diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 2204762..b6c5d37 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -72,6 +72,11 @@
 module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
 MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
 
+static int modparam_fastchanswitch;
+module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO);
+MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios.");
+
+
 /* Module info */
 MODULE_AUTHOR("Jiri Slaby");
 MODULE_AUTHOR("Nick Kossifidis");
@@ -2686,6 +2691,7 @@
 	struct ath5k_hw *ah = sc->ah;
 	struct ath_common *common = ath5k_hw_common(ah);
 	int ret, ani_mode;
+	bool fast;
 
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
 
@@ -2705,7 +2711,10 @@
 	ath5k_drain_tx_buffs(sc);
 	if (chan)
 		sc->curchan = chan;
-	ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL,
+
+	fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0;
+
+	ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast,
 								skip_pcu);
 	if (ret) {
 		ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 3510de2..126a4ea 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -1124,8 +1124,11 @@
 			/* Non fatal, can happen eg.
 			 * on mode change */
 			ret = 0;
-		} else
+		} else {
+			ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET,
+				"fast chan change successful\n");
 			return 0;
+		}
 	}
 
 	/*
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 0ca7635..ff8150e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4645,10 +4645,16 @@
 	case 1:
 		break;
 	case 2:
-		scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	case 3:
-		scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
index 7856f0d..343fc9f 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -524,10 +524,16 @@
 	case 1:
 		break;
 	case 2:
-		scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	case 3:
-		scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	}
 	scaledPower = max((u16)0, scaledPower);
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c
index 79e7ce6..3a022bc 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965.c
@@ -1235,7 +1235,7 @@
 
 		memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
 		iwl_legacy_print_rx_config_cmd(priv, ctx);
-		return 0;
+		goto set_tx_power;
 	}
 
 	/* If we are currently associated and the new config requires
@@ -1315,6 +1315,7 @@
 
 	iwl4965_init_sensitivity(priv);
 
+set_tx_power:
 	/* If we issue a new RXON command which required a tune then we must
 	 * send a new TXPOWER command or we won't be able to Tx any frames */
 	ret = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true);
@@ -1541,7 +1542,7 @@
 	s32 temp;
 
 	temp = iwl4965_hw_get_temperature(priv);
-	if (temp < 0)
+	if (IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp))
 		return;
 
 	if (priv->temperature != temp) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c
index a37c41b..5484ab7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-2000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-2000.c
@@ -177,79 +177,6 @@
 	return 0;
 }
 
-static int iwl2030_hw_channel_switch(struct iwl_priv *priv,
-                                    struct ieee80211_channel_switch *ch_switch)
-{
-	/*
-	 * MULTI-FIXME
-	 * See iwl_mac_channel_switch.
-	 */
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	struct iwl6000_channel_switch_cmd cmd;
-	const struct iwl_channel_info *ch_info;
-	u32 switch_time_in_usec, ucode_switch_time;
-	u16 ch;
-	u32 tsf_low;
-	u8 switch_count;
-	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
-	struct ieee80211_vif *vif = ctx->vif;
-	struct iwl_host_cmd hcmd = {
-		.id = REPLY_CHANNEL_SWITCH,
-		.len = { sizeof(cmd), },
-		.flags = CMD_SYNC,
-		.data = { &cmd, },
-	};
-
-	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
-	ch = ch_switch->channel->hw_value;
-	IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
-		ctx->active.channel, ch);
-	cmd.channel = cpu_to_le16(ch);
-	cmd.rxon_flags = ctx->staging.flags;
-	cmd.rxon_filter_flags = ctx->staging.filter_flags;
-	switch_count = ch_switch->count;
-	tsf_low = ch_switch->timestamp & 0x0ffffffff;
-	/*
-	 * calculate the ucode channel switch time
-	 * adding TSF as one of the factor for when to switch
-	 */
-	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
-		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
-		    beacon_interval)) {
-			switch_count -= (priv->ucode_beacon_time -
-				tsf_low) / beacon_interval;
-		} else
-			switch_count = 0;
-	}
-	if (switch_count <= 1)
-		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
-	else {
-		switch_time_in_usec =
-			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
-		ucode_switch_time = iwl_usecs_to_beacons(priv,
-						switch_time_in_usec,
-						beacon_interval);
-		cmd.switch_time = iwl_add_beacon_time(priv,
-						priv->ucode_beacon_time,
-						ucode_switch_time,
-						beacon_interval);
-	}
-	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
-		      cmd.switch_time);
-	ch_info = iwl_get_channel_info(priv, priv->band, ch);
-	if (ch_info)
-		cmd.expect_beacon = is_channel_radar(ch_info);
-	else {
-		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
-			ctx->active.channel, ch);
-		return -EFAULT;
-	}
-	priv->switch_rxon.channel = cmd.channel;
-	priv->switch_rxon.switch_in_progress = true;
-
-	return iwl_send_cmd_sync(priv, &hcmd);
-}
-
 static struct iwl_lib_ops iwl2000_lib = {
 	.set_hw_params = iwl2000_hw_set_hw_params,
 	.rx_handler_setup = iwlagn_rx_handler_setup,
@@ -257,7 +184,6 @@
 	.cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
 	.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
 	.update_chain_flags = iwl_update_chain_flags,
-	.set_channel_switch = iwl2030_hw_channel_switch,
 	.apm_ops = {
 		.init = iwl_apm_init,
 		.config = iwl2000_nic_config,
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index a8dbbd0..4353a65 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -331,8 +331,6 @@
 			ctx->active.channel, ch);
 		return -EFAULT;
 	}
-	priv->switch_rxon.channel = cmd.channel;
-	priv->switch_rxon.switch_in_progress = true;
 
 	return iwl_send_cmd_sync(priv, &hcmd);
 }
@@ -423,7 +421,6 @@
 };
 static struct iwl_ht_params iwl5000_ht_params = {
 	.ht_greenfield_support = true,
-	.use_rts_for_aggregation = true, /* use rts/cts protection */
 };
 
 #define IWL_DEVICE_5000						\
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index eabf3b8..6e5ce44 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -270,8 +270,6 @@
 			ctx->active.channel, ch);
 		return -EFAULT;
 	}
-	priv->switch_rxon.channel = cmd.channel;
-	priv->switch_rxon.switch_in_progress = true;
 
 	return iwl_send_cmd_sync(priv, &hcmd);
 }
@@ -601,19 +599,27 @@
 	IWL_DEVICE_6050,
 };
 
+#define IWL_DEVICE_6150						\
+	.fw_name_pre = IWL6050_FW_PRE,				\
+	.ucode_api_max = IWL6050_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6050_UCODE_API_MIN,			\
+	.ops = &iwl6150_ops,					\
+	.eeprom_ver = EEPROM_6150_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,	\
+	.base_params = &iwl6050_base_params,			\
+	.need_dc_calib = true,					\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
+
 struct iwl_cfg iwl6150_bgn_cfg = {
 	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",
-	.fw_name_pre = IWL6050_FW_PRE,
-	.ucode_api_max = IWL6050_UCODE_API_MAX,
-	.ucode_api_min = IWL6050_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6150_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,
-	.ops = &iwl6150_ops,
-	.base_params = &iwl6050_base_params,
+	IWL_DEVICE_6150,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.internal_wimax_coex = true,
+};
+
+struct iwl_cfg iwl6150_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG",
+	IWL_DEVICE_6150,
 };
 
 struct iwl_cfg iwl6000_3agn_cfg = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
index 87fd05a..23eee0c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
@@ -163,17 +163,9 @@
 				     __le16 fc, __le32 *tx_flags)
 {
 	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS ||
-	    info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+	    info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT ||
+	    info->flags & IEEE80211_TX_CTL_AMPDU)
 		*tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
-		return;
-	}
-
-	if (priv->cfg->ht_params &&
-	    priv->cfg->ht_params->use_rts_for_aggregation &&
-	    info->flags & IEEE80211_TX_CTL_AMPDU) {
-		*tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
-		return;
-	}
 }
 
 /* Calc max signal level (dBm) among 3 possible receivers */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
index 18e6900..c8f6da8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
@@ -359,6 +359,14 @@
 			return 0;
 	}
 
+	/*
+	 * force CTS-to-self frames protection if RTS-CTS is not preferred
+	 * one aggregation protection method
+	 */
+	if (!(priv->cfg->ht_params &&
+	      priv->cfg->ht_params->use_rts_for_aggregation))
+		ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+
 	if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
 	    !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
 		ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
@@ -376,10 +384,10 @@
 	 * receive commit_rxon request
 	 * abort any previous channel switch if still in process
 	 */
-	if (priv->switch_rxon.switch_in_progress &&
-	    (priv->switch_rxon.channel != ctx->staging.channel)) {
+	if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) &&
+	    (priv->switch_channel != ctx->staging.channel)) {
 		IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
-		      le16_to_cpu(priv->switch_rxon.channel));
+			      le16_to_cpu(priv->switch_channel));
 		iwl_chswitch_done(priv, false);
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 96c7288..0b2d2cd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2926,16 +2926,13 @@
 		goto out;
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
-	    test_bit(STATUS_SCANNING, &priv->status))
+	    test_bit(STATUS_SCANNING, &priv->status) ||
+	    test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
 		goto out;
 
 	if (!iwl_is_associated_ctx(ctx))
 		goto out;
 
-	/* channel switch in progress */
-	if (priv->switch_rxon.switch_in_progress == true)
-		goto out;
-
 	if (priv->cfg->ops->lib->set_channel_switch) {
 
 		ch = channel->hw_value;
@@ -2984,15 +2981,19 @@
 			 * at this point, staging_rxon has the
 			 * configuration for channel switch
 			 */
+			set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+			priv->switch_channel = cpu_to_le16(ch);
 			if (priv->cfg->ops->lib->set_channel_switch(priv,
-								    ch_switch))
-				priv->switch_rxon.switch_in_progress = false;
+								    ch_switch)) {
+				clear_bit(STATUS_CHANNEL_SWITCH_PENDING,
+					  &priv->status);
+				priv->switch_channel = 0;
+				ieee80211_chswitch_done(ctx->vif, false);
+			}
 		}
 	}
 out:
 	mutex_unlock(&priv->mutex);
-	if (!priv->switch_rxon.switch_in_progress)
-		ieee80211_chswitch_done(ctx->vif, false);
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
@@ -3914,11 +3915,11 @@
 
 /* 6150 WiFi/WiMax Series */
 	{IWL_PCI_DEVICE(0x0885, 0x1305, iwl6150_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0885, 0x1306, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0885, 0x1307, iwl6150_bg_cfg)},
 	{IWL_PCI_DEVICE(0x0885, 0x1325, iwl6150_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0885, 0x1326, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0885, 0x1327, iwl6150_bg_cfg)},
 	{IWL_PCI_DEVICE(0x0886, 0x1315, iwl6150_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0886, 0x1316, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0886, 0x1317, iwl6150_bg_cfg)},
 
 /* 1000 Series WiFi */
 	{IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h
index 2495fe7..d171684 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.h
@@ -89,6 +89,7 @@
 extern struct iwl_cfg iwl6050_2agn_cfg;
 extern struct iwl_cfg iwl6050_2abg_cfg;
 extern struct iwl_cfg iwl6150_bgn_cfg;
+extern struct iwl_cfg iwl6150_bg_cfg;
 extern struct iwl_cfg iwl1000_bgn_cfg;
 extern struct iwl_cfg iwl1000_bg_cfg;
 extern struct iwl_cfg iwl100_bgn_cfg;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index de18916..5416b12 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -843,12 +843,8 @@
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
 
-	if (priv->switch_rxon.switch_in_progress) {
+	if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
 		ieee80211_chswitch_done(ctx->vif, is_success);
-		mutex_lock(&priv->mutex);
-		priv->switch_rxon.switch_in_progress = false;
-		mutex_unlock(&priv->mutex);
-	}
 }
 
 #ifdef CONFIG_IWLWIFI_DEBUG
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index b38477c..05ea88a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -558,6 +558,7 @@
 #define STATUS_POWER_PMI	16
 #define STATUS_FW_ERROR		17
 #define STATUS_DEVICE_ENABLED	18
+#define STATUS_CHANNEL_SWITCH_PENDING 19
 
 
 static inline int iwl_is_ready(struct iwl_priv *priv)
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 22a6e3e..c8de236 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -982,17 +982,6 @@
 };
 
 /*
- * iwl_switch_rxon: "channel switch" structure
- *
- * @ switch_in_progress: channel switch in progress
- * @ channel: new channel
- */
-struct iwl_switch_rxon {
-	bool switch_in_progress;
-	__le16 channel;
-};
-
-/*
  * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
  * to perform continuous uCode event logging operation if enabled
  */
@@ -1287,7 +1276,7 @@
 
 	struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
 
-	struct iwl_switch_rxon switch_rxon;
+	__le16 switch_channel;
 
 	struct {
 		u32 error_event_table;
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 0053e9e..b774517 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -250,19 +250,19 @@
 	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
 	struct iwl_rxon_cmd *rxon = (void *)&ctx->active;
 
-	if (priv->switch_rxon.switch_in_progress) {
-		if (!le32_to_cpu(csa->status) &&
-		    (csa->channel == priv->switch_rxon.channel)) {
-			rxon->channel = csa->channel;
-			ctx->staging.channel = csa->channel;
-			IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
+	if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+		return;
+
+	if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) {
+		rxon->channel = csa->channel;
+		ctx->staging.channel = csa->channel;
+		IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
 			      le16_to_cpu(csa->channel));
-			iwl_chswitch_done(priv, true);
-		} else {
-			IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
-			      le16_to_cpu(csa->channel));
-			iwl_chswitch_done(priv, false);
-		}
+		iwl_chswitch_done(priv, true);
+	} else {
+		IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+			le16_to_cpu(csa->channel));
+		iwl_chswitch_done(priv, false);
 	}
 }
 
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 84566db..71c8f3f 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -994,6 +994,8 @@
 	cmd = cmdnode->cmdbuf;
 
 	spin_lock_irqsave(&priv->driver_lock, flags);
+	priv->seqnum++;
+	cmd->seqnum = cpu_to_le16(priv->seqnum);
 	priv->cur_cmd = cmdnode;
 	spin_unlock_irqrestore(&priv->driver_lock, flags);
 
@@ -1621,11 +1623,9 @@
 	/* Copy the incoming command to the buffer */
 	memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size);
 
-	/* Set sequence number, clean result, move to buffer */
-	priv->seqnum++;
+	/* Set command, clean result, move to buffer */
 	cmdnode->cmdbuf->command = cpu_to_le16(command);
 	cmdnode->cmdbuf->size    = cpu_to_le16(in_cmd_size);
-	cmdnode->cmdbuf->seqnum  = cpu_to_le16(priv->seqnum);
 	cmdnode->cmdbuf->result  = 0;
 
 	lbs_deb_host("PREP_CMD: command 0x%04x\n", command);
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index a7b5cb0..224e985 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -907,7 +907,7 @@
 	card = sdio_get_drvdata(func);
 
 	cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret);
-	if (ret)
+	if (ret || !cause)
 		goto out;
 
 	lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause);
@@ -1008,10 +1008,6 @@
 	if (ret)
 		goto release;
 
-	ret = sdio_claim_irq(func, if_sdio_interrupt);
-	if (ret)
-		goto disable;
-
 	/* For 1-bit transfers to the 8686 model, we need to enable the
 	 * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
 	 * bit to allow access to non-vendor registers. */
@@ -1083,6 +1079,21 @@
 		card->rx_unit = 0;
 
 	/*
+	 * Set up the interrupt handler late.
+	 *
+	 * If we set it up earlier, the (buggy) hardware generates a spurious
+	 * interrupt, even before the interrupt has been enabled, with
+	 * CCCR_INTx = 0.
+	 *
+	 * We register the interrupt handler late so that we can handle any
+	 * spurious interrupts, and also to avoid generation of that known
+	 * spurious interrupt in the first place.
+	 */
+	ret = sdio_claim_irq(func, if_sdio_interrupt);
+	if (ret)
+		goto disable;
+
+	/*
 	 * Enable interrupts now that everything is set up
 	 */
 	sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret);
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 555180d..b704e5b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -250,7 +250,8 @@
 	if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL)
 		rt2x00link_reset_tuner(rt2x00dev, false);
 
-	if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
+	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+	    test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
 	    (ieee80211_flags & IEEE80211_CONF_CHANGE_PS) &&
 	    (conf->flags & IEEE80211_CONF_PS)) {
 		beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index c018d67a..939821b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -146,6 +146,9 @@
 	struct rt2x00_dev *rt2x00dev =
 	    container_of(work, struct rt2x00_dev, autowakeup_work.work);
 
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return;
+
 	if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 		ERROR(rt2x00dev, "Device failed to wakeup.\n");
 	clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
@@ -1160,6 +1163,7 @@
 	 * Stop all work.
 	 */
 	cancel_work_sync(&rt2x00dev->intf_work);
+	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
 	if (rt2x00_is_usb(rt2x00dev)) {
 		del_timer_sync(&rt2x00dev->txstatus_timer);
 		cancel_work_sync(&rt2x00dev->rxdone_work);
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 1ab6c86..c83fefb 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -1157,6 +1157,9 @@
 	/* time to wait on the channel for passive scans (in TUs) */
 	u32 dwell_time_passive;
 
+	/* time to wait on the channel for DFS scans (in TUs) */
+	u32 dwell_time_dfs;
+
 	/* number of probe requests to send on each channel in active scans */
 	u8 num_probe_reqs;
 
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index bc00e52..e6497dc 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -311,6 +311,7 @@
 		.min_dwell_time_active = 8,
 		.max_dwell_time_active = 30,
 		.dwell_time_passive    = 100,
+		.dwell_time_dfs        = 150,
 		.num_probe_reqs        = 2,
 		.rssi_threshold        = -90,
 		.snr_threshold         = 0,
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index f37e5a3..56f76ab 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -331,16 +331,22 @@
 	struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
 	int i, j;
 	u32 flags;
+	bool force_passive = !req->n_ssids;
 
 	for (i = 0, j = start;
 	     i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS;
 	     i++) {
 		flags = req->channels[i]->flags;
 
-		if (!(flags & IEEE80211_CHAN_DISABLED) &&
-		    ((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) &&
-		    ((flags & IEEE80211_CHAN_RADAR) == radar) &&
-		    (req->channels[i]->band == band)) {
+		if (force_passive)
+			flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+
+		if ((req->channels[i]->band == band) &&
+		    !(flags & IEEE80211_CHAN_DISABLED) &&
+		    (!!(flags & IEEE80211_CHAN_RADAR) == radar) &&
+		    /* if radar is set, we ignore the passive flag */
+		    (radar ||
+		     !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) {
 			wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
 				     req->channels[i]->band,
 				     req->channels[i]->center_freq);
@@ -350,7 +356,12 @@
 			wl1271_debug(DEBUG_SCAN, "max_power %d",
 				     req->channels[i]->max_power);
 
-			if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+			if (flags & IEEE80211_CHAN_RADAR) {
+				channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS;
+				channels[j].passive_duration =
+					cpu_to_le16(c->dwell_time_dfs);
+			}
+			else if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
 				channels[j].passive_duration =
 					cpu_to_le16(c->dwell_time_passive);
 			} else {
@@ -359,7 +370,7 @@
 				channels[j].max_duration =
 					cpu_to_le16(c->max_dwell_time_active);
 			}
-			channels[j].tx_power_att = req->channels[j]->max_power;
+			channels[j].tx_power_att = req->channels[i]->max_power;
 			channels[j].channel = req->channels[i]->hw_value;
 
 			j++;
@@ -386,7 +397,11 @@
 		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
 						    IEEE80211_BAND_2GHZ,
 						    false, false, idx);
-	idx += cfg->active[0];
+	/*
+	 * 5GHz channels always start at position 14, not immediately
+	 * after the last 2.4GHz channel
+	 */
+	idx = 14;
 
 	cfg->passive[1] =
 		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
@@ -394,22 +409,23 @@
 						    false, true, idx);
 	idx += cfg->passive[1];
 
-	cfg->active[1] =
-		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
-						    IEEE80211_BAND_5GHZ,
-						    false, false, 14);
-	idx += cfg->active[1];
-
 	cfg->dfs =
 		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
 						    IEEE80211_BAND_5GHZ,
-						    true, false, idx);
+						    true, true, idx);
 	idx += cfg->dfs;
 
+	cfg->active[1] =
+		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+						    IEEE80211_BAND_5GHZ,
+						    false, false, idx);
+	idx += cfg->active[1];
+
 	wl1271_debug(DEBUG_SCAN, "    2.4GHz: active %d passive %d",
 		     cfg->active[0], cfg->passive[0]);
 	wl1271_debug(DEBUG_SCAN, "    5GHz: active %d passive %d",
 		     cfg->active[1], cfg->passive[1]);
+	wl1271_debug(DEBUG_SCAN, "    DFS: %d", cfg->dfs);
 
 	return idx;
 }
@@ -421,6 +437,7 @@
 	struct wl1271_cmd_sched_scan_config *cfg = NULL;
 	struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
 	int i, total_channels, ret;
+	bool force_passive = !req->n_ssids;
 
 	wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config");
 
@@ -444,7 +461,7 @@
 	for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++)
 		cfg->intervals[i] = cpu_to_le32(req->interval);
 
-	if (req->ssids[0].ssid_len && req->ssids[0].ssid) {
+	if (!force_passive && req->ssids[0].ssid_len && req->ssids[0].ssid) {
 		cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC;
 		cfg->ssid_len = req->ssids[0].ssid_len;
 		memcpy(cfg->ssid, req->ssids[0].ssid,
@@ -461,7 +478,7 @@
 		goto out;
 	}
 
-	if (cfg->active[0]) {
+	if (!force_passive && cfg->active[0]) {
 		ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
 						 req->ssids[0].ssid_len,
 						 ies->ie[IEEE80211_BAND_2GHZ],
@@ -473,7 +490,7 @@
 		}
 	}
 
-	if (cfg->active[1]) {
+	if (!force_passive && cfg->active[1]) {
 		ret = wl1271_cmd_build_probe_req(wl,  req->ssids[0].ssid,
 						 req->ssids[0].ssid_len,
 						 ies->ie[IEEE80211_BAND_5GHZ],
diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/wl12xx/scan.h
index c833195..a0b6c5d 100644
--- a/drivers/net/wireless/wl12xx/scan.h
+++ b/drivers/net/wireless/wl12xx/scan.h
@@ -137,6 +137,9 @@
 	SCAN_BSS_TYPE_ANY,
 };
 
+#define SCAN_CHANNEL_FLAGS_DFS		BIT(0)
+#define SCAN_CHANNEL_FLAGS_DFS_ENABLED	BIT(1)
+
 struct conn_scan_ch_params {
 	__le16 min_duration;
 	__le16 max_duration;
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 0e81994..631194d 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1533,6 +1533,31 @@
 module_init(usb_init);
 module_exit(usb_exit);
 
+static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len,
+			      int *actual_length, int timeout)
+{
+	/* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in
+	 * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint
+	 * descriptor.
+	 */
+	struct usb_host_endpoint *ep;
+	unsigned int pipe;
+
+	pipe = usb_sndintpipe(udev, EP_REGS_OUT);
+	ep = usb_pipe_endpoint(udev, pipe);
+	if (!ep)
+		return -EINVAL;
+
+	if (usb_endpoint_xfer_int(&ep->desc)) {
+		return usb_interrupt_msg(udev, pipe, data, len,
+					 actual_length, timeout);
+	} else {
+		pipe = usb_sndbulkpipe(udev, EP_REGS_OUT);
+		return usb_bulk_msg(udev, pipe, data, len, actual_length,
+				    timeout);
+	}
+}
+
 static int usb_int_regs_length(unsigned int count)
 {
 	return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data);
@@ -1648,15 +1673,14 @@
 
 	udev = zd_usb_to_usbdev(usb);
 	prepare_read_regs_int(usb);
-	r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
-			      req, req_len, &actual_req_len, 50 /* ms */);
+	r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
 	if (r) {
 		dev_dbg_f(zd_usb_dev(usb),
-			"error in usb_interrupt_msg(). Error number %d\n", r);
+			"error in zd_ep_regs_out_msg(). Error number %d\n", r);
 		goto error;
 	}
 	if (req_len != actual_req_len) {
-		dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()\n"
+		dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n"
 			" req_len %d != actual_req_len %d\n",
 			req_len, actual_req_len);
 		r = -EIO;
@@ -1818,9 +1842,17 @@
 		rw->value = cpu_to_le16(ioreqs[i].value);
 	}
 
-	usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
-			 req, req_len, iowrite16v_urb_complete, usb,
-			 ep->desc.bInterval);
+	/* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode
+	 * endpoint is bulk. Select correct type URB by endpoint descriptor.
+	 */
+	if (usb_endpoint_xfer_int(&ep->desc))
+		usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
+				 req, req_len, iowrite16v_urb_complete, usb,
+				 ep->desc.bInterval);
+	else
+		usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT),
+				  req, req_len, iowrite16v_urb_complete, usb);
+
 	urb->transfer_flags |= URB_FREE_BUFFER;
 
 	/* Submit previous URB */
@@ -1924,15 +1956,14 @@
 	}
 
 	udev = zd_usb_to_usbdev(usb);
-	r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
-			      req, req_len, &actual_req_len, 50 /* ms */);
+	r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
 	if (r) {
 		dev_dbg_f(zd_usb_dev(usb),
-			"error in usb_interrupt_msg(). Error number %d\n", r);
+			"error in zd_ep_regs_out_msg(). Error number %d\n", r);
 		goto out;
 	}
 	if (req_len != actual_req_len) {
-		dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()"
+		dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()"
 			" req_len %d != actual_req_len %d\n",
 			req_len, actual_req_len);
 		r = -EIO;
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 82feb34..2a20dab 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -539,10 +539,12 @@
 	if (!pc->hostmode)
 		ssb_pcicore_init_clientmode(pc);
 
-	/* Additional always once-executed workarounds */
-	ssb_pcicore_serdes_workaround(pc);
-	/* TODO: ASPM */
-	/* TODO: Clock Request Update */
+	/* Additional PCIe always once-executed workarounds */
+	if (dev->id.coreid == SSB_DEV_PCIE) {
+		ssb_pcicore_serdes_workaround(pc);
+		/* TODO: ASPM */
+		/* TODO: Clock Request Update */
+	}
 }
 
 static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index b2eee58..bf56b6f 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1003,8 +1003,12 @@
 #define WLAN_CAPABILITY_ESS		(1<<0)
 #define WLAN_CAPABILITY_IBSS		(1<<1)
 
-/* A mesh STA sets the ESS and IBSS capability bits to zero */
-#define WLAN_CAPABILITY_IS_MBSS(cap)	\
+/*
+ * A mesh STA sets the ESS and IBSS capability bits to zero.
+ * however, this holds true for p2p probe responses (in the p2p_find
+ * phase) as well.
+ */
+#define WLAN_CAPABILITY_IS_STA_BSS(cap)	\
 	(!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
 
 #define WLAN_CAPABILITY_CF_POLLABLE	(1<<2)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index a86f9ba..e64a1c2 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -906,7 +906,7 @@
 		if (c->psm == psm) {
 			/* Exact match. */
 			if (!bacmp(&bt_sk(sk)->src, src)) {
-				read_unlock_bh(&chan_list_lock);
+				read_unlock(&chan_list_lock);
 				return c;
 			}
 
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 2025af5..090b0ec 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -775,9 +775,6 @@
 
 	int tx_headroom; /* required headroom for hardware/radiotap */
 
-	/* count for keys needing tailroom space allocation */
-	int crypto_tx_tailroom_needed_cnt;
-
 	/* Tasklet and skb queue to process calls from IRQ mode. All frames
 	 * added to skb_queue will be processed, but frames in
 	 * skb_queue_unreliable may be dropped if the total length of these
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 49d4f86..dee30ae 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1145,6 +1145,10 @@
 				+ IEEE80211_ENCRYPT_HEADROOM;
 	ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
 
+	ret = dev_alloc_name(ndev, ndev->name);
+	if (ret < 0)
+		goto fail;
+
 	ieee80211_assign_perm_addr(local, ndev, type);
 	memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
 	SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 31afd712..f825e2f 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -101,11 +101,6 @@
 
 	if (!ret) {
 		key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
-
-		if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
-		      (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
-			key->local->crypto_tx_tailroom_needed_cnt--;
-
 		return 0;
 	}
 
@@ -161,10 +156,6 @@
 			  key->conf.keyidx, sta ? sta->addr : bcast_addr, ret);
 
 	key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
-
-	if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
-	      (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
-		key->local->crypto_tx_tailroom_needed_cnt++;
 }
 
 void ieee80211_key_removed(struct ieee80211_key_conf *key_conf)
@@ -403,10 +394,8 @@
 		ieee80211_aes_key_free(key->u.ccmp.tfm);
 	if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC)
 		ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm);
-	if (key->local) {
+	if (key->local)
 		ieee80211_debugfs_key_remove(key);
-		key->local->crypto_tx_tailroom_needed_cnt--;
-	}
 
 	kfree(key);
 }
@@ -468,8 +457,6 @@
 
 	ieee80211_debugfs_key_add(key);
 
-	key->local->crypto_tx_tailroom_needed_cnt++;
-
 	ret = ieee80211_key_enable_hw_accel(key);
 
 	mutex_unlock(&sdata->local->key_mtx);
@@ -511,12 +498,8 @@
 
 	mutex_lock(&sdata->local->key_mtx);
 
-	sdata->local->crypto_tx_tailroom_needed_cnt = 0;
-
-	list_for_each_entry(key, &sdata->key_list, list) {
-		sdata->local->crypto_tx_tailroom_needed_cnt++;
+	list_for_each_entry(key, &sdata->key_list, list)
 		ieee80211_key_enable_hw_accel(key);
-	}
 
 	mutex_unlock(&sdata->local->key_mtx);
 }
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 64e0f75..3104c84 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1480,7 +1480,12 @@
 {
 	int tail_need = 0;
 
-	if (may_encrypt && local->crypto_tx_tailroom_needed_cnt) {
+	/*
+	 * This could be optimised, devices that do full hardware
+	 * crypto (including TKIP MMIC) need no tailroom... But we
+	 * have no drivers for such devices currently.
+	 */
+	if (may_encrypt) {
 		tail_need = IEEE80211_ENCRYPT_TAILROOM;
 		tail_need -= skb_tailroom(skb);
 		tail_need = max_t(int, tail_need, 0);
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 73a441d..7a6c676 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -267,13 +267,35 @@
 	return memcmp(ssidie + 2, ssid, ssid_len) == 0;
 }
 
+static bool is_mesh_bss(struct cfg80211_bss *a)
+{
+	const u8 *ie;
+
+	if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability))
+		return false;
+
+	ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
+			      a->information_elements,
+			      a->len_information_elements);
+	if (!ie)
+		return false;
+
+	ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
+			      a->information_elements,
+			      a->len_information_elements);
+	if (!ie)
+		return false;
+
+	return true;
+}
+
 static bool is_mesh(struct cfg80211_bss *a,
 		    const u8 *meshid, size_t meshidlen,
 		    const u8 *meshcfg)
 {
 	const u8 *ie;
 
-	if (!WLAN_CAPABILITY_IS_MBSS(a->capability))
+	if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability))
 		return false;
 
 	ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
@@ -311,7 +333,7 @@
 	if (a->channel != b->channel)
 		return b->channel->center_freq - a->channel->center_freq;
 
-	if (WLAN_CAPABILITY_IS_MBSS(a->capability | b->capability)) {
+	if (is_mesh_bss(a) && is_mesh_bss(b)) {
 		r = cmp_ies(WLAN_EID_MESH_ID,
 			    a->information_elements,
 			    a->len_information_elements,
@@ -457,7 +479,6 @@
 		    struct cfg80211_internal_bss *res)
 {
 	struct cfg80211_internal_bss *found = NULL;
-	const u8 *meshid, *meshcfg;
 
 	/*
 	 * The reference to "res" is donated to this function.
@@ -470,22 +491,6 @@
 
 	res->ts = jiffies;
 
-	if (WLAN_CAPABILITY_IS_MBSS(res->pub.capability)) {
-		/* must be mesh, verify */
-		meshid = cfg80211_find_ie(WLAN_EID_MESH_ID,
-					  res->pub.information_elements,
-					  res->pub.len_information_elements);
-		meshcfg = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
-					   res->pub.information_elements,
-					   res->pub.len_information_elements);
-		if (!meshid || !meshcfg ||
-		    meshcfg[1] != sizeof(struct ieee80211_meshconf_ie)) {
-			/* bogus mesh */
-			kref_put(&res->ref, bss_release);
-			return NULL;
-		}
-	}
-
 	spin_lock_bh(&dev->bss_lock);
 
 	found = rb_find_bss(dev, res);