer.o opl4_proc.o
 snd-opl4-synth-objs := opl4_seq.o opl4_synth.o yrw801.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 obj-$(CONFIG_SND_OPL4_LIB) += snd-opl4-lib.o
-obj-$(call sequencer,$(CONFIG_SND_OPL4_LIB)) += snd-opl4-synth.o
+obj-$(CONFIG_SND_OPL4_LIB_SEQ) += snd-opl4-synth.o
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index c6942a4..51a7e37 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -177,15 +177,18 @@
 	  will be called snd-es18xx.
 
 config SND_SC6000
-	tristate "Gallant SC-6000, Audio Excel DSP 16"
+	tristate "Gallant SC-6000/6600/7000 and Audio Excel DSP 16"
 	depends on HAS_IOPORT
 	select SND_WSS_LIB
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	help
-	  Say Y here to include support for Gallant SC-6000 card and clones:
+	  Say Y here to include support for Gallant SC-6000, SC-6600, SC-7000
+	  cards and clones:
 	  Audio Excel DSP 16 and Zoltrix AV302.
 
+	  These cards are based on CompuMedia ASC-9308 or ASC-9408 chips.
+
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-sc6000.
 
diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c
index 442b081..07df201 100644
--- a/sound/isa/es1688/es1688.c
+++ b/sound/isa/es1688/es1688.c
@@ -193,7 +193,7 @@
 static struct isa_driver snd_es1688_driver = {
 	.match		= snd_es1688_match,
 	.probe		= snd_es1688_probe,
-	.remove		= snd_es1688_remove,
+	.remove		= __devexit_p(snd_es1688_remove),
 #if 0	/* FIXME */
 	.suspend	= snd_es1688_suspend,
 	.resume		= snd_es1688_resume,
diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c
index 180a8de..65e4b18 100644
--- a/sound/isa/gus/gusextreme.c
+++ b/sound/isa/gus/gusextreme.c
@@ -348,7 +348,7 @@
 static struct isa_driver snd_gusextreme_driver = {
 	.match		= snd_gusextreme_match,
 	.probe		= snd_gusextreme_probe,
-	.remove		= snd_gusextreme_remove,
+	.remove		= __devexit_p(snd_gusextreme_remove),
 #if 0	/* FIXME */
 	.suspend	= snd_gusextreme_suspend,
 	.resume		= snd_gusextreme_resume,
diff --git a/sound/isa/sb/Makefile b/sound/isa/sb/Makefile
index 1098a56..faeffceb 100644
--- a/sound/isa/sb/Makefile
+++ b/sound/isa/sb/Makefile
@@ -13,14 +13,6 @@
 snd-emu8000-synth-objs := emu8000_synth.o emu8000_callback.o emu8000_patch.o emu8000_pcm.o
 snd-es968-objs := es968.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_SB_COMMON) += snd-sb-common.o
 obj-$(CONFIG_SND_SB16_DSP) += snd-sb16-dsp.o
@@ -33,4 +25,4 @@
   obj-$(CONFIG_SND_SB16) += snd-sb16-csp.o
   obj-$(CONFIG_SND_SBAWE) += snd-sb16-csp.o
 endif
-obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-emu8000-synth.o
+obj-$(CONFIG_SND_SBAWE_SEQ) += snd-emu8000-synth.o
diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c
index 7820106..9a8bbf6 100644
--- a/sound/isa/sc6000.c
+++ b/sound/isa/sc6000.c
@@ -2,6 +2,8 @@
  *  Driver for Gallant SC-6000 soundcard. This card is also known as
  *  Audio Excel DSP 16 or Zoltrix AV302.
  *  These cards use CompuMedia ASC-9308 chip + AD1848 codec.
+ *  SC-6600 and SC-7000 cards are also supported. They are based on
+ *  CompuMedia ASC-9408 chip and CS4231 codec.
  *
  *  Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
  *
@@ -54,6 +56,7 @@
 						/* 0x300, 0x310, 0x320, 0x330 */
 static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;	/* 5, 7, 9, 10, 0 */
 static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;	/* 0, 1, 3 */
+static bool joystick[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = false };
 
 module_param_array(index, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index value for sc-6000 based soundcard.");
@@ -73,6 +76,8 @@
 MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for sc-6000 driver.");
 module_param_array(dma, int, NULL, 0444);
 MODULE_PARM_DESC(dma, "DMA # for sc-6000 driver.");
+module_param_array(joystick, bool, NULL, 0444);
+MODULE_PARM_DESC(joystick, "Enable gameport.");
 
 /*
  * Commands of SC6000's DSP (SBPRO+special).
@@ -191,7 +196,7 @@
 	return val;
 }
 
-static __devinit int sc6000_wait_data(char __iomem *vport)
+static int sc6000_wait_data(char __iomem *vport)
 {
 	int loop = 1000;
 	unsigned char val = 0;
@@ -206,7 +211,7 @@
 	return -EAGAIN;
 }
 
-static __devinit int sc6000_read(char __iomem *vport)
+static int sc6000_read(char __iomem *vport)
 {
 	if (sc6000_wait_data(vport))
 		return -EBUSY;
@@ -215,7 +220,7 @@
 
 }
 
-static __devinit int sc6000_write(char __iomem *vport, int cmd)
+static int sc6000_write(char __iomem *vport, int cmd)
 {
 	unsigned char val;
 	int loop = 500000;
@@ -276,8 +281,33 @@
 }
 
 /* detection and initialization */
-static int __devinit sc6000_cfg_write(char __iomem *vport,
-				      unsigned char softcfg)
+static int __devinit sc6000_hw_cfg_write(char __iomem *vport, const int *cfg)
+{
+	if (sc6000_write(vport, COMMAND_6C) < 0) {
+		snd_printk(KERN_WARNING "CMD 0x%x: failed!\n", COMMAND_6C);
+		return -EIO;
+	}
+	if (sc6000_write(vport, COMMAND_5C) < 0) {
+		snd_printk(KERN_ERR "CMD 0x%x: failed!\n", COMMAND_5C);
+		return -EIO;
+	}
+	if (sc6000_write(vport, cfg[0]) < 0) {
+		snd_printk(KERN_ERR "DATA 0x%x: failed!\n", cfg[0]);
+		return -EIO;
+	}
+	if (sc6000_write(vport, cfg[1]) < 0) {
+		snd_printk(KERN_ERR "DATA 0x%x: failed!\n", cfg[1]);
+		return -EIO;
+	}
+	if (sc6000_write(vport, COMMAND_C5) < 0) {
+		snd_printk(KERN_ERR "CMD 0x%x: failed!\n", COMMAND_C5);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int sc6000_cfg_write(char __iomem *vport, unsigned char softcfg)
 {
 
 	if (sc6000_write(vport, WRITE_MDIRQ_CFG)) {
@@ -291,7 +321,7 @@
 	return 0;
 }
 
-static int __devinit sc6000_setup_board(char __iomem *vport, int config)
+static int sc6000_setup_board(char __iomem *vport, int config)
 {
 	int loop = 10;
 
@@ -334,16 +364,39 @@
 	return 0;
 }
 
-static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma,
-					char __iomem *vmss_port, int mpu_irq)
+static void __devinit sc6000_hw_cfg_encode(char __iomem *vport, int *cfg,
+					   long xport, long xmpu,
+					   long xmss_port, int joystick)
+{
+	cfg[0] = 0;
+	cfg[1] = 0;
+	if (xport == 0x240)
+		cfg[0] |= 1;
+	if (xmpu != SNDRV_AUTO_PORT) {
+		cfg[0] |= (xmpu & 0x30) >> 2;
+		cfg[1] |= 0x20;
+	}
+	if (xmss_port == 0xe80)
+		cfg[0] |= 0x10;
+	cfg[0] |= 0x40;		/* always set */
+	if (!joystick)
+		cfg[0] |= 0x02;
+	cfg[1] |= 0x80;		/* enable WSS system */
+	cfg[1] &= ~0x40;	/* disable IDE */
+	snd_printd("hw cfg %x, %x\n", cfg[0], cfg[1]);
+}
+
+static int __devinit sc6000_init_board(char __iomem *vport,
+					char __iomem *vmss_port, int dev)
 {
 	char answer[15];
 	char version[2];
-	int mss_config = sc6000_irq_to_softcfg(irq) |
-			 sc6000_dma_to_softcfg(dma);
+	int mss_config = sc6000_irq_to_softcfg(irq[dev]) |
+			 sc6000_dma_to_softcfg(dma[dev]);
 	int config = mss_config |
-		     sc6000_mpu_irq_to_softcfg(mpu_irq);
+		     sc6000_mpu_irq_to_softcfg(mpu_irq[dev]);
 	int err;
+	int old = 0;
 
 	err = sc6000_dsp_reset(vport);
 	if (err < 0) {
@@ -360,7 +413,6 @@
 	/*
 	 * My SC-6000 card return "SC-6000" in DSPCopyright, so
 	 * if we have something different, we have to be warned.
-	 * Mine returns "SC-6000A " - KH
 	 */
 	if (strncmp("SC-6000", answer, 7))
 		snd_printk(KERN_WARNING "Warning: non SC-6000 audio card!\n");
@@ -372,13 +424,32 @@
 	printk(KERN_INFO PFX "Detected model: %s, DSP version %d.%d\n",
 		answer, version[0], version[1]);
 
-	/*
-	 * 0x0A == (IRQ 7, DMA 1, MIRQ 0)
-	 */
-	err = sc6000_cfg_write(vport, 0x0a);
+	/* set configuration */
+	sc6000_write(vport, COMMAND_5C);
+	if (sc6000_read(vport) < 0)
+		old = 1;
+
+	if (!old) {
+		int cfg[2];
+		sc6000_hw_cfg_encode(vport, &cfg[0], port[dev], mpu_port[dev],
+				     mss_port[dev], joystick[dev]);
+		if (sc6000_hw_cfg_write(vport, cfg) < 0) {
+			snd_printk(KERN_ERR "sc6000_hw_cfg_write: failed!\n");
+			return -EIO;
+		}
+	}
+	err = sc6000_setup_board(vport, config);
 	if (err < 0) {
-		snd_printk(KERN_ERR "sc6000_cfg_write: failed!\n");
-		return -EFAULT;
+		snd_printk(KERN_ERR "sc6000_setup_board: failed!\n");
+		return -ENODEV;
+	}
+
+	sc6000_dsp_reset(vport);
+
+	if (!old) {
+		sc6000_write(vport, COMMAND_60);
+		sc6000_write(vport, 0x02);
+		sc6000_dsp_reset(vport);
 	}
 
 	err = sc6000_setup_board(vport, config);
@@ -386,10 +457,9 @@
 		snd_printk(KERN_ERR "sc6000_setup_board: failed!\n");
 		return -ENODEV;
 	}
-
 	err = sc6000_init_mss(vport, config, vmss_port, mss_config);
 	if (err < 0) {
-		snd_printk(KERN_ERR "Can not initialize "
+		snd_printk(KERN_ERR "Cannot initialize "
 			   "Microsoft Sound System mode.\n");
 		return -ENODEV;
 	}
@@ -485,14 +555,16 @@
 	struct snd_card *card;
 	struct snd_wss *chip;
 	struct snd_opl3 *opl3;
-	char __iomem *vport;
+	char __iomem **vport;
 	char __iomem *vmss_port;
 
 
-	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+	err = snd_card_create(index[dev], id[dev], THIS_MODULE, sizeof(vport),
+				&card);
 	if (err < 0)
 		return err;
 
+	vport = card->private_data;
 	if (xirq == SNDRV_AUTO_IRQ) {
 		xirq = snd_legacy_find_free_irq(possible_irqs);
 		if (xirq < 0) {
@@ -517,8 +589,8 @@
 		err = -EBUSY;
 		goto err_exit;
 	}
-	vport = devm_ioport_map(devptr, port[dev], 0x10);
-	if (!vport) {
+	*vport = devm_ioport_map(devptr, port[dev], 0x10);
+	if (*vport == NULL) {
 		snd_printk(KERN_ERR PFX
 			   "I/O port cannot be iomaped.\n");
 		err = -EBUSY;
@@ -533,7 +605,7 @@
 		goto err_unmap1;
 	}
 	vmss_port = devm_ioport_map(devptr, mss_port[dev], 4);
-	if (!vport) {
+	if (!vmss_port) {
 		snd_printk(KERN_ERR PFX
 			   "MSS port I/O cannot be iomaped.\n");
 		err = -EBUSY;
@@ -544,7 +616,7 @@
 		   port[dev], xirq, xdma,
 		   mpu_irq[dev] == SNDRV_AUTO_IRQ ? 0 : mpu_irq[dev]);
 
-	err = sc6000_init_board(vport, xirq, xdma, vmss_port, mpu_irq[dev]);
+	err = sc6000_init_board(*vport, vmss_port, dev);
 	if (err < 0)
 		goto err_unmap2;
 
@@ -552,7 +624,6 @@
 			     WSS_HW_DETECT, 0, &chip);
 	if (err < 0)
 		goto err_unmap2;
-	card->private_data = chip;
 
 	err = snd_wss_pcm(chip, 0, NULL);
 	if (err < 0) {
@@ -608,6 +679,7 @@
 	return 0;
 
 err_unmap2:
+	sc6000_setup_board(*vport, 0);
 	release_region(mss_port[dev], 4);
 err_unmap1:
 	release_region(port[dev], 0x10);
@@ -618,11 +690,17 @@
 
 static int __devexit snd_sc6000_remove(struct device *devptr, unsigned int dev)
 {
+	struct snd_card *card = dev_get_drvdata(devptr);
+	char __iomem **vport = card->private_data;
+
+	if (sc6000_setup_board(*vport, 0) < 0)
+		snd_printk(KERN_WARNING "sc6000_setup_board failed on exit!\n");
+
 	release_region(port[dev], 0x10);
 	release_region(mss_port[dev], 4);
 
-	snd_card_free(dev_get_drvdata(devptr));
 	dev_set_drvdata(devptr, NULL);
+	snd_card_free(card);
 	return 0;
 }
 
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
index 66f3b48..e497525 100644
--- a/sound/mips/sgio2audio.c
+++ b/sound/mips/sgio2audio.c
@@ -619,8 +619,7 @@
 /* hw_free callback */
 static int snd_sgio2audio_pcm_hw_free(struct snd_pcm_substream *substream)
 {
-	if (substream->runtime->dma_area)
-		vfree(substream->runtime->dma_area);
+	vfree(substream->runtime->dma_area);
 	substream->runtime->dma_area = NULL;
 	return 0;
 }
diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c
index 6055fd6..e924492 100644
--- a/sound/parisc/harmony.c
+++ b/sound/parisc/harmony.c
@@ -935,7 +935,7 @@
 	h->iobase = ioremap_nocache(padev->hpa.start, HARMONY_SIZE);
 	if (h->iobase == NULL) {
 		printk(KERN_ERR PFX "unable to remap hpa 0x%lx\n",
-		       padev->hpa.start);
+		       (unsigned long)padev->hpa.start);
 		err = -EBUSY;
 		goto free_and_ret;
 	}
@@ -1020,7 +1020,7 @@
 	.name = "harmony",
 	.id_table = snd_harmony_devtable,
 	.probe = snd_harmony_probe,
-	.remove = snd_harmony_remove,
+	.remove = __devexit_p(snd_harmony_remove),
 };
 
 static int __init 
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 93422e3..748f6b7 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -275,6 +275,16 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-cs5535audio.
 
+config SND_CTXFI
+	tristate "Creative Sound Blaster X-Fi"
+	select SND_PCM
+	help
+	  If you want to use soundcards based on Creative Sound Blastr X-Fi
+	  boards with 20k1 or 20k2 chips, say Y here.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-ctxfi.
+
 config SND_DARLA20
 	tristate "(Echoaudio) Darla20"
 	select FW_LOADER
@@ -532,6 +542,9 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-hdsp.
 
+comment "Don't forget to add built-in firmwares for HDSP driver"
+	depends on SND_HDSP=y
+
 config SND_HDSPM
 	tristate "RME Hammerfall DSP MADI"
 	select SND_HWDEP
@@ -622,6 +635,16 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-korg1212.
 
+config SND_LX6464ES
+	tristate "Digigram LX6464ES"
+	select SND_PCM
+	help
+	  Say Y here to include support for Digigram LX6464ES boards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-lx6464es.
+
+
 config SND_MAESTRO3
 	tristate "ESS Allegro/Maestro3"
 	select SND_AC97_CODEC
@@ -764,8 +787,8 @@
 	select SND_OXYGEN_LIB
 	help
 	  Say Y here to include support for sound cards based on the
-	  Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X, and
-	  Essence STX.
+	  Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X,
+	  Essence ST (Deluxe), and Essence STX.
 	  Support for the HDAV1.3 (Deluxe) is very experimental.
 
 	  To compile this driver as a module, choose M here: the module
diff --git a/sound/pci/Makefile b/sound/pci/Makefile
index 65b25d2..ecfc609 100644
--- a/sound/pci/Makefile
+++ b/sound/pci/Makefile
@@ -59,9 +59,11 @@
 	ali5451/ \
 	au88x0/ \
 	aw2/ \
+	ctxfi/ \
 	ca0106/ \
 	cs46xx/ \
 	cs5535audio/ \
+	lx6464es/ \
 	echoaudio/ \
 	emu10k1/ \
 	hda/ \
diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c
index 3906f5a..23f49f3 100644
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -1255,8 +1255,8 @@
 	int temp;
 
 	temp = hwread(vortex->mmio, VORTEX_ADBDMA_STAT + (adbdma << 2));
-	temp = (dma->period_virt * dma->period_bytes) + (temp & POS_MASK);
-	return (temp);
+	temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1));
+	return temp;
 }
 
 static void vortex_adbdma_startfifo(vortex_t * vortex, int adbdma)
@@ -1504,8 +1504,7 @@
 	int temp;
 
 	temp = hwread(vortex->mmio, VORTEX_WTDMA_STAT + (wtdma << 2));
-	//temp = (temp & POS_MASK) + (((temp>>WT_SUBBUF_SHIFT) & WT_SUBBUF_MASK)*(dma->cfg0&POS_MASK));
-	temp = (temp & POS_MASK) + ((dma->period_virt) * (dma->period_bytes));
+	temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1));
 	return temp;
 }
 
@@ -2441,7 +2440,8 @@
 		spin_lock(&vortex->lock);
 		for (i = 0; i < NR_ADB; i++) {
 			if (vortex->dma_adb[i].fifo_status == FIFO_START) {
-				if (vortex_adbdma_bufshift(vortex, i)) ;
+				if (!vortex_adbdma_bufshift(vortex, i))
+					continue;
 				spin_unlock(&vortex->lock);
 				snd_pcm_period_elapsed(vortex->dma_adb[i].
 						       substream);
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index ce3f2e9..24585c6 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -810,6 +810,8 @@
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x107d, 0x6606, GENERIC),
 	/* Voodoo TV 200 */
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x121a, 0x3000, GENERIC),
+	/* Askey Computer Corp. MagicTView'99 */
+	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x144f, 0x3000, GENERIC),
 	/* AVerMedia Studio No. 103, 203, ...? */
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x1461, 0x0003, AVPHONE98),
 	/* Prolink PixelView PV-M4900 */
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index bfac30f..57b992a 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -1319,7 +1319,6 @@
         }
 
 	pcm->info_flags = 0;
-	pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX;
 	strcpy(pcm->name, "CA0106");
 
 	for(substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; 
diff --git a/sound/pci/ca0106/ca0106_mixer.c b/sound/pci/ca0106/ca0106_mixer.c
index c111efe..c8c6f43 100644
--- a/sound/pci/ca0106/ca0106_mixer.c
+++ b/sound/pci/ca0106/ca0106_mixer.c
@@ -739,7 +739,7 @@
 	} while (0)
 
 static __devinitdata
-DECLARE_TLV_DB_SCALE(snd_ca0106_master_db_scale, -6375, 50, 1);
+DECLARE_TLV_DB_SCALE(snd_ca0106_master_db_scale, -6375, 25, 1);
 
 static char *slave_vols[] __devinitdata = {
 	"Analog Front Playback Volume",
@@ -841,6 +841,9 @@
 					      snd_ca0106_master_db_scale);
 	if (!vmaster)
 		return -ENOMEM;
+	err = snd_ctl_add(card, vmaster);
+	if (err < 0)
+		return err;
 	add_slaves(card, vmaster, slave_vols);
 
 	if (emu->details->spi_dac == 1) {
@@ -848,8 +851,13 @@
 						      NULL);
 		if (!vmaster)
 			return -ENOMEM;
+		err = snd_ctl_add(card, vmaster);
+		if (err < 0)
+			return err;
 		add_slaves(card, vmaster, slave_sws);
 	}
+
+	strcpy(card->mixername, "CA0106");
         return 0;
 }
 
diff --git a/sound/pci/ctxfi/Makefile b/sound/pci/ctxfi/Makefile
new file mode 100644
index 0000000..15075f8
--- /dev/null
+++ b/sound/pci/ctxfi/Makefile
@@ -0,0 +1,5 @@
+snd-ctxfi-objs := xfi.o ctatc.o ctvmem.o ctpcm.o ctmixer.o ctresource.o \
+	ctsrc.o ctamixer.o ctdaio.o ctimap.o cthardware.o cttimer.o \
+	cthw20k2.o cthw20k1.o
+
+obj-$(CONFIG_SND_CTXFI) += snd-ctxfi.o
diff --git a/sound/pci/ctxfi/ct20k1reg.h b/sound/pci/ctxfi/ct20k1reg.h
new file mode 100644
index 0000000..f2e34e3
--- /dev/null
+++ b/sound/pci/ctxfi/ct20k1reg.h
@@ -0,0 +1,636 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ */
+
+#ifndef CT20K1REG_H
+#define CT20k1REG_H
+
+/* 20k1 registers */
+#define 	DSPXRAM_START 			0x000000
+#define 	DSPXRAM_END 			0x013FFC
+#define 	DSPAXRAM_START 			0x020000
+#define 	DSPAXRAM_END 			0x023FFC
+#define 	DSPYRAM_START 			0x040000
+#define 	DSPYRAM_END 			0x04FFFC
+#define 	DSPAYRAM_START 			0x020000
+#define 	DSPAYRAM_END 			0x063FFC
+#define 	DSPMICRO_START 			0x080000
+#define 	DSPMICRO_END 			0x0B3FFC
+#define 	DSP0IO_START 			0x100000
+#define 	DSP0IO_END	 		0x101FFC
+#define 	AUDIORINGIPDSP0_START 		0x100000
+#define 	AUDIORINGIPDSP0_END 		0x1003FC
+#define 	AUDIORINGOPDSP0_START 		0x100400
+#define 	AUDIORINGOPDSP0_END 		0x1007FC
+#define 	AUDPARARINGIODSP0_START 	0x100800
+#define 	AUDPARARINGIODSP0_END	 	0x100BFC
+#define 	DSP0LOCALHWREG_START 		0x100C00
+#define 	DSP0LOCALHWREG_END	 	0x100C3C
+#define 	DSP0XYRAMAGINDEX_START 		0x100C40
+#define 	DSP0XYRAMAGINDEX_END	 	0x100C5C
+#define 	DSP0XYRAMAGMDFR_START 		0x100C60
+#define 	DSP0XYRAMAGMDFR_END	 	0x100C7C
+#define 	DSP0INTCONTLVEC_START 		0x100C80
+#define 	DSP0INTCONTLVEC_END	 	0x100CD8
+#define 	INTCONTLGLOBALREG_START 	0x100D1C
+#define 	INTCONTLGLOBALREG_END	 	0x100D3C
+#define		HOSTINTFPORTADDRCONTDSP0	0x100D40
+#define		HOSTINTFPORTDATADSP0		0x100D44
+#define		TIME0PERENBDSP0			0x100D60
+#define		TIME0COUNTERDSP0		0x100D64
+#define		TIME1PERENBDSP0			0x100D68
+#define		TIME1COUNTERDSP0		0x100D6C
+#define		TIME2PERENBDSP0			0x100D70
+#define		TIME2COUNTERDSP0		0x100D74
+#define		TIME3PERENBDSP0			0x100D78
+#define		TIME3COUNTERDSP0		0x100D7C
+#define 	XRAMINDOPERREFNOUP_STARTDSP0 	0x100D80
+#define 	XRAMINDOPERREFNOUP_ENDDSP0	0x100D9C
+#define 	XRAMINDOPERREFUP_STARTDSP0	0x100DA0
+#define 	XRAMINDOPERREFUP_ENDDSP0	0x100DBC
+#define 	YRAMINDOPERREFNOUP_STARTDSP0 	0x100DC0
+#define 	YRAMINDOPERREFNOUP_ENDDSP0 	0x100DDC
+#define 	YRAMINDOPERREFUP_STARTDSP0	0x100DE0
+#define 	YRAMINDOPERREFUP_ENDDSP0 	0x100DFC
+#define 	DSP0CONDCODE 			0x100E00
+#define 	DSP0STACKFLAG 			0x100E04
+#define 	DSP0PROGCOUNTSTACKPTREG 	0x100E08
+#define 	DSP0PROGCOUNTSTACKDATAREG 	0x100E0C
+#define 	DSP0CURLOOPADDRREG 		0x100E10
+#define 	DSP0CURLOOPCOUNT 		0x100E14
+#define 	DSP0TOPLOOPCOUNTSTACK 		0x100E18
+#define 	DSP0TOPLOOPADDRSTACK 		0x100E1C
+#define 	DSP0LOOPSTACKPTR 		0x100E20
+#define 	DSP0STASSTACKDATAREG 		0x100E24
+#define 	DSP0STASSTACKPTR 		0x100E28
+#define 	DSP0PROGCOUNT 			0x100E2C
+#define  	GLOBDSPDEBGREG			0x100E30
+#define  	GLOBDSPBREPTRREG		0x100E30
+#define 	DSP0XYRAMBASE_START 		0x100EA0
+#define 	DSP0XYRAMBASE_END 		0x100EBC
+#define 	DSP0XYRAMLENG_START 		0x100EC0
+#define 	DSP0XYRAMLENG_END 		0x100EDC
+#define		SEMAPHOREREGDSP0		0x100EE0
+#define		DSP0INTCONTMASKREG		0x100EE4
+#define		DSP0INTCONTPENDREG		0x100EE8
+#define		DSP0INTCONTSERVINT		0x100EEC
+#define		DSPINTCONTEXTINTMODREG		0x100EEC
+#define		GPIODSP0			0x100EFC
+#define 	DMADSPBASEADDRREG_STARTDSP0	0x100F00
+#define 	DMADSPBASEADDRREG_ENDDSP0	0x100F1C
+#define 	DMAHOSTBASEADDRREG_STARTDSP0	0x100F20
+#define 	DMAHOSTBASEADDRREG_ENDDSP0	0x100F3C
+#define 	DMADSPCURADDRREG_STARTDSP0	0x100F40
+#define 	DMADSPCURADDRREG_ENDDSP0	0x100F5C
+#define 	DMAHOSTCURADDRREG_STARTDSP0	0x100F60
+#define 	DMAHOSTCURADDRREG_ENDDSP0	0x100F7C
+#define 	DMATANXCOUNTREG_STARTDSP0	0x100F80
+#define 	DMATANXCOUNTREG_ENDDSP0		0x100F9C
+#define 	DMATIMEBUGREG_STARTDSP0		0x100FA0
+#define 	DMATIMEBUGREG_ENDDSP0		0x100FAC
+#define 	DMACNTLMODFREG_STARTDSP0	0x100FA0
+#define 	DMACNTLMODFREG_ENDDSP0		0x100FAC
+
+#define 	DMAGLOBSTATSREGDSP0		0x100FEC
+#define 	DSP0XGPRAM_START 		0x101000
+#define 	DSP0XGPRAM_END 			0x1017FC
+#define 	DSP0YGPRAM_START 		0x101800
+#define 	DSP0YGPRAM_END 			0x101FFC
+
+
+
+
+#define 	AUDIORINGIPDSP1_START 		0x102000
+#define 	AUDIORINGIPDSP1_END	 	0x1023FC
+#define 	AUDIORINGOPDSP1_START 		0x102400
+#define 	AUDIORINGOPDSP1_END	 	0x1027FC
+#define 	AUDPARARINGIODSP1_START 	0x102800
+#define 	AUDPARARINGIODSP1_END	 	0x102BFC
+#define 	DSP1LOCALHWREG_START 		0x102C00
+#define 	DSP1LOCALHWREG_END	 	0x102C3C
+#define 	DSP1XYRAMAGINDEX_START 		0x102C40
+#define 	DSP1XYRAMAGINDEX_END	 	0x102C5C
+#define 	DSP1XYRAMAGMDFR_START 		0x102C60
+#define 	DSP1XYRAMAGMDFR_END	 	0x102C7C
+#define 	DSP1INTCONTLVEC_START 		0x102C80
+#define 	DSP1INTCONTLVEC_END	 	0x102CD8
+#define		HOSTINTFPORTADDRCONTDSP1	0x102D40
+#define		HOSTINTFPORTDATADSP1		0x102D44
+#define		TIME0PERENBDSP1			0x102D60
+#define		TIME0COUNTERDSP1		0x102D64
+#define		TIME1PERENBDSP1			0x102D68
+#define		TIME1COUNTERDSP1		0x102D6C
+#define		TIME2PERENBDSP1			0x102D70
+#define		TIME2COUNTERDSP1		0x102D74
+#define		TIME3PERENBDSP1			0x102D78
+#define		TIME3COUNTERDSP1		0x102D7C
+#define 	XRAMINDOPERREFNOUP_STARTDSP1 	0x102D80
+#define 	XRAMINDOPERREFNOUP_ENDDSP1	0x102D9C
+#define 	XRAMINDOPERREFUP_STARTDSP1	0x102DA0
+#define 	XRAMINDOPERREFUP_ENDDSP1	0x102DBC
+#define 	YRAMINDOPERREFNOUP_STARTDSP1 	0x102DC0
+#define 	YRAMINDOPERREFNOUP_ENDDSP1	0x102DDC
+#define 	YRAMINDOPERREFUP_STARTDSP1	0x102DE0
+#define 	YRAMINDOPERREFUP_ENDDSP1	0x102DFC
+
+#define 	DSP1CONDCODE 			0x102E00
+#define 	DSP1STACKFLAG 			0x102E04
+#define 	DSP1PROGCOUNTSTACKPTREG 	0x102E08
+#define 	DSP1PROGCOUNTSTACKDATAREG 	0x102E0C
+#define 	DSP1CURLOOPADDRREG 		0x102E10
+#define 	DSP1CURLOOPCOUNT 		0x102E14
+#define 	DSP1TOPLOOPCOUNTSTACK 		0x102E18
+#define 	DSP1TOPLOOPADDRSTACK 		0x102E1C
+#define 	DSP1LOOPSTACKPTR 		0x102E20
+#define 	DSP1STASSTACKDATAREG 		0x102E24
+#define 	DSP1STASSTACKPTR 		0x102E28
+#define 	DSP1PROGCOUNT 			0x102E2C
+#define 	DSP1XYRAMBASE_START 		0x102EA0
+#define 	DSP1XYRAMBASE_END 		0x102EBC
+#define 	DSP1XYRAMLENG_START 		0x102EC0
+#define 	DSP1XYRAMLENG_END 		0x102EDC
+#define		SEMAPHOREREGDSP1		0x102EE0
+#define		DSP1INTCONTMASKREG		0x102EE4
+#define		DSP1INTCONTPENDREG		0x102EE8
+#define		DSP1INTCONTSERVINT		0x102EEC
+#define		GPIODSP1			0x102EFC
+#define 	DMADSPBASEADDRREG_STARTDSP1	0x102F00
+#define 	DMADSPBASEADDRREG_ENDDSP1	0x102F1C
+#define 	DMAHOSTBASEADDRREG_STARTDSP1	0x102F20
+#define 	DMAHOSTBASEADDRREG_ENDDSP1	0x102F3C
+#define 	DMADSPCURADDRREG_STARTDSP1	0x102F40
+#define 	DMADSPCURADDRREG_ENDDSP1	0x102F5C
+#define 	DMAHOSTCURADDRREG_STARTDSP1	0x102F60
+#define 	DMAHOSTCURADDRREG_ENDDSP1	0x102F7C
+#define 	DMATANXCOUNTREG_STARTDSP1	0x102F80
+#define 	DMATANXCOUNTREG_ENDDSP1		0x102F9C
+#define 	DMATIMEBUGREG_STARTDSP1		0x102FA0
+#define 	DMATIMEBUGREG_ENDDSP1		0x102FAC
+#define 	DMACNTLMODFREG_STARTDSP1	0x102FA0
+#define 	DMACNTLMODFREG_ENDDSP1		0x102FAC
+
+#define 	DMAGLOBSTATSREGDSP1		0x102FEC
+#define 	DSP1XGPRAM_START 		0x103000
+#define 	DSP1XGPRAM_END 			0x1033FC
+#define 	DSP1YGPRAM_START 		0x103400
+#define 	DSP1YGPRAM_END 			0x1037FC
+
+
+
+#define 	AUDIORINGIPDSP2_START 		0x104000
+#define 	AUDIORINGIPDSP2_END	 	0x1043FC
+#define 	AUDIORINGOPDSP2_START 		0x104400
+#define 	AUDIORINGOPDSP2_END	 	0x1047FC
+#define 	AUDPARARINGIODSP2_START 	0x104800
+#define 	AUDPARARINGIODSP2_END	 	0x104BFC
+#define 	DSP2LOCALHWREG_START 		0x104C00
+#define 	DSP2LOCALHWREG_END	 	0x104C3C
+#define 	DSP2XYRAMAGINDEX_START 		0x104C40
+#define 	DSP2XYRAMAGINDEX_END	 	0x104C5C
+#define 	DSP2XYRAMAGMDFR_START 		0x104C60
+#define 	DSP2XYRAMAGMDFR_END		0x104C7C
+#define 	DSP2INTCONTLVEC_START 		0x104C80
+#define 	DSP2INTCONTLVEC_END	 	0x104CD8
+#define		HOSTINTFPORTADDRCONTDSP2	0x104D40
+#define		HOSTINTFPORTDATADSP2		0x104D44
+#define		TIME0PERENBDSP2			0x104D60
+#define		TIME0COUNTERDSP2		0x104D64
+#define		TIME1PERENBDSP2			0x104D68
+#define		TIME1COUNTERDSP2		0x104D6C
+#define		TIME2PERENBDSP2			0x104D70
+#define		TIME2COUNTERDSP2		0x104D74
+#define		TIME3PERENBDSP2			0x104D78
+#define		TIME3COUNTERDSP2		0x104D7C
+#define 	XRAMINDOPERREFNOUP_STARTDSP2 	0x104D80
+#define 	XRAMINDOPERREFNOUP_ENDDSP2	0x104D9C
+#define 	XRAMINDOPERREFUP_STARTDSP2	0x104DA0
+#define 	XRAMINDOPERREFUP_ENDDSP2	0x104DBC
+#define 	YRAMINDOPERREFNOUP_STARTDSP2 	0x104DC0
+#define 	YRAMINDOPERREFNOUP_ENDDSP2	0x104DDC
+#define 	YRAMINDOPERREFUP_STARTDSP2	0x104DE0
+#define 	YRAMINDOPERREFUP_ENDDSP2 	0x104DFC
+#define 	DSP2CONDCODE 			0x104E00
+#define 	DSP2STACKFLAG 			0x104E04
+#define 	DSP2PROGCOUNTSTACKPTREG 	0x104E08
+#define 	DSP2PROGCOUNTSTACKDATAREG 	0x104E0C
+#define 	DSP2CURLOOPADDRREG 		0x104E10
+#define 	DSP2CURLOOPCOUNT 		0x104E14
+#define 	DSP2TOPLOOPCOUNTSTACK 		0x104E18
+#define 	DSP2TOPLOOPADDRSTACK 		0x104E1C
+#define 	DSP2LOOPSTACKPTR 		0x104E20
+#define 	DSP2STASSTACKDATAREG 		0x104E24
+#define 	DSP2STASSTACKPTR 		0x104E28
+#define 	DSP2PROGCOUNT 			0x104E2C
+#define 	DSP2XYRAMBASE_START 		0x104EA0
+#define 	DSP2XYRAMBASE_END 		0x104EBC
+#define 	DSP2XYRAMLENG_START 		0x104EC0
+#define 	DSP2XYRAMLENG_END 		0x104EDC
+#define		SEMAPHOREREGDSP2		0x104EE0
+#define		DSP2INTCONTMASKREG		0x104EE4
+#define		DSP2INTCONTPENDREG		0x104EE8
+#define		DSP2INTCONTSERVINT		0x104EEC
+#define		GPIODSP2			0x104EFC
+#define 	DMADSPBASEADDRREG_STARTDSP2	0x104F00
+#define 	DMADSPBASEADDRREG_ENDDSP2	0x104F1C
+#define 	DMAHOSTBASEADDRREG_STARTDSP2	0x104F20
+#define 	DMAHOSTBASEADDRREG_ENDDSP2	0x104F3C
+#define 	DMADSPCURADDRREG_STARTDSP2	0x104F40
+#define 	DMADSPCURADDRREG_ENDDSP2	0x104F5C
+#define 	DMAHOSTCURADDRREG_STARTDSP2	0x104F60
+#define 	DMAHOSTCURADDRREG_ENDDSP2	0x104F7C
+#define 	DMATANXCOUNTREG_STARTDSP2	0x104F80
+#define 	DMATANXCOUNTREG_ENDDSP2		0x104F9C
+#define 	DMATIMEBUGREG_STARTDSP2		0x104FA0
+#define 	DMATIMEBUGREG_ENDDSP2		0x104FAC
+#define 	DMACNTLMODFREG_STARTDSP2	0x104FA0
+#define 	DMACNTLMODFREG_ENDDSP2		0x104FAC
+
+#define 	DMAGLOBSTATSREGDSP2		0x104FEC
+#define 	DSP2XGPRAM_START 		0x105000
+#define 	DSP2XGPRAM_END 			0x1051FC
+#define 	DSP2YGPRAM_START 		0x105800
+#define 	DSP2YGPRAM_END 			0x1059FC
+
+
+
+#define 	AUDIORINGIPDSP3_START 		0x106000
+#define 	AUDIORINGIPDSP3_END	 	0x1063FC
+#define 	AUDIORINGOPDSP3_START 		0x106400
+#define 	AUDIORINGOPDSP3_END	 	0x1067FC
+#define 	AUDPARARINGIODSP3_START 	0x106800
+#define 	AUDPARARINGIODSP3_END	 	0x106BFC
+#define 	DSP3LOCALHWREG_START 		0x106C00
+#define 	DSP3LOCALHWREG_END	 	0x106C3C
+#define 	DSP3XYRAMAGINDEX_START 		0x106C40
+#define 	DSP3XYRAMAGINDEX_END	 	0x106C5C
+#define 	DSP3XYRAMAGMDFR_START 		0x106C60
+#define 	DSP3XYRAMAGMDFR_END		0x106C7C
+#define 	DSP3INTCONTLVEC_START 		0x106C80
+#define 	DSP3INTCONTLVEC_END	 	0x106CD8
+#define		HOSTINTFPORTADDRCONTDSP3	0x106D40
+#define		HOSTINTFPORTDATADSP3		0x106D44
+#define		TIME0PERENBDSP3			0x106D60
+#define		TIME0COUNTERDSP3		0x106D64
+#define		TIME1PERENBDSP3			0x106D68
+#define		TIME1COUNTERDSP3		0x106D6C
+#define		TIME2PERENBDSP3			0x106D70
+#define		TIME2COUNTERDSP3		0x106D74
+#define		TIME3PERENBDSP3			0x106D78
+#define		TIME3COUNTERDSP3		0x106D7C
+#define 	XRAMINDOPERREFNOUP_STARTDSP3 	0x106D80
+#define 	XRAMINDOPERREFNOUP_ENDDSP3	0x106D9C
+#define 	XRAMINDOPERREFUP_STARTDSP3	0x106DA0
+#define 	XRAMINDOPERREFUP_ENDDSP3	0x106DBC
+#define 	YRAMINDOPERREFNOUP_STARTDSP3 	0x106DC0
+#define 	YRAMINDOPERREFNOUP_ENDDSP3	0x106DDC
+#define 	YRAMINDOPERREFUP_STARTDSP3	0x106DE0
+#define 	YRAMINDOPERREFUP_ENDDSP3	0x100DFC
+
+#define 	DSP3CONDCODE 			0x106E00
+#define 	DSP3STACKFLAG 			0x106E04
+#define 	DSP3PROGCOUNTSTACKPTREG 	0x106E08
+#define 	DSP3PROGCOUNTSTACKDATAREG 	0x106E0C
+#define 	DSP3CURLOOPADDRREG 		0x106E10
+#define 	DSP3CURLOOPCOUNT 		0x106E14
+#define 	DSP3TOPLOOPCOUNTSTACK 		0x106E18
+#define 	DSP3TOPLOOPADDRSTACK 		0x106E1C
+#define 	DSP3LOOPSTACKPTR 		0x106E20
+#define 	DSP3STASSTACKDATAREG 		0x106E24
+#define 	DSP3STASSTACKPTR 		0x106E28
+#define 	DSP3PROGCOUNT 			0x106E2C
+#define 	DSP3XYRAMBASE_START 		0x106EA0
+#define 	DSP3XYRAMBASE_END 		0x106EBC
+#define 	DSP3XYRAMLENG_START 		0x106EC0
+#define 	DSP3XYRAMLENG_END 		0x106EDC
+#define		SEMAPHOREREGDSP3		0x106EE0
+#define		DSP3INTCONTMASKREG		0x106EE4
+#define		DSP3INTCONTPENDREG		0x106EE8
+#define		DSP3INTCONTSERVINT		0x106EEC
+#define		GPIODSP3			0x106EFC
+#define 	DMADSPBASEADDRREG_STARTDSP3	0x106F00
+#define 	DMADSPBASEADDRREG_ENDDSP3	0x106F1C
+#define 	DMAHOSTBASEADDRREG_STARTDSP3	0x106F20
+#define 	DMAHOSTBASEADDRREG_ENDDSP3	0x106F3C
+#define 	DMADSPCURADDRREG_STARTDSP3	0x106F40
+#define 	DMADSPCURADDRREG_ENDDSP3	0x106F5C
+#define 	DMAHOSTCURADDRREG_STARTDSP3	0x106F60
+#define 	DMAHOSTCURADDRREG_ENDDSP3	0x106F7C
+#define 	DMATANXCOUNTREG_STARTDSP3	0x106F80
+#define 	DMATANXCOUNTREG_ENDDSP3		0x106F9C
+#define 	DMATIMEBUGREG_STARTDSP3		0x106FA0
+#define 	DMATIMEBUGREG_ENDDSP3		0x106FAC
+#define 	DMACNTLMODFREG_STARTDSP3	0x106FA0
+#define 	DMACNTLMODFREG_ENDDSP3		0x106FAC
+
+#define 	DMAGLOBSTATSREGDSP3		0x106FEC
+#define 	DSP3XGPRAM_START 		0x107000
+#define 	DSP3XGPRAM_END 			0x1071FC
+#define 	DSP3YGPRAM_START 		0x107800
+#define 	DSP3YGPRAM_END 			0x1079FC
+
+/* end of DSP reg definitions */
+
+#define  	DSPAIMAP_START			0x108000
+#define  	DSPAIMAP_END			0x1083FC
+#define  	DSPPIMAP_START			0x108400
+#define  	DSPPIMAP_END			0x1087FC
+#define  	DSPPOMAP_START			0x108800
+#define  	DSPPOMAP_END			0x108BFC
+#define  	DSPPOCTL			0x108C00
+#define 	TKCTL_START			0x110000
+#define 	TKCTL_END			0x110FFC
+#define 	TKCC_START			0x111000
+#define 	TKCC_END			0x111FFC
+#define 	TKIMAP_START			0x112000
+#define 	TKIMAP_END			0x112FFC
+#define		TKDCTR16			0x113000
+#define		TKPB16				0x113004
+#define		TKBS16				0x113008
+#define		TKDCTR32			0x11300C
+#define		TKPB32				0x113010
+#define		TKBS32				0x113014
+#define		ICDCTR16			0x113018
+#define		ITBS16				0x11301C
+#define		ICDCTR32			0x113020
+#define		ITBS32				0x113024
+#define		ITSTART				0x113028
+#define		TKSQ				0x11302C
+
+#define		TKSCCTL_START			0x114000
+#define		TKSCCTL_END			0x11403C
+#define		TKSCADR_START			0x114100
+#define		TKSCADR_END			0x11413C
+#define		TKSCDATAX_START			0x114800
+#define		TKSCDATAX_END			0x1149FC
+#define		TKPCDATAX_START			0x120000
+#define		TKPCDATAX_END			0x12FFFC
+
+#define		MALSA				0x130000
+#define		MAPPHA				0x130004
+#define		MAPPLA				0x130008
+#define		MALSB				0x130010
+#define		MAPPHB				0x130014
+#define		MAPPLB				0x130018
+
+#define 	TANSPORTMAPABREGS_START		0x130020
+#define 	TANSPORTMAPABREGS_END		0x13A2FC
+
+#define		PTPAHX				0x13B000
+#define		PTPALX				0x13B004
+
+#define		TANSPPAGETABLEPHYADDR015_START	0x13B008
+#define		TANSPPAGETABLEPHYADDR015_END	0x13B07C
+#define		TRNQADRX_START			0x13B100
+#define		TRNQADRX_END			0x13B13C
+#define		TRNQTIMX_START			0x13B200
+#define		TRNQTIMX_END			0x13B23C
+#define		TRNQAPARMX_START		0x13B300
+#define		TRNQAPARMX_END			0x13B33C
+
+#define		TRNQCNT				0x13B400
+#define		TRNCTL				0x13B404
+#define		TRNIS				0x13B408
+#define		TRNCURTS			0x13B40C
+
+#define		AMOP_START			0x140000
+#define		AMOPLO				0x140000
+#define		AMOPHI				0x140004
+#define		AMOP_END			0x147FFC
+#define		PMOP_START			0x148000
+#define		PMOPLO				0x148000
+#define		PMOPHI				0x148004
+#define		PMOP_END			0x14FFFC
+#define		PCURR_START			0x150000
+#define		PCURR_END			0x153FFC
+#define		PTRAG_START			0x154000
+#define		PTRAG_END			0x157FFC
+#define		PSR_START			0x158000
+#define		PSR_END				0x15BFFC
+
+#define		PFSTAT4SEG_START		0x160000
+#define		PFSTAT4SEG_END			0x160BFC
+#define		PFSTAT2SEG_START		0x160C00
+#define		PFSTAT2SEG_END			0x1617FC
+#define		PFTARG4SEG_START		0x164000
+#define		PFTARG4SEG_END			0x164BFC
+#define		PFTARG2SEG_START		0x164C00
+#define		PFTARG2SEG_END			0x1657FC
+#define		PFSR4SEG_START			0x168000
+#define		PFSR4SEG_END			0x168BFC
+#define		PFSR2SEG_START			0x168C00
+#define		PFSR2SEG_END			0x1697FC
+#define		PCURRMS4SEG_START		0x16C000
+#define		PCURRMS4SEG_END			0x16CCFC
+#define		PCURRMS2SEG_START		0x16CC00
+#define		PCURRMS2SEG_END			0x16D7FC
+#define		PTARGMS4SEG_START		0x170000
+#define		PTARGMS4SEG_END			0x172FFC
+#define		PTARGMS2SEG_START		0x173000
+#define		PTARGMS2SEG_END			0x1747FC
+#define		PSRMS4SEG_START			0x170000
+#define		PSRMS4SEG_END			0x172FFC
+#define		PSRMS2SEG_START			0x173000
+#define		PSRMS2SEG_END			0x1747FC
+
+#define		PRING_LO_START			0x190000
+#define		PRING_LO_END			0x193FFC
+#define		PRING_HI_START			0x194000
+#define		PRING_HI_END			0x197FFC
+#define		PRING_LO_HI_START		0x198000
+#define		PRING_LO_HI			0x198000
+#define		PRING_LO_HI_END			0x19BFFC
+
+#define		PINTFIFO			0x1A0000
+#define		SRCCTL				0x1B0000
+#define		SRCCCR				0x1B0004
+#define		SRCIMAP				0x1B0008
+#define		SRCODDC				0x1B000C
+#define		SRCCA				0x1B0010
+#define		SRCCF				0x1B0014
+#define		SRCSA				0x1B0018
+#define		SRCLA				0x1B001C
+#define		SRCCTLSWR			0x1B0020
+
+/* SRC HERE */
+#define		SRCALBA				0x1B002C
+#define		SRCMCTL				0x1B012C
+#define		SRCCERR				0x1B022C
+#define		SRCITB				0x1B032C
+#define		SRCIPM				0x1B082C
+#define		SRCIP				0x1B102C
+#define		SRCENBSTAT			0x1B202C
+#define		SRCENBLO			0x1B212C
+#define		SRCENBHI			0x1B222C
+#define		SRCENBS				0x1B232C
+#define		SRCENB				0x1B282C
+#define		SRCENB07			0x1B282C
+#define		SRCENBS07			0x1B302C
+
+#define		SRCDN0Z				0x1B0030
+#define		SRCDN0Z0			0x1B0030
+#define		SRCDN0Z1			0x1B0034
+#define		SRCDN0Z2			0x1B0038
+#define		SRCDN0Z3			0x1B003C
+#define		SRCDN1Z				0x1B0040
+#define		SRCDN1Z0			0x1B0040
+#define		SRCDN1Z1			0x1B0044
+#define		SRCDN1Z2			0x1B0048
+#define		SRCDN1Z3			0x1B004C
+#define		SRCDN1Z4			0x1B0050
+#define		SRCDN1Z5			0x1B0054
+#define		SRCDN1Z6			0x1B0058
+#define		SRCDN1Z7			0x1B005C
+#define		SRCUPZ				0x1B0060
+#define		SRCUPZ0				0x1B0060
+#define		SRCUPZ1				0x1B0064
+#define		SRCUPZ2				0x1B0068
+#define		SRCUPZ3				0x1B006C
+#define		SRCUPZ4				0x1B0070
+#define		SRCUPZ5				0x1B0074
+#define		SRCUPZ6				0x1B0078
+#define		SRCUPZ7				0x1B007C
+#define		SRCCD0				0x1B0080
+#define		SRCCD1				0x1B0084
+#define		SRCCD2				0x1B0088
+#define		SRCCD3				0x1B008C
+#define		SRCCD4				0x1B0090
+#define		SRCCD5				0x1B0094
+#define		SRCCD6				0x1B0098
+#define		SRCCD7				0x1B009C
+#define		SRCCD8				0x1B00A0
+#define		SRCCD9				0x1B00A4
+#define		SRCCDA				0x1B00A8
+#define		SRCCDB				0x1B00AC
+#define		SRCCDC				0x1B00B0
+#define		SRCCDD				0x1B00B4
+#define		SRCCDE				0x1B00B8
+#define		SRCCDF				0x1B00BC
+#define		SRCCD10				0x1B00C0
+#define		SRCCD11				0x1B00C4
+#define		SRCCD12				0x1B00C8
+#define		SRCCD13				0x1B00CC
+#define		SRCCD14				0x1B00D0
+#define		SRCCD15				0x1B00D4
+#define		SRCCD16				0x1B00D8
+#define		SRCCD17				0x1B00DC
+#define		SRCCD18				0x1B00E0
+#define		SRCCD19				0x1B00E4
+#define		SRCCD1A				0x1B00E8
+#define		SRCCD1B				0x1B00EC
+#define		SRCCD1C				0x1B00F0
+#define		SRCCD1D				0x1B00F4
+#define		SRCCD1E				0x1B00F8
+#define		SRCCD1F				0x1B00FC
+
+#define		SRCCONTRBLOCK_START		0x1B0100
+#define		SRCCONTRBLOCK_END		0x1BFFFC
+#define		FILTOP_START	0x1C0000
+#define		FILTOP_END	0x1C05FC
+#define		FILTIMAP_START	0x1C0800
+#define		FILTIMAP_END	0x1C0DFC
+#define		FILTZ1_START	0x1C1000
+#define		FILTZ1_END	0x1C15FC
+#define		FILTZ2_START	0x1C1800
+#define		FILTZ2_END	0x1C1DFC
+#define		DAOIMAP_START	0x1C5000
+#define		DAOIMAP		0x1C5000
+#define		DAOIMAP_END	0x1C5124
+
+#define		AC97D		0x1C5400
+#define		AC97A		0x1C5404
+#define		AC97CTL		0x1C5408
+#define		I2SCTL		0x1C5420
+
+#define		SPOS		0x1C5440
+#define		SPOSA		0x1C5440
+#define		SPOSB		0x1C5444
+#define		SPOSC		0x1C5448
+#define		SPOSD		0x1C544C
+
+#define		SPISA		0x1C5450
+#define		SPISB		0x1C5454
+#define		SPISC		0x1C5458
+#define		SPISD		0x1C545C
+
+#define		SPFSCTL		0x1C5460
+
+#define		SPFS0		0x1C5468
+#define		SPFS1		0x1C546C
+#define		SPFS2		0x1C5470
+#define		SPFS3		0x1C5474
+#define		SPFS4		0x1C5478
+#define		SPFS5		0x1C547C
+
+#define		SPOCTL		0x1C5480
+#define		SPICTL		0x1C5484
+#define		SPISTS		0x1C5488
+#define		SPINTP		0x1C548C
+#define		SPINTE		0x1C5490
+#define		SPUTCTLAB	0x1C5494
+#define		SPUTCTLCD	0x1C5498
+
+#define		SRTSPA		0x1C54C0
+#define		SRTSPB		0x1C54C4
+#define		SRTSPC		0x1C54C8
+#define		SRTSPD		0x1C54CC
+
+#define		SRTSCTL		0x1C54D0
+#define		SRTSCTLA	0x1C54D0
+#define		SRTSCTLB	0x1C54D4
+#define		SRTSCTLC	0x1C54D8
+#define		SRTSCTLD	0x1C54DC
+
+#define		SRTI2S		0x1C54E0
+#define		SRTICTL		0x1C54F0
+
+#define		WC		0x1C6000
+#define		TIMR		0x1C6004
+# define	TIMR_IE		(1<<15)
+# define	TIMR_IP		(1<<14)
+
+#define		GIP		0x1C6010
+#define		GIE		0x1C6014
+#define		DIE		0x1C6018
+#define		DIC		0x1C601C
+#define		GPIO		0x1C6020
+#define		GPIOCTL		0x1C6024
+#define		GPIP		0x1C6028
+#define		GPIE		0x1C602C
+#define		DSPINT0		0x1C6030
+#define		DSPEIOC		0x1C6034
+#define		MUADAT		0x1C6040
+#define		MUACMD		0x1C6044
+#define 	MUASTAT		0x1C6044
+#define		MUBDAT		0x1C6048
+#define		MUBCMD		0x1C604C
+#define		MUBSTAT		0x1C604C
+#define		UARTCMA		0x1C6050
+#define		UARTCMB		0x1C6054
+#define		UARTIP		0x1C6058
+#define		UARTIE		0x1C605C
+#define		PLLCTL		0x1C6060
+#define		PLLDCD		0x1C6064
+#define		GCTL		0x1C6070
+#define		ID0		0x1C6080
+#define		ID1		0x1C6084
+#define		ID2		0x1C6088
+#define		ID3		0x1C608C
+#define		SDRCTL		0x1C7000
+
+
+#define I2SA_L    0x0L
+#define I2SA_R    0x1L
+#define I2SB_L    0x8L
+#define I2SB_R    0x9L
+#define I2SC_L    0x10L
+#define I2SC_R    0x11L
+#define I2SD_L    0x18L
+#define I2SD_R    0x19L
+
+#endif /* CT20K1REG_H */
+
+
diff --git a/sound/pci/ctxfi/ct20k2reg.h b/sound/pci/ctxfi/ct20k2reg.h
new file mode 100644
index 0000000..2d07986
--- /dev/null
+++ b/sound/pci/ctxfi/ct20k2reg.h
@@ -0,0 +1,85 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ */
+
+#ifndef _20K2REGISTERS_H_
+#define _20K2REGISTERS_H_
+
+
+/* Timer Registers */
+#define TIMER_TIMR          0x1B7004
+#define INTERRUPT_GIP       0x1B7010
+#define INTERRUPT_GIE       0x1B7014
+
+/* I2C Registers */
+#define I2C_IF_ADDRESS   0x1B9000
+#define I2C_IF_WDATA     0x1B9004
+#define I2C_IF_RDATA     0x1B9008
+#define I2C_IF_STATUS    0x1B900C
+#define I2C_IF_WLOCK     0x1B9010
+
+/* Global Control Registers */
+#define GLOBAL_CNTL_GCTL    0x1B7090
+
+/* PLL Registers */
+#define PLL_CTL 		0x1B7080
+#define PLL_STAT		0x1B7084
+#define PLL_ENB			0x1B7088
+
+/* SRC Registers */
+#define SRC_CTL             0x1A0000 /* 0x1A0000 + (256 * Chn) */
+#define SRC_CCR             0x1A0004 /* 0x1A0004 + (256 * Chn) */
+#define SRC_IMAP            0x1A0008 /* 0x1A0008 + (256 * Chn) */
+#define SRC_CA              0x1A0010 /* 0x1A0010 + (256 * Chn) */
+#define SRC_CF              0x1A0014 /* 0x1A0014 + (256 * Chn) */
+#define SRC_SA              0x1A0018 /* 0x1A0018 + (256 * Chn) */
+#define SRC_LA              0x1A001C /* 0x1A001C + (256 * Chn) */
+#define SRC_CTLSWR	    0x1A0020 /* 0x1A0020 + (256 * Chn) */
+#define SRC_CD		    0x1A0080 /* 0x1A0080 + (256 * Chn) + (4 * Regn) */
+#define SRC_MCTL		0x1A012C
+#define SRC_IP			0x1A102C /* 0x1A102C + (256 * Regn) */
+#define SRC_ENB			0x1A282C /* 0x1A282C + (256 * Regn) */
+#define SRC_ENBSTAT		0x1A202C
+#define SRC_ENBSA		0x1A232C
+#define SRC_DN0Z		0x1A0030
+#define SRC_DN1Z		0x1A0040
+#define SRC_UPZ			0x1A0060
+
+/* GPIO Registers */
+#define GPIO_DATA           0x1B7020
+#define GPIO_CTRL           0x1B7024
+
+/* Virtual memory registers */
+#define VMEM_PTPAL          0x1C6300 /* 0x1C6300 + (16 * Chn) */
+#define VMEM_PTPAH          0x1C6304 /* 0x1C6304 + (16 * Chn) */
+#define VMEM_CTL            0x1C7000
+
+/* Transport Registers */
+#define TRANSPORT_ENB       0x1B6000
+#define TRANSPORT_CTL       0x1B6004
+#define TRANSPORT_INT       0x1B6008
+
+/* Audio IO */
+#define AUDIO_IO_AIM        0x1B5000 /* 0x1B5000 + (0x04 * Chn) */
+#define AUDIO_IO_TX_CTL     0x1B5400 /* 0x1B5400 + (0x40 * Chn) */
+#define AUDIO_IO_TX_CSTAT_L 0x1B5408 /* 0x1B5408 + (0x40 * Chn) */
+#define AUDIO_IO_TX_CSTAT_H 0x1B540C /* 0x1B540C + (0x40 * Chn) */
+#define AUDIO_IO_RX_CTL     0x1B5410 /* 0x1B5410 + (0x40 * Chn) */
+#define AUDIO_IO_RX_SRT_CTL 0x1B5420 /* 0x1B5420 + (0x40 * Chn) */
+#define AUDIO_IO_MCLK       0x1B5600
+#define AUDIO_IO_TX_BLRCLK  0x1B5604
+#define AUDIO_IO_RX_BLRCLK  0x1B5608
+
+/* Mixer */
+#define MIXER_AMOPLO		0x130000 /* 0x130000 + (8 * Chn) [4095 : 0] */
+#define MIXER_AMOPHI		0x130004 /* 0x130004 + (8 * Chn) [4095 : 0] */
+#define MIXER_PRING_LO_HI	0x188000 /* 0x188000 + (4 * Chn) [4095 : 0] */
+#define MIXER_PMOPLO		0x138000 /* 0x138000 + (8 * Chn) [4095 : 0] */
+#define MIXER_PMOPHI		0x138004 /* 0x138004 + (8 * Chn) [4095 : 0] */
+#define MIXER_AR_ENABLE		0x19000C
+
+#endif
diff --git a/sound/pci/ctxfi/ctamixer.c b/sound/pci/ctxfi/ctamixer.c
new file mode 100644
index 0000000..a1db51b3
--- /dev/null
+++ b/sound/pci/ctxfi/ctamixer.c
@@ -0,0 +1,488 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctamixer.c
+ *
+ * @Brief
+ * This file contains the implementation of the Audio Mixer
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 21 2008
+ *
+ */
+
+#include "ctamixer.h"
+#include "cthardware.h"
+#include <linux/slab.h>
+
+#define AMIXER_RESOURCE_NUM	256
+#define SUM_RESOURCE_NUM	256
+
+#define AMIXER_Y_IMMEDIATE	1
+
+#define BLANK_SLOT		4094
+
+static int amixer_master(struct rsc *rsc)
+{
+	rsc->conj = 0;
+	return rsc->idx = container_of(rsc, struct amixer, rsc)->idx[0];
+}
+
+static int amixer_next_conj(struct rsc *rsc)
+{
+	rsc->conj++;
+	return container_of(rsc, struct amixer, rsc)->idx[rsc->conj];
+}
+
+static int amixer_index(const struct rsc *rsc)
+{
+	return container_of(rsc, struct amixer, rsc)->idx[rsc->conj];
+}
+
+static int amixer_output_slot(const struct rsc *rsc)
+{
+	return (amixer_index(rsc) << 4) + 0x4;
+}
+
+static struct rsc_ops amixer_basic_rsc_ops = {
+	.master		= amixer_master,
+	.next_conj	= amixer_next_conj,
+	.index		= amixer_index,
+	.output_slot	= amixer_output_slot,
+};
+
+static int amixer_set_input(struct amixer *amixer, struct rsc *rsc)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	hw->amixer_set_mode(amixer->rsc.ctrl_blk, AMIXER_Y_IMMEDIATE);
+	amixer->input = rsc;
+	if (NULL == rsc)
+		hw->amixer_set_x(amixer->rsc.ctrl_blk, BLANK_SLOT);
+	else
+		hw->amixer_set_x(amixer->rsc.ctrl_blk,
+					rsc->ops->output_slot(rsc));
+
+	return 0;
+}
+
+/* y is a 14-bit immediate constant */
+static int amixer_set_y(struct amixer *amixer, unsigned int y)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	hw->amixer_set_y(amixer->rsc.ctrl_blk, y);
+
+	return 0;
+}
+
+static int amixer_set_invalid_squash(struct amixer *amixer, unsigned int iv)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	hw->amixer_set_iv(amixer->rsc.ctrl_blk, iv);
+
+	return 0;
+}
+
+static int amixer_set_sum(struct amixer *amixer, struct sum *sum)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	amixer->sum = sum;
+	if (NULL == sum) {
+		hw->amixer_set_se(amixer->rsc.ctrl_blk, 0);
+	} else {
+		hw->amixer_set_se(amixer->rsc.ctrl_blk, 1);
+		hw->amixer_set_sadr(amixer->rsc.ctrl_blk,
+					sum->rsc.ops->index(&sum->rsc));
+	}
+
+	return 0;
+}
+
+static int amixer_commit_write(struct amixer *amixer)
+{
+	struct hw *hw;
+	unsigned int index;
+	int i;
+	struct rsc *input;
+	struct sum *sum;
+
+	hw = amixer->rsc.hw;
+	input = amixer->input;
+	sum = amixer->sum;
+
+	/* Program master and conjugate resources */
+	amixer->rsc.ops->master(&amixer->rsc);
+	if (NULL != input)
+		input->ops->master(input);
+
+	if (NULL != sum)
+		sum->rsc.ops->master(&sum->rsc);
+
+	for (i = 0; i < amixer->rsc.msr; i++) {
+		hw->amixer_set_dirty_all(amixer->rsc.ctrl_blk);
+		if (NULL != input) {
+			hw->amixer_set_x(amixer->rsc.ctrl_blk,
+						input->ops->output_slot(input));
+			input->ops->next_conj(input);
+		}
+		if (NULL != sum) {
+			hw->amixer_set_sadr(amixer->rsc.ctrl_blk,
+						sum->rsc.ops->index(&sum->rsc));
+			sum->rsc.ops->next_conj(&sum->rsc);
+		}
+		index = amixer->rsc.ops->output_slot(&amixer->rsc);
+		hw->amixer_commit_write(hw, index, amixer->rsc.ctrl_blk);
+		amixer->rsc.ops->next_conj(&amixer->rsc);
+	}
+	amixer->rsc.ops->master(&amixer->rsc);
+	if (NULL != input)
+		input->ops->master(input);
+
+	if (NULL != sum)
+		sum->rsc.ops->master(&sum->rsc);
+
+	return 0;
+}
+
+static int amixer_commit_raw_write(struct amixer *amixer)
+{
+	struct hw *hw;
+	unsigned int index;
+
+	hw = amixer->rsc.hw;
+	index = amixer->rsc.ops->output_slot(&amixer->rsc);
+	hw->amixer_commit_write(hw, index, amixer->rsc.ctrl_blk);
+
+	return 0;
+}
+
+static int amixer_get_y(struct amixer *amixer)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	return hw->amixer_get_y(amixer->rsc.ctrl_blk);
+}
+
+static int amixer_setup(struct amixer *amixer, struct rsc *input,
+			unsigned int scale, struct sum *sum)
+{
+	amixer_set_input(amixer, input);
+	amixer_set_y(amixer, scale);
+	amixer_set_sum(amixer, sum);
+	amixer_commit_write(amixer);
+	return 0;
+}
+
+static struct amixer_rsc_ops amixer_ops = {
+	.set_input		= amixer_set_input,
+	.set_invalid_squash	= amixer_set_invalid_squash,
+	.set_scale		= amixer_set_y,
+	.set_sum		= amixer_set_sum,
+	.commit_write		= amixer_commit_write,
+	.commit_raw_write	= amixer_commit_raw_write,
+	.setup			= amixer_setup,
+	.get_scale		= amixer_get_y,
+};
+
+static int amixer_rsc_init(struct amixer *amixer,
+			   const struct amixer_desc *desc,
+			   struct amixer_mgr *mgr)
+{
+	int err;
+
+	err = rsc_init(&amixer->rsc, amixer->idx[0],
+			AMIXER, desc->msr, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	/* Set amixer specific operations */
+	amixer->rsc.ops = &amixer_basic_rsc_ops;
+	amixer->ops = &amixer_ops;
+	amixer->input = NULL;
+	amixer->sum = NULL;
+
+	amixer_setup(amixer, NULL, 0, NULL);
+
+	return 0;
+}
+
+static int amixer_rsc_uninit(struct amixer *amixer)
+{
+	amixer_setup(amixer, NULL, 0, NULL);
+	rsc_uninit(&amixer->rsc);
+	amixer->ops = NULL;
+	amixer->input = NULL;
+	amixer->sum = NULL;
+	return 0;
+}
+
+static int get_amixer_rsc(struct amixer_mgr *mgr,
+			  const struct amixer_desc *desc,
+			  struct amixer **ramixer)
+{
+	int err, i;
+	unsigned int idx;
+	struct amixer *amixer;
+	unsigned long flags;
+
+	*ramixer = NULL;
+
+	/* Allocate mem for amixer resource */
+	amixer = kzalloc(sizeof(*amixer), GFP_KERNEL);
+	if (NULL == amixer) {
+		err = -ENOMEM;
+		return err;
+	}
+
+	/* Check whether there are sufficient
+	 * amixer resources to meet request. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < desc->msr; i++) {
+		err = mgr_get_resource(&mgr->mgr, 1, &idx);
+		if (err)
+			break;
+
+		amixer->idx[i] = idx;
+	}
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Can't meet AMIXER resource request!\n");
+		goto error;
+	}
+
+	err = amixer_rsc_init(amixer, desc, mgr);
+	if (err)
+		goto error;
+
+	*ramixer = amixer;
+
+	return 0;
+
+error:
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i--; i >= 0; i--)
+		mgr_put_resource(&mgr->mgr, 1, amixer->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	kfree(amixer);
+	return err;
+}
+
+static int put_amixer_rsc(struct amixer_mgr *mgr, struct amixer *amixer)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < amixer->rsc.msr; i++)
+		mgr_put_resource(&mgr->mgr, 1, amixer->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	amixer_rsc_uninit(amixer);
+	kfree(amixer);
+
+	return 0;
+}
+
+int amixer_mgr_create(void *hw, struct amixer_mgr **ramixer_mgr)
+{
+	int err;
+	struct amixer_mgr *amixer_mgr;
+
+	*ramixer_mgr = NULL;
+	amixer_mgr = kzalloc(sizeof(*amixer_mgr), GFP_KERNEL);
+	if (NULL == amixer_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&amixer_mgr->mgr, AMIXER, AMIXER_RESOURCE_NUM, hw);
+	if (err)
+		goto error;
+
+	spin_lock_init(&amixer_mgr->mgr_lock);
+
+	amixer_mgr->get_amixer = get_amixer_rsc;
+	amixer_mgr->put_amixer = put_amixer_rsc;
+
+	*ramixer_mgr = amixer_mgr;
+
+	return 0;
+
+error:
+	kfree(amixer_mgr);
+	return err;
+}
+
+int amixer_mgr_destroy(struct amixer_mgr *amixer_mgr)
+{
+	rsc_mgr_uninit(&amixer_mgr->mgr);
+	kfree(amixer_mgr);
+	return 0;
+}
+
+/* SUM resource management */
+
+static int sum_master(struct rsc *rsc)
+{
+	rsc->conj = 0;
+	return rsc->idx = container_of(rsc, struct sum, rsc)->idx[0];
+}
+
+static int sum_next_conj(struct rsc *rsc)
+{
+	rsc->conj++;
+	return container_of(rsc, struct sum, rsc)->idx[rsc->conj];
+}
+
+static int sum_index(const struct rsc *rsc)
+{
+	return container_of(rsc, struct sum, rsc)->idx[rsc->conj];
+}
+
+static int sum_output_slot(const struct rsc *rsc)
+{
+	return (sum_index(rsc) << 4) + 0xc;
+}
+
+static struct rsc_ops sum_basic_rsc_ops = {
+	.master		= sum_master,
+	.next_conj	= sum_next_conj,
+	.index		= sum_index,
+	.output_slot	= sum_output_slot,
+};
+
+static int sum_rsc_init(struct sum *sum,
+			const struct sum_desc *desc,
+			struct sum_mgr *mgr)
+{
+	int err;
+
+	err = rsc_init(&sum->rsc, sum->idx[0], SUM, desc->msr, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	sum->rsc.ops = &sum_basic_rsc_ops;
+
+	return 0;
+}
+
+static int sum_rsc_uninit(struct sum *sum)
+{
+	rsc_uninit(&sum->rsc);
+	return 0;
+}
+
+static int get_sum_rsc(struct sum_mgr *mgr,
+		       const struct sum_desc *desc,
+		       struct sum **rsum)
+{
+	int err, i;
+	unsigned int idx;
+	struct sum *sum;
+	unsigned long flags;
+
+	*rsum = NULL;
+
+	/* Allocate mem for sum resource */
+	sum = kzalloc(sizeof(*sum), GFP_KERNEL);
+	if (NULL == sum) {
+		err = -ENOMEM;
+		return err;
+	}
+
+	/* Check whether there are sufficient sum resources to meet request. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < desc->msr; i++) {
+		err = mgr_get_resource(&mgr->mgr, 1, &idx);
+		if (err)
+			break;
+
+		sum->idx[i] = idx;
+	}
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Can't meet SUM resource request!\n");
+		goto error;
+	}
+
+	err = sum_rsc_init(sum, desc, mgr);
+	if (err)
+		goto error;
+
+	*rsum = sum;
+
+	return 0;
+
+error:
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i--; i >= 0; i--)
+		mgr_put_resource(&mgr->mgr, 1, sum->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	kfree(sum);
+	return err;
+}
+
+static int put_sum_rsc(struct sum_mgr *mgr, struct sum *sum)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < sum->rsc.msr; i++)
+		mgr_put_resource(&mgr->mgr, 1, sum->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	sum_rsc_uninit(sum);
+	kfree(sum);
+
+	return 0;
+}
+
+int sum_mgr_create(void *hw, struct sum_mgr **rsum_mgr)
+{
+	int err;
+	struct sum_mgr *sum_mgr;
+
+	*rsum_mgr = NULL;
+	sum_mgr = kzalloc(sizeof(*sum_mgr), GFP_KERNEL);
+	if (NULL == sum_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&sum_mgr->mgr, SUM, SUM_RESOURCE_NUM, hw);
+	if (err)
+		goto error;
+
+	spin_lock_init(&sum_mgr->mgr_lock);
+
+	sum_mgr->get_sum = get_sum_rsc;
+	sum_mgr->put_sum = put_sum_rsc;
+
+	*rsum_mgr = sum_mgr;
+
+	return 0;
+
+error:
+	kfree(sum_mgr);
+	return err;
+}
+
+int sum_mgr_destroy(struct sum_mgr *sum_mgr)
+{
+	rsc_mgr_uninit(&sum_mgr->mgr);
+	kfree(sum_mgr);
+	return 0;
+}
+
diff --git a/sound/pci/ctxfi/ctamixer.h b/sound/pci/ctxfi/ctamixer.h
new file mode 100644
index 0000000..cc49e5a
--- /dev/null
+++ b/sound/pci/ctxfi/ctamixer.h
@@ -0,0 +1,96 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctamixer.h
+ *
+ * @Brief
+ * This file contains the definition of the Audio Mixer
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 21 2008
+ *
+ */
+
+#ifndef CTAMIXER_H
+#define CTAMIXER_H
+
+#include "ctresource.h"
+#include <linux/spinlock.h>
+
+/* Define the descriptor of a summation node resource */
+struct sum {
+	struct rsc rsc;		/* Basic resource info */
+	unsigned char idx[8];
+};
+
+/* Define sum resource request description info */
+struct sum_desc {
+	unsigned int msr;
+};
+
+struct sum_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+
+	 /* request one sum resource */
+	int (*get_sum)(struct sum_mgr *mgr,
+			const struct sum_desc *desc, struct sum **rsum);
+	/* return one sum resource */
+	int (*put_sum)(struct sum_mgr *mgr, struct sum *sum);
+};
+
+/* Constructor and destructor of daio resource manager */
+int sum_mgr_create(void *hw, struct sum_mgr **rsum_mgr);
+int sum_mgr_destroy(struct sum_mgr *sum_mgr);
+
+/* Define the descriptor of a amixer resource */
+struct amixer_rsc_ops;
+
+struct amixer {
+	struct rsc rsc;		/* Basic resource info */
+	unsigned char idx[8];
+	struct rsc *input;	/* pointer to a resource acting as source */
+	struct sum *sum;	/* Put amixer output to this summation node */
+	struct amixer_rsc_ops *ops;	/* AMixer specific operations */
+};
+
+struct amixer_rsc_ops {
+	int (*set_input)(struct amixer *amixer, struct rsc *rsc);
+	int (*set_scale)(struct amixer *amixer, unsigned int scale);
+	int (*set_invalid_squash)(struct amixer *amixer, unsigned int iv);
+	int (*set_sum)(struct amixer *amixer, struct sum *sum);
+	int (*commit_write)(struct amixer *amixer);
+	/* Only for interleaved recording */
+	int (*commit_raw_write)(struct amixer *amixer);
+	int (*setup)(struct amixer *amixer, struct rsc *input,
+			unsigned int scale, struct sum *sum);
+	int (*get_scale)(struct amixer *amixer);
+};
+
+/* Define amixer resource request description info */
+struct amixer_desc {
+	unsigned int msr;
+};
+
+struct amixer_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+
+	 /* request one amixer resource */
+	int (*get_amixer)(struct amixer_mgr *mgr,
+			  const struct amixer_desc *desc,
+			  struct amixer **ramixer);
+	/* return one amixer resource */
+	int (*put_amixer)(struct amixer_mgr *mgr, struct amixer *amixer);
+};
+
+/* Constructor and destructor of amixer resource manager */
+int amixer_mgr_create(void *hw, struct amixer_mgr **ramixer_mgr);
+int amixer_mgr_destroy(struct amixer_mgr *amixer_mgr);
+
+#endif /* CTAMIXER_H */
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
new file mode 100644
index 0000000..80fb2ba
--- /dev/null
+++ b/sound/pci/ctxfi/ctatc.c
@@ -0,0 +1,1619 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File    ctatc.c
+ *
+ * @Brief
+ * This file contains the implementation of the device resource management
+ * object.
+ *
+ * @Author Liu Chun
+ * @Date Mar 28 2008
+ */
+
+#include "ctatc.h"
+#include "ctpcm.h"
+#include "ctmixer.h"
+#include "cthardware.h"
+#include "ctsrc.h"
+#include "ctamixer.h"
+#include "ctdaio.h"
+#include "cttimer.h"
+#include <linux/delay.h>
+#include <sound/pcm.h>
+#include <sound/control.h>
+#include <sound/asoundef.h>
+
+#define MONO_SUM_SCALE	0x19a8	/* 2^(-0.5) in 14-bit floating format */
+#define DAIONUM		7
+#define MAX_MULTI_CHN	8
+
+#define IEC958_DEFAULT_CON ((IEC958_AES0_NONAUDIO \
+			    | IEC958_AES0_CON_NOT_COPYRIGHT) \
+			    | ((IEC958_AES1_CON_MIXER \
+			    | IEC958_AES1_CON_ORIGINAL) << 8) \
+			    | (0x10 << 16) \
+			    | ((IEC958_AES3_CON_FS_48000) << 24))
+
+static struct snd_pci_quirk __devinitdata subsys_20k1_list[] = {
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0022, "SB055x", CTSB055X),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x002f, "SB055x", CTSB055X),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0029, "SB073x", CTSB073X),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0031, "SB073x", CTSB073X),
+	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_CREATIVE, 0xf000, 0x6000,
+			   "UAA", CTUAA),
+	SND_PCI_QUIRK_VENDOR(PCI_VENDOR_ID_CREATIVE,
+			     "Unknown", CT20K1_UNKNOWN),
+	{ } /* terminator */
+};
+
+static struct snd_pci_quirk __devinitdata subsys_20k2_list[] = {
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB0760,
+		      "SB0760", CTSB0760),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB08801,
+		      "SB0880", CTSB0880),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB08802,
+		      "SB0880", CTSB0880),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB08803,
+		      "SB0880", CTSB0880),
+	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_CREATIVE, 0xf000,
+			   PCI_SUBDEVICE_ID_CREATIVE_HENDRIX, "HENDRIX",
+			   CTHENDRIX),
+	{ } /* terminator */
+};
+
+static const char *ct_subsys_name[NUM_CTCARDS] = {
+	[CTSB055X]	= "SB055x",
+	[CTSB073X]	= "SB073x",
+	[CTSB0760]	= "SB076x",
+	[CTUAA]		= "UAA",
+	[CT20K1_UNKNOWN] = "Unknown",
+	[CTHENDRIX]	= "Hendrix",
+	[CTSB0880]	= "SB0880",
+};
+
+static struct {
+	int (*create)(struct ct_atc *atc,
+			enum CTALSADEVS device, const char *device_name);
+	int (*destroy)(void *alsa_dev);
+	const char *public_name;
+} alsa_dev_funcs[NUM_CTALSADEVS] = {
+	[FRONT]		= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "Front/WaveIn"},
+	[SURROUND]	= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "Surround"},
+	[CLFE]		= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "Center/LFE"},
+	[SIDE]		= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "Side"},
+	[IEC958]	= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "IEC958 Non-audio"},
+
+	[MIXER]		= { .create = ct_alsa_mix_create,
+			    .destroy = NULL,
+			    .public_name = "Mixer"}
+};
+
+typedef int (*create_t)(void *, void **);
+typedef int (*destroy_t)(void *);
+
+static struct {
+	int (*create)(void *hw, void **rmgr);
+	int (*destroy)(void *mgr);
+} rsc_mgr_funcs[NUM_RSCTYP] = {
+	[SRC] 		= { .create 	= (create_t)src_mgr_create,
+			    .destroy 	= (destroy_t)src_mgr_destroy	},
+	[SRCIMP] 	= { .create 	= (create_t)srcimp_mgr_create,
+			    .destroy 	= (destroy_t)srcimp_mgr_destroy	},
+	[AMIXER]	= { .create	= (create_t)amixer_mgr_create,
+			    .destroy	= (destroy_t)amixer_mgr_destroy	},
+	[SUM]		= { .create	= (create_t)sum_mgr_create,
+			    .destroy	= (destroy_t)sum_mgr_destroy	},
+	[DAIO]		= { .create	= (create_t)daio_mgr_create,
+			    .destroy	= (destroy_t)daio_mgr_destroy	}
+};
+
+static int
+atc_pcm_release_resources(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+
+/* *
+ * Only mono and interleaved modes are supported now.
+ * Always allocates a contiguous channel block.
+ * */
+
+static int ct_map_audio_buffer(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct snd_pcm_runtime *runtime;
+	struct ct_vm *vm;
+
+	if (NULL == apcm->substream)
+		return 0;
+
+	runtime = apcm->substream->runtime;
+	vm = atc->vm;
+
+	apcm->vm_block = vm->map(vm, apcm->substream, runtime->dma_bytes);
+
+	if (NULL == apcm->vm_block)
+		return -ENOENT;
+
+	return 0;
+}
+
+static void ct_unmap_audio_buffer(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct ct_vm *vm;
+
+	if (NULL == apcm->vm_block)
+		return;
+
+	vm = atc->vm;
+
+	vm->unmap(vm, apcm->vm_block);
+
+	apcm->vm_block = NULL;
+}
+
+static unsigned long atc_get_ptp_phys(struct ct_atc *atc, int index)
+{
+	struct ct_vm *vm;
+	void *kvirt_addr;
+	unsigned long phys_addr;
+
+	vm = atc->vm;
+	kvirt_addr = vm->get_ptp_virt(vm, index);
+	if (kvirt_addr == NULL)
+		phys_addr = (~0UL);
+	else
+		phys_addr = virt_to_phys(kvirt_addr);
+
+	return phys_addr;
+}
+
+static unsigned int convert_format(snd_pcm_format_t snd_format)
+{
+	switch (snd_format) {
+	case SNDRV_PCM_FORMAT_U8:
+		return SRC_SF_U8;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		return SRC_SF_S16;
+	case SNDRV_PCM_FORMAT_S24_3LE:
+		return SRC_SF_S24;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		return SRC_SF_S32;
+	case SNDRV_PCM_FORMAT_FLOAT_LE:
+		return SRC_SF_F32;
+	default:
+		printk(KERN_ERR "ctxfi: not recognized snd format is %d \n",
+			snd_format);
+		return SRC_SF_S16;
+	}
+}
+
+static unsigned int
+atc_get_pitch(unsigned int input_rate, unsigned int output_rate)
+{
+	unsigned int pitch;
+	int b;
+
+	/* get pitch and convert to fixed-point 8.24 format. */
+	pitch = (input_rate / output_rate) << 24;
+	input_rate %= output_rate;
+	input_rate /= 100;
+	output_rate /= 100;
+	for (b = 31; ((b >= 0) && !(input_rate >> b)); )
+		b--;
+
+	if (b >= 0) {
+		input_rate <<= (31 - b);
+		input_rate /= output_rate;
+		b = 24 - (31 - b);
+		if (b >= 0)
+			input_rate <<= b;
+		else
+			input_rate >>= -b;
+
+		pitch |= input_rate;
+	}
+
+	return pitch;
+}
+
+static int select_rom(unsigned int pitch)
+{
+	if ((pitch > 0x00428f5c) && (pitch < 0x01b851ec)) {
+		/* 0.26 <= pitch <= 1.72 */
+		return 1;
+	} else if ((0x01d66666 == pitch) || (0x01d66667 == pitch)) {
+		/* pitch == 1.8375 */
+		return 2;
+	} else if (0x02000000 == pitch) {
+		/* pitch == 2 */
+		return 3;
+	} else if ((pitch >= 0x0) && (pitch <= 0x08000000)) {
+		/* 0 <= pitch <= 8 */
+		return 0;
+	} else {
+		return -ENOENT;
+	}
+}
+
+static int atc_pcm_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER];
+	struct src_desc desc = {0};
+	struct amixer_desc mix_dsc = {0};
+	struct src *src;
+	struct amixer *amixer;
+	int err;
+	int n_amixer = apcm->substream->runtime->channels, i = 0;
+	int device = apcm->substream->pcm->device;
+	unsigned int pitch;
+	unsigned long flags;
+
+	if (NULL != apcm->src) {
+		/* Prepared pcm playback */
+		return 0;
+	}
+
+	/* first release old resources */
+	atc->pcm_release_resources(atc, apcm);
+
+	/* Get SRC resource */
+	desc.multi = apcm->substream->runtime->channels;
+	desc.msr = atc->msr;
+	desc.mode = MEMRD;
+	err = src_mgr->get_src(src_mgr, &desc, (struct src **)&apcm->src);
+	if (err)
+		goto error1;
+
+	pitch = atc_get_pitch(apcm->substream->runtime->rate,
+						(atc->rsr * atc->msr));
+	src = apcm->src;
+	src->ops->set_pitch(src, pitch);
+	src->ops->set_rom(src, select_rom(pitch));
+	src->ops->set_sf(src, convert_format(apcm->substream->runtime->format));
+	src->ops->set_pm(src, (src->ops->next_interleave(src) != NULL));
+
+	/* Get AMIXER resource */
+	n_amixer = (n_amixer < 2) ? 2 : n_amixer;
+	apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
+	if (NULL == apcm->amixers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+	mix_dsc.msr = atc->msr;
+	for (i = 0, apcm->n_amixer = 0; i < n_amixer; i++) {
+		err = amixer_mgr->get_amixer(amixer_mgr, &mix_dsc,
+					(struct amixer **)&apcm->amixers[i]);
+		if (err)
+			goto error1;
+
+		apcm->n_amixer++;
+	}
+
+	/* Set up device virtual mem map */
+	err = ct_map_audio_buffer(atc, apcm);
+	if (err < 0)
+		goto error1;
+
+	/* Connect resources */
+	src = apcm->src;
+	for (i = 0; i < n_amixer; i++) {
+		amixer = apcm->amixers[i];
+		spin_lock_irqsave(&atc->atc_lock, flags);
+		amixer->ops->setup(amixer, &src->rsc,
+					INIT_VOL, atc->pcm[i+device*2]);
+		spin_unlock_irqrestore(&atc->atc_lock, flags);
+		src = src->ops->next_interleave(src);
+		if (NULL == src)
+			src = apcm->src;
+	}
+
+	ct_timer_prepare(apcm->timer);
+
+	return 0;
+
+error1:
+	atc_pcm_release_resources(atc, apcm);
+	return err;
+}
+
+static int
+atc_pcm_release_resources(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	struct srcimp_mgr *srcimp_mgr = atc->rsc_mgrs[SRCIMP];
+	struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER];
+	struct sum_mgr *sum_mgr = atc->rsc_mgrs[SUM];
+	struct srcimp *srcimp;
+	int i;
+
+	if (NULL != apcm->srcimps) {
+		for (i = 0; i < apcm->n_srcimp; i++) {
+			srcimp = apcm->srcimps[i];
+			srcimp->ops->unmap(srcimp);
+			srcimp_mgr->put_srcimp(srcimp_mgr, srcimp);
+			apcm->srcimps[i] = NULL;
+		}
+		kfree(apcm->srcimps);
+		apcm->srcimps = NULL;
+	}
+
+	if (NULL != apcm->srccs) {
+		for (i = 0; i < apcm->n_srcc; i++) {
+			src_mgr->put_src(src_mgr, apcm->srccs[i]);
+			apcm->srccs[i] = NULL;
+		}
+		kfree(apcm->srccs);
+		apcm->srccs = NULL;
+	}
+
+	if (NULL != apcm->amixers) {
+		for (i = 0; i < apcm->n_amixer; i++) {
+			amixer_mgr->put_amixer(amixer_mgr, apcm->amixers[i]);
+			apcm->amixers[i] = NULL;
+		}
+		kfree(apcm->amixers);
+		apcm->amixers = NULL;
+	}
+
+	if (NULL != apcm->mono) {
+		sum_mgr->put_sum(sum_mgr, apcm->mono);
+		apcm->mono = NULL;
+	}
+
+	if (NULL != apcm->src) {
+		src_mgr->put_src(src_mgr, apcm->src);
+		apcm->src = NULL;
+	}
+
+	if (NULL != apcm->vm_block) {
+		/* Undo device virtual mem map */
+		ct_unmap_audio_buffer(atc, apcm);
+		apcm->vm_block = NULL;
+	}
+
+	return 0;
+}
+
+static int atc_pcm_playback_start(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	unsigned int max_cisz;
+	struct src *src = apcm->src;
+
+	if (apcm->started)
+		return 0;
+	apcm->started = 1;
+
+	max_cisz = src->multi * src->rsc.msr;
+	max_cisz = 0x80 * (max_cisz < 8 ? max_cisz : 8);
+
+	src->ops->set_sa(src, apcm->vm_block->addr);
+	src->ops->set_la(src, apcm->vm_block->addr + apcm->vm_block->size);
+	src->ops->set_ca(src, apcm->vm_block->addr + max_cisz);
+	src->ops->set_cisz(src, max_cisz);
+
+	src->ops->set_bm(src, 1);
+	src->ops->set_state(src, SRC_STATE_INIT);
+	src->ops->commit_write(src);
+
+	ct_timer_start(apcm->timer);
+	return 0;
+}
+
+static int atc_pcm_stop(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src;
+	int i;
+
+	ct_timer_stop(apcm->timer);
+
+	src = apcm->src;
+	src->ops->set_bm(src, 0);
+	src->ops->set_state(src, SRC_STATE_OFF);
+	src->ops->commit_write(src);
+
+	if (NULL != apcm->srccs) {
+		for (i = 0; i < apcm->n_srcc; i++) {
+			src = apcm->srccs[i];
+			src->ops->set_bm(src, 0);
+			src->ops->set_state(src, SRC_STATE_OFF);
+			src->ops->commit_write(src);
+		}
+	}
+
+	apcm->started = 0;
+
+	return 0;
+}
+
+static int
+atc_pcm_playback_position(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src = apcm->src;
+	u32 size, max_cisz;
+	int position;
+
+	if (!src)
+		return 0;
+	position = src->ops->get_ca(src);
+
+	size = apcm->vm_block->size;
+	max_cisz = src->multi * src->rsc.msr;
+	max_cisz = 128 * (max_cisz < 8 ? max_cisz : 8);
+
+	return (position + size - max_cisz - apcm->vm_block->addr) % size;
+}
+
+struct src_node_conf_t {
+	unsigned int pitch;
+	unsigned int msr:8;
+	unsigned int mix_msr:8;
+	unsigned int imp_msr:8;
+	unsigned int vo:1;
+};
+
+static void setup_src_node_conf(struct ct_atc *atc, struct ct_atc_pcm *apcm,
+				struct src_node_conf_t *conf, int *n_srcc)
+{
+	unsigned int pitch;
+
+	/* get pitch and convert to fixed-point 8.24 format. */
+	pitch = atc_get_pitch((atc->rsr * atc->msr),
+				apcm->substream->runtime->rate);
+	*n_srcc = 0;
+
+	if (1 == atc->msr) {
+		*n_srcc = apcm->substream->runtime->channels;
+		conf[0].pitch = pitch;
+		conf[0].mix_msr = conf[0].imp_msr = conf[0].msr = 1;
+		conf[0].vo = 1;
+	} else if (2 == atc->msr) {
+		if (0x8000000 < pitch) {
+			/* Need two-stage SRCs, SRCIMPs and
+			 * AMIXERs for converting format */
+			conf[0].pitch = (atc->msr << 24);
+			conf[0].msr = conf[0].mix_msr = 1;
+			conf[0].imp_msr = atc->msr;
+			conf[0].vo = 0;
+			conf[1].pitch = atc_get_pitch(atc->rsr,
+					apcm->substream->runtime->rate);
+			conf[1].msr = conf[1].mix_msr = conf[1].imp_msr = 1;
+			conf[1].vo = 1;
+			*n_srcc = apcm->substream->runtime->channels * 2;
+		} else if (0x1000000 < pitch) {
+			/* Need one-stage SRCs, SRCIMPs and
+			 * AMIXERs for converting format */
+			conf[0].pitch = pitch;
+			conf[0].msr = conf[0].mix_msr
+				    = conf[0].imp_msr = atc->msr;
+			conf[0].vo = 1;
+			*n_srcc = apcm->substream->runtime->channels;
+		}
+	}
+}
+
+static int
+atc_pcm_capture_get_resources(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	struct srcimp_mgr *srcimp_mgr = atc->rsc_mgrs[SRCIMP];
+	struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER];
+	struct sum_mgr *sum_mgr = atc->rsc_mgrs[SUM];
+	struct src_desc src_dsc = {0};
+	struct src *src;
+	struct srcimp_desc srcimp_dsc = {0};
+	struct srcimp *srcimp;
+	struct amixer_desc mix_dsc = {0};
+	struct sum_desc sum_dsc = {0};
+	unsigned int pitch;
+	int multi, err, i;
+	int n_srcimp, n_amixer, n_srcc, n_sum;
+	struct src_node_conf_t src_node_conf[2] = {{0} };
+
+	/* first release old resources */
+	atc_pcm_release_resources(atc, apcm);
+
+	/* The numbers of converting SRCs and SRCIMPs should be determined
+	 * by pitch value. */
+
+	multi = apcm->substream->runtime->channels;
+
+	/* get pitch and convert to fixed-point 8.24 format. */
+	pitch = atc_get_pitch((atc->rsr * atc->msr),
+				apcm->substream->runtime->rate);
+
+	setup_src_node_conf(atc, apcm, src_node_conf, &n_srcc);
+	n_sum = (1 == multi) ? 1 : 0;
+	n_amixer = n_sum * 2 + n_srcc;
+	n_srcimp = n_srcc;
+	if ((multi > 1) && (0x8000000 >= pitch)) {
+		/* Need extra AMIXERs and SRCIMPs for special treatment
+		 * of interleaved recording of conjugate channels */
+		n_amixer += multi * atc->msr;
+		n_srcimp += multi * atc->msr;
+	} else {
+		n_srcimp += multi;
+	}
+
+	if (n_srcc) {
+		apcm->srccs = kzalloc(sizeof(void *)*n_srcc, GFP_KERNEL);
+		if (NULL == apcm->srccs)
+			return -ENOMEM;
+	}
+	if (n_amixer) {
+		apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
+		if (NULL == apcm->amixers) {
+			err = -ENOMEM;
+			goto error1;
+		}
+	}
+	apcm->srcimps = kzalloc(sizeof(void *)*n_srcimp, GFP_KERNEL);
+	if (NULL == apcm->srcimps) {
+		err = -ENOMEM;
+		goto error1;
+	}
+
+	/* Allocate SRCs for sample rate conversion if needed */
+	src_dsc.multi = 1;
+	src_dsc.mode = ARCRW;
+	for (i = 0, apcm->n_srcc = 0; i < n_srcc; i++) {
+		src_dsc.msr = src_node_conf[i/multi].msr;
+		err = src_mgr->get_src(src_mgr, &src_dsc,
+					(struct src **)&apcm->srccs[i]);
+		if (err)
+			goto error1;
+
+		src = apcm->srccs[i];
+		pitch = src_node_conf[i/multi].pitch;
+		src->ops->set_pitch(src, pitch);
+		src->ops->set_rom(src, select_rom(pitch));
+		src->ops->set_vo(src, src_node_conf[i/multi].vo);
+
+		apcm->n_srcc++;
+	}
+
+	/* Allocate AMIXERs for routing SRCs of conversion if needed */
+	for (i = 0, apcm->n_amixer = 0; i < n_amixer; i++) {
+		if (i < (n_sum*2))
+			mix_dsc.msr = atc->msr;
+		else if (i < (n_sum*2+n_srcc))
+			mix_dsc.msr = src_node_conf[(i-n_sum*2)/multi].mix_msr;
+		else
+			mix_dsc.msr = 1;
+
+		err = amixer_mgr->get_amixer(amixer_mgr, &mix_dsc,
+					(struct amixer **)&apcm->amixers[i]);
+		if (err)
+			goto error1;
+
+		apcm->n_amixer++;
+	}
+
+	/* Allocate a SUM resource to mix all input channels together */
+	sum_dsc.msr = atc->msr;
+	err = sum_mgr->get_sum(sum_mgr, &sum_dsc, (struct sum **)&apcm->mono);
+	if (err)
+		goto error1;
+
+	pitch = atc_get_pitch((atc->rsr * atc->msr),
+				apcm->substream->runtime->rate);
+	/* Allocate SRCIMP resources */
+	for (i = 0, apcm->n_srcimp = 0; i < n_srcimp; i++) {
+		if (i < (n_srcc))
+			srcimp_dsc.msr = src_node_conf[i/multi].imp_msr;
+		else if (1 == multi)
+			srcimp_dsc.msr = (pitch <= 0x8000000) ? atc->msr : 1;
+		else
+			srcimp_dsc.msr = 1;
+
+		err = srcimp_mgr->get_srcimp(srcimp_mgr, &srcimp_dsc, &srcimp);
+		if (err)
+			goto error1;
+
+		apcm->srcimps[i] = srcimp;
+		apcm->n_srcimp++;
+	}
+
+	/* Allocate a SRC for writing data to host memory */
+	src_dsc.multi = apcm->substream->runtime->channels;
+	src_dsc.msr = 1;
+	src_dsc.mode = MEMWR;
+	err = src_mgr->get_src(src_mgr, &src_dsc, (struct src **)&apcm->src);
+	if (err)
+		goto error1;
+
+	src = apcm->src;
+	src->ops->set_pitch(src, pitch);
+
+	/* Set up device virtual mem map */
+	err = ct_map_audio_buffer(atc, apcm);
+	if (err < 0)
+		goto error1;
+
+	return 0;
+
+error1:
+	atc_pcm_release_resources(atc, apcm);
+	return err;
+}
+
+static int atc_pcm_capture_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src;
+	struct amixer *amixer;
+	struct srcimp *srcimp;
+	struct ct_mixer *mixer = atc->mixer;
+	struct sum *mono;
+	struct rsc *out_ports[8] = {NULL};
+	int err, i, j, n_sum, multi;
+	unsigned int pitch;
+	int mix_base = 0, imp_base = 0;
+
+	if (NULL != apcm->src) {
+		/* Prepared pcm capture */
+		return 0;
+	}
+
+	/* Get needed resources. */
+	err = atc_pcm_capture_get_resources(atc, apcm);
+	if (err)
+		return err;
+
+	/* Connect resources */
+	mixer->get_output_ports(mixer, MIX_PCMO_FRONT,
+				&out_ports[0], &out_ports[1]);
+
+	multi = apcm->substream->runtime->channels;
+	if (1 == multi) {
+		mono = apcm->mono;
+		for (i = 0; i < 2; i++) {
+			amixer = apcm->amixers[i];
+			amixer->ops->setup(amixer, out_ports[i],
+						MONO_SUM_SCALE, mono);
+		}
+		out_ports[0] = &mono->rsc;
+		n_sum = 1;
+		mix_base = n_sum * 2;
+	}
+
+	for (i = 0; i < apcm->n_srcc; i++) {
+		src = apcm->srccs[i];
+		srcimp = apcm->srcimps[imp_base+i];
+		amixer = apcm->amixers[mix_base+i];
+		srcimp->ops->map(srcimp, src, out_ports[i%multi]);
+		amixer->ops->setup(amixer, &src->rsc, INIT_VOL, NULL);
+		out_ports[i%multi] = &amixer->rsc;
+	}
+
+	pitch = atc_get_pitch((atc->rsr * atc->msr),
+				apcm->substream->runtime->rate);
+
+	if ((multi > 1) && (pitch <= 0x8000000)) {
+		/* Special connection for interleaved
+		 * recording with conjugate channels */
+		for (i = 0; i < multi; i++) {
+			out_ports[i]->ops->master(out_ports[i]);
+			for (j = 0; j < atc->msr; j++) {
+				amixer = apcm->amixers[apcm->n_srcc+j*multi+i];
+				amixer->ops->set_input(amixer, out_ports[i]);
+				amixer->ops->set_scale(amixer, INIT_VOL);
+				amixer->ops->set_sum(amixer, NULL);
+				amixer->ops->commit_raw_write(amixer);
+				out_ports[i]->ops->next_conj(out_ports[i]);
+
+				srcimp = apcm->srcimps[apcm->n_srcc+j*multi+i];
+				srcimp->ops->map(srcimp, apcm->src,
+							&amixer->rsc);
+			}
+		}
+	} else {
+		for (i = 0; i < multi; i++) {
+			srcimp = apcm->srcimps[apcm->n_srcc+i];
+			srcimp->ops->map(srcimp, apcm->src, out_ports[i]);
+		}
+	}
+
+	ct_timer_prepare(apcm->timer);
+
+	return 0;
+}
+
+static int atc_pcm_capture_start(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src;
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	int i, multi;
+
+	if (apcm->started)
+		return 0;
+
+	apcm->started = 1;
+	multi = apcm->substream->runtime->channels;
+	/* Set up converting SRCs */
+	for (i = 0; i < apcm->n_srcc; i++) {
+		src = apcm->srccs[i];
+		src->ops->set_pm(src, ((i%multi) != (multi-1)));
+		src_mgr->src_disable(src_mgr, src);
+	}
+
+	/*  Set up recording SRC */
+	src = apcm->src;
+	src->ops->set_sf(src, convert_format(apcm->substream->runtime->format));
+	src->ops->set_sa(src, apcm->vm_block->addr);
+	src->ops->set_la(src, apcm->vm_block->addr + apcm->vm_block->size);
+	src->ops->set_ca(src, apcm->vm_block->addr);
+	src_mgr->src_disable(src_mgr, src);
+
+	/* Disable relevant SRCs firstly */
+	src_mgr->commit_write(src_mgr);
+
+	/* Enable SRCs respectively */
+	for (i = 0; i < apcm->n_srcc; i++) {
+		src = apcm->srccs[i];
+		src->ops->set_state(src, SRC_STATE_RUN);
+		src->ops->commit_write(src);
+		src_mgr->src_enable_s(src_mgr, src);
+	}
+	src = apcm->src;
+	src->ops->set_bm(src, 1);
+	src->ops->set_state(src, SRC_STATE_RUN);
+	src->ops->commit_write(src);
+	src_mgr->src_enable_s(src_mgr, src);
+
+	/* Enable relevant SRCs synchronously */
+	src_mgr->commit_write(src_mgr);
+
+	ct_timer_start(apcm->timer);
+	return 0;
+}
+
+static int
+atc_pcm_capture_position(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src = apcm->src;
+
+	if (!src)
+		return 0;
+	return src->ops->get_ca(src) - apcm->vm_block->addr;
+}
+
+static int spdif_passthru_playback_get_resources(struct ct_atc *atc,
+						 struct ct_atc_pcm *apcm)
+{
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER];
+	struct src_desc desc = {0};
+	struct amixer_desc mix_dsc = {0};
+	struct src *src;
+	int err;
+	int n_amixer = apcm->substream->runtime->channels, i;
+	unsigned int pitch, rsr = atc->pll_rate;
+
+	/* first release old resources */
+	atc_pcm_release_resources(atc, apcm);
+
+	/* Get SRC resource */
+	desc.multi = apcm->substream->runtime->channels;
+	desc.msr = 1;
+	while (apcm->substream->runtime->rate > (rsr * desc.msr))
+		desc.msr <<= 1;
+
+	desc.mode = MEMRD;
+	err = src_mgr->get_src(src_mgr, &desc, (struct src **)&apcm->src);
+	if (err)
+		goto error1;
+
+	pitch = atc_get_pitch(apcm->substream->runtime->rate, (rsr * desc.msr));
+	src = apcm->src;
+	src->ops->set_pitch(src, pitch);
+	src->ops->set_rom(src, select_rom(pitch));
+	src->ops->set_sf(src, convert_format(apcm->substream->runtime->format));
+	src->ops->set_pm(src, (src->ops->next_interleave(src) != NULL));
+	src->ops->set_bp(src, 1);
+
+	/* Get AMIXER resource */
+	n_amixer = (n_amixer < 2) ? 2 : n_amixer;
+	apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
+	if (NULL == apcm->amixers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+	mix_dsc.msr = desc.msr;
+	for (i = 0, apcm->n_amixer = 0; i < n_amixer; i++) {
+		err = amixer_mgr->get_amixer(amixer_mgr, &mix_dsc,
+					(struct amixer **)&apcm->amixers[i]);
+		if (err)
+			goto error1;
+
+		apcm->n_amixer++;
+	}
+
+	/* Set up device virtual mem map */
+	err = ct_map_audio_buffer(atc, apcm);
+	if (err < 0)
+		goto error1;
+
+	return 0;
+
+error1:
+	atc_pcm_release_resources(atc, apcm);
+	return err;
+}
+
+static int atc_pll_init(struct ct_atc *atc, int rate)
+{
+	struct hw *hw = atc->hw;
+	int err;
+	err = hw->pll_init(hw, rate);
+	atc->pll_rate = err ? 0 : rate;
+	return err;
+}
+
+static int
+spdif_passthru_playback_setup(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct dao *dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
+	unsigned long flags;
+	unsigned int rate = apcm->substream->runtime->rate;
+	unsigned int status;
+	int err;
+	unsigned char iec958_con_fs;
+
+	switch (rate) {
+	case 48000:
+		iec958_con_fs = IEC958_AES3_CON_FS_48000;
+		break;
+	case 44100:
+		iec958_con_fs = IEC958_AES3_CON_FS_44100;
+		break;
+	case 32000:
+		iec958_con_fs = IEC958_AES3_CON_FS_32000;
+		break;
+	default:
+		return -ENOENT;
+	}
+
+	spin_lock_irqsave(&atc->atc_lock, flags);
+	dao->ops->get_spos(dao, &status);
+	if (((status >> 24) & IEC958_AES3_CON_FS) != iec958_con_fs) {
+		status &= ((~IEC958_AES3_CON_FS) << 24);
+		status |= (iec958_con_fs << 24);
+		dao->ops->set_spos(dao, status);
+		dao->ops->commit_write(dao);
+	}
+	if ((rate != atc->pll_rate) && (32000 != rate))
+		err = atc_pll_init(atc, rate);
+	spin_unlock_irqrestore(&atc->atc_lock, flags);
+
+	return err;
+}
+
+static int
+spdif_passthru_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src;
+	struct amixer *amixer;
+	struct dao *dao;
+	int err;
+	int i;
+	unsigned long flags;
+
+	if (NULL != apcm->src)
+		return 0;
+
+	/* Configure SPDIFOO and PLL to passthrough mode;
+	 * determine pll_rate. */
+	err = spdif_passthru_playback_setup(atc, apcm);
+	if (err)
+		return err;
+
+	/* Get needed resources. */
+	err = spdif_passthru_playback_get_resources(atc, apcm);
+	if (err)
+		return err;
+
+	/* Connect resources */
+	src = apcm->src;
+	for (i = 0; i < apcm->n_amixer; i++) {
+		amixer = apcm->amixers[i];
+		amixer->ops->setup(amixer, &src->rsc, INIT_VOL, NULL);
+		src = src->ops->next_interleave(src);
+		if (NULL == src)
+			src = apcm->src;
+	}
+	/* Connect to SPDIFOO */
+	spin_lock_irqsave(&atc->atc_lock, flags);
+	dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
+	amixer = apcm->amixers[0];
+	dao->ops->set_left_input(dao, &amixer->rsc);
+	amixer = apcm->amixers[1];
+	dao->ops->set_right_input(dao, &amixer->rsc);
+	spin_unlock_irqrestore(&atc->atc_lock, flags);
+
+	ct_timer_prepare(apcm->timer);
+
+	return 0;
+}
+
+static int atc_select_line_in(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+	struct ct_mixer *mixer = atc->mixer;
+	struct src *src;
+
+	if (hw->is_adc_source_selected(hw, ADC_LINEIN))
+		return 0;
+
+	mixer->set_input_left(mixer, MIX_MIC_IN, NULL);
+	mixer->set_input_right(mixer, MIX_MIC_IN, NULL);
+
+	hw->select_adc_source(hw, ADC_LINEIN);
+
+	src = atc->srcs[2];
+	mixer->set_input_left(mixer, MIX_LINE_IN, &src->rsc);
+	src = atc->srcs[3];
+	mixer->set_input_right(mixer, MIX_LINE_IN, &src->rsc);
+
+	return 0;
+}
+
+static int atc_select_mic_in(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+	struct ct_mixer *mixer = atc->mixer;
+	struct src *src;
+
+	if (hw->is_adc_source_selected(hw, ADC_MICIN))
+		return 0;
+
+	mixer->set_input_left(mixer, MIX_LINE_IN, NULL);
+	mixer->set_input_right(mixer, MIX_LINE_IN, NULL);
+
+	hw->select_adc_source(hw, ADC_MICIN);
+
+	src = atc->srcs[2];
+	mixer->set_input_left(mixer, MIX_MIC_IN, &src->rsc);
+	src = atc->srcs[3];
+	mixer->set_input_right(mixer, MIX_MIC_IN, &src->rsc);
+
+	return 0;
+}
+
+static int atc_have_digit_io_switch(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+
+	return hw->have_digit_io_switch(hw);
+}
+
+static int atc_select_digit_io(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+
+	if (hw->is_adc_source_selected(hw, ADC_NONE))
+		return 0;
+
+	hw->select_adc_source(hw, ADC_NONE);
+
+	return 0;
+}
+
+static int atc_daio_unmute(struct ct_atc *atc, unsigned char state, int type)
+{
+	struct daio_mgr *daio_mgr = atc->rsc_mgrs[DAIO];
+
+	if (state)
+		daio_mgr->daio_enable(daio_mgr, atc->daios[type]);
+	else
+		daio_mgr->daio_disable(daio_mgr, atc->daios[type]);
+
+	daio_mgr->commit_write(daio_mgr);
+
+	return 0;
+}
+
+static int
+atc_dao_get_status(struct ct_atc *atc, unsigned int *status, int type)
+{
+	struct dao *dao = container_of(atc->daios[type], struct dao, daio);
+	return dao->ops->get_spos(dao, status);
+}
+
+static int
+atc_dao_set_status(struct ct_atc *atc, unsigned int status, int type)
+{
+	struct dao *dao = container_of(atc->daios[type], struct dao, daio);
+
+	dao->ops->set_spos(dao, status);
+	dao->ops->commit_write(dao);
+	return 0;
+}
+
+static int atc_line_front_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEO1);
+}
+
+static int atc_line_surround_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEO4);
+}
+
+static int atc_line_clfe_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEO3);
+}
+
+static int atc_line_rear_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEO2);
+}
+
+static int atc_line_in_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEIM);
+}
+
+static int atc_spdif_out_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, SPDIFOO);
+}
+
+static int atc_spdif_in_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, SPDIFIO);
+}
+
+static int atc_spdif_out_get_status(struct ct_atc *atc, unsigned int *status)
+{
+	return atc_dao_get_status(atc, status, SPDIFOO);
+}
+
+static int atc_spdif_out_set_status(struct ct_atc *atc, unsigned int status)
+{
+	return atc_dao_set_status(atc, status, SPDIFOO);
+}
+
+static int atc_spdif_out_passthru(struct ct_atc *atc, unsigned char state)
+{
+	unsigned long flags;
+	struct dao_desc da_dsc = {0};
+	struct dao *dao;
+	int err;
+	struct ct_mixer *mixer = atc->mixer;
+	struct rsc *rscs[2] = {NULL};
+	unsigned int spos = 0;
+
+	spin_lock_irqsave(&atc->atc_lock, flags);
+	dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
+	da_dsc.msr = state ? 1 : atc->msr;
+	da_dsc.passthru = state ? 1 : 0;
+	err = dao->ops->reinit(dao, &da_dsc);
+	if (state) {
+		spos = IEC958_DEFAULT_CON;
+	} else {
+		mixer->get_output_ports(mixer, MIX_SPDIF_OUT,
+					&rscs[0], &rscs[1]);
+		dao->ops->set_left_input(dao, rscs[0]);
+		dao->ops->set_right_input(dao, rscs[1]);
+		/* Restore PLL to atc->rsr if needed. */
+		if (atc->pll_rate != atc->rsr)
+			err = atc_pll_init(atc, atc->rsr);
+	}
+	dao->ops->set_spos(dao, spos);
+	dao->ops->commit_write(dao);
+	spin_unlock_irqrestore(&atc->atc_lock, flags);
+
+	return err;
+}
+
+static int ct_atc_destroy(struct ct_atc *atc)
+{
+	struct daio_mgr *daio_mgr;
+	struct dao *dao;
+	struct dai *dai;
+	struct daio *daio;
+	struct sum_mgr *sum_mgr;
+	struct src_mgr *src_mgr;
+	struct srcimp_mgr *srcimp_mgr;
+	struct srcimp *srcimp;
+	struct ct_mixer *mixer;
+	int i = 0;
+
+	if (NULL == atc)
+		return 0;
+
+	if (atc->timer) {
+		ct_timer_free(atc->timer);
+		atc->timer = NULL;
+	}
+
+	/* Stop hardware and disable all interrupts */
+	if (NULL != atc->hw)
+		((struct hw *)atc->hw)->card_stop(atc->hw);
+
+	/* Destroy internal mixer objects */
+	if (NULL != atc->mixer) {
+		mixer = atc->mixer;
+		mixer->set_input_left(mixer, MIX_LINE_IN, NULL);
+		mixer->set_input_right(mixer, MIX_LINE_IN, NULL);
+		mixer->set_input_left(mixer, MIX_MIC_IN, NULL);
+		mixer->set_input_right(mixer, MIX_MIC_IN, NULL);
+		mixer->set_input_left(mixer, MIX_SPDIF_IN, NULL);
+		mixer->set_input_right(mixer, MIX_SPDIF_IN, NULL);
+		ct_mixer_destroy(atc->mixer);
+	}
+
+	if (NULL != atc->daios) {
+		daio_mgr = (struct daio_mgr *)atc->rsc_mgrs[DAIO];
+		for (i = 0; i < atc->n_daio; i++) {
+			daio = atc->daios[i];
+			if (daio->type < LINEIM) {
+				dao = container_of(daio, struct dao, daio);
+				dao->ops->clear_left_input(dao);
+				dao->ops->clear_right_input(dao);
+			} else {
+				dai = container_of(daio, struct dai, daio);
+				/* some thing to do for dai ... */
+			}
+			daio_mgr->put_daio(daio_mgr, daio);
+		}
+		kfree(atc->daios);
+	}
+
+	if (NULL != atc->pcm) {
+		sum_mgr = atc->rsc_mgrs[SUM];
+		for (i = 0; i < atc->n_pcm; i++)
+			sum_mgr->put_sum(sum_mgr, atc->pcm[i]);
+
+		kfree(atc->pcm);
+	}
+
+	if (NULL != atc->srcs) {
+		src_mgr = atc->rsc_mgrs[SRC];
+		for (i = 0; i < atc->n_src; i++)
+			src_mgr->put_src(src_mgr, atc->srcs[i]);
+
+		kfree(atc->srcs);
+	}
+
+	if (NULL != atc->srcimps) {
+		srcimp_mgr = atc->rsc_mgrs[SRCIMP];
+		for (i = 0; i < atc->n_srcimp; i++) {
+			srcimp = atc->srcimps[i];
+			srcimp->ops->unmap(srcimp);
+			srcimp_mgr->put_srcimp(srcimp_mgr, atc->srcimps[i]);
+		}
+		kfree(atc->srcimps);
+	}
+
+	for (i = 0; i < NUM_RSCTYP; i++) {
+		if ((NULL != rsc_mgr_funcs[i].destroy) &&
+		    (NULL != atc->rsc_mgrs[i]))
+			rsc_mgr_funcs[i].destroy(atc->rsc_mgrs[i]);
+
+	}
+
+	if (NULL != atc->hw)
+		destroy_hw_obj((struct hw *)atc->hw);
+
+	/* Destroy device virtual memory manager object */
+	if (NULL != atc->vm) {
+		ct_vm_destroy(atc->vm);
+		atc->vm = NULL;
+	}
+
+	kfree(atc);
+
+	return 0;
+}
+
+static int atc_dev_free(struct snd_device *dev)
+{
+	struct ct_atc *atc = dev->device_data;
+	return ct_atc_destroy(atc);
+}
+
+static int __devinit atc_identify_card(struct ct_atc *atc)
+{
+	const struct snd_pci_quirk *p;
+	const struct snd_pci_quirk *list;
+
+	switch (atc->chip_type) {
+	case ATC20K1:
+		atc->chip_name = "20K1";
+		list = subsys_20k1_list;
+		break;
+	case ATC20K2:
+		atc->chip_name = "20K2";
+		list = subsys_20k2_list;
+		break;
+	default:
+		return -ENOENT;
+	}
+	p = snd_pci_quirk_lookup(atc->pci, list);
+	if (!p)
+		return -ENOENT;
+	atc->model = p->value;
+	atc->model_name = ct_subsys_name[atc->model];
+	snd_printd("ctxfi: chip %s model %s (%04x:%04x) is found\n",
+		   atc->chip_name, atc->model_name,
+		   atc->pci->subsystem_vendor,
+		   atc->pci->subsystem_device);
+	return 0;
+}
+
+int __devinit ct_atc_create_alsa_devs(struct ct_atc *atc)
+{
+	enum CTALSADEVS i;
+	int err;
+
+	alsa_dev_funcs[MIXER].public_name = atc->chip_name;
+
+	for (i = 0; i < NUM_CTALSADEVS; i++) {
+		if (NULL == alsa_dev_funcs[i].create)
+			continue;
+
+		err = alsa_dev_funcs[i].create(atc, i,
+				alsa_dev_funcs[i].public_name);
+		if (err) {
+			printk(KERN_ERR "ctxfi: "
+			       "Creating alsa device %d failed!\n", i);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int __devinit atc_create_hw_devs(struct ct_atc *atc)
+{
+	struct hw *hw;
+	struct card_conf info = {0};
+	int i, err;
+
+	err = create_hw_obj(atc->pci, atc->chip_type, atc->model, &hw);
+	if (err) {
+		printk(KERN_ERR "Failed to create hw obj!!!\n");
+		return err;
+	}
+	atc->hw = hw;
+
+	/* Initialize card hardware. */
+	info.rsr = atc->rsr;
+	info.msr = atc->msr;
+	info.vm_pgt_phys = atc_get_ptp_phys(atc, 0);
+	err = hw->card_init(hw, &info);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < NUM_RSCTYP; i++) {
+		if (NULL == rsc_mgr_funcs[i].create)
+			continue;
+
+		err = rsc_mgr_funcs[i].create(atc->hw, &atc->rsc_mgrs[i]);
+		if (err) {
+			printk(KERN_ERR "ctxfi: "
+			       "Failed to create rsc_mgr %d!!!\n", i);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int __devinit atc_get_resources(struct ct_atc *atc)
+{
+	struct daio_desc da_desc = {0};
+	struct daio_mgr *daio_mgr;
+	struct src_desc src_dsc = {0};
+	struct src_mgr *src_mgr;
+	struct srcimp_desc srcimp_dsc = {0};
+	struct srcimp_mgr *srcimp_mgr;
+	struct sum_desc sum_dsc = {0};
+	struct sum_mgr *sum_mgr;
+	int err, i;
+
+	atc->daios = kzalloc(sizeof(void *)*(DAIONUM), GFP_KERNEL);
+	if (NULL == atc->daios)
+		return -ENOMEM;
+
+	atc->srcs = kzalloc(sizeof(void *)*(2*2), GFP_KERNEL);
+	if (NULL == atc->srcs)
+		return -ENOMEM;
+
+	atc->srcimps = kzalloc(sizeof(void *)*(2*2), GFP_KERNEL);
+	if (NULL == atc->srcimps)
+		return -ENOMEM;
+
+	atc->pcm = kzalloc(sizeof(void *)*(2*4), GFP_KERNEL);
+	if (NULL == atc->pcm)
+		return -ENOMEM;
+
+	daio_mgr = (struct daio_mgr *)atc->rsc_mgrs[DAIO];
+	da_desc.msr = atc->msr;
+	for (i = 0, atc->n_daio = 0; i < DAIONUM-1; i++) {
+		da_desc.type = i;
+		err = daio_mgr->get_daio(daio_mgr, &da_desc,
+					(struct daio **)&atc->daios[i]);
+		if (err) {
+			printk(KERN_ERR "ctxfi: Failed to get DAIO "
+					"resource %d!!!\n", i);
+			return err;
+		}
+		atc->n_daio++;
+	}
+	if (atc->model == CTSB073X)
+		da_desc.type = SPDIFI1;
+	else
+		da_desc.type = SPDIFIO;
+	err = daio_mgr->get_daio(daio_mgr, &da_desc,
+				(struct daio **)&atc->daios[i]);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Failed to get S/PDIF-in resource!!!\n");
+		return err;
+	}
+	atc->n_daio++;
+
+	src_mgr = atc->rsc_mgrs[SRC];
+	src_dsc.multi = 1;
+	src_dsc.msr = atc->msr;
+	src_dsc.mode = ARCRW;
+	for (i = 0, atc->n_src = 0; i < (2*2); i++) {
+		err = src_mgr->get_src(src_mgr, &src_dsc,
+					(struct src **)&atc->srcs[i]);
+		if (err)
+			return err;
+
+		atc->n_src++;
+	}
+
+	srcimp_mgr = atc->rsc_mgrs[SRCIMP];
+	srcimp_dsc.msr = 8; /* SRCIMPs for S/PDIFIn SRT */
+	for (i = 0, atc->n_srcimp = 0; i < (2*1); i++) {
+		err = srcimp_mgr->get_srcimp(srcimp_mgr, &srcimp_dsc,
+					(struct srcimp **)&atc->srcimps[i]);
+		if (err)
+			return err;
+
+		atc->n_srcimp++;
+	}
+	srcimp_dsc.msr = 8; /* SRCIMPs for LINE/MICIn SRT */
+	for (i = 0; i < (2*1); i++) {
+		err = srcimp_mgr->get_srcimp(srcimp_mgr, &srcimp_dsc,
+				(struct srcimp **)&atc->srcimps[2*1+i]);
+		if (err)
+			return err;
+
+		atc->n_srcimp++;
+	}
+
+	sum_mgr = atc->rsc_mgrs[SUM];
+	sum_dsc.msr = atc->msr;
+	for (i = 0, atc->n_pcm = 0; i < (2*4); i++) {
+		err = sum_mgr->get_sum(sum_mgr, &sum_dsc,
+					(struct sum **)&atc->pcm[i]);
+		if (err)
+			return err;
+
+		atc->n_pcm++;
+	}
+
+	err = ct_mixer_create(atc, (struct ct_mixer **)&atc->mixer);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Failed to create mixer obj!!!\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static void __devinit
+atc_connect_dai(struct src_mgr *src_mgr, struct dai *dai,
+		struct src **srcs, struct srcimp **srcimps)
+{
+	struct rsc *rscs[2] = {NULL};
+	struct src *src;
+	struct srcimp *srcimp;
+	int i = 0;
+
+	rscs[0] = &dai->daio.rscl;
+	rscs[1] = &dai->daio.rscr;
+	for (i = 0; i < 2; i++) {
+		src = srcs[i];
+		srcimp = srcimps[i];
+		srcimp->ops->map(srcimp, src, rscs[i]);
+		src_mgr->src_disable(src_mgr, src);
+	}
+
+	src_mgr->commit_write(src_mgr); /* Actually disable SRCs */
+
+	src = srcs[0];
+	src->ops->set_pm(src, 1);
+	for (i = 0; i < 2; i++) {
+		src = srcs[i];
+		src->ops->set_state(src, SRC_STATE_RUN);
+		src->ops->commit_write(src);
+		src_mgr->src_enable_s(src_mgr, src);
+	}
+
+	dai->ops->set_srt_srcl(dai, &(srcs[0]->rsc));
+	dai->ops->set_srt_srcr(dai, &(srcs[1]->rsc));
+
+	dai->ops->set_enb_src(dai, 1);
+	dai->ops->set_enb_srt(dai, 1);
+	dai->ops->commit_write(dai);
+
+	src_mgr->commit_write(src_mgr); /* Synchronously enable SRCs */
+}
+
+static void __devinit atc_connect_resources(struct ct_atc *atc)
+{
+	struct dai *dai;
+	struct dao *dao;
+	struct src *src;
+	struct sum *sum;
+	struct ct_mixer *mixer;
+	struct rsc *rscs[2] = {NULL};
+	int i, j;
+
+	mixer = atc->mixer;
+
+	for (i = MIX_WAVE_FRONT, j = LINEO1; i <= MIX_SPDIF_OUT; i++, j++) {
+		mixer->get_output_ports(mixer, i, &rscs[0], &rscs[1]);
+		dao = container_of(atc->daios[j], struct dao, daio);
+		dao->ops->set_left_input(dao, rscs[0]);
+		dao->ops->set_right_input(dao, rscs[1]);
+	}
+
+	dai = container_of(atc->daios[LINEIM], struct dai, daio);
+	atc_connect_dai(atc->rsc_mgrs[SRC], dai,
+			(struct src **)&atc->srcs[2],
+			(struct srcimp **)&atc->srcimps[2]);
+	src = atc->srcs[2];
+	mixer->set_input_left(mixer, MIX_LINE_IN, &src->rsc);
+	src = atc->srcs[3];
+	mixer->set_input_right(mixer, MIX_LINE_IN, &src->rsc);
+
+	dai = container_of(atc->daios[SPDIFIO], struct dai, daio);
+	atc_connect_dai(atc->rsc_mgrs[SRC], dai,
+			(struct src **)&atc->srcs[0],
+			(struct srcimp **)&atc->srcimps[0]);
+
+	src = atc->srcs[0];
+	mixer->set_input_left(mixer, MIX_SPDIF_IN, &src->rsc);
+	src = atc->srcs[1];
+	mixer->set_input_right(mixer, MIX_SPDIF_IN, &src->rsc);
+
+	for (i = MIX_PCMI_FRONT, j = 0; i <= MIX_PCMI_SURROUND; i++, j += 2) {
+		sum = atc->pcm[j];
+		mixer->set_input_left(mixer, i, &sum->rsc);
+		sum = atc->pcm[j+1];
+		mixer->set_input_right(mixer, i, &sum->rsc);
+	}
+}
+
+static struct ct_atc atc_preset __devinitdata = {
+	.map_audio_buffer = ct_map_audio_buffer,
+	.unmap_audio_buffer = ct_unmap_audio_buffer,
+	.pcm_playback_prepare = atc_pcm_playback_prepare,
+	.pcm_release_resources = atc_pcm_release_resources,
+	.pcm_playback_start = atc_pcm_playback_start,
+	.pcm_playback_stop = atc_pcm_stop,
+	.pcm_playback_position = atc_pcm_playback_position,
+	.pcm_capture_prepare = atc_pcm_capture_prepare,
+	.pcm_capture_start = atc_pcm_capture_start,
+	.pcm_capture_stop = atc_pcm_stop,
+	.pcm_capture_position = atc_pcm_capture_position,
+	.spdif_passthru_playback_prepare = spdif_passthru_playback_prepare,
+	.get_ptp_phys = atc_get_ptp_phys,
+	.select_line_in = atc_select_line_in,
+	.select_mic_in = atc_select_mic_in,
+	.select_digit_io = atc_select_digit_io,
+	.line_front_unmute = atc_line_front_unmute,
+	.line_surround_unmute = atc_line_surround_unmute,
+	.line_clfe_unmute = atc_line_clfe_unmute,
+	.line_rear_unmute = atc_line_rear_unmute,
+	.line_in_unmute = atc_line_in_unmute,
+	.spdif_out_unmute = atc_spdif_out_unmute,
+	.spdif_in_unmute = atc_spdif_in_unmute,
+	.spdif_out_get_status = atc_spdif_out_get_status,
+	.spdif_out_set_status = atc_spdif_out_set_status,
+	.spdif_out_passthru = atc_spdif_out_passthru,
+	.have_digit_io_switch = atc_have_digit_io_switch,
+};
+
+/**
+ *  ct_atc_create - create and initialize a hardware manager
+ *  @card: corresponding alsa card object
+ *  @pci: corresponding kernel pci device object
+ *  @ratc: return created object address in it
+ *
+ *  Creates and initializes a hardware manager.
+ *
+ *  Creates kmallocated ct_atc structure. Initializes hardware.
+ *  Returns 0 if suceeds, or negative error code if fails.
+ */
+
+int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci,
+			    unsigned int rsr, unsigned int msr,
+			    int chip_type, struct ct_atc **ratc)
+{
+	struct ct_atc *atc;
+	static struct snd_device_ops ops = {
+		.dev_free = atc_dev_free,
+	};
+	int err;
+
+	*ratc = NULL;
+
+	atc = kzalloc(sizeof(*atc), GFP_KERNEL);
+	if (NULL == atc)
+		return -ENOMEM;
+
+	/* Set operations */
+	*atc = atc_preset;
+
+	atc->card = card;
+	atc->pci = pci;
+	atc->rsr = rsr;
+	atc->msr = msr;
+	atc->chip_type = chip_type;
+
+	spin_lock_init(&atc->atc_lock);
+
+	/* Find card model */
+	err = atc_identify_card(atc);
+	if (err < 0) {
+		printk(KERN_ERR "ctatc: Card not recognised\n");
+		goto error1;
+	}
+
+	/* Set up device virtual memory management object */
+	err = ct_vm_create(&atc->vm);
+	if (err < 0)
+		goto error1;
+
+	/* Create all atc hw devices */
+	err = atc_create_hw_devs(atc);
+	if (err < 0)
+		goto error1;
+
+	/* Get resources */
+	err = atc_get_resources(atc);
+	if (err < 0)
+		goto error1;
+
+	/* Build topology */
+	atc_connect_resources(atc);
+
+	atc->timer = ct_timer_new(atc);
+	if (!atc->timer)
+		goto error1;
+
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, atc, &ops);
+	if (err < 0)
+		goto error1;
+
+	snd_card_set_dev(card, &pci->dev);
+
+	*ratc = atc;
+	return 0;
+
+error1:
+	ct_atc_destroy(atc);
+	printk(KERN_ERR "ctxfi: Something wrong!!!\n");
+	return err;
+}
diff --git a/sound/pci/ctxfi/ctatc.h b/sound/pci/ctxfi/ctatc.h
new file mode 100644
index 0000000..a033472
--- /dev/null
+++ b/sound/pci/ctxfi/ctatc.h
@@ -0,0 +1,147 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctatc.h
+ *
+ * @Brief
+ * This file contains the definition of the device resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	Mar 28 2008
+ *
+ */
+
+#ifndef CTATC_H
+#define CTATC_H
+
+#include <linux/types.h>
+#include <linux/spinlock_types.h>
+#include <linux/pci.h>
+#include <linux/timer.h>
+#include <sound/core.h>
+
+#include "ctvmem.h"
+#include "ctresource.h"
+
+enum CTALSADEVS {		/* Types of alsa devices */
+	FRONT,
+	SURROUND,
+	CLFE,
+	SIDE,
+	IEC958,
+	MIXER,
+	NUM_CTALSADEVS		/* This should always be the last */
+};
+
+struct ct_atc_chip_sub_details {
+	u16 subsys;
+	const char *nm_model;
+};
+
+struct ct_atc_chip_details {
+	u16 vendor;
+	u16 device;
+	const struct ct_atc_chip_sub_details *sub_details;
+	const char *nm_card;
+};
+
+struct ct_atc;
+struct ct_timer;
+struct ct_timer_instance;
+
+/* alsa pcm stream descriptor */
+struct ct_atc_pcm {
+	struct snd_pcm_substream *substream;
+	void (*interrupt)(struct ct_atc_pcm *apcm);
+	struct ct_timer_instance *timer;
+	unsigned int started:1;
+
+	/* Only mono and interleaved modes are supported now. */
+	struct ct_vm_block *vm_block;
+	void *src;		/* SRC for interacting with host memory */
+	void **srccs;		/* SRCs for sample rate conversion */
+	void **srcimps;		/* SRC Input Mappers */
+	void **amixers;		/* AMIXERs for routing converted data */
+	void *mono;		/* A SUM resource for mixing chs to one */
+	unsigned char n_srcc;	/* Number of converting SRCs */
+	unsigned char n_srcimp;	/* Number of SRC Input Mappers */
+	unsigned char n_amixer;	/* Number of AMIXERs */
+};
+
+/* Chip resource management object */
+struct ct_atc {
+	struct pci_dev *pci;
+	struct snd_card *card;
+	unsigned int rsr; /* reference sample rate in Hz */
+	unsigned int msr; /* master sample rate in rsr */
+	unsigned int pll_rate; /* current rate of Phase Lock Loop */
+
+	int chip_type;
+	int model;
+	const char *chip_name;
+	const char *model_name;
+
+	struct ct_vm *vm; /* device virtual memory manager for this card */
+	int (*map_audio_buffer)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	void (*unmap_audio_buffer)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	unsigned long (*get_ptp_phys)(struct ct_atc *atc, int index);
+
+	spinlock_t atc_lock;
+
+	int (*pcm_playback_prepare)(struct ct_atc *atc,
+				    struct ct_atc_pcm *apcm);
+	int (*pcm_playback_start)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_playback_stop)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_playback_position)(struct ct_atc *atc,
+				     struct ct_atc_pcm *apcm);
+	int (*spdif_passthru_playback_prepare)(struct ct_atc *atc,
+					       struct ct_atc_pcm *apcm);
+	int (*pcm_capture_prepare)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_capture_start)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_capture_stop)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_capture_position)(struct ct_atc *atc,
+				    struct ct_atc_pcm *apcm);
+	int (*pcm_release_resources)(struct ct_atc *atc,
+				     struct ct_atc_pcm *apcm);
+	int (*select_line_in)(struct ct_atc *atc);
+	int (*select_mic_in)(struct ct_atc *atc);
+	int (*select_digit_io)(struct ct_atc *atc);
+	int (*line_front_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*line_surround_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*line_clfe_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*line_rear_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*line_in_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*spdif_out_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*spdif_in_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*spdif_out_get_status)(struct ct_atc *atc, unsigned int *status);
+	int (*spdif_out_set_status)(struct ct_atc *atc, unsigned int status);
+	int (*spdif_out_passthru)(struct ct_atc *atc, unsigned char state);
+	int (*have_digit_io_switch)(struct ct_atc *atc);
+
+	/* Don't touch! Used for internal object. */
+	void *rsc_mgrs[NUM_RSCTYP]; /* chip resource managers */
+	void *mixer;		/* internal mixer object */
+	void *hw;		/* chip specific hardware access object */
+	void **daios;		/* digital audio io resources */
+	void **pcm;		/* SUMs for collecting all pcm stream */
+	void **srcs;		/* Sample Rate Converters for input signal */
+	void **srcimps;		/* input mappers for SRCs */
+	unsigned char n_daio;
+	unsigned char n_src;
+	unsigned char n_srcimp;
+	unsigned char n_pcm;
+
+	struct ct_timer *timer;
+};
+
+
+int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci,
+			    unsigned int rsr, unsigned int msr, int chip_type,
+			    struct ct_atc **ratc);
+int __devinit ct_atc_create_alsa_devs(struct ct_atc *atc);
+
+#endif /* CTATC_H */
diff --git a/sound/pci/ctxfi/ctdaio.c b/sound/pci/ctxfi/ctdaio.c
new file mode 100644
index 0000000..082e35c
--- /dev/null
+++ b/sound/pci/ctxfi/ctdaio.c
@@ -0,0 +1,769 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctdaio.c
+ *
+ * @Brief
+ * This file contains the implementation of Digital Audio Input Output
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 23 2008
+ *
+ */
+
+#include "ctdaio.h"
+#include "cthardware.h"
+#include "ctimap.h"
+#include <linux/slab.h>
+#include <linux/kernel.h>
+
+#define DAIO_RESOURCE_NUM	NUM_DAIOTYP
+#define DAIO_OUT_MAX		SPDIFOO
+
+union daio_usage {
+	struct {
+		unsigned short lineo1:1;
+		unsigned short lineo2:1;
+		unsigned short lineo3:1;
+		unsigned short lineo4:1;
+		unsigned short spdifoo:1;
+		unsigned short lineim:1;
+		unsigned short spdifio:1;
+		unsigned short spdifi1:1;
+	} bf;
+	unsigned short data;
+};
+
+struct daio_rsc_idx {
+	unsigned short left;
+	unsigned short right;
+};
+
+struct daio_rsc_idx idx_20k1[NUM_DAIOTYP] = {
+	[LINEO1] = {.left = 0x00, .right = 0x01},
+	[LINEO2] = {.left = 0x18, .right = 0x19},
+	[LINEO3] = {.left = 0x08, .right = 0x09},
+	[LINEO4] = {.left = 0x10, .right = 0x11},
+	[LINEIM] = {.left = 0x1b5, .right = 0x1bd},
+	[SPDIFOO] = {.left = 0x20, .right = 0x21},
+	[SPDIFIO] = {.left = 0x15, .right = 0x1d},
+	[SPDIFI1] = {.left = 0x95, .right = 0x9d},
+};
+
+struct daio_rsc_idx idx_20k2[NUM_DAIOTYP] = {
+	[LINEO1] = {.left = 0x40, .right = 0x41},
+	[LINEO2] = {.left = 0x70, .right = 0x71},
+	[LINEO3] = {.left = 0x50, .right = 0x51},
+	[LINEO4] = {.left = 0x60, .right = 0x61},
+	[LINEIM] = {.left = 0x45, .right = 0xc5},
+	[SPDIFOO] = {.left = 0x00, .right = 0x01},
+	[SPDIFIO] = {.left = 0x05, .right = 0x85},
+};
+
+static int daio_master(struct rsc *rsc)
+{
+	/* Actually, this is not the resource index of DAIO.
+	 * For DAO, it is the input mapper index. And, for DAI,
+	 * it is the output time-slot index. */
+	return rsc->conj = rsc->idx;
+}
+
+static int daio_index(const struct rsc *rsc)
+{
+	return rsc->conj;
+}
+
+static int daio_out_next_conj(struct rsc *rsc)
+{
+	return rsc->conj += 2;
+}
+
+static int daio_in_next_conj_20k1(struct rsc *rsc)
+{
+	return rsc->conj += 0x200;
+}
+
+static int daio_in_next_conj_20k2(struct rsc *rsc)
+{
+	return rsc->conj += 0x100;
+}
+
+static struct rsc_ops daio_out_rsc_ops = {
+	.master		= daio_master,
+	.next_conj	= daio_out_next_conj,
+	.index		= daio_index,
+	.output_slot	= NULL,
+};
+
+static struct rsc_ops daio_in_rsc_ops_20k1 = {
+	.master		= daio_master,
+	.next_conj	= daio_in_next_conj_20k1,
+	.index		= NULL,
+	.output_slot	= daio_index,
+};
+
+static struct rsc_ops daio_in_rsc_ops_20k2 = {
+	.master		= daio_master,
+	.next_conj	= daio_in_next_conj_20k2,
+	.index		= NULL,
+	.output_slot	= daio_index,
+};
+
+static unsigned int daio_device_index(enum DAIOTYP type, struct hw *hw)
+{
+	switch (hw->chip_type) {
+	case ATC20K1:
+		switch (type) {
+		case SPDIFOO:	return 0;
+		case SPDIFIO:	return 0;
+		case SPDIFI1:	return 1;
+		case LINEO1:	return 4;
+		case LINEO2:	return 7;
+		case LINEO3:	return 5;
+		case LINEO4:	return 6;
+		case LINEIM:	return 7;
+		default:	return -EINVAL;
+		}
+	case ATC20K2:
+		switch (type) {
+		case SPDIFOO:	return 0;
+		case SPDIFIO:	return 0;
+		case LINEO1:	return 4;
+		case LINEO2:	return 7;
+		case LINEO3:	return 5;
+		case LINEO4:	return 6;
+		case LINEIM:	return 4;
+		default:	return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int dao_rsc_reinit(struct dao *dao, const struct dao_desc *desc);
+
+static int dao_spdif_get_spos(struct dao *dao, unsigned int *spos)
+{
+	((struct hw *)dao->hw)->dao_get_spos(dao->ctrl_blk, spos);
+	return 0;
+}
+
+static int dao_spdif_set_spos(struct dao *dao, unsigned int spos)
+{
+	((struct hw *)dao->hw)->dao_set_spos(dao->ctrl_blk, spos);
+	return 0;
+}
+
+static int dao_commit_write(struct dao *dao)
+{
+	((struct hw *)dao->hw)->dao_commit_write(dao->hw,
+		daio_device_index(dao->daio.type, dao->hw), dao->ctrl_blk);
+	return 0;
+}
+
+static int dao_set_left_input(struct dao *dao, struct rsc *input)
+{
+	struct imapper *entry;
+	struct daio *daio = &dao->daio;
+	int i;
+
+	entry = kzalloc((sizeof(*entry) * daio->rscl.msr), GFP_KERNEL);
+	if (NULL == entry)
+		return -ENOMEM;
+
+	/* Program master and conjugate resources */
+	input->ops->master(input);
+	daio->rscl.ops->master(&daio->rscl);
+	for (i = 0; i < daio->rscl.msr; i++, entry++) {
+		entry->slot = input->ops->output_slot(input);
+		entry->user = entry->addr = daio->rscl.ops->index(&daio->rscl);
+		dao->mgr->imap_add(dao->mgr, entry);
+		dao->imappers[i] = entry;
+
+		input->ops->next_conj(input);
+		daio->rscl.ops->next_conj(&daio->rscl);
+	}
+	input->ops->master(input);
+	daio->rscl.ops->master(&daio->rscl);
+
+	return 0;
+}
+
+static int dao_set_right_input(struct dao *dao, struct rsc *input)
+{
+	struct imapper *entry;
+	struct daio *daio = &dao->daio;
+	int i;
+
+	entry = kzalloc((sizeof(*entry) * daio->rscr.msr), GFP_KERNEL);
+	if (NULL == entry)
+		return -ENOMEM;
+
+	/* Program master and conjugate resources */
+	input->ops->master(input);
+	daio->rscr.ops->master(&daio->rscr);
+	for (i = 0; i < daio->rscr.msr; i++, entry++) {
+		entry->slot = input->ops->output_slot(input);
+		entry->user = entry->addr = daio->rscr.ops->index(&daio->rscr);
+		dao->mgr->imap_add(dao->mgr, entry);
+		dao->imappers[daio->rscl.msr + i] = entry;
+
+		input->ops->next_conj(input);
+		daio->rscr.ops->next_conj(&daio->rscr);
+	}
+	input->ops->master(input);
+	daio->rscr.ops->master(&daio->rscr);
+
+	return 0;
+}
+
+static int dao_clear_left_input(struct dao *dao)
+{
+	struct imapper *entry;
+	struct daio *daio = &dao->daio;
+	int i;
+
+	if (NULL == dao->imappers[0])
+		return 0;
+
+	entry = dao->imappers[0];
+	dao->mgr->imap_delete(dao->mgr, entry);
+	/* Program conjugate resources */
+	for (i = 1; i < daio->rscl.msr; i++) {
+		entry = dao->imappers[i];
+		dao->mgr->imap_delete(dao->mgr, entry);
+		dao->imappers[i] = NULL;
+	}
+
+	kfree(dao->imappers[0]);
+	dao->imappers[0] = NULL;
+
+	return 0;
+}
+
+static int dao_clear_right_input(struct dao *dao)
+{
+	struct imapper *entry;
+	struct daio *daio = &dao->daio;
+	int i;
+
+	if (NULL == dao->imappers[daio->rscl.msr])
+		return 0;
+
+	entry = dao->imappers[daio->rscl.msr];
+	dao->mgr->imap_delete(dao->mgr, entry);
+	/* Program conjugate resources */
+	for (i = 1; i < daio->rscr.msr; i++) {
+		entry = dao->imappers[daio->rscl.msr + i];
+		dao->mgr->imap_delete(dao->mgr, entry);
+		dao->imappers[daio->rscl.msr + i] = NULL;
+	}
+
+	kfree(dao->imappers[daio->rscl.msr]);
+	dao->imappers[daio->rscl.msr] = NULL;
+
+	return 0;
+}
+
+static struct dao_rsc_ops dao_ops = {
+	.set_spos		= dao_spdif_set_spos,
+	.commit_write		= dao_commit_write,
+	.get_spos		= dao_spdif_get_spos,
+	.reinit			= dao_rsc_reinit,
+	.set_left_input		= dao_set_left_input,
+	.set_right_input	= dao_set_right_input,
+	.clear_left_input	= dao_clear_left_input,
+	.clear_right_input	= dao_clear_right_input,
+};
+
+static int dai_set_srt_srcl(struct dai *dai, struct rsc *src)
+{
+	src->ops->master(src);
+	((struct hw *)dai->hw)->dai_srt_set_srcm(dai->ctrl_blk,
+						src->ops->index(src));
+	return 0;
+}
+
+static int dai_set_srt_srcr(struct dai *dai, struct rsc *src)
+{
+	src->ops->master(src);
+	((struct hw *)dai->hw)->dai_srt_set_srco(dai->ctrl_blk,
+						src->ops->index(src));
+	return 0;
+}
+
+static int dai_set_srt_msr(struct dai *dai, unsigned int msr)
+{
+	unsigned int rsr;
+
+	for (rsr = 0; msr > 1; msr >>= 1)
+		rsr++;
+
+	((struct hw *)dai->hw)->dai_srt_set_rsr(dai->ctrl_blk, rsr);
+	return 0;
+}
+
+static int dai_set_enb_src(struct dai *dai, unsigned int enb)
+{
+	((struct hw *)dai->hw)->dai_srt_set_ec(dai->ctrl_blk, enb);
+	return 0;
+}
+
+static int dai_set_enb_srt(struct dai *dai, unsigned int enb)
+{
+	((struct hw *)dai->hw)->dai_srt_set_et(dai->ctrl_blk, enb);
+	return 0;
+}
+
+static int dai_commit_write(struct dai *dai)
+{
+	((struct hw *)dai->hw)->dai_commit_write(dai->hw,
+		daio_device_index(dai->daio.type, dai->hw), dai->ctrl_blk);
+	return 0;
+}
+
+static struct dai_rsc_ops dai_ops = {
+	.set_srt_srcl		= dai_set_srt_srcl,
+	.set_srt_srcr		= dai_set_srt_srcr,
+	.set_srt_msr		= dai_set_srt_msr,
+	.set_enb_src		= dai_set_enb_src,
+	.set_enb_srt		= dai_set_enb_srt,
+	.commit_write		= dai_commit_write,
+};
+
+static int daio_rsc_init(struct daio *daio,
+			 const struct daio_desc *desc,
+			 void *hw)
+{
+	int err;
+	unsigned int idx_l, idx_r;
+
+	switch (((struct hw *)hw)->chip_type) {
+	case ATC20K1:
+		idx_l = idx_20k1[desc->type].left;
+		idx_r = idx_20k1[desc->type].right;
+		break;
+	case ATC20K2:
+		idx_l = idx_20k2[desc->type].left;
+		idx_r = idx_20k2[desc->type].right;
+		break;
+	default:
+		return -EINVAL;
+	}
+	err = rsc_init(&daio->rscl, idx_l, DAIO, desc->msr, hw);
+	if (err)
+		return err;
+
+	err = rsc_init(&daio->rscr, idx_r, DAIO, desc->msr, hw);
+	if (err)
+		goto error1;
+
+	/* Set daio->rscl/r->ops to daio specific ones */
+	if (desc->type <= DAIO_OUT_MAX) {
+		daio->rscl.ops = daio->rscr.ops = &daio_out_rsc_ops;
+	} else {
+		switch (((struct hw *)hw)->chip_type) {
+		case ATC20K1:
+			daio->rscl.ops = daio->rscr.ops = &daio_in_rsc_ops_20k1;
+			break;
+		case ATC20K2:
+			daio->rscl.ops = daio->rscr.ops = &daio_in_rsc_ops_20k2;
+			break;
+		default:
+			break;
+		}
+	}
+	daio->type = desc->type;
+
+	return 0;
+
+error1:
+	rsc_uninit(&daio->rscl);
+	return err;
+}
+
+static int daio_rsc_uninit(struct daio *daio)
+{
+	rsc_uninit(&daio->rscl);
+	rsc_uninit(&daio->rscr);
+
+	return 0;
+}
+
+static int dao_rsc_init(struct dao *dao,
+			const struct daio_desc *desc,
+			struct daio_mgr *mgr)
+{
+	struct hw *hw = mgr->mgr.hw;
+	unsigned int conf;
+	int err;
+
+	err = daio_rsc_init(&dao->daio, desc, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	dao->imappers = kzalloc(sizeof(void *)*desc->msr*2, GFP_KERNEL);
+	if (NULL == dao->imappers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+	dao->ops = &dao_ops;
+	dao->mgr = mgr;
+	dao->hw = hw;
+	err = hw->dao_get_ctrl_blk(&dao->ctrl_blk);
+	if (err)
+		goto error2;
+
+	hw->daio_mgr_dsb_dao(mgr->mgr.ctrl_blk,
+			daio_device_index(dao->daio.type, hw));
+	hw->daio_mgr_commit_write(hw, mgr->mgr.ctrl_blk);
+
+	conf = (desc->msr & 0x7) | (desc->passthru << 3);
+	hw->daio_mgr_dao_init(mgr->mgr.ctrl_blk,
+			daio_device_index(dao->daio.type, hw), conf);
+	hw->daio_mgr_enb_dao(mgr->mgr.ctrl_blk,
+			daio_device_index(dao->daio.type, hw));
+	hw->daio_mgr_commit_write(hw, mgr->mgr.ctrl_blk);
+
+	return 0;
+
+error2:
+	kfree(dao->imappers);
+	dao->imappers = NULL;
+error1:
+	daio_rsc_uninit(&dao->daio);
+	return err;
+}
+
+static int dao_rsc_uninit(struct dao *dao)
+{
+	if (NULL != dao->imappers) {
+		if (NULL != dao->imappers[0])
+			dao_clear_left_input(dao);
+
+		if (NULL != dao->imappers[dao->daio.rscl.msr])
+			dao_clear_right_input(dao);
+
+		kfree(dao->imappers);
+		dao->imappers = NULL;
+	}
+	((struct hw *)dao->hw)->dao_put_ctrl_blk(dao->ctrl_blk);
+	dao->hw = dao->ctrl_blk = NULL;
+	daio_rsc_uninit(&dao->daio);
+
+	return 0;
+}
+
+static int dao_rsc_reinit(struct dao *dao, const struct dao_desc *desc)
+{
+	struct daio_mgr *mgr = dao->mgr;
+	struct daio_desc dsc = {0};
+
+	dsc.type = dao->daio.type;
+	dsc.msr = desc->msr;
+	dsc.passthru = desc->passthru;
+	dao_rsc_uninit(dao);
+	return dao_rsc_init(dao, &dsc, mgr);
+}
+
+static int dai_rsc_init(struct dai *dai,
+			const struct daio_desc *desc,
+			struct daio_mgr *mgr)
+{
+	int err;
+	struct hw *hw = mgr->mgr.hw;
+	unsigned int rsr, msr;
+
+	err = daio_rsc_init(&dai->daio, desc, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	dai->ops = &dai_ops;
+	dai->hw = mgr->mgr.hw;
+	err = hw->dai_get_ctrl_blk(&dai->ctrl_blk);
+	if (err)
+		goto error1;
+
+	for (rsr = 0, msr = desc->msr; msr > 1; msr >>= 1)
+		rsr++;
+
+	hw->dai_srt_set_rsr(dai->ctrl_blk, rsr);
+	hw->dai_srt_set_drat(dai->ctrl_blk, 0);
+	/* default to disabling control of a SRC */
+	hw->dai_srt_set_ec(dai->ctrl_blk, 0);
+	hw->dai_srt_set_et(dai->ctrl_blk, 0); /* default to disabling SRT */
+	hw->dai_commit_write(hw,
+		daio_device_index(dai->daio.type, dai->hw), dai->ctrl_blk);
+
+	return 0;
+
+error1:
+	daio_rsc_uninit(&dai->daio);
+	return err;
+}
+
+static int dai_rsc_uninit(struct dai *dai)
+{
+	((struct hw *)dai->hw)->dai_put_ctrl_blk(dai->ctrl_blk);
+	dai->hw = dai->ctrl_blk = NULL;
+	daio_rsc_uninit(&dai->daio);
+	return 0;
+}
+
+static int daio_mgr_get_rsc(struct rsc_mgr *mgr, enum DAIOTYP type)
+{
+	if (((union daio_usage *)mgr->rscs)->data & (0x1 << type))
+		return -ENOENT;
+
+	((union daio_usage *)mgr->rscs)->data |= (0x1 << type);
+
+	return 0;
+}
+
+static int daio_mgr_put_rsc(struct rsc_mgr *mgr, enum DAIOTYP type)
+{
+	((union daio_usage *)mgr->rscs)->data &= ~(0x1 << type);
+
+	return 0;
+}
+
+static int get_daio_rsc(struct daio_mgr *mgr,
+			const struct daio_desc *desc,
+			struct daio **rdaio)
+{
+	int err;
+	struct dai *dai = NULL;
+	struct dao *dao = NULL;
+	unsigned long flags;
+
+	*rdaio = NULL;
+
+	/* Check whether there are sufficient daio resources to meet request. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	err = daio_mgr_get_rsc(&mgr->mgr, desc->type);
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "Can't meet DAIO resource request!\n");
+		return err;
+	}
+
+	/* Allocate mem for daio resource */
+	if (desc->type <= DAIO_OUT_MAX) {
+		dao = kzalloc(sizeof(*dao), GFP_KERNEL);
+		if (NULL == dao) {
+			err = -ENOMEM;
+			goto error;
+		}
+		err = dao_rsc_init(dao, desc, mgr);
+		if (err)
+			goto error;
+
+		*rdaio = &dao->daio;
+	} else {
+		dai = kzalloc(sizeof(*dai), GFP_KERNEL);
+		if (NULL == dai) {
+			err = -ENOMEM;
+			goto error;
+		}
+		err = dai_rsc_init(dai, desc, mgr);
+		if (err)
+			goto error;
+
+		*rdaio = &dai->daio;
+	}
+
+	mgr->daio_enable(mgr, *rdaio);
+	mgr->commit_write(mgr);
+
+	return 0;
+
+error:
+	if (NULL != dao)
+		kfree(dao);
+	else if (NULL != dai)
+		kfree(dai);
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	daio_mgr_put_rsc(&mgr->mgr, desc->type);
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	return err;
+}
+
+static int put_daio_rsc(struct daio_mgr *mgr, struct daio *daio)
+{
+	unsigned long flags;
+
+	mgr->daio_disable(mgr, daio);
+	mgr->commit_write(mgr);
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	daio_mgr_put_rsc(&mgr->mgr, daio->type);
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+
+	if (daio->type <= DAIO_OUT_MAX) {
+		dao_rsc_uninit(container_of(daio, struct dao, daio));
+		kfree(container_of(daio, struct dao, daio));
+	} else {
+		dai_rsc_uninit(container_of(daio, struct dai, daio));
+		kfree(container_of(daio, struct dai, daio));
+	}
+
+	return 0;
+}
+
+static int daio_mgr_enb_daio(struct daio_mgr *mgr, struct daio *daio)
+{
+	struct hw *hw = mgr->mgr.hw;
+
+	if (DAIO_OUT_MAX >= daio->type) {
+		hw->daio_mgr_enb_dao(mgr->mgr.ctrl_blk,
+				daio_device_index(daio->type, hw));
+	} else {
+		hw->daio_mgr_enb_dai(mgr->mgr.ctrl_blk,
+				daio_device_index(daio->type, hw));
+	}
+	return 0;
+}
+
+static int daio_mgr_dsb_daio(struct daio_mgr *mgr, struct daio *daio)
+{
+	struct hw *hw = mgr->mgr.hw;
+
+	if (DAIO_OUT_MAX >= daio->type) {
+		hw->daio_mgr_dsb_dao(mgr->mgr.ctrl_blk,
+				daio_device_index(daio->type, hw));
+	} else {
+		hw->daio_mgr_dsb_dai(mgr->mgr.ctrl_blk,
+				daio_device_index(daio->type, hw));
+	}
+	return 0;
+}
+
+static int daio_map_op(void *data, struct imapper *entry)
+{
+	struct rsc_mgr *mgr = &((struct daio_mgr *)data)->mgr;
+	struct hw *hw = mgr->hw;
+
+	hw->daio_mgr_set_imaparc(mgr->ctrl_blk, entry->slot);
+	hw->daio_mgr_set_imapnxt(mgr->ctrl_blk, entry->next);
+	hw->daio_mgr_set_imapaddr(mgr->ctrl_blk, entry->addr);
+	hw->daio_mgr_commit_write(mgr->hw, mgr->ctrl_blk);
+
+	return 0;
+}
+
+static int daio_imap_add(struct daio_mgr *mgr, struct imapper *entry)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&mgr->imap_lock, flags);
+	if ((0 == entry->addr) && (mgr->init_imap_added)) {
+		input_mapper_delete(&mgr->imappers, mgr->init_imap,
+							daio_map_op, mgr);
+		mgr->init_imap_added = 0;
+	}
+	err = input_mapper_add(&mgr->imappers, entry, daio_map_op, mgr);
+	spin_unlock_irqrestore(&mgr->imap_lock, flags);
+
+	return err;
+}
+
+static int daio_imap_delete(struct daio_mgr *mgr, struct imapper *entry)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&mgr->imap_lock, flags);
+	err = input_mapper_delete(&mgr->imappers, entry, daio_map_op, mgr);
+	if (list_empty(&mgr->imappers)) {
+		input_mapper_add(&mgr->imappers, mgr->init_imap,
+							daio_map_op, mgr);
+		mgr->init_imap_added = 1;
+	}
+	spin_unlock_irqrestore(&mgr->imap_lock, flags);
+
+	return err;
+}
+
+static int daio_mgr_commit_write(struct daio_mgr *mgr)
+{
+	struct hw *hw = mgr->mgr.hw;
+
+	hw->daio_mgr_commit_write(hw, mgr->mgr.ctrl_blk);
+	return 0;
+}
+
+int daio_mgr_create(void *hw, struct daio_mgr **rdaio_mgr)
+{
+	int err, i;
+	struct daio_mgr *daio_mgr;
+	struct imapper *entry;
+
+	*rdaio_mgr = NULL;
+	daio_mgr = kzalloc(sizeof(*daio_mgr), GFP_KERNEL);
+	if (NULL == daio_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&daio_mgr->mgr, DAIO, DAIO_RESOURCE_NUM, hw);
+	if (err)
+		goto error1;
+
+	spin_lock_init(&daio_mgr->mgr_lock);
+	spin_lock_init(&daio_mgr->imap_lock);
+	INIT_LIST_HEAD(&daio_mgr->imappers);
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (NULL == entry) {
+		err = -ENOMEM;
+		goto error2;
+	}
+	entry->slot = entry->addr = entry->next = entry->user = 0;
+	list_add(&entry->list, &daio_mgr->imappers);
+	daio_mgr->init_imap = entry;
+	daio_mgr->init_imap_added = 1;
+
+	daio_mgr->get_daio = get_daio_rsc;
+	daio_mgr->put_daio = put_daio_rsc;
+	daio_mgr->daio_enable = daio_mgr_enb_daio;
+	daio_mgr->daio_disable = daio_mgr_dsb_daio;
+	daio_mgr->imap_add = daio_imap_add;
+	daio_mgr->imap_delete = daio_imap_delete;
+	daio_mgr->commit_write = daio_mgr_commit_write;
+
+	for (i = 0; i < 8; i++) {
+		((struct hw *)hw)->daio_mgr_dsb_dao(daio_mgr->mgr.ctrl_blk, i);
+		((struct hw *)hw)->daio_mgr_dsb_dai(daio_mgr->mgr.ctrl_blk, i);
+	}
+	((struct hw *)hw)->daio_mgr_commit_write(hw, daio_mgr->mgr.ctrl_blk);
+
+	*rdaio_mgr = daio_mgr;
+
+	return 0;
+
+error2:
+	rsc_mgr_uninit(&daio_mgr->mgr);
+error1:
+	kfree(daio_mgr);
+	return err;
+}
+
+int daio_mgr_destroy(struct daio_mgr *daio_mgr)
+{
+	unsigned long flags;
+
+	/* free daio input mapper list */
+	spin_lock_irqsave(&daio_mgr->imap_lock, flags);
+	free_input_mapper_list(&daio_mgr->imappers);
+	spin_unlock_irqrestore(&daio_mgr->imap_lock, flags);
+
+	rsc_mgr_uninit(&daio_mgr->mgr);
+	kfree(daio_mgr);
+
+	return 0;
+}
+
diff --git a/sound/pci/ctxfi/ctdaio.h b/sound/pci/ctxfi/ctdaio.h
new file mode 100644
index 0000000..0f52ce5
--- /dev/null
+++ b/sound/pci/ctxfi/ctdaio.h
@@ -0,0 +1,122 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctdaio.h
+ *
+ * @Brief
+ * This file contains the definition of Digital Audio Input Output
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 23 2008
+ *
+ */
+
+#ifndef CTDAIO_H
+#define CTDAIO_H
+
+#include "ctresource.h"
+#include "ctimap.h"
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+/* Define the descriptor of a daio resource */
+enum DAIOTYP {
+	LINEO1,
+	LINEO2,
+	LINEO3,
+	LINEO4,
+	SPDIFOO,	/* S/PDIF Out (Flexijack/Optical) */
+	LINEIM,
+	SPDIFIO,	/* S/PDIF In (Flexijack/Optical) on the card */
+	SPDIFI1,	/* S/PDIF In on internal Drive Bay */
+	NUM_DAIOTYP
+};
+
+struct dao_rsc_ops;
+struct dai_rsc_ops;
+struct daio_mgr;
+
+struct daio {
+	struct rsc rscl;	/* Basic resource info for left TX/RX */
+	struct rsc rscr;	/* Basic resource info for right TX/RX */
+	enum DAIOTYP type;
+};
+
+struct dao {
+	struct daio daio;
+	struct dao_rsc_ops *ops;	/* DAO specific operations */
+	struct imapper **imappers;
+	struct daio_mgr *mgr;
+	void *hw;
+	void *ctrl_blk;
+};
+
+struct dai {
+	struct daio daio;
+	struct dai_rsc_ops *ops;	/* DAI specific operations */
+	void *hw;
+	void *ctrl_blk;
+};
+
+struct dao_desc {
+	unsigned int msr:4;
+	unsigned int passthru:1;
+};
+
+struct dao_rsc_ops {
+	int (*set_spos)(struct dao *dao, unsigned int spos);
+	int (*commit_write)(struct dao *dao);
+	int (*get_spos)(struct dao *dao, unsigned int *spos);
+	int (*reinit)(struct dao *dao, const struct dao_desc *desc);
+	int (*set_left_input)(struct dao *dao, struct rsc *input);
+	int (*set_right_input)(struct dao *dao, struct rsc *input);
+	int (*clear_left_input)(struct dao *dao);
+	int (*clear_right_input)(struct dao *dao);
+};
+
+struct dai_rsc_ops {
+	int (*set_srt_srcl)(struct dai *dai, struct rsc *src);
+	int (*set_srt_srcr)(struct dai *dai, struct rsc *src);
+	int (*set_srt_msr)(struct dai *dai, unsigned int msr);
+	int (*set_enb_src)(struct dai *dai, unsigned int enb);
+	int (*set_enb_srt)(struct dai *dai, unsigned int enb);
+	int (*commit_write)(struct dai *dai);
+};
+
+/* Define daio resource request description info */
+struct daio_desc {
+	unsigned int type:4;
+	unsigned int msr:4;
+	unsigned int passthru:1;
+};
+
+struct daio_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+	spinlock_t imap_lock;
+	struct list_head imappers;
+	struct imapper *init_imap;
+	unsigned int init_imap_added;
+
+	 /* request one daio resource */
+	int (*get_daio)(struct daio_mgr *mgr,
+			const struct daio_desc *desc, struct daio **rdaio);
+	/* return one daio resource */
+	int (*put_daio)(struct daio_mgr *mgr, struct daio *daio);
+	int (*daio_enable)(struct daio_mgr *mgr, struct daio *daio);
+	int (*daio_disable)(struct daio_mgr *mgr, struct daio *daio);
+	int (*imap_add)(struct daio_mgr *mgr, struct imapper *entry);
+	int (*imap_delete)(struct daio_mgr *mgr, struct imapper *entry);
+	int (*commit_write)(struct daio_mgr *mgr);
+};
+
+/* Constructor and destructor of daio resource manager */
+int daio_mgr_create(void *hw, struct daio_mgr **rdaio_mgr);
+int daio_mgr_destroy(struct daio_mgr *daio_mgr);
+
+#endif /* CTDAIO_H */
diff --git a/sound/pci/ctxfi/cthardware.c b/sound/pci/ctxfi/cthardware.c
new file mode 100644
index 0000000..8e64f48
--- /dev/null
+++ b/sound/pci/ctxfi/cthardware.c
@@ -0,0 +1,91 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthardware.c
+ *
+ * @Brief
+ * This file contains the implementation of hardware access methord.
+ *
+ * @Author	Liu Chun
+ * @Date 	Jun 26 2008
+ *
+ */
+
+#include "cthardware.h"
+#include "cthw20k1.h"
+#include "cthw20k2.h"
+#include <linux/bug.h>
+
+int __devinit create_hw_obj(struct pci_dev *pci, enum CHIPTYP chip_type,
+			    enum CTCARDS model, struct hw **rhw)
+{
+	int err;
+
+	switch (chip_type) {
+	case ATC20K1:
+		err = create_20k1_hw_obj(rhw);
+		break;
+	case ATC20K2:
+		err = create_20k2_hw_obj(rhw);
+		break;
+	default:
+		err = -ENODEV;
+		break;
+	}
+	if (err)
+		return err;
+
+	(*rhw)->pci = pci;
+	(*rhw)->chip_type = chip_type;
+	(*rhw)->model = model;
+
+	return 0;
+}
+
+int destroy_hw_obj(struct hw *hw)
+{
+	int err;
+
+	switch (hw->pci->device) {
+	case 0x0005:	/* 20k1 device */
+		err = destroy_20k1_hw_obj(hw);
+		break;
+	case 0x000B:	/* 20k2 device */
+		err = destroy_20k2_hw_obj(hw);
+		break;
+	default:
+		err = -ENODEV;
+		break;
+	}
+
+	return err;
+}
+
+unsigned int get_field(unsigned int data, unsigned int field)
+{
+	int i;
+
+	BUG_ON(!field);
+	/* @field should always be greater than 0 */
+	for (i = 0; !(field & (1 << i)); )
+		i++;
+
+	return (data & field) >> i;
+}
+
+void set_field(unsigned int *data, unsigned int field, unsigned int value)
+{
+	int i;
+
+	BUG_ON(!field);
+	/* @field should always be greater than 0 */
+	for (i = 0; !(field & (1 << i)); )
+		i++;
+
+	*data = (*data & (~field)) | ((value << i) & field);
+}
+
diff --git a/sound/pci/ctxfi/cthardware.h b/sound/pci/ctxfi/cthardware.h
new file mode 100644
index 0000000..4a8e04f
--- /dev/null
+++ b/sound/pci/ctxfi/cthardware.h
@@ -0,0 +1,196 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthardware.h
+ *
+ * @Brief
+ * This file contains the definition of hardware access methord.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTHARDWARE_H
+#define CTHARDWARE_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+
+enum CHIPTYP {
+	ATC20K1,
+	ATC20K2,
+	ATCNONE
+};
+
+enum CTCARDS {
+	/* 20k1 models */
+	CTSB055X,
+	CTSB073X,
+	CTUAA,
+	CT20K1_UNKNOWN,
+	/* 20k2 models */
+	CTSB0760,
+	CTHENDRIX,
+	CTSB0880,
+	NUM_CTCARDS		/* This should always be the last */
+};
+
+/* Type of input source for ADC */
+enum ADCSRC{
+	ADC_MICIN,
+	ADC_LINEIN,
+	ADC_VIDEO,
+	ADC_AUX,
+	ADC_NONE	/* Switch to digital input */
+};
+
+struct card_conf {
+	/* device virtual mem page table page physical addr
+	 * (supporting one page table page now) */
+	unsigned long vm_pgt_phys;
+	unsigned int rsr;	/* reference sample rate in Hzs*/
+	unsigned int msr;	/* master sample rate in rsrs */
+};
+
+struct hw {
+	int (*card_init)(struct hw *hw, struct card_conf *info);
+	int (*card_stop)(struct hw *hw);
+	int (*pll_init)(struct hw *hw, unsigned int rsr);
+	int (*is_adc_source_selected)(struct hw *hw, enum ADCSRC source);
+	int (*select_adc_source)(struct hw *hw, enum ADCSRC source);
+	int (*have_digit_io_switch)(struct hw *hw);
+
+	/* SRC operations */
+	int (*src_rsc_get_ctrl_blk)(void **rblk);
+	int (*src_rsc_put_ctrl_blk)(void *blk);
+	int (*src_set_state)(void *blk, unsigned int state);
+	int (*src_set_bm)(void *blk, unsigned int bm);
+	int (*src_set_rsr)(void *blk, unsigned int rsr);
+	int (*src_set_sf)(void *blk, unsigned int sf);
+	int (*src_set_wr)(void *blk, unsigned int wr);
+	int (*src_set_pm)(void *blk, unsigned int pm);
+	int (*src_set_rom)(void *blk, unsigned int rom);
+	int (*src_set_vo)(void *blk, unsigned int vo);
+	int (*src_set_st)(void *blk, unsigned int st);
+	int (*src_set_ie)(void *blk, unsigned int ie);
+	int (*src_set_ilsz)(void *blk, unsigned int ilsz);
+	int (*src_set_bp)(void *blk, unsigned int bp);
+	int (*src_set_cisz)(void *blk, unsigned int cisz);
+	int (*src_set_ca)(void *blk, unsigned int ca);
+	int (*src_set_sa)(void *blk, unsigned int sa);
+	int (*src_set_la)(void *blk, unsigned int la);
+	int (*src_set_pitch)(void *blk, unsigned int pitch);
+	int (*src_set_clear_zbufs)(void *blk, unsigned int clear);
+	int (*src_set_dirty)(void *blk, unsigned int flags);
+	int (*src_set_dirty_all)(void *blk);
+	int (*src_commit_write)(struct hw *hw, unsigned int idx, void *blk);
+	int (*src_get_ca)(struct hw *hw, unsigned int idx, void *blk);
+	unsigned int (*src_get_dirty)(void *blk);
+	unsigned int (*src_dirty_conj_mask)(void);
+	int (*src_mgr_get_ctrl_blk)(void **rblk);
+	int (*src_mgr_put_ctrl_blk)(void *blk);
+	/* syncly enable src @idx */
+	int (*src_mgr_enbs_src)(void *blk, unsigned int idx);
+	/* enable src @idx */
+	int (*src_mgr_enb_src)(void *blk, unsigned int idx);
+	/* disable src @idx */
+	int (*src_mgr_dsb_src)(void *blk, unsigned int idx);
+	int (*src_mgr_commit_write)(struct hw *hw, void *blk);
+
+	/* SRC Input Mapper operations */
+	int (*srcimp_mgr_get_ctrl_blk)(void **rblk);
+	int (*srcimp_mgr_put_ctrl_blk)(void *blk);
+	int (*srcimp_mgr_set_imaparc)(void *blk, unsigned int slot);
+	int (*srcimp_mgr_set_imapuser)(void *blk, unsigned int user);
+	int (*srcimp_mgr_set_imapnxt)(void *blk, unsigned int next);
+	int (*srcimp_mgr_set_imapaddr)(void *blk, unsigned int addr);
+	int (*srcimp_mgr_commit_write)(struct hw *hw, void *blk);
+
+	/* AMIXER operations */
+	int (*amixer_rsc_get_ctrl_blk)(void **rblk);
+	int (*amixer_rsc_put_ctrl_blk)(void *blk);
+	int (*amixer_mgr_get_ctrl_blk)(void **rblk);
+	int (*amixer_mgr_put_ctrl_blk)(void *blk);
+	int (*amixer_set_mode)(void *blk, unsigned int mode);
+	int (*amixer_set_iv)(void *blk, unsigned int iv);
+	int (*amixer_set_x)(void *blk, unsigned int x);
+	int (*amixer_set_y)(void *blk, unsigned int y);
+	int (*amixer_set_sadr)(void *blk, unsigned int sadr);
+	int (*amixer_set_se)(void *blk, unsigned int se);
+	int (*amixer_set_dirty)(void *blk, unsigned int flags);
+	int (*amixer_set_dirty_all)(void *blk);
+	int (*amixer_commit_write)(struct hw *hw, unsigned int idx, void *blk);
+	int (*amixer_get_y)(void *blk);
+	unsigned int (*amixer_get_dirty)(void *blk);
+
+	/* DAIO operations */
+	int (*dai_get_ctrl_blk)(void **rblk);
+	int (*dai_put_ctrl_blk)(void *blk);
+	int (*dai_srt_set_srco)(void *blk, unsigned int src);
+	int (*dai_srt_set_srcm)(void *blk, unsigned int src);
+	int (*dai_srt_set_rsr)(void *blk, unsigned int rsr);
+	int (*dai_srt_set_drat)(void *blk, unsigned int drat);
+	int (*dai_srt_set_ec)(void *blk, unsigned int ec);
+	int (*dai_srt_set_et)(void *blk, unsigned int et);
+	int (*dai_commit_write)(struct hw *hw, unsigned int idx, void *blk);
+	int (*dao_get_ctrl_blk)(void **rblk);
+	int (*dao_put_ctrl_blk)(void *blk);
+	int (*dao_set_spos)(void *blk, unsigned int spos);
+	int (*dao_commit_write)(struct hw *hw, unsigned int idx, void *blk);
+	int (*dao_get_spos)(void *blk, unsigned int *spos);
+
+	int (*daio_mgr_get_ctrl_blk)(struct hw *hw, void **rblk);
+	int (*daio_mgr_put_ctrl_blk)(void *blk);
+	int (*daio_mgr_enb_dai)(void *blk, unsigned int idx);
+	int (*daio_mgr_dsb_dai)(void *blk, unsigned int idx);
+	int (*daio_mgr_enb_dao)(void *blk, unsigned int idx);
+	int (*daio_mgr_dsb_dao)(void *blk, unsigned int idx);
+	int (*daio_mgr_dao_init)(void *blk, unsigned int idx,
+						unsigned int conf);
+	int (*daio_mgr_set_imaparc)(void *blk, unsigned int slot);
+	int (*daio_mgr_set_imapnxt)(void *blk, unsigned int next);
+	int (*daio_mgr_set_imapaddr)(void *blk, unsigned int addr);
+	int (*daio_mgr_commit_write)(struct hw *hw, void *blk);
+
+	int (*set_timer_irq)(struct hw *hw, int enable);
+	int (*set_timer_tick)(struct hw *hw, unsigned int tick);
+	unsigned int (*get_wc)(struct hw *hw);
+
+	void (*irq_callback)(void *data, unsigned int bit);
+	void *irq_callback_data;
+
+	struct pci_dev *pci;	/* the pci kernel structure of this card */
+	int irq;
+	unsigned long io_base;
+	unsigned long mem_base;
+
+	enum CHIPTYP chip_type;
+	enum CTCARDS model;
+};
+
+int create_hw_obj(struct pci_dev *pci, enum CHIPTYP chip_type,
+		  enum CTCARDS model, struct hw **rhw);
+int destroy_hw_obj(struct hw *hw);
+
+unsigned int get_field(unsigned int data, unsigned int field);
+void set_field(unsigned int *data, unsigned int field, unsigned int value);
+
+/* IRQ bits */
+#define	PLL_INT		(1 << 10) /* PLL input-clock out-of-range */
+#define FI_INT		(1 << 9)  /* forced interrupt */
+#define IT_INT		(1 << 8)  /* timer interrupt */
+#define PCI_INT		(1 << 7)  /* PCI bus error pending */
+#define URT_INT		(1 << 6)  /* UART Tx/Rx */
+#define GPI_INT		(1 << 5)  /* GPI pin */
+#define MIX_INT		(1 << 4)  /* mixer parameter segment FIFO channels */
+#define DAI_INT		(1 << 3)  /* DAI (SR-tracker or SPDIF-receiver) */
+#define TP_INT		(1 << 2)  /* transport priority queue */
+#define DSP_INT		(1 << 1)  /* DSP */
+#define SRC_INT		(1 << 0)  /* SRC channels */
+
+#endif /* CTHARDWARE_H */
diff --git a/sound/pci/ctxfi/cthw20k1.c b/sound/pci/ctxfi/cthw20k1.c
new file mode 100644
index 0000000..cb69d9d
--- /dev/null
+++ b/sound/pci/ctxfi/cthw20k1.c
@@ -0,0 +1,2248 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthw20k1.c
+ *
+ * @Brief
+ * This file contains the implementation of hardware access methord for 20k1.
+ *
+ * @Author	Liu Chun
+ * @Date 	Jun 24 2008
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include "cthw20k1.h"
+#include "ct20k1reg.h"
+
+#if BITS_PER_LONG == 32
+#define CT_XFI_DMA_MASK		DMA_BIT_MASK(32) /* 32 bit PTE */
+#else
+#define CT_XFI_DMA_MASK		DMA_BIT_MASK(64) /* 64 bit PTE */
+#endif
+
+struct hw20k1 {
+	struct hw hw;
+	spinlock_t reg_20k1_lock;
+	spinlock_t reg_pci_lock;
+};
+
+static u32 hw_read_20kx(struct hw *hw, u32 reg);
+static void hw_write_20kx(struct hw *hw, u32 reg, u32 data);
+static u32 hw_read_pci(struct hw *hw, u32 reg);
+static void hw_write_pci(struct hw *hw, u32 reg, u32 data);
+
+/*
+ * Type definition block.
+ * The layout of control structures can be directly applied on 20k2 chip.
+ */
+
+/*
+ * SRC control block definitions.
+ */
+
+/* SRC resource control block */
+#define SRCCTL_STATE	0x00000007
+#define SRCCTL_BM	0x00000008
+#define SRCCTL_RSR	0x00000030
+#define SRCCTL_SF	0x000001C0
+#define SRCCTL_WR	0x00000200
+#define SRCCTL_PM	0x00000400
+#define SRCCTL_ROM	0x00001800
+#define SRCCTL_VO	0x00002000
+#define SRCCTL_ST	0x00004000
+#define SRCCTL_IE	0x00008000
+#define SRCCTL_ILSZ	0x000F0000
+#define SRCCTL_BP	0x00100000
+
+#define SRCCCR_CISZ	0x000007FF
+#define SRCCCR_CWA	0x001FF800
+#define SRCCCR_D	0x00200000
+#define SRCCCR_RS	0x01C00000
+#define SRCCCR_NAL	0x3E000000
+#define SRCCCR_RA	0xC0000000
+
+#define SRCCA_CA	0x03FFFFFF
+#define SRCCA_RS	0x1C000000
+#define SRCCA_NAL	0xE0000000
+
+#define SRCSA_SA	0x03FFFFFF
+
+#define SRCLA_LA	0x03FFFFFF
+
+/* Mixer Parameter Ring ram Low and Hight register.
+ * Fixed-point value in 8.24 format for parameter channel */
+#define MPRLH_PITCH	0xFFFFFFFF
+
+/* SRC resource register dirty flags */
+union src_dirty {
+	struct {
+		u16 ctl:1;
+		u16 ccr:1;
+		u16 sa:1;
+		u16 la:1;
+		u16 ca:1;
+		u16 mpr:1;
+		u16 czbfs:1;	/* Clear Z-Buffers */
+		u16 rsv:9;
+	} bf;
+	u16 data;
+};
+
+struct src_rsc_ctrl_blk {
+	unsigned int	ctl;
+	unsigned int 	ccr;
+	unsigned int	ca;
+	unsigned int	sa;
+	unsigned int	la;
+	unsigned int	mpr;
+	union src_dirty	dirty;
+};
+
+/* SRC manager control block */
+union src_mgr_dirty {
+	struct {
+		u16 enb0:1;
+		u16 enb1:1;
+		u16 enb2:1;
+		u16 enb3:1;
+		u16 enb4:1;
+		u16 enb5:1;
+		u16 enb6:1;
+		u16 enb7:1;
+		u16 enbsa:1;
+		u16 rsv:7;
+	} bf;
+	u16 data;
+};
+
+struct src_mgr_ctrl_blk {
+	unsigned int		enbsa;
+	unsigned int		enb[8];
+	union src_mgr_dirty	dirty;
+};
+
+/* SRCIMP manager control block */
+#define SRCAIM_ARC	0x00000FFF
+#define SRCAIM_NXT	0x00FF0000
+#define SRCAIM_SRC	0xFF000000
+
+struct srcimap {
+	unsigned int srcaim;
+	unsigned int idx;
+};
+
+/* SRCIMP manager register dirty flags */
+union srcimp_mgr_dirty {
+	struct {
+		u16 srcimap:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+struct srcimp_mgr_ctrl_blk {
+	struct srcimap		srcimap;
+	union srcimp_mgr_dirty	dirty;
+};
+
+/*
+ * Function implementation block.
+ */
+
+static int src_get_rsc_ctrl_blk(void **rblk)
+{
+	struct src_rsc_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int src_put_rsc_ctrl_blk(void *blk)
+{
+	kfree((struct src_rsc_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int src_set_state(void *blk, unsigned int state)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_STATE, state);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_bm(void *blk, unsigned int bm)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_BM, bm);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_rsr(void *blk, unsigned int rsr)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_RSR, rsr);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_sf(void *blk, unsigned int sf)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_SF, sf);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_wr(void *blk, unsigned int wr)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_WR, wr);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_pm(void *blk, unsigned int pm)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_PM, pm);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_rom(void *blk, unsigned int rom)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ROM, rom);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_vo(void *blk, unsigned int vo)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_VO, vo);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_st(void *blk, unsigned int st)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ST, st);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_ie(void *blk, unsigned int ie)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_IE, ie);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_ilsz(void *blk, unsigned int ilsz)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ILSZ, ilsz);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_bp(void *blk, unsigned int bp)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_BP, bp);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_cisz(void *blk, unsigned int cisz)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ccr, SRCCCR_CISZ, cisz);
+	ctl->dirty.bf.ccr = 1;
+	return 0;
+}
+
+static int src_set_ca(void *blk, unsigned int ca)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ca, SRCCA_CA, ca);
+	ctl->dirty.bf.ca = 1;
+	return 0;
+}
+
+static int src_set_sa(void *blk, unsigned int sa)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->sa, SRCSA_SA, sa);
+	ctl->dirty.bf.sa = 1;
+	return 0;
+}
+
+static int src_set_la(void *blk, unsigned int la)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->la, SRCLA_LA, la);
+	ctl->dirty.bf.la = 1;
+	return 0;
+}
+
+static int src_set_pitch(void *blk, unsigned int pitch)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->mpr, MPRLH_PITCH, pitch);
+	ctl->dirty.bf.mpr = 1;
+	return 0;
+}
+
+static int src_set_clear_zbufs(void *blk, unsigned int clear)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.bf.czbfs = (clear ? 1 : 0);
+	return 0;
+}
+
+static int src_set_dirty(void *blk, unsigned int flags)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff);
+	return 0;
+}
+
+static int src_set_dirty_all(void *blk)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0);
+	return 0;
+}
+
+#define AR_SLOT_SIZE		4096
+#define AR_SLOT_BLOCK_SIZE	16
+#define AR_PTS_PITCH		6
+#define AR_PARAM_SRC_OFFSET	0x60
+
+static unsigned int src_param_pitch_mixer(unsigned int src_idx)
+{
+	return ((src_idx << 4) + AR_PTS_PITCH + AR_SLOT_SIZE
+			- AR_PARAM_SRC_OFFSET) % AR_SLOT_SIZE;
+
+}
+
+static int src_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+	int i;
+
+	if (ctl->dirty.bf.czbfs) {
+		/* Clear Z-Buffer registers */
+		for (i = 0; i < 8; i++)
+			hw_write_20kx(hw, SRCUPZ+idx*0x100+i*0x4, 0);
+
+		for (i = 0; i < 4; i++)
+			hw_write_20kx(hw, SRCDN0Z+idx*0x100+i*0x4, 0);
+
+		for (i = 0; i < 8; i++)
+			hw_write_20kx(hw, SRCDN1Z+idx*0x100+i*0x4, 0);
+
+		ctl->dirty.bf.czbfs = 0;
+	}
+	if (ctl->dirty.bf.mpr) {
+		/* Take the parameter mixer resource in the same group as that
+		 * the idx src is in for simplicity. Unlike src, all conjugate
+		 * parameter mixer resources must be programmed for
+		 * corresponding conjugate src resources. */
+		unsigned int pm_idx = src_param_pitch_mixer(idx);
+		hw_write_20kx(hw, PRING_LO_HI+4*pm_idx, ctl->mpr);
+		hw_write_20kx(hw, PMOPLO+8*pm_idx, 0x3);
+		hw_write_20kx(hw, PMOPHI+8*pm_idx, 0x0);
+		ctl->dirty.bf.mpr = 0;
+	}
+	if (ctl->dirty.bf.sa) {
+		hw_write_20kx(hw, SRCSA+idx*0x100, ctl->sa);
+		ctl->dirty.bf.sa = 0;
+	}
+	if (ctl->dirty.bf.la) {
+		hw_write_20kx(hw, SRCLA+idx*0x100, ctl->la);
+		ctl->dirty.bf.la = 0;
+	}
+	if (ctl->dirty.bf.ca) {
+		hw_write_20kx(hw, SRCCA+idx*0x100, ctl->ca);
+		ctl->dirty.bf.ca = 0;
+	}
+
+	/* Write srccf register */
+	hw_write_20kx(hw, SRCCF+idx*0x100, 0x0);
+
+	if (ctl->dirty.bf.ccr) {
+		hw_write_20kx(hw, SRCCCR+idx*0x100, ctl->ccr);
+		ctl->dirty.bf.ccr = 0;
+	}
+	if (ctl->dirty.bf.ctl) {
+		hw_write_20kx(hw, SRCCTL+idx*0x100, ctl->ctl);
+		ctl->dirty.bf.ctl = 0;
+	}
+
+	return 0;
+}
+
+static int src_get_ca(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	ctl->ca = hw_read_20kx(hw, SRCCA+idx*0x100);
+	ctl->dirty.bf.ca = 0;
+
+	return get_field(ctl->ca, SRCCA_CA);
+}
+
+static unsigned int src_get_dirty(void *blk)
+{
+	return ((struct src_rsc_ctrl_blk *)blk)->dirty.data;
+}
+
+static unsigned int src_dirty_conj_mask(void)
+{
+	return 0x20;
+}
+
+static int src_mgr_enbs_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enbsa = ~(0x0);
+	((struct src_mgr_ctrl_blk *)blk)->dirty.bf.enbsa = 1;
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32));
+	return 0;
+}
+
+static int src_mgr_enb_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32));
+	return 0;
+}
+
+static int src_mgr_dsb_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] &= ~(0x1 << (idx%32));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32));
+	return 0;
+}
+
+static int src_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct src_mgr_ctrl_blk *ctl = blk;
+	int i;
+	unsigned int ret;
+
+	if (ctl->dirty.bf.enbsa) {
+		do {
+			ret = hw_read_20kx(hw, SRCENBSTAT);
+		} while (ret & 0x1);
+		hw_write_20kx(hw, SRCENBS, ctl->enbsa);
+		ctl->dirty.bf.enbsa = 0;
+	}
+	for (i = 0; i < 8; i++) {
+		if ((ctl->dirty.data & (0x1 << i))) {
+			hw_write_20kx(hw, SRCENB+(i*0x100), ctl->enb[i]);
+			ctl->dirty.data &= ~(0x1 << i);
+		}
+	}
+
+	return 0;
+}
+
+static int src_mgr_get_ctrl_blk(void **rblk)
+{
+	struct src_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int src_mgr_put_ctrl_blk(void *blk)
+{
+	kfree((struct src_mgr_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int srcimp_mgr_get_ctrl_blk(void **rblk)
+{
+	struct srcimp_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int srcimp_mgr_put_ctrl_blk(void *blk)
+{
+	kfree((struct srcimp_mgr_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int srcimp_mgr_set_imaparc(void *blk, unsigned int slot)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_ARC, slot);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapuser(void *blk, unsigned int user)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_SRC, user);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapnxt(void *blk, unsigned int next)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_NXT, next);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapaddr(void *blk, unsigned int addr)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	ctl->srcimap.idx = addr;
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.srcimap) {
+		hw_write_20kx(hw, SRCIMAP+ctl->srcimap.idx*0x100,
+						ctl->srcimap.srcaim);
+		ctl->dirty.bf.srcimap = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * AMIXER control block definitions.
+ */
+
+#define AMOPLO_M	0x00000003
+#define AMOPLO_X	0x0003FFF0
+#define AMOPLO_Y	0xFFFC0000
+
+#define AMOPHI_SADR	0x000000FF
+#define AMOPHI_SE	0x80000000
+
+/* AMIXER resource register dirty flags */
+union amixer_dirty {
+	struct {
+		u16 amoplo:1;
+		u16 amophi:1;
+		u16 rsv:14;
+	} bf;
+	u16 data;
+};
+
+/* AMIXER resource control block */
+struct amixer_rsc_ctrl_blk {
+	unsigned int		amoplo;
+	unsigned int		amophi;
+	union amixer_dirty	dirty;
+};
+
+static int amixer_set_mode(void *blk, unsigned int mode)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_M, mode);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_iv(void *blk, unsigned int iv)
+{
+	/* 20k1 amixer does not have this field */
+	return 0;
+}
+
+static int amixer_set_x(void *blk, unsigned int x)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_X, x);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_y(void *blk, unsigned int y)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_Y, y);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_sadr(void *blk, unsigned int sadr)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amophi, AMOPHI_SADR, sadr);
+	ctl->dirty.bf.amophi = 1;
+	return 0;
+}
+
+static int amixer_set_se(void *blk, unsigned int se)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amophi, AMOPHI_SE, se);
+	ctl->dirty.bf.amophi = 1;
+	return 0;
+}
+
+static int amixer_set_dirty(void *blk, unsigned int flags)
+{
+	((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff);
+	return 0;
+}
+
+static int amixer_set_dirty_all(void *blk)
+{
+	((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0);
+	return 0;
+}
+
+static int amixer_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.amoplo || ctl->dirty.bf.amophi) {
+		hw_write_20kx(hw, AMOPLO+idx*8, ctl->amoplo);
+		ctl->dirty.bf.amoplo = 0;
+		hw_write_20kx(hw, AMOPHI+idx*8, ctl->amophi);
+		ctl->dirty.bf.amophi = 0;
+	}
+
+	return 0;
+}
+
+static int amixer_get_y(void *blk)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	return get_field(ctl->amoplo, AMOPLO_Y);
+}
+
+static unsigned int amixer_get_dirty(void *blk)
+{
+	return ((struct amixer_rsc_ctrl_blk *)blk)->dirty.data;
+}
+
+static int amixer_rsc_get_ctrl_blk(void **rblk)
+{
+	struct amixer_rsc_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int amixer_rsc_put_ctrl_blk(void *blk)
+{
+	kfree((struct amixer_rsc_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int amixer_mgr_get_ctrl_blk(void **rblk)
+{
+	/*amixer_mgr_ctrl_blk_t *blk;*/
+
+	*rblk = NULL;
+	/*blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;*/
+
+	return 0;
+}
+
+static int amixer_mgr_put_ctrl_blk(void *blk)
+{
+	/*kfree((amixer_mgr_ctrl_blk_t *)blk);*/
+
+	return 0;
+}
+
+/*
+ * DAIO control block definitions.
+ */
+
+/* Receiver Sample Rate Tracker Control register */
+#define SRTCTL_SRCR	0x000000FF
+#define SRTCTL_SRCL	0x0000FF00
+#define SRTCTL_RSR	0x00030000
+#define SRTCTL_DRAT	0x000C0000
+#define SRTCTL_RLE	0x10000000
+#define SRTCTL_RLP	0x20000000
+#define SRTCTL_EC	0x40000000
+#define SRTCTL_ET	0x80000000
+
+/* DAIO Receiver register dirty flags */
+union dai_dirty {
+	struct {
+		u16 srtctl:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+/* DAIO Receiver control block */
+struct dai_ctrl_blk {
+	unsigned int	srtctl;
+	union dai_dirty	dirty;
+};
+
+/* S/PDIF Transmitter register dirty flags */
+union dao_dirty {
+	struct {
+		u16 spos:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+/* S/PDIF Transmitter control block */
+struct dao_ctrl_blk {
+	unsigned int 	spos; /* S/PDIF Output Channel Status Register */
+	union dao_dirty	dirty;
+};
+
+/* Audio Input Mapper RAM */
+#define AIM_ARC		0x00000FFF
+#define AIM_NXT		0x007F0000
+
+struct daoimap {
+	unsigned int aim;
+	unsigned int idx;
+};
+
+/* I2S Transmitter/Receiver Control register */
+#define I2SCTL_EA	0x00000004
+#define I2SCTL_EI	0x00000010
+
+/* S/PDIF Transmitter Control register */
+#define SPOCTL_OE	0x00000001
+#define SPOCTL_OS	0x0000000E
+#define SPOCTL_RIV	0x00000010
+#define SPOCTL_LIV	0x00000020
+#define SPOCTL_SR	0x000000C0
+
+/* S/PDIF Receiver Control register */
+#define SPICTL_EN	0x00000001
+#define SPICTL_I24	0x00000002
+#define SPICTL_IB	0x00000004
+#define SPICTL_SM	0x00000008
+#define SPICTL_VM	0x00000010
+
+/* DAIO manager register dirty flags */
+union daio_mgr_dirty {
+	struct {
+		u32 i2soctl:4;
+		u32 i2sictl:4;
+		u32 spoctl:4;
+		u32 spictl:4;
+		u32 daoimap:1;
+		u32 rsv:15;
+	} bf;
+	u32 data;
+};
+
+/* DAIO manager control block */
+struct daio_mgr_ctrl_blk {
+	unsigned int		i2sctl;
+	unsigned int		spoctl;
+	unsigned int		spictl;
+	struct daoimap		daoimap;
+	union daio_mgr_dirty	dirty;
+};
+
+static int dai_srt_set_srcr(void *blk, unsigned int src)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_SRCR, src);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_srcl(void *blk, unsigned int src)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_SRCL, src);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_rsr(void *blk, unsigned int rsr)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_RSR, rsr);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_drat(void *blk, unsigned int drat)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_DRAT, drat);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_ec(void *blk, unsigned int ec)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_EC, ec ? 1 : 0);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_et(void *blk, unsigned int et)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_ET, et ? 1 : 0);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.srtctl) {
+		if (idx < 4) {
+			/* S/PDIF SRTs */
+			hw_write_20kx(hw, SRTSCTL+0x4*idx, ctl->srtctl);
+		} else {
+			/* I2S SRT */
+			hw_write_20kx(hw, SRTICTL, ctl->srtctl);
+		}
+		ctl->dirty.bf.srtctl = 0;
+	}
+
+	return 0;
+}
+
+static int dai_get_ctrl_blk(void **rblk)
+{
+	struct dai_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int dai_put_ctrl_blk(void *blk)
+{
+	kfree((struct dai_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int dao_set_spos(void *blk, unsigned int spos)
+{
+	((struct dao_ctrl_blk *)blk)->spos = spos;
+	((struct dao_ctrl_blk *)blk)->dirty.bf.spos = 1;
+	return 0;
+}
+
+static int dao_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct dao_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.spos) {
+		if (idx < 4) {
+			/* S/PDIF SPOSx */
+			hw_write_20kx(hw, SPOS+0x4*idx, ctl->spos);
+		}
+		ctl->dirty.bf.spos = 0;
+	}
+
+	return 0;
+}
+
+static int dao_get_spos(void *blk, unsigned int *spos)
+{
+	*spos = ((struct dao_ctrl_blk *)blk)->spos;
+	return 0;
+}
+
+static int dao_get_ctrl_blk(void **rblk)
+{
+	struct dao_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int dao_put_ctrl_blk(void *blk)
+{
+	kfree((struct dao_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int daio_mgr_enb_dai(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF input */
+		set_field(&ctl->spictl, SPICTL_EN << (idx*8), 1);
+		ctl->dirty.bf.spictl |= (0x1 << idx);
+	} else {
+		/* I2S input */
+		idx %= 4;
+		set_field(&ctl->i2sctl, I2SCTL_EI << (idx*8), 1);
+		ctl->dirty.bf.i2sictl |= (0x1 << idx);
+	}
+	return 0;
+}
+
+static int daio_mgr_dsb_dai(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF input */
+		set_field(&ctl->spictl, SPICTL_EN << (idx*8), 0);
+		ctl->dirty.bf.spictl |= (0x1 << idx);
+	} else {
+		/* I2S input */
+		idx %= 4;
+		set_field(&ctl->i2sctl, I2SCTL_EI << (idx*8), 0);
+		ctl->dirty.bf.i2sictl |= (0x1 << idx);
+	}
+	return 0;
+}
+
+static int daio_mgr_enb_dao(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF output */
+		set_field(&ctl->spoctl, SPOCTL_OE << (idx*8), 1);
+		ctl->dirty.bf.spoctl |= (0x1 << idx);
+	} else {
+		/* I2S output */
+		idx %= 4;
+		set_field(&ctl->i2sctl, I2SCTL_EA << (idx*8), 1);
+		ctl->dirty.bf.i2soctl |= (0x1 << idx);
+	}
+	return 0;
+}
+
+static int daio_mgr_dsb_dao(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF output */
+		set_field(&ctl->spoctl, SPOCTL_OE << (idx*8), 0);
+		ctl->dirty.bf.spoctl |= (0x1 << idx);
+	} else {
+		/* I2S output */
+		idx %= 4;
+		set_field(&ctl->i2sctl, I2SCTL_EA << (idx*8), 0);
+		ctl->dirty.bf.i2soctl |= (0x1 << idx);
+	}
+	return 0;
+}
+
+static int daio_mgr_dao_init(void *blk, unsigned int idx, unsigned int conf)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF output */
+		switch ((conf & 0x7)) {
+		case 0:
+			set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 3);
+			break; /* CDIF */
+		case 1:
+			set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 0);
+			break;
+		case 2:
+			set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 1);
+			break;
+		case 4:
+			set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 2);
+			break;
+		default:
+			break;
+		}
+		set_field(&ctl->spoctl, SPOCTL_LIV << (idx*8),
+			  (conf >> 4) & 0x1); /* Non-audio */
+		set_field(&ctl->spoctl, SPOCTL_RIV << (idx*8),
+			  (conf >> 4) & 0x1); /* Non-audio */
+		set_field(&ctl->spoctl, SPOCTL_OS << (idx*8),
+			  ((conf >> 3) & 0x1) ? 2 : 2); /* Raw */
+
+		ctl->dirty.bf.spoctl |= (0x1 << idx);
+	} else {
+		/* I2S output */
+		/*idx %= 4; */
+	}
+	return 0;
+}
+
+static int daio_mgr_set_imaparc(void *blk, unsigned int slot)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->daoimap.aim, AIM_ARC, slot);
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_set_imapnxt(void *blk, unsigned int next)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->daoimap.aim, AIM_NXT, next);
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_set_imapaddr(void *blk, unsigned int addr)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	ctl->daoimap.idx = addr;
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+	int i;
+
+	if (ctl->dirty.bf.i2sictl || ctl->dirty.bf.i2soctl) {
+		for (i = 0; i < 4; i++) {
+			if ((ctl->dirty.bf.i2sictl & (0x1 << i)))
+				ctl->dirty.bf.i2sictl &= ~(0x1 << i);
+
+			if ((ctl->dirty.bf.i2soctl & (0x1 << i)))
+				ctl->dirty.bf.i2soctl &= ~(0x1 << i);
+		}
+		hw_write_20kx(hw, I2SCTL, ctl->i2sctl);
+		mdelay(1);
+	}
+	if (ctl->dirty.bf.spoctl) {
+		for (i = 0; i < 4; i++) {
+			if ((ctl->dirty.bf.spoctl & (0x1 << i)))
+				ctl->dirty.bf.spoctl &= ~(0x1 << i);
+		}
+		hw_write_20kx(hw, SPOCTL, ctl->spoctl);
+		mdelay(1);
+	}
+	if (ctl->dirty.bf.spictl) {
+		for (i = 0; i < 4; i++) {
+			if ((ctl->dirty.bf.spictl & (0x1 << i)))
+				ctl->dirty.bf.spictl &= ~(0x1 << i);
+		}
+		hw_write_20kx(hw, SPICTL, ctl->spictl);
+		mdelay(1);
+	}
+	if (ctl->dirty.bf.daoimap) {
+		hw_write_20kx(hw, DAOIMAP+ctl->daoimap.idx*4,
+					ctl->daoimap.aim);
+		ctl->dirty.bf.daoimap = 0;
+	}
+
+	return 0;
+}
+
+static int daio_mgr_get_ctrl_blk(struct hw *hw, void **rblk)
+{
+	struct daio_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	blk->i2sctl = hw_read_20kx(hw, I2SCTL);
+	blk->spoctl = hw_read_20kx(hw, SPOCTL);
+	blk->spictl = hw_read_20kx(hw, SPICTL);
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int daio_mgr_put_ctrl_blk(void *blk)
+{
+	kfree((struct daio_mgr_ctrl_blk *)blk);
+
+	return 0;
+}
+
+/* Timer interrupt */
+static int set_timer_irq(struct hw *hw, int enable)
+{
+	hw_write_20kx(hw, GIE, enable ? IT_INT : 0);
+	return 0;
+}
+
+static int set_timer_tick(struct hw *hw, unsigned int ticks)
+{
+	if (ticks)
+		ticks |= TIMR_IE | TIMR_IP;
+	hw_write_20kx(hw, TIMR, ticks);
+	return 0;
+}
+
+static unsigned int get_wc(struct hw *hw)
+{
+	return hw_read_20kx(hw, WC);
+}
+
+/* Card hardware initialization block */
+struct dac_conf {
+	unsigned int msr; /* master sample rate in rsrs */
+};
+
+struct adc_conf {
+	unsigned int msr; 	/* master sample rate in rsrs */
+	unsigned char input; 	/* the input source of ADC */
+	unsigned char mic20db; 	/* boost mic by 20db if input is microphone */
+};
+
+struct daio_conf {
+	unsigned int msr; /* master sample rate in rsrs */
+};
+
+struct trn_conf {
+	unsigned long vm_pgt_phys;
+};
+
+static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
+{
+	u32 i2sorg;
+	u32 spdorg;
+
+	/* Read I2S CTL.  Keep original value. */
+	/*i2sorg = hw_read_20kx(hw, I2SCTL);*/
+	i2sorg = 0x94040404; /* enable all audio out and I2S-D input */
+	/* Program I2S with proper master sample rate and enable
+	 * the correct I2S channel. */
+	i2sorg &= 0xfffffffc;
+
+	/* Enable S/PDIF-out-A in fixed 24-bit data
+	 * format and default to 48kHz. */
+	/* Disable all before doing any changes. */
+	hw_write_20kx(hw, SPOCTL, 0x0);
+	spdorg = 0x05;
+
+	switch (info->msr) {
+	case 1:
+		i2sorg |= 1;
+		spdorg |= (0x0 << 6);
+		break;
+	case 2:
+		i2sorg |= 2;
+		spdorg |= (0x1 << 6);
+		break;
+	case 4:
+		i2sorg |= 3;
+		spdorg |= (0x2 << 6);
+		break;
+	default:
+		i2sorg |= 1;
+		break;
+	}
+
+	hw_write_20kx(hw, I2SCTL, i2sorg);
+	hw_write_20kx(hw, SPOCTL, spdorg);
+
+	/* Enable S/PDIF-in-A in fixed 24-bit data format. */
+	/* Disable all before doing any changes. */
+	hw_write_20kx(hw, SPICTL, 0x0);
+	mdelay(1);
+	spdorg = 0x0a0a0a0a;
+	hw_write_20kx(hw, SPICTL, spdorg);
+	mdelay(1);
+
+	return 0;
+}
+
+/* TRANSPORT operations */
+static int hw_trn_init(struct hw *hw, const struct trn_conf *info)
+{
+	u32 trnctl;
+	u32 ptp_phys_low, ptp_phys_high;
+
+	/* Set up device page table */
+	if ((~0UL) == info->vm_pgt_phys) {
+		printk(KERN_ERR "Wrong device page table page address!\n");
+		return -1;
+	}
+
+	trnctl = 0x13;  /* 32-bit, 4k-size page */
+	ptp_phys_low = (u32)info->vm_pgt_phys;
+	ptp_phys_high = upper_32_bits(info->vm_pgt_phys);
+	if (sizeof(void *) == 8) /* 64bit address */
+		trnctl |= (1 << 2);
+#if 0 /* Only 4k h/w pages for simplicitiy */
+#if PAGE_SIZE == 8192
+	trnctl |= (1<<5);
+#endif
+#endif
+	hw_write_20kx(hw, PTPALX, ptp_phys_low);
+	hw_write_20kx(hw, PTPAHX, ptp_phys_high);
+	hw_write_20kx(hw, TRNCTL, trnctl);
+	hw_write_20kx(hw, TRNIS, 0x200c01); /* realy needed? */
+
+	return 0;
+}
+
+/* Card initialization */
+#define GCTL_EAC	0x00000001
+#define GCTL_EAI	0x00000002
+#define GCTL_BEP	0x00000004
+#define GCTL_BES	0x00000008
+#define GCTL_DSP	0x00000010
+#define GCTL_DBP	0x00000020
+#define GCTL_ABP	0x00000040
+#define GCTL_TBP	0x00000080
+#define GCTL_SBP	0x00000100
+#define GCTL_FBP	0x00000200
+#define GCTL_XA		0x00000400
+#define GCTL_ET		0x00000800
+#define GCTL_PR		0x00001000
+#define GCTL_MRL	0x00002000
+#define GCTL_SDE	0x00004000
+#define GCTL_SDI	0x00008000
+#define GCTL_SM		0x00010000
+#define GCTL_SR		0x00020000
+#define GCTL_SD		0x00040000
+#define GCTL_SE		0x00080000
+#define GCTL_AID	0x00100000
+
+static int hw_pll_init(struct hw *hw, unsigned int rsr)
+{
+	unsigned int pllctl;
+	int i;
+
+	pllctl = (48000 == rsr) ? 0x1480a001 : 0x1480a731;
+	for (i = 0; i < 3; i++) {
+		if (hw_read_20kx(hw, PLLCTL) == pllctl)
+			break;
+
+		hw_write_20kx(hw, PLLCTL, pllctl);
+		mdelay(40);
+	}
+	if (i >= 3) {
+		printk(KERN_ALERT "PLL initialization failed!!!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int hw_auto_init(struct hw *hw)
+{
+	unsigned int gctl;
+	int i;
+
+	gctl = hw_read_20kx(hw, GCTL);
+	set_field(&gctl, GCTL_EAI, 0);
+	hw_write_20kx(hw, GCTL, gctl);
+	set_field(&gctl, GCTL_EAI, 1);
+	hw_write_20kx(hw, GCTL, gctl);
+	mdelay(10);
+	for (i = 0; i < 400000; i++) {
+		gctl = hw_read_20kx(hw, GCTL);
+		if (get_field(gctl, GCTL_AID))
+			break;
+	}
+	if (!get_field(gctl, GCTL_AID)) {
+		printk(KERN_ALERT "Card Auto-init failed!!!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int i2c_unlock(struct hw *hw)
+{
+	if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa)
+		return 0;
+
+	hw_write_pci(hw, 0xcc, 0x8c);
+	hw_write_pci(hw, 0xcc, 0x0e);
+	if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa)
+		return 0;
+
+	hw_write_pci(hw, 0xcc, 0xee);
+	hw_write_pci(hw, 0xcc, 0xaa);
+	if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa)
+		return 0;
+
+	return -1;
+}
+
+static void i2c_lock(struct hw *hw)
+{
+	if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa)
+		hw_write_pci(hw, 0xcc, 0x00);
+}
+
+static void i2c_write(struct hw *hw, u32 device, u32 addr, u32 data)
+{
+	unsigned int ret;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000));
+	hw_write_pci(hw, 0xE0, device);
+	hw_write_pci(hw, 0xE4, (data << 8) | (addr & 0xff));
+}
+
+/* DAC operations */
+
+static int hw_reset_dac(struct hw *hw)
+{
+	u32 i;
+	u16 gpioorg;
+	unsigned int ret;
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000));
+	hw_write_pci(hw, 0xEC, 0x05);  /* write to i2c status control */
+
+	/* To be effective, need to reset the DAC twice. */
+	for (i = 0; i < 2;  i++) {
+		/* set gpio */
+		mdelay(100);
+		gpioorg = (u16)hw_read_20kx(hw, GPIO);
+		gpioorg &= 0xfffd;
+		hw_write_20kx(hw, GPIO, gpioorg);
+		mdelay(1);
+		hw_write_20kx(hw, GPIO, gpioorg | 0x2);
+	}
+
+	i2c_write(hw, 0x00180080, 0x01, 0x80);
+	i2c_write(hw, 0x00180080, 0x02, 0x10);
+
+	i2c_lock(hw);
+
+	return 0;
+}
+
+static int hw_dac_init(struct hw *hw, const struct dac_conf *info)
+{
+	u32 data;
+	u16 gpioorg;
+	unsigned int ret;
+
+	if (hw->model == CTSB055X) {
+		/* SB055x, unmute outputs */
+		gpioorg = (u16)hw_read_20kx(hw, GPIO);
+		gpioorg &= 0xffbf;	/* set GPIO6 to low */
+		gpioorg |= 2;		/* set GPIO1 to high */
+		hw_write_20kx(hw, GPIO, gpioorg);
+		return 0;
+	}
+
+	/* mute outputs */
+	gpioorg = (u16)hw_read_20kx(hw, GPIO);
+	gpioorg &= 0xffbf;
+	hw_write_20kx(hw, GPIO, gpioorg);
+
+	hw_reset_dac(hw);
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	hw_write_pci(hw, 0xEC, 0x05);  /* write to i2c status control */
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000));
+
+	switch (info->msr) {
+	case 1:
+		data = 0x24;
+		break;
+	case 2:
+		data = 0x25;
+		break;
+	case 4:
+		data = 0x26;
+		break;
+	default:
+		data = 0x24;
+		break;
+	}
+
+	i2c_write(hw, 0x00180080, 0x06, data);
+	i2c_write(hw, 0x00180080, 0x09, data);
+	i2c_write(hw, 0x00180080, 0x0c, data);
+	i2c_write(hw, 0x00180080, 0x0f, data);
+
+	i2c_lock(hw);
+
+	/* unmute outputs */
+	gpioorg = (u16)hw_read_20kx(hw, GPIO);
+	gpioorg = gpioorg | 0x40;
+	hw_write_20kx(hw, GPIO, gpioorg);
+
+	return 0;
+}
+
+/* ADC operations */
+
+static int is_adc_input_selected_SB055x(struct hw *hw, enum ADCSRC type)
+{
+	return 0;
+}
+
+static int is_adc_input_selected_SBx(struct hw *hw, enum ADCSRC type)
+{
+	u32 data;
+
+	data = hw_read_20kx(hw, GPIO);
+	switch (type) {
+	case ADC_MICIN:
+		data = ((data & (0x1<<7)) && (data & (0x1<<8)));
+		break;
+	case ADC_LINEIN:
+		data = (!(data & (0x1<<7)) && (data & (0x1<<8)));
+		break;
+	case ADC_NONE: /* Digital I/O */
+		data = (!(data & (0x1<<8)));
+		break;
+	default:
+		data = 0;
+	}
+	return data;
+}
+
+static int is_adc_input_selected_hendrix(struct hw *hw, enum ADCSRC type)
+{
+	u32 data;
+
+	data = hw_read_20kx(hw, GPIO);
+	switch (type) {
+	case ADC_MICIN:
+		data = (data & (0x1 << 7)) ? 1 : 0;
+		break;
+	case ADC_LINEIN:
+		data = (data & (0x1 << 7)) ? 0 : 1;
+		break;
+	default:
+		data = 0;
+	}
+	return data;
+}
+
+static int hw_is_adc_input_selected(struct hw *hw, enum ADCSRC type)
+{
+	switch (hw->model) {
+	case CTSB055X:
+		return is_adc_input_selected_SB055x(hw, type);
+	case CTSB073X:
+		return is_adc_input_selected_hendrix(hw, type);
+	case CTUAA:
+		return is_adc_input_selected_hendrix(hw, type);
+	default:
+		return is_adc_input_selected_SBx(hw, type);
+	}
+}
+
+static int
+adc_input_select_SB055x(struct hw *hw, enum ADCSRC type, unsigned char boost)
+{
+	u32 data;
+
+	/*
+	 * check and set the following GPIO bits accordingly
+	 * ADC_Gain		= GPIO2
+	 * DRM_off		= GPIO3
+	 * Mic_Pwr_on		= GPIO7
+	 * Digital_IO_Sel	= GPIO8
+	 * Mic_Sw		= GPIO9
+	 * Aux/MicLine_Sw	= GPIO12
+	 */
+	data = hw_read_20kx(hw, GPIO);
+	data &= 0xec73;
+	switch (type) {
+	case ADC_MICIN:
+		data |= (0x1<<7) | (0x1<<8) | (0x1<<9) ;
+		data |= boost ? (0x1<<2) : 0;
+		break;
+	case ADC_LINEIN:
+		data |= (0x1<<8);
+		break;
+	case ADC_AUX:
+		data |= (0x1<<8) | (0x1<<12);
+		break;
+	case ADC_NONE:
+		data |= (0x1<<12);  /* set to digital */
+		break;
+	default:
+		return -1;
+	}
+
+	hw_write_20kx(hw, GPIO, data);
+
+	return 0;
+}
+
+
+static int
+adc_input_select_SBx(struct hw *hw, enum ADCSRC type, unsigned char boost)
+{
+	u32 data;
+	u32 i2c_data;
+	unsigned int ret;
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000)); /* i2c ready poll */
+	/* set i2c access mode as Direct Control */
+	hw_write_pci(hw, 0xEC, 0x05);
+
+	data = hw_read_20kx(hw, GPIO);
+	switch (type) {
+	case ADC_MICIN:
+		data |= ((0x1 << 7) | (0x1 << 8));
+		i2c_data = 0x1;  /* Mic-in */
+		break;
+	case ADC_LINEIN:
+		data &= ~(0x1 << 7);
+		data |= (0x1 << 8);
+		i2c_data = 0x2; /* Line-in */
+		break;
+	case ADC_NONE:
+		data &= ~(0x1 << 8);
+		i2c_data = 0x0; /* set to Digital */
+		break;
+	default:
+		i2c_lock(hw);
+		return -1;
+	}
+	hw_write_20kx(hw, GPIO, data);
+	i2c_write(hw, 0x001a0080, 0x2a, i2c_data);
+	if (boost) {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xe7); /* +12dB boost */
+		i2c_write(hw, 0x001a0080, 0x1e, 0xe7); /* +12dB boost */
+	} else {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xcf); /* No boost */
+		i2c_write(hw, 0x001a0080, 0x1e, 0xcf); /* No boost */
+	}
+
+	i2c_lock(hw);
+
+	return 0;
+}
+
+static int
+adc_input_select_hendrix(struct hw *hw, enum ADCSRC type, unsigned char boost)
+{
+	u32 data;
+	u32 i2c_data;
+	unsigned int ret;
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000)); /* i2c ready poll */
+	/* set i2c access mode as Direct Control */
+	hw_write_pci(hw, 0xEC, 0x05);
+
+	data = hw_read_20kx(hw, GPIO);
+	switch (type) {
+	case ADC_MICIN:
+		data |= (0x1 << 7);
+		i2c_data = 0x1;  /* Mic-in */
+		break;
+	case ADC_LINEIN:
+		data &= ~(0x1 << 7);
+		i2c_data = 0x2; /* Line-in */
+		break;
+	default:
+		i2c_lock(hw);
+		return -1;
+	}
+	hw_write_20kx(hw, GPIO, data);
+	i2c_write(hw, 0x001a0080, 0x2a, i2c_data);
+	if (boost) {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xe7); /* +12dB boost */
+		i2c_write(hw, 0x001a0080, 0x1e, 0xe7); /* +12dB boost */
+	} else {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xcf); /* No boost */
+		i2c_write(hw, 0x001a0080, 0x1e, 0xcf); /* No boost */
+	}
+
+	i2c_lock(hw);
+
+	return 0;
+}
+
+static int hw_adc_input_select(struct hw *hw, enum ADCSRC type)
+{
+	int state = type == ADC_MICIN;
+
+	switch (hw->model) {
+	case CTSB055X:
+		return adc_input_select_SB055x(hw, type, state);
+	case CTSB073X:
+		return adc_input_select_hendrix(hw, type, state);
+	case CTUAA:
+		return adc_input_select_hendrix(hw, type, state);
+	default:
+		return adc_input_select_SBx(hw, type, state);
+	}
+}
+
+static int adc_init_SB055x(struct hw *hw, int input, int mic20db)
+{
+	return adc_input_select_SB055x(hw, input, mic20db);
+}
+
+static int adc_init_SBx(struct hw *hw, int input, int mic20db)
+{
+	u16 gpioorg;
+	u16 input_source;
+	u32 adcdata;
+	unsigned int ret;
+
+	input_source = 0x100;  /* default to analog */
+	switch (input) {
+	case ADC_MICIN:
+		adcdata = 0x1;
+		input_source = 0x180;  /* set GPIO7 to select Mic */
+		break;
+	case ADC_LINEIN:
+		adcdata = 0x2;
+		break;
+	case ADC_VIDEO:
+		adcdata = 0x4;
+		break;
+	case ADC_AUX:
+		adcdata = 0x8;
+		break;
+	case ADC_NONE:
+		adcdata = 0x0;
+		input_source = 0x0;  /* set to Digital */
+		break;
+	default:
+		adcdata = 0x0;
+		break;
+	}
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000)); /* i2c ready poll */
+	hw_write_pci(hw, 0xEC, 0x05);  /* write to i2c status control */
+
+	i2c_write(hw, 0x001a0080, 0x0e, 0x08);
+	i2c_write(hw, 0x001a0080, 0x18, 0x0a);
+	i2c_write(hw, 0x001a0080, 0x28, 0x86);
+	i2c_write(hw, 0x001a0080, 0x2a, adcdata);
+
+	if (mic20db) {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xf7);
+		i2c_write(hw, 0x001a0080, 0x1e, 0xf7);
+	} else {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xcf);
+		i2c_write(hw, 0x001a0080, 0x1e, 0xcf);
+	}
+
+	if (!(hw_read_20kx(hw, ID0) & 0x100))
+		i2c_write(hw, 0x001a0080, 0x16, 0x26);
+
+	i2c_lock(hw);
+
+	gpioorg = (u16)hw_read_20kx(hw,  GPIO);
+	gpioorg &= 0xfe7f;
+	gpioorg |= input_source;
+	hw_write_20kx(hw, GPIO, gpioorg);
+
+	return 0;
+}
+
+static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
+{
+	if (hw->model == CTSB055X)
+		return adc_init_SB055x(hw, info->input, info->mic20db);
+	else
+		return adc_init_SBx(hw, info->input, info->mic20db);
+}
+
+static int hw_have_digit_io_switch(struct hw *hw)
+{
+	/* SB073x and Vista compatible cards have no digit IO switch */
+	return !(hw->model == CTSB073X || hw->model == CTUAA);
+}
+
+#define CTLBITS(a, b, c, d)	(((a) << 24) | ((b) << 16) | ((c) << 8) | (d))
+
+#define UAA_CFG_PWRSTATUS	0x44
+#define UAA_CFG_SPACE_FLAG	0xA0
+#define UAA_CORE_CHANGE		0x3FFC
+static int uaa_to_xfi(struct pci_dev *pci)
+{
+	unsigned int bar0, bar1, bar2, bar3, bar4, bar5;
+	unsigned int cmd, irq, cl_size, l_timer, pwr;
+	unsigned int is_uaa;
+	unsigned int data[4] = {0};
+	unsigned int io_base;
+	void *mem_base;
+	int i;
+	const u32 CTLX = CTLBITS('C', 'T', 'L', 'X');
+	const u32 CTL_ = CTLBITS('C', 'T', 'L', '-');
+	const u32 CTLF = CTLBITS('C', 'T', 'L', 'F');
+	const u32 CTLi = CTLBITS('C', 'T', 'L', 'i');
+	const u32 CTLA = CTLBITS('C', 'T', 'L', 'A');
+	const u32 CTLZ = CTLBITS('C', 'T', 'L', 'Z');
+	const u32 CTLL = CTLBITS('C', 'T', 'L', 'L');
+
+	/* By default, Hendrix card UAA Bar0 should be using memory... */
+	io_base = pci_resource_start(pci, 0);
+	mem_base = ioremap(io_base, pci_resource_len(pci, 0));
+	if (NULL == mem_base)
+		return -ENOENT;
+
+	/* Read current mode from Mode Change Register */
+	for (i = 0; i < 4; i++)
+		data[i] = readl(mem_base + UAA_CORE_CHANGE);
+
+	/* Determine current mode... */
+	if (data[0] == CTLA) {
+		is_uaa = ((data[1] == CTLZ && data[2] == CTLL
+			  && data[3] == CTLA) || (data[1] == CTLA
+			  && data[2] == CTLZ && data[3] == CTLL));
+	} else if (data[0] == CTLZ) {
+		is_uaa = (data[1] == CTLL
+				&& data[2] == CTLA && data[3] == CTLA);
+	} else if (data[0] == CTLL) {
+		is_uaa = (data[1] == CTLA
+				&& data[2] == CTLA && data[3] == CTLZ);
+	} else {
+		is_uaa = 0;
+	}
+
+	if (!is_uaa) {
+		/* Not in UAA mode currently. Return directly. */
+		iounmap(mem_base);
+		return 0;
+	}
+
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_0, &bar0);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_1, &bar1);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_2, &bar2);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_3, &bar3);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_4, &bar4);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_5, &bar5);
+	pci_read_config_dword(pci, PCI_INTERRUPT_LINE, &irq);
+	pci_read_config_dword(pci, PCI_CACHE_LINE_SIZE, &cl_size);
+	pci_read_config_dword(pci, PCI_LATENCY_TIMER, &l_timer);
+	pci_read_config_dword(pci, UAA_CFG_PWRSTATUS, &pwr);
+	pci_read_config_dword(pci, PCI_COMMAND, &cmd);
+
+	/* Set up X-Fi core PCI configuration space. */
+	/* Switch to X-Fi config space with BAR0 exposed. */
+	pci_write_config_dword(pci, UAA_CFG_SPACE_FLAG, 0x87654321);
+	/* Copy UAA's BAR5 into X-Fi BAR0 */
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_0, bar5);
+	/* Switch to X-Fi config space without BAR0 exposed. */
+	pci_write_config_dword(pci, UAA_CFG_SPACE_FLAG, 0x12345678);
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_1, bar1);
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_2, bar2);
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_3, bar3);
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_4, bar4);
+	pci_write_config_dword(pci, PCI_INTERRUPT_LINE, irq);
+	pci_write_config_dword(pci, PCI_CACHE_LINE_SIZE, cl_size);
+	pci_write_config_dword(pci, PCI_LATENCY_TIMER, l_timer);
+	pci_write_config_dword(pci, UAA_CFG_PWRSTATUS, pwr);
+	pci_write_config_dword(pci, PCI_COMMAND, cmd);
+
+	/* Switch to X-Fi mode */
+	writel(CTLX, (mem_base + UAA_CORE_CHANGE));
+	writel(CTL_, (mem_base + UAA_CORE_CHANGE));
+	writel(CTLF, (mem_base + UAA_CORE_CHANGE));
+	writel(CTLi, (mem_base + UAA_CORE_CHANGE));
+
+	iounmap(mem_base);
+
+	return 0;
+}
+
+static irqreturn_t ct_20k1_interrupt(int irq, void *dev_id)
+{
+	struct hw *hw = dev_id;
+	unsigned int status;
+
+	status = hw_read_20kx(hw, GIP);
+	if (!status)
+		return IRQ_NONE;
+
+	if (hw->irq_callback)
+		hw->irq_callback(hw->irq_callback_data, status);
+
+	hw_write_20kx(hw, GIP, status);
+	return IRQ_HANDLED;
+}
+
+static int hw_card_start(struct hw *hw)
+{
+	int err;
+	struct pci_dev *pci = hw->pci;
+
+	err = pci_enable_device(pci);
+	if (err < 0)
+		return err;
+
+	/* Set DMA transfer mask */
+	if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 ||
+	    pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) {
+		printk(KERN_ERR "architecture does not support PCI "
+				"busmaster DMA with mask 0x%llx\n",
+		       CT_XFI_DMA_MASK);
+		err = -ENXIO;
+		goto error1;
+	}
+
+	err = pci_request_regions(pci, "XFi");
+	if (err < 0)
+		goto error1;
+
+	/* Switch to X-Fi mode from UAA mode if neeeded */
+	if (hw->model == CTUAA) {
+		err = uaa_to_xfi(pci);
+		if (err)
+			goto error2;
+
+		hw->io_base = pci_resource_start(pci, 5);
+	} else {
+		hw->io_base = pci_resource_start(pci, 0);
+	}
+
+	err = request_irq(pci->irq, ct_20k1_interrupt, IRQF_SHARED,
+			  "ctxfi", hw);
+	if (err < 0) {
+		printk(KERN_ERR "XFi: Cannot get irq %d\n", pci->irq);
+		goto error2;
+	}
+	hw->irq = pci->irq;
+
+	pci_set_master(pci);
+
+	return 0;
+
+error2:
+	pci_release_regions(pci);
+	hw->io_base = 0;
+error1:
+	pci_disable_device(pci);
+	return err;
+}
+
+static int hw_card_stop(struct hw *hw)
+{
+	/* TODO: Disable interrupt and so on... */
+	if (hw->irq >= 0)
+		synchronize_irq(hw->irq);
+	return 0;
+}
+
+static int hw_card_shutdown(struct hw *hw)
+{
+	if (hw->irq >= 0)
+		free_irq(hw->irq, hw);
+
+	hw->irq	= -1;
+
+	if (NULL != ((void *)hw->mem_base))
+		iounmap((void *)hw->mem_base);
+
+	hw->mem_base = (unsigned long)NULL;
+
+	if (hw->io_base)
+		pci_release_regions(hw->pci);
+
+	hw->io_base = 0;
+
+	pci_disable_device(hw->pci);
+
+	return 0;
+}
+
+static int hw_card_init(struct hw *hw, struct card_conf *info)
+{
+	int err;
+	unsigned int gctl;
+	u32 data;
+	struct dac_conf dac_info = {0};
+	struct adc_conf adc_info = {0};
+	struct daio_conf daio_info = {0};
+	struct trn_conf trn_info = {0};
+
+	/* Get PCI io port base address and do Hendrix switch if needed. */
+	if (!hw->io_base) {
+		err = hw_card_start(hw);
+		if (err)
+			return err;
+	}
+
+	/* PLL init */
+	err = hw_pll_init(hw, info->rsr);
+	if (err < 0)
+		return err;
+
+	/* kick off auto-init */
+	err = hw_auto_init(hw);
+	if (err < 0)
+		return err;
+
+	/* Enable audio ring */
+	gctl = hw_read_20kx(hw, GCTL);
+	set_field(&gctl, GCTL_EAC, 1);
+	set_field(&gctl, GCTL_DBP, 1);
+	set_field(&gctl, GCTL_TBP, 1);
+	set_field(&gctl, GCTL_FBP, 1);
+	set_field(&gctl, GCTL_ET, 1);
+	hw_write_20kx(hw, GCTL, gctl);
+	mdelay(10);
+
+	/* Reset all global pending interrupts */
+	hw_write_20kx(hw, GIE, 0);
+	/* Reset all SRC pending interrupts */
+	hw_write_20kx(hw, SRCIP, 0);
+	mdelay(30);
+
+	/* Detect the card ID and configure GPIO accordingly. */
+	switch (hw->model) {
+	case CTSB055X:
+		hw_write_20kx(hw, GPIOCTL, 0x13fe);
+		break;
+	case CTSB073X:
+		hw_write_20kx(hw, GPIOCTL, 0x00e6);
+		break;
+	case CTUAA:
+		hw_write_20kx(hw, GPIOCTL, 0x00c2);
+		break;
+	default:
+		hw_write_20kx(hw, GPIOCTL, 0x01e6);
+		break;
+	}
+
+	trn_info.vm_pgt_phys = info->vm_pgt_phys;
+	err = hw_trn_init(hw, &trn_info);
+	if (err < 0)
+		return err;
+
+	daio_info.msr = info->msr;
+	err = hw_daio_init(hw, &daio_info);
+	if (err < 0)
+		return err;
+
+	dac_info.msr = info->msr;
+	err = hw_dac_init(hw, &dac_info);
+	if (err < 0)
+		return err;
+
+	adc_info.msr = info->msr;
+	adc_info.input = ADC_LINEIN;
+	adc_info.mic20db = 0;
+	err = hw_adc_init(hw, &adc_info);
+	if (err < 0)
+		return err;
+
+	data = hw_read_20kx(hw, SRCMCTL);
+	data |= 0x1; /* Enables input from the audio ring */
+	hw_write_20kx(hw, SRCMCTL, data);
+
+	return 0;
+}
+
+static u32 hw_read_20kx(struct hw *hw, u32 reg)
+{
+	u32 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(
+		&container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags);
+	outl(reg, hw->io_base + 0x0);
+	value = inl(hw->io_base + 0x4);
+	spin_unlock_irqrestore(
+		&container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags);
+
+	return value;
+}
+
+static void hw_write_20kx(struct hw *hw, u32 reg, u32 data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(
+		&container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags);
+	outl(reg, hw->io_base + 0x0);
+	outl(data, hw->io_base + 0x4);
+	spin_unlock_irqrestore(
+		&container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags);
+
+}
+
+static u32 hw_read_pci(struct hw *hw, u32 reg)
+{
+	u32 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(
+		&container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags);
+	outl(reg, hw->io_base + 0x10);
+	value = inl(hw->io_base + 0x14);
+	spin_unlock_irqrestore(
+		&container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags);
+
+	return value;
+}
+
+static void hw_write_pci(struct hw *hw, u32 reg, u32 data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(
+		&container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags);
+	outl(reg, hw->io_base + 0x10);
+	outl(data, hw->io_base + 0x14);
+	spin_unlock_irqrestore(
+		&container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags);
+}
+
+static struct hw ct20k1_preset __devinitdata = {
+	.irq = -1,
+
+	.card_init = hw_card_init,
+	.card_stop = hw_card_stop,
+	.pll_init = hw_pll_init,
+	.is_adc_source_selected = hw_is_adc_input_selected,
+	.select_adc_source = hw_adc_input_select,
+	.have_digit_io_switch = hw_have_digit_io_switch,
+
+	.src_rsc_get_ctrl_blk = src_get_rsc_ctrl_blk,
+	.src_rsc_put_ctrl_blk = src_put_rsc_ctrl_blk,
+	.src_mgr_get_ctrl_blk = src_mgr_get_ctrl_blk,
+	.src_mgr_put_ctrl_blk = src_mgr_put_ctrl_blk,
+	.src_set_state = src_set_state,
+	.src_set_bm = src_set_bm,
+	.src_set_rsr = src_set_rsr,
+	.src_set_sf = src_set_sf,
+	.src_set_wr = src_set_wr,
+	.src_set_pm = src_set_pm,
+	.src_set_rom = src_set_rom,
+	.src_set_vo = src_set_vo,
+	.src_set_st = src_set_st,
+	.src_set_ie = src_set_ie,
+	.src_set_ilsz = src_set_ilsz,
+	.src_set_bp = src_set_bp,
+	.src_set_cisz = src_set_cisz,
+	.src_set_ca = src_set_ca,
+	.src_set_sa = src_set_sa,
+	.src_set_la = src_set_la,
+	.src_set_pitch = src_set_pitch,
+	.src_set_dirty = src_set_dirty,
+	.src_set_clear_zbufs = src_set_clear_zbufs,
+	.src_set_dirty_all = src_set_dirty_all,
+	.src_commit_write = src_commit_write,
+	.src_get_ca = src_get_ca,
+	.src_get_dirty = src_get_dirty,
+	.src_dirty_conj_mask = src_dirty_conj_mask,
+	.src_mgr_enbs_src = src_mgr_enbs_src,
+	.src_mgr_enb_src = src_mgr_enb_src,
+	.src_mgr_dsb_src = src_mgr_dsb_src,
+	.src_mgr_commit_write = src_mgr_commit_write,
+
+	.srcimp_mgr_get_ctrl_blk = srcimp_mgr_get_ctrl_blk,
+	.srcimp_mgr_put_ctrl_blk = srcimp_mgr_put_ctrl_blk,
+	.srcimp_mgr_set_imaparc = srcimp_mgr_set_imaparc,
+	.srcimp_mgr_set_imapuser = srcimp_mgr_set_imapuser,
+	.srcimp_mgr_set_imapnxt = srcimp_mgr_set_imapnxt,
+	.srcimp_mgr_set_imapaddr = srcimp_mgr_set_imapaddr,
+	.srcimp_mgr_commit_write = srcimp_mgr_commit_write,
+
+	.amixer_rsc_get_ctrl_blk = amixer_rsc_get_ctrl_blk,
+	.amixer_rsc_put_ctrl_blk = amixer_rsc_put_ctrl_blk,
+	.amixer_mgr_get_ctrl_blk = amixer_mgr_get_ctrl_blk,
+	.amixer_mgr_put_ctrl_blk = amixer_mgr_put_ctrl_blk,
+	.amixer_set_mode = amixer_set_mode,
+	.amixer_set_iv = amixer_set_iv,
+	.amixer_set_x = amixer_set_x,
+	.amixer_set_y = amixer_set_y,
+	.amixer_set_sadr = amixer_set_sadr,
+	.amixer_set_se = amixer_set_se,
+	.amixer_set_dirty = amixer_set_dirty,
+	.amixer_set_dirty_all = amixer_set_dirty_all,
+	.amixer_commit_write = amixer_commit_write,
+	.amixer_get_y = amixer_get_y,
+	.amixer_get_dirty = amixer_get_dirty,
+
+	.dai_get_ctrl_blk = dai_get_ctrl_blk,
+	.dai_put_ctrl_blk = dai_put_ctrl_blk,
+	.dai_srt_set_srco = dai_srt_set_srcr,
+	.dai_srt_set_srcm = dai_srt_set_srcl,
+	.dai_srt_set_rsr = dai_srt_set_rsr,
+	.dai_srt_set_drat = dai_srt_set_drat,
+	.dai_srt_set_ec = dai_srt_set_ec,
+	.dai_srt_set_et = dai_srt_set_et,
+	.dai_commit_write = dai_commit_write,
+
+	.dao_get_ctrl_blk = dao_get_ctrl_blk,
+	.dao_put_ctrl_blk = dao_put_ctrl_blk,
+	.dao_set_spos = dao_set_spos,
+	.dao_commit_write = dao_commit_write,
+	.dao_get_spos = dao_get_spos,
+
+	.daio_mgr_get_ctrl_blk = daio_mgr_get_ctrl_blk,
+	.daio_mgr_put_ctrl_blk = daio_mgr_put_ctrl_blk,
+	.daio_mgr_enb_dai = daio_mgr_enb_dai,
+	.daio_mgr_dsb_dai = daio_mgr_dsb_dai,
+	.daio_mgr_enb_dao = daio_mgr_enb_dao,
+	.daio_mgr_dsb_dao = daio_mgr_dsb_dao,
+	.daio_mgr_dao_init = daio_mgr_dao_init,
+	.daio_mgr_set_imaparc = daio_mgr_set_imaparc,
+	.daio_mgr_set_imapnxt = daio_mgr_set_imapnxt,
+	.daio_mgr_set_imapaddr = daio_mgr_set_imapaddr,
+	.daio_mgr_commit_write = daio_mgr_commit_write,
+
+	.set_timer_irq = set_timer_irq,
+	.set_timer_tick = set_timer_tick,
+	.get_wc = get_wc,
+};
+
+int __devinit create_20k1_hw_obj(struct hw **rhw)
+{
+	struct hw20k1 *hw20k1;
+
+	*rhw = NULL;
+	hw20k1 = kzalloc(sizeof(*hw20k1), GFP_KERNEL);
+	if (NULL == hw20k1)
+		return -ENOMEM;
+
+	spin_lock_init(&hw20k1->reg_20k1_lock);
+	spin_lock_init(&hw20k1->reg_pci_lock);
+
+	hw20k1->hw = ct20k1_preset;
+
+	*rhw = &hw20k1->hw;
+
+	return 0;
+}
+
+int destroy_20k1_hw_obj(struct hw *hw)
+{
+	if (hw->io_base)
+		hw_card_shutdown(hw);
+
+	kfree(container_of(hw, struct hw20k1, hw));
+	return 0;
+}
diff --git a/sound/pci/ctxfi/cthw20k1.h b/sound/pci/ctxfi/cthw20k1.h
new file mode 100644
index 0000000..02f72fb
--- /dev/null
+++ b/sound/pci/ctxfi/cthw20k1.h
@@ -0,0 +1,26 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthw20k1.h
+ *
+ * @Brief
+ * This file contains the definition of hardware access methord.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTHW20K1_H
+#define CTHW20K1_H
+
+#include "cthardware.h"
+
+int create_20k1_hw_obj(struct hw **rhw);
+int destroy_20k1_hw_obj(struct hw *hw);
+
+#endif /* CTHW20K1_H */
diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c
new file mode 100644
index 0000000..4493a51
--- /dev/null
+++ b/sound/pci/ctxfi/cthw20k2.c
@@ -0,0 +1,2137 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthw20k2.c
+ *
+ * @Brief
+ * This file contains the implementation of hardware access methord for 20k2.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 14 2008
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include "cthw20k2.h"
+#include "ct20k2reg.h"
+
+#if BITS_PER_LONG == 32
+#define CT_XFI_DMA_MASK		DMA_BIT_MASK(32) /* 32 bit PTE */
+#else
+#define CT_XFI_DMA_MASK		DMA_BIT_MASK(64) /* 64 bit PTE */
+#endif
+
+struct hw20k2 {
+	struct hw hw;
+	/* for i2c */
+	unsigned char dev_id;
+	unsigned char addr_size;
+	unsigned char data_size;
+};
+
+static u32 hw_read_20kx(struct hw *hw, u32 reg);
+static void hw_write_20kx(struct hw *hw, u32 reg, u32 data);
+
+/*
+ * Type definition block.
+ * The layout of control structures can be directly applied on 20k2 chip.
+ */
+
+/*
+ * SRC control block definitions.
+ */
+
+/* SRC resource control block */
+#define SRCCTL_STATE	0x00000007
+#define SRCCTL_BM	0x00000008
+#define SRCCTL_RSR	0x00000030
+#define SRCCTL_SF	0x000001C0
+#define SRCCTL_WR	0x00000200
+#define SRCCTL_PM	0x00000400
+#define SRCCTL_ROM	0x00001800
+#define SRCCTL_VO	0x00002000
+#define SRCCTL_ST	0x00004000
+#define SRCCTL_IE	0x00008000
+#define SRCCTL_ILSZ	0x000F0000
+#define SRCCTL_BP	0x00100000
+
+#define SRCCCR_CISZ	0x000007FF
+#define SRCCCR_CWA	0x001FF800
+#define SRCCCR_D	0x00200000
+#define SRCCCR_RS	0x01C00000
+#define SRCCCR_NAL	0x3E000000
+#define SRCCCR_RA	0xC0000000
+
+#define SRCCA_CA	0x0FFFFFFF
+#define SRCCA_RS	0xE0000000
+
+#define SRCSA_SA	0x0FFFFFFF
+
+#define SRCLA_LA	0x0FFFFFFF
+
+/* Mixer Parameter Ring ram Low and Hight register.
+ * Fixed-point value in 8.24 format for parameter channel */
+#define MPRLH_PITCH	0xFFFFFFFF
+
+/* SRC resource register dirty flags */
+union src_dirty {
+	struct {
+		u16 ctl:1;
+		u16 ccr:1;
+		u16 sa:1;
+		u16 la:1;
+		u16 ca:1;
+		u16 mpr:1;
+		u16 czbfs:1;	/* Clear Z-Buffers */
+		u16 rsv:9;
+	} bf;
+	u16 data;
+};
+
+struct src_rsc_ctrl_blk {
+	unsigned int	ctl;
+	unsigned int 	ccr;
+	unsigned int	ca;
+	unsigned int	sa;
+	unsigned int	la;
+	unsigned int	mpr;
+	union src_dirty	dirty;
+};
+
+/* SRC manager control block */
+union src_mgr_dirty {
+	struct {
+		u16 enb0:1;
+		u16 enb1:1;
+		u16 enb2:1;
+		u16 enb3:1;
+		u16 enb4:1;
+		u16 enb5:1;
+		u16 enb6:1;
+		u16 enb7:1;
+		u16 enbsa:1;
+		u16 rsv:7;
+	} bf;
+	u16 data;
+};
+
+struct src_mgr_ctrl_blk {
+	unsigned int		enbsa;
+	unsigned int		enb[8];
+	union src_mgr_dirty	dirty;
+};
+
+/* SRCIMP manager control block */
+#define SRCAIM_ARC	0x00000FFF
+#define SRCAIM_NXT	0x00FF0000
+#define SRCAIM_SRC	0xFF000000
+
+struct srcimap {
+	unsigned int srcaim;
+	unsigned int idx;
+};
+
+/* SRCIMP manager register dirty flags */
+union srcimp_mgr_dirty {
+	struct {
+		u16 srcimap:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+struct srcimp_mgr_ctrl_blk {
+	struct srcimap		srcimap;
+	union srcimp_mgr_dirty	dirty;
+};
+
+/*
+ * Function implementation block.
+ */
+
+static int src_get_rsc_ctrl_blk(void **rblk)
+{
+	struct src_rsc_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int src_put_rsc_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int src_set_state(void *blk, unsigned int state)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_STATE, state);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_bm(void *blk, unsigned int bm)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_BM, bm);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_rsr(void *blk, unsigned int rsr)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_RSR, rsr);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_sf(void *blk, unsigned int sf)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_SF, sf);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_wr(void *blk, unsigned int wr)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_WR, wr);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_pm(void *blk, unsigned int pm)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_PM, pm);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_rom(void *blk, unsigned int rom)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ROM, rom);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_vo(void *blk, unsigned int vo)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_VO, vo);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_st(void *blk, unsigned int st)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ST, st);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_ie(void *blk, unsigned int ie)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_IE, ie);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_ilsz(void *blk, unsigned int ilsz)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ILSZ, ilsz);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_bp(void *blk, unsigned int bp)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_BP, bp);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_cisz(void *blk, unsigned int cisz)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ccr, SRCCCR_CISZ, cisz);
+	ctl->dirty.bf.ccr = 1;
+	return 0;
+}
+
+static int src_set_ca(void *blk, unsigned int ca)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ca, SRCCA_CA, ca);
+	ctl->dirty.bf.ca = 1;
+	return 0;
+}
+
+static int src_set_sa(void *blk, unsigned int sa)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->sa, SRCSA_SA, sa);
+	ctl->dirty.bf.sa = 1;
+	return 0;
+}
+
+static int src_set_la(void *blk, unsigned int la)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->la, SRCLA_LA, la);
+	ctl->dirty.bf.la = 1;
+	return 0;
+}
+
+static int src_set_pitch(void *blk, unsigned int pitch)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->mpr, MPRLH_PITCH, pitch);
+	ctl->dirty.bf.mpr = 1;
+	return 0;
+}
+
+static int src_set_clear_zbufs(void *blk, unsigned int clear)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.bf.czbfs = (clear ? 1 : 0);
+	return 0;
+}
+
+static int src_set_dirty(void *blk, unsigned int flags)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff);
+	return 0;
+}
+
+static int src_set_dirty_all(void *blk)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0);
+	return 0;
+}
+
+#define AR_SLOT_SIZE		4096
+#define AR_SLOT_BLOCK_SIZE	16
+#define AR_PTS_PITCH		6
+#define AR_PARAM_SRC_OFFSET	0x60
+
+static unsigned int src_param_pitch_mixer(unsigned int src_idx)
+{
+	return ((src_idx << 4) + AR_PTS_PITCH + AR_SLOT_SIZE
+			- AR_PARAM_SRC_OFFSET) % AR_SLOT_SIZE;
+
+}
+
+static int src_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+	int i;
+
+	if (ctl->dirty.bf.czbfs) {
+		/* Clear Z-Buffer registers */
+		for (i = 0; i < 8; i++)
+			hw_write_20kx(hw, SRC_UPZ+idx*0x100+i*0x4, 0);
+
+		for (i = 0; i < 4; i++)
+			hw_write_20kx(hw, SRC_DN0Z+idx*0x100+i*0x4, 0);
+
+		for (i = 0; i < 8; i++)
+			hw_write_20kx(hw, SRC_DN1Z+idx*0x100+i*0x4, 0);
+
+		ctl->dirty.bf.czbfs = 0;
+	}
+	if (ctl->dirty.bf.mpr) {
+		/* Take the parameter mixer resource in the same group as that
+		 * the idx src is in for simplicity. Unlike src, all conjugate
+		 * parameter mixer resources must be programmed for
+		 * corresponding conjugate src resources. */
+		unsigned int pm_idx = src_param_pitch_mixer(idx);
+		hw_write_20kx(hw, MIXER_PRING_LO_HI+4*pm_idx, ctl->mpr);
+		hw_write_20kx(hw, MIXER_PMOPLO+8*pm_idx, 0x3);
+		hw_write_20kx(hw, MIXER_PMOPHI+8*pm_idx, 0x0);
+		ctl->dirty.bf.mpr = 0;
+	}
+	if (ctl->dirty.bf.sa) {
+		hw_write_20kx(hw, SRC_SA+idx*0x100, ctl->sa);
+		ctl->dirty.bf.sa = 0;
+	}
+	if (ctl->dirty.bf.la) {
+		hw_write_20kx(hw, SRC_LA+idx*0x100, ctl->la);
+		ctl->dirty.bf.la = 0;
+	}
+	if (ctl->dirty.bf.ca) {
+		hw_write_20kx(hw, SRC_CA+idx*0x100, ctl->ca);
+		ctl->dirty.bf.ca = 0;
+	}
+
+	/* Write srccf register */
+	hw_write_20kx(hw, SRC_CF+idx*0x100, 0x0);
+
+	if (ctl->dirty.bf.ccr) {
+		hw_write_20kx(hw, SRC_CCR+idx*0x100, ctl->ccr);
+		ctl->dirty.bf.ccr = 0;
+	}
+	if (ctl->dirty.bf.ctl) {
+		hw_write_20kx(hw, SRC_CTL+idx*0x100, ctl->ctl);
+		ctl->dirty.bf.ctl = 0;
+	}
+
+	return 0;
+}
+
+static int src_get_ca(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	ctl->ca = hw_read_20kx(hw, SRC_CA+idx*0x100);
+	ctl->dirty.bf.ca = 0;
+
+	return get_field(ctl->ca, SRCCA_CA);
+}
+
+static unsigned int src_get_dirty(void *blk)
+{
+	return ((struct src_rsc_ctrl_blk *)blk)->dirty.data;
+}
+
+static unsigned int src_dirty_conj_mask(void)
+{
+	return 0x20;
+}
+
+static int src_mgr_enbs_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enbsa |= (0x1 << ((idx%128)/4));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.bf.enbsa = 1;
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32));
+	return 0;
+}
+
+static int src_mgr_enb_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32));
+	return 0;
+}
+
+static int src_mgr_dsb_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] &= ~(0x1 << (idx%32));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32));
+	return 0;
+}
+
+static int src_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct src_mgr_ctrl_blk *ctl = blk;
+	int i;
+	unsigned int ret;
+
+	if (ctl->dirty.bf.enbsa) {
+		do {
+			ret = hw_read_20kx(hw, SRC_ENBSTAT);
+		} while (ret & 0x1);
+		hw_write_20kx(hw, SRC_ENBSA, ctl->enbsa);
+		ctl->dirty.bf.enbsa = 0;
+	}
+	for (i = 0; i < 8; i++) {
+		if ((ctl->dirty.data & (0x1 << i))) {
+			hw_write_20kx(hw, SRC_ENB+(i*0x100), ctl->enb[i]);
+			ctl->dirty.data &= ~(0x1 << i);
+		}
+	}
+
+	return 0;
+}
+
+static int src_mgr_get_ctrl_blk(void **rblk)
+{
+	struct src_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int src_mgr_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int srcimp_mgr_get_ctrl_blk(void **rblk)
+{
+	struct srcimp_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int srcimp_mgr_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int srcimp_mgr_set_imaparc(void *blk, unsigned int slot)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_ARC, slot);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapuser(void *blk, unsigned int user)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_SRC, user);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapnxt(void *blk, unsigned int next)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_NXT, next);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapaddr(void *blk, unsigned int addr)
+{
+	((struct srcimp_mgr_ctrl_blk *)blk)->srcimap.idx = addr;
+	((struct srcimp_mgr_ctrl_blk *)blk)->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.srcimap) {
+		hw_write_20kx(hw, SRC_IMAP+ctl->srcimap.idx*0x100,
+						ctl->srcimap.srcaim);
+		ctl->dirty.bf.srcimap = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * AMIXER control block definitions.
+ */
+
+#define AMOPLO_M	0x00000003
+#define AMOPLO_IV	0x00000004
+#define AMOPLO_X	0x0003FFF0
+#define AMOPLO_Y	0xFFFC0000
+
+#define AMOPHI_SADR	0x000000FF
+#define AMOPHI_SE	0x80000000
+
+/* AMIXER resource register dirty flags */
+union amixer_dirty {
+	struct {
+		u16 amoplo:1;
+		u16 amophi:1;
+		u16 rsv:14;
+	} bf;
+	u16 data;
+};
+
+/* AMIXER resource control block */
+struct amixer_rsc_ctrl_blk {
+	unsigned int		amoplo;
+	unsigned int		amophi;
+	union amixer_dirty	dirty;
+};
+
+static int amixer_set_mode(void *blk, unsigned int mode)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_M, mode);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_iv(void *blk, unsigned int iv)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_IV, iv);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_x(void *blk, unsigned int x)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_X, x);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_y(void *blk, unsigned int y)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_Y, y);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_sadr(void *blk, unsigned int sadr)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amophi, AMOPHI_SADR, sadr);
+	ctl->dirty.bf.amophi = 1;
+	return 0;
+}
+
+static int amixer_set_se(void *blk, unsigned int se)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amophi, AMOPHI_SE, se);
+	ctl->dirty.bf.amophi = 1;
+	return 0;
+}
+
+static int amixer_set_dirty(void *blk, unsigned int flags)
+{
+	((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff);
+	return 0;
+}
+
+static int amixer_set_dirty_all(void *blk)
+{
+	((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0);
+	return 0;
+}
+
+static int amixer_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.amoplo || ctl->dirty.bf.amophi) {
+		hw_write_20kx(hw, MIXER_AMOPLO+idx*8, ctl->amoplo);
+		ctl->dirty.bf.amoplo = 0;
+		hw_write_20kx(hw, MIXER_AMOPHI+idx*8, ctl->amophi);
+		ctl->dirty.bf.amophi = 0;
+	}
+
+	return 0;
+}
+
+static int amixer_get_y(void *blk)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	return get_field(ctl->amoplo, AMOPLO_Y);
+}
+
+static unsigned int amixer_get_dirty(void *blk)
+{
+	return ((struct amixer_rsc_ctrl_blk *)blk)->dirty.data;
+}
+
+static int amixer_rsc_get_ctrl_blk(void **rblk)
+{
+	struct amixer_rsc_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int amixer_rsc_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int amixer_mgr_get_ctrl_blk(void **rblk)
+{
+	*rblk = NULL;
+
+	return 0;
+}
+
+static int amixer_mgr_put_ctrl_blk(void *blk)
+{
+	return 0;
+}
+
+/*
+ * DAIO control block definitions.
+ */
+
+/* Receiver Sample Rate Tracker Control register */
+#define SRTCTL_SRCO	0x000000FF
+#define SRTCTL_SRCM	0x0000FF00
+#define SRTCTL_RSR	0x00030000
+#define SRTCTL_DRAT	0x00300000
+#define SRTCTL_EC	0x01000000
+#define SRTCTL_ET	0x10000000
+
+/* DAIO Receiver register dirty flags */
+union dai_dirty {
+	struct {
+		u16 srt:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+/* DAIO Receiver control block */
+struct dai_ctrl_blk {
+	unsigned int	srt;
+	union dai_dirty	dirty;
+};
+
+/* Audio Input Mapper RAM */
+#define AIM_ARC		0x00000FFF
+#define AIM_NXT		0x007F0000
+
+struct daoimap {
+	unsigned int aim;
+	unsigned int idx;
+};
+
+/* Audio Transmitter Control and Status register */
+#define ATXCTL_EN	0x00000001
+#define ATXCTL_MODE	0x00000010
+#define ATXCTL_CD	0x00000020
+#define ATXCTL_RAW	0x00000100
+#define ATXCTL_MT	0x00000200
+#define ATXCTL_NUC	0x00003000
+#define ATXCTL_BEN	0x00010000
+#define ATXCTL_BMUX	0x00700000
+#define ATXCTL_B24	0x01000000
+#define ATXCTL_CPF	0x02000000
+#define ATXCTL_RIV	0x10000000
+#define ATXCTL_LIV	0x20000000
+#define ATXCTL_RSAT	0x40000000
+#define ATXCTL_LSAT	0x80000000
+
+/* XDIF Transmitter register dirty flags */
+union dao_dirty {
+	struct {
+		u16 atxcsl:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+/* XDIF Transmitter control block */
+struct dao_ctrl_blk {
+	/* XDIF Transmitter Channel Status Low Register */
+	unsigned int	atxcsl;
+	union dao_dirty	dirty;
+};
+
+/* Audio Receiver Control register */
+#define ARXCTL_EN	0x00000001
+
+/* DAIO manager register dirty flags */
+union daio_mgr_dirty {
+	struct {
+		u32 atxctl:8;
+		u32 arxctl:8;
+		u32 daoimap:1;
+		u32 rsv:15;
+	} bf;
+	u32 data;
+};
+
+/* DAIO manager control block */
+struct daio_mgr_ctrl_blk {
+	struct daoimap		daoimap;
+	unsigned int		txctl[8];
+	unsigned int		rxctl[8];
+	union daio_mgr_dirty	dirty;
+};
+
+static int dai_srt_set_srco(void *blk, unsigned int src)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_SRCO, src);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_srcm(void *blk, unsigned int src)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_SRCM, src);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_rsr(void *blk, unsigned int rsr)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_RSR, rsr);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_drat(void *blk, unsigned int drat)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_DRAT, drat);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_ec(void *blk, unsigned int ec)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_EC, ec ? 1 : 0);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_et(void *blk, unsigned int et)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_ET, et ? 1 : 0);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.srt) {
+		hw_write_20kx(hw, AUDIO_IO_RX_SRT_CTL+0x40*idx, ctl->srt);
+		ctl->dirty.bf.srt = 0;
+	}
+
+	return 0;
+}
+
+static int dai_get_ctrl_blk(void **rblk)
+{
+	struct dai_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int dai_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int dao_set_spos(void *blk, unsigned int spos)
+{
+	((struct dao_ctrl_blk *)blk)->atxcsl = spos;
+	((struct dao_ctrl_blk *)blk)->dirty.bf.atxcsl = 1;
+	return 0;
+}
+
+static int dao_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct dao_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.atxcsl) {
+		if (idx < 4) {
+			/* S/PDIF SPOSx */
+			hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_L+0x40*idx,
+							ctl->atxcsl);
+		}
+		ctl->dirty.bf.atxcsl = 0;
+	}
+
+	return 0;
+}
+
+static int dao_get_spos(void *blk, unsigned int *spos)
+{
+	*spos = ((struct dao_ctrl_blk *)blk)->atxcsl;
+	return 0;
+}
+
+static int dao_get_ctrl_blk(void **rblk)
+{
+	struct dao_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int dao_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int daio_mgr_enb_dai(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->rxctl[idx], ARXCTL_EN, 1);
+	ctl->dirty.bf.arxctl |= (0x1 << idx);
+	return 0;
+}
+
+static int daio_mgr_dsb_dai(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->rxctl[idx], ARXCTL_EN, 0);
+
+	ctl->dirty.bf.arxctl |= (0x1 << idx);
+	return 0;
+}
+
+static int daio_mgr_enb_dao(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->txctl[idx], ATXCTL_EN, 1);
+	ctl->dirty.bf.atxctl |= (0x1 << idx);
+	return 0;
+}
+
+static int daio_mgr_dsb_dao(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->txctl[idx], ATXCTL_EN, 0);
+	ctl->dirty.bf.atxctl |= (0x1 << idx);
+	return 0;
+}
+
+static int daio_mgr_dao_init(void *blk, unsigned int idx, unsigned int conf)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF output */
+		switch ((conf & 0x7)) {
+		case 1:
+			set_field(&ctl->txctl[idx], ATXCTL_NUC, 0);
+			break;
+		case 2:
+			set_field(&ctl->txctl[idx], ATXCTL_NUC, 1);
+			break;
+		case 4:
+			set_field(&ctl->txctl[idx], ATXCTL_NUC, 2);
+			break;
+		case 8:
+			set_field(&ctl->txctl[idx], ATXCTL_NUC, 3);
+			break;
+		default:
+			break;
+		}
+		/* CDIF */
+		set_field(&ctl->txctl[idx], ATXCTL_CD, (!(conf & 0x7)));
+		/* Non-audio */
+		set_field(&ctl->txctl[idx], ATXCTL_LIV, (conf >> 4) & 0x1);
+		/* Non-audio */
+		set_field(&ctl->txctl[idx], ATXCTL_RIV, (conf >> 4) & 0x1);
+		set_field(&ctl->txctl[idx], ATXCTL_RAW,
+			  ((conf >> 3) & 0x1) ? 0 : 0);
+		ctl->dirty.bf.atxctl |= (0x1 << idx);
+	} else {
+		/* I2S output */
+		/*idx %= 4; */
+	}
+	return 0;
+}
+
+static int daio_mgr_set_imaparc(void *blk, unsigned int slot)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->daoimap.aim, AIM_ARC, slot);
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_set_imapnxt(void *blk, unsigned int next)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->daoimap.aim, AIM_NXT, next);
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_set_imapaddr(void *blk, unsigned int addr)
+{
+	((struct daio_mgr_ctrl_blk *)blk)->daoimap.idx = addr;
+	((struct daio_mgr_ctrl_blk *)blk)->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+	unsigned int data;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		if ((ctl->dirty.bf.atxctl & (0x1 << i))) {
+			data = ctl->txctl[i];
+			hw_write_20kx(hw, (AUDIO_IO_TX_CTL+(0x40*i)), data);
+			ctl->dirty.bf.atxctl &= ~(0x1 << i);
+			mdelay(1);
+		}
+		if ((ctl->dirty.bf.arxctl & (0x1 << i))) {
+			data = ctl->rxctl[i];
+			hw_write_20kx(hw, (AUDIO_IO_RX_CTL+(0x40*i)), data);
+			ctl->dirty.bf.arxctl &= ~(0x1 << i);
+			mdelay(1);
+		}
+	}
+	if (ctl->dirty.bf.daoimap) {
+		hw_write_20kx(hw, AUDIO_IO_AIM+ctl->daoimap.idx*4,
+						ctl->daoimap.aim);
+		ctl->dirty.bf.daoimap = 0;
+	}
+
+	return 0;
+}
+
+static int daio_mgr_get_ctrl_blk(struct hw *hw, void **rblk)
+{
+	struct daio_mgr_ctrl_blk *blk;
+	int i;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	for (i = 0; i < 8; i++) {
+		blk->txctl[i] = hw_read_20kx(hw, AUDIO_IO_TX_CTL+(0x40*i));
+		blk->rxctl[i] = hw_read_20kx(hw, AUDIO_IO_RX_CTL+(0x40*i));
+	}
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int daio_mgr_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+/* Card hardware initialization block */
+struct dac_conf {
+	unsigned int msr; /* master sample rate in rsrs */
+};
+
+struct adc_conf {
+	unsigned int msr; 	/* master sample rate in rsrs */
+	unsigned char input; 	/* the input source of ADC */
+	unsigned char mic20db; 	/* boost mic by 20db if input is microphone */
+};
+
+struct daio_conf {
+	unsigned int msr; /* master sample rate in rsrs */
+};
+
+struct trn_conf {
+	unsigned long vm_pgt_phys;
+};
+
+static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
+{
+	u32 data;
+	int i;
+
+	/* Program I2S with proper sample rate and enable the correct I2S
+	 * channel. ED(0/8/16/24): Enable all I2S/I2X master clock output */
+	if (1 == info->msr) {
+		hw_write_20kx(hw, AUDIO_IO_MCLK, 0x01010101);
+		hw_write_20kx(hw, AUDIO_IO_TX_BLRCLK, 0x01010101);
+		hw_write_20kx(hw, AUDIO_IO_RX_BLRCLK, 0);
+	} else if (2 == info->msr) {
+		hw_write_20kx(hw, AUDIO_IO_MCLK, 0x11111111);
+		/* Specify all playing 96khz
+		 * EA [0]	- Enabled
+		 * RTA [4:5]	- 96kHz
+		 * EB [8]	- Enabled
+		 * RTB [12:13]	- 96kHz
+		 * EC [16]	- Enabled
+		 * RTC [20:21]	- 96kHz
+		 * ED [24]	- Enabled
+		 * RTD [28:29]	- 96kHz */
+		hw_write_20kx(hw, AUDIO_IO_TX_BLRCLK, 0x11111111);
+		hw_write_20kx(hw, AUDIO_IO_RX_BLRCLK, 0);
+	} else {
+		printk(KERN_ALERT "ctxfi: ERROR!!! Invalid sampling rate!!!\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < 8; i++) {
+		if (i <= 3) {
+			/* 1st 3 channels are SPDIFs (SB0960) */
+			if (i == 3)
+				data = 0x1001001;
+			else
+				data = 0x1000001;
+
+			hw_write_20kx(hw, (AUDIO_IO_TX_CTL+(0x40*i)), data);
+			hw_write_20kx(hw, (AUDIO_IO_RX_CTL+(0x40*i)), data);
+
+			/* Initialize the SPDIF Out Channel status registers.
+			 * The value specified here is based on the typical
+			 * values provided in the specification, namely: Clock
+			 * Accuracy of 1000ppm, Sample Rate of 48KHz,
+			 * unspecified source number, Generation status = 1,
+			 * Category code = 0x12 (Digital Signal Mixer),
+			 * Mode = 0, Emph = 0, Copy Permitted, AN = 0
+			 * (indicating that we're transmitting digital audio,
+			 * and the Professional Use bit is 0. */
+
+			hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_L+(0x40*i),
+					0x02109204); /* Default to 48kHz */
+
+			hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_H+(0x40*i), 0x0B);
+		} else {
+			/* Next 5 channels are I2S (SB0960) */
+			data = 0x11;
+			hw_write_20kx(hw, AUDIO_IO_RX_CTL+(0x40*i), data);
+			if (2 == info->msr) {
+				/* Four channels per sample period */
+				data |= 0x1000;
+			}
+			hw_write_20kx(hw, AUDIO_IO_TX_CTL+(0x40*i), data);
+		}
+	}
+
+	return 0;
+}
+
+/* TRANSPORT operations */
+static int hw_trn_init(struct hw *hw, const struct trn_conf *info)
+{
+	u32 vmctl, data;
+	u32 ptp_phys_low, ptp_phys_high;
+	int i;
+
+	/* Set up device page table */
+	if ((~0UL) == info->vm_pgt_phys) {
+		printk(KERN_ALERT "ctxfi: "
+		       "Wrong device page table page address!!!\n");
+		return -1;
+	}
+
+	vmctl = 0x80000C0F;  /* 32-bit, 4k-size page */
+	ptp_phys_low = (u32)info->vm_pgt_phys;
+	ptp_phys_high = upper_32_bits(info->vm_pgt_phys);
+	if (sizeof(void *) == 8) /* 64bit address */
+		vmctl |= (3 << 8);
+	/* Write page table physical address to all PTPAL registers */
+	for (i = 0; i < 64; i++) {
+		hw_write_20kx(hw, VMEM_PTPAL+(16*i), ptp_phys_low);
+		hw_write_20kx(hw, VMEM_PTPAH+(16*i), ptp_phys_high);
+	}
+	/* Enable virtual memory transfer */
+	hw_write_20kx(hw, VMEM_CTL, vmctl);
+	/* Enable transport bus master and queueing of request */
+	hw_write_20kx(hw, TRANSPORT_CTL, 0x03);
+	hw_write_20kx(hw, TRANSPORT_INT, 0x200c01);
+	/* Enable transport ring */
+	data = hw_read_20kx(hw, TRANSPORT_ENB);
+	hw_write_20kx(hw, TRANSPORT_ENB, (data | 0x03));
+
+	return 0;
+}
+
+/* Card initialization */
+#define GCTL_AIE	0x00000001
+#define GCTL_UAA	0x00000002
+#define GCTL_DPC	0x00000004
+#define GCTL_DBP	0x00000008
+#define GCTL_ABP	0x00000010
+#define GCTL_TBP	0x00000020
+#define GCTL_SBP	0x00000040
+#define GCTL_FBP	0x00000080
+#define GCTL_ME		0x00000100
+#define GCTL_AID	0x00001000
+
+#define PLLCTL_SRC	0x00000007
+#define PLLCTL_SPE	0x00000008
+#define PLLCTL_RD	0x000000F0
+#define PLLCTL_FD	0x0001FF00
+#define PLLCTL_OD	0x00060000
+#define PLLCTL_B	0x00080000
+#define PLLCTL_AS	0x00100000
+#define PLLCTL_LF	0x03E00000
+#define PLLCTL_SPS	0x1C000000
+#define PLLCTL_AD	0x60000000
+
+#define PLLSTAT_CCS	0x00000007
+#define PLLSTAT_SPL	0x00000008
+#define PLLSTAT_CRD	0x000000F0
+#define PLLSTAT_CFD	0x0001FF00
+#define PLLSTAT_SL	0x00020000
+#define PLLSTAT_FAS	0x00040000
+#define PLLSTAT_B	0x00080000
+#define PLLSTAT_PD	0x00100000
+#define PLLSTAT_OCA	0x00200000
+#define PLLSTAT_NCA	0x00400000
+
+static int hw_pll_init(struct hw *hw, unsigned int rsr)
+{
+	unsigned int pllenb;
+	unsigned int pllctl;
+	unsigned int pllstat;
+	int i;
+
+	pllenb = 0xB;
+	hw_write_20kx(hw, PLL_ENB, pllenb);
+	pllctl = 0x20D00000;
+	set_field(&pllctl, PLLCTL_FD, 16 - 4);
+	hw_write_20kx(hw, PLL_CTL, pllctl);
+	mdelay(40);
+	pllctl = hw_read_20kx(hw, PLL_CTL);
+	set_field(&pllctl, PLLCTL_B, 0);
+	if (48000 == rsr) {
+		set_field(&pllctl, PLLCTL_FD, 16 - 2);
+		set_field(&pllctl, PLLCTL_RD, 1 - 1);
+	} else { /* 44100 */
+		set_field(&pllctl, PLLCTL_FD, 147 - 2);
+		set_field(&pllctl, PLLCTL_RD, 10 - 1);
+	}
+	hw_write_20kx(hw, PLL_CTL, pllctl);
+	mdelay(40);
+	for (i = 0; i < 1000; i++) {
+		pllstat = hw_read_20kx(hw, PLL_STAT);
+		if (get_field(pllstat, PLLSTAT_PD))
+			continue;
+
+		if (get_field(pllstat, PLLSTAT_B) !=
+					get_field(pllctl, PLLCTL_B))
+			continue;
+
+		if (get_field(pllstat, PLLSTAT_CCS) !=
+					get_field(pllctl, PLLCTL_SRC))
+			continue;
+
+		if (get_field(pllstat, PLLSTAT_CRD) !=
+					get_field(pllctl, PLLCTL_RD))
+			continue;
+
+		if (get_field(pllstat, PLLSTAT_CFD) !=
+					get_field(pllctl, PLLCTL_FD))
+			continue;
+
+		break;
+	}
+	if (i >= 1000) {
+		printk(KERN_ALERT "ctxfi: PLL initialization failed!!!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int hw_auto_init(struct hw *hw)
+{
+	unsigned int gctl;
+	int i;
+
+	gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL);
+	set_field(&gctl, GCTL_AIE, 0);
+	hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
+	set_field(&gctl, GCTL_AIE, 1);
+	hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
+	mdelay(10);
+	for (i = 0; i < 400000; i++) {
+		gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL);
+		if (get_field(gctl, GCTL_AID))
+			break;
+	}
+	if (!get_field(gctl, GCTL_AID)) {
+		printk(KERN_ALERT "ctxfi: Card Auto-init failed!!!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+/* DAC operations */
+
+#define CS4382_MC1 		0x1
+#define CS4382_MC2 		0x2
+#define CS4382_MC3		0x3
+#define CS4382_FC		0x4
+#define CS4382_IC		0x5
+#define CS4382_XC1		0x6
+#define CS4382_VCA1 		0x7
+#define CS4382_VCB1 		0x8
+#define CS4382_XC2		0x9
+#define CS4382_VCA2 		0xA
+#define CS4382_VCB2 		0xB
+#define CS4382_XC3		0xC
+#define CS4382_VCA3		0xD
+#define CS4382_VCB3		0xE
+#define CS4382_XC4 		0xF
+#define CS4382_VCA4 		0x10
+#define CS4382_VCB4 		0x11
+#define CS4382_CREV 		0x12
+
+/* I2C status */
+#define STATE_LOCKED		0x00
+#define STATE_UNLOCKED		0xAA
+#define DATA_READY		0x800000    /* Used with I2C_IF_STATUS */
+#define DATA_ABORT		0x10000     /* Used with I2C_IF_STATUS */
+
+#define I2C_STATUS_DCM	0x00000001
+#define I2C_STATUS_BC	0x00000006
+#define I2C_STATUS_APD	0x00000008
+#define I2C_STATUS_AB	0x00010000
+#define I2C_STATUS_DR	0x00800000
+
+#define I2C_ADDRESS_PTAD	0x0000FFFF
+#define I2C_ADDRESS_SLAD	0x007F0000
+
+struct regs_cs4382 {
+	u32 mode_control_1;
+	u32 mode_control_2;
+	u32 mode_control_3;
+
+	u32 filter_control;
+	u32 invert_control;
+
+	u32 mix_control_P1;
+	u32 vol_control_A1;
+	u32 vol_control_B1;
+
+	u32 mix_control_P2;
+	u32 vol_control_A2;
+	u32 vol_control_B2;
+
+	u32 mix_control_P3;
+	u32 vol_control_A3;
+	u32 vol_control_B3;
+
+	u32 mix_control_P4;
+	u32 vol_control_A4;
+	u32 vol_control_B4;
+};
+
+static int hw20k2_i2c_unlock_full_access(struct hw *hw)
+{
+	u8 UnlockKeySequence_FLASH_FULLACCESS_MODE[2] =  {0xB3, 0xD4};
+
+	/* Send keys for forced BIOS mode */
+	hw_write_20kx(hw, I2C_IF_WLOCK,
+			UnlockKeySequence_FLASH_FULLACCESS_MODE[0]);
+	hw_write_20kx(hw, I2C_IF_WLOCK,
+			UnlockKeySequence_FLASH_FULLACCESS_MODE[1]);
+	/* Check whether the chip is unlocked */
+	if (hw_read_20kx(hw, I2C_IF_WLOCK) == STATE_UNLOCKED)
+		return 0;
+
+	return -1;
+}
+
+static int hw20k2_i2c_lock_chip(struct hw *hw)
+{
+	/* Write twice */
+	hw_write_20kx(hw, I2C_IF_WLOCK, STATE_LOCKED);
+	hw_write_20kx(hw, I2C_IF_WLOCK, STATE_LOCKED);
+	if (hw_read_20kx(hw, I2C_IF_WLOCK) == STATE_LOCKED)
+		return 0;
+
+	return -1;
+}
+
+static int hw20k2_i2c_init(struct hw *hw, u8 dev_id, u8 addr_size, u8 data_size)
+{
+	struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
+	int err;
+	unsigned int i2c_status;
+	unsigned int i2c_addr;
+
+	err = hw20k2_i2c_unlock_full_access(hw);
+	if (err < 0)
+		return err;
+
+	hw20k2->addr_size = addr_size;
+	hw20k2->data_size = data_size;
+	hw20k2->dev_id = dev_id;
+
+	i2c_addr = 0;
+	set_field(&i2c_addr, I2C_ADDRESS_SLAD, dev_id);
+
+	hw_write_20kx(hw, I2C_IF_ADDRESS, i2c_addr);
+
+	i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
+
+	set_field(&i2c_status, I2C_STATUS_DCM, 1); /* Direct control mode */
+
+	hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
+
+	return 0;
+}
+
+static int hw20k2_i2c_uninit(struct hw *hw)
+{
+	unsigned int i2c_status;
+	unsigned int i2c_addr;
+
+	i2c_addr = 0;
+	set_field(&i2c_addr, I2C_ADDRESS_SLAD, 0x57); /* I2C id */
+
+	hw_write_20kx(hw, I2C_IF_ADDRESS, i2c_addr);
+
+	i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
+
+	set_field(&i2c_status, I2C_STATUS_DCM, 0); /* I2C mode */
+
+	hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
+
+	return hw20k2_i2c_lock_chip(hw);
+}
+
+static int hw20k2_i2c_wait_data_ready(struct hw *hw)
+{
+	int i = 0x400000;
+	unsigned int ret;
+
+	do {
+		ret = hw_read_20kx(hw, I2C_IF_STATUS);
+	} while ((!(ret & DATA_READY)) && --i);
+
+	return i;
+}
+
+static int hw20k2_i2c_read(struct hw *hw, u16 addr, u32 *datap)
+{
+	struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
+	unsigned int i2c_status;
+
+	i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
+	set_field(&i2c_status, I2C_STATUS_BC,
+		  (4 == hw20k2->addr_size) ? 0 : hw20k2->addr_size);
+	hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
+	if (!hw20k2_i2c_wait_data_ready(hw))
+		return -1;
+
+	hw_write_20kx(hw, I2C_IF_WDATA, addr);
+	if (!hw20k2_i2c_wait_data_ready(hw))
+		return -1;
+
+	/* Force a read operation */
+	hw_write_20kx(hw, I2C_IF_RDATA, 0);
+	if (!hw20k2_i2c_wait_data_ready(hw))
+		return -1;
+
+	*datap = hw_read_20kx(hw, I2C_IF_RDATA);
+
+	return 0;
+}
+
+static int hw20k2_i2c_write(struct hw *hw, u16 addr, u32 data)
+{
+	struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
+	unsigned int i2c_data = (data << (hw20k2->addr_size * 8)) | addr;
+	unsigned int i2c_status;
+
+	i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
+
+	set_field(&i2c_status, I2C_STATUS_BC,
+		  (4 == (hw20k2->addr_size + hw20k2->data_size)) ?
+		  0 : (hw20k2->addr_size + hw20k2->data_size));
+
+	hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
+	hw20k2_i2c_wait_data_ready(hw);
+	/* Dummy write to trigger the write oprtation */
+	hw_write_20kx(hw, I2C_IF_WDATA, 0);
+	hw20k2_i2c_wait_data_ready(hw);
+
+	/* This is the real data */
+	hw_write_20kx(hw, I2C_IF_WDATA, i2c_data);
+	hw20k2_i2c_wait_data_ready(hw);
+
+	return 0;
+}
+
+static int hw_dac_init(struct hw *hw, const struct dac_conf *info)
+{
+	int err;
+	u32 data;
+	int i;
+	struct regs_cs4382 cs_read = {0};
+	struct regs_cs4382 cs_def = {
+				   0x00000001,  /* Mode Control 1 */
+				   0x00000000,  /* Mode Control 2 */
+				   0x00000084,  /* Mode Control 3 */
+				   0x00000000,  /* Filter Control */
+				   0x00000000,  /* Invert Control */
+				   0x00000024,  /* Mixing Control Pair 1 */
+				   0x00000000,  /* Vol Control A1 */
+				   0x00000000,  /* Vol Control B1 */
+				   0x00000024,  /* Mixing Control Pair 2 */
+				   0x00000000,  /* Vol Control A2 */
+				   0x00000000,  /* Vol Control B2 */
+				   0x00000024,  /* Mixing Control Pair 3 */
+				   0x00000000,  /* Vol Control A3 */
+				   0x00000000,  /* Vol Control B3 */
+				   0x00000024,  /* Mixing Control Pair 4 */
+				   0x00000000,  /* Vol Control A4 */
+				   0x00000000   /* Vol Control B4 */
+				 };
+
+	/* Set DAC reset bit as output */
+	data = hw_read_20kx(hw, GPIO_CTRL);
+	data |= 0x02;
+	hw_write_20kx(hw, GPIO_CTRL, data);
+
+	err = hw20k2_i2c_init(hw, 0x18, 1, 1);
+	if (err < 0)
+		goto End;
+
+	for (i = 0; i < 2; i++) {
+		/* Reset DAC twice just in-case the chip
+		 * didn't initialized properly */
+		data = hw_read_20kx(hw, GPIO_DATA);
+		/* GPIO data bit 1 */
+		data &= 0xFFFFFFFD;
+		hw_write_20kx(hw, GPIO_DATA, data);
+		mdelay(10);
+		data |= 0x2;
+		hw_write_20kx(hw, GPIO_DATA, data);
+		mdelay(50);
+
+		/* Reset the 2nd time */
+		data &= 0xFFFFFFFD;
+		hw_write_20kx(hw, GPIO_DATA, data);
+		mdelay(10);
+		data |= 0x2;
+		hw_write_20kx(hw, GPIO_DATA, data);
+		mdelay(50);
+
+		if (hw20k2_i2c_read(hw, CS4382_MC1,  &cs_read.mode_control_1))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_MC2,  &cs_read.mode_control_2))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_MC3,  &cs_read.mode_control_3))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_FC,   &cs_read.filter_control))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_IC,   &cs_read.invert_control))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_XC1,  &cs_read.mix_control_P1))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCA1, &cs_read.vol_control_A1))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCB1, &cs_read.vol_control_B1))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_XC2,  &cs_read.mix_control_P2))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCA2, &cs_read.vol_control_A2))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCB2, &cs_read.vol_control_B2))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_XC3,  &cs_read.mix_control_P3))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCA3, &cs_read.vol_control_A3))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCB3, &cs_read.vol_control_B3))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_XC4,  &cs_read.mix_control_P4))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCA4, &cs_read.vol_control_A4))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCB4, &cs_read.vol_control_B4))
+			continue;
+
+		if (memcmp(&cs_read, &cs_def, sizeof(cs_read)))
+			continue;
+		else
+			break;
+	}
+
+	if (i >= 2)
+		goto End;
+
+	/* Note: Every I2C write must have some delay.
+	 * This is not a requirement but the delay works here... */
+	hw20k2_i2c_write(hw, CS4382_MC1, 0x80);
+	hw20k2_i2c_write(hw, CS4382_MC2, 0x10);
+	if (1 == info->msr) {
+		hw20k2_i2c_write(hw, CS4382_XC1, 0x24);
+		hw20k2_i2c_write(hw, CS4382_XC2, 0x24);
+		hw20k2_i2c_write(hw, CS4382_XC3, 0x24);
+		hw20k2_i2c_write(hw, CS4382_XC4, 0x24);
+	} else if (2 == info->msr) {
+		hw20k2_i2c_write(hw, CS4382_XC1, 0x25);
+		hw20k2_i2c_write(hw, CS4382_XC2, 0x25);
+		hw20k2_i2c_write(hw, CS4382_XC3, 0x25);
+		hw20k2_i2c_write(hw, CS4382_XC4, 0x25);
+	} else {
+		hw20k2_i2c_write(hw, CS4382_XC1, 0x26);
+		hw20k2_i2c_write(hw, CS4382_XC2, 0x26);
+		hw20k2_i2c_write(hw, CS4382_XC3, 0x26);
+		hw20k2_i2c_write(hw, CS4382_XC4, 0x26);
+	}
+
+	return 0;
+End:
+
+	hw20k2_i2c_uninit(hw);
+	return -1;
+}
+
+/* ADC operations */
+#define MAKE_WM8775_ADDR(addr, data)	(u32)(((addr<<1)&0xFE)|((data>>8)&0x1))
+#define MAKE_WM8775_DATA(data)	(u32)(data&0xFF)
+
+#define WM8775_IC       0x0B
+#define WM8775_MMC      0x0C
+#define WM8775_AADCL    0x0E
+#define WM8775_AADCR    0x0F
+#define WM8775_ADCMC    0x15
+#define WM8775_RESET    0x17
+
+static int hw_is_adc_input_selected(struct hw *hw, enum ADCSRC type)
+{
+	u32 data;
+
+	data = hw_read_20kx(hw, GPIO_DATA);
+	switch (type) {
+	case ADC_MICIN:
+		data = (data & (0x1 << 14)) ? 1 : 0;
+		break;
+	case ADC_LINEIN:
+		data = (data & (0x1 << 14)) ? 0 : 1;
+		break;
+	default:
+		data = 0;
+	}
+	return data;
+}
+
+static int hw_adc_input_select(struct hw *hw, enum ADCSRC type)
+{
+	u32 data;
+
+	data = hw_read_20kx(hw, GPIO_DATA);
+	switch (type) {
+	case ADC_MICIN:
+		data |= (0x1 << 14);
+		hw_write_20kx(hw, GPIO_DATA, data);
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101),
+				MAKE_WM8775_DATA(0x101)); /* Mic-in */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xE7),
+				MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xE7),
+				MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
+		break;
+	case ADC_LINEIN:
+		data &= ~(0x1 << 14);
+		hw_write_20kx(hw, GPIO_DATA, data);
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102),
+				MAKE_WM8775_DATA(0x102)); /* Line-in */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF),
+				MAKE_WM8775_DATA(0xCF)); /* No boost */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF),
+				MAKE_WM8775_DATA(0xCF)); /* No boost */
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
+{
+	int err;
+	u32 mux = 2, data, ctl;
+
+	/*  Set ADC reset bit as output */
+	data = hw_read_20kx(hw, GPIO_CTRL);
+	data |= (0x1 << 15);
+	hw_write_20kx(hw, GPIO_CTRL, data);
+
+	/* Initialize I2C */
+	err = hw20k2_i2c_init(hw, 0x1A, 1, 1);
+	if (err < 0) {
+		printk(KERN_ALERT "ctxfi: Failure to acquire I2C!!!\n");
+		goto error;
+	}
+
+	/* Make ADC in normal operation */
+	data = hw_read_20kx(hw, GPIO_DATA);
+	data &= ~(0x1 << 15);
+	mdelay(10);
+	data |= (0x1 << 15);
+	hw_write_20kx(hw, GPIO_DATA, data);
+	mdelay(50);
+
+	/* Set the master mode (256fs) */
+	if (1 == info->msr) {
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x02),
+						MAKE_WM8775_DATA(0x02));
+	} else if (2 == info->msr) {
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x0A),
+						MAKE_WM8775_DATA(0x0A));
+	} else {
+		printk(KERN_ALERT "ctxfi: Invalid master sampling "
+				  "rate (msr %d)!!!\n", info->msr);
+		err = -EINVAL;
+		goto error;
+	}
+
+	/* Configure GPIO bit 14 change to line-in/mic-in */
+	ctl = hw_read_20kx(hw, GPIO_CTRL);
+	ctl |= 0x1 << 14;
+	hw_write_20kx(hw, GPIO_CTRL, ctl);
+
+	/* Check using Mic-in or Line-in */
+	data = hw_read_20kx(hw, GPIO_DATA);
+
+	if (mux == 1) {
+		/* Configures GPIO data to select Mic-in */
+		data |= 0x1 << 14;
+		hw_write_20kx(hw, GPIO_DATA, data);
+
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101),
+				MAKE_WM8775_DATA(0x101)); /* Mic-in */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xE7),
+				MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xE7),
+				MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
+	} else if (mux == 2) {
+		/* Configures GPIO data to select Line-in */
+		data &= ~(0x1 << 14);
+		hw_write_20kx(hw, GPIO_DATA, data);
+
+		/* Setup ADC */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102),
+				MAKE_WM8775_DATA(0x102)); /* Line-in */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF),
+				MAKE_WM8775_DATA(0xCF)); /* No boost */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF),
+				MAKE_WM8775_DATA(0xCF)); /* No boost */
+	} else {
+		printk(KERN_ALERT "ctxfi: ERROR!!! Invalid input mux!!!\n");
+		err = -EINVAL;
+		goto error;
+	}
+
+	return 0;
+
+error:
+	hw20k2_i2c_uninit(hw);
+	return err;
+}
+
+static int hw_have_digit_io_switch(struct hw *hw)
+{
+	return 0;
+}
+
+static int hw_card_start(struct hw *hw)
+{
+	int err = 0;
+	struct pci_dev *pci = hw->pci;
+	unsigned int gctl;
+
+	err = pci_enable_device(pci);
+	if (err < 0)
+		return err;
+
+	/* Set DMA transfer mask */
+	if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 ||
+	    pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) {
+		printk(KERN_ERR "ctxfi: architecture does not support PCI "
+		"busmaster DMA with mask 0x%llx\n", CT_XFI_DMA_MASK);
+		err = -ENXIO;
+		goto error1;
+	}
+
+	err = pci_request_regions(pci, "XFi");
+	if (err < 0)
+		goto error1;
+
+	hw->io_base = pci_resource_start(hw->pci, 2);
+	hw->mem_base = (unsigned long)ioremap(hw->io_base,
+					pci_resource_len(hw->pci, 2));
+	if (NULL == (void *)hw->mem_base) {
+		err = -ENOENT;
+		goto error2;
+	}
+
+	/* Switch to 20k2 mode from UAA mode. */
+	gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL);
+	set_field(&gctl, GCTL_UAA, 0);
+	hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
+
+	/*if ((err = request_irq(pci->irq, ct_atc_interrupt, IRQF_SHARED,
+				atc->chip_details->nm_card, hw))) {
+		goto error3;
+	}
+	hw->irq = pci->irq;
+	*/
+
+	pci_set_master(pci);
+
+	return 0;
+
+/*error3:
+	iounmap((void *)hw->mem_base);
+	hw->mem_base = (unsigned long)NULL;*/
+error2:
+	pci_release_regions(pci);
+	hw->io_base = 0;
+error1:
+	pci_disable_device(pci);
+	return err;
+}
+
+static int hw_card_stop(struct hw *hw)
+{
+	/* TODO: Disable interrupt and so on... */
+	return 0;
+}
+
+static int hw_card_shutdown(struct hw *hw)
+{
+	if (hw->irq >= 0)
+		free_irq(hw->irq, hw);
+
+	hw->irq	= -1;
+
+	if (NULL != ((void *)hw->mem_base))
+		iounmap((void *)hw->mem_base);
+
+	hw->mem_base = (unsigned long)NULL;
+
+	if (hw->io_base)
+		pci_release_regions(hw->pci);
+
+	hw->io_base = 0;
+
+	pci_disable_device(hw->pci);
+
+	return 0;
+}
+
+static int hw_card_init(struct hw *hw, struct card_conf *info)
+{
+	int err;
+	unsigned int gctl;
+	u32 data = 0;
+	struct dac_conf dac_info = {0};
+	struct adc_conf adc_info = {0};
+	struct daio_conf daio_info = {0};
+	struct trn_conf trn_info = {0};
+
+	/* Get PCI io port/memory base address and
+	 * do 20kx core switch if needed. */
+	if (!hw->io_base) {
+		err = hw_card_start(hw);
+		if (err)
+			return err;
+	}
+
+	/* PLL init */
+	err = hw_pll_init(hw, info->rsr);
+	if (err < 0)
+		return err;
+
+	/* kick off auto-init */
+	err = hw_auto_init(hw);
+	if (err < 0)
+		return err;
+
+	gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL);
+	set_field(&gctl, GCTL_DBP, 1);
+	set_field(&gctl, GCTL_TBP, 1);
+	set_field(&gctl, GCTL_FBP, 1);
+	set_field(&gctl, GCTL_DPC, 0);
+	hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
+
+	/* Reset all global pending interrupts */
+	hw_write_20kx(hw, INTERRUPT_GIE, 0);
+	/* Reset all SRC pending interrupts */
+	hw_write_20kx(hw, SRC_IP, 0);
+
+	/* TODO: detect the card ID and configure GPIO accordingly. */
+	/* Configures GPIO (0xD802 0x98028) */
+	/*hw_write_20kx(hw, GPIO_CTRL, 0x7F07);*/
+	/* Configures GPIO (SB0880) */
+	/*hw_write_20kx(hw, GPIO_CTRL, 0xFF07);*/
+	hw_write_20kx(hw, GPIO_CTRL, 0xD802);
+
+	/* Enable audio ring */
+	hw_write_20kx(hw, MIXER_AR_ENABLE, 0x01);
+
+	trn_info.vm_pgt_phys = info->vm_pgt_phys;
+	err = hw_trn_init(hw, &trn_info);
+	if (err < 0)
+		return err;
+
+	daio_info.msr = info->msr;
+	err = hw_daio_init(hw, &daio_info);
+	if (err < 0)
+		return err;
+
+	dac_info.msr = info->msr;
+	err = hw_dac_init(hw, &dac_info);
+	if (err < 0)
+		return err;
+
+	adc_info.msr = info->msr;
+	adc_info.input = ADC_LINEIN;
+	adc_info.mic20db = 0;
+	err = hw_adc_init(hw, &adc_info);
+	if (err < 0)
+		return err;
+
+	data = hw_read_20kx(hw, SRC_MCTL);
+	data |= 0x1; /* Enables input from the audio ring */
+	hw_write_20kx(hw, SRC_MCTL, data);
+
+	return 0;
+}
+
+static u32 hw_read_20kx(struct hw *hw, u32 reg)
+{
+	return readl((void *)(hw->mem_base + reg));
+}
+
+static void hw_write_20kx(struct hw *hw, u32 reg, u32 data)
+{
+	writel(data, (void *)(hw->mem_base + reg));
+}
+
+static struct hw ct20k2_preset __devinitdata = {
+	.irq = -1,
+
+	.card_init = hw_card_init,
+	.card_stop = hw_card_stop,
+	.pll_init = hw_pll_init,
+	.is_adc_source_selected = hw_is_adc_input_selected,
+	.select_adc_source = hw_adc_input_select,
+	.have_digit_io_switch = hw_have_digit_io_switch,
+
+	.src_rsc_get_ctrl_blk = src_get_rsc_ctrl_blk,
+	.src_rsc_put_ctrl_blk = src_put_rsc_ctrl_blk,
+	.src_mgr_get_ctrl_blk = src_mgr_get_ctrl_blk,
+	.src_mgr_put_ctrl_blk = src_mgr_put_ctrl_blk,
+	.src_set_state = src_set_state,
+	.src_set_bm = src_set_bm,
+	.src_set_rsr = src_set_rsr,
+	.src_set_sf = src_set_sf,
+	.src_set_wr = src_set_wr,
+	.src_set_pm = src_set_pm,
+	.src_set_rom = src_set_rom,
+	.src_set_vo = src_set_vo,
+	.src_set_st = src_set_st,
+	.src_set_ie = src_set_ie,
+	.src_set_ilsz = src_set_ilsz,
+	.src_set_bp = src_set_bp,
+	.src_set_cisz = src_set_cisz,
+	.src_set_ca = src_set_ca,
+	.src_set_sa = src_set_sa,
+	.src_set_la = src_set_la,
+	.src_set_pitch = src_set_pitch,
+	.src_set_dirty = src_set_dirty,
+	.src_set_clear_zbufs = src_set_clear_zbufs,
+	.src_set_dirty_all = src_set_dirty_all,
+	.src_commit_write = src_commit_write,
+	.src_get_ca = src_get_ca,
+	.src_get_dirty = src_get_dirty,
+	.src_dirty_conj_mask = src_dirty_conj_mask,
+	.src_mgr_enbs_src = src_mgr_enbs_src,
+	.src_mgr_enb_src = src_mgr_enb_src,
+	.src_mgr_dsb_src = src_mgr_dsb_src,
+	.src_mgr_commit_write = src_mgr_commit_write,
+
+	.srcimp_mgr_get_ctrl_blk = srcimp_mgr_get_ctrl_blk,
+	.srcimp_mgr_put_ctrl_blk = srcimp_mgr_put_ctrl_blk,
+	.srcimp_mgr_set_imaparc = srcimp_mgr_set_imaparc,
+	.srcimp_mgr_set_imapuser = srcimp_mgr_set_imapuser,
+	.srcimp_mgr_set_imapnxt = srcimp_mgr_set_imapnxt,
+	.srcimp_mgr_set_imapaddr = srcimp_mgr_set_imapaddr,
+	.srcimp_mgr_commit_write = srcimp_mgr_commit_write,
+
+	.amixer_rsc_get_ctrl_blk = amixer_rsc_get_ctrl_blk,
+	.amixer_rsc_put_ctrl_blk = amixer_rsc_put_ctrl_blk,
+	.amixer_mgr_get_ctrl_blk = amixer_mgr_get_ctrl_blk,
+	.amixer_mgr_put_ctrl_blk = amixer_mgr_put_ctrl_blk,
+	.amixer_set_mode = amixer_set_mode,
+	.amixer_set_iv = amixer_set_iv,
+	.amixer_set_x = amixer_set_x,
+	.amixer_set_y = amixer_set_y,
+	.amixer_set_sadr = amixer_set_sadr,
+	.amixer_set_se = amixer_set_se,
+	.amixer_set_dirty = amixer_set_dirty,
+	.amixer_set_dirty_all = amixer_set_dirty_all,
+	.amixer_commit_write = amixer_commit_write,
+	.amixer_get_y = amixer_get_y,
+	.amixer_get_dirty = amixer_get_dirty,
+
+	.dai_get_ctrl_blk = dai_get_ctrl_blk,
+	.dai_put_ctrl_blk = dai_put_ctrl_blk,
+	.dai_srt_set_srco = dai_srt_set_srco,
+	.dai_srt_set_srcm = dai_srt_set_srcm,
+	.dai_srt_set_rsr = dai_srt_set_rsr,
+	.dai_srt_set_drat = dai_srt_set_drat,
+	.dai_srt_set_ec = dai_srt_set_ec,
+	.dai_srt_set_et = dai_srt_set_et,
+	.dai_commit_write = dai_commit_write,
+
+	.dao_get_ctrl_blk = dao_get_ctrl_blk,
+	.dao_put_ctrl_blk = dao_put_ctrl_blk,
+	.dao_set_spos = dao_set_spos,
+	.dao_commit_write = dao_commit_write,
+	.dao_get_spos = dao_get_spos,
+
+	.daio_mgr_get_ctrl_blk = daio_mgr_get_ctrl_blk,
+	.daio_mgr_put_ctrl_blk = daio_mgr_put_ctrl_blk,
+	.daio_mgr_enb_dai = daio_mgr_enb_dai,
+	.daio_mgr_dsb_dai = daio_mgr_dsb_dai,
+	.daio_mgr_enb_dao = daio_mgr_enb_dao,
+	.daio_mgr_dsb_dao = daio_mgr_dsb_dao,
+	.daio_mgr_dao_init = daio_mgr_dao_init,
+	.daio_mgr_set_imaparc = daio_mgr_set_imaparc,
+	.daio_mgr_set_imapnxt = daio_mgr_set_imapnxt,
+	.daio_mgr_set_imapaddr = daio_mgr_set_imapaddr,
+	.daio_mgr_commit_write = daio_mgr_commit_write,
+};
+
+int __devinit create_20k2_hw_obj(struct hw **rhw)
+{
+	struct hw20k2 *hw20k2;
+
+	*rhw = NULL;
+	hw20k2 = kzalloc(sizeof(*hw20k2), GFP_KERNEL);
+	if (!hw20k2)
+		return -ENOMEM;
+
+	hw20k2->hw = ct20k2_preset;
+	*rhw = &hw20k2->hw;
+
+	return 0;
+}
+
+int destroy_20k2_hw_obj(struct hw *hw)
+{
+	if (hw->io_base)
+		hw_card_shutdown(hw);
+
+	kfree(hw);
+	return 0;
+}
diff --git a/sound/pci/ctxfi/cthw20k2.h b/sound/pci/ctxfi/cthw20k2.h
new file mode 100644
index 0000000..d2b7daa
--- /dev/null
+++ b/sound/pci/ctxfi/cthw20k2.h
@@ -0,0 +1,26 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthw20k2.h
+ *
+ * @Brief
+ * This file contains the definition of hardware access methord.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTHW20K2_H
+#define CTHW20K2_H
+
+#include "cthardware.h"
+
+int create_20k2_hw_obj(struct hw **rhw);
+int destroy_20k2_hw_obj(struct hw *hw);
+
+#endif /* CTHW20K2_H */
diff --git a/sound/pci/ctxfi/ctimap.c b/sound/pci/ctxfi/ctimap.c
new file mode 100644
index 0000000..0b73368
--- /dev/null
+++ b/sound/pci/ctxfi/ctimap.c
@@ -0,0 +1,112 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctimap.c
+ *
+ * @Brief
+ * This file contains the implementation of generic input mapper operations
+ * for input mapper management.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 23 2008
+ *
+ */
+
+#include "ctimap.h"
+#include <linux/slab.h>
+
+int input_mapper_add(struct list_head *mappers, struct imapper *entry,
+		     int (*map_op)(void *, struct imapper *), void *data)
+{
+	struct list_head *pos, *pre, *head;
+	struct imapper *pre_ent, *pos_ent;
+
+	head = mappers;
+
+	if (list_empty(head)) {
+		entry->next = entry->addr;
+		map_op(data, entry);
+		list_add(&entry->list, head);
+		return 0;
+	}
+
+	list_for_each(pos, head) {
+		pos_ent = list_entry(pos, struct imapper, list);
+		if (pos_ent->slot > entry->slot) {
+			/* found a position in list */
+			break;
+		}
+	}
+
+	if (pos != head) {
+		pre = pos->prev;
+		if (pre == head)
+			pre = head->prev;
+
+		__list_add(&entry->list, pos->prev, pos);
+	} else {
+		pre = head->prev;
+		pos = head->next;
+		list_add_tail(&entry->list, head);
+	}
+
+	pre_ent = list_entry(pre, struct imapper, list);
+	pos_ent = list_entry(pos, struct imapper, list);
+
+	entry->next = pos_ent->addr;
+	map_op(data, entry);
+	pre_ent->next = entry->addr;
+	map_op(data, pre_ent);
+
+	return 0;
+}
+
+int input_mapper_delete(struct list_head *mappers, struct imapper *entry,
+		     int (*map_op)(void *, struct imapper *), void *data)
+{
+	struct list_head *next, *pre, *head;
+	struct imapper *pre_ent, *next_ent;
+
+	head = mappers;
+
+	if (list_empty(head))
+		return 0;
+
+	pre = (entry->list.prev == head) ? head->prev : entry->list.prev;
+	next = (entry->list.next == head) ? head->next : entry->list.next;
+
+	if (pre == &entry->list) {
+		/* entry is the only one node in mappers list */
+		entry->next = entry->addr = entry->user = entry->slot = 0;
+		map_op(data, entry);
+		list_del(&entry->list);
+		return 0;
+	}
+
+	pre_ent = list_entry(pre, struct imapper, list);
+	next_ent = list_entry(next, struct imapper, list);
+
+	pre_ent->next = next_ent->addr;
+	map_op(data, pre_ent);
+	list_del(&entry->list);
+
+	return 0;
+}
+
+void free_input_mapper_list(struct list_head *head)
+{
+	struct imapper *entry;
+	struct list_head *pos;
+
+	while (!list_empty(head)) {
+		pos = head->next;
+		list_del(pos);
+		entry = list_entry(pos, struct imapper, list);
+		kfree(entry);
+	}
+}
+
diff --git a/sound/pci/ctxfi/ctimap.h b/sound/pci/ctxfi/ctimap.h
new file mode 100644
index 0000000..53ccf9b
--- /dev/null
+++ b/sound/pci/ctxfi/ctimap.h
@@ -0,0 +1,40 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctimap.h
+ *
+ * @Brief
+ * This file contains the definition of generic input mapper operations
+ * for input mapper management.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 23 2008
+ *
+ */
+
+#ifndef CTIMAP_H
+#define CTIMAP_H
+
+#include <linux/list.h>
+
+struct imapper {
+	unsigned short slot; /* the id of the slot containing input data */
+	unsigned short user; /* the id of the user resource consuming data */
+	unsigned short addr; /* the input mapper ram id */
+	unsigned short next; /* the next input mapper ram id */
+	struct list_head	list;
+};
+
+int input_mapper_add(struct list_head *mappers, struct imapper *entry,
+		     int (*map_op)(void *, struct imapper *), void *data);
+
+int input_mapper_delete(struct list_head *mappers, struct imapper *entry,
+		     int (*map_op)(void *, struct imapper *), void *data);
+
+void free_input_mapper_list(struct list_head *mappers);
+
+#endif /* CTIMAP_H */
diff --git a/sound/pci/ctxfi/ctmixer.c b/sound/pci/ctxfi/ctmixer.c
new file mode 100644
index 0000000..666722d
--- /dev/null
+++ b/sound/pci/ctxfi/ctmixer.c
@@ -0,0 +1,1123 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctmixer.c
+ *
+ * @Brief
+ * This file contains the implementation of alsa mixer device functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 28 2008
+ *
+ */
+
+
+#include "ctmixer.h"
+#include "ctamixer.h"
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/asoundef.h>
+#include <sound/pcm.h>
+#include <sound/tlv.h>
+
+enum CT_SUM_CTL {
+	SUM_IN_F,
+	SUM_IN_R,
+	SUM_IN_C,
+	SUM_IN_S,
+	SUM_IN_F_C,
+
+	NUM_CT_SUMS
+};
+
+enum CT_AMIXER_CTL {
+	/* volume control mixers */
+	AMIXER_MASTER_F,
+	AMIXER_MASTER_R,
+	AMIXER_MASTER_C,
+	AMIXER_MASTER_S,
+	AMIXER_PCM_F,
+	AMIXER_PCM_R,
+	AMIXER_PCM_C,
+	AMIXER_PCM_S,
+	AMIXER_SPDIFI,
+	AMIXER_LINEIN,
+	AMIXER_MIC,
+	AMIXER_SPDIFO,
+	AMIXER_WAVE_F,
+	AMIXER_WAVE_R,
+	AMIXER_WAVE_C,
+	AMIXER_WAVE_S,
+	AMIXER_MASTER_F_C,
+	AMIXER_PCM_F_C,
+	AMIXER_SPDIFI_C,
+	AMIXER_LINEIN_C,
+	AMIXER_MIC_C,
+
+	/* this should always be the last one */
+	NUM_CT_AMIXERS
+};
+
+enum CTALSA_MIXER_CTL {
+	/* volume control mixers */
+	MIXER_MASTER_P,
+	MIXER_PCM_P,
+	MIXER_LINEIN_P,
+	MIXER_MIC_P,
+	MIXER_SPDIFI_P,
+	MIXER_SPDIFO_P,
+	MIXER_WAVEF_P,
+	MIXER_WAVER_P,
+	MIXER_WAVEC_P,
+	MIXER_WAVES_P,
+	MIXER_MASTER_C,
+	MIXER_PCM_C,
+	MIXER_LINEIN_C,
+	MIXER_MIC_C,
+	MIXER_SPDIFI_C,
+
+	/* switch control mixers */
+	MIXER_PCM_C_S,
+	MIXER_LINEIN_C_S,
+	MIXER_MIC_C_S,
+	MIXER_SPDIFI_C_S,
+	MIXER_LINEIN_P_S,
+	MIXER_SPDIFO_P_S,
+	MIXER_SPDIFI_P_S,
+	MIXER_WAVEF_P_S,
+	MIXER_WAVER_P_S,
+	MIXER_WAVEC_P_S,
+	MIXER_WAVES_P_S,
+	MIXER_DIGITAL_IO_S,
+	MIXER_IEC958_MASK,
+	MIXER_IEC958_DEFAULT,
+	MIXER_IEC958_STREAM,
+
+	/* this should always be the last one */
+	NUM_CTALSA_MIXERS
+};
+
+#define VOL_MIXER_START		MIXER_MASTER_P
+#define VOL_MIXER_END		MIXER_SPDIFI_C
+#define VOL_MIXER_NUM		(VOL_MIXER_END - VOL_MIXER_START + 1)
+#define SWH_MIXER_START		MIXER_PCM_C_S
+#define SWH_MIXER_END		MIXER_DIGITAL_IO_S
+#define SWH_CAPTURE_START	MIXER_PCM_C_S
+#define SWH_CAPTURE_END		MIXER_SPDIFI_C_S
+
+#define CHN_NUM		2
+
+struct ct_kcontrol_init {
+	unsigned char ctl;
+	char *name;
+};
+
+static struct ct_kcontrol_init
+ct_kcontrol_init_table[NUM_CTALSA_MIXERS] = {
+	[MIXER_MASTER_P] = {
+		.ctl = 1,
+		.name = "Master Playback Volume",
+	},
+	[MIXER_MASTER_C] = {
+		.ctl = 1,
+		.name = "Master Capture Volume",
+	},
+	[MIXER_PCM_P] = {
+		.ctl = 1,
+		.name = "PCM Playback Volume",
+	},
+	[MIXER_PCM_C] = {
+		.ctl = 1,
+		.name = "PCM Capture Volume",
+	},
+	[MIXER_LINEIN_P] = {
+		.ctl = 1,
+		.name = "Line-in Playback Volume",
+	},
+	[MIXER_LINEIN_C] = {
+		.ctl = 1,
+		.name = "Line-in Capture Volume",
+	},
+	[MIXER_MIC_P] = {
+		.ctl = 1,
+		.name = "Mic Playback Volume",
+	},
+	[MIXER_MIC_C] = {
+		.ctl = 1,
+		.name = "Mic Capture Volume",
+	},
+	[MIXER_SPDIFI_P] = {
+		.ctl = 1,
+		.name = "S/PDIF-in Playback Volume",
+	},
+	[MIXER_SPDIFI_C] = {
+		.ctl = 1,
+		.name = "S/PDIF-in Capture Volume",
+	},
+	[MIXER_SPDIFO_P] = {
+		.ctl = 1,
+		.name = "S/PDIF-out Playback Volume",
+	},
+	[MIXER_WAVEF_P] = {
+		.ctl = 1,
+		.name = "Front Playback Volume",
+	},
+	[MIXER_WAVES_P] = {
+		.ctl = 1,
+		.name = "Side Playback Volume",
+	},
+	[MIXER_WAVEC_P] = {
+		.ctl = 1,
+		.name = "Center/LFE Playback Volume",
+	},
+	[MIXER_WAVER_P] = {
+		.ctl = 1,
+		.name = "Surround Playback Volume",
+	},
+
+	[MIXER_PCM_C_S] = {
+		.ctl = 1,
+		.name = "PCM Capture Switch",
+	},
+	[MIXER_LINEIN_C_S] = {
+		.ctl = 1,
+		.name = "Line-in Capture Switch",
+	},
+	[MIXER_MIC_C_S] = {
+		.ctl = 1,
+		.name = "Mic Capture Switch",
+	},
+	[MIXER_SPDIFI_C_S] = {
+		.ctl = 1,
+		.name = "S/PDIF-in Capture Switch",
+	},
+	[MIXER_LINEIN_P_S] = {
+		.ctl = 1,
+		.name = "Line-in Playback Switch",
+	},
+	[MIXER_SPDIFO_P_S] = {
+		.ctl = 1,
+		.name = "S/PDIF-out Playback Switch",
+	},
+	[MIXER_SPDIFI_P_S] = {
+		.ctl = 1,
+		.name = "S/PDIF-in Playback Switch",
+	},
+	[MIXER_WAVEF_P_S] = {
+		.ctl = 1,
+		.name = "Front Playback Switch",
+	},
+	[MIXER_WAVES_P_S] = {
+		.ctl = 1,
+		.name = "Side Playback Switch",
+	},
+	[MIXER_WAVEC_P_S] = {
+		.ctl = 1,
+		.name = "Center/LFE Playback Switch",
+	},
+	[MIXER_WAVER_P_S] = {
+		.ctl = 1,
+		.name = "Surround Playback Switch",
+	},
+	[MIXER_DIGITAL_IO_S] = {
+		.ctl = 0,
+		.name = "Digit-IO Playback Switch",
+	},
+};
+
+static void
+ct_mixer_recording_select(struct ct_mixer *mixer, enum CT_AMIXER_CTL type);
+
+static void
+ct_mixer_recording_unselect(struct ct_mixer *mixer, enum CT_AMIXER_CTL type);
+
+static struct snd_kcontrol *kctls[2] = {NULL};
+
+static enum CT_AMIXER_CTL get_amixer_index(enum CTALSA_MIXER_CTL alsa_index)
+{
+	switch (alsa_index) {
+	case MIXER_MASTER_P:	return AMIXER_MASTER_F;
+	case MIXER_MASTER_C:	return AMIXER_MASTER_F_C;
+	case MIXER_PCM_P:	return AMIXER_PCM_F;
+	case MIXER_PCM_C:
+	case MIXER_PCM_C_S:	return AMIXER_PCM_F_C;
+	case MIXER_LINEIN_P:	return AMIXER_LINEIN;
+	case MIXER_LINEIN_C:
+	case MIXER_LINEIN_C_S:	return AMIXER_LINEIN_C;
+	case MIXER_MIC_P:	return AMIXER_MIC;
+	case MIXER_MIC_C:
+	case MIXER_MIC_C_S:	return AMIXER_MIC_C;
+	case MIXER_SPDIFI_P:	return AMIXER_SPDIFI;
+	case MIXER_SPDIFI_C:
+	case MIXER_SPDIFI_C_S:	return AMIXER_SPDIFI_C;
+	case MIXER_SPDIFO_P:	return AMIXER_SPDIFO;
+	case MIXER_WAVEF_P:	return AMIXER_WAVE_F;
+	case MIXER_WAVES_P:	return AMIXER_WAVE_S;
+	case MIXER_WAVEC_P:	return AMIXER_WAVE_C;
+	case MIXER_WAVER_P:	return AMIXER_WAVE_R;
+	default:		return NUM_CT_AMIXERS;
+	}
+}
+
+static enum CT_AMIXER_CTL get_recording_amixer(enum CT_AMIXER_CTL index)
+{
+	switch (index) {
+	case AMIXER_MASTER_F:	return AMIXER_MASTER_F_C;
+	case AMIXER_PCM_F:	return AMIXER_PCM_F_C;
+	case AMIXER_SPDIFI:	return AMIXER_SPDIFI_C;
+	case AMIXER_LINEIN:	return AMIXER_LINEIN_C;
+	case AMIXER_MIC:	return AMIXER_MIC_C;
+	default:		return NUM_CT_AMIXERS;
+	}
+}
+
+static unsigned char
+get_switch_state(struct ct_mixer *mixer, enum CTALSA_MIXER_CTL type)
+{
+	return (mixer->switch_state & (0x1 << (type - SWH_MIXER_START)))
+		? 1 : 0;
+}
+
+static void
+set_switch_state(struct ct_mixer *mixer,
+		 enum CTALSA_MIXER_CTL type, unsigned char state)
+{
+	if (state)
+		mixer->switch_state |= (0x1 << (type - SWH_MIXER_START));
+	else
+		mixer->switch_state &= ~(0x1 << (type - SWH_MIXER_START));
+}
+
+#if 0 /* not used */
+/* Map integer value ranging from 0 to 65535 to 14-bit float value ranging
+ * from 2^-6 to (1+1023/1024) */
+static unsigned int uint16_to_float14(unsigned int x)
+{
+	unsigned int i;
+
+	if (x < 17)
+		return 0;
+
+	x *= 2031;
+	x /= 65535;
+	x += 16;
+
+	/* i <= 6 */
+	for (i = 0; !(x & 0x400); i++)
+		x <<= 1;
+
+	x = (((7 - i) & 0x7) << 10) | (x & 0x3ff);
+
+	return x;
+}
+
+static unsigned int float14_to_uint16(unsigned int x)
+{
+	unsigned int e;
+
+	if (!x)
+		return x;
+
+	e = (x >> 10) & 0x7;
+	x &= 0x3ff;
+	x += 1024;
+	x >>= (7 - e);
+	x -= 16;
+	x *= 65535;
+	x /= 2031;
+
+	return x;
+}
+#endif /* not used */
+
+#define VOL_SCALE	0x1c
+#define VOL_MAX		0x100
+
+static const DECLARE_TLV_DB_SCALE(ct_vol_db_scale, -6400, 25, 1);
+
+static int ct_alsa_mix_volume_info(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = VOL_MAX;
+
+	return 0;
+}
+
+static int ct_alsa_mix_volume_get(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	enum CT_AMIXER_CTL type = get_amixer_index(kcontrol->private_value);
+	struct amixer *amixer;
+	int i, val;
+
+	for (i = 0; i < 2; i++) {
+		amixer = ((struct ct_mixer *)atc->mixer)->
+						amixers[type*CHN_NUM+i];
+		val = amixer->ops->get_scale(amixer) / VOL_SCALE;
+		if (val < 0)
+			val = 0;
+		else if (val > VOL_MAX)
+			val = VOL_MAX;
+		ucontrol->value.integer.value[i] = val;
+	}
+
+	return 0;
+}
+
+static int ct_alsa_mix_volume_put(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	struct ct_mixer *mixer = atc->mixer;
+	enum CT_AMIXER_CTL type = get_amixer_index(kcontrol->private_value);
+	struct amixer *amixer;
+	int i, j, val, oval, change = 0;
+
+	for (i = 0; i < 2; i++) {
+		val = ucontrol->value.integer.value[i];
+		if (val < 0)
+			val = 0;
+		else if (val > VOL_MAX)
+			val = VOL_MAX;
+		val *= VOL_SCALE;
+		amixer = mixer->amixers[type*CHN_NUM+i];
+		oval = amixer->ops->get_scale(amixer);
+		if (val != oval) {
+			amixer->ops->set_scale(amixer, val);
+			amixer->ops->commit_write(amixer);
+			change = 1;
+			/* Synchronize Master/PCM playback AMIXERs. */
+			if (AMIXER_MASTER_F == type || AMIXER_PCM_F == type) {
+				for (j = 1; j < 4; j++) {
+					amixer = mixer->
+						amixers[(type+j)*CHN_NUM+i];
+					amixer->ops->set_scale(amixer, val);
+					amixer->ops->commit_write(amixer);
+				}
+			}
+		}
+	}
+
+	return change;
+}
+
+static struct snd_kcontrol_new vol_ctl = {
+	.access		= SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+	.iface		= SNDRV_CTL_ELEM_IFACE_MIXER,
+	.info		= ct_alsa_mix_volume_info,
+	.get		= ct_alsa_mix_volume_get,
+	.put		= ct_alsa_mix_volume_put,
+	.tlv		= { .p =  ct_vol_db_scale },
+};
+
+static void
+do_line_mic_switch(struct ct_atc *atc, enum CTALSA_MIXER_CTL type)
+{
+
+	if (MIXER_LINEIN_C_S == type) {
+		atc->select_line_in(atc);
+		set_switch_state(atc->mixer, MIXER_MIC_C_S, 0);
+		snd_ctl_notify(atc->card, SNDRV_CTL_EVENT_MASK_VALUE,
+							&kctls[1]->id);
+	} else if (MIXER_MIC_C_S == type) {
+		atc->select_mic_in(atc);
+		set_switch_state(atc->mixer, MIXER_LINEIN_C_S, 0);
+		snd_ctl_notify(atc->card, SNDRV_CTL_EVENT_MASK_VALUE,
+							&kctls[0]->id);
+	}
+}
+
+static void
+do_digit_io_switch(struct ct_atc *atc, int state)
+{
+	struct ct_mixer *mixer = atc->mixer;
+
+	if (state) {
+		atc->select_digit_io(atc);
+		atc->spdif_out_unmute(atc,
+				get_switch_state(mixer, MIXER_SPDIFO_P_S));
+		atc->spdif_in_unmute(atc, 1);
+		atc->line_in_unmute(atc, 0);
+		return;
+	}
+
+	if (get_switch_state(mixer, MIXER_LINEIN_C_S))
+		atc->select_line_in(atc);
+	else if (get_switch_state(mixer, MIXER_MIC_C_S))
+		atc->select_mic_in(atc);
+
+	atc->spdif_out_unmute(atc, 0);
+	atc->spdif_in_unmute(atc, 0);
+	atc->line_in_unmute(atc, 1);
+	return;
+}
+
+static int ct_alsa_mix_switch_info(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	uinfo->value.integer.step = 1;
+
+	return 0;
+}
+
+static int ct_alsa_mix_switch_get(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_mixer *mixer =
+		((struct ct_atc *)snd_kcontrol_chip(kcontrol))->mixer;
+	enum CTALSA_MIXER_CTL type = kcontrol->private_value;
+
+	ucontrol->value.integer.value[0] = get_switch_state(mixer, type);
+	return 0;
+}
+
+static int ct_alsa_mix_switch_put(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	struct ct_mixer *mixer = atc->mixer;
+	enum CTALSA_MIXER_CTL type = kcontrol->private_value;
+	int state;
+
+	state = ucontrol->value.integer.value[0];
+	if (get_switch_state(mixer, type) == state)
+		return 0;
+
+	set_switch_state(mixer, type, state);
+	/* Do changes in mixer. */
+	if ((SWH_CAPTURE_START <= type) && (SWH_CAPTURE_END >= type)) {
+		if (state) {
+			ct_mixer_recording_select(mixer,
+						  get_amixer_index(type));
+		} else {
+			ct_mixer_recording_unselect(mixer,
+						    get_amixer_index(type));
+		}
+	}
+	/* Do changes out of mixer. */
+	if (state && (MIXER_LINEIN_C_S == type || MIXER_MIC_C_S == type))
+		do_line_mic_switch(atc, type);
+	else if (MIXER_WAVEF_P_S == type)
+		atc->line_front_unmute(atc, state);
+	else if (MIXER_WAVES_P_S == type)
+		atc->line_surround_unmute(atc, state);
+	else if (MIXER_WAVEC_P_S == type)
+		atc->line_clfe_unmute(atc, state);
+	else if (MIXER_WAVER_P_S == type)
+		atc->line_rear_unmute(atc, state);
+	else if (MIXER_LINEIN_P_S == type)
+		atc->line_in_unmute(atc, state);
+	else if (MIXER_SPDIFO_P_S == type)
+		atc->spdif_out_unmute(atc, state);
+	else if (MIXER_SPDIFI_P_S == type)
+		atc->spdif_in_unmute(atc, state);
+	else if (MIXER_DIGITAL_IO_S == type)
+		do_digit_io_switch(atc, state);
+
+	return 1;
+}
+
+static struct snd_kcontrol_new swh_ctl = {
+	.access		= SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.iface		= SNDRV_CTL_ELEM_IFACE_MIXER,
+	.info		= ct_alsa_mix_switch_info,
+	.get		= ct_alsa_mix_switch_get,
+	.put		= ct_alsa_mix_switch_put
+};
+
+static int ct_spdif_info(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+	uinfo->count = 1;
+	return 0;
+}
+
+static int ct_spdif_get_mask(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.iec958.status[0] = 0xff;
+	ucontrol->value.iec958.status[1] = 0xff;
+	ucontrol->value.iec958.status[2] = 0xff;
+	ucontrol->value.iec958.status[3] = 0xff;
+	return 0;
+}
+
+static int ct_spdif_default_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	unsigned int status = SNDRV_PCM_DEFAULT_CON_SPDIF;
+
+	ucontrol->value.iec958.status[0] = (status >> 0) & 0xff;
+	ucontrol->value.iec958.status[1] = (status >> 8) & 0xff;
+	ucontrol->value.iec958.status[2] = (status >> 16) & 0xff;
+	ucontrol->value.iec958.status[3] = (status >> 24) & 0xff;
+
+	return 0;
+}
+
+static int ct_spdif_get(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	unsigned int status;
+
+	atc->spdif_out_get_status(atc, &status);
+	ucontrol->value.iec958.status[0] = (status >> 0) & 0xff;
+	ucontrol->value.iec958.status[1] = (status >> 8) & 0xff;
+	ucontrol->value.iec958.status[2] = (status >> 16) & 0xff;
+	ucontrol->value.iec958.status[3] = (status >> 24) & 0xff;
+
+	return 0;
+}
+
+static int ct_spdif_put(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	int change;
+	unsigned int status, old_status;
+
+	status = (ucontrol->value.iec958.status[0] << 0) |
+		 (ucontrol->value.iec958.status[1] << 8) |
+		 (ucontrol->value.iec958.status[2] << 16) |
+		 (ucontrol->value.iec958.status[3] << 24);
+
+	atc->spdif_out_get_status(atc, &old_status);
+	change = (old_status != status);
+	if (change)
+		atc->spdif_out_set_status(atc, status);
+
+	return change;
+}
+
+static struct snd_kcontrol_new iec958_mask_ctl = {
+	.access		= SNDRV_CTL_ELEM_ACCESS_READ,
+	.iface		= SNDRV_CTL_ELEM_IFACE_PCM,
+	.name		= SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
+	.count		= 1,
+	.info		= ct_spdif_info,
+	.get		= ct_spdif_get_mask,
+	.private_value	= MIXER_IEC958_MASK
+};
+
+static struct snd_kcontrol_new iec958_default_ctl = {
+	.iface		= SNDRV_CTL_ELEM_IFACE_PCM,
+	.name		= SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
+	.count		= 1,
+	.info		= ct_spdif_info,
+	.get		= ct_spdif_default_get,
+	.put		= ct_spdif_put,
+	.private_value	= MIXER_IEC958_DEFAULT
+};
+
+static struct snd_kcontrol_new iec958_ctl = {
+	.access		= SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.iface		= SNDRV_CTL_ELEM_IFACE_PCM,
+	.name		= SNDRV_CTL_NAME_IEC958("", PLAYBACK, PCM_STREAM),
+	.count		= 1,
+	.info		= ct_spdif_info,
+	.get		= ct_spdif_get,
+	.put		= ct_spdif_put,
+	.private_value	= MIXER_IEC958_STREAM
+};
+
+#define NUM_IEC958_CTL 3
+
+static int
+ct_mixer_kcontrol_new(struct ct_mixer *mixer, struct snd_kcontrol_new *new)
+{
+	struct snd_kcontrol *kctl;
+	int err;
+
+	kctl = snd_ctl_new1(new, mixer->atc);
+	if (NULL == kctl)
+		return -ENOMEM;
+
+	if (SNDRV_CTL_ELEM_IFACE_PCM == kctl->id.iface)
+		kctl->id.device = IEC958;
+
+	err = snd_ctl_add(mixer->atc->card, kctl);
+	if (err)
+		return err;
+
+	switch (new->private_value) {
+	case MIXER_LINEIN_C_S:
+		kctls[0] = kctl; break;
+	case MIXER_MIC_C_S:
+		kctls[1] = kctl; break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int ct_mixer_kcontrols_create(struct ct_mixer *mixer)
+{
+	enum CTALSA_MIXER_CTL type;
+	struct ct_atc *atc = mixer->atc;
+	int err;
+
+	/* Create snd kcontrol instances on demand */
+	for (type = VOL_MIXER_START; type <= VOL_MIXER_END; type++) {
+		if (ct_kcontrol_init_table[type].ctl) {
+			vol_ctl.name = ct_kcontrol_init_table[type].name;
+			vol_ctl.private_value = (unsigned long)type;
+			err = ct_mixer_kcontrol_new(mixer, &vol_ctl);
+			if (err)
+				return err;
+		}
+	}
+
+	ct_kcontrol_init_table[MIXER_DIGITAL_IO_S].ctl =
+					atc->have_digit_io_switch(atc);
+	for (type = SWH_MIXER_START; type <= SWH_MIXER_END; type++) {
+		if (ct_kcontrol_init_table[type].ctl) {
+			swh_ctl.name = ct_kcontrol_init_table[type].name;
+			swh_ctl.private_value = (unsigned long)type;
+			err = ct_mixer_kcontrol_new(mixer, &swh_ctl);
+			if (err)
+				return err;
+		}
+	}
+
+	err = ct_mixer_kcontrol_new(mixer, &iec958_mask_ctl);
+	if (err)
+		return err;
+
+	err = ct_mixer_kcontrol_new(mixer, &iec958_default_ctl);
+	if (err)
+		return err;
+
+	err = ct_mixer_kcontrol_new(mixer, &iec958_ctl);
+	if (err)
+		return err;
+
+	atc->line_front_unmute(atc, 1);
+	set_switch_state(mixer, MIXER_WAVEF_P_S, 1);
+	atc->line_surround_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_WAVES_P_S, 0);
+	atc->line_clfe_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_WAVEC_P_S, 0);
+	atc->line_rear_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_WAVER_P_S, 0);
+	atc->spdif_out_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_SPDIFO_P_S, 0);
+	atc->line_in_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_LINEIN_P_S, 0);
+	atc->spdif_in_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_SPDIFI_P_S, 0);
+
+	set_switch_state(mixer, MIXER_PCM_C_S, 1);
+	set_switch_state(mixer, MIXER_LINEIN_C_S, 1);
+	set_switch_state(mixer, MIXER_SPDIFI_C_S, 1);
+
+	return 0;
+}
+
+static void
+ct_mixer_recording_select(struct ct_mixer *mixer, enum CT_AMIXER_CTL type)
+{
+	struct amixer *amix_d;
+	struct sum *sum_c;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		amix_d = mixer->amixers[type*CHN_NUM+i];
+		sum_c = mixer->sums[SUM_IN_F_C*CHN_NUM+i];
+		amix_d->ops->set_sum(amix_d, sum_c);
+		amix_d->ops->commit_write(amix_d);
+	}
+}
+
+static void
+ct_mixer_recording_unselect(struct ct_mixer *mixer, enum CT_AMIXER_CTL type)
+{
+	struct amixer *amix_d;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		amix_d = mixer->amixers[type*CHN_NUM+i];
+		amix_d->ops->set_sum(amix_d, NULL);
+		amix_d->ops->commit_write(amix_d);
+	}
+}
+
+static int ct_mixer_get_resources(struct ct_mixer *mixer)
+{
+	struct sum_mgr *sum_mgr;
+	struct sum *sum;
+	struct sum_desc sum_desc = {0};
+	struct amixer_mgr *amixer_mgr;
+	struct amixer *amixer;
+	struct amixer_desc am_desc = {0};
+	int err;
+	int i;
+
+	/* Allocate sum resources for mixer obj */
+	sum_mgr = (struct sum_mgr *)mixer->atc->rsc_mgrs[SUM];
+	sum_desc.msr = mixer->atc->msr;
+	for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) {
+		err = sum_mgr->get_sum(sum_mgr, &sum_desc, &sum);
+		if (err) {
+			printk(KERN_ERR "ctxfi:Failed to get sum resources for "
+					  "front output!\n");
+			break;
+		}
+		mixer->sums[i] = sum;
+	}
+	if (err)
+		goto error1;
+
+	/* Allocate amixer resources for mixer obj */
+	amixer_mgr = (struct amixer_mgr *)mixer->atc->rsc_mgrs[AMIXER];
+	am_desc.msr = mixer->atc->msr;
+	for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) {
+		err = amixer_mgr->get_amixer(amixer_mgr, &am_desc, &amixer);
+		if (err) {
+			printk(KERN_ERR "ctxfi:Failed to get amixer resources "
+			       "for mixer obj!\n");
+			break;
+		}
+		mixer->amixers[i] = amixer;
+	}
+	if (err)
+		goto error2;
+
+	return 0;
+
+error2:
+	for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) {
+		if (NULL != mixer->amixers[i]) {
+			amixer = mixer->amixers[i];
+			amixer_mgr->put_amixer(amixer_mgr, amixer);
+			mixer->amixers[i] = NULL;
+		}
+	}
+error1:
+	for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) {
+		if (NULL != mixer->sums[i]) {
+			sum_mgr->put_sum(sum_mgr, (struct sum *)mixer->sums[i]);
+			mixer->sums[i] = NULL;
+		}
+	}
+
+	return err;
+}
+
+static int ct_mixer_get_mem(struct ct_mixer **rmixer)
+{
+	struct ct_mixer *mixer;
+	int err;
+
+	*rmixer = NULL;
+	/* Allocate mem for mixer obj */
+	mixer = kzalloc(sizeof(*mixer), GFP_KERNEL);
+	if (NULL == mixer)
+		return -ENOMEM;
+
+	mixer->amixers = kzalloc(sizeof(void *)*(NUM_CT_AMIXERS*CHN_NUM),
+				 GFP_KERNEL);
+	if (NULL == mixer->amixers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+	mixer->sums = kzalloc(sizeof(void *)*(NUM_CT_SUMS*CHN_NUM), GFP_KERNEL);
+	if (NULL == mixer->sums) {
+		err = -ENOMEM;
+		goto error2;
+	}
+
+	*rmixer = mixer;
+	return 0;
+
+error2:
+	kfree(mixer->amixers);
+error1:
+	kfree(mixer);
+	return err;
+}
+
+static int ct_mixer_topology_build(struct ct_mixer *mixer)
+{
+	struct sum *sum;
+	struct amixer *amix_d, *amix_s;
+	enum CT_AMIXER_CTL i, j;
+
+	/* Build topology from destination to source */
+
+	/* Set up Master mixer */
+	for (i = AMIXER_MASTER_F, j = SUM_IN_F;
+					i <= AMIXER_MASTER_S; i++, j++) {
+		amix_d = mixer->amixers[i*CHN_NUM];
+		sum = mixer->sums[j*CHN_NUM];
+		amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL);
+		amix_d = mixer->amixers[i*CHN_NUM+1];
+		sum = mixer->sums[j*CHN_NUM+1];
+		amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL);
+	}
+
+	/* Set up Wave-out mixer */
+	for (i = AMIXER_WAVE_F, j = AMIXER_MASTER_F;
+					i <= AMIXER_WAVE_S; i++, j++) {
+		amix_d = mixer->amixers[i*CHN_NUM];
+		amix_s = mixer->amixers[j*CHN_NUM];
+		amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL);
+		amix_d = mixer->amixers[i*CHN_NUM+1];
+		amix_s = mixer->amixers[j*CHN_NUM+1];
+		amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL);
+	}
+
+	/* Set up S/PDIF-out mixer */
+	amix_d = mixer->amixers[AMIXER_SPDIFO*CHN_NUM];
+	amix_s = mixer->amixers[AMIXER_MASTER_F*CHN_NUM];
+	amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL);
+	amix_d = mixer->amixers[AMIXER_SPDIFO*CHN_NUM+1];
+	amix_s = mixer->amixers[AMIXER_MASTER_F*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL);
+
+	/* Set up PCM-in mixer */
+	for (i = AMIXER_PCM_F, j = SUM_IN_F; i <= AMIXER_PCM_S; i++, j++) {
+		amix_d = mixer->amixers[i*CHN_NUM];
+		sum = mixer->sums[j*CHN_NUM];
+		amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+		amix_d = mixer->amixers[i*CHN_NUM+1];
+		sum = mixer->sums[j*CHN_NUM+1];
+		amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	}
+
+	/* Set up Line-in mixer */
+	amix_d = mixer->amixers[AMIXER_LINEIN*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_LINEIN*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up Mic-in mixer */
+	amix_d = mixer->amixers[AMIXER_MIC*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_MIC*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up S/PDIF-in mixer */
+	amix_d = mixer->amixers[AMIXER_SPDIFI*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_SPDIFI*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up Master recording mixer */
+	amix_d = mixer->amixers[AMIXER_MASTER_F_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL);
+	amix_d = mixer->amixers[AMIXER_MASTER_F_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL);
+
+	/* Set up PCM-in recording mixer */
+	amix_d = mixer->amixers[AMIXER_PCM_F_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_PCM_F_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up Line-in recording mixer */
+	amix_d = mixer->amixers[AMIXER_LINEIN_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_LINEIN_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up Mic-in recording mixer */
+	amix_d = mixer->amixers[AMIXER_MIC_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_MIC_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up S/PDIF-in recording mixer */
+	amix_d = mixer->amixers[AMIXER_SPDIFI_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_SPDIFI_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	return 0;
+}
+
+static int mixer_set_input_port(struct amixer *amixer, struct rsc *rsc)
+{
+	amixer->ops->set_input(amixer, rsc);
+	amixer->ops->commit_write(amixer);
+
+	return 0;
+}
+
+static enum CT_AMIXER_CTL port_to_amixer(enum MIXER_PORT_T type)
+{
+	switch (type) {
+	case MIX_WAVE_FRONT:	return AMIXER_WAVE_F;
+	case MIX_WAVE_SURROUND:	return AMIXER_WAVE_S;
+	case MIX_WAVE_CENTLFE:	return AMIXER_WAVE_C;
+	case MIX_WAVE_REAR:	return AMIXER_WAVE_R;
+	case MIX_PCMO_FRONT:	return AMIXER_MASTER_F_C;
+	case MIX_SPDIF_OUT:	return AMIXER_SPDIFO;
+	case MIX_LINE_IN:	return AMIXER_LINEIN;
+	case MIX_MIC_IN:	return AMIXER_MIC;
+	case MIX_SPDIF_IN:	return AMIXER_SPDIFI;
+	case MIX_PCMI_FRONT:	return AMIXER_PCM_F;
+	case MIX_PCMI_SURROUND:	return AMIXER_PCM_S;
+	case MIX_PCMI_CENTLFE:	return AMIXER_PCM_C;
+	case MIX_PCMI_REAR:	return AMIXER_PCM_R;
+	default: 		return 0;
+	}
+}
+
+static int mixer_get_output_ports(struct ct_mixer *mixer,
+				  enum MIXER_PORT_T type,
+				  struct rsc **rleft, struct rsc **rright)
+{
+	enum CT_AMIXER_CTL amix = port_to_amixer(type);
+
+	if (NULL != rleft)
+		*rleft = &((struct amixer *)mixer->amixers[amix*CHN_NUM])->rsc;
+
+	if (NULL != rright)
+		*rright =
+			&((struct amixer *)mixer->amixers[amix*CHN_NUM+1])->rsc;
+
+	return 0;
+}
+
+static int mixer_set_input_left(struct ct_mixer *mixer,
+				enum MIXER_PORT_T type, struct rsc *rsc)
+{
+	enum CT_AMIXER_CTL amix = port_to_amixer(type);
+
+	mixer_set_input_port(mixer->amixers[amix*CHN_NUM], rsc);
+	amix = get_recording_amixer(amix);
+	if (amix < NUM_CT_AMIXERS)
+		mixer_set_input_port(mixer->amixers[amix*CHN_NUM], rsc);
+
+	return 0;
+}
+
+static int
+mixer_set_input_right(struct ct_mixer *mixer,
+		      enum MIXER_PORT_T type, struct rsc *rsc)
+{
+	enum CT_AMIXER_CTL amix = port_to_amixer(type);
+
+	mixer_set_input_port(mixer->amixers[amix*CHN_NUM+1], rsc);
+	amix = get_recording_amixer(amix);
+	if (amix < NUM_CT_AMIXERS)
+		mixer_set_input_port(mixer->amixers[amix*CHN_NUM+1], rsc);
+
+	return 0;
+}
+
+int ct_mixer_destroy(struct ct_mixer *mixer)
+{
+	struct sum_mgr *sum_mgr = (struct sum_mgr *)mixer->atc->rsc_mgrs[SUM];
+	struct amixer_mgr *amixer_mgr =
+			(struct amixer_mgr *)mixer->atc->rsc_mgrs[AMIXER];
+	struct amixer *amixer;
+	int i = 0;
+
+	/* Release amixer resources */
+	for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) {
+		if (NULL != mixer->amixers[i]) {
+			amixer = mixer->amixers[i];
+			amixer_mgr->put_amixer(amixer_mgr, amixer);
+		}
+	}
+
+	/* Release sum resources */
+	for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) {
+		if (NULL != mixer->sums[i])
+			sum_mgr->put_sum(sum_mgr, (struct sum *)mixer->sums[i]);
+	}
+
+	/* Release mem assigned to mixer object */
+	kfree(mixer->sums);
+	kfree(mixer->amixers);
+	kfree(mixer);
+
+	return 0;
+}
+
+int ct_mixer_create(struct ct_atc *atc, struct ct_mixer **rmixer)
+{
+	struct ct_mixer *mixer;
+	int err;
+
+	*rmixer = NULL;
+
+	/* Allocate mem for mixer obj */
+	err = ct_mixer_get_mem(&mixer);
+	if (err)
+		return err;
+
+	mixer->switch_state = 0;
+	mixer->atc = atc;
+	/* Set operations */
+	mixer->get_output_ports = mixer_get_output_ports;
+	mixer->set_input_left = mixer_set_input_left;
+	mixer->set_input_right = mixer_set_input_right;
+
+	/* Allocate chip resources for mixer obj */
+	err = ct_mixer_get_resources(mixer);
+	if (err)
+		goto error;
+
+	/* Build internal mixer topology */
+	ct_mixer_topology_build(mixer);
+
+	*rmixer = mixer;
+
+	return 0;
+
+error:
+	ct_mixer_destroy(mixer);
+	return err;
+}
+
+int ct_alsa_mix_create(struct ct_atc *atc,
+		       enum CTALSADEVS device,
+		       const char *device_name)
+{
+	int err;
+
+	/* Create snd kcontrol instances on demand */
+	/* vol_ctl.device = swh_ctl.device = device; */ /* better w/ device 0 */
+	err = ct_mixer_kcontrols_create((struct ct_mixer *)atc->mixer);
+	if (err)
+		return err;
+
+	strcpy(atc->card->mixername, device_name);
+
+	return 0;
+}
diff --git a/sound/pci/ctxfi/ctmixer.h b/sound/pci/ctxfi/ctmixer.h
new file mode 100644
index 0000000..e2d96eb
--- /dev/null
+++ b/sound/pci/ctxfi/ctmixer.h
@@ -0,0 +1,67 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctmixer.h
+ *
+ * @Brief
+ * This file contains the definition of the mixer device functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	Mar 28 2008
+ *
+ */
+
+#ifndef CTMIXER_H
+#define CTMIXER_H
+
+#include "ctatc.h"
+#include "ctresource.h"
+
+#define INIT_VOL	0x1c00
+
+enum MIXER_PORT_T {
+	MIX_WAVE_FRONT,
+	MIX_WAVE_REAR,
+	MIX_WAVE_CENTLFE,
+	MIX_WAVE_SURROUND,
+	MIX_SPDIF_OUT,
+	MIX_PCMO_FRONT,
+	MIX_MIC_IN,
+	MIX_LINE_IN,
+	MIX_SPDIF_IN,
+	MIX_PCMI_FRONT,
+	MIX_PCMI_REAR,
+	MIX_PCMI_CENTLFE,
+	MIX_PCMI_SURROUND,
+
+	NUM_MIX_PORTS
+};
+
+/* alsa mixer descriptor */
+struct ct_mixer {
+	struct ct_atc *atc;
+
+	void **amixers;		/* amixer resources for volume control */
+	void **sums;		/* sum resources for signal collection */
+	unsigned int switch_state; /* A bit-map to indicate state of switches */
+
+	int (*get_output_ports)(struct ct_mixer *mixer, enum MIXER_PORT_T type,
+				  struct rsc **rleft, struct rsc **rright);
+
+	int (*set_input_left)(struct ct_mixer *mixer,
+			      enum MIXER_PORT_T type, struct rsc *rsc);
+	int (*set_input_right)(struct ct_mixer *mixer,
+			       enum MIXER_PORT_T type, struct rsc *rsc);
+};
+
+int ct_alsa_mix_create(struct ct_atc *atc,
+		       enum CTALSADEVS device,
+		       const char *device_name);
+int ct_mixer_create(struct ct_atc *atc, struct ct_mixer **rmixer);
+int ct_mixer_destroy(struct ct_mixer *mixer);
+
+#endif /* CTMIXER_H */
diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c
new file mode 100644
index 0000000..9e5c0c4
--- /dev/null
+++ b/sound/pci/ctxfi/ctpcm.c
@@ -0,0 +1,426 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctpcm.c
+ *
+ * @Brief
+ * This file contains the definition of the pcm device functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	Apr 2 2008
+ *
+ */
+
+#include "ctpcm.h"
+#include "cttimer.h"
+#include <sound/pcm.h>
+
+/* Hardware descriptions for playback */
+static struct snd_pcm_hardware ct_pcm_playback_hw = {
+	.info			= (SNDRV_PCM_INFO_MMAP |
+				   SNDRV_PCM_INFO_INTERLEAVED |
+				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				   SNDRV_PCM_INFO_MMAP_VALID |
+				   SNDRV_PCM_INFO_PAUSE),
+	.formats		= (SNDRV_PCM_FMTBIT_U8 |
+				   SNDRV_PCM_FMTBIT_S16_LE |
+				   SNDRV_PCM_FMTBIT_S24_3LE |
+				   SNDRV_PCM_FMTBIT_S32_LE |
+				   SNDRV_PCM_FMTBIT_FLOAT_LE),
+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS |
+				   SNDRV_PCM_RATE_8000_192000),
+	.rate_min		= 8000,
+	.rate_max		= 192000,
+	.channels_min		= 1,
+	.channels_max		= 2,
+	.buffer_bytes_max	= (128*1024),
+	.period_bytes_min	= (64),
+	.period_bytes_max	= (128*1024),
+	.periods_min		= 2,
+	.periods_max		= 1024,
+	.fifo_size		= 0,
+};
+
+static struct snd_pcm_hardware ct_spdif_passthru_playback_hw = {
+	.info			= (SNDRV_PCM_INFO_MMAP |
+				   SNDRV_PCM_INFO_INTERLEAVED |
+				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				   SNDRV_PCM_INFO_MMAP_VALID |
+				   SNDRV_PCM_INFO_PAUSE),
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE,
+	.rates			= (SNDRV_PCM_RATE_48000 |
+				   SNDRV_PCM_RATE_44100 |
+				   SNDRV_PCM_RATE_32000),
+	.rate_min		= 32000,
+	.rate_max		= 48000,
+	.channels_min		= 2,
+	.channels_max		= 2,
+	.buffer_bytes_max	= (128*1024),
+	.period_bytes_min	= (64),
+	.period_bytes_max	= (128*1024),
+	.periods_min		= 2,
+	.periods_max		= 1024,
+	.fifo_size		= 0,
+};
+
+/* Hardware descriptions for capture */
+static struct snd_pcm_hardware ct_pcm_capture_hw = {
+	.info			= (SNDRV_PCM_INFO_MMAP |
+				   SNDRV_PCM_INFO_INTERLEAVED |
+				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				   SNDRV_PCM_INFO_PAUSE |
+				   SNDRV_PCM_INFO_MMAP_VALID),
+	.formats		= (SNDRV_PCM_FMTBIT_U8 |
+				   SNDRV_PCM_FMTBIT_S16_LE |
+				   SNDRV_PCM_FMTBIT_S24_3LE |
+				   SNDRV_PCM_FMTBIT_S32_LE |
+				   SNDRV_PCM_FMTBIT_FLOAT_LE),
+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS |
+				   SNDRV_PCM_RATE_8000_96000),
+	.rate_min		= 8000,
+	.rate_max		= 96000,
+	.channels_min		= 1,
+	.channels_max		= 2,
+	.buffer_bytes_max	= (128*1024),
+	.period_bytes_min	= (384),
+	.period_bytes_max	= (64*1024),
+	.periods_min		= 2,
+	.periods_max		= 1024,
+	.fifo_size		= 0,
+};
+
+static void ct_atc_pcm_interrupt(struct ct_atc_pcm *atc_pcm)
+{
+	struct ct_atc_pcm *apcm = atc_pcm;
+
+	if (NULL == apcm->substream)
+		return;
+
+	snd_pcm_period_elapsed(apcm->substream);
+}
+
+static void ct_atc_pcm_free_substream(struct snd_pcm_runtime *runtime)
+{
+	struct ct_atc_pcm *apcm = runtime->private_data;
+	struct ct_atc *atc = snd_pcm_substream_chip(apcm->substream);
+
+	atc->pcm_release_resources(atc, apcm);
+	ct_timer_instance_free(apcm->timer);
+	kfree(apcm);
+	runtime->private_data = NULL;
+}
+
+/* pcm playback operations */
+static int ct_pcm_playback_open(struct snd_pcm_substream *substream)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm;
+	int err;
+
+	apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
+	if (NULL == apcm)
+		return -ENOMEM;
+
+	apcm->substream = substream;
+	apcm->interrupt = ct_atc_pcm_interrupt;
+	runtime->private_data = apcm;
+	runtime->private_free = ct_atc_pcm_free_substream;
+	if (IEC958 == substream->pcm->device) {
+		runtime->hw = ct_spdif_passthru_playback_hw;
+		atc->spdif_out_passthru(atc, 1);
+	} else {
+		runtime->hw = ct_pcm_playback_hw;
+		if (FRONT == substream->pcm->device)
+			runtime->hw.channels_max = 8;
+	}
+
+	err = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0) {
+		kfree(apcm);
+		return err;
+	}
+	err = snd_pcm_hw_constraint_minmax(runtime,
+					   SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+					   1024, UINT_MAX);
+	if (err < 0) {
+		kfree(apcm);
+		return err;
+	}
+
+	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
+	if (!apcm->timer)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int ct_pcm_playback_close(struct snd_pcm_substream *substream)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+
+	/* TODO: Notify mixer inactive. */
+	if (IEC958 == substream->pcm->device)
+		atc->spdif_out_passthru(atc, 0);
+
+	/* The ct_atc_pcm object will be freed by runtime->private_free */
+
+	return 0;
+}
+
+static int ct_pcm_hw_params(struct snd_pcm_substream *substream,
+				     struct snd_pcm_hw_params *hw_params)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct ct_atc_pcm *apcm = substream->runtime->private_data;
+	int err;
+
+	err = snd_pcm_lib_malloc_pages(substream,
+					params_buffer_bytes(hw_params));
+	if (err < 0)
+		return err;
+	/* clear previous resources */
+	atc->pcm_release_resources(atc, apcm);
+	return err;
+}
+
+static int ct_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct ct_atc_pcm *apcm = substream->runtime->private_data;
+
+	/* clear previous resources */
+	atc->pcm_release_resources(atc, apcm);
+	/* Free snd-allocated pages */
+	return snd_pcm_lib_free_pages(substream);
+}
+
+
+static int ct_pcm_playback_prepare(struct snd_pcm_substream *substream)
+{
+	int err;
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	if (IEC958 == substream->pcm->device)
+		err = atc->spdif_passthru_playback_prepare(atc, apcm);
+	else
+		err = atc->pcm_playback_prepare(atc, apcm);
+
+	if (err < 0) {
+		printk(KERN_ERR "ctxfi: Preparing pcm playback failed!!!\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int
+ct_pcm_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		atc->pcm_playback_start(atc, apcm);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		atc->pcm_playback_stop(atc, apcm);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static snd_pcm_uframes_t
+ct_pcm_playback_pointer(struct snd_pcm_substream *substream)
+{
+	unsigned long position;
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	/* Read out playback position */
+	position = atc->pcm_playback_position(atc, apcm);
+	position = bytes_to_frames(runtime, position);
+	if (position >= runtime->buffer_size)
+		position = 0;
+	return position;
+}
+
+/* pcm capture operations */
+static int ct_pcm_capture_open(struct snd_pcm_substream *substream)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm;
+	int err;
+
+	apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
+	if (NULL == apcm)
+		return -ENOMEM;
+
+	apcm->started = 0;
+	apcm->substream = substream;
+	apcm->interrupt = ct_atc_pcm_interrupt;
+	runtime->private_data = apcm;
+	runtime->private_free = ct_atc_pcm_free_substream;
+	runtime->hw = ct_pcm_capture_hw;
+	runtime->hw.rate_max = atc->rsr * atc->msr;
+
+	err = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0) {
+		kfree(apcm);
+		return err;
+	}
+	err = snd_pcm_hw_constraint_minmax(runtime,
+					   SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+					   1024, UINT_MAX);
+	if (err < 0) {
+		kfree(apcm);
+		return err;
+	}
+
+	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
+	if (!apcm->timer)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int ct_pcm_capture_close(struct snd_pcm_substream *substream)
+{
+	/* The ct_atc_pcm object will be freed by runtime->private_free */
+	/* TODO: Notify mixer inactive. */
+	return 0;
+}
+
+static int ct_pcm_capture_prepare(struct snd_pcm_substream *substream)
+{
+	int err;
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	err = atc->pcm_capture_prepare(atc, apcm);
+	if (err < 0) {
+		printk(KERN_ERR "ctxfi: Preparing pcm capture failed!!!\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int
+ct_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		atc->pcm_capture_start(atc, apcm);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		atc->pcm_capture_stop(atc, apcm);
+		break;
+	default:
+		atc->pcm_capture_stop(atc, apcm);
+		break;
+	}
+
+	return 0;
+}
+
+static snd_pcm_uframes_t
+ct_pcm_capture_pointer(struct snd_pcm_substream *substream)
+{
+	unsigned long position;
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	/* Read out playback position */
+	position = atc->pcm_capture_position(atc, apcm);
+	position = bytes_to_frames(runtime, position);
+	if (position >= runtime->buffer_size)
+		position = 0;
+	return position;
+}
+
+/* PCM operators for playback */
+static struct snd_pcm_ops ct_pcm_playback_ops = {
+	.open	 	= ct_pcm_playback_open,
+	.close		= ct_pcm_playback_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= ct_pcm_hw_params,
+	.hw_free	= ct_pcm_hw_free,
+	.prepare	= ct_pcm_playback_prepare,
+	.trigger	= ct_pcm_playback_trigger,
+	.pointer	= ct_pcm_playback_pointer,
+	.page		= snd_pcm_sgbuf_ops_page,
+};
+
+/* PCM operators for capture */
+static struct snd_pcm_ops ct_pcm_capture_ops = {
+	.open	 	= ct_pcm_capture_open,
+	.close		= ct_pcm_capture_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= ct_pcm_hw_params,
+	.hw_free	= ct_pcm_hw_free,
+	.prepare	= ct_pcm_capture_prepare,
+	.trigger	= ct_pcm_capture_trigger,
+	.pointer	= ct_pcm_capture_pointer,
+	.page		= snd_pcm_sgbuf_ops_page,
+};
+
+/* Create ALSA pcm device */
+int ct_alsa_pcm_create(struct ct_atc *atc,
+		       enum CTALSADEVS device,
+		       const char *device_name)
+{
+	struct snd_pcm *pcm;
+	int err;
+	int playback_count, capture_count;
+
+	playback_count = (IEC958 == device) ? 1 : 8;
+	capture_count = (FRONT == device) ? 1 : 0;
+	err = snd_pcm_new(atc->card, "ctxfi", device,
+			  playback_count, capture_count, &pcm);
+	if (err < 0) {
+		printk(KERN_ERR "ctxfi: snd_pcm_new failed!! Err=%d\n", err);
+		return err;
+	}
+
+	pcm->private_data = atc;
+	pcm->info_flags = 0;
+	pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX;
+	strlcpy(pcm->name, device_name, sizeof(pcm->name));
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &ct_pcm_playback_ops);
+
+	if (FRONT == device)
+		snd_pcm_set_ops(pcm,
+				SNDRV_PCM_STREAM_CAPTURE, &ct_pcm_capture_ops);
+
+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV_SG,
+			snd_dma_pci_data(atc->pci), 128*1024, 128*1024);
+
+	return 0;
+}
diff --git a/sound/pci/ctxfi/ctpcm.h b/sound/pci/ctxfi/ctpcm.h
new file mode 100644
index 0000000..178da0d
--- /dev/null
+++ b/sound/pci/ctxfi/ctpcm.h
@@ -0,0 +1,27 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctpcm.h
+ *
+ * @Brief
+ * This file contains the definition of the pcm device functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	Mar 28 2008
+ *
+ */
+
+#ifndef CTPCM_H
+#define CTPCM_H
+
+#include "ctatc.h"
+
+int ct_alsa_pcm_create(struct ct_atc *atc,
+		       enum CTALSADEVS device,
+		       const char *device_name);
+
+#endif /* CTPCM_H */
diff --git a/sound/pci/ctxfi/ctresource.c b/sound/pci/ctxfi/ctresource.c
new file mode 100644
index 0000000..889c495
--- /dev/null
+++ b/sound/pci/ctxfi/ctresource.c
@@ -0,0 +1,301 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctresource.c
+ *
+ * @Brief
+ * This file contains the implementation of some generic helper functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 15 2008
+ *
+ */
+
+#include "ctresource.h"
+#include "cthardware.h"
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#define AUDIO_SLOT_BLOCK_NUM 	256
+
+/* Resource allocation based on bit-map management mechanism */
+static int
+get_resource(u8 *rscs, unsigned int amount,
+	     unsigned int multi, unsigned int *ridx)
+{
+	int i, j, k, n;
+
+	/* Check whether there are sufficient resources to meet request. */
+	for (i = 0, n = multi; i < amount; i++) {
+		j = i / 8;
+		k = i % 8;
+		if (rscs[j] & ((u8)1 << k)) {
+			n = multi;
+			continue;
+		}
+		if (!(--n))
+			break; /* found sufficient contiguous resources */
+	}
+
+	if (i >= amount) {
+		/* Can not find sufficient contiguous resources */
+		return -ENOENT;
+	}
+
+	/* Mark the contiguous bits in resource bit-map as used */
+	for (n = multi; n > 0; n--) {
+		j = i / 8;
+		k = i % 8;
+		rscs[j] |= ((u8)1 << k);
+		i--;
+	}
+
+	*ridx = i + 1;
+
+	return 0;
+}
+
+static int put_resource(u8 *rscs, unsigned int multi, unsigned int idx)
+{
+	unsigned int i, j, k, n;
+
+	/* Mark the contiguous bits in resource bit-map as used */
+	for (n = multi, i = idx; n > 0; n--) {
+		j = i / 8;
+		k = i % 8;
+		rscs[j] &= ~((u8)1 << k);
+		i++;
+	}
+
+	return 0;
+}
+
+int mgr_get_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int *ridx)
+{
+	int err;
+
+	if (n > mgr->avail)
+		return -ENOENT;
+
+	err = get_resource(mgr->rscs, mgr->amount, n, ridx);
+	if (!err)
+		mgr->avail -= n;
+
+	return err;
+}
+
+int mgr_put_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int idx)
+{
+	put_resource(mgr->rscs, n, idx);
+	mgr->avail += n;
+
+	return 0;
+}
+
+static unsigned char offset_in_audio_slot_block[NUM_RSCTYP] = {
+	/* SRC channel is at Audio Ring slot 1 every 16 slots. */
+	[SRC]		= 0x1,
+	[AMIXER]	= 0x4,
+	[SUM]		= 0xc,
+};
+
+static int rsc_index(const struct rsc *rsc)
+{
+    return rsc->conj;
+}
+
+static int audio_ring_slot(const struct rsc *rsc)
+{
+    return (rsc->conj << 4) + offset_in_audio_slot_block[rsc->type];
+}
+
+static int rsc_next_conj(struct rsc *rsc)
+{
+	unsigned int i;
+	for (i = 0; (i < 8) && (!(rsc->msr & (0x1 << i))); )
+		i++;
+	rsc->conj += (AUDIO_SLOT_BLOCK_NUM >> i);
+	return rsc->conj;
+}
+
+static int rsc_master(struct rsc *rsc)
+{
+	return rsc->conj = rsc->idx;
+}
+
+static struct rsc_ops rsc_generic_ops = {
+	.index		= rsc_index,
+	.output_slot	= audio_ring_slot,
+	.master		= rsc_master,
+	.next_conj	= rsc_next_conj,
+};
+
+int rsc_init(struct rsc *rsc, u32 idx, enum RSCTYP type, u32 msr, void *hw)
+{
+	int err = 0;
+
+	rsc->idx = idx;
+	rsc->conj = idx;
+	rsc->type = type;
+	rsc->msr = msr;
+	rsc->hw = hw;
+	rsc->ops = &rsc_generic_ops;
+	if (NULL == hw) {
+		rsc->ctrl_blk = NULL;
+		return 0;
+	}
+
+	switch (type) {
+	case SRC:
+		err = ((struct hw *)hw)->src_rsc_get_ctrl_blk(&rsc->ctrl_blk);
+		break;
+	case AMIXER:
+		err = ((struct hw *)hw)->
+				amixer_rsc_get_ctrl_blk(&rsc->ctrl_blk);
+		break;
+	case SRCIMP:
+	case SUM:
+	case DAIO:
+		break;
+	default:
+		printk(KERN_ERR
+		       "ctxfi: Invalid resource type value %d!\n", type);
+		return -EINVAL;
+	}
+
+	if (err) {
+		printk(KERN_ERR
+		       "ctxfi: Failed to get resource control block!\n");
+		return err;
+	}
+
+	return 0;
+}
+
+int rsc_uninit(struct rsc *rsc)
+{
+	if ((NULL != rsc->hw) && (NULL != rsc->ctrl_blk)) {
+		switch (rsc->type) {
+		case SRC:
+			((struct hw *)rsc->hw)->
+				src_rsc_put_ctrl_blk(rsc->ctrl_blk);
+			break;
+		case AMIXER:
+			((struct hw *)rsc->hw)->
+				amixer_rsc_put_ctrl_blk(rsc->ctrl_blk);
+			break;
+		case SUM:
+		case DAIO:
+			break;
+		default:
+			printk(KERN_ERR "ctxfi: "
+			       "Invalid resource type value %d!\n", rsc->type);
+			break;
+		}
+
+		rsc->hw = rsc->ctrl_blk = NULL;
+	}
+
+	rsc->idx = rsc->conj = 0;
+	rsc->type = NUM_RSCTYP;
+	rsc->msr = 0;
+
+	return 0;
+}
+
+int rsc_mgr_init(struct rsc_mgr *mgr, enum RSCTYP type,
+		 unsigned int amount, void *hw_obj)
+{
+	int err = 0;
+	struct hw *hw = hw_obj;
+
+	mgr->type = NUM_RSCTYP;
+
+	mgr->rscs = kzalloc(((amount + 8 - 1) / 8), GFP_KERNEL);
+	if (NULL == mgr->rscs)
+		return -ENOMEM;
+
+	switch (type) {
+	case SRC:
+		err = hw->src_mgr_get_ctrl_blk(&mgr->ctrl_blk);
+		break;
+	case SRCIMP:
+		err = hw->srcimp_mgr_get_ctrl_blk(&mgr->ctrl_blk);
+		break;
+	case AMIXER:
+		err = hw->amixer_mgr_get_ctrl_blk(&mgr->ctrl_blk);
+		break;
+	case DAIO:
+		err = hw->daio_mgr_get_ctrl_blk(hw, &mgr->ctrl_blk);
+		break;
+	case SUM:
+		break;
+	default:
+		printk(KERN_ERR
+		       "ctxfi: Invalid resource type value %d!\n", type);
+		err = -EINVAL;
+		goto error;
+	}
+
+	if (err) {
+		printk(KERN_ERR
+		       "ctxfi: Failed to get manager control block!\n");
+		goto error;
+	}
+
+	mgr->type = type;
+	mgr->avail = mgr->amount = amount;
+	mgr->hw = hw;
+
+	return 0;
+
+error:
+	kfree(mgr->rscs);
+	return err;
+}
+
+int rsc_mgr_uninit(struct rsc_mgr *mgr)
+{
+	if (NULL != mgr->rscs) {
+		kfree(mgr->rscs);
+		mgr->rscs = NULL;
+	}
+
+	if ((NULL != mgr->hw) && (NULL != mgr->ctrl_blk)) {
+		switch (mgr->type) {
+		case SRC:
+			((struct hw *)mgr->hw)->
+				src_mgr_put_ctrl_blk(mgr->ctrl_blk);
+			break;
+		case SRCIMP:
+			((struct hw *)mgr->hw)->
+				srcimp_mgr_put_ctrl_blk(mgr->ctrl_blk);
+			break;
+		case AMIXER:
+			((struct hw *)mgr->hw)->
+				amixer_mgr_put_ctrl_blk(mgr->ctrl_blk);
+			break;
+		case DAIO:
+			((struct hw *)mgr->hw)->
+				daio_mgr_put_ctrl_blk(mgr->ctrl_blk);
+			break;
+		case SUM:
+			break;
+		default:
+			printk(KERN_ERR "ctxfi: "
+			       "Invalid resource type value %d!\n", mgr->type);
+			break;
+		}
+
+		mgr->hw = mgr->ctrl_blk = NULL;
+	}
+
+	mgr->type = NUM_RSCTYP;
+	mgr->avail = mgr->amount = 0;
+
+	return 0;
+}
diff --git a/sound/pci/ctxfi/ctresource.h b/sound/pci/ctxfi/ctresource.h
new file mode 100644
index 0000000..0838c2e
--- /dev/null
+++ b/sound/pci/ctxfi/ctresource.h
@@ -0,0 +1,72 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctresource.h
+ *
+ * @Brief
+ * This file contains the definition of generic hardware resources for
+ * resource management.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTRESOURCE_H
+#define CTRESOURCE_H
+
+#include <linux/types.h>
+
+enum RSCTYP {
+	SRC,
+	SRCIMP,
+	AMIXER,
+	SUM,
+	DAIO,
+	NUM_RSCTYP	/* This must be the last one and less than 16 */
+};
+
+struct rsc_ops;
+
+struct rsc {
+	u32 idx:12;	/* The index of a resource */
+	u32 type:4;	/* The type (RSCTYP) of a resource */
+	u32 conj:12;	/* Current conjugate index */
+	u32 msr:4;	/* The Master Sample Rate a resource working on */
+	void *ctrl_blk;	/* Chip specific control info block for a resource */
+	void *hw;	/* Chip specific object for hardware access means */
+	struct rsc_ops *ops;	/* Generic resource operations */
+};
+
+struct rsc_ops {
+	int (*master)(struct rsc *rsc);	/* Move to master resource */
+	int (*next_conj)(struct rsc *rsc); /* Move to next conjugate resource */
+	int (*index)(const struct rsc *rsc); /* Return the index of resource */
+	/* Return the output slot number */
+	int (*output_slot)(const struct rsc *rsc);
+};
+
+int rsc_init(struct rsc *rsc, u32 idx, enum RSCTYP type, u32 msr, void *hw);
+int rsc_uninit(struct rsc *rsc);
+
+struct rsc_mgr {
+	enum RSCTYP type; /* The type (RSCTYP) of resource to manage */
+	unsigned int amount; /* The total amount of a kind of resource */
+	unsigned int avail; /* The amount of currently available resources */
+	unsigned char *rscs; /* The bit-map for resource allocation */
+	void *ctrl_blk; /* Chip specific control info block */
+	void *hw; /* Chip specific object for hardware access */
+};
+
+/* Resource management is based on bit-map mechanism */
+int rsc_mgr_init(struct rsc_mgr *mgr, enum RSCTYP type,
+		 unsigned int amount, void *hw);
+int rsc_mgr_uninit(struct rsc_mgr *mgr);
+int mgr_get_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int *ridx);
+int mgr_put_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int idx);
+
+#endif /* CTRESOURCE_H */
diff --git a/sound/pci/ctxfi/ctsrc.c b/sound/pci/ctxfi/ctsrc.c
new file mode 100644
index 0000000..e1c145d
--- /dev/null
+++ b/sound/pci/ctxfi/ctsrc.c
@@ -0,0 +1,886 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctsrc.c
+ *
+ * @Brief
+ * This file contains the implementation of the Sample Rate Convertor
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#include "ctsrc.h"
+#include "cthardware.h"
+#include <linux/slab.h>
+
+#define SRC_RESOURCE_NUM	64
+#define SRCIMP_RESOURCE_NUM	256
+
+static unsigned int conj_mask;
+
+static int src_default_config_memrd(struct src *src);
+static int src_default_config_memwr(struct src *src);
+static int src_default_config_arcrw(struct src *src);
+
+static int (*src_default_config[3])(struct src *) = {
+	[MEMRD] = src_default_config_memrd,
+	[MEMWR] = src_default_config_memwr,
+	[ARCRW] = src_default_config_arcrw
+};
+
+static int src_set_state(struct src *src, unsigned int state)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_state(src->rsc.ctrl_blk, state);
+
+	return 0;
+}
+
+static int src_set_bm(struct src *src, unsigned int bm)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_bm(src->rsc.ctrl_blk, bm);
+
+	return 0;
+}
+
+static int src_set_sf(struct src *src, unsigned int sf)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_sf(src->rsc.ctrl_blk, sf);
+
+	return 0;
+}
+
+static int src_set_pm(struct src *src, unsigned int pm)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_pm(src->rsc.ctrl_blk, pm);
+
+	return 0;
+}
+
+static int src_set_rom(struct src *src, unsigned int rom)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_rom(src->rsc.ctrl_blk, rom);
+
+	return 0;
+}
+
+static int src_set_vo(struct src *src, unsigned int vo)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_vo(src->rsc.ctrl_blk, vo);
+
+	return 0;
+}
+
+static int src_set_st(struct src *src, unsigned int st)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_st(src->rsc.ctrl_blk, st);
+
+	return 0;
+}
+
+static int src_set_bp(struct src *src, unsigned int bp)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_bp(src->rsc.ctrl_blk, bp);
+
+	return 0;
+}
+
+static int src_set_cisz(struct src *src, unsigned int cisz)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_cisz(src->rsc.ctrl_blk, cisz);
+
+	return 0;
+}
+
+static int src_set_ca(struct src *src, unsigned int ca)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_ca(src->rsc.ctrl_blk, ca);
+
+	return 0;
+}
+
+static int src_set_sa(struct src *src, unsigned int sa)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_sa(src->rsc.ctrl_blk, sa);
+
+	return 0;
+}
+
+static int src_set_la(struct src *src, unsigned int la)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_la(src->rsc.ctrl_blk, la);
+
+	return 0;
+}
+
+static int src_set_pitch(struct src *src, unsigned int pitch)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_pitch(src->rsc.ctrl_blk, pitch);
+
+	return 0;
+}
+
+static int src_set_clear_zbufs(struct src *src)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1);
+
+	return 0;
+}
+
+static int src_commit_write(struct src *src)
+{
+	struct hw *hw;
+	int i;
+	unsigned int dirty = 0;
+
+	hw = src->rsc.hw;
+	src->rsc.ops->master(&src->rsc);
+	if (src->rsc.msr > 1) {
+		/* Save dirty flags for conjugate resource programming */
+		dirty = hw->src_get_dirty(src->rsc.ctrl_blk) & conj_mask;
+	}
+	hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+						src->rsc.ctrl_blk);
+
+	/* Program conjugate parameter mixer resources */
+	if (MEMWR == src->mode)
+		return 0;
+
+	for (i = 1; i < src->rsc.msr; i++) {
+		src->rsc.ops->next_conj(&src->rsc);
+		hw->src_set_dirty(src->rsc.ctrl_blk, dirty);
+		hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+							src->rsc.ctrl_blk);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_get_ca(struct src *src)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	return hw->src_get_ca(hw, src->rsc.ops->index(&src->rsc),
+						src->rsc.ctrl_blk);
+}
+
+static int src_init(struct src *src)
+{
+	src_default_config[src->mode](src);
+
+	return 0;
+}
+
+static struct src *src_next_interleave(struct src *src)
+{
+	return src->intlv;
+}
+
+static int src_default_config_memrd(struct src *src)
+{
+	struct hw *hw = src->rsc.hw;
+	unsigned int rsr, msr;
+
+	hw->src_set_state(src->rsc.ctrl_blk, SRC_STATE_OFF);
+	hw->src_set_bm(src->rsc.ctrl_blk, 1);
+	for (rsr = 0, msr = src->rsc.msr; msr > 1; msr >>= 1)
+		rsr++;
+
+	hw->src_set_rsr(src->rsc.ctrl_blk, rsr);
+	hw->src_set_sf(src->rsc.ctrl_blk, SRC_SF_S16);
+	hw->src_set_wr(src->rsc.ctrl_blk, 0);
+	hw->src_set_pm(src->rsc.ctrl_blk, 0);
+	hw->src_set_rom(src->rsc.ctrl_blk, 0);
+	hw->src_set_vo(src->rsc.ctrl_blk, 0);
+	hw->src_set_st(src->rsc.ctrl_blk, 0);
+	hw->src_set_ilsz(src->rsc.ctrl_blk, src->multi - 1);
+	hw->src_set_cisz(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_sa(src->rsc.ctrl_blk, 0x0);
+	hw->src_set_la(src->rsc.ctrl_blk, 0x1000);
+	hw->src_set_ca(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000);
+	hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1);
+
+	src->rsc.ops->master(&src->rsc);
+	hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+						src->rsc.ctrl_blk);
+
+	for (msr = 1; msr < src->rsc.msr; msr++) {
+		src->rsc.ops->next_conj(&src->rsc);
+		hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000);
+		hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+							src->rsc.ctrl_blk);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_default_config_memwr(struct src *src)
+{
+	struct hw *hw = src->rsc.hw;
+
+	hw->src_set_state(src->rsc.ctrl_blk, SRC_STATE_OFF);
+	hw->src_set_bm(src->rsc.ctrl_blk, 1);
+	hw->src_set_rsr(src->rsc.ctrl_blk, 0);
+	hw->src_set_sf(src->rsc.ctrl_blk, SRC_SF_S16);
+	hw->src_set_wr(src->rsc.ctrl_blk, 1);
+	hw->src_set_pm(src->rsc.ctrl_blk, 0);
+	hw->src_set_rom(src->rsc.ctrl_blk, 0);
+	hw->src_set_vo(src->rsc.ctrl_blk, 0);
+	hw->src_set_st(src->rsc.ctrl_blk, 0);
+	hw->src_set_ilsz(src->rsc.ctrl_blk, 0);
+	hw->src_set_cisz(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_sa(src->rsc.ctrl_blk, 0x0);
+	hw->src_set_la(src->rsc.ctrl_blk, 0x1000);
+	hw->src_set_ca(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000);
+	hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1);
+
+	src->rsc.ops->master(&src->rsc);
+	hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+						src->rsc.ctrl_blk);
+
+	return 0;
+}
+
+static int src_default_config_arcrw(struct src *src)
+{
+	struct hw *hw = src->rsc.hw;
+	unsigned int rsr, msr;
+	unsigned int dirty;
+
+	hw->src_set_state(src->rsc.ctrl_blk, SRC_STATE_OFF);
+	hw->src_set_bm(src->rsc.ctrl_blk, 0);
+	for (rsr = 0, msr = src->rsc.msr; msr > 1; msr >>= 1)
+		rsr++;
+
+	hw->src_set_rsr(src->rsc.ctrl_blk, rsr);
+	hw->src_set_sf(src->rsc.ctrl_blk, SRC_SF_F32);
+	hw->src_set_wr(src->rsc.ctrl_blk, 0);
+	hw->src_set_pm(src->rsc.ctrl_blk, 0);
+	hw->src_set_rom(src->rsc.ctrl_blk, 0);
+	hw->src_set_vo(src->rsc.ctrl_blk, 0);
+	hw->src_set_st(src->rsc.ctrl_blk, 0);
+	hw->src_set_ilsz(src->rsc.ctrl_blk, 0);
+	hw->src_set_cisz(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_sa(src->rsc.ctrl_blk, 0x0);
+	/*hw->src_set_sa(src->rsc.ctrl_blk, 0x100);*/
+	hw->src_set_la(src->rsc.ctrl_blk, 0x1000);
+	/*hw->src_set_la(src->rsc.ctrl_blk, 0x03ffffe0);*/
+	hw->src_set_ca(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000);
+	hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1);
+
+	dirty = hw->src_get_dirty(src->rsc.ctrl_blk);
+	src->rsc.ops->master(&src->rsc);
+	for (msr = 0; msr < src->rsc.msr; msr++) {
+		hw->src_set_dirty(src->rsc.ctrl_blk, dirty);
+		hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+							src->rsc.ctrl_blk);
+		src->rsc.ops->next_conj(&src->rsc);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static struct src_rsc_ops src_rsc_ops = {
+	.set_state		= src_set_state,
+	.set_bm			= src_set_bm,
+	.set_sf			= src_set_sf,
+	.set_pm			= src_set_pm,
+	.set_rom		= src_set_rom,
+	.set_vo			= src_set_vo,
+	.set_st			= src_set_st,
+	.set_bp			= src_set_bp,
+	.set_cisz		= src_set_cisz,
+	.set_ca			= src_set_ca,
+	.set_sa			= src_set_sa,
+	.set_la			= src_set_la,
+	.set_pitch		= src_set_pitch,
+	.set_clr_zbufs		= src_set_clear_zbufs,
+	.commit_write		= src_commit_write,
+	.get_ca			= src_get_ca,
+	.init			= src_init,
+	.next_interleave	= src_next_interleave,
+};
+
+static int
+src_rsc_init(struct src *src, u32 idx,
+	     const struct src_desc *desc, struct src_mgr *mgr)
+{
+	int err;
+	int i, n;
+	struct src *p;
+
+	n = (MEMRD == desc->mode) ? desc->multi : 1;
+	for (i = 0, p = src; i < n; i++, p++) {
+		err = rsc_init(&p->rsc, idx + i, SRC, desc->msr, mgr->mgr.hw);
+		if (err)
+			goto error1;
+
+		/* Initialize src specific rsc operations */
+		p->ops = &src_rsc_ops;
+		p->multi = (0 == i) ? desc->multi : 1;
+		p->mode = desc->mode;
+		src_default_config[desc->mode](p);
+		mgr->src_enable(mgr, p);
+		p->intlv = p + 1;
+	}
+	(--p)->intlv = NULL;	/* Set @intlv of the last SRC to NULL */
+
+	mgr->commit_write(mgr);
+
+	return 0;
+
+error1:
+	for (i--, p--; i >= 0; i--, p--) {
+		mgr->src_disable(mgr, p);
+		rsc_uninit(&p->rsc);
+	}
+	mgr->commit_write(mgr);
+	return err;
+}
+
+static int src_rsc_uninit(struct src *src, struct src_mgr *mgr)
+{
+	int i, n;
+	struct src *p;
+
+	n = (MEMRD == src->mode) ? src->multi : 1;
+	for (i = 0, p = src; i < n; i++, p++) {
+		mgr->src_disable(mgr, p);
+		rsc_uninit(&p->rsc);
+		p->multi = 0;
+		p->ops = NULL;
+		p->mode = NUM_SRCMODES;
+		p->intlv = NULL;
+	}
+	mgr->commit_write(mgr);
+
+	return 0;
+}
+
+static int
+get_src_rsc(struct src_mgr *mgr, const struct src_desc *desc, struct src **rsrc)
+{
+	unsigned int idx = SRC_RESOURCE_NUM;
+	int err;
+	struct src *src;
+	unsigned long flags;
+
+	*rsrc = NULL;
+
+	/* Check whether there are sufficient src resources to meet request. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	if (MEMRD == desc->mode)
+		err = mgr_get_resource(&mgr->mgr, desc->multi, &idx);
+	else
+		err = mgr_get_resource(&mgr->mgr, 1, &idx);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Can't meet SRC resource request!\n");
+		return err;
+	}
+
+	/* Allocate mem for master src resource */
+	if (MEMRD == desc->mode)
+		src = kzalloc(sizeof(*src)*desc->multi, GFP_KERNEL);
+	else
+		src = kzalloc(sizeof(*src), GFP_KERNEL);
+
+	if (NULL == src) {
+		err = -ENOMEM;
+		goto error1;
+	}
+
+	err = src_rsc_init(src, idx, desc, mgr);
+	if (err)
+		goto error2;
+
+	*rsrc = src;
+
+	return 0;
+
+error2:
+	kfree(src);
+error1:
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	if (MEMRD == desc->mode)
+		mgr_put_resource(&mgr->mgr, desc->multi, idx);
+	else
+		mgr_put_resource(&mgr->mgr, 1, idx);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	return err;
+}
+
+static int put_src_rsc(struct src_mgr *mgr, struct src *src)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	src->rsc.ops->master(&src->rsc);
+	if (MEMRD == src->mode)
+		mgr_put_resource(&mgr->mgr, src->multi,
+				 src->rsc.ops->index(&src->rsc));
+	else
+		mgr_put_resource(&mgr->mgr, 1, src->rsc.ops->index(&src->rsc));
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	src_rsc_uninit(src, mgr);
+	kfree(src);
+
+	return 0;
+}
+
+static int src_enable_s(struct src_mgr *mgr, struct src *src)
+{
+	struct hw *hw = mgr->mgr.hw;
+	int i;
+
+	src->rsc.ops->master(&src->rsc);
+	for (i = 0; i < src->rsc.msr; i++) {
+		hw->src_mgr_enbs_src(mgr->mgr.ctrl_blk,
+				     src->rsc.ops->index(&src->rsc));
+		src->rsc.ops->next_conj(&src->rsc);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_enable(struct src_mgr *mgr, struct src *src)
+{
+	struct hw *hw = mgr->mgr.hw;
+	int i;
+
+	src->rsc.ops->master(&src->rsc);
+	for (i = 0; i < src->rsc.msr; i++) {
+		hw->src_mgr_enb_src(mgr->mgr.ctrl_blk,
+				    src->rsc.ops->index(&src->rsc));
+		src->rsc.ops->next_conj(&src->rsc);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_disable(struct src_mgr *mgr, struct src *src)
+{
+	struct hw *hw = mgr->mgr.hw;
+	int i;
+
+	src->rsc.ops->master(&src->rsc);
+	for (i = 0; i < src->rsc.msr; i++) {
+		hw->src_mgr_dsb_src(mgr->mgr.ctrl_blk,
+				    src->rsc.ops->index(&src->rsc));
+		src->rsc.ops->next_conj(&src->rsc);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_mgr_commit_write(struct src_mgr *mgr)
+{
+	struct hw *hw = mgr->mgr.hw;
+
+	hw->src_mgr_commit_write(hw, mgr->mgr.ctrl_blk);
+
+	return 0;
+}
+
+int src_mgr_create(void *hw, struct src_mgr **rsrc_mgr)
+{
+	int err, i;
+	struct src_mgr *src_mgr;
+
+	*rsrc_mgr = NULL;
+	src_mgr = kzalloc(sizeof(*src_mgr), GFP_KERNEL);
+	if (NULL == src_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&src_mgr->mgr, SRC, SRC_RESOURCE_NUM, hw);
+	if (err)
+		goto error1;
+
+	spin_lock_init(&src_mgr->mgr_lock);
+	conj_mask = ((struct hw *)hw)->src_dirty_conj_mask();
+
+	src_mgr->get_src = get_src_rsc;
+	src_mgr->put_src = put_src_rsc;
+	src_mgr->src_enable_s = src_enable_s;
+	src_mgr->src_enable = src_enable;
+	src_mgr->src_disable = src_disable;
+	src_mgr->commit_write = src_mgr_commit_write;
+
+	/* Disable all SRC resources. */
+	for (i = 0; i < 256; i++)
+		((struct hw *)hw)->src_mgr_dsb_src(src_mgr->mgr.ctrl_blk, i);
+
+	((struct hw *)hw)->src_mgr_commit_write(hw, src_mgr->mgr.ctrl_blk);
+
+	*rsrc_mgr = src_mgr;
+
+	return 0;
+
+error1:
+	kfree(src_mgr);
+	return err;
+}
+
+int src_mgr_destroy(struct src_mgr *src_mgr)
+{
+	rsc_mgr_uninit(&src_mgr->mgr);
+	kfree(src_mgr);
+
+	return 0;
+}
+
+/* SRCIMP resource manager operations */
+
+static int srcimp_master(struct rsc *rsc)
+{
+	rsc->conj = 0;
+	return rsc->idx = container_of(rsc, struct srcimp, rsc)->idx[0];
+}
+
+static int srcimp_next_conj(struct rsc *rsc)
+{
+	rsc->conj++;
+	return container_of(rsc, struct srcimp, rsc)->idx[rsc->conj];
+}
+
+static int srcimp_index(const struct rsc *rsc)
+{
+	return container_of(rsc, struct srcimp, rsc)->idx[rsc->conj];
+}
+
+static struct rsc_ops srcimp_basic_rsc_ops = {
+	.master		= srcimp_master,
+	.next_conj	= srcimp_next_conj,
+	.index		= srcimp_index,
+	.output_slot	= NULL,
+};
+
+static int srcimp_map(struct srcimp *srcimp, struct src *src, struct rsc *input)
+{
+	struct imapper *entry;
+	int i;
+
+	srcimp->rsc.ops->master(&srcimp->rsc);
+	src->rsc.ops->master(&src->rsc);
+	input->ops->master(input);
+
+	/* Program master and conjugate resources */
+	for (i = 0; i < srcimp->rsc.msr; i++) {
+		entry = &srcimp->imappers[i];
+		entry->slot = input->ops->output_slot(input);
+		entry->user = src->rsc.ops->index(&src->rsc);
+		entry->addr = srcimp->rsc.ops->index(&srcimp->rsc);
+		srcimp->mgr->imap_add(srcimp->mgr, entry);
+		srcimp->mapped |= (0x1 << i);
+
+		srcimp->rsc.ops->next_conj(&srcimp->rsc);
+		input->ops->next_conj(input);
+	}
+
+	srcimp->rsc.ops->master(&srcimp->rsc);
+	input->ops->master(input);
+
+	return 0;
+}
+
+static int srcimp_unmap(struct srcimp *srcimp)
+{
+	int i;
+
+	/* Program master and conjugate resources */
+	for (i = 0; i < srcimp->rsc.msr; i++) {
+		if (srcimp->mapped & (0x1 << i)) {
+			srcimp->mgr->imap_delete(srcimp->mgr,
+						 &srcimp->imappers[i]);
+			srcimp->mapped &= ~(0x1 << i);
+		}
+	}
+
+	return 0;
+}
+
+static struct srcimp_rsc_ops srcimp_ops = {
+	.map = srcimp_map,
+	.unmap = srcimp_unmap
+};
+
+static int srcimp_rsc_init(struct srcimp *srcimp,
+			   const struct srcimp_desc *desc,
+			   struct srcimp_mgr *mgr)
+{
+	int err;
+
+	err = rsc_init(&srcimp->rsc, srcimp->idx[0],
+		       SRCIMP, desc->msr, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	/* Reserve memory for imapper nodes */
+	srcimp->imappers = kzalloc(sizeof(struct imapper)*desc->msr,
+				   GFP_KERNEL);
+	if (NULL == srcimp->imappers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+
+	/* Set srcimp specific operations */
+	srcimp->rsc.ops = &srcimp_basic_rsc_ops;
+	srcimp->ops = &srcimp_ops;
+	srcimp->mgr = mgr;
+
+	srcimp->rsc.ops->master(&srcimp->rsc);
+
+	return 0;
+
+error1:
+	rsc_uninit(&srcimp->rsc);
+	return err;
+}
+
+static int srcimp_rsc_uninit(struct srcimp *srcimp)
+{
+	if (NULL != srcimp->imappers) {
+		kfree(srcimp->imappers);
+		srcimp->imappers = NULL;
+	}
+	srcimp->ops = NULL;
+	srcimp->mgr = NULL;
+	rsc_uninit(&srcimp->rsc);
+
+	return 0;
+}
+
+static int get_srcimp_rsc(struct srcimp_mgr *mgr,
+			  const struct srcimp_desc *desc,
+			  struct srcimp **rsrcimp)
+{
+	int err, i;
+	unsigned int idx;
+	struct srcimp *srcimp;
+	unsigned long flags;
+
+	*rsrcimp = NULL;
+
+	/* Allocate mem for SRCIMP resource */
+	srcimp = kzalloc(sizeof(*srcimp), GFP_KERNEL);
+	if (NULL == srcimp) {
+		err = -ENOMEM;
+		return err;
+	}
+
+	/* Check whether there are sufficient SRCIMP resources. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < desc->msr; i++) {
+		err = mgr_get_resource(&mgr->mgr, 1, &idx);
+		if (err)
+			break;
+
+		srcimp->idx[i] = idx;
+	}
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Can't meet SRCIMP resource request!\n");
+		goto error1;
+	}
+
+	err = srcimp_rsc_init(srcimp, desc, mgr);
+	if (err)
+		goto error1;
+
+	*rsrcimp = srcimp;
+
+	return 0;
+
+error1:
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i--; i >= 0; i--)
+		mgr_put_resource(&mgr->mgr, 1, srcimp->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	kfree(srcimp);
+	return err;
+}
+
+static int put_srcimp_rsc(struct srcimp_mgr *mgr, struct srcimp *srcimp)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < srcimp->rsc.msr; i++)
+		mgr_put_resource(&mgr->mgr, 1, srcimp->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	srcimp_rsc_uninit(srcimp);
+	kfree(srcimp);
+
+	return 0;
+}
+
+static int srcimp_map_op(void *data, struct imapper *entry)
+{
+	struct rsc_mgr *mgr = &((struct srcimp_mgr *)data)->mgr;
+	struct hw *hw = mgr->hw;
+
+	hw->srcimp_mgr_set_imaparc(mgr->ctrl_blk, entry->slot);
+	hw->srcimp_mgr_set_imapuser(mgr->ctrl_blk, entry->user);
+	hw->srcimp_mgr_set_imapnxt(mgr->ctrl_blk, entry->next);
+	hw->srcimp_mgr_set_imapaddr(mgr->ctrl_blk, entry->addr);
+	hw->srcimp_mgr_commit_write(mgr->hw, mgr->ctrl_blk);
+
+	return 0;
+}
+
+static int srcimp_imap_add(struct srcimp_mgr *mgr, struct imapper *entry)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&mgr->imap_lock, flags);
+	if ((0 == entry->addr) && (mgr->init_imap_added)) {
+		input_mapper_delete(&mgr->imappers,
+				    mgr->init_imap, srcimp_map_op, mgr);
+		mgr->init_imap_added = 0;
+	}
+	err = input_mapper_add(&mgr->imappers, entry, srcimp_map_op, mgr);
+	spin_unlock_irqrestore(&mgr->imap_lock, flags);
+
+	return err;
+}
+
+static int srcimp_imap_delete(struct srcimp_mgr *mgr, struct imapper *entry)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&mgr->imap_lock, flags);
+	err = input_mapper_delete(&mgr->imappers, entry, srcimp_map_op, mgr);
+	if (list_empty(&mgr->imappers)) {
+		input_mapper_add(&mgr->imappers, mgr->init_imap,
+				 srcimp_map_op, mgr);
+		mgr->init_imap_added = 1;
+	}
+	spin_unlock_irqrestore(&mgr->imap_lock, flags);
+
+	return err;
+}
+
+int srcimp_mgr_create(void *hw, struct srcimp_mgr **rsrcimp_mgr)
+{
+	int err;
+	struct srcimp_mgr *srcimp_mgr;
+	struct imapper *entry;
+
+	*rsrcimp_mgr = NULL;
+	srcimp_mgr = kzalloc(sizeof(*srcimp_mgr), GFP_KERNEL);
+	if (NULL == srcimp_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&srcimp_mgr->mgr, SRCIMP, SRCIMP_RESOURCE_NUM, hw);
+	if (err)
+		goto error1;
+
+	spin_lock_init(&srcimp_mgr->mgr_lock);
+	spin_lock_init(&srcimp_mgr->imap_lock);
+	INIT_LIST_HEAD(&srcimp_mgr->imappers);
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (NULL == entry) {
+		err = -ENOMEM;
+		goto error2;
+	}
+	entry->slot = entry->addr = entry->next = entry->user = 0;
+	list_add(&entry->list, &srcimp_mgr->imappers);
+	srcimp_mgr->init_imap = entry;
+	srcimp_mgr->init_imap_added = 1;
+
+	srcimp_mgr->get_srcimp = get_srcimp_rsc;
+	srcimp_mgr->put_srcimp = put_srcimp_rsc;
+	srcimp_mgr->imap_add = srcimp_imap_add;
+	srcimp_mgr->imap_delete = srcimp_imap_delete;
+
+	*rsrcimp_mgr = srcimp_mgr;
+
+	return 0;
+
+error2:
+	rsc_mgr_uninit(&srcimp_mgr->mgr);
+error1:
+	kfree(srcimp_mgr);
+	return err;
+}
+
+int srcimp_mgr_destroy(struct srcimp_mgr *srcimp_mgr)
+{
+	unsigned long flags;
+
+	/* free src input mapper list */
+	spin_lock_irqsave(&srcimp_mgr->imap_lock, flags);
+	free_input_mapper_list(&srcimp_mgr->imappers);
+	spin_unlock_irqrestore(&srcimp_mgr->imap_lock, flags);
+
+	rsc_mgr_uninit(&srcimp_mgr->mgr);
+	kfree(srcimp_mgr);
+
+	return 0;
+}
diff --git a/sound/pci/ctxfi/ctsrc.h b/sound/pci/ctxfi/ctsrc.h
new file mode 100644
index 0000000..259366a
--- /dev/null
+++ b/sound/pci/ctxfi/ctsrc.h
@@ -0,0 +1,149 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctsrc.h
+ *
+ * @Brief
+ * This file contains the definition of the Sample Rate Convertor
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTSRC_H
+#define CTSRC_H
+
+#include "ctresource.h"
+#include "ctimap.h"
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#define SRC_STATE_OFF	0x0
+#define SRC_STATE_INIT	0x4
+#define SRC_STATE_RUN	0x5
+
+#define SRC_SF_U8	0x0
+#define SRC_SF_S16	0x1
+#define SRC_SF_S24	0x2
+#define SRC_SF_S32	0x3
+#define SRC_SF_F32	0x4
+
+/* Define the descriptor of a src resource */
+enum SRCMODE {
+	MEMRD,		/* Read data from host memory */
+	MEMWR,		/* Write data to host memory */
+	ARCRW,		/* Read from and write to audio ring channel */
+	NUM_SRCMODES
+};
+
+struct src_rsc_ops;
+
+struct src {
+	struct rsc rsc; /* Basic resource info */
+	struct src *intlv; /* Pointer to next interleaved SRC in a series */
+	struct src_rsc_ops *ops; /* SRC specific operations */
+	/* Number of contiguous srcs for interleaved usage */
+	unsigned char multi;
+	unsigned char mode; /* Working mode of this SRC resource */
+};
+
+struct src_rsc_ops {
+	int (*set_state)(struct src *src, unsigned int state);
+	int (*set_bm)(struct src *src, unsigned int bm);
+	int (*set_sf)(struct src *src, unsigned int sf);
+	int (*set_pm)(struct src *src, unsigned int pm);
+	int (*set_rom)(struct src *src, unsigned int rom);
+	int (*set_vo)(struct src *src, unsigned int vo);
+	int (*set_st)(struct src *src, unsigned int st);
+	int (*set_bp)(struct src *src, unsigned int bp);
+	int (*set_cisz)(struct src *src, unsigned int cisz);
+	int (*set_ca)(struct src *src, unsigned int ca);
+	int (*set_sa)(struct src *src, unsigned int sa);
+	int (*set_la)(struct src *src, unsigned int la);
+	int (*set_pitch)(struct src *src, unsigned int pitch);
+	int (*set_clr_zbufs)(struct src *src);
+	int (*commit_write)(struct src *src);
+	int (*get_ca)(struct src *src);
+	int (*init)(struct src *src);
+	struct src* (*next_interleave)(struct src *src);
+};
+
+/* Define src resource request description info */
+struct src_desc {
+	/* Number of contiguous master srcs for interleaved usage */
+	unsigned char multi;
+	unsigned char msr;
+	unsigned char mode; /* Working mode of the requested srcs */
+};
+
+/* Define src manager object */
+struct src_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+
+	 /* request src resource */
+	int (*get_src)(struct src_mgr *mgr,
+		       const struct src_desc *desc, struct src **rsrc);
+	/* return src resource */
+	int (*put_src)(struct src_mgr *mgr, struct src *src);
+	int (*src_enable_s)(struct src_mgr *mgr, struct src *src);
+	int (*src_enable)(struct src_mgr *mgr, struct src *src);
+	int (*src_disable)(struct src_mgr *mgr, struct src *src);
+	int (*commit_write)(struct src_mgr *mgr);
+};
+
+/* Define the descriptor of a SRC Input Mapper resource */
+struct srcimp_mgr;
+struct srcimp_rsc_ops;
+
+struct srcimp {
+	struct rsc rsc;
+	unsigned char idx[8];
+	struct imapper *imappers;
+	unsigned int mapped; /* A bit-map indicating which conj rsc is mapped */
+	struct srcimp_mgr *mgr;
+	struct srcimp_rsc_ops *ops;
+};
+
+struct srcimp_rsc_ops {
+	int (*map)(struct srcimp *srcimp, struct src *user, struct rsc *input);
+	int (*unmap)(struct srcimp *srcimp);
+};
+
+/* Define SRCIMP resource request description info */
+struct srcimp_desc {
+	unsigned int msr;
+};
+
+struct srcimp_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+	spinlock_t imap_lock;
+	struct list_head imappers;
+	struct imapper *init_imap;
+	unsigned int init_imap_added;
+
+	 /* request srcimp resource */
+	int (*get_srcimp)(struct srcimp_mgr *mgr,
+			  const struct srcimp_desc *desc,
+			  struct srcimp **rsrcimp);
+	/* return srcimp resource */
+	int (*put_srcimp)(struct srcimp_mgr *mgr, struct srcimp *srcimp);
+	int (*imap_add)(struct srcimp_mgr *mgr, struct imapper *entry);
+	int (*imap_delete)(struct srcimp_mgr *mgr, struct imapper *entry);
+};
+
+/* Constructor and destructor of SRC resource manager */
+int src_mgr_create(void *hw, struct src_mgr **rsrc_mgr);
+int src_mgr_destroy(struct src_mgr *src_mgr);
+/* Constructor and destructor of SRCIMP resource manager */
+int srcimp_mgr_create(void *hw, struct srcimp_mgr **rsrc_mgr);
+int srcimp_mgr_destroy(struct srcimp_mgr *srcimp_mgr);
+
+#endif /* CTSRC_H */
diff --git a/sound/pci/ctxfi/cttimer.c b/sound/pci/ctxfi/cttimer.c
new file mode 100644
index 0000000..779c6c3
--- /dev/null
+++ b/sound/pci/ctxfi/cttimer.c
@@ -0,0 +1,441 @@
+/*
+ * PCM timer handling on ctxfi
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ */
+
+#include <linux/slab.h>
+#include <linux/math64.h>
+#include <linux/moduleparam.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include "ctatc.h"
+#include "cthardware.h"
+#include "cttimer.h"
+
+static int use_system_timer;
+MODULE_PARM_DESC(use_system_timer, "Foce to use system-timer");
+module_param(use_system_timer, bool, S_IRUGO);
+
+struct ct_timer_ops {
+	void (*init)(struct ct_timer_instance *);
+	void (*prepare)(struct ct_timer_instance *);
+	void (*start)(struct ct_timer_instance *);
+	void (*stop)(struct ct_timer_instance *);
+	void (*free_instance)(struct ct_timer_instance *);
+	void (*interrupt)(struct ct_timer *);
+	void (*free_global)(struct ct_timer *);
+};
+
+/* timer instance -- assigned to each PCM stream */
+struct ct_timer_instance {
+	spinlock_t lock;
+	struct ct_timer *timer_base;
+	struct ct_atc_pcm *apcm;
+	struct snd_pcm_substream *substream;
+	struct timer_list timer;
+	struct list_head instance_list;
+	struct list_head running_list;
+	unsigned int position;
+	unsigned int frag_count;
+	unsigned int running:1;
+	unsigned int need_update:1;
+};
+
+/* timer instance manager */
+struct ct_timer {
+	spinlock_t lock;		/* global timer lock (for xfitimer) */
+	spinlock_t list_lock;		/* lock for instance list */
+	struct ct_atc *atc;
+	struct ct_timer_ops *ops;
+	struct list_head instance_head;
+	struct list_head running_head;
+	unsigned int wc;		/* current wallclock */
+	unsigned int irq_handling:1;	/* in IRQ handling */
+	unsigned int reprogram:1;	/* need to reprogram the internval */
+	unsigned int running:1;		/* global timer running */
+};
+
+
+/*
+ * system-timer-based updates
+ */
+
+static void ct_systimer_callback(unsigned long data)
+{
+	struct ct_timer_instance *ti = (struct ct_timer_instance *)data;
+	struct snd_pcm_substream *substream = ti->substream;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = ti->apcm;
+	unsigned int period_size = runtime->period_size;
+	unsigned int buffer_size = runtime->buffer_size;
+	unsigned long flags;
+	unsigned int position, dist, interval;
+
+	position = substream->ops->pointer(substream);
+	dist = (position + buffer_size - ti->position) % buffer_size;
+	if (dist >= period_size ||
+	    position / period_size != ti->position / period_size) {
+		apcm->interrupt(apcm);
+		ti->position = position;
+	}
+	/* Add extra HZ*5/1000 to avoid overrun issue when recording
+	 * at 8kHz in 8-bit format or at 88kHz in 24-bit format. */
+	interval = ((period_size - (position % period_size))
+		   * HZ + (runtime->rate - 1)) / runtime->rate + HZ * 5 / 1000;
+	spin_lock_irqsave(&ti->lock, flags);
+	if (ti->running)
+		mod_timer(&ti->timer, jiffies + interval);
+	spin_unlock_irqrestore(&ti->lock, flags);
+}
+
+static void ct_systimer_init(struct ct_timer_instance *ti)
+{
+	setup_timer(&ti->timer, ct_systimer_callback,
+		    (unsigned long)ti);
+}
+
+static void ct_systimer_start(struct ct_timer_instance *ti)
+{
+	struct snd_pcm_runtime *runtime = ti->substream->runtime;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ti->lock, flags);
+	ti->running = 1;
+	mod_timer(&ti->timer,
+		  jiffies + (runtime->period_size * HZ +
+			     (runtime->rate - 1)) / runtime->rate);
+	spin_unlock_irqrestore(&ti->lock, flags);
+}
+
+static void ct_systimer_stop(struct ct_timer_instance *ti)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ti->lock, flags);
+	ti->running = 0;
+	del_timer(&ti->timer);
+	spin_unlock_irqrestore(&ti->lock, flags);
+}
+
+static void ct_systimer_prepare(struct ct_timer_instance *ti)
+{
+	ct_systimer_stop(ti);
+	try_to_del_timer_sync(&ti->timer);
+}
+
+#define ct_systimer_free	ct_systimer_prepare
+
+static struct ct_timer_ops ct_systimer_ops = {
+	.init = ct_systimer_init,
+	.free_instance = ct_systimer_free,
+	.prepare = ct_systimer_prepare,
+	.start = ct_systimer_start,
+	.stop = ct_systimer_stop,
+};
+
+
+/*
+ * Handling multiple streams using a global emu20k1 timer irq
+ */
+
+#define CT_TIMER_FREQ	48000
+#define MIN_TICKS	1
+#define MAX_TICKS	((1 << 13) - 1)
+
+static void ct_xfitimer_irq_rearm(struct ct_timer *atimer, int ticks)
+{
+	struct hw *hw = atimer->atc->hw;
+	if (ticks > MAX_TICKS)
+		ticks = MAX_TICKS;
+	hw->set_timer_tick(hw, ticks);
+	if (!atimer->running)
+		hw->set_timer_irq(hw, 1);
+	atimer->running = 1;
+}
+
+static void ct_xfitimer_irq_stop(struct ct_timer *atimer)
+{
+	if (atimer->running) {
+		struct hw *hw = atimer->atc->hw;
+		hw->set_timer_irq(hw, 0);
+		hw->set_timer_tick(hw, 0);
+		atimer->running = 0;
+	}
+}
+
+static inline unsigned int ct_xfitimer_get_wc(struct ct_timer *atimer)
+{
+	struct hw *hw = atimer->atc->hw;
+	return hw->get_wc(hw);
+}
+
+/*
+ * reprogram the timer interval;
+ * checks the running instance list and determines the next timer interval.
+ * also updates the each stream position, returns the number of streams
+ * to call snd_pcm_period_elapsed() appropriately
+ *
+ * call this inside the lock and irq disabled
+ */
+static int ct_xfitimer_reprogram(struct ct_timer *atimer)
+{
+	struct ct_timer_instance *ti;
+	unsigned int min_intr = (unsigned int)-1;
+	int updates = 0;
+	unsigned int wc, diff;
+
+	if (list_empty(&atimer->running_head)) {
+		ct_xfitimer_irq_stop(atimer);
+		atimer->reprogram = 0; /* clear flag */
+		return 0;
+	}
+
+	wc = ct_xfitimer_get_wc(atimer);
+	diff = wc - atimer->wc;
+	atimer->wc = wc;
+	list_for_each_entry(ti, &atimer->running_head, running_list) {
+		if (ti->frag_count > diff)
+			ti->frag_count -= diff;
+		else {
+			unsigned int pos;
+			unsigned int period_size, rate;
+
+			period_size = ti->substream->runtime->period_size;
+			rate = ti->substream->runtime->rate;
+			pos = ti->substream->ops->pointer(ti->substream);
+			if (pos / period_size != ti->position / period_size) {
+				ti->need_update = 1;
+				ti->position = pos;
+				updates++;
+			}
+			pos %= period_size;
+			pos = period_size - pos;
+			ti->frag_count = div_u64((u64)pos * CT_TIMER_FREQ +
+						 rate - 1, rate);
+		}
+		if (ti->frag_count < min_intr)
+			min_intr = ti->frag_count;
+	}
+
+	if (min_intr < MIN_TICKS)
+		min_intr = MIN_TICKS;
+	ct_xfitimer_irq_rearm(atimer, min_intr);
+	atimer->reprogram = 0; /* clear flag */
+	return updates;
+}
+
+/* look through the instance list and call period_elapsed if needed */
+static void ct_xfitimer_check_period(struct ct_timer *atimer)
+{
+	struct ct_timer_instance *ti;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->list_lock, flags);
+	list_for_each_entry(ti, &atimer->instance_head, instance_list) {
+		if (ti->need_update) {
+			ti->need_update = 0;
+			ti->apcm->interrupt(ti->apcm);
+		}
+	}
+	spin_unlock_irqrestore(&atimer->list_lock, flags);
+}
+
+/* Handle timer-interrupt */
+static void ct_xfitimer_callback(struct ct_timer *atimer)
+{
+	int update;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->lock, flags);
+	atimer->irq_handling = 1;
+	do {
+		update = ct_xfitimer_reprogram(atimer);
+		spin_unlock(&atimer->lock);
+		if (update)
+			ct_xfitimer_check_period(atimer);
+		spin_lock(&atimer->lock);
+	} while (atimer->reprogram);
+	atimer->irq_handling = 0;
+	spin_unlock_irqrestore(&atimer->lock, flags);
+}
+
+static void ct_xfitimer_prepare(struct ct_timer_instance *ti)
+{
+	ti->frag_count = ti->substream->runtime->period_size;
+	ti->need_update = 0;
+}
+
+
+/* start/stop the timer */
+static void ct_xfitimer_update(struct ct_timer *atimer)
+{
+	unsigned long flags;
+	int update;
+
+	spin_lock_irqsave(&atimer->lock, flags);
+	if (atimer->irq_handling) {
+		/* reached from IRQ handler; let it handle later */
+		atimer->reprogram = 1;
+		spin_unlock_irqrestore(&atimer->lock, flags);
+		return;
+	}
+
+	ct_xfitimer_irq_stop(atimer);
+	update = ct_xfitimer_reprogram(atimer);
+	spin_unlock_irqrestore(&atimer->lock, flags);
+	if (update)
+		ct_xfitimer_check_period(atimer);
+}
+
+static void ct_xfitimer_start(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->lock, flags);
+	if (list_empty(&ti->running_list))
+		atimer->wc = ct_xfitimer_get_wc(atimer);
+	list_add(&ti->running_list, &atimer->running_head);
+	spin_unlock_irqrestore(&atimer->lock, flags);
+	ct_xfitimer_update(atimer);
+}
+
+static void ct_xfitimer_stop(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->lock, flags);
+	list_del_init(&ti->running_list);
+	ti->need_update = 0;
+	spin_unlock_irqrestore(&atimer->lock, flags);
+	ct_xfitimer_update(atimer);
+}
+
+static void ct_xfitimer_free_global(struct ct_timer *atimer)
+{
+	ct_xfitimer_irq_stop(atimer);
+}
+
+static struct ct_timer_ops ct_xfitimer_ops = {
+	.prepare = ct_xfitimer_prepare,
+	.start = ct_xfitimer_start,
+	.stop = ct_xfitimer_stop,
+	.interrupt = ct_xfitimer_callback,
+	.free_global = ct_xfitimer_free_global,
+};
+
+/*
+ * timer instance
+ */
+
+struct ct_timer_instance *
+ct_timer_instance_new(struct ct_timer *atimer, struct ct_atc_pcm *apcm)
+{
+	struct ct_timer_instance *ti;
+
+	ti = kzalloc(sizeof(*ti), GFP_KERNEL);
+	if (!ti)
+		return NULL;
+	spin_lock_init(&ti->lock);
+	INIT_LIST_HEAD(&ti->instance_list);
+	INIT_LIST_HEAD(&ti->running_list);
+	ti->timer_base = atimer;
+	ti->apcm = apcm;
+	ti->substream = apcm->substream;
+	if (atimer->ops->init)
+		atimer->ops->init(ti);
+
+	spin_lock_irq(&atimer->list_lock);
+	list_add(&ti->instance_list, &atimer->instance_head);
+	spin_unlock_irq(&atimer->list_lock);
+
+	return ti;
+}
+
+void ct_timer_prepare(struct ct_timer_instance *ti)
+{
+	if (ti->timer_base->ops->prepare)
+		ti->timer_base->ops->prepare(ti);
+	ti->position = 0;
+	ti->running = 0;
+}
+
+void ct_timer_start(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+	atimer->ops->start(ti);
+}
+
+void ct_timer_stop(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+	atimer->ops->stop(ti);
+}
+
+void ct_timer_instance_free(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+
+	atimer->ops->stop(ti); /* to be sure */
+	if (atimer->ops->free_instance)
+		atimer->ops->free_instance(ti);
+
+	spin_lock_irq(&atimer->list_lock);
+	list_del(&ti->instance_list);
+	spin_unlock_irq(&atimer->list_lock);
+
+	kfree(ti);
+}
+
+/*
+ * timer manager
+ */
+
+static void ct_timer_interrupt(void *data, unsigned int status)
+{
+	struct ct_timer *timer = data;
+
+	/* Interval timer interrupt */
+	if ((status & IT_INT) && timer->ops->interrupt)
+		timer->ops->interrupt(timer);
+}
+
+struct ct_timer *ct_timer_new(struct ct_atc *atc)
+{
+	struct ct_timer *atimer;
+	struct hw *hw;
+
+	atimer = kzalloc(sizeof(*atimer), GFP_KERNEL);
+	if (!atimer)
+		return NULL;
+	spin_lock_init(&atimer->lock);
+	spin_lock_init(&atimer->list_lock);
+	INIT_LIST_HEAD(&atimer->instance_head);
+	INIT_LIST_HEAD(&atimer->running_head);
+	atimer->atc = atc;
+	hw = atc->hw;
+	if (!use_system_timer && hw->set_timer_irq) {
+		snd_printd(KERN_INFO "ctxfi: Use xfi-native timer\n");
+		atimer->ops = &ct_xfitimer_ops;
+		hw->irq_callback_data = atimer;
+		hw->irq_callback = ct_timer_interrupt;
+	} else {
+		snd_printd(KERN_INFO "ctxfi: Use system timer\n");
+		atimer->ops = &ct_systimer_ops;
+	}
+	return atimer;
+}
+
+void ct_timer_free(struct ct_timer *atimer)
+{
+	struct hw *hw = atimer->atc->hw;
+	hw->irq_callback = NULL;
+	if (atimer->ops->free_global)
+		atimer->ops->free_global(atimer);
+	kfree(atimer);
+}
+
diff --git a/sound/pci/ctxfi/cttimer.h b/sound/pci/ctxfi/cttimer.h
new file mode 100644
index 0000000..9793482
--- /dev/null
+++ b/sound/pci/ctxfi/cttimer.h
@@ -0,0 +1,29 @@
+/*
+ * Timer handling
+ */
+
+#ifndef __CTTIMER_H
+#define __CTTIMER_H
+
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+
+struct snd_pcm_substream;
+struct ct_atc;
+struct ct_atc_pcm;
+
+struct ct_timer;
+struct ct_timer_instance;
+
+struct ct_timer *ct_timer_new(struct ct_atc *atc);
+void ct_timer_free(struct ct_timer *atimer);
+
+struct ct_timer_instance *
+ct_timer_instance_new(struct ct_timer *atimer, struct ct_atc_pcm *apcm);
+void ct_timer_instance_free(struct ct_timer_instance *ti);
+void ct_timer_start(struct ct_timer_instance *ti);
+void ct_timer_stop(struct ct_timer_instance *ti);
+void ct_timer_prepare(struct ct_timer_instance *ti);
+
+#endif /* __CTTIMER_H */
diff --git a/sound/pci/ctxfi/ctvmem.c b/sound/pci/ctxfi/ctvmem.c
new file mode 100644
index 0000000..67665a7
--- /dev/null
+++ b/sound/pci/ctxfi/ctvmem.c
@@ -0,0 +1,250 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File    ctvmem.c
+ *
+ * @Brief
+ * This file contains the implementation of virtual memory management object
+ * for card device.
+ *
+ * @Author Liu Chun
+ * @Date Apr 1 2008
+ */
+
+#include "ctvmem.h"
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <sound/pcm.h>
+
+#define CT_PTES_PER_PAGE (CT_PAGE_SIZE / sizeof(void *))
+#define CT_ADDRS_PER_PAGE (CT_PTES_PER_PAGE * CT_PAGE_SIZE)
+
+/* *
+ * Find or create vm block based on requested @size.
+ * @size must be page aligned.
+ * */
+static struct ct_vm_block *
+get_vm_block(struct ct_vm *vm, unsigned int size)
+{
+	struct ct_vm_block *block = NULL, *entry;
+	struct list_head *pos;
+
+	size = CT_PAGE_ALIGN(size);
+	if (size > vm->size) {
+		printk(KERN_ERR "ctxfi: Fail! No sufficient device virtural "
+				  "memory space available!\n");
+		return NULL;
+	}
+
+	mutex_lock(&vm->lock);
+	list_for_each(pos, &vm->unused) {
+		entry = list_entry(pos, struct ct_vm_block, list);
+		if (entry->size >= size)
+			break; /* found a block that is big enough */
+	}
+	if (pos == &vm->unused)
+		goto out;
+
+	if (entry->size == size) {
+		/* Move the vm node from unused list to used list directly */
+		list_del(&entry->list);
+		list_add(&entry->list, &vm->used);
+		vm->size -= size;
+		block = entry;
+		goto out;
+	}
+
+	block = kzalloc(sizeof(*block), GFP_KERNEL);
+	if (NULL == block)
+		goto out;
+
+	block->addr = entry->addr;
+	block->size = size;
+	list_add(&block->list, &vm->used);
+	entry->addr += size;
+	entry->size -= size;
+	vm->size -= size;
+
+ out:
+	mutex_unlock(&vm->lock);
+	return block;
+}
+
+static void put_vm_block(struct ct_vm *vm, struct ct_vm_block *block)
+{
+	struct ct_vm_block *entry, *pre_ent;
+	struct list_head *pos, *pre;
+
+	block->size = CT_PAGE_ALIGN(block->size);
+
+	mutex_lock(&vm->lock);
+	list_del(&block->list);
+	vm->size += block->size;
+
+	list_for_each(pos, &vm->unused) {
+		entry = list_entry(pos, struct ct_vm_block, list);
+		if (entry->addr >= (block->addr + block->size))
+			break; /* found a position */
+	}
+	if (pos == &vm->unused) {
+		list_add_tail(&block->list, &vm->unused);
+		entry = block;
+	} else {
+		if ((block->addr + block->size) == entry->addr) {
+			entry->addr = block->addr;
+			entry->size += block->size;
+			kfree(block);
+		} else {
+			__list_add(&block->list, pos->prev, pos);
+			entry = block;
+		}
+	}
+
+	pos = &entry->list;
+	pre = pos->prev;
+	while (pre != &vm->unused) {
+		entry = list_entry(pos, struct ct_vm_block, list);
+		pre_ent = list_entry(pre, struct ct_vm_block, list);
+		if ((pre_ent->addr + pre_ent->size) > entry->addr)
+			break;
+
+		pre_ent->size += entry->size;
+		list_del(pos);
+		kfree(entry);
+		pos = pre;
+		pre = pos->prev;
+	}
+	mutex_unlock(&vm->lock);
+}
+
+/* Map host addr (kmalloced/vmalloced) to device logical addr. */
+static struct ct_vm_block *
+ct_vm_map(struct ct_vm *vm, struct snd_pcm_substream *substream, int size)
+{
+	struct ct_vm_block *block;
+	unsigned int pte_start;
+	unsigned i, pages;
+	unsigned long *ptp;
+
+	block = get_vm_block(vm, size);
+	if (block == NULL) {
+		printk(KERN_ERR "ctxfi: No virtual memory block that is big "
+				  "enough to allocate!\n");
+		return NULL;
+	}
+
+	ptp = vm->ptp[0];
+	pte_start = (block->addr >> CT_PAGE_SHIFT);
+	pages = block->size >> CT_PAGE_SHIFT;
+	for (i = 0; i < pages; i++) {
+		unsigned long addr;
+		addr = snd_pcm_sgbuf_get_addr(substream, i << CT_PAGE_SHIFT);
+		ptp[pte_start + i] = addr;
+	}
+
+	block->size = size;
+	return block;
+}
+
+static void ct_vm_unmap(struct ct_vm *vm, struct ct_vm_block *block)
+{
+	/* do unmapping */
+	put_vm_block(vm, block);
+}
+
+/* *
+ * return the host (kmalloced) addr of the @index-th device
+ * page talbe page on success, or NULL on failure.
+ * The first returned NULL indicates the termination.
+ * */
+static void *
+ct_get_ptp_virt(struct ct_vm *vm, int index)
+{
+	void *addr;
+
+	addr = (index >= CT_PTP_NUM) ? NULL : vm->ptp[index];
+
+	return addr;
+}
+
+int ct_vm_create(struct ct_vm **rvm)
+{
+	struct ct_vm *vm;
+	struct ct_vm_block *block;
+	int i;
+
+	*rvm = NULL;
+
+	vm = kzalloc(sizeof(*vm), GFP_KERNEL);
+	if (NULL == vm)
+		return -ENOMEM;
+
+	mutex_init(&vm->lock);
+
+	/* Allocate page table pages */
+	for (i = 0; i < CT_PTP_NUM; i++) {
+		vm->ptp[i] = kmalloc(PAGE_SIZE, GFP_KERNEL);
+		if (NULL == vm->ptp[i])
+			break;
+	}
+	if (!i) {
+		/* no page table pages are allocated */
+		kfree(vm);
+		return -ENOMEM;
+	}
+	vm->size = CT_ADDRS_PER_PAGE * i;
+	/* Initialise remaining ptps */
+	for (; i < CT_PTP_NUM; i++)
+		vm->ptp[i] = NULL;
+
+	vm->map = ct_vm_map;
+	vm->unmap = ct_vm_unmap;
+	vm->get_ptp_virt = ct_get_ptp_virt;
+	INIT_LIST_HEAD(&vm->unused);
+	INIT_LIST_HEAD(&vm->used);
+	block = kzalloc(sizeof(*block), GFP_KERNEL);
+	if (NULL != block) {
+		block->addr = 0;
+		block->size = vm->size;
+		list_add(&block->list, &vm->unused);
+	}
+
+	*rvm = vm;
+	return 0;
+}
+
+/* The caller must ensure no mapping pages are being used
+ * by hardware before calling this function */
+void ct_vm_destroy(struct ct_vm *vm)
+{
+	int i;
+	struct list_head *pos;
+	struct ct_vm_block *entry;
+
+	/* free used and unused list nodes */
+	while (!list_empty(&vm->used)) {
+		pos = vm->used.next;
+		list_del(pos);
+		entry = list_entry(pos, struct ct_vm_block, list);
+		kfree(entry);
+	}
+	while (!list_empty(&vm->unused)) {
+		pos = vm->unused.next;
+		list_del(pos);
+		entry = list_entry(pos, struct ct_vm_block, list);
+		kfree(entry);
+	}
+
+	/* free allocated page table pages */
+	for (i = 0; i < CT_PTP_NUM; i++)
+		kfree(vm->ptp[i]);
+
+	vm->size = 0;
+
+	kfree(vm);
+}
diff --git a/sound/pci/ctxfi/ctvmem.h b/sound/pci/ctxfi/ctvmem.h
new file mode 100644
index 0000000..01e4fd0
--- /dev/null
+++ b/sound/pci/ctxfi/ctvmem.h
@@ -0,0 +1,61 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File    ctvmem.h
+ *
+ * @Brief
+ * This file contains the definition of virtual memory management object
+ * for card device.
+ *
+ * @Author Liu Chun
+ * @Date Mar 28 2008
+ */
+
+#ifndef CTVMEM_H
+#define CTVMEM_H
+
+#define CT_PTP_NUM	1	/* num of device page table pages */
+
+#include <linux/mutex.h>
+#include <linux/list.h>
+
+/* The chip can handle the page table of 4k pages
+ * (emu20k1 can handle even 8k pages, but we don't use it right now)
+ */
+#define CT_PAGE_SIZE	4096
+#define CT_PAGE_SHIFT	12
+#define CT_PAGE_MASK	(~(PAGE_SIZE - 1))
+#define CT_PAGE_ALIGN(addr)	ALIGN(addr, CT_PAGE_SIZE)
+
+struct ct_vm_block {
+	unsigned int addr;	/* starting logical addr of this block */
+	unsigned int size;	/* size of this device virtual mem block */
+	struct list_head list;
+};
+
+struct snd_pcm_substream;
+
+/* Virtual memory management object for card device */
+struct ct_vm {
+	void *ptp[CT_PTP_NUM];		/* Device page table pages */
+	unsigned int size;		/* Available addr space in bytes */
+	struct list_head unused;	/* List of unused blocks */
+	struct list_head used;		/* List of used blocks */
+	struct mutex lock;
+
+	/* Map host addr (kmalloced/vmalloced) to device logical addr. */
+	struct ct_vm_block *(*map)(struct ct_vm *, struct snd_pcm_substream *,
+				   int size);
+	/* Unmap device logical addr area. */
+	void (*unmap)(struct ct_vm *, struct ct_vm_block *block);
+	void *(*get_ptp_virt)(struct ct_vm *vm, int index);
+};
+
+int ct_vm_create(struct ct_vm **rvm);
+void ct_vm_destroy(struct ct_vm *vm);
+
+#endif /* CTVMEM_H */
diff --git a/sound/pci/ctxfi/xfi.c b/sound/pci/ctxfi/xfi.c
new file mode 100644
index 0000000..2d3dd89
--- /dev/null
+++ b/sound/pci/ctxfi/xfi.c
@@ -0,0 +1,142 @@
+/*
+ * xfi linux driver.
+ *
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/moduleparam.h>
+#include <linux/pci_ids.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include "ctatc.h"
+#include "cthardware.h"
+
+MODULE_AUTHOR("Creative Technology Ltd");
+MODULE_DESCRIPTION("X-Fi driver version 1.03");
+MODULE_LICENSE("GPL v2");
+MODULE_SUPPORTED_DEVICE("{{Creative Labs, Sound Blaster X-Fi}");
+
+static unsigned int reference_rate = 48000;
+static unsigned int multiple = 2;
+MODULE_PARM_DESC(reference_rate, "Reference rate (default=48000)");
+module_param(reference_rate, uint, S_IRUGO);
+MODULE_PARM_DESC(multiple, "Rate multiplier (default=2)");
+module_param(multiple, uint, S_IRUGO);
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for Creative X-Fi driver");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for Creative X-Fi driver");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable Creative X-Fi driver");
+
+static struct pci_device_id ct_pci_dev_ids[] = {
+	/* only X-Fi is supported, so... */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K1),
+	  .driver_data = ATC20K1,
+	},
+	{ PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K2),
+	  .driver_data = ATC20K2,
+	},
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, ct_pci_dev_ids);
+
+static int __devinit
+ct_card_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
+{
+	static int dev;
+	struct snd_card *card;
+	struct ct_atc *atc;
+	int err;
+
+	if (dev >= SNDRV_CARDS)
+		return -ENODEV;
+
+	if (!enable[dev]) {
+		dev++;
+		return -ENOENT;
+	}
+	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+	if (err)
+		return err;
+	if ((reference_rate != 48000) && (reference_rate != 44100)) {
+		printk(KERN_ERR "ctxfi: Invalid reference_rate value %u!!!\n",
+		       reference_rate);
+		printk(KERN_ERR "ctxfi: The valid values for reference_rate "
+		       "are 48000 and 44100, Value 48000 is assumed.\n");
+		reference_rate = 48000;
+	}
+	if ((multiple != 1) && (multiple != 2)) {
+		printk(KERN_ERR "ctxfi: Invalid multiple value %u!!!\n",
+		       multiple);
+		printk(KERN_ERR "ctxfi: The valid values for multiple are "
+		       "1 and 2, Value 2 is assumed.\n");
+		multiple = 2;
+	}
+	err = ct_atc_create(card, pci, reference_rate, multiple,
+			    pci_id->driver_data, &atc);
+	if (err < 0)
+		goto error;
+
+	card->private_data = atc;
+
+	/* Create alsa devices supported by this card */
+	err = ct_atc_create_alsa_devs(atc);
+	if (err < 0)
+		goto error;
+
+	strcpy(card->driver, "SB-XFi");
+	strcpy(card->shortname, "Creative X-Fi");
+	snprintf(card->longname, sizeof(card->longname), "%s %s %s",
+		 card->shortname, atc->chip_name, atc->model_name);
+
+	err = snd_card_register(card);
+	if (err < 0)
+		goto error;
+
+	pci_set_drvdata(pci, card);
+	dev++;
+
+	return 0;
+
+error:
+	snd_card_free(card);
+	return err;
+}
+
+static void __devexit ct_card_remove(struct pci_dev *pci)
+{
+	snd_card_free(pci_get_drvdata(pci));
+	pci_set_drvdata(pci, NULL);
+}
+
+static struct pci_driver ct_driver = {
+	.name = "SB-XFi",
+	.id_table = ct_pci_dev_ids,
+	.probe = ct_card_probe,
+	.remove = __devexit_p(ct_card_remove),
+};
+
+static int __init ct_card_init(void)
+{
+	return pci_register_driver(&ct_driver);
+}
+
+static void __exit ct_card_exit(void)
+{
+	pci_unregister_driver(&ct_driver);
+}
+
+module_init(ct_card_init)
+module_exit(ct_card_exit)
diff --git a/sound/pci/emu10k1/Makefile b/sound/pci/emu10k1/Makefile
index cf2d563..fc5591e 100644
--- a/sound/pci/emu10k1/Makefile
+++ b/sound/pci/emu10k1/Makefile
@@ -9,15 +9,7 @@
 snd-emu10k1-synth-objs := emu10k1_synth.o emu10k1_callback.o emu10k1_patch.o
 snd-emu10k1x-objs := emu10k1x.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_EMU10K1) += snd-emu10k1.o
-obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-emu10k1-synth.o
+obj-$(CONFIG_SND_EMU10K1_SEQ) += snd-emu10k1-synth.o
 obj-$(CONFIG_SND_EMU10K1X) += snd-emu10k1x.o
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 1970f0e..4d3ad79 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -858,7 +858,6 @@
 	}
 
 	pcm->info_flags = 0;
-	pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX;
 	switch(device) {
 	case 0:
 		strcpy(pcm->name, "EMU10K1X Front");
diff --git a/sound/pci/emu10k1/emupcm.c b/sound/pci/emu10k1/emupcm.c
index 78f62fd..55b83ef 100644
--- a/sound/pci/emu10k1/emupcm.c
+++ b/sound/pci/emu10k1/emupcm.c
@@ -1736,7 +1736,7 @@
 	.buffer_bytes_max =	(128*1024),
 	.period_bytes_min =	1024,
 	.period_bytes_max =	(128*1024),
-	.periods_min =		1,
+	.periods_min =		2,
 	.periods_max =		1024,
 	.fifo_size =		0,
 };
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index eb2a19b..c710150 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -139,6 +139,19 @@
 	  snd-hda-codec-conexant.
 	  This module is automatically loaded at probing.
 
+config SND_HDA_CODEC_CA0110
+	bool "Build Creative CA0110-IBG codec support"
+	depends on SND_HDA_INTEL
+	default y
+	help
+	  Say Y here to include Creative CA0110-IBG codec support in
+	  snd-hda-intel driver, found on some Creative X-Fi cards.
+
+	  When the HD-audio driver is built as a module, the codec
+	  support code is also built as another module,
+	  snd-hda-codec-ca0110.
+	  This module is automatically loaded at probing.
+
 config SND_HDA_CODEC_CMEDIA
 	bool "Build C-Media HD-audio codec support"
 	default y
diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
index 50f9d09..e3081d4 100644
--- a/sound/pci/hda/Makefile
+++ b/sound/pci/hda/Makefile
@@ -13,6 +13,7 @@
 snd-hda-codec-idt-objs :=	patch_sigmatel.o
 snd-hda-codec-si3054-objs :=	patch_si3054.o
 snd-hda-codec-atihdmi-objs :=	patch_atihdmi.o
+snd-hda-codec-ca0110-objs :=	patch_ca0110.o
 snd-hda-codec-conexant-objs :=	patch_conexant.o
 snd-hda-codec-via-objs :=	patch_via.o
 snd-hda-codec-nvhdmi-objs :=	patch_nvhdmi.o
@@ -40,6 +41,9 @@
 ifdef CONFIG_SND_HDA_CODEC_ATIHDMI
 obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-atihdmi.o
 endif
+ifdef CONFIG_SND_HDA_CODEC_CA0110
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-ca0110.o
+endif
 ifdef CONFIG_SND_HDA_CODEC_CONEXANT
 obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-conexant.o
 endif
diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c
index 4de5bac..29272f2 100644
--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -45,6 +45,46 @@
 			AC_VERB_SET_BEEP_CONTROL, beep->tone);
 }
 
+/* (non-standard) Linear beep tone calculation for IDT/STAC codecs 
+ *
+ * The tone frequency of beep generator on IDT/STAC codecs is
+ * defined from the 8bit tone parameter, in Hz,
+ *    freq = 48000 * (257 - tone) / 1024
+ * that is from 12kHz to 93.75kHz in step of 46.875 hz
+ */
+static int beep_linear_tone(struct hda_beep *beep, int hz)
+{
+	hz *= 1000; /* fixed point */
+	hz = hz - DIGBEEP_HZ_MIN;
+	if (hz < 0)
+		hz = 0; /* turn off PC beep*/
+	else if (hz >= (DIGBEEP_HZ_MAX - DIGBEEP_HZ_MIN))
+		hz = 0xff;
+	else {
+		hz /= DIGBEEP_HZ_STEP;
+		hz++;
+	}
+	return hz;
+}
+
+/* HD-audio standard beep tone parameter calculation
+ *
+ * The tone frequency in Hz is calculated as
+ *   freq = 48000 / (tone * 4)
+ * from 47Hz to 12kHz
+ */
+static int beep_standard_tone(struct hda_beep *beep, int hz)
+{
+	if (hz <= 0)
+		return 0; /* disabled */
+	hz = 12000 / hz;
+	if (hz > 0xff)
+		return 0xff;
+	if (hz <= 0)
+		return 1;
+	return hz;
+}
+
 static int snd_hda_beep_event(struct input_dev *dev, unsigned int type,
 				unsigned int code, int hz)
 {
@@ -55,21 +95,14 @@
 		if (hz)
 			hz = 1000;
 	case SND_TONE:
-		hz *= 1000; /* fixed point */
-		hz = hz - DIGBEEP_HZ_MIN;
-		if (hz < 0)
-			hz = 0; /* turn off PC beep*/
-		else if (hz >= (DIGBEEP_HZ_MAX - DIGBEEP_HZ_MIN))
-			hz = 0xff;
-		else {
-			hz /= DIGBEEP_HZ_STEP;
-			hz++;
-		}
+		if (beep->linear_tone)
+			beep->tone = beep_linear_tone(beep, hz);
+		else
+			beep->tone = beep_standard_tone(beep, hz);
 		break;
 	default:
 		return -1;
 	}
-	beep->tone = hz;
 
 	/* schedule beep event */
 	schedule_work(&beep->beep_work);
diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h
index 51bf6a5..0c3de78 100644
--- a/sound/pci/hda/hda_beep.h
+++ b/sound/pci/hda/hda_beep.h
@@ -30,8 +30,9 @@
 	struct hda_codec *codec;
 	char phys[32];
 	int tone;
-	int nid;
-	int enabled;
+	hda_nid_t nid;
+	unsigned int enabled:1;
+	unsigned int linear_tone:1;	/* linear tone for IDT/STAC codec */
 	struct work_struct beep_work; /* scheduled task for beep event */
 };
 
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 8820faf..562403a 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -48,6 +48,7 @@
 	{ 0x1095, "Silicon Image" },
 	{ 0x10de, "Nvidia" },
 	{ 0x10ec, "Realtek" },
+	{ 0x1102, "Creative" },
 	{ 0x1106, "VIA" },
 	{ 0x111d, "IDT" },
 	{ 0x11c1, "LSI" },
@@ -157,6 +158,39 @@
 	return val;
 }
 
+/*
+ * Send and receive a verb
+ */
+static int codec_exec_verb(struct hda_codec *codec, unsigned int cmd,
+			   unsigned int *res)
+{
+	struct hda_bus *bus = codec->bus;
+	int err;
+
+	if (res)
+		*res = -1;
+ again:
+	snd_hda_power_up(codec);
+	mutex_lock(&bus->cmd_mutex);
+	err = bus->ops.command(bus, cmd);
+	if (!err && res)
+		*res = bus->ops.get_response(bus);
+	mutex_unlock(&bus->cmd_mutex);
+	snd_hda_power_down(codec);
+	if (res && *res == -1 && bus->rirb_error) {
+		if (bus->response_reset) {
+			snd_printd("hda_codec: resetting BUS due to "
+				   "fatal communication error\n");
+			bus->ops.bus_reset(bus);
+		}
+		goto again;
+	}
+	/* clear reset-flag when the communication gets recovered */
+	if (!err)
+		bus->response_reset = 0;
+	return err;
+}
+
 /**
  * snd_hda_codec_read - send a command and get the response
  * @codec: the HDA codec
@@ -173,18 +207,9 @@
 				int direct,
 				unsigned int verb, unsigned int parm)
 {
-	struct hda_bus *bus = codec->bus;
+	unsigned cmd = make_codec_cmd(codec, nid, direct, verb, parm);
 	unsigned int res;
-
-	res = make_codec_cmd(codec, nid, direct, verb, parm);
-	snd_hda_power_up(codec);
-	mutex_lock(&bus->cmd_mutex);
-	if (!bus->ops.command(bus, res))
-		res = bus->ops.get_response(bus);
-	else
-		res = (unsigned int)-1;
-	mutex_unlock(&bus->cmd_mutex);
-	snd_hda_power_down(codec);
+	codec_exec_verb(codec, cmd, &res);
 	return res;
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_read);
@@ -204,17 +229,10 @@
 int snd_hda_codec_write(struct hda_codec *codec, hda_nid_t nid, int direct,
 			 unsigned int verb, unsigned int parm)
 {
-	struct hda_bus *bus = codec->bus;
+	unsigned int cmd = make_codec_cmd(codec, nid, direct, verb, parm);
 	unsigned int res;
-	int err;
-
-	res = make_codec_cmd(codec, nid, direct, verb, parm);
-	snd_hda_power_up(codec);
-	mutex_lock(&bus->cmd_mutex);
-	err = bus->ops.command(bus, res);
-	mutex_unlock(&bus->cmd_mutex);
-	snd_hda_power_down(codec);
-	return err;
+	return codec_exec_verb(codec, cmd,
+			       codec->bus->sync_write ? &res : NULL);
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_write);
 
@@ -613,7 +631,10 @@
 	const struct hda_vendor_id *c;
 	const char *vendor = NULL;
 	u16 vendor_id = codec->vendor_id >> 16;
-	char tmp[16], name[32];
+	char tmp[16];
+
+	if (codec->vendor_name)
+		goto get_chip_name;
 
 	for (c = hda_vendor_ids; c->id; c++) {
 		if (c->id == vendor_id) {
@@ -625,14 +646,21 @@
 		sprintf(tmp, "Generic %04x", vendor_id);
 		vendor = tmp;
 	}
+	codec->vendor_name = kstrdup(vendor, GFP_KERNEL);
+	if (!codec->vendor_name)
+		return -ENOMEM;
+
+ get_chip_name:
+	if (codec->chip_name)
+		return 0;
+
 	if (codec->preset && codec->preset->name)
-		snprintf(name, sizeof(name), "%s %s", vendor,
-			 codec->preset->name);
-	else
-		snprintf(name, sizeof(name), "%s ID %x", vendor,
-			 codec->vendor_id & 0xffff);
-	codec->name = kstrdup(name, GFP_KERNEL);
-	if (!codec->name)
+		codec->chip_name = kstrdup(codec->preset->name, GFP_KERNEL);
+	else {
+		sprintf(tmp, "ID %x", codec->vendor_id & 0xffff);
+		codec->chip_name = kstrdup(tmp, GFP_KERNEL);
+	}
+	if (!codec->chip_name)
 		return -ENOMEM;
 	return 0;
 }
@@ -838,7 +866,8 @@
 	module_put(codec->owner);
 	free_hda_cache(&codec->amp_cache);
 	free_hda_cache(&codec->cmd_cache);
-	kfree(codec->name);
+	kfree(codec->vendor_name);
+	kfree(codec->chip_name);
 	kfree(codec->modelname);
 	kfree(codec->wcaps);
 	kfree(codec);
@@ -979,15 +1008,16 @@
 	int err;
 
 	codec->preset = find_codec_preset(codec);
-	if (!codec->name) {
+	if (!codec->vendor_name || !codec->chip_name) {
 		err = get_codec_name(codec);
 		if (err < 0)
 			return err;
 	}
 	/* audio codec should override the mixer name */
 	if (codec->afg || !*codec->bus->card->mixername)
-		strlcpy(codec->bus->card->mixername, codec->name,
-			sizeof(codec->bus->card->mixername));
+		snprintf(codec->bus->card->mixername,
+			 sizeof(codec->bus->card->mixername),
+			 "%s %s", codec->vendor_name, codec->chip_name);
 
 	if (is_generic_config(codec)) {
 		err = snd_hda_parse_generic_codec(codec);
@@ -1055,6 +1085,8 @@
 /* FIXME: more better hash key? */
 #define HDA_HASH_KEY(nid,dir,idx) (u32)((nid) + ((idx) << 16) + ((dir) << 24))
 #define HDA_HASH_PINCAP_KEY(nid) (u32)((nid) + (0x02 << 24))
+#define HDA_HASH_PARPCM_KEY(nid) (u32)((nid) + (0x03 << 24))
+#define HDA_HASH_PARSTR_KEY(nid) (u32)((nid) + (0x04 << 24))
 #define INFO_AMP_CAPS	(1<<0)
 #define INFO_AMP_VOL(ch)	(1 << (1 + (ch)))
 
@@ -1145,19 +1177,32 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_override_amp_caps);
 
-u32 snd_hda_query_pin_caps(struct hda_codec *codec, hda_nid_t nid)
+static unsigned int
+query_caps_hash(struct hda_codec *codec, hda_nid_t nid, u32 key,
+		unsigned int (*func)(struct hda_codec *, hda_nid_t))
 {
 	struct hda_amp_info *info;
 
-	info = get_alloc_amp_hash(codec, HDA_HASH_PINCAP_KEY(nid));
+	info = get_alloc_amp_hash(codec, key);
 	if (!info)
 		return 0;
 	if (!info->head.val) {
-		info->amp_caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
 		info->head.val |= INFO_AMP_CAPS;
+		info->amp_caps = func(codec, nid);
 	}
 	return info->amp_caps;
 }
+
+static unsigned int read_pin_cap(struct hda_codec *codec, hda_nid_t nid)
+{
+	return snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
+}
+
+u32 snd_hda_query_pin_caps(struct hda_codec *codec, hda_nid_t nid)
+{
+	return query_caps_hash(codec, nid, HDA_HASH_PINCAP_KEY(nid),
+			       read_pin_cap);
+}
 EXPORT_SYMBOL_HDA(snd_hda_query_pin_caps);
 
 /*
@@ -1432,6 +1477,8 @@
 	memset(&id, 0, sizeof(id));
 	id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
 	id.index = idx;
+	if (snd_BUG_ON(strlen(name) >= sizeof(id.name)))
+		return NULL;
 	strcpy(id.name, name);
 	return snd_ctl_find_id(codec->bus->card, &id);
 }
@@ -2242,28 +2289,22 @@
 int snd_hda_codec_write_cache(struct hda_codec *codec, hda_nid_t nid,
 			      int direct, unsigned int verb, unsigned int parm)
 {
-	struct hda_bus *bus = codec->bus;
-	unsigned int res;
-	int err;
+	int err = snd_hda_codec_write(codec, nid, direct, verb, parm);
+	struct hda_cache_head *c;
+	u32 key;
 
-	res = make_codec_cmd(codec, nid, direct, verb, parm);
-	snd_hda_power_up(codec);
-	mutex_lock(&bus->cmd_mutex);
-	err = bus->ops.command(bus, res);
-	if (!err) {
-		struct hda_cache_head *c;
-		u32 key;
-		/* parm may contain the verb stuff for get/set amp */
-		verb = verb | (parm >> 8);
-		parm &= 0xff;
-		key = build_cmd_cache_key(nid, verb);
-		c = get_alloc_hash(&codec->cmd_cache, key);
-		if (c)
-			c->val = parm;
-	}
-	mutex_unlock(&bus->cmd_mutex);
-	snd_hda_power_down(codec);
-	return err;
+	if (err < 0)
+		return err;
+	/* parm may contain the verb stuff for get/set amp */
+	verb = verb | (parm >> 8);
+	parm &= 0xff;
+	key = build_cmd_cache_key(nid, verb);
+	mutex_lock(&codec->bus->cmd_mutex);
+	c = get_alloc_hash(&codec->cmd_cache, key);
+	if (c)
+		c->val = parm;
+	mutex_unlock(&codec->bus->cmd_mutex);
+	return 0;
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_write_cache);
 
@@ -2321,7 +2362,8 @@
 		if (wcaps & AC_WCAP_POWER) {
 			unsigned int wid_type = (wcaps & AC_WCAP_TYPE) >>
 				AC_WCAP_TYPE_SHIFT;
-			if (wid_type == AC_WID_PIN) {
+			if (power_state == AC_PWRST_D3 &&
+			    wid_type == AC_WID_PIN) {
 				unsigned int pincap;
 				/*
 				 * don't power down the widget if it controls
@@ -2333,7 +2375,7 @@
 						nid, 0,
 						AC_VERB_GET_EAPD_BTLENABLE, 0);
 					eapd &= 0x02;
-					if (power_state == AC_PWRST_D3 && eapd)
+					if (eapd)
 						continue;
 				}
 			}
@@ -2544,6 +2586,41 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_calc_stream_format);
 
+static unsigned int get_pcm_param(struct hda_codec *codec, hda_nid_t nid)
+{
+	unsigned int val = 0;
+	if (nid != codec->afg &&
+	    (get_wcaps(codec, nid) & AC_WCAP_FORMAT_OVRD))
+		val = snd_hda_param_read(codec, nid, AC_PAR_PCM);
+	if (!val || val == -1)
+		val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM);
+	if (!val || val == -1)
+		return 0;
+	return val;
+}
+
+static unsigned int query_pcm_param(struct hda_codec *codec, hda_nid_t nid)
+{
+	return query_caps_hash(codec, nid, HDA_HASH_PARPCM_KEY(nid),
+			       get_pcm_param);
+}
+
+static unsigned int get_stream_param(struct hda_codec *codec, hda_nid_t nid)
+{
+	unsigned int streams = snd_hda_param_read(codec, nid, AC_PAR_STREAM);
+	if (!streams || streams == -1)
+		streams = snd_hda_param_read(codec, codec->afg, AC_PAR_STREAM);
+	if (!streams || streams == -1)
+		return 0;
+	return streams;
+}
+
+static unsigned int query_stream_param(struct hda_codec *codec, hda_nid_t nid)
+{
+	return query_caps_hash(codec, nid, HDA_HASH_PARSTR_KEY(nid),
+			       get_stream_param);
+}
+
 /**
  * snd_hda_query_supported_pcm - query the supported PCM rates and formats
  * @codec: the HDA codec
@@ -2562,15 +2639,8 @@
 {
 	unsigned int i, val, wcaps;
 
-	val = 0;
 	wcaps = get_wcaps(codec, nid);
-	if (nid != codec->afg && (wcaps & AC_WCAP_FORMAT_OVRD)) {
-		val = snd_hda_param_read(codec, nid, AC_PAR_PCM);
-		if (val == -1)
-			return -EIO;
-	}
-	if (!val)
-		val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM);
+	val = query_pcm_param(codec, nid);
 
 	if (ratesp) {
 		u32 rates = 0;
@@ -2592,15 +2662,9 @@
 		u64 formats = 0;
 		unsigned int streams, bps;
 
-		streams = snd_hda_param_read(codec, nid, AC_PAR_STREAM);
-		if (streams == -1)
+		streams = query_stream_param(codec, nid);
+		if (!streams)
 			return -EIO;
-		if (!streams) {
-			streams = snd_hda_param_read(codec, codec->afg,
-						     AC_PAR_STREAM);
-			if (streams == -1)
-				return -EIO;
-		}
 
 		bps = 0;
 		if (streams & AC_SUPFMT_PCM) {
@@ -2674,17 +2738,9 @@
 	int i;
 	unsigned int val = 0, rate, stream;
 
-	if (nid != codec->afg &&
-	    (get_wcaps(codec, nid) & AC_WCAP_FORMAT_OVRD)) {
-		val = snd_hda_param_read(codec, nid, AC_PAR_PCM);
-		if (val == -1)
-			return 0;
-	}
-	if (!val) {
-		val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM);
-		if (val == -1)
-			return 0;
-	}
+	val = query_pcm_param(codec, nid);
+	if (!val)
+		return 0;
 
 	rate = format & 0xff00;
 	for (i = 0; i < AC_PAR_PCM_RATE_BITS; i++)
@@ -2696,12 +2752,8 @@
 	if (i >= AC_PAR_PCM_RATE_BITS)
 		return 0;
 
-	stream = snd_hda_param_read(codec, nid, AC_PAR_STREAM);
-	if (stream == -1)
-		return 0;
-	if (!stream && nid != codec->afg)
-		stream = snd_hda_param_read(codec, codec->afg, AC_PAR_STREAM);
-	if (!stream || stream == -1)
+	stream = query_stream_param(codec, nid);
+	if (!stream)
 		return 0;
 
 	if (stream & AC_SUPFMT_PCM) {
@@ -3835,11 +3887,10 @@
 /**
  * snd_hda_suspend - suspend the codecs
  * @bus: the HDA bus
- * @state: suspsend state
  *
  * Returns 0 if successful.
  */
-int snd_hda_suspend(struct hda_bus *bus, pm_message_t state)
+int snd_hda_suspend(struct hda_bus *bus)
 {
 	struct hda_codec *codec;
 
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 2fdecf4..cad79ef 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -574,6 +574,8 @@
 	/* attach a PCM stream */
 	int (*attach_pcm)(struct hda_bus *bus, struct hda_codec *codec,
 			  struct hda_pcm *pcm);
+	/* reset bus for retry verb */
+	void (*bus_reset)(struct hda_bus *bus);
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	/* notify power-up/down from codec to controller */
 	void (*pm_notify)(struct hda_bus *bus);
@@ -622,7 +624,13 @@
 
 	/* misc op flags */
 	unsigned int needs_damn_long_delay :1;
+	unsigned int allow_bus_reset:1;	/* allow bus reset at fatal error */
+	unsigned int sync_write:1;	/* sync after verb write */
+	/* status for codec/controller */
 	unsigned int shutdown :1;	/* being unloaded */
+	unsigned int rirb_error:1;	/* error in codec communication */
+	unsigned int response_reset:1;	/* controller was reset */
+	unsigned int in_reset:1;	/* during reset operation */
 };
 
 /*
@@ -747,7 +755,8 @@
 	/* detected preset */
 	const struct hda_codec_preset *preset;
 	struct module *owner;
-	const char *name;	/* codec name */
+	const char *vendor_name;	/* codec vendor name */
+	const char *chip_name;		/* codec chip name */
 	const char *modelname;	/* model name for preset */
 
 	/* set by patch */
@@ -905,7 +914,7 @@
  * power management
  */
 #ifdef CONFIG_PM
-int snd_hda_suspend(struct hda_bus *bus, pm_message_t state);
+int snd_hda_suspend(struct hda_bus *bus);
 int snd_hda_resume(struct hda_bus *bus);
 #endif
 
diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
index 1c57505..6812fbe 100644
--- a/sound/pci/hda/hda_hwdep.c
+++ b/sound/pci/hda/hda_hwdep.c
@@ -242,7 +242,8 @@
 CODEC_INFO_SHOW(revision_id);
 CODEC_INFO_SHOW(afg);
 CODEC_INFO_SHOW(mfg);
-CODEC_INFO_STR_SHOW(name);
+CODEC_INFO_STR_SHOW(vendor_name);
+CODEC_INFO_STR_SHOW(chip_name);
 CODEC_INFO_STR_SHOW(modelname);
 
 #define CODEC_INFO_STORE(type)					\
@@ -275,7 +276,8 @@
 CODEC_INFO_STORE(vendor_id);
 CODEC_INFO_STORE(subsystem_id);
 CODEC_INFO_STORE(revision_id);
-CODEC_INFO_STR_STORE(name);
+CODEC_INFO_STR_STORE(vendor_name);
+CODEC_INFO_STR_STORE(chip_name);
 CODEC_INFO_STR_STORE(modelname);
 
 #define CODEC_ACTION_STORE(type)				\
@@ -499,7 +501,8 @@
 	CODEC_ATTR_RW(revision_id),
 	CODEC_ATTR_RO(afg),
 	CODEC_ATTR_RO(mfg),
-	CODEC_ATTR_RW(name),
+	CODEC_ATTR_RW(vendor_name),
+	CODEC_ATTR_RW(chip_name),
 	CODEC_ATTR_RW(modelname),
 	CODEC_ATTR_RW(init_verbs),
 	CODEC_ATTR_RW(hints),
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 3128e1a..4e9ea70 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -128,21 +128,33 @@
 			 "{ULI, M5461}}");
 MODULE_DESCRIPTION("Intel HDA driver");
 
+#ifdef CONFIG_SND_VERBOSE_PRINTK
+#define SFX	/* nop */
+#else
 #define SFX	"hda-intel: "
-
+#endif
 
 /*
  * registers
  */
 #define ICH6_REG_GCAP			0x00
+#define   ICH6_GCAP_64OK	(1 << 0)   /* 64bit address support */
+#define   ICH6_GCAP_NSDO	(3 << 1)   /* # of serial data out signals */
+#define   ICH6_GCAP_BSS		(31 << 3)  /* # of bidirectional streams */
+#define   ICH6_GCAP_ISS		(15 << 8)  /* # of input streams */
+#define   ICH6_GCAP_OSS		(15 << 12) /* # of output streams */
 #define ICH6_REG_VMIN			0x02
 #define ICH6_REG_VMAJ			0x03
 #define ICH6_REG_OUTPAY			0x04
 #define ICH6_REG_INPAY			0x06
 #define ICH6_REG_GCTL			0x08
+#define   ICH6_GCTL_RESET	(1 << 0)   /* controller reset */
+#define   ICH6_GCTL_FCNTRL	(1 << 1)   /* flush control */
+#define   ICH6_GCTL_UNSOL	(1 << 8)   /* accept unsol. response enable */
 #define ICH6_REG_WAKEEN			0x0c
 #define ICH6_REG_STATESTS		0x0e
 #define ICH6_REG_GSTS			0x10
+#define   ICH6_GSTS_FSTS	(1 << 1)   /* flush status */
 #define ICH6_REG_INTCTL			0x20
 #define ICH6_REG_INTSTS			0x24
 #define ICH6_REG_WALCLK			0x30
@@ -150,17 +162,27 @@
 #define ICH6_REG_CORBLBASE		0x40
 #define ICH6_REG_CORBUBASE		0x44
 #define ICH6_REG_CORBWP			0x48
-#define ICH6_REG_CORBRP			0x4A
+#define ICH6_REG_CORBRP			0x4a
+#define   ICH6_CORBRP_RST	(1 << 15)  /* read pointer reset */
 #define ICH6_REG_CORBCTL		0x4c
+#define   ICH6_CORBCTL_RUN	(1 << 1)   /* enable DMA */
+#define   ICH6_CORBCTL_CMEIE	(1 << 0)   /* enable memory error irq */
 #define ICH6_REG_CORBSTS		0x4d
+#define   ICH6_CORBSTS_CMEI	(1 << 0)   /* memory error indication */
 #define ICH6_REG_CORBSIZE		0x4e
 
 #define ICH6_REG_RIRBLBASE		0x50
 #define ICH6_REG_RIRBUBASE		0x54
 #define ICH6_REG_RIRBWP			0x58
+#define   ICH6_RIRBWP_RST	(1 << 15)  /* write pointer reset */
 #define ICH6_REG_RINTCNT		0x5a
 #define ICH6_REG_RIRBCTL		0x5c
+#define   ICH6_RBCTL_IRQ_EN	(1 << 0)   /* enable IRQ */
+#define   ICH6_RBCTL_DMA_EN	(1 << 1)   /* enable DMA */
+#define   ICH6_RBCTL_OVERRUN_EN	(1 << 2)   /* enable overrun irq */
 #define ICH6_REG_RIRBSTS		0x5d
+#define   ICH6_RBSTS_IRQ	(1 << 0)   /* response irq */
+#define   ICH6_RBSTS_OVERRUN	(1 << 2)   /* overrun irq */
 #define ICH6_REG_RIRBSIZE		0x5e
 
 #define ICH6_REG_IC			0x60
@@ -257,16 +279,6 @@
 #define ICH6_INT_CTRL_EN	0x40000000 /* controller interrupt enable bit */
 #define ICH6_INT_GLOBAL_EN	0x80000000 /* global interrupt enable bit */
 
-/* GCTL unsolicited response enable bit */
-#define ICH6_GCTL_UREN		(1<<8)
-
-/* GCTL reset bit */
-#define ICH6_GCTL_RESET		(1<<0)
-
-/* CORB/RIRB control, read/write pointer */
-#define ICH6_RBCTL_DMA_EN	0x02	/* enable DMA */
-#define ICH6_RBCTL_IRQ_EN	0x01	/* enable IRQ */
-#define ICH6_RBRWP_CLR		0x8000	/* read/write pointer clear */
 /* below are so far hardcoded - should read registers in future */
 #define ICH6_MAX_CORB_ENTRIES	256
 #define ICH6_MAX_RIRB_ENTRIES	256
@@ -512,25 +524,25 @@
 	/* set the corb write pointer to 0 */
 	azx_writew(chip, CORBWP, 0);
 	/* reset the corb hw read pointer */
-	azx_writew(chip, CORBRP, ICH6_RBRWP_CLR);
+	azx_writew(chip, CORBRP, ICH6_CORBRP_RST);
 	/* enable corb dma */
-	azx_writeb(chip, CORBCTL, ICH6_RBCTL_DMA_EN);
+	azx_writeb(chip, CORBCTL, ICH6_CORBCTL_RUN);
 
 	/* RIRB set up */
 	chip->rirb.addr = chip->rb.addr + 2048;
 	chip->rirb.buf = (u32 *)(chip->rb.area + 2048);
+	chip->rirb.wp = chip->rirb.rp = chip->rirb.cmds = 0;
 	azx_writel(chip, RIRBLBASE, (u32)chip->rirb.addr);
 	azx_writel(chip, RIRBUBASE, upper_32_bits(chip->rirb.addr));
 
 	/* set the rirb size to 256 entries (ULI requires explicitly) */
 	azx_writeb(chip, RIRBSIZE, 0x02);
 	/* reset the rirb hw write pointer */
-	azx_writew(chip, RIRBWP, ICH6_RBRWP_CLR);
+	azx_writew(chip, RIRBWP, ICH6_RIRBWP_RST);
 	/* set N=1, get RIRB response interrupt for new entry */
 	azx_writew(chip, RINTCNT, 1);
 	/* enable rirb dma and response irq */
 	azx_writeb(chip, RIRBCTL, ICH6_RBCTL_DMA_EN | ICH6_RBCTL_IRQ_EN);
-	chip->rirb.rp = chip->rirb.cmds = 0;
 }
 
 static void azx_free_cmd_io(struct azx *chip)
@@ -606,6 +618,7 @@
 		}
 		if (!chip->rirb.cmds) {
 			smp_rmb();
+			bus->rirb_error = 0;
 			return chip->rirb.res; /* the last value */
 		}
 		if (time_after(jiffies, timeout))
@@ -619,19 +632,21 @@
 	}
 
 	if (chip->msi) {
-		snd_printk(KERN_WARNING "hda_intel: No response from codec, "
+		snd_printk(KERN_WARNING SFX "No response from codec, "
 			   "disabling MSI: last cmd=0x%08x\n", chip->last_cmd);
 		free_irq(chip->irq, chip);
 		chip->irq = -1;
 		pci_disable_msi(chip->pci);
 		chip->msi = 0;
-		if (azx_acquire_irq(chip, 1) < 0)
+		if (azx_acquire_irq(chip, 1) < 0) {
+			bus->rirb_error = 1;
 			return -1;
+		}
 		goto again;
 	}
 
 	if (!chip->polling_mode) {
-		snd_printk(KERN_WARNING "hda_intel: azx_get_response timeout, "
+		snd_printk(KERN_WARNING SFX "azx_get_response timeout, "
 			   "switching to polling mode: last cmd=0x%08x\n",
 			   chip->last_cmd);
 		chip->polling_mode = 1;
@@ -646,14 +661,23 @@
 		return -1;
 	}
 
+	/* a fatal communication error; need either to reset or to fallback
+	 * to the single_cmd mode
+	 */
+	bus->rirb_error = 1;
+	if (bus->allow_bus_reset && !bus->response_reset && !bus->in_reset) {
+		bus->response_reset = 1;
+		return -1; /* give a chance to retry */
+	}
+
 	snd_printk(KERN_ERR "hda_intel: azx_get_response timeout, "
 		   "switching to single_cmd mode: last cmd=0x%08x\n",
 		   chip->last_cmd);
-	chip->rirb.rp = azx_readb(chip, RIRBWP);
-	chip->rirb.cmds = 0;
-	/* switch to single_cmd mode */
 	chip->single_cmd = 1;
+	bus->response_reset = 0;
+	/* re-initialize CORB/RIRB */
 	azx_free_cmd_io(chip);
+	azx_init_cmd_io(chip);
 	return -1;
 }
 
@@ -667,12 +691,34 @@
  *       I left the codes, however, for debugging/testing purposes.
  */
 
+/* receive a response */
+static int azx_single_wait_for_response(struct azx *chip)
+{
+	int timeout = 50;
+
+	while (timeout--) {
+		/* check IRV busy bit */
+		if (azx_readw(chip, IRS) & ICH6_IRS_VALID) {
+			/* reuse rirb.res as the response return value */
+			chip->rirb.res = azx_readl(chip, IR);
+			return 0;
+		}
+		udelay(1);
+	}
+	if (printk_ratelimit())
+		snd_printd(SFX "get_response timeout: IRS=0x%x\n",
+			   azx_readw(chip, IRS));
+	chip->rirb.res = -1;
+	return -EIO;
+}
+
 /* send a command */
 static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
 {
 	struct azx *chip = bus->private_data;
 	int timeout = 50;
 
+	bus->rirb_error = 0;
 	while (timeout--) {
 		/* check ICB busy bit */
 		if (!((azx_readw(chip, IRS) & ICH6_IRS_BUSY))) {
@@ -682,7 +728,7 @@
 			azx_writel(chip, IC, val);
 			azx_writew(chip, IRS, azx_readw(chip, IRS) |
 				   ICH6_IRS_BUSY);
-			return 0;
+			return azx_single_wait_for_response(chip);
 		}
 		udelay(1);
 	}
@@ -696,18 +742,7 @@
 static unsigned int azx_single_get_response(struct hda_bus *bus)
 {
 	struct azx *chip = bus->private_data;
-	int timeout = 50;
-
-	while (timeout--) {
-		/* check IRV busy bit */
-		if (azx_readw(chip, IRS) & ICH6_IRS_VALID)
-			return azx_readl(chip, IR);
-		udelay(1);
-	}
-	if (printk_ratelimit())
-		snd_printd(SFX "get_response timeout: IRS=0x%x\n",
-			   azx_readw(chip, IRS));
-	return (unsigned int)-1;
+	return chip->rirb.res;
 }
 
 /*
@@ -775,17 +810,17 @@
 
 	/* check to see if controller is ready */
 	if (!azx_readb(chip, GCTL)) {
-		snd_printd("azx_reset: controller not ready!\n");
+		snd_printd(SFX "azx_reset: controller not ready!\n");
 		return -EBUSY;
 	}
 
 	/* Accept unsolicited responses */
-	azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UREN);
+	azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL);
 
 	/* detect codecs */
 	if (!chip->codec_mask) {
 		chip->codec_mask = azx_readw(chip, STATESTS);
-		snd_printdd("codec_mask = 0x%x\n", chip->codec_mask);
+		snd_printdd(SFX "codec_mask = 0x%x\n", chip->codec_mask);
 	}
 
 	return 0;
@@ -895,8 +930,7 @@
 	azx_int_enable(chip);
 
 	/* initialize the codec command I/O */
-	if (!chip->single_cmd)
-		azx_init_cmd_io(chip);
+	azx_init_cmd_io(chip);
 
 	/* program the position buffer */
 	azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr);
@@ -953,12 +987,12 @@
 	case AZX_DRIVER_SCH:
 		pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
 		if (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) {
-			pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC, \
+			pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC,
 				snoop & (~INTEL_SCH_HDA_DEVC_NOSNOOP));
 			pci_read_config_word(chip->pci,
 				INTEL_SCH_HDA_DEVC, &snoop);
-			snd_printdd("HDA snoop disabled, enabling ... %s\n",\
-				(snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) \
+			snd_printdd(SFX "HDA snoop disabled, enabling ... %s\n",
+				(snoop & INTEL_SCH_HDA_DEVC_NOSNOOP)
 				? "Failed" : "OK");
 		}
 		break;
@@ -1012,7 +1046,7 @@
 	/* clear rirb int */
 	status = azx_readb(chip, RIRBSTS);
 	if (status & RIRB_INT_MASK) {
-		if (!chip->single_cmd && (status & RIRB_INT_RESPONSE))
+		if (status & RIRB_INT_RESPONSE)
 			azx_update_rirb(chip);
 		azx_writeb(chip, RIRBSTS, RIRB_INT_MASK);
 	}
@@ -1098,7 +1132,7 @@
 				pos_align;
 		pos_adj = frames_to_bytes(runtime, pos_adj);
 		if (pos_adj >= period_bytes) {
-			snd_printk(KERN_WARNING "Too big adjustment %d\n",
+			snd_printk(KERN_WARNING SFX "Too big adjustment %d\n",
 				   bdl_pos_adj[chip->dev_index]);
 			pos_adj = 0;
 		} else {
@@ -1122,7 +1156,7 @@
 	return 0;
 
  error:
-	snd_printk(KERN_ERR "Too many BDL entries: buffer=%d, period=%d\n",
+	snd_printk(KERN_ERR SFX "Too many BDL entries: buffer=%d, period=%d\n",
 		   azx_dev->bufsize, period_bytes);
 	return -EINVAL;
 }
@@ -1215,7 +1249,7 @@
 	chip->probing = 0;
 	if (res == -1)
 		return -EIO;
-	snd_printdd("hda_intel: codec #%d probed OK\n", addr);
+	snd_printdd(SFX "codec #%d probed OK\n", addr);
 	return 0;
 }
 
@@ -1223,6 +1257,26 @@
 				 struct hda_pcm *cpcm);
 static void azx_stop_chip(struct azx *chip);
 
+static void azx_bus_reset(struct hda_bus *bus)
+{
+	struct azx *chip = bus->private_data;
+
+	bus->in_reset = 1;
+	azx_stop_chip(chip);
+	azx_init_chip(chip);
+#ifdef CONFIG_PM
+	if (chip->initialized) {
+		int i;
+
+		for (i = 0; i < AZX_MAX_PCMS; i++)
+			snd_pcm_suspend_all(chip->pcm[i]);
+		snd_hda_suspend(chip->bus);
+		snd_hda_resume(chip->bus);
+	}
+#endif
+	bus->in_reset = 0;
+}
+
 /*
  * Codec initialization
  */
@@ -1246,6 +1300,7 @@
 	bus_temp.ops.command = azx_send_cmd;
 	bus_temp.ops.get_response = azx_get_response;
 	bus_temp.ops.attach_pcm = azx_attach_pcm_stream;
+	bus_temp.ops.bus_reset = azx_bus_reset;
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	bus_temp.power_save = &power_save;
 	bus_temp.ops.pm_notify = azx_power_notify;
@@ -1270,8 +1325,8 @@
 				/* Some BIOSen give you wrong codec addresses
 				 * that don't exist
 				 */
-				snd_printk(KERN_WARNING
-					   "hda_intel: Codec #%d probe error; "
+				snd_printk(KERN_WARNING SFX
+					   "Codec #%d probe error; "
 					   "disabling it...\n", c);
 				chip->codec_mask &= ~(1 << c);
 				/* More badly, accessing to a non-existing
@@ -1487,7 +1542,7 @@
 	bufsize = snd_pcm_lib_buffer_bytes(substream);
 	period_bytes = snd_pcm_lib_period_bytes(substream);
 
-	snd_printdd("azx_pcm_prepare: bufsize=0x%x, format=0x%x\n",
+	snd_printdd(SFX "azx_pcm_prepare: bufsize=0x%x, format=0x%x\n",
 		    bufsize, format_val);
 
 	if (bufsize != azx_dev->bufsize ||
@@ -1830,7 +1885,7 @@
 			  &pcm);
 	if (err < 0)
 		return err;
-	strcpy(pcm->name, cpcm->name);
+	strlcpy(pcm->name, cpcm->name, sizeof(pcm->name));
 	apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
 	if (apcm == NULL)
 		return -ENOMEM;
@@ -1973,7 +2028,7 @@
 	for (i = 0; i < AZX_MAX_PCMS; i++)
 		snd_pcm_suspend_all(chip->pcm[i]);
 	if (chip->initialized)
-		snd_hda_suspend(chip->bus, state);
+		snd_hda_suspend(chip->bus);
 	azx_stop_chip(chip);
 	if (chip->irq >= 0) {
 		free_irq(chip->irq, chip);
@@ -2265,14 +2320,14 @@
 	synchronize_irq(chip->irq);
 
 	gcap = azx_readw(chip, GCAP);
-	snd_printdd("chipset global capabilities = 0x%x\n", gcap);
+	snd_printdd(SFX "chipset global capabilities = 0x%x\n", gcap);
 
 	/* ATI chips seems buggy about 64bit DMA addresses */
 	if (chip->driver_type == AZX_DRIVER_ATI)
-		gcap &= ~0x01;
+		gcap &= ~ICH6_GCAP_64OK;
 
 	/* allow 64bit DMA address if supported by H/W */
-	if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
+	if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
 		pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
 	else {
 		pci_set_dma_mask(pci, DMA_BIT_MASK(32));
@@ -2309,7 +2364,7 @@
 	chip->azx_dev = kcalloc(chip->num_streams, sizeof(*chip->azx_dev),
 				GFP_KERNEL);
 	if (!chip->azx_dev) {
-		snd_printk(KERN_ERR "cannot malloc azx_dev\n");
+		snd_printk(KERN_ERR SFX "cannot malloc azx_dev\n");
 		goto errout;
 	}
 
@@ -2332,11 +2387,9 @@
 		goto errout;
 	}
 	/* allocate CORB/RIRB */
-	if (!chip->single_cmd) {
-		err = azx_alloc_cmd_io(chip);
-		if (err < 0)
-			goto errout;
-	}
+	err = azx_alloc_cmd_io(chip);
+	if (err < 0)
+		goto errout;
 
 	/* initialize streams */
 	azx_init_stream(chip);
@@ -2359,9 +2412,11 @@
 	}
 
 	strcpy(card->driver, "HDA-Intel");
-	strcpy(card->shortname, driver_short_names[chip->driver_type]);
-	sprintf(card->longname, "%s at 0x%lx irq %i",
-		card->shortname, chip->addr, chip->irq);
+	strlcpy(card->shortname, driver_short_names[chip->driver_type],
+		sizeof(card->shortname));
+	snprintf(card->longname, sizeof(card->longname),
+		 "%s at 0x%lx irq %i",
+		 card->shortname, chip->addr, chip->irq);
 
 	*rchip = chip;
 	return 0;
@@ -2514,6 +2569,20 @@
 	{ PCI_DEVICE(0x10de, 0x0d97), .driver_data = AZX_DRIVER_NVIDIA },
 	/* Teradici */
 	{ PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA },
+	/* Creative X-Fi (CA0110-IBG) */
+#if !defined(CONFIG_SND_CTXFI) && !defined(CONFIG_SND_CTXFI_MODULE)
+	/* the following entry conflicts with snd-ctxfi driver,
+	 * as ctxfi driver mutates from HD-audio to native mode with
+	 * a special command sequence.
+	 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_ANY_ID),
+	  .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
+	  .class_mask = 0xffffff,
+	  .driver_data = AZX_DRIVER_GENERIC },
+#else
+	/* this entry seems still valid -- i.e. without emu20kx chip */
+	{ PCI_DEVICE(0x1102, 0x0009), .driver_data = AZX_DRIVER_GENERIC },
+#endif
 	/* AMD Generic, PCI class code and Vendor ID for HD Audio */
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_ANY_ID),
 	  .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c
index 93d7499..418c5d1 100644
--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -466,8 +466,12 @@
 	hda_nid_t nid;
 	int i, nodes;
 
-	snd_iprintf(buffer, "Codec: %s\n",
-		    codec->name ? codec->name : "Not Set");
+	snd_iprintf(buffer, "Codec: ");
+	if (codec->vendor_name && codec->chip_name)
+		snd_iprintf(buffer, "%s %s\n",
+			    codec->vendor_name, codec->chip_name);
+	else
+		snd_iprintf(buffer, "Not Set\n");
 	snd_iprintf(buffer, "Address: %d\n", codec->addr);
 	snd_iprintf(buffer, "Function Id: 0x%x\n", codec->function_id);
 	snd_iprintf(buffer, "Vendor Id: 0x%08x\n", codec->vendor_id);
diff --git a/sound/pci/hda/patch_ca0110.c b/sound/pci/hda/patch_ca0110.c
new file mode 100644
index 0000000..392d108
--- /dev/null
+++ b/sound/pci/hda/patch_ca0110.c
@@ -0,0 +1,573 @@
+/*
+ * HD audio interface patch for Creative X-Fi CA0110-IBG chip
+ *
+ * Copyright (c) 2008 Takashi Iwai <tiwai@suse.de>
+ *
+ *  This driver is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This driver is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <sound/core.h>
+#include "hda_codec.h"
+#include "hda_local.h"
+
+/*
+ */
+
+struct ca0110_spec {
+	struct auto_pin_cfg autocfg;
+	struct hda_multi_out multiout;
+	hda_nid_t out_pins[AUTO_CFG_MAX_OUTS];
+	hda_nid_t dacs[AUTO_CFG_MAX_OUTS];
+	hda_nid_t hp_dac;
+	hda_nid_t input_pins[AUTO_PIN_LAST];
+	hda_nid_t adcs[AUTO_PIN_LAST];
+	hda_nid_t dig_out;
+	hda_nid_t dig_in;
+	unsigned int num_inputs;
+	const char *input_labels[AUTO_PIN_LAST];
+	struct hda_pcm pcm_rec[2];	/* PCM information */
+};
+
+/*
+ * PCM callbacks
+ */
+static int ca0110_playback_pcm_open(struct hda_pcm_stream *hinfo,
+				    struct hda_codec *codec,
+				    struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream,
+					     hinfo);
+}
+
+static int ca0110_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+				       struct hda_codec *codec,
+				       unsigned int stream_tag,
+				       unsigned int format,
+				       struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_analog_prepare(codec, &spec->multiout,
+						stream_tag, format, substream);
+}
+
+static int ca0110_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+				       struct hda_codec *codec,
+				       struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout);
+}
+
+/*
+ * Digital out
+ */
+static int ca0110_dig_playback_pcm_open(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_dig_open(codec, &spec->multiout);
+}
+
+static int ca0110_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
+					 struct hda_codec *codec,
+					 struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
+}
+
+static int ca0110_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+					   struct hda_codec *codec,
+					   unsigned int stream_tag,
+					   unsigned int format,
+					   struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
+					     format, substream);
+}
+
+/*
+ * Analog capture
+ */
+static int ca0110_capture_pcm_prepare(struct hda_pcm_stream *hinfo,
+				      struct hda_codec *codec,
+				      unsigned int stream_tag,
+				      unsigned int format,
+				      struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+
+	snd_hda_codec_setup_stream(codec, spec->adcs[substream->number],
+				   stream_tag, 0, format);
+	return 0;
+}
+
+static int ca0110_capture_pcm_cleanup(struct hda_pcm_stream *hinfo,
+				      struct hda_codec *codec,
+				      struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+
+	snd_hda_codec_cleanup_stream(codec, spec->adcs[substream->number]);
+	return 0;
+}
+
+/*
+ */
+
+static char *dirstr[2] = { "Playback", "Capture" };
+
+static int _add_switch(struct hda_codec *codec, hda_nid_t nid, const char *pfx,
+		       int chan, int dir)
+{
+	char namestr[44];
+	int type = dir ? HDA_INPUT : HDA_OUTPUT;
+	struct snd_kcontrol_new knew =
+		HDA_CODEC_MUTE_MONO(namestr, nid, chan, 0, type);
+	sprintf(namestr, "%s %s Switch", pfx, dirstr[dir]);
+	return snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+}
+
+static int _add_volume(struct hda_codec *codec, hda_nid_t nid, const char *pfx,
+		       int chan, int dir)
+{
+	char namestr[44];
+	int type = dir ? HDA_INPUT : HDA_OUTPUT;
+	struct snd_kcontrol_new knew =
+		HDA_CODEC_VOLUME_MONO(namestr, nid, chan, 0, type);
+	sprintf(namestr, "%s %s Volume", pfx, dirstr[dir]);
+	return snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+}
+
+#define add_out_switch(codec, nid, pfx)	_add_switch(codec, nid, pfx, 3, 0)
+#define add_out_volume(codec, nid, pfx)	_add_volume(codec, nid, pfx, 3, 0)
+#define add_in_switch(codec, nid, pfx)	_add_switch(codec, nid, pfx, 3, 1)
+#define add_in_volume(codec, nid, pfx)	_add_volume(codec, nid, pfx, 3, 1)
+#define add_mono_switch(codec, nid, pfx, chan) \
+	_add_switch(codec, nid, pfx, chan, 0)
+#define add_mono_volume(codec, nid, pfx, chan) \
+	_add_volume(codec, nid, pfx, chan, 0)
+
+static int ca0110_build_controls(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	static char *prefix[AUTO_CFG_MAX_OUTS] = {
+		"Front", "Surround", NULL, "Side", "Multi"
+	};
+	hda_nid_t mutenid;
+	int i, err;
+
+	for (i = 0; i < spec->multiout.num_dacs; i++) {
+		if (get_wcaps(codec, spec->out_pins[i]) & AC_WCAP_OUT_AMP)
+			mutenid = spec->out_pins[i];
+		else
+			mutenid = spec->multiout.dac_nids[i];
+		if (!prefix[i]) {
+			err = add_mono_switch(codec, mutenid,
+					      "Center", 1);
+			if (err < 0)
+				return err;
+			err = add_mono_switch(codec, mutenid,
+					      "LFE", 1);
+			if (err < 0)
+				return err;
+			err = add_mono_volume(codec, spec->multiout.dac_nids[i],
+					      "Center", 1);
+			if (err < 0)
+				return err;
+			err = add_mono_volume(codec, spec->multiout.dac_nids[i],
+					      "LFE", 1);
+			if (err < 0)
+				return err;
+		} else {
+			err = add_out_switch(codec, mutenid,
+					     prefix[i]);
+			if (err < 0)
+				return err;
+			err = add_out_volume(codec, spec->multiout.dac_nids[i],
+					 prefix[i]);
+			if (err < 0)
+				return err;
+		}
+	}
+	if (cfg->hp_outs) {
+		if (get_wcaps(codec, cfg->hp_pins[0]) & AC_WCAP_OUT_AMP)
+			mutenid = cfg->hp_pins[0];
+		else
+			mutenid = spec->multiout.dac_nids[i];
+
+		err = add_out_switch(codec, mutenid, "Headphone");
+		if (err < 0)
+			return err;
+		if (spec->hp_dac) {
+			err = add_out_volume(codec, spec->hp_dac, "Headphone");
+			if (err < 0)
+				return err;
+		}
+	}
+	for (i = 0; i < spec->num_inputs; i++) {
+		const char *label = spec->input_labels[i];
+		if (get_wcaps(codec, spec->input_pins[i]) & AC_WCAP_IN_AMP)
+			mutenid = spec->input_pins[i];
+		else
+			mutenid = spec->adcs[i];
+		err = add_in_switch(codec, mutenid, label);
+		if (err < 0)
+			return err;
+		err = add_in_volume(codec, spec->adcs[i], label);
+		if (err < 0)
+			return err;
+	}
+
+	if (spec->dig_out) {
+		err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out);
+		if (err < 0)
+			return err;
+		err = snd_hda_create_spdif_share_sw(codec, &spec->multiout);
+		if (err < 0)
+			return err;
+		spec->multiout.share_spdif = 1;
+	}
+	if (spec->dig_in) {
+		err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in);
+		if (err < 0)
+			return err;
+		err = add_in_volume(codec, spec->dig_in, "IEC958");
+	}
+	return 0;
+}
+
+/*
+ */
+static struct hda_pcm_stream ca0110_pcm_analog_playback = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 8,
+	.ops = {
+		.open = ca0110_playback_pcm_open,
+		.prepare = ca0110_playback_pcm_prepare,
+		.cleanup = ca0110_playback_pcm_cleanup
+	},
+};
+
+static struct hda_pcm_stream ca0110_pcm_analog_capture = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+	.ops = {
+		.prepare = ca0110_capture_pcm_prepare,
+		.cleanup = ca0110_capture_pcm_cleanup
+	},
+};
+
+static struct hda_pcm_stream ca0110_pcm_digital_playback = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+	.ops = {
+		.open = ca0110_dig_playback_pcm_open,
+		.close = ca0110_dig_playback_pcm_close,
+		.prepare = ca0110_dig_playback_pcm_prepare
+	},
+};
+
+static struct hda_pcm_stream ca0110_pcm_digital_capture = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+};
+
+static int ca0110_build_pcms(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct hda_pcm *info = spec->pcm_rec;
+
+	codec->pcm_info = info;
+	codec->num_pcms = 0;
+
+	info->name = "CA0110 Analog";
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK] = ca0110_pcm_analog_playback;
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dacs[0];
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max =
+		spec->multiout.max_channels;
+	info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0110_pcm_analog_capture;
+	info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = spec->num_inputs;
+	info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0];
+	codec->num_pcms++;
+
+	if (!spec->dig_out && !spec->dig_in)
+		return 0;
+
+	info++;
+	info->name = "CA0110 Digital";
+	info->pcm_type = HDA_PCM_TYPE_SPDIF;
+	if (spec->dig_out) {
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK] =
+			ca0110_pcm_digital_playback;
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dig_out;
+	}
+	if (spec->dig_in) {
+		info->stream[SNDRV_PCM_STREAM_CAPTURE] =
+			ca0110_pcm_digital_capture;
+		info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in;
+	}
+	codec->num_pcms++;
+
+	return 0;
+}
+
+static void init_output(struct hda_codec *codec, hda_nid_t pin, hda_nid_t dac)
+{
+	if (pin) {
+		snd_hda_codec_write(codec, pin, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP);
+		if (get_wcaps(codec, pin) & AC_WCAP_OUT_AMP)
+			snd_hda_codec_write(codec, pin, 0,
+					    AC_VERB_SET_AMP_GAIN_MUTE,
+					    AMP_OUT_UNMUTE);
+	}
+	if (dac)
+		snd_hda_codec_write(codec, dac, 0,
+				    AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO);
+}
+
+static void init_input(struct hda_codec *codec, hda_nid_t pin, hda_nid_t adc)
+{
+	if (pin) {
+		snd_hda_codec_write(codec, pin, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80);
+		if (get_wcaps(codec, pin) & AC_WCAP_IN_AMP)
+			snd_hda_codec_write(codec, pin, 0,
+					    AC_VERB_SET_AMP_GAIN_MUTE,
+					    AMP_IN_UNMUTE(0));
+	}
+	if (adc)
+		snd_hda_codec_write(codec, adc, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+				    AMP_IN_UNMUTE(0));
+}
+
+static int ca0110_init(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	int i;
+
+	for (i = 0; i < spec->multiout.num_dacs; i++)
+		init_output(codec, spec->out_pins[i],
+			    spec->multiout.dac_nids[i]);
+	init_output(codec, cfg->hp_pins[0], spec->hp_dac);
+	init_output(codec, cfg->dig_out_pins[0], spec->dig_out);
+
+	for (i = 0; i < spec->num_inputs; i++)
+		init_input(codec, spec->input_pins[i], spec->adcs[i]);
+	init_input(codec, cfg->dig_in_pin, spec->dig_in);
+	return 0;
+}
+
+static void ca0110_free(struct hda_codec *codec)
+{
+	kfree(codec->spec);
+}
+
+static struct hda_codec_ops ca0110_patch_ops = {
+	.build_controls = ca0110_build_controls,
+	.build_pcms = ca0110_build_pcms,
+	.init = ca0110_init,
+	.free = ca0110_free,
+};
+
+
+static void parse_line_outs(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	int i, n;
+	unsigned int def_conf;
+	hda_nid_t nid;
+
+	n = 0;
+	for (i = 0; i < cfg->line_outs; i++) {
+		nid = cfg->line_out_pins[i];
+		def_conf = snd_hda_codec_get_pincfg(codec, nid);
+		if (!def_conf)
+			continue; /* invalid pin */
+		if (snd_hda_get_connections(codec, nid, &spec->dacs[i], 1) != 1)
+			continue;
+		spec->out_pins[n++] = nid;
+	}
+	spec->multiout.dac_nids = spec->dacs;
+	spec->multiout.num_dacs = n;
+	spec->multiout.max_channels = n * 2;
+}
+
+static void parse_hp_out(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	int i;
+	unsigned int def_conf;
+	hda_nid_t nid, dac;
+
+	if (!cfg->hp_outs)
+		return;
+	nid = cfg->hp_pins[0];
+	def_conf = snd_hda_codec_get_pincfg(codec, nid);
+	if (!def_conf) {
+		cfg->hp_outs = 0;
+		return;
+	}
+	if (snd_hda_get_connections(codec, nid, &dac, 1) != 1)
+		return;
+
+	for (i = 0; i < cfg->line_outs; i++)
+		if (dac == spec->dacs[i])
+			break;
+	if (i >= cfg->line_outs) {
+		spec->hp_dac = dac;
+		spec->multiout.hp_nid = dac;
+	}
+}
+
+static void parse_input(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	hda_nid_t nid, pin;
+	int n, i, j;
+
+	n = 0;
+	nid = codec->start_nid;
+	for (i = 0; i < codec->num_nodes; i++, nid++) {
+		unsigned int wcaps = get_wcaps(codec, nid);
+		unsigned int type = (wcaps & AC_WCAP_TYPE) >>
+			AC_WCAP_TYPE_SHIFT;
+		if (type != AC_WID_AUD_IN)
+			continue;
+		if (snd_hda_get_connections(codec, nid, &pin, 1) != 1)
+			continue;
+		if (pin == cfg->dig_in_pin) {
+			spec->dig_in = nid;
+			continue;
+		}
+		for (j = 0; j < AUTO_PIN_LAST; j++)
+			if (cfg->input_pins[j] == pin)
+				break;
+		if (j >= AUTO_PIN_LAST)
+			continue;
+		spec->input_pins[n] = pin;
+		spec->input_labels[n] = auto_pin_cfg_labels[j];
+		spec->adcs[n] = nid;
+		n++;
+	}
+	spec->num_inputs = n;
+}
+
+static void parse_digital(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+
+	if (cfg->dig_outs &&
+	    snd_hda_get_connections(codec, cfg->dig_out_pins[0],
+				    &spec->dig_out, 1) == 1)
+		spec->multiout.dig_out_nid = cfg->dig_out_pins[0];
+}
+
+static int ca0110_parse_auto_config(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	int err;
+
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
+	if (err < 0)
+		return err;
+
+	parse_line_outs(codec);
+	parse_hp_out(codec);
+	parse_digital(codec);
+	parse_input(codec);
+	return 0;
+}
+
+
+int patch_ca0110(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec;
+	int err;
+
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (!spec)
+		return -ENOMEM;
+	codec->spec = spec;
+
+	codec->bus->needs_damn_long_delay = 1;
+
+	err = ca0110_parse_auto_config(codec);
+	if (err < 0)
+		goto error;
+
+	codec->patch_ops = ca0110_patch_ops;
+
+	return 0;
+
+ error:
+	kfree(codec->spec);
+	codec->spec = NULL;
+	return err;
+}
+
+
+/*
+ * patch entries
+ */
+static struct hda_codec_preset snd_hda_preset_ca0110[] = {
+	{ .id = 0x1102000a, .name = "CA0110-IBG", .patch = patch_ca0110 },
+	{ .id = 0x1102000b, .name = "CA0110-IBG", .patch = patch_ca0110 },
+	{ .id = 0x1102000d, .name = "SB0880 X-Fi", .patch = patch_ca0110 },
+	{} /* terminator */
+};
+
+MODULE_ALIAS("snd-hda-codec-id:1102000a");
+MODULE_ALIAS("snd-hda-codec-id:1102000b");
+MODULE_ALIAS("snd-hda-codec-id:1102000d");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Creative CA0110-IBG HD-audio codec");
+
+static struct hda_codec_preset_list ca0110_list = {
+	.preset = snd_hda_preset_ca0110,
+	.owner = THIS_MODULE,
+};
+
+static int __init patch_ca0110_init(void)
+{
+	return snd_hda_add_codec_preset(&ca0110_list);
+}
+
+static void __exit patch_ca0110_exit(void)
+{
+	snd_hda_delete_codec_preset(&ca0110_list);
+}
+
+module_init(patch_ca0110_init)
+module_exit(patch_ca0110_exit)
diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index d57d813..f5792e2 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -35,9 +35,28 @@
 	struct hda_pcm pcm_rec;
 };
 
+#define Nv_VERB_SET_Channel_Allocation          0xF79
+#define Nv_VERB_SET_Info_Frame_Checksum         0xF7A
+#define Nv_VERB_SET_Audio_Protection_On         0xF98
+#define Nv_VERB_SET_Audio_Protection_Off        0xF99
+
+#define Nv_Master_Convert_nid   0x04
+#define Nv_Master_Pin_nid       0x05
+
+static hda_nid_t nvhdmi_convert_nids[4] = {
+	/*front, rear, clfe, rear_surr */
+	0x6, 0x8, 0xa, 0xc,
+};
+
 static struct hda_verb nvhdmi_basic_init[] = {
+	/* set audio protect on */
+	{ 0x1, Nv_VERB_SET_Audio_Protection_On, 0x1},
 	/* enable digital output on pin widget */
-	{ 0x05, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x5, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
+	{ 0x7, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
+	{ 0x9, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
+	{ 0xb, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
+	{ 0xd, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
 	{} /* terminator */
 };
 
@@ -66,48 +85,205 @@
  * Digital out
  */
 static int nvhdmi_dig_playback_pcm_open(struct hda_pcm_stream *hinfo,
-				     struct hda_codec *codec,
-				     struct snd_pcm_substream *substream)
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
 {
 	struct nvhdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_open(codec, &spec->multiout);
 }
 
-static int nvhdmi_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
-				      struct hda_codec *codec,
-				      struct snd_pcm_substream *substream)
+static int nvhdmi_dig_playback_pcm_close_8ch(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
+{
+	struct nvhdmi_spec *spec = codec->spec;
+	int i;
+
+	snd_hda_codec_write(codec, Nv_Master_Convert_nid,
+			0, AC_VERB_SET_CHANNEL_STREAMID, 0);
+	for (i = 0; i < 4; i++) {
+		/* set the stream id */
+		snd_hda_codec_write(codec, nvhdmi_convert_nids[i], 0,
+				AC_VERB_SET_CHANNEL_STREAMID, 0);
+		/* set the stream format */
+		snd_hda_codec_write(codec, nvhdmi_convert_nids[i], 0,
+				AC_VERB_SET_STREAM_FORMAT, 0);
+	}
+
+	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
+}
+
+static int nvhdmi_dig_playback_pcm_close_2ch(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
 {
 	struct nvhdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
 }
 
-static int nvhdmi_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
-					    struct hda_codec *codec,
-					    unsigned int stream_tag,
-					    unsigned int format,
-					    struct snd_pcm_substream *substream)
+static int nvhdmi_dig_playback_pcm_prepare_8ch(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					unsigned int stream_tag,
+					unsigned int format,
+					struct snd_pcm_substream *substream)
+{
+	int chs;
+	unsigned int dataDCC1, dataDCC2, chan, chanmask, channel_id;
+	int i;
+
+	mutex_lock(&codec->spdif_mutex);
+
+	chs = substream->runtime->channels;
+	chan = chs ? (chs - 1) : 1;
+
+	switch (chs) {
+	default:
+	case 0:
+	case 2:
+		chanmask = 0x00;
+		break;
+	case 4:
+		chanmask = 0x08;
+		break;
+	case 6:
+		chanmask = 0x0b;
+		break;
+	case 8:
+		chanmask = 0x13;
+		break;
+	}
+	dataDCC1 = AC_DIG1_ENABLE | AC_DIG1_COPYRIGHT;
+	dataDCC2 = 0x2;
+
+	/* set the Audio InforFrame Channel Allocation */
+	snd_hda_codec_write(codec, 0x1, 0,
+			Nv_VERB_SET_Channel_Allocation, chanmask);
+
+	/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
+	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
+		snd_hda_codec_write(codec,
+				Nv_Master_Convert_nid,
+				0,
+				AC_VERB_SET_DIGI_CONVERT_1,
+				codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
+
+	/* set the stream id */
+	snd_hda_codec_write(codec, Nv_Master_Convert_nid, 0,
+			AC_VERB_SET_CHANNEL_STREAMID, (stream_tag << 4) | 0x0);
+
+	/* set the stream format */
+	snd_hda_codec_write(codec, Nv_Master_Convert_nid, 0,
+			AC_VERB_SET_STREAM_FORMAT, format);
+
+	/* turn on again (if needed) */
+	/* enable and set the channel status audio/data flag */
+	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE)) {
+		snd_hda_codec_write(codec,
+				Nv_Master_Convert_nid,
+				0,
+				AC_VERB_SET_DIGI_CONVERT_1,
+				codec->spdif_ctls & 0xff);
+		snd_hda_codec_write(codec,
+				Nv_Master_Convert_nid,
+				0,
+				AC_VERB_SET_DIGI_CONVERT_2, dataDCC2);
+	}
+
+	for (i = 0; i < 4; i++) {
+		if (chs == 2)
+			channel_id = 0;
+		else
+			channel_id = i * 2;
+
+		/* turn off SPDIF once;
+		 *otherwise the IEC958 bits won't be updated
+		 */
+		if (codec->spdif_status_reset &&
+		(codec->spdif_ctls & AC_DIG1_ENABLE))
+			snd_hda_codec_write(codec,
+				nvhdmi_convert_nids[i],
+				0,
+				AC_VERB_SET_DIGI_CONVERT_1,
+				codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
+		/* set the stream id */
+		snd_hda_codec_write(codec,
+				nvhdmi_convert_nids[i],
+				0,
+				AC_VERB_SET_CHANNEL_STREAMID,
+				(stream_tag << 4) | channel_id);
+		/* set the stream format */
+		snd_hda_codec_write(codec,
+				nvhdmi_convert_nids[i],
+				0,
+				AC_VERB_SET_STREAM_FORMAT,
+				format);
+		/* turn on again (if needed) */
+		/* enable and set the channel status audio/data flag */
+		if (codec->spdif_status_reset &&
+		(codec->spdif_ctls & AC_DIG1_ENABLE)) {
+			snd_hda_codec_write(codec,
+					nvhdmi_convert_nids[i],
+					0,
+					AC_VERB_SET_DIGI_CONVERT_1,
+					codec->spdif_ctls & 0xff);
+			snd_hda_codec_write(codec,
+					nvhdmi_convert_nids[i],
+					0,
+					AC_VERB_SET_DIGI_CONVERT_2, dataDCC2);
+		}
+	}
+
+	/* set the Audio Info Frame Checksum */
+	snd_hda_codec_write(codec, 0x1, 0,
+			Nv_VERB_SET_Info_Frame_Checksum,
+			(0x71 - chan - chanmask));
+
+	mutex_unlock(&codec->spdif_mutex);
+	return 0;
+}
+
+static int nvhdmi_dig_playback_pcm_prepare_2ch(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					unsigned int stream_tag,
+					unsigned int format,
+					struct snd_pcm_substream *substream)
 {
 	struct nvhdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
-					     format, substream);
+					format, substream);
 }
 
-static struct hda_pcm_stream nvhdmi_pcm_digital_playback = {
+static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch = {
 	.substreams = 1,
 	.channels_min = 2,
-	.channels_max = 2,
-	.nid = 0x4, /* NID to query formats and rates and setup streams */
+	.channels_max = 8,
+	.nid = Nv_Master_Convert_nid,
 	.rates = SNDRV_PCM_RATE_48000,
 	.maxbps = 16,
 	.formats = SNDRV_PCM_FMTBIT_S16_LE,
 	.ops = {
 		.open = nvhdmi_dig_playback_pcm_open,
-		.close = nvhdmi_dig_playback_pcm_close,
-		.prepare = nvhdmi_dig_playback_pcm_prepare
+		.close = nvhdmi_dig_playback_pcm_close_8ch,
+		.prepare = nvhdmi_dig_playback_pcm_prepare_8ch
 	},
 };
 
-static int nvhdmi_build_pcms(struct hda_codec *codec)
+static struct hda_pcm_stream nvhdmi_pcm_digital_playback_2ch = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+	.nid = Nv_Master_Convert_nid,
+	.rates = SNDRV_PCM_RATE_48000,
+	.maxbps = 16,
+	.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	.ops = {
+		.open = nvhdmi_dig_playback_pcm_open,
+		.close = nvhdmi_dig_playback_pcm_close_2ch,
+		.prepare = nvhdmi_dig_playback_pcm_prepare_2ch
+	},
+};
+
+static int nvhdmi_build_pcms_8ch(struct hda_codec *codec)
 {
 	struct nvhdmi_spec *spec = codec->spec;
 	struct hda_pcm *info = &spec->pcm_rec;
@@ -117,7 +293,24 @@
 
 	info->name = "NVIDIA HDMI";
 	info->pcm_type = HDA_PCM_TYPE_HDMI;
-	info->stream[SNDRV_PCM_STREAM_PLAYBACK] = nvhdmi_pcm_digital_playback;
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK]
+					= nvhdmi_pcm_digital_playback_8ch;
+
+	return 0;
+}
+
+static int nvhdmi_build_pcms_2ch(struct hda_codec *codec)
+{
+	struct nvhdmi_spec *spec = codec->spec;
+	struct hda_pcm *info = &spec->pcm_rec;
+
+	codec->num_pcms = 1;
+	codec->pcm_info = info;
+
+	info->name = "NVIDIA HDMI";
+	info->pcm_type = HDA_PCM_TYPE_HDMI;
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK]
+					= nvhdmi_pcm_digital_playback_2ch;
 
 	return 0;
 }
@@ -127,14 +320,21 @@
 	kfree(codec->spec);
 }
 
-static struct hda_codec_ops nvhdmi_patch_ops = {
+static struct hda_codec_ops nvhdmi_patch_ops_8ch = {
 	.build_controls = nvhdmi_build_controls,
-	.build_pcms = nvhdmi_build_pcms,
+	.build_pcms = nvhdmi_build_pcms_8ch,
 	.init = nvhdmi_init,
 	.free = nvhdmi_free,
 };
 
-static int patch_nvhdmi(struct hda_codec *codec)
+static struct hda_codec_ops nvhdmi_patch_ops_2ch = {
+	.build_controls = nvhdmi_build_controls,
+	.build_pcms = nvhdmi_build_pcms_2ch,
+	.init = nvhdmi_init,
+	.free = nvhdmi_free,
+};
+
+static int patch_nvhdmi_8ch(struct hda_codec *codec)
 {
 	struct nvhdmi_spec *spec;
 
@@ -144,13 +344,30 @@
 
 	codec->spec = spec;
 
-	spec->multiout.num_dacs = 0;	  /* no analog */
-	spec->multiout.max_channels = 2;
-	spec->multiout.dig_out_nid = 0x4; /* NID for copying analog to digital,
-					   * seems to be unused in pure-digital
-					   * case. */
+	spec->multiout.num_dacs = 0;  /* no analog */
+	spec->multiout.max_channels = 8;
+	spec->multiout.dig_out_nid = Nv_Master_Convert_nid;
 
-	codec->patch_ops = nvhdmi_patch_ops;
+	codec->patch_ops = nvhdmi_patch_ops_8ch;
+
+	return 0;
+}
+
+static int patch_nvhdmi_2ch(struct hda_codec *codec)
+{
+	struct nvhdmi_spec *spec;
+
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (spec == NULL)
+		return -ENOMEM;
+
+	codec->spec = spec;
+
+	spec->multiout.num_dacs = 0;  /* no analog */
+	spec->multiout.max_channels = 2;
+	spec->multiout.dig_out_nid = Nv_Master_Convert_nid;
+
+	codec->patch_ops = nvhdmi_patch_ops_2ch;
 
 	return 0;
 }
@@ -159,11 +376,11 @@
  * patch entries
  */
 static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
-	{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi },
-	{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi },
-	{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi },
-	{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi },
-	{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi },
+	{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
+	{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
+	{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch },
+	{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
+	{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch },
 	{} /* terminator */
 };
 
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 0fd258e..337d2a5 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -190,6 +190,7 @@
 	ALC663_ASUS_MODE6,
 	ALC272_DELL,
 	ALC272_DELL_ZM1,
+	ALC272_SAMSUNG_NC10,
 	ALC662_AUTO,
 	ALC662_MODEL_LAST,
 };
@@ -205,6 +206,7 @@
 	ALC882_ASUS_A7M,
 	ALC885_MACPRO,
 	ALC885_MBP3,
+	ALC885_MB5,
 	ALC885_IMAC24,
 	ALC882_AUTO,
 	ALC882_MODEL_LAST,
@@ -218,9 +220,11 @@
 	ALC883_6ST_DIG,
 	ALC883_TARGA_DIG,
 	ALC883_TARGA_2ch_DIG,
+	ALC883_TARGA_8ch_DIG,
 	ALC883_ACER,
 	ALC883_ACER_ASPIRE,
 	ALC888_ACER_ASPIRE_4930G,
+	ALC888_ACER_ASPIRE_8930G,
 	ALC883_MEDION,
 	ALC883_MEDION_MD2,
 	ALC883_LAPTOP_EAPD,
@@ -238,7 +242,9 @@
 	ALC883_3ST_6ch_INTEL,
 	ALC888_ASUS_M90V,
 	ALC888_ASUS_EEE1601,
+	ALC889A_MB31,
 	ALC1200_ASUS_P5Q,
+	ALC883_SONY_VAIO_TT,
 	ALC883_AUTO,
 	ALC883_MODEL_LAST,
 };
@@ -253,6 +259,15 @@
 /* for GPIO Poll */
 #define GPIO_MASK	0x03
 
+/* extra amp-initialization sequence types */
+enum {
+	ALC_INIT_NONE,
+	ALC_INIT_DEFAULT,
+	ALC_INIT_GPIO1,
+	ALC_INIT_GPIO2,
+	ALC_INIT_GPIO3,
+};
+
 struct alc_spec {
 	/* codec parameterization */
 	struct snd_kcontrol_new *mixers[5];	/* mixer arrays */
@@ -266,13 +281,13 @@
 						 */
 	unsigned int num_init_verbs;
 
-	char *stream_name_analog;	/* analog PCM stream */
+	char stream_name_analog[16];	/* analog PCM stream */
 	struct hda_pcm_stream *stream_analog_playback;
 	struct hda_pcm_stream *stream_analog_capture;
 	struct hda_pcm_stream *stream_analog_alt_playback;
 	struct hda_pcm_stream *stream_analog_alt_capture;
 
-	char *stream_name_digital;	/* digital PCM stream */
+	char stream_name_digital[16];	/* digital PCM stream */
 	struct hda_pcm_stream *stream_digital_playback;
 	struct hda_pcm_stream *stream_digital_capture;
 
@@ -301,6 +316,8 @@
 	const struct hda_channel_mode *channel_mode;
 	int num_channel_mode;
 	int need_dac_fix;
+	int const_channel_count;
+	int ext_channel_count;
 
 	/* PCM information */
 	struct hda_pcm pcm_rec[3];	/* used in alc_build_pcms() */
@@ -322,6 +339,7 @@
 
 	/* other flags */
 	unsigned int no_analog :1; /* digital I/O only */
+	int init_amp;
 
 	/* for virtual master */
 	hda_nid_t vmaster_nid;
@@ -355,6 +373,7 @@
 	unsigned int num_channel_mode;
 	const struct hda_channel_mode *channel_mode;
 	int need_dac_fix;
+	int const_channel_count;
 	unsigned int num_mux_defs;
 	const struct hda_input_mux *input_mux;
 	void (*unsol_event)(struct hda_codec *, unsigned int);
@@ -449,7 +468,7 @@
 	struct alc_spec *spec = codec->spec;
 	return snd_hda_ch_mode_get(codec, ucontrol, spec->channel_mode,
 				   spec->num_channel_mode,
-				   spec->multiout.max_channels);
+				   spec->ext_channel_count);
 }
 
 static int alc_ch_mode_put(struct snd_kcontrol *kcontrol,
@@ -459,9 +478,12 @@
 	struct alc_spec *spec = codec->spec;
 	int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
 				      spec->num_channel_mode,
-				      &spec->multiout.max_channels);
-	if (err >= 0 && spec->need_dac_fix)
-		spec->multiout.num_dacs = spec->multiout.max_channels / 2;
+				      &spec->ext_channel_count);
+	if (err >= 0 && !spec->const_channel_count) {
+		spec->multiout.max_channels = spec->ext_channel_count;
+		if (spec->need_dac_fix)
+			spec->multiout.num_dacs = spec->multiout.max_channels / 2;
+	}
 	return err;
 }
 
@@ -841,8 +863,13 @@
 	spec->channel_mode = preset->channel_mode;
 	spec->num_channel_mode = preset->num_channel_mode;
 	spec->need_dac_fix = preset->need_dac_fix;
+	spec->const_channel_count = preset->const_channel_count;
 
-	spec->multiout.max_channels = spec->channel_mode[0].channels;
+	if (preset->const_channel_count)
+		spec->multiout.max_channels = preset->const_channel_count;
+	else
+		spec->multiout.max_channels = spec->channel_mode[0].channels;
+	spec->ext_channel_count = spec->channel_mode[0].channels;
 
 	spec->multiout.num_dacs = preset->num_dacs;
 	spec->multiout.dac_nids = preset->dac_nids;
@@ -921,20 +948,26 @@
 	alc_fix_pll(codec);
 }
 
-static void alc_sku_automute(struct hda_codec *codec)
+static void alc_automute_pin(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
 	unsigned int present;
-	unsigned int hp_nid = spec->autocfg.hp_pins[0];
-	unsigned int sp_nid = spec->autocfg.speaker_pins[0];
+	unsigned int nid = spec->autocfg.hp_pins[0];
+	int i;
 
 	/* need to execute and sync at first */
-	snd_hda_codec_read(codec, hp_nid, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, hp_nid, 0,
+	snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+	present = snd_hda_codec_read(codec, nid, 0,
 				     AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = (present & 0x80000000) != 0;
-	snd_hda_codec_write(codec, sp_nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    spec->jack_present ? 0 : PIN_OUT);
+	spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
+	for (i = 0; i < ARRAY_SIZE(spec->autocfg.speaker_pins); i++) {
+		nid = spec->autocfg.speaker_pins[i];
+		if (!nid)
+			break;
+		snd_hda_codec_write(codec, nid, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL,
+				    spec->jack_present ? 0 : PIN_OUT);
+	}
 }
 
 #if 0 /* it's broken in some acses -- temporarily disabled */
@@ -969,16 +1002,19 @@
 		res >>= 28;
 	else
 		res >>= 26;
-	if (res == ALC880_HP_EVENT)
-		alc_sku_automute(codec);
-
-	if (res == ALC880_MIC_EVENT)
+	switch (res) {
+	case ALC880_HP_EVENT:
+		alc_automute_pin(codec);
+		break;
+	case ALC880_MIC_EVENT:
 		alc_mic_automute(codec);
+		break;
+	}
 }
 
 static void alc_inithook(struct hda_codec *codec)
 {
-	alc_sku_automute(codec);
+	alc_automute_pin(codec);
 	alc_mic_automute(codec);
 }
 
@@ -1000,69 +1036,21 @@
 				    AC_VERB_SET_PROC_COEF, 0x3030);
 }
 
-/* 32-bit subsystem ID for BIOS loading in HD Audio codec.
- *	31 ~ 16 :	Manufacture ID
- *	15 ~ 8	:	SKU ID
- *	7  ~ 0	:	Assembly ID
- *	port-A --> pin 39/41, port-E --> pin 14/15, port-D --> pin 35/36
- */
-static void alc_subsystem_id(struct hda_codec *codec,
-			     unsigned int porta, unsigned int porte,
-			     unsigned int portd)
+static void alc_auto_init_amp(struct hda_codec *codec, int type)
 {
-	unsigned int ass, tmp, i;
-	unsigned nid;
-	struct alc_spec *spec = codec->spec;
+	unsigned int tmp;
 
-	ass = codec->subsystem_id & 0xffff;
-	if ((ass != codec->bus->pci->subsystem_device) && (ass & 1))
-		goto do_sku;
-
-	/*
-	 * 31~30	: port conetcivity
-	 * 29~21	: reserve
-	 * 20		: PCBEEP input
-	 * 19~16	: Check sum (15:1)
-	 * 15~1		: Custom
-	 * 0		: override
-	*/
-	nid = 0x1d;
-	if (codec->vendor_id == 0x10ec0260)
-		nid = 0x17;
-	ass = snd_hda_codec_get_pincfg(codec, nid);
-	if (!(ass & 1) && !(ass & 0x100000))
-		return;
-	if ((ass >> 30) != 1)	/* no physical connection */
-		return;
-
-	/* check sum */
-	tmp = 0;
-	for (i = 1; i < 16; i++) {
-		if ((ass >> i) & 1)
-			tmp++;
-	}
-	if (((ass >> 16) & 0xf) != tmp)
-		return;
-do_sku:
-	/*
-	 * 0 : override
-	 * 1 :	Swap Jack
-	 * 2 : 0 --> Desktop, 1 --> Laptop
-	 * 3~5 : External Amplifier control
-	 * 7~6 : Reserved
-	*/
-	tmp = (ass & 0x38) >> 3;	/* external Amp control */
-	switch (tmp) {
-	case 1:
+	switch (type) {
+	case ALC_INIT_GPIO1:
 		snd_hda_sequence_write(codec, alc_gpio1_init_verbs);
 		break;
-	case 3:
+	case ALC_INIT_GPIO2:
 		snd_hda_sequence_write(codec, alc_gpio2_init_verbs);
 		break;
-	case 7:
+	case ALC_INIT_GPIO3:
 		snd_hda_sequence_write(codec, alc_gpio3_init_verbs);
 		break;
-	case 5:	/* set EAPD output high */
+	case ALC_INIT_DEFAULT:
 		switch (codec->vendor_id) {
 		case 0x10ec0260:
 			snd_hda_codec_write(codec, 0x0f, 0,
@@ -1116,7 +1104,7 @@
 					    tmp | 0x2010);
 			break;
 		case 0x10ec0888:
-			/*alc888_coef_init(codec);*/ /* called in alc_init() */
+			alc888_coef_init(codec);
 			break;
 		case 0x10ec0267:
 		case 0x10ec0268:
@@ -1131,7 +1119,107 @@
 					    tmp | 0x3000);
 			break;
 		}
-	default:
+		break;
+	}
+}
+
+static void alc_init_auto_hp(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (!spec->autocfg.hp_pins[0])
+		return;
+
+	if (!spec->autocfg.speaker_pins[0]) {
+		if (spec->autocfg.line_out_pins[0] &&
+		    spec->autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT)
+			spec->autocfg.speaker_pins[0] =
+				spec->autocfg.line_out_pins[0];
+		else
+			return;
+	}
+
+	snd_printdd("realtek: Enable HP auto-muting on NID 0x%x\n",
+		    spec->autocfg.hp_pins[0]);
+	snd_hda_codec_write_cache(codec, spec->autocfg.hp_pins[0], 0,
+				  AC_VERB_SET_UNSOLICITED_ENABLE,
+				  AC_USRSP_EN | ALC880_HP_EVENT);
+	spec->unsol_event = alc_sku_unsol_event;
+}
+
+/* check subsystem ID and set up device-specific initialization;
+ * return 1 if initialized, 0 if invalid SSID
+ */
+/* 32-bit subsystem ID for BIOS loading in HD Audio codec.
+ *	31 ~ 16 :	Manufacture ID
+ *	15 ~ 8	:	SKU ID
+ *	7  ~ 0	:	Assembly ID
+ *	port-A --> pin 39/41, port-E --> pin 14/15, port-D --> pin 35/36
+ */
+static int alc_subsystem_id(struct hda_codec *codec,
+			    hda_nid_t porta, hda_nid_t porte,
+			    hda_nid_t portd)
+{
+	unsigned int ass, tmp, i;
+	unsigned nid;
+	struct alc_spec *spec = codec->spec;
+
+	ass = codec->subsystem_id & 0xffff;
+	if ((ass != codec->bus->pci->subsystem_device) && (ass & 1))
+		goto do_sku;
+
+	/* invalid SSID, check the special NID pin defcfg instead */
+	/*
+	 * 31~30	: port conetcivity
+	 * 29~21	: reserve
+	 * 20		: PCBEEP input
+	 * 19~16	: Check sum (15:1)
+	 * 15~1		: Custom
+	 * 0		: override
+	*/
+	nid = 0x1d;
+	if (codec->vendor_id == 0x10ec0260)
+		nid = 0x17;
+	ass = snd_hda_codec_get_pincfg(codec, nid);
+	snd_printd("realtek: No valid SSID, "
+		   "checking pincfg 0x%08x for NID 0x%x\n",
+		   ass, nid);
+	if (!(ass & 1) && !(ass & 0x100000))
+		return 0;
+	if ((ass >> 30) != 1)	/* no physical connection */
+		return 0;
+
+	/* check sum */
+	tmp = 0;
+	for (i = 1; i < 16; i++) {
+		if ((ass >> i) & 1)
+			tmp++;
+	}
+	if (((ass >> 16) & 0xf) != tmp)
+		return 0;
+do_sku:
+	snd_printd("realtek: Enabling init ASM_ID=0x%04x CODEC_ID=%08x\n",
+		   ass & 0xffff, codec->vendor_id);
+	/*
+	 * 0 : override
+	 * 1 :	Swap Jack
+	 * 2 : 0 --> Desktop, 1 --> Laptop
+	 * 3~5 : External Amplifier control
+	 * 7~6 : Reserved
+	*/
+	tmp = (ass & 0x38) >> 3;	/* external Amp control */
+	switch (tmp) {
+	case 1:
+		spec->init_amp = ALC_INIT_GPIO1;
+		break;
+	case 3:
+		spec->init_amp = ALC_INIT_GPIO2;
+		break;
+	case 7:
+		spec->init_amp = ALC_INIT_GPIO3;
+		break;
+	case 5:
+		spec->init_amp = ALC_INIT_DEFAULT;
 		break;
 	}
 
@@ -1139,7 +1227,7 @@
 	 * when the external headphone out jack is plugged"
 	 */
 	if (!(ass & 0x8000))
-		return;
+		return 1;
 	/*
 	 * 10~8 : Jack location
 	 * 12~11: Headphone out -> 00: PortA, 01: PortE, 02: PortD, 03: Resvered
@@ -1147,14 +1235,6 @@
 	 * 15   : 1 --> enable the function "Mute internal speaker
 	 *	        when the external headphone out jack is plugged"
 	 */
-	if (!spec->autocfg.speaker_pins[0]) {
-		if (spec->autocfg.line_out_pins[0])
-			spec->autocfg.speaker_pins[0] =
-				spec->autocfg.line_out_pins[0];
-		else
-			return;
-	}
-
 	if (!spec->autocfg.hp_pins[0]) {
 		tmp = (ass >> 11) & 0x3;	/* HP to chassis */
 		if (tmp == 0)
@@ -1164,23 +1244,23 @@
 		else if (tmp == 2)
 			spec->autocfg.hp_pins[0] = portd;
 		else
-			return;
+			return 1;
 	}
-	if (spec->autocfg.hp_pins[0])
-		snd_hda_codec_write(codec, spec->autocfg.hp_pins[0], 0,
-			AC_VERB_SET_UNSOLICITED_ENABLE,
-			AC_USRSP_EN | ALC880_HP_EVENT);
 
-#if 0 /* it's broken in some acses -- temporarily disabled */
-	if (spec->autocfg.input_pins[AUTO_PIN_MIC] &&
-		spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC])
-		snd_hda_codec_write(codec,
-			spec->autocfg.input_pins[AUTO_PIN_MIC], 0,
-			AC_VERB_SET_UNSOLICITED_ENABLE,
-			AC_USRSP_EN | ALC880_MIC_EVENT);
-#endif /* disabled */
+	alc_init_auto_hp(codec);
+	return 1;
+}
 
-	spec->unsol_event = alc_sku_unsol_event;
+static void alc_ssid_check(struct hda_codec *codec,
+			   hda_nid_t porta, hda_nid_t porte, hda_nid_t portd)
+{
+	if (!alc_subsystem_id(codec, porta, porte, portd)) {
+		struct alc_spec *spec = codec->spec;
+		snd_printd("realtek: "
+			   "Enable default setup for auto mode as fallback\n");
+		spec->init_amp = ALC_INIT_DEFAULT;
+		alc_init_auto_hp(codec);
+	}
 }
 
 /*
@@ -1315,32 +1395,58 @@
 	{}
 };
 
-static void alc888_fujitsu_xa3530_automute(struct hda_codec *codec)
+static void alc_automute_amp(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned int bits;
-	/* Line out presence */
-	present = snd_hda_codec_read(codec, 0x17, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	/* HP out presence */
-	present = present || snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
+	struct alc_spec *spec = codec->spec;
+	unsigned int val, mute;
+	hda_nid_t nid;
+	int i;
+
+	spec->jack_present = 0;
+	for (i = 0; i < ARRAY_SIZE(spec->autocfg.hp_pins); i++) {
+		nid = spec->autocfg.hp_pins[i];
+		if (!nid)
+			break;
+		val = snd_hda_codec_read(codec, nid, 0,
+					 AC_VERB_GET_PIN_SENSE, 0);
+		if (val & AC_PINSENSE_PRESENCE) {
+			spec->jack_present = 1;
+			break;
+		}
+	}
+
+	mute = spec->jack_present ? HDA_AMP_MUTE : 0;
 	/* Toggle internal speakers muting */
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	/* Toggle internal bass muting */
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
+	for (i = 0; i < ARRAY_SIZE(spec->autocfg.speaker_pins); i++) {
+		nid = spec->autocfg.speaker_pins[i];
+		if (!nid)
+			break;
+		snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
+					 HDA_AMP_MUTE, mute);
+	}
 }
 
-static void alc888_fujitsu_xa3530_unsol_event(struct hda_codec *codec,
-		unsigned int res)
+static void alc_automute_amp_unsol_event(struct hda_codec *codec,
+					 unsigned int res)
 {
-	if (res >> 26 == ALC880_HP_EVENT)
-		alc888_fujitsu_xa3530_automute(codec);
+	if (codec->vendor_id == 0x10ec0880)
+		res >>= 28;
+	else
+		res >>= 26;
+	if (res == ALC880_HP_EVENT)
+		alc_automute_amp(codec);
 }
 
+static void alc888_fujitsu_xa3530_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x17; /* line-out */
+	spec->autocfg.hp_pins[1] = 0x1b; /* hp */
+	spec->autocfg.speaker_pins[0] = 0x14; /* speaker */
+	spec->autocfg.speaker_pins[1] = 0x15; /* bass */
+	alc_automute_amp(codec);
+}
 
 /*
  * ALC888 Acer Aspire 4930G model
@@ -1364,6 +1470,59 @@
 	{ }
 };
 
+/*
+ * ALC889 Acer Aspire 8930G model
+ */
+
+static struct hda_verb alc889_acer_aspire_8930g_verbs[] = {
+/* Front Mic: set to PIN_IN (empty by default) */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Unselect Front Mic by default in input mixer 3 */
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)},
+/* Enable unsolicited event for HP jack */
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+/* Connect Internal Front to Front */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+/* Connect Internal Rear to Rear */
+	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x01},
+/* Connect Internal CLFE to CLFE */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
+/* Connect HP out to Front */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | PIN_HP},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+/* Enable all DACs */
+/*  DAC DISABLE/MUTE 1? */
+/*  setting bits 1-5 disables DAC nids 0x02-0x06 apparently. Init=0x38 */
+	{0x20, AC_VERB_SET_COEF_INDEX, 0x03},
+	{0x20, AC_VERB_SET_PROC_COEF, 0x0000},
+/*  DAC DISABLE/MUTE 2? */
+/*  some bit here disables the other DACs. Init=0x4900 */
+	{0x20, AC_VERB_SET_COEF_INDEX, 0x08},
+	{0x20, AC_VERB_SET_PROC_COEF, 0x0000},
+/* Enable amplifiers */
+	{0x14, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
+	{0x15, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
+/* DMIC fix
+ * This laptop has a stereo digital microphone. The mics are only 1cm apart
+ * which makes the stereo useless. However, either the mic or the ALC889
+ * makes the signal become a difference/sum signal instead of standard
+ * stereo, which is annoying. So instead we flip this bit which makes the
+ * codec replicate the sum signal to both channels, turning it into a
+ * normal mono mic.
+ */
+/*  DMIC_CONTROL? Init value = 0x0001 */
+	{0x20, AC_VERB_SET_COEF_INDEX, 0x0b},
+	{0x20, AC_VERB_SET_PROC_COEF, 0x0003},
+	{ }
+};
+
 static struct hda_input_mux alc888_2_capture_sources[2] = {
 	/* Front mic only available on one ADC */
 	{
@@ -1385,6 +1544,38 @@
 	}
 };
 
+static struct hda_input_mux alc889_capture_sources[3] = {
+	/* Digital mic only available on first "ADC" */
+	{
+		.num_items = 5,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Front Mic", 0xb },
+			{ "Input Mix", 0xa },
+		},
+	},
+	{
+		.num_items = 4,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Input Mix", 0xa },
+		},
+	},
+	{
+		.num_items = 4,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Input Mix", 0xa },
+		},
+	}
+};
+
 static struct snd_kcontrol_new alc888_base_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -1407,22 +1598,24 @@
 	{ } /* end */
 };
 
-static void alc888_acer_aspire_4930g_automute(struct hda_codec *codec)
+static void alc888_acer_aspire_4930g_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned int bits;
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
-static void alc888_acer_aspire_4930g_unsol_event(struct hda_codec *codec,
-		unsigned int res)
+static void alc889_acer_aspire_8930g_init_hook(struct hda_codec *codec)
 {
-	if (res >> 26 == ALC880_HP_EVENT)
-		alc888_acer_aspire_4930g_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	spec->autocfg.speaker_pins[2] = 0x1b;
+	alc_automute_amp(codec);
 }
 
 /*
@@ -2390,21 +2583,6 @@
 	{ }
 };
 
-/* toggle speaker-output according to the hp-jack state */
-static void alc880_uniwill_hp_automute(struct hda_codec *codec)
-{
- 	unsigned int present;
-	unsigned char bits;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
-
 /* auto-toggle front mic */
 static void alc880_uniwill_mic_automute(struct hda_codec *codec)
 {
@@ -2417,9 +2595,14 @@
 	snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1, HDA_AMP_MUTE, bits);
 }
 
-static void alc880_uniwill_automute(struct hda_codec *codec)
+static void alc880_uniwill_init_hook(struct hda_codec *codec)
 {
-	alc880_uniwill_hp_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x16;
+	alc_automute_amp(codec);
 	alc880_uniwill_mic_automute(codec);
 }
 
@@ -2430,24 +2613,22 @@
 	 * definition.  4bit tag is placed at 28 bit!
 	 */
 	switch (res >> 28) {
-	case ALC880_HP_EVENT:
-		alc880_uniwill_hp_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc880_uniwill_mic_automute(codec);
 		break;
+	default:
+		alc_automute_amp_unsol_event(codec, res);
+		break;
 	}
 }
 
-static void alc880_uniwill_p53_hp_automute(struct hda_codec *codec)
+static void alc880_uniwill_p53_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, HDA_AMP_MUTE, bits);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	alc_automute_amp(codec);
 }
 
 static void alc880_uniwill_p53_dcvol_automute(struct hda_codec *codec)
@@ -2469,10 +2650,10 @@
 	/* Looks like the unsol event is incompatible with the standard
 	 * definition.  4bit tag is placed at 28 bit!
 	 */
-	if ((res >> 28) == ALC880_HP_EVENT)
-		alc880_uniwill_p53_hp_automute(codec);
 	if ((res >> 28) == ALC880_DCVOL_EVENT)
 		alc880_uniwill_p53_dcvol_automute(codec);
+	else
+		alc_automute_amp_unsol_event(codec, res);
 }
 
 /*
@@ -2542,6 +2723,7 @@
 /* Enable GPIO mask and set output */
 #define alc880_gpio1_init_verbs	alc_gpio1_init_verbs
 #define alc880_gpio2_init_verbs	alc_gpio2_init_verbs
+#define alc880_gpio3_init_verbs	alc_gpio3_init_verbs
 
 /* Clevo m520g init */
 static struct hda_verb alc880_pin_clevo_init_verbs[] = {
@@ -2704,30 +2886,18 @@
 	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
 	/* jack sense */
-	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1},
+	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
 	{ }
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc880_lg_automute(struct hda_codec *codec)
+static void alc880_lg_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
-
-static void alc880_lg_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	/* Looks like the unsol event is incompatible with the standard
-	 * definition.  4bit tag is placed at 28 bit!
-	 */
-	if ((res >> 28) == 0x01)
-		alc880_lg_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x17;
+	alc_automute_amp(codec);
 }
 
 /*
@@ -2801,30 +2971,18 @@
 	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
 	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
 	/* jack sense */
-	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1},
+	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
 	{ }
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc880_lg_lw_automute(struct hda_codec *codec)
+static void alc880_lg_lw_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
-
-static void alc880_lg_lw_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	/* Looks like the unsol event is incompatible with the standard
-	 * definition.  4bit tag is placed at 28 bit!
-	 */
-	if ((res >> 28) == 0x01)
-		alc880_lg_lw_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
 static struct snd_kcontrol_new alc880_medion_rim_mixer[] = {
@@ -2871,16 +3029,10 @@
 /* toggle speaker-output according to the hp-jack state */
 static void alc880_medion_rim_automute(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	if (present)
+	struct alc_spec *spec = codec->spec;
+	alc_automute_amp(codec);
+	/* toggle EAPD */
+	if (spec->jack_present)
 		snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 0);
 	else
 		snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 2);
@@ -2896,6 +3048,15 @@
 		alc880_medion_rim_automute(codec);
 }
 
+static void alc880_medion_rim_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x1b;
+	alc880_medion_rim_automute(codec);
+}
+
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 static struct hda_amp_list alc880_loopbacks[] = {
 	{ 0x0b, HDA_INPUT, 0 },
@@ -2924,8 +3085,7 @@
 	unsigned int i;
 
 	alc_fix_pll(codec);
-	if (codec->vendor_id == 0x10ec0888)
-		alc888_coef_init(codec);
+	alc_auto_init_amp(codec, spec->init_amp);
 
 	for (i = 0; i < spec->num_init_verbs; i++)
 		snd_hda_sequence_write(codec, spec->init_verbs[i]);
@@ -3127,7 +3287,10 @@
 	if (spec->no_analog)
 		goto skip_analog;
 
+	snprintf(spec->stream_name_analog, sizeof(spec->stream_name_analog),
+		 "%s Analog", codec->chip_name);
 	info->name = spec->stream_name_analog;
+	
 	if (spec->stream_analog_playback) {
 		if (snd_BUG_ON(!spec->multiout.dac_nids))
 			return -EINVAL;
@@ -3153,6 +3316,9 @@
  skip_analog:
 	/* SPDIF for stream index #1 */
 	if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
+		snprintf(spec->stream_name_digital,
+			 sizeof(spec->stream_name_digital),
+			 "%s Digital", codec->chip_name);
 		codec->num_pcms = 2;
 	        codec->slave_dig_outs = spec->multiout.slave_dig_outs;
 		info = spec->pcm_rec + 1;
@@ -3755,7 +3921,7 @@
 		.channel_mode = alc880_2_jack_modes,
 		.input_mux = &alc880_f1734_capture_source,
 		.unsol_event = alc880_uniwill_p53_unsol_event,
-		.init_hook = alc880_uniwill_p53_hp_automute,
+		.init_hook = alc880_uniwill_p53_init_hook,
 	},
 	[ALC880_ASUS] = {
 		.mixers = { alc880_asus_mixer },
@@ -3832,7 +3998,7 @@
 		.need_dac_fix = 1,
 		.input_mux = &alc880_capture_source,
 		.unsol_event = alc880_uniwill_unsol_event,
-		.init_hook = alc880_uniwill_automute,
+		.init_hook = alc880_uniwill_init_hook,
 	},
 	[ALC880_UNIWILL_P53] = {
 		.mixers = { alc880_uniwill_p53_mixer },
@@ -3844,7 +4010,7 @@
 		.channel_mode = alc880_threestack_modes,
 		.input_mux = &alc880_capture_source,
 		.unsol_event = alc880_uniwill_p53_unsol_event,
-		.init_hook = alc880_uniwill_p53_hp_automute,
+		.init_hook = alc880_uniwill_p53_init_hook,
 	},
 	[ALC880_FUJITSU] = {
 		.mixers = { alc880_fujitsu_mixer },
@@ -3858,7 +4024,7 @@
 		.channel_mode = alc880_2_jack_modes,
 		.input_mux = &alc880_capture_source,
 		.unsol_event = alc880_uniwill_p53_unsol_event,
-		.init_hook = alc880_uniwill_p53_hp_automute,
+		.init_hook = alc880_uniwill_p53_init_hook,
 	},
 	[ALC880_CLEVO] = {
 		.mixers = { alc880_three_stack_mixer },
@@ -3883,8 +4049,8 @@
 		.channel_mode = alc880_lg_ch_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc880_lg_capture_source,
-		.unsol_event = alc880_lg_unsol_event,
-		.init_hook = alc880_lg_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc880_lg_init_hook,
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 		.loopbacks = alc880_lg_loopbacks,
 #endif
@@ -3899,8 +4065,8 @@
 		.num_channel_mode = ARRAY_SIZE(alc880_lg_lw_modes),
 		.channel_mode = alc880_lg_lw_modes,
 		.input_mux = &alc880_lg_lw_capture_source,
-		.unsol_event = alc880_lg_lw_unsol_event,
-		.init_hook = alc880_lg_lw_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc880_lg_lw_init_hook,
 	},
 	[ALC880_MEDION_RIM] = {
 		.mixers = { alc880_medion_rim_mixer },
@@ -3914,7 +4080,7 @@
 		.channel_mode = alc880_2_jack_modes,
 		.input_mux = &alc880_medion_rim_capture_source,
 		.unsol_event = alc880_medion_rim_unsol_event,
-		.init_hook = alc880_medion_rim_automute,
+		.init_hook = alc880_medion_rim_init_hook,
 	},
 #ifdef CONFIG_SND_DEBUG
 	[ALC880_TEST] = {
@@ -4199,7 +4365,6 @@
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i < spec->autocfg.line_outs; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -4304,6 +4469,8 @@
 	spec->num_mux_defs = 1;
 	spec->input_mux = &spec->private_imux[0];
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
@@ -4361,8 +4528,8 @@
 						  alc880_models,
 						  alc880_cfg_tbl);
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC880, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC880_AUTO;
 	}
 
@@ -4389,12 +4556,10 @@
 	if (board_config != ALC880_AUTO)
 		setup_preset(spec, &alc880_presets[board_config]);
 
-	spec->stream_name_analog = "ALC880 Analog";
 	spec->stream_analog_playback = &alc880_pcm_analog_playback;
 	spec->stream_analog_capture = &alc880_pcm_analog_capture;
 	spec->stream_analog_alt_capture = &alc880_pcm_analog_alt_capture;
 
-	spec->stream_name_digital = "ALC880 Digital";
 	spec->stream_digital_playback = &alc880_pcm_digital_playback;
 	spec->stream_digital_capture = &alc880_pcm_digital_capture;
 
@@ -5679,7 +5844,6 @@
 	struct alc_spec *spec = codec->spec;
 	hda_nid_t nid;
 
-	alc_subsystem_id(codec, 0x10, 0x15, 0x0f);
 	nid = spec->autocfg.line_out_pins[0];
 	if (nid) {
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -5789,6 +5953,8 @@
 	spec->num_mux_defs = 1;
 	spec->input_mux = &spec->private_imux[0];
 
+	alc_ssid_check(codec, 0x10, 0x15, 0x0f);
+
 	return 1;
 }
 
@@ -6006,8 +6172,9 @@
 						  alc260_models,
 						  alc260_cfg_tbl);
 	if (board_config < 0) {
-		snd_printd(KERN_INFO "hda_codec: Unknown model for ALC260, "
-			   "trying auto-probe from BIOS...\n");
+		snd_printd(KERN_INFO "hda_codec: Unknown model for %s, "
+			   "trying auto-probe from BIOS...\n",
+			   codec->chip_name);
 		board_config = ALC260_AUTO;
 	}
 
@@ -6034,11 +6201,9 @@
 	if (board_config != ALC260_AUTO)
 		setup_preset(spec, &alc260_presets[board_config]);
 
-	spec->stream_name_analog = "ALC260 Analog";
 	spec->stream_analog_playback = &alc260_pcm_analog_playback;
 	spec->stream_analog_capture = &alc260_pcm_analog_capture;
 
-	spec->stream_name_digital = "ALC260 Digital";
 	spec->stream_digital_playback = &alc260_pcm_digital_playback;
 	spec->stream_digital_capture = &alc260_pcm_digital_capture;
 
@@ -6115,6 +6280,16 @@
 		{ "CD", 0x4 },
 	},
 };
+
+static struct hda_input_mux mb5_capture_source = {
+	.num_items = 3,
+	.items = {
+		{ "Mic", 0x1 },
+		{ "Line", 0x2 },
+		{ "CD", 0x4 },
+	},
+};
+
 /*
  * 2ch mode
  */
@@ -6202,6 +6377,34 @@
 	{ 6, alc885_mbp_ch6_init },
 };
 
+/*
+ * 2ch
+ * Speakers/Woofer/HP = Front
+ * LineIn = Input
+ */
+static struct hda_verb alc885_mb5_ch2_init[] = {
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{ } /* end */
+};
+
+/*
+ * 6ch mode
+ * Speakers/HP = Front
+ * Woofer = LFE
+ * LineIn = Surround
+ */
+static struct hda_verb alc885_mb5_ch6_init[] = {
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{ } /* end */
+};
+
+static struct hda_channel_mode alc885_mb5_6ch_modes[2] = {
+	{ 2, alc885_mb5_ch2_init },
+	{ 6, alc885_mb5_ch6_init },
+};
 
 /* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
  *                 Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
@@ -6244,6 +6447,25 @@
 	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT),
 	{ } /* end */
 };
+
+static struct snd_kcontrol_new alc885_mb5_mixer[] = {
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("LFE Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("HP Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("HP Playback Switch", 0x0f, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE  ("Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Boost", 0x15, 0x00, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x19, 0x00, HDA_INPUT),
+	{ } /* end */
+};
+
 static struct snd_kcontrol_new alc882_w2jc_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -6471,6 +6693,55 @@
 	{ }
 };
 
+/* Macbook 5,1 */
+static struct hda_verb alc885_mb5_init_verbs[] = {
+	/* DACs */
+	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Front mixer */
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* Surround mixer */
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* LFE mixer */
+	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* HP mixer */
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* Front Pin (0x0c) */
+	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
+	/* LFE Pin (0x0e) */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01},
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x02},
+	/* HP Pin (0x0f) */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x14, AC_VERB_SET_CONNECT_SEL, 0x03},
+	/* Front Mic pin: input vref at 80% */
+	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* Line In pin */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	{ }
+};
+
 /* Macbook Pro rev3 */
 static struct hda_verb alc885_mbp3_init_verbs[] = {
 	/* Front mixer: unmute input/output amp left and right (volume = 0) */
@@ -6560,45 +6831,23 @@
 };
 
 /* Toggle speaker-output according to the hp-jack state */
-static void alc885_imac24_automute(struct hda_codec *codec)
+static void alc885_imac24_automute_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x18;
+	spec->autocfg.speaker_pins[1] = 0x1a;
+	alc_automute_amp(codec);
 }
 
-/* Processes unsolicited events. */
-static void alc885_imac24_unsol_event(struct hda_codec *codec,
-				      unsigned int res)
+static void alc885_mbp3_init_hook(struct hda_codec *codec)
 {
-	/* Headphone insertion or removal. */
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc885_imac24_automute(codec);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc885_mbp3_automute(struct hda_codec *codec)
-{
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x14,  HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? 0 : HDA_AMP_MUTE);
-
-}
-static void alc885_mbp3_unsol_event(struct hda_codec *codec,
-				    unsigned int res)
-{
-	/* Headphone insertion or removal. */
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc885_mbp3_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
 
@@ -6623,24 +6872,25 @@
 /* toggle speaker-output according to the hp-jack state */
 static void alc882_targa_automute(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+	struct alc_spec *spec = codec->spec;
+	alc_automute_amp(codec);
 	snd_hda_codec_write_cache(codec, 1, 0, AC_VERB_SET_GPIO_DATA,
-				  present ? 1 : 3);
+				  spec->jack_present ? 1 : 3);
+}
+
+static void alc882_targa_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x1b;
+	alc882_targa_automute(codec);
 }
 
 static void alc882_targa_unsol_event(struct hda_codec *codec, unsigned int res)
 {
-	/* Looks like the unsol event is incompatible with the standard
-	 * definition.  4bit tag is placed at 26 bit!
-	 */
-	if (((res >> 26) == ALC880_HP_EVENT)) {
+	if ((res >> 26) == ALC880_HP_EVENT)
 		alc882_targa_automute(codec);
-	}
 }
 
 static struct hda_verb alc882_asus_a7j_verbs[] = {
@@ -6722,7 +6972,7 @@
 static void alc885_imac24_init_hook(struct hda_codec *codec)
 {
 	alc885_macpro_init_hook(codec);
-	alc885_imac24_automute(codec);
+	alc885_imac24_automute_init_hook(codec);
 }
 
 /*
@@ -6815,6 +7065,7 @@
 	[ALC882_ASUS_A7J]	= "asus-a7j",
 	[ALC882_ASUS_A7M]	= "asus-a7m",
 	[ALC885_MACPRO]		= "macpro",
+	[ALC885_MB5]		= "mb5",
 	[ALC885_MBP3]		= "mbp3",
 	[ALC885_IMAC24]		= "imac24",
 	[ALC882_AUTO]		= "auto",
@@ -6892,8 +7143,20 @@
 		.input_mux = &alc882_capture_source,
 		.dig_out_nid = ALC882_DIGOUT_NID,
 		.dig_in_nid = ALC882_DIGIN_NID,
-		.unsol_event = alc885_mbp3_unsol_event,
-		.init_hook = alc885_mbp3_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc885_mbp3_init_hook,
+	},
+	[ALC885_MB5] = {
+		.mixers = { alc885_mb5_mixer, alc882_chmode_mixer },
+		.init_verbs = { alc885_mb5_init_verbs,
+				alc880_gpio1_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc882_dac_nids),
+		.dac_nids = alc882_dac_nids,
+		.channel_mode = alc885_mb5_6ch_modes,
+		.num_channel_mode = ARRAY_SIZE(alc885_mb5_6ch_modes),
+		.input_mux = &mb5_capture_source,
+		.dig_out_nid = ALC882_DIGOUT_NID,
+		.dig_in_nid = ALC882_DIGIN_NID,
 	},
 	[ALC885_MACPRO] = {
 		.mixers = { alc882_macpro_mixer },
@@ -6917,7 +7180,7 @@
 		.num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
 		.channel_mode = alc882_ch_modes,
 		.input_mux = &alc882_capture_source,
-		.unsol_event = alc885_imac24_unsol_event,
+		.unsol_event = alc_automute_amp_unsol_event,
 		.init_hook = alc885_imac24_init_hook,
 	},
 	[ALC882_TARGA] = {
@@ -6934,7 +7197,7 @@
 		.need_dac_fix = 1,
 		.input_mux = &alc882_capture_source,
 		.unsol_event = alc882_targa_unsol_event,
-		.init_hook = alc882_targa_automute,
+		.init_hook = alc882_targa_init_hook,
 	},
 	[ALC882_ASUS_A7J] = {
 		.mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer },
@@ -7014,7 +7277,6 @@
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -7197,10 +7459,17 @@
 		case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
 		case 0x106b00a4: /* MacbookPro4,1 */
 		case 0x106b2c00: /* Macbook Pro rev3 */
-		case 0x106b3600: /* Macbook 3.1 */
+		/* Macbook 3.1 (0x106b3600) is handled by patch_alc883() */
 		case 0x106b3800: /* MacbookPro4,1 - latter revision */
 			board_config = ALC885_MBP3;
 			break;
+		case 0x106b3f00: /* Macbook 5,1 */
+		case 0x106b4000: /* Macbook Pro 5,1 - FIXME: HP jack sense
+				  *   seems not working, so apparently
+				  *   no perfect solution yet
+				  */
+			board_config = ALC885_MB5;
+			break;
 		default:
 			/* ALC889A is handled better as ALC888-compatible */
 			if (codec->revision_id == 0x100101 ||
@@ -7208,8 +7477,9 @@
 				alc_free(codec);
 				return patch_alc883(codec);
 			}
-			printk(KERN_INFO "hda_codec: Unknown model for ALC882, "
-		       			 "trying auto-probe from BIOS...\n");
+			printk(KERN_INFO "hda_codec: Unknown model for %s, "
+			       "trying auto-probe from BIOS...\n",
+			       codec->chip_name);
 			board_config = ALC882_AUTO;
 		}
 	}
@@ -7239,14 +7509,6 @@
 	if (board_config != ALC882_AUTO)
 		setup_preset(spec, &alc882_presets[board_config]);
 
-	if (codec->vendor_id == 0x10ec0885) {
-		spec->stream_name_analog = "ALC885 Analog";
-		spec->stream_name_digital = "ALC885 Digital";
-	} else {
-		spec->stream_name_analog = "ALC882 Analog";
-		spec->stream_name_digital = "ALC882 Digital";
-	}
-
 	spec->stream_analog_playback = &alc882_pcm_analog_playback;
 	spec->stream_analog_capture = &alc882_pcm_analog_capture;
 	/* FIXME: setup DAC5 */
@@ -7399,6 +7661,17 @@
 	},
 };
 
+static struct hda_input_mux alc889A_mb31_capture_source = {
+	.num_items = 2,
+	.items = {
+		{ "Mic", 0x0 },
+		/* Front Mic (0x01) unused */
+		{ "Line", 0x2 },
+		/* Line 2 (0x03) unused */
+		/* CD (0x04) unsused? */
+	},
+};
+
 /*
  * 2ch mode
  */
@@ -7448,6 +7721,73 @@
 	{ 6, alc883_3ST_ch6_init },
 };
 
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc883_4ST_ch2_init[] = {
+	{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+	{ } /* end */
+};
+
+/*
+ * 4ch mode
+ */
+static struct hda_verb alc883_4ST_ch4_init[] = {
+	{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	{ } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_4ST_ch6_init[] = {
+	{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	{ } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc883_4ST_ch8_init[] = {
+	{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
+	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	{ } /* end */
+};
+
+static struct hda_channel_mode alc883_4ST_8ch_modes[4] = {
+	{ 2, alc883_4ST_ch2_init },
+	{ 4, alc883_4ST_ch4_init },
+	{ 6, alc883_4ST_ch6_init },
+	{ 8, alc883_4ST_ch8_init },
+};
+
+
 /*
  * 2ch mode
  */
@@ -7517,6 +7857,49 @@
 	{ 8, alc883_sixstack_ch8_init },
 };
 
+/* 2ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:front) */
+static struct hda_verb alc889A_mb31_ch2_init[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},             /* HP as front */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},    /* Line as input */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},   /* Line off */
+	{ } /* end */
+};
+
+/* 4ch mode (Speaker:front, Subwoofer:CLFE, Line:CLFE, Headphones:front) */
+static struct hda_verb alc889A_mb31_ch4_init[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},             /* HP as front */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},   /* Line as output */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line on */
+	{ } /* end */
+};
+
+/* 5ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:rear) */
+static struct hda_verb alc889A_mb31_ch5_init[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},             /* HP as rear */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},    /* Line as input */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},   /* Line off */
+	{ } /* end */
+};
+
+/* 6ch mode (Speaker:front, Subwoofer:off, Line:CLFE, Headphones:Rear) */
+static struct hda_verb alc889A_mb31_ch6_init[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},             /* HP as front */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},   /* Subwoofer off */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},   /* Line as output */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line on */
+	{ } /* end */
+};
+
+static struct hda_channel_mode alc889A_mb31_6ch_modes[4] = {
+	{ 2, alc889A_mb31_ch2_init },
+	{ 4, alc889A_mb31_ch4_init },
+	{ 5, alc889A_mb31_ch5_init },
+	{ 6, alc889A_mb31_ch6_init },
+};
+
 static struct hda_verb alc883_medion_eapd_verbs[] = {
         /* eanable EAPD on medion laptop */
 	{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
@@ -7782,8 +8165,6 @@
 	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0d, 2, 2, HDA_INPUT),
 	HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("iSpeaker Playback Switch", 0x1a, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
@@ -7797,6 +8178,42 @@
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc889A_mb31_mixer[] = {
+	/* Output mixers */
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x00,
+		HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 0x02, HDA_INPUT),
+	/* Output switches */
+	HDA_CODEC_MUTE("Enable Speaker", 0x14, 0x00, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Enable Headphones", 0x15, 0x00, HDA_OUTPUT),
+	HDA_CODEC_MUTE_MONO("Enable LFE", 0x16, 2, 0x00, HDA_OUTPUT),
+	/* Boost mixers */
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Boost", 0x1a, 0x00, HDA_INPUT),
+	/* Input mixers */
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x00, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	{ } /* end */
+};
+
+static struct snd_kcontrol_new alc883_vaiott_mixer[] = {
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x19, 0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+	{ } /* end */
+};
+
 static struct hda_bind_ctls alc883_bind_cap_vol = {
 	.ops = &snd_hda_bind_vol,
 	.values = {
@@ -7932,16 +8349,14 @@
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_mitac_hp_automute(struct hda_codec *codec)
+static void alc883_mitac_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x17;
+	alc_automute_amp(codec);
 }
 
 /* auto-toggle front mic */
@@ -7958,25 +8373,6 @@
 }
 */
 
-static void alc883_mitac_automute(struct hda_codec *codec)
-{
-	alc883_mitac_hp_automute(codec);
-	/* alc883_mitac_mic_automute(codec); */
-}
-
-static void alc883_mitac_unsol_event(struct hda_codec *codec,
-					   unsigned int res)
-{
-	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc883_mitac_hp_automute(codec);
-		break;
-	case ALC880_MIC_EVENT:
-		/* alc883_mitac_mic_automute(codec); */
-		break;
-	}
-}
-
 static struct hda_verb alc883_mitac_verbs[] = {
 	/* HP */
 	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
@@ -8028,14 +8424,24 @@
 	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
 
-	{0x18, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mic/clfe */
-	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line/surround */
-	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
+/* Connect Line-Out side jack (SPDIF) to Side */
+	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
+/* Connect Mic jack to CLFE */
+	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x18, AC_VERB_SET_CONNECT_SEL, 0x02},
+/* Connect Line-in jack to Surround */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
+/* Connect HP out jack to Front */
+	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
 
 	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
-	{0x01, AC_VERB_SET_GPIO_MASK, 0x03},
-	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x03},
-	{0x01, AC_VERB_SET_GPIO_DATA, 0x03},
 
 	{ } /* end */
 };
@@ -8094,29 +8500,26 @@
 	{ }
 };
 
-static void alc888_3st_hp_front_automute(struct hda_codec *codec)
-{
-	unsigned int present, bits;
+static struct hda_verb alc883_vaiott_verbs[] = {
+	/* HP */
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-			AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
+	/* enable unsolicited event */
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
 
-static void alc888_3st_hp_unsol_event(struct hda_codec *codec,
-				      unsigned int res)
+	{ } /* end */
+};
+
+static void alc888_3st_hp_init_hook(struct hda_codec *codec)
 {
-	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc888_3st_hp_front_automute(codec);
-		break;
-	}
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	spec->autocfg.speaker_pins[2] = 0x18;
+	alc_automute_amp(codec);
 }
 
 static struct hda_verb alc888_3st_hp_verbs[] = {
@@ -8213,56 +8616,18 @@
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_medion_md2_automute(struct hda_codec *codec)
+static void alc883_medion_md2_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
-
-static void alc883_medion_md2_unsol_event(struct hda_codec *codec,
-					  unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_medion_md2_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	alc_automute_amp(codec);
 }
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_tagra_automute(struct hda_codec *codec)
-{
- 	unsigned int present;
-	unsigned char bits;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	snd_hda_codec_write_cache(codec, 1, 0, AC_VERB_SET_GPIO_DATA,
-				  present ? 1 : 3);
-}
-
-static void alc883_tagra_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_tagra_automute(codec);
-}
-
-/* toggle speaker-output according to the hp-jack state */
-static void alc883_clevo_m720_hp_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
+#define alc883_tagra_init_hook		alc882_targa_init_hook
+#define alc883_tagra_unsol_event	alc882_targa_unsol_event
 
 static void alc883_clevo_m720_mic_automute(struct hda_codec *codec)
 {
@@ -8274,9 +8639,13 @@
 				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 }
 
-static void alc883_clevo_m720_automute(struct hda_codec *codec)
+static void alc883_clevo_m720_init_hook(struct hda_codec *codec)
 {
-	alc883_clevo_m720_hp_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 	alc883_clevo_m720_mic_automute(codec);
 }
 
@@ -8284,52 +8653,32 @@
 					   unsigned int res)
 {
 	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc883_clevo_m720_hp_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc883_clevo_m720_mic_automute(codec);
 		break;
+	default:
+		alc_automute_amp_unsol_event(codec, res);
+		break;
 	}
 }
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_2ch_fujitsu_pi2515_automute(struct hda_codec *codec)
+static void alc883_2ch_fujitsu_pi2515_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
- 	present = snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	alc_automute_amp(codec);
 }
 
-static void alc883_2ch_fujitsu_pi2515_unsol_event(struct hda_codec *codec,
-						  unsigned int res)
+static void alc883_haier_w66_init_hook(struct hda_codec *codec)
 {
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_2ch_fujitsu_pi2515_automute(codec);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc883_haier_w66_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? 0x80 : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 0x80, bits);
-}
-
-static void alc883_haier_w66_unsol_event(struct hda_codec *codec,
-					 unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_haier_w66_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
 static void alc883_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
@@ -8337,8 +8686,8 @@
  	unsigned int present;
 	unsigned char bits;
 
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0)
+		& AC_PINSENSE_PRESENCE;
 	bits = present ? HDA_AMP_MUTE : 0;
 	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, bits);
@@ -8368,23 +8717,14 @@
 }
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_acer_aspire_automute(struct hda_codec *codec)
+static void alc883_acer_aspire_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
-
-static void alc883_acer_aspire_unsol_event(struct hda_codec *codec,
-					   unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_acer_aspire_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	alc_automute_amp(codec);
 }
 
 static struct hda_verb alc883_acer_eapd_verbs[] = {
@@ -8405,75 +8745,39 @@
 	{ }
 };
 
-static void alc888_6st_dell_front_automute(struct hda_codec *codec)
+static void alc888_6st_dell_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
- 	present = snd_hda_codec_read(codec, 0x1b, 0,
-				AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-				HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-				HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x15;
+	spec->autocfg.speaker_pins[2] = 0x16;
+	spec->autocfg.speaker_pins[3] = 0x17;
+	alc_automute_amp(codec);
 }
 
-static void alc888_6st_dell_unsol_event(struct hda_codec *codec,
-					     unsigned int res)
+static void alc888_lenovo_sky_init_hook(struct hda_codec *codec)
 {
-	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		/* printk(KERN_DEBUG "hp_event\n"); */
-		alc888_6st_dell_front_automute(codec);
-		break;
-	}
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x15;
+	spec->autocfg.speaker_pins[2] = 0x16;
+	spec->autocfg.speaker_pins[3] = 0x17;
+	spec->autocfg.speaker_pins[4] = 0x1a;
+	alc_automute_amp(codec);
 }
 
-static void alc888_lenovo_sky_front_automute(struct hda_codec *codec)
+static void alc883_vaiott_init_hook(struct hda_codec *codec)
 {
-	unsigned int mute;
-	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
-	snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present = (present & 0x80000000) != 0;
-	if (present) {
-		/* mute internal speaker */
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-		snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-		snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-		snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute internal speaker if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-		snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-		snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-		snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
-}
-
-static void alc883_lenovo_sky_unsol_event(struct hda_codec *codec,
-					     unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc888_lenovo_sky_front_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x17;
+	alc_automute_amp(codec);
 }
 
 /*
@@ -8561,39 +8865,33 @@
 			    0x7000 | (0x01 << 8) | (present ? 0x80 : 0));
 }
 
-static void alc883_M90V_speaker_automute(struct hda_codec *codec)
+static void alc883_M90V_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? 0 : PIN_OUT;
-	snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    bits);
-	snd_hda_codec_write(codec, 0x15, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    bits);
-	snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    bits);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x15;
+	spec->autocfg.speaker_pins[2] = 0x16;
+	alc_automute_pin(codec);
 }
 
 static void alc883_mode2_unsol_event(struct hda_codec *codec,
 					   unsigned int res)
 {
 	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc883_M90V_speaker_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc883_nb_mic_automute(codec);
 		break;
+	default:
+		alc_sku_unsol_event(codec, res);
+		break;
 	}
 }
 
 static void alc883_mode2_inithook(struct hda_codec *codec)
 {
-	alc883_M90V_speaker_automute(codec);
+	alc883_M90V_init_hook(codec);
 	alc883_nb_mic_automute(codec);
 }
 
@@ -8610,32 +8908,49 @@
 	{ } /* end */
 };
 
-static void alc883_eee1601_speaker_automute(struct hda_codec *codec)
+static void alc883_eee1601_inithook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? 0 : PIN_OUT;
-	snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    bits);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x1b;
+	alc_automute_pin(codec);
 }
 
-static void alc883_eee1601_unsol_event(struct hda_codec *codec,
-					   unsigned int res)
+static struct hda_verb alc889A_mb31_verbs[] = {
+	/* Init rear pin (used as headphone output) */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4},    /* Apple Headphones */
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},           /* Connect to front */
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+	/* Init line pin (used as output in 4ch and 6ch mode) */
+	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x02},           /* Connect to CLFE */
+	/* Init line 2 pin (used as headphone out by default) */
+	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},  /* Use as input */
+	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Mute output */
+	{ } /* end */
+};
+
+/* Mute speakers according to the headphone jack state */
+static void alc889A_mb31_automute(struct hda_codec *codec)
 {
-	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc883_eee1601_speaker_automute(codec);
-		break;
+	unsigned int present;
+
+	/* Mute only in 2ch or 4ch mode */
+	if (snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_CONNECT_SEL, 0)
+	    == 0x00) {
+		present = snd_hda_codec_read(codec, 0x15, 0,
+			AC_VERB_GET_PIN_SENSE, 0) & AC_PINSENSE_PRESENCE;
+		snd_hda_codec_amp_stereo(codec, 0x14,  HDA_OUTPUT, 0,
+			HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+		snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
+			HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 	}
 }
 
-static void alc883_eee1601_inithook(struct hda_codec *codec)
+static void alc889A_mb31_unsol_event(struct hda_codec *codec, unsigned int res)
 {
-	alc883_eee1601_speaker_automute(codec);
+	if ((res >> 26) == ALC880_HP_EVENT)
+		alc889A_mb31_automute(codec);
 }
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
@@ -8659,9 +8974,11 @@
 	[ALC883_6ST_DIG]	= "6stack-dig",
 	[ALC883_TARGA_DIG]	= "targa-dig",
 	[ALC883_TARGA_2ch_DIG]	= "targa-2ch-dig",
+	[ALC883_TARGA_8ch_DIG]	= "targa-8ch-dig",
 	[ALC883_ACER]		= "acer",
 	[ALC883_ACER_ASPIRE]	= "acer-aspire",
 	[ALC888_ACER_ASPIRE_4930G]	= "acer-aspire-4930g",
+	[ALC888_ACER_ASPIRE_8930G]	= "acer-aspire-8930g",
 	[ALC883_MEDION]		= "medion",
 	[ALC883_MEDION_MD2]	= "medion-md2",
 	[ALC883_LAPTOP_EAPD]	= "laptop-eapd",
@@ -8678,6 +8995,8 @@
 	[ALC888_FUJITSU_XA3530] = "fujitsu-xa3530",
 	[ALC883_3ST_6ch_INTEL]	= "3stack-6ch-intel",
 	[ALC1200_ASUS_P5Q]	= "asus-p5q",
+	[ALC889A_MB31]		= "mb31",
+	[ALC883_SONY_VAIO_TT]	= "sony-vaio-tt",
 	[ALC883_AUTO]		= "auto",
 };
 
@@ -8693,14 +9012,18 @@
 		ALC888_ACER_ASPIRE_4930G),
 	SND_PCI_QUIRK(0x1025, 0x013f, "Acer Aspire 5930G",
 		ALC888_ACER_ASPIRE_4930G),
+	SND_PCI_QUIRK(0x1025, 0x0145, "Acer Aspire 8930G",
+		ALC888_ACER_ASPIRE_8930G),
 	SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
 		ALC888_ACER_ASPIRE_4930G),
 	SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
 		ALC888_ACER_ASPIRE_4930G),
-	/* default Acer */
-	SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER),
+	/* default Acer -- disabled as it causes more problems.
+	 *    model=auto should work fine now
+	 */
+	/* SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER), */
 	SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
 	SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP),
@@ -8736,6 +9059,7 @@
 	SND_PCI_QUIRK(0x1462, 0x4314, "MSI", ALC883_TARGA_DIG),
 	SND_PCI_QUIRK(0x1462, 0x4319, "MSI", ALC883_TARGA_DIG),
 	SND_PCI_QUIRK(0x1462, 0x4324, "MSI", ALC883_TARGA_DIG),
+	SND_PCI_QUIRK(0x1462, 0x6510, "MSI GX620", ALC883_TARGA_8ch_DIG),
 	SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7187, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7250, "MSI", ALC883_6ST_DIG),
@@ -8768,6 +9092,7 @@
 	SND_PCI_QUIRK(0x8086, 0x2503, "82801H", ALC883_MITAC),
 	SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL),
 	SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
+	SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC883_SONY_VAIO_TT),
 	{}
 };
 
@@ -8848,7 +9173,7 @@
 		.need_dac_fix = 1,
 		.input_mux = &alc883_capture_source,
 		.unsol_event = alc883_tagra_unsol_event,
-		.init_hook = alc883_tagra_automute,
+		.init_hook = alc883_tagra_init_hook,
 	},
 	[ALC883_TARGA_2ch_DIG] = {
 		.mixers = { alc883_tagra_2ch_mixer},
@@ -8862,7 +9187,25 @@
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
 		.unsol_event = alc883_tagra_unsol_event,
-		.init_hook = alc883_tagra_automute,
+		.init_hook = alc883_tagra_init_hook,
+	},
+	[ALC883_TARGA_8ch_DIG] = {
+		.mixers = { alc883_base_mixer, alc883_chmode_mixer },
+		.init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs,
+				alc883_tagra_verbs },
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev),
+		.adc_nids = alc883_adc_nids_rev,
+		.capsrc_nids = alc883_capsrc_nids_rev,
+		.dig_out_nid = ALC883_DIGOUT_NID,
+		.dig_in_nid = ALC883_DIGIN_NID,
+		.num_channel_mode = ARRAY_SIZE(alc883_4ST_8ch_modes),
+		.channel_mode = alc883_4ST_8ch_modes,
+		.need_dac_fix = 1,
+		.input_mux = &alc883_capture_source,
+		.unsol_event = alc883_tagra_unsol_event,
+		.init_hook = alc883_tagra_init_hook,
 	},
 	[ALC883_ACER] = {
 		.mixers = { alc883_base_mixer },
@@ -8887,8 +9230,8 @@
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_acer_aspire_unsol_event,
-		.init_hook = alc883_acer_aspire_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_acer_aspire_init_hook,
 	},
 	[ALC888_ACER_ASPIRE_4930G] = {
 		.mixers = { alc888_base_mixer,
@@ -8907,8 +9250,29 @@
 		.num_mux_defs =
 			ARRAY_SIZE(alc888_2_capture_sources),
 		.input_mux = alc888_2_capture_sources,
-		.unsol_event = alc888_acer_aspire_4930g_unsol_event,
-		.init_hook = alc888_acer_aspire_4930g_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_acer_aspire_4930g_init_hook,
+	},
+	[ALC888_ACER_ASPIRE_8930G] = {
+		.mixers = { alc888_base_mixer,
+				alc883_chmode_mixer },
+		.init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs,
+				alc889_acer_aspire_8930g_verbs },
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc889_adc_nids),
+		.adc_nids = alc889_adc_nids,
+		.capsrc_nids = alc889_capsrc_nids,
+		.dig_out_nid = ALC883_DIGOUT_NID,
+		.num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
+		.channel_mode = alc883_3ST_6ch_modes,
+		.need_dac_fix = 1,
+		.const_channel_count = 6,
+		.num_mux_defs =
+			ARRAY_SIZE(alc889_capture_sources),
+		.input_mux = alc889_capture_sources,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc889_acer_aspire_8930g_init_hook,
 	},
 	[ALC883_MEDION] = {
 		.mixers = { alc883_fivestack_mixer,
@@ -8932,8 +9296,8 @@
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_medion_md2_unsol_event,
-		.init_hook = alc883_medion_md2_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_medion_md2_init_hook,
 	},
 	[ALC883_LAPTOP_EAPD] = {
 		.mixers = { alc883_base_mixer },
@@ -8954,7 +9318,7 @@
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
 		.unsol_event = alc883_clevo_m720_unsol_event,
-		.init_hook = alc883_clevo_m720_automute,
+		.init_hook = alc883_clevo_m720_init_hook,
 	},
 	[ALC883_LENOVO_101E_2ch] = {
 		.mixers = { alc883_lenovo_101e_2ch_mixer},
@@ -8978,8 +9342,8 @@
 		.channel_mode = alc883_3ST_2ch_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_lenovo_nb0763_capture_source,
-		.unsol_event = alc883_medion_md2_unsol_event,
-		.init_hook = alc883_medion_md2_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_medion_md2_init_hook,
 	},
 	[ALC888_LENOVO_MS7195_DIG] = {
 		.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
@@ -9003,8 +9367,8 @@
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_haier_w66_unsol_event,
-		.init_hook = alc883_haier_w66_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_haier_w66_init_hook,
 	},
 	[ALC888_3ST_HP] = {
 		.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
@@ -9015,8 +9379,8 @@
 		.channel_mode = alc888_3st_hp_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc888_3st_hp_unsol_event,
-		.init_hook = alc888_3st_hp_front_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_3st_hp_init_hook,
 	},
 	[ALC888_6ST_DELL] = {
 		.mixers = { alc883_base_mixer, alc883_chmode_mixer },
@@ -9028,8 +9392,8 @@
 		.num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
 		.channel_mode = alc883_sixstack_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc888_6st_dell_unsol_event,
-		.init_hook = alc888_6st_dell_front_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_6st_dell_init_hook,
 	},
 	[ALC883_MITAC] = {
 		.mixers = { alc883_mitac_mixer },
@@ -9039,8 +9403,8 @@
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_mitac_unsol_event,
-		.init_hook = alc883_mitac_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_mitac_init_hook,
 	},
 	[ALC883_FUJITSU_PI2515] = {
 		.mixers = { alc883_2ch_fujitsu_pi2515_mixer },
@@ -9052,8 +9416,8 @@
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_fujitsu_pi2515_capture_source,
-		.unsol_event = alc883_2ch_fujitsu_pi2515_unsol_event,
-		.init_hook = alc883_2ch_fujitsu_pi2515_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_2ch_fujitsu_pi2515_init_hook,
 	},
 	[ALC888_FUJITSU_XA3530] = {
 		.mixers = { alc888_base_mixer, alc883_chmode_mixer },
@@ -9070,8 +9434,8 @@
 		.num_mux_defs =
 			ARRAY_SIZE(alc888_2_capture_sources),
 		.input_mux = alc888_2_capture_sources,
-		.unsol_event = alc888_fujitsu_xa3530_unsol_event,
-		.init_hook = alc888_fujitsu_xa3530_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_fujitsu_xa3530_init_hook,
 	},
 	[ALC888_LENOVO_SKY] = {
 		.mixers = { alc888_lenovo_sky_mixer, alc883_chmode_mixer },
@@ -9083,8 +9447,8 @@
 		.channel_mode = alc883_sixstack_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_lenovo_sky_capture_source,
-		.unsol_event = alc883_lenovo_sky_unsol_event,
-		.init_hook = alc888_lenovo_sky_front_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_lenovo_sky_init_hook,
 	},
 	[ALC888_ASUS_M90V] = {
 		.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
@@ -9112,7 +9476,7 @@
 		.channel_mode = alc883_3ST_2ch_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_asus_eee1601_capture_source,
-		.unsol_event = alc883_eee1601_unsol_event,
+		.unsol_event = alc_sku_unsol_event,
 		.init_hook = alc883_eee1601_inithook,
 	},
 	[ALC1200_ASUS_P5Q] = {
@@ -9127,6 +9491,32 @@
 		.channel_mode = alc883_sixstack_modes,
 		.input_mux = &alc883_capture_source,
 	},
+	[ALC889A_MB31] = {
+		.mixers = { alc889A_mb31_mixer, alc883_chmode_mixer},
+		.init_verbs = { alc883_init_verbs, alc889A_mb31_verbs,
+			alc880_gpio1_init_verbs },
+		.adc_nids = alc883_adc_nids,
+		.num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.channel_mode = alc889A_mb31_6ch_modes,
+		.num_channel_mode = ARRAY_SIZE(alc889A_mb31_6ch_modes),
+		.input_mux = &alc889A_mb31_capture_source,
+		.dig_out_nid = ALC883_DIGOUT_NID,
+		.unsol_event = alc889A_mb31_unsol_event,
+		.init_hook = alc889A_mb31_automute,
+	},
+	[ALC883_SONY_VAIO_TT] = {
+		.mixers = { alc883_vaiott_mixer },
+		.init_verbs = { alc883_init_verbs, alc883_vaiott_verbs },
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
+		.channel_mode = alc883_3ST_2ch_modes,
+		.input_mux = &alc883_capture_source,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_vaiott_init_hook,
+	},
 };
 
 
@@ -9155,7 +9545,6 @@
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -9273,10 +9662,18 @@
 	board_config = snd_hda_check_board_config(codec, ALC883_MODEL_LAST,
 						  alc883_models,
 						  alc883_cfg_tbl);
-	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC883, "
-		       "trying auto-probe from BIOS...\n");
-		board_config = ALC883_AUTO;
+	if (board_config < 0 || board_config >= ALC883_MODEL_LAST) {
+		/* Pick up systems that don't supply PCI SSID */
+		switch (codec->subsystem_id) {
+		case 0x106b3600: /* Macbook 3.1 */
+			board_config = ALC889A_MB31;
+			break;
+		default:
+			printk(KERN_INFO
+				"hda_codec: Unknown model for %s, trying "
+				"auto-probe from BIOS...\n", codec->chip_name);
+			board_config = ALC883_AUTO;
+		}
 	}
 
 	if (board_config == ALC883_AUTO) {
@@ -9304,13 +9701,6 @@
 
 	switch (codec->vendor_id) {
 	case 0x10ec0888:
-		if (codec->revision_id == 0x100101) {
-			spec->stream_name_analog = "ALC1200 Analog";
-			spec->stream_name_digital = "ALC1200 Digital";
-		} else {
-			spec->stream_name_analog = "ALC888 Analog";
-			spec->stream_name_digital = "ALC888 Digital";
-		}
 		if (!spec->num_adc_nids) {
 			spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
 			spec->adc_nids = alc883_adc_nids;
@@ -9318,10 +9708,9 @@
 		if (!spec->capsrc_nids)
 			spec->capsrc_nids = alc883_capsrc_nids;
 		spec->capture_style = CAPT_MIX; /* matrix-style capture */
+		spec->init_amp = ALC_INIT_DEFAULT; /* always initialize */
 		break;
 	case 0x10ec0889:
-		spec->stream_name_analog = "ALC889 Analog";
-		spec->stream_name_digital = "ALC889 Digital";
 		if (!spec->num_adc_nids) {
 			spec->num_adc_nids = ARRAY_SIZE(alc889_adc_nids);
 			spec->adc_nids = alc889_adc_nids;
@@ -9332,8 +9721,6 @@
 							capture */
 		break;
 	default:
-		spec->stream_name_analog = "ALC883 Analog";
-		spec->stream_name_digital = "ALC883 Digital";
 		if (!spec->num_adc_nids) {
 			spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
 			spec->adc_nids = alc883_adc_nids;
@@ -9413,24 +9800,6 @@
 	{ } /* end */
 };
 
-static struct snd_kcontrol_new alc262_hippo1_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
-	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
-	/*HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),*/
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-	{ } /* end */
-};
-
 /* update HP, line and mono-out pins according to the master switch */
 static void alc262_hp_master_update(struct hda_codec *codec)
 {
@@ -9486,14 +9855,7 @@
 	alc262_hp_wildwest_automute(codec);
 }
 
-static int alc262_hp_master_sw_get(struct snd_kcontrol *kcontrol,
-				   struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct alc_spec *spec = codec->spec;
-	*ucontrol->value.integer.value = spec->master_sw;
-	return 0;
-}
+#define alc262_hp_master_sw_get		alc260_hp_master_sw_get
 
 static int alc262_hp_master_sw_put(struct snd_kcontrol *kcontrol,
 				   struct snd_ctl_elem_value *ucontrol)
@@ -9509,14 +9871,17 @@
 	return 1;
 }
 
+#define ALC262_HP_MASTER_SWITCH					\
+	{							\
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		\
+		.name = "Master Playback Switch",		\
+		.info = snd_ctl_boolean_mono_info,		\
+		.get = alc262_hp_master_sw_get,			\
+		.put = alc262_hp_master_sw_put,			\
+	}
+
 static struct snd_kcontrol_new alc262_HP_BPC_mixer[] = {
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_ctl_boolean_mono_info,
-		.get = alc262_hp_master_sw_get,
-		.put = alc262_hp_master_sw_put,
-	},
+	ALC262_HP_MASTER_SWITCH,
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
@@ -9540,13 +9905,7 @@
 };
 
 static struct snd_kcontrol_new alc262_HP_BPC_WildWest_mixer[] = {
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_ctl_boolean_mono_info,
-		.get = alc262_hp_master_sw_get,
-		.put = alc262_hp_master_sw_put,
-	},
+	ALC262_HP_MASTER_SWITCH,
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
@@ -9573,32 +9932,13 @@
 };
 
 /* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc262_hp_t5735_automute(struct hda_codec *codec, int force)
+static void alc262_hp_t5735_init_hook(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
 
-	if (force || !spec->sense_updated) {
-		unsigned int present;
-		present = snd_hda_codec_read(codec, 0x15, 0,
-					     AC_VERB_GET_PIN_SENSE, 0);
-		spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
-		spec->sense_updated = 1;
-	}
-	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_OUTPUT, 0, HDA_AMP_MUTE,
-				 spec->jack_present ? HDA_AMP_MUTE : 0);
-}
-
-static void alc262_hp_t5735_unsol_event(struct hda_codec *codec,
-					unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc262_hp_t5735_automute(codec, 1);
-}
-
-static void alc262_hp_t5735_init_hook(struct hda_codec *codec)
-{
-	alc262_hp_t5735_automute(codec, 1);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x0c; /* HACK: not actually a pin */
+	alc_automute_amp(codec);
 }
 
 static struct snd_kcontrol_new alc262_hp_t5735_mixer[] = {
@@ -9651,46 +9991,132 @@
 	},
 };
 
-/* bind hp and internal speaker mute (with plug check) */
-static int alc262_sony_master_sw_put(struct snd_kcontrol *kcontrol,
-				     struct snd_ctl_elem_value *ucontrol)
+/* bind hp and internal speaker mute (with plug check) as master switch */
+static void alc262_hippo_master_update(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t hp_nid = spec->autocfg.hp_pins[0];
+	hda_nid_t line_nid = spec->autocfg.line_out_pins[0];
+	hda_nid_t speaker_nid = spec->autocfg.speaker_pins[0];
+	unsigned int mute;
+
+	/* HP */
+	mute = spec->master_sw ? 0 : HDA_AMP_MUTE;
+	snd_hda_codec_amp_stereo(codec, hp_nid, HDA_OUTPUT, 0,
+				 HDA_AMP_MUTE, mute);
+	/* mute internal speaker per jack sense */
+	if (spec->jack_present)
+		mute = HDA_AMP_MUTE;
+	if (line_nid)
+		snd_hda_codec_amp_stereo(codec, line_nid, HDA_OUTPUT, 0,
+					 HDA_AMP_MUTE, mute);
+	if (speaker_nid && speaker_nid != line_nid)
+		snd_hda_codec_amp_stereo(codec, speaker_nid, HDA_OUTPUT, 0,
+					 HDA_AMP_MUTE, mute);
+}
+
+#define alc262_hippo_master_sw_get	alc262_hp_master_sw_get
+
+static int alc262_hippo_master_sw_put(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	long *valp = ucontrol->value.integer.value;
-	int change;
+	struct alc_spec *spec = codec->spec;
+	int val = !!*ucontrol->value.integer.value;
 
-	/* change hp mute */
-	change = snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0,
-					  HDA_AMP_MUTE,
-					  valp[0] ? 0 : HDA_AMP_MUTE);
-	change |= snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0,
-					   HDA_AMP_MUTE,
-					   valp[1] ? 0 : HDA_AMP_MUTE);
-	if (change) {
-		/* change speaker according to HP jack state */
-		struct alc_spec *spec = codec->spec;
-		unsigned int mute;
-		if (spec->jack_present)
-			mute = HDA_AMP_MUTE;
-		else
-			mute = snd_hda_codec_amp_read(codec, 0x15, 0,
-						      HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
-	return change;
+	if (val == spec->master_sw)
+		return 0;
+	spec->master_sw = val;
+	alc262_hippo_master_update(codec);
+	return 1;
 }
 
+#define ALC262_HIPPO_MASTER_SWITCH				\
+	{							\
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		\
+		.name = "Master Playback Switch",		\
+		.info = snd_ctl_boolean_mono_info,		\
+		.get = alc262_hippo_master_sw_get,		\
+		.put = alc262_hippo_master_sw_put,		\
+	}
+
+static struct snd_kcontrol_new alc262_hippo_mixer[] = {
+	ALC262_HIPPO_MASTER_SWITCH,
+	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+	{ } /* end */
+};
+
+static struct snd_kcontrol_new alc262_hippo1_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
+	{ } /* end */
+};
+
+/* mute/unmute internal speaker according to the hp jack and mute state */
+static void alc262_hippo_automute(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t hp_nid = spec->autocfg.hp_pins[0];
+	unsigned int present;
+
+	/* need to execute and sync at first */
+	snd_hda_codec_read(codec, hp_nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+	present = snd_hda_codec_read(codec, hp_nid, 0,
+				     AC_VERB_GET_PIN_SENSE, 0);
+	spec->jack_present = (present & 0x80000000) != 0;
+	alc262_hippo_master_update(codec);
+}
+
+static void alc262_hippo_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+	if ((res >> 26) != ALC880_HP_EVENT)
+		return;
+	alc262_hippo_automute(codec);
+}
+
+static void alc262_hippo_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc262_hippo_automute(codec);
+}
+
+static void alc262_hippo1_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc262_hippo_automute(codec);
+}
+
+
 static struct snd_kcontrol_new alc262_sony_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_hda_mixer_amp_switch_info,
-		.get = snd_hda_mixer_amp_switch_get,
-		.put = alc262_sony_master_sw_put,
-		.private_value = HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
-	},
+	ALC262_HIPPO_MASTER_SWITCH,
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
@@ -9699,8 +10125,8 @@
 };
 
 static struct snd_kcontrol_new alc262_benq_t31_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
@@ -9741,34 +10167,15 @@
 };
 
 /* unsolicited event for HP jack sensing */
-static void alc262_tyan_automute(struct hda_codec *codec)
+static void alc262_tyan_init_hook(struct hda_codec *codec)
 {
-	unsigned int mute;
-	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
-	snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present = (present & 0x80000000) != 0;
-	if (present) {
-		/* mute line output on ATX panel */
-		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute line output if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	alc_automute_amp(codec);
 }
 
-static void alc262_tyan_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc262_tyan_automute(codec);
-}
 
 #define alc262_capture_mixer		alc882_capture_mixer
 #define alc262_capture_alt_mixer	alc882_capture_alt_mixer
@@ -9923,99 +10330,25 @@
 				AC_VERB_SET_CONNECT_SEL, present ? 0x0 : 0x09);
 }
 
-/* toggle speaker-output according to the hp-jack state */
-static void alc262_toshiba_s06_speaker_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x15, 0,
-					AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? 0 : PIN_OUT;
-	snd_hda_codec_write(codec, 0x14, 0,
-					AC_VERB_SET_PIN_WIDGET_CONTROL, bits);
-}
-
-
 
 /* unsolicited event for HP jack sensing */
 static void alc262_toshiba_s06_unsol_event(struct hda_codec *codec,
 				       unsigned int res)
 {
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc262_toshiba_s06_speaker_automute(codec);
 	if ((res >> 26) == ALC880_MIC_EVENT)
 		alc262_dmic_automute(codec);
-
+	else
+		alc_sku_unsol_event(codec, res);
 }
 
 static void alc262_toshiba_s06_init_hook(struct hda_codec *codec)
 {
-	alc262_toshiba_s06_speaker_automute(codec);
-	alc262_dmic_automute(codec);
-}
-
-/* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc262_hippo_automute(struct hda_codec *codec)
-{
 	struct alc_spec *spec = codec->spec;
-	unsigned int mute;
-	unsigned int present;
 
-	/* need to execute and sync at first */
-	snd_hda_codec_read(codec, 0x15, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = (present & 0x80000000) != 0;
-	if (spec->jack_present) {
-		/* mute internal speaker */
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute internal speaker if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x15, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
-}
-
-/* unsolicited event for HP jack sensing */
-static void alc262_hippo_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc262_hippo_automute(codec);
-}
-
-static void alc262_hippo1_automute(struct hda_codec *codec)
-{
-	unsigned int mute;
-	unsigned int present;
-
-	snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present = (present & 0x80000000) != 0;
-	if (present) {
-		/* mute internal speaker */
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute internal speaker if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
-}
-
-/* unsolicited event for HP jack sensing */
-static void alc262_hippo1_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc262_hippo1_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_pin(codec);
+	alc262_dmic_automute(codec);
 }
 
 /*
@@ -10285,14 +10618,7 @@
 
 static struct snd_kcontrol_new alc262_toshiba_rx1_mixer[] = {
 	HDA_BIND_VOL("Master Playback Volume", &alc262_fujitsu_bind_master_vol),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_hda_mixer_amp_switch_info,
-		.get = snd_hda_mixer_amp_switch_get,
-		.put = alc262_sony_master_sw_put,
-		.private_value = HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
-	},
+	ALC262_HIPPO_MASTER_SWITCH,
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
@@ -10639,31 +10965,46 @@
 	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
 	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
 
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 },
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
 	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
         {0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 },
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
 	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
 	{0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
 
 
 	/* FIXME: use matrix-type input source selection */
-	/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
-	/* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+	/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 0b, 12 */
+	/* Input mixer1: only unmute Mic */
 	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))},
 	/* Input mixer2 */
 	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))},
 	/* Input mixer3 */
 	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))},
 
 	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
 
@@ -10843,6 +11184,8 @@
 	if (err < 0)
 		return err;
 
+	alc_ssid_check(codec, 0x15, 0x14, 0x1b);
+
 	return 1;
 }
 
@@ -10945,7 +11288,7 @@
 		.input_mux = &alc262_capture_source,
 	},
 	[ALC262_HIPPO] = {
-		.mixers = { alc262_base_mixer },
+		.mixers = { alc262_hippo_mixer },
 		.init_verbs = { alc262_init_verbs, alc262_hippo_unsol_verbs},
 		.num_dacs = ARRAY_SIZE(alc262_dac_nids),
 		.dac_nids = alc262_dac_nids,
@@ -10955,7 +11298,7 @@
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
 		.unsol_event = alc262_hippo_unsol_event,
-		.init_hook = alc262_hippo_automute,
+		.init_hook = alc262_hippo_init_hook,
 	},
 	[ALC262_HIPPO_1] = {
 		.mixers = { alc262_hippo1_mixer },
@@ -10967,8 +11310,8 @@
 		.num_channel_mode = ARRAY_SIZE(alc262_modes),
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
-		.unsol_event = alc262_hippo1_unsol_event,
-		.init_hook = alc262_hippo1_automute,
+		.unsol_event = alc262_hippo_unsol_event,
+		.init_hook = alc262_hippo1_init_hook,
 	},
 	[ALC262_FUJITSU] = {
 		.mixers = { alc262_fujitsu_mixer },
@@ -11030,7 +11373,7 @@
 		.num_channel_mode = ARRAY_SIZE(alc262_modes),
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
-		.unsol_event = alc262_hp_t5735_unsol_event,
+		.unsol_event = alc_automute_amp_unsol_event,
 		.init_hook = alc262_hp_t5735_init_hook,
 	},
 	[ALC262_HP_RP5700] = {
@@ -11062,7 +11405,7 @@
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
 		.unsol_event = alc262_hippo_unsol_event,
-		.init_hook = alc262_hippo_automute,
+		.init_hook = alc262_hippo_init_hook,
 	},
 	[ALC262_BENQ_T31] = {
 		.mixers = { alc262_benq_t31_mixer },
@@ -11074,7 +11417,7 @@
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
 		.unsol_event = alc262_hippo_unsol_event,
-		.init_hook = alc262_hippo_automute,
+		.init_hook = alc262_hippo_init_hook,
 	},
 	[ALC262_ULTRA] = {
 		.mixers = { alc262_ultra_mixer },
@@ -11139,7 +11482,7 @@
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
 		.unsol_event = alc262_hippo_unsol_event,
-		.init_hook = alc262_hippo_automute,
+		.init_hook = alc262_hippo_init_hook,
 	},
 	[ALC262_TYAN] = {
 		.mixers = { alc262_tyan_mixer },
@@ -11151,8 +11494,8 @@
 		.num_channel_mode = ARRAY_SIZE(alc262_modes),
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
-		.unsol_event = alc262_tyan_unsol_event,
-		.init_hook = alc262_tyan_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc262_tyan_init_hook,
 	},
 };
 
@@ -11187,8 +11530,8 @@
 						  alc262_cfg_tbl);
 
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC262, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC262_AUTO;
 	}
 
@@ -11217,11 +11560,9 @@
 	if (board_config != ALC262_AUTO)
 		setup_preset(spec, &alc262_presets[board_config]);
 
-	spec->stream_name_analog = "ALC262 Analog";
 	spec->stream_analog_playback = &alc262_pcm_analog_playback;
 	spec->stream_analog_capture = &alc262_pcm_analog_capture;
 
-	spec->stream_name_digital = "ALC262 Digital";
 	spec->stream_digital_playback = &alc262_pcm_digital_playback;
 	spec->stream_digital_capture = &alc262_pcm_digital_capture;
 
@@ -11296,6 +11637,17 @@
 	{ }
 };
 
+static struct snd_kcontrol_new alc268_toshiba_mixer[] = {
+	/* output mixer control */
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x3, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line In Boost", 0x1a, 0, HDA_INPUT),
+	{ }
+};
+
 /* bind Beep switches of both NID 0x0f and 0x10 */
 static struct hda_bind_ctls alc268_bind_beep_sw = {
 	.ops = &snd_hda_bind_sw,
@@ -11319,8 +11671,6 @@
 };
 
 /* Toshiba specific */
-#define alc268_toshiba_automute	alc262_hippo_automute
-
 static struct hda_verb alc268_toshiba_verbs[] = {
 	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
 	{ } /* end */
@@ -11456,13 +11806,8 @@
 };
 
 /* unsolicited event for HP jack sensing */
-static void alc268_toshiba_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc268_toshiba_automute(codec);
-}
+#define alc268_toshiba_unsol_event	alc262_hippo_unsol_event
+#define alc268_toshiba_init_hook	alc262_hippo_init_hook
 
 static void alc268_acer_unsol_event(struct hda_codec *codec,
 				       unsigned int res)
@@ -11537,30 +11882,15 @@
 };
 
 /* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc268_dell_automute(struct hda_codec *codec)
+static void alc268_dell_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned int mute;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0);
-	if (present & 0x80000000)
-		mute = HDA_AMP_MUTE;
-	else
-		mute = snd_hda_codec_amp_read(codec, 0x15, 0, HDA_OUTPUT, 0);
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, mute);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_pin(codec);
 }
 
-static void alc268_dell_unsol_event(struct hda_codec *codec,
-				    unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc268_dell_automute(codec);
-}
-
-#define alc268_dell_init_hook	alc268_dell_automute
-
 static struct snd_kcontrol_new alc267_quanta_il1_mixer[] = {
 	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x2, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
@@ -11579,16 +11909,6 @@
 	{ }
 };
 
-static void alc267_quanta_il1_hp_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-
-	present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    present ? 0 : PIN_OUT);
-}
-
 static void alc267_quanta_il1_mic_automute(struct hda_codec *codec)
 {
 	unsigned int present;
@@ -11600,9 +11920,13 @@
 			    present ? 0x00 : 0x01);
 }
 
-static void alc267_quanta_il1_automute(struct hda_codec *codec)
+static void alc267_quanta_il1_init_hook(struct hda_codec *codec)
 {
-	alc267_quanta_il1_hp_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_pin(codec);
 	alc267_quanta_il1_mic_automute(codec);
 }
 
@@ -11610,12 +11934,12 @@
 					   unsigned int res)
 {
 	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc267_quanta_il1_hp_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc267_quanta_il1_mic_automute(codec);
 		break;
+	default:
+		alc_sku_unsol_event(codec, res);
+		break;
 	}
 }
 
@@ -12063,16 +12387,16 @@
 						ALC268_ACER_ASPIRE_ONE),
 	SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
 	SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL),
-	SND_PCI_QUIRK(0x103c, 0x30cc, "TOSHIBA", ALC268_TOSHIBA),
-	SND_PCI_QUIRK(0x103c, 0x30f1, "HP TX25xx series", ALC268_TOSHIBA),
+	SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3000, "HP TX25xx series",
+			   ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
-	SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA),
-	SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA),
-	SND_PCI_QUIRK(0x1179, 0xff64, "TOSHIBA L305", ALC268_TOSHIBA),
+	SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
+	SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05",
+			   ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
 	SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
-	SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
+	SND_PCI_QUIRK(0x1854, 0x1775, "LG R510", ALC268_DELL),
 	{}
 };
 
@@ -12090,7 +12414,7 @@
 		.channel_mode = alc268_modes,
 		.input_mux = &alc268_capture_source,
 		.unsol_event = alc267_quanta_il1_unsol_event,
-		.init_hook = alc267_quanta_il1_automute,
+		.init_hook = alc267_quanta_il1_init_hook,
 	},
 	[ALC268_3ST] = {
 		.mixers = { alc268_base_mixer, alc268_capture_alt_mixer,
@@ -12108,7 +12432,7 @@
 		.input_mux = &alc268_capture_source,
 	},
 	[ALC268_TOSHIBA] = {
-		.mixers = { alc268_base_mixer, alc268_capture_alt_mixer,
+		.mixers = { alc268_toshiba_mixer, alc268_capture_alt_mixer,
 			    alc268_beep_mixer },
 		.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
 				alc268_toshiba_verbs },
@@ -12122,7 +12446,7 @@
 		.channel_mode = alc268_modes,
 		.input_mux = &alc268_capture_source,
 		.unsol_event = alc268_toshiba_unsol_event,
-		.init_hook = alc268_toshiba_automute,
+		.init_hook = alc268_toshiba_init_hook,
 	},
 	[ALC268_ACER] = {
 		.mixers = { alc268_acer_mixer, alc268_capture_alt_mixer,
@@ -12185,7 +12509,7 @@
 		.hp_nid = 0x02,
 		.num_channel_mode = ARRAY_SIZE(alc268_modes),
 		.channel_mode = alc268_modes,
-		.unsol_event = alc268_dell_unsol_event,
+		.unsol_event = alc_sku_unsol_event,
 		.init_hook = alc268_dell_init_hook,
 		.input_mux = &alc268_capture_source,
 	},
@@ -12205,7 +12529,7 @@
 		.channel_mode = alc268_modes,
 		.input_mux = &alc268_capture_source,
 		.unsol_event = alc268_toshiba_unsol_event,
-		.init_hook = alc268_toshiba_automute
+		.init_hook = alc268_toshiba_init_hook
 	},
 #ifdef CONFIG_SND_DEBUG
 	[ALC268_TEST] = {
@@ -12243,8 +12567,8 @@
 						  alc268_cfg_tbl);
 
 	if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC268, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC268_AUTO;
 	}
 
@@ -12265,14 +12589,6 @@
 	if (board_config != ALC268_AUTO)
 		setup_preset(spec, &alc268_presets[board_config]);
 
-	if (codec->vendor_id == 0x10ec0267) {
-		spec->stream_name_analog = "ALC267 Analog";
-		spec->stream_name_digital = "ALC267 Digital";
-	} else {
-		spec->stream_name_analog = "ALC268 Analog";
-		spec->stream_name_digital = "ALC268 Digital";
-	}
-
 	spec->stream_analog_playback = &alc268_pcm_analog_playback;
 	spec->stream_analog_capture = &alc268_pcm_analog_capture;
 	spec->stream_analog_alt_capture = &alc268_pcm_analog_alt_capture;
@@ -13099,8 +13415,8 @@
 						  alc269_cfg_tbl);
 
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC269, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC269_AUTO;
 	}
 
@@ -13127,7 +13443,6 @@
 	if (board_config != ALC269_AUTO)
 		setup_preset(spec, &alc269_presets[board_config]);
 
-	spec->stream_name_analog = "ALC269 Analog";
 	if (codec->subsystem_id == 0x17aa3bf8) {
 		/* Due to a hardware problem on Lenovo Ideadpad, we need to
 		 * fix the sample rate of analog I/O to 44.1kHz
@@ -13138,7 +13453,6 @@
 		spec->stream_analog_playback = &alc269_pcm_analog_playback;
 		spec->stream_analog_capture = &alc269_pcm_analog_capture;
 	}
-	spec->stream_name_digital = "ALC269 Digital";
 	spec->stream_digital_playback = &alc269_pcm_digital_playback;
 	spec->stream_digital_capture = &alc269_pcm_digital_capture;
 
@@ -13927,7 +14241,6 @@
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x0e, 0x0f, 0x0b);
 	for (i = 0; i < spec->autocfg.line_outs; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -14010,6 +14323,8 @@
 	spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids);
 	set_capture_mixer(spec);
 
+	alc_ssid_check(codec, 0x0e, 0x0f, 0x0b);
+
 	return 1;
 }
 
@@ -14199,8 +14514,8 @@
 						  alc861_cfg_tbl);
 
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC861, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC861_AUTO;
 	}
 
@@ -14227,11 +14542,9 @@
 	if (board_config != ALC861_AUTO)
 		setup_preset(spec, &alc861_presets[board_config]);
 
-	spec->stream_name_analog = "ALC861 Analog";
 	spec->stream_analog_playback = &alc861_pcm_analog_playback;
 	spec->stream_analog_capture = &alc861_pcm_analog_capture;
 
-	spec->stream_name_digital = "ALC861 Digital";
 	spec->stream_digital_playback = &alc861_pcm_digital_playback;
 	spec->stream_digital_capture = &alc861_pcm_digital_capture;
 
@@ -14618,19 +14931,6 @@
 	{}
 };
 
-/* toggle speaker-output according to the hp-jack state */
-static void alc861vd_lenovo_hp_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
-
 static void alc861vd_lenovo_mic_automute(struct hda_codec *codec)
 {
 	unsigned int present;
@@ -14643,9 +14943,13 @@
 				 HDA_AMP_MUTE, bits);
 }
 
-static void alc861vd_lenovo_automute(struct hda_codec *codec)
+static void alc861vd_lenovo_init_hook(struct hda_codec *codec)
 {
-	alc861vd_lenovo_hp_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 	alc861vd_lenovo_mic_automute(codec);
 }
 
@@ -14653,12 +14957,12 @@
 					unsigned int res)
 {
 	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc861vd_lenovo_hp_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc861vd_lenovo_mic_automute(codec);
 		break;
+	default:
+		alc_automute_amp_unsol_event(codec, res);
+		break;
 	}
 }
 
@@ -14708,20 +15012,13 @@
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc861vd_dallas_automute(struct hda_codec *codec)
+static void alc861vd_dallas_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
-
-static void alc861vd_dallas_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc861vd_dallas_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
@@ -14835,7 +15132,7 @@
 		.channel_mode = alc861vd_3stack_2ch_modes,
 		.input_mux = &alc861vd_capture_source,
 		.unsol_event = alc861vd_lenovo_unsol_event,
-		.init_hook = alc861vd_lenovo_automute,
+		.init_hook = alc861vd_lenovo_init_hook,
 	},
 	[ALC861VD_DALLAS] = {
 		.mixers = { alc861vd_dallas_mixer },
@@ -14845,8 +15142,8 @@
 		.num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
 		.channel_mode = alc861vd_3stack_2ch_modes,
 		.input_mux = &alc861vd_dallas_capture_source,
-		.unsol_event = alc861vd_dallas_unsol_event,
-		.init_hook = alc861vd_dallas_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc861vd_dallas_init_hook,
 	},
 	[ALC861VD_HP] = {
 		.mixers = { alc861vd_hp_mixer },
@@ -14857,8 +15154,8 @@
 		.num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
 		.channel_mode = alc861vd_3stack_2ch_modes,
 		.input_mux = &alc861vd_hp_capture_source,
-		.unsol_event = alc861vd_dallas_unsol_event,
-		.init_hook = alc861vd_dallas_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc861vd_dallas_init_hook,
 	},
 	[ALC660VD_ASUS_V1S] = {
 		.mixers = { alc861vd_lenovo_mixer },
@@ -14873,7 +15170,7 @@
 		.channel_mode = alc861vd_3stack_2ch_modes,
 		.input_mux = &alc861vd_capture_source,
 		.unsol_event = alc861vd_lenovo_unsol_event,
-		.init_hook = alc861vd_lenovo_automute,
+		.init_hook = alc861vd_lenovo_init_hook,
 	},
 };
 
@@ -14891,7 +15188,6 @@
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -15109,6 +15405,8 @@
 	if (err < 0)
 		return err;
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
@@ -15140,8 +15438,8 @@
 						  alc861vd_cfg_tbl);
 
 	if (board_config < 0 || board_config >= ALC861VD_MODEL_LAST) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC660VD/"
-			"ALC861VD, trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC861VD_AUTO;
 	}
 
@@ -15169,13 +15467,8 @@
 		setup_preset(spec, &alc861vd_presets[board_config]);
 
 	if (codec->vendor_id == 0x10ec0660) {
-		spec->stream_name_analog = "ALC660-VD Analog";
-		spec->stream_name_digital = "ALC660-VD Digital";
 		/* always turn on EAPD */
 		add_verb(spec, alc660vd_eapd_verbs);
-	} else {
-		spec->stream_name_analog = "ALC861VD Analog";
-		spec->stream_name_digital = "ALC861VD Digital";
 	}
 
 	spec->stream_analog_playback = &alc861vd_pcm_analog_playback;
@@ -15289,6 +15582,38 @@
 	},
 };
 
+#if 1 /* set to 0 for testing other input sources below */
+static struct hda_input_mux alc272_nc10_capture_source = {
+	.num_items = 2,
+	.items = {
+		{ "Autoselect Mic", 0x0 },
+		{ "Internal Mic", 0x1 },
+	},
+};
+#else
+static struct hda_input_mux alc272_nc10_capture_source = {
+	.num_items = 16,
+	.items = {
+		{ "Autoselect Mic", 0x0 },
+		{ "Internal Mic", 0x1 },
+		{ "In-0x02", 0x2 },
+		{ "In-0x03", 0x3 },
+		{ "In-0x04", 0x4 },
+		{ "In-0x05", 0x5 },
+		{ "In-0x06", 0x6 },
+		{ "In-0x07", 0x7 },
+		{ "In-0x08", 0x8 },
+		{ "In-0x09", 0x9 },
+		{ "In-0x0a", 0x0a },
+		{ "In-0x0b", 0x0b },
+		{ "In-0x0c", 0x0c },
+		{ "In-0x0d", 0x0d },
+		{ "In-0x0e", 0x0e },
+		{ "In-0x0f", 0x0f },
+	},
+};
+#endif
+
 /*
  * 2ch mode
  */
@@ -15428,10 +15753,8 @@
 };
 
 static struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = {
-	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-
-	HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Line-Out Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
 
 	HDA_CODEC_VOLUME("e-Mic Boost", 0x18, 0, HDA_INPUT),
 	HDA_CODEC_VOLUME("e-Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -15444,15 +15767,11 @@
 };
 
 static struct snd_kcontrol_new alc662_eeepc_ep20_mixer[] = {
-	HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Line-Out Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Surround Playback Switch", 0x03, 2, HDA_INPUT),
 	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x04, 2, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x04, 1, 2, HDA_INPUT),
-	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x04, 2, 2, HDA_INPUT),
-	HDA_CODEC_MUTE("Speaker Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("MuteCtrl Playback Switch", 0x0c, 2, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
 	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
@@ -15960,51 +16279,25 @@
 static void alc662_eeepc_unsol_event(struct hda_codec *codec,
 				     unsigned int res)
 {
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc262_hippo1_automute( codec );
-
 	if ((res >> 26) == ALC880_MIC_EVENT)
 		alc662_eeepc_mic_automute(codec);
+	else
+		alc262_hippo_unsol_event(codec, res);
 }
 
 static void alc662_eeepc_inithook(struct hda_codec *codec)
 {
-	alc262_hippo1_automute( codec );
+	alc262_hippo1_init_hook(codec);
 	alc662_eeepc_mic_automute(codec);
 }
 
-static void alc662_eeepc_ep20_automute(struct hda_codec *codec)
-{
-	unsigned int mute;
-	unsigned int present;
-
-	snd_hda_codec_read(codec, 0x14, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present = (present & 0x80000000) != 0;
-	if (present) {
-		/* mute internal speaker */
-		snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-					HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute internal speaker if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x14, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-					HDA_AMP_MUTE, mute);
-	}
-}
-
-/* unsolicited event for HP jack sensing */
-static void alc662_eeepc_ep20_unsol_event(struct hda_codec *codec,
-					  unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc662_eeepc_ep20_automute(codec);
-}
-
 static void alc662_eeepc_ep20_inithook(struct hda_codec *codec)
 {
-	alc662_eeepc_ep20_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x1b;
+	alc262_hippo_master_update(codec);
 }
 
 static void alc663_m51va_speaker_automute(struct hda_codec *codec)
@@ -16338,35 +16631,9 @@
 	alc662_eeepc_mic_automute(codec);
 }
 
-/* bind hp and internal speaker mute (with plug check) */
-static int alc662_ecs_master_sw_put(struct snd_kcontrol *kcontrol,
-				     struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	long *valp = ucontrol->value.integer.value;
-	int change;
-
-	change = snd_hda_codec_amp_update(codec, 0x1b, 0, HDA_OUTPUT, 0,
-					  HDA_AMP_MUTE,
-					  valp[0] ? 0 : HDA_AMP_MUTE);
-	change |= snd_hda_codec_amp_update(codec, 0x1b, 1, HDA_OUTPUT, 0,
-					   HDA_AMP_MUTE,
-					   valp[1] ? 0 : HDA_AMP_MUTE);
-	if (change)
-		alc262_hippo1_automute(codec);
-	return change;
-}
-
 static struct snd_kcontrol_new alc662_ecs_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_hda_mixer_amp_switch_info,
-		.get = snd_hda_mixer_amp_switch_get,
-		.put = alc662_ecs_master_sw_put,
-		.private_value = HDA_COMPOSE_AMP_VAL(0x1b, 3, 0, HDA_OUTPUT),
-	},
+	ALC262_HIPPO_MASTER_SWITCH,
 
 	HDA_CODEC_VOLUME("e-Mic/LineIn Boost", 0x18, 0, HDA_INPUT),
 	HDA_CODEC_VOLUME("e-Mic/LineIn Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -16378,6 +16645,23 @@
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc272_nc10_mixer[] = {
+	/* Master Playback automatically created from Speaker and Headphone */
+	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT),
+
+	HDA_CODEC_VOLUME("Ext Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Ext Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Ext Mic Boost", 0x18, 0, HDA_INPUT),
+
+	HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT),
+	{ } /* end */
+};
+
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 #define alc662_loopbacks	alc880_loopbacks
 #endif
@@ -16411,6 +16695,9 @@
 	[ALC663_ASUS_MODE4] = "asus-mode4",
 	[ALC663_ASUS_MODE5] = "asus-mode5",
 	[ALC663_ASUS_MODE6] = "asus-mode6",
+	[ALC272_DELL]		= "dell",
+	[ALC272_DELL_ZM1]	= "dell-zm1",
+	[ALC272_SAMSUNG_NC10]	= "samsung-nc10",
 	[ALC662_AUTO]		= "auto",
 };
 
@@ -16468,6 +16755,7 @@
 	SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
 	SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
 		      ALC662_3ST_6ch_DIG),
+	SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
 		      ALC662_3ST_6ch_DIG),
 	SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
@@ -16558,7 +16846,7 @@
 		.num_channel_mode = ARRAY_SIZE(alc662_3ST_6ch_modes),
 		.channel_mode = alc662_3ST_6ch_modes,
 		.input_mux = &alc662_lenovo_101e_capture_source,
-		.unsol_event = alc662_eeepc_ep20_unsol_event,
+		.unsol_event = alc662_eeepc_unsol_event,
 		.init_hook = alc662_eeepc_ep20_inithook,
 	},
 	[ALC662_ECS] = {
@@ -16739,6 +17027,18 @@
 		.unsol_event = alc663_m51va_unsol_event,
 		.init_hook = alc663_m51va_inithook,
 	},
+	[ALC272_SAMSUNG_NC10] = {
+		.mixers = { alc272_nc10_mixer },
+		.init_verbs = { alc662_init_verbs,
+				alc663_21jd_amic_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc272_dac_nids),
+		.dac_nids = alc272_dac_nids,
+		.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+		.channel_mode = alc662_3ST_2ch_modes,
+		.input_mux = &alc272_nc10_capture_source,
+		.unsol_event = alc663_mode4_unsol_event,
+		.init_hook = alc663_mode4_inithook,
+	},
 };
 
 
@@ -16933,7 +17233,6 @@
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -17030,6 +17329,8 @@
 	if (err < 0)
 		return err;
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
@@ -17062,8 +17363,8 @@
 						  alc662_models,
 			  	                  alc662_cfg_tbl);
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC662, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC662_AUTO;
 	}
 
@@ -17090,17 +17391,6 @@
 	if (board_config != ALC662_AUTO)
 		setup_preset(spec, &alc662_presets[board_config]);
 
-	if (codec->vendor_id == 0x10ec0663) {
-		spec->stream_name_analog = "ALC663 Analog";
-		spec->stream_name_digital = "ALC663 Digital";
-	} else if (codec->vendor_id == 0x10ec0272) {
-		spec->stream_name_analog = "ALC272 Analog";
-		spec->stream_name_digital = "ALC272 Digital";
-	} else {
-		spec->stream_name_analog = "ALC662 Analog";
-		spec->stream_name_digital = "ALC662 Digital";
-	}
-
 	spec->stream_analog_playback = &alc662_pcm_analog_playback;
 	spec->stream_analog_capture = &alc662_pcm_analog_capture;
 
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index d2fd8ef..93e47c9 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -100,6 +100,7 @@
 	STAC_HP_M4,
 	STAC_HP_DV5,
 	STAC_HP_HDX,
+	STAC_HP_DV4_1222NR,
 	STAC_92HD71BXX_MODELS
 };
 
@@ -193,6 +194,7 @@
 	unsigned int gpio_dir;
 	unsigned int gpio_data;
 	unsigned int gpio_mute;
+	unsigned int gpio_led;
 
 	/* stream */
 	unsigned int stream_delay;
@@ -634,6 +636,40 @@
 	return 0;
 }
 
+static unsigned int stac92xx_vref_set(struct hda_codec *codec,
+					hda_nid_t nid, unsigned int new_vref)
+{
+	unsigned int error;
+	unsigned int pincfg;
+	pincfg = snd_hda_codec_read(codec, nid, 0,
+				AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+
+	pincfg &= 0xff;
+	pincfg &= ~(AC_PINCTL_VREFEN | AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN);
+	pincfg |= new_vref;
+
+	if (new_vref == AC_PINCTL_VREF_HIZ)
+		pincfg |= AC_PINCTL_OUT_EN;
+	else
+		pincfg |= AC_PINCTL_IN_EN;
+
+	error = snd_hda_codec_write_cache(codec, nid, 0,
+					AC_VERB_SET_PIN_WIDGET_CONTROL, pincfg);
+	if (error < 0)
+		return error;
+	else
+		return 1;
+}
+
+static unsigned int stac92xx_vref_get(struct hda_codec *codec, hda_nid_t nid)
+{
+	unsigned int vref;
+	vref = snd_hda_codec_read(codec, nid, 0,
+				AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+	vref &= AC_PINCTL_VREFEN;
+	return vref;
+}
+
 static int stac92xx_mux_enum_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
@@ -995,6 +1031,17 @@
 		.private_value = verb_read | (verb_write << 16), \
 	}
 
+#define DC_BIAS(xname, idx, nid) \
+	{ \
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+		.name = xname, \
+		.index = idx, \
+		.info = stac92xx_dc_bias_info, \
+		.get = stac92xx_dc_bias_get, \
+		.put = stac92xx_dc_bias_put, \
+		.private_value = nid, \
+	}
+
 static struct snd_kcontrol_new stac9200_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0xb, 0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Master Playback Switch", 0xb, 0, HDA_OUTPUT),
@@ -1543,6 +1590,8 @@
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xfb30,
+		      "SigmaTel",STAC_9205_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
 		      "DFI LanParty", STAC_REF),
 	/* Dell laptops have BIOS problem */
@@ -1837,6 +1886,7 @@
 	[STAC_HP_M4]		= NULL,
 	[STAC_HP_DV5]		= NULL,
 	[STAC_HP_HDX]           = NULL,
+	[STAC_HP_DV4_1222NR]	= NULL,
 };
 
 static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
@@ -1848,6 +1898,7 @@
 	[STAC_HP_M4] = "hp-m4",
 	[STAC_HP_DV5] = "hp-dv5",
 	[STAC_HP_HDX] = "hp-hdx",
+	[STAC_HP_DV4_1222NR] = "hp-dv4-1222nr",
 };
 
 static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
@@ -1856,6 +1907,8 @@
 		      "DFI LanParty", STAC_92HD71BXX_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
 		      "DFI LanParty", STAC_92HD71BXX_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb,
+		      "HP dv4-1222nr", STAC_HP_DV4_1222NR),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080,
 		      "HP", STAC_HP_DV5),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0,
@@ -2545,7 +2598,8 @@
 	return 0;
 }
 
-static unsigned int stac92xx_get_vref(struct hda_codec *codec, hda_nid_t nid)
+static unsigned int stac92xx_get_default_vref(struct hda_codec *codec,
+					hda_nid_t nid)
 {
 	unsigned int pincap = snd_hda_query_pin_caps(codec, nid);
 	pincap = (pincap & AC_PINCAP_VREF) >> AC_PINCAP_VREF_SHIFT;
@@ -2599,15 +2653,108 @@
 	return 1;
 }
 
-#define stac92xx_io_switch_info		snd_ctl_boolean_mono_info
+static int stac92xx_dc_bias_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *uinfo)
+{
+	int i;
+	static char *texts[] = {
+		"Mic In", "Line In", "Line Out"
+	};
+
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct sigmatel_spec *spec = codec->spec;
+	hda_nid_t nid = kcontrol->private_value;
+
+	if (nid == spec->mic_switch || nid == spec->line_switch)
+		i = 3;
+	else
+		i = 2;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->value.enumerated.items = i;
+	uinfo->count = 1;
+	if (uinfo->value.enumerated.item >= i)
+		uinfo->value.enumerated.item = i-1;
+	strcpy(uinfo->value.enumerated.name,
+		texts[uinfo->value.enumerated.item]);
+
+	return 0;
+}
+
+static int stac92xx_dc_bias_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	hda_nid_t nid = kcontrol->private_value;
+	unsigned int vref = stac92xx_vref_get(codec, nid);
+
+	if (vref == stac92xx_get_default_vref(codec, nid))
+		ucontrol->value.enumerated.item[0] = 0;
+	else if (vref == AC_PINCTL_VREF_GRD)
+		ucontrol->value.enumerated.item[0] = 1;
+	else if (vref == AC_PINCTL_VREF_HIZ)
+		ucontrol->value.enumerated.item[0] = 2;
+
+	return 0;
+}
+
+static int stac92xx_dc_bias_put(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int new_vref = 0;
+	unsigned int error;
+	hda_nid_t nid = kcontrol->private_value;
+
+	if (ucontrol->value.enumerated.item[0] == 0)
+		new_vref = stac92xx_get_default_vref(codec, nid);
+	else if (ucontrol->value.enumerated.item[0] == 1)
+		new_vref = AC_PINCTL_VREF_GRD;
+	else if (ucontrol->value.enumerated.item[0] == 2)
+		new_vref = AC_PINCTL_VREF_HIZ;
+	else
+		return 0;
+
+	if (new_vref != stac92xx_vref_get(codec, nid)) {
+		error = stac92xx_vref_set(codec, nid, new_vref);
+		return error;
+	}
+
+	return 0;
+}
+
+static int stac92xx_io_switch_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *uinfo)
+{
+	static char *texts[2];
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct sigmatel_spec *spec = codec->spec;
+
+	if (kcontrol->private_value == spec->line_switch)
+		texts[0] = "Line In";
+	else
+		texts[0] = "Mic In";
+	texts[1] = "Line Out";
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->value.enumerated.items = 2;
+	uinfo->count = 1;
+
+	if (uinfo->value.enumerated.item >= 2)
+		uinfo->value.enumerated.item = 1;
+	strcpy(uinfo->value.enumerated.name,
+		texts[uinfo->value.enumerated.item]);
+
+	return 0;
+}
 
 static int stac92xx_io_switch_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct sigmatel_spec *spec = codec->spec;
-	int io_idx = kcontrol-> private_value & 0xff;
+	hda_nid_t nid = kcontrol->private_value;
+	int io_idx = (nid == spec->mic_switch) ? 1 : 0;
 
-	ucontrol->value.integer.value[0] = spec->io_switch[io_idx];
+	ucontrol->value.enumerated.item[0] = spec->io_switch[io_idx];
 	return 0;
 }
 
@@ -2615,9 +2762,9 @@
 {
         struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct sigmatel_spec *spec = codec->spec;
-        hda_nid_t nid = kcontrol->private_value >> 8;
-	int io_idx = kcontrol-> private_value & 0xff;
-	unsigned short val = !!ucontrol->value.integer.value[0];
+	hda_nid_t nid = kcontrol->private_value;
+	int io_idx = (nid == spec->mic_switch) ? 1 : 0;
+	unsigned short val = !!ucontrol->value.enumerated.item[0];
 
 	spec->io_switch[io_idx] = val;
 
@@ -2626,7 +2773,7 @@
 	else {
 		unsigned int pinctl = AC_PINCTL_IN_EN;
 		if (io_idx) /* set VREF for mic */
-			pinctl |= stac92xx_get_vref(codec, nid);
+			pinctl |= stac92xx_get_default_vref(codec, nid);
 		stac92xx_auto_set_pinctl(codec, nid, pinctl);
 	}
 
@@ -2707,7 +2854,8 @@
 	STAC_CTL_WIDGET_AMP_VOL,
 	STAC_CTL_WIDGET_HP_SWITCH,
 	STAC_CTL_WIDGET_IO_SWITCH,
-	STAC_CTL_WIDGET_CLFE_SWITCH
+	STAC_CTL_WIDGET_CLFE_SWITCH,
+	STAC_CTL_WIDGET_DC_BIAS
 };
 
 static struct snd_kcontrol_new stac92xx_control_templates[] = {
@@ -2719,6 +2867,7 @@
 	STAC_CODEC_HP_SWITCH(NULL),
 	STAC_CODEC_IO_SWITCH(NULL, 0),
 	STAC_CODEC_CLFE_SWITCH(NULL, 0),
+	DC_BIAS(NULL, 0, 0),
 };
 
 /* add dynamic controls */
@@ -2782,6 +2931,34 @@
 	.put = stac92xx_mux_enum_put,
 };
 
+static inline int stac92xx_add_jack_mode_control(struct hda_codec *codec,
+						hda_nid_t nid, int idx)
+{
+	int def_conf = snd_hda_codec_get_pincfg(codec, nid);
+	int control = 0;
+	struct sigmatel_spec *spec = codec->spec;
+	char name[22];
+
+	if (!((get_defcfg_connect(def_conf)) & AC_JACK_PORT_FIXED)) {
+		if (stac92xx_get_default_vref(codec, nid) == AC_PINCTL_VREF_GRD
+			&& nid == spec->line_switch)
+			control = STAC_CTL_WIDGET_IO_SWITCH;
+		else if (snd_hda_query_pin_caps(codec, nid)
+			& (AC_PINCAP_VREF_GRD << AC_PINCAP_VREF_SHIFT))
+			control = STAC_CTL_WIDGET_DC_BIAS;
+		else if (nid == spec->mic_switch)
+			control = STAC_CTL_WIDGET_IO_SWITCH;
+	}
+
+	if (control) {
+		strcpy(name, auto_pin_cfg_labels[idx]);
+		return stac92xx_add_control(codec->spec, control,
+					strcat(name, " Jack Mode"), nid);
+	}
+
+	return 0;
+}
+
 static int stac92xx_add_input_source(struct sigmatel_spec *spec)
 {
 	struct snd_kcontrol_new *knew;
@@ -3144,7 +3321,9 @@
 					       const struct auto_pin_cfg *cfg)
 {
 	struct sigmatel_spec *spec = codec->spec;
+	hda_nid_t nid;
 	int err;
+	int idx;
 
 	err = create_multi_out_ctls(codec, cfg->line_outs, cfg->line_out_pins,
 				    spec->multiout.dac_nids,
@@ -3161,20 +3340,13 @@
 			return err;
 	}
 
-	if (spec->line_switch) {
-		err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH,
-					   "Line In as Output Switch",
-					   spec->line_switch << 8);
-		if (err < 0)
-			return err;
-	}
-
-	if (spec->mic_switch) {
-		err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH,
-					   "Mic as Output Switch",
-					   (spec->mic_switch << 8) | 1);
-		if (err < 0)
-			return err;
+	for (idx = AUTO_PIN_MIC; idx <= AUTO_PIN_FRONT_LINE; idx++) {
+		nid = cfg->input_pins[idx];
+		if (nid) {
+			err = stac92xx_add_jack_mode_control(codec, nid, idx);
+			if (err < 0)
+				return err;
+		}
 	}
 
 	return 0;
@@ -3639,6 +3811,8 @@
 		err = snd_hda_attach_beep_device(codec, nid);
 		if (err < 0)
 			return err;
+		/* IDT/STAC codecs have linear beep tone parameter */
+		codec->beep->linear_tone = 1;
 		/* if no beep switch is available, make its own one */
 		caps = query_amp_caps(codec, nid, HDA_OUTPUT);
 		if (codec->beep &&
@@ -4082,7 +4256,7 @@
 			unsigned int pinctl, conf;
 			if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) {
 				/* for mic pins, force to initialize */
-				pinctl = stac92xx_get_vref(codec, nid);
+				pinctl = stac92xx_get_default_vref(codec, nid);
 				pinctl |= AC_PINCTL_IN_EN;
 				stac92xx_auto_set_pinctl(codec, nid, pinctl);
 			} else {
@@ -4535,17 +4709,19 @@
 	return 0;
 }
 
-
 /*
- * using power check for controlling mute led of HP HDX notebooks
+ * using power check for controlling mute led of HP notebooks
  * check for mute state only on Speakers (nid = 0x10)
  *
  * For this feature CONFIG_SND_HDA_POWER_SAVE is needed, otherwise
  * the LED is NOT working properly !
+ *
+ * Changed name to reflect that it now works for any designated
+ * model, not just HP HDX.
  */
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
-static int stac92xx_hp_hdx_check_power_status(struct hda_codec *codec,
+static int stac92xx_hp_check_power_status(struct hda_codec *codec,
 					      hda_nid_t nid)
 {
 	struct sigmatel_spec *spec = codec->spec;
@@ -4553,9 +4729,9 @@
 	if (nid == 0x10) {
 		if (snd_hda_codec_amp_read(codec, nid, 0, HDA_OUTPUT, 0) &
 		    HDA_AMP_MUTE)
-			spec->gpio_data &= ~0x08;  /* orange */
+			spec->gpio_data &= ~spec->gpio_led; /* orange */
 		else
-			spec->gpio_data |= 0x08;   /* white */
+			spec->gpio_data |= spec->gpio_led; /* white */
 
 		stac_gpio_set(codec, spec->gpio_mask,
 			      spec->gpio_dir,
@@ -5201,6 +5377,15 @@
 	if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP)
 		snd_hda_sequence_write_cache(codec, unmute_init);
 
+	/* Some HP machines seem to have unstable codec communications
+	 * especially with ATI fglrx driver.  For recovering from the
+	 * CORB/RIRB stall, allow the BUS reset and keep always sync
+	 */
+	if (spec->board_config == STAC_HP_DV5) {
+		codec->bus->sync_write = 1;
+		codec->bus->allow_bus_reset = 1;
+	}
+
 	spec->aloopback_ctl = stac92hd71bxx_loopback;
 	spec->aloopback_mask = 0x50;
 	spec->aloopback_shift = 0;
@@ -5234,6 +5419,15 @@
 		spec->num_smuxes = 0;
 		spec->num_dmuxes = 1;
 		break;
+	case STAC_HP_DV4_1222NR:
+		spec->num_dmics = 1;
+		/* I don't know if it needs 1 or 2 smuxes - will wait for
+		 * bug reports to fix if needed
+		 */
+		spec->num_smuxes = 1;
+		spec->num_dmuxes = 1;
+		spec->gpio_led = 0x01;
+		/* fallthrough */
 	case STAC_HP_DV5:
 		snd_hda_codec_set_pincfg(codec, 0x0d, 0x90170010);
 		stac92xx_auto_set_pinctl(codec, 0x0d, AC_PINCTL_OUT_EN);
@@ -5242,22 +5436,21 @@
 		spec->num_dmics = 1;
 		spec->num_dmuxes = 1;
 		spec->num_smuxes = 1;
-		/*
-		 * For controlling MUTE LED on HP HDX16/HDX18 notebooks,
-		 * the CONFIG_SND_HDA_POWER_SAVE is needed to be set.
-		 */
-#ifdef CONFIG_SND_HDA_POWER_SAVE
 		/* orange/white mute led on GPIO3, orange=0, white=1 */
-		spec->gpio_mask |= 0x08;
-		spec->gpio_dir  |= 0x08;
-		spec->gpio_data |= 0x08;  /* set to white */
+		spec->gpio_led = 0x08;
+		break;
+	}
 
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	if (spec->gpio_led) {
+		spec->gpio_mask |= spec->gpio_led;
+		spec->gpio_dir |= spec->gpio_led;
+		spec->gpio_data |= spec->gpio_led;
 		/* register check_power_status callback. */
 		codec->patch_ops.check_power_status =
-		    stac92xx_hp_hdx_check_power_status;
+			stac92xx_hp_check_power_status;
+	}
 #endif	
-		break;
-	};
 
 	spec->multiout.dac_nids = spec->dac_nids;
 	if (spec->dinput_mux)
@@ -5282,7 +5475,7 @@
 	codec->proc_widget_hook = stac92hd7x_proc_hook;
 
 	return 0;
-};
+}
 
 static int patch_stac922x(struct hda_codec *codec)
 {
@@ -5437,7 +5630,7 @@
 			/* correct the device field to SPDIF out */
 			snd_hda_codec_set_pincfg(codec, 0x21, 0x01442070);
 			break;
-		};
+		}
 		/* configure the analog microphone on some laptops */
 		snd_hda_codec_set_pincfg(codec, 0x0c, 0x90a79130);
 		/* correct the front output jack as a hp out */
@@ -5747,6 +5940,7 @@
  	{ .id = 0x83847661, .name = "CXD9872RD/K", .patch = patch_stac9872 },
  	{ .id = 0x83847662, .name = "STAC9872AK", .patch = patch_stac9872 },
  	{ .id = 0x83847664, .name = "CXD9872AKD", .patch = patch_stac9872 },
+	{ .id = 0x83847698, .name = "STAC9205", .patch = patch_stac9205 },
  	{ .id = 0x838476a0, .name = "STAC9205", .patch = patch_stac9205 },
  	{ .id = 0x838476a1, .name = "STAC9205D", .patch = patch_stac9205 },
  	{ .id = 0x838476a2, .name = "STAC9204", .patch = patch_stac9205 },
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index b25a5cc..8e004fb 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -205,7 +205,7 @@
 
 	/* playback */
 	struct hda_multi_out multiout;
-	hda_nid_t extra_dig_out_nid;
+	hda_nid_t slave_dig_outs[2];
 
 	/* capture */
 	unsigned int num_adc_nids;
@@ -731,21 +731,6 @@
 	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
 }
 
-/* setup SPDIF output stream */
-static void setup_dig_playback_stream(struct hda_codec *codec, hda_nid_t nid,
-				 unsigned int stream_tag, unsigned int format)
-{
-	/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
-	if (codec->spdif_ctls & AC_DIG1_ENABLE)
-		snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
-				    codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
-	snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format);
-	/* turn on again (if needed) */
-	if (codec->spdif_ctls & AC_DIG1_ENABLE)
-		snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
-				    codec->spdif_ctls & 0xff);
-}
-
 static int via_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 					struct hda_codec *codec,
 					unsigned int stream_tag,
@@ -753,19 +738,16 @@
 					struct snd_pcm_substream *substream)
 {
 	struct via_spec *spec = codec->spec;
-	hda_nid_t nid;
+	return snd_hda_multi_out_dig_prepare(codec, &spec->multiout,
+					     stream_tag, format, substream);
+}
 
-	/* 1st or 2nd S/PDIF */
-	if (substream->number == 0)
-		nid = spec->multiout.dig_out_nid;
-	else if (substream->number == 1)
-		nid = spec->extra_dig_out_nid;
-	else
-		return -1;
-
-	mutex_lock(&codec->spdif_mutex);
-	setup_dig_playback_stream(codec, nid, stream_tag, format);
-	mutex_unlock(&codec->spdif_mutex);
+static int via_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
+{
+	struct via_spec *spec = codec->spec;
+	snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
 	return 0;
 }
 
@@ -842,7 +824,8 @@
 	.ops = {
 		.open = via_dig_playback_pcm_open,
 		.close = via_dig_playback_pcm_close,
-		.prepare = via_dig_playback_pcm_prepare
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
 	},
 };
 
@@ -874,13 +857,6 @@
 		if (err < 0)
 			return err;
 		spec->multiout.share_spdif = 1;
-
-		if (spec->extra_dig_out_nid) {
-			err = snd_hda_create_spdif_out_ctls(codec,
-						    spec->extra_dig_out_nid);
-			if (err < 0)
-				return err;
-		}
 	}
 	if (spec->dig_in_nid) {
 		err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid);
@@ -1013,10 +989,6 @@
 		via_gpio_control(codec);
 }
 
-static hda_nid_t slave_dig_outs[] = {
-	0,
-};
-
 static int via_init(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
@@ -1051,8 +1023,9 @@
 		snd_hda_codec_write(codec, spec->autocfg.dig_in_pin, 0,
 				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN);
 
-	/* no slave outs */
-	codec->slave_dig_outs = slave_dig_outs;
+	/* assign slave outs */
+	if (spec->slave_dig_outs[0])
+		codec->slave_dig_outs = spec->slave_dig_outs;
 
  	return 0;
 }
@@ -2134,7 +2107,8 @@
 	.ops = {
 		.open = via_dig_playback_pcm_open,
 		.close = via_dig_playback_pcm_close,
-		.prepare = via_dig_playback_pcm_prepare
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
 	},
 };
 
@@ -2589,14 +2563,15 @@
 };
 
 static struct hda_pcm_stream vt1708S_pcm_digital_playback = {
-	.substreams = 2,
+	.substreams = 1,
 	.channels_min = 2,
 	.channels_max = 2,
 	/* NID is set in via_build_pcms */
 	.ops = {
 		.open = via_dig_playback_pcm_open,
 		.close = via_dig_playback_pcm_close,
-		.prepare = via_dig_playback_pcm_prepare
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
 	},
 };
 
@@ -2805,14 +2780,37 @@
 	return 0;
 }
 
+/* fill out digital output widgets; one for master and one for slave outputs */
+static void fill_dig_outs(struct hda_codec *codec)
+{
+	struct via_spec *spec = codec->spec;
+	int i;
+
+	for (i = 0; i < spec->autocfg.dig_outs; i++) {
+		hda_nid_t nid;
+		int conn;
+
+		nid = spec->autocfg.dig_out_pins[i];
+		if (!nid)
+			continue;
+		conn = snd_hda_get_connections(codec, nid, &nid, 1);
+		if (conn < 1)
+			continue;
+		if (!spec->multiout.dig_out_nid)
+			spec->multiout.dig_out_nid = nid;
+		else {
+			spec->slave_dig_outs[0] = nid;
+			break; /* at most two dig outs */
+		}
+	}
+}
+
 static int vt1708S_parse_auto_config(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
 	int err;
-	static hda_nid_t vt1708s_ignore[] = {0x21, 0};
 
-	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
-					   vt1708s_ignore);
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
 	if (err < 0)
 		return err;
 	err = vt1708S_auto_fill_dac_nids(spec, &spec->autocfg);
@@ -2833,10 +2831,7 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_outs)
-		spec->multiout.dig_out_nid = VT1708S_DIGOUT_NID;
-
-	spec->extra_dig_out_nid = 0x15;
+	fill_dig_outs(codec);
 
 	if (spec->kctls.list)
 		spec->mixers[spec->num_mixers++] = spec->kctls.list;
@@ -3000,7 +2995,8 @@
 	.ops = {
 		.open = via_dig_playback_pcm_open,
 		.close = via_dig_playback_pcm_close,
-		.prepare = via_dig_playback_pcm_prepare
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
 	},
 };
 
@@ -3128,10 +3124,8 @@
 {
 	struct via_spec *spec = codec->spec;
 	int err;
-	static hda_nid_t vt1702_ignore[] = {0x1C, 0};
 
-	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
-					   vt1702_ignore);
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
 	if (err < 0)
 		return err;
 	err = vt1702_auto_fill_dac_nids(spec, &spec->autocfg);
@@ -3152,10 +3146,7 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_outs)
-		spec->multiout.dig_out_nid = VT1702_DIGOUT_NID;
-
-	spec->extra_dig_out_nid = 0x1B;
+	fill_dig_outs(codec);
 
 	if (spec->kctls.list)
 		spec->mixers[spec->num_mixers++] = spec->kctls.list;
diff --git a/sound/pci/ice1712/Makefile b/sound/pci/ice1712/Makefile
index f99fe08..536eae2 100644
--- a/sound/pci/ice1712/Makefile
+++ b/sound/pci/ice1712/Makefile
@@ -5,7 +5,7 @@
 
 snd-ice17xx-ak4xxx-objs := ak4xxx.o
 snd-ice1712-objs := ice1712.o delta.o hoontech.o ews.o
-snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o
+snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o maya44.o
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_ICE1712) += snd-ice1712.o snd-ice17xx-ak4xxx.o
diff --git a/sound/pci/ice1712/ice1712.h b/sound/pci/ice1712/ice1712.h
index fdae6de..adc909e 100644
--- a/sound/pci/ice1712/ice1712.h
+++ b/sound/pci/ice1712/ice1712.h
@@ -335,6 +335,7 @@
 	unsigned int force_rdma1:1;	/* VT1720/4 - RDMA1 as non-spdif */
 	unsigned int midi_output:1;	/* VT1720/4: MIDI output triggered */
 	unsigned int midi_input:1;	/* VT1720/4: MIDI input triggered */
+	unsigned int own_routing:1;	/* VT1720/4: use own routing ctls */
 	unsigned int num_total_dacs;	/* total DACs */
 	unsigned int num_total_adcs;	/* total ADCs */
 	unsigned int cur_rate;		/* current rate */
@@ -458,10 +459,17 @@
 	return  snd_ice1712_gpio_read(ice) & mask;
 }
 
+/* route access functions */
+int snd_ice1724_get_route_val(struct snd_ice1712 *ice, int shift);
+int snd_ice1724_put_route_val(struct snd_ice1712 *ice, unsigned int val,
+								int shift);
+
 int snd_ice1712_spdif_build_controls(struct snd_ice1712 *ice);
 
-int snd_ice1712_akm4xxx_init(struct snd_akm4xxx *ak, const struct snd_akm4xxx *template,
-			     const struct snd_ak4xxx_private *priv, struct snd_ice1712 *ice);
+int snd_ice1712_akm4xxx_init(struct snd_akm4xxx *ak,
+			     const struct snd_akm4xxx *template,
+			     const struct snd_ak4xxx_private *priv,
+			     struct snd_ice1712 *ice);
 void snd_ice1712_akm4xxx_free(struct snd_ice1712 *ice);
 int snd_ice1712_akm4xxx_build_controls(struct snd_ice1712 *ice);
 
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index 128510e7..36ade77 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -49,6 +49,7 @@
 #include "prodigy192.h"
 #include "prodigy_hifi.h"
 #include "juli.h"
+#include "maya44.h"
 #include "phase.h"
 #include "wtm.h"
 #include "se.h"
@@ -65,6 +66,7 @@
 	       PRODIGY192_DEVICE_DESC
 	       PRODIGY_HIFI_DEVICE_DESC
 	       JULI_DEVICE_DESC
+	       MAYA44_DEVICE_DESC
 	       PHASE_DEVICE_DESC
 	       WTM_DEVICE_DESC
 	       SE_DEVICE_DESC
@@ -626,7 +628,7 @@
 	return 0;
 }
 
-static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
+static int snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
 				    int force)
 {
 	unsigned long flags;
@@ -634,17 +636,18 @@
 	unsigned int i, old_rate;
 
 	if (rate > ice->hw_rates->list[ice->hw_rates->count - 1])
-		return;
+		return -EINVAL;
+
 	spin_lock_irqsave(&ice->reg_lock, flags);
 	if ((inb(ICEMT1724(ice, DMA_CONTROL)) & DMA_STARTS) ||
 	    (inb(ICEMT1724(ice, DMA_PAUSE)) & DMA_PAUSES)) {
 		/* running? we cannot change the rate now... */
 		spin_unlock_irqrestore(&ice->reg_lock, flags);
-		return;
+		return -EBUSY;
 	}
 	if (!force && is_pro_rate_locked(ice)) {
 		spin_unlock_irqrestore(&ice->reg_lock, flags);
-		return;
+		return (rate == ice->cur_rate) ? 0 : -EBUSY;
 	}
 
 	old_rate = ice->get_rate(ice);
@@ -652,7 +655,7 @@
 		ice->set_rate(ice, rate);
 	else if (rate == ice->cur_rate) {
 		spin_unlock_irqrestore(&ice->reg_lock, flags);
-		return;
+		return 0;
 	}
 
 	ice->cur_rate = rate;
@@ -674,13 +677,15 @@
 	}
 	if (ice->spdif.ops.setup_rate)
 		ice->spdif.ops.setup_rate(ice, rate);
+
+	return 0;
 }
 
 static int snd_vt1724_pcm_hw_params(struct snd_pcm_substream *substream,
 				    struct snd_pcm_hw_params *hw_params)
 {
 	struct snd_ice1712 *ice = snd_pcm_substream_chip(substream);
-	int i, chs;
+	int i, chs, err;
 
 	chs = params_channels(hw_params);
 	mutex_lock(&ice->open_mutex);
@@ -715,7 +720,11 @@
 		}
 	}
 	mutex_unlock(&ice->open_mutex);
-	snd_vt1724_set_pro_rate(ice, params_rate(hw_params), 0);
+
+	err = snd_vt1724_set_pro_rate(ice, params_rate(hw_params), 0);
+	if (err < 0)
+		return err;
+
 	return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
 }
 
@@ -848,20 +857,39 @@
 #endif
 }
 
-static const struct vt1724_pcm_reg vt1724_playback_pro_reg = {
+static const struct vt1724_pcm_reg vt1724_pdma0_reg = {
 	.addr = VT1724_MT_PLAYBACK_ADDR,
 	.size = VT1724_MT_PLAYBACK_SIZE,
 	.count = VT1724_MT_PLAYBACK_COUNT,
 	.start = VT1724_PDMA0_START,
 };
 
-static const struct vt1724_pcm_reg vt1724_capture_pro_reg = {
+static const struct vt1724_pcm_reg vt1724_pdma4_reg = {
+	.addr = VT1724_MT_PDMA4_ADDR,
+	.size = VT1724_MT_PDMA4_SIZE,
+	.count = VT1724_MT_PDMA4_COUNT,
+	.start = VT1724_PDMA4_START,
+};
+
+static const struct vt1724_pcm_reg vt1724_rdma0_reg = {
 	.addr = VT1724_MT_CAPTURE_ADDR,
 	.size = VT1724_MT_CAPTURE_SIZE,
 	.count = VT1724_MT_CAPTURE_COUNT,
 	.start = VT1724_RDMA0_START,
 };
 
+static const struct vt1724_pcm_reg vt1724_rdma1_reg = {
+	.addr = VT1724_MT_RDMA1_ADDR,
+	.size = VT1724_MT_RDMA1_SIZE,
+	.count = VT1724_MT_RDMA1_COUNT,
+	.start = VT1724_RDMA1_START,
+};
+
+#define vt1724_playback_pro_reg vt1724_pdma0_reg
+#define vt1724_playback_spdif_reg vt1724_pdma4_reg
+#define vt1724_capture_pro_reg vt1724_rdma0_reg
+#define vt1724_capture_spdif_reg vt1724_rdma1_reg
+
 static const struct snd_pcm_hardware snd_vt1724_playback_pro = {
 	.info =			(SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
 				 SNDRV_PCM_INFO_BLOCK_TRANSFER |
@@ -1077,20 +1105,6 @@
  * SPDIF PCM
  */
 
-static const struct vt1724_pcm_reg vt1724_playback_spdif_reg = {
-	.addr = VT1724_MT_PDMA4_ADDR,
-	.size = VT1724_MT_PDMA4_SIZE,
-	.count = VT1724_MT_PDMA4_COUNT,
-	.start = VT1724_PDMA4_START,
-};
-
-static const struct vt1724_pcm_reg vt1724_capture_spdif_reg = {
-	.addr = VT1724_MT_RDMA1_ADDR,
-	.size = VT1724_MT_RDMA1_SIZE,
-	.count = VT1724_MT_RDMA1_COUNT,
-	.start = VT1724_RDMA1_START,
-};
-
 /* update spdif control bits; call with reg_lock */
 static void update_spdif_bits(struct snd_ice1712 *ice, unsigned int val)
 {
@@ -1963,7 +1977,7 @@
 	return idx * 3;
 }
 
-static int get_route_val(struct snd_ice1712 *ice, int shift)
+int snd_ice1724_get_route_val(struct snd_ice1712 *ice, int shift)
 {
 	unsigned long val;
 	unsigned char eitem;
@@ -1982,7 +1996,8 @@
 	return eitem;
 }
 
-static int put_route_val(struct snd_ice1712 *ice, unsigned int val, int shift)
+int snd_ice1724_put_route_val(struct snd_ice1712 *ice, unsigned int val,
+								int shift)
 {
 	unsigned int old_val, nval;
 	int change;
@@ -2010,7 +2025,7 @@
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
 	ucontrol->value.enumerated.item[0] =
-		get_route_val(ice, analog_route_shift(idx));
+		snd_ice1724_get_route_val(ice, analog_route_shift(idx));
 	return 0;
 }
 
@@ -2019,8 +2034,9 @@
 {
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
-	return put_route_val(ice, ucontrol->value.enumerated.item[0],
-			     analog_route_shift(idx));
+	return snd_ice1724_put_route_val(ice,
+					 ucontrol->value.enumerated.item[0],
+					 analog_route_shift(idx));
 }
 
 static int snd_vt1724_pro_route_spdif_get(struct snd_kcontrol *kcontrol,
@@ -2029,7 +2045,7 @@
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
 	ucontrol->value.enumerated.item[0] =
-		get_route_val(ice, digital_route_shift(idx));
+		snd_ice1724_get_route_val(ice, digital_route_shift(idx));
 	return 0;
 }
 
@@ -2038,11 +2054,13 @@
 {
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
-	return put_route_val(ice, ucontrol->value.enumerated.item[0],
-			     digital_route_shift(idx));
+	return snd_ice1724_put_route_val(ice,
+					 ucontrol->value.enumerated.item[0],
+					 digital_route_shift(idx));
 }
 
-static struct snd_kcontrol_new snd_vt1724_mixer_pro_analog_route __devinitdata = {
+static struct snd_kcontrol_new snd_vt1724_mixer_pro_analog_route __devinitdata =
+{
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "H/W Playback Route",
 	.info = snd_vt1724_pro_route_info,
@@ -2109,6 +2127,7 @@
 	snd_vt1724_prodigy_hifi_cards,
 	snd_vt1724_prodigy192_cards,
 	snd_vt1724_juli_cards,
+	snd_vt1724_maya44_cards,
 	snd_vt1724_phase_cards,
 	snd_vt1724_wtm_cards,
 	snd_vt1724_se_cards,
@@ -2246,8 +2265,10 @@
 static void __devinit snd_vt1724_chip_reset(struct snd_ice1712 *ice)
 {
 	outb(VT1724_RESET , ICEREG1724(ice, CONTROL));
+	inb(ICEREG1724(ice, CONTROL)); /* pci posting flush */
 	msleep(10);
 	outb(0, ICEREG1724(ice, CONTROL));
+	inb(ICEREG1724(ice, CONTROL)); /* pci posting flush */
 	msleep(10);
 }
 
@@ -2277,9 +2298,12 @@
 	if (snd_BUG_ON(!ice->pcm))
 		return -EIO;
 
-	err = snd_ctl_add(ice->card, snd_ctl_new1(&snd_vt1724_mixer_pro_spdif_route, ice));
-	if (err < 0)
-		return err;
+	if (!ice->own_routing) {
+		err = snd_ctl_add(ice->card,
+			snd_ctl_new1(&snd_vt1724_mixer_pro_spdif_route, ice));
+		if (err < 0)
+			return err;
+	}
 
 	err = snd_ctl_add(ice->card, snd_ctl_new1(&snd_vt1724_spdif_switch, ice));
 	if (err < 0)
@@ -2326,7 +2350,7 @@
 	if (err < 0)
 		return err;
 
-	if (ice->num_total_dacs > 0) {
+	if (!ice->own_routing && ice->num_total_dacs > 0) {
 		struct snd_kcontrol_new tmp = snd_vt1724_mixer_pro_analog_route;
 		tmp.count = ice->num_total_dacs;
 		if (ice->vt1720 && tmp.count > 2)
diff --git a/sound/pci/ice1712/maya44.c b/sound/pci/ice1712/maya44.c
new file mode 100644
index 0000000..3e1c20a
--- /dev/null
+++ b/sound/pci/ice1712/maya44.c
@@ -0,0 +1,779 @@
+/*
+ *   ALSA driver for ICEnsemble VT1724 (Envy24HT)
+ *
+ *   Lowlevel functions for ESI Maya44 cards
+ *
+ *	Copyright (c) 2009 Takashi Iwai <tiwai@suse.de>
+ *	Based on the patches by Rainer Zimmermann <mail@lightshed.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/tlv.h>
+
+#include "ice1712.h"
+#include "envy24ht.h"
+#include "maya44.h"
+
+/* WM8776 register indexes */
+#define WM8776_REG_HEADPHONE_L		0x00
+#define WM8776_REG_HEADPHONE_R		0x01
+#define WM8776_REG_HEADPHONE_MASTER	0x02
+#define WM8776_REG_DAC_ATTEN_L		0x03
+#define WM8776_REG_DAC_ATTEN_R		0x04
+#define WM8776_REG_DAC_ATTEN_MASTER	0x05
+#define WM8776_REG_DAC_PHASE		0x06
+#define WM8776_REG_DAC_CONTROL		0x07
+#define WM8776_REG_DAC_MUTE		0x08
+#define WM8776_REG_DAC_DEEMPH		0x09
+#define WM8776_REG_DAC_IF_CONTROL	0x0a
+#define WM8776_REG_ADC_IF_CONTROL	0x0b
+#define WM8776_REG_MASTER_MODE_CONTROL	0x0c
+#define WM8776_REG_POWERDOWN		0x0d
+#define WM8776_REG_ADC_ATTEN_L		0x0e
+#define WM8776_REG_ADC_ATTEN_R		0x0f
+#define WM8776_REG_ADC_ALC1		0x10
+#define WM8776_REG_ADC_ALC2		0x11
+#define WM8776_REG_ADC_ALC3		0x12
+#define WM8776_REG_ADC_NOISE_GATE	0x13
+#define WM8776_REG_ADC_LIMITER		0x14
+#define WM8776_REG_ADC_MUX		0x15
+#define WM8776_REG_OUTPUT_MUX		0x16
+#define WM8776_REG_RESET		0x17
+
+#define WM8776_NUM_REGS			0x18
+
+/* clock ratio identifiers for snd_wm8776_set_rate() */
+#define WM8776_CLOCK_RATIO_128FS	0
+#define WM8776_CLOCK_RATIO_192FS	1
+#define WM8776_CLOCK_RATIO_256FS	2
+#define WM8776_CLOCK_RATIO_384FS	3
+#define WM8776_CLOCK_RATIO_512FS	4
+#define WM8776_CLOCK_RATIO_768FS	5
+
+enum { WM_VOL_HP, WM_VOL_DAC, WM_VOL_ADC, WM_NUM_VOLS };
+enum { WM_SW_DAC, WM_SW_BYPASS, WM_NUM_SWITCHES };
+
+struct snd_wm8776 {
+	unsigned char addr;
+	unsigned short regs[WM8776_NUM_REGS];
+	unsigned char volumes[WM_NUM_VOLS][2];
+	unsigned int switch_bits;
+};
+
+struct snd_maya44 {
+	struct snd_ice1712 *ice;
+	struct snd_wm8776 wm[2];
+	struct mutex mutex;
+};
+
+
+/* write the given register and save the data to the cache */
+static void wm8776_write(struct snd_ice1712 *ice, struct snd_wm8776 *wm,
+			 unsigned char reg, unsigned short val)
+{
+	/*
+	 * WM8776 registers are up to 9 bits wide, bit 8 is placed in the LSB
+	 * of the address field
+	 */
+	snd_vt1724_write_i2c(ice, wm->addr,
+			     (reg << 1) | ((val >> 8) & 1),
+			     val & 0xff);
+	wm->regs[reg] = val;
+}
+
+/*
+ * update the given register with and/or mask and save the data to the cache
+ */
+static int wm8776_write_bits(struct snd_ice1712 *ice, struct snd_wm8776 *wm,
+			     unsigned char reg,
+			     unsigned short mask, unsigned short val)
+{
+	val |= wm->regs[reg] & ~mask;
+	if (val != wm->regs[reg]) {
+		wm8776_write(ice, wm, reg, val);
+		return 1;
+	}
+	return 0;
+}
+
+
+/*
+ * WM8776 volume controls
+ */
+
+struct maya_vol_info {
+	unsigned int maxval;		/* volume range: 0..maxval */
+	unsigned char regs[2];		/* left and right registers */
+	unsigned short mask;		/* value mask */
+	unsigned short offset;		/* zero-value offset */
+	unsigned short mute;		/* mute bit */
+	unsigned short update;		/* update bits */
+	unsigned char mux_bits[2];	/* extra bits for ADC mute */
+};
+
+static struct maya_vol_info vol_info[WM_NUM_VOLS] = {
+	[WM_VOL_HP] = {
+		.maxval = 80,
+		.regs = { WM8776_REG_HEADPHONE_L, WM8776_REG_HEADPHONE_R },
+		.mask = 0x7f,
+		.offset = 0x30,
+		.mute = 0x00,
+		.update = 0x180,	/* update and zero-cross enable */
+	},
+	[WM_VOL_DAC] = {
+		.maxval = 255,
+		.regs = { WM8776_REG_DAC_ATTEN_L, WM8776_REG_DAC_ATTEN_R },
+		.mask = 0xff,
+		.offset = 0x01,
+		.mute = 0x00,
+		.update = 0x100,	/* zero-cross enable */
+	},
+	[WM_VOL_ADC] = {
+		.maxval = 91,
+		.regs = { WM8776_REG_ADC_ATTEN_L, WM8776_REG_ADC_ATTEN_R },
+		.mask = 0xff,
+		.offset = 0xa5,
+		.mute = 0xa5,
+		.update = 0x100,	/* update */
+		.mux_bits = { 0x80, 0x40 }, /* ADCMUX bits */
+	},
+};
+
+/*
+ * dB tables
+ */
+/* headphone output: mute, -73..+6db (1db step) */
+static const DECLARE_TLV_DB_SCALE(db_scale_hp, -7400, 100, 1);
+/* DAC output: mute, -127..0db (0.5db step) */
+static const DECLARE_TLV_DB_SCALE(db_scale_dac, -12750, 50, 1);
+/* ADC gain: mute, -21..+24db (0.5db step) */
+static const DECLARE_TLV_DB_SCALE(db_scale_adc, -2100, 50, 1);
+
+static int maya_vol_info(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_info *uinfo)
+{
+	unsigned int idx = kcontrol->private_value;
+	struct maya_vol_info *vol = &vol_info[idx];
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = vol->maxval;
+	return 0;
+}
+
+static int maya_vol_get(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	struct snd_wm8776 *wm =
+		&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
+	unsigned int idx = kcontrol->private_value;
+
+	mutex_lock(&chip->mutex);
+	ucontrol->value.integer.value[0] = wm->volumes[idx][0];
+	ucontrol->value.integer.value[1] = wm->volumes[idx][1];
+	mutex_unlock(&chip->mutex);
+	return 0;
+}
+
+static int maya_vol_put(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	struct snd_wm8776 *wm =
+		&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
+	unsigned int idx = kcontrol->private_value;
+	struct maya_vol_info *vol = &vol_info[idx];
+	unsigned int val, data;
+	int ch, changed = 0;
+
+	mutex_lock(&chip->mutex);
+	for (ch = 0; ch < 2; ch++) {
+		val = ucontrol->value.integer.value[ch];
+		if (val > vol->maxval)
+			val = vol->maxval;
+		if (val == wm->volumes[idx][ch])
+			continue;
+		if (!val)
+			data = vol->mute;
+		else
+			data = (val - 1) + vol->offset;
+		data |= vol->update;
+		changed |= wm8776_write_bits(chip->ice, wm, vol->regs[ch],
+					     vol->mask | vol->update, data);
+		if (vol->mux_bits[ch])
+			wm8776_write_bits(chip->ice, wm, WM8776_REG_ADC_MUX,
+					  vol->mux_bits[ch],
+					  val ? 0 : vol->mux_bits[ch]);
+		wm->volumes[idx][ch] = val;
+	}
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+/*
+ * WM8776 switch controls
+ */
+
+#define COMPOSE_SW_VAL(idx, reg, mask)	((idx) | ((reg) << 8) | ((mask) << 16))
+#define GET_SW_VAL_IDX(val)	((val) & 0xff)
+#define GET_SW_VAL_REG(val)	(((val) >> 8) & 0xff)
+#define GET_SW_VAL_MASK(val)	(((val) >> 16) & 0xff)
+
+#define maya_sw_info	snd_ctl_boolean_mono_info
+
+static int maya_sw_get(struct snd_kcontrol *kcontrol,
+		       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	struct snd_wm8776 *wm =
+		&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
+	unsigned int idx = GET_SW_VAL_IDX(kcontrol->private_value);
+
+	ucontrol->value.integer.value[0] = (wm->switch_bits >> idx) & 1;
+	return 0;
+}
+
+static int maya_sw_put(struct snd_kcontrol *kcontrol,
+		       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	struct snd_wm8776 *wm =
+		&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
+	unsigned int idx = GET_SW_VAL_IDX(kcontrol->private_value);
+	unsigned int mask, val;
+	int changed;
+
+	mutex_lock(&chip->mutex);
+	mask = 1 << idx;
+	wm->switch_bits &= ~mask;
+	val = ucontrol->value.integer.value[0];
+	if (val)
+		wm->switch_bits |= mask;
+	mask = GET_SW_VAL_MASK(kcontrol->private_value);
+	changed = wm8776_write_bits(chip->ice, wm,
+				    GET_SW_VAL_REG(kcontrol->private_value),
+				    mask, val ? mask : 0);
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+/*
+ * GPIO pins (known ones for maya44)
+ */
+#define GPIO_PHANTOM_OFF	2
+#define GPIO_MIC_RELAY		4
+#define GPIO_SPDIF_IN_INV	5
+#define GPIO_MUST_BE_0		7
+
+/*
+ * GPIO switch controls
+ */
+
+#define COMPOSE_GPIO_VAL(shift, inv)	((shift) | ((inv) << 8))
+#define GET_GPIO_VAL_SHIFT(val)		((val) & 0xff)
+#define GET_GPIO_VAL_INV(val)		(((val) >> 8) & 1)
+
+static int maya_set_gpio_bits(struct snd_ice1712 *ice, unsigned int mask,
+			      unsigned int bits)
+{
+	unsigned int data;
+	data = snd_ice1712_gpio_read(ice);
+	if ((data & mask) == bits)
+		return 0;
+	snd_ice1712_gpio_write(ice, (data & ~mask) | bits);
+	return 1;
+}
+
+#define maya_gpio_sw_info	snd_ctl_boolean_mono_info
+
+static int maya_gpio_sw_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned int shift = GET_GPIO_VAL_SHIFT(kcontrol->private_value);
+	unsigned int val;
+
+	val = (snd_ice1712_gpio_read(chip->ice) >> shift) & 1;
+	if (GET_GPIO_VAL_INV(kcontrol->private_value))
+		val = !val;
+	ucontrol->value.integer.value[0] = val;
+	return 0;
+}
+
+static int maya_gpio_sw_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned int shift = GET_GPIO_VAL_SHIFT(kcontrol->private_value);
+	unsigned int val, mask;
+	int changed;
+
+	mutex_lock(&chip->mutex);
+	mask = 1 << shift;
+	val = ucontrol->value.integer.value[0];
+	if (GET_GPIO_VAL_INV(kcontrol->private_value))
+		val = !val;
+	val = val ? mask : 0;
+	changed = maya_set_gpio_bits(chip->ice, mask, val);
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+/*
+ * capture source selection
+ */
+
+/* known working input slots (0-4) */
+#define MAYA_LINE_IN	1	/* in-2 */
+#define MAYA_MIC_IN	4	/* in-5 */
+
+static void wm8776_select_input(struct snd_maya44 *chip, int idx, int line)
+{
+	wm8776_write_bits(chip->ice, &chip->wm[idx], WM8776_REG_ADC_MUX,
+			  0x1f, 1 << line);
+}
+
+static int maya_rec_src_info(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_info *uinfo)
+{
+	static char *texts[] = { "Line", "Mic" };
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = ARRAY_SIZE(texts);
+	if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+		uinfo->value.enumerated.item =
+			uinfo->value.enumerated.items - 1;
+	strcpy(uinfo->value.enumerated.name,
+	       texts[uinfo->value.enumerated.item]);
+	return 0;
+}
+
+static int maya_rec_src_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	int sel;
+
+	if (snd_ice1712_gpio_read(chip->ice) & (1 << GPIO_MIC_RELAY))
+		sel = 1;
+	else
+		sel = 0;
+	ucontrol->value.enumerated.item[0] = sel;
+	return 0;
+}
+
+static int maya_rec_src_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	int sel = ucontrol->value.enumerated.item[0];
+	int changed;
+
+	mutex_lock(&chip->mutex);
+	changed = maya_set_gpio_bits(chip->ice, GPIO_MIC_RELAY,
+				     sel ? GPIO_MIC_RELAY : 0);
+	wm8776_select_input(chip, 0, sel ? MAYA_MIC_IN : MAYA_LINE_IN);
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+/*
+ * Maya44 routing switch settings have different meanings than the standard
+ * ice1724 switches as defined in snd_vt1724_pro_route_info (ice1724.c).
+ */
+static int maya_pb_route_info(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_info *uinfo)
+{
+	static char *texts[] = {
+		"PCM Out", /* 0 */
+		"Input 1", "Input 2", "Input 3", "Input 4"
+	};
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = ARRAY_SIZE(texts);
+	if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+		uinfo->value.enumerated.item =
+			uinfo->value.enumerated.items - 1;
+	strcpy(uinfo->value.enumerated.name,
+	       texts[uinfo->value.enumerated.item]);
+	return 0;
+}
+
+static int maya_pb_route_shift(int idx)
+{
+	static const unsigned char shift[10] =
+		{ 8, 20, 0, 3, 11, 23, 14, 26, 17, 29 };
+	return shift[idx % 10];
+}
+
+static int maya_pb_route_get(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+	ucontrol->value.enumerated.item[0] =
+		snd_ice1724_get_route_val(chip->ice, maya_pb_route_shift(idx));
+	return 0;
+}
+
+static int maya_pb_route_put(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+	return snd_ice1724_put_route_val(chip->ice,
+					 ucontrol->value.enumerated.item[0],
+					 maya_pb_route_shift(idx));
+}
+
+
+/*
+ * controls to be added
+ */
+
+static struct snd_kcontrol_new maya_controls[] __devinitdata = {
+	{
+		.name = "Crossmix Playback Volume",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = maya_vol_info,
+		.get = maya_vol_get,
+		.put = maya_vol_put,
+		.tlv = { .p = db_scale_hp },
+		.private_value = WM_VOL_HP,
+		.count = 2,
+	},
+	{
+		.name = "PCM Playback Volume",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = maya_vol_info,
+		.get = maya_vol_get,
+		.put = maya_vol_put,
+		.tlv = { .p = db_scale_dac },
+		.private_value = WM_VOL_DAC,
+		.count = 2,
+	},
+	{
+		.name = "Line Capture Volume",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = maya_vol_info,
+		.get = maya_vol_get,
+		.put = maya_vol_put,
+		.tlv = { .p = db_scale_adc },
+		.private_value = WM_VOL_ADC,
+		.count = 2,
+	},
+	{
+		.name = "PCM Playback Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_sw_info,
+		.get = maya_sw_get,
+		.put = maya_sw_put,
+		.private_value = COMPOSE_SW_VAL(WM_SW_DAC,
+						WM8776_REG_OUTPUT_MUX, 0x01),
+		.count = 2,
+	},
+	{
+		.name = "Bypass Playback Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_sw_info,
+		.get = maya_sw_get,
+		.put = maya_sw_put,
+		.private_value = COMPOSE_SW_VAL(WM_SW_BYPASS,
+						WM8776_REG_OUTPUT_MUX, 0x04),
+		.count = 2,
+	},
+	{
+		.name = "Capture Source",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_rec_src_info,
+		.get = maya_rec_src_get,
+		.put = maya_rec_src_put,
+	},
+	{
+		.name = "Mic Phantom Power Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_gpio_sw_info,
+		.get = maya_gpio_sw_get,
+		.put = maya_gpio_sw_put,
+		.private_value = COMPOSE_GPIO_VAL(GPIO_PHANTOM_OFF, 1),
+	},
+	{
+		.name = "SPDIF Capture Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_gpio_sw_info,
+		.get = maya_gpio_sw_get,
+		.put = maya_gpio_sw_put,
+		.private_value = COMPOSE_GPIO_VAL(GPIO_SPDIF_IN_INV, 1),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "H/W Playback Route",
+		.info = maya_pb_route_info,
+		.get = maya_pb_route_get,
+		.put = maya_pb_route_put,
+		.count = 4,  /* FIXME: do controls 5-9 have any meaning? */
+	},
+};
+
+static int __devinit maya44_add_controls(struct snd_ice1712 *ice)
+{
+	int err, i;
+
+	for (i = 0; i < ARRAY_SIZE(maya_controls); i++) {
+		err = snd_ctl_add(ice->card, snd_ctl_new1(&maya_controls[i],
+							  ice->spec));
+		if (err < 0)
+			return err;
+	}
+	return 0;
+}
+
+
+/*
+ * initialize a wm8776 chip
+ */
+static void __devinit wm8776_init(struct snd_ice1712 *ice,
+				  struct snd_wm8776 *wm, unsigned int addr)
+{
+	static const unsigned short inits_wm8776[] = {
+		0x02, 0x100, /* R2: headphone L+R muted + update */
+		0x05, 0x100, /* R5: DAC output L+R muted + update */
+		0x06, 0x000, /* R6: DAC output phase normal */
+		0x07, 0x091, /* R7: DAC enable zero cross detection,
+				normal output */
+		0x08, 0x000, /* R8: DAC soft mute off */
+		0x09, 0x000, /* R9: no deemph, DAC zero detect disabled */
+		0x0a, 0x022, /* R10: DAC I2C mode, std polarities, 24bit */
+		0x0b, 0x022, /* R11: ADC I2C mode, std polarities, 24bit,
+				highpass filter enabled */
+		0x0c, 0x042, /* R12: ADC+DAC slave, ADC+DAC 44,1kHz */
+		0x0d, 0x000, /* R13: all power up */
+		0x0e, 0x100, /* R14: ADC left muted,
+				enable zero cross detection */
+		0x0f, 0x100, /* R15: ADC right muted,
+				enable zero cross detection */
+			     /* R16: ALC...*/
+		0x11, 0x000, /* R17: disable ALC */
+			     /* R18: ALC...*/
+			     /* R19: noise gate...*/
+		0x15, 0x000, /* R21: ADC input mux init, mute all inputs */
+		0x16, 0x001, /* R22: output mux, select DAC */
+		0xff, 0xff
+	};
+
+	const unsigned short *ptr;
+	unsigned char reg;
+	unsigned short data;
+
+	wm->addr = addr;
+	/* enable DAC output; mute bypass, aux & all inputs */
+	wm->switch_bits = (1 << WM_SW_DAC);
+
+	ptr = inits_wm8776;
+	while (*ptr != 0xff) {
+		reg = *ptr++;
+		data = *ptr++;
+		wm8776_write(ice, wm, reg, data);
+	}
+}
+
+
+/*
+ * change the rate on the WM8776 codecs.
+ * this assumes that the VT17xx's rate is changed by the calling function.
+ * NOTE: even though the WM8776's are running in slave mode and rate
+ * selection is automatic, we need to call snd_wm8776_set_rate() here
+ * to make sure some flags are set correctly.
+ */
+static void set_rate(struct snd_ice1712 *ice, unsigned int rate)
+{
+	struct snd_maya44 *chip = ice->spec;
+	unsigned int ratio, adc_ratio, val;
+	int i;
+
+	switch (rate) {
+	case 192000:
+		ratio = WM8776_CLOCK_RATIO_128FS;
+		break;
+	case 176400:
+		ratio = WM8776_CLOCK_RATIO_128FS;
+		break;
+	case 96000:
+		ratio = WM8776_CLOCK_RATIO_256FS;
+		break;
+	case 88200:
+		ratio = WM8776_CLOCK_RATIO_384FS;
+		break;
+	case 48000:
+		ratio = WM8776_CLOCK_RATIO_512FS;
+		break;
+	case 44100:
+		ratio = WM8776_CLOCK_RATIO_512FS;
+		break;
+	case 32000:
+		ratio = WM8776_CLOCK_RATIO_768FS;
+		break;
+	case 0:
+		/* no hint - S/PDIF input is master, simply return */
+		return;
+	default:
+		snd_BUG();
+		return;
+	}
+
+	/*
+	 * this currently sets the same rate for ADC and DAC, but limits
+	 * ADC rate to 256X (96kHz). For 256X mode (96kHz), this sets ADC
+	 * oversampling to 64x, as recommended by WM8776 datasheet.
+	 * Setting the rate is not really necessary in slave mode.
+	 */
+	adc_ratio = ratio;
+	if (adc_ratio < WM8776_CLOCK_RATIO_256FS)
+		adc_ratio = WM8776_CLOCK_RATIO_256FS;
+
+	val = adc_ratio;
+	if (adc_ratio == WM8776_CLOCK_RATIO_256FS)
+		val |= 8;
+	val |= ratio << 4;
+
+	mutex_lock(&chip->mutex);
+	for (i = 0; i < 2; i++)
+		wm8776_write_bits(ice, &chip->wm[i],
+				  WM8776_REG_MASTER_MODE_CONTROL,
+				  0x180, val);
+	mutex_unlock(&chip->mutex);
+}
+
+/*
+ * supported sample rates (to override the default one)
+ */
+
+static unsigned int rates[] = {
+	32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000
+};
+
+/* playback rates: 32..192 kHz */
+static struct snd_pcm_hw_constraint_list dac_rates = {
+	.count = ARRAY_SIZE(rates),
+	.list = rates,
+	.mask = 0
+};
+
+
+/*
+ * chip addresses on I2C bus
+ */
+static unsigned char wm8776_addr[2] __devinitdata = {
+	0x34, 0x36, /* codec 0 & 1 */
+};
+
+/*
+ * initialize the chip
+ */
+static int __devinit maya44_init(struct snd_ice1712 *ice)
+{
+	int i;
+	struct snd_maya44 *chip;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+	mutex_init(&chip->mutex);
+	chip->ice = ice;
+	ice->spec = chip;
+
+	/* initialise codecs */
+	ice->num_total_dacs = 4;
+	ice->num_total_adcs = 4;
+	ice->akm_codecs = 0;
+
+	for (i = 0; i < 2; i++) {
+		wm8776_init(ice, &chip->wm[i], wm8776_addr[i]);
+		wm8776_select_input(chip, i, MAYA_LINE_IN);
+	}
+
+	/* set card specific rates */
+	ice->hw_rates = &dac_rates;
+
+	/* register change rate notifier */
+	ice->gpio.set_pro_rate = set_rate;
+
+	/* RDMA1 (2nd input channel) is used for ADC by default */
+	ice->force_rdma1 = 1;
+
+	/* have an own routing control */
+	ice->own_routing = 1;
+
+	return 0;
+}
+
+
+/*
+ * Maya44 boards don't provide the EEPROM data except for the vendor IDs.
+ * hence the driver needs to sets up it properly.
+ */
+
+static unsigned char maya44_eeprom[] __devinitdata = {
+	[ICE_EEP2_SYSCONF]     = 0x45,
+		/* clock xin1=49.152MHz, mpu401, 2 stereo ADCs+DACs */
+	[ICE_EEP2_ACLINK]      = 0x80,
+		/* I2S */
+	[ICE_EEP2_I2S]         = 0xf8,
+		/* vol, 96k, 24bit, 192k */
+	[ICE_EEP2_SPDIF]       = 0xc3,
+		/* enable spdif out, spdif out supp, spdif-in, ext spdif out */
+	[ICE_EEP2_GPIO_DIR]    = 0xff,
+	[ICE_EEP2_GPIO_DIR1]   = 0xff,
+	[ICE_EEP2_GPIO_DIR2]   = 0xff,
+	[ICE_EEP2_GPIO_MASK]   = 0/*0x9f*/,
+	[ICE_EEP2_GPIO_MASK1]  = 0/*0xff*/,
+	[ICE_EEP2_GPIO_MASK2]  = 0/*0x7f*/,
+	[ICE_EEP2_GPIO_STATE]  = (1 << GPIO_PHANTOM_OFF) |
+			(1 << GPIO_SPDIF_IN_INV),
+	[ICE_EEP2_GPIO_STATE1] = 0x00,
+	[ICE_EEP2_GPIO_STATE2] = 0x00,
+};
+
+/* entry point */
+struct snd_ice1712_card_info snd_vt1724_maya44_cards[] __devinitdata = {
+	{
+		.subvendor = VT1724_SUBDEVICE_MAYA44,
+		.name = "ESI Maya44",
+		.model = "maya44",
+		.chip_init = maya44_init,
+		.build_controls = maya44_add_controls,
+		.eeprom_size = sizeof(maya44_eeprom),
+		.eeprom_data = maya44_eeprom,
+	},
+	{ } /* terminator */
+};
diff --git a/sound/pci/ice1712/maya44.h b/sound/pci/ice1712/maya44.h
new file mode 100644
index 0000000..eafd03a
--- /dev/null
+++ b/sound/pci/ice1712/maya44.h
@@ -0,0 +1,10 @@
+#ifndef __SOUND_MAYA44_H
+#define __SOUND_MAYA44_H
+
+#define MAYA44_DEVICE_DESC		"{ESI,Maya44},"
+
+#define VT1724_SUBDEVICE_MAYA44		0x34315441	/* Maya44 */
+
+extern struct snd_ice1712_card_info  snd_vt1724_maya44_cards[];
+
+#endif	/* __SOUND_MAYA44_H */
diff --git a/sound/pci/lx6464es/Makefile b/sound/pci/lx6464es/Makefile
new file mode 100644
index 0000000..eb04a6c
--- /dev/null
+++ b/sound/pci/lx6464es/Makefile
@@ -0,0 +1,2 @@
+snd-lx6464es-objs := lx6464es.o lx_core.o
+obj-$(CONFIG_SND_LX6464ES) += snd-lx6464es.o
diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c
new file mode 100644
index 0000000..ccf1b38
--- /dev/null
+++ b/sound/pci/lx6464es/lx6464es.c
@@ -0,0 +1,1159 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ *
+ * Copyright (c) 2008, 2009 Tim Blechmann <tim@klingt.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <sound/initval.h>
+#include <sound/control.h>
+#include <sound/info.h>
+
+#include "lx6464es.h"
+
+MODULE_AUTHOR("Tim Blechmann");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("digigram lx6464es");
+MODULE_SUPPORTED_DEVICE("{digigram lx6464es{}}");
+
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for Digigram LX6464ES interface.");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for  Digigram LX6464ES interface.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable/disable specific Digigram LX6464ES soundcards.");
+
+static const char card_name[] = "LX6464ES";
+
+
+#define PCI_DEVICE_ID_PLX_LX6464ES		PCI_DEVICE_ID_PLX_9056
+
+static struct pci_device_id snd_lx6464es_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_LX6464ES),
+	  .subvendor = PCI_VENDOR_ID_DIGIGRAM,
+	  .subdevice = PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM
+	},			/* LX6464ES */
+	{ PCI_DEVICE(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_LX6464ES),
+	  .subvendor = PCI_VENDOR_ID_DIGIGRAM,
+	  .subdevice = PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM
+	},			/* LX6464ES-CAE */
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, snd_lx6464es_ids);
+
+
+
+/* PGO pour USERo dans le registre pci_0x06/loc_0xEC */
+#define CHIPSC_RESET_XILINX (1L<<16)
+
+
+/* alsa callbacks */
+static struct snd_pcm_hardware lx_caps = {
+	.info             = (SNDRV_PCM_INFO_MMAP |
+			     SNDRV_PCM_INFO_INTERLEAVED |
+			     SNDRV_PCM_INFO_MMAP_VALID |
+			     SNDRV_PCM_INFO_SYNC_START),
+	.formats	  = (SNDRV_PCM_FMTBIT_S16_LE |
+			     SNDRV_PCM_FMTBIT_S16_BE |
+			     SNDRV_PCM_FMTBIT_S24_3LE |
+			     SNDRV_PCM_FMTBIT_S24_3BE),
+	.rates            = (SNDRV_PCM_RATE_CONTINUOUS |
+			     SNDRV_PCM_RATE_8000_192000),
+	.rate_min         = 8000,
+	.rate_max         = 192000,
+	.channels_min     = 2,
+	.channels_max     = 64,
+	.buffer_bytes_max = 64*2*3*MICROBLAZE_IBL_MAX*MAX_STREAM_BUFFER,
+	.period_bytes_min = (2*2*MICROBLAZE_IBL_MIN*2),
+	.period_bytes_max = (4*64*MICROBLAZE_IBL_MAX*MAX_STREAM_BUFFER),
+	.periods_min      = 2,
+	.periods_max      = MAX_STREAM_BUFFER,
+};
+
+static int lx_set_granularity(struct lx6464es *chip, u32 gran);
+
+
+static int lx_hardware_open(struct lx6464es *chip,
+			    struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int channels = runtime->channels;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_pcm_uframes_t period_size = runtime->period_size;
+
+	snd_printd(LXP "allocating pipe for %d channels\n", channels);
+	err = lx_pipe_allocate(chip, 0, is_capture, channels);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "allocating pipe failed\n");
+		return err;
+	}
+
+	err = lx_set_granularity(chip, period_size);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "setting granularity to %ld failed\n",
+			   period_size);
+		return err;
+	}
+
+	return 0;
+}
+
+static int lx_hardware_start(struct lx6464es *chip,
+			     struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printd(LXP "setting stream format\n");
+	err = lx_stream_set_format(chip, runtime, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "setting stream format failed\n");
+		return err;
+	}
+
+	snd_printd(LXP "starting pipe\n");
+	err = lx_pipe_start(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "starting pipe failed\n");
+		return err;
+	}
+
+	snd_printd(LXP "waiting for pipe to start\n");
+	err = lx_pipe_wait_for_start(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "waiting for pipe failed\n");
+		return err;
+	}
+
+	return err;
+}
+
+
+static int lx_hardware_stop(struct lx6464es *chip,
+			    struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printd(LXP "pausing pipe\n");
+	err = lx_pipe_pause(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "pausing pipe failed\n");
+		return err;
+	}
+
+	snd_printd(LXP "waiting for pipe to become idle\n");
+	err = lx_pipe_wait_for_idle(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "waiting for pipe failed\n");
+		return err;
+	}
+
+	snd_printd(LXP "stopping pipe\n");
+	err = lx_pipe_stop(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(LXP "stopping pipe failed\n");
+		return err;
+	}
+
+	return err;
+}
+
+
+static int lx_hardware_close(struct lx6464es *chip,
+			     struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printd(LXP "releasing pipe\n");
+	err = lx_pipe_release(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(LXP "releasing pipe failed\n");
+		return err;
+	}
+
+	return err;
+}
+
+
+static int lx_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int err = 0;
+	int board_rate;
+
+	snd_printdd("->lx_pcm_open\n");
+	mutex_lock(&chip->setup_mutex);
+
+	/* copy the struct snd_pcm_hardware struct */
+	runtime->hw = lx_caps;
+
+#if 0
+	/* buffer-size should better be multiple of period-size */
+	err = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0) {
+		snd_printk(KERN_WARNING LXP "could not constrain periods\n");
+		goto exit;
+	}
+#endif
+
+	/* the clock rate cannot be changed */
+	board_rate = chip->board_sample_rate;
+	err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE,
+					   board_rate, board_rate);
+
+	if (err < 0) {
+		snd_printk(KERN_WARNING LXP "could not constrain periods\n");
+		goto exit;
+	}
+
+	/* constrain period size */
+	err = snd_pcm_hw_constraint_minmax(runtime,
+					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+					   MICROBLAZE_IBL_MIN,
+					   MICROBLAZE_IBL_MAX);
+	if (err < 0) {
+		snd_printk(KERN_WARNING LXP
+			   "could not constrain period size\n");
+		goto exit;
+	}
+
+	snd_pcm_hw_constraint_step(runtime, 0,
+				   SNDRV_PCM_HW_PARAM_BUFFER_SIZE, 32);
+
+	snd_pcm_set_sync(substream);
+	err = 0;
+
+exit:
+	runtime->private_data = chip;
+
+	mutex_unlock(&chip->setup_mutex);
+	snd_printdd("<-lx_pcm_open, %d\n", err);
+	return err;
+}
+
+static int lx_pcm_close(struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	snd_printdd("->lx_pcm_close\n");
+	return err;
+}
+
+static snd_pcm_uframes_t lx_pcm_stream_pointer(struct snd_pcm_substream
+					       *substream)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	snd_pcm_uframes_t pos;
+	unsigned long flags;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	struct lx_stream *lx_stream = is_capture ? &chip->capture_stream :
+		&chip->playback_stream;
+
+	snd_printdd("->lx_pcm_stream_pointer\n");
+
+	spin_lock_irqsave(&chip->lock, flags);
+	pos = lx_stream->frame_pos * substream->runtime->period_size;
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	snd_printdd(LXP "stream_pointer at %ld\n", pos);
+	return pos;
+}
+
+static int lx_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	int err = 0;
+	const int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printdd("->lx_pcm_prepare\n");
+
+	mutex_lock(&chip->setup_mutex);
+
+	if (chip->hardware_running[is_capture]) {
+		err = lx_hardware_stop(chip, substream);
+		if (err < 0) {
+			snd_printk(KERN_ERR LXP "failed to stop hardware. "
+				   "Error code %d\n", err);
+			goto exit;
+		}
+
+		err = lx_hardware_close(chip, substream);
+		if (err < 0) {
+			snd_printk(KERN_ERR LXP "failed to close hardware. "
+				   "Error code %d\n", err);
+			goto exit;
+		}
+	}
+
+	snd_printd(LXP "opening hardware\n");
+	err = lx_hardware_open(chip, substream);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "failed to open hardware. "
+			   "Error code %d\n", err);
+		goto exit;
+	}
+
+	err = lx_hardware_start(chip, substream);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "failed to start hardware. "
+			   "Error code %d\n", err);
+		goto exit;
+	}
+
+	chip->hardware_running[is_capture] = 1;
+
+	if (chip->board_sample_rate != substream->runtime->rate) {
+		if (!err)
+			chip->board_sample_rate = substream->runtime->rate;
+	}
+
+exit:
+	mutex_unlock(&chip->setup_mutex);
+	return err;
+}
+
+static int lx_pcm_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *hw_params, int is_capture)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	int err = 0;
+
+	snd_printdd("->lx_pcm_hw_params\n");
+
+	mutex_lock(&chip->setup_mutex);
+
+	/* set dma buffer */
+	err = snd_pcm_lib_malloc_pages(substream,
+				       params_buffer_bytes(hw_params));
+
+	if (is_capture)
+		chip->capture_stream.stream = substream;
+	else
+		chip->playback_stream.stream = substream;
+
+	mutex_unlock(&chip->setup_mutex);
+	return err;
+}
+
+static int lx_pcm_hw_params_playback(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *hw_params)
+{
+	return lx_pcm_hw_params(substream, hw_params, 0);
+}
+
+static int lx_pcm_hw_params_capture(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *hw_params)
+{
+	return lx_pcm_hw_params(substream, hw_params, 1);
+}
+
+static int lx_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	int err = 0;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printdd("->lx_pcm_hw_free\n");
+	mutex_lock(&chip->setup_mutex);
+
+	if (chip->hardware_running[is_capture]) {
+		err = lx_hardware_stop(chip, substream);
+		if (err < 0) {
+			snd_printk(KERN_ERR LXP "failed to stop hardware. "
+				   "Error code %d\n", err);
+			goto exit;
+		}
+
+		err = lx_hardware_close(chip, substream);
+		if (err < 0) {
+			snd_printk(KERN_ERR LXP "failed to close hardware. "
+				   "Error code %d\n", err);
+			goto exit;
+		}
+
+		chip->hardware_running[is_capture] = 0;
+	}
+
+	err = snd_pcm_lib_free_pages(substream);
+
+	if (is_capture)
+		chip->capture_stream.stream = 0;
+	else
+		chip->playback_stream.stream = 0;
+
+exit:
+	mutex_unlock(&chip->setup_mutex);
+	return err;
+}
+
+static void lx_trigger_start(struct lx6464es *chip, struct lx_stream *lx_stream)
+{
+	struct snd_pcm_substream *substream = lx_stream->stream;
+	const int is_capture = lx_stream->is_capture;
+
+	int err;
+
+	const u32 channels = substream->runtime->channels;
+	const u32 bytes_per_frame = channels * 3;
+	const u32 period_size = substream->runtime->period_size;
+	const u32 periods = substream->runtime->periods;
+	const u32 period_bytes = period_size * bytes_per_frame;
+
+	dma_addr_t buf = substream->dma_buffer.addr;
+	int i;
+
+	u32 needed, freed;
+	u32 size_array[5];
+
+	for (i = 0; i != periods; ++i) {
+		u32 buffer_index = 0;
+
+		err = lx_buffer_ask(chip, 0, is_capture, &needed, &freed,
+				    size_array);
+		snd_printdd(LXP "starting: needed %d, freed %d\n",
+			    needed, freed);
+
+		err = lx_buffer_give(chip, 0, is_capture, period_bytes,
+				     lower_32_bits(buf), upper_32_bits(buf),
+				     &buffer_index);
+
+		snd_printdd(LXP "starting: buffer index %x on %p (%d bytes)\n",
+			    buffer_index, (void *)buf, period_bytes);
+		buf += period_bytes;
+	}
+
+	err = lx_buffer_ask(chip, 0, is_capture, &needed, &freed, size_array);
+	snd_printdd(LXP "starting: needed %d, freed %d\n", needed, freed);
+
+	snd_printd(LXP "starting: starting stream\n");
+	err = lx_stream_start(chip, 0, is_capture);
+	if (err < 0)
+		snd_printk(KERN_ERR LXP "couldn't start stream\n");
+	else
+		lx_stream->status = LX_STREAM_STATUS_RUNNING;
+
+	lx_stream->frame_pos = 0;
+}
+
+static void lx_trigger_stop(struct lx6464es *chip, struct lx_stream *lx_stream)
+{
+	const int is_capture = lx_stream->is_capture;
+	int err;
+
+	snd_printd(LXP "stopping: stopping stream\n");
+	err = lx_stream_stop(chip, 0, is_capture);
+	if (err < 0)
+		snd_printk(KERN_ERR LXP "couldn't stop stream\n");
+	else
+		lx_stream->status = LX_STREAM_STATUS_FREE;
+
+}
+
+static void lx_trigger_tasklet_dispatch_stream(struct lx6464es *chip,
+					       struct lx_stream *lx_stream)
+{
+	switch (lx_stream->status) {
+	case LX_STREAM_STATUS_SCHEDULE_RUN:
+		lx_trigger_start(chip, lx_stream);
+		break;
+
+	case LX_STREAM_STATUS_SCHEDULE_STOP:
+		lx_trigger_stop(chip, lx_stream);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static void lx_trigger_tasklet(unsigned long data)
+{
+	struct lx6464es *chip = (struct lx6464es *)data;
+	unsigned long flags;
+
+	snd_printdd("->lx_trigger_tasklet\n");
+
+	spin_lock_irqsave(&chip->lock, flags);
+	lx_trigger_tasklet_dispatch_stream(chip, &chip->capture_stream);
+	lx_trigger_tasklet_dispatch_stream(chip, &chip->playback_stream);
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int lx_pcm_trigger_dispatch(struct lx6464es *chip,
+				   struct lx_stream *lx_stream, int cmd)
+{
+	int err = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		lx_stream->status = LX_STREAM_STATUS_SCHEDULE_RUN;
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		lx_stream->status = LX_STREAM_STATUS_SCHEDULE_STOP;
+		break;
+
+	default:
+		err = -EINVAL;
+		goto exit;
+	}
+	tasklet_schedule(&chip->trigger_tasklet);
+
+exit:
+	return err;
+}
+
+
+static int lx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	const int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+	struct lx_stream *stream = is_capture ? &chip->capture_stream :
+		&chip->playback_stream;
+
+	snd_printdd("->lx_pcm_trigger\n");
+
+	return lx_pcm_trigger_dispatch(chip, stream, cmd);
+}
+
+static int snd_lx6464es_free(struct lx6464es *chip)
+{
+	snd_printdd("->snd_lx6464es_free\n");
+
+	lx_irq_disable(chip);
+
+	if (chip->irq >= 0)
+		free_irq(chip->irq, chip);
+
+	iounmap(chip->port_dsp_bar);
+	ioport_unmap(chip->port_plx_remapped);
+
+	pci_release_regions(chip->pci);
+	pci_disable_device(chip->pci);
+
+	kfree(chip);
+
+	return 0;
+}
+
+static int snd_lx6464es_dev_free(struct snd_device *device)
+{
+	return snd_lx6464es_free(device->device_data);
+}
+
+/* reset the dsp during initialization */
+static int __devinit lx_init_xilinx_reset(struct lx6464es *chip)
+{
+	int i;
+	u32 plx_reg = lx_plx_reg_read(chip, ePLX_CHIPSC);
+
+	snd_printdd("->lx_init_xilinx_reset\n");
+
+	/* activate reset of xilinx */
+	plx_reg &= ~CHIPSC_RESET_XILINX;
+
+	lx_plx_reg_write(chip, ePLX_CHIPSC, plx_reg);
+	msleep(1);
+
+	lx_plx_reg_write(chip, ePLX_MBOX3, 0);
+	msleep(1);
+
+	plx_reg |= CHIPSC_RESET_XILINX;
+	lx_plx_reg_write(chip, ePLX_CHIPSC, plx_reg);
+
+	/* deactivate reset of xilinx */
+	for (i = 0; i != 100; ++i) {
+		u32 reg_mbox3;
+		msleep(10);
+		reg_mbox3 = lx_plx_reg_read(chip, ePLX_MBOX3);
+		if (reg_mbox3) {
+			snd_printd(LXP "xilinx reset done\n");
+			snd_printdd(LXP "xilinx took %d loops\n", i);
+			break;
+		}
+	}
+
+	/* todo: add some error handling? */
+
+	/* clear mr */
+	lx_dsp_reg_write(chip, eReg_CSM, 0);
+
+	/* le xilinx ES peut ne pas etre encore pret, on attend. */
+	msleep(600);
+
+	return 0;
+}
+
+static int __devinit lx_init_xilinx_test(struct lx6464es *chip)
+{
+	u32 reg;
+
+	snd_printdd("->lx_init_xilinx_test\n");
+
+	/* TEST if we have access to Xilinx/MicroBlaze */
+	lx_dsp_reg_write(chip, eReg_CSM, 0);
+
+	reg = lx_dsp_reg_read(chip, eReg_CSM);
+
+	if (reg) {
+		snd_printk(KERN_ERR LXP "Problem: Reg_CSM %x.\n", reg);
+
+		/* PCI9056_SPACE0_REMAP */
+		lx_plx_reg_write(chip, ePLX_PCICR, 1);
+
+		reg = lx_dsp_reg_read(chip, eReg_CSM);
+		if (reg) {
+			snd_printk(KERN_ERR LXP "Error: Reg_CSM %x.\n", reg);
+			return -EAGAIN; /* seems to be appropriate */
+		}
+	}
+
+	snd_printd(LXP "Xilinx/MicroBlaze access test successful\n");
+
+	return 0;
+}
+
+/* initialize ethersound */
+static int __devinit lx_init_ethersound_config(struct lx6464es *chip)
+{
+	int i;
+	u32 orig_conf_es = lx_dsp_reg_read(chip, eReg_CONFES);
+
+	u32 default_conf_es = (64 << IOCR_OUTPUTS_OFFSET) |
+		(64 << IOCR_INPUTS_OFFSET) |
+		(FREQ_RATIO_SINGLE_MODE << FREQ_RATIO_OFFSET);
+
+	u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK)
+		| (default_conf_es & CONFES_WRITE_PART_MASK);
+
+	snd_printdd("->lx_init_ethersound\n");
+
+	chip->freq_ratio = FREQ_RATIO_SINGLE_MODE;
+
+	/*
+	 * write it to the card !
+	 * this actually kicks the ES xilinx, the first time since poweron.
+	 * the MAC address in the Reg_ADMACESMSB Reg_ADMACESLSB registers
+	 * is not ready before this is done, and the bit 2 in Reg_CSES is set.
+	 * */
+	lx_dsp_reg_write(chip, eReg_CONFES, conf_es);
+
+	for (i = 0; i != 1000; ++i) {
+		if (lx_dsp_reg_read(chip, eReg_CSES) & 4) {
+			snd_printd(LXP "ethersound initialized after %dms\n",
+				   i);
+			goto ethersound_initialized;
+		}
+		msleep(1);
+	}
+	snd_printk(KERN_WARNING LXP
+		   "ethersound could not be initialized after %dms\n", i);
+	return -ETIMEDOUT;
+
+ ethersound_initialized:
+	snd_printd(LXP "ethersound initialized\n");
+	return 0;
+}
+
+static int __devinit lx_init_get_version_features(struct lx6464es *chip)
+{
+	u32 dsp_version;
+
+	int err;
+
+	snd_printdd("->lx_init_get_version_features\n");
+
+	err = lx_dsp_get_version(chip, &dsp_version);
+
+	if (err == 0) {
+		u32 freq;
+
+		snd_printk(LXP "DSP version: V%02d.%02d #%d\n",
+			   (dsp_version>>16) & 0xff, (dsp_version>>8) & 0xff,
+			   dsp_version & 0xff);
+
+		/* later: what firmware version do we expect? */
+
+		/* retrieve Play/Rec features */
+		/* done here because we may have to handle alternate
+		 * DSP files. */
+		/* later */
+
+		/* init the EtherSound sample rate */
+		err = lx_dsp_get_clock_frequency(chip, &freq);
+		if (err == 0)
+			chip->board_sample_rate = freq;
+		snd_printd(LXP "actual clock frequency %d\n", freq);
+	} else {
+		snd_printk(KERN_ERR LXP "DSP corrupted \n");
+		err = -EAGAIN;
+	}
+
+	return err;
+}
+
+static int lx_set_granularity(struct lx6464es *chip, u32 gran)
+{
+	int err = 0;
+	u32 snapped_gran = MICROBLAZE_IBL_MIN;
+
+	snd_printdd("->lx_set_granularity\n");
+
+	/* blocksize is a power of 2 */
+	while ((snapped_gran < gran) &&
+	       (snapped_gran < MICROBLAZE_IBL_MAX)) {
+		snapped_gran *= 2;
+	}
+
+	if (snapped_gran == chip->pcm_granularity)
+		return 0;
+
+	err = lx_dsp_set_granularity(chip, snapped_gran);
+	if (err < 0) {
+		snd_printk(KERN_WARNING LXP "could not set granularity\n");
+		err = -EAGAIN;
+	}
+
+	if (snapped_gran != gran)
+		snd_printk(LXP "snapped blocksize to %d\n", snapped_gran);
+
+	snd_printd(LXP "set blocksize on board %d\n", snapped_gran);
+	chip->pcm_granularity = snapped_gran;
+
+	return err;
+}
+
+/* initialize and test the xilinx dsp chip */
+static int __devinit lx_init_dsp(struct lx6464es *chip)
+{
+	int err;
+	u8 mac_address[6];
+	int i;
+
+	snd_printdd("->lx_init_dsp\n");
+
+	snd_printd(LXP "initialize board\n");
+	err = lx_init_xilinx_reset(chip);
+	if (err)
+		return err;
+
+	snd_printd(LXP "testing board\n");
+	err = lx_init_xilinx_test(chip);
+	if (err)
+		return err;
+
+	snd_printd(LXP "initialize ethersound configuration\n");
+	err = lx_init_ethersound_config(chip);
+	if (err)
+		return err;
+
+	lx_irq_enable(chip);
+
+	/** \todo the mac address should be ready by not, but it isn't,
+	 *  so we wait for it */
+	for (i = 0; i != 1000; ++i) {
+		err = lx_dsp_get_mac(chip, mac_address);
+		if (err)
+			return err;
+		if (mac_address[0] || mac_address[1] || mac_address[2] ||
+		    mac_address[3] || mac_address[4] || mac_address[5])
+			goto mac_ready;
+		msleep(1);
+	}
+	return -ETIMEDOUT;
+
+mac_ready:
+	snd_printd(LXP "mac address ready read after: %dms\n", i);
+	snd_printk(LXP "mac address: %02X.%02X.%02X.%02X.%02X.%02X\n",
+		   mac_address[0], mac_address[1], mac_address[2],
+		   mac_address[3], mac_address[4], mac_address[5]);
+
+	err = lx_init_get_version_features(chip);
+	if (err)
+		return err;
+
+	lx_set_granularity(chip, MICROBLAZE_IBL_DEFAULT);
+
+	chip->playback_mute = 0;
+
+	return err;
+}
+
+static struct snd_pcm_ops lx_ops_playback = {
+	.open      = lx_pcm_open,
+	.close     = lx_pcm_close,
+	.ioctl     = snd_pcm_lib_ioctl,
+	.prepare   = lx_pcm_prepare,
+	.hw_params = lx_pcm_hw_params_playback,
+	.hw_free   = lx_pcm_hw_free,
+	.trigger   = lx_pcm_trigger,
+	.pointer   = lx_pcm_stream_pointer,
+};
+
+static struct snd_pcm_ops lx_ops_capture = {
+	.open      = lx_pcm_open,
+	.close     = lx_pcm_close,
+	.ioctl     = snd_pcm_lib_ioctl,
+	.prepare   = lx_pcm_prepare,
+	.hw_params = lx_pcm_hw_params_capture,
+	.hw_free   = lx_pcm_hw_free,
+	.trigger   = lx_pcm_trigger,
+	.pointer   = lx_pcm_stream_pointer,
+};
+
+static int __devinit lx_pcm_create(struct lx6464es *chip)
+{
+	int err;
+	struct snd_pcm *pcm;
+
+	u32 size = 64 *		     /* channels */
+		3 *		     /* 24 bit samples */
+		MAX_STREAM_BUFFER *  /* periods */
+		MICROBLAZE_IBL_MAX * /* frames per period */
+		2;		     /* duplex */
+
+	size = PAGE_ALIGN(size);
+
+	/* hardcoded device name & channel count */
+	err = snd_pcm_new(chip->card, (char *)card_name, 0,
+			  1, 1, &pcm);
+
+	pcm->private_data = chip;
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &lx_ops_playback);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &lx_ops_capture);
+
+	pcm->info_flags = 0;
+	strcpy(pcm->name, card_name);
+
+	err = snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+						    snd_dma_pci_data(chip->pci),
+						    size, size);
+	if (err < 0)
+		return err;
+
+	chip->pcm = pcm;
+	chip->capture_stream.is_capture = 1;
+
+	return 0;
+}
+
+static int lx_control_playback_info(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	return 0;
+}
+
+static int lx_control_playback_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct lx6464es *chip = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.integer.value[0] = chip->playback_mute;
+	return 0;
+}
+
+static int lx_control_playback_put(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct lx6464es *chip = snd_kcontrol_chip(kcontrol);
+	int changed = 0;
+	int current_value = chip->playback_mute;
+
+	if (current_value != ucontrol->value.integer.value[0]) {
+		lx_level_unmute(chip, 0, !current_value);
+		chip->playback_mute = !current_value;
+		changed = 1;
+	}
+	return changed;
+}
+
+static struct snd_kcontrol_new lx_control_playback_switch __devinitdata = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "PCM Playback Switch",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.private_value = 0,
+	.info = lx_control_playback_info,
+	.get = lx_control_playback_get,
+	.put = lx_control_playback_put
+};
+
+
+
+static void lx_proc_levels_read(struct snd_info_entry *entry,
+				struct snd_info_buffer *buffer)
+{
+	u32 levels[64];
+	int err;
+	int i, j;
+	struct lx6464es *chip = entry->private_data;
+
+	snd_iprintf(buffer, "capture levels:\n");
+	err = lx_level_peaks(chip, 1, 64, levels);
+	if (err < 0)
+		return;
+
+	for (i = 0; i != 8; ++i) {
+		for (j = 0; j != 8; ++j)
+			snd_iprintf(buffer, "%08x ", levels[i*8+j]);
+		snd_iprintf(buffer, "\n");
+	}
+
+	snd_iprintf(buffer, "\nplayback levels:\n");
+
+	err = lx_level_peaks(chip, 0, 64, levels);
+	if (err < 0)
+		return;
+
+	for (i = 0; i != 8; ++i) {
+		for (j = 0; j != 8; ++j)
+			snd_iprintf(buffer, "%08x ", levels[i*8+j]);
+		snd_iprintf(buffer, "\n");
+	}
+
+	snd_iprintf(buffer, "\n");
+}
+
+static int __devinit lx_proc_create(struct snd_card *card, struct lx6464es *chip)
+{
+	struct snd_info_entry *entry;
+	int err = snd_card_proc_new(card, "levels", &entry);
+	if (err < 0)
+		return err;
+
+	snd_info_set_text_ops(entry, chip, lx_proc_levels_read);
+	return 0;
+}
+
+
+static int __devinit snd_lx6464es_create(struct snd_card *card,
+					 struct pci_dev *pci,
+					 struct lx6464es **rchip)
+{
+	struct lx6464es *chip;
+	int err;
+
+	static struct snd_device_ops ops = {
+		.dev_free = snd_lx6464es_dev_free,
+	};
+
+	snd_printdd("->snd_lx6464es_create\n");
+
+	*rchip = NULL;
+
+	/* enable PCI device */
+	err = pci_enable_device(pci);
+	if (err < 0)
+		return err;
+
+	pci_set_master(pci);
+
+	/* check if we can restrict PCI DMA transfers to 32 bits */
+	err = pci_set_dma_mask(pci, DMA_32BIT_MASK);
+	if (err < 0) {
+		snd_printk(KERN_ERR "architecture does not support "
+			   "32bit PCI busmaster DMA\n");
+		pci_disable_device(pci);
+		return -ENXIO;
+	}
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL) {
+		err = -ENOMEM;
+		goto alloc_failed;
+	}
+
+	chip->card = card;
+	chip->pci = pci;
+	chip->irq = -1;
+
+	/* initialize synchronization structs */
+	spin_lock_init(&chip->lock);
+	spin_lock_init(&chip->msg_lock);
+	mutex_init(&chip->setup_mutex);
+	tasklet_init(&chip->trigger_tasklet, lx_trigger_tasklet,
+		     (unsigned long)chip);
+	tasklet_init(&chip->tasklet_capture, lx_tasklet_capture,
+		     (unsigned long)chip);
+	tasklet_init(&chip->tasklet_playback, lx_tasklet_playback,
+		     (unsigned long)chip);
+
+	/* request resources */
+	err = pci_request_regions(pci, card_name);
+	if (err < 0)
+		goto request_regions_failed;
+
+	/* plx port */
+	chip->port_plx = pci_resource_start(pci, 1);
+	chip->port_plx_remapped = ioport_map(chip->port_plx,
+					     pci_resource_len(pci, 1));
+
+	/* dsp port */
+	chip->port_dsp_bar = pci_ioremap_bar(pci, 2);
+
+	err = request_irq(pci->irq, lx_interrupt, IRQF_SHARED,
+			  card_name, chip);
+	if (err) {
+		snd_printk(KERN_ERR LXP "unable to grab IRQ %d\n", pci->irq);
+		goto request_irq_failed;
+	}
+	chip->irq = pci->irq;
+
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+	if (err < 0)
+		goto device_new_failed;
+
+	err = lx_init_dsp(chip);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "error during DSP initialization\n");
+		return err;
+	}
+
+	err = lx_pcm_create(chip);
+	if (err < 0)
+		return err;
+
+	err = lx_proc_create(card, chip);
+	if (err < 0)
+		return err;
+
+	err = snd_ctl_add(card, snd_ctl_new1(&lx_control_playback_switch,
+					     chip));
+	if (err < 0)
+		return err;
+
+	snd_card_set_dev(card, &pci->dev);
+
+	*rchip = chip;
+	return 0;
+
+device_new_failed:
+	free_irq(pci->irq, chip);
+
+request_irq_failed:
+	pci_release_regions(pci);
+
+request_regions_failed:
+	kfree(chip);
+
+alloc_failed:
+	pci_disable_device(pci);
+
+	return err;
+}
+
+static int __devinit snd_lx6464es_probe(struct pci_dev *pci,
+					const struct pci_device_id *pci_id)
+{
+	static int dev;
+	struct snd_card *card;
+	struct lx6464es *chip;
+	int err;
+
+	snd_printdd("->snd_lx6464es_probe\n");
+
+	if (dev >= SNDRV_CARDS)
+		return -ENODEV;
+	if (!enable[dev]) {
+		dev++;
+		return -ENOENT;
+	}
+
+	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+	if (err < 0)
+		return err;
+
+	err = snd_lx6464es_create(card, pci, &chip);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "error during snd_lx6464es_create\n");
+		goto out_free;
+	}
+
+	strcpy(card->driver, "lx6464es");
+	strcpy(card->shortname, "Digigram LX6464ES");
+	sprintf(card->longname, "%s at 0x%lx, 0x%p, irq %i",
+		card->shortname, chip->port_plx,
+		chip->port_dsp_bar, chip->irq);
+
+	err = snd_card_register(card);
+	if (err < 0)
+		goto out_free;
+
+	snd_printdd(LXP "initialization successful\n");
+	pci_set_drvdata(pci, card);
+	dev++;
+	return 0;
+
+out_free:
+	snd_card_free(card);
+	return err;
+
+}
+
+static void __devexit snd_lx6464es_remove(struct pci_dev *pci)
+{
+	snd_card_free(pci_get_drvdata(pci));
+	pci_set_drvdata(pci, NULL);
+}
+
+
+static struct pci_driver driver = {
+	.name =     "Digigram LX6464ES",
+	.id_table = snd_lx6464es_ids,
+	.probe =    snd_lx6464es_probe,
+	.remove = __devexit_p(snd_lx6464es_remove),
+};
+
+
+/* module initialization */
+static int __init mod_init(void)
+{
+	return pci_register_driver(&driver);
+}
+
+static void __exit mod_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
diff --git a/sound/pci/lx6464es/lx6464es.h b/sound/pci/lx6464es/lx6464es.h
new file mode 100644
index 0000000..012c010
--- /dev/null
+++ b/sound/pci/lx6464es/lx6464es.h
@@ -0,0 +1,114 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+#ifndef LX6464ES_H
+#define LX6464ES_H
+
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+#include "lx_core.h"
+
+#define LXP "LX6464ES: "
+
+enum {
+    ES_cmd_free         = 0,    /* no command executing */
+    ES_cmd_processing   = 1,	/* execution of a read/write command */
+    ES_read_pending     = 2,    /* a asynchron read command is pending */
+    ES_read_finishing   = 3,    /* a read command has finished waiting (set by
+				 * Interrupt or CancelIrp) */
+};
+
+enum lx_stream_status {
+	LX_STREAM_STATUS_FREE,
+/* 	LX_STREAM_STATUS_OPEN, */
+	LX_STREAM_STATUS_SCHEDULE_RUN,
+/* 	LX_STREAM_STATUS_STARTED, */
+	LX_STREAM_STATUS_RUNNING,
+	LX_STREAM_STATUS_SCHEDULE_STOP,
+/* 	LX_STREAM_STATUS_STOPPED, */
+/* 	LX_STREAM_STATUS_PAUSED */
+};
+
+
+struct lx_stream {
+	struct snd_pcm_substream  *stream;
+	snd_pcm_uframes_t          frame_pos;
+	enum lx_stream_status      status; /* free, open, running, draining
+					    * pause */
+	int                        is_capture:1;
+};
+
+
+struct lx6464es {
+	struct snd_card        *card;
+	struct pci_dev         *pci;
+	int			irq;
+
+	spinlock_t		lock;        /* interrupt spinlock */
+	struct mutex            setup_mutex; /* mutex used in hw_params, open
+					      * and close */
+
+	struct tasklet_struct   trigger_tasklet; /* trigger tasklet */
+	struct tasklet_struct   tasklet_capture;
+	struct tasklet_struct   tasklet_playback;
+
+	/* ports */
+	unsigned long		port_plx;	   /* io port (size=256) */
+	void __iomem           *port_plx_remapped; /* remapped plx port */
+	void __iomem           *port_dsp_bar;      /* memory port (32-bit,
+						    * non-prefetchable,
+						    * size=8K) */
+
+	/* messaging */
+	spinlock_t		msg_lock;          /* message spinlock */
+	atomic_t	        send_message_locked;
+	struct lx_rmh           rmh;
+
+	/* configuration */
+	uint			freq_ratio : 2;
+	uint                    playback_mute : 1;
+	uint                    hardware_running[2];
+	u32                     board_sample_rate; /* sample rate read from
+						    * board */
+	u32                     sample_rate;	   /* our sample rate */
+	u16                     pcm_granularity;   /* board blocksize */
+
+	/* dma */
+	struct snd_dma_buffer   capture_dma_buf;
+	struct snd_dma_buffer   playback_dma_buf;
+
+	/* pcm */
+	struct snd_pcm         *pcm;
+
+	/* streams */
+	struct lx_stream        capture_stream;
+	struct lx_stream        playback_stream;
+};
+
+
+#endif /* LX6464ES_H */
diff --git a/sound/pci/lx6464es/lx_core.c b/sound/pci/lx6464es/lx_core.c
new file mode 100644
index 0000000..5812780
--- /dev/null
+++ b/sound/pci/lx6464es/lx_core.c
@@ -0,0 +1,1444 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ * low-level interface
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+/* #define RMH_DEBUG 1 */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "lx6464es.h"
+#include "lx_core.h"
+
+/* low-level register access */
+
+static const unsigned long dsp_port_offsets[] = {
+	0,
+	0x400,
+	0x401,
+	0x402,
+	0x403,
+	0x404,
+	0x405,
+	0x406,
+	0x407,
+	0x408,
+	0x409,
+	0x40a,
+	0x40b,
+	0x40c,
+
+	0x410,
+	0x411,
+	0x412,
+	0x413,
+	0x414,
+	0x415,
+	0x416,
+
+	0x420,
+	0x430,
+	0x431,
+	0x432,
+	0x433,
+	0x434,
+	0x440
+};
+
+static void __iomem *lx_dsp_register(struct lx6464es *chip, int port)
+{
+	void __iomem *base_address = chip->port_dsp_bar;
+	return base_address + dsp_port_offsets[port]*4;
+}
+
+unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port)
+{
+	void __iomem *address = lx_dsp_register(chip, port);
+	return ioread32(address);
+}
+
+void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len)
+{
+	void __iomem *address = lx_dsp_register(chip, port);
+	memcpy_fromio(data, address, len*sizeof(u32));
+}
+
+
+void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data)
+{
+	void __iomem *address = lx_dsp_register(chip, port);
+	iowrite32(data, address);
+}
+
+void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data,
+			 u32 len)
+{
+	void __iomem *address = lx_dsp_register(chip, port);
+	memcpy_toio(address, data, len*sizeof(u32));
+}
+
+
+static const unsigned long plx_port_offsets[] = {
+	0x04,
+	0x40,
+	0x44,
+	0x48,
+	0x4c,
+	0x50,
+	0x54,
+	0x58,
+	0x5c,
+	0x64,
+	0x68,
+	0x6C
+};
+
+static void __iomem *lx_plx_register(struct lx6464es *chip, int port)
+{
+	void __iomem *base_address = chip->port_plx_remapped;
+	return base_address + plx_port_offsets[port];
+}
+
+unsigned long lx_plx_reg_read(struct lx6464es *chip, int port)
+{
+	void __iomem *address = lx_plx_register(chip, port);
+	return ioread32(address);
+}
+
+void lx_plx_reg_write(struct lx6464es *chip, int port, u32 data)
+{
+	void __iomem *address = lx_plx_register(chip, port);
+	iowrite32(data, address);
+}
+
+u32 lx_plx_mbox_read(struct lx6464es *chip, int mbox_nr)
+{
+	int index;
+
+	switch (mbox_nr) {
+	case 1:
+		index = ePLX_MBOX1;    break;
+	case 2:
+		index = ePLX_MBOX2;    break;
+	case 3:
+		index = ePLX_MBOX3;    break;
+	case 4:
+		index = ePLX_MBOX4;    break;
+	case 5:
+		index = ePLX_MBOX5;    break;
+	case 6:
+		index = ePLX_MBOX6;    break;
+	case 7:
+		index = ePLX_MBOX7;    break;
+	case 0:			/* reserved for HF flags */
+		snd_BUG();
+	default:
+		return 0xdeadbeef;
+	}
+
+	return lx_plx_reg_read(chip, index);
+}
+
+int lx_plx_mbox_write(struct lx6464es *chip, int mbox_nr, u32 value)
+{
+	int index = -1;
+
+	switch (mbox_nr) {
+	case 1:
+		index = ePLX_MBOX1;    break;
+	case 3:
+		index = ePLX_MBOX3;    break;
+	case 4:
+		index = ePLX_MBOX4;    break;
+	case 5:
+		index = ePLX_MBOX5;    break;
+	case 6:
+		index = ePLX_MBOX6;    break;
+	case 7:
+		index = ePLX_MBOX7;    break;
+	case 0:			/* reserved for HF flags */
+	case 2:			/* reserved for Pipe States
+				 * the DSP keeps an image of it */
+		snd_BUG();
+		return -EBADRQC;
+	}
+
+	lx_plx_reg_write(chip, index, value);
+	return 0;
+}
+
+
+/* rmh */
+
+#ifdef CONFIG_SND_DEBUG
+#define CMD_NAME(a) a
+#else
+#define CMD_NAME(a) NULL
+#endif
+
+#define Reg_CSM_MR			0x00000002
+#define Reg_CSM_MC			0x00000001
+
+struct dsp_cmd_info {
+	u32    dcCodeOp;	/* Op Code of the command (usually 1st 24-bits
+				 * word).*/
+	u16    dcCmdLength;	/* Command length in words of 24 bits.*/
+	u16    dcStatusType;	/* Status type: 0 for fixed length, 1 for
+				 * random. */
+	u16    dcStatusLength;	/* Status length (if fixed).*/
+	char  *dcOpName;
+};
+
+/*
+  Initialization and control data for the Microblaze interface
+  - OpCode:
+    the opcode field of the command set at the proper offset
+  - CmdLength
+    the number of command words
+  - StatusType
+    offset in the status registers: 0 means that the return value may be
+    different from 0, and must be read
+  - StatusLength
+    the number of status words (in addition to the return value)
+*/
+
+static struct dsp_cmd_info dsp_commands[] =
+{
+	{ (CMD_00_INFO_DEBUG << OPCODE_OFFSET)			, 1 /*custom*/
+	  , 1	, 0 /**/		    , CMD_NAME("INFO_DEBUG") },
+	{ (CMD_01_GET_SYS_CFG << OPCODE_OFFSET) 		, 1 /**/
+	  , 1      , 2 /**/		    , CMD_NAME("GET_SYS_CFG") },
+	{ (CMD_02_SET_GRANULARITY << OPCODE_OFFSET)	        , 1 /**/
+	  , 1      , 0 /**/		    , CMD_NAME("SET_GRANULARITY") },
+	{ (CMD_03_SET_TIMER_IRQ << OPCODE_OFFSET)		, 1 /**/
+	  , 1      , 0 /**/		    , CMD_NAME("SET_TIMER_IRQ") },
+	{ (CMD_04_GET_EVENT << OPCODE_OFFSET)			, 1 /**/
+	  , 1      , 0 /*up to 10*/     , CMD_NAME("GET_EVENT") },
+	{ (CMD_05_GET_PIPES << OPCODE_OFFSET)			, 1 /**/
+	  , 1      , 2 /*up to 4*/      , CMD_NAME("GET_PIPES") },
+	{ (CMD_06_ALLOCATE_PIPE << OPCODE_OFFSET)		, 1 /**/
+	  , 0      , 0 /**/		    , CMD_NAME("ALLOCATE_PIPE") },
+	{ (CMD_07_RELEASE_PIPE << OPCODE_OFFSET)		, 1 /**/
+	  , 0      , 0 /**/		    , CMD_NAME("RELEASE_PIPE") },
+	{ (CMD_08_ASK_BUFFERS << OPCODE_OFFSET) 		, 1 /**/
+	  , 1      , MAX_STREAM_BUFFER  , CMD_NAME("ASK_BUFFERS") },
+	{ (CMD_09_STOP_PIPE << OPCODE_OFFSET)			, 1 /**/
+	  , 0      , 0 /*up to 2*/      , CMD_NAME("STOP_PIPE") },
+	{ (CMD_0A_GET_PIPE_SPL_COUNT << OPCODE_OFFSET)	        , 1 /**/
+	  , 1      , 1 /*up to 2*/      , CMD_NAME("GET_PIPE_SPL_COUNT") },
+	{ (CMD_0B_TOGGLE_PIPE_STATE << OPCODE_OFFSET)           , 1 /*up to 5*/
+	  , 1      , 0 /**/		    , CMD_NAME("TOGGLE_PIPE_STATE") },
+	{ (CMD_0C_DEF_STREAM << OPCODE_OFFSET)			, 1 /*up to 4*/
+	  , 1      , 0 /**/		    , CMD_NAME("DEF_STREAM") },
+	{ (CMD_0D_SET_MUTE  << OPCODE_OFFSET)			, 3 /**/
+	  , 1      , 0 /**/		    , CMD_NAME("SET_MUTE") },
+	{ (CMD_0E_GET_STREAM_SPL_COUNT << OPCODE_OFFSET)        , 1/**/
+	  , 1      , 2 /**/		    , CMD_NAME("GET_STREAM_SPL_COUNT") },
+	{ (CMD_0F_UPDATE_BUFFER << OPCODE_OFFSET)		, 3 /*up to 4*/
+	  , 0      , 1 /**/		    , CMD_NAME("UPDATE_BUFFER") },
+	{ (CMD_10_GET_BUFFER << OPCODE_OFFSET)			, 1 /**/
+	  , 1      , 4 /**/		    , CMD_NAME("GET_BUFFER") },
+	{ (CMD_11_CANCEL_BUFFER << OPCODE_OFFSET)		, 1 /**/
+	  , 1      , 1 /*up to 4*/      , CMD_NAME("CANCEL_BUFFER") },
+	{ (CMD_12_GET_PEAK << OPCODE_OFFSET)			, 1 /**/
+	  , 1      , 1 /**/		    , CMD_NAME("GET_PEAK") },
+	{ (CMD_13_SET_STREAM_STATE << OPCODE_OFFSET)	        , 1 /**/
+	  , 1      , 0 /**/		    , CMD_NAME("SET_STREAM_STATE") },
+};
+
+static void lx_message_init(struct lx_rmh *rmh, enum cmd_mb_opcodes cmd)
+{
+	snd_BUG_ON(cmd >= CMD_14_INVALID);
+
+	rmh->cmd[0] = dsp_commands[cmd].dcCodeOp;
+	rmh->cmd_len = dsp_commands[cmd].dcCmdLength;
+	rmh->stat_len = dsp_commands[cmd].dcStatusLength;
+	rmh->dsp_stat = dsp_commands[cmd].dcStatusType;
+	rmh->cmd_idx = cmd;
+	memset(&rmh->cmd[1], 0, (REG_CRM_NUMBER - 1) * sizeof(u32));
+
+#ifdef CONFIG_SND_DEBUG
+	memset(rmh->stat, 0, REG_CRM_NUMBER * sizeof(u32));
+#endif
+#ifdef RMH_DEBUG
+	rmh->cmd_idx = cmd;
+#endif
+}
+
+#ifdef RMH_DEBUG
+#define LXRMH "lx6464es rmh: "
+static void lx_message_dump(struct lx_rmh *rmh)
+{
+	u8 idx = rmh->cmd_idx;
+	int i;
+
+	snd_printk(LXRMH "command %s\n", dsp_commands[idx].dcOpName);
+
+	for (i = 0; i != rmh->cmd_len; ++i)
+		snd_printk(LXRMH "\tcmd[%d] %08x\n", i, rmh->cmd[i]);
+
+	for (i = 0; i != rmh->stat_len; ++i)
+		snd_printk(LXRMH "\tstat[%d]: %08x\n", i, rmh->stat[i]);
+	snd_printk("\n");
+}
+#else
+static inline void lx_message_dump(struct lx_rmh *rmh)
+{}
+#endif
+
+
+
+/* sleep 500 - 100 = 400 times 100us -> the timeout is >= 40 ms */
+#define XILINX_TIMEOUT_MS       40
+#define XILINX_POLL_NO_SLEEP    100
+#define XILINX_POLL_ITERATIONS  150
+
+#if 0 /* not used now */
+static int lx_message_send(struct lx6464es *chip, struct lx_rmh *rmh)
+{
+	u32 reg = ED_DSP_TIMED_OUT;
+	int dwloop;
+	int answer_received;
+
+	if (lx_dsp_reg_read(chip, eReg_CSM) & (Reg_CSM_MC | Reg_CSM_MR)) {
+		snd_printk(KERN_ERR LXP "PIOSendMessage eReg_CSM %x\n", reg);
+		return -EBUSY;
+	}
+
+	/* write command */
+	lx_dsp_reg_writebuf(chip, eReg_CRM1, rmh->cmd, rmh->cmd_len);
+
+	snd_BUG_ON(atomic_read(&chip->send_message_locked) != 0);
+	atomic_set(&chip->send_message_locked, 1);
+
+	/* MicoBlaze gogogo */
+	lx_dsp_reg_write(chip, eReg_CSM, Reg_CSM_MC);
+
+	/* wait for interrupt to answer */
+	for (dwloop = 0; dwloop != XILINX_TIMEOUT_MS; ++dwloop) {
+		answer_received = atomic_read(&chip->send_message_locked);
+		if (answer_received == 0)
+			break;
+		msleep(1);
+	}
+
+	if (answer_received == 0) {
+		/* in Debug mode verify Reg_CSM_MR */
+		snd_BUG_ON(!(lx_dsp_reg_read(chip, eReg_CSM) & Reg_CSM_MR));
+
+		/* command finished, read status */
+		if (rmh->dsp_stat == 0)
+			reg = lx_dsp_reg_read(chip, eReg_CRM1);
+		else
+			reg = 0;
+	} else {
+		int i;
+		snd_printk(KERN_WARNING LXP "TIMEOUT lx_message_send! "
+			   "Interrupts disabled?\n");
+
+		/* attente bit Reg_CSM_MR */
+		for (i = 0; i != XILINX_POLL_ITERATIONS; i++) {
+			if ((lx_dsp_reg_read(chip, eReg_CSM) & Reg_CSM_MR)) {
+				if (rmh->dsp_stat == 0)
+					reg = lx_dsp_reg_read(chip, eReg_CRM1);
+				else
+					reg = 0;
+				goto polling_successful;
+			}
+
+			if (i > XILINX_POLL_NO_SLEEP)
+				msleep(1);
+		}
+		snd_printk(KERN_WARNING LXP "TIMEOUT lx_message_send! "
+			   "polling failed\n");
+
+polling_successful:
+		atomic_set(&chip->send_message_locked, 0);
+	}
+
+	if ((reg & ERROR_VALUE) == 0) {
+		/* read response */
+		if (rmh->stat_len) {
+			snd_BUG_ON(rmh->stat_len >= (REG_CRM_NUMBER-1));
+
+			lx_dsp_reg_readbuf(chip, eReg_CRM2, rmh->stat,
+					   rmh->stat_len);
+		}
+	} else
+		snd_printk(KERN_WARNING LXP "lx_message_send: error_value %x\n",
+			   reg);
+
+	/* clear Reg_CSM_MR */
+	lx_dsp_reg_write(chip, eReg_CSM, 0);
+
+	switch (reg) {
+	case ED_DSP_TIMED_OUT:
+		snd_printk(KERN_WARNING LXP "lx_message_send: dsp timeout\n");
+		return -ETIMEDOUT;
+
+	case ED_DSP_CRASHED:
+		snd_printk(KERN_WARNING LXP "lx_message_send: dsp crashed\n");
+		return -EAGAIN;
+	}
+
+	lx_message_dump(rmh);
+	return 0;
+}
+#endif /* not used now */
+
+static int lx_message_send_atomic(struct lx6464es *chip, struct lx_rmh *rmh)
+{
+	u32 reg = ED_DSP_TIMED_OUT;
+	int dwloop;
+
+	if (lx_dsp_reg_read(chip, eReg_CSM) & (Reg_CSM_MC | Reg_CSM_MR)) {
+		snd_printk(KERN_ERR LXP "PIOSendMessage eReg_CSM %x\n", reg);
+		return -EBUSY;
+	}
+
+	/* write command */
+	lx_dsp_reg_writebuf(chip, eReg_CRM1, rmh->cmd, rmh->cmd_len);
+
+	/* MicoBlaze gogogo */
+	lx_dsp_reg_write(chip, eReg_CSM, Reg_CSM_MC);
+
+	/* wait for interrupt to answer */
+	for (dwloop = 0; dwloop != XILINX_TIMEOUT_MS * 1000; ++dwloop) {
+		if (lx_dsp_reg_read(chip, eReg_CSM) & Reg_CSM_MR) {
+			if (rmh->dsp_stat == 0)
+				reg = lx_dsp_reg_read(chip, eReg_CRM1);
+			else
+				reg = 0;
+			goto polling_successful;
+		} else
+			udelay(1);
+	}
+	snd_printk(KERN_WARNING LXP "TIMEOUT lx_message_send_atomic! "
+		   "polling failed\n");
+
+polling_successful:
+	if ((reg & ERROR_VALUE) == 0) {
+		/* read response */
+		if (rmh->stat_len) {
+			snd_BUG_ON(rmh->stat_len >= (REG_CRM_NUMBER-1));
+			lx_dsp_reg_readbuf(chip, eReg_CRM2, rmh->stat,
+					   rmh->stat_len);
+		}
+	} else
+		snd_printk(LXP "rmh error: %08x\n", reg);
+
+	/* clear Reg_CSM_MR */
+	lx_dsp_reg_write(chip, eReg_CSM, 0);
+
+	switch (reg) {
+	case ED_DSP_TIMED_OUT:
+		snd_printk(KERN_WARNING LXP "lx_message_send: dsp timeout\n");
+		return -ETIMEDOUT;
+
+	case ED_DSP_CRASHED:
+		snd_printk(KERN_WARNING LXP "lx_message_send: dsp crashed\n");
+		return -EAGAIN;
+	}
+
+	lx_message_dump(rmh);
+
+	return reg;
+}
+
+
+/* low-level dsp access */
+int __devinit lx_dsp_get_version(struct lx6464es *chip, u32 *rdsp_version)
+{
+	u16 ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	lx_message_init(&chip->rmh, CMD_01_GET_SYS_CFG);
+	ret = lx_message_send_atomic(chip, &chip->rmh);
+
+	*rdsp_version = chip->rmh.stat[1];
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return ret;
+}
+
+int lx_dsp_get_clock_frequency(struct lx6464es *chip, u32 *rfreq)
+{
+	u16 ret = 0;
+	unsigned long flags;
+	u32 freq_raw = 0;
+	u32 freq = 0;
+	u32 frequency = 0;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	lx_message_init(&chip->rmh, CMD_01_GET_SYS_CFG);
+	ret = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (ret == 0) {
+		freq_raw = chip->rmh.stat[0] >> FREQ_FIELD_OFFSET;
+		freq = freq_raw & XES_FREQ_COUNT8_MASK;
+
+		if ((freq < XES_FREQ_COUNT8_48_MAX) ||
+		    (freq > XES_FREQ_COUNT8_44_MIN))
+			frequency = 0; /* unknown */
+		else if (freq >= XES_FREQ_COUNT8_44_MAX)
+			frequency = 44100;
+		else
+			frequency = 48000;
+	}
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	*rfreq = frequency * chip->freq_ratio;
+
+	return ret;
+}
+
+int lx_dsp_get_mac(struct lx6464es *chip, u8 *mac_address)
+{
+	u32 macmsb, maclsb;
+
+	macmsb = lx_dsp_reg_read(chip, eReg_ADMACESMSB) & 0x00FFFFFF;
+	maclsb = lx_dsp_reg_read(chip, eReg_ADMACESLSB) & 0x00FFFFFF;
+
+	/* todo: endianess handling */
+	mac_address[5] = ((u8 *)(&maclsb))[0];
+	mac_address[4] = ((u8 *)(&maclsb))[1];
+	mac_address[3] = ((u8 *)(&maclsb))[2];
+	mac_address[2] = ((u8 *)(&macmsb))[0];
+	mac_address[1] = ((u8 *)(&macmsb))[1];
+	mac_address[0] = ((u8 *)(&macmsb))[2];
+
+	return 0;
+}
+
+
+int lx_dsp_set_granularity(struct lx6464es *chip, u32 gran)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	lx_message_init(&chip->rmh, CMD_02_SET_GRANULARITY);
+	chip->rmh.cmd[0] |= gran;
+
+	ret = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return ret;
+}
+
+int lx_dsp_read_async_events(struct lx6464es *chip, u32 *data)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	lx_message_init(&chip->rmh, CMD_04_GET_EVENT);
+	chip->rmh.stat_len = 9;	/* we don't necessarily need the full length */
+
+	ret = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (!ret)
+		memcpy(data, chip->rmh.stat, chip->rmh.stat_len * sizeof(u32));
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return ret;
+}
+
+#define CSES_TIMEOUT        100     /* microseconds */
+#define CSES_CE             0x0001
+#define CSES_BROADCAST      0x0002
+#define CSES_UPDATE_LDSV    0x0004
+
+int lx_dsp_es_check_pipeline(struct lx6464es *chip)
+{
+	int i;
+
+	for (i = 0; i != CSES_TIMEOUT; ++i) {
+		/*
+		 * le bit CSES_UPDATE_LDSV est Ã  1 dÃ©s que le macprog
+		 * est pret. il re-passe Ã  0 lorsque le premier read a
+		 * Ã©tÃ© fait. pour l'instant on retire le test car ce bit
+		 * passe a 1 environ 200 Ã  400 ms aprÃ©s que le registre
+		 * confES Ã  Ã©tÃ© Ã©crit (kick du xilinx ES).
+		 *
+		 * On ne teste que le bit CE.
+		 * */
+
+		u32 cses = lx_dsp_reg_read(chip, eReg_CSES);
+
+		if ((cses & CSES_CE) == 0)
+			return 0;
+
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+
+#define PIPE_INFO_TO_CMD(capture, pipe)					\
+	((u32)((u32)(pipe) | ((capture) ? ID_IS_CAPTURE : 0L)) << ID_OFFSET)
+
+
+
+/* low-level pipe handling */
+int lx_pipe_allocate(struct lx6464es *chip, u32 pipe, int is_capture,
+		     int channels)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_06_ALLOCATE_PIPE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= channels;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	if (err != 0)
+		snd_printk(KERN_ERR "lx6464es: could not allocate pipe\n");
+
+	return err;
+}
+
+int lx_pipe_release(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_07_RELEASE_PIPE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	return err;
+}
+
+int lx_buffer_ask(struct lx6464es *chip, u32 pipe, int is_capture,
+		  u32 *r_needed, u32 *r_freed, u32 *size_array)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+#ifdef CONFIG_SND_DEBUG
+	if (size_array)
+		memset(size_array, 0, sizeof(u32)*MAX_STREAM_BUFFER);
+#endif
+
+	*r_needed = 0;
+	*r_freed = 0;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_08_ASK_BUFFERS);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (!err) {
+		int i;
+		for (i = 0; i < MAX_STREAM_BUFFER; ++i) {
+			u32 stat = chip->rmh.stat[i];
+			if (stat & (BF_EOB << BUFF_FLAGS_OFFSET)) {
+				/* finished */
+				*r_freed += 1;
+				if (size_array)
+					size_array[i] = stat & MASK_DATA_SIZE;
+			} else if ((stat & (BF_VALID << BUFF_FLAGS_OFFSET))
+				   == 0)
+				/* free */
+				*r_needed += 1;
+		}
+
+#if 0
+		snd_printdd(LXP "CMD_08_ASK_BUFFERS: needed %d, freed %d\n",
+			    *r_needed, *r_freed);
+		for (i = 0; i < MAX_STREAM_BUFFER; ++i) {
+			for (i = 0; i != chip->rmh.stat_len; ++i)
+				snd_printdd("  stat[%d]: %x, %x\n", i,
+					    chip->rmh.stat[i],
+					    chip->rmh.stat[i] & MASK_DATA_SIZE);
+		}
+#endif
+	}
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+
+int lx_pipe_stop(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_09_STOP_PIPE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+static int lx_pipe_toggle_state(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0B_TOGGLE_PIPE_STATE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+
+int lx_pipe_start(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err;
+
+	err = lx_pipe_wait_for_idle(chip, pipe, is_capture);
+	if (err < 0)
+		return err;
+
+	err = lx_pipe_toggle_state(chip, pipe, is_capture);
+
+	return err;
+}
+
+int lx_pipe_pause(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err = 0;
+
+	err = lx_pipe_wait_for_start(chip, pipe, is_capture);
+	if (err < 0)
+		return err;
+
+	err = lx_pipe_toggle_state(chip, pipe, is_capture);
+
+	return err;
+}
+
+
+int lx_pipe_sample_count(struct lx6464es *chip, u32 pipe, int is_capture,
+			 u64 *rsample_count)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0A_GET_PIPE_SPL_COUNT);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.stat_len = 2;	/* need all words here! */
+
+	err = lx_message_send_atomic(chip, &chip->rmh); /* don't sleep! */
+
+	if (err != 0)
+		snd_printk(KERN_ERR
+			   "lx6464es: could not query pipe's sample count\n");
+	else {
+		*rsample_count = ((u64)(chip->rmh.stat[0] & MASK_SPL_COUNT_HI)
+				  << 24)     /* hi part */
+			+ chip->rmh.stat[1]; /* lo part */
+	}
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+int lx_pipe_state(struct lx6464es *chip, u32 pipe, int is_capture, u16 *rstate)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0A_GET_PIPE_SPL_COUNT);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (err != 0)
+		snd_printk(KERN_ERR "lx6464es: could not query pipe's state\n");
+	else
+		*rstate = (chip->rmh.stat[0] >> PSTATE_OFFSET) & 0x0F;
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+static int lx_pipe_wait_for_state(struct lx6464es *chip, u32 pipe,
+				  int is_capture, u16 state)
+{
+	int i;
+
+	/* max 2*PCMOnlyGranularity = 2*1024 at 44100 = < 50 ms:
+	 * timeout 50 ms */
+	for (i = 0; i != 50; ++i) {
+		u16 current_state;
+		int err = lx_pipe_state(chip, pipe, is_capture, &current_state);
+
+		if (err < 0)
+			return err;
+
+		if (current_state == state)
+			return 0;
+
+		mdelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+int lx_pipe_wait_for_start(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	return lx_pipe_wait_for_state(chip, pipe, is_capture, PSTATE_RUN);
+}
+
+int lx_pipe_wait_for_idle(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	return lx_pipe_wait_for_state(chip, pipe, is_capture, PSTATE_IDLE);
+}
+
+/* low-level stream handling */
+int lx_stream_set_state(struct lx6464es *chip, u32 pipe,
+			       int is_capture, enum stream_state_t state)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_13_SET_STREAM_STATE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= state;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	return err;
+}
+
+int lx_stream_set_format(struct lx6464es *chip, struct snd_pcm_runtime *runtime,
+			 u32 pipe, int is_capture)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	u32 channels = runtime->channels;
+
+	if (runtime->channels != channels)
+		snd_printk(KERN_ERR LXP "channel count mismatch: %d vs %d",
+			   runtime->channels, channels);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0C_DEF_STREAM);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	if (runtime->sample_bits == 16)
+		/* 16 bit format */
+		chip->rmh.cmd[0] |= (STREAM_FMT_16b << STREAM_FMT_OFFSET);
+
+	if (snd_pcm_format_little_endian(runtime->format))
+		/* little endian/intel format */
+		chip->rmh.cmd[0] |= (STREAM_FMT_intel << STREAM_FMT_OFFSET);
+
+	chip->rmh.cmd[0] |= channels-1;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	return err;
+}
+
+int lx_stream_state(struct lx6464es *chip, u32 pipe, int is_capture,
+		    int *rstate)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0E_GET_STREAM_SPL_COUNT);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	*rstate = (chip->rmh.stat[0] & SF_START) ? START_STATE : PAUSE_STATE;
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+int lx_stream_sample_position(struct lx6464es *chip, u32 pipe, int is_capture,
+			      u64 *r_bytepos)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0E_GET_STREAM_SPL_COUNT);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	*r_bytepos = ((u64) (chip->rmh.stat[0] & MASK_SPL_COUNT_HI)
+		      << 32)	     /* hi part */
+		+ chip->rmh.stat[1]; /* lo part */
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+/* low-level buffer handling */
+int lx_buffer_give(struct lx6464es *chip, u32 pipe, int is_capture,
+		   u32 buffer_size, u32 buf_address_lo, u32 buf_address_hi,
+		   u32 *r_buffer_index)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0F_UPDATE_BUFFER);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= BF_NOTIFY_EOB; /* request interrupt notification */
+
+	/* todo: pause request, circular buffer */
+
+	chip->rmh.cmd[1] = buffer_size & MASK_DATA_SIZE;
+	chip->rmh.cmd[2] = buf_address_lo;
+
+	if (buf_address_hi) {
+		chip->rmh.cmd_len = 4;
+		chip->rmh.cmd[3] = buf_address_hi;
+		chip->rmh.cmd[0] |= BF_64BITS_ADR;
+	}
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (err == 0) {
+		*r_buffer_index = chip->rmh.stat[0];
+		goto done;
+	}
+
+	if (err == EB_RBUFFERS_TABLE_OVERFLOW)
+		snd_printk(LXP "lx_buffer_give EB_RBUFFERS_TABLE_OVERFLOW\n");
+
+	if (err == EB_INVALID_STREAM)
+		snd_printk(LXP "lx_buffer_give EB_INVALID_STREAM\n");
+
+	if (err == EB_CMD_REFUSED)
+		snd_printk(LXP "lx_buffer_give EB_CMD_REFUSED\n");
+
+ done:
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+int lx_buffer_free(struct lx6464es *chip, u32 pipe, int is_capture,
+		   u32 *r_buffer_size)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_11_CANCEL_BUFFER);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= MASK_BUFFER_ID; /* ask for the current buffer: the
+					     * microblaze will seek for it */
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (err == 0)
+		*r_buffer_size = chip->rmh.stat[0]  & MASK_DATA_SIZE;
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+int lx_buffer_cancel(struct lx6464es *chip, u32 pipe, int is_capture,
+		     u32 buffer_index)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_11_CANCEL_BUFFER);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= buffer_index;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+
+/* low-level gain/peak handling
+ *
+ * \todo: can we unmute capture/playback channels independently?
+ *
+ * */
+int lx_level_unmute(struct lx6464es *chip, int is_capture, int unmute)
+{
+	int err;
+	unsigned long flags;
+
+	/* bit set to 1: channel muted */
+	u64 mute_mask = unmute ? 0 : 0xFFFFFFFFFFFFFFFFLLU;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0D_SET_MUTE);
+
+	chip->rmh.cmd[0] |= PIPE_INFO_TO_CMD(is_capture, 0);
+
+	chip->rmh.cmd[1] = (u32)(mute_mask >> (u64)32);	       /* hi part */
+	chip->rmh.cmd[2] = (u32)(mute_mask & (u64)0xFFFFFFFF); /* lo part */
+
+	snd_printk("mute %x %x %x\n", chip->rmh.cmd[0], chip->rmh.cmd[1],
+		   chip->rmh.cmd[2]);
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+static u32 peak_map[] = {
+	0x00000109, /* -90.308dB */
+	0x0000083B, /* -72.247dB */
+	0x000020C4, /* -60.205dB */
+	0x00008273, /* -48.030dB */
+	0x00020756, /* -36.005dB */
+	0x00040C37, /* -30.001dB */
+	0x00081385, /* -24.002dB */
+	0x00101D3F, /* -18.000dB */
+	0x0016C310, /* -15.000dB */
+	0x002026F2, /* -12.001dB */
+	0x002D6A86, /* -9.000dB */
+	0x004026E6, /* -6.004dB */
+	0x005A9DF6, /* -3.000dB */
+	0x0065AC8B, /* -2.000dB */
+	0x00721481, /* -1.000dB */
+	0x007FFFFF, /* FS */
+};
+
+int lx_level_peaks(struct lx6464es *chip, int is_capture, int channels,
+		   u32 *r_levels)
+{
+	int err = 0;
+	unsigned long flags;
+	int i;
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	for (i = 0; i < channels; i += 4) {
+		u32 s0, s1, s2, s3;
+
+		lx_message_init(&chip->rmh, CMD_12_GET_PEAK);
+		chip->rmh.cmd[0] |= PIPE_INFO_TO_CMD(is_capture, i);
+
+		err = lx_message_send_atomic(chip, &chip->rmh);
+
+		if (err == 0) {
+			s0 = peak_map[chip->rmh.stat[0] & 0x0F];
+			s1 = peak_map[(chip->rmh.stat[0] >>  4) & 0xf];
+			s2 = peak_map[(chip->rmh.stat[0] >>  8) & 0xf];
+			s3 = peak_map[(chip->rmh.stat[0] >>  12) & 0xf];
+		} else
+			s0 = s1 = s2 = s3 = 0;
+
+		r_levels[0] = s0;
+		r_levels[1] = s1;
+		r_levels[2] = s2;
+		r_levels[3] = s3;
+
+		r_levels += 4;
+	}
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+/* interrupt handling */
+#define PCX_IRQ_NONE 0
+#define IRQCS_ACTIVE_PCIDB  0x00002000L         /* Bit nÃÂ¸ 13 */
+#define IRQCS_ENABLE_PCIIRQ 0x00000100L         /* Bit nÃÂ¸ 08 */
+#define IRQCS_ENABLE_PCIDB  0x00000200L         /* Bit nÃÂ¸ 09 */
+
+static u32 lx_interrupt_test_ack(struct lx6464es *chip)
+{
+	u32 irqcs = lx_plx_reg_read(chip, ePLX_IRQCS);
+
+	/* Test if PCI Doorbell interrupt is active */
+	if (irqcs & IRQCS_ACTIVE_PCIDB)	{
+		u32 temp;
+		irqcs = PCX_IRQ_NONE;
+
+		while ((temp = lx_plx_reg_read(chip, ePLX_L2PCIDB))) {
+			/* RAZ interrupt */
+			irqcs |= temp;
+			lx_plx_reg_write(chip, ePLX_L2PCIDB, temp);
+		}
+
+		return irqcs;
+	}
+	return PCX_IRQ_NONE;
+}
+
+static int lx_interrupt_ack(struct lx6464es *chip, u32 *r_irqsrc,
+			    int *r_async_pending, int *r_async_escmd)
+{
+	u32 irq_async;
+	u32 irqsrc = lx_interrupt_test_ack(chip);
+
+	if (irqsrc == PCX_IRQ_NONE)
+		return 0;
+
+	*r_irqsrc = irqsrc;
+
+	irq_async = irqsrc & MASK_SYS_ASYNC_EVENTS; /* + EtherSound response
+						     * (set by xilinx) + EOB */
+
+	if (irq_async & MASK_SYS_STATUS_ESA) {
+		irq_async &= ~MASK_SYS_STATUS_ESA;
+		*r_async_escmd = 1;
+	}
+
+	if (irqsrc & MASK_SYS_STATUS_CMD_DONE)
+		/* xilinx command notification */
+		atomic_set(&chip->send_message_locked, 0);
+
+	if (irq_async) {
+		/* snd_printd("interrupt: async event pending\n"); */
+		*r_async_pending = 1;
+	}
+
+	return 1;
+}
+
+static int lx_interrupt_handle_async_events(struct lx6464es *chip, u32 irqsrc,
+					    int *r_freq_changed,
+					    u64 *r_notified_in_pipe_mask,
+					    u64 *r_notified_out_pipe_mask)
+{
+	int err;
+	u32 stat[9];		/* answer from CMD_04_GET_EVENT */
+
+	/* On peut optimiser pour ne pas lire les evenements vides
+	 * les mots de rÃÂ©ponse sont dans l'ordre suivant :
+	 * Stat[0]	mot de status gÃÂ©nÃÂ©ral
+	 * Stat[1]	fin de buffer OUT pF
+	 * Stat[2]	fin de buffer OUT pf
+	 * Stat[3]	fin de buffer IN pF
+	 * Stat[4]	fin de buffer IN pf
+	 * Stat[5]	underrun poid fort
+	 * Stat[6]	underrun poid faible
+	 * Stat[7]	overrun poid fort
+	 * Stat[8]	overrun poid faible
+	 * */
+
+	u64 orun_mask;
+	u64 urun_mask;
+#if 0
+	int has_underrun   = (irqsrc & MASK_SYS_STATUS_URUN) ? 1 : 0;
+	int has_overrun    = (irqsrc & MASK_SYS_STATUS_ORUN) ? 1 : 0;
+#endif
+	int eb_pending_out = (irqsrc & MASK_SYS_STATUS_EOBO) ? 1 : 0;
+	int eb_pending_in  = (irqsrc & MASK_SYS_STATUS_EOBI) ? 1 : 0;
+
+	*r_freq_changed = (irqsrc & MASK_SYS_STATUS_FREQ) ? 1 : 0;
+
+	err = lx_dsp_read_async_events(chip, stat);
+	if (err < 0)
+		return err;
+
+	if (eb_pending_in) {
+		*r_notified_in_pipe_mask = ((u64)stat[3] << 32)
+			+ stat[4];
+		snd_printdd(LXP "interrupt: EOBI pending %llx\n",
+			    *r_notified_in_pipe_mask);
+	}
+	if (eb_pending_out) {
+		*r_notified_out_pipe_mask = ((u64)stat[1] << 32)
+			+ stat[2];
+		snd_printdd(LXP "interrupt: EOBO pending %llx\n",
+			    *r_notified_out_pipe_mask);
+	}
+
+	orun_mask = ((u64)stat[7] << 32) + stat[8];
+	urun_mask = ((u64)stat[5] << 32) + stat[6];
+
+	/* todo: handle xrun notification */
+
+	return err;
+}
+
+static int lx_interrupt_request_new_buffer(struct lx6464es *chip,
+					   struct lx_stream *lx_stream)
+{
+	struct snd_pcm_substream *substream = lx_stream->stream;
+	int is_capture = lx_stream->is_capture;
+	int err;
+	unsigned long flags;
+
+	const u32 channels = substream->runtime->channels;
+	const u32 bytes_per_frame = channels * 3;
+	const u32 period_size = substream->runtime->period_size;
+	const u32 period_bytes = period_size * bytes_per_frame;
+	const u32 pos = lx_stream->frame_pos;
+	const u32 next_pos = ((pos+1) == substream->runtime->periods) ?
+		0 : pos + 1;
+
+	dma_addr_t buf = substream->dma_buffer.addr + pos * period_bytes;
+	u32 buf_hi = 0;
+	u32 buf_lo = 0;
+	u32 buffer_index = 0;
+
+	u32 needed, freed;
+	u32 size_array[MAX_STREAM_BUFFER];
+
+	snd_printdd("->lx_interrupt_request_new_buffer\n");
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	err = lx_buffer_ask(chip, 0, is_capture, &needed, &freed, size_array);
+	snd_printdd(LXP "interrupt: needed %d, freed %d\n", needed, freed);
+
+	unpack_pointer(buf, &buf_lo, &buf_hi);
+	err = lx_buffer_give(chip, 0, is_capture, period_bytes, buf_lo, buf_hi,
+			     &buffer_index);
+	snd_printdd(LXP "interrupt: gave buffer index %x on %p (%d bytes)\n",
+		    buffer_index, (void *)buf, period_bytes);
+
+	lx_stream->frame_pos = next_pos;
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return err;
+}
+
+void lx_tasklet_playback(unsigned long data)
+{
+	struct lx6464es *chip = (struct lx6464es *)data;
+	struct lx_stream *lx_stream = &chip->playback_stream;
+	int err;
+
+	snd_printdd("->lx_tasklet_playback\n");
+
+	err = lx_interrupt_request_new_buffer(chip, lx_stream);
+	if (err < 0)
+		snd_printk(KERN_ERR LXP
+			   "cannot request new buffer for playback\n");
+
+	snd_pcm_period_elapsed(lx_stream->stream);
+}
+
+void lx_tasklet_capture(unsigned long data)
+{
+	struct lx6464es *chip = (struct lx6464es *)data;
+	struct lx_stream *lx_stream = &chip->capture_stream;
+	int err;
+
+	snd_printdd("->lx_tasklet_capture\n");
+	err = lx_interrupt_request_new_buffer(chip, lx_stream);
+	if (err < 0)
+		snd_printk(KERN_ERR LXP
+			   "cannot request new buffer for capture\n");
+
+	snd_pcm_period_elapsed(lx_stream->stream);
+}
+
+
+
+static int lx_interrupt_handle_audio_transfer(struct lx6464es *chip,
+					      u64 notified_in_pipe_mask,
+					      u64 notified_out_pipe_mask)
+{
+	int err = 0;
+
+	if (notified_in_pipe_mask) {
+		snd_printdd(LXP "requesting audio transfer for capture\n");
+		tasklet_hi_schedule(&chip->tasklet_capture);
+	}
+
+	if (notified_out_pipe_mask) {
+		snd_printdd(LXP "requesting audio transfer for playback\n");
+		tasklet_hi_schedule(&chip->tasklet_playback);
+	}
+
+	return err;
+}
+
+
+irqreturn_t lx_interrupt(int irq, void *dev_id)
+{
+	struct lx6464es *chip = dev_id;
+	int async_pending, async_escmd;
+	u32 irqsrc;
+
+	spin_lock(&chip->lock);
+
+	snd_printdd("**************************************************\n");
+
+	if (!lx_interrupt_ack(chip, &irqsrc, &async_pending, &async_escmd)) {
+		spin_unlock(&chip->lock);
+		snd_printdd("IRQ_NONE\n");
+		return IRQ_NONE; /* this device did not cause the interrupt */
+	}
+
+	if (irqsrc & MASK_SYS_STATUS_CMD_DONE)
+		goto exit;
+
+#if 0
+	if (irqsrc & MASK_SYS_STATUS_EOBI)
+		snd_printdd(LXP "interrupt: EOBI\n");
+
+	if (irqsrc & MASK_SYS_STATUS_EOBO)
+		snd_printdd(LXP "interrupt: EOBO\n");
+
+	if (irqsrc & MASK_SYS_STATUS_URUN)
+		snd_printdd(LXP "interrupt: URUN\n");
+
+	if (irqsrc & MASK_SYS_STATUS_ORUN)
+		snd_printdd(LXP "interrupt: ORUN\n");
+#endif
+
+	if (async_pending) {
+		u64 notified_in_pipe_mask = 0;
+		u64 notified_out_pipe_mask = 0;
+		int freq_changed;
+		int err;
+
+		/* handle async events */
+		err = lx_interrupt_handle_async_events(chip, irqsrc,
+						       &freq_changed,
+						       &notified_in_pipe_mask,
+						       &notified_out_pipe_mask);
+		if (err)
+			snd_printk(KERN_ERR LXP
+				   "error handling async events\n");
+
+		err = lx_interrupt_handle_audio_transfer(chip,
+							 notified_in_pipe_mask,
+							 notified_out_pipe_mask
+			);
+		if (err)
+			snd_printk(KERN_ERR LXP
+				   "error during audio transfer\n");
+	}
+
+	if (async_escmd) {
+#if 0
+		/* backdoor for ethersound commands
+		 *
+		 * for now, we do not need this
+		 *
+		 * */
+
+		snd_printdd("lx6464es: interrupt requests escmd handling\n");
+#endif
+	}
+
+exit:
+	spin_unlock(&chip->lock);
+	return IRQ_HANDLED;	/* this device caused the interrupt */
+}
+
+
+static void lx_irq_set(struct lx6464es *chip, int enable)
+{
+	u32 reg = lx_plx_reg_read(chip, ePLX_IRQCS);
+
+	/* enable/disable interrupts
+	 *
+	 * Set the Doorbell and PCI interrupt enable bits
+	 *
+	 * */
+	if (enable)
+		reg |=  (IRQCS_ENABLE_PCIIRQ | IRQCS_ENABLE_PCIDB);
+	else
+		reg &= ~(IRQCS_ENABLE_PCIIRQ | IRQCS_ENABLE_PCIDB);
+	lx_plx_reg_write(chip, ePLX_IRQCS, reg);
+}
+
+void lx_irq_enable(struct lx6464es *chip)
+{
+	snd_printdd("->lx_irq_enable\n");
+	lx_irq_set(chip, 1);
+}
+
+void lx_irq_disable(struct lx6464es *chip)
+{
+	snd_printdd("->lx_irq_disable\n");
+	lx_irq_set(chip, 0);
+}
diff --git a/sound/pci/lx6464es/lx_core.h b/sound/pci/lx6464es/lx_core.h
new file mode 100644
index 0000000..6bd9cbb
--- /dev/null
+++ b/sound/pci/lx6464es/lx_core.h
@@ -0,0 +1,242 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ * low-level interface
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+#ifndef LX_CORE_H
+#define LX_CORE_H
+
+#include <linux/interrupt.h>
+
+#include "lx_defs.h"
+
+#define REG_CRM_NUMBER		12
+
+struct lx6464es;
+
+/* low-level register access */
+
+/* dsp register access */
+enum {
+	eReg_BASE,
+	eReg_CSM,
+	eReg_CRM1,
+	eReg_CRM2,
+	eReg_CRM3,
+	eReg_CRM4,
+	eReg_CRM5,
+	eReg_CRM6,
+	eReg_CRM7,
+	eReg_CRM8,
+	eReg_CRM9,
+	eReg_CRM10,
+	eReg_CRM11,
+	eReg_CRM12,
+
+	eReg_ICR,
+	eReg_CVR,
+	eReg_ISR,
+	eReg_RXHTXH,
+	eReg_RXMTXM,
+	eReg_RHLTXL,
+	eReg_RESETDSP,
+
+	eReg_CSUF,
+	eReg_CSES,
+	eReg_CRESMSB,
+	eReg_CRESLSB,
+	eReg_ADMACESMSB,
+	eReg_ADMACESLSB,
+	eReg_CONFES,
+
+	eMaxPortLx
+};
+
+unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port);
+void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len);
+void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data);
+void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data,
+			 u32 len);
+
+/* plx register access */
+enum {
+    ePLX_PCICR,
+
+    ePLX_MBOX0,
+    ePLX_MBOX1,
+    ePLX_MBOX2,
+    ePLX_MBOX3,
+    ePLX_MBOX4,
+    ePLX_MBOX5,
+    ePLX_MBOX6,
+    ePLX_MBOX7,
+
+    ePLX_L2PCIDB,
+    ePLX_IRQCS,
+    ePLX_CHIPSC,
+
+    eMaxPort
+};
+
+unsigned long lx_plx_reg_read(struct lx6464es *chip, int port);
+void lx_plx_reg_write(struct lx6464es *chip, int port, u32 data);
+
+/* rhm */
+struct lx_rmh {
+	u16	cmd_len;	/* length of the command to send (WORDs) */
+	u16	stat_len;	/* length of the status received (WORDs) */
+	u16	dsp_stat;	/* status type, RMP_SSIZE_XXX */
+	u16	cmd_idx;	/* index of the command */
+	u32	cmd[REG_CRM_NUMBER];
+	u32	stat[REG_CRM_NUMBER];
+};
+
+
+/* low-level dsp access */
+int __devinit lx_dsp_get_version(struct lx6464es *chip, u32 *rdsp_version);
+int lx_dsp_get_clock_frequency(struct lx6464es *chip, u32 *rfreq);
+int lx_dsp_set_granularity(struct lx6464es *chip, u32 gran);
+int lx_dsp_read_async_events(struct lx6464es *chip, u32 *data);
+int lx_dsp_get_mac(struct lx6464es *chip, u8 *mac_address);
+
+
+/* low-level pipe handling */
+int lx_pipe_allocate(struct lx6464es *chip, u32 pipe, int is_capture,
+		     int channels);
+int lx_pipe_release(struct lx6464es *chip, u32 pipe, int is_capture);
+int lx_pipe_sample_count(struct lx6464es *chip, u32 pipe, int is_capture,
+			 u64 *rsample_count);
+int lx_pipe_state(struct lx6464es *chip, u32 pipe, int is_capture, u16 *rstate);
+int lx_pipe_stop(struct lx6464es *chip, u32 pipe, int is_capture);
+int lx_pipe_start(struct lx6464es *chip, u32 pipe, int is_capture);
+int lx_pipe_pause(struct lx6464es *chip, u32 pipe, int is_capture);
+
+int lx_pipe_wait_for_start(struct lx6464es *chip, u32 pipe, int is_capture);
+int lx_pipe_wait_for_idle(struct lx6464es *chip, u32 pipe, int is_capture);
+
+/* low-level stream handling */
+int lx_stream_set_format(struct lx6464es *chip, struct snd_pcm_runtime *runtime,
+			 u32 pipe, int is_capture);
+int lx_stream_state(struct lx6464es *chip, u32 pipe, int is_capture,
+		    int *rstate);
+int lx_stream_sample_position(struct lx6464es *chip, u32 pipe, int is_capture,
+			      u64 *r_bytepos);
+
+int lx_stream_set_state(struct lx6464es *chip, u32 pipe,
+			int is_capture, enum stream_state_t state);
+
+static inline int lx_stream_start(struct lx6464es *chip, u32 pipe,
+				  int is_capture)
+{
+	snd_printdd("->lx_stream_start\n");
+	return lx_stream_set_state(chip, pipe, is_capture, SSTATE_RUN);
+}
+
+static inline int lx_stream_pause(struct lx6464es *chip, u32 pipe,
+				  int is_capture)
+{
+	snd_printdd("->lx_stream_pause\n");
+	return lx_stream_set_state(chip, pipe, is_capture, SSTATE_PAUSE);
+}
+
+static inline int lx_stream_stop(struct lx6464es *chip, u32 pipe,
+				 int is_capture)
+{
+	snd_printdd("->lx_stream_stop\n");
+	return lx_stream_set_state(chip, pipe, is_capture, SSTATE_STOP);
+}
+
+/* low-level buffer handling */
+int lx_buffer_ask(struct lx6464es *chip, u32 pipe, int is_capture,
+		  u32 *r_needed, u32 *r_freed, u32 *size_array);
+int lx_buffer_give(struct lx6464es *chip, u32 pipe, int is_capture,
+		   u32 buffer_size, u32 buf_address_lo, u32 buf_address_hi,
+		   u32 *r_buffer_index);
+int lx_buffer_free(struct lx6464es *chip, u32 pipe, int is_capture,
+		   u32 *r_buffer_size);
+int lx_buffer_cancel(struct lx6464es *chip, u32 pipe, int is_capture,
+		     u32 buffer_index);
+
+/* low-level gain/peak handling */
+int lx_level_unmute(struct lx6464es *chip, int is_capture, int unmute);
+int lx_level_peaks(struct lx6464es *chip, int is_capture, int channels,
+		   u32 *r_levels);
+
+
+/* interrupt handling */
+irqreturn_t lx_interrupt(int irq, void *dev_id);
+void lx_irq_enable(struct lx6464es *chip);
+void lx_irq_disable(struct lx6464es *chip);
+
+void lx_tasklet_capture(unsigned long data);
+void lx_tasklet_playback(unsigned long data);
+
+
+/* Stream Format Header Defines (for LIN and IEEE754) */
+#define HEADER_FMT_BASE		HEADER_FMT_BASE_LIN
+#define HEADER_FMT_BASE_LIN	0xFED00000
+#define HEADER_FMT_BASE_FLOAT	0xFAD00000
+#define HEADER_FMT_MONO		0x00000080 /* bit 23 in header_lo. WARNING: old
+					    * bit 22 is ignored in float
+					    * format */
+#define HEADER_FMT_INTEL	0x00008000
+#define HEADER_FMT_16BITS	0x00002000
+#define HEADER_FMT_24BITS	0x00004000
+#define HEADER_FMT_UPTO11	0x00000200 /* frequency is less or equ. to 11k.
+					    * */
+#define HEADER_FMT_UPTO32	0x00000100 /* frequency is over 11k and less
+					    * then 32k.*/
+
+
+#define BIT_FMP_HEADER          23
+#define BIT_FMP_SD              22
+#define BIT_FMP_MULTICHANNEL    19
+
+#define START_STATE             1
+#define PAUSE_STATE             0
+
+
+
+
+
+/* from PcxAll_e.h */
+/* Start/Pause condition for pipes (PCXStartPipe, PCXPausePipe) */
+#define START_PAUSE_IMMEDIATE           0
+#define START_PAUSE_ON_SYNCHRO          1
+#define START_PAUSE_ON_TIME_CODE        2
+
+
+/* Pipe / Stream state */
+#define START_STATE             1
+#define PAUSE_STATE             0
+
+static inline void unpack_pointer(dma_addr_t ptr, u32 *r_low, u32 *r_high)
+{
+	*r_low = (u32)(ptr & 0xffffffff);
+#if BITS_PER_LONG == 32
+	*r_high = 0;
+#else
+	*r_high = (u32)((u64)ptr>>32);
+#endif
+}
+
+#endif /* LX_CORE_H */
diff --git a/sound/pci/lx6464es/lx_defs.h b/sound/pci/lx6464es/lx_defs.h
new file mode 100644
index 0000000..49d36bd
--- /dev/null
+++ b/sound/pci/lx6464es/lx_defs.h
@@ -0,0 +1,376 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ * adapted upstream headers
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+#ifndef LX_DEFS_H
+#define LX_DEFS_H
+
+/* code adapted from ethersound.h */
+#define	XES_FREQ_COUNT8_MASK    0x00001FFF /* compteur 25MHz entre 8 ech. */
+#define	XES_FREQ_COUNT8_44_MIN  0x00001288 /* 25M /
+					    * [ 44k - ( 44.1k + 48k ) / 2 ]
+					    * * 8 */
+#define	XES_FREQ_COUNT8_44_MAX	0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ]
+					    * * 8 */
+#define	XES_FREQ_COUNT8_48_MAX	0x00000F08 /* 25M /
+					    * [ 48k + ( 44.1k + 48k ) / 2 ]
+					    * * 8 */
+
+/* code adapted from LXES_registers.h */
+
+#define IOCR_OUTPUTS_OFFSET 0	/* (rw) offset for the number of OUTs in the
+				 * ConfES register. */
+#define IOCR_INPUTS_OFFSET  8	/* (rw) offset for the number of INs in the
+				 * ConfES register. */
+#define FREQ_RATIO_OFFSET  19	/* (rw) offset for frequency ratio in the
+				 * ConfES register. */
+#define	FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio:
+				     * sample rate = frequency rate. */
+
+#define CONFES_READ_PART_MASK	0x00070000
+#define CONFES_WRITE_PART_MASK	0x00F80000
+
+/* code adapted from if_drv_mb.h */
+
+#define MASK_SYS_STATUS_ERROR	(1L << 31) /* events that lead to a PCI irq if
+					    * not yet pending */
+#define MASK_SYS_STATUS_URUN	(1L << 30)
+#define MASK_SYS_STATUS_ORUN	(1L << 29)
+#define MASK_SYS_STATUS_EOBO	(1L << 28)
+#define MASK_SYS_STATUS_EOBI	(1L << 27)
+#define MASK_SYS_STATUS_FREQ	(1L << 26)
+#define MASK_SYS_STATUS_ESA	(1L << 25) /* reserved, this is set by the
+					    * XES */
+#define MASK_SYS_STATUS_TIMER	(1L << 24)
+
+#define MASK_SYS_ASYNC_EVENTS	(MASK_SYS_STATUS_ERROR |		\
+				 MASK_SYS_STATUS_URUN  |		\
+				 MASK_SYS_STATUS_ORUN  |		\
+				 MASK_SYS_STATUS_EOBO  |		\
+				 MASK_SYS_STATUS_EOBI  |		\
+				 MASK_SYS_STATUS_FREQ  |		\
+				 MASK_SYS_STATUS_ESA)
+
+#define MASK_SYS_PCI_EVENTS		(MASK_SYS_ASYNC_EVENTS |	\
+					 MASK_SYS_STATUS_TIMER)
+
+#define MASK_SYS_TIMER_COUNT	0x0000FFFF
+
+#define MASK_SYS_STATUS_EOT_PLX		(1L << 22) /* event that remains
+						    * internal: reserved fo end
+						    * of plx dma */
+#define MASK_SYS_STATUS_XES		(1L << 21) /* event that remains
+						    * internal: pending XES
+						    * IRQ */
+#define MASK_SYS_STATUS_CMD_DONE	(1L << 20) /* alternate command
+						    * management: notify driver
+						    * instead of polling */
+
+
+#define MAX_STREAM_BUFFER 5	/* max amount of stream buffers. */
+
+#define MICROBLAZE_IBL_MIN		 32
+#define MICROBLAZE_IBL_DEFAULT	        128
+#define MICROBLAZE_IBL_MAX		512
+/* #define MASK_GRANULARITY		(2*MICROBLAZE_IBL_MAX-1) */
+
+
+
+/* command opcodes, see reference for details */
+
+/*
+ the capture bit position in the object_id field in driver commands
+ depends upon the number of managed channels. For now, 64 IN + 64 OUT are
+ supported. HOwever, the communication protocol forsees 1024 channels, hence
+ bit 10 indicates a capture (input) object).
+*/
+#define ID_IS_CAPTURE (1L << 10)
+#define ID_OFFSET	13	/* object ID is at the 13th bit in the
+				 * 1st command word.*/
+#define ID_CH_MASK    0x3F
+#define OPCODE_OFFSET	24	/* offset of the command opcode in the first
+				 * command word.*/
+
+enum cmd_mb_opcodes {
+	CMD_00_INFO_DEBUG	        = 0x00,
+	CMD_01_GET_SYS_CFG		= 0x01,
+	CMD_02_SET_GRANULARITY		= 0x02,
+	CMD_03_SET_TIMER_IRQ		= 0x03,
+	CMD_04_GET_EVENT		= 0x04,
+	CMD_05_GET_PIPES		= 0x05,
+
+	CMD_06_ALLOCATE_PIPE            = 0x06,
+	CMD_07_RELEASE_PIPE		= 0x07,
+	CMD_08_ASK_BUFFERS		= 0x08,
+	CMD_09_STOP_PIPE		= 0x09,
+	CMD_0A_GET_PIPE_SPL_COUNT	= 0x0a,
+	CMD_0B_TOGGLE_PIPE_STATE	= 0x0b,
+
+	CMD_0C_DEF_STREAM		= 0x0c,
+	CMD_0D_SET_MUTE			= 0x0d,
+	CMD_0E_GET_STREAM_SPL_COUNT     = 0x0e,
+	CMD_0F_UPDATE_BUFFER		= 0x0f,
+	CMD_10_GET_BUFFER		= 0x10,
+	CMD_11_CANCEL_BUFFER		= 0x11,
+	CMD_12_GET_PEAK			= 0x12,
+	CMD_13_SET_STREAM_STATE		= 0x13,
+	CMD_14_INVALID			= 0x14,
+};
+
+/* pipe states */
+enum pipe_state_t {
+	PSTATE_IDLE	= 0,	/* the pipe is not processed in the XES_IRQ
+				 * (free or stopped, or paused). */
+	PSTATE_RUN	= 1,	/* sustained play/record state. */
+	PSTATE_PURGE	= 2,	/* the ES channels are now off, render pipes do
+				 * not DMA, record pipe do a last DMA. */
+	PSTATE_ACQUIRE	= 3,	/* the ES channels are now on, render pipes do
+				 * not yet increase their sample count, record
+				 * pipes do not DMA. */
+	PSTATE_CLOSING	= 4,	/* the pipe is releasing, and may not yet
+				 * receive an "alloc" command. */
+};
+
+/* stream states */
+enum stream_state_t {
+	SSTATE_STOP	=  0x00,       /* setting to stop resets the stream spl
+					* count.*/
+	SSTATE_RUN	= (0x01 << 0), /* start DMA and spl count handling. */
+	SSTATE_PAUSE	= (0x01 << 1), /* pause DMA and spl count handling. */
+};
+
+/* buffer flags */
+enum buffer_flags {
+	BF_VALID	= 0x80,	/* set if the buffer is valid, clear if free.*/
+	BF_CURRENT	= 0x40,	/* set if this is the current buffer (there is
+				 * always a current buffer).*/
+	BF_NOTIFY_EOB	= 0x20,	/* set if this buffer must cause a PCI event
+				 * when finished.*/
+	BF_CIRCULAR	= 0x10,	/* set if buffer[1] must be copied to buffer[0]
+				 * by the end of this buffer.*/
+	BF_64BITS_ADR	= 0x08,	/* set if the hi part of the address is valid.*/
+	BF_xx		= 0x04,	/* future extension.*/
+	BF_EOB		= 0x02,	/* set if finished, but not yet free.*/
+	BF_PAUSE	= 0x01,	/* pause stream at buffer end.*/
+	BF_ZERO		= 0x00,	/* no flags (init).*/
+};
+
+/**
+*	Stream Flags definitions
+*/
+enum stream_flags {
+	SF_ZERO		= 0x00000000, /* no flags (stream invalid). */
+	SF_VALID	= 0x10000000, /* the stream has a valid DMA_conf
+				       * info (setstreamformat). */
+	SF_XRUN		= 0x20000000, /* the stream is un x-run state. */
+	SF_START	= 0x40000000, /* the DMA is running.*/
+	SF_ASIO		= 0x80000000, /* ASIO.*/
+};
+
+
+#define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */
+#define PSTATE_OFFSET             28 /* 4 MSBits are status bits */
+
+
+#define MASK_STREAM_HAS_MAPPING	(1L << 12)
+#define MASK_STREAM_IS_ASIO	(1L <<  9)
+#define STREAM_FMT_OFFSET	10   /* the stream fmt bits start at the 10th
+				      * bit in the command word. */
+
+#define STREAM_FMT_16b          0x02
+#define STREAM_FMT_intel        0x01
+
+#define FREQ_FIELD_OFFSET	15  /* offset of the freq field in the response
+				     * word */
+
+#define BUFF_FLAGS_OFFSET	  24 /*  offset of the buffer flags in the
+				      *  response word. */
+#define MASK_DATA_SIZE	  0x00FFFFFF /* this must match the field size of
+				      * datasize in the buffer_t structure. */
+
+#define MASK_BUFFER_ID	        0xFF /* the cancel command awaits a buffer ID,
+				      * may be 0xFF for "current". */
+
+
+/* code adapted from PcxErr_e.h */
+
+/* Bits masks */
+
+#define ERROR_MASK              0x8000
+
+#define SOURCE_MASK             0x7800
+
+#define E_SOURCE_BOARD          0x4000 /* 8 >> 1 */
+#define E_SOURCE_DRV            0x2000 /* 4 >> 1 */
+#define E_SOURCE_API            0x1000 /* 2 >> 1 */
+/* Error tools */
+#define E_SOURCE_TOOLS          0x0800 /* 1 >> 1 */
+/* Error pcxaudio */
+#define E_SOURCE_AUDIO          0x1800 /* 3 >> 1 */
+/* Error virtual pcx */
+#define E_SOURCE_VPCX           0x2800 /* 5 >> 1 */
+/* Error dispatcher */
+#define E_SOURCE_DISPATCHER     0x3000 /* 6 >> 1 */
+/* Error from CobraNet firmware */
+#define E_SOURCE_COBRANET       0x3800 /* 7 >> 1 */
+
+#define E_SOURCE_USER           0x7800
+
+#define CLASS_MASK              0x0700
+
+#define CODE_MASK               0x00FF
+
+/* Bits values */
+
+/* Values for the error/warning bit */
+#define ERROR_VALUE             0x8000
+#define WARNING_VALUE           0x0000
+
+/* Class values */
+#define E_CLASS_GENERAL                  0x0000
+#define E_CLASS_INVALID_CMD              0x0100
+#define E_CLASS_INVALID_STD_OBJECT       0x0200
+#define E_CLASS_RSRC_IMPOSSIBLE          0x0300
+#define E_CLASS_WRONG_CONTEXT            0x0400
+#define E_CLASS_BAD_SPECIFIC_PARAMETER   0x0500
+#define E_CLASS_REAL_TIME_ERROR          0x0600
+#define E_CLASS_DIRECTSHOW               0x0700
+#define E_CLASS_FREE                     0x0700
+
+
+/* Complete DRV error code for the general class */
+#define ED_GN           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL)
+#define ED_CONCURRENCY                  (ED_GN | 0x01)
+#define ED_DSP_CRASHED                  (ED_GN | 0x02)
+#define ED_UNKNOWN_BOARD                (ED_GN | 0x03)
+#define ED_NOT_INSTALLED                (ED_GN | 0x04)
+#define ED_CANNOT_OPEN_SVC_MANAGER      (ED_GN | 0x05)
+#define ED_CANNOT_READ_REGISTRY         (ED_GN | 0x06)
+#define ED_DSP_VERSION_MISMATCH         (ED_GN | 0x07)
+#define ED_UNAVAILABLE_FEATURE          (ED_GN | 0x08)
+#define ED_CANCELLED                    (ED_GN | 0x09)
+#define ED_NO_RESPONSE_AT_IRQA          (ED_GN | 0x10)
+#define ED_INVALID_ADDRESS              (ED_GN | 0x11)
+#define ED_DSP_CORRUPTED                (ED_GN | 0x12)
+#define ED_PENDING_OPERATION            (ED_GN | 0x13)
+#define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE   (ED_GN | 0x14)
+#define ED_NET_REGISTER_ERROR               (ED_GN | 0x15)
+#define ED_NET_THREAD_ERROR                 (ED_GN | 0x16)
+#define ED_NET_OPEN_ERROR                   (ED_GN | 0x17)
+#define ED_NET_CLOSE_ERROR                  (ED_GN | 0x18)
+#define ED_NET_NO_MORE_PACKET               (ED_GN | 0x19)
+#define ED_NET_NO_MORE_BUFFER               (ED_GN | 0x1A)
+#define ED_NET_SEND_ERROR                   (ED_GN | 0x1B)
+#define ED_NET_RECEIVE_ERROR                (ED_GN | 0x1C)
+#define ED_NET_WRONG_MSG_SIZE               (ED_GN | 0x1D)
+#define ED_NET_WAIT_ERROR                   (ED_GN | 0x1E)
+#define ED_NET_EEPROM_ERROR                 (ED_GN | 0x1F)
+#define ED_INVALID_RS232_COM_NUMBER         (ED_GN | 0x20)
+#define ED_INVALID_RS232_INIT               (ED_GN | 0x21)
+#define ED_FILE_ERROR                       (ED_GN | 0x22)
+#define ED_INVALID_GPIO_CMD                 (ED_GN | 0x23)
+#define ED_RS232_ALREADY_OPENED             (ED_GN | 0x24)
+#define ED_RS232_NOT_OPENED                 (ED_GN | 0x25)
+#define ED_GPIO_ALREADY_OPENED              (ED_GN | 0x26)
+#define ED_GPIO_NOT_OPENED                  (ED_GN | 0x27)
+#define ED_REGISTRY_ERROR                   (ED_GN | 0x28) /* <- NCX */
+#define ED_INVALID_SERVICE                  (ED_GN | 0x29) /* <- NCX */
+
+#define ED_READ_FILE_ALREADY_OPENED	    (ED_GN | 0x2a) /* <- Decalage
+							    * pour RCX
+							    * (old 0x28)
+							    * */
+#define ED_READ_FILE_INVALID_COMMAND	    (ED_GN | 0x2b) /* ~ */
+#define ED_READ_FILE_INVALID_PARAMETER	    (ED_GN | 0x2c) /* ~ */
+#define ED_READ_FILE_ALREADY_CLOSED	    (ED_GN | 0x2d) /* ~ */
+#define ED_READ_FILE_NO_INFORMATION	    (ED_GN | 0x2e) /* ~ */
+#define ED_READ_FILE_INVALID_HANDLE	    (ED_GN | 0x2f) /* ~ */
+#define ED_READ_FILE_END_OF_FILE	    (ED_GN | 0x30) /* ~ */
+#define ED_READ_FILE_ERROR	            (ED_GN | 0x31) /* ~ */
+
+#define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour
+							     * PCX (old 0x14) */
+#define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */
+#define ED_DSP_CRASHED_EXC_ILLEGAL           (ED_GN | 0x34) /* ~ */
+#define ED_DSP_CRASHED_EXC_TIMER_REENTRY     (ED_GN | 0x35) /* ~ */
+#define ED_DSP_CRASHED_EXC_FATAL_ERROR       (ED_GN | 0x36) /* ~ */
+
+#define ED_FLASH_PCCARD_NOT_PRESENT          (ED_GN | 0x37)
+
+#define ED_NO_CURRENT_CLOCK                  (ED_GN | 0x38)
+
+/* Complete DRV error code for real time class */
+#define ED_RT           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR)
+#define ED_DSP_TIMED_OUT                (ED_RT | 0x01)
+#define ED_DSP_CHK_TIMED_OUT            (ED_RT | 0x02)
+#define ED_STREAM_OVERRUN               (ED_RT | 0x03)
+#define ED_DSP_BUSY                     (ED_RT | 0x04)
+#define ED_DSP_SEMAPHORE_TIME_OUT       (ED_RT | 0x05)
+#define ED_BOARD_TIME_OUT               (ED_RT | 0x06)
+#define ED_XILINX_ERROR                 (ED_RT | 0x07)
+#define ED_COBRANET_ITF_NOT_RESPONDING  (ED_RT | 0x08)
+
+/* Complete BOARD error code for the invaid standard object class */
+#define EB_ISO          (ERROR_VALUE | E_SOURCE_BOARD | \
+			 E_CLASS_INVALID_STD_OBJECT)
+#define EB_INVALID_EFFECT               (EB_ISO | 0x00)
+#define EB_INVALID_PIPE                 (EB_ISO | 0x40)
+#define EB_INVALID_STREAM               (EB_ISO | 0x80)
+#define EB_INVALID_AUDIO                (EB_ISO | 0xC0)
+
+/* Complete BOARD error code for impossible resource allocation class */
+#define EB_RI           (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE)
+#define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01)
+#define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE           (EB_RI | 0x02)
+
+#define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE		\
+	EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE
+#define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE			\
+	EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE
+
+#define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE     (EB_RI | 0x03)
+#define EB_TOO_MANY_DIFFERED_CMD                (EB_RI | 0x04)
+#define EB_RBUFFERS_TABLE_OVERFLOW              (EB_RI | 0x05)
+#define EB_ALLOCATE_EFFECTS_IMPOSSIBLE          (EB_RI | 0x08)
+#define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE       (EB_RI | 0x09)
+#define EB_RBUFFER_NOT_AVAILABLE                (EB_RI | 0x0A)
+#define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE     (EB_RI | 0x0B)
+#define EB_STATUS_DIALOG_IMPOSSIBLE             (EB_RI | 0x1D)
+#define EB_CONTROL_CMD_IMPOSSIBLE               (EB_RI | 0x1E)
+#define EB_STATUS_SEND_IMPOSSIBLE               (EB_RI | 0x1F)
+#define EB_ALLOCATE_PIPE_IMPOSSIBLE             (EB_RI | 0x40)
+#define EB_ALLOCATE_STREAM_IMPOSSIBLE           (EB_RI | 0x80)
+#define EB_ALLOCATE_AUDIO_IMPOSSIBLE            (EB_RI | 0xC0)
+
+/* Complete BOARD error code for wrong call context class */
+#define EB_WCC          (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT)
+#define EB_CMD_REFUSED                  (EB_WCC | 0x00)
+#define EB_START_STREAM_REFUSED         (EB_WCC | 0xFC)
+#define EB_SPC_REFUSED                  (EB_WCC | 0xFD)
+#define EB_CSN_REFUSED                  (EB_WCC | 0xFE)
+#define EB_CSE_REFUSED                  (EB_WCC | 0xFF)
+
+
+
+
+#endif /* LX_DEFS_H */
diff --git a/sound/pci/oxygen/oxygen_pcm.c b/sound/pci/oxygen/oxygen_pcm.c
index c262049..3b5ca70 100644
--- a/sound/pci/oxygen/oxygen_pcm.c
+++ b/sound/pci/oxygen/oxygen_pcm.c
@@ -487,10 +487,14 @@
 {
 	struct oxygen *chip = snd_pcm_substream_chip(substream);
 	unsigned int channel = oxygen_substream_channel(substream);
+	unsigned int channel_mask = 1 << channel;
 
 	spin_lock_irq(&chip->reg_lock);
-	chip->interrupt_mask &= ~(1 << channel);
+	chip->interrupt_mask &= ~channel_mask;
 	oxygen_write16(chip, OXYGEN_INTERRUPT_MASK, chip->interrupt_mask);
+
+	oxygen_set_bits8(chip, OXYGEN_DMA_FLUSH, channel_mask);
+	oxygen_clear_bits8(chip, OXYGEN_DMA_FLUSH, channel_mask);
 	spin_unlock_irq(&chip->reg_lock);
 
 	return snd_pcm_lib_free_pages(substream);
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index bc5ce11..bf971f7 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -113,8 +113,8 @@
  */
 
 /*
- * Xonar Essence STX
- * -----------------
+ * Xonar Essence ST (Deluxe)/STX
+ * -----------------------------
  *
  * CMI8788:
  *
@@ -180,6 +180,8 @@
 	MODEL_DX,
 	MODEL_HDAV,	/* without daughterboard */
 	MODEL_HDAV_H6,	/* with H6 daughterboard */
+	MODEL_ST,
+	MODEL_ST_H6,
 	MODEL_STX,
 };
 
@@ -188,8 +190,10 @@
 	{ OXYGEN_PCI_SUBID(0x1043, 0x8275), .driver_data = MODEL_DX },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x8314), .driver_data = MODEL_HDAV },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x8327), .driver_data = MODEL_DX },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x835c), .driver_data = MODEL_STX },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x835d), .driver_data = MODEL_ST },
 	{ OXYGEN_PCI_SUBID_BROKEN_EEPROM },
 	{ }
 };
@@ -210,9 +214,9 @@
 #define GPIO_DX_FRONT_PANEL	0x0002
 #define GPIO_DX_INPUT_ROUTE	0x0100
 
-#define GPIO_HDAV_DB_MASK	0x0030
-#define GPIO_HDAV_DB_H6		0x0000
-#define GPIO_HDAV_DB_XX		0x0020
+#define GPIO_DB_MASK		0x0030
+#define GPIO_DB_H6		0x0000
+#define GPIO_DB_XX		0x0020
 
 #define GPIO_ST_HP_REAR		0x0002
 #define GPIO_ST_HP		0x0080
@@ -530,7 +534,7 @@
 	snd_component_add(chip->card, "CS5381");
 }
 
-static void xonar_stx_init(struct oxygen *chip)
+static void xonar_st_init(struct oxygen *chip)
 {
 	struct xonar_data *data = chip->model_data;
 
@@ -539,12 +543,11 @@
 		       OXYGEN_2WIRE_INTERRUPT_MASK |
 		       OXYGEN_2WIRE_SPEED_FAST);
 
+	if (chip->model.private_data == MODEL_ST_H6)
+		chip->model.dac_channels = 8;
 	data->anti_pop_delay = 100;
-	data->dacs = 1;
+	data->dacs = chip->model.private_data == MODEL_ST_H6 ? 4 : 1;
 	data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
-	data->ext_power_reg = OXYGEN_GPI_DATA;
-	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
-	data->ext_power_bit = GPI_DX_EXT_POWER;
 	data->pcm1796_oversampling = PCM1796_OS_64;
 
 	pcm1796_init(chip);
@@ -560,6 +563,17 @@
 	snd_component_add(chip->card, "CS5381");
 }
 
+static void xonar_stx_init(struct oxygen *chip)
+{
+	struct xonar_data *data = chip->model_data;
+
+	data->ext_power_reg = OXYGEN_GPI_DATA;
+	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
+	data->ext_power_bit = GPI_DX_EXT_POWER;
+
+	xonar_st_init(chip);
+}
+
 static void xonar_disable_output(struct oxygen *chip)
 {
 	struct xonar_data *data = chip->model_data;
@@ -1021,7 +1035,8 @@
 	.model_data_size = sizeof(struct xonar_data),
 	.device_config = PLAYBACK_0_TO_I2S |
 			 PLAYBACK_1_TO_SPDIF |
-			 CAPTURE_0_FROM_I2S_2,
+			 CAPTURE_0_FROM_I2S_2 |
+			 CAPTURE_1_FROM_SPDIF,
 	.dac_channels = 8,
 	.dac_volume_min = 255 - 2*60,
 	.dac_volume_max = 255,
@@ -1034,7 +1049,7 @@
 static const struct oxygen_model model_xonar_st = {
 	.longname = "Asus Virtuoso 100",
 	.chip = "AV200",
-	.init = xonar_stx_init,
+	.init = xonar_st_init,
 	.control_filter = xonar_st_control_filter,
 	.mixer_init = xonar_st_mixer_init,
 	.cleanup = xonar_st_cleanup,
@@ -1067,6 +1082,7 @@
 		[MODEL_D2]	= &model_xonar_d2,
 		[MODEL_D2X]	= &model_xonar_d2,
 		[MODEL_HDAV]	= &model_xonar_hdav,
+		[MODEL_ST]	= &model_xonar_st,
 		[MODEL_STX]	= &model_xonar_st,
 	};
 	static const char *const names[] = {
@@ -1076,6 +1092,8 @@
 		[MODEL_D2X]	= "Xonar D2X",
 		[MODEL_HDAV]	= "Xonar HDAV1.3",
 		[MODEL_HDAV_H6]	= "Xonar HDAV1.3+H6",
+		[MODEL_ST]	= "Xonar Essence ST",
+		[MODEL_ST_H6]	= "Xonar Essence ST+H6",
 		[MODEL_STX]	= "Xonar Essence STX",
 	};
 	unsigned int model = id->driver_data;
@@ -1092,21 +1110,27 @@
 		chip->model.init = xonar_dx_init;
 		break;
 	case MODEL_HDAV:
-		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL,
-				    GPIO_HDAV_DB_MASK);
-		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) &
-			GPIO_HDAV_DB_MASK) {
-		case GPIO_HDAV_DB_H6:
+		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
+		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & GPIO_DB_MASK) {
+		case GPIO_DB_H6:
 			model = MODEL_HDAV_H6;
 			break;
-		case GPIO_HDAV_DB_XX:
+		case GPIO_DB_XX:
 			snd_printk(KERN_ERR "unknown daughterboard\n");
 			return -ENODEV;
 		}
 		break;
+	case MODEL_ST:
+		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
+		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & GPIO_DB_MASK) {
+		case GPIO_DB_H6:
+			model = MODEL_ST_H6;
+			break;
+		}
+		break;
 	case MODEL_STX:
-		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL,
-				    GPIO_HDAV_DB_MASK);
+		chip->model.init = xonar_stx_init;
+		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
 		break;
 	}
 
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index e51a5ef..235a71e 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -507,41 +507,19 @@
  */
 
 static struct pci_device_id snd_riptide_ids[] = {
-	{
-	 .vendor = 0x127a,.device = 0x4310,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{
-	 .vendor = 0x127a,.device = 0x4320,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{
-	 .vendor = 0x127a,.device = 0x4330,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{
-	 .vendor = 0x127a,.device = 0x4340,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
+	{ PCI_DEVICE(0x127a, 0x4310) },
+	{ PCI_DEVICE(0x127a, 0x4320) },
+	{ PCI_DEVICE(0x127a, 0x4330) },
+	{ PCI_DEVICE(0x127a, 0x4340) },
 	{0,},
 };
 
 #ifdef SUPPORT_JOYSTICK
 static struct pci_device_id snd_riptide_joystick_ids[] __devinitdata = {
-	{
-	 .vendor = 0x127a,.device = 0x4312,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{
-	 .vendor = 0x127a,.device = 0x4322,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{.vendor = 0x127a,.device = 0x4332,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{.vendor = 0x127a,.device = 0x4342,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
+	{ PCI_DEVICE(0x127a, 0x4312) },
+	{ PCI_DEVICE(0x127a, 0x4322) },
+	{ PCI_DEVICE(0x127a, 0x4332) },
+	{ PCI_DEVICE(0x127a, 0x4342) },
 	{0,},
 };
 #endif
@@ -1209,12 +1187,79 @@
 }
 #endif
 
+static int try_to_load_firmware(struct cmdif *cif, struct snd_riptide *chip)
+{
+	union firmware_version firmware = { .ret = CMDRET_ZERO };
+	int i, timeout, err;
+
+	for (i = 0; i < 2; i++) {
+		WRITE_PORT_ULONG(cif->hwport->port[i].data1, 0);
+		WRITE_PORT_ULONG(cif->hwport->port[i].data2, 0);
+	}
+	SET_GRESET(cif->hwport);
+	udelay(100);
+	UNSET_GRESET(cif->hwport);
+	udelay(100);
+
+	for (timeout = 100000; --timeout; udelay(10)) {
+		if (IS_READY(cif->hwport) && !IS_GERR(cif->hwport))
+			break;
+	}
+	if (!timeout) {
+		snd_printk(KERN_ERR
+			   "Riptide: device not ready, audio status: 0x%x "
+			   "ready: %d gerr: %d\n",
+			   READ_AUDIO_STATUS(cif->hwport),
+			   IS_READY(cif->hwport), IS_GERR(cif->hwport));
+		return -EIO;
+	} else {
+		snd_printdd
+			("Riptide: audio status: 0x%x ready: %d gerr: %d\n",
+			 READ_AUDIO_STATUS(cif->hwport),
+			 IS_READY(cif->hwport), IS_GERR(cif->hwport));
+	}
+
+	SEND_GETV(cif, &firmware.ret);
+	snd_printdd("Firmware version: ASIC: %d CODEC %d AUXDSP %d PROG %d\n",
+		    firmware.firmware.ASIC, firmware.firmware.CODEC,
+		    firmware.firmware.AUXDSP, firmware.firmware.PROG);
+
+	for (i = 0; i < FIRMWARE_VERSIONS; i++) {
+		if (!memcmp(&firmware_versions[i], &firmware, sizeof(firmware)))
+			break;
+	}
+	if (i >= FIRMWARE_VERSIONS)
+		return 0; /* no match */
+
+	if (!chip)
+		return 1; /* OK */
+
+	snd_printdd("Writing Firmware\n");
+	if (!chip->fw_entry) {
+		err = request_firmware(&chip->fw_entry, "riptide.hex",
+				       &chip->pci->dev);
+		if (err) {
+			snd_printk(KERN_ERR
+				   "Riptide: Firmware not available %d\n", err);
+			return -EIO;
+		}
+	}
+	err = loadfirmware(cif, chip->fw_entry->data, chip->fw_entry->size);
+	if (err) {
+		snd_printk(KERN_ERR
+			   "Riptide: Could not load firmware %d\n", err);
+		return err;
+	}
+
+	chip->firmware = firmware;
+
+	return 1; /* OK */
+}
+
 static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip)
 {
-	int timeout, tries;
 	union cmdret rptr = CMDRET_ZERO;
-	union firmware_version firmware;
-	int i, j, err, has_firmware;
+	int err, tries;
 
 	if (!cif)
 		return -EINVAL;
@@ -1227,75 +1272,11 @@
 	cif->is_reset = 0;
 
 	tries = RESET_TRIES;
-	has_firmware = 0;
-	while (has_firmware == 0 && tries-- > 0) {
-		for (i = 0; i < 2; i++) {
-			WRITE_PORT_ULONG(cif->hwport->port[i].data1, 0);
-			WRITE_PORT_ULONG(cif->hwport->port[i].data2, 0);
-		}
-		SET_GRESET(cif->hwport);
-		udelay(100);
-		UNSET_GRESET(cif->hwport);
-		udelay(100);
-
-		for (timeout = 100000; --timeout; udelay(10)) {
-			if (IS_READY(cif->hwport) && !IS_GERR(cif->hwport))
-				break;
-		}
-		if (timeout == 0) {
-			snd_printk(KERN_ERR
-				   "Riptide: device not ready, audio status: 0x%x ready: %d gerr: %d\n",
-				   READ_AUDIO_STATUS(cif->hwport),
-				   IS_READY(cif->hwport), IS_GERR(cif->hwport));
-			return -EIO;
-		} else {
-			snd_printdd
-			    ("Riptide: audio status: 0x%x ready: %d gerr: %d\n",
-			     READ_AUDIO_STATUS(cif->hwport),
-			     IS_READY(cif->hwport), IS_GERR(cif->hwport));
-		}
-
-		SEND_GETV(cif, &rptr);
-		for (i = 0; i < 4; i++)
-			firmware.ret.retwords[i] = rptr.retwords[i];
-
-		snd_printdd
-		    ("Firmware version: ASIC: %d CODEC %d AUXDSP %d PROG %d\n",
-		     firmware.firmware.ASIC, firmware.firmware.CODEC,
-		     firmware.firmware.AUXDSP, firmware.firmware.PROG);
-
-		for (j = 0; j < FIRMWARE_VERSIONS; j++) {
-			has_firmware = 1;
-			for (i = 0; i < 4; i++) {
-				if (firmware_versions[j].ret.retwords[i] !=
-				    firmware.ret.retwords[i])
-					has_firmware = 0;
-			}
-			if (has_firmware)
-				break;
-		}
-
-		if (chip != NULL && has_firmware == 0) {
-			snd_printdd("Writing Firmware\n");
-			if (!chip->fw_entry) {
-				if ((err =
-				     request_firmware(&chip->fw_entry,
-						      "riptide.hex",
-						      &chip->pci->dev)) != 0) {
-					snd_printk(KERN_ERR
-						   "Riptide: Firmware not available %d\n",
-						   err);
-					return -EIO;
-				}
-			}
-			err = loadfirmware(cif, chip->fw_entry->data,
-					   chip->fw_entry->size);
-			if (err)
-				snd_printk(KERN_ERR
-					   "Riptide: Could not load firmware %d\n",
-					   err);
-		}
-	}
+	do {
+		err = try_to_load_firmware(cif, chip);
+		if (err < 0)
+			return err;
+	} while (!err && --tries);
 
 	SEND_SACR(cif, 0, AC97_RESET);
 	SEND_RACR(cif, AC97_RESET, &rptr);
@@ -1337,11 +1318,6 @@
 	SET_AIE(cif->hwport);
 	SET_AIACK(cif->hwport);
 	cif->is_reset = 1;
-	if (chip) {
-		for (i = 0; i < 4; i++)
-			chip->firmware.ret.retwords[i] =
-			    firmware.ret.retwords[i];
-	}
 
 	return 0;
 }
@@ -2038,14 +2014,12 @@
 }
 
 #ifdef SUPPORT_JOYSTICK
-static int have_joystick;
-static struct pci_dev *riptide_gameport_pci;
-static struct gameport *riptide_gameport;
 
 static int __devinit
 snd_riptide_joystick_probe(struct pci_dev *pci, const struct pci_device_id *id)
 {
 	static int dev;
+	struct gameport *gameport;
 
 	if (dev >= SNDRV_CARDS)
 		return -ENODEV;
@@ -2054,36 +2028,33 @@
 		return -ENOENT;
 	}
 
-	if (joystick_port[dev]) {
-		riptide_gameport = gameport_allocate_port();
-		if (riptide_gameport) {
-			if (!request_region
-			    (joystick_port[dev], 8, "Riptide gameport")) {
-				snd_printk(KERN_WARNING
-					   "Riptide: cannot grab gameport 0x%x\n",
-					   joystick_port[dev]);
-				gameport_free_port(riptide_gameport);
-				riptide_gameport = NULL;
-			} else {
-				riptide_gameport_pci = pci;
-				riptide_gameport->io = joystick_port[dev];
-				gameport_register_port(riptide_gameport);
-			}
-		}
+	if (!joystick_port[dev++])
+		return 0;
+
+	gameport = gameport_allocate_port();
+	if (!gameport)
+		return -ENOMEM;
+	if (!request_region(joystick_port[dev], 8, "Riptide gameport")) {
+		snd_printk(KERN_WARNING
+			   "Riptide: cannot grab gameport 0x%x\n",
+			   joystick_port[dev]);
+		gameport_free_port(gameport);
+		return -EBUSY;
 	}
-	dev++;
+
+	gameport->io = joystick_port[dev];
+	gameport_register_port(gameport);
+	pci_set_drvdata(pci, gameport);
 	return 0;
 }
 
 static void __devexit snd_riptide_joystick_remove(struct pci_dev *pci)
 {
-	if (riptide_gameport) {
-		if (riptide_gameport_pci == pci) {
-			release_region(riptide_gameport->io, 8);
-			riptide_gameport_pci = NULL;
-			gameport_unregister_port(riptide_gameport);
-			riptide_gameport = NULL;
-		}
+	struct gameport *gameport = pci_get_drvdata(pci);
+	if (gameport) {
+		release_region(gameport->io, 8);
+		gameport_unregister_port(gameport);
+		pci_set_drvdata(pci, NULL);
 	}
 }
 #endif
@@ -2094,8 +2065,8 @@
 	static int dev;
 	struct snd_card *card;
 	struct snd_riptide *chip;
-	unsigned short addr;
-	int err = 0;
+	unsigned short val;
+	int err;
 
 	if (dev >= SNDRV_CARDS)
 		return -ENODEV;
@@ -2107,60 +2078,63 @@
 	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
 	if (err < 0)
 		return err;
-	if ((err = snd_riptide_create(card, pci, &chip)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
+	err = snd_riptide_create(card, pci, &chip);
+	if (err < 0)
+		goto error;
 	card->private_data = chip;
-	if ((err = snd_riptide_pcm(chip, 0, NULL)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
-	if ((err = snd_riptide_mixer(chip)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
-	pci_write_config_word(chip->pci, PCI_EXT_Legacy_Mask, LEGACY_ENABLE_ALL
-			      | (opl3_port[dev] ? LEGACY_ENABLE_FM : 0)
+	err = snd_riptide_pcm(chip, 0, NULL);
+	if (err < 0)
+		goto error;
+	err = snd_riptide_mixer(chip);
+	if (err < 0)
+		goto error;
+
+	val = LEGACY_ENABLE_ALL;
+	if (opl3_port[dev])
+		val |= LEGACY_ENABLE_FM;
 #ifdef SUPPORT_JOYSTICK
-			      | (joystick_port[dev] ? LEGACY_ENABLE_GAMEPORT :
-				 0)
+	if (joystick_port[dev])
+		val |= LEGACY_ENABLE_GAMEPORT;
 #endif
-			      | (mpu_port[dev]
-				 ? (LEGACY_ENABLE_MPU_INT | LEGACY_ENABLE_MPU) :
-				 0)
-			      | ((chip->irq << 4) & 0xF0));
-	if ((addr = mpu_port[dev]) != 0) {
-		pci_write_config_word(chip->pci, PCI_EXT_MPU_Base, addr);
-		if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_RIPTIDE,
-					       addr, 0, chip->irq, 0,
-					       &chip->rmidi)) < 0)
+	if (mpu_port[dev])
+		val |= LEGACY_ENABLE_MPU_INT | LEGACY_ENABLE_MPU;
+	val |= (chip->irq << 4) & 0xf0;
+	pci_write_config_word(chip->pci, PCI_EXT_Legacy_Mask, val);
+	if (mpu_port[dev]) {
+		val = mpu_port[dev];
+		pci_write_config_word(chip->pci, PCI_EXT_MPU_Base, val);
+		err = snd_mpu401_uart_new(card, 0, MPU401_HW_RIPTIDE,
+					  val, 0, chip->irq, 0,
+					  &chip->rmidi);
+		if (err < 0)
 			snd_printk(KERN_WARNING
 				   "Riptide: Can't Allocate MPU at 0x%x\n",
-				   addr);
+				   val);
 		else
-			chip->mpuaddr = addr;
+			chip->mpuaddr = val;
 	}
-	if ((addr = opl3_port[dev]) != 0) {
-		pci_write_config_word(chip->pci, PCI_EXT_FM_Base, addr);
-		if ((err = snd_opl3_create(card, addr, addr + 2,
-					   OPL3_HW_RIPTIDE, 0,
-					   &chip->opl3)) < 0)
+	if (opl3_port[dev]) {
+		val = opl3_port[dev];
+		pci_write_config_word(chip->pci, PCI_EXT_FM_Base, val);
+		err = snd_opl3_create(card, val, val + 2,
+				      OPL3_HW_RIPTIDE, 0, &chip->opl3);
+		if (err < 0)
 			snd_printk(KERN_WARNING
 				   "Riptide: Can't Allocate OPL3 at 0x%x\n",
-				   addr);
+				   val);
 		else {
-			chip->opladdr = addr;
-			if ((err =
-			     snd_opl3_hwdep_new(chip->opl3, 0, 1, NULL)) < 0)
+			chip->opladdr = val;
+			err = snd_opl3_hwdep_new(chip->opl3, 0, 1, NULL);
+			if (err < 0)
 				snd_printk(KERN_WARNING
 					   "Riptide: Can't Allocate OPL3-HWDEP\n");
 		}
 	}
 #ifdef SUPPORT_JOYSTICK
-	if ((addr = joystick_port[dev]) != 0) {
-		pci_write_config_word(chip->pci, PCI_EXT_Game_Base, addr);
-		chip->gameaddr = addr;
+	if (joystick_port[dev]) {
+		val = joystick_port[dev];
+		pci_write_config_word(chip->pci, PCI_EXT_Game_Base, val);
+		chip->gameaddr = val;
 	}
 #endif
 
@@ -2178,13 +2152,16 @@
 		 chip->opladdr);
 #endif
 	snd_riptide_proc_init(chip);
-	if ((err = snd_card_register(card)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
+	err = snd_card_register(card);
+	if (err < 0)
+		goto error;
 	pci_set_drvdata(pci, card);
 	dev++;
 	return 0;
+
+ error:
+	snd_card_free(card);
+	return err;
 }
 
 static void __devexit snd_card_riptide_remove(struct pci_dev *pci)
@@ -2216,14 +2193,11 @@
 static int __init alsa_card_riptide_init(void)
 {
 	int err;
-	if ((err = pci_register_driver(&driver)) < 0)
+	err = pci_register_driver(&driver);
+	if (err < 0)
 		return err;
 #if defined(SUPPORT_JOYSTICK)
-	if (pci_register_driver(&joystick_driver) < 0) {
-		have_joystick = 0;
-		snd_printk(KERN_INFO "no joystick found\n");
-	} else
-		have_joystick = 1;
+	pci_register_driver(&joystick_driver);
 #endif
 	return 0;
 }
@@ -2232,8 +2206,7 @@
 {
 	pci_unregister_driver(&driver);
 #if defined(SUPPORT_JOYSTICK)
-	if (have_joystick)
-		pci_unregister_driver(&joystick_driver);
+	pci_unregister_driver(&joystick_driver);
 #endif
 }
 
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 314e735..3da5c02 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -28,6 +28,7 @@
 #include <linux/pci.h>
 #include <linux/firmware.h>
 #include <linux/moduleparam.h>
+#include <linux/math64.h>
 
 #include <sound/core.h>
 #include <sound/control.h>
@@ -402,9 +403,9 @@
 #define HDSP_DMA_AREA_BYTES ((HDSP_MAX_CHANNELS+1) * HDSP_CHANNEL_BUFFER_BYTES)
 #define HDSP_DMA_AREA_KILOBYTES (HDSP_DMA_AREA_BYTES/1024)
 
-/* use hotplug firmeare loader? */
+/* use hotplug firmware loader? */
 #if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
-#if !defined(HDSP_USE_HWDEP_LOADER) && !defined(CONFIG_SND_HDSP)
+#if !defined(HDSP_USE_HWDEP_LOADER)
 #define HDSP_FW_LOADER
 #endif
 #endif
@@ -1047,7 +1048,6 @@
 static void hdsp_set_dds_value(struct hdsp *hdsp, int rate)
 {
 	u64 n;
-	u32 r;
 
 	if (rate >= 112000)
 		rate /= 4;
@@ -1055,7 +1055,7 @@
 		rate /= 2;
 
 	n = DDS_NUMERATOR;
-	div64_32(&n, rate, &r);
+	n = div_u64(n, rate);
 	/* n should be less than 2^32 for being written to FREQ register */
 	snd_BUG_ON(n >> 32);
 	/* HDSP_freqReg and HDSP_resetPointer are the same, so keep the DDS
@@ -3097,7 +3097,6 @@
 static int hdsp_dds_offset(struct hdsp *hdsp)
 {
 	u64 n;
-	u32 r;
 	unsigned int dds_value = hdsp->dds_value;
 	int system_sample_rate = hdsp->system_sample_rate;
 
@@ -3109,7 +3108,7 @@
 	 * dds_value = n / rate
 	 * rate = n / dds_value
 	 */
-	div64_32(&n, dds_value, &r);
+	n = div_u64(n, dds_value);
 	if (system_sample_rate >= 112000)
 		n *= 4;
 	else if (system_sample_rate >= 56000)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index bac2dc0..0dce331 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -29,6 +29,7 @@
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/math64.h>
 #include <asm/io.h>
 
 #include <sound/core.h>
@@ -831,7 +832,6 @@
 static void hdspm_set_dds_value(struct hdspm *hdspm, int rate)
 {
 	u64 n;
-	u32 r;
 	
 	if (rate >= 112000)
 		rate /= 4;
@@ -844,7 +844,7 @@
         */	   
 	/* n = 104857600000000ULL; */ /*  =  2^20 * 10^8 */
 	n = 110100480000000ULL;    /* Value checked for AES32 and MADI */
-	div64_32(&n, rate, &r);
+	n = div_u64(n, rate);
 	/* n should be less than 2^32 for being written to FREQ register */
 	snd_BUG_ON(n >> 32);
 	hdspm_write(hdspm, HDSPM_freqReg, (u32)n);
diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c
index 80df9b1..2cc0eda 100644
--- a/sound/ppc/awacs.c
+++ b/sound/ppc/awacs.c
@@ -477,7 +477,7 @@
 #define AMP_CH_SPK	0
 #define AMP_CH_HD	1
 
-static struct snd_kcontrol_new snd_pmac_awacs_amp_vol[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_amp_vol[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "PC Speaker Playback Volume",
 	  .info = snd_pmac_awacs_info_volume_amp,
@@ -514,7 +514,7 @@
 	},
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_amp_hp_sw __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_amp_hp_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "Headphone Playback Switch",
 	.info = snd_pmac_boolean_stereo_info,
@@ -523,7 +523,7 @@
 	.private_value = AMP_CH_HD,
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_amp_spk_sw __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_amp_spk_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "PC Speaker Playback Switch",
 	.info = snd_pmac_boolean_stereo_info,
@@ -595,46 +595,46 @@
 /*
  * lists of mixer elements
  */
-static struct snd_kcontrol_new snd_pmac_awacs_mixers[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers[] __devinitdata = {
 	AWACS_SWITCH("Master Capture Switch", 1, SHIFT_LOOPTHRU, 0),
 	AWACS_VOLUME("Master Capture Volume", 0, 4, 0),
 /*	AWACS_SWITCH("Unknown Playback Switch", 6, SHIFT_PAROUT0, 0), */
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers_beige[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_beige[] __devinitdata = {
 	AWACS_VOLUME("Master Playback Volume", 2, 6, 1),
 	AWACS_VOLUME("Play-through Playback Volume", 5, 6, 1),
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_LINE, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers_lo[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_lo[] __devinitdata = {
 	AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __devinitdata = {
 	AWACS_VOLUME("Play-through Playback Volume", 5, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[] __devinitdata = {
 	AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
 	AWACS_VOLUME("Master Playback Volume", 5, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __devinitdata = {
 	AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac5500[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac5500[] __devinitdata = {
 	AWACS_VOLUME("Headphone Playback Volume", 2, 6, 1),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __devinitdata = {
 	AWACS_VOLUME("Master Playback Volume", 2, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 };
@@ -642,34 +642,34 @@
 /* FIXME: is this correct order?
  * screamer (powerbook G3 pismo) seems to have different bits...
  */
-static struct snd_kcontrol_new snd_pmac_awacs_mixers2[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers2[] __devinitdata = {
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_LINE, 0),
 	AWACS_SWITCH("Mic Capture Switch", 0, SHIFT_MUX_MIC, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers2[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers2[] __devinitdata = {
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
 	AWACS_SWITCH("Mic Capture Switch", 0, SHIFT_MUX_LINE, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mixers2_pmac5500[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers2_pmac5500[] __devinitdata = {
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_master_sw __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_master_sw __devinitdata =
 AWACS_SWITCH("Master Playback Switch", 1, SHIFT_HDMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_master_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_master_sw_imac __devinitdata =
 AWACS_SWITCH("Line out Playback Switch", 1, SHIFT_HDMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_master_sw_pmac5500 __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_master_sw_pmac5500 __devinitdata =
 AWACS_SWITCH("Headphone Playback Switch", 1, SHIFT_HDMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_mic_boost[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mic_boost[] __devinitdata = {
 	AWACS_SWITCH("Mic Boost Capture Switch", 0, SHIFT_GAINLINE, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mic_boost[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mic_boost[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "Mic Boost Capture Volume",
 	  .info = snd_pmac_screamer_mic_boost_info,
@@ -678,34 +678,34 @@
 	},
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mic_boost_pmac7500[] __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_mic_boost_pmac7500[] __devinitdata =
 {
 	AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_beige[] __initdata =
+static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_beige[] __devinitdata =
 {
 	AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0),
 	AWACS_SWITCH("CD Boost Capture Switch", 6, SHIFT_MIC_BOOST, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_imac[] __initdata =
+static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_imac[] __devinitdata =
 {
 	AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0),
 	AWACS_SWITCH("Mic Boost Capture Switch", 6, SHIFT_MIC_BOOST, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __devinitdata = {
 	AWACS_VOLUME("PC Speaker Playback Volume", 4, 6, 1),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __devinitdata =
 AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_SPKMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __devinitdata =
 AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __devinitdata =
 AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 0);
 
 
@@ -872,7 +872,7 @@
 /*
  * initialize chip
  */
-int __init
+int __devinit
 snd_pmac_awacs_init(struct snd_pmac *chip)
 {
 	int pm7500 = IS_PM7500;
diff --git a/sound/ppc/beep.c b/sound/ppc/beep.c
index 89f5c32..a9d3507 100644
--- a/sound/ppc/beep.c
+++ b/sound/ppc/beep.c
@@ -215,7 +215,7 @@
 };
 
 /* Initialize beep stuff */
-int __init snd_pmac_attach_beep(struct snd_pmac *chip)
+int __devinit snd_pmac_attach_beep(struct snd_pmac *chip)
 {
 	struct pmac_beep *beep;
 	struct input_dev *input_dev;
diff --git a/sound/ppc/burgundy.c b/sound/ppc/burgundy.c
index 45a7629..16ed240 100644
--- a/sound/ppc/burgundy.c
+++ b/sound/ppc/burgundy.c
@@ -46,12 +46,12 @@
 	timeout = 50;
 	while (!(in_le32(&chip->awacs->codec_stat) & MASK_EXTEND) && timeout--)
 		udelay(1);
-	if (! timeout)
+	if (timeout < 0)
 		printk(KERN_DEBUG "burgundy_extend_wait: timeout #1\n");
 	timeout = 50;
 	while ((in_le32(&chip->awacs->codec_stat) & MASK_EXTEND) && timeout--)
 		udelay(1);
-	if (! timeout)
+	if (timeout < 0)
 		printk(KERN_DEBUG "burgundy_extend_wait: timeout #2\n");
 }
 
@@ -468,7 +468,7 @@
 /*
  * Burgundy mixers
  */
-static struct snd_kcontrol_new snd_pmac_burgundy_mixers[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_burgundy_mixers[] __devinitdata = {
 	BURGUNDY_VOLUME_W("Master Playback Volume", 0,
 			MASK_ADDR_BURGUNDY_MASTER_VOLUME, 8),
 	BURGUNDY_VOLUME_W("CD Capture Volume", 0,
@@ -496,7 +496,7 @@
  */	BURGUNDY_SWITCH_B("PCM Capture Switch", 0,
 			MASK_ADDR_BURGUNDY_HOSTIFEH, 0x01, 0, 0)
 };
-static struct snd_kcontrol_new snd_pmac_burgundy_mixers_imac[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_burgundy_mixers_imac[] __devinitdata = {
 	BURGUNDY_VOLUME_W("Line in Capture Volume", 0,
 			MASK_ADDR_BURGUNDY_VOLLINE, 16),
 	BURGUNDY_VOLUME_W("Mic Capture Volume", 0,
@@ -522,7 +522,7 @@
 	BURGUNDY_SWITCH_B("Mic Boost Capture Switch", 0,
 			MASK_ADDR_BURGUNDY_INPBOOST, 0x40, 0x80, 1)
 };
-static struct snd_kcontrol_new snd_pmac_burgundy_mixers_pmac[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_burgundy_mixers_pmac[] __devinitdata = {
 	BURGUNDY_VOLUME_W("Line in Capture Volume", 0,
 			MASK_ADDR_BURGUNDY_VOLMIC, 16),
 	BURGUNDY_VOLUME_B("Line in Gain Capture Volume", 0,
@@ -538,33 +538,33 @@
 /*	BURGUNDY_SWITCH_B("Line in Boost Capture Switch", 0,
  *		MASK_ADDR_BURGUNDY_INPBOOST, 0x40, 0x80, 1) */
 };
-static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_imac __devinitdata =
 BURGUNDY_SWITCH_B("Master Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_LEFT | BURGUNDY_LINEOUT_LEFT | BURGUNDY_HP_LEFT,
 	BURGUNDY_OUTPUT_RIGHT | BURGUNDY_LINEOUT_RIGHT | BURGUNDY_HP_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_pmac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_pmac __devinitdata =
 BURGUNDY_SWITCH_B("Master Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_INTERN
 	| BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_imac __devinitdata =
 BURGUNDY_SWITCH_B("PC Speaker Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_pmac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_pmac __devinitdata =
 BURGUNDY_SWITCH_B("PC Speaker Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_INTERN, 0, 0);
-static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_imac __devinitdata =
 BURGUNDY_SWITCH_B("Line out Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_LINEOUT_LEFT, BURGUNDY_LINEOUT_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_pmac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_pmac __devinitdata =
 BURGUNDY_SWITCH_B("Line out Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_hp_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_hp_sw_imac __devinitdata =
 BURGUNDY_SWITCH_B("Headphone Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_HP_LEFT, BURGUNDY_HP_RIGHT, 1);
@@ -618,7 +618,7 @@
 /*
  * initialize burgundy
  */
-int __init snd_pmac_burgundy_init(struct snd_pmac *chip)
+int __devinit snd_pmac_burgundy_init(struct snd_pmac *chip)
 {
 	int imac = machine_is_compatible("iMac");
 	int i, err;
diff --git a/sound/ppc/daca.c b/sound/ppc/daca.c
index f8d478c..24200b7 100644
--- a/sound/ppc/daca.c
+++ b/sound/ppc/daca.c
@@ -244,7 +244,7 @@
 }
 
 /* exported */
-int __init snd_pmac_daca_init(struct snd_pmac *chip)
+int __devinit snd_pmac_daca_init(struct snd_pmac *chip)
 {
 	int i, err;
 	struct pmac_daca *mix;
diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c
index a5afb26..835fa19 100644
--- a/sound/ppc/keywest.c
+++ b/sound/ppc/keywest.c
@@ -33,10 +33,6 @@
 static struct pmac_keywest *keywest_ctx;
 
 
-#ifndef i2c_device_name
-#define i2c_device_name(x)	((x)->name)
-#endif
-
 static int keywest_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -56,7 +52,7 @@
 	if (! keywest_ctx)
 		return -EINVAL;
 
-	if (strncmp(i2c_device_name(adapter), "mac-io", 6))
+	if (strncmp(adapter->name, "mac-io", 6))
 		return 0; /* ignored */
 
 	memset(&info, 0, sizeof(struct i2c_board_info));
@@ -109,7 +105,7 @@
 	}
 }
 
-int __init snd_pmac_tumbler_post_init(void)
+int __devinit snd_pmac_tumbler_post_init(void)
 {
 	int err;
 	
@@ -124,7 +120,7 @@
 }
 
 /* exported */
-int __init snd_pmac_keywest_init(struct pmac_keywest *i2c)
+int __devinit snd_pmac_keywest_init(struct pmac_keywest *i2c)
 {
 	int err;
 
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 9b4e9c3..7bc492e 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -702,7 +702,7 @@
 	.pointer =	snd_pmac_capture_pointer,
 };
 
-int __init snd_pmac_pcm_new(struct snd_pmac *chip)
+int __devinit snd_pmac_pcm_new(struct snd_pmac *chip)
 {
 	struct snd_pcm *pcm;
 	int err;
@@ -908,7 +908,7 @@
  * check the machine support byteswap (little-endian)
  */
 
-static void __init detect_byte_swap(struct snd_pmac *chip)
+static void __devinit detect_byte_swap(struct snd_pmac *chip)
 {
 	struct device_node *mio;
 
@@ -934,7 +934,7 @@
 /*
  * detect a sound chip
  */
-static int __init snd_pmac_detect(struct snd_pmac *chip)
+static int __devinit snd_pmac_detect(struct snd_pmac *chip)
 {
 	struct device_node *sound;
 	struct device_node *dn;
@@ -1143,7 +1143,7 @@
 	return 0;
 }
 
-static struct snd_kcontrol_new auto_mute_controls[] __initdata = {
+static struct snd_kcontrol_new auto_mute_controls[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "Auto Mute Switch",
 	  .info = snd_pmac_boolean_mono_info,
@@ -1158,7 +1158,7 @@
 	},
 };
 
-int __init snd_pmac_add_automute(struct snd_pmac *chip)
+int __devinit snd_pmac_add_automute(struct snd_pmac *chip)
 {
 	int err;
 	chip->auto_mute = 1;
@@ -1175,7 +1175,7 @@
 /*
  * create and detect a pmac chip record
  */
-int __init snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
+int __devinit snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
 {
 	struct snd_pmac *chip;
 	struct device_node *np;
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index f361c26..53c81a5 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -18,80 +18,30 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
 #include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/io.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <sound/asound.h>
+#include <sound/control.h>
 #include <sound/core.h>
 #include <sound/initval.h>
-#include <sound/pcm.h>
-#include <sound/asound.h>
 #include <sound/memalloc.h>
+#include <sound/pcm.h>
 #include <sound/pcm_params.h>
-#include <sound/control.h>
-#include <linux/dmapool.h>
-#include <linux/dma-mapping.h>
-#include <asm/firmware.h>
+
 #include <asm/dma.h>
+#include <asm/firmware.h>
 #include <asm/lv1call.h>
 #include <asm/ps3.h>
 #include <asm/ps3av.h>
 
-#include "snd_ps3_reg.h"
 #include "snd_ps3.h"
+#include "snd_ps3_reg.h"
 
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("PS3 sound driver");
-MODULE_AUTHOR("Sony Computer Entertainment Inc.");
-
-/* module  entries */
-static int __init snd_ps3_init(void);
-static void __exit snd_ps3_exit(void);
-
-/* ALSA snd driver ops */
-static int snd_ps3_pcm_open(struct snd_pcm_substream *substream);
-static int snd_ps3_pcm_close(struct snd_pcm_substream *substream);
-static int snd_ps3_pcm_prepare(struct snd_pcm_substream *substream);
-static int snd_ps3_pcm_trigger(struct snd_pcm_substream *substream,
-				 int cmd);
-static snd_pcm_uframes_t snd_ps3_pcm_pointer(struct snd_pcm_substream
-					     *substream);
-static int snd_ps3_pcm_hw_params(struct snd_pcm_substream *substream,
-				 struct snd_pcm_hw_params *hw_params);
-static int snd_ps3_pcm_hw_free(struct snd_pcm_substream *substream);
-
-
-/* ps3_system_bus_driver entries */
-static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev);
-static int snd_ps3_driver_remove(struct ps3_system_bus_device *dev);
-
-/* address setup */
-static int snd_ps3_map_mmio(void);
-static void snd_ps3_unmap_mmio(void);
-static int snd_ps3_allocate_irq(void);
-static void snd_ps3_free_irq(void);
-static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start);
-
-/* interrupt handler */
-static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id);
-
-
-/* set sampling rate/format */
-static int snd_ps3_set_avsetting(struct snd_pcm_substream *substream);
-/* take effect parameter change */
-static int snd_ps3_change_avsetting(struct snd_ps3_card_info *card);
-/* initialize avsetting and take it effect */
-static int snd_ps3_init_avsetting(struct snd_ps3_card_info *card);
-/* setup dma */
-static int snd_ps3_program_dma(struct snd_ps3_card_info *card,
-			       enum snd_ps3_dma_filltype filltype);
-static void snd_ps3_wait_for_dma_stop(struct snd_ps3_card_info *card);
-
-static dma_addr_t v_to_bus(struct snd_ps3_card_info *, void  *vaddr, int ch);
-
-
-module_init(snd_ps3_init);
-module_exit(snd_ps3_exit);
 
 /*
  * global
@@ -165,25 +115,13 @@
 	.fifo_size = PS3_AUDIO_FIFO_SIZE
 };
 
-static struct snd_pcm_ops snd_ps3_pcm_spdif_ops =
-{
-	.open = snd_ps3_pcm_open,
-	.close = snd_ps3_pcm_close,
-	.prepare = snd_ps3_pcm_prepare,
-	.ioctl = snd_pcm_lib_ioctl,
-	.trigger = snd_ps3_pcm_trigger,
-	.pointer = snd_ps3_pcm_pointer,
-	.hw_params = snd_ps3_pcm_hw_params,
-	.hw_free = snd_ps3_pcm_hw_free
-};
-
 static int snd_ps3_verify_dma_stop(struct snd_ps3_card_info *card,
 				   int count, int force_stop)
 {
 	int dma_ch, done, retries, stop_forced = 0;
 	uint32_t status;
 
-	for (dma_ch = 0; dma_ch < 8; dma_ch ++) {
+	for (dma_ch = 0; dma_ch < 8; dma_ch++) {
 		retries = count;
 		do {
 			status = read_reg(PS3_AUDIO_KICK(dma_ch)) &
@@ -259,9 +197,7 @@
 /*
  * convert virtual addr to ioif bus addr.
  */
-static dma_addr_t v_to_bus(struct snd_ps3_card_info *card,
-			   void * paddr,
-			   int ch)
+static dma_addr_t v_to_bus(struct snd_ps3_card_info *card, void *paddr, int ch)
 {
 	return card->dma_start_bus_addr[ch] +
 		(paddr - card->dma_start_vaddr[ch]);
@@ -321,7 +257,7 @@
 	spin_lock_irqsave(&card->dma_lock, irqsave);
 	for (ch = 0; ch < 2; ch++) {
 		start_vaddr = card->dma_next_transfer_vaddr[0];
-		for (stage = 0; stage < fill_stages; stage ++) {
+		for (stage = 0; stage < fill_stages; stage++) {
 			dma_ch = stage * 2 + ch;
 			if (silent)
 				dma_addr = card->null_buffer_start_dma_addr;
@@ -372,6 +308,71 @@
 }
 
 /*
+ * Interrupt handler
+ */
+static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id)
+{
+
+	uint32_t port_intr;
+	int underflow_occured = 0;
+	struct snd_ps3_card_info *card = dev_id;
+
+	if (!card->running) {
+		update_reg(PS3_AUDIO_AX_IS, 0);
+		update_reg(PS3_AUDIO_INTR_0, 0);
+		return IRQ_HANDLED;
+	}
+
+	port_intr = read_reg(PS3_AUDIO_AX_IS);
+	/*
+	 *serial buffer empty detected (every 4 times),
+	 *program next dma and kick it
+	 */
+	if (port_intr & PS3_AUDIO_AX_IE_ASOBEIE(0)) {
+		write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBEIE(0));
+		if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) {
+			write_reg(PS3_AUDIO_AX_IS, port_intr);
+			underflow_occured = 1;
+		}
+		if (card->silent) {
+			/* we are still in silent time */
+			snd_ps3_program_dma(card,
+				(underflow_occured) ?
+				SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL :
+				SND_PS3_DMA_FILLTYPE_SILENT_RUNNING);
+			snd_ps3_kick_dma(card);
+			card->silent--;
+		} else {
+			snd_ps3_program_dma(card,
+				(underflow_occured) ?
+				SND_PS3_DMA_FILLTYPE_FIRSTFILL :
+				SND_PS3_DMA_FILLTYPE_RUNNING);
+			snd_ps3_kick_dma(card);
+			snd_pcm_period_elapsed(card->substream);
+		}
+	} else if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) {
+		write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBUIE(0));
+		/*
+		 * serial out underflow, but buffer empty not detected.
+		 * in this case, fill fifo with 0 to recover.  After
+		 * filling dummy data, serial automatically start to
+		 * consume them and then will generate normal buffer
+		 * empty interrupts.
+		 * If both buffer underflow and buffer empty are occured,
+		 * it is better to do nomal data transfer than empty one
+		 */
+		snd_ps3_program_dma(card,
+				    SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
+		snd_ps3_kick_dma(card);
+		snd_ps3_program_dma(card,
+				    SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
+		snd_ps3_kick_dma(card);
+	}
+	/* clear interrupt cause */
+	return IRQ_HANDLED;
+};
+
+/*
  * audio mute on/off
  * mute_on : 0 output enabled
  *           1 mute
@@ -382,6 +383,142 @@
 }
 
 /*
+ * av setting
+ * NOTE: calling this function may generate audio interrupt.
+ */
+static int snd_ps3_change_avsetting(struct snd_ps3_card_info *card)
+{
+	int ret, retries, i;
+	pr_debug("%s: start\n", __func__);
+
+	ret = ps3av_set_audio_mode(card->avs.avs_audio_ch,
+				  card->avs.avs_audio_rate,
+				  card->avs.avs_audio_width,
+				  card->avs.avs_audio_format,
+				  card->avs.avs_audio_source);
+	/*
+	 * Reset the following unwanted settings:
+	 */
+
+	/* disable all 3wire buffers */
+	update_mask_reg(PS3_AUDIO_AO_3WMCTRL,
+			~(PS3_AUDIO_AO_3WMCTRL_ASOEN(0) |
+			  PS3_AUDIO_AO_3WMCTRL_ASOEN(1) |
+			  PS3_AUDIO_AO_3WMCTRL_ASOEN(2) |
+			  PS3_AUDIO_AO_3WMCTRL_ASOEN(3)),
+			0);
+	wmb();	/* ensure the hardware sees the change */
+	/* wait for actually stopped */
+	retries = 1000;
+	while ((read_reg(PS3_AUDIO_AO_3WMCTRL) &
+		(PS3_AUDIO_AO_3WMCTRL_ASORUN(0) |
+		 PS3_AUDIO_AO_3WMCTRL_ASORUN(1) |
+		 PS3_AUDIO_AO_3WMCTRL_ASORUN(2) |
+		 PS3_AUDIO_AO_3WMCTRL_ASORUN(3))) &&
+	       --retries) {
+		udelay(1);
+	}
+
+	/* reset buffer pointer */
+	for (i = 0; i < 4; i++) {
+		update_reg(PS3_AUDIO_AO_3WCTRL(i),
+			   PS3_AUDIO_AO_3WCTRL_ASOBRST_RESET);
+		udelay(10);
+	}
+	wmb(); /* ensure the hardware actually start resetting */
+
+	/* enable 3wire#0 buffer */
+	update_reg(PS3_AUDIO_AO_3WMCTRL, PS3_AUDIO_AO_3WMCTRL_ASOEN(0));
+
+
+	/* In 24bit mode,ALSA inserts a zero byte at first byte of per sample */
+	update_mask_reg(PS3_AUDIO_AO_3WCTRL(0),
+			~PS3_AUDIO_AO_3WCTRL_ASODF,
+			PS3_AUDIO_AO_3WCTRL_ASODF_LSB);
+	update_mask_reg(PS3_AUDIO_AO_SPDCTRL(0),
+			~PS3_AUDIO_AO_SPDCTRL_SPODF,
+			PS3_AUDIO_AO_SPDCTRL_SPODF_LSB);
+	/* ensure all the setting above is written back to register */
+	wmb();
+	/* avsetting driver altered AX_IE, caller must reset it if you want */
+	pr_debug("%s: end\n", __func__);
+	return ret;
+}
+
+/*
+ *  set sampling rate according to the substream
+ */
+static int snd_ps3_set_avsetting(struct snd_pcm_substream *substream)
+{
+	struct snd_ps3_card_info *card = snd_pcm_substream_chip(substream);
+	struct snd_ps3_avsetting_info avs;
+	int ret;
+
+	avs = card->avs;
+
+	pr_debug("%s: called freq=%d width=%d\n", __func__,
+		 substream->runtime->rate,
+		 snd_pcm_format_width(substream->runtime->format));
+
+	pr_debug("%s: before freq=%d width=%d\n", __func__,
+		 card->avs.avs_audio_rate, card->avs.avs_audio_width);
+
+	/* sample rate */
+	switch (substream->runtime->rate) {
+	case 44100:
+		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_44K;
+		break;
+	case 48000:
+		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K;
+		break;
+	case 88200:
+		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_88K;
+		break;
+	case 96000:
+		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_96K;
+		break;
+	default:
+		pr_info("%s: invalid rate %d\n", __func__,
+			substream->runtime->rate);
+		return 1;
+	}
+
+	/* width */
+	switch (snd_pcm_format_width(substream->runtime->format)) {
+	case 16:
+		avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16;
+		break;
+	case 24:
+		avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_24;
+		break;
+	default:
+		pr_info("%s: invalid width %d\n", __func__,
+			snd_pcm_format_width(substream->runtime->format));
+		return 1;
+	}
+
+	memcpy(avs.avs_cs_info, ps3av_mode_cs_info, 8);
+
+	if (memcmp(&card->avs, &avs, sizeof(avs))) {
+		pr_debug("%s: after freq=%d width=%d\n", __func__,
+			 card->avs.avs_audio_rate, card->avs.avs_audio_width);
+
+		card->avs = avs;
+		snd_ps3_change_avsetting(card);
+		ret = 0;
+	} else
+		ret = 1;
+
+	/* check CS non-audio bit and mute accordingly */
+	if (avs.avs_cs_info[0] & 0x02)
+		ps3av_audio_mute_analog(1); /* mute if non-audio */
+	else
+		ps3av_audio_mute_analog(0);
+
+	return ret;
+}
+
+/*
  * PCM operators
  */
 static int snd_ps3_pcm_open(struct snd_pcm_substream *substream)
@@ -406,6 +543,13 @@
 	return 0;
 };
 
+static int snd_ps3_pcm_close(struct snd_pcm_substream *substream)
+{
+	/* mute on */
+	snd_ps3_mute(1);
+	return 0;
+};
+
 static int snd_ps3_pcm_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_pcm_hw_params *hw_params)
 {
@@ -417,6 +561,13 @@
 	return 0;
 };
 
+static int snd_ps3_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	int ret;
+	ret = snd_pcm_lib_free_pages(substream);
+	return ret;
+};
+
 static int snd_ps3_delay_to_bytes(struct snd_pcm_substream *substream,
 				  unsigned int delay_ms)
 {
@@ -556,202 +707,6 @@
 	return ret;
 };
 
-static int snd_ps3_pcm_hw_free(struct snd_pcm_substream *substream)
-{
-	int ret;
-	ret = snd_pcm_lib_free_pages(substream);
-	return ret;
-};
-
-static int snd_ps3_pcm_close(struct snd_pcm_substream *substream)
-{
-	/* mute on */
-	snd_ps3_mute(1);
-	return 0;
-};
-
-static void snd_ps3_audio_fixup(struct snd_ps3_card_info *card)
-{
-	/*
-	 * avsetting driver seems to never change the followings
-	 * so, init them here once
-	 */
-
-	/* no dma interrupt needed */
-	write_reg(PS3_AUDIO_INTR_EN_0, 0);
-
-	/* use every 4 buffer empty interrupt */
-	update_mask_reg(PS3_AUDIO_AX_IC,
-			PS3_AUDIO_AX_IC_AASOIMD_MASK,
-			PS3_AUDIO_AX_IC_AASOIMD_EVERY4);
-
-	/* enable 3wire clocks */
-	update_mask_reg(PS3_AUDIO_AO_3WMCTRL,
-			~(PS3_AUDIO_AO_3WMCTRL_ASOBCLKD_DISABLED |
-			  PS3_AUDIO_AO_3WMCTRL_ASOLRCKD_DISABLED),
-			0);
-	update_reg(PS3_AUDIO_AO_3WMCTRL,
-		   PS3_AUDIO_AO_3WMCTRL_ASOPLRCK_DEFAULT);
-}
-
-/*
- * av setting
- * NOTE: calling this function may generate audio interrupt.
- */
-static int snd_ps3_change_avsetting(struct snd_ps3_card_info *card)
-{
-	int ret, retries, i;
-	pr_debug("%s: start\n", __func__);
-
-	ret = ps3av_set_audio_mode(card->avs.avs_audio_ch,
-				  card->avs.avs_audio_rate,
-				  card->avs.avs_audio_width,
-				  card->avs.avs_audio_format,
-				  card->avs.avs_audio_source);
-	/*
-	 * Reset the following unwanted settings:
-	 */
-
-	/* disable all 3wire buffers */
-	update_mask_reg(PS3_AUDIO_AO_3WMCTRL,
-			~(PS3_AUDIO_AO_3WMCTRL_ASOEN(0) |
-			  PS3_AUDIO_AO_3WMCTRL_ASOEN(1) |
-			  PS3_AUDIO_AO_3WMCTRL_ASOEN(2) |
-			  PS3_AUDIO_AO_3WMCTRL_ASOEN(3)),
-			0);
-	wmb(); 	/* ensure the hardware sees the change */
-	/* wait for actually stopped */
-	retries = 1000;
-	while ((read_reg(PS3_AUDIO_AO_3WMCTRL) &
-		(PS3_AUDIO_AO_3WMCTRL_ASORUN(0) |
-		 PS3_AUDIO_AO_3WMCTRL_ASORUN(1) |
-		 PS3_AUDIO_AO_3WMCTRL_ASORUN(2) |
-		 PS3_AUDIO_AO_3WMCTRL_ASORUN(3))) &&
-	       --retries) {
-		udelay(1);
-	}
-
-	/* reset buffer pointer */
-	for (i = 0; i < 4; i++) {
-		update_reg(PS3_AUDIO_AO_3WCTRL(i),
-			   PS3_AUDIO_AO_3WCTRL_ASOBRST_RESET);
-		udelay(10);
-	}
-	wmb(); /* ensure the hardware actually start resetting */
-
-	/* enable 3wire#0 buffer */
-	update_reg(PS3_AUDIO_AO_3WMCTRL, PS3_AUDIO_AO_3WMCTRL_ASOEN(0));
-
-
-	/* In 24bit mode,ALSA inserts a zero byte at first byte of per sample */
-	update_mask_reg(PS3_AUDIO_AO_3WCTRL(0),
-			~PS3_AUDIO_AO_3WCTRL_ASODF,
-			PS3_AUDIO_AO_3WCTRL_ASODF_LSB);
-	update_mask_reg(PS3_AUDIO_AO_SPDCTRL(0),
-			~PS3_AUDIO_AO_SPDCTRL_SPODF,
-			PS3_AUDIO_AO_SPDCTRL_SPODF_LSB);
-	/* ensure all the setting above is written back to register */
-	wmb();
-	/* avsetting driver altered AX_IE, caller must reset it if you want */
-	pr_debug("%s: end\n", __func__);
-	return ret;
-}
-
-static int snd_ps3_init_avsetting(struct snd_ps3_card_info *card)
-{
-	int ret;
-	pr_debug("%s: start\n", __func__);
-	card->avs.avs_audio_ch = PS3AV_CMD_AUDIO_NUM_OF_CH_2;
-	card->avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K;
-	card->avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16;
-	card->avs.avs_audio_format = PS3AV_CMD_AUDIO_FORMAT_PCM;
-	card->avs.avs_audio_source = PS3AV_CMD_AUDIO_SOURCE_SERIAL;
-	memcpy(card->avs.avs_cs_info, ps3av_mode_cs_info, 8);
-
-	ret = snd_ps3_change_avsetting(card);
-
-	snd_ps3_audio_fixup(card);
-
-	/* to start to generate SPDIF signal, fill data */
-	snd_ps3_program_dma(card, SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
-	snd_ps3_kick_dma(card);
-	pr_debug("%s: end\n", __func__);
-	return ret;
-}
-
-/*
- *  set sampling rate according to the substream
- */
-static int snd_ps3_set_avsetting(struct snd_pcm_substream *substream)
-{
-	struct snd_ps3_card_info *card = snd_pcm_substream_chip(substream);
-	struct snd_ps3_avsetting_info avs;
-	int ret;
-
-	avs = card->avs;
-
-	pr_debug("%s: called freq=%d width=%d\n", __func__,
-		 substream->runtime->rate,
-		 snd_pcm_format_width(substream->runtime->format));
-
-	pr_debug("%s: before freq=%d width=%d\n", __func__,
-		 card->avs.avs_audio_rate, card->avs.avs_audio_width);
-
-	/* sample rate */
-	switch (substream->runtime->rate) {
-	case 44100:
-		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_44K;
-		break;
-	case 48000:
-		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K;
-		break;
-	case 88200:
-		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_88K;
-		break;
-	case 96000:
-		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_96K;
-		break;
-	default:
-		pr_info("%s: invalid rate %d\n", __func__,
-			substream->runtime->rate);
-		return 1;
-	}
-
-	/* width */
-	switch (snd_pcm_format_width(substream->runtime->format)) {
-	case 16:
-		avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16;
-		break;
-	case 24:
-		avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_24;
-		break;
-	default:
-		pr_info("%s: invalid width %d\n", __func__,
-			snd_pcm_format_width(substream->runtime->format));
-		return 1;
-	}
-
-	memcpy(avs.avs_cs_info, ps3av_mode_cs_info, 8);
-
-	if (memcmp(&card->avs, &avs, sizeof(avs))) {
-		pr_debug("%s: after freq=%d width=%d\n", __func__,
-			 card->avs.avs_audio_rate, card->avs.avs_audio_width);
-
-		card->avs = avs;
-		snd_ps3_change_avsetting(card);
-		ret = 0;
-	} else
-		ret = 1;
-
-	/* check CS non-audio bit and mute accordingly */
-	if (avs.avs_cs_info[0] & 0x02)
-		ps3av_audio_mute_analog(1); /* mute if non-audio */
-	else
-		ps3av_audio_mute_analog(0);
-
-	return ret;
-}
-
 /*
  * SPDIF status bits controls
  */
@@ -798,28 +753,39 @@
 	{
 		.access = SNDRV_CTL_ELEM_ACCESS_READ,
 		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK),
 		.info = snd_ps3_spdif_mask_info,
 		.get = snd_ps3_spdif_cmask_get,
 	},
 	{
 		.access = SNDRV_CTL_ELEM_ACCESS_READ,
 		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PRO_MASK),
 		.info = snd_ps3_spdif_mask_info,
 		.get = snd_ps3_spdif_pmask_get,
 	},
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
 		.info = snd_ps3_spdif_mask_info,
 		.get = snd_ps3_spdif_default_get,
 		.put = snd_ps3_spdif_default_put,
 	},
 };
 
+static struct snd_pcm_ops snd_ps3_pcm_spdif_ops = {
+	.open = snd_ps3_pcm_open,
+	.close = snd_ps3_pcm_close,
+	.ioctl = snd_pcm_lib_ioctl,
+	.hw_params = snd_ps3_pcm_hw_params,
+	.hw_free = snd_ps3_pcm_hw_free,
+	.prepare = snd_ps3_pcm_prepare,
+	.trigger = snd_ps3_pcm_trigger,
+	.pointer = snd_ps3_pcm_pointer,
+};
 
-static int snd_ps3_map_mmio(void)
+
+static int __devinit snd_ps3_map_mmio(void)
 {
 	the_card.mapped_mmio_vaddr =
 		ioremap(the_card.ps3_dev->m_region->bus_addr,
@@ -841,7 +807,7 @@
 	the_card.mapped_mmio_vaddr = NULL;
 }
 
-static int snd_ps3_allocate_irq(void)
+static int __devinit snd_ps3_allocate_irq(void)
 {
 	int ret;
 	u64 lpar_addr, lpar_size;
@@ -899,7 +865,7 @@
 	ps3_irq_plug_destroy(the_card.irq_no);
 }
 
-static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start)
+static void __devinit snd_ps3_audio_set_base_addr(uint64_t ioaddr_start)
 {
 	uint64_t val;
 	int ret;
@@ -915,7 +881,53 @@
 			ret);
 }
 
-static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev)
+static void __devinit snd_ps3_audio_fixup(struct snd_ps3_card_info *card)
+{
+	/*
+	 * avsetting driver seems to never change the followings
+	 * so, init them here once
+	 */
+
+	/* no dma interrupt needed */
+	write_reg(PS3_AUDIO_INTR_EN_0, 0);
+
+	/* use every 4 buffer empty interrupt */
+	update_mask_reg(PS3_AUDIO_AX_IC,
+			PS3_AUDIO_AX_IC_AASOIMD_MASK,
+			PS3_AUDIO_AX_IC_AASOIMD_EVERY4);
+
+	/* enable 3wire clocks */
+	update_mask_reg(PS3_AUDIO_AO_3WMCTRL,
+			~(PS3_AUDIO_AO_3WMCTRL_ASOBCLKD_DISABLED |
+			  PS3_AUDIO_AO_3WMCTRL_ASOLRCKD_DISABLED),
+			0);
+	update_reg(PS3_AUDIO_AO_3WMCTRL,
+		   PS3_AUDIO_AO_3WMCTRL_ASOPLRCK_DEFAULT);
+}
+
+static int __devinit snd_ps3_init_avsetting(struct snd_ps3_card_info *card)
+{
+	int ret;
+	pr_debug("%s: start\n", __func__);
+	card->avs.avs_audio_ch = PS3AV_CMD_AUDIO_NUM_OF_CH_2;
+	card->avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K;
+	card->avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16;
+	card->avs.avs_audio_format = PS3AV_CMD_AUDIO_FORMAT_PCM;
+	card->avs.avs_audio_source = PS3AV_CMD_AUDIO_SOURCE_SERIAL;
+	memcpy(card->avs.avs_cs_info, ps3av_mode_cs_info, 8);
+
+	ret = snd_ps3_change_avsetting(card);
+
+	snd_ps3_audio_fixup(card);
+
+	/* to start to generate SPDIF signal, fill data */
+	snd_ps3_program_dma(card, SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
+	snd_ps3_kick_dma(card);
+	pr_debug("%s: end\n", __func__);
+	return ret;
+}
+
+static int __devinit snd_ps3_driver_probe(struct ps3_system_bus_device *dev)
 {
 	int i, ret;
 	u64 lpar_addr, lpar_size;
@@ -1020,11 +1032,12 @@
 	 * its size should be lager than PS3_AUDIO_FIFO_STAGE_SIZE * 2
 	 * PAGE_SIZE is enogh
 	 */
-	if (!(the_card.null_buffer_start_vaddr =
-	      dma_alloc_coherent(&the_card.ps3_dev->core,
-				 PAGE_SIZE,
-				 &the_card.null_buffer_start_dma_addr,
-				 GFP_KERNEL))) {
+	the_card.null_buffer_start_vaddr =
+		dma_alloc_coherent(&the_card.ps3_dev->core,
+				   PAGE_SIZE,
+				   &the_card.null_buffer_start_dma_addr,
+				   GFP_KERNEL);
+	if (!the_card.null_buffer_start_vaddr) {
 		pr_info("%s: nullbuffer alloc failed\n", __func__);
 		goto clean_preallocate;
 	}
@@ -1115,71 +1128,6 @@
 
 
 /*
- * Interrupt handler
- */
-static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id)
-{
-
-	uint32_t port_intr;
-	int underflow_occured = 0;
-	struct snd_ps3_card_info *card = dev_id;
-
-	if (!card->running) {
-		update_reg(PS3_AUDIO_AX_IS, 0);
-		update_reg(PS3_AUDIO_INTR_0, 0);
-		return IRQ_HANDLED;
-	}
-
-	port_intr = read_reg(PS3_AUDIO_AX_IS);
-	/*
-	 *serial buffer empty detected (every 4 times),
-	 *program next dma and kick it
-	 */
-	if (port_intr & PS3_AUDIO_AX_IE_ASOBEIE(0)) {
-		write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBEIE(0));
-		if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) {
-			write_reg(PS3_AUDIO_AX_IS, port_intr);
-			underflow_occured = 1;
-		}
-		if (card->silent) {
-			/* we are still in silent time */
-			snd_ps3_program_dma(card,
-				(underflow_occured) ?
-				SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL :
-				SND_PS3_DMA_FILLTYPE_SILENT_RUNNING);
-			snd_ps3_kick_dma(card);
-			card->silent --;
-		} else {
-			snd_ps3_program_dma(card,
-				(underflow_occured) ?
-				SND_PS3_DMA_FILLTYPE_FIRSTFILL :
-				SND_PS3_DMA_FILLTYPE_RUNNING);
-			snd_ps3_kick_dma(card);
-			snd_pcm_period_elapsed(card->substream);
-		}
-	} else if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) {
-		write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBUIE(0));
-		/*
-		 * serial out underflow, but buffer empty not detected.
-		 * in this case, fill fifo with 0 to recover.  After
-		 * filling dummy data, serial automatically start to
-		 * consume them and then will generate normal buffer
-		 * empty interrupts.
-		 * If both buffer underflow and buffer empty are occured,
-		 * it is better to do nomal data transfer than empty one
-		 */
-		snd_ps3_program_dma(card,
-				    SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
-		snd_ps3_kick_dma(card);
-		snd_ps3_program_dma(card,
-				    SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
-		snd_ps3_kick_dma(card);
-	}
-	/* clear interrupt cause */
-	return IRQ_HANDLED;
-};
-
-/*
  * module/subsystem initialize/terminate
  */
 static int __init snd_ps3_init(void)
@@ -1197,10 +1145,15 @@
 
 	return ret;
 }
+module_init(snd_ps3_init);
 
 static void __exit snd_ps3_exit(void)
 {
 	ps3_system_bus_driver_unregister(&snd_ps3_bus_driver_info);
 }
+module_exit(snd_ps3_exit);
 
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("PS3 sound driver");
+MODULE_AUTHOR("Sony Computer Entertainment Inc.");
 MODULE_ALIAS(PS3_MODULE_ALIAS_SOUND);
diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c
index 40222fc..08e584d 100644
--- a/sound/ppc/tumbler.c
+++ b/sound/ppc/tumbler.c
@@ -838,7 +838,7 @@
 
 /*
  */
-static struct snd_kcontrol_new tumbler_mixers[] __initdata = {
+static struct snd_kcontrol_new tumbler_mixers[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "Master Playback Volume",
 	  .info = tumbler_info_master_volume,
@@ -862,7 +862,7 @@
 	},
 };
 
-static struct snd_kcontrol_new snapper_mixers[] __initdata = {
+static struct snd_kcontrol_new snapper_mixers[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "Master Playback Volume",
 	  .info = tumbler_info_master_volume,
@@ -895,7 +895,7 @@
 	},
 };
 
-static struct snd_kcontrol_new tumbler_hp_sw __initdata = {
+static struct snd_kcontrol_new tumbler_hp_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "Headphone Playback Switch",
 	.info = snd_pmac_boolean_mono_info,
@@ -903,7 +903,7 @@
 	.put = tumbler_put_mute_switch,
 	.private_value = TUMBLER_MUTE_HP,
 };
-static struct snd_kcontrol_new tumbler_speaker_sw __initdata = {
+static struct snd_kcontrol_new tumbler_speaker_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "PC Speaker Playback Switch",
 	.info = snd_pmac_boolean_mono_info,
@@ -911,7 +911,7 @@
 	.put = tumbler_put_mute_switch,
 	.private_value = TUMBLER_MUTE_AMP,
 };
-static struct snd_kcontrol_new tumbler_lineout_sw __initdata = {
+static struct snd_kcontrol_new tumbler_lineout_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "Line Out Playback Switch",
 	.info = snd_pmac_boolean_mono_info,
@@ -919,7 +919,7 @@
 	.put = tumbler_put_mute_switch,
 	.private_value = TUMBLER_MUTE_LINE,
 };
-static struct snd_kcontrol_new tumbler_drc_sw __initdata = {
+static struct snd_kcontrol_new tumbler_drc_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "DRC Switch",
 	.info = snd_pmac_boolean_mono_info,
@@ -1269,7 +1269,7 @@
 #endif
 
 /* initialize tumbler */
-static int __init tumbler_init(struct snd_pmac *chip)
+static int __devinit tumbler_init(struct snd_pmac *chip)
 {
 	int irq;
 	struct pmac_tumbler *mix = chip->mixer_data;
@@ -1339,7 +1339,7 @@
 }
 
 /* exported */
-int __init snd_pmac_tumbler_init(struct snd_pmac *chip)
+int __devinit snd_pmac_tumbler_init(struct snd_pmac *chip)
 {
 	int i, err;
 	struct pmac_tumbler *mix;
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index 3d2bb6f..d3e786a 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -32,7 +32,9 @@
 source "sound/soc/omap/Kconfig"
 source "sound/soc/pxa/Kconfig"
 source "sound/soc/s3c24xx/Kconfig"
+source "sound/soc/s6000/Kconfig"
 source "sound/soc/sh/Kconfig"
+source "sound/soc/txx9/Kconfig"
 
 # Supported codecs
 source "sound/soc/codecs/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index 0237879..6f1e28d 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -10,4 +10,6 @@
 obj-$(CONFIG_SND_SOC)	+= omap/
 obj-$(CONFIG_SND_SOC)	+= pxa/
 obj-$(CONFIG_SND_SOC)	+= s3c24xx/
+obj-$(CONFIG_SND_SOC)	+= s6000/
 obj-$(CONFIG_SND_SOC)	+= sh/
+obj-$(CONFIG_SND_SOC)	+= txx9/
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index a608d70..e720d5e 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -41,3 +41,11 @@
           and FRAME signals on the PlayPaq.  Unless you want to play
           with the AT32 as the SSC master, you probably want to say N here,
           as this will give you better sound quality.
+
+config SND_AT91_SOC_AFEB9260
+	tristate "SoC Audio support for AFEB9260 board"
+	depends on ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC
+	select SND_ATMEL_SOC_SSC
+	select SND_SOC_TLV320AIC23
+	help
+	  Say Y here to support sound on AFEB9260 board.
diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile
index f54a7cc..e7ea56b 100644
--- a/sound/soc/atmel/Makefile
+++ b/sound/soc/atmel/Makefile
@@ -13,3 +13,4 @@
 
 obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
 obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o
+obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o
diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c
index 7065753..9eb610c 100644
--- a/sound/soc/atmel/playpaq_wm8510.c
+++ b/sound/soc/atmel/playpaq_wm8510.c
@@ -117,7 +117,7 @@
 	 * Find actual rate, compare to requested rate
 	 */
 	actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1));
-	pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n",
+	pr_debug("playpaq_wm8510: Request rate = %u, actual rate = %u\n",
 		 rate, actual_rate);
 
 
diff --git a/sound/soc/atmel/snd-soc-afeb9260.c b/sound/soc/atmel/snd-soc-afeb9260.c
new file mode 100644
index 0000000..23349de
--- /dev/null
+++ b/sound/soc/atmel/snd-soc-afeb9260.c
@@ -0,0 +1,203 @@
+/*
+ * afeb9260.c  --  SoC audio for AFEB9260
+ *
+ * Copyright (C) 2009 Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <linux/atmel-ssc.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <linux/gpio.h>
+
+#include "../codecs/tlv320aic23.h"
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+#define CODEC_CLOCK 	12000000
+
+static int afeb9260_hw_params(struct snd_pcm_substream *substream,
+			 struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int err;
+
+	/* Set codec DAI configuration */
+	err = snd_soc_dai_set_fmt(codec_dai,
+				  SND_SOC_DAIFMT_I2S|
+				  SND_SOC_DAIFMT_NB_IF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (err < 0) {
+		printk(KERN_ERR "can't set codec DAI configuration\n");
+		return err;
+	}
+
+	/* Set cpu DAI configuration */
+	err = snd_soc_dai_set_fmt(cpu_dai,
+				  SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_IF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (err < 0) {
+		printk(KERN_ERR "can't set cpu DAI configuration\n");
+		return err;
+	}
+
+	/* Set the codec system clock for DAC and ADC */
+	err =
+	    snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_CLOCK, SND_SOC_CLOCK_IN);
+
+	if (err < 0) {
+		printk(KERN_ERR "can't set codec system clock\n");
+		return err;
+	}
+
+	return err;
+}
+
+static struct snd_soc_ops afeb9260_ops = {
+	.hw_params = afeb9260_hw_params,
+};
+
+static const struct snd_soc_dapm_widget tlv320aic23_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_LINE("Line In", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	{"Headphone Jack", NULL, "LHPOUT"},
+	{"Headphone Jack", NULL, "RHPOUT"},
+
+	{"LLINEIN", NULL, "Line In"},
+	{"RLINEIN", NULL, "Line In"},
+
+	{"MICIN", NULL, "Mic Jack"},
+};
+
+static int afeb9260_tlv320aic23_init(struct snd_soc_codec *codec)
+{
+
+	/* Add afeb9260 specific widgets */
+	snd_soc_dapm_new_controls(codec, tlv320aic23_dapm_widgets,
+				  ARRAY_SIZE(tlv320aic23_dapm_widgets));
+
+	/* Set up afeb9260 specific audio path audio_map */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+	snd_soc_dapm_enable_pin(codec, "Line In");
+	snd_soc_dapm_enable_pin(codec, "Mic Jack");
+
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link afeb9260_dai = {
+	.name = "TLV320AIC23",
+	.stream_name = "AIC23",
+	.cpu_dai = &atmel_ssc_dai[0],
+	.codec_dai = &tlv320aic23_dai,
+	.init = afeb9260_tlv320aic23_init,
+	.ops = &afeb9260_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_machine_afeb9260 = {
+	.name = "AFEB9260",
+	.platform = &atmel_soc_platform,
+	.dai_link = &afeb9260_dai,
+	.num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device afeb9260_snd_devdata = {
+	.card = &snd_soc_machine_afeb9260,
+	.codec_dev = &soc_codec_dev_tlv320aic23,
+};
+
+static struct platform_device *afeb9260_snd_device;
+
+static int __init afeb9260_soc_init(void)
+{
+	int err;
+	struct device *dev;
+	struct atmel_ssc_info *ssc_p = afeb9260_dai.cpu_dai->private_data;
+	struct ssc_device *ssc = NULL;
+
+	if (!(machine_is_afeb9260()))
+		return -ENODEV;
+
+	ssc = ssc_request(0);
+	if (IS_ERR(ssc)) {
+		printk(KERN_ERR "ASoC: Failed to request SSC 0\n");
+		err = PTR_ERR(ssc);
+		ssc = NULL;
+		goto err_ssc;
+	}
+	ssc_p->ssc = ssc;
+
+	afeb9260_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!afeb9260_snd_device) {
+		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(afeb9260_snd_device, &afeb9260_snd_devdata);
+	afeb9260_snd_devdata.dev = &afeb9260_snd_device->dev;
+	err = platform_device_add(afeb9260_snd_device);
+	if (err)
+		goto err1;
+
+	dev = &afeb9260_snd_device->dev;
+
+	return 0;
+err1:
+	platform_device_del(afeb9260_snd_device);
+	platform_device_put(afeb9260_snd_device);
+err_ssc:
+	return err;
+
+}
+
+static void __exit afeb9260_soc_exit(void)
+{
+	platform_device_unregister(afeb9260_snd_device);
+}
+
+module_init(afeb9260_soc_init);
+module_exit(afeb9260_soc_exit);
+
+MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>");
+MODULE_DESCRIPTION("ALSA SoC for AFEB9260");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/blackfin/bf5xx-ac97.c b/sound/soc/blackfin/bf5xx-ac97.c
index 8a935f2..b1ed423 100644
--- a/sound/soc/blackfin/bf5xx-ac97.c
+++ b/sound/soc/blackfin/bf5xx-ac97.c
@@ -31,6 +31,15 @@
 #include "bf5xx-sport.h"
 #include "bf5xx-ac97.h"
 
+/* Anomaly notes:
+ *  05000250 -	AD1980 is running in TDM mode and RFS/TFS are generated by SPORT
+ *		contrtoller. But, RFSDIV and TFSDIV are always set to 16*16-1,
+ *		while the max AC97 data size is 13*16. The DIV is always larger
+ *		than data size. AD73311 and ad2602 are not running in TDM mode.
+ *		AD1836 and AD73322 depend on external RFS/TFS only. So, this
+ *		anomaly does not affect blackfin sound drivers.
+*/
+
 static int *cmd_count;
 static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM;
 
diff --git a/sound/soc/blackfin/bf5xx-sport.c b/sound/soc/blackfin/bf5xx-sport.c
index b7953c8..469ce7f 100644
--- a/sound/soc/blackfin/bf5xx-sport.c
+++ b/sound/soc/blackfin/bf5xx-sport.c
@@ -190,7 +190,7 @@
 	desc = get_dma_next_desc_ptr(sport->dma_rx_chan);
 	/* Copy the descriptor which will be damaged to backup */
 	temp_desc = *desc;
-	desc->x_count = 0xa;
+	desc->x_count = sport->dummy_count / 2;
 	desc->y_count = 0;
 	desc->next_desc_addr = sport->dummy_rx_desc;
 	local_irq_restore(flags);
@@ -309,7 +309,7 @@
 	desc = get_dma_next_desc_ptr(sport->dma_tx_chan);
 	/* Store the descriptor which will be damaged */
 	temp_desc = *desc;
-	desc->x_count = 0xa;
+	desc->x_count = sport->dummy_count / 2;
 	desc->y_count = 0;
 	desc->next_desc_addr = sport->dummy_tx_desc;
 	local_irq_restore(flags);
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index b6c7f7a..bbc97fd 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -18,7 +18,9 @@
 	select SND_SOC_AK4535 if I2C
 	select SND_SOC_CS4270 if I2C
 	select SND_SOC_PCM3008
+	select SND_SOC_SPDIF
 	select SND_SOC_SSM2602 if I2C
+	select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
 	select SND_SOC_TLV320AIC23 if I2C
 	select SND_SOC_TLV320AIC26 if SPI_MASTER
 	select SND_SOC_TLV320AIC3X if I2C
@@ -35,8 +37,12 @@
 	select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8900 if I2C
 	select SND_SOC_WM8903 if I2C
+	select SND_SOC_WM8940 if I2C
+	select SND_SOC_WM8960 if I2C
 	select SND_SOC_WM8971 if I2C
+	select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8990 if I2C
+	select SND_SOC_WM9081 if I2C
 	select SND_SOC_WM9705 if SND_SOC_AC97_BUS
 	select SND_SOC_WM9712 if SND_SOC_AC97_BUS
 	select SND_SOC_WM9713 if SND_SOC_AC97_BUS
@@ -86,9 +92,15 @@
 config SND_SOC_PCM3008
        tristate
 
+config SND_SOC_SPDIF
+	tristate
+
 config SND_SOC_SSM2602
 	tristate
 
+config SND_SOC_STAC9766
+	tristate
+
 config SND_SOC_TLV320AIC23
 	tristate
 
@@ -138,12 +150,24 @@
 config SND_SOC_WM8903
 	tristate
 
+config SND_SOC_WM8940
+        tristate
+
+config SND_SOC_WM8960
+	tristate
+
 config SND_SOC_WM8971
 	tristate
 
+config SND_SOC_WM8988
+	tristate
+
 config SND_SOC_WM8990
 	tristate
 
+config SND_SOC_WM9081
+	tristate
+
 config SND_SOC_WM9705
 	tristate
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index f265380..8b75305 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -6,7 +6,9 @@
 snd-soc-cs4270-objs := cs4270.o
 snd-soc-l3-objs := l3.o
 snd-soc-pcm3008-objs := pcm3008.o
+snd-soc-spdif-objs := spdif_transciever.o
 snd-soc-ssm2602-objs := ssm2602.o
+snd-soc-stac9766-objs := stac9766.o
 snd-soc-tlv320aic23-objs := tlv320aic23.o
 snd-soc-tlv320aic26-objs := tlv320aic26.o
 snd-soc-tlv320aic3x-objs := tlv320aic3x.o
@@ -23,8 +25,12 @@
 snd-soc-wm8753-objs := wm8753.o
 snd-soc-wm8900-objs := wm8900.o
 snd-soc-wm8903-objs := wm8903.o
+snd-soc-wm8940-objs := wm8940.o
+snd-soc-wm8960-objs := wm8960.o
 snd-soc-wm8971-objs := wm8971.o
+snd-soc-wm8988-objs := wm8988.o
 snd-soc-wm8990-objs := wm8990.o
+snd-soc-wm9081-objs := wm9081.o
 snd-soc-wm9705-objs := wm9705.o
 snd-soc-wm9712-objs := wm9712.o
 snd-soc-wm9713-objs := wm9713.o
@@ -37,7 +43,9 @@
 obj-$(CONFIG_SND_SOC_CS4270)	+= snd-soc-cs4270.o
 obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o
 obj-$(CONFIG_SND_SOC_PCM3008)	+= snd-soc-pcm3008.o
+obj-$(CONFIG_SND_SOC_SPDIF)	+= snd-soc-spdif.o
 obj-$(CONFIG_SND_SOC_SSM2602)	+= snd-soc-ssm2602.o
+obj-$(CONFIG_SND_SOC_STAC9766)	+= snd-soc-stac9766.o
 obj-$(CONFIG_SND_SOC_TLV320AIC23)	+= snd-soc-tlv320aic23.o
 obj-$(CONFIG_SND_SOC_TLV320AIC26)	+= snd-soc-tlv320aic26.o
 obj-$(CONFIG_SND_SOC_TLV320AIC3X)	+= snd-soc-tlv320aic3x.o
@@ -55,7 +63,11 @@
 obj-$(CONFIG_SND_SOC_WM8900)	+= snd-soc-wm8900.o
 obj-$(CONFIG_SND_SOC_WM8903)	+= snd-soc-wm8903.o
 obj-$(CONFIG_SND_SOC_WM8971)	+= snd-soc-wm8971.o
+obj-$(CONFIG_SND_SOC_WM8940)	+= snd-soc-wm8940.o
+obj-$(CONFIG_SND_SOC_WM8960)	+= snd-soc-wm8960.o
+obj-$(CONFIG_SND_SOC_WM8988)	+= snd-soc-wm8988.o
 obj-$(CONFIG_SND_SOC_WM8990)	+= snd-soc-wm8990.o
+obj-$(CONFIG_SND_SOC_WM9081)	+= snd-soc-wm9081.o
 obj-$(CONFIG_SND_SOC_WM9705)	+= snd-soc-wm9705.o
 obj-$(CONFIG_SND_SOC_WM9712)	+= snd-soc-wm9712.o
 obj-$(CONFIG_SND_SOC_WM9713)	+= snd-soc-wm9713.o
diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c
index b0d4af1..932299b 100644
--- a/sound/soc/codecs/ac97.c
+++ b/sound/soc/codecs/ac97.c
@@ -53,13 +53,13 @@
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = STD_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.capture = {
 		.stream_name = "AC97 Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = STD_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &ac97_dai_ops,
 };
 EXPORT_SYMBOL_GPL(ac97_dai);
diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c
index ddb3b08..d7440a9 100644
--- a/sound/soc/codecs/ad1980.c
+++ b/sound/soc/codecs/ad1980.c
@@ -137,13 +137,13 @@
 		.channels_min = 2,
 		.channels_max = 6,
 		.rates = SNDRV_PCM_RATE_48000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
+		.formats = SND_SOC_STD_AC97_FMTS, },
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 2,
 		.channels_max = 2,
 		.rates = SNDRV_PCM_RATE_48000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
+		.formats = SND_SOC_STD_AC97_FMTS, },
 };
 EXPORT_SYMBOL_GPL(ad1980_dai);
 
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 7fa09a3..a32b822 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -18,7 +18,7 @@
  * - The machine driver's 'startup' function must call
  *   cs4270_set_dai_sysclk() with the value of MCLK.
  * - Only I2S and left-justified modes are supported
- * - Power management is not supported
+ * - Power management is supported
  */
 
 #include <linux/module.h>
@@ -27,6 +27,7 @@
 #include <sound/soc.h>
 #include <sound/initval.h>
 #include <linux/i2c.h>
+#include <linux/delay.h>
 
 #include "cs4270.h"
 
@@ -56,6 +57,7 @@
 #define CS4270_FIRSTREG	0x01
 #define CS4270_LASTREG	0x08
 #define CS4270_NUMREGS	(CS4270_LASTREG - CS4270_FIRSTREG + 1)
+#define CS4270_I2C_INCR	0x80
 
 /* Bit masks for the CS4270 registers */
 #define CS4270_CHIPID_ID	0xF0
@@ -64,6 +66,8 @@
 #define CS4270_PWRCTL_PDN_ADC	0x20
 #define CS4270_PWRCTL_PDN_DAC	0x02
 #define CS4270_PWRCTL_PDN	0x01
+#define CS4270_PWRCTL_PDN_ALL	\
+	(CS4270_PWRCTL_PDN_ADC | CS4270_PWRCTL_PDN_DAC | CS4270_PWRCTL_PDN)
 #define CS4270_MODE_SPEED_MASK	0x30
 #define CS4270_MODE_1X		0x00
 #define CS4270_MODE_2X		0x10
@@ -109,6 +113,7 @@
 	unsigned int mclk; /* Input frequency of the MCLK pin */
 	unsigned int mode; /* The mode (I2S or left-justified) */
 	unsigned int slave_mode;
+	unsigned int manual_mute;
 };
 
 /**
@@ -295,7 +300,7 @@
 	s32 length;
 
 	length = i2c_smbus_read_i2c_block_data(i2c_client,
-		CS4270_FIRSTREG | 0x80, CS4270_NUMREGS, cache);
+		CS4270_FIRSTREG | CS4270_I2C_INCR, CS4270_NUMREGS, cache);
 
 	if (length != CS4270_NUMREGS) {
 		dev_err(codec->dev, "i2c read failure, addr=0x%x\n",
@@ -453,7 +458,7 @@
 }
 
 /**
- * cs4270_mute - enable/disable the CS4270 external mute
+ * cs4270_dai_mute - enable/disable the CS4270 external mute
  * @dai: the SOC DAI
  * @mute: 0 = disable mute, 1 = enable mute
  *
@@ -462,21 +467,52 @@
  * board does not have the MUTEA or MUTEB pins connected to such circuitry,
  * then this function will do nothing.
  */
-static int cs4270_mute(struct snd_soc_dai *dai, int mute)
+static int cs4270_dai_mute(struct snd_soc_dai *dai, int mute)
 {
 	struct snd_soc_codec *codec = dai->codec;
+	struct cs4270_private *cs4270 = codec->private_data;
 	int reg6;
 
 	reg6 = snd_soc_read(codec, CS4270_MUTE);
 
 	if (mute)
 		reg6 |= CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B;
-	else
+	else {
 		reg6 &= ~(CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B);
+		reg6 |= cs4270->manual_mute;
+	}
 
 	return snd_soc_write(codec, CS4270_MUTE, reg6);
 }
 
+/**
+ * cs4270_soc_put_mute - put callback for the 'Master Playback switch'
+ * 			 alsa control.
+ * @kcontrol: mixer control
+ * @ucontrol: control element information
+ *
+ * This function basically passes the arguments on to the generic
+ * snd_soc_put_volsw() function and saves the mute information in
+ * our private data structure. This is because we want to prevent
+ * cs4270_dai_mute() neglecting the user's decision to manually
+ * mute the codec's output.
+ *
+ * Returns 0 for success.
+ */
+static int cs4270_soc_put_mute(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct cs4270_private *cs4270 = codec->private_data;
+	int left = !ucontrol->value.integer.value[0];
+	int right = !ucontrol->value.integer.value[1];
+
+	cs4270->manual_mute = (left ? CS4270_MUTE_DAC_A : 0) |
+			      (right ? CS4270_MUTE_DAC_B : 0);
+
+	return snd_soc_put_volsw(kcontrol, ucontrol);
+}
+
 /* A list of non-DAPM controls that the CS4270 supports */
 static const struct snd_kcontrol_new cs4270_snd_controls[] = {
 	SOC_DOUBLE_R("Master Playback Volume",
@@ -486,7 +522,9 @@
 	SOC_SINGLE("Zero Cross Switch", CS4270_TRANS, 5, 1, 0),
 	SOC_SINGLE("Popguard Switch", CS4270_MODE, 0, 1, 1),
 	SOC_SINGLE("Auto-Mute Switch", CS4270_MUTE, 5, 1, 0),
-	SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 0)
+	SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 1),
+	SOC_DOUBLE_EXT("Master Playback Switch", CS4270_MUTE, 0, 1, 1, 1,
+		snd_soc_get_volsw, cs4270_soc_put_mute),
 };
 
 /*
@@ -506,7 +544,7 @@
 	.hw_params	= cs4270_hw_params,
 	.set_sysclk	= cs4270_set_dai_sysclk,
 	.set_fmt	= cs4270_set_dai_fmt,
-	.digital_mute	= cs4270_mute,
+	.digital_mute	= cs4270_dai_mute,
 };
 
 struct snd_soc_dai cs4270_dai = {
@@ -753,6 +791,57 @@
 };
 MODULE_DEVICE_TABLE(i2c, cs4270_id);
 
+#ifdef CONFIG_PM
+
+/* This suspend/resume implementation can handle both - a simple standby
+ * where the codec remains powered, and a full suspend, where the voltage
+ * domain the codec is connected to is teared down and/or any other hardware
+ * reset condition is asserted.
+ *
+ * The codec's own power saving features are enabled in the suspend callback,
+ * and all registers are written back to the hardware when resuming.
+ */
+
+static int cs4270_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	struct cs4270_private *cs4270 = i2c_get_clientdata(client);
+	struct snd_soc_codec *codec = &cs4270->codec;
+	int reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
+
+	return snd_soc_write(codec, CS4270_PWRCTL, reg);
+}
+
+static int cs4270_i2c_resume(struct i2c_client *client)
+{
+	struct cs4270_private *cs4270 = i2c_get_clientdata(client);
+	struct snd_soc_codec *codec = &cs4270->codec;
+	int reg;
+
+	/* In case the device was put to hard reset during sleep, we need to
+	 * wait 500ns here before any I2C communication. */
+	ndelay(500);
+
+	/* first restore the entire register cache ... */
+	for (reg = CS4270_FIRSTREG; reg <= CS4270_LASTREG; reg++) {
+		u8 val = snd_soc_read(codec, reg);
+
+		if (i2c_smbus_write_byte_data(client, reg, val)) {
+			dev_err(codec->dev, "i2c write failed\n");
+			return -EIO;
+		}
+	}
+
+	/* ... then disable the power-down bits */
+	reg = snd_soc_read(codec, CS4270_PWRCTL);
+	reg &= ~CS4270_PWRCTL_PDN_ALL;
+
+	return snd_soc_write(codec, CS4270_PWRCTL, reg);
+}
+#else
+#define cs4270_i2c_suspend	NULL
+#define cs4270_i2c_resume	NULL
+#endif /* CONFIG_PM */
+
 /*
  * cs4270_i2c_driver - I2C device identification
  *
@@ -767,6 +856,8 @@
 	.id_table = cs4270_id,
 	.probe = cs4270_i2c_probe,
 	.remove = cs4270_i2c_remove,
+	.suspend = cs4270_i2c_suspend,
+	.resume = cs4270_i2c_resume,
 };
 
 /*
diff --git a/sound/soc/codecs/spdif_transciever.c b/sound/soc/codecs/spdif_transciever.c
new file mode 100644
index 0000000..218b33a
--- /dev/null
+++ b/sound/soc/codecs/spdif_transciever.c
@@ -0,0 +1,71 @@
+/*
+ * ALSA SoC SPDIF DIT driver
+ *
+ *  This driver is used by controllers which can operate in DIT (SPDI/F) where
+ *  no codec is needed.  This file provides stub codec that can be used
+ *  in these configurations. TI DaVinci Audio controller uses this driver.
+ *
+ * Author:      Steve Chen,  <schen@mvista.com>
+ * Copyright:   (C) 2009 MontaVista Software, Inc., <source@mvista.com>
+ * Copyright:   (C) 2009  Texas Instruments, India
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <sound/soc.h>
+#include <sound/pcm.h>
+
+#include "spdif_transciever.h"
+
+#define STUB_RATES	SNDRV_PCM_RATE_8000_96000
+#define STUB_FORMATS	SNDRV_PCM_FMTBIT_S16_LE
+
+struct snd_soc_dai dit_stub_dai = {
+	.name		= "DIT",
+	.playback 	= {
+		.stream_name	= "Playback",
+		.channels_min	= 1,
+		.channels_max	= 384,
+		.rates		= STUB_RATES,
+		.formats	= STUB_FORMATS,
+	},
+};
+
+static int spdif_dit_probe(struct platform_device *pdev)
+{
+	dit_stub_dai.dev = &pdev->dev;
+	return snd_soc_register_dai(&dit_stub_dai);
+}
+
+static int spdif_dit_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_dai(&dit_stub_dai);
+	return 0;
+}
+
+static struct platform_driver spdif_dit_driver = {
+	.probe		= spdif_dit_probe,
+	.remove		= spdif_dit_remove,
+	.driver		= {
+		.name	= "spdif-dit",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init dit_modinit(void)
+{
+	return platform_driver_register(&spdif_dit_driver);
+}
+
+static void __exit dit_exit(void)
+{
+	platform_driver_unregister(&spdif_dit_driver);
+}
+
+module_init(dit_modinit);
+module_exit(dit_exit);
+
diff --git a/sound/soc/codecs/spdif_transciever.h b/sound/soc/codecs/spdif_transciever.h
new file mode 100644
index 0000000..296f2eb
--- /dev/null
+++ b/sound/soc/codecs/spdif_transciever.h
@@ -0,0 +1,17 @@
+/*
+ * ALSA SoC DIT/DIR driver header
+ *
+ * Author:      Steve Chen,  <schen@mvista.com>
+ * Copyright:   (C) 2008 MontaVista Software, Inc., <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef CODEC_STUBS_H
+#define CODEC_STUBS_H
+
+extern struct snd_soc_dai dit_stub_dai;
+
+#endif /* CODEC_STUBS_H */
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index 87f606c7..1fc4c8e 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -336,15 +336,17 @@
 			master_runtime->sample_bits,
 			master_runtime->rate);
 
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_RATE,
-					     master_runtime->rate,
-					     master_runtime->rate);
+		if (master_runtime->rate != 0)
+			snd_pcm_hw_constraint_minmax(substream->runtime,
+						     SNDRV_PCM_HW_PARAM_RATE,
+						     master_runtime->rate,
+						     master_runtime->rate);
 
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
-					     master_runtime->sample_bits,
-					     master_runtime->sample_bits);
+		if (master_runtime->sample_bits != 0)
+			snd_pcm_hw_constraint_minmax(substream->runtime,
+						     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+						     master_runtime->sample_bits,
+						     master_runtime->sample_bits);
 
 		ssm2602->slave_substream = substream;
 	} else
@@ -372,6 +374,11 @@
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->card->codec;
 	struct ssm2602_priv *ssm2602 = codec->private_data;
+
+	if (ssm2602->master_substream == substream)
+		ssm2602->master_substream = ssm2602->slave_substream;
+
+	ssm2602->slave_substream = NULL;
 	/* deactivate */
 	if (!codec->active)
 		ssm2602_write(codec, SSM2602_ACTIVE, 0);
@@ -497,11 +504,9 @@
 	return 0;
 }
 
-#define SSM2602_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
-		SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
-		SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
-		SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
-		SNDRV_PCM_RATE_96000)
+#define SSM2602_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_32000 |\
+		SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+		SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
 
 #define SSM2602_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
 		SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c
new file mode 100644
index 0000000..8ad4b7b
--- /dev/null
+++ b/sound/soc/codecs/stac9766.c
@@ -0,0 +1,463 @@
+/*
+ * stac9766.c  --  ALSA SoC STAC9766 codec support
+ *
+ * Copyright 2009 Jon Smirl, Digispeaker
+ * Author: Jon Smirl <jonsmirl@gmail.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  Features:-
+ *
+ *   o Support for AC97 Codec, S/PDIF
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <sound/soc-of-simple.h>
+
+#include "stac9766.h"
+
+#define STAC9766_VERSION "0.10"
+
+/*
+ * STAC9766 register cache
+ */
+static const u16 stac9766_reg[] = {
+	0x6A90, 0x8000, 0x8000, 0x8000, /* 6 */
+	0x0000, 0x0000, 0x8008, 0x8008, /* e */
+	0x8808, 0x8808, 0x8808, 0x8808, /* 16 */
+	0x8808, 0x0000, 0x8000, 0x0000, /* 1e */
+	0x0000, 0x0000, 0x0000, 0x000f, /* 26 */
+	0x0a05, 0x0400, 0xbb80, 0x0000, /* 2e */
+	0x0000, 0xbb80, 0x0000, 0x0000, /* 36 */
+	0x0000, 0x2000, 0x0000, 0x0100, /* 3e */
+	0x0000, 0x0000, 0x0080, 0x0000, /* 46 */
+	0x0000, 0x0000, 0x0003, 0xffff, /* 4e */
+	0x0000, 0x0000, 0x0000, 0x0000, /* 56 */
+	0x4000, 0x0000, 0x0000, 0x0000, /* 5e */
+	0x1201, 0xFFFF, 0xFFFF, 0x0000, /* 66 */
+	0x0000, 0x0000, 0x0000, 0x0000, /* 6e */
+	0x0000, 0x0000, 0x0000, 0x0006, /* 76 */
+	0x0000, 0x0000, 0x0000, 0x0000, /* 7e */
+};
+
+static const char *stac9766_record_mux[] = {"Mic", "CD", "Video", "AUX",
+			"Line", "Stereo Mix", "Mono Mix", "Phone"};
+static const char *stac9766_mono_mux[] = {"Mix", "Mic"};
+static const char *stac9766_mic_mux[] = {"Mic1", "Mic2"};
+static const char *stac9766_SPDIF_mux[] = {"PCM", "ADC Record"};
+static const char *stac9766_popbypass_mux[] = {"Normal", "Bypass Mixer"};
+static const char *stac9766_record_all_mux[] = {"All analog",
+	"Analog plus DAC"};
+static const char *stac9766_boost1[] = {"0dB", "10dB"};
+static const char *stac9766_boost2[] = {"0dB", "20dB"};
+static const char *stac9766_stereo_mic[] = {"Off", "On"};
+
+static const struct soc_enum stac9766_record_enum =
+	SOC_ENUM_DOUBLE(AC97_REC_SEL, 8, 0, 8, stac9766_record_mux);
+static const struct soc_enum stac9766_mono_enum =
+	SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 9, 2, stac9766_mono_mux);
+static const struct soc_enum stac9766_mic_enum =
+	SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 8, 2, stac9766_mic_mux);
+static const struct soc_enum stac9766_SPDIF_enum =
+	SOC_ENUM_SINGLE(AC97_STAC_DA_CONTROL, 1, 2, stac9766_SPDIF_mux);
+static const struct soc_enum stac9766_popbypass_enum =
+	SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 15, 2, stac9766_popbypass_mux);
+static const struct soc_enum stac9766_record_all_enum =
+	SOC_ENUM_SINGLE(AC97_STAC_ANALOG_SPECIAL, 12, 2,
+			stac9766_record_all_mux);
+static const struct soc_enum stac9766_boost1_enum =
+	SOC_ENUM_SINGLE(AC97_MIC, 6, 2, stac9766_boost1); /* 0/10dB */
+static const struct soc_enum stac9766_boost2_enum =
+	SOC_ENUM_SINGLE(AC97_STAC_ANALOG_SPECIAL, 2, 2, stac9766_boost2); /* 0/20dB */
+static const struct soc_enum stac9766_stereo_mic_enum =
+	SOC_ENUM_SINGLE(AC97_STAC_STEREO_MIC, 2, 1, stac9766_stereo_mic);
+
+static const DECLARE_TLV_DB_LINEAR(master_tlv, -4600, 0);
+static const DECLARE_TLV_DB_LINEAR(record_tlv, 0, 2250);
+static const DECLARE_TLV_DB_LINEAR(beep_tlv, -4500, 0);
+static const DECLARE_TLV_DB_LINEAR(mix_tlv, -3450, 1200);
+
+static const struct snd_kcontrol_new stac9766_snd_ac97_controls[] = {
+	SOC_DOUBLE_TLV("Speaker Volume", AC97_MASTER, 8, 0, 31, 1, master_tlv),
+	SOC_SINGLE("Speaker Switch", AC97_MASTER, 15, 1, 1),
+	SOC_DOUBLE_TLV("Headphone Volume", AC97_HEADPHONE, 8, 0, 31, 1,
+		       master_tlv),
+	SOC_SINGLE("Headphone Switch", AC97_HEADPHONE, 15, 1, 1),
+	SOC_SINGLE_TLV("Mono Out Volume", AC97_MASTER_MONO, 0, 31, 1,
+		       master_tlv),
+	SOC_SINGLE("Mono Out Switch", AC97_MASTER_MONO, 15, 1, 1),
+
+	SOC_DOUBLE_TLV("Record Volume", AC97_REC_GAIN, 8, 0, 15, 0, record_tlv),
+	SOC_SINGLE("Record Switch", AC97_REC_GAIN, 15, 1, 1),
+
+
+	SOC_SINGLE_TLV("Beep Volume", AC97_PC_BEEP, 1, 15, 1, beep_tlv),
+	SOC_SINGLE("Beep Switch", AC97_PC_BEEP, 15, 1, 1),
+	SOC_SINGLE("Beep Frequency", AC97_PC_BEEP, 5, 127, 1),
+	SOC_SINGLE_TLV("Phone Volume", AC97_PHONE, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("Phone Switch", AC97_PHONE, 15, 1, 1),
+
+	SOC_ENUM("Mic Boost1", stac9766_boost1_enum),
+	SOC_ENUM("Mic Boost2", stac9766_boost2_enum),
+	SOC_SINGLE_TLV("Mic Volume", AC97_MIC, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("Mic Switch", AC97_MIC, 15, 1, 1),
+	SOC_ENUM("Stereo Mic", stac9766_stereo_mic_enum),
+
+	SOC_DOUBLE_TLV("Line Volume", AC97_LINE, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("Line Switch", AC97_LINE, 15, 1, 1),
+	SOC_DOUBLE_TLV("CD Volume", AC97_CD, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("CD Switch", AC97_CD, 15, 1, 1),
+	SOC_DOUBLE_TLV("AUX Volume", AC97_AUX, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("AUX Switch", AC97_AUX, 15, 1, 1),
+	SOC_DOUBLE_TLV("Video Volume", AC97_VIDEO, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("Video Switch", AC97_VIDEO, 15, 1, 1),
+
+	SOC_DOUBLE_TLV("DAC Volume", AC97_PCM, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("DAC Switch", AC97_PCM, 15, 1, 1),
+	SOC_SINGLE("Loopback Test Switch", AC97_GENERAL_PURPOSE, 7, 1, 0),
+	SOC_SINGLE("3D Volume", AC97_3D_CONTROL, 3, 2, 1),
+	SOC_SINGLE("3D Switch", AC97_GENERAL_PURPOSE, 13, 1, 0),
+
+	SOC_ENUM("SPDIF Mux", stac9766_SPDIF_enum),
+	SOC_ENUM("Mic1/2 Mux", stac9766_mic_enum),
+	SOC_ENUM("Record All Mux", stac9766_record_all_enum),
+	SOC_ENUM("Record Mux", stac9766_record_enum),
+	SOC_ENUM("Mono Mux", stac9766_mono_enum),
+	SOC_ENUM("Pop Bypass Mux", stac9766_popbypass_enum),
+};
+
+static int stac9766_ac97_write(struct snd_soc_codec *codec, unsigned int reg,
+			       unsigned int val)
+{
+	u16 *cache = codec->reg_cache;
+
+	if (reg > AC97_STAC_PAGE0) {
+		stac9766_ac97_write(codec, AC97_INT_PAGING, 0);
+		soc_ac97_ops.write(codec->ac97, reg, val);
+		stac9766_ac97_write(codec, AC97_INT_PAGING, 1);
+		return 0;
+	}
+	if (reg / 2 > ARRAY_SIZE(stac9766_reg))
+		return -EIO;
+
+	soc_ac97_ops.write(codec->ac97, reg, val);
+	cache[reg / 2] = val;
+	return 0;
+}
+
+static unsigned int stac9766_ac97_read(struct snd_soc_codec *codec,
+				       unsigned int reg)
+{
+	u16 val = 0, *cache = codec->reg_cache;
+
+	if (reg > AC97_STAC_PAGE0) {
+		stac9766_ac97_write(codec, AC97_INT_PAGING, 0);
+		val = soc_ac97_ops.read(codec->ac97, reg - AC97_STAC_PAGE0);
+		stac9766_ac97_write(codec, AC97_INT_PAGING, 1);
+		return val;
+	}
+	if (reg / 2 > ARRAY_SIZE(stac9766_reg))
+		return -EIO;
+
+	if (reg == AC97_RESET || reg == AC97_GPIO_STATUS ||
+		reg == AC97_INT_PAGING || reg == AC97_VENDOR_ID1 ||
+		reg == AC97_VENDOR_ID2) {
+
+		val = soc_ac97_ops.read(codec->ac97, reg);
+		return val;
+	}
+	return cache[reg / 2];
+}
+
+static int ac97_analog_prepare(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	unsigned short reg, vra;
+
+	vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS);
+
+	vra |= 0x1; /* enable variable rate audio */
+
+	stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		reg = AC97_PCM_FRONT_DAC_RATE;
+	else
+		reg = AC97_PCM_LR_ADC_RATE;
+
+	return stac9766_ac97_write(codec, reg, runtime->rate);
+}
+
+static int ac97_digital_prepare(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	unsigned short reg, vra;
+
+	stac9766_ac97_write(codec, AC97_SPDIF, 0x2002);
+
+	vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS);
+	vra |= 0x5; /* Enable VRA and SPDIF out */
+
+	stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra);
+
+	reg = AC97_PCM_FRONT_DAC_RATE;
+
+	return stac9766_ac97_write(codec, reg, runtime->rate);
+}
+
+static int ac97_digital_trigger(struct snd_pcm_substream *substream,
+				int cmd, struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	unsigned short vra;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_STOP:
+		vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS);
+		vra &= !0x04;
+		stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra);
+		break;
+	}
+	return 0;
+}
+
+static int stac9766_set_bias_level(struct snd_soc_codec *codec,
+				   enum snd_soc_bias_level level)
+{
+	switch (level) {
+	case SND_SOC_BIAS_ON: /* full On */
+	case SND_SOC_BIAS_PREPARE: /* partial On */
+	case SND_SOC_BIAS_STANDBY: /* Off, with power */
+		stac9766_ac97_write(codec, AC97_POWERDOWN, 0x0000);
+		break;
+	case SND_SOC_BIAS_OFF: /* Off, without power */
+		/* disable everything including AC link */
+		stac9766_ac97_write(codec, AC97_POWERDOWN, 0xffff);
+		break;
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+static int stac9766_reset(struct snd_soc_codec *codec, int try_warm)
+{
+	if (try_warm && soc_ac97_ops.warm_reset) {
+		soc_ac97_ops.warm_reset(codec->ac97);
+		if (stac9766_ac97_read(codec, 0) == stac9766_reg[0])
+			return 1;
+	}
+
+	soc_ac97_ops.reset(codec->ac97);
+	if (soc_ac97_ops.warm_reset)
+		soc_ac97_ops.warm_reset(codec->ac97);
+	if (stac9766_ac97_read(codec, 0) != stac9766_reg[0])
+		return -EIO;
+	return 0;
+}
+
+static int stac9766_codec_suspend(struct platform_device *pdev,
+				  pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	stac9766_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int stac9766_codec_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 id, reset;
+
+	reset = 0;
+	/* give the codec an AC97 warm reset to start the link */
+reset:
+	if (reset > 5) {
+		printk(KERN_ERR "stac9766 failed to resume");
+		return -EIO;
+	}
+	codec->ac97->bus->ops->warm_reset(codec->ac97);
+	id = soc_ac97_ops.read(codec->ac97, AC97_VENDOR_ID2);
+	if (id != 0x4c13) {
+		stac9766_reset(codec, 0);
+		reset++;
+		goto reset;
+	}
+	stac9766_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	if (codec->suspend_bias_level == SND_SOC_BIAS_ON)
+		stac9766_set_bias_level(codec, SND_SOC_BIAS_ON);
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops stac9766_dai_ops_analog = {
+	.prepare = ac97_analog_prepare,
+};
+
+static struct snd_soc_dai_ops stac9766_dai_ops_digital = {
+	.prepare = ac97_digital_prepare,
+	.trigger = ac97_digital_trigger,
+};
+
+struct snd_soc_dai stac9766_dai[] = {
+{
+	.name = "stac9766 analog",
+	.id = 0,
+	.ac97_control = 1,
+
+	/* stream cababilities */
+	.playback = {
+		.stream_name = "stac9766 analog",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = SND_SOC_STD_AC97_FMTS,
+	},
+	.capture = {
+		.stream_name = "stac9766 analog",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = SND_SOC_STD_AC97_FMTS,
+	},
+	/* alsa ops */
+	.ops = &stac9766_dai_ops_analog,
+},
+{
+	.name = "stac9766 IEC958",
+	.id = 1,
+	.ac97_control = 1,
+
+	/* stream cababilities */
+	.playback = {
+		.stream_name = "stac9766 IEC958",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_32000 | \
+			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE,
+	},
+	/* alsa ops */
+	.ops = &stac9766_dai_ops_digital,
+}
+};
+EXPORT_SYMBOL_GPL(stac9766_dai);
+
+static int stac9766_codec_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	printk(KERN_INFO "STAC9766 SoC Audio Codec %s\n", STAC9766_VERSION);
+
+	socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (socdev->card->codec == NULL)
+		return -ENOMEM;
+	codec = socdev->card->codec;
+	mutex_init(&codec->mutex);
+
+	codec->reg_cache = kmemdup(stac9766_reg, sizeof(stac9766_reg),
+				   GFP_KERNEL);
+	if (codec->reg_cache == NULL) {
+		ret = -ENOMEM;
+		goto cache_err;
+	}
+	codec->reg_cache_size = sizeof(stac9766_reg);
+	codec->reg_cache_step = 2;
+
+	codec->name = "STAC9766";
+	codec->owner = THIS_MODULE;
+	codec->dai = stac9766_dai;
+	codec->num_dai = ARRAY_SIZE(stac9766_dai);
+	codec->write = stac9766_ac97_write;
+	codec->read = stac9766_ac97_read;
+	codec->set_bias_level = stac9766_set_bias_level;
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
+	if (ret < 0)
+		goto codec_err;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0)
+		goto pcm_err;
+
+	/* do a cold reset for the controller and then try
+	 * a warm reset followed by an optional cold reset for codec */
+	stac9766_reset(codec, 0);
+	ret = stac9766_reset(codec, 1);
+	if (ret < 0) {
+		printk(KERN_ERR "Failed to reset STAC9766: AC97 link error\n");
+		goto reset_err;
+	}
+
+	stac9766_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	snd_soc_add_controls(codec, stac9766_snd_ac97_controls,
+			     ARRAY_SIZE(stac9766_snd_ac97_controls));
+
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0)
+		goto reset_err;
+	return 0;
+
+reset_err:
+	snd_soc_free_pcms(socdev);
+pcm_err:
+	snd_soc_free_ac97_codec(codec);
+codec_err:
+	kfree(codec->private_data);
+cache_err:
+	kfree(socdev->card->codec);
+	socdev->card->codec = NULL;
+	return ret;
+}
+
+static int stac9766_codec_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	if (codec == NULL)
+		return 0;
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_free_ac97_codec(codec);
+	kfree(codec->reg_cache);
+	kfree(codec);
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_stac9766 = {
+	.probe = stac9766_codec_probe,
+	.remove = stac9766_codec_remove,
+	.suspend = stac9766_codec_suspend,
+	.resume = stac9766_codec_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_stac9766);
+
+MODULE_DESCRIPTION("ASoC stac9766 driver");
+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/stac9766.h b/sound/soc/codecs/stac9766.h
new file mode 100644
index 0000000..65642eb
--- /dev/null
+++ b/sound/soc/codecs/stac9766.h
@@ -0,0 +1,21 @@
+/*
+ * stac9766.h  --  STAC9766 Soc Audio driver
+ */
+
+#ifndef _STAC9766_H
+#define _STAC9766_H
+
+#define AC97_STAC_PAGE0 0x1000
+#define AC97_STAC_DA_CONTROL (AC97_STAC_PAGE0 | 0x6A)
+#define AC97_STAC_ANALOG_SPECIAL (AC97_STAC_PAGE0 | 0x6E)
+#define AC97_STAC_STEREO_MIC 0x78
+
+/* STAC9766 DAI ID's */
+#define STAC9766_DAI_AC97_ANALOG		0
+#define STAC9766_DAI_AC97_DIGITAL		1
+
+extern struct snd_soc_dai stac9766_dai[];
+extern struct snd_soc_codec_device soc_codec_dev_stac9766;
+
+
+#endif
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c
index c3f4afb..0b8dcb5 100644
--- a/sound/soc/codecs/tlv320aic23.c
+++ b/sound/soc/codecs/tlv320aic23.c
@@ -86,7 +86,7 @@
 	 */
 
 	if ((reg < 0 || reg > 9) && (reg != 15)) {
-		printk(KERN_WARNING "%s Invalid register R%d\n", __func__, reg);
+		printk(KERN_WARNING "%s Invalid register R%u\n", __func__, reg);
 		return -1;
 	}
 
@@ -98,7 +98,7 @@
 	if (codec->hw_write(codec->control_data, data, 2) == 2)
 		return 0;
 
-	printk(KERN_ERR "%s cannot write %03x to register R%d\n", __func__,
+	printk(KERN_ERR "%s cannot write %03x to register R%u\n", __func__,
 	       value, reg);
 
 	return -EIO;
@@ -273,14 +273,14 @@
  * Every divisor is a factor of 11*12
  */
 #define SR_MULT (11*12)
-#define A(x) (x) ? (SR_MULT/x) : 0
+#define A(x) (SR_MULT/x)
 static const unsigned char sr_adc_mult_table[] = {
-	A(2), A(2), A(12), A(12),  A(0), A(0), A(3), A(1),
-	A(2), A(2), A(11), A(11),  A(0), A(0), A(0), A(1)
+	A(2), A(2), A(12), A(12),  0, 0, A(3), A(1),
+	A(2), A(2), A(11), A(11),  0, 0, 0, A(1)
 };
 static const unsigned char sr_dac_mult_table[] = {
-	A(2), A(12), A(2), A(12),  A(0), A(0), A(3), A(1),
-	A(2), A(11), A(2), A(11),  A(0), A(0), A(0), A(1)
+	A(2), A(12), A(2), A(12),  0, 0, A(3), A(1),
+	A(2), A(11), A(2), A(11),  0, 0, 0, A(1)
 };
 
 static unsigned get_score(int adc, int adc_l, int adc_h, int need_adc,
@@ -523,6 +523,8 @@
 	case SND_SOC_DAIFMT_I2S:
 		iface_reg |= TLV320AIC23_FOR_I2S;
 		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface_reg |= TLV320AIC23_LRP_ON;
 	case SND_SOC_DAIFMT_DSP_B:
 		iface_reg |= TLV320AIC23_FOR_DSP;
 		break;
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index df7c8c2..4dbb853 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -115,6 +115,7 @@
 	0x00, /* REG_VIBRA_PWM_SET	(0x47)	*/
 	0x00, /* REG_ANAMIC_GAIN	(0x48)	*/
 	0x00, /* REG_MISC_SET_2		(0x49)	*/
+	0x00, /* REG_SW_SHADOW		(0x4A)	- Shadow, non HW register */
 };
 
 /* codec private data */
@@ -125,6 +126,17 @@
 
 	struct snd_pcm_substream *master_substream;
 	struct snd_pcm_substream *slave_substream;
+
+	unsigned int configured;
+	unsigned int rate;
+	unsigned int sample_bits;
+	unsigned int channels;
+
+	unsigned int sysclk;
+
+	/* Headset output state handling */
+	unsigned int hsl_enabled;
+	unsigned int hsr_enabled;
 };
 
 /*
@@ -161,7 +173,11 @@
 			unsigned int reg, unsigned int value)
 {
 	twl4030_write_reg_cache(codec, reg, value);
-	return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, reg);
+	if (likely(reg < TWL4030_REG_SW_SHADOW))
+		return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value,
+					    reg);
+	else
+		return 0;
 }
 
 static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable)
@@ -188,6 +204,7 @@
 
 static void twl4030_init_chip(struct snd_soc_codec *codec)
 {
+	u8 *cache = codec->reg_cache;
 	int i;
 
 	/* clear CODECPDZ prior to setting register defaults */
@@ -195,7 +212,7 @@
 
 	/* set all audio section registers to reasonable defaults */
 	for (i = TWL4030_REG_OPTION; i <= TWL4030_REG_MISC_SET_2; i++)
-		twl4030_write(codec, i,	twl4030_reg[i]);
+		twl4030_write(codec, i,	cache[i]);
 
 }
 
@@ -232,7 +249,7 @@
 					TWL4030_REG_PRECKL_CTL);
 		reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PRECKR_CTL);
 		twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
-					reg_val & (~TWL4030_PRECKL_GAIN),
+					reg_val & (~TWL4030_PRECKR_GAIN),
 					TWL4030_REG_PRECKR_CTL);
 
 		/* Disable PLL */
@@ -316,104 +333,60 @@
 }
 
 /* Earpiece */
-static const char *twl4030_earpiece_texts[] =
-		{"Off", "DACL1", "DACL2", "DACR1"};
-
-static const unsigned int twl4030_earpiece_values[] =
-		{0x0, 0x1, 0x2, 0x4};
-
-static const struct soc_enum twl4030_earpiece_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_EAR_CTL, 1, 0x7,
-			ARRAY_SIZE(twl4030_earpiece_texts),
-			twl4030_earpiece_texts,
-			twl4030_earpiece_values);
-
-static const struct snd_kcontrol_new twl4030_dapm_earpiece_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_earpiece_enum);
+static const struct snd_kcontrol_new twl4030_dapm_earpiece_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_EAR_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_EAR_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_EAR_CTL, 2, 1, 0),
+	SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_EAR_CTL, 3, 1, 0),
+};
 
 /* PreDrive Left */
-static const char *twl4030_predrivel_texts[] =
-		{"Off", "DACL1", "DACL2", "DACR2"};
-
-static const unsigned int twl4030_predrivel_values[] =
-		{0x0, 0x1, 0x2, 0x4};
-
-static const struct soc_enum twl4030_predrivel_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDL_CTL, 1, 0x7,
-			ARRAY_SIZE(twl4030_predrivel_texts),
-			twl4030_predrivel_texts,
-			twl4030_predrivel_values);
-
-static const struct snd_kcontrol_new twl4030_dapm_predrivel_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_predrivel_enum);
+static const struct snd_kcontrol_new twl4030_dapm_predrivel_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_PREDL_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_PREDL_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PREDL_CTL, 2, 1, 0),
+	SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PREDL_CTL, 3, 1, 0),
+};
 
 /* PreDrive Right */
-static const char *twl4030_predriver_texts[] =
-		{"Off", "DACR1", "DACR2", "DACL2"};
-
-static const unsigned int twl4030_predriver_values[] =
-		{0x0, 0x1, 0x2, 0x4};
-
-static const struct soc_enum twl4030_predriver_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDR_CTL, 1, 0x7,
-			ARRAY_SIZE(twl4030_predriver_texts),
-			twl4030_predriver_texts,
-			twl4030_predriver_values);
-
-static const struct snd_kcontrol_new twl4030_dapm_predriver_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_predriver_enum);
+static const struct snd_kcontrol_new twl4030_dapm_predriver_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_PREDR_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_PREDR_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PREDR_CTL, 2, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PREDR_CTL, 3, 1, 0),
+};
 
 /* Headset Left */
-static const char *twl4030_hsol_texts[] =
-		{"Off", "DACL1", "DACL2"};
-
-static const struct soc_enum twl4030_hsol_enum =
-	SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 1,
-			ARRAY_SIZE(twl4030_hsol_texts),
-			twl4030_hsol_texts);
-
-static const struct snd_kcontrol_new twl4030_dapm_hsol_control =
-SOC_DAPM_ENUM("Route", twl4030_hsol_enum);
+static const struct snd_kcontrol_new twl4030_dapm_hsol_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_HS_SEL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_HS_SEL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_HS_SEL, 2, 1, 0),
+};
 
 /* Headset Right */
-static const char *twl4030_hsor_texts[] =
-		{"Off", "DACR1", "DACR2"};
-
-static const struct soc_enum twl4030_hsor_enum =
-	SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 4,
-			ARRAY_SIZE(twl4030_hsor_texts),
-			twl4030_hsor_texts);
-
-static const struct snd_kcontrol_new twl4030_dapm_hsor_control =
-SOC_DAPM_ENUM("Route", twl4030_hsor_enum);
+static const struct snd_kcontrol_new twl4030_dapm_hsor_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_HS_SEL, 3, 1, 0),
+	SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_HS_SEL, 4, 1, 0),
+	SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_HS_SEL, 5, 1, 0),
+};
 
 /* Carkit Left */
-static const char *twl4030_carkitl_texts[] =
-		{"Off", "DACL1", "DACL2"};
-
-static const struct soc_enum twl4030_carkitl_enum =
-	SOC_ENUM_SINGLE(TWL4030_REG_PRECKL_CTL, 1,
-			ARRAY_SIZE(twl4030_carkitl_texts),
-			twl4030_carkitl_texts);
-
-static const struct snd_kcontrol_new twl4030_dapm_carkitl_control =
-SOC_DAPM_ENUM("Route", twl4030_carkitl_enum);
+static const struct snd_kcontrol_new twl4030_dapm_carkitl_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_PRECKL_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_PRECKL_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PRECKL_CTL, 2, 1, 0),
+};
 
 /* Carkit Right */
-static const char *twl4030_carkitr_texts[] =
-		{"Off", "DACR1", "DACR2"};
-
-static const struct soc_enum twl4030_carkitr_enum =
-	SOC_ENUM_SINGLE(TWL4030_REG_PRECKR_CTL, 1,
-			ARRAY_SIZE(twl4030_carkitr_texts),
-			twl4030_carkitr_texts);
-
-static const struct snd_kcontrol_new twl4030_dapm_carkitr_control =
-SOC_DAPM_ENUM("Route", twl4030_carkitr_enum);
+static const struct snd_kcontrol_new twl4030_dapm_carkitr_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_PRECKR_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_PRECKR_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PRECKR_CTL, 2, 1, 0),
+};
 
 /* Handsfree Left */
 static const char *twl4030_handsfreel_texts[] =
-		{"Voice", "DACL1", "DACL2", "DACR2"};
+		{"Voice", "AudioL1", "AudioL2", "AudioR2"};
 
 static const struct soc_enum twl4030_handsfreel_enum =
 	SOC_ENUM_SINGLE(TWL4030_REG_HFL_CTL, 0,
@@ -423,9 +396,13 @@
 static const struct snd_kcontrol_new twl4030_dapm_handsfreel_control =
 SOC_DAPM_ENUM("Route", twl4030_handsfreel_enum);
 
+/* Handsfree Left virtual mute */
+static const struct snd_kcontrol_new twl4030_dapm_handsfreelmute_control =
+	SOC_DAPM_SINGLE("Switch", TWL4030_REG_SW_SHADOW, 0, 1, 0);
+
 /* Handsfree Right */
 static const char *twl4030_handsfreer_texts[] =
-		{"Voice", "DACR1", "DACR2", "DACL2"};
+		{"Voice", "AudioR1", "AudioR2", "AudioL2"};
 
 static const struct soc_enum twl4030_handsfreer_enum =
 	SOC_ENUM_SINGLE(TWL4030_REG_HFR_CTL, 0,
@@ -435,37 +412,48 @@
 static const struct snd_kcontrol_new twl4030_dapm_handsfreer_control =
 SOC_DAPM_ENUM("Route", twl4030_handsfreer_enum);
 
+/* Handsfree Right virtual mute */
+static const struct snd_kcontrol_new twl4030_dapm_handsfreermute_control =
+	SOC_DAPM_SINGLE("Switch", TWL4030_REG_SW_SHADOW, 1, 1, 0);
+
+/* Vibra */
+/* Vibra audio path selection */
+static const char *twl4030_vibra_texts[] =
+		{"AudioL1", "AudioR1", "AudioL2", "AudioR2"};
+
+static const struct soc_enum twl4030_vibra_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 2,
+			ARRAY_SIZE(twl4030_vibra_texts),
+			twl4030_vibra_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_vibra_control =
+SOC_DAPM_ENUM("Route", twl4030_vibra_enum);
+
+/* Vibra path selection: local vibrator (PWM) or audio driven */
+static const char *twl4030_vibrapath_texts[] =
+		{"Local vibrator", "Audio"};
+
+static const struct soc_enum twl4030_vibrapath_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 4,
+			ARRAY_SIZE(twl4030_vibrapath_texts),
+			twl4030_vibrapath_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_vibrapath_control =
+SOC_DAPM_ENUM("Route", twl4030_vibrapath_enum);
+
 /* Left analog microphone selection */
-static const char *twl4030_analoglmic_texts[] =
-		{"Off", "Main mic", "Headset mic", "AUXL", "Carkit mic"};
-
-static const unsigned int twl4030_analoglmic_values[] =
-		{0x0, 0x1, 0x2, 0x4, 0x8};
-
-static const struct soc_enum twl4030_analoglmic_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_ANAMICL, 0, 0xf,
-			ARRAY_SIZE(twl4030_analoglmic_texts),
-			twl4030_analoglmic_texts,
-			twl4030_analoglmic_values);
-
-static const struct snd_kcontrol_new twl4030_dapm_analoglmic_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_analoglmic_enum);
+static const struct snd_kcontrol_new twl4030_dapm_analoglmic_controls[] = {
+	SOC_DAPM_SINGLE("Main mic", TWL4030_REG_ANAMICL, 0, 1, 0),
+	SOC_DAPM_SINGLE("Headset mic", TWL4030_REG_ANAMICL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AUXL", TWL4030_REG_ANAMICL, 2, 1, 0),
+	SOC_DAPM_SINGLE("Carkit mic", TWL4030_REG_ANAMICL, 3, 1, 0),
+};
 
 /* Right analog microphone selection */
-static const char *twl4030_analogrmic_texts[] =
-		{"Off", "Sub mic", "AUXR"};
-
-static const unsigned int twl4030_analogrmic_values[] =
-		{0x0, 0x1, 0x4};
-
-static const struct soc_enum twl4030_analogrmic_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_ANAMICR, 0, 0x5,
-			ARRAY_SIZE(twl4030_analogrmic_texts),
-			twl4030_analogrmic_texts,
-			twl4030_analogrmic_values);
-
-static const struct snd_kcontrol_new twl4030_dapm_analogrmic_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_analogrmic_enum);
+static const struct snd_kcontrol_new twl4030_dapm_analogrmic_controls[] = {
+	SOC_DAPM_SINGLE("Sub mic", TWL4030_REG_ANAMICR, 0, 1, 0),
+	SOC_DAPM_SINGLE("AUXR", TWL4030_REG_ANAMICR, 2, 1, 0),
+};
 
 /* TX1 L/R Analog/Digital microphone selection */
 static const char *twl4030_micpathtx1_texts[] =
@@ -507,6 +495,10 @@
 static const struct snd_kcontrol_new twl4030_dapm_abypassl2_control =
 	SOC_DAPM_SINGLE("Switch", TWL4030_REG_ARXL2_APGA_CTL, 2, 1, 0);
 
+/* Analog bypass for Voice */
+static const struct snd_kcontrol_new twl4030_dapm_abypassv_control =
+	SOC_DAPM_SINGLE("Switch", TWL4030_REG_VDL_APGA_CTL, 2, 1, 0);
+
 /* Digital bypass gain, 0 mutes the bypass */
 static const unsigned int twl4030_dapm_dbypass_tlv[] = {
 	TLV_DB_RANGE_HEAD(2),
@@ -526,6 +518,18 @@
 			TWL4030_REG_ATX2ARXPGA, 0, 7, 0,
 			twl4030_dapm_dbypass_tlv);
 
+/*
+ * Voice Sidetone GAIN volume control:
+ * from -51 to -10 dB in 1 dB steps (mute instead of -51 dB)
+ */
+static DECLARE_TLV_DB_SCALE(twl4030_dapm_dbypassv_tlv, -5100, 100, 1);
+
+/* Digital bypass voice: sidetone (VUL -> VDL)*/
+static const struct snd_kcontrol_new twl4030_dapm_dbypassv_control =
+	SOC_DAPM_SINGLE_TLV("Volume",
+			TWL4030_REG_VSTPGA, 0, 0x29, 0,
+			twl4030_dapm_dbypassv_tlv);
+
 static int micpath_event(struct snd_soc_dapm_widget *w,
 	struct snd_kcontrol *kcontrol, int event)
 {
@@ -556,63 +560,143 @@
 	return 0;
 }
 
-static int handsfree_event(struct snd_soc_dapm_widget *w,
-		struct snd_kcontrol *kcontrol, int event)
+static void handsfree_ramp(struct snd_soc_codec *codec, int reg, int ramp)
 {
-	struct soc_enum *e = (struct soc_enum *)w->kcontrols->private_value;
 	unsigned char hs_ctl;
 
-	hs_ctl = twl4030_read_reg_cache(w->codec, e->reg);
+	hs_ctl = twl4030_read_reg_cache(codec, reg);
 
-	if (hs_ctl & TWL4030_HF_CTL_REF_EN) {
+	if (ramp) {
+		/* HF ramp-up */
+		hs_ctl |= TWL4030_HF_CTL_REF_EN;
+		twl4030_write(codec, reg, hs_ctl);
+		udelay(10);
 		hs_ctl |= TWL4030_HF_CTL_RAMP_EN;
-		twl4030_write(w->codec, e->reg, hs_ctl);
+		twl4030_write(codec, reg, hs_ctl);
+		udelay(40);
 		hs_ctl |= TWL4030_HF_CTL_LOOP_EN;
-		twl4030_write(w->codec, e->reg, hs_ctl);
 		hs_ctl |= TWL4030_HF_CTL_HB_EN;
-		twl4030_write(w->codec, e->reg, hs_ctl);
+		twl4030_write(codec, reg, hs_ctl);
 	} else {
-		hs_ctl &= ~(TWL4030_HF_CTL_RAMP_EN | TWL4030_HF_CTL_LOOP_EN
-				| TWL4030_HF_CTL_HB_EN);
-		twl4030_write(w->codec, e->reg, hs_ctl);
+		/* HF ramp-down */
+		hs_ctl &= ~TWL4030_HF_CTL_LOOP_EN;
+		hs_ctl &= ~TWL4030_HF_CTL_HB_EN;
+		twl4030_write(codec, reg, hs_ctl);
+		hs_ctl &= ~TWL4030_HF_CTL_RAMP_EN;
+		twl4030_write(codec, reg, hs_ctl);
+		udelay(40);
+		hs_ctl &= ~TWL4030_HF_CTL_REF_EN;
+		twl4030_write(codec, reg, hs_ctl);
 	}
+}
 
+static int handsfreelpga_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		handsfree_ramp(w->codec, TWL4030_REG_HFL_CTL, 1);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		handsfree_ramp(w->codec, TWL4030_REG_HFL_CTL, 0);
+		break;
+	}
 	return 0;
 }
 
-static int headsetl_event(struct snd_soc_dapm_widget *w,
+static int handsfreerpga_event(struct snd_soc_dapm_widget *w,
 		struct snd_kcontrol *kcontrol, int event)
 {
-	unsigned char hs_gain, hs_pop;
-
-	/* Save the current volume */
-	hs_gain = twl4030_read_reg_cache(w->codec, TWL4030_REG_HS_GAIN_SET);
-	hs_pop = twl4030_read_reg_cache(w->codec, TWL4030_REG_HS_POPN_SET);
-
 	switch (event) {
 	case SND_SOC_DAPM_POST_PMU:
-		/* Do the anti-pop/bias ramp enable according to the TRM */
-		hs_pop |= TWL4030_VMID_EN;
-		twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop);
-		/* Is this needed? Can we just use whatever gain here? */
-		twl4030_write(w->codec, TWL4030_REG_HS_GAIN_SET,
-				(hs_gain & (~0x0f)) | 0x0a);
-		hs_pop |= TWL4030_RAMP_EN;
-		twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop);
-
-		/* Restore the original volume */
-		twl4030_write(w->codec, TWL4030_REG_HS_GAIN_SET, hs_gain);
+		handsfree_ramp(w->codec, TWL4030_REG_HFR_CTL, 1);
 		break;
 	case SND_SOC_DAPM_POST_PMD:
-		/* Do the anti-pop/bias ramp disable according to the TRM */
+		handsfree_ramp(w->codec, TWL4030_REG_HFR_CTL, 0);
+		break;
+	}
+	return 0;
+}
+
+static void headset_ramp(struct snd_soc_codec *codec, int ramp)
+{
+	unsigned char hs_gain, hs_pop;
+	struct twl4030_priv *twl4030 = codec->private_data;
+	/* Base values for ramp delay calculation: 2^19 - 2^26 */
+	unsigned int ramp_base[] = {524288, 1048576, 2097152, 4194304,
+				    8388608, 16777216, 33554432, 67108864};
+
+	hs_gain = twl4030_read_reg_cache(codec, TWL4030_REG_HS_GAIN_SET);
+	hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
+
+	if (ramp) {
+		/* Headset ramp-up according to the TRM */
+		hs_pop |= TWL4030_VMID_EN;
+		twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+		twl4030_write(codec, TWL4030_REG_HS_GAIN_SET, hs_gain);
+		hs_pop |= TWL4030_RAMP_EN;
+		twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+	} else {
+		/* Headset ramp-down _not_ according to
+		 * the TRM, but in a way that it is working */
 		hs_pop &= ~TWL4030_RAMP_EN;
-		twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+		twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+		/* Wait ramp delay time + 1, so the VMID can settle */
+		mdelay((ramp_base[(hs_pop & TWL4030_RAMP_DELAY) >> 2] /
+			twl4030->sysclk) + 1);
 		/* Bypass the reg_cache to mute the headset */
 		twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
 					hs_gain & (~0x0f),
 					TWL4030_REG_HS_GAIN_SET);
+
 		hs_pop &= ~TWL4030_VMID_EN;
-		twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+		twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+	}
+}
+
+static int headsetlpga_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	struct twl4030_priv *twl4030 = w->codec->private_data;
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		/* Do the ramp-up only once */
+		if (!twl4030->hsr_enabled)
+			headset_ramp(w->codec, 1);
+
+		twl4030->hsl_enabled = 1;
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		/* Do the ramp-down only if both headsetL/R is disabled */
+		if (!twl4030->hsr_enabled)
+			headset_ramp(w->codec, 0);
+
+		twl4030->hsl_enabled = 0;
+		break;
+	}
+	return 0;
+}
+
+static int headsetrpga_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	struct twl4030_priv *twl4030 = w->codec->private_data;
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		/* Do the ramp-up only once */
+		if (!twl4030->hsl_enabled)
+			headset_ramp(w->codec, 1);
+
+		twl4030->hsr_enabled = 1;
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		/* Do the ramp-down only if both headsetL/R is disabled */
+		if (!twl4030->hsl_enabled)
+			headset_ramp(w->codec, 0);
+
+		twl4030->hsr_enabled = 0;
 		break;
 	}
 	return 0;
@@ -624,7 +708,7 @@
 	struct soc_mixer_control *m =
 		(struct soc_mixer_control *)w->kcontrols->private_value;
 	struct twl4030_priv *twl4030 = w->codec->private_data;
-	unsigned char reg;
+	unsigned char reg, misc;
 
 	reg = twl4030_read_reg_cache(w->codec, m->reg);
 
@@ -636,14 +720,34 @@
 		else
 			twl4030->bypass_state &=
 				~(1 << (m->reg - TWL4030_REG_ARXL1_APGA_CTL));
+	} else if (m->reg == TWL4030_REG_VDL_APGA_CTL) {
+		/* Analog voice bypass */
+		if (reg & (1 << m->shift))
+			twl4030->bypass_state |= (1 << 4);
+		else
+			twl4030->bypass_state &= ~(1 << 4);
+	} else if (m->reg == TWL4030_REG_VSTPGA) {
+		/* Voice digital bypass */
+		if (reg)
+			twl4030->bypass_state |= (1 << 5);
+		else
+			twl4030->bypass_state &= ~(1 << 5);
 	} else {
 		/* Digital bypass */
 		if (reg & (0x7 << m->shift))
-			twl4030->bypass_state |= (1 << (m->shift ? 5 : 4));
+			twl4030->bypass_state |= (1 << (m->shift ? 7 : 6));
 		else
-			twl4030->bypass_state &= ~(1 << (m->shift ? 5 : 4));
+			twl4030->bypass_state &= ~(1 << (m->shift ? 7 : 6));
 	}
 
+	/* Enable master analog loopback mode if any analog switch is enabled*/
+	misc = twl4030_read_reg_cache(w->codec, TWL4030_REG_MISC_SET_1);
+	if (twl4030->bypass_state & 0x1F)
+		misc |= TWL4030_FMLOOP_EN;
+	else
+		misc &= ~TWL4030_FMLOOP_EN;
+	twl4030_write(w->codec, TWL4030_REG_MISC_SET_1, misc);
+
 	if (w->codec->bias_level == SND_SOC_BIAS_STANDBY) {
 		if (twl4030->bypass_state)
 			twl4030_codec_mute(w->codec, 0);
@@ -810,6 +914,48 @@
 	return err;
 }
 
+/* Codec operation modes */
+static const char *twl4030_op_modes_texts[] = {
+	"Option 2 (voice/audio)", "Option 1 (audio)"
+};
+
+static const struct soc_enum twl4030_op_modes_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_CODEC_MODE, 0,
+			ARRAY_SIZE(twl4030_op_modes_texts),
+			twl4030_op_modes_texts);
+
+int snd_soc_put_twl4030_opmode_enum_double(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct twl4030_priv *twl4030 = codec->private_data;
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
+	unsigned short val;
+	unsigned short mask, bitmask;
+
+	if (twl4030->configured) {
+		printk(KERN_ERR "twl4030 operation mode cannot be "
+			"changed on-the-fly\n");
+		return -EBUSY;
+	}
+
+	for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
+		;
+	if (ucontrol->value.enumerated.item[0] > e->max - 1)
+		return -EINVAL;
+
+	val = ucontrol->value.enumerated.item[0] << e->shift_l;
+	mask = (bitmask - 1) << e->shift_l;
+	if (e->shift_l != e->shift_r) {
+		if (ucontrol->value.enumerated.item[1] > e->max - 1)
+			return -EINVAL;
+		val |= ucontrol->value.enumerated.item[1] << e->shift_r;
+		mask |= (bitmask - 1) << e->shift_r;
+	}
+
+	return snd_soc_update_bits(codec, e->reg, mask, val);
+}
+
 /*
  * FGAIN volume control:
  * from -62 to 0 dB in 1 dB steps (mute instead of -63 dB)
@@ -824,6 +970,12 @@
 static DECLARE_TLV_DB_SCALE(digital_coarse_tlv, 0, 600, 0);
 
 /*
+ * Voice Downlink GAIN volume control:
+ * from -37 to 12 dB in 1 dB steps (mute instead of -37 dB)
+ */
+static DECLARE_TLV_DB_SCALE(digital_voice_downlink_tlv, -3700, 100, 1);
+
+/*
  * Analog playback gain
  * -24 dB to 12 dB in 2 dB steps
  */
@@ -864,7 +1016,32 @@
 			ARRAY_SIZE(twl4030_rampdelay_texts),
 			twl4030_rampdelay_texts);
 
+/* Vibra H-bridge direction mode */
+static const char *twl4030_vibradirmode_texts[] = {
+	"Vibra H-bridge direction", "Audio data MSB",
+};
+
+static const struct soc_enum twl4030_vibradirmode_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 5,
+			ARRAY_SIZE(twl4030_vibradirmode_texts),
+			twl4030_vibradirmode_texts);
+
+/* Vibra H-bridge direction */
+static const char *twl4030_vibradir_texts[] = {
+	"Positive polarity", "Negative polarity",
+};
+
+static const struct soc_enum twl4030_vibradir_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 1,
+			ARRAY_SIZE(twl4030_vibradir_texts),
+			twl4030_vibradir_texts);
+
 static const struct snd_kcontrol_new twl4030_snd_controls[] = {
+	/* Codec operation mode control */
+	SOC_ENUM_EXT("Codec Operation Mode", twl4030_op_modes_enum,
+		snd_soc_get_enum_double,
+		snd_soc_put_twl4030_opmode_enum_double),
+
 	/* Common playback gain controls */
 	SOC_DOUBLE_R_TLV("DAC1 Digital Fine Playback Volume",
 		TWL4030_REG_ARXL1PGA, TWL4030_REG_ARXR1PGA,
@@ -893,6 +1070,16 @@
 		TWL4030_REG_ARXL2_APGA_CTL, TWL4030_REG_ARXR2_APGA_CTL,
 		1, 1, 0),
 
+	/* Common voice downlink gain controls */
+	SOC_SINGLE_TLV("DAC Voice Digital Downlink Volume",
+		TWL4030_REG_VRXPGA, 0, 0x31, 0, digital_voice_downlink_tlv),
+
+	SOC_SINGLE_TLV("DAC Voice Analog Downlink Volume",
+		TWL4030_REG_VDL_APGA_CTL, 3, 0x12, 1, analog_tlv),
+
+	SOC_SINGLE("DAC Voice Analog Downlink Switch",
+		TWL4030_REG_VDL_APGA_CTL, 1, 1, 0),
+
 	/* Separate output gain controls */
 	SOC_DOUBLE_R_TLV_TWL4030("PreDriv Playback Volume",
 		TWL4030_REG_PREDL_CTL, TWL4030_REG_PREDR_CTL,
@@ -920,6 +1107,9 @@
 		0, 3, 5, 0, input_gain_tlv),
 
 	SOC_ENUM("HS ramp delay", twl4030_rampdelay_enum),
+
+	SOC_ENUM("Vibra H-bridge mode", twl4030_vibradirmode_enum),
+	SOC_ENUM("Vibra H-bridge direction", twl4030_vibradir_enum),
 };
 
 static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
@@ -947,26 +1137,19 @@
 	SND_SOC_DAPM_OUTPUT("CARKITR"),
 	SND_SOC_DAPM_OUTPUT("HFL"),
 	SND_SOC_DAPM_OUTPUT("HFR"),
+	SND_SOC_DAPM_OUTPUT("VIBRA"),
 
 	/* DACs */
-	SND_SOC_DAPM_DAC("DAC Right1", "Right Front Playback",
+	SND_SOC_DAPM_DAC("DAC Right1", "Right Front HiFi Playback",
 			SND_SOC_NOPM, 0, 0),
-	SND_SOC_DAPM_DAC("DAC Left1", "Left Front Playback",
+	SND_SOC_DAPM_DAC("DAC Left1", "Left Front HiFi Playback",
 			SND_SOC_NOPM, 0, 0),
-	SND_SOC_DAPM_DAC("DAC Right2", "Right Rear Playback",
+	SND_SOC_DAPM_DAC("DAC Right2", "Right Rear HiFi Playback",
 			SND_SOC_NOPM, 0, 0),
-	SND_SOC_DAPM_DAC("DAC Left2", "Left Rear Playback",
+	SND_SOC_DAPM_DAC("DAC Left2", "Left Rear HiFi Playback",
 			SND_SOC_NOPM, 0, 0),
-
-	/* Analog PGAs */
-	SND_SOC_DAPM_PGA("ARXR1_APGA", TWL4030_REG_ARXR1_APGA_CTL,
-			0, 0, NULL, 0),
-	SND_SOC_DAPM_PGA("ARXL1_APGA", TWL4030_REG_ARXL1_APGA_CTL,
-			0, 0, NULL, 0),
-	SND_SOC_DAPM_PGA("ARXR2_APGA", TWL4030_REG_ARXR2_APGA_CTL,
-			0, 0, NULL, 0),
-	SND_SOC_DAPM_PGA("ARXL2_APGA", TWL4030_REG_ARXL2_APGA_CTL,
-			0, 0, NULL, 0),
+	SND_SOC_DAPM_DAC("DAC Voice", "Voice Playback",
+			SND_SOC_NOPM, 0, 0),
 
 	/* Analog bypasses */
 	SND_SOC_DAPM_SWITCH_E("Right1 Analog Loopback", SND_SOC_NOPM, 0, 0,
@@ -981,6 +1164,9 @@
 	SND_SOC_DAPM_SWITCH_E("Left2 Analog Loopback", SND_SOC_NOPM, 0, 0,
 			&twl4030_dapm_abypassl2_control,
 			bypass_event, SND_SOC_DAPM_POST_REG),
+	SND_SOC_DAPM_SWITCH_E("Voice Analog Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_abypassv_control,
+			bypass_event, SND_SOC_DAPM_POST_REG),
 
 	/* Digital bypasses */
 	SND_SOC_DAPM_SWITCH_E("Left Digital Loopback", SND_SOC_NOPM, 0, 0,
@@ -989,43 +1175,88 @@
 	SND_SOC_DAPM_SWITCH_E("Right Digital Loopback", SND_SOC_NOPM, 0, 0,
 			&twl4030_dapm_dbypassr_control, bypass_event,
 			SND_SOC_DAPM_POST_REG),
+	SND_SOC_DAPM_SWITCH_E("Voice Digital Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_dbypassv_control, bypass_event,
+			SND_SOC_DAPM_POST_REG),
 
-	SND_SOC_DAPM_MIXER("Analog R1 Playback Mixer", TWL4030_REG_AVDAC_CTL,
-			0, 0, NULL, 0),
-	SND_SOC_DAPM_MIXER("Analog L1 Playback Mixer", TWL4030_REG_AVDAC_CTL,
-			1, 0, NULL, 0),
-	SND_SOC_DAPM_MIXER("Analog R2 Playback Mixer", TWL4030_REG_AVDAC_CTL,
-			2, 0, NULL, 0),
-	SND_SOC_DAPM_MIXER("Analog L2 Playback Mixer", TWL4030_REG_AVDAC_CTL,
-			3, 0, NULL, 0),
+	/* Digital mixers, power control for the physical DACs */
+	SND_SOC_DAPM_MIXER("Digital R1 Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Digital L1 Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 1, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Digital R2 Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 2, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Digital L2 Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 3, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Digital Voice Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 4, 0, NULL, 0),
+
+	/* Analog mixers, power control for the physical PGAs */
+	SND_SOC_DAPM_MIXER("Analog R1 Playback Mixer",
+			TWL4030_REG_ARXR1_APGA_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Analog L1 Playback Mixer",
+			TWL4030_REG_ARXL1_APGA_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Analog R2 Playback Mixer",
+			TWL4030_REG_ARXR2_APGA_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Analog L2 Playback Mixer",
+			TWL4030_REG_ARXL2_APGA_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Analog Voice Playback Mixer",
+			TWL4030_REG_VDL_APGA_CTL, 0, 0, NULL, 0),
+
+	/* Output MIXER controls */
+	/* Earpiece */
+	SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_earpiece_controls[0],
+			ARRAY_SIZE(twl4030_dapm_earpiece_controls)),
+	/* PreDrivL/R */
+	SND_SOC_DAPM_MIXER("PredriveL Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_predrivel_controls[0],
+			ARRAY_SIZE(twl4030_dapm_predrivel_controls)),
+	SND_SOC_DAPM_MIXER("PredriveR Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_predriver_controls[0],
+			ARRAY_SIZE(twl4030_dapm_predriver_controls)),
+	/* HeadsetL/R */
+	SND_SOC_DAPM_MIXER("HeadsetL Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_hsol_controls[0],
+			ARRAY_SIZE(twl4030_dapm_hsol_controls)),
+	SND_SOC_DAPM_PGA_E("HeadsetL PGA", SND_SOC_NOPM,
+			0, 0, NULL, 0, headsetlpga_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_MIXER("HeadsetR Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_hsor_controls[0],
+			ARRAY_SIZE(twl4030_dapm_hsor_controls)),
+	SND_SOC_DAPM_PGA_E("HeadsetR PGA", SND_SOC_NOPM,
+			0, 0, NULL, 0, headsetrpga_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	/* CarkitL/R */
+	SND_SOC_DAPM_MIXER("CarkitL Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_carkitl_controls[0],
+			ARRAY_SIZE(twl4030_dapm_carkitl_controls)),
+	SND_SOC_DAPM_MIXER("CarkitR Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_carkitr_controls[0],
+			ARRAY_SIZE(twl4030_dapm_carkitr_controls)),
 
 	/* Output MUX controls */
-	/* Earpiece */
-	SND_SOC_DAPM_VALUE_MUX("Earpiece Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_earpiece_control),
-	/* PreDrivL/R */
-	SND_SOC_DAPM_VALUE_MUX("PredriveL Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_predrivel_control),
-	SND_SOC_DAPM_VALUE_MUX("PredriveR Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_predriver_control),
-	/* HeadsetL/R */
-	SND_SOC_DAPM_MUX_E("HeadsetL Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_hsol_control, headsetl_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
-	SND_SOC_DAPM_MUX("HeadsetR Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_hsor_control),
-	/* CarkitL/R */
-	SND_SOC_DAPM_MUX("CarkitL Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_carkitl_control),
-	SND_SOC_DAPM_MUX("CarkitR Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_carkitr_control),
 	/* HandsfreeL/R */
-	SND_SOC_DAPM_MUX_E("HandsfreeL Mux", TWL4030_REG_HFL_CTL, 5, 0,
-		&twl4030_dapm_handsfreel_control, handsfree_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
-	SND_SOC_DAPM_MUX_E("HandsfreeR Mux", TWL4030_REG_HFR_CTL, 5, 0,
-		&twl4030_dapm_handsfreer_control, handsfree_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_MUX("HandsfreeL Mux", SND_SOC_NOPM, 0, 0,
+		&twl4030_dapm_handsfreel_control),
+	SND_SOC_DAPM_SWITCH("HandsfreeL Switch", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_handsfreelmute_control),
+	SND_SOC_DAPM_PGA_E("HandsfreeL PGA", SND_SOC_NOPM,
+			0, 0, NULL, 0, handsfreelpga_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_MUX("HandsfreeR Mux", SND_SOC_NOPM, 5, 0,
+		&twl4030_dapm_handsfreer_control),
+	SND_SOC_DAPM_SWITCH("HandsfreeR Switch", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_handsfreermute_control),
+	SND_SOC_DAPM_PGA_E("HandsfreeR PGA", SND_SOC_NOPM,
+			0, 0, NULL, 0, handsfreerpga_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	/* Vibra */
+	SND_SOC_DAPM_MUX("Vibra Mux", TWL4030_REG_VIBRA_CTL, 0, 0,
+		&twl4030_dapm_vibra_control),
+	SND_SOC_DAPM_MUX("Vibra Route", SND_SOC_NOPM, 0, 0,
+		&twl4030_dapm_vibrapath_control),
 
 	/* Introducing four virtual ADC, since TWL4030 have four channel for
 	   capture */
@@ -1050,11 +1281,15 @@
 		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD|
 		SND_SOC_DAPM_POST_REG),
 
-	/* Analog input muxes with switch for the capture amplifiers */
-	SND_SOC_DAPM_VALUE_MUX("Analog Left Capture Route",
-		TWL4030_REG_ANAMICL, 4, 0, &twl4030_dapm_analoglmic_control),
-	SND_SOC_DAPM_VALUE_MUX("Analog Right Capture Route",
-		TWL4030_REG_ANAMICR, 4, 0, &twl4030_dapm_analogrmic_control),
+	/* Analog input mixers for the capture amplifiers */
+	SND_SOC_DAPM_MIXER("Analog Left Capture Route",
+		TWL4030_REG_ANAMICL, 4, 0,
+		&twl4030_dapm_analoglmic_controls[0],
+		ARRAY_SIZE(twl4030_dapm_analoglmic_controls)),
+	SND_SOC_DAPM_MIXER("Analog Right Capture Route",
+		TWL4030_REG_ANAMICR, 4, 0,
+		&twl4030_dapm_analogrmic_controls[0],
+		ARRAY_SIZE(twl4030_dapm_analogrmic_controls)),
 
 	SND_SOC_DAPM_PGA("ADC Physical Left",
 		TWL4030_REG_AVADC_CTL, 3, 0, NULL, 0),
@@ -1073,62 +1308,86 @@
 };
 
 static const struct snd_soc_dapm_route intercon[] = {
-	{"Analog L1 Playback Mixer", NULL, "DAC Left1"},
-	{"Analog R1 Playback Mixer", NULL, "DAC Right1"},
-	{"Analog L2 Playback Mixer", NULL, "DAC Left2"},
-	{"Analog R2 Playback Mixer", NULL, "DAC Right2"},
+	{"Digital L1 Playback Mixer", NULL, "DAC Left1"},
+	{"Digital R1 Playback Mixer", NULL, "DAC Right1"},
+	{"Digital L2 Playback Mixer", NULL, "DAC Left2"},
+	{"Digital R2 Playback Mixer", NULL, "DAC Right2"},
+	{"Digital Voice Playback Mixer", NULL, "DAC Voice"},
 
-	{"ARXL1_APGA", NULL, "Analog L1 Playback Mixer"},
-	{"ARXR1_APGA", NULL, "Analog R1 Playback Mixer"},
-	{"ARXL2_APGA", NULL, "Analog L2 Playback Mixer"},
-	{"ARXR2_APGA", NULL, "Analog R2 Playback Mixer"},
+	{"Analog L1 Playback Mixer", NULL, "Digital L1 Playback Mixer"},
+	{"Analog R1 Playback Mixer", NULL, "Digital R1 Playback Mixer"},
+	{"Analog L2 Playback Mixer", NULL, "Digital L2 Playback Mixer"},
+	{"Analog R2 Playback Mixer", NULL, "Digital R2 Playback Mixer"},
+	{"Analog Voice Playback Mixer", NULL, "Digital Voice Playback Mixer"},
 
 	/* Internal playback routings */
 	/* Earpiece */
-	{"Earpiece Mux", "DACL1", "ARXL1_APGA"},
-	{"Earpiece Mux", "DACL2", "ARXL2_APGA"},
-	{"Earpiece Mux", "DACR1", "ARXR1_APGA"},
+	{"Earpiece Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"Earpiece Mixer", "AudioL1", "Analog L1 Playback Mixer"},
+	{"Earpiece Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+	{"Earpiece Mixer", "AudioR1", "Analog R1 Playback Mixer"},
 	/* PreDrivL */
-	{"PredriveL Mux", "DACL1", "ARXL1_APGA"},
-	{"PredriveL Mux", "DACL2", "ARXL2_APGA"},
-	{"PredriveL Mux", "DACR2", "ARXR2_APGA"},
+	{"PredriveL Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"PredriveL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
+	{"PredriveL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+	{"PredriveL Mixer", "AudioR2", "Analog R2 Playback Mixer"},
 	/* PreDrivR */
-	{"PredriveR Mux", "DACR1", "ARXR1_APGA"},
-	{"PredriveR Mux", "DACR2", "ARXR2_APGA"},
-	{"PredriveR Mux", "DACL2", "ARXL2_APGA"},
+	{"PredriveR Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"PredriveR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
+	{"PredriveR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
+	{"PredriveR Mixer", "AudioL2", "Analog L2 Playback Mixer"},
 	/* HeadsetL */
-	{"HeadsetL Mux", "DACL1", "ARXL1_APGA"},
-	{"HeadsetL Mux", "DACL2", "ARXL2_APGA"},
+	{"HeadsetL Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"HeadsetL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
+	{"HeadsetL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+	{"HeadsetL PGA", NULL, "HeadsetL Mixer"},
 	/* HeadsetR */
-	{"HeadsetR Mux", "DACR1", "ARXR1_APGA"},
-	{"HeadsetR Mux", "DACR2", "ARXR2_APGA"},
+	{"HeadsetR Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"HeadsetR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
+	{"HeadsetR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
+	{"HeadsetR PGA", NULL, "HeadsetR Mixer"},
 	/* CarkitL */
-	{"CarkitL Mux", "DACL1", "ARXL1_APGA"},
-	{"CarkitL Mux", "DACL2", "ARXL2_APGA"},
+	{"CarkitL Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"CarkitL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
+	{"CarkitL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
 	/* CarkitR */
-	{"CarkitR Mux", "DACR1", "ARXR1_APGA"},
-	{"CarkitR Mux", "DACR2", "ARXR2_APGA"},
+	{"CarkitR Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"CarkitR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
+	{"CarkitR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
 	/* HandsfreeL */
-	{"HandsfreeL Mux", "DACL1", "ARXL1_APGA"},
-	{"HandsfreeL Mux", "DACL2", "ARXL2_APGA"},
-	{"HandsfreeL Mux", "DACR2", "ARXR2_APGA"},
+	{"HandsfreeL Mux", "Voice", "Analog Voice Playback Mixer"},
+	{"HandsfreeL Mux", "AudioL1", "Analog L1 Playback Mixer"},
+	{"HandsfreeL Mux", "AudioL2", "Analog L2 Playback Mixer"},
+	{"HandsfreeL Mux", "AudioR2", "Analog R2 Playback Mixer"},
+	{"HandsfreeL Switch", "Switch", "HandsfreeL Mux"},
+	{"HandsfreeL PGA", NULL, "HandsfreeL Switch"},
 	/* HandsfreeR */
-	{"HandsfreeR Mux", "DACR1", "ARXR1_APGA"},
-	{"HandsfreeR Mux", "DACR2", "ARXR2_APGA"},
-	{"HandsfreeR Mux", "DACL2", "ARXL2_APGA"},
+	{"HandsfreeR Mux", "Voice", "Analog Voice Playback Mixer"},
+	{"HandsfreeR Mux", "AudioR1", "Analog R1 Playback Mixer"},
+	{"HandsfreeR Mux", "AudioR2", "Analog R2 Playback Mixer"},
+	{"HandsfreeR Mux", "AudioL2", "Analog L2 Playback Mixer"},
+	{"HandsfreeR Switch", "Switch", "HandsfreeR Mux"},
+	{"HandsfreeR PGA", NULL, "HandsfreeR Switch"},
+	/* Vibra */
+	{"Vibra Mux", "AudioL1", "DAC Left1"},
+	{"Vibra Mux", "AudioR1", "DAC Right1"},
+	{"Vibra Mux", "AudioL2", "DAC Left2"},
+	{"Vibra Mux", "AudioR2", "DAC Right2"},
 
 	/* outputs */
-	{"OUTL", NULL, "ARXL2_APGA"},
-	{"OUTR", NULL, "ARXR2_APGA"},
-	{"EARPIECE", NULL, "Earpiece Mux"},
-	{"PREDRIVEL", NULL, "PredriveL Mux"},
-	{"PREDRIVER", NULL, "PredriveR Mux"},
-	{"HSOL", NULL, "HeadsetL Mux"},
-	{"HSOR", NULL, "HeadsetR Mux"},
-	{"CARKITL", NULL, "CarkitL Mux"},
-	{"CARKITR", NULL, "CarkitR Mux"},
-	{"HFL", NULL, "HandsfreeL Mux"},
-	{"HFR", NULL, "HandsfreeR Mux"},
+	{"OUTL", NULL, "Analog L2 Playback Mixer"},
+	{"OUTR", NULL, "Analog R2 Playback Mixer"},
+	{"EARPIECE", NULL, "Earpiece Mixer"},
+	{"PREDRIVEL", NULL, "PredriveL Mixer"},
+	{"PREDRIVER", NULL, "PredriveR Mixer"},
+	{"HSOL", NULL, "HeadsetL PGA"},
+	{"HSOR", NULL, "HeadsetR PGA"},
+	{"CARKITL", NULL, "CarkitL Mixer"},
+	{"CARKITR", NULL, "CarkitR Mixer"},
+	{"HFL", NULL, "HandsfreeL PGA"},
+	{"HFR", NULL, "HandsfreeR PGA"},
+	{"Vibra Route", "Audio", "Vibra Mux"},
+	{"VIBRA", NULL, "Vibra Route"},
 
 	/* Capture path */
 	{"Analog Left Capture Route", "Main mic", "MAINMIC"},
@@ -1168,18 +1427,22 @@
 	{"Left1 Analog Loopback", "Switch", "Analog Left Capture Route"},
 	{"Right2 Analog Loopback", "Switch", "Analog Right Capture Route"},
 	{"Left2 Analog Loopback", "Switch", "Analog Left Capture Route"},
+	{"Voice Analog Loopback", "Switch", "Analog Left Capture Route"},
 
 	{"Analog R1 Playback Mixer", NULL, "Right1 Analog Loopback"},
 	{"Analog L1 Playback Mixer", NULL, "Left1 Analog Loopback"},
 	{"Analog R2 Playback Mixer", NULL, "Right2 Analog Loopback"},
 	{"Analog L2 Playback Mixer", NULL, "Left2 Analog Loopback"},
+	{"Analog Voice Playback Mixer", NULL, "Voice Analog Loopback"},
 
 	/* Digital bypass routes */
 	{"Right Digital Loopback", "Volume", "TX1 Capture Route"},
 	{"Left Digital Loopback", "Volume", "TX1 Capture Route"},
+	{"Voice Digital Loopback", "Volume", "TX2 Capture Route"},
 
-	{"Analog R2 Playback Mixer", NULL, "Right Digital Loopback"},
-	{"Analog L2 Playback Mixer", NULL, "Left Digital Loopback"},
+	{"Digital R2 Playback Mixer", NULL, "Right Digital Loopback"},
+	{"Digital L2 Playback Mixer", NULL, "Left Digital Loopback"},
+	{"Digital Voice Playback Mixer", NULL, "Voice Digital Loopback"},
 
 };
 
@@ -1226,6 +1489,58 @@
 	return 0;
 }
 
+static void twl4030_constraints(struct twl4030_priv *twl4030,
+				struct snd_pcm_substream *mst_substream)
+{
+	struct snd_pcm_substream *slv_substream;
+
+	/* Pick the stream, which need to be constrained */
+	if (mst_substream == twl4030->master_substream)
+		slv_substream = twl4030->slave_substream;
+	else if (mst_substream == twl4030->slave_substream)
+		slv_substream = twl4030->master_substream;
+	else /* This should not happen.. */
+		return;
+
+	/* Set the constraints according to the already configured stream */
+	snd_pcm_hw_constraint_minmax(slv_substream->runtime,
+				SNDRV_PCM_HW_PARAM_RATE,
+				twl4030->rate,
+				twl4030->rate);
+
+	snd_pcm_hw_constraint_minmax(slv_substream->runtime,
+				SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+				twl4030->sample_bits,
+				twl4030->sample_bits);
+
+	snd_pcm_hw_constraint_minmax(slv_substream->runtime,
+				SNDRV_PCM_HW_PARAM_CHANNELS,
+				twl4030->channels,
+				twl4030->channels);
+}
+
+/* In case of 4 channel mode, the RX1 L/R for playback and the TX2 L/R for
+ * capture has to be enabled/disabled. */
+static void twl4030_tdm_enable(struct snd_soc_codec *codec, int direction,
+				int enable)
+{
+	u8 reg, mask;
+
+	reg = twl4030_read_reg_cache(codec, TWL4030_REG_OPTION);
+
+	if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+		mask = TWL4030_ARXL1_VRX_EN | TWL4030_ARXR1_EN;
+	else
+		mask = TWL4030_ATXL2_VTXL_EN | TWL4030_ATXR2_VTXR_EN;
+
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	twl4030_write(codec, TWL4030_REG_OPTION, reg);
+}
+
 static int twl4030_startup(struct snd_pcm_substream *substream,
 			   struct snd_soc_dai *dai)
 {
@@ -1234,26 +1549,25 @@
 	struct snd_soc_codec *codec = socdev->card->codec;
 	struct twl4030_priv *twl4030 = codec->private_data;
 
-	/* If we already have a playback or capture going then constrain
-	 * this substream to match it.
-	 */
 	if (twl4030->master_substream) {
-		struct snd_pcm_runtime *master_runtime;
-		master_runtime = twl4030->master_substream->runtime;
-
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_RATE,
-					     master_runtime->rate,
-					     master_runtime->rate);
-
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
-					     master_runtime->sample_bits,
-					     master_runtime->sample_bits);
-
 		twl4030->slave_substream = substream;
-	} else
+		/* The DAI has one configuration for playback and capture, so
+		 * if the DAI has been already configured then constrain this
+		 * substream to match it. */
+		if (twl4030->configured)
+			twl4030_constraints(twl4030, twl4030->master_substream);
+	} else {
+		if (!(twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE) &
+			TWL4030_OPTION_1)) {
+			/* In option2 4 channel is not supported, set the
+			 * constraint for the first stream for channels, the
+			 * second stream will 'inherit' this cosntraint */
+			snd_pcm_hw_constraint_minmax(substream->runtime,
+						SNDRV_PCM_HW_PARAM_CHANNELS,
+						2, 2);
+		}
 		twl4030->master_substream = substream;
+	}
 
 	return 0;
 }
@@ -1270,6 +1584,17 @@
 		twl4030->master_substream = twl4030->slave_substream;
 
 	twl4030->slave_substream = NULL;
+
+	/* If all streams are closed, or the remaining stream has not yet
+	 * been configured than set the DAI as not configured. */
+	if (!twl4030->master_substream)
+		twl4030->configured = 0;
+	 else if (!twl4030->master_substream->runtime->channels)
+		twl4030->configured = 0;
+
+	 /* If the closing substream had 4 channel, do the necessary cleanup */
+	if (substream->runtime->channels == 4)
+		twl4030_tdm_enable(codec, substream->stream, 0);
 }
 
 static int twl4030_hw_params(struct snd_pcm_substream *substream,
@@ -1282,8 +1607,24 @@
 	struct twl4030_priv *twl4030 = codec->private_data;
 	u8 mode, old_mode, format, old_format;
 
-	if (substream == twl4030->slave_substream)
-		/* Ignoring hw_params for slave substream */
+	 /* If the substream has 4 channel, do the necessary setup */
+	if (params_channels(params) == 4) {
+		u8 format, mode;
+
+		format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF);
+		mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE);
+
+		/* Safety check: are we in the correct operating mode and
+		 * the interface is in TDM mode? */
+		if ((mode & TWL4030_OPTION_1) &&
+		    ((format & TWL4030_AIF_FORMAT) == TWL4030_AIF_FORMAT_TDM))
+			twl4030_tdm_enable(codec, substream->stream, 1);
+		else
+			return -EINVAL;
+	}
+
+	if (twl4030->configured)
+		/* Ignoring hw_params for already configured DAI */
 		return 0;
 
 	/* bit rate */
@@ -1363,6 +1704,21 @@
 		/* set CODECPDZ afterwards */
 		twl4030_codec_enable(codec, 1);
 	}
+
+	/* Store the important parameters for the DAI configuration and set
+	 * the DAI as configured */
+	twl4030->configured = 1;
+	twl4030->rate = params_rate(params);
+	twl4030->sample_bits = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_SAMPLE_BITS)->min;
+	twl4030->channels = params_channels(params);
+
+	/* If both playback and capture streams are open, and one of them
+	 * is setting the hw parameters right now (since we are here), set
+	 * constraints to the other stream to match the current one. */
+	if (twl4030->slave_substream)
+		twl4030_constraints(twl4030, substream);
+
 	return 0;
 }
 
@@ -1370,17 +1726,21 @@
 		int clk_id, unsigned int freq, int dir)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
+	struct twl4030_priv *twl4030 = codec->private_data;
 	u8 infreq;
 
 	switch (freq) {
 	case 19200000:
 		infreq = TWL4030_APLL_INFREQ_19200KHZ;
+		twl4030->sysclk = 19200;
 		break;
 	case 26000000:
 		infreq = TWL4030_APLL_INFREQ_26000KHZ;
+		twl4030->sysclk = 26000;
 		break;
 	case 38400000:
 		infreq = TWL4030_APLL_INFREQ_38400KHZ;
+		twl4030->sysclk = 38400;
 		break;
 	default:
 		printk(KERN_ERR "TWL4030 set sysclk: unknown rate %d\n",
@@ -1424,6 +1784,9 @@
 	case SND_SOC_DAIFMT_I2S:
 		format |= TWL4030_AIF_FORMAT_CODEC;
 		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		format |= TWL4030_AIF_FORMAT_TDM;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -1443,6 +1806,180 @@
 	return 0;
 }
 
+/* In case of voice mode, the RX1 L(VRX) for downlink and the TX2 L/R
+ * (VTXL, VTXR) for uplink has to be enabled/disabled. */
+static void twl4030_voice_enable(struct snd_soc_codec *codec, int direction,
+				int enable)
+{
+	u8 reg, mask;
+
+	reg = twl4030_read_reg_cache(codec, TWL4030_REG_OPTION);
+
+	if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+		mask = TWL4030_ARXL1_VRX_EN;
+	else
+		mask = TWL4030_ATXL2_VTXL_EN | TWL4030_ATXR2_VTXR_EN;
+
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	twl4030_write(codec, TWL4030_REG_OPTION, reg);
+}
+
+static int twl4030_voice_startup(struct snd_pcm_substream *substream,
+		struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u8 infreq;
+	u8 mode;
+
+	/* If the system master clock is not 26MHz, the voice PCM interface is
+	 * not avilable.
+	 */
+	infreq = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL)
+		& TWL4030_APLL_INFREQ;
+
+	if (infreq != TWL4030_APLL_INFREQ_26000KHZ) {
+		printk(KERN_ERR "TWL4030 voice startup: "
+			"MCLK is not 26MHz, call set_sysclk() on init\n");
+		return -EINVAL;
+	}
+
+	/* If the codec mode is not option2, the voice PCM interface is not
+	 * avilable.
+	 */
+	mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE)
+		& TWL4030_OPT_MODE;
+
+	if (mode != TWL4030_OPTION_2) {
+		printk(KERN_ERR "TWL4030 voice startup: "
+			"the codec mode is not option2\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void twl4030_voice_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	/* Enable voice digital filters */
+	twl4030_voice_enable(codec, substream->stream, 0);
+}
+
+static int twl4030_voice_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u8 old_mode, mode;
+
+	/* Enable voice digital filters */
+	twl4030_voice_enable(codec, substream->stream, 1);
+
+	/* bit rate */
+	old_mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE)
+		& ~(TWL4030_CODECPDZ);
+	mode = old_mode;
+
+	switch (params_rate(params)) {
+	case 8000:
+		mode &= ~(TWL4030_SEL_16K);
+		break;
+	case 16000:
+		mode |= TWL4030_SEL_16K;
+		break;
+	default:
+		printk(KERN_ERR "TWL4030 voice hw params: unknown rate %d\n",
+			params_rate(params));
+		return -EINVAL;
+	}
+
+	if (mode != old_mode) {
+		/* change rate and set CODECPDZ */
+		twl4030_codec_enable(codec, 0);
+		twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode);
+		twl4030_codec_enable(codec, 1);
+	}
+
+	return 0;
+}
+
+static int twl4030_voice_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u8 infreq;
+
+	switch (freq) {
+	case 26000000:
+		infreq = TWL4030_APLL_INFREQ_26000KHZ;
+		break;
+	default:
+		printk(KERN_ERR "TWL4030 voice set sysclk: unknown rate %d\n",
+			freq);
+		return -EINVAL;
+	}
+
+	infreq |= TWL4030_APLL_EN;
+	twl4030_write(codec, TWL4030_REG_APLL_CTL, infreq);
+
+	return 0;
+}
+
+static int twl4030_voice_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u8 old_format, format;
+
+	/* get format */
+	old_format = twl4030_read_reg_cache(codec, TWL4030_REG_VOICE_IF);
+	format = old_format;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFM:
+		format &= ~(TWL4030_VIF_SLAVE_EN);
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		format |= TWL4030_VIF_SLAVE_EN;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_IB_NF:
+		format &= ~(TWL4030_VIF_FORMAT);
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		format |= TWL4030_VIF_FORMAT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (format != old_format) {
+		/* change format and set CODECPDZ */
+		twl4030_codec_enable(codec, 0);
+		twl4030_write(codec, TWL4030_REG_VOICE_IF, format);
+		twl4030_codec_enable(codec, 1);
+	}
+
+	return 0;
+}
+
 #define TWL4030_RATES	 (SNDRV_PCM_RATE_8000_48000)
 #define TWL4030_FORMATS	 (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_S24_LE)
 
@@ -1454,21 +1991,47 @@
 	.set_fmt	= twl4030_set_dai_fmt,
 };
 
-struct snd_soc_dai twl4030_dai = {
+static struct snd_soc_dai_ops twl4030_dai_voice_ops = {
+	.startup	= twl4030_voice_startup,
+	.shutdown	= twl4030_voice_shutdown,
+	.hw_params	= twl4030_voice_hw_params,
+	.set_sysclk	= twl4030_voice_set_dai_sysclk,
+	.set_fmt	= twl4030_voice_set_dai_fmt,
+};
+
+struct snd_soc_dai twl4030_dai[] = {
+{
 	.name = "twl4030",
 	.playback = {
-		.stream_name = "Playback",
+		.stream_name = "HiFi Playback",
 		.channels_min = 2,
-		.channels_max = 2,
+		.channels_max = 4,
 		.rates = TWL4030_RATES | SNDRV_PCM_RATE_96000,
 		.formats = TWL4030_FORMATS,},
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 2,
-		.channels_max = 2,
+		.channels_max = 4,
 		.rates = TWL4030_RATES,
 		.formats = TWL4030_FORMATS,},
 	.ops = &twl4030_dai_ops,
+},
+{
+	.name = "twl4030 Voice",
+	.playback = {
+		.stream_name = "Voice Playback",
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.ops = &twl4030_dai_voice_ops,
+},
 };
 EXPORT_SYMBOL_GPL(twl4030_dai);
 
@@ -1500,6 +2063,8 @@
 static int twl4030_init(struct snd_soc_device *socdev)
 {
 	struct snd_soc_codec *codec = socdev->card->codec;
+	struct twl4030_setup_data *setup = socdev->codec_data;
+	struct twl4030_priv *twl4030 = codec->private_data;
 	int ret = 0;
 
 	printk(KERN_INFO "TWL4030 Audio Codec init \n");
@@ -1509,14 +2074,31 @@
 	codec->read = twl4030_read_reg_cache;
 	codec->write = twl4030_write;
 	codec->set_bias_level = twl4030_set_bias_level;
-	codec->dai = &twl4030_dai;
-	codec->num_dai = 1;
+	codec->dai = twl4030_dai;
+	codec->num_dai = ARRAY_SIZE(twl4030_dai),
 	codec->reg_cache_size = sizeof(twl4030_reg);
 	codec->reg_cache = kmemdup(twl4030_reg, sizeof(twl4030_reg),
 					GFP_KERNEL);
 	if (codec->reg_cache == NULL)
 		return -ENOMEM;
 
+	/* Configuration for headset ramp delay from setup data */
+	if (setup) {
+		unsigned char hs_pop;
+
+		if (setup->sysclk)
+			twl4030->sysclk = setup->sysclk;
+		else
+			twl4030->sysclk = 26000;
+
+		hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
+		hs_pop &= ~TWL4030_RAMP_DELAY;
+		hs_pop |= (setup->ramp_delay_value << 2);
+		twl4030_write_reg_cache(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+	} else {
+		twl4030->sysclk = 26000;
+	}
+
 	/* register pcms */
 	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
 	if (ret < 0) {
@@ -1604,13 +2186,13 @@
 
 static int __init twl4030_modinit(void)
 {
-	return snd_soc_register_dai(&twl4030_dai);
+	return snd_soc_register_dais(&twl4030_dai[0], ARRAY_SIZE(twl4030_dai));
 }
 module_init(twl4030_modinit);
 
 static void __exit twl4030_exit(void)
 {
-	snd_soc_unregister_dai(&twl4030_dai);
+	snd_soc_unregister_dais(&twl4030_dai[0], ARRAY_SIZE(twl4030_dai));
 }
 module_exit(twl4030_exit);
 
diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h
index cb63765..fe5f395 100644
--- a/sound/soc/codecs/twl4030.h
+++ b/sound/soc/codecs/twl4030.h
@@ -92,8 +92,9 @@
 #define TWL4030_REG_VIBRA_PWM_SET	0x47
 #define TWL4030_REG_ANAMIC_GAIN		0x48
 #define TWL4030_REG_MISC_SET_2		0x49
+#define TWL4030_REG_SW_SHADOW		0x4A
 
-#define TWL4030_CACHEREGNUM	(TWL4030_REG_MISC_SET_2 + 1)
+#define TWL4030_CACHEREGNUM	(TWL4030_REG_SW_SHADOW + 1)
 
 /* Bitfield Definitions */
 
@@ -110,9 +111,22 @@
 #define TWL4030_APLL_RATE_44100		0x90
 #define TWL4030_APLL_RATE_48000		0xA0
 #define TWL4030_APLL_RATE_96000		0xE0
-#define TWL4030_SEL_16K			0x04
+#define TWL4030_SEL_16K			0x08
 #define TWL4030_CODECPDZ		0x02
 #define TWL4030_OPT_MODE		0x01
+#define TWL4030_OPTION_1		(1 << 0)
+#define TWL4030_OPTION_2		(0 << 0)
+
+/* TWL4030_OPTION (0x02) Fields */
+
+#define TWL4030_ATXL1_EN		(1 << 0)
+#define TWL4030_ATXR1_EN		(1 << 1)
+#define TWL4030_ATXL2_VTXL_EN		(1 << 2)
+#define TWL4030_ATXR2_VTXR_EN		(1 << 3)
+#define TWL4030_ARXL1_VRX_EN		(1 << 4)
+#define TWL4030_ARXR1_EN		(1 << 5)
+#define TWL4030_ARXL2_EN		(1 << 6)
+#define TWL4030_ARXR2_EN		(1 << 7)
 
 /* TWL4030_REG_MICBIAS_CTL (0x04) Fields */
 
@@ -171,6 +185,17 @@
 #define TWL4030_CLK256FS_EN		0x02
 #define TWL4030_AIF_EN			0x01
 
+/* VOICE_IF (0x0F) Fields */
+
+#define TWL4030_VIF_SLAVE_EN		0x80
+#define TWL4030_VIF_DIN_EN		0x40
+#define TWL4030_VIF_DOUT_EN		0x20
+#define TWL4030_VIF_SWAP		0x10
+#define TWL4030_VIF_FORMAT		0x08
+#define TWL4030_VIF_TRI_EN		0x04
+#define TWL4030_VIF_SUB_EN		0x02
+#define TWL4030_VIF_EN			0x01
+
 /* EAR_CTL (0x21) */
 #define TWL4030_EAR_GAIN		0x30
 
@@ -236,7 +261,19 @@
 #define TWL4030_SMOOTH_ANAVOL_EN	0x02
 #define TWL4030_DIGMIC_LR_SWAP_EN	0x01
 
-extern struct snd_soc_dai twl4030_dai;
+/* TWL4030_REG_SW_SHADOW (0x4A) Fields */
+#define TWL4030_HFL_EN			0x01
+#define TWL4030_HFR_EN			0x02
+
+#define TWL4030_DAI_HIFI		0
+#define TWL4030_DAI_VOICE		1
+
+extern struct snd_soc_dai twl4030_dai[2];
 extern struct snd_soc_codec_device soc_codec_dev_twl4030;
 
+struct twl4030_setup_data {
+	unsigned int ramp_delay_value;
+	unsigned int sysclk;
+};
+
 #endif	/* End of __TWL4030_AUDIO_H__ */
diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c
index ddefb8f..269b108 100644
--- a/sound/soc/codecs/uda134x.c
+++ b/sound/soc/codecs/uda134x.c
@@ -101,7 +101,7 @@
 	pr_debug("%s reg: %02X, value:%02X\n", __func__, reg, value);
 
 	if (reg >= UDA134X_REGS_NUM) {
-		printk(KERN_ERR "%s unkown register: reg: %d",
+		printk(KERN_ERR "%s unkown register: reg: %u",
 		       __func__, reg);
 		return -EINVAL;
 	}
@@ -296,7 +296,7 @@
 	struct snd_soc_codec *codec = codec_dai->codec;
 	struct uda134x_priv *uda134x = codec->private_data;
 
-	pr_debug("%s clk_id: %d, freq: %d, dir: %d\n", __func__,
+	pr_debug("%s clk_id: %d, freq: %u, dir: %d\n", __func__,
 		 clk_id, freq, dir);
 
 	/* Anything between 256fs*8Khz and 512fs*48Khz should be acceptable
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index 0275321..e7348d3 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -1108,7 +1108,7 @@
 	if (ret < 0)
 		return ret;
 	dev_dbg(wm8350->dev,
-		"FLL in %d FLL out %d N 0x%x K 0x%x div %d ratio %d",
+		"FLL in %u FLL out %u N 0x%x K 0x%x div %d ratio %d",
 		freq_in, freq_out, fll_div.n, fll_div.k, fll_div.div,
 		fll_div.ratio);
 
diff --git a/sound/soc/codecs/wm8350.h b/sound/soc/codecs/wm8350.h
index d11bd92..d088eb4 100644
--- a/sound/soc/codecs/wm8350.h
+++ b/sound/soc/codecs/wm8350.h
@@ -13,6 +13,7 @@
 #define _WM8350_H
 
 #include <sound/soc.h>
+#include <linux/mfd/wm8350/audio.h>
 
 extern struct snd_soc_dai wm8350_dai;
 extern struct snd_soc_codec_device soc_codec_dev_wm8350;
diff --git a/sound/soc/codecs/wm8400.c b/sound/soc/codecs/wm8400.c
index 510efa6..502eefa 100644
--- a/sound/soc/codecs/wm8400.c
+++ b/sound/soc/codecs/wm8400.c
@@ -954,7 +954,7 @@
 		factors->outdiv *= 2;
 		if (factors->outdiv > 32) {
 			dev_err(wm8400->wm8400->dev,
-				"Unsupported FLL output frequency %dHz\n",
+				"Unsupported FLL output frequency %uHz\n",
 				Fout);
 			return -EINVAL;
 		}
@@ -1003,7 +1003,7 @@
 	factors->k = K / 10;
 
 	dev_dbg(wm8400->wm8400->dev,
-		"FLL: Fref=%d Fout=%d N=%x K=%x, FRATIO=%x OUTDIV=%x\n",
+		"FLL: Fref=%u Fout=%u N=%x K=%x, FRATIO=%x OUTDIV=%x\n",
 		Fref, Fout,
 		factors->n, factors->k, factors->fratio, factors->outdiv);
 
@@ -1473,8 +1473,8 @@
 
 	codec = &priv->codec;
 	codec->private_data = priv;
-	codec->control_data = dev->dev.driver_data;
-	priv->wm8400 = dev->dev.driver_data;
+	codec->control_data = dev_get_drvdata(&dev->dev);
+	priv->wm8400 = dev_get_drvdata(&dev->dev);
 
 	ret = regulator_bulk_get(priv->wm8400->dev,
 				 ARRAY_SIZE(power), &power[0]);
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 6a4cea0..c8b8dba 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -298,7 +298,7 @@
 
 	if ((Ndiv < 6) || (Ndiv > 12))
 		printk(KERN_WARNING
-			"WM8510 N value %d outwith recommended range!d\n",
+			"WM8510 N value %u outwith recommended range!d\n",
 			Ndiv);
 
 	pll_div.n = Ndiv;
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index 9f6be3d..86c4b24d 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -415,7 +415,7 @@
 	unsigned int K, Ndiv, Nmod;
 	int i;
 
-	pr_debug("wm8580: PLL %dHz->%dHz\n", source, target);
+	pr_debug("wm8580: PLL %uHz->%uHz\n", source, target);
 
 	/* Scale the output frequency up; the PLL should run in the
 	 * region of 90-100MHz.
@@ -447,7 +447,7 @@
 
 	if ((Ndiv < 5) || (Ndiv > 13)) {
 		printk(KERN_ERR
-			"WM8580 N=%d outside supported range\n", Ndiv);
+			"WM8580 N=%u outside supported range\n", Ndiv);
 		return -EINVAL;
 	}
 
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index e043e3f..7a20587 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -666,14 +666,14 @@
 	codec->hw_write = (hw_write_t)wm8731_spi_write;
 	codec->dev = &spi->dev;
 
-	spi->dev.driver_data = wm8731;
+	dev_set_drvdata(&spi->dev, wm8731);
 
 	return wm8731_register(wm8731);
 }
 
 static int __devexit wm8731_spi_remove(struct spi_device *spi)
 {
-	struct wm8731_priv *wm8731 = spi->dev.driver_data;
+	struct wm8731_priv *wm8731 = dev_get_drvdata(&spi->dev);
 
 	wm8731_unregister(wm8731);
 
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index a6e8f3f..d28eeac 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -703,7 +703,7 @@
 
 	if ((Ndiv < 6) || (Ndiv > 12))
 		printk(KERN_WARNING
-			"wm8753: unsupported N = %d\n", Ndiv);
+			"wm8753: unsupported N = %u\n", Ndiv);
 
 	pll_div->n = Ndiv;
 	Nmod = target % source;
@@ -1822,14 +1822,14 @@
 	codec->hw_write = (hw_write_t)wm8753_spi_write;
 	codec->dev = &spi->dev;
 
-	spi->dev.driver_data = wm8753;
+	dev_set_drvdata(&spi->dev, wm8753);
 
 	return wm8753_register(wm8753);
 }
 
 static int __devexit wm8753_spi_remove(struct spi_device *spi)
 {
-	struct wm8753_priv *wm8753 = spi->dev.driver_data;
+	struct wm8753_priv *wm8753 = dev_get_drvdata(&spi->dev);
 	wm8753_unregister(wm8753);
 	return 0;
 }
diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
index 46c5ea1..3c78945 100644
--- a/sound/soc/codecs/wm8900.c
+++ b/sound/soc/codecs/wm8900.c
@@ -778,11 +778,11 @@
 	}
 
 	if (target > 100000000)
-		printk(KERN_WARNING "wm8900: FLL rate %d out of range, Fref=%d"
-		       " Fout=%d\n", target, Fref, Fout);
+		printk(KERN_WARNING "wm8900: FLL rate %u out of range, Fref=%u"
+		       " Fout=%u\n", target, Fref, Fout);
 	if (div > 32) {
 		printk(KERN_ERR "wm8900: Invalid FLL division rate %u, "
-		       "Fref=%d, Fout=%d, target=%d\n",
+		       "Fref=%u, Fout=%u, target=%u\n",
 		       div, Fref, Fout, target);
 		return -EINVAL;
 	}
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 8cf571f..d8a9222 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -217,7 +217,6 @@
 	int sysclk;
 
 	/* Reference counts */
-	int charge_pump_users;
 	int class_w_users;
 	int playback_active;
 	int capture_active;
@@ -373,6 +372,15 @@
 #define WM8903_OUTPUT_INT   0x2
 #define WM8903_OUTPUT_IN    0x1
 
+static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
+			   struct snd_kcontrol *kcontrol, int event)
+{
+	WARN_ON(event != SND_SOC_DAPM_POST_PMU);
+	mdelay(4);
+
+	return 0;
+}
+
 /*
  * Event for headphone and line out amplifier power changes.  Special
  * power up/down sequences are required in order to maximise pop/click
@@ -382,19 +390,20 @@
 			       struct snd_kcontrol *kcontrol, int event)
 {
 	struct snd_soc_codec *codec = w->codec;
-	struct wm8903_priv *wm8903 = codec->private_data;
-	struct i2c_client *i2c = codec->control_data;
 	u16 val;
 	u16 reg;
+	u16 dcs_reg;
+	u16 dcs_bit;
 	int shift;
-	u16 cp_reg = wm8903_read(codec, WM8903_CHARGE_PUMP_0);
 
 	switch (w->reg) {
 	case WM8903_POWER_MANAGEMENT_2:
 		reg = WM8903_ANALOGUE_HP_0;
+		dcs_bit = 0 + w->shift;
 		break;
 	case WM8903_POWER_MANAGEMENT_3:
 		reg = WM8903_ANALOGUE_LINEOUT_0;
+		dcs_bit = 2 + w->shift;
 		break;
 	default:
 		BUG();
@@ -419,18 +428,6 @@
 		/* Short the output */
 		val &= ~(WM8903_OUTPUT_SHORT << shift);
 		wm8903_write(codec, reg, val);
-
-		wm8903->charge_pump_users++;
-
-		dev_dbg(&i2c->dev, "Charge pump use count now %d\n",
-			wm8903->charge_pump_users);
-
-		if (wm8903->charge_pump_users == 1) {
-			dev_dbg(&i2c->dev, "Enabling charge pump\n");
-			wm8903_write(codec, WM8903_CHARGE_PUMP_0,
-				     cp_reg | WM8903_CP_ENA);
-			mdelay(4);
-		}
 	}
 
 	if (event & SND_SOC_DAPM_POST_PMU) {
@@ -446,6 +443,11 @@
 		val |= (WM8903_OUTPUT_OUT << shift);
 		wm8903_write(codec, reg, val);
 
+		/* Enable the DC servo */
+		dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0);
+		dcs_reg |= dcs_bit;
+		wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg);
+
 		/* Remove the short */
 		val |= (WM8903_OUTPUT_SHORT << shift);
 		wm8903_write(codec, reg, val);
@@ -458,25 +460,17 @@
 		val &= ~(WM8903_OUTPUT_SHORT << shift);
 		wm8903_write(codec, reg, val);
 
+		/* Disable the DC servo */
+		dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0);
+		dcs_reg &= ~dcs_bit;
+		wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg);
+
 		/* Then disable the intermediate and output stages */
 		val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT |
 			  WM8903_OUTPUT_IN) << shift);
 		wm8903_write(codec, reg, val);
 	}
 
-	if (event & SND_SOC_DAPM_POST_PMD) {
-		wm8903->charge_pump_users--;
-
-		dev_dbg(&i2c->dev, "Charge pump use count now %d\n",
-			wm8903->charge_pump_users);
-
-		if (wm8903->charge_pump_users == 0) {
-			dev_dbg(&i2c->dev, "Disabling charge pump\n");
-			wm8903_write(codec, WM8903_CHARGE_PUMP_0,
-				     cp_reg & ~WM8903_CP_ENA);
-		}
-	}
-
 	return 0;
 }
 
@@ -539,6 +533,7 @@
 /* ALSA can only do steps of .01dB */
 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
 
+static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0);
 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
 
 static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0);
@@ -657,6 +652,16 @@
 	SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 4, 3, rinput_mux_text);
 
 
+static const char *sidetone_text[] = {
+	"None", "Left", "Right"
+};
+
+static const struct soc_enum lsidetone_enum =
+	SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 2, 3, sidetone_text);
+
+static const struct soc_enum rsidetone_enum =
+	SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 0, 3, sidetone_text);
+
 static const struct snd_kcontrol_new wm8903_snd_controls[] = {
 
 /* Input PGAs - No TLV since the scale depends on PGA mode */
@@ -700,6 +705,9 @@
 SOC_ENUM("ADC Companding Mode", adc_companding),
 SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0),
 
+SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8,
+	       12, 0, digital_sidetone_tlv),
+
 /* DAC */
 SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT,
 		 WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
@@ -762,6 +770,12 @@
 static const struct snd_kcontrol_new rinput_inv_mux =
 	SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum);
 
+static const struct snd_kcontrol_new lsidetone_mux =
+	SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum);
+
+static const struct snd_kcontrol_new rsidetone_mux =
+	SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum);
+
 static const struct snd_kcontrol_new left_output_mixer[] = {
 SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0),
 SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0),
@@ -828,6 +842,9 @@
 SND_SOC_DAPM_ADC("ADCL", "Left HiFi Capture", WM8903_POWER_MANAGEMENT_6, 1, 0),
 SND_SOC_DAPM_ADC("ADCR", "Right HiFi Capture", WM8903_POWER_MANAGEMENT_6, 0, 0),
 
+SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux),
+SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux),
+
 SND_SOC_DAPM_DAC("DACL", "Left Playback", WM8903_POWER_MANAGEMENT_6, 3, 0),
 SND_SOC_DAPM_DAC("DACR", "Right Playback", WM8903_POWER_MANAGEMENT_6, 2, 0),
 
@@ -844,26 +861,29 @@
 SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
 		   1, 0, NULL, 0, wm8903_output_event,
 		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+		   SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
 		   0, 0, NULL, 0, wm8903_output_event,
 		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+		   SND_SOC_DAPM_PRE_PMD),
 
 SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0,
 		   NULL, 0, wm8903_output_event,
 		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+		   SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0,
 		   NULL, 0, wm8903_output_event,
 		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+		   SND_SOC_DAPM_PRE_PMD),
 
 SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0,
 		 NULL, 0),
 SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0,
 		 NULL, 0),
 
+SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0,
+		    wm8903_cp_event, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0),
 };
 
 static const struct snd_soc_dapm_route intercon[] = {
@@ -909,7 +929,19 @@
 	{ "Right Input PGA", NULL, "Right Input Mode Mux" },
 
 	{ "ADCL", NULL, "Left Input PGA" },
+	{ "ADCL", NULL, "CLK_DSP" },
 	{ "ADCR", NULL, "Right Input PGA" },
+	{ "ADCR", NULL, "CLK_DSP" },
+
+	{ "DACL Sidetone", "Left", "ADCL" },
+	{ "DACL Sidetone", "Right", "ADCR" },
+	{ "DACR Sidetone", "Left", "ADCL" },
+	{ "DACR Sidetone", "Right", "ADCR" },
+
+	{ "DACL", NULL, "DACL Sidetone" },
+	{ "DACL", NULL, "CLK_DSP" },
+	{ "DACR", NULL, "DACR Sidetone" },
+	{ "DACR", NULL, "CLK_DSP" },
 
 	{ "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" },
 	{ "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" },
@@ -951,6 +983,11 @@
 
 	{ "ROP", NULL, "Right Speaker PGA" },
 	{ "RON", NULL, "Right Speaker PGA" },
+
+	{ "Left Headphone Output PGA", NULL, "Charge Pump" },
+	{ "Right Headphone Output PGA", NULL, "Charge Pump" },
+	{ "Left Line Output PGA", NULL, "Charge Pump" },
+	{ "Right Line Output PGA", NULL, "Charge Pump" },
 };
 
 static int wm8903_add_widgets(struct snd_soc_codec *codec)
@@ -985,6 +1022,11 @@
 			wm8903_write(codec, WM8903_CLOCK_RATES_2,
 				     WM8903_CLK_SYS_ENA);
 
+			/* Change DC servo dither level in startup sequence */
+			wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, 0x11);
+			wm8903_write(codec, WM8903_WRITE_SEQUENCER_1, 0x1257);
+			wm8903_write(codec, WM8903_WRITE_SEQUENCER_2, 0x2);
+
 			wm8903_run_sequence(codec, 0);
 			wm8903_sync_reg_cache(codec, codec->reg_cache);
 
@@ -1277,14 +1319,8 @@
 	if (wm8903->master_substream) {
 		master_runtime = wm8903->master_substream->runtime;
 
-		dev_dbg(&i2c->dev, "Constraining to %d bits at %dHz\n",
-			master_runtime->sample_bits,
-			master_runtime->rate);
-
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_RATE,
-					     master_runtime->rate,
-					     master_runtime->rate);
+		dev_dbg(&i2c->dev, "Constraining to %d bits\n",
+			master_runtime->sample_bits);
 
 		snd_pcm_hw_constraint_minmax(substream->runtime,
 					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
@@ -1523,6 +1559,7 @@
 		 .formats = WM8903_FORMATS,
 	 },
 	.ops = &wm8903_dai_ops,
+	.symmetric_rates = 1,
 };
 EXPORT_SYMBOL_GPL(wm8903_dai);
 
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
new file mode 100644
index 0000000..b8e17d6
--- /dev/null
+++ b/sound/soc/codecs/wm8940.c
@@ -0,0 +1,955 @@
+/*
+ * wm8940.c  --  WM8940 ALSA Soc Audio driver
+ *
+ * Author: Jonathan Cameron <jic23@cam.ac.uk>
+ *
+ * Based on wm8510.c
+ *    Copyright  2006 Wolfson Microelectronics PLC.
+ *    Author:  Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Not currently handled:
+ * Notch filter control
+ * AUXMode (inverting vs mixer)
+ * No means to obtain current gain if alc enabled.
+ * No use made of gpio
+ * Fast VMID discharge for power down
+ * Soft Start
+ * DLR and ALR Swaps not enabled
+ * Digital Sidetone not supported
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8940.h"
+
+struct wm8940_priv {
+	unsigned int sysclk;
+	u16 reg_cache[WM8940_CACHEREGNUM];
+	struct snd_soc_codec codec;
+};
+
+static u16 wm8940_reg_defaults[] = {
+	0x8940, /* Soft Reset */
+	0x0000, /* Power 1 */
+	0x0000, /* Power 2 */
+	0x0000, /* Power 3 */
+	0x0010, /* Interface Control */
+	0x0000, /* Companding Control */
+	0x0140, /* Clock Control */
+	0x0000, /* Additional Controls */
+	0x0000, /* GPIO Control */
+	0x0002, /* Auto Increment Control */
+	0x0000, /* DAC Control */
+	0x00FF, /* DAC Volume */
+	0,
+	0,
+	0x0100, /* ADC Control */
+	0x00FF, /* ADC Volume */
+	0x0000, /* Notch Filter 1 Control 1 */
+	0x0000, /* Notch Filter 1 Control 2 */
+	0x0000, /* Notch Filter 2 Control 1 */
+	0x0000, /* Notch Filter 2 Control 2 */
+	0x0000, /* Notch Filter 3 Control 1 */
+	0x0000, /* Notch Filter 3 Control 2 */
+	0x0000, /* Notch Filter 4 Control 1 */
+	0x0000, /* Notch Filter 4 Control 2 */
+	0x0032, /* DAC Limit Control 1 */
+	0x0000, /* DAC Limit Control 2 */
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0x0038, /* ALC Control 1 */
+	0x000B, /* ALC Control 2 */
+	0x0032, /* ALC Control 3 */
+	0x0000, /* Noise Gate */
+	0x0041, /* PLLN */
+	0x000C, /* PLLK1 */
+	0x0093, /* PLLK2 */
+	0x00E9, /* PLLK3 */
+	0,
+	0,
+	0x0030, /* ALC Control 4 */
+	0,
+	0x0002, /* Input Control */
+	0x0050, /* PGA Gain */
+	0,
+	0x0002, /* ADC Boost Control */
+	0,
+	0x0002, /* Output Control */
+	0x0000, /* Speaker Mixer Control */
+	0,
+	0,
+	0,
+	0x0079, /* Speaker Volume */
+	0,
+	0x0000, /* Mono Mixer Control */
+};
+
+static inline unsigned int wm8940_read_reg_cache(struct snd_soc_codec *codec,
+						 unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+
+	if (reg >= ARRAY_SIZE(wm8940_reg_defaults))
+		return -1;
+
+	return cache[reg];
+}
+
+static inline int wm8940_write_reg_cache(struct snd_soc_codec *codec,
+					  u16 reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+
+	if (reg >= ARRAY_SIZE(wm8940_reg_defaults))
+		return -1;
+
+	cache[reg] = value;
+
+	return 0;
+}
+
+static int wm8940_write(struct snd_soc_codec *codec, unsigned int reg,
+			unsigned int value)
+{
+	int ret;
+	u8 data[3] = { reg,
+		       (value & 0xff00) >> 8,
+		       (value & 0x00ff)
+	};
+
+	wm8940_write_reg_cache(codec, reg, value);
+
+	ret = codec->hw_write(codec->control_data, data, 3);
+
+	if (ret < 0)
+		return ret;
+	else if (ret != 3)
+		return -EIO;
+	return 0;
+}
+
+static const char *wm8940_companding[] = { "Off", "NC", "u-law", "A-law" };
+static const struct soc_enum wm8940_adc_companding_enum
+= SOC_ENUM_SINGLE(WM8940_COMPANDINGCTL, 1, 4, wm8940_companding);
+static const struct soc_enum wm8940_dac_companding_enum
+= SOC_ENUM_SINGLE(WM8940_COMPANDINGCTL, 3, 4, wm8940_companding);
+
+static const char *wm8940_alc_mode_text[] = {"ALC", "Limiter"};
+static const struct soc_enum wm8940_alc_mode_enum
+= SOC_ENUM_SINGLE(WM8940_ALC3, 8, 2, wm8940_alc_mode_text);
+
+static const char *wm8940_mic_bias_level_text[] = {"0.9", "0.65"};
+static const struct soc_enum wm8940_mic_bias_level_enum
+= SOC_ENUM_SINGLE(WM8940_INPUTCTL, 8, 2, wm8940_mic_bias_level_text);
+
+static const char *wm8940_filter_mode_text[] = {"Audio", "Application"};
+static const struct soc_enum wm8940_filter_mode_enum
+= SOC_ENUM_SINGLE(WM8940_ADC, 7, 2, wm8940_filter_mode_text);
+
+static DECLARE_TLV_DB_SCALE(wm8940_spk_vol_tlv, -5700, 100, 1);
+static DECLARE_TLV_DB_SCALE(wm8940_att_tlv, -1000, 1000, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_pga_vol_tlv, -1200, 75, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_alc_min_tlv, -1200, 600, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_alc_max_tlv, 675, 600, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_alc_tar_tlv, -2250, 50, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_lim_boost_tlv, 0, 100, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_lim_thresh_tlv, -600, 100, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_adc_tlv, -12750, 50, 1);
+static DECLARE_TLV_DB_SCALE(wm8940_capture_boost_vol_tlv, 0, 2000, 0);
+
+static const struct snd_kcontrol_new wm8940_snd_controls[] = {
+	SOC_SINGLE("Digital Loopback Switch", WM8940_COMPANDINGCTL,
+		   6, 1, 0),
+	SOC_ENUM("DAC Companding", wm8940_dac_companding_enum),
+	SOC_ENUM("ADC Companding", wm8940_adc_companding_enum),
+
+	SOC_ENUM("ALC Mode", wm8940_alc_mode_enum),
+	SOC_SINGLE("ALC Switch", WM8940_ALC1, 8, 1, 0),
+	SOC_SINGLE_TLV("ALC Capture Max Gain", WM8940_ALC1,
+		       3, 7, 1, wm8940_alc_max_tlv),
+	SOC_SINGLE_TLV("ALC Capture Min Gain", WM8940_ALC1,
+		       0, 7, 0, wm8940_alc_min_tlv),
+	SOC_SINGLE_TLV("ALC Capture Target", WM8940_ALC2,
+		       0, 14, 0, wm8940_alc_tar_tlv),
+	SOC_SINGLE("ALC Capture Hold", WM8940_ALC2, 4, 10, 0),
+	SOC_SINGLE("ALC Capture Decay", WM8940_ALC3, 4, 10, 0),
+	SOC_SINGLE("ALC Capture Attach", WM8940_ALC3, 0, 10, 0),
+	SOC_SINGLE("ALC ZC Switch", WM8940_ALC4, 1, 1, 0),
+	SOC_SINGLE("ALC Capture Noise Gate Switch", WM8940_NOISEGATE,
+		   3, 1, 0),
+	SOC_SINGLE("ALC Capture Noise Gate Threshold", WM8940_NOISEGATE,
+		   0, 7, 0),
+
+	SOC_SINGLE("DAC Playback Limiter Switch", WM8940_DACLIM1, 8, 1, 0),
+	SOC_SINGLE("DAC Playback Limiter Attack", WM8940_DACLIM1, 0, 9, 0),
+	SOC_SINGLE("DAC Playback Limiter Decay", WM8940_DACLIM1, 4, 11, 0),
+	SOC_SINGLE_TLV("DAC Playback Limiter Threshold", WM8940_DACLIM2,
+		       4, 9, 1, wm8940_lim_thresh_tlv),
+	SOC_SINGLE_TLV("DAC Playback Limiter Boost", WM8940_DACLIM2,
+		       0, 12, 0, wm8940_lim_boost_tlv),
+
+	SOC_SINGLE("Capture PGA ZC Switch", WM8940_PGAGAIN, 7, 1, 0),
+	SOC_SINGLE_TLV("Capture PGA Volume", WM8940_PGAGAIN,
+		       0, 63, 0, wm8940_pga_vol_tlv),
+	SOC_SINGLE_TLV("Digital Playback Volume", WM8940_DACVOL,
+		       0, 255, 0, wm8940_adc_tlv),
+	SOC_SINGLE_TLV("Digital Capture Volume", WM8940_ADCVOL,
+		       0, 255, 0, wm8940_adc_tlv),
+	SOC_ENUM("Mic Bias Level", wm8940_mic_bias_level_enum),
+	SOC_SINGLE_TLV("Capture Boost Volue", WM8940_ADCBOOST,
+		       8, 1, 0, wm8940_capture_boost_vol_tlv),
+	SOC_SINGLE_TLV("Speaker Playback Volume", WM8940_SPKVOL,
+		       0, 63, 0, wm8940_spk_vol_tlv),
+	SOC_SINGLE("Speaker Playback Switch", WM8940_SPKVOL,  6, 1, 1),
+
+	SOC_SINGLE_TLV("Speaker Mixer Line Bypass Volume", WM8940_SPKVOL,
+		       8, 1, 1, wm8940_att_tlv),
+	SOC_SINGLE("Speaker Playback ZC Switch", WM8940_SPKVOL, 7, 1, 0),
+
+	SOC_SINGLE("Mono Out Switch", WM8940_MONOMIX, 6, 1, 1),
+	SOC_SINGLE_TLV("Mono Mixer Line Bypass Volume", WM8940_MONOMIX,
+		       7, 1, 1, wm8940_att_tlv),
+
+	SOC_SINGLE("High Pass Filter Switch", WM8940_ADC, 8, 1, 0),
+	SOC_ENUM("High Pass Filter Mode", wm8940_filter_mode_enum),
+	SOC_SINGLE("High Pass Filter Cut Off", WM8940_ADC, 4, 7, 0),
+	SOC_SINGLE("ADC Inversion Switch", WM8940_ADC, 0, 1, 0),
+	SOC_SINGLE("DAC Inversion Switch", WM8940_DAC, 0, 1, 0),
+	SOC_SINGLE("DAC Auto Mute Switch", WM8940_DAC, 2, 1, 0),
+	SOC_SINGLE("ZC Timeout Clock Switch", WM8940_ADDCNTRL, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8940_speaker_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Line Bypass Switch", WM8940_SPKMIX, 1, 1, 0),
+	SOC_DAPM_SINGLE("Aux Playback Switch", WM8940_SPKMIX, 5, 1, 0),
+	SOC_DAPM_SINGLE("PCM Playback Switch", WM8940_SPKMIX, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8940_mono_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Line Bypass Switch", WM8940_MONOMIX, 1, 1, 0),
+	SOC_DAPM_SINGLE("Aux Playback Switch", WM8940_MONOMIX, 2, 1, 0),
+	SOC_DAPM_SINGLE("PCM Playback Switch", WM8940_MONOMIX, 0, 1, 0),
+};
+
+static DECLARE_TLV_DB_SCALE(wm8940_boost_vol_tlv, -1500, 300, 1);
+static const struct snd_kcontrol_new wm8940_input_boost_controls[] = {
+	SOC_DAPM_SINGLE("Mic PGA Switch", WM8940_PGAGAIN, 6, 1, 1),
+	SOC_DAPM_SINGLE_TLV("Aux Volume", WM8940_ADCBOOST,
+			    0, 7, 0, wm8940_boost_vol_tlv),
+	SOC_DAPM_SINGLE_TLV("Mic Volume", WM8940_ADCBOOST,
+			    4, 7, 0, wm8940_boost_vol_tlv),
+};
+
+static const struct snd_kcontrol_new wm8940_micpga_controls[] = {
+	SOC_DAPM_SINGLE("AUX Switch", WM8940_INPUTCTL, 2, 1, 0),
+	SOC_DAPM_SINGLE("MICP Switch", WM8940_INPUTCTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("MICN Switch", WM8940_INPUTCTL, 1, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8940_dapm_widgets[] = {
+	SND_SOC_DAPM_MIXER("Speaker Mixer", WM8940_POWER3, 2, 0,
+			   &wm8940_speaker_mixer_controls[0],
+			   ARRAY_SIZE(wm8940_speaker_mixer_controls)),
+	SND_SOC_DAPM_MIXER("Mono Mixer", WM8940_POWER3, 3, 0,
+			   &wm8940_mono_mixer_controls[0],
+			   ARRAY_SIZE(wm8940_mono_mixer_controls)),
+	SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8940_POWER3, 0, 0),
+
+	SND_SOC_DAPM_PGA("SpkN Out", WM8940_POWER3, 5, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("SpkP Out", WM8940_POWER3, 6, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Mono Out", WM8940_POWER3, 7, 0, NULL, 0),
+	SND_SOC_DAPM_OUTPUT("MONOOUT"),
+	SND_SOC_DAPM_OUTPUT("SPKOUTP"),
+	SND_SOC_DAPM_OUTPUT("SPKOUTN"),
+
+	SND_SOC_DAPM_PGA("Aux Input", WM8940_POWER1, 6, 0, NULL, 0),
+	SND_SOC_DAPM_ADC("ADC", "HiFi Capture", WM8940_POWER2, 0, 0),
+	SND_SOC_DAPM_MIXER("Mic PGA", WM8940_POWER2, 2, 0,
+			   &wm8940_micpga_controls[0],
+			   ARRAY_SIZE(wm8940_micpga_controls)),
+	SND_SOC_DAPM_MIXER("Boost Mixer", WM8940_POWER2, 4, 0,
+			   &wm8940_input_boost_controls[0],
+			   ARRAY_SIZE(wm8940_input_boost_controls)),
+	SND_SOC_DAPM_MICBIAS("Mic Bias", WM8940_POWER1, 4, 0),
+
+	SND_SOC_DAPM_INPUT("MICN"),
+	SND_SOC_DAPM_INPUT("MICP"),
+	SND_SOC_DAPM_INPUT("AUX"),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* Mono output mixer */
+	{"Mono Mixer", "PCM Playback Switch", "DAC"},
+	{"Mono Mixer", "Aux Playback Switch", "Aux Input"},
+	{"Mono Mixer", "Line Bypass Switch", "Boost Mixer"},
+
+	/* Speaker output mixer */
+	{"Speaker Mixer", "PCM Playback Switch", "DAC"},
+	{"Speaker Mixer", "Aux Playback Switch", "Aux Input"},
+	{"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"},
+
+	/* Outputs */
+	{"Mono Out", NULL, "Mono Mixer"},
+	{"MONOOUT", NULL, "Mono Out"},
+	{"SpkN Out", NULL, "Speaker Mixer"},
+	{"SpkP Out", NULL, "Speaker Mixer"},
+	{"SPKOUTN", NULL, "SpkN Out"},
+	{"SPKOUTP", NULL, "SpkP Out"},
+
+	/*  Microphone PGA */
+	{"Mic PGA", "MICN Switch", "MICN"},
+	{"Mic PGA", "MICP Switch", "MICP"},
+	{"Mic PGA", "AUX Switch", "AUX"},
+
+	/* Boost Mixer */
+	{"Boost Mixer", "Mic PGA Switch", "Mic PGA"},
+	{"Boost Mixer", "Mic Volume",  "MICP"},
+	{"Boost Mixer", "Aux Volume", "Aux Input"},
+
+	{"ADC", NULL, "Boost Mixer"},
+};
+
+static int wm8940_add_widgets(struct snd_soc_codec *codec)
+{
+	int ret;
+
+	ret = snd_soc_dapm_new_controls(codec, wm8940_dapm_widgets,
+					ARRAY_SIZE(wm8940_dapm_widgets));
+	if (ret)
+		goto error_ret;
+	ret = snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+	if (ret)
+		goto error_ret;
+	ret = snd_soc_dapm_new_widgets(codec);
+
+error_ret:
+	return ret;
+}
+
+#define wm8940_reset(c) wm8940_write(c, WM8940_SOFTRESET, 0);
+
+static int wm8940_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			      unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = wm8940_read_reg_cache(codec, WM8940_IFACE) & 0xFE67;
+	u16 clk = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0x1fe;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		clk |= 1;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+	wm8940_write(codec, WM8940_CLOCK, clk);
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= (2 << 3);
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= (1 << 3);
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= (3 << 3);
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= (3 << 3) | (1 << 7);
+		break;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= (1 << 7);
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= (1 << 8);
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= (1 << 8) | (1 << 7);
+		break;
+	}
+
+	wm8940_write(codec, WM8940_IFACE, iface);
+
+	return 0;
+}
+
+static int wm8940_i2s_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 iface = wm8940_read_reg_cache(codec, WM8940_IFACE) & 0xFD9F;
+	u16 addcntrl = wm8940_read_reg_cache(codec, WM8940_ADDCNTRL) & 0xFFF1;
+	u16 companding =  wm8940_read_reg_cache(codec,
+						WM8940_COMPANDINGCTL) & 0xFFDF;
+	int ret;
+
+	/* LoutR control */
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE
+	    && params_channels(params) == 2)
+		iface |= (1 << 9);
+
+	switch (params_rate(params)) {
+	case SNDRV_PCM_RATE_8000:
+		addcntrl |= (0x5 << 1);
+		break;
+	case SNDRV_PCM_RATE_11025:
+		addcntrl |= (0x4 << 1);
+		break;
+	case SNDRV_PCM_RATE_16000:
+		addcntrl |= (0x3 << 1);
+		break;
+	case SNDRV_PCM_RATE_22050:
+		addcntrl |= (0x2 << 1);
+		break;
+	case SNDRV_PCM_RATE_32000:
+		addcntrl |= (0x1 << 1);
+		break;
+	case SNDRV_PCM_RATE_44100:
+	case SNDRV_PCM_RATE_48000:
+		break;
+	}
+	ret = wm8940_write(codec, WM8940_ADDCNTRL, addcntrl);
+	if (ret)
+		goto error_ret;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		companding = companding | (1 << 5);
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= (1 << 5);
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= (2 << 5);
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		iface |= (3 << 5);
+		break;
+	}
+	ret = wm8940_write(codec, WM8940_COMPANDINGCTL, companding);
+	if (ret)
+		goto error_ret;
+	ret = wm8940_write(codec, WM8940_IFACE, iface);
+
+error_ret:
+	return ret;
+}
+
+static int wm8940_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = wm8940_read_reg_cache(codec, WM8940_DAC) & 0xffbf;
+
+	if (mute)
+		mute_reg |= 0x40;
+
+	return wm8940_write(codec, WM8940_DAC, mute_reg);
+}
+
+static int wm8940_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	u16 val;
+	u16 pwr_reg = wm8940_read_reg_cache(codec, WM8940_POWER1) & 0x1F0;
+	int ret = 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		/* ensure bufioen and biasen */
+		pwr_reg |= (1 << 2) | (1 << 3);
+		/* Enable thermal shutdown */
+		val = wm8940_read_reg_cache(codec, WM8940_OUTPUTCTL);
+		ret = wm8940_write(codec, WM8940_OUTPUTCTL, val | 0x2);
+		if (ret)
+			break;
+		/* set vmid to 75k */
+		ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x1);
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		/* ensure bufioen and biasen */
+		pwr_reg |= (1 << 2) | (1 << 3);
+		ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x1);
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		/* ensure bufioen and biasen */
+		pwr_reg |= (1 << 2) | (1 << 3);
+		/* set vmid to 300k for standby */
+		ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x2);
+		break;
+	case SND_SOC_BIAS_OFF:
+		ret = wm8940_write(codec, WM8940_POWER1, pwr_reg);
+		break;
+	}
+
+	return ret;
+}
+
+struct pll_ {
+	unsigned int pre_scale:2;
+	unsigned int n:4;
+	unsigned int k;
+};
+
+static struct pll_ pll_div;
+
+/* The size in bits of the pll divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_PLL_SIZE ((1 << 24) * 10)
+static void pll_factors(unsigned int target, unsigned int source)
+{
+	unsigned long long Kpart;
+	unsigned int K, Ndiv, Nmod;
+	/* The left shift ist to avoid accuracy loss when right shifting */
+	Ndiv = target / source;
+
+	if (Ndiv > 12) {
+		source <<= 1;
+		/* Multiply by 2 */
+		pll_div.pre_scale = 0;
+		Ndiv = target / source;
+	} else if (Ndiv < 3) {
+		source >>= 2;
+		/* Divide by 4 */
+		pll_div.pre_scale = 3;
+		Ndiv = target / source;
+	} else if (Ndiv < 6) {
+		source >>= 1;
+		/* divide by 2 */
+		pll_div.pre_scale = 2;
+		Ndiv = target / source;
+	} else
+		pll_div.pre_scale = 1;
+
+	if ((Ndiv < 6) || (Ndiv > 12))
+		printk(KERN_WARNING
+			"WM8940 N value %d outwith recommended range!d\n",
+			Ndiv);
+
+	pll_div.n = Ndiv;
+	Nmod = target % source;
+	Kpart = FIXED_PLL_SIZE * (long long)Nmod;
+
+	do_div(Kpart, source);
+
+	K = Kpart & 0xFFFFFFFF;
+
+	/* Check if we need to round */
+	if ((K % 10) >= 5)
+		K += 5;
+
+	/* Move down to proper range now rounding is done */
+	K /= 10;
+
+	pll_div.k = K;
+}
+
+/* Untested at the moment */
+static int wm8940_set_dai_pll(struct snd_soc_dai *codec_dai,
+		int pll_id, unsigned int freq_in, unsigned int freq_out)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+
+	/* Turn off PLL */
+	reg = wm8940_read_reg_cache(codec, WM8940_POWER1);
+	wm8940_write(codec, WM8940_POWER1, reg & 0x1df);
+
+	if (freq_in == 0 || freq_out == 0) {
+		/* Clock CODEC directly from MCLK */
+		reg = wm8940_read_reg_cache(codec, WM8940_CLOCK);
+		wm8940_write(codec, WM8940_CLOCK, reg & 0x0ff);
+		/* Pll power down */
+		wm8940_write(codec, WM8940_PLLN, (1 << 7));
+		return 0;
+	}
+
+	/* Pll is followed by a frequency divide by 4 */
+	pll_factors(freq_out*4, freq_in);
+	if (pll_div.k)
+		wm8940_write(codec, WM8940_PLLN,
+			     (pll_div.pre_scale << 4) | pll_div.n | (1 << 6));
+	else /* No factional component */
+		wm8940_write(codec, WM8940_PLLN,
+			     (pll_div.pre_scale << 4) | pll_div.n);
+	wm8940_write(codec, WM8940_PLLK1, pll_div.k >> 18);
+	wm8940_write(codec, WM8940_PLLK2, (pll_div.k >> 9) & 0x1ff);
+	wm8940_write(codec, WM8940_PLLK3, pll_div.k & 0x1ff);
+	/* Enable the PLL */
+	reg = wm8940_read_reg_cache(codec, WM8940_POWER1);
+	wm8940_write(codec, WM8940_POWER1, reg | 0x020);
+
+	/* Run CODEC from PLL instead of MCLK */
+	reg = wm8940_read_reg_cache(codec, WM8940_CLOCK);
+	wm8940_write(codec, WM8940_CLOCK, reg | 0x100);
+
+	return 0;
+}
+
+static int wm8940_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+				 int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm8940_priv *wm8940 = codec->private_data;
+
+	switch (freq) {
+	case 11289600:
+	case 12000000:
+	case 12288000:
+	case 16934400:
+	case 18432000:
+		wm8940->sysclk = freq;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int wm8940_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
+				 int div_id, int div)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+	int ret = 0;
+
+	switch (div_id) {
+	case WM8940_BCLKDIV:
+		reg = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0xFFEF3;
+		ret = wm8940_write(codec, WM8940_CLOCK, reg | (div << 2));
+		break;
+	case WM8940_MCLKDIV:
+		reg = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0xFF1F;
+		ret = wm8940_write(codec, WM8940_CLOCK, reg | (div << 5));
+		break;
+	case WM8940_OPCLKDIV:
+		reg = wm8940_read_reg_cache(codec, WM8940_ADDCNTRL) & 0xFFCF;
+		ret = wm8940_write(codec, WM8940_ADDCNTRL, reg | (div << 4));
+		break;
+	}
+	return ret;
+}
+
+#define WM8940_RATES SNDRV_PCM_RATE_8000_48000
+
+#define WM8940_FORMATS (SNDRV_PCM_FMTBIT_S8 |				\
+			SNDRV_PCM_FMTBIT_S16_LE |			\
+			SNDRV_PCM_FMTBIT_S20_3LE |			\
+			SNDRV_PCM_FMTBIT_S24_LE |			\
+			SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm8940_dai_ops = {
+	.hw_params = wm8940_i2s_hw_params,
+	.set_sysclk = wm8940_set_dai_sysclk,
+	.digital_mute = wm8940_mute,
+	.set_fmt = wm8940_set_dai_fmt,
+	.set_clkdiv = wm8940_set_dai_clkdiv,
+	.set_pll = wm8940_set_dai_pll,
+};
+
+struct snd_soc_dai wm8940_dai = {
+	.name = "WM8940",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8940_RATES,
+		.formats = WM8940_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8940_RATES,
+		.formats = WM8940_FORMATS,
+	},
+	.ops = &wm8940_dai_ops,
+	.symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8940_dai);
+
+static int wm8940_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	return wm8940_set_bias_level(codec, SND_SOC_BIAS_OFF);
+}
+
+static int wm8940_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int i;
+	int ret;
+	u8 data[3];
+	u16 *cache = codec->reg_cache;
+
+	/* Sync reg_cache with the hardware
+	 * Could use auto incremented writes to speed this up
+	 */
+	for (i = 0; i < ARRAY_SIZE(wm8940_reg_defaults); i++) {
+		data[0] = i;
+		data[1] = (cache[i] & 0xFF00) >> 8;
+		data[2] = cache[i] & 0x00FF;
+		ret = codec->hw_write(codec->control_data, data, 3);
+		if (ret < 0)
+			goto error_ret;
+		else if (ret != 3) {
+			ret = -EIO;
+			goto error_ret;
+		}
+	}
+	ret = wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	if (ret)
+		goto error_ret;
+	ret = wm8940_set_bias_level(codec, codec->suspend_bias_level);
+
+error_ret:
+	return ret;
+}
+
+static struct snd_soc_codec *wm8940_codec;
+
+static int wm8940_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+
+	int ret = 0;
+
+	if (wm8940_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm8940_codec;
+	codec = wm8940_codec;
+
+	mutex_init(&codec->mutex);
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	ret = snd_soc_add_controls(codec, wm8940_snd_controls,
+			     ARRAY_SIZE(wm8940_snd_controls));
+	if (ret)
+		goto error_free_pcms;
+	ret = wm8940_add_widgets(codec);
+	if (ret)
+		goto error_free_pcms;
+
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to register card: %d\n", ret);
+		goto error_free_pcms;
+	}
+
+	return ret;
+
+error_free_pcms:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	return ret;
+}
+
+static int wm8940_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8940 = {
+	.probe = wm8940_probe,
+	.remove = wm8940_remove,
+	.suspend = wm8940_suspend,
+	.resume = wm8940_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8940);
+
+static int wm8940_register(struct wm8940_priv *wm8940)
+{
+	struct wm8940_setup_data *pdata = wm8940->codec.dev->platform_data;
+	struct snd_soc_codec *codec = &wm8940->codec;
+	int ret;
+	u16 reg;
+	if (wm8940_codec) {
+		dev_err(codec->dev, "Another WM8940 is registered\n");
+		return -EINVAL;
+	}
+
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm8940;
+	codec->name = "WM8940";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8940_read_reg_cache;
+	codec->write = wm8940_write;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm8940_set_bias_level;
+	codec->dai = &wm8940_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = ARRAY_SIZE(wm8940_reg_defaults);
+	codec->reg_cache = &wm8940->reg_cache;
+
+	memcpy(codec->reg_cache, wm8940_reg_defaults,
+	       sizeof(wm8940_reg_defaults));
+
+	ret = wm8940_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		return ret;
+	}
+
+	wm8940_dai.dev = codec->dev;
+
+	wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	ret = wm8940_write(codec, WM8940_POWER1, 0x180);
+	if (ret < 0)
+		return ret;
+
+	if (!pdata)
+		dev_warn(codec->dev, "No platform data supplied\n");
+	else {
+		reg = wm8940_read_reg_cache(codec, WM8940_OUTPUTCTL);
+		ret = wm8940_write(codec, WM8940_OUTPUTCTL, reg | pdata->vroi);
+		if (ret < 0)
+			return ret;
+	}
+
+
+	wm8940_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm8940_dai);
+	if (ret) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void wm8940_unregister(struct wm8940_priv *wm8940)
+{
+	wm8940_set_bias_level(&wm8940->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm8940_dai);
+	snd_soc_unregister_codec(&wm8940->codec);
+	kfree(wm8940);
+	wm8940_codec = NULL;
+}
+
+static int wm8940_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct wm8940_priv *wm8940;
+	struct snd_soc_codec *codec;
+
+	wm8940 = kzalloc(sizeof *wm8940, GFP_KERNEL);
+	if (wm8940 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8940->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+	i2c_set_clientdata(i2c, wm8940);
+	codec->control_data = i2c;
+	codec->dev = &i2c->dev;
+
+	return wm8940_register(wm8940);
+}
+
+static int __devexit wm8940_i2c_remove(struct i2c_client *client)
+{
+	struct wm8940_priv *wm8940 = i2c_get_clientdata(client);
+
+	wm8940_unregister(wm8940);
+
+	return 0;
+}
+
+static const struct i2c_device_id wm8940_i2c_id[] = {
+	{ "wm8940", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8940_i2c_id);
+
+static struct i2c_driver wm8940_i2c_driver = {
+	.driver = {
+		.name = "WM8940 I2C Codec",
+		.owner = THIS_MODULE,
+	},
+	.probe = wm8940_i2c_probe,
+	.remove = __devexit_p(wm8940_i2c_remove),
+	.id_table = wm8940_i2c_id,
+};
+
+static int __init wm8940_modinit(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&wm8940_i2c_driver);
+	if (ret)
+		printk(KERN_ERR "Failed to register WM8940 I2C driver: %d\n",
+		       ret);
+	return ret;
+}
+module_init(wm8940_modinit);
+
+static void __exit wm8940_exit(void)
+{
+	i2c_del_driver(&wm8940_i2c_driver);
+}
+module_exit(wm8940_exit);
+
+MODULE_DESCRIPTION("ASoC WM8940 driver");
+MODULE_AUTHOR("Jonathan Cameron");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8940.h b/sound/soc/codecs/wm8940.h
new file mode 100644
index 0000000..8410eed
--- /dev/null
+++ b/sound/soc/codecs/wm8940.h
@@ -0,0 +1,104 @@
+/*
+ * wm8940.h -- WM8940 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8940_H
+#define _WM8940_H
+
+struct wm8940_setup_data {
+	/* Vref to analogue output resistance */
+#define WM8940_VROI_1K 0
+#define WM8940_VROI_30K 1
+	unsigned int vroi:1;
+};
+extern struct snd_soc_dai wm8940_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8940;
+
+/* WM8940 register space */
+#define WM8940_SOFTRESET	0x00
+#define WM8940_POWER1		0x01
+#define WM8940_POWER2		0x02
+#define WM8940_POWER3		0x03
+#define WM8940_IFACE		0x04
+#define WM8940_COMPANDINGCTL	0x05
+#define WM8940_CLOCK		0x06
+#define WM8940_ADDCNTRL		0x07
+#define WM8940_GPIO		0x08
+#define WM8940_CTLINT		0x09
+#define WM8940_DAC		0x0A
+#define WM8940_DACVOL		0x0B
+
+#define WM8940_ADC		0x0E
+#define WM8940_ADCVOL		0x0F
+#define WM8940_NOTCH1		0x10
+#define WM8940_NOTCH2		0x11
+#define WM8940_NOTCH3		0x12
+#define WM8940_NOTCH4		0x13
+#define WM8940_NOTCH5		0x14
+#define WM8940_NOTCH6		0x15
+#define WM8940_NOTCH7		0x16
+#define WM8940_NOTCH8		0x17
+#define WM8940_DACLIM1		0x18
+#define WM8940_DACLIM2		0x19
+
+#define WM8940_ALC1		0x20
+#define WM8940_ALC2		0x21
+#define WM8940_ALC3		0x22
+#define WM8940_NOISEGATE	0x23
+#define WM8940_PLLN		0x24
+#define WM8940_PLLK1		0x25
+#define WM8940_PLLK2		0x26
+#define WM8940_PLLK3		0x27
+
+#define WM8940_ALC4		0x2A
+
+#define WM8940_INPUTCTL		0x2C
+#define WM8940_PGAGAIN		0x2D
+
+#define WM8940_ADCBOOST		0x2F
+
+#define WM8940_OUTPUTCTL	0x31
+#define WM8940_SPKMIX		0x32
+
+#define WM8940_SPKVOL		0x36
+
+#define WM8940_MONOMIX		0x38
+
+#define WM8940_CACHEREGNUM  0x57
+
+
+/* Clock divider Id's */
+#define WM8940_BCLKDIV 0
+#define WM8940_MCLKDIV 1
+#define WM8940_OPCLKDIV 2
+
+/* MCLK clock dividers */
+#define WM8940_MCLKDIV_1	0
+#define WM8940_MCLKDIV_1_5	1
+#define WM8940_MCLKDIV_2	2
+#define WM8940_MCLKDIV_3	3
+#define WM8940_MCLKDIV_4	4
+#define WM8940_MCLKDIV_6	5
+#define WM8940_MCLKDIV_8	6
+#define WM8940_MCLKDIV_12	7
+
+/* BCLK clock dividers */
+#define WM8940_BCLKDIV_1 0
+#define WM8940_BCLKDIV_2 1
+#define WM8940_BCLKDIV_4 2
+#define WM8940_BCLKDIV_8 3
+#define WM8940_BCLKDIV_16 4
+#define WM8940_BCLKDIV_32 5
+
+/* PLL Out Dividers */
+#define WM8940_OPCLKDIV_1 0
+#define WM8940_OPCLKDIV_2 1
+#define WM8940_OPCLKDIV_3 2
+#define WM8940_OPCLKDIV_4 3
+
+#endif /* _WM8940_H */
+
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
new file mode 100644
index 0000000..e224d8a
--- /dev/null
+++ b/sound/soc/codecs/wm8960.c
@@ -0,0 +1,969 @@
+/*
+ * wm8960.c  --  WM8960 ALSA SoC Audio driver
+ *
+ * Author: Liam Girdwood
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8960.h"
+
+#define AUDIO_NAME "wm8960"
+
+struct snd_soc_codec_device soc_codec_dev_wm8960;
+
+/* R25 - Power 1 */
+#define WM8960_VREF      0x40
+
+/* R28 - Anti-pop 1 */
+#define WM8960_POBCTRL   0x80
+#define WM8960_BUFDCOPEN 0x10
+#define WM8960_BUFIOEN   0x08
+#define WM8960_SOFT_ST   0x04
+#define WM8960_HPSTBY    0x01
+
+/* R29 - Anti-pop 2 */
+#define WM8960_DISOP     0x40
+
+/*
+ * wm8960 register cache
+ * We can't read the WM8960 register space when we are
+ * using 2 wire for device control, so we cache them instead.
+ */
+static const u16 wm8960_reg[WM8960_CACHEREGNUM] = {
+	0x0097, 0x0097, 0x0000, 0x0000,
+	0x0000, 0x0008, 0x0000, 0x000a,
+	0x01c0, 0x0000, 0x00ff, 0x00ff,
+	0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x007b, 0x0100, 0x0032,
+	0x0000, 0x00c3, 0x00c3, 0x01c0,
+	0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000,
+	0x0100, 0x0100, 0x0050, 0x0050,
+	0x0050, 0x0050, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0040, 0x0000,
+	0x0000, 0x0050, 0x0050, 0x0000,
+	0x0002, 0x0037, 0x004d, 0x0080,
+	0x0008, 0x0031, 0x0026, 0x00e9,
+};
+
+struct wm8960_priv {
+	u16 reg_cache[WM8960_CACHEREGNUM];
+	struct snd_soc_codec codec;
+};
+
+/*
+ * read wm8960 register cache
+ */
+static inline unsigned int wm8960_read_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg == WM8960_RESET)
+		return 0;
+	if (reg >= WM8960_CACHEREGNUM)
+		return -1;
+	return cache[reg];
+}
+
+/*
+ * write wm8960 register cache
+ */
+static inline void wm8960_write_reg_cache(struct snd_soc_codec *codec,
+	u16 reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg >= WM8960_CACHEREGNUM)
+		return;
+	cache[reg] = value;
+}
+
+static inline unsigned int wm8960_read(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	return wm8960_read_reg_cache(codec, reg);
+}
+
+/*
+ * write to the WM8960 register space
+ */
+static int wm8960_write(struct snd_soc_codec *codec, unsigned int reg,
+	unsigned int value)
+{
+	u8 data[2];
+
+	/* data is
+	 *   D15..D9 WM8960 register offset
+	 *   D8...D0 register data
+	 */
+	data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+	data[1] = value & 0x00ff;
+
+	wm8960_write_reg_cache(codec, reg, value);
+	if (codec->hw_write(codec->control_data, data, 2) == 2)
+		return 0;
+	else
+		return -EIO;
+}
+
+#define wm8960_reset(c)	wm8960_write(c, WM8960_RESET, 0)
+
+/* enumerated controls */
+static const char *wm8960_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"};
+static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted",
+	"Right Inverted", "Stereo Inversion"};
+static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"};
+static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"};
+static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"};
+static const char *wm8960_alcmode[] = {"ALC", "Limiter"};
+
+static const struct soc_enum wm8960_enum[] = {
+	SOC_ENUM_SINGLE(WM8960_DACCTL1, 1, 4, wm8960_deemph),
+	SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity),
+	SOC_ENUM_SINGLE(WM8960_DACCTL2, 5, 4, wm8960_polarity),
+	SOC_ENUM_SINGLE(WM8960_3D, 6, 2, wm8960_3d_upper_cutoff),
+	SOC_ENUM_SINGLE(WM8960_3D, 5, 2, wm8960_3d_lower_cutoff),
+	SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc),
+	SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode),
+};
+
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 50, 0);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1);
+static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+
+static const struct snd_kcontrol_new wm8960_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL,
+		 0, 63, 0, adc_tlv),
+SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL,
+	6, 1, 0),
+SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL,
+	7, 1, 0),
+
+SOC_DOUBLE_R_TLV("Playback Volume", WM8960_LDAC, WM8960_RDAC,
+		 0, 255, 0, dac_tlv),
+
+SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8960_LOUT1, WM8960_ROUT1,
+		 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8960_LOUT1, WM8960_ROUT1,
+	7, 1, 0),
+
+SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8960_LOUT2, WM8960_ROUT2,
+		 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8960_LOUT2, WM8960_ROUT2,
+	7, 1, 0),
+SOC_SINGLE("Speaker DC Volume", WM8960_CLASSD3, 3, 5, 0),
+SOC_SINGLE("Speaker AC Volume", WM8960_CLASSD3, 0, 5, 0),
+
+SOC_SINGLE("PCM Playback -6dB Switch", WM8960_DACCTL1, 7, 1, 0),
+SOC_ENUM("ADC Polarity", wm8960_enum[1]),
+SOC_ENUM("Playback De-emphasis", wm8960_enum[0]),
+SOC_SINGLE("ADC High Pass Filter Switch", WM8960_DACCTL1, 0, 1, 0),
+
+SOC_ENUM("DAC Polarity", wm8960_enum[2]),
+
+SOC_ENUM("3D Filter Upper Cut-Off", wm8960_enum[3]),
+SOC_ENUM("3D Filter Lower Cut-Off", wm8960_enum[4]),
+SOC_SINGLE("3D Volume", WM8960_3D, 1, 15, 0),
+SOC_SINGLE("3D Switch", WM8960_3D, 0, 1, 0),
+
+SOC_ENUM("ALC Function", wm8960_enum[5]),
+SOC_SINGLE("ALC Max Gain", WM8960_ALC1, 4, 7, 0),
+SOC_SINGLE("ALC Target", WM8960_ALC1, 0, 15, 1),
+SOC_SINGLE("ALC Min Gain", WM8960_ALC2, 4, 7, 0),
+SOC_SINGLE("ALC Hold Time", WM8960_ALC2, 0, 15, 0),
+SOC_ENUM("ALC Mode", wm8960_enum[6]),
+SOC_SINGLE("ALC Decay", WM8960_ALC3, 4, 15, 0),
+SOC_SINGLE("ALC Attack", WM8960_ALC3, 0, 15, 0),
+
+SOC_SINGLE("Noise Gate Threshold", WM8960_NOISEG, 3, 31, 0),
+SOC_SINGLE("Noise Gate Switch", WM8960_NOISEG, 0, 1, 0),
+
+SOC_DOUBLE_R("ADC PCM Capture Volume", WM8960_LINPATH, WM8960_RINPATH,
+	0, 127, 0),
+
+SOC_SINGLE_TLV("Left Output Mixer Boost Bypass Volume",
+	       WM8960_BYPASS1, 4, 7, 1, bypass_tlv),
+SOC_SINGLE_TLV("Left Output Mixer LINPUT3 Volume",
+	       WM8960_LOUTMIX, 4, 7, 1, bypass_tlv),
+SOC_SINGLE_TLV("Right Output Mixer Boost Bypass Volume",
+	       WM8960_BYPASS2, 4, 7, 1, bypass_tlv),
+SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume",
+	       WM8960_ROUTMIX, 4, 7, 1, bypass_tlv),
+};
+
+static const struct snd_kcontrol_new wm8960_lin_boost[] = {
+SOC_DAPM_SINGLE("LINPUT2 Switch", WM8960_LINPATH, 6, 1, 0),
+SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LINPATH, 7, 1, 0),
+SOC_DAPM_SINGLE("LINPUT1 Switch", WM8960_LINPATH, 8, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_lin[] = {
+SOC_DAPM_SINGLE("Boost Switch", WM8960_LINPATH, 3, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_rin_boost[] = {
+SOC_DAPM_SINGLE("RINPUT2 Switch", WM8960_RINPATH, 6, 1, 0),
+SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_RINPATH, 7, 1, 0),
+SOC_DAPM_SINGLE("RINPUT1 Switch", WM8960_RINPATH, 8, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_rin[] = {
+SOC_DAPM_SINGLE("Boost Switch", WM8960_RINPATH, 3, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_loutput_mixer[] = {
+SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_LOUTMIX, 8, 1, 0),
+SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LOUTMIX, 7, 1, 0),
+SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS1, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_routput_mixer[] = {
+SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_ROUTMIX, 8, 1, 0),
+SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_ROUTMIX, 7, 1, 0),
+SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS2, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_mono_out[] = {
+SOC_DAPM_SINGLE("Left Switch", WM8960_MONOMIX1, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Switch", WM8960_MONOMIX2, 7, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8960_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("LINPUT1"),
+SND_SOC_DAPM_INPUT("RINPUT1"),
+SND_SOC_DAPM_INPUT("LINPUT2"),
+SND_SOC_DAPM_INPUT("RINPUT2"),
+SND_SOC_DAPM_INPUT("LINPUT3"),
+SND_SOC_DAPM_INPUT("RINPUT3"),
+
+SND_SOC_DAPM_MICBIAS("MICB", WM8960_POWER1, 1, 0),
+
+SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8960_POWER1, 5, 0,
+		   wm8960_lin_boost, ARRAY_SIZE(wm8960_lin_boost)),
+SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8960_POWER1, 4, 0,
+		   wm8960_rin_boost, ARRAY_SIZE(wm8960_rin_boost)),
+
+SND_SOC_DAPM_MIXER("Left Input Mixer", WM8960_POWER3, 5, 0,
+		   wm8960_lin, ARRAY_SIZE(wm8960_lin)),
+SND_SOC_DAPM_MIXER("Right Input Mixer", WM8960_POWER3, 4, 0,
+		   wm8960_rin, ARRAY_SIZE(wm8960_rin)),
+
+SND_SOC_DAPM_ADC("Left ADC", "Capture", WM8960_POWER2, 3, 0),
+SND_SOC_DAPM_ADC("Right ADC", "Capture", WM8960_POWER2, 2, 0),
+
+SND_SOC_DAPM_DAC("Left DAC", "Playback", WM8960_POWER2, 8, 0),
+SND_SOC_DAPM_DAC("Right DAC", "Playback", WM8960_POWER2, 7, 0),
+
+SND_SOC_DAPM_MIXER("Left Output Mixer", WM8960_POWER3, 3, 0,
+	&wm8960_loutput_mixer[0],
+	ARRAY_SIZE(wm8960_loutput_mixer)),
+SND_SOC_DAPM_MIXER("Right Output Mixer", WM8960_POWER3, 2, 0,
+	&wm8960_routput_mixer[0],
+	ARRAY_SIZE(wm8960_routput_mixer)),
+
+SND_SOC_DAPM_MIXER("Mono Output Mixer", WM8960_POWER2, 1, 0,
+	&wm8960_mono_out[0],
+	ARRAY_SIZE(wm8960_mono_out)),
+
+SND_SOC_DAPM_PGA("LOUT1 PGA", WM8960_POWER2, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("ROUT1 PGA", WM8960_POWER2, 5, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA("Left Speaker PGA", WM8960_POWER2, 4, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Speaker PGA", WM8960_POWER2, 3, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA("Right Speaker Output", WM8960_CLASSD1, 7, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Left Speaker Output", WM8960_CLASSD1, 6, 0, NULL, 0),
+
+SND_SOC_DAPM_OUTPUT("SPK_LP"),
+SND_SOC_DAPM_OUTPUT("SPK_LN"),
+SND_SOC_DAPM_OUTPUT("HP_L"),
+SND_SOC_DAPM_OUTPUT("HP_R"),
+SND_SOC_DAPM_OUTPUT("SPK_RP"),
+SND_SOC_DAPM_OUTPUT("SPK_RN"),
+SND_SOC_DAPM_OUTPUT("OUT3"),
+};
+
+static const struct snd_soc_dapm_route audio_paths[] = {
+	{ "Left Boost Mixer", "LINPUT1 Switch", "LINPUT1" },
+	{ "Left Boost Mixer", "LINPUT2 Switch", "LINPUT2" },
+	{ "Left Boost Mixer", "LINPUT3 Switch", "LINPUT3" },
+
+	{ "Left Input Mixer", "Boost Switch", "Left Boost Mixer", },
+	{ "Left Input Mixer", NULL, "LINPUT1", },  /* Really Boost Switch */
+	{ "Left Input Mixer", NULL, "LINPUT2" },
+	{ "Left Input Mixer", NULL, "LINPUT3" },
+
+	{ "Right Boost Mixer", "RINPUT1 Switch", "RINPUT1" },
+	{ "Right Boost Mixer", "RINPUT2 Switch", "RINPUT2" },
+	{ "Right Boost Mixer", "RINPUT3 Switch", "RINPUT3" },
+
+	{ "Right Input Mixer", "Boost Switch", "Right Boost Mixer", },
+	{ "Right Input Mixer", NULL, "RINPUT1", },  /* Really Boost Switch */
+	{ "Right Input Mixer", NULL, "RINPUT2" },
+	{ "Right Input Mixer", NULL, "LINPUT3" },
+
+	{ "Left ADC", NULL, "Left Input Mixer" },
+	{ "Right ADC", NULL, "Right Input Mixer" },
+
+	{ "Left Output Mixer", "LINPUT3 Switch", "LINPUT3" },
+	{ "Left Output Mixer", "Boost Bypass Switch", "Left Boost Mixer"} ,
+	{ "Left Output Mixer", "PCM Playback Switch", "Left DAC" },
+
+	{ "Right Output Mixer", "RINPUT3 Switch", "RINPUT3" },
+	{ "Right Output Mixer", "Boost Bypass Switch", "Right Boost Mixer" } ,
+	{ "Right Output Mixer", "PCM Playback Switch", "Right DAC" },
+
+	{ "Mono Output Mixer", "Left Switch", "Left Output Mixer" },
+	{ "Mono Output Mixer", "Right Switch", "Right Output Mixer" },
+
+	{ "LOUT1 PGA", NULL, "Left Output Mixer" },
+	{ "ROUT1 PGA", NULL, "Right Output Mixer" },
+
+	{ "HP_L", NULL, "LOUT1 PGA" },
+	{ "HP_R", NULL, "ROUT1 PGA" },
+
+	{ "Left Speaker PGA", NULL, "Left Output Mixer" },
+	{ "Right Speaker PGA", NULL, "Right Output Mixer" },
+
+	{ "Left Speaker Output", NULL, "Left Speaker PGA" },
+	{ "Right Speaker Output", NULL, "Right Speaker PGA" },
+
+	{ "SPK_LN", NULL, "Left Speaker Output" },
+	{ "SPK_LP", NULL, "Left Speaker Output" },
+	{ "SPK_RN", NULL, "Right Speaker Output" },
+	{ "SPK_RP", NULL, "Right Speaker Output" },
+
+	{ "OUT3", NULL, "Mono Output Mixer", }
+};
+
+static int wm8960_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, wm8960_dapm_widgets,
+				  ARRAY_SIZE(wm8960_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
+
+	snd_soc_dapm_new_widgets(codec);
+	return 0;
+}
+
+static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = 0;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iface |= 0x0040;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= 0x0002;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= 0x0001;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= 0x0003;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= 0x0013;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= 0x0090;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= 0x0080;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= 0x0010;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set iface */
+	wm8960_write(codec, WM8960_IFACE1, iface);
+	return 0;
+}
+
+static int wm8960_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params,
+			    struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 iface = wm8960_read(codec, WM8960_IFACE1) & 0xfff3;
+
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= 0x0004;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= 0x0008;
+		break;
+	}
+
+	/* set iface */
+	wm8960_write(codec, WM8960_IFACE1, iface);
+	return 0;
+}
+
+static int wm8960_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = wm8960_read(codec, WM8960_DACCTL1) & 0xfff7;
+
+	if (mute)
+		wm8960_write(codec, WM8960_DACCTL1, mute_reg | 0x8);
+	else
+		wm8960_write(codec, WM8960_DACCTL1, mute_reg);
+	return 0;
+}
+
+static int wm8960_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	struct wm8960_data *pdata = codec->dev->platform_data;
+	u16 reg;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+
+	case SND_SOC_BIAS_PREPARE:
+		/* Set VMID to 2x50k */
+		reg = wm8960_read(codec, WM8960_POWER1);
+		reg &= ~0x180;
+		reg |= 0x80;
+		wm8960_write(codec, WM8960_POWER1, reg);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		if (codec->bias_level == SND_SOC_BIAS_OFF) {
+			/* Enable anti-pop features */
+			wm8960_write(codec, WM8960_APOP1,
+				     WM8960_POBCTRL | WM8960_SOFT_ST |
+				     WM8960_BUFDCOPEN | WM8960_BUFIOEN);
+
+			/* Discharge HP output */
+			reg = WM8960_DISOP;
+			if (pdata)
+				reg |= pdata->dres << 4;
+			wm8960_write(codec, WM8960_APOP2, reg);
+
+			msleep(400);
+
+			wm8960_write(codec, WM8960_APOP2, 0);
+
+			/* Enable & ramp VMID at 2x50k */
+			reg = wm8960_read(codec, WM8960_POWER1);
+			reg |= 0x80;
+			wm8960_write(codec, WM8960_POWER1, reg);
+			msleep(100);
+
+			/* Enable VREF */
+			wm8960_write(codec, WM8960_POWER1, reg | WM8960_VREF);
+
+			/* Disable anti-pop features */
+			wm8960_write(codec, WM8960_APOP1, WM8960_BUFIOEN);
+		}
+
+		/* Set VMID to 2x250k */
+		reg = wm8960_read(codec, WM8960_POWER1);
+		reg &= ~0x180;
+		reg |= 0x100;
+		wm8960_write(codec, WM8960_POWER1, reg);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		/* Enable anti-pop features */
+		wm8960_write(codec, WM8960_APOP1,
+			     WM8960_POBCTRL | WM8960_SOFT_ST |
+			     WM8960_BUFDCOPEN | WM8960_BUFIOEN);
+
+		/* Disable VMID and VREF, let them discharge */
+		wm8960_write(codec, WM8960_POWER1, 0);
+		msleep(600);
+
+		wm8960_write(codec, WM8960_APOP1, 0);
+		break;
+	}
+
+	codec->bias_level = level;
+
+	return 0;
+}
+
+/* PLL divisors */
+struct _pll_div {
+	u32 pre_div:1;
+	u32 n:4;
+	u32 k:24;
+};
+
+/* The size in bits of the pll divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_PLL_SIZE ((1 << 24) * 10)
+
+static int pll_factors(unsigned int source, unsigned int target,
+		       struct _pll_div *pll_div)
+{
+	unsigned long long Kpart;
+	unsigned int K, Ndiv, Nmod;
+
+	pr_debug("WM8960 PLL: setting %dHz->%dHz\n", source, target);
+
+	/* Scale up target to PLL operating frequency */
+	target *= 4;
+
+	Ndiv = target / source;
+	if (Ndiv < 6) {
+		source >>= 1;
+		pll_div->pre_div = 1;
+		Ndiv = target / source;
+	} else
+		pll_div->pre_div = 0;
+
+	if ((Ndiv < 6) || (Ndiv > 12)) {
+		pr_err("WM8960 PLL: Unsupported N=%d\n", Ndiv);
+		return -EINVAL;
+	}
+
+	pll_div->n = Ndiv;
+	Nmod = target % source;
+	Kpart = FIXED_PLL_SIZE * (long long)Nmod;
+
+	do_div(Kpart, source);
+
+	K = Kpart & 0xFFFFFFFF;
+
+	/* Check if we need to round */
+	if ((K % 10) >= 5)
+		K += 5;
+
+	/* Move down to proper range now rounding is done */
+	K /= 10;
+
+	pll_div->k = K;
+
+	pr_debug("WM8960 PLL: N=%x K=%x pre_div=%d\n",
+		 pll_div->n, pll_div->k, pll_div->pre_div);
+
+	return 0;
+}
+
+static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai,
+		int pll_id, unsigned int freq_in, unsigned int freq_out)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+	static struct _pll_div pll_div;
+	int ret;
+
+	if (freq_in && freq_out) {
+		ret = pll_factors(freq_in, freq_out, &pll_div);
+		if (ret != 0)
+			return ret;
+	}
+
+	/* Disable the PLL: even if we are changing the frequency the
+	 * PLL needs to be disabled while we do so. */
+	wm8960_write(codec, WM8960_CLOCK1,
+		     wm8960_read(codec, WM8960_CLOCK1) & ~1);
+	wm8960_write(codec, WM8960_POWER2,
+		     wm8960_read(codec, WM8960_POWER2) & ~1);
+
+	if (!freq_in || !freq_out)
+		return 0;
+
+	reg = wm8960_read(codec, WM8960_PLL1) & ~0x3f;
+	reg |= pll_div.pre_div << 4;
+	reg |= pll_div.n;
+
+	if (pll_div.k) {
+		reg |= 0x20;
+
+		wm8960_write(codec, WM8960_PLL2, (pll_div.k >> 18) & 0x3f);
+		wm8960_write(codec, WM8960_PLL3, (pll_div.k >> 9) & 0x1ff);
+		wm8960_write(codec, WM8960_PLL4, pll_div.k & 0x1ff);
+	}
+	wm8960_write(codec, WM8960_PLL1, reg);
+
+	/* Turn it on */
+	wm8960_write(codec, WM8960_POWER2,
+		     wm8960_read(codec, WM8960_POWER2) | 1);
+	msleep(250);
+	wm8960_write(codec, WM8960_CLOCK1,
+		     wm8960_read(codec, WM8960_CLOCK1) | 1);
+
+	return 0;
+}
+
+static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
+		int div_id, int div)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+
+	switch (div_id) {
+	case WM8960_SYSCLKSEL:
+		reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1fe;
+		wm8960_write(codec, WM8960_CLOCK1, reg | div);
+		break;
+	case WM8960_SYSCLKDIV:
+		reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1f9;
+		wm8960_write(codec, WM8960_CLOCK1, reg | div);
+		break;
+	case WM8960_DACDIV:
+		reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1c7;
+		wm8960_write(codec, WM8960_CLOCK1, reg | div);
+		break;
+	case WM8960_OPCLKDIV:
+		reg = wm8960_read(codec, WM8960_PLL1) & 0x03f;
+		wm8960_write(codec, WM8960_PLL1, reg | div);
+		break;
+	case WM8960_DCLKDIV:
+		reg = wm8960_read(codec, WM8960_CLOCK2) & 0x03f;
+		wm8960_write(codec, WM8960_CLOCK2, reg | div);
+		break;
+	case WM8960_TOCLKSEL:
+		reg = wm8960_read(codec, WM8960_ADDCTL1) & 0x1fd;
+		wm8960_write(codec, WM8960_ADDCTL1, reg | div);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+#define WM8960_RATES SNDRV_PCM_RATE_8000_48000
+
+#define WM8960_FORMATS \
+	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+	SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops wm8960_dai_ops = {
+	.hw_params = wm8960_hw_params,
+	.digital_mute = wm8960_mute,
+	.set_fmt = wm8960_set_dai_fmt,
+	.set_clkdiv = wm8960_set_dai_clkdiv,
+	.set_pll = wm8960_set_dai_pll,
+};
+
+struct snd_soc_dai wm8960_dai = {
+	.name = "WM8960",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8960_RATES,
+		.formats = WM8960_FORMATS,},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8960_RATES,
+		.formats = WM8960_FORMATS,},
+	.ops = &wm8960_dai_ops,
+	.symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8960_dai);
+
+static int wm8960_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	wm8960_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int wm8960_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int i;
+	u8 data[2];
+	u16 *cache = codec->reg_cache;
+
+	/* Sync reg_cache with the hardware */
+	for (i = 0; i < ARRAY_SIZE(wm8960_reg); i++) {
+		data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+		data[1] = cache[i] & 0x00ff;
+		codec->hw_write(codec->control_data, data, 2);
+	}
+
+	wm8960_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	wm8960_set_bias_level(codec, codec->suspend_bias_level);
+	return 0;
+}
+
+static struct snd_soc_codec *wm8960_codec;
+
+static int wm8960_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (wm8960_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm8960_codec;
+	codec = wm8960_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, wm8960_snd_controls,
+			     ARRAY_SIZE(wm8960_snd_controls));
+	wm8960_add_widgets(codec);
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to register card: %d\n", ret);
+		goto card_err;
+	}
+
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	return ret;
+}
+
+/* power down chip */
+static int wm8960_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8960 = {
+	.probe = 	wm8960_probe,
+	.remove = 	wm8960_remove,
+	.suspend = 	wm8960_suspend,
+	.resume =	wm8960_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8960);
+
+static int wm8960_register(struct wm8960_priv *wm8960)
+{
+	struct wm8960_data *pdata = wm8960->codec.dev->platform_data;
+	struct snd_soc_codec *codec = &wm8960->codec;
+	int ret;
+	u16 reg;
+
+	if (wm8960_codec) {
+		dev_err(codec->dev, "Another WM8960 is registered\n");
+		return -EINVAL;
+	}
+
+	if (!pdata) {
+		dev_warn(codec->dev, "No platform data supplied\n");
+	} else {
+		if (pdata->dres > WM8960_DRES_MAX) {
+			dev_err(codec->dev, "Invalid DRES: %d\n", pdata->dres);
+			pdata->dres = 0;
+		}
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm8960;
+	codec->name = "WM8960";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8960_read_reg_cache;
+	codec->write = wm8960_write;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm8960_set_bias_level;
+	codec->dai = &wm8960_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = WM8960_CACHEREGNUM;
+	codec->reg_cache = &wm8960->reg_cache;
+
+	memcpy(codec->reg_cache, wm8960_reg, sizeof(wm8960_reg));
+
+	ret = wm8960_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		return ret;
+	}
+
+	wm8960_dai.dev = codec->dev;
+
+	wm8960_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	/* Latch the update bits */
+	reg = wm8960_read(codec, WM8960_LINVOL);
+	wm8960_write(codec, WM8960_LINVOL, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_RINVOL);
+	wm8960_write(codec, WM8960_RINVOL, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_LADC);
+	wm8960_write(codec, WM8960_LADC, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_RADC);
+	wm8960_write(codec, WM8960_RADC, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_LDAC);
+	wm8960_write(codec, WM8960_LDAC, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_RDAC);
+	wm8960_write(codec, WM8960_RDAC, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_LOUT1);
+	wm8960_write(codec, WM8960_LOUT1, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_ROUT1);
+	wm8960_write(codec, WM8960_ROUT1, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_LOUT2);
+	wm8960_write(codec, WM8960_LOUT2, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_ROUT2);
+	wm8960_write(codec, WM8960_ROUT2, reg | 0x100);
+
+	wm8960_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm8960_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void wm8960_unregister(struct wm8960_priv *wm8960)
+{
+	wm8960_set_bias_level(&wm8960->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm8960_dai);
+	snd_soc_unregister_codec(&wm8960->codec);
+	kfree(wm8960);
+	wm8960_codec = NULL;
+}
+
+static __devinit int wm8960_i2c_probe(struct i2c_client *i2c,
+				      const struct i2c_device_id *id)
+{
+	struct wm8960_priv *wm8960;
+	struct snd_soc_codec *codec;
+
+	wm8960 = kzalloc(sizeof(struct wm8960_priv), GFP_KERNEL);
+	if (wm8960 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8960->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+
+	i2c_set_clientdata(i2c, wm8960);
+	codec->control_data = i2c;
+
+	codec->dev = &i2c->dev;
+
+	return wm8960_register(wm8960);
+}
+
+static __devexit int wm8960_i2c_remove(struct i2c_client *client)
+{
+	struct wm8960_priv *wm8960 = i2c_get_clientdata(client);
+	wm8960_unregister(wm8960);
+	return 0;
+}
+
+static const struct i2c_device_id wm8960_i2c_id[] = {
+	{ "wm8960", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8960_i2c_id);
+
+static struct i2c_driver wm8960_i2c_driver = {
+	.driver = {
+		.name = "WM8960 I2C Codec",
+		.owner = THIS_MODULE,
+	},
+	.probe =    wm8960_i2c_probe,
+	.remove =   __devexit_p(wm8960_i2c_remove),
+	.id_table = wm8960_i2c_id,
+};
+
+static int __init wm8960_modinit(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&wm8960_i2c_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register WM8960 I2C driver: %d\n",
+		       ret);
+	}
+
+	return ret;
+}
+module_init(wm8960_modinit);
+
+static void __exit wm8960_exit(void)
+{
+	i2c_del_driver(&wm8960_i2c_driver);
+}
+module_exit(wm8960_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM8960 driver");
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8960.h b/sound/soc/codecs/wm8960.h
new file mode 100644
index 0000000..c9af56c
--- /dev/null
+++ b/sound/soc/codecs/wm8960.h
@@ -0,0 +1,127 @@
+/*
+ * wm8960.h  --  WM8960 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8960_H
+#define _WM8960_H
+
+/* WM8960 register space */
+
+
+#define WM8960_CACHEREGNUM 	56
+
+#define WM8960_LINVOL		0x0
+#define WM8960_RINVOL		0x1
+#define WM8960_LOUT1		0x2
+#define WM8960_ROUT1		0x3
+#define WM8960_CLOCK1		0x4
+#define WM8960_DACCTL1		0x5
+#define WM8960_DACCTL2		0x6
+#define WM8960_IFACE1		0x7
+#define WM8960_CLOCK2		0x8
+#define WM8960_IFACE2		0x9
+#define WM8960_LDAC		0xa
+#define WM8960_RDAC		0xb
+
+#define WM8960_RESET		0xf
+#define WM8960_3D		0x10
+#define WM8960_ALC1		0x11
+#define WM8960_ALC2		0x12
+#define WM8960_ALC3		0x13
+#define WM8960_NOISEG		0x14
+#define WM8960_LADC		0x15
+#define WM8960_RADC		0x16
+#define WM8960_ADDCTL1		0x17
+#define WM8960_ADDCTL2		0x18
+#define WM8960_POWER1		0x19
+#define WM8960_POWER2		0x1a
+#define WM8960_ADDCTL3		0x1b
+#define WM8960_APOP1		0x1c
+#define WM8960_APOP2		0x1d
+
+#define WM8960_LINPATH		0x20
+#define WM8960_RINPATH		0x21
+#define WM8960_LOUTMIX		0x22
+
+#define WM8960_ROUTMIX		0x25
+#define WM8960_MONOMIX1		0x26
+#define WM8960_MONOMIX2		0x27
+#define WM8960_LOUT2		0x28
+#define WM8960_ROUT2		0x29
+#define WM8960_MONO		0x2a
+#define WM8960_INBMIX1		0x2b
+#define WM8960_INBMIX2		0x2c
+#define WM8960_BYPASS1		0x2d
+#define WM8960_BYPASS2		0x2e
+#define WM8960_POWER3		0x2f
+#define WM8960_ADDCTL4		0x30
+#define WM8960_CLASSD1		0x31
+
+#define WM8960_CLASSD3		0x33
+#define WM8960_PLL1		0x34
+#define WM8960_PLL2		0x35
+#define WM8960_PLL3		0x36
+#define WM8960_PLL4		0x37
+
+
+/*
+ * WM8960 Clock dividers
+ */
+#define WM8960_SYSCLKDIV 		0
+#define WM8960_DACDIV			1
+#define WM8960_OPCLKDIV			2
+#define WM8960_DCLKDIV			3
+#define WM8960_TOCLKSEL			4
+#define WM8960_SYSCLKSEL		5
+
+#define WM8960_SYSCLK_DIV_1		(0 << 1)
+#define WM8960_SYSCLK_DIV_2		(2 << 1)
+
+#define WM8960_SYSCLK_MCLK		(0 << 0)
+#define WM8960_SYSCLK_PLL		(1 << 0)
+
+#define WM8960_DAC_DIV_1		(0 << 3)
+#define WM8960_DAC_DIV_1_5		(1 << 3)
+#define WM8960_DAC_DIV_2		(2 << 3)
+#define WM8960_DAC_DIV_3		(3 << 3)
+#define WM8960_DAC_DIV_4		(4 << 3)
+#define WM8960_DAC_DIV_5_5		(5 << 3)
+#define WM8960_DAC_DIV_6		(6 << 3)
+
+#define WM8960_DCLK_DIV_1_5		(0 << 6)
+#define WM8960_DCLK_DIV_2		(1 << 6)
+#define WM8960_DCLK_DIV_3		(2 << 6)
+#define WM8960_DCLK_DIV_4		(3 << 6)
+#define WM8960_DCLK_DIV_6		(4 << 6)
+#define WM8960_DCLK_DIV_8		(5 << 6)
+#define WM8960_DCLK_DIV_12		(6 << 6)
+#define WM8960_DCLK_DIV_16		(7 << 6)
+
+#define WM8960_TOCLK_F19		(0 << 1)
+#define WM8960_TOCLK_F21		(1 << 1)
+
+#define WM8960_OPCLK_DIV_1		(0 << 0)
+#define WM8960_OPCLK_DIV_2		(1 << 0)
+#define WM8960_OPCLK_DIV_3		(2 << 0)
+#define WM8960_OPCLK_DIV_4		(3 << 0)
+#define WM8960_OPCLK_DIV_5_5		(4 << 0)
+#define WM8960_OPCLK_DIV_6		(5 << 0)
+
+extern struct snd_soc_dai wm8960_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8960;
+
+#define WM8960_DRES_400R 0
+#define WM8960_DRES_200R 1
+#define WM8960_DRES_600R 2
+#define WM8960_DRES_150R 3
+#define WM8960_DRES_MAX  3
+
+struct wm8960_data {
+	int dres;
+};
+
+#endif
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
new file mode 100644
index 0000000..c05f718
--- /dev/null
+++ b/sound/soc/codecs/wm8988.c
@@ -0,0 +1,1097 @@
+/*
+ * wm8988.c -- WM8988 ALSA SoC audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include "wm8988.h"
+
+/*
+ * wm8988 register cache
+ * We can't read the WM8988 register space when we
+ * are using 2 wire for device control, so we cache them instead.
+ */
+static const u16 wm8988_reg[] = {
+	0x0097, 0x0097, 0x0079, 0x0079,  /*  0 */
+	0x0000, 0x0008, 0x0000, 0x000a,  /*  4 */
+	0x0000, 0x0000, 0x00ff, 0x00ff,  /*  8 */
+	0x000f, 0x000f, 0x0000, 0x0000,  /* 12 */
+	0x0000, 0x007b, 0x0000, 0x0032,  /* 16 */
+	0x0000, 0x00c3, 0x00c3, 0x00c0,  /* 20 */
+	0x0000, 0x0000, 0x0000, 0x0000,  /* 24 */
+	0x0000, 0x0000, 0x0000, 0x0000,  /* 28 */
+	0x0000, 0x0000, 0x0050, 0x0050,  /* 32 */
+	0x0050, 0x0050, 0x0050, 0x0050,  /* 36 */
+	0x0079, 0x0079, 0x0079,          /* 40 */
+};
+
+/* codec private data */
+struct wm8988_priv {
+	unsigned int sysclk;
+	struct snd_soc_codec codec;
+	struct snd_pcm_hw_constraint_list *sysclk_constraints;
+	u16 reg_cache[WM8988_NUM_REG];
+};
+
+
+/*
+ * read wm8988 register cache
+ */
+static inline unsigned int wm8988_read_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg > WM8988_NUM_REG)
+		return -1;
+	return cache[reg];
+}
+
+/*
+ * write wm8988 register cache
+ */
+static inline void wm8988_write_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg > WM8988_NUM_REG)
+		return;
+	cache[reg] = value;
+}
+
+static int wm8988_write(struct snd_soc_codec *codec, unsigned int reg,
+	unsigned int value)
+{
+	u8 data[2];
+
+	/* data is
+	 *   D15..D9 WM8753 register offset
+	 *   D8...D0 register data
+	 */
+	data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+	data[1] = value & 0x00ff;
+
+	wm8988_write_reg_cache(codec, reg, value);
+	if (codec->hw_write(codec->control_data, data, 2) == 2)
+		return 0;
+	else
+		return -EIO;
+}
+
+#define wm8988_reset(c)	wm8988_write(c, WM8988_RESET, 0)
+
+/*
+ * WM8988 Controls
+ */
+
+static const char *bass_boost_txt[] = {"Linear Control", "Adaptive Boost"};
+static const struct soc_enum bass_boost =
+	SOC_ENUM_SINGLE(WM8988_BASS, 7, 2, bass_boost_txt);
+
+static const char *bass_filter_txt[] = { "130Hz @ 48kHz", "200Hz @ 48kHz" };
+static const struct soc_enum bass_filter =
+	SOC_ENUM_SINGLE(WM8988_BASS, 6, 2, bass_filter_txt);
+
+static const char *treble_txt[] = {"8kHz", "4kHz"};
+static const struct soc_enum treble =
+	SOC_ENUM_SINGLE(WM8988_TREBLE, 6, 2, treble_txt);
+
+static const char *stereo_3d_lc_txt[] = {"200Hz", "500Hz"};
+static const struct soc_enum stereo_3d_lc =
+	SOC_ENUM_SINGLE(WM8988_3D, 5, 2, stereo_3d_lc_txt);
+
+static const char *stereo_3d_uc_txt[] = {"2.2kHz", "1.5kHz"};
+static const struct soc_enum stereo_3d_uc =
+	SOC_ENUM_SINGLE(WM8988_3D, 6, 2, stereo_3d_uc_txt);
+
+static const char *stereo_3d_func_txt[] = {"Capture", "Playback"};
+static const struct soc_enum stereo_3d_func =
+	SOC_ENUM_SINGLE(WM8988_3D, 7, 2, stereo_3d_func_txt);
+
+static const char *alc_func_txt[] = {"Off", "Right", "Left", "Stereo"};
+static const struct soc_enum alc_func =
+	SOC_ENUM_SINGLE(WM8988_ALC1, 7, 4, alc_func_txt);
+
+static const char *ng_type_txt[] = {"Constant PGA Gain",
+				    "Mute ADC Output"};
+static const struct soc_enum ng_type =
+	SOC_ENUM_SINGLE(WM8988_NGATE, 1, 2, ng_type_txt);
+
+static const char *deemph_txt[] = {"None", "32Khz", "44.1Khz", "48Khz"};
+static const struct soc_enum deemph =
+	SOC_ENUM_SINGLE(WM8988_ADCDAC, 1, 4, deemph_txt);
+
+static const char *adcpol_txt[] = {"Normal", "L Invert", "R Invert",
+				   "L + R Invert"};
+static const struct soc_enum adcpol =
+	SOC_ENUM_SINGLE(WM8988_ADCDAC, 5, 4, adcpol_txt);
+
+static const DECLARE_TLV_DB_SCALE(pga_tlv, -1725, 75, 0);
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0);
+
+static const struct snd_kcontrol_new wm8988_snd_controls[] = {
+
+SOC_ENUM("Bass Boost", bass_boost),
+SOC_ENUM("Bass Filter", bass_filter),
+SOC_SINGLE("Bass Volume", WM8988_BASS, 0, 15, 1),
+
+SOC_SINGLE("Treble Volume", WM8988_TREBLE, 0, 15, 0),
+SOC_ENUM("Treble Cut-off", treble),
+
+SOC_SINGLE("3D Switch", WM8988_3D, 0, 1, 0),
+SOC_SINGLE("3D Volume", WM8988_3D, 1, 15, 0),
+SOC_ENUM("3D Lower Cut-off", stereo_3d_lc),
+SOC_ENUM("3D Upper Cut-off", stereo_3d_uc),
+SOC_ENUM("3D Mode", stereo_3d_func),
+
+SOC_SINGLE("ALC Capture Target Volume", WM8988_ALC1, 0, 7, 0),
+SOC_SINGLE("ALC Capture Max Volume", WM8988_ALC1, 4, 7, 0),
+SOC_ENUM("ALC Capture Function", alc_func),
+SOC_SINGLE("ALC Capture ZC Switch", WM8988_ALC2, 7, 1, 0),
+SOC_SINGLE("ALC Capture Hold Time", WM8988_ALC2, 0, 15, 0),
+SOC_SINGLE("ALC Capture Decay Time", WM8988_ALC3, 4, 15, 0),
+SOC_SINGLE("ALC Capture Attack Time", WM8988_ALC3, 0, 15, 0),
+SOC_SINGLE("ALC Capture NG Threshold", WM8988_NGATE, 3, 31, 0),
+SOC_ENUM("ALC Capture NG Type", ng_type),
+SOC_SINGLE("ALC Capture NG Switch", WM8988_NGATE, 0, 1, 0),
+
+SOC_SINGLE("ZC Timeout Switch", WM8988_ADCTL1, 0, 1, 0),
+
+SOC_DOUBLE_R_TLV("Capture Digital Volume", WM8988_LADC, WM8988_RADC,
+		 0, 255, 0, adc_tlv),
+SOC_DOUBLE_R_TLV("Capture Volume", WM8988_LINVOL, WM8988_RINVOL,
+		 0, 63, 0, pga_tlv),
+SOC_DOUBLE_R("Capture ZC Switch", WM8988_LINVOL, WM8988_RINVOL, 6, 1, 0),
+SOC_DOUBLE_R("Capture Switch", WM8988_LINVOL, WM8988_RINVOL, 7, 1, 1),
+
+SOC_ENUM("Playback De-emphasis", deemph),
+
+SOC_ENUM("Capture Polarity", adcpol),
+SOC_SINGLE("Playback 6dB Attenuate", WM8988_ADCDAC, 7, 1, 0),
+SOC_SINGLE("Capture 6dB Attenuate", WM8988_ADCDAC, 8, 1, 0),
+
+SOC_DOUBLE_R_TLV("PCM Volume", WM8988_LDAC, WM8988_RDAC, 0, 255, 0, dac_tlv),
+
+SOC_SINGLE_TLV("Left Mixer Left Bypass Volume", WM8988_LOUTM1, 4, 7, 1,
+	       bypass_tlv),
+SOC_SINGLE_TLV("Left Mixer Right Bypass Volume", WM8988_LOUTM2, 4, 7, 1,
+	       bypass_tlv),
+SOC_SINGLE_TLV("Right Mixer Left Bypass Volume", WM8988_ROUTM1, 4, 7, 1,
+	       bypass_tlv),
+SOC_SINGLE_TLV("Right Mixer Right Bypass Volume", WM8988_ROUTM2, 4, 7, 1,
+	       bypass_tlv),
+
+SOC_DOUBLE_R("Output 1 Playback ZC Switch", WM8988_LOUT1V,
+	     WM8988_ROUT1V, 7, 1, 0),
+SOC_DOUBLE_R_TLV("Output 1 Playback Volume", WM8988_LOUT1V, WM8988_ROUT1V,
+		 0, 127, 0, out_tlv),
+
+SOC_DOUBLE_R("Output 2 Playback ZC Switch", WM8988_LOUT2V,
+	     WM8988_ROUT2V, 7, 1, 0),
+SOC_DOUBLE_R_TLV("Output 2 Playback Volume", WM8988_LOUT2V, WM8988_ROUT2V,
+		 0, 127, 0, out_tlv),
+
+};
+
+/*
+ * DAPM Controls
+ */
+
+static int wm8988_lrc_control(struct snd_soc_dapm_widget *w,
+			      struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	u16 adctl2 = wm8988_read_reg_cache(codec, WM8988_ADCTL2);
+
+	/* Use the DAC to gate LRC if active, otherwise use ADC */
+	if (wm8988_read_reg_cache(codec, WM8988_PWR2) & 0x180)
+		adctl2 &= ~0x4;
+	else
+		adctl2 |= 0x4;
+
+	return wm8988_write(codec, WM8988_ADCTL2, adctl2);
+}
+
+static const char *wm8988_line_texts[] = {
+	"Line 1", "Line 2", "PGA", "Differential"};
+
+static const unsigned int wm8988_line_values[] = {
+	0, 1, 3, 4};
+
+static const struct soc_enum wm8988_lline_enum =
+	SOC_VALUE_ENUM_SINGLE(WM8988_LOUTM1, 0, 7,
+			      ARRAY_SIZE(wm8988_line_texts),
+			      wm8988_line_texts,
+			      wm8988_line_values);
+static const struct snd_kcontrol_new wm8988_left_line_controls =
+	SOC_DAPM_VALUE_ENUM("Route", wm8988_lline_enum);
+
+static const struct soc_enum wm8988_rline_enum =
+	SOC_VALUE_ENUM_SINGLE(WM8988_ROUTM1, 0, 7,
+			      ARRAY_SIZE(wm8988_line_texts),
+			      wm8988_line_texts,
+			      wm8988_line_values);
+static const struct snd_kcontrol_new wm8988_right_line_controls =
+	SOC_DAPM_VALUE_ENUM("Route", wm8988_lline_enum);
+
+/* Left Mixer */
+static const struct snd_kcontrol_new wm8988_left_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Playback Switch", WM8988_LOUTM1, 8, 1, 0),
+	SOC_DAPM_SINGLE("Left Bypass Switch", WM8988_LOUTM1, 7, 1, 0),
+	SOC_DAPM_SINGLE("Right Playback Switch", WM8988_LOUTM2, 8, 1, 0),
+	SOC_DAPM_SINGLE("Right Bypass Switch", WM8988_LOUTM2, 7, 1, 0),
+};
+
+/* Right Mixer */
+static const struct snd_kcontrol_new wm8988_right_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Left Playback Switch", WM8988_ROUTM1, 8, 1, 0),
+	SOC_DAPM_SINGLE("Left Bypass Switch", WM8988_ROUTM1, 7, 1, 0),
+	SOC_DAPM_SINGLE("Playback Switch", WM8988_ROUTM2, 8, 1, 0),
+	SOC_DAPM_SINGLE("Right Bypass Switch", WM8988_ROUTM2, 7, 1, 0),
+};
+
+static const char *wm8988_pga_sel[] = {"Line 1", "Line 2", "Differential"};
+static const unsigned int wm8988_pga_val[] = { 0, 1, 3 };
+
+/* Left PGA Mux */
+static const struct soc_enum wm8988_lpga_enum =
+	SOC_VALUE_ENUM_SINGLE(WM8988_LADCIN, 6, 3,
+			      ARRAY_SIZE(wm8988_pga_sel),
+			      wm8988_pga_sel,
+			      wm8988_pga_val);
+static const struct snd_kcontrol_new wm8988_left_pga_controls =
+	SOC_DAPM_VALUE_ENUM("Route", wm8988_lpga_enum);
+
+/* Right PGA Mux */
+static const struct soc_enum wm8988_rpga_enum =
+	SOC_VALUE_ENUM_SINGLE(WM8988_RADCIN, 6, 3,
+			      ARRAY_SIZE(wm8988_pga_sel),
+			      wm8988_pga_sel,
+			      wm8988_pga_val);
+static const struct snd_kcontrol_new wm8988_right_pga_controls =
+	SOC_DAPM_VALUE_ENUM("Route", wm8988_rpga_enum);
+
+/* Differential Mux */
+static const char *wm8988_diff_sel[] = {"Line 1", "Line 2"};
+static const struct soc_enum diffmux =
+	SOC_ENUM_SINGLE(WM8988_ADCIN, 8, 2, wm8988_diff_sel);
+static const struct snd_kcontrol_new wm8988_diffmux_controls =
+	SOC_DAPM_ENUM("Route", diffmux);
+
+/* Mono ADC Mux */
+static const char *wm8988_mono_mux[] = {"Stereo", "Mono (Left)",
+	"Mono (Right)", "Digital Mono"};
+static const struct soc_enum monomux =
+	SOC_ENUM_SINGLE(WM8988_ADCIN, 6, 4, wm8988_mono_mux);
+static const struct snd_kcontrol_new wm8988_monomux_controls =
+	SOC_DAPM_ENUM("Route", monomux);
+
+static const struct snd_soc_dapm_widget wm8988_dapm_widgets[] = {
+	SND_SOC_DAPM_MICBIAS("Mic Bias", WM8988_PWR1, 1, 0),
+
+	SND_SOC_DAPM_MUX("Differential Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_diffmux_controls),
+	SND_SOC_DAPM_MUX("Left ADC Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_monomux_controls),
+	SND_SOC_DAPM_MUX("Right ADC Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_monomux_controls),
+
+	SND_SOC_DAPM_MUX("Left PGA Mux", WM8988_PWR1, 5, 0,
+		&wm8988_left_pga_controls),
+	SND_SOC_DAPM_MUX("Right PGA Mux", WM8988_PWR1, 4, 0,
+		&wm8988_right_pga_controls),
+
+	SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_left_line_controls),
+	SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_right_line_controls),
+
+	SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8988_PWR1, 2, 0),
+	SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8988_PWR1, 3, 0),
+
+	SND_SOC_DAPM_DAC("Right DAC", "Right Playback", WM8988_PWR2, 7, 0),
+	SND_SOC_DAPM_DAC("Left DAC", "Left Playback", WM8988_PWR2, 8, 0),
+
+	SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0,
+		&wm8988_left_mixer_controls[0],
+		ARRAY_SIZE(wm8988_left_mixer_controls)),
+	SND_SOC_DAPM_MIXER("Right Mixer", SND_SOC_NOPM, 0, 0,
+		&wm8988_right_mixer_controls[0],
+		ARRAY_SIZE(wm8988_right_mixer_controls)),
+
+	SND_SOC_DAPM_PGA("Right Out 2", WM8988_PWR2, 3, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Left Out 2", WM8988_PWR2, 4, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Right Out 1", WM8988_PWR2, 5, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Left Out 1", WM8988_PWR2, 6, 0, NULL, 0),
+
+	SND_SOC_DAPM_POST("LRC control", wm8988_lrc_control),
+
+	SND_SOC_DAPM_OUTPUT("LOUT1"),
+	SND_SOC_DAPM_OUTPUT("ROUT1"),
+	SND_SOC_DAPM_OUTPUT("LOUT2"),
+	SND_SOC_DAPM_OUTPUT("ROUT2"),
+	SND_SOC_DAPM_OUTPUT("VREF"),
+
+	SND_SOC_DAPM_INPUT("LINPUT1"),
+	SND_SOC_DAPM_INPUT("LINPUT2"),
+	SND_SOC_DAPM_INPUT("RINPUT1"),
+	SND_SOC_DAPM_INPUT("RINPUT2"),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+
+	{ "Left Line Mux", "Line 1", "LINPUT1" },
+	{ "Left Line Mux", "Line 2", "LINPUT2" },
+	{ "Left Line Mux", "PGA", "Left PGA Mux" },
+	{ "Left Line Mux", "Differential", "Differential Mux" },
+
+	{ "Right Line Mux", "Line 1", "RINPUT1" },
+	{ "Right Line Mux", "Line 2", "RINPUT2" },
+	{ "Right Line Mux", "PGA", "Right PGA Mux" },
+	{ "Right Line Mux", "Differential", "Differential Mux" },
+
+	{ "Left PGA Mux", "Line 1", "LINPUT1" },
+	{ "Left PGA Mux", "Line 2", "LINPUT2" },
+	{ "Left PGA Mux", "Differential", "Differential Mux" },
+
+	{ "Right PGA Mux", "Line 1", "RINPUT1" },
+	{ "Right PGA Mux", "Line 2", "RINPUT2" },
+	{ "Right PGA Mux", "Differential", "Differential Mux" },
+
+	{ "Differential Mux", "Line 1", "LINPUT1" },
+	{ "Differential Mux", "Line 1", "RINPUT1" },
+	{ "Differential Mux", "Line 2", "LINPUT2" },
+	{ "Differential Mux", "Line 2", "RINPUT2" },
+
+	{ "Left ADC Mux", "Stereo", "Left PGA Mux" },
+	{ "Left ADC Mux", "Mono (Left)", "Left PGA Mux" },
+	{ "Left ADC Mux", "Digital Mono", "Left PGA Mux" },
+
+	{ "Right ADC Mux", "Stereo", "Right PGA Mux" },
+	{ "Right ADC Mux", "Mono (Right)", "Right PGA Mux" },
+	{ "Right ADC Mux", "Digital Mono", "Right PGA Mux" },
+
+	{ "Left ADC", NULL, "Left ADC Mux" },
+	{ "Right ADC", NULL, "Right ADC Mux" },
+
+	{ "Left Line Mux", "Line 1", "LINPUT1" },
+	{ "Left Line Mux", "Line 2", "LINPUT2" },
+	{ "Left Line Mux", "PGA", "Left PGA Mux" },
+	{ "Left Line Mux", "Differential", "Differential Mux" },
+
+	{ "Right Line Mux", "Line 1", "RINPUT1" },
+	{ "Right Line Mux", "Line 2", "RINPUT2" },
+	{ "Right Line Mux", "PGA", "Right PGA Mux" },
+	{ "Right Line Mux", "Differential", "Differential Mux" },
+
+	{ "Left Mixer", "Playback Switch", "Left DAC" },
+	{ "Left Mixer", "Left Bypass Switch", "Left Line Mux" },
+	{ "Left Mixer", "Right Playback Switch", "Right DAC" },
+	{ "Left Mixer", "Right Bypass Switch", "Right Line Mux" },
+
+	{ "Right Mixer", "Left Playback Switch", "Left DAC" },
+	{ "Right Mixer", "Left Bypass Switch", "Left Line Mux" },
+	{ "Right Mixer", "Playback Switch", "Right DAC" },
+	{ "Right Mixer", "Right Bypass Switch", "Right Line Mux" },
+
+	{ "Left Out 1", NULL, "Left Mixer" },
+	{ "LOUT1", NULL, "Left Out 1" },
+	{ "Right Out 1", NULL, "Right Mixer" },
+	{ "ROUT1", NULL, "Right Out 1" },
+
+	{ "Left Out 2", NULL, "Left Mixer" },
+	{ "LOUT2", NULL, "Left Out 2" },
+	{ "Right Out 2", NULL, "Right Mixer" },
+	{ "ROUT2", NULL, "Right Out 2" },
+};
+
+struct _coeff_div {
+	u32 mclk;
+	u32 rate;
+	u16 fs;
+	u8 sr:5;
+	u8 usb:1;
+};
+
+/* codec hifi mclk clock divider coefficients */
+static const struct _coeff_div coeff_div[] = {
+	/* 8k */
+	{12288000, 8000, 1536, 0x6, 0x0},
+	{11289600, 8000, 1408, 0x16, 0x0},
+	{18432000, 8000, 2304, 0x7, 0x0},
+	{16934400, 8000, 2112, 0x17, 0x0},
+	{12000000, 8000, 1500, 0x6, 0x1},
+
+	/* 11.025k */
+	{11289600, 11025, 1024, 0x18, 0x0},
+	{16934400, 11025, 1536, 0x19, 0x0},
+	{12000000, 11025, 1088, 0x19, 0x1},
+
+	/* 16k */
+	{12288000, 16000, 768, 0xa, 0x0},
+	{18432000, 16000, 1152, 0xb, 0x0},
+	{12000000, 16000, 750, 0xa, 0x1},
+
+	/* 22.05k */
+	{11289600, 22050, 512, 0x1a, 0x0},
+	{16934400, 22050, 768, 0x1b, 0x0},
+	{12000000, 22050, 544, 0x1b, 0x1},
+
+	/* 32k */
+	{12288000, 32000, 384, 0xc, 0x0},
+	{18432000, 32000, 576, 0xd, 0x0},
+	{12000000, 32000, 375, 0xa, 0x1},
+
+	/* 44.1k */
+	{11289600, 44100, 256, 0x10, 0x0},
+	{16934400, 44100, 384, 0x11, 0x0},
+	{12000000, 44100, 272, 0x11, 0x1},
+
+	/* 48k */
+	{12288000, 48000, 256, 0x0, 0x0},
+	{18432000, 48000, 384, 0x1, 0x0},
+	{12000000, 48000, 250, 0x0, 0x1},
+
+	/* 88.2k */
+	{11289600, 88200, 128, 0x1e, 0x0},
+	{16934400, 88200, 192, 0x1f, 0x0},
+	{12000000, 88200, 136, 0x1f, 0x1},
+
+	/* 96k */
+	{12288000, 96000, 128, 0xe, 0x0},
+	{18432000, 96000, 192, 0xf, 0x0},
+	{12000000, 96000, 125, 0xe, 0x1},
+};
+
+static inline int get_coeff(int mclk, int rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(coeff_div); i++) {
+		if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+/* The set of rates we can generate from the above for each SYSCLK */
+
+static unsigned int rates_12288[] = {
+	8000, 12000, 16000, 24000, 24000, 32000, 48000, 96000,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_12288 = {
+	.count	= ARRAY_SIZE(rates_12288),
+	.list	= rates_12288,
+};
+
+static unsigned int rates_112896[] = {
+	8000, 11025, 22050, 44100,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_112896 = {
+	.count	= ARRAY_SIZE(rates_112896),
+	.list	= rates_112896,
+};
+
+static unsigned int rates_12[] = {
+	8000, 11025, 12000, 16000, 22050, 2400, 32000, 41100, 48000,
+	48000, 88235, 96000,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_12 = {
+	.count	= ARRAY_SIZE(rates_12),
+	.list	= rates_12,
+};
+
+/*
+ * Note that this should be called from init rather than from hw_params.
+ */
+static int wm8988_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm8988_priv *wm8988 = codec->private_data;
+
+	switch (freq) {
+	case 11289600:
+	case 18432000:
+	case 22579200:
+	case 36864000:
+		wm8988->sysclk_constraints = &constraints_112896;
+		wm8988->sysclk = freq;
+		return 0;
+
+	case 12288000:
+	case 16934400:
+	case 24576000:
+	case 33868800:
+		wm8988->sysclk_constraints = &constraints_12288;
+		wm8988->sysclk = freq;
+		return 0;
+
+	case 12000000:
+	case 24000000:
+		wm8988->sysclk_constraints = &constraints_12;
+		wm8988->sysclk = freq;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int wm8988_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = 0;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iface = 0x0040;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= 0x0002;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= 0x0001;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= 0x0003;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= 0x0013;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= 0x0090;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= 0x0080;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= 0x0010;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm8988_write(codec, WM8988_IFACE, iface);
+	return 0;
+}
+
+static int wm8988_pcm_startup(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm8988_priv *wm8988 = codec->private_data;
+
+	/* The set of sample rates that can be supported depends on the
+	 * MCLK supplied to the CODEC - enforce this.
+	 */
+	if (!wm8988->sysclk) {
+		dev_err(codec->dev,
+			"No MCLK configured, call set_sysclk() on init\n");
+		return -EINVAL;
+	}
+
+	snd_pcm_hw_constraint_list(substream->runtime, 0,
+				   SNDRV_PCM_HW_PARAM_RATE,
+				   wm8988->sysclk_constraints);
+
+	return 0;
+}
+
+static int wm8988_pcm_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	struct wm8988_priv *wm8988 = codec->private_data;
+	u16 iface = wm8988_read_reg_cache(codec, WM8988_IFACE) & 0x1f3;
+	u16 srate = wm8988_read_reg_cache(codec, WM8988_SRATE) & 0x180;
+	int coeff;
+
+	coeff = get_coeff(wm8988->sysclk, params_rate(params));
+	if (coeff < 0) {
+		coeff = get_coeff(wm8988->sysclk / 2, params_rate(params));
+		srate |= 0x40;
+	}
+	if (coeff < 0) {
+		dev_err(codec->dev,
+			"Unable to configure sample rate %dHz with %dHz MCLK\n",
+			params_rate(params), wm8988->sysclk);
+		return coeff;
+	}
+
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= 0x0004;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= 0x0008;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		iface |= 0x000c;
+		break;
+	}
+
+	/* set iface & srate */
+	wm8988_write(codec, WM8988_IFACE, iface);
+	if (coeff >= 0)
+		wm8988_write(codec, WM8988_SRATE, srate |
+			(coeff_div[coeff].sr << 1) | coeff_div[coeff].usb);
+
+	return 0;
+}
+
+static int wm8988_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = wm8988_read_reg_cache(codec, WM8988_ADCDAC) & 0xfff7;
+
+	if (mute)
+		wm8988_write(codec, WM8988_ADCDAC, mute_reg | 0x8);
+	else
+		wm8988_write(codec, WM8988_ADCDAC, mute_reg);
+	return 0;
+}
+
+static int wm8988_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	u16 pwr_reg = wm8988_read_reg_cache(codec, WM8988_PWR1) & ~0x1c1;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+
+	case SND_SOC_BIAS_PREPARE:
+		/* VREF, VMID=2x50k, digital enabled */
+		wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x00c0);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		if (codec->bias_level == SND_SOC_BIAS_OFF) {
+			/* VREF, VMID=2x5k */
+			wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x1c1);
+
+			/* Charge caps */
+			msleep(100);
+		}
+
+		/* VREF, VMID=2*500k, digital stopped */
+		wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x0141);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		wm8988_write(codec, WM8988_PWR1, 0x0000);
+		break;
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+#define WM8988_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM8988_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+	SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops wm8988_ops = {
+	.startup = wm8988_pcm_startup,
+	.hw_params = wm8988_pcm_hw_params,
+	.set_fmt = wm8988_set_dai_fmt,
+	.set_sysclk = wm8988_set_dai_sysclk,
+	.digital_mute = wm8988_mute,
+};
+
+struct snd_soc_dai wm8988_dai = {
+	.name = "WM8988",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8988_RATES,
+		.formats = WM8988_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8988_RATES,
+		.formats = WM8988_FORMATS,
+	 },
+	.ops = &wm8988_ops,
+	.symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8988_dai);
+
+static int wm8988_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	wm8988_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int wm8988_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int i;
+	u8 data[2];
+	u16 *cache = codec->reg_cache;
+
+	/* Sync reg_cache with the hardware */
+	for (i = 0; i < WM8988_NUM_REG; i++) {
+		if (i == WM8988_RESET)
+			continue;
+		data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+		data[1] = cache[i] & 0x00ff;
+		codec->hw_write(codec->control_data, data, 2);
+	}
+
+	wm8988_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	return 0;
+}
+
+static struct snd_soc_codec *wm8988_codec;
+
+static int wm8988_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (wm8988_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm8988_codec;
+	codec = wm8988_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, wm8988_snd_controls,
+				ARRAY_SIZE(wm8988_snd_controls));
+	snd_soc_dapm_new_controls(codec, wm8988_dapm_widgets,
+				  ARRAY_SIZE(wm8988_dapm_widgets));
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+	snd_soc_dapm_new_widgets(codec);
+
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to register card: %d\n", ret);
+		goto card_err;
+	}
+
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	return ret;
+}
+
+static int wm8988_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8988 = {
+	.probe = 	wm8988_probe,
+	.remove = 	wm8988_remove,
+	.suspend = 	wm8988_suspend,
+	.resume =	wm8988_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8988);
+
+static int wm8988_register(struct wm8988_priv *wm8988)
+{
+	struct snd_soc_codec *codec = &wm8988->codec;
+	int ret;
+	u16 reg;
+
+	if (wm8988_codec) {
+		dev_err(codec->dev, "Another WM8988 is registered\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm8988;
+	codec->name = "WM8988";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8988_read_reg_cache;
+	codec->write = wm8988_write;
+	codec->dai = &wm8988_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = ARRAY_SIZE(wm8988->reg_cache);
+	codec->reg_cache = &wm8988->reg_cache;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm8988_set_bias_level;
+
+	memcpy(codec->reg_cache, wm8988_reg,
+	       sizeof(wm8988_reg));
+
+	ret = wm8988_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		return ret;
+	}
+
+	/* set the update bits (we always update left then right) */
+	reg = wm8988_read_reg_cache(codec, WM8988_RADC);
+	wm8988_write(codec, WM8988_RADC, reg | 0x100);
+	reg = wm8988_read_reg_cache(codec, WM8988_RDAC);
+	wm8988_write(codec, WM8988_RDAC, reg | 0x0100);
+	reg = wm8988_read_reg_cache(codec, WM8988_ROUT1V);
+	wm8988_write(codec, WM8988_ROUT1V, reg | 0x0100);
+	reg = wm8988_read_reg_cache(codec, WM8988_ROUT2V);
+	wm8988_write(codec, WM8988_ROUT2V, reg | 0x0100);
+	reg = wm8988_read_reg_cache(codec, WM8988_RINVOL);
+	wm8988_write(codec, WM8988_RINVOL, reg | 0x0100);
+
+	wm8988_set_bias_level(&wm8988->codec, SND_SOC_BIAS_STANDBY);
+
+	wm8988_dai.dev = codec->dev;
+
+	wm8988_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm8988_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+
+err:
+	kfree(wm8988);
+	return ret;
+}
+
+static void wm8988_unregister(struct wm8988_priv *wm8988)
+{
+	wm8988_set_bias_level(&wm8988->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm8988_dai);
+	snd_soc_unregister_codec(&wm8988->codec);
+	kfree(wm8988);
+	wm8988_codec = NULL;
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static int wm8988_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct wm8988_priv *wm8988;
+	struct snd_soc_codec *codec;
+
+	wm8988 = kzalloc(sizeof(struct wm8988_priv), GFP_KERNEL);
+	if (wm8988 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8988->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+
+	i2c_set_clientdata(i2c, wm8988);
+	codec->control_data = i2c;
+
+	codec->dev = &i2c->dev;
+
+	return wm8988_register(wm8988);
+}
+
+static int wm8988_i2c_remove(struct i2c_client *client)
+{
+	struct wm8988_priv *wm8988 = i2c_get_clientdata(client);
+	wm8988_unregister(wm8988);
+	return 0;
+}
+
+static const struct i2c_device_id wm8988_i2c_id[] = {
+	{ "wm8988", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8988_i2c_id);
+
+static struct i2c_driver wm8988_i2c_driver = {
+	.driver = {
+		.name = "WM8988",
+		.owner = THIS_MODULE,
+	},
+	.probe = wm8988_i2c_probe,
+	.remove = wm8988_i2c_remove,
+	.id_table = wm8988_i2c_id,
+};
+#endif
+
+#if defined(CONFIG_SPI_MASTER)
+static int wm8988_spi_write(struct spi_device *spi, const char *data, int len)
+{
+	struct spi_transfer t;
+	struct spi_message m;
+	u8 msg[2];
+
+	if (len <= 0)
+		return 0;
+
+	msg[0] = data[0];
+	msg[1] = data[1];
+
+	spi_message_init(&m);
+	memset(&t, 0, (sizeof t));
+
+	t.tx_buf = &msg[0];
+	t.len = len;
+
+	spi_message_add_tail(&t, &m);
+	spi_sync(spi, &m);
+
+	return len;
+}
+
+static int __devinit wm8988_spi_probe(struct spi_device *spi)
+{
+	struct wm8988_priv *wm8988;
+	struct snd_soc_codec *codec;
+
+	wm8988 = kzalloc(sizeof(struct wm8988_priv), GFP_KERNEL);
+	if (wm8988 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8988->codec;
+	codec->hw_write = (hw_write_t)wm8988_spi_write;
+	codec->control_data = spi;
+	codec->dev = &spi->dev;
+
+	spi->dev.driver_data = wm8988;
+
+	return wm8988_register(wm8988);
+}
+
+static int __devexit wm8988_spi_remove(struct spi_device *spi)
+{
+	struct wm8988_priv *wm8988 = spi->dev.driver_data;
+
+	wm8988_unregister(wm8988);
+
+	return 0;
+}
+
+static struct spi_driver wm8988_spi_driver = {
+	.driver = {
+		.name	= "wm8988",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= wm8988_spi_probe,
+	.remove		= __devexit_p(wm8988_spi_remove),
+};
+#endif
+
+static int __init wm8988_modinit(void)
+{
+	int ret;
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	ret = i2c_add_driver(&wm8988_i2c_driver);
+	if (ret != 0)
+		pr_err("WM8988: Unable to register I2C driver: %d\n", ret);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	ret = spi_register_driver(&wm8988_spi_driver);
+	if (ret != 0)
+		pr_err("WM8988: Unable to register SPI driver: %d\n", ret);
+#endif
+	return ret;
+}
+module_init(wm8988_modinit);
+
+static void __exit wm8988_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_del_driver(&wm8988_i2c_driver);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	spi_unregister_driver(&wm8988_spi_driver);
+#endif
+}
+module_exit(wm8988_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM8988 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8988.h b/sound/soc/codecs/wm8988.h
new file mode 100644
index 0000000..4552d37
--- /dev/null
+++ b/sound/soc/codecs/wm8988.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <richard@openedhand.com>
+ *
+ * Based on WM8753.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _WM8988_H
+#define _WM8988_H
+
+/* WM8988 register space */
+
+#define WM8988_LINVOL    0x00
+#define WM8988_RINVOL    0x01
+#define WM8988_LOUT1V    0x02
+#define WM8988_ROUT1V    0x03
+#define WM8988_ADCDAC    0x05
+#define WM8988_IFACE     0x07
+#define WM8988_SRATE     0x08
+#define WM8988_LDAC      0x0a
+#define WM8988_RDAC      0x0b
+#define WM8988_BASS      0x0c
+#define WM8988_TREBLE    0x0d
+#define WM8988_RESET     0x0f
+#define WM8988_3D        0x10
+#define WM8988_ALC1      0x11
+#define WM8988_ALC2      0x12
+#define WM8988_ALC3      0x13
+#define WM8988_NGATE     0x14
+#define WM8988_LADC      0x15
+#define WM8988_RADC      0x16
+#define WM8988_ADCTL1    0x17
+#define WM8988_ADCTL2    0x18
+#define WM8988_PWR1      0x19
+#define WM8988_PWR2      0x1a
+#define WM8988_ADCTL3    0x1b
+#define WM8988_ADCIN     0x1f
+#define WM8988_LADCIN    0x20
+#define WM8988_RADCIN    0x21
+#define WM8988_LOUTM1    0x22
+#define WM8988_LOUTM2    0x23
+#define WM8988_ROUTM1    0x24
+#define WM8988_ROUTM2    0x25
+#define WM8988_LOUT2V    0x28
+#define WM8988_ROUT2V    0x29
+#define WM8988_LPPB      0x43
+#define WM8988_NUM_REG   0x44
+
+#define WM8988_SYSCLK	0
+
+extern struct snd_soc_dai wm8988_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8988;
+
+#endif
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index 40cd274..d029818 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -998,7 +998,7 @@
 
 	if ((Ndiv < 6) || (Ndiv > 12))
 		printk(KERN_WARNING
-		"WM8990 N value outwith recommended range! N = %d\n", Ndiv);
+		"WM8990 N value outwith recommended range! N = %u\n", Ndiv);
 
 	pll_div->n = Ndiv;
 	Nmod = target % source;
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
new file mode 100644
index 0000000..86fc57e
--- /dev/null
+++ b/sound/soc/codecs/wm9081.c
@@ -0,0 +1,1534 @@
+/*
+ * wm9081.c  --  WM9081 ALSA SoC Audio driver
+ *
+ * Author: Mark Brown
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include <sound/wm9081.h>
+#include "wm9081.h"
+
+static u16 wm9081_reg_defaults[] = {
+	0x0000,     /* R0  - Software Reset */
+	0x0000,     /* R1 */
+	0x00B9,     /* R2  - Analogue Lineout */
+	0x00B9,     /* R3  - Analogue Speaker PGA */
+	0x0001,     /* R4  - VMID Control */
+	0x0068,     /* R5  - Bias Control 1 */
+	0x0000,     /* R6 */
+	0x0000,     /* R7  - Analogue Mixer */
+	0x0000,     /* R8  - Anti Pop Control */
+	0x01DB,     /* R9  - Analogue Speaker 1 */
+	0x0018,     /* R10 - Analogue Speaker 2 */
+	0x0180,     /* R11 - Power Management */
+	0x0000,     /* R12 - Clock Control 1 */
+	0x0038,     /* R13 - Clock Control 2 */
+	0x4000,     /* R14 - Clock Control 3 */
+	0x0000,     /* R15 */
+	0x0000,     /* R16 - FLL Control 1 */
+	0x0200,     /* R17 - FLL Control 2 */
+	0x0000,     /* R18 - FLL Control 3 */
+	0x0204,     /* R19 - FLL Control 4 */
+	0x0000,     /* R20 - FLL Control 5 */
+	0x0000,     /* R21 */
+	0x0000,     /* R22 - Audio Interface 1 */
+	0x0002,     /* R23 - Audio Interface 2 */
+	0x0008,     /* R24 - Audio Interface 3 */
+	0x0022,     /* R25 - Audio Interface 4 */
+	0x0000,     /* R26 - Interrupt Status */
+	0x0006,     /* R27 - Interrupt Status Mask */
+	0x0000,     /* R28 - Interrupt Polarity */
+	0x0000,     /* R29 - Interrupt Control */
+	0x00C0,     /* R30 - DAC Digital 1 */
+	0x0008,     /* R31 - DAC Digital 2 */
+	0x09AF,     /* R32 - DRC 1 */
+	0x4201,     /* R33 - DRC 2 */
+	0x0000,     /* R34 - DRC 3 */
+	0x0000,     /* R35 - DRC 4 */
+	0x0000,     /* R36 */
+	0x0000,     /* R37 */
+	0x0000,     /* R38 - Write Sequencer 1 */
+	0x0000,     /* R39 - Write Sequencer 2 */
+	0x0002,     /* R40 - MW Slave 1 */
+	0x0000,     /* R41 */
+	0x0000,     /* R42 - EQ 1 */
+	0x0000,     /* R43 - EQ 2 */
+	0x0FCA,     /* R44 - EQ 3 */
+	0x0400,     /* R45 - EQ 4 */
+	0x00B8,     /* R46 - EQ 5 */
+	0x1EB5,     /* R47 - EQ 6 */
+	0xF145,     /* R48 - EQ 7 */
+	0x0B75,     /* R49 - EQ 8 */
+	0x01C5,     /* R50 - EQ 9 */
+	0x169E,     /* R51 - EQ 10 */
+	0xF829,     /* R52 - EQ 11 */
+	0x07AD,     /* R53 - EQ 12 */
+	0x1103,     /* R54 - EQ 13 */
+	0x1C58,     /* R55 - EQ 14 */
+	0xF373,     /* R56 - EQ 15 */
+	0x0A54,     /* R57 - EQ 16 */
+	0x0558,     /* R58 - EQ 17 */
+	0x0564,     /* R59 - EQ 18 */
+	0x0559,     /* R60 - EQ 19 */
+	0x4000,     /* R61 - EQ 20 */
+};
+
+static struct {
+	int ratio;
+	int clk_sys_rate;
+} clk_sys_rates[] = {
+	{ 64,   0 },
+	{ 128,  1 },
+	{ 192,  2 },
+	{ 256,  3 },
+	{ 384,  4 },
+	{ 512,  5 },
+	{ 768,  6 },
+	{ 1024, 7 },
+	{ 1408, 8 },
+	{ 1536, 9 },
+};
+
+static struct {
+	int rate;
+	int sample_rate;
+} sample_rates[] = {
+	{ 8000,  0  },
+	{ 11025, 1  },
+	{ 12000, 2  },
+	{ 16000, 3  },
+	{ 22050, 4  },
+	{ 24000, 5  },
+	{ 32000, 6  },
+	{ 44100, 7  },
+	{ 48000, 8  },
+	{ 88200, 9  },
+	{ 96000, 10 },
+};
+
+static struct {
+	int div; /* *10 due to .5s */
+	int bclk_div;
+} bclk_divs[] = {
+	{ 10,  0  },
+	{ 15,  1  },
+	{ 20,  2  },
+	{ 30,  3  },
+	{ 40,  4  },
+	{ 50,  5  },
+	{ 55,  6  },
+	{ 60,  7  },
+	{ 80,  8  },
+	{ 100, 9  },
+	{ 110, 10 },
+	{ 120, 11 },
+	{ 160, 12 },
+	{ 200, 13 },
+	{ 220, 14 },
+	{ 240, 15 },
+	{ 250, 16 },
+	{ 300, 17 },
+	{ 320, 18 },
+	{ 440, 19 },
+	{ 480, 20 },
+};
+
+struct wm9081_priv {
+	struct snd_soc_codec codec;
+	u16 reg_cache[WM9081_MAX_REGISTER + 1];
+	int sysclk_source;
+	int mclk_rate;
+	int sysclk_rate;
+	int fs;
+	int bclk;
+	int master;
+	int fll_fref;
+	int fll_fout;
+	struct wm9081_retune_mobile_config *retune;
+};
+
+static int wm9081_reg_is_volatile(int reg)
+{
+	switch (reg) {
+	default:
+		return 0;
+	}
+}
+
+static unsigned int wm9081_read_reg_cache(struct snd_soc_codec *codec,
+					  unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+	BUG_ON(reg > WM9081_MAX_REGISTER);
+	return cache[reg];
+}
+
+static unsigned int wm9081_read_hw(struct snd_soc_codec *codec, u8 reg)
+{
+	struct i2c_msg xfer[2];
+	u16 data;
+	int ret;
+	struct i2c_client *client = codec->control_data;
+
+	BUG_ON(reg > WM9081_MAX_REGISTER);
+
+	/* Write register */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = 0;
+	xfer[0].len = 1;
+	xfer[0].buf = &reg;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = 2;
+	xfer[1].buf = (u8 *)&data;
+
+	ret = i2c_transfer(client->adapter, xfer, 2);
+	if (ret != 2) {
+		dev_err(&client->dev, "i2c_transfer() returned %d\n", ret);
+		return 0;
+	}
+
+	return (data >> 8) | ((data & 0xff) << 8);
+}
+
+static unsigned int wm9081_read(struct snd_soc_codec *codec, unsigned int reg)
+{
+	if (wm9081_reg_is_volatile(reg))
+		return wm9081_read_hw(codec, reg);
+	else
+		return wm9081_read_reg_cache(codec, reg);
+}
+
+static int wm9081_write(struct snd_soc_codec *codec, unsigned int reg,
+			unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+	u8 data[3];
+
+	BUG_ON(reg > WM9081_MAX_REGISTER);
+
+	if (!wm9081_reg_is_volatile(reg))
+		cache[reg] = value;
+
+	data[0] = reg;
+	data[1] = value >> 8;
+	data[2] = value & 0x00ff;
+
+	if (codec->hw_write(codec->control_data, data, 3) == 3)
+		return 0;
+	else
+		return -EIO;
+}
+
+static int wm9081_reset(struct snd_soc_codec *codec)
+{
+	return wm9081_write(codec, WM9081_SOFTWARE_RESET, 0);
+}
+
+static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_out_tlv, -2250, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
+static unsigned int drc_max_tlv[] = {
+	TLV_DB_RANGE_HEAD(4),
+	0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0),
+	1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0),
+	2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0),
+	3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
+};
+static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
+static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -300, 50, 0);
+
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+
+static const DECLARE_TLV_DB_SCALE(in_tlv, -600, 600, 0);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
+
+static const char *drc_high_text[] = {
+	"1",
+	"1/2",
+	"1/4",
+	"1/8",
+	"1/16",
+	"0",
+};
+
+static const struct soc_enum drc_high =
+	SOC_ENUM_SINGLE(WM9081_DRC_3, 3, 6, drc_high_text);
+
+static const char *drc_low_text[] = {
+	"1",
+	"1/2",
+	"1/4",
+	"1/8",
+	"0",
+};
+
+static const struct soc_enum drc_low =
+	SOC_ENUM_SINGLE(WM9081_DRC_3, 0, 5, drc_low_text);
+
+static const char *drc_atk_text[] = {
+	"181us",
+	"181us",
+	"363us",
+	"726us",
+	"1.45ms",
+	"2.9ms",
+	"5.8ms",
+	"11.6ms",
+	"23.2ms",
+	"46.4ms",
+	"92.8ms",
+	"185.6ms",
+};
+
+static const struct soc_enum drc_atk =
+	SOC_ENUM_SINGLE(WM9081_DRC_2, 12, 12, drc_atk_text);
+
+static const char *drc_dcy_text[] = {
+	"186ms",
+	"372ms",
+	"743ms",
+	"1.49s",
+	"2.97s",
+	"5.94s",
+	"11.89s",
+	"23.78s",
+	"47.56s",
+};
+
+static const struct soc_enum drc_dcy =
+	SOC_ENUM_SINGLE(WM9081_DRC_2, 8, 9, drc_dcy_text);
+
+static const char *drc_qr_dcy_text[] = {
+	"0.725ms",
+	"1.45ms",
+	"5.8ms",
+};
+
+static const struct soc_enum drc_qr_dcy =
+	SOC_ENUM_SINGLE(WM9081_DRC_2, 4, 3, drc_qr_dcy_text);
+
+static const char *dac_deemph_text[] = {
+	"None",
+	"32kHz",
+	"44.1kHz",
+	"48kHz",
+};
+
+static const struct soc_enum dac_deemph =
+	SOC_ENUM_SINGLE(WM9081_DAC_DIGITAL_2, 1, 4, dac_deemph_text);
+
+static const char *speaker_mode_text[] = {
+	"Class D",
+	"Class AB",
+};
+
+static const struct soc_enum speaker_mode =
+	SOC_ENUM_SINGLE(WM9081_ANALOGUE_SPEAKER_2, 6, 2, speaker_mode_text);
+
+static int speaker_mode_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int reg;
+
+	reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2);
+	if (reg & WM9081_SPK_MODE)
+		ucontrol->value.integer.value[0] = 1;
+	else
+		ucontrol->value.integer.value[0] = 0;
+
+	return 0;
+}
+
+/*
+ * Stop any attempts to change speaker mode while the speaker is enabled.
+ *
+ * We also have some special anti-pop controls dependant on speaker
+ * mode which must be changed along with the mode.
+ */
+static int speaker_mode_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int reg_pwr = wm9081_read(codec, WM9081_POWER_MANAGEMENT);
+	unsigned int reg2 = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2);
+
+	/* Are we changing anything? */
+	if (ucontrol->value.integer.value[0] ==
+	    ((reg2 & WM9081_SPK_MODE) != 0))
+		return 0;
+
+	/* Don't try to change modes while enabled */
+	if (reg_pwr & WM9081_SPK_ENA)
+		return -EINVAL;
+
+	if (ucontrol->value.integer.value[0]) {
+		/* Class AB */
+		reg2 &= ~(WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL);
+		reg2 |= WM9081_SPK_MODE;
+	} else {
+		/* Class D */
+		reg2 |= WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL;
+		reg2 &= ~WM9081_SPK_MODE;
+	}
+
+	wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2);
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new wm9081_snd_controls[] = {
+SOC_SINGLE_TLV("IN1 Volume", WM9081_ANALOGUE_MIXER, 1, 1, 1, in_tlv),
+SOC_SINGLE_TLV("IN2 Volume", WM9081_ANALOGUE_MIXER, 3, 1, 1, in_tlv),
+
+SOC_SINGLE_TLV("Playback Volume", WM9081_DAC_DIGITAL_1, 1, 96, 0, dac_tlv),
+
+SOC_SINGLE("LINEOUT Switch", WM9081_ANALOGUE_LINEOUT, 7, 1, 1),
+SOC_SINGLE("LINEOUT ZC Switch", WM9081_ANALOGUE_LINEOUT, 6, 1, 0),
+SOC_SINGLE_TLV("LINEOUT Volume", WM9081_ANALOGUE_LINEOUT, 0, 63, 0, out_tlv),
+
+SOC_SINGLE("DRC Switch", WM9081_DRC_1, 15, 1, 0),
+SOC_ENUM("DRC High Slope", drc_high),
+SOC_ENUM("DRC Low Slope", drc_low),
+SOC_SINGLE_TLV("DRC Input Volume", WM9081_DRC_4, 5, 60, 1, drc_in_tlv),
+SOC_SINGLE_TLV("DRC Output Volume", WM9081_DRC_4, 0, 30, 1, drc_out_tlv),
+SOC_SINGLE_TLV("DRC Minimum Volume", WM9081_DRC_2, 2, 3, 1, drc_min_tlv),
+SOC_SINGLE_TLV("DRC Maximum Volume", WM9081_DRC_2, 0, 3, 0, drc_max_tlv),
+SOC_ENUM("DRC Attack", drc_atk),
+SOC_ENUM("DRC Decay", drc_dcy),
+SOC_SINGLE("DRC Quick Release Switch", WM9081_DRC_1, 2, 1, 0),
+SOC_SINGLE_TLV("DRC Quick Release Volume", WM9081_DRC_2, 6, 3, 0, drc_qr_tlv),
+SOC_ENUM("DRC Quick Release Decay", drc_qr_dcy),
+SOC_SINGLE_TLV("DRC Startup Volume", WM9081_DRC_1, 6, 18, 0, drc_startup_tlv),
+
+SOC_SINGLE("EQ Switch", WM9081_EQ_1, 0, 1, 0),
+
+SOC_SINGLE("Speaker DC Volume", WM9081_ANALOGUE_SPEAKER_1, 3, 5, 0),
+SOC_SINGLE("Speaker AC Volume", WM9081_ANALOGUE_SPEAKER_1, 0, 5, 0),
+SOC_SINGLE("Speaker Switch", WM9081_ANALOGUE_SPEAKER_PGA, 7, 1, 1),
+SOC_SINGLE("Speaker ZC Switch", WM9081_ANALOGUE_SPEAKER_PGA, 6, 1, 0),
+SOC_SINGLE_TLV("Speaker Volume", WM9081_ANALOGUE_SPEAKER_PGA, 0, 63, 0,
+	       out_tlv),
+SOC_ENUM("DAC Deemphasis", dac_deemph),
+SOC_ENUM_EXT("Speaker Mode", speaker_mode, speaker_mode_get, speaker_mode_put),
+};
+
+static const struct snd_kcontrol_new wm9081_eq_controls[] = {
+SOC_SINGLE_TLV("EQ1 Volume", WM9081_EQ_1, 11, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Volume", WM9081_EQ_1, 6, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Volume", WM9081_EQ_1, 1, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Volume", WM9081_EQ_2, 11, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ5 Volume", WM9081_EQ_2, 6, 24, 0, eq_tlv),
+};
+
+static const struct snd_kcontrol_new mixer[] = {
+SOC_DAPM_SINGLE("IN1 Switch", WM9081_ANALOGUE_MIXER, 0, 1, 0),
+SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0),
+SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0),
+};
+
+static int speaker_event(struct snd_soc_dapm_widget *w,
+			 struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	unsigned int reg = wm9081_read(codec, WM9081_POWER_MANAGEMENT);
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		reg |= WM9081_SPK_ENA;
+		break;
+
+	case SND_SOC_DAPM_PRE_PMD:
+		reg &= ~WM9081_SPK_ENA;
+		break;
+	}
+
+	wm9081_write(codec, WM9081_POWER_MANAGEMENT, reg);
+
+	return 0;
+}
+
+struct _fll_div {
+	u16 fll_fratio;
+	u16 fll_outdiv;
+	u16 fll_clk_ref_div;
+	u16 n;
+	u16 k;
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 16) * 10)
+
+static struct {
+	unsigned int min;
+	unsigned int max;
+	u16 fll_fratio;
+	int ratio;
+} fll_fratios[] = {
+	{       0,    64000, 4, 16 },
+	{   64000,   128000, 3,  8 },
+	{  128000,   256000, 2,  4 },
+	{  256000,  1000000, 1,  2 },
+	{ 1000000, 13500000, 0,  1 },
+};
+
+static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
+		       unsigned int Fout)
+{
+	u64 Kpart;
+	unsigned int K, Ndiv, Nmod, target;
+	unsigned int div;
+	int i;
+
+	/* Fref must be <=13.5MHz */
+	div = 1;
+	while ((Fref / div) > 13500000) {
+		div *= 2;
+
+		if (div > 8) {
+			pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
+			       Fref);
+			return -EINVAL;
+		}
+	}
+	fll_div->fll_clk_ref_div = div / 2;
+
+	pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
+
+	/* Apply the division for our remaining calculations */
+	Fref /= div;
+
+	/* Fvco should be 90-100MHz; don't check the upper bound */
+	div = 0;
+	target = Fout * 2;
+	while (target < 90000000) {
+		div++;
+		target *= 2;
+		if (div > 7) {
+			pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
+			       Fout);
+			return -EINVAL;
+		}
+	}
+	fll_div->fll_outdiv = div;
+
+	pr_debug("Fvco=%dHz\n", target);
+
+	/* Find an appropraite FLL_FRATIO and factor it out of the target */
+	for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
+		if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
+			fll_div->fll_fratio = fll_fratios[i].fll_fratio;
+			target /= fll_fratios[i].ratio;
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(fll_fratios)) {
+		pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
+		return -EINVAL;
+	}
+
+	/* Now, calculate N.K */
+	Ndiv = target / Fref;
+
+	fll_div->n = Ndiv;
+	Nmod = target % Fref;
+	pr_debug("Nmod=%d\n", Nmod);
+
+	/* Calculate fractional part - scale up so we can round. */
+	Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+	do_div(Kpart, Fref);
+
+	K = Kpart & 0xFFFFFFFF;
+
+	if ((K % 10) >= 5)
+		K += 5;
+
+	/* Move down to proper range now rounding is done */
+	fll_div->k = K / 10;
+
+	pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
+		 fll_div->n, fll_div->k,
+		 fll_div->fll_fratio, fll_div->fll_outdiv,
+		 fll_div->fll_clk_ref_div);
+
+	return 0;
+}
+
+static int wm9081_set_fll(struct snd_soc_codec *codec, int fll_id,
+			  unsigned int Fref, unsigned int Fout)
+{
+	struct wm9081_priv *wm9081 = codec->private_data;
+	u16 reg1, reg4, reg5;
+	struct _fll_div fll_div;
+	int ret;
+	int clk_sys_reg;
+
+	/* Any change? */
+	if (Fref == wm9081->fll_fref && Fout == wm9081->fll_fout)
+		return 0;
+
+	/* Disable the FLL */
+	if (Fout == 0) {
+		dev_dbg(codec->dev, "FLL disabled\n");
+		wm9081->fll_fref = 0;
+		wm9081->fll_fout = 0;
+
+		return 0;
+	}
+
+	ret = fll_factors(&fll_div, Fref, Fout);
+	if (ret != 0)
+		return ret;
+
+	reg5 = wm9081_read(codec, WM9081_FLL_CONTROL_5);
+	reg5 &= ~WM9081_FLL_CLK_SRC_MASK;
+
+	switch (fll_id) {
+	case WM9081_SYSCLK_FLL_MCLK:
+		reg5 |= 0x1;
+		break;
+
+	default:
+		dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
+		return -EINVAL;
+	}
+
+	/* Disable CLK_SYS while we reconfigure */
+	clk_sys_reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3);
+	if (clk_sys_reg & WM9081_CLK_SYS_ENA)
+		wm9081_write(codec, WM9081_CLOCK_CONTROL_3,
+			     clk_sys_reg & ~WM9081_CLK_SYS_ENA);
+
+	/* Any FLL configuration change requires that the FLL be
+	 * disabled first. */
+	reg1 = wm9081_read(codec, WM9081_FLL_CONTROL_1);
+	reg1 &= ~WM9081_FLL_ENA;
+	wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1);
+
+	/* Apply the configuration */
+	if (fll_div.k)
+		reg1 |= WM9081_FLL_FRAC_MASK;
+	else
+		reg1 &= ~WM9081_FLL_FRAC_MASK;
+	wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1);
+
+	wm9081_write(codec, WM9081_FLL_CONTROL_2,
+		     (fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) |
+		     (fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT));
+	wm9081_write(codec, WM9081_FLL_CONTROL_3, fll_div.k);
+
+	reg4 = wm9081_read(codec, WM9081_FLL_CONTROL_4);
+	reg4 &= ~WM9081_FLL_N_MASK;
+	reg4 |= fll_div.n << WM9081_FLL_N_SHIFT;
+	wm9081_write(codec, WM9081_FLL_CONTROL_4, reg4);
+
+	reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK;
+	reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT;
+	wm9081_write(codec, WM9081_FLL_CONTROL_5, reg5);
+
+	/* Enable the FLL */
+	wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA);
+
+	/* Then bring CLK_SYS up again if it was disabled */
+	if (clk_sys_reg & WM9081_CLK_SYS_ENA)
+		wm9081_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg);
+
+	dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
+
+	wm9081->fll_fref = Fref;
+	wm9081->fll_fout = Fout;
+
+	return 0;
+}
+
+static int configure_clock(struct snd_soc_codec *codec)
+{
+	struct wm9081_priv *wm9081 = codec->private_data;
+	int new_sysclk, i, target;
+	unsigned int reg;
+	int ret = 0;
+	int mclkdiv = 0;
+	int fll = 0;
+
+	switch (wm9081->sysclk_source) {
+	case WM9081_SYSCLK_MCLK:
+		if (wm9081->mclk_rate > 12225000) {
+			mclkdiv = 1;
+			wm9081->sysclk_rate = wm9081->mclk_rate / 2;
+		} else {
+			wm9081->sysclk_rate = wm9081->mclk_rate;
+		}
+		wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 0, 0);
+		break;
+
+	case WM9081_SYSCLK_FLL_MCLK:
+		/* If we have a sample rate calculate a CLK_SYS that
+		 * gives us a suitable DAC configuration, plus BCLK.
+		 * Ideally we would check to see if we can clock
+		 * directly from MCLK and only use the FLL if this is
+		 * not the case, though care must be taken with free
+		 * running mode.
+		 */
+		if (wm9081->master && wm9081->bclk) {
+			/* Make sure we can generate CLK_SYS and BCLK
+			 * and that we've got 3MHz for optimal
+			 * performance. */
+			for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
+				target = wm9081->fs * clk_sys_rates[i].ratio;
+				new_sysclk = target;
+				if (target >= wm9081->bclk &&
+				    target > 3000000)
+					break;
+			}
+		} else if (wm9081->fs) {
+			for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
+				new_sysclk = clk_sys_rates[i].ratio
+					* wm9081->fs;
+				if (new_sysclk > 3000000)
+					break;
+			}
+		} else {
+			new_sysclk = 12288000;
+		}
+
+		ret = wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK,
+				     wm9081->mclk_rate, new_sysclk);
+		if (ret == 0) {
+			wm9081->sysclk_rate = new_sysclk;
+
+			/* Switch SYSCLK over to FLL */
+			fll = 1;
+		} else {
+			wm9081->sysclk_rate = wm9081->mclk_rate;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_1);
+	if (mclkdiv)
+		reg |= WM9081_MCLKDIV2;
+	else
+		reg &= ~WM9081_MCLKDIV2;
+	wm9081_write(codec, WM9081_CLOCK_CONTROL_1, reg);
+
+	reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3);
+	if (fll)
+		reg |= WM9081_CLK_SRC_SEL;
+	else
+		reg &= ~WM9081_CLK_SRC_SEL;
+	wm9081_write(codec, WM9081_CLOCK_CONTROL_3, reg);
+
+	dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate);
+
+	return ret;
+}
+
+static int clk_sys_event(struct snd_soc_dapm_widget *w,
+			 struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	struct wm9081_priv *wm9081 = codec->private_data;
+
+	/* This should be done on init() for bypass paths */
+	switch (wm9081->sysclk_source) {
+	case WM9081_SYSCLK_MCLK:
+		dev_dbg(codec->dev, "Using %dHz MCLK\n", wm9081->mclk_rate);
+		break;
+	case WM9081_SYSCLK_FLL_MCLK:
+		dev_dbg(codec->dev, "Using %dHz MCLK with FLL\n",
+			wm9081->mclk_rate);
+		break;
+	default:
+		dev_err(codec->dev, "System clock not configured\n");
+		return -EINVAL;
+	}
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		configure_clock(codec);
+		break;
+
+	case SND_SOC_DAPM_POST_PMD:
+		/* Disable the FLL if it's running */
+		wm9081_set_fll(codec, 0, 0, 0);
+		break;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget wm9081_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("IN1"),
+SND_SOC_DAPM_INPUT("IN2"),
+
+SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM9081_POWER_MANAGEMENT, 0, 0),
+
+SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0,
+			     mixer, ARRAY_SIZE(mixer)),
+
+SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA_E("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0,
+		   speaker_event,
+		   SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+SND_SOC_DAPM_OUTPUT("LINEOUT"),
+SND_SOC_DAPM_OUTPUT("SPKN"),
+SND_SOC_DAPM_OUTPUT("SPKP"),
+
+SND_SOC_DAPM_SUPPLY("CLK_SYS", WM9081_CLOCK_CONTROL_3, 0, 0, clk_sys_event,
+		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM9081_CLOCK_CONTROL_3, 1, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0),
+};
+
+
+static const struct snd_soc_dapm_route audio_paths[] = {
+	{ "DAC", NULL, "CLK_SYS" },
+	{ "DAC", NULL, "CLK_DSP" },
+
+	{ "Mixer", "IN1 Switch", "IN1" },
+	{ "Mixer", "IN2 Switch", "IN2" },
+	{ "Mixer", "Playback Switch", "DAC" },
+
+	{ "LINEOUT PGA", NULL, "Mixer" },
+	{ "LINEOUT PGA", NULL, "TOCLK" },
+	{ "LINEOUT PGA", NULL, "CLK_SYS" },
+
+	{ "LINEOUT", NULL, "LINEOUT PGA" },
+
+	{ "Speaker PGA", NULL, "Mixer" },
+	{ "Speaker PGA", NULL, "TOCLK" },
+	{ "Speaker PGA", NULL, "CLK_SYS" },
+
+	{ "SPKN", NULL, "Speaker PGA" },
+	{ "SPKP", NULL, "Speaker PGA" },
+};
+
+static int wm9081_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	u16 reg;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+
+	case SND_SOC_BIAS_PREPARE:
+		/* VMID=2*40k */
+		reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+		reg &= ~WM9081_VMID_SEL_MASK;
+		reg |= 0x2;
+		wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+		/* Normal bias current */
+		reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+		reg &= ~WM9081_STBY_BIAS_ENA;
+		wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		/* Initial cold start */
+		if (codec->bias_level == SND_SOC_BIAS_OFF) {
+			/* Disable LINEOUT discharge */
+			reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL);
+			reg &= ~WM9081_LINEOUT_DISCH;
+			wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+
+			/* Select startup bias source */
+			reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+			reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
+			wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+
+			/* VMID 2*4k; Soft VMID ramp enable */
+			reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+			reg |= WM9081_VMID_RAMP | 0x6;
+			wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+			mdelay(100);
+
+			/* Normal bias enable & soft start off */
+			reg |= WM9081_BIAS_ENA;
+			reg &= ~WM9081_VMID_RAMP;
+			wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+			/* Standard bias source */
+			reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+			reg &= ~WM9081_BIAS_SRC;
+			wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+		}
+
+		/* VMID 2*240k */
+		reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+		reg &= ~WM9081_VMID_SEL_MASK;
+		reg |= 0x40;
+		wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+		/* Standby bias current on */
+		reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+		reg |= WM9081_STBY_BIAS_ENA;
+		wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		/* Startup bias source */
+		reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+		reg |= WM9081_BIAS_SRC;
+		wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+
+		/* Disable VMID and biases with soft ramping */
+		reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+		reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
+		reg |= WM9081_VMID_RAMP;
+		wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+		/* Actively discharge LINEOUT */
+		reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL);
+		reg |= WM9081_LINEOUT_DISCH;
+		wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+		break;
+	}
+
+	codec->bias_level = level;
+
+	return 0;
+}
+
+static int wm9081_set_dai_fmt(struct snd_soc_dai *dai,
+			      unsigned int fmt)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm9081_priv *wm9081 = codec->private_data;
+	unsigned int aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2);
+
+	aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV |
+		  WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		wm9081->master = 0;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+		aif2 |= WM9081_LRCLK_DIR;
+		wm9081->master = 1;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		aif2 |= WM9081_BCLK_DIR;
+		wm9081->master = 1;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		aif2 |= WM9081_LRCLK_DIR | WM9081_BCLK_DIR;
+		wm9081->master = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_B:
+		aif2 |= WM9081_AIF_LRCLK_INV;
+	case SND_SOC_DAIFMT_DSP_A:
+		aif2 |= 0x3;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		aif2 |= 0x2;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		aif2 |= 0x1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		/* frame inversion not valid for DSP modes */
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif2 |= WM9081_AIF_BCLK_INV;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_RIGHT_J:
+	case SND_SOC_DAIFMT_LEFT_J:
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_IF:
+			aif2 |= WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif2 |= WM9081_AIF_BCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_NB_IF:
+			aif2 |= WM9081_AIF_LRCLK_INV;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
+
+	return 0;
+}
+
+static int wm9081_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params,
+			    struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm9081_priv *wm9081 = codec->private_data;
+	int ret, i, best, best_val, cur_val;
+	unsigned int clk_ctrl2, aif1, aif2, aif3, aif4;
+
+	clk_ctrl2 = wm9081_read(codec, WM9081_CLOCK_CONTROL_2);
+	clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK);
+
+	aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1);
+
+	aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2);
+	aif2 &= ~WM9081_AIF_WL_MASK;
+
+	aif3 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_3);
+	aif3 &= ~WM9081_BCLK_DIV_MASK;
+
+	aif4 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_4);
+	aif4 &= ~WM9081_LRCLK_RATE_MASK;
+
+	/* What BCLK do we need? */
+	wm9081->fs = params_rate(params);
+	wm9081->bclk = 2 * wm9081->fs;
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		wm9081->bclk *= 16;
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		wm9081->bclk *= 20;
+		aif2 |= 0x4;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		wm9081->bclk *= 24;
+		aif2 |= 0x8;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		wm9081->bclk *= 32;
+		aif2 |= 0xc;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (aif1 & WM9081_AIFDAC_TDM_MODE_MASK) {
+		int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >>
+			     WM9081_AIFDAC_TDM_MODE_SHIFT) + 1;
+		wm9081->bclk *= slots;
+	}
+
+	dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk);
+
+	ret = configure_clock(codec);
+	if (ret != 0)
+		return ret;
+
+	/* Select nearest CLK_SYS_RATE */
+	best = 0;
+	best_val = abs((wm9081->sysclk_rate / clk_sys_rates[0].ratio)
+		       - wm9081->fs);
+	for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
+		cur_val = abs((wm9081->sysclk_rate /
+			       clk_sys_rates[i].ratio) - wm9081->fs);;
+		if (cur_val < best_val) {
+			best = i;
+			best_val = cur_val;
+		}
+	}
+	dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
+		clk_sys_rates[best].ratio);
+	clk_ctrl2 |= (clk_sys_rates[best].clk_sys_rate
+		      << WM9081_CLK_SYS_RATE_SHIFT);
+
+	/* SAMPLE_RATE */
+	best = 0;
+	best_val = abs(wm9081->fs - sample_rates[0].rate);
+	for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
+		/* Closest match */
+		cur_val = abs(wm9081->fs - sample_rates[i].rate);
+		if (cur_val < best_val) {
+			best = i;
+			best_val = cur_val;
+		}
+	}
+	dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
+		sample_rates[best].rate);
+	clk_ctrl2 |= (sample_rates[best].sample_rate
+			<< WM9081_SAMPLE_RATE_SHIFT);
+
+	/* BCLK_DIV */
+	best = 0;
+	best_val = INT_MAX;
+	for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+		cur_val = ((wm9081->sysclk_rate * 10) / bclk_divs[i].div)
+			- wm9081->bclk;
+		if (cur_val < 0) /* Table is sorted */
+			break;
+		if (cur_val < best_val) {
+			best = i;
+			best_val = cur_val;
+		}
+	}
+	wm9081->bclk = (wm9081->sysclk_rate * 10) / bclk_divs[best].div;
+	dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
+		bclk_divs[best].div, wm9081->bclk);
+	aif3 |= bclk_divs[best].bclk_div;
+
+	/* LRCLK is a simple fraction of BCLK */
+	dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm9081->bclk / wm9081->fs);
+	aif4 |= wm9081->bclk / wm9081->fs;
+
+	/* Apply a ReTune Mobile configuration if it's in use */
+	if (wm9081->retune) {
+		struct wm9081_retune_mobile_config *retune = wm9081->retune;
+		struct wm9081_retune_mobile_setting *s;
+		int eq1;
+
+		best = 0;
+		best_val = abs(retune->configs[0].rate - wm9081->fs);
+		for (i = 0; i < retune->num_configs; i++) {
+			cur_val = abs(retune->configs[i].rate - wm9081->fs);
+			if (cur_val < best_val) {
+				best_val = cur_val;
+				best = i;
+			}
+		}
+		s = &retune->configs[best];
+
+		dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
+			s->name, s->rate);
+
+		/* If the EQ is enabled then disable it while we write out */
+		eq1 = wm9081_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA;
+		if (eq1 & WM9081_EQ_ENA)
+			wm9081_write(codec, WM9081_EQ_1, 0);
+
+		/* Write out the other values */
+		for (i = 1; i < ARRAY_SIZE(s->config); i++)
+			wm9081_write(codec, WM9081_EQ_1 + i, s->config[i]);
+
+		eq1 |= (s->config[0] & ~WM9081_EQ_ENA);
+		wm9081_write(codec, WM9081_EQ_1, eq1);
+	}
+
+	wm9081_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2);
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_3, aif3);
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_4, aif4);
+
+	return 0;
+}
+
+static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	unsigned int reg;
+
+	reg = wm9081_read(codec, WM9081_DAC_DIGITAL_2);
+
+	if (mute)
+		reg |= WM9081_DAC_MUTE;
+	else
+		reg &= ~WM9081_DAC_MUTE;
+
+	wm9081_write(codec, WM9081_DAC_DIGITAL_2, reg);
+
+	return 0;
+}
+
+static int wm9081_set_sysclk(struct snd_soc_dai *codec_dai,
+			     int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm9081_priv *wm9081 = codec->private_data;
+
+	switch (clk_id) {
+	case WM9081_SYSCLK_MCLK:
+	case WM9081_SYSCLK_FLL_MCLK:
+		wm9081->sysclk_source = clk_id;
+		wm9081->mclk_rate = freq;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wm9081_set_tdm_slot(struct snd_soc_dai *dai,
+			       unsigned int mask, int slots)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	unsigned int aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1);
+
+	aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK);
+
+	if (slots < 1 || slots > 4)
+		return -EINVAL;
+
+	aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT;
+
+	switch (mask) {
+	case 1:
+		break;
+	case 2:
+		aif1 |= 0x10;
+		break;
+	case 4:
+		aif1 |= 0x20;
+		break;
+	case 8:
+		aif1 |= 0x30;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_1, aif1);
+
+	return 0;
+}
+
+#define WM9081_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM9081_FORMATS \
+	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+	 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm9081_dai_ops = {
+	.hw_params = wm9081_hw_params,
+	.set_sysclk = wm9081_set_sysclk,
+	.set_fmt = wm9081_set_dai_fmt,
+	.digital_mute = wm9081_digital_mute,
+	.set_tdm_slot = wm9081_set_tdm_slot,
+};
+
+/* We report two channels because the CODEC processes a stereo signal, even
+ * though it is only capable of handling a mono output.
+ */
+struct snd_soc_dai wm9081_dai = {
+	.name = "WM9081",
+	.playback = {
+		.stream_name = "HiFi Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM9081_RATES,
+		.formats = WM9081_FORMATS,
+	},
+	.ops = &wm9081_dai_ops,
+};
+EXPORT_SYMBOL_GPL(wm9081_dai);
+
+
+static struct snd_soc_codec *wm9081_codec;
+
+static int wm9081_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	struct wm9081_priv *wm9081;
+	int ret = 0;
+
+	if (wm9081_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm9081_codec;
+	codec = wm9081_codec;
+	wm9081 = codec->private_data;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, wm9081_snd_controls,
+			     ARRAY_SIZE(wm9081_snd_controls));
+	if (!wm9081->retune) {
+		dev_dbg(codec->dev,
+			"No ReTune Mobile data, using normal EQ\n");
+		snd_soc_add_controls(codec, wm9081_eq_controls,
+				     ARRAY_SIZE(wm9081_eq_controls));
+	}
+
+	snd_soc_dapm_new_controls(codec, wm9081_dapm_widgets,
+				  ARRAY_SIZE(wm9081_dapm_widgets));
+	snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
+	snd_soc_dapm_new_widgets(codec);
+
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to register card: %d\n", ret);
+		goto card_err;
+	}
+
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	return ret;
+}
+
+static int wm9081_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm9081_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	return 0;
+}
+
+static int wm9081_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 *reg_cache = codec->reg_cache;
+	int i;
+
+	for (i = 0; i < codec->reg_cache_size; i++) {
+		if (i == WM9081_SOFTWARE_RESET)
+			continue;
+
+		wm9081_write(codec, i, reg_cache[i]);
+	}
+
+	wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	return 0;
+}
+#else
+#define wm9081_suspend NULL
+#define wm9081_resume NULL
+#endif
+
+struct snd_soc_codec_device soc_codec_dev_wm9081 = {
+	.probe = 	wm9081_probe,
+	.remove = 	wm9081_remove,
+	.suspend =	wm9081_suspend,
+	.resume =	wm9081_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm9081);
+
+static int wm9081_register(struct wm9081_priv *wm9081)
+{
+	struct snd_soc_codec *codec = &wm9081->codec;
+	int ret;
+	u16 reg;
+
+	if (wm9081_codec) {
+		dev_err(codec->dev, "Another WM9081 is registered\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm9081;
+	codec->name = "WM9081";
+	codec->owner = THIS_MODULE;
+	codec->read = wm9081_read;
+	codec->write = wm9081_write;
+	codec->dai = &wm9081_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = ARRAY_SIZE(wm9081->reg_cache);
+	codec->reg_cache = &wm9081->reg_cache;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm9081_set_bias_level;
+
+	memcpy(codec->reg_cache, wm9081_reg_defaults,
+	       sizeof(wm9081_reg_defaults));
+
+	reg = wm9081_read_hw(codec, WM9081_SOFTWARE_RESET);
+	if (reg != 0x9081) {
+		dev_err(codec->dev, "Device is not a WM9081: ID=0x%x\n", reg);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = wm9081_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		return ret;
+	}
+
+	wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	/* Enable zero cross by default */
+	reg = wm9081_read(codec, WM9081_ANALOGUE_LINEOUT);
+	wm9081_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
+	reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
+	wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
+		     reg | WM9081_SPKPGAZC);
+
+	wm9081_dai.dev = codec->dev;
+
+	wm9081_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm9081_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+
+err:
+	kfree(wm9081);
+	return ret;
+}
+
+static void wm9081_unregister(struct wm9081_priv *wm9081)
+{
+	wm9081_set_bias_level(&wm9081->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm9081_dai);
+	snd_soc_unregister_codec(&wm9081->codec);
+	kfree(wm9081);
+	wm9081_codec = NULL;
+}
+
+static __devinit int wm9081_i2c_probe(struct i2c_client *i2c,
+				      const struct i2c_device_id *id)
+{
+	struct wm9081_priv *wm9081;
+	struct snd_soc_codec *codec;
+
+	wm9081 = kzalloc(sizeof(struct wm9081_priv), GFP_KERNEL);
+	if (wm9081 == NULL)
+		return -ENOMEM;
+
+	codec = &wm9081->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+	wm9081->retune = i2c->dev.platform_data;
+
+	i2c_set_clientdata(i2c, wm9081);
+	codec->control_data = i2c;
+
+	codec->dev = &i2c->dev;
+
+	return wm9081_register(wm9081);
+}
+
+static __devexit int wm9081_i2c_remove(struct i2c_client *client)
+{
+	struct wm9081_priv *wm9081 = i2c_get_clientdata(client);
+	wm9081_unregister(wm9081);
+	return 0;
+}
+
+static const struct i2c_device_id wm9081_i2c_id[] = {
+	{ "wm9081", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm9081_i2c_id);
+
+static struct i2c_driver wm9081_i2c_driver = {
+	.driver = {
+		.name = "wm9081",
+		.owner = THIS_MODULE,
+	},
+	.probe =    wm9081_i2c_probe,
+	.remove =   __devexit_p(wm9081_i2c_remove),
+	.id_table = wm9081_i2c_id,
+};
+
+static int __init wm9081_modinit(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&wm9081_i2c_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register WM9081 I2C driver: %d\n",
+		       ret);
+	}
+
+	return ret;
+}
+module_init(wm9081_modinit);
+
+static void __exit wm9081_exit(void)
+{
+	i2c_del_driver(&wm9081_i2c_driver);
+}
+module_exit(wm9081_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM9081 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm9081.h b/sound/soc/codecs/wm9081.h
new file mode 100644
index 0000000..42d3bc7
--- /dev/null
+++ b/sound/soc/codecs/wm9081.h
@@ -0,0 +1,787 @@
+#ifndef WM9081_H
+#define WM9081_H
+
+/*
+ * wm9081.c  --  WM9081 ALSA SoC Audio driver
+ *
+ * Author: Mark Brown
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <sound/soc.h>
+
+extern struct snd_soc_dai wm9081_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm9081;
+
+/*
+ * SYSCLK sources
+ */
+#define WM9081_SYSCLK_MCLK      1   /* Use MCLK without FLL */
+#define WM9081_SYSCLK_FLL_MCLK  2   /* Use MCLK, enabling FLL if required */
+
+/*
+ * Register values.
+ */
+#define WM9081_SOFTWARE_RESET                   0x00
+#define WM9081_ANALOGUE_LINEOUT                 0x02
+#define WM9081_ANALOGUE_SPEAKER_PGA             0x03
+#define WM9081_VMID_CONTROL                     0x04
+#define WM9081_BIAS_CONTROL_1                   0x05
+#define WM9081_ANALOGUE_MIXER                   0x07
+#define WM9081_ANTI_POP_CONTROL                 0x08
+#define WM9081_ANALOGUE_SPEAKER_1               0x09
+#define WM9081_ANALOGUE_SPEAKER_2               0x0A
+#define WM9081_POWER_MANAGEMENT                 0x0B
+#define WM9081_CLOCK_CONTROL_1                  0x0C
+#define WM9081_CLOCK_CONTROL_2                  0x0D
+#define WM9081_CLOCK_CONTROL_3                  0x0E
+#define WM9081_FLL_CONTROL_1                    0x10
+#define WM9081_FLL_CONTROL_2                    0x11
+#define WM9081_FLL_CONTROL_3                    0x12
+#define WM9081_FLL_CONTROL_4                    0x13
+#define WM9081_FLL_CONTROL_5                    0x14
+#define WM9081_AUDIO_INTERFACE_1                0x16
+#define WM9081_AUDIO_INTERFACE_2                0x17
+#define WM9081_AUDIO_INTERFACE_3                0x18
+#define WM9081_AUDIO_INTERFACE_4                0x19
+#define WM9081_INTERRUPT_STATUS                 0x1A
+#define WM9081_INTERRUPT_STATUS_MASK            0x1B
+#define WM9081_INTERRUPT_POLARITY               0x1C
+#define WM9081_INTERRUPT_CONTROL                0x1D
+#define WM9081_DAC_DIGITAL_1                    0x1E
+#define WM9081_DAC_DIGITAL_2                    0x1F
+#define WM9081_DRC_1                            0x20
+#define WM9081_DRC_2                            0x21
+#define WM9081_DRC_3                            0x22
+#define WM9081_DRC_4                            0x23
+#define WM9081_WRITE_SEQUENCER_1                0x26
+#define WM9081_WRITE_SEQUENCER_2                0x27
+#define WM9081_MW_SLAVE_1                       0x28
+#define WM9081_EQ_1                             0x2A
+#define WM9081_EQ_2                             0x2B
+#define WM9081_EQ_3                             0x2C
+#define WM9081_EQ_4                             0x2D
+#define WM9081_EQ_5                             0x2E
+#define WM9081_EQ_6                             0x2F
+#define WM9081_EQ_7                             0x30
+#define WM9081_EQ_8                             0x31
+#define WM9081_EQ_9                             0x32
+#define WM9081_EQ_10                            0x33
+#define WM9081_EQ_11                            0x34
+#define WM9081_EQ_12                            0x35
+#define WM9081_EQ_13                            0x36
+#define WM9081_EQ_14                            0x37
+#define WM9081_EQ_15                            0x38
+#define WM9081_EQ_16                            0x39
+#define WM9081_EQ_17                            0x3A
+#define WM9081_EQ_18                            0x3B
+#define WM9081_EQ_19                            0x3C
+#define WM9081_EQ_20                            0x3D
+
+#define WM9081_REGISTER_COUNT                   55
+#define WM9081_MAX_REGISTER                     0x3D
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Software Reset
+ */
+#define WM9081_SW_RST_DEV_ID1_MASK              0xFFFF  /* SW_RST_DEV_ID1 - [15:0] */
+#define WM9081_SW_RST_DEV_ID1_SHIFT                  0  /* SW_RST_DEV_ID1 - [15:0] */
+#define WM9081_SW_RST_DEV_ID1_WIDTH                 16  /* SW_RST_DEV_ID1 - [15:0] */
+
+/*
+ * R2 (0x02) - Analogue Lineout
+ */
+#define WM9081_LINEOUT_MUTE                     0x0080  /* LINEOUT_MUTE */
+#define WM9081_LINEOUT_MUTE_MASK                0x0080  /* LINEOUT_MUTE */
+#define WM9081_LINEOUT_MUTE_SHIFT                    7  /* LINEOUT_MUTE */
+#define WM9081_LINEOUT_MUTE_WIDTH                    1  /* LINEOUT_MUTE */
+#define WM9081_LINEOUTZC                        0x0040  /* LINEOUTZC */
+#define WM9081_LINEOUTZC_MASK                   0x0040  /* LINEOUTZC */
+#define WM9081_LINEOUTZC_SHIFT                       6  /* LINEOUTZC */
+#define WM9081_LINEOUTZC_WIDTH                       1  /* LINEOUTZC */
+#define WM9081_LINEOUT_VOL_MASK                 0x003F  /* LINEOUT_VOL - [5:0] */
+#define WM9081_LINEOUT_VOL_SHIFT                     0  /* LINEOUT_VOL - [5:0] */
+#define WM9081_LINEOUT_VOL_WIDTH                     6  /* LINEOUT_VOL - [5:0] */
+
+/*
+ * R3 (0x03) - Analogue Speaker PGA
+ */
+#define WM9081_SPKPGA_MUTE                      0x0080  /* SPKPGA_MUTE */
+#define WM9081_SPKPGA_MUTE_MASK                 0x0080  /* SPKPGA_MUTE */
+#define WM9081_SPKPGA_MUTE_SHIFT                     7  /* SPKPGA_MUTE */
+#define WM9081_SPKPGA_MUTE_WIDTH                     1  /* SPKPGA_MUTE */
+#define WM9081_SPKPGAZC                         0x0040  /* SPKPGAZC */
+#define WM9081_SPKPGAZC_MASK                    0x0040  /* SPKPGAZC */
+#define WM9081_SPKPGAZC_SHIFT                        6  /* SPKPGAZC */
+#define WM9081_SPKPGAZC_WIDTH                        1  /* SPKPGAZC */
+#define WM9081_SPKPGA_VOL_MASK                  0x003F  /* SPKPGA_VOL - [5:0] */
+#define WM9081_SPKPGA_VOL_SHIFT                      0  /* SPKPGA_VOL - [5:0] */
+#define WM9081_SPKPGA_VOL_WIDTH                      6  /* SPKPGA_VOL - [5:0] */
+
+/*
+ * R4 (0x04) - VMID Control
+ */
+#define WM9081_VMID_BUF_ENA                     0x0020  /* VMID_BUF_ENA */
+#define WM9081_VMID_BUF_ENA_MASK                0x0020  /* VMID_BUF_ENA */
+#define WM9081_VMID_BUF_ENA_SHIFT                    5  /* VMID_BUF_ENA */
+#define WM9081_VMID_BUF_ENA_WIDTH                    1  /* VMID_BUF_ENA */
+#define WM9081_VMID_RAMP                        0x0008  /* VMID_RAMP */
+#define WM9081_VMID_RAMP_MASK                   0x0008  /* VMID_RAMP */
+#define WM9081_VMID_RAMP_SHIFT                       3  /* VMID_RAMP */
+#define WM9081_VMID_RAMP_WIDTH                       1  /* VMID_RAMP */
+#define WM9081_VMID_SEL_MASK                    0x0006  /* VMID_SEL - [2:1] */
+#define WM9081_VMID_SEL_SHIFT                        1  /* VMID_SEL - [2:1] */
+#define WM9081_VMID_SEL_WIDTH                        2  /* VMID_SEL - [2:1] */
+#define WM9081_VMID_FAST_ST                     0x0001  /* VMID_FAST_ST */
+#define WM9081_VMID_FAST_ST_MASK                0x0001  /* VMID_FAST_ST */
+#define WM9081_VMID_FAST_ST_SHIFT                    0  /* VMID_FAST_ST */
+#define WM9081_VMID_FAST_ST_WIDTH                    1  /* VMID_FAST_ST */
+
+/*
+ * R5 (0x05) - Bias Control 1
+ */
+#define WM9081_BIAS_SRC                         0x0040  /* BIAS_SRC */
+#define WM9081_BIAS_SRC_MASK                    0x0040  /* BIAS_SRC */
+#define WM9081_BIAS_SRC_SHIFT                        6  /* BIAS_SRC */
+#define WM9081_BIAS_SRC_WIDTH                        1  /* BIAS_SRC */
+#define WM9081_STBY_BIAS_LVL                    0x0020  /* STBY_BIAS_LVL */
+#define WM9081_STBY_BIAS_LVL_MASK               0x0020  /* STBY_BIAS_LVL */
+#define WM9081_STBY_BIAS_LVL_SHIFT                   5  /* STBY_BIAS_LVL */
+#define WM9081_STBY_BIAS_LVL_WIDTH                   1  /* STBY_BIAS_LVL */
+#define WM9081_STBY_BIAS_ENA                    0x0010  /* STBY_BIAS_ENA */
+#define WM9081_STBY_BIAS_ENA_MASK               0x0010  /* STBY_BIAS_ENA */
+#define WM9081_STBY_BIAS_ENA_SHIFT                   4  /* STBY_BIAS_ENA */
+#define WM9081_STBY_BIAS_ENA_WIDTH                   1  /* STBY_BIAS_ENA */
+#define WM9081_BIAS_LVL_MASK                    0x000C  /* BIAS_LVL - [3:2] */
+#define WM9081_BIAS_LVL_SHIFT                        2  /* BIAS_LVL - [3:2] */
+#define WM9081_BIAS_LVL_WIDTH                        2  /* BIAS_LVL - [3:2] */
+#define WM9081_BIAS_ENA                         0x0002  /* BIAS_ENA */
+#define WM9081_BIAS_ENA_MASK                    0x0002  /* BIAS_ENA */
+#define WM9081_BIAS_ENA_SHIFT                        1  /* BIAS_ENA */
+#define WM9081_BIAS_ENA_WIDTH                        1  /* BIAS_ENA */
+#define WM9081_STARTUP_BIAS_ENA                 0x0001  /* STARTUP_BIAS_ENA */
+#define WM9081_STARTUP_BIAS_ENA_MASK            0x0001  /* STARTUP_BIAS_ENA */
+#define WM9081_STARTUP_BIAS_ENA_SHIFT                0  /* STARTUP_BIAS_ENA */
+#define WM9081_STARTUP_BIAS_ENA_WIDTH                1  /* STARTUP_BIAS_ENA */
+
+/*
+ * R7 (0x07) - Analogue Mixer
+ */
+#define WM9081_DAC_SEL                          0x0010  /* DAC_SEL */
+#define WM9081_DAC_SEL_MASK                     0x0010  /* DAC_SEL */
+#define WM9081_DAC_SEL_SHIFT                         4  /* DAC_SEL */
+#define WM9081_DAC_SEL_WIDTH                         1  /* DAC_SEL */
+#define WM9081_IN2_VOL                          0x0008  /* IN2_VOL */
+#define WM9081_IN2_VOL_MASK                     0x0008  /* IN2_VOL */
+#define WM9081_IN2_VOL_SHIFT                         3  /* IN2_VOL */
+#define WM9081_IN2_VOL_WIDTH                         1  /* IN2_VOL */
+#define WM9081_IN2_ENA                          0x0004  /* IN2_ENA */
+#define WM9081_IN2_ENA_MASK                     0x0004  /* IN2_ENA */
+#define WM9081_IN2_ENA_SHIFT                         2  /* IN2_ENA */
+#define WM9081_IN2_ENA_WIDTH                         1  /* IN2_ENA */
+#define WM9081_IN1_VOL                          0x0002  /* IN1_VOL */
+#define WM9081_IN1_VOL_MASK                     0x0002  /* IN1_VOL */
+#define WM9081_IN1_VOL_SHIFT                         1  /* IN1_VOL */
+#define WM9081_IN1_VOL_WIDTH                         1  /* IN1_VOL */
+#define WM9081_IN1_ENA                          0x0001  /* IN1_ENA */
+#define WM9081_IN1_ENA_MASK                     0x0001  /* IN1_ENA */
+#define WM9081_IN1_ENA_SHIFT                         0  /* IN1_ENA */
+#define WM9081_IN1_ENA_WIDTH                         1  /* IN1_ENA */
+
+/*
+ * R8 (0x08) - Anti Pop Control
+ */
+#define WM9081_LINEOUT_DISCH                    0x0004  /* LINEOUT_DISCH */
+#define WM9081_LINEOUT_DISCH_MASK               0x0004  /* LINEOUT_DISCH */
+#define WM9081_LINEOUT_DISCH_SHIFT                   2  /* LINEOUT_DISCH */
+#define WM9081_LINEOUT_DISCH_WIDTH                   1  /* LINEOUT_DISCH */
+#define WM9081_LINEOUT_VROI                     0x0002  /* LINEOUT_VROI */
+#define WM9081_LINEOUT_VROI_MASK                0x0002  /* LINEOUT_VROI */
+#define WM9081_LINEOUT_VROI_SHIFT                    1  /* LINEOUT_VROI */
+#define WM9081_LINEOUT_VROI_WIDTH                    1  /* LINEOUT_VROI */
+#define WM9081_LINEOUT_CLAMP                    0x0001  /* LINEOUT_CLAMP */
+#define WM9081_LINEOUT_CLAMP_MASK               0x0001  /* LINEOUT_CLAMP */
+#define WM9081_LINEOUT_CLAMP_SHIFT                   0  /* LINEOUT_CLAMP */
+#define WM9081_LINEOUT_CLAMP_WIDTH                   1  /* LINEOUT_CLAMP */
+
+/*
+ * R9 (0x09) - Analogue Speaker 1
+ */
+#define WM9081_SPK_DCGAIN_MASK                  0x0038  /* SPK_DCGAIN - [5:3] */
+#define WM9081_SPK_DCGAIN_SHIFT                      3  /* SPK_DCGAIN - [5:3] */
+#define WM9081_SPK_DCGAIN_WIDTH                      3  /* SPK_DCGAIN - [5:3] */
+#define WM9081_SPK_ACGAIN_MASK                  0x0007  /* SPK_ACGAIN - [2:0] */
+#define WM9081_SPK_ACGAIN_SHIFT                      0  /* SPK_ACGAIN - [2:0] */
+#define WM9081_SPK_ACGAIN_WIDTH                      3  /* SPK_ACGAIN - [2:0] */
+
+/*
+ * R10 (0x0A) - Analogue Speaker 2
+ */
+#define WM9081_SPK_MODE                         0x0040  /* SPK_MODE */
+#define WM9081_SPK_MODE_MASK                    0x0040  /* SPK_MODE */
+#define WM9081_SPK_MODE_SHIFT                        6  /* SPK_MODE */
+#define WM9081_SPK_MODE_WIDTH                        1  /* SPK_MODE */
+#define WM9081_SPK_INV_MUTE                     0x0010  /* SPK_INV_MUTE */
+#define WM9081_SPK_INV_MUTE_MASK                0x0010  /* SPK_INV_MUTE */
+#define WM9081_SPK_INV_MUTE_SHIFT                    4  /* SPK_INV_MUTE */
+#define WM9081_SPK_INV_MUTE_WIDTH                    1  /* SPK_INV_MUTE */
+#define WM9081_OUT_SPK_CTRL                     0x0008  /* OUT_SPK_CTRL */
+#define WM9081_OUT_SPK_CTRL_MASK                0x0008  /* OUT_SPK_CTRL */
+#define WM9081_OUT_SPK_CTRL_SHIFT                    3  /* OUT_SPK_CTRL */
+#define WM9081_OUT_SPK_CTRL_WIDTH                    1  /* OUT_SPK_CTRL */
+
+/*
+ * R11 (0x0B) - Power Management
+ */
+#define WM9081_TSHUT_ENA                        0x0100  /* TSHUT_ENA */
+#define WM9081_TSHUT_ENA_MASK                   0x0100  /* TSHUT_ENA */
+#define WM9081_TSHUT_ENA_SHIFT                       8  /* TSHUT_ENA */
+#define WM9081_TSHUT_ENA_WIDTH                       1  /* TSHUT_ENA */
+#define WM9081_TSENSE_ENA                       0x0080  /* TSENSE_ENA */
+#define WM9081_TSENSE_ENA_MASK                  0x0080  /* TSENSE_ENA */
+#define WM9081_TSENSE_ENA_SHIFT                      7  /* TSENSE_ENA */
+#define WM9081_TSENSE_ENA_WIDTH                      1  /* TSENSE_ENA */
+#define WM9081_TEMP_SHUT                        0x0040  /* TEMP_SHUT */
+#define WM9081_TEMP_SHUT_MASK                   0x0040  /* TEMP_SHUT */
+#define WM9081_TEMP_SHUT_SHIFT                       6  /* TEMP_SHUT */
+#define WM9081_TEMP_SHUT_WIDTH                       1  /* TEMP_SHUT */
+#define WM9081_LINEOUT_ENA                      0x0010  /* LINEOUT_ENA */
+#define WM9081_LINEOUT_ENA_MASK                 0x0010  /* LINEOUT_ENA */
+#define WM9081_LINEOUT_ENA_SHIFT                     4  /* LINEOUT_ENA */
+#define WM9081_LINEOUT_ENA_WIDTH                     1  /* LINEOUT_ENA */
+#define WM9081_SPKPGA_ENA                       0x0004  /* SPKPGA_ENA */
+#define WM9081_SPKPGA_ENA_MASK                  0x0004  /* SPKPGA_ENA */
+#define WM9081_SPKPGA_ENA_SHIFT                      2  /* SPKPGA_ENA */
+#define WM9081_SPKPGA_ENA_WIDTH                      1  /* SPKPGA_ENA */
+#define WM9081_SPK_ENA                          0x0002  /* SPK_ENA */
+#define WM9081_SPK_ENA_MASK                     0x0002  /* SPK_ENA */
+#define WM9081_SPK_ENA_SHIFT                         1  /* SPK_ENA */
+#define WM9081_SPK_ENA_WIDTH                         1  /* SPK_ENA */
+#define WM9081_DAC_ENA                          0x0001  /* DAC_ENA */
+#define WM9081_DAC_ENA_MASK                     0x0001  /* DAC_ENA */
+#define WM9081_DAC_ENA_SHIFT                         0  /* DAC_ENA */
+#define WM9081_DAC_ENA_WIDTH                         1  /* DAC_ENA */
+
+/*
+ * R12 (0x0C) - Clock Control 1
+ */
+#define WM9081_CLK_OP_DIV_MASK                  0x1C00  /* CLK_OP_DIV - [12:10] */
+#define WM9081_CLK_OP_DIV_SHIFT                     10  /* CLK_OP_DIV - [12:10] */
+#define WM9081_CLK_OP_DIV_WIDTH                      3  /* CLK_OP_DIV - [12:10] */
+#define WM9081_CLK_TO_DIV_MASK                  0x0300  /* CLK_TO_DIV - [9:8] */
+#define WM9081_CLK_TO_DIV_SHIFT                      8  /* CLK_TO_DIV - [9:8] */
+#define WM9081_CLK_TO_DIV_WIDTH                      2  /* CLK_TO_DIV - [9:8] */
+#define WM9081_MCLKDIV2                         0x0080  /* MCLKDIV2 */
+#define WM9081_MCLKDIV2_MASK                    0x0080  /* MCLKDIV2 */
+#define WM9081_MCLKDIV2_SHIFT                        7  /* MCLKDIV2 */
+#define WM9081_MCLKDIV2_WIDTH                        1  /* MCLKDIV2 */
+
+/*
+ * R13 (0x0D) - Clock Control 2
+ */
+#define WM9081_CLK_SYS_RATE_MASK                0x00F0  /* CLK_SYS_RATE - [7:4] */
+#define WM9081_CLK_SYS_RATE_SHIFT                    4  /* CLK_SYS_RATE - [7:4] */
+#define WM9081_CLK_SYS_RATE_WIDTH                    4  /* CLK_SYS_RATE - [7:4] */
+#define WM9081_SAMPLE_RATE_MASK                 0x000F  /* SAMPLE_RATE - [3:0] */
+#define WM9081_SAMPLE_RATE_SHIFT                     0  /* SAMPLE_RATE - [3:0] */
+#define WM9081_SAMPLE_RATE_WIDTH                     4  /* SAMPLE_RATE - [3:0] */
+
+/*
+ * R14 (0x0E) - Clock Control 3
+ */
+#define WM9081_CLK_SRC_SEL                      0x2000  /* CLK_SRC_SEL */
+#define WM9081_CLK_SRC_SEL_MASK                 0x2000  /* CLK_SRC_SEL */
+#define WM9081_CLK_SRC_SEL_SHIFT                    13  /* CLK_SRC_SEL */
+#define WM9081_CLK_SRC_SEL_WIDTH                     1  /* CLK_SRC_SEL */
+#define WM9081_CLK_OP_ENA                       0x0020  /* CLK_OP_ENA */
+#define WM9081_CLK_OP_ENA_MASK                  0x0020  /* CLK_OP_ENA */
+#define WM9081_CLK_OP_ENA_SHIFT                      5  /* CLK_OP_ENA */
+#define WM9081_CLK_OP_ENA_WIDTH                      1  /* CLK_OP_ENA */
+#define WM9081_CLK_TO_ENA                       0x0004  /* CLK_TO_ENA */
+#define WM9081_CLK_TO_ENA_MASK                  0x0004  /* CLK_TO_ENA */
+#define WM9081_CLK_TO_ENA_SHIFT                      2  /* CLK_TO_ENA */
+#define WM9081_CLK_TO_ENA_WIDTH                      1  /* CLK_TO_ENA */
+#define WM9081_CLK_DSP_ENA                      0x0002  /* CLK_DSP_ENA */
+#define WM9081_CLK_DSP_ENA_MASK                 0x0002  /* CLK_DSP_ENA */
+#define WM9081_CLK_DSP_ENA_SHIFT                     1  /* CLK_DSP_ENA */
+#define WM9081_CLK_DSP_ENA_WIDTH                     1  /* CLK_DSP_ENA */
+#define WM9081_CLK_SYS_ENA                      0x0001  /* CLK_SYS_ENA */
+#define WM9081_CLK_SYS_ENA_MASK                 0x0001  /* CLK_SYS_ENA */
+#define WM9081_CLK_SYS_ENA_SHIFT                     0  /* CLK_SYS_ENA */
+#define WM9081_CLK_SYS_ENA_WIDTH                     1  /* CLK_SYS_ENA */
+
+/*
+ * R16 (0x10) - FLL Control 1
+ */
+#define WM9081_FLL_HOLD                         0x0008  /* FLL_HOLD */
+#define WM9081_FLL_HOLD_MASK                    0x0008  /* FLL_HOLD */
+#define WM9081_FLL_HOLD_SHIFT                        3  /* FLL_HOLD */
+#define WM9081_FLL_HOLD_WIDTH                        1  /* FLL_HOLD */
+#define WM9081_FLL_FRAC                         0x0004  /* FLL_FRAC */
+#define WM9081_FLL_FRAC_MASK                    0x0004  /* FLL_FRAC */
+#define WM9081_FLL_FRAC_SHIFT                        2  /* FLL_FRAC */
+#define WM9081_FLL_FRAC_WIDTH                        1  /* FLL_FRAC */
+#define WM9081_FLL_ENA                          0x0001  /* FLL_ENA */
+#define WM9081_FLL_ENA_MASK                     0x0001  /* FLL_ENA */
+#define WM9081_FLL_ENA_SHIFT                         0  /* FLL_ENA */
+#define WM9081_FLL_ENA_WIDTH                         1  /* FLL_ENA */
+
+/*
+ * R17 (0x11) - FLL Control 2
+ */
+#define WM9081_FLL_OUTDIV_MASK                  0x0700  /* FLL_OUTDIV - [10:8] */
+#define WM9081_FLL_OUTDIV_SHIFT                      8  /* FLL_OUTDIV - [10:8] */
+#define WM9081_FLL_OUTDIV_WIDTH                      3  /* FLL_OUTDIV - [10:8] */
+#define WM9081_FLL_CTRL_RATE_MASK               0x0070  /* FLL_CTRL_RATE - [6:4] */
+#define WM9081_FLL_CTRL_RATE_SHIFT                   4  /* FLL_CTRL_RATE - [6:4] */
+#define WM9081_FLL_CTRL_RATE_WIDTH                   3  /* FLL_CTRL_RATE - [6:4] */
+#define WM9081_FLL_FRATIO_MASK                  0x0007  /* FLL_FRATIO - [2:0] */
+#define WM9081_FLL_FRATIO_SHIFT                      0  /* FLL_FRATIO - [2:0] */
+#define WM9081_FLL_FRATIO_WIDTH                      3  /* FLL_FRATIO - [2:0] */
+
+/*
+ * R18 (0x12) - FLL Control 3
+ */
+#define WM9081_FLL_K_MASK                       0xFFFF  /* FLL_K - [15:0] */
+#define WM9081_FLL_K_SHIFT                           0  /* FLL_K - [15:0] */
+#define WM9081_FLL_K_WIDTH                          16  /* FLL_K - [15:0] */
+
+/*
+ * R19 (0x13) - FLL Control 4
+ */
+#define WM9081_FLL_N_MASK                       0x7FE0  /* FLL_N - [14:5] */
+#define WM9081_FLL_N_SHIFT                           5  /* FLL_N - [14:5] */
+#define WM9081_FLL_N_WIDTH                          10  /* FLL_N - [14:5] */
+#define WM9081_FLL_GAIN_MASK                    0x000F  /* FLL_GAIN - [3:0] */
+#define WM9081_FLL_GAIN_SHIFT                        0  /* FLL_GAIN - [3:0] */
+#define WM9081_FLL_GAIN_WIDTH                        4  /* FLL_GAIN - [3:0] */
+
+/*
+ * R20 (0x14) - FLL Control 5
+ */
+#define WM9081_FLL_CLK_REF_DIV_MASK             0x0018  /* FLL_CLK_REF_DIV - [4:3] */
+#define WM9081_FLL_CLK_REF_DIV_SHIFT                 3  /* FLL_CLK_REF_DIV - [4:3] */
+#define WM9081_FLL_CLK_REF_DIV_WIDTH                 2  /* FLL_CLK_REF_DIV - [4:3] */
+#define WM9081_FLL_CLK_SRC_MASK                 0x0003  /* FLL_CLK_SRC - [1:0] */
+#define WM9081_FLL_CLK_SRC_SHIFT                     0  /* FLL_CLK_SRC - [1:0] */
+#define WM9081_FLL_CLK_SRC_WIDTH                     2  /* FLL_CLK_SRC - [1:0] */
+
+/*
+ * R22 (0x16) - Audio Interface 1
+ */
+#define WM9081_AIFDAC_CHAN                      0x0040  /* AIFDAC_CHAN */
+#define WM9081_AIFDAC_CHAN_MASK                 0x0040  /* AIFDAC_CHAN */
+#define WM9081_AIFDAC_CHAN_SHIFT                     6  /* AIFDAC_CHAN */
+#define WM9081_AIFDAC_CHAN_WIDTH                     1  /* AIFDAC_CHAN */
+#define WM9081_AIFDAC_TDM_SLOT_MASK             0x0030  /* AIFDAC_TDM_SLOT - [5:4] */
+#define WM9081_AIFDAC_TDM_SLOT_SHIFT                 4  /* AIFDAC_TDM_SLOT - [5:4] */
+#define WM9081_AIFDAC_TDM_SLOT_WIDTH                 2  /* AIFDAC_TDM_SLOT - [5:4] */
+#define WM9081_AIFDAC_TDM_MODE_MASK             0x000C  /* AIFDAC_TDM_MODE - [3:2] */
+#define WM9081_AIFDAC_TDM_MODE_SHIFT                 2  /* AIFDAC_TDM_MODE - [3:2] */
+#define WM9081_AIFDAC_TDM_MODE_WIDTH                 2  /* AIFDAC_TDM_MODE - [3:2] */
+#define WM9081_DAC_COMP                         0x0002  /* DAC_COMP */
+#define WM9081_DAC_COMP_MASK                    0x0002  /* DAC_COMP */
+#define WM9081_DAC_COMP_SHIFT                        1  /* DAC_COMP */
+#define WM9081_DAC_COMP_WIDTH                        1  /* DAC_COMP */
+#define WM9081_DAC_COMPMODE                     0x0001  /* DAC_COMPMODE */
+#define WM9081_DAC_COMPMODE_MASK                0x0001  /* DAC_COMPMODE */
+#define WM9081_DAC_COMPMODE_SHIFT                    0  /* DAC_COMPMODE */
+#define WM9081_DAC_COMPMODE_WIDTH                    1  /* DAC_COMPMODE */
+
+/*
+ * R23 (0x17) - Audio Interface 2
+ */
+#define WM9081_AIF_TRIS                         0x0200  /* AIF_TRIS */
+#define WM9081_AIF_TRIS_MASK                    0x0200  /* AIF_TRIS */
+#define WM9081_AIF_TRIS_SHIFT                        9  /* AIF_TRIS */
+#define WM9081_AIF_TRIS_WIDTH                        1  /* AIF_TRIS */
+#define WM9081_DAC_DAT_INV                      0x0100  /* DAC_DAT_INV */
+#define WM9081_DAC_DAT_INV_MASK                 0x0100  /* DAC_DAT_INV */
+#define WM9081_DAC_DAT_INV_SHIFT                     8  /* DAC_DAT_INV */
+#define WM9081_DAC_DAT_INV_WIDTH                     1  /* DAC_DAT_INV */
+#define WM9081_AIF_BCLK_INV                     0x0080  /* AIF_BCLK_INV */
+#define WM9081_AIF_BCLK_INV_MASK                0x0080  /* AIF_BCLK_INV */
+#define WM9081_AIF_BCLK_INV_SHIFT                    7  /* AIF_BCLK_INV */
+#define WM9081_AIF_BCLK_INV_WIDTH                    1  /* AIF_BCLK_INV */
+#define WM9081_BCLK_DIR                         0x0040  /* BCLK_DIR */
+#define WM9081_BCLK_DIR_MASK                    0x0040  /* BCLK_DIR */
+#define WM9081_BCLK_DIR_SHIFT                        6  /* BCLK_DIR */
+#define WM9081_BCLK_DIR_WIDTH                        1  /* BCLK_DIR */
+#define WM9081_LRCLK_DIR                        0x0020  /* LRCLK_DIR */
+#define WM9081_LRCLK_DIR_MASK                   0x0020  /* LRCLK_DIR */
+#define WM9081_LRCLK_DIR_SHIFT                       5  /* LRCLK_DIR */
+#define WM9081_LRCLK_DIR_WIDTH                       1  /* LRCLK_DIR */
+#define WM9081_AIF_LRCLK_INV                    0x0010  /* AIF_LRCLK_INV */
+#define WM9081_AIF_LRCLK_INV_MASK               0x0010  /* AIF_LRCLK_INV */
+#define WM9081_AIF_LRCLK_INV_SHIFT                   4  /* AIF_LRCLK_INV */
+#define WM9081_AIF_LRCLK_INV_WIDTH                   1  /* AIF_LRCLK_INV */
+#define WM9081_AIF_WL_MASK                      0x000C  /* AIF_WL - [3:2] */
+#define WM9081_AIF_WL_SHIFT                          2  /* AIF_WL - [3:2] */
+#define WM9081_AIF_WL_WIDTH                          2  /* AIF_WL - [3:2] */
+#define WM9081_AIF_FMT_MASK                     0x0003  /* AIF_FMT - [1:0] */
+#define WM9081_AIF_FMT_SHIFT                         0  /* AIF_FMT - [1:0] */
+#define WM9081_AIF_FMT_WIDTH                         2  /* AIF_FMT - [1:0] */
+
+/*
+ * R24 (0x18) - Audio Interface 3
+ */
+#define WM9081_BCLK_DIV_MASK                    0x001F  /* BCLK_DIV - [4:0] */
+#define WM9081_BCLK_DIV_SHIFT                        0  /* BCLK_DIV - [4:0] */
+#define WM9081_BCLK_DIV_WIDTH                        5  /* BCLK_DIV - [4:0] */
+
+/*
+ * R25 (0x19) - Audio Interface 4
+ */
+#define WM9081_LRCLK_RATE_MASK                  0x07FF  /* LRCLK_RATE - [10:0] */
+#define WM9081_LRCLK_RATE_SHIFT                      0  /* LRCLK_RATE - [10:0] */
+#define WM9081_LRCLK_RATE_WIDTH                     11  /* LRCLK_RATE - [10:0] */
+
+/*
+ * R26 (0x1A) - Interrupt Status
+ */
+#define WM9081_WSEQ_BUSY_EINT                   0x0004  /* WSEQ_BUSY_EINT */
+#define WM9081_WSEQ_BUSY_EINT_MASK              0x0004  /* WSEQ_BUSY_EINT */
+#define WM9081_WSEQ_BUSY_EINT_SHIFT                  2  /* WSEQ_BUSY_EINT */
+#define WM9081_WSEQ_BUSY_EINT_WIDTH                  1  /* WSEQ_BUSY_EINT */
+#define WM9081_TSHUT_EINT                       0x0001  /* TSHUT_EINT */
+#define WM9081_TSHUT_EINT_MASK                  0x0001  /* TSHUT_EINT */
+#define WM9081_TSHUT_EINT_SHIFT                      0  /* TSHUT_EINT */
+#define WM9081_TSHUT_EINT_WIDTH                      1  /* TSHUT_EINT */
+
+/*
+ * R27 (0x1B) - Interrupt Status Mask
+ */
+#define WM9081_IM_WSEQ_BUSY_EINT                0x0004  /* IM_WSEQ_BUSY_EINT */
+#define WM9081_IM_WSEQ_BUSY_EINT_MASK           0x0004  /* IM_WSEQ_BUSY_EINT */
+#define WM9081_IM_WSEQ_BUSY_EINT_SHIFT               2  /* IM_WSEQ_BUSY_EINT */
+#define WM9081_IM_WSEQ_BUSY_EINT_WIDTH               1  /* IM_WSEQ_BUSY_EINT */
+#define WM9081_IM_TSHUT_EINT                    0x0001  /* IM_TSHUT_EINT */
+#define WM9081_IM_TSHUT_EINT_MASK               0x0001  /* IM_TSHUT_EINT */
+#define WM9081_IM_TSHUT_EINT_SHIFT                   0  /* IM_TSHUT_EINT */
+#define WM9081_IM_TSHUT_EINT_WIDTH                   1  /* IM_TSHUT_EINT */
+
+/*
+ * R28 (0x1C) - Interrupt Polarity
+ */
+#define WM9081_TSHUT_INV                        0x0001  /* TSHUT_INV */
+#define WM9081_TSHUT_INV_MASK                   0x0001  /* TSHUT_INV */
+#define WM9081_TSHUT_INV_SHIFT                       0  /* TSHUT_INV */
+#define WM9081_TSHUT_INV_WIDTH                       1  /* TSHUT_INV */
+
+/*
+ * R29 (0x1D) - Interrupt Control
+ */
+#define WM9081_IRQ_POL                          0x8000  /* IRQ_POL */
+#define WM9081_IRQ_POL_MASK                     0x8000  /* IRQ_POL */
+#define WM9081_IRQ_POL_SHIFT                        15  /* IRQ_POL */
+#define WM9081_IRQ_POL_WIDTH                         1  /* IRQ_POL */
+#define WM9081_IRQ_OP_CTRL                      0x0001  /* IRQ_OP_CTRL */
+#define WM9081_IRQ_OP_CTRL_MASK                 0x0001  /* IRQ_OP_CTRL */
+#define WM9081_IRQ_OP_CTRL_SHIFT                     0  /* IRQ_OP_CTRL */
+#define WM9081_IRQ_OP_CTRL_WIDTH                     1  /* IRQ_OP_CTRL */
+
+/*
+ * R30 (0x1E) - DAC Digital 1
+ */
+#define WM9081_DAC_VOL_MASK                     0x00FF  /* DAC_VOL - [7:0] */
+#define WM9081_DAC_VOL_SHIFT                         0  /* DAC_VOL - [7:0] */
+#define WM9081_DAC_VOL_WIDTH                         8  /* DAC_VOL - [7:0] */
+
+/*
+ * R31 (0x1F) - DAC Digital 2
+ */
+#define WM9081_DAC_MUTERATE                     0x0400  /* DAC_MUTERATE */
+#define WM9081_DAC_MUTERATE_MASK                0x0400  /* DAC_MUTERATE */
+#define WM9081_DAC_MUTERATE_SHIFT                   10  /* DAC_MUTERATE */
+#define WM9081_DAC_MUTERATE_WIDTH                    1  /* DAC_MUTERATE */
+#define WM9081_DAC_MUTEMODE                     0x0200  /* DAC_MUTEMODE */
+#define WM9081_DAC_MUTEMODE_MASK                0x0200  /* DAC_MUTEMODE */
+#define WM9081_DAC_MUTEMODE_SHIFT                    9  /* DAC_MUTEMODE */
+#define WM9081_DAC_MUTEMODE_WIDTH                    1  /* DAC_MUTEMODE */
+#define WM9081_DAC_MUTE                         0x0008  /* DAC_MUTE */
+#define WM9081_DAC_MUTE_MASK                    0x0008  /* DAC_MUTE */
+#define WM9081_DAC_MUTE_SHIFT                        3  /* DAC_MUTE */
+#define WM9081_DAC_MUTE_WIDTH                        1  /* DAC_MUTE */
+#define WM9081_DEEMPH_MASK                      0x0006  /* DEEMPH - [2:1] */
+#define WM9081_DEEMPH_SHIFT                          1  /* DEEMPH - [2:1] */
+#define WM9081_DEEMPH_WIDTH                          2  /* DEEMPH - [2:1] */
+
+/*
+ * R32 (0x20) - DRC 1
+ */
+#define WM9081_DRC_ENA                          0x8000  /* DRC_ENA */
+#define WM9081_DRC_ENA_MASK                     0x8000  /* DRC_ENA */
+#define WM9081_DRC_ENA_SHIFT                        15  /* DRC_ENA */
+#define WM9081_DRC_ENA_WIDTH                         1  /* DRC_ENA */
+#define WM9081_DRC_STARTUP_GAIN_MASK            0x07C0  /* DRC_STARTUP_GAIN - [10:6] */
+#define WM9081_DRC_STARTUP_GAIN_SHIFT                6  /* DRC_STARTUP_GAIN - [10:6] */
+#define WM9081_DRC_STARTUP_GAIN_WIDTH                5  /* DRC_STARTUP_GAIN - [10:6] */
+#define WM9081_DRC_FF_DLY                       0x0020  /* DRC_FF_DLY */
+#define WM9081_DRC_FF_DLY_MASK                  0x0020  /* DRC_FF_DLY */
+#define WM9081_DRC_FF_DLY_SHIFT                      5  /* DRC_FF_DLY */
+#define WM9081_DRC_FF_DLY_WIDTH                      1  /* DRC_FF_DLY */
+#define WM9081_DRC_QR                           0x0004  /* DRC_QR */
+#define WM9081_DRC_QR_MASK                      0x0004  /* DRC_QR */
+#define WM9081_DRC_QR_SHIFT                          2  /* DRC_QR */
+#define WM9081_DRC_QR_WIDTH                          1  /* DRC_QR */
+#define WM9081_DRC_ANTICLIP                     0x0002  /* DRC_ANTICLIP */
+#define WM9081_DRC_ANTICLIP_MASK                0x0002  /* DRC_ANTICLIP */
+#define WM9081_DRC_ANTICLIP_SHIFT                    1  /* DRC_ANTICLIP */
+#define WM9081_DRC_ANTICLIP_WIDTH                    1  /* DRC_ANTICLIP */
+
+/*
+ * R33 (0x21) - DRC 2
+ */
+#define WM9081_DRC_ATK_MASK                     0xF000  /* DRC_ATK - [15:12] */
+#define WM9081_DRC_ATK_SHIFT                        12  /* DRC_ATK - [15:12] */
+#define WM9081_DRC_ATK_WIDTH                         4  /* DRC_ATK - [15:12] */
+#define WM9081_DRC_DCY_MASK                     0x0F00  /* DRC_DCY - [11:8] */
+#define WM9081_DRC_DCY_SHIFT                         8  /* DRC_DCY - [11:8] */
+#define WM9081_DRC_DCY_WIDTH                         4  /* DRC_DCY - [11:8] */
+#define WM9081_DRC_QR_THR_MASK                  0x00C0  /* DRC_QR_THR - [7:6] */
+#define WM9081_DRC_QR_THR_SHIFT                      6  /* DRC_QR_THR - [7:6] */
+#define WM9081_DRC_QR_THR_WIDTH                      2  /* DRC_QR_THR - [7:6] */
+#define WM9081_DRC_QR_DCY_MASK                  0x0030  /* DRC_QR_DCY - [5:4] */
+#define WM9081_DRC_QR_DCY_SHIFT                      4  /* DRC_QR_DCY - [5:4] */
+#define WM9081_DRC_QR_DCY_WIDTH                      2  /* DRC_QR_DCY - [5:4] */
+#define WM9081_DRC_MINGAIN_MASK                 0x000C  /* DRC_MINGAIN - [3:2] */
+#define WM9081_DRC_MINGAIN_SHIFT                     2  /* DRC_MINGAIN - [3:2] */
+#define WM9081_DRC_MINGAIN_WIDTH                     2  /* DRC_MINGAIN - [3:2] */
+#define WM9081_DRC_MAXGAIN_MASK                 0x0003  /* DRC_MAXGAIN - [1:0] */
+#define WM9081_DRC_MAXGAIN_SHIFT                     0  /* DRC_MAXGAIN - [1:0] */
+#define WM9081_DRC_MAXGAIN_WIDTH                     2  /* DRC_MAXGAIN - [1:0] */
+
+/*
+ * R34 (0x22) - DRC 3
+ */
+#define WM9081_DRC_HI_COMP_MASK                 0x0038  /* DRC_HI_COMP - [5:3] */
+#define WM9081_DRC_HI_COMP_SHIFT                     3  /* DRC_HI_COMP - [5:3] */
+#define WM9081_DRC_HI_COMP_WIDTH                     3  /* DRC_HI_COMP - [5:3] */
+#define WM9081_DRC_LO_COMP_MASK                 0x0007  /* DRC_LO_COMP - [2:0] */
+#define WM9081_DRC_LO_COMP_SHIFT                     0  /* DRC_LO_COMP - [2:0] */
+#define WM9081_DRC_LO_COMP_WIDTH                     3  /* DRC_LO_COMP - [2:0] */
+
+/*
+ * R35 (0x23) - DRC 4
+ */
+#define WM9081_DRC_KNEE_IP_MASK                 0x07E0  /* DRC_KNEE_IP - [10:5] */
+#define WM9081_DRC_KNEE_IP_SHIFT                     5  /* DRC_KNEE_IP - [10:5] */
+#define WM9081_DRC_KNEE_IP_WIDTH                     6  /* DRC_KNEE_IP - [10:5] */
+#define WM9081_DRC_KNEE_OP_MASK                 0x001F  /* DRC_KNEE_OP - [4:0] */
+#define WM9081_DRC_KNEE_OP_SHIFT                     0  /* DRC_KNEE_OP - [4:0] */
+#define WM9081_DRC_KNEE_OP_WIDTH                     5  /* DRC_KNEE_OP - [4:0] */
+
+/*
+ * R38 (0x26) - Write Sequencer 1
+ */
+#define WM9081_WSEQ_ENA                         0x8000  /* WSEQ_ENA */
+#define WM9081_WSEQ_ENA_MASK                    0x8000  /* WSEQ_ENA */
+#define WM9081_WSEQ_ENA_SHIFT                       15  /* WSEQ_ENA */
+#define WM9081_WSEQ_ENA_WIDTH                        1  /* WSEQ_ENA */
+#define WM9081_WSEQ_ABORT                       0x0200  /* WSEQ_ABORT */
+#define WM9081_WSEQ_ABORT_MASK                  0x0200  /* WSEQ_ABORT */
+#define WM9081_WSEQ_ABORT_SHIFT                      9  /* WSEQ_ABORT */
+#define WM9081_WSEQ_ABORT_WIDTH                      1  /* WSEQ_ABORT */
+#define WM9081_WSEQ_START                       0x0100  /* WSEQ_START */
+#define WM9081_WSEQ_START_MASK                  0x0100  /* WSEQ_START */
+#define WM9081_WSEQ_START_SHIFT                      8  /* WSEQ_START */
+#define WM9081_WSEQ_START_WIDTH                      1  /* WSEQ_START */
+#define WM9081_WSEQ_START_INDEX_MASK            0x007F  /* WSEQ_START_INDEX - [6:0] */
+#define WM9081_WSEQ_START_INDEX_SHIFT                0  /* WSEQ_START_INDEX - [6:0] */
+#define WM9081_WSEQ_START_INDEX_WIDTH                7  /* WSEQ_START_INDEX - [6:0] */
+
+/*
+ * R39 (0x27) - Write Sequencer 2
+ */
+#define WM9081_WSEQ_CURRENT_INDEX_MASK          0x07F0  /* WSEQ_CURRENT_INDEX - [10:4] */
+#define WM9081_WSEQ_CURRENT_INDEX_SHIFT              4  /* WSEQ_CURRENT_INDEX - [10:4] */
+#define WM9081_WSEQ_CURRENT_INDEX_WIDTH              7  /* WSEQ_CURRENT_INDEX - [10:4] */
+#define WM9081_WSEQ_BUSY                        0x0001  /* WSEQ_BUSY */
+#define WM9081_WSEQ_BUSY_MASK                   0x0001  /* WSEQ_BUSY */
+#define WM9081_WSEQ_BUSY_SHIFT                       0  /* WSEQ_BUSY */
+#define WM9081_WSEQ_BUSY_WIDTH                       1  /* WSEQ_BUSY */
+
+/*
+ * R40 (0x28) - MW Slave 1
+ */
+#define WM9081_SPI_CFG                          0x0020  /* SPI_CFG */
+#define WM9081_SPI_CFG_MASK                     0x0020  /* SPI_CFG */
+#define WM9081_SPI_CFG_SHIFT                         5  /* SPI_CFG */
+#define WM9081_SPI_CFG_WIDTH                         1  /* SPI_CFG */
+#define WM9081_SPI_4WIRE                        0x0010  /* SPI_4WIRE */
+#define WM9081_SPI_4WIRE_MASK                   0x0010  /* SPI_4WIRE */
+#define WM9081_SPI_4WIRE_SHIFT                       4  /* SPI_4WIRE */
+#define WM9081_SPI_4WIRE_WIDTH                       1  /* SPI_4WIRE */
+#define WM9081_ARA_ENA                          0x0008  /* ARA_ENA */
+#define WM9081_ARA_ENA_MASK                     0x0008  /* ARA_ENA */
+#define WM9081_ARA_ENA_SHIFT                         3  /* ARA_ENA */
+#define WM9081_ARA_ENA_WIDTH                         1  /* ARA_ENA */
+#define WM9081_AUTO_INC                         0x0002  /* AUTO_INC */
+#define WM9081_AUTO_INC_MASK                    0x0002  /* AUTO_INC */
+#define WM9081_AUTO_INC_SHIFT                        1  /* AUTO_INC */
+#define WM9081_AUTO_INC_WIDTH                        1  /* AUTO_INC */
+
+/*
+ * R42 (0x2A) - EQ 1
+ */
+#define WM9081_EQ_B1_GAIN_MASK                  0xF800  /* EQ_B1_GAIN - [15:11] */
+#define WM9081_EQ_B1_GAIN_SHIFT                     11  /* EQ_B1_GAIN - [15:11] */
+#define WM9081_EQ_B1_GAIN_WIDTH                      5  /* EQ_B1_GAIN - [15:11] */
+#define WM9081_EQ_B2_GAIN_MASK                  0x07C0  /* EQ_B2_GAIN - [10:6] */
+#define WM9081_EQ_B2_GAIN_SHIFT                      6  /* EQ_B2_GAIN - [10:6] */
+#define WM9081_EQ_B2_GAIN_WIDTH                      5  /* EQ_B2_GAIN - [10:6] */
+#define WM9081_EQ_B4_GAIN_MASK                  0x003E  /* EQ_B4_GAIN - [5:1] */
+#define WM9081_EQ_B4_GAIN_SHIFT                      1  /* EQ_B4_GAIN - [5:1] */
+#define WM9081_EQ_B4_GAIN_WIDTH                      5  /* EQ_B4_GAIN - [5:1] */
+#define WM9081_EQ_ENA                           0x0001  /* EQ_ENA */
+#define WM9081_EQ_ENA_MASK                      0x0001  /* EQ_ENA */
+#define WM9081_EQ_ENA_SHIFT                          0  /* EQ_ENA */
+#define WM9081_EQ_ENA_WIDTH                          1  /* EQ_ENA */
+
+/*
+ * R43 (0x2B) - EQ 2
+ */
+#define WM9081_EQ_B3_GAIN_MASK                  0xF800  /* EQ_B3_GAIN - [15:11] */
+#define WM9081_EQ_B3_GAIN_SHIFT                     11  /* EQ_B3_GAIN - [15:11] */
+#define WM9081_EQ_B3_GAIN_WIDTH                      5  /* EQ_B3_GAIN - [15:11] */
+#define WM9081_EQ_B5_GAIN_MASK                  0x07C0  /* EQ_B5_GAIN - [10:6] */
+#define WM9081_EQ_B5_GAIN_SHIFT                      6  /* EQ_B5_GAIN - [10:6] */
+#define WM9081_EQ_B5_GAIN_WIDTH                      5  /* EQ_B5_GAIN - [10:6] */
+
+/*
+ * R44 (0x2C) - EQ 3
+ */
+#define WM9081_EQ_B1_A_MASK                     0xFFFF  /* EQ_B1_A - [15:0] */
+#define WM9081_EQ_B1_A_SHIFT                         0  /* EQ_B1_A - [15:0] */
+#define WM9081_EQ_B1_A_WIDTH                        16  /* EQ_B1_A - [15:0] */
+
+/*
+ * R45 (0x2D) - EQ 4
+ */
+#define WM9081_EQ_B1_B_MASK                     0xFFFF  /* EQ_B1_B - [15:0] */
+#define WM9081_EQ_B1_B_SHIFT                         0  /* EQ_B1_B - [15:0] */
+#define WM9081_EQ_B1_B_WIDTH                        16  /* EQ_B1_B - [15:0] */
+
+/*
+ * R46 (0x2E) - EQ 5
+ */
+#define WM9081_EQ_B1_PG_MASK                    0xFFFF  /* EQ_B1_PG - [15:0] */
+#define WM9081_EQ_B1_PG_SHIFT                        0  /* EQ_B1_PG - [15:0] */
+#define WM9081_EQ_B1_PG_WIDTH                       16  /* EQ_B1_PG - [15:0] */
+
+/*
+ * R47 (0x2F) - EQ 6
+ */
+#define WM9081_EQ_B2_A_MASK                     0xFFFF  /* EQ_B2_A - [15:0] */
+#define WM9081_EQ_B2_A_SHIFT                         0  /* EQ_B2_A - [15:0] */
+#define WM9081_EQ_B2_A_WIDTH                        16  /* EQ_B2_A - [15:0] */
+
+/*
+ * R48 (0x30) - EQ 7
+ */
+#define WM9081_EQ_B2_B_MASK                     0xFFFF  /* EQ_B2_B - [15:0] */
+#define WM9081_EQ_B2_B_SHIFT                         0  /* EQ_B2_B - [15:0] */
+#define WM9081_EQ_B2_B_WIDTH                        16  /* EQ_B2_B - [15:0] */
+
+/*
+ * R49 (0x31) - EQ 8
+ */
+#define WM9081_EQ_B2_C_MASK                     0xFFFF  /* EQ_B2_C - [15:0] */
+#define WM9081_EQ_B2_C_SHIFT                         0  /* EQ_B2_C - [15:0] */
+#define WM9081_EQ_B2_C_WIDTH                        16  /* EQ_B2_C - [15:0] */
+
+/*
+ * R50 (0x32) - EQ 9
+ */
+#define WM9081_EQ_B2_PG_MASK                    0xFFFF  /* EQ_B2_PG - [15:0] */
+#define WM9081_EQ_B2_PG_SHIFT                        0  /* EQ_B2_PG - [15:0] */
+#define WM9081_EQ_B2_PG_WIDTH                       16  /* EQ_B2_PG - [15:0] */
+
+/*
+ * R51 (0x33) - EQ 10
+ */
+#define WM9081_EQ_B4_A_MASK                     0xFFFF  /* EQ_B4_A - [15:0] */
+#define WM9081_EQ_B4_A_SHIFT                         0  /* EQ_B4_A - [15:0] */
+#define WM9081_EQ_B4_A_WIDTH                        16  /* EQ_B4_A - [15:0] */
+
+/*
+ * R52 (0x34) - EQ 11
+ */
+#define WM9081_EQ_B4_B_MASK                     0xFFFF  /* EQ_B4_B - [15:0] */
+#define WM9081_EQ_B4_B_SHIFT                         0  /* EQ_B4_B - [15:0] */
+#define WM9081_EQ_B4_B_WIDTH                        16  /* EQ_B4_B - [15:0] */
+
+/*
+ * R53 (0x35) - EQ 12
+ */
+#define WM9081_EQ_B4_C_MASK                     0xFFFF  /* EQ_B4_C - [15:0] */
+#define WM9081_EQ_B4_C_SHIFT                         0  /* EQ_B4_C - [15:0] */
+#define WM9081_EQ_B4_C_WIDTH                        16  /* EQ_B4_C - [15:0] */
+
+/*
+ * R54 (0x36) - EQ 13
+ */
+#define WM9081_EQ_B4_PG_MASK                    0xFFFF  /* EQ_B4_PG - [15:0] */
+#define WM9081_EQ_B4_PG_SHIFT                        0  /* EQ_B4_PG - [15:0] */
+#define WM9081_EQ_B4_PG_WIDTH                       16  /* EQ_B4_PG - [15:0] */
+
+/*
+ * R55 (0x37) - EQ 14
+ */
+#define WM9081_EQ_B3_A_MASK                     0xFFFF  /* EQ_B3_A - [15:0] */
+#define WM9081_EQ_B3_A_SHIFT                         0  /* EQ_B3_A - [15:0] */
+#define WM9081_EQ_B3_A_WIDTH                        16  /* EQ_B3_A - [15:0] */
+
+/*
+ * R56 (0x38) - EQ 15
+ */
+#define WM9081_EQ_B3_B_MASK                     0xFFFF  /* EQ_B3_B - [15:0] */
+#define WM9081_EQ_B3_B_SHIFT                         0  /* EQ_B3_B - [15:0] */
+#define WM9081_EQ_B3_B_WIDTH                        16  /* EQ_B3_B - [15:0] */
+
+/*
+ * R57 (0x39) - EQ 16
+ */
+#define WM9081_EQ_B3_C_MASK                     0xFFFF  /* EQ_B3_C - [15:0] */
+#define WM9081_EQ_B3_C_SHIFT                         0  /* EQ_B3_C - [15:0] */
+#define WM9081_EQ_B3_C_WIDTH                        16  /* EQ_B3_C - [15:0] */
+
+/*
+ * R58 (0x3A) - EQ 17
+ */
+#define WM9081_EQ_B3_PG_MASK                    0xFFFF  /* EQ_B3_PG - [15:0] */
+#define WM9081_EQ_B3_PG_SHIFT                        0  /* EQ_B3_PG - [15:0] */
+#define WM9081_EQ_B3_PG_WIDTH                       16  /* EQ_B3_PG - [15:0] */
+
+/*
+ * R59 (0x3B) - EQ 18
+ */
+#define WM9081_EQ_B5_A_MASK                     0xFFFF  /* EQ_B5_A - [15:0] */
+#define WM9081_EQ_B5_A_SHIFT                         0  /* EQ_B5_A - [15:0] */
+#define WM9081_EQ_B5_A_WIDTH                        16  /* EQ_B5_A - [15:0] */
+
+/*
+ * R60 (0x3C) - EQ 19
+ */
+#define WM9081_EQ_B5_B_MASK                     0xFFFF  /* EQ_B5_B - [15:0] */
+#define WM9081_EQ_B5_B_SHIFT                         0  /* EQ_B5_B - [15:0] */
+#define WM9081_EQ_B5_B_WIDTH                        16  /* EQ_B5_B - [15:0] */
+
+/*
+ * R61 (0x3D) - EQ 20
+ */
+#define WM9081_EQ_B5_PG_MASK                    0xFFFF  /* EQ_B5_PG - [15:0] */
+#define WM9081_EQ_B5_PG_SHIFT                        0  /* EQ_B5_PG - [15:0] */
+#define WM9081_EQ_B5_PG_WIDTH                       16  /* EQ_B5_PG - [15:0] */
+
+
+#endif
diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c
index c2d1a7a..fa88b46 100644
--- a/sound/soc/codecs/wm9705.c
+++ b/sound/soc/codecs/wm9705.c
@@ -282,14 +282,14 @@
 			.channels_min = 1,
 			.channels_max = 2,
 			.rates = WM9705_AC97_RATES,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.formats = SND_SOC_STD_AC97_FMTS,
 		},
 		.capture = {
 			.stream_name = "HiFi Capture",
 			.channels_min = 1,
 			.channels_max = 2,
 			.rates = WM9705_AC97_RATES,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.formats = SND_SOC_STD_AC97_FMTS,
 		},
 		.ops = &wm9705_dai_ops,
 	},
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 765cf1e..1fd4e88 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -534,13 +534,13 @@
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM9712_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.capture = {
 		.stream_name = "HiFi Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM9712_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &wm9712_dai_ops_hifi,
 },
 {
@@ -550,7 +550,7 @@
 		.channels_min = 1,
 		.channels_max = 1,
 		.rates = WM9712_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &wm9712_dai_ops_aux,
 }
 };
@@ -585,6 +585,8 @@
 	}
 
 	soc_ac97_ops.reset(codec->ac97);
+	if (soc_ac97_ops.warm_reset)
+		soc_ac97_ops.warm_reset(codec->ac97);
 	if (ac97_read(codec, 0) != wm9712_reg[0])
 		goto err;
 	return 0;
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index 523bad0..abed37a 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -189,6 +189,26 @@
 SOC_SINGLE("3D Depth", AC97_REC_GAIN_MIC, 0, 15, 1),
 };
 
+static int wm9713_voice_shutdown(struct snd_soc_dapm_widget *w,
+				 struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	u16 status, rate;
+
+	BUG_ON(event != SND_SOC_DAPM_PRE_PMD);
+
+	/* Gracefully shut down the voice interface. */
+	status = ac97_read(codec, AC97_EXTENDED_MID) | 0x1000;
+	rate = ac97_read(codec, AC97_HANDSET_RATE) & 0xF0FF;
+	ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0200);
+	schedule_timeout_interruptible(msecs_to_jiffies(1));
+	ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0F00);
+	ac97_write(codec, AC97_EXTENDED_MID, status);
+
+	return 0;
+}
+
+
 /* We have to create a fake left and right HP mixers because
  * the codec only has a single control that is shared by both channels.
  * This makes it impossible to determine the audio path using the current
@@ -400,7 +420,8 @@
 SND_SOC_DAPM_MIXER("HP Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MIXER("Line Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MIXER("Capture Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
-SND_SOC_DAPM_DAC("Voice DAC", "Voice Playback", AC97_EXTENDED_MID, 12, 1),
+SND_SOC_DAPM_DAC_E("Voice DAC", "Voice Playback", AC97_EXTENDED_MID, 12, 1,
+		   wm9713_voice_shutdown, SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_DAC("Aux DAC", "Aux Playback", AC97_EXTENDED_MID, 11, 1),
 SND_SOC_DAPM_PGA("Left ADC", AC97_EXTENDED_MID, 5, 1, NULL, 0),
 SND_SOC_DAPM_PGA("Right ADC", AC97_EXTENDED_MID, 4, 1, NULL, 0),
@@ -689,7 +710,7 @@
 	Ndiv = target / source;
 	if ((Ndiv < 5) || (Ndiv > 12))
 		printk(KERN_WARNING
-			"WM9713 PLL N value %d out of recommended range!\n",
+			"WM9713 PLL N value %u out of recommended range!\n",
 			Ndiv);
 
 	pll_div->n = Ndiv;
@@ -936,21 +957,6 @@
 	return 0;
 }
 
-static void wm9713_voiceshutdown(struct snd_pcm_substream *substream,
-				 struct snd_soc_dai *dai)
-{
-	struct snd_soc_codec *codec = dai->codec;
-	u16 status, rate;
-
-	/* Gracefully shut down the voice interface. */
-	status = ac97_read(codec, AC97_EXTENDED_STATUS) | 0x1000;
-	rate = ac97_read(codec, AC97_HANDSET_RATE) & 0xF0FF;
-	ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0200);
-	schedule_timeout_interruptible(msecs_to_jiffies(1));
-	ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0F00);
-	ac97_write(codec, AC97_EXTENDED_MID, status);
-}
-
 static int ac97_hifi_prepare(struct snd_pcm_substream *substream,
 			     struct snd_soc_dai *dai)
 {
@@ -1019,7 +1025,6 @@
 
 static struct snd_soc_dai_ops wm9713_dai_ops_voice = {
 	.hw_params	= wm9713_pcm_hw_params,
-	.shutdown	= wm9713_voiceshutdown,
 	.set_clkdiv	= wm9713_set_dai_clkdiv,
 	.set_pll	= wm9713_set_dai_pll,
 	.set_fmt	= wm9713_set_dai_fmt,
@@ -1035,13 +1040,13 @@
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM9713_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.capture = {
 		.stream_name = "HiFi Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM9713_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &wm9713_dai_ops_hifi,
 	},
 	{
@@ -1051,7 +1056,7 @@
 		.channels_min = 1,
 		.channels_max = 1,
 		.rates = WM9713_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &wm9713_dai_ops_aux,
 	},
 	{
@@ -1069,6 +1074,7 @@
 		.rates = WM9713_PCM_RATES,
 		.formats = WM9713_PCM_FORMATS,},
 	.ops = &wm9713_dai_ops_voice,
+	.symmetric_rates = 1,
 	},
 };
 EXPORT_SYMBOL_GPL(wm9713_dai);
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 9fc9082..5dbebf8 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -1,5 +1,8 @@
 config SND_SOC_OF_SIMPLE
 	tristate
+	
+config SND_MPC52xx_DMA
+	tristate
 
 # ASoC platform support for the Freescale MPC8610 SOC.  This compiles drivers
 # for the SSI and the Elo DMA controller.  You will still need to select
@@ -22,7 +25,34 @@
 config SND_SOC_MPC5200_I2S
 	tristate "Freescale MPC5200 PSC in I2S mode driver"
 	depends on PPC_MPC52xx && PPC_BESTCOMM
-	select SND_SOC_OF_SIMPLE
+	select SND_MPC52xx_DMA
 	select PPC_BESTCOMM_GEN_BD
 	help
 	  Say Y here to support the MPC5200 PSCs in I2S mode.
+
+config SND_SOC_MPC5200_AC97
+	tristate "Freescale MPC5200 PSC in AC97 mode driver"
+	depends on PPC_MPC52xx && PPC_BESTCOMM
+	select AC97_BUS
+	select SND_MPC52xx_DMA
+	select PPC_BESTCOMM_GEN_BD
+	help
+	  Say Y here to support the MPC5200 PSCs in AC97 mode.
+
+config SND_MPC52xx_SOC_PCM030
+	tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712"
+	depends on PPC_MPC5200_SIMPLE && BROKEN
+	select SND_SOC_MPC5200_AC97
+	select SND_SOC_WM9712
+	help
+	  Say Y if you want to add support for sound on the Phytec pcm030
+	  baseboard.
+
+config SND_MPC52xx_SOC_EFIKA
+	tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
+	depends on PPC_EFIKA && BROKEN
+	select SND_SOC_MPC5200_AC97
+	select SND_SOC_STAC9766
+	help
+	  Say Y if you want to add support for sound on the Efika.
+
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index f85134c..a83a739 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -10,5 +10,12 @@
 snd-soc-fsl-dma-objs := fsl_dma.o
 obj-$(CONFIG_SND_SOC_MPC8610) += snd-soc-fsl-ssi.o snd-soc-fsl-dma.o
 
+# MPC5200 Platform Support
+obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o
 obj-$(CONFIG_SND_SOC_MPC5200_I2S) += mpc5200_psc_i2s.o
+obj-$(CONFIG_SND_SOC_MPC5200_AC97) += mpc5200_psc_ac97.o
+
+# MPC5200 Machine Support
+obj-$(CONFIG_SND_MPC52xx_SOC_PCM030) += pcm030-audio-fabric.o
+obj-$(CONFIG_SND_MPC52xx_SOC_EFIKA) += efika-audio-fabric.o
 
diff --git a/sound/soc/fsl/efika-audio-fabric.c b/sound/soc/fsl/efika-audio-fabric.c
new file mode 100644
index 0000000..85b0e75
--- /dev/null
+++ b/sound/soc/fsl/efika-audio-fabric.c
@@ -0,0 +1,90 @@
+/*
+ * Efika driver for the PSC of the Freescale MPC52xx
+ * configured as AC97 interface
+ *
+ * Copyright 2008 Jon Smirl, Digispeaker
+ * Author: Jon Smirl <jonsmirl@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/soc-of-simple.h>
+
+#include "mpc5200_dma.h"
+#include "mpc5200_psc_ac97.h"
+#include "../codecs/stac9766.h"
+
+static struct snd_soc_device device;
+static struct snd_soc_card card;
+
+static struct snd_soc_dai_link efika_fabric_dai[] = {
+{
+	.name = "AC97",
+	.stream_name = "AC97 Analog",
+	.codec_dai = &stac9766_dai[STAC9766_DAI_AC97_ANALOG],
+	.cpu_dai = &psc_ac97_dai[MPC5200_AC97_NORMAL],
+},
+{
+	.name = "AC97",
+	.stream_name = "AC97 IEC958",
+	.codec_dai = &stac9766_dai[STAC9766_DAI_AC97_DIGITAL],
+	.cpu_dai = &psc_ac97_dai[MPC5200_AC97_SPDIF],
+},
+};
+
+static __init int efika_fabric_init(void)
+{
+	struct platform_device *pdev;
+	int rc;
+
+	if (!machine_is_compatible("bplan,efika"))
+		return -ENODEV;
+
+	card.platform = &mpc5200_audio_dma_platform;
+	card.name = "Efika";
+	card.dai_link = efika_fabric_dai;
+	card.num_links = ARRAY_SIZE(efika_fabric_dai);
+
+	device.card = &card;
+	device.codec_dev = &soc_codec_dev_stac9766;
+
+	pdev = platform_device_alloc("soc-audio", 1);
+	if (!pdev) {
+		pr_err("efika_fabric_init: platform_device_alloc() failed\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, &device);
+	device.dev = &pdev->dev;
+
+	rc = platform_device_add(pdev);
+	if (rc) {
+		pr_err("efika_fabric_init: platform_device_add() failed\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+module_init(efika_fabric_init);
+
+
+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
+MODULE_DESCRIPTION(DRV_NAME ": mpc5200 Efika fabric driver");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 3711d84..93f0f38 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -375,18 +375,14 @@
 		struct snd_pcm_runtime *first_runtime =
 			ssi_private->first_stream->runtime;
 
-		if (!first_runtime->rate || !first_runtime->sample_bits) {
+		if (!first_runtime->sample_bits) {
 			dev_err(substream->pcm->card->dev,
-				"set sample rate and size in %s stream first\n",
+				"set sample size in %s stream first\n",
 				substream->stream == SNDRV_PCM_STREAM_PLAYBACK
 				? "capture" : "playback");
 			return -EAGAIN;
 		}
 
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-			SNDRV_PCM_HW_PARAM_RATE,
-			first_runtime->rate, first_runtime->rate);
-
 		/* If we're in synchronous mode, then we need to constrain
 		 * the sample size as well.  We don't support independent sample
 		 * rates in asynchronous mode.
@@ -674,7 +670,7 @@
 	ssi_private->dev = ssi_info->dev;
 	ssi_private->asynchronous = ssi_info->asynchronous;
 
-	ssi_private->dev->driver_data = fsl_ssi_dai;
+	dev_set_drvdata(ssi_private->dev, fsl_ssi_dai);
 
 	/* Initialize the the device_attribute structure */
 	dev_attr->attr.name = "ssi-stats";
@@ -693,6 +689,7 @@
 	fsl_ssi_dai->name = ssi_private->name;
 	fsl_ssi_dai->id = ssi_info->id;
 	fsl_ssi_dai->dev = ssi_info->dev;
+	fsl_ssi_dai->symmetric_rates = 1;
 
 	ret = snd_soc_register_dai(fsl_ssi_dai);
 	if (ret != 0) {
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
new file mode 100644
index 0000000..efec33a
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -0,0 +1,564 @@
+/*
+ * Freescale MPC5200 PSC DMA
+ * ALSA SoC Platform driver
+ *
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ * Copyright (C) 2009 Jon Smirl, Digispeaker
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+#include <sound/soc.h>
+
+#include <sysdev/bestcomm/bestcomm.h>
+#include <sysdev/bestcomm/gen_bd.h>
+#include <asm/mpc52xx_psc.h>
+
+#include "mpc5200_dma.h"
+
+/*
+ * Interrupt handlers
+ */
+static irqreturn_t psc_dma_status_irq(int irq, void *_psc_dma)
+{
+	struct psc_dma *psc_dma = _psc_dma;
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+	u16 isr;
+
+	isr = in_be16(&regs->mpc52xx_psc_isr);
+
+	/* Playback underrun error */
+	if (psc_dma->playback.active && (isr & MPC52xx_PSC_IMR_TXEMP))
+		psc_dma->stats.underrun_count++;
+
+	/* Capture overrun error */
+	if (psc_dma->capture.active && (isr & MPC52xx_PSC_IMR_ORERR))
+		psc_dma->stats.overrun_count++;
+
+	out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * psc_dma_bcom_enqueue_next_buffer - Enqueue another audio buffer
+ * @s: pointer to stream private data structure
+ *
+ * Enqueues another audio period buffer into the bestcomm queue.
+ *
+ * Note: The routine must only be called when there is space available in
+ * the queue.  Otherwise the enqueue will fail and the audio ring buffer
+ * will get out of sync
+ */
+static void psc_dma_bcom_enqueue_next_buffer(struct psc_dma_stream *s)
+{
+	struct bcom_bd *bd;
+
+	/* Prepare and enqueue the next buffer descriptor */
+	bd = bcom_prepare_next_buffer(s->bcom_task);
+	bd->status = s->period_bytes;
+	bd->data[0] = s->period_next_pt;
+	bcom_submit_next_buffer(s->bcom_task, NULL);
+
+	/* Update for next period */
+	s->period_next_pt += s->period_bytes;
+	if (s->period_next_pt >= s->period_end)
+		s->period_next_pt = s->period_start;
+}
+
+static void psc_dma_bcom_enqueue_tx(struct psc_dma_stream *s)
+{
+	while (s->appl_ptr < s->runtime->control->appl_ptr) {
+
+		if (bcom_queue_full(s->bcom_task))
+			return;
+
+		s->appl_ptr += s->period_size;
+
+		psc_dma_bcom_enqueue_next_buffer(s);
+	}
+}
+
+/* Bestcomm DMA irq handler */
+static irqreturn_t psc_dma_bcom_irq_tx(int irq, void *_psc_dma_stream)
+{
+	struct psc_dma_stream *s = _psc_dma_stream;
+
+	spin_lock(&s->psc_dma->lock);
+	/* For each finished period, dequeue the completed period buffer
+	 * and enqueue a new one in it's place. */
+	while (bcom_buffer_done(s->bcom_task)) {
+		bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
+
+		s->period_current_pt += s->period_bytes;
+		if (s->period_current_pt >= s->period_end)
+			s->period_current_pt = s->period_start;
+	}
+	psc_dma_bcom_enqueue_tx(s);
+	spin_unlock(&s->psc_dma->lock);
+
+	/* If the stream is active, then also inform the PCM middle layer
+	 * of the period finished event. */
+	if (s->active)
+		snd_pcm_period_elapsed(s->stream);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t psc_dma_bcom_irq_rx(int irq, void *_psc_dma_stream)
+{
+	struct psc_dma_stream *s = _psc_dma_stream;
+
+	spin_lock(&s->psc_dma->lock);
+	/* For each finished period, dequeue the completed period buffer
+	 * and enqueue a new one in it's place. */
+	while (bcom_buffer_done(s->bcom_task)) {
+		bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
+
+		s->period_current_pt += s->period_bytes;
+		if (s->period_current_pt >= s->period_end)
+			s->period_current_pt = s->period_start;
+
+		psc_dma_bcom_enqueue_next_buffer(s);
+	}
+	spin_unlock(&s->psc_dma->lock);
+
+	/* If the stream is active, then also inform the PCM middle layer
+	 * of the period finished event. */
+	if (s->active)
+		snd_pcm_period_elapsed(s->stream);
+
+	return IRQ_HANDLED;
+}
+
+static int psc_dma_hw_free(struct snd_pcm_substream *substream)
+{
+	snd_pcm_set_runtime_buffer(substream, NULL);
+	return 0;
+}
+
+/**
+ * psc_dma_trigger: start and stop the DMA transfer.
+ *
+ * This function is called by ALSA to start, stop, pause, and resume the DMA
+ * transfer of data.
+ */
+static int psc_dma_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct psc_dma_stream *s;
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+	u16 imr;
+	unsigned long flags;
+	int i;
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		s = &psc_dma->capture;
+	else
+		s = &psc_dma->playback;
+
+	dev_dbg(psc_dma->dev, "psc_dma_trigger(substream=%p, cmd=%i)"
+		" stream_id=%i\n",
+		substream, cmd, substream->pstr->stream);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		s->period_bytes = frames_to_bytes(runtime,
+						  runtime->period_size);
+		s->period_start = virt_to_phys(runtime->dma_area);
+		s->period_end = s->period_start +
+				(s->period_bytes * runtime->periods);
+		s->period_next_pt = s->period_start;
+		s->period_current_pt = s->period_start;
+		s->period_size = runtime->period_size;
+		s->active = 1;
+
+		/* track appl_ptr so that we have a better chance of detecting
+		 * end of stream and not over running it.
+		 */
+		s->runtime = runtime;
+		s->appl_ptr = s->runtime->control->appl_ptr -
+				(runtime->period_size * runtime->periods);
+
+		/* Fill up the bestcomm bd queue and enable DMA.
+		 * This will begin filling the PSC's fifo.
+		 */
+		spin_lock_irqsave(&psc_dma->lock, flags);
+
+		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
+			bcom_gen_bd_rx_reset(s->bcom_task);
+			for (i = 0; i < runtime->periods; i++)
+				if (!bcom_queue_full(s->bcom_task))
+					psc_dma_bcom_enqueue_next_buffer(s);
+		} else {
+			bcom_gen_bd_tx_reset(s->bcom_task);
+			psc_dma_bcom_enqueue_tx(s);
+		}
+
+		bcom_enable(s->bcom_task);
+		spin_unlock_irqrestore(&psc_dma->lock, flags);
+
+		out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
+
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		s->active = 0;
+
+		spin_lock_irqsave(&psc_dma->lock, flags);
+		bcom_disable(s->bcom_task);
+		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+			bcom_gen_bd_rx_reset(s->bcom_task);
+		else
+			bcom_gen_bd_tx_reset(s->bcom_task);
+		spin_unlock_irqrestore(&psc_dma->lock, flags);
+
+		break;
+
+	default:
+		dev_dbg(psc_dma->dev, "invalid command\n");
+		return -EINVAL;
+	}
+
+	/* Update interrupt enable settings */
+	imr = 0;
+	if (psc_dma->playback.active)
+		imr |= MPC52xx_PSC_IMR_TXEMP;
+	if (psc_dma->capture.active)
+		imr |= MPC52xx_PSC_IMR_ORERR;
+	out_be16(&regs->isr_imr.imr, psc_dma->imr | imr);
+
+	return 0;
+}
+
+
+/* ---------------------------------------------------------------------
+ * The PSC DMA 'ASoC platform' driver
+ *
+ * Can be referenced by an 'ASoC machine' driver
+ * This driver only deals with the audio bus; it doesn't have any
+ * interaction with the attached codec
+ */
+
+static const struct snd_pcm_hardware psc_dma_hardware = {
+	.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_BATCH,
+	.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |
+		SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE,
+	.rate_min = 8000,
+	.rate_max = 48000,
+	.channels_min = 1,
+	.channels_max = 2,
+	.period_bytes_max	= 1024 * 1024,
+	.period_bytes_min	= 32,
+	.periods_min		= 2,
+	.periods_max		= 256,
+	.buffer_bytes_max	= 2 * 1024 * 1024,
+	.fifo_size		= 512,
+};
+
+static int psc_dma_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct psc_dma_stream *s;
+	int rc;
+
+	dev_dbg(psc_dma->dev, "psc_dma_open(substream=%p)\n", substream);
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		s = &psc_dma->capture;
+	else
+		s = &psc_dma->playback;
+
+	snd_soc_set_runtime_hwparams(substream, &psc_dma_hardware);
+
+	rc = snd_pcm_hw_constraint_integer(runtime,
+		SNDRV_PCM_HW_PARAM_PERIODS);
+	if (rc < 0) {
+		dev_err(substream->pcm->card->dev, "invalid buffer size\n");
+		return rc;
+	}
+
+	s->stream = substream;
+	return 0;
+}
+
+static int psc_dma_close(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct psc_dma_stream *s;
+
+	dev_dbg(psc_dma->dev, "psc_dma_close(substream=%p)\n", substream);
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		s = &psc_dma->capture;
+	else
+		s = &psc_dma->playback;
+
+	if (!psc_dma->playback.active &&
+	    !psc_dma->capture.active) {
+
+		/* Disable all interrupts and reset the PSC */
+		out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr);
+		out_8(&psc_dma->psc_regs->command, 4 << 4); /* reset error */
+	}
+	s->stream = NULL;
+	return 0;
+}
+
+static snd_pcm_uframes_t
+psc_dma_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct psc_dma_stream *s;
+	dma_addr_t count;
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		s = &psc_dma->capture;
+	else
+		s = &psc_dma->playback;
+
+	count = s->period_current_pt - s->period_start;
+
+	return bytes_to_frames(substream->runtime, count);
+}
+
+static int
+psc_dma_hw_params(struct snd_pcm_substream *substream,
+			 struct snd_pcm_hw_params *params)
+{
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+	return 0;
+}
+
+static struct snd_pcm_ops psc_dma_ops = {
+	.open		= psc_dma_open,
+	.close		= psc_dma_close,
+	.hw_free	= psc_dma_hw_free,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.pointer	= psc_dma_pointer,
+	.trigger	= psc_dma_trigger,
+	.hw_params	= psc_dma_hw_params,
+};
+
+static u64 psc_dma_dmamask = 0xffffffff;
+static int psc_dma_new(struct snd_card *card, struct snd_soc_dai *dai,
+			   struct snd_pcm *pcm)
+{
+	struct snd_soc_pcm_runtime *rtd = pcm->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	size_t size = psc_dma_hardware.buffer_bytes_max;
+	int rc = 0;
+
+	dev_dbg(rtd->socdev->dev, "psc_dma_new(card=%p, dai=%p, pcm=%p)\n",
+		card, dai, pcm);
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &psc_dma_dmamask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = 0xffffffff;
+
+	if (pcm->streams[0].substream) {
+		rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->card->dev,
+				size, &pcm->streams[0].substream->dma_buffer);
+		if (rc)
+			goto playback_alloc_err;
+	}
+
+	if (pcm->streams[1].substream) {
+		rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->card->dev,
+				size, &pcm->streams[1].substream->dma_buffer);
+		if (rc)
+			goto capture_alloc_err;
+	}
+
+	if (rtd->socdev->card->codec->ac97)
+		rtd->socdev->card->codec->ac97->private_data = psc_dma;
+
+	return 0;
+
+ capture_alloc_err:
+	if (pcm->streams[0].substream)
+		snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
+
+ playback_alloc_err:
+	dev_err(card->dev, "Cannot allocate buffer(s)\n");
+
+	return -ENOMEM;
+}
+
+static void psc_dma_free(struct snd_pcm *pcm)
+{
+	struct snd_soc_pcm_runtime *rtd = pcm->private_data;
+	struct snd_pcm_substream *substream;
+	int stream;
+
+	dev_dbg(rtd->socdev->dev, "psc_dma_free(pcm=%p)\n", pcm);
+
+	for (stream = 0; stream < 2; stream++) {
+		substream = pcm->streams[stream].substream;
+		if (substream) {
+			snd_dma_free_pages(&substream->dma_buffer);
+			substream->dma_buffer.area = NULL;
+			substream->dma_buffer.addr = 0;
+		}
+	}
+}
+
+struct snd_soc_platform mpc5200_audio_dma_platform = {
+	.name		= "mpc5200-psc-audio",
+	.pcm_ops	= &psc_dma_ops,
+	.pcm_new	= &psc_dma_new,
+	.pcm_free	= &psc_dma_free,
+};
+EXPORT_SYMBOL_GPL(mpc5200_audio_dma_platform);
+
+int mpc5200_audio_dma_create(struct of_device *op)
+{
+	phys_addr_t fifo;
+	struct psc_dma *psc_dma;
+	struct resource res;
+	int size, irq, rc;
+	const __be32 *prop;
+	void __iomem *regs;
+
+	/* Fetch the registers and IRQ of the PSC */
+	irq = irq_of_parse_and_map(op->node, 0);
+	if (of_address_to_resource(op->node, 0, &res)) {
+		dev_err(&op->dev, "Missing reg property\n");
+		return -ENODEV;
+	}
+	regs = ioremap(res.start, 1 + res.end - res.start);
+	if (!regs) {
+		dev_err(&op->dev, "Could not map registers\n");
+		return -ENODEV;
+	}
+
+	/* Allocate and initialize the driver private data */
+	psc_dma = kzalloc(sizeof *psc_dma, GFP_KERNEL);
+	if (!psc_dma) {
+		iounmap(regs);
+		return -ENOMEM;
+	}
+
+	/* Get the PSC ID */
+	prop = of_get_property(op->node, "cell-index", &size);
+	if (!prop || size < sizeof *prop)
+		return -ENODEV;
+
+	spin_lock_init(&psc_dma->lock);
+	psc_dma->id = be32_to_cpu(*prop);
+	psc_dma->irq = irq;
+	psc_dma->psc_regs = regs;
+	psc_dma->fifo_regs = regs + sizeof *psc_dma->psc_regs;
+	psc_dma->dev = &op->dev;
+	psc_dma->playback.psc_dma = psc_dma;
+	psc_dma->capture.psc_dma = psc_dma;
+	snprintf(psc_dma->name, sizeof psc_dma->name, "PSC%u", psc_dma->id);
+
+	/* Find the address of the fifo data registers and setup the
+	 * DMA tasks */
+	fifo = res.start + offsetof(struct mpc52xx_psc, buffer.buffer_32);
+	psc_dma->capture.bcom_task =
+		bcom_psc_gen_bd_rx_init(psc_dma->id, 10, fifo, 512);
+	psc_dma->playback.bcom_task =
+		bcom_psc_gen_bd_tx_init(psc_dma->id, 10, fifo);
+	if (!psc_dma->capture.bcom_task ||
+	    !psc_dma->playback.bcom_task) {
+		dev_err(&op->dev, "Could not allocate bestcomm tasks\n");
+		iounmap(regs);
+		kfree(psc_dma);
+		return -ENODEV;
+	}
+
+	/* Disable all interrupts and reset the PSC */
+	out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr);
+	 /* reset receiver */
+	out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_RST_RX);
+	 /* reset transmitter */
+	out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_RST_TX);
+	 /* reset error */
+	out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_RST_ERR_STAT);
+	 /* reset mode */
+	out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_SEL_MODE_REG_1);
+
+	/* Set up mode register;
+	 * First write: RxRdy (FIFO Alarm) generates rx FIFO irq
+	 * Second write: register Normal mode for non loopback
+	 */
+	out_8(&psc_dma->psc_regs->mode, 0);
+	out_8(&psc_dma->psc_regs->mode, 0);
+
+	/* Set the TX and RX fifo alarm thresholds */
+	out_be16(&psc_dma->fifo_regs->rfalarm, 0x100);
+	out_8(&psc_dma->fifo_regs->rfcntl, 0x4);
+	out_be16(&psc_dma->fifo_regs->tfalarm, 0x100);
+	out_8(&psc_dma->fifo_regs->tfcntl, 0x7);
+
+	/* Lookup the IRQ numbers */
+	psc_dma->playback.irq =
+		bcom_get_task_irq(psc_dma->playback.bcom_task);
+	psc_dma->capture.irq =
+		bcom_get_task_irq(psc_dma->capture.bcom_task);
+
+	rc = request_irq(psc_dma->irq, &psc_dma_status_irq, IRQF_SHARED,
+			 "psc-dma-status", psc_dma);
+	rc |= request_irq(psc_dma->capture.irq,
+			  &psc_dma_bcom_irq_rx, IRQF_SHARED,
+			  "psc-dma-capture", &psc_dma->capture);
+	rc |= request_irq(psc_dma->playback.irq,
+			  &psc_dma_bcom_irq_tx, IRQF_SHARED,
+			  "psc-dma-playback", &psc_dma->playback);
+	if (rc) {
+		free_irq(psc_dma->irq, psc_dma);
+		free_irq(psc_dma->capture.irq,
+			 &psc_dma->capture);
+		free_irq(psc_dma->playback.irq,
+			 &psc_dma->playback);
+		return -ENODEV;
+	}
+
+	/* Save what we've done so it can be found again later */
+	dev_set_drvdata(&op->dev, psc_dma);
+
+	/* Tell the ASoC OF helpers about it */
+	return snd_soc_register_platform(&mpc5200_audio_dma_platform);
+}
+EXPORT_SYMBOL_GPL(mpc5200_audio_dma_create);
+
+int mpc5200_audio_dma_destroy(struct of_device *op)
+{
+	struct psc_dma *psc_dma = dev_get_drvdata(&op->dev);
+
+	dev_dbg(&op->dev, "mpc5200_audio_dma_destroy()\n");
+
+	snd_soc_unregister_platform(&mpc5200_audio_dma_platform);
+
+	bcom_gen_bd_rx_release(psc_dma->capture.bcom_task);
+	bcom_gen_bd_tx_release(psc_dma->playback.bcom_task);
+
+	/* Release irqs */
+	free_irq(psc_dma->irq, psc_dma);
+	free_irq(psc_dma->capture.irq, &psc_dma->capture);
+	free_irq(psc_dma->playback.irq, &psc_dma->playback);
+
+	iounmap(psc_dma->psc_regs);
+	kfree(psc_dma);
+	dev_set_drvdata(&op->dev, NULL);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mpc5200_audio_dma_destroy);
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("Freescale MPC5200 PSC in DMA mode ASoC Driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/fsl/mpc5200_dma.h b/sound/soc/fsl/mpc5200_dma.h
new file mode 100644
index 0000000..2000803
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_dma.h
@@ -0,0 +1,80 @@
+/*
+ * Freescale MPC5200 Audio DMA driver
+ */
+
+#ifndef __SOUND_SOC_FSL_MPC5200_DMA_H__
+#define __SOUND_SOC_FSL_MPC5200_DMA_H__
+
+#define PSC_STREAM_NAME_LEN 32
+
+/**
+ * psc_ac97_stream - Data specific to a single stream (playback or capture)
+ * @active:		flag indicating if the stream is active
+ * @psc_dma:		pointer back to parent psc_dma data structure
+ * @bcom_task:		bestcomm task structure
+ * @irq:		irq number for bestcomm task
+ * @period_start:	physical address of start of DMA region
+ * @period_end:		physical address of end of DMA region
+ * @period_next_pt:	physical address of next DMA buffer to enqueue
+ * @period_bytes:	size of DMA period in bytes
+ */
+struct psc_dma_stream {
+	struct snd_pcm_runtime *runtime;
+	snd_pcm_uframes_t appl_ptr;
+
+	int active;
+	struct psc_dma *psc_dma;
+	struct bcom_task *bcom_task;
+	int irq;
+	struct snd_pcm_substream *stream;
+	dma_addr_t period_start;
+	dma_addr_t period_end;
+	dma_addr_t period_next_pt;
+	dma_addr_t period_current_pt;
+	int period_bytes;
+	int period_size;
+};
+
+/**
+ * psc_dma - Private driver data
+ * @name: short name for this device ("PSC0", "PSC1", etc)
+ * @psc_regs: pointer to the PSC's registers
+ * @fifo_regs: pointer to the PSC's FIFO registers
+ * @irq: IRQ of this PSC
+ * @dev: struct device pointer
+ * @dai: the CPU DAI for this device
+ * @sicr: Base value used in serial interface control register; mode is ORed
+ *        with this value.
+ * @playback: Playback stream context data
+ * @capture: Capture stream context data
+ */
+struct psc_dma {
+	char name[32];
+	struct mpc52xx_psc __iomem *psc_regs;
+	struct mpc52xx_psc_fifo __iomem *fifo_regs;
+	unsigned int irq;
+	struct device *dev;
+	spinlock_t lock;
+	u32 sicr;
+	uint sysclk;
+	int imr;
+	int id;
+	unsigned int slots;
+
+	/* per-stream data */
+	struct psc_dma_stream playback;
+	struct psc_dma_stream capture;
+
+	/* Statistics */
+	struct {
+		unsigned long overrun_count;
+		unsigned long underrun_count;
+	} stats;
+};
+
+int mpc5200_audio_dma_create(struct of_device *op);
+int mpc5200_audio_dma_destroy(struct of_device *op);
+
+extern struct snd_soc_platform mpc5200_audio_dma_platform;
+
+#endif /* __SOUND_SOC_FSL_MPC5200_DMA_H__ */
diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c
new file mode 100644
index 0000000..794a247
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_psc_ac97.c
@@ -0,0 +1,329 @@
+/*
+ * linux/sound/mpc5200-ac97.c -- AC97 support for the Freescale MPC52xx chip.
+ *
+ * Copyright (C) 2009 Jon Smirl, Digispeaker
+ * Author: Jon Smirl <jonsmirl@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/time.h>
+#include <asm/delay.h>
+#include <asm/mpc52xx_psc.h>
+
+#include "mpc5200_dma.h"
+#include "mpc5200_psc_ac97.h"
+
+#define DRV_NAME "mpc5200-psc-ac97"
+
+/* ALSA only supports a single AC97 device so static is recommend here */
+static struct psc_dma *psc_dma;
+
+static unsigned short psc_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
+{
+	int status;
+	unsigned int val;
+
+	/* Wait for command send status zero = ready */
+	status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
+				MPC52xx_PSC_SR_CMDSEND), 100, 0);
+	if (status == 0) {
+		pr_err("timeout on ac97 bus (rdy)\n");
+		return -ENODEV;
+	}
+	/* Send the read */
+	out_be32(&psc_dma->psc_regs->ac97_cmd, (1<<31) | ((reg & 0x7f) << 24));
+
+	/* Wait for the answer */
+	status = spin_event_timeout((in_be16(&psc_dma->psc_regs->sr_csr.status) &
+				MPC52xx_PSC_SR_DATA_VAL), 100, 0);
+	if (status == 0) {
+		pr_err("timeout on ac97 read (val) %x\n",
+				in_be16(&psc_dma->psc_regs->sr_csr.status));
+		return -ENODEV;
+	}
+	/* Get the data */
+	val = in_be32(&psc_dma->psc_regs->ac97_data);
+	if (((val >> 24) & 0x7f) != reg) {
+		pr_err("reg echo error on ac97 read\n");
+		return -ENODEV;
+	}
+	val = (val >> 8) & 0xffff;
+
+	return (unsigned short) val;
+}
+
+static void psc_ac97_write(struct snd_ac97 *ac97,
+				unsigned short reg, unsigned short val)
+{
+	int status;
+
+	/* Wait for command status zero = ready */
+	status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
+				MPC52xx_PSC_SR_CMDSEND), 100, 0);
+	if (status == 0) {
+		pr_err("timeout on ac97 bus (write)\n");
+		return;
+	}
+	/* Write data */
+	out_be32(&psc_dma->psc_regs->ac97_cmd,
+			((reg & 0x7f) << 24) | (val << 8));
+}
+
+static void psc_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+
+	out_be32(&regs->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_AWR);
+	udelay(3);
+	out_be32(&regs->sicr, psc_dma->sicr);
+}
+
+static void psc_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+
+	/* Do a cold reset */
+	out_8(&regs->op1, MPC52xx_PSC_OP_RES);
+	udelay(10);
+	out_8(&regs->op0, MPC52xx_PSC_OP_RES);
+	udelay(50);
+	psc_ac97_warm_reset(ac97);
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read		= psc_ac97_read,
+	.write		= psc_ac97_write,
+	.reset		= psc_ac97_cold_reset,
+	.warm_reset	= psc_ac97_warm_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+static int psc_ac97_hw_analog_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *cpu_dai)
+{
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+
+	dev_dbg(psc_dma->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
+		" periods=%i buffer_size=%i  buffer_bytes=%i channels=%i"
+		" rate=%i format=%i\n",
+		__func__, substream, params_period_size(params),
+		params_period_bytes(params), params_periods(params),
+		params_buffer_size(params), params_buffer_bytes(params),
+		params_channels(params), params_rate(params),
+		params_format(params));
+
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
+		if (params_channels(params) == 1)
+			psc_dma->slots |= 0x00000100;
+		else
+			psc_dma->slots |= 0x00000300;
+	} else {
+		if (params_channels(params) == 1)
+			psc_dma->slots |= 0x01000000;
+		else
+			psc_dma->slots |= 0x03000000;
+	}
+	out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots);
+
+	return 0;
+}
+
+static int psc_ac97_hw_digital_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *cpu_dai)
+{
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+
+	if (params_channels(params) == 1)
+		out_be32(&psc_dma->psc_regs->ac97_slots, 0x01000000);
+	else
+		out_be32(&psc_dma->psc_regs->ac97_slots, 0x03000000);
+
+	return 0;
+}
+
+static int psc_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
+							struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_STOP:
+		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+			psc_dma->slots &= 0xFFFF0000;
+		else
+			psc_dma->slots &= 0x0000FFFF;
+
+		out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots);
+		break;
+	}
+	return 0;
+}
+
+static int psc_ac97_probe(struct platform_device *pdev,
+					struct snd_soc_dai *cpu_dai)
+{
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+
+	/* Go */
+	out_8(&regs->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
+	return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * ALSA SoC Bindings
+ *
+ * - Digital Audio Interface (DAI) template
+ * - create/destroy dai hooks
+ */
+
+/**
+ * psc_ac97_dai_template: template CPU Digital Audio Interface
+ */
+static struct snd_soc_dai_ops psc_ac97_analog_ops = {
+	.hw_params	= psc_ac97_hw_analog_params,
+	.trigger	= psc_ac97_trigger,
+};
+
+static struct snd_soc_dai_ops psc_ac97_digital_ops = {
+	.hw_params	= psc_ac97_hw_digital_params,
+};
+
+struct snd_soc_dai psc_ac97_dai[] = {
+{
+	.name   = "AC97",
+	.ac97_control = 1,
+	.probe	= psc_ac97_probe,
+	.playback = {
+		.channels_min   = 1,
+		.channels_max   = 6,
+		.rates          = SNDRV_PCM_RATE_8000_48000,
+		.formats = SNDRV_PCM_FMTBIT_S32_BE,
+	},
+	.capture = {
+		.channels_min   = 1,
+		.channels_max   = 2,
+		.rates          = SNDRV_PCM_RATE_8000_48000,
+		.formats = SNDRV_PCM_FMTBIT_S32_BE,
+	},
+	.ops = &psc_ac97_analog_ops,
+},
+{
+	.name   = "SPDIF",
+	.ac97_control = 1,
+	.playback = {
+		.channels_min   = 1,
+		.channels_max   = 2,
+		.rates          = SNDRV_PCM_RATE_32000 | \
+			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE,
+	},
+	.ops = &psc_ac97_digital_ops,
+} };
+EXPORT_SYMBOL_GPL(psc_ac97_dai);
+
+
+
+/* ---------------------------------------------------------------------
+ * OF platform bus binding code:
+ * - Probe/remove operations
+ * - OF device match table
+ */
+static int __devinit psc_ac97_of_probe(struct of_device *op,
+				      const struct of_device_id *match)
+{
+	int rc, i;
+	struct snd_ac97 ac97;
+	struct mpc52xx_psc __iomem *regs;
+
+	rc = mpc5200_audio_dma_create(op);
+	if (rc != 0)
+		return rc;
+
+	for (i = 0; i < ARRAY_SIZE(psc_ac97_dai); i++)
+		psc_ac97_dai[i].dev = &op->dev;
+
+	rc = snd_soc_register_dais(psc_ac97_dai, ARRAY_SIZE(psc_ac97_dai));
+	if (rc != 0) {
+		dev_err(&op->dev, "Failed to register DAI\n");
+		return rc;
+	}
+
+	psc_dma = dev_get_drvdata(&op->dev);
+	regs = psc_dma->psc_regs;
+	ac97.private_data = psc_dma;
+
+	for (i = 0; i < ARRAY_SIZE(psc_ac97_dai); i++)
+		psc_ac97_dai[i].private_data = psc_dma;
+
+	psc_dma->imr = 0;
+	out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr);
+
+	/* Configure the serial interface mode to AC97 */
+	psc_dma->sicr = MPC52xx_PSC_SICR_SIM_AC97 | MPC52xx_PSC_SICR_ENAC97;
+	out_be32(&regs->sicr, psc_dma->sicr);
+
+	/* No slots active */
+	out_be32(&regs->ac97_slots, 0x00000000);
+
+	return 0;
+}
+
+static int __devexit psc_ac97_of_remove(struct of_device *op)
+{
+	return mpc5200_audio_dma_destroy(op);
+}
+
+/* Match table for of_platform binding */
+static struct of_device_id psc_ac97_match[] __devinitdata = {
+	{ .compatible = "fsl,mpc5200-psc-ac97", },
+	{ .compatible = "fsl,mpc5200b-psc-ac97", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, psc_ac97_match);
+
+static struct of_platform_driver psc_ac97_driver = {
+	.match_table = psc_ac97_match,
+	.probe = psc_ac97_of_probe,
+	.remove = __devexit_p(psc_ac97_of_remove),
+	.driver = {
+		.name = "mpc5200-psc-ac97",
+		.owner = THIS_MODULE,
+	},
+};
+
+/* ---------------------------------------------------------------------
+ * Module setup and teardown; simply register the of_platform driver
+ * for the PSC in AC97 mode.
+ */
+static int __init psc_ac97_init(void)
+{
+	return of_register_platform_driver(&psc_ac97_driver);
+}
+module_init(psc_ac97_init);
+
+static void __exit psc_ac97_exit(void)
+{
+	of_unregister_platform_driver(&psc_ac97_driver);
+}
+module_exit(psc_ac97_exit);
+
+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
+MODULE_DESCRIPTION("mpc5200 AC97 module");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/fsl/mpc5200_psc_ac97.h b/sound/soc/fsl/mpc5200_psc_ac97.h
new file mode 100644
index 0000000..4bc18c3
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_psc_ac97.h
@@ -0,0 +1,15 @@
+/*
+ * Freescale MPC5200 PSC in AC97 mode
+ * ALSA SoC Digital Audio Interface (DAI) driver
+ *
+ */
+
+#ifndef __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__
+#define __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__
+
+extern struct snd_soc_dai psc_ac97_dai[];
+
+#define MPC5200_AC97_NORMAL 0
+#define MPC5200_AC97_SPDIF 1
+
+#endif /* __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__ */
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
index 1111c71..ce8de90 100644
--- a/sound/soc/fsl/mpc5200_psc_i2s.c
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -3,31 +3,21 @@
  * ALSA SoC Digital Audio Interface (DAI) driver
  *
  * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ * Copyright (C) 2009 Jon Smirl, Digispeaker
  */
 
-#include <linux/init.h>
 #include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/delay.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
-#include <linux/dma-mapping.h>
 
-#include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
-#include <sound/initval.h>
 #include <sound/soc.h>
-#include <sound/soc-of-simple.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/gen_bd.h>
 #include <asm/mpc52xx_psc.h>
 
-MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
-MODULE_DESCRIPTION("Freescale MPC5200 PSC in I2S mode ASoC Driver");
-MODULE_LICENSE("GPL");
+#include "mpc5200_psc_i2s.h"
+#include "mpc5200_dma.h"
 
 /**
  * PSC_I2S_RATES: sample rates supported by the I2S
@@ -44,191 +34,17 @@
  * PSC_I2S_FORMATS: audio formats supported by the PSC I2S mode
  */
 #define PSC_I2S_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | \
-			 SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S24_BE | \
-			 SNDRV_PCM_FMTBIT_S32_BE)
-
-/**
- * psc_i2s_stream - Data specific to a single stream (playback or capture)
- * @active:		flag indicating if the stream is active
- * @psc_i2s:		pointer back to parent psc_i2s data structure
- * @bcom_task:		bestcomm task structure
- * @irq:		irq number for bestcomm task
- * @period_start:	physical address of start of DMA region
- * @period_end:		physical address of end of DMA region
- * @period_next_pt:	physical address of next DMA buffer to enqueue
- * @period_bytes:	size of DMA period in bytes
- */
-struct psc_i2s_stream {
-	int active;
-	struct psc_i2s *psc_i2s;
-	struct bcom_task *bcom_task;
-	int irq;
-	struct snd_pcm_substream *stream;
-	dma_addr_t period_start;
-	dma_addr_t period_end;
-	dma_addr_t period_next_pt;
-	dma_addr_t period_current_pt;
-	int period_bytes;
-};
-
-/**
- * psc_i2s - Private driver data
- * @name: short name for this device ("PSC0", "PSC1", etc)
- * @psc_regs: pointer to the PSC's registers
- * @fifo_regs: pointer to the PSC's FIFO registers
- * @irq: IRQ of this PSC
- * @dev: struct device pointer
- * @dai: the CPU DAI for this device
- * @sicr: Base value used in serial interface control register; mode is ORed
- *        with this value.
- * @playback: Playback stream context data
- * @capture: Capture stream context data
- */
-struct psc_i2s {
-	char name[32];
-	struct mpc52xx_psc __iomem *psc_regs;
-	struct mpc52xx_psc_fifo __iomem *fifo_regs;
-	unsigned int irq;
-	struct device *dev;
-	struct snd_soc_dai dai;
-	spinlock_t lock;
-	u32 sicr;
-
-	/* per-stream data */
-	struct psc_i2s_stream playback;
-	struct psc_i2s_stream capture;
-
-	/* Statistics */
-	struct {
-		int overrun_count;
-		int underrun_count;
-	} stats;
-};
-
-/*
- * Interrupt handlers
- */
-static irqreturn_t psc_i2s_status_irq(int irq, void *_psc_i2s)
-{
-	struct psc_i2s *psc_i2s = _psc_i2s;
-	struct mpc52xx_psc __iomem *regs = psc_i2s->psc_regs;
-	u16 isr;
-
-	isr = in_be16(&regs->mpc52xx_psc_isr);
-
-	/* Playback underrun error */
-	if (psc_i2s->playback.active && (isr & MPC52xx_PSC_IMR_TXEMP))
-		psc_i2s->stats.underrun_count++;
-
-	/* Capture overrun error */
-	if (psc_i2s->capture.active && (isr & MPC52xx_PSC_IMR_ORERR))
-		psc_i2s->stats.overrun_count++;
-
-	out_8(&regs->command, 4 << 4);	/* reset the error status */
-
-	return IRQ_HANDLED;
-}
-
-/**
- * psc_i2s_bcom_enqueue_next_buffer - Enqueue another audio buffer
- * @s: pointer to stream private data structure
- *
- * Enqueues another audio period buffer into the bestcomm queue.
- *
- * Note: The routine must only be called when there is space available in
- * the queue.  Otherwise the enqueue will fail and the audio ring buffer
- * will get out of sync
- */
-static void psc_i2s_bcom_enqueue_next_buffer(struct psc_i2s_stream *s)
-{
-	struct bcom_bd *bd;
-
-	/* Prepare and enqueue the next buffer descriptor */
-	bd = bcom_prepare_next_buffer(s->bcom_task);
-	bd->status = s->period_bytes;
-	bd->data[0] = s->period_next_pt;
-	bcom_submit_next_buffer(s->bcom_task, NULL);
-
-	/* Update for next period */
-	s->period_next_pt += s->period_bytes;
-	if (s->period_next_pt >= s->period_end)
-		s->period_next_pt = s->period_start;
-}
-
-/* Bestcomm DMA irq handler */
-static irqreturn_t psc_i2s_bcom_irq(int irq, void *_psc_i2s_stream)
-{
-	struct psc_i2s_stream *s = _psc_i2s_stream;
-
-	/* For each finished period, dequeue the completed period buffer
-	 * and enqueue a new one in it's place. */
-	while (bcom_buffer_done(s->bcom_task)) {
-		bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
-		s->period_current_pt += s->period_bytes;
-		if (s->period_current_pt >= s->period_end)
-			s->period_current_pt = s->period_start;
-		psc_i2s_bcom_enqueue_next_buffer(s);
-		bcom_enable(s->bcom_task);
-	}
-
-	/* If the stream is active, then also inform the PCM middle layer
-	 * of the period finished event. */
-	if (s->active)
-		snd_pcm_period_elapsed(s->stream);
-
-	return IRQ_HANDLED;
-}
-
-/**
- * psc_i2s_startup: create a new substream
- *
- * This is the first function called when a stream is opened.
- *
- * If this is the first stream open, then grab the IRQ and program most of
- * the PSC registers.
- */
-static int psc_i2s_startup(struct snd_pcm_substream *substream,
-			   struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	int rc;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_startup(substream=%p)\n", substream);
-
-	if (!psc_i2s->playback.active &&
-	    !psc_i2s->capture.active) {
-		/* Setup the IRQs */
-		rc = request_irq(psc_i2s->irq, &psc_i2s_status_irq, IRQF_SHARED,
-				 "psc-i2s-status", psc_i2s);
-		rc |= request_irq(psc_i2s->capture.irq,
-				  &psc_i2s_bcom_irq, IRQF_SHARED,
-				  "psc-i2s-capture", &psc_i2s->capture);
-		rc |= request_irq(psc_i2s->playback.irq,
-				  &psc_i2s_bcom_irq, IRQF_SHARED,
-				  "psc-i2s-playback", &psc_i2s->playback);
-		if (rc) {
-			free_irq(psc_i2s->irq, psc_i2s);
-			free_irq(psc_i2s->capture.irq,
-				 &psc_i2s->capture);
-			free_irq(psc_i2s->playback.irq,
-				 &psc_i2s->playback);
-			return -ENODEV;
-		}
-	}
-
-	return 0;
-}
+			 SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE)
 
 static int psc_i2s_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_pcm_hw_params *params,
 				 struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
 	u32 mode;
 
-	dev_dbg(psc_i2s->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
+	dev_dbg(psc_dma->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
 		" periods=%i buffer_size=%i  buffer_bytes=%i\n",
 		__func__, substream, params_period_size(params),
 		params_period_bytes(params), params_periods(params),
@@ -248,174 +64,14 @@
 		mode = MPC52xx_PSC_SICR_SIM_CODEC_32;
 		break;
 	default:
-		dev_dbg(psc_i2s->dev, "invalid format\n");
+		dev_dbg(psc_dma->dev, "invalid format\n");
 		return -EINVAL;
 	}
-	out_be32(&psc_i2s->psc_regs->sicr, psc_i2s->sicr | mode);
-
-	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+	out_be32(&psc_dma->psc_regs->sicr, psc_dma->sicr | mode);
 
 	return 0;
 }
 
-static int psc_i2s_hw_free(struct snd_pcm_substream *substream,
-			   struct snd_soc_dai *dai)
-{
-	snd_pcm_set_runtime_buffer(substream, NULL);
-	return 0;
-}
-
-/**
- * psc_i2s_trigger: start and stop the DMA transfer.
- *
- * This function is called by ALSA to start, stop, pause, and resume the DMA
- * transfer of data.
- */
-static int psc_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
-			   struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct psc_i2s_stream *s;
-	struct mpc52xx_psc __iomem *regs = psc_i2s->psc_regs;
-	u16 imr;
-	u8 psc_cmd;
-	unsigned long flags;
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_i2s->capture;
-	else
-		s = &psc_i2s->playback;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_trigger(substream=%p, cmd=%i)"
-		" stream_id=%i\n",
-		substream, cmd, substream->pstr->stream);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-		s->period_bytes = frames_to_bytes(runtime,
-						  runtime->period_size);
-		s->period_start = virt_to_phys(runtime->dma_area);
-		s->period_end = s->period_start +
-				(s->period_bytes * runtime->periods);
-		s->period_next_pt = s->period_start;
-		s->period_current_pt = s->period_start;
-		s->active = 1;
-
-		/* First; reset everything */
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
-			out_8(&regs->command, MPC52xx_PSC_RST_RX);
-			out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
-		} else {
-			out_8(&regs->command, MPC52xx_PSC_RST_TX);
-			out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
-		}
-
-		/* Next, fill up the bestcomm bd queue and enable DMA.
-		 * This will begin filling the PSC's fifo. */
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-			bcom_gen_bd_rx_reset(s->bcom_task);
-		else
-			bcom_gen_bd_tx_reset(s->bcom_task);
-		while (!bcom_queue_full(s->bcom_task))
-			psc_i2s_bcom_enqueue_next_buffer(s);
-		bcom_enable(s->bcom_task);
-
-		/* Due to errata in the i2s mode; need to line up enabling
-		 * the transmitter with a transition on the frame sync
-		 * line */
-
-		spin_lock_irqsave(&psc_i2s->lock, flags);
-		/* first make sure it is low */
-		while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) != 0)
-			;
-		/* then wait for the transition to high */
-		while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) == 0)
-			;
-		/* Finally, enable the PSC.
-		 * Receiver must always be enabled; even when we only want
-		 * transmit.  (see 15.3.2.3 of MPC5200B User's Guide) */
-		psc_cmd = MPC52xx_PSC_RX_ENABLE;
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			psc_cmd |= MPC52xx_PSC_TX_ENABLE;
-		out_8(&regs->command, psc_cmd);
-		spin_unlock_irqrestore(&psc_i2s->lock, flags);
-
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-		/* Turn off the PSC */
-		s->active = 0;
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
-			if (!psc_i2s->playback.active) {
-				out_8(&regs->command, 2 << 4);	/* reset rx */
-				out_8(&regs->command, 3 << 4);	/* reset tx */
-				out_8(&regs->command, 4 << 4);	/* reset err */
-			}
-		} else {
-			out_8(&regs->command, 3 << 4);	/* reset tx */
-			out_8(&regs->command, 4 << 4);	/* reset err */
-			if (!psc_i2s->capture.active)
-				out_8(&regs->command, 2 << 4);	/* reset rx */
-		}
-
-		bcom_disable(s->bcom_task);
-		while (!bcom_queue_empty(s->bcom_task))
-			bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
-
-		break;
-
-	default:
-		dev_dbg(psc_i2s->dev, "invalid command\n");
-		return -EINVAL;
-	}
-
-	/* Update interrupt enable settings */
-	imr = 0;
-	if (psc_i2s->playback.active)
-		imr |= MPC52xx_PSC_IMR_TXEMP;
-	if (psc_i2s->capture.active)
-		imr |= MPC52xx_PSC_IMR_ORERR;
-	out_be16(&regs->isr_imr.imr, imr);
-
-	return 0;
-}
-
-/**
- * psc_i2s_shutdown: shutdown the data transfer on a stream
- *
- * Shutdown the PSC if there are no other substreams open.
- */
-static void psc_i2s_shutdown(struct snd_pcm_substream *substream,
-			     struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_shutdown(substream=%p)\n", substream);
-
-	/*
-	 * If this is the last active substream, disable the PSC and release
-	 * the IRQ.
-	 */
-	if (!psc_i2s->playback.active &&
-	    !psc_i2s->capture.active) {
-
-		/* Disable all interrupts and reset the PSC */
-		out_be16(&psc_i2s->psc_regs->isr_imr.imr, 0);
-		out_8(&psc_i2s->psc_regs->command, 3 << 4); /* reset tx */
-		out_8(&psc_i2s->psc_regs->command, 2 << 4); /* reset rx */
-		out_8(&psc_i2s->psc_regs->command, 1 << 4); /* reset mode */
-		out_8(&psc_i2s->psc_regs->command, 4 << 4); /* reset error */
-
-		/* Release irqs */
-		free_irq(psc_i2s->irq, psc_i2s);
-		free_irq(psc_i2s->capture.irq, &psc_i2s->capture);
-		free_irq(psc_i2s->playback.irq, &psc_i2s->playback);
-	}
-}
-
 /**
  * psc_i2s_set_sysclk: set the clock frequency and direction
  *
@@ -433,8 +89,8 @@
 static int psc_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
 			      int clk_id, unsigned int freq, int dir)
 {
-	struct psc_i2s *psc_i2s = cpu_dai->private_data;
-	dev_dbg(psc_i2s->dev, "psc_i2s_set_sysclk(cpu_dai=%p, dir=%i)\n",
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+	dev_dbg(psc_dma->dev, "psc_i2s_set_sysclk(cpu_dai=%p, dir=%i)\n",
 				cpu_dai, dir);
 	return (dir == SND_SOC_CLOCK_IN) ? 0 : -EINVAL;
 }
@@ -452,8 +108,8 @@
  */
 static int psc_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format)
 {
-	struct psc_i2s *psc_i2s = cpu_dai->private_data;
-	dev_dbg(psc_i2s->dev, "psc_i2s_set_fmt(cpu_dai=%p, format=%i)\n",
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+	dev_dbg(psc_dma->dev, "psc_i2s_set_fmt(cpu_dai=%p, format=%i)\n",
 				cpu_dai, format);
 	return (format == SND_SOC_DAIFMT_I2S) ? 0 : -EINVAL;
 }
@@ -469,16 +125,13 @@
  * psc_i2s_dai_template: template CPU Digital Audio Interface
  */
 static struct snd_soc_dai_ops psc_i2s_dai_ops = {
-	.startup	= psc_i2s_startup,
 	.hw_params	= psc_i2s_hw_params,
-	.hw_free	= psc_i2s_hw_free,
-	.shutdown	= psc_i2s_shutdown,
-	.trigger	= psc_i2s_trigger,
 	.set_sysclk	= psc_i2s_set_sysclk,
 	.set_fmt	= psc_i2s_set_fmt,
 };
 
-static struct snd_soc_dai psc_i2s_dai_template = {
+struct snd_soc_dai psc_i2s_dai[] = {{
+	.name   = "I2S",
 	.playback = {
 		.channels_min = 2,
 		.channels_max = 2,
@@ -492,223 +145,8 @@
 		.formats = PSC_I2S_FORMATS,
 	},
 	.ops = &psc_i2s_dai_ops,
-};
-
-/* ---------------------------------------------------------------------
- * The PSC I2S 'ASoC platform' driver
- *
- * Can be referenced by an 'ASoC machine' driver
- * This driver only deals with the audio bus; it doesn't have any
- * interaction with the attached codec
- */
-
-static const struct snd_pcm_hardware psc_i2s_pcm_hardware = {
-	.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
-		SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
-		SNDRV_PCM_INFO_BATCH,
-	.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |
-		   SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE,
-	.rate_min = 8000,
-	.rate_max = 48000,
-	.channels_min = 2,
-	.channels_max = 2,
-	.period_bytes_max	= 1024 * 1024,
-	.period_bytes_min	= 32,
-	.periods_min		= 2,
-	.periods_max		= 256,
-	.buffer_bytes_max	= 2 * 1024 * 1024,
-	.fifo_size		= 0,
-};
-
-static int psc_i2s_pcm_open(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	struct psc_i2s_stream *s;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_pcm_open(substream=%p)\n", substream);
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_i2s->capture;
-	else
-		s = &psc_i2s->playback;
-
-	snd_soc_set_runtime_hwparams(substream, &psc_i2s_pcm_hardware);
-
-	s->stream = substream;
-	return 0;
-}
-
-static int psc_i2s_pcm_close(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	struct psc_i2s_stream *s;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_pcm_close(substream=%p)\n", substream);
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_i2s->capture;
-	else
-		s = &psc_i2s->playback;
-
-	s->stream = NULL;
-	return 0;
-}
-
-static snd_pcm_uframes_t
-psc_i2s_pcm_pointer(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	struct psc_i2s_stream *s;
-	dma_addr_t count;
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_i2s->capture;
-	else
-		s = &psc_i2s->playback;
-
-	count = s->period_current_pt - s->period_start;
-
-	return bytes_to_frames(substream->runtime, count);
-}
-
-static struct snd_pcm_ops psc_i2s_pcm_ops = {
-	.open		= psc_i2s_pcm_open,
-	.close		= psc_i2s_pcm_close,
-	.ioctl		= snd_pcm_lib_ioctl,
-	.pointer	= psc_i2s_pcm_pointer,
-};
-
-static u64 psc_i2s_pcm_dmamask = 0xffffffff;
-static int psc_i2s_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
-			   struct snd_pcm *pcm)
-{
-	struct snd_soc_pcm_runtime *rtd = pcm->private_data;
-	size_t size = psc_i2s_pcm_hardware.buffer_bytes_max;
-	int rc = 0;
-
-	dev_dbg(rtd->socdev->dev, "psc_i2s_pcm_new(card=%p, dai=%p, pcm=%p)\n",
-		card, dai, pcm);
-
-	if (!card->dev->dma_mask)
-		card->dev->dma_mask = &psc_i2s_pcm_dmamask;
-	if (!card->dev->coherent_dma_mask)
-		card->dev->coherent_dma_mask = 0xffffffff;
-
-	if (pcm->streams[0].substream) {
-		rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->dev, size,
-					&pcm->streams[0].substream->dma_buffer);
-		if (rc)
-			goto playback_alloc_err;
-	}
-
-	if (pcm->streams[1].substream) {
-		rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->dev, size,
-					&pcm->streams[1].substream->dma_buffer);
-		if (rc)
-			goto capture_alloc_err;
-	}
-
-	return 0;
-
- capture_alloc_err:
-	if (pcm->streams[0].substream)
-		snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
- playback_alloc_err:
-	dev_err(card->dev, "Cannot allocate buffer(s)\n");
-	return -ENOMEM;
-}
-
-static void psc_i2s_pcm_free(struct snd_pcm *pcm)
-{
-	struct snd_soc_pcm_runtime *rtd = pcm->private_data;
-	struct snd_pcm_substream *substream;
-	int stream;
-
-	dev_dbg(rtd->socdev->dev, "psc_i2s_pcm_free(pcm=%p)\n", pcm);
-
-	for (stream = 0; stream < 2; stream++) {
-		substream = pcm->streams[stream].substream;
-		if (substream) {
-			snd_dma_free_pages(&substream->dma_buffer);
-			substream->dma_buffer.area = NULL;
-			substream->dma_buffer.addr = 0;
-		}
-	}
-}
-
-struct snd_soc_platform psc_i2s_pcm_soc_platform = {
-	.name		= "mpc5200-psc-audio",
-	.pcm_ops	= &psc_i2s_pcm_ops,
-	.pcm_new	= &psc_i2s_pcm_new,
-	.pcm_free	= &psc_i2s_pcm_free,
-};
-
-/* ---------------------------------------------------------------------
- * Sysfs attributes for debugging
- */
-
-static ssize_t psc_i2s_status_show(struct device *dev,
-			   struct device_attribute *attr, char *buf)
-{
-	struct psc_i2s *psc_i2s = dev_get_drvdata(dev);
-
-	return sprintf(buf, "status=%.4x sicr=%.8x rfnum=%i rfstat=0x%.4x "
-			"tfnum=%i tfstat=0x%.4x\n",
-			in_be16(&psc_i2s->psc_regs->sr_csr.status),
-			in_be32(&psc_i2s->psc_regs->sicr),
-			in_be16(&psc_i2s->fifo_regs->rfnum) & 0x1ff,
-			in_be16(&psc_i2s->fifo_regs->rfstat),
-			in_be16(&psc_i2s->fifo_regs->tfnum) & 0x1ff,
-			in_be16(&psc_i2s->fifo_regs->tfstat));
-}
-
-static int *psc_i2s_get_stat_attr(struct psc_i2s *psc_i2s, const char *name)
-{
-	if (strcmp(name, "playback_underrun") == 0)
-		return &psc_i2s->stats.underrun_count;
-	if (strcmp(name, "capture_overrun") == 0)
-		return &psc_i2s->stats.overrun_count;
-
-	return NULL;
-}
-
-static ssize_t psc_i2s_stat_show(struct device *dev,
-				 struct device_attribute *attr, char *buf)
-{
-	struct psc_i2s *psc_i2s = dev_get_drvdata(dev);
-	int *attrib;
-
-	attrib = psc_i2s_get_stat_attr(psc_i2s, attr->attr.name);
-	if (!attrib)
-		return 0;
-
-	return sprintf(buf, "%i\n", *attrib);
-}
-
-static ssize_t psc_i2s_stat_store(struct device *dev,
-				  struct device_attribute *attr,
-				  const char *buf,
-				  size_t count)
-{
-	struct psc_i2s *psc_i2s = dev_get_drvdata(dev);
-	int *attrib;
-
-	attrib = psc_i2s_get_stat_attr(psc_i2s, attr->attr.name);
-	if (!attrib)
-		return 0;
-
-	*attrib = simple_strtoul(buf, NULL, 0);
-	return count;
-}
-
-static DEVICE_ATTR(status, 0644, psc_i2s_status_show, NULL);
-static DEVICE_ATTR(playback_underrun, 0644, psc_i2s_stat_show,
-			psc_i2s_stat_store);
-static DEVICE_ATTR(capture_overrun, 0644, psc_i2s_stat_show,
-			psc_i2s_stat_store);
+} };
+EXPORT_SYMBOL_GPL(psc_i2s_dai);
 
 /* ---------------------------------------------------------------------
  * OF platform bus binding code:
@@ -718,150 +156,65 @@
 static int __devinit psc_i2s_of_probe(struct of_device *op,
 				      const struct of_device_id *match)
 {
-	phys_addr_t fifo;
-	struct psc_i2s *psc_i2s;
-	struct resource res;
-	int size, psc_id, irq, rc;
-	const __be32 *prop;
-	void __iomem *regs;
+	int rc;
+	struct psc_dma *psc_dma;
+	struct mpc52xx_psc __iomem *regs;
 
-	dev_dbg(&op->dev, "probing psc i2s device\n");
+	rc = mpc5200_audio_dma_create(op);
+	if (rc != 0)
+		return rc;
 
-	/* Get the PSC ID */
-	prop = of_get_property(op->node, "cell-index", &size);
-	if (!prop || size < sizeof *prop)
-		return -ENODEV;
-	psc_id = be32_to_cpu(*prop);
-
-	/* Fetch the registers and IRQ of the PSC */
-	irq = irq_of_parse_and_map(op->node, 0);
-	if (of_address_to_resource(op->node, 0, &res)) {
-		dev_err(&op->dev, "Missing reg property\n");
-		return -ENODEV;
-	}
-	regs = ioremap(res.start, 1 + res.end - res.start);
-	if (!regs) {
-		dev_err(&op->dev, "Could not map registers\n");
-		return -ENODEV;
+	rc = snd_soc_register_dais(psc_i2s_dai, ARRAY_SIZE(psc_i2s_dai));
+	if (rc != 0) {
+		pr_err("Failed to register DAI\n");
+		return 0;
 	}
 
-	/* Allocate and initialize the driver private data */
-	psc_i2s = kzalloc(sizeof *psc_i2s, GFP_KERNEL);
-	if (!psc_i2s) {
-		iounmap(regs);
-		return -ENOMEM;
-	}
-	spin_lock_init(&psc_i2s->lock);
-	psc_i2s->irq = irq;
-	psc_i2s->psc_regs = regs;
-	psc_i2s->fifo_regs = regs + sizeof *psc_i2s->psc_regs;
-	psc_i2s->dev = &op->dev;
-	psc_i2s->playback.psc_i2s = psc_i2s;
-	psc_i2s->capture.psc_i2s = psc_i2s;
-	snprintf(psc_i2s->name, sizeof psc_i2s->name, "PSC%u", psc_id+1);
-
-	/* Fill out the CPU DAI structure */
-	memcpy(&psc_i2s->dai, &psc_i2s_dai_template, sizeof psc_i2s->dai);
-	psc_i2s->dai.private_data = psc_i2s;
-	psc_i2s->dai.name = psc_i2s->name;
-	psc_i2s->dai.id = psc_id;
-
-	/* Find the address of the fifo data registers and setup the
-	 * DMA tasks */
-	fifo = res.start + offsetof(struct mpc52xx_psc, buffer.buffer_32);
-	psc_i2s->capture.bcom_task =
-		bcom_psc_gen_bd_rx_init(psc_id, 10, fifo, 512);
-	psc_i2s->playback.bcom_task =
-		bcom_psc_gen_bd_tx_init(psc_id, 10, fifo);
-	if (!psc_i2s->capture.bcom_task ||
-	    !psc_i2s->playback.bcom_task) {
-		dev_err(&op->dev, "Could not allocate bestcomm tasks\n");
-		iounmap(regs);
-		kfree(psc_i2s);
-		return -ENODEV;
-	}
-
-	/* Disable all interrupts and reset the PSC */
-	out_be16(&psc_i2s->psc_regs->isr_imr.imr, 0);
-	out_8(&psc_i2s->psc_regs->command, 3 << 4); /* reset transmitter */
-	out_8(&psc_i2s->psc_regs->command, 2 << 4); /* reset receiver */
-	out_8(&psc_i2s->psc_regs->command, 1 << 4); /* reset mode */
-	out_8(&psc_i2s->psc_regs->command, 4 << 4); /* reset error */
+	psc_dma = dev_get_drvdata(&op->dev);
+	regs = psc_dma->psc_regs;
 
 	/* Configure the serial interface mode; defaulting to CODEC8 mode */
-	psc_i2s->sicr = MPC52xx_PSC_SICR_DTS1 | MPC52xx_PSC_SICR_I2S |
+	psc_dma->sicr = MPC52xx_PSC_SICR_DTS1 | MPC52xx_PSC_SICR_I2S |
 			MPC52xx_PSC_SICR_CLKPOL;
-	if (of_get_property(op->node, "fsl,cellslave", NULL))
-		psc_i2s->sicr |= MPC52xx_PSC_SICR_CELLSLAVE |
-				 MPC52xx_PSC_SICR_GENCLK;
-	out_be32(&psc_i2s->psc_regs->sicr,
-		 psc_i2s->sicr | MPC52xx_PSC_SICR_SIM_CODEC_8);
+	out_be32(&psc_dma->psc_regs->sicr,
+		 psc_dma->sicr | MPC52xx_PSC_SICR_SIM_CODEC_8);
 
 	/* Check for the codec handle.  If it is not present then we
 	 * are done */
 	if (!of_get_property(op->node, "codec-handle", NULL))
 		return 0;
 
-	/* Set up mode register;
-	 * First write: RxRdy (FIFO Alarm) generates rx FIFO irq
-	 * Second write: register Normal mode for non loopback
-	 */
-	out_8(&psc_i2s->psc_regs->mode, 0);
-	out_8(&psc_i2s->psc_regs->mode, 0);
+	/* Due to errata in the dma mode; need to line up enabling
+	 * the transmitter with a transition on the frame sync
+	 * line */
 
-	/* Set the TX and RX fifo alarm thresholds */
-	out_be16(&psc_i2s->fifo_regs->rfalarm, 0x100);
-	out_8(&psc_i2s->fifo_regs->rfcntl, 0x4);
-	out_be16(&psc_i2s->fifo_regs->tfalarm, 0x100);
-	out_8(&psc_i2s->fifo_regs->tfcntl, 0x7);
+	/* first make sure it is low */
+	while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) != 0)
+		;
+	/* then wait for the transition to high */
+	while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) == 0)
+		;
+	/* Finally, enable the PSC.
+	 * Receiver must always be enabled; even when we only want
+	 * transmit.  (see 15.3.2.3 of MPC5200B User's Guide) */
 
-	/* Lookup the IRQ numbers */
-	psc_i2s->playback.irq =
-		bcom_get_task_irq(psc_i2s->playback.bcom_task);
-	psc_i2s->capture.irq =
-		bcom_get_task_irq(psc_i2s->capture.bcom_task);
-
-	/* Save what we've done so it can be found again later */
-	dev_set_drvdata(&op->dev, psc_i2s);
-
-	/* Register the SYSFS files */
-	rc = device_create_file(psc_i2s->dev, &dev_attr_status);
-	rc |= device_create_file(psc_i2s->dev, &dev_attr_capture_overrun);
-	rc |= device_create_file(psc_i2s->dev, &dev_attr_playback_underrun);
-	if (rc)
-		dev_info(psc_i2s->dev, "error creating sysfs files\n");
-
-	snd_soc_register_platform(&psc_i2s_pcm_soc_platform);
-
-	/* Tell the ASoC OF helpers about it */
-	of_snd_soc_register_platform(&psc_i2s_pcm_soc_platform, op->node,
-				     &psc_i2s->dai);
+	/* Go */
+	out_8(&psc_dma->psc_regs->command,
+			MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
 
 	return 0;
+
 }
 
 static int __devexit psc_i2s_of_remove(struct of_device *op)
 {
-	struct psc_i2s *psc_i2s = dev_get_drvdata(&op->dev);
-
-	dev_dbg(&op->dev, "psc_i2s_remove()\n");
-
-	snd_soc_unregister_platform(&psc_i2s_pcm_soc_platform);
-
-	bcom_gen_bd_rx_release(psc_i2s->capture.bcom_task);
-	bcom_gen_bd_tx_release(psc_i2s->playback.bcom_task);
-
-	iounmap(psc_i2s->psc_regs);
-	iounmap(psc_i2s->fifo_regs);
-	kfree(psc_i2s);
-	dev_set_drvdata(&op->dev, NULL);
-
-	return 0;
+	return mpc5200_audio_dma_destroy(op);
 }
 
 /* Match table for of_platform binding */
 static struct of_device_id psc_i2s_match[] __devinitdata = {
 	{ .compatible = "fsl,mpc5200-psc-i2s", },
+	{ .compatible = "fsl,mpc5200b-psc-i2s", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, psc_i2s_match);
@@ -892,4 +245,7 @@
 }
 module_exit(psc_i2s_exit);
 
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("Freescale MPC5200 PSC in I2S mode ASoC Driver");
+MODULE_LICENSE("GPL");
 
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.h b/sound/soc/fsl/mpc5200_psc_i2s.h
new file mode 100644
index 0000000..ce55e07
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_psc_i2s.h
@@ -0,0 +1,12 @@
+/*
+ * Freescale MPC5200 PSC in I2S mode
+ * ALSA SoC Digital Audio Interface (DAI) driver
+ *
+ */
+
+#ifndef __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__
+#define __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__
+
+extern struct snd_soc_dai psc_i2s_dai[];
+
+#endif /* __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__ */
diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c
new file mode 100644
index 0000000..8766f7a
--- /dev/null
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -0,0 +1,90 @@
+/*
+ * Phytec pcm030 driver for the PSC of the Freescale MPC52xx
+ * configured as AC97 interface
+ *
+ * Copyright 2008 Jon Smirl, Digispeaker
+ * Author: Jon Smirl <jonsmirl@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/soc-of-simple.h>
+
+#include "mpc5200_dma.h"
+#include "mpc5200_psc_ac97.h"
+#include "../codecs/wm9712.h"
+
+static struct snd_soc_device device;
+static struct snd_soc_card card;
+
+static struct snd_soc_dai_link pcm030_fabric_dai[] = {
+{
+	.name = "AC97",
+	.stream_name = "AC97 Analog",
+	.codec_dai = &wm9712_dai[WM9712_DAI_AC97_HIFI],
+	.cpu_dai = &psc_ac97_dai[MPC5200_AC97_NORMAL],
+},
+{
+	.name = "AC97",
+	.stream_name = "AC97 IEC958",
+	.codec_dai = &wm9712_dai[WM9712_DAI_AC97_AUX],
+	.cpu_dai = &psc_ac97_dai[MPC5200_AC97_SPDIF],
+},
+};
+
+static __init int pcm030_fabric_init(void)
+{
+	struct platform_device *pdev;
+	int rc;
+
+	if (!machine_is_compatible("phytec,pcm030"))
+		return -ENODEV;
+
+	card.platform = &mpc5200_audio_dma_platform;
+	card.name = "pcm030";
+	card.dai_link = pcm030_fabric_dai;
+	card.num_links = ARRAY_SIZE(pcm030_fabric_dai);
+
+	device.card = &card;
+	device.codec_dev = &soc_codec_dev_wm9712;
+
+	pdev = platform_device_alloc("soc-audio", 1);
+	if (!pdev) {
+		pr_err("pcm030_fabric_init: platform_device_alloc() failed\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, &device);
+	device.dev = &pdev->dev;
+
+	rc = platform_device_add(pdev);
+	if (rc) {
+		pr_err("pcm030_fabric_init: platform_device_add() failed\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+module_init(pcm030_fabric_init);
+
+
+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
+MODULE_DESCRIPTION(DRV_NAME ": mpc5200 pcm030 fabric driver");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index 675732e..b771238 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -39,6 +39,14 @@
 	help
 	  Say Y if you want to add support for SoC audio on the omap2evm board.
 
+config SND_OMAP_SOC_OMAP3EVM
+	tristate "SoC Audio support for OMAP3EVM board"
+	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3EVM
+	select SND_OMAP_SOC_MCBSP
+	select SND_SOC_TWL4030
+	help
+	  Say Y if you want to add support for SoC audio on the omap3evm board.
+
 config SND_OMAP_SOC_SDP3430
 	tristate "SoC Audio support for Texas Instruments SDP3430"
 	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_3430SDP
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index 0c9e4ac..a37f498 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -10,6 +10,7 @@
 snd-soc-osk5912-objs := osk5912.o
 snd-soc-overo-objs := overo.o
 snd-soc-omap2evm-objs := omap2evm.o
+snd-soc-omap3evm-objs := omap3evm.o
 snd-soc-sdp3430-objs := sdp3430.o
 snd-soc-omap3pandora-objs := omap3pandora.o
 snd-soc-omap3beagle-objs := omap3beagle.o
@@ -18,6 +19,7 @@
 obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o
 obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o
 obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o
+obj-$(CONFIG_MACH_OMAP3EVM) += snd-soc-omap3evm.o
 obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 91ef179..b60b1df 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -383,10 +383,9 @@
 	clk_set_parent(sys_clkout2_src, func96m_clk);
 	clk_set_rate(sys_clkout2, 12000000);
 
-	if (gpio_request(N810_HEADSET_AMP_GPIO, "hs_amp") < 0)
-		BUG();
-	if (gpio_request(N810_SPEAKER_AMP_GPIO, "spk_amp") < 0)
-		BUG();
+	BUG_ON((gpio_request(N810_HEADSET_AMP_GPIO, "hs_amp") < 0) ||
+	       (gpio_request(N810_SPEAKER_AMP_GPIO, "spk_amp") < 0));
+
 	gpio_direction_output(N810_HEADSET_AMP_GPIO, 0);
 	gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0);
 
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 9126142..a5d46a7 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -215,8 +215,9 @@
 	struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
 	struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
 	int dma, bus_id = mcbsp_data->bus_id, id = cpu_dai->id;
-	int wlen, channels;
+	int wlen, channels, wpf;
 	unsigned long port;
+	unsigned int format;
 
 	if (cpu_class_is_omap1()) {
 		dma = omap1_dma_reqs[bus_id][substream->stream];
@@ -244,18 +245,24 @@
 		return 0;
 	}
 
-	channels = params_channels(params);
+	format = mcbsp_data->fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+	wpf = channels = params_channels(params);
 	switch (channels) {
 	case 2:
-		/* Use dual-phase frames */
-		regs->rcr2	|= RPHASE;
-		regs->xcr2	|= XPHASE;
+		if (format == SND_SOC_DAIFMT_I2S) {
+			/* Use dual-phase frames */
+			regs->rcr2	|= RPHASE;
+			regs->xcr2	|= XPHASE;
+			/* Set 1 word per (McBSP) frame for phase1 and phase2 */
+			wpf--;
+			regs->rcr2	|= RFRLEN2(wpf - 1);
+			regs->xcr2	|= XFRLEN2(wpf - 1);
+		}
 	case 1:
-		/* Set 1 word per (McBSP) frame */
-		regs->rcr2	|= RFRLEN2(1 - 1);
-		regs->rcr1	|= RFRLEN1(1 - 1);
-		regs->xcr2	|= XFRLEN2(1 - 1);
-		regs->xcr1	|= XFRLEN1(1 - 1);
+	case 4:
+		/* Set word per (McBSP) frame for phase1 */
+		regs->rcr1	|= RFRLEN1(wpf - 1);
+		regs->xcr1	|= XFRLEN1(wpf - 1);
 		break;
 	default:
 		/* Unsupported number of channels */
@@ -277,11 +284,12 @@
 	}
 
 	/* Set FS period and length in terms of bit clock periods */
-	switch (mcbsp_data->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	switch (format) {
 	case SND_SOC_DAIFMT_I2S:
-		regs->srgr2	|= FPER(wlen * 2 - 1);
+		regs->srgr2	|= FPER(wlen * channels - 1);
 		regs->srgr1	|= FWID(wlen - 1);
 		break;
+	case SND_SOC_DAIFMT_DSP_A:
 	case SND_SOC_DAIFMT_DSP_B:
 		regs->srgr2	|= FPER(wlen * channels - 1);
 		regs->srgr1	|= FWID(0);
@@ -326,6 +334,13 @@
 		regs->rcr2	|= RDATDLY(1);
 		regs->xcr2	|= XDATDLY(1);
 		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		/* 1-bit data delay */
+		regs->rcr2      |= RDATDLY(1);
+		regs->xcr2      |= XDATDLY(1);
+		/* Invert FS polarity configuration */
+		temp_fmt ^= SND_SOC_DAIFMT_NB_IF;
+		break;
 	case SND_SOC_DAIFMT_DSP_B:
 		/* 0-bit data delay */
 		regs->rcr2      |= RDATDLY(0);
@@ -492,13 +507,13 @@
 	.id = (link_id),					\
 	.playback = {						\
 		.channels_min = 1,				\
-		.channels_max = 2,				\
+		.channels_max = 4,				\
 		.rates = OMAP_MCBSP_RATES,			\
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,		\
 	},							\
 	.capture = {						\
 		.channels_min = 1,				\
-		.channels_max = 2,				\
+		.channels_max = 4,				\
 		.rates = OMAP_MCBSP_RATES,			\
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,		\
 	},							\
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 07cf7f4..6454e15 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -87,8 +87,10 @@
 	struct omap_pcm_dma_data *dma_data = rtd->dai->cpu_dai->dma_data;
 	int err = 0;
 
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
 	if (!dma_data)
-		return -ENODEV;
+		return 0;
 
 	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
 	runtime->dma_bytes = params_buffer_bytes(params);
@@ -134,6 +136,11 @@
 	struct omap_pcm_dma_data *dma_data = prtd->dma_data;
 	struct omap_dma_channel_params dma_params;
 
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
+	if (!prtd->dma_data)
+		return 0;
+
 	memset(&dma_params, 0, sizeof(dma_params));
 	/*
 	 * Note: Regardless of interface data formats supported by OMAP McBSP
diff --git a/sound/soc/omap/omap2evm.c b/sound/soc/omap/omap2evm.c
index 0c2322d..027e1a4 100644
--- a/sound/soc/omap/omap2evm.c
+++ b/sound/soc/omap/omap2evm.c
@@ -86,7 +86,7 @@
 	.name = "TWL4030",
 	.stream_name = "TWL4030",
 	.cpu_dai = &omap_mcbsp_dai[0],
-	.codec_dai = &twl4030_dai,
+	.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 	.ops = &omap2evm_ops,
 };
 
diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c
index fd24a4a..b0cff9f 100644
--- a/sound/soc/omap/omap3beagle.c
+++ b/sound/soc/omap/omap3beagle.c
@@ -41,23 +41,33 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int fmt;
 	int ret;
 
+	switch (params_channels(params)) {
+	case 2: /* Stereo I2S mode */
+		fmt =	SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF |
+			SND_SOC_DAIFMT_CBM_CFM;
+		break;
+	case 4: /* Four channel TDM mode */
+		fmt =	SND_SOC_DAIFMT_DSP_A |
+			SND_SOC_DAIFMT_IB_NF |
+			SND_SOC_DAIFMT_CBM_CFM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
 	/* Set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai,
-				  SND_SOC_DAIFMT_I2S |
-				  SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBM_CFM);
+	ret = snd_soc_dai_set_fmt(codec_dai, fmt);
 	if (ret < 0) {
 		printk(KERN_ERR "can't set codec DAI configuration\n");
 		return ret;
 	}
 
 	/* Set cpu DAI configuration */
-	ret = snd_soc_dai_set_fmt(cpu_dai,
-				  SND_SOC_DAIFMT_I2S |
-				  SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBM_CFM);
+	ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
 	if (ret < 0) {
 		printk(KERN_ERR "can't set cpu DAI configuration\n");
 		return ret;
@@ -83,7 +93,7 @@
 	.name = "TWL4030",
 	.stream_name = "TWL4030",
 	.cpu_dai = &omap_mcbsp_dai[0],
-	.codec_dai = &twl4030_dai,
+	.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 	.ops = &omap3beagle_ops,
 };
 
diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c
new file mode 100644
index 0000000..9114c26
--- /dev/null
+++ b/sound/soc/omap/omap3evm.c
@@ -0,0 +1,147 @@
+/*
+ * omap3evm.c  -- ALSA SoC support for OMAP3 EVM
+ *
+ * Author: Anuj Aggarwal <anuj.aggarwal@ti.com>
+ *
+ * Based on sound/soc/omap/beagle.c by Steve Sakoman
+ *
+ * Copyright (C) 2008 Texas Instruments, Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/twl4030.h"
+
+static int omap3evm_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret;
+
+	/* Set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai,
+				  SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "Can't set codec DAI configuration\n");
+		return ret;
+	}
+
+	/* Set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai,
+				  SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "Can't set cpu DAI configuration\n");
+		return ret;
+	}
+
+	/* Set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "Can't set codec system clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops omap3evm_ops = {
+	.hw_params = omap3evm_hw_params,
+};
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link omap3evm_dai = {
+	.name 		= "TWL4030",
+	.stream_name 	= "TWL4030",
+	.cpu_dai 	= &omap_mcbsp_dai[0],
+	.codec_dai 	= &twl4030_dai[TWL4030_DAI_HIFI],
+	.ops 		= &omap3evm_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_omap3evm = {
+	.name = "omap3evm",
+	.platform = &omap_soc_platform,
+	.dai_link = &omap3evm_dai,
+	.num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device omap3evm_snd_devdata = {
+	.card = &snd_soc_omap3evm,
+	.codec_dev = &soc_codec_dev_twl4030,
+};
+
+static struct platform_device *omap3evm_snd_device;
+
+static int __init omap3evm_soc_init(void)
+{
+	int ret;
+
+	if (!machine_is_omap3evm()) {
+		pr_err("Not OMAP3 EVM!\n");
+		return -ENODEV;
+	}
+	pr_info("OMAP3 EVM SoC init\n");
+
+	omap3evm_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!omap3evm_snd_device) {
+		printk(KERN_ERR "Platform device allocation failed\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(omap3evm_snd_device, &omap3evm_snd_devdata);
+	omap3evm_snd_devdata.dev = &omap3evm_snd_device->dev;
+	*(unsigned int *)omap3evm_dai.cpu_dai->private_data = 1;
+
+	ret = platform_device_add(omap3evm_snd_device);
+	if (ret)
+		goto err1;
+
+	return 0;
+
+err1:
+	printk(KERN_ERR "Unable to add platform device\n");
+	platform_device_put(omap3evm_snd_device);
+
+	return ret;
+}
+
+static void __exit omap3evm_soc_exit(void)
+{
+	platform_device_unregister(omap3evm_snd_device);
+}
+
+module_init(omap3evm_soc_init);
+module_exit(omap3evm_soc_exit);
+
+MODULE_AUTHOR("Anuj Aggarwal <anuj.aggarwal@ti.com>");
+MODULE_DESCRIPTION("ALSA SoC OMAP3 EVM");
+MODULE_LICENSE("GPLv2");
diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c
index fe282d4..ad219aa 100644
--- a/sound/soc/omap/omap3pandora.c
+++ b/sound/soc/omap/omap3pandora.c
@@ -228,14 +228,14 @@
 		.name = "PCM1773",
 		.stream_name = "HiFi Out",
 		.cpu_dai = &omap_mcbsp_dai[0],
-		.codec_dai = &twl4030_dai,
+		.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 		.ops = &omap3pandora_out_ops,
 		.init = omap3pandora_out_init,
 	}, {
 		.name = "TWL4030",
 		.stream_name = "Line/Mic In",
 		.cpu_dai = &omap_mcbsp_dai[1],
-		.codec_dai = &twl4030_dai,
+		.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 		.ops = &omap3pandora_in_ops,
 		.init = omap3pandora_in_init,
 	}
diff --git a/sound/soc/omap/overo.c b/sound/soc/omap/overo.c
index a72dc4e..ec4f8fd 100644
--- a/sound/soc/omap/overo.c
+++ b/sound/soc/omap/overo.c
@@ -83,7 +83,7 @@
 	.name = "TWL4030",
 	.stream_name = "TWL4030",
 	.cpu_dai = &omap_mcbsp_dai[0],
-	.codec_dai = &twl4030_dai,
+	.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 	.ops = &overo_ops,
 };
 
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c
index 10f1c86..b719e5d 100644
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
@@ -84,6 +84,49 @@
 	.hw_params = sdp3430_hw_params,
 };
 
+static int sdp3430_hw_voice_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret;
+
+	/* Set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai,
+				SND_SOC_DAIFMT_DSP_A |
+				SND_SOC_DAIFMT_IB_NF |
+				SND_SOC_DAIFMT_CBS_CFM);
+	if (ret) {
+		printk(KERN_ERR "can't set codec DAI configuration\n");
+		return ret;
+	}
+
+	/* Set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai,
+				SND_SOC_DAIFMT_DSP_A |
+				SND_SOC_DAIFMT_IB_NF |
+				SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set cpu DAI configuration\n");
+		return ret;
+	}
+
+	/* Set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+					    SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set codec system clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops sdp3430_voice_ops = {
+	.hw_params = sdp3430_hw_voice_params,
+};
+
 /* Headset jack */
 static struct snd_soc_jack hs_jack;
 
@@ -192,28 +235,58 @@
 	return ret;
 }
 
+static int sdp3430_twl4030_voice_init(struct snd_soc_codec *codec)
+{
+	unsigned short reg;
+
+	/* Enable voice interface */
+	reg = codec->read(codec, TWL4030_REG_VOICE_IF);
+	reg |= TWL4030_VIF_DIN_EN | TWL4030_VIF_DOUT_EN | TWL4030_VIF_EN;
+	codec->write(codec, TWL4030_REG_VOICE_IF, reg);
+
+	return 0;
+}
+
+
 /* Digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link sdp3430_dai = {
-	.name = "TWL4030",
-	.stream_name = "TWL4030",
-	.cpu_dai = &omap_mcbsp_dai[0],
-	.codec_dai = &twl4030_dai,
-	.init = sdp3430_twl4030_init,
-	.ops = &sdp3430_ops,
+static struct snd_soc_dai_link sdp3430_dai[] = {
+	{
+		.name = "TWL4030 I2S",
+		.stream_name = "TWL4030 Audio",
+		.cpu_dai = &omap_mcbsp_dai[0],
+		.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
+		.init = sdp3430_twl4030_init,
+		.ops = &sdp3430_ops,
+	},
+	{
+		.name = "TWL4030 PCM",
+		.stream_name = "TWL4030 Voice",
+		.cpu_dai = &omap_mcbsp_dai[1],
+		.codec_dai = &twl4030_dai[TWL4030_DAI_VOICE],
+		.init = sdp3430_twl4030_voice_init,
+		.ops = &sdp3430_voice_ops,
+	},
 };
 
 /* Audio machine driver */
 static struct snd_soc_card snd_soc_sdp3430 = {
 	.name = "SDP3430",
 	.platform = &omap_soc_platform,
-	.dai_link = &sdp3430_dai,
-	.num_links = 1,
+	.dai_link = sdp3430_dai,
+	.num_links = ARRAY_SIZE(sdp3430_dai),
+};
+
+/* twl4030 setup */
+static struct twl4030_setup_data twl4030_setup = {
+	.ramp_delay_value = 3,
+	.sysclk = 26000,
 };
 
 /* Audio subsystem */
 static struct snd_soc_device sdp3430_snd_devdata = {
 	.card = &snd_soc_sdp3430,
 	.codec_dev = &soc_codec_dev_twl4030,
+	.codec_data = &twl4030_setup,
 };
 
 static struct platform_device *sdp3430_snd_device;
@@ -236,7 +309,8 @@
 
 	platform_set_drvdata(sdp3430_snd_device, &sdp3430_snd_devdata);
 	sdp3430_snd_devdata.dev = &sdp3430_snd_device->dev;
-	*(unsigned int *)sdp3430_dai.cpu_dai->private_data = 1; /* McBSP2 */
+	*(unsigned int *)sdp3430_dai[0].cpu_dai->private_data = 1; /* McBSP2 */
+	*(unsigned int *)sdp3430_dai[1].cpu_dai->private_data = 2; /* McBSP3 */
 
 	ret = platform_device_add(sdp3430_snd_device);
 	if (ret)
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index ad8a10f..dcd163a 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -89,13 +89,13 @@
 	  Toshiba e800 PDA
 
 config SND_PXA2XX_SOC_EM_X270
-	tristate "SoC Audio support for CompuLab EM-x270"
+	tristate "SoC Audio support for CompuLab EM-x270, eXeda and CM-X300"
 	depends on SND_PXA2XX_SOC && MACH_EM_X270
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
 	  Say Y if you want to add support for SoC audio on
-	  CompuLab EM-x270.
+	  CompuLab EM-x270, eXeda and CM-X300 machines.
 
 config SND_PXA2XX_SOC_PALM27X
 	bool "SoC Audio support for Palm T|X, T5 and LifeDrive"
@@ -134,3 +134,12 @@
         help
           Say Y if you want to add support for SoC audio on the
           MIO A701.
+
+config SND_PXA2XX_SOC_IMOTE2
+       tristate "SoC Audio support for IMote 2"
+       depends on SND_PXA2XX_SOC && MACH_INTELMOTE2
+       select SND_PXA2XX_SOC_I2S
+       select SND_SOC_WM8940
+       help
+         Say Y if you want to add support for SoC audio on the
+	 IMote 2.
diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile
index 4b90c3c..6e096b4 100644
--- a/sound/soc/pxa/Makefile
+++ b/sound/soc/pxa/Makefile
@@ -22,6 +22,7 @@
 snd-soc-zylonite-objs := zylonite.o
 snd-soc-magician-objs := magician.o
 snd-soc-mioa701-objs := mioa701_wm9713.o
+snd-soc-imote2-objs := imote2.o
 
 obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o
 obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o
@@ -35,3 +36,4 @@
 obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o
 obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o
 obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o
+obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o
diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c
index 949be9c..f4756e4 100644
--- a/sound/soc/pxa/em-x270.c
+++ b/sound/soc/pxa/em-x270.c
@@ -1,7 +1,7 @@
 /*
- * em-x270.c  --  SoC audio for EM-X270
+ * SoC audio driver for EM-X270, eXeda and CM-X300
  *
- * Copyright 2007 CompuLab, Ltd.
+ * Copyright 2007, 2009 CompuLab, Ltd.
  *
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
@@ -68,7 +68,8 @@
 {
 	int ret;
 
-	if (!machine_is_em_x270())
+	if (!(machine_is_em_x270() || machine_is_exeda()
+	      || machine_is_cm_x300()))
 		return -ENODEV;
 
 	em_x270_snd_device = platform_device_alloc("soc-audio", -1);
@@ -95,5 +96,5 @@
 
 /* Module information */
 MODULE_AUTHOR("Mike Rapoport");
-MODULE_DESCRIPTION("ALSA SoC EM-X270");
+MODULE_DESCRIPTION("ALSA SoC EM-X270, eXeda and CM-X300");
 MODULE_LICENSE("GPL");
diff --git a/sound/soc/pxa/imote2.c b/sound/soc/pxa/imote2.c
new file mode 100644
index 0000000..405587a
--- /dev/null
+++ b/sound/soc/pxa/imote2.c
@@ -0,0 +1,114 @@
+
+#include <linux/module.h>
+#include <sound/soc.h>
+
+#include <asm/mach-types.h>
+
+#include "../codecs/wm8940.h"
+#include "pxa2xx-i2s.h"
+#include "pxa2xx-pcm.h"
+
+static int imote2_asoc_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int clk = 0;
+	int ret;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 48000:
+	case 96000:
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+		clk = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+				  | SND_SOC_DAIFMT_NB_NF
+				  | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* CPU should be clock master */
+	ret = snd_soc_dai_set_fmt(cpu_dai,  SND_SOC_DAIFMT_I2S
+				  | SND_SOC_DAIFMT_NB_NF
+				  | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set the I2S system clock as input (unused) */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, clk,
+		SND_SOC_CLOCK_OUT);
+
+	return ret;
+}
+
+static struct snd_soc_ops imote2_asoc_ops = {
+	.hw_params = imote2_asoc_hw_params,
+};
+
+static struct snd_soc_dai_link imote2_dai = {
+	.name = "WM8940",
+	.stream_name = "WM8940",
+	.cpu_dai = &pxa_i2s_dai,
+	.codec_dai = &wm8940_dai,
+	.ops = &imote2_asoc_ops,
+};
+
+static struct snd_soc_card snd_soc_imote2 = {
+	.name = "Imote2",
+	.platform = &pxa2xx_soc_platform,
+	.dai_link = &imote2_dai,
+	.num_links = 1,
+};
+
+static struct snd_soc_device imote2_snd_devdata = {
+	.card = &snd_soc_imote2,
+	.codec_dev = &soc_codec_dev_wm8940,
+};
+
+static struct platform_device *imote2_snd_device;
+
+static int __init imote2_asoc_init(void)
+{
+	int ret;
+
+	if (!machine_is_intelmote2())
+		return -ENODEV;
+	imote2_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!imote2_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(imote2_snd_device, &imote2_snd_devdata);
+	imote2_snd_devdata.dev = &imote2_snd_device->dev;
+	ret = platform_device_add(imote2_snd_device);
+	if (ret)
+		platform_device_put(imote2_snd_device);
+
+	return ret;
+}
+module_init(imote2_asoc_init);
+
+static void __exit imote2_asoc_exit(void)
+{
+	platform_device_unregister(imote2_snd_device);
+}
+module_exit(imote2_asoc_exit);
+
+MODULE_AUTHOR("Jonathan Cameron");
+MODULE_DESCRIPTION("ALSA SoC Imote 2");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index 0625c34..c89a3cd 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -106,7 +106,7 @@
 			/* 513156 Hz ~= _2_ * 8000 Hz * 32 (+0.23%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_16;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 1026312 Hz ~= _2_ * 8000 Hz * 64 (+0.23%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_8;
 		}
@@ -118,7 +118,7 @@
 			/* 351375 Hz ~= 11025 Hz * 32 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_4;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 702750 Hz ~= 11025 Hz * 64 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 		}
@@ -130,7 +130,7 @@
 			/* 702750 Hz ~= 22050 Hz * 32 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 1405500 Hz ~= 22050 Hz * 64 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_1;
 		}
@@ -142,7 +142,7 @@
 			/* 1405500 Hz ~= 44100 Hz * 32 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 2811000 Hz ~= 44100 Hz * 64 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_1;
 		}
@@ -154,19 +154,20 @@
 			/* 1529375 Hz ~= 48000 Hz * 32 (-0.44%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 3058750 Hz ~= 48000 Hz * 64 (-0.44%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_1;
 		}
 		break;
 	case 96000:
+	default:
 		acps = 12235000;
 		switch (width) {
 		case 16:
 			/* 3058750 Hz ~= 96000 Hz * 32 (-0.44%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_1;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 6117500 Hz ~= 96000 Hz * 64 (-0.44%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 			div4 = PXA_SSP_CLK_SCDB_1;
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 286be31..19c4540 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -50,139 +50,6 @@
 #endif
 };
 
-#define PXA2xx_SSP1_BASE	0x41000000
-#define PXA27x_SSP2_BASE	0x41700000
-#define PXA27x_SSP3_BASE	0x41900000
-#define PXA3xx_SSP4_BASE	0x41a00000
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_out = {
-	.name			= "SSP1 PCM Mono out",
-	.dev_addr		= PXA2xx_SSP1_BASE + SSDR,
-	.drcmr			= &DRCMR(14),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_in = {
-	.name			= "SSP1 PCM Mono in",
-	.dev_addr		= PXA2xx_SSP1_BASE + SSDR,
-	.drcmr			= &DRCMR(13),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_out = {
-	.name			= "SSP1 PCM Stereo out",
-	.dev_addr		= PXA2xx_SSP1_BASE + SSDR,
-	.drcmr			= &DRCMR(14),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_in = {
-	.name			= "SSP1 PCM Stereo in",
-	.dev_addr		= PXA2xx_SSP1_BASE + SSDR,
-	.drcmr			= &DRCMR(13),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_out = {
-	.name			= "SSP2 PCM Mono out",
-	.dev_addr		= PXA27x_SSP2_BASE + SSDR,
-	.drcmr			= &DRCMR(16),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_in = {
-	.name			= "SSP2 PCM Mono in",
-	.dev_addr		= PXA27x_SSP2_BASE + SSDR,
-	.drcmr			= &DRCMR(15),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_out = {
-	.name			= "SSP2 PCM Stereo out",
-	.dev_addr		= PXA27x_SSP2_BASE + SSDR,
-	.drcmr			= &DRCMR(16),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_in = {
-	.name			= "SSP2 PCM Stereo in",
-	.dev_addr		= PXA27x_SSP2_BASE + SSDR,
-	.drcmr			= &DRCMR(15),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_out = {
-	.name			= "SSP3 PCM Mono out",
-	.dev_addr		= PXA27x_SSP3_BASE + SSDR,
-	.drcmr			= &DRCMR(67),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_in = {
-	.name			= "SSP3 PCM Mono in",
-	.dev_addr		= PXA27x_SSP3_BASE + SSDR,
-	.drcmr			= &DRCMR(66),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_out = {
-	.name			= "SSP3 PCM Stereo out",
-	.dev_addr		= PXA27x_SSP3_BASE + SSDR,
-	.drcmr			= &DRCMR(67),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_in = {
-	.name			= "SSP3 PCM Stereo in",
-	.dev_addr		= PXA27x_SSP3_BASE + SSDR,
-	.drcmr			= &DRCMR(66),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_out = {
-	.name			= "SSP4 PCM Mono out",
-	.dev_addr		= PXA3xx_SSP4_BASE + SSDR,
-	.drcmr			= &DRCMR(67),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_in = {
-	.name			= "SSP4 PCM Mono in",
-	.dev_addr		= PXA3xx_SSP4_BASE + SSDR,
-	.drcmr			= &DRCMR(66),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_out = {
-	.name			= "SSP4 PCM Stereo out",
-	.dev_addr		= PXA3xx_SSP4_BASE + SSDR,
-	.drcmr			= &DRCMR(67),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_in = {
-	.name			= "SSP4 PCM Stereo in",
-	.dev_addr		= PXA3xx_SSP4_BASE + SSDR,
-	.drcmr			= &DRCMR(66),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
 static void dump_registers(struct ssp_device *ssp)
 {
 	dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
@@ -194,25 +61,33 @@
 		 ssp_read_reg(ssp, SSACD));
 }
 
-static struct pxa2xx_pcm_dma_params *ssp_dma_params[4][4] = {
-	{
-		&pxa_ssp1_pcm_mono_out, &pxa_ssp1_pcm_mono_in,
-		&pxa_ssp1_pcm_stereo_out, &pxa_ssp1_pcm_stereo_in,
-	},
-	{
-		&pxa_ssp2_pcm_mono_out, &pxa_ssp2_pcm_mono_in,
-		&pxa_ssp2_pcm_stereo_out, &pxa_ssp2_pcm_stereo_in,
-	},
-	{
-		&pxa_ssp3_pcm_mono_out, &pxa_ssp3_pcm_mono_in,
-		&pxa_ssp3_pcm_stereo_out, &pxa_ssp3_pcm_stereo_in,
-	},
-	{
-		&pxa_ssp4_pcm_mono_out, &pxa_ssp4_pcm_mono_in,
-		&pxa_ssp4_pcm_stereo_out, &pxa_ssp4_pcm_stereo_in,
-	},
+struct pxa2xx_pcm_dma_data {
+	struct pxa2xx_pcm_dma_params params;
+	char name[20];
 };
 
+static struct pxa2xx_pcm_dma_params *
+ssp_get_dma_params(struct ssp_device *ssp, int width4, int out)
+{
+	struct pxa2xx_pcm_dma_data *dma;
+
+	dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL);
+	if (dma == NULL)
+		return NULL;
+
+	snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id,
+			width4 ? "32-bit" : "16-bit", out ? "out" : "in");
+
+	dma->params.name = dma->name;
+	dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx);
+	dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) :
+				  (DCMD_INCTRGADDR | DCMD_FLOWSRC)) |
+			(width4 ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16;
+	dma->params.dev_addr = ssp->phys_base + SSDR;
+
+	return &dma->params;
+}
+
 static int pxa_ssp_startup(struct snd_pcm_substream *substream,
 			   struct snd_soc_dai *dai)
 {
@@ -227,6 +102,11 @@
 		clk_enable(priv->dev.ssp->clk);
 		ssp_disable(&priv->dev);
 	}
+
+	if (cpu_dai->dma_data) {
+		kfree(cpu_dai->dma_data);
+		cpu_dai->dma_data = NULL;
+	}
 	return ret;
 }
 
@@ -241,6 +121,11 @@
 		ssp_disable(&priv->dev);
 		clk_disable(priv->dev.ssp->clk);
 	}
+
+	if (cpu_dai->dma_data) {
+		kfree(cpu_dai->dma_data);
+		cpu_dai->dma_data = NULL;
+	}
 }
 
 #ifdef CONFIG_PM
@@ -323,7 +208,7 @@
 		~(SSCR0_ECS |  SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
 
 	dev_dbg(&ssp->pdev->dev,
-		"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %d\n",
+		"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n",
 		cpu_dai->id, clk_id, freq);
 
 	switch (clk_id) {
@@ -472,7 +357,7 @@
 			ssacd |= (0x6 << 4);
 
 			dev_dbg(&ssp->pdev->dev,
-				"Using SSACDD %x to supply %dHz\n",
+				"Using SSACDD %x to supply %uHz\n",
 				val, freq_out);
 			break;
 		}
@@ -589,7 +474,10 @@
 		case SND_SOC_DAIFMT_NB_IF:
 			break;
 		case SND_SOC_DAIFMT_IB_IF:
-			sspsp |= SSPSP_SCMODE(3);
+			sspsp |= SSPSP_SCMODE(2);
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
 			break;
 		default:
 			return -EINVAL;
@@ -606,7 +494,13 @@
 		case SND_SOC_DAIFMT_NB_NF:
 			sspsp |= SSPSP_SFRMP;
 			break;
+		case SND_SOC_DAIFMT_NB_IF:
+			break;
 		case SND_SOC_DAIFMT_IB_IF:
+			sspsp |= SSPSP_SCMODE(2);
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
 			break;
 		default:
 			return -EINVAL;
@@ -644,25 +538,23 @@
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct ssp_priv *priv = cpu_dai->private_data;
 	struct ssp_device *ssp = priv->dev.ssp;
-	int dma = 0, chn = params_channels(params);
+	int chn = params_channels(params);
 	u32 sscr0;
 	u32 sspsp;
 	int width = snd_pcm_format_physical_width(params_format(params));
 	int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf;
 
-	/* select correct DMA params */
-	if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
-		dma = 1; /* capture DMA offset is 1,3 */
+	/* generate correct DMA params */
+	if (cpu_dai->dma_data)
+		kfree(cpu_dai->dma_data);
+
 	/* Network mode with one active slot (ttsa == 1) can be used
 	 * to force 16-bit frame width on the wire (for S16_LE), even
 	 * with two channels. Use 16-bit DMA transfers for this case.
 	 */
-	if (((chn == 2) && (ttsa != 1)) || (width == 32))
-		dma += 2; /* 32-bit DMA offset is 2, 16-bit is 0 */
-
-	cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma];
-
-	dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma);
+	cpu_dai->dma_data = ssp_get_dma_params(ssp,
+			((chn == 2) && (ttsa != 1)) || (width == 32),
+			substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
 
 	/* we can only change the settings if the port is not in use */
 	if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 2f4b6e4..4743e26 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -106,10 +106,8 @@
 	if (IS_ERR(clk_i2s))
 		return PTR_ERR(clk_i2s);
 
-	if (!cpu_dai->active) {
-		SACR0 |= SACR0_RST;
+	if (!cpu_dai->active)
 		SACR0 = 0;
-	}
 
 	return 0;
 }
@@ -178,9 +176,7 @@
 
 	/* is port used by another stream */
 	if (!(SACR0 & SACR0_ENB)) {
-
 		SACR0 = 0;
-		SACR1 = 0;
 		if (pxa_i2s.master)
 			SACR0 |= SACR0_BCKD;
 
@@ -226,6 +222,10 @@
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			SACR1 &= ~SACR1_DRPL;
+		else
+			SACR1 &= ~SACR1_DREC;
 		SACR0 |= SACR0_ENB;
 		break;
 	case SNDRV_PCM_TRIGGER_RESUME:
@@ -252,21 +252,16 @@
 		SAIMR &= ~SAIMR_RFS;
 	}
 
-	if (SACR1 & (SACR1_DREC | SACR1_DRPL)) {
+	if ((SACR1 & (SACR1_DREC | SACR1_DRPL)) == (SACR1_DREC | SACR1_DRPL)) {
 		SACR0 &= ~SACR0_ENB;
 		pxa_i2s_wait();
 		clk_disable(clk_i2s);
 	}
-
-	clk_put(clk_i2s);
 }
 
 #ifdef CONFIG_PM
 static int pxa2xx_i2s_suspend(struct snd_soc_dai *dai)
 {
-	if (!dai->active)
-		return 0;
-
 	/* store registers */
 	pxa_i2s.sacr0 = SACR0;
 	pxa_i2s.sacr1 = SACR1;
@@ -281,16 +276,14 @@
 
 static int pxa2xx_i2s_resume(struct snd_soc_dai *dai)
 {
-	if (!dai->active)
-		return 0;
-
 	pxa_i2s_wait();
 
-	SACR0 = pxa_i2s.sacr0 &= ~SACR0_ENB;
+	SACR0 = pxa_i2s.sacr0 & ~SACR0_ENB;
 	SACR1 = pxa_i2s.sacr1;
 	SAIMR = pxa_i2s.saimr;
 	SADIV = pxa_i2s.sadiv;
-	SACR0 |= SACR0_ENB;
+
+	SACR0 = pxa_i2s.sacr0;
 
 	return 0;
 }
@@ -329,6 +322,7 @@
 		.rates = PXA2XX_I2S_RATES,
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
 	.ops = &pxa_i2s_dai_ops,
+	.symmetric_rates = 1,
 };
 
 EXPORT_SYMBOL_GPL(pxa_i2s_dai);
@@ -346,6 +340,19 @@
 	if (ret != 0)
 		clk_put(clk_i2s);
 
+	/*
+	 * PXA Developer's Manual:
+	 * If SACR0[ENB] is toggled in the middle of a normal operation,
+	 * the SACR0[RST] bit must also be set and cleared to reset all
+	 * I2S controller registers.
+	 */
+	SACR0 = SACR0_RST;
+	SACR0 = 0;
+	/* Make sure RPL and REC are disabled */
+	SACR1 = SACR1_DRPL | SACR1_DREC;
+	/* Along with FIFO servicing */
+	SAIMR &= ~(SAIMR_RFS | SAIMR_TFS);
+
 	return ret;
 }
 
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index 289fadf..906709e 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -345,9 +345,11 @@
 static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
-	int reg = kcontrol->private_value & 0xFF;
-	int shift = (kcontrol->private_value >> 8) & 0x0F;
-	int mask = (kcontrol->private_value >> 16) & 0xFF;
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	int reg = mc->reg;
+	int shift = mc->shift;
+	int mask = mc->max;
 
 	pr_debug("Entered %s\n", __func__);
 
@@ -358,9 +360,11 @@
 static int lm4857_set_reg(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
-	int reg = kcontrol->private_value & 0xFF;
-	int shift = (kcontrol->private_value >> 8) & 0x0F;
-	int mask = (kcontrol->private_value >> 16) & 0xFF;
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	int reg = mc->reg;
+	int shift = mc->shift;
+	int mask = mc->max;
 
 	if (((lm4857_regs[reg] >> shift) & mask) ==
 		ucontrol->value.integer.value[0])
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index ab680aa..1a28317 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -37,6 +37,20 @@
 
 #include "s3c-i2s-v2.h"
 
+#undef S3C_IIS_V2_SUPPORTED
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#define S3C_IIS_V2_SUPPORTED
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+#define S3C_IIS_V2_SUPPORTED
+#endif
+
+#ifndef S3C_IIS_V2_SUPPORTED
+#error Unsupported CPU model
+#endif
+
 #define S3C2412_I2S_DEBUG_CON 0
 
 static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai)
@@ -75,7 +89,7 @@
 
 
 /* Turn on or off the transmission path. */
-void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
+static void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
 {
 	void __iomem *regs = i2s->regs;
 	u32 fic, con, mod;
@@ -105,7 +119,9 @@
 			break;
 
 		default:
-			dev_err(i2s->dev, "TXEN: Invalid MODE in IISMOD\n");
+			dev_err(i2s->dev, "TXEN: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+			break;
 		}
 
 		writel(con, regs + S3C2412_IISCON);
@@ -132,7 +148,9 @@
 			break;
 
 		default:
-			dev_err(i2s->dev, "TXDIS: Invalid MODE in IISMOD\n");
+			dev_err(i2s->dev, "TXDIS: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+			break;
 		}
 
 		writel(mod, regs + S3C2412_IISMOD);
@@ -143,9 +161,8 @@
 	dbg_showcon(__func__, con);
 	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
 }
-EXPORT_SYMBOL_GPL(s3c2412_snd_txctrl);
 
-void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
+static void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
 {
 	void __iomem *regs = i2s->regs;
 	u32 fic, con, mod;
@@ -175,7 +192,8 @@
 			break;
 
 		default:
-			dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n");
+			dev_err(i2s->dev, "RXEN: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
 		}
 
 		writel(mod, regs + S3C2412_IISMOD);
@@ -199,7 +217,8 @@
 			break;
 
 		default:
-			dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n");
+			dev_err(i2s->dev, "RXDIS: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
 		}
 
 		writel(con, regs + S3C2412_IISCON);
@@ -209,7 +228,6 @@
 	fic = readl(regs + S3C2412_IISFIC);
 	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
 }
-EXPORT_SYMBOL_GPL(s3c2412_snd_rxctrl);
 
 /*
  * Wait for the LR signal to allow synchronisation to the L/R clock
@@ -266,7 +284,7 @@
  */
 #define IISMOD_MASTER_MASK (1 << 11)
 #define IISMOD_SLAVE (1 << 11)
-#define IISMOD_MASTER (0x0)
+#define IISMOD_MASTER (0 << 11)
 #endif
 
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -281,7 +299,7 @@
 		iismod |= IISMOD_MASTER;
 		break;
 	default:
-		pr_debug("unknwon master/slave format\n");
+		pr_err("unknwon master/slave format\n");
 		return -EINVAL;
 	}
 
@@ -298,7 +316,7 @@
 		iismod |= S3C2412_IISMOD_SDF_IIS;
 		break;
 	default:
-		pr_debug("Unknown data format\n");
+		pr_err("Unknown data format\n");
 		return -EINVAL;
 	}
 
@@ -327,6 +345,7 @@
 	iismod = readl(i2s->regs + S3C2412_IISMOD);
 	pr_debug("%s: r: IISMOD: %x\n", __func__, iismod);
 
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S8:
 		iismod |= S3C2412_IISMOD_8BIT;
@@ -335,6 +354,25 @@
 		iismod &= ~S3C2412_IISMOD_8BIT;
 		break;
 	}
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+	iismod &= ~0x606;
+	/* Sample size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		/* 8 bit sample, 16fs BCLK */
+		iismod |= 0x2004;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		/* 16 bit sample, 32fs BCLK */
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		/* 24 bit sample, 48fs BCLK */
+		iismod |= 0x4002;
+		break;
+	}
+#endif
 
 	writel(iismod, i2s->regs + S3C2412_IISMOD);
 	pr_debug("%s: w: IISMOD: %x\n", __func__, iismod);
@@ -489,6 +527,8 @@
 	unsigned int best_rate = 0;
 	unsigned int best_deviation = INT_MAX;
 
+	pr_debug("Input clock rate %ldHz\n", clkrate);
+
 	if (fstab == NULL)
 		fstab = iis_fs_tab;
 
@@ -507,7 +547,7 @@
 		actual = clkrate / (fsdiv * div);
 		deviation = actual - rate;
 
-		printk(KERN_DEBUG "%dfs: div %d => result %d, deviation %d\n",
+		printk(KERN_DEBUG "%ufs: div %u => result %u, deviation %d\n",
 		       fsdiv, div, actual, deviation);
 
 		deviation = abs(deviation);
@@ -523,7 +563,7 @@
 			break;
 	}
 
-	printk(KERN_DEBUG "best: fs=%d, div=%d, rate=%d\n",
+	printk(KERN_DEBUG "best: fs=%u, div=%u, rate=%u\n",
 	       best_fs, best_div, best_rate);
 
 	info->fs_div = best_fs;
@@ -539,12 +579,31 @@
 		    unsigned long base)
 {
 	struct device *dev = &pdev->dev;
+	unsigned int iismod;
 
 	i2s->dev = dev;
 
 	/* record our i2s structure for later use in the callbacks */
 	dai->private_data = i2s;
 
+	if (!base) {
+		struct resource *res = platform_get_resource(pdev,
+							     IORESOURCE_MEM,
+							     0);
+		if (!res) {
+			dev_err(dev, "Unable to get register resource\n");
+			return -ENXIO;
+		}
+
+		if (!request_mem_region(res->start, resource_size(res),
+					"s3c64xx-i2s-v4")) {
+			dev_err(dev, "Unable to request register region\n");
+			return -EBUSY;
+		}
+
+		base = res->start;
+	}
+
 	i2s->regs = ioremap(base, 0x100);
 	if (i2s->regs == NULL) {
 		dev_err(dev, "cannot ioremap registers\n");
@@ -560,12 +619,16 @@
 
 	clk_enable(i2s->iis_pclk);
 
+	/* Mark ourselves as in TXRX mode so we can run through our cleanup
+	 * process without warnings. */
+	iismod = readl(i2s->regs + S3C2412_IISMOD);
+	iismod |= S3C2412_IISMOD_MODE_TXRX;
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
 	s3c2412_snd_txctrl(i2s, 0);
 	s3c2412_snd_rxctrl(i2s, 0);
 
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(s3c_i2sv2_probe);
 
 #ifdef CONFIG_PM
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index b7e0b3f..168a088 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -120,7 +120,7 @@
 
 	s3c2412_i2s.iis_cclk = clk_get(&pdev->dev, "i2sclk");
 	if (s3c2412_i2s.iis_cclk == NULL) {
-		pr_debug("failed to get i2sclk clock\n");
+		pr_err("failed to get i2sclk clock\n");
 		iounmap(s3c2412_i2s.regs);
 		return -ENODEV;
 	}
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
index 33c5de7..3c06c40 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.c
@@ -108,48 +108,19 @@
 	return 0;
 }
 
-
-unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *dai)
+struct clk *s3c64xx_i2s_get_clock(struct snd_soc_dai *dai)
 {
 	struct s3c_i2sv2_info *i2s = to_info(dai);
 
-	return clk_get_rate(i2s->iis_cclk);
+	return i2s->iis_cclk;
 }
-EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clockrate);
+EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clock);
 
 static int s3c64xx_i2s_probe(struct platform_device *pdev,
 			     struct snd_soc_dai *dai)
 {
-	struct device *dev = &pdev->dev;
-	struct s3c_i2sv2_info *i2s;
-	int ret;
-
-	dev_dbg(dev, "%s: probing dai %d\n", __func__, pdev->id);
-
-	if (pdev->id < 0 || pdev->id > ARRAY_SIZE(s3c64xx_i2s)) {
-		dev_err(dev, "id %d out of range\n", pdev->id);
-		return -EINVAL;
-	}
-
-	i2s = &s3c64xx_i2s[pdev->id];
-
-	ret = s3c_i2sv2_probe(pdev, dai, i2s,
-			      pdev->id ? S3C64XX_PA_IIS1 : S3C64XX_PA_IIS0);
-	if (ret)
-		return ret;
-
-	i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id];
-	i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id];
-
-	i2s->iis_cclk = clk_get(dev, "audio-bus");
-	if (IS_ERR(i2s->iis_cclk)) {
-		dev_err(dev, "failed to get audio-bus");
-		iounmap(i2s->regs);
-		return -ENODEV;
-	}
-
 	/* configure GPIO for i2s port */
-	switch (pdev->id) {
+	switch (dai->id) {
 	case 0:
 		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
 		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
@@ -175,41 +146,122 @@
 	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
 
 #define S3C64XX_I2S_FMTS \
-	(SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE)
+	(SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
+	 SNDRV_PCM_FMTBIT_S24_LE)
 
 static struct snd_soc_dai_ops s3c64xx_i2s_dai_ops = {
 	.set_sysclk	= s3c64xx_i2s_set_sysclk,	
 };
 
-struct snd_soc_dai s3c64xx_i2s_dai = {
-	.name		= "s3c64xx-i2s",
-	.id		= 0,
-	.probe		= s3c64xx_i2s_probe,
-	.playback = {
-		.channels_min	= 2,
-		.channels_max	= 2,
-		.rates		= S3C64XX_I2S_RATES,
-		.formats	= S3C64XX_I2S_FMTS,
+struct snd_soc_dai s3c64xx_i2s_dai[] = {
+	{
+		.name		= "s3c64xx-i2s",
+		.id		= 0,
+		.probe		= s3c64xx_i2s_probe,
+		.playback = {
+			.channels_min	= 2,
+			.channels_max	= 2,
+			.rates		= S3C64XX_I2S_RATES,
+			.formats	= S3C64XX_I2S_FMTS,
+		},
+		.capture = {
+			 .channels_min	= 2,
+			 .channels_max	= 2,
+			 .rates		= S3C64XX_I2S_RATES,
+			 .formats	= S3C64XX_I2S_FMTS,
+		 },
+		.ops = &s3c64xx_i2s_dai_ops,
+		.symmetric_rates = 1,
 	},
-	.capture = {
-		.channels_min	= 2,
-		.channels_max	= 2,
-		.rates		= S3C64XX_I2S_RATES,
-		.formats	= S3C64XX_I2S_FMTS,
+	{
+		.name		= "s3c64xx-i2s",
+		.id		= 1,
+		.probe		= s3c64xx_i2s_probe,
+		.playback = {
+			.channels_min	= 2,
+			.channels_max	= 2,
+			.rates		= S3C64XX_I2S_RATES,
+			.formats	= S3C64XX_I2S_FMTS,
+		},
+		.capture = {
+			 .channels_min	= 2,
+			 .channels_max	= 2,
+			 .rates		= S3C64XX_I2S_RATES,
+			 .formats	= S3C64XX_I2S_FMTS,
+		 },
+		.ops = &s3c64xx_i2s_dai_ops,
+		.symmetric_rates = 1,
 	},
-	.ops = &s3c64xx_i2s_dai_ops,
 };
 EXPORT_SYMBOL_GPL(s3c64xx_i2s_dai);
 
+static __devinit int s3c64xx_iis_dev_probe(struct platform_device *pdev)
+{
+	struct s3c_i2sv2_info *i2s;
+	struct snd_soc_dai *dai;
+	int ret;
+
+	if (pdev->id >= ARRAY_SIZE(s3c64xx_i2s)) {
+		dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
+		return -EINVAL;
+	}
+
+	i2s = &s3c64xx_i2s[pdev->id];
+	dai = &s3c64xx_i2s_dai[pdev->id];
+	dai->dev = &pdev->dev;
+
+	i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id];
+	i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id];
+
+	i2s->iis_cclk = clk_get(&pdev->dev, "audio-bus");
+	if (IS_ERR(i2s->iis_cclk)) {
+		dev_err(&pdev->dev, "failed to get audio-bus\n");
+		ret = PTR_ERR(i2s->iis_cclk);
+		goto err;
+	}
+
+	ret = s3c_i2sv2_probe(pdev, dai, i2s, 0);
+	if (ret)
+		goto err_clk;
+
+	ret = s3c_i2sv2_register_dai(dai);
+	if (ret != 0)
+		goto err_i2sv2;
+
+	return 0;
+
+err_i2sv2:
+	/* Not implemented for I2Sv2 core yet */
+err_clk:
+	clk_put(i2s->iis_cclk);
+err:
+	return ret;
+}
+
+static __devexit int s3c64xx_iis_dev_remove(struct platform_device *pdev)
+{
+	dev_err(&pdev->dev, "Device removal not yet supported\n");
+	return 0;
+}
+
+static struct platform_driver s3c64xx_iis_driver = {
+	.probe  = s3c64xx_iis_dev_probe,
+	.remove = s3c64xx_iis_dev_remove,
+	.driver = {
+		.name = "s3c64xx-iis",
+		.owner = THIS_MODULE,
+	},
+};
+
 static int __init s3c64xx_i2s_init(void)
 {
-	return  s3c_i2sv2_register_dai(&s3c64xx_i2s_dai);
+	return platform_driver_register(&s3c64xx_iis_driver);
 }
 module_init(s3c64xx_i2s_init);
 
 static void __exit s3c64xx_i2s_exit(void)
 {
-	snd_soc_unregister_dai(&s3c64xx_i2s_dai);
+	platform_driver_unregister(&s3c64xx_iis_driver);
 }
 module_exit(s3c64xx_i2s_exit);
 
@@ -217,6 +269,3 @@
 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
 MODULE_DESCRIPTION("S3C64XX I2S SoC Interface");
 MODULE_LICENSE("GPL");
-
-
-
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.h b/sound/soc/s3c24xx/s3c64xx-i2s.h
index b7ffe3c..02148ce 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.h
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.h
@@ -15,6 +15,8 @@
 #ifndef __SND_SOC_S3C24XX_S3C64XX_I2S_H
 #define __SND_SOC_S3C24XX_S3C64XX_I2S_H __FILE__
 
+struct clk;
+
 #include "s3c-i2s-v2.h"
 
 #define S3C64XX_DIV_BCLK	S3C_I2SV2_DIV_BCLK
@@ -24,8 +26,8 @@
 #define S3C64XX_CLKSRC_PCLK	(0)
 #define S3C64XX_CLKSRC_MUX	(1)
 
-extern struct snd_soc_dai s3c64xx_i2s_dai;
+extern struct snd_soc_dai s3c64xx_i2s_dai[];
 
-extern unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *cpu_dai);
+extern struct clk *s3c64xx_i2s_get_clock(struct snd_soc_dai *dai);
 
 #endif /* __SND_SOC_S3C24XX_S3C64XX_I2S_H */
diff --git a/sound/soc/s6000/Kconfig b/sound/soc/s6000/Kconfig
new file mode 100644
index 0000000..c74eb3d
--- /dev/null
+++ b/sound/soc/s6000/Kconfig
@@ -0,0 +1,19 @@
+config SND_S6000_SOC
+	tristate "SoC Audio for the Stretch s6000 family"
+	depends on XTENSA_VARIANT_S6000
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  s6000 family chips. You will also need to select the platform
+	  to support below.
+
+config SND_S6000_SOC_I2S
+	tristate
+
+config SND_S6000_SOC_S6IPCAM
+	tristate "SoC Audio support for Stretch 6105 IP Camera"
+	depends on SND_S6000_SOC && XTENSA_PLATFORM_S6105
+	select SND_S6000_SOC_I2S
+	select SND_SOC_TLV320AIC3X
+	help
+	  Say Y if you want to add support for SoC audio on the
+	  Stretch s6105 IP Camera Reference Design.
diff --git a/sound/soc/s6000/Makefile b/sound/soc/s6000/Makefile
new file mode 100644
index 0000000..7a61361
--- /dev/null
+++ b/sound/soc/s6000/Makefile
@@ -0,0 +1,11 @@
+# s6000 Platform Support
+snd-soc-s6000-objs := s6000-pcm.o
+snd-soc-s6000-i2s-objs := s6000-i2s.o
+
+obj-$(CONFIG_SND_S6000_SOC) += snd-soc-s6000.o
+obj-$(CONFIG_SND_S6000_SOC_I2S) += snd-soc-s6000-i2s.o
+
+# s6105 Machine Support
+snd-soc-s6ipcam-objs := s6105-ipcam.o
+
+obj-$(CONFIG_SND_S6000_SOC_S6IPCAM) += snd-soc-s6ipcam.o
diff --git a/sound/soc/s6000/s6000-i2s.c b/sound/soc/s6000/s6000-i2s.c
new file mode 100644
index 0000000..c5cda18
--- /dev/null
+++ b/sound/soc/s6000/s6000-i2s.c
@@ -0,0 +1,629 @@
+/*
+ * ALSA SoC I2S Audio Layer for the Stretch S6000 family
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "s6000-i2s.h"
+#include "s6000-pcm.h"
+
+struct s6000_i2s_dev {
+	dma_addr_t sifbase;
+	u8 __iomem *scbbase;
+	unsigned int wide;
+	unsigned int channel_in;
+	unsigned int channel_out;
+	unsigned int lines_in;
+	unsigned int lines_out;
+	struct s6000_pcm_dma_params dma_params;
+};
+
+#define S6_I2S_INTERRUPT_STATUS	0x00
+#define   S6_I2S_INT_OVERRUN	1
+#define   S6_I2S_INT_UNDERRUN	2
+#define   S6_I2S_INT_ALIGNMENT	4
+#define S6_I2S_INTERRUPT_ENABLE	0x04
+#define S6_I2S_INTERRUPT_RAW	0x08
+#define S6_I2S_INTERRUPT_CLEAR	0x0C
+#define S6_I2S_INTERRUPT_SET	0x10
+#define S6_I2S_MODE		0x20
+#define   S6_I2S_DUAL		0
+#define   S6_I2S_WIDE		1
+#define S6_I2S_TX_DEFAULT	0x24
+#define S6_I2S_DATA_CFG(c)	(0x40 + 0x10 * (c))
+#define   S6_I2S_IN		0
+#define   S6_I2S_OUT		1
+#define   S6_I2S_UNUSED		2
+#define S6_I2S_INTERFACE_CFG(c)	(0x44 + 0x10 * (c))
+#define   S6_I2S_DIV_MASK	0x001fff
+#define   S6_I2S_16BIT		0x000000
+#define   S6_I2S_20BIT		0x002000
+#define   S6_I2S_24BIT		0x004000
+#define   S6_I2S_32BIT		0x006000
+#define   S6_I2S_BITS_MASK	0x006000
+#define   S6_I2S_MEM_16BIT	0x000000
+#define   S6_I2S_MEM_32BIT	0x008000
+#define   S6_I2S_MEM_MASK	0x008000
+#define   S6_I2S_CHANNELS_SHIFT	16
+#define   S6_I2S_CHANNELS_MASK	0x030000
+#define   S6_I2S_SCK_IN		0x000000
+#define   S6_I2S_SCK_OUT	0x040000
+#define   S6_I2S_SCK_DIR	0x040000
+#define   S6_I2S_WS_IN		0x000000
+#define   S6_I2S_WS_OUT		0x080000
+#define   S6_I2S_WS_DIR		0x080000
+#define   S6_I2S_LEFT_FIRST	0x000000
+#define   S6_I2S_RIGHT_FIRST	0x100000
+#define   S6_I2S_FIRST		0x100000
+#define   S6_I2S_CUR_SCK	0x200000
+#define   S6_I2S_CUR_WS		0x400000
+#define S6_I2S_ENABLE(c)	(0x48 + 0x10 * (c))
+#define   S6_I2S_DISABLE_IF	0x02
+#define   S6_I2S_ENABLE_IF	0x03
+#define   S6_I2S_IS_BUSY	0x04
+#define   S6_I2S_DMA_ACTIVE	0x08
+#define   S6_I2S_IS_ENABLED	0x10
+
+#define S6_I2S_NUM_LINES	4
+
+#define S6_I2S_SIF_PORT0	0x0000000
+#define S6_I2S_SIF_PORT1	0x0000080 /* docs say 0x0000010 */
+
+static inline void s6_i2s_write_reg(struct s6000_i2s_dev *dev, int reg, u32 val)
+{
+	writel(val, dev->scbbase + reg);
+}
+
+static inline u32 s6_i2s_read_reg(struct s6000_i2s_dev *dev, int reg)
+{
+	return readl(dev->scbbase + reg);
+}
+
+static inline void s6_i2s_mod_reg(struct s6000_i2s_dev *dev, int reg,
+				  u32 mask, u32 val)
+{
+	val ^= s6_i2s_read_reg(dev, reg) & ~mask;
+	s6_i2s_write_reg(dev, reg, val);
+}
+
+static void s6000_i2s_start_channel(struct s6000_i2s_dev *dev, int channel)
+{
+	int i, j, cur, prev;
+
+	/*
+	 * Wait for WCLK to toggle 5 times before enabling the channel
+	 * s6000 Family Datasheet 3.6.4:
+	 *   "At least two cycles of WS must occur between commands
+	 *    to disable or enable the interface"
+	 */
+	j = 0;
+	prev = ~S6_I2S_CUR_WS;
+	for (i = 1000000; --i && j < 6; ) {
+		cur = s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(channel))
+		       & S6_I2S_CUR_WS;
+		if (prev != cur) {
+			prev = cur;
+			j++;
+		}
+	}
+	if (j < 6)
+		printk(KERN_WARNING "s6000-i2s: timeout waiting for WCLK\n");
+
+	s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_ENABLE_IF);
+}
+
+static void s6000_i2s_stop_channel(struct s6000_i2s_dev *dev, int channel)
+{
+	s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_DISABLE_IF);
+}
+
+static void s6000_i2s_start(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s6000_i2s_dev *dev = rtd->dai->cpu_dai->private_data;
+	int channel;
+
+	channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			dev->channel_out : dev->channel_in;
+
+	s6000_i2s_start_channel(dev, channel);
+}
+
+static void s6000_i2s_stop(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s6000_i2s_dev *dev = rtd->dai->cpu_dai->private_data;
+	int channel;
+
+	channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			dev->channel_out : dev->channel_in;
+
+	s6000_i2s_stop_channel(dev, channel);
+}
+
+static int s6000_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+			     int after)
+{
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if ((substream->stream == SNDRV_PCM_STREAM_CAPTURE) ^ !after)
+			s6000_i2s_start(substream);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		if (!after)
+			s6000_i2s_stop(substream);
+	}
+	return 0;
+}
+
+static unsigned int s6000_i2s_int_sources(struct s6000_i2s_dev *dev)
+{
+	unsigned int pending;
+	pending = s6_i2s_read_reg(dev, S6_I2S_INTERRUPT_RAW);
+	pending &= S6_I2S_INT_ALIGNMENT |
+		   S6_I2S_INT_UNDERRUN |
+		   S6_I2S_INT_OVERRUN;
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR, pending);
+
+	return pending;
+}
+
+static unsigned int s6000_i2s_check_xrun(struct snd_soc_dai *cpu_dai)
+{
+	struct s6000_i2s_dev *dev = cpu_dai->private_data;
+	unsigned int errors;
+	unsigned int ret;
+
+	errors = s6000_i2s_int_sources(dev);
+	if (likely(!errors))
+		return 0;
+
+	ret = 0;
+	if (errors & S6_I2S_INT_ALIGNMENT)
+		printk(KERN_ERR "s6000-i2s: WCLK misaligned\n");
+	if (errors & S6_I2S_INT_UNDERRUN)
+		ret |= 1 << SNDRV_PCM_STREAM_PLAYBACK;
+	if (errors & S6_I2S_INT_OVERRUN)
+		ret |= 1 << SNDRV_PCM_STREAM_CAPTURE;
+	return ret;
+}
+
+static void s6000_i2s_wait_disabled(struct s6000_i2s_dev *dev)
+{
+	int channel;
+	int n = 50;
+	for (channel = 0; channel < 2; channel++) {
+		while (--n >= 0) {
+			int v = s6_i2s_read_reg(dev, S6_I2S_ENABLE(channel));
+			if ((v & S6_I2S_IS_ENABLED)
+			    || !(v & (S6_I2S_DMA_ACTIVE | S6_I2S_IS_BUSY)))
+				break;
+			udelay(20);
+		}
+	}
+	if (n < 0)
+		printk(KERN_WARNING "s6000-i2s: timeout disabling interfaces");
+}
+
+static int s6000_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+				   unsigned int fmt)
+{
+	struct s6000_i2s_dev *dev = cpu_dai->private_data;
+	u32 w;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		w = S6_I2S_SCK_IN | S6_I2S_WS_IN;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+		w = S6_I2S_SCK_OUT | S6_I2S_WS_IN;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		w = S6_I2S_SCK_IN | S6_I2S_WS_OUT;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		w = S6_I2S_SCK_OUT | S6_I2S_WS_OUT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		w |= S6_I2S_LEFT_FIRST;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		w |= S6_I2S_RIGHT_FIRST;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(0),
+		       S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
+	s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(1),
+		       S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
+
+	return 0;
+}
+
+static int s6000_i2s_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
+{
+	struct s6000_i2s_dev *dev = dai->private_data;
+
+	if (!div || (div & 1) || div > (S6_I2S_DIV_MASK + 1) * 2)
+		return -EINVAL;
+
+	s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(div_id),
+		       S6_I2S_DIV_MASK, div / 2 - 1);
+	return 0;
+}
+
+static int s6000_i2s_hw_params(struct snd_pcm_substream *substream,
+			       struct snd_pcm_hw_params *params,
+			       struct snd_soc_dai *dai)
+{
+	struct s6000_i2s_dev *dev = dai->private_data;
+	int interf;
+	u32 w = 0;
+
+	if (dev->wide)
+		interf = 0;
+	else {
+		w |= (((params_channels(params) - 2) / 2)
+		      << S6_I2S_CHANNELS_SHIFT) & S6_I2S_CHANNELS_MASK;
+		interf = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+				? dev->channel_out : dev->channel_in;
+	}
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		w |= S6_I2S_16BIT | S6_I2S_MEM_16BIT;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		w |= S6_I2S_32BIT | S6_I2S_MEM_32BIT;
+		break;
+	default:
+		printk(KERN_WARNING "s6000-i2s: unsupported PCM format %x\n",
+		       params_format(params));
+		return -EINVAL;
+	}
+
+	if (s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(interf))
+	     & S6_I2S_IS_ENABLED) {
+		printk(KERN_ERR "s6000-i2s: interface already enabled\n");
+		return -EBUSY;
+	}
+
+	s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(interf),
+		       S6_I2S_CHANNELS_MASK|S6_I2S_MEM_MASK|S6_I2S_BITS_MASK,
+		       w);
+
+	return 0;
+}
+
+static int s6000_i2s_dai_probe(struct platform_device *pdev,
+			       struct snd_soc_dai *dai)
+{
+	struct s6000_i2s_dev *dev = dai->private_data;
+	struct s6000_snd_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		return -EINVAL;
+
+	dev->wide = pdata->wide;
+	dev->channel_in = pdata->channel_in;
+	dev->channel_out = pdata->channel_out;
+	dev->lines_in = pdata->lines_in;
+	dev->lines_out = pdata->lines_out;
+
+	s6_i2s_write_reg(dev, S6_I2S_MODE,
+			 dev->wide ? S6_I2S_WIDE : S6_I2S_DUAL);
+
+	if (dev->wide) {
+		int i;
+
+		if (dev->lines_in + dev->lines_out > S6_I2S_NUM_LINES)
+			return -EINVAL;
+
+		dev->channel_in = 0;
+		dev->channel_out = 1;
+		dai->capture.channels_min = 2 * dev->lines_in;
+		dai->capture.channels_max = dai->capture.channels_min;
+		dai->playback.channels_min = 2 * dev->lines_out;
+		dai->playback.channels_max = dai->playback.channels_min;
+
+		for (i = 0; i < dev->lines_out; i++)
+			s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_OUT);
+
+		for (; i < S6_I2S_NUM_LINES - dev->lines_in; i++)
+			s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i),
+					 S6_I2S_UNUSED);
+
+		for (; i < S6_I2S_NUM_LINES; i++)
+			s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_IN);
+	} else {
+		unsigned int cfg[2] = {S6_I2S_UNUSED, S6_I2S_UNUSED};
+
+		if (dev->lines_in > 1 || dev->lines_out > 1)
+			return -EINVAL;
+
+		dai->capture.channels_min = 2 * dev->lines_in;
+		dai->capture.channels_max = 8 * dev->lines_in;
+		dai->playback.channels_min = 2 * dev->lines_out;
+		dai->playback.channels_max = 8 * dev->lines_out;
+
+		if (dev->lines_in)
+			cfg[dev->channel_in] = S6_I2S_IN;
+		if (dev->lines_out)
+			cfg[dev->channel_out] = S6_I2S_OUT;
+
+		s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(0), cfg[0]);
+		s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(1), cfg[1]);
+	}
+
+	if (dev->lines_out) {
+		if (dev->lines_in) {
+			if (!dev->dma_params.dma_out)
+				return -ENODEV;
+		} else {
+			dev->dma_params.dma_out = dev->dma_params.dma_in;
+			dev->dma_params.dma_in = 0;
+		}
+	}
+	dev->dma_params.sif_in = dev->sifbase + (dev->channel_in ?
+					S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
+	dev->dma_params.sif_out = dev->sifbase + (dev->channel_out ?
+					S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
+	dev->dma_params.same_rate = pdata->same_rate | pdata->wide;
+	return 0;
+}
+
+#define S6000_I2S_RATES	(SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_5512 | \
+			 SNDRV_PCM_RATE_8000_192000)
+#define S6000_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops s6000_i2s_dai_ops = {
+	.set_fmt = s6000_i2s_set_dai_fmt,
+	.set_clkdiv = s6000_i2s_set_clkdiv,
+	.hw_params = s6000_i2s_hw_params,
+};
+
+struct snd_soc_dai s6000_i2s_dai = {
+	.name = "s6000-i2s",
+	.id = 0,
+	.probe = s6000_i2s_dai_probe,
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 8,
+		.formats = S6000_I2S_FORMATS,
+		.rates = S6000_I2S_RATES,
+		.rate_min = 0,
+		.rate_max = 1562500,
+	},
+	.capture = {
+		.channels_min = 2,
+		.channels_max = 8,
+		.formats = S6000_I2S_FORMATS,
+		.rates = S6000_I2S_RATES,
+		.rate_min = 0,
+		.rate_max = 1562500,
+	},
+	.ops = &s6000_i2s_dai_ops,
+}
+EXPORT_SYMBOL_GPL(s6000_i2s_dai);
+
+static int __devinit s6000_i2s_probe(struct platform_device *pdev)
+{
+	struct s6000_i2s_dev *dev;
+	struct resource *scbmem, *sifmem, *region, *dma1, *dma2;
+	u8 __iomem *mmio;
+	int ret;
+
+	scbmem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!scbmem) {
+		dev_err(&pdev->dev, "no mem resource?\n");
+		ret = -ENODEV;
+		goto err_release_none;
+	}
+
+	region = request_mem_region(scbmem->start,
+				    scbmem->end - scbmem->start + 1,
+				    pdev->name);
+	if (!region) {
+		dev_err(&pdev->dev, "I2S SCB region already claimed\n");
+		ret = -EBUSY;
+		goto err_release_none;
+	}
+
+	mmio = ioremap(scbmem->start, scbmem->end - scbmem->start + 1);
+	if (!mmio) {
+		dev_err(&pdev->dev, "can't ioremap SCB region\n");
+		ret = -ENOMEM;
+		goto err_release_scb;
+	}
+
+	sifmem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!sifmem) {
+		dev_err(&pdev->dev, "no second mem resource?\n");
+		ret = -ENODEV;
+		goto err_release_map;
+	}
+
+	region = request_mem_region(sifmem->start,
+				    sifmem->end - sifmem->start + 1,
+				    pdev->name);
+	if (!region) {
+		dev_err(&pdev->dev, "I2S SIF region already claimed\n");
+		ret = -EBUSY;
+		goto err_release_map;
+	}
+
+	dma1 = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dma1) {
+		dev_err(&pdev->dev, "no dma resource?\n");
+		ret = -ENODEV;
+		goto err_release_sif;
+	}
+
+	region = request_mem_region(dma1->start, dma1->end - dma1->start + 1,
+				    pdev->name);
+	if (!region) {
+		dev_err(&pdev->dev, "I2S DMA region already claimed\n");
+		ret = -EBUSY;
+		goto err_release_sif;
+	}
+
+	dma2 = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (dma2) {
+		region = request_mem_region(dma2->start,
+					    dma2->end - dma2->start + 1,
+					    pdev->name);
+		if (!region) {
+			dev_err(&pdev->dev,
+				"I2S DMA region already claimed\n");
+			ret = -EBUSY;
+			goto err_release_dma1;
+		}
+	}
+
+	dev = kzalloc(sizeof(struct s6000_i2s_dev), GFP_KERNEL);
+	if (!dev) {
+		ret = -ENOMEM;
+		goto err_release_dma2;
+	}
+
+	s6000_i2s_dai.dev = &pdev->dev;
+	s6000_i2s_dai.private_data = dev;
+	s6000_i2s_dai.dma_data = &dev->dma_params;
+
+	dev->sifbase = sifmem->start;
+	dev->scbbase = mmio;
+
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR,
+			 S6_I2S_INT_ALIGNMENT |
+			 S6_I2S_INT_UNDERRUN |
+			 S6_I2S_INT_OVERRUN);
+
+	s6000_i2s_stop_channel(dev, 0);
+	s6000_i2s_stop_channel(dev, 1);
+	s6000_i2s_wait_disabled(dev);
+
+	dev->dma_params.check_xrun = s6000_i2s_check_xrun;
+	dev->dma_params.trigger = s6000_i2s_trigger;
+	dev->dma_params.dma_in = dma1->start;
+	dev->dma_params.dma_out = dma2 ? dma2->start : 0;
+	dev->dma_params.irq = platform_get_irq(pdev, 0);
+	if (dev->dma_params.irq < 0) {
+		dev_err(&pdev->dev, "no irq resource?\n");
+		ret = -ENODEV;
+		goto err_release_dev;
+	}
+
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE,
+			 S6_I2S_INT_ALIGNMENT |
+			 S6_I2S_INT_UNDERRUN |
+			 S6_I2S_INT_OVERRUN);
+
+	ret = snd_soc_register_dai(&s6000_i2s_dai);
+	if (ret)
+		goto err_release_dev;
+
+	return 0;
+
+err_release_dev:
+	kfree(dev);
+err_release_dma2:
+	if (dma2)
+		release_mem_region(dma2->start, dma2->end - dma2->start + 1);
+err_release_dma1:
+	release_mem_region(dma1->start, dma1->end - dma1->start + 1);
+err_release_sif:
+	release_mem_region(sifmem->start, (sifmem->end - sifmem->start) + 1);
+err_release_map:
+	iounmap(mmio);
+err_release_scb:
+	release_mem_region(scbmem->start, (scbmem->end - scbmem->start) + 1);
+err_release_none:
+	return ret;
+}
+
+static void __devexit s6000_i2s_remove(struct platform_device *pdev)
+{
+	struct s6000_i2s_dev *dev = s6000_i2s_dai.private_data;
+	struct resource *region;
+	void __iomem *mmio = dev->scbbase;
+
+	snd_soc_unregister_dai(&s6000_i2s_dai);
+
+	s6000_i2s_stop_channel(dev, 0);
+	s6000_i2s_stop_channel(dev, 1);
+
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
+	s6000_i2s_dai.private_data = 0;
+	kfree(dev);
+
+	region = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	release_mem_region(region->start, region->end - region->start + 1);
+
+	region = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (region)
+		release_mem_region(region->start,
+				   region->end - region->start + 1);
+
+	region = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(region->start, (region->end - region->start) + 1);
+
+	iounmap(mmio);
+	region = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	release_mem_region(region->start, (region->end - region->start) + 1);
+}
+
+static struct platform_driver s6000_i2s_driver = {
+	.probe  = s6000_i2s_probe,
+	.remove = __devexit_p(s6000_i2s_remove),
+	.driver = {
+		.name   = "s6000-i2s",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init s6000_i2s_init(void)
+{
+	return platform_driver_register(&s6000_i2s_driver);
+}
+module_init(s6000_i2s_init);
+
+static void __exit s6000_i2s_exit(void)
+{
+	platform_driver_unregister(&s6000_i2s_driver);
+}
+module_exit(s6000_i2s_exit);
+
+MODULE_AUTHOR("Daniel Gloeckner");
+MODULE_DESCRIPTION("Stretch s6000 family I2S SoC Interface");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s6000/s6000-i2s.h b/sound/soc/s6000/s6000-i2s.h
new file mode 100644
index 0000000..2375fdf
--- /dev/null
+++ b/sound/soc/s6000/s6000-i2s.h
@@ -0,0 +1,25 @@
+/*
+ * ALSA SoC I2S Audio Layer for the Stretch s6000 family
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _S6000_I2S_H
+#define _S6000_I2S_H
+
+extern struct snd_soc_dai s6000_i2s_dai;
+
+struct s6000_snd_platform_data {
+	int lines_in;
+	int lines_out;
+	int channel_in;
+	int channel_out;
+	int wide;
+	int same_rate;
+};
+#endif
diff --git a/sound/soc/s6000/s6000-pcm.c b/sound/soc/s6000/s6000-pcm.c
new file mode 100644
index 0000000..83b8028
--- /dev/null
+++ b/sound/soc/s6000/s6000-pcm.c
@@ -0,0 +1,497 @@
+/*
+ * ALSA PCM interface for the Stetch s6000 family
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/dma.h>
+#include <variant/dmac.h>
+
+#include "s6000-pcm.h"
+
+#define S6_PCM_PREALLOCATE_SIZE (96 * 1024)
+#define S6_PCM_PREALLOCATE_MAX  (2048 * 1024)
+
+static struct snd_pcm_hardware s6000_pcm_hardware = {
+	.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		 SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
+		 SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_JOINT_DUPLEX),
+	.formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE),
+	.rates = (SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_5512 | \
+		  SNDRV_PCM_RATE_8000_192000),
+	.rate_min = 0,
+	.rate_max = 1562500,
+	.channels_min = 2,
+	.channels_max = 8,
+	.buffer_bytes_max = 0x7ffffff0,
+	.period_bytes_min = 16,
+	.period_bytes_max = 0xfffff0,
+	.periods_min = 2,
+	.periods_max = 1024, /* no limit */
+	.fifo_size = 0,
+};
+
+struct s6000_runtime_data {
+	spinlock_t lock;
+	int period;		/* current DMA period */
+};
+
+static void s6000_pcm_enqueue_dma(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s6000_runtime_data *prtd = runtime->private_data;
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	int channel;
+	unsigned int period_size;
+	unsigned int dma_offset;
+	dma_addr_t dma_pos;
+	dma_addr_t src, dst;
+
+	period_size = snd_pcm_lib_period_bytes(substream);
+	dma_offset = prtd->period * period_size;
+	dma_pos = runtime->dma_addr + dma_offset;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		src = dma_pos;
+		dst = par->sif_out;
+		channel = par->dma_out;
+	} else {
+		src = par->sif_in;
+		dst = dma_pos;
+		channel = par->dma_in;
+	}
+
+	if (!s6dmac_channel_enabled(DMA_MASK_DMAC(channel),
+				    DMA_INDEX_CHNL(channel)))
+		return;
+
+	if (s6dmac_fifo_full(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel))) {
+		printk(KERN_ERR "s6000-pcm: fifo full\n");
+		return;
+	}
+
+	BUG_ON(period_size & 15);
+	s6dmac_put_fifo(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel),
+			src, dst, period_size);
+
+	prtd->period++;
+	if (unlikely(prtd->period >= runtime->periods))
+		prtd->period = 0;
+}
+
+static irqreturn_t s6000_pcm_irq(int irq, void *data)
+{
+	struct snd_pcm *pcm = data;
+	struct snd_soc_pcm_runtime *runtime = pcm->private_data;
+	struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data;
+	struct s6000_runtime_data *prtd;
+	unsigned int has_xrun;
+	int i, ret = IRQ_NONE;
+	u32 channel[2] = {
+		[SNDRV_PCM_STREAM_PLAYBACK] = params->dma_out,
+		[SNDRV_PCM_STREAM_CAPTURE] = params->dma_in
+	};
+
+	has_xrun = params->check_xrun(runtime->dai->cpu_dai);
+
+	for (i = 0; i < ARRAY_SIZE(channel); ++i) {
+		struct snd_pcm_substream *substream = pcm->streams[i].substream;
+		unsigned int pending;
+
+		if (!channel[i])
+			continue;
+
+		if (unlikely(has_xrun & (1 << i)) &&
+		    substream->runtime &&
+		    snd_pcm_running(substream)) {
+			dev_dbg(pcm->dev, "xrun\n");
+			snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
+			ret = IRQ_HANDLED;
+		}
+
+		pending = s6dmac_int_sources(DMA_MASK_DMAC(channel[i]),
+					     DMA_INDEX_CHNL(channel[i]));
+
+		if (pending & 1) {
+			ret = IRQ_HANDLED;
+			if (likely(substream->runtime &&
+				   snd_pcm_running(substream))) {
+				snd_pcm_period_elapsed(substream);
+				dev_dbg(pcm->dev, "period elapsed %x %x\n",
+				       s6dmac_cur_src(DMA_MASK_DMAC(channel[i]),
+						   DMA_INDEX_CHNL(channel[i])),
+				       s6dmac_cur_dst(DMA_MASK_DMAC(channel[i]),
+						   DMA_INDEX_CHNL(channel[i])));
+				prtd = substream->runtime->private_data;
+				spin_lock(&prtd->lock);
+				s6000_pcm_enqueue_dma(substream);
+				spin_unlock(&prtd->lock);
+			}
+		}
+
+		if (unlikely(pending & ~7)) {
+			if (pending & (1 << 3))
+				printk(KERN_WARNING
+				       "s6000-pcm: DMA %x Underflow\n",
+				       channel[i]);
+			if (pending & (1 << 4))
+				printk(KERN_WARNING
+				       "s6000-pcm: DMA %x Overflow\n",
+				       channel[i]);
+			if (pending & 0x1e0)
+				printk(KERN_WARNING
+				       "s6000-pcm: DMA %x Master Error "
+				       "(mask %x)\n",
+				       channel[i], pending >> 5);
+
+		}
+	}
+
+	return ret;
+}
+
+static int s6000_pcm_start(struct snd_pcm_substream *substream)
+{
+	struct s6000_runtime_data *prtd = substream->runtime->private_data;
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	unsigned long flags;
+	int srcinc;
+	u32 dma;
+
+	spin_lock_irqsave(&prtd->lock, flags);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		srcinc = 1;
+		dma = par->dma_out;
+	} else {
+		srcinc = 0;
+		dma = par->dma_in;
+	}
+	s6dmac_enable_chan(DMA_MASK_DMAC(dma), DMA_INDEX_CHNL(dma),
+			   1 /* priority 1 (0 is max) */,
+			   0 /* peripheral requests w/o xfer length mode */,
+			   srcinc /* source address increment */,
+			   srcinc^1 /* destination address increment */,
+			   0 /* chunksize 0 (skip impossible on this dma) */,
+			   0 /* source skip after chunk (impossible) */,
+			   0 /* destination skip after chunk (impossible) */,
+			   4 /* 16 byte burst size */,
+			   -1 /* don't conserve bandwidth */,
+			   0 /* low watermark irq descriptor theshold */,
+			   0 /* disable hardware timestamps */,
+			   1 /* enable channel */);
+
+	s6000_pcm_enqueue_dma(substream);
+	s6000_pcm_enqueue_dma(substream);
+
+	spin_unlock_irqrestore(&prtd->lock, flags);
+
+	return 0;
+}
+
+static int s6000_pcm_stop(struct snd_pcm_substream *substream)
+{
+	struct s6000_runtime_data *prtd = substream->runtime->private_data;
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	unsigned long flags;
+	u32 channel;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		channel = par->dma_out;
+	else
+		channel = par->dma_in;
+
+	s6dmac_set_terminal_count(DMA_MASK_DMAC(channel),
+				  DMA_INDEX_CHNL(channel), 0);
+
+	spin_lock_irqsave(&prtd->lock, flags);
+
+	s6dmac_disable_chan(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel));
+
+	spin_unlock_irqrestore(&prtd->lock, flags);
+
+	return 0;
+}
+
+static int s6000_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	int ret;
+
+	ret = par->trigger(substream, cmd, 0);
+	if (ret < 0)
+		return ret;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		ret = s6000_pcm_start(substream);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		ret = s6000_pcm_stop(substream);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	if (ret < 0)
+		return ret;
+
+	return par->trigger(substream, cmd, 1);
+}
+
+static int s6000_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct s6000_runtime_data *prtd = substream->runtime->private_data;
+
+	prtd->period = 0;
+
+	return 0;
+}
+
+static snd_pcm_uframes_t s6000_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s6000_runtime_data *prtd = runtime->private_data;
+	unsigned long flags;
+	unsigned int offset;
+	dma_addr_t count;
+
+	spin_lock_irqsave(&prtd->lock, flags);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		count = s6dmac_cur_src(DMA_MASK_DMAC(par->dma_out),
+				       DMA_INDEX_CHNL(par->dma_out));
+	else
+		count = s6dmac_cur_dst(DMA_MASK_DMAC(par->dma_in),
+				       DMA_INDEX_CHNL(par->dma_in));
+
+	count -= runtime->dma_addr;
+
+	spin_unlock_irqrestore(&prtd->lock, flags);
+
+	offset = bytes_to_frames(runtime, count);
+	if (unlikely(offset >= runtime->buffer_size))
+		offset = 0;
+
+	return offset;
+}
+
+static int s6000_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s6000_runtime_data *prtd;
+	int ret;
+
+	snd_soc_set_runtime_hwparams(substream, &s6000_pcm_hardware);
+
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 16);
+	if (ret < 0)
+		return ret;
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 16);
+	if (ret < 0)
+		return ret;
+	ret = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (ret < 0)
+		return ret;
+
+	if (par->same_rate) {
+		int rate;
+		spin_lock(&par->lock); /* needed? */
+		rate = par->rate;
+		spin_unlock(&par->lock);
+		if (rate != -1) {
+			ret = snd_pcm_hw_constraint_minmax(runtime,
+							SNDRV_PCM_HW_PARAM_RATE,
+							rate, rate);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	prtd = kzalloc(sizeof(struct s6000_runtime_data), GFP_KERNEL);
+	if (prtd == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&prtd->lock);
+
+	runtime->private_data = prtd;
+
+	return 0;
+}
+
+static int s6000_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s6000_runtime_data *prtd = runtime->private_data;
+
+	kfree(prtd);
+
+	return 0;
+}
+
+static int s6000_pcm_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *hw_params)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	int ret;
+	ret = snd_pcm_lib_malloc_pages(substream,
+				       params_buffer_bytes(hw_params));
+	if (ret < 0) {
+		printk(KERN_WARNING "s6000-pcm: allocation of memory failed\n");
+		return ret;
+	}
+
+	if (par->same_rate) {
+		spin_lock(&par->lock);
+		if (par->rate == -1 ||
+		    !(par->in_use & ~(1 << substream->stream))) {
+			par->rate = params_rate(hw_params);
+			par->in_use |= 1 << substream->stream;
+		} else if (params_rate(hw_params) != par->rate) {
+			snd_pcm_lib_free_pages(substream);
+			par->in_use &= ~(1 << substream->stream);
+			ret = -EBUSY;
+		}
+		spin_unlock(&par->lock);
+	}
+	return ret;
+}
+
+static int s6000_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+
+	spin_lock(&par->lock);
+	par->in_use &= ~(1 << substream->stream);
+	if (!par->in_use)
+		par->rate = -1;
+	spin_unlock(&par->lock);
+
+	return snd_pcm_lib_free_pages(substream);
+}
+
+static struct snd_pcm_ops s6000_pcm_ops = {
+	.open = 	s6000_pcm_open,
+	.close = 	s6000_pcm_close,
+	.ioctl = 	snd_pcm_lib_ioctl,
+	.hw_params = 	s6000_pcm_hw_params,
+	.hw_free = 	s6000_pcm_hw_free,
+	.trigger =	s6000_pcm_trigger,
+	.prepare = 	s6000_pcm_prepare,
+	.pointer = 	s6000_pcm_pointer,
+};
+
+static void s6000_pcm_free(struct snd_pcm *pcm)
+{
+	struct snd_soc_pcm_runtime *runtime = pcm->private_data;
+	struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data;
+
+	free_irq(params->irq, pcm);
+	snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static u64 s6000_pcm_dmamask = DMA_32BIT_MASK;
+
+static int s6000_pcm_new(struct snd_card *card,
+			 struct snd_soc_dai *dai, struct snd_pcm *pcm)
+{
+	struct snd_soc_pcm_runtime *runtime = pcm->private_data;
+	struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data;
+	int res;
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &s6000_pcm_dmamask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = DMA_32BIT_MASK;
+
+	if (params->dma_in) {
+		s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_in),
+				    DMA_INDEX_CHNL(params->dma_in));
+		s6dmac_int_sources(DMA_MASK_DMAC(params->dma_in),
+				   DMA_INDEX_CHNL(params->dma_in));
+	}
+
+	if (params->dma_out) {
+		s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_out),
+				    DMA_INDEX_CHNL(params->dma_out));
+		s6dmac_int_sources(DMA_MASK_DMAC(params->dma_out),
+				   DMA_INDEX_CHNL(params->dma_out));
+	}
+
+	res = request_irq(params->irq, s6000_pcm_irq, IRQF_SHARED,
+			  s6000_soc_platform.name, pcm);
+	if (res) {
+		printk(KERN_ERR "s6000-pcm couldn't get IRQ\n");
+		return res;
+	}
+
+	res = snd_pcm_lib_preallocate_pages_for_all(pcm,
+						    SNDRV_DMA_TYPE_DEV,
+						    card->dev,
+						    S6_PCM_PREALLOCATE_SIZE,
+						    S6_PCM_PREALLOCATE_MAX);
+	if (res)
+		printk(KERN_WARNING "s6000-pcm: preallocation failed\n");
+
+	spin_lock_init(&params->lock);
+	params->in_use = 0;
+	params->rate = -1;
+	return 0;
+}
+
+struct snd_soc_platform s6000_soc_platform = {
+	.name = 	"s6000-audio",
+	.pcm_ops = 	&s6000_pcm_ops,
+	.pcm_new = 	s6000_pcm_new,
+	.pcm_free = 	s6000_pcm_free,
+};
+EXPORT_SYMBOL_GPL(s6000_soc_platform);
+
+static int __init s6000_pcm_init(void)
+{
+	return snd_soc_register_platform(&s6000_soc_platform);
+}
+module_init(s6000_pcm_init);
+
+static void __exit s6000_pcm_exit(void)
+{
+	snd_soc_unregister_platform(&s6000_soc_platform);
+}
+module_exit(s6000_pcm_exit);
+
+MODULE_AUTHOR("Daniel Gloeckner");
+MODULE_DESCRIPTION("Stretch s6000 family PCM DMA module");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s6000/s6000-pcm.h b/sound/soc/s6000/s6000-pcm.h
new file mode 100644
index 0000000..96f23f6
--- /dev/null
+++ b/sound/soc/s6000/s6000-pcm.h
@@ -0,0 +1,35 @@
+/*
+ * ALSA PCM interface for the Stretch s6000 family
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _S6000_PCM_H
+#define _S6000_PCM_H
+
+struct snd_soc_dai;
+struct snd_pcm_substream;
+
+struct s6000_pcm_dma_params {
+	unsigned int (*check_xrun)(struct snd_soc_dai *cpu_dai);
+	int (*trigger)(struct snd_pcm_substream *substream, int cmd, int after);
+	dma_addr_t sif_in;
+	dma_addr_t sif_out;
+	u32 dma_in;
+	u32 dma_out;
+	int irq;
+	int same_rate;
+
+	spinlock_t lock;
+	int in_use;
+	int rate;
+};
+
+extern struct snd_soc_platform s6000_soc_platform;
+
+#endif
diff --git a/sound/soc/s6000/s6105-ipcam.c b/sound/soc/s6000/s6105-ipcam.c
new file mode 100644
index 0000000..b5f95f9
--- /dev/null
+++ b/sound/soc/s6000/s6105-ipcam.c
@@ -0,0 +1,244 @@
+/*
+ * ASoC driver for Stretch s6105 IP camera platform
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <variant/dmac.h>
+
+#include "../codecs/tlv320aic3x.h"
+#include "s6000-pcm.h"
+#include "s6000-i2s.h"
+
+#define S6105_CAM_CODEC_CLOCK 12288000
+
+static int s6105_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret = 0;
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+					     SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_CBM_CFM |
+					   SND_SOC_DAIFMT_NB_NF);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, S6105_CAM_CODEC_CLOCK,
+					    SND_SOC_CLOCK_OUT);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops s6105_ops = {
+	.hw_params = s6105_hw_params,
+};
+
+/* s6105 machine dapm widgets */
+static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
+	SND_SOC_DAPM_LINE("Audio Out Differential", NULL),
+	SND_SOC_DAPM_LINE("Audio Out Stereo", NULL),
+	SND_SOC_DAPM_LINE("Audio In", NULL),
+};
+
+/* s6105 machine audio_mapnections to the codec pins */
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* Audio Out connected to HPLOUT, HPLCOM, HPROUT */
+	{"Audio Out Differential", NULL, "HPLOUT"},
+	{"Audio Out Differential", NULL, "HPLCOM"},
+	{"Audio Out Stereo", NULL, "HPLOUT"},
+	{"Audio Out Stereo", NULL, "HPROUT"},
+
+	/* Audio In connected to LINE1L, LINE1R */
+	{"LINE1L", NULL, "Audio In"},
+	{"LINE1R", NULL, "Audio In"},
+};
+
+static int output_type_info(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = 2;
+	if (uinfo->value.enumerated.item) {
+		uinfo->value.enumerated.item = 1;
+		strcpy(uinfo->value.enumerated.name, "HPLOUT/HPROUT");
+	} else {
+		strcpy(uinfo->value.enumerated.name, "HPLOUT/HPLCOM");
+	}
+	return 0;
+}
+
+static int output_type_get(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.enumerated.item[0] = kcontrol->private_value;
+	return 0;
+}
+
+static int output_type_put(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = kcontrol->private_data;
+	unsigned int val = (ucontrol->value.enumerated.item[0] != 0);
+	char *differential = "Audio Out Differential";
+	char *stereo = "Audio Out Stereo";
+
+	if (kcontrol->private_value == val)
+		return 0;
+	kcontrol->private_value = val;
+	snd_soc_dapm_disable_pin(codec, val ? differential : stereo);
+	snd_soc_dapm_sync(codec);
+	snd_soc_dapm_enable_pin(codec, val ? stereo : differential);
+	snd_soc_dapm_sync(codec);
+
+	return 1;
+}
+
+static const struct snd_kcontrol_new audio_out_mux = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Master Output Mux",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = output_type_info,
+	.get = output_type_get,
+	.put = output_type_put,
+	.private_value = 1 /* default to stereo */
+};
+
+/* Logic for a aic3x as connected on the s6105 ip camera ref design */
+static int s6105_aic3x_init(struct snd_soc_codec *codec)
+{
+	/* Add s6105 specific widgets */
+	snd_soc_dapm_new_controls(codec, aic3x_dapm_widgets,
+				  ARRAY_SIZE(aic3x_dapm_widgets));
+
+	/* Set up s6105 specific audio path audio_map */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	/* not present */
+	snd_soc_dapm_nc_pin(codec, "MONO_LOUT");
+	snd_soc_dapm_nc_pin(codec, "LINE2L");
+	snd_soc_dapm_nc_pin(codec, "LINE2R");
+
+	/* not connected */
+	snd_soc_dapm_nc_pin(codec, "MIC3L"); /* LINE2L on this chip */
+	snd_soc_dapm_nc_pin(codec, "MIC3R"); /* LINE2R on this chip */
+	snd_soc_dapm_nc_pin(codec, "LLOUT");
+	snd_soc_dapm_nc_pin(codec, "RLOUT");
+	snd_soc_dapm_nc_pin(codec, "HPRCOM");
+
+	/* always connected */
+	snd_soc_dapm_enable_pin(codec, "Audio In");
+
+	/* must correspond to audio_out_mux.private_value initializer */
+	snd_soc_dapm_disable_pin(codec, "Audio Out Differential");
+	snd_soc_dapm_sync(codec);
+	snd_soc_dapm_enable_pin(codec, "Audio Out Stereo");
+
+	snd_soc_dapm_sync(codec);
+
+	snd_ctl_add(codec->card, snd_ctl_new1(&audio_out_mux, codec));
+
+	return 0;
+}
+
+/* s6105 digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link s6105_dai = {
+	.name = "TLV320AIC31",
+	.stream_name = "AIC31",
+	.cpu_dai = &s6000_i2s_dai,
+	.codec_dai = &aic3x_dai,
+	.init = s6105_aic3x_init,
+	.ops = &s6105_ops,
+};
+
+/* s6105 audio machine driver */
+static struct snd_soc_card snd_soc_card_s6105 = {
+	.name = "Stretch IP Camera",
+	.platform = &s6000_soc_platform,
+	.dai_link = &s6105_dai,
+	.num_links = 1,
+};
+
+/* s6105 audio private data */
+static struct aic3x_setup_data s6105_aic3x_setup = {
+	.i2c_bus = 0,
+	.i2c_address = 0x18,
+};
+
+/* s6105 audio subsystem */
+static struct snd_soc_device s6105_snd_devdata = {
+	.card = &snd_soc_card_s6105,
+	.codec_dev = &soc_codec_dev_aic3x,
+	.codec_data = &s6105_aic3x_setup,
+};
+
+static struct s6000_snd_platform_data __initdata s6105_snd_data = {
+	.wide		= 0,
+	.channel_in	= 0,
+	.channel_out	= 1,
+	.lines_in	= 1,
+	.lines_out	= 1,
+	.same_rate	= 1,
+};
+
+static struct platform_device *s6105_snd_device;
+
+static int __init s6105_init(void)
+{
+	int ret;
+
+	s6105_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!s6105_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(s6105_snd_device, &s6105_snd_devdata);
+	s6105_snd_devdata.dev = &s6105_snd_device->dev;
+	platform_device_add_data(s6105_snd_device, &s6105_snd_data,
+				 sizeof(s6105_snd_data));
+
+	ret = platform_device_add(s6105_snd_device);
+	if (ret)
+		platform_device_put(s6105_snd_device);
+
+	return ret;
+}
+
+static void __exit s6105_exit(void)
+{
+	platform_device_unregister(s6105_snd_device);
+}
+
+module_init(s6105_init);
+module_exit(s6105_exit);
+
+MODULE_AUTHOR("Daniel Gloeckner");
+MODULE_DESCRIPTION("Stretch s6105 IP camera ASoC driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c
index 56fa087..b378096 100644
--- a/sound/soc/sh/ssi.c
+++ b/sound/soc/sh/ssi.c
@@ -145,7 +145,7 @@
 	recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
 
 	pr_debug("ssi_hw_params() enter\nssicr was    %08lx\n", ssicr);
-	pr_debug("bits: %d channels: %d\n", bits, channels);
+	pr_debug("bits: %u channels: %u\n", bits, channels);
 
 	ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
 		   CR_SWL_MASK);
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 1cd149b..3f44150 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -113,6 +113,35 @@
 }
 #endif
 
+static int soc_pcm_apply_symmetry(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_card *card = socdev->card;
+	struct snd_soc_dai_link *machine = rtd->dai;
+	struct snd_soc_dai *cpu_dai = machine->cpu_dai;
+	struct snd_soc_dai *codec_dai = machine->codec_dai;
+	int ret;
+
+	if (codec_dai->symmetric_rates || cpu_dai->symmetric_rates ||
+	    machine->symmetric_rates) {
+		dev_dbg(card->dev, "Symmetry forces %dHz rate\n", 
+			machine->rate);
+
+		ret = snd_pcm_hw_constraint_minmax(substream->runtime,
+						   SNDRV_PCM_HW_PARAM_RATE,
+						   machine->rate,
+						   machine->rate);
+		if (ret < 0) {
+			dev_err(card->dev,
+				"Unable to apply rate symmetry constraint: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 /*
  * Called by ALSA when a PCM substream is opened, the runtime->hw record is
  * then initialized and any private data can be allocated. This also calls
@@ -221,6 +250,13 @@
 		goto machine_err;
 	}
 
+	/* Symmetry only applies if we've already got an active stream. */
+	if (cpu_dai->active || codec_dai->active) {
+		ret = soc_pcm_apply_symmetry(substream);
+		if (ret != 0)
+			goto machine_err;
+	}
+
 	pr_debug("asoc: %s <-> %s info:\n", codec_dai->name, cpu_dai->name);
 	pr_debug("asoc: rate mask 0x%x\n", runtime->hw.rates);
 	pr_debug("asoc: min ch %d max ch %d\n", runtime->hw.channels_min,
@@ -263,7 +299,6 @@
 {
 	struct snd_soc_card *card = container_of(work, struct snd_soc_card,
 						 delayed_work.work);
-	struct snd_soc_device *socdev = card->socdev;
 	struct snd_soc_codec *codec = card->codec;
 	struct snd_soc_dai *codec_dai;
 	int i;
@@ -279,27 +314,10 @@
 
 		/* are we waiting on this codec DAI stream */
 		if (codec_dai->pop_wait == 1) {
-
-			/* Reduce power if no longer active */
-			if (codec->active == 0) {
-				pr_debug("pop wq D1 %s %s\n", codec->name,
-					 codec_dai->playback.stream_name);
-				snd_soc_dapm_set_bias_level(socdev,
-					SND_SOC_BIAS_PREPARE);
-			}
-
 			codec_dai->pop_wait = 0;
 			snd_soc_dapm_stream_event(codec,
 				codec_dai->playback.stream_name,
 				SND_SOC_DAPM_STREAM_STOP);
-
-			/* Fall into standby if no longer active */
-			if (codec->active == 0) {
-				pr_debug("pop wq D3 %s %s\n", codec->name,
-					 codec_dai->playback.stream_name);
-				snd_soc_dapm_set_bias_level(socdev,
-					SND_SOC_BIAS_STANDBY);
-			}
 		}
 	}
 	mutex_unlock(&pcm_mutex);
@@ -363,10 +381,6 @@
 		snd_soc_dapm_stream_event(codec,
 			codec_dai->capture.stream_name,
 			SND_SOC_DAPM_STREAM_STOP);
-
-		if (codec->active == 0 && codec_dai->pop_wait == 0)
-			snd_soc_dapm_set_bias_level(socdev,
-						SND_SOC_BIAS_STANDBY);
 	}
 
 	mutex_unlock(&pcm_mutex);
@@ -431,36 +445,16 @@
 		cancel_delayed_work(&card->delayed_work);
 	}
 
-	/* do we need to power up codec */
-	if (codec->bias_level != SND_SOC_BIAS_ON) {
-		snd_soc_dapm_set_bias_level(socdev,
-					    SND_SOC_BIAS_PREPARE);
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		snd_soc_dapm_stream_event(codec,
+					  codec_dai->playback.stream_name,
+					  SND_SOC_DAPM_STREAM_START);
+	else
+		snd_soc_dapm_stream_event(codec,
+					  codec_dai->capture.stream_name,
+					  SND_SOC_DAPM_STREAM_START);
 
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			snd_soc_dapm_stream_event(codec,
-					codec_dai->playback.stream_name,
-					SND_SOC_DAPM_STREAM_START);
-		else
-			snd_soc_dapm_stream_event(codec,
-					codec_dai->capture.stream_name,
-					SND_SOC_DAPM_STREAM_START);
-
-		snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_ON);
-		snd_soc_dai_digital_mute(codec_dai, 0);
-
-	} else {
-		/* codec already powered - power on widgets */
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			snd_soc_dapm_stream_event(codec,
-					codec_dai->playback.stream_name,
-					SND_SOC_DAPM_STREAM_START);
-		else
-			snd_soc_dapm_stream_event(codec,
-					codec_dai->capture.stream_name,
-					SND_SOC_DAPM_STREAM_START);
-
-		snd_soc_dai_digital_mute(codec_dai, 0);
-	}
+	snd_soc_dai_digital_mute(codec_dai, 0);
 
 out:
 	mutex_unlock(&pcm_mutex);
@@ -521,6 +515,8 @@
 		}
 	}
 
+	machine->rate = params_rate(params);
+
 out:
 	mutex_unlock(&pcm_mutex);
 	return ret;
@@ -632,6 +628,12 @@
 	struct snd_soc_codec *codec = card->codec;
 	int i;
 
+	/* If the initialization of this soc device failed, there is no codec
+	 * associated with it. Just bail out in this case.
+	 */
+	if (!codec)
+		return 0;
+
 	/* Due to the resume being scheduled into a workqueue we could
 	* suspend before that's finished - wait for it to complete.
 	 */
@@ -1334,6 +1336,7 @@
 		return ret;
 	}
 
+	codec->socdev = socdev;
 	codec->card->dev = socdev->dev;
 	codec->card->private_data = codec;
 	strncpy(codec->card->driver, codec->name, sizeof(codec->card->driver));
@@ -1744,7 +1747,7 @@
 {
 	int max = kcontrol->private_value;
 
-	if (max == 1)
+	if (max == 1 && !strstr(kcontrol->id.name, " Volume"))
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
 	else
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
@@ -1774,7 +1777,7 @@
 	unsigned int shift = mc->shift;
 	unsigned int rshift = mc->rshift;
 
-	if (max == 1)
+	if (max == 1 && !strstr(kcontrol->id.name, " Volume"))
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
 	else
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
@@ -1881,7 +1884,7 @@
 		(struct soc_mixer_control *)kcontrol->private_value;
 	int max = mc->max;
 
-	if (max == 1)
+	if (max == 1 && !strstr(kcontrol->id.name, " Volume"))
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
 	else
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
@@ -2065,7 +2068,7 @@
 int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
 	unsigned int freq, int dir)
 {
-	if (dai->ops->set_sysclk)
+	if (dai->ops && dai->ops->set_sysclk)
 		return dai->ops->set_sysclk(dai, clk_id, freq, dir);
 	else
 		return -EINVAL;
@@ -2085,7 +2088,7 @@
 int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai,
 	int div_id, int div)
 {
-	if (dai->ops->set_clkdiv)
+	if (dai->ops && dai->ops->set_clkdiv)
 		return dai->ops->set_clkdiv(dai, div_id, div);
 	else
 		return -EINVAL;
@@ -2104,7 +2107,7 @@
 int snd_soc_dai_set_pll(struct snd_soc_dai *dai,
 	int pll_id, unsigned int freq_in, unsigned int freq_out)
 {
-	if (dai->ops->set_pll)
+	if (dai->ops && dai->ops->set_pll)
 		return dai->ops->set_pll(dai, pll_id, freq_in, freq_out);
 	else
 		return -EINVAL;
@@ -2120,7 +2123,7 @@
  */
 int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
-	if (dai->ops->set_fmt)
+	if (dai->ops && dai->ops->set_fmt)
 		return dai->ops->set_fmt(dai, fmt);
 	else
 		return -EINVAL;
@@ -2139,7 +2142,7 @@
 int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
 	unsigned int mask, int slots)
 {
-	if (dai->ops->set_sysclk)
+	if (dai->ops && dai->ops->set_tdm_slot)
 		return dai->ops->set_tdm_slot(dai, mask, slots);
 	else
 		return -EINVAL;
@@ -2155,7 +2158,7 @@
  */
 int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate)
 {
-	if (dai->ops->set_sysclk)
+	if (dai->ops && dai->ops->set_tristate)
 		return dai->ops->set_tristate(dai, tristate);
 	else
 		return -EINVAL;
@@ -2171,7 +2174,7 @@
  */
 int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute)
 {
-	if (dai->ops->digital_mute)
+	if (dai->ops && dai->ops->digital_mute)
 		return dai->ops->digital_mute(dai, mute);
 	else
 		return -EINVAL;
@@ -2352,6 +2355,39 @@
 }
 EXPORT_SYMBOL_GPL(snd_soc_unregister_platform);
 
+static u64 codec_format_map[] = {
+	SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE,
+	SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE,
+	SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE,
+	SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE,
+	SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE,
+	SNDRV_PCM_FMTBIT_U32_LE | SNDRV_PCM_FMTBIT_U32_BE,
+	SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3BE,
+	SNDRV_PCM_FMTBIT_U24_3LE | SNDRV_PCM_FMTBIT_U24_3BE,
+	SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE,
+	SNDRV_PCM_FMTBIT_U20_3LE | SNDRV_PCM_FMTBIT_U20_3BE,
+	SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S18_3BE,
+	SNDRV_PCM_FMTBIT_U18_3LE | SNDRV_PCM_FMTBIT_U18_3BE,
+	SNDRV_PCM_FMTBIT_FLOAT_LE | SNDRV_PCM_FMTBIT_FLOAT_BE,
+	SNDRV_PCM_FMTBIT_FLOAT64_LE | SNDRV_PCM_FMTBIT_FLOAT64_BE,
+	SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE
+	| SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE,
+};
+
+/* Fix up the DAI formats for endianness: codecs don't actually see
+ * the endianness of the data but we're using the CPU format
+ * definitions which do need to include endianness so we ensure that
+ * codec DAIs always have both big and little endian variants set.
+ */
+static void fixup_codec_formats(struct snd_soc_pcm_stream *stream)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(codec_format_map); i++)
+		if (stream->formats & codec_format_map[i])
+			stream->formats |= codec_format_map[i];
+}
+
 /**
  * snd_soc_register_codec - Register a codec with the ASoC core
  *
@@ -2359,6 +2395,8 @@
  */
 int snd_soc_register_codec(struct snd_soc_codec *codec)
 {
+	int i;
+
 	if (!codec->name)
 		return -EINVAL;
 
@@ -2368,6 +2406,11 @@
 
 	INIT_LIST_HEAD(&codec->list);
 
+	for (i = 0; i < codec->num_dai; i++) {
+		fixup_codec_formats(&codec->dai[i].playback);
+		fixup_codec_formats(&codec->dai[i].capture);
+	}
+
 	mutex_lock(&client_mutex);
 	list_add(&codec->list, &codec_list);
 	snd_soc_instantiate_cards();
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 735903a..21c6907 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -12,7 +12,7 @@
  *  Features:
  *    o Changes power status of internal codec blocks depending on the
  *      dynamic configuration of codec internal audio paths and active
- *      DAC's/ADC's.
+ *      DACs/ADCs.
  *    o Platform power domain - can support external components i.e. amps and
  *      mic/meadphone insertion events.
  *    o Automatic Mic Bias support
@@ -52,23 +52,21 @@
 
 /* dapm power sequences - make this per codec in the future */
 static int dapm_up_seq[] = {
-	snd_soc_dapm_pre, snd_soc_dapm_micbias, snd_soc_dapm_mic,
-	snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_dac,
-	snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_pga,
-	snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk, snd_soc_dapm_post
+	snd_soc_dapm_pre, snd_soc_dapm_supply, snd_soc_dapm_micbias,
+	snd_soc_dapm_mic, snd_soc_dapm_mux, snd_soc_dapm_value_mux,
+	snd_soc_dapm_dac, snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl,
+	snd_soc_dapm_pga, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
+	snd_soc_dapm_post
 };
 
 static int dapm_down_seq[] = {
 	snd_soc_dapm_pre, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
 	snd_soc_dapm_pga, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_mixer,
 	snd_soc_dapm_dac, snd_soc_dapm_mic, snd_soc_dapm_micbias,
-	snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_post
+	snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_supply,
+	snd_soc_dapm_post
 };
 
-static int dapm_status = 1;
-module_param(dapm_status, int, 0);
-MODULE_PARM_DESC(dapm_status, "enable DPM sysfs entries");
-
 static void pop_wait(u32 pop_time)
 {
 	if (pop_time)
@@ -96,6 +94,48 @@
 	return kmemdup(_widget, sizeof(*_widget), GFP_KERNEL);
 }
 
+/**
+ * snd_soc_dapm_set_bias_level - set the bias level for the system
+ * @socdev: audio device
+ * @level: level to configure
+ *
+ * Configure the bias (power) levels for the SoC audio device.
+ *
+ * Returns 0 for success else error.
+ */
+static int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
+				       enum snd_soc_bias_level level)
+{
+	struct snd_soc_card *card = socdev->card;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int ret = 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		dev_dbg(socdev->dev, "Setting full bias\n");
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		dev_dbg(socdev->dev, "Setting bias prepare\n");
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		dev_dbg(socdev->dev, "Setting standby bias\n");
+		break;
+	case SND_SOC_BIAS_OFF:
+		dev_dbg(socdev->dev, "Setting bias off\n");
+		break;
+	default:
+		dev_err(socdev->dev, "Setting invalid bias %d\n", level);
+		return -EINVAL;
+	}
+
+	if (card->set_bias_level)
+		ret = card->set_bias_level(card, level);
+	if (ret == 0 && codec->set_bias_level)
+		ret = codec->set_bias_level(codec, level);
+
+	return ret;
+}
+
 /* set up initial codec paths */
 static void dapm_set_path_status(struct snd_soc_dapm_widget *w,
 	struct snd_soc_dapm_path *p, int i)
@@ -165,6 +205,7 @@
 	case snd_soc_dapm_dac:
 	case snd_soc_dapm_micbias:
 	case snd_soc_dapm_vmid:
+	case snd_soc_dapm_supply:
 		p->connect = 1;
 	break;
 	/* does effect routing - dynamically connected */
@@ -179,7 +220,7 @@
 	}
 }
 
-/* connect mux widget to it's interconnecting audio paths */
+/* connect mux widget to its interconnecting audio paths */
 static int dapm_connect_mux(struct snd_soc_codec *codec,
 	struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest,
 	struct snd_soc_dapm_path *path, const char *control_name,
@@ -202,7 +243,7 @@
 	return -ENODEV;
 }
 
-/* connect mixer widget to it's interconnecting audio paths */
+/* connect mixer widget to its interconnecting audio paths */
 static int dapm_connect_mixer(struct snd_soc_codec *codec,
 	struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest,
 	struct snd_soc_dapm_path *path, const char *control_name)
@@ -357,8 +398,9 @@
 				path->long_name);
 			ret = snd_ctl_add(codec->card, path->kcontrol);
 			if (ret < 0) {
-				printk(KERN_ERR "asoc: failed to add dapm kcontrol %s\n",
-						path->long_name);
+				printk(KERN_ERR "asoc: failed to add dapm kcontrol %s: %d\n",
+				       path->long_name,
+				       ret);
 				kfree(path->long_name);
 				path->long_name = NULL;
 				return ret;
@@ -434,6 +476,9 @@
 	struct snd_soc_dapm_path *path;
 	int con = 0;
 
+	if (widget->id == snd_soc_dapm_supply)
+		return 0;
+
 	if (widget->id == snd_soc_dapm_adc && widget->active)
 		return 1;
 
@@ -470,6 +515,9 @@
 	struct snd_soc_dapm_path *path;
 	int con = 0;
 
+	if (widget->id == snd_soc_dapm_supply)
+		return 0;
+
 	/* active stream ? */
 	if (widget->id == snd_soc_dapm_dac && widget->active)
 		return 1;
@@ -521,6 +569,126 @@
 }
 EXPORT_SYMBOL_GPL(dapm_reg_event);
 
+/* Standard power change method, used to apply power changes to most
+ * widgets.
+ */
+static int dapm_generic_apply_power(struct snd_soc_dapm_widget *w)
+{
+	int ret;
+
+	/* call any power change event handlers */
+	if (w->event)
+		pr_debug("power %s event for %s flags %x\n",
+			 w->power ? "on" : "off",
+			 w->name, w->event_flags);
+
+	/* power up pre event */
+	if (w->power && w->event &&
+	    (w->event_flags & SND_SOC_DAPM_PRE_PMU)) {
+		ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* power down pre event */
+	if (!w->power && w->event &&
+	    (w->event_flags & SND_SOC_DAPM_PRE_PMD)) {
+		ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Lower PGA volume to reduce pops */
+	if (w->id == snd_soc_dapm_pga && !w->power)
+		dapm_set_pga(w, w->power);
+
+	dapm_update_bits(w);
+
+	/* Raise PGA volume to reduce pops */
+	if (w->id == snd_soc_dapm_pga && w->power)
+		dapm_set_pga(w, w->power);
+
+	/* power up post event */
+	if (w->power && w->event &&
+	    (w->event_flags & SND_SOC_DAPM_POST_PMU)) {
+		ret = w->event(w,
+			       NULL, SND_SOC_DAPM_POST_PMU);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* power down post event */
+	if (!w->power && w->event &&
+	    (w->event_flags & SND_SOC_DAPM_POST_PMD)) {
+		ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/* Generic check to see if a widget should be powered.
+ */
+static int dapm_generic_check_power(struct snd_soc_dapm_widget *w)
+{
+	int in, out;
+
+	in = is_connected_input_ep(w);
+	dapm_clear_walk(w->codec);
+	out = is_connected_output_ep(w);
+	dapm_clear_walk(w->codec);
+	return out != 0 && in != 0;
+}
+
+/* Check to see if an ADC has power */
+static int dapm_adc_check_power(struct snd_soc_dapm_widget *w)
+{
+	int in;
+
+	if (w->active) {
+		in = is_connected_input_ep(w);
+		dapm_clear_walk(w->codec);
+		return in != 0;
+	} else {
+		return dapm_generic_check_power(w);
+	}
+}
+
+/* Check to see if a DAC has power */
+static int dapm_dac_check_power(struct snd_soc_dapm_widget *w)
+{
+	int out;
+
+	if (w->active) {
+		out = is_connected_output_ep(w);
+		dapm_clear_walk(w->codec);
+		return out != 0;
+	} else {
+		return dapm_generic_check_power(w);
+	}
+}
+
+/* Check to see if a power supply is needed */
+static int dapm_supply_check_power(struct snd_soc_dapm_widget *w)
+{
+	struct snd_soc_dapm_path *path;
+	int power = 0;
+
+	/* Check if one of our outputs is connected */
+	list_for_each_entry(path, &w->sinks, list_source) {
+		if (path->sink && path->sink->power_check &&
+		    path->sink->power_check(path->sink)) {
+			power = 1;
+			break;
+		}
+	}
+
+	dapm_clear_walk(w->codec);
+
+	return power;
+}
+
 /*
  * Scan a single DAPM widget for a complete audio path and update the
  * power status appropriately.
@@ -528,32 +696,10 @@
 static int dapm_power_widget(struct snd_soc_codec *codec, int event,
 			     struct snd_soc_dapm_widget *w)
 {
-	int in, out, power_change, power, ret;
+	int ret;
 
-	/* vmid - no action */
-	if (w->id == snd_soc_dapm_vmid)
-		return 0;
-
-	/* active ADC */
-	if (w->id == snd_soc_dapm_adc && w->active) {
-		in = is_connected_input_ep(w);
-		dapm_clear_walk(w->codec);
-		w->power = (in != 0) ? 1 : 0;
-		dapm_update_bits(w);
-		return 0;
-	}
-
-	/* active DAC */
-	if (w->id == snd_soc_dapm_dac && w->active) {
-		out = is_connected_output_ep(w);
-		dapm_clear_walk(w->codec);
-		w->power = (out != 0) ? 1 : 0;
-		dapm_update_bits(w);
-		return 0;
-	}
-
-	/* pre and post event widgets */
-	if (w->id == snd_soc_dapm_pre) {
+	switch (w->id) {
+	case snd_soc_dapm_pre:
 		if (!w->event)
 			return 0;
 
@@ -569,8 +715,8 @@
 				return ret;
 		}
 		return 0;
-	}
-	if (w->id == snd_soc_dapm_post) {
+
+	case snd_soc_dapm_post:
 		if (!w->event)
 			return 0;
 
@@ -586,70 +732,10 @@
 				return ret;
 		}
 		return 0;
+
+	default:
+		return dapm_generic_apply_power(w);
 	}
-
-	/* all other widgets */
-	in = is_connected_input_ep(w);
-	dapm_clear_walk(w->codec);
-	out = is_connected_output_ep(w);
-	dapm_clear_walk(w->codec);
-	power = (out != 0 && in != 0) ? 1 : 0;
-	power_change = (w->power == power) ? 0 : 1;
-	w->power = power;
-
-	if (!power_change)
-		return 0;
-
-	/* call any power change event handlers */
-	if (w->event)
-		pr_debug("power %s event for %s flags %x\n",
-			 w->power ? "on" : "off",
-			 w->name, w->event_flags);
-
-	/* power up pre event */
-	if (power && w->event &&
-	    (w->event_flags & SND_SOC_DAPM_PRE_PMU)) {
-		ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
-		if (ret < 0)
-			return ret;
-	}
-
-	/* power down pre event */
-	if (!power && w->event &&
-	    (w->event_flags & SND_SOC_DAPM_PRE_PMD)) {
-		ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
-		if (ret < 0)
-			return ret;
-	}
-
-	/* Lower PGA volume to reduce pops */
-	if (w->id == snd_soc_dapm_pga && !power)
-		dapm_set_pga(w, power);
-
-	dapm_update_bits(w);
-
-	/* Raise PGA volume to reduce pops */
-	if (w->id == snd_soc_dapm_pga && power)
-		dapm_set_pga(w, power);
-
-	/* power up post event */
-	if (power && w->event &&
-	    (w->event_flags & SND_SOC_DAPM_POST_PMU)) {
-		ret = w->event(w,
-			       NULL, SND_SOC_DAPM_POST_PMU);
-		if (ret < 0)
-			return ret;
-	}
-
-	/* power down post event */
-	if (!power && w->event &&
-	    (w->event_flags & SND_SOC_DAPM_POST_PMD)) {
-		ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
 }
 
 /*
@@ -663,31 +749,102 @@
  */
 static int dapm_power_widgets(struct snd_soc_codec *codec, int event)
 {
+	struct snd_soc_device *socdev = codec->socdev;
 	struct snd_soc_dapm_widget *w;
-	int i, c = 1, *seq = NULL, ret = 0;
+	int ret = 0;
+	int i, power;
+	int sys_power = 0;
 
-	/* do we have a sequenced stream event */
-	if (event == SND_SOC_DAPM_STREAM_START) {
-		c = ARRAY_SIZE(dapm_up_seq);
-		seq = dapm_up_seq;
-	} else if (event == SND_SOC_DAPM_STREAM_STOP) {
-		c = ARRAY_SIZE(dapm_down_seq);
-		seq = dapm_down_seq;
+	INIT_LIST_HEAD(&codec->up_list);
+	INIT_LIST_HEAD(&codec->down_list);
+
+	/* Check which widgets we need to power and store them in
+	 * lists indicating if they should be powered up or down.
+	 */
+	list_for_each_entry(w, &codec->dapm_widgets, list) {
+		switch (w->id) {
+		case snd_soc_dapm_pre:
+			list_add_tail(&codec->down_list, &w->power_list);
+			break;
+		case snd_soc_dapm_post:
+			list_add_tail(&codec->up_list, &w->power_list);
+			break;
+
+		default:
+			if (!w->power_check)
+				continue;
+
+			power = w->power_check(w);
+			if (power)
+				sys_power = 1;
+
+			if (w->power == power)
+				continue;
+
+			if (power)
+				list_add_tail(&w->power_list, &codec->up_list);
+			else
+				list_add_tail(&w->power_list,
+					      &codec->down_list);
+
+			w->power = power;
+			break;
+		}
 	}
 
-	for (i = 0; i < c; i++) {
-		list_for_each_entry(w, &codec->dapm_widgets, list) {
+	/* If we're changing to all on or all off then prepare */
+	if ((sys_power && codec->bias_level == SND_SOC_BIAS_STANDBY) ||
+	    (!sys_power && codec->bias_level == SND_SOC_BIAS_ON)) {
+		ret = snd_soc_dapm_set_bias_level(socdev,
+						  SND_SOC_BIAS_PREPARE);
+		if (ret != 0)
+			pr_err("Failed to prepare bias: %d\n", ret);
+	}
 
+	/* Power down widgets first; try to avoid amplifying pops. */
+	for (i = 0; i < ARRAY_SIZE(dapm_down_seq); i++) {
+		list_for_each_entry(w, &codec->down_list, power_list) {
 			/* is widget in stream order */
-			if (seq && seq[i] && w->id != seq[i])
+			if (w->id != dapm_down_seq[i])
 				continue;
 
 			ret = dapm_power_widget(codec, event, w);
 			if (ret != 0)
-				return ret;
+				pr_err("Failed to power down %s: %d\n",
+				       w->name, ret);
 		}
 	}
 
+	/* Now power up. */
+	for (i = 0; i < ARRAY_SIZE(dapm_up_seq); i++) {
+		list_for_each_entry(w, &codec->up_list, power_list) {
+			/* is widget in stream order */
+			if (w->id != dapm_up_seq[i])
+				continue;
+
+			ret = dapm_power_widget(codec, event, w);
+			if (ret != 0)
+				pr_err("Failed to power up %s: %d\n",
+				       w->name, ret);
+		}
+	}
+
+	/* If we just powered the last thing off drop to standby bias */
+	if (codec->bias_level == SND_SOC_BIAS_PREPARE && !sys_power) {
+		ret = snd_soc_dapm_set_bias_level(socdev,
+						  SND_SOC_BIAS_STANDBY);
+		if (ret != 0)
+			pr_err("Failed to apply standby bias: %d\n", ret);
+	}
+
+	/* If we just powered up then move to active bias */
+	if (codec->bias_level == SND_SOC_BIAS_PREPARE && sys_power) {
+		ret = snd_soc_dapm_set_bias_level(socdev,
+						  SND_SOC_BIAS_ON);
+		if (ret != 0)
+			pr_err("Failed to apply active bias: %d\n", ret);
+	}
+
 	return 0;
 }
 
@@ -723,6 +880,7 @@
 		case snd_soc_dapm_pga:
 		case snd_soc_dapm_mixer:
 		case snd_soc_dapm_mixer_named_ctl:
+		case snd_soc_dapm_supply:
 			if (w->name) {
 				in = is_connected_input_ep(w);
 				dapm_clear_walk(w->codec);
@@ -851,6 +1009,7 @@
 		case snd_soc_dapm_pga:
 		case snd_soc_dapm_mixer:
 		case snd_soc_dapm_mixer_named_ctl:
+		case snd_soc_dapm_supply:
 			if (w->name)
 				count += sprintf(buf + count, "%s: %s\n",
 					w->name, w->power ? "On":"Off");
@@ -883,16 +1042,12 @@
 
 int snd_soc_dapm_sys_add(struct device *dev)
 {
-	if (!dapm_status)
-		return 0;
 	return device_create_file(dev, &dev_attr_dapm_widget);
 }
 
 static void snd_soc_dapm_sys_remove(struct device *dev)
 {
-	if (dapm_status) {
-		device_remove_file(dev, &dev_attr_dapm_widget);
-	}
+	device_remove_file(dev, &dev_attr_dapm_widget);
 }
 
 /* free all dapm widgets and resources */
@@ -1015,6 +1170,7 @@
 	case snd_soc_dapm_vmid:
 	case snd_soc_dapm_pre:
 	case snd_soc_dapm_post:
+	case snd_soc_dapm_supply:
 		list_add(&path->list, &codec->dapm_paths);
 		list_add(&path->list_sink, &wsink->sources);
 		list_add(&path->list_source, &wsource->sinks);
@@ -1108,15 +1264,22 @@
 		case snd_soc_dapm_switch:
 		case snd_soc_dapm_mixer:
 		case snd_soc_dapm_mixer_named_ctl:
+			w->power_check = dapm_generic_check_power;
 			dapm_new_mixer(codec, w);
 			break;
 		case snd_soc_dapm_mux:
 		case snd_soc_dapm_value_mux:
+			w->power_check = dapm_generic_check_power;
 			dapm_new_mux(codec, w);
 			break;
 		case snd_soc_dapm_adc:
+			w->power_check = dapm_adc_check_power;
+			break;
 		case snd_soc_dapm_dac:
+			w->power_check = dapm_dac_check_power;
+			break;
 		case snd_soc_dapm_pga:
+			w->power_check = dapm_generic_check_power;
 			dapm_new_pga(codec, w);
 			break;
 		case snd_soc_dapm_input:
@@ -1126,6 +1289,10 @@
 		case snd_soc_dapm_hp:
 		case snd_soc_dapm_mic:
 		case snd_soc_dapm_line:
+			w->power_check = dapm_generic_check_power;
+			break;
+		case snd_soc_dapm_supply:
+			w->power_check = dapm_supply_check_power;
 		case snd_soc_dapm_vmid:
 		case snd_soc_dapm_pre:
 		case snd_soc_dapm_post:
@@ -1626,35 +1793,11 @@
 EXPORT_SYMBOL_GPL(snd_soc_dapm_stream_event);
 
 /**
- * snd_soc_dapm_set_bias_level - set the bias level for the system
- * @socdev: audio device
- * @level: level to configure
- *
- * Configure the bias (power) levels for the SoC audio device.
- *
- * Returns 0 for success else error.
- */
-int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
-				enum snd_soc_bias_level level)
-{
-	struct snd_soc_card *card = socdev->card;
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret = 0;
-
-	if (card->set_bias_level)
-		ret = card->set_bias_level(card, level);
-	if (ret == 0 && codec->set_bias_level)
-		ret = codec->set_bias_level(codec, level);
-
-	return ret;
-}
-
-/**
  * snd_soc_dapm_enable_pin - enable pin.
  * @codec: SoC codec
  * @pin: pin name
  *
- * Enables input/output pin and it's parents or children widgets iff there is
+ * Enables input/output pin and its parents or children widgets iff there is
  * a valid audio route and active audio stream.
  * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
  * do any widget power switching.
@@ -1670,7 +1813,7 @@
  * @codec: SoC codec
  * @pin: pin name
  *
- * Disables input/output pin and it's parents or children widgets.
+ * Disables input/output pin and its parents or children widgets.
  * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
  * do any widget power switching.
  */
diff --git a/sound/soc/txx9/Kconfig b/sound/soc/txx9/Kconfig
new file mode 100644
index 0000000..ebc9327
--- /dev/null
+++ b/sound/soc/txx9/Kconfig
@@ -0,0 +1,29 @@
+##
+## TXx9 ACLC
+##
+config SND_SOC_TXX9ACLC
+	tristate "SoC Audio for TXx9"
+	depends on HAS_TXX9_ACLC && TXX9_DMAC
+	help
+	  This option enables support for the AC Link Controllers in TXx9 SoC.
+
+config HAS_TXX9_ACLC
+	bool
+
+config SND_SOC_TXX9ACLC_AC97
+	tristate
+	select AC97_BUS
+	select SND_AC97_CODEC
+	select SND_SOC_AC97_BUS
+
+
+##
+## Boards
+##
+config SND_SOC_TXX9ACLC_GENERIC
+	tristate "Generic TXx9 ACLC sound machine"
+	depends on SND_SOC_TXX9ACLC
+	select SND_SOC_TXX9ACLC_AC97
+	select SND_SOC_AC97_CODEC
+	help
+	  This is a generic AC97 sound machine for use in TXx9 based systems.
diff --git a/sound/soc/txx9/Makefile b/sound/soc/txx9/Makefile
new file mode 100644
index 0000000..551f16c
--- /dev/null
+++ b/sound/soc/txx9/Makefile
@@ -0,0 +1,11 @@
+# Platform
+snd-soc-txx9aclc-objs := txx9aclc.o
+snd-soc-txx9aclc-ac97-objs := txx9aclc-ac97.o
+
+obj-$(CONFIG_SND_SOC_TXX9ACLC) += snd-soc-txx9aclc.o
+obj-$(CONFIG_SND_SOC_TXX9ACLC_AC97) += snd-soc-txx9aclc-ac97.o
+
+# Machine
+snd-soc-txx9aclc-generic-objs := txx9aclc-generic.o
+
+obj-$(CONFIG_SND_SOC_TXX9ACLC_GENERIC) += snd-soc-txx9aclc-generic.o
diff --git a/sound/soc/txx9/txx9aclc-ac97.c b/sound/soc/txx9/txx9aclc-ac97.c
new file mode 100644
index 0000000..0f83bdb
--- /dev/null
+++ b/sound/soc/txx9/txx9aclc-ac97.c
@@ -0,0 +1,255 @@
+/*
+ * TXx9 ACLC AC97 driver
+ *
+ * Copyright (C) 2009 Atsushi Nemoto
+ *
+ * Based on RBTX49xx patch from CELF patch archive.
+ * (C) Copyright TOSHIBA CORPORATION 2004-2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include "txx9aclc.h"
+
+#define AC97_DIR	\
+	(SND_SOC_DAIDIR_PLAYBACK | SND_SOC_DAIDIR_CAPTURE)
+
+#define AC97_RATES	\
+	SNDRV_PCM_RATE_8000_48000
+
+#ifdef __BIG_ENDIAN
+#define AC97_FMTS	SNDRV_PCM_FMTBIT_S16_BE
+#else
+#define AC97_FMTS	SNDRV_PCM_FMTBIT_S16_LE
+#endif
+
+static DECLARE_WAIT_QUEUE_HEAD(ac97_waitq);
+
+/* REVISIT: How to find txx9aclc_soc_device from snd_ac97? */
+static struct txx9aclc_soc_device *txx9aclc_soc_dev;
+
+static int txx9aclc_regready(struct txx9aclc_soc_device *dev)
+{
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+
+	return __raw_readl(drvdata->base + ACINTSTS) & ACINT_REGACCRDY;
+}
+
+/* AC97 controller reads codec register */
+static unsigned short txx9aclc_ac97_read(struct snd_ac97 *ac97,
+					 unsigned short reg)
+{
+	struct txx9aclc_soc_device *dev = txx9aclc_soc_dev;
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+	u32 dat;
+
+	if (!(__raw_readl(base + ACINTSTS) & ACINT_CODECRDY(ac97->num)))
+		return 0xffff;
+	reg |= ac97->num << 7;
+	dat = (reg << ACREGACC_REG_SHIFT) | ACREGACC_READ;
+	__raw_writel(dat, base + ACREGACC);
+	__raw_writel(ACINT_REGACCRDY, base + ACINTEN);
+	if (!wait_event_timeout(ac97_waitq, txx9aclc_regready(dev), HZ)) {
+		__raw_writel(ACINT_REGACCRDY, base + ACINTDIS);
+		dev_err(dev->soc_dev.dev, "ac97 read timeout (reg %#x)\n", reg);
+		dat = 0xffff;
+		goto done;
+	}
+	dat = __raw_readl(base + ACREGACC);
+	if (((dat >> ACREGACC_REG_SHIFT) & 0xff) != reg) {
+		dev_err(dev->soc_dev.dev, "reg mismatch %x with %x\n",
+			dat, reg);
+		dat = 0xffff;
+		goto done;
+	}
+	dat = (dat >> ACREGACC_DAT_SHIFT) & 0xffff;
+done:
+	__raw_writel(ACINT_REGACCRDY, base + ACINTDIS);
+	return dat;
+}
+
+/* AC97 controller writes to codec register */
+static void txx9aclc_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+				unsigned short val)
+{
+	struct txx9aclc_soc_device *dev = txx9aclc_soc_dev;
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+
+	__raw_writel(((reg | (ac97->num << 7)) << ACREGACC_REG_SHIFT) |
+		     (val << ACREGACC_DAT_SHIFT),
+		     base + ACREGACC);
+	__raw_writel(ACINT_REGACCRDY, base + ACINTEN);
+	if (!wait_event_timeout(ac97_waitq, txx9aclc_regready(dev), HZ)) {
+		dev_err(dev->soc_dev.dev,
+			"ac97 write timeout (reg %#x)\n", reg);
+	}
+	__raw_writel(ACINT_REGACCRDY, base + ACINTDIS);
+}
+
+static void txx9aclc_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	struct txx9aclc_soc_device *dev = txx9aclc_soc_dev;
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+	u32 ready = ACINT_CODECRDY(ac97->num) | ACINT_REGACCRDY;
+
+	__raw_writel(ACCTL_ENLINK, base + ACCTLDIS);
+	mmiowb();
+	udelay(1);
+	__raw_writel(ACCTL_ENLINK, base + ACCTLEN);
+	/* wait for primary codec ready status */
+	__raw_writel(ready, base + ACINTEN);
+	if (!wait_event_timeout(ac97_waitq,
+				(__raw_readl(base + ACINTSTS) & ready) == ready,
+				HZ)) {
+		dev_err(&ac97->dev, "primary codec is not ready "
+			"(status %#x)\n",
+			__raw_readl(base + ACINTSTS));
+	}
+	__raw_writel(ACINT_REGACCRDY, base + ACINTSTS);
+	__raw_writel(ready, base + ACINTDIS);
+}
+
+/* AC97 controller operations */
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read		= txx9aclc_ac97_read,
+	.write		= txx9aclc_ac97_write,
+	.reset		= txx9aclc_ac97_cold_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+static irqreturn_t txx9aclc_ac97_irq(int irq, void *dev_id)
+{
+	struct txx9aclc_plat_drvdata *drvdata = dev_id;
+	void __iomem *base = drvdata->base;
+
+	__raw_writel(__raw_readl(base + ACINTMSTS), base + ACINTDIS);
+	wake_up(&ac97_waitq);
+	return IRQ_HANDLED;
+}
+
+static int txx9aclc_ac97_probe(struct platform_device *pdev,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct txx9aclc_soc_device *dev =
+		container_of(socdev, struct txx9aclc_soc_device, soc_dev);
+
+	dev->aclc_pdev = to_platform_device(dai->dev);
+	txx9aclc_soc_dev = dev;
+	return 0;
+}
+
+static void txx9aclc_ac97_remove(struct platform_device *pdev,
+				 struct snd_soc_dai *dai)
+{
+	struct platform_device *aclc_pdev = to_platform_device(dai->dev);
+	struct txx9aclc_plat_drvdata *drvdata = platform_get_drvdata(aclc_pdev);
+
+	/* disable AC-link */
+	__raw_writel(ACCTL_ENLINK, drvdata->base + ACCTLDIS);
+	txx9aclc_soc_dev = NULL;
+}
+
+struct snd_soc_dai txx9aclc_ac97_dai = {
+	.name			= "txx9aclc_ac97",
+	.ac97_control		= 1,
+	.probe			= txx9aclc_ac97_probe,
+	.remove			= txx9aclc_ac97_remove,
+	.playback = {
+		.rates		= AC97_RATES,
+		.formats	= AC97_FMTS,
+		.channels_min	= 2,
+		.channels_max	= 2,
+	},
+	.capture = {
+		.rates		= AC97_RATES,
+		.formats	= AC97_FMTS,
+		.channels_min	= 2,
+		.channels_max	= 2,
+	},
+};
+EXPORT_SYMBOL_GPL(txx9aclc_ac97_dai);
+
+static int __devinit txx9aclc_ac97_dev_probe(struct platform_device *pdev)
+{
+	struct txx9aclc_plat_drvdata *drvdata;
+	struct resource *r;
+	int err;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -EBUSY;
+
+	if (!devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
+				     dev_name(&pdev->dev)))
+		return -EBUSY;
+
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, drvdata);
+	drvdata->physbase = r->start;
+	if (sizeof(drvdata->physbase) > sizeof(r->start) &&
+	    r->start >= TXX9_DIRECTMAP_BASE &&
+	    r->start < TXX9_DIRECTMAP_BASE + 0x400000)
+		drvdata->physbase |= 0xf00000000ull;
+	drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (!drvdata->base)
+		return -EBUSY;
+	err = devm_request_irq(&pdev->dev, irq, txx9aclc_ac97_irq,
+			       IRQF_DISABLED, dev_name(&pdev->dev), drvdata);
+	if (err < 0)
+		return err;
+
+	txx9aclc_ac97_dai.dev = &pdev->dev;
+	return snd_soc_register_dai(&txx9aclc_ac97_dai);
+}
+
+static int __devexit txx9aclc_ac97_dev_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_dai(&txx9aclc_ac97_dai);
+	return 0;
+}
+
+static struct platform_driver txx9aclc_ac97_driver = {
+	.probe		= txx9aclc_ac97_dev_probe,
+	.remove		= __devexit_p(txx9aclc_ac97_dev_remove),
+	.driver		= {
+		.name	= "txx9aclc-ac97",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init txx9aclc_ac97_init(void)
+{
+	return platform_driver_register(&txx9aclc_ac97_driver);
+}
+
+static void __exit txx9aclc_ac97_exit(void)
+{
+	platform_driver_unregister(&txx9aclc_ac97_driver);
+}
+
+module_init(txx9aclc_ac97_init);
+module_exit(txx9aclc_ac97_exit);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("TXx9 ACLC AC97 driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/txx9/txx9aclc-generic.c b/sound/soc/txx9/txx9aclc-generic.c
new file mode 100644
index 0000000..3175de9
--- /dev/null
+++ b/sound/soc/txx9/txx9aclc-generic.c
@@ -0,0 +1,98 @@
+/*
+ * Generic TXx9 ACLC machine driver
+ *
+ * Copyright (C) 2009 Atsushi Nemoto
+ *
+ * Based on RBTX49xx patch from CELF patch archive.
+ * (C) Copyright TOSHIBA CORPORATION 2004-2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This is a very generic AC97 sound machine driver for boards which
+ * have (AC97) audio at ACLC (e.g. RBTX49XX boards).
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include "../codecs/ac97.h"
+#include "txx9aclc.h"
+
+static struct snd_soc_dai_link txx9aclc_generic_dai = {
+	.name = "AC97",
+	.stream_name = "AC97 HiFi",
+	.cpu_dai = &txx9aclc_ac97_dai,
+	.codec_dai = &ac97_dai,
+};
+
+static struct snd_soc_card txx9aclc_generic_card = {
+	.name		= "Generic TXx9 ACLC Audio",
+	.platform	= &txx9aclc_soc_platform,
+	.dai_link	= &txx9aclc_generic_dai,
+	.num_links	= 1,
+};
+
+static struct txx9aclc_soc_device txx9aclc_generic_soc_device = {
+	.soc_dev = {
+		.card		= &txx9aclc_generic_card,
+		.codec_dev	= &soc_codec_dev_ac97,
+	},
+};
+
+static int __init txx9aclc_generic_probe(struct platform_device *pdev)
+{
+	struct txx9aclc_soc_device *dev = &txx9aclc_generic_soc_device;
+	struct platform_device *soc_pdev;
+	int ret;
+
+	soc_pdev = platform_device_alloc("soc-audio", -1);
+	if (!soc_pdev)
+		return -ENOMEM;
+	platform_set_drvdata(soc_pdev, &dev->soc_dev);
+	dev->soc_dev.dev = &soc_pdev->dev;
+	ret = platform_device_add(soc_pdev);
+	if (ret) {
+		platform_device_put(soc_pdev);
+		return ret;
+	}
+	platform_set_drvdata(pdev, soc_pdev);
+	return 0;
+}
+
+static int __exit txx9aclc_generic_remove(struct platform_device *pdev)
+{
+	struct platform_device *soc_pdev = platform_get_drvdata(pdev);
+
+	platform_device_unregister(soc_pdev);
+	return 0;
+}
+
+static struct platform_driver txx9aclc_generic_driver = {
+	.remove = txx9aclc_generic_remove,
+	.driver = {
+		.name = "txx9aclc-generic",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init txx9aclc_generic_init(void)
+{
+	return platform_driver_probe(&txx9aclc_generic_driver,
+				     txx9aclc_generic_probe);
+}
+
+static void __exit txx9aclc_generic_exit(void)
+{
+	platform_driver_unregister(&txx9aclc_generic_driver);
+}
+
+module_init(txx9aclc_generic_init);
+module_exit(txx9aclc_generic_exit);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("Generic TXx9 ACLC ALSA SoC audio driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/txx9/txx9aclc.c b/sound/soc/txx9/txx9aclc.c
new file mode 100644
index 0000000..fa33661
--- /dev/null
+++ b/sound/soc/txx9/txx9aclc.c
@@ -0,0 +1,430 @@
+/*
+ * Generic TXx9 ACLC platform driver
+ *
+ * Copyright (C) 2009 Atsushi Nemoto
+ *
+ * Based on RBTX49xx patch from CELF patch archive.
+ * (C) Copyright TOSHIBA CORPORATION 2004-2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include "txx9aclc.h"
+
+static const struct snd_pcm_hardware txx9aclc_pcm_hardware = {
+	/*
+	 * REVISIT: SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID
+	 * needs more works for noncoherent MIPS.
+	 */
+	.info		  = SNDRV_PCM_INFO_INTERLEAVED |
+			    SNDRV_PCM_INFO_BATCH |
+			    SNDRV_PCM_INFO_PAUSE,
+#ifdef __BIG_ENDIAN
+	.formats	  = SNDRV_PCM_FMTBIT_S16_BE,
+#else
+	.formats	  = SNDRV_PCM_FMTBIT_S16_LE,
+#endif
+	.period_bytes_min = 1024,
+	.period_bytes_max = 8 * 1024,
+	.periods_min	  = 2,
+	.periods_max	  = 4096,
+	.buffer_bytes_max = 32 * 1024,
+};
+
+static int txx9aclc_pcm_hw_params(struct snd_pcm_substream *substream,
+				  struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct txx9aclc_dmadata *dmadata = runtime->private_data;
+	int ret;
+
+	ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(socdev->dev,
+		"runtime->dma_area = %#lx dma_addr = %#lx dma_bytes = %zd "
+		"runtime->min_align %ld\n",
+		(unsigned long)runtime->dma_area,
+		(unsigned long)runtime->dma_addr, runtime->dma_bytes,
+		runtime->min_align);
+	dev_dbg(socdev->dev,
+		"periods %d period_bytes %d stream %d\n",
+		params_periods(params), params_period_bytes(params),
+		substream->stream);
+
+	dmadata->substream = substream;
+	dmadata->pos = 0;
+	return 0;
+}
+
+static int txx9aclc_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_lib_free_pages(substream);
+}
+
+static int txx9aclc_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct txx9aclc_dmadata *dmadata = runtime->private_data;
+
+	dmadata->dma_addr = runtime->dma_addr;
+	dmadata->buffer_bytes = snd_pcm_lib_buffer_bytes(substream);
+	dmadata->period_bytes = snd_pcm_lib_period_bytes(substream);
+
+	if (dmadata->buffer_bytes == dmadata->period_bytes) {
+		dmadata->frag_bytes = dmadata->period_bytes >> 1;
+		dmadata->frags = 2;
+	} else {
+		dmadata->frag_bytes = dmadata->period_bytes;
+		dmadata->frags = dmadata->buffer_bytes / dmadata->period_bytes;
+	}
+	dmadata->frag_count = 0;
+	dmadata->pos = 0;
+	return 0;
+}
+
+static void txx9aclc_dma_complete(void *arg)
+{
+	struct txx9aclc_dmadata *dmadata = arg;
+	unsigned long flags;
+
+	/* dma completion handler cannot submit new operations */
+	spin_lock_irqsave(&dmadata->dma_lock, flags);
+	if (dmadata->frag_count >= 0) {
+		dmadata->dmacount--;
+		BUG_ON(dmadata->dmacount < 0);
+		tasklet_schedule(&dmadata->tasklet);
+	}
+	spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+}
+
+static struct dma_async_tx_descriptor *
+txx9aclc_dma_submit(struct txx9aclc_dmadata *dmadata, dma_addr_t buf_dma_addr)
+{
+	struct dma_chan *chan = dmadata->dma_chan;
+	struct dma_async_tx_descriptor *desc;
+	struct scatterlist sg;
+
+	sg_init_table(&sg, 1);
+	sg_set_page(&sg, pfn_to_page(PFN_DOWN(buf_dma_addr)),
+		    dmadata->frag_bytes, buf_dma_addr & (PAGE_SIZE - 1));
+	sg_dma_address(&sg) = buf_dma_addr;
+	desc = chan->device->device_prep_slave_sg(chan, &sg, 1,
+		dmadata->substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		DMA_TO_DEVICE : DMA_FROM_DEVICE,
+		DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		dev_err(&chan->dev->device, "cannot prepare slave dma\n");
+		return NULL;
+	}
+	desc->callback = txx9aclc_dma_complete;
+	desc->callback_param = dmadata;
+	desc->tx_submit(desc);
+	return desc;
+}
+
+#define NR_DMA_CHAIN		2
+
+static void txx9aclc_dma_tasklet(unsigned long data)
+{
+	struct txx9aclc_dmadata *dmadata = (struct txx9aclc_dmadata *)data;
+	struct dma_chan *chan = dmadata->dma_chan;
+	struct dma_async_tx_descriptor *desc;
+	struct snd_pcm_substream *substream = dmadata->substream;
+	u32 ctlbit = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		ACCTL_AUDODMA : ACCTL_AUDIDMA;
+	int i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dmadata->dma_lock, flags);
+	if (dmadata->frag_count < 0) {
+		struct txx9aclc_soc_device *dev =
+			container_of(dmadata, struct txx9aclc_soc_device,
+				     dmadata[substream->stream]);
+		struct txx9aclc_plat_drvdata *drvdata =
+			txx9aclc_get_plat_drvdata(dev);
+		void __iomem *base = drvdata->base;
+
+		spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+		chan->device->device_terminate_all(chan);
+		/* first time */
+		for (i = 0; i < NR_DMA_CHAIN; i++) {
+			desc = txx9aclc_dma_submit(dmadata,
+				dmadata->dma_addr + i * dmadata->frag_bytes);
+			if (!desc)
+				return;
+		}
+		dmadata->dmacount = NR_DMA_CHAIN;
+		chan->device->device_issue_pending(chan);
+		spin_lock_irqsave(&dmadata->dma_lock, flags);
+		__raw_writel(ctlbit, base + ACCTLEN);
+		dmadata->frag_count = NR_DMA_CHAIN % dmadata->frags;
+		spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+		return;
+	}
+	BUG_ON(dmadata->dmacount >= NR_DMA_CHAIN);
+	while (dmadata->dmacount < NR_DMA_CHAIN) {
+		dmadata->dmacount++;
+		spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+		desc = txx9aclc_dma_submit(dmadata,
+			dmadata->dma_addr +
+			dmadata->frag_count * dmadata->frag_bytes);
+		if (!desc)
+			return;
+		chan->device->device_issue_pending(chan);
+
+		spin_lock_irqsave(&dmadata->dma_lock, flags);
+		dmadata->frag_count++;
+		dmadata->frag_count %= dmadata->frags;
+		dmadata->pos += dmadata->frag_bytes;
+		dmadata->pos %= dmadata->buffer_bytes;
+		if ((dmadata->frag_count * dmadata->frag_bytes) %
+		    dmadata->period_bytes == 0)
+			snd_pcm_period_elapsed(substream);
+	}
+	spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+}
+
+static int txx9aclc_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct txx9aclc_dmadata *dmadata = substream->runtime->private_data;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct txx9aclc_soc_device *dev =
+		container_of(rtd->socdev, struct txx9aclc_soc_device, soc_dev);
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+	unsigned long flags;
+	int ret = 0;
+	u32 ctlbit = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		ACCTL_AUDODMA : ACCTL_AUDIDMA;
+
+	spin_lock_irqsave(&dmadata->dma_lock, flags);
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		dmadata->frag_count = -1;
+		tasklet_schedule(&dmadata->tasklet);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		__raw_writel(ctlbit, base + ACCTLDIS);
+		break;
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		__raw_writel(ctlbit, base + ACCTLEN);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+	return ret;
+}
+
+static snd_pcm_uframes_t
+txx9aclc_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct txx9aclc_dmadata *dmadata = substream->runtime->private_data;
+
+	return bytes_to_frames(substream->runtime, dmadata->pos);
+}
+
+static int txx9aclc_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct txx9aclc_soc_device *dev =
+		container_of(rtd->socdev, struct txx9aclc_soc_device, soc_dev);
+	struct txx9aclc_dmadata *dmadata = &dev->dmadata[substream->stream];
+	int ret;
+
+	ret = snd_soc_set_runtime_hwparams(substream, &txx9aclc_pcm_hardware);
+	if (ret)
+		return ret;
+	/* ensure that buffer size is a multiple of period size */
+	ret = snd_pcm_hw_constraint_integer(substream->runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (ret < 0)
+		return ret;
+	substream->runtime->private_data = dmadata;
+	return 0;
+}
+
+static int txx9aclc_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct txx9aclc_dmadata *dmadata = substream->runtime->private_data;
+	struct dma_chan *chan = dmadata->dma_chan;
+
+	dmadata->frag_count = -1;
+	chan->device->device_terminate_all(chan);
+	return 0;
+}
+
+static struct snd_pcm_ops txx9aclc_pcm_ops = {
+	.open		= txx9aclc_pcm_open,
+	.close		= txx9aclc_pcm_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= txx9aclc_pcm_hw_params,
+	.hw_free	= txx9aclc_pcm_hw_free,
+	.prepare	= txx9aclc_pcm_prepare,
+	.trigger	= txx9aclc_pcm_trigger,
+	.pointer	= txx9aclc_pcm_pointer,
+};
+
+static void txx9aclc_pcm_free_dma_buffers(struct snd_pcm *pcm)
+{
+	snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static int txx9aclc_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+			    struct snd_pcm *pcm)
+{
+	return snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+		card->dev, 64 * 1024, 4 * 1024 * 1024);
+}
+
+static bool filter(struct dma_chan *chan, void *param)
+{
+	struct txx9aclc_dmadata *dmadata = param;
+	char devname[BUS_ID_SIZE + 2];
+
+	sprintf(devname, "%s.%d", dmadata->dma_res->name,
+		(int)dmadata->dma_res->start);
+	if (strcmp(dev_name(chan->device->dev), devname) == 0) {
+		chan->private = &dmadata->dma_slave;
+		return true;
+	}
+	return false;
+}
+
+static int txx9aclc_dma_init(struct txx9aclc_soc_device *dev,
+			     struct txx9aclc_dmadata *dmadata)
+{
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	struct txx9dmac_slave *ds = &dmadata->dma_slave;
+	dma_cap_mask_t mask;
+
+	spin_lock_init(&dmadata->dma_lock);
+
+	ds->reg_width = sizeof(u32);
+	if (dmadata->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		ds->tx_reg = drvdata->physbase + ACAUDODAT;
+		ds->rx_reg = 0;
+	} else {
+		ds->tx_reg = 0;
+		ds->rx_reg = drvdata->physbase + ACAUDIDAT;
+	}
+
+	/* Try to grab a DMA channel */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dmadata->dma_chan = dma_request_channel(mask, filter, dmadata);
+	if (!dmadata->dma_chan) {
+		dev_err(dev->soc_dev.dev,
+			"DMA channel for %s is not available\n",
+			dmadata->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+			"playback" : "capture");
+		return -EBUSY;
+	}
+	tasklet_init(&dmadata->tasklet, txx9aclc_dma_tasklet,
+		     (unsigned long)dmadata);
+	return 0;
+}
+
+static int txx9aclc_pcm_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct txx9aclc_soc_device *dev =
+		container_of(socdev, struct txx9aclc_soc_device, soc_dev);
+	struct resource *r;
+	int i;
+	int ret;
+
+	dev->dmadata[0].stream = SNDRV_PCM_STREAM_PLAYBACK;
+	dev->dmadata[1].stream = SNDRV_PCM_STREAM_CAPTURE;
+	for (i = 0; i < 2; i++) {
+		r = platform_get_resource(dev->aclc_pdev, IORESOURCE_DMA, i);
+		if (!r) {
+			ret = -EBUSY;
+			goto exit;
+		}
+		dev->dmadata[i].dma_res = r;
+		ret = txx9aclc_dma_init(dev, &dev->dmadata[i]);
+		if (ret)
+			goto exit;
+	}
+	return 0;
+
+exit:
+	for (i = 0; i < 2; i++) {
+		if (dev->dmadata[i].dma_chan)
+			dma_release_channel(dev->dmadata[i].dma_chan);
+		dev->dmadata[i].dma_chan = NULL;
+	}
+	return ret;
+}
+
+static int txx9aclc_pcm_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct txx9aclc_soc_device *dev =
+		container_of(socdev, struct txx9aclc_soc_device, soc_dev);
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+	int i;
+
+	/* disable all FIFO DMAs */
+	__raw_writel(ACCTL_AUDODMA | ACCTL_AUDIDMA, base + ACCTLDIS);
+	/* dummy R/W to clear pending DMAREQ if any */
+	__raw_writel(__raw_readl(base + ACAUDIDAT), base + ACAUDODAT);
+
+	for (i = 0; i < 2; i++) {
+		struct txx9aclc_dmadata *dmadata = &dev->dmadata[i];
+		struct dma_chan *chan = dmadata->dma_chan;
+		if (chan) {
+			dmadata->frag_count = -1;
+			chan->device->device_terminate_all(chan);
+			dma_release_channel(chan);
+		}
+		dev->dmadata[i].dma_chan = NULL;
+	}
+	return 0;
+}
+
+struct snd_soc_platform txx9aclc_soc_platform = {
+	.name		= "txx9aclc-audio",
+	.probe		= txx9aclc_pcm_probe,
+	.remove		= txx9aclc_pcm_remove,
+	.pcm_ops 	= &txx9aclc_pcm_ops,
+	.pcm_new	= txx9aclc_pcm_new,
+	.pcm_free	= txx9aclc_pcm_free_dma_buffers,
+};
+EXPORT_SYMBOL_GPL(txx9aclc_soc_platform);
+
+static int __init txx9aclc_soc_platform_init(void)
+{
+	return snd_soc_register_platform(&txx9aclc_soc_platform);
+}
+
+static void __exit txx9aclc_soc_platform_exit(void)
+{
+	snd_soc_unregister_platform(&txx9aclc_soc_platform);
+}
+
+module_init(txx9aclc_soc_platform_init);
+module_exit(txx9aclc_soc_platform_exit);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("TXx9 ACLC Audio DMA driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/txx9/txx9aclc.h b/sound/soc/txx9/txx9aclc.h
new file mode 100644
index 0000000..6769aab
--- /dev/null
+++ b/sound/soc/txx9/txx9aclc.h
@@ -0,0 +1,83 @@
+/*
+ * TXx9 SoC AC Link Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __TXX9ACLC_H
+#define __TXX9ACLC_H
+
+#include <linux/interrupt.h>
+#include <asm/txx9/dmac.h>
+
+#define ACCTLEN			0x00	/* control enable */
+#define ACCTLDIS		0x04	/* control disable */
+#define   ACCTL_ENLINK		0x00000001	/* enable/disable AC-link */
+#define   ACCTL_AUDODMA		0x00000100	/* AUDODMA enable/disable */
+#define   ACCTL_AUDIDMA		0x00001000	/* AUDIDMA enable/disable */
+#define   ACCTL_AUDOEHLT	0x00010000	/* AUDO error halt
+						   enable/disable */
+#define   ACCTL_AUDIEHLT	0x00100000	/* AUDI error halt
+						   enable/disable */
+#define ACREGACC		0x08	/* codec register access */
+#define   ACREGACC_DAT_SHIFT	0	/* data field */
+#define   ACREGACC_REG_SHIFT	16	/* address field */
+#define   ACREGACC_CODECID_SHIFT	24	/* CODEC ID field */
+#define   ACREGACC_READ		0x80000000	/* CODEC read */
+#define   ACREGACC_WRITE	0x00000000	/* CODEC write */
+#define ACINTSTS		0x10	/* interrupt status */
+#define ACINTMSTS		0x14	/* interrupt masked status */
+#define ACINTEN			0x18	/* interrupt enable */
+#define ACINTDIS		0x1c	/* interrupt disable */
+#define   ACINT_CODECRDY(n)	(0x00000001 << (n))	/* CODECn ready */
+#define   ACINT_REGACCRDY	0x00000010	/* ACREGACC ready */
+#define   ACINT_AUDOERR		0x00000100	/* AUDO underrun error */
+#define   ACINT_AUDIERR		0x00001000	/* AUDI overrun error */
+#define ACDMASTS		0x80	/* DMA request status */
+#define   ACDMA_AUDO		0x00000001	/* AUDODMA pending */
+#define   ACDMA_AUDI		0x00000010	/* AUDIDMA pending */
+#define ACAUDODAT		0xa0	/* audio out data */
+#define ACAUDIDAT		0xb0	/* audio in data */
+#define ACREVID			0xfc	/* revision ID */
+
+struct txx9aclc_dmadata {
+	struct resource *dma_res;
+	struct txx9dmac_slave dma_slave;
+	struct dma_chan *dma_chan;
+	struct tasklet_struct tasklet;
+	spinlock_t dma_lock;
+	int stream; /* SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE */
+	struct snd_pcm_substream *substream;
+	unsigned long pos;
+	dma_addr_t dma_addr;
+	unsigned long buffer_bytes;
+	unsigned long period_bytes;
+	unsigned long frag_bytes;
+	int frags;
+	int frag_count;
+	int dmacount;
+};
+
+struct txx9aclc_plat_drvdata {
+	void __iomem *base;
+	u64 physbase;
+};
+
+struct txx9aclc_soc_device {
+	struct snd_soc_device soc_dev;
+	struct platform_device *aclc_pdev;	/* for ioresources, drvdata */
+	struct txx9aclc_dmadata dmadata[2];
+};
+
+static inline struct txx9aclc_plat_drvdata *txx9aclc_get_plat_drvdata(
+	struct txx9aclc_soc_device *sdev)
+{
+	return platform_get_drvdata(sdev->aclc_pdev);
+}
+
+extern struct snd_soc_platform txx9aclc_soc_platform;
+extern struct snd_soc_dai txx9aclc_ac97_dai;
+
+#endif /* __TXX9ACLC_H */
diff --git a/sound/synth/Makefile b/sound/synth/Makefile
index e99fd76..11eb06a 100644
--- a/sound/synth/Makefile
+++ b/sound/synth/Makefile
@@ -5,16 +5,8 @@
 
 snd-util-mem-objs := util_mem.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_EMU10K1) += snd-util-mem.o
 obj-$(CONFIG_SND_TRIDENT) += snd-util-mem.o
-obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-util-mem.o
-obj-$(call sequencer,$(CONFIG_SND)) += emux/
+obj-$(CONFIG_SND_SBAWE_SEQ) += snd-util-mem.o
+obj-$(CONFIG_SND_SEQUENCER) += emux/
diff --git a/sound/synth/emux/Makefile b/sound/synth/emux/Makefile
index b690352..328594e 100644
--- a/sound/synth/emux/Makefile
+++ b/sound/synth/emux/Makefile
@@ -7,14 +7,6 @@
 		       emux_effect.o emux_proc.o emux_hwdep.o soundfont.o \
 		       $(if $(CONFIG_SND_SEQUENCER_OSS),emux_oss.o)
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 # Toplevel Module Dependencies
-obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-emux-synth.o
-obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-emux-synth.o
+obj-$(CONFIG_SND_SBAWE_SEQ) += snd-emux-synth.o
+obj-$(CONFIG_SND_EMU10K1_SEQ) += snd-emux-synth.o
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index b13ce76..b144513 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -42,10 +42,10 @@
 	(stream << 1) | (~(i / (dev->n_streams * BYTES_PER_SAMPLE_USB)) & 1)
 
 static struct snd_pcm_hardware snd_usb_caiaq_pcm_hardware = {
-	.info 		= (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | 
+	.info 		= (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
 			   SNDRV_PCM_INFO_BLOCK_TRANSFER),
 	.formats 	= SNDRV_PCM_FMTBIT_S24_3BE,
-	.rates 		= (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | 
+	.rates 		= (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
 			   SNDRV_PCM_RATE_96000),
 	.rate_min	= 44100,
 	.rate_max	= 0, /* will overwrite later */
@@ -68,7 +68,7 @@
 		dev->sub_capture[sub->number] = sub;
 }
 
-static void 
+static void
 deactivate_substream(struct snd_usb_caiaqdev *dev,
 		     struct snd_pcm_substream *sub)
 {
@@ -118,7 +118,7 @@
 			return -EPIPE;
 		}
 	}
-	
+
 	return 0;
 }
 
@@ -129,7 +129,7 @@
 	debug("%s(%p)\n", __func__, dev);
 	if (!dev->streaming)
 		return;
-	
+
 	dev->streaming = 0;
 
 	for (i = 0; i < N_URBS; i++) {
@@ -154,7 +154,7 @@
 	debug("%s(%p)\n", __func__, substream);
 	if (all_substreams_zero(dev->sub_playback) &&
 	    all_substreams_zero(dev->sub_capture)) {
-		/* when the last client has stopped streaming, 
+		/* when the last client has stopped streaming,
 		 * all sample rates are allowed again */
 		stream_stop(dev);
 		dev->pcm_info.rates = dev->samplerates;
@@ -194,7 +194,7 @@
 	struct snd_pcm_runtime *runtime = substream->runtime;
 
 	debug("%s(%p)\n", __func__, substream);
-	
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		dev->period_out_count[index] = BYTES_PER_SAMPLE + 1;
 		dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1;
@@ -205,19 +205,19 @@
 
 	if (dev->streaming)
 		return 0;
-	
+
 	/* the first client that opens a stream defines the sample rate
 	 * setting for all subsequent calls, until the last client closed. */
 	for (i=0; i < ARRAY_SIZE(rates); i++)
 		if (runtime->rate == rates[i])
 			dev->pcm_info.rates = 1 << i;
-	
+
 	snd_pcm_limit_hw_rates(runtime);
 
 	bytes_per_sample = BYTES_PER_SAMPLE;
 	if (dev->spec.data_alignment == 2)
 		bytes_per_sample++;
-	
+
 	bpp = ((runtime->rate / 8000) + CLOCK_DRIFT_TOLERANCE)
 		* bytes_per_sample * CHANNELS_PER_STREAM * dev->n_streams;
 
@@ -232,7 +232,7 @@
 	ret = stream_start(dev);
 	if (ret)
 		return ret;
-	
+
 	dev->output_running = 0;
 	wait_event_timeout(dev->prepare_wait_queue, dev->output_running, HZ);
 	if (!dev->output_running) {
@@ -273,7 +273,7 @@
 		return SNDRV_PCM_POS_XRUN;
 
 	if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		return bytes_to_frames(sub->runtime, 
+		return bytes_to_frames(sub->runtime,
 					dev->audio_out_buf_pos[index]);
 	else
 		return bytes_to_frames(sub->runtime,
@@ -291,7 +291,7 @@
 	.trigger =	snd_usb_caiaq_pcm_trigger,
 	.pointer =	snd_usb_caiaq_pcm_pointer
 };
-	
+
 static void check_for_elapsed_periods(struct snd_usb_caiaqdev *dev,
 				      struct snd_pcm_substream **subs)
 {
@@ -333,7 +333,7 @@
 				struct snd_pcm_runtime *rt = sub->runtime;
 				char *audio_buf = rt->dma_area;
 				int sz = frames_to_bytes(rt, rt->buffer_size);
-				audio_buf[dev->audio_in_buf_pos[stream]++] 
+				audio_buf[dev->audio_in_buf_pos[stream]++]
 					= usb_buf[i];
 				dev->period_in_count[stream]++;
 				if (dev->audio_in_buf_pos[stream] == sz)
@@ -354,14 +354,14 @@
 
 	for (i = 0; i < iso->actual_length;) {
 		if (i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 0) {
-			for (stream = 0; 
-			     stream < dev->n_streams; 
+			for (stream = 0;
+			     stream < dev->n_streams;
 			     stream++, i++) {
 				if (dev->first_packet)
 					continue;
 
 				check_byte = MAKE_CHECKBYTE(dev, stream, i);
-				
+
 				if ((usb_buf[i] & 0x3f) != check_byte)
 					dev->input_panic = 1;
 
@@ -410,21 +410,21 @@
 	}
 
 	if ((dev->input_panic || dev->output_panic) && !dev->warned) {
-		debug("streaming error detected %s %s\n", 
+		debug("streaming error detected %s %s\n",
 				dev->input_panic ? "(input)" : "",
 				dev->output_panic ? "(output)" : "");
 		dev->warned = 1;
 	}
 }
 
-static void fill_out_urb(struct snd_usb_caiaqdev *dev, 
-			 struct urb *urb, 
+static void fill_out_urb(struct snd_usb_caiaqdev *dev,
+			 struct urb *urb,
 			 const struct usb_iso_packet_descriptor *iso)
 {
 	unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
 	struct snd_pcm_substream *sub;
 	int stream, i;
-	
+
 	for (i = 0; i < iso->length;) {
 		for (stream = 0; stream < dev->n_streams; stream++, i++) {
 			sub = dev->sub_playback[stream];
@@ -444,7 +444,7 @@
 
 		/* fill in the check bytes */
 		if (dev->spec.data_alignment == 2 &&
-		    i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 
+		    i % (dev->n_streams * BYTES_PER_SAMPLE_USB) ==
 		    	(dev->n_streams * CHANNELS_PER_STREAM))
 		    for (stream = 0; stream < dev->n_streams; stream++, i++)
 		    	usb_buf[i] = MAKE_CHECKBYTE(dev, stream, i);
@@ -453,7 +453,7 @@
 
 static void read_completed(struct urb *urb)
 {
-	struct snd_usb_caiaq_cb_info *info = urb->context; 
+	struct snd_usb_caiaq_cb_info *info = urb->context;
 	struct snd_usb_caiaqdev *dev;
 	struct urb *out;
 	int frame, len, send_it = 0, outframe = 0;
@@ -478,7 +478,7 @@
 		out->iso_frame_desc[outframe].length = len;
 		out->iso_frame_desc[outframe].actual_length = 0;
 		out->iso_frame_desc[outframe].offset = BYTES_PER_FRAME * frame;
-		
+
 		if (len > 0) {
 			spin_lock(&dev->spinlock);
 			fill_out_urb(dev, out, &out->iso_frame_desc[outframe]);
@@ -497,14 +497,14 @@
 		out->transfer_flags = URB_ISO_ASAP;
 		usb_submit_urb(out, GFP_ATOMIC);
 	}
-	
+
 	/* re-submit inbound urb */
 	for (frame = 0; frame < FRAMES_PER_URB; frame++) {
 		urb->iso_frame_desc[frame].offset = BYTES_PER_FRAME * frame;
 		urb->iso_frame_desc[frame].length = BYTES_PER_FRAME;
 		urb->iso_frame_desc[frame].actual_length = 0;
 	}
-	
+
 	urb->number_of_packets = FRAMES_PER_URB;
 	urb->transfer_flags = URB_ISO_ASAP;
 	usb_submit_urb(urb, GFP_ATOMIC);
@@ -528,7 +528,7 @@
 	struct usb_device *usb_dev = dev->chip.dev;
 	unsigned int pipe;
 
-	pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ? 
+	pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ?
 		usb_sndisocpipe(usb_dev, ENDPOINT_PLAYBACK) :
 		usb_rcvisocpipe(usb_dev, ENDPOINT_CAPTURE);
 
@@ -547,25 +547,25 @@
 			return urbs;
 		}
 
-		urbs[i]->transfer_buffer = 
+		urbs[i]->transfer_buffer =
 			kmalloc(FRAMES_PER_URB * BYTES_PER_FRAME, GFP_KERNEL);
 		if (!urbs[i]->transfer_buffer) {
 			log("unable to kmalloc() transfer buffer, OOM!?\n");
 			*ret = -ENOMEM;
 			return urbs;
 		}
-		
+
 		for (frame = 0; frame < FRAMES_PER_URB; frame++) {
-			struct usb_iso_packet_descriptor *iso = 
+			struct usb_iso_packet_descriptor *iso =
 				&urbs[i]->iso_frame_desc[frame];
-			
+
 			iso->offset = BYTES_PER_FRAME * frame;
 			iso->length = BYTES_PER_FRAME;
 		}
-		
+
 		urbs[i]->dev = usb_dev;
 		urbs[i]->pipe = pipe;
-		urbs[i]->transfer_buffer_length = FRAMES_PER_URB 
+		urbs[i]->transfer_buffer_length = FRAMES_PER_URB
 						* BYTES_PER_FRAME;
 		urbs[i]->context = &dev->data_cb_info[i];
 		urbs[i]->interval = 1;
@@ -589,7 +589,7 @@
 	for (i = 0; i < N_URBS; i++) {
 		if (!urbs[i])
 			continue;
-		
+
 		usb_kill_urb(urbs[i]);
 		kfree(urbs[i]->transfer_buffer);
 		usb_free_urb(urbs[i]);
@@ -602,11 +602,11 @@
 {
 	int i, ret;
 
-	dev->n_audio_in  = max(dev->spec.num_analog_audio_in, 
-			       dev->spec.num_digital_audio_in) / 
+	dev->n_audio_in  = max(dev->spec.num_analog_audio_in,
+			       dev->spec.num_digital_audio_in) /
 				CHANNELS_PER_STREAM;
 	dev->n_audio_out = max(dev->spec.num_analog_audio_out,
-			       dev->spec.num_digital_audio_out) / 
+			       dev->spec.num_digital_audio_out) /
 				CHANNELS_PER_STREAM;
 	dev->n_streams = max(dev->n_audio_in, dev->n_audio_out);
 
@@ -619,7 +619,7 @@
 		return -EINVAL;
 	}
 
-	ret = snd_pcm_new(dev->chip.card, dev->product_name, 0, 
+	ret = snd_pcm_new(dev->chip.card, dev->product_name, 0,
 			dev->n_audio_out, dev->n_audio_in, &dev->pcm);
 
 	if (ret < 0) {
@@ -632,7 +632,7 @@
 
 	memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
 	memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
-	
+
 	memcpy(&dev->pcm_info, &snd_usb_caiaq_pcm_hardware,
 			sizeof(snd_usb_caiaq_pcm_hardware));
 
@@ -651,9 +651,9 @@
 		break;
 	}
 
-	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK, 
+	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK,
 				&snd_usb_caiaq_ops);
-	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE, 
+	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE,
 				&snd_usb_caiaq_ops);
 
 	snd_pcm_lib_preallocate_pages_for_all(dev->pcm,
@@ -662,7 +662,7 @@
 					MAX_BUFFER_SIZE, MAX_BUFFER_SIZE);
 
 	dev->data_cb_info =
-		kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS, 
+		kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS,
 					GFP_KERNEL);
 
 	if (!dev->data_cb_info)
@@ -672,14 +672,14 @@
 		dev->data_cb_info[i].dev = dev;
 		dev->data_cb_info[i].index = i;
 	}
-	
+
 	dev->data_urbs_in = alloc_urbs(dev, SNDRV_PCM_STREAM_CAPTURE, &ret);
 	if (ret < 0) {
 		kfree(dev->data_cb_info);
 		free_urbs(dev->data_urbs_in);
 		return ret;
 	}
-	
+
 	dev->data_urbs_out = alloc_urbs(dev, SNDRV_PCM_STREAM_PLAYBACK, &ret);
 	if (ret < 0) {
 		kfree(dev->data_cb_info);
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 515de1c..2240624 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -35,7 +35,7 @@
 #include "input.h"
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.14");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.16");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, RigKontrol3},"
@@ -79,7 +79,7 @@
 	{
 		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE,
 		.idVendor =	USB_VID_NATIVEINSTRUMENTS,
-		.idProduct =	USB_PID_RIGKONTROL2 
+		.idProduct =	USB_PID_RIGKONTROL2
 	},
 	{
 		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE,
@@ -197,7 +197,7 @@
 
 	if (buffer && len > 0)
 		memcpy(dev->ep1_out_buf+1, buffer, len);
-	
+
 	dev->ep1_out_buf[0] = command;
 	return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1),
 			   dev->ep1_out_buf, len+1, &actual_len, 200);
@@ -208,7 +208,7 @@
 {
 	int ret;
 	char tmp[5];
-	
+
 	switch (rate) {
 	case 44100:	tmp[0] = SAMPLERATE_44100;   break;
 	case 48000:	tmp[0] = SAMPLERATE_48000;   break;
@@ -237,12 +237,12 @@
 
 	if (ret)
 		return ret;
-	
-	if (!wait_event_timeout(dev->ep1_wait_queue, 
+
+	if (!wait_event_timeout(dev->ep1_wait_queue,
 	    dev->audio_parm_answer >= 0, HZ))
 		return -EPIPE;
-		
-	if (dev->audio_parm_answer != 1) 
+
+	if (dev->audio_parm_answer != 1)
 		debug("unable to set the device's audio params\n");
 	else
 		dev->bpp = bpp;
@@ -250,8 +250,8 @@
 	return dev->audio_parm_answer == 1 ? 0 : -EINVAL;
 }
 
-int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, 
-				int digital, int analog, int erp)
+int snd_usb_caiaq_set_auto_msg(struct snd_usb_caiaqdev *dev,
+			       int digital, int analog, int erp)
 {
 	char tmp[3] = { digital, analog, erp };
 	return snd_usb_caiaq_send_command(dev, EP1_CMD_AUTO_MSG,
@@ -262,7 +262,7 @@
 {
 	int ret;
 	char val[4];
-	
+
 	/* device-specific startup specials */
 	switch (dev->chip.usb_id) {
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
@@ -314,7 +314,7 @@
 			dev->control_state, 1);
 		break;
 	}
-	
+
 	if (dev->spec.num_analog_audio_out +
 	    dev->spec.num_analog_audio_in +
 	    dev->spec.num_digital_audio_out +
@@ -323,7 +323,7 @@
 		if (ret < 0)
 			log("Unable to set up audio system (ret=%d)\n", ret);
 	}
-	
+
 	if (dev->spec.num_midi_in +
 	    dev->spec.num_midi_out > 0) {
 		ret = snd_usb_caiaq_midi_init(dev);
@@ -363,7 +363,7 @@
 	if (devnum >= SNDRV_CARDS)
 		return -ENODEV;
 
-	err = snd_card_create(index[devnum], id[devnum], THIS_MODULE, 
+	err = snd_card_create(index[devnum], id[devnum], THIS_MODULE,
 			      sizeof(struct snd_usb_caiaqdev), &card);
 	if (err < 0)
 		return err;
@@ -382,11 +382,11 @@
 
 static int __devinit init_card(struct snd_usb_caiaqdev *dev)
 {
-	char *c;
+	char *c, usbpath[32];
 	struct usb_device *usb_dev = dev->chip.dev;
 	struct snd_card *card = dev->chip.card;
 	int err, len;
-	
+
 	if (usb_set_interface(usb_dev, 0, 1) != 0) {
 		log("can't set alt interface.\n");
 		return -EIO;
@@ -395,19 +395,19 @@
 	usb_init_urb(&dev->ep1_in_urb);
 	usb_init_urb(&dev->midi_out_urb);
 
-	usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev, 
+	usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev,
 			  usb_rcvbulkpipe(usb_dev, 0x1),
-			  dev->ep1_in_buf, EP1_BUFSIZE, 
+			  dev->ep1_in_buf, EP1_BUFSIZE,
 			  usb_ep1_command_reply_dispatch, dev);
 
-	usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev, 
+	usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev,
 			  usb_sndbulkpipe(usb_dev, 0x1),
-			  dev->midi_out_buf, EP1_BUFSIZE, 
+			  dev->midi_out_buf, EP1_BUFSIZE,
 			  snd_usb_caiaq_midi_output_done, dev);
-	
+
 	init_waitqueue_head(&dev->ep1_wait_queue);
 	init_waitqueue_head(&dev->prepare_wait_queue);
-	
+
 	if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0)
 		return -EIO;
 
@@ -420,47 +420,52 @@
 
 	usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
 		   dev->vendor_name, CAIAQ_USB_STR_LEN);
-	
+
 	usb_string(usb_dev, usb_dev->descriptor.iProduct,
 		   dev->product_name, CAIAQ_USB_STR_LEN);
-	
-	usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
-		   dev->serial, CAIAQ_USB_STR_LEN);
 
-	/* terminate serial string at first white space occurence */
-	c = strchr(dev->serial, ' ');
-	if (c)
-		*c = '\0';
-	
-	strcpy(card->driver, MODNAME);
-	strcpy(card->shortname, dev->product_name);
+	strlcpy(card->driver, MODNAME, sizeof(card->driver));
+	strlcpy(card->shortname, dev->product_name, sizeof(card->shortname));
+	strlcpy(card->mixername, dev->product_name, sizeof(card->mixername));
 
-	len = snprintf(card->longname, sizeof(card->longname),
-		       "%s %s (serial %s, ",
-		       dev->vendor_name, dev->product_name, dev->serial);
+	/* if the id was not passed as module option, fill it with a shortened
+	 * version of the product string which does not contain any
+	 * whitespaces */
 
-	if (len < sizeof(card->longname) - 2)
-		len += usb_make_path(usb_dev, card->longname + len,
-				     sizeof(card->longname) - len);
+	if (*card->id == '\0') {
+		char id[sizeof(card->id)];
 
-	card->longname[len++] = ')';
-	card->longname[len] = '\0';
+		memset(id, 0, sizeof(id));
+
+		for (c = card->shortname, len = 0;
+			*c && len < sizeof(card->id); c++)
+			if (*c != ' ')
+				id[len++] = *c;
+
+		snd_card_set_id(card, id);
+	}
+
+	usb_make_path(usb_dev, usbpath, sizeof(usbpath));
+	snprintf(card->longname, sizeof(card->longname),
+		       "%s %s (%s)",
+		       dev->vendor_name, dev->product_name, usbpath);
+
 	setup_card(dev);
 	return 0;
 }
 
-static int __devinit snd_probe(struct usb_interface *intf, 
+static int __devinit snd_probe(struct usb_interface *intf,
 		     const struct usb_device_id *id)
 {
 	int ret;
 	struct snd_card *card;
 	struct usb_device *device = interface_to_usbdev(intf);
-	
+
 	ret = create_card(device, &card);
-	
+
 	if (ret < 0)
 		return ret;
-			
+
 	usb_set_intfdata(intf, card);
 	ret = init_card(caiaqdev(card));
 	if (ret < 0) {
@@ -468,7 +473,7 @@
 		snd_card_free(card);
 		return ret;
 	}
-	
+
 	return 0;
 }
 
@@ -489,10 +494,10 @@
 	snd_usb_caiaq_input_free(dev);
 #endif
 	snd_usb_caiaq_audio_free(dev);
-	
+
 	usb_kill_urb(&dev->ep1_in_urb);
 	usb_kill_urb(&dev->midi_out_urb);
-	
+
 	snd_card_free(card);
 	usb_reset_device(interface_to_usbdev(intf));
 }
diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h
index 4cce1ad..ece7351 100644
--- a/sound/usb/caiaq/device.h
+++ b/sound/usb/caiaq/device.h
@@ -81,7 +81,6 @@
 
 	char vendor_name[CAIAQ_USB_STR_LEN];
 	char product_name[CAIAQ_USB_STR_LEN];
-	char serial[CAIAQ_USB_STR_LEN];
 
 	int n_streams, n_audio_in, n_audio_out;
 	int streaming, first_packet, output_running;
diff --git a/sound/usb/caiaq/midi.c b/sound/usb/caiaq/midi.c
index 8fa8cd8..538e8c0 100644
--- a/sound/usb/caiaq/midi.c
+++ b/sound/usb/caiaq/midi.c
@@ -40,7 +40,7 @@
 
 	if (!dev)
 		return;
-	
+
 	dev->midi_receive_substream = up ? substream : NULL;
 }
 
@@ -64,18 +64,18 @@
 				    struct snd_rawmidi_substream *substream)
 {
 	int len, ret;
-	
+
 	dev->midi_out_buf[0] = EP1_CMD_MIDI_WRITE;
 	dev->midi_out_buf[1] = 0; /* port */
 	len = snd_rawmidi_transmit(substream, dev->midi_out_buf + 3,
 				   EP1_BUFSIZE - 3);
-	
+
 	if (len <= 0)
 		return;
-	
+
 	dev->midi_out_buf[2] = len;
 	dev->midi_out_urb.transfer_buffer_length = len+3;
-	
+
 	ret = usb_submit_urb(&dev->midi_out_urb, GFP_ATOMIC);
 	if (ret < 0)
 		log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed,"
@@ -88,7 +88,7 @@
 static void snd_usb_caiaq_midi_output_trigger(struct snd_rawmidi_substream *substream, int up)
 {
 	struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
-	
+
 	if (up) {
 		dev->midi_out_substream = substream;
 		if (!dev->midi_out_active)
@@ -113,12 +113,12 @@
 	.trigger =      snd_usb_caiaq_midi_input_trigger,
 };
 
-void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, 
+void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev,
 				     int port, const char *buf, int len)
 {
 	if (!dev->midi_receive_substream)
 		return;
-	
+
 	snd_rawmidi_receive(dev->midi_receive_substream, buf, len);
 }
 
@@ -142,16 +142,16 @@
 
 	if (device->spec.num_midi_out > 0) {
 		rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT;
-		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, 
+		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
 				    &snd_usb_caiaq_midi_output);
 	}
 
 	if (device->spec.num_midi_in > 0) {
 		rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT;
-		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, 
+		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
 				    &snd_usb_caiaq_midi_input);
 	}
-	
+
 	device->rmidi = rmidi;
 
 	return 0;
@@ -160,7 +160,7 @@
 void snd_usb_caiaq_midi_output_done(struct urb* urb)
 {
 	struct snd_usb_caiaqdev *dev = urb->context;
-	
+
 	dev->midi_out_active = 0;
 	if (urb->status != 0)
 		return;
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index a6b8848..c7b9023 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -627,6 +627,7 @@
 	subs->hwptr_done += offs;
 	if (subs->hwptr_done >= runtime->buffer_size)
 		subs->hwptr_done -= runtime->buffer_size;
+	runtime->delay += offs;
 	spin_unlock_irqrestore(&subs->lock, flags);
 	urb->transfer_buffer_length = offs * stride;
 	if (period_elapsed)
@@ -636,12 +637,22 @@
 
 /*
  * process after playback data complete
- * - nothing to do
+ * - decrease the delay count again
  */
 static int retire_playback_urb(struct snd_usb_substream *subs,
 			       struct snd_pcm_runtime *runtime,
 			       struct urb *urb)
 {
+	unsigned long flags;
+	int stride = runtime->frame_bits >> 3;
+	int processed = urb->transfer_buffer_length / stride;
+
+	spin_lock_irqsave(&subs->lock, flags);
+	if (processed > runtime->delay)
+		runtime->delay = 0;
+	else
+		runtime->delay -= processed;
+	spin_unlock_irqrestore(&subs->lock, flags);
 	return 0;
 }
 
@@ -1520,6 +1531,7 @@
 	subs->hwptr_done = 0;
 	subs->transfer_done = 0;
 	subs->phase = 0;
+	runtime->delay = 0;
 
 	/* clear urbs (to be sure) */
 	deactivate_urbs(subs, 0, 1);
@@ -3279,6 +3291,25 @@
 	return snd_usb_cm106_write_int_reg(dev, 2, 0x8004);
 }
 
+/*
+ * C-Media CM6206 is based on CM106 with two additional
+ * registers that are not documented in the data sheet.
+ * Values here are chosen based on sniffing USB traffic
+ * under Windows.
+ */
+static int snd_usb_cm6206_boot_quirk(struct usb_device *dev)
+{
+	int err, reg;
+	int val[] = {0x200c, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000};
+
+	for (reg = 0; reg < ARRAY_SIZE(val); reg++) {
+		err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]);
+		if (err < 0)
+			return err;
+	}
+
+	return err;
+}
 
 /*
  * Setup quirks
@@ -3565,6 +3596,12 @@
 			goto __err_val;
 	}
 
+	/* C-Media CM6206 / CM106-Like Sound Device */
+	if (id == USB_ID(0x0d8c, 0x0102)) {
+		if (snd_usb_cm6206_boot_quirk(dev) < 0)
+			goto __err_val;
+	}
+
 	/*
 	 * found a config.  now register to ALSA
 	 */
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index 5d955aa..f0f7624 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -1470,6 +1470,41 @@
 	}
 },
 {
+	/* Edirol M-16DX */
+	/* FIXME: This quirk gives a good-working capture stream but the
+	 *        playback seems problematic because of lacking of sync
+	 *        with capture stream.  It needs to sync with the capture
+	 *        clock.  As now, you'll get frequent sound distortions
+	 *        via the playback.
+	 */
+	USB_DEVICE(0x0582, 0x00c4),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_MIDI_FIXED_ENDPOINT,
+				.data = & (const struct snd_usb_midi_endpoint_info) {
+					.out_cables = 0x0001,
+					.in_cables  = 0x0001
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
+{
 	/* BOSS GT-10 */
 	USB_DEVICE(0x0582, 0x00da),
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
@@ -1951,6 +1986,14 @@
 	}
 },
 {
+	USB_DEVICE(0x0ccd, 0x0028),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.vendor_name = "TerraTec",
+		.product_name = "Aureon 5.1 MkII",
+		.ifnum = QUIRK_NO_INTERFACE
+	}
+},
+{
 	USB_DEVICE(0x0ccd, 0x0035),
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
 		.vendor_name = "Miditech",