spi: au1550_spi: proper platform device
Remove the Au1550 resource table and instead extract MMIO/IRQ/DMA
resources from platform resource information like any well-behaved
platform driver.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 072c4a5..3860dd2 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -26,6 +26,7 @@
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/resource.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/dma-mapping.h>
@@ -81,6 +82,7 @@
struct spi_master *master;
struct device *dev;
struct au1550_spi_info *pdata;
+ struct resource *ioarea;
};
@@ -96,6 +98,8 @@
.dev_intpolarity = 0
};
+static int ddma_memid; /* id to above mem dma device */
+
static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw);
@@ -732,6 +736,7 @@
{
struct au1550_spi *hw;
struct spi_master *master;
+ struct resource *r;
int err = 0;
master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi));
@@ -753,6 +758,52 @@
goto err_no_pdata;
}
+ r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no IRQ\n");
+ err = -ENODEV;
+ goto err_no_iores;
+ }
+ hw->irq = r->start;
+
+ hw->usedma = 0;
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (r) {
+ hw->dma_tx_id = r->start;
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (r) {
+ hw->dma_rx_id = r->start;
+ if (usedma && ddma_memid) {
+ if (pdev->dev.dma_mask == NULL)
+ dev_warn(&pdev->dev, "no dma mask\n");
+ else
+ hw->usedma = 1;
+ }
+ }
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no mmio resource\n");
+ err = -ENODEV;
+ goto err_no_iores;
+ }
+
+ hw->ioarea = request_mem_region(r->start, sizeof(psc_spi_t),
+ pdev->name);
+ if (!hw->ioarea) {
+ dev_err(&pdev->dev, "Cannot reserve iomem region\n");
+ err = -ENXIO;
+ goto err_no_iores;
+ }
+
+ hw->regs = (psc_spi_t __iomem *)ioremap(r->start, sizeof(psc_spi_t));
+ if (!hw->regs) {
+ dev_err(&pdev->dev, "cannot ioremap\n");
+ err = -ENXIO;
+ goto err_ioremap;
+ }
+
platform_set_drvdata(pdev, hw);
init_completion(&hw->master_done);
@@ -763,66 +814,8 @@
hw->bitbang.master->setup = au1550_spi_setup;
hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
- switch (hw->pdata->bus_num) {
- case 0:
- hw->irq = AU1550_PSC0_INT;
- hw->regs = (volatile psc_spi_t *)PSC0_BASE_ADDR;
- hw->dma_rx_id = DSCR_CMD0_PSC0_RX;
- hw->dma_tx_id = DSCR_CMD0_PSC0_TX;
- break;
- case 1:
- hw->irq = AU1550_PSC1_INT;
- hw->regs = (volatile psc_spi_t *)PSC1_BASE_ADDR;
- hw->dma_rx_id = DSCR_CMD0_PSC1_RX;
- hw->dma_tx_id = DSCR_CMD0_PSC1_TX;
- break;
- case 2:
- hw->irq = AU1550_PSC2_INT;
- hw->regs = (volatile psc_spi_t *)PSC2_BASE_ADDR;
- hw->dma_rx_id = DSCR_CMD0_PSC2_RX;
- hw->dma_tx_id = DSCR_CMD0_PSC2_TX;
- break;
- case 3:
- hw->irq = AU1550_PSC3_INT;
- hw->regs = (volatile psc_spi_t *)PSC3_BASE_ADDR;
- hw->dma_rx_id = DSCR_CMD0_PSC3_RX;
- hw->dma_tx_id = DSCR_CMD0_PSC3_TX;
- break;
- default:
- dev_err(&pdev->dev, "Wrong bus_num of SPI\n");
- err = -ENOENT;
- goto err_no_pdata;
- }
-
- if (request_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t),
- pdev->name) == NULL) {
- dev_err(&pdev->dev, "Cannot reserve iomem region\n");
- err = -ENXIO;
- goto err_no_iores;
- }
-
-
- if (usedma) {
- if (pdev->dev.dma_mask == NULL)
- dev_warn(&pdev->dev, "no dma mask\n");
- else
- hw->usedma = 1;
- }
-
if (hw->usedma) {
- /*
- * create memory device with 8 bits dev_devwidth
- * needed for proper byte ordering to spi fifo
- */
- int memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
- if (!memid) {
- dev_err(&pdev->dev,
- "Cannot create dma 8 bit mem device\n");
- err = -ENXIO;
- goto err_dma_add_dev;
- }
-
- hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(memid,
+ hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(ddma_memid,
hw->dma_tx_id, NULL, (void *)hw);
if (hw->dma_tx_ch == 0) {
dev_err(&pdev->dev,
@@ -841,7 +834,7 @@
hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id,
- memid, NULL, (void *)hw);
+ ddma_memid, NULL, (void *)hw);
if (hw->dma_rx_ch == 0) {
dev_err(&pdev->dev,
"Cannot allocate rx dma channel\n");
@@ -874,7 +867,7 @@
goto err_no_irq;
}
- master->bus_num = hw->pdata->bus_num;
+ master->bus_num = pdev->id;
master->num_chipselect = hw->pdata->num_chipselect;
/*
@@ -924,8 +917,11 @@
au1xxx_dbdma_chan_free(hw->dma_tx_ch);
err_no_txdma:
-err_dma_add_dev:
- release_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t));
+ iounmap((void __iomem *)hw->regs);
+
+err_ioremap:
+ release_resource(hw->ioarea);
+ kfree(hw->ioarea);
err_no_iores:
err_no_pdata:
@@ -944,7 +940,9 @@
spi_bitbang_stop(&hw->bitbang);
free_irq(hw->irq, hw);
- release_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t));
+ iounmap((void __iomem *)hw->regs);
+ release_resource(hw->ioarea);
+ kfree(hw->ioarea);
if (hw->usedma) {
au1550_spi_dma_rxtmp_free(hw);
@@ -971,12 +969,24 @@
static int __init au1550_spi_init(void)
{
+ /*
+ * create memory device with 8 bits dev_devwidth
+ * needed for proper byte ordering to spi fifo
+ */
+ if (usedma) {
+ ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
+ if (!ddma_memid)
+ printk(KERN_ERR "au1550-spi: cannot add memory"
+ "dbdma device\n");
+ }
return platform_driver_probe(&au1550_spi_drv, au1550_spi_probe);
}
module_init(au1550_spi_init);
static void __exit au1550_spi_exit(void)
{
+ if (usedma && ddma_memid)
+ au1xxx_ddma_del_device(ddma_memid);
platform_driver_unregister(&au1550_spi_drv);
}
module_exit(au1550_spi_exit);