ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins
Otherwise omap_device_build() and omap_mux related functions
can't be marked as __init when twl is build as a module.
If a board is using GPIO pins or regulators configured by an
external chip, such as TWL PMIC on I2C bus, the board must
mark those MMC controllers as deferred. Additionally both
omap_hsmmc_init() and omap_hsmmc_late_init() must be called
by the board.
For MMC controllers using internal GPIO pins for card
detect and regulators the slots don't need to be marked
deferred. In this case calling omap_hsmmc_init() is sufficient.
Only mark the MMC slots using gpio_cd or gpio_wd as deferred
as noted by Igor Grinberg <grinberg@compulab.co.il>.
Note that this patch does not change the behaviour for
board-4430sdp.c board-omap4panda.c. These boards wrongly
rely on the omap_hsmmc.c init function callback to configure
the PMIC GPIO interrupt lines on external chip. If the PMIC
interrupt lines are not configured during init, they will
fail.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 7370983..c8bda62 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -279,7 +279,7 @@
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
omap2_usbfs_init(&sdp2430_usb_config);
omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 383717b..da75f23 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -232,11 +232,13 @@
*/
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 4,
+ .deferred = true,
},
{
.mmc = 2,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 7,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -249,7 +251,7 @@
*/
mmc[0].gpio_cd = gpio + 0;
mmc[1].gpio_cd = gpio + 1;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
@@ -606,6 +608,7 @@
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+ omap_hsmmc_init(mmc);
omap3430_i2c_init();
omap_display_init(&sdp3430_dss_data);
if (omap_rev() > OMAP3430_REV_ES1_0)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 4e90715..09ae257 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -491,9 +491,9 @@
{
struct omap2_hsmmc_info *c;
- omap2_hsmmc_init(controllers);
+ omap_hsmmc_init(controllers);
for (c = controllers; c->mmc; c++)
- omap4_twl6030_hsmmc_set_late_init(c->dev);
+ omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
return 0;
}
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 4b1cfe3..71138a1 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -504,7 +504,7 @@
am3517_evm_musb_init();
/* MMC init function */
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
}
MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index d73316e..49e6405 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -413,7 +413,7 @@
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
-
+ .deferred = true,
},
{
.mmc = 2,
@@ -471,7 +471,7 @@
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
return 0;
}
@@ -639,6 +639,7 @@
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
+ omap_hsmmc_init(mmc);
cm_t35_init_i2c();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index e873063..11cd2a8 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -100,6 +100,7 @@
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -228,7 +229,7 @@
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -636,6 +637,7 @@
omap_dm9000_init();
+ omap_hsmmc_init(mmc);
devkit8000_i2c_init();
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index a59ace0..e558800 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -295,6 +295,7 @@
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
+ .deferred = true,
},
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
{
@@ -402,7 +403,7 @@
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
@@ -639,6 +640,9 @@
/* Get IGEP2 hardware revision */
igep2_get_revision();
+
+ omap_hsmmc_init(mmc);
+
/* Register I2C busses and drivers */
igep_i2c_init();
platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 2d2a61f..b5bc9b2e 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -424,7 +424,7 @@
board_nand_init(ldp_nand_partitions,
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
ldp_display_init();
}
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 7ffcd28..78bfcd5 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -253,6 +253,7 @@
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -277,7 +278,7 @@
mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/*
* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
@@ -521,6 +522,7 @@
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
+ omap_hsmmc_init(mmc);
omap3_beagle_i2c_init();
gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c775bead..3d585b8 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -317,6 +317,7 @@
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 63,
+ .deferred = true,
},
#ifdef CONFIG_WL12XX_PLATFORM_DATA
{
@@ -363,7 +364,7 @@
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
@@ -644,6 +645,7 @@
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+ omap_hsmmc_init(mmc);
omap3_evm_i2c_init();
omap_display_init(&omap3_evm_dss_data);
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 4198dd0..2304ba3 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -128,7 +128,7 @@
return;
}
- omap2_hsmmc_init(board_mmc_info);
+ omap_hsmmc_init(board_mmc_info);
}
static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1644b73..ace466b 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -273,6 +273,7 @@
.gpio_cd = -EINVAL,
.gpio_wp = 126,
.ext_clock = 0,
+ .deferred = true,
},
{
.mmc = 2,
@@ -281,6 +282,7 @@
.gpio_wp = 127,
.ext_clock = 1,
.transceiver = true,
+ .deferred = true,
},
{
.mmc = 3,
@@ -300,7 +302,7 @@
/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
omap3pandora_mmc[0].gpio_cd = gpio + 0;
omap3pandora_mmc[1].gpio_cd = gpio + 1;
- omap2_hsmmc_init(omap3pandora_mmc);
+ omap_hsmmc_late_init(omap3pandora_mmc);
/* gpio + 13 drives 32kHz buffer for wifi module */
gpio_32khz = gpio + 13;
@@ -580,6 +582,7 @@
static void __init omap3pandora_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ omap_hsmmc_init(omap3pandora_mmc);
omap3pandora_i2c_init();
pandora_wl1251_init();
platform_add_devices(omap3pandora_devices,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index cb089a4..8eee993 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -209,10 +209,11 @@
static struct omap2_hsmmc_info mmc[] = {
{
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = 23,
+ .mmc = 1,
+ .caps = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = 23,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -284,7 +285,7 @@
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
@@ -425,6 +426,7 @@
omap_board_config = omap3_stalker_config;
omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
+ omap_hsmmc_init(mmc);
omap3_stalker_i2c_init();
platform_add_devices(omap3_stalker_devices,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index a0b851a..ba9c118 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -100,6 +100,7 @@
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -125,7 +126,7 @@
}
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
@@ -351,6 +352,7 @@
pm_power_off = omap3_touchbook_poweroff;
+ omap_hsmmc_init(mmc);
omap3_touchbook_i2c_init();
platform_add_devices(omap3_touchbook_devices,
ARRAY_SIZE(omap3_touchbook_devices));
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 28fc271..bcc563c 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -245,9 +245,9 @@
{
struct omap2_hsmmc_info *c;
- omap2_hsmmc_init(controllers);
+ omap_hsmmc_init(controllers);
for (c = controllers; c->mmc; c++)
- omap4_twl6030_hsmmc_set_late_init(c->dev);
+ omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
return 0;
}
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 52c0cef..668533e 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -407,8 +407,6 @@
static int overo_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- omap2_hsmmc_init(mmc);
-
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -505,6 +503,7 @@
int ret;
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ omap_hsmmc_init(mmc);
overo_i2c_init();
omap_display_init(&overo_dss_data);
omap_serial_init();
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 8678b38..2d24c98 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -120,7 +120,7 @@
ARRAY_SIZE(rm680_peripherals_devices));
rm680_i2c_init();
gpmc_onenand_init(board_onenand_data);
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
}
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index acb4e77..0e9d89a20 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1145,7 +1145,7 @@
partition = omap_mux_get("core");
if (partition)
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
rx51_charger_init();
}
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index c126461..3d39cdb 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -205,6 +205,7 @@
.caps = MMC_CAP_4_BIT_DATA,
.gpio_wp = -EINVAL,
.power_saving = true,
+ .deferred = true,
},
{
.name = "internal",
@@ -233,7 +234,7 @@
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
"lcd enable");
@@ -301,6 +302,7 @@
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
+ omap_hsmmc_init(mmc);
omap_i2c_init();
platform_device_register(&omap_vwlan_device);
usb_musb_init(NULL);
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 19dd165..efb2fcb 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -429,66 +429,131 @@
}
static int omap_hsmmc_done;
+
+void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
+{
+ struct platform_device *pdev;
+ struct omap_mmc_platform_data *mmc_pdata;
+ int res;
+
+ if (omap_hsmmc_done != 1)
+ return;
+
+ omap_hsmmc_done++;
+
+ for (; c->mmc; c++) {
+ if (!c->deferred)
+ continue;
+
+ pdev = c->pdev;
+ if (!pdev)
+ continue;
+
+ mmc_pdata = pdev->dev.platform_data;
+ if (!mmc_pdata)
+ continue;
+
+ mmc_pdata->slots[0].switch_pin = c->gpio_cd;
+ mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
+
+ res = omap_device_register(pdev);
+ if (res)
+ pr_err("Could not late init MMC %s\n",
+ c->name);
+ }
+}
+
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
-void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
+static void omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
+ int ctrl_nr)
{
struct omap_hwmod *oh;
+ struct omap_hwmod *ohs[1];
+ struct omap_device *od;
struct platform_device *pdev;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
struct omap_mmc_platform_data *mmc_data;
struct omap_mmc_dev_attr *mmc_dev_attr;
char *name;
- int l;
+ int res;
mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
if (!mmc_data) {
pr_err("Cannot allocate memory for mmc device!\n");
- goto done;
+ return;
}
- if (omap_hsmmc_pdata_init(hsmmcinfo, mmc_data) < 0) {
- pr_err("%s fails!\n", __func__);
- goto done;
- }
+ res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data);
+ if (res < 0)
+ goto free_mmc;
+
omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
name = "omap_hsmmc";
-
- l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
+ res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
"mmc%d", ctrl_nr);
- WARN(l >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
+ WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
"String buffer overflow in MMC%d device setup\n", ctrl_nr);
+
oh = omap_hwmod_lookup(oh_name);
if (!oh) {
pr_err("Could not look up %s\n", oh_name);
- kfree(mmc_data->slots[0].name);
- goto done;
+ goto free_name;
}
-
+ ohs[0] = oh;
if (oh->dev_attr != NULL) {
mmc_dev_attr = oh->dev_attr;
mmc_data->controller_flags = mmc_dev_attr->flags;
}
- pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
- sizeof(struct omap_mmc_platform_data), NULL, 0, false);
- if (IS_ERR(pdev)) {
- WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
- kfree(mmc_data->slots[0].name);
- goto done;
+ pdev = platform_device_alloc(name, ctrl_nr - 1);
+ if (!pdev) {
+ pr_err("Could not allocate pdev for %s\n", name);
+ goto free_name;
}
- /*
- * return device handle to board setup code
- * required to populate for regulator framework structure
- */
- hsmmcinfo->dev = &pdev->dev;
+ dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
-done:
+ od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
+ if (!od) {
+ pr_err("Could not allocate od for %s\n", name);
+ goto put_pdev;
+ }
+
+ res = platform_device_add_data(pdev, mmc_data,
+ sizeof(struct omap_mmc_platform_data));
+ if (res) {
+ pr_err("Could not add pdata for %s\n", name);
+ goto put_pdev;
+ }
+
+ hsmmcinfo->pdev = pdev;
+
+ if (hsmmcinfo->deferred)
+ goto free_mmc;
+
+ res = omap_device_register(pdev);
+ if (res) {
+ pr_err("Could not register od for %s\n", name);
+ goto free_od;
+ }
+
+ goto free_mmc;
+
+free_od:
+ omap_device_delete(od);
+
+put_pdev:
+ platform_device_put(pdev);
+
+free_name:
+ kfree(mmc_data->slots[0].name);
+
+free_mmc:
kfree(mmc_data);
}
-void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
+void omap_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
u32 reg;
@@ -521,7 +586,7 @@
}
for (; controllers->mmc; controllers++)
- omap_init_hsmmc(controllers, controllers->mmc);
+ omap_hsmmc_init_one(controllers, controllers->mmc);
}
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index c440973..07831cc 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -21,10 +21,11 @@
bool no_off; /* power_saving and power is not to go off */
bool no_off_init; /* no power off when not in MMC sleep state */
bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
+ bool deferred; /* mmc needs a deferred probe */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
- struct device *dev; /* returned: pointer to mmc adapter */
+ struct platform_device *pdev; /* mmc controller instance */
int ocr_mask; /* temporary HACK */
/* Remux (pad configuration) when powering on/off */
void (*remux)(struct device *dev, int slot, int power_on);
@@ -34,11 +35,16 @@
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-void omap2_hsmmc_init(struct omap2_hsmmc_info *);
+void omap_hsmmc_init(struct omap2_hsmmc_info *);
+void omap_hsmmc_late_init(struct omap2_hsmmc_info *);
#else
-static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info)
+static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info)
+{
+}
+
+static inline void omap_hsmmc_late_init(struct omap2_hsmmc_info *info)
{
}