at86rf230: add irq type configuration option
Add option to at86rf230 platform data to configure the type of the
interrupt used by the driver. The irq polarity of the device will
be configured accordingly.
Signed-off-by: Sascha Herrmann <sascha@ps.nvbi.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index fc315dd..cf09888 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -219,6 +219,9 @@
#define IRQ_PLL_UNL (1 << 1)
#define IRQ_PLL_LOCK (1 << 0)
+#define IRQ_ACTIVE_HIGH 0
+#define IRQ_ACTIVE_LOW 1
+
#define STATE_P_ON 0x00 /* BUSY */
#define STATE_BUSY_RX 0x01
#define STATE_BUSY_TX 0x02
@@ -726,11 +729,16 @@
return IRQ_HANDLED;
}
+static int at86rf230_irq_polarity(struct at86rf230_local *lp, int pol)
+{
+ return at86rf230_write_subreg(lp, SR_IRQ_POLARITY, pol);
+}
static int at86rf230_hw_init(struct at86rf230_local *lp)
{
+ struct at86rf230_platform_data *pdata = lp->spi->dev.platform_data;
+ int rc, irq_pol;
u8 status;
- int rc;
rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
if (rc)
@@ -748,6 +756,16 @@
dev_info(&lp->spi->dev, "Status: %02x\n", status);
}
+ /* configure irq polarity, defaults to high active */
+ if (pdata->irq_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
+ irq_pol = IRQ_ACTIVE_LOW;
+ else
+ irq_pol = IRQ_ACTIVE_HIGH;
+
+ rc = at86rf230_irq_polarity(lp, irq_pol);
+ if (rc)
+ return rc;
+
rc = at86rf230_write_subreg(lp, SR_IRQ_MASK, 0xff); /* IRQ_TRX_UR |
* IRQ_CCA_ED |
* IRQ_TRX_END |
@@ -798,37 +816,36 @@
return 0;
}
-static int at86rf230_fill_data(struct spi_device *spi)
+static void at86rf230_fill_data(struct spi_device *spi)
{
struct at86rf230_local *lp = spi_get_drvdata(spi);
struct at86rf230_platform_data *pdata = spi->dev.platform_data;
- if (!pdata) {
- dev_err(&spi->dev, "no platform_data\n");
- return -EINVAL;
- }
-
lp->rstn = pdata->rstn;
lp->slp_tr = pdata->slp_tr;
lp->dig2 = pdata->dig2;
-
- return 0;
}
static int at86rf230_probe(struct spi_device *spi)
{
+ struct at86rf230_platform_data *pdata;
struct ieee802154_dev *dev;
struct at86rf230_local *lp;
u8 man_id_0, man_id_1;
- int rc;
+ int rc, supported = 0;
const char *chip;
- int supported = 0;
if (!spi->irq) {
dev_err(&spi->dev, "no IRQ specified\n");
return -EINVAL;
}
+ pdata = spi->dev.platform_data;
+ if (!pdata) {
+ dev_err(&spi->dev, "no platform_data\n");
+ return -EINVAL;
+ }
+
dev = ieee802154_alloc_device(sizeof(*lp), &at86rf230_ops);
if (!dev)
return -ENOMEM;
@@ -851,9 +868,7 @@
spi_set_drvdata(spi, lp);
- rc = at86rf230_fill_data(spi);
- if (rc)
- goto err_fill;
+ at86rf230_fill_data(spi);
rc = gpio_request(lp->rstn, "rstn");
if (rc)
@@ -928,7 +943,8 @@
if (rc)
goto err_gpio_dir;
- rc = request_irq(spi->irq, at86rf230_isr, IRQF_SHARED,
+ rc = request_irq(spi->irq, at86rf230_isr,
+ IRQF_SHARED | pdata->irq_type,
dev_name(&spi->dev), lp);
if (rc)
goto err_gpio_dir;
@@ -948,7 +964,6 @@
err_slp_tr:
gpio_free(lp->rstn);
err_rstn:
-err_fill:
spi_set_drvdata(spi, NULL);
mutex_destroy(&lp->bmux);
ieee802154_free_device(lp->dev);
diff --git a/include/linux/spi/at86rf230.h b/include/linux/spi/at86rf230.h
index b2b1afb..aa327a8 100644
--- a/include/linux/spi/at86rf230.h
+++ b/include/linux/spi/at86rf230.h
@@ -26,6 +26,20 @@
int rstn;
int slp_tr;
int dig2;
+
+ /* Setting the irq_type will configure the driver to request
+ * the platform irq trigger type according to the given value
+ * and configure the interrupt polarity of the device to the
+ * corresponding polarity.
+ *
+ * Allowed values are: IRQF_TRIGGER_RISING, IRQF_TRIGGER_FALLING,
+ * IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW
+ *
+ * Setting it to 0, the driver does not touch the trigger type
+ * configuration of the interrupt and sets the interrupt polarity
+ * of the device to high active (the default value).
+ */
+ int irq_type;
};
#endif