diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 22d7a54..9277f50 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -886,6 +886,7 @@
 	select GENERIC_CLOCKEVENTS
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
+	select SPARSE_IRQ
 	help
 	  Support for ST-Ericsson's Ux500 architecture
 
@@ -900,6 +901,7 @@
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_STN8815
+	select SPARSE_IRQ
 	help
 	  Support for the Nomadik platform by ST-Ericsson
 
@@ -942,7 +944,7 @@
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
 
-config ARCH_VT8500
+config ARCH_VT8500_SINGLE
 	bool "VIA/WonderMedia 85xx"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
@@ -952,6 +954,8 @@
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
 	select USE_OF
 	help
 	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
@@ -1066,7 +1070,6 @@
 source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-nomadik/Kconfig"
-source "arch/arm/plat-nomadik/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
 
@@ -1127,6 +1130,8 @@
 source "arch/arm/mach-vexpress/Kconfig"
 source "arch/arm/plat-versatile/Kconfig"
 
+source "arch/arm/mach-vt8500/Kconfig"
+
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5f914fc..89087d5 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -201,7 +201,6 @@
 plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
 plat-$(CONFIG_ARCH_ZYNQ)	+= versatile
 plat-$(CONFIG_PLAT_IOP)		+= iop
-plat-$(CONFIG_PLAT_NOMADIK)	+= nomadik
 plat-$(CONFIG_PLAT_ORION)	+= orion
 plat-$(CONFIG_PLAT_PXA)		+= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	+= s3c24xx samsung
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index c744946..706dc57 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -4,7 +4,7 @@
 
 config MACH_NOMADIK_8815NHK
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
-	select HAS_MTU
+	select CLKSRC_NOMADIK_MTU
 	select NOMADIK_8815
 
 endmenu
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index bfa1eab..5ccdf53 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -24,20 +24,17 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/platform_data/clocksource-nomadik-mtu.h>
+#include <linux/platform_data/mtd-nomadik-nand.h>
 #include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
-
-#include <plat/gpio-nomadik.h>
-#include <plat/mtu.h>
-#include <plat/pincfg.h>
-
-#include <linux/platform_data/mtd-nomadik-nand.h>
 #include <mach/fsmc.h>
+#include <mach/irqs.h>
 
 #include "cpu-8815.h"
 
@@ -261,7 +258,7 @@
 	src_cr |= SRC_CR_INIT_VAL;
 	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
 
-	nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE));
+	nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0);
 }
 
 static struct sys_timer nomadik_timer = {
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index b617eae..1273931 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -26,8 +26,8 @@
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/clk-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
-#include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index 6d14454..0c2f662 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -4,8 +4,7 @@
 #include <linux/i2c-algo-bit.h>
 #include <linux/i2c-gpio.h>
 #include <linux/platform_device.h>
-#include <plat/gpio-nomadik.h>
-#include <plat/pincfg.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 /*
  * There are two busses in the 8815NHK.
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
index a118e615..b549d05 100644
--- a/arch/arm/mach-nomadik/include/mach/irqs.h
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -72,7 +72,7 @@
 #define NOMADIK_NR_GPIO			128 /* last 4 not wired to pins */
 #define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + NOMADIK_GPIO_OFFSET)
 #define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - NOMADIK_GPIO_OFFSET)
-#define NR_IRQS				NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+#define NOMADIK_NR_IRQS			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
 
 /* Following two are used by entry_macro.S, to access our dual-vic */
 #define VIC_REG_IRQSR0		0
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index e8c3f0d..5dea906 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -7,8 +7,8 @@
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
 	select CACHE_L2X0
+	select CLKSRC_NOMADIK_MTU
 	select COMMON_CLK
-	select HAS_MTU
 	select PINCTRL
 	select PINCTRL_NOMADIK
 	select PL310_ERRATA_753970 if CACHE_PL310
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 070629a..71a2ca7 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -7,10 +7,8 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-
-#include <plat/gpio-nomadik.h>
-#include <plat/pincfg.h>
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <mach/devices.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index a267c6d..c34d4ef 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -9,10 +9,9 @@
 #include <linux/bug.h>
 #include <linux/string.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <asm/mach-types.h>
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 9c8e4a9..051b62c 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -11,9 +11,9 @@
 #include <linux/amba/mmci.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <asm/mach-types.h>
-#include <plat/ste_dma40.h>
 #include <mach/devices.h>
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 416d436..9268056 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -1,4 +1,3 @@
-
 /*
  * Copyright (C) 2008-2009 ST-Ericsson
  *
@@ -37,14 +36,13 @@
 #include <linux/of_platform.h>
 #include <linux/leds.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
 
-#include <plat/ste_dma40.h>
-#include <plat/gpio-nomadik.h>
-
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index bcdfe6b..8bff078 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -17,15 +17,16 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mfd/abx500/ab8500.h>
+#include <linux/platform_data/usb-musb-ux500.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
-#include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
-#include <linux/platform_data/usb-musb-ux500.h>
 #include <mach/db8500-regs.h>
+#include <mach/irqs.h>
 
 #include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index dfdd4a5..16b5f71 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -11,10 +11,10 @@
 #include <linux/irq.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
-
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 #include "devices-common.h"
 
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 91754a8..318d490 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -12,11 +12,11 @@
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
+#include <mach/irqs.h>
 
 #include "ste-dma40-db8500.h"
 
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 3c8010f..4b24c99 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -8,6 +8,7 @@
 #ifndef __DEVICES_DB8500_H
 #define __DEVICES_DB8500_H
 
+#include <mach/irqs.h>
 #include "devices-common.h"
 
 struct ske_keypad_platform_data;
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index e892854..fc77b42 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -46,6 +46,6 @@
 #include <mach/irqs-board-mop500.h>
 #endif
 
-#define NR_IRQS			IRQ_BOARD_END
+#define UX500_NR_IRQS		IRQ_BOARD_END
 
 #endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h
index 3cc7142..9991aea 100644
--- a/arch/arm/mach-ux500/include/mach/msp.h
+++ b/arch/arm/mach-ux500/include/mach/msp.h
@@ -8,7 +8,7 @@
 #ifndef __MSP_H
 #define __MSP_H
 
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 enum msp_i2s_id {
 	MSP_I2S_0 = 0,
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 6f39731..875309a 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -9,11 +9,10 @@
 #include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/platform_data/clocksource-nomadik-mtu.h>
 
 #include <asm/smp_twd.h>
 
-#include <plat/mtu.h>
-
 #include <mach/setup.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -96,7 +95,7 @@
 	 *
 	 */
 
-	nmdk_timer_init(mtu_timer_base);
+	nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
 	ux500_twd_init();
 }
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 145482e..78ac65f 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -7,10 +7,10 @@
 #include <linux/platform_device.h>
 #include <linux/usb/musb.h>
 #include <linux/dma-mapping.h>
-
-#include <plat/ste_dma40.h>
-#include <mach/hardware.h>
 #include <linux/platform_data/usb-musb-ux500.h>
+#include <linux/platform_data/dma-ste-dma40.h>
+
+#include <mach/hardware.h>
 
 #define MUSB_DMA40_RX_CH { \
 		.mode = STEDMA40_MODE_LOGICAL, \
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
new file mode 100644
index 0000000..2ed0b7d
--- /dev/null
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -0,0 +1,12 @@
+config ARCH_VT8500
+	bool "VIA/WonderMedia 85xx" if ARCH_MULTI_V5
+	default ARCH_VT8500_SINGLE
+	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_CLK
+	help
+	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
index 2b24196..6f2b843 100644
--- a/arch/arm/mach-vt8500/common.h
+++ b/arch/arm/mach-vt8500/common.h
@@ -25,4 +25,7 @@
 /* defined in drivers/clk/clk-vt8500.c */
 void __init vtwm_clk_init(void __iomem *pmc_base);
 
+/* defined in irq.c */
+asmlinkage void vt8500_handle_irq(struct pt_regs *regs);
+
 #endif
diff --git a/arch/arm/mach-vt8500/include/mach/entry-macro.S b/arch/arm/mach-vt8500/include/mach/entry-macro.S
deleted file mode 100644
index 367d1b5..0000000
--- a/arch/arm/mach-vt8500/include/mach/entry-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for VIA VT8500
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-	.macro  get_irqnr_preamble, base, tmp
-	@ physical 0xd8140000 is virtual 0xf8140000
-	mov	\base, #0xf8000000
-	orr	\base, \base, #0x00140000
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqnr, [\base]
-	cmp	\irqnr, #63 @ may be false positive, check interrupt status
-	bne	1001f
-	ldr	\irqstat, [\base, #0x84]
-	ands	\irqstat, #0x80000000
-	moveq	\irqnr, #0
-1001:
-	.endm
-
diff --git a/arch/arm/mach-vt8500/include/mach/irqs.h b/arch/arm/mach-vt8500/include/mach/irqs.h
deleted file mode 100644
index a129fd1..0000000
--- a/arch/arm/mach-vt8500/include/mach/irqs.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/irqs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/* This value is just to make the core happy, never used otherwise */
-#define NR_IRQS 128
diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c
index f8f9ab9..b9cf5ce 100644
--- a/arch/arm/mach-vt8500/irq.c
+++ b/arch/arm/mach-vt8500/irq.c
@@ -36,7 +36,7 @@
 #include <linux/of_address.h>
 
 #include <asm/irq.h>
-
+#include <asm/exception.h>
 
 #define VT8500_ICPC_IRQ		0x20
 #define VT8500_ICPC_FIQ		0x24
@@ -66,30 +66,34 @@
 #define VT8500_EDGE		( VT8500_TRIGGER_RISING \
 				| VT8500_TRIGGER_FALLING)
 
-static int irq_cnt;
+/* vt8500 has 1 intc, wm8505 and wm8650 have 2 */
+#define VT8500_INTC_MAX		2
 
-struct vt8500_irq_priv {
-	void __iomem *base;
+struct vt8500_irq_data {
+	void __iomem 		*base;		/* IO Memory base address */
+	struct irq_domain	*domain;	/* Domain for this controller */
 };
 
+/* Global variable for accessing io-mem addresses */
+static struct vt8500_irq_data intc[VT8500_INTC_MAX];
+static u32 active_cnt = 0;
+
 static void vt8500_irq_mask(struct irq_data *d)
 {
-	struct vt8500_irq_priv *priv =
-			(struct vt8500_irq_priv *)(d->domain->host_data);
+	struct vt8500_irq_data *priv = d->domain->host_data;
 	void __iomem *base = priv->base;
-	u8 edge;
+	void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4);
+	u8 edge, dctr;
+	u32 status;
 
 	edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE;
 	if (edge) {
-		void __iomem *stat_reg = base + VT8500_ICIS
-						+ (d->hwirq < 32 ? 0 : 4);
-		unsigned status = readl(stat_reg);
+		status = readl(stat_reg);
 
 		status |= (1 << (d->hwirq & 0x1f));
 		writel(status, stat_reg);
 	} else {
-		u8 dctr = readb(base + VT8500_ICDC + d->hwirq);
-
+		dctr = readb(base + VT8500_ICDC + d->hwirq);
 		dctr &= ~VT8500_INT_ENABLE;
 		writeb(dctr, base + VT8500_ICDC + d->hwirq);
 	}
@@ -97,8 +101,7 @@
 
 static void vt8500_irq_unmask(struct irq_data *d)
 {
-	struct vt8500_irq_priv *priv =
-			(struct vt8500_irq_priv *)(d->domain->host_data);
+	struct vt8500_irq_data *priv = d->domain->host_data;
 	void __iomem *base = priv->base;
 	u8 dctr;
 
@@ -109,8 +112,7 @@
 
 static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
 {
-	struct vt8500_irq_priv *priv =
-			(struct vt8500_irq_priv *)(d->domain->host_data);
+	struct vt8500_irq_data *priv = d->domain->host_data;
 	void __iomem *base = priv->base;
 	u8 dctr;
 
@@ -148,17 +150,15 @@
 
 static void __init vt8500_init_irq_hw(void __iomem *base)
 {
-	unsigned int i;
+	u32 i;
 
 	/* Enable rotating priority for IRQ */
 	writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ);
 	writel(0x00, base + VT8500_ICPC_FIQ);
 
-	for (i = 0; i < 64; i++) {
-		/* Disable all interrupts and route them to IRQ */
-		writeb(VT8500_INT_DISABLE | ICDC_IRQ,
-						base + VT8500_ICDC + i);
-	}
+	/* Disable all interrupts and route them to IRQ */
+	for (i = 0; i < 64; i++)
+		writeb(VT8500_INT_DISABLE | ICDC_IRQ, base + VT8500_ICDC + i);
 }
 
 static int vt8500_irq_map(struct irq_domain *h, unsigned int virq,
@@ -175,33 +175,67 @@
 	.xlate = irq_domain_xlate_onecell,
 };
 
+asmlinkage void __exception_irq_entry vt8500_handle_irq(struct pt_regs *regs)
+{
+	u32 stat, i;
+	int irqnr, virq;
+	void __iomem *base;
+
+	/* Loop through each active controller */
+	for (i=0; i<active_cnt; i++) {
+		base = intc[i].base;
+		irqnr = readl_relaxed(base) & 0x3F;
+		/*
+		  Highest Priority register default = 63, so check that this
+		  is a real interrupt by checking the status register
+		*/
+		if (irqnr == 63) {
+			stat = readl_relaxed(base + VT8500_ICIS + 4);
+			if (!(stat & BIT(31)))
+				continue;
+		}
+
+		virq = irq_find_mapping(intc[i].domain, irqnr);
+		handle_IRQ(virq, regs);
+	}
+}
+
 int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
 {
-	struct irq_domain *vt8500_irq_domain;
-	struct vt8500_irq_priv *priv;
 	int irq, i;
 	struct device_node *np = node;
 
-	priv = kzalloc(sizeof(struct vt8500_irq_priv), GFP_KERNEL);
-	priv->base = of_iomap(np, 0);
+	if (active_cnt == VT8500_INTC_MAX) {
+		pr_err("%s: Interrupt controllers > VT8500_INTC_MAX\n",
+								__func__);
+		goto out;
+	}
 
-	vt8500_irq_domain = irq_domain_add_legacy(node, 64, irq_cnt, 0,
-				&vt8500_irq_domain_ops, priv);
-	if (!vt8500_irq_domain)
-		pr_err("%s: Unable to add wmt irq domain!\n", __func__);
+	intc[active_cnt].base = of_iomap(np, 0);
+	intc[active_cnt].domain = irq_domain_add_linear(node, 64,
+			&vt8500_irq_domain_ops,	&intc[active_cnt]);
 
-	irq_set_default_host(vt8500_irq_domain);
+	if (!intc[active_cnt].base) {
+		pr_err("%s: Unable to map IO memory\n", __func__);
+		goto out;
+	}
 
-	vt8500_init_irq_hw(priv->base);
+	if (!intc[active_cnt].domain) {
+		pr_err("%s: Unable to add irq domain!\n", __func__);
+		goto out;
+	}
 
-	pr_info("Added IRQ Controller @ %x [virq_base = %d]\n",
-						(u32)(priv->base), irq_cnt);
+	vt8500_init_irq_hw(intc[active_cnt].base);
+
+	pr_info("vt8500-irq: Added interrupt controller\n");
+
+	active_cnt++;
 
 	/* check if this is a slaved controller */
 	if (of_irq_count(np) != 0) {
 		/* check that we have the correct number of interrupts */
 		if (of_irq_count(np) != 8) {
-			pr_err("%s: Incorrect IRQ map for slave controller\n",
+			pr_err("%s: Incorrect IRQ map for slaved controller\n",
 					__func__);
 			return -EINVAL;
 		}
@@ -213,9 +247,7 @@
 
 		pr_info("vt8500-irq: Enabled slave->parent interrupts\n");
 	}
-
-	irq_cnt += 64;
-
+out:
 	return 0;
 }
 
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 8d3871f..14def0f 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -194,5 +194,6 @@
 	.timer		= &vt8500_timer,
 	.init_machine	= vt8500_init,
 	.restart	= vt8500_restart,
+	.handle_irq	= vt8500_handle_irq,
 MACHINE_END
 
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
deleted file mode 100644
index 19f55ca..0000000
--- a/arch/arm/plat-nomadik/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-# We keep common IP's here for Nomadik and other similar
-# familiy of processors from ST-Ericsson. At the moment we have
-# just MTU, others to follow soon.
-
-config PLAT_NOMADIK
-	bool
-	depends on ARCH_NOMADIK || ARCH_U8500
-	default y
-	select CLKSRC_MMIO
-	help
-	  Common platform code for Nomadik and other ST-Ericsson
-	  platforms.
-
-if PLAT_NOMADIK
-
-config HAS_MTU
-	bool
-	help
-	  Support for Multi Timer Unit. MTU provides access
-	  to multiple interrupt generating programmable
-	  32-bit free running decrementing counters.
-
-config NOMADIK_MTU_SCHED_CLOCK
-	bool
-	depends on HAS_MTU
-	help
-	  Use the Multi Timer Unit as the sched_clock.
-
-endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
deleted file mode 100644
index 37c7cdd..0000000
--- a/arch/arm/plat-nomadik/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# arch/arm/plat-nomadik/Makefile
-# Copyright 2009 ST-Ericsson
-# Licensed under GPLv2
-
-obj-$(CONFIG_HAS_MTU)	+= timer.o
diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
deleted file mode 100644
index c08a54d..0000000
--- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_NOMADIK_GPIO
-#define __PLAT_NOMADIK_GPIO
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT	0x00
-#define NMK_GPIO_DATS	0x04
-#define NMK_GPIO_DATC	0x08
-#define NMK_GPIO_PDIS	0x0c
-#define NMK_GPIO_DIR	0x10
-#define NMK_GPIO_DIRS	0x14
-#define NMK_GPIO_DIRC	0x18
-#define NMK_GPIO_SLPC	0x1c
-#define NMK_GPIO_AFSLA	0x20
-#define NMK_GPIO_AFSLB	0x24
-#define NMK_GPIO_LOWEMI	0x28
-
-#define NMK_GPIO_RIMSC	0x40
-#define NMK_GPIO_FIMSC	0x44
-#define NMK_GPIO_IS	0x48
-#define NMK_GPIO_IC	0x4c
-#define NMK_GPIO_RWIMSC	0x50
-#define NMK_GPIO_FWIMSC	0x54
-#define NMK_GPIO_WKS	0x58
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO	0
-#define NMK_GPIO_ALT_A	1
-#define NMK_GPIO_ALT_B	2
-#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-#define NMK_GPIO_ALT_CX_SHIFT 2
-#define NMK_GPIO_ALT_C1	((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C2	((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C3	((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C4	((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-
-/* Pull up/down values */
-enum nmk_gpio_pull {
-	NMK_GPIO_PULL_NONE,
-	NMK_GPIO_PULL_UP,
-	NMK_GPIO_PULL_DOWN,
-};
-
-/* Sleep mode */
-enum nmk_gpio_slpm {
-	NMK_GPIO_SLPM_INPUT,
-	NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
-	NMK_GPIO_SLPM_NOCHANGE,
-	NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
-};
-
-extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
-extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
-#ifdef CONFIG_PINCTRL_NOMADIK
-extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
-#else
-static inline int nmk_gpio_set_mode(int gpio, int gpio_mode)
-{
-	return -ENODEV;
-}
-#endif
-extern int nmk_gpio_get_mode(int gpio);
-
-extern void nmk_gpio_wakeups_suspend(void);
-extern void nmk_gpio_wakeups_resume(void);
-
-extern void nmk_gpio_clocks_enable(void);
-extern void nmk_gpio_clocks_disable(void);
-
-extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
-	char *name;
-	int first_gpio;
-	int first_irq;
-	int num_gpio;
-	u32 (*get_secondary_status)(unsigned int bank);
-	void (*set_ioforce)(bool enable);
-	bool supports_sleepmode;
-};
-
-#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index fbd9b2b..5bc09ee 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -216,7 +216,7 @@
 
 config HW_RANDOM_NOMADIK
 	tristate "ST-Ericsson Nomadik Random Number Generator support"
-	depends on HW_RANDOM && PLAT_NOMADIK
+	depends on HW_RANDOM && ARCH_NOMADIK
 	---help---
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on ST-Ericsson SoCs (8815 and 8500).
diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
index ca4a25e..1f6bfb8 100644
--- a/drivers/clk/ux500/u8500_clk.c
+++ b/drivers/clk/ux500/u8500_clk.c
@@ -12,7 +12,7 @@
 #include <linux/clk-provider.h>
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/platform_data/clk-ux500.h>
-
+#include <mach/db8500-regs.h>
 #include "clk.h"
 
 void u8500_clk_init(void)
@@ -160,12 +160,6 @@
 	clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT);
 	clk_register_clkdev(clk, NULL, "uicc");
 
-	/*
-	 * FIXME: The MTU clocks might need some kind of "parent muxed join"
-	 * and these have no K-clocks. For now, we ignore the missing
-	 * connection to the corresponding P-clocks, p6_mtu0_clk and
-	 * p6_mtu1_clk. Instead timclk is used which is the valid parent.
-	 */
 	clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT);
 	clk_register_clkdev(clk, NULL, "mtu0");
 	clk_register_clkdev(clk, NULL, "mtu1");
@@ -379,8 +373,11 @@
 
 	clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", U8500_CLKRST6_BASE,
 				BIT(6), 0);
+	clk_register_clkdev(clk, "apb_pclk", "mtu0");
+
 	clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", U8500_CLKRST6_BASE,
 				BIT(7), 0);
+	clk_register_clkdev(clk, "apb_pclk", "mtu1");
 
 	/* PRCC K-clocks
 	 *
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 6a78073..c9f67de 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -22,6 +22,21 @@
 config ARMADA_370_XP_TIMER
 	bool
 
+config CLKSRC_NOMADIK_MTU
+	bool
+	depends on (ARCH_NOMADIK || ARCH_U8500)
+	select CLKSRC_MMIO
+	help
+	  Support for Multi Timer Unit. MTU provides access
+	  to multiple interrupt generating programmable
+	  32-bit free running decrementing counters.
+
+config CLKSRC_NOMADIK_MTU_SCHED_CLOCK
+	bool
+	depends on CLKSRC_NOMADIK_MTU
+	help
+	  Use the Multi Timer Unit as the sched_clock.
+
 config CLKSRC_DBX500_PRCMU
 	bool "Clocksource PRCMU Timer"
 	depends on UX500_SOC_DB8500
@@ -31,7 +46,7 @@
 
 config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
 	bool "Clocksource PRCMU Timer sched_clock"
-	depends on (CLKSRC_DBX500_PRCMU && !NOMADIK_MTU_SCHED_CLOCK)
+	depends on (CLKSRC_DBX500_PRCMU && !CLKSRC_NOMADIK_MTU_SCHED_CLOCK)
 	default y
 	help
 	  Use the always on PRCMU Timer as sched_clock
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 603be36..24fb888 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -11,6 +11,7 @@
 obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
 obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
 obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
+obj-$(CONFIG_CLKSRC_NOMADIK_MTU)	+= nomadik-mtu.o
 obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
 obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
 obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
diff --git a/arch/arm/plat-nomadik/timer.c b/drivers/clocksource/nomadik-mtu.c
similarity index 92%
rename from arch/arm/plat-nomadik/timer.c
rename to drivers/clocksource/nomadik-mtu.c
index 9222e55..8914c3c 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/plat-nomadik/timer.c
- *
  * Copyright (C) 2008 STMicroelectronics
  * Copyright (C) 2010 Alessandro Rubini
  * Copyright (C) 2010 Linus Walleij for ST-Ericsson
@@ -14,9 +12,11 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/clockchips.h>
+#include <linux/clocksource.h>
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/err.h>
+#include <linux/platform_data/clocksource-nomadik-mtu.h>
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
 
@@ -174,12 +174,18 @@
 	       mtu_base + MTU_CR(0));
 }
 
-void __init nmdk_timer_init(void __iomem *base)
+void __init nmdk_timer_init(void __iomem *base, int irq)
 {
 	unsigned long rate;
-	struct clk *clk0;
+	struct clk *clk0, *pclk0;
 
 	mtu_base = base;
+
+	pclk0 = clk_get_sys("mtu0", "apb_pclk");
+	BUG_ON(IS_ERR(pclk0));
+	BUG_ON(clk_prepare(pclk0) < 0);
+	BUG_ON(clk_enable(pclk0) < 0);
+
 	clk0 = clk_get_sys("mtu0", NULL);
 	BUG_ON(IS_ERR(clk0));
 	BUG_ON(clk_prepare(clk0) < 0);
@@ -201,7 +207,8 @@
 		clk_prescale = MTU_CRn_PRESCALE_1;
 	}
 
-	nmdk_cycle = (rate + HZ/2) / HZ;
+	/* Cycles for periodic mode */
+	nmdk_cycle = DIV_ROUND_CLOSEST(rate, HZ);
 
 
 	/* Timer 0 is the free running clocksource */
@@ -217,7 +224,7 @@
 #endif
 
 	/* Timer 1 is used for events, register irq and clockevents */
-	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
+	setup_irq(irq, &nmdk_timer_irq);
 	nmdk_clkevt.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
 }
diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c
index bc615cc..8bc5fef 100644
--- a/drivers/crypto/ux500/cryp/cryp_core.c
+++ b/drivers/crypto/ux500/cryp/cryp_core.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/semaphore.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <crypto/aes.h>
 #include <crypto/algapi.h>
@@ -30,8 +31,6 @@
 #include <crypto/des.h>
 #include <crypto/scatterwalk.h>
 
-#include <plat/ste_dma40.h>
-
 #include <linux/platform_data/crypto-ux500.h>
 #include <mach/hardware.h>
 
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index ae55091..23c5573 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -19,8 +19,7 @@
 #include <linux/err.h>
 #include <linux/amba/bus.h>
 #include <linux/regulator/consumer.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include "dmaengine.h"
 #include "ste_dma40_ll.h"
diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
index cad9e1d..851ad56 100644
--- a/drivers/dma/ste_dma40_ll.c
+++ b/drivers/dma/ste_dma40_ll.c
@@ -6,7 +6,7 @@
  */
 
 #include <linux/kernel.h>
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include "ste_dma40_ll.h"
 
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index de08740..77629d3 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -409,7 +409,7 @@
 
 config KEYBOARD_NOMADIK
 	tristate "ST-Ericsson Nomadik SKE keyboard"
-	depends on PLAT_NOMADIK
+	depends on (ARCH_NOMADIK || ARCH_U8500)
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use a keypad provided on the SKE controller
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 1667c77..547fff4 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -565,15 +565,10 @@
 	else
 		num_irqs = AB8500_NR_IRQS;
 
-	if (ab8500->irq_base) {
-		ab8500->domain = irq_domain_add_legacy(
-			NULL, num_irqs, ab8500->irq_base,
-			0, &ab8500_irq_ops, ab8500);
-	}
-	else {
-		ab8500->domain = irq_domain_add_linear(
-			np, num_irqs, &ab8500_irq_ops, ab8500);
-	}
+	/* If ->irq_base is zero this will give a linear mapping */
+	ab8500->domain = irq_domain_add_simple(NULL,
+			num_irqs, ab8500->irq_base,
+			&ab8500_irq_ops, ab8500);
 
 	if (!ab8500->domain) {
 		dev_err(ab8500->dev, "Failed to create irqdomain\n");
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 00b8b0f..cea29ba 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -2697,9 +2697,15 @@
 
 static int db8500_irq_init(struct device_node *np)
 {
-	db8500_irq_domain = irq_domain_add_legacy(
-		np, NUM_PRCMU_WAKEUPS, IRQ_PRCMU_BASE,
-		0, &db8500_irq_ops, NULL);
+	int irq_base = -1;
+
+	/* In the device tree case, just take some IRQs */
+	if (!np)
+		irq_base = IRQ_PRCMU_BASE;
+
+	db8500_irq_domain = irq_domain_add_simple(
+		np, NUM_PRCMU_WAKEUPS, irq_base,
+		&db8500_irq_ops, NULL);
 
 	if (!db8500_irq_domain) {
 		pr_err("Failed to create irqdomain\n");
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 4883139..e4f5748 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -559,7 +559,7 @@
 
 config MTD_NAND_FSMC
 	tristate "Support for NAND on ST Micros FSMC"
-	depends on PLAT_SPEAR || PLAT_NOMADIK || MACH_U300
+	depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
 	help
 	  Enables support for NAND Flash chips on the ST Microelectronics
 	  Flexible Static Memory Controller (FSMC)
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index cf82d9c..3ad23fb 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -44,12 +44,9 @@
 static inline void prcmu_write(unsigned int reg, u32 value) {}
 static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
 #endif
-
+#include <linux/platform_data/pinctrl-nomadik.h>
 #include <asm/mach/irq.h>
-
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
-
+#include <mach/irqs.h>
 #include "pinctrl-nomadik.h"
 
 /*
@@ -60,8 +57,6 @@
  * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
  */
 
-#define NMK_GPIO_PER_CHIP	32
-
 struct nmk_gpio_chip {
 	struct gpio_chip chip;
 	struct irq_domain *domain;
@@ -536,7 +531,7 @@
  * and its sleep mode based on the specified configuration.  The @cfg is
  * usually one of the SoC specific macros defined in mach/<soc>-pins.h.  These
  * are constructed using, and can be further enhanced with, the macros in
- * plat/pincfg.h.
+ * <linux/platform_data/pinctrl-nomadik.h>
  *
  * If a pin's mode is set to GPIO, it is configured as an input to avoid
  * side-effects.  The gpio can be manipulated later using standard GPIO API
diff --git a/drivers/pinctrl/pinctrl-nomadik.h b/drivers/pinctrl/pinctrl-nomadik.h
index eef316e..bcd4191 100644
--- a/drivers/pinctrl/pinctrl-nomadik.h
+++ b/drivers/pinctrl/pinctrl-nomadik.h
@@ -1,7 +1,7 @@
 #ifndef PINCTRL_PINCTRL_NOMADIK_H
 #define PINCTRL_PINCTRL_NOMADIK_H
 
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 /* Package definitions */
 #define PINCTRL_NMK_STN8815	0
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/include/linux/platform_data/clocksource-nomadik-mtu.h
similarity index 71%
rename from arch/arm/plat-nomadik/include/plat/mtu.h
rename to include/linux/platform_data/clocksource-nomadik-mtu.h
index 582641f..8008897 100644
--- a/arch/arm/plat-nomadik/include/plat/mtu.h
+++ b/include/linux/platform_data/clocksource-nomadik-mtu.h
@@ -1,7 +1,7 @@
 #ifndef __PLAT_MTU_H
 #define __PLAT_MTU_H
 
-void nmdk_timer_init(void __iomem *base);
+void nmdk_timer_init(void __iomem *base, int irq);
 void nmdk_clkevt_reset(void);
 void nmdk_clksrc_reset(void);
 
diff --git a/include/linux/platform_data/crypto-ux500.h b/include/linux/platform_data/crypto-ux500.h
index 5b2d081..94df96d 100644
--- a/include/linux/platform_data/crypto-ux500.h
+++ b/include/linux/platform_data/crypto-ux500.h
@@ -7,7 +7,7 @@
 #ifndef _CRYPTO_UX500_H
 #define _CRYPTO_UX500_H
 #include <linux/dmaengine.h>
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 struct hash_platform_data {
 	void *mem_to_engine;
diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/include/linux/platform_data/dma-ste-dma40.h
similarity index 100%
rename from arch/arm/plat-nomadik/include/plat/ste_dma40.h
rename to include/linux/platform_data/dma-ste-dma40.h
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/include/linux/platform_data/pinctrl-nomadik.h
similarity index 65%
rename from arch/arm/plat-nomadik/include/plat/pincfg.h
rename to include/linux/platform_data/pinctrl-nomadik.h
index 3b8ec60..f73b2f0 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/include/linux/platform_data/pinctrl-nomadik.h
@@ -1,16 +1,17 @@
 /*
- * Copyright (C) ST-Ericsson SA 2010
+ * Structures and registers for GPIO access in the Nomadik SoC
  *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * Copyright (C) 2008 STMicroelectronics
+ *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
  *
- * Based on arch/arm/mach-pxa/include/mach/mfp.h:
- *   Copyright (C) 2007 Marvell International Ltd.
- *   eric miao <eric.miao@marvell.com>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  */
 
-#ifndef __PLAT_PINCFG_H
-#define __PLAT_PINCFG_H
+#ifndef __PLAT_NOMADIK_GPIO
+#define __PLAT_NOMADIK_GPIO
 
 /*
  * pin configurations are represented by 32-bit integers:
@@ -166,8 +167,100 @@
 	(PIN_CFG_DEFAULT |\
 	 (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
 
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+#define GPIO_BLOCK_SHIFT 5
+#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT)
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT	0x00
+#define NMK_GPIO_DATS	0x04
+#define NMK_GPIO_DATC	0x08
+#define NMK_GPIO_PDIS	0x0c
+#define NMK_GPIO_DIR	0x10
+#define NMK_GPIO_DIRS	0x14
+#define NMK_GPIO_DIRC	0x18
+#define NMK_GPIO_SLPC	0x1c
+#define NMK_GPIO_AFSLA	0x20
+#define NMK_GPIO_AFSLB	0x24
+#define NMK_GPIO_LOWEMI	0x28
+
+#define NMK_GPIO_RIMSC	0x40
+#define NMK_GPIO_FIMSC	0x44
+#define NMK_GPIO_IS	0x48
+#define NMK_GPIO_IC	0x4c
+#define NMK_GPIO_RWIMSC	0x50
+#define NMK_GPIO_FWIMSC	0x54
+#define NMK_GPIO_WKS	0x58
+/* These appear in DB8540 and later ASICs */
+#define NMK_GPIO_EDGELEVEL 0x5C
+#define NMK_GPIO_LEVEL	0x60
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO	0
+#define NMK_GPIO_ALT_A	1
+#define NMK_GPIO_ALT_B	2
+#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+#define NMK_GPIO_ALT_CX_SHIFT 2
+#define NMK_GPIO_ALT_C1	((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C2	((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C3	((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C4	((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+
+/* Pull up/down values */
+enum nmk_gpio_pull {
+	NMK_GPIO_PULL_NONE,
+	NMK_GPIO_PULL_UP,
+	NMK_GPIO_PULL_DOWN,
+};
+
+/* Sleep mode */
+enum nmk_gpio_slpm {
+	NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_NOCHANGE,
+	NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
+};
+
+/* Older deprecated pin config API that should go away soon */
 extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
 extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
 extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
-
+extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
+extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
+#ifdef CONFIG_PINCTRL_NOMADIK
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+#else
+static inline int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+	return -ENODEV;
+}
 #endif
+extern int nmk_gpio_get_mode(int gpio);
+
+extern void nmk_gpio_wakeups_suspend(void);
+extern void nmk_gpio_wakeups_resume(void);
+
+extern void nmk_gpio_clocks_enable(void);
+extern void nmk_gpio_clocks_disable(void);
+
+extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+	char *name;
+	int first_gpio;
+	int first_irq;
+	int num_gpio;
+	u32 (*get_secondary_status)(unsigned int bank);
+	void (*set_ioforce)(bool enable);
+	bool supports_sleepmode;
+};
+
+#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/sound/soc/ux500/ux500_pcm.c b/sound/soc/ux500/ux500_pcm.c
index 1a04e24..b55b79f 100644
--- a/sound/soc/ux500/ux500_pcm.c
+++ b/sound/soc/ux500/ux500_pcm.c
@@ -18,8 +18,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/slab.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>